summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
diff options
context:
space:
mode:
Diffstat (limited to 'configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts')
-rw-r--r--configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts362
1 files changed, 0 insertions, 362 deletions
diff --git a/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts b/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
deleted file mode 100644
index d65c823..0000000
--- a/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-/dts-v1/;
-
-#include "stm32mp157.dtsi"
-#include "stm32mp15xx-osd32.dtsi"
-#include "stm32mp15xxac-pinctrl.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Linux Automation MC-1 board";
- compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
-
- aliases {
- ethernet0 = &ethernet0;
- mmc0 = &sdmmc1;
- mmc1 = &sdmmc2;
- serial0 = &uart4;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 31 63 95 127 159 191 223 255>;
- default-brightness-level = <7>;
- power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
- };
-
- chosen {
- stdout-path = &uart4;
- };
-
- led-act {
- compatible = "gpio-leds";
-
- led-green {
- label = "mc1:green:act";
- gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- led-rgb {
- compatible = "pwm-leds";
-
- led-red {
- label = "mc1:red:rgb";
- pwms = <&leds_pwm 1 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
-
- led-green {
- label = "mc1:green:rgb";
- pwms = <&leds_pwm 2 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
-
- led-blue {
- label = "mc1:blue:rgb";
- pwms = <&leds_pwm 3 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
- };
-
- panel: panel {
- compatible = "edt,etm0700g0edh6", "simple-panel";
- backlight = <&backlight>;
- enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
- power-supply = <&reg_3v3>;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&ltdc_ep0_out>;
- };
- };
- };
-
- reg_3v3: regulator_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&v3v3>;
- };
-
- /* supplied by either debug board or PoE */
- reg_5v2: regulator_5v2 {
- compatible = "regulator-fixed";
- regulator-name = "5V2";
- regulator-min-microvolt = <5200000>;
- regulator-max-microvolt = <5200000>;
- regulator-always-on;
- };
-};
-
-&ethernet0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ethernet0_rgmii_mc1pins_b>;
- phy-mode = "rgmii-id";
- phy-handle = <&ethphy>;
- status = "okay";
-
- mdio0 {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy: ethernet-phy@3 { /* KSZ9031RN */
- reg = <3>;
- reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
- interrupt-parent = <&gpioa>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
- rxc-skew-ps = <1860>;
- txc-skew-ps = <1860>;
- reset-assert-us = <10000>;
- reset-deassert-us = <300>;
- micrel,force-master;
- };
- };
-};
-
-&gpioz {
- gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
- "HWID4", "HWID5";
-};
-
-&gpu {
- status = "okay";
-};
-
-&i2c5 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_mc1pins_b>;
- clock-frequency = <400000>;
- status = "okay";
-
- touchscreen@38 {
- compatible = "edt,edt-ft5x06";
- interrupt-parent = <&gpiod>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
- vcc-supply = <&reg_3v3>;
- reg = <0x38>;
- reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
- touchscreen-size-x = <1792>;
- touchscreen-size-y = <1024>;
- wakeup-source;
- };
-};
-
-&ltdc {
- pinctrl-names = "default";
- pinctrl-0 = <&ltdc_mc1pins_c>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
-};
-
-&pmic {
- regulators {
- buck4-supply = <&reg_5v2>; /* VIN */
- ldo2-supply = <&reg_5v2>; /* PMIC_LDO25IN */
- ldo5-supply = <&reg_5v2>; /* PMIC_LDO25IN */
- boost-supply = <&reg_5v2>; /* PMIC_BSTIN */
- pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */
- };
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- bus-width = <4>;
- cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
- disable-wp;
- no-1-8-v;
- st,neg-edge;
- vmmc-supply = <&reg_3v3>;
- status = "okay";
-};
-
-&sdmmc1_b4_pins_a {
- /*
- * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
- * work, thus enable internal pull-ups.
- */
- pins1 {
- /delete-property/ bias-disable;
- bias-pull-up;
- };
- pins2 {
- /delete-property/ bias-disable;
- bias-pull-up;
- };
-};
-
-&sdmmc2 {
- pinctrl-names = "default", "opendrain";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>;
- pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>;
- bus-width = <8>;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- st,neg-edge;
- vmmc-supply = <&reg_3v3>;
- status = "okay";
-};
-
-&timers3 {
- status = "okay";
-
- backlight_pwm: pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3_mc1pins_b>;
- status = "okay";
- };
-};
-
-&timers5 {
- status = "okay";
-
- leds_pwm: pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm5_mc1pins_b>;
- status = "okay";
- };
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&pinctrl {
- ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins3 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
- bias-disable;
- };
- };
-
- i2c5_mc1pins_b: mc1-i2c5-1 {
- pins {
- pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
- <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- ltdc_mc1pins_c: mc1-ltdc-2 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 1, AF9)>, /* LTDC_R6 */
- <STM32_PINMUX('B', 9, AF14)>, /* LTDC_B7 */
- <STM32_PINMUX('C', 0, AF14)>, /* LTDC_R5 */
- <STM32_PINMUX('D', 3, AF14)>, /* LTDC_G7 */
- <STM32_PINMUX('D', 6, AF14)>, /* LTDC_B2 */
- <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
- <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
- <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
- <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
- <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
- <STM32_PINMUX('H', 4, AF9)>, /* LTDC_G5 */
- <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
- <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
- <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
- <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
- <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
- <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
- <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
- <STM32_PINMUX('I', 6, AF14)>, /* LTDC_B6 */
- <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
- <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- pwm3_mc1pins_b: mc1-pwm3-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm5_mc1pins_b: mc1-pwm5-1 {
- pins {
- pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
- <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
- <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- };
-
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-16 16:34:37 +0000