Merge branch 'for-next/dts'

57 files changed, 231 insertions, 480 deletions

diff --git a/dts/Bindings/ata/sata_rcar.txt b/dts/Bindings/ata/sata_rcar.txt
index 0764f9ab63..e20eac7a30 100644
--- a/dts/Bindings/ata/sata_rcar.txt
+++ b/dts/Bindings/ata/sata_rcar.txt
@@ -1,14 +1,22 @@
 * Renesas R-Car SATA
 
 Required properties:
-- compatible		: should contain one of the following:
+- compatible		: should contain one or more of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			    ("renesas,rcar-sata" is deprecated)
 			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
 			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
 			  - "renesas,sata-r8a7791" for R-Car M2-W
 			  - "renesas,sata-r8a7793" for R-Car M2-N
 			  - "renesas,sata-r8a7795" for R-Car H3
+			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
+			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+			  - "renesas,rcar-sata" is deprecated
+
+			  When compatible with the generic version nodes
+			  must list the SoC-specific version corresponding
+			  to the platform first followed by the generic
+			  version.
+
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 - clocks		: must contain a reference to the functional clock.
@@ -16,7 +24,7 @@ Required properties:
 Example:
 
 sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791";
+	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
 	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
 	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/crypto/inside-secure-safexcel.txt b/dts/Bindings/crypto/inside-secure-safexcel.txt
index f69773f425..941bb6a6fb 100644
--- a/dts/Bindings/crypto/inside-secure-safexcel.txt
+++ b/dts/Bindings/crypto/inside-secure-safexcel.txt
@@ -8,7 +8,6 @@ Required properties:
 
 Optional properties:
 - clocks: Reference to the crypto engine clock.
-- dma-mask: The address mask limitation. Defaults to 64.
 
 Example:
 
@@ -24,6 +23,5 @@ Example:
 		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
 				  "eip";
 		clocks = <&cpm_syscon0 1 26>;
-		dma-mask = <0xff 0xffffffff>;
 		status = "disabled";
 	};
diff --git a/dts/Bindings/gpio/gpio-exar.txt b/dts/Bindings/gpio/gpio-exar.txt
new file mode 100644
index 0000000000..4540d61824
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-exar.txt
@@ -0,0 +1,5 @@
+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)
diff --git a/dts/Bindings/gpu/arm,mali-midgard.txt b/dts/Bindings/gpu/arm,mali-midgard.txt
index d3b6e1a471..5aa5926029 100644
--- a/dts/Bindings/gpu/arm,mali-midgard.txt
+++ b/dts/Bindings/gpu/arm,mali-midgard.txt
@@ -40,7 +40,7 @@ Optional properties:
 Example for a Mali-T760:
 
 gpu@ffa30000 {
-	compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 	reg = <0xffa30000 0x10000>;
 	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt
index aad9844278..a58c173b7a 100644
--- a/dts/Bindings/mmc/exynos-dw-mshc.txt
+++ b/dts/Bindings/mmc/exynos-dw-mshc.txt
@@ -78,7 +78,6 @@ Example:
 	};
 
 	dwmmc0@12200000 {
-		num-slots = <1>;
 		cap-mmc-highspeed;
 		cap-sd-highspeed;
 		broken-cd;
diff --git a/dts/Bindings/mmc/img-dw-mshc.txt b/dts/Bindings/mmc/img-dw-mshc.txt
index 85de99fcaa..c54e577eea 100644
--- a/dts/Bindings/mmc/img-dw-mshc.txt
+++ b/dts/Bindings/mmc/img-dw-mshc.txt
@@ -24,6 +24,5 @@ Example:
 
 		fifo-depth = <0x20>;
 		bus-width = <4>;
-		num-slots = <1>;
 		disable-wp;
 	};
diff --git a/dts/Bindings/mmc/k3-dw-mshc.txt b/dts/Bindings/mmc/k3-dw-mshc.txt
index 8af1afcb86..07242d1417 100644
--- a/dts/Bindings/mmc/k3-dw-mshc.txt
+++ b/dts/Bindings/mmc/k3-dw-mshc.txt
@@ -36,7 +36,6 @@ Example:
 
 	/* Board portion */
 	dwmmc0@fcd03000 {
-		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
@@ -52,7 +51,6 @@ Example:
 
 	dwmmc_1: dwmmc1@f723e000 {
 		compatible = "hisilicon,hi6220-dw-mshc";
-		num-slots = <0x1>;
 		bus-width = <0x4>;
 		disable-wp;
 		cap-sd-highspeed;
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt
index 9cb55ca574..ef3e5f1406 100644
--- a/dts/Bindings/mmc/synopsys-dw-mshc.txt
+++ b/dts/Bindings/mmc/synopsys-dw-mshc.txt
@@ -12,12 +12,12 @@ Required Properties:
 * #address-cells: should be 1.
 * #size-cells: should be 0.
 
-# Slots: The slot specific information are contained within child-nodes with
-  each child-node representing a supported slot. There should be atleast one
-  child node representing a card slot. The name of the child node representing
-  the slot is recommended to be slot@n where n is the unique number of the slot
-  connected to the controller. The following are optional properties which
-  can be included in the slot child node.
+# Slots (DEPRECATED): The slot specific information are contained within
+  child-nodes with each child-node representing a supported slot. There should
+  be atleast one child node representing a card slot. The name of the child node
+  representing the slot is recommended to be slot@n where n is the unique number
+  of the slot connected to the controller. The following are optional properties
+  which can be included in the slot child node.
 
 	* reg: specifies the physical slot number. The valid values of this
 	  property is 0 to (num-slots -1), where num-slots is the value
@@ -63,7 +63,7 @@ Optional properties:
   clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
 	  (Use the "max-frequency" instead of "clock-freq-min-max".)
 
-* num-slots: specifies the number of slots supported by the controller.
+* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
   The number of physical slots actually used could be equal or less than the
   value specified by num-slots. If this property is not specified, the value
   of num-slot property is assumed to be 1.
@@ -124,7 +124,6 @@ board specific portions as listed below.
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
-		num-slots = <1>;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
@@ -139,7 +138,6 @@ board specific portions as listed below.
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
-		num-slots = <1>;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
diff --git a/dts/Bindings/mmc/zx-dw-mshc.txt b/dts/Bindings/mmc/zx-dw-mshc.txt
index eaade0e5ad..906819a90c 100644
--- a/dts/Bindings/mmc/zx-dw-mshc.txt
+++ b/dts/Bindings/mmc/zx-dw-mshc.txt
@@ -25,7 +25,6 @@ Example:
 		clock-frequency = <50000000>;
 		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
 		clock-names = "biu", "ciu";
-		num-slots = <1>;
 		max-frequency = <50000000>;
 		cap-sdio-irq;
 		cap-sd-highspeed;
diff --git a/dts/Bindings/net/dwmac-sun8i.txt b/dts/Bindings/net/dwmac-sun8i.txt
deleted file mode 100644
index 725f3b1878..0000000000
--- a/dts/Bindings/net/dwmac-sun8i.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Allwinner sun8i GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
-- compatible: should be one of the following string:
-		"allwinner,sun8i-a83t-emac"
-		"allwinner,sun8i-h3-emac"
-		"allwinner,sun8i-v3s-emac"
-		"allwinner,sun50i-a64-emac"
-- reg: address and length of the register for the device.
-- interrupts: interrupt for the device
-- interrupt-names: should be "macirq"
-- clocks: A phandle to the reference clock for this device
-- clock-names: should be "stmmaceth"
-- resets: A phandle to the reset control for this device
-- reset-names: should be "stmmaceth"
-- phy-mode: See ethernet.txt
-- phy-handle: See ethernet.txt
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-- syscon: A phandle to the syscon of the SoC with one of the following
- compatible string:
-  - allwinner,sun8i-h3-system-controller
-  - allwinner,sun8i-v3s-system-controller
-  - allwinner,sun50i-a64-system-controller
-  - allwinner,sun8i-a83t-system-controller
-
-Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
-- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
-Both delay properties need to be a multiple of 100. They control the delay for
-external PHY.
-
-Optional properties for the following compatibles:
-  - "allwinner,sun8i-h3-emac",
-  - "allwinner,sun8i-v3s-emac":
-- allwinner,leds-active-low: EPHY LEDs are active low
-
-Required child node of emac:
-- mdio bus node: should be named mdio
-
-Required properties of the mdio node:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-The device node referenced by "phy" or "phy-handle" should be a child node
-of the mdio node. See phy.txt for the generic PHY bindings.
-
-Required properties of the phy node with the following compatibles:
-  - "allwinner,sun8i-h3-emac",
-  - "allwinner,sun8i-v3s-emac":
-- clocks: a phandle to the reference clock for the EPHY
-- resets: a phandle to the reset control for the EPHY
-
-Example:
-
-emac: ethernet@1c0b000 {
-	compatible = "allwinner,sun8i-h3-emac";
-	syscon = <&syscon>;
-	reg = <0x01c0b000 0x104>;
-	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq";
-	resets = <&ccu RST_BUS_EMAC>;
-	reset-names = "stmmaceth";
-	clocks = <&ccu CLK_BUS_EMAC>;
-	clock-names = "stmmaceth";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		int_mii_phy: ethernet-phy@1 {
-			reg = <1>;
-			clocks = <&ccu CLK_BUS_EPHY>;
-			resets = <&ccu RST_BUS_EPHY>;
-		};
-	};
-};
diff --git a/dts/src/arc/axc001.dtsi b/dts/src/arc/axc001.dtsi
index 53ce226f77..a380ffa1a4 100644
--- a/dts/src/arc/axc001.dtsi
+++ b/dts/src/arc/axc001.dtsi
@@ -15,15 +15,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -91,23 +91,21 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
 		interrupts = < 7 >;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x20000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x1b000000>;	/* (512 - 32) MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x1b000000>;	/* (512 - 32) MiB */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * We just move frame buffer area to the very end of
@@ -118,7 +116,7 @@
 		 */
 		frame_buffer: frame_buffer@9e000000 {
 			compatible = "shared-dma-pool";
-			reg = <0x9e000000 0x2000000>;
+			reg = <0x0 0x9e000000 0x0 0x2000000>;
 			no-map;
 		};
 	};
diff --git a/dts/src/arc/axc003.dtsi b/dts/src/arc/axc003.dtsi
index 14df46f141..cc9239ef8d 100644
--- a/dts/src/arc/axc003.dtsi
+++ b/dts/src/arc/axc003.dtsi
@@ -14,15 +14,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -94,30 +94,29 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
 		interrupts = < 24 >;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x40000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";
-			reg = <0xbe000000 0x2000000>;
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
 			no-map;
 		};
 	};
diff --git a/dts/src/arc/axc003_idu.dtsi b/dts/src/arc/axc003_idu.dtsi
index 695f9fa199..4ebb2170ab 100644
--- a/dts/src/arc/axc003_idu.dtsi
+++ b/dts/src/arc/axc003_idu.dtsi
@@ -14,15 +14,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -100,30 +100,29 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
 		interrupts = <0>;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x40000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";
-			reg = <0xbe000000 0x2000000>;
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
 			no-map;
 		};
 	};
diff --git a/dts/src/arc/axs10x_mb.dtsi b/dts/src/arc/axs10x_mb.dtsi
index 41cfb29b62..0ff7e07edc 100644
--- a/dts/src/arc/axs10x_mb.dtsi
+++ b/dts/src/arc/axs10x_mb.dtsi
@@ -13,7 +13,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00000000 0xe0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
 		interrupt-parent = <&mb_intc>;
 
 		i2sclk: i2sclk@100a0 {
diff --git a/dts/src/arm/armada-388-gp.dts b/dts/src/arm/armada-388-gp.dts
index 895fa6cfa1..563901e0ec 100644
--- a/dts/src/arm/armada-388-gp.dts
+++ b/dts/src/arm/armada-388-gp.dts
@@ -75,7 +75,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pca0_pins>;
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -87,7 +87,7 @@
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts
index a423e8ebfb..67e72bc72e 100644
--- a/dts/src/arm/da850-evm.dts
+++ b/dts/src/arm/da850-evm.dts
@@ -301,25 +301,4 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
 	status = "okay";
-
-	/* VPIF capture port */
-	port@0 {
-		vpif_input_ch0: endpoint@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-
-		vpif_input_ch1: endpoint@1 {
-			reg = <1>;
-			bus-width = <8>;
-			data-shift = <8>;
-		};
-	};
-
-	/* VPIF display port */
-	port@1 {
-		vpif_output_ch0: endpoint {
-			bus-width = <8>;
-		};
-	};
 };
diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts
index b837fec70e..a0f0916156 100644
--- a/dts/src/arm/da850-lcdk.dts
+++ b/dts/src/arm/da850-lcdk.dts
@@ -318,11 +318,4 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>;
 	status = "okay";
-
-	/* VPIF capture port */
-	port {
-		vpif_ch0: endpoint {
-			  bus-width = <8>;
-		};
-	};
 };
diff --git a/dts/src/arm/dm8168-evm.dts b/dts/src/arm/dm8168-evm.dts
index 1865976db5..c72a2132aa 100644
--- a/dts/src/arm/dm8168-evm.dts
+++ b/dts/src/arm/dm8168-evm.dts
@@ -68,6 +68,34 @@
 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 		>;
 	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
+			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
+			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
+			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
+			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
+			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
+			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
+			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
+			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
+			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
+			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
+			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
+			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
+			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
+			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
+			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
+			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
+			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
+			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
+			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
+			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
+			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
+			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -90,6 +118,8 @@
 
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -98,9 +128,11 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
@@ -164,7 +196,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */
diff --git a/dts/src/arm/dm816x.dtsi b/dts/src/arm/dm816x.dtsi
index 59cbf958fc..566b2a8c8b 100644
--- a/dts/src/arm/dm816x.dtsi
+++ b/dts/src/arm/dm816x.dtsi
@@ -145,7 +145,7 @@
 		};
 
 		elm: elm@48080000 {
-			compatible = "ti,816-elm";
+			compatible = "ti,am3352-elm";
 			ti,hwmods = "elm";
 			reg = <0x48080000 0x2000>;
 			interrupts = <4>;
diff --git a/dts/src/arm/dra71-evm.dts b/dts/src/arm/dra71-evm.dts
index 4d57a55473..a6298eb569 100644
--- a/dts/src/arm/dra71-evm.dts
+++ b/dts/src/arm/dra71-evm.dts
@@ -190,7 +190,7 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -198,7 +198,7 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 };
 
diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi
index 497a9470c8..5739389f5b 100644
--- a/dts/src/arm/exynos4.dtsi
+++ b/dts/src/arm/exynos4.dtsi
@@ -59,6 +59,9 @@
 		compatible = "samsung,exynos4210-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>;
+		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
 	i2s0: i2s@03830000 {
diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi
index f92f957412..a183b56283 100644
--- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi
+++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi
@@ -266,6 +266,7 @@
 
 &hdmicec {
 	status = "okay";
+	needs-hpd;
 };
 
 &hsi2c_4 {
diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi
index dfcc8e00cf..0ade3619f3 100644
--- a/dts/src/arm/imx25.dtsi
+++ b/dts/src/arm/imx25.dtsi
@@ -297,6 +297,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				status = "disabled";
+				ranges;
 
 				adc: adc@50030800 {
 					compatible = "fsl,imx25-gcq";
diff --git a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
index aeaa5a6e4f..a24e4f1911 100644
--- a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
+++ b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi
@@ -507,7 +507,7 @@
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			/* PCIe reset */
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x030b0
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x030b0
 			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
 		>;
 	};
@@ -668,7 +668,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts
index 54c4540228..0a24d1bf3c 100644
--- a/dts/src/arm/imx7d-sdb.dts
+++ b/dts/src/arm/imx7d-sdb.dts
@@ -557,6 +557,14 @@
 			>;
 		};
 
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+			>;
+		};
+
 		pinctrl_tsc2046_pendown: tsc2046_pendown {
 			fsl,pins = <
 				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
@@ -697,13 +705,5 @@
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x110b0
 		>;
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
-				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
-				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
-			>;
-		};
 	};
 };
diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi
index 2484f11761..858e1fed76 100644
--- a/dts/src/arm/rk3288.dtsi
+++ b/dts/src/arm/rk3288.dtsi
@@ -1126,8 +1126,8 @@
 		};
 	};
 
-	gpu: mali@ffa30000 {
-		compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	gpu: gpu@ffa30000 {
+		compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 		reg = <0xffa30000 0x10000>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi
index cc06da3943..60e69aeacb 100644
--- a/dts/src/arm/sama5d2.dtsi
+++ b/dts/src/arm/sama5d2.dtsi
@@ -303,7 +303,7 @@
 			#size-cells = <1>;
 			atmel,smc = <&hsmc>;
 			reg = <0x10000000 0x10000000
-			       0x40000000 0x30000000>;
+			       0x60000000 0x30000000>;
 			ranges = <0x0 0x0 0x10000000 0x10000000
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
@@ -1048,18 +1048,18 @@
 			};
 
 			hsmc: hsmc@f8014000 {
-				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
 				reg = <0xf8014000 0x1000>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
 				clocks = <&hsmc_clk>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges;
 
-				pmecc: ecc-engine@ffffc070 {
+				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
-					reg = <0xffffc070 0x490>,
-					      <0xffffc500 0x100>;
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x100>;
 				};
 			};
 
diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi
index 8923ba625b..19a8f4fcfa 100644
--- a/dts/src/arm/sun8i-a83t.dtsi
+++ b/dts/src/arm/sun8i-a83t.dtsi
@@ -44,7 +44,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -175,8 +177,8 @@
 			compatible = "allwinner,sun8i-a83t-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 21>;
-			resets = <&ccu 7>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
@@ -195,7 +197,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -247,8 +249,8 @@
 				     "allwinner,sun8i-h3-spdif";
 			reg = <0x01c21000 0x400>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 44>, <&ccu 76>;
-			resets = <&ccu 32>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
 			clock-names = "apb", "spdif";
 			dmas = <&dma 2>;
 			dma-names = "tx";
@@ -263,8 +265,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 53>;
-			resets = <&ccu 40>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts
index 6713d0f2b3..b1502df7b5 100644
--- a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts
+++ b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts
@@ -56,8 +56,6 @@
 
 	aliases {
 		serial0 = &uart0;
-		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-		ethernet0 = &emac;
 		ethernet1 = &xr819;
 	};
 
@@ -104,13 +102,6 @@
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>;
diff --git a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts
index d756ff8251..a337af1de3 100644
--- a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts
+++ b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts
@@ -52,7 +52,6 @@
 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -115,30 +114,12 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/dts/src/arm/sun8i-h3-nanopi-neo.dts b/dts/src/arm/sun8i-h3-nanopi-neo.dts
index 78f6c24952..8d2cc6e9a0 100644
--- a/dts/src/arm/sun8i-h3-nanopi-neo.dts
+++ b/dts/src/arm/sun8i-h3-nanopi-neo.dts
@@ -46,10 +46,3 @@
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
 };
-
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
diff --git a/dts/src/arm/sun8i-h3-orangepi-2.dts b/dts/src/arm/sun8i-h3-orangepi-2.dts
index 17cdeae19c..8ff71b1bb4 100644
--- a/dts/src/arm/sun8i-h3-orangepi-2.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-2.dts
@@ -54,7 +54,6 @@
 	aliases {
 		serial0 = &uart0;
 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-		ethernet0 = &emac;
 		ethernet1 = &rtl8189;
 	};
 
@@ -118,13 +117,6 @@
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/dts/src/arm/sun8i-h3-orangepi-one.dts b/dts/src/arm/sun8i-h3-orangepi-one.dts
index 6880268e8b..5fea430e0e 100644
--- a/dts/src/arm/sun8i-h3-orangepi-one.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-one.dts
@@ -52,7 +52,6 @@
 	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -98,13 +97,6 @@
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/dts/src/arm/sun8i-h3-orangepi-pc-plus.dts b/dts/src/arm/sun8i-h3-orangepi-pc-plus.dts
index a10281b455..8b93f5c781 100644
--- a/dts/src/arm/sun8i-h3-orangepi-pc-plus.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_a>;
diff --git a/dts/src/arm/sun8i-h3-orangepi-pc.dts b/dts/src/arm/sun8i-h3-orangepi-pc.dts
index 998b60f8d2..1a044b17d6 100644
--- a/dts/src/arm/sun8i-h3-orangepi-pc.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-pc.dts
@@ -52,7 +52,6 @@
 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -114,13 +113,6 @@
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/dts/src/arm/sun8i-h3-orangepi-plus.dts b/dts/src/arm/sun8i-h3-orangepi-plus.dts
index 331ed683ac..828ae7a526 100644
--- a/dts/src/arm/sun8i-h3-orangepi-plus.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-plus.dts
@@ -47,10 +47,6 @@
 	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
-	aliases {
-		ethernet0 = &emac;
-	};
-
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac-3v3";
@@ -78,24 +74,6 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
diff --git a/dts/src/arm/sun8i-h3-orangepi-plus2e.dts b/dts/src/arm/sun8i-h3-orangepi-plus2e.dts
index 80026f3caa..97920b12a9 100644
--- a/dts/src/arm/sun8i-h3-orangepi-plus2e.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-plus2e.dts
@@ -61,19 +61,3 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
 	};
 };
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi
index 6f21626080..11240a8313 100644
--- a/dts/src/arm/sunxi-h3-h5.dtsi
+++ b/dts/src/arm/sunxi-h3-h5.dtsi
@@ -391,32 +391,6 @@
 			clocks = <&osc24M>;
 		};
 
-		emac: ethernet@1c30000 {
-			compatible = "allwinner,sun8i-h3-emac";
-			syscon = <&syscon>;
-			reg = <0x01c30000 0x104>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			resets = <&ccu RST_BUS_EMAC>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu CLK_BUS_EMAC>;
-			clock-names = "stmmaceth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			mdio: mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				int_mii_phy: ethernet-phy@1 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <1>;
-					clocks = <&ccu CLK_BUS_EPHY>;
-					resets = <&ccu RST_BUS_EPHY>;
-				};
-			};
-		};
-
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
diff --git a/dts/src/arm/tango4-vantage-1172.dts b/dts/src/arm/tango4-vantage-1172.dts
index 86d8df9880..13bcc460bc 100644
--- a/dts/src/arm/tango4-vantage-1172.dts
+++ b/dts/src/arm/tango4-vantage-1172.dts
@@ -22,7 +22,7 @@
 };
 
 &eth0 {
-	phy-connection-type = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&eth0_phy>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
index 0d1f026d83..6872135d7f 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
@@ -67,14 +67,6 @@
 	};
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -85,13 +77,6 @@
 	bias-pull-up;
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
index 24f1aac366..f82ccf332c 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
@@ -48,18 +48,3 @@
 
 	/* TODO: Camera, touchscreen, etc. */
 };
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
index 08cda24ea1..7c533b6d4b 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
@@ -78,15 +78,6 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rmii_pins>;
-	phy-mode = "rmii";
-	phy-handle = <&ext_rmii_phy1>;
-	status = "okay";
-
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -97,13 +88,6 @@
 	bias-pull-up;
 };
 
-&mdio {
-	ext_rmii_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
index 17eb1cc5bf..d891a1a27f 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -76,21 +76,6 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi
index 9d00622ce8..68aadc9b96 100644
--- a/dts/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi
@@ -449,26 +449,6 @@
 			#size-cells = <0>;
 		};
 
-		emac: ethernet@1c30000 {
-			compatible = "allwinner,sun50i-a64-emac";
-			syscon = <&syscon>;
-			reg = <0x01c30000 0x100>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			resets = <&ccu RST_BUS_EMAC>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu CLK_BUS_EMAC>;
-			clock-names = "stmmaceth";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio: mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
index 9689087611..1c2387bd5d 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -50,7 +50,6 @@
 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -109,22 +108,6 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@7 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
index a8296feee8..4f77c8470f 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,7 +59,6 @@
 	};
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -137,28 +136,12 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
index d906b302cb..6be06873e5 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
@@ -54,7 +54,6 @@
 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -144,28 +143,12 @@
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi
index 732e2e06f5..d9a720bff0 100644
--- a/dts/src/arm64/allwinner/sun50i-h5.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi
@@ -120,5 +120,8 @@
 };
 
 &pio {
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 	compatible = "allwinner,sun50i-h5-pinctrl";
 };
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 35b8c88c32..738ed689ff 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -400,7 +400,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
index 72c5a9f64c..94567eb178 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -109,8 +109,8 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
index 890821d6e5..266fbcf3e4 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -10,12 +10,20 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x-p212.dtsi"
+#include "meson-gxl-s905x.dtsi"
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
 	model = "Libre Technology CC";
 
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cvbs-connector {
 		compatible = "composite-video-connector";
 
@@ -26,6 +34,11 @@
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -53,6 +66,39 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cvbs_vdac_port {
@@ -61,6 +107,16 @@
 	};
 };
 
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -73,20 +129,43 @@
 	};
 };
 
-/*
- * The following devices exists but are exposed on the general
- * purpose GPIO header. End user may well decide to use those pins
- * for another purpose
- */
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
 
-&sd_emmc_a {
-	status = "disabled";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
 };
 
-&uart_A {
-	status = "disabled";
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <50000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
-&wifi32k {
-	status = "disabled";
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };
diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi
index dbcc3d4e2e..51763d6740 100644
--- a/dts/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/src/arm64/marvell/armada-37xx.dtsi
@@ -219,7 +219,7 @@
 				reg = <0x18800 0x100>, <0x18C00 0x20>;
 				gpiosb: gpio {
 					#gpio-cells = <2>;
-					gpio-ranges = <&pinctrl_sb 0 0 29>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
 					gpio-controller;
 					interrupts =
 					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi
index 1eb1f1e9aa..4d360713ed 100644
--- a/dts/src/arm64/marvell/armada-ap806.dtsi
+++ b/dts/src/arm64/marvell/armada-ap806.dtsi
@@ -268,10 +268,10 @@
 				ap_gpio: gpio {
 					compatible = "marvell,armada-8k-gpio";
 					offset = <0x1040>;
-					ngpios = <19>;
+					ngpios = <20>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					gpio-ranges = <&ap_pinctrl 0 0 19>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
 				};
 			};
 		};
diff --git a/dts/src/arm64/marvell/armada-cp110-master.dtsi b/dts/src/arm64/marvell/armada-cp110-master.dtsi
index 726528ce54..4c68605675 100644
--- a/dts/src/arm64/marvell/armada-cp110-master.dtsi
+++ b/dts/src/arm64/marvell/armada-cp110-master.dtsi
@@ -270,6 +270,7 @@
 				interrupt-names = "mem", "ring0", "ring1",
 				"ring2", "ring3", "eip";
 				clocks = <&cpm_clk 1 26>;
+				dma-coherent;
 			};
 		};
 
diff --git a/dts/src/arm64/marvell/armada-cp110-slave.dtsi b/dts/src/arm64/marvell/armada-cp110-slave.dtsi
index 95f8e5f607..923f354b02 100644
--- a/dts/src/arm64/marvell/armada-cp110-slave.dtsi
+++ b/dts/src/arm64/marvell/armada-cp110-slave.dtsi
@@ -64,7 +64,7 @@
 				compatible = "marvell,armada-8k-rtc";
 				reg = <0x284000 0x20>, <0x284080 0x24>;
 				reg-names = "rtc", "rtc-soc";
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			cps_ethernet: ethernet@0 {
@@ -261,6 +261,7 @@
 				interrupt-names = "mem", "ring0", "ring1",
 						  "ring2", "ring3", "eip";
 				clocks = <&cps_clk 1 26>;
+				dma-coherent;
 				/*
 				 * The cryptographic engine found on the cp110
 				 * master is enabled by default at the SoC
diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi
index aef35e0b68..f903957da5 100644
--- a/dts/src/arm64/renesas/salvator-common.dtsi
+++ b/dts/src/arm64/renesas/salvator-common.dtsi
@@ -45,7 +45,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	audio_clkout: audio_clkout {
+	audio_clkout: audio-clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
 		 * but needed to avoid cs2000/rcar_sound probe dead-lock
@@ -508,7 +508,7 @@
 
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
-	clock-frequency = <11289600 12288000>;
+	clock-frequency = <12288000 11289600>;
 
 	status = "okay";
 
diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi
index b5c6ee07d7..d1a3f3b7a0 100644
--- a/dts/src/arm64/renesas/ulcb.dtsi
+++ b/dts/src/arm64/renesas/ulcb.dtsi
@@ -281,7 +281,7 @@
 
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
-	clock-frequency = <11289600 12288000>;
+	clock-frequency = <12288000 11289600>;
 
 	status = "okay";