From 039a636d541f03769133740fbb9b400ea58cf7e9 Mon Sep 17 00:00:00 2001
From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Date: Fri, 7 Dec 2018 15:35:28 +0100
Subject: platform-v7a: barebox bump v2018.05.0 → v2018.12.0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Bump barebox from v2018.05.0 to v2018.12.0.
This barebox release officially supports RPI3, this will be enabled in
a later commit.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
 configs/platform-v7a/barebox-mx6.config | 38 +++++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)

(limited to 'configs/platform-v7a/barebox-mx6.config')

diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 980b97b..b792744 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.12.0-20181207-1 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -94,13 +94,18 @@ CONFIG_MACH_UDOO_NEO=y
 # CONFIG_MACH_VARISCITE_MX6 is not set
 # CONFIG_MACH_GW_VENTANA is not set
 # CONFIG_MACH_CM_FX6 is not set
+# CONFIG_MACH_ADVANTECH_ROM_742X is not set
 # CONFIG_MACH_WARP7 is not set
 # CONFIG_MACH_VF610_TWR is not set
+# CONFIG_MACH_ZII_RDU1 is not set
 # CONFIG_MACH_ZII_RDU2 is not set
 # CONFIG_MACH_ZII_VF610_DEV is not set
+# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
 # CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
 # CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
 # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
+# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
+# CONFIG_MACH_GRINN_LITEBOARD is not set
 
 #
 # Board specific settings
@@ -111,10 +116,7 @@ CONFIG_MACH_UDOO_NEO=y
 #
 CONFIG_IMX_IIM=y
 CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_IMX_OCOTP=y
-# CONFIG_IMX_OCOTP_WRITE is not set
 # CONFIG_HABV4 is not set
-# CONFIG_ARCH_IMX_USBLOADER is not set
 CONFIG_ARM_ASM_UNIFIED=y
 CONFIG_AEABI=y
 CONFIG_THUMB2_BAREBOX=y
@@ -147,6 +149,7 @@ CONFIG_MENUTREE=y
 CONFIG_FILE_LIST=y
 CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB=y
 CONFIG_UBIFORMAT=y
+CONFIG_USBGADGET_START=y
 CONFIG_BOOT=y
 
 #
@@ -464,6 +467,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
 #
 # serial drivers
 #
+# CONFIG_SERIAL_DEV_BUS is not set
 # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
 CONFIG_DRIVER_SERIAL_IMX=y
 # CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -493,11 +497,13 @@ CONFIG_DRIVER_NET_FEC_IMX=y
 #
 # CONFIG_AR8327N_PHY is not set
 CONFIG_AT803X_PHY=y
+# CONFIG_DAVICOM_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_MARVELL_PHY is not set
 CONFIG_MICREL_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
 
 #
 # MII bus device drivers
@@ -651,7 +657,9 @@ CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_ARCH_HAS_IMX_GPT=y
 CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
+CONFIG_CLOCKSOURCE_IMX_GPT=y
 
 #
 # MFD
@@ -681,6 +689,7 @@ CONFIG_LED_GPIO_OF=y
 # CONFIG_LED_GPIO_RGB is not set
 # CONFIG_LED_GPIO_BICOLOR is not set
 CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
 
 #
 # EEPROM support
@@ -762,6 +771,15 @@ CONFIG_USB_NOP_XCEIV=y
 # Filesystem support
 #
 CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
 CONFIG_FS_AUTOMOUNT=y
 # CONFIG_FS_CRAMFS is not set
 CONFIG_FS_EXT4=y
@@ -823,6 +841,7 @@ CONFIG_STMP_DEVICE=y
 # CONFIG_RATP is not set
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC8 is not set
 
 #
 # Library gui routines
@@ -854,3 +873,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
 # CONFIG_DIGEST_SHA1_ARM is not set
 # CONFIG_DIGEST_SHA256_ARM is not set
 CONFIG_CRYPTO_KEYSTORE=y
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+# CONFIG_ARCH_IMX_USBLOADER is not set
-- 
cgit v1.2.3