diff options
Diffstat (limited to 'doc/hardware_v7a_raspi3.rst')
-rw-r--r-- | doc/hardware_v7a_raspi3.rst | 24 |
1 files changed, 23 insertions, 1 deletions
diff --git a/doc/hardware_v7a_raspi3.rst b/doc/hardware_v7a_raspi3.rst index d874233..a4069c2 100644 --- a/doc/hardware_v7a_raspi3.rst +++ b/doc/hardware_v7a_raspi3.rst @@ -7,9 +7,31 @@ Use the image ``platform-v7a/images/rpi3.hdimg`` and copy it onto your MicroSD-C Serial Console -------------- -The serial boot console is available at J8 (the GPIO header) with 115200 Baud and 8N1 on the following Pins: +The serial boot console is available at J8 (the GPIO header) with 115200 Baud and 8N1 on the following pins: * J8.6: GND * J8.8: Tx * J8.10: Rx +Raspberry Pi Compute Module 3+ +============================== + +Boot Media +---------- +Use the image ``platform-v7a/images/rpicm3.hdimg`` and copy it onto your MicroSD-Card. + +If you have a hardware with eMMC the uSD slot is not functional, in this case +you have to use `usbboot <https://github.com/raspberrypi/usbboot`_ to switch +the hardware into USB mass storage mode. See their documentation and +`"Flashing the Compute Module eMMC" at raspberrypi.org +<https://www.raspberrypi.org/documentation/hardware/computemodule/cm-emmc-flashing.md>` +for details. + +Serial Console +-------------- +The serial boot console is available at the GPIOx BANK0 header (J5) on the following pins with the Compute Module IO Board V3.0: + +* GPIO14: TX +* GPIO15: RX + +For GND there are several labeled pins available on J5. |