diff options
Diffstat (limited to 'configs/platform-v7a/barebox.config')
| -rw-r--r-- | configs/platform-v7a/barebox.config | 67 |
1 files changed, 65 insertions, 2 deletions
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config index b78a616..adbbc37 100644 --- a/configs/platform-v7a/barebox.config +++ b/configs/platform-v7a/barebox.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2019.07.0 Configuration +# Barebox/arm 2019.08.1 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -29,7 +29,7 @@ CONFIG_ARCH_BCM283X=y # CONFIG_ARCH_S3C24xx is not set # CONFIG_ARCH_S5PCxx is not set # CONFIG_ARCH_S3C64xx is not set -# CONFIG_ARCH_STM32MP1 is not set +# CONFIG_ARCH_STM32MP is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_TEGRA is not set @@ -59,10 +59,13 @@ CONFIG_MACH_RPI_COMMON=y # CONFIG_MACH_RPI2 is not set CONFIG_MACH_RPI3=y # CONFIG_MACH_RPI_CM3 is not set +# end of select Broadcom BCM283X boards to be built + CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff CONFIG_AEABI=y # CONFIG_THUMB2_BAREBOX is not set # CONFIG_ARM_BOARD_APPEND_ATAG is not set +# end of System Type # # ARM specific settings @@ -74,6 +77,8 @@ CONFIG_ARM_UNWIND=y CONFIG_ARM_SMCCC=y CONFIG_ARM_SECURE_MONITOR=y # CONFIG_ARM_PSCI is not set +# end of ARM specific settings + CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y @@ -125,6 +130,8 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff CONFIG_STACK_SIZE=0x8000 CONFIG_MALLOC_SIZE=0x0 +# end of memory layout + # CONFIG_EXPERIMENTAL is not set # CONFIG_MALLOC_DLMALLOC is not set CONFIG_MALLOC_TLSF=y @@ -193,6 +200,7 @@ CONFIG_STATE=y # CONFIG_STATE_BACKWARD_COMPATIBLE is not set # CONFIG_BOOTCHOOSER is not set CONFIG_RESET_SOURCE=y +# end of General Settings # # Debugging @@ -201,6 +209,9 @@ CONFIG_COMPILE_LOGLEVEL=7 CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_PBL_BREAK is not set +# end of Debugging + CONFIG_HAS_DEBUG_LL=y CONFIG_COMMAND_SUPPORT=y CONFIG_COMPILE_HASH=y @@ -225,6 +236,7 @@ CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_VERSION=y # CONFIG_CMD_MMC_EXTCSD is not set +# end of Information # # Boot @@ -239,6 +251,7 @@ CONFIG_CMD_GO=y # CONFIG_CMD_LOADY is not set CONFIG_CMD_RESET=y CONFIG_CMD_UIMAGE=y +# end of Boot # # Partition @@ -247,6 +260,7 @@ CONFIG_CMD_PARTITION=y CONFIG_CMD_AUTOMOUNT=y CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y +# end of Partition # # Environment @@ -260,6 +274,7 @@ CONFIG_CMD_PRINTENV=y CONFIG_CMD_MAGICVAR=y CONFIG_CMD_MAGICVAR_HELP=y CONFIG_CMD_SAVEENV=y +# end of Environment # # File @@ -286,6 +301,7 @@ CONFIG_CMD_SHA1SUM=y # CONFIG_CMD_SHA384SUM is not set # CONFIG_CMD_SHA512SUM is not set CONFIG_CMD_UNCOMPRESS=y +# end of File # # Shell scripting @@ -298,6 +314,7 @@ CONFIG_CMD_READF=y CONFIG_CMD_SLEEP=y CONFIG_CMD_TEST=y CONFIG_CMD_TRUE=y +# end of Shell scripting # # Network @@ -309,6 +326,7 @@ CONFIG_NET_CMD_IFUP=y CONFIG_CMD_PING=y CONFIG_CMD_TFTP=y CONFIG_CMD_IP_ROUTE_GET=y +# end of Network # # Console and Framebuffer interaction @@ -323,6 +341,7 @@ CONFIG_CMD_MENU=y CONFIG_CMD_MENUTREE=y CONFIG_CMD_READLINE=y CONFIG_CMD_TIMEOUT=y +# end of Console and Framebuffer interaction # # Memory @@ -336,6 +355,7 @@ CONFIG_CMD_MEMSET=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MM=y CONFIG_CMD_MW=y +# end of Memory # # Hardware manipulation @@ -353,6 +373,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_USBGADGET=y CONFIG_CMD_WD=y CONFIG_CMD_WD_DEFAULT_TIMOUT=0 +# end of Hardware manipulation # # Miscellaneous @@ -372,6 +393,9 @@ CONFIG_CMD_STATE=y # CONFIG_CMD_DHRYSTONE is not set # CONFIG_CMD_SPD_DECODE is not set # CONFIG_CMD_SEED is not set +# end of Miscellaneous +# end of Commands + CONFIG_NET=y CONFIG_NET_NFS=y # CONFIG_NET_NETCONSOLE is not set @@ -402,6 +426,8 @@ CONFIG_ARM_AMBA=y # CONFIG_SERIAL_AMBA_PL011 is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set # CONFIG_DRIVER_SERIAL_CADENCE is not set +# end of serial drivers + CONFIG_PHYLIB=y # @@ -441,9 +467,12 @@ CONFIG_PHYLIB=y # # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set +# end of phylib + CONFIG_NET_USB=y CONFIG_NET_USB_ASIX=y CONFIG_NET_USB_SMSC95XX=y +# end of Network drivers # # SPI drivers @@ -451,6 +480,8 @@ CONFIG_NET_USB_SMSC95XX=y CONFIG_SPI=y # CONFIG_SPI_MEM is not set CONFIG_DRIVER_SPI_GPIO=y +# end of SPI drivers + CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y @@ -460,6 +491,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_GPIO=y # CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_MV64XXX is not set +# end of I2C Hardware Bus support + # CONFIG_I2C_MUX is not set CONFIG_MTD=y CONFIG_MTD_WRITE=y @@ -479,6 +512,8 @@ CONFIG_MTD_OOB_DEVICE=y # CONFIG_MTD_M25P80 is not set # CONFIG_MTD_DOCG3 is not set # CONFIG_MTD_MTDRAM is not set +# end of Self contained MTD devices + # CONFIG_DRIVER_CFI is not set # CONFIG_NAND is not set # CONFIG_MTD_SPI_NOR is not set @@ -549,6 +584,7 @@ CONFIG_CLOCKSOURCE_BCM283X=y CONFIG_CLOCKSOURCE_DUMMY_RATE=1000 CONFIG_CLOCKSOURCE_ARMV8_TIMER=y # CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set +# end of Clocksource # # MFD @@ -564,6 +600,7 @@ CONFIG_CLOCKSOURCE_ARMV8_TIMER=y # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TWL4030 is not set # CONFIG_MFD_TWL6030 is not set +# end of MFD # # Misc devices @@ -573,6 +610,8 @@ CONFIG_CLOCKSOURCE_ARMV8_TIMER=y CONFIG_STATE_DRV=y CONFIG_DEV_MEM=y # CONFIG_UBOOTVAR is not set +# end of Misc devices + CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_LED_GPIO_OF=y @@ -586,6 +625,7 @@ CONFIG_LED_TRIGGERS=y # # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_AT24 is not set +# end of EEPROM support # # Input device support @@ -593,6 +633,8 @@ CONFIG_LED_TRIGGERS=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_USB is not set +# end of Input device support + CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_POLLER is not set # CONFIG_WATCHDOG_DW is not set @@ -603,6 +645,8 @@ CONFIG_HWRNG=y # # DMA support # +# end of DMA support + CONFIG_GPIOLIB=y # @@ -615,6 +659,8 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_PL061 is not set # CONFIG_GPIO_DESIGNWARE is not set # CONFIG_GPIO_SX150X is not set +# end of GPIO + # CONFIG_W1 is not set # @@ -623,11 +669,15 @@ CONFIG_GPIOLIB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_BCM283X is not set # CONFIG_PINCTRL_SINGLE is not set +# end of Pin controllers + # CONFIG_NVMEM is not set # # Bus devices # +# end of Bus devices + CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED is not set CONFIG_REGULATOR_BCM283X=y @@ -638,20 +688,26 @@ CONFIG_REGULATOR_BCM283X=y # Firmware Drivers # # CONFIG_FIRMWARE_ALTERA_SERIAL is not set +# end of Firmware Drivers + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set # # Memory controller drivers # +# end of Memory controller drivers # # i.MX SoC drivers # +# end of i.MX SoC drivers # # NVME Support # +# end of NVME Support +# end of Drivers # # Filesystem support @@ -700,6 +756,7 @@ CONFIG_FS_FAT_LFN=y # # ZSTD support disabled # +# end of Filesystem support # # Library routines @@ -730,9 +787,12 @@ CONFIG_QSORT=y # # Library gui routines # +# end of Library gui routines + # CONFIG_BAREBOX_LOGO is not set # CONFIG_NLS is not set # CONFIG_BLOBGEN is not set +# end of Library routines # # Crypto support @@ -752,13 +812,16 @@ CONFIG_DIGEST_SHA1_GENERIC=y # CONFIG_DIGEST_SHA1_ARM is not set # CONFIG_DIGEST_SHA256_ARM is not set # CONFIG_CRYPTO_KEYSTORE is not set +# end of Crypto support # # Firmware files # CONFIG_EXTRA_FIRMWARE_DIR="firmware" +# end of Firmware files # # Host Tools # # CONFIG_COMPILE_HOST_TOOLS is not set +# end of Host Tools |