diff options
| author | Andrey Smirnov <andrew.smirnov@gmail.com> | 2020-03-31 11:47:17 -0700 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2020-04-03 08:21:28 +0200 |
| commit | fa70e47b3bb07158fc6cfcae57405115fe922977 (patch) | |
| tree | f0482d5409d6477bb12a7f111fa6d4858827a76f | |
| parent | eb76dd3dac9c84822e893e1f273f3a222f467369 (diff) | |
| download | barebox-fa70e47b3bb07158fc6cfcae57405115fe922977.tar.gz barebox-fa70e47b3bb07158fc6cfcae57405115fe922977.tar.xz | |
ARM: imx8mq: Drop redundant DT nodes
Drop all of the aliases and themrmal-zone nodes in imx8mq.dtsi since
those nodes are now present in upstream DT file.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| -rw-r--r-- | arch/arm/dts/imx8mq.dtsi | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi index 936e486105..44a86c715a 100644 --- a/arch/arm/dts/imx8mq.dtsi +++ b/arch/arm/dts/imx8mq.dtsi @@ -4,108 +4,11 @@ * Copyright (C) 2017 Pengutronix, Lucas Stach <kernel@pengutronix.de> */ -#include <dt-bindings/reset/imx8mq-reset.h> -#include <dt-bindings/thermal/thermal.h> - / { aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; mmc0 = &usdhc1; mmc1 = &usdhc2; }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <2000>; - thermal-sensors = <&tmu>; - - trips { - cpu_alert0: trip0 { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit0: trip1 { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - soc@0 { - bus@30000000 { - tmu: tmu@30260000 { - compatible = "fsl,imx8mq-tmu"; - reg = <0x30260000 0x10000>; - interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - little-endian; - fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; - fsl,tmu-calibration = <0x00000000 0x00000023 - 0x00000001 0x00000029 - 0x00000002 0x0000002f - 0x00000003 0x00000035 - 0x00000004 0x0000003d - 0x00000005 0x00000043 - 0x00000006 0x0000004b - 0x00000007 0x00000051 - 0x00000008 0x00000057 - 0x00000009 0x0000005f - 0x0000000a 0x00000067 - 0x0000000b 0x0000006f - - 0x00010000 0x0000001b - 0x00010001 0x00000023 - 0x00010002 0x0000002b - 0x00010003 0x00000033 - 0x00010004 0x0000003b - 0x00010005 0x00000043 - 0x00010006 0x0000004b - 0x00010007 0x00000055 - 0x00010008 0x0000005d - 0x00010009 0x00000067 - 0x0001000a 0x00000070 - - 0x00020000 0x00000017 - 0x00020001 0x00000023 - 0x00020002 0x0000002d - 0x00020003 0x00000037 - 0x00020004 0x00000041 - 0x00020005 0x0000004b - 0x00020006 0x00000057 - 0x00020007 0x00000063 - 0x00020008 0x0000006f - - 0x00030000 0x00000015 - 0x00030001 0x00000021 - 0x00030002 0x0000002d - 0x00030003 0x00000039 - 0x00030004 0x00000045 - 0x00030005 0x00000053 - 0x00030006 0x0000005f - 0x00030007 0x00000071>; - #thermal-sensor-cells = <0>; - }; - }; - }; -}; - -&A53_0 { - #cooling-cells = <2>; }; &clk { |