dts: update to v4.9-rc3

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

16 files changed, 80 insertions, 65 deletions

diff --git a/dts/Bindings/clock/uniphier-clock.txt b/dts/Bindings/clock/uniphier-clock.txt
index c7179d3b5c..812163060f 100644
--- a/dts/Bindings/clock/uniphier-clock.txt
+++ b/dts/Bindings/clock/uniphier-clock.txt
@@ -24,7 +24,7 @@ Example:
 		reg = <0x61840000 0x4000>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-clock";
+			compatible = "socionext,uniphier-ld11-clock";
 			#clock-cells = <1>;
 		};
 
@@ -43,8 +43,8 @@ Provided clocks:
 21: USB3 ch1 PHY1
 
 
-Media I/O (MIO) clock
----------------------
+Media I/O (MIO) clock, SD clock
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
@@ -52,10 +52,10 @@ Required properties:
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
 - #clock-cells: should be 1.
 
 Example:
@@ -66,7 +66,7 @@ Example:
 		reg = <0x59810000 0x800>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-mio-clock";
+			compatible = "socionext,uniphier-ld11-mio-clock";
 			#clock-cells = <1>;
 		};
 
@@ -112,7 +112,7 @@ Example:
 		reg = <0x59820000 0x200>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-peri-clock";
+			compatible = "socionext,uniphier-ld11-peri-clock";
 			#clock-cells = <1>;
 		};
 
diff --git a/dts/Bindings/reset/uniphier-reset.txt b/dts/Bindings/reset/uniphier-reset.txt
index e6bbfccd56..5020524cdd 100644
--- a/dts/Bindings/reset/uniphier-reset.txt
+++ b/dts/Bindings/reset/uniphier-reset.txt
@@ -6,25 +6,25 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
+		compatible = "socionext,uniphier-ld11-sysctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x61840000 0x4000>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-reset";
+			compatible = "socionext,uniphier-ld11-reset";
 			#reset-cells = <1>;
 		};
 
@@ -32,30 +32,30 @@ Example:
 	};
 
 
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld20-mioctrl",
+		compatible = "socionext,uniphier-ld11-mioctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59810000 0x800>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-mio-reset";
+			compatible = "socionext,uniphier-ld11-mio-reset";
 			#reset-cells = <1>;
 		};
 
@@ -68,24 +68,24 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld20-perictrl",
+		compatible = "socionext,uniphier-ld11-perictrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59820000 0x200>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-peri-reset";
+			compatible = "socionext,uniphier-ld11-peri-reset";
 			#reset-cells = <1>;
 		};
 
diff --git a/dts/Bindings/serial/cdns,uart.txt b/dts/Bindings/serial/cdns,uart.txt
index a3eb154c32..227bb770b0 100644
--- a/dts/Bindings/serial/cdns,uart.txt
+++ b/dts/Bindings/serial/cdns,uart.txt
@@ -1,7 +1,9 @@
 Binding for Cadence UART Controller
 
 Required properties:
-- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- compatible :
+  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
+  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
 - clocks: Must contain phandles to the UART clocks
diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt
index 1e4000d83a..8d27d1a603 100644
--- a/dts/Bindings/serial/renesas,sci-serial.txt
+++ b/dts/Bindings/serial/renesas,sci-serial.txt
@@ -9,6 +9,14 @@ Required properties:
     - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
     - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
     - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
+    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
+    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
+    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
+    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
+    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
+    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
index 455f2c310a..2c30a54790 100644
--- a/dts/Bindings/usb/dwc2.txt
+++ b/dts/Bindings/usb/dwc2.txt
@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
-  in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
 Example:
 
diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts
index b3df1c60d4..386eee6de2 100644
--- a/dts/src/arm/ste-snowball.dts
+++ b/dts/src/arm/ste-snowball.dts
@@ -239,14 +239,25 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi0_default_mode>;
 			pinctrl-1 = <&sdi0_sleep_mode>;
 
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -549,7 +560,7 @@
 					/* VMMCI level-shifter enable */
 					snowball_cfg3 {
 						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					snowball_cfg4 {
diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi
index 2c49c3614b..5357ea9c14 100644
--- a/dts/src/arm/uniphier-pro5.dtsi
+++ b/dts/src/arm/uniphier-pro5.dtsi
@@ -184,11 +184,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pro5-mio-clock";
+	compatible = "socionext,uniphier-pro5-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pro5-mio-reset";
+	compatible = "socionext,uniphier-pro5-sd-reset";
 };
 
 &peri_clk {
diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi
index 8789cd5189..950f07ba03 100644
--- a/dts/src/arm/uniphier-pxs2.dtsi
+++ b/dts/src/arm/uniphier-pxs2.dtsi
@@ -197,11 +197,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pxs2-mio-clock";
+	compatible = "socionext,uniphier-pxs2-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pxs2-mio-reset";
+	compatible = "socionext,uniphier-pxs2-sd-reset";
 };
 
 &peri_clk {
diff --git a/dts/src/arm/vf500.dtsi b/dts/src/arm/vf500.dtsi
index a3824e61bd..d7fdb2a7d9 100644
--- a/dts/src/arm/vf500.dtsi
+++ b/dts/src/arm/vf500.dtsi
@@ -70,7 +70,7 @@
 			global_timer: timer@40002200 {
 				compatible = "arm,cortex-a9-global-timer";
 				reg = <0x40002200 0x20>;
-				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
diff --git a/dts/src/arm64/broadcom/ns2-svk.dts b/dts/src/arm64/broadcom/ns2-svk.dts
index 2d7872a36b..b09f3bc5c6 100644
--- a/dts/src/arm64/broadcom/ns2-svk.dts
+++ b/dts/src/arm64/broadcom/ns2-svk.dts
@@ -164,6 +164,8 @@
 		nand-ecc-mode = "hw";
 		nand-ecc-strength = <8>;
 		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi
index 220ac7057d..97d331ec25 100644
--- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -123,6 +123,7 @@
 			     <1 14 0xf08>, /* Physical Non-Secure PPI */
 			     <1 11 0xf08>, /* Virtual PPI */
 			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
 	};
 
 	pmu {
diff --git a/dts/src/arm64/freescale/fsl-ls2080a.dtsi b/dts/src/arm64/freescale/fsl-ls2080a.dtsi
index 337da90bd7..7f0dc13b40 100644
--- a/dts/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls2080a.dtsi
@@ -195,6 +195,7 @@
 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
 			     <1 11 4>, /* Virtual PPI, active-low */
 			     <1 10 4>; /* Hypervisor PPI, active-low */
+		fsl,erratum-a008585;
 	};
 
 	pmu {
diff --git a/dts/src/arm64/marvell/armada-cp110-master.dtsi b/dts/src/arm64/marvell/armada-cp110-master.dtsi
index e5e3ed678b..602e2c2e9a 100644
--- a/dts/src/arm64/marvell/armada-cp110-master.dtsi
+++ b/dts/src/arm64/marvell/armada-cp110-master.dtsi
@@ -131,7 +131,7 @@
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
 				cell-index = <1>;
-				clocks = <&cpm_syscon0 0 3>;
+				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
 
diff --git a/dts/src/arm64/rockchip/rk3368-geekbox.dts b/dts/src/arm64/rockchip/rk3368-geekbox.dts
index 46cdddfcea..e5eeca2c24 100644
--- a/dts/src/arm64/rockchip/rk3368-geekbox.dts
+++ b/dts/src/arm64/rockchip/rk3368-geekbox.dts
@@ -116,7 +116,6 @@
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
 	disable-wp;
-	keep-power-in-suspend;
 	non-removable;
 	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
@@ -258,8 +257,6 @@
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 
diff --git a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts
index 5797933ef8..ea0a8eceef 100644
--- a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts
+++ b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts
@@ -152,8 +152,6 @@
 		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc_io>;
 	};
 
@@ -201,7 +199,6 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
-	keep-power-in-suspend;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	mmc-hs200-1_2v;
 	mmc-hs200-1_8v;
@@ -350,7 +347,6 @@
 	clock-freq-min-max = <400000 50000000>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	keep-power-in-suspend;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi
index 08fd7cf776..56a1b2e92c 100644
--- a/dts/src/arm64/socionext/uniphier-ld20.dtsi
+++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi
@@ -257,18 +257,18 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
-				compatible = "socionext,uniphier-ld20-mio-clock";
+			sd_clk: clock {
+				compatible = "socionext,uniphier-ld20-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
-				compatible = "socionext,uniphier-ld20-mio-reset";
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld20-sd-reset";
 				#reset-cells = <1>;
 			};
 		};