summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2017-02-13 09:26:03 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2017-02-13 09:26:03 +0100
commita06513273fc18c16b5081ddd80ce14b7de37cf6e (patch)
treed4f3eaf209d8710bd4fd2f17377dc1573b43406b
parenta9ba8a1d0d5c164b6962f7b80f08278302f54182 (diff)
parentcbf19c96efb552603541279a467ff577faaba995 (diff)
downloadbarebox-a06513273fc18c16b5081ddd80ce14b7de37cf6e.tar.gz
Merge branch 'for-next/dts'
-rw-r--r--dts/Bindings/i2c/i2c.txt8
-rw-r--r--dts/Bindings/interrupt-controller/snps,archs-idu-intc.txt3
-rw-r--r--dts/Bindings/mtd/tango-nand.txt6
-rw-r--r--dts/Bindings/net/mediatek-net.txt2
-rw-r--r--dts/Bindings/net/phy.txt5
-rw-r--r--dts/Bindings/net/ti,dp83867.txt6
-rw-r--r--dts/Bindings/spi/sh-msiof.txt19
-rw-r--r--dts/src/arm/am335x-icev2.dts1
-rw-r--r--dts/src/arm/bcm-nsp.dtsi2
-rw-r--r--dts/src/arm/da850-evm.dts1
-rw-r--r--dts/src/arm/dra7.dtsi1
-rw-r--r--dts/src/arm/dra72-evm-revc.dts2
-rw-r--r--dts/src/arm/imx6qdl-nitrogen6_max.dtsi4
-rw-r--r--dts/src/arm/imx6qdl-nitrogen6_som2.dtsi4
-rw-r--r--dts/src/arm/logicpd-som-lv-37xx-devkit.dts11
-rw-r--r--dts/src/arm/omap5.dtsi1
-rw-r--r--dts/src/arm/qcom-mdm9615.dtsi2
-rw-r--r--dts/src/arm/sun6i-a31-hummingbird.dts4
-rw-r--r--dts/src/arm/sun6i-a31.dtsi1
-rw-r--r--dts/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts2
-rw-r--r--dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts4
-rw-r--r--dts/src/arm64/amlogic/meson-gxbb.dtsi2
-rw-r--r--dts/src/arm64/exynos/exynos5433.dtsi2
-rw-r--r--dts/src/arm64/xilinx/zynqmp-ep108.dts2
-rw-r--r--dts/src/arm64/xilinx/zynqmp.dtsi6
25 files changed, 64 insertions, 37 deletions
diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt
index 5fa691e..cee9d50 100644
--- a/dts/Bindings/i2c/i2c.txt
+++ b/dts/Bindings/i2c/i2c.txt
@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
"irq" and "wakeup" names are recognized by I2C core, other names are
left to individual drivers.
+- host-notify
+ device uses SMBus host notify protocol instead of interrupt line.
+
- multi-master
states that there is another master active on this bus. The OS can use
this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
interrupt for the device. If "wakeup" interrupt name is not present in the
binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/dts/Bindings/interrupt-controller/snps,archs-idu-intc.txt b/dts/Bindings/interrupt-controller/snps,archs-idu-intc.txt
index 0dcb7c7..9446576 100644
--- a/dts/Bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/dts/Bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -15,6 +15,9 @@ Properties:
Second cell specifies the irq distribution mode to cores
0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+ The second cell in interrupts property is deprecated and may be ignored by
+ the kernel.
+
intc accessed via the special ARC AUX register interface, hence "reg" property
is not specified.
diff --git a/dts/Bindings/mtd/tango-nand.txt b/dts/Bindings/mtd/tango-nand.txt
index ad5a02f..cd1bf2a 100644
--- a/dts/Bindings/mtd/tango-nand.txt
+++ b/dts/Bindings/mtd/tango-nand.txt
@@ -5,7 +5,7 @@ Required properties:
- compatible: "sigma,smp8758-nand"
- reg: address/size of nfc_reg, nfc_mem, and pbus_reg
- dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
- clocks: reference to the system clock
- #address-cells: <1>
- #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
nandc: nand-controller@2c000 {
compatible = "sigma,smp8758-nand";
- reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+ reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
dmas = <&dma0 3>;
- dma-names = "nfc_sbox";
+ dma-names = "rxtx";
clocks = <&clkgen SYS_CLK>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/Bindings/net/mediatek-net.txt b/dts/Bindings/net/mediatek-net.txt
index c010faf..c7194e8 100644
--- a/dts/Bindings/net/mediatek-net.txt
+++ b/dts/Bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
* Ethernet controller node
Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
- reg: Address and length of the register set for the device
- interrupts: Should contain the three frame engines interrupts in numeric
order. These are fe_int0, fe_int1 and fe_int2.
diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt
index ff1bc4b..fb5056b 100644
--- a/dts/Bindings/net/phy.txt
+++ b/dts/Bindings/net/phy.txt
@@ -19,8 +19,9 @@ Optional Properties:
specifications. If neither of these are specified, the default is to
assume clause 22.
- If the phy's identifier is known then the list may contain an entry
- of the form: "ethernet-phy-idAAAA.BBBB" where
+ If the PHY reports an incorrect ID (or none at all) then the
+ "compatible" list may contain an entry with the correct PHY ID in the
+ form: "ethernet-phy-idAAAA.BBBB" where
AAAA - The value of the 16 bit Phy Identifier 1 register as
4 hex digits. This is the chip vendor OUI bits 3:18
BBBB - The value of the 16 bit Phy Identifier 2 register as
diff --git a/dts/Bindings/net/ti,dp83867.txt b/dts/Bindings/net/ti,dp83867.txt
index 85bf945..afe9630 100644
--- a/dts/Bindings/net/ti,dp83867.txt
+++ b/dts/Bindings/net/ti,dp83867.txt
@@ -3,9 +3,11 @@
Required properties:
- reg - The ID number for the phy, usually a small integer
- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values
diff --git a/dts/Bindings/spi/sh-msiof.txt b/dts/Bindings/spi/sh-msiof.txt
index da6614c..dc97506 100644
--- a/dts/Bindings/spi/sh-msiof.txt
+++ b/dts/Bindings/spi/sh-msiof.txt
@@ -1,17 +1,23 @@
Renesas MSIOF spi controller
Required properties:
-- compatible : "renesas,msiof-<soctype>" for SoCs,
- "renesas,sh-msiof" for SuperH, or
- "renesas,sh-mobile-msiof" for SH Mobile series.
- Examples with soctypes are:
- "renesas,msiof-r8a7790" (R-Car H2)
+- compatible : "renesas,msiof-r8a7790" (R-Car H2)
"renesas,msiof-r8a7791" (R-Car M2-W)
"renesas,msiof-r8a7792" (R-Car V2H)
"renesas,msiof-r8a7793" (R-Car M2-N)
"renesas,msiof-r8a7794" (R-Car E2)
"renesas,msiof-r8a7796" (R-Car M3-W)
"renesas,msiof-sh73a0" (SH-Mobile AG5)
+ "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+ "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+ "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+ "renesas,sh-msiof" (deprecated)
+
+ When compatible with the generic version, nodes
+ must list the SoC-specific version corresponding
+ to the platform first followed by the generic
+ version.
+
- reg : A list of offsets and lengths of the register sets for
the device.
If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
Example:
msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7791";
+ compatible = "renesas,msiof-r8a7791",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
diff --git a/dts/src/arm/am335x-icev2.dts b/dts/src/arm/am335x-icev2.dts
index 1463df3..8ed46f9 100644
--- a/dts/src/arm/am335x-icev2.dts
+++ b/dts/src/arm/am335x-icev2.dts
@@ -170,7 +170,6 @@
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
>;
};
diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi
index b6142bd..15f07f9 100644
--- a/dts/src/arm/bcm-nsp.dtsi
+++ b/dts/src/arm/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
axi {
compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x0011c40a>;
+ ranges = <0x00000000 0x18000000 0x0011c40c>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts
index 41de15f..78492a0 100644
--- a/dts/src/arm/da850-evm.dts
+++ b/dts/src/arm/da850-evm.dts
@@ -99,6 +99,7 @@
#size-cells = <1>;
compatible = "m25p64";
spi-max-frequency = <30000000>;
+ m25p,fast-read;
reg = <0>;
partition@0 {
label = "U-Boot-SPL";
diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi
index 1faf24a..5ba1616 100644
--- a/dts/src/arm/dra7.dtsi
+++ b/dts/src/arm/dra7.dtsi
@@ -1378,6 +1378,7 @@
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
+ ports-implemented = <0x1>;
};
rtc: rtc@48838000 {
diff --git a/dts/src/arm/dra72-evm-revc.dts b/dts/src/arm/dra72-evm-revc.dts
index c3d939c..3f808a4 100644
--- a/dts/src/arm/dra72-evm-revc.dts
+++ b/dts/src/arm/dra72-evm-revc.dts
@@ -75,6 +75,6 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,min-output-imepdance;
+ ti,min-output-impedance;
};
};
diff --git a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi
index 34887a1..47ba972 100644
--- a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi
+++ b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi
@@ -319,8 +319,6 @@
compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-nitrogen6_max-sgtl5000";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sgtl5000>;
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -402,6 +400,8 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
diff --git a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
index d80f21a..31d4cc6 100644
--- a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
+++ b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
@@ -250,8 +250,6 @@
compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-nitrogen6_som2-sgtl5000";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sgtl5000>;
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -320,6 +318,8 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
diff --git a/dts/src/arm/logicpd-som-lv-37xx-devkit.dts b/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
index da85984..38faa90 100644
--- a/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
+++ b/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
@@ -158,7 +158,7 @@
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+ pinctrl-0 = <&mmc1_pins>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
>;
};
@@ -242,12 +243,6 @@
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */
>;
};
-
- mmc1_cd: pinmux_mmc1_cd {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
- >;
- };
};
diff --git a/dts/src/arm/omap5.dtsi b/dts/src/arm/omap5.dtsi
index 7cd92ba..0844737 100644
--- a/dts/src/arm/omap5.dtsi
+++ b/dts/src/arm/omap5.dtsi
@@ -988,6 +988,7 @@
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
+ ports-implemented = <0x1>;
};
dss: dss@58000000 {
diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi
index 5ae4ec5..c852b69 100644
--- a/dts/src/arm/qcom-mdm9615.dtsi
+++ b/dts/src/arm/qcom-mdm9615.dtsi
@@ -357,7 +357,7 @@
};
amba {
- compatible = "arm,amba-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/dts/src/arm/sun6i-a31-hummingbird.dts b/dts/src/arm/sun6i-a31-hummingbird.dts
index 735914f..7cae328 100644
--- a/dts/src/arm/sun6i-a31-hummingbird.dts
+++ b/dts/src/arm/sun6i-a31-hummingbird.dts
@@ -140,6 +140,10 @@
cpu-supply = <&reg_dcdc3>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi
index 2b26175..e78faaf 100644
--- a/dts/src/arm/sun6i-a31.dtsi
+++ b/dts/src/arm/sun6i-a31.dtsi
@@ -234,6 +234,7 @@
de: display-engine {
compatible = "allwinner,sun6i-a31-display-engine";
allwinner,pipelines = <&fe0>;
+ status = "disabled";
};
soc@01c00000 {
diff --git a/dts/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts b/dts/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
index 5ea4915..10d3074 100644
--- a/dts/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/dts/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -56,7 +56,7 @@
};
&pio {
- mmc2_pins_nrst: mmc2@0 {
+ mmc2_pins_nrst: mmc2-rst-pin {
allwinner,pins = "PC16";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts
index 238fbea..5d28e1c 100644
--- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts
+++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts
@@ -137,6 +137,10 @@
};
};
+&scpi_clocks {
+ status = "disabled";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi
index 596240c..b353073 100644
--- a/dts/src/arm64/amlogic/meson-gxbb.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi
@@ -55,7 +55,7 @@
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
- clocks {
+ scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi
index 64226d5..135890c 100644
--- a/dts/src/arm64/exynos/exynos5433.dtsi
+++ b/dts/src/arm64/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
};
amba {
- compatible = "arm,amba-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/dts/src/arm64/xilinx/zynqmp-ep108.dts b/dts/src/arm64/xilinx/zynqmp-ep108.dts
index 3580896..ef1b9e5 100644
--- a/dts/src/arm64/xilinx/zynqmp-ep108.dts
+++ b/dts/src/arm64/xilinx/zynqmp-ep108.dts
@@ -27,7 +27,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi
index 68a9083..54dc283 100644
--- a/dts/src/arm64/xilinx/zynqmp.dtsi
+++ b/dts/src/arm64/xilinx/zynqmp.dtsi
@@ -72,7 +72,7 @@
<1 10 0xf08>;
};
- amba_apu {
+ amba_apu: amba_apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
@@ -175,7 +175,7 @@
};
i2c0: i2c@ff020000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@@ -185,7 +185,7 @@
};
i2c1: i2c@ff030000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;