Merge branch 'for-next/dts'

58 files changed, 237 insertions, 141 deletions

diff --git a/dts/Bindings/misc/arm-charlcd.txt b/dts/Bindings/auxdisplay/arm-charlcd.txt
index e28e2aac47..e28e2aac47 100644
--- a/dts/Bindings/misc/arm-charlcd.txt
+++ b/dts/Bindings/auxdisplay/arm-charlcd.txt
diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt
index 6394ea9e3b..58b12e25bb 100644
--- a/dts/Bindings/display/exynos/exynos_hdmi.txt
+++ b/dts/Bindings/display/exynos/exynos_hdmi.txt
@@ -16,6 +16,7 @@ Required properties:
 - ddc: phandle to the hdmi ddc node
 - phy: phandle to the hdmi phy node
 - samsung,syscon-phandle: phandle for system controller node for PMU.
+- #sound-dai-cells: should be 0.
 
 Required properties for Exynos 4210, 4212, 5420 and 5433:
 - clocks: list of clock IDs from SoC clock driver.
diff --git a/dts/Bindings/dma/mv-xor-v2.txt b/dts/Bindings/dma/mv-xor-v2.txt
index 217a90eaab..9c38bbe7e6 100644
--- a/dts/Bindings/dma/mv-xor-v2.txt
+++ b/dts/Bindings/dma/mv-xor-v2.txt
@@ -11,7 +11,11 @@ Required properties:
   interrupts.
 
 Optional properties:
-- clocks: Optional reference to the clock used by the XOR engine.
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
 
 Example:
 
diff --git a/dts/Bindings/eeprom/at24.txt b/dts/Bindings/eeprom/at24.txt
index 1812c848e3..abfae1beca 100644
--- a/dts/Bindings/eeprom/at24.txt
+++ b/dts/Bindings/eeprom/at24.txt
@@ -38,9 +38,9 @@ Required properties:
 
                 "catalyst",
                 "microchip",
+                "nxp",
                 "ramtron",
                 "renesas",
-                "nxp",
                 "st",
 
                 Some vendors use different model names for chips which are just
diff --git a/dts/Bindings/iio/adc/sigma-delta-modulator.txt b/dts/Bindings/iio/adc/sigma-delta-modulator.txt
index e9ebb8a20e..ba24ca7ba9 100644
--- a/dts/Bindings/iio/adc/sigma-delta-modulator.txt
+++ b/dts/Bindings/iio/adc/sigma-delta-modulator.txt
@@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator
 Required properties:
 - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
 	as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
 
 Example node:
 
 	ads1202: adc@0 {
 		compatible = "sd-modulator";
-		#io-channel-cells = <1>;
+		#io-channel-cells = <0>;
 	};
diff --git a/dts/Bindings/interrupt-controller/renesas,irqc.txt b/dts/Bindings/interrupt-controller/renesas,irqc.txt
index 33c9a10fdc..20f121daa9 100644
--- a/dts/Bindings/interrupt-controller/renesas,irqc.txt
+++ b/dts/Bindings/interrupt-controller/renesas,irqc.txt
@@ -14,6 +14,7 @@ Required properties:
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
     - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77965" (R-Car M3-N)
     - "renesas,intc-ex-r8a77970" (R-Car V3M)
     - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt
index 1d4d0f49c9..8c033d48e2 100644
--- a/dts/Bindings/net/dsa/marvell.txt
+++ b/dts/Bindings/net/dsa/marvell.txt
@@ -50,14 +50,15 @@ Example:
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
 		};
 	};
@@ -74,23 +75,24 @@ Example:
 			compatible = "marvell,mv88e6390";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
-		};
 
-		mdio1 {
-			compatible = "marvell,mv88e6xxx-mdio-external";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy9: switch1phy0@9 {
-				reg = <9>;
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy9: switch1phy0@9 {
+					reg = <9>;
+				};
 			};
 		};
 	};
diff --git a/dts/Bindings/net/renesas,ravb.txt b/dts/Bindings/net/renesas,ravb.txt
index c902261893..b4dc455eb1 100644
--- a/dts/Bindings/net/renesas,ravb.txt
+++ b/dts/Bindings/net/renesas,ravb.txt
@@ -18,6 +18,7 @@ Required properties:
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
       - "renesas,etheravb-rcar-gen3" as a fallback for the above
 		R-Car Gen3 devices.
@@ -26,7 +27,11 @@ Required properties:
 	SoC-specific version corresponding to the platform first followed by
 	the generic version.
 
-- reg: offset and length of (1) the register block and (2) the stream buffer.
+- reg: Offset and length of (1) the register block and (2) the stream buffer.
+       The region for the register block is mandatory.
+       The region for the stream buffer is optional, as it is only present on
+       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796),
+       and M3-N (R8A77965).
 - interrupts: A list of interrupt-specifiers, one for each entry in
 	      interrupt-names.
 	      If interrupt-names is not present, an interrupt specifier
diff --git a/dts/Bindings/power/wakeup-source.txt b/dts/Bindings/power/wakeup-source.txt
index 3c81f78b5c..5d254ab13e 100644
--- a/dts/Bindings/power/wakeup-source.txt
+++ b/dts/Bindings/power/wakeup-source.txt
@@ -60,7 +60,7 @@ Examples
 		#size-cells = <0>;
 
 		button@1 {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <116>;
 			label = "POWER";
diff --git a/dts/Bindings/thermal/imx-thermal.txt b/dts/Bindings/thermal/imx-thermal.txt
index 28be51afdb..379eb76307 100644
--- a/dts/Bindings/thermal/imx-thermal.txt
+++ b/dts/Bindings/thermal/imx-thermal.txt
@@ -22,7 +22,32 @@ Optional properties:
 - clocks : thermal sensor's clock source.
 
 Example:
+ocotp: ocotp@21bc000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,imx6sx-ocotp", "syscon";
+	reg = <0x021bc000 0x4000>;
+	clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+	tempmon_calib: calib@38 {
+		reg = <0x38 4>;
+	};
+
+	tempmon_temp_grade: temp-grade@20 {
+		reg = <0x20 4>;
+	};
+};
+
+tempmon: tempmon {
+	compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,tempmon = <&anatop>;
+	nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+	nvmem-cell-names = "calib", "temp_grade";
+	clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+};
+
+Legacy method (Deprecated):
 tempmon {
 	compatible = "fsl,imx6q-tempmon";
 	fsl,tempmon = <&anatop>;
diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
index e64d903bcb..46da5f1844 100644
--- a/dts/Bindings/usb/dwc2.txt
+++ b/dts/Bindings/usb/dwc2.txt
@@ -19,7 +19,7 @@ Required properties:
   configured in FS mode;
   - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
   configured in HS mode;
-  - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs
+  - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
     configured in HS mode;
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
diff --git a/dts/Bindings/usb/renesas_usb3.txt b/dts/Bindings/usb/renesas_usb3.txt
index 87a45e2f9b..2c071bb580 100644
--- a/dts/Bindings/usb/renesas_usb3.txt
+++ b/dts/Bindings/usb/renesas_usb3.txt
@@ -4,6 +4,7 @@ Required properties:
   - compatible: Must contain one of the following:
 	- "renesas,r8a7795-usb3-peri"
 	- "renesas,r8a7796-usb3-peri"
+	- "renesas,r8a77965-usb3-peri"
 	- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
 	  device
 
diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas_usbhs.txt
index d060172f15..43960faf5a 100644
--- a/dts/Bindings/usb/renesas_usbhs.txt
+++ b/dts/Bindings/usb/renesas_usbhs.txt
@@ -12,6 +12,7 @@ Required properties:
 	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
 	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
+	- "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
 	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
 	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index e2ea59bbca..1651483a70 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -13,6 +13,7 @@ Required properties:
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
     - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
       device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
diff --git a/dts/src/arc/axs101.dts b/dts/src/arc/axs101.dts
index 70aec7d6ca..626b694c7b 100644
--- a/dts/src/arc/axs101.dts
+++ b/dts/src/arc/axs101.dts
@@ -17,6 +17,6 @@
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1";
 	};
 };
diff --git a/dts/src/arc/axs10x_mb.dtsi b/dts/src/arc/axs10x_mb.dtsi
index 74d070cd3c..47b74fbc40 100644
--- a/dts/src/arc/axs10x_mb.dtsi
+++ b/dts/src/arc/axs10x_mb.dtsi
@@ -214,13 +214,13 @@
 			};
 
 			eeprom@0x54{
-				compatible = "24c01";
+				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
 			eeprom@0x57{
-				compatible = "24c04";
+				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;
 			};
diff --git a/dts/src/arc/haps_hs_idu.dts b/dts/src/arc/haps_hs_idu.dts
index 215cddd0b6..0c603308ae 100644
--- a/dts/src/arc/haps_hs_idu.dts
+++ b/dts/src/arc/haps_hs_idu.dts
@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsim_700.dts b/dts/src/arc/nsim_700.dts
index 5ee96b067c..ff2f2c70c5 100644
--- a/dts/src/arc/nsim_700.dts
+++ b/dts/src/arc/nsim_700.dts
@@ -17,7 +17,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsim_hs.dts b/dts/src/arc/nsim_hs.dts
index 8d787b251f..8e2489b16b 100644
--- a/dts/src/arc/nsim_hs.dts
+++ b/dts/src/arc/nsim_hs.dts
@@ -24,7 +24,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsim_hs_idu.dts b/dts/src/arc/nsim_hs_idu.dts
index 4f98ebf71f..ed12f49472 100644
--- a/dts/src/arc/nsim_hs_idu.dts
+++ b/dts/src/arc/nsim_hs_idu.dts
@@ -15,7 +15,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsimosci.dts b/dts/src/arc/nsimosci.dts
index 3c391ba565..7842e5eb4a 100644
--- a/dts/src/arc/nsimosci.dts
+++ b/dts/src/arc/nsimosci.dts
@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsimosci_hs.dts b/dts/src/arc/nsimosci_hs.dts
index 14a727cbf4..b8838cf2b4 100644
--- a/dts/src/arc/nsimosci_hs.dts
+++ b/dts/src/arc/nsimosci_hs.dts
@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arc/nsimosci_hs_idu.dts b/dts/src/arc/nsimosci_hs_idu.dts
index 5052917d4a..72a2c723f1 100644
--- a/dts/src/arc/nsimosci_hs_idu.dts
+++ b/dts/src/arc/nsimosci_hs_idu.dts
@@ -18,7 +18,7 @@
 
 	chosen {
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {
diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi
index b0d8431a37..ae2b8c952e 100644
--- a/dts/src/arm/aspeed-g4.dtsi
+++ b/dts/src/arm/aspeed-g4.dtsi
@@ -42,6 +42,11 @@
 		};
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi
index 40de3b66c3..2477ebc11d 100644
--- a/dts/src/arm/aspeed-g5.dtsi
+++ b/dts/src/arm/aspeed-g5.dtsi
@@ -42,6 +42,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi
index 18045c38bc..db7cded1b7 100644
--- a/dts/src/arm/bcm11351.dtsi
+++ b/dts/src/arm/bcm11351.dtsi
@@ -55,7 +55,7 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi
index 6dde95f21c..266f2611dc 100644
--- a/dts/src/arm/bcm21664.dtsi
+++ b/dts/src/arm/bcm21664.dtsi
@@ -55,7 +55,7 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};
diff --git a/dts/src/arm/bcm2835.dtsi b/dts/src/arm/bcm2835.dtsi
index 0e3d2a5ff2..a5c3824c80 100644
--- a/dts/src/arm/bcm2835.dtsi
+++ b/dts/src/arm/bcm2835.dtsi
@@ -18,10 +18,10 @@
 	soc {
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
 	};
 };
 
diff --git a/dts/src/arm/bcm2836.dtsi b/dts/src/arm/bcm2836.dtsi
index 1dfd764427..c933e84138 100644
--- a/dts/src/arm/bcm2836.dtsi
+++ b/dts/src/arm/bcm2836.dtsi
@@ -9,19 +9,19 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
+	};
 
-		arm-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&local_intc>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-		};
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {
diff --git a/dts/src/arm/bcm2837.dtsi b/dts/src/arm/bcm2837.dtsi
index efa7d3387a..7704bb0296 100644
--- a/dts/src/arm/bcm2837.dtsi
+++ b/dts/src/arm/bcm2837.dtsi
@@ -8,7 +8,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index 18db25a5a6..9d293decf8 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -465,7 +465,7 @@
 			status = "disabled";
 		};
 
-		aux: aux@0x7e215000 {
+		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
 			reg = <0x7e215000 0x8>;
diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts
index 6a44b80217..f0e2008f74 100644
--- a/dts/src/arm/bcm958625hr.dts
+++ b/dts/src/arm/bcm958625hr.dts
@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {
diff --git a/dts/src/arm/gemini-dlink-dns-313.dts b/dts/src/arm/gemini-dlink-dns-313.dts
index 08568ce24d..da8bb9d60f 100644
--- a/dts/src/arm/gemini-dlink-dns-313.dts
+++ b/dts/src/arm/gemini-dlink-dns-313.dts
@@ -269,7 +269,7 @@
 
 		sata: sata@46000000 {
 			/* The ROM uses this muxmode */
-			cortina,gemini-ata-muxmode = <3>;
+			cortina,gemini-ata-muxmode = <0>;
 			cortina,gemini-enable-sata-bridge;
 			status = "okay";
 		};
diff --git a/dts/src/arm/imx6dl-icore-rqs.dts b/dts/src/arm/imx6dl-icore-rqs.dts
index cf42c2f5cd..1281bc39b7 100644
--- a/dts/src/arm/imx6dl-icore-rqs.dts
+++ b/dts/src/arm/imx6dl-icore-rqs.dts
@@ -42,7 +42,7 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
+#include "imx6dl.dtsi"
 #include "imx6qdl-icore-rqs.dtsi"
 
 / {
diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts
index a7a5dc7b27..e7d2db839d 100644
--- a/dts/src/arm/imx7d-sdb.dts
+++ b/dts/src/arm/imx7d-sdb.dts
@@ -82,7 +82,7 @@
 		enable-active-high;
 	};
 
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg2_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/logicpd-som-lv.dtsi b/dts/src/arm/logicpd-som-lv.dtsi
index c1aa7a4518..a30ee9fcb3 100644
--- a/dts/src/arm/logicpd-som-lv.dtsi
+++ b/dts/src/arm/logicpd-som-lv.dtsi
@@ -71,6 +71,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -189,7 +191,12 @@
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {
diff --git a/dts/src/arm/logicpd-torpedo-som.dtsi b/dts/src/arm/logicpd-torpedo-som.dtsi
index b50b796e15..47915447a8 100644
--- a/dts/src/arm/logicpd-torpedo-som.dtsi
+++ b/dts/src/arm/logicpd-torpedo-som.dtsi
@@ -66,6 +66,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -136,6 +138,12 @@
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {
diff --git a/dts/src/arm/omap5-uevm.dts b/dts/src/arm/omap5-uevm.dts
index ec2c8baef6..592e17fd4e 100644
--- a/dts/src/arm/omap5-uevm.dts
+++ b/dts/src/arm/omap5-uevm.dts
@@ -47,7 +47,7 @@
 			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
 			wakeup-source;
 			autorepeat;
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 		};
 	};
 
diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi
index 3b704cfed6..a97458112f 100644
--- a/dts/src/arm/rk3036.dtsi
+++ b/dts/src/arm/rk3036.dtsi
@@ -280,7 +280,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -298,7 +298,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi
index 780ec3a99b..341deaf62f 100644
--- a/dts/src/arm/rk322x.dtsi
+++ b/dts/src/arm/rk322x.dtsi
@@ -621,7 +621,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -634,7 +634,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -649,7 +649,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;
diff --git a/dts/src/arm/rk3288-phycore-som.dtsi b/dts/src/arm/rk3288-phycore-som.dtsi
index 99cfae875e..5eae4776ff 100644
--- a/dts/src/arm/rk3288-phycore-som.dtsi
+++ b/dts/src/arm/rk3288-phycore-som.dtsi
@@ -110,26 +110,6 @@
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;
diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi
index 6102e4e7f3..354aff45c1 100644
--- a/dts/src/arm/rk3288.dtsi
+++ b/dts/src/arm/rk3288.dtsi
@@ -927,6 +927,7 @@
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x10000>;
+		#sound-dai-cells = <0>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1176,6 +1177,7 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
+		#sound-dai-cells = <0>;
 		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
diff --git a/dts/src/arm/sun6i-a31s-sinovoip-bpi-m2.dts b/dts/src/arm/sun6i-a31s-sinovoip-bpi-m2.dts
index 51e6f1d21c..b2758dd8ce 100644
--- a/dts/src/arm/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/dts/src/arm/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -99,6 +98,7 @@
 	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 30000>;
@@ -118,7 +118,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
 	cd-inverted;
@@ -132,7 +132,7 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
@@ -163,6 +163,8 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
 	};
 };
 
@@ -193,7 +195,28 @@
 
 #include "axp22x.dtsi"
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_dc5ldo {
+	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1320000>;
 	regulator-name = "vdd-cpus";
@@ -233,6 +256,40 @@
 	regulator-name = "vcc-dram";
 };
 
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/dts/src/arm/zx296702.dtsi b/dts/src/arm/zx296702.dtsi
index 8a74efdb63..240e7a23d8 100644
--- a/dts/src/arm/zx296702.dtsi
+++ b/dts/src/arm/zx296702.dtsi
@@ -56,7 +56,7 @@
 			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
 		};
 
-		l2cc: l2-cache-controller@0x00c00000 {
+		l2cc: l2-cache-controller@c00000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00c00000 0x1000>;
 			cache-unified;
@@ -67,30 +67,30 @@
 			arm,double-linefill-incr = <0>;
 		};
 
-		pcu: pcu@0xa0008000 {
+		pcu: pcu@a0008000 {
 			compatible = "zte,zx296702-pcu";
 			reg = <0xa0008000 0x1000>;
 		};
 
-		topclk: topclk@0x09800000 {
+		topclk: topclk@9800000 {
 			compatible = "zte,zx296702-topcrm-clk";
 			reg = <0x09800000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp1clk: lsp1clk@0x09400000 {
+		lsp1clk: lsp1clk@9400000 {
 			compatible = "zte,zx296702-lsp1crpm-clk";
 			reg = <0x09400000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp0clk: lsp0clk@0x0b000000 {
+		lsp0clk: lsp0clk@b000000 {
 			compatible = "zte,zx296702-lsp0crpm-clk";
 			reg = <0x0b000000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		uart0: serial@0x09405000 {
+		uart0: serial@9405000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09405000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@0x09406000 {
+		uart1: serial@9406000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09406000 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
 			status = "disabled";
 		};
 
-		mmc0: mmc@0x09408000 {
+		mmc0: mmc@9408000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,7 +119,7 @@
 			status = "disabled";
 		};
 
-		mmc1: mmc@0x0b003000 {
+		mmc1: mmc@b003000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -132,7 +132,7 @@
 			status = "disabled";
 		};
 
-		sysctrl: sysctrl@0xa0007000 {
+		sysctrl: sysctrl@a0007000 {
 			compatible = "zte,sysctrl", "syscon";
 			reg = <0xa0007000 0x1000>;
 		};
diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi
index a80632641b..70c776ef7a 100644
--- a/dts/src/arm64/amlogic/meson-axg.dtsi
+++ b/dts/src/arm64/amlogic/meson-axg.dtsi
@@ -165,14 +165,14 @@
 
 			uart_A: serial@24000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x24000 0x0 0x14>;
+				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@23000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x23000 0x0 0x14>;
+				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 6cb3c2a52b..4ee2e79514 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -235,14 +235,14 @@
 
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
+				reg = <0x0 0x84c0 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
+				reg = <0x0 0x84dc 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -287,7 +287,7 @@
 
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
+				reg = <0x0 0x8700 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -404,14 +404,14 @@
 
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
+				reg = <0x0 0x004c0 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO_B: serial@4e0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004e0 0x0 0x14>;
+				reg = <0x0 0x004e0 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi
index 4f355f17ee..c8514110b9 100644
--- a/dts/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl.dtsi
@@ -631,6 +631,7 @@
 
 			internal_phy: ethernet-phy@8 {
 				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <8>;
 				max-speed = <100>;
 			};
diff --git a/dts/src/arm64/cavium/thunder2-99xx.dtsi b/dts/src/arm64/cavium/thunder2-99xx.dtsi
index 4220fbdcb2..ff5c4c47b2 100644
--- a/dts/src/arm64/cavium/thunder2-99xx.dtsi
+++ b/dts/src/arm64/cavium/thunder2-99xx.dtsi
@@ -98,7 +98,7 @@
 		clock-output-names = "clk125mhz";
 	};
 
-	pci {
+	pcie@30000000 {
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -118,6 +118,7 @@
 		ranges =
 		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
 		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */
diff --git a/dts/src/arm64/hisilicon/hi6220-hikey.dts b/dts/src/arm64/hisilicon/hi6220-hikey.dts
index e94fa1a531..047641fe29 100644
--- a/dts/src/arm64/hisilicon/hi6220-hikey.dts
+++ b/dts/src/arm64/hisilicon/hi6220-hikey.dts
@@ -51,7 +51,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		ramoops@0x21f00000 {
+		ramoops@21f00000 {
 			compatible = "ramoops";
 			reg = <0x0 0x21f00000 0x0 0x00100000>;
 			record-size	= <0x00020000>;
diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi
index 9fbe4705ee..94597e33c8 100644
--- a/dts/src/arm64/mediatek/mt8173.dtsi
+++ b/dts/src/arm64/mediatek/mt8173.dtsi
@@ -341,7 +341,7 @@
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@0x10005000 {
+		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi
index 492a011f14..1c8f1b8647 100644
--- a/dts/src/arm64/qcom/apq8096-db820c.dtsi
+++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi
@@ -140,16 +140,16 @@
 		};
 
 		agnoc@0 {
-			qcom,pcie@00600000 {
+			qcom,pcie@600000 {
 				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00608000 {
+			qcom,pcie@608000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00610000 {
+			qcom,pcie@610000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
 			};
diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi
index 4b2afcc4fd..0a6f7952bb 100644
--- a/dts/src/arm64/qcom/msm8996.dtsi
+++ b/dts/src/arm64/qcom/msm8996.dtsi
@@ -840,7 +840,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			pcie0: qcom,pcie@00600000 {
+			pcie0: qcom,pcie@600000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				status = "disabled";
 				power-domains = <&gcc PCIE0_GDSC>;
@@ -893,7 +893,7 @@
 
 			};
 
-			pcie1: qcom,pcie@00608000 {
+			pcie1: qcom,pcie@608000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE1_GDSC>;
 				bus-range = <0x00 0xff>;
@@ -946,7 +946,7 @@
 						"bus_slave";
 			};
 
-			pcie2: qcom,pcie@00610000 {
+			pcie2: qcom,pcie@610000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE2_GDSC>;
 				bus-range = <0x00 0xff>;
diff --git a/dts/src/arm64/rockchip/rk3328-rock64.dts b/dts/src/arm64/rockchip/rk3328-rock64.dts
index 3890468678..28257724a5 100644
--- a/dts/src/arm64/rockchip/rk3328-rock64.dts
+++ b/dts/src/arm64/rockchip/rk3328-rock64.dts
@@ -132,17 +132,16 @@
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	/* shows instability at 1GBit right now */
-	max-speed = <100>;
 	phy-supply = <&vcc_io>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x26>;
-	rx_delay = <0x11>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi
index a037ee56fe..cae3415544 100644
--- a/dts/src/arm64/rockchip/rk3328.dtsi
+++ b/dts/src/arm64/rockchip/rk3328.dtsi
@@ -730,7 +730,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -741,7 +741,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -752,7 +752,7 @@
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi
index aa4d07046a..03458ac442 100644
--- a/dts/src/arm64/rockchip/rk3368.dtsi
+++ b/dts/src/arm64/rockchip/rk3368.dtsi
@@ -257,7 +257,7 @@
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO0>;
diff --git a/dts/src/arm64/rockchip/rk3399-gru.dtsi b/dts/src/arm64/rockchip/rk3399-gru.dtsi
index 03f1950253..204bdb9857 100644
--- a/dts/src/arm64/rockchip/rk3399-gru.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-gru.dtsi
@@ -406,8 +406,9 @@
 	wlan_pd_n: wlan-pd-n {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
 
-		/* Note the wlan_module_reset_l pinctrl */
 		enable-active-high;
 		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 
@@ -983,12 +984,6 @@ ap_i2c_audio: &i2c8 {
 	pinctrl-0 = <
 		&ap_pwroff	/* AP will auto-assert this when in S3 */
 		&clk_32k	/* This pin is always 32k on gru boards */
-
-		/*
-		 * We want this driven low ASAP; firmware should help us, but
-		 * we can help ourselves too.
-		 */
-		&wlan_module_reset_l
 	>;
 
 	pcfg_output_low: pcfg-output-low {
@@ -1168,12 +1163,7 @@ ap_i2c_audio: &i2c8 {
 		};
 
 		wlan_module_reset_l: wlan-module-reset-l {
-			/*
-			 * We want this driven low ASAP (As {Soon,Strongly} As
-			 * Possible), to avoid leakage through the powered-down
-			 * WiFi.
-			 */
-			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		bt_host_wake_l: bt-host-wake-l {
diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi
index 0f873c897d..ce592a4c0c 100644
--- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi
@@ -457,7 +457,7 @@
 	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
 	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
 	assigned-clock-rates = <100000000>;
-	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi
index 7aa2144e0d..0b81ca1d07 100644
--- a/dts/src/arm64/rockchip/rk3399.dtsi
+++ b/dts/src/arm64/rockchip/rk3399.dtsi
@@ -411,8 +411,8 @@
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy0_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -444,8 +444,8 @@
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy1_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -1739,8 +1739,8 @@
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
 		pinctrl-names = "default";
 		pinctrl-0 = <&edp_hpd>;
 		power-domains = <&power RK3399_PD_EDP>;