diff options
Diffstat (limited to 'configs')
17 files changed, 124 insertions, 52 deletions
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config index 5c21445..50ae35d 100644 --- a/configs/platform-v7a/barebox-am335x-mlo.config +++ b/configs/platform-v7a/barebox-am335x-mlo.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_USE_COMPRESSED_DTB=y @@ -67,6 +67,7 @@ CONFIG_MACH_PHYTEC_SOM_AM335X=y # CONFIG_PHYTEC_SOM_AM335X_OF_AUTOENABLE is not set # end of OMAP Features +# CONFIG_ARCH_RK3568_OPTEE is not set # CONFIG_BOARD_ARM_GENERIC_DT is not set CONFIG_ARM_ASM_UNIFIED=y CONFIG_AEABI=y @@ -187,6 +188,7 @@ CONFIG_DEFAULT_LOGLEVEL=7 # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_OMAP_UART_PORT=1 # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -398,6 +400,12 @@ CONFIG_TI_SYSC=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config index 1fddc9a..0987801 100644 --- a/configs/platform-v7a/barebox-am335x.config +++ b/configs/platform-v7a/barebox-am335x.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -70,6 +70,7 @@ CONFIG_MACH_BEAGLEBONE=y # CONFIG_MACH_WAGO_PFC_AM35XX is not set # end of OMAP Features +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_BOARD_ARM_GENERIC_DT=y CONFIG_ARM_ASM_UNIFIED=y CONFIG_AEABI=y @@ -153,6 +154,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="barebox> " CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -210,6 +212,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -242,6 +245,7 @@ CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_OMAP_UART_PORT=1 # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -272,6 +276,7 @@ CONFIG_CMD_IMD=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_REGULATOR=y +# CONFIG_CMD_NVMEM is not set CONFIG_CMD_VERSION=y CONFIG_CMD_MMC=y # CONFIG_CMD_MMC_EXTCSD is not set @@ -622,6 +627,7 @@ CONFIG_USB_GADGET_AUTOSTART=y # CONFIG_USB_GADGET_DFU is not set CONFIG_USB_GADGET_SERIAL=y CONFIG_USB_GADGET_FASTBOOT=y +# CONFIG_USB_GADGET_MASS_STORAGE is not set CONFIG_USB_MUSB=y CONFIG_USB_MUSB_DSPS=y CONFIG_USB_MUSB_AM335X=y @@ -751,6 +757,7 @@ CONFIG_PINCTRL_SINGLE=y # end of Pin controllers CONFIG_NVMEM=y +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set # CONFIG_EEPROM_93XX46 is not set @@ -779,6 +786,12 @@ CONFIG_REGULATOR_FIXED=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set @@ -797,6 +810,7 @@ CONFIG_REGULATOR_FIXED=y # # end of NVME Support +# CONFIG_NVMEM_REBOOT_MODE is not set # CONFIG_POWER_RESET_SYSCON is not set # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set # CONFIG_POWER_RESET_GPIO is not set diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff index 2ede5d0..6946657 100644 --- a/configs/platform-v7a/barebox-am335x.config.diff +++ b/configs/platform-v7a/barebox-am335x.config.diff @@ -1,4 +1,4 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 # CONFIG_AM33XX_NET_BOOT is not set CONFIG_ARCH_AM33XX=y # CONFIG_ARCH_BCM283X is not set @@ -24,6 +24,7 @@ CONFIG_CMD_MIITOOL=y CONFIG_CMD_NAND=y # CONFIG_CMD_NANDTEST is not set # CONFIG_CMD_NAND_BITFLIP is not set +# CONFIG_CMD_NVMEM is not set # CONFIG_CMD_SMC is undefined # CONFIG_COMMON_CLK is undefined # CONFIG_COMMON_CLK_OF_PROVIDER is undefined @@ -81,6 +82,8 @@ CONFIG_NAND=y CONFIG_NAND_ECC_HW_SYNDROME=y CONFIG_NAND_OMAP_GPMC=y CONFIG_NVMEM=y +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set # CONFIG_OMAP_BUILD_IFT is not set # CONFIG_OMAP_BUILD_SPI is not set diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config index bf17a24..0bacf5c 100644 --- a/configs/platform-v7a/barebox-at91.config +++ b/configs/platform-v7a/barebox-at91.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -79,6 +79,7 @@ CONFIG_MACH_SAMA5D27_GIANTBOARD=y # AT91 Board Options # CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff +# CONFIG_ARCH_RK3568_OPTEE is not set # CONFIG_BOARD_ARM_GENERIC_DT is not set CONFIG_AEABI=y # CONFIG_ARM_BOARD_APPEND_ATAG is not set @@ -157,6 +158,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -212,6 +214,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -238,6 +241,7 @@ CONFIG_DEFAULT_LOGLEVEL=7 # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_AT91_UART_BASE=0xf8020000 # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -735,6 +739,12 @@ CONFIG_REGULATOR_FIXED=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff index 5f7671f..4838331 100644 --- a/configs/platform-v7a/barebox-at91.config.diff +++ b/configs/platform-v7a/barebox-at91.config.diff @@ -1,4 +1,4 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 CONFIG_ARCH_AT91=y # CONFIG_ARCH_BCM283X is not set CONFIG_ARCH_TEXT_BASE=0x23f00000 @@ -111,6 +111,7 @@ CONFIG_SPI_MEM=y # CONFIG_USB_GADGET_AUTOSTART is undefined # CONFIG_USB_GADGET_DFU is undefined # CONFIG_USB_GADGET_FASTBOOT is undefined +# CONFIG_USB_GADGET_MASS_STORAGE is undefined # CONFIG_USB_GADGET_SERIAL is undefined # CONFIG_USB_HOST is not set # CONFIG_USB_HUB_USB251XB is undefined diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config index 2c12ff1..9f5ce62 100644 --- a/configs/platform-v7a/barebox-mx6.config +++ b/configs/platform-v7a/barebox-mx6.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -136,6 +136,7 @@ CONFIG_IMX_IIM_FUSE_BLOW=y # CONFIG_HABV4 is not set # end of i.MX specific settings +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_BOARD_ARM_GENERIC_DT=y CONFIG_ARM_ASM_UNIFIED=y CONFIG_AEABI=y @@ -220,6 +221,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -280,6 +282,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_DFU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -312,6 +315,7 @@ CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_IMX_UART_PORT=1 # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -342,6 +346,7 @@ CONFIG_CMD_IMD=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_REGULATOR=y +# CONFIG_CMD_NVMEM is not set CONFIG_CMD_VERSION=y CONFIG_CMD_MMC=y CONFIG_CMD_MMC_EXTCSD=y @@ -718,6 +723,7 @@ CONFIG_USB_GADGET_AUTOSTART=y CONFIG_USB_GADGET_DFU=y CONFIG_USB_GADGET_SERIAL=y CONFIG_USB_GADGET_FASTBOOT=y +# CONFIG_USB_GADGET_MASS_STORAGE is not set # CONFIG_USB_MUSB is not set CONFIG_VIDEO=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -873,6 +879,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y # end of Pin controllers CONFIG_NVMEM=y +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_IMX_OCOTP=y # CONFIG_IMX_OCOTP_WRITE is not set @@ -913,6 +920,12 @@ CONFIG_HW_HAS_PCI=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + CONFIG_GENERIC_PHY=y CONFIG_USB_NOP_XCEIV=y # CONFIG_PHY_FSL_IMX8MQ_USB is not set @@ -934,6 +947,7 @@ CONFIG_USB_NOP_XCEIV=y # end of NVME Support # CONFIG_SYSCON_REBOOT_MODE is not set +# CONFIG_NVMEM_REBOOT_MODE is not set # CONFIG_POWER_RESET_SYSCON is not set # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set # CONFIG_POWER_RESET_GPIO is not set diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff index 6912106..109eb50 100644 --- a/configs/platform-v7a/barebox-mx6.config.diff +++ b/configs/platform-v7a/barebox-mx6.config.diff @@ -1,4 +1,4 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 # CONFIG_ARCH_BCM283X is not set CONFIG_ARCH_HAS_FEC_IMX=y CONFIG_ARCH_HAS_IMX_GPT=y @@ -28,6 +28,7 @@ CONFIG_CMD_MMC_EXTCSD=y CONFIG_CMD_NAND=y # CONFIG_CMD_NANDTEST is not set # CONFIG_CMD_NAND_BITFLIP is not set +# CONFIG_CMD_NVMEM is not set # CONFIG_CMD_SMC is undefined CONFIG_CMD_SPLASH=y CONFIG_CMD_UBI=y @@ -191,6 +192,8 @@ CONFIG_NAND_ECC_HW_SYNDROME=y CONFIG_NAND_IMX=y CONFIG_NAND_MXS=y CONFIG_NVMEM=y +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_PARTITION_DISK_EFI=y CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config index d28dc33..234a6cb 100644 --- a/configs/platform-v7a/barebox-rpi2.config +++ b/configs/platform-v7a/barebox-rpi2.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -60,6 +60,7 @@ CONFIG_MACH_RPI_CM3=y # end of select Broadcom BCM283X boards to be built CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_BOARD_ARM_GENERIC_DT=y CONFIG_ARM_ASM_UNIFIED=y CONFIG_AEABI=y @@ -142,6 +143,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="R-Pi> " CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -199,6 +201,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -223,6 +226,7 @@ CONFIG_COMPILE_LOGLEVEL=7 CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -253,6 +257,7 @@ CONFIG_CMD_IMD=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_REGULATOR=y +# CONFIG_CMD_NVMEM is not set CONFIG_CMD_VERSION=y CONFIG_CMD_MMC=y # CONFIG_CMD_MMC_EXTCSD is not set @@ -681,6 +686,7 @@ CONFIG_PINCTRL_BCM283X=y # end of Pin controllers CONFIG_NVMEM=y +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set # CONFIG_EEPROM_93XX46 is not set @@ -708,6 +714,12 @@ CONFIG_REGULATOR_BCM283X=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + CONFIG_GENERIC_PHY=y CONFIG_USB_NOP_XCEIV=y # CONFIG_PHY_FSL_IMX8MQ_USB is not set @@ -728,6 +740,7 @@ CONFIG_USB_NOP_XCEIV=y # # end of NVME Support +# CONFIG_NVMEM_REBOOT_MODE is not set # CONFIG_POWER_RESET_SYSCON is not set # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set # CONFIG_POWER_RESET_GPIO is not set diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff index 1b87ea2..61afae8 100644 --- a/configs/platform-v7a/barebox-rpi2.config.diff +++ b/configs/platform-v7a/barebox-rpi2.config.diff @@ -1,8 +1,9 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 CONFIG_ARM_ASM_UNIFIED=y CONFIG_BOOTM_INITRD=y # CONFIG_CMD_I2C is undefined CONFIG_CMD_MIITOOL=y +# CONFIG_CMD_NVMEM is not set # CONFIG_CMD_USBGADGET is undefined CONFIG_DRIVER_SERIAL_NS16550=y # CONFIG_EEPROM_93XX46 is not set @@ -42,6 +43,8 @@ CONFIG_MCI_SDHCI=y CONFIG_NET_NETCONSOLE=y # CONFIG_NET_NFS is not set CONFIG_NVMEM=y +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set # CONFIG_PBL_OPTEE is undefined # CONFIG_PHY_FSL_IMX8MQ_USB is not set @@ -58,6 +61,7 @@ CONFIG_USB_DWC2_HOST=y # CONFIG_USB_GADGET_AUTOSTART is undefined # CONFIG_USB_GADGET_DFU is undefined # CONFIG_USB_GADGET_FASTBOOT is undefined +# CONFIG_USB_GADGET_MASS_STORAGE is undefined # CONFIG_USB_GADGET_SERIAL is undefined # CONFIG_USB_HUB_USB251XB is undefined CONFIG_USB_NOP_XCEIV=y diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config index 6afc4fe..13babb3 100644 --- a/configs/platform-v7a/barebox-stm32mp.config +++ b/configs/platform-v7a/barebox-stm32mp.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -49,6 +49,7 @@ CONFIG_CPU_32v7=y # # CONFIG_BOOT_ENDIANNESS_SWITCH is not set CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_ARCH_NR_GPIO=416 CONFIG_ARCH_STM32MP157=y CONFIG_MACH_STM32MP15XX_DKX=y @@ -196,6 +197,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -220,6 +222,7 @@ CONFIG_COMPILE_LOGLEVEL=6 CONFIG_DEFAULT_LOGLEVEL=7 # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -250,6 +253,7 @@ CONFIG_CMD_IMD=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_REGULATOR=y +# CONFIG_CMD_NVMEM is not set CONFIG_CMD_VERSION=y CONFIG_CMD_MMC=y CONFIG_CMD_MMC_EXTCSD=y @@ -658,6 +662,7 @@ CONFIG_PINCTRL_STM32=y # end of Pin controllers CONFIG_NVMEM=y +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_STM32_BSEC=y @@ -691,6 +696,12 @@ CONFIG_RESET_STM32=y # # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set @@ -710,6 +721,7 @@ CONFIG_RESET_STM32=y # end of NVME Support # CONFIG_SYSCON_REBOOT_MODE is not set +# CONFIG_NVMEM_REBOOT_MODE is not set # CONFIG_POWER_RESET_SYSCON is not set # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set # CONFIG_POWER_RESET_GPIO is not set diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff index 4650a52..261c367 100644 --- a/configs/platform-v7a/barebox-stm32mp.config.diff +++ b/configs/platform-v7a/barebox-stm32mp.config.diff @@ -1,4 +1,4 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 # CONFIG_ARCH_BCM283X is not set CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_NR_GPIO=416 @@ -26,6 +26,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y CONFIG_CMD_MENU_MANAGEMENT=y CONFIG_CMD_MIITOOL=y CONFIG_CMD_MMC_EXTCSD=y +# CONFIG_CMD_NVMEM is not set CONFIG_CMD_OF_DIFF=y CONFIG_CMD_POWEROFF=y # CONFIG_CMD_SPI is undefined @@ -49,7 +50,6 @@ CONFIG_DRIVER_SERIAL_STM32=y # CONFIG_DRIVER_SPI_GPIO is undefined CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_AT25 is undefined -CONFIG_FIRMWARE=y # CONFIG_FIRMWARE_ALTERA_SERIAL is undefined # CONFIG_FS_JFFS2 is undefined # CONFIG_GPIO_74164 is undefined @@ -100,6 +100,8 @@ CONFIG_NET_NETCONSOLE=y # CONFIG_NET_USB_ASIX is undefined # CONFIG_NET_USB_SMSC95XX is undefined CONFIG_NVMEM=y +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_PARTITION_DISK_EFI=y # CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set @@ -140,6 +142,7 @@ CONFIG_THUMB2_BAREBOX=y # CONFIG_USB_GADGET_AUTOSTART is undefined # CONFIG_USB_GADGET_DFU is undefined # CONFIG_USB_GADGET_FASTBOOT is undefined +# CONFIG_USB_GADGET_MASS_STORAGE is undefined # CONFIG_USB_GADGET_SERIAL is undefined # CONFIG_USB_HOST is not set # CONFIG_USB_HUB_USB251XB is undefined diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config index 3742f9e..bedcda7 100644 --- a/configs/platform-v7a/barebox-vexpress.config +++ b/configs/platform-v7a/barebox-vexpress.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -49,6 +49,7 @@ CONFIG_CPU_32v7=y # CONFIG_BOOT_ENDIANNESS_SWITCH is not set CONFIG_ARCH_TEXT_BASE=0x0 CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_MACH_VEXPRESS=y # CONFIG_MACH_VIRT is not set CONFIG_BOARD_ARM_GENERIC_DT=y @@ -130,6 +131,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="vexpress: " CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -187,6 +189,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -212,6 +215,7 @@ CONFIG_COMPILE_LOGLEVEL=7 CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -576,6 +580,7 @@ CONFIG_USB_GADGET_AUTOSTART=y # CONFIG_USB_GADGET_DFU is not set CONFIG_USB_GADGET_SERIAL=y # CONFIG_USB_GADGET_FASTBOOT is not set +# CONFIG_USB_GADGET_MASS_STORAGE is not set # CONFIG_USB_MUSB is not set # CONFIG_VIDEO is not set # CONFIG_SOUND is not set @@ -700,6 +705,12 @@ CONFIG_REGULATOR=y # # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff index a6c1ce7..4ca912e 100644 --- a/configs/platform-v7a/barebox-vexpress.config.diff +++ b/configs/platform-v7a/barebox-vexpress.config.diff @@ -1,4 +1,4 @@ -16fa9fc0a362b865332f662c12ee79f6 +65719ca0e82fb5940a2621b62f242422 CONFIG_AMBA_SP804=y # CONFIG_ARCH_BCM283X is not set CONFIG_ARCH_VEXPRESS=y diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config index b0c3510..18e97f2 100644 --- a/configs/platform-v7a/barebox.config +++ b/configs/platform-v7a/barebox.config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Barebox/arm 2021.07.0 Configuration +# Barebox/arm 2021.08.0 Configuration # CONFIG_ARM=y CONFIG_ARM_LINUX=y @@ -60,6 +60,7 @@ CONFIG_MACH_RPI3=y # end of select Broadcom BCM283X boards to be built CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff +# CONFIG_ARCH_RK3568_OPTEE is not set CONFIG_BOARD_ARM_GENERIC_DT=y CONFIG_AEABI=y # CONFIG_THUMB2_BAREBOX is not set @@ -142,6 +143,7 @@ CONFIG_RELOCATABLE=y CONFIG_PROMPT="barebox>" CONFIG_BAUDRATE=115200 CONFIG_CBSIZE=1024 +CONFIG_FIRMWARE=y CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_SHELL_NONE is not set @@ -199,6 +201,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv" # CONFIG_BAREBOXENV_TARGET is not set # CONFIG_BAREBOXCRC32_TARGET is not set +CONFIG_HAS_SCHED=y CONFIG_POLLER=y CONFIG_BTHREAD=y CONFIG_STATE=y @@ -224,6 +227,7 @@ CONFIG_COMPILE_LOGLEVEL=7 CONFIG_DEFAULT_LOGLEVEL=6 # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_INITCALLS is not set +# CONFIG_DEBUG_PROBES is not set # CONFIG_PBL_BREAK is not set # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KASAN=y @@ -588,6 +592,7 @@ CONFIG_USB_GADGET_AUTOSTART=y # CONFIG_USB_GADGET_DFU is not set CONFIG_USB_GADGET_SERIAL=y # CONFIG_USB_GADGET_FASTBOOT is not set +# CONFIG_USB_GADGET_MASS_STORAGE is not set # CONFIG_USB_MUSB is not set # CONFIG_VIDEO is not set # CONFIG_SOUND is not set @@ -743,6 +748,12 @@ CONFIG_REGULATOR_BCM283X=y # CONFIG_FIRMWARE_ALTERA_SERIAL is not set # end of Firmware Drivers +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set +# end of FPGA Configuration Support + # CONFIG_GENERIC_PHY is not set # CONFIG_CRYPTO_HW is not set diff --git a/configs/platform-v7a/patches/barebox-2021.07.0/0001-ARM-at91-fix-building-samad2-images-without-sama5d3.patch b/configs/platform-v7a/patches/barebox-2021.07.0/0001-ARM-at91-fix-building-samad2-images-without-sama5d3.patch deleted file mode 100644 index a755c6c..0000000 --- a/configs/platform-v7a/patches/barebox-2021.07.0/0001-ARM-at91-fix-building-samad2-images-without-sama5d3.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Ahmad Fatoum <a.fatoum@pengutronix.de> -Date: Thu, 22 Jul 2021 13:52:58 +0200 -Subject: [PATCH] ARM: at91: fix building samad2 images without sama5d3 - -Addition of first stage support for SAMA5D3 added a dependency -between sama5d2 and sama5d3 first stages: They both needed to be -enabled to generate images for either. Break up this dependency -to fix build failures for configs that e.g. only build one SoC. - -Fixes: e30fb46597d3 ("ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper") -Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> ---- - arch/arm/mach-at91/Kconfig | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - -diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig -index 28a82c1a9351..290178706a40 100644 ---- a/arch/arm/mach-at91/Kconfig -+++ b/arch/arm/mach-at91/Kconfig -@@ -44,10 +44,7 @@ config HAVE_AT91_DDRAMC - bool - - config AT91_MCI_PBL -- bool -- depends on MCI_ATMEL_PBL -- depends on MCI_ATMEL_SDHCI_PBL -- default y -+ def_bool MCI_ATMEL_PBL || MCI_ATMEL_SDHCI_PBL - - # Select if board uses the common at91sam926x_board_init - config AT91SAM926X_BOARD_INIT diff --git a/configs/platform-v7a/patches/barebox-2021.07.0/series b/configs/platform-v7a/patches/barebox-2021.07.0/series deleted file mode 100644 index 8408441..0000000 --- a/configs/platform-v7a/patches/barebox-2021.07.0/series +++ /dev/null @@ -1,4 +0,0 @@ -# generated by git-ptx-patches -#tag:base --start-number 1 -0001-ARM-at91-fix-building-samad2-images-without-sama5d3.patch -# 3632b7775588d8916f5d8c68ef5db538 - git-ptx-patches magic diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig index f664f47..0eec636 100644 --- a/configs/platform-v7a/platformconfig +++ b/configs/platform-v7a/platformconfig @@ -176,8 +176,8 @@ PTXCONF_CONSOLE_SPEED="115200" # PTXCONF_AT91BOOTSTRAP2 is not set PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm" PTXCONF_BAREBOX_COMMON=y -PTXCONF_BAREBOX_COMMON_VERSION="2021.07.0" -PTXCONF_BAREBOX_COMMON_MD5="df3651a395e1420c2818dd464c63069d" +PTXCONF_BAREBOX_COMMON_VERSION="2021.08.0" +PTXCONF_BAREBOX_COMMON_MD5="eddcd7bc7e9d3836f0d68e3abce210ec" PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y PTXCONF_BAREBOX_AM335X_MLO=y PTXCONF_BAREBOX_AM335X=y |