| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
| |
Make it clear that this platform is really only used for the legacy
ARMv6-based RPi 1 boards, so that there is no confusion when trying to
use it for RPi 2 or later, even for people who don't read the
documentation.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
|
|
|
|
|
| |
This firmware was taken from the official firmware repository at:
https://github.com/raspberrypi/firmware/commit/3bba1909a004fb34d5b01db2c319976f33d8eb1d
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This config enables the early debug for the Raspberry-Pi Firmware
bootloader.
This makes sure that the UART is available to barebox even if the
used board has additional hardware (like Bluetooth) connected to the
UART.
This command only works if the firmware is loaded from the SD-Card.
See for more information:
https://github.com/raspberrypi/firmware/wiki/USB-MSD-and-network-boot-debugging
Signed-off-by: Chris Fiege <chris@tinyhost.de>
|
|
|
|
|
|
|
|
| |
This firmware was taken from the official firmware repository at:
https://github.com/raspberrypi/firmware
from 86e3ccc14e43618f82a13e639002199de29a16b1
Signed-off-by: Chris Fiege <chris@tinyhost.de>
|
|
|
|
|
|
| |
Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
|
|
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|