summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/patches/tf-a-v2.3
diff options
context:
space:
mode:
Diffstat (limited to 'configs/platform-v7a/patches/tf-a-v2.3')
-rw-r--r--configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch414
-rw-r--r--configs/platform-v7a/patches/tf-a-v2.3/series1
2 files changed, 415 insertions, 0 deletions
diff --git a/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch b/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
new file mode 100644
index 0000000..abfbd7e
--- /dev/null
+++ b/configs/platform-v7a/patches/tf-a-v2.3/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
@@ -0,0 +1,414 @@
+From 8713c33c448dddcaee33d71fe3d5d2ed40c49283 Mon Sep 17 00:00:00 2001
+From: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Date: Wed, 29 Jan 2020 16:04:18 +0100
+Subject: [PATCH] fdts: stm32mp1: add support for Linux Automation MC-1
+ board
+
+The Linux Automation MC-1 is a SBC built around the Octavo Systems
+OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and
+PMIC. The board has eMMC and a SD slot for storage.
+
+Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
+---
+ fdts/stm32mp157c-lxa-mc1.dts | 110 ++++++++++++++
+ fdts/stm32mp15xx-osd32.dtsi | 271 +++++++++++++++++++++++++++++++++++
+ 2 files changed, 381 insertions(+)
+ create mode 100644 fdts/stm32mp157c-lxa-mc1.dts
+ create mode 100644 fdts/stm32mp15xx-osd32.dtsi
+
+diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts
+new file mode 100644
+index 000000000000..e75e7b5ba28b
+--- /dev/null
++++ b/fdts/stm32mp157c-lxa-mc1.dts
+@@ -0,0 +1,110 @@
++/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
++/*
++ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
++ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
++ */
++
++/dts-v1/;
++
++#include "stm32mp157c.dtsi"
++#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
++#include "stm32mp157c-security.dtsi"
++#include "stm32mp15xx-osd32.dtsi"
++
++/ {
++ model = "Linux Automation MC-1 board";
++ compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp157c-osd32", "st,stm32mp157";
++
++ aliases {
++ mmc0 = &sdmmc1;
++ mmc1 = &sdmmc2;
++ serial0 = &uart4;
++ };
++
++ chosen {
++ stdout-path = &uart4;
++ };
++
++ led-act {
++ compatible = "gpio-leds";
++
++ green {
++ label = "mc1:green:act";
++ gpios = <&gpioa 13 1>;
++ linux,default-trigger = "heartbeat";
++ default-state = "off";
++ };
++ };
++
++ reg_3v3: regulator_3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "3V3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&v3v3>;
++ };
++};
++
++&sdmmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc1_b4_pu_pins_a>;
++ cd-gpios = <&gpioh 3 1>;
++ st,neg-edge;
++ bus-width = <4>;
++ vmmc-supply = <&reg_3v3>;
++ no-1-8-v;
++ status = "okay";
++};
++
++&sdmmc2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
++ non-removable;
++ no-sd;
++ no-sdio;
++ st,neg-edge;
++ bus-width = <8>;
++ vmmc-supply = <&reg_3v3>;
++ no-1-8-v;
++ mmc-ddr-3_3v;
++ status = "okay";
++};
++
++&uart4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart4_pins_a>;
++ status = "okay";
++};
++
++&pinctrl {
++ sdmmc1_b4_pu_pins_a: sdmmc1-pu-b4-0 {
++ pins1 {
++ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
++ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
++ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
++ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
++ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
++ slew-rate = <1>;
++ drive-push-pull;
++ bias-pull-up;
++ };
++ pins2 {
++ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
++ slew-rate = <2>;
++ drive-push-pull;
++ bias-pull-up;
++ };
++ };
++
++ sdmmc2_d47_pins_b: sdmmc2-d47-1 {
++ pins {
++ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* eMMC_D4 */
++ <STM32_PINMUX('A', 9, AF10)>, /* eMMC_D5 */
++ <STM32_PINMUX('C', 6, AF10)>, /* eMMC_D6 */
++ <STM32_PINMUX('C', 7, AF10)>; /* eMMC_D7 */
++ slew-rate = <1>;
++ drive-push-pull;
++ bias-disable;
++ };
++ };
++};
+diff --git a/fdts/stm32mp15xx-osd32.dtsi b/fdts/stm32mp15xx-osd32.dtsi
+new file mode 100644
+index 000000000000..453f18c30873
+--- /dev/null
++++ b/fdts/stm32mp15xx-osd32.dtsi
+@@ -0,0 +1,271 @@
++/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
++/*
++ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
++ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
++ */
++
++#include "stm32mp157cac-pinctrl.dtsi"
++
++&i2c4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c4_pins_a>;
++ i2c-scl-rising-time-ns = <185>;
++ i2c-scl-falling-time-ns = <20>;
++ status = "okay";
++
++ /* spare dmas for other usage */
++ /delete-property/ dmas;
++ /delete-property/ dma-names;
++
++ pmic: stpmic@33 {
++ compatible = "st,stpmic1";
++ reg = <0x33>;
++ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++
++ regulators {
++ compatible = "st,stpmic1-regulators";
++
++ ldo1-supply = <&v3v3>;
++ ldo3-supply = <&vdd_ddr>;
++ ldo6-supply = <&v3v3>;
++ pwr_sw1-supply = <&bst_out>;
++ pwr_sw2-supply = <&bst_out>;
++
++ vddcore: buck1 {
++ regulator-name = "vddcore";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-always-on;
++ regulator-initial-mode = <0>;
++ regulator-over-current-protection;
++ };
++
++ vdd_ddr: buck2 {
++ regulator-name = "vdd_ddr";
++ regulator-min-microvolt = <1350000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-always-on;
++ regulator-initial-mode = <0>;
++ regulator-over-current-protection;
++ };
++
++ vdd: buck3 {
++ regulator-name = "vdd";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ st,mask-reset;
++ regulator-initial-mode = <0>;
++ regulator-over-current-protection;
++ };
++
++ v3v3: buck4 {
++ regulator-name = "v3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ regulator-over-current-protection;
++ regulator-initial-mode = <0>;
++ };
++
++ v1v8_audio: ldo1 {
++ regulator-name = "v1v8_audio";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-always-on;
++
++ };
++
++ v3v3_hdmi: ldo2 {
++ regulator-name = "v3v3_hdmi";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++
++ };
++
++ vtt_ddr: ldo3 {
++ regulator-name = "vtt_ddr";
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <750000>;
++ regulator-always-on;
++ regulator-over-current-protection;
++ };
++
++ vdd_usb: ldo4 {
++ regulator-name = "vdd_usb";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vdda: ldo5 {
++ regulator-name = "vdda";
++ regulator-min-microvolt = <2900000>;
++ regulator-max-microvolt = <2900000>;
++ regulator-boot-on;
++ };
++
++ v1v2_hdmi: ldo6 {
++ regulator-name = "v1v2_hdmi";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-always-on;
++
++ };
++
++ vref_ddr: vref_ddr {
++ regulator-name = "vref_ddr";
++ regulator-always-on;
++ regulator-over-current-protection;
++ };
++
++ bst_out: boost {
++ regulator-name = "bst_out";
++ };
++
++ vbus_otg: pwr_sw1 {
++ regulator-name = "vbus_otg";
++ regulator-active-discharge;
++ };
++
++ vbus_sw: pwr_sw2 {
++ regulator-name = "vbus_sw";
++ regulator-active-discharge;
++ };
++ };
++
++ pmic_watchdog: watchdog {
++ compatible = "st,stpmic1-wdt";
++ status = "disabled";
++ };
++ };
++
++ sip_eeprom: eeprom@50 {
++ compatible = "atmel,24c32";
++ reg = <0x50>;
++ };
++};
++
++&rng1 {
++ status = "okay";
++};
++
++/* ATF Specific */
++#include <dt-bindings/clock/stm32mp1-clksrc.h>
++
++/ {
++ aliases {
++ gpio0 = &gpioa;
++ gpio1 = &gpiob;
++ gpio2 = &gpioc;
++ gpio3 = &gpiod;
++ gpio4 = &gpioe;
++ gpio5 = &gpiof;
++ gpio6 = &gpiog;
++ gpio7 = &gpioh;
++ gpio8 = &gpioi;
++ gpio25 = &gpioz;
++ i2c3 = &i2c4;
++ };
++};
++
++/* CLOCK init */
++&rcc {
++ secure-status = "disabled";
++ st,clksrc = <
++ CLK_MPU_PLL1P
++ CLK_AXI_PLL2P
++ CLK_MCU_PLL3P
++ CLK_PLL12_HSE
++ CLK_PLL3_HSE
++ CLK_PLL4_HSE
++ CLK_RTC_LSE
++ CLK_MCO1_DISABLED
++ CLK_MCO2_DISABLED
++ >;
++
++ st,clkdiv = <
++ 1 /*MPU*/
++ 0 /*AXI*/
++ 0 /*MCU*/
++ 1 /*APB1*/
++ 1 /*APB2*/
++ 1 /*APB3*/
++ 1 /*APB4*/
++ 2 /*APB5*/
++ 23 /*RTC*/
++ 0 /*MCO1*/
++ 0 /*MCO2*/
++ >;
++
++ st,pkcs = <
++ CLK_CKPER_HSE
++ CLK_FMC_ACLK
++ CLK_QSPI_ACLK
++ CLK_ETH_DISABLED
++ CLK_SDMMC12_PLL4P
++ CLK_DSI_DSIPLL
++ CLK_STGEN_HSE
++ CLK_USBPHY_HSE
++ CLK_SPI2S1_PLL3Q
++ CLK_SPI2S23_PLL3Q
++ CLK_SPI45_HSI
++ CLK_SPI6_HSI
++ CLK_I2C46_HSI
++ CLK_SDMMC3_PLL4P
++ CLK_USBO_USBPHY
++ CLK_ADC_CKPER
++ CLK_CEC_LSE
++ CLK_I2C12_HSI
++ CLK_I2C35_HSI
++ CLK_UART1_HSI
++ CLK_UART24_HSI
++ CLK_UART35_HSI
++ CLK_UART6_HSI
++ CLK_UART78_HSI
++ CLK_SPDIF_PLL4P
++ CLK_FDCAN_PLL4R
++ CLK_SAI1_PLL3Q
++ CLK_SAI2_PLL3Q
++ CLK_SAI3_PLL3Q
++ CLK_SAI4_PLL3Q
++ CLK_RNG1_LSI
++ CLK_RNG2_LSI
++ CLK_LPTIM1_PCLK1
++ CLK_LPTIM23_PCLK3
++ CLK_LPTIM45_LSE
++ >;
++
++ /* VCO = 1300.0 MHz => P = 650 (CPU) */
++ pll1: st,pll@0 {
++ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
++ frac = < 0x800 >;
++ };
++
++ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
++ pll2: st,pll@1 {
++ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
++ frac = < 0x1400 >;
++ };
++
++ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
++ pll3: st,pll@2 {
++ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
++ frac = < 0x1a04 >;
++ };
++
++ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
++ pll4: st,pll@3 {
++ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
++ };
++};
++
++&bsec {
++ board_id: board_id@ec {
++ reg = <0xec 0x4>;
++ status = "okay";
++ secure-status = "okay";
++ };
++};
+--
+2.25.0
+
diff --git a/configs/platform-v7a/patches/tf-a-v2.3/series b/configs/platform-v7a/patches/tf-a-v2.3/series
new file mode 100644
index 0000000..2f7ede3
--- /dev/null
+++ b/configs/platform-v7a/patches/tf-a-v2.3/series
@@ -0,0 +1 @@
+0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch