mpc83xx: Add support for the MPC8349E-mITX

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>

17 files changed, 1926 insertions, 13 deletions

diff --git a/CREDITS b/CREDITS
index 3f7b510556..802158879f 100644
--- a/CREDITS
+++ b/CREDITS
@@ -465,3 +465,8 @@ N: James MacAulay
 E: james.macaulay@amirix.com
 D: Suppport for Amirix AP1000
 W: www.amirix.com
+
+N: Timur Tabi
+E: timur@freescale.com
+D: Support for MPC8349E-mITX
+W: www.freescale.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 8bb38b5f2e..aaa0825090 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -339,6 +339,10 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
+Timur Tabi <timur@freescale.com>
+
+	MPC8349E-mITX		MPC8349
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 879a17f9cc..c29dd54f93 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -130,7 +130,7 @@ LIST_8260="	\
 #########################################################################
 
 LIST_83xx="	\
-	TQM834x		MPC8349EMDS					\
+	TQM834x		MPC8349EMDS	MPC8349ITX			\
 "
 
 
diff --git a/Makefile b/Makefile
index 782893b75f..ac7ca4a561 100644
--- a/Makefile
+++ b/Makefile
@@ -1591,6 +1591,9 @@ TQM834x_config:	unconfig
 MPC8349EMDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
 
+MPC8349ITX_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
diff --git a/README b/README
index 6b94f8482c..5c907c8f07 100644
--- a/README
+++ b/README
@@ -2249,6 +2249,14 @@ Low Level (hardware related) configuration options:
 		If SPD EEPROM is on an I2C bus other than the first one, specify here.
 		Note that the value must resolve to something your driver can deal with.
 
+- CFG_83XX_DDR_USES_CS0
+		Only for 83xx systems. If specified, then DDR should be configured
+		using CS0 and CS1 instead of CS2 and CS3.
+
+- CFG_83XX_DDR_USES_CS0
+		Only for 83xx systems. If specified, then DDR should be configured
+		using CS0 and CS1 instead of CS2 and CS3.
+
 - CONFIG_ETHER_ON_FEC[12]
 		Define to enable FEC[12] on a 8xx series processor.
 
diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c
index a4d6508bb0..a916245aea 100644
--- a/board/mpc8349emds/pci.c
+++ b/board/mpc8349emds/pci.c
@@ -138,18 +138,18 @@ void
 pci_init_board(void)
 {
 	volatile immap_t *	immr;
-	volatile clk8349_t *	clk;
-	volatile law8349_t *	pci_law;
-	volatile pot8349_t *	pci_pot;
-	volatile pcictrl8349_t *	pci_ctrl;
-	volatile pciconf8349_t *	pci_conf;
+	volatile clk83xx_t *	clk;
+	volatile law83xx_t *	pci_law;
+	volatile pot83xx_t *	pci_pot;
+	volatile pcictrl83xx_t *	pci_ctrl;
+	volatile pciconf83xx_t *	pci_conf;
 	u16 reg16;
 	u32 reg32;
 	u32 dev;
 	struct	pci_controller * hose;
 
 	immr = (immap_t *)CFG_IMMRBAR;
-	clk = (clk8349_t *)&immr->clk;
+	clk = (clk83xx_t *)&immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
 	pci_ctrl = immr->pci_ctrl;
diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile
new file mode 100644
index 0000000000..31bcdb8642
--- /dev/null
+++ b/board/mpc8349itx/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o pci.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk
new file mode 100644
index 0000000000..2e113118bd
--- /dev/null
+++ b/board/mpc8349itx/config.mk
@@ -0,0 +1,33 @@
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8349ITX
+#
+
+TEXT_BASE  =   0xFEF00000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c
new file mode 100644
index 0000000000..9a5cbec858
--- /dev/null
+++ b/board/mpc8349itx/mpc8349itx.c
@@ -0,0 +1,461 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+
+#ifdef CONFIG_PCI
+#include <asm/mpc8349_pci.h>
+#include <pci.h>
+#endif
+
+#ifdef CONFIG_SPD_EEPROM
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+
+#ifndef CONFIG_SPD_EEPROM
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+	u32 ddr_size;		/* The size of RAM, in bytes */
+	u32 ddr_size_log2 = 0;
+
+	for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
+		if (ddr_size & 1) {
+			return -1;
+		}
+		ddr_size_log2++;
+	}
+
+	im->sysconf.ddrlaw[0].ar =
+	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+
+	/* Only one CS0 for DDR */
+	im->ddr.csbnds[0].csbnds = 0x0000000f;
+	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+
+	debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
+
+	debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
+	debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
+
+	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
+	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR;
+	im->ddr.sdram_mode =
+	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
+	im->ddr.sdram_interval =
+	    (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
+						       SDRAM_INTERVAL_BSTOPRE_SHIFT);
+	im->ddr.sdram_clk_cntl =
+	    DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
+
+	udelay(200);
+
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+	debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
+	debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
+	debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
+	debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
+	debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
+
+	return CFG_DDR_SIZE;
+}
+#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
+	{
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 0x0f,
+	 PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {
+	  PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+}
+#endif
+
+volatile static struct pci_controller hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc83xxmitx_config_table,
+#endif
+	 },
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc83xxmitx_config_table,
+#endif
+	 }
+};
+#endif				/* CONFIG_PCI */
+
+/* If MPC8349E-mITX is soldered with SDRAM, then initialize it.
+*/
+
+void sdram_init(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus83xx_t *lbc = &immap->lbus;
+
+#if defined(CFG_BR2_PRELIM) \
+	&& defined(CFG_OR2_PRELIM) \
+	&& defined(CFG_LBLAWBAR2_PRELIM) \
+	&& defined(CFG_LBLAWAR2_PRELIM) \
+	&& !defined(CONFIG_COMPACT_FLASH)
+
+	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+	puts("\n   SDRAM on Local Bus: ");
+	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+	 */
+
+	/*setup mtrpt, lsrt and lbcr for LB bus */
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+
+	/*
+	 * Configure the SDRAM controller Machine Mode register.
+	 */
+	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* 0x40636733; normal operation */
+
+	lbc->lsdmr = CFG_LBC_LSDMR_1;	/*0x68636733; precharge all the banks */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	lbc->lsdmr = CFG_LBC_LSDMR_2;	/*0x48636733; auto refresh */
+	asm("sync");
+	*sdram_addr = 0xff; /*1 time*/
+	udelay(100);
+	*sdram_addr = 0xff; /*2 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*3 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*4 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*5 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*6 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*7 times*/
+	udelay(100);
+	*sdram_addr = 0xff; /*8 times*/
+	udelay(100);
+
+	lbc->lsdmr = CFG_LBC_LSDMR_4;	/*0x58636733;mode register write operation */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	lbc->lsdmr = CFG_LBC_LSDMR_5;	/*0x40636733;normal operation */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+#else
+	puts("SDRAM on Local Bus is NOT available!\n");
+
+#ifdef CFG_BR2_PRELIM
+	lbc->bank[2].br = CFG_BR2_PRELIM;
+	lbc->bank[2].or = CFG_OR2_PRELIM;
+#endif
+
+#ifdef CFG_BR3_PRELIM
+	lbc->bank[3].br = CFG_BR3_PRELIM;
+	lbc->bank[3].or = CFG_OR3_PRELIM;
+#endif
+#endif
+}
+
+long int initdram(int board_type)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+	u32 msize = 0;
+#ifdef CONFIG_DDR_ECC
+	volatile ddr83xx_t *ddr = &im->ddr;
+#endif
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+		return -1;
+
+	/* DDR SDRAM - Main SODIMM */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#ifdef CONFIG_SPD_EEPROM
+	msize = spd_sdram();
+#else
+	msize = fixed_sdram();
+#endif
+
+#ifdef CONFIG_DDR_ECC
+	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
+		/* Unlike every other board, on the 83xx spd_sdram() returns
+		   megabytes instead of just bytes.  That's why we need to
+		   multiple by 1MB when calling ddr_enable_ecc(). */
+		ddr_enable_ecc(msize * 1048576);
+#endif
+
+	/*
+	 * Initialize SDRAM if it is on local bus.
+	 */
+	sdram_init();
+	puts("   DDR RAM: ");
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+#ifdef CONFIG_HARD_I2C
+	u8 i2c_data;
+#endif
+
+	puts("Board: Freescale MPC8349E-mITX");
+
+#ifdef CONFIG_HARD_I2C
+	i2c_set_bus_num(I2C_BUS_2);
+	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) ==
+	    0)
+		printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1,
+		       i2c_data & 0x01);
+	else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data))
+		 == 0)
+		printf(" %u.%u (PCF8475)", (i2c_data & 0x02) >> 1,
+		       i2c_data & 0x01);
+	else
+		printf(" ?.?");
+#endif
+
+	puts("\n");
+
+	return 0;
+}
+
+/**
+ * Implement a work-around for a hardware problem with compact
+ * flash.
+ *
+ * Program the UPM if compact flash is enabled.
+ */
+int misc_init_f(void)
+{
+	volatile u32 *vsc7385_cpuctrl;
+
+	/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register.  The power up
+	   default of VSC7385 L1_IRQ and L2_IRQ requests are active high.  That
+	   means it is 0 when the IRQ is not active.  This makes the wire-AND
+	   logic always assert IRQ7 to CPU even if there is no request from the
+	   switch.  Since the compact flash and the switch share the same IRQ,
+	   the Linux kernel will think that the compact flash is requesting irq
+	   and get stuck when it tries to clear the IRQ.  Thus we need to set
+	   the L2_IRQ0 and L2_IRQ1 to active low.
+
+	   The following code sets the L1_IRQ and L2_IRQ polarity to active low.
+	   Without this code, compact flash will not work in Linux because
+	   unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
+	   don't enable compact flash for U-Boot.
+	 */
+
+	vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
+	*vsc7385_cpuctrl |= 0x0c;
+
+#ifdef CONFIG_COMPACT_FLASH
+	/* UPM Table Configuration Code */
+	static uint UPMATable[] = {
+		0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
+		0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
+		0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
+	};
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus83xx_t *lbus = &immap->lbus;
+
+	lbus->bank[3].br = CFG_BR3_PRELIM;
+	lbus->bank[3].or = CFG_OR3_PRELIM;
+
+	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
+	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
+	 */
+	lbus->mamr = 0x08404440;
+
+	upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
+
+	puts("UPMA:  Configured for compact flash\n");
+#endif
+
+	return 0;
+}
+
+/**
+ * Make sure the EEPROM has the HRCW correctly programmed.
+ * Make sure the RTC is correctly programmed.
+ *
+ * The MPC8349E-mITX can be configured to load the HRCW from
+ * EEPROM instead of flash.  This is controlled via jumpers
+ * LGPL0, 1, and 3.  Normally, these jumpers are set to 000 (all
+ * jumpered), but if they're set to 001 or 010, then the HRCW is
+ * read from the "I2C EEPROM".
+ *
+ * This function makes sure that the I2C EEPROM is programmed
+ * correctly.
+ */
+int misc_init_r(void)
+{
+	int rc = 0;
+
+#ifdef CONFIG_HARD_I2C
+
+	uchar orig_bus = i2c_get_bus_num();;
+
+#ifdef CFG_I2C_RTC_ADDR
+	char ds1339_data[17];
+#endif
+
+#ifdef CFG_I2C_EEPROM_ADDR
+	static u8 eeprom_data[] =	/* HRCW data */
+	{
+		0xaa, 0x55, 0xaa,
+		0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00,
+		0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00,
+	};
+
+	u8 data[sizeof(eeprom_data)];
+
+	i2c_set_bus_num(I2C_BUS_1);
+
+	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
+		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
+			if (i2c_write
+			    (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
+			     sizeof(eeprom_data)) != 0) {
+				puts("Failure writing the HRCW to EEPROM via I2C.\n");
+				rc = 1;
+			}
+		}
+	} else {
+		puts("Failure reading the HRCW from EEPROM via I2C.\n");
+		rc = 1;
+	}
+#endif
+
+#ifdef CFG_I2C_RTC_ADDR
+	i2c_set_bus_num(I2C_BUS_2);
+
+	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
+	    == 0) {
+
+		/* Work-around for MPC8349E-mITX bug #13601.
+		   If the RTC does not contain valid register values, the DS1339
+		   Linux driver will not work.
+		 */
+
+		/* Make sure status register bits 6-2 are zero */
+		ds1339_data[0x0f] &= ~0x7c;
+
+		/* Check for a valid day register value */
+		ds1339_data[0x03] &= ~0xf8;
+		if (ds1339_data[0x03] == 0) {
+			ds1339_data[0x03] = 1;
+		}
+
+		/* Check for a valid date register value */
+		ds1339_data[0x04] &= ~0xc0;
+		if ((ds1339_data[0x04] == 0) ||
+		    ((ds1339_data[0x04] & 0x0f) > 9) ||
+		    (ds1339_data[0x04] >= 0x32)) {
+			ds1339_data[0x04] = 1;
+		}
+
+		/* Check for a valid month register value */
+		ds1339_data[0x05] &= ~0x60;
+
+		if ((ds1339_data[0x05] == 0) ||
+		    ((ds1339_data[0x05] & 0x0f) > 9) ||
+		    ((ds1339_data[0x05] >= 0x13)
+		     && (ds1339_data[0x05] <= 0x19))) {
+			ds1339_data[0x05] = 1;
+		}
+
+		/* Enable Oscillator and rate select */
+		ds1339_data[0x0e] = 0x1c;
+
+		/* Work-around for MPC8349E-mITX bug #13330.
+		   Ensure that the RTC control register contains the value 0x1c.
+		   This affects SATA performance.
+		 */
+
+		if (i2c_write
+		    (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
+		     sizeof(ds1339_data))) {
+			puts("Failure writing to the RTC via I2C.\n");
+			rc = 1;
+		}
+	} else {
+		puts("Failure reading from the RTC via I2C.\n");
+		rc = 1;
+	}
+#endif
+
+	i2c_set_bus_num(orig_bus);
+#endif
+
+	return rc;
+}
diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c
new file mode 100644
index 0000000000..247b3a6ecc
--- /dev/null
+++ b/board/mpc8349itx/pci.c
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/mmu.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8349itx_config_table[] = {
+	{
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER,
+	 PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {
+	  PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+};
+#endif
+
+static struct pci_controller pci_hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc8349itx_config_table,
+#endif
+	 },
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc8349itx_config_table,
+#endif
+	 }
+};
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ * NOTICE: PCI2 is not currently supported
+ *
+ */
+void pci_init_board(void)
+{
+	volatile immap_t *immr;
+	volatile clk83xx_t *clk;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+	u8 reg8;
+	u16 reg16;
+	u32 reg32;
+	u32 dev;
+	struct pci_controller *hose;
+
+	immr = (immap_t *) CFG_IMMRBAR;
+	clk = (clk83xx_t *) & immr->clk;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+
+	hose = &pci_hose[0];
+
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+	 */
+
+	reg32 = clk->occr;
+	udelay(2000);
+
+#ifdef CONFIG_HARD_I2C
+	i2c_set_bus_num(I2C_BUS_2);
+	/* Read the PCI_M66EN jumper setting */
+	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
+	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
+		if (reg8 & I2C_8574_PCI66)
+			clk->occr = 0xff000000;	/* 66 MHz PCI */
+		else
+			clk->occr = 0xff600001;	/* 33 MHz PCI */
+	} else {
+		clk->occr = 0xff600001;	/* 33 MHz PCI */
+	}
+#else
+	clk->occr = 0xff000000;	/* 66 MHz PCI */
+#endif
+
+	udelay(2000);
+
+	/*
+	 * Release PCI RST Output signal
+	 */
+	pci_ctrl[0].gcr = 0;
+	udelay(2000);
+	pci_ctrl[0].gcr = 1;
+
+#ifdef CONFIG_MPC83XX_PCI2
+	pci_ctrl[1].gcr = 0;
+	udelay(2000);
+	pci_ctrl[1].gcr = 1;
+#endif
+
+	/* We need to wait at least a 1sec based on PCI specs */
+	{
+		int i;
+
+		for (i = 0; i < 1000; i++)
+			udelay(1000);
+	}
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+
+	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI1 mem space - prefetch */
+	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].pocmr =
+	    POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI1 IO space */
+	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+	/* PCI1 mmio - non-prefetch mem space */
+	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+
+	/* we need RAM mapped to PCI space for the devices to
+	 * access main memory */
+	pci_ctrl[0].pitar1 = 0x0;
+	pci_ctrl[0].pibar1 = 0x0;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+	    PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* PCI memory prefetch space */
+	pci_set_region(hose->regions + 0,
+		       CFG_PCI1_MEM_BASE,
+		       CFG_PCI1_MEM_PHYS,
+		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 1,
+		       CFG_PCI1_MMIO_BASE,
+		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 2,
+		       CFG_PCI1_IO_BASE,
+		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose->regions + 3,
+		       CONFIG_PCI_SYS_MEM_BUS,
+		       CONFIG_PCI_SYS_MEM_PHYS,
+		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose->region_count = 4;
+
+	pci_setup_indirect(hose,
+			   (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write to Command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC83XX_PCI2
+	hose = &pci_hose[1];
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI2 mem space - prefetch */
+	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[3].pocmr =
+	    POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M &
+							 POCMR_CM_MASK);
+
+	/* PCI2 IO space */
+	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[4].pocmr =
+	    POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+	/* PCI2 mmio - non-prefetch mem space */
+	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[5].pocmr =
+	    POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+
+	/* we need RAM mapped to PCI space for the devices to
+	 * access main memory */
+	pci_ctrl[1].pitar1 = 0x0;
+	pci_ctrl[1].pibar1 = 0x0;
+	pci_ctrl[1].piebar1 = 0x0;
+	pci_ctrl[1].piwar1 =
+	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+	    (__ilog2(gd->ram_size) - 1);
+
+	hose->first_busno = pci_hose[0].last_busno + 1;
+	hose->last_busno = 0xff;
+
+	/* PCI memory prefetch space */
+	pci_set_region(hose->regions + 0,
+		       CFG_PCI2_MEM_BASE,
+		       CFG_PCI2_MEM_PHYS,
+		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 1,
+		       CFG_PCI2_MMIO_BASE,
+		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 2,
+		       CFG_PCI2_IO_BASE,
+		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose->regions + 3,
+		       CONFIG_PCI_SYS_MEM_BUS,
+		       CONFIG_PCI_SYS_MEM_PHYS,
+		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose->region_count = 4;
+
+	pci_setup_indirect(hose,
+			   (CFG_IMMRBAR + 0x8380), (CFG_IMMRBAR + 0x8384));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write to Command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+
+#endif				/* CONFIG_PCI */
diff --git a/board/mpc8349itx/u-boot.lds b/board/mpc8349itx/u-boot.lds
new file mode 100644
index 0000000000..f044c0f00e
--- /dev/null
+++ b/board/mpc8349itx/u-boot.lds
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc83xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 8d543d5c99..4e82a8b789 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -69,9 +69,72 @@ int checkcpu(void)
 }
 
 
+/**
+ * Program a UPM with the code supplied in the table.
+ *
+ * The 'dummy' variable is used to increment the MAD. 'dummy' is
+ * supposed to be a pointer to the memory of the device being
+ * programmed by the UPM.  The data in the MDR is written into
+ * memory and the MAD is incremented every time there's a read
+ * from 'dummy'. Unfortunately, the current prototype for this
+ * function doesn't allow for passing the address of this
+ * device, and changing the prototype will break a number lots
+ * of other code, so we need to use a round-about way of finding
+ * the value for 'dummy'.
+ *
+ * The value can be extracted from the base address bits of the
+ * Base Register (BR) associated with the specific UPM.  To find
+ * that BR, we need to scan all 8 BRs until we find the one that
+ * has its MSEL bits matching the UPM we want.  Once we know the
+ * right BR, we can extract the base address bits from it.
+ *
+ * The MxMR and the BR and OR of the chosen bank should all be
+ * configured before calling this function.
+ *
+ * Parameters:
+ * upm: 0=UPMA, 1=UPMB, 2=UPMC
+ * table: Pointer to an array of values to program
+ * size: Number of elements in the array.  Must be 64 or less.
+*/
 void upmconfig (uint upm, uint *table, uint size)
 {
-	hang();		/* FIXME: upconfig() needed? */
+#if defined(CONFIG_MPC834X)
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus83xx_t *lbus = &immap->lbus;
+	volatile uchar *dummy = NULL;
+	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
+	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
+	uint i;
+
+	/* Scan all the banks to determine the base address of the device */
+	for (i = 0; i < 8; i++) {
+		if ((lbus->bank[i].br & BR_MSEL) == msel) {
+			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+			break;
+		}
+	}
+
+	if (!dummy) {
+		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+		hang();
+	}
+
+	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
+	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
+
+	for (i = 0; i < size; i++) {
+		lbus->mdr = table[i];
+		__asm__ __volatile__ ("sync");
+		*dummy;	/* Write the value to memory and increment MAD */
+		__asm__ __volatile__ ("sync");
+	}
+
+	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
+	*mxmr &= 0xCFFFFFC0;
+#else
+	printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
+	hang();
+#endif
 }
 
 
@@ -150,9 +213,21 @@ unsigned long get_tbclk(void)
 #if defined(CONFIG_WATCHDOG)
 void watchdog_reset (void)
 {
-	hang();		/* FIXME: implement watchdog_reset()? */
+#ifdef CONFIG_MPC834X
+	int re_enable = disable_interrupts();
+
+	/* Reset the 83xx watchdog */
+	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+	immr->wdt.swsrr = 0x556c;
+	immr->wdt.swsrr = 0xaa39;
+
+	if (re_enable)
+		enable_interrupts ();
+#else
+	hang();
+#endif
 }
-#endif /* CONFIG_WATCHDOG */
+#endif
 
 #if defined(CONFIG_OF_FLAT_TREE)
 void
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 6ed0992c07..999fe71964 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -46,6 +46,37 @@ void cpu_init_f (volatile immap_t * im)
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
+	/* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+	/* Arbiter pipeline depth */
+	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC1EP
+	/* TSEC1 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC2EP
+	/* TSEC2 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC1CM
+	/* TSEC1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
+#endif
+#ifdef CFG_SCCR_TSEC2CM
+	/* TSEC2 & I2C1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+	/* Arbiter repeat count */
+	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
+#endif
+
 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
 	gd->reset_status = im->reset.rsr;
 	im->reset.rsr = ~(RSR_RES);
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 8ee4234631..3dfde8ac04 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -133,6 +133,26 @@ long int spd_sdram()
 
 
         /* Read SPD parameters with I2C */
+#ifdef CFG_83XX_DDR_USES_CS0
+	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+	ddr->cs_config[0] = ( 1 << 31
+			    | (spd.nrow_addr - 12) << 8
+			    | (spd.ncol_addr - 8) );
+	debug("\n");
+	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+	if (spd.nrows == 2) {
+		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1) );
+		ddr->cs_config[1] = ( 1<<31
+				    | (spd.nrow_addr-12) << 8
+				    | (spd.ncol_addr-8) );
+		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+	}
+
+#else
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
@@ -180,6 +200,7 @@ long int spd_sdram()
 		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
 		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
 	}
+#endif
 
 	if (spd.mem_type != 0x07) {
 		puts("No DDR module found!\n");
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 6815c153d8..2524e4f6d2 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -1110,10 +1110,8 @@ struct phy_info phy_info_dp83865 = {
 };
 
 struct phy_info *phy_info[] = {
-#if 0
-	&phy_info_cis8201,
-#endif
 	&phy_info_cis8204,
+	&phy_info_cis8201,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
 	&phy_info_M88E1145,
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 40624e8291..bc6196cc88 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -82,15 +82,25 @@ typedef struct sysconf83xx {
 	u8 res5[0x04];
 	u32 spcr; /* System Priority Configuration Register */
 #define SPCR_PCIHPE   0x10000000 /* PCI Highest Priority Enable. */
+#define SPCR_PCIHPE_SHIFT	(31-3)
 #define SPCR_PCIPR    0x03000000 /* PCI bridge system bus request priority. */
+#define SPCR_PCIPR_SHIFT	(31-7)
 #define SPCR_TBEN     0x00400000 /* E300 PowerPC core time base unit enable. */
+#define SPCR_TBEN_SHIFT		(31-9)
 #define SPCR_COREPR   0x00300000 /* E300 PowerPC Core system bus request priority. */
+#define SPCR_COREPR_SHIFT	(31-11)
 #define SPCR_TSEC1DP  0x00003000 /* TSEC1 data priority. */
+#define SPCR_TSEC1DP_SHIFT	(31-19)
 #define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1BDP_SHIFT	(31-21)
 #define SPCR_TSEC1EP  0x00000300 /* TSEC1 emergency priority. */
+#define SPCR_TSEC1EP_SHIFT	(31-23)
 #define SPCR_TSEC2DP  0x00000030 /* TSEC2 data priority. */
+#define SPCR_TSEC2DP_SHIFT	(31-27)
 #define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2BDP_SHIFT	(31-29)
 #define SPCR_TSEC2EP  0x00000003 /* TSEC2 emergency priority. */
+#define SPCR_TSEC2EP_SHIFT	(31-31)
 #define SPCR_RES      ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
 			| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
 			| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
@@ -416,11 +426,17 @@ typedef struct ipic83xx {
 typedef struct arbiter83xx {
 	u32 acr; /* Arbiter Configuration Register */
 #define ACR_COREDIS    0x10000000 /* Core disable. */
+#define ACR_COREDIS_SHIFT		(31-7)
 #define ACR_PIPE_DEP   0x00070000 /* Pipeline depth (number of outstanding transactions). */
+#define ACR_PIPE_DEP_SHIFT		(31-15)
 #define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+#define ACR_PCI_RPTCNT_SHIFT		(31-19)
 #define ACR_RPTCNT     0x00000700 /* Repeat count. */
+#define ACR_RPTCNT_SHIFT		(31-23)
 #define ACR_APARK      0x00000030 /* Address parking. */
+#define ACR_APARK_SHIFT			(31-27)
 #define ACR_PARKM	   0x0000000F /* Parking master. */
+#define ACR_PARKM_SHIFT			(31-31)
 #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
 	u32 atr; /* Arbiter Timers Register */
 #define ATR_DTO 0x00FF0000 /* Data time out. */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
new file mode 100644
index 0000000000..aed350fe09
--- /dev/null
+++ b/include/configs/MPC8349ITX.h
@@ -0,0 +1,753 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ MPC8349E-mITX board configuration file
+
+ Memory map:
+
+ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
+ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
+ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
+ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
+ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
+ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
+ 0xF000_0000-0xF000_FFFF Compact Flash
+ 0xF001_0000-0xF001_FFFF Local bus expansion slot
+ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
+ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
+ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
+
+ I2C address list:
+ 						Align.	Board
+ Bus	Addr    Part No.	Description	Length	Location
+ ----------------------------------------------------------------
+ I2C1	0x50    M24256-BWMN6P	Board EEPROM	2       U64
+
+ I2C2	0x20    PCF8574		I2C Expander	0	U8
+ I2C2	0x21    PCF8574		I2C Expander	0       U10
+ I2C2	0x38    PCF8574A	I2C Expander    0	U8
+ I2C2	0x39    PCF8574A	I2C Expander	0	U10
+ I2C2	0x51    (DDR)		DDR EEPROM	1	U1
+ I2C2	0x68    DS1339		RTC		1	U68
+
+ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC8349		/* MPC8349 specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
+#define CONFIG_RTC_DS1337
+
+/* I2C */
+#define CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET      	0x3000
+#define CFG_I2C2_OFFSET      	0x3100
+#define CFG_SPD_BUS_NUM		I2C_2
+
+#define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
+#define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
+#define CFG_I2C_8574A_ADDR1	0x38	/* I2C2, PCF8574A */
+#define CFG_I2C_8574A_ADDR2	0x39	/* I2C2, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C1, Board EEPROM */
+#define CFG_I2C_RTC_ADDR	0x68	/* I2C2, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS	0x51	/* I2C2, DDR */
+
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+
+/* Don't probe these addresses: */
+#define CFG_I2C_NOPROBES        {{1, CFG_I2C_8574_ADDR1}, \
+				 {1, CFG_I2C_8574_ADDR2}, \
+				 {1, CFG_I2C_8574A_ADDR1}, \
+				 {1, CFG_I2C_8574A_ADDR2}}
+/* Bit definitions for the 8574[A] I2C expander */
+#define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
+#define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
+#define I2C_8574_MPCICLKRN	0x10	/* MiniPCI Clk Run */
+#define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
+#define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
+
+#undef CONFIG_SOFT_I2C
+
+#endif
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66666666	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66666666
+#else
+#define CONFIG_SYS_CLK_FREQ	33333333
+#endif
+#endif
+
+#define CFG_IMMRBAR		0xE0000000	/* The IMMR is relocated to here */
+
+#undef CFG_DRAM_TEST                   		/* memory test, takes time */
+#define CFG_MEMTEST_START       0x00003000      /* memtest region */
+#define CFG_MEMTEST_END         0x07100000      /* only has 128M */
+
+/*
+ * DDR Setup
+ */
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+#define CFG_83XX_DDR_USES_CS0
+
+#ifndef CONFIG_SPD_EEPROM
+/*
+ * Manually set up DDR parameters
+ */
+    #define CFG_DDR_SIZE	256		/* Mb */
+    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+    #define CFG_DDR_TIMING_1	0x26242321
+    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
+#endif
+
+/* FLASH on the Local Bus */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16Mb window bytes */
+
+/* VSC7385 on the Local Bus */
+#define CFG_VSC7385_BASE	0xF8000000	/* start of VSC7385   */
+
+#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CFG_OR1_PRELIM		(0xFFFE0000 /* 128KB */ | \
+				OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE	/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR1_PRELIM	0x80000010		/* Access window size 128K */
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_LED_BASE		0xF9000000  /* start of LED and Board ID */
+#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
+#define CFG_OR2_PRELIM		(0xFFE00000 /* 2MB */ | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
+				OR_GPCM_SCY_9 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#ifdef CONFIG_COMPACT_FLASH
+
+#define CFG_CF_BASE	    	0xF0000000
+
+#define CFG_BR3_PRELIM      	(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CFG_OR3_PRELIM	    	(OR_UPM_AM | OR_UPM_BI)
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_CF_BASE	/* Window base at flash base + LED & Board ID */
+#define CFG_LBLAWAR2_PRELIM 	0x8000000F	/* 64K bytes */
+
+#undef CONFIG_IDE_RESET
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	1
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
+#define CFG_ATA_DATA_OFFSET	0x0000
+#define CFG_ATA_REG_OFFSET	0
+#define CFG_ATA_ALT_OFFSET	0x0200
+#define CFG_ATA_STRIDE		2
+
+#define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
+
+#endif
+
+#define CONFIG_DOS_PARTITION
+
+#define CFG_MID_FLASH_JUMP      0x7F000000
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x1000	     /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE  	0x100     /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#undef CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+
+#define CFG_BR2_PRELIM		(CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
+#define CFG_OR2_PRELIM		(0xFC000000 /* 64 MB */ | \
+				 OR_SDRAM_XAM | \
+				 ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
+				 ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
+				 OR_SDRAM_EAD)
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+				| CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_MPC83XX_PCI2
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xE2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
+#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
+#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#endif
+
+#define _IO_BASE		0x00000000	/* points to PCI I/O space */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)	    (x)
+#endif
+
+#ifndef CONFIG_PCI_PNP
+    #define PCI_ENET0_IOADDR	0x00000000
+    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
+    #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#endif
+
+/* TSEC */
+
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE		/* In case CFG_CMD_MII is specified */
+
+#define CONFIG_MPC83XX_TSEC1
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_MPC83XX_TSEC1_NAME  "TSEC0"
+#define CFG_TSEC1_OFFSET 	0x24000
+#define TSEC1_PHY_ADDR		0x1c    /* VSC8201 uses address 0x1c */
+#define TSEC1_PHYIDX		0
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_MPC83XX_TSEC2_NAME  "TSEC1"
+#define CFG_TSEC2_OFFSET 	0x25000
+#define CONFIG_UNKNOWN_TSEC	/* TSEC2 is proprietary */
+#define TSEC2_PHY_ADDR		4
+#define TSEC2_PHYIDX		0
+#endif
+
+#define CONFIG_ETHPRIME		"Freescale TSEC"
+
+#endif
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/* CONFIG_COMMANDS */
+
+#ifdef CONFIG_COMPACT_FLASH
+#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
+#else
+#define CONFIG_COMMANDS_CF	0
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
+#else
+#define CONFIG_COMMANDS_PCI	0
+#endif
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_I2C	0
+#endif
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				CONFIG_COMMANDS_CF	| \
+				CFG_CMD_NET 	| \
+				CFG_CMD_PING 	| \
+				CONFIG_COMMANDS_I2C 	| \
+				CONFIG_COMMANDS_PCI 	| \
+				CFG_CMD_SDRAM 	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_IRQ)
+#include <cmd_confdefs.h>
+
+/* Watchdog */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+#ifdef CONFIG_WATCHDOG
+#define CFG_WATCHDOG_VALUE      0xFFFFFFC3
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"MPC8349E-mITX> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE 	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef PCI_64BIT
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System performance */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C1 clock mode (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
+#define CFG_SICRL SICRL_LDP_A
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 	HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L	0
+#define CFG_IBAT1U	0
+#define CFG_IBAT2L	0
+#define CFG_IBAT2U	0
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	0
+#define CFG_IBAT3U	0
+#define CFG_IBAT4L	0
+#define CFG_IBAT4U	0
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L	0
+#define CFG_IBAT7U	0
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_ETHADDR		00:E0:0C:00:8C:01
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
+#endif
+
+#define CONFIG_IPADDR		10.82.19.159
+#define CONFIG_SERVERIP		10.82.48.106
+#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_NETMASK		255.255.252.0
+
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE		timur/uImage
+
+#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#define CONFIG_UBOOTSTART	fe700000
+#define CONFIG_UBOOTEND		fe77ffff
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTDELAY	6
+#else
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#endif
+
+#define CONFIG_BOOTARGS \
+	"root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=ttyS0,$baudrate $othbootargs"
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=eth0\0" \
+	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
+		"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
+	"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"protect off FEF00000 FEF7FFFF; " \
+		"erase FEF00000 FEF7FFFF; " \
+		"cp.b $loadaddr FEF00000 $filesize; " \
+		"protect on FEF00000 FEF7FFFF; " \
+		"cmp.b $loadaddr FEF00000 $filesize\0" \
+	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
+	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"
+
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif