remove old board supports

972 files changed, 0 insertions, 225963 deletions

diff --git a/board/MAI/bios_emulator/bios.c b/board/MAI/bios_emulator/bios.c
deleted file mode 100644
index d51eb64692..0000000000
--- a/board/MAI/bios_emulator/bios.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Mostly done after the Scitech Bios emulation
- * Written by Hans-Jörg Frieden
- * Hyperion Entertainment
- */
-#include "x86emu.h"
-#include "glue.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define PRINTF(fmt, args...) printf(fmt, ## args)
-#else
-#define PRINTF(fmt, args...)
-#endif
-
-#define BIOS_SEG 0xFFF0
-#define PCIBIOS_SUCCESSFUL 0
-#define PCIBIOS_DEVICE_NOT_FOUND 0x86
-
-typedef unsigned char UBYTE;
-typedef unsigned short UWORD;
-typedef unsigned long ULONG;
-
-typedef char BYTE;
-typedef short WORT;
-typedef long LONG;
-
-static inline UBYTE read_byte(volatile UBYTE* from)
-{
-    int x;
-    asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UBYTE)x;
-}
-
-static inline void write_byte(volatile UBYTE *to, int x)
-{
-    asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline UWORD read_word_little(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from));
-    return (UWORD)x;
-}
-
-static inline UWORD read_word_big(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UWORD)x;
-}
-
-static inline void write_word_little(volatile UWORD *to, int x)
-{
-    asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_word_big(volatile UWORD *to, int x)
-{
-    asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline ULONG read_long_little(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from));
-    return (ULONG)x;
-}
-
-static inline ULONG read_long_big(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (ULONG)x;
-}
-
-static inline void write_long_little(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_long_big(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-#define port_to_mem(from) (0xFE000000|(from))
-#define in_byte(from) read_byte( (UBYTE *)port_to_mem(from))
-#define in_word(from) read_word_little((UWORD *)port_to_mem(from))
-#define in_long(from) read_long_little((ULONG *)port_to_mem(from))
-#define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val)
-#define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val)
-#define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val)
-
-static void X86API undefined_intr(int intno)
-{
-    extern u16 A1_rdw(u32 addr);
-    if (A1_rdw(intno * 4 + 2) == BIOS_SEG)
-    {
-	PRINTF("Undefined interrupt %xh called AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   intno, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-	X86EMU_halt_sys();
-    }
-    else
-    {
-	PRINTF("Calling interrupt %xh, AL=%xh, AH=%xh\n", intno, M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int42(int intno);
-static void X86API int15(int intno);
-
-static void X86API int10(int intno)
-{
-    if (A1_rdw(intno*4+2) == BIOS_SEG)
-	int42(intno);
-    else
-    {
-	PRINTF("int10: branching to %04X:%04X, AL=%xh, AH=%xh\n", A1_rdw(intno*4+2), A1_rdw(intno*4),
-	       M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int1A(int intno)
-{
-    int device;
-
-    switch(M.x86.R_AX)
-    {
-    case 0xB101: /* PCI Bios Present? */
-	M.x86.R_AL  = 0x00;
-	M.x86.R_EDX = 0x20494350;
-	M.x86.R_BX  = 0x0210;
-	M.x86.R_CL  = 3;
-	CLEAR_FLAG(F_CF);
-	break;
-    case 0xB102: /* Find device */
-	device = mypci_find_device(M.x86.R_DX, M.x86.R_CX, M.x86.R_SI);
-	if (device != -1)
-	{
-	    M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	    M.x86.R_BH = mypci_bus(device);
-	    M.x86.R_BL = mypci_devfn(device);
-	}
-	else
-	{
-	    M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB103: /* Find PCI class code */
-	M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	/*printf("Find by class not yet implmented"); */
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB108: /* read config byte */
-	M.x86.R_CL = mypci_read_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_byte %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CL); */
-	break;
-    case 0xB109: /* read config word */
-	M.x86.R_CX = mypci_read_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_word %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10A: /* read config dword */
-	M.x86.R_ECX = mypci_read_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_long %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_ECX); */
-	break;
-    case 0xB10B: /* write config byte */
-	mypci_write_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CL);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_byte %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_CL); */
-	break;
-    case 0xB10C: /* write config word */
-	mypci_write_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_word %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10D: /* write config dword */
-	mypci_write_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_ECX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_long %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_ECX); */
-	break;
-    default:
-	PRINTF("BIOS int %xh: Unknown function AX=%04xh\n", intno, M.x86.R_AX);
-
-    }
-}
-
-void bios_init(void)
-{
-    int i;
-    X86EMU_intrFuncs bios_intr_tab[256];
-
-    for (i=0; i<256; i++)
-    {
-	write_long_little(M.mem_base+i*4, BIOS_SEG<<16);
-	bios_intr_tab[i] = undefined_intr;
-    }
-
-    bios_intr_tab[0x10] = int10;
-    bios_intr_tab[0x1A] = int1A;
-    bios_intr_tab[0x42] = int42;
-    bios_intr_tab[0x15] = int15;
-
-    bios_intr_tab[0x6D] = int42;
-
-    X86EMU_setupIntrFuncs(bios_intr_tab);
-    video_init();
-}
-
-unsigned char setup_40x25[] =
-{
-    0x38, 0x28, 0x2d, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_80x25[] =
-{
-    0x71, 0x50, 0x5a, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_graphics[] =
-{
-    0x38, 0x28, 0x20, 0x0a, 0x7f, 6, 0x64,
-    0x70, 2, 1, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_bw[] =
-{
-    0x61, 0x50, 0x52, 0x0f, 0x19, 6, 0x19,
-    0x19, 2, 0x0d, 0x0b, 0x0c, 0, 0, 0, 0
-};
-
-unsigned char * setup_modes[] =
-{
-    setup_40x25,     /* mode 0: 40x25 bw text */
-    setup_40x25,     /* mode 1: 40x25 col text */
-    setup_80x25,     /* mode 2: 80x25 bw text */
-    setup_80x25,     /* mode 3: 80x25 col text */
-    setup_graphics,  /* mode 4: 320x200 col graphics */
-    setup_graphics,  /* mode 5: 320x200 bw graphics */
-    setup_graphics,  /* mode 6: 640x200 bw graphics */
-    setup_bw         /* mode 7: 80x25 mono text */
-};
-
-unsigned int setup_cols[] =
-{
-    40, 40, 80, 80, 40, 40, 80, 80
-};
-
-unsigned char setup_modesets[] =
-{
-     0x2C, 0x28, 0x2D, 0x29, 0x2A, 0x2E, 0x1E, 0x29
-};
-
-unsigned int setup_bufsize[] =
-{
-    2048, 2048, 4096, 2096, 16384, 16384, 16384, 4096
-};
-
-void bios_set_mode(int mode)
-{
-    int i;
-    unsigned char mode_set = setup_modesets[mode]; /* Control register value */
-    unsigned char *setup_regs = setup_modes[mode]; /* Register 3D4 Array */
-
-    /* Switch video off */
-    out_byte(0x3D8, mode_set & 0x37);
-
-    /* Set up parameters at 3D4h */
-    for (i=0; i<16; i++)
-    {
-	out_byte(0x3D4, (unsigned char)i);
-	out_byte(0x3D5, *setup_regs);
-	setup_regs++;
-    }
-
-    /* Enable video */
-    out_byte(0x3D8, mode_set);
-
-    /* Set overscan */
-    if (mode == 6) out_byte(0x3D9, 0x3F);
-    else           out_byte(0x3D9, 0x30);
-}
-
-static void bios_print_string(void)
-{
-    extern void video_bios_print_string(char *string, int x, int y, int attr, int count);
-    char *s = (char *)(M.x86.R_ES<<4) + M.x86.R_BP;
-    int attr;
-    if (M.x86.R_AL & 0x02) attr = - 1;
-    else                   attr = M.x86.R_BL;
-    video_bios_print_string(s, M.x86.R_DH, M.x86.R_DL, attr, M.x86.R_CX);
-}
-
-static void X86API int42(int intno)
-{
-    switch (M.x86.R_AH)
-    {
-    case 0x00:
-	bios_set_mode(M.x86.R_AL);
-	break;
-    case 0x13:
-	bios_print_string();
-	break;
-    default:
-	PRINTF("Warning: VIDEO BIOS interrupt %xh unimplemented function %xh, AL = %xh\n",
-	       intno, M.x86.R_AH, M.x86.R_AL);
-    }
-}
-
-static void X86API int15(int intno)
-{
-    PRINTF("Called interrupt 15h: AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-}
diff --git a/board/MAI/bios_emulator/glue.c b/board/MAI/bios_emulator/glue.c
deleted file mode 100644
index c0adab423d..0000000000
--- a/board/MAI/bios_emulator/glue.c
+++ /dev/null
@@ -1,511 +0,0 @@
-#include <common.h>
-#include <pci.h>
-#include <74xx_7xx.h>
-
-
-#ifdef DEBUG
-#undef DEBUG
-#endif
-
-#ifdef DEBUG
-#define PRINTF(format, args...) _printf(format , ## args)
-#else
-#define PRINTF(format, argc...)
-#endif
-
-static pci_dev_t to_pci(int bus, int devfn)
-{
-    return PCI_BDF(bus, (devfn>>3), devfn&3);
-}
-
-int mypci_find_device(int vendor, int product, int index)
-{
-    return pci_find_device(vendor, product, index);
-}
-
-int mypci_bus(int device)
-{
-    return PCI_BUS(device);
-}
-
-int mypci_devfn(int device)
-{
-    return (PCI_DEV(device)<<3) | PCI_FUNC(device);
-}
-
-
-#define mypci_read_func(type, size)				\
-type mypci_read_cfg_##size##(int bus, int devfn, int offset)	\
-{								\
-    type c;							\
-    pci_read_config_##size##(to_pci(bus, devfn), offset, &c);	\
-    return c;							\
-}
-
-#define mypci_write_func(type, size)				\
-void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value)	\
-{								\
-    pci_write_config_##size##(to_pci(bus, devfn), offset, value);	\
-}
-
-mypci_read_func(u8,byte);
-mypci_read_func(u16,word);
-
-mypci_write_func(u8,byte);
-mypci_write_func(u16,word);
-
-u32 mypci_read_cfg_long(int bus, int devfn, int offset)
-{
-    u32 c;
-    pci_read_config_dword(to_pci(bus, devfn), offset, &c);
-    return c;
-}
-
-void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
-{
-    pci_write_config_dword(to_pci(bus, devfn), offset, value);
-}
-
-void _printf(const char *fmt, ...)
-{
-    va_list args;
-    char buf[CFG_PBSIZE];
-
-    va_start(args, fmt);
-    (void)vsprintf(buf, fmt, args);
-    va_end(args);
-
-    printf(buf);
-}
-
-char *_getenv(char *name)
-{
-    return getenv(name);
-}
-
-unsigned long get_bar_size(pci_dev_t dev, int offset)
-{
-    u32 bar_back, bar_value;
-
-    /*  Save old BAR value */
-    pci_read_config_dword(dev, offset, &bar_back);
-
-    /*  Write all 1's. */
-    pci_write_config_dword(dev, offset, ~0);
-
-    /*  Now read back the relevant bits */
-    pci_read_config_dword(dev, offset, &bar_value);
-
-    /*  Restore original value */
-    pci_write_config_dword(dev, offset, bar_back);
-
-    if (bar_value == 0) return 0xFFFFFFFF; /*  This BAR is disabled */
-
-    if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
-    {
-	/*  This is a memory space BAR. Mask it out so we get the size of it */
-	return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-    }
-
-    /*  Not suitable */
-    return 0xFFFFFFFF;
-}
-
-void enable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg |= 0x08; */
-    cfg |= 0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void disable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg &= ~0x08; */
-    cfg &= ~0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void map_rom(pci_dev_t dev, u32 address)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
-}
-
-void unmap_rom(pci_dev_t dev)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-}
-
-void bat_map(u8 batnum, u32 address, u32 length)
-{
-    u32 temp = address;
-    address &= 0xFFFE0000;
-    temp    &= 0x0001FFFF;
-    length = (length - 1 ) >> 17;
-    length <<= 2;
-
-    switch (batnum)
-    {
-    case 0:
-	__asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
-	break;
-    case 1:
-	__asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
-	break;
-    case 2:
-	__asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
-	break;
-    case 3:
-	__asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
-	break;
-    }
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
-
-int attempt_map_rom(pci_dev_t dev, void *copy_address)
-{
-    u32 rom_size      = 0;
-    u32 rom_address   = 0;
-    u32 bar_size      = 0;
-    u32 bar_backup    = 0;
-    int i,j;
-    void *image       = 0;
-    u32 image_size    = 0;
-    int did_correct   = 0;
-    u32 prefetch_addr = 0;
-    u32 prefetch_size = 0;
-    u32 prefetch_idx  = 0;
-
-    /*  Get the size of the expansion rom */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
-    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
-    if ((rom_size & 0x01) == 0)
-    {
-	PRINTF("No ROM\n");
-	return 0;
-    }
-
-    rom_size &= 0xFFFFF800;
-    rom_size = (~rom_size)+1;
-
-    PRINTF("ROM Size is %dK\n", rom_size/1024);
-
-    /*
-     * Try to find a place for the ROM. We always attempt to use
-     * one of the card's bases for this, as this will be in any
-     * bridge's resource range as well as being free of conflicts
-     * with other cards. In a graphics card it is very unlikely
-     * that there won't be any base address that is large enough to
-     * hold the rom.
-     *
-     * FIXME: To work around this, theoretically the largest base
-     * could be used if none is found in the loop below.
-     */
-
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	bar_size = get_bar_size(dev, i);
-	PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
-	       (i - PCI_BASE_ADDRESS_0)/4,
-	       bar_size/1024);
-	if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
-	{
-	    PRINTF("Found a match for rom size\n");
-	    pci_read_config_dword(dev, i, &rom_address);
-	    rom_address &= 0xFFFFFFF0;
-	    if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
-	}
-    }
-
-    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
-    {
-	PRINTF("No suitable rom address found\n");
-	return 0;
-    }
-
-    /*  Disable the BAR */
-    pci_read_config_dword(dev, i, &bar_backup);
-    pci_write_config_dword(dev, i, 0);
-
-    /*  Map ROM */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
-
-    /*  Copy the rom to a place in the emulator space */
-    PRINTF("Claiming BAT 2\n");
-    bat_map(2, rom_address, rom_size);
-    /* show_bat_mapping(); */
-
-    if (0 == find_image(rom_address, rom_size, &image, &image_size))
-    {
-	PRINTF("No x86 BIOS image found\n");
-	return 0;
-    }
-
-    PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
-
-    /* memcpy(copy_address, rom_address, rom_size); */
-    {
-	unsigned char *from = (unsigned char *)image; /* rom_address; */
-	unsigned char *to = (unsigned char *)copy_address;
-	for (j=0; j<image_size /*rom_size*/; j++)
-	{
-	    *to++ = *from++;
-	}
-    }
-
-    PRINTF("Copy is done\n");
-
-    /*  Unmap the ROM and restore the BAR */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-    pci_write_config_dword(dev, i, bar_backup);
-
-    /*  FIXME: Shouldn't be needed anymore*/
-    /* bat_map(2, 0x80000000, 256*1024*1024);
-       show_bat_mapping(); */
-
-    /*
-     * Since most cards can probably only do 16 bit IO addressing, we
-     * correct their IO base into an appropriate value.
-     * This should do for most.
-     */
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	unsigned long value;
-	pci_read_config_dword(dev, i, &value);
-	if (value & 0x01) /*  IO */
-	{
-	    did_correct = 1;
-	    pci_write_config_dword(dev, i, 0x1001);
-	    break;
-	}
-
-	if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
-	{
-	    prefetch_idx = i;
-	    prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
-	    prefetch_size = get_bar_size(dev, i);
-	}
-    }
-
-    if (1) /* did_correct) */
-    {
-	extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
-	int busnr = PCI_BUS(dev);
-	if (busnr)
-	{
-	    pci_dev_t bridge;
-	    PRINTF("Need to correct bridge device for IO range change\n");
-	    bridge = pci_find_bridge_for_bus(NULL, busnr);
-	    if (bridge == PCI_ANY_ID)
-	    {
-		PRINTF("Didn't find bridge. Hope that's OK\n");
-	    }
-	    else
-	    {
-		/*
-		 * Set upper I/O base/limit to 0
-		 */
-		pci_write_config_byte(bridge, 0x30, 0x00);
-		pci_write_config_byte(bridge, 0x31, 0x00);
-		pci_write_config_byte(bridge, 0x32, 0x00);
-		pci_write_config_byte(bridge, 0x33, 0x00);
-		if (did_correct)
-		{
-		    /*
-		     * set lower I/O base to 1000
-		     * That is, bits 0:3 are set to 0001 by default.
-		     * bits 7:4 contain I/O address bits 15:12
-		     * all others are assumed 0.
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    /*
-		     * Set lower I/O limit to 1FFF
-		     * That is, bits 0:3 are reserved and always 0000
-		     * Bits 7:4 contain I/O address bits 15:12
-		     * All others are assumed F.
-		     */
-		    pci_write_config_byte(bridge, 0x1D, 0x10);
-		    pci_write_config_byte(bridge, 0x0D, 0x20);
-		    PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-		else
-		{
-		    /*
-		     * This card doesn't have I/O, we disable I/O forwarding
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    pci_write_config_byte(bridge, 0x1D, 0x00);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-		    pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-		    PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-	    }
-	    /*
-	     * Correct the prefetchable memory base, which is not set correctly by
-	     * the U-Boot autoconfig stuff
-	     */
-	    if (prefetch_idx)
-	    {
-/* 		PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
-/* 		       prefetch_addr, prefetch_addr+prefetch_size, */
-/* 		       prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
-	    }
-
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
-
-	    pci_write_config_byte(bridge, 0xD0, 0x0A);
-	    pci_write_config_byte(bridge, 0xD3, 0x04);
-
-	    /*
-	     * Set the interrupt pin to 0
-	     */
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-
-	}
-    }
-
-    /* Finally, enable the card's IO and memory response */
-    pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-    pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-    pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
-
-    return 1;
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
-{
-    int i = 0;
-    unsigned char *rom = (unsigned char *)rom_address;
-    /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
-
-    for (;;)
-    {
-	unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
-	unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
-	unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
-	if (*rom != 0x55 || *(rom+1) != 0xAA)
-	{
-	    PRINTF("Invalid header this is\n");
-	    return 0;
-	}
-	PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
-	       pci_image_type==0 ? "x86" :
-	       pci_image_type==1 ? "OpenFirmware" :
-	       "Unknown");
-	if (pci_image_type == 0)
-	{
-	    *image = rom;
-	    *image_size = pci_image_length;
-	    return 1;
-	}
-
-	if (*(rom+pci_data_offset+0x15) & 0x80)
-	{
-	    PRINTF("LAST image encountered, no image found\n");
-	    return 0;
-	}
-
-	rom += pci_image_length;
-    }
-}
-
-void show_bat_mapping(void)
-{
-    u32 dbat0u, dbat0l, ibat0u, ibat0l;
-    u32 dbat1u, dbat1l, ibat1u, ibat1l;
-    u32 dbat2u, dbat2l, ibat2u, ibat2l;
-    u32 dbat3u, dbat3l, ibat3u, ibat3l;
-    u32 msr, hid0, l2cr_reg;
-
-    __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
-    __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
-    __asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
-    __asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
-
-    __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
-    __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
-    __asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
-    __asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
-
-    __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
-    __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
-    __asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
-    __asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
-
-    __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
-    __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
-    __asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
-    __asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
-
-    __asm volatile ("mfmsr %0"     : "=r" (msr));
-    __asm volatile ("mfspr %0,1008": "=r" (hid0));
-    __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
-
-    printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
-	   dbat0u, dbat0l, ibat0u, ibat0l);
-    printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
-	   dbat1u, dbat1l, ibat1u, ibat1l);
-    printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
-	   dbat2u, dbat2l, ibat2u, ibat2l);
-    printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
-	   dbat3u, dbat3l, ibat3u, ibat3l);
-
-    printf("\nMSR: %08x   HID0: %08x   L2CR: %08x \n", msr,hid0, l2cr_reg);
-}
-
-
-void remove_init_data(void)
-{
-    char *s;
-
-    /*  Invalidate and disable data cache */
-    invalidate_l1_data_cache();
-    dcache_disable();
-
-    s = getenv("x86_cache");
-
-    if (!s)
-    {
-	icache_enable();
-	dcache_enable();
-    }
-    else if (s)
-    {
-	if (strcmp(s, "dcache")==0)
-	{
-	    dcache_enable();
-	}
-	else if (strcmp(s, "icache") == 0)
-	{
-	    icache_enable();
-	}
-	else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
-	{
-	    dcache_enable();
-	    icache_enable();
-	}
-    }
-
-    /*   show_bat_mapping();*/
-}
diff --git a/board/MAI/bios_emulator/glue.h b/board/MAI/bios_emulator/glue.h
deleted file mode 100644
index 585efe1286..0000000000
--- a/board/MAI/bios_emulator/glue.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef GLUE_H
-#define GLUE_H
-
-typedef unsigned int pci_dev_t;
-
-int mypci_find_device(int vendor, int product, int index);
-int mypci_bus(int device);
-int mypci_devfn(int device);
-unsigned long get_bar_size(pci_dev_t dev, int offset);
-
-u8   mypci_read_cfg_byte(int bus, int devfn, int offset);
-u16  mypci_read_cfg_word(int bus, int devfn, int offset);
-u32  mypci_read_cfg_long(int bus, int devfn, int offset);
-
-void mypci_write_cfg_byte(int bus, int devfn, int offset, u8 value);
-void mypci_write_cfg_word(int bus, int devfn, int offset, u16 value);
-void mypci_write_cfg_long(int bus, int devfn, int offset, u32 value);
-
-void _printf(const char *fmt, ...);
-char *_getenv(char *name);
-
-void *malloc(size_t size);
-void memset(void *addr, int value, size_t size);
-void memcpy(void *to, void *from, size_t numbytes);
-int  strcmp(char *, char *);
-
-void enable_compatibility_hole(void);
-void disable_compatibility_hole(void);
-
-void map_rom(pci_dev_t dev, unsigned long address);
-void unmap_rom(pci_dev_t dev);
-int  attempt_map_rom(pci_dev_t dev, void *copy_address);
-
-#define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
-#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
-#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
-#define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fUL)
-
-#define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
-#define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
-#define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
-#define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
-#define PCI_BUS(d)      (((d) >> 16) & 0xff)
-#define PCI_DEV(d)      (((d) >> 11) & 0x1f)
-#define PCI_FUNC(d)     (((d) >> 8) & 0x7)
-#define PCI_BDF(b,d,f)  ((b) << 16 | (d) << 11 | (f) << 8)
-
-#define PCI_ANY_ID (~0)
-#define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
-#define PCI_ROM_ADDRESS_ENABLE 0x01
-
-#define OFF(addr) ((addr) & 0xFFFF)
-#define SEG(addr) (((addr)>>4) &0xF000)
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake b/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
deleted file mode 100755
index 4d6ccb3f46..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
deleted file mode 100755
index d3729496ce..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
deleted file mode 100755
index 6f65d4119a..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
deleted file mode 100755
index 7de503024b..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep b/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
deleted file mode 100755
index 5451b22024..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
deleted file mode 100755
index fbd335261c..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
deleted file mode 100755
index dd14a7ae41..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans b/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
deleted file mode 100755
index a1aea4f4ad..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake b/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
deleted file mode 100755
index f198f29443..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm b/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
deleted file mode 100755
index e312a0b239..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm b/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
deleted file mode 100755
index 9fe81a3a3e..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans b/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
deleted file mode 100755
index e536c0466d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat b/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
deleted file mode 100755
index 776d13820f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
+++ /dev/null
@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 3.1.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC3_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC3.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%BC3_PATH%\BIN;%DEFPATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC3_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 3.1 DOS compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat b/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
deleted file mode 100755
index d2939f458a..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
+++ /dev/null
@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat b/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
deleted file mode 100755
index 246517d103..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit DOS compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat b/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
deleted file mode 100755
index cbb2c79510..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (DPMI32).
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat b/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
deleted file mode 100755
index 14d7c05b14..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 Snap compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat b/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
deleted file mode 100755
index 50bd3cb5d8..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
+++ /dev/null
@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat b/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
deleted file mode 100755
index 4b59fa422e..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows VxD mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32-bit VxD compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat b/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
deleted file mode 100755
index 4d799b47b6..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat b/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
deleted file mode 100755
index a6c199fe9a..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
+++ /dev/null
@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat b/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
deleted file mode 100755
index 6a0fde2c9e..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat b/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
deleted file mode 100755
index 23b50389de..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit DOS compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat b/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
deleted file mode 100755
index 0521f93cec..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
+++ /dev/null
@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (DPMI32).
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat b/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
deleted file mode 100755
index e3241ffae3..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
+++ /dev/null
@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit SMX compilation configuration set up (SMX32).
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat b/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
deleted file mode 100755
index ab3acd23c4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 Snap compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat b/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
deleted file mode 100755
index 4dcc3723be..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
+++ /dev/null
@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat b/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
deleted file mode 100755
index 2356911aba..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows (VxD) compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat b/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
deleted file mode 100755
index cd79d86b8f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
+++ /dev/null
@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat b/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
deleted file mode 100755
index 8b8cec9436..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat b/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
deleted file mode 100755
index ebfeb2eb64..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
deleted file mode 100755
index 6e09428816..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
deleted file mode 100755
index aa13e7dd20..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit DOS compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
deleted file mode 100755
index d0017d4ccb..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
+++ /dev/null
@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (DPMI32).
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
deleted file mode 100755
index 2b969a93ba..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
+++ /dev/null
@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit SMX compilation configuration set up (SMX32).
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
deleted file mode 100755
index d7b8ff20a8..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 Snap compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
deleted file mode 100755
index 1de3601a59..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
+++ /dev/null
@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
deleted file mode 100755
index 28de58c3f0..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows (VxD) compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
deleted file mode 100755
index c30d004081..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
+++ /dev/null
@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
deleted file mode 100755
index 18760e1128..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat b/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
deleted file mode 100755
index 198c1a2425..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/build b/board/MAI/bios_emulator/scitech/bin/build
deleted file mode 100755
index ff1973dc81..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/build
+++ /dev/null
@@ -1,22 +0,0 @@
-#! /bin/sh
-
-if [ $# -lt 1 ] || ( [ "$1" != gcc-linux ] && [ "$1" != qnx4 ] ) ; then
-	echo Usage: $0 compiler_name [DMAKE commands]
-	echo
-	echo Current compilers:
-	echo "  gcc-linux  - GNU C/C++ 2.7 or higher, 32 bit"
-	echo "  qnx4  - Watcom C/C++ 10.6 or higher, 32 bit"
-	exit 1
-fi
-
-unset DBG OPT OPT_SIZE BUILD_DLL IMPORT_DLL FPU CHECKS BETA
-. ${1}.sh
-
-shift
-dmake $* && exit 0
-
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-exit 1
-
diff --git a/board/MAI/bios_emulator/scitech/bin/build.bat b/board/MAI/bios_emulator/scitech/bin/build.bat
deleted file mode 100755
index ee29093631..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/build.bat
+++ /dev/null
@@ -1,4 +0,0 @@
-@echo off
-rem Disable checked build and build release code
-set CHECKED=
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/board/MAI/bios_emulator/scitech/bin/build_db.bat b/board/MAI/bios_emulator/scitech/bin/build_db.bat
deleted file mode 100755
index 2b325293ab..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/build_db.bat
+++ /dev/null
@@ -1,4 +0,0 @@
-@echo off
-rem Enable checked build and build debug code
-set CHECKED=1
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/board/MAI/bios_emulator/scitech/bin/build_it.bat b/board/MAI/bios_emulator/scitech/bin/build_it.bat
deleted file mode 100755
index 5a619b4459..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/build_it.bat
+++ /dev/null
@@ -1,432 +0,0 @@
-@echo off
-rem Generic batch file to build a version of the library. This batch file
-rem assumes that the correct batch files exist to setup the appropriate
-rem compilation environments, and that the DMAKE.EXE program is available
-rem somewhere on the path.
-rem
-rem Builds as release or debug depending on the value of the CHECKED
-rem environment variable.
-
-rem Unset all environment variables that change the compile process
-set DBG=
-set OPT=
-set OPT_SIZE=
-set BUILD_DLL=
-set IMPORT_DLL=
-set FPU=
-set CHECKS=
-set BETA=
-
-if %1==bc31-d16 goto bc31-d16
-if %1==bc45-d16 goto bc45-d16
-if %1==bc45-d32 goto bc45-d32
-if %1==bc45-tnt goto bc45-tnt
-if %1==bc45-w16 goto bc45-w16
-if %1==bc45-w32 goto bc45-w32
-if %1==bc45-c32 goto bc45-c32
-if %1==bc45-vxd goto bc45-vxd
-if %1==bc45-snp goto bc45-snp
-if %1==bc50-d16 goto bc50-d16
-if %1==bc50-d32 goto bc50-d32
-if %1==bc50-tnt goto bc50-tnt
-if %1==bc50-w16 goto bc50-w16
-if %1==bc50-w32 goto bc50-w32
-if %1==bc50-c32 goto bc50-c32
-if %1==bc50-vxd goto bc50-vxd
-if %1==bc50-snp goto bc50-snp
-if %1==gcc2-d32 goto gcc2-d32
-if %1==gcc2-w32 goto gcc2-w32
-if %1==gcc2-c32 goto gcc2-c32
-if %1==gcc2-linux goto gcc2-linux
-if %1==vc40-d16 goto vc40-d16
-if %1==vc40-tnt goto vc40-tnt
-if %1==vc40-w16 goto vc40-w16
-if %1==vc40-w32 goto vc40-w32
-if %1==vc40-c32 goto vc40-c32
-if %1==vc40-drv9x goto vc40-drv9x
-if %1==vc40-drvnt goto vc40-drvnt
-if %1==vc40-rtt goto vc40-rtt
-if %1==vc40-snp goto vc40-snp
-if %1==vc50-d16 goto vc50-d16
-if %1==vc50-tnt goto vc50-tnt
-if %1==vc50-w16 goto vc50-w16
-if %1==vc50-w32 goto vc50-w32
-if %1==vc50-c32 goto vc50-c32
-if %1==vc50-drv9x goto vc50-drv9x
-if %1==vc50-drvnt goto vc50-drvnt
-if %1==vc50-rtt goto vc50-rtt
-if %1==vc50-snp goto vc50-snp
-if %1==vc60-d16 goto vc60-d16
-if %1==vc60-tnt goto vc60-tnt
-if %1==vc60-w16 goto vc60-w16
-if %1==vc60-w32 goto vc60-w32
-if %1==vc60-c32 goto vc60-c32
-if %1==vc60-drv9x goto vc60-drv9x
-if %1==vc60-drvnt goto vc60-drvnt
-if %1==vc60-drvw2k goto vc60-drvw2k
-if %1==vc60-rtt goto vc60-rtt
-if %1==vc60-snp goto vc60-snp
-if %1==wc10ad16 goto wc10ad16
-if %1==wc10ad32 goto wc10ad32
-if %1==wc10atnt goto wc10atnt
-if %1==wc10aw16 goto wc10aw16
-if %1==wc10aw32 goto wc10aw32
-if %1==wc10ac32 goto wc10ac32
-if %1==wc10ao32 goto wc10ao32
-if %1==wc10ap32 goto wc10ap32
-if %1==wc10asnp goto wc10asnp
-if %1==wc10-d16 goto wc10-d16
-if %1==wc10-d32 goto wc10-d32
-if %1==wc10-tnt goto wc10-tnt
-if %1==wc10-w16 goto wc10-w16
-if %1==wc10-w32 goto wc10-w32
-if %1==wc10-c32 goto wc10-c32
-if %1==wc10-o32 goto wc10-o32
-if %1==wc10-p32 goto wc10-p32
-if %1==wc10-snp goto wc10-snp
-if %1==wc11-d16 goto wc11-d16
-if %1==wc11-d32 goto wc11-d32
-if %1==wc11-tnt goto wc11-tnt
-if %1==wc11-w16 goto wc11-w16
-if %1==wc11-w32 goto wc11-w32
-if %1==wc11-c32 goto wc11-c32
-if %1==wc11-o32 goto wc11-o32
-if %1==wc11-p32 goto wc11-p32
-if %1==wc11-snp goto wc11-snp
-
-echo Usage: BUILD 'compiler_name' [DMAKE commands]
-echo.
-echo Where 'compiler_name' is of the form comp-os, where
-echo 'comp' defines the compiler and 'os' defines the OS environment.
-echo For instance 'bc50-w32' is for Borland C++ 5.0 for Win32.
-echo The value of 'comp' can be any of the following:
-echo.
-echo    bc45 - Borland C++ 4.5x
-echo    bc50 - Borland C++ 5.x
-echo    vc40 - Visual C++ 4.x
-echo    vc50 - Visual C++ 5.x
-echo    vc60 - Visual C++ 6.x
-echo    wc10 - Watcom C++ 10.6
-echo    wc11 - Watcom C++ 11.0
-echo    gcc2 - GNU C/C++ 2.9x
-echo.
-echo The value of 'os' can be one of the following:
-echo.
-echo    d16   - 16-bit DOS
-echo    d32   - 32-bit DOS
-echo    w16   - 16-bit Windows GUI mode
-echo    c32   - 32-bit Windows console mode
-echo    w32   - 32-bit Windows GUI mode
-echo    o16   - 16-bit OS/2 console mode
-echo    o32   - 32-bit OS/2 console mode
-echo    p32   - 32-bit OS/2 Presentation Manager
-echo    snp   - 32-bit SciTech Snap application
-echo    linux - 32-bit Linux application
-goto end
-
-rem -------------------------------------------------------------------------
-rem Setup for the specified compiler
-
-:bc31-d16
-call bc31-d16.bat
-goto compileit
-
-:bc45-d16
-call bc45-d16.bat
-goto compileit
-
-:bc45-d32
-call bc45-d32.bat
-goto compileit
-
-:bc45-tnt
-call bc45-tnt.bat
-goto compileit
-
-:bc45-w16
-call bc45-w16.bat
-goto compileit
-
-:bc45-w32
-call bc45-w32.bat
-goto compileit
-
-:bc45-c32
-call bc45-c32.bat
-goto compileit
-
-:bc45-vxd
-call bc45-vxd.bat
-goto compileit
-
-:bc50-d16
-call bc50-d16.bat
-goto compileit
-
-:bc50-d32
-call bc50-d32.bat
-goto compileit
-
-:bc50-tnt
-call bc50-tnt.bat
-goto compileit
-
-:bc50-w16
-call bc50-w16.bat
-goto compileit
-
-:bc50-w32
-call bc50-w32.bat
-goto compileit
-
-:bc50-c32
-call bc50-c32.bat
-goto compileit
-
-:bc50-vxd
-call bc50-vxd.bat
-goto compileit
-
-:gcc2-d32
-call gcc2-d32.bat
-goto compileit
-
-:gcc2-w32
-call gcc2-w32.bat
-goto compileit
-
-:gcc2-c32
-call gcc2-c32.bat
-goto compileit
-
-:gcc2-linux
-call gcc2-linux.bat
-goto compileit
-
-:sc70-d16
-call sc70-d16.bat
-goto compileit
-
-:sc70-w16
-call sc70-w16.bat
-goto compileit
-
-:sc70-tnt
-call sc70-tnt.bat
-goto compileit
-
-:sc70-w32
-call sc70-w32.bat
-goto compileit
-
-:sc70-c32
-call sc70-c32.bat
-goto compileit
-
-:vc40-d16
-call vc40-d16.bat
-goto compileit
-
-:vc40-tnt
-call vc40-tnt.bat
-goto compileit
-
-:vc40-w16
-call vc40-w16.bat
-goto compileit
-
-:vc40-w32
-call vc40-w32.bat
-goto compileit
-
-:vc40-c32
-call vc40-c32.bat
-goto compileit
-
-:vc40-drv9x
-call vc40-drv9x.bat
-goto compileit
-
-:vc40-drvnt
-call vc40-drvnt.bat
-goto compileit
-
-:vc40-rtt
-call vc40-rtt.bat
-goto compileit
-
-:vc50-d16
-call vc50-d16.bat
-goto compileit
-
-:vc50-tnt
-call vc50-tnt.bat
-goto compileit
-
-:vc50-w16
-call vc50-w16.bat
-goto compileit
-
-:vc50-w32
-call vc50-w32.bat
-goto compileit
-
-:vc50-c32
-call vc50-c32.bat
-goto compileit
-
-:vc50-drv9x
-call vc50-drv9x.bat
-goto compileit
-
-:vc50-drvnt
-call vc50-drvnt.bat
-goto compileit
-
-:vc50-rtt
-call vc50-rtt.bat
-goto compileit
-
-:vc60-d16
-call vc60-d16.bat
-goto compileit
-
-:vc60-tnt
-call vc60-tnt.bat
-goto compileit
-
-:vc60-w16
-call vc60-w16.bat
-goto compileit
-
-:vc60-w32
-call vc60-w32.bat
-goto compileit
-
-:vc60-c32
-call vc60-c32.bat
-goto compileit
-
-:vc60-drv9x
-call vc60-drv9x.bat
-goto compileit
-
-:vc60-drvnt
-call vc60-drvnt.bat
-goto compileit
-
-:vc60-drvw2k
-call vc60-drvw2k.bat
-goto compileit
-
-:vc60-rtt
-call vc60-rtt.bat
-goto compileit
-
-:wc10ad16
-call wc10ad16.bat
-goto compileit
-
-:wc10ad32
-call wc10ad32.bat
-goto compileit
-
-:wc10atnt
-call wc10atnt.bat
-goto compileit
-
-:wc10aw16
-call wc10aw16.bat
-goto compileit
-
-:wc10aw32
-call wc10aw32.bat
-goto compileit
-
-:wc10ac32
-call wc10ac32.bat
-goto compileit
-
-:wc10ao32
-call wc10ao32.bat
-goto compileit
-
-:wc10ap32
-call wc10ap32.bat
-goto compileit
-
-:wc10-d16
-call wc10-d16.bat
-goto compileit
-
-:wc10-d32
-call wc10-d32.bat
-goto compileit
-
-:wc10-tnt
-call wc10-tnt.bat
-goto compileit
-
-:wc10-w16
-call wc10-w16.bat
-goto compileit
-
-:wc10-w32
-call wc10-w32.bat
-goto compileit
-
-:wc10-c32
-call wc10-c32.bat
-goto compileit
-
-:wc10-o32
-call wc10-o32.bat
-goto compileit
-
-:wc10-p32
-call wc10-p32.bat
-goto compileit
-
-:wc11-d16
-call wc11-d16.bat
-goto compileit
-
-:wc11-d32
-call wc11-d32.bat
-goto compileit
-
-:wc11-tnt
-call wc11-tnt.bat
-goto compileit
-
-:wc11-w16
-call wc11-w16.bat
-goto compileit
-
-:wc11-w32
-call wc11-w32.bat
-goto compileit
-
-:wc11-c32
-call wc11-c32.bat
-goto compileit
-
-:wc11-o32
-call wc11-o32.bat
-goto compileit
-
-:wc11-p32
-call wc11-p32.bat
-goto compileit
-
-:compileit
-k_rm -f *.lib *.a
-dmake %2 %3 %4 %5 %6 %7 %8 %9
-if errorlevel 1 goto errorend
-goto end
-
-:errorend
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-:end
diff --git a/board/MAI/bios_emulator/scitech/bin/cddrv.bat b/board/MAI/bios_emulator/scitech/bin/cddrv.bat
deleted file mode 100755
index b64f4d7463..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/cddrv.bat
+++ /dev/null
@@ -1,6 +0,0 @@
-@echo off
-%1
-cd %3
-%4 %5 %6 %7 %8 %9
-%2
-
diff --git a/board/MAI/bios_emulator/scitech/bin/cdit b/board/MAI/bios_emulator/scitech/bin/cdit
deleted file mode 100755
index b22023d54c..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/cdit
+++ /dev/null
@@ -1,10 +0,0 @@
-#! /bin/sh
-
-cd $1
-PROG=$2
-shift 2
-rm -f *.lib *.a
-$PROG $*
-RET=$?
-cd ..
-exit $RET
diff --git a/board/MAI/bios_emulator/scitech/bin/cdit.bat b/board/MAI/bios_emulator/scitech/bin/cdit.bat
deleted file mode 100755
index 950b648071..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/cdit.bat
+++ /dev/null
@@ -1,5 +0,0 @@
-@echo off
-cd %1
-k_rm -f *.lib *.a
-shift 1
-%1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/board/MAI/bios_emulator/scitech/bin/djgpp.env b/board/MAI/bios_emulator/scitech/bin/djgpp.env
deleted file mode 100644
index 5a2c3d816a..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/djgpp.env
+++ /dev/null
@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/release/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
diff --git a/board/MAI/bios_emulator/scitech/bin/djgpp_db.env b/board/MAI/bios_emulator/scitech/bin/djgpp_db.env
deleted file mode 100644
index 9b792c93e4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/djgpp_db.env
+++ /dev/null
@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/debug/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
diff --git a/board/MAI/bios_emulator/scitech/bin/findint3.bat b/board/MAI/bios_emulator/scitech/bin/findint3.bat
deleted file mode 100755
index 2e1506c2ce..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/findint3.bat
+++ /dev/null
@@ -1 +0,0 @@
-perl c:\scitech\src\perl\findint3.per
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh b/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
deleted file mode 100755
index 61ffd93507..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for BeOS
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_beos.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=0
-export USE_BEOS=1
-
-echo GCC BeOS console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh b/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
deleted file mode 100755
index 3816a5dca7..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for FreeBSD
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_freebsd.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=1
-export USE_FREEBSD=1
-
-echo GCC FreeBSD console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh b/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
deleted file mode 100755
index 27a4c49065..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for Linux
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_linux.mk
-export INCLUDE="include;$SCITECH/include;$PRIVATE/include"
-export USE_LINUX=1
-
-if [ "x$LIBC" = x ]; then
-	echo "GCC Linux console compilation environment set up (glib)"
-else
-	echo "GCC Linux console compilation environment set up (libc5)"
-fi
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat b/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
deleted file mode 100755
index 13c4783699..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 console compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat b/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
deleted file mode 100755
index 97cb8bda13..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
+++ /dev/null
@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with DJGPP 2.02
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP.ENV %DJ_PATH%\DJGPP.ENV
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP_DB.ENV %DJ_PATH%\DJGPP.ENV
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set DJGPP=%DJ_PATH%\DJGPP.ENV
-set INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%DJ_PATH%\INCLUDE;
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\DJ32.MK
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set DJ_LIBBASE=dj2
-PATH %SCITECH_BIN%;%DJ_PATH%\BIN;%DEFPATH%
-
-echo DJGPP 2.02 32-bit DOS compilation environment set up (DPMI).
-
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat b/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
deleted file mode 100755
index ceb2ab84e9..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C cross-compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\gcc_linux.mk
-set MAKE_MODE=UNIX
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\cross-linux\i386-redhat-linux\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Linux console cross compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat b/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
deleted file mode 100755
index bdb31aaf5d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=1
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 GUI compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/makelib.bat b/board/MAI/bios_emulator/scitech/bin/makelib.bat
deleted file mode 100755
index 631673483c..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/makelib.bat
+++ /dev/null
@@ -1,97 +0,0 @@
-call wc11-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc11-w32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc10-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd \private\src\graphics\drivers
diff --git a/board/MAI/bios_emulator/scitech/bin/meltobjs.sh b/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
deleted file mode 100755
index fd1804b70f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#! /bin/sh
-#
-# This script generates a single object file from a set of libraries (*.a files)
-# Usage: meltobjs.sh target.o library1.a library2.a ...
-#
-# (C) SciTech Software, Inc. 1998
-#
-
-TMPDIR=/tmp/melt$$
-TARGET=$1
-TARGETDIR=$PWD
-shift
-mkdir $TMPDIR
-
-cd $TMPDIR
-
-for a in $*
-do
-    ar x $a
-done
-ld -r -o $TARGETDIR/$TARGET *.o
-
-rm -fr $TMPDIR
\ No newline at end of file
diff --git a/board/MAI/bios_emulator/scitech/bin/ntddk.bat b/board/MAI/bios_emulator/scitech/bin/ntddk.bat
deleted file mode 100755
index 07c0d78505..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/ntddk.bat
+++ /dev/null
@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\RELEASE\NTDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\DEBUG\NTDRV\VC6;%MSVCDir%\LIB;.
-
-:done
diff --git a/board/MAI/bios_emulator/scitech/bin/qnx4.sh b/board/MAI/bios_emulator/scitech/bin/qnx4.sh
deleted file mode 100755
index 843c4d9fb3..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/qnx4.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX4
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnx4.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/include"
-export USE_QNX=1
-export USE_QNX4=1
-export WC_LIBBASE=wc10
-
-echo Qnx 4 console compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/qnxnto.sh b/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
deleted file mode 100755
index c114f9e337..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX Neutrino
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-if [ X$GCC_PATH = "X" ]; then
-	export GCC_PATH=/usr/gcc/bin
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnxnto.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/nto/include"
-export USE_BIOS=1	# VBIOS lib is tiny under Neutrino, always include it
-export USE_QNX=1
-export USE_QNXNTO=1
-
-echo Qnx Neutrino console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh b/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
deleted file mode 100755
index 0a272d6a46..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#! /bin/sh
-
-# BeOS VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal BeOS installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/boot/develop/tools/gnupro/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-beos:$PATH
-#if [ "x$LIBC" = x ]; then
-#	export PATH=$PATH:$SCITECH/bin-beos/glibc
-#else
-#	export PATH=$PATH:$SCITECH/bin-beos/libc
-#fi
diff --git a/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh b/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
deleted file mode 100755
index c920748a7f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-freebsd:$PATH
diff --git a/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh b/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
deleted file mode 100755
index 35cbf1dc16..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-export TEMP=/tmp TMP=/tmp
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-linux:$PATH
-if [ "x$LIBC" = x ]; then
-	export PATH=$SCITECH/bin-linux/glibc:$PATH
-else
-	export PATH=$SCITECH/bin-linux/libc:$PATH
-fi
diff --git a/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh b/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
deleted file mode 100755
index 1d73109ea4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# QNX 4 VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export WC10_PATH=/usr/watcom/10.6/usr
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-qnx:$PATH
diff --git a/board/MAI/bios_emulator/scitech/bin/set-vars.bat b/board/MAI/bios_emulator/scitech/bin/set-vars.bat
deleted file mode 100755
index 2a2101d4b4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/set-vars.bat
+++ /dev/null
@@ -1,110 +0,0 @@
-@echo off
-REM:=========================================================================
-REM: Master batch file to set up all necessary environment variables for
-REM: the SciTech makefile utilities. This batch file should be executed
-REM: *first* before any other batch files when you start a command shell.
-REM: You should not need to modify any batch files except this one to
-REM: configure the makefile utilities.
-REM:=========================================================================
-
-REM: Set the place where SciTech Software is installed, and where each
-REM: of the supported compilers is installed. These environment variables
-REM: are used by the batch files in the SCITECH\BIN directory.
-REM:
-REM: Modify the as appropriate for your compiler configuration (you should
-REM: only need to change things in this batch file).
-REM:
-REM: This version is for a normal MSDOS installation.
-
-REM: The SCITECH variable points to where batch files, makefile startups,
-REM: include files and source files will be found when compiling.
-
-SET SCITECH=c:\scitech
-
-REM: The SCITECH_LIB variable points to where the SciTech libraries live
-REM: for installation and linking. This allows you to have the source and
-REM: include files on local machines for compiling and have the libraries
-REM: located on a common network machine (for network builds).
-
-SET SCITECH_LIB=%SCITECH%
-
-REM: The PRIVATE variable points to where private source files reside that
-REM: do not live in the public source tree
-
-SET PRIVATE=c:\private
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. We select either DOS hosted
-REM: tools or Win32 hosted tools depending on whether you are running
-REM: on NT or not. Windows 9x users can use the Win32 hosted tools but
-REM: they run slower, but you will have long filenames if you do this.
-
-IF .%OS%==.Windows_NT goto Win32_path
-IF NOT .%WINDIR%==. goto Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-dos
-goto path_set
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. This version uses the Win32
-REM: hosted tools by default, so you can use long filenames.
-
-:Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-win32
-
-:path_set
-
-REM: Set the TMP variable for dmake if this is not already set
-
-SET TMP=%SCITECH%
-
-REM: Set the following environment variable to use the Netwide Assembler
-REM: (NASM) provided with the MGL tools to build all assembler modules.
-REM: If you have Turbo Assembler 4.0 or later and you wish to use it,
-REM: you can use it by removing the following line.
-
-SET USE_NASM=1
-
-REM: The following is used to set up DDK directories for device driver
-REM: development. They can safely be ignored unless you are using the
-REM: SciTech makefile utilities to build device drivers.
-
-SET DDKDRIVE=c:
-SET MSSDK=c:\c\win32sdk
-SET W95_DDKROOT=c:\c\95ddk
-SET W98_DDKROOT=c:\c\98ddk
-SET NT_DDKROOT=c:\c\ntddk
-SET W2K_DDKROOT=c:\c\2000ddk
-SET MASM_ROOT=c:\c\masm611
-SET VTOOLSD=c:\c\vtd95
-SET SOFTICE_PATH=c:\c\sint
-
-REM: The following define the locations of all the compilers that you may
-REM: be using. Change them to reflect where you have installed your
-REM: compilers.
-
-SET BC3_PATH=c:\c\bc3
-SET BC4_PATH=c:\c\bc45
-SET BC5_PATH=c:\c\bc50
-SET BCB5_PATH=c:\c\bcb50
-SET VC_PATH=c:\c\msvc
-SET VC4_PATH=c:\c\vc42
-SET VC5_PATH=c:\c\vc50
-SET VC6_PATH=c:\c\vc60
-SET SC70_PATH=c:\c\sc75
-SET WC10A_PATH=c:\c\wc10a
-SET WC10_PATH=c:\c\wc10
-SET WC11_PATH=c:\c\wc11
-SET TNT_PATH=c:\c\tnt
-SET DJ_PATH=c:\c\djgpp
-SET GCC2_PATH=c:\unix\usr
-
-REM: The following define the locations of the IDE and compiler path
-REM: tools for Visual C++. If you do a standard installation, you wont
-REM: need to change this. If however you did a custom install and changed
-REM: the paths to these directory, you will need to modify this to suit.
-
-SET VC5_MSDevDir=%VC5_PATH%\sharedide
-SET VC5_MSVCDir=%VC5_PATH%\vc
-SET VC6_MSDevDir=%VC6_PATH%\common\msdev98
-SET VC6_MSVCDir=%VC6_PATH%\vc98
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat b/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
deleted file mode 100755
index 71f7d8e10d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
+++ /dev/null
@@ -1,36 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat b/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
deleted file mode 100755
index 9817493e37..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
+++ /dev/null
@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 DOS bit compilation environment set up.
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-drv9x.bat b/board/MAI/bios_emulator/scitech/bin/vc40-drv9x.bat
deleted file mode 100755
index 62e35214e9..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-drv9x.bat
+++ /dev/null
@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development
-call vc40-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC4_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows 9x driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-drvnt.bat b/board/MAI/bios_emulator/scitech/bin/vc40-drvnt.bat
deleted file mode 100755
index 83b67802df..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-drvnt.bat
+++ /dev/null
@@ -1,18 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc40-c32.bat sdk > NUL
-
-REM: Extra stuff to set up for Windows NT DDK development
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%NT_DDKROOT%\bin;%PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows NT driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-snp.bat b/board/MAI/bios_emulator/scitech/bin/vc40-snp.bat
deleted file mode 100755
index 7997044f82..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-snp.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 4.2 Snap compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-tnt.bat b/board/MAI/bios_emulator/scitech/bin/vc40-tnt.bat
deleted file mode 100755
index b0fc93675b..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-tnt.bat
+++ /dev/null
@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 4.2 32-bit DOS compilation environment set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-w16.bat b/board/MAI/bios_emulator/scitech/bin/vc40-w16.bat
deleted file mode 100755
index 2849a20e75..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-w16.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET VC_LIBBASE=VC4
-SET USE_RTTARGET=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 bit Windows compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-w32.bat b/board/MAI/bios_emulator/scitech/bin/vc40-w32.bat
deleted file mode 100755
index d93a6246e3..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-w32.bat
+++ /dev/null
@@ -1,37 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc40-x11.bat b/board/MAI/bios_emulator/scitech/bin/vc40-x11.bat
deleted file mode 100755
index a420a54eab..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc40-x11.bat
+++ /dev/null
@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-SET LIB=%VC4_PATH%\LIB;.
-SET TOOLROOTDIR=%VC4_PATH%
-SET INCLUDE=\xc\include;%VC4_PATH%\INCLUDE
-SET INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%DEFPATH%
-
-echo Visual C++ 4.2 X11 compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-c32.bat b/board/MAI/bios_emulator/scitech/bin/vc50-c32.bat
deleted file mode 100755
index 62d27b9bc7..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-c32.bat
+++ /dev/null
@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-d16.bat b/board/MAI/bios_emulator/scitech/bin/vc50-d16.bat
deleted file mode 100755
index c789c5037d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-d16.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-drv9x.bat b/board/MAI/bios_emulator/scitech/bin/vc50-drv9x.bat
deleted file mode 100755
index 27a4a1439f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-drv9x.bat
+++ /dev/null
@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-drvnt.bat b/board/MAI/bios_emulator/scitech/bin/vc50-drvnt.bat
deleted file mode 100755
index 17b2f25cc7..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-drvnt.bat
+++ /dev/null
@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-rtt.bat b/board/MAI/bios_emulator/scitech/bin/vc50-rtt.bat
deleted file mode 100755
index afb2fb186a..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-rtt.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=1
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 RTTarget-32 compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-snp.bat b/board/MAI/bios_emulator/scitech/bin/vc50-snp.bat
deleted file mode 100755
index 22d2e13c26..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-snp.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off REM Setup environment variables for Visual C++ 5.0 32 bit
-edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 Snap compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-tnt.bat b/board/MAI/bios_emulator/scitech/bin/vc50-tnt.bat
deleted file mode 100755
index 6b09199054..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-tnt.bat
+++ /dev/null
@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 5.0 32-bit compilation environment set up (with TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-w16.bat b/board/MAI/bios_emulator/scitech/bin/vc50-w16.bat
deleted file mode 100755
index 52ab495a3b..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-w16.bat
+++ /dev/null
@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-w32.bat b/board/MAI/bios_emulator/scitech/bin/vc50-w32.bat
deleted file mode 100755
index 07bc5e51df..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-w32.bat
+++ /dev/null
@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc50-x11.bat b/board/MAI/bios_emulator/scitech/bin/vc50-x11.bat
deleted file mode 100755
index fe286bd95d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc50-x11.bat
+++ /dev/null
@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET LIB=%VC5_PATH%\VC\LIB;.
-SET TOOLROOTDIR=%VC5_PATH%\VC
-SET INCLUDE=\xc\include;%VC5_PATH%\VC\INCLUDE
-SET INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%DEFPATH%
-
-echo Visual C++ 5.0 X11 compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-c32.bat b/board/MAI/bios_emulator/scitech/bin/vc60-c32.bat
deleted file mode 100755
index e98417d613..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-c32.bat
+++ /dev/null
@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-d16.bat b/board/MAI/bios_emulator/scitech/bin/vc60-d16.bat
deleted file mode 100755
index 10855e06cb..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-d16.bat
+++ /dev/null
@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-drv9x.bat b/board/MAI/bios_emulator/scitech/bin/vc60-drv9x.bat
deleted file mode 100755
index 27a4a1439f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-drv9x.bat
+++ /dev/null
@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-drvnt.bat b/board/MAI/bios_emulator/scitech/bin/vc60-drvnt.bat
deleted file mode 100755
index 17b2f25cc7..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-drvnt.bat
+++ /dev/null
@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-drvw2k.bat b/board/MAI/bios_emulator/scitech/bin/vc60-drvw2k.bat
deleted file mode 100755
index f304293270..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-drvw2k.bat
+++ /dev/null
@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call w2kddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows Windows 2000 driver compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-snp.bat b/board/MAI/bios_emulator/scitech/bin/vc60-snp.bat
deleted file mode 100755
index 5348ef9521..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-snp.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 6.0 Snap compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-tnt.bat b/board/MAI/bios_emulator/scitech/bin/vc60-tnt.bat
deleted file mode 100755
index 1d8b5e3038..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-tnt.bat
+++ /dev/null
@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC6_PATH%\VC98
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC6_PATH%\VC98\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6 PATH
-%SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 6.0 32-bit compilation environment set up (with TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-w16.bat b/board/MAI/bios_emulator/scitech/bin/vc60-w16.bat
deleted file mode 100755
index 70175c37ab..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-w16.bat
+++ /dev/null
@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-w32.bat b/board/MAI/bios_emulator/scitech/bin/vc60-w32.bat
deleted file mode 100755
index 2f8e7ab9b8..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-w32.bat
+++ /dev/null
@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/vc60-x11.bat b/board/MAI/bios_emulator/scitech/bin/vc60-x11.bat
deleted file mode 100755
index 57b23d2048..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/vc60-x11.bat
+++ /dev/null
@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET LIB=%VC6_PATH%\VC98\LIB;.
-SET TOOLROOTDIR=%VC6_PATH%\VC98
-SET INCLUDE=\xc\include;%VC6_PATH%\VC98\INCLUDE;
-SET INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%DEFPATH%
-
-echo Visual C++ 6.0 X11 compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/w2kddk.bat b/board/MAI/bios_emulator/scitech/bin/w2kddk.bat
deleted file mode 100755
index 92858d162e..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/w2kddk.bat
+++ /dev/null
@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=1
-SET BASEDIR=%W2K_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%BASEDIR%\inc\ddk;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\libfre\i386;%SCITECH_LIB%\LIB\RELEASE\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\libchk\i386;%SCITECH_LIB%\LIB\DEBUG\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-:done
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-c32.bat b/board/MAI/bios_emulator/scitech/bin/wc10-c32.bat
deleted file mode 100755
index 2d738f376f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-c32.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Win32 console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-d16.bat b/board/MAI/bios_emulator/scitech/bin/wc10-d16.bat
deleted file mode 100755
index 5c53a90a17..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-d16.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\WC10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\WC10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\WIN;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit DOS compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-d32.bat b/board/MAI/bios_emulator/scitech/bin/wc10-d32.bat
deleted file mode 100755
index a5c7210526..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-d32.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit DOS compilation environment set up (DOS4GW)
-
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-o16.bat b/board/MAI/bios_emulator/scitech/bin/wc10-o16.bat
deleted file mode 100755
index 579dece3b0..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-o16.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 16-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os216\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os216\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc16.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=1
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit OS/2 compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-o32.bat b/board/MAI/bios_emulator/scitech/bin/wc10-o32.bat
deleted file mode 100755
index 3404b42a01..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-o32.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit OS/2 console compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-p32.bat b/board/MAI/bios_emulator/scitech/bin/wc10-p32.bat
deleted file mode 100755
index 57057de361..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-p32.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=1
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit OS/2 GUI compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-qnx.bat b/board/MAI/bios_emulator/scitech/bin/wc10-qnx.bat
deleted file mode 100755
index 46f8659ce6..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-qnx.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (QNX 4)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\QNX4\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\QNX;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\QNX4\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\QNX;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\QH;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=1
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit QNX compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-snp.bat b/board/MAI/bios_emulator/scitech/bin/wc10-snp.bat
deleted file mode 100755
index 1fde624f1f..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-snp.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=1
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Snap compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-tnt.bat b/board/MAI/bios_emulator/scitech/bin/wc10-tnt.bat
deleted file mode 100755
index d12f042fa1..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-tnt.bat
+++ /dev/null
@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;%TNT_PATH%\INCLUDE
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=1
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=1
-
-echo Watcom C/C++ 10.6 32-bit DOS compilation environment set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-w16.bat b/board/MAI/bios_emulator/scitech/bin/wc10-w16.bat
deleted file mode 100755
index e8ba871bb9..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-w16.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 16 bit Windows mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\WC10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\WC10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\WIN;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit Windows compilation environment set up.
-
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-w32.bat b/board/MAI/bios_emulator/scitech/bin/wc10-w32.bat
deleted file mode 100755
index 839bdde9c0..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-w32.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Win32 GUI compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10-x11.bat b/board/MAI/bios_emulator/scitech/bin/wc10-x11.bat
deleted file mode 100755
index fc783d8143..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10-x11.bat
+++ /dev/null
@@ -1,24 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-SET LIB=%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 X11 compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ac32.bat b/board/MAI/bios_emulator/scitech/bin/wc10ac32.bat
deleted file mode 100755
index 6e0c24d5e7..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ac32.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;%WC10A_PATH%\H\NT;
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a Win32 console compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ad16.bat b/board/MAI/bios_emulator/scitech/bin/wc10ad16.bat
deleted file mode 100755
index f9ecb67273..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ad16.bat
+++ /dev/null
@@ -1,29 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\WC10A;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\WC10A;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;%WC10A_PATH%\H\WIN;
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-SET EDPATH=%WC10A_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 16-bit DOS compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ad32.bat b/board/MAI/bios_emulator/scitech/bin/wc10ad32.bat
deleted file mode 100755
index d52b79a82c..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ad32.bat
+++ /dev/null
@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\DOS;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\DOS;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 32-bit DOS compilation environment set up (DOS4GW)
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ao16.bat b/board/MAI/bios_emulator/scitech/bin/wc10ao16.bat
deleted file mode 100755
index ba7351d0d8..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ao16.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 16-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os216\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os216\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10A_PATH%\h\os2;%WC10A_PATH%\h
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc16.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=1
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10A_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 16-bit OS/2 compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ao32.bat b/board/MAI/bios_emulator/scitech/bin/wc10ao32.bat
deleted file mode 100755
index f3caa59591..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ao32.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10AA_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10AA_PATH%\h\os2;%WC10AA_PATH%\h
-SET WATCOM=%WC10AA_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-SET EDPATH=%WC10AA_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10AA_PATH%\BINNT;%WC10AA6_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 32-bit OS/2 console compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10ap32.bat b/board/MAI/bios_emulator/scitech/bin/wc10ap32.bat
deleted file mode 100755
index 8d21c62eac..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10ap32.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=1
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 32-bit OS/2 GUI compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10asnp.bat b/board/MAI/bios_emulator/scitech/bin/wc10asnp.bat
deleted file mode 100755
index 28f857c80d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10asnp.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=1
-SET WC_LIBBASE=WC10A
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a Snap compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10atnt.bat b/board/MAI/bios_emulator/scitech/bin/wc10atnt.bat
deleted file mode 100755
index a2b32193e4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10atnt.bat
+++ /dev/null
@@ -1,45 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;%WC10A_PATH%\H\NT;%TNT_PATH%\INCLUDE
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=1
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=1
-
-echo Watcom C/C++ 10.0a 32-bit DOS compilation environment set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10aw16.bat b/board/MAI/bios_emulator/scitech/bin/wc10aw16.bat
deleted file mode 100755
index 94011cc337..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10aw16.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 16 bit Windows mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\WC10A;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\WC10A;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;%WC10A_PATH%\H\WIN;
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-SET EDPATH=%WC10A_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a 16-bit Windows compilation environment set up.
-
diff --git a/board/MAI/bios_emulator/scitech/bin/wc10aw32.bat b/board/MAI/bios_emulator/scitech/bin/wc10aw32.bat
deleted file mode 100755
index 1e14dbc9f2..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc10aw32.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.0a in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10A;%WC10A_PATH%\LIB386;%WC10A_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10A_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10A_PATH%\H;%WC10A_PATH%\H\NT;
-SET WATCOM=%WC10A_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET WC_LIBBASE=WC10A
-PATH %SCITECH_BIN%;%WC10A_PATH%\BINNT;%WC10A_PATH%\BINB;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.0a Win32 GUI compilation environment set up
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-c32.bat b/board/MAI/bios_emulator/scitech/bin/wc11-c32.bat
deleted file mode 100755
index e75312927c..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-c32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET C_INCLUDE=%WC11_PATH%\H;%WC11_PATH%\H\NT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Watcom C/C++ 11.0 Win32 console compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-d16.bat b/board/MAI/bios_emulator/scitech/bin/wc11-d16.bat
deleted file mode 100755
index 4338adaef9..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-d16.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-REM SETup for compiling with Watcom C/C++ 11.0 in 16 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\WC11;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\WC11;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;%WC11_PATH%\H\WIN;
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-SET EDPATH=%WC11_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 16-bit DOS compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-d32.bat b/board/MAI/bios_emulator/scitech/bin/wc11-d32.bat
deleted file mode 100755
index e5a54d4bb4..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-d32.bat
+++ /dev/null
@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 32-bit DOS compilation environment set up (DOS4GW).
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-o16.bat b/board/MAI/bios_emulator/scitech/bin/wc11-o16.bat
deleted file mode 100755
index d46754a3c0..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-o16.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 16-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os216\wc11;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os216\wc11;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC11_PATH%\h\os2;%WC11_PATH%\h
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc16.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=1
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc11
-SET EDPATH=%WC11_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 16-bit OS/2 compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-o32.bat b/board/MAI/bios_emulator/scitech/bin/wc11-o32.bat
deleted file mode 100755
index 37f5dc7617..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-o32.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc11;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc11;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC11_PATH%\h\os2;%WC11_PATH%\h
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc11
-SET EDPATH=%WC11_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 32-bit OS/2 console compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-p32.bat b/board/MAI/bios_emulator/scitech/bin/wc11-p32.bat
deleted file mode 100755
index 348cbbda81..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-p32.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc11;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc11;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC11_PATH%\h\os2;%WC11_PATH%\h
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=1
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc11
-SET EDPATH=%WC11_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 32-bit OS/2 GUI compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-qnx.bat b/board/MAI/bios_emulator/scitech/bin/wc11-qnx.bat
deleted file mode 100755
index 1fd60feea8..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-qnx.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode (QNX 4)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\QNX4\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\QNX;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\QNX4\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\QNX;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\QH;
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=1
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 32-bit QNX compilation environment set up
-
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-snp.bat b/board/MAI/bios_emulator/scitech/bin/wc11-snp.bat
deleted file mode 100755
index 6d2ac5783d..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-snp.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=1
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 Snap compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-tnt.bat b/board/MAI/bios_emulator/scitech/bin/wc11-tnt.bat
deleted file mode 100755
index 44dbf24847..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-tnt.bat
+++ /dev/null
@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;%WC11_PATH%\H\NT;%TNT_PATH%\INCLUDE
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=1
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=1
-
-echo Watcom C/C++ 11.0 32-bit DOS compilation environment set up (TNT).
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-w16.bat b/board/MAI/bios_emulator/scitech/bin/wc11-w16.bat
deleted file mode 100755
index e65c70e178..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-w16.bat
+++ /dev/null
@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 16 bit Windows mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\WC11;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\WC11;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;%WC11_PATH%\H\WIN;
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-SET EDPATH=%WC11_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 16-bit Windows compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-w32.bat b/board/MAI/bios_emulator/scitech/bin/wc11-w32.bat
deleted file mode 100755
index 764cdbd111..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-w32.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET C_INCLUDE=%WC11_PATH%\H;%WC11_PATH%\H\NT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Watcom C/C++ 11.0 Win32 GUI compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/wc11-x11.bat b/board/MAI/bios_emulator/scitech/bin/wc11-x11.bat
deleted file mode 100755
index c2569a3eb9..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/wc11-x11.bat
+++ /dev/null
@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC11_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;%WC11_PATH%\H\NT;
-SET WATCOM=%WC11_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC11
-PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 11.0 Win32 GUI compilation environment set up.
diff --git a/board/MAI/bios_emulator/scitech/bin/win32sdk.bat b/board/MAI/bios_emulator/scitech/bin/win32sdk.bat
deleted file mode 100755
index 3c7f017cb5..0000000000
--- a/board/MAI/bios_emulator/scitech/bin/win32sdk.bat
+++ /dev/null
@@ -1,20 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Platform SDK development
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET MSTOOLS=%MSSDK%
-SET DXSDKROOT=%MSTOOLS%
-SET INETSDK=%MSTOOLS%
-SET BKOFFICE=%MSTOOLS%
-SET BASEMAKE=%BKOFFICE%\INCLUDE\BKOffice.Mak
-SET INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%MSTOOLS%\INCLUDE;%C_INCLUDE%
-if .%1%==.borland goto borland
-SET LIB=%MSTOOLS%\LIB;%LIB%
-goto notborland
-:borland
-SET LIB=%MSTOOLS%\LIB\BORLAND;%LIB%
-:notborland
-SET PATH=%MSTOOLS%\Bin\;%MSTOOLS%\Bin\WinNT;%PATH%
-SET CPU=i386
-
-echo Microsoft Platform SDK support enbabled.
diff --git a/board/MAI/bios_emulator/scitech/include/biosemu.h b/board/MAI/bios_emulator/scitech/include/biosemu.h
deleted file mode 100644
index 82c33a7c1d..0000000000
--- a/board/MAI/bios_emulator/scitech/include/biosemu.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for the real mode x86 BIOS emulator, which is
-*               used to warmboot any number of VGA compatible PCI/AGP
-*               controllers under any OS, on any processor family that
-*               supports PCI. We also allow the user application to call
-*               real mode BIOS functions and Int 10h functions (including
-*               the VESA BIOS).
-*
-****************************************************************************/
-
-#ifndef __BIOSEMU_H
-#define __BIOSEMU_H
-
-#include "x86emu.h"
-#include "pmapi.h"
-#include "pcilib.h"
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/****************************************************************************
-REMARKS:
-Data structure used to describe the details specific to a particular VGA
-controller. This information is used to allow the VGA controller to be
-swapped on the fly within the BIOS emulator.
-
-HEADER:
-biosemu.h
-
-MEMBERS:
-pciInfo         - PCI device information block for the controller
-BIOSImage       - Pointer to a read/write copy of the BIOS image
-BIOSImageLen    - Length of the BIOS image
-LowMem          - Copy of key low memory areas
-****************************************************************************/
-typedef struct {
-    PCIDeviceInfo   *pciInfo;
-    void            *BIOSImage;
-    ulong           BIOSImageLen;
-    uchar           LowMem[1536];
-    } BE_VGAInfo;
-
-/****************************************************************************
-REMARKS:
-Data structure used to describe the details for the BIOS emulator system
-environment as used by the X86 emulator library.
-
-HEADER:
-biosemu.h
-
-MEMBERS:
-vgaInfo         - VGA BIOS information structure
-biosmem_base    - Base of the BIOS image
-biosmem_limit   - Limit of the BIOS image
-busmem_base     - Base of the VGA bus memory
-****************************************************************************/
-typedef struct {
-    BE_VGAInfo      vgaInfo;
-    ulong           biosmem_base;
-    ulong           biosmem_limit;
-    ulong           busmem_base;
-    } BE_sysEnv;
-
-/****************************************************************************
-REMARKS:
-Structure defining all the BIOS Emulator API functions as exported from
-the Binary Portable DLL.
-{secret}
-****************************************************************************/
-typedef struct {
-    ulong   dwSize;
-    ibool   (PMAPIP BE_init)(u32 debugFlags,int memSize,BE_VGAInfo *info);
-    void    (PMAPIP BE_setVGA)(BE_VGAInfo *info);
-    void    (PMAPIP BE_getVGA)(BE_VGAInfo *info);
-    void *  (PMAPIP BE_mapRealPointer)(uint r_seg,uint r_off);
-    void *  (PMAPIP BE_getVESABuf)(uint *len,uint *rseg,uint *roff);
-    void    (PMAPIP BE_callRealMode)(uint seg,uint off,RMREGS *regs,RMSREGS *sregs);
-    int     (PMAPIP BE_int86)(int intno,RMREGS *in,RMREGS *out);
-    int     (PMAPIP BE_int86x)(int intno,RMREGS *in,RMREGS *out,RMSREGS *sregs);
-    void *  reserved1;
-    void    (PMAPIP BE_exit)(void);
-    } BE_exports;
-
-/****************************************************************************
-REMARKS:
-Function pointer type for the Binary Portable DLL initialisation entry point.
-{secret}
-****************************************************************************/
-typedef BE_exports * (PMAPIP BE_initLibrary_t)(PM_imports *PMImp);
-
-#pragma pack()
-
-/*---------------------------- Global variables ---------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {                        /* Use "C" linkage when in C++ mode */
-#endif
-
-/* {secret} Global BIOS emulator system environment */
-extern BE_sysEnv _BE_env;
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-/* BIOS emulator library entry points */
-
-ibool   PMAPI BE_init(u32 debugFlags,int memSize,BE_VGAInfo *info);
-void    PMAPI BE_setVGA(BE_VGAInfo *info);
-void    PMAPI BE_getVGA(BE_VGAInfo *info);
-void    PMAPI BE_setDebugFlags(u32 debugFlags);
-void *  PMAPI BE_mapRealPointer(uint r_seg,uint r_off);
-void *  PMAPI BE_getVESABuf(uint *len,uint *rseg,uint *roff);
-void    PMAPI BE_callRealMode(uint seg,uint off,RMREGS *regs,RMSREGS *sregs);
-int     PMAPI BE_int86(int intno,RMREGS *in,RMREGS *out);
-int     PMAPI BE_int86x(int intno,RMREGS *in,RMREGS *out,RMSREGS *sregs);
-void    PMAPI BE_exit(void);
-
-#ifdef  __cplusplus
-}                                   /* End of "C" linkage for C++       */
-#endif
-
-#endif /* __BIOSEMU_H */
diff --git a/board/MAI/bios_emulator/scitech/include/event.h b/board/MAI/bios_emulator/scitech/include/event.h
deleted file mode 100644
index beeac87645..0000000000
--- a/board/MAI/bios_emulator/scitech/include/event.h
+++ /dev/null
@@ -1,696 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Header file for the SciTech cross platform event library
-*
-****************************************************************************/
-
-#ifndef __EVENT_H
-#define __EVENT_H
-
-#include "scitech.h"
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/* 'C' calling conventions always */
-
-#define EVTAPI  _ASMAPI
-#define EVTAPIP _ASMAPIP
-
-/* Event message masks for keyDown events */
-
-#define EVT_ASCIIMASK   0x00FF      /* ASCII code of key pressed        */
-#define EVT_SCANMASK    0xFF00      /* Scan code of key pressed         */
-#define EVT_COUNTMASK   0x7FFF0000L /* Count for KEYREPEAT's            */
-
-/* Macros to extract values from the message fields */
-
-#define EVT_asciiCode(m)    ( (uchar) (m & EVT_ASCIIMASK) )
-#define EVT_scanCode(m)     ( (uchar) ( (m & EVT_SCANMASK) >> 8 ) )
-#define EVT_repeatCount(m)  ( (short) ( (m & EVT_COUNTMASK) >> 16 ) )
-
-/****************************************************************************
-REMARKS:
-Defines the set of ASCII codes reported by the event library functions
-in the message field. Use the EVT_asciiCode macro to extract the code
-from the event structure.
-
-HEADER:
-event.h
-****************************************************************************/
-typedef enum {
-    ASCII_ctrlA             = 0x01,
-    ASCII_ctrlB             = 0x02,
-    ASCII_ctrlC             = 0x03,
-    ASCII_ctrlD             = 0x04,
-    ASCII_ctrlE             = 0x05,
-    ASCII_ctrlF             = 0x06,
-    ASCII_ctrlG             = 0x07,
-    ASCII_backspace         = 0x08,
-    ASCII_ctrlH             = 0x08,
-    ASCII_tab               = 0x09,
-    ASCII_ctrlI             = 0x09,
-    ASCII_ctrlJ             = 0x0A,
-    ASCII_ctrlK             = 0x0B,
-    ASCII_ctrlL             = 0x0C,
-    ASCII_enter             = 0x0D,
-    ASCII_ctrlM             = 0x0D,
-    ASCII_ctrlN             = 0x0E,
-    ASCII_ctrlO             = 0x0F,
-    ASCII_ctrlP             = 0x10,
-    ASCII_ctrlQ             = 0x11,
-    ASCII_ctrlR             = 0x12,
-    ASCII_ctrlS             = 0x13,
-    ASCII_ctrlT             = 0x14,
-    ASCII_ctrlU             = 0x15,
-    ASCII_ctrlV             = 0x16,
-    ASCII_ctrlW             = 0x17,
-    ASCII_ctrlX             = 0x18,
-    ASCII_ctrlY             = 0x19,
-    ASCII_ctrlZ             = 0x1A,
-    ASCII_esc               = 0x1B,
-    ASCII_space             = 0x20,
-    ASCII_exclamation       = 0x21, /* ! */
-    ASCII_quote             = 0x22, /* " */
-    ASCII_pound             = 0x23, /* # */
-    ASCII_dollar            = 0x24, /* $ */
-    ASCII_percent           = 0x25, /* % */
-    ASCII_ampersand         = 0x26, /* & */
-    ASCII_apostrophe        = 0x27, /* ' */
-    ASCII_leftBrace         = 0x28, /* ( */
-    ASCII_rightBrace        = 0x29, /* ) */
-    ASCII_times             = 0x2A, /* * */
-    ASCII_plus              = 0x2B, /* + */
-    ASCII_comma             = 0x2C, /* , */
-    ASCII_minus             = 0x2D, /* - */
-    ASCII_period            = 0x2E, /* . */
-    ASCII_divide            = 0x2F, /* / */
-    ASCII_0                 = 0x30,
-    ASCII_1                 = 0x31,
-    ASCII_2                 = 0x32,
-    ASCII_3                 = 0x33,
-    ASCII_4                 = 0x34,
-    ASCII_5                 = 0x35,
-    ASCII_6                 = 0x36,
-    ASCII_7                 = 0x37,
-    ASCII_8                 = 0x38,
-    ASCII_9                 = 0x39,
-    ASCII_colon             = 0x3A, /* : */
-    ASCII_semicolon         = 0x3B, /* ; */
-    ASCII_lessThan          = 0x3C, /* < */
-    ASCII_equals            = 0x3D, /* = */
-    ASCII_greaterThan       = 0x3E, /* > */
-    ASCII_question          = 0x3F, /* ? */
-    ASCII_at                = 0x40, /* @ */
-    ASCII_A                 = 0x41,
-    ASCII_B                 = 0x42,
-    ASCII_C                 = 0x43,
-    ASCII_D                 = 0x44,
-    ASCII_E                 = 0x45,
-    ASCII_F                 = 0x46,
-    ASCII_G                 = 0x47,
-    ASCII_H                 = 0x48,
-    ASCII_I                 = 0x49,
-    ASCII_J                 = 0x4A,
-    ASCII_K                 = 0x4B,
-    ASCII_L                 = 0x4C,
-    ASCII_M                 = 0x4D,
-    ASCII_N                 = 0x4E,
-    ASCII_O                 = 0x4F,
-    ASCII_P                 = 0x50,
-    ASCII_Q                 = 0x51,
-    ASCII_R                 = 0x52,
-    ASCII_S                 = 0x53,
-    ASCII_T                 = 0x54,
-    ASCII_U                 = 0x55,
-    ASCII_V                 = 0x56,
-    ASCII_W                 = 0x57,
-    ASCII_X                 = 0x58,
-    ASCII_Y                 = 0x59,
-    ASCII_Z                 = 0x5A,
-    ASCII_leftSquareBrace   = 0x5B, /* [ */
-    ASCII_backSlash         = 0x5C, /* \ */
-    ASCII_rightSquareBrace  = 0x5D, /* ] */
-    ASCII_caret             = 0x5E, /* ^ */
-    ASCII_underscore        = 0x5F, /* _ */
-    ASCII_leftApostrophe    = 0x60, /* ` */
-    ASCII_a                 = 0x61,
-    ASCII_b                 = 0x62,
-    ASCII_c                 = 0x63,
-    ASCII_d                 = 0x64,
-    ASCII_e                 = 0x65,
-    ASCII_f                 = 0x66,
-    ASCII_g                 = 0x67,
-    ASCII_h                 = 0x68,
-    ASCII_i                 = 0x69,
-    ASCII_j                 = 0x6A,
-    ASCII_k                 = 0x6B,
-    ASCII_l                 = 0x6C,
-    ASCII_m                 = 0x6D,
-    ASCII_n                 = 0x6E,
-    ASCII_o                 = 0x6F,
-    ASCII_p                 = 0x70,
-    ASCII_q                 = 0x71,
-    ASCII_r                 = 0x72,
-    ASCII_s                 = 0x73,
-    ASCII_t                 = 0x74,
-    ASCII_u                 = 0x75,
-    ASCII_v                 = 0x76,
-    ASCII_w                 = 0x77,
-    ASCII_x                 = 0x78,
-    ASCII_y                 = 0x79,
-    ASCII_z                 = 0x7A,
-    ASCII_leftCurlyBrace    = 0x7B, /* { */
-    ASCII_verticalBar       = 0x7C, /* | */
-    ASCII_rightCurlyBrace   = 0x7D, /* } */
-    ASCII_tilde             = 0x7E  /* ~ */
-    } EVT_asciiCodesType;
-
-/****************************************************************************
-REMARKS:
-Defines the set of scan codes reported by the event library functions
-in the message field. Use the EVT_scanCode macro to extract the code
-from the event structure. Note that the scan codes reported will be the
-same across all keyboards (assuming the placement of keys on a 101 key US
-keyboard), but the translated ASCII values may be different depending on
-the country code pages in use.
-
-NOTE:   Scan codes in the event library are not really hardware scan codes,
-	but rather virtual scan codes as generated by a low level keyboard
-	interface driver. All virtual codes begin with scan code 0x60 and
-	range up from there.
-
-HEADER:
-event.h
-****************************************************************************/
-typedef enum {
-    KB_padEnter             = 0x60, /* Keypad keys */
-    KB_padMinus             = 0x4A,
-    KB_padPlus              = 0x4E,
-    KB_padTimes             = 0x37,
-    KB_padDivide            = 0x61,
-    KB_padLeft              = 0x62,
-    KB_padRight             = 0x63,
-    KB_padUp                = 0x64,
-    KB_padDown              = 0x65,
-    KB_padInsert            = 0x66,
-    KB_padDelete            = 0x67,
-    KB_padHome              = 0x68,
-    KB_padEnd               = 0x69,
-    KB_padPageUp            = 0x6A,
-    KB_padPageDown          = 0x6B,
-    KB_padCenter            = 0x4C,
-    KB_F1                   = 0x3B, /* Function keys */
-    KB_F2                   = 0x3C,
-    KB_F3                   = 0x3D,
-    KB_F4                   = 0x3E,
-    KB_F5                   = 0x3F,
-    KB_F6                   = 0x40,
-    KB_F7                   = 0x41,
-    KB_F8                   = 0x42,
-    KB_F9                   = 0x43,
-    KB_F10                  = 0x44,
-    KB_F11                  = 0x57,
-    KB_F12                  = 0x58,
-    KB_left                 = 0x4B, /* Cursor control keys */
-    KB_right                = 0x4D,
-    KB_up                   = 0x48,
-    KB_down                 = 0x50,
-    KB_insert               = 0x52,
-    KB_delete               = 0x53,
-    KB_home                 = 0x47,
-    KB_end                  = 0x4F,
-    KB_pageUp               = 0x49,
-    KB_pageDown             = 0x51,
-    KB_capsLock             = 0x3A,
-    KB_numLock              = 0x45,
-    KB_scrollLock           = 0x46,
-    KB_leftShift            = 0x2A,
-    KB_rightShift           = 0x36,
-    KB_leftCtrl             = 0x1D,
-    KB_rightCtrl            = 0x6C,
-    KB_leftAlt              = 0x38,
-    KB_rightAlt             = 0x6D,
-    KB_leftWindows          = 0x5B,
-    KB_rightWindows         = 0x5C,
-    KB_menu                 = 0x5D,
-    KB_sysReq               = 0x54,
-    KB_esc                  = 0x01, /* Normal keyboard keys */
-    KB_1                    = 0x02,
-    KB_2                    = 0x03,
-    KB_3                    = 0x04,
-    KB_4                    = 0x05,
-    KB_5                    = 0x06,
-    KB_6                    = 0x07,
-    KB_7                    = 0x08,
-    KB_8                    = 0x09,
-    KB_9                    = 0x0A,
-    KB_0                    = 0x0B,
-    KB_minus                = 0x0C,
-    KB_equals               = 0x0D,
-    KB_backSlash            = 0x2B,
-    KB_backspace            = 0x0E,
-    KB_tab                  = 0x0F,
-    KB_Q                    = 0x10,
-    KB_W                    = 0x11,
-    KB_E                    = 0x12,
-    KB_R                    = 0x13,
-    KB_T                    = 0x14,
-    KB_Y                    = 0x15,
-    KB_U                    = 0x16,
-    KB_I                    = 0x17,
-    KB_O                    = 0x18,
-    KB_P                    = 0x19,
-    KB_leftSquareBrace      = 0x1A,
-    KB_rightSquareBrace     = 0x1B,
-    KB_enter                = 0x1C,
-    KB_A                    = 0x1E,
-    KB_S                    = 0x1F,
-    KB_D                    = 0x20,
-    KB_F                    = 0x21,
-    KB_G                    = 0x22,
-    KB_H                    = 0x23,
-    KB_J                    = 0x24,
-    KB_K                    = 0x25,
-    KB_L                    = 0x26,
-    KB_semicolon            = 0x27,
-    KB_apostrophe           = 0x28,
-    KB_Z                    = 0x2C,
-    KB_X                    = 0x2D,
-    KB_C                    = 0x2E,
-    KB_V                    = 0x2F,
-    KB_B                    = 0x30,
-    KB_N                    = 0x31,
-    KB_M                    = 0x32,
-    KB_comma                = 0x33,
-    KB_period               = 0x34,
-    KB_divide               = 0x35,
-    KB_space                = 0x39,
-    KB_tilde                = 0x29
-    } EVT_scanCodesType;
-
-/****************************************************************************
-REMARKS:
-Defines the mask for the joystick axes that are present
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_JOY_AXIS_X1     - Joystick 1, X axis is present
-EVT_JOY_AXIS_Y1     - Joystick 1, Y axis is present
-EVT_JOY_AXIS_X2     - Joystick 2, X axis is present
-EVT_JOY_AXIS_Y2     - Joystick 2, Y axis is present
-EVT_JOY_AXIS_ALL    - Mask for all axes
-****************************************************************************/
-typedef enum {
-    EVT_JOY_AXIS_X1     = 0x00000001,
-    EVT_JOY_AXIS_Y1     = 0x00000002,
-    EVT_JOY_AXIS_X2     = 0x00000004,
-    EVT_JOY_AXIS_Y2     = 0x00000008,
-    EVT_JOY_AXIS_ALL    = 0x0000000F
-    } EVT_eventJoyAxisType;
-
-/****************************************************************************
-REMARKS:
-Defines the event message masks for joystick events
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_JOY1_BUTTONA    - Joystick 1, button A is down
-EVT_JOY1_BUTTONB    - Joystick 1, button B is down
-EVT_JOY2_BUTTONA    - Joystick 2, button A is down
-EVT_JOY2_BUTTONB    - Joystick 2, button B is down
-****************************************************************************/
-typedef enum {
-    EVT_JOY1_BUTTONA    = 0x00000001,
-    EVT_JOY1_BUTTONB    = 0x00000002,
-    EVT_JOY2_BUTTONA    = 0x00000004,
-    EVT_JOY2_BUTTONB    = 0x00000008
-    } EVT_eventJoyMaskType;
-
-/****************************************************************************
-REMARKS:
-Defines the event message masks for mouse events
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_LEFTBMASK   - Left button is held down
-EVT_RIGHTBMASK  - Right button is held down
-EVT_MIDDLEBMASK - Middle button is held down
-EVT_BOTHBMASK   - Both left and right held down together
-EVT_ALLBMASK    - All buttons pressed
-EVT_DBLCLICK    - Set if mouse down event was a double click
-****************************************************************************/
-typedef enum {
-    EVT_LEFTBMASK   = 0x00000001,
-    EVT_RIGHTBMASK  = 0x00000002,
-    EVT_MIDDLEBMASK = 0x00000004,
-    EVT_BOTHBMASK   = 0x00000007,
-    EVT_ALLBMASK    = 0x00000007,
-    EVT_DBLCLICK    = 0x00010000
-    } EVT_eventMouseMaskType;
-
-/****************************************************************************
-REMARKS:
-Defines the event modifier masks. These are the masks used to extract
-the modifier information from the modifiers field of the event_t structure.
-Note that the values in the modifiers field represent the values of these
-modifier keys at the time the event occurred, not the time you decided
-to process the event.
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_LEFTBUT     - Set if left mouse button was down
-EVT_RIGHTBUT    - Set if right mouse button was down
-EVT_MIDDLEBUT   - Set if the middle button was down
-EVT_RIGHTSHIFT  - Set if right shift was down
-EVT_LEFTSHIFT   - Set if left shift was down
-EVT_RIGHTCTRL   - Set if right ctrl key was down
-EVT_RIGHTALT    - Set if right alt key was down
-EVT_LEFTCTRL    - Set if left ctrl key was down
-EVT_LEFTALT     - Set if left alt key was down
-EVT_SHIFTKEY    - Mask for any shift key down
-EVT_CTRLSTATE   - Set if ctrl key was down
-EVT_ALTSTATE    - Set if alt key was down
-EVT_CAPSLOCK    - Caps lock is active
-EVT_NUMLOCK     - Num lock is active
-EVT_SCROLLLOCK  - Scroll lock is active
-****************************************************************************/
-typedef enum {
-    EVT_LEFTBUT     = 0x00000001,
-    EVT_RIGHTBUT    = 0x00000002,
-    EVT_MIDDLEBUT   = 0x00000004,
-    EVT_RIGHTSHIFT  = 0x00000008,
-    EVT_LEFTSHIFT   = 0x00000010,
-    EVT_RIGHTCTRL   = 0x00000020,
-    EVT_RIGHTALT    = 0x00000040,
-    EVT_LEFTCTRL    = 0x00000080,
-    EVT_LEFTALT     = 0x00000100,
-    EVT_SHIFTKEY    = 0x00000018,
-    EVT_CTRLSTATE   = 0x000000A0,
-    EVT_ALTSTATE    = 0x00000140,
-    EVT_SCROLLLOCK  = 0x00000200,
-    EVT_NUMLOCK     = 0x00000400,
-    EVT_CAPSLOCK    = 0x00000800
-    } EVT_eventModMaskType;
-
-/****************************************************************************
-REMARKS:
-Defines the event codes returned in the event_t structures what field. Note
-that these are defined as a set of mutually exlusive bit fields, so you
-can test for multiple event types using the combined event masks defined
-in the EVT_eventMaskType enumeration.
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_NULLEVT     - A null event
-EVT_KEYDOWN     - Key down event
-EVT_KEYREPEAT   - Key repeat event
-EVT_KEYUP       - Key up event
-EVT_MOUSEDOWN   - Mouse down event
-EVT_MOUSEAUTO   - Mouse down autorepeat event
-EVT_MOUSEUP     - Mouse up event
-EVT_MOUSEMOVE   - Mouse movement event
-EVT_JOYCLICK    - Joystick button state change event
-EVT_JOYMOVE     - Joystick movement event
-EVT_USEREVT     - First user event
-****************************************************************************/
-typedef enum {
-    EVT_NULLEVT     = 0x00000000,
-    EVT_KEYDOWN     = 0x00000001,
-    EVT_KEYREPEAT   = 0x00000002,
-    EVT_KEYUP       = 0x00000004,
-    EVT_MOUSEDOWN   = 0x00000008,
-    EVT_MOUSEAUTO   = 0x00000010,
-    EVT_MOUSEUP     = 0x00000020,
-    EVT_MOUSEMOVE   = 0x00000040,
-    EVT_JOYCLICK    = 0x00000080,
-    EVT_JOYMOVE     = 0x00000100,
-    EVT_USEREVT     = 0x00000200
-    } EVT_eventType;
-
-/****************************************************************************
-REMARKS:
-Defines the event code masks you can use to test for multiple types of
-events, since the event codes are mutually exlusive bit fields.
-
-HEADER:
-event.h
-
-MEMBERS:
-EVT_KEYEVT      - Mask for any key event
-EVT_MOUSEEVT    - Mask for any mouse event
-EVT_MOUSECLICK  - Mask for any mouse click event
-EVT_JOYEVT      - Mask for any joystick event
-EVT_EVERYEVT    - Mask for any event
-****************************************************************************/
-typedef enum {
-    EVT_KEYEVT      = (EVT_KEYDOWN | EVT_KEYREPEAT | EVT_KEYUP),
-    EVT_MOUSEEVT    = (EVT_MOUSEDOWN | EVT_MOUSEAUTO | EVT_MOUSEUP | EVT_MOUSEMOVE),
-    EVT_MOUSECLICK  = (EVT_MOUSEDOWN | EVT_MOUSEUP),
-    EVT_JOYEVT      = (EVT_JOYCLICK | EVT_JOYMOVE),
-    EVT_EVERYEVT    = 0x7FFFFFFF
-    } EVT_eventMaskType;
-
-/****************************************************************************
-REMARKS:
-Structure describing the information contained in an event extracted from
-the event queue.
-
-HEADER:
-event.h
-
-MEMBERS:
-which       - Window identifier for message for use by high level window manager
-	      code (i.e. MegaVision GUI or Windows API).
-what        - Type of event that occurred. Will be one of the values defined by
-	      the EVT_eventType enumeration.
-when        - Time that the event occurred in milliseconds since startup
-where_x     - X coordinate of the mouse cursor location at the time of the event
-	      (in screen coordinates). For joystick events this represents
-	      the position of the first joystick X axis.
-where_y     - Y coordinate of the mouse cursor location at the time of the event
-	      (in screen coordinates). For joystick events this represents
-	      the position of the first joystick Y axis.
-relative_x  - Relative movement of the mouse cursor in the X direction (in
-	      units of mickeys, or 1/200th of an inch). For joystick events
-	      this represents the position of the second joystick X axis.
-relative_y  - Relative movement of the mouse cursor in the Y direction (in
-	      units of mickeys, or 1/200th of an inch). For joystick events
-	      this represents the position of the second joystick Y axis.
-message     - Event specific message for the event. For use events this can be
-	      any user specific information. For keyboard events this contains
-	      the ASCII code in bits 0-7, the keyboard scan code in bits 8-15 and
-	      the character repeat count in bits 16-30. You can use the
-	      EVT_asciiCode, EVT_scanCode and EVT_repeatCount macros to extract
-	      this information from the message field. For mouse events this
-	      contains information about which button was pressed, and will be a
-	      combination of the flags defined by the EVT_eventMouseMaskType
-	      enumeration. For joystick events, this conatins information
-	      about which buttons were pressed, and will be a combination of
-	      the flags defined by the EVT_eventJoyMaskType enumeration.
-modifiers   - Contains additional information about the state of the keyboard
-	      shift modifiers (Ctrl, Alt and Shift keys) when the event
-	      occurred. For mouse events it will also contain the state of
-	      the mouse buttons. Will be a combination of the values defined
-	      by the EVT_eventModMaskType enumeration.
-next        - Internal use; do not use.
-prev        - Internal use; do not use.
-****************************************************************************/
-typedef struct {
-    ulong       which;
-    ulong       what;
-    ulong       when;
-    int         where_x;
-    int         where_y;
-    int         relative_x;
-    int         relative_y;
-    ulong       message;
-    ulong       modifiers;
-    int         next;
-    int         prev;
-    } event_t;
-
-/****************************************************************************
-REMARKS:
-Structure describing an entry in the code page table. A table of translation
-codes for scan codes to ASCII codes is provided in this table to be used
-by the keyboard event libraries. On some OS'es the keyboard translation is
-handled by the OS, but for DOS and embedded systems you must register a
-different code page translation table if you want to support keyboards
-other than the US English keyboard (the default).
-
-NOTE:   Entries in code page tables *must* be in ascending order for the
-	scan codes as we do a binary search on the tables for the ASCII
-	code equivalents.
-
-HEADER:
-event.h
-
-MEMBERS:
-scanCode    - Scan code to translate (really the virtual scan code).
-asciiCode   - ASCII code for this scan code.
-****************************************************************************/
-typedef struct {
-    uchar       scanCode;
-    uchar       asciiCode;
-    } codepage_entry_t;
-
-/****************************************************************************
-REMARKS:
-Structure describing a complete code page translation table. The table
-contains translation tables for normal keys, shifted keys and ctrl keys.
-The Ctrl key always has precedence over the shift table, and the shift
-table is used when the shift key is down or the CAPSLOCK key is down.
-
-HEADER:
-event.h
-
-MEMBERS:
-name            - Name of the code page table (ie: "US English")
-normal          - Code page for translating normal keys
-normalLen       - Length of normal translation table
-caps            - Code page for translating keys when CAPSLOCK is down
-capsLen         - Length of CAPSLOCK translation table
-shift           - Code page for shifted keys (ie: shift key is held down)
-shiftLen        - Length of shifted translation table
-shiftCaps       - Code page for shifted keys when CAPSLOCK is down
-shiftCapsLen    - Length of shifted CAPSLOCK translation table
-ctrl            - Code page for ctrl'ed keys (ie: ctrl key is held down)
-ctrlLen         - Length of ctrl'ed translation table
-numPad          - Code page for NUMLOCK'ed keypad keys
-numPadLen       - Length of NUMLOCK'ed translation table
-****************************************************************************/
-typedef struct {
-    char                name[20];
-    codepage_entry_t    *normal;
-    int                 normalLen;
-    codepage_entry_t    *caps;
-    int                 capsLen;
-    codepage_entry_t    *shift;
-    int                 shiftLen;
-    codepage_entry_t    *shiftCaps;
-    int                 shiftCapsLen;
-    codepage_entry_t    *ctrl;
-    int                 ctrlLen;
-    codepage_entry_t    *numPad;
-    int                 numPadLen;
-    } codepage_t;
-
-/* {secret} */
-typedef ibool (EVTAPIP _EVT_userEventFilter)(event_t *evt);
-/* {secret} */
-typedef void (EVTAPIP _EVT_mouseMoveHandler)(int x,int y);
-/* {secret} */
-typedef void (EVTAPIP _EVT_heartBeatCallback)(void *params);
-
-/* Macro to find the size of a static array */
-
-#define EVT_ARR_SIZE(a)         (sizeof(a)/sizeof((a)[0]))
-
-#pragma pack()
-
-/*--------------------------- Global variables ----------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            /* Use "C" linkage when in C++ mode */
-#endif
-
-/* Standard code page tables */
-
-extern codepage_t _CP_US_English;
-
-/*------------------------- Function Prototypes ---------------------------*/
-
-/* Public API functions for user applications */
-
-ibool   EVTAPI EVT_getNext(event_t *evt,ulong mask);
-ibool   EVTAPI EVT_peekNext(event_t *evt,ulong mask);
-ibool   EVTAPI EVT_post(ulong which,ulong what,ulong message,ulong modifiers);
-void    EVTAPI EVT_flush(ulong mask);
-void    EVTAPI EVT_halt(event_t *evt,ulong mask);
-ibool   EVTAPI EVT_isKeyDown(uchar scanCode);
-void    EVTAPI EVT_setMousePos(int x,int y);
-void    EVTAPI EVT_getMousePos(int *x,int *y);
-
-/* Function to enable/disable updating of keyboard LED status indicators */
-
-void    EVTAPI EVT_allowLEDS(ibool enable);
-
-/* Function to install a custom keyboard code page. Default is US English */
-
-codepage_t *EVTAPI EVT_getCodePage(void);
-void    EVTAPI EVT_setCodePage(codepage_t *page);
-
-/* Functions for fine grained joystick calibration */
-
-void    EVTAPI EVT_pollJoystick(void);
-int     EVTAPI EVT_joyIsPresent(void);
-void    EVTAPI EVT_joySetUpperLeft(void);
-void    EVTAPI EVT_joySetLowerRight(void);
-void    EVTAPI EVT_joySetCenter(void);
-
-/* Install user supplied event filter callback */
-
-void    EVTAPI EVT_setUserEventFilter(_EVT_userEventFilter filter);
-
-/* Install user supplied event heartbeat callback function */
-
-void    EVTAPI EVT_setHeartBeatCallback(_EVT_heartBeatCallback callback,void *params);
-void    EVTAPI EVT_getHeartBeatCallback(_EVT_heartBeatCallback *callback,void **params);
-
-/* Internal functions to initialise and kill the event manager. MGL
- * applications should never call these functions directly as the MGL
- * libraries do it for you.
- */
-
-/* {secret} */
-void    EVTAPI EVT_init(_EVT_mouseMoveHandler mouseMove);
-/* {secret} */
-void    EVTAPI EVT_setMouseRange(int xRes,int yRes);
-/* {secret} */
-void    EVTAPI EVT_suspend(void);
-/* {secret} */
-void    EVTAPI EVT_resume(void);
-/* {secret} */
-void    EVTAPI EVT_exit(void);
-
-#ifdef  __cplusplus
-}                       /* End of "C" linkage for C++   */
-#endif  /* __cplusplus */
-
-#endif  /* __EVENT_H */
diff --git a/board/MAI/bios_emulator/scitech/include/mtrr.h b/board/MAI/bios_emulator/scitech/include/mtrr.h
deleted file mode 100644
index b29812c928..0000000000
--- a/board/MAI/bios_emulator/scitech/include/mtrr.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Include file defining the external ring 0 helper functions
-*               needed by the MTRR module. These functions may be included
-*               directly for native ring 0 device drivers, or they may
-*               be calls down to a ring 0 helper device driver where
-*               appropriate (or the entire MTRR module may be located in
-*               the device driver if the device driver is 32-bit).
-*
-****************************************************************************/
-
-#ifndef __MTRR_H
-#define __MTRR_H
-
-#include "scitech.h"
-
-/*--------------------------- Function Prototypes -------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            /* Use "C" linkage when in C++ mode */
-#endif
-
-/* Internal functions (requires ring 0 access or helper functions!) */
-
-void    MTRR_init(void);
-int     MTRR_enableWriteCombine(ulong base,ulong size,uint type);
-
-/* External assembler helper functions */
-
-ibool   _ASMAPI _MTRR_isRing0(void);
-ulong   _ASMAPI _MTRR_disableInt(void);
-void    _ASMAPI _MTRR_restoreInt(ulong flags);
-ulong   _ASMAPI _MTRR_saveCR4(void);
-void    _ASMAPI _MTRR_restoreCR4(ulong cr4Val);
-uchar   _ASMAPI _MTRR_getCx86(uchar reg);
-void    _ASMAPI _MTRR_setCx86(uchar reg,uchar data);
-#ifdef  __16BIT__
-void    _ASMAPI _MTRR_readMSR(ulong reg, ulong far *eax, ulong far *edx);
-#else
-void    _ASMAPI _MTRR_readMSR(ulong reg, ulong *eax, ulong *edx);
-#endif
-void    _ASMAPI _MTRR_writeMSR(ulong reg, ulong eax, ulong edx);
-
-#ifdef  __cplusplus
-}                       /* End of "C" linkage for C++   */
-#endif
-
-#endif  /* __MTRR_H */
diff --git a/board/MAI/bios_emulator/scitech/include/pcilib.h b/board/MAI/bios_emulator/scitech/include/pcilib.h
deleted file mode 100644
index 238f8ef83b..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pcilib.h
+++ /dev/null
@@ -1,413 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Header file for interface routines to the PCI bus.
-*
-****************************************************************************/
-
-#ifndef __PCILIB_H
-#define __PCILIB_H
-
-#include "scitech.h"
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/* Defines for PCIDeviceInfo.HeaderType */
-
-typedef enum {
-    PCI_deviceType                  = 0x00,
-    PCI_bridgeType                  = 0x01,
-    PCI_cardBusBridgeType           = 0x02,
-    PCI_multiFunctionType           = 0x80
-    } PCIHeaderTypeFlags;
-
-/* Defines for PCIDeviceInfo.Command */
-
-typedef enum {
-    PCI_enableIOSpace               = 0x0001,
-    PCI_enableMemorySpace           = 0x0002,
-    PCI_enableBusMaster             = 0x0004,
-    PCI_enableSpecialCylces         = 0x0008,
-    PCI_enableWriteAndInvalidate    = 0x0010,
-    PCI_enableVGACompatiblePalette  = 0x0020,
-    PCI_enableParity                = 0x0040,
-    PCI_enableWaitCycle             = 0x0080,
-    PCI_enableSerr                  = 0x0100,
-    PCI_enableFastBackToBack        = 0x0200
-    } PCICommandFlags;
-
-/* Defines for PCIDeviceInfo.Status */
-
-typedef enum {
-    PCI_statusCapabilitiesList      = 0x0010,
-    PCI_status66MhzCapable          = 0x0020,
-    PCI_statusUDFSupported          = 0x0040,
-    PCI_statusFastBackToBack        = 0x0080,
-    PCI_statusDataParityDetected    = 0x0100,
-    PCI_statusDevSel                = 0x0600,
-    PCI_statusSignaledTargetAbort   = 0x0800,
-    PCI_statusRecievedTargetAbort   = 0x1000,
-    PCI_statusRecievedMasterAbort   = 0x2000,
-    PCI_statusSignaledSystemError   = 0x4000,
-    PCI_statusDetectedParityError   = 0x8000
-    } PCIStatusFlags;
-
-/* PCI capability IDs */
-
-typedef enum {
-    PCI_capsPowerManagement         = 0x01,
-    PCI_capsAGP                     = 0x02,
-    PCI_capsMSI                     = 0x05
-    } PCICapsType;
-
-/* PCI AGP rate definitions */
-
-typedef enum {
-    PCI_AGPRate1X                   = 0x1,
-    PCI_AGPRate2X                   = 0x2,
-    PCI_AGPRate4X                   = 0x4
-    } PCIAGPRateType;
-
-/* NOTE: We define all bitfield's as uint's, specifically so that the IBM
- *       Visual Age C++ compiler does not complain. We need them to be
- *       32-bits wide, and this is the width of an unsigned integer, but
- *       we can't use a ulong to make this explicit or we get errors.
- */
-
-/* Structure defining a PCI slot identifier */
-
-typedef union {
-    struct {
-	uint    Zero:2;
-	uint    Register:6;
-	uint    Function:3;
-	uint    Device:5;
-	uint    Bus:8;
-	uint    Reserved:7;
-	uint    Enable:1;
-	} p;
-    ulong   i;
-    } PCIslot;
-
-/* Structure defining the regular (type 0) PCI configuration register
- * layout. We use this in a union below so we can describe all types of
- * PCI configuration spaces with a single structure.
- */
-
-typedef struct {
-    ulong   BaseAddress10;
-    ulong   BaseAddress14;
-    ulong   BaseAddress18;
-    ulong   BaseAddress1C;
-    ulong   BaseAddress20;
-    ulong   BaseAddress24;
-    ulong   CardbusCISPointer;
-    ushort  SubSystemVendorID;
-    ushort  SubSystemID;
-    ulong   ROMBaseAddress;
-    uchar   CapabilitiesPointer;
-    uchar   reserved1;
-    uchar   reserved2;
-    uchar   reserved3;
-    ulong   reserved4;
-    uchar   InterruptLine;
-    uchar   InterruptPin;
-    uchar   MinimumGrant;
-    uchar   MaximumLatency;
-
-    /* These are not in the actual config space, but we enumerate them */
-    ulong   BaseAddress10Len;
-    ulong   BaseAddress14Len;
-    ulong   BaseAddress18Len;
-    ulong   BaseAddress1CLen;
-    ulong   BaseAddress20Len;
-    ulong   BaseAddress24Len;
-    ulong   ROMBaseAddressLen;
-    } PCIType0Info;
-
-/* Structure defining PCI to PCI bridge (type 1) PCI configuration register
- * layout. We use this in a union below so we can describe all types of
- * PCI configuration spaces with a single structure.
- */
-
-typedef struct {
-    ulong   BaseAddress10;
-    ulong   BaseAddress14;
-    uchar   PrimaryBusNumber;
-    uchar   SecondayBusNumber;
-    uchar   SubordinateBusNumber;
-    uchar   SecondaryLatencyTimer;
-    uchar   IOBase;
-    uchar   IOLimit;
-    ushort  SecondaryStatus;
-    ushort  MemoryBase;
-    ushort  MemoryLimit;
-    ushort  PrefetchableMemoryBase;
-    ushort  PrefetchableMemoryLimit;
-    ulong   PrefetchableBaseHi;
-    ulong   PrefetchableLimitHi;
-    ushort  IOBaseHi;
-    ushort  IOLimitHi;
-    uchar   CapabilitiesPointer;
-    uchar   reserved1;
-    uchar   reserved2;
-    uchar   reserved3;
-    ulong   ROMBaseAddress;
-    uchar   InterruptLine;
-    uchar   InterruptPin;
-    ushort  BridgeControl;
-    } PCIType1Info;
-
-/* PCI to CardBus bridge (type 2) configuration information */
-typedef struct {
-    ulong   SocketRegistersBaseAddress;
-    uchar   CapabilitiesPointer;
-    uchar   reserved1;
-    ushort  SecondaryStatus;
-    uchar   PrimaryBus;
-    uchar   SecondaryBus;
-    uchar   SubordinateBus;
-    uchar   SecondaryLatency;
-    struct  {
-	ulong   Base;
-	ulong   Limit;
-	} Range[4];
-    uchar   InterruptLine;
-    uchar   InterruptPin;
-    ushort  BridgeControl;
-    } PCIType2Info;
-
-/* Structure defining the PCI configuration space information for a
- * single PCI device on the PCI bus. We enumerate all this information
- * for all PCI devices on the bus.
- */
-
-typedef struct {
-    ulong               dwSize;
-    PCIslot             slot;
-    ulong               mech1;
-    ushort              VendorID;
-    ushort              DeviceID;
-    ushort              Command;
-    ushort              Status;
-    uchar               RevID;
-    uchar               Interface;
-    uchar               SubClass;
-    uchar               BaseClass;
-    uchar               CacheLineSize;
-    uchar               LatencyTimer;
-    uchar               HeaderType;
-    uchar               BIST;
-    union {
-	PCIType0Info    type0;
-	PCIType1Info    type1;
-	PCIType2Info    type2;
-	} u;
-    } PCIDeviceInfo;
-
-/* PCI Capability header structure. All PCI capabilities have the
- * following header.
- *
- * capsID is used to identify the type of the structure as define above.
- *
- * next is the offset in PCI configuration space (0x40-0xFC) of the
- * next capability structure in the list, or 0x00 if there are no more
- * entries.
- */
-
-typedef struct {
-    uchar   capsID;
-    uchar   next;
-    } PCICapsHeader;
-
-/* Structure defining the PCI AGP status register contents */
-
-typedef struct {
-    uint    rate:3;
-    uint    rsvd1:1;
-    uint    fastWrite:1;
-    uint    fourGB:1;
-    uint    rsvd2:3;
-    uint    sideBandAddressing:1;
-    uint    rsvd3:14;
-    uint    requestQueueDepthMaximum:8;
-    } PCIAGPStatus;
-
-/* Structure defining the PCI AGP command register contents */
-
-typedef struct {
-    uint    rate:3;
-    uint    rsvd1:1;
-    uint    fastWriteEnable:1;
-    uint    fourGBEnable:1;
-    uint    rsvd2:2;
-    uint    AGPEnable:1;
-    uint    SBAEnable:1;
-    uint    rsvd3:14;
-    uint    requestQueueDepth:8;
-    } PCIAGPCommand;
-
-/* AGP Capability structure */
-
-typedef struct {
-    PCICapsHeader   h;
-    ushort          majMin;
-    PCIAGPStatus    AGPStatus;
-    PCIAGPCommand   AGPCommand;
-    } PCIAGPCapability;
-
-/* Structure for obtaining the PCI IRQ routing information */
-
-typedef struct {
-    uchar   bus;
-    uchar   device;
-    uchar   linkA;
-    ushort  mapA;
-    uchar   linkB;
-    ushort  mapB;
-    uchar   linkC;
-    ushort  mapC;
-    uchar   linkD;
-    ushort  mapD;
-    uchar   slot;
-    uchar   reserved;
-    } PCIRouteInfo;
-
-typedef struct {
-    ushort          BufferSize;
-    PCIRouteInfo    *DataBuffer;
-    } PCIRoutingOptionsBuffer;
-
-#define NUM_PCI_REG                 (sizeof(PCIDeviceInfo) / 4) - 10
-#define PCI_BRIDGE_CLASS            0x06
-#define PCI_HOST_BRIDGE_SUBCLASS    0x00
-#define PCI_EARLY_VGA_CLASS         0x00
-#define PCI_EARLY_VGA_SUBCLASS      0x01
-#define PCI_DISPLAY_CLASS           0x03
-#define PCI_DISPLAY_VGA_SUBCLASS    0x00
-#define PCI_DISPLAY_XGA_SUBCLASS    0x01
-#define PCI_DISPLAY_OTHER_SUBCLASS  0x80
-#define PCI_MM_CLASS                0x04
-#define PCI_AUDIO_SUBCLASS          0x01
-
-/* Macros to detect specific classes of devices */
-
-#define PCI_IS_3DLABS_NONVGA_CLASS(pci) \
-   (((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_OTHER_SUBCLASS) \
- && ((pci)->VendorID == 0x3D3D || (pci)->VendorID == 0x104C))
-
-#define PCI_IS_DISPLAY_CLASS(pci) \
-   (((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_VGA_SUBCLASS) \
- || ((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_XGA_SUBCLASS) \
- || ((pci)->BaseClass == PCI_EARLY_VGA_CLASS && (pci)->SubClass == PCI_EARLY_VGA_SUBCLASS) \
- || PCI_IS_3DLABS_NONVGA_CLASS(pci))
-
-/* Function codes to pass to PCI_accessReg */
-
-#define PCI_READ_BYTE               0
-#define PCI_READ_WORD               1
-#define PCI_READ_DWORD              2
-#define PCI_WRITE_BYTE              3
-#define PCI_WRITE_WORD              4
-#define PCI_WRITE_DWORD             5
-
-/* Macros to read/write PCI registers. These assume a global PCI array
- * of device information.
- */
-
-#define PCI_readPCIRegB(index,device)   \
-    PCI_accessReg(index,0,0,&PCI[DeviceIndex[device]])
-
-#define PCI_readPCIRegW(index,device)   \
-    PCI_accessReg(index,0,1,&PCI[DeviceIndex[device]])
-
-#define PCI_readPCIRegL(index,device)   \
-    PCI_accessReg(index,0,2,&PCI[DeviceIndex[device]])
-
-#define PCI_writePCIRegB(index,value,device)    \
-    PCI_accessReg(index,value,3,&PCI[DeviceIndex[device]])
-
-#define PCI_writePCIRegW(index,value,device)    \
-    PCI_accessReg(index,value,4,&PCI[DeviceIndex[device]])
-
-#define PCI_writePCIRegL(index,value,device)    \
-    PCI_accessReg(index,value,5,&PCI[DeviceIndex[device]])
-
-#pragma pack()
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {                        /* Use "C" linkage when in C++ mode */
-#endif
-
-/* Function to determine the number of PCI devices in the system */
-
-int     _ASMAPI PCI_getNumDevices(void);
-
-/* Function to enumerate all device on the PCI bus */
-
-int     _ASMAPI PCI_enumerate(PCIDeviceInfo info[]);
-
-/* Function to access PCI configuration registers */
-
-ulong   _ASMAPI PCI_accessReg(int index,ulong value,int func,PCIDeviceInfo *info);
-
-/* Function to get PCI IRQ routing options for a card */
-
-int     _ASMAPI PCI_getIRQRoutingOptions(int numDevices,PCIRouteInfo *buffer);
-
-/* Function to re-route the PCI IRQ setting for a device */
-
-ibool   _ASMAPI PCI_setHardwareIRQ(PCIDeviceInfo *info,uint intPin,uint IRQ);
-
-/* Function to generate a special cyle on the specified PCI bus */
-
-void    _ASMAPI PCI_generateSpecialCyle(uint bus,ulong specialCycleData);
-
-/* Function to determine the size of a PCI base address register */
-
-ulong   _ASMAPI PCI_findBARSize(int bar,PCIDeviceInfo *pci);
-
-/* Function to read a block of PCI configuration space registers */
-
-void    _ASMAPI PCI_readRegBlock(PCIDeviceInfo *info,int index,void *dst,int count);
-
-/* Function to write a block of PCI configuration space registers */
-
-void    _ASMAPI PCI_writeRegBlock(PCIDeviceInfo *info,int index,void *src,int count);
-
-/* Function to return the 32-bit PCI BIOS entry point */
-
-ulong   _ASMAPI PCIBIOS_getEntry(void);
-
-#ifdef  __cplusplus
-}                                   /* End of "C" linkage for C++       */
-#endif
-
-#endif  /* __PCILIB_H */
diff --git a/board/MAI/bios_emulator/scitech/include/pm_help.h b/board/MAI/bios_emulator/scitech/include/pm_help.h
deleted file mode 100644
index 536a2baac5..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pm_help.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32, OS/2
-*
-* Description:  Include file for the SciTech Portability Manager 32-bit
-*               helper VxD for Windows 9x for and the 16-bit ring 0
-*               helper device driver for OS/2.
-*
-*               This file documents all the public services used by the
-*               SciTech Portability Manager library and SciTech Nucleus
-*               loader library.
-*
-****************************************************************************/
-
-#ifndef __PMHELP_H
-#define __PMHELP_H
-
-/* Include version information */
-
-#include "sdd/sddver.h"
-#define PMHELP_Major            SDD_RELEASE_MAJOR
-#define PMHELP_Minor            SDD_RELEASE_MINOR
-#define PMHELP_VERSION          ((PMHELP_Major << 8) | PMHELP_Minor)
-
-#ifdef  __OS2__
-
-/****************************************************************************
-* Public OS/2 Support functions
-****************************************************************************/
-
-#include "scitech.h"
-#include "nucleus/graphics.h"
-
-/* Name of device driver */
-
-#define PMHELP_NAME                 (PSZ)"sddhelp$"
-
-/* Main IOCTL function to talk to device driver */
-
-#define PMHELP_IOCTL                0x0080
-
-/* Macro definition for defining IOCTL function control codes for the SDDHELP
- * device driver for OS/2. Similar to that used for the DOS/Win32 version.
- */
-
-#define PMHELP_CTL_CODE(name,value) \
-    PMHELP_##name = value
-
-typedef enum {
-    /* Version function used by all drivers */
-    PMHELP_CTL_CODE(GETVER                      ,0x0001),
-    PMHELP_CTL_CODE(MAPPHYS                     ,0x0002),
-    PMHELP_CTL_CODE(ALLOCLOCKED                 ,0x0003),
-    PMHELP_CTL_CODE(FREELOCKED                  ,0x0004),
-    PMHELP_CTL_CODE(GETGDT32                    ,0x0005),
-    PMHELP_CTL_CODE(MALLOCSHARED                ,0x0007),
-    PMHELP_CTL_CODE(FREESHARED                  ,0x0008),
-    PMHELP_CTL_CODE(MAPTOPROCESS                ,0x0009),
-    PMHELP_CTL_CODE(FREEPHYS                    ,0x000A),
-    PMHELP_CTL_CODE(FLUSHTLB                    ,0x000B),
-    PMHELP_CTL_CODE(SAVECR4                     ,0x000C),
-    PMHELP_CTL_CODE(RESTORECR4                  ,0x000D),
-    PMHELP_CTL_CODE(READMSR                     ,0x000E),
-    PMHELP_CTL_CODE(WRITEMSR                    ,0x000F),
-    PMHELP_CTL_CODE(GETPHYSICALADDR             ,0x0010),
-    PMHELP_CTL_CODE(GETPHYSICALADDRRANGE        ,0x0011),
-    PMHELP_CTL_CODE(LOCKPAGES                   ,0x0012),
-    PMHELP_CTL_CODE(UNLOCKPAGES                 ,0x0013),
-    PMHELP_CTL_CODE(GETSHAREDEXP                ,0x0042),
-    PMHELP_CTL_CODE(SETSHAREDEXP                ,0x0043),
-    PMHELP_CTL_CODE(GETSTACKSWITCHRTN           ,0x0044),
-    PMHELP_CTL_CODE(GETBUILDNO                  ,0x0050),
-    } PMHELP_ctlCodes;
-
-#else
-
-/****************************************************************************
-* Public DOS/Windows Support functions
-****************************************************************************/
-
-#ifdef  DEVICE_MAIN
-#include <vtoolsc.h>
-#define PMHELP_Init_Order   (VDD_INIT_ORDER-1)
-#define RETURN_LONGS(n)     *p->dioc_bytesret = (n) * sizeof(ulong)
-#endif  /* DEVICE_MAIN */
-#include "scitech.h"
-#include "nucleus/graphics.h"
-
-/* We connect to the SDDHELP.VXD module if it is staticly loaded (as part
- * of SciTech Display Doctor), otherwise we dynamically load the PMHELP.VXD
- * public helper VxD.
- */
-
-#define PMHELP_DeviceID         0x0000
-#define SDDHELP_DeviceID        0x3DF8
-#define VXDLDR_DeviceID         0x0027
-#define SDDHELP_MODULE          "SDDHELP"
-#define SDDHELP_NAME            "SDDHELP.VXD"
-#define PMHELP_MODULE           "PMHELP"
-#define PMHELP_NAME             "PMHELP.VXD"
-#define PMHELP_DDBNAME          "pmhelp  "
-#define SDDHELP_MODULE_PATH     "\\\\.\\" SDDHELP_MODULE
-#define PMHELP_MODULE_PATH      "\\\\.\\" PMHELP_MODULE
-#define PMHELP_VXD_PATH         "\\\\.\\" PMHELP_NAME
-
-/* Macro definition for defining IOCTL function control codes for the PMHELP
- * device drivers for Windows 9x and NT. This macro is basically derived from
- * the CTL_CODE macro in the Windows 2000 DDK, but we hard code it here to
- * avoid having to #include any of the Windows 2000 DDK header files. We also
- * define both a 16-bit and 32-bit version of the control code within the same
- * macro to simplify future additions.
- *
- * Essentially the Win32 macro would normally expand to the following:
- *
- *  CTL_CODE(FILE_DEVICE_VIDEO,0x800+value,METHOD_BUFFERED,FILE_ANY_ACCESS)
- */
-
-#define PMHELP_CTL_CODE(name,value)                                             \
-    PMHELP_##name = value,                                                      \
-    PMHELP_##name##32 = ((0x23 << 16) | (0 << 14) | ((0x800+value) << 2) | (0))
-
-typedef enum {
-    /* Include all the control codes. We keep them in a separate header
-     * file so we can include them in multiple places to make this
-     * more versatile.
-     */
-    #include "pm_wctl.h"
-    } PMHELP_ctlCodes;
-
-/* For real mode VxD calls, we put the function number into the high
- * order word of EAX, and a value of 0x4FFF in AX. This allows our
- * VxD handler which is set up to handle Int 10's to recognise a native
- * PMHELP API call from a real mode DOS program.
- */
-
-#ifdef  REALMODE
-#define API_NUM(num)    (((ulong)(num) << 16) | 0x4FFF)
-#else
-#define API_NUM(num)    (num)
-#endif
-
-#endif  /* !__OS2__ */
-
-#endif  /* __PMHELP_H */
diff --git a/board/MAI/bios_emulator/scitech/include/pm_wctl.h b/board/MAI/bios_emulator/scitech/include/pm_wctl.h
deleted file mode 100644
index 20aa15e534..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pm_wctl.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32, OS/2
-*
-* Description:  Header file to define all the control codes for the DOS
-*               and Win32 device driver API's for calling from ring 3
-*               into the ring 0 device drivers.
-*
-****************************************************************************/
-
-/* Version function used by all drivers */
-PMHELP_CTL_CODE(GETVER                      ,0x0000),
-
-/* Functions used by obsolete 16-bit DOS TSR */
-PMHELP_CTL_CODE(RDREGB                      ,0x0003),
-PMHELP_CTL_CODE(WRREGB                      ,0x0004),
-PMHELP_CTL_CODE(RDREGW                      ,0x0005),
-PMHELP_CTL_CODE(WRREGW                      ,0x0006),
-PMHELP_CTL_CODE(RDREGL                      ,0x0008),
-PMHELP_CTL_CODE(WRREGL                      ,0x0009),
-
-/* Functions used by obsolete WinDirect */
-PMHELP_CTL_CODE(MAPPHYS                     ,0x000F),
-PMHELP_CTL_CODE(GETVESABUF                  ,0x0013),
-
-/* Functions used by PM library */
-PMHELP_CTL_CODE(DPMIINT86                   ,0x0014),
-PMHELP_CTL_CODE(INT86                       ,0x0015),
-PMHELP_CTL_CODE(INT86X                      ,0x0016),
-PMHELP_CTL_CODE(CALLREALMODE                ,0x0017),
-PMHELP_CTL_CODE(ALLOCLOCKED                 ,0x0018),
-PMHELP_CTL_CODE(FREELOCKED                  ,0x0019),
-PMHELP_CTL_CODE(ENABLELFBCOMB               ,0x001A),
-PMHELP_CTL_CODE(GETPHYSICALADDR             ,0x001B),
-PMHELP_CTL_CODE(MALLOCSHARED                ,0x001D),
-PMHELP_CTL_CODE(FREESHARED                  ,0x001F),
-PMHELP_CTL_CODE(LOCKDATAPAGES               ,0x0020),
-PMHELP_CTL_CODE(UNLOCKDATAPAGES             ,0x0021),
-PMHELP_CTL_CODE(LOCKCODEPAGES               ,0x0022),
-PMHELP_CTL_CODE(UNLOCKCODEPAGES             ,0x0023),
-PMHELP_CTL_CODE(GETCALLGATE                 ,0x0024),
-PMHELP_CTL_CODE(SETCNTPATH                  ,0x0025),
-PMHELP_CTL_CODE(GETPDB                      ,0x0026),
-PMHELP_CTL_CODE(FLUSHTLB                    ,0x0027),
-PMHELP_CTL_CODE(GETPHYSICALADDRRANGE        ,0x0028),
-PMHELP_CTL_CODE(ALLOCPAGE                   ,0x0029),
-PMHELP_CTL_CODE(FREEPAGE                    ,0x002A),
-PMHELP_CTL_CODE(ENABLERING3IOPL             ,0x002B),
-PMHELP_CTL_CODE(DISABLERING3IOPL            ,0x002C),
-PMHELP_CTL_CODE(GASETLOCALPATH              ,0x002D),
-PMHELP_CTL_CODE(GAGETEXPORTS                ,0x002E),
-PMHELP_CTL_CODE(GATHUNK                     ,0x002F),
-PMHELP_CTL_CODE(SETNUCLEUSPATH              ,0x0030),
diff --git a/board/MAI/bios_emulator/scitech/include/pmapi.h b/board/MAI/bios_emulator/scitech/include/pmapi.h
deleted file mode 100644
index 7ddace7080..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pmapi.h
+++ /dev/null
@@ -1,1148 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Header file for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#ifndef __PMAPI_H
-#define __PMAPI_H
-
-#include "scitech.h"
-#include "pcilib.h"
-#include "ztimerc.h"
-#if !defined(__WIN32_VXD__) && !defined(__OS2_VDD__) && !defined(__NT_DRIVER__)
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-/*--------------------------- Macros and Typedefs -------------------------*/
-
-/* You will need to define one of the following before you compile this
- * library for it to work correctly with the DOS extender that you are
- * using when compiling for extended DOS:
- *
- *      TNT         - Phar Lap TNT DOS Extender
- *      DOS4GW      - Rational DOS/4GW, DOS/4GW Pro, Causeway and PMODE/W
- *      DJGPP       - DJGPP port of GNU C++
- *
- * If none is specified, we will automatically determine which operating
- * system is being targetted and the following will be defined (provided by
- * scitech.h header file):
- *
- *      __MSDOS16__     - Default for 16 bit MSDOS mode
- *      __MSDOS32__     - Default for 32 bit MSDOS
- *      __WINDOWS16__   - Default for 16 bit Windows
- *      __WINDOWS32__   - Default for 32 bit Windows
- *
- * One of the following will be defined automatically for you to select
- * which memory model is in effect:
- *
- *      REALMODE    - 16 bit real mode (large memory model)
- *      PM286       - 16 protected mode (large memory model)
- *      PM386       - 32 protected mode (flat memory model)
- */
-
-#if defined(__UNIX__) && !defined(_MAX_PATH)
-#define _MAX_PATH 256
-#endif
-
-#if defined(TNT) || defined(DOSX) || defined(X32VM) || defined(DPMI32)      \
-    || defined(DOS4GW) || defined(DJGPP) || defined(__WINDOWS32__)          \
-    || defined(__MSDOS32__) || defined(__UNIX__) || defined(__WIN32_VXD__) \
-    || defined(__32BIT__) || defined(__SMX32__) || defined(__RTTARGET__)
-#define PM386
-#elif defined(DPMI16) || defined(__WINDOWS16__)
-#define PM286
-#else
-#define REALMODE
-#endif
-
-#pragma pack(1)
-
-/* Provide the typedefs for the PM_int386 functions, which issue native
- * interrupts in real or protected mode and can pass extended registers
- * around.
- */
-
-struct _PMDWORDREGS {
-    ulong   eax,ebx,ecx,edx,esi,edi,cflag;
-    };
-
-struct _PMWORDREGS {
-    ushort  ax,ax_hi;
-    ushort  bx,bx_hi;
-    ushort  cx,cx_hi;
-    ushort  dx,dx_hi;
-    ushort  si,si_hi;
-    ushort  di,di_hi;
-    ushort  cflag,cflag_hi;
-    };
-
-struct _PMBYTEREGS {
-    uchar   al, ah; ushort ax_hi;
-    uchar   bl, bh; ushort bx_hi;
-    uchar   cl, ch; ushort cx_hi;
-    uchar   dl, dh; ushort dx_hi;
-    };
-
-typedef union {
-    struct  _PMDWORDREGS e;
-    struct  _PMWORDREGS  x;
-    struct  _PMBYTEREGS  h;
-    } PMREGS;
-
-typedef struct {
-    ushort  es;
-    ushort  cs;
-    ushort  ss;
-    ushort  ds;
-    ushort  fs;
-    ushort  gs;
-    } PMSREGS;
-
-/* Provide definitions for the real mode register structures passed to
- * the PM_int86() and PM_int86x() routines. Note that we provide our own
- * functions to do this for 16-bit code that calls the PM_int386 functions.
- */
-
-typedef PMREGS  RMREGS;
-typedef PMSREGS RMSREGS;
-
-typedef struct {
-    long    edi;
-    long    esi;
-    long    ebp;
-    long    reserved;
-    long    ebx;
-    long    edx;
-    long    ecx;
-    long    eax;
-    short   flags;
-    short   es,ds,fs,gs,ip,cs,sp,ss;
-    } DPMI_regs;
-
-#ifdef  __MSDOS__
-/* Register structure passed to PM_VxDCall function */
-typedef struct {
-    ulong   eax;
-    ulong   ebx;
-    ulong   ecx;
-    ulong   edx;
-    ulong   esi;
-    ulong   edi;
-    ushort  ds,es;
-    } VXD_regs;
-#endif
-
-#define PM_MAX_DRIVE                3
-#define PM_MAX_PATH                 256
-#define PM_FILE_INVALID             (void*)0xFFFFFFFF
-
-/* Structure for generic directory traversal and management. Also the same
- * values are passed to PM_setFileAttr to change the file attributes.
- */
-
-typedef struct {
-    ulong   dwSize;
-    ulong   attrib;
-    ulong   sizeLo;
-    ulong   sizeHi;
-    char    name[PM_MAX_PATH];
-    } PM_findData;
-
-/* Macro to compute the byte offset of a field in a structure of type type */
-
-#define PM_FIELD_OFFSET(type,field) ((long)&(((type*)0)->field))
-
-/* Marcto to compute the address of the base of the structure given its type,
- * and an address of a field within the structure.
- */
-
-#define PM_CONTAINING_RECORD(address, type, field)      \
-    ((type*)(                                           \
-    (char*)(address) -                                  \
-    (char*)(&((type*)0)->field)))
-
-/* Flags stored in the PM_findData structure, and also values passed to
- * PM_setFileAttr to change the file attributes.
- */
-
-#define PM_FILE_NORMAL              0x00000000
-#define PM_FILE_READONLY            0x00000001
-#define PM_FILE_DIRECTORY           0x00000002
-#define PM_FILE_ARCHIVE             0x00000004
-#define PM_FILE_HIDDEN              0x00000008
-#define PM_FILE_SYSTEM              0x00000010
-
-/* Flags returned by the PM_splitpath function */
-
-#define PM_HAS_WILDCARDS 0x01
-#define PM_HAS_EXTENSION 0x02
-#define PM_HAS_FILENAME  0x04
-#define PM_HAS_DIRECTORY 0x08
-#define PM_HAS_DRIVE     0x10
-
-/* Structure passed to the PM_setFileTime functions */
-typedef struct {
-    short   sec;        /* Seconds */
-    short   min;        /* Minutes */
-    short   hour;       /* Hour (0--23) */
-    short   day;        /* Day of month (1--31) */
-    short   mon;        /* Month (0--11) */
-    short   year;       /* Year (calendar year minus 1900) */
-    } PM_time;
-
-/* Define a macro for creating physical base addresses from segment:offset */
-
-#define MK_PHYS(s,o)  (((ulong)(s) << 4) + (ulong)(o))
-
-/* Define the different types of modes supported. This is a global variable
- * that can be used to determine the type at runtime which will contain
- * one of these values.
- */
-
-typedef enum {
-    PM_realMode,
-    PM_286,
-    PM_386
-    } PM_mode_enum;
-
-/* Define types passed to PM_enableWriteCombine */
-
-#define PM_MTRR_UNCACHABLE  0
-#define PM_MTRR_WRCOMB      1
-#define PM_MTRR_WRTHROUGH   4
-#define PM_MTRR_WRPROT      5
-#define PM_MTRR_WRBACK      6
-#define PM_MTRR_MAX         6
-
-/* Error codes returned by PM_enableWriteCombine */
-
-#define PM_MTRR_ERR_OK                  0
-#define PM_MTRR_NOT_SUPPORTED           -1
-#define PM_MTRR_ERR_PARAMS              -2
-#define PM_MTRR_ERR_NOT_4KB_ALIGNED     -3
-#define PM_MTRR_ERR_BELOW_1MB           -4
-#define PM_MTRR_ERR_NOT_ALIGNED         -5
-#define PM_MTRR_ERR_OVERLAP             -6
-#define PM_MTRR_ERR_TYPE_MISMATCH       -7
-#define PM_MTRR_ERR_NONE_FREE           -8
-#define PM_MTRR_ERR_NOWRCOMB            -9
-#define PM_MTRR_ERR_NO_OS_SUPPORT       -10
-
-/* Values passed to the PM_DMACProgram function */
-
-#define PM_DMA_READ_ONESHOT     0x44    /* One-shot DMA read        */
-#define PM_DMA_WRITE_ONESHOT    0x48    /* One-shot DMA write       */
-#define PM_DMA_READ_AUTOINIT    0x54    /* Auto-init DMA read       */
-#define PM_DMA_WRITE_AUTOINIT   0x58    /* Auto-init DMA write      */
-
-/* Flags passed to suspend application callback */
-
-#define PM_DEACTIVATE       1
-#define PM_REACTIVATE       2
-
-/* Return codes that the application can return from the suspend application
- * callback registered with the PM library. See the MGL documentation for
- * more details.
- */
-#define PM_SUSPEND_APP      0
-#define PM_NO_SUSPEND_APP   1
-
-/****************************************************************************
-REMARKS:
-This enumeration defines the type values passed to the PM_agpReservePhysical
-function, to define how the physical memory mapping should be handled.
-
-The PM_agpUncached type indicates that the memory should be allocated as
-uncached memory.
-
-The PM_agpWriteCombine type indicates that write combining should be enabled
-for physical memory mapping. This is used for framebuffer write combing and
-speeds up direct framebuffer writes to the memory.
-
-The PM_agpIntelDCACHE type indicates that memory should come from the Intel
-i81x Display Cache (or DCACHE) memory pool. This flag is specific to the
-Intel i810 and i815 controllers, and should not be passed for any other
-controller type.
-
-HEADER:
-pmapi.h
-
-MEMBERS:
-PM_agpUncached      - Indicates that the memory should be uncached
-PM_agpWriteCombine  - Indicates that the memory should be write combined
-PM_agpIntelDCACHE   - Indicates that the memory should come from DCACHE pool
-****************************************************************************/
-typedef enum {
-    PM_agpUncached,
-    PM_agpWriteCombine,
-    PM_agpIntelDCACHE
-    } PM_agpMemoryType;
-
-/* Defines the size of an system memory page */
-
-#define PM_PAGE_SIZE        4096
-
-/* Type definition for a physical memory address */
-
-typedef unsigned long PM_physAddr;
-
-/* Define a bad physical address returned by map physical functions */
-
-#define PM_BAD_PHYS_ADDRESS 0xFFFFFFFF
-
-/* Type definition for the 12-byte lock handle for locking linear memory */
-
-typedef struct {
-    ulong   h[3];
-    } PM_lockHandle;
-
-/* 'C' calling conventions always       */
-
-#define PMAPI   _ASMAPI
-#define PMAPIP  _ASMAPIP
-
-/* Internal typedef to override DPMI_int86 handler */
-
-typedef ibool (PMAPIP DPMI_handler_t)(DPMI_regs *regs);
-void PMAPI DPMI_setInt10Handler(DPMI_handler_t handler);
-
-/* Type definitions for a window handle for console modes */
-
-#if     defined(__DRIVER__) || defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-typedef void        *PM_HWND;   /* Pointer for portable drivers         */
-typedef void        *PM_MODULE; /* Module handle for portable drivers   */
-#elif   defined(__WINDOWS__)
-#ifdef  DECLARE_HANDLE
-typedef HWND        PM_HWND;    /* Real window handle                   */
-typedef HINSTANCE   PM_MODULE;  /* Win32 DLL handle                     */
-#else
-typedef void        *PM_HWND;   /* Place holder if windows.h not included */
-typedef void        *PM_MODULE; /* Place holder if windows.h not included */
-#endif
-#elif   defined(__USE_X11__)
-typedef struct {
-    Window      *window;
-    Display     *display;
-    } PM_HWND;                  /* X11 window handle */
-#elif   defined(__OS2__)
-typedef void    *PM_HWND;
-typedef void    *PM_MODULE;
-#elif   defined(__LINUX__)
-typedef int     PM_HWND;        /* Console id for fullscreen Linux */
-typedef void    *PM_MODULE;
-#elif   defined(__QNX__)
-typedef int     PM_HWND;        /* Console id for fullscreen QNX */
-typedef void    *PM_MODULE;
-#elif   defined(__RTTARGET__)
-typedef int     PM_HWND;        /* Placeholder for RTTarget-32 */
-typedef void    *PM_MODULE;
-#elif   defined(__REALDOS__)
-typedef int     PM_HWND;        /* Placeholder for fullscreen DOS */
-typedef void    *PM_MODULE;     /* Placeholder for fullscreen DOS */
-#elif   defined(__SMX32__)
-typedef int     PM_HWND;        /* Placeholder for fullscreen SMX */
-typedef void    *PM_MODULE;
-#elif   defined(__SNAP__)
-typedef void    *PM_HWND;
-typedef void    *PM_MODULE;
-#else
-#error  PM library not ported to this platform yet!
-#endif
-
-/* Type definition for code pointers */
-
-typedef void (*__codePtr)();
-
-/* Type definition for a C based interrupt handler */
-
-typedef void (PMAPIP PM_intHandler)(void);
-typedef ibool (PMAPIP PM_irqHandler)(void);
-
-/* Hardware IRQ handle used to save and restore the hardware IRQ */
-
-typedef void *PM_IRQHandle;
-
-/* Type definition for the fatal cleanup handler */
-
-typedef void (PMAPIP PM_fatalCleanupHandler)(void);
-
-/* Type defifinition for save state callback function */
-
-typedef int (PMAPIP PM_saveState_cb)(int flags);
-
-/* Type definintion for enum write combined callback function */
-
-typedef void (PMAPIP PM_enumWriteCombine_t)(ulong base,ulong length,uint type);
-
-/* Structure defining all the PM API functions as exported to
- * the binary portable DLL's.
- */
-
-typedef struct {
-    ulong   dwSize;
-    int     (PMAPIP PM_getModeType)(void);
-    void *  (PMAPIP PM_getBIOSPointer)(void);
-    void *  (PMAPIP PM_getA0000Pointer)(void);
-    void *  (PMAPIP PM_mapPhysicalAddr)(ulong base,ulong limit,ibool isCached);
-    void *  (PMAPIP PM_mallocShared)(long size);
-    void *  reserved1;
-    void    (PMAPIP PM_freeShared)(void *ptr);
-    void *  (PMAPIP PM_mapToProcess)(void *linear,ulong limit);
-    void *  (PMAPIP PM_mapRealPointer)(uint r_seg,uint r_off);
-    void *  (PMAPIP PM_allocRealSeg)(uint size,uint *r_seg,uint *r_off);
-    void    (PMAPIP PM_freeRealSeg)(void *mem);
-    void *  (PMAPIP PM_allocLockedMem)(uint size,ulong *physAddr,ibool contiguous,ibool below16Meg);
-    void    (PMAPIP PM_freeLockedMem)(void *p,uint size,ibool contiguous);
-    void    (PMAPIP PM_callRealMode)(uint seg,uint off, RMREGS *regs,RMSREGS *sregs);
-    int     (PMAPIP PM_int86)(int intno, RMREGS *in, RMREGS *out);
-    int     (PMAPIP PM_int86x)(int intno, RMREGS *in, RMREGS *out,RMSREGS *sregs);
-    void    (PMAPIP DPMI_int86)(int intno, DPMI_regs *regs);
-    void    (PMAPIP PM_availableMemory)(ulong *physical,ulong *total);
-    void *  (PMAPIP PM_getVESABuf)(uint *len,uint *rseg,uint *roff);
-    long    (PMAPIP PM_getOSType)(void);
-    void    (PMAPIP PM_fatalError)(const char *msg);
-    void    (PMAPIP PM_setBankA)(int bank);
-    void    (PMAPIP PM_setBankAB)(int bank);
-    void    (PMAPIP PM_setCRTStart)(int x,int y,int waitVRT);
-    char *  (PMAPIP PM_getCurrentPath)(char *path,int maxLen);
-    const char * (PMAPIP PM_getVBEAFPath)(void);
-    const char * (PMAPIP PM_getNucleusPath)(void);
-    const char * (PMAPIP PM_getNucleusConfigPath)(void);
-    const char * (PMAPIP PM_getUniqueID)(void);
-    const char * (PMAPIP PM_getMachineName)(void);
-    ibool   (PMAPIP VF_available)(void);
-    void *  (PMAPIP VF_init)(ulong baseAddr,int bankSize,int codeLen,void *bankFunc);
-    void    (PMAPIP VF_exit)(void);
-    PM_HWND (PMAPIP PM_openConsole)(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen);
-    int     (PMAPIP PM_getConsoleStateSize)(void);
-    void    (PMAPIP PM_saveConsoleState)(void *stateBuf,PM_HWND hwndConsole);
-    void    (PMAPIP PM_restoreConsoleState)(const void *stateBuf,PM_HWND hwndConsole);
-    void    (PMAPIP PM_closeConsole)(PM_HWND hwndConsole);
-    void    (PMAPIP PM_setOSCursorLocation)(int x,int y);
-    void    (PMAPIP PM_setOSScreenWidth)(int width,int height);
-    int     (PMAPIP PM_enableWriteCombine)(ulong base,ulong length,uint type);
-    void    (PMAPIP PM_backslash)(char *filename);
-    int     (PMAPIP PM_lockDataPages)(void *p,uint len,PM_lockHandle *lockHandle);
-    int     (PMAPIP PM_unlockDataPages)(void *p,uint len,PM_lockHandle *lockHandle);
-    int     (PMAPIP PM_lockCodePages)(__codePtr p,uint len,PM_lockHandle *lockHandle);
-    int     (PMAPIP PM_unlockCodePages)(__codePtr p,uint len,PM_lockHandle *lockHandle);
-    ibool   (PMAPIP PM_setRealTimeClockHandler)(PM_intHandler ih,int frequency);
-    void    (PMAPIP PM_setRealTimeClockFrequency)(int frequency);
-    void    (PMAPIP PM_restoreRealTimeClockHandler)(void);
-    ibool   (PMAPIP PM_doBIOSPOST)(ushort axVal,ulong BIOSPhysAddr,void *BIOSPtr,ulong BIOSLen);
-    char    (PMAPIP PM_getBootDrive)(void);
-    void    (PMAPIP PM_freePhysicalAddr)(void *ptr,ulong limit);
-    uchar   (PMAPIP PM_inpb)(int port);
-    ushort  (PMAPIP PM_inpw)(int port);
-    ulong   (PMAPIP PM_inpd)(int port);
-    void    (PMAPIP PM_outpb)(int port,uchar val);
-    void    (PMAPIP PM_outpw)(int port,ushort val);
-    void    (PMAPIP PM_outpd)(int port,ulong val);
-    void *  reserved2;
-    void    (PMAPIP PM_setSuspendAppCallback)(PM_saveState_cb saveState);
-    ibool   (PMAPIP PM_haveBIOSAccess)(void);
-    int     (PMAPIP PM_kbhit)(void);
-    int     (PMAPIP PM_getch)(void);
-    ibool   (PMAPIP PM_findBPD)(const char *dllname,char *bpdpath);
-    ulong   (PMAPIP PM_getPhysicalAddr)(void *p);
-    void    (PMAPIP PM_sleep)(ulong milliseconds);
-    int     (PMAPIP PM_getCOMPort)(int port);
-    int     (PMAPIP PM_getLPTPort)(int port);
-    PM_MODULE (PMAPIP PM_loadLibrary)(const char *szDLLName);
-    void *  (PMAPIP PM_getProcAddress)(PM_MODULE hModule,const char *szProcName);
-    void    (PMAPIP PM_freeLibrary)(PM_MODULE hModule);
-    int     (PMAPIP PCI_enumerate)(PCIDeviceInfo info[]);
-    ulong   (PMAPIP PCI_accessReg)(int index,ulong value,int func,PCIDeviceInfo *info);
-    ibool   (PMAPIP PCI_setHardwareIRQ)(PCIDeviceInfo *info,uint intPin,uint IRQ);
-    void    (PMAPIP PCI_generateSpecialCyle)(uint bus,ulong specialCycleData);
-    void *  reserved3;
-    ulong   (PMAPIP PCIBIOS_getEntry)(void);
-    uint    (PMAPIP CPU_getProcessorType)(void);
-    ibool   (PMAPIP CPU_haveMMX)(void);
-    ibool   (PMAPIP CPU_have3DNow)(void);
-    ibool   (PMAPIP CPU_haveSSE)(void);
-    ibool   (PMAPIP CPU_haveRDTSC)(void);
-    ulong   (PMAPIP CPU_getProcessorSpeed)(ibool accurate);
-    void    (PMAPIP ZTimerInit)(void);
-    void    (PMAPIP LZTimerOn)(void);
-    ulong   (PMAPIP LZTimerLap)(void);
-    void    (PMAPIP LZTimerOff)(void);
-    ulong   (PMAPIP LZTimerCount)(void);
-    void    (PMAPIP LZTimerOnExt)(LZTimerObject *tm);
-    ulong   (PMAPIP LZTimerLapExt)(LZTimerObject *tm);
-    void    (PMAPIP LZTimerOffExt)(LZTimerObject *tm);
-    ulong   (PMAPIP LZTimerCountExt)(LZTimerObject *tm);
-    void    (PMAPIP ULZTimerOn)(void);
-    ulong   (PMAPIP ULZTimerLap)(void);
-    void    (PMAPIP ULZTimerOff)(void);
-    ulong   (PMAPIP ULZTimerCount)(void);
-    ulong   (PMAPIP ULZReadTime)(void);
-    ulong   (PMAPIP ULZElapsedTime)(ulong start,ulong finish);
-    void    (PMAPIP ULZTimerResolution)(ulong *resolution);
-    void *  (PMAPIP PM_findFirstFile)(const char *filename,PM_findData *findData);
-    ibool   (PMAPIP PM_findNextFile)(void *handle,PM_findData *findData);
-    void    (PMAPIP PM_findClose)(void *handle);
-    void    (PMAPIP PM_makepath)(char *p,const char *drive,const char *dir,const char *name,const char *ext);
-    int     (PMAPIP PM_splitpath)(const char *fn,char *drive,char *dir,char *name,char *ext);
-    ibool   (PMAPIP PM_driveValid)(char drive);
-    void    (PMAPIP PM_getdcwd)(int drive,char *dir,int len);
-    void    (PMAPIP PM_setFileAttr)(const char *filename,uint attrib);
-    ibool   (PMAPIP PM_mkdir)(const char *filename);
-    ibool   (PMAPIP PM_rmdir)(const char *filename);
-    uint    (PMAPIP PM_getFileAttr)(const char *filename);
-    ibool   (PMAPIP PM_getFileTime)(const char *filename,ibool gmtTime,PM_time *time);
-    ibool   (PMAPIP PM_setFileTime)(const char *filename,ibool gmtTime,PM_time *time);
-    char *  (PMAPIP CPU_getProcessorName)(void);
-    int     (PMAPIP PM_getVGAStateSize)(void);
-    void    (PMAPIP PM_saveVGAState)(void *stateBuf);
-    void    (PMAPIP PM_restoreVGAState)(const void *stateBuf);
-    void    (PMAPIP PM_vgaBlankDisplay)(void);
-    void    (PMAPIP PM_vgaUnblankDisplay)(void);
-    void    (PMAPIP PM_blockUntilTimeout)(ulong milliseconds);
-    void    (PMAPIP _PM_add64)(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-    void    (PMAPIP _PM_sub64)(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-    void    (PMAPIP _PM_mul64)(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-    void    (PMAPIP _PM_div64)(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-    void    (PMAPIP _PM_shr64)(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-    void    (PMAPIP _PM_sar64)(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-    void    (PMAPIP _PM_shl64)(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-    void    (PMAPIP _PM_neg64)(u32 a_low,s32 a_high,__i64 *result);
-    ulong   (PMAPIP PCI_findBARSize)(int bar,PCIDeviceInfo *pci);
-    void    (PMAPIP PCI_readRegBlock)(PCIDeviceInfo *info,int index,void *dst,int count);
-    void    (PMAPIP PCI_writeRegBlock)(PCIDeviceInfo *info,int index,void *src,int count);
-    void    (PMAPIP PM_flushTLB)(void);
-    void    (PMAPIP PM_useLocalMalloc)(void * (*malloc)(size_t size),void * (*calloc)(size_t nelem,size_t size),void * (*realloc)(void *ptr,size_t size),void (*free)(void *p));
-    void *  (PMAPIP PM_malloc)(size_t size);
-    void *  (PMAPIP PM_calloc)(size_t nelem,size_t size);
-    void *  (PMAPIP PM_realloc)(void *ptr,size_t size);
-    void    (PMAPIP PM_free)(void *p);
-    ibool   (PMAPIP PM_getPhysicalAddrRange)(void *p,ulong length,ulong *physAddress);
-    void *  (PMAPIP PM_allocPage)(ibool locked);
-    void    (PMAPIP PM_freePage)(void *p);
-    ulong   (PMAPIP PM_agpInit)(void);
-    void    (PMAPIP PM_agpExit)(void);
-    ibool   (PMAPIP PM_agpReservePhysical)(ulong numPages,int type,void **physContext,PM_physAddr *physAddr);
-    ibool   (PMAPIP PM_agpReleasePhysical)(void *physContext);
-    ibool   (PMAPIP PM_agpCommitPhysical)(void *physContext,ulong numPages,ulong startOffset,PM_physAddr *physAddr);
-    ibool   (PMAPIP PM_agpFreePhysical)(void *physContext,ulong numPages,ulong startOffset);
-    int     (PMAPIP PCI_getNumDevices)(void);
-    void    (PMAPIP PM_setLocalBPDPath)(const char *path);
-    void *  (PMAPIP PM_loadDirectDraw)(int device);
-    void    (PMAPIP PM_unloadDirectDraw)(int device);
-    PM_HWND (PMAPIP PM_getDirectDrawWindow)(void);
-    void    (PMAPIP PM_doSuspendApp)(void);
-    } PM_imports;
-
-#pragma pack()
-
-/*---------------------------- Global variables ---------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            /* Use "C" linkage when in C++ mode */
-#endif
-
-#ifdef  __WIN32_VXD__
-#define VESA_BUF_SIZE 1024
-extern uchar *_PM_rmBufAddr;
-#endif
-
-/* {secret} Pointer to global exports structure.
- * Should not be used by application programs.
- */
-extern PM_imports _VARAPI _PM_imports;
-
-/* {secret} */
-extern void * (*__PM_malloc)(size_t size);
-/* {secret} */
-extern void * (*__PM_calloc)(size_t nelem,size_t size);
-/* {secret} */
-extern void * (*__PM_realloc)(void *ptr,size_t size);
-/* {secret} */
-extern void (*__PM_free)(void *p);
-
-/*--------------------------- Function Prototypes -------------------------*/
-
-/* Routine to initialise the host side PM library. Note used from DLL's */
-
-void    PMAPI PM_init(void);
-
-/* Routine to return either PM_realMode, PM_286 or PM_386 */
-
-int     PMAPI PM_getModeType(void);
-
-/* Routine to return a selector to the BIOS data area at segment 0x40 */
-
-void *  PMAPI PM_getBIOSPointer(void);
-
-/* Routine to return a linear pointer to the VGA frame buffer memory */
-
-void *  PMAPI PM_getA0000Pointer(void);
-
-/* Routines to map/free physical memory into the current DS segment. In
- * some environments (32-bit DOS is one), after the mapping has been
- * allocated, it cannot be freed. Hence you should only allocate the
- * mapping once and cache the value for use by other parts of your
- * application. If the mapping cannot be createed, this function will
- * return a NULL pointer.
- *
- * This routine will also work for memory addresses below 1Mb, but the
- * mapped address cannot cross the 1Mb boundary.
- */
-
-void *  PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached);
-void    PMAPI PM_freePhysicalAddr(void *ptr,ulong limit);
-
-/* Routine to determine the physical address of a linear address. It is
- * up to the caller to ensure the entire address range for a linear
- * block of memory is page aligned if that is required.
- */
-
-ulong   PMAPI PM_getPhysicalAddr(void *p);
-ibool   PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress);
-
-/* Routines for memory allocation. By default these functions use the regular
- * C runtime library malloc/free functions, but you can use the
- * PM_useLocalMalloc function to override the default memory allocator with
- * your own memory allocator. This will ensure that all memory allocation
- * used by SciTech products will use your overridden memory allocator
- * functions.
- *
- * Note that BPD files automatically map the C runtime library
- * malloc/calloc/realloc/free calls from inside the BPD to the PM library
- * versions by default.
- */
-
-void    PMAPI PM_useLocalMalloc(void * (*malloc)(size_t size),void * (*calloc)(size_t nelem,size_t size),void * (*realloc)(void *ptr,size_t size),void (*free)(void *p));
-void *  PMAPI PM_malloc(size_t size);
-void *  PMAPI PM_calloc(size_t nelem,size_t size);
-void *  PMAPI PM_realloc(void *ptr,size_t size);
-void    PMAPI PM_free(void *p);
-
-/* Routine to allocate a memory block in the global shared region that
- * is common to all tasks and accessible from ring 0 code.
- */
-
-void *  PMAPI PM_mallocShared(long size);
-
-/* Routine to free the allocated shared memory block */
-
-void    PMAPI PM_freeShared(void *ptr);
-
-/* Attach a previously allocated linear mapping to a new process */
-
-void *  PMAPI PM_mapToProcess(void *linear,ulong limit);
-
-/* Macros to extract byte, word and long values from a char pointer */
-
-#define PM_getByte(p)       *((volatile uchar*)(p))
-#define PM_getWord(p)       *((volatile ushort*)(p))
-#define PM_getLong(p)       *((volatile ulong*)(p))
-#define PM_setByte(p,v)     PM_getByte(p) = (v)
-#define PM_setWord(p,v)     PM_getWord(p) = (v)
-#define PM_setLong(p,v)     PM_getLong(p) = (v)
-
-/* Routine for accessing a low 1Mb memory block. You dont need to free this
- * pointer, but in 16 bit protected mode the selector allocated will be
- * re-used the next time this routine is called.
- */
-
-void *  PMAPI PM_mapRealPointer(uint r_seg,uint r_off);
-
-/* Routine to allocate a block of conventional memory below the 1Mb
- * limit so that it can be accessed from real mode. Ensure that you free
- * the segment when you are done with it.
- *
- * This routine returns a selector and offset to the segment that has been
- * allocated, and also returns the real mode segment and offset which can
- * be passed to real mode routines. Will return 0 if memory could not be
- * allocated.
- *
- * Please note that with some DOS extenders, memory allocated with the
- * following function cannot be freed, hence it will be allocated for the
- * life of your program. Thus if you need to call a bunch of different
- * real-mode routines in your program, allocate a single large buffer at
- * program startup that can be re-used throughout the program execution.
- */
-
-void *  PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off);
-void    PMAPI PM_freeRealSeg(void *mem);
-
-/* Routine to allocate a block of locked memory, and return both the
- * linear and physical addresses of the memory. You should always
- * allocate locked memory blocks in page sized chunks (ie: 4K on IA32).
- * If the memory is not contiguous, you will need to use the
- * PM_getPhysicalAddr function to get the physical address of linear
- * pages within the memory block (the returned physical address will be
- * for the first address in the memory block only).
- */
-
-void *  PMAPI PM_allocLockedMem(uint size,ulong *physAddr,ibool contiguous,ibool below16Meg);
-void    PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous);
-
-/* Routine to allocate and free paged sized blocks of shared memory.
- * Addressable from all processes, but not from a ring 0 context
- * under OS/2. Note that under OS/2 PM_mapSharedPages must be called
- * to map the memory blocks into the shared memory address space
- * of each connecting process.
- */
-
-void *  PMAPI PM_allocPage(ibool locked);
-void    PMAPI PM_freePage(void *p);
-#ifdef __OS2__
-void    PMAPI PM_mapSharedPages(void);
-#endif
-
-/* Routine to return true if we have access to the BIOS on the host OS */
-
-ibool   PMAPI PM_haveBIOSAccess(void);
-
-/* Routine to call a real mode assembly language procedure. Register
- * values are passed in and out in the 'regs' and 'sregs' structures. We
- * do not provide any method of copying data from the protected mode stack
- * to the real mode stack, so if you need to pass data to real mode, you will
- * need to write a real mode assembly language hook to recieve the values
- * in registers, and to pass the data through a real mode block allocated
- * with the PM_allocRealSeg() routine.
- */
-
-void    PMAPI PM_callRealMode(uint seg,uint off, RMREGS *regs,RMSREGS *sregs);
-
-/* Routines to generate real mode interrupts using the same interface that
- * is used by int86() and int86x() in realmode. This routine is need to
- * call certain BIOS and DOS functions that are not supported by some
- * DOS extenders. No translation is done on any of the register values,
- * so they must be correctly set up and translated by the calling program.
- *
- * Normally the DOS extenders will allow you to use the normal int86()
- * function directly and will pass on unhandled calls to real mode to be
- * handled by the real mode handler. However calls to int86x() with real
- * mode segment values to be loaded will cause a GPF if used with the
- * standard int86x(), so you should use these routines if you know you
- * want to call a real mode handler.
- */
-
-int     PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out);
-int     PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,RMSREGS *sregs);
-
-/* Routine to generate a real mode interrupt. This is identical to the
- * above function, but takes a DPMI_regs structure for the registers
- * which has a lot more information. It is only available from 32-bit
- * protected mode.
- */
-
-void    PMAPI DPMI_int86(int intno, DPMI_regs *regs);
-
-/* Function to return the amount of available physical and total memory.
- * The results of this function are *only* valid before you have made any
- * calls to malloc() and free(). If you need to keep track of exactly how
- * much memory is currently allocated, you need to call this function to
- * get the total amount of memory available and then keep track of
- * the available memory every time you call malloc() and free().
- */
-
-void    PMAPI PM_availableMemory(ulong *physical,ulong *total);
-
-/* Return the address of a global VESA real mode transfer buffer for use
- * by applications.
- */
-
-void *  PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff);
-
-/* Handle fatal error conditions */
-
-void    PMAPI PM_fatalError(const char *msg);
-
-/* Function to set a cleanup error handler called when PM_fatalError
- * is called. This allows us to the console back into a normal state
- * if we get a failure from deep inside a BPD file. This function is
- * not exported to BPD files, and is only used by code compiled for the
- * OS.
- */
-
-void    PMAPI PM_setFatalErrorCleanup(PM_fatalCleanupHandler cleanup);
-
-/* Return the OS type flag as defined in <drvlib/os/os.h> */
-
-long    PMAPI PM_getOSType(void);
-
-/* Functions to set a VBE bank via an Int 10h */
-
-void    PMAPI PM_setBankA(int bank);
-void    PMAPI PM_setBankAB(int bank);
-void    PMAPI PM_setCRTStart(int x,int y,int waitVRT);
-
-/* Return the current working directory */
-
-char *  PMAPI PM_getCurrentPath(char *path,int maxLen);
-
-/* Return paths to the VBE/AF and Nucleus directories */
-
-const char * PMAPI PM_getVBEAFPath(void);
-const char * PMAPI PM_getNucleusPath(void);
-const char * PMAPI PM_getNucleusConfigPath(void);
-
-/* Find the path to a binary portable DLL */
-
-void    PMAPI PM_setLocalBPDPath(const char *path);
-ibool   PMAPI PM_findBPD(const char *dllname,char *bpdpath);
-
-/* Returns the drive letter of the boot drive for DOS, OS/2 and Windows */
-
-char    PMAPI PM_getBootDrive(void);
-
-/* Return a network unique machine identifier as a string */
-
-const char * PMAPI PM_getUniqueID(void);
-
-/* Return the network machine name as a string */
-
-const char * PMAPI PM_getMachineName(void);
-
-/* Functions to install and remove the virtual linear framebuffer
- * emulation code. For unsupported DOS extenders and when running under
- * a DPMI host like Windows or OS/2, this function will return a NULL.
- */
-
-ibool   PMAPI VF_available(void);
-void *  PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc);
-void    PMAPI VF_exit(void);
-
-/* Functions to wait for a keypress and read a key for command line
- * environments such as DOS, Win32 console and Unix.
- */
-
-int     PMAPI PM_kbhit(void);
-int     PMAPI PM_getch(void);
-
-/* Functions to create either a fullscreen or windowed console on the
- * desktop, and to allow the resolution of fullscreen consoles to be
- * changed on the fly without closing the console. For non-windowed
- * environments (such as a Linux or OS/2 fullscreen console), these
- * functions enable console graphics mode and restore console text mode.
- *
- * The suspend application callback is used to allow the application to
- * save the state of the fullscreen console mode to allow temporary
- * switching to another console or back to the regular GUI desktop. It
- * is also called to restore the fullscreen graphics state after the
- * fullscreen console regains the focus.
- *
- * The device parameter allows for the console to be opened on a different
- * display controllers (0 is always the primary controller).
- */
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen);
-int     PMAPI PM_getConsoleStateSize(void);
-void    PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole);
-void    PMAPI PM_setSuspendAppCallback(PM_saveState_cb saveState);
-void    PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole);
-void    PMAPI PM_closeConsole(PM_HWND hwndConsole);
-
-/* Functions to modify OS console information */
-
-void    PMAPI PM_setOSCursorLocation(int x,int y);
-void    PMAPI PM_setOSScreenWidth(int width,int height);
-
-/* Function to emable Intel PPro/PII write combining */
-
-int     PMAPI PM_enableWriteCombine(ulong base,ulong length,uint type);
-int     PMAPI PM_enumWriteCombine(PM_enumWriteCombine_t callback);
-
-/* Function to add a path separator to the end of a filename (if not present) */
-
-void    PMAPI PM_backslash(char *filename);
-
-/* Routines to lock and unlock regions of memory under a virtual memory
- * environment. These routines _must_ be used to lock all hardware
- * and mouse interrupt handlers installed, _AND_ any global data that
- * these handler manipulate, so that they will always be present in memory
- * to handle the incoming interrupts.
- *
- * Note that it is important to call the correct routine depending on
- * whether the area being locked is code or data, so that under 32 bit
- * PM we will get the selector value correct.
- */
-
-int     PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lockHandle);
-int     PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lockHandle);
-int     PMAPI PM_lockCodePages(__codePtr p,uint len,PM_lockHandle *lockHandle);
-int     PMAPI PM_unlockCodePages(__codePtr p,uint len,PM_lockHandle *lockHandle);
-
-/* Routines to install and remove Real Time Clock interrupt handlers. The
- * frequency of the real time clock can be changed by calling
- * PM_setRealTimeClockFrequeny, and the value can be any power of 2 value
- * from 2Hz to 8192Hz.
- *
- * Note that you _must_ lock the memory containing the interrupt
- * handlers with the PM_lockPages() function otherwise you may encounter
- * problems in virtual memory environments.
- *
- * NOTE: User space versions of the PM library should fail these functions.
- */
-
-ibool   PMAPI PM_setRealTimeClockHandler(PM_intHandler ih,int frequency);
-void    PMAPI PM_setRealTimeClockFrequency(int frequency);
-void    PMAPI PM_restoreRealTimeClockHandler(void);
-
-/* Routines to install and remove hardware interrupt handlers.
- *
- * Note that you _must_ lock the memory containing the interrupt
- * handlers with the PM_lockPages() function otherwise you may encounter
- * problems in virtual memory environments.
- *
- * NOTE: User space versions of the PM library should fail these functions.
- */
-
-PM_IRQHandle PMAPI PM_setIRQHandler(int IRQ,PM_irqHandler ih);
-void    PMAPI PM_restoreIRQHandler(PM_IRQHandle irqHandle);
-
-/* Functions to program DMA using the legacy ISA DMA controller */
-
-void    PMAPI PM_DMACEnable(int channel);
-void    PMAPI PM_DMACDisable(int channel);
-void    PMAPI PM_DMACProgram(int channel,int mode,ulong bufferPhys,int count);
-ulong   PMAPI PM_DMACPosition(int channel);
-
-/* Function to post secondary graphics controllers using the BIOS */
-
-ibool   PMAPI PM_doBIOSPOST(ushort axVal,ulong BIOSPhysAddr,void *mappedBIOS,ulong BIOSLen);
-
-/* Function to init the AGP functions and return the AGP aperture size in MB */
-
-ulong   PMAPI PM_agpInit(void);
-void    PMAPI PM_agpExit(void);
-
-/* Functions to reserve and release physical AGP memory ranges */
-
-ibool   PMAPI PM_agpReservePhysical(ulong numPages,int type,void **physContext,PM_physAddr *physAddr);
-ibool   PMAPI PM_agpReleasePhysical(void *physContext);
-
-/* Functions to commit and free physical AGP memory ranges */
-
-ibool   PMAPI PM_agpCommitPhysical(void *physContext,ulong numPages,ulong startOffset,PM_physAddr *physAddr);
-ibool   PMAPI PM_agpFreePhysical(void *physContext,ulong numPages,ulong startOffset);
-
-/* Functions to do I/O port manipulation directly from C code. These
- * functions are portable and will work on any processor architecture
- * to access I/O space registers on PCI devices.
- */
-
-uchar   PMAPI PM_inpb(int port);
-ushort  PMAPI PM_inpw(int port);
-ulong   PMAPI PM_inpd(int port);
-void    PMAPI PM_outpb(int port,uchar val);
-void    PMAPI PM_outpw(int port,ushort val);
-void    PMAPI PM_outpd(int port,ulong val);
-
-/* Functions to determine the I/O port locations for COM and LPT ports.
- * The functions are zero based, so for COM1 or LPT1 pass in a value of 0,
- * for COM2 or LPT2 pass in a value of 1 etc.
- */
-
-int     PMAPI PM_getCOMPort(int port);
-int     PMAPI PM_getLPTPort(int port);
-
-/* Internal functions that need prototypes */
-
-void    PMAPI _PM_getRMvect(int intno, long *realisr);
-void    PMAPI _PM_setRMvect(int intno, long realisr);
-void    PMAPI _PM_freeMemoryMappings(void);
-
-/* Function to override the default debug log file location */
-
-void    PMAPI PM_setDebugLog(const char *logFilePath);
-
-/* Function to put the process to sleep for the specified milliseconds */
-
-void    PMAPI PM_sleep(ulong milliseconds);
-
-/* Function to block until 'milliseconds' have passed since last call */
-
-void    PMAPI PM_blockUntilTimeout(ulong milliseconds);
-
-/* Functions for directory traversal and management */
-
-void *  PMAPI PM_findFirstFile(const char *filename,PM_findData *findData);
-ibool   PMAPI PM_findNextFile(void *handle,PM_findData *findData);
-void    PMAPI PM_findClose(void *handle);
-void    PMAPI PM_makepath(char *p,const char *drive,const char *dir,const char *name,const char *ext);
-int     PMAPI PM_splitpath(const char *fn,char *drive,char *dir,char *name,char *ext);
-ibool   PMAPI PM_driveValid(char drive);
-void    PMAPI PM_getdcwd(int drive,char *dir,int len);
-uint    PMAPI PM_getFileAttr(const char *filename);
-void    PMAPI PM_setFileAttr(const char *filename,uint attrib);
-ibool   PMAPI PM_getFileTime(const char *filename,ibool gmTime,PM_time *time);
-ibool   PMAPI PM_setFileTime(const char *filename,ibool gmTime,PM_time *time);
-ibool   PMAPI PM_mkdir(const char *filename);
-ibool   PMAPI PM_rmdir(const char *filename);
-
-/* Functions to handle loading OS specific shared libraries */
-
-PM_MODULE PMAPI PM_loadLibrary(const char *szDLLName);
-void *  PMAPI PM_getProcAddress(PM_MODULE hModule,const char *szProcName);
-void    PMAPI PM_freeLibrary(PM_MODULE hModule);
-
-/* Functions and macros for 64-bit arithmetic */
-
-void    PMAPI _PM_add64(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-void    PMAPI _PM_sub64(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-void    PMAPI _PM_mul64(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-void    PMAPI _PM_div64(u32 a_low,s32 a_high,u32 b_low,s32 b_high,__i64 *result);
-void    PMAPI _PM_shr64(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-void    PMAPI _PM_sar64(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-void    PMAPI _PM_shl64(u32 a_low,s32 a_high,s32 shift,__i64 *result);
-void    PMAPI _PM_neg64(u32 a_low,s32 a_high,__i64 *result);
-#ifdef __NATIVE_INT64__
-#define PM_add64(r,a,b)     (r) = (a) + (b)
-#define PM_add64_32(r,a,b)  (r) = (a) + (b)
-#define PM_sub64(r,a,b)     (r) = (a) - (b)
-#define PM_sub64_32(r,a,b)  (r) = (a) - (b)
-#define PM_mul64(r,a,b)     (r) = (a) * (b)
-#define PM_mul64_32(r,a,b)  (r) = (a) * (b)
-#define PM_div64(r,a,b)     (r) = (a) / (b)
-#define PM_div64_32(r,a,b)  (r) = (a) / (b)
-#define PM_shr64(r,a,s)     (r) = (a) >> (s)
-#define PM_sar64(r,a,s)     (r) = ((s64)(a)) >> (s)
-#define PM_shl64(r,a,s)     (r) = (u64)(a) << (s)
-#define PM_neg64(r,a,s)     (r) = -(a)
-#define PM_not64(r,a,s)     (r) = ~(a)
-#define PM_eq64(a,b)        (a) == (b)
-#define PM_gt64(a,b)        (a) > (b)
-#define PM_lt64(a,b)        (a) < (b)
-#define PM_geq64(a,b)       (a) >= (b)
-#define PM_leq64(a,b)       (a) <= (b)
-#define PM_64to32(a)        (u32)(a)
-#define PM_64tos32(a)       (s32)(a)
-#define PM_set64(a,b,c)     (a) = ((u64)(b) << 32) + (c)
-#define PM_set64_32(a,b)    (a) = (b)
-#else
-#define PM_add64(r,a,b)     _PM_add64((a).low,(a).high,(b).low,(b).high,&(r))
-#define PM_add64_32(r,a,b)  _PM_add64((a).low,(a).high,b,0,&(r))
-#define PM_sub64(r,a,b)     _PM_sub64((a).low,(a).high,(b).low,(b).high,&(r))
-#define PM_sub64_32(r,a,b)  _PM_sub64((a).low,(a).high,b,0,&(r))
-#define PM_mul64(r,a,b)     _PM_mul64((a).low,(a).high,(b).low,(b).high,&(r))
-#define PM_mul64_32(r,a,b)  _PM_mul64((a).low,(a).high,b,0,&(r))
-#define PM_div64(r,a,b)     _PM_div64((a).low,(a).high,(b).low,(b).high,&(r))
-#define PM_div64_32(r,a,b)  _PM_div64((a).low,(a).high,b,0,&(r))
-#define PM_shr64(r,a,s)     _PM_shr64((a).low,(a).high,s,&(r))
-#define PM_sar64(r,a,s)     _PM_sar64((a).low,(a).high,s,&(r))
-#define PM_shl64(r,a,s)     _PM_shl64((a).low,(a).high,s,&(r))
-#define PM_neg64(r,a,s)     _PM_neg64((a).low,(a).high,&(r))
-#define PM_not64(r,a,s)     (r).low = ~(a).low, (r).high = ~(a).high
-#define PM_eq64(a,b)        ((a).low == (b).low && (a).high == (b).high)
-#define PM_gt64(a,b)        (((a).high > (b).high) || ((a).high == (b).high && (a).low > (b).low))
-#define PM_lt64(a,b)        (((a).high < (b).high) || ((a).high == (b).high && (a).low < (b).low))
-#define PM_geq64(a,b)       (PM_eq64(a,b) || PM_gt64(a,b))
-#define PM_leq64(a,b)       (PM_eq64(a,b) || PM_lt64(a,b))
-#define PM_64to32(a)        (u32)(a.low)
-#define PM_64tos32(a)       ((a).high < 0) ? -(a).low : (a).low)
-#define PM_set64(a,b,c)     (a).high = (b), (a).low = (c)
-#define PM_set64_32(a,b)    (a).high = 0, (a).low = (b)
-#endif
-
-/* Function to enable IOPL access if required */
-
-int     PMAPI PM_setIOPL(int iopl);
-
-/* Function to flush the TLB and CPU caches */
-
-void    PMAPI PM_flushTLB(void);
-
-/* DOS specific fucntions */
-
-#ifdef  __MSDOS__
-uint    PMAPI PMHELP_getVersion(void);
-void    PMAPI PM_VxDCall(VXD_regs *regs);
-#endif
-
-/* Functions to save and restore the VGA hardware state */
-
-int     PMAPI PM_getVGAStateSize(void);
-void    PMAPI PM_saveVGAState(void *stateBuf);
-void    PMAPI PM_restoreVGAState(const void *stateBuf);
-void    PMAPI PM_vgaBlankDisplay(void);
-void    PMAPI PM_vgaUnblankDisplay(void);
-
-/* Functions to load and unload DirectDraw libraries. Only used on
- * Windows platforms.
- */
-
-void *  PMAPI PM_loadDirectDraw(int device);
-void    PMAPI PM_unloadDirectDraw(int device);
-PM_HWND PMAPI PM_getDirectDrawWindow(void);
-void    PMAPI PM_doSuspendApp(void);
-
-/* Functions to install, start, stop and remove NT services. Valid only
- * for Win32 apps running on Windows NT.
- */
-
-#ifdef __WINDOWS32__
-ulong   PMAPI PM_installService(const char *szDriverName,const char *szServiceName,const char *szLoadGroup,ulong dwServiceType);
-ulong   PMAPI PM_startService(const char *szServiceName);
-ulong   PMAPI PM_stopService(const char *szServiceName);
-ulong   PMAPI PM_removeService(const char *szServiceName);
-#endif
-
-/* Routines to generate native interrupts (ie: protected mode interrupts
- * for protected mode apps) using an interface the same as that use by
- * int86() and int86x() in realmode. These routines are required because
- * many 32 bit compilers use different register structures and different
- * functions causing major portability headaches. Thus we provide our
- * own and solve it all in one fell swoop, and we also get a routine to
- * put stuff into 32 bit registers from real mode ;-)
- */
-
-void    PMAPI PM_segread(PMSREGS *sregs);
-int     PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out);
-int     PMAPI PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs);
-
-/* Call the X86 emulator or the real BIOS in our test harness */
-
-#if defined(TEST_HARNESS) && !defined(PMLIB)
-#define PM_mapRealPointer(r_seg,r_off)      _PM_imports.PM_mapRealPointer(r_seg,r_off)
-#define PM_getVESABuf(len,rseg,roff)        _PM_imports.PM_getVESABuf(len,rseg,roff)
-#define PM_callRealMode(seg,off,regs,sregs) _PM_imports.PM_callRealMode(seg,off,regs,sregs)
-#define PM_int86(intno,in,out)              _PM_imports.PM_int86(intno,in,out)
-#define PM_int86x(intno,in,out,sregs)       _PM_imports.PM_int86x(intno,in,out,sregs)
-#endif
-
-#ifdef  __cplusplus
-}                       /* End of "C" linkage for C++   */
-#endif
-
-/* Include OS extensions for interrupt handling */
-
-#if defined(__REALDOS__) || defined(__SMX32__)
-#include "pmint.h"
-#endif
-
-#endif /* __PMAPI_H */
diff --git a/board/MAI/bios_emulator/scitech/include/pmimp.h b/board/MAI/bios_emulator/scitech/include/pmimp.h
deleted file mode 100644
index 817f5e6a21..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pmimp.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Header file declaring all the PM imports structure for the
-*               current version of the PM library. Included in all code
-*               that needs to pass the PM imports to BPD files.
-*
-****************************************************************************/
-
-PM_imports  _VARAPI _PM_imports = {
-    sizeof(PM_imports),
-    PM_getModeType,
-    PM_getBIOSPointer,
-    PM_getA0000Pointer,
-    PM_mapPhysicalAddr,
-    PM_mallocShared,
-    NULL,
-    PM_freeShared,
-    PM_mapToProcess,
-    PM_mapRealPointer,
-    PM_allocRealSeg,
-    PM_freeRealSeg,
-    PM_allocLockedMem,
-    PM_freeLockedMem,
-    PM_callRealMode,
-    PM_int86,
-    PM_int86x,
-    DPMI_int86,
-    PM_availableMemory,
-    PM_getVESABuf,
-    PM_getOSType,
-    PM_fatalError,
-    PM_setBankA,
-    PM_setBankAB,
-    PM_setCRTStart,
-    PM_getCurrentPath,
-    PM_getVBEAFPath,
-    PM_getNucleusPath,
-    PM_getNucleusConfigPath,
-    PM_getUniqueID,
-    PM_getMachineName,
-    VF_available,
-    VF_init,
-    VF_exit,
-    PM_openConsole,
-    PM_getConsoleStateSize,
-    PM_saveConsoleState,
-    PM_restoreConsoleState,
-    PM_closeConsole,
-    PM_setOSCursorLocation,
-    PM_setOSScreenWidth,
-    PM_enableWriteCombine,
-    PM_backslash,
-    PM_lockDataPages,
-    PM_unlockDataPages,
-    PM_lockCodePages,
-    PM_unlockCodePages,
-    PM_setRealTimeClockHandler,
-    PM_setRealTimeClockFrequency,
-    PM_restoreRealTimeClockHandler,
-    PM_doBIOSPOST,
-    PM_getBootDrive,
-    PM_freePhysicalAddr,
-    PM_inpb,
-    PM_inpw,
-    PM_inpd,
-    PM_outpb,
-    PM_outpw,
-    PM_outpd,
-    NULL,
-    PM_setSuspendAppCallback,
-    PM_haveBIOSAccess,
-    PM_kbhit,
-    PM_getch,
-    PM_findBPD,
-    PM_getPhysicalAddr,
-    PM_sleep,
-    PM_getCOMPort,
-    PM_getLPTPort,
-    PM_loadLibrary,
-    PM_getProcAddress,
-    PM_freeLibrary,
-    PCI_enumerate,
-    PCI_accessReg,
-    PCI_setHardwareIRQ,
-    PCI_generateSpecialCyle,
-    NULL,
-    PCIBIOS_getEntry,
-    CPU_getProcessorType,
-    CPU_haveMMX,
-    CPU_have3DNow,
-    CPU_haveSSE,
-    CPU_haveRDTSC,
-    CPU_getProcessorSpeed,
-    ZTimerInit,
-    LZTimerOn,
-    LZTimerLap,
-    LZTimerOff,
-    LZTimerCount,
-    LZTimerOnExt,
-    LZTimerLapExt,
-    LZTimerOffExt,
-    LZTimerCountExt,
-    ULZTimerOn,
-    ULZTimerLap,
-    ULZTimerOff,
-    ULZTimerCount,
-    ULZReadTime,
-    ULZElapsedTime,
-    ULZTimerResolution,
-    PM_findFirstFile,
-    PM_findNextFile,
-    PM_findClose,
-    PM_makepath,
-    PM_splitpath,
-    PM_driveValid,
-    PM_getdcwd,
-    PM_setFileAttr,
-    PM_mkdir,
-    PM_rmdir,
-    PM_getFileAttr,
-    PM_getFileTime,
-    PM_setFileTime,
-    CPU_getProcessorName,
-    PM_getVGAStateSize,
-    PM_saveVGAState,
-    PM_restoreVGAState,
-    PM_vgaBlankDisplay,
-    PM_vgaUnblankDisplay,
-    PM_blockUntilTimeout,
-    _PM_add64,
-    _PM_sub64,
-    _PM_mul64,
-    _PM_div64,
-    _PM_shr64,
-    _PM_sar64,
-    _PM_shl64,
-    _PM_neg64,
-    PCI_findBARSize,
-    PCI_readRegBlock,
-    PCI_writeRegBlock,
-    PM_flushTLB,
-    PM_useLocalMalloc,
-    PM_malloc,
-    PM_calloc,
-    PM_realloc,
-    PM_free,
-    PM_getPhysicalAddrRange,
-    PM_allocPage,
-    PM_freePage,
-    PM_agpInit,
-    PM_agpExit,
-    PM_agpReservePhysical,
-    PM_agpReleasePhysical,
-    PM_agpCommitPhysical,
-    PM_agpFreePhysical,
-    PCI_getNumDevices,
-    PM_setLocalBPDPath,
-#ifdef __WINDOWS32__
-    PM_loadDirectDraw,
-    PM_unloadDirectDraw,
-    PM_getDirectDrawWindow,
-    PM_doSuspendApp,
-#else
-    NULL,
-    NULL,
-    NULL,
-    NULL,
-#endif
-    };
diff --git a/board/MAI/bios_emulator/scitech/include/pmint.h b/board/MAI/bios_emulator/scitech/include/pmint.h
deleted file mode 100644
index 7d76dad50c..0000000000
--- a/board/MAI/bios_emulator/scitech/include/pmint.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Real mode and 16/32 bit Protected Mode
-*
-* Description:  Header file for the interrupt handling extensions to the OS
-*               Portability Manager Library. These extensions includes
-*               simplified interrupt handling, allowing all common interrupt
-*               handlers to be hooked and handled directly with normal C
-*               functions, both in 16 bit and 32 bit modes. Note however that
-*               simplified handling does not mean slow performance! All low
-*               level interrupt handling is done efficiently in assembler
-*               for speed (well actually necessary to insulate the
-*               application from the lack of far pointers in 32 bit PM). The
-*               interrupt handlers currently supported are:
-*
-*                   Mouse (0x33 callback)
-*                   Timer Tick (0x8)
-*                   Keyboard (0x9 and 0x15)
-*                   Control C/Break (0x23/0x1B)
-*                   Critical Error (0x24)
-*
-****************************************************************************/
-
-#ifndef __PMINT_H
-#define __PMINT_H
-
-/*--------------------------- Macros and Typedefs -------------------------*/
-
-#ifdef __SMX32__
-/* PC interrupts (Ensure consistent with pme.inc) */
-#define PM_IRQ0      0x40
-#define PM_IRQ1      (PM_IRQ0+1)
-#define PM_IRQ6      (PM_IRQ0+6)
-#define PM_IRQ14     (PM_IRQ0+14)
-#endif
-
-/* Define the different types of interrupt handlers that we support     */
-
-typedef uint    (PMAPIP PM_criticalHandler)(uint axValue,uint diValue);
-typedef void    (PMAPIP PM_breakHandler)(uint breakHit);
-typedef short   (PMAPIP PM_key15Handler)(short scanCode);
-typedef void    (PMAPIP PM_mouseHandler)(uint event, uint butstate,int x,int y,int mickeyX,int mickeyY);
-
-/* Create a type for representing far pointers in both 16 and 32 bit
- * protected mode.
- */
-
-#ifdef  PM386
-typedef struct {
-    long    off;
-    short   sel;
-    } PMFARPTR;
-#define PMNULL  {0,0}
-#else
-typedef void *PMFARPTR;
-#define PMNULL  NULL
-#endif
-
-/*--------------------------- Function Prototypes -------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            /* Use "C" linkage when in C++ mode */
-#endif
-
-/* Routine to load save default data segment selector value into a code
- * segment variable, and another to load the value into the DS register.
- */
-
-void    PMAPI PM_loadDS(void);
-void    PMAPI PM_saveDS(void);
-
-/* Routine to install a mouse interrupt handling routine. The
- * mouse handler routine is a normal C function, and the PM library
- * will take care of passing the correct parameters to the function,
- * and switching to a local stack.
- *
- * Note that you _must_ lock the memory containing the mouse interrupt
- * handler with the PM_lockPages() function otherwise you may encounter
- * problems in virtual memory environments.
- */
-
-int     PMAPI PM_setMouseHandler(int mask,PM_mouseHandler mh);
-void    PMAPI PM_restoreMouseHandler(void);
-
-/* Routine to reset the mouse driver, and re-install the current
- * mouse interrupt handler if one was currently installed (since the
- * mouse reset will automatically remove this handler.
- */
-
-void    PMAPI PM_resetMouseDriver(int hardReset);
-
-/* Routine to reset the mouse driver, and re-install the current
- * mouse interrupt handler if one was currently installed (since the
- * mouse reset will automatically remove this handler.
- */
-
-void    PMAPI PM_resetMouseDriver(int hardReset);
-
-/* Routines to install and remove timer interrupt handlers.
- *
- * Note that you _must_ lock the memory containing the interrupt
- * handlers with the PM_lockPages() function otherwise you may encounter
- * problems in virtual memory environments.
- */
-
-void    PMAPI PM_setTimerHandler(PM_intHandler ih);
-void    PMAPI PM_chainPrevTimer(void);
-void    PMAPI PM_restoreTimerHandler(void);
-
-/* Routines to install and keyboard interrupt handlers.
- *
- * Note that you _must_ lock the memory containing the interrupt
- * handlers with the PM_lockPages() function otherwise you may encounter
- * problems in virtual memory environments.
- */
-
-void    PMAPI PM_setKeyHandler(PM_intHandler ih);
-void    PMAPI PM_chainPrevKey(void);
-void    PMAPI PM_restoreKeyHandler(void);
-
-/* Routines to hook and unhook the alternate Int 15h keyboard intercept
- * callout routine. Your event handler will need to return the following:
- *
- *  scanCode    - Let the BIOS process scan code (chains to previous handler)
- *  0           - You have processed the scan code so flush from BIOS
- *
- * Note that this is not available under all DOS extenders, but does
- * work under real mode, DOS4GW and X32-VM. It does not work under the
- * PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
- */
-
-void    PMAPI PM_setKey15Handler(PM_key15Handler ih);
-void    PMAPI PM_restoreKey15Handler(void);
-
-/* Routines to install and remove the control c/break interrupt handlers.
- * Interrupt handling is performed by the PM/Pro library, and you can call
- * the supplied routines to test the status of the Ctrl-C and Ctrl-Break
- * flags. If you pass the value TRUE for 'clearFlag' to these routines,
- * the internal flags will be reset in order to catch another Ctrl-C or
- * Ctrl-Break interrupt.
- */
-
-void    PMAPI PM_installBreakHandler(void);
-int     PMAPI PM_ctrlCHit(int clearFlag);
-int     PMAPI PM_ctrlBreakHit(int clearFlag);
-void    PMAPI PM_restoreBreakHandler(void);
-
-/* Routine to install an alternate break handler that will call your
- * code directly. This is not available under all DOS extenders, but does
- * work under real mode, DOS4GW and X32-VM. It does not work under the
- * PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
- *
- * Note that you should either install one or the other, but not both!
- */
-
-void    PMAPI PM_installAltBreakHandler(PM_breakHandler bh);
-
-/* Routines to install and remove the critical error handler. The interrupt
- * is handled by the PM/Pro library, and the operation will always be failed.
- * You can check the status of the critical error handler with the
- * appropriate function. If you pass the value TRUE for 'clearFlag', the
- * internal flag will be reset ready to catch another critical error.
- */
-
-void    PMAPI PM_installCriticalHandler(void);
-int     PMAPI PM_criticalError(int *axValue, int *diValue, int clearFlag);
-void    PMAPI PM_restoreCriticalHandler(void);
-
-/* Routine to install an alternate critical handler that will call your
- * code directly. This is not available under all DOS extenders, but does
- * work under real mode, DOS4GW and X32-VM. It does not work under the
- * PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
- *
- * Note that you should either install one or the other, but not both!
- */
-
-void    PMAPI PM_installAltCriticalHandler(PM_criticalHandler);
-
-/* Functions to manage protected mode only interrupt handlers */
-
-void    PMAPI PM_getPMvect(int intno, PMFARPTR *isr);
-void    PMAPI PM_setPMvect(int intno, PM_intHandler ih);
-void    PMAPI PM_restorePMvect(int intno, PMFARPTR isr);
-
-#ifdef  __cplusplus
-}                       /* End of "C" linkage for C++   */
-#endif
-
-#endif /* __PMINT_H */
diff --git a/board/MAI/bios_emulator/scitech/include/scitech.h b/board/MAI/bios_emulator/scitech/include/scitech.h
deleted file mode 100644
index 8d5eee9443..0000000000
--- a/board/MAI/bios_emulator/scitech/include/scitech.h
+++ /dev/null
@@ -1,712 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  General header file for operating system portable code.
-*
-****************************************************************************/
-
-#ifndef __SCITECH_H
-#define __SCITECH_H
-
-/* We have the following defines to identify the compilation environment:
- *
- *  __16BIT__       Compiling for 16 bit code (any environment)
- *  __32BIT__       Compiling for 32 bit code (any environment)
- *  __MSDOS__       Compiling for MS-DOS (includes __WINDOWS16__, __WIN386__)
- *  __REALDOS__     Compiling for MS-DOS (excludes __WINDOWS16__)
- *  __MSDOS16__     Compiling for 16 bit MS-DOS
- *  __MSDOS32__     Compiling for 32 bit MS-DOS
- *  __WINDOWS__     Compiling for Windows
- *  __WINDOWS16__   Compiling for 16 bit Windows (__MSDOS__ also defined)
- *  __WINDOWS32__   Compiling for 32 bit Windows
- *  __WIN32_VXD__   Compiling for a 32-bit C based VxD
- *  __NT_DRIVER__   Compiling for a 32-bit C based NT device driver
- *  __OS2__         Compiling for OS/2
- *  __OS2_16__      Compiling for 16 bit OS/2
- *  __OS2_32__      Compiling for 32 bit OS/2
- *  __UNIX__        Compiling for Unix
- *  __QNX__         Compiling for the QNX realtime OS (Unix compatible)
- *  __LINUX__       Compiling for the Linux OS (Unix compatible)
- *  __FREEBSD__     Compiling for the FreeBSD OS (Unix compatible)
- *  __BEOS__        Compiling for the BeOS (Unix compatible)
- *  __SMX32__       Compiling for the SMX 32-bit Real Time OS
- *  __ENEA_OSE__    Compiling for the OSE embedded OS
- *  __RTTARGET__    Compiling for the RTTarget 32-bit embedded OS
- *  __MACOS__       Compiling for the MacOS platform (PowerPC)
- *  __DRIVER__      Compiling for a 32-bit binary compatible driver
- *  __CONSOLE__     Compiling for a fullscreen OS console mode
- *  __SNAP__        Compiling as a Snap executeable or dynamic library
- *
- *  __INTEL__       Compiling for Intel CPU's
- *  __ALPHA__       Compiling for DEC Alpha CPU's
- *  __MIPS__        Compiling for MIPS CPU's
- *  __PPC__         Compiling for PowerPC CPU's
- *  __MC68K__       Compiling for Motorola 680x0
- *
- *  __BIG_ENDIAN__  Compiling for a big endian processor
- *
- */
-
-#ifdef  __SC__
-#if     __INTSIZE == 4
-#define __SC386__
-#endif
-#endif
-
-/* Determine some things that are compiler specific */
-
-#ifdef  __GNUC__
-#ifdef  __cplusplus
-/* G++ currently fucks this up! */
-#define __cdecl
-#define __stdcall
-#else
-#undef  __cdecl
-#undef  __stdcall
-#define __cdecl     __attribute__ ((cdecl))
-#define __stdcall   __attribute__ ((stdcall))
-#endif
-#define __FLAT__            /* GCC is always 32 bit flat model          */
-#define __HAS_BOOL__        /* Latest GNU C++ has ibool type            */
-#define __HAS_LONG_LONG__   /* GNU C supports long long type            */
-#include <stdio.h>          /* Bring in for definition of NULL          */
-#endif
-
-#ifdef  __BORLANDC__
-#if (__BORLANDC__ >= 0x500) || defined(CLASSLIB_DEFS_H)
-#define __HAS_BOOL__        /* Borland C++ 5.0 defines ibool type       */
-#endif
-#if (__BORLANDC__ >= 0x502) && !defined(VTOOLSD) && !defined(__SMX32__)
-#define __HAS_INT64__       /* Borland C++ 5.02 supports __int64 type   */
-#endif
-#endif
-
-#if defined(_MSC_VER) && !defined(__SC__) && !defined(VTOOLSD) && !defined(__SMX32__)
-#define __HAS_INT64__       /* Visual C++ supports __int64 type         */
-#endif
-
-#if defined(__WATCOMC__) && (__WATCOMC__ >= 1100) && !defined(VTOOLSD) && !defined(__SMX32__)
-#define __HAS_INT64__       /* Watcom C++ 11.0 supports __int64 type    */
-#endif
-
-/*---------------------------------------------------------------------------
- * Determine the compile time environment. This must be done for each
- * supported platform so that we can determine at compile time the target
- * environment, hopefully without requiring #define's from the user.
- *-------------------------------------------------------------------------*/
-
-/* 32-bit binary compatible driver. Compiled as Win32, but as OS neutral */
-#ifdef  __DRIVER__
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#undef  __WINDOWS__
-#undef  _WIN32
-#undef  __WIN32__
-#undef  __NT__
-
-/* 32-bit Snap exe or dll. Compiled as Win32, but as OS neutral */
-#elif   defined(__SNAP__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#undef  __WINDOWS__
-#undef  _WIN32
-#undef  __WIN32__
-#undef  __NT__
-
-/* 32-bit Windows VxD compile environment */
-#elif   defined(__vtoolsd_h_) || defined(VTOOLSD)
-#include <vtoolsc.h>
-#define __WIN32_VXD__
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#define _MAX_PATH   256
-#undef __WINDOWS32__
-
-/* 32-bit Windows NT driver compile environment: TODO!! */
-#elif   defined(__NT_DRIVER__)
-#include "ntdriver.h"
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#define _MAX_PATH   256
-#undef __WINDOWS32__
-
-/* 32-bit SMX compile environment */
-#elif   defined(__SMX32__)
-#ifndef __MSDOS__
-#define __MSDOS__
-#endif
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-
-/* 32-bit Enea OSE environment */
-#elif   defined(__ENEA_OSE__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-
-/* 32-bit RTTarget-32 environment */
-#elif   defined(__RTTARGET__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-
-/* 32-bit extended DOS compile environment */
-#elif   defined(__MSDOS__) || defined(__MSDOS32__) || defined(__DOS__) || defined(__DPMI32__) || (defined(M_I86) && (!defined(__SC386__) && !defined(M_I386))) || defined(TNT)
-#ifndef __MSDOS__
-#define __MSDOS__
-#endif
-#if     defined(__MSDOS32__) || defined(__386__) || defined(__FLAT__) || defined(__NT__) || defined(__SC386__)
-#ifndef __MSDOS32__
-#define __MSDOS32__
-#endif
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __REALDOS__
-#define __REALDOS__
-#endif
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-
-/* 16-bit Windows compile environment */
-#elif   (defined(_Windows) || defined(_WINDOWS)) && !defined(__DPMI16__)
-#ifndef __16BIT__
-#define __16BIT__
-#endif
-#ifndef __WINDOWS16__
-#define __WINDOWS16__
-#endif
-#ifndef __WINDOWS__
-#define __WINDOWS__
-#endif
-#ifndef __MSDOS__
-#define __MSDOS__
-#endif
-
-/* 16-bit DOS compile environment */
-#else
-#ifndef __16BIT__
-#define __16BIT__
-#endif
-#ifndef __MSDOS16__
-#define __MSDOS16__
-#endif
-#ifndef __REALDOS__
-#define __REALDOS__
-#endif
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit Windows compile environment */
-#elif   defined(WIN32) || defined(_WIN32) || defined(__WIN32__) || defined(__NT__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __WINDOWS32__
-#define __WINDOWS32__
-#endif
-#ifndef _WIN32
-#define _WIN32                  /* Microsoft Win32 SDK headers use _WIN32 */
-#endif
-#ifndef WIN32
-#define WIN32                   /* OpenGL headers use WIN32 */
-#endif
-#ifndef __WINDOWS__
-#define __WINDOWS__
-#endif
-
-/* 32-bit OS/2 VDD compile environment */
-/* We're assuming (for now) that CL386 must be used */
-#elif   defined(MSDOS) && defined(M_I386)
-/* fixes necessary to compile with CL386 */
-#define __cdecl  _cdecl
-typedef unsigned int size_t;
-
-#include <mvdm.h>
-
-/* This should probably be somewhere else...                 */
-/* Inline eligible functions (we have no CRT libs for CL386) */
-#pragma intrinsic (strcpy, strcmp, strlen, strcat)
-#pragma intrinsic (memcmp, memcpy, memset)
-
-#define __OS2_VDD__
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#define CCHMAXPATH  256
-#define _MAX_PATH   256
-#ifndef __OS2__
-#define __OS2__
-#endif
-#ifndef __OS2_32__
-#define __OS2_32__
-#endif
-
-/* 16-bit OS/2 compile environment */
-#elif   defined(__OS2_16__)
-#ifndef __OS2__
-#define __OS2__
-#endif
-#ifndef __16BIT__
-#define __16BIT__
-#endif
-#ifndef __OS2_PM__
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit OS/2 compile environment */
-#elif   defined(__OS2__) || defined(__OS2_32__)
-#ifndef __OS2__
-#define __OS2__
-#endif
-#ifndef __OS2_32__
-#define __OS2_32__
-#endif
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __OS2_PM__
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit QNX compile environment */
-#elif   defined(__QNX__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __UNIX__
-#define __UNIX__
-#endif
-#ifdef  __GNUC__
-#define stricmp strcasecmp
-#endif
-#if !defined(__PHOTON__) && !defined(__X11__)
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit Linux compile environment */
-#elif   defined(__LINUX__) || defined(linux)
-#ifndef __LINUX__
-#define __LINUX__
-#endif
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __UNIX__
-#define __UNIX__
-#endif
-#ifdef  __GNUC__
-#define stricmp strcasecmp
-#endif
-#ifndef __X11__
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit FreeBSD compile environment */
-#elif   defined(__FREEBSD__)
-#ifndef __FREEBSD__
-#define __FREEBSD__
-#endif
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __UNIX__
-#define __UNIX__
-#endif
-#ifdef  __GNUC__
-#define stricmp strcasecmp
-#endif
-#ifndef __X11__
-#ifndef __CONSOLE__
-#define __CONSOLE__
-#endif
-#endif
-
-/* 32-bit BeOS compile environment */
-#elif   defined(__BEOS__)
-#ifndef __32BIT__
-#define __32BIT__
-#endif
-#ifndef __UNIX__
-#define __UNIX__
-#endif
-#ifdef  __GNUC__
-#define stricmp strcasecmp
-#endif
-
-/* Unsupported OS! */
-#else
-#error  This platform is not currently supported!
-#endif
-
-/* Determine the CPU type that we are compiling for */
-
-#if     defined(__M_ALPHA) || defined(__ALPHA_) || defined(__ALPHA) || defined(__alpha)
-#ifndef __ALPHA__
-#define __ALPHA__
-#endif
-#elif   defined(__M_PPC) || defined(__POWERC)
-#ifndef __PPC__
-#define __PPC__
-#endif
-#elif   defined(__M_MRX000)
-#ifndef __MIPS__
-#define __MIPS__
-#endif
-#else
-#ifndef __INTEL__
-#define __INTEL__               /* Assume Intel if nothing found */
-#endif
-#endif
-
-/* We have the following defines to define the calling conventions for
- * publicly accesible functions:
- *
- *  _PUBAPI  - Compiler default calling conventions for all public 'C' functions
- *  _ASMAPI  - Calling conventions for all public assembler functions
- *  _VARAPI  - Modifiers for variables; Watcom C++ mangles C++ globals
- *  _STDCALL - Win32 __stdcall where possible, __cdecl if not supported
- */
-
-#if defined(_MSC_VER) && defined(_WIN32) && !defined(__SC__)
-#define __PASCAL    __stdcall
-#else
-#define __PASCAL    __pascal
-#endif
-
-#if defined(NO_STDCALL)
-#define _STDCALL    __cdecl
-#else
-#define _STDCALL    __stdcall
-#endif
-
-#ifdef  __WATCOMC__
-#if (__WATCOMC__ >= 1050)
-#define _VARAPI     __cdecl
-#else
-#define _VARAPI
-#endif
-#else
-#define _VARAPI
-#endif
-
-#if defined(__IBMC__) || defined(__IBMCPP__)
-#define PTR_DECL_IN_FRONT
-#endif
-
-/* Define the calling conventions for all public functions. For simplicity
- * we define all public functions as __cdecl calling conventions, so that
- * they are the same across all compilers and runtime DLL's.
- */
-
-#define _PUBAPI __cdecl
-#define _ASMAPI __cdecl
-
-/* Determine the syntax for declaring a function pointer with a
- * calling conventions override. Most compilers require the calling
- * convention to be declared in front of the '*', but others require
- * it to be declared after the '*'. We handle both in here depending
- * on what the compiler requires.
- */
-
-#ifdef  PTR_DECL_IN_FRONT
-#define _PUBAPIP    * _PUBAPI
-#define _ASMAPIP    * _ASMAPI
-#else
-#define _PUBAPIP    _PUBAPI *
-#define _ASMAPIP    _ASMAPI *
-#endif
-
-/* Useful macros */
-
-#define PRIVATE static
-#define PUBLIC
-
-/* This HAS to be 0L for 16-bit real mode code to work!!! */
-
-#ifndef NULL
-#       define _NULL 0L
-#       define NULL _NULL
-#endif
-
-#ifndef MAX
-#       define MAX(a,b) ( ((a) > (b)) ? (a) : (b))
-#endif
-#ifndef MIN
-#       define MIN(a,b) ( ((a) < (b)) ? (a) : (b))
-#endif
-#ifndef ABS
-#       define ABS(a)   ((a) >= 0 ? (a) : -(a))
-#endif
-#ifndef SIGN
-#       define SIGN(a)  ((a) > 0 ? 1 : -1)
-#endif
-
-/* General typedefs */
-
-#ifndef __GENDEFS
-#define __GENDEFS
-#if defined(__BEOS__)
-#include <SupportDefs.h>
-#else
-#ifdef __LINUX__
-#include <sys/types.h>
-#ifdef __STRICT_ANSI__
-typedef unsigned short      ushort;
-typedef unsigned long       ulong;
-typedef unsigned int        uint;
-#endif
-#ifdef  __KERNEL__
-#define __GENDEFS_2
-#endif
-#else
-#if !(defined(__QNXNTO__) && defined(GENERAL_STRUCT))
-typedef unsigned short      ushort;
-typedef unsigned long       ulong;
-#endif
-typedef unsigned int        uint;
-#endif
-typedef unsigned char       uchar;
-#endif
-typedef int                 ibool;      /* Integer boolean type         */
-#ifdef  USE_BOOL                        /* Only for older code          */
-#ifndef __cplusplus
-#define bool                ibool       /* Standard C                   */
-#else
-#ifndef __HAS_BOOL__
-#define bool                ibool       /* Older C++ compilers          */
-#endif
-#endif  /* __cplusplus */
-#endif  /* USE_BOOL */
-#endif  /* __GENDEFS */
-
-/* More general typedefs compatible with Linux kernel code */
-
-#ifndef __GENDEFS_2
-#define __GENDEFS_2
-typedef char                s8;
-typedef unsigned char       u8;
-typedef short               s16;
-typedef unsigned short      u16;
-#ifdef  __16BIT__
-typedef long                s32;
-typedef unsigned long       u32;
-#else
-typedef int                 s32;
-typedef unsigned int        u32;
-#endif
-typedef struct {
-    u32 low;
-    s32 high;
-    } __i64;
-#ifdef  __HAS_LONG_LONG__
-#define __NATIVE_INT64__
-typedef long long           s64;
-typedef unsigned long long  u64;
-#elif   defined(__HAS_INT64__) && !defined(__16BIT__)
-#define __NATIVE_INT64__
-typedef __int64             s64;
-typedef unsigned __int64    u64;
-#else
-typedef __i64               s64;
-typedef __i64               u64;
-#endif
-#endif
-
-/* Boolean truth values */
-
-#undef  false
-#undef  true
-#undef  NO
-#undef  YES
-#undef  FALSE
-#undef  TRUE
-#define false       0
-#define true        1
-#define NO          0
-#define YES         1
-#define FALSE       0
-#define TRUE        1
-
-/* Inline debugger interrupts for Watcom C++ and Borland C++ */
-
-#ifdef  __WATCOMC__
-void DebugInt(void);
-#pragma aux DebugInt =              \
-    "int    3";
-void DebugVxD(void);
-#pragma aux DebugVxD =              \
-    "int    1";
-#elif   defined(__BORLANDC__)
-#define DebugInt()  __emit__(0xCC)
-#define DebugVxD()  {__emit__(0xCD); __emit__(0x01);}
-#elif   defined(_MSC_VER)
-#define DebugInt()  _asm int 0x3
-#define DebugVxD()  _asm int 0x1
-#elif   defined(__GNUC__)
-#define DebugInt()  asm volatile ("int $0x3")
-#define DebugVxD()  asm volatile ("int $0x1")
-#else
-void _ASMAPI DebugInt(void);
-void _ASMAPI DebugVxD(void);
-#endif
-
-/* Macros to break once and never break again */
-
-#define DebugIntOnce()              \
-{                                   \
-    static ibool firstTime = true;  \
-    if (firstTime) {                \
-	firstTime = false;          \
-	DebugInt();                 \
-	}                           \
-}
-
-#define DebugVxDOnce()              \
-{                                   \
-    static ibool firstTime = true;  \
-    if (firstTime) {                \
-	firstTime = false;          \
-	DebugVxD();                 \
-	}                           \
-}
-
-/* Macros for linux string compatibility functions */
-
-#ifdef  __LINUX__
-#define stricmp strcasecmp
-#define strnicmp strncasecmp
-#endif
-
-/* Macros for NT driver string compatibility functions */
-
-#ifdef __NT_DRIVER__
-#define stricmp _stricmp
-#define strnicmp _strnicmp
-#endif
-
-/* Get rid of some helaciously annoying Visual C++ warnings! */
-
-#if defined(_MSC_VER) && !defined(__MWERKS__) && !defined(__SC__)
-#pragma warning(disable:4761)   /* integral size mismatch in argument; conversion supplied */
-#pragma warning(disable:4244)   /* conversion from 'unsigned short ' to 'unsigned char ', possible loss of data */
-#pragma warning(disable:4018)   /* '<' : signed/unsigned mismatch */
-#pragma warning(disable:4305)   /* 'initializing' : truncation from 'const double' to 'float' */
-#endif
-
-/*---------------------------------------------------------------------------
- * Set of debugging macros used by the libraries. If the debug flag is
- * set, they are turned on depending on the setting of the flag. User code
- * can override the default functions called when a check fails, and the
- * MGL does this so it can restore the system from graphics mode to display
- * an error message. These functions also log information to the
- * scitech.log file in the root directory of the hard drive when problems
- * show up.
- *
- * If you set the value of CHECKED to be 2, it will also enable code to
- * insert hard coded debugger interrupt into the source code at the line of
- * code where the check fail. This is useful if you run the code under a
- * debugger as it will break inside the debugger before exiting with a
- * failure condition.
- *
- * Also for code compiled to run under Windows, we also call the
- * OutputDebugString function to send the message to the system debugger
- * such as Soft-ICE or WDEB386. Hence if you get any non-fatal warnings you
- * will see those on the debugger terminal as well as in the log file.
- *-------------------------------------------------------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            /* Use "C" linkage when in C++ mode */
-#endif
-
-extern void (*_CHK_fail)(int fatal,const char *msg,const char *cond,const char *file,int line);
-void _CHK_defaultFail(int fatal,const char *msg,const char *cond,const char *file,int line);
-
-#ifdef  CHECKED
-#       define  CHK(x)      x
-#if     CHECKED > 1
-#       define  CHECK(p)                                            \
-	((p) ? (void)0 : DebugInt(),                                \
-	    _CHK_fail(1,"Check failed: '%s', file %s, line %d\n",   \
-	    #p, __FILE__, __LINE__))
-#       define  WARN(p)                                             \
-	((p) ? (void)0 : DebugInt(),                                \
-	    _CHK_fail(0,"Warning: '%s', file %s, line %d\n",        \
-	    #p, __FILE__, __LINE__))
-#else
-#       define  CHECK(p)                                            \
-	((p) ? (void)0 :                                            \
-	    _CHK_fail(1,"Check failed: '%s', file %s, line %d\n",   \
-	    #p, __FILE__, __LINE__))
-#       define  WARN(p)                                             \
-	((p) ? (void)0 :                                            \
-	    _CHK_fail(0,"Warning: '%s', file %s, line %d\n",        \
-	    #p, __FILE__, __LINE__))
-#endif
-#       define  LOGFATAL(msg)                                       \
-	    _CHK_fail(1,"Fatal error: '%s', file %s, line %d\n",    \
-	    msg, __FILE__, __LINE__)
-#       define  LOGWARN(msg)                                        \
-	    _CHK_fail(0,"Warning: '%s', file %s, line %d\n",        \
-	    msg, __FILE__, __LINE__)
-#else
-#       define  CHK(x)
-#       define  CHECK(p)        ((void)0)
-#       define  WARN(p)         ((void)0)
-#       define  LOGFATAL(msg)   ((void)0)
-#       define  LOGWARN(msg)    ((void)0)
-#endif
-
-#ifdef  __cplusplus
-}                       /* End of "C" linkage for C++   */
-#endif
-
-#endif  /* __SCITECH_H */
diff --git a/board/MAI/bios_emulator/scitech/include/scitech.mac b/board/MAI/bios_emulator/scitech/include/scitech.mac
deleted file mode 100644
index 27a2fc06e8..0000000000
--- a/board/MAI/bios_emulator/scitech/include/scitech.mac
+++ /dev/null
@@ -1,1321 +0,0 @@
-;****************************************************************************
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NetWide Assembler (NASM) or Turbo Assembler (TASM)
-;* Environment: Any Intel Environment
-;*
-;* Description: Macros to provide memory model independant assembly language
-;*              module for C programming. Supports the large and flat memory
-;*              models.
-;*
-;*              The defines that you should use when assembling modules that
-;*              use this macro package are:
-;*
-;*                  __LARGE__   Assemble for 16-bit large model
-;*                  __FLAT__    Assemble for 32-bit FLAT memory model
-;*                  __NOU__     No underscore for all external C labels
-;*                  __NOU_VAR__ No underscore for global variables only
-;*
-;*              The default settings are for 16-bit large memory model with
-;*              leading underscores for symbol names.
-;*
-;*              The main intent of the macro file is to enable programmers
-;*              to write _one_ set of source that can be assembled to run
-;*              in either 16 bit real and protected modes or 32 bit
-;*              protected mode without the need to riddle the code with
-;*              'if flatmodel' style conditional assembly (it is still there
-;*              but nicely hidden by a macro layer that enhances the
-;*              readability and understandability of the resulting code).
-;*
-;****************************************************************************
-
-; Include the appropriate version in here depending on the assembler. NASM
-; appears to always try and parse code, even if it is in a non-compiling
-; block of a ifdef expression, and hence crashes if we include the TASM
-; macro package in the same header file. Hence we split the macros up into
-; two separate header files.
-
-ifdef __NASM_MAJOR__
-
-;============================================================================
-; Macro package when compiling with NASM.
-;============================================================================
-
-; Turn off underscores for globals if disabled for all externals
-
-%ifdef  __NOU__
-%define __NOU_VAR__
-%endif
-
-; Define the __WINDOWS__ symbol if we are compiling for any Windows
-; environment
-
-%ifdef  __WINDOWS16__
-%define __WINDOWS__         1
-%endif
-%ifdef  __WINDOWS32__
-%define __WINDOWS__         1
-%define __WINDOWS32_386__   1
-%endif
-
-; Macros for accessing 'generic' registers
-
-%ifdef  __FLAT__
-%idefine _ax    eax
-%idefine _bx    ebx
-%idefine _cx    ecx
-%idefine _dx    edx
-%idefine _si    esi
-%idefine _di    edi
-%idefine _bp    ebp
-%idefine _sp    esp
-%idefine _es
-%idefine UCHAR  BYTE        ; Size of a character
-%idefine USHORT WORD        ; Size of a short
-%idefine UINT   DWORD       ; Size of an integer
-%idefine ULONG  DWORD       ; Size of a long
-%idefine BOOL   DWORD       ; Size of a boolean
-%idefine DPTR   DWORD       ; Size of a data pointer
-%idefine FDPTR  FWORD       ; Size of a far data pointer
-%idefine NDPTR  DWORD       ; Size of a near data pointer
-%idefine CPTR   DWORD       ; Size of a code pointer
-%idefine FCPTR  FWORD       ; Size of a far code pointer
-%idefine NCPTR  DWORD       ; Size of a near code pointer
-%idefine FPTR   NEAR        ; Distance for function pointers
-%idefine DUINT  dd          ; Declare a integer variable
-%idefine intsize 4
-%idefine flatmodel 1
-%else
-%idefine _ax    ax
-%idefine _bx    bx
-%idefine _cx    cx
-%idefine _dx    dx
-%idefine _si    si
-%idefine _di    di
-%idefine _bp    bp
-%idefine _sp    sp
-%idefine _es    es:
-%idefine UCHAR  BYTE        ; Size of a character
-%idefine USHORT WORD        ; Size of a short
-%idefine UINT   WORD        ; Size of an integer
-%idefine ULONG  DWORD       ; Size of a long
-%idefine BOOL   WORD        ; Size of a boolean
-%idefine DPTR   DWORD       ; Size of a data pointer
-%idefine FDPTR  DWORD       ; Size of a far data pointer
-%idefine NDPTR  WORD        ; Size of a near data pointer
-%idefine CPTR   DWORD       ; Size of a code pointer
-%idefine FCPTR  DWORD       ; Size of a far code pointer
-%idefine NCPTR  WORD        ; Size of a near code pointer
-%idefine FPTR   FAR         ; Distance for function pointers
-%idefine DUINT  dw          ; Declare a integer variable
-%idefine intsize 2
-%endif
-%idefine invert ~
-%idefine offset
-%idefine use_nasm
-
-; Convert all jumps to near jumps, since NASM does not so this automatically
-
-%idefine jo     jo near
-%idefine jno    jno near
-%idefine jz     jz near
-%idefine jnz    jnz near
-%idefine je     je near
-%idefine jne    jne near
-%idefine jb     jb  near
-%idefine jbe    jbe near
-%idefine ja     ja  near
-%idefine jae    jae near
-%idefine jl     jl  near
-%idefine jle    jle near
-%idefine jg     jg  near
-%idefine jge    jge near
-%idefine jc     jc  near
-%idefine jnc    jnc near
-%idefine js     js  near
-%idefine jns    jns near
-
-%ifdef  DOUBLE
-%idefine    REAL    QWORD
-%idefine    DREAL   dq
-%else
-%idefine    REAL    DWORD
-%idefine    DREAL   dd
-%endif
-
-; Boolean truth values (same as those in debug.h)
-
-%idefine False      0
-%idefine True       1
-%idefine No         0
-%idefine Yes        1
-%idefine Yes        1
-
-; Macro to be invoked at the start of all modules to set up segments for
-; later use. Does nothing for NASM.
-
-%imacro header 1
-%endmacro
-
-; Macro to begin a data segment
-
-%imacro begdataseg 1
-%ifdef __GNUC__
-segment .data public class=DATA use32 flat
-%else
-%ifdef flatmodel
-segment _DATA public align=4 class=DATA use32 flat
-%else
-segment _DATA public align=4 class=DATA use16
-%endif
-%endif
-%endmacro
-
-; Macro to end a data segment
-
-%imacro enddataseg 1
-%endmacro
-
-; Macro to begin a code segment
-
-%imacro begcodeseg 1
-%ifdef __PIC__
-%ifdef __LINUX__
-        extern _GLOBAL_OFFSET_TABLE_
-%else
-        extern __GLOBAL_OFFSET_TABLE_
-%endif
-%endif
-%ifdef __GNUC__
-segment .text public class=CODE use32 flat
-%else
-%ifdef flatmodel
-segment _TEXT public align=16 class=CODE use32 flat
-%else
-segment %1_TEXT public align=16 class=CODE use16
-%endif
-%endif
-%endmacro
-
-; Macro to begin a near code segment
-
-%imacro begcodeseg_near 0
-%ifdef __GNUC__
-segment .text public class=CODE use32 flat
-%else
-%ifdef flatmodel
-segment _TEXT public align=16 class=CODE use32 flat
-%else
-segment _TEXT public align=16 class=CODE use16
-%endif
-%endif
-%endmacro
-
-; Macro to end a code segment
-
-%imacro endcodeseg 1
-%endmacro
-
-; Macro to end a near code segment
-
-%imacro endcodeseg_near 0
-%endmacro
-
-; Macro for an extern C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-%imacro cextern 2
-%ifdef  __NOU_VAR__
-extern %1
-%else
-extern _%1
-%define %1 _%1
-%endif
-%endmacro
-
-%imacro cexternfunc 2
-%ifdef  __NOU__
-extern %1
-%else
-extern _%1
-%define %1 _%1
-%endif
-%endmacro
-
-; Macro for a public C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-%imacro cpublic 1
-%ifdef  __NOU_VAR__
-global %1
-%1:
-%else
-global _%1
-_%1:
-%define %1 _%1
-%endif
-%endmacro
-
-; Macro for an global C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-%imacro cglobal 1
-%ifdef  __NOU_VAR__
-global %1
-%else
-global _%1
-%define %1 _%1
-%endif
-%endmacro
-
-; Macro for an global C function symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-%imacro cglobalfunc 1
-%ifdef __PIC__
-global %1:function
-%else
-%ifdef  __NOU__
-global %1
-%else
-global _%1
-%define %1 _%1
-%endif
-%endif
-%endmacro
-
-; Macro to start a C callable function. This will be a far function for
-; 16-bit code, and a near function for 32-bit code.
-
-%imacro cprocstatic 1
-%push cproc
-%1:
-%ifdef flatmodel
-%stacksize flat
-%define ret retn
-%else
-%stacksize large
-%define ret retf
-%endif
-%assign %$localsize 0
-%endmacro
-
-%imacro cprocstart 1
-%push cproc
-    cglobalfunc %1
-%1:
-%ifdef flatmodel
-%stacksize flat
-%define ret retn
-%else
-%stacksize large
-%define ret retf
-%endif
-%assign %$localsize 0
-%endmacro
-
-; This macro sets up a procedure to be exported from a 16 bit DLL. Since the
-; calling conventions are always _far _pascal for 16 bit DLL's, we actually
-; rename this routine with an extra underscore with 'C' calling conventions
-; and a small DLL stub will be provided by the high level code to call the
-; assembler routine.
-
-%imacro cprocstartdll16 1
-%ifdef  __WINDOWS16__
-cprocstart  _%1
-%else
-cprocstart  %1
-%endif
-%endmacro
-
-; Macro to start a C callable near function.
-
-%imacro cprocnear 1
-%push cproc
-    cglobalfunc %1
-%1:
-%define ret retn
-%ifdef flatmodel
-%stacksize flat
-%else
-%stacksize small
-%endif
-%assign %$localsize 0
-%endmacro
-
-; Macro to start a C callable far function.
-
-%imacro cprocfar 1
-%push cproc
-    cglobalfunc %1
-%1:
-%define ret retf
-%ifdef flatmodel
-%stacksize flat
-%else
-%stacksize large
-%endif
-%assign %$localsize 0
-%endmacro
-
-; Macro to end a C function
-
-%imacro cprocend 0
-%pop
-%endmacro
-
-; Macros for entering and exiting C callable functions. Note that we must
-; always save and restore the SI and DI registers for C functions, and for
-; 32 bit C functions we also need to save and restore EBX and clear the
-; direction flag.
-
-%imacro enter_c 0
-        push    _bp
-        mov     _bp,_sp
-%ifnidn %$localsize,0
-        sub     _sp,%$localsize
-%endif
-%ifdef  flatmodel
-        push    ebx
-%endif
-        push    _si
-        push    _di
-%endmacro
-
-%imacro leave_c 0
-        pop     _di
-        pop     _si
-%ifdef  flatmodel
-        pop     ebx
-        cld
-%endif
-%ifnidn %$localsize,0
-        mov     _sp,_bp
-%endif
-        pop     _bp
-%endmacro
-
-%imacro   use_ebx 0
-%ifdef flatmodel
-        push    ebx
-%endif
-%endmacro
-
-%imacro   unuse_ebx 0
-%ifdef flatmodel
-        pop     ebx
-%endif
-%endmacro
-
-; Macros for saving and restoring the value of DS,ES,FS,GS when it is to
-; be used in assembly routines. This evaluates to nothing in the flat memory
-; model, but is saves and restores DS in the large memory model.
-
-%imacro use_ds 0
-%ifndef flatmodel
-        push    ds
-%endif
-%endmacro
-
-%imacro unuse_ds 0
-%ifndef flatmodel
-        pop     ds
-%endif
-%endmacro
-
-%imacro use_es 0
-%ifndef flatmodel
-        push    es
-%endif
-%endmacro
-
-%imacro unuse_es 0
-%ifndef flatmodel
-        pop     es
-%endif
-%endmacro
-
-; Macros for loading the address of a data pointer into a segment and
-; index register pair. The %imacro explicitly loads DS or ES in the 16 bit
-; memory model, or it simply loads the offset into the register in the flat
-; memory model since DS and ES always point to all addressable memory. You
-; must use the correct _REG (ie: _BX) %imacros for documentation purposes.
-
-%imacro _lds    2
-%ifdef flatmodel
-        mov     %1,%2
-%else
-        lds     %1,%2
-%endif
-%endmacro
-
-%imacro   _les  2
-%ifdef flatmodel
-        mov     %1,%2
-%else
-        les     %1,%2
-%endif
-%endmacro
-
-; Macros for adding and subtracting a value from registers. Two value are
-; provided, one for 16 bit modes and another for 32 bit modes (the extended
-; register is used in 32 bit modes).
-
-%imacro   _add  3
-%ifdef flatmodel
-        add     e%1, %3
-%else
-        add     %1, %2
-%endif
-%endmacro
-
-%imacro _sub    3
-%ifdef flatmodel
-        sub     e%1, %3
-%else
-        sub     %1, %2
-%endif
-%endmacro
-
-; Macro to clear the high order word for the 32 bit extended registers.
-; This is used to convert an unsigned 16 bit value to an unsigned 32 bit
-; value, and will evaluate to nothing in 16 bit modes.
-
-%imacro clrhi   1
-%ifdef  flatmodel
-        movzx   e%1,%1
-%endif
-%endmacro
-
-%imacro sgnhi   1
-%ifdef  flatmodel
-        movsx   e%1,%1
-%endif
-%endmacro
-
-; Macro to load an extended register with an integer value in either mode
-
-%imacro loadint 2
-%ifdef flatmodel
-        mov     e%1,%2
-%else
-        xor     e%1,e%1
-        mov     %1,%2
-%endif
-%endmacro
-
-; Macros to load and store integer values with string instructions
-
-%imacro LODSINT 0
-%ifdef flatmodel
-        lodsd
-%else
-        lodsw
-%endif
-%endmacro
-
-%imacro STOSINT 0
-%ifdef flatmodel
-        stosd
-%else
-        stosw
-%endif
-%endmacro
-
-; Macros to provide resb, resw, resd compatibility with NASM
-
-%imacro dclb 1
-times %1 db 0
-%endmacro
-
-%imacro dclw 1
-times %1 dw 0
-%endmacro
-
-%imacro dcld 1
-times %1 dd 0
-%endmacro
-
-; Macro to get the addres of the GOT for Linux/FreeBSD shared
-; libraries into the EBX register.
-
-%imacro     get_GOT 1
-            call    %%getgot
-%%getgot:   pop     %1
-            add     %1,_GLOBAL_OFFSET_TABLE_+$$-%%getgot wrt ..gotpc
-%endmacro
-
-; Macro to get the address of a *local* variable that is global to
-; a single module in a manner that will work correctly when compiled
-; into a Linux shared library. Note that this will *not* work for
-; variables that are defined as global to all modules. For that
-; use the LEA_G macro
-
-%macro      LEA_L    2
-%ifdef __PIC__
-        get_GOT %1
-        lea     %1,[%1+%2 wrt ..gotoff]
-%else
-        lea     %1,[%2]
-%endif
-%endmacro
-
-; Same macro as above but for global variables public to *all*
-; modules.
-
-%macro      LEA_G    2
-%ifdef __PIC__
-        get_GOT %1
-        mov     %1,[%1+%2 wrt ..got]
-%else
-        lea     %1,[%2]
-%endif
-%endmacro
-
-; macros to declare assembler function stubs for function structures
-
-%imacro BEGIN_STUBS_DEF 2
-begdataseg  _STUBS
-%ifdef  __NOU_VAR__
-extern %1
-%define STUBS_START %1
-%else
-extern _%1
-%define STUBS_START _%1
-%endif
-enddataseg  _STUBS
-begcodeseg  _STUBS
-%assign off %2
-%endmacro
-
-%imacro   DECLARE_STUB  1
-%ifdef __PIC__
-        global %1:function
-%1:
-        get_GOT eax
-        mov     eax,[eax+STUBS_START wrt ..got]
-        jmp     [eax+off]
-%else
-%ifdef  __NOU__
-        global %1
-%1:
-%else
-        global _%1
-_%1:
-%endif
-        jmp     [DWORD STUBS_START+off]
-%endif
-%assign off off+4
-%endmacro
-
-%imacro   SKIP_STUB  1
-%assign off off+4
-%endmacro
-
-%imacro DECLARE_STDCALL 2
-%ifdef  STDCALL_MANGLE
-        global _%1@%2
-_%1@%2:
-%else
-%ifdef STDCALL_USCORE
-        global _%1
-_%1:
-%else
-        global %1
-%1:
-%endif
-%endif
-        jmp     [DWORD STUBS_START+off]
-%assign off off+4
-%endmacro
-
-%imacro   END_STUBS_DEF 0
-endcodeseg  _STUBS
-%endmacro
-
-; macros to declare assembler import stubs for binary loadable drivers
-
-%imacro BEGIN_IMPORTS_DEF   1
-BEGIN_STUBS_DEF %1,4
-%endmacro
-
-%imacro   DECLARE_IMP   2
-DECLARE_STUB    %1
-%endmacro
-
-%imacro   SKIP_IMP   2
-SKIP_STUB    %1
-%endmacro
-
-%imacro   SKIP_IMP2   1
-DECLARE_STUB    %1
-%endmacro
-
-%imacro   SKIP_IMP3   1
-SKIP_STUB    %1
-%endmacro
-
-%imacro   END_IMPORTS_DEF 0
-END_STUBS_DEF
-%endmacro
-
-else    ; __NASM_MAJOR__
-
-;============================================================================
-; Macro package when compiling with TASM.
-;============================================================================
-
-; Turn off underscores for globals if disabled for all externals
-
-ifdef   __NOU__
-__NOU_VAR__         = 1
-endif
-
-; Define the __WINDOWS__ symbol if we are compiling for any Windows
-; environment
-
-ifdef   __WINDOWS16__
-__WINDOWS__         = 1
-endif
-ifdef   __WINDOWS32__
-__WINDOWS__         = 1
-__WINDOWS32_386__   = 1
-endif
-ifdef   __WIN386__
-__WINDOWS__         = 1
-__WINDOWS32_386__   = 1
-endif
-ifdef   __VXD__
-__WINDOWS__         = 1
-__WINDOWS32_386__   = 1
-        MASM
-        .386
-        NO_SEGMENTS = 1
-        include vmm.inc         ; IGNORE DEPEND
-        include vsegment.inc    ; IGNORE DEPEND
-        IDEAL
-endif
-
-; Macros for accessing 'generic' registers
-
-ifdef   __FLAT__
-        _ax         EQU eax     ; EAX is used for accumulator
-        _bx         EQU ebx     ; EBX is used for accumulator
-        _cx         EQU ecx     ; ECX is used for looping
-        _dx         EQU edx     ; EDX is used for data register
-        _si         EQU esi     ; ESI is the source index register
-        _di         EQU edi     ; EDI is the destination index register
-        _bp         EQU ebp     ; EBP is used for base pointer register
-        _sp         EQU esp     ; ESP is used for stack pointer register
-        _es         EQU         ; ES and DS are the same in 32 bit PM
-        typedef UCHAR BYTE      ; Size of a character
-        typedef USHORT WORD     ; Size of a short
-        typedef UINT DWORD      ; Size of an integer
-        typedef ULONG DWORD     ; Size of a long
-        typedef BOOL DWORD      ; Size of a boolean
-        typedef DPTR DWORD      ; Size of a data pointer
-        typedef FDPTR FWORD     ; Size of a far data pointer
-        typedef NDPTR DWORD     ; Size of a near data pointer
-        typedef CPTR DWORD      ; Size of a code pointer
-        typedef FCPTR FWORD     ; Size of a far code pointer
-        typedef NCPTR DWORD     ; Size of a near code pointer
-        typedef DUINT DWORD     ; Declare a integer variable
-        FPTR        EQU NEAR    ; Distance for function pointers
-        intsize     =   4       ; Size of an integer
-        flatmodel   =   1       ; This is a flat memory model
-        P386                    ; Turn on 386 code generation
-        MODEL       FLAT        ; Set up for 32 bit simplified FLAT model
-else
-        _ax         EQU ax      ; AX is used for accumulator
-        _bx         EQU bx      ; BX is used for accumulator
-        _cx         EQU cx      ; CX is used for looping
-        _dx         EQU dx      ; DX is used for data register
-        _si         EQU si      ; SI is the source index register
-        _di         EQU di      ; DI is the destination index register
-        _bp         EQU bp      ; BP is used for base pointer register
-        _sp         EQU sp      ; SP is used for stack pointer register
-        _es         EQU es:     ; ES is used for segment override
-        typedef UCHAR BYTE      ; Size of a character
-        typedef USHORT WORD     ; Size of a short
-        typedef UINT WORD       ; Size of an integer
-        typedef ULONG DWORD     ; Size of a long
-        typedef BOOL WORD       ; Size of a boolean
-        typedef DPTR DWORD      ; Size of a data pointer
-        typedef FDPTR DWORD     ; Size of a far data pointer
-        typedef NDPTR WORD      ; Size of a near data pointer
-        typedef CPTR DWORD      ; Size of a code pointer
-        typedef FCPTR DWORD     ; Size of a far code pointer
-        typedef NCPTR WORD      ; Size of a near code pointer
-        typedef DUINT WORD      ; Declare a integer variable
-        FPTR        EQU FAR     ; Distance for function pointers
-        intsize     =   2       ; Size of an integer
-        P386                    ; Turn on 386 code generation
-endif
-        invert      EQU not
-
-; Provide a typedef for real floating point numbers
-
-ifdef   DOUBLE
-typedef REAL    QWORD
-typedef DREAL   QWORD
-else
-typedef REAL    DWORD
-typedef DREAL   DWORD
-endif
-
-; Macros to access the floating point stack registers to convert them
-; from NASM style to TASM style
-
-st0         EQU     st(0)
-st1         EQU     st(1)
-st2         EQU     st(2)
-st3         EQU     st(3)
-st4         EQU     st(4)
-st5         EQU     st(5)
-st6         EQU     st(6)
-st7         EQU     st(7)
-st8         EQU     st(8)
-
-; Boolean truth values (same as those in debug.h)
-
-ifndef  __VXD__
-False       =       0
-True        =       1
-No          =       0
-Yes         =       1
-Yes         =       1
-endif
-
-; Macros for the _DATA data segment. This segment contains initialised data.
-
-MACRO   begdataseg name
-ifdef   __VXD__
-        MASM
-VXD_LOCKED_DATA_SEG
-        IDEAL
-else
-ifdef   flatmodel
-        DATASEG
-else
-SEGMENT _DATA DWORD PUBLIC USE16 'DATA'
-endif
-endif
-ENDM
-
-MACRO   enddataseg name
-ifdef   __VXD__
-        MASM
-VXD_LOCKED_DATA_ENDS
-        IDEAL
-else
-ifndef  flatmodel
-ENDS    _DATA
-endif
-endif
-ENDM
-
-; Macro for the main code segment.
-
-MACRO   begcodeseg name
-ifdef   __VXD__
-        MASM
-VXD_LOCKED_CODE_SEG
-        IDEAL
-else
-ifdef   flatmodel
-        CODESEG
-        ASSUME  CS:FLAT,DS:FLAT,SS:FLAT
-else
-SEGMENT &name&_TEXT PARA PUBLIC USE16 'CODE'
-        ASSUME CS:&name&_TEXT,DS:_DATA
-endif
-endif
-ENDM
-
-; Macro for a near code segment
-
-MACRO   begcodeseg_near
-ifdef   flatmodel
-        CODESEG
-        ASSUME  CS:FLAT,DS:FLAT,SS:FLAT
-else
-SEGMENT _TEXT PARA PUBLIC USE16 'CODE'
-        ASSUME CS:_TEXT,DS:_DATA
-endif
-ENDM
-
-MACRO   endcodeseg name
-ifdef   __VXD__
-        MASM
-VXD_LOCKED_CODE_ENDS
-        IDEAL
-else
-ifndef  flatmodel
-ENDS    &name&_TEXT
-endif
-endif
-ENDM
-
-MACRO   endcodeseg_near
-ifndef  flatmodel
-ENDS    _TEXT
-endif
-ENDM
-
-; Macro to be invoked at the start of all modules to set up segments for
-; later use.
-
-MACRO   header name
-begdataseg name
-enddataseg name
-ENDM
-
-; Macro for an extern C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-MACRO   cextern name,size
-ifdef   __NOU_VAR__
-        EXTRN   name:size
-else
-        EXTRN   _&name&:size
-name    EQU     _&name&
-endif
-ENDM
-
-MACRO   cexternfunc name,size
-ifdef   __NOU__
-        EXTRN   name:size
-else
-        EXTRN   _&name&:size
-name    EQU     _&name&
-endif
-ENDM
-
-MACRO   stdexternfunc   name,num_args,size
-ifdef   STDCALL_MANGLE
-        EXTRN   _&name&@&num_args&:size
-name    EQU     _&name&@&num_args
-else
-        EXTRN   name:size
-endif
-ENDM
-
-; Macro for a public C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-MACRO   cpublic name
-ifdef   __NOU_VAR__
-name:
-        PUBLIC  name
-else
-_&name&:
-        PUBLIC  _&name&
-name    EQU     _&name&
-endif
-ENDM
-
-; Macro for an global C symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-MACRO   cglobal name
-ifdef   __NOU_VAR__
-        PUBLIC  name
-else
-        PUBLIC  _&name&
-name    EQU     _&name&
-endif
-ENDM
-
-; Macro for an global C function symbol. If the C compiler requires leading
-; underscores, then the underscores are added to the symbol names, otherwise
-; they are left off. The symbol name is referenced in the assembler code
-; using the non-underscored symbol name.
-
-MACRO   cglobalfunc name
-ifdef   __NOU__
-        PUBLIC  name
-else
-        PUBLIC  _&name&
-name    EQU     _&name&
-endif
-ENDM
-
-; Macro to start a C callable function. This will be a far function for
-; 16-bit code, and a near function for 32-bit code.
-
-MACRO   cprocstatic name        ; Set up model independant private proc
-ifdef flatmodel
-PROC    name NEAR
-else
-PROC    name FAR
-endif
-LocalSize   = 0
-ENDM
-
-MACRO   cprocstart name         ; Set up model independant proc
-ifdef flatmodel
-ifdef   __NOU__
-PROC    name NEAR
-else
-PROC    _&name& NEAR
-endif
-else
-ifdef   __NOU__
-PROC    name FAR
-else
-PROC    _&name& FAR
-endif
-endif
-LocalSize   = 0
-        cglobalfunc name
-ENDM
-
-MACRO   cprocnear name          ; Set up near proc
-ifdef   __NOU__
-PROC    name NEAR
-else
-PROC    _&name& NEAR
-endif
-LocalSize   = 0
-        cglobalfunc name
-ENDM
-
-MACRO   cprocfar name           ; Set up far proc
-ifdef   __NOU__
-PROC    name FAR
-else
-PROC    _&name& FAR
-endif
-LocalSize   = 0
-        cglobalfunc name
-ENDM
-
-MACRO   cprocend               ; End procedure macro
-ENDP
-ENDM
-
-; This macro sets up a procedure to be exported from a 16 bit DLL. Since the
-; calling conventions are always _far _pascal for 16 bit DLL's, we actually
-; rename this routine with an extra underscore with 'C' calling conventions
-; and a small DLL stub will be provided by the high level code to call the
-; assembler routine.
-
-MACRO   cprocstartdll16 name
-ifdef   __WINDOWS16__
-cprocstart  _&name&
-else
-cprocstart  name
-endif
-ENDM
-
-; Macros for entering and exiting C callable functions. Note that we must
-; always save and restore the SI and DI registers for C functions, and for
-; 32 bit C functions we also need to save and restore EBX and clear the
-; direction flag.
-
-MACRO   save_c_regs
-ifdef   flatmodel
-        push    ebx
-endif
-        push    _si
-        push    _di
-ENDM
-
-MACRO   enter_c
-        push    _bp
-        mov     _bp,_sp
-    IFDIFI  <LocalSize>,<0>
-        sub     _sp,LocalSize
-    ENDIF
-        save_c_regs
-ENDM
-
-MACRO   restore_c_regs
-        pop     _di
-        pop     _si
-ifdef   flatmodel
-        pop     ebx
-endif
-ENDM
-
-MACRO   leave_c
-        restore_c_regs
-        cld
-    IFDIFI  <LocalSize>,<0>
-        mov     _sp,_bp
-    ENDIF
-        pop     _bp
-ENDM
-
-MACRO   use_ebx
-ifdef flatmodel
-        push    ebx
-endif
-ENDM
-
-MACRO   unuse_ebx
-ifdef flatmodel
-        pop     ebx
-endif
-ENDM
-
-; Macros for saving and restoring the value of DS,ES,FS,GS when it is to
-; be used in assembly routines. This evaluates to nothing in the flat memory
-; model, but is saves and restores DS in the large memory model.
-
-MACRO   use_ds
-ifndef flatmodel
-        push    ds
-endif
-ENDM
-
-MACRO   unuse_ds
-ifndef flatmodel
-        pop     ds
-endif
-ENDM
-
-MACRO   use_es
-ifndef flatmodel
-        push    es
-endif
-ENDM
-
-MACRO   unuse_es
-ifndef flatmodel
-        pop     es
-endif
-ENDM
-
-; Macros for loading the address of a data pointer into a segment and
-; index register pair. The macro explicitly loads DS or ES in the 16 bit
-; memory model, or it simply loads the offset into the register in the flat
-; memory model since DS and ES always point to all addressable memory. You
-; must use the correct _REG (ie: _BX) macros for documentation purposes.
-
-MACRO   _lds    reg, addr
-ifdef flatmodel
-        mov     reg,addr
-else
-        lds     reg,addr
-endif
-ENDM
-
-MACRO   _les    reg, addr
-ifdef flatmodel
-        mov     reg,addr
-else
-        les     reg,addr
-endif
-ENDM
-
-; Macros for adding and subtracting a value from registers. Two value are
-; provided, one for 16 bit modes and another for 32 bit modes (the extended
-; register is used in 32 bit modes).
-
-MACRO   _add    reg, val16, val32
-ifdef flatmodel
-        add     e&reg&, val32
-else
-        add     reg, val16
-endif
-ENDM
-
-MACRO   _sub    reg, val16, val32
-ifdef flatmodel
-        sub     e&reg&, val32
-else
-        sub     reg, val16
-endif
-ENDM
-
-; Macro to clear the high order word for the 32 bit extended registers.
-; This is used to convert an unsigned 16 bit value to an unsigned 32 bit
-; value, and will evaluate to nothing in 16 bit modes.
-
-MACRO   clrhi   reg
-ifdef   flatmodel
-        movzx   e&reg&,reg
-endif
-ENDM
-
-MACRO   sgnhi   reg
-ifdef   flatmodel
-        movsx   e&reg&,reg
-endif
-ENDM
-
-; Macro to load an extended register with an integer value in either mode
-
-MACRO   loadint reg,val
-ifdef flatmodel
-        mov     e&reg&,val
-else
-        xor     e&reg&,e&reg&
-        mov     reg,val
-endif
-ENDM
-
-; Macros to load and store integer values with string instructions
-
-MACRO   LODSINT
-ifdef flatmodel
-        lodsd
-else
-        lodsw
-endif
-ENDM
-
-MACRO   STOSINT
-ifdef flatmodel
-        stosd
-else
-        stosw
-endif
-ENDM
-
-; Macros to provide resb, resw, resd compatibility with NASM
-
-MACRO   dclb    count
-db  count dup (0)
-ENDM
-
-MACRO   dclw    count
-dw  count dup (0)
-ENDM
-
-MACRO   dcld    count
-dd  count dup (0)
-ENDM
-
-; Macros to provide resb, resw, resd compatibility with NASM
-
-MACRO   resb    count
-db  count dup (?)
-ENDM
-
-MACRO   resw    count
-dw  count dup (?)
-ENDM
-
-MACRO   resd    count
-dd  count dup (?)
-ENDM
-
-; Macros to declare assembler stubs for function structures
-
-MACRO   BEGIN_STUBS_DEF name, firstOffset
-begdataseg  _STUBS
-ifdef   __NOU_VAR__
-        EXTRN   name:DWORD
-STUBS_START =   name
-else
-        EXTRN   _&name&:DWORD
-name    EQU     _&name&
-STUBS_START =   _&name
-endif
-enddataseg  _STUBS
-begcodeseg  _STUBS
-off = firstOffset
-ENDM
-
-MACRO   DECLARE_STUB    name
-ifdef   __NOU__
-name:
-        PUBLIC  name
-else
-_&name:
-        PUBLIC  _&name
-endif
-        jmp     [DWORD STUBS_START+off]
-off = off + 4
-ENDM
-
-MACRO   SKIP_STUB    name
-off = off + 4
-ENDM
-
-MACRO   DECLARE_STDCALL name,num_args
-ifdef   STDCALL_MANGLE
-_&name&@&num_args&:
-        PUBLIC  _&name&@&num_args&
-else
-name:
-        PUBLIC  name
-endif
-        jmp     [DWORD STUBS_START+off]
-off = off + 4
-ENDM
-
-MACRO   END_STUBS_DEF
-endcodeseg  _STUBS
-ENDM
-
-MACRO   BEGIN_IMPORTS_DEF   name
-BEGIN_STUBS_DEF name,4
-ENDM
-
-ifndef LOCAL_DECLARE_IMP
-MACRO   DECLARE_IMP name, numArgs
-DECLARE_STUB    name
-ENDM
-
-MACRO   SKIP_IMP name
-SKIP_STUB       name
-ENDM
-
-MACRO   SKIP_IMP2 name, numArgs
-DECLARE_STUB    name
-ENDM
-
-MACRO   SKIP_IMP3 name
-SKIP_STUB       name
-ENDM
-endif
-
-MACRO   END_IMPORTS_DEF
-END_STUBS_DEF
-ENDM
-
-MACRO   LEA_L    reg,name
-        lea     reg,[name]
-ENDM
-
-MACRO   LEA_G    reg,name
-        lea     reg,[name]
-ENDM
-
-endif
-
diff --git a/board/MAI/bios_emulator/scitech/include/x86emu.h b/board/MAI/bios_emulator/scitech/include/x86emu.h
deleted file mode 100644
index 1d87d4e57f..0000000000
--- a/board/MAI/bios_emulator/scitech/include/x86emu.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/****************************************************************************
-*
-*                       Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*                    Copyright (C) David Mosberger-Tang
-*                      Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for public specific functions.
-*               Any application linking against us should only
-*               include this header
-*
-****************************************************************************/
-
-#ifndef __X86EMU_X86EMU_H
-#define __X86EMU_X86EMU_H
-
-#ifdef SCITECH
-#include "scitech.h"
-#define X86API  _ASMAPI
-#define X86APIP _ASMAPIP
-typedef int X86EMU_pioAddr;
-#else
-#include "x86emu/types.h"
-#define X86API
-#define X86APIP *
-#endif
-#include "x86emu/regs.h"
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/****************************************************************************
-REMARKS:
-Data structure containing ponters to programmed I/O functions used by the
-emulator. This is used so that the user program can hook all programmed
-I/O for the emulator to handled as necessary by the user program. By
-default the emulator contains simple functions that do not do access the
-hardware in any way. To allow the emualtor access the hardware, you will
-need to override the programmed I/O functions using the X86EMU_setupPioFuncs
-function.
-
-HEADER:
-x86emu.h
-
-MEMBERS:
-inb     - Function to read a byte from an I/O port
-inw     - Function to read a word from an I/O port
-inl     - Function to read a dword from an I/O port
-outb    - Function to write a byte to an I/O port
-outw    - Function to write a word to an I/O port
-outl    - Function to write a dword to an I/O port
-****************************************************************************/
-typedef struct {
-    u8      (X86APIP inb)(X86EMU_pioAddr addr);
-    u16     (X86APIP inw)(X86EMU_pioAddr addr);
-    u32     (X86APIP inl)(X86EMU_pioAddr addr);
-    void    (X86APIP outb)(X86EMU_pioAddr addr, u8 val);
-    void    (X86APIP outw)(X86EMU_pioAddr addr, u16 val);
-    void    (X86APIP outl)(X86EMU_pioAddr addr, u32 val);
-    } X86EMU_pioFuncs;
-
-/****************************************************************************
-REMARKS:
-Data structure containing ponters to memory access functions used by the
-emulator. This is used so that the user program can hook all memory
-access functions as necessary for the emulator. By default the emulator
-contains simple functions that only access the internal memory of the
-emulator. If you need specialised functions to handle access to different
-types of memory (ie: hardware framebuffer accesses and BIOS memory access
-etc), you will need to override this using the X86EMU_setupMemFuncs
-function.
-
-HEADER:
-x86emu.h
-
-MEMBERS:
-rdb     - Function to read a byte from an address
-rdw     - Function to read a word from an address
-rdl     - Function to read a dword from an address
-wrb     - Function to write a byte to an address
-wrw     - Function to write a word to an address
-wrl     - Function to write a dword to an address
-****************************************************************************/
-typedef struct {
-    u8      (X86APIP rdb)(u32 addr);
-    u16     (X86APIP rdw)(u32 addr);
-    u32     (X86APIP rdl)(u32 addr);
-    void    (X86APIP wrb)(u32 addr, u8 val);
-    void    (X86APIP wrw)(u32 addr, u16 val);
-    void    (X86APIP wrl)(u32 addr, u32 val);
-    } X86EMU_memFuncs;
-
-/****************************************************************************
-  Here are the default memory read and write
-  function in case they are needed as fallbacks.
-***************************************************************************/
-extern u8 X86API rdb(u32 addr);
-extern u16 X86API rdw(u32 addr);
-extern u32 X86API rdl(u32 addr);
-extern void X86API wrb(u32 addr, u8 val);
-extern void X86API wrw(u32 addr, u16 val);
-extern void X86API wrl(u32 addr, u32 val);
-
-#pragma pack()
-
-/*--------------------- type definitions -----------------------------------*/
-
-typedef void (X86APIP X86EMU_intrFuncs)(int num);
-extern X86EMU_intrFuncs _X86EMU_intrTab[256];
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {                        /* Use "C" linkage when in C++ mode */
-#endif
-
-void    X86EMU_setupMemFuncs(X86EMU_memFuncs *funcs);
-void    X86EMU_setupPioFuncs(X86EMU_pioFuncs *funcs);
-void    X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]);
-void    X86EMU_prepareForInt(int num);
-
-/* decode.c */
-
-void    X86EMU_exec(void);
-void    X86EMU_halt_sys(void);
-
-#ifdef  DEBUG
-#define HALT_SYS()  \
-    printk("halt_sys: file %s, line %d\n", __FILE__, __LINE__), \
-    X86EMU_halt_sys()
-#else
-#define HALT_SYS()  X86EMU_halt_sys()
-#endif
-
-/* Debug options */
-
-#define DEBUG_DECODE_F          0x0001  /* print decoded instruction  */
-#define DEBUG_TRACE_F           0x0002  /* dump regs before/after execution */
-#define DEBUG_STEP_F            0x0004
-#define DEBUG_DISASSEMBLE_F     0x0008
-#define DEBUG_BREAK_F           0x0010
-#define DEBUG_SVC_F             0x0020
-#define DEBUG_SAVE_CS_IP        0x0040
-#define DEBUG_FS_F              0x0080
-#define DEBUG_PROC_F            0x0100
-#define DEBUG_SYSINT_F          0x0200 /* bios system interrupts. */
-#define DEBUG_TRACECALL_F       0x0400
-#define DEBUG_INSTRUMENT_F      0x0800
-#define DEBUG_MEM_TRACE_F       0x1000
-#define DEBUG_IO_TRACE_F        0x2000
-#define DEBUG_TRACECALL_REGS_F  0x4000
-#define DEBUG_DECODE_NOPRINT_F  0x8000
-#define DEBUG_EXIT              0x10000
-#define DEBUG_SYS_F             (DEBUG_SVC_F|DEBUG_FS_F|DEBUG_PROC_F)
-
-void    X86EMU_trace_regs(void);
-void    X86EMU_trace_xregs(void);
-void    X86EMU_dump_memory(u16 seg, u16 off, u32 amt);
-int     X86EMU_trace_on(void);
-int     X86EMU_trace_off(void);
-
-#ifdef  __cplusplus
-}                                   /* End of "C" linkage for C++       */
-#endif
-
-#endif /* __X86EMU_X86EMU_H */
diff --git a/board/MAI/bios_emulator/scitech/include/x86emu/fpu_regs.h b/board/MAI/bios_emulator/scitech/include/x86emu/fpu_regs.h
deleted file mode 100644
index 777b03cd71..0000000000
--- a/board/MAI/bios_emulator/scitech/include/x86emu/fpu_regs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/****************************************************************************
-*
-*                       Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*                    Copyright (C) David Mosberger-Tang
-*                      Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for FPU register definitions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_FPU_REGS_H
-#define __X86EMU_FPU_REGS_H
-
-#ifdef X86_FPU_SUPPORT
-
-#pragma pack(1)
-
-/* Basic 8087 register can hold any of the following values: */
-
-union x86_fpu_reg_u {
-    s8                  tenbytes[10];
-    double              dval;
-    float               fval;
-    s16                 sval;
-    s32                 lval;
-    };
-
-struct x86_fpu_reg {
-    union x86_fpu_reg_u reg;
-    char                tag;
-    };
-
-/*
- * Since we are not going to worry about the problems of aliasing
- * registers, every time a register is modified, its result type is
- * set in the tag fields for that register.  If some operation
- * attempts to access the type in a way inconsistent with its current
- * storage format, then we flag the operation.  If common, we'll
- * attempt the conversion.
- */
-
-#define  X86_FPU_VALID          0x80
-#define  X86_FPU_REGTYP(r)      ((r) & 0x7F)
-
-#define  X86_FPU_WORD           0x0
-#define  X86_FPU_SHORT          0x1
-#define  X86_FPU_LONG           0x2
-#define  X86_FPU_FLOAT          0x3
-#define  X86_FPU_DOUBLE         0x4
-#define  X86_FPU_LDBL           0x5
-#define  X86_FPU_BSD            0x6
-
-#define  X86_FPU_STKTOP  0
-
-struct x86_fpu_registers {
-    struct x86_fpu_reg  x86_fpu_stack[8];
-    int                 x86_fpu_flags;
-    int                 x86_fpu_config;         /* rounding modes, etc. */
-    short               x86_fpu_tos, x86_fpu_bos;
-    };
-
-#pragma pack()
-
-/*
- * There are two versions of the following macro.
- *
- * One version is for opcode D9, for which there are more than 32
- * instructions encoded in the second byte of the opcode.
- *
- * The other version, deals with all the other 7 i87 opcodes, for
- * which there are only 32 strings needed to describe the
- * instructions.
- */
-
-#endif /* X86_FPU_SUPPORT */
-
-#ifdef DEBUG
-# define DECODE_PRINTINSTR32(t,mod,rh,rl)       \
-    DECODE_PRINTF(t[(mod<<3)+(rh)]);
-# define DECODE_PRINTINSTR256(t,mod,rh,rl)      \
-    DECODE_PRINTF(t[(mod<<6)+(rh<<3)+(rl)]);
-#else
-# define DECODE_PRINTINSTR32(t,mod,rh,rl)
-# define DECODE_PRINTINSTR256(t,mod,rh,rl)
-#endif
-
-#endif /* __X86EMU_FPU_REGS_H */
diff --git a/board/MAI/bios_emulator/scitech/include/x86emu/regs.h b/board/MAI/bios_emulator/scitech/include/x86emu/regs.h
deleted file mode 100644
index a12017b00f..0000000000
--- a/board/MAI/bios_emulator/scitech/include/x86emu/regs.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/****************************************************************************
-*
-*                       Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*                    Copyright (C) David Mosberger-Tang
-*                      Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for x86 register definitions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_REGS_H
-#define __X86EMU_REGS_H
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/*
- * General EAX, EBX, ECX, EDX type registers.  Note that for
- * portability, and speed, the issue of byte swapping is not addressed
- * in the registers.  All registers are stored in the default format
- * available on the host machine.  The only critical issue is that the
- * registers should line up EXACTLY in the same manner as they do in
- * the 386.  That is:
- *
- * EAX & 0xff  === AL
- * EAX & 0xffff == AX
- *
- * etc.  The result is that alot of the calculations can then be
- * done using the native instruction set fully.
- */
-
-#ifdef  __BIG_ENDIAN__
-
-typedef struct {
-    u32 e_reg;
-    } I32_reg_t;
-
-typedef struct {
-    u16 filler0, x_reg;
-    } I16_reg_t;
-
-typedef struct {
-    u8 filler0, filler1, h_reg, l_reg;
-    } I8_reg_t;
-
-#else /* !__BIG_ENDIAN__ */
-
-typedef struct {
-    u32 e_reg;
-    } I32_reg_t;
-
-typedef struct {
-    u16 x_reg;
-    } I16_reg_t;
-
-typedef struct {
-    u8 l_reg, h_reg;
-    } I8_reg_t;
-
-#endif /* BIG_ENDIAN */
-
-typedef union {
-    I32_reg_t   I32_reg;
-    I16_reg_t   I16_reg;
-    I8_reg_t    I8_reg;
-    } i386_general_register;
-
-struct i386_general_regs {
-    i386_general_register A, B, C, D;
-    };
-
-typedef struct i386_general_regs Gen_reg_t;
-
-struct i386_special_regs {
-    i386_general_register SP, BP, SI, DI, IP;
-    u32 FLAGS;
-    };
-
-/*
- * Segment registers here represent the 16 bit quantities
- * CS, DS, ES, SS.
- */
-
-struct i386_segment_regs {
-    u16 CS, DS, SS, ES, FS, GS;
-    };
-
-/* 8 bit registers */
-#define R_AH  gen.A.I8_reg.h_reg
-#define R_AL  gen.A.I8_reg.l_reg
-#define R_BH  gen.B.I8_reg.h_reg
-#define R_BL  gen.B.I8_reg.l_reg
-#define R_CH  gen.C.I8_reg.h_reg
-#define R_CL  gen.C.I8_reg.l_reg
-#define R_DH  gen.D.I8_reg.h_reg
-#define R_DL  gen.D.I8_reg.l_reg
-
-/* 16 bit registers */
-#define R_AX  gen.A.I16_reg.x_reg
-#define R_BX  gen.B.I16_reg.x_reg
-#define R_CX  gen.C.I16_reg.x_reg
-#define R_DX  gen.D.I16_reg.x_reg
-
-/* 32 bit extended registers */
-#define R_EAX  gen.A.I32_reg.e_reg
-#define R_EBX  gen.B.I32_reg.e_reg
-#define R_ECX  gen.C.I32_reg.e_reg
-#define R_EDX  gen.D.I32_reg.e_reg
-
-/* special registers */
-#define R_SP  spc.SP.I16_reg.x_reg
-#define R_BP  spc.BP.I16_reg.x_reg
-#define R_SI  spc.SI.I16_reg.x_reg
-#define R_DI  spc.DI.I16_reg.x_reg
-#define R_IP  spc.IP.I16_reg.x_reg
-#define R_FLG spc.FLAGS
-
-/* special registers */
-#define R_SP  spc.SP.I16_reg.x_reg
-#define R_BP  spc.BP.I16_reg.x_reg
-#define R_SI  spc.SI.I16_reg.x_reg
-#define R_DI  spc.DI.I16_reg.x_reg
-#define R_IP  spc.IP.I16_reg.x_reg
-#define R_FLG spc.FLAGS
-
-/* special registers */
-#define R_ESP  spc.SP.I32_reg.e_reg
-#define R_EBP  spc.BP.I32_reg.e_reg
-#define R_ESI  spc.SI.I32_reg.e_reg
-#define R_EDI  spc.DI.I32_reg.e_reg
-#define R_EIP  spc.IP.I32_reg.e_reg
-#define R_EFLG spc.FLAGS
-
-/* segment registers */
-#define R_CS  seg.CS
-#define R_DS  seg.DS
-#define R_SS  seg.SS
-#define R_ES  seg.ES
-#define R_FS  seg.FS
-#define R_GS  seg.GS
-
-/* flag conditions   */
-#define FB_CF 0x0001            /* CARRY flag  */
-#define FB_PF 0x0004            /* PARITY flag */
-#define FB_AF 0x0010            /* AUX  flag   */
-#define FB_ZF 0x0040            /* ZERO flag   */
-#define FB_SF 0x0080            /* SIGN flag   */
-#define FB_TF 0x0100            /* TRAP flag   */
-#define FB_IF 0x0200            /* INTERRUPT ENABLE flag */
-#define FB_DF 0x0400            /* DIR flag    */
-#define FB_OF 0x0800            /* OVERFLOW flag */
-
-/* 80286 and above always have bit#1 set */
-#define F_ALWAYS_ON  (0x0002)   /* flag bits always on */
-
-/*
- * Define a mask for only those flag bits we will ever pass back
- * (via PUSHF)
- */
-#define F_MSK (FB_CF|FB_PF|FB_AF|FB_ZF|FB_SF|FB_TF|FB_IF|FB_DF|FB_OF)
-
-/* following bits masked in to a 16bit quantity */
-
-#define F_CF 0x0001             /* CARRY flag  */
-#define F_PF 0x0004             /* PARITY flag */
-#define F_AF 0x0010             /* AUX  flag   */
-#define F_ZF 0x0040             /* ZERO flag   */
-#define F_SF 0x0080             /* SIGN flag   */
-#define F_TF 0x0100             /* TRAP flag   */
-#define F_IF 0x0200             /* INTERRUPT ENABLE flag */
-#define F_DF 0x0400             /* DIR flag    */
-#define F_OF 0x0800             /* OVERFLOW flag */
-
-#define TOGGLE_FLAG(flag)       (M.x86.R_FLG ^= (flag))
-#define SET_FLAG(flag)          (M.x86.R_FLG |= (flag))
-#define CLEAR_FLAG(flag)        (M.x86.R_FLG &= ~(flag))
-#define ACCESS_FLAG(flag)       (M.x86.R_FLG & (flag))
-#define CLEARALL_FLAG(m)        (M.x86.R_FLG = 0)
-
-#define CONDITIONAL_SET_FLAG(COND,FLAG) \
-  if (COND) SET_FLAG(FLAG); else CLEAR_FLAG(FLAG)
-
-#define F_PF_CALC 0x010000      /* PARITY flag has been calced    */
-#define F_ZF_CALC 0x020000      /* ZERO flag has been calced      */
-#define F_SF_CALC 0x040000      /* SIGN flag has been calced      */
-
-#define F_ALL_CALC      0xff0000        /* All have been calced   */
-
-/*
- * Emulator machine state.
- * Segment usage control.
- */
-#define SYSMODE_SEG_DS_SS       0x00000001
-#define SYSMODE_SEGOVR_CS       0x00000002
-#define SYSMODE_SEGOVR_DS       0x00000004
-#define SYSMODE_SEGOVR_ES       0x00000008
-#define SYSMODE_SEGOVR_FS       0x00000010
-#define SYSMODE_SEGOVR_GS       0x00000020
-#define SYSMODE_SEGOVR_SS       0x00000040
-#define SYSMODE_PREFIX_REPE     0x00000080
-#define SYSMODE_PREFIX_REPNE    0x00000100
-#define SYSMODE_PREFIX_DATA     0x00000200
-#define SYSMODE_PREFIX_ADDR     0x00000400
-#define SYSMODE_INTR_PENDING    0x10000000
-#define SYSMODE_EXTRN_INTR      0x20000000
-#define SYSMODE_HALTED          0x40000000
-
-#define SYSMODE_SEGMASK (SYSMODE_SEG_DS_SS      | \
-			 SYSMODE_SEGOVR_CS      | \
-			 SYSMODE_SEGOVR_DS      | \
-			 SYSMODE_SEGOVR_ES      | \
-			 SYSMODE_SEGOVR_FS      | \
-			 SYSMODE_SEGOVR_GS      | \
-			 SYSMODE_SEGOVR_SS)
-#define SYSMODE_CLRMASK (SYSMODE_SEG_DS_SS      | \
-			 SYSMODE_SEGOVR_CS      | \
-			 SYSMODE_SEGOVR_DS      | \
-			 SYSMODE_SEGOVR_ES      | \
-			 SYSMODE_SEGOVR_FS      | \
-			 SYSMODE_SEGOVR_GS      | \
-			 SYSMODE_SEGOVR_SS      | \
-			 SYSMODE_PREFIX_DATA    | \
-			 SYSMODE_PREFIX_ADDR)
-
-#define  INTR_SYNCH           0x1
-#define  INTR_ASYNCH          0x2
-#define  INTR_HALTED          0x4
-
-typedef struct {
-    struct i386_general_regs    gen;
-    struct i386_special_regs    spc;
-    struct i386_segment_regs    seg;
-    /*
-     * MODE contains information on:
-     *  REPE prefix             2 bits  repe,repne
-     *  SEGMENT overrides       5 bits  normal,DS,SS,CS,ES
-     *  Delayed flag set        3 bits  (zero, signed, parity)
-     *  reserved                6 bits
-     *  interrupt #             8 bits  instruction raised interrupt
-     *  BIOS video segregs      4 bits
-     *  Interrupt Pending       1 bits
-     *  Extern interrupt        1 bits
-     *  Halted                  1 bits
-     */
-    long                        mode;
-    u8                          intno;
-    volatile int                intr;   /* mask of pending interrupts */
-    int                         debug;
-#ifdef DEBUG
-    int                         check;
-    u16                         saved_ip;
-    u16                         saved_cs;
-    int                         enc_pos;
-    int                         enc_str_pos;
-    char                        decode_buf[32]; /* encoded byte stream  */
-    char                        decoded_buf[256]; /* disassembled strings */
-#endif
-    } X86EMU_regs;
-
-/****************************************************************************
-REMARKS:
-Structure maintaining the emulator machine state.
-
-MEMBERS:
-x86             - X86 registers
-mem_base        - Base real mode memory for the emulator
-mem_size        - Size of the real mode memory block for the emulator
-****************************************************************************/
-typedef struct {
-    X86EMU_regs     x86;
-    unsigned long   mem_base;
-    unsigned long   mem_size;
-    void*           private;
-    } X86EMU_sysEnv;
-
-#pragma pack()
-
-/*----------------------------- Global Variables --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {                        /* Use "C" linkage when in C++ mode */
-#endif
-
-/* Global emulator machine state.
- *
- * We keep it global to avoid pointer dereferences in the code for speed.
- */
-
-extern    X86EMU_sysEnv _X86EMU_env;
-#define   M             _X86EMU_env
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-/* Function to log information at runtime */
-
-/*void    printk(const char *fmt, ...); */
-
-#ifdef  __cplusplus
-}                                   /* End of "C" linkage for C++       */
-#endif
-
-#endif /* __X86EMU_REGS_H */
diff --git a/board/MAI/bios_emulator/scitech/include/x86emu/types.h b/board/MAI/bios_emulator/scitech/include/x86emu/types.h
deleted file mode 100644
index 0a17c547ee..0000000000
--- a/board/MAI/bios_emulator/scitech/include/x86emu/types.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-*
-*                       Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*                    Copyright (C) David Mosberger-Tang
-*                      Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for x86 emulator type definitions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_TYPES_H
-#define __X86EMU_TYPES_H
-
-#include <sys/types.h>
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* Currently only for Linux/32bit */
-#if defined(__GNUC__) && !defined(NO_LONG_LONG)
-#define __HAS_LONG_LONG__
-#endif
-
-typedef unsigned char       u8;
-typedef unsigned short      u16;
-typedef unsigned int        u32;
-#ifdef __HAS_LONG_LONG__
-typedef unsigned long long  u64;
-#endif
-
-typedef char                s8;
-typedef short               s16;
-typedef long                s32;
-#ifdef __HAS_LONG_LONG__
-typedef long long           s64;
-#endif
-
-/*typedef unsigned int      uint;*/
-typedef int                 sint;
-
-typedef u16 X86EMU_pioAddr;
-
-#endif  /* __X86EMU_TYPES_H */
diff --git a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc.so/readme.txt b/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc.so/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc.so/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc/readme.txt b/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/glibc/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc.so/readme.txt b/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc.so/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc.so/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc/readme.txt b/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/debug/linux/gcc/libc/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc.so/readme.txt b/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc.so/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc.so/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc/readme.txt b/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/glibc/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc.so/readme.txt b/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc.so/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc.so/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc/readme.txt b/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc/readme.txt
deleted file mode 100644
index 0d87effa99..0000000000
--- a/board/MAI/bios_emulator/scitech/lib/release/linux/gcc/libc/readme.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file is just to ensure that the directory is created.
diff --git a/board/MAI/bios_emulator/scitech/makedefs/bc16.mk b/board/MAI/bios_emulator/scitech/makedefs/bc16.mk
deleted file mode 100644
index aa4fe76a40..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/bc16.mk
+++ /dev/null
@@ -1,137 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Borland C++ 4.x 16 bit version. Supports 16 bit DOS,
-#               DPMI16 DOS extender and 16 bit Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : USE_WIN16 USE_BC5 BC_LIBBASE USE_WIN95
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := bcc
-   CFLAGS       := -ml -H=bcc.sym -i60 -d -dc -4 -f287
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-.ELSE
-   AS           := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /iINCLUDE /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := bclink tlink.exe
-   LDFLAGS      := -c
-   RC           := brc
-   RCFLAGS      :=
-.IF $(USE_BC5)
-.IF $(USE_WIN95)
-   WIN_VERSION  := -V4.0
-.ENDIF
-.ENDIF
-   LIBR         := tlib
-   LIBFLAGS     := /C /P32
-   ILIB         := implib
-   ILIBFLAGS    := -c
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -v
-   LDFLAGS      += -v
-   ASFLAGS      += /zi
-   LIBFLAGS     += /P128
-.ELSE
-   LDFLAGS      += -x
-   ASFLAGS      += /q
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -O2 -k-
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1 -k-
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -DFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-
-# Optionally compile as Win16
-.IF $(USE_WIN16)
-.IF $(BUILD_DLL)
-   CFLAGS       += -WD -Fs- -DBUILD_DLL
-   ASFLAGS      += -DBUILD_DLL
-.ELSE
-   CFLAGS       += -W -Fs-
-.ENDIF
-   DEF_LIBS		:= import.lib mathwl.lib cwl.lib
-   DX_ASFLAGS   += -D__WINDOWS16__
-   LIB_OS       = WIN16
-.ELSE
-   USE_REALDOS	:= 1
-   DEF_LIBS     := mathl.lib fp87.lib cl.lib
-   LIB_OS       = DOS16
-.END
-
-# Place to look for PMODE library files
-
-.IF $(USE_DPMI16)
-PMLIB           := dpmi16\pm.lib
-.ELSE
-PMLIB           := pm.lib
-.END
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(BC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= bc16.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/bc3.mk b/board/MAI/bios_emulator/scitech/makedefs/bc3.mk
deleted file mode 100644
index 133d80edf7..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/bc3.mk
+++ /dev/null
@@ -1,102 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Borland C++ 3.1 version. Supports 16 bit DOS development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := bcc
-   CFLAGS       := -ml -H=bcc.sym -i60 -d
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-.ELSE
-   AS           := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := bclink tlink.exe
-   LDFLAGS      := -c
-   LIB          := tlib
-   LIBFLAGS     := /C
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -v
-   LDFLAGS      += -v
-   ASFLAGS      += /zi
-   LIBFLAGS     += /P128
-.ELSE
-   LDFLAGS      += -x
-   ASFLAGS      += /q
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -3 -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -3 -O1
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -f287 -DFPU387
-   ASFLAGS      += -DFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-   USE_REALDOS	:= 1
-
-# Define the default libraries to link with
-   DEF_LIBS		:= mathl.lib cl.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST     := $(LIB_BASE_DIR)\dos16\bc3
-
-# Define which file contains our rules
-
-   RULES_MAK	:= bc3.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/bc32.mk b/board/MAI/bios_emulator/scitech/makedefs/bc32.mk
deleted file mode 100644
index 246de1dfc5..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/bc32.mk
+++ /dev/null
@@ -1,201 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Borland C++ 4.0 32 bit version. Supports Borland's DOS Power
-#               Pack DPMI32 DOS extender, Phar Lap's TNT DOS Extender and
-#               32 bit Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : USE_SMX32 USE_TNT USE_WIN32 USE_BC5 USE_VXD BC_LIBBASE
-.IMPORT .IGNORE : VTOOLSD
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := bcc32
-.IF $(USE_VXD)
-   CFLAGS       := -4 -i60 -d -w-stu
-.ELSE
-   CFLAGS       := -4 -H=bcc32.sym -i60 -d -w-stu
-.ENDIF
-.IF $(USE_NASM)
-   AS			:= nasm
-   ASFLAGS      := -t -f obj -d__FLAT__ -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-.ELSE
-   AS           := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /w-res /w-mcp /D__FLAT__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := bclink tlink32.exe
-   LDFLAGS      := -c
-   RC           := brc32
-.IF $(USE_BC5)
-   WIN_VERSION  := -V4.0
-   RCFLAGS      := -32
-.ELSE
-   RCFLAGS      := -w32
-.ENDIF
-   LIB          := tlib
-   LIBFLAGS     := /C
-   ILIB         := implib
-   ILIBFLAGS    := -c
-   INTEL_X86	:= 1
-   NMSYM   		:= $(SOFTICE_PATH)\nmsym.exe
-   NMSYMFLAGS	:= /TRANSLATE:source,package,always /PROMPT /SOURCE:$(SCITECH)\src\pm;$(SCITECH)\src\pm\common;$(SCITECH)\src\pm\win32
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -v
-   LDFLAGS      += -v
-   LIBFLAGS     += /P256
-.IF $(USE_NASM)
-   ASFLAGS      += -F borland -g
-.ELSE
-   ASFLAGS      += /zi
-.ENDIF
-.ELSE
-   LDFLAGS      += -x
-   LIBFLAGS		+= /P128
-.IF $(USE_NASM)
-   ASFLAGS      += -F null
-.ELSE
-   ASFLAGS      += /q
-.ENDIF
-.END
-
-# Optionally disable nagging warnings if MAX_WARN is not on
-.IF $(MAX_WARN)
-.ELSE
-   CFLAGS		+= -w-aus -w-par -w-hid -w-pia
-.ENDIF
-
-# Optionally turn on optimisations (-5 -O2 breaks BC++ 4.0-4.5 sometimes)
-.IF $(OPT)
-   CFLAGS       += -5 -O2 -k-
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -5 -O1 -k-
-.END
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# Optionally use Phar Lap's TNT DOS Extender, otherwise use the DOS Power Pack
-.IF $(USE_TNT)
-   CFLAGS       += -D__MSDOS__
-   DX_CFLAGS    += -DTNT
-   DX_ASFLAGS   += -dTNT
-   LIB_OS       = DOS32
-   DEF_LIBS		:= import32.lib cw32.lib dosx32.lib tntapi.lib
-.ELIF $(USE_VXD)
-   LDFLAGS		+= -n -P- -x
-   CFLAGS       += -RT- -x- -Oi -VC -I$(VTOOLSD)\INCLUDE -DIS_32 -DWANTVXDWRAPS -DVTOOLSD -DWIN40 -DWIN40_OR_LATER -DDEFSEG=1 -zC_LTEXT -zALCODE -zR_LDATA -zTLCODE
-   DEF_LIBS		:= $(VTOOLSD)\lib\cfbc440d.lib $(VTOOLSD)\lib\wr0bc440.lib $(VTOOLSD)\lib\wr1bc440.lib $(VTOOLSD)\lib\wr2bc440.lib $(VTOOLSD)\lib\wr3bc440.lib $(VTOOLSD)\lib\rtbc440d.lib
-   DX_ASFLAGS   += -d__VXD__ -d__BORLANDC__=1 -I$(VTOOLSD)\INCLUDE -I$(VTOOLSD)\LIB\INCLUDE
-   LIB_OS       = VXD
-.ELIF $(USE_WIN32)
-.IF $(WIN32_GUI)
-.ELSE
-    CFLAGS       += -D__CONSOLE__
-.ENDIF
-.IF $(BUILD_DLL)
-   CFLAGS       += -WD -DBUILD_DLL
-   ASFLAGS      += -dBUILD_DLL
-.ELSE
-   CFLAGS       += -W -WM
-.ENDIF
-.IF $(USE_BC5)
-.ELSE
-   CFLAGS		+= -D_WIN32
-.ENDIF
-   DEF_LIBS		:= import32.lib cw32mt.lib
-   DX_ASFLAGS   += -d__WINDOWS32__
-   LIB_OS       = WIN32
-.ELIF $(USE_SMX32)
-   CFLAGS       += -D__SMX32__ -DPME32
-   DX_CFLAGS    +=
-   DX_ASFLAGS   += -d__SMX32__ -dDPMI32 -dPME32
-   USE_REALDOS	:= 1
-   LIB_OS       = SMX32
-   DEF_LIBS     := cw32mt.lib
-.ELSE
-   USE_DPMI32   := 1
-   CFLAGS       += -D__MSDOS__
-   DX_CFLAGS    += -WX -DDPMI32
-   DX_ASFLAGS   += -dDPMI32
-   USE_REALDOS	:= 1
-   LIB_OS       = DOS32
-   DEF_LIBS		:=
-.END
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(BC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Place to look for PMODE library files
-
-.IF $(USE_TNT)
-PMLIB           := $(LIB_BASE)\tnt\pm.lib
-.ELIF $(USE_DPMI32)
-PMLIB           := $(LIB_BASE)\dpmi32\pm.lib
-.ELSE
-PMLIB           := $(LIB_BASE)\pm.lib
-.END
-
-# Define which file contains our rules
-
-   RULES_MAK	:= bc32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/bcos2.mk b/board/MAI/bios_emulator/scitech/makedefs/bcos2.mk
deleted file mode 100644
index 23aeb7cde4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/bcos2.mk
+++ /dev/null
@@ -1,137 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Borland C++ 2.0 32-bit OS/2 version.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : USE_OS2GUI BC_LIBBASE
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := bcc
-   CFLAGS       := -w- -4 -H=bcc32.sym -i60 -d
-.IF $(USE_NASM)
-   AS           := nasm
-   ASFLAGS      := -t -f obj -d__FLAT__ -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-   AS           := tasm
-   ASFLAGS      := /t /mx /m /D__FLAT__ /D__OS2__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := bclink tlink.exe
-   LDFLAGS      := -c
-   RC           := brcc
-   RCFLAGS      :=
-   LIB          := tlib
-   LIBFLAGS     := /C /P32
-   ILIB         := implib
-   ILIBFLAGS    := -c
-.IF $(USE_OS2GUI)
-   CFLAGS		+= -D__OS2_PM__
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -v
-   LDFLAGS      += -v
-   LIBFLAGS     += /P128
-.IF $(USE_NASM)
-   ASFLAGS      += -F borland
-.ELSE
-   ASFLAGS      += /zi
-.ENDIF
-.ELSE
-   LDFLAGS      += -x
-.IF $(USE_NASM)
-   ASFLAGS      += -F null
-.ELSE
-   ASFLAGS      += /q
-.ENDIF
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -5 -O2 -k-
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -5 -O1 -k-
-.END
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# Optionally use Phar Lap's TNT DOS Extender, otherwise use the DOS Power Pack
-.IF $(BUILD_DLL)
-   CFLAGS       += -sd -sm -DBUILD_DLL
-   ASFLAGS      += -dBUILD_DLL
-.ELSE
-   CFLAGS       += -sm
-.ENDIF
-   DEF_LIBS	:= os2.lib c2mt.lib
-   DX_ASFLAGS   += -d__OS2__
-   LIB_OS       = os232
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS          += -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(BC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Place to look for PMODE library files
-
-.IF $(USE_OS2GUI)
-DEF_LIBS        += pm_pm.lib
-.ELSE
-DEF_LIBS        += pm.lib
-.ENDIF
-
-# Define which file contains our rules
-
-   RULES_MAK	:= bcos2.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/cl16.mk b/board/MAI/bios_emulator/scitech/makedefs/cl16.mk
deleted file mode 100644
index 0f29a1521e..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/cl16.mk
+++ /dev/null
@@ -1,132 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Microsoft C 6.0 16 bit version. Supports 16 bit
-#               OS/2 development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : VC_LIBBASE
-.IMPORT .IGNORE : USE_MASM
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := cl       # C-compiler and flags
-   CFLAGS       := /w /Gs
-   ASFLAGS      := /t /mx /m /D__COMM__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELIF $(USE_MASM)
-   AS           := masm    # Assembler and flags
-   ASFLAGS      := /D__COMM__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   LD           := cl       # Loader and flags
-   LDFLAGS       = $(CFLAGS)
-   RC           := rc       # WIndows resource compiler
-   RCFLAGS      :=
-   LIB          := lib      # Librarian
-   LIBFLAGS     := /NOI /NOE
-   ILIB         := implib   # Import librarian
-   ILIBFLAGS    := /noignorecase
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += /Zi  # Turn on debugging for C compiler
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += /Ox
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += /FPi87 /DFPU387
-   ASFLAGS      += /DFPU387 /DFPU_REG_RTN
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += /DBETA
-   ASFLAGS      += /DBETA
-.END
-
-# Use a larger stack during linking if requested ???? How the fuck do you
-# specify linker options on the CL command line?????
-
-.IF $(STKSIZE)
-.ENDIF
-
-# Optionally compile for 16 bit Windows
-.IF $(USE_WIN16)
-.IF $(BUILD_DLL)
-   CFLAGS       += /GD /Alfw /DBUILD_DLL
-   ASFLAGS      += -DBUILD_DLL
-.ELSE
-   CFLAGS       += /GA /AL
-.ENDIF
-   DX_ASFLAGS   += -D__WINDOWS16__
-   LIB_OS       = WIN16
-.ELSE
-   USE_REALDOS	:= 1
-   CFLAGS       += /AL
-   LIB_OS       = DOS16
-.END
-
-# Place to look for PMODE library files
-
-PMLIB           := pm.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(VC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= cl16.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/cl386.mk b/board/MAI/bios_emulator/scitech/makedefs/cl386.mk
deleted file mode 100644
index 52157f91f4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/cl386.mk
+++ /dev/null
@@ -1,120 +0,0 @@
-#############################################################################
-#
-#                                       SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Microsoft 386 C 6.0 32 bit. Supports 32 bit
-#               OS/2 development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : CL_LIBBASE USE_VDD
-.IMPORT .IGNORE : USE_MASM
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := cl386       # C-compiler and flags
-   # NB: The -Zf flag is ABSOLUTELY NECESSARY to compile IBM's OS/2 headers.
-   #     It isn't documented anywhere but obviously adds support for 48-bit
-   #     far pointers (ie. _far is valid in 32-bit code). Great.
-   CFLAGS       := -G3s -Zf -D__386__
-   ASFLAGS      := /t /mx /m /oi /D__FLAT__ /DSTDCALL_MANGLE /D__NOU_VAR__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx   # Assembler and flags
-.ELIF $(USE_MASM)
-   AS           := masm    # Assembler and flags
-   ASFLAGS      := /t /mx /D__FLAT__ /DSTDCALL_MANGLE /D__NOU_VAR__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   LD           := link386  # Linker and flags
-   LDFLAGS       = $(CFLAGS)
-   RC           := rc       # Windows resource compiler
-   RCFLAGS      :=
-   LIB          := lib      # Librarian
-   LIBFLAGS     := /NOI /NOE
-   ILIB         := implib   # Import librarian
-   ILIBFLAGS    := /noignorecase
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -Zi      # Turn on debugging for C compiler
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += /Ox
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += /FPi87 /DFPU387
-   ASFLAGS      += /DFPU387 /DFPU_REG_RTN
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += /DBETA
-   ASFLAGS      += /DBETA
-.END
-
-# Use a larger stack during linking if requested ???? How the fuck do you
-# specify linker options on the CL command line?????
-
-.IF $(STKSIZE)
-.ENDIF
-
-# Place to look for PMODE library files
-
-PMLIB           := pm.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\debug
-CFLAGS                  += -DCHECKED=1
-.ELSE
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_OS       = os232
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(CL_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK    := cl386.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/common.mk b/board/MAI/bios_emulator/scitech/makedefs/common.mk
deleted file mode 100644
index d337152e74..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/common.mk
+++ /dev/null
@@ -1,180 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Common makefile targets used by all SciTech Software
-#               makefiles. This file includes targets for cleaning the
-#               current directory, and maintaining the source files with
-#               RCS.
-#
-#############################################################################
-
-# Override global OpenGL includes when compiling against MGL version
-
-.IF $(USE_MGL_OPENGL)
-.IF $(UNIX_HOST)
-CFLAGS		+= -I$(SCITECH)/include/mglgl
-DEPEND_INC	+= $(SCITECH)/include/mglgl
-.ELSE
-CFLAGS		+= -I$(SCITECH)\include\mglgl
-DEPEND_INC	+= $(SCITECH)\include/mglgl
-.ENDIF
-.ENDIF
-
-# Define where to install all compiled DLL files
-
-.IF $(UNIX_HOST)
-.IF $(CHECKED)
-DLL_DEST    := $(SCITECH_LIB)/redist/debug
-.ELSE
-DLL_DEST    := $(SCITECH_LIB)/redist/release
-.ENDIF
-.ELSE
-.IF $(CHECKED)
-DLL_DEST    := $(SCITECH_LIB)\redist\debug
-.ELSE
-DLL_DEST    := $(SCITECH_LIB)\redist\release
-.ENDIF
-.ENDIF
-
-# Target to build the library and DLL file if specified
-
-.IF $(LIBFILE)
-
-lib: $(LIBFILE)
-
-.IF $(DLLFILE)
-
-# Build and install a DLL file, or simply build import library and install
-
-.IF $(BUILD_DLL)
-
-$(DLLFILE): $(OBJECTS)
-$(LIBFILE): $(DLLFILE)
-install: $(LIBFILE) $(DLLFILE)
-	$(INSTALL) $(LIBFILE) $(LIB_DEST)$(LIB_EXTENDER)
-	$(INSTALL) $(DLLFILE) $(DLL_DEST)
-.IF $(USE_SOFTICE)
-	$(INSTALL) $(DLLFILE:s/.dll/.nms) $(DLL_DEST)
-.ENDIF
-.ELSE
-
-$(LIBFILE): $(DLL_DEST)\$(DLLFILE)
-install: $(LIBFILE)
-	$(INSTALL) $(LIBFILE) $(LIB_DEST)$(LIB_EXTENDER)
-
-.ENDIF
-.ELSE
-
-.IF $(BUILD_DLL)
-
-# Build and install a Unix shared library
-
-$(LIBFILE): $(OBJECTS)
-install: $(LIBFILE)
-	$(INSTALL) $(LIBFILE) $(LIB_DEST)$(LIB_EXTENDER)
-	$(INSTALL) $(LIBFILE) $(DLL_DEST)/$(LIBFILE).$(VERSION)
-
-.ELSE
-
-# Build and install a normal library file
-
-.IF $(USE_DLL)
-.ELSE
-$(LIBFILE): $(OBJECTS)
-install: $(LIBFILE)
-	$(INSTALL) $(LIBFILE) $(LIB_DEST)$(LIB_EXTENDER)
-.ENDIF
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Build and install a VxD file, including debug information
-
-.IF $(VXDFILE)
-$(VXDFILE:s/.vxd/.dll): $(OBJECTS)
-$(VXDFILE): $(VXDFILE:s/.vxd/.dll)
-install: $(VXDFILE)
-	$(INSTALL) $(VXDFILE) $(DLL_DEST)
-.IF $(DBG)
-	$(INSTALL) $(VXDFILE:s/.vxd/.nms) $(DLL_DEST)
-.ENDIF
-.ENDIF
-
-# Clean up directory removing all files not needed to make the library.
-
-__CLEAN_FILES := *.obj *.o *.sym *.bak *.tdk *.swp *.map *.err *.csm *.lib *.aps *.nms *.sys
-__CLEAN_FILES += *.~* *.td *.tr *.tr? *.td? *.rws *.res *.exp *.ilk *.pdb *.pch *.a bcc32.*
-__CLEAN_FILES += $(LIBCLEAN)
-__CLEANEXE_FILES := $(__CLEAN_FILES) *$E *.drv *.rex *.dll *.vxd *.nms *.pel *.smf *.so.*
-
-.PHONY clean:
-	@$(RM) -f -S $(mktmp $(__CLEAN_FILES:t"\n"))
-
-.PHONY cleanexe:
-	@$(RM) -f -S $(mktmp $(__CLEANEXE_FILES:t"\n"))
-
-# Define the source directories to find common files
-
-.IF $(NO_SCITECH_COMMON)
-.ELSE
-.SOURCE:		   $(SCITECH)/src/common
-.ENDIF
-
-# Create the include file dependencies using the MKUTIL makedep program if
-# the list of dependent object files is defined
-
-.IF $(DEPEND_OBJ)
-depend:
-	@$(RM) -f makefile.dep
-.IF $(DEPEND_SRC)
-.IF $(DEPEND_INC)
-	@makedep -amakefile.dep -r -s -I@$(mktmp $(DEPEND_INC:s/\/\\)) -S@$(mktmp $(DEPEND_SRC:s/\/\\);$(SCITECH)/src/common) @$(mktmp $(DEPEND_OBJ:t"\n")\n)
-.ELSE
-	@makedep -amakefile.dep -r -s -S@$(mktmp $(DEPEND_SRC:s/\/\\);$(SCITECH)/src/common) @$(mktmp $(DEPEND_OBJ:t"\n")\n)
-.ENDIF
-.ELSE
-.IF $(DEPEND_INC)
-	@makedep -amakefile.dep -r -s -I@$(mktmp $(DEPEND_INC:s/\/\\)) -S@$(mktmp $(SCITECH)/src/common) @$(mktmp $(DEPEND_OBJ:t"\n")\n)
-.ELSE
-	@makedep -amakefile.dep -r -s -S@$(mktmp $(SCITECH)/src/common) @$(mktmp $(DEPEND_OBJ:t"\n")\n)
-.ENDIF
-.ENDIF
-	@$(ECHO) Object file dependency information generated.
-.ENDIF
-
-# Set up for compiling Snap executeables and dynamic link libraries
-
-.IF $(USE_SNAP)
-#CFLAGS     	+= -I$(PRIVATE)\include\drvlib -I$(SCITECH)\include\drvlib -D__SNAP__
-CFLAGS     	+= -D__SNAP__
-ASFLAGS   	+= -d__SNAP__
-#EXELIBS		+= snap$L
-.ENDIF
-
-# Include rule definitions for the compiler
-
-.INCLUDE: "$(SCITECH)/makedefs/rules/$(RULES_MAK)"
-
-# Include file dependencies
-
-.INCLUDE .IGNORE: "makefile.dep"
diff --git a/board/MAI/bios_emulator/scitech/makedefs/emx.mk b/board/MAI/bios_emulator/scitech/makedefs/emx.mk
deleted file mode 100644
index f569790a3c..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/emx.mk
+++ /dev/null
@@ -1,194 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               OS/2 version for EMX/GNU C/C++.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE CRTDLL SHW BETA CHECKED NO_EXCEPT NO_RTTI
-.IMPORT .IGNORE : FULLSCREEN SHOW_ARGS
-   TMPDIR       := $(TEMP)
-
-# Standard file suffix definitions
-   L            := .lib         # Libraries
-   E            := .exe         # Executables
-   O            := .obj         # Objects
-   A            := .asm         # Assembler sources
-   S            := .s           # GNU assembler sources
-   P            := .cpp         # C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           :=              # LP - Library file prefix (name of file on disk)
-   LL           := -l           # Library link prefix (name of library on link command line)
-   LE           :=              # Library link suffix (extension of library on link command line)
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : EMX_LIBBASE USE_OS232 USE_OS2GUI
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
-
-# Default commands for compiling, assembling linking and archiving.
-   CC           := gcc
-   CFLAGS       := -Zmt -Zomf -Wall -I. -I$(INCLUDE)
-   CXX          := gcc -x c++ -fno-exceptions -fno-rtti
-.IF $(USE_NASM)
-   AS           := nasm
-   ASFLAGS      := -t -f obj -F null -d__FLAT__ -d__NOU__ -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-   AS           := tasm     # Assembler and flags
-   ASFLAGS      := /t /mx /m /oi /D__FLAT__ /D__NOU__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := gcc
-   LDXX         := gcc -x c++
-   LDFLAGS      := -L. -Zomf -Zmt
-   LIB          := emxomfar
-   LIBFLAGS     := -p32 rcv
-
-   YACC         := bison -y
-   LEX          := flex
-   SED          := sed
-
-# Optionally turn off exceptions and RTTI for C++ code
-.IF $(NO_EXCEPT)
-   CXX          += -fno-exceptions
-.ENDIF
-.IF $(NO_RTTI)
-   CXX          += -fno-rtti
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g
-.ELSE
-# Without -s, emx always runs LINK386 with the /DEBUG option
-   CFLAGS       += -s
-   LDFLAGS      += -s
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -O6
-.ELIF $(OPT)
-   CFLAGS       += -O3 -fomit-frame-pointer
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -Os
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.ENDIF
-
-# Disable standard C runtime library
-.IF $(NO_RUNTIME)
-CFLAGS                  += -fno-builtin -nostdinc
-.ENDIF
-
-# Link against EMX DLLs (CRTDLL=1) or link with static C runtime libraries
-.IF $(CRTDLL)
-  LDFLAGS       += -Zcrtdll
-.ELSE
-  CFLAGS		+= -Zsys
-  LDFLAGS       += -Zsys
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__OS2_32__
-   CFLAGS       += -D__OS2__
-   ASFLAGS      += -d__OS2__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR    := $(SCITECH_LIB)/lib/debug
-CFLAGS          += -DCHECKED=1
-.ELSE
-LIB_BASE_DIR    := $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST     := $(LIB_BASE_DIR)\OS232\$(EMX_LIBBASE)
-   LDFLAGS      += -L$(LIB_DEST)
-
-# Build 32-bit OS/2 apps
-.IF $(BUILD_DLL)
-   CFLAGS       += -Zdll -DBUILD_DLL
-   LDFLAGS      += -Zdll
-   ASFLAGS      += -dBUILD_DLL
-.ELSE
-.IF $(USE_OS2GUI)
-   CFLAGS       += -D__OS2_PM__
-   LDFLAGS      += -Zlinker /PMTYPE:PM
-.ELSE
-.IF $(FULLSCREEN)
-   LDFLAGS      += -Zlinker /PMTYPE:NOVIO
-.ELSE
-   LDFLAGS      += -Zlinker /PMTYPE:VIO
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK    := emx.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/gcc_beos.mk b/board/MAI/bios_emulator/scitech/makedefs/gcc_beos.mk
deleted file mode 100644
index 0d62fdf1a8..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/gcc_beos.mk
+++ /dev/null
@@ -1,161 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               BeOS version for GNU C/C++.
-#
-#############################################################################
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE SHW BETA CHECKED USE_X11 USE_LINUX
-.IMPORT .IGNORE : USE_EGCS USE_PGCC STATIC_LIBS LIBC
-   TMPDIR       := $(TEMP)
-
-# Standard file suffix definitions
-#
-# NOTE: BeOS does not require any extenion for executeable files, but you
-#       can use an extension if you wish. We use the .x extension for building
-#       executeable files so that we can use implicit rules to make the
-#       makefiles simpler and more portable between systems. When you install
-#       the files to a local bin directory, you will probably want to remove
-#       the .x extension.
-   L            := .a   	# Libraries
-   E            := .x   	# Executables
-   O            := .o   	# Objects
-   A            := .asm   	# Assembler sources
-   S            := .s       # GNU assembler sources
-   P            := .cpp   	# C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           := 		    # Library link suffix (extension of library on link command line)
-
-# We use the Unix shell at all times
-   SHELLFLAGS   := -c
-
-# Definition of $(MAKE) macro for recursive makes.
-   MAKE = $(MAKECMD) $(MFLAGS)
-
-# Macro to install a library file
-   INSTALL      := cp
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
-
-# Define that we are compiling for BeOS
-   USE_BEOS     := 1
-
-# Default commands for compiling, assembling linking and archiving.
-   CC           := gcc
-   CFLAGS       := -Wall -I. -Iinclude $(INCLUDE)
-   CXX          := g++
-   AS           := nasm
-   ASFLAGS      := -f elf -d__FLAT__ -iinclude -i$(SCITECH)/include -d__NOU__
-   LD           := gcc
-   LDFLAGS      := -L.
-   LIB          := ar
-   LIBFLAGS     := rcs
-
-# Link to static libraries if requested
-.IF $(STATIC_LIBS)
-   LDFLAGS      += -static
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -O6
-.ELIF $(OPT)
-   CFLAGS       += -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.ENDIF
-
-# Disable standard C runtime library
-
-.IF $(NO_RUNTIME)
-CFLAGS			+= -fno-builtin -nostdinc
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__BEOS__
-   ASFLAGS      += -d__BEOS__ -d__UNIX__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/debug
-CFLAGS		+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-LIB_DEST     := $(LIB_BASE_DIR)/beos/gcc
-LDFLAGS      += -L$(LIB_DEST)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= gcc_beos.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/gcc_dos.mk b/board/MAI/bios_emulator/scitech/makedefs/gcc_dos.mk
deleted file mode 100644
index 65589c83a3..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/gcc_dos.mk
+++ /dev/null
@@ -1,112 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               DJGPP V2 port of GNU C/C++ to DOS with DPMI only.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Override some file suffix definitions
-   L            := .a     # Libraries
-   O            := .o     # Objects
-
-# Override the file prefix/suffix definitions for library naming.
-   LP           := lib		# LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           :=			# Library link suffix (extension of library on link command line)
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : DJ_LIBBASE
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := gcc      # C-compiler and flags
-   CFLAGS       := -Wall
-   AS			:= nasm
-   ASFLAGS      := -t -f coff -F null -d__FLAT__ -d__GNUC__ -dSTDCALL_USCORE -iINCLUDE -i$(SCITECH)\INCLUDE
-   LD           := dj_ld    # Loader and flags
-   LDFLAGS      :=
-   LIB          := ar       # Librarian
-   LIBFLAGS     := rs
-   USE_NASM		:= 1
-   USE_GCC		:= 1
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g       # Turn on debugging for C compiler
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# DOS extender dependant flags
-   DX_CFLAGS    +=
-   DX_ASFLAGS   += -dDJGPP
-   USE_REALDOS	:= 1
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST     := $(LIB_BASE_DIR)\DOS32\$(DJ_LIBBASE)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= dj32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/gcc_freebsd.mk b/board/MAI/bios_emulator/scitech/makedefs/gcc_freebsd.mk
deleted file mode 100644
index 0cb4b8530b..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/gcc_freebsd.mk
+++ /dev/null
@@ -1,174 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Linux version for GNU C/C++.
-#
-#############################################################################
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE SHW BETA CHECKED USE_X11 USE_FREEBSD
-.IMPORT .IGNORE : USE_EGCS USE_PGCC STATIC_LIBS
-   TMPDIR       := $(TEMP)
-
-# Standard file suffix definitions
-#
-# NOTE: Linux does not require any extenion for executeable files, but you
-#       can use an extension if you wish. We use the .x extension for building
-#       executeable files so that we can use implicit rules to make the
-#       makefiles simpler and more portable between systems. When you install
-#       the files to a local bin directory, you will probably want to remove
-#       the .x extension.
-   L            := .a   	# Libraries
-   E            := .x   	# Executables
-   O            := .o   	# Objects
-   A            := .asm   	# Assembler sources
-   S            := .s       # GNU assembler sources
-   P            := .cpp   	# C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           := 		    # Library link suffix (extension of library on link command line)
-
-# We use the Unix shell at all times
-   SHELL		:= /bin/sh
-   SHELLFLAGS   := -c
-
-# Definition of $(MAKE) macro for recursive makes.
-   MAKE = $(MAKECMD) $(MFLAGS)
-
-# Macro to install a library file
-   INSTALL      := cp
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
-
-# Define that we are compiling for FreeBSD
-   USE_LINUX    := 1
-
-# Default commands for compiling, assembling linking and archiving.
-.IF $(USE_EGCS)
-   CC           := egcs
-.ELIF $(USE_PGCC)
-   CC		:= pgcc
-.ELSE
-   CC           := gcc
-.ENDIF
-   CFLAGS       := -Wall -I. -Iinclude $(INCLUDE)
-   CXX          := g++
-   AS           := nasm
-# TODO: On earlier versions of FreeBSD (<3.0) a.out is used instead of ELF
-   ASFLAGS      := -f elf -d__FLAT__ -iinclude -i$(SCITECH)/include -d__NOU__
-   LD           := g++
-   LDFLAGS      := -L.
-   LIB          := ar
-   LIBFLAGS     := rcs
-
-# Link to static libraries if requested
-.IF $(STATIC_LIBS)
-   LDFLAGS      += -static
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -O6
-.ELIF $(OPT)
-   CFLAGS       += -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.ENDIF
-
-# Disable standard C runtime library
-
-.IF $(NO_RUNTIME)
-CFLAGS			+= -fno-builtin -nostdinc
-.ENDIF
-
-# Compile flag for whether to build X11 or non-X11 lib
-.IF $(USE_X11)
-   CFLAGS       += -D__X11__
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__FREEBSD__
-   ASFLAGS      += -d__FREEBSD__ -d__UNIX__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/debug
-CFLAGS		+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST     := $(LIB_BASE_DIR)/freebsd/gcc
-   LDFLAGS      += -L$(LIB_DEST)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= gcc_freebsd.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/gcc_linux.mk b/board/MAI/bios_emulator/scitech/makedefs/gcc_linux.mk
deleted file mode 100644
index 72c4cedfd4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/gcc_linux.mk
+++ /dev/null
@@ -1,180 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Linux version for GNU C/C++.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)/makedefs/startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : GCC2_LIBBASE
-
-# Override some file suffix definitions
-   L            := .a     # Libraries
-   O            := .o     # Objects
-
-# Override the file prefix/suffix definitions for library naming.
-   LP           := lib		# LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           :=			# Library link suffix (extension of library on link command line)
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Define that we are compiling for Linux
-   USE_LINUX    := 1
-
-# Default commands for compiling, assembling linking and archiving.
-   CC           := gcc
-   CFLAGS       := -Wall -I. -Iinclude -I$(SCITECH:s,\,/)/include -I$(PRIVATE:s,\,/)/include
-   SHOW_CFLAGS	:= -c
-   CXX          := g++
-   AS           := nasm
-   ASFLAGS      := -t -f elf -d__FLAT__ -d__GNUC__ -iinclude -i$(SCITECH)/include -d__NOU__
-   SHOW_ASFLAGS	:= -f elf
-   LD           := gcc
-   LDXX			:= g++
-   LDFLAGS      := -L.
-   LIB          := ar
-   LIBFLAGS     := rcs
-   YACC			:= bison -y
-   LEX			:= flex
-   SED			:= sed
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g
-   SHOW_CFLAGS  += -g
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -O6
-   SHOW_CFLAGS  += -O6
-.ELIF $(OPT)
-   CFLAGS       += -O2
-   SHOW_CFLAGS  += -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1
-   SHOW_CFLAGS  += -O1
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   SHOW_CFLAGS  += -DBETA
-   ASFLAGS      += -dBETA
-   SHOW_ASFLAGS += -dBETA
-.ENDIF
-
-# Disable standard C runtime library
-
-.IF $(NO_RUNTIME)
-CFLAGS			+= -fno-builtin -nostdinc
-.ENDIF
-
-# Compile flag for whether to build X11 or non-X11 lib
-.IF $(USE_X11)
-   CFLAGS       += -D__X11__
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__LINUX__
-   ASFLAGS      += -d__LINUX__ -d__UNIX__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/debug
-CFLAGS		    += -DCHECKED=1
-SHOW_CFLAGS	    += -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-.IF $(LIBC)
-   LIB_DEST_SHARED  := $(LIB_BASE_DIR)/linux/gcc/libc.so
-   LIB_DEST_STATIC  := $(LIB_BASE_DIR)/linux/gcc/libc
-.ELSE
-   LIB_DEST_SHARED  := $(LIB_BASE_DIR)/linux/gcc/glibc.so
-   LIB_DEST_STATIC  := $(LIB_BASE_DIR)/linux/gcc/glibc
-.ENDIF
-
-# Link to static libraries if requested
-.IF $(STATIC_LIBS_ALL)
-   LDFLAGS      += -static
-   STATIC_LIBS  := 1
-.ENDIF
-
-# Link to static libraries if requested
-.IF $(STATIC_LIBS)
-   LDFLAGS      += -L$(LIB_DEST_STATIC)
-.ELSE
-   LDFLAGS      += -L$(LIB_DEST_SHARED) -L$(LIB_DEST_STATIC)
-.ENDIF
-
-# Optionally enable some  dynamic libraries to be built
-.IF $(BUILD_DLL)
-.IF $(VERSIONMAJ)
-.ELSE
-   VERSIONMAJ	:= 5
-   VERSIONMIN	:= 0
-.ENDIF
-   VERSION      := $(VERSIONMAJ).$(VERSIONMIN)
-   LIB		    := gcc -shared
-   LIBFLAGS	    :=
-   L		    := .so
-   CFLAGS	    += -fPIC
-   SHOW_CFLAGS	+= -fPIC
-   ASFLAGS      += -D__PIC__
-   SHOW_ASFLAGS += -D__PIC__
-   LIB_DEST     := $(LIB_DEST_SHARED)
-.ELSE
-   LIB_DEST     := $(LIB_DEST_STATIC)
-.ENDIF
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= gcc_linux.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/gcc_win32.mk b/board/MAI/bios_emulator/scitech/makedefs/gcc_win32.mk
deleted file mode 100644
index 21ccf97849..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/gcc_win32.mk
+++ /dev/null
@@ -1,135 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Cygwin port of GNU C/C++ to Win32.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : GCC2_LIBBASE
-
-# Override some file suffix definitions
-   L            := .a     # Libraries
-   O            := .o     # Objects
-
-# Override the file prefix/suffix definitions for library naming.
-   LP           := lib		# LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           :=			# Library link suffix (extension of library on link command line)
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := gcc      # C-compiler and flags
-   CFLAGS       := -Wall -I. -Iinclude -I$(SCITECH:s,\,/)/include -I$(PRIVATE:s,\,/)/include
-   SHOW_CFLAGS	:= -c
-   CXX          := g++
-   AS			:= nasm
-   ASFLAGS      := -t -f coff -F null -d__FLAT__ -d__GNUC__ -dSTDCALL_USCORE -iINCLUDE -i$(SCITECH)\INCLUDE
-   SHOW_ASFLAGS	:= -f coff
-   LD           := gcc    	# Loader and flags
-   LDXX			:= g++
-.IF $(WIN32_GUI)
-   LDFLAGS      := -L. -mwindows -e _mainCRTStartup
-.ELSE
-   LDFLAGS      := -L.
-.ENDIF
-   RC           := windres
-   RCFLAGS		:= -O coff
-   LIB          := ar       # Librarian
-   LIBFLAGS     := rcs
-   YACC			:= bison -y
-   LEX			:= flex
-   SED			:= sed
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g
-   SHOW_CFLAGS  += -g
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -O6
-   SHOW_CFLAGS  += -O6
-.ELIF $(OPT)
-   CFLAGS       += -O2
-   SHOW_CFLAGS  += -O2
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -O1
-   SHOW_CFLAGS  += -O1
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   SHOW_CFLAGS  += -DBETA
-   ASFLAGS      += -dBETA
-   SHOW_ASFLAGS += -dBETA
-.ENDIF
-
-# DOS extender dependant flags
-   DX_CFLAGS    +=
-   DX_ASFLAGS   += -dGCC_WIN32
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-SHOW_CFLAGS	    += -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST     := $(LIB_BASE_DIR)\WIN32\$(GCC2_LIBBASE)
-   LDFLAGS      += -L$(LIB_DEST)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= gcc_win32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/hc32.mk b/board/MAI/bios_emulator/scitech/makedefs/hc32.mk
deleted file mode 100644
index f0b065a47c..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/hc32.mk
+++ /dev/null
@@ -1,113 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Metaware High C/C++ 3.21 32 bit version. Supports Phar Lap's
-#               TNT DOS Extender.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := hc386    # C-compiler and flags
-   CFLAGS       :=
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__FLAT__ /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := hc386
-   LDFLAGS       = $(CFLAGS)
-   LIB          := 386lib   # TNT 386|lib Librarian
-   LIBFLAGS     := -TC
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g       # Turn on debugging for C compiler
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -586 -O
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -586 -O1
-.ELSE
-   CFLAGS       += -O0
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -DFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-
-# DOS extender dependant flags
-   USE_TNT      := 1
-   USE_REALDOS	:= 1
-   DX_CFLAGS    += -DTNT
-   DX_ASFLAGS   += -DTNT
-   LDFLAGS      += -LH:\TNT\LIB
-
-# Place to look for PMODE library files
-
-PMLIB           := tnt\pm.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\DOS32\HC
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= hc32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj b/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj
deleted file mode 100644
index edd8809e29..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/makedefs/qnx4.mk b/board/MAI/bios_emulator/scitech/makedefs/qnx4.mk
deleted file mode 100644
index f583af36f6..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/qnx4.mk
+++ /dev/null
@@ -1,164 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               QNX version for Watcom C.
-#
-#############################################################################
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE SHW BETA CHECKED USE_QNX USE_QNX4
-.IMPORT .IGNORE : USE_PHOTON USE_X11 USE_BIOS SHOW_ARGS MAX_WARN WC_LIBBASE
-   TMPDIR       := $(TEMP)
-
-# Standard file suffix definitions
-#
-# NOTE: Qnx does not require any extension for executeable files, but you
-#       can use an extension if you wish. We use the .x extension for building
-#       executeable files so that we can use implicit rules to make the
-#       makefiles simpler and more portable between systems. When you install
-#       the files to a local bin directory, you will probably want to remove
-#       the .x extension.
-   L            := .a   	# Libraries
-   E            := .exe   	# Executables
-   O            := .o   	# Objects
-   A            := .asm   	# Assembler sources
-   S            := .s       # GNU assembler sources
-   P            := .cpp   	# C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           := 		    # Library link suffix (extension of library on link command line)
-
-# We use the Unix shell at all times
-   SHELL		:= /bin/sh
-   SHELLFLAGS   := -c
-
-# Definition of $(MAKE) macro for recursive makes.
-   MAKE = $(MAKECMD) $(MFLAGS)
-
-# Macro to install a library file
-   INSTALL      := cp
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
-
-# Define that we are compiling for QNX
-   USE_QNX    	:= 1
-
-# Default commands for compiling, assembling linking and archiving.
-   CC           := wcc386
-   CFLAGS       := -I. -Iinclude $(INCLUDE)
-   CXX          := wpp386
-   AS           := nasm
-   ASFLAGS      := -t -f obj -d__FLAT__ -dSTDCALL_MANGLE -iinclude -i$(SCITECH)/include
-   LD           := cc
-   LDFLAGS      := -L.
-   LIB          := ar
-   LIBFLAGS     := rc
-
-# Set the compiler warning level
-.IF $(MAX_WARN)
-   CFLAGS       += -w4
-.ELSE
-   CFLAGS       += -w1
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -d2
-   LDFLAGS      += -g2
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -onatx-5r-fp5
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -onaslmr-5r-fp5
-.ELIF $(NOOPT)
-   CFLAGS       += -od-5r
-.END
-
-# Compile flag for whether to build photon or non-photon lib
-.IF $(USE_PHOTON)
-   CFLAGS       += -D__PHOTON__
-.ENDIF
-
-# Compile flag for whether to build X11 or non-X11 lib
-.IF $(USE_X11)
-   CFLAGS       += -D__X11__
-.ENDIF
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__QNX__ -D__UNIX__
-   ASFLAGS      += -d__QNX__ -d__UNIX__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-  LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/debug
-  CFLAGS		+= -DCHECKED=1
-.ELSE
-  LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)/qnx4/$(WC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-   LDFLAGS      += -L$(LIB_DEST)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= qnx4.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/qnxnto.mk b/board/MAI/bios_emulator/scitech/makedefs/qnxnto.mk
deleted file mode 100644
index 5168ed269b..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/qnxnto.mk
+++ /dev/null
@@ -1,157 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               QNX Neutrino version for GNU C/C++
-#
-#############################################################################
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE SHW BETA CHECKED USE_QNX USE_QNXNTO
-.IMPORT .IGNORE : USE_EGCS USE_PHOTON USE_X11 USE_BIOS
-   TMPDIR       := $(TEMP)
-
-# Standard file suffix definitions
-#
-# NOTE: Qnx does not require any extension for executeable files, but you
-#       can use an extension if you wish. We use the .x extension for building
-#       executeable files so that we can use implicit rules to make the
-#       makefiles simpler and more portable between systems. When you install
-#       the files to a local bin directory, you will probably want to remove
-#       the .x extension.
-   L            := .a   	# Libraries
-   E            := .x   	# Executables
-   O            := .o   	# Objects
-   A            := .asm   	# Assembler sources
-   S            := .s       # GNU assembler sources
-   P            := .cpp   	# C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           := 		    # Library link suffix (extension of library on link command line)
-
-# We use the Unix shell at all times
-   SHELL		:= /bin/sh
-   SHELLFLAGS   := -c
-
-# Definition of $(MAKE) macro for recursive makes.
-   MAKE = $(MAKECMD) $(MFLAGS)
-
-# Macro to install a library file
-   INSTALL      := cp
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
-
-# Define that we are compiling for QNX
-   USE_QNX    	:= 1
-
-# Default commands for compiling, assembling linking and archiving.
-   CC           := qcc
-   CFLAGS       := -Vgcc_ntox86 -I. -Iinclude $(INCLUDE)
-   CPPFLAGS     := -Vgcc_ntox86 -I. -Iinclude $(INCLUDE)
-   CXX          := QCC
-   AS           := nasm
-   ASFLAGS      := -t -f elf -d__FLAT__ -d__GNUC__ -dSTDCALL_MANGLE -iinclude -i$(SCITECH)/include -d__NOU__
-   LD           := qcc
-   LDFLAGS      := -Vgcc_ntox86 -L. -lm
-   LIB          := ar
-   LIBFLAGS     := rc
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g2
-   LDFLAGS      += -g2
-.ELSE
-# NASM does not support debugging information yet
-   ASFLAGS      +=
-.ENDIF
-
-# Optionally turn on optimisations
-.IF $(OPT_MAX)
-   CFLAGS       += -Ot
-.ELIF $(OPT)
-   CFLAGS       += -O
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -Os
-.ENDIF
-
-# Compile flag for whether to build photon or non-photon lib
-.IF $(USE_PHOTON)
-   CFLAGS       += -D__PHOTON__
-.ENDIF
-
-# Compile flag for whether to build X11 or non-X11 lib
-.IF $(USE_X11)
-   CFLAGS       += -D__X11__
-.ENDIF
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.ENDIF
-
-# Target environment dependant flags
-   CFLAGS       += -D__QNX__ -D__UNIX__
-   ASFLAGS      += -d__QNX__ -d__UNIX__
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-  LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/debug
-  CFLAGS		+= -DCHECKED=1
-.ELSE
-  LIB_BASE_DIR	:= $(SCITECH_LIB)/lib/release
-.ENDIF
-
-# Define where to install library files
-   LIB_DEST	:= $(LIB_BASE_DIR)/qnxnto
-   LDFLAGS      += -L$(LIB_DEST)
-
-# Place to look for PMODE library files
-
-PMLIB           := -lpm
-
-# Define which file contains our rules
-
-   RULES_MAK	:= qnxnto.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/bc16.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/bc16.mk
deleted file mode 100644
index 67ae9101b1..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/bc16.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $<
-%$O: %$P ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $<
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-%$D:      ; $(LD) $(mktmp $(LDFLAGS) -C -Twd c0dl.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(EXELIBS)\n$*.def)
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIBR) $(LIBFLAGS) $@ @$(mktmp +$(&:t" &\n+")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -C -Twe $(WIN_VERSION) c0wl.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(EXELIBS)\n$*.def)
-.ELSE
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Tde c0l.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(PMLIB) $(DEF_LIBS) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/bc3.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/bc3.mk
deleted file mode 100644
index d4d071c0d8..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/bc3.mk
+++ /dev/null
@@ -1,43 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS)) -c $<
-%$O: %$P ; $(CC) @$(mktmp $(CFLAGS)) -c $<
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS)) $(<:s,/,\)
-
-# Implicit rule for building a library file using response file
-%$L: ;
-    @$(RM) $@
-    $(LIBR) $(LIBFLAGS) $@ @$(mktmp +$(&:t" &\n+")\n)
-
-# Implicit rule for building an executable file using response file
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Tde c0l.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(EXELIBS))
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/bc32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/bc32.mk
deleted file mode 100644
index e3ce25bded..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/bc32.mk
+++ /dev/null
@@ -1,151 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-.IF $(USE_VXD)
-
-# Implicit rule generation to build VxD's
-
-%$O: %.c ;
-	$(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-	@$(VTOOLSD)\bin\segalias.exe -p $(VTOOLSD)\include\default.seg $@
-
-%$O: %$P ;
-	$(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-	@$(VTOOLSD)\bin\segalias.exe -p $(VTOOLSD)\include\default.seg $@
-
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-
-%$L: ; $(LIB) $(LIBFLAGS) $@ @$(mktmp -+$(?:t" &\n-+")\n)
-
-%.dll: ;
-	@$(CP) $(mktmp EXPORTS\n_The_DDB @1) $*.def
-	tlink32.exe @$(mktmp $(LDFLAGS) -Tpd $(VTOOLSD:s/\/\\)\lib\icrtbc4.obj+\n$(&:s/\/\\)\n$*.dll\n$*.map\n$(DEF_LIBS:s/\/\\) $(PMLIB:s/\/\\) $(EXELIBS:s/\/\\)\n$*.def)
-	@$(RM) -S $(mktmp $*.def)
-
-%.vxd: %.dll ;
-	@$(CP) $(mktmp DYNAMIC\nATTRIB ICODE INIT\nATTRIB LCODE LOCKED\nATTRIB PCODE PAGEABLE\nATTRIB SCODE STATIC\nATTRIB DBOCODE DEBUG\nMERGE ICODE INITDAT0 INITDATA) $*.pel
-	@$(VTOOLSD)\bin\vxdver.exe $*.vrc $*.res
-	@$(VTOOLSD)\bin\pele.exe -d -s $*.smf -c $*.pel -o $@ -k 400 $*.dll
-	@$(VTOOLSD)\bin\sethdr.exe -n $* -x $@ -r $*.res
-.IF $(DBG)
-	$(NMSYM) /TRANS:source,package /SOURCE:$(VXDSOURCE) $*.smf
-.ENDIF
-	@$(RM) -S $(mktmp $*.pel)
-
-.ELSE
-
-# Implicit generation rules for making object files, libraries and exe's
-
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-%$O: %$P ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-.IF $(IMPORT_DLL)
-.ELSE
-.IF $(NO_RUNTIME)
-%$D: ; $(LD) $(mktmp $(LDFLAGS) -Tpd -aa $(&:s/\/\\)\n$@\n$*.map\n$(EXELIBS)\n$*.def)
-.ELSE
-%$D: ;
-	makedef $(@:b)
-	$(LD) $(mktmp $(LDFLAGS) -Tpd -aa c0d32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.IF $(DBG)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-	tdstrp32 $@
-.ENDIF
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $(LIBFLAGS) $@ @$(mktmp +$(&:t" &\n+")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-
-.IF $(USE_WIN32)
-.IF $(WIN32_GUI)
-%$E: ;
-	$(LD) $(mktmp $(LDFLAGS) -Tpe -aa $(WIN_VERSION) c0w32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.IF $(DBG)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-	tdstrp32 $@
-.ENDIF
-.ENDIF
-.ELSE
-%$E: ;
-	$(LD) $(mktmp $(LDFLAGS) -Tpe -ap c0x32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-	tdstrp32 $@
-.ENDIF
-.ENDIF
-.ELIF $(USE_TNT)
-%$E: ;
-	@$(CP) $(mktmp stub 'gotnt.exe') $*.def
-	@$(LD) $(mktmp $(LDFLAGS) -Tpe -ap c0x32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.IF $(DOSSTYLE)
-	@markphar $@
-.ENDIF
-	@$(RM) -S $(mktmp $*.def)
-.ELIF $(USE_SMX32)
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Tpe -ap c0x32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.ELSE
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Tpe -ap c0x32.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS) $(PMLIB:s/\/\\) $(EXELIBS)\n$*.def)
-.END
-
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/bcos2.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/bcos2.mk
deleted file mode 100644
index f473fecf49..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/bcos2.mk
+++ /dev/null
@@ -1,70 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-%$O: %$P ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) -c $(<:s,/,\)
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-%$D: ;
-	makedef $(@:b)
-	$(LD) $(mktmp $(LDFLAGS) -Tod -aa c02d.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(EXELIBS)\n$*.def)
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $(LIBFLAGS) $@ @$(mktmp +$(&:t" &\n+")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-
-.IF $(USE_OS2GUI)
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Toe -aa c02.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(EXELIBS)\n$*.def)
-.ELSE
-%$E: ; $(LD) $(mktmp $(LDFLAGS) -Toe -ap c02.obj+\n$(&:s/\/\\)\n$@\n$*.map\n$(DEF_LIBS:s/\/\\) $(EXELIBS)\n$*.def)
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/cl16.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/cl16.mk
deleted file mode 100644
index 6489a3ee43..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/cl16.mk
+++ /dev/null
@@ -1,67 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) /nologo $(CFLAGS) /c $<
-%$O: %$P ; $(CC) /nologo $(CFLAGS) /c $<
-%$O: %$A ; $(AS) $(ASFLAGS) $< $* NUL NUL
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-#%$D: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS:s/\/\\) -e$@\n$(&:t"\n":s/\/\\)\n$(EXELIBS))
-#%$D: ; $(LD) $(LDFLAGS) /Fe$@ $& $(EXELIBS)
-%$D: ;  link @default.rsp
-
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L:      ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L:      ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ; $(LIB) /nologo $(LIBFLAGS) $@ @$(mktmp -+$(?:t" &\n-+") &\n,,\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-#%$E: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-.ELSE
-%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/cl386.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/cl386.mk
deleted file mode 100644
index f50b2749e4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/cl386.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) -nologo $(CFLAGS) -c $<
-%$O: %$P ; $(CC) -nologo $(CFLAGS) -c $<
-%$O: %$A ; $(AS) $(ASFLAGS) $< $* NUL NUL
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-#%$D: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS:s/\/\\) -e$@\n$(&:t"\n":s/\/\\)\n$(EXELIBS))
-#%$D: ; $(LD) $(LDFLAGS) /Fe$@ $& $(EXELIBS)
-%$D: ;  link386 @default.rsp
-
-# Implicit rule for building a device driver using a response file
-%.SYS: ;  link386 @default.rsp
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L:      ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L:      ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ; $(LIB) /nologo $(LIBFLAGS) $@ @$(mktmp -+$(?:t" &\n-+") &\n,,\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-#%$E: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-.ELSE
-%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/dj32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/dj32.mk
deleted file mode 100644
index 9f917bbdd9..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/dj32.mk
+++ /dev/null
@@ -1,47 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS:s/\/\\) -c) $(<:s,/,\)
-%$O: %$P ; $(CC) @$(mktmp $(CFLAGS:s/\/\\) -c) $(<:s,/,\)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-
-# Implicit rule for building a library file using response file
-%$L:      ; $(LIB) $(LIBFLAGS) $@ @$(mktmp $(&:s/\/\\)\n)
-
-# Implicit rule for building an executable file using response file
-%$E:      ; $(LD) $(LDFLAGS) $@ @$(mktmp $(&:s/\/\\) $(EXELIBS) $(PMLIB) -lstdcxx -lm)
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/emx.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/emx.mk
deleted file mode 100644
index 26d223ad41..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/emx.mk
+++ /dev/null
@@ -1,91 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#               OS/2 version for EMX/GNU C/C++.
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ;
-.IF $(SHOW_ARGS)
-	$(CC) -c $(CFLAGS) $(<:s,\,/)
-.ELSE
-	@echo $(CC) -c $(<:s,\,/)
-	@$(CC) -c $(CFLAGS) $(<:s,\,/)
-.ENDIF
-
-%$O: %$P ;
-.IF $(SHOW_ARGS)
-	$(CXX) -c $(CFLAGS) $(<:s,\,/)
-.ELSE
-	@echo $(CXX) -c $(<:s,\,/)
-	@$(CXX) -c $(CFLAGS) $(<:s,\,/)
-.ENDIF
-
-%$O: %$A ;
-.IF $(USE_NASM)
-.IF $(SHOW_ARGS)
-	$(AS) -o $@ $(ASFLAGS) $(<:s,\,/)
-.ELSE
-	@echo $(AS) $(<:s,\,/)
-	@$(AS) @$(mktmp -o $@ $(ASFLAGS)) $(<:s,\,/)
-.ENDIF
-.ELSE
-.IF $(SHOW_ARGS)
-
-    $(AS)  @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-	@echo $(AS) $(<:s,/,\)
-    $(AS)  @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-.ENDIF
-
-# Implicit rule for building a library file using response file
-%$L:     ;
-.IF $(SHOW_ARGS)
-	$(LIB) $(LIBFLAGS) $@ $(&:s,\,/)
-.ELSE
-	@echo $(LIB) $@
-	@$(LIB) $(LIBFLAGS) $@ @$(mktmp $(?:t"\n"))
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-%$E:     ;
-.IF $(SHOW_ARGS)
-	$(LD) $(LDFLAGS) -o $@ $(&:s,\,/) $(EXELIBS) $(PMLIB) -lgpp -lstdcpp
-.ELSE
-	@echo $(LD) $@
-	@$(LD) $(LDFLAGS) -o $@ $(&:s,\,/) $(EXELIBS) $(PMLIB) -lgpp -lstdcpp
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_beos.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_beos.mk
deleted file mode 100644
index 681b698fc2..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_beos.mk
+++ /dev/null
@@ -1,47 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CXX) $(CFLAGS) -c $<
-%$O: %$A ; $(AS) $(ASFLAGS) $<
-
-# Implicit rule for building a library file
-%$L:     ; $(LIB) $(LIBFLAGS) $@ $&
-
-# Implicit rule for building an executable file
-%$E:     ; $(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB)
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_freebsd.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_freebsd.mk
deleted file mode 100644
index 9b4d236216..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_freebsd.mk
+++ /dev/null
@@ -1,47 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CXX) $(CFLAGS) -c $<
-%$O: %$A ; $(AS) -o $@ $(ASFLAGS) $<
-
-# Implicit rule for building a library file
-%$L:     ; $(LIB) $(LIBFLAGS) $@ $&
-
-# Implicit rule for building an executable file
-%$E:     ; $(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) -lm
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_linux.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_linux.mk
deleted file mode 100644
index 5f91fe53f4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_linux.mk
+++ /dev/null
@@ -1,93 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-.IF $(USE_CXX_LINKER)
-LD	:= $(LDXX)
-.ENDIF
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ;
-.IF $(SHOW_ARGS)
-    $(CC) -c $(CFLAGS) $<
-.ELSE
-    @$(ECHO) $(CC) $(SHOW_CFLAGS) $<
-    @$(CC) -c $(CFLAGS) $<
-.ENDIF
-
-%$O: %$P ;
-.IF $(SHOW_ARGS)
-    $(CXX) -c $(CFLAGS) $<
-.ELSE
-    @$(ECHO) $(CXX) $(SHOW_CFLAGS) $<
-    @$(CXX) -c $(CFLAGS) $<
-.ENDIF
-
-%$O: %$A ;
-.IF $(SHOW_ARGS)
-    $(AS) -o $@ $(ASFLAGS) $<
-.ELSE
-    @$(ECHO) $(AS) $(SHOW_ASFLAGS) $<
-    @$(AS) @$(mktmp -o $@ $(ASFLAGS)) $<
-.ENDIF
-
-# Implicit rule for building a library file
-.IF $(BUILD_DLL)
-%$L:     ;
-.IF $(SHOW_ARGS)
-    $(LIB) $(LIBFLAGS) -Wl,-soname,$@.$(VERSIONMAJ) -o $@ $& $(LIBS)
-.ELSE
-    @$(ECHO) $(LIB) $@
-    @$(LIB) $(LIBFLAGS) -Wl,-soname,$@.$(VERSIONMAJ) -o $@ $& $(LIBS)
-.ENDIF
-.ELSE
-%$L:     ;
-.IF $(SHOW_ARGS)
-    $(LIB) $(LIBFLAGS) $@ $&
-.ELSE
-    @$(ECHO) $(LIB) $@
-    @$(LIB) $(LIBFLAGS) $@ $&
-.ENDIF
-.ENDIF
-
-# Implicit rule for building an executable file
-%$E:     ;
-.IF $(SHOW_ARGS)
-    $(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) -lm
-.ELSE
-    @$(ECHO) ld $@
-    @$(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) -lm
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_win32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_win32.mk
deleted file mode 100644
index 485d166ac4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/gcc_win32.mk
+++ /dev/null
@@ -1,90 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-.IF $(USE_CXX_LINKER)
-LD	:= $(LDXX)
-.ENDIF
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ;
-.IF $(SHOW_ARGS)
-    $(CC) -c $(CFLAGS:s/\/\\) $(<:s,/,\)
-.ELSE
-    @$(ECHO) $(CC) $(SHOW_CFLAGS:s/\/\\) $(<:s,/,\)
-    @$(CC) -c $(CFLAGS:s/\/\\) $(<:s,/,\)
-.ENDIF
-
-%$O: %$P ;
-.IF $(SHOW_ARGS)
-    $(CXX) -c $(CFLAGS:s/\/\\) $(<:s,/,\)
-.ELSE
-    @$(ECHO) $(CXX) $(SHOW_CFLAGS:s/\/\\) $(<:s,/,\)
-    @$(CXX) -c $(CFLAGS:s/\/\\) $(<:s,/,\)
-.ENDIF
-
-%$O: %$A ;
-.IF $(SHOW_ARGS)
-    $(AS) -o $(ASFLAGS:s/\/\\) $(<:s,/,\)
-.ELSE
-    @$(ECHO) $(AS) $(SHOW_ASFLAGS:s/\/\\) $(<:s,/,\)
-    @$(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $< $(RCFLAGS) -o $@
-
-# Implicit rule for building a DLL
-# TODO!
-#%$D: ; +rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(PMLIB) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-
-# Implicit rule for building a library file
-%$L:     ;
-.IF $(SHOW_ARGS)
-    $(LIB) $(LIBFLAGS) $@ $&
-.ELSE
-    @$(ECHO) $(LIB) $@
-    @$(LIB) $(LIBFLAGS) $@ @$(mktmp $(&:s/\/\\)\n)
-.ENDIF
-
-# Implicit rule for building an executable file
-%$E:     ;
-.IF $(SHOW_ARGS)
-    $(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) -lm
-.ELSE
-    @$(ECHO) ld $@
-    @$(LD) $(LDFLAGS) -o $@ @$(mktmp $(&:s/\/\\) $(EXELIBS) $(PMLIB) -lm)
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/hc32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/hc32.mk
deleted file mode 100644
index 011e9ab3a4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/hc32.mk
+++ /dev/null
@@ -1,51 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CC) $(CFLAGS) -c $<
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building a library file using response file
-%$L:      ; $(LIB) $(LIBFLAGS) $@ @$(mktmp,$*.rsp -R $?)
-
-# Implicit rule for building an executable file using response file
-%$E:      ; $(LD) $(LDFLAGS) -o $@ @$(mktmp $(&:s/\/\\) $(PMLIB) $(EXELIBS) -ldosx32.lib)
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/qnx4.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/qnx4.mk
deleted file mode 100644
index 55dc035500..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/qnx4.mk
+++ /dev/null
@@ -1,94 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Whether to link in real VBIOS library, or just the stub library
-
-.IF $(USE_BIOS)
-VBIOSLIB := -lvbios.lib
-.ELSE
-VBIOSLIB := -lvbstubs.lib
-.END
-
-# Require special privledges for Nucleus programs (requires root access)
-
-.IF $(USE_NUCLEUS)
-LDFLAGS		+= -T1
-.ENDIF
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ;
-.IF $(SHOW_ARGS)
-    $(CC) $(CFLAGS) $<
-.ELSE
-    @echo $(CC) -c $<
-	+@$(CC) $(CFLAGS) $< > /dev/null
-.ENDIF
-
-%$O: %$P ;
-.IF $(SHOW_ARGS)
-	$(CXX) $(CFLAGS) $<
-.ELSE
-	@echo $(CXX) -c $<
-	+@$(CXX) $(CFLAGS) $< > /dev/null
-.ENDIF
-
-%$O: %$A ;
-.IF $(SHOW_ARGS)
-    $(AS) -o $@ $(ASFLAGS) $<
-.ELSE
-    @echo $(AS) $<
-	@$(AS) -o $@ $(ASFLAGS) $<
-.ENDIF
-
-# Implicit rule for building a library file
-%$L:     ;
-.IF $(SHOW_ARGS)
-    $(LIB) $(LIBFLAGS) -q $@ $&
-.ELSE
-    @echo $(LIB) $@
-	+@$(LIB) $(LIBFLAGS) -q $@ $& > /dev/null
-.ENDIF
-
-
-# Implicit rule for building an executable file
-%$E:     ;
-.IF $(SHOW_ARGS)
-	$(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) $(VBIOSLIB)
-.ELSE
-	@echo wlink $@
-	+@$(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) $(VBIOSLIB) > /dev/null
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/qnxnto.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/qnxnto.mk
deleted file mode 100644
index c43ad1f642..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/qnxnto.mk
+++ /dev/null
@@ -1,55 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Whether to link in real VBIOS library, or just the stub library
-
-.IF $(USE_BIOS)
-VBIOSLIB := -lvbios
-.ELSE
-VBIOSLIB := -lvbstubs
-.END
-
-# Implicit generation rules for making object files from source files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CXX) $(CPPFLAGS) -c $<
-%$O: %$A ; $(AS) -o $@ $(ASFLAGS) $<
-
-# Implicit rule for building a library file
-%$L:     ; $(LIB) $(LIBFLAGS) $@ $&
-
-# Implicit rule for building an executable file
-%$E:     ; $(LD) $(LDFLAGS) -o $@ $& $(EXELIBS) $(PMLIB) $(VBIOSLIB)
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/sc16.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/sc16.mk
deleted file mode 100644
index b33bcd86a0..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/sc16.mk
+++ /dev/null
@@ -1,63 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CC) $(CFLAGS) -c $<
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS)) $(<:s,/,\)
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-%$D: ; $(LD) $(LDFLAGS) @$(mktmp $(&:s/\/\\) $(EXELIBS))
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ; $(LIB) $(LIBFLAGS) $@ @$(mktmp -+$(?:t" &\n-+")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-%$E: ; $(LD) $(LDFLAGS) @$(mktmp $(&:s/\/\\) $(EXELIBS))
-.ELSE
-%$E: ; $(LD) $(LDFLAGS) @$(mktmp $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/sc32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/sc32.mk
deleted file mode 100644
index 2231906d66..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/sc32.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) $(CFLAGS) -c $<
-%$O: %$P ; $(CC) $(CFLAGS) -c $<
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-%$D: ; $(LD) $(LDFLAGS) @$(mktmp,$*.lnk $(&:s/\/\\) $(EXELIBS) kernel32.lib user32.lib gdi32.lib winmm.lib comdlg32.lib advapi32.lib)
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ; $(LIB) $(LIBFLAGS) $@ @$(mktmp -+$(?:t" &\n-+")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_TNT)
-%$E: ; $(LD) $(LDFLAGS) @$(mktmp,$*.lnk $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ELIF $(USE_WIN32)
-%$E: ; $(LD) $(LDFLAGS) @$(mktmp,$*.lnk $(&:s/\/\\) $(EXELIBS) kernel32.lib user32.lib gdi32.lib winmm.lib comdlg32.lib advapi32.lib)
-.ELSE
-%$E: ; $(LD) $(LDFLAGS) @$(mktmp,$*.lnk $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/va32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/va32.mk
deleted file mode 100644
index 1a20319cba..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/va32.mk
+++ /dev/null
@@ -1,82 +0,0 @@
-#############################################################################
-#
-#                                       SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#                               build targets. We include them here at the end of the
-#                               makefile so the generic project makefiles can override
-#                               certain things with macros (such as linking C++ programs
-#                               differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC)  -c @$(mktmp $(CFLAGS:s/\/\\))  $(<:s,/,\)
-%$O: %$P ; $(CPP) -c @$(mktmp $(CFLAGS:s/\/\\))  $(<:s,/,\)
-.IF $(USE_NASM)
-%$O: %$A ; $(AS)  @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS)  @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building help files
-%.hlp: %.ipf; $(IPFC) $(IPFCFLAGS) $<
-
-# Implicit rule for building a DLL using a response file
-.IF $(USE_OS2GUI)
-%$D: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.ELSE
-%$D: ; $(LD) /nofree /nol @$(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.ENDIF
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ; $(LIB) $(LIBFLAGS) @$(mktmp $@-+$(?:t"&\n-+":s/\/\\);)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_OS2GUI)
-%$E: ;
-	rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.IF $(LXLITE)
-	lxlite $@
-.ENDIF
-.ELSE
-%$E: ;
-	rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n\n)
-.IF $(LXLITE)
-	lxlite $@
-.ENDIF
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/va365.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/va365.mk
deleted file mode 100644
index 2b4180146a..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/va365.mk
+++ /dev/null
@@ -1,79 +0,0 @@
-#############################################################################
-#
-#                                       SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#                               build targets. We include them here at the end of the
-#                               makefile so the generic project makefiles can override
-#                               certain things with macros (such as linking C++ programs
-#                               differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) -c @$(mktmp $(CFLAGS:s/\/\\))  $(<:s,/,\)
-%$O: %$P ; $(CPP) -c @$(mktmp $(CFLAGS:s/\/\\))  $(<:s,/,\)
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-.IF $(USE_OS2GUI)
-%$D: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.ELSE
-%$D: ; $(LD) /nofree /nol @$(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.ENDIF
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) /out:$@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ; $(ILIB) $(ILIBFLAGS) /out:$@ $?
-.ELSE
-%$L: ; $(LIB) $(LIBFLAGS) /nowarn:86 /out:$@ @$(mktmp $(?:t"\n":s/\/\\))
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_OS2GUI)
-%$E: ;
-	rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n$*.def\n)
-.IF $(LXLITE)
-	lxlite $@
-.ENDIF
-.ELSE
-%$E: ;
-	rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) $(&:t"+\n":s/\/\\)\n$@\n$*.map\n$(EXELIBS) $(PMLIB)\n\n)
-.IF $(LXLITE)
-	lxlite $@
-.ENDIF
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/vc16.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/vc16.mk
deleted file mode 100644
index 6ffc270c01..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/vc16.mk
+++ /dev/null
@@ -1,70 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) /nologo $(CFLAGS) /c $<
-%$O: %$P ; $(CC) /nologo $(CFLAGS) /c $<
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS)) $(<:s,/,\)
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-%$D: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) -e$@\n$(&:t"\n":s/\/\\)\n$(EXELIBS))
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ $?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $@ /nologo $(LIBFLAGS) @$(mktmp +$(&:t" &\n+") &\n,\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-%$E: ; rclink $(LD) $(RC) $@ $(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-#%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(EXELIBS))
-.ELSE
-%$E: ; $(LD) @$(mktmp $(LDFLAGS) /Fe$@ $(&:s/\/\\) $(PMLIB) $(EXELIBS))
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/vc32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/vc32.mk
deleted file mode 100644
index 97f1a0c162..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/vc32.mk
+++ /dev/null
@@ -1,122 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Turn on pre-compiled headers as neccessary
-.IF $(PRECOMP_HDR)
-   CFLAGS       += -YX"$(PRECOMP_HDR)"
-.ENDIF
-
-# Turn on runtime type information as necessary
-.IF $(USE_RTTI)
-	CFLAGS		+= /GR
-.ENDIF
-
-# Turn on C++ exception handling as necessary
-.IF $(USE_CPPEXCEPT)
-	CFLAGS		+= /GX
-.ENDIF
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) /nologo @$(mktmp $(CFLAGS:s/\/\\)) /c $(<:s,/,\)
-%$O: %$P ; $(CC) /nologo @$(mktmp $(CFLAGS:s/\/\\)) /c $(<:s,/,\)
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rules for building NT device drivers
-
-%.sys: ;
-	$(LD) /nologo @$(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(PMLIB) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-.IF $(DBG)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-.ENDIF
-.ENDIF
-
-# Implicit rule for building a DLL using a response file
-.IF $(IMPORT_DLL)
-.ELSE
-.IF $(NO_RUNTIME)
-%$D: ; $(LD) /nologo @$(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-.ELSE
-%$D: ;
-	makedef -v $*
-	$(LD) /nologo @$(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(PMLIB) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-.IF $(DBG)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-.ENDIF
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Implicit rule for building a library file using response file. Note that
-# we use a special .VCD file that contains the EXPORT definitions for the
-# Microsoft compiler, since the LIB utility automatically adds leading
-# underscores to exported functions.
-.IF $(IMPORT_DLL)
-%$L: ;
-	makedef -v $(?:b)
-    @$(RM) $@
-	$(ILIB) $(ILIBFLAGS) /DEF:$(?:b).def /OUT:$@
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $(LIBFLAGS) /out:$@ @$(mktmp $(&:t"\n")\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN32)
-%$E: ;
-	$(LD) /nologo @$(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(PMLIB) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-.IF $(DBG)
-.IF $(USE_SOFTICE)
-	$(NMSYM) $(NMSYMFLAGS);$(SI_SOURCE) $@
-.ENDIF
-.ENDIF
-.ELSE
-%$E: ;
-	@$(LD) /nologo @$(mktmp $(LDFLAGS) /Fe$@ $(&:t"\n"s/\/\\) $(PMLIB) $(EXELIBS) $(DEF_LIBS) $(LDENDFLAGS))
-.IF $(DOSSTYLE)
-	@markphar $@
-.ENDIF
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/wc16.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/wc16.mk
deleted file mode 100644
index d1ca9176ef..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/wc16.mk
+++ /dev/null
@@ -1,79 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Implicit generation rules for making object files
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS)) $<
-%$O: %$P ; $(CPP) @$(mktmp $(CFLAGS)) $<
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS)) $(<:s,/,\)
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ +$?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-    @$(RM) $@
-    $(ILIB) $(ILIBFLAGS) $@ +$?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $(LIBFLAGS) $@ @$(mktmp,$*.rsp +$(&:t"\n+":s/\/\\)\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_WIN16)
-.IF $(BUILD_DLL)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS windows_dll\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-	@$(RM) -S $(mktmp $*.lnk)
-.ELSE
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS windows\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-	@$(RM) -S $(mktmp $*.lnk)
-.ENDIF
-.ELSE
-%$E: ;
-	@trimlib $(mktmp OP quiet\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB) $(EXELIBS:t",")) $*.lnk
-	$(LD) $(LDFLAGS) @$*.lnk
-	@$(RM) -S $(mktmp $*.lnk)
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/rules/wc32.mk b/board/MAI/bios_emulator/scitech/makedefs/rules/wc32.mk
deleted file mode 100644
index 39b8819b2b..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/rules/wc32.mk
+++ /dev/null
@@ -1,264 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Rules makefile definitions, which define the rules used to
-#				build targets. We include them here at the end of the
-#				makefile so the generic project makefiles can override
-#				certain things with macros (such as linking C++ programs
-#				differently).
-#
-#############################################################################
-
-# Take out PMLIB if we don't need to link with it
-
-.IF $(NO_PMLIB)
-PMLIB :=
-.ENDIF
-
-# Use a larger stack during linking if requested, or use a default stack
-# of 200k. The usual default stack provided by Watcom C++ is *way* to small
-# for real 32 bit code development. We also need a *huge* stack for OpenGL
-# software rendering also!
-.IF $(USE_QNX4)
-    # Not necessary for QNX code.
-.ELSE
-.IF $(STKSIZE)
-    LDFLAGS		+= OP STACK=$(STKSIZE)
-.ELSE
-	LDFLAGS		+= OP STACK=204800
-.ENDIF
-.ENDIF
-
-# Turn on runtime type information as necessary
-.IF $(USE_RTTI)
-	CPFLAGS		+= -xr
-.ENDIF
-
-# Optionally turn on pre-compiled headers
-.IF $(PRECOMP_HDR)
-	CFLAGS		+= -fhq
-.ENDIF
-
-.IF $(USE_QNX)
-# Whether to link in real VBIOS library, or just the stub library
-.IF $(USE_BIOS)
-VBIOSLIB := vbios.lib,
-.ELSE
-VBIOSLIB := vbstubs.lib,
-.END
-# Require special privledges for Nucleus programs (requires root access)
-.IF $(USE_NUCLEUS)
-LDFLAGS		+= OP PRIV=1
-.ENDIF
-.ENDIF
-
-# Implicit generation rules for making object files
-.IF $(WC_LIBBASE) == WC10A
-%$O: %.c ; $(CC) $(CFLAGS) $(<:s,/,\)
-%$O: %$P ; $(CPP) $(CFLAGS) $(<:s,/,\)
-.ELSE
-%$O: %.c ; $(CC) @$(mktmp $(CFLAGS:s/\/\\)) $(<:s,/,\)
-%$O: %$P ; $(CPP) @$(mktmp $(CPFLAGS:s/\/\\) $(CFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-.IF $(USE_NASM)
-%$O: %$A ; $(AS) @$(mktmp -o $@ $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-%$O: %$A ; $(AS) @$(mktmp $(ASFLAGS:s/\/\\)) $(<:s,/,\)
-.ENDIF
-
-# Implit rule to compile .S assembler files. The first version
-# uses GAS directly and the second uses a pre-processor to
-# produce NASM code.
-
-.IF $(USE_GAS)
-.IF $(WC_LIBBASE) == WC11
-%$O: %$S ; $(GAS) -c @$(mktmp $(GAS_FLAGS:s/\/\\)) $(<:s,/,\)
-.ELSE
-# Black magic to build asm sources with Watcom 10.6 (requires sed)
-%$O: %$S ;
-	$(GAS) -c @$(mktmp $(GAS_FLAGS:s/\/\\)) $(<:s,/,\)
-	wdisasm \\ -a $(*:s,/,\).o > $(*:s,/,\).lst
-	sed -e "s/\.text/_TEXT/; s/\.data/_DATA/; s/\.bss/_BSS/; s/\.386/\.586/; s/lar *ecx,cx/lar ecx,ecx/" $(*:s,/,\).lst > $(*:s,/,\).asm
-	wasm \\ $(WFLAGS) -zq -fr=nul -fp3 -fo=$@ $(*:s,/,\).asm
-	$(RM) -S $(mktmp $(*:s,/,\).o)
-	$(RM) -S $(mktmp $(*:s,/,\).lst)
-	$(RM) -S $(mktmp $(*:s,/,\).asm)
-.ENDIF
-.ELSE
-%$O: %$S ;
-	@gcpp -DNASM_ASSEMBLER -D__WATCOMC__ -EP $(<:s,/,\) > $(*:s,/,\).asm
-	nasm @$(mktmp -f obj -o $@) $(*:s,/,\).asm
-	@$(RM) -S $(mktmp $(*:s,/,\).asm)
-.ENDIF
-
-# Special target to build dllstart.asm using Borland TASM
-dllstart.obj: dllstart.asm
-	$(DLL_TASM) @$(mktmp /t /mx /m /D__FLAT__ /i$(SCITECH)\INCLUDE /q) $(PRIVATE)\src\common\dllstart.asm
-
-# Implicit rule for building resource files
-%$R: %.rc ; $(RC) $(RCFLAGS) -r $<
-
-# Implicit rule for building a DLL using a response file
-.IF $(IMPORT_DLL)
-.ELSE
-.IF $(USE_OS232)
-%$D: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS os2v2 dll\nN $@\nF $(&:t",\n":s/\/\\)\nLIBR $(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELIF $(USE_WIN32)
-%$D: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS nt_dll\nN $@\nF $(&:t",\n":s/\/\\)\nLIBR $(PMLIB)$(DEFLIBS)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELSE
-%$D: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS win386\nN $*.rex\nF $(&:t",\n":s/\/\\)\nLIBR $(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-	wbind $* -d -q -n
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Implicit rule for building a library file using response file
-.IF $(BUILD_DLL)
-%$L: ;
-	@$(RM) $@
-	$(ILIB) $(ILIBFLAGS) $@ +$?
-.ELIF $(IMPORT_DLL)
-%$L: ;
-	@$(RM) $@
-	$(ILIB) $(ILIBFLAGS) $@ +$?
-.ELSE
-%$L: ;
-    @$(RM) $@
-    $(LIB) $(LIBFLAGS) $@ @$(mktmp,$*.rsp +$(&:t"\n+":s/\/\\)\n)
-.ENDIF
-
-# Implicit rule for building an executable file using response file
-.IF $(USE_X32)
-%$E: ;
-	@trimlib $(mktmp OP quiet\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(EXELIBS:t",")) $*.lnk
-	$(LD) $(LDFLAGS) @$*.lnk
-	x32fix $@
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELIF $(USE_OS232)
-.IF $(USE_OS2GUI)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS os2v2_pm\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.IF $(LXLITE)
- 	lxlite $@
-.ENDIF
-.ELSE
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS os2v2\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.IF $(LXLITE)
- 	lxlite $@
-.ENDIF
-.ENDIF
-.ELIF $(USE_SNAP)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS nt\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(DEFLIBS)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELIF $(USE_WIN32)
-.IF $(WIN32_GUI)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS win95\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(DEFLIBS)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELSE
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS nt\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(DEFLIBS)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) $(RC) $@ $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ENDIF
-.ELIF $(USE_WIN386)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet SYS win386\nN $*.rex\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(EXELIBS:t",")) $*.lnk
-	rclink $(LD) wbind $*.rex $*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELIF $(USE_TNT)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet\nN $@\nF $(&:t",":s/\/\\)\nLIBR dosx32.lib,tntapi.lib,$(PMLIB)$(EXELIBS:t",")) $*.lnk
-	$(LD) @$*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.IF $(DOSSTYLE)
-	@markphar $@
-.ENDIF
-.ELIF $(USE_QNX4)
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(VBIOSLIB)$(EXELIBS:t",")) $*.lnk
-	@+if exist $*.exe attrib -s $*.exe > NUL
-	$(LD) @$*.lnk
-	@attrib +s $*.exe
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ELSE
-%$E: ;
-	@trimlib $(mktmp $(LDFLAGS) OP quiet\nN $@\nF $(&:t",":s/\/\\)\nLIBR $(PMLIB)$(EXELIBS:t",")) $*.lnk
-	$(LD) @$*.lnk
-.IF $(LEAVE_LINKFILE)
-.ELSE
-	@$(RM) -S $(mktmp *.lnk)
-.ENDIF
-.ENDIF
diff --git a/board/MAI/bios_emulator/scitech/makedefs/sc16.mk b/board/MAI/bios_emulator/scitech/makedefs/sc16.mk
deleted file mode 100644
index 099ad45527..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/sc16.mk
+++ /dev/null
@@ -1,128 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Symantec C++ 6.x/7.x 16 bit version. Supports 16 bit DOS
-#               and 16 bit Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : SC_LIBBASE
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := sc       # C-compiler and flags
-   CFLAGS       := -ml -Jm
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__COMM__ /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := sc       # Loader and flags
-   LDFLAGS       = $(CFLAGS)
-   RC           := rcc      # WIndows resource compiler
-   RCFLAGS      :=          # Mark as Win32 compatible resources
-   LIB          := lib      # Librarian
-   LIBFLAGS     := /N /B
-   ILIB         := implib   # Import librarian
-   ILIBFLAGS    :=
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g       # Turn on debugging for C compiler
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -5 -o+all
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -5 -o+space
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -ff -DFPU387
-   ASFLAGS      += -DFPU387 -DFPU_REG_RTN
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-
-# User a larger stack if requested
-
-.IF $(STKSIZE)
-    LDFLAGS     += =$(STKSIZE)
-.ENDIF
-
-# Optionally compile for 16 bit Windows
-.IF $(USE_WIN16)
-.IF $(BUILD_DLL)
-   CFLAGS       += -WD -DBUILD_DLL
-   ASFLAGS      += -DBUILD_DLL
-.ELSE
-   CFLAGS       += -WA
-.ENDIF
-   DX_ASFLAGS   += -D__WINDOWS16__
-   LIB_OS       = WIN16
-.ELSE
-   USE_REALDOS	:= 1
-   LIB_OS       = DOS16
-.END
-
-# Place to look for PMODE library files
-
-PMLIB           := pm.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(SC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= sc16.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/sc32.mk b/board/MAI/bios_emulator/scitech/makedefs/sc32.mk
deleted file mode 100644
index 9ca757088a..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/sc32.mk
+++ /dev/null
@@ -1,178 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Symantec C++ 6.x/7.x 32 bit version. Supports the DOSX
-#               extender, FlashTek X32 and Phar Lap's TNT DOS Extender
-#               and 32 bit Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : USE_TNT USE_X32 USE_X32VM SC_LIBBASE
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := sc       # C-compiler and flags
-   CFLAGS       := -Jm
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-.IF $(USE_WIN32)
-   ASFLAGS      := /t /mx /m /D__FLAT__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ELSE
-   ASFLAGS      := /t /mx /m /DES_NOT_DS /D__COMM__ /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := sc       # Loader and flags
-   LD_FLAGS      =
-   RC           := rcc      # WIndows resource compiler
-   RCFLAGS      := -32      # Mark as Win32 compatible resources
-   LIB          := lib      # Librarian
-   LIBFLAGS     := /N /B
-   ILIB         := implib   # Import librarian
-   ILIBFLAGS    :=
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -g       # Turn on debugging for C compiler (FlashView)
-.IF $(USE_TNT)
-   LDFLAGS      += -fullsym # Turn on debugging for TNT 386link linker
-.END
-.IF $(USE_X32) or $(USE_X32VM)
-   LDFLAGS      += -L/map   # Turn on debugging for FlashView debugger
-.END
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -5 -o+all
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -5 -o+space
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += -ff -DFPU387
-   ASFLAGS      += -DFPU387 -DFPU_REG_RTN
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-
-# User a larger stack if requested
-
-.IF $(STKSIZE)
-    LDFLAGS     += =$(STKSIZE)
-.ENDIF
-
-.IF $(USE_TNT)                  # Use Phar Lap's TNT DOS Extender
-   CFLAGS       += -mp
-   DX_CFLAGS    += -DTNT
-   ASFLAGS      += /D__FLAT__
-   DX_ASFLAGS   += -DTNT
-   LD           := 386link
-   LDFLAGS      += @sc32.dos -exe $@
-   LIB_OS       = DOS32
-.ELIF $(USE_X32VM)              # Use FlashTek X-32VM DOS extender
-   CFLAGS       += -mx
-   DX_CFLAGS    += -DX32VM
-   ASFLAGS      += /D__X386__
-   DX_ASFLAGS   += -DX32VM
-   LD           := sc
-   LDFLAGS      += $(CFLAGS) x32v.lib
-   LIB_OS       = DOS32
-.ELIF $(USE_X32)                # Use FlashTek X-32 DOS extender
-   CFLAGS       += -mx
-   DX_CFLAGS    += -DX32VM
-   ASFLAGS      += /D__X386__
-   DX_ASFLAGS   += -DX32VM
-   LD           := sc
-   LDFLAGS      += $(CFLAGS) x32.lib
-   LIB_OS       = DOS32
-.ELIF $(USE_WIN32)              # Build 32 bit Windows NT app
-.IF $(BUILD_DLL)
-   CFLAGS       += -WD -mn
-   ASFLAGS      += -DBUILD_DLL
-.ELSE
-   CFLAGS       += -WA -mn
-.ENDIF
-   DX_ASFLAGS   += -D__WINDOWS32__
-   LIB_OS       = WIN32
-.ELSE                           # Use default Symantec DOSX extender
-   USE_DOSX     := 1
-   USE_REALDOS	:= 1
-   CFLAGS       += -mx
-   DX_CFLAGS    += -DDOSX
-   ASFLAGS      += /D__X386__
-   DX_ASFLAGS   += -DDOSX
-   LD           := sc
-   LDFLAGS      += $(CFLAGS)
-   LIB_OS       = DOS32
-.END
-
-# Place to look for PMODE library files
-
-.IF $(USE_TNT)
-PMLIB           := tnt\pm.lib
-.ELIF $(USE_X32)
-PMLIB           := x32\pm.lib
-.ELSE
-PMLIB           := dosx\pm.lib
-.END
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(SC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= sc32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/startup.mk b/board/MAI/bios_emulator/scitech/makedefs/startup.mk
deleted file mode 100644
index d8b2ba2b9b..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/startup.mk
+++ /dev/null
@@ -1,161 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Common startup script that defines all variables common to
-#				all startup scripts. These define the DMAKE runtime
-#				environment and the values are dependant on the version of
-#				DMAKE in use.
-#
-#############################################################################
-
-# Disable warnings for macros redefined here that were given
-# on the command line.
-__.SILENT       := $(.SILENT)
-.SILENT         := yes
-
-# Import enivornment variables that we use common to all compilers
-.IMPORT .IGNORE : TEMP SHELL COMSPEC INCLUDE LIB SCITECH PRIVATE SCITECH_LIB
-.IMPORT .IGNORE : DBG OPT OPT_SIZE SHW BETA USE_WIN32 FPU BUILD_DLL BUILD_FOR_DLL
-.IMPORT .IGNORE : IMPORT_DLL USE_TASMX WIN32_GUI USE_WIN16 USE_NASM CHECKED
-.IMPORT .IGNORE : OS2_SHELL SOFTICE_PATH MAX_WARN USE_SOFTICE USE_TASM32
-.IMPORT .IGNORE : DLL_START_TASM USE_SNAP USE_X11 USE_LINUX STATIC_LIBS LIBC
-.IMPORT .IGNORE : SHOW_ARGS BOOT_STRAP_DMAKE
-   TMPDIR := $(TEMP)
-
-# Determine if the host machine is a Windows/DOS or Unix box
-.IF $(COMSPEC)
-   WIN32_HOST   := 1
-.ELSE
-   USE_NASM     := 1
-   UNIX_HOST    := 1
-.ENDIF
-
-# Setup to either user NASM or TASM as the assembler
-.IF $(USE_NASM)
-.ELSE
-   USE_TASM		:= 1
-.ENDIF
-
-.IF $(UNIX_HOST)
-# Standard file suffix definitions
-#
-# NOTE: Linux/Unix does not require any extenion for executeable files, but you
-#       can use an extension if you wish. We use the .exe extension for building
-#       executeable files so that we can use implicit rules to make the
-#       makefiles simpler and more portable between systems (exe also makes it
-#       easier for cross-compile/debugging situations). When you install
-#       the files to a local bin directory, you will probably want to remove
-#       the .exe extension.
-   L            := .a   	# Libraries
-   E            := .exe   	# Executables for glibc
-   O            := .o   	# Objects
-   A            := .asm   	# Assembler sources
-   S            := .s       # GNU assembler sources
-   P            := .cpp   	# C++ sources
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := -l		# Library link prefix (name of library on link command line)
-   LE           := 		    # Library link suffix (extension of library on link command line)
-
-# We use the Unix shell at all times
-   SHELL		:= /bin/sh
-   SHELLFLAGS   := -c
-
-.ELSE
-# Standard file DOS/Win/OS2 suffix definitions
-   L            := .lib   	# Libraries
-.IF $(USE_SNAP)
-   E            := .sxe   	# Snap Executables
-   D            := .sll  	# Snap Dynamic Link Library file
-.ELSE
-   E            := .exe   	# Executables
-   D            := .dll   	# Dynamic Link Library file
-.ENDIF
-   O            := .obj   	# Objects
-   A            := .asm   	# Assembler sources
-   P            := .cpp   	# C++ sources
-   R            := .res   	# Compiled resource file
-   S			:= .s		# Assyntax.h style assembler
-
-# File prefix/suffix definitions. The following prefixes are defined, and are
-# used primarily to abstract between the Unix style libXX.a naming convention
-# and the DOS/Windows/OS2 naming convention of XX.lib.
-   LP           := 			# LP - Library file prefix (name of file on disk)
-   LL           := 			# Library link prefix (name of library on link command line)
-   LE           := .lib		# Library link suffix (extension of library on link command line)
-
-# We use the DOS/Win/OS2 style shell at all times
-   SHELL        := $(COMSPEC)
-   GROUPSHELL   := $(SHELL)
-   SHELLFLAGS   := $(SWITCHAR)c
-   GROUPFLAGS   := $(SHELLFLAGS)
-   SHELLMETAS   := *"?<>
-.IF $(OS2_SHELL)
-   GROUPSUFFIX  := .cmd
-.ELSE
-   GROUPSUFFIX  := .bat
-.ENDIF
-   DIRSEPSTR    := \\
-   DIVFILE       = $(TMPFILE:s,/,\)
-
-.ENDIF
-
-# Standard Unix style shell commands. Since these do not exist on
-# regular DOS/Win/OS2 installations we use our own '' versions
-# instead. To boostrtap a new OS you may wish to use the regular
-# unix versions.
-
-.IF $(BOOT_STRAP_DMAKE)
-   CP			:= cp
-   MD			:= mkdir
-   RM			:= rm
-   ECHO			:= echo
-.ELSE
-   CP			:= k_cp
-   MD			:= k_md
-   RM			:= k_rm
-   ECHO			:= k_echo
-.ENDIF
-
-# Definition of $(MAKE) macro for recursive makes.
-   MAKE = $(MAKECMD) $(MFLAGS)
-
-# Macro to install a library file
-   INSTALL      := $(CP)
-
-# DMAKE uses this recipe to remove intermediate targets
-.REMOVE :; $(RM) -f $<
-
-# Turn warnings back to previous setting.
-.SILENT := $(__.SILENT)
-
-# We dont use TABS in our makefiles
-.NOTABS         := yes
diff --git a/board/MAI/bios_emulator/scitech/makedefs/va32.mk b/board/MAI/bios_emulator/scitech/makedefs/va32.mk
deleted file mode 100644
index fbca523922..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/va32.mk
+++ /dev/null
@@ -1,163 +0,0 @@
-#############################################################################
-#
-#                                       SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               IBM VisualAge C++ 3.0 OS/2 32-bit version.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : VA_LIBBASE USE_OS232 USE_OS2GUI FULLSCREEN NOOPT MAX_WARN
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := icc
-   CPP          := icc
-   CFLAGS       := /Q /G5 /Gl+ /Fi /Si /J- /Ss+ /Sp1 /Gm+ /I.
-.IF $(USE_NASM)
-   AS           := nasm
-   ASFLAGS      := -t -f obj -F null -d__FLAT__ -dSTDCALL_MANGLE -d__NOU_VAR__ -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-.ELSE
-   AS           := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__FLAT__ /DSTDCALL_MANGLE /D__NOU_VAR__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := ilink
-   LDFLAGS       = /noi /exepack:2 /packcode /packdata /align:32 /map /noe
-   RC           := rc
-   RCFLAGS      := -n -x2
-   LIB          := ilib
-   LIBFLAGS     := /nologo
-   ILIB         := implib
-   ILIBFLAGS    := /nologo
-   IPFC         := ipfc
-   IPFCFLAGS    :=
-   IBMCOBJ      := 1
-
-# Set the compiler warning level
-.IF $(MAX_WARN)
-   CFLAGS       += /W3
-.ELSE
-   CFLAGS       += /W1
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += /Ti
-   LDFLAGS      += /DE
-.ELSE
-.IF $(USE_TASM)
-   ASFLAGS      += /q
-.ENDIF
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += /Gfi /O /Oi
-.ELIF $(OPT_SIZE)
-   CFLAGS       += /Gfi /O /Oc
-.ELIF $(NOOPT)
-   CFLAGS       += /O-
-.END
-
-# Optionally turn on direct i387 FPU instructions optimised for Pentium
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# Build 32-bit OS/2 apps
-.IF $(BUILD_DLL)
-   CFLAGS       += /Ge- /DBUILD_DLL
-   LDFLAGS      += /DLL /NOE
-   ASFLAGS      += -dBUILD_DLL
-.ELSE
-.IF $(USE_OS2GUI)
-   CFLAGS       += -D__OS2_PM__
-   LDFLAGS      += /PMTYPE:PM
-.ELSE
-.IF $(FULLSCREEN)
-   LDFLAGS      += /PMTYPE:NOVIO
-.ELSE
-   LDFLAGS      += /PMTYPE:VIO
-.ENDIF
-.ENDIF
-.ENDIF
-   DX_ASFLAGS   += -d__OS2__
-   LIB_OS       = os232
-
-# Place to look for PMODE library files
-
-.IF $(USE_OS2GUI)
-.IF $(USE_SDDPMDLL)
-#Note: This is OK for now but might need to be changed if the GUI PM library
-#      were really different
-PMLIB           := sddpmlib.lib
-.ELSE
-PMLIB           := pm_pm.lib
-.ENDIF
-.ELSE
-.IF $(USE_SDDPMDLL)
-PMLIB           := sddpmlib.lib
-.ELSE
-PMLIB           := pm.lib
-.ENDIF
-.ENDIF
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\debug
-CFLAGS          += /DCHECKED=1
-.ELSE
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(VA_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK    := va32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/va365.mk b/board/MAI/bios_emulator/scitech/makedefs/va365.mk
deleted file mode 100644
index 3a2eccbbce..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/va365.mk
+++ /dev/null
@@ -1,151 +0,0 @@
-#############################################################################
-#
-#  					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               IBM VisualAge C++ 3.65 OS/2 32-bit version.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : VA_LIBBASE USE_OS232 USE_OS2GUI FULLSCREEN NOOPT MAX_WARN
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := icc
-   CPP          := icc
-   CFLAGS       := /Q /G5l /Fi /Si /J- /Ss+ /Sp1 /Gm+ /I.
-.IF $(USE_NASM)
-   AS           := nasm
-   ASFLAGS      := -t -f obj -F null -d__FLAT__ -dSTDCALL_MANGLE -d__NOU_VAR__ -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-.ELSE
-   AS           := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__FLAT__ /DSTDCALL_MANGLE /D__NOU_VAR__ /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := ilink
-   LDFLAGS       = /noi /exepack /packcode /packdata /align:32 /map /noe
-   RC           := rc
-   RCFLAGS      := /nologo
-   LIB          := ilib
-   LIBFLAGS     := /nologo
-   ILIB         := implib
-   ILIBFLAGS    := /nologo
-   IBMCOBJ      := 1
-
-# Set the compiler warning level
-.IF $(MAX_WARN)
-   CFLAGS       += /W3
-.ELSE
-   CFLAGS       += /W1
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += /Ti
-   LDFLAGS      += /DE
-.ELSE
-.IF $(USE_TASM)
-   ASFLAGS      += /q
-.ENDIF
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += /Gfi /O /Oi
-.ELIF $(OPT_SIZE)
-   CFLAGS       += /Gfi /O /Oc
-.ELIF $(NOOPT)
-   CFLAGS       += /O-
-.END
-
-# Optionally turn on direct i387 FPU instructions optimised for Pentium
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# Build 32-bit OS/2 apps
-.IF $(BUILD_DLL)
-   CFLAGS       += /Gme- /DBUILD_DLL
-   LDFLAGS      += /DLL /NOE
-   ASFLAGS      += -dBUILD_DLL
-.ELSE
-.IF $(USE_OS2GUI)
-   CFLAGS       += -D__OS2_PM__
-   LDFLAGS      += /PMTYPE:PM
-.ELSE
-.IF $(FULLSCREEN)
-   LDFLAGS      += /PMTYPE:NOVIO
-.ELSE
-   LDFLAGS      += /PMTYPE:VIO
-.ENDIF
-.ENDIF
-.ENDIF
-   DX_ASFLAGS   += -d__OS2__
-   LIB_OS       = os232
-
-# Place to look for PMODE library files
-
-.IF $(USE_OS2GUI)
-PMLIB           := pm_pm.lib
-.ELSE
-PMLIB           := pm.lib
-.ENDIF
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\debug
-CFLAGS          += /DCHECKED=1
-.ELSE
-LIB_BASE_DIR    := $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(VA_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK    := va365.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/vc16.mk b/board/MAI/bios_emulator/scitech/makedefs/vc16.mk
deleted file mode 100644
index 913bf9c3e4..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/vc16.mk
+++ /dev/null
@@ -1,128 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Microsoft Visual C++ 1.x 16 bit version. Supports 16 bit
-#               DOS and Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : VC_LIBBASE
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := cl       # C-compiler and flags
-   CFLAGS       := /YX /w /G3 /Gs
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__COMM__ /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := cl       # Loader and flags
-   LDFLAGS       = $(CFLAGS)
-   RC           := rc       # WIndows resource compiler
-   RCFLAGS      :=
-   LIB          := lib      # Librarian
-   LIBFLAGS     := /NOI /NOE
-   ILIB         := implib   # Import librarian
-   ILIBFLAGS    := /noignorecase
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += /Yd /Zi  # Turn on debugging for C compiler
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += /Ox
-.END
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += /FPi87 /DFPU387
-   ASFLAGS      += /DFPU387 /DFPU_REG_RTN
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += /DBETA
-   ASFLAGS      += /DBETA
-.END
-
-# Use a larger stack during linking if requested ???? How the fuck do you
-# specify linker options on the CL command line?????
-
-.IF $(STKSIZE)
-.ENDIF
-
-# Optionally compile for 16 bit Windows
-.IF $(USE_WIN16)
-.IF $(BUILD_DLL)
-   CFLAGS       += /GD /Alfw /DBUILD_DLL
-   ASFLAGS      += -DBUILD_DLL
-.ELSE
-   CFLAGS       += /GA /AL
-.ENDIF
-   DX_ASFLAGS   += -D__WINDOWS16__
-   LIB_OS       = WIN16
-.ELSE
-   USE_REALDOS	:= 1
-   CFLAGS       += /AL
-   LIB_OS       = DOS16
-.END
-
-# Place to look for PMODE library files
-
-PMLIB           := pm.lib
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(VC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= vc16.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/vc32.mk b/board/MAI/bios_emulator/scitech/makedefs/vc32.mk
deleted file mode 100644
index 11c9071fb8..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/vc32.mk
+++ /dev/null
@@ -1,226 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Microsoft Visual C++ 2.x 32 bit version. Supports Phar Lap
-#               TNT DOS Extender and 32 bit Windows development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : TNT_PATH VC_LIBBASE DOSSTYLE USE_TNT USE_RTTARGET MSVCDIR
-.IMPORT .IGNORE : USE_VXD USE_NTDRV USE_W2KDRV NT_DDKROOT USE_RTTI USE_CPPEXCEPT
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := cl       # C-compiler and flags
-   CFLAGS       :=
-.IF $(USE_NASM)
-   AS			:= nasm
-   ASFLAGS      := -t -f win32 -F null -d__FLAT__ -dSTDCALL_MANGLE -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   ASFLAGS      := /t /mx /m /D__FLAT__ /DSTDCALL_MANGLE /iINCLUDE /i$(SCITECH)\INCLUDE
-.ENDIF
-   LD           := cl
-.IF $(USE_WIN32)
-   LDFLAGS       = $(CFLAGS)
-.IF $(USE_NTDRV)
-   LDENDFLAGS   = -link /INCREMENTAL:NO /DRIVER /SUBSYSTEM:NATIVE,4.00 /VERSION:4.00 /MACHINE:I386 /NODEFAULTLIB /DEBUGTYPE:CV /PDB:NONE /ALIGN:0x20 /BASE:0x10000 /ENTRY:DriverEntry@8
-	#/MERGE:_page=page /MERGE:_text=.text /MERGE:.rdata=.text
-.ELIF $(WIN32_GUI)
-   LDENDFLAGS   = -link /INCREMENTAL:NO /DEF:$(@:b).def /SUBSYSTEM:WINDOWS /MACHINE:I386 /DEBUGTYPE:CV /PDB:NONE
-.ELSE
-   LDENDFLAGS   = -link /INCREMENTAL:NO /SUBSYSTEM:CONSOLE /MACHINE:I386 /DEBUGTYPE:CV /PDB:NONE
-.ENDIF
-.ELSE
-   LDFLAGS       = $(CFLAGS)
-   LDENDFLAGS   := -link -stub:$(TNT_PATH:s/\/\\)\\bin\\gotnt.exe /PDB:NONE
-.ENDIF
-   RC           := rc       # Watcom resource compiler
-   RCFLAGS      :=          # Mark as Win32 compatible resources
-   LIB          := lib      # Librarian
-   LIBFLAGS     :=
-   ILIB         := lib      # Import librarian
-   ILIBFLAGS    := /MACHINE:IX86
-   INTEL_X86	:= 1
-   NMSYM   		:= $(SOFTICE_PATH)\nmsym.exe
-.IF $(USE_NTDRV)
-   NMSYMFLAGS	:= /TRANSLATE:source,package,always /PROMPT /SOURCE:$(MSVCDIR)\crt\src\intel;$(SCITECH)\src\pm;$(SCITECH)\src\pm\common;$(SCITECH)\src\pm\ntdrv
-.ELSE
-   NMSYMFLAGS	:= /TRANSLATE:source,package,always /PROMPT /SOURCE:$(SCITECH)\src\pm;$(SCITECH)\src\pm\common;$(SCITECH)\src\pm\win32
-.ENDIF
-
-# Set the compiler warning level
-.IF $(MAX_WARN)
-   CFLAGS       += -W3
-.ELSE
-   CFLAGS       += -W1
-.ENDIF
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += /Yd /Zi  # Turn on debugging for C compiler
-.IF $(USE_TASM)
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-.ENDIF
-.ELSE
-.IF $(USE_TASM)
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.ENDIF
-.END
-
-# Optionally turn on optimisations
-.IF $(VC_LIBBASE) == vc5
-.IF $(OPT)
-   CFLAGS       += /G6 /O2 /Ox /Oi-
-.ELIF $(OPT_SIZE)
-   CFLAGS       += /G6 /O1
-.END
-.ELSE
-.IF $(OPT)
-   CFLAGS       += /G5 /O2 /Ox
-.ELIF $(OPT_SIZE)
-   CFLAGS       += /G5 /O1
-.END
-.ENDIF
-
-# Optionally turn on direct i387 FPU instructions
-
-.IF $(FPU)
-   CFLAGS       += /DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += /DBETA
-   ASFLAGS      += -dBETA
-.END
-
-# Use a larger stack during linking if requested, or use a default stack
-# of 50k. The usual default stack provided by Visual C++ is *way* to small
-# for real 32 bit code development.
-
-.IF $(USE_WIN32)
-	# Not necessary for Win32 code.
-.ELSE
-.IF $(STKSIZE)
-	LDENDFLAGS  += /STACK:$(STKSIZE)
-.ELSE
-	LDENDFLAGS  += /STACK:51200
-.ENDIF
-.ENDIF
-
-# DOS extender dependant flags
-.IF $(USE_NTDRV)				# Build 32 bit Windows NT driver
-   CFLAGS       += /LD /Zl /Gy /Gz /GF /D__NT_DRIVER__ /D_X86_=1 /Di386=1
-.IF $(DBG)
-   CFLAGS       += /QIf
-.ENDIF
-   ASFLAGS      +=
-   DEF_LIBS		:= int64.lib ntoskrnl.lib hal.lib
-   DX_ASFLAGS   += -d__NT_DRIVER__
-.IF $(USE_W2KDRV)				# Build 32 bit Windows 2000 driver
-   LIB_OS       = W2KDRV
-.ELSE
-   LIB_OS       = NTDRV
-.ENDIF
-.ELIF $(USE_WIN32)              # Build 32 bit Windows NT app
-.IF $(WIN32_GUI)
-.ELSE
-    CFLAGS       += -D__CONSOLE__
-.ENDIF
-.IF $(BUILD_DLL)
-   CFLAGS       += /MT /LD /DBUILD_DLL
-   ASFLAGS      += -dBUILD_DLL
-.IF $(NO_RUNTIME)
-   LDENDFLAGS   += /NODEFAULTLIB
-   CFLAGS 		+= /Zl
-   DEF_LIBS		:=
-.ELSE
-   DEF_LIBS		:= kernel32.lib user32.lib gdi32.lib advapi32.lib shell32.lib winmm.lib comdlg32.lib comctl32.lib ole32.lib oleaut32.lib version.lib winspool.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib rpcrt4.lib
-.ENDIF
-.ELSE
-   CFLAGS       += /MT
-   DEF_LIBS		:= kernel32.lib user32.lib gdi32.lib advapi32.lib shell32.lib winmm.lib comdlg32.lib comctl32.lib ole32.lib oleaut32.lib version.lib winspool.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib rpcrt4.lib
-.ENDIF
-   DX_ASFLAGS   += -d__WINDOWS32__
-   LIB_OS       = WIN32
-.ELIF $(USE_RTTARGET)
-   CFLAGS       += -D__RTTARGET__
-   DX_CFLAGS    +=
-   DX_ASFLAGS   += -d__RTTARGET__
-   USE_REALDOS	:=
-   LIB_OS       = RTT32
-   DEF_LIBS     := cw32mt.lib
-.ELSE
-   USE_TNT      := 1
-   USE_REALDOS	:= 1
-   CFLAGS       += /MT /D__MSDOS32__
-   DX_CFLAGS    += -DTNT
-   DX_ASFLAGS   += -dTNT
-   LIB_OS       = DOS32
-   DEF_LIBS		:= dosx32.lib tntapi.lib
-.ENDIF
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= /DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(VC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Place to look for PMODE library files
-
-.IF $(USE_TNT)
-PMLIB           := $(LIB_BASE:s/\/\\)\\tnt\\pm.lib
-.ELSE
-PMLIB           := $(LIB_BASE:s/\/\\)\\pm.lib
-.ENDIF
-
-# Define which file contains our rules
-
-   RULES_MAK	:= vc32.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/wc16.mk b/board/MAI/bios_emulator/scitech/makedefs/wc16.mk
deleted file mode 100644
index e316f4c760..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/wc16.mk
+++ /dev/null
@@ -1,141 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Watcom C++ 10.x 16 bit version. Supports 16-bit DOS,
-#               16-bit Windows development and 16-bit OS/2 development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : WC_LIBBASE USE_WIN16 USE_OS216 USE_OS2GUI
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := wcc      # C-compiler and flags
-   CPP          := wpp      # C++-compiler and flags
-   CFLAGS       := -ml-zq-j-w2-s-fh -fhq
-.IF $(USE_TASM32)
-   AS           := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx    # Assembler and flags
-.ELSE
-   AS           := tasm     # Assembler and flags
-.ENDIF
-   AS           := tasm     # Assembler and flags
-   ASFLAGS      := /t /mx /m /D__LARGE__ /iINCLUDE /i$(SCITECH)\INCLUDE
-   LD           := wlink    # Loader and flags
-   LDFLAGS       =
-   RC           := wrc      # Watcom resource compiler
-   RCFLAGS      := /bt=windows
-   LIB          := wlib     # Librarian
-   LIBFLAGS     := -q
-   ILIB         := wlib     # Import librarian
-   ILIBFLAGS    := -c
-
-# Optionally turn on debugging information
-.IF $(DBG)
-   CFLAGS       += -d2      # Turn on debugging for C compiler
-   LIBFLAGS     += -p=128   # Larger page size for libraries with debug info!
-   ASFLAGS      += /zi      # Turn on debugging for assembler
-   LDFLAGS      += D A      # Turn on debugging for linker
-.ELSE
-   ASFLAGS      += /q       # Suppress object records not needed for linking
-.END
-
-# Optionally turn on optimisations
-.IF $(OPT)
-   CFLAGS       += -onatx-5
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -onaslmr-5
-.END
-
-# Optionally turn on direct i387 FPU instructions optimised for Pentium
-
-.IF $(FPU)
-   CFLAGS       += -fpi87-fp5-DFPU387
-   ASFLAGS      += -DFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -DBETA
-.END
-
-# Use a larger stack during linking if requested
-
-.IF $(STKSIZE)
-    LDFLAGS     += OP STACK=$(STKSIZE)
-.ENDIF
-
-.IF $(USE_OS216)
-.IF $(BUILD_DLL)
-    CFLAGS       += -bd-bt=os2-DBUILD_DLL
-    ASFLAGS      += -DBUILD_DLL
-.ELSE
-    CFLAGS       += -bt=os2
-.ENDIF
-    DX_ASFLAGS   += -D__OS216__
-    LIB_OS       = os216
-.ELIF $(USE_WIN16)
-.IF $(BUILD_DLL)
-    CFLAGS       += -bd-bt=windows-D_WINDOWS-DBUILD_DLL
-    ASFLAGS      += -DBUILD_DLL
-.ELSE
-    CFLAGS       += -bt=windows-D_WINDOWS
-.ENDIF
-    DX_ASFLAGS   += -D__WINDOWS16__
-    LIB_OS       = WIN16
-.ELSE
-    USE_REALDOS  := 1
-	LIB_OS       = DOS16
-.END
-
-# Place to look for PMODE library files
-
-PMLIB           := pm.lib,
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(WC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-# Define which file contains our rules
-
-   RULES_MAK	:= wc16.mk
diff --git a/board/MAI/bios_emulator/scitech/makedefs/wc32.mk b/board/MAI/bios_emulator/scitech/makedefs/wc32.mk
deleted file mode 100644
index e5175ca9ea..0000000000
--- a/board/MAI/bios_emulator/scitech/makedefs/wc32.mk
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-#					SciTech Multi-platform Graphics Library
-#
-#  ========================================================================
-#
-#    The contents of this file are subject to the SciTech MGL Public
-#    License Version 1.0 (the "License"); you may not use this file
-#    except in compliance with the License. You may obtain a copy of
-#    the License at http://www.scitechsoft.com/mgl-license.txt
-#
-#    Software distributed under the License is distributed on an
-#    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-#    implied. See the License for the specific language governing
-#    rights and limitations under the License.
-#
-#    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-#
-#    The Initial Developer of the Original Code is SciTech Software, Inc.
-#    All Rights Reserved.
-#
-#  ========================================================================
-#
-# Descripton:   Generic DMAKE startup makefile definitions file. Assumes
-#               that the SCITECH environment variable has been set to point
-#               to where all our stuff is installed. You should not need
-#               to change anything in this file.
-#
-#               Watcom C++ 10.x 32 bit version. Supports Rational's DOS4GW
-#               DOS Extender, PMODE/W, Causeway, FlashTek's X32-VM,
-#               Phar Lap's TNT DOS Extender, 32-bit Windows development and
-#				32-bit OS/2 development.
-#
-#############################################################################
-
-# Include standard startup script definitions
-.IMPORT: SCITECH
-.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
-
-# Import enivornment variables that we use
-.IMPORT .IGNORE : USE_TNT USE_X32 USE_X32VM USE_PMODEW STKCALL USE_CAUSEWAY
-.IMPORT .IGNORE : USE_WIN386 USE_OS232 USE_OS2GUI WC_LIBBASE NOOPT DOSSTYLE
-.IMPORT .IGNORE : OS2_SHELL USE_CODEVIEW USE_DOS32A USE_QNX4 LEAVE_LINKFILE
-
-# We are compiling for a 32 bit envionment
-   _32BIT_      := 1
-
-# Setup special environment for QNX 4 (Unix'ish)
-.IF $(USE_QNX4)
-   USE_QNX    	:= 1
-   L            := .a   	# Libraries
-   LP           := lib      # LP - Library file prefix (name of file on disk)
-   LL           := lib		# Library link prefix (name of library on link command line)
-   LE           := .a	    # Library link suffix (extension of library on link command line)
-.ENDIF
-
-# Default commands for compiling, assembling linking and archiving
-   CC           := wcc386
-   CPP          := wpp386
-   CFLAGS       := -zq-j-s-fpi87
-.IF $(USE_NASM)
-   AS			:= nasm
-   ASFLAGS      := -t -f obj -d__FLAT__ -dSTDCALL_MANGLE -iINCLUDE -i$(SCITECH)\INCLUDE
-.ELSE
-.IF $(USE_TASM32)
-   AS           := tasm32
-   DLL_TASM     := tasm32
-.ELIF $(USE_TASMX)
-   AS           := tasmx
-   DLL_TASM     := tasmx
-.ELSE
-   AS           := tasm
-   DLL_TASM     := tasm
-.ENDIF
-   ASFLAGS      := /t /mx /m /w-res /w-mcp /D__FLAT__ /DSTDCALL_MANGLE /iINCLUDE /i$(SCITECH)\INCLUDE
-   GAS			:= gcc
-   GAS_FLAGS 	:= -D__WATCOMC__ -D__SW_3S -D__SW_S -U__GNUC__ -UDJGPP -U__unix__ -Wall -I. -I$(SCITECH)\include -x assembler-with-cpp
-.ENDIF
-   LD           := wlink
-   LDFLAGS       =
-.IF $(USE_OS232)
-   RC           := rc
-.ELSE
-   RC           := wrc
-.ENDIF
-.IF $(USE_WIN32)
-   RCFLAGS      := -q /bt=nt
-.ELIF $(USE_OS232)
-.IF $(USE_OS2GUI)
-   CFLAGS		+= -D__OS2_PM__
-.ENDIF
-.ELSE
-   RCFLAGS      := -q
-.ENDIF
-   LIB          := wlib
-   LIBFLAGS     := -q
-   ILIB         := wlib
-   ILIBFLAGS    := -c
-   INTEL_X86	:= 1
-
-# Set the compiler warning level
-.IF $(MAX_WARN)
-   CFLAGS       += -w4
-.ELSE
-   CFLAGS       += -w1
-.ENDIF
-
-# Optionally turn on debugging information (Codeview format)
-.IF $(DBG)
-.IF $(USE_WIN32)
-.IF $(USE_CODEVIEW)
-   CFLAGS       += -d2 -hc
-   LDFLAGS      += D CODEVIEW OPT CVPACK
-.ELSE
-   CFLAGS       += -d2
-   LDFLAGS		+= D A
-.ENDIF
-.ELSE
-   CFLAGS       += -d2
-   LDFLAGS		+= D A
-.ENDIF
-   LIBFLAGS     += -p=768
-.IF $(USE_NASM)
-   ASFLAGS      += -F borland -g
-.ELSE
-.IF $(USE_TASM32)
-   ASFLAGS      += /q		# TASM32 fucks up Watcom C++ debug info
-.ELIF $(OS2_SHELL)
-   ASFLAGS      += /q		# TASM for OS/2 fucks up Watcom C++ debug info
-.ELSE
-   ASFLAGS      += /zi
-.ENDIF
-.ENDIF
-.ELSE
-.IF $(USE_NASM)
-   ASFLAGS      += -F null
-.ELSE
-   ASFLAGS      += /q
-.ENDIF
-.END
-
-# Optionally turn on optimisations (with or without stack conventions)
-.IF $(STKCALL)
-.IF $(OPT)
-   CFLAGS       += -onatx-5s-fp5
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -onaslmr-5s-fp5
-.ELIF $(NOOPT)
-   CFLAGS       += -od-5s
-.ELSE
-   CFLAGS       += -3s
-.END
-.ELSE
-.IF $(OPT)
-   CFLAGS       += -onatx-5r-fp5
-.ELIF $(OPT_SIZE)
-   CFLAGS       += -onaslmr-5r-fp5
-.ELIF $(NOOPT)
-   CFLAGS       += -od-5r
-.END
-.END
-
-# Optionally turn on direct i387 FPU instructions optimised for Pentium
-.IF $(FPU)
-   CFLAGS       += -DFPU387
-   ASFLAGS      += -dFPU387
-.END
-
-# Optionally compile a beta release version of a product
-.IF $(BETA)
-   CFLAGS       += -DBETA
-   ASFLAGS      += -dBETA
-.END
-
-.IF $(USE_TNT)                  # Use Phar Lap's TNT DOS Extender
-	CFLAGS       += -bt=nt -DTNT
-	ASFLAGS   	 += -dTNT
-	LDFLAGS      += SYS NT OP STUB=GOTNT.EXE
-	LIB_OS       = DOS32
-.ELIF $(USE_X32VM)              # Use FlashTek X-32VM DOS extender
-	CFLAGS       += -bt=dos
-	LDFLAGS      += SYS X32RV
-    DX_CFLAGS    += -DX32VM
-	DX_ASFLAGS   += -dX32VM
-    LIB_OS       = DOS32
-.ELIF $(USE_X32)                # Use FlashTek X-32 DOS extender
-	CFLAGS       += -bt=dos
-	LDFLAGS      += SYS X32R
-    DX_CFLAGS    += -DX32VM
-	DX_ASFLAGS   += -dX32VM
-    LIB_OS       = DOS32
-.ELIF $(USE_QNX4)               # Build QNX 4 app
-	CFLAGS       += -bt=qnx386
-	LDFLAGS      += SYS QNX386FLAT OP CASEEXACT OP OFFSET=40k OP STACK=32k
-    CFLAGS    	 += -D__QNX__ -D__UNIX__
-	ASFLAGS   	 += -d__QNX__ -d__UNIX__
-    LIB_OS       = QNX4
-.ELIF $(USE_OS232)
-.IF $(BUILD_DLL)
-	CFLAGS       += -bm-bd-bt=os2-sg-DBUILD_DLL
-	ASFLAGS      += -dBUILD_DLL
-.ELSE
-	CFLAGS       += -bm-bt=os2-sg
-.ENDIF
-	DX_ASFLAGS   += -d__OS2__
-    LIB_OS       = os232
-.ELIF $(USE_SNAP)               # Build 32 bit Snap app
-.IF $(BUILD_DLL)
-	CFLAGS       += -bm-bd-bt=nt-DBUILD_DLL
-	ASFLAGS      += -dBUILD_DLL
-.ELSE
-	CFLAGS       += -bm-bt=nt-D_WIN32
-.ENDIF
-	LDFLAGS	     += OP nodefaultlibs
-.IF $(STKCALL)
-	DEFLIBS		 := clib3s.lib,math3s.lib,noemu387.lib,
-.ELSE
-	DEFLIBS		 := clib3r.lib,math3r.lib,noemu387.lib,
-.ENDIF
-	LIB_OS       = SNAP
-.ELIF $(USE_WIN32)              # Build 32 bit Windows NT app
-.IF $(WIN32_GUI)
-.ELSE
-    CFLAGS       += -D__CONSOLE__
-.ENDIF
-.IF $(BUILD_DLL)
-	CFLAGS       += -bm-bd-bt=nt-sg-DBUILD_DLL -D_WIN32
-	ASFLAGS      += -dBUILD_DLL
-.ELSE
-	CFLAGS       += -bm-bt=nt-sg-D_WIN32
-.ENDIF
-	DX_ASFLAGS   += -d__WINDOWS32__
-	LIB_OS       = WIN32
-    DEFLIBS	     := kernel32.lib,user32.lib,gdi32.lib,advapi32.lib,shell32.lib,winmm.lib,comdlg32.lib,comctl32.lib,ole32.lib,oleaut32.lib,version.lib,winspool.lib,uuid.lib,wsock32.lib,rpcrt4.lib,
-.ELIF $(USE_WIN386)             # Build 32 bit Win386 extended app
-.IF $(BUILD_DLL)
-    CFLAGS       += -bd-bt=windows-DBUILD_DLL
-	ASFLAGS      += -dBUILD_DLL
-.ELSE
-    CFLAGS       += -bt=windows
-.ENDIF
-	DX_ASFLAGS   += -d__WIN386__
-    LIB_OS       = WIN386
-.ELIF $(USE_PMODEW)             # PMODE/W
-	CFLAGS       += -bt=dos
-	USE_DOS4GW   := 1
-	USE_REALDOS  := 1
-	LDFLAGS      += SYS PMODEW
-	DX_CFLAGS    += -DDOS4GW
-	DX_ASFLAGS   += -dDOS4GW
-	LIB_OS       = DOS32
-.ELIF $(USE_CAUSEWAY)           # Causeway
-	CFLAGS       += -bt=dos
-	USE_DOS4GW   := 1
-	USE_REALDOS  := 1
-	LDFLAGS      += SYS CAUSEWAY
-	DX_CFLAGS    += -DDOS4GW
-	DX_ASFLAGS   += -dDOS4GW
-	LIB_OS       = DOS32
-.ELIF $(USE_DOS32A)             # DOS32/A
-	CFLAGS       += -bt=dos
-	USE_DOS4GW   := 1
-	USE_REALDOS  := 1
-	LDFLAGS      += SYS DOS32A
-	DX_CFLAGS    += -DDOS4GW
-	DX_ASFLAGS   += -dDOS4GW
-	LIB_OS       = DOS32
-.ELSE                           # Use DOS4GW
-	CFLAGS       += -bt=dos
-	USE_DOS4GW   := 1
-	USE_REALDOS  := 1
-	LDFLAGS      += SYS DOS4G
-	DX_CFLAGS    += -DDOS4GW
-	DX_ASFLAGS   += -dDOS4GW
-	LIB_OS       = DOS32
-.END
-
-# Disable linking to default C runtime library and PM library
-
-.IF $(NO_RUNTIME)
-LDFLAGS			 += OP nodefaultlibs
-DEFLIBS          :=
-.ELSE
-
-# Place to look for PM library files
-
-.IF $(USE_SNAP)               	# Build 32 bit Snap app or dll
-PMLIB           :=
-.ELIF $(USE_WIN32)
-.IF $(STKCALL)
-PMLIB           := spm.lib,
-.ELSE
-PMLIB           := pm.lib,
-.ENDIF
-.ELIF $(USE_OS232)
-.IF $(STKCALL)
-.IF $(USE_OS2GUI)
-PMLIB           := spm_pm.lib,
-.ELSE
-PMLIB           := spm.lib,
-.ENDIF
-.ELSE
-.IF $(USE_OS2GUI)
-PMLIB           := pm_pm.lib,
-.ELSE
-PMLIB           := pm.lib,
-.ENDIF
-.ENDIF
-.ELIF $(USE_QNX4)
-.IF $(STKCALL)
-PMLIB           := libspm.a,
-.ELSE
-PMLIB           := libpm.a,
-.ENDIF
-.ELIF $(USE_TNT)
-.IF $(STKCALL)
-PMLIB           := tnt\spm.lib,
-.ELSE
-PMLIB           := tnt\pm.lib,
-.ENDIF
-.ELIF $(USE_X32)
-.IF $(STKCALL)
-PMLIB           := x32\spm.lib,
-.ELSE
-PMLIB           := x32\pm.lib,
-.ENDIF
-.ELSE
-.IF $(STKCALL)
-PMLIB           := dos4gw\spm.lib,
-.ELSE
-PMLIB           := dos4gw\pm.lib,
-.ENDIF
-.ENDIF
-.ENDIF
-
-# Define the base directory for library files
-
-.IF $(CHECKED)
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\debug
-CFLAGS			+= -DCHECKED=1
-.ELSE
-LIB_BASE_DIR	:= $(SCITECH_LIB)\lib\release
-.ENDIF
-
-# Define where to install library files
-   LIB_BASE     := $(LIB_BASE_DIR)\$(LIB_OS)\$(WC_LIBBASE)
-   LIB_DEST     := $(LIB_BASE)
-
-    LDFLAGS += op map
-
-# Define which file contains our rules
-
-   RULES_MAK	:= wc32.mk
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/besys.c b/board/MAI/bios_emulator/scitech/src/biosemu/besys.c
deleted file mode 100644
index 1512ce9bf9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/besys.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file includes BIOS emulator I/O and memory access
-*               functions.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-
-/*------------------------------- Macros ----------------------------------*/
-
-/* Macros to read and write values to x86 bus memory. Replace these as
- * necessary if you need to do something special to access memory over
- * the bus on a particular processor family.
- */
-
-#define readb(base,off)     *((u8*)((u32)(base) + (off)))
-#define readw(base,off)     *((u16*)((u32)(base) + (off)))
-#define readl(base,off)     *((u32*)((u32)(base) + (off)))
-#define writeb(v,base,off)  *((u8*)((u32)(base) + (off))) = (v)
-#define writew(v,base,off)  *((u16*)((u32)(base) + (off))) = (v)
-#define writel(v,base,off)  *((u32*)((u32)(base) + (off))) = (v)
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef DEBUG
-# define DEBUG_MEM()        (M.x86.debug & DEBUG_MEM_TRACE_F)
-#else
-# define DEBUG_MEM()
-#endif
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-
-RETURNS:
-Byte value read from emulator memory.
-
-REMARKS:
-Reads a byte value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u8 X86API BE_rdb(
-    u32 addr)
-{
-    u8 val = 0;
-
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-	val = *(u8*)(_BE_env.biosmem_base + addr - 0xC0000);
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-	val = readb(_BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size - 1) {
-DB(     printk("mem_read: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-	val = *(u8*)(M.mem_base + addr);
-	}
-DB( if (DEBUG_MEM())
-	printk("%#08x 1 -> %#x\n", addr, val);)
-    return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-
-RETURNS:
-Word value read from emulator memory.
-
-REMARKS:
-Reads a word value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u16 X86API BE_rdw(
-    u32 addr)
-{
-    u16 val = 0;
-
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    addr -= 0xC0000;
-	    val = ( *(u8*)(_BE_env.biosmem_base + addr) |
-		   (*(u8*)(_BE_env.biosmem_base + addr + 1) << 8));
-	    }
-	else
-#endif
-	    val = *(u16*)(_BE_env.biosmem_base + addr - 0xC0000);
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    addr -= 0xA0000;
-	    val = ( readb(_BE_env.busmem_base, addr) |
-		   (readb(_BE_env.busmem_base, addr + 1) << 8));
-	    }
-	else
-#endif
-	    val = readw(_BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size - 2) {
-DB(     printk("mem_read: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    val = ( *(u8*)(M.mem_base + addr) |
-		   (*(u8*)(M.mem_base + addr + 1) << 8));
-	    }
-	else
-#endif
-	    val = *(u16*)(M.mem_base + addr);
-	}
-DB( if (DEBUG_MEM())
-	printk("%#08x 2 -> %#x\n", addr, val);)
-    return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-
-RETURNS:
-Long value read from emulator memory.
-
-REMARKS:
-Reads a long value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u32 X86API BE_rdl(
-    u32 addr)
-{
-    u32 val = 0;
-
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x3) {
-	    addr -= 0xC0000;
-	    val = ( *(u8*)(_BE_env.biosmem_base + addr + 0) |
-		   (*(u8*)(_BE_env.biosmem_base + addr + 1) << 8) |
-		   (*(u8*)(_BE_env.biosmem_base + addr + 2) << 16) |
-		   (*(u8*)(_BE_env.biosmem_base + addr + 3) << 24));
-	    }
-	else
-#endif
-	    val = *(u32*)(_BE_env.biosmem_base + addr - 0xC0000);
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x3) {
-	    addr -= 0xA0000;
-	    val = ( readb(_BE_env.busmem_base, addr) |
-		   (readb(_BE_env.busmem_base, addr + 1) <<  8) |
-		   (readb(_BE_env.busmem_base, addr + 2) << 16) |
-		   (readb(_BE_env.busmem_base, addr + 3) << 24));
-	    }
-	else
-#endif
-	    val = readl(_BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size - 4) {
-DB(     printk("mem_read: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x3) {
-	    val = ( *(u8*)(M.mem_base + addr + 0) |
-		   (*(u8*)(M.mem_base + addr + 1) << 8) |
-		   (*(u8*)(M.mem_base + addr + 2) << 16) |
-		   (*(u8*)(M.mem_base + addr + 3) << 24));
-	    }
-	else
-#endif
-	    val = *(u32*)(M.mem_base + addr);
-	}
-DB( if (DEBUG_MEM())
-	printk("%#08x 4 -> %#x\n", addr, val);)
-    return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-val     - Value to store
-
-REMARKS:
-Writes a byte value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrb(
-    u32 addr,
-    u8 val)
-{
-DB( if (DEBUG_MEM())
-	printk("%#08x 1 <- %#x\n", addr, val);)
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-	*(u8*)(_BE_env.biosmem_base + addr - 0xC0000) = val;
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-	writeb(val, _BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size-1) {
-DB(     printk("mem_write: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-	*(u8*)(M.mem_base + addr) = val;
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-val     - Value to store
-
-REMARKS:
-Writes a word value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrw(
-    u32 addr,
-    u16 val)
-{
-DB( if (DEBUG_MEM())
-	printk("%#08x 2 <- %#x\n", addr, val);)
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    addr -= 0xC0000;
-	    *(u8*)(_BE_env.biosmem_base + addr + 0) = (val >> 0) & 0xff;
-	    *(u8*)(_BE_env.biosmem_base + addr + 1) = (val >> 8) & 0xff;
-	    }
-	else
-#endif
-	    *(u16*)(_BE_env.biosmem_base + addr - 0xC0000) = val;
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    addr -= 0xA0000;
-	    writeb(val >> 0, _BE_env.busmem_base, addr);
-	    writeb(val >> 8, _BE_env.busmem_base, addr + 1);
-	    }
-	else
-#endif
-	    writew(val, _BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size-2) {
-DB(     printk("mem_write: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
-	    *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
-	    }
-	else
-#endif
-	    *(u16*)(M.mem_base + addr) = val;
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-addr    - Emulator memory address to read
-val     - Value to store
-
-REMARKS:
-Writes a long value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrl(
-    u32 addr,
-    u32 val)
-{
-DB( if (DEBUG_MEM())
-	printk("%#08x 4 <- %#x\n", addr, val);)
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    addr -= 0xC0000;
-	    *(u8*)(M.mem_base + addr + 0) = (val >>  0) & 0xff;
-	    *(u8*)(M.mem_base + addr + 1) = (val >>  8) & 0xff;
-	    *(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
-	    *(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
-	    }
-	else
-#endif
-	    *(u32*)(M.mem_base + addr - 0xC0000) = val;
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x3) {
-	    addr -= 0xA0000;
-	    writeb(val >>  0, _BE_env.busmem_base, addr);
-	    writeb(val >>  8, _BE_env.busmem_base, addr + 1);
-	    writeb(val >> 16, _BE_env.busmem_base, addr + 1);
-	    writeb(val >> 24, _BE_env.busmem_base, addr + 1);
-	    }
-	else
-#endif
-	    writel(val, _BE_env.busmem_base, addr - 0xA0000);
-	}
-    else if (addr > M.mem_size-4) {
-DB(     printk("mem_write: address %#lx out of range!\n", addr);)
-	HALT_SYS();
-	}
-    else {
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-	    *(u8*)(M.mem_base + addr + 0) = (val >>  0) & 0xff;
-	    *(u8*)(M.mem_base + addr + 1) = (val >>  8) & 0xff;
-	    *(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
-	    *(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
-	    }
-	else
-#endif
-	    *(u32*)(M.mem_base + addr) = val;
-	}
-}
-
-/* Debug functions to do ISA/PCI bus port I/O */
-
-#ifdef  DEBUG
-#define DEBUG_IO()          (M.x86.debug & DEBUG_IO_TRACE_F)
-
-u8 X86API BE_inb(int port)
-{
-    u8 val = PM_inpb(port);
-    if (DEBUG_IO())
-	printk("%04X:%04X:  inb.%04X -> %02X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    return val;
-}
-
-u16 X86API BE_inw(int port)
-{
-    u16 val = PM_inpw(port);
-    if (DEBUG_IO())
-	printk("%04X:%04X:  inw.%04X -> %04X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    return val;
-}
-
-u32 X86API BE_inl(int port)
-{
-    u32 val = PM_inpd(port);
-    if (DEBUG_IO())
-	printk("%04X:%04X:  inl.%04X -> %08X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    return val;
-}
-
-void X86API BE_outb(int port, u8 val)
-{
-    if (DEBUG_IO())
-	printk("%04X:%04X: outb.%04X <- %02X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    PM_outpb(port,val);
-}
-
-void X86API BE_outw(int port, u16 val)
-{
-    if (DEBUG_IO())
-	printk("%04X:%04X: outw.%04X <- %04X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    PM_outpw(port,val);
-}
-
-void X86API BE_outl(int port, u32 val)
-{
-    if (DEBUG_IO())
-	printk("%04X:%04X: outl.%04X <- %08X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
-    PM_outpd(port,val);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/bios.c b/board/MAI/bios_emulator/scitech/src/biosemu/bios.c
deleted file mode 100644
index c0f4a4b18e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/bios.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Module implementing the BIOS specific functions.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number being serviced
-
-REMARKS:
-Handler for undefined interrupts.
-****************************************************************************/
-static void X86API undefined_intr(
-    int intno)
-{
-    if (BE_rdw(intno * 4 + 2) == BIOS_SEG)
-	printk("biosEmu: undefined interrupt %xh called!\n",intno);
-    else
-	X86EMU_prepareForInt(intno);
-}
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number being serviced
-
-REMARKS:
-This function handles the default system BIOS Int 10h (the default is stored
-in the Int 42h vector by the system BIOS at bootup). We only need to handle
-a small number of special functions used by the BIOS during POST time.
-****************************************************************************/
-static void X86API int42(
-    int intno)
-{
-    if (M.x86.R_AH == 0x12 && M.x86.R_BL == 0x32) {
-	if (M.x86.R_AL == 0) {
-	    /* Enable CPU accesses to video memory */
-	    PM_outpb(0x3c2, PM_inpb(0x3cc) | (u8)0x02);
-	    return;
-	    }
-	else if (M.x86.R_AL == 1) {
-	    /* Disable CPU accesses to video memory */
-	    PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8)~0x02);
-	    return;
-	    }
-#ifdef  DEBUG
-	else {
-	    printk("biosEmu/bios.int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n",M.x86.R_AL);
-	    }
-#endif
-	}
-#ifdef  DEBUG
-    else {
-	printk("biosEmu/bios.int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n",M.x86.R_AH, M.x86.R_AL, M.x86.R_BL);
-	}
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number being serviced
-
-REMARKS:
-This function handles the default system BIOS Int 10h. If the POST code
-has not yet re-vectored the Int 10h BIOS interrupt vector, we handle this
-by simply calling the int42 interrupt handler above. Very early in the
-BIOS POST process, the vector gets replaced and we simply let the real
-mode interrupt handler process the interrupt.
-****************************************************************************/
-static void X86API int10(
-    int intno)
-{
-    if (BE_rdw(intno * 4 + 2) == BIOS_SEG)
-	int42(intno);
-    else
-	X86EMU_prepareForInt(intno);
-}
-
-/* Result codes returned by the PCI BIOS */
-
-#define SUCCESSFUL          0x00
-#define FUNC_NOT_SUPPORT    0x81
-#define BAD_VENDOR_ID       0x83
-#define DEVICE_NOT_FOUND    0x86
-#define BAD_REGISTER_NUMBER 0x87
-#define SET_FAILED          0x88
-#define BUFFER_TOO_SMALL    0x89
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number being serviced
-
-REMARKS:
-This function handles the default Int 1Ah interrupt handler for the real
-mode code, which provides support for the PCI BIOS functions. Since we only
-want to allow the real mode BIOS code *only* see the PCI config space for
-its own device, we only return information for the specific PCI config
-space that we have passed in to the init function. This solves problems
-when using the BIOS to warm boot a secondary adapter when there is an
-identical adapter before it on the bus (some BIOS'es get confused in this
-case).
-****************************************************************************/
-static void X86API int1A(
-    unused)
-{
-    u16 pciSlot;
-
-    /* Fail if no PCI device information has been registered */
-    if (!_BE_env.vgaInfo.pciInfo)
-	return;
-    pciSlot = (u16)(_BE_env.vgaInfo.pciInfo->slot.i >> 8);
-    switch (M.x86.R_AX) {
-	case 0xB101:                    /* PCI bios present? */
-	    M.x86.R_AL  = 0x00;         /* no config space/special cycle generation support */
-	    M.x86.R_EDX = 0x20494350;   /* " ICP" */
-	    M.x86.R_BX  = 0x0210;       /* Version 2.10 */
-	    M.x86.R_CL  = 0;            /* Max bus number in system */
-	    CLEAR_FLAG(F_CF);
-	    break;
-	case 0xB102:                    /* Find PCI device */
-	    M.x86.R_AH = DEVICE_NOT_FOUND;
-	    if (M.x86.R_DX == _BE_env.vgaInfo.pciInfo->VendorID &&
-		    M.x86.R_CX == _BE_env.vgaInfo.pciInfo->DeviceID &&
-		    M.x86.R_SI == 0) {
-		M.x86.R_AH = SUCCESSFUL;
-		M.x86.R_BX = pciSlot;
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB103:                    /* Find PCI class code */
-	    M.x86.R_AH = DEVICE_NOT_FOUND;
-	    if (M.x86.R_CL == _BE_env.vgaInfo.pciInfo->Interface &&
-		    M.x86.R_CH == _BE_env.vgaInfo.pciInfo->SubClass &&
-		    (u8)(M.x86.R_ECX >> 16) == _BE_env.vgaInfo.pciInfo->BaseClass) {
-		M.x86.R_AH = SUCCESSFUL;
-		M.x86.R_BX = pciSlot;
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB108:                    /* Read configuration byte */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		M.x86.R_CL = (u8)PCI_accessReg(M.x86.R_DI,0,PCI_READ_BYTE,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB109:                    /* Read configuration word */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		M.x86.R_CX = (u16)PCI_accessReg(M.x86.R_DI,0,PCI_READ_WORD,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB10A:                    /* Read configuration dword */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		M.x86.R_ECX = (u32)PCI_accessReg(M.x86.R_DI,0,PCI_READ_DWORD,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB10B:                    /* Write configuration byte */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		PCI_accessReg(M.x86.R_DI,M.x86.R_CL,PCI_WRITE_BYTE,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB10C:                    /* Write configuration word */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		PCI_accessReg(M.x86.R_DI,M.x86.R_CX,PCI_WRITE_WORD,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	case 0xB10D:                    /* Write configuration dword */
-	    M.x86.R_AH = BAD_REGISTER_NUMBER;
-	    if (M.x86.R_BX == pciSlot) {
-		M.x86.R_AH = SUCCESSFUL;
-		PCI_accessReg(M.x86.R_DI,M.x86.R_ECX,PCI_WRITE_DWORD,_BE_env.vgaInfo.pciInfo);
-		}
-	    CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
-	    break;
-	default:
-	    printk("biosEmu/bios.int1a: unknown function AX=%#04x\n", M.x86.R_AX);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the BIOS emulation functions for the specific
-PCI display device. We insulate the real mode BIOS from any other devices
-on the bus, so that it will work correctly thinking that it is the only
-device present on the bus (ie: avoiding any adapters present in from of
-the device we are trying to control).
-****************************************************************************/
-void _BE_bios_init(
-    u32 *intrTab)
-{
-    int                 i;
-    X86EMU_intrFuncs    bios_intr_tab[256];
-
-    for (i = 0; i < 256; ++i) {
-	intrTab[i] = BIOS_SEG << 16;
-	bios_intr_tab[i] = undefined_intr;
-	}
-    bios_intr_tab[0x10] = int10;
-    bios_intr_tab[0x1A] = int1A;
-    bios_intr_tab[0x42] = int42;
-    X86EMU_setupIntrFuncs(bios_intr_tab);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c b/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c
deleted file mode 100644
index 0052709cc6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Module implementing the system specific functions. This
-*               module is always compiled and linked in the OS depedent
-*               libraries, and never in a binary portable driver.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-#include <string.h>
-#include <stdlib.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-BE_sysEnv           _BE_env;
-#ifdef  __DRIVER__
-PM_imports  _VARAPI _PM_imports;
-#endif
-static X86EMU_memFuncs _BE_mem = {
-    BE_rdb,
-    BE_rdw,
-    BE_rdl,
-    BE_wrb,
-    BE_wrw,
-    BE_wrl,
-    };
-#ifdef  DEBUG
-static X86EMU_pioFuncs _BE_pio = {
-    BE_inb,
-    BE_inw,
-    BE_inl,
-    BE_outb,
-    BE_outw,
-    BE_outl,
-    };
-#else
-static X86EMU_pioFuncs _BE_pio = {
-    (void*)PM_inpb,
-    (void*)PM_inpw,
-    (void*)PM_inpd,
-    (void*)PM_outpb,
-    (void*)PM_outpw,
-    (void*)PM_outpd,
-    };
-#endif
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define OFF(addr)       (u16)(((addr) >> 0) & 0xffff)
-#define SEG(addr)       (u16)(((addr) >> 4) & 0xf000)
-
-/****************************************************************************
-PARAMETERS:
-debugFlags  - Flags to enable debugging options (debug builds only)
-memSize     - Amount of memory to allocate for real mode machine
-info        - Pointer to default VGA device information
-
-REMARKS:
-This functions initialises the BElib, and uses the passed in
-BIOS image as the BIOS that is used and emulated at 0xC0000.
-****************************************************************************/
-ibool PMAPI BE_init(
-    u32 debugFlags,
-    int memSize,
-    BE_VGAInfo *info)
-{
-#ifndef __DRIVER__
-    PM_init();
-#endif
-    memset(&M,0,sizeof(M));
-    if (memSize < 20480)
-	PM_fatalError("Emulator requires at least 20Kb of memory!\n");
-    if ((M.mem_base = (unsigned long)malloc(memSize)) == NULL)
-	PM_fatalError("Out of memory!");
-    M.mem_size = memSize;
-    _BE_env.busmem_base = (ulong)PM_mapPhysicalAddr(0xA0000,0x5FFFF,true);
-    M.x86.debug = debugFlags;
-    _BE_bios_init((u32*)info->LowMem);
-    X86EMU_setupMemFuncs(&_BE_mem);
-    X86EMU_setupPioFuncs(&_BE_pio);
-    BE_setVGA(info);
-    return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-debugFlags  - Flags to enable debugging options (debug builds only)
-
-REMARKS:
-This function allows the application to enable logging and debug flags
-on a function call basis, so we can specifically enable logging only
-for specific functions that are causing problems in debug mode.
-****************************************************************************/
-void PMAPI BE_setDebugFlags(
-    u32 debugFlags)
-{
-    M.x86.debug = debugFlags;
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Pointer to VGA device information to make current
-
-REMARKS:
-This function sets the VGA BIOS functions in the emulator to point to the
-specific VGA BIOS in use. This includes swapping the BIOS interrupt
-vectors, BIOS image and BIOS data area to the new BIOS. This allows the
-real mode BIOS to be swapped without resetting the entire emulator.
-****************************************************************************/
-void PMAPI BE_setVGA(
-    BE_VGAInfo *info)
-{
-    _BE_env.vgaInfo.pciInfo = info->pciInfo;
-    _BE_env.vgaInfo.BIOSImage = info->BIOSImage;
-    if (info->BIOSImage) {
-	_BE_env.biosmem_base = (ulong)info->BIOSImage;
-	_BE_env.biosmem_limit = 0xC0000 + info->BIOSImageLen-1;
-	}
-    else {
-	_BE_env.biosmem_base = _BE_env.busmem_base + 0x20000;
-	_BE_env.biosmem_limit = 0xC7FFF;
-	}
-    if (*((u32*)info->LowMem) == 0)
-	_BE_bios_init((u32*)info->LowMem);
-    memcpy((u8*)M.mem_base,info->LowMem,sizeof(info->LowMem));
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Pointer to VGA device information to retrieve current
-
-REMARKS:
-This function returns the VGA BIOS functions currently active in the
-emulator, so they can be restored at a later date.
-****************************************************************************/
-void PMAPI BE_getVGA(
-    BE_VGAInfo *info)
-{
-    info->pciInfo = _BE_env.vgaInfo.pciInfo;
-    info->BIOSImage = _BE_env.vgaInfo.BIOSImage;
-    memcpy(info->LowMem,(u8*)M.mem_base,sizeof(info->LowMem));
-}
-
-/****************************************************************************
-PARAMETERS:
-r_seg   - Segment for pointer to convert
-r_off   - Offset for pointer to convert
-
-REMARKS:
-This function maps a real mode pointer in the emulator memory to a protected
-mode pointer that can be used to directly access the memory.
-
-NOTE:   The memory is *always* in little endian format, son on non-x86
-	systems you will need to do endian translations to access this
-	memory.
-****************************************************************************/
-void * PMAPI BE_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    u32 addr = ((u32)r_seg << 4) + r_off;
-
-    if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-	return (void*)(_BE_env.biosmem_base + addr - 0xC0000);
-	}
-    else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-	return (void*)(_BE_env.busmem_base + addr - 0xA0000);
-	}
-    return (void*)(M.mem_base + addr);
-}
-
-/****************************************************************************
-PARAMETERS:
-len     - Return the length of the VESA buffer
-rseg    - Place to store VESA buffer segment
-roff    - Place to store VESA buffer offset
-
-REMARKS:
-This function returns the address of the VESA transfer buffer in real
-mode emulator memory. The VESA transfer buffer is always 1024 bytes long,
-and located at 15Kb into the start of the real mode memory (16Kb is where
-we put the real mode code we execute for issuing interrupts).
-
-NOTE:   The memory is *always* in little endian format, son on non-x86
-	systems you will need to do endian translations to access this
-	memory.
-****************************************************************************/
-void * PMAPI BE_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    *len = 1024;
-    *rseg = SEG(0x03C00);
-    *roff = OFF(0x03C00);
-    return (void*)(M.mem_base + ((u32)*rseg << 4) + *roff);
-}
-
-/****************************************************************************
-REMARKS:
-Cleans up and exits the emulator.
-****************************************************************************/
-void PMAPI BE_exit(void)
-{
-    free((void*)M.mem_base);
-    PM_freePhysicalAddr((void*)_BE_env.busmem_base,0x5FFFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-seg     - Segment of code to call
-off     - Offset of code to call
-regs    - Real mode registers to load
-sregs   - Real mode segment registers to load
-
-REMARKS:
-This functions calls a real mode far function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in the same
-structures.
-****************************************************************************/
-void PMAPI BE_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *regs,
-    RMSREGS *sregs)
-{
-    M.x86.R_EAX = regs->e.eax;
-    M.x86.R_EBX = regs->e.ebx;
-    M.x86.R_ECX = regs->e.ecx;
-    M.x86.R_EDX = regs->e.edx;
-    M.x86.R_ESI = regs->e.esi;
-    M.x86.R_EDI = regs->e.edi;
-    M.x86.R_DS = sregs->ds;
-    M.x86.R_ES = sregs->es;
-    M.x86.R_FS = sregs->fs;
-    M.x86.R_GS = sregs->gs;
-    M.x86.R_CS = (u16)seg;
-    M.x86.R_IP = (u16)off;
-    M.x86.R_SS = SEG(M.mem_size - 1);
-    M.x86.R_SP = OFF(M.mem_size - 1);
-    X86EMU_exec();
-    regs->e.cflag = M.x86.R_EFLG & F_CF;
-    regs->e.eax = M.x86.R_EAX;
-    regs->e.ebx = M.x86.R_EBX;
-    regs->e.ecx = M.x86.R_ECX;
-    regs->e.edx = M.x86.R_EDX;
-    regs->e.esi = M.x86.R_ESI;
-    regs->e.edi = M.x86.R_EDI;
-    sregs->ds = M.x86.R_DS;
-    sregs->es = M.x86.R_ES;
-    sregs->fs = M.x86.R_FS;
-    sregs->gs = M.x86.R_GS;
-}
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number to execute
-in      - Real mode registers to load
-out     - Place to store resulting real mode registers
-
-REMARKS:
-This functions calls a real mode interrupt function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in out stucture.
-****************************************************************************/
-int PMAPI BE_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    M.x86.R_EAX = in->e.eax;
-    M.x86.R_EBX = in->e.ebx;
-    M.x86.R_ECX = in->e.ecx;
-    M.x86.R_EDX = in->e.edx;
-    M.x86.R_ESI = in->e.esi;
-    M.x86.R_EDI = in->e.edi;
-    ((u8*)M.mem_base)[0x4000] = 0xCD;
-    ((u8*)M.mem_base)[0x4001] = (u8)intno;
-    ((u8*)M.mem_base)[0x4002] = 0xC3;
-    M.x86.R_CS = SEG(0x04000);
-    M.x86.R_IP = OFF(0x04000);
-    M.x86.R_SS = SEG(M.mem_size - 1);
-    M.x86.R_SP = OFF(M.mem_size - 1);
-    X86EMU_exec();
-    out->e.cflag = M.x86.R_EFLG & F_CF;
-    out->e.eax = M.x86.R_EAX;
-    out->e.ebx = M.x86.R_EBX;
-    out->e.ecx = M.x86.R_ECX;
-    out->e.edx = M.x86.R_EDX;
-    out->e.esi = M.x86.R_ESI;
-    out->e.edi = M.x86.R_EDI;
-    return out->x.ax;
-}
-
-/****************************************************************************
-PARAMETERS:
-intno   - Interrupt number to execute
-in      - Real mode registers to load
-out     - Place to store resulting real mode registers
-sregs   - Real mode segment registers to load
-
-REMARKS:
-This functions calls a real mode interrupt function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in out stucture.
-****************************************************************************/
-int PMAPI BE_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    M.x86.R_EAX = in->e.eax;
-    M.x86.R_EBX = in->e.ebx;
-    M.x86.R_ECX = in->e.ecx;
-    M.x86.R_EDX = in->e.edx;
-    M.x86.R_ESI = in->e.esi;
-    M.x86.R_EDI = in->e.edi;
-    M.x86.R_DS = sregs->ds;
-    M.x86.R_ES = sregs->es;
-    M.x86.R_FS = sregs->fs;
-    M.x86.R_GS = sregs->gs;
-    ((u8*)M.mem_base)[0x4000] = 0xCD;
-    ((u8*)M.mem_base)[0x4001] = (u8)intno;
-    ((u8*)M.mem_base)[0x4002] = 0xC3;
-    M.x86.R_CS = SEG(0x04000);
-    M.x86.R_IP = OFF(0x04000);
-    M.x86.R_SS = SEG(M.mem_size - 1);
-    M.x86.R_SP = OFF(M.mem_size - 1);
-    X86EMU_exec();
-    out->e.cflag = M.x86.R_EFLG & F_CF;
-    out->e.eax = M.x86.R_EAX;
-    out->e.ebx = M.x86.R_EBX;
-    out->e.ecx = M.x86.R_ECX;
-    out->e.edx = M.x86.R_EDX;
-    out->e.esi = M.x86.R_ESI;
-    out->e.edi = M.x86.R_EDI;
-    sregs->ds = M.x86.R_DS;
-    sregs->es = M.x86.R_ES;
-    sregs->fs = M.x86.R_FS;
-    sregs->gs = M.x86.R_GS;
-    return out->x.ax;
-}
-
-#ifdef  __DRIVER__
-
-/****************************************************************************
-REMARKS:
-Empty log function for binary portable DLL. The BPD is compiled without
-debug information, so very little is logged anyway so it is simpler this
-way.
-****************************************************************************/
-void printk(const char *msg, ...)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Fatal error handler called when a non-imported function is called by the
-driver. We leave this to a runtime error so that older applications and
-shell drivers will work with newer bpd drivers provided no newer functions
-are required by the driver itself. If they are, the application or shell
-driver needs to be recompiled.
-****************************************************************************/
-static void _PM_fatalErrorHandler(void)
-{
-    PM_fatalError("Unsupported PM_imports import function called! Please re-compile!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-beImp   - BE library imports
-beImp   - Generic emulator imports
-
-RETURNS:
-Pointer to exported function list
-
-REMARKS:
-This function initialises the BIOS emulator library and returns the list of
-loader library exported functions.
-{secret}
-****************************************************************************/
-BE_exports * _CEXPORT BE_initLibrary(
-    PM_imports *pmImp)
-{
-    static BE_exports _BE_exports = {
-	sizeof(BE_exports),
-	BE_init,
-	BE_setVGA,
-	BE_getVGA,
-	BE_mapRealPointer,
-	BE_getVESABuf,
-	BE_callRealMode,
-	BE_int86,
-	BE_int86x,
-	NULL,
-	BE_exit,
-	};
-    int     i,max;
-    ulong   *p;
-
-    /* Initialize all default imports to point to fatal error handler */
-    /* for upwards compatibility. */
-    max = sizeof(_PM_imports)/sizeof(BE_initLibrary_t);
-    for (i = 0,p = (ulong*)&_PM_imports; i < max; i++)
-	*p++ = (ulong)_PM_fatalErrorHandler;
-
-    /* Now copy all our imported functions */
-    memcpy(&_PM_imports,pmImp,MIN(sizeof(_PM_imports),pmImp->dwSize));
-    return &_BE_exports;
-}
-
-#endif  /* __DRIVER__ */
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h b/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h
deleted file mode 100644
index 23edebc95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Internal header file for the BIOS emulator library.
-*
-****************************************************************************/
-
-#ifndef __BIOSEMUI_H
-#define __BIOSEMUI_H
-
-#include <biosemu.h>
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#ifdef DEBUG
-#define DB(x)   x
-#else
-#define DB(x)
-#endif
-
-#define BIOS_SEG        0xfff0
-
-#define M               _X86EMU_env
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-/* bios.c */
-
-void    _BE_bios_init(u32 *intrTab);
-void    _BE_setup_funcs(void);
-
-/* besys.c */
-
-u8      X86API BE_rdb(u32 addr);
-u16     X86API BE_rdw(u32 addr);
-u32     X86API BE_rdl(u32 addr);
-void    X86API BE_wrb(u32 addr,u8 val);
-void    X86API BE_wrw(u32 addr,u16 val);
-void    X86API BE_wrl(u32 addr,u32 val);
-#ifdef  DEBUG
-u8      X86API BE_inb(int port);
-u16     X86API BE_inw(int port);
-u32     X86API BE_inl(int port);
-void    X86API BE_outb(int port, u8 val);
-void    X86API BE_outw(int port, u16 val);
-void    X86API BE_outl(int port, u32 val);
-#endif
-
-#endif /* __BIOSEMUI_H */
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/makefile b/board/MAI/bios_emulator/scitech/src/biosemu/makefile
deleted file mode 100644
index 80730b2997..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-#############################################################################
-#
-#                        BIOS emulator and interface
-#                      to Realmode X86 Emulator Library
-#
-#               Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-#  ========================================================================
-#
-#  Permission to use, copy, modify, distribute, and sell this software and
-#  its documentation for any purpose is hereby granted without fee,
-#  provided that the above copyright notice appear in all copies and that
-#  both that copyright notice and this permission notice appear in
-#  supporting documentation, and that the name of the authors not be used
-#  in advertising or publicity pertaining to distribution of the software
-#  without specific, written prior permission.  The authors makes no
-#  representations about the suitability of this software for any purpose.
-#  It is provided "as is" without express or implied warranty.
-#
-#  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-#  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-#  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-#  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-#  PERFORMANCE OF THIS SOFTWARE.
-#
-#  ========================================================================
-#
-# Descripton:   Generic makefile for the x86emu library. Requires
-#               the SciTech Software makefile definitions package to be
-#               installed, which uses the DMAKE make program.
-#
-#############################################################################
-
-.IMPORT .IGNORE: DEBUG
-
-#----------------------------------------------------------------------------
-# Define the lists of object files
-#----------------------------------------------------------------------------
-
-DLL_OBJS        = dllstart$O _pm_imp$O
-BIOS_OBJS       = biosemu$O bios$O besys$O
-X86_OBJS        = sys$O decode$O ops$O ops2$O prim_ops$O fpu$O debug$O
-CFLAGS          += -DSCITECH -I$(SCITECH)\src\x86emu
-
-.IF $(BUILD_DLL)
-
-CFLAGS          += -I$(PRIVATE)\include\drvlib -I$(SCITECH)\include\drvlib -D__DRIVER__
-ASFLAGS         += -d__DRIVER__
-EXELIBS         = drvlib$L
-
-.ELSE
-
-.IF $(DEBUG)
-CFLAGS          += -DDEBUG
-.ENDIF
-OBJECTS         = $(BIOS_OBJS) $(X86_OBJS)
-LIBCLEAN        = *.dll *.lib *.a
-LIBFILE         = $(LP)biosemu$L
-
-.ENDIF
-
-#----------------------------------------------------------------------------
-# Sample test programs
-#----------------------------------------------------------------------------
-
-all: $(LIBFILE) warmboot$E
-
-warmboot$E: warmboot$O $(LIBFILE)
-
-#----------------------------------------------------------------------------
-# Target to build the Binary Portable DLL target
-#----------------------------------------------------------------------------
-
-biosemu.dll: $(DLL_OBJS) $(BIOS_OBJS) $(X86_OBJS)
-
-#----------------------------------------------------------------------------
-# Target to build all Intel binary drivers
-#----------------------------------------------------------------------------
-
-.PHONY mkdrv:
-    @build wc11-w32 biosemu.dll -u BUILD_DLL=1 NO_RUNTIME=1 OPT=1
-    @$(CP) biosemu.dll $(PRIVATE)\nucleus\graphics\biosemu.bpd
-    @dmake cleanexe
-
-.PHONY db:
-    @build wc11-w32 biosemu.dll BUILD_DLL=1 NO_RUNTIME=1 OPT=1
-    @$(CP) biosemu.dll $(PRIVATE)\nucleus\graphics\biosemu.bpd
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ      = warmboot$O $(BIOS_OBJS) $(X86_OBJS) $(DLL_OBJS)
-DEPEND_SRC      = $(SCITECH)/src/x86emu;$(PRIVATE)/src/common
-.SOURCE:          $(SCITECH)/src/x86emu $(PRIVATE)/src/common
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross b/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross
deleted file mode 100644
index 9141003076..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross
+++ /dev/null
@@ -1,10 +0,0 @@
-CC = ppc-elf32-gcc
-AR = ppc-elf32-ar
-
-CFLAGS = -D__DRIVER__ -I../../include -DDEBUG -I.
-
-BIOS_OBJS = biosemu.o bios.o besys.o
-X86_OBJS = sys.o decode.o ops.o prim_ops.o fpu.o debug.o
-
-libbios.a: $(BIOS_OBJS)
-	$(AR) rcs libbios.a $(BIOS_OBJS)
\ No newline at end of file
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c b/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c
deleted file mode 100644
index 98d5fb8a62..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/****************************************************************************
-*
-*                        BIOS emulator and interface
-*                      to Realmode X86 Emulator Library
-*
-*               Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-* Developer:    Kendall Bennett
-*
-* Description:  Module to implement warm booting of all PCI/AGP controllers
-*               on the bus. We use the x86 real mode emulator to run the
-*               BIOS on the primary and secondary controllers to bring
-*               the cards up.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#include "biosemu.h"
-#ifndef _MAX_PATH
-#define _MAX_PATH 256
-#endif
-
-/*------------------------- Global Variables ------------------------------*/
-
-static PCIDeviceInfo    PCI[MAX_PCI_DEVICES];
-static int              NumPCI = -1;
-static int              BridgeIndex[MAX_PCI_DEVICES] = {0};
-static int              NumBridges;
-static PCIBridgeInfo    *AGPBridge = NULL;
-static int              DeviceIndex[MAX_PCI_DEVICES] = {0};
-static int              NumDevices;
-static u32              debugFlags = 0;
-static BE_VGAInfo       VGAInfo[MAX_PCI_DEVICES] = {{0}};
-static ibool            useV86 = false;
-static ibool            forcePost = false;
-
-/* Length of the BIOS image */
-
-#define MAX_BIOSLEN         (64 * 1024L)
-#define FINAL_BIOSLEN       (32 * 1024L)
-
-/* Macro to determine if the VGA is enabled and responding */
-
-#define VGA_NOT_ACTIVE()    (forcePost || (PM_inpb(0x3CC) == 0xFF) || ((PM_inpb(0x3CC) & 0x2) == 0))
-
-#define ENABLE_DEVICE(device)   \
-    PCI_writePCIRegB(0x4,PCI[DeviceIndex[device]].Command | 0x7,device)
-
-#define DISABLE_DEVICE(device)  \
-    PCI_writePCIRegB(0x4,0,device)
-
-/* Macros to enable and disable AGP VGA resources */
-
-#define ENABLE_AGP_VGA()    \
-    PCI_accessReg(0x3E,AGPBridge->BridgeControl | 0x8,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-#define DISABLE_AGP_VGA()   \
-    PCI_accessReg(0x3E,AGPBridge->BridgeControl & ~0x8,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-#define RESTORE_AGP_VGA()   \
-    PCI_accessReg(0x3E,AGPBridge->BridgeControl,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-RETURNS:
-The address to use to map the secondary BIOS (PCI/AGP devices)
-
-REMARKS:
-Searches all the PCI base address registers for the device looking for a
-memory mapping that is large enough to hold our ROM BIOS. We usually end up
-finding the framebuffer mapping (usually BAR 0x10), and we use this mapping
-to map the BIOS for the device into. We use a mapping that is already
-assigned to the device to ensure the memory range will be passed through
-by any PCI->PCI or AGP->PCI bridge that may be present.
-
-NOTE: Usually this function is only used for AGP devices, but it may be
-      used for PCI devices that have already been POST'ed and the BIOS
-      ROM base address has been zero'ed out.
-****************************************************************************/
-static ulong PCI_findBIOSAddr(
-    int device)
-{
-    ulong   base,size;
-    int     bar;
-
-    for (bar = 0x10; bar <= 0x14; bar++) {
-	base = PCI_readPCIRegL(bar,device) & ~0xFF;
-	if (!(base & 0x1)) {
-	    PCI_writePCIRegL(bar,0xFFFFFFFF,device);
-	    size = PCI_readPCIRegL(bar,device) & ~0xFF;
-	    size = ~size+1;
-	    PCI_writePCIRegL(bar,0,device);
-	    if (size >= MAX_BIOSLEN)
-		return base;
-	    }
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Re-writes the PCI base address registers for the secondary PCI controller
-with the values from our initial PCI bus enumeration. This fixes up the
-values after we have POST'ed the secondary display controller BIOS, which
-may have incorrectly re-programmed the base registers the same as the
-primary display controller (the case for identical S3 cards).
-****************************************************************************/
-static void _PCI_fixupSecondaryBARs(void)
-{
-    int i;
-
-    for (i = 0; i < NumDevices; i++) {
-	PCI_writePCIRegL(0x10,PCI[DeviceIndex[i]].BaseAddress10,i);
-	PCI_writePCIRegL(0x14,PCI[DeviceIndex[i]].BaseAddress14,i);
-	PCI_writePCIRegL(0x18,PCI[DeviceIndex[i]].BaseAddress18,i);
-	PCI_writePCIRegL(0x1C,PCI[DeviceIndex[i]].BaseAddress1C,i);
-	PCI_writePCIRegL(0x20,PCI[DeviceIndex[i]].BaseAddress20,i);
-	PCI_writePCIRegL(0x24,PCI[DeviceIndex[i]].BaseAddress24,i);
-	}
-}
-
-/****************************************************************************
-RETURNS:
-True if successfully initialised, false if not.
-
-REMARKS:
-This function executes the BIOS POST code on the controller. We assume that
-at this stage the controller has its I/O and memory space enabled and
-that all other controllers are in a disabled state.
-****************************************************************************/
-static void PCI_doBIOSPOST(
-    int device,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    RMREGS          regs;
-    RMSREGS         sregs;
-
-    /* Determine the value to store in AX for BIOS POST */
-    regs.x.ax = (u16)(PCI[DeviceIndex[device]].slot.i >> 8);
-    if (useV86) {
-	/* Post the BIOS using the PM functions (ie: v86 mode on Linux) */
-	if (!PM_doBIOSPOST(regs.x.ax,BIOSPhysAddr,mappedBIOS,BIOSLen)) {
-	    /* If the PM function fails, this probably means are we are on */
-	    /* DOS and can't re-map the real mode 0xC0000 region. In thise */
-	    /* case if the device is the primary, we can use the real */
-	    /* BIOS at 0xC0000 directly. */
-	    if (device == 0)
-		PM_doBIOSPOST(regs.x.ax,0xC0000,mappedBIOS,BIOSLen);
-	    }
-	}
-    else {
-	/* Setup the X86 emulator for the VGA BIOS */
-	BE_setVGA(&VGAInfo[device]);
-
-	/* Execute the BIOS POST code */
-	BE_callRealMode(0xC000,0x0003,&regs,&sregs);
-
-	/* Cleanup and exit */
-	BE_getVGA(&VGAInfo[device]);
-	}
-}
-
-/****************************************************************************
-RETURNS:
-True if successfully initialised, false if not.
-
-REMARKS:
-Loads and POST's the secondary controllers BIOS, directly from the BIOS
-image we can extract over the PCI bus.
-****************************************************************************/
-static ibool PCI_postControllers(void)
-{
-    int     device;
-    ulong   BIOSImageLen,mappedBIOSPhys;
-    uchar   *mappedBIOS,*copyOfBIOS;
-    char    filename[_MAX_PATH];
-    FILE    *f;
-
-    /* Disable the primary display controller and AGP VGA pass-through */
-    DISABLE_DEVICE(0);
-    if (AGPBridge)
-	DISABLE_AGP_VGA();
-
-    /* Now POST all the secondary controllers */
-    for (device = 0; device < NumDevices; device++) {
-	/* Skip the device if it is not enabled (probably an ISA device) */
-	if (DeviceIndex[device] == -1)
-	    continue;
-
-	/* Enable secondary display controller. If the secondary controller */
-	/* is on the AGP bus, then enable VGA resources for the AGP device. */
-	ENABLE_DEVICE(device);
-	if (AGPBridge && AGPBridge->SecondayBusNumber == PCI[DeviceIndex[device]].slot.p.Bus)
-	    ENABLE_AGP_VGA();
-
-	/* Check if the controller has already been POST'ed */
-	if (VGA_NOT_ACTIVE()) {
-	    /* Find a viable place to map the secondary PCI BIOS image and map it */
-	    printk("Device %d not enabled, so attempting warm boot it\n", device);
-
-	    /* For AGP devices (and PCI devices that do have the ROM base */
-	    /* address zero'ed out) we have to map the BIOS to a location */
-	    /* that is passed by the AGP bridge to the bus. Some AGP devices */
-	    /* have the ROM base address already set up for us, and some */
-	    /* do not (we map to one of the existing BAR locations in */
-	    /* this case). */
-	    mappedBIOS = NULL;
-	    if (PCI[DeviceIndex[device]].ROMBaseAddress != 0)
-		mappedBIOSPhys = PCI[DeviceIndex[device]].ROMBaseAddress & ~0xF;
-	    else
-		mappedBIOSPhys = PCI_findBIOSAddr(device);
-	    printk("Mapping BIOS image to 0x%08X\n", mappedBIOSPhys);
-	    mappedBIOS = PM_mapPhysicalAddr(mappedBIOSPhys,MAX_BIOSLEN-1,false);
-	    PCI_writePCIRegL(0x30,mappedBIOSPhys | 0x1,device);
-	    BIOSImageLen = mappedBIOS[2] * 512;
-	    if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL)
-		return false;
-	    memcpy(copyOfBIOS,mappedBIOS,BIOSImageLen);
-	    PM_freePhysicalAddr(mappedBIOS,MAX_BIOSLEN-1);
-
-	    /* Allocate memory to store copy of BIOS from secondary controllers */
-	    VGAInfo[device].pciInfo = &PCI[DeviceIndex[device]];
-	    VGAInfo[device].BIOSImage = copyOfBIOS;
-	    VGAInfo[device].BIOSImageLen = BIOSImageLen;
-
-	    /* Restore device mappings */
-	    PCI_writePCIRegL(0x30,PCI[DeviceIndex[device]].ROMBaseAddress,device);
-	    PCI_writePCIRegL(0x10,PCI[DeviceIndex[device]].BaseAddress10,device);
-	    PCI_writePCIRegL(0x14,PCI[DeviceIndex[device]].BaseAddress14,device);
-
-	    /* Now execute the BIOS POST for the device */
-	    if (copyOfBIOS[0] == 0x55 && copyOfBIOS[1] == 0xAA) {
-		printk("Executing BIOS POST for controller.\n");
-		PCI_doBIOSPOST(device,mappedBIOSPhys,copyOfBIOS,BIOSImageLen);
-		}
-
-	    /* Reset the size of the BIOS image to the final size */
-	    VGAInfo[device].BIOSImageLen = FINAL_BIOSLEN;
-
-	    /* Save the BIOS and interrupt vector information to disk */
-	    sprintf(filename,"%s/bios.%02d",PM_getNucleusConfigPath(),device);
-	    if ((f = fopen(filename,"wb")) != NULL) {
-		fwrite(copyOfBIOS,1,FINAL_BIOSLEN,f);
-		fwrite(VGAInfo[device].LowMem,1,sizeof(VGAInfo[device].LowMem),f);
-		fclose(f);
-		}
-	    }
-	else {
-	    /* Allocate memory to store copy of BIOS from secondary controllers */
-	    if ((copyOfBIOS = malloc(FINAL_BIOSLEN)) == NULL)
-		return false;
-	    VGAInfo[device].pciInfo = &PCI[DeviceIndex[device]];
-	    VGAInfo[device].BIOSImage = copyOfBIOS;
-	    VGAInfo[device].BIOSImageLen = FINAL_BIOSLEN;
-
-	    /* Load the BIOS and interrupt vector information from disk */
-	    sprintf(filename,"%s/bios.%02d",PM_getNucleusConfigPath(),device);
-	    if ((f = fopen(filename,"rb")) != NULL) {
-		fread(copyOfBIOS,1,FINAL_BIOSLEN,f);
-		fread(VGAInfo[device].LowMem,1,sizeof(VGAInfo[device].LowMem),f);
-		fclose(f);
-		}
-	    }
-
-	/* Fix up all the secondary PCI base address registers */
-	/* (restores them all from the values we read previously) */
-	_PCI_fixupSecondaryBARs();
-
-	/* Disable the secondary controller and AGP VGA pass-through */
-	DISABLE_DEVICE(device);
-	if (AGPBridge)
-	    DISABLE_AGP_VGA();
-	}
-
-    /* Reenable primary display controller and reset AGP bridge control */
-    if (AGPBridge)
-	RESTORE_AGP_VGA();
-    ENABLE_DEVICE(0);
-
-    /* Free physical BIOS image mapping */
-    PM_freePhysicalAddr(mappedBIOS,MAX_BIOSLEN-1);
-
-    /* Restore the X86 emulator BIOS info to primary controller */
-    if (!useV86)
-	BE_setVGA(&VGAInfo[0]);
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Enumerates the PCI bus and dumps the PCI configuration information to the
-log file.
-****************************************************************************/
-static void EnumeratePCI(void)
-{
-    int             i,index;
-    PCIBridgeInfo   *info;
-
-    printk("Displaying enumeration of PCI bus (%d devices, %d display devices)\n",
-	NumPCI, NumDevices);
-    for (index = 0; index < NumDevices; index++)
-	printk("  Display device %d is PCI device %d\n",index,DeviceIndex[index]);
-    printk("\n");
-    printk("Bus Slot Fnc DeviceID  SubSystem Rev Class IRQ Int Cmd\n");
-    for (i = 0; i < NumPCI; i++) {
-	printk("%2d   %2d  %2d  %04X:%04X %04X:%04X %02X  %02X:%02X %02X  %02X  %04X   ",
-	    PCI[i].slot.p.Bus,
-	    PCI[i].slot.p.Device,
-	    PCI[i].slot.p.Function,
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].SubSystemVendorID,
-	    PCI[i].SubSystemID,
-	    PCI[i].RevID,
-	    PCI[i].BaseClass,
-	    PCI[i].SubClass,
-	    PCI[i].InterruptLine,
-	    PCI[i].InterruptPin,
-	    PCI[i].Command);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printk("<- %d\n", index);
-	else
-	    printk("\n");
-	}
-    printk("\n");
-    printk("DeviceID  Stat Ifc Cch Lat Hdr BIST\n");
-    for (i = 0; i < NumPCI; i++) {
-	printk("%04X:%04X %04X  %02X  %02X  %02X  %02X  %02X   ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].Status,
-	    PCI[i].Interface,
-	    PCI[i].CacheLineSize,
-	    PCI[i].LatencyTimer,
-	    PCI[i].HeaderType,
-	    PCI[i].BIST);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printk("<- %d\n", index);
-	else
-	    printk("\n");
-	}
-    printk("\n");
-    printk("DeviceID  Base10h  Base14h  Base18h  Base1Ch  Base20h  Base24h  ROMBase\n");
-    for (i = 0; i < NumPCI; i++) {
-	printk("%04X:%04X %08X %08X %08X %08X %08X %08X %08X ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].BaseAddress10,
-	    PCI[i].BaseAddress14,
-	    PCI[i].BaseAddress18,
-	    PCI[i].BaseAddress1C,
-	    PCI[i].BaseAddress20,
-	    PCI[i].BaseAddress24,
-	    PCI[i].ROMBaseAddress);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printk("<- %d\n", index);
-	else
-	    printk("\n");
-	}
-    printk("\n");
-    printk("DeviceID  BAR10Len BAR14Len BAR18Len BAR1CLen BAR20Len BAR24Len ROMLen\n");
-    for (i = 0; i < NumPCI; i++) {
-	printk("%04X:%04X %08X %08X %08X %08X %08X %08X %08X ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].BaseAddress10Len,
-	    PCI[i].BaseAddress14Len,
-	    PCI[i].BaseAddress18Len,
-	    PCI[i].BaseAddress1CLen,
-	    PCI[i].BaseAddress20Len,
-	    PCI[i].BaseAddress24Len,
-	    PCI[i].ROMBaseAddressLen);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printk("<- %d\n", index);
-	else
-	    printk("\n");
-	}
-    printk("\n");
-    printk("Displaying enumeration of %d bridge devices\n",NumBridges);
-    printk("\n");
-    printk("DeviceID  P# S# B# IOB  IOL  MemBase  MemLimit PreBase  PreLimit Ctrl\n");
-    for (i = 0; i < NumBridges; i++) {
-	info = (PCIBridgeInfo*)&PCI[BridgeIndex[i]];
-	printk("%04X:%04X %02X %02X %02X %04X %04X %08X %08X %08X %08X %04X\n",
-	    info->VendorID,
-	    info->DeviceID,
-	    info->PrimaryBusNumber,
-	    info->SecondayBusNumber,
-	    info->SubordinateBusNumber,
-	    ((u16)info->IOBase << 8) & 0xF000,
-	    info->IOLimit ?
-		((u16)info->IOLimit << 8) | 0xFFF : 0,
-	    ((u32)info->MemoryBase << 16) & 0xFFF00000,
-	    info->MemoryLimit ?
-		((u32)info->MemoryLimit << 16) | 0xFFFFF : 0,
-	    ((u32)info->PrefetchableMemoryBase << 16) & 0xFFF00000,
-	    info->PrefetchableMemoryLimit ?
-		((u32)info->PrefetchableMemoryLimit << 16) | 0xFFFFF : 0,
-	    info->BridgeControl);
-	}
-    printk("\n");
-}
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
-    int             i,j;
-    PCIBridgeInfo   *info;
-
-    /* If this is the first time we have been called, enumerate all */
-    /* devices on the PCI bus. */
-    if (NumPCI == -1) {
-	for (i = 0; i < MAX_PCI_DEVICES; i++)
-	    PCI[i].dwSize = sizeof(PCI[i]);
-	if ((NumPCI = PCI_enumerate(PCI,MAX_PCI_DEVICES)) == 0)
-	    return -1;
-
-	/* Build a list of all PCI bridge devices */
-	for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI[i].BaseClass == PCI_BRIDGE_CLASS) {
-		if (NumBridges < MAX_PCI_DEVICES)
-		    BridgeIndex[NumBridges++] = i;
-		}
-	    }
-
-	/* Now build a list of all display class devices */
-	for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
-		if ((PCI[i].Command & 0x3) == 0x3) {
-		    DeviceIndex[0] = i;
-		    }
-		else {
-		    if (NumDevices < MAX_PCI_DEVICES)
-			DeviceIndex[NumDevices++] = i;
-		    }
-		if (PCI[i].slot.p.Bus != 0) {
-		    /* This device is on a different bus than the primary */
-		    /* PCI bus, so it is probably an AGP device. Find the */
-		    /* AGP bus device that controls that bus so we can */
-		    /* control it. */
-		    for (j = 0; j < NumBridges; j++) {
-			info = (PCIBridgeInfo*)&PCI[BridgeIndex[j]];
-			if (info->SecondayBusNumber == PCI[i].slot.p.Bus) {
-			    AGPBridge = info;
-			    break;
-			    }
-			}
-		    }
-		}
-	    }
-
-	/* Enumerate all PCI and bridge devices to log file */
-	EnumeratePCI();
-	}
-    return NumDevices;
-}
-
-FILE *logfile;
-
-void printk(const char *fmt, ...)
-{
-    va_list argptr;
-    va_start(argptr, fmt);
-    vfprintf(logfile, fmt, argptr);
-    fflush(logfile);
-    va_end(argptr);
-}
-
-int main(int argc,char *argv[])
-{
-    while (argc > 1) {
-	if (stricmp(argv[1],"-usev86") == 0) {
-	    useV86 = true;
-	    }
-	else if (stricmp(argv[1],"-force") == 0) {
-	    forcePost = true;
-	    }
-#ifdef  DEBUG
-	else if (stricmp(argv[1],"-decode") == 0) {
-	    debugFlags |= DEBUG_DECODE_F;
-	    }
-	else if (stricmp(argv[1],"-iotrace") == 0) {
-	    debugFlags |= DEBUG_IO_TRACE_F;
-	    }
-#endif
-	else {
-	    printf("Usage: warmboot [-usev86] [-force] [-decode] [-iotrace]\n");
-	    exit(-1);
-	    }
-	argc--;
-	argv++;
-	}
-    if ((logfile = fopen("warmboot.log","w")) == NULL)
-	exit(1);
-
-    PM_init();
-    if (!useV86) {
-	/* Initialise the x86 BIOS emulator */
-	BE_init(false,debugFlags,65536,&VGAInfo[0]);
-	}
-
-    /* Enumerate all devices (which POST's them at the same time) */
-    if (PCI_enumerateDevices() < 1) {
-	printk("No PCI display devices found!\n");
-	return -1;
-	}
-
-    /* Post all the display controller BIOS'es */
-    PCI_postControllers();
-
-    /* Cleanup and exit the emulator */
-    if (!useV86)
-	BE_exit();
-    fclose(logfile);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm
deleted file mode 100644
index 61a9024ab3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm
+++ /dev/null
@@ -1,51 +0,0 @@
-;****************************************************************************
-;*
-;*                     SciTech Nucleus Audio Architecture
-;*
-;*               Copyright (C) 1991-1998 SciTech Software, Inc.
-;*                            All rights reserved.
-;*
-;*  ======================================================================
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  |                                                                    |
-;*  |This copyrighted computer code contains proprietary technology      |
-;*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-;*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-;*  |                                                                    |
-;*  |The contents of this file are subject to the SciTech Nucleus        |
-;*  |License; you may *not* use this file or related software except in  |
-;*  |compliance with the License. You may obtain a copy of the License   |
-;*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-;*  |                                                                    |
-;*  |Software distributed under the License is distributed on an         |
-;*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-;*  |implied. See the License for the specific language governing        |
-;*  |rights and limitations under the License.                           |
-;*  |                                                                    |
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  ======================================================================
-;*
-;* Language:    TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the Nucleus
-;*              Audio API functions for Intel binary compatible drivers.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-BEGIN_IMPORTS_DEF   _AA_exports
-SKIP_IMP    AA_status                     ; Implemented in C code
-SKIP_IMP    AA_errorMsg                   ; Implemented in C code
-SKIP_IMP    AA_getDaysLeft                ; Implemented in C code
-SKIP_IMP    AA_registerLicense            ; Implemented in C code
-SKIP_IMP    AA_enumerateDevices           ; Implemented in C code
-SKIP_IMP    AA_loadDriver                 ; Implemented in C code
-DECLARE_IMP AA_unloadDriver
-DECLARE_IMP AA_saveOptions
-END_IMPORTS_DEF
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm
deleted file mode 100644
index 5317600438..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm
+++ /dev/null
@@ -1,136 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech Nucleus Graphics Architecture
-;*
-;*               Copyright (C) 1991-1998 SciTech Software, Inc.
-;*                            All rights reserved.
-;*
-;*  ======================================================================
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  |                                                                    |
-;*  |This copyrighted computer code contains proprietary technology      |
-;*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-;*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-;*  |                                                                    |
-;*  |The contents of this file are subject to the SciTech Nucleus        |
-;*  |License; you may *not* use this file or related software except in  |
-;*  |compliance with the License. You may obtain a copy of the License   |
-;*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-;*  |                                                                    |
-;*  |Software distributed under the License is distributed on an         |
-;*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-;*  |implied. See the License for the specific language governing        |
-;*  |rights and limitations under the License.                           |
-;*  |                                                                    |
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  ======================================================================
-;*
-;* Language:    TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the Nucleus
-;*              Graphics API functions for Intel binary compatible drivers.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-BEGIN_IMPORTS_DEF   __GA_exports
-SKIP_IMP    GA_status,0                     ; Implemented in C code
-SKIP_IMP    GA_errorMsg,1                   ; Implemented in C code
-SKIP_IMP    GA_getDaysLeft,1                ; Implemented in C code
-SKIP_IMP    GA_registerLicense,2            ; Implemented in C code
-SKIP_IMP    GA_enumerateDevices,1           ; Implemented in C code
-SKIP_IMP    GA_loadDriver,2                 ; Implemented in C code
-DECLARE_IMP GA_setActiveDevice,1
-SKIP_IMP    GA_reserved1,0                  ; Implemented in C code
-DECLARE_IMP GA_unloadDriver,1
-DECLARE_IMP REF2D_loadDriver,6
-DECLARE_IMP REF2D_unloadDriver,2
-DECLARE_IMP GA_loadRef2d,5
-DECLARE_IMP GA_unloadRef2d,1
-DECLARE_IMP GA_softStereoInit,1
-DECLARE_IMP GA_softStereoOn,0
-DECLARE_IMP GA_softStereoScheduleFlip,2
-DECLARE_IMP GA_softStereoGetFlipStatus,0
-DECLARE_IMP GA_softStereoWaitTillFlipped,0
-DECLARE_IMP GA_softStereoOff,0
-DECLARE_IMP GA_softStereoExit,0
-DECLARE_IMP GA_saveModeProfile,2
-DECLARE_IMP GA_saveOptions,2
-DECLARE_IMP GA_saveCRTCTimings,1
-DECLARE_IMP GA_restoreCRTCTimings,1
-DECLARE_IMP DDC_init,1
-DECLARE_IMP DDC_readEDID,5
-DECLARE_IMP EDID_parse,3
-DECLARE_IMP MCS_begin,1
-DECLARE_IMP MCS_getCapabilitiesString,2
-DECLARE_IMP MCS_isControlSupported,1
-DECLARE_IMP MCS_enableControl,2
-DECLARE_IMP MCS_getControlMax,2
-DECLARE_IMP MCS_getControlValue,2
-DECLARE_IMP MCS_getControlValues,3
-DECLARE_IMP MCS_setControlValue,2
-DECLARE_IMP MCS_setControlValues,3
-DECLARE_IMP MCS_resetControl,1
-DECLARE_IMP MCS_saveCurrentSettings,0
-DECLARE_IMP MCS_getTimingReport,3
-DECLARE_IMP MCS_getSelfTestReport,3
-DECLARE_IMP MCS_end,0
-SKIP_IMP    GA_loadInGUI,1                  ; Implemented in C code
-DECLARE_IMP DDC_writeEDID,6
-DECLARE_IMP GA_useDoubleScan,1
-DECLARE_IMP GA_getMaxRefreshRate,4
-DECLARE_IMP GA_computeCRTCTimings,6
-DECLARE_IMP GA_addMode,5
-DECLARE_IMP GA_addRefresh,5
-DECLARE_IMP GA_delMode,5
-DECLARE_IMP N_getLogName,0
-SKIP_IMP2   N_log
-DECLARE_IMP MDBX_getErrCode,0
-DECLARE_IMP MDBX_getErrorMsg,0
-DECLARE_IMP MDBX_open,1
-DECLARE_IMP MDBX_close,0
-DECLARE_IMP MDBX_first,1
-DECLARE_IMP MDBX_last,1
-DECLARE_IMP MDBX_next,1
-DECLARE_IMP MDBX_prev,1
-DECLARE_IMP MDBX_insert,1
-DECLARE_IMP MDBX_update,1
-DECLARE_IMP MDBX_flush,0
-DECLARE_IMP MDBX_importINF,2
-SKIP_IMP    GA_getGlobalOptions,2           ; Implemented in C code
-DECLARE_IMP GA_setGlobalOptions,1
-DECLARE_IMP GA_saveGlobalOptions,1
-DECLARE_IMP GA_getInternalName,1
-DECLARE_IMP GA_getNucleusConfigPath,0
-DECLARE_IMP GA_getFakePCIID,0
-SKIP_IMP    GA_loadLibrary,3                ; Implemented in C code
-SKIP_IMP    GA_isOEMVersion,1               ; Implemented in C code
-DECLARE_IMP GA_isLiteVersion,1
-DECLARE_IMP GA_getDisplaySerialNo,1
-DECLARE_IMP GA_getDisplayUserName,1
-SKIP_IMP    GA_getCurrentDriver,1           ; Implemented in C code
-SKIP_IMP    GA_getCurrentRef2d,1            ; Implemented in C code
-SKIP_IMP    GA_getLicensedDevices,1         ; Implemented in C code
-DECLARE_IMP DDC_initExt,2
-DECLARE_IMP MCS_beginExt,2
-DECLARE_IMP GA_loadRegionMgr,3
-DECLARE_IMP GA_unloadRegionMgr,1
-DECLARE_IMP GA_getProcAddress,2
-DECLARE_IMP GA_enableVBEMode,5
-DECLARE_IMP GA_disableVBEMode,5
-DECLARE_IMP GA_loadModeProfile,2
-DECLARE_IMP GA_getCRTCTimings,4
-DECLARE_IMP GA_setCRTCTimings,4
-DECLARE_IMP GA_setDefaultRefresh,6
-DECLARE_IMP GA_saveMonitorInfo,2
-DECLARE_IMP GA_detectPnPMonitor,3
-SKIP_IMP3   GA_queryFunctions
-SKIP_IMP3   REF2D_queryFunctions
-END_IMPORTS_DEF
-
-        END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm b/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm
deleted file mode 100644
index 0194a62f98..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm
+++ /dev/null
@@ -1,248 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech Nucleus Graphics Architecture
-;*
-;*               Copyright (C) 1991-1998 SciTech Software, Inc.
-;*                            All rights reserved.
-;*
-;*  ======================================================================
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  |                                                                    |
-;*  |This copyrighted computer code contains proprietary technology      |
-;*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-;*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-;*  |                                                                    |
-;*  |The contents of this file are subject to the SciTech Nucleus        |
-;*  |License; you may *not* use this file or related software except in  |
-;*  |compliance with the License. You may obtain a copy of the License   |
-;*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-;*  |                                                                    |
-;*  |Software distributed under the License is distributed on an         |
-;*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-;*  |implied. See the License for the specific language governing        |
-;*  |rights and limitations under the License.                           |
-;*  |                                                                    |
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  ======================================================================
-;*
-;* Language:    80386 Assembler, NASM or TASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Assembly support functions for the Nucleus library for
-;*              the high resolution timing support functions provided by
-;*              the Intel Pentium and compatible processors.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header  _gatimer
-
-begcodeseg  _gatimer
-
-ifdef   USE_NASM
-%macro mCPU_ID 0
-db  00Fh,0A2h
-%endmacro
-else
-MACRO   mCPU_ID
-db  00Fh,0A2h
-ENDM
-endif
-
-ifdef   USE_NASM
-%macro mRDTSC 0
-db  00Fh,031h
-%endmacro
-else
-MACRO   mRDTSC
-db  00Fh,031h
-ENDM
-endif
-
-;----------------------------------------------------------------------------
-; bool _GA_haveCPUID(void)
-;----------------------------------------------------------------------------
-; Determines if we have support for the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _GA_haveCPUID
-
-        enter_c
-        pushfd                      ; Get original EFLAGS
-        pop     eax
-        mov     ecx, eax
-        xor     eax, 200000h        ; Flip ID bit in EFLAGS
-        push    eax                 ; Save new EFLAGS value on stack
-        popfd                       ; Replace current EFLAGS value
-        pushfd                      ; Get new EFLAGS
-        pop     eax                 ; Store new EFLAGS in EAX
-        xor     eax, ecx            ; Can not toggle ID bit,
-        jnz     @@1                 ; Processor=80486
-        mov     eax,0               ; We dont have CPUID support
-        jmp     @@Done
-@@1:    mov     eax,1               ; We have CPUID support
-@@Done: leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _GA_getCPUIDFeatures(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _GA_getCPUIDFeatures
-
-        enter_c
-
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax, 1              ; Make sure 1 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        xor     eax, eax
-        inc     eax
-        mCPU_ID                     ; Get family/model/stepping/features
-        mov     eax, edx
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void  _GA_readTimeStamp(GA_largeInteger *time)
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the 64-bit result.
-;----------------------------------------------------------------------------
-cprocstart  _GA_readTimeStamp
-
-        mRDTSC
-        mov     ecx,[esp+4]     ; Access directly without stack frame
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; N_uint32 GA_TimerDifference(GA_largeInteger *a,GA_largeInteger *b)
-;----------------------------------------------------------------------------
-; Computes the difference between two 64-bit numbers (a-b)
-;----------------------------------------------------------------------------
-cprocstart  GA_TimerDifference
-
-        ARG     a:DPTR, b:DPTR, t:DPTR
-
-        enter_c
-
-        mov     ecx,[a]
-        mov     eax,[ecx]       ; EAX := b.low
-        mov     ecx,[b]
-        sub     eax,[ecx]
-        mov     edx,eax         ; EDX := low difference
-        mov     ecx,[a]
-        mov     eax,[ecx+4]     ; ECX := b.high
-        mov     ecx,[b]
-        sbb     eax,[ecx+4]     ; EAX := high difference
-        mov     eax,edx         ; Return low part
-
-        leave_c
-        ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY_TIMER 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-else
-macro   DELAY_TIMER
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-endif
-
-;----------------------------------------------------------------------------
-; void _OS_delay8253(N_uint32 microSeconds);
-;----------------------------------------------------------------------------
-; Delays for the specified number of microseconds, by directly programming
-; the 8253 timer chips.
-;----------------------------------------------------------------------------
-cprocstart  _OS_delay8253
-
-        ARG     microSec:UINT
-
-        enter_c
-
-; Start timer 2 counting
-
-        mov     _ax,[microSec]      ; EAX := count in microseconds
-        mov     ecx,1196
-        mul     ecx
-        mov     ecx,1000
-        div     ecx
-        mov     ecx,eax             ; ECX := count in timer ticks
-        in      al,61h
-        or      al,1
-        out     61h,al
-
-; Set the timer 2 count to 0 again to start the timing interval.
-
-        mov     al,10110100b        ; set up to load initial (timer 2)
-        out     43h,al              ; timer count
-        DELAY_TIMER
-        sub     al,al
-        out     42h,al              ; load count lsb
-        DELAY_TIMER
-        out     42h,al              ; load count msb
-        xor     di,di               ; Allow max 64K loop iterations
-
-@@LoopStart:
-        dec     di                  ; This is a guard against the possibility that
-        jz      @@LoopEnd           ; someone eg. stopped the timer behind our back.
-                                    ; After 64K iterations we bail out no matter what
-                                    ; (and hope it wasn't too soon)
-        mov     al,00000000b        ; latch timer 0
-        out     43h,al
-        DELAY_TIMER
-        in      al,42h              ; least significant byte
-        DELAY_TIMER
-        mov     ah,al
-        in      al,42h              ; most significant byte
-        xchg    ah,al
-        neg     ax                  ; Convert from countdown remaining
-                                    ;  to elapsed count
-        cmp     ax,cx               ; Has delay expired?
-        jb      @@LoopStart         ; No, so loop till done
-
-; Stop timer 2 from counting
-@@LoopEnd:
-        in      al,61H
-        and     al,0FEh
-        out     61H,al
-
-; Some programs have a problem if we change the control port; better change it
-; to something they expect (mode 3 - square wave generator)...
-        mov     al,0B6h
-        out     43h,al
-
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _gatimer
-
-        END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm
deleted file mode 100644
index d4b11790af..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm
+++ /dev/null
@@ -1,195 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*               Copyright (C) 1991-1998 SciTech Software, Inc.
-;*                            All rights reserved.
-;*
-;*  ======================================================================
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  |                                                                    |
-;*  |This copyrighted computer code contains proprietary technology      |
-;*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-;*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-;*  |                                                                    |
-;*  |The contents of this file are subject to the SciTech Nucleus        |
-;*  |License; you may *not* use this file or related software except in  |
-;*  |compliance with the License. You may obtain a copy of the License   |
-;*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-;*  |                                                                    |
-;*  |Software distributed under the License is distributed on an         |
-;*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-;*  |implied. See the License for the specific language governing        |
-;*  |rights and limitations under the License.                           |
-;*  |                                                                    |
-;*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;*  ======================================================================
-;*
-;* Language:    TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the PM
-;*              API functions for Intel binary portable drivers.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-BEGIN_IMPORTS_DEF   _PM_imports
-DECLARE_IMP PM_getModeType,0
-DECLARE_IMP PM_getBIOSPointer,0
-DECLARE_IMP PM_getA0000Pointer,0
-DECLARE_IMP PM_mapPhysicalAddr,0
-DECLARE_IMP PM_mallocShared,0
-SKIP_IMP    _PM_reserved1,0
-DECLARE_IMP PM_freeShared,0
-DECLARE_IMP PM_mapToProcess,0
-DECLARE_IMP PM_mapRealPointer,0
-DECLARE_IMP PM_allocRealSeg,0
-DECLARE_IMP PM_freeRealSeg,0
-DECLARE_IMP PM_allocLockedMem,0
-DECLARE_IMP PM_freeLockedMem,0
-DECLARE_IMP PM_callRealMode,0
-DECLARE_IMP PM_int86,0
-DECLARE_IMP PM_int86x,0
-DECLARE_IMP DPMI_int86,0
-DECLARE_IMP PM_availableMemory,0
-DECLARE_IMP PM_getVESABuf,0
-DECLARE_IMP PM_getOSType,0
-DECLARE_IMP PM_fatalError,0
-DECLARE_IMP PM_setBankA,0
-DECLARE_IMP PM_setBankAB,0
-DECLARE_IMP PM_setCRTStart,0
-DECLARE_IMP PM_getCurrentPat,0
-DECLARE_IMP PM_getVBEAFPath,0
-DECLARE_IMP PM_getNucleusPath,0
-DECLARE_IMP PM_getNucleusConfigPath,0
-DECLARE_IMP PM_getUniqueID,0
-DECLARE_IMP PM_getMachineName,0
-DECLARE_IMP VF_available,0
-DECLARE_IMP VF_init,0
-DECLARE_IMP VF_exit,0
-DECLARE_IMP PM_openConsole,0
-DECLARE_IMP PM_getConsoleStateSize,0
-DECLARE_IMP PM_saveConsoleState,0
-DECLARE_IMP PM_restoreConsoleState,0
-DECLARE_IMP PM_closeConsole,0
-DECLARE_IMP PM_setOSCursorLocation,0
-DECLARE_IMP PM_setOSScreenWidth,0
-DECLARE_IMP PM_enableWriteCombine,0
-DECLARE_IMP PM_backslash,0
-DECLARE_IMP PM_lockDataPages,0
-DECLARE_IMP PM_unlockDataPages,0
-DECLARE_IMP PM_lockCodePages,0
-DECLARE_IMP PM_unlockCodePages,0
-DECLARE_IMP PM_setRealTimeClockHandler,0
-DECLARE_IMP PM_setRealTimeClockFrequency,0
-DECLARE_IMP PM_restoreRealTimeClockHandler,0
-DECLARE_IMP PM_doBIOSPOST,0
-DECLARE_IMP PM_getBootDrive,0
-DECLARE_IMP PM_freePhysicalAddr,0
-DECLARE_IMP PM_inpb,0
-DECLARE_IMP PM_inpw,0
-DECLARE_IMP PM_inpd,0
-DECLARE_IMP PM_outpb,0
-DECLARE_IMP PM_outpw,0
-DECLARE_IMP PM_outpd,0
-SKIP_IMP    _PM_reserved2,0
-DECLARE_IMP PM_setSuspendAppCallback,0
-DECLARE_IMP PM_haveBIOSAccess,0
-DECLARE_IMP PM_kbhit,0
-DECLARE_IMP PM_getch,0
-DECLARE_IMP PM_findBPD,0
-DECLARE_IMP PM_getPhysicalAddr,0
-DECLARE_IMP PM_sleep,0
-DECLARE_IMP PM_getCOMPort,0
-DECLARE_IMP PM_getLPTPort,0
-DECLARE_IMP PM_loadLibrary,0
-DECLARE_IMP PM_getProcAddress,0
-DECLARE_IMP PM_freeLibrary,0
-DECLARE_IMP PCI_enumerate,0
-DECLARE_IMP PCI_accessReg,0
-DECLARE_IMP PCI_setHardwareIRQ,0
-DECLARE_IMP PCI_generateSpecialCyle,0
-SKIP_IMP    _PM_reserved3,0
-DECLARE_IMP PCIBIOS_getEntry,0
-DECLARE_IMP CPU_getProcessorType,0
-DECLARE_IMP CPU_haveMMX,0
-DECLARE_IMP CPU_have3DNow,0
-DECLARE_IMP CPU_haveSSE,0
-DECLARE_IMP CPU_haveRDTSC,0
-DECLARE_IMP CPU_getProcessorSpeed,0
-DECLARE_IMP ZTimerInit,0
-DECLARE_IMP LZTimerOn,0
-DECLARE_IMP LZTimerLap,0
-DECLARE_IMP LZTimerOff,0
-DECLARE_IMP LZTimerCount,0
-DECLARE_IMP LZTimerOnExt,0
-DECLARE_IMP LZTimerLapExt,0
-DECLARE_IMP LZTimerOffExt,0
-DECLARE_IMP LZTimerCountExt,0
-DECLARE_IMP ULZTimerOn,0
-DECLARE_IMP ULZTimerLap,0
-DECLARE_IMP ULZTimerOff,0
-DECLARE_IMP ULZTimerCount,0
-DECLARE_IMP ULZReadTime,0
-DECLARE_IMP ULZElapsedTime,0
-DECLARE_IMP ULZTimerResolution,0
-DECLARE_IMP PM_findFirstFile,0
-DECLARE_IMP PM_findNextFile,0
-DECLARE_IMP PM_findClose,0
-DECLARE_IMP PM_makepath,0
-DECLARE_IMP PM_splitpath,0
-DECLARE_IMP PM_driveValid,0
-DECLARE_IMP PM_getdcwd,0
-DECLARE_IMP PM_setFileAttr,0
-DECLARE_IMP PM_mkdir,0
-DECLARE_IMP PM_rmdir,0
-DECLARE_IMP PM_getFileAttr,0
-DECLARE_IMP PM_getFileTime,0
-DECLARE_IMP PM_setFileTime,0
-DECLARE_IMP CPU_getProcessorName,0
-DECLARE_IMP PM_getVGAStateSize,0
-DECLARE_IMP PM_saveVGAState,0
-DECLARE_IMP PM_restoreVGAState,0
-DECLARE_IMP PM_vgaBlankDisplay,0
-DECLARE_IMP PM_vgaUnblankDisplay,0
-DECLARE_IMP PM_blockUntilTimeout,0
-DECLARE_IMP _PM_add64,0
-DECLARE_IMP _PM_sub64,0
-DECLARE_IMP _PM_mul64,0
-DECLARE_IMP _PM_div64,0
-DECLARE_IMP _PM_shr64,0
-DECLARE_IMP _PM_sar64,0
-DECLARE_IMP _PM_shl64,0
-DECLARE_IMP _PM_neg64,0
-DECLARE_IMP PCI_findBARSize,0
-DECLARE_IMP PCI_readRegBlock,0
-DECLARE_IMP PCI_writeRegBlock,0
-DECLARE_IMP PM_flushTLB,0
-DECLARE_IMP PM_useLocalMalloc,0
-DECLARE_IMP PM_malloc,0
-DECLARE_IMP PM_calloc,0
-DECLARE_IMP PM_realloc,0
-DECLARE_IMP PM_free,0
-DECLARE_IMP PM_getPhysicalAddrRange,0
-DECLARE_IMP PM_allocPage,0
-DECLARE_IMP PM_freePage,0
-DECLARE_IMP PM_agpInit,0
-DECLARE_IMP PM_agpExit,0
-DECLARE_IMP PM_agpReservePhysical,0
-DECLARE_IMP PM_agpReleasePhysical,0
-DECLARE_IMP PM_agpCommitPhysical,0
-DECLARE_IMP PM_agpFreePhysical,0
-DECLARE_IMP PCI_getNumDevices,0
-DECLARE_IMP PM_setLocalBPDPath,0
-DECLARE_IMP PM_loadDirectDraw,0
-DECLARE_IMP PM_unloadDirectDraw,0
-DECLARE_IMP PM_getDirectDrawWindow,0
-DECLARE_IMP PM_doSuspendApp,0
-END_IMPORTS_DEF
-
-        END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/aabeos.c b/board/MAI/bios_emulator/scitech/src/common/aabeos.c
deleted file mode 100644
index ad5698a406..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aabeos.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    (void)device;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timeval t;
-	gettimeofday(&t, NULL);
-	value->low = t.tv_sec*1000000 + t.tv_usec;
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aados.c b/board/MAI/bios_emulator/scitech/src/common/aados.c
deleted file mode 100644
index 342d2f33a4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aados.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  MSDOS
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the MSDOS operating system.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the DOS
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aalib.c b/board/MAI/bios_emulator/scitech/src/common/aalib.c
deleted file mode 100644
index 5003b22291..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aalib.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/****************************************************************************
-*
-*                     SciTech Nucleus Audio Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Any 32-bit protected mode environment
-*
-* Description:  C module for the Graphics Accelerator Driver API. Uses
-*               the SciTech PM library for interfacing with DOS
-*               extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/audio.h"
-#ifdef __WIN32_VXD__
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifdef  TEST_HARNESS
-extern PM_imports   _VARAPI _PM_imports;
-#else
-AA_exports  _VARAPI _AA_exports;
-static int          loaded = false;
-static PE_MODULE    *hModBPD = NULL;
-
-#ifdef  __DRIVER__
-extern PM_imports _PM_imports;
-#else
-#include "pmimp.h"
-#endif
-
-static N_imports _N_imports = {
-    sizeof(N_imports),
-    _OS_delay,
-    };
-
-#ifdef  __DRIVER__
-extern AA_imports _AA_imports;
-#else
-static AA_imports _AA_imports = {
-    sizeof(AA_imports),
-    };
-#endif
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME        "audio.bpd"
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported AA_exports.
-****************************************************************************/
-static void _AA_fatalErrorHandler(void)
-{
-    PM_fatalError("Unsupported Nucleus export function called! Please upgrade your copy of Nucleus!\n");
-}
-
-/****************************************************************************
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(void)
-{
-    AA_initLibrary_t    AA_initLibrary;
-    AA_exports          *aaExp;
-    char                filename[PM_MAX_PATH];
-    char                bpdpath[PM_MAX_PATH];
-    int                 i,max;
-    ulong               *p;
-
-    /* Check if we have already loaded the driver */
-    if (loaded)
-	return true;
-    PM_init();
-    _AA_exports.dwSize = sizeof(_AA_exports);
-
-    /* Open the BPD file */
-    if (!PM_findBPD(DLL_NAME,bpdpath))
-	return false;
-    strcpy(filename,bpdpath);
-    strcat(filename,DLL_NAME);
-    if ((hModBPD = PE_loadLibrary(filename,false)) == NULL)
-	return false;
-    if ((AA_initLibrary = (AA_initLibrary_t)PE_getProcAddress(hModBPD,"_AA_initLibrary")) == NULL)
-	return false;
-    bpdpath[strlen(bpdpath)-1] = 0;
-    if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
-	strcpy(bpdpath,PM_getNucleusConfigPath());
-    else {
-	PM_backslash(bpdpath);
-	strcat(bpdpath,"config");
-	}
-    if ((aaExp = AA_initLibrary(bpdpath,filename,&_PM_imports,&_N_imports,&_AA_imports)) == NULL)
-	PM_fatalError("AA_initLibrary failed!\n");
-
-    /* Initialize all default imports to point to fatal error handler
-     * for upwards compatibility, and copy the exported functions.
-     */
-    max = sizeof(_AA_exports)/sizeof(AA_initLibrary_t);
-    for (i = 0,p = (ulong*)&_AA_exports; i < max; i++)
-	*p++ = (ulong)_AA_fatalErrorHandler;
-    memcpy(&_AA_exports,aaExp,MIN(sizeof(_AA_exports),aaExp->dwSize));
-    loaded = true;
-    return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI AA_status(void)
-{
-    if (!loaded)
-	return nDriverNotFound;
-    return _AA_exports.AA_status();
-}
-
-/* {secret} */
-const char * NAPI AA_errorMsg(
-    N_int32 status)
-{
-    if (!loaded)
-	return "Unable to load Nucleus device driver!";
-    return _AA_exports.AA_errorMsg(status);
-}
-
-/* {secret} */
-int NAPI AA_getDaysLeft(void)
-{
-    if (!LoadDriver())
-	return -1;
-    return _AA_exports.AA_getDaysLeft();
-}
-
-/* {secret} */
-int NAPI AA_registerLicense(uchar *license)
-{
-    if (!LoadDriver())
-	return 0;
-    return _AA_exports.AA_registerLicense(license);
-}
-
-/* {secret} */
-int NAPI AA_enumerateDevices(void)
-{
-    if (!LoadDriver())
-	return 0;
-    return _AA_exports.AA_enumerateDevices();
-}
-
-/* {secret} */
-AA_devCtx * NAPI AA_loadDriver(N_int32 deviceIndex)
-{
-    if (!LoadDriver())
-	return NULL;
-    return _AA_exports.AA_loadDriver(deviceIndex);
-}
-#endif
-
-typedef struct {
-    N_uint32    low;
-    N_uint32    high;
-    } AA_largeInteger;
-
-void    NAPI _OS_delay8253(N_uint32 microSeconds);
-ibool   NAPI _GA_haveCPUID(void);
-uint    NAPI _GA_getCPUIDFeatures(void);
-void    NAPI _GA_readTimeStamp(AA_largeInteger *time);
-#define CPU_HaveRDTSC   0x00000010
-
-/****************************************************************************
-REMARKS:
-This function delays for the specified number of microseconds
-****************************************************************************/
-void NAPI _OS_delay(
-    N_uint32 microSeconds)
-{
-    static ibool    inited = false;
-    LZTimerObject   tm;
-
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	if (!inited) {
-	    ZTimerInit();
-	    inited = true;
-	    }
-	LZTimerOnExt(&tm);
-	while (LZTimerLapExt(&tm) < microSeconds)
-	    ;
-	LZTimerOnExt(&tm);
-	}
-    else
-	_OS_delay8253(microSeconds);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aalinux.c b/board/MAI/bios_emulator/scitech/src/common/aalinux.c
deleted file mode 100644
index d3d468ed0f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aalinux.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool        haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    (void)device;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timeval t;
-	gettimeofday(&t, NULL);
-	value->low = t.tv_sec*1000000 + t.tv_usec;
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aaos2.c b/board/MAI/bios_emulator/scitech/src/common/aaos2.c
deleted file mode 100644
index 0ec8c9fcf1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aaos2.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  OS/2 32-bit
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the OS/2 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static HFILE        hSDDHelp;
-static ulong        outLen;         /* Must not cross 64Kb boundary!    */
-static ulong        result;         /* Must not cross 64Kb boundary!    */
-static ibool        haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-This function returns a pointer to the common graphics driver loaded in the
-helper VxD. The memory for the VxD is shared between all processes via
-the VxD, so that the VxD, 16-bit code and 32-bit code all see the same
-state when accessing the graphics binary portable driver.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    /* Initialise the PM library and connect to our runtime DLL's */
-    PM_init();
-
-    /* Open our helper device driver */
-    if (DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
-	    FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
-	    NULL))
-	PM_fatalError("Unable to open SDDHELP$ helper device driver!");
-    outLen = sizeof(result);
-    DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,PMHELP_GETSHAREDINFO,
-	NULL, 0, NULL,
-	&result, outLen, &outLen);
-    DosClose(hSDDHelp);
-    if (result) {
-	/* We have found the shared Nucleus packet. Because not all processes
-	 * map to SDDPMI.DLL, we need to ensure that we connect to this
-	 * DLL so that it gets mapped into our address space (that is
-	 * where the shared Nucleus packet is located). Simply doing a
-	 * DosLoadModule on it is enough for this.
-	 */
-	HMODULE hModSDDPMI;
-	char    buf[80];
-	DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"SDDPMI.DLL",&hModSDDPMI);
-	}
-    return (GA_sharedInfo*)result;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	DosTmrQueryTime((QWORD*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aaqnx.c b/board/MAI/bios_emulator/scitech/src/common/aaqnx.c
deleted file mode 100644
index 13531be99f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aaqnx.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the QNX operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool        haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    (void)device;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timespec ts;
-
-	clock_gettime(CLOCK_REALTIME, &ts);
-	value->low = (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aartt.c b/board/MAI/bios_emulator/scitech/src/common/aartt.c
deleted file mode 100644
index 1a5a67a4e9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aartt.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the RTTarget-32 operating system environments.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    (void)device;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aasmx.c b/board/MAI/bios_emulator/scitech/src/common/aasmx.c
deleted file mode 100644
index 163060f717..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aasmx.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  smx32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the smx32 platform -- no vxD support.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "nucleus/graphics.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    (void)device;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aavxd.c b/board/MAI/bios_emulator/scitech/src/common/aavxd.c
deleted file mode 100644
index 221b02bd9b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aavxd.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32 VxD
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Win32 VxD's.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Return the internal shared info structure.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    static GA_sharedInfo shared = {0,-1};
-    return &shared;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	VTD_Get_Real_Time(&value->high,&value->low);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aawin32.c b/board/MAI/bios_emulator/scitech/src/common/aawin32.c
deleted file mode 100644
index 541df4ac58..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aawin32.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Win32 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define STRICT
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-#if GA_MAX_DEVICES > 4
-#error GA_MAX_DEVICES has changed!
-#endif
-
-static ibool            haveRDTSC;
-static GA_largeInteger  countFreq;
-static GA_loadDriver_t  ORG_GA_loadDriver;
-extern HANDLE           _PM_hDevice;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Get the current graphics driver imports from the VxD
-
-REMARKS:
-This function returns a pointer to the common graphics driver loaded in the
-helper VxD. The memory for the VxD is shared between all processes via
-the VxD, so that the VxD, 16-bit code and 32-bit code all see the same
-state when accessing the graphics binary portable driver.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[2];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    PM_init();
-    inBuf[0] = device;
-    if (DeviceIoControl(_PM_hDevice, PMHELP_GETSHAREDINFO32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL)) {
-	return (GA_sharedInfo*)outBuf[0];
-	}
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp)
-{
-    (void)gaExp;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the software stereo module by either calling
-the Nucleus libraries directly, or calling into the VxD if we are running
-on the shared Nucleus libraries loaded by the Windows VxD.
-****************************************************************************/
-static ibool NAPI _GA_softStereoInit(
-    GA_devCtx *dc)
-{
-    if (_PM_hDevice) {
-	DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-	DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-	DWORD   count;      /* Count of bytes returned from VxD */
-
-	inBuf[0] = (ulong)dc;
-	if (DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOINIT32, inBuf, sizeof(inBuf),
-		outBuf, sizeof(outBuf), &count, NULL)) {
-	    return outBuf[0];
-	    }
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns on software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoOn(void)
-{
-    if (_PM_hDevice) {
-	DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOON32, NULL, 0,
-	    NULL, 0, NULL, NULL);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function schedules a software stereo mode page flip, either directly
-or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoScheduleFlip(
-    N_uint32 leftAddr,
-    N_uint32 rightAddr)
-{
-    if (_PM_hDevice) {
-	DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-	DWORD   count;      /* Count of bytes returned from VxD */
-
-	inBuf[0] = (ulong)leftAddr;
-	inBuf[1] = (ulong)rightAddr;
-	DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOFLIP32, inBuf, sizeof(inBuf),
-	    NULL, 0, &count, NULL);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static N_int32 NAPI _GA_softStereoGetFlipStatus(void)
-{
-    if (_PM_hDevice) {
-	DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-	DWORD   count;      /* Count of bytes returned from VxD */
-
-	if (DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOFLIPSTATUS32, NULL, 0,
-		outBuf, sizeof(outBuf), &count, NULL)) {
-	    return outBuf[0];
-	    }
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoWaitTillFlipped(void)
-{
-    while (!_GA_softStereoGetFlipStatus())
-	;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoOff(void)
-{
-    if (_PM_hDevice) {
-	DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOOFF32, NULL, 0,
-	    NULL, 0, NULL, NULL);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function disable the software stereo handler, either directly or via
-the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoExit(void)
-{
-    if (_PM_hDevice) {
-	DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOEXIT32, NULL, 0,
-	    NULL, 0, NULL, NULL);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-We hook this function in here so that we can avoid the memory detect and
-other destructive sequences in the drivers if we are loading the driver
-from a Win32 application (our display drivers in contrast load them inside
-the VxD directly, but the control panel applets use this function).
-****************************************************************************/
-static GA_devCtx * NAPI _GA_loadDriver(
-    N_int32 deviceIndex,
-    N_int32 shared)
-{
-    GA_devCtx   *dc;
-    DWORD       inBuf[1];
-    DWORD       outBuf[1];
-    N_int32     totalMemory = 0,oldIOPL;
-
-    if (deviceIndex >= GA_MAX_DEVICES)
-	PM_fatalError("DeviceIndex too large in GA_loadDriver!");
-    PM_init();
-    inBuf[0] = deviceIndex;
-    if (DeviceIoControl(_PM_hDevice, PMHELP_GETMEMSIZE32,
-	    inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), NULL, NULL))
-	totalMemory = outBuf[0];
-    if (totalMemory == 0)
-	totalMemory = 8192;
-    _GA_exports.GA_forceMemSize(totalMemory,shared);
-    oldIOPL = PM_setIOPL(3);
-    dc = ORG_GA_loadDriver(deviceIndex,shared);
-    PM_setIOPL(oldIOPL);
-    return dc;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	return true;
-	}
-    else if (QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq)) {
-	haveRDTSC = false;
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	QueryPerformanceCounter((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/agplib.c b/board/MAI/bios_emulator/scitech/src/common/agplib.c
deleted file mode 100644
index 476eedc873..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/agplib.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Any 32-bit protected mode environment
-*
-* Description:  C module for the Graphics Accelerator Driver API. Uses
-*               the SciTech PM library for interfacing with DOS
-*               extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include "nucleus/agp.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifndef DEBUG_AGP_DRIVER
-static AGP_exports  _AGP_exports;
-static int          loaded = false;
-static PE_MODULE    *hModBPD = NULL;
-
-static N_imports _N_imports = {
-    sizeof(N_imports),
-    _OS_delay,
-    };
-
-static AGP_imports _AGP_imports = {
-    sizeof(AGP_imports),
-    };
-#endif
-
-#include "pmimp.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME        "agp.bpd"
-
-#ifndef DEBUG_AGP_DRIVER
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported GA_exports.
-****************************************************************************/
-static void _AGP_fatalErrorHandler(void)
-{
-    PM_fatalError("Unsupported AGP export function called! Please upgrade your copy of AGP!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-shared  - True to load the driver into shared memory.
-
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(void)
-{
-    AGP_initLibrary_t   AGP_initLibrary;
-    AGP_exports         *agpExp;
-    char                filename[PM_MAX_PATH];
-    char                bpdpath[PM_MAX_PATH];
-    int                 i,max;
-    ulong               *p;
-
-    /* Check if we have already loaded the driver */
-    if (loaded)
-	return true;
-    PM_init();
-
-    /* Open the BPD file */
-    if (!PM_findBPD(DLL_NAME,bpdpath))
-	return false;
-    strcpy(filename,bpdpath);
-    strcat(filename,DLL_NAME);
-    if ((hModBPD = PE_loadLibrary(filename,false)) == NULL)
-	return false;
-    if ((AGP_initLibrary = (AGP_initLibrary_t)PE_getProcAddress(hModBPD,"_AGP_initLibrary")) == NULL)
-	return false;
-    bpdpath[strlen(bpdpath)-1] = 0;
-    if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
-	strcpy(bpdpath,PM_getNucleusConfigPath());
-    else {
-	PM_backslash(bpdpath);
-	strcat(bpdpath,"config");
-	}
-    if ((agpExp = AGP_initLibrary(bpdpath,filename,GA_getSystemPMImports(),&_N_imports,&_AGP_imports)) == NULL)
-	PM_fatalError("AGP_initLibrary failed!\n");
-    _AGP_exports.dwSize = sizeof(_AGP_exports);
-    max = sizeof(_AGP_exports)/sizeof(AGP_initLibrary_t);
-    for (i = 0,p = (ulong*)&_AGP_exports; i < max; i++)
-	*p++ = (ulong)_AGP_fatalErrorHandler;
-    memcpy(&_AGP_exports,agpExp,MIN(sizeof(_AGP_exports),agpExp->dwSize));
-    loaded = true;
-    return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI AGP_status(void)
-{
-    if (!loaded)
-	return nDriverNotFound;
-    return _AGP_exports.AGP_status();
-}
-
-/* {secret} */
-const char * NAPI AGP_errorMsg(
-    N_int32 status)
-{
-    if (!loaded)
-	return "Unable to load Nucleus device driver!";
-    return _AGP_exports.AGP_errorMsg(status);
-}
-
-/* {secret} */
-AGP_devCtx * NAPI AGP_loadDriver(N_int32 deviceIndex)
-{
-    if (!LoadDriver())
-	return NULL;
-    return _AGP_exports.AGP_loadDriver(deviceIndex);
-}
-
-/* {secret} */
-void NAPI AGP_unloadDriver(
-    AGP_devCtx *dc)
-{
-    if (loaded)
-	_AGP_exports.AGP_unloadDriver(dc);
-}
-
-/* {secret} */
-void NAPI AGP_getGlobalOptions(
-    AGP_globalOptions *options)
-{
-    if (LoadDriver())
-	_AGP_exports.AGP_getGlobalOptions(options);
-}
-
-/* {secret} */
-void NAPI AGP_setGlobalOptions(
-    AGP_globalOptions *options)
-{
-    if (LoadDriver())
-	_AGP_exports.AGP_setGlobalOptions(options);
-}
-
-/* {secret} */
-void NAPI AGP_saveGlobalOptions(
-    AGP_globalOptions *options)
-{
-    if (loaded)
-	_AGP_exports.AGP_saveGlobalOptions(options);
-}
-#endif
-
-/* {secret} */
-void NAPI _OS_delay8253(N_uint32 microSeconds);
-
-/****************************************************************************
-REMARKS:
-This function delays for the specified number of microseconds
-****************************************************************************/
-void NAPI _OS_delay(
-    N_uint32 microSeconds)
-{
-    static ibool    inited = false;
-    static ibool    haveRDTSC;
-    LZTimerObject   tm;
-
-    if (!inited) {
-#ifndef __WIN32_VXD__
-	/* This has been causing problems in VxD's for some reason, so for now */
-	/* we avoid using it. */
-	if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	    ZTimerInit();
-	    haveRDTSC = true;
-	    }
-	else
-#endif
-	    haveRDTSC = false;
-	inited = true;
-	}
-    if (haveRDTSC) {
-	LZTimerOnExt(&tm);
-	while (LZTimerLapExt(&tm) < microSeconds)
-	    ;
-	LZTimerOnExt(&tm);
-	}
-    else
-	_OS_delay8253(microSeconds);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/center.c b/board/MAI/bios_emulator/scitech/src/common/center.c
deleted file mode 100644
index 68e17c2a94..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/center.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
-*
-*                  Display Doctor Windows Interface Code
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code is a proprietary trade secret of     |
-*  |SciTech Software, Inc., located at 505 Wall Street, Chico, CA 95928 |
-*  |USA (www.scitechsoft.com).  ANY UNAUTHORIZED POSSESSION, USE,       |
-*  |VIEWING, COPYING, MODIFICATION OR DISSEMINATION OF THIS CODE IS     |
-*  |STRICTLY PROHIBITED BY LAW.  Unless you have current, express       |
-*  |written authorization from SciTech to possess or use this code, you |
-*  |may be subject to civil and/or criminal penalties.                  |
-*  |                                                                    |
-*  |If you received this code in error or you would like to report      |
-*  |improper use, please immediately contact SciTech Software, Inc. at  |
-*  |530-894-8400.                                                       |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     C++ 3.0
-* Environment:  Win16
-*
-* Description:  Dialog driven configuration program for UniVBE and
-*               WinDirect Professional products.
-*
-****************************************************************************/
-
-#include "center.h"
-
-/*------------------------------ Implementation ---------------------------*/
-
-void _EXPORT CenterWindow(HWND hWndCenter, HWND parent, BOOL repaint)
-/****************************************************************************
-*
-* Function:     CenterWindow
-* Parameters:   hWndCenter  - Window to center
-*               parent      - Handle for parent window
-*               repaint     - true if window should be re-painted
-*
-* Description:  Centers the specified window within the bounds of the
-*               specified parent window. If the parent window is NULL, then
-*               we center it using the Desktop window.
-*
-****************************************************************************/
-{
-    HWND    hWndParent = (parent ? parent : GetDesktopWindow());
-    RECT    RectParent;
-    RECT    RectCenter;
-    int     CenterX,CenterY,Height,Width;
-
-    GetWindowRect(hWndParent, &RectParent);
-    GetWindowRect(hWndCenter, &RectCenter);
-
-    Width = (RectCenter.right - RectCenter.left);
-    Height = (RectCenter.bottom - RectCenter.top);
-    CenterX = ((RectParent.right - RectParent.left) - Width) / 2;
-    CenterY = ((RectParent.bottom - RectParent.top) - Height) / 2;
-
-    if ((CenterX < 0) || (CenterY < 0)) {
-	/* The Center Window is smaller than the parent window. */
-	if (hWndParent != GetDesktopWindow()) {
-	    /* If the parent window is not the desktop use the desktop size. */
-	    CenterX = (GetSystemMetrics(SM_CXSCREEN) - Width) / 2;
-	    CenterY = (GetSystemMetrics(SM_CYSCREEN) - Height) / 2;
-	    }
-	CenterX = (CenterX < 0) ? 0: CenterX;
-	CenterY = (CenterY < 0) ? 0: CenterY;
-	}
-    else {
-	CenterX += RectParent.left;
-	CenterY += RectParent.top;
-	}
-
-    /* Copy the values into RectCenter */
-    RectCenter.left = CenterX;
-    RectCenter.right = CenterX + Width;
-    RectCenter.top = CenterY;
-    RectCenter.bottom = CenterY + Height;
-
-    /* Move the window to the new location */
-    MoveWindow(hWndCenter, RectCenter.left, RectCenter.top,
-	    (RectCenter.right - RectCenter.left),
-	    (RectCenter.bottom - RectCenter.top), repaint);
-}
-
-void _EXPORT CenterLogo(HWND hWndLogo, HWND hWndParent, int CenterY)
-/****************************************************************************
-*
-* Function:     CenterLogo
-* Parameters:   hWndLogo    - Window to center
-*               hWndParent  - Handle for parent window
-*               CenterY     - Top coordinate for logo
-*
-* Description:  Centers the specified window within the bounds of the
-*               specified parent window in the horizontal direction only.
-*
-****************************************************************************/
-{
-    RECT    RectParent;
-    RECT    RectCenter;
-    int     CenterX,Height,Width;
-
-    GetWindowRect(hWndParent, &RectParent);
-    GetWindowRect(hWndLogo, &RectCenter);
-    Width = (RectCenter.right - RectCenter.left);
-    Height = (RectCenter.bottom - RectCenter.top);
-    CenterX = ((RectParent.right - RectParent.left) - Width) / 2;
-
-    /* Copy the values into RectCenter */
-    RectCenter.left = CenterX;
-    RectCenter.right = CenterX + Width;
-    RectCenter.top = CenterY;
-    RectCenter.bottom = CenterY + Height;
-
-    /* Move the window to the new location */
-    MoveWindow(hWndLogo, RectCenter.left, RectCenter.top,
-	    (RectCenter.right - RectCenter.left),
-	    (RectCenter.bottom - RectCenter.top), false);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/cmdline.c b/board/MAI/bios_emulator/scitech/src/common/cmdline.c
deleted file mode 100644
index 531e5e1312..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/cmdline.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/****************************************************************************
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  This module contains code to parse the command line,
-*               extracting options and parameters in standard System V
-*               style.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include "cmdline.h"
-
-/*------------------------- Global variables ------------------------------*/
-
-int     nextargv    =   1;          /* Index into argv array            */
-char    *nextchar   =   NULL;       /* Pointer to next character        */
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define IS_SWITCH_CHAR(c)       ((c) == '-')
-#define IS_NOT_SWITCH_CHAR(c)   ((c) != '-')
-
-/****************************************************************************
-DESCRIPTION:
-Parse the command line for specific options
-
-HEADER:
-cmdline.h
-
-PARAMETERS:
-argc        - Value passed to program through argc variable
-argv        - Pointer to the argv array passed to the program
-format      - A string representing the expected format of the command line
-argument    - Pointer to optional argument on command line
-
-RETURNS:
-Character code representing the next option parsed from the command line by
-getcmdopt. Returns ALLDONE (-1) when there are no more parameters to be parsed
-on the command line, PARAMETER (-2) when the argument being parsed is a
-parameter and not an option switch and lastly INVALID (-3) if an error
-occured while parsing the command line.
-
-REMARKS:
-Function to parse the command line option switches in UNIX System V style.
-When getcmdopt is called, it returns the character code of the next valid
-option that is parsed from the command line as specified by the Format
-string. The format string should be in the following form:
-
-    "abcd:e:f:"
-
-where a,b and c represent single switch style options and the character
-code returned by getcmdopt is the only value returned. Also d, e and f
-represent options that expect arguments immediately after them on the
-command line. The argument that follows the option on the command line is
-returned via a reference in the pointer argument. Thus a valid command line
-for this format string might be:
-
-    myprogram -adlines -b -f format infile outfile
-
-where a and b will be returned as single character options with no argument,
-while d is returned with the argument lines and f is returned with the
-argument format.
-
-When getcmdopt returns with PARAMETER (we attempted to parse a paramter, not
-an option), the global variable NextArgv will hold an index in the argv
-array to the argument on the command line AFTER the options, ie in the
-above example the string 'infile'. If the parameter is successfully used,
-NextArgv should be incremented and getcmdopt can be called again to parse any
-more options. Thus you can also have options interspersed throught the
-command line. eg:
-
-    myprogram -adlines infile -b outfile -f format
-
-can be made to be a valid form of the above command line.
-****************************************************************************/
-int getcmdopt(
-    int argc,
-    char **argv,
-    char *format,
-    char **argument)
-{
-    char    ch;
-    char    *formatchar;
-
-    if (argc > nextargv) {
-	if (nextchar == NULL) {
-	    nextchar = argv[nextargv];      /* Index next argument      */
-	    if (nextchar == NULL) {
-		nextargv++;
-		return ALLDONE;             /* No more options          */
-		}
-	    if (IS_NOT_SWITCH_CHAR(*nextchar)) {
-		nextchar = NULL;
-		return PARAMETER;           /* We have a parameter      */
-		}
-	    nextchar++;                     /* Move past switch operator */
-	    if (IS_SWITCH_CHAR(*nextchar)) {
-		nextchar = NULL;
-		return INVALID;             /* Ignore rest of line      */
-		}
-	    }
-	if ((ch = *(nextchar++)) == 0) {
-	    nextchar = NULL;
-	    return INVALID;                 /* No options on line       */
-	    }
-
-	if (ch == ':' ||  (formatchar = strchr(format, ch)) == NULL)
-	    return INVALID;
-
-	if (*(++formatchar) == ':') {   /* Expect an argument after option */
-	    nextargv++;
-	    if (*nextchar == 0) {
-		if (argc <= nextargv)
-		    return INVALID;
-		nextchar = argv[nextargv++];
-		}
-	    *argument = nextchar;
-	    nextchar = NULL;
-	    }
-	else {                      /* We have a switch style option    */
-	    if (*nextchar == 0) {
-		nextargv++;
-		nextchar = NULL;
-		}
-	    *argument = NULL;
-	    }
-	return ch;                  /* return the option specifier      */
-	}
-    nextchar = NULL;
-    nextargv++;
-    return ALLDONE;                 /* no arguments on command line     */
-}
-
-/****************************************************************************
-PARAMETERS:
-optarr      - Description for the option we are parsing
-argument    - String to parse
-
-RETURNS:
-INVALID on error, ALLDONE on success.
-
-REMARKS:
-Parses the argument string depending on the type of argument that is
-expected, filling in the argument for that option. Note that to parse a
-string, we simply return a pointer to argument.
-****************************************************************************/
-static int parse_option(
-    Option *optarr,
-    char *argument)
-{
-    int     num_read;
-
-    switch ((int)(optarr->type)) {
-	case OPT_INTEGER:
-	    num_read = sscanf(argument,"%d",(int*)optarr->arg);
-	    break;
-	case OPT_HEX:
-	    num_read = sscanf(argument,"%x",(int*)optarr->arg);
-	    break;
-	case OPT_OCTAL:
-	    num_read = sscanf(argument,"%o",(int*)optarr->arg);
-	    break;
-	case OPT_UNSIGNED:
-	    num_read = sscanf(argument,"%u",(uint*)optarr->arg);
-	    break;
-	case OPT_LINTEGER:
-	    num_read = sscanf(argument,"%ld",(long*)optarr->arg);
-	    break;
-	case OPT_LHEX:
-	    num_read = sscanf(argument,"%lx",(long*)optarr->arg);
-	    break;
-	case OPT_LOCTAL:
-	    num_read = sscanf(argument,"%lo",(long*)optarr->arg);
-	    break;
-	case OPT_LUNSIGNED:
-	    num_read = sscanf(argument,"%lu",(ulong*)optarr->arg);
-	    break;
-	case OPT_FLOAT:
-	    num_read = sscanf(argument,"%f",(float*)optarr->arg);
-	    break;
-	case OPT_DOUBLE:
-	    num_read = sscanf(argument,"%lf",(double*)optarr->arg);
-	    break;
-	case OPT_LDOUBLE:
-	    num_read = sscanf(argument,"%Lf",(long double*)optarr->arg);
-	    break;
-	case OPT_STRING:
-	    num_read = 1;           /* This always works    */
-	    *((char**)optarr->arg) = argument;
-	    break;
-	default:
-	    return INVALID;
-	}
-
-    if (num_read == 0)
-	return INVALID;
-    else
-	return ALLDONE;
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-argc        - Number of arguments on command line
-argv        - Array of command line arguments
-num_opt     - Number of options in option array
-optarr      - Array to specify how to parse the command line
-do_param    - Routine to handle a command line parameter
-
-RETURNS:
-ALLDONE, INVALID or HELP
-
-REMARKS:
-Function to parse the command line according to a table of options. This
-routine calls getcmdopt above to parse each individual option and attempts
-to parse each option into a variable of the specified type. The routine
-can parse integers and long integers in either decimal, octal, hexadecimal
-notation, unsigned integers and unsigned longs, strings and option switches.
-Option switches are simply boolean variables that get turned on if the
-switch was parsed.
-
-Parameters are extracted from the command line by calling a user supplied
-routine do_param() to handle each parameter as it is encountered. The
-routine do_param() should accept a pointer to the parameter on the command
-line and an integer representing how many parameters have been encountered
-(ie: 1 if this is the first parameter, 10 if it is the 10th etc), and return
-ALLDONE upon successfully parsing it or INVALID if the parameter was invalid.
-
-We return either ALLDONE if all the options were successfully parsed,
-INVALID if an invalid option was encountered or HELP if any of -h, -H or
--? were present on the command line.
-****************************************************************************/
-int getargs(
-    int argc,
-    char *argv[],
-    int num_opt,
-    Option optarr[],
-    int (*do_param)(
-	char *param,
-	int num))
-{
-    int     i,opt;
-    char    *argument;
-    int     param_num = 1;
-    char    cmdstr[MAXARG*2 + 4];
-
-    /* Build the command string from the array of options   */
-
-    strcpy(cmdstr,"hH?");
-    for (i = 0,opt = 3; i < num_opt; i++,opt++) {
-	cmdstr[opt] = optarr[i].opt;
-	if (optarr[i].type != OPT_SWITCH) {
-	    cmdstr[++opt] = ':';
-	    }
-	}
-    cmdstr[opt] = '\0';
-
-    for (;;) {
-	opt = getcmdopt(argc,argv,cmdstr,&argument);
-	switch (opt) {
-	    case 'H':
-	    case 'h':
-	    case '?':
-		return HELP;
-	    case ALLDONE:
-		return ALLDONE;
-	    case INVALID:
-		return INVALID;
-	    case PARAMETER:
-		if (do_param == NULL)
-		    return INVALID;
-		if (do_param(argv[nextargv],param_num) == INVALID)
-		    return INVALID;
-		nextargv++;
-		param_num++;
-		break;
-	    default:
-
-		/* Search for the option in the option array. We are
-		 * guaranteed to find it.
-		 */
-
-		for (i = 0; i < num_opt; i++) {
-		    if (optarr[i].opt == opt)
-			break;
-		    }
-		if (optarr[i].type == OPT_SWITCH)
-		    *((ibool*)optarr[i].arg) = true;
-		else {
-		    if (parse_option(&optarr[i],argument) == INVALID)
-			return INVALID;
-		    }
-		break;
-	    }
-	}
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-num_opt - Number of options in the table
-optarr  - Table of option descriptions
-
-REMARKS:
-Prints the description of each option in a standard format to the standard
-output device. The description for each option is obtained from the table
-of options.
-****************************************************************************/
-void print_desc(
-    int num_opt,
-    Option optarr[])
-{
-    int     i;
-
-    for (i = 0; i < num_opt; i++) {
-	if (optarr[i].type == OPT_SWITCH)
-	    printf("  -%c       %s\n",optarr[i].opt,optarr[i].desc);
-	else
-	    printf("  -%c<arg>  %s\n",optarr[i].opt,optarr[i].desc);
-	}
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-moduleName  - Module name for program
-cmdLine     - Command line to parse
-pargc       - Pointer to 'argc' parameter
-pargv       - Pointer to 'argv' parameter
-maxArgc     - Maximum argv array index
-
-REMARKS:
-Parses a command line from a single string into the C style 'argc' and
-'argv' format. Most useful for Windows programs where the command line
-is passed in verbatim.
-****************************************************************************/
-int parse_commandline(
-    char *moduleName,
-    char *cmdLine,
-    int *pargc,
-    char *argv[],
-    int maxArgv)
-{
-    static char str[512];
-    static char filename[260];
-    char        *prevWord = NULL;
-    ibool        inQuote = FALSE;
-    ibool        noStrip = FALSE;
-    int         argc;
-
-    argc = 0;
-    strcpy(filename,moduleName);
-    argv[argc++] = filename;
-    cmdLine = strncpy(str, cmdLine, sizeof(str)-1);
-    while (*cmdLine) {
-	switch (*cmdLine) {
-	    case '"' :
-		if (prevWord != NULL) {
-		    if (inQuote) {
-			if (!noStrip)
-			    *cmdLine = '\0';
-			argv [argc++] = prevWord;
-			prevWord = NULL;
-			}
-		    else
-			noStrip = TRUE;
-		    }
-		inQuote = !inQuote;
-		break;
-	    case ' ' :
-	    case '\t' :
-		if (!inQuote) {
-		    if (prevWord != NULL) {
-			*cmdLine = '\0';
-			argv [argc++] = prevWord;
-			prevWord = NULL;
-			noStrip = FALSE;
-			}
-		    }
-		break;
-	    default :
-		if (prevWord == NULL)
-		    prevWord = cmdLine;
-		break;
-		}
-	if (argc >= maxArgv - 1)
-	    break;
-	cmdLine++;
-	}
-
-    if ((prevWord != NULL || (inQuote && prevWord != NULL)) && argc < maxArgv - 1) {
-	*cmdLine = '\0';
-	argv [argc++] = prevWord;
-	}
-    argv[argc] = NULL;
-
-    /* Return updated parameters */
-    return (*pargc = argc);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gabeos.c b/board/MAI/bios_emulator/scitech/src/common/gabeos.c
deleted file mode 100644
index a934bd1cfc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gabeos.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    /* TODO: We may very well want to provide a system shared library */
-    /*       that eports the PM functions required by the Nucleus library */
-    /*       for BeOS here. That will eliminate fatal errors loading new */
-    /*       drivers on BeOS! */
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timeval t;
-	gettimeofday(&t, NULL);
-	value->low = t.tv_sec*1000000 + t.tv_usec;
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gados.c b/board/MAI/bios_emulator/scitech/src/common/gados.c
deleted file mode 100644
index d2be77694f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gados.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  MSDOS
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the MSDOS operating system.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing to do here for DOS. Basically since DOS has no system wide shared
-library mechanism we are essentially screwed if the binary API changes.
-By default for 32-bit DOS apps the local Nucleus drivers should always be
-used in preference to the system wide Nucleus drivers.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#if !defined(TEST_HARNESS) && !defined(VBETEST)
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the DOS
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/galib.c b/board/MAI/bios_emulator/scitech/src/common/galib.c
deleted file mode 100644
index f2eacc3d24..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/galib.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Any 32-bit protected mode environment
-*
-* Description:  C module for the Graphics Accelerator Driver API. Uses
-*               the SciTech PM library for interfacing with DOS
-*               extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifndef TEST_HARNESS
-GA_exports  _VARAPI __GA_exports;
-static int          loaded = false;
-static PE_MODULE    *hModBPD = NULL;
-
-static N_imports _N_imports = {
-    sizeof(N_imports),
-    _OS_delay,
-    };
-
-static GA_imports _GA_imports = {
-    sizeof(GA_imports),
-    GA_getSharedInfo,
-    GA_TimerInit,
-    GA_TimerRead,
-    GA_TimerDifference,
-    };
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME        "graphics.bpd"
-
-/****************************************************************************
-REMARKS:
-This function is no longer used but we must implement it and return NULL
-for compatibility with older binary drivers.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
-    int device)
-{
-    return NULL;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported GA_exports.
-****************************************************************************/
-static void _GA_fatalErrorHandler(void)
-{
-    PM_fatalError("Unsupported Nucleus export function called! Please upgrade your copy of Nucleus!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-shared  - True to load the driver into shared memory.
-
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(
-    ibool shared)
-{
-    GA_initLibrary_t    GA_initLibrary;
-    GA_exports          *gaExp;
-    char                filename[PM_MAX_PATH];
-    char                bpdpath[PM_MAX_PATH];
-    int                 i,max;
-    ulong               *p;
-
-    /* Check if we have already loaded the driver */
-    if (loaded)
-	return true;
-    PM_init();
-
-    /* First try to see if we can find the system wide shared exports
-     * if they are available. Under OS/2 this connects to our global
-     * shared Nucleus loader in SDDPMI.DLL.
-     */
-    __GA_exports.dwSize = sizeof(__GA_exports);
-    if (GA_getSharedExports(&__GA_exports,shared))
-	return loaded = true;
-
-    /* Open the BPD file */
-    if (!PM_findBPD(DLL_NAME,bpdpath))
-	return false;
-    strcpy(filename,bpdpath);
-    strcat(filename,DLL_NAME);
-    if ((hModBPD = PE_loadLibrary(filename,shared)) == NULL)
-	return false;
-    if ((GA_initLibrary = (GA_initLibrary_t)PE_getProcAddress(hModBPD,"_GA_initLibrary")) == NULL)
-	return false;
-    bpdpath[strlen(bpdpath)-1] = 0;
-    if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
-	strcpy(bpdpath,PM_getNucleusConfigPath());
-    else {
-	PM_backslash(bpdpath);
-	strcat(bpdpath,"config");
-	}
-    if ((gaExp = GA_initLibrary(shared,bpdpath,filename,GA_getSystemPMImports(),&_N_imports,&_GA_imports)) == NULL)
-	PM_fatalError("GA_initLibrary failed!\n");
-
-    /* Initialize all default imports to point to fatal error handler
-     * for upwards compatibility, and copy the exported functions.
-     */
-    max = sizeof(__GA_exports)/sizeof(GA_initLibrary_t);
-    for (i = 0,p = (ulong*)&__GA_exports; i < max; i++)
-	*p++ = (ulong)_GA_fatalErrorHandler;
-    memcpy(&__GA_exports,gaExp,MIN(sizeof(__GA_exports),gaExp->dwSize));
-    loaded = true;
-    return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI GA_status(void)
-{
-    if (!loaded)
-	return nDriverNotFound;
-    return __GA_exports.GA_status();
-}
-
-/* {secret} */
-const char * NAPI GA_errorMsg(
-    N_int32 status)
-{
-    if (!loaded)
-	return "Unable to load Nucleus device driver!";
-    return __GA_exports.GA_errorMsg(status);
-}
-
-/* {secret} */
-int NAPI GA_getDaysLeft(N_int32 shared)
-{
-    if (!LoadDriver(shared))
-	return -1;
-    return __GA_exports.GA_getDaysLeft(shared);
-}
-
-/* {secret} */
-int NAPI GA_registerLicense(uchar *license,N_int32 shared)
-{
-    if (!LoadDriver(shared))
-	return 0;
-    return __GA_exports.GA_registerLicense(license,shared);
-}
-
-/* {secret} */
-ibool NAPI GA_loadInGUI(N_int32 shared)
-{
-    if (!LoadDriver(shared))
-	return false;
-    return __GA_exports.GA_loadInGUI(shared);
-}
-
-/* {secret} */
-int NAPI GA_enumerateDevices(N_int32 shared)
-{
-    if (!LoadDriver(shared))
-	return 0;
-    return __GA_exports.GA_enumerateDevices(shared);
-}
-
-/* {secret} */
-GA_devCtx * NAPI GA_loadDriver(N_int32 deviceIndex,N_int32 shared)
-{
-    if (!LoadDriver(shared))
-	return NULL;
-    return __GA_exports.GA_loadDriver(deviceIndex,shared);
-}
-
-/* {secret} */
-void NAPI GA_getGlobalOptions(
-    GA_globalOptions *options,
-    ibool shared)
-{
-    if (LoadDriver(shared))
-	__GA_exports.GA_getGlobalOptions(options,shared);
-}
-
-/* {secret} */
-PE_MODULE * NAPI GA_loadLibrary(
-    const char *szBPDName,
-    ulong *size,
-    ibool shared)
-{
-    if (!LoadDriver(shared))
-	return NULL;
-    return __GA_exports.GA_loadLibrary(szBPDName,size,shared);
-}
-
-/* {secret} */
-GA_devCtx * NAPI GA_getCurrentDriver(
-    N_int32 deviceIndex)
-{
-    /* Bail for older drivers that didn't export this function! */
-    if (!__GA_exports.GA_getCurrentDriver)
-	return NULL;
-    return __GA_exports.GA_getCurrentDriver(deviceIndex);
-}
-
-/* {secret} */
-REF2D_driver * NAPI GA_getCurrentRef2d(
-    N_int32 deviceIndex)
-{
-    /* Bail for older drivers that didn't export this function! */
-    if (!__GA_exports.GA_getCurrentRef2d)
-	return NULL;
-    return __GA_exports.GA_getCurrentRef2d(deviceIndex);
-}
-
-/* {secret} */
-int NAPI GA_isOEMVersion(ibool shared)
-{
-    if (!LoadDriver(shared))
-	return 0;
-    return __GA_exports.GA_isOEMVersion(shared);
-}
-
-/* {secret} */
-N_uint32 * NAPI GA_getLicensedDevices(ibool shared)
-{
-    if (!LoadDriver(shared))
-	return 0;
-    return __GA_exports.GA_getLicensedDevices(shared);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/common/galinux.c b/board/MAI/bios_emulator/scitech/src/common/galinux.c
deleted file mode 100644
index 47e4e8581d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/galinux.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool        haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    /* TODO: We may very well want to provide a system shared library */
-    /*       that eports the PM functions required by the Nucleus library */
-    /*       for Linux here. That will eliminate fatal errors loading new */
-    /*       drivers on Linux! */
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timeval t;
-	gettimeofday(&t, NULL);
-	value->low = t.tv_sec*1000000 + t.tv_usec;
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gantdrv.c b/board/MAI/bios_emulator/scitech/src/common/gantdrv.c
deleted file mode 100644
index 050f73767c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gantdrv.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  NT device driver
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the NT device drivers.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	KeQuerySystemTime((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gaos2.c b/board/MAI/bios_emulator/scitech/src/common/gaos2.c
deleted file mode 100644
index 26e6503e5f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gaos2.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  OS/2 32-bit
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the OS/2 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-static ibool    haveRDTSC = false;
-static ulong    parms[3];       /* Must not cross 64Kb boundary!    */
-static ulong    result[4];      /* Must not cross 64Kb boundary!    */
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-func        - Helper device driver function to call
-
-RETURNS:
-First return value from the device driver in parmsOut[0]
-
-REMARKS:
-Function to open our helper device driver, call it and close the file
-handle. Note that we have to open the device driver for every call because
-of two problems:
-
- 1. We cannot open a single file handle in a DLL that is shared amongst
-    programs, since every process must have it's own open file handle.
-
- 2. For some reason there appears to be a limit of about 12 open file
-    handles on a device driver in the system. Hence when we open more
-    than about 12 file handles things start to go very strange.
-
-Hence we simply open the file handle every time that we need to call the
-device driver to work around these problems.
-****************************************************************************/
-static ulong CallSDDHelp(
-    int func)
-{
-    static ulong    inLen;          /* Must not cross 64Kb boundary!    */
-    static ulong    outLen;         /* Must not cross 64Kb boundary!    */
-    HFILE           hSDDHelp;
-
-    /* If this code in here fails, we are screwed! Many of our drivers
-     * use this code and don't have a C library, so we simply assume we
-     * can't fail here.
-     */
-    DosOpen(PMHELP_NAME,&hSDDHelp,&result[0],0,0,
-	    FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
-	    NULL);
-    DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,func,
-	     &parms, inLen = sizeof(parms), &inLen,
-	    &result, outLen = sizeof(result), &outLen);
-    DosClose(hSDDHelp);
-    return result[0];
-}
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-For OS/2 we don't need to do anything special because Nucleus is always
-loaded via the shared SDDPMI driver when SDD is loaded so we don't need
-a system wide PM library imports function.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-PARAMETERS:
-gaExp   - Place to store the exported functions
-shared  - True if connecting to the shared, global Nucleus driver
-
-REMARKS:
-For OS/2 if SDD is loaded we *always* connect to the shared Nucleus functions
-contained within the SDDPMI driver. This allows the Nucleus functions contained
-within this driver to be utilised by all Nucleus apps in the system and
-maintains a consistent state between versions.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    /* In test harness mode, we need to load a local copy of Nucleus */
-#if !defined (TEST_HARNESS) || defined (DEBUG_SDDPMI)
-    HMODULE     hModSDDPMI;
-    char        buf[80];
-    GA_exports  *exp;
-
-    /* Initialise the PM library and connect to our runtime DLL's */
-    PM_init();
-    if (CallSDDHelp(PMHELP_GETSHAREDEXP) != 0) {
-	/* We have found the shared Nucleus exports. Because not all processes
-	 * map to SDDPMI.DLL, we need to ensure that we connect to this
-	 * DLL so that it gets mapped into our address space (that is
-	 * where the shared Nucleus loader code is located). Simply doing a
-	 * DosLoadModule on it is enough for this.
-	 */
-	DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"SDDPMI.DLL",&hModSDDPMI);
-	exp = (GA_exports*)result[0];
-	memcpy(gaExp,exp,MIN(gaExp->dwSize,exp->dwSize));
-	return true;
-	}
-#endif
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	DosTmrQueryTime((QWORD*)value);
-}
-
-/****************************************************************************
-REMARKS:
-On OS/2, we need special memory allocation functions if we build SDDPMI in
-test harness mode. But if we build GATest etc. in test mode, we want to use
-the normal C runtime functions, so route them back here.
-****************************************************************************/
-
-#if defined (TEST_HARNESS) && !defined (DEBUG_SDDPMI)
-
-/* Undefine these macros first or we'll recurse to hell! */
-#undef malloc
-#undef calloc
-#undef realloc
-#undef free
-
-void *SDDPMI_malloc(size_t size) {
-    return malloc(size);
-}
-
-void *SDDPMI_calloc(size_t num, size_t size) {
-    return calloc(num, size);
-}
-
-void SDDPMI_free(void *ptr) {
-    free(ptr);
-}
-
-void *SDDPMI_realloc(void *ptr, size_t size) {
-    return realloc(ptr, size);
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/common/gaqnx.c b/board/MAI/bios_emulator/scitech/src/common/gaqnx.c
deleted file mode 100644
index 525d662869..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gaqnx.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the QNX operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool        haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    /* TODO: We may very well want to provide a system shared library */
-    /*       that eports the PM functions required by the Nucleus library */
-    /*       for QNX here. That will eliminate fatal errors loading new */
-    /*       drivers on QNX! */
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	haveRDTSC = true;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else {
-	struct timespec ts;
-
-	clock_gettime(CLOCK_REALTIME, &ts);
-	value->low = (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
-	value->high = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gartt.c b/board/MAI/bios_emulator/scitech/src/common/gartt.c
deleted file mode 100644
index 3a41f59c18..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gartt.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the RTTarget-32 operating system environments.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gasmx.c b/board/MAI/bios_emulator/scitech/src/common/gasmx.c
deleted file mode 100644
index ae31941f49..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gasmx.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  smx32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the smx32 platform -- no vxD support.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "nucleus/graphics.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gavxd.c b/board/MAI/bios_emulator/scitech/src/common/gavxd.c
deleted file mode 100644
index fc8ba8d657..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gavxd.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32 VxD
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Win32 VxD's.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool            haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    (void)gaExp;
-    (void)shared;
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	VTD_Get_Real_Time(&value->high,&value->low);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gawin32.c b/board/MAI/bios_emulator/scitech/src/common/gawin32.c
deleted file mode 100644
index 69443344f4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gawin32.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Nucleus Graphics Architecture
-*
-*               Copyright (C) 1991-1998 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code contains proprietary technology      |
-*  |owned by SciTech Software, Inc., located at 505 Wall Street,        |
-*  |Chico, CA 95928 USA (http://www.scitechsoft.com).                   |
-*  |                                                                    |
-*  |The contents of this file are subject to the SciTech Nucleus        |
-*  |License; you may *not* use this file or related software except in  |
-*  |compliance with the License. You may obtain a copy of the License   |
-*  |at http://www.scitechsoft.com/nucleus-license.txt                   |
-*  |                                                                    |
-*  |Software distributed under the License is distributed on an         |
-*  |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or      |
-*  |implied. See the License for the specific language governing        |
-*  |rights and limitations under the License.                           |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  OS specific Nucleus Graphics Architecture services for
-*               the Win32 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define STRICT
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-#define DLL_NAME        "nga_w32.dll"
-
-extern HANDLE           _PM_hDevice;
-static HMODULE          hModDLL = NULL;
-static ibool            useRing0Driver = false;
-static ibool            haveRDTSC;
-static GA_largeInteger  countFreq;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Loads the shared "nga_w32.dll" library from disk and connects to it. This
-library is *always* located in the same directory as the Nucleus
-graphics.bpd file.
-****************************************************************************/
-static ibool LoadSharedDLL(void)
-{
-    char                filename[PM_MAX_PATH];
-    char                bpdpath[PM_MAX_PATH];
-
-    /* Check if we have already loaded the DLL */
-    if (hModDLL)
-	return true;
-    PM_init();
-
-    /* Open the DLL file */
-    if (!PM_findBPD(DLL_NAME,bpdpath))
-	return false;
-    strcpy(filename,bpdpath);
-    strcat(filename,DLL_NAME);
-    if ((hModDLL = LoadLibrary(filename)) == NULL)
-	return false;
-    return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-
-Note that for Win32 we also call into the loaded PMHELP device driver
-as necessary to change the local Nucleus path for system wide Nucleus
-drivers.
-****************************************************************************/
-void NAPI GA_setLocalPath(
-    const char *path)
-{
-    DWORD   inBuf[1];
-    DWORD   outBuf[1],outCnt;
-
-    PM_setLocalBPDPath(path);
-    if (_PM_hDevice != INVALID_HANDLE_VALUE) {
-	inBuf[0] = (DWORD)path;
-	DeviceIoControl(_PM_hDevice, PMHELP_GASETLOCALPATH32,
-	    inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &outCnt, NULL);
-	}
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
-    PM_imports * pmImp;
-    PM_imports * (NAPIP _GA_getSystemPMImports)(void);
-
-    if (LoadSharedDLL()) {
-	/* Note that Visual C++ build DLL's with only a single underscore in front
-	 * of the exported name while Watcom C provides two of them. We check for
-	 * both to allow working with either compiled DLL.
-	 */
-	if ((_GA_getSystemPMImports = (void*)GetProcAddress(hModDLL,"_GA_getSystemPMImports")) != NULL) {
-	    if ((_GA_getSystemPMImports = (void*)GetProcAddress(hModDLL,"__GA_getSystemPMImports")) != NULL) {
-		pmImp = _GA_getSystemPMImports();
-		memcpy(&_PM_imports,pmImp,MIN(_PM_imports.dwSize,pmImp->dwSize));
-		return pmImp;
-		}
-	    }
-	}
-    return &_PM_imports;
-}
-
-/****************************************************************************
-PARAMETERS:
-gaExp   - Place to store the exported functions
-shared  - True if connecting to the shared, global Nucleus driver
-
-REMARKS:
-For Win32 if we are connecting to the shared, global Nucleus driver (loaded
-at ring 0) then we need to load a special nga_w32.dll library which contains
-thunks to call down into the Ring 0 device driver as necessary. If we are
-connecting to the application local Nucleus drivers (ie: Nucleus on DirectDraw
-emulation layer) then we do nothing here.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
-    GA_exports *gaExp,
-    ibool shared)
-{
-    GA_exports * exp;
-    GA_exports * (NAPIP _GA_getSystemGAExports)(void);
-
-    useRing0Driver = false;
-    if (shared) {
-	if (!LoadSharedDLL())
-	    PM_fatalError("Unable to load " DLL_NAME "!");
-	if ((_GA_getSystemGAExports = (void*)GetProcAddress(hModDLL,"_GA_getSystemGAExports")) == NULL)
-	    if ((_GA_getSystemGAExports = (void*)GetProcAddress(hModDLL,"__GA_getSystemGAExports")) == NULL)
-		PM_fatalError("Unable to load " DLL_NAME "!");
-	exp = _GA_getSystemGAExports();
-	memcpy(gaExp,exp,MIN(gaExp->dwSize,exp->dwSize));
-	useRing0Driver = true;
-	return true;
-	}
-    return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
-    GA_devCtx *dc,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    static ibool (NAPIP _GA_queryFunctions)(GA_devCtx *dc,N_uint32 id,void _FAR_ *funcs) = NULL;
-
-    if (useRing0Driver) {
-	/* Call the version in nga_w32.dll if it is loaded */
-	if (!_GA_queryFunctions) {
-	    if ((_GA_queryFunctions = (void*)GetProcAddress(hModDLL,"_GA_queryFunctions")) == NULL)
-		if ((_GA_queryFunctions = (void*)GetProcAddress(hModDLL,"__GA_queryFunctions")) == NULL)
-		    PM_fatalError("Unable to get exports from " DLL_NAME "!");
-	    }
-	return _GA_queryFunctions(dc,id,funcs);
-	}
-    return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
-    REF2D_driver *ref2d,
-    N_uint32 id,
-    void _FAR_ *funcs)
-{
-    static ibool (NAPIP _REF2D_queryFunctions)(REF2D_driver *ref2d,N_uint32 id,void _FAR_ *funcs) = NULL;
-
-    if (useRing0Driver) {
-	/* Call the version in nga_w32.dll if it is loaded */
-	if (!_REF2D_queryFunctions) {
-	    if ((_REF2D_queryFunctions = (void*)GetProcAddress(hModDLL,"_REF2D_queryFunctions")) == NULL)
-		if ((_REF2D_queryFunctions = (void*)GetProcAddress(hModDLL,"__REF2D_queryFunctions")) == NULL)
-		    PM_fatalError("Unable to get exports from " DLL_NAME "!");
-	    }
-	return _REF2D_queryFunctions(ref2d,id,funcs);
-	}
-    return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
-    if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
-	haveRDTSC = true;
-	return true;
-	}
-    else if (QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq)) {
-	haveRDTSC = false;
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
-    GA_largeInteger *value)
-{
-    if (haveRDTSC)
-	_GA_readTimeStamp(value);
-    else
-	QueryPerformanceCounter((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c b/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c
deleted file mode 100644
index 1d547e9abb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/****************************************************************************
-*
-*                   VESA Generalized Timing Formula (GTF)
-*                               Version 1.1
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Developed by: SciTech Software, Inc.
-*
-* Language:     ANSI C
-* Environment:  Any.
-*
-* Description:  C module for generating GTF compatible timings given a set
-*               of input requirements. Translated from the original GTF
-*               1.14 spreadsheet definition.
-*
-*               Compile with #define TESTING to build a command line test
-*               program.
-*
-*               NOTE: The code in here has been written for clarity and
-*                     to follow the original GTF spec as closely as
-*                     possible.
-*
-****************************************************************************/
-
-#include "gtf.h"
-#ifndef __WIN32_VXD__
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <math.h>
-#endif
-
-/*------------------------- Global Variables ------------------------------*/
-
-static GTF_constants GC = {
-    1.8,                    /* Margin size as percentage of display     */
-    8,                      /* Character cell granularity               */
-    1,                      /* Minimum front porch in lines/chars       */
-    3,                      /* Width of V sync in lines                 */
-    8,                      /* Width of H sync as percent of total      */
-    550,                    /* Minimum vertical sync + back porch (us)  */
-    600,                    /* Blanking formula gradient                */
-    40,                     /* Blanking formula offset                  */
-    128,                    /* Blanking formula scaling factor          */
-    20,                     /* Blanking formula scaling factor weight   */
-    };
-
-/*-------------------------- Implementation -------------------------------*/
-
-#ifdef __WIN32_VXD__
-/* These functions are not supported in a VxD, so we stub them out so this
- * module will at least compile. Calling the functions in here will do
- * something wierd!
- */
-double sqrt(double x)
-{ return x; }
-
-double floor(double x)
-{ return x; }
-
-double pow(double x,double y)
-{ return x*y; }
-#endif
-
-static double round(double v)
-{
-    return floor(v + 0.5);
-}
-
-static void GetInternalConstants(GTF_constants *c)
-/****************************************************************************
-*
-* Function:     GetInternalConstants
-* Parameters:   c   - Place to store the internal constants
-*
-* Description:  Calculates the rounded, internal set of GTF constants.
-*               These constants are different to the real GTF constants
-*               that can be set up for the monitor. The calculations to
-*               get these real constants are defined in the 'Work Area'
-*               after the constants are defined in the Excel spreadsheet.
-*
-****************************************************************************/
-{
-    c->margin = GC.margin;
-    c->cellGran = round(GC.cellGran);
-    c->minPorch = round(GC.minPorch);
-    c->vSyncRqd = round(GC.vSyncRqd);
-    c->hSync = GC.hSync;
-    c->minVSyncBP = GC.minVSyncBP;
-    if (GC.k == 0)
-	c->k = 0.001;
-    else
-	c->k = GC.k;
-    c->m = (c->k / 256) * GC.m;
-    c->c = (GC.c - GC.j) * (c->k / 256) + GC.j;
-    c->j = GC.j;
-}
-
-void GTF_calcTimings(double hPixels,double vLines,double freq,
-    int type,ibool wantMargins,ibool wantInterlace,GTF_timings *t)
-/****************************************************************************
-*
-* Function:     GTF_calcTimings
-* Parameters:   hPixels     - X resolution
-*               vLines      - Y resolution
-*               freq        - Frequency (Hz, KHz or MHz depending on type)
-*               type        - 1 - vertical, 2 - horizontal, 3 - dot clock
-*               margins     - True if margins should be generated
-*               interlace   - True if interlaced timings to be generated
-*               t           - Place to store the resulting timings
-*
-* Description:  Calculates a set of GTF timing parameters given a specified
-*               resolution and vertical frequency. The horizontal frequency
-*               and dot clock will be automatically generated by this
-*               routines.
-*
-*               For interlaced modes the CRTC parameters are calculated for
-*               a single field, so will be half what would be used in
-*               a non-interlaced mode.
-*
-****************************************************************************/
-{
-    double          interlace,vFieldRate,hPeriod;
-    double          topMarginLines,botMarginLines;
-    double          leftMarginPixels,rightMarginPixels;
-    double          hPeriodEst,vSyncBP,vBackPorch;
-    double          vTotalLines,vFieldRateEst;
-    double          hTotalPixels,hTotalActivePixels,hBlankPixels;
-    double          idealDutyCycle,hSyncWidth,hSyncBP,hBackPorch;
-    double          idealHPeriod;
-    double          vFreq,hFreq,dotClock;
-    GTF_constants   c;
-
-    /* Get rounded GTF constants used for internal calculations */
-    GetInternalConstants(&c);
-
-    /* Move input parameters into appropriate variables */
-    vFreq = hFreq = dotClock = freq;
-
-    /* Round pixels to character cell granularity */
-    hPixels = round(hPixels / c.cellGran) * c.cellGran;
-
-    /* For interlaced mode halve the vertical parameters, and double
-     * the required field refresh rate.
-     */
-    vFieldRate = vFreq;
-    interlace = 0;
-    if (wantInterlace)
-	dotClock *= 2;
-
-    /* Determine the lines for margins */
-    if (wantMargins) {
-	topMarginLines = round(c.margin / 100 * vLines);
-	botMarginLines = round(c.margin / 100 * vLines);
-	}
-    else {
-	topMarginLines = 0;
-	botMarginLines = 0;
-	}
-
-    if (type != GTF_lockPF) {
-	if (type == GTF_lockVF) {
-	    /* Estimate the horizontal period */
-	    hPeriodEst = ((1/vFieldRate) - (c.minVSyncBP/1000000)) /
-		(vLines + (2*topMarginLines) + c.minPorch + interlace) * 1000000;
-
-	    /* Find the number of lines in vSync + back porch */
-	    vSyncBP = round(c.minVSyncBP / hPeriodEst);
-	    }
-	else if (type == GTF_lockHF) {
-	    /* Find the number of lines in vSync + back porch */
-	    vSyncBP = round((c.minVSyncBP * hFreq) / 1000);
-	    }
-
-	/* Find the number of lines in the V back porch alone */
-	vBackPorch = vSyncBP - c.vSyncRqd;
-
-	/* Find the total number of lines in the vertical period */
-	vTotalLines = vLines + topMarginLines + botMarginLines + vSyncBP
-	    + interlace + c.minPorch;
-
-	if (type == GTF_lockVF) {
-	    /* Estimate the vertical frequency */
-	    vFieldRateEst = 1000000 / (hPeriodEst * vTotalLines);
-
-	    /* Find the actual horizontal period */
-	    hPeriod = (hPeriodEst * vFieldRateEst) / vFieldRate;
-
-	    /* Find the actual vertical field frequency */
-	    vFieldRate = 1000000 / (hPeriod * vTotalLines);
-	    }
-	else if (type == GTF_lockHF) {
-	    /* Find the actual vertical field frequency */
-	    vFieldRate = (hFreq / vTotalLines) * 1000;
-	    }
-	}
-
-    /* Find the number of pixels in the left and right margins */
-    if (wantMargins) {
-	leftMarginPixels = round(hPixels * c.margin) / (100 * c.cellGran);
-	rightMarginPixels = round(hPixels * c.margin) / (100 * c.cellGran);
-	}
-    else {
-	leftMarginPixels = 0;
-	rightMarginPixels = 0;
-	}
-
-    /* Find the total number of active pixels in image + margins */
-    hTotalActivePixels = hPixels + leftMarginPixels + rightMarginPixels;
-
-    if (type == GTF_lockVF) {
-	/* Find the ideal blanking duty cycle */
-	idealDutyCycle = c.c - ((c.m * hPeriod) / 1000);
-	}
-    else if (type == GTF_lockHF) {
-	/* Find the ideal blanking duty cycle */
-	idealDutyCycle = c.c - (c.m / hFreq);
-	}
-    else if (type == GTF_lockPF) {
-	/* Find ideal horizontal period from blanking duty cycle formula */
-	idealHPeriod = (((c.c - 100) + (sqrt((pow(100-c.c,2)) +
-	    (0.4 * c.m * (hTotalActivePixels + rightMarginPixels +
-	    leftMarginPixels) / dotClock)))) / (2 * c.m)) * 1000;
-
-	/* Find the ideal blanking duty cycle */
-	idealDutyCycle = c.c - ((c.m * idealHPeriod) / 1000);
-	}
-
-    /* Find the number of pixels in blanking time */
-    hBlankPixels = round((hTotalActivePixels * idealDutyCycle) /
-	((100 - idealDutyCycle) * c.cellGran)) * c.cellGran;
-
-    /* Find the total number of pixels */
-    hTotalPixels = hTotalActivePixels + hBlankPixels;
-
-    /* Find the horizontal back porch */
-    hBackPorch = round((hBlankPixels / 2) / c.cellGran) * c.cellGran;
-
-    /* Find the horizontal sync width */
-    hSyncWidth = round(((c.hSync/100) * hTotalPixels) / c.cellGran) * c.cellGran;
-
-    /* Find the horizontal sync + back porch */
-    hSyncBP = hBackPorch + hSyncWidth;
-
-    if (type == GTF_lockPF) {
-	/* Find the horizontal frequency */
-	hFreq = (dotClock / hTotalPixels) * 1000;
-
-	/* Find the number of lines in vSync + back porch */
-	vSyncBP = round((c.minVSyncBP * hFreq) / 1000);
-
-	/* Find the number of lines in the V back porch alone */
-	vBackPorch = vSyncBP - c.vSyncRqd;
-
-	/* Find the total number of lines in the vertical period */
-	vTotalLines = vLines + topMarginLines + botMarginLines + vSyncBP
-	    + interlace + c.minPorch;
-
-	/* Find the actual vertical field frequency */
-	vFieldRate = (hFreq / vTotalLines) * 1000;
-	}
-    else {
-	if (type == GTF_lockVF) {
-	    /* Find the horizontal frequency */
-	    hFreq = 1000 / hPeriod;
-	    }
-	else if (type == GTF_lockHF) {
-	    /* Find the horizontal frequency */
-	    hPeriod = 1000 / hFreq;
-	    }
-
-	/* Find the pixel clock frequency */
-	dotClock = hTotalPixels / hPeriod;
-	}
-
-    /* Return the computed frequencies */
-    t->vFreq = vFieldRate;
-    t->hFreq = hFreq;
-    t->dotClock = dotClock;
-
-    /* Determine the vertical timing parameters */
-    t->h.hTotal = (int)hTotalPixels;
-    t->h.hDisp = (int)hTotalActivePixels;
-    t->h.hSyncStart = t->h.hTotal - (int)hSyncBP;
-    t->h.hSyncEnd = t->h.hTotal - (int)hBackPorch;
-    t->h.hFrontPorch = t->h.hSyncStart - t->h.hDisp;
-    t->h.hSyncWidth = (int)hSyncWidth;
-    t->h.hBackPorch = (int)hBackPorch;
-
-    /* Determine the vertical timing parameters */
-    t->v.vTotal = (int)vTotalLines;
-    t->v.vDisp = (int)vLines;
-    t->v.vSyncStart = t->v.vTotal - (int)vSyncBP;
-    t->v.vSyncEnd = t->v.vTotal - (int)vBackPorch;
-    t->v.vFrontPorch = t->v.vSyncStart - t->v.vDisp;
-    t->v.vSyncWidth = (int)c.vSyncRqd;
-    t->v.vBackPorch = (int)vBackPorch;
-    if (wantInterlace) {
-	/* Halve the timings for interlaced modes */
-	t->v.vTotal /= 2;
-	t->v.vDisp /= 2;
-	t->v.vSyncStart /= 2;
-	t->v.vSyncEnd /= 2;
-	t->v.vFrontPorch /= 2;
-	t->v.vSyncWidth /= 2;
-	t->v.vBackPorch /= 2;
-	t->dotClock /= 2;
-	}
-
-    /* Mark as GTF timing using the sync polarities */
-    t->interlace = (wantInterlace) ? 'I' : 'N';
-    t->hSyncPol = '-';
-    t->vSyncPol = '+';
-}
-
-void GTF_getConstants(GTF_constants *constants)
-{ *constants = GC; }
-
-void GTF_setConstants(GTF_constants *constants)
-{ GC = *constants; }
-
-#ifdef  TESTING_GTF
-
-void main(int argc,char *argv[])
-{
-    FILE        *f;
-    double      xPixels,yPixels,freq;
-    ibool       interlace;
-    GTF_timings t;
-
-    if (argc != 5 && argc != 6) {
-	printf("Usage: GTFCALC <xPixels> <yPixels> <freq> [[Hz] [KHz] [MHz]] [I]\n");
-	printf("\n");
-	printf("where <xPixels> is the horizontal resolution of the mode, <yPixels> is the\n");
-	printf("vertical resolution of the mode. The <freq> value will be the frequency to\n");
-	printf("drive the calculations, and will be either the vertical frequency (in Hz)\n");
-	printf("the horizontal frequency (in KHz) or the dot clock (in MHz). To generate\n");
-	printf("timings for an interlaced mode, add 'I' to the end of the command line.\n");
-	printf("\n");
-	printf("For example to generate timings for 640x480 at 60Hz vertical:\n");
-	printf("\n");
-	printf("    GTFCALC 640 480 60 Hz\n");
-	printf("\n");
-	printf("For example to generate timings for 640x480 at 31.5KHz horizontal:\n");
-	printf("\n");
-	printf("    GTFCALC 640 480 31.5 KHz\n");
-	printf("\n");
-	printf("For example to generate timings for 640x480 with a 25.175Mhz dot clock:\n");
-	printf("\n");
-	printf("    GTFCALC 640 480 25.175 MHz\n");
-	printf("\n");
-	printf("GTFCALC will print a summary of the results found, and dump the CRTC\n");
-	printf("values to the UVCONFIG.CRT file in the format used by SciTech Display Doctor.\n");
-	exit(1);
-	}
-
-    /* Get values from command line */
-    xPixels = atof(argv[1]);
-    yPixels = atof(argv[2]);
-    freq = atof(argv[3]);
-    interlace = ((argc == 6) && (argv[5][0] == 'I'));
-
-    /* Compute the CRTC timings */
-    if (toupper(argv[4][0]) == 'H')
-	GTF_calcTimings(xPixels,yPixels,freq,GTF_lockVF,false,interlace,&t);
-    else if (toupper(argv[4][0]) == 'K')
-	GTF_calcTimings(xPixels,yPixels,freq,GTF_lockHF,false,interlace,&t);
-    else if (toupper(argv[4][0]) == 'M')
-	GTF_calcTimings(xPixels,yPixels,freq,GTF_lockPF,false,interlace,&t);
-    else {
-	printf("Unknown command line!\n");
-	exit(1);
-	}
-
-    /* Dump summary info to standard output */
-    printf("CRTC values for %.0fx%.0f @ %.2f %s\n", xPixels, yPixels, freq, argv[4]);
-    printf("\n");
-    printf("  hTotal      = %-4d    vTotal      = %-4d\n",
-	t.h.hTotal, t.v.vTotal);
-    printf("  hDisp       = %-4d    vDisp       = %-4d\n",
-	t.h.hDisp, t.v.vDisp);
-    printf("  hSyncStart  = %-4d    vSyncStart  = %-4d\n",
-	t.h.hSyncStart, t.v.vSyncStart);
-    printf("  hSyncEnd    = %-4d    vSyncEnd    = %-4d\n",
-	t.h.hSyncEnd, t.v.vSyncEnd);
-    printf("  hFrontPorch = %-4d    vFrontPorch = %-4d\n",
-	t.h.hFrontPorch, t.v.vFrontPorch);
-    printf("  hSyncWidth  = %-4d    vSyncWidth  = %-4d\n",
-	t.h.hSyncWidth, t.v.vSyncWidth);
-    printf("  hBackPorch  = %-4d    vBackPorch  = %-4d\n",
-	t.h.hBackPorch, t.v.vBackPorch);
-    printf("\n");
-    printf("  Interlaced  = %s\n", (t.interlace == 'I') ? "Yes" : "No");
-    printf("  H sync pol  = %c\n", t.hSyncPol);
-    printf("  V sync pol  = %c\n", t.vSyncPol);
-    printf("\n");
-    printf("  Vert freq   = %.2f Hz\n", t.vFreq);
-    printf("  Horiz freq  = %.2f KHz\n", t.hFreq);
-    printf("  Dot Clock   = %.2f Mhz\n",    t.dotClock);
-
-    /* Dump to file in format used by SciTech Display Doctor */
-    if ((f = fopen("UVCONFIG.CRT","w")) != NULL) {
-	fprintf(f, "[%.0f %.0f]\n", xPixels, yPixels);
-	fprintf(f, "%d %d %d %d '%c' %s\n",
-	    t.h.hTotal, t.h.hDisp,
-	    t.h.hSyncStart, t.h.hSyncEnd,
-	    t.hSyncPol, (t.interlace == 'I') ? "I" : "NI");
-	fprintf(f, "%d %d %d %d '%c'\n",
-	    t.v.vTotal, t.v.vDisp,
-	    t.v.vSyncStart, t.v.vSyncEnd,
-	    t.vSyncPol);
-	fprintf(f, "%.2f\n", t.dotClock);
-	fclose(f);
-	}
-}
-
-#endif  /* TESTING */
diff --git a/board/MAI/bios_emulator/scitech/src/common/libcimp.c b/board/MAI/bios_emulator/scitech/src/common/libcimp.c
deleted file mode 100644
index ab73ad578c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/libcimp.c
+++ /dev/null
@@ -1,827 +0,0 @@
-/****************************************************************************
-*
-*                       SciTech MGL Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module to implement a the OS specific side of the Binary
-*               Portable DLL C runtime library. The functions in here
-*               are imported into the Binary Portable DLL's to implement
-*               OS specific services.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "drvlib/peloader.h"
-#include "drvlib/attrib.h"
-#include "drvlib/libc/init.h"
-#define __BUILDING_PE_LOADER__
-#include "drvlib/libc/file.h"
-#if defined(__WIN32_VXD__)
-#include "vxdfile.h"
-#endif
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <malloc.h>
-#include <time.h>
-#include <signal.h>
-#include <fcntl.h>
-#if defined(__GNUC__) || defined(__UNIX__)
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#else
-#include <io.h>
-#endif
-#include "drvlib/attrib.h"
-#include "drvlib/libc/init.h"
-#define __BUILDING_PE_LOADER__
-#include "drvlib/libc/file.h"
-#if defined(__WINDOWS__) || defined(TNT) || defined(__RTTARGET__)
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-#ifdef  __MSDOS__
-#include <dos.h>
-#endif
-#ifdef  __OS2__
-#define INCL_DOS
-#define INCL_DOSERRORS
-#define INCL_SUB
-#include <os2.h>
-#endif
-#endif
-
-/* No text or binary modes for Unix */
-
-#ifndef O_BINARY
-#define O_BINARY    0
-#define O_TEXT      0
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#define MAX_FILES   16
-static FILE *openHandles[MAX_FILES] = {NULL};
-#endif
-
-/* <stdlib.h> stub functions */
-void    _CDECL stub_abort(void);
-int     _CDECL stub_atexit(void (*)(void));
-void *  _CDECL stub_calloc(size_t _nelem, size_t _size);
-void    _CDECL stub_exit(int _status);
-void    _CDECL stub_free(void *_ptr);
-char *  _CDECL stub_getenv(const char *_name);
-void *  _CDECL stub_malloc(size_t _size);
-void *  _CDECL stub_realloc(void *_ptr, size_t _size);
-int     _CDECL stub_system(const char *_s);
-int     _CDECL stub_putenv(const char *_val);
-
-/* <libc/file.h> stub functions */
-int     _CDECL stub_open(const char *_path, int _oflag, unsigned _mode);
-int     _CDECL stub_access(const char *_path, int _amode);
-int     _CDECL stub_close(int _fildes);
-off_t   _CDECL stub_lseek(int _fildes, off_t _offset, int _whence);
-size_t  _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte);
-int     _CDECL stub_unlink(const char *_path);
-size_t  _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte);
-int     _CDECL stub_isatty(int _fildes);
-
-/* <stdio.h> stub functions */
-int     _CDECL stub_remove(const char *_filename);
-int     _CDECL stub_rename(const char *_old, const char *_new);
-
-/* <time.h> stub functions */
-time_t  _CDECL stub_time(time_t *_tod);
-
-/* <signal.h> stub functions */
-int     _CDECL stub_raise(int);
-void *  _CDECL stub_signal(int, void *);
-
-/* <drvlib/attrib.h> functions */
-#define stub_OS_setfileattr    _OS_setfileattr
-#define stub_OS_getcurrentdate _OS_getcurrentdate
-
-LIBC_imports    _VARAPI ___imports = {
-    sizeof(LIBC_imports),
-
-    /* <stdlib.h> exports */
-    stub_abort,
-    stub_atexit,
-    stub_calloc,
-    stub_exit,
-    stub_free,
-    stub_getenv,
-    stub_malloc,
-    stub_realloc,
-    stub_system,
-    stub_putenv,
-
-    /* <libc/file.h> exports */
-    stub_open,
-    stub_access,
-    stub_close,
-    stub_lseek,
-    stub_read,
-    stub_unlink,
-    stub_write,
-    stub_isatty,
-
-    /* <stdio.h> exports */
-    stub_remove,
-    stub_rename,
-
-    /* <signal.h> functions */
-    stub_raise,
-    stub_signal,
-
-    /* <time.h> exports */
-    stub_time,
-
-    /* <drvlib/attrib.h> exports */
-    stub_OS_setfileattr,
-    stub_OS_getcurrentdate,
-    };
-
-/*---------------------- Stub function implementation ---------------------*/
-
-/* <stdlib.h> stub functions */
-void _CDECL stub_abort(void)
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
-    abort();
-#endif
-}
-
-int _CDECL stub_atexit(void (*func)(void))
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
-    return atexit((void(*)(void))func);
-#else
-    return -1;
-#endif
-}
-
-void * _CDECL stub_calloc(size_t _nelem, size_t _size)
-{ return __PM_calloc(_nelem,_size); }
-
-void _CDECL stub_exit(int _status)
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
-    exit(_status);
-#endif
-}
-
-void _CDECL stub_free(void *_ptr)
-{ __PM_free(_ptr); }
-
-char * _CDECL stub_getenv(const char *_name)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
-    return NULL;
-#else
-    return getenv(_name);
-#endif
-}
-
-void * _CDECL stub_malloc(size_t _size)
-{ return __PM_malloc(_size); }
-
-void * _CDECL stub_realloc(void *_ptr, size_t _size)
-{ return __PM_realloc(_ptr,_size); }
-
-int _CDECL stub_system(const char *_s)
-{
-#if defined(__WINDOWS__) || defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__) || defined(__RTTARGET__)
-    (void)_s;
-    return -1;
-#else
-    return system(_s);
-#endif
-}
-
-int _CDECL stub_putenv(const char *_val)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
-    return -1;
-#else
-    return putenv((char*)_val);
-#endif
-}
-
-time_t _CDECL stub_time(time_t *_tod)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
-    return 0;
-#else
-    return time(_tod);
-#endif
-}
-
-#if     defined(__MSDOS__)
-
-#if defined(TNT) && defined(_MSC_VER)
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ SetFileAttributes((LPSTR)filename, (DWORD)attrib); }
-
-#else
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ _dos_setfileattr(filename,attrib); }
-
-#endif
-
-#elif   defined(__WIN32_VXD__)
-
-#define USE_LOCAL_FILEIO
-#define USE_LOCAL_GETDATE
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
-    char    mode[10];
-    int     i;
-
-    /* Find an empty file handle to use */
-    for (i = 3; i < MAX_FILES; i++) {
-	if (!openHandles[i])
-	    break;
-	}
-    if (openHandles[i])
-	return -1;
-
-    /* Find the open flags to use */
-    if (_oflag & ___O_TRUNC)
-	strcpy(mode,"w");
-    else if (_oflag & ___O_CREAT)
-	strcpy(mode,"a");
-    else
-	strcpy(mode,"r");
-    if (_oflag & ___O_BINARY)
-	strcat(mode,"b");
-    if (_oflag & ___O_TEXT)
-	strcat(mode,"t");
-
-    /* Open the file and store the file handle */
-    if ((openHandles[i] = fopen(_path,mode)) == NULL)
-	return -1;
-    return i;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return -1; }
-
-int _CDECL stub_close(int _fildes)
-{
-    if (_fildes >= 3 && openHandles[_fildes]) {
-	fclose(openHandles[_fildes]);
-	openHandles[_fildes] = NULL;
-	}
-    return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
-    if (_fildes >= 3) {
-	fseek(openHandles[_fildes],_offset,_whence);
-	return ftell(openHandles[_fildes]);
-	}
-    return 0;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
-    if (_fildes >= 3)
-	return fread(_buf,1,_nbyte,openHandles[_fildes]);
-    return 0;
-}
-
-int _CDECL stub_unlink(const char *_path)
-{
-    WORD error;
-
-    if (initComplete) {
-	if (R0_DeleteFile((char*)_path,0,&error))
-	    return 0;
-	return -1;
-	}
-    else
-	return i_remove(_path);
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
-    if (_fildes >= 3)
-	return fwrite(_buf,1,_nbyte,openHandles[_fildes]);
-    return _nbyte;
-}
-
-int _CDECL stub_isatty(int _fildes)
-{ return 0; }
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return stub_unlink(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{ return -1; }
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
-    WORD error;
-    if (initComplete)
-	R0_SetFileAttributes((char*)filename,attrib,&error);
-}
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
-    DWORD   date;
-    VTD_Get_Date_And_Time(&date);
-    return date;
-}
-
-#elif   defined(__NT_DRIVER__)
-
-#define USE_LOCAL_FILEIO
-#define USE_LOCAL_GETDATE
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
-    char    mode[10];
-    int     i;
-
-    /* Find an empty file handle to use */
-    for (i = 3; i < MAX_FILES; i++) {
-	if (!openHandles[i])
-	    break;
-	}
-    if (openHandles[i])
-	return -1;
-
-    /* Find the open flags to use */
-    if (_oflag & ___O_TRUNC)
-	strcpy(mode,"w");
-    else if (_oflag & ___O_CREAT)
-	strcpy(mode,"a");
-    else
-	strcpy(mode,"r");
-    if (_oflag & ___O_BINARY)
-	strcat(mode,"b");
-    if (_oflag & ___O_TEXT)
-	strcat(mode,"t");
-
-    /* Open the file and store the file handle */
-    if ((openHandles[i] = fopen(_path,mode)) == NULL)
-	return -1;
-    return i;
-}
-
-int _CDECL stub_close(int _fildes)
-{
-    if (_fildes >= 3 && openHandles[_fildes]) {
-	fclose(openHandles[_fildes]);
-	openHandles[_fildes] = NULL;
-	}
-    return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
-    if (_fildes >= 3) {
-	fseek(openHandles[_fildes],_offset,_whence);
-	return ftell(openHandles[_fildes]);
-	}
-    return 0;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
-    if (_fildes >= 3)
-	return fread(_buf,1,_nbyte,openHandles[_fildes]);
-    return 0;
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
-    if (_fildes >= 3)
-	return fwrite(_buf,1,_nbyte,openHandles[_fildes]);
-    return _nbyte;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return -1; }
-
-int _CDECL stub_isatty(int _fildes)
-{ return 0; }
-
-int _CDECL stub_unlink(const char *_path)
-{
-    /* TODO: Implement this! */
-    return -1;
-}
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return stub_unlink(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{
-    /* TODO: Implement this! */
-    return -1;
-}
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
-    uint _attr = 0;
-    if (attrib & __A_RDONLY)
-	_attr |= FILE_ATTRIBUTE_READONLY;
-    if (attrib & __A_HIDDEN)
-	_attr |= FILE_ATTRIBUTE_HIDDEN;
-    if (attrib & __A_SYSTEM)
-	_attr |= FILE_ATTRIBUTE_SYSTEM;
-    PM_setFileAttr(filename,_attr);
-}
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
-    TIME_FIELDS tm;
-    _int64      count,count_1_1_1980;
-
-    tm.Year         = 1980;
-    tm.Month        = 1;
-    tm.Day          = 1;
-    tm.Hour         = 0;
-    tm.Minute       = 0;
-    tm.Second       = 0;
-    tm.Milliseconds = 0;
-    tm.Weekday      = 0;
-    RtlTimeFieldsToTime(&tm,(PLARGE_INTEGER)&count_1_1_1980);
-    KeQuerySystemTime((PLARGE_INTEGER)&count);
-    return (ulong)( (count - count_1_1_1980) / ((_int64)24 * (_int64)3600 * (_int64)10000000) );
-}
-
-#elif   defined(__WINDOWS32__) || defined(__RTTARGET__)
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ SetFileAttributes((LPSTR)filename, (DWORD)attrib); }
-
-#elif   defined(__OS2__)
-
-#define USE_LOCAL_FILEIO
-
-#ifndef W_OK
-#define W_OK                    0x02
-#endif
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
-    FILESTATUS3 s;
-    if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s)))
-	return;
-    s.attrFile = attrib;
-    DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s),0L);
-}
-
-/* <libc/file.h> stub functions */
-
-#define BUF_SIZE    4096
-
-/* Note: the implementation of the standard Unix-ish handle-based I/O isn't
- *       complete - but that wasn't the intent either. Note also that we
- *       don't presently support text file I/O, so all text files end
- *       up in Unix format (and are not translated!).
- */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
-    HFILE   handle;
-    ULONG   error, actiontaken, openflag, openmode;
-    char    path[PM_MAX_PATH];
-
-    /* Determine open flags */
-    if (_oflag & ___O_CREAT) {
-	if (_oflag & ___O_EXCL)
-	    openflag = OPEN_ACTION_FAIL_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
-	else if (_oflag & ___O_TRUNC)
-	    openflag = OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
-	else
-	    openflag = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
-	}
-    else if (_oflag & ___O_TRUNC)
-	openflag = OPEN_ACTION_REPLACE_IF_EXISTS;
-    else
-	openflag = OPEN_ACTION_OPEN_IF_EXISTS;
-
-    /* Determine open mode flags */
-    if (_oflag & ___O_RDONLY)
-	openmode = OPEN_ACCESS_READONLY | OPEN_SHARE_DENYNONE;
-    else if (_oflag & ___O_WRONLY)
-	openmode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYWRITE;
-    else
-	openmode = OPEN_ACCESS_READWRITE | OPEN_SHARE_DENYWRITE;
-
-    /* Copy the path to a variable on the stack. We need to do this
-     * for OS/2 as when the drivers are loaded into shared kernel
-     * memory, we can't pass an address from that memory range to
-     * this function.
-     */
-    strcpy(path,_path);
-    if (DosOpen(path, &handle, &actiontaken, 0, FILE_NORMAL,
-	    openflag, openmode, NULL) != NO_ERROR)
-	return -1;
-
-    /* Handle append mode of operation */
-    if (_oflag & ___O_APPEND) {
-	if (DosSetFilePtr(handle, 0, FILE_END, &error) != NO_ERROR)
-	    return -1;
-	}
-    return handle;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{
-    char        path[PM_MAX_PATH];
-    FILESTATUS  fs;
-
-    /* Copy the path to a variable on the stack. We need to do this
-     * for OS/2 as when the drivers are loaded into shared kernel
-     * memory, we can't pass an address from that memory range to
-     * this function.
-     */
-    strcpy(path,_path);
-    if (DosQueryPathInfo(path, FIL_STANDARD, &fs, sizeof(fs)) != NO_ERROR)
-	return -1;
-    if ((_amode & W_OK) && (fs.attrFile & FILE_READONLY))
-	return -1;
-    return 0;
-}
-
-int _CDECL stub_close(int _fildes)
-{
-    if (DosClose(_fildes) != NO_ERROR)
-	return -1;
-    return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
-    ULONG  cbActual, origin;
-
-    switch (_whence) {
-	case SEEK_CUR:
-	    origin = FILE_CURRENT;
-	    break;
-	case SEEK_END:
-	    origin = FILE_END;
-	    break;
-	default:
-	    origin = FILE_BEGIN;
-	}
-    if (DosSetFilePtr(_fildes, _offset, origin, &cbActual) != NO_ERROR)
-	return -1;
-    return cbActual;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
-    ULONG   cbActual = 0,cbRead;
-    uchar   *p = _buf;
-    uchar   file_io_buf[BUF_SIZE];
-
-    /* We need to perform the physical read in chunks into a
-     * a temporary static buffer, since the buffer passed in may be
-     * in kernel space and will cause DosRead to bail internally.
-     */
-    while (_nbyte > BUF_SIZE) {
-	if (DosRead(_fildes, file_io_buf, BUF_SIZE, &cbRead) != NO_ERROR)
-	    return -1;
-	cbActual += cbRead;
-	memcpy(p,file_io_buf,BUF_SIZE);
-	p += BUF_SIZE;
-	_nbyte -= BUF_SIZE;
-	}
-    if (_nbyte) {
-	if (DosRead(_fildes, file_io_buf, _nbyte, &cbRead) != NO_ERROR)
-	    return -1;
-	cbActual += cbRead;
-	memcpy(p,file_io_buf,_nbyte);
-	}
-    return cbActual;
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
-    ULONG   cbActual = 0,cbWrite;
-    uchar   *p = (PVOID)_buf;
-    uchar   file_io_buf[BUF_SIZE];
-
-    /* We need to perform the physical write in chunks from a
-     * a temporary static buffer, since the buffer passed in may be
-     * in kernel space and will cause DosWrite to bail internally.
-     */
-    while (_nbyte > BUF_SIZE) {
-	memcpy(file_io_buf,p,BUF_SIZE);
-	if (DosWrite(_fildes, file_io_buf, BUF_SIZE, &cbWrite) != NO_ERROR)
-	    return -1;
-	cbActual += cbWrite;
-	p += BUF_SIZE;
-	_nbyte -= BUF_SIZE;
-	}
-    if (_nbyte) {
-	memcpy(file_io_buf,p,_nbyte);
-	if (DosWrite(_fildes, file_io_buf, _nbyte, &cbWrite) != NO_ERROR)
-	    return -1;
-	cbActual += cbWrite;
-	}
-    return cbActual;
-}
-
-int _CDECL stub_unlink(const char *_path)
-{
-    char    path[PM_MAX_PATH];
-
-    /* Copy the path to a variable on the stack. We need to do this
-     * for OS/2 as when the drivers are loaded into shared kernel
-     * memory, we can't pass an address from that memory range to
-     * this function.
-     */
-    strcpy(path,_path);
-    if (DosDelete(path) != NO_ERROR)
-	return -1;
-    return 0;
-}
-
-int _CDECL stub_isatty(int _fildes)
-{
-    ULONG  htype, flags;
-
-    if (DosQueryHType(_fildes, &htype, &flags) != NO_ERROR)
-	return 0;
-    return ((htype & 0xFF) == HANDTYPE_DEVICE);
-}
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_path)
-{
-    char    path[PM_MAX_PATH];
-
-    /* Copy the path to a variable on the stack. We need to do this
-     * for OS/2 as when the drivers are loaded into shared kernel
-     * memory, we can't pass an address from that memory range to
-     * this function.
-     */
-    strcpy(path,_path);
-    if (DosDelete(path) != NO_ERROR)
-	return -1;
-    return 0;
-}
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{
-    char    old[PM_MAX_PATH];
-    char    new[PM_MAX_PATH];
-
-    /* Copy the path to a variable on the stack. We need to do this
-     * for OS/2 as when the drivers are loaded into shared kernel
-     * memory, we can't pass an address from that memory range to
-     * this function.
-     */
-    strcpy(old,_old);
-    strcpy(new,_new);
-    if (DosMove(old, new) != NO_ERROR)
-	return -1;
-    return 0;
-}
-
-#else
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ /* Unable to set hidden, system attributes on Unix. */ }
-
-#endif
-
-#ifndef USE_LOCAL_FILEIO
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
-    int oflag_tab[] = {
-	___O_RDONLY,    O_RDONLY,
-	___O_WRONLY,    O_WRONLY,
-	___O_RDWR,      O_RDWR,
-	___O_BINARY,    O_BINARY,
-	___O_TEXT,      O_TEXT,
-	___O_CREAT,     O_CREAT,
-	___O_EXCL,      O_EXCL,
-	___O_TRUNC,     O_TRUNC,
-	___O_APPEND,    O_APPEND,
-	};
-    int i,oflag = 0;
-
-    /* Translate the oflag's to the OS dependent versions */
-    for (i = 0; i < sizeof(oflag_tab) / sizeof(int); i += 2) {
-	if (_oflag & oflag_tab[i])
-	    oflag |= oflag_tab[i+1];
-	}
-    return open(_path,oflag,_mode);
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return access(_path,_amode); }
-
-int _CDECL stub_close(int _fildes)
-{ return close(_fildes); }
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{ return lseek(_fildes,_offset,_whence); }
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{ return read(_fildes,_buf,_nbyte); }
-
-int _CDECL stub_unlink(const char *_path)
-{ return unlink(_path); }
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{ return write(_fildes,_buf,_nbyte); }
-
-int _CDECL stub_isatty(int _fildes)
-{ return isatty(_fildes); }
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return remove(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{ return rename(_old,_new); }
-
-#endif
-
-#ifndef USE_LOCAL_GETDATE
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
-    struct tm refTime;
-    refTime.tm_year = 80;
-    refTime.tm_mon  = 0;
-    refTime.tm_mday = 1;
-    refTime.tm_hour = 0;
-    refTime.tm_min  = 0;
-    refTime.tm_sec  = 0;
-    refTime.tm_isdst = -1;
-    return (time(NULL) - mktime(&refTime)) / (24 * 3600L);
-}
-
-#endif
-
-int _CDECL stub_raise(int sig)
-{
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__)
-    return -1;
-#else
-    return raise(sig);
-#endif
-}
-
-#ifdef __WINDOWS32__
-typedef void (*__code_ptr)(int);
-#else
-typedef void (*__code_ptr)();
-#endif
-
-void * _CDECL stub_signal(int sig, void *handler)
-{
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__)
-    return NULL;
-#else
-    return (void*)signal(sig,(__code_ptr)handler);
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/makefile b/board/MAI/bios_emulator/scitech/src/common/makefile
deleted file mode 100644
index 5aac0381b3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#############################################################################
-#
-#                   Copyright (C) 1996 SciTech Software.
-#                           All rights reserved.
-#
-# Descripton:   Makefile for UniVBE(tm), UniPOWER(tm), UVBELib(tm) and
-#               DPMSLib library files. Requires Borland C++ 4.52 to build
-#               some components.
-#
-# $Date: 2002/10/02 15:35:20 $ $Author: hfrieden $
-#
-#############################################################################
-
-CFLAGS += -DTESTING_GTF
-
-gtfcalc$E:  gtfcalc$O
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/common/peloader.c b/board/MAI/bios_emulator/scitech/src/common/peloader.c
deleted file mode 100644
index a134bb012f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/peloader.c
+++ /dev/null
@@ -1,586 +0,0 @@
-/****************************************************************************
-*
-*                       SciTech MGL Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module to implement a simple Portable Binary DLL loader
-*               library. This library can be used to load PE DLL's under
-*               any Intel based OS, provided the DLL's do not have any
-*               imports in the import table.
-*
-*               NOTE: This loader module expects the DLL's to be built with
-*                     Watcom C++ and may produce unexpected results with
-*                     DLL's linked by another compiler.
-*
-****************************************************************************/
-
-#include "drvlib/peloader.h"
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "drvlib/libc/init.h"
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-#include "drvlib/pe.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int          result = PE_ok;
-
-/*------------------------- Implementation --------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-f           - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function is the
-same as the regular PE_loadLibrary except that it take a handle to an
-open file and an offset within that file for the DLL to load.
-****************************************************************************/
-static int PE_readHeader(
-    FILE *f,
-    long startOffset,
-    FILE_HDR *filehdr,
-    OPTIONAL_HDR *opthdr)
-{
-    EXE_HDR exehdr;
-    ulong   offset,signature;
-
-    /* Read the EXE header and check for valid header signature */
-    result = PE_invalidDLLImage;
-    fseek(f, startOffset, SEEK_SET);
-    if (fread(&exehdr, 1, sizeof(exehdr), f) != sizeof(exehdr))
-	return false;
-    if (exehdr.signature != 0x5A4D)
-	return false;
-
-    /* Now seek to the start of the PE header defined at offset 0x3C
-     * in the MS-DOS EXE header, and read the signature and check it.
-     */
-    fseek(f, startOffset+0x3C, SEEK_SET);
-    if (fread(&offset, 1, sizeof(offset), f) != sizeof(offset))
-	return false;
-    fseek(f, startOffset+offset, SEEK_SET);
-    if (fread(&signature, 1, sizeof(signature), f) != sizeof(signature))
-	return false;
-    if (signature != 0x00004550)
-	return false;
-
-    /* Now read the PE file header and check that it is correct */
-    if (fread(filehdr, 1, sizeof(*filehdr), f) != sizeof(*filehdr))
-	return false;
-    if (filehdr->Machine != IMAGE_FILE_MACHINE_I386)
-	return false;
-    if (!(filehdr->Characteristics & IMAGE_FILE_32BIT_MACHINE))
-	return false;
-    if (!(filehdr->Characteristics & IMAGE_FILE_DLL))
-	return false;
-    if (fread(opthdr, 1, sizeof(*opthdr), f) != sizeof(*opthdr))
-	return false;
-    if (opthdr->Magic != 0x10B)
-	return false;
-
-    /* Success, so return true! */
-    return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-f           - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-
-RETURNS:
-Size of the DLL file on disk, or -1 on error
-
-REMARKS:
-This function scans the headers for a Portable Binary DLL to determine the
-length of the DLL file on disk.
-{secret}
-****************************************************************************/
-ulong PEAPI PE_getFileSize(
-    FILE *f,
-    ulong startOffset)
-{
-    FILE_HDR        filehdr;
-    OPTIONAL_HDR    opthdr;
-    SECTION_HDR     secthdr;
-    ulong           size;
-    int             i;
-
-    /* Read the PE file headers from disk */
-    if (!PE_readHeader(f,startOffset,&filehdr,&opthdr))
-	return 0xFFFFFFFF;
-
-    /* Scan all the section headers summing up the total size */
-    size = opthdr.SizeOfHeaders;
-    for (i = 0; i < filehdr.NumberOfSections; i++) {
-	if (fread(&secthdr, 1, sizeof(secthdr), f) != sizeof(secthdr))
-	    return 0xFFFFFFFF;
-	size += secthdr.SizeOfRawData;
-	}
-    return size;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory from an open file
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-f           - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-size        - Place to store the size of the driver loaded
-shared      - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function is the
-same as the regular PE_loadLibrary except that it take a handle to an
-open file and an offset within that file for the DLL to load.
-
-SEE ALSO:
-PE_loadLibrary, PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibraryExt(
-    FILE *f,
-    ulong startOffset,
-    ulong *size,
-    ibool shared)
-{
-    FILE_HDR        filehdr;
-    OPTIONAL_HDR    opthdr;
-    SECTION_HDR     secthdr;
-    ulong           offset,pageOffset;
-    ulong           text_off,text_addr,text_size;
-    ulong           data_off,data_addr,data_size,data_end;
-    ulong           export_off,export_addr,export_size,export_end;
-    ulong           reloc_off,reloc_size;
-    ulong           image_size;
-    int             i,delta,numFixups;
-    ushort          relocType,*fixup;
-    PE_MODULE       *hMod = NULL;
-    void            *reloc = NULL;
-    BASE_RELOCATION *baseReloc;
-    InitLibC_t      InitLibC;
-
-    /* Read the PE file headers from disk */
-    if (!PE_readHeader(f,startOffset,&filehdr,&opthdr))
-	return NULL;
-
-    /* Scan all the section headers and find the necessary sections */
-    text_off = data_off = reloc_off = export_off = 0;
-    text_addr = text_size = 0;
-    data_addr = data_size = data_end = 0;
-    export_addr = export_size = export_end = 0;
-    reloc_size = 0;
-    for (i = 0; i < filehdr.NumberOfSections; i++) {
-	if (fread(&secthdr, 1, sizeof(secthdr), f) != sizeof(secthdr))
-	    goto Error;
-	if (strcmp(secthdr.Name, ".edata") == 0 || strcmp(secthdr.Name, ".rdata") == 0) {
-	    /* Exports section */
-	    export_off = secthdr.PointerToRawData;
-	    export_addr = secthdr.VirtualAddress;
-	    export_size = secthdr.SizeOfRawData;
-	    export_end = export_addr + export_size;
-	    }
-	else if (strcmp(secthdr.Name, ".idata") == 0) {
-	    /* Imports section, ignore */
-	    }
-	else if (strcmp(secthdr.Name, ".reloc") == 0) {
-	    /* Relocations section */
-	    reloc_off = secthdr.PointerToRawData;
-	    reloc_size = secthdr.SizeOfRawData;
-	    }
-	else if (!text_off && secthdr.Characteristics & IMAGE_SCN_CNT_CODE) {
-	    /* Code section */
-	    text_off = secthdr.PointerToRawData;
-	    text_addr = secthdr.VirtualAddress;
-	    text_size = secthdr.SizeOfRawData;
-	    }
-	else if (!data_off && secthdr.Characteristics & IMAGE_SCN_CNT_INITIALIZED_DATA) {
-	    /* Data section */
-	    data_off = secthdr.PointerToRawData;
-	    data_addr = secthdr.VirtualAddress;
-	    data_size = secthdr.SizeOfRawData;
-	    data_end = data_addr + data_size;
-	    }
-	}
-
-    /* Check to make sure that we have all the sections we need */
-    if (!text_off || !data_off || !export_off || !reloc_off) {
-	result = PE_invalidDLLImage;
-	goto Error;
-	}
-
-    /* Find the size of the image to load allocate memory for it */
-    image_size = MAX(export_end,data_end) - text_addr;
-    *size = sizeof(PE_MODULE) + image_size + 4096;
-    if (shared)
-	hMod = PM_mallocShared(*size);
-    else
-	hMod = PM_malloc(*size);
-    reloc = PM_malloc(reloc_size);
-    if (!hMod || !reloc) {
-	result = PE_outOfMemory;
-	goto Error;
-	}
-
-    hMod->text = (uchar*)ROUND_4K((ulong)hMod + sizeof(PE_MODULE));
-    hMod->data = (uchar*)((ulong)hMod->text + (data_addr - text_addr));
-    hMod->export = (uchar*)((ulong)hMod->text + (export_addr - text_addr));
-    hMod->textBase = text_addr;
-    hMod->dataBase = data_addr;
-    hMod->exportBase = export_addr;
-    hMod->exportDir = opthdr.DataDirectory[0].RelVirtualAddress - export_addr;
-    hMod->shared = shared;
-
-    /* Now read the section images from disk */
-    result = PE_invalidDLLImage;
-    fseek(f, startOffset+text_off, SEEK_SET);
-    if (fread(hMod->text, 1, text_size, f) != text_size)
-	goto Error;
-    fseek(f, startOffset+data_off, SEEK_SET);
-    if (fread(hMod->data, 1, data_size, f) != data_size)
-	goto Error;
-    fseek(f, startOffset+export_off, SEEK_SET);
-    if (fread(hMod->export, 1, export_size, f) != export_size)
-	goto Error;
-    fseek(f, startOffset+reloc_off, SEEK_SET);
-    if (fread(reloc, 1, reloc_size, f) != reloc_size)
-	goto Error;
-
-    /* Now perform relocations on all sections in the image */
-    delta = (ulong)hMod->text - opthdr.ImageBase - text_addr;
-    baseReloc = (BASE_RELOCATION*)reloc;
-    for (;;) {
-	/* Check for termination condition */
-	if (!baseReloc->PageRVA || !baseReloc->BlockSize)
-	    break;
-
-	/* Do fixups */
-	pageOffset = baseReloc->PageRVA - hMod->textBase;
-	numFixups = (baseReloc->BlockSize - sizeof(BASE_RELOCATION)) / sizeof(ushort);
-	fixup = (ushort*)(baseReloc + 1);
-	for (i = 0; i < numFixups; i++) {
-	    relocType = *fixup >> 12;
-	    if (relocType) {
-		offset = pageOffset + (*fixup & 0x0FFF);
-		*(ulong*)(hMod->text + offset) += delta;
-		}
-	    fixup++;
-	    }
-
-	/* Move to next relocation block */
-	baseReloc = (BASE_RELOCATION*)((ulong)baseReloc + baseReloc->BlockSize);
-	}
-
-    /* Initialise the C runtime library for the loaded DLL */
-    result = PE_unableToInitLibC;
-    if ((InitLibC = (InitLibC_t)PE_getProcAddress(hMod,"_InitLibC")) == NULL)
-	goto Error;
-    if (!InitLibC(&___imports,PM_getOSType()))
-	goto Error;
-
-    /* Clean up, close the file and return the loaded module handle */
-    PM_free(reloc);
-    result = PE_ok;
-    return hMod;
-
-Error:
-    if (shared)
-	PM_freeShared(hMod);
-    else
-	PM_free(hMod);
-    PM_free(reloc);
-    return NULL;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-szDLLName   - Name of the PE DLL library to load
-shared      - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function
-will only work on DLL's that do not have any imports, since we don't
-resolve import dependencies in this function.
-
-SEE ALSO:
-PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibrary(
-    const char *szDLLName,
-    ibool shared)
-{
-    PE_MODULE   *hMod;
-
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
-    if (!shared) {
-	PM_MODULE       hInst;
-	InitLibC_t      InitLibC;
-
-	/* For Win32 if are building checked libraries for debugging, we use
-	 * the real Win32 DLL functions so that we can debug the resulting DLL
-	 * files with the Win32 debuggers. Note that we can't do this if
-	 * we need to load the files into a shared memory context.
-	 */
-	if ((hInst = PM_loadLibrary(szDLLName)) == NULL) {
-	    result = PE_fileNotFound;
-	    return NULL;
-	    }
-
-	/* Initialise the C runtime library for the loaded DLL */
-	result = PE_unableToInitLibC;
-	if ((InitLibC = (void*)PM_getProcAddress(hInst,"_InitLibC")) == NULL)
-	    return NULL;
-	if (!InitLibC(&___imports,PM_getOSType()))
-	    return NULL;
-
-	/* Allocate the PE_MODULE structure */
-	if ((hMod = PM_malloc(sizeof(*hMod))) == NULL)
-	    return NULL;
-	hMod->text = (void*)hInst;
-	hMod->shared = -1;
-
-	/* DLL loaded successfully so return module handle */
-	result = PE_ok;
-	return hMod;
-	}
-    else
-#endif
-	{
-	FILE        *f;
-	ulong       size;
-
-	/* Attempt to open the file on disk */
-	if (shared < 0)
-	    shared = 0;
-	if ((f = fopen(szDLLName,"rb")) == NULL) {
-	    result = PE_fileNotFound;
-	    return NULL;
-	    }
-	hMod = PE_loadLibraryExt(f,0,&size,shared);
-	fclose(f);
-	return hMod;
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-szDLLName   - Name of the PE DLL library to load
-shared      - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function is the same as the regular PE_loadLibrary function, except
-that it looks for the drivers in the MGL_ROOT/drivers directory or a
-/drivers directory relative to the current directory.
-
-SEE ALSO:
-PE_loadLibraryMGL, PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibraryMGL(
-    const char *szDLLName,
-    ibool shared)
-{
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
-    PE_MODULE   *hMod;
-#endif
-    char        path[256] = "";
-
-    /* We look in the 'drivers' directory, optionally under the MGL_ROOT
-     * environment variable directory.
-     */
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
-    if (getenv("MGL_ROOT")) {
-	strcpy(path,getenv("MGL_ROOT"));
-	PM_backslash(path);
-	}
-    strcat(path,"drivers");
-    PM_backslash(path);
-    strcat(path,szDLLName);
-    if ((hMod = PE_loadLibrary(path,shared)) != NULL)
-	return hMod;
-#endif
-    strcpy(path,"drivers");
-    PM_backslash(path);
-    strcat(path,szDLLName);
-    return PE_loadLibrary(path,shared);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Gets a function address from a Portable Binary DLL
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-hModule     - Handle to a loaded PE DLL library
-szProcName  - Name of the function to get the address of
-
-RETURNS:
-Pointer to the function, or NULL on failure.
-
-REMARKS:
-This function searches for the named, exported function in a loaded PE
-DLL library, and returns the address of the function. If the function is
-not found in the library, this function return NULL.
-
-SEE ALSO:
-PE_loadLibrary, PE_freeLibrary
-****************************************************************************/
-void * PEAPI PE_getProcAddress(
-    PE_MODULE *hModule,
-    const char *szProcName)
-{
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
-    if (hModule->shared == -1)
-	return (void*)PM_getProcAddress(hModule->text,szProcName);
-    else
-#endif
-	{
-	uint                i;
-	EXPORT_DIRECTORY    *exports;
-	ulong               funcOffset;
-	ulong               *AddressTable;
-	ulong               *NameTable;
-	ushort              *OrdinalTable;
-	char                *name;
-
-	/* Find the address of the export tables from the export section */
-	if (!hModule)
-	    return NULL;
-	exports = (EXPORT_DIRECTORY*)(hModule->export + hModule->exportDir);
-	AddressTable = (ulong*)(hModule->export + exports->AddressTableRVA - hModule->exportBase);
-	NameTable = (ulong*)(hModule->export + exports->NameTableRVA - hModule->exportBase);
-	OrdinalTable = (ushort*)(hModule->export + exports->OrdinalTableRVA - hModule->exportBase);
-
-	/* Search the export name table to find the function name */
-	for (i = 0; i < exports->NumberOfNamePointers; i++) {
-	    name = (char*)(hModule->export + NameTable[i] - hModule->exportBase);
-	    if (strcmp(name,szProcName) == 0)
-		break;
-	    }
-	if (i == exports->NumberOfNamePointers)
-	    return NULL;
-	funcOffset = AddressTable[OrdinalTable[i]];
-	if (!funcOffset)
-	    return NULL;
-	return (void*)(hModule->text + funcOffset - hModule->textBase);
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Frees a loaded Portable Binary DLL
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-hModule     - Handle to a loaded PE DLL library to free
-
-REMARKS:
-This function frees a loaded PE DLL library from memory.
-
-SEE ALSO:
-PE_getProcAddress, PE_loadLibrary
-****************************************************************************/
-void PEAPI PE_freeLibrary(
-    PE_MODULE *hModule)
-{
-    TerminateLibC_t TerminateLibC;
-
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
-    if (hModule->shared == -1) {
-	/* Run the C runtime library exit code on module unload */
-	if ((TerminateLibC = (TerminateLibC_t)PM_getProcAddress(hModule->text,"_TerminateLibC")) != NULL)
-	    TerminateLibC();
-	PM_freeLibrary(hModule->text);
-	PM_free(hModule);
-	}
-    else
-#endif
-	{
-	if (hModule) {
-	    /* Run the C runtime library exit code on module unload */
-	    if ((TerminateLibC = (TerminateLibC_t)PE_getProcAddress(hModule,"_TerminateLibC")) != NULL)
-		TerminateLibC();
-	    if (hModule->shared)
-		PM_freeShared(hModule);
-	    else
-		PM_free(hModule);
-	    }
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the error code for the last operation
-
-HEADER:
-peloader.h
-
-RETURNS:
-Error code for the last operation.
-
-SEE ALSO:
-PE_getProcAddress, PE_loadLibrary
-****************************************************************************/
-int PEAPI PE_getError(void)
-{
-    return result;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/vesavbe.c b/board/MAI/bios_emulator/scitech/src/common/vesavbe.c
deleted file mode 100644
index a669e5c292..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/vesavbe.c
+++ /dev/null
@@ -1,1214 +0,0 @@
-/****************************************************************************
-*
-*           The SuperVGA Kit - UniVBE Software Development Kit
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  IBM PC Real Mode and 16/32 bit Protected Mode.
-*
-* Description:  Module to implement a C callable interface to the standard
-*               VESA VBE routines. You should rip out this module and use it
-*               directly in your own applications, or you can use the
-*               high level SDK functions.
-*
-*               MUST be compiled in the LARGE or FLAT models.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "vesavbe.h"
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#define VBE_SUCCESS     0x004F
-#define MAX_LIN_PTRS    10
-
-static uint         VESABuf_len = 1024;/* Length of the VESABuf buffer  */
-static ibool        haveRiva128;    /* True if we have a Riva128        */
-static VBE_state    defState = {0}; /* Default state buffer             */
-static VBE_state    *state = &defState; /* Pointer to current buffer    */
-static int          VBE_shared = 0;
-#ifndef REALMODE
-static char         localBuf[512];  /* Global PM string translate buf   */
-#define MAX_LOCAL_BUF &localBuf[511]
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* static function in WinDirect for passing 32-bit registers to BIOS */
-int PMAPI WD_int386(int intno, RMREGS *in, RMREGS *out);
-
-void VBEAPI VBE_init(void)
-/****************************************************************************
-*
-* Function:     VBE_init
-*
-* Description:  Initialises the VBE transfer buffer in real mode DC.memory.
-*               This routine is called by the VESAVBE module every time
-*               it needs to use the transfer buffer, so we simply allocate
-*               it once and then return.
-*
-****************************************************************************/
-{
-    if (!state->VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((state->VESABuf_ptr = PM_getVESABuf(&VESABuf_len, &state->VESABuf_rseg, &state->VESABuf_roff)) == NULL)
-	    PM_fatalError("VESAVBE.C: Real mode memory allocation failed!");
-	}
-}
-
-void * VBEAPI VBE_getRMBuf(uint *len,uint *rseg,uint *roff)
-/****************************************************************************
-*
-* Function:     VBE_getRMBuf
-*
-* Description:  This function returns the location and length of the real
-*               mode memory buffer for calling real mode functions.
-*
-****************************************************************************/
-{
-    *len = VESABuf_len;
-    *rseg = state->VESABuf_rseg;
-    *roff = state->VESABuf_roff;
-    return state->VESABuf_ptr;
-}
-
-void VBEAPI VBE_setStateBuffer(VBE_state *s)
-/****************************************************************************
-*
-* Function:     VBE_setStateBuffer
-*
-* Description:  This functions sets the internal state buffer for the
-*               VBE module to the passed in buffer. By default the internal
-*               global buffer is used, but you must use separate buffers
-*               for each device in a multi-controller environment.
-*
-****************************************************************************/
-{
-    state = s;
-}
-
-void VBEAPI VBE_callESDI(RMREGS *regs, void *buffer, int size)
-/****************************************************************************
-*
-* Function:     VBE_callESDI
-* Parameters:   regs    - Registers to load when calling VBE
-*               buffer  - Buffer to copy VBE info block to
-*               size    - Size of buffer to fill
-*
-* Description:  Calls the VESA VBE and passes in a buffer for the VBE to
-*               store information in, which is then copied into the users
-*               buffer space. This works in protected mode as the buffer
-*               passed to the VESA VBE is allocated in conventional
-*               memory, and is then copied into the users memory block.
-*
-****************************************************************************/
-{
-    RMSREGS sregs;
-
-    if (!state->VESABuf_ptr)
-	PM_fatalError("You *MUST* call VBE_init() before you can call the VESAVBE.C module!");
-    sregs.es = (ushort)state->VESABuf_rseg;
-    regs->x.di = (ushort)state->VESABuf_roff;
-    memcpy(state->VESABuf_ptr, buffer, size);
-    PM_int86x(0x10, regs, regs, &sregs);
-    memcpy(buffer, state->VESABuf_ptr, size);
-}
-
-#ifndef REALMODE
-static char *VBE_copyStrToLocal(char *p,char *realPtr,char *max)
-/****************************************************************************
-*
-* Function:     VBE_copyStrToLocal
-* Parameters:   p       - Flat model buffer to copy to
-*               realPtr - Real mode pointer to copy
-* Returns:      Pointer to the next byte after string
-*
-* Description:  Copies the string from the real mode location pointed to
-*               by 'realPtr' into the flat model buffer pointed to by
-*               'p'. We return a pointer to the next byte past the copied
-*               string.
-*
-****************************************************************************/
-{
-    uchar   *v;
-
-    v = PM_mapRealPointer((uint)((ulong)realPtr >> 16), (uint)((ulong)realPtr & 0xFFFF));
-    while (*v != 0 && p < max)
-	*p++ = *v++;
-    *p++ = 0;
-    return p;
-}
-
-static void VBE_copyShortToLocal(ushort *p,ushort *realPtr)
-/****************************************************************************
-*
-* Function:     VBE_copyShortToLocal
-* Parameters:   p       - Flat model buffer to copy to
-*               realPtr - Real mode pointer to copy
-*
-* Description:  Copies the mode table from real mode memory to the flat
-*               model buffer.
-*
-****************************************************************************/
-{
-    ushort  *v;
-
-    v = PM_mapRealPointer((uint)((ulong)realPtr >> 16),(uint)((ulong)realPtr & 0xFFFF));
-    while (*v != 0xFFFF)
-	*p++ = *v++;
-    *p = 0xFFFF;
-}
-#endif
-
-int VBEAPI VBE_detectEXT(VBE_vgaInfo *vgaInfo,ibool forceUniVBE)
-/****************************************************************************
-*
-* Function:     VBE_detect
-* Parameters:   vgaInfo - Place to store the VGA information block
-* Returns:      VBE version number, or 0 if not detected.
-*
-* Description:  Detects if a VESA VBE is out there and functioning
-*               correctly. If we detect a VBE interface we return the
-*               VGAInfoBlock returned by the VBE and the VBE version number.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F00;     /* Get SuperVGA information */
-    if (forceUniVBE) {
-	regs.x.bx = 0x1234;
-	regs.x.cx = 0x4321;
-	}
-    else {
-	regs.x.bx = 0;
-	regs.x.cx = 0;
-	}
-    strncpy(vgaInfo->VESASignature,"VBE2",4);
-    VBE_callESDI(&regs, vgaInfo, sizeof(*vgaInfo));
-    if (regs.x.ax != VBE_SUCCESS)
-	return 0;
-    if (strncmp(vgaInfo->VESASignature,"VESA",4) != 0)
-	return 0;
-
-    /* Check for bogus BIOSes that return a VBE version number that is
-     * not correct, and fix it up. We also check the OemVendorNamePtr for a
-     * valid value, and if it is invalid then we also reset to VBE 1.2.
-     */
-    if (vgaInfo->VESAVersion >= 0x200 && vgaInfo->OemVendorNamePtr == 0)
-	vgaInfo->VESAVersion = 0x102;
-#ifndef REALMODE
-    /* Relocate all the indirect information (mode tables, OEM strings
-     * etc) from the low 1Mb memory region into a static buffer in
-     * our default data segment. We do this to insulate the application
-     * from mapping the strings from real mode to protected mode.
-     */
-    {
-	char *p,*p2;
-     p2 = VBE_copyStrToLocal(localBuf,vgaInfo->OemStringPtr,MAX_LOCAL_BUF);
-     vgaInfo->OemStringPtr = localBuf;
-     if (vgaInfo->VESAVersion >= 0x200) {
-	 p = VBE_copyStrToLocal(p2,vgaInfo->OemVendorNamePtr,MAX_LOCAL_BUF);
-	 vgaInfo->OemVendorNamePtr = p2;
-	 p2 = VBE_copyStrToLocal(p,vgaInfo->OemProductNamePtr,MAX_LOCAL_BUF);
-	 vgaInfo->OemProductNamePtr = p;
-	 p = VBE_copyStrToLocal(p2,vgaInfo->OemProductRevPtr,MAX_LOCAL_BUF);
-	 vgaInfo->OemProductRevPtr = p2;
-	 VBE_copyShortToLocal((ushort*)p,vgaInfo->VideoModePtr);
-	 vgaInfo->VideoModePtr = (ushort*)p;
-	 }
-     else {
-	 VBE_copyShortToLocal((ushort*)p2,vgaInfo->VideoModePtr);
-	 vgaInfo->VideoModePtr = (ushort*)p2;
-	 }
-    }
-#endif
-    state->VBEMemory = vgaInfo->TotalMemory * 64;
-
-    /* Check for Riva128 based cards since they have broken triple buffering
-     * and stereo support.
-     */
-    haveRiva128 = false;
-    if (vgaInfo->VESAVersion >= 0x300 &&
-	   (strstr(vgaInfo->OemStringPtr,"NVidia") != NULL ||
-	    strstr(vgaInfo->OemStringPtr,"Riva") != NULL)) {
-	haveRiva128 = true;
-	}
-
-    /* Check for Matrox G400 cards which claim to be VBE 3.0
-     * compliant yet they don't implement the refresh rate control
-     * functions.
-     */
-    if (vgaInfo->VESAVersion >= 0x300 && (strcmp(vgaInfo->OemProductNamePtr,"Matrox G400") == 0))
-	vgaInfo->VESAVersion = 0x200;
-    return (state->VBEVersion = vgaInfo->VESAVersion);
-}
-
-int VBEAPI VBE_detect(VBE_vgaInfo *vgaInfo)
-/****************************************************************************
-*
-* Function:     VBE_detect
-* Parameters:   vgaInfo - Place to store the VGA information block
-* Returns:      VBE version number, or 0 if not detected.
-*
-* Description:  Detects if a VESA VBE is out there and functioning
-*               correctly. If we detect a VBE interface we return the
-*               VGAInfoBlock returned by the VBE and the VBE version number.
-*
-****************************************************************************/
-{
-    return VBE_detectEXT(vgaInfo,false);
-}
-
-ibool VBEAPI VBE_getModeInfo(int mode,VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function:     VBE_getModeInfo
-* Parameters:   mode        - VBE mode to get information for
-*               modeInfo    - Place to store VBE mode information
-* Returns:      True on success, false if function failed.
-*
-* Description:  Obtains information about a specific video mode from the
-*               VBE. You should use this function to find the video mode
-*               you wish to set, as the new VBE 2.0 mode numbers may be
-*               completely arbitrary.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-    int     bits;
-
-    regs.x.ax = 0x4F01;             /* Get mode information         */
-    regs.x.cx = (ushort)mode;
-    VBE_callESDI(&regs, modeInfo, sizeof(*modeInfo));
-    if (regs.x.ax != VBE_SUCCESS)
-	return false;
-    if ((modeInfo->ModeAttributes & vbeMdAvailable) == 0)
-	return false;
-
-    /* Map out triple buffer and stereo flags for NVidia Riva128
-     * chips.
-     */
-    if (haveRiva128) {
-	modeInfo->ModeAttributes &= ~vbeMdTripleBuf;
-	modeInfo->ModeAttributes &= ~vbeMdStereo;
-	}
-
-    /* Support old style RGB definitions for VBE 1.1 BIOSes */
-    bits = modeInfo->BitsPerPixel;
-    if (modeInfo->MemoryModel == vbeMemPK && bits > 8) {
-	modeInfo->MemoryModel = vbeMemRGB;
-	switch (bits) {
-	    case 15:
-		modeInfo->RedMaskSize = 5;
-		modeInfo->RedFieldPosition = 10;
-		modeInfo->GreenMaskSize = 5;
-		modeInfo->GreenFieldPosition = 5;
-		modeInfo->BlueMaskSize = 5;
-		modeInfo->BlueFieldPosition = 0;
-		modeInfo->RsvdMaskSize = 1;
-		modeInfo->RsvdFieldPosition = 15;
-		break;
-	    case 16:
-		modeInfo->RedMaskSize = 5;
-		modeInfo->RedFieldPosition = 11;
-		modeInfo->GreenMaskSize = 5;
-		modeInfo->GreenFieldPosition = 5;
-		modeInfo->BlueMaskSize = 5;
-		modeInfo->BlueFieldPosition = 0;
-		modeInfo->RsvdMaskSize = 0;
-		modeInfo->RsvdFieldPosition = 0;
-		break;
-	    case 24:
-		modeInfo->RedMaskSize = 8;
-		modeInfo->RedFieldPosition = 16;
-		modeInfo->GreenMaskSize = 8;
-		modeInfo->GreenFieldPosition = 8;
-		modeInfo->BlueMaskSize = 8;
-		modeInfo->BlueFieldPosition = 0;
-		modeInfo->RsvdMaskSize = 0;
-		modeInfo->RsvdFieldPosition = 0;
-		break;
-	    }
-	}
-
-    /* Convert the 32k direct color modes of VBE 1.2+ BIOSes to
-     * be recognised as 15 bits per pixel modes.
-     */
-    if (bits == 16 && modeInfo->RsvdMaskSize == 1)
-	modeInfo->BitsPerPixel = 15;
-
-    /* Fix up bogus BIOS'es that report incorrect reserved pixel masks
-     * for 32K color modes. Quite a number of BIOS'es have this problem,
-     * and this affects our OS/2 drivers in VBE fallback mode.
-     */
-    if (bits == 15 && (modeInfo->RsvdMaskSize != 1 || modeInfo->RsvdFieldPosition != 15)) {
-	modeInfo->RsvdMaskSize = 1;
-	modeInfo->RsvdFieldPosition = 15;
-	}
-    return true;
-}
-
-long VBEAPI VBE_getPageSize(VBE_modeInfo *mi)
-/****************************************************************************
-*
-* Function:     VBE_getPageSize
-* Parameters:   mi  - Pointer to mode information block
-* Returns:      Caculated page size in bytes rounded to correct boundary
-*
-* Description:  Computes the page size in bytes for the specified mode
-*               information block, rounded up to the appropriate boundary
-*               (8k, 16k, 32k or 64k). Pages >= 64k in size are always
-*               rounded to the nearest 64k boundary (so the start of a
-*               page is always bank aligned).
-*
-****************************************************************************/
-{
-    long size;
-
-    size = (long)mi->BytesPerScanLine * (long)mi->YResolution;
-    if (mi->BitsPerPixel == 4) {
-	/* We have a 16 color video mode, so round up the page size to
-	 * 8k, 16k, 32k or 64k boundaries depending on how large it is.
-	 */
-
-	size = (size + 0x1FFFL) & 0xFFFFE000L;
-	if (size != 0x2000) {
-	    size = (size + 0x3FFFL) & 0xFFFFC000L;
-	    if (size != 0x4000) {
-		size = (size + 0x7FFFL) & 0xFFFF8000L;
-		if (size != 0x8000)
-		    size = (size + 0xFFFFL) & 0xFFFF0000L;
-		}
-	    }
-	}
-    else size = (size + 0xFFFFL) & 0xFFFF0000L;
-    return size;
-}
-
-ibool VBEAPI VBE_setVideoModeExt(int mode,VBE_CRTCInfo *crtc)
-/****************************************************************************
-*
-* Function:     VBE_setVideoModeExt
-* Parameters:   mode    - SuperVGA video mode to set.
-* Returns:      True if the mode was set, false if not.
-*
-* Description:  Attempts to set the specified video mode. This version
-*               includes support for the VBE/Core 3.0 refresh rate control
-*               mechanism.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion < 0x200 && mode < 0x100) {
-	/* Some VBE implementations barf terribly if you try to set non-VBE
-	 * video modes with the VBE set mode call. VBE 2.0 implementations
-	 * must be able to handle this.
-	 */
-	regs.h.al = (ushort)mode;
-	regs.h.ah = 0;
-	PM_int86(0x10,&regs,&regs);
-	}
-    else {
-	if (state->VBEVersion < 0x300 && (mode & vbeRefreshCtrl))
-	    return false;
-	regs.x.ax = 0x4F02;
-	regs.x.bx = (ushort)mode;
-	if ((mode & vbeRefreshCtrl) && crtc)
-	    VBE_callESDI(&regs, crtc, sizeof(*crtc));
-	else
-	    PM_int86(0x10,&regs,&regs);
-	if (regs.x.ax != VBE_SUCCESS)
-	    return false;
-	}
-    return true;
-}
-
-ibool VBEAPI VBE_setVideoMode(int mode)
-/****************************************************************************
-*
-* Function:     VBE_setVideoMode
-* Parameters:   mode    - SuperVGA video mode to set.
-* Returns:      True if the mode was set, false if not.
-*
-* Description:  Attempts to set the specified video mode.
-*
-****************************************************************************/
-{
-    return VBE_setVideoModeExt(mode,NULL);
-}
-
-int VBEAPI VBE_getVideoMode(void)
-/****************************************************************************
-*
-* Function:     VBE_getVideoMode
-* Returns:      Current video mode
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F03;
-    PM_int86(0x10,&regs,&regs);
-    if (regs.x.ax != VBE_SUCCESS)
-	return -1;
-    return regs.x.bx;
-}
-
-ibool VBEAPI VBE_setBank(int window,int bank)
-/****************************************************************************
-*
-* Function:     VBE_setBank
-* Parameters:   window  - Window to set
-*               bank    - Bank number to set window to
-* Returns:      True on success, false on failure.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F05;
-    regs.h.bh = 0;
-    regs.h.bl = window;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-int VBEAPI VBE_getBank(int window)
-/****************************************************************************
-*
-* Function:     VBE_setBank
-* Parameters:   window  - Window to read
-* Returns:      Bank number for the window (-1 on failure)
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F05;
-    regs.h.bh = 1;
-    regs.h.bl = window;
-    PM_int86(0x10,&regs,&regs);
-    if (regs.x.ax != VBE_SUCCESS)
-	return -1;
-    return regs.x.dx;
-}
-
-ibool VBEAPI VBE_setPixelsPerLine(int pixelsPerLine,int *newBytes,
-    int *newPixels,int *maxScanlines)
-/****************************************************************************
-*
-* Function:     VBE_setPixelsPerLine
-* Parameters:   pixelsPerLine   - Pixels per scanline
-*               newBytes        - Storage for bytes per line value set
-*               newPixels       - Storage for pixels per line value set
-*               maxScanLines    - Storage for maximum number of scanlines
-* Returns:      True on success, false on failure
-*
-* Description:  Sets the scanline length for the video mode to the specified
-*               number of pixels per scanline. If you need more granularity
-*               in TrueColor modes, use the VBE_setBytesPerLine routine
-*               (only valid for VBE 2.0).
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F06;
-    regs.h.bl = 0;
-    regs.x.cx = pixelsPerLine;
-    PM_int86(0x10,&regs,&regs);
-    *newBytes = regs.x.bx;
-    *newPixels = regs.x.cx;
-    *maxScanlines = regs.x.dx;
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setBytesPerLine(int bytesPerLine,int *newBytes,
-    int *newPixels,int *maxScanlines)
-/****************************************************************************
-*
-* Function:     VBE_setBytesPerLine
-* Parameters:   pixelsPerLine   - Pixels per scanline
-*               newBytes        - Storage for bytes per line value set
-*               newPixels       - Storage for pixels per line value set
-*               maxScanLines    - Storage for maximum number of scanlines
-* Returns:      True on success, false on failure
-*
-* Description:  Sets the scanline length for the video mode to the specified
-*               number of bytes per scanline (valid for VBE 2.0 only).
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F06;
-    regs.h.bl = 2;
-    regs.x.cx = bytesPerLine;
-    PM_int86(0x10,&regs,&regs);
-    *newBytes = regs.x.bx;
-    *newPixels = regs.x.cx;
-    *maxScanlines = regs.x.dx;
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getScanlineLength(int *bytesPerLine,int *pixelsPerLine,
-    int *maxScanlines)
-/****************************************************************************
-*
-* Function:     VBE_getScanlineLength
-* Parameters:   bytesPerLine    - Storage for bytes per scanline
-*               pixelsPerLine   - Storage for pixels per scanline
-*               maxScanLines    - Storage for maximum number of scanlines
-* Returns:      True on success, false on failure
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F06;
-    regs.h.bl = 1;
-    PM_int86(0x10,&regs,&regs);
-    *bytesPerLine = regs.x.bx;
-    *pixelsPerLine = regs.x.cx;
-    *maxScanlines = regs.x.dx;
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getMaxScanlineLength(int *maxBytes,int *maxPixels)
-/****************************************************************************
-*
-* Function:     VBE_getMaxScanlineLength
-* Parameters:   maxBytes    - Maximum scanline width in bytes
-*               maxPixels   - Maximum scanline width in pixels
-* Returns:      True if successful, false if function failed
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F06;
-    regs.h.bl = 3;
-    PM_int86(0x10,&regs,&regs);
-    *maxBytes = regs.x.bx;
-    *maxPixels = regs.x.cx;
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setDisplayStart(int x,int y,ibool waitVRT)
-/****************************************************************************
-*
-* Function:     VBE_setDisplayStart
-* Parameters:   x,y     - Position of the first pixel to display
-*               waitVRT - True to wait for retrace, false if not
-* Returns:      True if function was successful.
-*
-* Description:  Sets the new starting display position to implement
-*               hardware scrolling.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F07;
-    if (waitVRT)
-	regs.x.bx = 0x80;
-    else regs.x.bx = 0x00;
-    regs.x.cx = x;
-    regs.x.dx = y;
-    PM_int86(0x10,&regs,&regs);
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getDisplayStart(int *x,int *y)
-/****************************************************************************
-*
-* Function:     VBE_getDisplayStart
-* Parameters:   x,y - Place to store starting address value
-* Returns:      True if function was successful.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F07;
-    regs.x.bx = 0x01;
-    PM_int86(0x10,&regs,&regs);
-    *x = regs.x.cx;
-    *y = regs.x.dx;
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setDisplayStartAlt(ulong startAddr,ibool waitVRT)
-/****************************************************************************
-*
-* Function:     VBE_setDisplayStartAlt
-* Parameters:   startAddr   - 32-bit starting address in display memory
-*               waitVRT     - True to wait for vertical retrace, false if not
-* Returns:      True if function was successful, false if not supported.
-*
-* Description:  Sets the new starting display position to the specified
-*               32-bit display start address. Note that this function is
-*               different the the version above, since it takes a 32-bit
-*               byte offset in video memory as the starting address which
-*               gives the programmer maximum control over the stat address.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F07;
-	regs.x.bx = waitVRT ? 0x82 : 0x02;
-	regs.e.ecx = startAddr;
-	PM_int86(0x10,&regs,&regs);
-	return regs.x.ax == VBE_SUCCESS;
-	}
-    return false;
-}
-
-int VBEAPI VBE_getDisplayStartStatus(void)
-/****************************************************************************
-*
-* Function:     VBE_getDisplayStartStatus
-* Returns:      0 if last flip not occurred, 1 if already flipped
-*               -1 if not supported
-*
-* Description:  Returns the status of the previous display start request.
-*               If this function is supported the programmer can implement
-*               hardware triple buffering using this function.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F07;
-	regs.x.bx = 0x0004;
-	PM_int86(0x10,&regs,&regs);
-	if (regs.x.ax == VBE_SUCCESS)
-	    return (regs.x.cx != 0);
-	}
-    return -1;
-}
-
-ibool VBEAPI VBE_enableStereoMode(void)
-/****************************************************************************
-*
-* Function:     VBE_enableStereoMode
-* Returns:      True if stereo mode enabled, false if not supported.
-*
-* Description:  Puts the system into hardware stereo mode for LC shutter
-*               glasses, where the display swaps between two display start
-*               addresses every vertical retrace.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F07;
-	regs.x.bx = 0x0005;
-	PM_int86(0x10,&regs,&regs);
-	return regs.x.ax == VBE_SUCCESS;
-	}
-    return false;
-}
-
-ibool VBEAPI VBE_disableStereoMode(void)
-/****************************************************************************
-*
-* Function:     VBE_disableStereoMode
-* Returns:      True if stereo mode disabled, false if not supported.
-*
-* Description:  Puts the system back into normal, non-stereo display mode
-*               after having stereo mode enabled.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F07;
-	regs.x.bx = 0x0006;
-	PM_int86(0x10,&regs,&regs);
-	return regs.x.ax == VBE_SUCCESS;
-	}
-    return false;
-}
-
-ibool VBEAPI VBE_setStereoDisplayStart(ulong leftAddr,ulong rightAddr,
-    ibool waitVRT)
-/****************************************************************************
-*
-* Function:     VBE_setStereoDisplayStart
-* Parameters:   leftAddr    - 32-bit start address for left image
-*               rightAddr   - 32-bit start address for right image
-*               waitVRT     - True to wait for vertical retrace, false if not
-* Returns:      True if function was successful, false if not supported.
-*
-* Description:  Sets the new starting display position to the specified
-*               32-bit display start address. Note that this function is
-*               different the the version above, since it takes a 32-bit
-*               byte offset in video memory as the starting address which
-*               gives the programmer maximum control over the stat address.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F07;
-	regs.x.bx = waitVRT ? 0x83 : 0x03;
-	regs.e.ecx = leftAddr;
-	regs.e.edx = rightAddr;
-	PM_int86(0x10,&regs,&regs);
-	return regs.x.ax == VBE_SUCCESS;
-	}
-    return false;
-}
-
-ulong VBEAPI VBE_getClosestClock(ushort mode,ulong pixelClock)
-/****************************************************************************
-*
-* Function:     VBE_getClosestClock
-* Parameters:   mode        - VBE mode to be used (include vbeLinearBuffer)
-*               pixelClock  - Desired pixel clock
-* Returns:      Closest pixel clock to desired clock (-1 if not supported)
-*
-* Description:  Calls the VBE/Core 3.0 interface to determine the closest
-*               pixel clock to the requested value. The BIOS will always
-*               search for a pixel clock that is no more than 1% below the
-*               requested clock or somewhere higher than the clock. If the
-*               clock is higher note that it may well be many Mhz higher
-*               that requested and the application will have to check that
-*               the returned value is suitable for it's needs. This function
-*               returns the actual pixel clock that will be programmed by
-*               the hardware.
-*
-*               Note that if the pixel clock will be used with a linear
-*               framebuffer mode, make sure you pass in the linear
-*               framebuffer flag to this function.
-*
-*               NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    if (state->VBEVersion >= 0x300) {
-	regs.x.ax = 0x4F0B;
-	regs.h.bl = 0x00;
-	regs.e.ecx = pixelClock;
-	regs.x.dx = mode;
-	PM_int86(0x10,&regs,&regs);
-	if (regs.x.ax == VBE_SUCCESS)
-	    return regs.e.ecx;
-	}
-    return -1;
-}
-
-ibool VBEAPI VBE_setDACWidth(int width)
-/****************************************************************************
-*
-* Function:     VBE_setDACWidth
-* Parameters:   width   - Width to set the DAC to
-* Returns:      True on success, false on failure
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F08;
-    regs.h.bl = 0x00;
-    regs.h.bh = width;
-    PM_int86(0x10,&regs,&regs);
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-int VBEAPI VBE_getDACWidth(void)
-/****************************************************************************
-*
-* Function:     VBE_getDACWidth
-* Returns:      Current width of the palette DAC
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F08;
-    regs.h.bl = 0x01;
-    PM_int86(0x10,&regs,&regs);
-    if (regs.x.ax != VBE_SUCCESS)
-	return -1;
-    return regs.h.bh;
-}
-
-ibool VBEAPI VBE_setPalette(int start,int num,VBE_palette *pal,ibool waitVRT)
-/****************************************************************************
-*
-* Function:     VBE_setPalette
-* Parameters:   start   - Starting palette index to program
-*               num     - Number of palette indexes to program
-*               pal     - Palette buffer containing values
-*               waitVRT - Wait for vertical retrace flag
-* Returns:      True on success, false on failure
-*
-* Description:  Sets a block of palette registers by calling the VBE 2.0
-*               BIOS. This function will fail on VBE 1.2 implementations.
-*
-****************************************************************************/
-{
-    RMREGS  regs;
-
-    regs.x.ax = 0x4F09;
-    regs.h.bl = waitVRT ? 0x80 : 0x00;
-    regs.x.cx = num;
-    regs.x.dx = start;
-    VBE_callESDI(&regs, pal, sizeof(VBE_palette) * num);
-    return regs.x.ax == VBE_SUCCESS;
-}
-
-void * VBEAPI VBE_getBankedPointer(VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function:     VBE_getBankedPointer
-* Parameters:   modeInfo    - Mode info block for video mode
-* Returns:      Selector to the linear framebuffer (0 on failure)
-*
-* Description:  Returns a near pointer to the VGA framebuffer area.
-*
-****************************************************************************/
-{
-    /* We just map the pointer every time, since the pointer will always
-     * be in real mode memory, so we wont actually be mapping any real
-     * memory.
-     *
-     * NOTE: We cannot currently map a near pointer to the banked frame
-     *       buffer for Watcom Win386, so we create a 16:16 far pointer to
-     *       the video memory. All the assembler code will render to the
-     *       video memory by loading the selector rather than using a
-     *       near pointer.
-     */
-    ulong seg = (ushort)modeInfo->WinASegment;
-    if (seg != 0) {
-	if (seg == 0xA000)
-	    return (void*)PM_getA0000Pointer();
-	else
-	    return (void*)PM_mapPhysicalAddr(seg << 4,0xFFFF,true);
-	}
-    return NULL;
-}
-
-#ifndef REALMODE
-
-void * VBEAPI VBE_getLinearPointer(VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function:     VBE_getLinearPointer
-* Parameters:   modeInfo    - Mode info block for video mode
-* Returns:      Selector to the linear framebuffer (0 on failure)
-*
-* Description:  Returns a near pointer to the linear framebuffer for the video
-*               mode.
-*
-****************************************************************************/
-{
-    static ulong physPtr[MAX_LIN_PTRS] = {0};
-    static void *linPtr[MAX_LIN_PTRS] = {0};
-    static int numPtrs = 0;
-    int i;
-
-    /* Search for an already mapped pointer */
-    for (i = 0; i < numPtrs; i++) {
-	if (physPtr[i] == modeInfo->PhysBasePtr)
-	    return linPtr[i];
-	}
-    if (numPtrs < MAX_LIN_PTRS) {
-	physPtr[numPtrs] = modeInfo->PhysBasePtr;
-	linPtr[numPtrs] = PM_mapPhysicalAddr(modeInfo->PhysBasePtr,(state->VBEMemory * 1024L)-1,true);
-	return linPtr[numPtrs++];
-	}
-    return NULL;
-}
-
-static void InitPMCode(void)
-/****************************************************************************
-*
-* Function:     InitPMCode  - 32 bit protected mode version
-*
-* Description:  Finds the address of and relocates the protected mode
-*               code block from the VBE 2.0 into a local memory block. The
-*               memory block is allocated with malloc() and must be freed
-*               with VBE_freePMCode() after graphics processing is complete.
-*
-*               Note that this buffer _must_ be recopied after each mode set,
-*               as the routines will change depending on the underlying
-*               video mode.
-*
-****************************************************************************/
-{
-    RMREGS      regs;
-    RMSREGS     sregs;
-    uchar       *code;
-    int         pmLen;
-
-    if (!state->pmInfo && state->VBEVersion >= 0x200) {
-	regs.x.ax = 0x4F0A;
-	regs.x.bx = 0;
-	PM_int86x(0x10,&regs,&regs,&sregs);
-	if (regs.x.ax != VBE_SUCCESS)
-	    return;
-	if (VBE_shared)
-	    state->pmInfo = PM_mallocShared(regs.x.cx);
-	else
-	    state->pmInfo = PM_malloc(regs.x.cx);
-	if (state->pmInfo == NULL)
-	    return;
-	state->pmInfo32 = state->pmInfo;
-	pmLen = regs.x.cx;
-
-	/* Relocate the block into our local data segment */
-	code = PM_mapRealPointer(sregs.es,regs.x.di);
-	memcpy(state->pmInfo,code,pmLen);
-
-	/* Now do a sanity check on the information we recieve to ensure
-	 * that is is correct. Some BIOS return totally bogus information
-	 * in here (Matrox is one)! Under DOS this works OK, but under OS/2
-	 * we are screwed.
-	 */
-	if (state->pmInfo->setWindow >= pmLen ||
-	    state->pmInfo->setDisplayStart >= pmLen ||
-	    state->pmInfo->setPalette >= pmLen ||
-	    state->pmInfo->IOPrivInfo >= pmLen) {
-	    if (VBE_shared)
-		PM_freeShared(state->pmInfo);
-	    else
-		PM_free(state->pmInfo);
-	    state->pmInfo32 = state->pmInfo = NULL;
-	    return;
-	    }
-
-	/* Read the IO priveledge info and determine if we need to
-	 * pass a selector to MMIO registers to the bank switch code.
-	 * Since we no longer support selector allocation, we no longer
-	 * support this mechanism so we disable the protected mode
-	 * interface in this case.
-	 */
-	if (state->pmInfo->IOPrivInfo && !state->MMIOSel) {
-	    ushort *p = (ushort*)((uchar*)state->pmInfo + state->pmInfo->IOPrivInfo);
-	    while (*p != 0xFFFF)
-		p++;
-	    p++;
-	    if (*p != 0xFFFF)
-		VBE_freePMCode();
-	    }
-	}
-}
-
-void * VBEAPI VBE_getSetBank(void)
-/****************************************************************************
-*
-* Function:     VBE_getSetBank
-* Returns:      Pointer to the 32 VBE 2.0 bit bank switching routine.
-*
-****************************************************************************/
-{
-    if (state->VBEVersion >= 0x200) {
-	InitPMCode();
-	if (state->pmInfo)
-	    return (uchar*)state->pmInfo + state->pmInfo->setWindow;
-	}
-    return NULL;
-}
-
-void * VBEAPI VBE_getSetDisplayStart(void)
-/****************************************************************************
-*
-* Function:     VBE_getSetDisplayStart
-* Returns:      Pointer to the 32 VBE 2.0 bit CRT start address routine.
-*
-****************************************************************************/
-{
-    if (state->VBEVersion >= 0x200) {
-	InitPMCode();
-	if (state->pmInfo)
-	    return (uchar*)state->pmInfo + state->pmInfo->setDisplayStart;
-	}
-    return NULL;
-}
-
-void * VBEAPI VBE_getSetPalette(void)
-/****************************************************************************
-*
-* Function:     VBE_getSetPalette
-* Returns:      Pointer to the 32 VBE 2.0 bit palette programming routine.
-*
-****************************************************************************/
-{
-    if (state->VBEVersion >= 0x200) {
-	InitPMCode();
-	if (state->pmInfo)
-	    return (uchar*)state->pmInfo + state->pmInfo->setPalette;
-	}
-    return NULL;
-}
-
-void VBEAPI VBE_freePMCode(void)
-/****************************************************************************
-*
-* Function:     VBE_freePMCode
-*
-* Description:  This routine frees the protected mode code blocks that
-*               we copied from the VBE 2.0 interface. This routine must
-*               be after you have finished graphics processing to free up
-*               the memory occupied by the routines. This is necessary
-*               because the PM info memory block must be re-copied after
-*               every video mode set from the VBE 2.0 implementation.
-*
-****************************************************************************/
-{
-    if (state->pmInfo) {
-	if (VBE_shared)
-	    PM_freeShared(state->pmInfo);
-	else
-	    PM_free(state->pmInfo);
-	state->pmInfo = NULL;
-	state->pmInfo32 = NULL;
-	}
-}
-
-void VBEAPI VBE_sharePMCode(void)
-/****************************************************************************
-*
-* Function:     VBE_sharePMCode
-*
-* Description:  Enables internal sharing of the PM code buffer for OS/2.
-*
-****************************************************************************/
-{
-    VBE_shared = true;
-}
-
-/* Set of code stubs used to build the final bank switch code */
-
-#define VBE20_adjustOffset  7
-
-static uchar VBE20A_bankFunc32_Start[] = {
-    0x53,0x51,                  /*  push    ebx,ecx     */
-    0x8B,0xD0,                  /*  mov     edx,eax     */
-    0x33,0xDB,                  /*  xor     ebx,ebx     */
-    0xB1,0x00,                  /*  mov     cl,0        */
-    0xD2,0xE2,                  /*  shl     dl,cl       */
-    };
-
-static uchar VBE20_bankFunc32_End[] = {
-    0x59,0x5B,                  /*  pop     ecx,ebx     */
-    };
-
-static uchar bankFunc32[100];
-
-#define copy(p,b,a) memcpy(b,a,sizeof(a)); (p) = (b) + sizeof(a)
-
-ibool VBEAPI VBE_getBankFunc32(int *codeLen,void **bankFunc,int dualBanks,
-    int bankAdjust)
-/****************************************************************************
-*
-* Function:     VBE_getBankFunc32
-* Parameters:   codeLen     - Place to store length of code
-*               bankFunc    - Place to store pointer to bank switch code
-*               dualBanks   - True if dual banks are in effect
-*               bankAdjust  - Bank shift adjustment factor
-* Returns:      True on success, false if not compatible.
-*
-* Description:  Creates a local 32 bit bank switch function from the
-*               VBE 2.0 bank switch code that is compatible with the
-*               virtual flat framebuffer devices (does not have a return
-*               instruction at the end and takes the bank number in EAX
-*               not EDX). Note that this 32 bit code cannot include int 10h
-*               instructions, so we can only do this if we have VBE 2.0
-*               or later.
-*
-*               Note that we need to know the length of the 32 bit
-*               bank switch function, which the standard VBE 2.0 spec
-*               does not provide. In order to support this we have
-*               extended the VBE 2.0 state->pmInfo structure in UniVBE 5.2 in a
-*               way to support this, and we hope that this will become
-*               a VBE 2.0 ammendment.
-*
-*               Note also that we cannot run the linear framebuffer
-*               emulation code with bank switching routines that require
-*               a selector to the memory mapped registers passed in ES.
-*
-****************************************************************************/
-{
-    int     len;
-    uchar   *code;
-    uchar   *p;
-
-    InitPMCode();
-    if (state->VBEVersion >= 0x200 && state->pmInfo32 && !state->MMIOSel) {
-	code = (uchar*)state->pmInfo32 + state->pmInfo32->setWindow;
-	if (state->pmInfo32->extensionSig == VBE20_EXT_SIG)
-	    len = state->pmInfo32->setWindowLen-1;
-	else {
-	    /* We are running on a system without the UniVBE 5.2 extension.
-	     * We do as best we can by scanning through the code for the
-	     * ret function to determine the length. This is not foolproof,
-	     * but is the best we can do.
-	     */
-	    p = code;
-	    while (*p != 0xC3)
-		p++;
-	    len = p - code;
-	    }
-	if ((len + sizeof(VBE20A_bankFunc32_Start) + sizeof(VBE20_bankFunc32_End)) > sizeof(bankFunc32))
-	    PM_fatalError("32-bit bank switch function too long!");
-	copy(p,bankFunc32,VBE20A_bankFunc32_Start);
-	memcpy(p,code,len);
-	p += len;
-	copy(p,p,VBE20_bankFunc32_End);
-	*codeLen = p - bankFunc32;
-	bankFunc32[VBE20_adjustOffset] = (uchar)bankAdjust;
-	*bankFunc = bankFunc32;
-	return true;
-	}
-    return false;
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c
deleted file mode 100644
index cb3afe20c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  Module to implement OS specific services to measure the
-*               CPU frequency.
-*
-****************************************************************************/
-
-#include <OS.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
-    thread_id thid = find_thread(NULL);
-    thread_info tinfo;
-    get_thread_info(thid, &tinfo);
-    set_thread_priority(thid, B_REAL_TIME_PRIORITY);
-    return tinfo.priority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
-    int priority)
-{
-    thread_id thid = find_thread(NULL);
-    set_thread_priority(thid, priority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    /* TODO: Return the frequency of the counter in here. You should try to */
-    /*       normalise this value to be around 100,000 ticks per second. */
-    freq->low = 1000000;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-
-TODO: Implement this to read the counter. It should be done as a macro
-      for accuracy.
-****************************************************************************/
-#define GetCounter(t) { *((bigtime_t*) t) = system_time(); }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/event.c b/board/MAI/bios_emulator/scitech/src/pm/beos/event.c
deleted file mode 100644
index 93c6c0a8fc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/event.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  BeOS
-*
-* Description:  BeOS implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-static int          rangeX,rangeY;      /* Range of mouse coordinates   */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    /* TODO: Implement this for your OS! */
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    /* TODO: The purpose of this function is to read all keyboard and mouse */
-    /*       events from the OS specific event queue, translate them and post */
-    /*       them into the SciTech event queue. */
-    /* */
-    /* NOTE: There are a couple of important things that this function must */
-    /*       take care of: */
-    /* */
-    /*  1. Support for KEYDOWN, KEYREPEAT and KEYUP is required. */
-    /* */
-    /*  2. Support for reading hardware scan code as well as ASCII */
-    /*     translated values is required. Games use the scan codes rather */
-    /*     than ASCII values. Scan codes go into the high order byte of the */
-    /*     keyboard message field. */
-    /* */
-    /*  3. Support for at least reading mouse motion data (mickeys) from the */
-    /*     mouse is required. Using the mickey values, we can then translate */
-    /*     to mouse cursor coordinates scaled to the range of the current */
-    /*     graphics display mode. Mouse values are scaled based on the */
-    /*     global 'rangeX' and 'rangeY'. */
-    /* */
-    /*  4. Support for a timestamp for the events is required, which is */
-    /*     defined as the number of milliseconds since some event (usually */
-    /*     system startup). This is the timestamp when the event occurred */
-    /*     (ie: at interrupt time) not when it was stuff into the SciTech */
-    /*     event queue. */
-    /* */
-    /*  5. Support for mouse double click events. If the OS has a native */
-    /*     mechanism to determine this, it should be used. Otherwise the */
-    /*     time stamp information will be used by the generic event code */
-    /*     to generate double click events. */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    /* Initialise the event queue */
-    _mouseMove = mouseMove;
-    initEventQueue();
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* TODO: Do any OS specific initialisation here */
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-    /* TODO: Do any OS specific cleanup in here */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h
deleted file mode 100644
index 043d73ecd1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  BeOS
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-/* This is where you include OS specific headers for the event handling */
-/* library. */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c b/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c
deleted file mode 100644
index 2dcb1b81fb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  BeOS
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* TODO: Include any BeOS specific headers here! */
-
-/*--------------------------- Global variables ----------------------------*/
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void PMAPI PM_init(void)
-{
-    /* TODO: Do any initialisation in here. This includes getting IOPL */
-    /*       access for the process calling PM_init. This will get called */
-    /*       more than once. */
-
-    /* TODO: If you support the supplied MTRR register stuff (you need to */
-    /*       be at ring 0 for this!), you should initialise it in here. */
-
-/* MTRR_init(); */
-}
-
-long PMAPI PM_getOSType(void)
-{ return _OS_BEOS; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '/') {
-	s[pos] = '/';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    /* TODO: If you are running in a GUI environment without a console, */
-    /*       this needs to be changed to bring up a fatal error message */
-    /*       box and terminate the program. */
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    fprintf(stderr,"%s\n", msg);
-    exit(1);
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
-    /* No BIOS access for the BeOS */
-    return NULL;
-}
-
-int PMAPI PM_kbhit(void)
-{
-    /* TODO: This function checks if a key is available to be read. This */
-    /*       should be implemented, but is mostly used by the test programs */
-    /*       these days. */
-    return true;
-}
-
-int PMAPI PM_getch(void)
-{
-    /* TODO: This returns the ASCII code of the key pressed. This */
-    /*       should be implemented, but is mostly used by the test programs */
-    /*       these days. */
-    return 0xD;
-}
-
-int PMAPI PM_openConsole(void)
-{
-    /* TODO: Opens up a fullscreen console for graphics output. If your */
-    /*       console does not have graphics/text modes, this can be left */
-    /*       empty. The main purpose of this is to disable console switching */
-    /*       when in graphics modes if you can switch away from fullscreen */
-    /*       consoles (if you want to allow switching, this can be done */
-    /*       elsewhere with a full save/restore state of the graphics mode). */
-    return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* TODO: Returns the size of the console state buffer used to save the */
-    /*       state of the console before going into graphics mode. This is */
-    /*       used to restore the console back to normal when we are done. */
-    return 1;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
-    /* TODO: Saves the state of the console into the state buffer. This is */
-    /*       used to restore the console back to normal when we are done. */
-    /*       We will always restore 80x25 text mode after being in graphics */
-    /*       mode, so if restoring text mode is all you need to do this can */
-    /*       be left empty. */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,int console_id)
-{
-    /* TODO: Restore the state of the console from the state buffer. This is */
-    /*       used to restore the console back to normal when we are done. */
-    /*       We will always restore 80x25 text mode after being in graphics */
-    /*       mode, so if restoring text mode is all you need to do this can */
-    /*       be left empty. */
-}
-
-void PMAPI PM_closeConsole(int console_id)
-{
-    /* TODO: Close the console when we are done, going back to text mode. */
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
-    /* TODO: Set the OS console cursor location to the new value. This is */
-    /*       generally used for new OS ports (used mostly for DOS). */
-}
-
-void PM_setOSScreenWidth(int width,int height)
-{
-    /* TODO: Set the OS console screen width. This is generally unused for */
-    /*       new OS ports. */
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
-    /* TODO: Install a real time clock interrupt handler. Normally this */
-    /*       will not be supported from most OS'es in user land, so an */
-    /*       alternative mechanism is needed to enable software stereo. */
-    /*       Hence leave this unimplemented unless you have a high priority */
-    /*       mechanism to call the 32-bit callback when the real time clock */
-    /*       interrupt fires. */
-    return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
-    /* TODO: Set the real time clock interrupt frequency. Used for stereo */
-    /*       LC shutter glasses when doing software stereo. Usually sets */
-    /*       the frequency to around 2048 Hz. */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* TODO: Restores the real time clock handler. */
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    char *env = getenv("NUCLEUS_PATH");
-    return env ? env : "/usr/lib/nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
-    /* TODO: Return a unique ID for the machine. If a unique ID is not */
-    /*       available, return the machine name. */
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
-    /* TODO: Return the network machine name for the machine. */
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    /* No BIOS access on the BeOS */
-    return NULL;
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    static void *bankPtr;
-    if (!bankPtr)
-	bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-    return bankPtr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    /* TODO: This function maps a physical memory address to a linear */
-    /*       address in the address space of the calling process. */
-
-    /* NOTE: This function *must* be able to handle any phsyical base */
-    /*       address, and hence you will have to handle rounding of */
-    /*       the physical base address to a page boundary (ie: 4Kb on */
-    /*       x86 CPU's) to be able to properly map in the memory */
-    /*       region. */
-
-    /* NOTE: If possible the isCached bit should be used to ensure that */
-    /*       the PCD (Page Cache Disable) and PWT (Page Write Through) */
-    /*       bits are set to disable caching for a memory mapping used */
-    /*       for MMIO register access. We also disable caching using */
-    /*       the MTRR registers for Pentium Pro and later chipsets so if */
-    /*       MTRR support is enabled for your OS then you can safely ignore */
-    /*       the isCached flag and always enable caching in the page */
-    /*       tables. */
-    return NULL;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    /* TODO: This function will free a physical memory mapping previously */
-    /*       allocated with PM_mapPhysicalAddr() if at all possible. If */
-    /*       you can't free physical memory mappings, simply do nothing. */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
-    /* TODO: This is used to allocate memory that is shared between process */
-    /*       that all access the common Nucleus drivers via a common display */
-    /*       driver DLL. If your OS does not support shared memory (or if */
-    /*       the display driver does not need to allocate shared memory */
-    /*       for each process address space), this should just call PM_malloc. */
-    return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
-    /* TODO: Free the shared memory block. This will be called in the context */
-    /*       of the original calling process that allocated the shared */
-    /*       memory with PM_mallocShared. Simply call free if you do not */
-    /*       need this. */
-    PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
-    /* TODO: This function is used to map a physical memory mapping */
-    /*       previously allocated with PM_mapPhysicalAddr into the */
-    /*       address space of the calling process. If the memory mapping */
-    /*       allocated by PM_mapPhysicalAddr is global to all processes, */
-    /*       simply return the pointer. */
-    return base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    /* No BIOS access on the BeOS */
-    return NULL;
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    /* No BIOS access on the BeOS */
-    return NULL;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    /* No BIOS access on the BeOS */
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    /* No BIOS access on the BeOS */
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    /* No BIOS access on the BeOS */
-    return 0;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    /* No BIOS access on the BeOS */
-    return 0;
-}
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
-    RMSREGS *sregs)
-{
-    /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    /* TODO: Report the amount of available memory, both the amount of */
-    /*       physical memory left and the amount of virtual memory left. */
-    /*       If the OS does not provide these services, report 0's. */
-    *physical = *total = 0;
-}
-
-void * PMAPI PM_allocLockedMem(uint size,ulong *physAddr,ibool contiguous,ibool below16Meg)
-{
-    /* TODO: Allocate a block of locked, physical memory of the specified */
-    /*       size. This is used for bus master operations. If this is not */
-    /*       supported by the OS, return NULL and bus mastering will not */
-    /*       be used. */
-    return NULL;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
-    /* TODO: Free a memory block allocated with PM_allocLockedMem. */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
-    /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
-    /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
-    /* No BIOS access on the BeOS */
-}
-
-ibool PMAPI PM_enableWriteCombine(ulong base,ulong length,uint type)
-{
-    /* TODO: This function should enable Pentium Pro and Pentium II MTRR */
-    /*       write combining for the passed in physical memory base address */
-    /*       and length. Normally this is done via calls to an OS specific */
-    /*       device driver as this can only be done at ring 0. */
-    /* */
-    /* NOTE: This is a *very* important function to implement! If you do */
-    /*       not implement, graphics performance on the latest Intel chips */
-    /*       will be severly impaired. For sample code that can be used */
-    /*       directly in a ring 0 device driver, see the MSDOS implementation */
-    /*       which includes assembler code to do this directly (if the */
-    /*       program is running at ring 0). */
-    return false;
-}
-
-ibool PMAPI PM_doBIOSPOST(ushort axVal,ulong BIOSPhysAddr,void *mappedBIOS)
-{
-    /* TODO: This function is used to run the BIOS POST code on a secondary */
-    /*       controller to initialise it for use. This is not necessary */
-    /*       for multi-controller operation, but it will make it a lot */
-    /*       more convenicent for end users (otherwise they have to boot */
-    /*       the system once with the secondary controller as primary, and */
-    /*       then boot with both controllers installed). */
-    /* */
-    /*       Even if you don't support full BIOS access, it would be */
-    /*       adviseable to be able to POST the secondary controllers in the */
-    /*       system using this function as a minimum requirement. Some */
-    /*       graphics hardware has registers that contain values that only */
-    /*       the BIOS knows about, which makes bring up a card from cold */
-    /*       reset difficult if the BIOS has not POST'ed it. */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-ulong PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    ulong handle,
-    PM_findData *findData)
-{
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    ulong handle)
-{
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    if (drive == 3)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    (void)drive;
-    getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    /* TODO: Set the file attributes for a file */
-    (void)filename;
-    (void)attrib;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c
deleted file mode 100644
index a528b73177..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void _ZTimerInit(void)
-{
-    /* TODO: Do any specific internal initialisation in here */
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void _LZTimerOn(
-    LZTimerObject *tm)
-{
-    /* TODO: Start the Zen Timer counting. This should be a macro if */
-    /*       possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong _LZTimerLap(
-    LZTimerObject *tm)
-{
-    /* TODO: Compute the lap time between the current time and when the */
-    /*       timer was started. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void _LZTimerOff(
-    LZTimerObject *tm)
-{
-    /* TODO: Stop the timer counting. Should be a macro if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong _LZTimerCount(
-    LZTimerObject *tm)
-{
-    /* TODO: Compute the elapsed time and return it. Always microseconds. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong _ULZReadTime(void)
-{
-    /* TODO: Read the long period timer from the OS. The resolution of this */
-    /*       timer should be around 1/20 of a second for timing long */
-    /*       periods if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong _ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c b/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c
deleted file mode 100644
index 9aa871423e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Keyboard translation code pages for US English keyboards.
-*
-****************************************************************************/
-
-#include "event.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* This table is used for all normal key translations, and is the fallback
- * table if the key is not found in any of the other translation tables.
- * If the code is not found in this table, the ASCII code is set to 0 to
- * indicate that there is no ASCII code equivalent for this key.
- */
-static codepage_entry_t US_normal[] = {
-    {0x01,  0x1B},
-    {0x02,  '1'},
-    {0x03,  '2'},
-    {0x04,  '3'},
-    {0x05,  '4'},
-    {0x06,  '5'},
-    {0x07,  '6'},
-    {0x08,  '7'},
-    {0x09,  '8'},
-    {0x0A,  '9'},
-    {0x0B,  '0'},
-    {0x0C,  '-'},
-    {0x0D,  '='},
-    {0x0E,  0x08},
-    {0x0F,  0x09},
-    {0x10,  'q'},
-    {0x11,  'w'},
-    {0x12,  'e'},
-    {0x13,  'r'},
-    {0x14,  't'},
-    {0x15,  'y'},
-    {0x16,  'u'},
-    {0x17,  'i'},
-    {0x18,  'o'},
-    {0x19,  'p'},
-    {0x1A,  '['},
-    {0x1B,  ']'},
-    {0x1C,  0x0D},
-    {0x1E,  'a'},
-    {0x1F,  's'},
-    {0x20,  'd'},
-    {0x21,  'f'},
-    {0x22,  'g'},
-    {0x23,  'h'},
-    {0x24,  'j'},
-    {0x25,  'k'},
-    {0x26,  'l'},
-    {0x27,  ';'},
-    {0x28,  '\''},
-    {0x29,  '`'},
-    {0x2B,  '\\'},
-    {0x2C,  'z'},
-    {0x2D,  'x'},
-    {0x2E,  'c'},
-    {0x2F,  'v'},
-    {0x30,  'b'},
-    {0x31,  'n'},
-    {0x32,  'm'},
-    {0x33,  ','},
-    {0x34,  '.'},
-    {0x35,  '/'},
-    {0x37,  '*'},           /* Keypad */
-    {0x39,  ' '},
-    {0x4A,  '-'},           /* Keypad */
-    {0x4E,  '+'},           /* Keypad */
-    {0x60,  0x0D},          /* Keypad */
-    {0x61,  '/'},           /* Keypad */
-    };
-
-/* This table is used for when CAPSLOCK is active and the shift or ctrl
- * keys are not down. If the code is not found in this table, the normal
- * table above is then searched.
- */
-static codepage_entry_t US_caps[] = {
-    {0x10,  'Q'},
-    {0x11,  'W'},
-    {0x12,  'E'},
-    {0x13,  'R'},
-    {0x14,  'T'},
-    {0x15,  'Y'},
-    {0x16,  'U'},
-    {0x17,  'I'},
-    {0x18,  'O'},
-    {0x19,  'P'},
-    {0x1E,  'A'},
-    {0x1F,  'S'},
-    {0x20,  'D'},
-    {0x21,  'F'},
-    {0x22,  'G'},
-    {0x23,  'H'},
-    {0x24,  'J'},
-    {0x25,  'K'},
-    {0x26,  'L'},
-    {0x2C,  'Z'},
-    {0x2D,  'X'},
-    {0x2E,  'C'},
-    {0x2F,  'V'},
-    {0x30,  'B'},
-    {0x31,  'N'},
-    {0x32,  'M'},
-    };
-
-/* This table is used for when shift key is down, but the ctrl key is not
- * down and CAPSLOCK is not active. If the code is not found in this table,
- * the normal table above is then searched.
- */
-static codepage_entry_t US_shift[] = {
-    {0x02,  '!'},
-    {0x03,  '@'},
-    {0x04,  '#'},
-    {0x05,  '$'},
-    {0x06,  '%'},
-    {0x07,  '^'},
-    {0x08,  '&'},
-    {0x09,  '*'},
-    {0x0A,  '('},
-    {0x0B,  ')'},
-    {0x0C,  '_'},
-    {0x0D,  '+'},
-    {0x10,  'Q'},
-    {0x11,  'W'},
-    {0x12,  'E'},
-    {0x13,  'R'},
-    {0x14,  'T'},
-    {0x15,  'Y'},
-    {0x16,  'U'},
-    {0x17,  'I'},
-    {0x18,  'O'},
-    {0x19,  'P'},
-    {0x1A,  '{'},
-    {0x1B,  '}'},
-    {0x1E,  'A'},
-    {0x1F,  'S'},
-    {0x20,  'D'},
-    {0x21,  'F'},
-    {0x22,  'G'},
-    {0x23,  'H'},
-    {0x24,  'J'},
-    {0x25,  'K'},
-    {0x26,  'L'},
-    {0x27,  ':'},
-    {0x28,  '"'},
-    {0x29,  '~'},
-    {0x2B,  '|'},
-    {0x2C,  'Z'},
-    {0x2D,  'X'},
-    {0x2E,  'C'},
-    {0x2F,  'V'},
-    {0x30,  'B'},
-    {0x31,  'N'},
-    {0x32,  'M'},
-    {0x33,  '<'},
-    {0x34,  '>'},
-    {0x35,  '?'},
-    };
-
-/* This table is used for when CAPSLOCK is active and the shift key is
- * down, but the ctrl key is not. If the code is not found in this table,
- * the shift table above is then searched.
- */
-static codepage_entry_t US_shiftCaps[] = {
-    {0x10,  'q'},
-    {0x11,  'w'},
-    {0x12,  'e'},
-    {0x13,  'r'},
-    {0x14,  't'},
-    {0x15,  'y'},
-    {0x16,  'u'},
-    {0x17,  'i'},
-    {0x18,  'o'},
-    {0x19,  'p'},
-    {0x1E,  'a'},
-    {0x1F,  's'},
-    {0x20,  'd'},
-    {0x21,  'f'},
-    {0x22,  'g'},
-    {0x23,  'h'},
-    {0x24,  'j'},
-    {0x25,  'k'},
-    {0x26,  'l'},
-    {0x2C,  'z'},
-    {0x2D,  'x'},
-    {0x2E,  'c'},
-    {0x2F,  'v'},
-    {0x30,  'b'},
-    {0x31,  'n'},
-    {0x32,  'm'},
-    };
-
-/* This table is used for all key translations when the ctrl key is down,
- * regardless of the state of the shift key and CAPSLOCK. If the code is
- * not found in this table, the ASCII code is set to 0 to indicate that
- * there is no ASCII code equivalent for this key.
- */
-static codepage_entry_t US_ctrl[] = {
-    {0x01,  0x1B},
-    {0x06,  0x1E},
-    {0x0C,  0x1F},
-    {0x0E,  0x7F},
-    {0x10,  0x11},
-    {0x11,  0x17},
-    {0x12,  0x05},
-    {0x13,  0x12},
-    {0x14,  0x14},
-    {0x15,  0x19},
-    {0x16,  0x16},
-    {0x17,  0x09},
-    {0x18,  0x0F},
-    {0x19,  0x10},
-    {0x1A,  0x1B},
-    {0x1B,  0x1D},
-    {0x1C,  0x0A},
-    {0x1E,  0x01},
-    {0x1F,  0x13},
-    {0x20,  0x04},
-    {0x21,  0x06},
-    {0x22,  0x07},
-    {0x23,  0x08},
-    {0x24,  0x0A},
-    {0x25,  0x0B},
-    {0x26,  0x0C},
-    {0x2B,  0x1C},
-    {0x2C,  0x1A},
-    {0x2D,  0x18},
-    {0x2E,  0x03},
-    {0x2F,  0x16},
-    {0x30,  0x02},
-    {0x31,  0x0E},
-    {0x32,  0x0D},
-    {0x39,  ' '},
-    };
-
-static codepage_entry_t US_numPad[] = {
-    {0x4C,  '5'},
-    {0x62,  '4'},
-    {0x63,  '6'},
-    {0x64,  '8'},
-    {0x65,  '2'},
-    {0x66,  '0'},
-    {0x67,  '.'},
-    {0x68,  '7'},
-    {0x69,  '1'},
-    {0x6A,  '9'},
-    {0x6B,  '3'},
-    };
-
-codepage_t _CP_US_English = {
-    "US English",
-    US_normal,      EVT_ARR_SIZE(US_normal),
-    US_caps,        EVT_ARR_SIZE(US_caps),
-    US_shift,       EVT_ARR_SIZE(US_shift),
-    US_shiftCaps,   EVT_ARR_SIZE(US_shiftCaps),
-    US_ctrl,        EVT_ARR_SIZE(US_ctrl),
-    US_numPad,      EVT_ARR_SIZE(US_numPad),
-    };
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common.c b/board/MAI/bios_emulator/scitech/src/pm/common.c
deleted file mode 100644
index d5a8e8f1c7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module containing code common to all platforms.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#if defined(__WIN32_VXD__) || defined(__OS2_VDD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#endif
-
-/*---------------------------- Global variables ---------------------------*/
-
-/* {secret} */
-long _VARAPI    ___drv_os_type = _OS_UNSUPPORTED;
-static char     localBPDPath[PM_MAX_PATH] = "";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path    - Local path to the Nucleus BPD driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable. By default the local BPD path is
-always set to the current directory if not initialised.
-****************************************************************************/
-void PMAPI PM_setLocalBPDPath(
-    const char *path)
-{
-    PM_init();
-    strncpy(localBPDPath,path,sizeof(localBPDPath));
-    localBPDPath[sizeof(localBPDPath)-1] = 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-bpdpath     - Place to store the actual path to the file
-cachedpath  - Place to store the cached BPD driver path
-trypath     - Path to try to find the BPD file in
-subpath     - Optional sub path to append to trypath
-dllname     - Name of the Binary Portable DLL to load
-
-RETURNS:
-True if found, false if not.
-
-REMARKS:
-Trys the specified path to see if the BPD file can be found or not. If so,
-the path used is returned in bpdpath and cachedpath.
-****************************************************************************/
-static ibool TryPath(
-    char *bpdpath,
-    char *cachedpath,
-    const char *trypath,
-    const char *subpath,
-    const char *dllname)
-{
-    char    filename[256];
-    FILE    *f;
-
-    strcpy(bpdpath, trypath);
-    PM_backslash(bpdpath);
-    strcat(bpdpath,subpath);
-    PM_backslash(bpdpath);
-    strcpy(filename,bpdpath);
-    strcat(filename,dllname);
-    if ((f = fopen(filename,"rb")) == NULL)
-	return false;
-    if (cachedpath)
-	strcpy(cachedpath,bpdpath);
-    fclose(f);
-    return true;
-}
-
-/****************************************************************************
-RETURNS:
-True if local override enabled, false if not.
-
-REMARKS:
-Tests to see if the local override option is enabled, and if so it will
-look for the Nucleus drivers in the local application directories in
-preference to the Nucleus system directories.
-****************************************************************************/
-static ibool GetLocalOverride(void)
-{
-    char            filename[256];
-    FILE            *f;
-    static ibool    local_override = -1;
-
-    if (local_override == -1) {
-	local_override = false;
-	strcpy(filename,PM_getNucleusPath());
-	PM_backslash(filename);
-	strcat(filename,"graphics.ini");
-	if ((f = fopen(filename,"r")) != NULL) {
-	    while (!feof(f) && fgets(filename,sizeof(filename),f)) {
-		if (strnicmp(filename,"uselocal",8) == 0) {
-		    local_override = ((*(filename+9) - '0') == 1);
-		    break;
-		    }
-		}
-	    fclose(f);
-	    }
-	}
-    return local_override;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Sets the location of the debug log file.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-dllname - Name of the Binary Portable DLL to load
-bpdpath - Place to store the actual path to the file
-
-RETURNS:
-True if found, false if not.
-
-REMARKS:
-Finds the location of a specific Binary Portable DLL, by searching all
-the standard SciTech Nucleus driver locations.
-****************************************************************************/
-ibool PMAPI PM_findBPD(
-    const char *dllname,
-    char *bpdpath)
-{
-    static char cachedpath[PM_MAX_PATH] = "";
-
-    /* On the first call determine the path to the Nucleus drivers */
-    if (cachedpath[0] == 0) {
-	/* First try in the global system Nucleus driver path if
-	 * the local override setting is not enabled.
-	 */
-	PM_init();
-	if (!GetLocalOverride()) {
-	    if (TryPath(bpdpath,cachedpath,PM_getNucleusPath(),"",dllname))
-		return true;
-	    }
-
-	/* Next try in the local application directory if available */
-	if (localBPDPath[0] != 0) {
-	    if (TryPath(bpdpath,cachedpath,localBPDPath,"",dllname))
-		return true;
-	    }
-	else {
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
-	    char    *mgl_root;
-	    if ((mgl_root = getenv("MGL_ROOT")) != NULL) {
-		if (TryPath(bpdpath,cachedpath,mgl_root,"drivers",dllname))
-		    return true;
-		}
-#endif
-	    PM_getCurrentPath(bpdpath,PM_MAX_PATH);
-	    if (TryPath(bpdpath,cachedpath,bpdpath,"drivers",dllname))
-		return true;
-	    }
-
-	/* Finally try in the global system path again so that we
-	 * will still find the drivers in the global system path if
-	 * the local override option is on, but the application does
-	 * not have any local override drivers.
-	 */
-	if (TryPath(bpdpath,cachedpath,PM_getNucleusPath(),"",dllname))
-	    return true;
-
-	/* Whoops, we can't find the BPD file! */
-	return false;
-	}
-
-    /* Always try in the previously discovered path */
-    return TryPath(bpdpath,NULL,cachedpath,"",dllname);
-}
-
-/****************************************************************************
-REMARKS:
-Copies a string into another, and returns dest + strlen(src).
-****************************************************************************/
-static char *_stpcpy(
-    char *_dest,
-    const char *_src)
-{
-    if (!_dest || !_src)
-	return 0;
-    while ((*_dest++ = *_src++) != 0)
-	;
-    return --_dest;
-}
-
-/****************************************************************************
-REMARKS:
-Copies a string into another, stopping at the maximum length. The string
-is properly terminated (unlike strncpy).
-****************************************************************************/
-static void safe_strncpy(
-    char *dst,
-    const char *src,
-    unsigned maxlen)
-{
-    if (dst) {
-	if(strlen(src) >= maxlen) {
-	    strncpy(dst, src, maxlen);
-	    dst[maxlen] = 0;
-	    }
-	else
-	    strcpy(dst, src);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Determins if the dot separator is present in the string.
-****************************************************************************/
-static int findDot(
-    char *p)
-{
-    if (*(p-1) == '.')
-	p--;
-    switch (*--p) {
-	case ':':
-	    if (*(p-2) != '\0')
-		break;
-	case '/':
-	case '\\':
-	case '\0':
-	    return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Make a full pathname from split components.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-path    - Place to store full path
-drive   - Drive component for path
-dir     - Directory component for path
-name    - Filename component for path
-ext     - Extension component for path
-
-REMARKS:
-Function to make a full pathname from split components. Under Unix the
-drive component will usually be empty. If the drive, dir, name, or ext
-parameters are null or empty, they are not inserted in the path string.
-Otherwise, if the drive doesn't end with a colon, one is inserted in the
-path. If the dir doesn't end in a slash, one is inserted in the path.
-If the ext doesn't start with a dot, one is inserted in the path.
-
-The maximum sizes for the path string is given by the constant PM_MAX_PATH,
-which includes space for the null-terminator.
-
-SEE ALSO:
-PM_splitPath
-****************************************************************************/
-void PMAPI PM_makepath(
-    char *path,
-    const char *drive,
-    const char *dir,
-    const char *name,
-    const char *ext)
-{
-    if (drive && *drive) {
-	*path++ = *drive;
-	*path++ = ':';
-	}
-    if (dir && *dir) {
-	path = _stpcpy(path,dir);
-	if (*(path-1) != '\\' && *(path-1) != '/')
-#ifdef  __UNIX__
-	    *path++ = '/';
-#else
-	    *path++ = '\\';
-#endif
-	}
-    if (name)
-	path = _stpcpy(path,name);
-    if (ext && *ext) {
-	if (*ext != '.')
-	    *path++ = '.';
-	path = _stpcpy(path,ext);
-	}
-    *path = 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Split a full pathname into components.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-path    - Full path to split
-drive   - Drive component for path
-dir     - Directory component for path
-name    - Filename component for path
-ext     - Extension component for path
-
-RETURNS:
-Flags indicating what components were parsed.
-
-REMARKS:
-Function to split a full pathmame into separate components in the form
-
-    X:\DIR\SUBDIR\NAME.EXT
-
-and splits path into its four components. It then stores those components
-in the strings pointed to by drive, dir, name and ext. (Each component is
-required but can be a NULL, which means the corresponding component will be
-parsed but not stored).
-
-The maximum sizes for these strings are given by the constants PM_MAX_DRIVE
-and PM_MAX_PATH. PM_MAX_DRIVE is always 4, and PM_MAX_PATH is usually at
-least 256 characters. Under Unix the dir, name and ext components may be
-up to the full path in length.
-
-SEE ALSO:
-PM_makePath
-****************************************************************************/
-int PMAPI PM_splitpath(
-    const char *path,
-    char *drive,
-    char *dir,
-    char *name,
-    char *ext)
-{
-    char    *p;
-    int     temp,ret;
-    char    buf[PM_MAX_PATH+2];
-
-    /* Set all string to default value zero */
-    ret = 0;
-    if (drive)  *drive = 0;
-    if (dir)    *dir = 0;
-    if (name)   *name = 0;
-    if (ext)    *ext = 0;
-
-    /* Copy filename into template up to PM_MAX_PATH characters */
-    p = buf;
-    if ((temp = strlen(path)) > PM_MAX_PATH)
-	temp = PM_MAX_PATH;
-    *p++ = 0;
-    strncpy(p, path, temp);
-    *(p += temp) = 0;
-
-    /* Split the filename and fill corresponding nonzero pointers */
-    temp = 0;
-    for (;;) {
-	switch (*--p) {
-	    case '.':
-		if (!temp && (*(p+1) == '\0'))
-		    temp = findDot(p);
-		if ((!temp) && ((ret & PM_HAS_EXTENSION) == 0)) {
-		    ret |= PM_HAS_EXTENSION;
-		    safe_strncpy(ext, p, PM_MAX_PATH - 1);
-		    *p = 0;
-		    }
-		continue;
-	    case ':':
-		if (p != &buf[2])
-		    continue;
-	    case '\0':
-		if (temp) {
-		    if (*++p)
-			ret |= PM_HAS_DIRECTORY;
-		    safe_strncpy(dir, p, PM_MAX_PATH - 1);
-		    *p-- = 0;
-		    break;
-		    }
-	    case '/':
-	    case '\\':
-		if (!temp) {
-		    temp++;
-		    if (*++p)
-			ret |= PM_HAS_FILENAME;
-		    safe_strncpy(name, p, PM_MAX_PATH - 1);
-		    *p-- = 0;
-		    if (*p == 0 || (*p == ':' && p == &buf[2]))
-			break;
-		    }
-		continue;
-	    case '*':
-	    case '?':
-		if (!temp)
-		    ret |= PM_HAS_WILDCARDS;
-	    default:
-		continue;
-	    }
-	break;
-	}
-    if (*p == ':') {
-	if (buf[1])
-	    ret |= PM_HAS_DRIVE;
-	safe_strncpy(drive, &buf[1], PM_MAX_DRIVE - 1);
-	}
-    return ret;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Block until a specific time has elapsed since the last call
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-milliseconds    - Number of milliseconds for delay
-
-REMARKS:
-This function will block the calling thread or process until the specified
-number of milliseconds have passed since the /last/ call to this function.
-The first time this function is called, it will return immediately. On
-subsquent calls it will block until the specified time has elapsed, or it
-will return immediately if the time has already elapsed.
-
-This function is useful to provide constant time functionality in a
-program, such as a frame rate limiter for graphics applications etc.
-
-SEE ALSO:
-PM_sleep
-****************************************************************************/
-void PMAPI PM_blockUntilTimeout(
-    ulong milliseconds)
-{
-    ulong                   microseconds = milliseconds * 1000L,msDelay;
-    static LZTimerObject    tm;
-    static ibool            firstTime = true;
-
-    if (firstTime) {
-	firstTime = false;
-	LZTimerOnExt(&tm);
-	}
-    else {
-	if ((msDelay = (microseconds - LZTimerLapExt(&tm)) / 1000L) > 0)
-	    PM_sleep(msDelay);
-	while (LZTimerLapExt(&tm) < microseconds)
-	    ;
-	LZTimerOffExt(&tm);
-	LZTimerOnExt(&tm);
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm
deleted file mode 100644
index 60ebed713f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm
+++ /dev/null
@@ -1,600 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NASM or TASM Assembler
-;* Environment: Intel 32 bit Protected Mode.
-;*
-;* Description: Code to determine the Intel processor type.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"
-
-header      _cpuinfo
-
-begdataseg  _cpuinfo                ; Start of data segment
-
-cache_id    db  "01234567890123456"
-intel_id    db  "GenuineIntel"      ; Intel vendor ID
-cyrix_id    db  "CyrixInstead"      ; Cyrix vendor ID
-amd_id      db  "AuthenticAMD"      ; AMD vendor ID
-idt_id      db  "CentaurHauls"      ; IDT vendor ID
-
-CPU_IDT     EQU 01000h              ; Flag for IDT processors
-CPU_Cyrix   EQU 02000h              ; Flag for Cyrix processors
-CPU_AMD     EQU 04000h              ; Flag for AMD processors
-CPU_Intel   EQU 08000h              ; Flag for Intel processors
-
-enddataseg  _cpuinfo
-
-begcodeseg  _cpuinfo                ; Start of code segment
-
-ifdef   USE_NASM
-%macro mCPU_ID 0
-db  00Fh,0A2h
-%endmacro
-else
-MACRO   mCPU_ID
-db  00Fh,0A2h
-ENDM
-endif
-
-ifdef   USE_NASM
-%macro mRDTSC 0
-db  00Fh,031h
-%endmacro
-else
-MACRO   mRDTSC
-db  00Fh,031h
-ENDM
-endif
-
-;----------------------------------------------------------------------------
-; bool _CPU_check80386(void)
-;----------------------------------------------------------------------------
-; Determines if we have an i386 processor.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_check80386
-
-        enter_c
-
-        xor     edx,edx             ; EDX = 0, not an 80386
-        mov     bx, sp
-ifdef   USE_NASM
-        and     sp, ~3
-else
-        and     sp, not 3
-endif
-        pushfd                      ; Push original EFLAGS
-        pop     eax                 ; Get original EFLAGS
-        mov     ecx, eax            ; Save original EFLAGS
-        xor     eax, 40000h         ; Flip AC bit in EFLAGS
-        push    eax                 ; Save new EFLAGS value on
-                                    ;   stack
-        popfd                       ; Replace current EFLAGS value
-        pushfd                      ; Get new EFLAGS
-        pop     eax                 ; Store new EFLAGS in EAX
-        xor     eax, ecx            ; Can't toggle AC bit,
-                                    ;   processor=80386
-        jnz     @@Done              ; Jump if not an 80386 processor
-        inc     edx                 ; We have an 80386
-
-@@Done: push    ecx
-        popfd
-        mov     sp, bx
-        mov     eax, edx
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_check80486(void)
-;----------------------------------------------------------------------------
-; Determines if we have an i486 processor.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_check80486
-
-        enter_c
-
-; Distinguish between the i486 and Pentium by the ability to set the ID flag
-; in the EFLAGS register. If the ID flag is set, then we can use the CPUID
-; instruction to determine the final version of the chip. Otherwise we
-; simply have an 80486.
-
-; Distinguish between the i486 and Pentium by the ability to set the ID flag
-; in the EFLAGS register. If the ID flag is set, then we can use the CPUID
-; instruction to determine the final version of the chip. Otherwise we
-; simply have an 80486.
-
-        pushfd                      ; Get original EFLAGS
-        pop     eax
-        mov     ecx, eax
-        xor     eax, 200000h        ; Flip ID bit in EFLAGS
-        push    eax                 ; Save new EFLAGS value on stack
-        popfd                       ; Replace current EFLAGS value
-        pushfd                      ; Get new EFLAGS
-        pop     eax                 ; Store new EFLAGS in EAX
-        xor     eax, ecx            ; Can not toggle ID bit,
-        jnz     @@1                 ; Processor=80486
-        mov     eax,1               ; We dont have a Pentium
-        jmp     @@Done
-@@1:    mov     eax,0               ; We have Pentium or later
-@@Done: leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_checkClone(void)
-;----------------------------------------------------------------------------
-; Checks if the i386 or i486 processor is a clone or genuine Intel.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_checkClone
-
-        enter_c
-
-        mov     ax,5555h            ; Check to make sure this is a 32-bit processor
-        xor     dx,dx
-        mov     cx,2h
-        div     cx                  ; Perform Division
-        clc
-        jnz     @@NoClone
-        jmp     @@Clone
-@@NoClone:
-        stc
-@@Clone:
-        pushfd
-        pop     eax                 ; Get the flags
-        and     eax,1
-        xor     eax,1               ; EAX=0 is probably Intel, EAX=1 is a Clone
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_haveCPUID(void)
-;----------------------------------------------------------------------------
-; Determines if we have support for the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_haveCPUID
-
-        enter_c
-
-ifdef flatmodel
-        pushfd                      ; Get original EFLAGS
-        pop     eax
-        mov     ecx, eax
-        xor     eax, 200000h        ; Flip ID bit in EFLAGS
-        push    eax                 ; Save new EFLAGS value on stack
-        popfd                       ; Replace current EFLAGS value
-        pushfd                      ; Get new EFLAGS
-        pop     eax                 ; Store new EFLAGS in EAX
-        xor     eax, ecx            ; Can not toggle ID bit,
-        jnz     @@1                 ; Processor=80486
-        mov     eax,0               ; We dont have CPUID support
-        jmp     @@Done
-@@1:    mov     eax,1               ; We have CPUID support
-else
-        mov     eax,0               ; CPUID requires 32-bit pmode
-endif
-@@Done: leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_checkCPUID(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_checkCPUID
-
-        enter_c
-
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax, 1              ; Make sure 1 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        xor     eax,eax             ; Assume vendor is unknown
-
-; Check for GenuineIntel processors
-
-        LEA_L   esi,intel_id
-        cmp     [DWORD esi], ebx
-        jne     @@NotIntel
-        cmp     [DWORD esi+4], edx
-        jne     @@NotIntel
-        cmp     [DWORD esi+8], ecx
-        jne     @@NotIntel
-        mov     eax,CPU_Intel       ; Flag that we have GenuineIntel
-        jmp     @@FoundVendor
-
-; Check for CyrixInstead processors
-
-@@NotIntel:
-        LEA_L   esi,cyrix_id
-        cmp     [DWORD esi], ebx
-        jne     @@NotCyrix
-        cmp     [DWORD esi+4], edx
-        jne     @@NotCyrix
-        cmp     [DWORD esi+8], ecx
-        jne     @@NotCyrix
-        mov     eax,CPU_Cyrix       ; Flag that we have CyrixInstead
-        jmp     @@FoundVendor
-
-; Check for AuthenticAMD processors
-
-@@NotCyrix:
-        LEA_L   esi,amd_id
-        cmp     [DWORD esi], ebx
-        jne     @@NotAMD
-        cmp     [DWORD esi+4], edx
-        jne     @@NotAMD
-        cmp     [DWORD esi+8], ecx
-        jne     @@NotAMD
-        mov     eax,CPU_AMD         ; Flag that we have AuthenticAMD
-        jmp     @@FoundVendor
-
-; Check for CentaurHauls processors
-
-@@NotAMD:
-        LEA_L   esi,idt_id
-        cmp     [DWORD esi], ebx
-        jne     @@NotIDT
-        cmp     [DWORD esi+4], edx
-        jne     @@NotIDT
-        cmp     [DWORD esi+8], ecx
-        jne     @@NotIDT
-        mov     eax,CPU_IDT         ; Flag that we have AuthenticIDT
-        jmp     @@FoundVendor
-
-@@NotIDT:
-
-@@FoundVendor:
-        push    eax
-        xor     eax, eax
-        inc     eax
-        mCPU_ID                     ; Get family/model/stepping/features
-        and     eax, 0F00h
-        shr     eax, 8              ; Isolate family
-        and     eax, 0Fh
-        pop     ecx
-        or      eax,ecx             ; Combine in the clone flag
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDModel(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_getCPUIDModel
-
-        enter_c
-
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax, 1              ; Make sure 1 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        xor     eax, eax
-        inc     eax
-        mCPU_ID                     ; Get family/model/stepping/features
-        and     eax, 0F0h
-        shr     eax, 4              ; Isolate model
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDStepping(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_getCPUIDStepping
-
-        enter_c
-
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax, 1              ; Make sure 1 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        xor     eax, eax
-        inc     eax
-        mCPU_ID                     ; Get family/model/stepping/features
-        and     eax, 00Fh           ; Isolate stepping
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDFeatures(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_getCPUIDFeatures
-
-        enter_c
-
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax, 1              ; Make sure 1 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        xor     eax, eax
-        inc     eax
-        mCPU_ID                     ; Get family/model/stepping/features
-        mov     eax, edx
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCacheSize(void)
-;----------------------------------------------------------------------------
-; Determines the CPU cache size for Intel processors
-;----------------------------------------------------------------------------
-cprocstart  _CPU_getCacheSize
-
-        enter_c
-        xor     eax, eax            ; Set up for CPUID instruction
-        mCPU_ID                     ; Get and save vendor ID
-        cmp     eax,2               ; Make sure 2 is valid input for CPUID
-        jl      @@Fail              ; We dont have the CPUID instruction
-        mov     eax,2
-        mCPU_ID                     ; Get cache descriptors
-        LEA_L   esi,cache_id        ; Get address of cache ID (-fPIC aware)
-        shr     eax,8
-        mov     [esi+0],eax
-        mov     [esi+3],ebx
-        mov     [esi+7],ecx
-        mov     [esi+11],edx
-        xor     eax,eax
-        LEA_L   esi,cache_id        ; Get address of cache ID (-fPIC aware)
-        mov     edi,15
-@@ScanLoop:
-        cmp     [BYTE esi],41h
-        mov     eax,128
-        je      @@Done
-        cmp     [BYTE esi],42h
-        mov     eax,256
-        je      @@Done
-        cmp     [BYTE esi],43h
-        mov     eax,512
-        je      @@Done
-        cmp     [BYTE esi],44h
-        mov     eax,1024
-        je      @@Done
-        cmp     [BYTE esi],45h
-        mov     eax,2048
-        je      @@Done
-        inc     esi
-        dec     edi
-        jnz     @@ScanLoop
-
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_have3DNow(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_have3DNow
-
-        enter_c
-
-        mov     eax,80000000h       ; Query for extended functions
-        mCPU_ID                     ; Get extended function limit
-        cmp     eax,80000001h
-        jbe     @@Fail              ; Nope, we dont have function 800000001h
-        mov     eax,80000001h       ; Setup extended function 800000001h
-        mCPU_ID                     ; and get the information
-        test    edx,80000000h       ; Bit 31 is set if 3DNow! present
-        jz      @@Fail              ; Nope, we dont have 3DNow support
-        mov     eax,1               ; Yep, we have 3DNow! support!
-@@Done: leave_c
-        ret
-
-@@Fail: xor     eax,eax
-        jmp     @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_quickRDTSC(void)
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the low order 32-bits
-;----------------------------------------------------------------------------
-cprocstart  _CPU_quickRDTSC
-
-        mRDTSC
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _CPU_runBSFLoop(ulong interations)
-;----------------------------------------------------------------------------
-; Runs a loop of BSF instructions for the specified number of iterations
-;----------------------------------------------------------------------------
-cprocstart  _CPU_runBSFLoop
-
-        ARG     iterations:ULONG
-
-        push    _bp
-        mov     _bp,_sp
-        push    _bx
-
-        mov     edx,[iterations]
-        mov     eax,80000000h
-        mov     ebx,edx
-
-        ALIGN   4
-
-@@loop: bsf     ecx,eax
-        dec     ebx
-        jnz     @@loop
-
-        pop     _bx
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void  _CPU_readTimeStamp(CPU_largeInteger *time);
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the 64-bit result.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_readTimeStamp
-
-        mRDTSC
-        mov     ecx,[esp+4]     ; Access directly without stack frame
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_diffTime64(CPU_largeInteger *t1,CPU_largeInteger *t2,CPU_largeInteger *t)
-;----------------------------------------------------------------------------
-; Computes the difference between two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_diffTime64
-
-        ARG     t1:DPTR, t2:DPTR, t:DPTR
-
-        enter_c
-
-        mov     ecx,[t2]
-        mov     eax,[ecx]       ; EAX := t2.low
-        mov     ecx,[t1]
-        sub     eax,[ecx]
-        mov     edx,eax         ; EDX := low difference
-        mov     ecx,[t2]
-        mov     eax,[ecx+4]     ; ECX := t2.high
-        mov     ecx,[t1]
-        sbb     eax,[ecx+4]     ; EAX := high difference
-
-        mov     ebx,[t]         ; Store the result
-        mov     [ebx],edx       ; Store low part
-        mov     [ebx+4],eax     ; Store high part
-        mov     eax,edx         ; Return low part
-ifndef flatmodel
-        shld    edx,eax,16      ; Return in DX:AX
-endif
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_calcMicroSec(CPU_largeInteger *count,ulong freq);
-;----------------------------------------------------------------------------
-; Computes the value in microseconds for the elapsed time with maximum
-; precision. The formula we use is:
-;
-;   us = (((diff * 0x100000) / freq) * 1000000) / 0x100000)
-;
-; The power of two multiple before the first divide allows us to scale the
-; 64-bit difference using simple shifts, and then the divide brings the
-; final result into the range to fit into a 32-bit integer.
-;----------------------------------------------------------------------------
-cprocstart  _CPU_calcMicroSec
-
-        ARG     count:DPTR, freq:ULONG
-
-        enter_c
-
-        mov     ecx,[count]
-        mov     eax,[ecx]       ; EAX := low part
-        mov     edx,[ecx+4]     ; EDX := high part
-        shld    edx,eax,20
-        shl     eax,20          ; diff * 0x100000
-        div     [DWORD freq]    ; (diff * 0x100000) / freq
-        mov     ecx,1000000
-        xor     edx,edx
-        mul     ecx             ; ((diff * 0x100000) / freq) * 1000000)
-        shrd    eax,edx,20      ; ((diff * 0x100000) / freq) * 1000000) / 0x100000
-ifndef flatmodel
-        shld    edx,eax,16      ; Return in DX:AX
-endif
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_mulDiv(ulong a,ulong b,ulong c);
-;----------------------------------------------------------------------------
-; Computes the following with 64-bit integer precision:
-;
-;   result = (a * b) / c
-;
-;----------------------------------------------------------------------------
-cprocstart  _CPU_mulDiv
-
-        ARG     a:ULONG, b:ULONG, c:ULONG
-
-        enter_c
-        mov     eax,[a]
-        imul    [ULONG b]
-        idiv    [ULONG c]
-ifndef flatmodel
-        shld    edx,eax,16      ; Return in DX:AX
-endif
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _cpuinfo
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm
deleted file mode 100644
index 2b6e1e8b56..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm
+++ /dev/null
@@ -1,246 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 16/32 bit Ring 0 device driver
-;*
-;* Description: Assembler support routines for ISA DMA controller.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _dma                ; Set up memory model
-
-begdataseg  _dma                ; Start of data segment
-
-cpublic _PM_DMADataStart
-
-; DMA register I/O addresses for channels 0-7 (except 4)
-
-DMAC_page       db 087h,083h,081h,082h, -1,08Bh,089h,08Ah
-DMAC_addr       db 000h,002h,004h,006h, -1,0C4h,0C8h,0CCh
-DMAC_cnt        db 001h,003h,005h,007h, -1,0C6h,0CAh,0CEh
-DMAC_mask       db 00Ah,00Ah,00Ah,00Ah, -1,0D4h,0D4h,0D4h
-DMAC_mode       db 00Bh,00Bh,00Bh,00Bh, -1,0D6h,0D6h,0D6h
-DMAC_FF         db 00Ch,00Ch,00Ch,00Ch, -1,0D8h,0D8h,0D8h
-
-cpublic _PM_DMADataEnd
-
-enddataseg  _dma
-
-begcodeseg  _dma                ; Start of code segment
-
-ifdef   flatmodel
-
-cpublic _PM_DMACodeStart
-
-;----------------------------------------------------------------------------
-; void PM_DMACDisable(int channel);
-;----------------------------------------------------------------------------
-; Masks DMA channel, inhibiting DMA transfers
-;----------------------------------------------------------------------------
-cprocstart  PM_DMACDisable
-
-        ARG     channel:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     ecx,[channel]       ; ECX indexes DMAC register tables
-        mov     dh,0                ; DH = 0 for DMAC register port access
-        mov     al,cl
-        and     al,11b
-        or      al,100b             ; AL = (channel & 3) | "set mask bit"
-        mov     dl,[DMAC_mask+ecx]
-        out     dx,al
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_DMACEnable(int channel);
-;----------------------------------------------------------------------------
-; Unmasks DMA channel, enabling DMA transfers
-;----------------------------------------------------------------------------
-cprocstart  PM_DMACEnable
-
-        ARG     channel:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     ecx,[channel]       ; ECX indexes DMAC register tables
-        mov     dh,0                ; DH = 0 for DMAC register port access
-        mov     al,cl
-        and     al,11b              ; AL = (channel & 3), "set mask bit"=0
-        mov     dl,[DMAC_mask+ecx]
-        out     dx,al
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_DMACProgram(int channel,int mode,ulong bufferPhys,int count);
-;----------------------------------------------------------------------------
-; Purpose: Program DMA controller to perform transfer from first 16MB
-; based on previously selected mode and channel. DMA transfer may be enabled
-; by subsequent call to PM_DMACEnable.
-;
-; Entry:    channel - DMA channel in use (0-7)
-;           mode    - Selected DMAMODE type for transfer
-;           buffer  - 32-bit physical address of DMA buffer
-;           count   - DMA byte count (1-65536 bytes)
-;----------------------------------------------------------------------------
-cprocstart  PM_DMACProgram
-
-        ARG     channel:UINT, mode:UINT, bufferPhys:ULONG, count:UINT
-
-        enter_c
-        pushfd
-        cli                         ; Disable interrupts
-
-; Mask DMA channel to disable it
-
-        mov     ebx,[channel]       ; EBX indexes DMAC register tables
-        mov     dh,0                ; DH = 0 for DMAC register port access
-        mov     al,bl
-        and     al,11b
-        or      al,100b             ; AL = (channel & 3) | "set mask bit"
-        mov     dl,[DMAC_mask+ebx]
-        out     dx,al
-
-; Generate IOW to clear FF toggle state
-
-        mov     al,0
-        mov     dl,[DMAC_FF+ebx]
-        out     dx,al
-
-; Compute buffer address to program
-
-        mov     eax,[bufferPhys]    ; AX := DMA address offset
-        mov     ecx,eax
-        shr     ecx,16              ; CL := bufferPhys >> 16 (DMA page)
-        mov     esi,[count]         ; ESI = # of bytes to transfer
-        cmp     ebx,4               ; 16-bit channel?
-        jb      @@WriteDMAC         ; No, program DMAC
-        shr     eax,1               ; Yes, convert address and count
-        shr     esi,1               ; to 16-bit, 128K/page format
-
-; Set the DMA address word (bits 0-15)
-
-@@WriteDMAC:
-        mov     dl,[DMAC_addr+ebx]
-        out     dx,al
-        mov     al,ah
-        out     dx,al
-
-; Set DMA transfer count
-
-        mov     eax,esi
-        dec     eax                 ; ESI = # of bytes to transfer - 1
-        mov     dl,[DMAC_cnt+ebx]
-        out     dx,al
-        mov     al,ah
-        out     dx,al
-
-; Set DMA page byte (bits 16-23)
-
-        mov     al,cl
-        mov     dl,[DMAC_page+ebx]
-        out     dx,al
-
-; Set the DMA channel mode
-
-        mov     al,bl
-        and     al,11b
-        or      al,[BYTE mode]      ; EAX = (channel & 3) | mode
-        mov     dl,[DMAC_mode+ebx]
-        out     dx,al
-
-        pop     eax                 ; SMP safe interrupt state restore!
-        test    eax,200h
-        jz      @@1
-        sti
-@@1:    leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong PMAPI PM_DMACPosition(int channel);
-;----------------------------------------------------------------------------
-; Returns the current position in a dma transfer. Interrupts should be
-; disabled before calling this function.
-;----------------------------------------------------------------------------
-cprocstart  PM_DMACPosition
-
-        ARG     channel:UINT
-
-        enter_c
-        mov     ecx,[channel]       ; ECX indexes DMAC register tables
-        mov     dh,0                ; DH = 0 for DMAC register port access
-
-; Generate IOW to clear FF toggle state
-
-        mov     al,0
-        mov     dl,[DMAC_FF+ebx]
-        out     dx,al
-        xor     eax,eax
-        xor     ecx,ecx
-
-; Now read the current position for the channel
-
-@@ReadLoop:
-        mov     dl,[DMAC_cnt+ebx]
-        out     dx,al
-        in      al,dx
-        mov     cl,al
-        in      al,dx
-        mov     ch,al               ; ECX := first count read
-        in      al,dx
-        mov     ah,al
-        in      al,dx
-        xchg    al,ah               ; EAX := second count read
-        sub     ecx,eax
-        cmp     ecx,40h
-        jg      @@ReadLoop
-        cmp     ebx,4               ; 16-bit channel?
-        jb      @@Exit              ; No, we are done
-        shl     eax,1               ; Yes, adjust to byte address
-
-@@Exit: leave_c
-        ret
-
-cprocend
-
-
-cpublic _PM_DMACodeEnd
-
-endif
-
-endcodeseg  _dma
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm
deleted file mode 100644
index fdec1b58d8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm
+++ /dev/null
@@ -1,309 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NASM or TASM Assembler
-;* Environment: Intel 32 bit Protected Mode.
-;*
-;* Description: Code for 64-bit arhithmetic
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"
-
-header      _int64
-
-begcodeseg  _int64                  ; Start of code segment
-
-a_low       EQU 04h                 ; Access a_low directly on stack
-a_high      EQU 08h                 ; Access a_high directly on stack
-b_low       EQU 0Ch                 ; Access b_low directly on stack
-shift       EQU 0Ch                 ; Access shift directly on stack
-result_2    EQU 0Ch                 ; Access result directly on stack
-b_high      EQU 10h                 ; Access b_high directly on stack
-result_3    EQU 10h                 ; Access result directly on stack
-result_4    EQU 14h                 ; Access result directly on stack
-
-;----------------------------------------------------------------------------
-; void _PM_add64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Adds two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart  _PM_add64
-
-        mov     eax,[esp+a_low]
-        add     eax,[esp+b_low]
-        mov     edx,[esp+a_high]
-        adc     edx,[esp+b_high]
-        mov     ecx,[esp+result_4]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_sub64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Subtracts two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart  _PM_sub64
-
-        mov     eax,[esp+a_low]
-        sub     eax,[esp+b_low]
-        mov     edx,[esp+a_high]
-        sbb     edx,[esp+b_high]
-        mov     ecx,[esp+result_4]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_mul64(u32 a_high,u32 a_low,u32 b_high,u32 b_low,__u64 *result);
-;----------------------------------------------------------------------------
-; Multiples two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart  _PM_mul64
-
-        mov     eax,[esp+a_high]
-        mov     ecx,[esp+b_high]
-        or      ecx,eax
-        mov     ecx,[esp+b_low]
-        jnz     @@FullMultiply
-        mov     eax,[esp+a_low]         ; EDX:EAX = b.low * a.low
-        mul     ecx
-        mov     ecx,[esp+result_4]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-@@FullMultiply:
-        push    ebx
-        mul     ecx                     ; EDX:EAX = a.high * b.low
-        mov     ebx,eax
-        mov     eax,[esp+a_low+4]
-        mul     [DWORD esp+b_high+4]    ; EDX:EAX = b.high * a.low
-        add     ebx,eax
-        mov     eax,[esp+a_low+4]
-        mul     ecx                     ; EDX:EAX = a.low * b.low
-        add     edx,ebx
-        pop     ebx
-        mov     ecx,[esp+result_4]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_div64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Divides two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart  _PM_div64
-
-        push    edi
-        push    esi
-        push    ebx
-        xor     edi,edi
-        mov     eax,[esp+a_high+0Ch]
-        or      eax,eax
-        jns     @@ANotNeg
-
-; Dividend is negative, so negate it and save result for later
-
-        inc     edi
-        mov     edx,[esp+a_low+0Ch]
-        neg     eax
-        neg     edx
-        sbb     eax,0
-        mov     [esp+a_high+0Ch],eax
-        mov     [esp+a_low+0Ch],edx
-
-@@ANotNeg:
-        mov     eax,[esp+b_high+0Ch]
-        or      eax,eax
-        jns     @@BNotNeg
-
-; Divisor is negative, so negate it and save result for later
-
-        inc     edi
-        mov     edx,[esp+b_low+0Ch]
-        neg     eax
-        neg     edx
-        sbb     eax,0
-        mov     [esp+b_high+0Ch],eax
-        mov     [esp+b_low+0Ch],edx
-
-@@BNotNeg:
-        or      eax,eax
-        jnz     @@BHighNotZero
-
-; b.high is zero, so handle this faster
-
-        mov     ecx,[esp+b_low+0Ch]
-        mov     eax,[esp+a_high+0Ch]
-        xor     edx,edx
-        div     ecx
-        mov     ebx,eax
-        mov     eax,[esp+a_low+0Ch]
-        div     ecx
-        mov     edx,ebx
-        jmp     @@BHighZero
-
-@@BHighNotZero:
-        mov     ebx,eax
-        mov     ecx,[esp+b_low+0Ch]
-        mov     edx,[esp+a_high+0Ch]
-        mov     eax,[esp+a_low+0Ch]
-
-; Shift values right until b.high becomes zero
-
-@@ShiftLoop:
-        shr     ebx,1
-        rcr     ecx,1
-        shr     edx,1
-        rcr     eax,1
-        or      ebx,ebx
-        jnz     @@ShiftLoop
-
-; Now complete the divide process
-
-        div     ecx
-        mov     esi,eax
-        mul     [DWORD esp+b_high+0Ch]
-        mov     ecx,eax
-        mov     eax,[esp+b_low+0Ch]
-        mul     esi
-        add     edx,ecx
-        jb      @@8
-        cmp     edx,[esp+a_high+0Ch]
-        ja      @@8
-        jb      @@9
-        cmp     eax,[esp+a_low+0Ch]
-        jbe     @@9
-@@8:    dec     esi
-@@9:    xor     edx,edx
-        mov     eax,esi
-
-@@BHighZero:
-        dec     edi
-        jnz     @@Done
-
-; The result needs to be negated as either a or b was negative
-
-        neg     edx
-        neg     eax
-        sbb     edx,0
-
-@@Done: pop     ebx
-        pop     esi
-        pop     edi
-        mov     ecx,[esp+result_4]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_shr64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number right
-;----------------------------------------------------------------------------
-cprocstart  _PM_shr64
-
-        mov     eax,[esp+a_low]
-        mov     edx,[esp+a_high]
-        mov     cl,[esp+shift]
-        shrd    edx,eax,cl
-        mov     ecx,[esp+result_3]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_sar64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number right (signed)
-;----------------------------------------------------------------------------
-cprocstart  _PM_sar64
-
-        mov     eax,[esp+a_low]
-        mov     edx,[esp+a_high]
-        mov     cl,[esp+shift]
-        sar     edx,cl
-        rcr     eax,cl
-        mov     ecx,[esp+result_3]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_shl64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number left
-;----------------------------------------------------------------------------
-cprocstart  _PM_shl64
-
-        mov     eax,[esp+a_low]
-        mov     edx,[esp+a_high]
-        mov     cl,[esp+shift]
-        shld    edx,eax,cl
-        mov     ecx,[esp+result_3]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_neg64(u32 a_low,s32 a_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number left
-;----------------------------------------------------------------------------
-cprocstart  _PM_neg64
-
-        mov     eax,[esp+a_low]
-        mov     edx,[esp+a_high]
-        neg     eax
-        neg     edx
-        sbb     eax,0
-        mov     ecx,[esp+result_2]
-        mov     [ecx],eax
-        mov     [ecx+4],edx
-        ret
-
-cprocend
-
-
-endcodeseg  _int64
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm
deleted file mode 100644
index 0ff1ecf55d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm
+++ /dev/null
@@ -1,230 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler
-;* Environment: Intel x86, any OS
-;*
-;* Description: Assembly language support routines for reading analogue
-;*              joysticks.
-;*
-;****************************************************************************
-
-        ideal
-
-include "scitech.mac"           ; Memory model macros
-
-ifdef flatmodel
-
-header  _joy                    ; Set up memory model
-
-begcodeseg  _joy                ; Start of code segment
-
-;----------------------------------------------------------------------------
-; initTimer
-;----------------------------------------------------------------------------
-; Sets up 8253 timer 2 (PC speaker) to start timing, but not produce output.
-;----------------------------------------------------------------------------
-cprocstatic initTimer
-
-; Start timer 2 counting
-
-        in      al,61h
-        and     al,0FDh             ; Disable speaker output (just in case)
-        or      al,1
-        out     61h,al
-
-; Set the timer 2 count to 0 again to start the timing interval.
-
-        mov     al,10110100b        ; set up to load initial (timer 2)
-        out     43h,al              ; timer count
-        sub     al,al
-        out     42h,al              ; load count lsb
-        out     42h,al              ; load count msb
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; readTimer2
-;----------------------------------------------------------------------------
-; Reads the number of ticks from the 8253 timer chip using channel 2 (PC
-; speaker). This is non-destructive and does not screw up other libraries.
-;----------------------------------------------------------------------------
-cprocstatic readTimer
-
-        xor     al,al               ; Latch timer 0 command
-        out     43h,al              ; Latch timer
-        in      al,42h              ; least significant byte
-        mov     ah,al
-        in      al,42h              ; most significant byte
-        xchg    ah,al
-        and     eax,0FFFFh
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; exitTimer
-;----------------------------------------------------------------------------
-; Stops the 8253 timer 2 (PC speaker) counting
-;----------------------------------------------------------------------------
-cprocstatic exitTimer
-
-; Stop timer 2 from counting
-
-        push    eax
-        in      al,61h
-        and     al,0FEh
-        out     61h,al
-        
-; Some programs have a problem if we change the control port; better change it
-; to something they expect (mode 3 - square wave generator)...
-        mov     al,0B6h
-        out     43h,al
-        
-        pop     eax
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_readJoyAxis(int jmask,int *axis);
-;----------------------------------------------------------------------------
-; Function to poll the joystick to read the current axis positions.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_readJoyAxis
-
-        ARG     jmask:UINT, axis:DPTR
-
-        LOCAL   firstTick:UINT, lastTick:UINT, totalTicks:UINT = LocalSize
-
-        enter_c
-
-        mov     ebx,[jmask]
-        mov     edi,[axis]
-        mov     ecx,(1193180/100)
-        and     ebx,01111b          ; Mask out supported axes
-        mov     dx,201h             ; DX := joystick I/O port
-        call    initTimer           ; Start timer 2 counting
-        call    readTimer           ; Returns counter in EAX
-        mov     [lastTick],eax
-
-@@WaitStable:
-        in      al,dx
-        and     al,bl               ; Wait for the axes in question to be
-        jz      @@Stable            ;  done reading...
-        call    readTimer           ; Returns counter in EAX
-        xchg    eax,[lastTick]
-        cmp     eax,[lastTick]
-        jb      @@1
-        sub     eax,[lastTick]
-@@1:    add     [totalTicks],eax
-        cmp     [totalTicks],ecx    ; Check for timeout
-        jae     @@Stable
-        jmp     @@WaitStable
-
-@@Stable:
-        mov     al,0FFh
-        out     dx,al               ; Start joystick reading
-        call    initTimer           ; Start timer 2 counting
-        call    readTimer           ; Returns counter in EAX
-        mov     [firstTick],eax     ; Store initial count
-        mov     [lastTick],eax
-        mov     [DWORD totalTicks],0
-        cli
-
-@@PollLoop:
-        in      al,dx               ; Read Joystick port
-        not     al
-        and     al,bl               ; Mask off channels we don't want to read
-        jnz     @@AxisFlipped       ; See if any of the channels flipped
-        call    readTimer           ; Returns counter in EAX
-        xchg    eax,[lastTick]
-        cmp     eax,[lastTick]
-        jb      @@2
-        sub     eax,[lastTick]
-@@2:    add     [totalTicks],eax
-        cmp     [totalTicks],ecx    ; Check for timeout
-        jae     @@TimedOut
-        jmp     @@PollLoop
-
-@@AxisFlipped:
-        xor     esi,esi
-        mov     ah,1
-        test    al,ah
-        jnz     @@StoreCount        ; Joystick 1, X axis flipped
-        add     esi,4
-        mov     ah,2
-        test    al,ah
-        jnz     @@StoreCount        ; Joystick 1, Y axis flipped
-        add     esi,4
-        mov     ah,4
-        test    al,ah
-        jnz     @@StoreCount        ; Joystick 2, X axis flipped
-        add     esi,4               ; Joystick 2, Y axis flipped
-        mov     ah,8
-
-@@StoreCount:
-        or      bh,ah               ; Indicate this axis is active
-        xor     bl,ah               ; Unmark the channels that just tripped
-        call    readTimer           ; Returns counter in EAX
-        xchg    eax,[lastTick]
-        cmp     eax,[lastTick]
-        jb      @@3
-        sub     eax,[lastTick]
-@@3:    add     [totalTicks],eax
-        mov     eax,[totalTicks]
-        mov     [edi+esi],eax       ; Record the time this channel flipped
-        cmp     bl,0                ; If there are more channels to read,
-        jne     @@PollLoop          ;   keep looping
-
-@@TimedOut:
-        sti
-        call    exitTimer           ; Stop timer 2 counting
-        movzx   eax,bh              ; Return the mask of working axes
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_readJoyButtons(void);
-;----------------------------------------------------------------------------
-; Function to poll the current joystick buttons
-;----------------------------------------------------------------------------
-cprocstart  _EVT_readJoyButtons
-
-        mov     dx,0201h
-        in      al,dx
-        shr     al,4
-        not     al
-        and     eax,0Fh
-        ret
-
-cprocend
-
-endcodeseg  _joy
-
-endif
-
-        END                         ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm
deleted file mode 100644
index 1e0a6966ce..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm
+++ /dev/null
@@ -1,272 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 16/32 bit Ring 0 device driver
-;*
-;* Description: Assembler support routines for the Memory Type Range Register
-;*              (MTRR) module.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _mtrr               ; Set up memory model
-
-begdataseg  _mtrr
-
-ifdef   DOS4GW
-    cextern _PM_haveCauseWay,UINT
-endif
-
-enddataseg  _mtrr
-
-begcodeseg  _mtrr               ; Start of code segment
-
-P586
-
-;----------------------------------------------------------------------------
-; ibool _MTRR_isRing0(void);
-;----------------------------------------------------------------------------
-; Checks to see if we are running at ring 0. This check is only relevant
-; for 32-bit DOS4GW and compatible programs. If we are not running under
-; DOS4GW, then we simply assume we are a ring 0 device driver.
-;----------------------------------------------------------------------------
-cprocnear   _MTRR_isRing0
-
-; Are we running under CauseWay?
-
-ifdef   DOS4GW
-        enter_c
-        mov     ax,cs
-        and     eax,3
-        xor     eax,3
-        jnz     @@Exit
-
-; CauseWay runs the apps at ring 3, but implements support for specific
-; ring 0 instructions that we need to get stuff done under real DOS.
-
-        mov     eax,1
-        cmp     [UINT _PM_haveCauseWay],0
-        jnz     @@Exit
-@@Fail: xor     eax,eax
-@@Exit: leave_c
-        ret
-else
-ifdef __SMX32__
-        mov     eax,1                   ; SMX is ring 0!
-        ret
-else
-ifdef __VXD__
-        mov     eax,1                   ; VxD is ring 0!
-        ret
-else
-ifdef __NT_DRIVER__
-        mov     eax,1                   ; NT/W2K is ring 0!
-        ret
-else
-else
-        xor     eax,eax                 ; Assume ring 3 for 32-bit DOS
-        ret
-endif
-endif
-endif
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_disableInt
-
-        pushfd                  ; Put flag word on stack
-        cli                     ; Disable interrupts!
-        pop     eax             ; deposit flag word in return register
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_restoreInt
-
-        ARG     ps:ULONG
-
-        push    ebp
-        mov     ebp,esp         ; Set up stack frame
-        mov     ecx,[ps]
-        test    ecx,200h        ; SMP safe interrupt flag restore!
-        jz      @@1
-        sti
-@@1:    pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_saveCR4(void);
-;----------------------------------------------------------------------------
-; Save the value of CR4 and clear the Page Global Enable (bit 7). We also
-; disable and flush the caches.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_saveCR4
-
-        enter_c
-
-; Save value of CR4 and clear Page Global Enable (bit 7)
-
-        mov     ebx,cr4
-        mov     eax,ebx
-        and     al,7Fh
-        mov     cr4,eax
-
-; Disable and flush caches
-
-        mov     eax,cr0
-        or      eax,40000000h
-        wbinvd
-        mov     cr0,eax
-        wbinvd
-
-; Return value from CR4
-
-        mov     eax,ebx
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreCR4(ulong cr4Val)
-;----------------------------------------------------------------------------
-; Save the value of CR4 and clear the Page Global Enable (bit 7). We also
-; disable and flush the caches.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_restoreCR4
-
-        ARG     cr4Val:ULONG
-
-        enter_c
-
-; Enable caches
-
-        mov     eax,cr0
-        and     eax,0BFFFFFFFh
-        mov     cr0,eax
-        mov     eax,[cr4Val]
-        mov     cr4,eax
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_getCx86
-
-        ARG     reg:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        in      al,23h
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_setCx86
-
-        ARG     reg:UCHAR, val:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        mov     al,[val]
-        out     23h,al
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_readMSR(uong reg, ulong FAR *eax, ulong FAR *edx);
-;----------------------------------------------------------------------------
-; Writes the specific Machine Status Register used on the newer Intel
-; Pentium Pro and Pentium II motherboards.
-;----------------------------------------------------------------------------
-cprocnear   _MTRR_readMSR
-
-        ARG     reg:ULONG, v_eax:DPTR, v_edx:DPTR
-
-        enter_c
-        mov     ecx,[reg]
-        rdmsr
-        mov     ebx,[v_eax]
-        mov     [ebx],eax
-        mov     ebx,[v_edx]
-        mov     [ebx],edx
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_writeMSR(uong reg, ulong eax, ulong edx);
-;----------------------------------------------------------------------------
-; Writes the specific Machine Status Register used on the newer Intel
-; Pentium Pro and Pentium II motherboards.
-;----------------------------------------------------------------------------
-cprocnear   _MTRR_writeMSR
-
-        ARG     reg:ULONG, v_eax:ULONG, v_edx:ULONG
-
-        enter_c
-        mov     ecx,[reg]
-        mov     eax,[v_eax]
-        mov     edx,[v_edx]
-        wrmsr
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _mtrr
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm
deleted file mode 100644
index 5b8dbcc73a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm
+++ /dev/null
@@ -1,358 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: Any
-;*
-;* Description: Helper assembler functions for PCI access module.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header  _pcilib
-
-begcodeseg  _pcilib
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; uchar _ASMAPI _BIOS32_service(
-;   ulong service,
-;   ulong func,
-;   ulong *physBase,
-;   ulong *length,
-;   ulong *serviceOffset,
-;   PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Call the BIOS32 services directory
-;----------------------------------------------------------------------------
-cprocstart   _BIOS32_service
-
-        ARG     service:ULONG, func:ULONG, physBase:DPTR, len:DPTR, off:DPTR, entry:QWORD
-
-        enter_c
-        mov     eax,[service]
-        mov     ebx,[func]
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-        mov     esi,[physBase]
-        mov     [esi],ebx
-        mov     esi,[len]
-        mov     [esi],ecx
-        mov     esi,[off]
-        mov     [esi],edx
-        leave_c
-        ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; ushort _ASMAPI _PCIBIOS_isPresent(ulong i_eax,ulong *o_edx,ushort *oeax,
-;   uchar *o_cl,PCIBIOS_entry entry)
-;----------------------------------------------------------------------------
-; Call the PCI BIOS to determine if it is present.
-;----------------------------------------------------------------------------
-cprocstart   _PCIBIOS_isPresent
-
-        ARG     i_eax:ULONG, o_edx:DPTR, oeax:DPTR, o_cl:DPTR, entry:QWORD
-
-        enter_c
-        mov     eax,[i_eax]
-ifdef   flatmodel
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-else
-        int     1Ah
-endif
-        _les    _si,[o_edx]
-        mov     [_ES _si],edx
-        _les    _si,[oeax]
-        mov     [_ES _si],ax
-        _les    _si,[o_cl]
-        mov     [_ES _si],cl
-        mov     ax,bx
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PCIBIOS_service(ulong r_eax,ulong r_ebx,ulong r_edi,ulong r_ecx,
-;   PCIBIOS_entry entry)
-;----------------------------------------------------------------------------
-; Call the PCI BIOS services, either via the 32-bit protected mode entry
-; point or via the Int 1Ah 16-bit interrupt.
-;----------------------------------------------------------------------------
-cprocstart   _PCIBIOS_service
-
-        ARG     r_eax:ULONG, r_ebx:ULONG, r_edi:ULONG, r_ecx:ULONG, entry:QWORD
-
-        enter_c
-        mov     eax,[r_eax]
-        mov     ebx,[r_ebx]
-        mov     edi,[r_edi]
-        mov     ecx,[r_ecx]
-ifdef   flatmodel
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-else
-        int     1Ah
-endif
-        mov     eax,ecx
-ifndef  flatmodel
-        shld    edx,eax,16      ; Return result in DX:AX
-endif
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _PCIBIOS_getRouting(PCIRoutingOptionsBuffer *buf,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Get the routing options for PCI devices
-;----------------------------------------------------------------------------
-cprocstart   _PCIBIOS_getRouting
-
-        ARG     buf:DPTR, entry:QWORD
-
-        enter_c
-        mov     eax,0B10Eh
-        mov     bx,0
-        _les    _di,[buf]
-ifdef   flatmodel
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-else
-        int     1Ah
-endif
-        movzx   eax,ah
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ibool _PCIBIOS_setIRQ(int busDev,int intPin,int IRQ,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Change the IRQ routing for the PCI device
-;----------------------------------------------------------------------------
-cprocstart   _PCIBIOS_setIRQ
-
-        ARG     busDev:UINT, intPin:UINT, IRQ:UINT, entry:QWORD
-
-        enter_c
-        mov     eax,0B10Fh
-        mov     bx,[USHORT busDev]
-        mov     cl,[BYTE intPin]
-        mov     ch,[BYTE IRQ]
-ifdef   flatmodel
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-else
-        int     1Ah
-endif
-        mov     eax,1
-        jnc     @@1
-        xor     eax,eax         ; Function failed!
-@@1:    leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PCIBIOS_specialCycle(int bus,ulong data,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Generate a special cycle via the PCI BIOS.
-;----------------------------------------------------------------------------
-cprocstart   _PCIBIOS_specialCycle
-
-        ARG     bus:UINT, data:ULONG, entry:QWORD
-
-        enter_c
-        mov     eax,0B106h
-        mov     bh,[BYTE bus]
-        mov     ecx,[data]
-ifdef   flatmodel
-ifdef   USE_NASM
-        call far dword [entry]
-else
-        call    [FWORD entry]
-endif
-else
-        int     1Ah
-endif
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ushort _PCI_getCS(void)
-;----------------------------------------------------------------------------
-cprocstart   _PCI_getCS
-
-        mov     ax,cs
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_inpb(int port)
-;----------------------------------------------------------------------------
-; Reads a byte from the specified port
-;----------------------------------------------------------------------------
-cprocstart  PM_inpb
-
-        ARG     port:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        xor     _ax,_ax
-        mov     _dx,[port]
-        in      al,dx
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_inpw(int port)
-;----------------------------------------------------------------------------
-; Reads a word from the specified port
-;----------------------------------------------------------------------------
-cprocstart  PM_inpw
-
-        ARG     port:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        xor     _ax,_ax
-        mov     _dx,[port]
-        in      ax,dx
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong PM_inpd(int port)
-;----------------------------------------------------------------------------
-; Reads a word from the specified port
-;----------------------------------------------------------------------------
-cprocstart  PM_inpd
-
-        ARG     port:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        mov     _dx,[port]
-        in      eax,dx
-ifndef flatmodel
-        shld    edx,eax,16      ; DX:AX = result
-endif
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpb(int port,int value)
-;----------------------------------------------------------------------------
-; Write a byte to the specified port.
-;----------------------------------------------------------------------------
-cprocstart  PM_outpb
-
-        ARG     port:UINT, value:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        mov     _dx,[port]
-        mov     _ax,[value]
-        out     dx,al
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpw(int port,int value)
-;----------------------------------------------------------------------------
-; Write a word to the specified port.
-;----------------------------------------------------------------------------
-cprocstart  PM_outpw
-
-        ARG     port:UINT, value:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        mov     _dx,[port]
-        mov     _ax,[value]
-        out     dx,ax
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpd(int port,ulong value)
-;----------------------------------------------------------------------------
-; Write a word to the specified port.
-;----------------------------------------------------------------------------
-cprocstart  PM_outpd
-
-        ARG     port:UINT, value:ULONG
-
-        push    _bp
-        mov     _bp,_sp
-        mov     _dx,[port]
-        mov     eax,[value]
-        out     dx,eax
-        pop     _bp
-        ret
-
-cprocend
-
-endcodeseg  _pcilib
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/agp.c b/board/MAI/bios_emulator/scitech/src/pm/common/agp.c
deleted file mode 100644
index d53bc88e14..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/agp.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Ring 0 device driver
-*
-* Description:  Generic module to implement AGP support functions using the
-*               SciTech Nucleus AGP support drivers. If the OS provides
-*               native AGP support, this module should *NOT* be used. Instead
-*               wrappers should be placed around the OS support functions
-*               to implement this functionality.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifndef REALMODE
-#include "nucleus/agp.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static AGP_devCtx       *agp;
-static AGP_driverFuncs  driver;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-RETURNS:
-Size of AGP aperture in MB on success, 0 on failure.
-
-REMARKS:
-This function initialises the AGP driver in the system and returns the
-size of the available AGP aperture in megabytes.
-****************************************************************************/
-ulong PMAPI PM_agpInit(void)
-{
-    if ((agp = AGP_loadDriver(0)) == NULL)
-	return 0;
-    driver.dwSize = sizeof(driver);
-    if (!agp->QueryFunctions(AGP_GET_DRIVERFUNCS,&driver))
-	return 0;
-    switch (driver.GetApertureSize()) {
-	case agpSize4MB:    return 4;
-	case agpSize8MB:    return 8;
-	case agpSize16MB:   return 16;
-	case agpSize32MB:   return 32;
-	case agpSize64MB:   return 64;
-	case agpSize128MB:  return 128;
-	case agpSize256MB:  return 256;
-	case agpSize512MB:  return 512;
-	case agpSize1GB:    return 1024;
-	case agpSize2GB:    return 2048;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This function closes down the loaded AGP driver.
-****************************************************************************/
-void PMAPI PM_agpExit(void)
-{
-    AGP_unloadDriver(agp);
-}
-
-/****************************************************************************
-PARAMETERS:
-numPages    - Number of memory pages that should be reserved
-type        - Type of memory to allocate
-physContext - Returns the physical context handle for the mapping
-physAddr    - Returns the physical address for the mapping
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function reserves a range of physical memory addresses on the system
-bus which the AGP controller will respond to. If this function succeeds,
-the AGP controller can respond to the reserved physical address range on
-the bus. However you must first call AGP_commitPhysical to cause this memory
-to actually be committed for use before it can be accessed.
-****************************************************************************/
-ibool PMAPI PM_agpReservePhysical(
-    ulong numPages,
-    int type,
-    void **physContext,
-    PM_physAddr *physAddr)
-{
-    switch (type) {
-	case PM_agpUncached:
-	    type = agpUncached;
-	    break;
-	case PM_agpWriteCombine:
-	    type = agpWriteCombine;
-	    break;
-	case PM_agpIntelDCACHE:
-	    type = agpIntelDCACHE;
-	    break;
-	default:
-	    return false;
-	}
-    return driver.ReservePhysical(numPages,type,physContext,physAddr) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to release
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function releases a range of physical memory addresses on the system
-bus which the AGP controller will respond to. All committed memory for
-the physical address range covered by the context will be released.
-****************************************************************************/
-ibool PMAPI PM_agpReleasePhysical(
-    void *physContext)
-{
-    return driver.ReleasePhysical(physContext) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to commit memory for
-numPages    - Number of pages to be committed
-startOffset - Offset in pages into the reserved physical context
-physAddr    - Returns the physical address of the committed memory
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function commits into the specified physical context that was previously
-reserved by a call to ReservePhysical. You can use the startOffset and
-numPages parameters to only commit portions of the reserved memory range at
-a time.
-****************************************************************************/
-ibool PMAPI PM_agpCommitPhysical(
-    void *physContext,
-    ulong numPages,
-    ulong startOffset,
-    PM_physAddr *physAddr)
-{
-    return driver.CommitPhysical(physContext,numPages,startOffset,physAddr) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to free memory for
-numPages    - Number of pages to be freed
-startOffset - Offset in pages into the reserved physical context
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function frees memory previously committed by the CommitPhysical
-function. Note that you can free a portion of a memory range that was
-previously committed if you wish.
-****************************************************************************/
-ibool PMAPI PM_agpFreePhysical(
-    void *physContext,
-    ulong numPages,
-    ulong startOffset)
-{
-    return driver.FreePhysical(physContext,numPages,startOffset) == nOK;
-}
-
-#endif  /* !REALMODE */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c b/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c
deleted file mode 100644
index 36867bdba7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Direct keyboard event handling module. This module contains
-*               code to process raw scan code information, convert it to
-*               virtual scan codes and do code page translation to ASCII
-*               for different international keyboard layouts.
-*
-****************************************************************************/
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Keyboard scan code to translate
-table       - Code page table to search
-count       - Number of entries in the code page table
-
-REMARKS:
-This function translates the scan codes from keyboard scan codes to ASCII
-codes using a binary search on the code page table.
-****************************************************************************/
-static uchar translateScan(
-    uchar scanCode,
-    codepage_entry_t *table,
-    int count)
-{
-    codepage_entry_t    *test;
-    int                 n,pivot,val;
-
-    for (n = count; n > 0; ) {
-	pivot = n >> 1;
-	test = table + pivot;
-	val = scanCode - test->scanCode;
-	if (val < 0)
-	    n = pivot;
-	else if (val == 0)
-	    return test->asciiCode;
-	else {
-	    table = test + 1;
-	    n -= pivot + 1;
-	    }
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-{secret}
-****************************************************************************/
-void _EVT_maskKeyCode(
-    event_t *evt)
-{
-    int ascii,scan = EVT_scanCode(evt->message);
-
-    evt->message &= ~0xFF;
-    if (evt->modifiers & EVT_NUMLOCK) {
-	if ((ascii = translateScan(scan,EVT.codePage->numPad,EVT.codePage->numPadLen)) != 0) {
-	    evt->message |= ascii;
-	    return;
-	    }
-	}
-    if (evt->modifiers & EVT_CTRLSTATE) {
-	evt->message |= translateScan(scan,EVT.codePage->ctrl,EVT.codePage->ctrlLen);
-	return;
-	}
-    if (evt->modifiers & EVT_CAPSLOCK) {
-	if (evt->modifiers & EVT_SHIFTKEY) {
-	    if ((ascii = translateScan(scan,EVT.codePage->shiftCaps,EVT.codePage->shiftCapsLen)) != 0) {
-		evt->message |= ascii;
-		return;
-		}
-	    }
-	else {
-	    if ((ascii = translateScan(scan,EVT.codePage->caps,EVT.codePage->capsLen)) != 0) {
-		evt->message |= ascii;
-		return;
-		}
-	    }
-	}
-    if (evt->modifiers & EVT_SHIFTKEY) {
-	if ((ascii = translateScan(scan,EVT.codePage->shift,EVT.codePage->shiftLen)) != 0) {
-	    evt->message |= ascii;
-	    return;
-	    }
-	}
-    evt->message |= translateScan(scan,EVT.codePage->normal,EVT.codePage->normalLen);
-}
-
-/****************************************************************************
-REMARKS:
-Returns true if the key with the specified scan code is being held down.
-****************************************************************************/
-static ibool _EVT_isKeyDown(
-    uchar scanCode)
-{
-    if (scanCode > 0x7F)
-	return false;
-    else
-	return EVT.keyTable[scanCode] != 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-what        - Event code
-message     - Event message (ASCII code and scan code)
-
-REMARKS:
-Adds a new keyboard event to the event queue. This routine is called from
-within the keyboard interrupt subroutine!
-
-NOTE:   Interrupts are OFF when this routine is called by the keyboard ISR,
-	and we leave them OFF the entire time.
-****************************************************************************/
-static void addKeyEvent(
-    uint what,
-    uint message)
-{
-    event_t evt;
-
-    if (EVT.count < EVENTQSIZE) {
-	/* Save information in event record */
-	evt.when = _EVT_getTicks();
-	evt.what = what;
-	evt.message = message | 0x10000UL;
-	evt.where_x = 0;
-	evt.where_y = 0;
-	evt.relative_x = 0;
-	evt.relative_y = 0;
-	evt.modifiers = EVT.keyModifiers;
-	if (evt.what == EVT_KEYREPEAT) {
-	    if (EVT.oldKey != -1)
-		EVT.evtq[EVT.oldKey].message += 0x10000UL;
-	    else {
-		EVT.oldKey = EVT.freeHead;
-		addEvent(&evt);         /* Add to tail of event queue   */
-		}
-	    }
-	else {
-#ifdef __QNX__
-	    _EVT_maskKeyCode(&evt);
-#endif
-	    addEvent(&evt);             /* Add to tail of event queue   */
-	    }
-	EVT.oldMove = -1;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function waits for the keyboard controller to set the ready-for-write
-bit.
-****************************************************************************/
-static int kbWaitForWriteReady(void)
-{
-    int timeout = 8192;
-    while ((timeout > 0) && (PM_inpb(0x64) & 0x02))
-	timeout--;
-    return (timeout > 0);
-}
-
-/****************************************************************************
-REMARKS:
-This function waits for the keyboard controller to set the ready-for-read
-bit.
-****************************************************************************/
-static int kbWaitForReadReady(void)
-{
-    int timeout = 8192;
-    while ((timeout > 0) && (!(PM_inpb(0x64) & 0x01)))
-	timeout--;
-    return (timeout > 0);
-}
-
-/****************************************************************************
-PARAMETERS:
-data    - Data to send to the keyboard
-
-REMARKS:
-This function sends a data byte to the keyboard controller.
-****************************************************************************/
-static int kbSendData(
-    uchar data)
-{
-    int resends = 4;
-    int timeout, temp;
-
-    do {
-	if (!kbWaitForWriteReady())
-	    return 0;
-	PM_outpb(0x60,data);
-	timeout = 8192;
-	while (--timeout > 0) {
-	    if (!kbWaitForReadReady())
-		return 0;
-	    temp = PM_inpb(0x60);
-	    if (temp == 0xFA)
-		return 1;
-	    if (temp == 0xFE)
-		break;
-	    }
-	} while ((resends-- > 0) && (timeout > 0));
-    return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-modifiers   - Keyboard modifier flags
-
-REMARKS:
-This function re-programs the LED's on the keyboard to the values stored
-in the passed in modifier flags. If the 'allowLEDS' flag is false, this
-function does nothing.
-****************************************************************************/
-static void setLEDS(
-    uint modifiers)
-{
-    if (EVT.allowLEDS) {
-	if (!kbSendData(0xED) || !kbSendData((modifiers>>9) & 7)) {
-	    kbSendData(0xF4);
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Function to process raw scan codes read from the keyboard controller.
-
-NOTE:   Interrupts are OFF when this routine is called by the keyboard ISR,
-	and we leave them OFF the entire time.
-{secret}
-****************************************************************************/
-void processRawScanCode(
-    int scan)
-{
-    static int  pauseLoop = 0;
-    static int  extended = 0;
-    int         what;
-
-    if (pauseLoop) {
-	/* Skip scan codes until the pause key sequence has been read */
-	pauseLoop--;
-	}
-    else if (scan == 0xE0) {
-	/* This signals the start of an extended scan code sequence */
-	extended = 1;
-	}
-    else if (scan == 0xE1) {
-	/* The Pause key sends a strange scan code sequence, which is:
-	 *
-	 *  E1 1D 52 E1 9D D2
-	 *
-	 * However there is never any release code nor any auto-repeat for
-	 * this key. For this reason we simply ignore the key and skip the
-	 * next 5 scan codes read from the keyboard.
-	 */
-	pauseLoop = 5;
-	}
-    else {
-	/* Process the scan code normally (it may be an extended code
-	 * however!). Bit 7 means key was released, and bits 0-6 are the
-	 * scan code.
-	 */
-	what = (scan & 0x80) ? EVT_KEYUP : EVT_KEYDOWN;
-	scan &= 0x7F;
-	if (extended) {
-	    extended = 0;
-	    if (scan == 0x2A || scan == 0x36) {
-		/* Ignore these extended scan code sequences. These are
-		 * used by the keyboard controller to wrap around certain
-		 * key sequences for the keypad (and when NUMLOCK is down
-		 * internally).
-		 */
-		return;
-		}
-
-	    /* Convert extended codes for key sequences that we map to
-	     * virtual scan codes so the user can detect them in their
-	     * code.
-	     */
-	    switch (scan) {
-		case KB_leftCtrl:   scan = KB_rightCtrl;    break;
-		case KB_leftAlt:    scan = KB_rightAlt;     break;
-		case KB_divide:     scan = KB_padDivide;    break;
-		case KB_enter:      scan = KB_padEnter;     break;
-		case KB_padTimes:   scan = KB_sysReq;       break;
-		}
-	    }
-	else {
-	    /* Convert regular scan codes for key sequences that we map to
-	     * virtual scan codes so the user can detect them in their
-	     * code.
-	     */
-	    switch (scan) {
-		case KB_left:       scan = KB_padLeft;      break;
-		case KB_right:      scan = KB_padRight;     break;
-		case KB_up:         scan = KB_padUp;        break;
-		case KB_down:       scan = KB_padDown;      break;
-		case KB_insert:     scan = KB_padInsert;    break;
-		case KB_delete:     scan = KB_padDelete;    break;
-		case KB_home:       scan = KB_padHome;      break;
-		case KB_end:        scan = KB_padEnd;       break;
-		case KB_pageUp:     scan = KB_padPageUp;    break;
-		case KB_pageDown:   scan = KB_padPageDown;  break;
-		}
-	    }
-
-	/* Determine if the key is an UP, DOWN or REPEAT and maintain the
-	 * up/down status of all keys in our global key array.
-	 */
-	if (what == EVT_KEYDOWN) {
-	    if (EVT.keyTable[scan])
-		what = EVT_KEYREPEAT;
-	    else
-		EVT.keyTable[scan] = scan;
-	    }
-	else {
-	    EVT.keyTable[scan] = 0;
-	    }
-
-	/* Handle shift key modifiers */
-	if (what != EVT_KEYREPEAT) {
-	    switch (scan) {
-		case KB_capsLock:
-		    if (what == EVT_KEYDOWN)
-			EVT.keyModifiers ^= EVT_CAPSLOCK;
-		    setLEDS(EVT.keyModifiers);
-		    break;
-		case KB_numLock:
-		    if (what == EVT_KEYDOWN)
-			EVT.keyModifiers ^= EVT_NUMLOCK;
-		    setLEDS(EVT.keyModifiers);
-		    break;
-		case KB_scrollLock:
-		    if (what == EVT_KEYDOWN)
-			EVT.keyModifiers ^= EVT_SCROLLLOCK;
-		    setLEDS(EVT.keyModifiers);
-		    break;
-		case KB_leftShift:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_LEFTSHIFT;
-		    else
-			EVT.keyModifiers |= EVT_LEFTSHIFT;
-		    break;
-		case KB_rightShift:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_RIGHTSHIFT;
-		    else
-			EVT.keyModifiers |= EVT_RIGHTSHIFT;
-		    break;
-		case KB_leftCtrl:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_LEFTCTRL;
-		    else
-			EVT.keyModifiers |= EVT_LEFTCTRL;
-		    break;
-		case KB_rightCtrl:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_RIGHTCTRL;
-		    else
-			EVT.keyModifiers |= EVT_RIGHTCTRL;
-		    break;
-		case KB_leftAlt:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_LEFTALT;
-		    else
-			EVT.keyModifiers |= EVT_LEFTALT;
-		    break;
-		case KB_rightAlt:
-		    if (what == EVT_KEYUP)
-			EVT.keyModifiers &= ~EVT_RIGHTALT;
-		    else
-			EVT.keyModifiers |= EVT_RIGHTALT;
-		    break;
-#ifdef SUPPORT_CTRL_ALT_DEL
-		case KB_delete:
-		    if ((EVT.keyModifiers & EVT_CTRLSTATE) && (EVT.keyModifiers & EVT_ALTSTATE))
-			Reboot();
-		    break;
-#endif
-		}
-	    }
-
-	/* Add the untranslated key code to the event queue. All
-	 * translation to ASCII from the key codes occurs when the key
-	 * is extracted from the queue, saving time in the low level
-	 * interrupt handler.
-	 */
-	addKeyEvent(what,scan << 8);
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Enables/disables the update of the keyboard LED status indicators.
-
-HEADER:
-event.h
-
-PARAMETERS:
-enable  - True to enable, false to disable
-
-REMARKS:
-Enables the update of the keyboard LED status indicators. Sometimes it may
-be convenient in the application to turn off the updating of the LED
-status indicators (such as if a game is using the CAPSLOCK key for some
-function). Passing in a value of FALSE to this function will turn off all
-the LEDS, and stop updating them when the internal status changes (note
-however that internally we still keep track of the toggle key status!).
-****************************************************************************/
-void EVTAPI EVT_allowLEDS(
-    ibool enable)
-{
-    EVT.allowLEDS = true;
-    if (enable)
-	setLEDS(EVT.keyModifiers);
-    else
-	setLEDS(0);
-    EVT.allowLEDS = enable;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c b/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c
deleted file mode 100644
index 83ef22113c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module for implementing the PM library overrideable memory
-*               allocator functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-void * (*__PM_malloc)(size_t size)              = malloc;
-void * (*__PM_calloc)(size_t nelem,size_t size) = calloc;
-void * (*__PM_realloc)(void *ptr,size_t size)   = realloc;
-void (*__PM_free)(void *p)                      = free;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Use local memory allocation routines.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-malloc  - Pointer to new malloc routine to use
-calloc  - Pointer to new caalloc routine to use
-realloc - Pointer to new realloc routine to use
-free    - Pointer to new free routine to use
-
-REMARKS:
-Tells the PM library to use a set of user specified memory allocation
-routines instead of using the normal malloc/calloc/realloc/free standard
-C library functions. This is useful if you wish to use a third party
-debugging malloc library or perhaps a set of faster memory allocation
-functions with the PM library, or any apps that use the PM library (such as
-the MGL). Once you have registered your memory allocation routines, all
-calls to PM_malloc, PM_calloc, PM_realloc and PM_free will be revectored to
-your local memory allocation routines.
-
-This is also useful if you need to keep track of just how much physical
-memory your program has been using. You can use the PM_availableMemory
-function to find out how much physical memory is available when the program
-starts, and then you can use your own local memory allocation routines to
-keep track of how much memory has been used and freed.
-
-NOTE: This function should be called right at the start of your application,
-      before you initialise any other components or libraries.
-
-NOTE: Code compiled into Binary Portable DLL's and Drivers automatically
-      end up calling these functions via the BPD C runtime library.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_realloc, PM_free, PM_availableMemory
-****************************************************************************/
-void PMAPI PM_useLocalMalloc(
-    void * (*malloc)(size_t size),
-    void * (*calloc)(size_t nelem,size_t size),
-    void * (*realloc)(void *ptr,size_t size),
-    void (*free)(void *p))
-{
-    __PM_malloc = malloc;
-    __PM_calloc = calloc;
-    __PM_realloc = realloc;
-    __PM_free = free;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Allocate a block of memory.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-size    - Size of block to allocate in bytes
-
-RETURNS:
-Pointer to allocated block, or NULL if out of memory.
-
-REMARKS:
-Allocates a block of memory of length size. If you have changed the memory
-allocation routines with the PM_useLocalMalloc function, then calls to this
-function will actually make calls to the local memory allocation routines
-that you have registered.
-
-SEE ALSO:
-PM_calloc, PM_realloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_malloc(
-    size_t size)
-{
-    return __PM_malloc(size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Allocate and clear a large memory block.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-nelem   - number of contiguous size-byte units to allocate
-size    - size of unit in bytes
-
-RETURNS:
-Pointer to allocated memory if successful, NULL if out of memory.
-
-REMARKS:
-Allocates a block of memory of length (size * nelem), and clears the
-allocated area with zeros (0). If you have changed the memory allocation
-routines with the PM_useLocalMalloc function, then calls to this function
-will actually make calls to the local memory allocation routines that you
-have registered.
-
-SEE ALSO:
-PM_malloc, PM_realloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_calloc(
-    size_t nelem,
-    size_t size)
-{
-    return __PM_calloc(nelem,size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Re-allocate a block of memory
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-ptr     - Pointer to block to resize
-size    - size of unit in bytes
-
-RETURNS:
-Pointer to allocated memory if successful, NULL if out of memory.
-
-REMARKS:
-This function reallocates a block of memory that has been previously been
-allocated to the new of size. The new size may be smaller or larger than
-the original block of memory. If you have changed the memory allocation
-routines with the PM_useLocalMalloc function, then calls to this function
-will actually make calls to the local memory allocation routines that you
-have registered.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_realloc(
-    void *ptr,
-    size_t size)
-{
-    return __PM_realloc(ptr,size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Frees a block of memory.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-p   - Pointer to memory block to free
-
-REMARKS:
-Frees a block of memory previously allocated with either PM_malloc,
-PM_calloc or PM_realloc.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_realloc, PM_useLocalMalloc
-****************************************************************************/
-void PMAPI PM_free(
-    void *p)
-{
-    __PM_free(p);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c b/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c
deleted file mode 100644
index eed5f45c9e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*               Heavily based on code copyright (C) Richard Gooch
-*
-* Language:     ANSI C
-* Environment:  32-bit Ring 0 device driver
-*
-* Description:  Generic Memory Type Range Register (MTRR) functions to
-*               manipulate the MTRR registers on supported CPU's. This code
-*               *must* run at ring 0, so you can't normally include this
-*               code directly in normal applications (the except is DOS4GW
-*               apps which run at ring 0 under real DOS). Thus this code
-*               will normally be compiled into a ring 0 device driver for
-*               the target operating system.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "ztimerc.h"
-#include "mtrr.h"
-
-#ifndef REALMODE
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* Intel pre-defined MTRR registers */
-
-#define NUM_FIXED_RANGES        88
-#define INTEL_cap_MSR           0x0FE
-#define INTEL_defType_MSR       0x2FF
-#define INTEL_fix64K_00000_MSR  0x250
-#define INTEL_fix16K_80000_MSR  0x258
-#define INTEL_fix16K_A0000_MSR  0x259
-#define INTEL_fix4K_C0000_MSR   0x268
-#define INTEL_fix4K_C8000_MSR   0x269
-#define INTEL_fix4K_D0000_MSR   0x26A
-#define INTEL_fix4K_D8000_MSR   0x26B
-#define INTEL_fix4K_E0000_MSR   0x26C
-#define INTEL_fix4K_E8000_MSR   0x26D
-#define INTEL_fix4K_F0000_MSR   0x26E
-#define INTEL_fix4K_F8000_MSR   0x26F
-
-/* Macros to find the address of a paricular MSR register */
-
-#define INTEL_physBase_MSR(reg) (0x200 + 2 * (reg))
-#define INTEL_physMask_MSR(reg) (0x200 + 2 * (reg) + 1)
-
-/* Cyrix CPU configuration register indexes */
-#define CX86_CCR0 0xC0
-#define CX86_CCR1 0xC1
-#define CX86_CCR2 0xC2
-#define CX86_CCR3 0xC3
-#define CX86_CCR4 0xE8
-#define CX86_CCR5 0xE9
-#define CX86_CCR6 0xEA
-#define CX86_DIR0 0xFE
-#define CX86_DIR1 0xFF
-#define CX86_ARR_BASE 0xC4
-#define CX86_RCR_BASE 0xDC
-
-/* Structure to maintain machine state while updating MTRR registers */
-
-typedef struct {
-    ulong   flags;
-    ulong   defTypeLo;
-    ulong   defTypeHi;
-    ulong   cr4Val;
-    ulong   ccr3;
-    } MTRRContext;
-
-static int      numMTRR = -1;
-static int      cpuFamily,cpuType,cpuStepping;
-static void     (*getMTRR)(uint reg,ulong *base,ulong *size,int *type) = NULL;
-static void     (*setMTRR)(uint reg,ulong base,ulong size,int type) = NULL;
-static int      (*getFreeRegion)(ulong base,ulong size) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-RETURNS:
-Returns non-zero if we have the write-combining memory type
-****************************************************************************/
-static int MTRR_haveWriteCombine(void)
-{
-    ulong   config,dummy;
-
-    switch (cpuFamily) {
-	case CPU_AMD:
-	    if (cpuType < CPU_AMDAthlon) {
-		/* AMD K6-2 stepping 8 and later support the MTRR registers.
-		 * The earlier K6-2 steppings (300Mhz models) do not
-		 * support MTRR's.
-		 */
-		if ((cpuType < CPU_AMDK6_2) || (cpuType == CPU_AMDK6_2 && cpuStepping < 8))
-		    return 0;
-		return 1;
-		}
-	    /* Fall through for AMD Athlon which uses P6 style MTRR's */
-	case CPU_Intel:
-	    _MTRR_readMSR(INTEL_cap_MSR,&config,&dummy);
-	    return (config & (1 << 10));
-	case CPU_Cyrix:
-	    /* Cyrix 6x86 and later support the MTRR registers */
-	    if (cpuType < CPU_Cyrix6x86)
-		return 0;
-	    return 1;
-	}
-    return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Generic function to find the location of a free MTRR register to be used
-for creating a new mapping.
-****************************************************************************/
-static int GENERIC_getFreeRegion(
-    ulong base,
-    ulong size)
-{
-    int     i,ltype;
-    ulong   lbase,lsize;
-
-    for (i = 0; i < numMTRR; i++) {
-	getMTRR(i,&lbase,&lsize,&ltype);
-	if (lsize < 1)
-	    return i;
-	}
-    (void)base;
-    (void)size;
-    return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Generic function to find the location of a free MTRR register to be used
-for creating a new mapping.
-****************************************************************************/
-static int AMDK6_getFreeRegion(
-    ulong base,
-    ulong size)
-{
-    int     i,ltype;
-    ulong   lbase,lsize;
-
-    for (i = 0; i < numMTRR; i++) {
-	getMTRR(i,&lbase,&lsize,&ltype);
-	if (lsize < 1)
-	    return i;
-	}
-    (void)base;
-    (void)size;
-    return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Cyrix specific function to find the location of a free MTRR register to be
-used for creating a new mapping.
-****************************************************************************/
-static int CYRIX_getFreeRegion(
-    ulong base,
-    ulong size)
-{
-    int     i,ltype;
-    ulong   lbase, lsize;
-
-    if (size > 0x2000000UL) {
-	/* If we are to set up a region >32M then look at ARR7 immediately */
-	getMTRR(7,&lbase,&lsize,&ltype);
-	if (lsize < 1)
-	    return 7;
-	}
-    else {
-	/* Check ARR0-6 registers */
-	for (i = 0; i < 7; i++) {
-	    getMTRR(i,&lbase,&lsize,&ltype);
-	    if (lsize < 1)
-		return i;
-	    }
-	/* Try ARR7 but its size must be at least 256K */
-	getMTRR(7,&lbase,&lsize,&ltype);
-	if ((lsize < 1) && (size >= 0x40000))
-	    return i;
-	}
-    (void)base;
-    return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-c   - Place to store the machine context across the call
-
-REMARKS:
-Puts the processor into a state where MTRRs can be safely updated
-****************************************************************************/
-static void MTRR_beginUpdate(
-    MTRRContext *c)
-{
-    c->flags = _MTRR_disableInt();
-    if (cpuFamily != CPU_AMD || (cpuFamily == CPU_AMD && cpuType >= CPU_AMDAthlon)) {
-	switch (cpuFamily) {
-	    case CPU_Intel:
-	    case CPU_AMD:
-		/* Disable MTRRs, and set the default type to uncached */
-		c->cr4Val = _MTRR_saveCR4();
-		_MTRR_readMSR(INTEL_defType_MSR,&c->defTypeLo,&c->defTypeHi);
-		_MTRR_writeMSR(INTEL_defType_MSR,c->defTypeLo & 0xF300UL,c->defTypeHi);
-		break;
-	    case CPU_Cyrix:
-		c->ccr3 = _MTRR_getCx86(CX86_CCR3);
-		_MTRR_setCx86(CX86_CCR3, (uchar)((c->ccr3 & 0x0F) | 0x10));
-		break;
-	    }
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-c   - Place to restore the machine context from
-
-REMARKS:
-Restores the processor after updating any of the registers
-****************************************************************************/
-static void MTRR_endUpdate(
-    MTRRContext *c)
-{
-    if (cpuFamily != CPU_AMD || (cpuFamily == CPU_AMD && cpuType >= CPU_AMDAthlon)) {
-	PM_flushTLB();
-	switch (cpuFamily) {
-	    case CPU_Intel:
-	    case CPU_AMD:
-		_MTRR_writeMSR(INTEL_defType_MSR,c->defTypeLo,c->defTypeHi);
-		_MTRR_restoreCR4(c->cr4Val);
-		break;
-	    case CPU_Cyrix:
-		_MTRR_setCx86(CX86_CCR3,(uchar)c->ccr3);
-		break;
-	    }
-	}
-
-    /* Re-enable interrupts (if enabled previously) */
-    _MTRR_restoreInt(c->flags);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to read
-base    - Place to store the starting physical base address of the region
-size    - Place to store the size in bytes of the region
-type    - Place to store the type of the MTRR register
-
-REMARKS:
-Intel specific function to read the value of a specific MTRR register.
-****************************************************************************/
-static void INTEL_getMTRR(
-    uint reg,
-    ulong *base,
-    ulong *size,
-    int *type)
-{
-    ulong hi,maskLo,baseLo;
-
-    _MTRR_readMSR(INTEL_physMask_MSR(reg),&maskLo,&hi);
-    if ((maskLo & 0x800) == 0) {
-	/* MTRR is disabled, so it is free */
-	*base = 0;
-	*size = 0;
-	*type = 0;
-	return;
-	}
-    _MTRR_readMSR(INTEL_physBase_MSR(reg),&baseLo,&hi);
-    maskLo = (maskLo & 0xFFFFF000UL);
-    *size = ~(maskLo - 1);
-    *base = (baseLo & 0xFFFFF000UL);
-    *type = (baseLo & 0xFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to set
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void INTEL_setMTRR(
-    uint reg,
-    ulong base,
-    ulong size,
-    int type)
-{
-    MTRRContext c;
-
-    MTRR_beginUpdate(&c);
-    if (size == 0) {
-	/* The invalid bit is kept in the mask, so we simply clear the
-	 * relevant mask register to disable a range.
-	 */
-	_MTRR_writeMSR(INTEL_physMask_MSR(reg),0,0);
-	}
-    else {
-	_MTRR_writeMSR(INTEL_physBase_MSR(reg),base | type,0);
-	_MTRR_writeMSR(INTEL_physMask_MSR(reg),~(size - 1) | 0x800,0);
-	}
-    MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-Disabled banked write combing for Intel processors. We always disable this
-because it invariably causes problems with older hardware.
-****************************************************************************/
-static void INTEL_disableBankedWriteCombine(void)
-{
-    MTRRContext c;
-
-    MTRR_beginUpdate(&c);
-    _MTRR_writeMSR(INTEL_fix16K_A0000_MSR,0,0);
-    MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to set
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void AMD_getMTRR(
-    uint reg,
-    ulong *base,
-    ulong *size,
-    int *type)
-{
-    ulong   low,high;
-
-    /*  Upper dword is region 1, lower is region 0  */
-    _MTRR_readMSR(0xC0000085, &low, &high);
-    if (reg == 1)
-	low = high;
-
-    /* Find the base and type for the region */
-    *base = low & 0xFFFE0000;
-    *type = 0;
-    if (low & 1)
-	*type = PM_MTRR_UNCACHABLE;
-    if (low & 2)
-	*type = PM_MTRR_WRCOMB;
-    if ((low & 3) == 0) {
-	*size = 0;
-	return;
-	}
-
-    /* This needs a little explaining. The size is stored as an
-     * inverted mask of bits of 128K granularity 15 bits long offset
-     * 2 bits
-     *
-     * So to get a size we do invert the mask and add 1 to the lowest
-     * mask bit (4 as its 2 bits in). This gives us a size we then shift
-     * to turn into 128K blocks
-     *
-     *  eg              111 1111 1111 1100      is 512K
-     *
-     *  invert          000 0000 0000 0011
-     *  +1              000 0000 0000 0100
-     *  *128K   ...
-     */
-    low = (~low) & 0x0FFFC;
-    *size = (low + 4) << 15;
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to set
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void AMD_setMTRR(
-    uint reg,
-    ulong base,
-    ulong size,
-    int type)
-{
-    ulong       low,high,newVal;
-    MTRRContext c;
-
-    MTRR_beginUpdate(&c);
-    _MTRR_readMSR(0xC0000085, &low, &high);
-    if (size == 0) {
-	/* Clear register to disable */
-	if (reg)
-	    high = 0;
-	else
-	    low = 0;
-	}
-    else {
-	/* Set the register to the base (already shifted for us), the
-	 * type (off by one) and an inverted bitmask of the size
-	 * The size is the only odd bit. We are fed say 512K
-	 * We invert this and we get 111 1111 1111 1011 but
-	 * if you subtract one and invert you get the desired
-	 * 111 1111 1111 1100 mask
-	 */
-	newVal = (((~(size-1)) >> 15) & 0x0001FFFC) | base | (type+1);
-	if (reg)
-	    high = newVal;
-	else
-	    low = newVal;
-	}
-
-    /* The writeback rule is quite specific. See the manual. Its
-     * disable local interrupts, write back the cache, set the MTRR
-     */
-    PM_flushTLB();
-    _MTRR_writeMSR(0xC0000085, low, high);
-    MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to set
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void CYRIX_getMTRR(
-    uint reg,
-    ulong *base,
-    ulong *size,
-    int *type)
-{
-    MTRRContext c;
-    uchar       arr = CX86_ARR_BASE + reg*3;
-    uchar       rcr,shift;
-
-    /* Save flags and disable interrupts */
-    MTRR_beginUpdate(&c);
-    ((uchar*)base)[3]  = _MTRR_getCx86(arr);
-    ((uchar*)base)[2]  = _MTRR_getCx86((uchar)(arr+1));
-    ((uchar*)base)[1]  = _MTRR_getCx86((uchar)(arr+2));
-    rcr = _MTRR_getCx86((uchar)(CX86_RCR_BASE + reg));
-    MTRR_endUpdate(&c);
-
-    /* Enable interrupts if it was enabled previously */
-    shift = ((uchar*)base)[1] & 0x0f;
-    *base &= 0xFFFFF000UL;
-
-    /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
-     * Note: shift==0xF means 4G, this is unsupported.
-     */
-    if (shift)
-	*size = (reg < 7 ? 0x800UL : 0x20000UL) << shift;
-    else
-	*size = 0;
-
-    /* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */
-    if (reg < 7) {
-	switch (rcr) {
-	    case  1: *type = PM_MTRR_UNCACHABLE; break;
-	    case  8: *type = PM_MTRR_WRBACK;     break;
-	    case  9: *type = PM_MTRR_WRCOMB;     break;
-	    case 24:
-	    default: *type = PM_MTRR_WRTHROUGH;  break;
-	    }
-	}
-    else {
-	switch (rcr) {
-	    case  0: *type = PM_MTRR_UNCACHABLE; break;
-	    case  8: *type = PM_MTRR_WRCOMB;     break;
-	    case  9: *type = PM_MTRR_WRBACK;     break;
-	    case 25:
-	    default: *type = PM_MTRR_WRTHROUGH;  break;
-	    }
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-reg     - MTRR register to set
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void CYRIX_setMTRR(
-    uint reg,
-    ulong base,
-    ulong size,
-    int type)
-{
-    MTRRContext c;
-    uchar       arr = CX86_ARR_BASE + reg*3;
-    uchar       arr_type,arr_size;
-
-    /* Count down from 32M (ARR0-ARR6) or from 2G (ARR7) */
-    size >>= (reg < 7 ? 12 : 18);
-    size &= 0x7FFF; /* Make sure arr_size <= 14 */
-    for (arr_size = 0; size; arr_size++, size >>= 1)
-	;
-    if (reg < 7) {
-	switch (type) {
-	    case PM_MTRR_UNCACHABLE:    arr_type =  1; break;
-	    case PM_MTRR_WRCOMB:        arr_type =  9; break;
-	    case PM_MTRR_WRTHROUGH:     arr_type = 24; break;
-	    default:                    arr_type =  8; break;
-	    }
-	}
-    else {
-	switch (type) {
-	    case PM_MTRR_UNCACHABLE:    arr_type =  0; break;
-	    case PM_MTRR_WRCOMB:        arr_type =  8; break;
-	    case PM_MTRR_WRTHROUGH:     arr_type = 25; break;
-	    default:                    arr_type =  9; break;
-	    }
-	}
-    MTRR_beginUpdate(&c);
-    _MTRR_setCx86((uchar)arr,     ((uchar*)&base)[3]);
-    _MTRR_setCx86((uchar)(arr+1), ((uchar*)&base)[2]);
-    _MTRR_setCx86((uchar)(arr+2), (uchar)((((uchar*)&base)[1]) | arr_size));
-    _MTRR_setCx86((uchar)(CX86_RCR_BASE + reg), (uchar)arr_type);
-    MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-On Cyrix 6x86(MX) and MII the ARR3 is special: it has connection
-with the SMM (System Management Mode) mode. So we need the following:
-Check whether SMI_LOCK (CCR3 bit 0) is set
-  if it is set, ARR3 cannot be changed  (it cannot be changed until the
-    next processor reset)
-  if it is reset, then we can change it, set all the needed bits:
-   - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
-   - disable access to SMM memory (CCR1 bit 2 reset)
-   - disable SMM mode (CCR1 bit 1 reset)
-   - disable write protection of ARR3 (CCR6 bit 1 reset)
-   - (maybe) disable ARR3
-Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
-****************************************************************************/
-static void CYRIX_initARR(void)
-{
-    MTRRContext c;
-    uchar       ccr[7];
-    int         ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
-
-    /* Begin updating */
-    MTRR_beginUpdate(&c);
-
-    /* Save all CCRs locally */
-    ccr[0] = _MTRR_getCx86(CX86_CCR0);
-    ccr[1] = _MTRR_getCx86(CX86_CCR1);
-    ccr[2] = _MTRR_getCx86(CX86_CCR2);
-    ccr[3] = (uchar)c.ccr3;
-    ccr[4] = _MTRR_getCx86(CX86_CCR4);
-    ccr[5] = _MTRR_getCx86(CX86_CCR5);
-    ccr[6] = _MTRR_getCx86(CX86_CCR6);
-    if (ccr[3] & 1)
-	ccrc[3] = 1;
-    else {
-	/* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
-	 * access to SMM memory through ARR3 (bit 7).
-	 */
-	if (ccr[6] & 0x02) {
-	    ccr[6] &= 0xFD;
-	    ccrc[6] = 1;        /* Disable write protection of ARR3. */
-	    _MTRR_setCx86(CX86_CCR6,ccr[6]);
-	    }
-	}
-
-    /* If we changed CCR1 in memory, change it in the processor, too. */
-    if (ccrc[1])
-	_MTRR_setCx86(CX86_CCR1,ccr[1]);
-
-    /* Enable ARR usage by the processor */
-    if (!(ccr[5] & 0x20)) {
-	ccr[5] |= 0x20;
-	ccrc[5] = 1;
-	_MTRR_setCx86(CX86_CCR5,ccr[5]);
-	}
-
-    /* We are finished updating */
-    MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the MTRR module, by detecting the processor type and determining
-if the processor supports the MTRR functionality.
-****************************************************************************/
-void MTRR_init(void)
-{
-    int     i,cpu,ltype;
-    ulong   eax,edx,lbase,lsize;
-
-    /* Check that we have a compatible CPU */
-    if (numMTRR == -1) {
-	numMTRR = 0;
-	if (!_MTRR_isRing0())
-	    return;
-	cpu = CPU_getProcessorType();
-	cpuFamily = cpu & CPU_familyMask;
-	cpuType = cpu & CPU_mask;
-	cpuStepping = (cpu & CPU_steppingMask) >> CPU_steppingShift;
-	switch (cpuFamily) {
-	    case CPU_Intel:
-		/* Intel Pentium Pro and later support the MTRR registers */
-		if (cpuType < CPU_PentiumPro)
-		    return;
-		_MTRR_readMSR(INTEL_cap_MSR,&eax,&edx);
-		numMTRR = eax & 0xFF;
-		getMTRR = INTEL_getMTRR;
-		setMTRR = INTEL_setMTRR;
-		getFreeRegion = GENERIC_getFreeRegion;
-		INTEL_disableBankedWriteCombine();
-		break;
-	    case CPU_AMD:
-		/* AMD K6-2 and later support the MTRR registers */
-		if ((cpuType < CPU_AMDK6_2) || (cpuType == CPU_AMDK6_2 && cpuStepping < 8))
-		    return;
-		if (cpuType < CPU_AMDAthlon) {
-		    numMTRR = 2;        /* AMD CPU's have 2 MTRR's */
-		    getMTRR = AMD_getMTRR;
-		    setMTRR = AMD_setMTRR;
-		    getFreeRegion = AMDK6_getFreeRegion;
-
-		    /* For some reason some IBM systems with K6-2 processors
-		     * have write combined enabled for the system BIOS
-		     * region from 0xE0000 to 0xFFFFFF. We need *both* MTRR's
-		     * for our own graphics drivers, so if we detect any
-		     * regions below the 1Meg boundary, we remove them
-		     * so we can use this MTRR register ourselves.
-		     */
-		    for (i = 0; i < numMTRR; i++) {
-			getMTRR(i,&lbase,&lsize,&ltype);
-			if (lbase < 0x100000)
-			    setMTRR(i,0,0,0);
-			}
-		    }
-		else {
-		    /* AMD Athlon uses P6 style MTRR's */
-		    _MTRR_readMSR(INTEL_cap_MSR,&eax,&edx);
-		    numMTRR = eax & 0xFF;
-		    getMTRR = INTEL_getMTRR;
-		    setMTRR = INTEL_setMTRR;
-		    getFreeRegion = GENERIC_getFreeRegion;
-		    INTEL_disableBankedWriteCombine();
-		    }
-		break;
-	    case CPU_Cyrix:
-		/* Cyrix 6x86 and later support the MTRR registers */
-		if (cpuType < CPU_Cyrix6x86 || cpuType >= CPU_CyrixMediaGX)
-		    return;
-		numMTRR = 8;        /* Cyrix CPU's have 8 ARR's */
-		getMTRR = CYRIX_getMTRR;
-		setMTRR = CYRIX_setMTRR;
-		getFreeRegion = CYRIX_getFreeRegion;
-		CYRIX_initARR();
-		break;
-	    default:
-		return;
-	    }
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int MTRR_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-    int     i;
-    int     ltype;
-    ulong   lbase,lsize,last;
-
-    /* Check that we have a CPU that supports MTRR's and type is valid */
-    if (numMTRR <= 0) {
-	if (!_MTRR_isRing0())
-	    return PM_MTRR_ERR_NO_OS_SUPPORT;
-	return PM_MTRR_NOT_SUPPORTED;
-	}
-    if (type >= PM_MTRR_MAX)
-	return PM_MTRR_ERR_PARAMS;
-
-    /* If the type is WC, check that this processor supports it */
-    if (!MTRR_haveWriteCombine())
-	return PM_MTRR_ERR_NOWRCOMB;
-
-    /* Adjust the boundaries depending on the CPU type */
-    switch (cpuFamily) {
-	case CPU_AMD:
-	    if (cpuType < CPU_AMDAthlon) {
-		/* Apply the K6 block alignment and size rules. In order:
-		 *  o Uncached or gathering only
-		 *  o 128K or bigger block
-		 *  o Power of 2 block
-		 *  o base suitably aligned to the power
-		 */
-		if (type > PM_MTRR_WRCOMB && (size < (1 << 17) || (size & ~(size-1))-size || (base & (size-1))))
-		    return PM_MTRR_ERR_NOT_ALIGNED;
-		break;
-		}
-	    /* Fall through for AMD Athlon which uses P6 style MTRR's */
-	case CPU_Intel:
-	case CPU_Cyrix:
-	    if ((base & 0xFFF) || (size & 0xFFF)) {
-		/* Base and size must be multiples of 4Kb */
-		return PM_MTRR_ERR_NOT_4KB_ALIGNED;
-		}
-	    if (base < 0x100000) {
-		/* Base must be >= 1Mb */
-		return PM_MTRR_ERR_BELOW_1MB;
-		}
-
-	    /* Check upper bits of base and last are equal and lower bits
-	     * are 0 for base and 1 for last
-	     */
-	    last = base + size - 1;
-	    for (lbase = base; !(lbase & 1) && (last & 1); lbase = lbase >> 1, last = last >> 1)
-		;
-	    if (lbase != last) {
-		/* Base is not aligned on the correct boundary */
-		return PM_MTRR_ERR_NOT_ALIGNED;
-		}
-	    break;
-	default:
-	    return PM_MTRR_NOT_SUPPORTED;
-	}
-
-    /* Search for existing MTRR */
-    for (i = 0; i < numMTRR; ++i) {
-	getMTRR(i,&lbase,&lsize,&ltype);
-	if (lbase == 0 && lsize == 0)
-	    continue;
-	if (base > lbase + (lsize-1))
-	    continue;
-	if ((base < lbase) && (base+size-1 < lbase))
-	    continue;
-
-	/* Check that we don't overlap an existing region */
-	if (type != PM_MTRR_UNCACHABLE) {
-	    if ((base < lbase) || (base+size-1 > lbase+lsize-1))
-		return PM_MTRR_ERR_OVERLAP;
-	    }
-	else if (base == lbase && size == lsize) {
-	    /* The region already exists so leave it alone */
-	    return PM_MTRR_ERR_OK;
-	    }
-
-	/* New region is enclosed by an existing region, so only allow
-	 * a new type to be created if we are setting a region to be
-	 * uncacheable (such as MMIO registers within a framebuffer).
-	 */
-	if (ltype != (int)type) {
-	    if (type == PM_MTRR_UNCACHABLE)
-		continue;
-	    return PM_MTRR_ERR_TYPE_MISMATCH;
-	    }
-	return PM_MTRR_ERR_OK;
-	}
-
-    /* Search for an empty MTRR */
-    if ((i = getFreeRegion(base,size)) < 0)
-	return PM_MTRR_ERR_NONE_FREE;
-    setMTRR(i,base,size,type);
-    return PM_MTRR_ERR_OK;
-}
-
-/****************************************************************************
-PARAMETERS:
-callback    - Function to callback with write combine information
-
-REMARKS:
-Function to enumerate all write combine regions currently enabled for the
-processor.
-****************************************************************************/
-int PMAPI PM_enumWriteCombine(
-    PM_enumWriteCombine_t callback)
-{
-    int     i,ltype;
-    ulong   lbase,lsize;
-
-    /* Check that we have a CPU that supports MTRR's and type is valid */
-    if (numMTRR <= 0) {
-	if (!_MTRR_isRing0())
-	    return PM_MTRR_ERR_NO_OS_SUPPORT;
-	return PM_MTRR_NOT_SUPPORTED;
-	}
-
-    /* Enumerate all existing MTRR's */
-    for (i = 0; i < numMTRR; ++i) {
-	getMTRR(i,&lbase,&lsize,&ltype);
-	callback(lbase,lsize,ltype);
-	}
-    return PM_MTRR_ERR_OK;
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c b/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c
deleted file mode 100644
index 1d542fc5df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c
+++ /dev/null
@@ -1,747 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module for interfacing to the PCI bus and configuration
-*               space registers.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
-#include <string.h>
-#endif
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/* Length of the memory mapping for the PCI BIOS */
-
-#define BIOS_LIMIT          (128 * 1024L - 1)
-
-/* Macros for accessing the PCI BIOS functions from 32-bit protected mode */
-
-#define BIOS32_SIGNATURE    (((ulong)'_' << 0) + ((ulong)'3' << 8) + ((ulong)'2' << 16) + ((ulong)'_' << 24))
-#define PCI_SIGNATURE       (((ulong)'P' << 0) + ((ulong)'C' << 8) + ((ulong)'I' << 16) + ((ulong)' ' << 24))
-#define PCI_SERVICE         (((ulong)'$' << 0) + ((ulong)'P' << 8) + ((ulong)'C' << 16) + ((ulong)'I' << 24))
-#define PCI_BIOS_PRESENT    0xB101
-#define FIND_PCI_DEVICE     0xB102
-#define FIND_PCI_CLASS      0xB103
-#define GENERATE_SPECIAL    0xB106
-#define READ_CONFIG_BYTE    0xB108
-#define READ_CONFIG_WORD    0xB109
-#define READ_CONFIG_DWORD   0xB10A
-#define WRITE_CONFIG_BYTE   0xB10B
-#define WRITE_CONFIG_WORD   0xB10C
-#define WRITE_CONFIG_DWORD  0xB10D
-#define GET_IRQ_ROUTING_OPT 0xB10E
-#define SET_PCI_IRQ         0xB10F
-
-/* This is the standard structure used to identify the entry point to the
- * BIOS32 Service Directory, as documented in PCI 2.1 BIOS Specicition.
- */
-
-typedef union {
-    struct {
-	ulong signature;        /* _32_                                 */
-	ulong entry;            /* 32 bit physical address              */
-	uchar revision;         /* Revision level, 0                    */
-	uchar length;           /* Length in paragraphs should be 01    */
-	uchar checksum;         /* All bytes must add up to zero        */
-	uchar reserved[5];      /* Must be zero                         */
-	} fields;
-    char chars[16];
-    } PCI_bios32;
-
-/* Structure for a far pointer to call the PCI BIOS services with */
-
-typedef struct {
-    ulong   address;
-    ushort  segment;
-    } PCIBIOS_entry;
-
-/* Macros to copy a structure that includes dwSize members */
-
-#define COPY_STRUCTURE(d,s) memcpy(d,s,MIN((s)->dwSize,(d)->dwSize))
-
-#pragma pack()
-
-/*--------------------------- Global variables ----------------------------*/
-
-static uchar            *BIOSImage = NULL;  /* BIOS image mapping       */
-static int              PCIBIOSVersion = -1;/* PCI BIOS version         */
-static PCIBIOS_entry    PCIEntry;           /* PCI services entry point */
-static ulong            PCIPhysEntry = 0;   /* Physical address         */
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler helper functions */
-
-uchar   _ASMAPI _BIOS32_service(ulong service,ulong function,ulong *physBase,ulong *length,ulong *serviceOffset,PCIBIOS_entry entry);
-ushort  _ASMAPI _PCIBIOS_isPresent(ulong i_eax,ulong *o_edx,ushort *o_ax,uchar *o_cl,PCIBIOS_entry entry);
-ulong   _ASMAPI _PCIBIOS_service(ulong r_eax,ulong r_ebx,ulong r_edi,ulong r_ecx,PCIBIOS_entry entry);
-int     _ASMAPI _PCIBIOS_getRouting(PCIRoutingOptionsBuffer *buf,PCIBIOS_entry entry);
-ibool   _ASMAPI _PCIBIOS_setIRQ(int busDev,int intPin,int IRQ,PCIBIOS_entry entry);
-ulong   _ASMAPI _PCIBIOS_specialCycle(int bus,ulong data,PCIBIOS_entry entry);
-ushort  _ASMAPI _PCI_getCS(void);
-
-/****************************************************************************
-REMARKS:
-This functions returns the physical address of the PCI BIOS entry point.
-****************************************************************************/
-ulong _ASMAPI PCIBIOS_getEntry(void)
-{ return PCIPhysEntry; }
-
-/****************************************************************************
-PARAMETERS:
-hwType  - Place to store the PCI hardware access mechanism flags
-lastBus - Place to store the index of the last PCI bus in the system
-
-RETURNS:
-Version number of the PCI BIOS found.
-
-REMARKS:
-This function determines if the PCI BIOS is present in the system, and if
-so returns the information returned by the PCI BIOS detect function.
-****************************************************************************/
-static int PCIBIOS_detect(
-    uchar *hwType,
-    uchar *lastBus)
-{
-    ulong   signature;
-    ushort  stat,version;
-
-#ifndef __16BIT__
-    PCIBIOS_entry   BIOSEntry = {0};
-    uchar           *BIOSEnd;
-    PCI_bios32      *BIOSDir;
-    ulong           physBase,length,offset;
-
-    /* Bail if we have already detected no BIOS is present */
-    if (PCIBIOSVersion == 0)
-	return 0;
-
-    /* First scan the memory from 0xE0000 to 0xFFFFF looking for the
-     * BIOS32 service directory, so we can determine if we can call it
-     * from 32-bit protected mode.
-     */
-    if (PCIBIOSVersion == -1) {
-	PCIBIOSVersion = 0;
-	BIOSImage = PM_mapPhysicalAddr(0xE0000,BIOS_LIMIT,false);
-	if (!BIOSImage)
-	    return 0;
-	BIOSEnd = BIOSImage + 0x20000;
-	for (BIOSDir = (PCI_bios32*)BIOSImage; BIOSDir < (PCI_bios32*)BIOSEnd; BIOSDir++) {
-	    uchar   sum;
-	    int     i,length;
-
-	    if (BIOSDir->fields.signature != BIOS32_SIGNATURE)
-		continue;
-	    length = BIOSDir->fields.length * 16;
-	    if (!length)
-		continue;
-	    for (sum = i = 0; i < length ; i++)
-		sum += BIOSDir->chars[i];
-	    if (sum != 0)
-		continue;
-	    BIOSEntry.address = (ulong)BIOSImage + (BIOSDir->fields.entry - 0xE0000);
-	    BIOSEntry.segment = _PCI_getCS();
-	    break;
-	    }
-
-	/* If we found the BIOS32 directory, call it to get the address of the
-	 * PCI services.
-	 */
-	if (BIOSEntry.address == 0)
-	    return 0;
-	if (_BIOS32_service(PCI_SERVICE,0,&physBase,&length,&offset,BIOSEntry) != 0)
-	    return 0;
-	PCIPhysEntry = physBase + offset;
-	PCIEntry.address = (ulong)BIOSImage + (PCIPhysEntry - 0xE0000);
-	PCIEntry.segment = _PCI_getCS();
-	}
-#endif
-    /* We found the BIOS entry, so now do the version check */
-    version = _PCIBIOS_isPresent(PCI_BIOS_PRESENT,&signature,&stat,lastBus,PCIEntry);
-    if (version > 0 && ((stat >> 8) == 0) && signature == PCI_SIGNATURE) {
-	*hwType = stat & 0xFF;
-	return PCIBIOSVersion = version;
-	}
-    return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-info    - Array of PCIDeviceInfo structures to check against
-index   - Index of the current device to check
-
-RETURNS:
-True if the device is a duplicate, false if not.
-
-REMARKS:
-This function goes through the list of all devices preceeding the newly
-found device in the info structure, and checks that the device is not a
-duplicate of a previous device. Some devices incorrectly enumerate
-themselves at different function addresses so we check here to exclude
-those cases.
-****************************************************************************/
-static ibool CheckDuplicate(
-    PCIDeviceInfo *info,
-    PCIDeviceInfo *prev)
-{
-    /* Ignore devices with a vendor ID of 0 */
-    if (info->VendorID == 0)
-	return true;
-
-    /* NOTE: We only check against the current device on
-     *       the bus to ensure that we do not exclude
-     *       multiple controllers of the same device ID.
-     */
-    if (info->slot.p.Bus == prev->slot.p.Bus &&
-	info->slot.p.Device == prev->slot.p.Device &&
-	info->DeviceID == prev->DeviceID)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Array of PCIDeviceInfo structures to fill in
-maxDevices  - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateMech1(
-    PCIDeviceInfo info[])
-{
-    int             bus,device,function,i,numFound = 0;
-    ulong           *lp,tmp;
-    PCIslot         slot = {{0,0,0,0,0,0,1}};
-    PCIDeviceInfo   pci,prev = {0};
-
-    /* Try PCI access mechanism 1 */
-    PM_outpb(0xCFB,0x01);
-    tmp = PM_inpd(0xCF8);
-    PM_outpd(0xCF8,slot.i);
-    if ((PM_inpd(0xCF8) == slot.i) && (PM_inpd(0xCFC) != 0xFFFFFFFFUL)) {
-	/* PCI access mechanism 1 - the preferred mechanism */
-	for (bus = 0; bus < 8; bus++) {
-	    slot.p.Bus = bus;
-	    for (device = 0; device < 32; device++) {
-		slot.p.Device = device;
-		for (function = 0; function < 8; function++) {
-		    slot.p.Function = function;
-		    slot.p.Register = 0;
-		    PM_outpd(0xCF8,slot.i);
-		    if (PM_inpd(0xCFC) != 0xFFFFFFFFUL) {
-			memset(&pci,0,sizeof(pci));
-			pci.dwSize = sizeof(pci);
-			pci.mech1 = 1;
-			pci.slot = slot;
-			lp = (ulong*)&(pci.VendorID);
-			for (i = 0; i < NUM_PCI_REG; i++, lp++) {
-			    slot.p.Register = i;
-			    PM_outpd(0xCF8,slot.i);
-			    *lp = PM_inpd(0xCFC);
-			    }
-			if (!CheckDuplicate(&pci,&prev)) {
-			    if (info)
-				COPY_STRUCTURE(&info[numFound],&pci);
-			    ++numFound;
-			    }
-			prev = pci;
-			}
-		    }
-		}
-	    }
-
-	/* Disable PCI config cycle on exit */
-	PM_outpd(0xCF8,0);
-	return numFound;
-	}
-    PM_outpd(0xCF8,tmp);
-
-    /* No hardware access mechanism 1 found */
-    return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Array of PCIDeviceInfo structures to fill in
-maxDevices  - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateMech2(
-    PCIDeviceInfo info[])
-{
-    int             bus,device,function,i,numFound = 0;
-    ushort          deviceIO;
-    ulong           *lp;
-    PCIslot         slot = {{0,0,0,0,0,0,1}};
-    PCIDeviceInfo   pci,prev = {0};
-
-    /* Try PCI access mechanism 2 */
-    PM_outpb(0xCFB,0x00);
-    PM_outpb(0xCF8,0x00);
-    PM_outpb(0xCFA,0x00);
-    if (PM_inpb(0xCF8) == 0x00 && PM_inpb(0xCFB) == 0x00) {
-	/* PCI access mechanism 2 - the older mechanism for legacy busses */
-	for (bus = 0; bus < 2; bus++) {
-	    slot.p.Bus = bus;
-	    PM_outpb(0xCFA,(uchar)bus);
-	    for (device = 0; device < 16; device++) {
-		slot.p.Device = device;
-		deviceIO = 0xC000 + (device << 8);
-		for (function = 0; function < 8; function++) {
-		    slot.p.Function = function;
-		    slot.p.Register = 0;
-		    PM_outpb(0xCF8,(uchar)((function << 1) | 0x10));
-		    if (PM_inpd(deviceIO) != 0xFFFFFFFFUL) {
-			memset(&pci,0,sizeof(pci));
-			pci.dwSize = sizeof(pci);
-			pci.mech1 = 0;
-			pci.slot = slot;
-			lp = (ulong*)&(pci.VendorID);
-			for (i = 0; i < NUM_PCI_REG; i++, lp++) {
-			    slot.p.Register = i;
-			    *lp = PM_inpd(deviceIO + (i << 2));
-			    }
-			if (!CheckDuplicate(&pci,&prev)) {
-			    if (info)
-				COPY_STRUCTURE(&info[numFound],&pci);
-			    ++numFound;
-			    }
-			prev = pci;
-			}
-		    }
-		}
-	    }
-
-	/* Disable PCI config cycle on exit */
-	PM_outpb(0xCF8,0);
-	return numFound;
-	}
-
-    /* No hardware access mechanism 2 found */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This functions reads a configuration dword via the PCI BIOS.
-****************************************************************************/
-static ulong PCIBIOS_readDWORD(
-    int index,
-    ulong slot)
-{
-    return (ulong)_PCIBIOS_service(READ_CONFIG_DWORD,slot >> 8,index,0,PCIEntry);
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Array of PCIDeviceInfo structures to fill in
-maxDevices  - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateBIOS(
-    PCIDeviceInfo info[])
-{
-    uchar           hwType,lastBus;
-    int             bus,device,function,i,numFound = 0;
-    ulong           *lp;
-    PCIslot         slot = {{0,0,0,0,0,0,1}};
-    PCIDeviceInfo   pci,prev = {0};
-
-    if (PCIBIOS_detect(&hwType,&lastBus)) {
-	/* PCI BIOS access - the ultimate fallback */
-	for (bus = 0; bus <= lastBus; bus++) {
-	    slot.p.Bus = bus;
-	    for (device = 0; device < 32; device++) {
-		slot.p.Device = device;
-		for (function = 0; function < 8; function++) {
-		    slot.p.Function = function;
-		    if (PCIBIOS_readDWORD(0,slot.i) != 0xFFFFFFFFUL) {
-			memset(&pci,0,sizeof(pci));
-			pci.dwSize = sizeof(pci);
-			pci.mech1 = 2;
-			pci.slot = slot;
-			lp = (ulong*)&(pci.VendorID);
-			for (i = 0; i < NUM_PCI_REG; i++, lp++)
-			    *lp = PCIBIOS_readDWORD(i << 2,slot.i);
-			if (!CheckDuplicate(&pci,&prev)) {
-			    if (info)
-				COPY_STRUCTURE(&info[numFound],&pci);
-			    ++numFound;
-			    }
-			prev = pci;
-			}
-		    }
-		}
-	    }
-	}
-
-    /* Return number of devices found */
-    return numFound;
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Array of PCIDeviceInfo structures to fill in
-maxDevices  - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-int _ASMAPI PCI_enumerate(
-    PCIDeviceInfo info[])
-{
-    int numFound;
-
-    /* First try via the direct access mechanisms which are faster if we
-     * have them (nearly always). The BIOS is used as a fallback, and for
-     * stuff we can't do directly.
-     */
-    if ((numFound = PCI_enumerateMech1(info)) == 0) {
-	if ((numFound = PCI_enumerateMech2(info)) == 0) {
-	    if ((numFound = PCI_enumerateBIOS(info)) == 0)
-		return 0;
-	    }
-	}
-    return numFound;
-}
-
-/****************************************************************************
-PARAMETERS:
-info        - Array of PCIDeviceInfo structures to fill in
-maxDevices  - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-int _ASMAPI PCI_getNumDevices(void)
-{
-    return PCI_enumerate(NULL);
-}
-
-/****************************************************************************
-PARAMETERS:
-bar - Base address to measure
-pci - PCI device to access
-
-RETURNS:
-Size of the PCI base address in bytes
-
-REMARKS:
-This function measures the size of the PCI base address register in bytes,
-by writing all F's to the register, and reading the value back. The size
-of the base address is determines by the bits that are hardwired to zero's.
-****************************************************************************/
-ulong _ASMAPI PCI_findBARSize(
-    int bar,
-    PCIDeviceInfo *pci)
-{
-    ulong   base,size = 0;
-
-    base = PCI_accessReg(bar,0,PCI_READ_DWORD,pci);
-    if (base && !(base & 0x1)) {
-	/* For some strange reason some devices don't properly decode
-	 * their base address registers (Intel PCI/PCI bridges!), and
-	 * we read completely bogus values. We check for that here
-	 * and clear out those BAR's.
-	 *
-	 * We check for that here because at least the low 12 bits
-	 * of the address range must be zeros, since the page size
-	 * on IA32 processors is always 4Kb.
-	 */
-	if ((base & 0xFFF) == 0) {
-	    PCI_accessReg(bar,0xFFFFFFFF,PCI_WRITE_DWORD,pci);
-	    size = PCI_accessReg(bar,0,PCI_READ_DWORD,pci) & ~0xFF;
-	    size = ~size+1;
-	    PCI_accessReg(bar,base,PCI_WRITE_DWORD,pci);
-	    }
-	}
-    pci->slot.p.Register = 0;
-    return size;
-}
-
-/****************************************************************************
-PARAMETERS:
-index   - DWORD index of the register to access
-value   - Value to write to the register for write access
-func    - Function to implement
-
-RETURNS:
-The value read from the register for read operations
-
-REMARKS:
-The function code are defined as follows
-
-code    - function
-0       - Read BYTE
-1       - Read WORD
-2       - Read DWORD
-3       - Write BYTE
-4       - Write WORD
-5       - Write DWORD
-****************************************************************************/
-ulong _ASMAPI PCI_accessReg(
-    int index,
-    ulong value,
-    int func,
-    PCIDeviceInfo *info)
-{
-    int iobase;
-
-    if (info->mech1 == 2) {
-	/* Use PCI BIOS access since we dont have direct hardware access */
-	switch (func) {
-	    case PCI_READ_BYTE:
-		return (uchar)_PCIBIOS_service(READ_CONFIG_BYTE,info->slot.i >> 8,index,0,PCIEntry);
-	    case PCI_READ_WORD:
-		return (ushort)_PCIBIOS_service(READ_CONFIG_WORD,info->slot.i >> 8,index,0,PCIEntry);
-	    case PCI_READ_DWORD:
-		return (ulong)_PCIBIOS_service(READ_CONFIG_DWORD,info->slot.i >> 8,index,0,PCIEntry);
-	    case PCI_WRITE_BYTE:
-		_PCIBIOS_service(WRITE_CONFIG_BYTE,info->slot.i >> 8,index,value,PCIEntry);
-		break;
-	    case PCI_WRITE_WORD:
-		_PCIBIOS_service(WRITE_CONFIG_WORD,info->slot.i >> 8,index,value,PCIEntry);
-		break;
-	    case PCI_WRITE_DWORD:
-		_PCIBIOS_service(WRITE_CONFIG_DWORD,info->slot.i >> 8,index,value,PCIEntry);
-		break;
-	    }
-	}
-    else {
-	/* Use direct hardware access mechanisms */
-	if (info->mech1) {
-	    /* PCI access mechanism 1 */
-	    iobase = 0xCFC + (index & 3);
-	    info->slot.p.Register = index >> 2;
-	    PM_outpd(0xCF8,info->slot.i);
-	    }
-	else {
-	    /* PCI access mechanism 2 */
-	    PM_outpb(0xCF8,(uchar)((info->slot.p.Function << 1) | 0x10));
-	    PM_outpb(0xCFA,(uchar)info->slot.p.Bus);
-	    iobase = 0xC000 + (info->slot.p.Device << 8) + index;
-	    }
-	switch (func) {
-	    case PCI_READ_BYTE:
-	    case PCI_READ_WORD:
-	    case PCI_READ_DWORD:    value = PM_inpd(iobase);        break;
-	    case PCI_WRITE_BYTE:    PM_outpb(iobase,(uchar)value);  break;
-	    case PCI_WRITE_WORD:    PM_outpw(iobase,(ushort)value); break;
-	    case PCI_WRITE_DWORD:   PM_outpd(iobase,(ulong)value);  break;
-	    }
-	PM_outpd(0xCF8,0);
-	}
-    return value;
-}
-
-/****************************************************************************
-PARAMETERS:
-numDevices  - Number of devices to query info for
-
-RETURNS:
-0 on success, -1 on error, number of devices to enumerate if numDevices = 0
-
-REMARKS:
-This function reads the PCI routing information. If you pass a value of
-0 for numDevices, this function will return with the number of devices
-needed in the routing buffer that will be filled in by the BIOS.
-****************************************************************************/
-ibool _ASMAPI PCI_getIRQRoutingOptions(
-    int numDevices,
-    PCIRouteInfo *buffer)
-{
-    PCIRoutingOptionsBuffer buf;
-    int                     ret;
-
-    if (PCIPhysEntry) {
-	buf.BufferSize = numDevices * sizeof(PCIRouteInfo);
-	buf.DataBuffer = buffer;
-	if ((ret = _PCIBIOS_getRouting(&buf,PCIEntry)) == 0x89)
-	    return buf.BufferSize / sizeof(PCIRouteInfo);
-	if (ret != 0)
-	    return -1;
-	return 0;
-	}
-
-    /* We currently only support this via the PCI BIOS functions */
-    return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-info    - PCI device information for the specified device
-intPin  - Value to store in the PCI InterruptPin register
-IRQ     - New ISA IRQ to map the PCI interrupt to (0-15)
-
-RETURNS:
-True on success, or false if this function failed.
-
-REMARKS:
-This function changes the PCI IRQ routing for the specified device to the
-desired PCI interrupt and the desired ISA bus compatible IRQ. This function
-may not be supported by the PCI BIOS, in which case this function will
-fail.
-****************************************************************************/
-ibool _ASMAPI PCI_setHardwareIRQ(
-    PCIDeviceInfo *info,
-    uint intPin,
-    uint IRQ)
-{
-    if (PCIPhysEntry) {
-	if (_PCIBIOS_setIRQ(info->slot.i >> 8,intPin,IRQ,PCIEntry)) {
-	    info->u.type0.InterruptPin = intPin;
-	    info->u.type0.InterruptLine = IRQ;
-	    return true;
-	    }
-	return false;
-	}
-
-    /* We currently only support this via the PCI BIOS functions */
-    return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-bus                 - Bus number to generate the special cycle for
-specialCycleData    - Data to send for the special cyle
-
-REMARKS:
-This function generates a special cycle on the specified bus using with
-the specified data.
-****************************************************************************/
-void _ASMAPI PCI_generateSpecialCyle(
-    uint bus,
-    ulong specialCycleData)
-{
-    if (PCIPhysEntry)
-	_PCIBIOS_specialCycle(bus,specialCycleData,PCIEntry);
-    /* We currently only support this via the PCI BIOS functions */
-}
-
-/****************************************************************************
-PARAMETERS:
-info    - PCI device information block for device to access
-index   - Index of register to start reading from
-dst     - Place to store the values read from configuration space
-count   - Count of bytes to read from configuration space
-
-REMARKS:
-This function is used to read a block of PCI configuration space registers
-from the configuration space into the passed in data block. This function
-will properly handle reading non-DWORD aligned data from the configuration
-space correctly.
-****************************************************************************/
-void _ASMAPI PCI_readRegBlock(
-    PCIDeviceInfo *info,
-    int index,
-    void *dst,
-    int count)
-{
-    uchar   *pb;
-    ulong   *pd;
-    int     i;
-    int     startCount = (index & 3);
-    int     middleCount = (count - startCount) >> 2;
-    int     endCount = count - middleCount * 4 - startCount;
-
-    for (i = 0,pb = dst; i < startCount; i++, index++) {
-	*pb++ = (uchar)PCI_accessReg(index,0,PCI_READ_BYTE,info);
-	}
-    for (i = 0,pd = (ulong*)pb; i < middleCount; i++, index += 4) {
-	*pd++ = (ulong)PCI_accessReg(index,0,PCI_READ_DWORD,info);
-	}
-    for (i = 0,pb = (uchar*)pd; i < endCount; i++, index++) {
-	*pb++ = (uchar)PCI_accessReg(index,0,PCI_READ_BYTE,info);
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-info    - PCI device information block for device to access
-index   - Index of register to start reading from
-dst     - Place to store the values read from configuration space
-count   - Count of bytes to read from configuration space
-
-REMARKS:
-This function is used to write a block of PCI configuration space registers
-to the configuration space from the passed in data block. This function
-will properly handle writing non-DWORD aligned data to the configuration
-space correctly.
-****************************************************************************/
-void _ASMAPI PCI_writeRegBlock(
-    PCIDeviceInfo *info,
-    int index,
-    void *src,
-    int count)
-{
-    uchar   *pb;
-    ulong   *pd;
-    int     i;
-    int     startCount = (index & 3);
-    int     middleCount = (count - startCount) >> 2;
-    int     endCount = count - middleCount * 4 - startCount;
-
-    for (i = 0,pb = src; i < startCount; i++, index++) {
-	PCI_accessReg(index,*pb++,PCI_WRITE_BYTE,info);
-	}
-    for (i = 0,pd = (ulong*)pb; i < middleCount; i++, index += 4) {
-	PCI_accessReg(index,*pd++,PCI_WRITE_DWORD,info);
-	}
-    for (i = 0,pb = (uchar*)pd; i < endCount; i++, index++) {
-	PCI_accessReg(index,*pb++,PCI_WRITE_BYTE,info);
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c b/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c
deleted file mode 100644
index c3a66a7c14..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module containing Unix I/O functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <dirent.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* {secret} */
-typedef struct {
-    DIR     *d;
-    char    path[PM_MAX_PATH];
-    char    mask[PM_MAX_PATH];
-    } PM_findHandle;
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
-    PM_findData *findData,
-    struct dirent *blk,
-    const char *path)
-{
-    ulong       dwSize = findData->dwSize;
-    struct stat st;
-    char        filename[PM_MAX_PATH];
-
-    memset(findData,0,findData->dwSize);
-    findData->dwSize = dwSize;
-    strcpy(filename,path);
-    PM_backslash(filename);
-    strcat(filename,blk->d_name);
-    stat(filename,&st);
-    if (!(st.st_mode & S_IWRITE))
-	findData->attrib |= PM_FILE_READONLY;
-    if (st.st_mode & S_IFDIR)
-	findData->attrib |= PM_FILE_DIRECTORY;
-    findData->sizeLo = st.st_size;
-    findData->sizeHi = 0;
-    strncpy(findData->name,blk->d_name,PM_MAX_PATH);
-    findData->name[PM_MAX_PATH-1] = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Determines if a file name matches the passed in pattern.
-****************************************************************************/
-static ibool filematch(
-    char *pattern,
-    char *dirpath,
-    struct dirent *dire)
-{
-    struct stat st;
-    int         i = 0,j = 0,lastchar = '\0';
-    char        fullpath[PM_MAX_PATH];
-
-    strcpy(fullpath,dirpath);
-    PM_backslash(fullpath);
-    strcat(fullpath, dire->d_name);
-    if (stat(fullpath, &st) != 0)
-	return false;
-    for (; i < (int)strlen(dire->d_name) && j < (int)strlen(pattern); i++, j++) {
-	if (pattern[j] == '*' && lastchar != '\\') {
-	    if (pattern[j+1] == '\0')
-		return true;
-	    while (dire->d_name[i++] != pattern[j+1]) {
-		if (dire->d_name[i] == '\0')
-		    return false;
-		}
-	    i -= 2;
-	    }
-	else if (dire->d_name[i] != pattern[j] &&
-		!(pattern[j] == '?' && lastchar != '\\'))
-	    return false;
-	lastchar = pattern[i];
-	}
-    if (j == (int)strlen(pattern) && i == (int)strlen(dire->d_name))
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    PM_findHandle   *d;
-    struct dirent   *dire;
-    char            name[PM_MAX_PATH];
-    char            ext[PM_MAX_PATH];
-
-    if ((d = PM_malloc(sizeof(*d))) == NULL)
-	return PM_FILE_INVALID;
-    PM_splitpath(filename,NULL,d->path,name,ext);
-    strcpy(d->mask,name);
-    strcat(d->mask,ext);
-    if (strlen(d->path) == 0)
-	strcpy(d->path, ".");
-    if (d->path[strlen(d->path)-1] == '/')
-	d->path[strlen(d->path)-1] = 0;
-    if ((d->d = opendir(d->path)) != NULL) {
-	while ((dire = readdir(d->d)) != NULL) {
-	    if (filematch(d->mask,d->path,dire)) {
-		convertFindData(findData,dire,d->path);
-		return d;
-		}
-	    }
-	closedir(d->d);
-	}
-    PM_free(d);
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    PM_findHandle   *d = handle;
-    struct dirent   *dire;
-
-    while ((dire = readdir(d->d)) != NULL) {
-	if (filematch(d->mask,d->path,dire)) {
-	    convertFindData(findData,dire,d->path);
-	    return true;
-	    }
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    PM_findHandle   *d = handle;
-
-    closedir(d->d);
-    free(d);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    if (drive == 3)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    (void)drive;
-    getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    struct stat st;
-    mode_t      mode;
-
-    stat(filename,&st);
-    mode = st.st_mode;
-    if (attrib & PM_FILE_READONLY)
-	mode &= ~S_IWRITE;
-    else
-	mode |= S_IWRITE;
-    chmod(filename,mode);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    struct stat st;
-
-    stat(filename,&st);
-    if (st.st_mode & S_IWRITE)
-	return 0;
-    return PM_FILE_READONLY;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    return mkdir(filename,0x1FF) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return rmdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_getFileTime not implemented yet!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_setFileTime not implemented yet!");
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c b/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c
deleted file mode 100644
index 8056e9a33f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*                   Portions copyright (C) Josh Vanderhoof
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Functions to save and restore the VGA hardware state.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <string.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* VGA index register ports */
-#define CRT_I   0x3D4       /* CRT Controller Index                     */
-#define ATT_IW  0x3C0       /* Attribute Controller Index & Data        */
-#define GRA_I   0x3CE       /* Graphics Controller Index                */
-#define SEQ_I   0x3C4       /* Sequencer Index                          */
-
-/* VGA data register ports */
-#define CRT_D   0x3D5       /* CRT Controller Data Register             */
-#define ATT_R   0x3C1       /* Attribute Controller Data Read Register  */
-#define GRA_D   0x3CF       /* Graphics Controller Data Register        */
-#define SEQ_D   0x3C5       /* Sequencer Data Register                  */
-#define MIS_R   0x3CC       /* Misc Output Read Register                */
-#define MIS_W   0x3C2       /* Misc Output Write Register               */
-#define IS1_R   0x3DA       /* Input Status Register 1                  */
-#define PEL_IW  0x3C8       /* PEL Write Index                          */
-#define PEL_IR  0x3C7       /* PEL Read Index                           */
-#define PEL_D   0x3C9       /* PEL Data Register                        */
-
-/* standard VGA indexes max counts */
-#define CRT_C   24          /* 24  CRT Controller Registers             */
-#define ATT_C   21          /* 21  Attribute Controller Registers       */
-#define GRA_C   9           /* 9   Graphics Controller Registers        */
-#define SEQ_C   5           /* 5   Sequencer Registers                  */
-#define MIS_C   1           /* 1   Misc Output Register                 */
-#define PAL_C   768         /* 768 Palette Registers                    */
-#define FONT_C  8192        /* Total size of character generator RAM    */
-
-/* VGA registers saving indexes */
-#define CRT     0           /* CRT Controller Registers start           */
-#define ATT     (CRT+CRT_C) /* Attribute Controller Registers start     */
-#define GRA     (ATT+ATT_C) /* Graphics Controller Registers start      */
-#define SEQ     (GRA+GRA_C) /* Sequencer Registers                      */
-#define MIS     (SEQ+SEQ_C) /* General Registers                        */
-#define PAL     (MIS+MIS_C) /* VGA Palette Registers                    */
-#define FONT    (PAL+PAL_C) /* VGA font data                            */
-
-/* Macros for port I/O with arguments reversed */
-
-#define _port_out(v,p)  PM_outpb(p,(uchar)(v))
-#define _port_in(p)     PM_inpb(p)
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Returns the size of the VGA state buffer.
-****************************************************************************/
-int PMAPI PM_getVGAStateSize(void)
-{
-    return CRT_C + ATT_C + GRA_C + SEQ_C + MIS_C + PAL_C + FONT_C;
-}
-
-/****************************************************************************
-REMARKS:
-Delay for a short period of time.
-****************************************************************************/
-static void vga_delay(void)
-{
-    int i;
-
-    /* For the loop here we program the POST register. The length of this
-     * delay is dependant only on ISA bus speed, but it is enough for
-     * what we need.
-     */
-    for (i = 0; i <= 10; i++)
-	PM_outpb(0x80, 0);
-}
-
-/****************************************************************************
-PARAMETERS:
-port    - I/O port to read value from
-index   - Port index to read
-
-RETURNS:
-Byte read from 'port' register 'index'.
-****************************************************************************/
-static ushort vga_rdinx(
-    ushort port,
-    ushort index)
-{
-    PM_outpb(port,(uchar)index);
-    return PM_inpb(port+1);
-}
-
-/****************************************************************************
-PARAMETERS:
-port    - I/O port to write to
-index   - Port index to write
-value   - Byte to write to port
-
-REMARKS:
-Writes a byte value to the 'port' register 'index'.
-****************************************************************************/
-static void vga_wrinx(
-    ushort port,
-    ushort index,
-    ushort value)
-{
-    PM_outpb(port,(uchar)index);
-    PM_outpb(port+1,(uchar)value);
-}
-
-/****************************************************************************
-REMARKS:
-Save the color palette values
-****************************************************************************/
-static void vga_savepalette(
-    uchar *pal)
-{
-    int i;
-
-    _port_out(0, PEL_IR);
-    for (i = 0; i < 768; i++) {
-	vga_delay();
-	*pal++ = _port_in(PEL_D);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Restore the color palette values
-****************************************************************************/
-static void vga_restorepalette(
-    const uchar *pal)
-{
-    int i;
-
-    /* restore saved palette */
-    _port_out(0, PEL_IW);
-    for (i = 0; i < 768; i++) {
-	vga_delay();
-	_port_out(*pal++, PEL_D);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Read the font data from the VGA character generator RAM
-****************************************************************************/
-static void vga_saveFont(
-    uchar *data)
-{
-    uchar   *A0000Ptr = PM_getA0000Pointer();
-    uchar   save[7];
-
-    /* Enable access to character generator RAM */
-    save[0] = (uchar)vga_rdinx(SEQ_I,0x00);
-    save[1] = (uchar)vga_rdinx(SEQ_I,0x02);
-    save[2] = (uchar)vga_rdinx(SEQ_I,0x04);
-    save[3] = (uchar)vga_rdinx(SEQ_I,0x00);
-    save[4] = (uchar)vga_rdinx(GRA_I,0x04);
-    save[5] = (uchar)vga_rdinx(GRA_I,0x05);
-    save[6] = (uchar)vga_rdinx(GRA_I,0x06);
-    vga_wrinx(SEQ_I,0x00,0x01);
-    vga_wrinx(SEQ_I,0x02,0x04);
-    vga_wrinx(SEQ_I,0x04,0x07);
-    vga_wrinx(SEQ_I,0x00,0x03);
-    vga_wrinx(GRA_I,0x04,0x02);
-    vga_wrinx(GRA_I,0x05,0x00);
-    vga_wrinx(GRA_I,0x06,0x00);
-
-    /* Copy character generator RAM */
-    memcpy(data,A0000Ptr,FONT_C);
-
-    /* Restore VGA state */
-    vga_wrinx(SEQ_I,0x00,save[0]);
-    vga_wrinx(SEQ_I,0x02,save[1]);
-    vga_wrinx(SEQ_I,0x04,save[2]);
-    vga_wrinx(SEQ_I,0x00,save[3]);
-    vga_wrinx(GRA_I,0x04,save[4]);
-    vga_wrinx(GRA_I,0x05,save[5]);
-    vga_wrinx(GRA_I,0x06,save[6]);
-}
-
-/****************************************************************************
-REMARKS:
-Downloads the font data to the VGA character generator RAM
-****************************************************************************/
-static void vga_restoreFont(
-    const uchar *data)
-{
-    uchar   *A0000Ptr = PM_getA0000Pointer();
-
-    /* Enable access to character generator RAM */
-    vga_wrinx(SEQ_I,0x00,0x01);
-    vga_wrinx(SEQ_I,0x02,0x04);
-    vga_wrinx(SEQ_I,0x04,0x07);
-    vga_wrinx(SEQ_I,0x00,0x03);
-    vga_wrinx(GRA_I,0x04,0x02);
-    vga_wrinx(GRA_I,0x05,0x00);
-    vga_wrinx(GRA_I,0x06,0x00);
-
-    /* Copy font back to character generator RAM */
-    memcpy(A0000Ptr,data,FONT_C);
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of all VGA compatible registers
-****************************************************************************/
-void PMAPI PM_saveVGAState(
-    void *stateBuf)
-{
-    uchar   *regs = stateBuf;
-    int     i;
-
-    /* Save state of VGA registers */
-    for (i = 0; i < CRT_C; i++) {
-	_port_out(i, CRT_I);
-	regs[CRT + i] = _port_in(CRT_D);
-	}
-    for (i = 0; i < ATT_C; i++) {
-	_port_in(IS1_R);
-	vga_delay();
-	_port_out(i, ATT_IW);
-	vga_delay();
-	regs[ATT + i] = _port_in(ATT_R);
-	vga_delay();
-	}
-    for (i = 0; i < GRA_C; i++) {
-	_port_out(i, GRA_I);
-	regs[GRA + i] = _port_in(GRA_D);
-	}
-    for (i = 0; i < SEQ_C; i++) {
-	_port_out(i, SEQ_I);
-	regs[SEQ + i] = _port_in(SEQ_D);
-	}
-    regs[MIS] = _port_in(MIS_R);
-
-    /* Save the VGA palette values */
-    vga_savepalette(&regs[PAL]);
-
-    /* Save the VGA character generator RAM */
-    vga_saveFont(&regs[FONT]);
-
-    /* Turn the VGA display back on */
-    PM_vgaUnblankDisplay();
-}
-
-/****************************************************************************
-REMARKS:
-Retore the state of all VGA compatible registers
-****************************************************************************/
-void PMAPI PM_restoreVGAState(
-    const void *stateBuf)
-{
-    const uchar *regs = stateBuf;
-    int         i;
-
-    /* Blank the display before we start the restore */
-    PM_vgaBlankDisplay();
-
-    /* Restore the VGA character generator RAM */
-    vga_restoreFont(&regs[FONT]);
-
-    /* Restore the VGA palette values */
-    vga_restorepalette(&regs[PAL]);
-
-    /* Restore the state of the VGA compatible registers */
-    _port_out(regs[MIS], MIS_W);
-
-    /* Delay to allow clock change to settle */
-    for (i = 0; i < 10; i++)
-	vga_delay();
-
-    /* Synchronous reset on */
-    _port_out(0x00,SEQ_I);
-    _port_out(0x01,SEQ_D);
-
-    /* Write seqeuencer registers */
-    _port_out(1, SEQ_I);
-    _port_out(regs[SEQ + 1] | 0x20, SEQ_D);
-    for (i = 2; i < SEQ_C; i++) {
-	_port_out(i, SEQ_I);
-	_port_out(regs[SEQ + i], SEQ_D);
-	}
-
-    /* Synchronous reset off */
-    _port_out(0x00,SEQ_I);
-    _port_out(0x03,SEQ_D);
-
-    /* Deprotect CRT registers 0-7 and write CRTC */
-    _port_out(0x11, CRT_I);
-    _port_out(_port_in(CRT_D) & 0x7F, CRT_D);
-    for (i = 0; i < CRT_C; i++) {
-	_port_out(i, CRT_I);
-	_port_out(regs[CRT + i], CRT_D);
-	}
-    for (i = 0; i < GRA_C; i++) {
-	_port_out(i, GRA_I);
-	_port_out(regs[GRA + i], GRA_D);
-	}
-    for (i = 0; i < ATT_C; i++) {
-	_port_in(IS1_R);        /* reset flip-flop */
-	vga_delay();
-	_port_out(i, ATT_IW);
-	vga_delay();
-	_port_out(regs[ATT + i], ATT_IW);
-	vga_delay();
-	}
-
-    /* Ensure the VGA screen is turned on */
-    PM_vgaUnblankDisplay();
-}
-
-/****************************************************************************
-REMARKS:
-Disables the VGA display for screen output making it blank.
-****************************************************************************/
-void PMAPI PM_vgaBlankDisplay(void)
-{
-    /* Turn screen off */
-    _port_out(0x01, SEQ_I);
-    _port_out(_port_in(SEQ_D) | 0x20, SEQ_D);
-
-    /* Disable video output */
-    _port_in(IS1_R);
-    vga_delay();
-     _port_out(0x00, ATT_IW);
-}
-
-/****************************************************************************
-REMARKS:
-Enables the VGA display for screen output.
-****************************************************************************/
-void PMAPI PM_vgaUnblankDisplay(void)
-{
-    /* Turn screen back on */
-    _port_out(0x01, SEQ_I);
-    _port_out(_port_in(SEQ_D) & 0xDF, SEQ_D);
-
-    /* Enable video output */
-    _port_in(IS1_R);
-    vga_delay();
-    _port_out(0x20, ATT_IW);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c
deleted file mode 100644
index ac62e81c10..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c
+++ /dev/null
@@ -1,808 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Main module to implement the Zen Timer support functions.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include "oshdr.h"
-#if !defined(__WIN32_VXD__) && !defined(__OS2_VDD__) && !defined(__NT_DRIVER__)
-#include <stdio.h>
-#include <string.h>
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External Intel assembler functions */
-#ifdef  __INTEL__
-/* {secret} */
-ibool   _ASMAPI _CPU_haveCPUID(void);
-/* {secret} */
-ibool   _ASMAPI _CPU_check80386(void);
-/* {secret} */
-ibool   _ASMAPI _CPU_check80486(void);
-/* {secret} */
-uint    _ASMAPI _CPU_checkCPUID(void);
-/* {secret} */
-uint    _ASMAPI _CPU_getCPUIDModel(void);
-/* {secret} */
-uint    _ASMAPI _CPU_getCPUIDStepping(void);
-/* {secret} */
-uint    _ASMAPI _CPU_getCPUIDFeatures(void);
-/* {secret} */
-uint    _ASMAPI _CPU_getCacheSize(void);
-/* {secret} */
-uint    _ASMAPI _CPU_have3DNow(void);
-/* {secret} */
-ibool   _ASMAPI _CPU_checkClone(void);
-/* {secret} */
-void    _ASMAPI _CPU_readTimeStamp(CPU_largeInteger *time);
-/* {secret} */
-void    _ASMAPI _CPU_runBSFLoop(ulong iterations);
-/* {secret} */
-ulong   _ASMAPI _CPU_mulDiv(ulong a,ulong b,ulong c);
-/* {secret} */
-void ZTimerQuickInit(void);
-#define CPU_HaveMMX     0x00800000
-#define CPU_HaveRDTSC   0x00000010
-#define CPU_HaveSSE     0x02000000
-#endif
-
-#if     defined(__SMX32__)
-#include "smx/cpuinfo.c"
-#elif   defined(__RTTARGET__)
-#include "rttarget/cpuinfo.c"
-#elif   defined(__REALDOS__)
-#include "dos/cpuinfo.c"
-#elif   defined(__NT_DRIVER__)
-#include "ntdrv/cpuinfo.c"
-#elif   defined(__WIN32_VXD__)
-#include "vxd/cpuinfo.c"
-#elif   defined(__WINDOWS32__)
-#include "win32/cpuinfo.c"
-#elif   defined(__OS2_VDD__)
-#include "vdd/cpuinfo.c"
-#elif   defined(__OS2__)
-#include "os2/cpuinfo.c"
-#elif   defined(__LINUX__)
-#include "linux/cpuinfo.c"
-#elif   defined(__QNX__)
-#include "qnx/cpuinfo.c"
-#elif   defined(__BEOS__)
-#include "beos/cpuinfo.c"
-#else
-#error  CPU library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-REMARKS:
-Read an I/O port location.
-****************************************************************************/
-static uchar rdinx(
-    int port,
-    int index)
-{
-    PM_outpb(port,(uchar)index);
-    return PM_inpb(port+1);
-}
-
-/****************************************************************************
-REMARKS:
-Write an I/O port location.
-****************************************************************************/
-static void wrinx(
-    ushort port,
-    ushort index,
-    ushort value)
-{
-    PM_outpb(port,(uchar)index);
-    PM_outpb(port+1,(uchar)value);
-}
-
-/****************************************************************************
-REMARKS:
-Enables the Cyrix CPUID instruction to properly detect MediaGX and 6x86
-processors.
-****************************************************************************/
-static void _CPU_enableCyrixCPUID(void)
-{
-    uchar   ccr3;
-
-    PM_init();
-    ccr3 = rdinx(0x22,0xC3);
-    wrinx(0x22,0xC3,(uchar)(ccr3 | 0x10));
-    wrinx(0x22,0xE8,(uchar)(rdinx(0x22,0xE8) | 0x80));
-    wrinx(0x22,0xC3,ccr3);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the type of processor in the system.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Numerical identifier for the installed processor
-
-REMARKS:
-Returns the type of processor in the system. Note that if the CPU is an
-unknown Pentium family processor that we don't have an enumeration for,
-the return value will be greater than or equal to the value of CPU_UnkPentium
-(depending on the value returned by the CPUID instruction).
-
-SEE ALSO:
-CPU_getProcessorSpeed, CPU_haveMMX, CPU_getProcessorName
-****************************************************************************/
-uint ZAPI CPU_getProcessorType(void)
-{
-#if     defined(__INTEL__)
-    uint            cpu,vendor,model,cacheSize;
-    static ibool    firstTime = true;
-
-    if (_CPU_haveCPUID()) {
-	cpu = _CPU_checkCPUID();
-	vendor = cpu & ~CPU_mask;
-	if (vendor == CPU_Intel) {
-	    /* Check for Intel processors */
-	    switch (cpu & CPU_mask) {
-		case 4: cpu = CPU_i486;         break;
-		case 5: cpu = CPU_Pentium;      break;
-		case 6:
-		    if ((model = _CPU_getCPUIDModel()) == 1)
-			cpu = CPU_PentiumPro;
-		    else if (model <= 6) {
-			cacheSize = _CPU_getCacheSize();
-			if ((model == 5 && cacheSize == 0) ||
-			    (model == 5 && cacheSize == 256) ||
-			    (model == 6 && cacheSize == 128))
-			    cpu = CPU_Celeron;
-			else
-			    cpu = CPU_PentiumII;
-			}
-		    else if (model >= 7) {
-			/* Model 7 == Pentium III */
-			/* Model 8 == Celeron/Pentium III Coppermine */
-			cacheSize = _CPU_getCacheSize();
-			if ((model == 8 && cacheSize == 128))
-			    cpu = CPU_Celeron;
-			else
-			    cpu = CPU_PentiumIII;
-			}
-		    break;
-		default:
-		    cpu = CPU_UnkIntel;
-		}
-	    }
-	else if (vendor == CPU_Cyrix) {
-	    /* Check for Cyrix processors */
-	    switch (cpu & CPU_mask) {
-		case 4:
-		    if ((model = _CPU_getCPUIDModel()) == 4)
-			cpu = CPU_CyrixMediaGX;
-		    else
-			cpu = CPU_UnkCyrix;
-		    break;
-		case 5:
-		    if ((model = _CPU_getCPUIDModel()) == 2)
-			cpu = CPU_Cyrix6x86;
-		    else if (model == 4)
-			cpu = CPU_CyrixMediaGXm;
-		    else
-			cpu = CPU_UnkCyrix;
-		    break;
-		case 6:
-		    if ((model = _CPU_getCPUIDModel()) <= 1)
-			cpu = CPU_Cyrix6x86MX;
-		    else
-			cpu = CPU_UnkCyrix;
-		    break;
-		default:
-		    cpu = CPU_UnkCyrix;
-		}
-	    }
-	else if (vendor == CPU_AMD) {
-	    /* Check for AMD processors */
-	    switch (cpu & CPU_mask) {
-		case 4:
-		    if ((model = _CPU_getCPUIDModel()) == 0)
-			cpu = CPU_AMDAm5x86;
-		    else
-			cpu = CPU_AMDAm486;
-		    break;
-		case 5:
-		    if ((model = _CPU_getCPUIDModel()) <= 3)
-			cpu = CPU_AMDK5;
-		    else if (model <= 7)
-			cpu = CPU_AMDK6;
-		    else if (model == 8)
-			cpu = CPU_AMDK6_2;
-		    else if (model == 9)
-			cpu = CPU_AMDK6_III;
-		    else if (model == 13) {
-			if (_CPU_getCPUIDStepping() <= 3)
-			    cpu = CPU_AMDK6_IIIplus;
-			else
-			    cpu = CPU_AMDK6_2plus;
-			}
-		    else
-			cpu = CPU_UnkAMD;
-		    break;
-		case 6:
-		    if ((model = _CPU_getCPUIDModel()) == 3)
-			cpu = CPU_AMDDuron;
-		    else
-			cpu = CPU_AMDAthlon;
-		    break;
-		default:
-		    cpu = CPU_UnkAMD;
-		}
-	    }
-	else if (vendor == CPU_IDT) {
-	    /* Check for IDT WinChip processors */
-	    switch (cpu & CPU_mask) {
-		case 5:
-		    if ((model = _CPU_getCPUIDModel()) <= 4)
-			cpu = CPU_WinChipC6;
-		    else if (model == 8)
-			cpu = CPU_WinChip2;
-		    else
-			cpu = CPU_UnkIDT;
-		    break;
-		default:
-		    cpu = CPU_UnkIDT;
-		}
-	    }
-	else {
-	    /* Assume a Pentium compatible Intel clone */
-	    cpu = CPU_Pentium;
-	    }
-	return cpu | vendor | (_CPU_getCPUIDStepping() << CPU_steppingShift);
-	}
-    else {
-	if (_CPU_check80386())
-	    cpu = CPU_i386;
-	else  if (_CPU_check80486()) {
-	    /* If we get here we may have a Cyrix processor so we can try
-	     * enabling the CPUID instruction and trying again.
-	     */
-	    if (firstTime) {
-		firstTime = false;
-		_CPU_enableCyrixCPUID();
-		return CPU_getProcessorType();
-		}
-	    cpu = CPU_i486;
-	    }
-	else
-	    cpu = CPU_Pentium;
-	if (!_CPU_checkClone())
-	    return cpu | CPU_Intel;
-	return cpu;
-	}
-#elif   defined(__ALPHA__)
-    return CPU_Alpha;
-#elif   defined(__MIPS__)
-    return CPU_Mips;
-#elif   defined(__PPC__)
-    return CPU_PowerPC;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports Intel MMX extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if MMX is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel MMX extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_have3DNow, CPU_haveSSE,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveMMX(void)
-{
-#ifdef  __INTEL__
-    if (_CPU_haveCPUID())
-	return (_CPU_getCPUIDFeatures() & CPU_HaveMMX) != 0;
-    return false;
-#else
-    return false;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports AMD 3DNow! extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if 3DNow! is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the AMD 3DNow! extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_haveSSE,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_have3DNow(void)
-{
-#ifdef  __INTEL__
-    if (_CPU_haveCPUID())
-	return _CPU_have3DNow();
-    return false;
-#else
-    return false;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports Intel KNI extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if Intel KNI is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel KNI extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_have3DNow,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveSSE(void)
-{
-#ifdef  __INTEL__
-    if (_CPU_haveCPUID())
-	return (_CPU_getCPUIDFeatures() & CPU_HaveSSE) != 0;
-    return false;
-#else
-    return false;
-#endif
-}
-
-/****************************************************************************
-RETURNS:
-True if the RTSC instruction is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel RDTSC
-instruction, for high precision timing. If the processor is not an Intel or
-Intel clone CPU, this function will always return false.
-
-DESCRIPTION:
-Returns true if the processor supports RDTSC extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if RTSC is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the RDTSC instruction
-for reading the processor time stamp counter.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_have3DNow,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveRDTSC(void)
-{
-#ifdef  __INTEL__
-    if (_CPU_haveCPUID())
-	return (_CPU_getCPUIDFeatures() & CPU_HaveRDTSC) != 0;
-    return false;
-#else
-    return false;
-#endif
-}
-
-#ifdef  __INTEL__
-
-#define ITERATIONS      16000
-#define SAMPLINGS       2
-#define INNER_LOOPS     400
-
-/****************************************************************************
-REMARKS:
-If processor does not support time stamp reading, but is at least a 386 or
-above, utilize method of timing a loop of BSF instructions which take a
-known number of cycles to run on i386(tm), i486(tm), and Pentium(R)
-processors.
-****************************************************************************/
-static ulong GetBSFCpuSpeed(
-    ulong cycles)
-{
-    CPU_largeInteger t0,t1,count_freq;
-    ulong   ticks;              /* Microseconds elapsed during test     */
-    ulong   current;            /* Variable to store time elapsed       */
-    int     i,j,iPriority;
-    ulong   lowest  = (ulong)-1;
-
-    iPriority = SetMaxThreadPriority();
-    GetCounterFrequency(&count_freq);
-    for (i = 0; i < SAMPLINGS; i++) {
-	GetCounter(&t0);
-	for (j = 0; j < INNER_LOOPS; j++)
-	    _CPU_runBSFLoop(ITERATIONS);
-	GetCounter(&t1);
-	current = t1.low - t0.low;
-	if (current < lowest)
-	    lowest = current;
-	}
-    RestoreThreadPriority(iPriority);
-
-    /* Compute frequency */
-    ticks = _CPU_mulDiv(lowest,1000000,count_freq.low);
-    if ((ticks % count_freq.low) > (count_freq.low/2))
-	ticks++;            /* Round up if necessary */
-    if (ticks == 0)
-	return 0;
-    return ((cycles*INNER_LOOPS)/ticks);
-}
-
-#define TOLERANCE       1
-
-/****************************************************************************
-REMARKS:
-On processors supporting the Read Time Stamp opcode, compare elapsed
-time on the High-Resolution Counter with elapsed cycles on the Time
-Stamp Register.
-
-The inner loop runs up to 20 times oruntil the average of the previous
-three calculated frequencies is within 1 MHz of each of the individual
-calculated frequencies. This resampling increases the accuracy of the
-results since outside factors could affect this calculation.
-****************************************************************************/
-static ulong GetRDTSCCpuSpeed(
-    ibool accurate)
-{
-    CPU_largeInteger    t0,t1,s0,s1,count_freq;
-    u64                 stamp0, stamp1, ticks0, ticks1;
-    u64                 total_cycles, cycles, hz, freq;
-    u64                 total_ticks, ticks;
-    int                 tries,iPriority;
-    ulong               maxCount;
-
-    PM_set64_32(total_cycles,0);
-    PM_set64_32(total_ticks,0);
-    maxCount = accurate ? 600000 : 30000;
-    iPriority = SetMaxThreadPriority();
-    GetCounterFrequency(&count_freq);
-    PM_set64(freq,count_freq.high,count_freq.low);
-    for (tries = 0; tries < 3; tries++) {
-	/* Loop until 100 ticks have passed since last read of hi-res
-	 * counter. This accounts for overhead later.
-	 */
-	GetCounter(&t0);
-	t1.low = t0.low;
-	t1.high = t0.high;
-	while ((t1.low - t0.low) < 100) {
-	    GetCounter(&t1);
-	    _CPU_readTimeStamp(&s0);
-	    }
-
-	/* Loop until 30000 ticks have passed since last read of hi-res counter.
-	 * This allows for elapsed time for sampling. For a hi-res frequency
-	 * of 1MHz, this is about 0.03 of a second. The frequency reported
-	 * by the OS dependent code should be tuned to provide a good
-	 * sample period depending on the accuracy of the OS timers (ie:
-	 * if the accuracy is lower, lower the frequency to spend more time
-	 * in the inner loop to get better accuracy).
-	 */
-	t0.low = t1.low;
-	t0.high = t1.high;
-	while ((t1.low - t0.low) < maxCount) {
-	    GetCounter(&t1);
-	    _CPU_readTimeStamp(&s1);
-	    }
-
-	/* Find the difference during the timing loop */
-	PM_set64(stamp0,s0.high,s0.low);
-	PM_set64(stamp1,s1.high,s1.low);
-	PM_set64(ticks0,t0.high,t0.low);
-	PM_set64(ticks1,t1.high,t1.low);
-	PM_sub64(cycles,stamp1,stamp0);
-	PM_sub64(ticks,ticks1,ticks0);
-
-	/* Sum up the results */
-	PM_add64(total_ticks,total_ticks,ticks);
-	PM_add64(total_cycles,total_cycles,cycles);
-	}
-    RestoreThreadPriority(iPriority);
-
-    /* Compute frequency in Hz */
-    PM_mul64(hz,total_cycles,freq);
-    PM_div64(hz,hz,total_ticks);
-    return PM_64to32(hz);
-}
-
-#endif  /* __INTEL__ */
-
-/****************************************************************************
-DESCRIPTION:
-Returns the speed of the processor in MHz.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-accurate    - True of the speed should be measured accurately
-
-RETURNS:
-Processor speed in MHz.
-
-REMARKS:
-This function returns the speed of the CPU in MHz. Note that if the speed
-cannot be determined, this function will return 0.
-
-If the accurate parameter is set to true, this function will spend longer
-profiling the speed of the CPU, and will not round the CPU speed that is
-reported. This is important for highly accurate timing using the Pentium
-RDTSC instruction, but it does take a lot longer for the profiling to
-produce accurate results.
-
-SEE ALSO:
-CPU_getProcessorSpeedInHz, CPU_getProcessorType, CPU_haveMMX,
-CPU_getProcessorName
-****************************************************************************/
-ulong ZAPI CPU_getProcessorSpeed(
-    ibool accurate)
-{
-#if defined(__INTEL__)
-    /* Number of cycles needed to execute a single BSF instruction on i386+
-     * processors.
-     */
-    ulong   cpuSpeed;
-    uint    i;
-    static  ulong intel_cycles[] = {
-	115,47,43,
-	};
-    static  ulong cyrix_cycles[] = {
-	38,38,52,52,
-	};
-    static  ulong amd_cycles[] = {
-	49,
-	};
-    static  ulong known_speeds[] = {
-	1000,950,900,850,800,750,700,650,600,550,500,450,433,400,350,
-	333,300,266,233,200,166,150,133,120,100,90,75,66,60,50,33,20,0,
-	};
-
-    if (CPU_haveRDTSC()) {
-	cpuSpeed = (GetRDTSCCpuSpeed(accurate) + 500000) / 1000000;
-	}
-    else {
-	int type = CPU_getProcessorType();
-	int processor = type & CPU_mask;
-	int vendor = type & CPU_familyMask;
-	if (vendor == CPU_Intel)
-	    cpuSpeed = GetBSFCpuSpeed(ITERATIONS * intel_cycles[processor - CPU_i386]);
-	else if (vendor == CPU_Cyrix)
-	    cpuSpeed = GetBSFCpuSpeed(ITERATIONS * cyrix_cycles[processor - CPU_Cyrix6x86]);
-	else if (vendor == CPU_AMD)
-	    cpuSpeed = GetBSFCpuSpeed(ITERATIONS * amd_cycles[0]);
-	else
-	    return 0;
-	}
-
-    /* Now normalise the results given known processors speeds, if the
-     * speed we measure is within 2MHz of the expected values
-     */
-    if (!accurate) {
-	for (i = 0; known_speeds[i] != 0; i++) {
-	    if (cpuSpeed >= (known_speeds[i]-3) && cpuSpeed <= (known_speeds[i]+3)) {
-		return known_speeds[i];
-		}
-	    }
-	}
-    return cpuSpeed;
-#else
-    return 0;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the speed of the processor in Hz.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Accurate processor speed in Hz.
-
-REMARKS:
-This function returns the accurate speed of the CPU in Hz. Note that if the
-speed cannot be determined, this function will return 0.
-
-This function is similar to the CPU_getProcessorSpeed function, except that
-it attempts to accurately measure the CPU speed in Hz. This is used
-internally in the Zen Timer libraries to provide accurate real world timing
-information. This is important for highly accurate timing using the Pentium
-RDTSC instruction, but it does take a lot longer for the profiling to
-produce accurate results.
-
-SEE ALSO:
-CPU_getProcessorSpeed, CPU_getProcessorType, CPU_haveMMX,
-CPU_getProcessorName
-****************************************************************************/
-ulong ZAPI CPU_getProcessorSpeedInHZ(
-    ibool accurate)
-{
-#if defined(__INTEL__)
-    if (CPU_haveRDTSC()) {
-	return GetRDTSCCpuSpeed(accurate);
-	}
-    return CPU_getProcessorSpeed(false) * 1000000;
-#else
-    return 0;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns a string defining the speed and name of the processor.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Processor name string.
-
-REMARKS:
-This function returns an English string describing the speed and name of the
-CPU.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_haveMMX, CPU_getProcessorName
-****************************************************************************/
-char * ZAPI CPU_getProcessorName(void)
-{
-#if defined(__INTEL__)
-    static int  cpu,speed = -1;
-    static char name[80];
-
-    if (speed == -1) {
-	cpu = CPU_getProcessorType();
-	speed = CPU_getProcessorSpeed(false);
-	}
-    sprintf(name,"%d MHz ", speed);
-    switch (cpu & CPU_mask) {
-	case CPU_i386:
-	    strcat(name,"Intel i386 processor");
-	    break;
-	case CPU_i486:
-	    strcat(name,"Intel i486 processor");
-	    break;
-	case CPU_Pentium:
-	    strcat(name,"Intel Pentium processor");
-	    break;
-	case CPU_PentiumPro:
-	    strcat(name,"Intel Pentium Pro processor");
-	    break;
-	case CPU_PentiumII:
-	    strcat(name,"Intel Pentium II processor");
-	    break;
-	case CPU_Celeron:
-	    strcat(name,"Intel Celeron processor");
-	    break;
-	case CPU_PentiumIII:
-	    strcat(name,"Intel Pentium III processor");
-	    break;
-	case CPU_UnkIntel:
-	    strcat(name,"Unknown Intel processor");
-	    break;
-	case CPU_Cyrix6x86:
-	    strcat(name,"Cyrix 6x86 processor");
-	    break;
-	case CPU_Cyrix6x86MX:
-	    strcat(name,"Cyrix 6x86MX processor");
-	    break;
-	case CPU_CyrixMediaGX:
-	    strcat(name,"Cyrix MediaGX processor");
-	    break;
-	case CPU_CyrixMediaGXm:
-	    strcat(name,"Cyrix MediaGXm processor");
-	    break;
-	case CPU_UnkCyrix:
-	    strcat(name,"Unknown Cyrix processor");
-	    break;
-	case CPU_AMDAm486:
-	    strcat(name,"AMD Am486 processor");
-	    break;
-	case CPU_AMDAm5x86:
-	    strcat(name,"AMD Am5x86 processor");
-	    break;
-	case CPU_AMDK5:
-	    strcat(name,"AMD K5 processor");
-	    break;
-	case CPU_AMDK6:
-	    strcat(name,"AMD K6 processor");
-	    break;
-	case CPU_AMDK6_2:
-	    strcat(name,"AMD K6-2 processor");
-	    break;
-	case CPU_AMDK6_III:
-	    strcat(name,"AMD K6-III processor");
-	    break;
-	case CPU_AMDK6_2plus:
-	    strcat(name,"AMD K6-2+ processor");
-	    break;
-	case CPU_AMDK6_IIIplus:
-	    strcat(name,"AMD K6-III+ processor");
-	    break;
-	case CPU_UnkAMD:
-	    strcat(name,"Unknown AMD processor");
-	    break;
-	case CPU_AMDAthlon:
-	    strcat(name,"AMD Athlon processor");
-	    break;
-	case CPU_AMDDuron:
-	    strcat(name,"AMD Duron processor");
-	    break;
-	case CPU_WinChipC6:
-	    strcat(name,"IDT WinChip C6 processor");
-	    break;
-	case CPU_WinChip2:
-	    strcat(name,"IDT WinChip 2 processor");
-	    break;
-	case CPU_UnkIDT:
-	    strcat(name,"Unknown IDT processor");
-	    break;
-	default:
-	    strcat(name,"Unknown processor");
-	}
-    if (CPU_haveMMX())
-	strcat(name," with MMX(R)");
-    if (CPU_have3DNow())
-	strcat(name,", 3DNow!(R)");
-    if (CPU_haveSSE())
-	strcat(name,", SSE(R)");
-    return name;
-#else
-    return "Unknown";
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/debug.c b/board/MAI/bios_emulator/scitech/src/pm/debug.c
deleted file mode 100644
index 751bf098fc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/debug.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Main module containing debug checking features.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifdef  __WIN32_VXD__
-#include "vxdfile.h"
-#elif defined(__NT_DRIVER__)
-#include "ntdriver.h"
-#elif defined(__OS2_VDD__)
-#include "vddfile.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#endif
-
-/*---------------------------- Global variables ---------------------------*/
-
-/* {secret} */
-void (*_CHK_fail)(int fatal,const char *msg,const char *cond,const char *file,int line) = _CHK_defaultFail;
-static char logFile[256] = "";
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef  CHECKED
-void _CHK_defaultFail(
-    int fatal,
-    const char *msg,
-    const char *cond,
-    const char *file,
-    int line)
-{
-    FILE    *f;
-    char    buf[256];
-
-    if (logFile[0] == 0) {
-	strcpy(logFile,PM_getNucleusPath());
-	PM_backslash(logFile);
-	strcat(logFile,"scitech.log");
-	}
-    if ((f = fopen(logFile,"a+")) != NULL) {
-#if defined(__WIN32_VXD__) || defined(__OS2_VDD__) || defined(__NT_DRIVER__)
-	sprintf(buf,msg,cond,file,line);
-	fwrite(buf,1,strlen(buf),f);
-#else
-	fprintf(f,msg,cond,file,line);
-#endif
-	fclose(f);
-	}
-    if (fatal) {
-	sprintf(buf,"Check failed: check '%s' for details", logFile);
-	PM_fatalError(buf);
-	}
-}
-#endif
-
-/****************************************************************************
-DESCRIPTION:
-Sets the location of the debug log file.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-logFilePath - Full file and path name to debug log file.
-
-REMARKS:
-Sets the name and location of the debug log file. The debug log file is
-created and written to when runtime checks, warnings and failure conditions
-are logged to disk when code is compiled in CHECKED mode. By default the
-log file is called 'scitech.log' and goes into the current SciTech Nucleus
-path for the application. You can use this function to set the filename
-and location of the debug log file to your own application specific
-directory.
-****************************************************************************/
-void PMAPI PM_setDebugLog(
-    const char *logFilePath)
-{
-    strcpy(logFile,logFilePath);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm
deleted file mode 100644
index 36dcaab67b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm
+++ /dev/null
@@ -1,194 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech Multi-platform Graphics Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Assembly language support routines for the event module.
-;*
-;****************************************************************************
-
-        ideal
-
-include "scitech.mac"           ; Memory model macros
-
-ifdef flatmodel
-
-header  _event                  ; Set up memory model
-
-begdataseg  _event
-
-    cextern  _EVT_biosPtr,DPTR
-
-ifdef   USE_NASM
-%define KB_HEAD     WORD esi+01Ah   ; Keyboard buffer head in BIOS data area
-%define KB_TAIL     WORD esi+01Ch   ; Keyboard buffer tail in BIOS data area
-%define KB_START    WORD esi+080h   ; Start of keyboard buffer in BIOS data area
-%define KB_END      WORD esi+082h   ; End of keyboard buffer in BIOS data area
-else
-KB_HEAD     EQU WORD esi+01Ah       ; Keyboard buffer head in BIOS data area
-KB_TAIL     EQU WORD esi+01Ch       ; Keyboard buffer tail in BIOS data area
-KB_START    EQU WORD esi+080h       ; Start of keyboard buffer in BIOS data area
-KB_END      EQU WORD esi+082h       ; End of keyboard buffer in BIOS data area
-endif
-
-enddataseg  _event
-
-begcodeseg  _event              ; Start of code segment
-
-    cpublic _EVT_codeStart
-
-;----------------------------------------------------------------------------
-; int _EVT_getKeyCode(void)
-;----------------------------------------------------------------------------
-; Returns the key code for the next available key by extracting it from
-; the BIOS keyboard buffer.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_getKeyCode
-
-        enter_c
-
-        mov     esi,[_EVT_biosPtr]
-        xor     ebx,ebx
-        xor     eax,eax
-        mov     bx,[KB_HEAD]
-        cmp     bx,[KB_TAIL]
-        jz      @@Done
-        xor     eax,eax
-        mov     ax,[esi+ebx]    ; EAX := character from keyboard buffer
-        inc     _bx
-        inc     _bx
-        cmp     bx,[KB_END]     ; Hit the end of the keyboard buffer?
-        jl      @@1
-        mov     bx,[KB_START]
-@@1:    mov     [KB_HEAD],bx    ; Update keyboard buffer head pointer
-
-@@Done: leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_pumpMessages(void)
-;----------------------------------------------------------------------------
-; This function would normally do nothing, however due to strange bugs
-; in the Windows 3.1 and OS/2 DOS boxes, we don't get any hardware keyboard
-; interrupts unless we periodically call the BIOS keyboard functions. Hence
-; this function gets called every time that we check for events, and works
-; around this problem (in essence it tells the DOS VDM to pump the
-; keyboard events to our program ;-).
-;
-; Note that this bug is not present under Win 9x DOS boxes.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_pumpMessages
-
-        mov     ah,11h          ; Function - Check keyboard status
-        int     16h             ; Call BIOS
-        
-        mov     ax, 0Bh         ; Reset Move Mouse
-        int     33h
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_disableInt
-
-        pushf                   ; Put flag word on stack
-        cli                     ; Disable interrupts!
-        pop     eax             ; deposit flag word in return register
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_restoreInt(int ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_restoreInt
-
-        ARG     ps:UINT
-
-        push    ebp
-        mov     ebp,esp         ; Set up stack frame
-        push    [DWORD ps]
-        popf                    ; Restore processor status (and interrupts)
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int EVT_rdinx(int port,int index)
-;----------------------------------------------------------------------------
-; Reads an indexed register value from an I/O port.
-;----------------------------------------------------------------------------
-cprocstart  EVT_rdinx
-
-        ARG     port:UINT, index:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     edx,[port]
-        mov     al,[BYTE index]
-        out     dx,al
-        inc     dx
-        in      al,dx
-        movzx   eax,al
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void EVT_wrinx(int port,int index,int value)
-;----------------------------------------------------------------------------
-; Writes an indexed register value to an I/O port.
-;----------------------------------------------------------------------------
-cprocstart  EVT_wrinx
-
-        ARG     port:UINT, index:UINT, value:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     edx,[port]
-        mov     al,[BYTE index]
-        mov     ah,[BYTE value]
-        out     dx,ax
-        pop     ebp
-        ret
-
-cprocend
-
-    cpublic _EVT_codeEnd
-
-endcodeseg  _event
-
-endif
-
-        END                         ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm
deleted file mode 100644
index a4a9c7916e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm
+++ /dev/null
@@ -1,438 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NASM or TASM Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Uses the 8253 timer and the BIOS time-of-day count to time
-;*              the performance of code that takes less than an hour to
-;*              execute.
-;*
-;*              The routines in this package only works with interrupts
-;*              enabled, and in fact will explicitly turn interrupts on
-;*              in order to ensure we get accurate results from the timer.
-;*
-;*  Externally 'C' callable routines:
-;*
-;*  LZ_timerOn:     Saves the BIOS time of day count and starts the
-;*                  long period Zen Timer.
-;*
-;*  LZ_timerLap:    Latches the current count, and keeps the timer running
-;*
-;*  LZ_timerOff:    Stops the long-period Zen Timer and saves the timer
-;*                  count and the BIOS time of day count.
-;*
-;*  LZ_timerCount:  Returns an unsigned long representing the timed count
-;*                  in microseconds. If more than an hour passed during
-;*                  the timing interval, LZ_timerCount will return the
-;*                  value 0xFFFFFFFF (an invalid count).
-;*
-;*  Note:   If either more than an hour passes between calls to LZ_timerOn
-;*          and LZ_timerOff, an error is reported. For timing code that takes
-;*          more than a few minutes to execute, use the low resolution
-;*          Ultra Long Period Zen Timer code, which should be accurate
-;*          enough for most purposes.
-;*
-;*  Note:   Each block of code being timed should ideally be run several
-;*          times, with at least two similar readings required to
-;*          establish a true measurement, in order to eliminate any
-;*          variability caused by interrupts.
-;*
-;*  Note:   Interrupts must not be disabled for more than 54 ms at a
-;*          stretch during the timing interval. Because interrupts are
-;*          enabled, key, mice, and other devices that generate interrupts
-;*          should not be used during the timing interval.
-;*
-;*  Note:   Any extra code running off the timer interrupt (such as
-;*          some memory resident utilities) will increase the time
-;*          measured by the Zen Timer.
-;*
-;*  Note:   These routines can introduce inaccuracies of up to a few
-;*          tenths of a second into the system clock count for each
-;*          code section being timed. Consequently, it's a good idea to
-;*          reboot at the conclusion of timing sessions. (The
-;*          battery-backed clock, if any, is not affected by the Zen
-;*          timer.)
-;*
-;*  All registers and all flags are preserved by all routines, except
-;*  interrupts which are always turned on
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"
-
-;****************************************************************************
-;
-; Equates used by long period Zen Timer
-;
-;****************************************************************************
-
-; Base address of 8253 timer chip
-
-BASE_8253       equ     40h
-
-; The address of the timer 0 count registers in the 8253
-
-TIMER_0_8253    equ     BASE_8253 + 0
-
-; The address of the mode register in the 8253
-
-MODE_8253       equ     BASE_8253 + 3
-
-; The address of the BIOS timer count variable in the BIOS data area.
-
-TIMER_COUNT     equ     6Ch
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-endif
-
-header      _lztimer
-
-begdataseg  _lztimer
-
-        cextern  _ZTimerBIOSPtr,DPTR
-
-StartBIOSCount      dd  0       ; Starting BIOS count dword
-EndBIOSCount        dd  0       ; Ending BIOS count dword
-EndTimedCount       dw  0       ; Timer 0 count at the end of timing period
-
-enddataseg  _lztimer
-
-begcodeseg  _lztimer                ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void LZ_timerOn(void);
-;----------------------------------------------------------------------------
-; Starts the Long period Zen timer counting.
-;----------------------------------------------------------------------------
-cprocstart  LZ_timerOn
-
-; Set the timer 0 of the 8253 to mode 2 (divide-by-N), to cause
-; linear counting rather than count-by-two counting. Also stops
-; timer 0 until the timer count is loaded, except on PS/2 computers.
-
-        mov     al,00110100b        ; mode 2
-        out     MODE_8253,al
-
-; Set the timer count to 0, so we know we won't get another timer
-; interrupt right away. Note: this introduces an inaccuracy of up to 54 ms
-; in the system clock count each time it is executed.
-
-        DELAY
-        sub     al,al
-        out     TIMER_0_8253,al     ; lsb
-        DELAY
-        out     TIMER_0_8253,al     ; msb
-
-; Store the timing start BIOS count
-
-        use_es
-ifdef   flatmodel
-        mov     ebx,[_ZTimerBIOSPtr]
-else
-        les     bx,[_ZTimerBIOSPtr]
-endif
-        cli                         ; No interrupts while we grab the count
-        mov     eax,[_ES _bx+TIMER_COUNT]
-        sti
-        mov     [StartBIOSCount],eax
-        unuse_es
-
-; Set the timer count to 0 again to start the timing interval.
-
-        mov     al,00110100b        ; set up to load initial
-        out     MODE_8253,al        ; timer count
-        DELAY
-        sub     al,al
-        out     TIMER_0_8253,al     ; load count lsb
-        DELAY
-        out     TIMER_0_8253,al     ; load count msb
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void LZ_timerOff(void);
-;----------------------------------------------------------------------------
-; Stops the long period Zen timer and saves count.
-;----------------------------------------------------------------------------
-cprocstart  LZ_timerOff
-
-; Latch the timer count.
-
-        mov     al,00000000b        ; latch timer 0
-        out     MODE_8253,al
-        cli                         ; Stop the BIOS count
-
-; Read the BIOS count. (Since interrupts are disabled, the BIOS
-; count won't change).
-
-        use_es
-ifdef   flatmodel
-        mov     ebx,[_ZTimerBIOSPtr]
-else
-        les     bx,[_ZTimerBIOSPtr]
-endif
-        mov     eax,[_ES _bx+TIMER_COUNT]
-        mov     [EndBIOSCount],eax
-        unuse_es
-
-; Read out the count we latched earlier.
-
-        in      al,TIMER_0_8253     ; least significant byte
-        DELAY
-        mov     ah,al
-        in      al,TIMER_0_8253     ; most significant byte
-        xchg    ah,al
-        neg     ax                  ; Convert from countdown remaining
-                                    ;  to elapsed count
-        mov     [EndTimedCount],ax
-        sti                         ; Let the BIOS count continue
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; unsigned long LZ_timerLap(void)
-;----------------------------------------------------------------------------
-; Latches the current count and converts it to a microsecond timing value,
-; but leaves the timer still running. We dont check for and overflow,
-; where the time has gone over an hour in this routine, since we want it
-; to execute as fast as possible.
-;----------------------------------------------------------------------------
-cprocstart  LZ_timerLap
-
-        push    ebx                 ; Save EBX for 32 bit code
-
-; Latch the timer count.
-
-        mov     al,00000000b        ; latch timer 0
-        out     MODE_8253,al
-        cli                         ; Stop the BIOS count
-
-; Read the BIOS count. (Since interrupts are disabled, the BIOS
-; count wont change).
-
-        use_es
-ifdef   flatmodel
-        mov     ebx,[_ZTimerBIOSPtr]
-else
-        les     bx,[_ZTimerBIOSPtr]
-endif
-        mov     eax,[_ES _bx+TIMER_COUNT]
-        mov     [EndBIOSCount],eax
-        unuse_es
-
-; Read out the count we latched earlier.
-
-        in      al,TIMER_0_8253     ; least significant byte
-        DELAY
-        mov     ah,al
-        in      al,TIMER_0_8253     ; most significant byte
-        xchg    ah,al
-        neg     ax                  ; Convert from countdown remaining
-                                    ;  to elapsed count
-        mov     [EndTimedCount],ax
-        sti                         ; Let the BIOS count continue
-
-; See if a midnight boundary has passed and adjust the finishing BIOS
-; count by the number of ticks in 24 hours. We wont be able to detect
-; more than 24 hours, but at least we can time across a midnight
-; boundary
-
-        mov     eax,[EndBIOSCount]      ; Is end < start?
-        cmp     eax,[StartBIOSCount]
-        jae     @@CalcBIOSTime          ; No, calculate the time taken
-
-; Adjust the finishing time by adding the number of ticks in 24 hours
-; (1573040).
-
-        add     [DWORD EndBIOSCount],1800B0h
-
-; Convert the BIOS time to microseconds
-
-@@CalcBIOSTime:
-        mov     ax,[WORD EndBIOSCount]
-        sub     ax,[WORD StartBIOSCount]
-        mov     dx,54925            ; Number of microseconds each
-                                    ;  BIOS count represents.
-        mul     dx
-        mov     bx,ax               ; set aside BIOS count in
-        mov     cx,dx               ;  microseconds
-
-; Convert timer count to microseconds
-
-        push    _si
-        mov     ax,[EndTimedCount]
-        mov     si,8381
-        mul     si
-        mov     si,10000
-        div     si                  ; * 0.8381 = * 8381 / 10000
-        pop     _si
-
-; Add the timer and BIOS counts together to get an overall time in
-; microseconds.
-
-        add     ax,bx
-        adc     cx,0
-ifdef flatmodel
-        shl     ecx,16
-        mov     cx,ax
-        mov     eax,ecx             ; EAX := timer count
-else
-        mov     dx,cx
-endif
-        pop     ebx                 ; Restore EBX for 32 bit code
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; unsigned long LZ_timerCount(void);
-;----------------------------------------------------------------------------
-; Returns an unsigned long representing the net time in microseconds.
-;
-; If an hour has passed while timing, we return 0xFFFFFFFF as the count
-; (which is not a possible count in itself).
-;----------------------------------------------------------------------------
-cprocstart  LZ_timerCount
-
-        push    ebx                 ; Save EBX for 32 bit code
-
-; See if a midnight boundary has passed and adjust the finishing BIOS
-; count by the number of ticks in 24 hours. We wont be able to detect
-; more than 24 hours, but at least we can time across a midnight
-; boundary
-
-        mov     eax,[EndBIOSCount]      ; Is end < start?
-        cmp     eax,[StartBIOSCount]
-        jae     @@CheckForHour          ; No, check for hour passing
-
-; Adjust the finishing time by adding the number of ticks in 24 hours
-; (1573040).
-
-        add     [DWORD EndBIOSCount],1800B0h
-
-; See if more than an hour passed during timing. If so, notify the user.
-
-@@CheckForHour:
-        mov     ax,[WORD StartBIOSCount+2]
-        cmp     ax,[WORD EndBIOSCount+2]
-        jz      @@CalcBIOSTime      ; Hour count didn't change, so
-                                    ;  everything is fine
-
-        inc     ax
-        cmp     ax,[WORD EndBIOSCount+2]
-        jnz     @@TestTooLong       ; Two hour boundaries passed, so the
-                                    ;  results are no good
-        mov     ax,[WORD EndBIOSCount]
-        cmp     ax,[WORD StartBIOSCount]
-        jb      @@CalcBIOSTime      ; a single hour boundary passed. That's
-                                    ; OK, so long as the total time wasn't
-                                    ; more than an hour.
-
-; Over an hour elapsed passed during timing, which renders
-; the results invalid. Notify the user. This misses the case where a
-; multiple of 24 hours has passed, but we'll rely on the perspicacity of
-; the user to detect that case :-).
-
-@@TestTooLong:
-ifdef   flatmodel
-        mov     eax,0FFFFFFFFh
-else
-        mov     ax,0FFFFh
-        mov     dx,0FFFFh
-endif
-        jmp     short @@Done
-
-; Convert the BIOS time to microseconds
-
-@@CalcBIOSTime:
-        mov     ax,[WORD EndBIOSCount]
-        sub     ax,[WORD StartBIOSCount]
-        mov     dx,54925            ; Number of microseconds each
-                                    ;  BIOS count represents.
-        mul     dx
-        mov     bx,ax               ; set aside BIOS count in
-        mov     cx,dx               ;  microseconds
-
-; Convert timer count to microseconds
-
-        push    _si
-        mov     ax,[EndTimedCount]
-        mov     si,8381
-        mul     si
-        mov     si,10000
-        div     si                  ; * 0.8381 = * 8381 / 10000
-        pop     _si
-
-; Add the timer and BIOS counts together to get an overall time in
-; microseconds.
-
-        add     ax,bx
-        adc     cx,0
-ifdef flatmodel
-        shl     ecx,16
-        mov     cx,ax
-        mov     eax,ecx             ; EAX := timer count
-else
-        mov     dx,cx
-endif
-
-@@Done: pop     ebx                 ; Restore EBX for 32 bit code
-        ret
-
-cprocend
-
-cprocstart   LZ_disable
-        cli
-        ret
-cprocend
-
-cprocstart   LZ_enable
-        sti
-        ret
-cprocend
-
-endcodeseg  _lztimer
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm
deleted file mode 100644
index 42b5cf3692..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm
+++ /dev/null
@@ -1,656 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: IBM PC Real mode and 16/32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              MSDOS.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pmdos                  ; Set up memory model
-
-begdataseg  _pmdos
-
-ifndef  flatmodel
-
-struc   rmregs_s
-ax          dw  ?
-ax_high     dw  ?
-bx          dw  ?
-bx_high     dw  ?
-cx          dw  ?
-cx_high     dw  ?
-dx          dw  ?
-dx_high     dw  ?
-si          dw  ?
-si_high     dw  ?
-di          dw  ?
-di_high     dw  ?
-cflag       dw  ?
-cflag_high  dw  ?
-ends    rmregs_s
-RMREGS  = (rmregs_s PTR es:bx)
-
-struc   rmsregs_s
-es      dw  ?
-cs      dw  ?
-ss      dw  ?
-ds      dw  ?
-ends    rmsregs_s
-RMSREGS = (rmsregs_s PTR es:bx)
-
-endif   ; !flatmodel
-
-ifdef flatmodel
-    cextern _PM_savedDS,USHORT
-    cextern _PM_VXD_off,UINT
-    cextern _PM_VXD_sel,UINT
-ifdef   DOS4GW
-    cextern _PM_haveCauseWay,UINT
-endif
-endif
-intel_id        db  "GenuineIntel"  ; Intel vendor ID
-
-PMHELP_GETPDB       EQU 0026h
-PMHELP_FLUSHTLB     EQU 0027h
-
-enddataseg  _pmdos
-
-P586
-
-begcodeseg  _pmdos                  ; Start of code segment
-
-ifndef  flatmodel
-
-;----------------------------------------------------------------------------
-; void PM_callRealMode(unsigned s,unsigned o, RMREGS *regs,
-;   RMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Calls a real mode procedure, loading the appropriate registers values
-; from the passed in structures. Only the DS and ES register are loaded
-; from the SREGS structure.
-;----------------------------------------------------------------------------
-cprocstart  PM_callRealMode
-
-        ARG     s:WORD, o:WORD, regs:DWORD, sregs:DWORD
-
-        LOCAL   addr:DWORD, bxVal:WORD, esVal:WORD, flags:WORD = LocalSize
-
-        enter_c
-        push    ds
-        push    es
-
-        mov     ax,[o]              ; Build the address to call in 'addr'
-        mov     [WORD addr],ax
-        mov     ax,[s]
-        mov     [WORD addr+2],ax
-
-        les     bx,[sregs]
-        mov     ax,[RMSREGS.ds]
-        mov     ds,ax               ; DS := passed in value
-        mov     ax,[RMSREGS.es]
-        mov     [esVal],ax
-        les     bx,[regs]
-        mov     ax,[RMREGS.bx]
-        mov     [bxVal],ax
-        mov     ax,[RMREGS.ax]      ; AX := passed in value
-        mov     cx,[RMREGS.cx]      ; CX := passed in value
-        mov     dx,[RMREGS.dx]      ; DX := passed in value
-        mov     si,[RMREGS.si]      ; SI := passed in value
-        mov     di,[RMREGS.di]      ; DI := passed in value
-        push    bp
-        push    [esVal]
-        pop     es                  ; ES := passed in value
-        mov     bx,[bxVal]          ; BX := passed in value
-
-        call    [addr]              ; Call the specified routine
-
-        pushf                       ; Save flags for later
-        pop     [flags]
-
-        pop     bp
-        push    es
-        pop     [esVal]
-        push    bx
-        pop     [bxVal]
-        les     bx,[sregs]
-        push    ds
-        pop     [RMSREGS.ds]        ; Save value of DS
-        push    [esVal]
-        pop     [RMSREGS.es]        ; Save value of ES
-        les     bx,[regs]
-        mov     [RMREGS.ax],ax      ; Save value of AX
-        mov     [RMREGS.cx],cx      ; Save value of CX
-        mov     [RMREGS.dx],dx      ; Save value of DX
-        mov     [RMREGS.si],si      ; Save value of SI
-        mov     [RMREGS.di],di      ; Save value of DI
-        mov     ax,[flags]          ; Return flags
-        and     ax,1h               ; Isolate carry flag
-        mov     [RMREGS.cflag],ax   ; Save carry flag status
-        mov     ax,[bxVal]
-        mov     [RMREGS.bx],ax      ; Save value of BX
-
-        pop     es
-        pop     ds
-        leave_c
-        ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_segread
-
-        ARG     sregs:DPTR
-
-        enter_c
-
-        mov     ax,es
-        _les    _si,[sregs]
-        mov     [_ES _si],ax
-        mov     [_ES _si+2],cs
-        mov     [_ES _si+4],ss
-        mov     [_ES _si+6],ds
-        mov     [_ES _si+8],fs
-        mov     [_ES _si+10],gs
-
-        leave_c
-        ret
-
-cprocend
-
-; Create a table of the 256 different interrupt calls that we can jump
-; into
-
-ifdef   USE_NASM
-
-%assign intno 0
-
-intTable:
-%rep    256
-        db      0CDh
-        db      intno
-%assign intno   intno + 1
-        ret
-        nop
-%endrep
-
-else
-
-intno = 0
-
-intTable:
-        REPT    256
-        db      0CDh
-        db      intno
-intno = intno + 1
-        ret
-        nop
-        ENDM
-
-endif
-
-;----------------------------------------------------------------------------
-; _PM_genInt    - Generate the appropriate interrupt
-;----------------------------------------------------------------------------
-cprocnear   _PM_genInt
-
-        push    _ax                     ; Save _ax
-        push    _bx                     ; Save _bx
-ifdef flatmodel
-        mov     ebx,[UINT esp+12]       ; EBX := interrupt number
-else
-        mov     bx,sp                   ; Make sure ESP is zeroed
-        mov     bx,[UINT ss:bx+6]       ; BX := interrupt number
-endif
-        mov     _ax,offset intTable     ; Point to interrupt generation table
-        shl     _bx,2                   ; _BX := index into table
-        add     _ax,_bx                 ; _AX := pointer to interrupt code
-ifdef flatmodel
-        xchg    eax,[esp+4]             ; Restore eax, and set for int
-else
-        mov     bx,sp
-        xchg    ax,[ss:bx+2]            ; Restore ax, and set for int
-endif
-        pop     _bx                     ; restore _bx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_int386x
-
-        ARG     intno:UINT, inptr:DPTR, outptr:DPTR, sregs:DPTR
-
-        LOCAL   flags:UINT, sv_ds:UINT, sv_esi:ULONG = LocalSize
-
-        enter_c
-        push    ds
-        push    es                  ; Save segment registers
-        push    fs
-        push    gs
-
-        _lds    _si,[sregs]         ; DS:_SI -> Load segment registers
-        mov     es,[_si]
-        mov     bx,[_si+6]
-        mov     [sv_ds],_bx         ; Save value of user DS on stack
-        mov     fs,[_si+8]
-        mov     gs,[_si+10]
-
-        _lds    _si,[inptr]         ; Load CPU registers
-        mov     eax,[_si]
-        mov     ebx,[_si+4]
-        mov     ecx,[_si+8]
-        mov     edx,[_si+12]
-        mov     edi,[_si+20]
-        mov     esi,[_si+16]
-
-        push    ds                  ; Save value of DS
-        push    _bp                 ; Some interrupts trash this!
-        clc                         ; Generate the interrupt
-        push    [UINT intno]
-        mov     ds,[WORD sv_ds]     ; Set value of user's DS selector
-        call    _PM_genInt
-        pop     _bp                 ; Pop intno from stack (flags unchanged)
-        pop     _bp                 ; Restore value of stack frame pointer
-        pop     ds                  ; Restore value of DS
-
-        pushf                       ; Save flags for later
-        pop     [UINT flags]
-        push    esi                 ; Save ESI for later
-        pop     [DWORD sv_esi]
-        push    ds                  ; Save DS for later
-        pop     [UINT sv_ds]
-
-        _lds    _si,[outptr]        ; Save CPU registers
-        mov     [_si],eax
-        mov     [_si+4],ebx
-        mov     [_si+8],ecx
-        mov     [_si+12],edx
-        push    [DWORD sv_esi]
-        pop     [DWORD _si+16]
-        mov     [_si+20],edi
-
-        mov     _bx,[flags]         ; Return flags
-        and     ebx,1h              ; Isolate carry flag
-        mov     [_si+24],ebx        ; Save carry flag status
-
-        _lds    _si,[sregs]         ; Save segment registers
-        mov     [_si],es
-        mov     _bx,[sv_ds]
-        mov     [_si+6],bx          ; Get returned DS from stack
-        mov     [_si+8],fs
-        mov     [_si+10],gs
-
-        pop     gs                  ; Restore segment registers
-        pop     fs
-        pop     es
-        pop     ds
-        leave_c
-        ret
-
-cprocend
-
-ifndef flatmodel
-_PM_savedDS     dw  _DATA           ; Saved value of DS
-endif
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_saveDS
-
-ifdef flatmodel
-        mov     [_PM_savedDS],ds    ; Store away in data segment
-endif
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_loadDS
-
-        mov     ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
-        ret
-
-cprocend
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; ibool DPMI_allocateCallback(void (*pmcode)(), void *rmregs, long *RMCB)
-;----------------------------------------------------------------------------
-cprocstart  _DPMI_allocateCallback
-
-        ARG     pmcode:CPTR, rmregs:DPTR, RMCB:DPTR
-
-        enter_c
-        push    ds
-        push    es
-
-        push    cs
-        pop     ds
-        mov     esi,[pmcode]    ; DS:ESI -> protected mode code to call
-        mov     edi,[rmregs]    ; ES:EDI -> real mode register buffer
-        mov     ax,303h         ; AX := allocate realmode callback function
-        int     31h
-        mov     eax,0           ; Return failure!
-        jc      @@Fail
-
-        mov     eax,[RMCB]
-        shl     ecx,16
-        mov     cx,dx
-        mov     [es:eax],ecx    ; Return real mode address
-        mov     eax,1           ; Return success!
-
-@@Fail: pop     es
-        pop     ds
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void DPMI_freeCallback(long RMCB)
-;----------------------------------------------------------------------------
-cprocstart  _DPMI_freeCallback
-
-        ARG     RMCB:ULONG
-
-        enter_c
-
-        mov     cx,[WORD RMCB+2]
-        mov     dx,[WORD RMCB]  ; CX:DX := real mode callback
-        mov     ax,304h
-        int     31h
-
-        leave_c
-        ret
-
-cprocend
-
-endif
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_readCMOS
-
-        ARG     index:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-        mov     ah,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        sti
-        mov     al,ah               ; Return value in AL
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_writeCMOS
-
-        ARG     index:UINT, value:UCHAR
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        mov     al,[value]
-        out     71h,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        sti
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-ifdef   flatmodel
-
-;----------------------------------------------------------------------------
-; int _PM_pagingEnabled(void)
-;----------------------------------------------------------------------------
-; Returns 1 if paging is enabled, 0 if not or -1 if not at ring 0
-;----------------------------------------------------------------------------
-cprocstart  _PM_pagingEnabled
-
-        mov     eax,-1
-ifdef   DOS4GW
-        mov     cx,cs
-        and     ecx,3
-        jz      @@Ring0
-        cmp     [UINT _PM_haveCauseWay],0
-        jnz     @@Ring0
-        jmp     @@Exit
-
-@@Ring0:
-        mov     eax,cr0                 ; Load CR0
-        shr     eax,31                  ; Isolate paging enabled bit
-endif
-@@Exit: ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart  _PM_getPDB
-
-ifdef   DOS4GW
-        mov     ax,cs
-        and     eax,3
-        jz      @@Ring0
-        cmp     [UINT _PM_haveCauseWay],0
-        jnz     @@Ring0
-endif
-
-; Call VxD if running at ring 3 in a DOS box
-
-        cmp     [WORD _PM_VXD_sel],0
-        jz      @@Fail
-        mov     eax,PMHELP_GETPDB
-ifdef   USE_NASM
-        call    far dword [_PM_VXD_off]
-else
-        call    [FCPTR _PM_VXD_off]
-endif
-        ret
-
-@@Ring0:
-ifdef   DOS4GW
-        mov     eax,cr3
-        and     eax,0FFFFF000h
-        ret
-endif
-@@Fail: xor     eax,eax
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_flushTLB - Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart  PM_flushTLB
-
-        mov     ax,cs
-        and     eax,3
-        jz      @@Ring0
-ifdef   DOS4GW
-        cmp     [UINT _PM_haveCauseWay],0
-        jnz     @@Ring0
-endif
-
-; Call VxD if running at ring 3 in a DOS box
-
-        cmp     [WORD _PM_VXD_sel],0
-        jz      @@Fail
-        mov     eax,PMHELP_FLUSHTLB
-ifdef   USE_NASM
-        call    far dword [_PM_VXD_off]
-else
-        call    [FCPTR _PM_VXD_off]
-endif
-        ret
-
-@@Ring0:
-ifdef   DOS4GW
-        wbinvd                  ; Flush the CPU cache
-        mov     eax,cr3
-        mov     cr3,eax         ; Flush the TLB
-endif
-@@Fail: ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; void _PM_VxDCall(VXD_regs far *r,uint off,uint sel);
-;----------------------------------------------------------------------------
-cprocstart  _PM_VxDCall
-
-        ARG     r:DPTR, off:UINT, sel:UINT
-
-        enter_c
-
-; Load all registers from the registers structure
-
-        mov     ebx,[r]
-        mov     eax,[ebx+0]
-        mov     ecx,[ebx+8]
-        mov     edx,[ebx+12]
-        mov     esi,[ebx+16]
-        mov     edi,[ebx+20]
-        mov     ebx,[ebx+4]         ; Trashes BX structure pointer!
-
-; Call the VxD entry point (on stack)
-
-ifdef   USE_NASM
-        call far dword [off]
-else
-        call    [FCPTR off]
-endif
-
-; Save all registers back in the structure
-
-        push    ebx                 ; Push EBX onto stack for later
-        mov     ebx,[r]
-        mov     [ebx+0],eax
-        mov     [ebx+8],ecx
-        mov     [ebx+12],edx
-        mov     [ebx+16],esi
-        mov     [ebx+20],edi
-        pop     [DWORD ebx+4]       ; Save value of EBX from stack
-
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _pmdos
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm
deleted file mode 100644
index 5c741f346c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm
+++ /dev/null
@@ -1,1105 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: IBM PC Real mode and 16/32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              MSDOS interrupt handling.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _pmdos              ; Set up memory model
-
-; Define the size of our local stacks. For real mode code they cant be
-; that big, but for 32 bit protected mode code we can make them nice and
-; large so that complex C functions can be used.
-
-ifdef flatmodel
-MOUSE_STACK EQU 4096
-TIMER_STACK EQU 4096
-KEY_STACK   EQU 1024
-INT10_STACK EQU 1024
-IRQ_STACK   EQU 1024
-else
-MOUSE_STACK EQU 1024
-TIMER_STACK EQU 512
-KEY_STACK   EQU 256
-INT10_STACK EQU 256
-IRQ_STACK   EQU 256
-endif
-
-ifdef   USE_NASM
-
-; Macro to load DS and ES registers with correct value.
-
-%imacro   LOAD_DS 0
-%ifdef  flatmodel
-        mov     ds,[cs:_PM_savedDS]
-        mov     es,[cs:_PM_savedDS]
-%else
-        push    ax
-        mov     ax,_DATA
-        mov     ds,ax
-        pop     ax
-%endif
-%endmacro
-
-; Note that interrupts we disable interrupts during the following stack
-; %imacro for correct operation, but we do not enable them again. Normally
-; these %imacros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-%imacro NEWSTK  1
-        cli
-        mov     [seg_%1],ss
-        mov     [ptr_%1],_sp
-        mov     [TempSeg],ds
-        mov     ss,[TempSeg]
-        mov     _sp,offset %1
-%endmacro
-
-; %imacro to switch back to the old stack.
-
-%imacro   RESTSTK   1
-        cli
-        mov     ss,[seg_%1]
-        mov     _sp,[ptr_%1]
-%endmacro
-
-; %imacro to swap the current stack with the one saved away.
-
-%imacro SWAPSTK 1
-        cli
-        mov     ax,ss
-        xchg    ax,[seg_%1]
-        mov     ss,ax
-        xchg    _sp,[ptr_%1]
-%endmacro
-
-else
-
-; Macro to load DS and ES registers with correct value.
-
-MACRO   LOAD_DS
-ifdef   flatmodel
-        mov     ds,[cs:_PM_savedDS]
-        mov     es,[cs:_PM_savedDS]
-else
-        push    ax
-        mov     ax,_DATA
-        mov     ds,ax
-        pop     ax
-endif
-ENDM
-
-; Note that interrupts we disable interrupts during the following stack
-; macro for correct operation, but we do not enable them again. Normally
-; these macros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-MACRO   NEWSTK  stkname
-        cli
-        mov     [seg_&stkname&],ss
-        mov     [ptr_&stkname&],_sp
-        mov     [TempSeg],ds
-        mov     ss,[TempSeg]
-        mov     _sp,offset stkname
-ENDM
-
-; Macro to switch back to the old stack.
-
-MACRO   RESTSTK stkname
-        cli
-        mov     ss,[seg_&stkname&]
-        mov     _sp,[ptr_&stkname&]
-ENDM
-
-; Macro to swap the current stack with the one saved away.
-
-MACRO   SWAPSTK stkname
-        cli
-        mov     ax,ss
-        xchg    ax,[seg_&stkname&]
-        mov     ss,ax
-        xchg    _sp,[ptr_&stkname&]
-ENDM
-
-endif
-
-begdataseg  _pmdos
-
-ifdef flatmodel
-    cextern _PM_savedDS,USHORT
-endif
-    cextern _PM_critHandler,CPTR
-    cextern _PM_breakHandler,CPTR
-    cextern _PM_timerHandler,CPTR
-    cextern _PM_rtcHandler,CPTR
-    cextern _PM_keyHandler,CPTR
-    cextern _PM_key15Handler,CPTR
-    cextern _PM_mouseHandler,CPTR
-    cextern _PM_int10Handler,CPTR
-
-    cextern _PM_ctrlCPtr,DPTR
-    cextern _PM_ctrlBPtr,DPTR
-    cextern _PM_critPtr,DPTR
-
-    cextern _PM_prevTimer,FCPTR
-    cextern _PM_prevRTC,FCPTR
-    cextern _PM_prevKey,FCPTR
-    cextern _PM_prevKey15,FCPTR
-    cextern _PM_prevBreak,FCPTR
-    cextern _PM_prevCtrlC,FCPTR
-    cextern _PM_prevCritical,FCPTR
-    cextern _PM_prevRealTimer,ULONG
-    cextern _PM_prevRealRTC,ULONG
-    cextern _PM_prevRealKey,ULONG
-    cextern _PM_prevRealKey15,ULONG
-    cextern _PM_prevRealInt10,ULONG
-
-cpublic _PM_pmdosDataStart
-
-; Allocate space for all of the local stacks that we need. These stacks
-; are not very large, but should be large enough for most purposes
-; (generally you want to handle these interrupts quickly, simply storing
-; the information for later and then returning). If you need bigger
-; stacks then change the appropriate value in here.
-
-            ALIGN   4
-            dclb MOUSE_STACK    ; Space for local stack (small)
-MsStack:                        ; Stack starts at end!
-ptr_MsStack DUINT   0           ; Place to store old stack offset
-seg_MsStack dw      0           ; Place to store old stack segment
-
-            ALIGN   4
-            dclb INT10_STACK    ; Space for local stack (small)
-Int10Stack:                     ; Stack starts at end!
-ptr_Int10Stack  DUINT   0       ; Place to store old stack offset
-seg_Int10Stack  dw      0       ; Place to store old stack segment
-
-            ALIGN   4
-            dclb TIMER_STACK    ; Space for local stack (small)
-TmStack:                        ; Stack starts at end!
-ptr_TmStack DUINT   0           ; Place to store old stack offset
-seg_TmStack dw      0           ; Place to store old stack segment
-
-            ALIGN   4
-            dclb TIMER_STACK    ; Space for local stack (small)
-RtcStack:                       ; Stack starts at end!
-ptr_RtcStack DUINT  0           ; Place to store old stack offset
-seg_RtcStack dw     0           ; Place to store old stack segment
-RtcInside   dw      0           ; Are we still handling current interrupt
-
-            ALIGN   4
-            dclb KEY_STACK      ; Space for local stack (small)
-KyStack:                        ; Stack starts at end!
-ptr_KyStack DUINT   0           ; Place to store old stack offset
-seg_KyStack dw      0           ; Place to store old stack segment
-KyInside    dw      0           ; Are we still handling current interrupt
-
-            ALIGN   4
-            dclb KEY_STACK      ; Space for local stack (small)
-Ky15Stack:                      ; Stack starts at end!
-ptr_Ky15Stack   DUINT   0       ; Place to store old stack offset
-seg_Ky15Stack   dw      0       ; Place to store old stack segment
-
-TempSeg     dw      0           ; Place to store stack segment
-
-cpublic _PM_pmdosDataEnd
-
-enddataseg  _pmdos
-
-begcodeseg  _pmdos              ; Start of code segment
-
-cpublic _PM_pmdosCodeStart
-
-;----------------------------------------------------------------------------
-; PM_mouseISR - Mouse interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt subroutine called by the mouse driver upon interrupts, to
-; dispatch control to high level C based subroutines. Interrupts are on
-; when we call the user code.
-;
-; It is _extremely_ important to save the state of the extended registers
-; as these may well be trashed by the routines called from here and not
-; restored correctly by the mouse interface module.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. For mouse handlers this is not a
-;       problem, as the mouse driver arbitrates calls to the user mouse
-;       handler for us.
-;
-; Entry:    AX  - Condition mask giving reason for call
-;           BX  - Mouse button state
-;           CX  - Horizontal cursor coordinate
-;           DX  - Vertical cursor coordinate
-;           SI  - Horizontal mickey value
-;           DI  - Vertical mickey value
-;
-;----------------------------------------------------------------------------
-ifdef   DJGPP
-cprocstart  _PM_mouseISR
-else
-cprocfar    _PM_mouseISR
-endif
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-        NEWSTK  MsStack         ; Switch to local stack
-
-; Call the installed high level C code routine
-
-        clrhi   dx              ; Clear out high order values
-        clrhi   cx
-        clrhi   bx
-        clrhi   ax
-        sgnhi   si
-        sgnhi   di
-
-        push    _di
-        push    _si
-        push    _dx
-        push    _cx
-        push    _bx
-        push    _ax
-        sti                     ; Enable interrupts
-        call    [CPTR _PM_mouseHandler]
-        _add    sp,12,24
-
-        RESTSTK MsStack         ; Restore previous stack
-
-        popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        ret                     ; We are done!!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_timerISR - Timer interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible, since a timer overrun will simply hang the
-;       system.
-;----------------------------------------------------------------------------
-cprocfar    _PM_timerISR
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-
-        NEWSTK  TmStack         ; Switch to local stack
-        call    [CPTR _PM_timerHandler]
-        RESTSTK TmStack         ; Restore previous stack
-
-        popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevTimer - Chain to previous timer interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous timer interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_chainPrevTimer
-
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealTimer]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-        ret
-else
-        SWAPSTK TmStack         ; Swap back to previous stack
-        pushf                   ; Save state of interrupt flag
-        pushf                   ; Push flags on stack to simulate interrupt
-ifdef   USE_NASM
-        call far dword [_PM_prevTimer]
-else
-        call    [_PM_prevTimer]
-endif
-        popf                    ; Restore state of interrupt flag
-        SWAPSTK TmStack         ; Swap back to C stack again
-        ret
-endif
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible, since a timer overrun will simply hang the
-;       system.
-;----------------------------------------------------------------------------
-cprocfar    _PM_rtcISR
-
-        push    ds                  ; Save value of DS
-        push    es
-        pushad                      ; Save _all_ extended registers
-        cld                         ; Clear direction flag
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
-        mov     al,20h
-        out     0A0h,al
-        out     020h,al
-
-; Clear real-time clock timeout
-
-        in      al,70h              ; Read CMOS index register
-        push    _ax                 ;  and save for later
-        IODELAYN 3
-        mov     al,0Ch
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-
-; Call the C interrupt handler function
-
-        LOAD_DS                     ; Load DS register
-        cmp     [BYTE RtcInside],1  ; Check for mutual exclusion
-        je      @@Exit
-        mov     [BYTE RtcInside],1
-        NEWSTK  RtcStack            ; Switch to local stack
-        sti                         ; Re-enable interrupts
-        call    [CPTR _PM_rtcHandler]
-        RESTSTK RtcStack            ; Restore previous stack
-        mov     [BYTE RtcInside],0
-
-@@Exit: pop     _ax
-        out     70h,al              ; Restore CMOS index register
-        popad                       ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                        ; Return from interrupt
-
-cprocend
-
-ifdef flatmodel
-;----------------------------------------------------------------------------
-; PM_irqISRTemplate - Hardware interrupt handler IRQ template
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for any interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible.
-;----------------------------------------------------------------------------
-cprocfar    _PM_irqISRTemplate
-
-        push    ebx
-        mov     ebx,0           ; Relocation adjustment factor
-        jmp     __IRQEntry
-
-; Global variables stored in the IRQ thunk code segment
-
-_CHandler       dd      0       ; Pointer to C interrupt handler
-_PrevIRQ        dd      0       ; Previous IRQ handler
-                dd      0
-_IRQ            dd      0       ; IRQ we are hooked for
-ptr_IRQStack    DUINT   0       ; Place to store old stack offset
-seg_IRQStack    dw      0       ; Place to store old stack segment
-_Inside         db      0       ; Mutual exclusion flag
-        ALIGN   4
-        dclb IRQ_STACK          ; Space for local stack
-_IRQStack:                      ; Stack starts at end!
-
-; Check for and reject spurious IRQ 7 signals
-
-__IRQEntry:
-        cmp     [BYTE cs:ebx+_IRQ],7    ; Spurious IRQs occur only on IRQ 7
-        jmp     @@ValidIRQ
-        push    eax
-        mov     al,1011b            ; OCW3: read ISR
-        out     20h,al              ; (Intel Peripheral Components, 1991,
-        in      al,20h              ; p. 3-188)
-        shl     al,1                ; Set C = bit 7 (IRQ 7) of ISR register
-        pop     eax
-        jc      @@ValidIRQ
-        iret                        ; Return from interrupt
-
-; Save all registers for duration of IRQ handler
-
-@@ValidIRQ:
-        push    ds                  ; Save value of DS
-        push    es
-        pushad                      ; Save _all_ extended registers
-        cld                         ; Clear direction flag
-        LOAD_DS                     ; Load DS register
-
-; Send an EOI to the PIC
-
-        mov     al,20h              ; Send EOI to PIC
-        cmp     [BYTE ebx+_IRQ],8   ; Clear PIC1 first if IRQ >= 8
-        jb      @@1
-        out     0A0h,al
-@@1:    out     20h,al
-
-; Check for mutual exclusion
-
-        cmp     [BYTE ebx+_Inside],1
-        je      @@ChainOldHandler
-        mov     [BYTE ebx+_Inside],1
-
-; Call the C interrupt handler function
-
-        mov     [ebx+seg_IRQStack],ss   ; Switch to local stack
-        mov     [ebx+ptr_IRQStack],esp
-        mov     [TempSeg],ds
-        mov     ss,[TempSeg]
-        lea     esp,[ebx+_IRQStack]
-        sti                             ; Re-enable interrupts
-        push    ebx
-        call    [DWORD ebx+_CHandler]
-        pop     ebx
-        cli
-        mov     ss,[ebx+seg_IRQStack]   ; Restore previous stack
-        mov     esp,[ebx+ptr_IRQStack]
-        or      eax,eax
-        jz      @@ChainOldHandler   ; Chain if not handled for shared IRQ
-
-@@Exit: mov     [BYTE ebx+_Inside],0
-        popad                       ; Restore all extended registers
-        pop     es
-        pop     ds
-        pop     ebx
-        iret                        ; Return from interrupt
-
-@@ChainOldHandler:
-        cmp     [DWORD ebx+_PrevIRQ],0
-        jz      @@Exit
-        mov     [BYTE ebx+_Inside],0
-        mov     eax,[DWORD ebx+_PrevIRQ]
-        mov     ebx,[DWORD ebx+_PrevIRQ+4]
-        mov     [DWORD _PrevIRQ],eax
-        mov     [DWORD _PrevIRQ+4],ebx
-        popad                       ; Restore all extended registers
-        pop     es
-        pop     ds
-        pop     ebx
-        jmp     [cs:_PrevIRQ]       ; Chain to previous IRQ handler
-
-cprocend
-cpublic _PM_irqISRTemplateEnd
-endif
-
-;----------------------------------------------------------------------------
-; PM_keyISR - keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the keyboard interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. However we ensure within this routine
-;       mutual exclusion to the keyboard handling routine.
-;----------------------------------------------------------------------------
-cprocfar    _PM_keyISR
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-
-        cmp     [BYTE KyInside],1   ; Check for mutual exclusion
-        je      @@Reissued
-
-        mov     [BYTE KyInside],1
-        NEWSTK  KyStack         ; Switch to local stack
-        call    [CPTR _PM_keyHandler]   ; Call C code
-        RESTSTK KyStack         ; Restore previous stack
-        mov     [BYTE KyInside],0
-
-@@Exit: popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-; When the BIOS keyboard handler needs to change the SHIFT status lights
-; on the keyboard, in the process of doing this the keyboard controller
-; re-issues another interrupt, while the current handler is still executing.
-; If we recieve another interrupt while still handling the current one,
-; then simply chain directly to the previous handler.
-;
-; Note that for most DOS extenders, the real mode interrupt handler that we
-; install takes care of this for us.
-
-@@Reissued:
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-else
-        pushf
-ifdef   USE_NASM
-        call far dword [_PM_prevKey]
-else
-        call    [_PM_prevKey]
-endif
-endif
-        jmp     @@Exit
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevkey - Chain to previous key interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous key interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_chainPrevKey
-
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-        ret
-else
-
-; YIKES! For some strange reason, when execution returns from the
-; previous keyboard handler, interrupts are re-enabled!! Since we expect
-; interrupts to remain off during the duration of our handler, this can
-; cause havoc. However our stack macros always turn off interrupts, so they
-; will be off when we exit this routine. Obviously there is a tiny weeny
-; window when interrupts will be enabled, but there is nothing we can
-; do about this.
-
-        SWAPSTK KyStack         ; Swap back to previous stack
-        pushf                   ; Push flags on stack to simulate interrupt
-ifdef   USE_NASM
-        call far dword [_PM_prevKey]
-else
-        call    [_PM_prevKey]
-endif
-        SWAPSTK KyStack         ; Swap back to C stack again
-        ret
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_key15ISR - Int 15h keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; This routine gets called if we have been called to handle the Int 15h
-; keyboard interrupt callout from real mode.
-;
-;   Entry:  AX  - Hardware scan code to process
-;   Exit:   AX  - Hardware scan code to process (0 to ignore)
-;----------------------------------------------------------------------------
-cprocfar    _PM_key15ISR
-
-        push    ds
-        push    es
-        LOAD_DS
-        cmp     ah,4Fh
-        jnz     @@NotOurs       ; Quit if not keyboard callout
-
-        pushad
-        cld                     ; Clear direction flag
-        xor     ah,ah           ; AX := scan code
-        NEWSTK  Ky15Stack       ; Switch to local stack
-        push    _ax
-        call    [CPTR _PM_key15Handler] ; Call C code
-        _add    sp,2,4
-        RESTSTK Ky15Stack       ; Restore previous stack
-        test    ax,ax
-        jz      @@1
-        stc                     ; Set carry to process as normal
-        jmp     @@2
-@@1:    clc                     ; Clear carry to ignore scan code
-@@2:    popad
-        jmp     @@Exit          ; We are done
-
-@@NotOurs:
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey15]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-else
-        pushf
-ifdef   USE_NASM
-        call far dword [_PM_prevKey15]
-else
-        call    [_PM_prevKey15]
-endif
-endif
-@@Exit: pop     es
-        pop     ds
-ifdef flatmodel
-        retf    4
-else
-        retf    2
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_breakISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-Break interrupt. We simply set
-; the Ctrl-Break flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar    _PM_breakISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx
-
-        LOAD_DS                 ; Load DS register
-ifdef flatmodel
-        mov     ebx,[_PM_ctrlBPtr]
-else
-        les     bx,[_PM_ctrlBPtr]
-endif
-        mov     [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
-        cmp     [CPTR _PM_breakHandler],0
-        je      @@Exit
-
-        pushad
-        mov     _ax,1
-        push    _ax
-        call    [CPTR _PM_breakHandler] ; Call C code
-        pop     _ax
-        popad
-
-@@Exit: pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlBreakHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-Break flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart  PM_ctrlBreakHit
-
-        ARG     clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-ifdef flatmodel
-        mov     ebx,[_PM_ctrlBPtr]
-else
-        les     bx,[_PM_ctrlBPtr]
-endif
-        cli                     ; No interrupts thanks!
-        mov     _ax,[_ES _bx]
-        test    [BYTE clearFlag],1
-        jz      @@Done
-        mov     [UINT _ES _bx],0
-
-@@Done: pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_ctrlCISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-C interrupt. We simply set
-; the Ctrl-C flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar    _PM_ctrlCISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx
-
-        LOAD_DS                 ; Load DS register
-ifdef flatmodel
-        mov     ebx,[_PM_ctrlCPtr]
-else
-        les     bx,[_PM_ctrlCPtr]
-endif
-        mov     [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
-        cmp     [CPTR _PM_breakHandler],0
-        je      @@Exit
-
-        pushad
-        mov     _ax,0
-        push    _ax
-        call    [CPTR _PM_breakHandler] ; Call C code
-        pop     _ax
-        popad
-
-@@Exit: pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-        iretd
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlCHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-C flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart  PM_ctrlCHit
-
-        ARG     clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-ifdef flatmodel
-        mov     ebx,[_PM_ctrlCPtr]
-else
-        les     bx,[_PM_ctrlCPtr]
-endif
-        cli                     ; No interrupts thanks!
-        mov     _ax,[_ES _bx]
-        test    [BYTE clearFlag],1
-        jz      @@Done
-        mov     [UINT _ES _bx],0
-
-@@Done:
-        pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_criticalISR - Control Error handler interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt handler for the MSDOS Critical Error interrupt, to dispatch
-; control to high level C based subroutines. We save the state of all
-; registers in this routine, and switch to a local stack. We also pass
-; the values of the AX and DI registers to the as pointers, so that the
-; values can be modified before returning to MSDOS.
-;----------------------------------------------------------------------------
-cprocfar    _PM_criticalISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx             ; Save register values changed
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-ifdef flatmodel
-        mov     ebx,[_PM_critPtr]
-else
-        les     bx,[_PM_critPtr]
-endif
-        mov     [_ES _bx],ax
-        mov     [_ES _bx+2],di
-
-; Run alternate critical handler code if installed
-
-        cmp     [CPTR _PM_critHandler],0
-        je      @@NoAltHandler
-
-        pushad
-        push    _di
-        push    _ax
-        call    [CPTR _PM_critHandler]  ; Call C code
-        _add    sp,4,8
-        popad
-
-        pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-@@NoAltHandler:
-        mov     ax,3            ; Tell MSDOS to fail the operation
-        pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_criticalError(int *axVal,int *diVal,int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the critical error flags, and the values that
-; MSDOS passed in the AX and DI registers to our handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_criticalError
-
-        ARG     axVal:DPTR, diVal:DPTR, clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-ifdef flatmodel
-        mov     ebx,[_PM_critPtr]
-else
-        les     bx,[_PM_critPtr]
-endif
-        cli                     ; No interrupts thanks!
-        xor     _ax,_ax
-        xor     _di,_di
-        mov     ax,[_ES _bx]
-        mov     di,[_ES _bx+2]
-        test    [BYTE clearFlag],1
-        jz      @@NoClear
-        mov     [ULONG _ES _bx],0
-@@NoClear:
-        _les    _bx,[axVal]
-        mov     [_ES _bx],_ax
-        _les    _bx,[diVal]
-        mov     [_ES _bx],_di
-        pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setMouseHandler(int mask, PM_mouseHandler mh)
-;----------------------------------------------------------------------------
-cprocstart  _PM_setMouseHandler
-
-        ARG     mouseMask:UINT
-
-        enter_c
-        push    es
-
-        mov     ax,0Ch          ; AX := Function 12 - install interrupt sub
-        mov     _cx,[mouseMask] ; CX := mouse mask
-        mov     _dx,offset _PM_mouseISR
-        push    cs
-        pop     es              ; ES:_DX -> mouse handler
-        int     33h             ; Call mouse driver
-
-        pop     es
-        leave_c
-        ret
-
-cprocend
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; void PM_mousePMCB(void)
-;----------------------------------------------------------------------------
-; Mouse realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-;   Entry:  DS:_SI  -> Real mode stack at time of call
-;           ES:_DI  -> Real mode register data structure
-;           SS:_SP  -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar    _PM_mousePMCB
-
-        pushad
-        mov     eax,[es:_di+1Ch]    ; Load register values from real mode
-        mov     ebx,[es:_di+10h]
-        mov     ecx,[es:_di+18h]
-        mov     edx,[es:_di+14h]
-        mov     esi,[es:_di+04h]
-        mov     edi,[es:_di]
-        call    _PM_mouseISR        ; Call the mouse handler
-        popad
-
-        mov     ax,[ds:_si]
-        mov     [es:_di+2Ah],ax     ; Plug in return IP address
-        mov     ax,[ds:_si+2]
-        mov     [es:_di+2Ch],ax     ; Plug in return CS value
-        add     [WORD es:_di+2Eh],4 ; Remove return address from stack
-        iret                        ; Go back to real mode!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_int10PMCB(void)
-;----------------------------------------------------------------------------
-; int10 realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-;   Entry:  DS:ESI  -> Real mode stack at time of call
-;           ES:EDI  -> Real mode register data structure
-;           SS:ESP  -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar        _PM_int10PMCB
-
-        pushad
-        push    ds
-        push    es
-        push    fs
-
-        pushfd
-        pop     eax
-        mov     [es:edi+20h],ax     ; Save return flag status
-        mov     ax,[ds:esi]
-        mov     [es:edi+2Ah],ax     ; Plug in return IP address
-        mov     ax,[ds:esi+2]
-        mov     [es:edi+2Ch],ax     ; Plug in return CS value
-        add     [WORD es:edi+2Eh],4 ; Remove return address from stack
-
-; Call the install int10 handler in protected mode. This function gets called
-; with DS set to the current data selector, and ES:EDI pointing the the
-; real mode DPMI register structure at the time of the interrupt. The
-; handle must be written in assembler to be able to extract the real mode
-; register values from the structure
-
-        push    es
-        pop     fs                  ; FS:EDI -> real mode registers
-        LOAD_DS
-        NEWSTK  Int10Stack          ; Switch to local stack
-
-        call    [_PM_int10Handler]
-
-        RESTSTK Int10Stack          ; Restore previous stack
-        pop     fs
-        pop     es
-        pop     ds
-        popad
-        iret                        ; Go back to real mode!
-
-cprocend
-
-endif
-
-cpublic _PM_pmdosCodeEnd
-
-endcodeseg  _pmdos
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm
deleted file mode 100644
index 34985a9d8b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm
+++ /dev/null
@@ -1,652 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;*            Based on original code Copyright 1994 Otto Chrons
-;*
-;* Language:    80386 Assembler, TASM 4.0 or later
-;* Environment: IBM PC 32 bit protected mode
-;*
-;* Description: Low level page fault handler for virtual linear framebuffers.
-;*
-;****************************************************************************
-
-        IDEAL
-        JUMPS
-
-include "scitech.mac"           ; Memory model macros
-
-header      _vflat              ; Set up memory model
-
-VFLAT_START     EQU 0F0000000h
-VFLAT_END       EQU 0F03FFFFFh
-PAGE_PRESENT    EQU 1
-PAGE_NOTPRESENT EQU 0
-PAGE_READ       EQU 0
-PAGE_WRITE      EQU 2
-
-ifdef   DOS4GW
-
-;----------------------------------------------------------------------------
-; DOS4G/W flat linear framebuffer emulation.
-;----------------------------------------------------------------------------
-
-begdataseg  _vflat
-
-; Near pointers to the page directory base and our page tables. All of
-; this memory is always located in the first Mb of DOS memory.
-
-PDBR            dd  0               ; Page directory base register (CR3)
-accessPageAddr  dd  0
-accessPageTable dd  0
-
-; CauseWay page directory & 1st page table linear addresses.
-
-CauseWayDIRLinear dd 0
-CauseWay1stLinear dd 0
-
-; Place to store a copy of the original Page Table Directory before we
-; intialised our virtual buffer code.
-
-pageDirectory:  resd 1024           ; Saved page table directory
-
-ValidCS         dw  0               ; Valid CS for page faults
-Ring0CS         dw  0               ; Our ring 0 code selector
-LastPage        dd  0               ; Last page we mapped in
-BankFuncBuf:    resb 101            ; Place to store bank switch code
-BankFuncPtr     dd  offset BankFuncBuf
-
-INT14Gate:
-INT14Offset     dd      0           ; eip of original vector
-INT14Selector   dw      0           ; cs of original vector
-
-        cextern _PM_savedDS,USHORT
-        cextern VF_haveCauseWay,BOOL
-
-enddataseg  _vflat
-
-begcodeseg  _vflat              ; Start of code segment
-
-        cextern VF_malloc,FPTR
-
-;----------------------------------------------------------------------------
-; PF_handler64k - Page fault handler for 64k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler.  It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here.  If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction.  If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar    PF_handler64k
-
-; Check if this is a processor exeception or a page fault
-
-        push    eax
-        mov     ax,[cs:ValidCS]     ; Use CS override to access data
-        cmp     [ss:esp+12],ax      ; Is this a page fault?
-        jne     @@ToOldHandler      ; Nope, jump to the previous handler
-
-; Get address of page fault and check if within our handlers range
-
-        mov     eax,cr2             ; EBX has page fault linear address
-        cmp     eax,VFLAT_START     ; Is the fault less than ours?
-        jb      @@ToOldHandler      ; Yep, go to previous handler
-        cmp     eax,VFLAT_END       ; Is the fault more than ours?
-        jae     @@ToOldHandler      ; Yep, go to previous handler
-
-; This is our page fault, so we need to handle it
-
-        pushad
-        push    ds
-        push    es
-        mov     ebx,eax             ; EBX := page fault address
-        and     ebx,invert 0FFFFh   ; Mask to 64k bank boundary
-        mov     ds,[cs:_PM_savedDS]; Load segment registers
-        mov     es,[cs:_PM_savedDS]
-
-; Map in the page table for our virtual framebuffer area for modification
-
-        mov     edi,[PDBR]          ; EDI points to page directory
-        mov     edx,ebx             ; EDX = linear address
-        shr     edx,22              ; EDX = offset to page directory
-        mov     edx,[edx*4+edi]     ; EDX = physical page table address
-        mov     eax,edx
-        mov     edx,[accessPageTable]
-        or      eax,7
-        mov     [edx],eax
-        mov     eax,cr3
-        mov     cr3,eax             ; Update page table cache
-
-; Mark all pages valid for the new page fault area
-
-        mov     esi,ebx             ; ESI := linear address for page
-        shr     esi,10
-        and     esi,0FFFh           ; Offset into page table
-        add     esi,[accessPageAddr]
-ifdef   USE_NASM
-%assign off 0
-%rep 16
-        or      [DWORD esi+off],0000000001h ; Enable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT    16
-        or      [DWORD esi+off],0000000001h ; Enable pages
-off = off+4
-ENDM
-endif
-
-; Mark all pages invalid for the previously mapped area
-
-        xchg    esi,[LastPage]      ; Save last page for next page fault
-        test    esi,esi
-        jz      @@DoneMapping       ; Dont update if first time round
-ifdef   USE_NASM
-%assign off 0
-%rep 16
-        or      [DWORD esi+off],0FFFFFFFEh  ; Disable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT    16
-        and     [DWORD esi+off],0FFFFFFFEh  ; Disable pages
-off = off+4
-ENDM
-endif
-
-@@DoneMapping:
-        mov     eax,cr3
-        mov     cr3,eax             ; Flush the TLB
-
-; Now program the new SuperVGA starting bank address
-
-        mov     eax,ebx             ; EAX := page fault address
-        shr     eax,16
-        and     eax,0FFh            ; Mask to 0-255
-        call    [BankFuncPtr]       ; Call the bank switch function
-
-        pop     es
-        pop     ds
-        popad
-        pop     eax
-        add     esp,4               ; Pop the error code from stack
-        iretd                       ; Return to faulting instruction
-
-@@ToOldHandler:
-        pop     eax
-ifdef   USE_NASM
-        jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
-        jmp     [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PF_handler4k  - Page fault handler for 4k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler.  It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here.  If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction.  If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar    PF_handler4k
-
-; Fill in when we have tested all the 64Kb code
-
-ifdef   USE_NASM
-        jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
-        jmp     [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallFaultHandler(void *baseAddr,int bankSize)
-;----------------------------------------------------------------------------
-; Installes the page fault handler directly int the interrupt descriptor
-; table for maximum performance. This of course requires ring 0 access,
-; but none of this stuff will run without ring 0!
-;----------------------------------------------------------------------------
-cprocstart  InstallFaultHandler
-
-        ARG     baseAddr:ULONG, bankSize:UINT
-
-        enter_c
-
-        mov     [DWORD LastPage],0  ; No pages have been mapped
-        mov     ax,cs
-        mov     [ValidCS],ax        ; Save CS value for page faults
-
-; Put address of our page fault handler into the IDT directly
-
-        sub     esp,6               ; Allocate space on stack
-ifdef   USE_NASM
-        sidt    [ss:esp]            ; Store pointer to IDT
-else
-        sidt    [FWORD ss:esp]      ; Store pointer to IDT
-endif
-        pop     ax                  ; add esp,2
-        pop     eax                 ; Absolute address of IDT
-        add     eax,14*8            ; Point to Int #14
-
-; Note that Interrupt gates do not have the high and low word of the
-; offset in adjacent words in memory, there are 4 bytes separating them.
-
-        mov     ecx,[eax]           ; Get cs and low 16 bits of offset
-        mov     edx,[eax+6]         ; Get high 16 bits of offset in dx
-        shl     edx,16
-        mov     dx,cx               ; edx has offset
-        mov     [INT14Offset],edx   ; Save offset
-        shr     ecx,16
-        mov     [INT14Selector],cx  ; Save original cs
-        mov     [eax+2],cs          ; Install new cs
-        mov     edx,offset PF_handler64k
-        cmp     [UINT bankSize],4
-        jne     @@1
-        mov     edx,offset PF_handler4k
-@@1:    mov     [eax],dx            ; Install low word of offset
-        shr     edx,16
-        mov     [eax+6],dx          ; Install high word of offset
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void RemoveFaultHandler(void)
-;----------------------------------------------------------------------------
-; Closes down the virtual framebuffer services and restores the previous
-; page fault handler.
-;----------------------------------------------------------------------------
-cprocstart  RemoveFaultHandler
-
-        enter_c
-
-; Remove page fault handler from IDT
-
-        sub     esp,6               ; Allocate space on stack
-ifdef   USE_NASM
-        sidt    [ss:esp]            ; Store pointer to IDT
-else
-        sidt    [FWORD ss:esp]      ; Store pointer to IDT
-endif
-
-        pop     ax                  ; add esp,2
-        pop     eax                 ; Absolute address of IDT
-        add     eax,14*8            ; Point to Int #14
-        mov     cx,[INT14Selector]
-        mov     [eax+2],cx          ; Restore original CS
-        mov     edx,[INT14Offset]
-        mov     [eax],dx            ; Install low word of offset
-        shr     edx,16
-        mov     [eax+6],dx          ; Install high word of offset
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallBankFunc(int codeLen,void *bankFunc)
-;----------------------------------------------------------------------------
-; Installs the bank switch function by relocating it into our data segment
-; and making it into a callable function. We do it this way to make the
-; code identical to the way that the VflatD devices work under Windows.
-;----------------------------------------------------------------------------
-cprocstart  InstallBankFunc
-
-        ARG     codeLen:UINT, bankFunc:DPTR
-
-        enter_c
-
-        mov     esi,[bankFunc]      ; Copy the code into buffer
-        mov     edi,offset BankFuncBuf
-        mov     ecx,[codeLen]
-    rep movsb
-        mov     [BYTE edi],0C3h     ; Terminate the function with a near ret
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int InitPaging(void)
-;----------------------------------------------------------------------------
-; Initializes paging system. If paging is not enabled, builds a page table
-; directory and page tables for physical memory
-;
-;   Exit:       0   - Successful
-;               -1  - Couldn't initialize paging mechanism
-;----------------------------------------------------------------------------
-cprocstart  InitPaging
-
-        push    ebx
-        push    ecx
-        push    edx
-        push    esi
-        push    edi
-
-; Are we running under CauseWay?
-
-        mov     ax,0FFF9h
-        int     31h
-        jc      @@NotCauseway
-        cmp     ecx,"CAUS"
-        jnz     @@NotCauseway
-        cmp     edx,"EWAY"
-        jnz     @@NotCauseway
-
-        mov     [BOOL VF_haveCauseWay],1
-        mov     [CauseWayDIRLinear],esi
-        mov     [CauseWay1stLinear],edi
-
-; Check for DPMI
-
-        mov     ax,0ff00h
-        push    es
-        int     31h
-        pop     es
-        shr     edi,2
-        and     edi,3
-        cmp     edi,2
-        jz      @@ErrExit               ; Not supported under DPMI
-
-        mov     eax,[CauseWayDIRLinear]
-        jmp     @@CopyCR3
-
-@@NotCauseway:
-        mov     ax,cs
-        test    ax,3                    ; Which ring are we running
-        jnz     @@ErrExit               ; Needs zero ring to access
-                                        ; page tables (CR3)
-        mov     eax,cr0                 ; Load CR0
-        test    eax,80000000h           ; Is paging enabled?
-        jz      @@ErrExit               ; No, we must have paging!
-
-        mov     eax,cr3                 ; Load directory address
-        and     eax,0FFFFF000h
-
-@@CopyCR3:
-        mov     [PDBR],eax              ; Save it
-        mov     esi,eax
-        mov     edi,offset pageDirectory
-        mov     ecx,1024
-        cld
-        rep     movsd                   ; Copy the original page table directory
-        cmp     [DWORD accessPageAddr],0; Check if we have allocated page
-        jne     @@HaveRealMem           ; table already (we cant free it)
-
-        mov     eax,0100h               ; DPMI DOS allocate
-        mov     ebx,8192/16
-        int     31h                     ; Allocate 8192 bytes
-        and     eax,0FFFFh
-        shl     eax,4                   ; EAX points to newly allocated memory
-        add     eax,4095
-        and     eax,0FFFFF000h          ; Page align
-        mov     [accessPageAddr],eax
-
-@@HaveRealMem:
-        mov     eax,[accessPageAddr]    ; EAX -> page table in 1st Mb
-        shr     eax,12
-        and     eax,3FFh                ; Page table offset
-        shl     eax,2
-        cmp     [BOOL VF_haveCauseWay],0
-        jz      @@NotCW0
-        mov     ebx,[CauseWay1stLinear]
-        jmp     @@Put1st
-
-@@NotCW0:
-        mov     ebx,[PDBR]
-        mov     ebx,[ebx]
-        and     ebx,0FFFFF000h          ; Page table for 1st megabyte
-
-@@Put1st:
-        add     eax,ebx
-        mov     [accessPageTable],eax
-        sub     eax,eax                 ; No error
-        jmp     @@Exit
-
-@@ErrExit:
-        mov     eax,-1
-
-@@Exit: pop     edi
-        pop     esi
-        pop     edx
-        pop     ecx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void ClosePaging(void)
-;----------------------------------------------------------------------------
-; Closes the paging system
-;----------------------------------------------------------------------------
-cprocstart  ClosePaging
-
-        push    eax
-        push    ecx
-        push    edx
-        push    esi
-        push    edi
-
-        mov     eax,[accessPageAddr]
-        call    AccessPage              ; Restore AccessPage mapping
-        mov     edi,[PDBR]
-        mov     esi,offset pageDirectory
-        mov     ecx,1024
-        cld
-        rep     movsd                   ; Restore the original page table directory
-
-@@Exit: pop     edi
-        pop     esi
-        pop     edx
-        pop     ecx
-        pop     eax
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long AccessPage(long phys)
-;----------------------------------------------------------------------------
-; Maps a known page to given physical memory
-;   Entry:      EAX - Physical memory
-;   Exit:       EAX - Linear memory address of mapped phys mem
-;----------------------------------------------------------------------------
-cprocstatic     AccessPage
-
-        push    edx
-        mov     edx,[accessPageTable]
-        or      eax,7
-        mov     [edx],eax
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-        mov     eax,[accessPageAddr]
-        pop     edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long GetPhysicalAddress(long linear)
-;----------------------------------------------------------------------------
-; Returns the physical address of linear address
-;   Entry:      EAX - Linear address to convert
-;   Exit:       EAX - Physical address
-;----------------------------------------------------------------------------
-cprocstatic     GetPhysicalAddress
-
-        push    ebx
-        push    edx
-        mov     edx,eax
-        shr     edx,22                  ; EDX is the directory offset
-        mov     ebx,[PDBR]
-        mov     edx,[edx*4+ebx]         ; Load page table address
-        push    eax
-        mov     eax,edx
-        call    AccessPage              ; Access the page table
-        mov     edx,eax
-        pop     eax
-        shr     eax,12
-        and     eax,03FFh               ; EAX offset into page table
-        mov     eax,[edx+eax*4]         ; Load physical address
-        and     eax,0FFFFF000h
-        pop     edx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void CreatePageTable(long pageDEntry)
-;----------------------------------------------------------------------------
-; Creates a page table for specific address (4MB)
-;       Entry:  EAX - Page directory entry (top 10-bits of address)
-;----------------------------------------------------------------------------
-cprocstatic     CreatePageTable
-
-        push    ebx
-        push    ecx
-        push    edx
-        push    edi
-        mov     ebx,eax                 ; Save address
-        mov     eax,8192
-        push    eax
-        call    VF_malloc              ; Allocate page table directory
-        add     esp,4
-        add     eax,0FFFh
-        and     eax,0FFFFF000h          ; Page align (4KB)
-        mov     edi,eax                 ; Save page table linear address
-        sub     eax,eax                 ; Fill with zero
-        mov     ecx,1024
-        cld
-        rep     stosd                   ; Clear page table
-        sub     edi,4096
-        mov     eax,edi
-        call    GetPhysicalAddress
-        mov     edx,[PDBR]
-        or      eax,7                   ; Present/write/user bit
-        mov     [edx+ebx*4],eax         ; Save physical address into page directory
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-        pop     edi
-        pop     edx
-        pop     ecx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-;----------------------------------------------------------------------------
-; Maps physical memory into linear memory
-;   Entry:      pAddr   - Physical address
-;               lAddr   - Linear address
-;               pages   - Number of 4K pages to map
-;               flags   - Page flags
-;                           bit 0   =       present
-;                           bit 1   =       Read(0)/Write(1)
-;----------------------------------------------------------------------------
-cprocstart  MapPhysical2Linear
-
-        ARG     pAddr:ULONG, lAddr:ULONG, pages:UINT, pflags:UINT
-
-        enter_c
-
-        and     [ULONG pAddr],0FFFFF000h; Page boundary
-        and     [ULONG lAddr],0FFFFF000h; Page boundary
-        mov     ecx,[pflags]
-        and     ecx,11b                 ; Just two bits
-        or      ecx,100b                ; Supervisor bit
-        mov     [pflags],ecx
-
-        mov     edx,[lAddr]
-        shr     edx,22                  ; EDX = Directory
-        mov     esi,[PDBR]
-        mov     edi,[pages]             ; EDI page count
-        mov     ebx,[lAddr]
-
-@@CreateLoop:
-        mov     ecx,[esi+edx*4]         ; Load page table address
-        test    ecx,1                   ; Is it present?
-        jnz     @@TableOK
-        mov     eax,edx
-        call    CreatePageTable         ; Create a page table
-@@TableOK:
-        mov     eax,ebx
-        shr     eax,12
-        and     eax,3FFh
-        sub     eax,1024
-        neg     eax                     ; EAX = page count in this table
-        inc     edx                     ; Next table
-        mov     ebx,0                   ; Next time we'll map 1K pages
-        sub     edi,eax                 ; Subtract mapped pages from page count
-        jns     @@CreateLoop            ; Create more tables if necessary
-
-        mov     ecx,[pages]             ; ECX = Page count
-        mov     esi,[lAddr]
-        shr     esi,12                  ; Offset part isn't needed
-        mov     edi,[pAddr]
-@@MappingLoop:
-        mov     eax,esi
-        shr     eax,10                  ; EAX = offset to page directory
-        mov     ebx,[PDBR]
-        mov     eax,[eax*4+ebx]         ; EAX = page table address
-        call    AccessPage
-        mov     ebx,esi
-        and     ebx,3FFh                ; EBX = offset to page table
-        mov     edx,edi
-        add     edi,4096                ; Next physical address
-        inc     esi                     ; Next linear page
-        or      edx,[pflags]            ; Update flags...
-        mov     [eax+ebx*4],edx         ; Store page table entry
-        loop    @@MappingLoop
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _vflat
-
-endif
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c
deleted file mode 100644
index ee117c78e9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  DOS
-*
-* Description:  MSDOS specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External timing function */
-
-void __ZTimerInit(void);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define SetMaxThreadPriority()      0
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define RestoreThreadPriority(i)    (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    ulong   resolution;
-
-    __ZTimerInit();
-    ULZTimerResolution(&resolution);
-    freq->low = (ulong)(10000000000.0 / resolution);
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                   \
-{                                       \
-    (t)->low = ULZReadTime() * 10000L;  \
-    (t)->high = 0;                      \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/event.c b/board/MAI/bios_emulator/scitech/src/pm/dos/event.c
deleted file mode 100644
index a969d111b4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/event.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit DOS
-*
-* Description:  32-bit DOS implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool _VARAPI   _EVT_useEvents = true;  /* True to use event handling   */
-ibool _VARAPI   _EVT_installed = 0;     /* Event handers installed?     */
-uchar _VARAPI   *_EVT_biosPtr = NULL;   /* Pointer to the BIOS data area */
-static ibool    haveMouse = false;      /* True if we have a mouse      */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* External assembler functions */
-
-void    EVTAPI _EVT_pollJoystick(void);
-uint    EVTAPI _EVT_disableInt(void);
-uint    EVTAPI _EVT_restoreInt(uint flags);
-void    EVTAPI _EVT_codeStart(void);
-void    EVTAPI _EVT_codeEnd(void);
-void    EVTAPI _EVT_cCodeStart(void);
-void    EVTAPI _EVT_cCodeEnd(void);
-int     EVTAPI _EVT_getKeyCode(void);
-void    EVTAPI _EVT_pumpMessages(void);
-int     EVTAPI EVT_rdinx(int port,int index);
-void    EVTAPI EVT_wrinx(int port,int index,int value);
-
-#ifdef NO_KEYBOARD_INTERRUPT
-/****************************************************************************
-REMARKS:
-This function is used to pump all keyboard messages from the BIOS keyboard
-handler into our event queue. This can be used to avoid using the
-installable keyboard handler if this is causing problems.
-****************************************************************************/
-static void EVTAPI _EVT_pumpMessages(void)
-{
-    RMREGS  regs;
-	uint    key,ps;
-
-	/* Since the keyboard ISR has not been installed if NO_IDE_BUG has
-	 * been defined, we first check for any pending keyboard events
-	 * here, and if there are some insert them into the event queue to
-	 * be picked up later - what a kludge.
-	 */
-	while ((key = _EVT_getKeyCode()) != 0) {
-		ps = _EVT_disableInt();
-		addKeyEvent(EVT_KEYDOWN, key);
-		_EVT_restoreInt(ps);
-		}
-
-    regs.x.ax = 0x0B;           /* Reset Move Mouse */
-    PM_int86(0x33,&regs,&regs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    return (ulong)PM_getLong(_EVT_biosPtr+0x6C) * 55UL;
-}
-
-/****************************************************************************
-REMARKS:
-Reboots the machine from DOS (warm boot)
-****************************************************************************/
-static void Reboot(void)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    ushort *rebootType = PM_mapRealPointer(0x40,0x72);
-    *rebootType = 0x1234;
-    PM_callRealMode(0xFFFF,0x0000,&regs,&sregs);
-}
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#define SUPPORT_CTRL_ALT_DEL
-#include "common/keyboard.c"
-
-/****************************************************************************
-REMARKS:
-This function fools the DOS mouse driver into thinking that it is running
-in graphics mode, rather than text mode so we always get virtual coordinates
-correctly rather than character coordinates.
-****************************************************************************/
-int _EVT_foolMouse(void)
-{
-    int oldmode = PM_getByte(_EVT_biosPtr+0x49);
-    PM_setByte(_EVT_biosPtr+0x49,0x10);
-    oldmode |= (EVT_rdinx(0x3C4,0x2) << 8);
-    return oldmode;
-}
-
-/****************************************************************************
-REMARKS:
-This function unfools the DOS mouse driver after we have finished calling it.
-****************************************************************************/
-void _EVT_unfoolMouse(
-    int oldmode)
-{
-    PM_setByte(_EVT_biosPtr+0x49,oldmode);
-
-    /* Some mouse drivers reset the plane mask register for VGA plane 4
-     * modes, which screws up the display on some VGA compatible controllers
-     * in SuperVGA modes. We reset the value back again in here to solve
-     * the problem.
-     */
-    EVT_wrinx(0x3C4,0x2,oldmode >> 8);
-}
-
-/****************************************************************************
-REMARKS:
-Determines if we have a mouse attached and functioning.
-****************************************************************************/
-static ibool detectMouse(void)
-{
-    RMREGS  regs;
-    RMSREGS sregs;
-    uchar   *p;
-    ibool   retval;
-
-    regs.x.ax = 0x3533;                 /* Get interrupt vector 0x33    */
-    PM_int86x(0x21,&regs,&regs,&sregs);
-
-    /* Check that interrupt vector 0x33 is not a zero, and that the first
-     * instruction in the interrupt vector is not an IRET instruction
-     */
-    p = PM_mapRealPointer(sregs.es, regs.x.bx);
-    retval = ((sregs.es != 0) || (regs.x.bx != 0)) && (PM_getByte(p) != 207);
-    return retval;
-}
-
-/****************************************************************************
-PARAMETERS:
-what        - Event code
-message     - Event message
-x,y         - Mouse position at time of event
-but_stat    - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from within
-the mouse interrupt subroutine, so it must be efficient.
-
-NOTE:   Interrupts MUST be OFF while this routine is called to ensure we have
-	mutually exclusive access to our internal data structures for
-	interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addMouseEvent(
-    uint what,
-    uint message,
-    int x,
-    int y,
-    int mickeyX,
-    int mickeyY,
-    uint but_stat)
-{
-    event_t evt;
-
-    if (EVT.count < EVENTQSIZE) {
-	/* Save information in event record. */
-	evt.when = _EVT_getTicks();
-	evt.what = what;
-	evt.message = message;
-	evt.modifiers = but_stat;
-	evt.where_x = x;                /* Save mouse event position    */
-	evt.where_y = y;
-	evt.relative_x = mickeyX;
-	evt.relative_y = mickeyY;
-	evt.modifiers |= EVT.keyModifiers;
-	addEvent(&evt);                 /* Add to tail of event queue   */
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-mask        - Event mask
-butstate    - Button state
-x           - Mouse x coordinate
-y           - Mouse y coordinate
-
-REMARKS:
-Mouse event handling routine. This gets called when a mouse event occurs,
-and we call the addMouseEvent() routine to add the appropriate mouse event
-to the event queue.
-
-Note: Interrupts are ON when this routine is called by the mouse driver code.
-****************************************************************************/
-static void EVTAPI mouseISR(
-    uint mask,
-    uint butstate,
-    int x,
-    int y,
-    int mickeyX,
-    int mickeyY)
-{
-    uint    ps;
-    uint    buttonMask;
-
-    if (mask & 1) {
-	/* Save the current mouse coordinates */
-	EVT.mx = x; EVT.my = y;
-
-	/* If the last event was a movement event, then modify the last
-	 * event rather than post a new one, so that the queue will not
-	 * become saturated. Before we modify the data structures, we
-	 * MUST ensure that interrupts are off.
-	 */
-	ps = _EVT_disableInt();
-	if (EVT.oldMove != -1) {
-	    EVT.evtq[EVT.oldMove].where_x = x;  /* Modify existing one  */
-	    EVT.evtq[EVT.oldMove].where_y = y;
-	    EVT.evtq[EVT.oldMove].relative_x += mickeyX;
-	    EVT.evtq[EVT.oldMove].relative_y += mickeyY;
-	    }
-	else {
-	    EVT.oldMove = EVT.freeHead;         /* Save id of this move event   */
-	    addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
-	    }
-	_EVT_restoreInt(ps);
-	}
-    if (mask & 0x2A) {
-	ps = _EVT_disableInt();
-	buttonMask = 0;
-	if (mask & 2)  buttonMask |= EVT_LEFTBMASK;
-	if (mask & 8)  buttonMask |= EVT_RIGHTBMASK;
-	if (mask & 32) buttonMask |= EVT_MIDDLEBMASK;
-	addMouseEvent(EVT_MOUSEDOWN,buttonMask,x,y,0,0,butstate);
-	EVT.oldMove = -1;
-	_EVT_restoreInt(ps);
-	}
-    if (mask & 0x54) {
-	ps = _EVT_disableInt();
-	buttonMask = 0;
-	if (mask & 2)  buttonMask |= EVT_LEFTBMASK;
-	if (mask & 8)  buttonMask |= EVT_RIGHTBMASK;
-	if (mask & 32) buttonMask |= EVT_MIDDLEBMASK;
-	addMouseEvent(EVT_MOUSEUP,buttonMask,x,y,0,0,butstate);
-	EVT.oldMove = -1;
-	_EVT_restoreInt(ps);
-	}
-    EVT.oldKey = -1;
-}
-
-/****************************************************************************
-REMARKS:
-Keyboard interrupt handler function.
-
-NOTE:   Interrupts are OFF when this routine is called by the keyboard ISR,
-	and we leave them OFF the entire time.
-****************************************************************************/
-static void EVTAPI keyboardISR(void)
-{
-    processRawScanCode(PM_inpb(0x60));
-    PM_outpb(0x20,0x20);
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    int     i;
-
-    PM_init();
-    EVT.mouseMove = mouseMove;
-    _EVT_biosPtr = PM_getBIOSPointer();
-    EVT_resume();
-
-    /* Grab all characters pending in the keyboard buffer and stuff
-     * them into our event buffer. This allows us to pick up any keypresses
-     * while the program is initialising.
-     */
-    while ((i = _EVT_getKeyCode()) != 0)
-	addKeyEvent(EVT_KEYDOWN,i);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVTAPI EVT_resume(void)
-{
-    static int      locked = 0;
-    int             stat;
-    uchar           mods;
-    PM_lockHandle   lh; /* Unused in DOS */
-
-    if (_EVT_useEvents) {
-	/* Initialise the event queue and enable our interrupt handlers */
-	initEventQueue();
-#ifndef NO_KEYBOARD_INTERRUPT
-	PM_setKeyHandler(keyboardISR);
-#endif
-#ifndef NO_MOUSE_INTERRUPT
-	if ((haveMouse = detectMouse()) != 0) {
-	    int oldmode = _EVT_foolMouse();
-	    PM_setMouseHandler(0xFFFF,mouseISR);
-	    _EVT_unfoolMouse(oldmode);
-	    }
-#endif
-
-	/* Read the keyboard modifier flags from the BIOS to get the
-	 * correct initialisation state. The only state we care about is
-	 * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
-	 * CAPSLOCK.
-	 */
-	EVT.keyModifiers = 0;
-	mods = PM_getByte(_EVT_biosPtr+0x17);
-	if (mods & 0x10)
-	    EVT.keyModifiers |= EVT_SCROLLLOCK;
-	if (mods & 0x20)
-	    EVT.keyModifiers |= EVT_NUMLOCK;
-	if (mods & 0x40)
-	    EVT.keyModifiers |= EVT_CAPSLOCK;
-
-	/* Lock all of the code and data used by our protected mode interrupt
-	 * handling routines, so that it will continue to work correctly
-	 * under real mode.
-	 */
-	if (!locked) {
-	    /* It is difficult to ensure that we lock our global data, so we
-	     * do this by taking the address of a variable locking all data
-	     * 2Kb on either side. This should properly cover the global data
-	     * used by the module (the other alternative is to declare the
-	     * variables in assembler, in which case we know it will be
-	     * correct).
-	     */
-	    stat  = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
-	    stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
-	    stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
-	    stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
-	    if (stat) {
-		PM_fatalError("Page locking services failed - interrupt handling not safe!");
-		exit(1);
-		}
-	    locked = 1;
-	    }
-
-	/* Catch program termination signals so we can clean up properly */
-	signal(SIGABRT, _EVT_abort);
-	signal(SIGFPE, _EVT_abort);
-	signal(SIGINT, _EVT_abort);
-	_EVT_installed = true;
-	}
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    RMREGS  regs;
-
-    if (haveMouse) {
-	int oldmode = _EVT_foolMouse();
-	PM_resetMouseDriver(1);
-	regs.x.ax = 7;  /* Mouse function 7 - Set horizontal min and max */
-	regs.x.cx = 0;
-	regs.x.dx = xRes;
-	PM_int86(0x33,&regs,&regs);
-	regs.x.ax = 8;  /* Mouse function 8 - Set vertical min and max   */
-	regs.x.cx = 0;
-	regs.x.dx = yRes;
-	PM_int86(0x33,&regs,&regs);
-	_EVT_unfoolMouse(oldmode);
-	}
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
-    int *x,
-    int *y)
-{
-    RMREGS  regs;
-
-    if (haveMouse) {
-	int oldmode = _EVT_foolMouse();
-	regs.x.ax = 4;      /* Mouse function 4 - Set mouse position    */
-	regs.x.cx = *x;     /* New horizontal coordinate                */
-	regs.x.dx = *y;     /* New vertical coordinate                  */
-	PM_int86(0x33,&regs,&regs);
-	_EVT_unfoolMouse(oldmode);
-	}
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVTAPI EVT_suspend(void)
-{
-    uchar   mods;
-
-    if (_EVT_installed) {
-	/* Restore the interrupt handlers */
-	PM_restoreKeyHandler();
-	if (haveMouse)
-	    PM_restoreMouseHandler();
-	signal(SIGABRT, SIG_DFL);
-	signal(SIGFPE, SIG_DFL);
-	signal(SIGINT, SIG_DFL);
-
-	/* Set the keyboard modifier flags in the BIOS to our values */
-	EVT_allowLEDS(true);
-	mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
-	if (EVT.keyModifiers & EVT_SCROLLLOCK)
-	    mods |= 0x10;
-	if (EVT.keyModifiers & EVT_NUMLOCK)
-	    mods |= 0x20;
-	if (EVT.keyModifiers & EVT_CAPSLOCK)
-	    mods |= 0x40;
-	PM_setByte(_EVT_biosPtr+0x17,mods);
-
-	/* Flag that we are no longer installed */
-	_EVT_installed = false;
-	}
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVTAPI EVT_exit(void)
-{
-    EVT_suspend();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h
deleted file mode 100644
index 35e8e00f72..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit DOS
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c b/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c
deleted file mode 100644
index 2ad9e34f91..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c
+++ /dev/null
@@ -1,2243 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  16/32 bit DOS
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "ztimerc.h"
-#include "mtrr.h"
-#include "pm_help.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include <conio.h>
-#ifdef  __GNUC__
-#include <unistd.h>
-#include <sys/nearptr.h>
-#include <sys/stat.h>
-#else
-#include <direct.h>
-#endif
-#ifdef  __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-typedef struct {
-    int     oldMode;
-    int     old50Lines;
-    } DOS_stateBuf;
-
-#define MAX_RM_BLOCKS   10
-
-static struct {
-    void    *p;
-    uint    tag;
-    } rmBlocks[MAX_RM_BLOCKS];
-
-static uint     VESABuf_len = 1024;     /* Length of the VESABuf buffer     */
-static void     *VESABuf_ptr = NULL;    /* Near pointer to VESABuf          */
-static uint     VESABuf_rseg;           /* Real mode segment of VESABuf     */
-static uint     VESABuf_roff;           /* Real mode offset of VESABuf      */
-static void     (PMAPIP fatalErrorCleanup)(void) = NULL;
-ushort _VARAPI  _PM_savedDS = 0;
-#ifdef  DOS4GW
-static ulong    PDB = 0,*pPDB = NULL;
-#endif
-#ifndef REALMODE
-static char     VXD_name[] = PMHELP_NAME;
-static char     VXD_module[] = PMHELP_MODULE;
-static char     VXD_DDBName[] = PMHELP_DDBNAME;
-static uint     VXD_version = -1;
-static uint     VXD_loadOff = 0;
-static uint     VXD_loadSel = 0;
-uint _VARAPI    _PM_VXD_off = 0;
-uint _VARAPI    _PM_VXD_sel = 0;
-int _VARAPI     _PM_haveCauseWay = -1;
-
-/* Memory mapping cache */
-
-#define MAX_MEMORY_MAPPINGS 100
-typedef struct {
-    ulong   physical;
-    ulong   linear;
-    ulong   limit;
-    } mmapping;
-static mmapping     maps[MAX_MEMORY_MAPPINGS] = {0};
-static int          numMaps = 0;
-
-/* Page sized block cache */
-
-#define PAGES_PER_BLOCK     100
-#define FREELIST_NEXT(p)    (*(void**)(p))
-typedef struct pageblock {
-    struct pageblock    *next;
-    struct pageblock    *prev;
-    void                *freeListStart;
-    void                *freeList;
-    void                *freeListEnd;
-    int                 freeCount;
-    } pageblock;
-static pageblock    *pageBlocks = NULL;
-#endif
-
-/* Start of all page tables in CauseWay */
-
-#define CW_PAGE_TABLE_START (1024UL*4096UL*1023UL)
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-ulong   _ASMAPI _PM_getPDB(void);
-int     _ASMAPI _PM_pagingEnabled(void);
-void    _ASMAPI _PM_VxDCall(VXD_regs *regs,uint off,uint sel);
-
-#ifndef REALMODE
-/****************************************************************************
-REMARKS:
-Exit function to unload the dynamically loaded VxD
-****************************************************************************/
-static void UnloadVxD(void)
-{
-    PMSREGS     sregs;
-    VXD_regs    r;
-
-    r.eax = 2;
-    r.ebx = 0;
-    r.edx = (uint)VXD_module;
-    PM_segread(&sregs);
-#ifdef  __16BIT__
-    r.ds = ((ulong)VXD_module) >> 16;
-#else
-    r.ds = sregs.ds;
-#endif
-    r.es = sregs.es;
-    _PM_VxDCall(&r,VXD_loadOff,VXD_loadSel);
-}
-
-/****************************************************************************
-REMARKS:
-External function to call the PMHELP helper VxD.
-****************************************************************************/
-void PMAPI PM_VxDCall(
-    VXD_regs *regs)
-{
-    if (_PM_VXD_sel != 0 || _PM_VXD_off != 0)
-	_PM_VxDCall(regs,_PM_VXD_off,_PM_VXD_sel);
-}
-
-/****************************************************************************
-RETURNS:
-BCD coded version number of the VxD, or 0 if not loaded (ie: 0x202 - 2.2)
-
-REMARKS:
-This function gets the version number for the VxD that we have connected to.
-****************************************************************************/
-uint PMAPI PMHELP_getVersion(void)
-{
-    VXD_regs    r;
-
-    /* Call the helper VxD to determine the version number */
-    if (_PM_VXD_sel != 0 || _PM_VXD_off != 0) {
-	memset(&r,0,sizeof(r));
-	r.eax = API_NUM(PMHELP_GETVER);
-	_PM_VxDCall(&r,_PM_VXD_off,_PM_VXD_sel);
-	return VXD_version = (uint)r.eax;
-	}
-    return VXD_version = 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Connects to the helper VxD and returns the version number
-
-RETURNS:
-True if the VxD was found and loaded, false otherwise.
-
-REMARKS:
-This function connects to the VxD (loading it if it is dynamically loadable)
-and returns the version number of the VxD.
-****************************************************************************/
-static ibool PMHELP_connect(void)
-{
-    PMREGS      regs;
-    PMSREGS     sregs;
-    VXD_regs    r;
-
-    /* Bail early if we have alread connected */
-    if (VXD_version != -1)
-	return VXD_version != 0;
-
-    /* Get the static SDDHELP.VXD entry point if available */
-    PM_segread(&sregs);
-    regs.x.ax = 0x1684;
-    regs.x.bx = SDDHELP_DeviceID;
-    regs.x.di = 0;
-    sregs.es = 0;
-    PM_int386x(0x2F,&regs,&regs,&sregs);
-    _PM_VXD_sel = sregs.es;
-    _PM_VXD_off = regs.x.di;
-    if (_PM_VXD_sel != 0 || _PM_VXD_off != 0) {
-	if (PMHELP_getVersion() >= PMHELP_VERSION)
-	    return true;
-	}
-
-    /* If we get here, then either SDDHELP.VXD is not loaded, or it is an
-     * earlier version. In this case try to dynamically load the PMHELP.VXD
-     * helper VxD instead.
-     */
-    PM_segread(&sregs);
-    regs.x.ax = 0x1684;
-    regs.x.bx = VXDLDR_DeviceID;
-    regs.x.di = 0;
-    sregs.es = 0;
-    PM_int386x(0x2F,&regs,&regs,&sregs);
-    VXD_loadSel = sregs.es;
-    VXD_loadOff = regs.x.di;
-    if (VXD_loadSel == 0 && VXD_loadOff == 0)
-	return VXD_version = 0;
-    r.eax = 1;
-    r.ebx = 0;
-    r.edx = (uint)VXD_name;
-    PM_segread(&sregs);
-    r.ds = sregs.ds;
-    r.es = sregs.es;
-    _PM_VxDCall(&r,VXD_loadOff,VXD_loadSel);
-    if (r.eax != 0)
-	return VXD_version = 0;
-
-    /* Get the dynamic VxD entry point so we can call it */
-    atexit(UnloadVxD);
-    PM_segread(&sregs);
-    regs.x.ax = 0x1684;
-    regs.x.bx = 0;
-    regs.e.edi = (uint)VXD_DDBName;
-    PM_int386x(0x2F,&regs,&regs,&sregs);
-    _PM_VXD_sel = sregs.es;
-    _PM_VXD_off = regs.x.di;
-    if (_PM_VXD_sel == 0 && _PM_VXD_off == 0)
-	return VXD_version = 0;
-    if (PMHELP_getVersion() >= PMHELP_VERSION)
-	return true;
-    return VXD_version = 0;
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library. First we try to connect to a static SDDHELP.VXD
-helper VxD, and check that it is a version we can use. If not we try to
-dynamically load the PMHELP.VXD helper VxD
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-#ifndef REALMODE
-    PMREGS  regs;
-
-    /* Check if we are running under CauseWay under real DOS */
-    if (_PM_haveCauseWay == -1) {
-	/* Check if we are running under DPMI in which case we will not be
-	 * able to use our special ring 0 CauseWay functions.
-	 */
-	_PM_haveCauseWay = false;
-	regs.x.ax = 0xFF00;
-	PM_int386(0x31,&regs,&regs);
-	if (regs.x.cflag || !(regs.e.edi & 8)) {
-	    /* We are not under DPMI, so now check if CauseWay is active */
-	    regs.x.ax = 0xFFF9;
-	    PM_int386(0x31,&regs,&regs);
-	    if (!regs.x.cflag && regs.e.ecx == 0x43415553 && regs.e.edx == 0x45574159)
-		_PM_haveCauseWay = true;
-	    }
-
-	/* Now connect to PMHELP.VXD and initialise MTRR module */
-	if (!PMHELP_connect())
-	    MTRR_init();
-	}
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-#ifndef REALMODE
-    VXD_regs    regs;
-
-    if (PMHELP_connect()) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_ENABLELFBCOMB);
-	regs.ebx = base;
-	regs.ecx = size;
-	regs.edx = type;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return regs.eax;
-	}
-    return MTRR_enableWriteCombine(base,size,type);
-#else
-    return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return true; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_DOS; }
-
-int PMAPI PM_getModeType(void)
-{
-#if defined(REALMODE)
-    return PM_realMode;
-#elif defined(PM286)
-    return PM_286;
-#elif defined(PM386)
-    return PM_386;
-#endif
-}
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    fprintf(stderr,"%s\n", msg);
-    exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
-    if (VESABuf_ptr)
-	PM_freeRealSeg(VESABuf_ptr);
-    VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	atexit(ExitVBEBuf);
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return PM_int386x(intno,in,out,&sregs);
-}
-
-/* Routines to set and get the real mode interrupt vectors, by making
- * direct real mode calls to DOS and bypassing the DOS extenders API.
- * This is the safest way to handle this, as some servers try to be
- * smart about changing real mode vectors.
- */
-
-void PMAPI _PM_getRMvect(int intno, long *realisr)
-{
-    RMREGS  regs;
-    RMSREGS sregs;
-
-    PM_saveDS();
-    regs.h.ah = 0x35;
-    regs.h.al = intno;
-    PM_int86x(0x21, &regs, &regs, &sregs);
-    *realisr = ((long)sregs.es << 16) | regs.x.bx;
-}
-
-void PMAPI _PM_setRMvect(int intno, long realisr)
-{
-    RMREGS  regs;
-    RMSREGS sregs;
-
-    PM_saveDS();
-    regs.h.ah = 0x25;
-    regs.h.al = intno;
-    sregs.ds = (int)(realisr >> 16);
-    regs.x.dx = (int)(realisr & 0xFFFF);
-    PM_int86x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI _PM_addRealModeBlock(void *mem,uint tag)
-{
-    int i;
-
-    for (i = 0; i < MAX_RM_BLOCKS; i++) {
-	if (rmBlocks[i].p == NULL) {
-	    rmBlocks[i].p = mem;
-	    rmBlocks[i].tag = tag;
-	    return;
-	    }
-	}
-    PM_fatalError("To many real mode memory block allocations!");
-}
-
-uint PMAPI _PM_findRealModeBlock(void *mem)
-{
-    int i;
-
-    for (i = 0; i < MAX_RM_BLOCKS; i++) {
-	if (rmBlocks[i].p == mem)
-	    return rmBlocks[i].tag;
-	}
-    PM_fatalError("Could not find prior real mode memory block allocation!");
-    return 0;
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'C'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[256];
-    char        *env;
-
-    if ((env = getenv("NUCLEUS_PATH")) != NULL)
-	return env;
-    if ((env = getenv("WINBOOTDIR")) != NULL) {
-	/* Running in a Windows 9x DOS box or DOS mode */
-	strcpy(path,env);
-	strcat(path,"\\system\\nucleus");
-	return path;
-	}
-    if ((env = getenv("SystemRoot")) != NULL) {
-	/* Running in an NT/2K DOS box */
-	strcpy(path,env);
-	strcat(path,"\\system32\\nucleus");
-	return path;
-	}
-    return "c:\\nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return "DOS"; }
-
-const char * PMAPI PM_getMachineName(void)
-{ return "DOS"; }
-
-int PMAPI PM_kbhit(void)
-{
-    return kbhit();
-}
-
-int PMAPI PM_getch(void)
-{
-    return getch();
-}
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
-    /* Not used for DOS */
-    (void)hwndUser;
-    (void)device;
-    (void)xRes;
-    (void)yRes;
-    (void)bpp;
-    (void)fullScreen;
-    return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    return sizeof(DOS_stateBuf);
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
-    RMREGS          regs;
-    DOS_stateBuf    *sb = stateBuf;
-
-    /* Save the old video mode state */
-    regs.h.ah = 0x0F;
-    PM_int86(0x10,&regs,&regs);
-    sb->oldMode = regs.h.al & 0x7F;
-    sb->old50Lines = false;
-    if (sb->oldMode == 0x3) {
-	regs.x.ax = 0x1130;
-	regs.x.bx = 0;
-	regs.x.dx = 0;
-	PM_int86(0x10,&regs,&regs);
-	sb->old50Lines = (regs.h.dl == 42 || regs.h.dl == 49);
-	}
-    (void)hwndConsole;
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
-    /* Not used for DOS */
-    (void)saveState;
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
-    RMREGS              regs;
-    const DOS_stateBuf  *sb = stateBuf;
-
-    /* Retore 50 line mode if set */
-    if (sb->old50Lines) {
-	regs.x.ax = 0x1112;
-	regs.x.bx = 0;
-	PM_int86(0x10,&regs,&regs);
-	}
-    (void)hwndConsole;
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
-    /* Not used for DOS */
-    (void)hwndConsole;
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x50,x);
-    PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setWord(_biosPtr+0x4A,width);
-    PM_setWord(_biosPtr+0x4C,width*2);
-    PM_setByte(_biosPtr+0x84,height-1);
-    if (height > 25) {
-	PM_setWord(_biosPtr+0x60,0x0607);
-	PM_setByte(_biosPtr+0x85,0x08);
-	}
-    else {
-	PM_setWord(_biosPtr+0x60,0x0D0E);
-	PM_setByte(_biosPtr+0x85,0x016);
-	}
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
-    return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
-    PM_free(ptr);
-}
-
-#define GetRMVect(intno,isr)    *(isr) = ((ulong*)rmZeroPtr)[intno]
-#define SetRMVect(intno,isr)    ((ulong*)rmZeroPtr)[intno] = (isr)
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    static int      firstTime = true;
-    static uchar    *rmZeroPtr;
-    long            Current10,Current6D,Current42;
-    RMREGS          regs;
-    RMSREGS         sregs;
-
-    /* Create a zero memory mapping for us to use */
-    if (firstTime) {
-	rmZeroPtr = PM_mapPhysicalAddr(0,0x7FFF,true);
-	firstTime = false;
-	}
-
-    /* Remap the secondary BIOS to 0xC0000 physical */
-    if (BIOSPhysAddr != 0xC0000L || BIOSLen > 32768) {
-	/* DOS cannot virtually remap the BIOS, so we can only work if all
-	 * the secondary controllers are identical, and we then use the
-	 * BIOS on the first controller for all the remaining controllers.
-	 *
-	 * For OS'es that do virtual memory, and remapping of 0xC0000
-	 * physical (perhaps a copy on write mapping) should be all that
-	 * is needed.
-	 */
-	return false;
-	}
-
-    /* Save current handlers of int 10h and 6Dh */
-    GetRMVect(0x10,&Current10);
-    GetRMVect(0x6D,&Current6D);
-
-    /* POST the secondary BIOS */
-    GetRMVect(0x42,&Current42);
-    SetRMVect(0x10,Current42);  /* Restore int 10h to STD-BIOS */
-    regs.x.ax = axVal;
-    PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
-    /* Restore current handlers */
-    SetRMVect(0x10,Current10);
-    SetRMVect(0x6D,Current6D);
-
-    /* Second the primary BIOS mappin 1:1 for 0xC0000 physical */
-    if (BIOSPhysAddr != 0xC0000L) {
-	/* DOS does not support this */
-	(void)mappedBIOS;
-	}
-    return true;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    ulong           microseconds = milliseconds * 1000L;
-    LZTimerObject   tm;
-
-    LZTimerOnExt(&tm);
-    while (LZTimerLapExt(&tm) < microseconds)
-	;
-    LZTimerOffExt(&tm);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
-    int level)
-{
-    return level;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
-    PM_findData *findData,
-    struct find_t *blk)
-{
-    ulong   dwSize = findData->dwSize;
-
-    memset(findData,0,findData->dwSize);
-    findData->dwSize = dwSize;
-    if (blk->attrib & _A_RDONLY)
-	findData->attrib |= PM_FILE_READONLY;
-    if (blk->attrib & _A_SUBDIR)
-	findData->attrib |= PM_FILE_DIRECTORY;
-    if (blk->attrib & _A_ARCH)
-	findData->attrib |= PM_FILE_ARCHIVE;
-    if (blk->attrib & _A_HIDDEN)
-	findData->attrib |= PM_FILE_HIDDEN;
-    if (blk->attrib & _A_SYSTEM)
-	findData->attrib |= PM_FILE_SYSTEM;
-    findData->sizeLo = blk->size;
-    strncpy(findData->name,blk->name,PM_MAX_PATH);
-    findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK   (_A_RDONLY | _A_ARCH | _A_SUBDIR | _A_HIDDEN | _A_SYSTEM)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    struct find_t *blk;
-
-    if ((blk = PM_malloc(sizeof(*blk))) == NULL)
-	return PM_FILE_INVALID;
-    if (_dos_findfirst((char*)filename,FIND_MASK,blk) == 0) {
-	convertFindData(findData,blk);
-	return blk;
-	}
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    struct find_t *blk = handle;
-
-    if (_dos_findnext(blk) == 0) {
-	convertFindData(findData,blk);
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    PM_free(handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    RMREGS  regs;
-    regs.h.dl = (uchar)(drive - 'A' + 1);
-    regs.h.ah = 0x36;               /* Get disk information service */
-    PM_int86(0x21,&regs,&regs);
-    return regs.x.ax != 0xFFFF;     /* AX = 0xFFFF if disk is invalid */
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    uint oldDrive,maxDrives;
-    _dos_getdrive(&oldDrive);
-    _dos_setdrive(drive,&maxDrives);
-    getcwd(dir,len);
-    _dos_setdrive(oldDrive,&maxDrives);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-#if defined(TNT) && defined(_MSC_VER)
-    DWORD attr = 0;
-
-    if (attrib & PM_FILE_READONLY)
-	attr |= FILE_ATTRIBUTE_READONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	attr |= FILE_ATTRIBUTE_ARCHIVE;
-    if (attrib & PM_FILE_HIDDEN)
-	attr |= FILE_ATTRIBUTE_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	attr |= FILE_ATTRIBUTE_SYSTEM;
-    SetFileAttributes((LPSTR)filename, attr);
-#else
-    uint attr = 0;
-
-    if (attrib & PM_FILE_READONLY)
-	attr |= _A_RDONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	attr |= _A_ARCH;
-    if (attrib & PM_FILE_HIDDEN)
-	attr |= _A_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	attr |= _A_SYSTEM;
-    _dos_setfileattr(filename,attr);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-#ifdef  __GNUC__
-    return mkdir(filename,S_IRUSR) == 0;
-#else
-    return mkdir(filename) == 0;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return rmdir(filename) == 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Generic DPMI routines common to 16/32 bit code                          */
-/*-------------------------------------------------------------------------*/
-
-#ifndef REALMODE
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit)
-{
-    PMREGS  r;
-    int     i;
-    ulong   baseAddr,baseOfs,roundedLimit;
-
-    /* We can't map memory below 1Mb, but the linear address are already
-     * mapped 1:1 for this memory anyway so we just return the base address.
-     */
-    if (physAddr < 0x100000L)
-	return physAddr;
-
-    /* Search table of existing mappings to see if we have already mapped
-     * a region of memory that will serve this purpose. We do this because
-     * DPMI 0.9 does not allow us to free physical memory mappings, and if
-     * the mappings get re-used in the program we want to avoid allocating
-     * more mappings than necessary.
-     */
-    for (i = 0; i < numMaps; i++) {
-	if (maps[i].physical == physAddr && maps[i].limit == limit)
-	    return maps[i].linear;
-	}
-
-    /* Find a free slot in our physical memory mapping table */
-    for (i = 0; i < numMaps; i++) {
-	if (maps[i].limit == 0)
-	    break;
-	}
-    if (i == numMaps) {
-	i = numMaps++;
-	if (i == MAX_MEMORY_MAPPINGS)
-	    return NULL;
-	}
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to DPMI as some extenders
-     * will fail the calls unless this is the case. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    baseOfs = physAddr & 4095;
-    baseAddr = physAddr & ~4095;
-    roundedLimit = ((limit+baseOfs+1+4095) & ~4095)-1;
-    r.x.ax = 0x800;
-    r.x.bx = baseAddr >> 16;
-    r.x.cx = baseAddr & 0xFFFF;
-    r.x.si = roundedLimit >> 16;
-    r.x.di = roundedLimit & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0xFFFFFFFFUL;
-    maps[i].physical = physAddr;
-    maps[i].limit = limit;
-    maps[i].linear = ((ulong)r.x.bx << 16) + r.x.cx + baseOfs;
-    return maps[i].linear;
-}
-
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr)
-{
-    PMREGS  r;
-
-    r.x.ax = 7;                     /* DPMI set selector base address   */
-    r.x.bx = sel;
-    r.x.cx = linAddr >> 16;
-    r.x.dx = linAddr & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0;
-    return 1;
-}
-
-ulong PMAPI DPMI_getSelectorBase(ushort sel)
-{
-    PMREGS  r;
-
-    r.x.ax = 6;                     /* DPMI get selector base address   */
-    r.x.bx = sel;
-    PM_int386(0x31, &r, &r);
-    return ((ulong)r.x.cx << 16) + r.x.dx;
-}
-
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit)
-{
-    PMREGS  r;
-
-    r.x.ax = 8;                     /* DPMI set selector limit          */
-    r.x.bx = sel;
-    r.x.cx = limit >> 16;
-    r.x.dx = limit & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0;
-    return 1;
-}
-
-uint PMAPI DPMI_createSelector(ulong base,ulong limit)
-{
-    uint    sel;
-    PMREGS  r;
-
-    /* Allocate 1 descriptor */
-    r.x.ax = 0;
-    r.x.cx = 1;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag) return 0;
-    sel = r.x.ax;
-
-    /* Set the descriptor access rights (for a 32 bit page granular
-     * segment).
-     */
-    if (limit >= 0x10000L) {
-	r.x.ax = 9;
-	r.x.bx = sel;
-	r.x.cx = 0x40F3;
-	PM_int386(0x31, &r, &r);
-	}
-
-    /* Map physical memory and create selector */
-    if ((base = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFFUL)
-	return 0;
-    if (!DPMI_setSelectorBase(sel,base))
-	return 0;
-    if (!DPMI_setSelectorLimit(sel,limit))
-	return 0;
-    return sel;
-}
-
-void PMAPI DPMI_freeSelector(uint sel)
-{
-    PMREGS  r;
-
-    r.x.ax = 1;
-    r.x.bx = sel;
-    PM_int386(0x31, &r, &r);
-}
-
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len)
-{
-    PMREGS  r;
-
-    r.x.ax = 0x600;                     /* DPMI Lock Linear Region      */
-    r.x.bx = (linear >> 16);            /* Linear address in BX:CX      */
-    r.x.cx = (linear & 0xFFFF);
-    r.x.si = (len >> 16);               /* Length in SI:DI              */
-    r.x.di = (len & 0xFFFF);
-    PM_int386(0x31, &r, &r);
-    return (!r.x.cflag);
-}
-
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len)
-{
-    PMREGS  r;
-
-    r.x.ax = 0x601;                     /* DPMI Unlock Linear Region    */
-    r.x.bx = (linear >> 16);            /* Linear address in BX:CX      */
-    r.x.cx = (linear & 0xFFFF);
-    r.x.si = (len >> 16);               /* Length in SI:DI              */
-    r.x.di = (len & 0xFFFF);
-    PM_int386(0x31, &r, &r);
-    return (!r.x.cflag);
-}
-
-/****************************************************************************
-REMARKS:
-Adjust the page table caching bits directly. Requires ring 0 access and
-only works with DOS4GW and compatible extenders (CauseWay also works since
-it has direct support for the ring 0 instructions we need from ring 3). Will
-not work in a DOS box, but we call into the ring 0 helper VxD so we should
-never get here in a DOS box anyway (assuming the VxD is present). If we
-do get here and we are in windows, this code will be skipped.
-****************************************************************************/
-static void PM_adjustPageTables(
-    ulong linear,
-    ulong limit,
-    ibool isCached)
-{
-#ifdef  DOS4GW
-    int     startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
-    ulong   andMask,orMask,pageTable,*pPageTable;
-
-    andMask = ~0x18;
-    orMask = (isCached) ? 0x00 : 0x18;
-    if (_PM_pagingEnabled() == 1 && (PDB = _PM_getPDB()) != 0) {
-	if (_PM_haveCauseWay) {
-	    /* CauseWay is a little different in the page table handling.
-	     * The code that we use for DOS4G/W does not appear to work
-	     * with CauseWay correctly as it does not appear to allow us
-	     * to map the page tables directly. Instead we can directly
-	     * access the page table entries in extended memory where
-	     * CauseWay always locates them (starting at 1024*4096*1023)
-	     */
-	    startPage = (linear >> 12);
-	    endPage = ((linear+limit) >> 12);
-	    pPageTable = (ulong*)CW_PAGE_TABLE_START;
-	    for (iPage = startPage; iPage <= endPage; iPage++)
-		pPageTable[iPage] = (pPageTable[iPage] & andMask) | orMask;
-	    }
-	else {
-	    pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
-	    if (pPDB) {
-		startPDB = (linear >> 22) & 0x3FF;
-		startPage = (linear >> 12) & 0x3FF;
-		endPDB = ((linear+limit) >> 22) & 0x3FF;
-		endPage = ((linear+limit) >> 12) & 0x3FF;
-		for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
-		    pageTable = pPDB[iPDB] & ~0xFFF;
-		    pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
-		    start = (iPDB == startPDB) ? startPage : 0;
-		    end = (iPDB == endPDB) ? endPage : 0x3FF;
-		    for (iPage = start; iPage <= end; iPage++)
-			pPageTable[iPage] = (pPageTable[iPage] & andMask) | orMask;
-		    }
-		}
-	    }
-	PM_flushTLB();
-	}
-#endif
-}
-
-void * PMAPI DPMI_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    PMSREGS     sregs;
-    ulong       linAddr;
-    ulong       DSBaseAddr;
-
-    /* Get the base address for the default DS selector */
-    PM_segread(&sregs);
-    DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
-    if ((base < 0x100000) && (DSBaseAddr == 0)) {
-	/* DS is zero based, so we can directly access the first 1Mb of
-	 * system memory (like under DOS4GW).
-	 */
-	return (void*)base;
-	}
-
-    /* Map the memory to a linear address using DPMI function 0x800 */
-    if ((linAddr = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFF) {
-	if (base >= 0x100000)
-	    return NULL;
-	/* If the linear address mapping fails but we are trying to
-	 * map an area in the first 1Mb of system memory, then we must
-	 * be running under a Windows or OS/2 DOS box. Under these
-	 * environments we can use the segment wrap around as a fallback
-	 * measure, as this does work properly.
-	 */
-	linAddr = base;
-	}
-
-    /* Now expand the default DS selector to 4Gb so we can access it */
-    if (!DPMI_setSelectorLimit(sregs.ds,0xFFFFFFFFUL))
-	return NULL;
-
-    /* Finally enable caching for the page tables that we just mapped in,
-     * since DOS4GW and PMODE/W create the page table entries without
-     * caching enabled which hurts the performance of the linear framebuffer
-     * as it disables write combining on Pentium Pro and above processors.
-     *
-     * For those processors cache disabling is better handled through the
-     * MTRR registers anyway (we can write combine a region but disable
-     * caching) so that MMIO register regions do not screw up.
-     */
-    if (DSBaseAddr == 0)
-	PM_adjustPageTables(linAddr,limit,isCached);
-
-    /* Now return the base address of the memory into the default DS */
-    return (void*)(linAddr - DSBaseAddr);
-}
-
-#if defined(PM386)
-
-/* Some DOS extender implementations do not directly support calling a
- * real mode procedure from protected mode. However we can simulate what
- * we need temporarily hooking the INT 6Ah vector with a small real mode
- * stub that will call our real mode code for us.
- */
-
-static uchar int6AHandler[] = {
-    0x00,0x00,0x00,0x00,        /*  __PMODE_callReal variable           */
-    0xFB,                       /*  sti                                 */
-    0x2E,0xFF,0x1E,0x00,0x00,   /*  call    [cs:__PMODE_callReal]       */
-    0xCF,                       /*  iretf                               */
-    };
-static uchar *crPtr = NULL; /* Pointer to of int 6A handler         */
-static uint crRSeg,crROff;  /* Real mode seg:offset of handler      */
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
-    RMSREGS *sregs)
-{
-    uchar   *p;
-    uint    oldSeg,oldOff;
-
-    if (!crPtr) {
-	/* Allocate and copy the memory block only once */
-	crPtr = PM_allocRealSeg(sizeof(int6AHandler), &crRSeg, &crROff);
-	memcpy(crPtr,int6AHandler,sizeof(int6AHandler));
-	}
-    PM_setWord(crPtr,off);              /* Plug in address to call  */
-    PM_setWord(crPtr+2,seg);
-    p = PM_mapRealPointer(0,0x6A * 4);
-    oldOff = PM_getWord(p);             /* Save old handler address */
-    oldSeg = PM_getWord(p+2);
-    PM_setWord(p,crROff+4);             /* Hook 6A handler          */
-    PM_setWord(p+2,crRSeg);
-    PM_int86x(0x6A, in, in, sregs);     /* Call real mode code      */
-    PM_setWord(p,oldOff);               /* Restore old handler      */
-    PM_setWord(p+2,oldSeg);
-}
-
-#endif  /* PM386 */
-
-#endif  /* !REALMODE */
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked, physically contiguous memory. The memory
-may be required to be below the 16Meg boundary.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16Meg)
-{
-    uchar           *p,*roundedP;
-    uint            r_seg,r_off;
-    uint            roundedSize = (size + 4 + 0xFFF) & ~0xFFF;
-    PM_lockHandle   lh; /* Unused in DOS */
-#ifndef REALMODE
-    VXD_regs        regs;
-
-    /* If we have connected to our helper VxD in a Windows DOS box, use the
-     * helper VxD services to allocate the memory that we need.
-     */
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_ALLOCLOCKED);
-	regs.ebx = size;
-	regs.ecx = (ulong)physAddr;
-	regs.edx = contiguous | (below16Meg << 8);
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return (void*)regs.eax;
-	}
-
-    /* If the memory is not contiguous, we simply need to allocate it
-     * using regular memory allocation services, and lock it down
-     * in memory.
-     *
-     * For contiguous memory blocks, the only way to guarantee contiguous physical
-     * memory addresses under DOS is to allocate the memory below the
-     * 1Meg boundary as real mode memory.
-     *
-     * Note that we must page align the memory block, and we also must
-     * keep track of the non-aligned pointer so we can properly free
-     * it later. Hence we actually allocate 4 bytes more than the
-     * size rounded up to the next 4K boundary.
-     */
-    if (!contiguous)
-	p = PM_malloc(roundedSize);
-    else
-#endif
-	p = PM_allocRealSeg(roundedSize,&r_seg,&r_off);
-    if (p == NULL)
-	return NULL;
-    roundedP = (void*)(((ulong)p + 0xFFF) & ~0xFFF);
-    *((ulong*)(roundedP + size)) = (ulong)p;
-    PM_lockDataPages(roundedP,size,&lh);
-    if ((*physAddr = PM_getPhysicalAddr(roundedP)) == 0xFFFFFFFF) {
-	PM_freeLockedMem(roundedP,size,contiguous);
-	return NULL;
-	}
-
-    /* Disable caching for the memory since it is probably a DMA buffer */
-#ifndef REALMODE
-    PM_adjustPageTables((ulong)roundedP,size-1,false);
-#endif
-    return roundedP;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
-#ifndef REALMODE
-    VXD_regs        regs;
-    PM_lockHandle   lh; /* Unused in DOS */
-
-    if (!p)
-	return;
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_FREELOCKED);
-	regs.ebx = (ulong)p;
-	regs.ecx = size;
-	regs.edx = contiguous;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return;
-	}
-    PM_unlockDataPages(p,size,&lh);
-    if (!contiguous)
-	free(*((void**)((uchar*)p + size)));
-    else
-#endif
-	PM_freeRealSeg(*((void**)((char*)p + size)));
-}
-
-#ifndef REALMODE
-/****************************************************************************
-REMARKS:
-Allocates a new block of pages for the page block manager.
-****************************************************************************/
-static pageblock *PM_addNewPageBlock(void)
-{
-    int         i,size;
-    pageblock   *newBlock;
-    char        *p,*next;
-
-    /* Allocate memory for the new page block, and add to head of list */
-    size = PAGES_PER_BLOCK * PM_PAGE_SIZE + (PM_PAGE_SIZE-1) + sizeof(pageblock);
-    if ((newBlock = PM_malloc(size)) == NULL)
-	return NULL;
-    newBlock->prev = NULL;
-    newBlock->next = pageBlocks;
-    if (pageBlocks)
-	pageBlocks->prev = newBlock;
-    pageBlocks = newBlock;
-
-    /* Initialise the page aligned free list for the page block */
-    newBlock->freeCount = PAGES_PER_BLOCK;
-    newBlock->freeList = p = (char*)(((ulong)(newBlock + 1) + (PM_PAGE_SIZE-1)) & ~(PM_PAGE_SIZE-1));
-    newBlock->freeListStart = newBlock->freeList;
-    newBlock->freeListEnd = p + (PAGES_PER_BLOCK-1) * PM_PAGE_SIZE;
-    for (i = 0; i < PAGES_PER_BLOCK; i++,p = next)
-	FREELIST_NEXT(p) = next = p + PM_PAGE_SIZE;
-    FREELIST_NEXT(p - PM_PAGE_SIZE) = NULL;
-    return newBlock;
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-#ifndef REALMODE
-    VXD_regs        regs;
-    pageblock       *block;
-    void            *p;
-    PM_lockHandle   lh; /* Unused in DOS */
-
-    /* Call the helper VxD for this service if we are running in a DOS box */
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_ALLOCPAGE);
-	regs.ebx = locked;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return (void*)regs.eax;
-	}
-
-    /* Scan the block list looking for any free blocks. Allocate a new
-     * page block if no free blocks are found.
-     */
-    for (block = pageBlocks; block != NULL; block = block->next) {
-	if (block->freeCount)
-	    break;
-	}
-    if (block == NULL && (block = PM_addNewPageBlock()) == NULL)
-	return NULL;
-    block->freeCount--;
-    p = block->freeList;
-    block->freeList = FREELIST_NEXT(p);
-    if (locked)
-	PM_lockDataPages(p,PM_PAGE_SIZE,&lh);
-    return p;
-#else
-    return NULL;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
-    void *p)
-{
-#ifndef REALMODE
-    VXD_regs    regs;
-    pageblock   *block;
-
-    /* Call the helper VxD for this service if we are running in a DOS box */
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_FREEPAGE);
-	regs.ebx = (ulong)p;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return;
-	}
-
-    /* First find the page block that this page belongs to */
-    for (block = pageBlocks; block != NULL; block = block->next) {
-	if (p >= block->freeListStart && p <= block->freeListEnd)
-	    break;
-	}
-    CHECK(block != NULL);
-
-    /* Now free the block by adding it to the free list */
-    FREELIST_NEXT(p) = block->freeList;
-    block->freeList = p;
-    if (++block->freeCount == PAGES_PER_BLOCK) {
-	/* If all pages in the page block are now free, free the entire
-	 * page block itself.
-	 */
-	if (block == pageBlocks) {
-	    /* Delete from head */
-	    pageBlocks = block->next;
-	    if (block->next)
-		block->next->prev = NULL;
-	    }
-	else {
-	    /* Delete from middle of list */
-	    CHECK(block->prev != NULL);
-	    block->prev->next = block->next;
-	    if (block->next)
-		block->next->prev = block->prev;
-	    }
-	PM_free(block);
-	}
-#else
-    (void)p;
-#endif
-}
-
-/*-------------------------------------------------------------------------*/
-/* DOS Real Mode support.                                                  */
-/*-------------------------------------------------------------------------*/
-
-#ifdef REALMODE
-
-#ifndef MK_FP
-#define MK_FP(s,o)  ( (void far *)( ((ulong)(s) << 16) + \
-		    (ulong)(o) ))
-#endif
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{ return MK_FP(r_seg,r_off); }
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    return MK_FP(0x40,0);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    return MK_FP(0xA000,0);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    uint sel = base >> 4;
-    uint off = base & 0xF;
-    limit = limit;
-    return MK_FP(sel,off);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{ ptr = ptr; }
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    return ((((ulong)p >> 16) << 4) + (ushort)p);
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    /* Call malloc() to allocate the memory for us */
-    void *p = PM_malloc(size);
-    *r_seg = FP_SEG(p);
-    *r_off = FP_OFF(p);
-    return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    if (mem) PM_free(mem);
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    return PM_int386(intno,in,out);
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    return PM_int386x(intno,in,out,sregs);
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    PMREGS regs;
-
-    regs.h.ah = 0x48;
-    regs.x.bx = 0xFFFF;
-    PM_int86(0x21,&regs,&regs);
-    *physical = *total = regs.x.bx * 16UL;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Phar Lap TNT DOS Extender support.                                      */
-/*-------------------------------------------------------------------------*/
-
-#ifdef TNT
-
-#include <pldos32.h>
-#include <pharlap.h>
-#include <hw386.h>
-
-static uchar *zeroPtr = NULL;
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
-    return (void*)(zeroPtr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    static void *bankPtr;
-    if (!bankPtr)
-	bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-    return bankPtr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    CONFIG_INF  config;
-    ULONG       offset;
-    int         err;
-    ulong       baseAddr,baseOfs,newLimit;
-    VXD_regs    regs;
-
-    /* If we have connected to our helper VxD in a Windows DOS box, use
-     * the helper VxD services to map memory instead of the DPMI services.
-     * We do this because the helper VxD can properly disable caching
-     * where necessary, which we can only do directly here if we are
-     * running at ring 0 (ie: under real DOS).
-     */
-    if (VXD_version == -1)
-	PM_init();
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_MAPPHYS);
-	regs.ebx = base;
-	regs.ecx = limit;
-	regs.edx = isCached;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return (void*)regs.eax;
-	}
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to TNT. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    baseOfs = base & 4095;
-    baseAddr = base & ~4095;
-    newLimit = ((limit+baseOfs+1+4095) & ~4095)-1;
-    _dx_config_inf(&config, (UCHAR*)&config);
-    err = _dx_map_phys(config.c_ds_sel,baseAddr,(newLimit + 4095) / 4096,&offset);
-    if (err == 130) {
-	/* If the TNT function failed, we are running in a DPMI environment
-	 * and this function does not work. However we know how to handle
-	 * DPMI properly, so we use our generic DPMI functions to do
-	 * what the TNT runtime libraries can't.
-	 */
-	return DPMI_mapPhysicalAddr(base,limit,isCached);
-	}
-    if (err == 0)
-	return (void*)(offset + baseOfs);
-    return NULL;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{ return 0xFFFFFFFFUL; }
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF);
-    return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    USHORT  addr,t;
-    void    *p;
-
-    if (_dx_real_alloc((size + 0xF) >> 4,&addr,&t) != 0)
-	return 0;
-    *r_seg = addr;                  /* Real mode segment address    */
-    *r_off = 0;                     /* Real mode segment offset     */
-    p = PM_mapRealPointer(*r_seg,*r_off);
-    _PM_addRealModeBlock(p,addr);
-    return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    if (mem) _dx_real_free(_PM_findRealModeBlock(mem));
-}
-
-#define INDPMI(reg)     rmregs.reg = regs->reg
-#define OUTDPMI(reg)    regs->reg = rmregs.reg
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    SWI_REGS    rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    INDPMI(eax); INDPMI(ebx); INDPMI(ecx); INDPMI(edx); INDPMI(esi); INDPMI(edi);
-
-    _dx_real_int(intno,&rmregs);
-
-    OUTDPMI(eax); OUTDPMI(ebx); OUTDPMI(ecx); OUTDPMI(edx); OUTDPMI(esi); OUTDPMI(edi);
-    regs->flags = rmregs.flags;
-}
-
-#define IN(reg)     rmregs.reg = in->e.reg
-#define OUT(reg)    out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    SWI_REGS    rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
-    _dx_real_int(intno,&rmregs);
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    SWI_REGS    rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    rmregs.es = sregs->es;
-    rmregs.ds = sregs->ds;
-
-    _dx_real_int(intno,&rmregs);
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    sregs->es = rmregs.es;
-    sregs->cs = rmregs.cs;
-    sregs->ss = rmregs.ss;
-    sregs->ds = rmregs.ds;
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    PMREGS  r;
-    uint    data[25];
-
-    r.x.ax = 0x2520;                /* Get free memory info */
-    r.x.bx = 0;
-    r.e.edx = (uint)data;
-    PM_int386(0x21, &r, &r);
-    *physical = data[21] * 4096;
-    *total = data[23] * 4096;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Symantec C++ DOSX and FlashTek X-32/X-32VM support                      */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOSX) || defined(X32VM)
-
-#ifdef  X32VM
-#include <x32.h>
-
-#define _x386_mk_protected_ptr(p)   _x32_mk_protected_ptr((void*)p)
-#define _x386_free_protected_ptr(p) _x32_free_protected_ptr(p)
-#define _x386_zero_base_ptr         _x32_zero_base_ptr
-#else
-extern void *_x386_zero_base_ptr;
-#endif
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    return (void*)((ulong)_x386_zero_base_ptr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    PMREGS  r;
-
-    r.h.ah = 0x48;                  /* DOS function 48h - allocate mem  */
-    r.x.bx = (size + 0xF) >> 4;     /* Number of paragraphs to allocate */
-    PM_int386(0x21, &r, &r);        /* Call DOS extender                */
-    if (r.x.cflag)
-	return 0;                   /* Could not allocate the memory    */
-    *r_seg = r.e.eax;
-    *r_off = 0;
-    return PM_mapRealPointer(*r_seg,*r_off);
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    /* Cannot de-allocate this memory */
-    mem = mem;
-}
-
-#pragma pack(1)
-
-typedef struct {
-    ushort  intno;
-    ushort  ds;
-    ushort  es;
-    ushort  fs;
-    ushort  gs;
-    ulong   eax;
-    ulong   edx;
-    } _RMREGS;
-
-#pragma pack()
-
-#define IN(reg)     regs.e.reg = in->e.reg
-#define OUT(reg)    out->e.reg = regs.e.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    _RMREGS rmregs;
-    PMREGS  regs;
-    PMSREGS pmsregs;
-
-    rmregs.intno = intno;
-    rmregs.eax = in->e.eax;
-    rmregs.edx = in->e.edx;
-    IN(ebx); IN(ecx); IN(esi); IN(edi);
-    regs.x.ax = 0x2511;
-    regs.e.edx = (uint)(&rmregs);
-    PM_segread(&pmsregs);
-    PM_int386x(0x21,&regs,&regs,&pmsregs);
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(esi); OUT(edi);
-    out->x.dx = rmregs.edx;
-    out->x.cflag = regs.x.cflag;
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out, RMSREGS *sregs)
-{
-    _RMREGS rmregs;
-    PMREGS  regs;
-    PMSREGS pmsregs;
-
-    rmregs.intno = intno;
-    rmregs.eax = in->e.eax;
-    rmregs.edx = in->e.edx;
-    rmregs.es = sregs->es;
-    rmregs.ds = sregs->ds;
-    IN(ebx); IN(ecx); IN(esi); IN(edi);
-    regs.x.ax = 0x2511;
-    regs.e.edx = (uint)(&rmregs);
-    PM_segread(&pmsregs);
-    PM_int386x(0x21,&regs,&regs,&pmsregs);
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(esi); OUT(edi);
-    sregs->es = rmregs.es;
-    sregs->ds = rmregs.ds;
-    out->x.dx = rmregs.edx;
-    out->x.cflag = regs.x.cflag;
-    return out->x.ax;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    return (void*)((ulong)_x386_zero_base_ptr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    return (void*)((ulong)_x386_zero_base_ptr + 0xA0000);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    VXD_regs    regs;
-
-    /* If we have connected to our helper VxD in a Windows DOS box, use
-     * the helper VxD services to map memory instead of the DPMI services.
-     * We do this because the helper VxD can properly disable caching
-     * where necessary, which we can only do directly here if we are
-     * running at ring 0 (ie: under real DOS).
-     */
-    if (VXD_version == -1)
-	PM_init();
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_MAPPHYS);
-	regs.ebx = base;
-	regs.ecx = limit;
-	regs.edx = isCached;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return (void*)regs.eax;
-	}
-
-    if (base > 0x100000)
-	return _x386_map_physical_address((void*)base,limit);
-    return (void*)((ulong)_x386_zero_base_ptr + base);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    /* Mapping cannot be freed */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{ return 0xFFFFFFFFUL; }
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-ulong _cdecl _X32_getPhysMem(void);
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    PMREGS  regs;
-
-    /* Get total memory available, including virtual memory */
-    regs.x.ax = 0x350B;
-    PM_int386(0x21,&regs,&regs);
-    *total = regs.e.eax;
-
-    /* Get physical memory available */
-    *physical = _X32_getPhysMem();
-    if (*physical > *total)
-	*physical = *total;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Borland's DPMI32, Watcom DOS4GW and DJGPP DPMI support routines         */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DPMI32) || defined(DOS4GW) || defined(DJGPP)
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    return PM_mapPhysicalAddr(0x400,0xFFFF,true);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    return PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    VXD_regs    regs;
-
-#ifdef  DJGPP
-    /* Enable near pointers for DJGPP V2 */
-    __djgpp_nearptr_enable();
-#endif
-    /* If we have connected to our helper VxD in a Windows DOS box, use
-     * the helper VxD services to map memory instead of the DPMI services.
-     * We do this because the helper VxD can properly disable caching
-     * where necessary, which we can only do directly here if we are
-     * running at ring 0 (ie: under real DOS).
-     */
-    if (VXD_version == -1)
-	PM_init();
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_MAPPHYS);
-	regs.ebx = base;
-	regs.ecx = limit;
-	regs.edx = isCached;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return (void*)regs.eax;
-	}
-    return DPMI_mapPhysicalAddr(base,limit,isCached);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    /* Mapping cannot be freed */
-    (void)ptr;
-    (void)limit;
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    ulong   physAddr;
-    if (!PM_getPhysicalAddrRange(p,1,&physAddr))
-	return 0xFFFFFFFF;
-    return physAddr | ((ulong)p & 0xFFF);
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    VXD_regs    regs;
-    ulong       pte;
-    PMSREGS     sregs;
-    ulong       DSBaseAddr;
-
-    /* If we have connected to our helper VxD in a Windows DOS box, use the
-     * helper VxD services to find the physical address of an address.
-     */
-    if (VXD_version) {
-	memset(&regs,0,sizeof(regs));
-	regs.eax = API_NUM(PMHELP_GETPHYSICALADDRRANGE);
-	regs.ebx = (ulong)p;
-	regs.ecx = (ulong)length;
-	regs.edx = (ulong)physAddress;
-	_PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
-	return regs.eax;
-	}
-
-    /* Find base address for default DS selector */
-    PM_segread(&sregs);
-    DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
-
-    /* Otherwise directly access the page tables to determine the
-     * physical memory address. Note that we touch the memory before
-     * calling, otherwise the memory may not be paged in correctly.
-     */
-    pte = *((ulong*)p);
-#ifdef  DOS4GW
-    if (_PM_pagingEnabled() == 0) {
-	int     count;
-	ulong   linAddr = (ulong)p;
-
-	/* When paging is disabled physical=linear */
-	for (count = (length+0xFFF) >> 12; count > 0; count--) {
-	    *physAddress++ = linAddr;
-	    linAddr += 4096;
-	    }
-	return true;
-	}
-    else if ((PDB = _PM_getPDB()) != 0 && DSBaseAddr == 0) {
-	int     startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
-	ulong   pageTable,*pPageTable,linAddr = (ulong)p;
-	ulong   limit = length-1;
-
-	pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
-	if (pPDB) {
-	    startPDB = (linAddr >> 22) & 0x3FFL;
-	    startPage = (linAddr >> 12) & 0x3FFL;
-	    endPDB = ((linAddr+limit) >> 22) & 0x3FFL;
-	    endPage = ((linAddr+limit) >> 12) & 0x3FFL;
-	    for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
-		pageTable = pPDB[iPDB] & ~0xFFFL;
-		pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
-		start = (iPDB == startPDB) ? startPage : 0;
-		end = (iPDB == endPDB) ? endPage : 0x3FFL;
-		for (iPage = start; iPage <= end; iPage++)
-		    *physAddress++ = (pPageTable[iPage] & ~0xFFF);
-		}
-	    return true;
-	    }
-	}
-#endif
-    return false;
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
-    (void)limit;
-    return (void*)base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    static uchar *zeroPtr = NULL;
-
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
-    return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    PMREGS      r;
-    void        *p;
-
-    r.x.ax = 0x100;                 /* DPMI allocate DOS memory         */
-    r.x.bx = (size + 0xF) >> 4;     /* number of paragraphs             */
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return NULL;                /* DPMI call failed                 */
-    *r_seg = r.x.ax;                /* Real mode segment                */
-    *r_off = 0;
-    p = PM_mapRealPointer(*r_seg,*r_off);
-    _PM_addRealModeBlock(p,r.x.dx);
-    return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    PMREGS  r;
-
-    if (mem) {
-	r.x.ax = 0x101;                     /* DPMI free DOS memory         */
-	r.x.dx = _PM_findRealModeBlock(mem);/* DX := selector from 0x100    */
-	PM_int386(0x31, &r, &r);
-	}
-}
-
-static DPMI_handler_t   DPMI_int10 = NULL;
-
-void PMAPI DPMI_setInt10Handler(DPMI_handler_t handler)
-{
-    DPMI_int10 = handler;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    PMREGS      r;
-    PMSREGS     sr;
-
-    if (intno == 0x10 && DPMI_int10) {
-	if (DPMI_int10(regs))
-	    return;
-	}
-    PM_segread(&sr);
-    r.x.ax = 0x300;                 /* DPMI issue real interrupt    */
-    r.h.bl = intno;
-    r.h.bh = 0;
-    r.x.cx = 0;
-    sr.es = sr.ds;
-    r.e.edi = (uint)regs;
-    PM_int386x(0x31, &r, &r, &sr);  /* Issue the interrupt          */
-}
-
-#define IN(reg)     rmregs.reg = in->e.reg
-#define OUT(reg)    out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
-    DPMI_int86(intno,&rmregs);      /* DPMI issue real interrupt    */
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    rmregs.es = sregs->es;
-    rmregs.ds = sregs->ds;
-
-    DPMI_int86(intno,&rmregs);      /* DPMI issue real interrupt    */
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    sregs->es = rmregs.es;
-    sregs->cs = rmregs.cs;
-    sregs->ss = rmregs.ss;
-    sregs->ds = rmregs.ds;
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-#pragma pack(1)
-
-typedef struct {
-	uint    LargestBlockAvail;
-	uint    MaxUnlockedPage;
-	uint    LargestLockablePage;
-	uint    LinAddrSpace;
-	uint    NumFreePagesAvail;
-	uint    NumPhysicalPagesFree;
-	uint    TotalPhysicalPages;
-	uint    FreeLinAddrSpace;
-	uint    SizeOfPageFile;
-	uint    res[3];
-	} MemInfo;
-
-#pragma pack()
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    PMREGS  r;
-    PMSREGS sr;
-    MemInfo memInfo;
-
-    PM_segread(&sr);
-    r.x.ax = 0x500;                 /* DPMI get free memory info */
-    sr.es = sr.ds;
-    r.e.edi = (uint)&memInfo;
-    PM_int386x(0x31, &r, &r, &sr);  /* Issue the interrupt */
-    *physical = memInfo.NumPhysicalPagesFree * 4096;
-    *total = memInfo.LargestBlockAvail;
-    if (*total < *physical)
-	*physical = *total;
-}
-
-#endif
-
-#ifndef __16BIT__
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
-    int bank)
-{
-    DPMI_regs   regs;
-    memset(&regs, 0, sizeof(regs));
-    regs.eax = 0x4F05;
-    regs.ebx = 0x0000;
-    regs.edx = bank;
-    DPMI_int86(0x10,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
-    int bank)
-{
-    DPMI_regs   regs;
-    memset(&regs, 0, sizeof(regs));
-    regs.eax = 0x4F05;
-    regs.ebx = 0x0000;
-    regs.edx = bank;
-    DPMI_int86(0x10,&regs);
-    regs.eax = 0x4F05;
-    regs.ebx = 0x0001;
-    regs.edx = bank;
-    DPMI_int86(0x10,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
-    int x,
-    int y,
-    int waitVRT)
-{
-    DPMI_regs   regs;
-    memset(&regs, 0, sizeof(regs));
-    regs.eax = 0x4F07;
-    regs.ebx = waitVRT;
-    regs.ecx = x;
-    regs.edx = y;
-    DPMI_int86(0x10,&regs);
-}
-
-#endif
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    /* TODO: Implement this! */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c b/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c
deleted file mode 100644
index eecc2daede..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c
+++ /dev/null
@@ -1,1637 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  16/32 bit DOS
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-#ifndef REALMODE
-static int  globalDataStart;
-#endif
-
-PM_criticalHandler  _VARAPI _PM_critHandler = NULL;
-PM_breakHandler     _VARAPI _PM_breakHandler = NULL;
-PM_intHandler       _VARAPI _PM_timerHandler = NULL;
-PM_intHandler       _VARAPI _PM_rtcHandler = NULL;
-PM_intHandler       _VARAPI _PM_keyHandler = NULL;
-PM_key15Handler     _VARAPI _PM_key15Handler = NULL;
-PM_mouseHandler     _VARAPI _PM_mouseHandler = NULL;
-PM_intHandler       _VARAPI _PM_int10Handler = NULL;
-int                 _VARAPI _PM_mouseMask;
-
-uchar *     _VARAPI _PM_ctrlCPtr;               /* Location of Ctrl-C flag      */
-uchar *     _VARAPI _PM_ctrlBPtr;               /* Location of Ctrl-Break flag  */
-uchar *     _VARAPI _PM_critPtr;                /* Location of Critical error Bf*/
-PMFARPTR    _VARAPI _PM_prevTimer = PMNULL;     /* Previous timer handler       */
-PMFARPTR    _VARAPI _PM_prevRTC = PMNULL;       /* Previous RTC handler         */
-PMFARPTR    _VARAPI _PM_prevKey = PMNULL;       /* Previous key handler         */
-PMFARPTR    _VARAPI _PM_prevKey15 = PMNULL;     /* Previous key15 handler       */
-PMFARPTR    _VARAPI _PM_prevBreak = PMNULL;     /* Previous break handler       */
-PMFARPTR    _VARAPI _PM_prevCtrlC = PMNULL;     /* Previous CtrlC handler       */
-PMFARPTR    _VARAPI _PM_prevCritical = PMNULL;  /* Previous critical handler    */
-long        _VARAPI _PM_prevRealTimer;          /* Previous real mode timer     */
-long        _VARAPI _PM_prevRealRTC;            /* Previous real mode RTC       */
-long        _VARAPI _PM_prevRealKey;            /* Previous real mode key       */
-long        _VARAPI _PM_prevRealKey15;          /* Previous real mode key15     */
-long        _VARAPI _PM_prevRealInt10;          /* Previous real mode int 10h   */
-static uchar        _PM_oldCMOSRegA;            /* CMOS register A contents     */
-static uchar        _PM_oldCMOSRegB;            /* CMOS register B contents     */
-static uchar        _PM_oldRTCPIC2;             /* Mask value for RTC IRQ8      */
-
-/* Structure to maintain information about hardware interrupt handlers,
- * include a copy of the hardware IRQ assembler thunk (one for each
- * hooked interrupt handler).
- */
-
-typedef struct {
-    uchar       IRQ;
-    uchar       IRQVect;
-    uchar       prevPIC;
-    uchar       prevPIC2;
-    PMFARPTR    prevHandler;
-    long        prevRealhandler;
-    uchar       thunk[1];
-    /* IRQ assembler thunk follows ... */
-    } _PM_IRQHandle;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Globals for locking interrupt handlers in _pmdos.asm */
-
-#ifndef REALMODE
-extern int  _VARAPI _PM_pmdosDataStart;
-extern int  _VARAPI _PM_pmdosDataEnd;
-extern int  _VARAPI _PM_DMADataStart;
-extern int  _VARAPI _PM_DMADataEnd;
-void _ASMAPI _PM_pmdosCodeStart(void);
-void _ASMAPI _PM_pmdosCodeEnd(void);
-void _ASMAPI _PM_DMACodeStart(void);
-void _ASMAPI _PM_DMACodeEnd(void);
-#endif
-
-/* Protected mode interrupt handlers, also called by PM callbacks below */
-
-void _ASMAPI _PM_timerISR(void);
-void _ASMAPI _PM_rtcISR(void);
-void _ASMAPI _PM_irqISRTemplate(void);
-void _ASMAPI _PM_irqISRTemplateEnd(void);
-void _ASMAPI _PM_keyISR(void);
-void _ASMAPI _PM_key15ISR(void);
-void _ASMAPI _PM_breakISR(void);
-void _ASMAPI _PM_ctrlCISR(void);
-void _ASMAPI _PM_criticalISR(void);
-void _ASMAPI _PM_mouseISR(void);
-void _ASMAPI _PM_int10PMCB(void);
-
-/* Protected mode DPMI callback handlers */
-
-void _ASMAPI _PM_mousePMCB(void);
-
-/* Routine to install a mouse handler function */
-
-void _ASMAPI _PM_setMouseHandler(int mask);
-
-/* Routine to allocate DPMI real mode callback routines */
-
-ibool _ASMAPI _DPMI_allocateCallback(void (_ASMAPI *pmcode)(),void *rmregs,long *RMCB);
-void _ASMAPI _DPMI_freeCallback(long RMCB);
-
-/* DPMI helper functions in PMLITE.C */
-
-ulong   PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit);
-int     PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr);
-ulong   PMAPI DPMI_getSelectorBase(ushort sel);
-int     PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit);
-uint    PMAPI DPMI_createSelector(ulong base,ulong limit);
-void    PMAPI DPMI_freeSelector(uint sel);
-int     PMAPI DPMI_lockLinearPages(ulong linear,ulong len);
-int     PMAPI DPMI_unlockLinearPages(ulong linear,ulong len);
-
-/* Functions to read and write CMOS registers */
-
-uchar   PMAPI _PM_readCMOS(int index);
-void    PMAPI _PM_writeCMOS(int index,uchar value);
-
-/*-------------------------------------------------------------------------*/
-/* Generic routines common to all environments                             */
-/*-------------------------------------------------------------------------*/
-
-void PMAPI PM_resetMouseDriver(int hardReset)
-{
-    RMREGS          regs;
-    PM_mouseHandler oldHandler = _PM_mouseHandler;
-
-    PM_restoreMouseHandler();
-    regs.x.ax = hardReset ? 0 : 33;
-    PM_int86(0x33, &regs, &regs);
-    if (oldHandler)
-	PM_setMouseHandler(_PM_mouseMask, oldHandler);
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
-    static short convert[] = {
-	8192,
-	4096,
-	2048,
-	1024,
-	512,
-	256,
-	128,
-	64,
-	32,
-	16,
-	8,
-	4,
-	2,
-	-1,
-	};
-    int i;
-
-    /* First clear any pending RTC timeout if not cleared */
-    _PM_readCMOS(0x0C);
-    if (frequency == 0) {
-	/* Disable RTC timout */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
-	}
-    else {
-	/* Convert frequency value to RTC clock indexes */
-	for (i = 0; convert[i] != -1; i++) {
-	    if (convert[i] == frequency)
-		break;
-	    }
-
-	/* Set RTC timout value and enable timeout */
-	_PM_writeCMOS(0x0A,0x20 | (i+3));
-	_PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
-	}
-}
-
-#ifndef REALMODE
-
-static void PMAPI lockPMHandlers(void)
-{
-    static int      locked = 0;
-    int             stat;
-    PM_lockHandle   lh; /* Unused in DOS */
-
-    /* Lock all of the code and data used by our protected mode interrupt
-     * handling routines, so that it will continue to work correctly
-     * under real mode.
-     */
-    if (!locked) {
-	PM_saveDS();
-	stat  = !PM_lockDataPages(&globalDataStart-2048,4096,&lh);
-	stat |= !PM_lockDataPages(&_PM_pmdosDataStart,(int)&_PM_pmdosDataEnd - (int)&_PM_pmdosDataStart,&lh);
-	stat |= !PM_lockCodePages((__codePtr)_PM_pmdosCodeStart,(int)_PM_pmdosCodeEnd-(int)_PM_pmdosCodeStart,&lh);
-	stat |= !PM_lockDataPages(&_PM_DMADataStart,(int)&_PM_DMADataEnd - (int)&_PM_DMADataStart,&lh);
-	stat |= !PM_lockCodePages((__codePtr)_PM_DMACodeStart,(int)_PM_DMACodeEnd-(int)_PM_DMACodeStart,&lh);
-	if (stat) {
-	    printf("Page locking services failed - interrupt handling not safe!\n");
-	    exit(1);
-	    }
-	locked = 1;
-	}
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* DOS Real Mode support.                                                  */
-/*-------------------------------------------------------------------------*/
-
-#ifdef REALMODE
-
-#ifndef MK_FP
-#define MK_FP(s,o)  ( (void far *)( ((ulong)(s) << 16) + \
-		    (ulong)(o) ))
-#endif
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    PM_saveDS();
-    _PM_mouseHandler = mh;
-    _PM_setMouseHandler(_PM_mouseMask = mask);
-    return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    union REGS      regs;
-
-    if (_PM_mouseHandler) {
-	regs.x.ax = 33;
-	int86(0x33, &regs, &regs);
-	_PM_mouseHandler = NULL;
-	}
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
-    _PM_getRMvect(0x8, (long*)&_PM_prevTimer);
-    _PM_timerHandler = th;
-    _PM_setRMvect(0x8, (long)_PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
-    if (_PM_timerHandler) {
-	_PM_setRMvect(0x8, (long)_PM_prevTimer);
-	_PM_timerHandler = NULL;
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    _PM_getRMvect(0x70, (long*)&_PM_prevRTC);
-    _PM_rtcHandler = th;
-    _PM_setRMvect(0x70, (long)_PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
-	/* Restore the interrupt vector */
-	_PM_setRMvect(0x70, (long)_PM_prevRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
-    _PM_getRMvect(0x9, (long*)&_PM_prevKey);
-    _PM_keyHandler = kh;
-    _PM_setRMvect(0x9, (long)_PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
-    if (_PM_keyHandler) {
-	_PM_setRMvect(0x9, (long)_PM_prevKey);
-	_PM_keyHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
-    _PM_getRMvect(0x15, (long*)&_PM_prevKey15);
-    _PM_key15Handler = kh;
-    _PM_setRMvect(0x15, (long)_PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
-    if (_PM_key15Handler) {
-	_PM_setRMvect(0x15, (long)_PM_prevKey15);
-	_PM_key15Handler = NULL;
-	}
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-    static int  ctrlCFlag,ctrlBFlag;
-
-    _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
-    _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
-    _PM_getRMvect(0x1B, (long*)&_PM_prevBreak);
-    _PM_getRMvect(0x23, (long*)&_PM_prevCtrlC);
-    _PM_breakHandler = bh;
-    _PM_setRMvect(0x1B, (long)_PM_breakISR);
-    _PM_setRMvect(0x23, (long)_PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
-    PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
-    if (_PM_prevBreak) {
-	_PM_setRMvect(0x1B, (long)_PM_prevBreak);
-	_PM_setRMvect(0x23, (long)_PM_prevCtrlC);
-	_PM_prevBreak = NULL;
-	_PM_breakHandler = NULL;
-	}
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-    static  short critBuf[2];
-
-    _PM_critPtr = (uchar*)critBuf;
-    _PM_getRMvect(0x24, (long*)&_PM_prevCritical);
-    _PM_critHandler = ch;
-    _PM_setRMvect(0x24, (long)_PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
-    PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
-    if (_PM_prevCritical) {
-	_PM_setRMvect(0x24, (long)_PM_prevCritical);
-	_PM_prevCritical = NULL;
-	_PM_critHandler = NULL;
-	}
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;      /* Do nothing for real mode */
-    return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;      /* Do nothing for real mode */
-    return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;      /* Do nothing for real mode */
-    return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;      /* Do nothing for real mode */
-    return 1;
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    long t;
-    _PM_getRMvect(intno,&t);
-    *isr = (void*)t;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PM_saveDS();
-    _PM_setRMvect(intno,(long)isr);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    _PM_setRMvect(intno,(long)isr);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Phar Lap TNT DOS Extender support.                                      */
-/*-------------------------------------------------------------------------*/
-
-#ifdef TNT
-
-#include <pldos32.h>
-#include <pharlap.h>
-#include <hw386.h>
-
-static long prevRealBreak;      /* Previous real mode break handler     */
-static long prevRealCtrlC;      /* Previous real mode CtrlC handler     */
-static long prevRealCritical;   /* Prev real mode critical handler      */
-static uchar *mousePtr;
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static UCHAR realHandler[] = {      /* Real mode code generic handler   */
-    0x00,0x00,0x00,0x00,            /* __PM_callProtp                   */
-    0x00,0x00,                      /* __PM_protCS                      */
-    0x00,0x00,0x00,0x00,            /* __PM_protHandler                 */
-    0x66,0x60,                      /*  pushad                          */
-    0x1E,                           /*  push    ds                      */
-    0x6A,0x00,                      /*  push    0                       */
-    0x6A,0x00,                      /*  push    0                       */
-    0x2E,0xFF,0x36,0x04,0x00,       /*  push    [cs:__PM_protCS]        */
-    0x66,0x2E,0xFF,0x36,0x06,0x00,  /*  push    [cs:__PM_protHandler]   */
-    0x2E,0xFF,0x1E,0x00,0x00,       /*  call    [cs:__PM_callProtp]     */
-    0x83,0xC4,0x0A,                 /*  add     sp,10                   */
-    0x1F,                           /*  pop     ds                      */
-    0x66,0x61,                      /*  popad                           */
-    0xCB,                           /*  retf                            */
-    };
-
-/* The following functions installs the above realmode callback mechanism
- * in real mode memory for calling the protected mode routine.
- */
-
-uchar * installCallback(void (PMAPI *pmCB)(),uint *rseg, uint *roff)
-{
-    CONFIG_INF  config;
-    REALPTR     realBufAdr,callProtp;
-    ULONG       bufSize;
-    FARPTR      protBufAdr;
-    uchar       *p;
-
-    /* Get address of real mode routine to call up to protected mode    */
-    _dx_rmlink_get(&callProtp, &realBufAdr, &bufSize, &protBufAdr);
-    _dx_config_inf(&config, (UCHAR*)&config);
-
-    /* Fill in the values in the real mode code segment so that it will
-     * call the correct routine.
-     */
-    *((REALPTR*)&realHandler[0]) = callProtp;
-    *((USHORT*)&realHandler[4]) = config.c_cs_sel;
-    *((ULONG*)&realHandler[6]) = (ULONG)pmCB;
-
-    /* Copy the real mode handler to real mode memory   */
-    if ((p = PM_allocRealSeg(sizeof(realHandler),rseg,roff)) == NULL)
-	return NULL;
-    memcpy(p,realHandler,sizeof(realHandler));
-
-    /* Skip past global variabls in real mode code segment */
-    *roff += 0x0A;
-    return p;
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    RMREGS      regs;
-    RMSREGS     sregs;
-    uint        rseg,roff;
-
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    if ((mousePtr = installCallback(_PM_mouseISR, &rseg, &roff)) == NULL)
-	return 0;
-    _PM_mouseHandler = mh;
-
-    /* Install the real mode mouse handler  */
-    sregs.es = rseg;
-    regs.x.dx = roff;
-    regs.x.cx = _PM_mouseMask = mask;
-    regs.x.ax = 0xC;
-    PM_int86x(0x33, &regs, &regs, &sregs);
-    return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    RMREGS  regs;
-
-    if (_PM_mouseHandler) {
-	regs.x.ax = 33;
-	PM_int86(0x33, &regs, &regs);
-	PM_freeRealSeg(mousePtr);
-	_PM_mouseHandler = NULL;
-	}
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    FARPTR  ph;
-
-    _dx_pmiv_get(intno, &ph);
-    isr->sel = FP_SEL(ph);
-    isr->off = FP_OFF(ph);
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    CONFIG_INF  config;
-    FARPTR      ph;
-
-    PM_saveDS();
-    _dx_config_inf(&config, (UCHAR*)&config);
-    FP_SET(ph,(uint)isr,config.c_cs_sel);
-    _dx_pmiv_set(intno,ph);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    FARPTR  ph;
-
-    FP_SET(ph,isr.off,isr.sel);
-    _dx_pmiv_set(intno,ph);
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
-    PM_getPMvect(intno,pmisr);
-    _PM_getRMvect(intno, realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
-    _PM_setRMvect(intno,realisr);
-    PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (PMAPI *isr)())
-{
-    CONFIG_INF  config;
-    FARPTR      ph;
-
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    _dx_config_inf(&config, (UCHAR*)&config);
-    FP_SET(ph,(uint)isr,config.c_cs_sel);
-    _dx_apmiv_set(intno,ph);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
-    getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
-    _PM_timerHandler = th;
-    setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
-    if (_PM_timerHandler) {
-	restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
-	_PM_timerHandler = NULL;
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
-    _PM_rtcHandler = th;
-    setISR(0x70, _PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
-	/* Restore the interrupt vector */
-	restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
-    getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
-    _PM_keyHandler = kh;
-    setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
-    if (_PM_keyHandler) {
-	restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
-	_PM_keyHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
-    getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
-    _PM_key15Handler = kh;
-    setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
-    if (_PM_key15Handler) {
-	restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
-	_PM_key15Handler = NULL;
-	}
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-    static int  ctrlCFlag,ctrlBFlag;
-
-    _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
-    _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
-    getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
-    getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
-    _PM_breakHandler = bh;
-    setISR(0x1B, _PM_breakISR);
-    setISR(0x23, _PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
-    PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
-    if (_PM_prevBreak.sel) {
-	restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
-	restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
-	_PM_prevBreak.sel = 0;
-	_PM_breakHandler = NULL;
-	}
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-    static short    critBuf[2];
-
-    _PM_critPtr = (uchar*)critBuf;
-    getISR(0x24, &_PM_prevCritical, &prevRealCritical);
-    _PM_critHandler = ch;
-    setISR(0x24, _PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
-    PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
-    if (_PM_prevCritical.sel) {
-	restoreISR(0x24, _PM_prevCritical, prevRealCritical);
-	_PM_prevCritical.sel = 0;
-	_PM_critHandler = NULL;
-	}
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    return (_dx_lock_pgsn(p,len) == 0);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    return (_dx_ulock_pgsn(p,len) == 0);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    CONFIG_INF  config;
-    FARPTR      fp;
-
-    _dx_config_inf(&config, (UCHAR*)&config);
-    FP_SET(fp,p,config.c_cs_sel);
-    return (_dx_lock_pgs(fp,len) == 0);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    CONFIG_INF  config;
-    FARPTR      fp;
-
-    _dx_config_inf(&config, (UCHAR*)&config);
-    FP_SET(fp,p,config.c_cs_sel);
-    return (_dx_ulock_pgs(fp,len) == 0);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Symantec C++ DOSX and FlashTek X-32/X-32VM support                      */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOSX) || defined(X32VM)
-
-#ifdef  X32VM
-#include <x32.h>
-#endif
-
-static long prevRealBreak;      /* Previous real mode break handler     */
-static long prevRealCtrlC;      /* Previous real mode CtrlC handler     */
-static long prevRealCritical;   /* Prev real mode critical handler      */
-
-static uint mouseSel = 0,mouseOff;
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static char realHandler[] = {       /* Real mode code generic handler   */
-    0x00,0x00,0x00,0x00,            /* __PM_callProtp                   */
-    0x00,0x00,                      /* __PM_protCS                      */
-    0x00,0x00,0x00,0x00,            /* __PM_protHandler                 */
-    0x1E,                           /*  push    ds                      */
-    0x6A,0x00,                      /*  push    0                       */
-    0x6A,0x00,                      /*  push    0                       */
-    0x2E,0xFF,0x36,0x04,0x00,       /*  push    [cs:__PM_protCS]        */
-    0x66,0x2E,0xFF,0x36,0x06,0x00,  /*  push    [cs:__PM_protHandler]   */
-    0x2E,0xFF,0x1E,0x00,0x00,       /*  call    [cs:__PM_callProtp]     */
-    0x83,0xC4,0x0A,                 /*  add     sp,10                   */
-    0x1F,                           /*  pop     ds                      */
-    0xCB,                           /*  retf                            */
-    };
-
-/* The following functions installs the above realmode callback mechanism
- * in real mode memory for calling the protected mode routine.
- */
-
-int installCallback(void (PMAPI *pmCB)(),uint *psel, uint *poff,
-    uint *rseg, uint *roff)
-{
-    PMREGS          regs;
-    PMSREGS         sregs;
-
-    regs.x.ax = 0x250D;
-    PM_segread(&sregs);
-    PM_int386x(0x21,&regs,&regs,&sregs);    /* Get RM callback address  */
-
-    /* Fill in the values in the real mode code segment so that it will
-     * call the correct routine.
-     */
-    *((ulong*)&realHandler[0]) = regs.e.eax;
-    *((ushort*)&realHandler[4]) = sregs.cs;
-    *((ulong*)&realHandler[6]) = (ulong)pmCB;
-
-    /* Copy the real mode handler to real mode memory (only allocate the
-     * buffer once since we cant dealloate it with X32).
-     */
-    if (*psel == 0) {
-	if (!PM_allocRealSeg(sizeof(realHandler),psel,poff,rseg,roff))
-	    return 0;
-	}
-    PM_memcpyfn(*psel,*poff,realHandler,sizeof(realHandler));
-
-    /* Skip past global variables in real mode code segment */
-    *roff += 0x0A;
-    return 1;
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    RMREGS      regs;
-    RMSREGS     sregs;
-    uint    rseg,roff;
-
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    if (!installCallback(_PM_mouseISR, &mouseSel, &mouseOff, &rseg, &roff))
-	return 0;
-    _PM_mouseHandler = mh;
-
-    /* Install the real mode mouse handler  */
-    sregs.es = rseg;
-    regs.x.dx = roff;
-    regs.x.cx = _PM_mouseMask = mask;
-    regs.x.ax = 0xC;
-    PM_int86x(0x33, &regs, &regs, &sregs);
-    return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    RMREGS  regs;
-
-    if (_PM_mouseHandler) {
-	regs.x.ax = 33;
-	PM_int86(0x33, &regs, &regs);
-	_PM_mouseHandler = NULL;
-	}
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_segread(&sregs);
-    regs.x.ax = 0x2502;         /* Get PM interrupt vector              */
-    regs.x.cx = intno;
-    PM_int386x(0x21, &regs, &regs, &sregs);
-    isr->sel = sregs.es;
-    isr->off = regs.e.ebx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PMFARPTR    pmisr;
-    PMSREGS     sregs;
-
-    PM_saveDS();
-    PM_segread(&sregs);
-    pmisr.sel = sregs.cs;
-    pmisr.off = (uint)isr;
-    PM_restorePMvect(intno, pmisr);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_segread(&sregs);
-    regs.x.ax = 0x2505;         /* Set PM interrupt vector              */
-    regs.x.cx = intno;
-    sregs.ds = isr.sel;
-    regs.e.edx = isr.off;
-    PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
-    PM_getPMvect(intno,pmisr);
-    _PM_getRMvect(intno,realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_segread(&sregs);
-    regs.x.ax = 0x2507;         /* Set real and PM vectors              */
-    regs.x.cx = intno;
-    sregs.ds = pmisr.sel;
-    regs.e.edx = pmisr.off;
-    regs.e.ebx = realisr;
-    PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-static void setISR(int intno, void *isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    lockPMHandlers();           /* Ensure our handlers are locked       */
-
-    PM_segread(&sregs);
-    regs.x.ax = 0x2506;         /* Hook real and protected vectors      */
-    regs.x.cx = intno;
-    sregs.ds = sregs.cs;
-    regs.e.edx = (uint)isr;
-    PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
-    getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
-    _PM_timerHandler = th;
-    setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
-    if (_PM_timerHandler) {
-	restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
-	_PM_timerHandler = NULL;
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
-    _PM_rtcHandler = th;
-    setISR(0x70, _PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
-	/* Restore the interrupt vector */
-	restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
-    getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
-    _PM_keyHandler = kh;
-    setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
-    if (_PM_keyHandler) {
-	restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
-	_PM_keyHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
-    getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
-    _PM_key15Handler = kh;
-    setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
-    if (_PM_key15Handler) {
-	restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
-	_PM_key15Handler = NULL;
-	}
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-    static int  ctrlCFlag,ctrlBFlag;
-
-    _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
-    _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
-    getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
-    getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
-    _PM_breakHandler = bh;
-    setISR(0x1B, _PM_breakISR);
-    setISR(0x23, _PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
-    PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
-    if (_PM_prevBreak.sel) {
-	restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
-	restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
-	_PM_prevBreak.sel = 0;
-	_PM_breakHandler = NULL;
-	}
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-    static short    critBuf[2];
-
-    _PM_critPtr = (uchar*)critBuf;
-    getISR(0x24, &_PM_prevCritical, &prevRealCritical);
-    _PM_critHandler = ch;
-    setISR(0x24, _PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
-    PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
-    if (_PM_prevCritical.sel) {
-	restoreISR(0x24, _PM_prevCritical, prevRealCritical);
-	_PM_prevCritical.sel = 0;
-	_PM_critHandler = NULL;
-	}
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    return (_x386_memlock(p,len) == 0);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    return (_x386_memunlock(p,len) == 0);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    return (_x386_memlock(p,len) == 0);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    return (_x386_memunlock(p,len) == 0);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Borland's DPMI32 DOS Power Pack Extender support.                       */
-/*-------------------------------------------------------------------------*/
-
-#ifdef  DPMI32
-#define GENERIC_DPMI32          /* Use generic 32 bit DPMI routines */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x204;
-    regs.h.bl = intno;
-    PM_int386(0x31,&regs,&regs);
-    isr->sel = regs.x.cx;
-    isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PMSREGS sregs;
-    PMREGS  regs;
-
-    PM_saveDS();
-    regs.x.ax = 0x205;          /* Set protected mode vector        */
-    regs.h.bl = intno;
-    PM_segread(&sregs);
-    regs.x.cx = sregs.cs;
-    regs.e.edx = (uint)isr;
-    PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x205;
-    regs.h.bl = intno;
-    regs.x.cx = isr.sel;
-    regs.e.edx = isr.off;
-    PM_int386(0x31,&regs,&regs);
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Watcom C/C++ with Rational DOS/4GW support.                             */
-/*-------------------------------------------------------------------------*/
-
-#ifdef  DOS4GW
-#define GENERIC_DPMI32          /* Use generic 32 bit DPMI routines */
-
-#define MOUSE_SUPPORTED         /* DOS4GW directly supports mouse   */
-
-/* We use the normal DOS services to save and restore interrupts handlers
- * for Watcom C++, because using the direct DPMI functions does not
- * appear to work properly. At least if we use the DPMI functions, we
- * dont get the auto-passup feature that we need to correctly trap
- * real and protected mode interrupts without installing Bi-model
- * interrupt handlers.
- */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_segread(&sregs);
-    regs.h.ah = 0x35;
-    regs.h.al = intno;
-    PM_int386x(0x21,&regs,&regs,&sregs);
-    isr->sel = sregs.es;
-    isr->off = regs.e.ebx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_saveDS();
-    PM_segread(&sregs);
-    regs.h.ah = 0x25;
-    regs.h.al = intno;
-    sregs.ds = sregs.cs;
-    regs.e.edx = (uint)isr;
-    PM_int386x(0x21,&regs,&regs,&sregs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    PMREGS  regs;
-    PMSREGS sregs;
-
-    PM_segread(&sregs);
-    regs.h.ah = 0x25;
-    regs.h.al = intno;
-    sregs.ds = isr.sel;
-    regs.e.edx = isr.off;
-    PM_int386x(0x21,&regs,&regs,&sregs);
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    _PM_mouseHandler = mh;
-    _PM_setMouseHandler(_PM_mouseMask = mask);
-    return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    PMREGS  regs;
-
-    if (_PM_mouseHandler) {
-	regs.x.ax = 33;
-	PM_int386(0x33, &regs, &regs);
-	_PM_mouseHandler = NULL;
-	}
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* DJGPP port of GNU C++ support.                                          */
-/*-------------------------------------------------------------------------*/
-
-#ifdef DJGPP
-#define GENERIC_DPMI32          /* Use generic 32 bit DPMI routines */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x204;
-    regs.h.bl = intno;
-    PM_int386(0x31,&regs,&regs);
-    isr->sel = regs.x.cx;
-    isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PMSREGS sregs;
-    PMREGS  regs;
-
-    PM_saveDS();
-    regs.x.ax = 0x205;          /* Set protected mode vector        */
-    regs.h.bl = intno;
-    PM_segread(&sregs);
-    regs.x.cx = sregs.cs;
-    regs.e.edx = (uint)isr;
-    PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x205;
-    regs.h.bl = intno;
-    regs.x.cx = isr.sel;
-    regs.e.edx = isr.off;
-    PM_int386(0x31,&regs,&regs);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Generic 32 bit DPMI routines                                            */
-/*-------------------------------------------------------------------------*/
-
-#if defined(GENERIC_DPMI32)
-
-static long prevRealBreak;      /* Previous real mode break handler     */
-static long prevRealCtrlC;      /* Previous real mode CtrlC handler     */
-static long prevRealCritical;   /* Prev real mode critical handler      */
-
-#ifndef MOUSE_SUPPORTED
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static long mouseRMCB;          /* Mouse real mode callback address     */
-static uchar *mousePtr;
-static char mouseRegs[0x32];    /* Real mode regs for mouse callback    */
-static uchar mouseHandler[] = {
-    0x00,0x00,0x00,0x00,        /* _realRMCB                            */
-    0x2E,0xFF,0x1E,0x00,0x00,   /*  call    [cs:_realRMCB]              */
-    0xCB,                       /*  retf                                */
-    };
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    RMREGS      regs;
-    RMSREGS     sregs;
-    uint        rseg,roff;
-
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    /* Copy the real mode handler to real mode memory   */
-    if ((mousePtr = PM_allocRealSeg(sizeof(mouseHandler),&rseg,&roff)) == NULL)
-	return 0;
-    memcpy(mousePtr,mouseHandler,sizeof(mouseHandler));
-    if (!_DPMI_allocateCallback(_PM_mousePMCB, mouseRegs, &mouseRMCB))
-	PM_fatalError("Unable to allocate real mode callback!\n");
-    PM_setLong(mousePtr,mouseRMCB);
-
-    /* Install the real mode mouse handler  */
-    _PM_mouseHandler = mh;
-    sregs.es = rseg;
-    regs.x.dx = roff+4;
-    regs.x.cx = _PM_mouseMask = mask;
-    regs.x.ax = 0xC;
-    PM_int86x(0x33, &regs, &regs, &sregs);
-    return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    RMREGS  regs;
-
-    if (_PM_mouseHandler) {
-	regs.x.ax = 33;
-	PM_int86(0x33, &regs, &regs);
-	PM_freeRealSeg(mousePtr);
-	_DPMI_freeCallback(mouseRMCB);
-	_PM_mouseHandler = NULL;
-	}
-}
-
-#endif
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
-    PM_getPMvect(intno,pmisr);
-    _PM_getRMvect(intno,realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
-    _PM_setRMvect(intno,realisr);
-    PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (* PMAPI pmisr)())
-{
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-    PM_setPMvect(intno,pmisr);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
-    getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
-    _PM_timerHandler = th;
-    setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
-    if (_PM_timerHandler) {
-	restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
-	_PM_timerHandler = NULL;
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
-    _PM_rtcHandler = th;
-    setISR(0x70, _PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
-	/* Restore the interrupt vector */
-	restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
-
-PM_IRQHandle PMAPI PM_setIRQHandler(
-    int IRQ,
-    PM_irqHandler ih)
-{
-    int             thunkSize,PICmask,chainPrevious;
-    ulong           offsetAdjust;
-    _PM_IRQHandle   *handle;
-
-    thunkSize = (ulong)_PM_irqISRTemplateEnd - (ulong)_PM_irqISRTemplate;
-    if ((handle = PM_malloc(sizeof(_PM_IRQHandle) + thunkSize)) == NULL)
-	return NULL;
-    handle->IRQ = IRQ;
-    handle->prevPIC = PM_inpb(0x21);
-    handle->prevPIC2 = PM_inpb(0xA1);
-    if (IRQ < 8) {
-	handle->IRQVect = (IRQ + 8);
-	PICmask = (1 << IRQ);
-	chainPrevious = ((handle->prevPIC & PICmask) == 0);
-	}
-    else {
-	handle->IRQVect = (0x60 + IRQ + 8);
-	PICmask = ((1 << IRQ) | 0x4);
-	chainPrevious = ((handle->prevPIC2 & (PICmask >> 8)) == 0);
-	}
-
-    /* Copy and setup the assembler thunk */
-    offsetAdjust = (ulong)handle->thunk - (ulong)_PM_irqISRTemplate;
-    memcpy(handle->thunk,_PM_irqISRTemplate,thunkSize);
-    *((ulong*)&handle->thunk[2]) = offsetAdjust;
-    *((ulong*)&handle->thunk[11+0]) = (ulong)ih;
-    if (chainPrevious) {
-	*((ulong*)&handle->thunk[11+4]) = handle->prevHandler.off;
-	*((ulong*)&handle->thunk[11+8]) = handle->prevHandler.sel;
-	}
-    else {
-	*((ulong*)&handle->thunk[11+4]) = 0;
-	*((ulong*)&handle->thunk[11+8]) = 0;
-	}
-    *((ulong*)&handle->thunk[11+12]) = IRQ;
-
-    /* Set the real time clock interrupt handler */
-    getISR(handle->IRQVect, &handle->prevHandler, &handle->prevRealhandler);
-    setISR(handle->IRQVect, (PM_intHandler)handle->thunk);
-
-    /* Unmask the IRQ in the PIC */
-    PM_outpb(0xA1,handle->prevPIC2 & ~(PICmask >> 8));
-    PM_outpb(0x21,handle->prevPIC & ~PICmask);
-    return handle;
-}
-
-void PMAPI PM_restoreIRQHandler(
-    PM_IRQHandle irqHandle)
-{
-    int             PICmask;
-    _PM_IRQHandle   *handle = irqHandle;
-
-    /* Restore PIC mask for the interrupt */
-    if (handle->IRQ < 8)
-	PICmask = (1 << handle->IRQ);
-    else
-	PICmask = ((1 << handle->IRQ) | 0x4);
-    PM_outpb(0xA1,(PM_inpb(0xA1) & ~(PICmask >> 8)) | (handle->prevPIC2 & (PICmask >> 8)));
-    PM_outpb(0x21,(PM_inpb(0x21) & ~PICmask) | (handle->prevPIC & PICmask));
-
-    /* Restore the interrupt vector */
-    restoreISR(handle->IRQVect, handle->prevHandler, handle->prevRealhandler);
-
-    /* Finally free the thunk */
-    PM_free(handle);
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
-    getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
-    _PM_keyHandler = kh;
-    setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
-    if (_PM_keyHandler) {
-	restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
-	_PM_keyHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
-    getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
-    _PM_key15Handler = kh;
-    setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
-    if (_PM_key15Handler) {
-	restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
-	_PM_key15Handler = NULL;
-	}
-}
-
-/* Real mode Ctrl-C and Ctrl-Break handler. This handler simply sets a
- * flag in the real mode code segment and exit. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-#ifndef DOS4GW
-static uchar ctrlHandler[] = {
-    0x00,0x00,0x00,0x00,            /*  ctrlBFlag                       */
-    0x66,0x2E,0xC7,0x06,0x00,0x00,
-    0x01,0x00,0x00,0x00,            /*  mov     [cs:ctrlBFlag],1        */
-    0xCF,                           /*  iretf                           */
-    };
-#endif
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-#ifndef DOS4GW
-    uint    rseg,roff;
-#else
-    static int  ctrlCFlag,ctrlBFlag;
-
-    _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
-    _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
-#endif
-
-    getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
-    getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
-    _PM_breakHandler = bh;
-    setISR(0x1B, _PM_breakISR);
-    setISR(0x23, _PM_ctrlCISR);
-
-#ifndef DOS4GW
-    /* Hook the real mode vectors for these handlers, as these are not
-     * normally reflected by the DPMI server up to protected mode
-     */
-    _PM_ctrlBPtr = PM_allocRealSeg(sizeof(ctrlHandler)*2, &rseg, &roff);
-    memcpy(_PM_ctrlBPtr,ctrlHandler,sizeof(ctrlHandler));
-    memcpy(_PM_ctrlBPtr+sizeof(ctrlHandler),ctrlHandler,sizeof(ctrlHandler));
-    _PM_ctrlCPtr = _PM_ctrlBPtr + sizeof(ctrlHandler);
-    _PM_setRMvect(0x1B,((long)rseg << 16) | (roff+4));
-    _PM_setRMvect(0x23,((long)rseg << 16) | (roff+sizeof(ctrlHandler)+4));
-#endif
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
-    PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
-    if (_PM_prevBreak.sel) {
-	restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
-	restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
-	_PM_prevBreak.sel = 0;
-	_PM_breakHandler = NULL;
-#ifndef DOS4GW
-	PM_freeRealSeg(_PM_ctrlBPtr);
-#endif
-	}
-}
-
-/* Real mode Critical Error handler. This handler simply saves the AX and
- * DI values in the real mode code segment and exits. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-#ifndef DOS4GW
-static uchar criticalHandler[] = {
-    0x00,0x00,                      /*  axCode                          */
-    0x00,0x00,                      /*  diCode                          */
-    0x2E,0xA3,0x00,0x00,            /*  mov     [cs:axCode],ax          */
-    0x2E,0x89,0x3E,0x02,0x00,       /*  mov     [cs:diCode],di          */
-    0xB8,0x03,0x00,                 /*  mov     ax,3                    */
-    0xCF,                           /*  iretf                           */
-    };
-#endif
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-#ifndef DOS4GW
-    uint    rseg,roff;
-#else
-    static  short   critBuf[2];
-
-    _PM_critPtr = (uchar*)critBuf;
-#endif
-
-    getISR(0x24, &_PM_prevCritical, &prevRealCritical);
-    _PM_critHandler = ch;
-    setISR(0x24, _PM_criticalISR);
-
-#ifndef DOS4GW
-    /* Hook the real mode vector, as this is not normally reflected by the
-     * DPMI server up to protected mode.
-     */
-    _PM_critPtr = PM_allocRealSeg(sizeof(criticalHandler)*2, &rseg, &roff);
-    memcpy(_PM_critPtr,criticalHandler,sizeof(criticalHandler));
-    _PM_setRMvect(0x24,((long)rseg << 16) | (roff+4));
-#endif
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
-    PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
-    if (_PM_prevCritical.sel) {
-	restoreISR(0x24, _PM_prevCritical, prevRealCritical);
-	PM_freeRealSeg(_PM_critPtr);
-	_PM_prevCritical.sel = 0;
-	_PM_critHandler = NULL;
-	}
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.cs),len);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.cs),len);
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c
deleted file mode 100644
index c3e9b6c33f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit DOS
-*
-* Description:  Main C module for the VFlat framebuffer routines. The page
-*               fault handler is always installed to handle up to a 4Mb
-*               framebuffer with a window size of 4Kb or 64Kb in size.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdlib.h>
-#include <dos.h>
-
-/*-------------------------------------------------------------------------*/
-/* DOS4G/W, PMODE/W and CauseWay support.                                  */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOS4GW)
-
-#define VFLAT_START_ADDR    0xF0000000U
-#define VFLAT_END_ADDR      0xF03FFFFFU
-#define VFLAT_LIMIT         (VFLAT_END_ADDR - VFLAT_START_ADDR)
-#define PAGE_PRESENT        1
-#define PAGE_NOTPRESENT     0
-#define PAGE_READ           0
-#define PAGE_WRITE          2
-
-PRIVATE ibool   installed = false;
-PRIVATE ibool   haveDPMI = false;
-PUBLIC  ibool   _ASMAPI VF_haveCauseWay = false;
-PUBLIC  uchar * _ASMAPI VF_zeroPtr = NULL;
-
-/* Low level assembler code */
-
-int     _ASMAPI InitPaging(void);
-void    _ASMAPI ClosePaging(void);
-void    _ASMAPI MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-void    _ASMAPI InstallFaultHandler(ulong baseAddr,int bankSize);
-void    _ASMAPI RemoveFaultHandler(void);
-void    _ASMAPI InstallBankFunc(int codeLen,void *bankFunc);
-
-void * _ASMAPI VF_malloc(uint size)
-{ return PM_malloc(size); }
-
-void _ASMAPI VF_free(void *p)
-{ PM_free(p); }
-
-PRIVATE ibool CheckDPMI(void)
-/****************************************************************************
-*
-* Function:     CheckDPMI
-* Returns:      True if we are running under DPMI
-*
-****************************************************************************/
-{
-    PMREGS  regs;
-
-    if (haveDPMI)
-	return true;
-
-    /* Check if we are running under DPMI in which case we will not be
-     * able to install our page fault handlers. We can however use the
-     * DVA.386 or VFLATD.386 virtual device drivers if they are present.
-     */
-    regs.x.ax = 0xFF00;
-    PM_int386(0x31,&regs,&regs);
-    if (!regs.x.cflag && (regs.e.edi & 8))
-	return (haveDPMI = true);
-    return false;
-}
-
-ibool PMAPI VF_available(void)
-/****************************************************************************
-*
-* Function:     VF_available
-* Returns:      True if virtual buffer is available, false if not.
-*
-****************************************************************************/
-{
-    if (!VF_zeroPtr)
-	VF_zeroPtr = PM_mapPhysicalAddr(0,0xFFFFFFFF,true);
-    if (CheckDPMI())
-	return false;
-
-    /* Standard DOS4GW, PMODE/W and Causeway */
-    if (InitPaging() == -1)
-	return false;
-    ClosePaging();
-    return true;
-}
-
-void * PMAPI InitDPMI(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function:     InitDOS4GW
-* Parameters:   baseAddr    - Base address of framebuffer bank window
-*               bankSize    - Physical size of banks in Kb (4 or 64)
-*               codeLen     - Length of 32 bit bank switch function
-*               bankFunc    - Pointer to protected mode bank function
-* Returns:      Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description:  Installs the virtual linear framebuffer handling for
-*               DPMI environments. This requires the DVA.386 or VFLATD.386
-*               virtual device drivers to be installed and functioning.
-*
-****************************************************************************/
-{
-    (void)baseAddr;
-    (void)bankSize;
-    (void)codeLen;
-    (void)bankFunc;
-    return NULL;
-}
-
-void * PMAPI InitDOS4GW(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function:     InitDOS4GW
-* Parameters:   baseAddr    - Base address of framebuffer bank window
-*               bankSize    - Physical size of banks in Kb (4 or 64)
-*               codeLen     - Length of 32 bit bank switch function
-*               bankFunc    - Pointer to protected mode bank function
-* Returns:      Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description:  Installs the virtual linear framebuffer handling for
-*               the DOS4GW extender.
-*
-****************************************************************************/
-{
-    int     i;
-
-    if (InitPaging() == -1)
-	return NULL;            /* Cannot do hardware paging!       */
-
-    /* Map 4MB of video memory into linear address space (read/write) */
-    if (bankSize == 64) {
-	for (i = 0; i < 64; i++) {
-	    MapPhysical2Linear(baseAddr,VFLAT_START_ADDR+(i<<16),16,
-		PAGE_WRITE | PAGE_NOTPRESENT);
-	    }
-	}
-    else {
-	for (i = 0; i < 1024; i++) {
-	    MapPhysical2Linear(baseAddr,VFLAT_START_ADDR+(i<<12),1,
-		PAGE_WRITE | PAGE_NOTPRESENT);
-	    }
-	}
-
-    /* Install our page fault handler and banks switch function */
-    InstallFaultHandler(baseAddr,bankSize);
-    InstallBankFunc(codeLen,bankFunc);
-    installed = true;
-    return (void*)VFLAT_START_ADDR;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function:     VF_init
-* Parameters:   baseAddr    - Base address of framebuffer bank window
-*               bankSize    - Physical size of banks in Kb (4 or 64)
-*               codeLen     - Length of 32 bit bank switch function
-*               bankFunc    - Pointer to protected mode bank function
-* Returns:      Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description:  Installs the virtual linear framebuffer handling.
-*
-****************************************************************************/
-{
-    if (installed)
-	return (void*)VFLAT_START_ADDR;
-    if (codeLen > 100)
-	return NULL;                /* Bank function is too large!      */
-    if (!VF_zeroPtr)
-	VF_zeroPtr = PM_mapPhysicalAddr(0,0xFFFFFFFF,true);
-    if (CheckDPMI())
-	return InitDPMI(baseAddr,bankSize,codeLen,bankFunc);
-    return InitDOS4GW(baseAddr,bankSize,codeLen,bankFunc);
-}
-
-void PMAPI VF_exit(void)
-/****************************************************************************
-*
-* Function:     VF_exit
-*
-* Description:  Closes down the virtual framebuffer services and
-*               restores the previous page fault handler.
-*
-****************************************************************************/
-{
-    if (installed) {
-	if (haveDPMI) {
-	    /* DPMI support */
-	    }
-	else {
-	    /* Standard DOS4GW and PMODE/W support */
-	    RemoveFaultHandler();
-	    ClosePaging();
-	    }
-	installed = false;
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-/* Support mapped out for other compilers.                                 */
-/*-------------------------------------------------------------------------*/
-
-#else
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    (void)baseAddr;
-    (void)bankSize;
-    (void)codeLen;
-    (void)bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c
deleted file mode 100644
index 53ab16cf40..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  MSDOS
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-
-/*---------------------------- Global variables ---------------------------*/
-
-uchar * _VARAPI _ZTimerBIOSPtr;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-void    _ASMAPI LZ_timerOn(void);
-ulong   _ASMAPI LZ_timerLap(void);
-void    _ASMAPI LZ_timerOff(void);
-ulong   _ASMAPI LZ_timerCount(void);
-void    _ASMAPI LZ_disable(void);
-void    _ASMAPI LZ_enable(void);
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-    _ZTimerBIOSPtr = PM_getBIOSPointer();
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm)     LZ_timerOn()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerLap(tm)        LZ_timerLap()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)        LZ_timerOff()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm)  LZ_timerCount()
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     54925
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    ulong   ticks;
-    LZ_disable();            /* Turn of interrupts               */
-    ticks = PM_getLong(_ZTimerBIOSPtr+0x6C);
-    LZ_enable();             /* Turn on interrupts again         */
-    return ticks;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{
-    if (finish < start)
-	finish += 1573040L;         /* Number of ticks in 24 hours      */
-    return finish - start;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/event.c b/board/MAI/bios_emulator/scitech/src/pm/event.c
deleted file mode 100644
index b6f458654b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/event.c
+++ /dev/null
@@ -1,1115 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Main implementation for the SciTech cross platform event
-*               library. This module contains all the generic cross platform
-*               code, and pulls in modules specific to each target OS
-*               environment.
-*
-****************************************************************************/
-
-#include "event.h"
-#include "pmapi.h"
-#include <time.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define EVENTQSIZE      100     /* Number of events in event queue      */
-#define JOY_NUM_AXES    4       /* Number of joystick axes supported    */
-
-static struct {
-    int         mx,my;              /* Current mouse position           */
-    int         head;               /* Head of event queue              */
-    int         tail;               /* Tail of event queue              */
-    int         freeHead;           /* Head of free list                */
-    int         count;              /* No. of items currently in queue  */
-    event_t     evtq[EVENTQSIZE];   /* The queue structure itself       */
-    int         oldMove;            /* Previous movement event          */
-    int         oldKey;             /* Previous key repeat event        */
-    int         oldJoyMove;         /* Previous joystick movement event */
-    int         joyMask;            /* Mask of joystick axes present    */
-    int         joyMin[JOY_NUM_AXES];
-    int         joyCenter[JOY_NUM_AXES];
-    int         joyMax[JOY_NUM_AXES];
-    int         joyPrev[JOY_NUM_AXES];
-    int         joyButState;
-    ulong       doubleClick;
-    ulong       autoRepeat;
-    ulong       autoDelay;
-    ulong       autoTicks;
-    ulong       doubleClickThresh;
-    ulong       firstAuto;
-    int         autoMouse_x;
-    int         autoMouse_y;
-    event_t     downMouse;
-    ulong       keyModifiers;       /* Current keyboard modifiers       */
-    uchar       keyTable[128];      /* Table of key up/down flags       */
-    ibool       allowLEDS;          /* True if LEDS should change       */
-    _EVT_userEventFilter    userEventCallback;
-    _EVT_mouseMoveHandler   mouseMove;
-    _EVT_heartBeatCallback  heartBeat;
-    void                    *heartBeatParams;
-    codepage_t              *codePage;
-    } EVT;
-
-/*---------------------------- Implementation -----------------------------*/
-
-#if defined(__REALDOS__) || defined(__SMX32__)
-/* {secret} */
-void EVTAPI _EVT_cCodeStart(void) {}
-#endif
-
-/* External assembler functions */
-
-int EVTAPI _EVT_readJoyAxis(int mask,int *axis);
-int EVTAPI _EVT_readJoyButtons(void);
-
-/* Forward declaration */
-
-ulong _EVT_getTicks(void);
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to add to the event queue
-
-REMARKS:
-Adds an event to the event queue by tacking it onto the tail of the event
-queue. This routine assumes that at least one spot is available on the
-freeList for the event to be inserted.
-
-NOTE:   Interrupts MUST be OFF while this routine is called to ensure we have
-	mutually exclusive access to our internal data structures for
-	interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addEvent(
-    event_t *evt)
-{
-    int evtID;
-
-    /* Check for mouse double click events */
-    if (evt->what & EVT_MOUSEEVT) {
-	EVT.autoMouse_x = evt->where_x;
-	EVT.autoMouse_y = evt->where_y;
-	if ((evt->what & EVT_MOUSEDOWN) && !(evt->message & EVT_DBLCLICK)) {
-	    /* Determine if the last mouse event was a double click event */
-	    uint diff_x = ABS(evt->where_x - EVT.downMouse.where_x);
-	    uint diff_y = ABS(evt->where_y - EVT.downMouse.where_y);
-	    if ((evt->message == EVT.downMouse.message)
-		&& ((evt->when - EVT.downMouse.when) <= EVT.doubleClick)
-		&& (diff_x <= EVT.doubleClickThresh)
-		&& (diff_y <= EVT.doubleClickThresh)) {
-		evt->message |= EVT_DBLCLICK;
-		EVT.downMouse = *evt;
-		EVT.downMouse.when = 0;
-		}
-	    else
-		EVT.downMouse = *evt;
-	    EVT.autoTicks = _EVT_getTicks();
-	    }
-	else if (evt->what & EVT_MOUSEUP) {
-	    EVT.downMouse.what = EVT_NULLEVT;
-	    EVT.firstAuto = true;
-	    }
-	}
-
-    /* Call user supplied callback to modify the event if desired */
-    if (EVT.userEventCallback) {
-	if (!EVT.userEventCallback(evt))
-	    return;
-	}
-
-    /* Get spot to place the event from the free list */
-    evtID = EVT.freeHead;
-    EVT.freeHead = EVT.evtq[EVT.freeHead].next;
-
-    /* Add to the EVT.tail of the event queue   */
-    evt->next = -1;
-    evt->prev = EVT.tail;
-    if (EVT.tail != -1)
-	EVT.evtq[EVT.tail].next = evtID;
-    else
-	EVT.head = evtID;
-    EVT.tail = evtID;
-    EVT.evtq[evtID] = *evt;
-    EVT.count++;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to initialise the event queue to the empty state.
-****************************************************************************/
-static void initEventQueue(void)
-{
-    int i;
-
-    /* Build free list, and initialize global data structures */
-    for (i = 0; i < EVENTQSIZE; i++)
-	EVT.evtq[i].next = i+1;
-    EVT.evtq[EVENTQSIZE-1].next = -1;       /* Terminate list           */
-    EVT.count = EVT.freeHead = 0;
-    EVT.head = EVT.tail = -1;
-    EVT.oldMove = -1;
-    EVT.oldKey = -1;
-    EVT.oldJoyMove = -1;
-    EVT.joyButState = 0;
-    EVT.mx = EVT.my = 0;
-    EVT.keyModifiers = 0;
-    EVT.allowLEDS = true;
-
-    /* Set default values for mouse double click and mouse auto events */
-    EVT.doubleClick = 440;
-    EVT.autoRepeat = 55;
-    EVT.autoDelay = 330;
-    EVT.autoTicks = 0;
-    EVT.doubleClickThresh = 5;
-    EVT.firstAuto = true;
-    EVT.autoMouse_x = EVT.autoMouse_y = 0;
-    memset(&EVT.downMouse,0,sizeof(EVT.downMouse));
-
-    /* Setup default pointers for event library */
-    EVT.userEventCallback = NULL;
-    EVT.codePage = &_CP_US_English;
-
-    /* Initialise the joystick module and do basic calibration (which assumes
-     * the joystick is centered.
-     */
-    EVT.joyMask = EVT_joyIsPresent();
-}
-
-#if defined(NEED_SCALE_JOY_AXIS) || !defined(USE_OS_JOYSTICK)
-/****************************************************************************
-REMARKS:
-This function scales a joystick axis value to normalised form.
-****************************************************************************/
-static int scaleJoyAxis(
-    int raw,
-    int axis)
-{
-    int scaled,range;
-
-    /* Make sure the joystick is calibrated properly */
-    if (EVT.joyCenter[axis] - EVT.joyMin[axis] < 5)
-	return raw;
-    if (EVT.joyMax[axis] - EVT.joyCenter[axis] < 5)
-	return raw;
-
-    /* Now scale the coordinates to -128 to 127 */
-    raw -= EVT.joyCenter[axis];
-    if (raw < 0)
-	range = EVT.joyCenter[axis]-EVT.joyMin[axis];
-    else
-	range = EVT.joyMax[axis]-EVT.joyCenter[axis];
-    scaled = (raw * 128) / range;
-    if (scaled < -128)
-	scaled = -128;
-    if (scaled > 127)
-	scaled = 127;
-    return scaled;
-}
-#endif
-
-#if     defined(__SMX32__)
-#include "smx/event.c"
-#elif   defined(__RTTARGET__)
-#include "rttarget/event.c"
-#elif   defined(__REALDOS__)
-#include "dos/event.c"
-#elif   defined(__WINDOWS32__)
-#include "win32/event.c"
-#elif   defined(__OS2__)
-#if     defined(__OS2_PM__)
-#include "os2pm/event.c"
-#else
-#include "os2/event.c"
-#endif
-#elif   defined(__LINUX__)
-#if     defined(__USE_X11__)
-#include "x11/event.c"
-#else
-#include "linux/event.c"
-#endif
-#elif   defined(__QNX__)
-#if     defined(__USE_PHOTON__)
-#include "photon/event.c"
-#elif   defined(__USE_X11__)
-#include "x11/event.c"
-#else
-#include "qnx/event.c"
-#endif
-#elif   defined(__BEOS__)
-#include "beos/event.c"
-#else
-#error  Event library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/* If USE_OS_JOYSTICK is defined, the OS specific libraries will implement
- * the joystick code rather than using the generic OS portable version.
- */
-
-#ifndef USE_OS_JOYSTICK
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
-    int mask,i;
-
-    memset(EVT.joyMin,0,sizeof(EVT.joyMin));
-    memset(EVT.joyCenter,0,sizeof(EVT.joyCenter));
-    memset(EVT.joyMax,0,sizeof(EVT.joyMax));
-    memset(EVT.joyPrev,0,sizeof(EVT.joyPrev));
-    EVT.joyButState = 0;
-#ifdef __LINUX__
-    PM_init();
-#endif
-    mask = _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-    if (mask) {
-	for (i = 0; i < JOY_NUM_AXES; i++)
-	    EVT.joyMax[i] = EVT.joyCenter[i]*2;
-	}
-    return mask;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note:   Most analogue joysticks will provide readings that change even
-	though the joystick has not moved. Hence if you call this routine
-	you will likely get an EVT_JOYMOVE event every time through your
-	event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
-    event_t evt;
-    int     i,axis[JOY_NUM_AXES],newButState,mask,moved,ps;
-
-    if (EVT.joyMask) {
-	/* Read joystick axes and post movement events if they have
-	 * changed since the last time we polled. Until the events are
-	 * actually flushed, we keep modifying the same joystick movement
-	 * event, so you won't get multiple movement event
-	 */
-	mask = _EVT_readJoyAxis(EVT.joyMask,axis);
-	newButState = _EVT_readJoyButtons();
-	moved = false;
-	for (i = 0; i < JOY_NUM_AXES; i++) {
-	    if (mask & (EVT_JOY_AXIS_X1 << i))
-		axis[i] = scaleJoyAxis(axis[i],i);
-	    else
-		axis[i] = EVT.joyPrev[i];
-	    if (axis[i] != EVT.joyPrev[i])
-		moved = true;
-	    }
-	if (moved) {
-	    memcpy(EVT.joyPrev,axis,sizeof(EVT.joyPrev));
-	    ps = _EVT_disableInt();
-	    if (EVT.oldJoyMove != -1) {
-		/* Modify the existing joystick movement event */
-		EVT.evtq[EVT.oldJoyMove].message = newButState;
-		EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
-		EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
-		EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
-		EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
-		}
-	    else if (EVT.count < EVENTQSIZE) {
-		/* Add a new joystick movement event */
-		EVT.oldJoyMove = EVT.freeHead;
-		memset(&evt,0,sizeof(evt));
-		evt.what = EVT_JOYMOVE;
-		evt.message = EVT.joyButState;
-		evt.where_x = EVT.joyPrev[0];
-		evt.where_y = EVT.joyPrev[1];
-		evt.relative_x = EVT.joyPrev[2];
-		evt.relative_y = EVT.joyPrev[3];
-		addEvent(&evt);
-		}
-	    _EVT_restoreInt(ps);
-	    }
-
-	/* Read the joystick buttons, and post events to reflect the change
-	 * in state for the joystick buttons.
-	 */
-	if (newButState != EVT.joyButState) {
-	    if (EVT.count < EVENTQSIZE) {
-		/* Add a new joystick click event */
-		ps = _EVT_disableInt();
-		memset(&evt,0,sizeof(evt));
-		evt.what = EVT_JOYCLICK;
-		evt.message = newButState;
-		EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
-		EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
-		EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
-		EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
-		addEvent(&evt);
-		_EVT_restoreInt(ps);
-		}
-	    EVT.joyButState = newButState;
-	    }
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMin);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMax);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-}
-#endif
-
-/****************************************************************************
-DESCRIPTION:
-Posts a user defined event to the event queue
-
-HEADER:
-event.h
-
-RETURNS:
-True if event was posted, false if event queue is full.
-
-PARAMETERS:
-what        - Type code for message to post
-message     - Event specific message to post
-modifiers   - Event specific modifier flags to post
-
-REMARKS:
-This routine is used to post user defined events to the event queue.
-
-SEE ALSO:
-EVT_flush, EVT_getNext, EVT_peekNext, EVT_halt
-****************************************************************************/
-ibool EVTAPI EVT_post(
-    ulong which,
-    ulong what,
-    ulong message,
-    ulong modifiers)
-{
-    event_t evt;
-    uint    ps;
-
-    if (EVT.count < EVENTQSIZE) {
-	/* Save information in event record */
-	ps = _EVT_disableInt();
-	evt.which = which;
-	evt.when = _EVT_getTicks();
-	evt.what = what;
-	evt.message = message;
-	evt.modifiers = modifiers;
-	addEvent(&evt);             /* Add to EVT.tail of event queue   */
-	_EVT_restoreInt(ps);
-	return true;
-	}
-    else
-	return false;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Flushes all events of a specified type from the event queue.
-
-PARAMETERS:
-mask    - Mask specifying the types of events that should be removed
-
-HEADER:
-event.h
-
-REMARKS:
-Flushes (removes) all pending events of the specified type from the event
-queue. You may combine the masks for different event types with a simple
-logical OR.
-
-SEE ALSO:
-EVT_getNext, EVT_halt, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_flush(
-    ulong mask)
-{
-    event_t evt;
-
-    do {                            /* Flush all events */
-	EVT_getNext(&evt,mask);
-	} while (evt.what != EVT_NULLEVT);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Halts until and event of the specified type is recieved.
-
-HEADER:
-event.h
-
-PARAMETERS:
-evt     - Pointer to
-mask    - Mask specifying the types of events that should be removed
-
-REMARKS:
-This functions halts exceution until an event of the specified type is
-recieved into the event queue. It does not flush the event queue of events
-before performing the busy loop. However this function does throw away
-any events other than the ones you have requested via the event mask, to
-avoid the event queue filling up with unwanted events (like EVT_KEYUP or
-EVT_MOUSEMOVE events).
-
-SEE ALSO:
-EVT_getNext, EVT_flush, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_halt(
-    event_t *evt,
-    ulong mask)
-{
-    do {                            /* Wait for an event    */
-	if (mask & (EVT_JOYEVT))
-	    EVT_pollJoystick();
-	EVT_getNext(evt,EVT_EVERYEVT);
-	} while (!(evt->what & mask));
-}
-
-/****************************************************************************
-DESCRIPTION:
-Peeks at the next pending event in the event queue.
-
-HEADER:
-event.h
-
-RETURNS:
-True if an event is pending, false if not.
-
-PARAMETERS:
-evt     - Pointer to structure to return the event info in
-mask    - Mask specifying the types of events that should be removed
-
-REMARKS:
-Peeks at the next pending event of the specified type in the event queue. The
-mask parameter is used to specify the type of events to be peeked at, and
-can be any logical combination of any of the flags defined by the
-EVT_eventType enumeration.
-
-In contrast to EVT_getNext, the event is not removed from the event queue.
-You may combine the masks for different event types with a simple logical OR.
-
-SEE ALSO:
-EVT_flush, EVT_getNext, EVT_halt
-****************************************************************************/
-ibool EVTAPI EVT_peekNext(
-    event_t *evt,
-    ulong mask)
-{
-    int     evtID;
-    uint    ps;
-
-    if (EVT.heartBeat)
-	EVT.heartBeat(EVT.heartBeatParams);
-    _EVT_pumpMessages();                /* Pump all messages into queue */
-    EVT.mouseMove(EVT.mx,EVT.my);       /* Move the mouse cursor        */
-    evt->what = EVT_NULLEVT;            /* Default to null event        */
-    if (EVT.count) {
-	/* It is possible that an event be posted while we are trying
-	 * to access the event queue. This would create problems since
-	 * we may end up with invalid data for our event queue pointers. To
-	 * alleviate this, all interrupts are suspended while we manipulate
-	 * our pointers.
-	 */
-	ps = _EVT_disableInt();             /* disable interrupts       */
-	for (evtID = EVT.head; evtID != -1; evtID = EVT.evtq[evtID].next) {
-	    if (EVT.evtq[evtID].what & mask)
-		break;                      /* Found an event           */
-	    }
-	if (evtID == -1) {
-	    _EVT_restoreInt(ps);
-	    return false;                   /* Event was not found      */
-	    }
-	*evt = EVT.evtq[evtID];                 /* Return the event         */
-	_EVT_restoreInt(ps);
-	if (evt->what & EVT_KEYEVT)
-	    _EVT_maskKeyCode(evt);
-	}
-    return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Retrieves the next pending event from the event queue.
-
-PARAMETERS:
-evt     - Pointer to structure to return the event info in
-mask    - Mask specifying the types of events that should be removed
-
-HEADER:
-event.h
-
-RETURNS:
-True if an event was pending, false if not.
-
-REMARKS:
-Retrieves the next pending event from the event queue, and stores it in a
-event_t structure. The mask parameter is used to specify the type of events
-to be removed, and can be any logical combination of any of the flags defined
-by the EVT_eventType enumeration.
-
-The what field of the event contains the event code of the event that was
-extracted. All application specific events should begin with the EVT_USEREVT
-code and build from there. Since the event code is stored in an integer,
-there is a maximum of 32 different event codes that can be distinguished.
-You can store extra information about the event in the message field to
-distinguish between events of the same class (for instance the button used in
-a EVT_MOUSEDOWN event).
-
-If an event of the specified type was not in the event queue, the what field
-of the event will be set to NULLEVT, and the return value will return false.
-
-Note:   You should /always/ use the EVT_EVERYEVT mask for extracting events
-	from your main event loop handler. Using a mask for only a specific
-	type of event for long periods of time will cause the event queue to
-	fill up with events of the type you are ignoring, eventually causing
-	the application to hang when the event queue becomes full.
-
-SEE ALSO:
-EVT_flush, EVT_halt, EVT_peekNext
-****************************************************************************/
-ibool EVTAPI EVT_getNext(
-    event_t *evt,
-    ulong mask)
-{
-    int     evtID,next,prev;
-    uint    ps;
-
-    if (EVT.heartBeat)
-	EVT.heartBeat(EVT.heartBeatParams);
-    _EVT_pumpMessages();                /* Pump all messages into queue */
-    EVT.mouseMove(EVT.mx,EVT.my);       /* Move the mouse cursor        */
-    evt->what = EVT_NULLEVT;            /* Default to null event        */
-    if (EVT.count) {
-	/* It is possible that an event be posted while we are trying
-	 * to access the event queue. This would create problems since
-	 * we may end up with invalid data for our event queue pointers. To
-	 * alleviate this, all interrupts are suspended while we manipulate
-	 * our pointers.
-	 */
-	ps = _EVT_disableInt();             /* disable interrupts       */
-	for (evtID = EVT.head; evtID != -1; evtID = EVT.evtq[evtID].next) {
-	    if (EVT.evtq[evtID].what & mask)
-		break;                      /* Found an event           */
-	    }
-	if (evtID == -1) {
-	    _EVT_restoreInt(ps);
-	    return false;                   /* Event was not found      */
-	    }
-	next = EVT.evtq[evtID].next;
-	prev = EVT.evtq[evtID].prev;
-	if (prev != -1)
-	    EVT.evtq[prev].next = next;
-	else
-	    EVT.head = next;
-	if (next != -1)
-	    EVT.evtq[next].prev = prev;
-	else
-	    EVT.tail = prev;
-	*evt = EVT.evtq[evtID];                 /* Return the event         */
-	EVT.evtq[evtID].next = EVT.freeHead;        /* and return to free list  */
-	EVT.freeHead = evtID;
-	EVT.count--;
-	if (evt->what == EVT_MOUSEMOVE)
-	    EVT.oldMove = -1;
-	if (evt->what == EVT_KEYREPEAT)
-	    EVT.oldKey = -1;
-	if (evt->what == EVT_JOYMOVE)
-	    EVT.oldJoyMove = -1;
-	_EVT_restoreInt(ps);                /* enable interrupts        */
-	if (evt->what & EVT_KEYEVT)
-	    _EVT_maskKeyCode(evt);
-	}
-
-    /* If there is no event pending, check if we should generate an auto
-     * mouse down event if the mouse is still currently down.
-     */
-    if (evt->what == EVT_NULLEVT && EVT.autoRepeat && (mask & EVT_MOUSEAUTO) && (EVT.downMouse.what & EVT_MOUSEDOWN)) {
-	ulong ticks = _EVT_getTicks();
-	if ((ticks - EVT.autoTicks) >= (EVT.autoRepeat + (EVT.firstAuto ? EVT.autoDelay : 0))) {
-	    evt->what = EVT_MOUSEAUTO;
-	    evt->message = EVT.downMouse.message;
-	    evt->modifiers = EVT.downMouse.modifiers;
-	    evt->where_x = EVT.autoMouse_x;
-	    evt->where_y = EVT.autoMouse_y;
-	    evt->relative_x = 0;
-	    evt->relative_y = 0;
-	    EVT.autoTicks = evt->when = ticks;
-	    EVT.firstAuto = false;
-	    }
-	}
-    return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Installs a user supplied event filter callback for event handling.
-
-HEADER:
-event.h
-
-PARAMETERS:
-userEventFilter - Address of user supplied event filter callback
-
-REMARKS:
-This function allows the application programmer to install an event filter
-callback for event handling. Once you install your callback, the MGL
-event handling routines will call your callback with a pointer to the
-new event that will be placed into the event queue. Your callback can the
-modify the contents of the event before it is placed into the queue (for
-instance adding custom information or perhaps high precision timing
-information).
-
-If your callback returns FALSE, the event will be ignore and will not be
-posted to the event queue. You should always return true from your event
-callback unless you plan to use the events immediately that they are
-recieved.
-
-Note:   Your event callback may be called in response to a hardware
-	interrupt and will be executing in the context of the hardware
-	interrupt handler under MSDOS (ie: keyboard interrupt or mouse
-	interrupt). For this reason the code pages for the callback that
-	you register must be locked in memory with the PM_lockCodePages
-	function. You must also lock down any data pages that your function
-	needs to reference as well.
-
-Note:   You can also use this filter callback to process events at the
-	time they are activated by the user (ie: when the user hits the
-	key or moves the mouse), but make sure your code runs as fast as
-	possible as it will be executing inside the context of an interrupt
-	handler on some systems.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_setUserEventFilter(
-    _EVT_userEventFilter filter)
-{
-    EVT.userEventCallback = filter;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Installs a user supplied event heartbeat callback function.
-
-HEADER:
-event.h
-
-PARAMETERS:
-callback    - Address of user supplied event heartbeat callback
-params      - Parameters to pass to the event heartbeat function
-
-REMARKS:
-This function allows the application programmer to install an event heatbeat
-function that gets called every time that EVT_getNext or EVT_peekNext
-is called. This is primarily useful for simulating text mode cursors inside
-event handling code when running in graphics modes as opposed to hardware
-text modes.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_getHeartBeatCallback
-****************************************************************************/
-void EVTAPI EVT_setHeartBeatCallback(
-    _EVT_heartBeatCallback callback,
-    void *params)
-{
-    EVT.heartBeat = callback;
-    EVT.heartBeatParams = params;
-}
-
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current user supplied event heartbeat callback function.
-
-HEADER:
-event.h
-
-PARAMETERS:
-callback    - Place to store the address of user supplied event heartbeat callback
-params      - Place to store the parameters to pass to the event heartbeat function
-
-REMARKS:
-This function retrieves the current event heatbeat function that gets called
-every time that EVT_getNext or EVT_peekNext is called.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_setHeartBeatCallback
-****************************************************************************/
-void EVTAPI EVT_getHeartBeatCallback(
-    _EVT_heartBeatCallback *callback,
-    void **params)
-{
-    *callback = EVT.heartBeat;
-    *params = EVT.heartBeatParams;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Determines if a specified key is currently down.
-
-PARAMETERS:
-scanCode    - Scan code to test
-
-RETURNS:
-True of the specified key is currently held down.
-
-HEADER:
-event.h
-
-REMARKS:
-This function determines if a specified key is currently down at the
-time that the call is made. You simply need to pass in the scan code of
-the key that you wish to test, and the MGL will tell you if it is currently
-down or not. The MGL does this by keeping track of the up and down state
-of all the keys.
-****************************************************************************/
-ibool EVTAPI EVT_isKeyDown(
-    uchar scanCode)
-{
-    return _EVT_isKeyDown(scanCode);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Set the mouse position for the event module
-
-PARAMETERS:
-x   - X coordinate to move the mouse cursor position to
-y   - Y coordinate to move the mouse cursor position to
-
-HEADER:
-event.h
-
-REMARKS:
-This function moves the mouse cursor position for the event module to the
-specified location.
-
-SEE ALSO:
-EVT_getMousePos
-****************************************************************************/
-void EVTAPI EVT_setMousePos(
-    int x,
-    int y)
-{
-    EVT.mx = x;
-    EVT.my = y;
-    _EVT_setMousePos(&EVT.mx,&EVT.my);
-    EVT.mouseMove(EVT.mx,EVT.my);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current mouse cursor location.
-
-HEADER:
-event.h
-
-PARAMETERS:
-x   - Place to store value for mouse x coordinate (screen coordinates)
-y   - Place to store value for mouse y coordinate (screen coordinates)
-
-REMARKS:
-Obtains the current mouse cursor position in screen coordinates. Normally the
-mouse cursor location is tracked using the mouse movement events that are
-posted to the event queue when the mouse moves, however this routine
-provides an alternative method of polling the mouse cursor location.
-
-SEE ALSO:
-EVT_setMousePos
-****************************************************************************/
-void EVTAPI EVT_getMousePos(
-    int *x,
-    int *y)
-{
-    *x = EVT.mx;
-    *y = EVT.my;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the currently active code page for translation of keyboard characters.
-
-HEADER:
-event.h
-
-RETURNS:
-Pointer to the currently active code page translation table.
-
-REMARKS:
-This function is returns a pointer to the currently active code page
-translation table. See EVT_setCodePage for more information.
-
-SEE ALSO:
-EVT_setCodePage
-****************************************************************************/
-codepage_t * EVTAPI EVT_getCodePage(void)
-{
-    return EVT.codePage;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Sets the currently active code page for translation of keyboard characters.
-
-HEADER:
-event.h
-
-PARAMETERS:
-page    - New code page to make active
-
-REMARKS:
-This function is used to set a new code page translation table that is used
-to translate virtual scan code values to ASCII characters for different
-keyboard configurations. The default is usually US English, although if
-possible the PM library will auto-detect the correct code page translation
-for the target OS if OS services are available to determine what type of
-keyboard is currently attached.
-
-SEE ALSO:
-EVT_getCodePage
-****************************************************************************/
-void EVTAPI EVT_setCodePage(
-    codepage_t *page)
-{
-    EVT.codePage = page;
-}
-
-/* The following contains fake C prototypes and documentation for the
- * macro functions in the event.h header file. These exist soley so
- * that DocJet will correctly pull in the documentation for these functions.
- */
-#ifdef  INCLUDE_DOC_FUNCTIONS
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the ASCII code from a message.
-
-PARAMETERS:
-message - Message to extract ASCII code from
-
-RETURNS:
-ASCII code extracted from the message.
-
-HEADER:
-event.h
-
-REMARKS:
-Macro to extract the ASCII code from the message field of the event_t
-structure. You pass the message field to the macro as the parameter and
-the ASCII code is the result, for example:
-
-    event_t EVT.myEvent;
-    uchar   code;
-    code = EVT_asciiCode(EVT.myEvent.message);
-
-SEE ALSO:
-EVT_scanCode, EVT_repeatCount
-****************************************************************************/
-uchar EVT_asciiCode(
-    ulong message);
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the keyboard scan code from a message.
-
-HEADER:
-event.h
-
-PARAMETERS:
-message - Message to extract scan code from
-
-RETURNS:
-Keyboard scan code extracted from the message.
-
-REMARKS:
-Macro to extract the keyboard scan code from the message field of the event
-structure. You pass the message field to the macro as the parameter and
-the scan code is the result, for example:
-
-    event_t EVT.myEvent;
-    uchar   code;
-    code = EVT_scanCode(EVT.myEvent.message);
-
-NOTE:   Scan codes in the event library are not really hardware scan codes,
-	but rather virtual scan codes as generated by a low level keyboard
-	interface driver. All virtual scan code values are defined by the
-	EVT_scanCodesType enumeration, and will be identical across all
-	supports OS'es and platforms.
-
-SEE ALSO:
-EVT_asciiCode, EVT_repeatCount
-****************************************************************************/
-uchar EVT_scanCode(
-    ulong message);
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the repeat count from a message.
-
-HEADER:
-event.h
-
-PARAMETERS:
-message - Message to extract repeat count from
-
-RETURNS:
-Repeat count extracted from the message.
-
-REMARKS:
-Macro to extract the repeat count from the message field of the event
-structure. The repeat count is the number of times that the key repeated
-before there was another keyboard event to be place in the queue, and
-allows the event handling code to avoid keyboard buffer overflow
-conditions when a single key is held down by the user. If you are processing
-a key repeat code, you will probably want to check this field to see how
-many key repeats you should process for this message.
-
-SEE ALSO:
-EVT_asciiCode, EVT_repeatCount
-****************************************************************************/
-short EVT_repeatCount(
-    ulong message);
-
-#endif  /* DOC FUNCTIONS */
-
-#if defined(__REALDOS__) || defined(__SMX32__)
-/* {secret} */
-void EVTAPI _EVT_cCodeEnd(void) {}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c
deleted file mode 100644
index e88d210954..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  Linux specific code for the CPU detection module.
-*
-****************************************************************************/
-
-#include <ztimer.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for Linux!
-****************************************************************************/
-#define SetMaxThreadPriority()  0
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for Linux!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    freq->low = 1000000;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                           \
-{                                               \
-    struct timeval tv;                          \
-    gettimeofday(&tv,NULL);                     \
-    (t)->low = tv.tv_sec*1000000 + tv.tv_usec;  \
-    (t)->high = 0;                              \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/event.c b/board/MAI/bios_emulator/scitech/src/pm/linux/event.c
deleted file mode 100644
index ce38732097..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/event.c
+++ /dev/null
@@ -1,1360 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  Linux fullscreen console implementation for the SciTech
-*               cross platform event library.
-*               Portions ripped straigth from the gpm source code for mouse
-*               handling.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-extern int              _PM_console_fd;
-static ushort           keyUpMsg[256] = {0};
-static int              _EVT_mouse_fd = 0;
-static int              range_x, range_y;
-static int              opt_baud = 1200, opt_sample = 100;
-#ifdef USE_OS_JOYSTICK
-static short            *axis0 = NULL, *axis1 = NULL;
-static uchar            *buts0 = NULL, *buts1 = NULL;
-static int              joystick0_fd = 0, joystick1_fd = 0;
-static int              js_version = 0;
-#endif
-
-/* This defines the supported mouse drivers */
-
-typedef enum {
-    EVT_noMouse = -1,
-    EVT_microsoft = 0,
-    EVT_ps2,
-    EVT_mousesystems,
-    EVT_gpm,
-    EVT_MMseries,
-    EVT_logitech,
-    EVT_busmouse,
-    EVT_mouseman,
-    EVT_intellimouse,
-    EVT_intellimouse_ps2,
-    } mouse_drivers_t;
-
-static mouse_drivers_t mouse_driver = EVT_noMouse;
-static char mouse_dev[20] = "/dev/mouse";
-
-typedef struct {
-    char    *name;
-    int     flags;
-    void    (*init)(void);
-    uchar   proto[4];
-    int     packet_len;
-    int     read;
-    } mouse_info;
-
-#define STD_FLG (CREAD | CLOCAL | HUPCL)
-
-static void _EVT_mouse_init(void);
-static void _EVT_logitech_init(void);
-static void _EVT_pnpmouse_init(void);
-
-mouse_info mouse_infos[] = {
-    {"Microsoft",       CS7 | B1200 | STD_FLG,              _EVT_mouse_init,    {0x40, 0x40, 0x40, 0x00}, 3, 1},
-    {"PS2",             STD_FLG,                            NULL,               {0xc0, 0x00, 0x00, 0x00}, 3, 1},
-    {"MouseSystems",    CS8 | CSTOPB | STD_FLG,             _EVT_mouse_init,    {0xf8, 0x80, 0x00, 0x00}, 5, 5},
-    {"GPM",             CS8 | CSTOPB | STD_FLG,             NULL,               {0xf8, 0x80, 0x00, 0x00}, 5, 5},
-    {"MMSeries",        CS8 | PARENB | PARODD | STD_FLG,    _EVT_mouse_init,    {0xe0, 0x80, 0x80, 0x00}, 3, 1},
-    {"Logitech",        CS8 | CSTOPB | STD_FLG,             _EVT_logitech_init, {0xe0, 0x80, 0x80, 0x00}, 3, 3},
-    {"BusMouse",        STD_FLG,                            NULL,               {0xf8, 0x80, 0x00, 0x00}, 3, 3},
-    {"MouseMan",        CS7 | STD_FLG,                      _EVT_mouse_init,    {0x40, 0x40, 0x40, 0x00}, 3, 1},
-    {"IntelliMouse",    CS7 | STD_FLG,                      _EVT_pnpmouse_init, {0xc0, 0x40, 0xc0, 0x00}, 4, 1},
-    {"IMPS2",           CS7 | STD_FLG,                      NULL,               {0xc0, 0x40, 0xc0, 0x00}, 4, 1}, /* ? */
-    };
-
-#define NB_MICE (sizeof(mouse_infos)/sizeof(mouse_info))
-
-/* The name of the environment variables that are used to change the defaults above */
-
-#define ENV_MOUSEDRV "MGL_MOUSEDRV"
-#define ENV_MOUSEDEV "MGL_MOUSEDEV"
-#define ENV_MOUSESPD "MGL_MOUSESPD"
-#define ENV_JOYDEV0  "MGL_JOYDEV1"
-#define ENV_JOYDEV1  "MGL_JOYDEV2"
-
-/* Scancode mappings on Linux for special keys */
-
-typedef struct {
-    int scan;
-    int map;
-    } keymap;
-
-/* TODO: Fix this and set it up so we can do a binary search! */
-
-keymap keymaps[] = {
-    {96, KB_padEnter},
-    {74, KB_padMinus},
-    {78, KB_padPlus},
-    {55, KB_padTimes},
-    {98, KB_padDivide},
-    {71, KB_padHome},
-    {72, KB_padUp},
-    {73, KB_padPageUp},
-    {75, KB_padLeft},
-    {76, KB_padCenter},
-    {77, KB_padRight},
-    {79, KB_padEnd},
-    {80, KB_padDown},
-    {81, KB_padPageDown},
-    {82, KB_padInsert},
-    {83, KB_padDelete},
-    {105,KB_left},
-    {108,KB_down},
-    {106,KB_right},
-    {103,KB_up},
-    {110,KB_insert},
-    {102,KB_home},
-    {104,KB_pageUp},
-    {111,KB_delete},
-    {107,KB_end},
-    {109,KB_pageDown},
-    {125,KB_leftWindows},
-    {126,KB_rightWindows},
-    {127,KB_menu},
-    {100,KB_rightAlt},
-    {97,KB_rightCtrl},
-    };
-
-/* And the keypad with num lock turned on (changes the ASCII code only) */
-
-keymap keypad[] = {
-    {71, ASCII_7},
-    {72, ASCII_8},
-    {73, ASCII_9},
-    {75, ASCII_4},
-    {76, ASCII_5},
-    {77, ASCII_6},
-    {79, ASCII_1},
-    {80, ASCII_2},
-    {81, ASCII_3},
-    {82, ASCII_0},
-    {83, ASCII_period},
-    };
-
-#define NB_KEYMAPS (sizeof(keymaps)/sizeof(keymaps[0]))
-#define NB_KEYPAD (sizeof(keypad)/sizeof(keypad[0]))
-
-typedef struct {
-    int     sample;
-    char    code[2];
-    } sample_rate;
-
-sample_rate sampletab[]={
-    {  0,"O"},
-    { 15,"J"},
-    { 27,"K"},
-    { 42,"L"},
-    { 60,"R"},
-    { 85,"M"},
-    {125,"Q"},
-    {1E9,"N"},
-    };
-
-/* Number of keycodes to read at a time from the console */
-
-#define KBDREADBUFFERSIZE 32
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Linux */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flaps)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    static uint     starttime = 0;
-    struct timeval  t;
-
-    gettimeofday(&t, NULL);
-    if (starttime == 0)
-      starttime = t.tv_sec * 1000 + (t.tv_usec/1000);
-    return ((t.tv_sec * 1000 + (t.tv_usec/1000)) - starttime);
-}
-
-/****************************************************************************
-REMARKS:
-Small Unix function that checks for availability on a file using select()
-****************************************************************************/
-static ibool dataReady(
-    int fd)
-{
-    static struct timeval   t = { 0L, 0L };
-    fd_set                  fds;
-
-    FD_ZERO(&fds);
-    FD_SET(fd, &fds);
-    return select(fd+1, &fds, NULL, NULL, &t) > 0;
-}
-
-/****************************************************************************
-REMARKS:
-Reads mouse data according to the selected mouse driver.
-****************************************************************************/
-static ibool readMouseData(
-    int *buttons,
-    int *dx,
-    int *dy)
-{
-    static uchar    data[32],prev = 0;
-    int             cnt = 0,ret;
-    mouse_info      *drv;
-
-    /* Read the first byte to check for the protocol */
-    drv = &mouse_infos[mouse_driver];
-    if (read(_EVT_mouse_fd, data, drv->read) != drv->read) {
-	perror("read");
-	return false;
-	}
-    if ((data[0] & drv->proto[0]) != drv->proto[1])
-	return false;
-
-    /* Load a whole protocol packet */
-    cnt += drv->read;
-    while (cnt < drv->packet_len) {
-	ret = read(_EVT_mouse_fd, data+cnt, drv->read);
-	if (ret == drv->read)
-	    cnt += ret;
-	else {
-	    perror("read");
-	    return false;
-	    }
-	}
-    if ((data[1] & drv->proto[2]) != drv->proto[3])
-	return false;
-
-    /* Now decode the protocol packet */
-    switch (mouse_driver) {
-	case EVT_microsoft:
-	    if (data[0] == 0x40 && !(prev|data[1]|data[2]))
-		*buttons = 2;   /* Third button on MS compatible mouse */
-	    else
-		*buttons= ((data[0] & 0x20) >> 3) | ((data[0] & 0x10) >> 4);
-	    prev = *buttons;
-	    *dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
-	    *dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
-	    break;
-	case EVT_ps2:
-	    *buttons = !!(data[0]&1) * 4 + !!(data[0]&2) * 1 + !!(data[0]&4) * 2;
-	    if (data[1] != 0)
-		*dx = (data[0] & 0x10) ? data[1]-256 : data[1];
-	    else
-		*dx = 0;
-	    if (data[2] != 0)
-		*dy = -((data[0] & 0x20) ? data[2]-256 : data[2]);
-	    else
-		*dy = 0;
-	    break;
-	case EVT_mousesystems: case EVT_gpm:
-	    *buttons = (~data[0]) & 0x07;
-	    *dx = (char)(data[1]) + (char)(data[3]);
-	    *dy = -((char)(data[2]) + (char)(data[4]));
-	    break;
-	case EVT_logitech:
-	    *buttons= data[0] & 0x07;
-	    *dx = (data[0] & 0x10) ?   data[1] : - data[1];
-	    *dy = (data[0] & 0x08) ? - data[2] :   data[2];
-	    break;
-	case EVT_busmouse:
-	    *buttons= (~data[0]) & 0x07;
-	    *dx = (char)data[1];
-	    *dy = -(char)data[2];
-	    break;
-	case EVT_MMseries:
-	    *buttons = data[0] & 0x07;
-	    *dx = (data[0] & 0x10) ?   data[1] : - data[1];
-	    *dy = (data[0] & 0x08) ? - data[2] :   data[2];
-	    break;
-	case EVT_intellimouse:
-	    *buttons = ((data[0] & 0x20) >> 3)  /* left */
-		     | ((data[3] & 0x10) >> 3)  /* middle */
-		     | ((data[0] & 0x10) >> 4); /* right */
-	    *dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
-	    *dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
-	    break;
-	case EVT_intellimouse_ps2:
-	    *buttons = (data[0] & 0x04) >> 1 /* Middle */
-		| (data[0] & 0x02) >> 1 /* Right */
-		| (data[0] & 0x01) << 2; /* Left */
-	    *dx = (data[0] & 0x10) ?    data[1]-256  :  data[1];
-	    *dy = (data[0] & 0x20) ?  -(data[2]-256) : -data[2];
-	    break;
-	case EVT_mouseman: {
-	    static int      getextra;
-	    static uchar    prev=0;
-	    uchar           b;
-
-	    /* The damned MouseMan has 3/4 bytes packets. The extra byte
-	     * is only there if the middle button is active.
-	     * I get the extra byte as a packet with magic numbers in it.
-	     * and then switch to 4-byte mode.
-	     */
-	    if (data[1] == 0xAA && data[2] == 0x55) {
-		/* Got unexpected fourth byte */
-		if ((b = (*data>>4)) > 0x3)
-		    return false;  /* just a sanity check */
-		*dx = *dy = 0;
-		drv->packet_len=4;
-		getextra=0;
-		}
-	    else {
-		/* Got 3/4, as expected */
-		/* Motion is independent of packetlen... */
-		*dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
-		*dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
-		prev = ((data[0] & 0x20) >> 3) | ((data[0] & 0x10) >> 4);
-		if (drv->packet_len==4)
-		    b = data[3]>>4;
-		}
-	    if (drv->packet_len == 4) {
-		if (b == 0) {
-		    drv->packet_len = 3;
-		    getextra = 1;
-		    }
-		else {
-		    if (b & 0x2)
-			prev |= 2;
-		    }
-		}
-	    *buttons = prev;
-
-	    /* This "chord-middle" behaviour was reported by David A. van Leeuwen */
-	    if (((prev ^ *buttons) & 5) == 5)
-		*buttons = *buttons ? 2 : 0;
-	    prev = *buttons;
-	    break;
-	    }
-	case EVT_noMouse:
-	    return false;
-	    break;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Map a keypress via the key mapping table
-****************************************************************************/
-static int getKeyMapping(
-    keymap *tab,
-    int nb,
-    int key)
-{
-    int i;
-
-    for(i = 0; i < nb; i++) {
-	if (tab[i].scan == key)
-	    return tab[i].map;
-	}
-    return key;
-}
-
-#ifdef USE_OS_JOYSTICK
-
-static char js0_axes = 0, js0_buttons = 0;
-static char js1_axes = 0, js1_buttons = 0;
-static char joystick0_dev[20] = "/dev/js0";
-static char joystick1_dev[20] = "/dev/js1";
-
-/****************************************************************************
-REMARKS:
-Create a joystick event from the joystick data
-****************************************************************************/
-static void makeJoyEvent(
-    event_t *evt)
-{
-    evt->message = 0;
-    if (buts0 && axis0) {
-	if (buts0[0]) evt->message |= EVT_JOY1_BUTTONA;
-	if (buts0[1]) evt->message |= EVT_JOY1_BUTTONB;
-	evt->where_x = axis0[0];
-	evt->where_y = axis0[1];
-	}
-    else
-	evt->where_x = evt->where_y = 0;
-    if (buts1 && axis1) {
-	if (buts1[0]) evt->message |= EVT_JOY2_BUTTONA;
-	if (buts1[1]) evt->message |= EVT_JOY2_BUTTONB;
-	evt->where_x = axis1[0];
-	evt->where_y = axis1[1];
-	}
-    else
-	evt->where_x = evt->where_y = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the joystick axis data
-****************************************************************************/
-int EVTAPI _EVT_readJoyAxis(
-    int jmask,
-    int *axis)
-{
-    int mask = 0;
-
-    if ((js_version & ~0xffff) == 0) {
-	/* Old 0.x driver */
-	struct JS_DATA_TYPE js;
-	if (joystick0_fd && read(joystick0_fd, &js, JS_RETURN) == JS_RETURN) {
-	    if (jmask & EVT_JOY_AXIS_X1)
-		axis[0] = js.x;
-	    if (jmask & EVT_JOY_AXIS_Y1)
-		axis[1] = js.y;
-	    mask |= EVT_JOY_AXIS_X1|EVT_JOY_AXIS_Y1;
-	    }
-	if (joystick1_fd && read(joystick1_fd, &js, JS_RETURN) == JS_RETURN) {
-	    if (jmask & EVT_JOY_AXIS_X2)
-		axis[2] = js.x;
-	    if (jmask & EVT_JOY_AXIS_Y2)
-		axis[3] = js.y;
-	    mask |= EVT_JOY_AXIS_X2|EVT_JOY_AXIS_Y2;
-	    }
-	}
-    else {
-	if (axis0) {
-	    if (jmask & EVT_JOY_AXIS_X1)
-		axis[0] = axis0[0];
-	    if (jmask & EVT_JOY_AXIS_Y1)
-		axis[1] = axis0[1];
-	    mask |= EVT_JOY_AXIS_X1 | EVT_JOY_AXIS_Y1;
-	    }
-	if (axis1) {
-	    if (jmask & EVT_JOY_AXIS_X2)
-		axis[2] = axis1[0];
-	    if (jmask & EVT_JOY_AXIS_Y2)
-		axis[3] = axis1[1];
-	    mask |= EVT_JOY_AXIS_X2 | EVT_JOY_AXIS_Y2;
-	    }
-	}
-    return mask;
-}
-
-/****************************************************************************
-REMARKS:
-Read the joystick button data
-****************************************************************************/
-int EVTAPI _EVT_readJoyButtons(void)
-{
-    int buts = 0;
-
-    if ((js_version & ~0xffff) == 0) {
-	/* Old 0.x driver */
-	struct JS_DATA_TYPE js;
-	if (joystick0_fd && read(joystick0_fd, &js, JS_RETURN) == JS_RETURN)
-	    buts = js.buttons;
-	if (joystick1_fd && read(joystick1_fd, &js, JS_RETURN) == JS_RETURN)
-	    buts |= js.buttons << 2;
-	}
-    else {
-	if (buts0)
-	    buts |= EVT_JOY1_BUTTONA*buts0[0] + EVT_JOY1_BUTTONB*buts0[1];
-	if (buts1)
-	    buts |= EVT_JOY2_BUTTONA*buts1[0] + EVT_JOY2_BUTTONB*buts1[1];
-	}
-    return buts;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
-    static int      mask = 0;
-    int             i;
-    char            *tmp, name0[128], name1[128];
-    static ibool    inited = false;
-
-    if (inited)
-	return mask;
-    memset(EVT.joyMin,0,sizeof(EVT.joyMin));
-    memset(EVT.joyCenter,0,sizeof(EVT.joyCenter));
-    memset(EVT.joyMax,0,sizeof(EVT.joyMax));
-    memset(EVT.joyPrev,0,sizeof(EVT.joyPrev));
-    EVT.joyButState = 0;
-    if ((tmp = getenv(ENV_JOYDEV0)) != NULL)
-	strcpy(joystick0_dev,tmp);
-    if ((tmp = getenv(ENV_JOYDEV1)) != NULL)
-	strcpy(joystick1_dev,tmp);
-    if ((joystick0_fd = open(joystick0_dev, O_RDONLY)) < 0)
-	joystick0_fd = 0;
-    if ((joystick1_fd = open(joystick1_dev, O_RDONLY)) < 0)
-	joystick1_fd = 0;
-    if (!joystick0_fd && !joystick1_fd) /* No joysticks detected */
-	return 0;
-    inited = true;
-    if (ioctl(joystick0_fd ? joystick0_fd : joystick1_fd, JSIOCGVERSION, &js_version) < 0)
-	return 0;
-
-    /* Initialise joystick 0 */
-    if (joystick0_fd) {
-	ioctl(joystick0_fd, JSIOCGNAME(sizeof(name0)), name0);
-	if (js_version & ~0xffff) {
-	    struct js_event js;
-
-	    ioctl(joystick0_fd, JSIOCGAXES, &js0_axes);
-	    ioctl(joystick0_fd, JSIOCGBUTTONS, &js0_buttons);
-	    axis0 = PM_calloc((int)js0_axes, sizeof(short));
-	    buts0 = PM_malloc((int)js0_buttons);
-	    /* Read the initial events */
-	    while(dataReady(joystick0_fd)
-		  && read(joystick0_fd, &js, sizeof(struct js_event)) == sizeof(struct js_event)
-		  && (js.type & JS_EVENT_INIT)
-		  ) {
-		if (js.type & JS_EVENT_BUTTON)
-		    buts0[js.number] = js.value;
-		else if (js.type & JS_EVENT_AXIS)
-		    axis0[js.number] = scaleJoyAxis(js.value,js.number);
-		}
-	    }
-	else {
-	    js0_axes = 2;
-	    js0_buttons = 2;
-	    axis0 = PM_calloc((int)js0_axes, sizeof(short));
-	    buts0 = PM_malloc((int)js0_buttons);
-	    }
-	}
-
-    /* Initialise joystick 1 */
-    if (joystick1_fd) {
-	ioctl(joystick1_fd, JSIOCGNAME(sizeof(name1)), name1);
-	if (js_version & ~0xffff) {
-	    struct js_event js;
-
-	    ioctl(joystick1_fd, JSIOCGAXES, &js1_axes);
-	    ioctl(joystick1_fd, JSIOCGBUTTONS, &js1_buttons);
-	    axis1 = PM_calloc((int)js1_axes, sizeof(short));
-	    buts1 = PM_malloc((int)js1_buttons);
-	    /* Read the initial events */
-	    while(dataReady(joystick1_fd)
-		  && read(joystick1_fd, &js, sizeof(struct js_event))==sizeof(struct js_event)
-		  && (js.type & JS_EVENT_INIT)
-		  ) {
-		if (js.type & JS_EVENT_BUTTON)
-		    buts1[js.number] = js.value;
-		else if (js.type & JS_EVENT_AXIS)
-		    axis1[js.number] = scaleJoyAxis(js.value,js.number<<2);
-		}
-	    }
-	else {
-	    js1_axes = 2;
-	    js1_buttons = 2;
-	    axis1 = PM_calloc((int)js1_axes, sizeof(short));
-	    buts1 = PM_malloc((int)js1_buttons);
-	    }
-	}
-
-#ifdef  CHECKED
-    fprintf(stderr,"Using joystick driver version %d.%d.%d\n",
-	    js_version >> 16, (js_version >> 8) & 0xff, js_version & 0xff);
-    if (joystick0_fd)
-	fprintf(stderr,"Joystick 1 (%s): %s\n", joystick0_dev, name0);
-    if (joystick1_fd)
-	fprintf(stderr,"Joystick 2 (%s): %s\n", joystick1_dev, name1);
-#endif
-    mask = _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-    if (mask) {
-	for (i = 0; i < JOY_NUM_AXES; i++)
-	    EVT.joyMax[i] = EVT.joyCenter[i]*2;
-	}
-    return mask;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note:   Most analogue joysticks will provide readings that change even
-	though the joystick has not moved. Hence if you call this routine
-	you will likely get an EVT_JOYMOVE event every time through your
-	event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
-    event_t evt;
-    int     i,axis[JOY_NUM_AXES],newButState,mask,moved,ps;
-
-    if ((js_version & ~0xFFFF) == 0 && EVT.joyMask) {
-	/* Read joystick axes and post movement events if they have
-	 * changed since the last time we polled. Until the events are
-	 * actually flushed, we keep modifying the same joystick movement
-	 * event, so you won't get multiple movement event
-	 */
-	mask = _EVT_readJoyAxis(EVT.joyMask,axis);
-	newButState = _EVT_readJoyButtons();
-	moved = false;
-	for (i = 0; i < JOY_NUM_AXES; i++) {
-	    if (mask & (EVT_JOY_AXIS_X1 << i))
-		axis[i] = scaleJoyAxis(axis[i],i);
-	    else
-		axis[i] = EVT.joyPrev[i];
-	    if (axis[i] != EVT.joyPrev[i])
-		moved = true;
-	    }
-	if (moved) {
-	    memcpy(EVT.joyPrev,axis,sizeof(EVT.joyPrev));
-	    ps = _EVT_disableInt();
-	    if (EVT.oldJoyMove != -1) {
-		/* Modify the existing joystick movement event */
-		EVT.evtq[EVT.oldJoyMove].message = newButState;
-		EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
-		EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
-		EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
-		EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
-		}
-	    else if (EVT.count < EVENTQSIZE) {
-		/* Add a new joystick movement event */
-		EVT.oldJoyMove = EVT.freeHead;
-		memset(&evt,0,sizeof(evt));
-		evt.what = EVT_JOYMOVE;
-		evt.message = EVT.joyButState;
-		evt.where_x = EVT.joyPrev[0];
-		evt.where_y = EVT.joyPrev[1];
-		evt.relative_x = EVT.joyPrev[2];
-		evt.relative_y = EVT.joyPrev[3];
-		addEvent(&evt);
-		}
-	    _EVT_restoreInt(ps);
-	    }
-
-	/* Read the joystick buttons, and post events to reflect the change
-	 * in state for the joystick buttons.
-	 */
-	if (newButState != EVT.joyButState) {
-	    if (EVT.count < EVENTQSIZE) {
-		/* Add a new joystick movement event */
-		ps = _EVT_disableInt();
-		memset(&evt,0,sizeof(evt));
-		evt.what = EVT_JOYCLICK;
-		evt.message = newButState;
-		EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
-		EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
-		EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
-		EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
-		addEvent(&evt);
-		_EVT_restoreInt(ps);
-		}
-	    EVT.joyButState = newButState;
-	    }
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMin);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMax);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
-    _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Linux into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    event_t                 evt;
-    int                     i,numkeys, c;
-    ibool                   release;
-    static struct kbentry   ke;
-    static char             buf[KBDREADBUFFERSIZE];
-    static ushort           repeatKey[128] = {0};
-
-    /* Poll keyboard events */
-    while (dataReady(_PM_console_fd) && (numkeys = read(_PM_console_fd, buf, KBDREADBUFFERSIZE)) > 0) {
-	for (i = 0; i < numkeys; i++) {
-	    c = buf[i];
-	    release = c & 0x80;
-	    c &= 0x7F;
-
-	    /* TODO:    This is wrong! We need this to be the time stamp at */
-	    /*          ** interrupt ** time!! One solution would be to */
-	    /*          put the keyboard and mouse polling loops into */
-	    /*          a separate thread that can block on I/O to the */
-	    /*          necessay file descriptor. */
-	    evt.when = _EVT_getTicks();
-
-	    if (release) {
-		/* Key released */
-		evt.what = EVT_KEYUP;
-		switch (c) {
-		    case KB_leftShift:
-			_PM_modifiers &= ~EVT_LEFTSHIFT;
-			break;
-		    case KB_rightShift:
-			_PM_modifiers &= ~EVT_RIGHTSHIFT;
-			break;
-		    case 29:
-			_PM_modifiers &= ~(EVT_LEFTCTRL|EVT_CTRLSTATE);
-			break;
-		    case 97:            /* Control */
-			_PM_modifiers &= ~EVT_CTRLSTATE;
-			break;
-		    case 56:
-			_PM_modifiers &= ~(EVT_LEFTALT|EVT_ALTSTATE);
-			break;
-		    case 100:
-			_PM_modifiers &= ~EVT_ALTSTATE;
-			break;
-		    default:
-		    }
-		evt.modifiers = _PM_modifiers;
-		evt.message = keyUpMsg[c];
-		if (EVT.count < EVENTQSIZE)
-		    addEvent(&evt);
-		keyUpMsg[c] = 0;
-		repeatKey[c] = 0;
-		}
-	    else {
-		/* Key pressed */
-		evt.what = EVT_KEYDOWN;
-		switch (c) {
-		    case KB_leftShift:
-			_PM_modifiers |= EVT_LEFTSHIFT;
-			break;
-		    case KB_rightShift:
-			_PM_modifiers |= EVT_RIGHTSHIFT;
-			break;
-		    case 29:
-			_PM_modifiers |= EVT_LEFTCTRL|EVT_CTRLSTATE;
-			break;
-		    case 97:            /* Control */
-			_PM_modifiers |= EVT_CTRLSTATE;
-			break;
-		    case 56:
-			_PM_modifiers |= EVT_LEFTALT|EVT_ALTSTATE;
-			break;
-		    case 100:
-			_PM_modifiers |= EVT_ALTSTATE;
-			break;
-		    case KB_capsLock:   /* Caps Lock */
-			_PM_leds ^= LED_CAP;
-			ioctl(_PM_console_fd, KDSETLED, _PM_leds);
-			break;
-		    case KB_numLock:    /* Num Lock */
-			_PM_leds ^= LED_NUM;
-			ioctl(_PM_console_fd, KDSETLED, _PM_leds);
-			break;
-		    case KB_scrollLock: /* Scroll Lock */
-			_PM_leds ^= LED_SCR;
-			ioctl(_PM_console_fd, KDSETLED, _PM_leds);
-			break;
-		    default:
-		    }
-		evt.modifiers = _PM_modifiers;
-		if (keyUpMsg[c]) {
-		    evt.what = EVT_KEYREPEAT;
-		    evt.message = keyUpMsg[c] | (repeatKey[c]++ << 16);
-		    }
-		else {
-		    int asc;
-
-		    evt.message = getKeyMapping(keymaps, NB_KEYMAPS, c) << 8;
-		    ke.kb_index = c;
-		    ke.kb_table = 0;
-		    if ((_PM_modifiers & EVT_SHIFTKEY) || (_PM_leds & LED_CAP))
-			ke.kb_table |= K_SHIFTTAB;
-		    if (_PM_modifiers & (EVT_LEFTALT | EVT_ALTSTATE))
-			ke.kb_table |= K_ALTTAB;
-		    if (ioctl(_PM_console_fd, KDGKBENT, (unsigned long)&ke)<0)
-			perror("ioctl(KDGKBENT)");
-		    if ((_PM_leds & LED_NUM) && (getKeyMapping(keypad, NB_KEYPAD, c)!=c)) {
-			asc = getKeyMapping(keypad, NB_KEYPAD, c);
-			}
-		    else {
-			switch (c) {
-			    case 14:
-				asc = ASCII_backspace;
-				break;
-			    case 15:
-				asc = ASCII_tab;
-				break;
-			    case 28:
-			    case 96:
-				asc = ASCII_enter;
-				break;
-			    case 1:
-				asc = ASCII_esc;
-			    default:
-				asc = ke.kb_value & 0xFF;
-				if (asc < 0x1B)
-				    asc = 0;
-				break;
-			    }
-			}
-		    if ((_PM_modifiers & (EVT_CTRLSTATE|EVT_LEFTCTRL)) && isalpha(asc))
-			evt.message |= toupper(asc) - 'A' + 1;
-		    else
-			evt.message |= asc;
-		    keyUpMsg[c] = evt.message;
-		    repeatKey[c]++;
-		    }
-		if (EVT.count < EVENTQSIZE)
-		    addEvent(&evt);
-		}
-	    }
-	}
-
-    /* Poll mouse events */
-    if (_EVT_mouse_fd) {
-	int         dx, dy, buts;
-	static int  oldbuts;
-
-	while (dataReady(_EVT_mouse_fd)) {
-	    if (readMouseData(&buts, &dx, &dy)) {
-		EVT.mx += dx;
-		EVT.my += dy;
-		if (EVT.mx < 0) EVT.mx = 0;
-		if (EVT.my < 0) EVT.my = 0;
-		if (EVT.mx > range_x) EVT.mx = range_x;
-		if (EVT.my > range_y) EVT.my = range_y;
-		evt.where_x = EVT.mx;
-		evt.where_y = EVT.my;
-		evt.relative_x = dx;
-		evt.relative_y = dy;
-
-		/* TODO:    This is wrong! We need this to be the time stamp at */
-		/*          ** interrupt ** time!! One solution would be to */
-		/*          put the keyboard and mouse polling loops into */
-		/*          a separate thread that can block on I/O to the */
-		/*          necessay file descriptor. */
-		evt.when = _EVT_getTicks();
-		evt.modifiers = _PM_modifiers;
-		if (buts & 4)
-		    evt.modifiers |= EVT_LEFTBUT;
-		if (buts & 1)
-		    evt.modifiers |= EVT_RIGHTBUT;
-		if (buts & 2)
-		    evt.modifiers |= EVT_MIDDLEBUT;
-
-		/* Left click events */
-		if ((buts&4) != (oldbuts&4)) {
-		    if (buts&4)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_LEFTBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Right click events */
-		if ((buts&1) != (oldbuts&1)) {
-		    if (buts&1)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_RIGHTBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Middle click events */
-		if ((buts&2) != (oldbuts&2)) {
-		    if (buts&2)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_MIDDLEBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Mouse movement event */
-		if (dx || dy) {
-		    evt.what = EVT_MOUSEMOVE;
-		    evt.message = 0;
-		    if (EVT.oldMove != -1) {
-			/* Modify existing movement event */
-			EVT.evtq[EVT.oldMove].where_x = evt.where_x;
-			EVT.evtq[EVT.oldMove].where_y = evt.where_y;
-			}
-		    else {
-			/* Save id of this movement event */
-			EVT.oldMove = EVT.freeHead;
-			if (EVT.count < EVENTQSIZE)
-			    addEvent(&evt);
-			}
-		    }
-		oldbuts = buts;
-		}
-	    }
-	}
-
-#ifdef USE_OS_JOYSTICK
-    /* Poll joystick events using the 1.x joystick driver API in the 2.2 kernels */
-    if (js_version & ~0xffff) {
-	static struct js_event  js;
-
-	/* Read joystick axis 0 */
-	evt.when = 0;
-	evt.modifiers = _PM_modifiers;
-	if (joystick0_fd && dataReady(joystick0_fd) &&
-		read(joystick0_fd, &js, sizeof(js)) == sizeof(js)) {
-	    if (js.type & JS_EVENT_BUTTON) {
-		if (js.number < 2) { /* Only 2 buttons for now :( */
-		    buts0[js.number] = js.value;
-		    evt.what = EVT_JOYCLICK;
-		    makeJoyEvent(&evt);
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-		}
-	    else if (js.type & JS_EVENT_AXIS) {
-		axis0[js.number] = scaleJoyAxis(js.value,js.number);
-		evt.what = EVT_JOYMOVE;
-		if (EVT.oldJoyMove != -1) {
-		    makeJoyEvent(&EVT.evtq[EVT.oldJoyMove]);
-		    }
-		else if (EVT.count < EVENTQSIZE) {
-		    EVT.oldJoyMove = EVT.freeHead;
-		    makeJoyEvent(&evt);
-		    addEvent(&evt);
-		    }
-		}
-	    }
-
-	/* Read joystick axis 1 */
-	if (joystick1_fd && dataReady(joystick1_fd) &&
-		read(joystick1_fd, &js, sizeof(js))==sizeof(js)) {
-	    if (js.type & JS_EVENT_BUTTON) {
-		if (js.number < 2) { /* Only 2 buttons for now :( */
-		    buts1[js.number] = js.value;
-		    evt.what = EVT_JOYCLICK;
-		    makeJoyEvent(&evt);
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-		}
-	    else if (js.type & JS_EVENT_AXIS) {
-		axis1[js.number] = scaleJoyAxis(js.value,js.number<<2);
-		evt.what = EVT_JOYMOVE;
-		if (EVT.oldJoyMove != -1) {
-		    makeJoyEvent(&EVT.evtq[EVT.oldJoyMove]);
-		    }
-		else if (EVT.count < EVENTQSIZE) {
-		    EVT.oldJoyMove = EVT.freeHead;
-		    makeJoyEvent(&evt);
-		    addEvent(&evt);
-		    }
-		}
-	    }
-	}
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift _PM_modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Set the speed of the serial port
-****************************************************************************/
-static int setspeed(
-    int fd,
-    int old,
-    int new,
-    unsigned short flags)
-{
-    struct termios tty;
-    char *c;
-
-    tcgetattr(fd, &tty);
-    tty.c_iflag = IGNBRK | IGNPAR;
-    tty.c_oflag = 0;
-    tty.c_lflag = 0;
-    tty.c_line = 0;
-    tty.c_cc[VTIME] = 0;
-    tty.c_cc[VMIN] = 1;
-    switch (old) {
-	case 9600:  tty.c_cflag = flags | B9600; break;
-	case 4800:  tty.c_cflag = flags | B4800; break;
-	case 2400:  tty.c_cflag = flags | B2400; break;
-	case 1200:
-	default:    tty.c_cflag = flags | B1200; break;
-	}
-    tcsetattr(fd, TCSAFLUSH, &tty);
-    switch (new) {
-	case 9600:  c = "*q";  tty.c_cflag = flags | B9600; break;
-	case 4800:  c = "*p";  tty.c_cflag = flags | B4800; break;
-	case 2400:  c = "*o";  tty.c_cflag = flags | B2400; break;
-	case 1200:
-	default:    c = "*n";  tty.c_cflag = flags | B1200; break;
-	}
-    write(fd, c, 2);
-    usleep(100000);
-    tcsetattr(fd, TCSAFLUSH, &tty);
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Generic mouse driver init code
-****************************************************************************/
-static void _EVT_mouse_init(void)
-{
-    int i;
-
-    /* Change from any available speed to the chosen one */
-    for (i = 9600; i >= 1200; i /= 2)
-	setspeed(_EVT_mouse_fd, i, opt_baud, mouse_infos[mouse_driver].flags);
-}
-
-/****************************************************************************
-REMARKS:
-Logitech mouse driver init code
-****************************************************************************/
-static void _EVT_logitech_init(void)
-{
-    int         i;
-    struct stat buf;
-    int         busmouse;
-
-    /* is this a serial- or a bus- mouse? */
-    if (fstat(_EVT_mouse_fd,&buf) == -1)
-	perror("fstat");
-    i = MAJOR(buf.st_rdev);
-    if (stat("/dev/ttyS0",&buf) == -1)
-	perror("stat");
-    busmouse=(i != MAJOR(buf.st_rdev));
-
-    /* Fix the howmany field, so that serial mice have 1, while busmice have 3 */
-    mouse_infos[mouse_driver].read = busmouse ? 3 : 1;
-
-    /* Change from any available speed to the chosen one */
-    for (i = 9600; i >= 1200; i /= 2)
-	setspeed(_EVT_mouse_fd, i, opt_baud, mouse_infos[mouse_driver].flags);
-
-    /* This stuff is peculiar of logitech mice, also for the serial ones */
-    write(_EVT_mouse_fd, "S", 1);
-    setspeed(_EVT_mouse_fd, opt_baud, opt_baud,CS8 |PARENB |PARODD |CREAD |CLOCAL |HUPCL);
-
-    /* Configure the sample rate */
-    for (i = 0; opt_sample <= sampletab[i].sample; i++)
-	;
-    write(_EVT_mouse_fd,sampletab[i].code,1);
-}
-
-/****************************************************************************
-REMARKS:
-Microsoft Intellimouse init code
-****************************************************************************/
-static void _EVT_pnpmouse_init(void)
-{
-    struct termios tty;
-
-    tcgetattr(_EVT_mouse_fd, &tty);
-    tty.c_iflag = IGNBRK | IGNPAR;
-    tty.c_oflag = 0;
-    tty.c_lflag = 0;
-    tty.c_line = 0;
-    tty.c_cc[VTIME] = 0;
-    tty.c_cc[VMIN] = 1;
-    tty.c_cflag = mouse_infos[mouse_driver].flags | B1200;
-    tcsetattr(_EVT_mouse_fd, TCSAFLUSH, &tty); /* set parameters */
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    int         i;
-    char        *tmp;
-
-    /* Initialise the event queue */
-    EVT.mouseMove = mouseMove;
-    initEventQueue();
-    for (i = 0; i < 256; i++)
-	keyUpMsg[i] = 0;
-
-    /* Keyboard initialization */
-    if (_PM_console_fd == -1)
-	PM_fatalError("You must first call PM_openConsole to use the EVT functions!");
-    _PM_keyboard_rawmode();
-    fcntl(_PM_console_fd,F_SETFL,fcntl(_PM_console_fd,F_GETFL) | O_NONBLOCK);
-
-    /* Mouse initialization */
-    if ((tmp = getenv(ENV_MOUSEDRV)) != NULL) {
-	for (i = 0; i < NB_MICE; i++) {
-	    if (!strcasecmp(tmp, mouse_infos[i].name)) {
-		mouse_driver = i;
-		break;
-		}
-	    }
-	if (i == NB_MICE) {
-	    fprintf(stderr,"Unknown mouse driver: %s\n", tmp);
-	    mouse_driver = EVT_noMouse;
-	    _EVT_mouse_fd = 0;
-	    }
-	}
-    if (mouse_driver != EVT_noMouse) {
-	if (mouse_driver == EVT_gpm)
-	    strcpy(mouse_dev,"/dev/gpmdata");
-	if ((tmp = getenv(ENV_MOUSEDEV)) != NULL)
-	    strcpy(mouse_dev,tmp);
-#ifdef  CHECKED
-	fprintf(stderr,"Using the %s MGL mouse driver on %s.\n", mouse_infos[mouse_driver].name, mouse_dev);
-#endif
-	if ((_EVT_mouse_fd = open(mouse_dev, O_RDWR)) < 0) {
-	    perror("open");
-	    fprintf(stderr, "Unable to open mouse device %s, dropping mouse support.\n", mouse_dev);
-	    sleep(1);
-	    mouse_driver = EVT_noMouse;
-	    _EVT_mouse_fd = 0;
-	    }
-	else {
-	    char c;
-
-	    /* Init and flush the mouse pending input queue */
-	    if (mouse_infos[mouse_driver].init)
-		mouse_infos[mouse_driver].init();
-	    while(dataReady(_EVT_mouse_fd) && read(_EVT_mouse_fd, &c, 1) == 1)
-		;
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    range_x = xRes;
-    range_y = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for Linux */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for Linux */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    _PM_restore_kb_mode();
-    if (_EVT_mouse_fd) {
-	close(_EVT_mouse_fd);
-	_EVT_mouse_fd = 0;
-	}
-#ifdef USE_OS_JOYSTICK
-    if (joystick0_fd) {
-	close(joystick0_fd);
-	free(axis0);
-	free(buts0);
-	joystick0_fd = 0;
-	}
-    if (joystick1_fd) {
-	close(joystick1_fd);
-	free(axis1);
-	free(buts1);
-	joystick1_fd = 0;
-	}
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga b/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga
deleted file mode 100644
index c0358a0f8a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga
+++ /dev/null
@@ -1,1058 +0,0 @@
-/****************************************************************************
-*
-*           The SuperVGA Kit - UniVBE Software Development Kit
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  IBM PC (MS DOS)
-*
-* Description:  Routines to provide a Linux event queue, which automatically
-*               handles keyboard and mouse events for the Linux compatability
-*               libraries. Based on the event handling code in the MGL.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <ctype.h>
-#include <termios.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/vt.h>
-#include <gpm.h>
-#include "pm.h"
-#include "vesavbe.h"
-#include "wdirect.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define EVENTQSIZE  100             /* Number of events in event queue  */
-
-static int      head = -1;          /* Head of event queue              */
-static int      tail = -1;          /* Tail of event queue              */
-static int      freeHead = -1;      /* Head of free list                */
-static int      count = 0;          /* No. of items currently in queue  */
-static WD_event evtq[EVENTQSIZE];   /* The queue structure itself      */
-static int      oldMove = -1;       /* Previous movement event          */
-static int      oldKey = -1;        /* Previous key repeat event        */
-static int      mx,my;              /* Current mouse position           */
-static int      xRes,yRes;          /* Screen resolution coordinates    */
-static void     *stateBuf;          /* Pointer to console state buffer  */
-static int      conn;               /* GPM file descriptor for mouse handling */
-static int      tty_fd;             /* File descriptor for /dev/console */
-extern int      tty_vc;             /* Virtual console ID, from the PM/Pro library */
-static ibool    key_down[128];      /* State of all keyboard keys       */
-static struct termios old_conf;     /* Saved terminal configuration     */
-static int      oldkbmode;          /* and previous keyboard mode       */
-struct vt_mode  oldvtmode;          /* Old virtual terminal mode        */
-static int      old_flags;          /* Old flags for fcntl              */
-static ulong    key_modifiers;      /* Keyboard modifiers               */
-static int      forbid_vt_release=0;/* Flag to forbid release of VT     */
-static int      forbid_vt_acquire=0;/* Flag to forbid cature of VT      */
-static int      oldmode;            /* Old SVGA mode saved for VT switch*/
-static int      initmode;           /* Initial text mode                */
-static ibool    installed = false;  /* True if we are installed         */
-static void     (_ASMAPI *moveCursor)(int x,int y) = NULL;
-static int      (_ASMAPI *suspendAppCallback)(int flags) = NULL;
-
-#if 0
-/* Keyboard Translation table from scancodes to ASCII */
-
-static uchar keyTable[128] =
-"\0\0331234567890-=\010"
-"\011qwertyuiop[]\015"
-"\0asdfghjkl;'`\0\\"
-"zxcvbnm,./\0*\0 \0"
-"\0\0\0\0\0\0\0\0\0\0\0\0"      /* Function keys */
-"789-456+1230.\0\0\0\0\0"       /* Keypad keys */
-"\0\0\0\0\0\0\0\015\0/";
-
-static uchar keyTableShifted[128] =
-"\0\033!@#$%^&*()_+\010"
-"\011QWERTYUIOP{}\015"
-"\0ASDFGHJKL:\"~\0|"
-"ZXCVBNM<>?\0*\0 \0"
-"\0\0\0\0\0\0\0\0\0\0\0\0"      /* Function keys */
-"789-456+1230.\0\0\0\0\0"       /* Keypad keys */
-"\0\0\0\0\0\0\0\015\0/";
-#endif
-
-/* Macros to keep track of the CAPS and NUM lock states */
-
-#define EVT_CAPSSTATE   0x0100
-#define EVT_NUMSTATE    0x0200
-
-/* Helper macros for dealing with timers */
-
-#define TICKS_TO_USEC(t) ((t)*65536.0/1.193180)
-#define USEC_TO_TICKS(u) ((u)*1.193180/65536.0)
-
-/* Number of keycodes to read at a time from the console */
-
-#define KBDREADBUFFERSIZE 32
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Returns the current time stamp in units of 18.2 ticks per second.
-****************************************************************************/
-static ulong getTimeStamp(void)
-{
-    return (ulong)(clock() / (CLOCKS_PER_SEC / 18.2));
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to place onto event queue
-
-REMARKS:
-Adds an event to the event queue by tacking it onto the tail of the event
-queue. This routine assumes that at least one spot is available on the
-freeList for the event to be inserted.
-****************************************************************************/
-static void addEvent(
-    WD_event *evt)
-{
-    int         evtID;
-
-    /* Get spot to place the event from the free list */
-    evtID = freeHead;
-    freeHead = evtq[freeHead].next;
-
-    /* Add to the tail of the event queue   */
-    evt->next = -1;
-    evt->prev = tail;
-    if (tail != -1)
-        evtq[tail].next = evtID;
-    else
-        head = evtID;
-    tail = evtID;
-    evtq[evtID] = *evt;
-    count++;
-}
-
-/****************************************************************************
-PARAMETERS:
-what        - Event code
-message     - Event message
-modifiers   - keyboard modifiers
-x           - Mouse X position at time of event
-y           - Mouse Y position at time of event
-but_stat    - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from
-within the mouse interrupt subroutine, so it must be efficient.
-****************************************************************************/
-static void addMouseEvent(
-    uint what,
-    uint message,
-    int x,
-    int y,
-    uint but_stat)
-{
-    WD_event    evt;
-
-    if (count < EVENTQSIZE) {
-        evt.what = what;
-        evt.when = getTimeStamp();
-        evt.message = message;
-        evt.modifiers = but_stat | key_modifiers;
-        evt.where_x = x;
-        evt.where_y = y;
-        fprintf(stderr, "(%d,%d), buttons %ld\n", x,y, evt.modifiers);
-        addEvent(&evt);                 /* Add to tail of event queue   */
-        }
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode    - Raw keyboard scan code
-modifiers   - Keyboard modifiers flags
-
-REMARKS:
-Converts the raw scan code into the appropriate ASCII code using the scan
-code and the keyboard modifier flags.
-****************************************************************************/
-static ulong getKeyMessage(
-    uint scancode,
-    ulong modifiers)
-{
-    ushort  code = scancode << 8;
-    ushort  ascii;
-    struct kbentry ke;
-
-    ke.kb_index = scancode;
-
-    /* Find the basic ASCII code for the scan code */
-    if (modifiers & EVT_CAPSSTATE) {
-        if (modifiers & EVT_SHIFTKEY)
-          ke.kb_table = K_NORMTAB;
-        //          ascii = tolower(keyTableShifted[scancode]);
-        else
-          ke.kb_table = K_SHIFTTAB;
-        //          ascii = toupper(keyTable[scancode]);
-        }
-    else {
-        if (modifiers & EVT_SHIFTKEY)
-          ke.kb_table = K_SHIFTTAB;
-          // ascii = keyTableShifted[scancode];
-        else
-          ke.kb_table = K_NORMTAB;
-          // ascii = keyTable[scancode];
-        }
-    if(modifiers & EVT_ALTSTATE)
-      ke.kb_table |= K_ALTTAB;
-
-    if (ioctl(tty_fd, KDGKBENT, (unsigned long)&ke)) {
-        fprintf(stderr, "KDGKBENT at index %d in table %d: ",
-            scancode, ke.kb_table);
-        return 0;
-    }
-    ascii = ke.kb_value;
-
-    /* Add ASCII code if key is not alt'ed or ctrl'ed */
-    if (!(modifiers & (EVT_ALTSTATE | EVT_CTRLSTATE)))
-        code |= ascii;
-
-    return code;
-}
-
-/****************************************************************************
-PARAMETERS:
-what        - Event code
-scancode    - Raw scancode of keyboard event to add
-
-REMARKS:
-Adds a new keyboard event to the event queue. We only take KEYUP and
-KEYDOWN event codes, however if a key is already down we convert the KEYDOWN
-to a KEYREPEAT.
-****************************************************************************/
-static void addKeyEvent(
-    uint what,
-    uint scancode)
-{
-    WD_event    evt;
-
-    if (count < EVENTQSIZE) {
-        evt.what = what;
-        evt.when = getTimeStamp();
-        evt.message = getKeyMessage(scancode,key_modifiers) | 0x10000UL;
-        evt.where_x = evt.where_y = 0;
-        evt.modifiers = key_modifiers;
-        if (evt.what == EVT_KEYUP)
-            key_down[scancode] = false;
-        else if (evt.what == EVT_KEYDOWN) {
-            if (key_down[scancode]) {
-                if (oldKey != -1) {
-                    evtq[oldKey].message += 0x10000UL;
-                    }
-                else {
-                    evt.what = EVT_KEYREPEAT;
-                    oldKey = freeHead;
-                    addEvent(&evt);
-                    oldMove = -1;
-                    }
-                return;
-                }
-            key_down[scancode] = true;
-            }
-
-        addEvent(&evt);
-        oldMove = -1;
-        }
-}
-
-/****************************************************************************
-PARAMETERS:
-sig - Signal being sent to this signal handler
-
-REMARKS:
-Signal handler for the timer. This routine takes care of periodically
-posting timer events to the event queue.
-****************************************************************************/
-void timerHandler(
-    int sig)
-{
-    WD_event    evt;
-
-    if (sig == SIGALRM) {
-        if (count < EVENTQSIZE) {
-            evt.when = getTimeStamp();
-            evt.what = EVT_TIMERTICK;
-            evt.message = 0;
-            evt.where_x = evt.where_y = 0;
-            evt.modifiers = 0;
-            addEvent(&evt);
-            oldMove = -1;
-            oldKey = -1;
-            }
-        signal(SIGALRM, timerHandler);
-        }
-}
-
-/****************************************************************************
-REMARKS:
-Restore the terminal to normal operation on exit
-****************************************************************************/
-static void restore_term(void)
-{
-    RMREGS  regs;
-
-    if (installed) {
-        /* Restore text mode and the state of the console */
-        regs.x.ax = 0x3;
-        PM_int86(0x10,&regs,&regs);
-        PM_restoreConsoleState(stateBuf,tty_fd);
-
-        /* Restore console to normal operation */
-        ioctl(tty_fd, VT_SETMODE, &oldvtmode);
-        ioctl(tty_fd, KDSKBMODE, oldkbmode);
-        tcsetattr(tty_fd, TCSAFLUSH, &old_conf);
-        fcntl(tty_fd,F_SETFL,old_flags &= ~O_NONBLOCK);
-        PM_closeConsole(tty_fd);
-
-        /* Close the mouse driver */
-        close(conn);
-
-        /* Flag that we are not no longer installed */
-        installed = false;
-        }
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler to capture forced program termination conditions so that
-we can clean up properly.
-****************************************************************************/
-static void exitHandler(int sig)
-{
-    exit(-1);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep until the virtual terminal is active
-****************************************************************************/
-void wait_vt_active(void)
-{
-    while (ioctl(tty_fd, VT_WAITACTIVE, tty_vc) < 0) {
-        if ((errno != EAGAIN) && (errno != EINTR)) {
-            perror("ioctl(VT_WAITACTIVE)");
-            exit(1);
-            }
-        usleep(150000);
-        }
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler called when our virtual terminal has been released and we are
-losing the active focus.
-****************************************************************************/
-static void release_vt_signal(int n)
-{
-    forbid_vt_acquire = 1;
-    if (forbid_vt_release) {
-        forbid_vt_acquire = 0;
-        ioctl(tty_fd, VT_RELDISP, 0);
-        return;
-        }
-
-    // TODO: Call the user supplied suspendAppCallback and restore text
-    //       mode (saving the existing mode so we can restore it).
-    //
-    //       Also if the suspendAppCallback is NULL then we have to
-    //       ignore the switch request!
-    if(suspendAppCallback){
-      oldmode = VBE_getVideoMode();
-      suspendAppCallback(true);
-      VBE_setVideoMode(initmode);
-    }
-
-    ioctl(tty_fd, VT_RELDISP, 1);
-    forbid_vt_acquire = 0;
-    wait_vt_active();
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler called when our virtual terminal has been re-aquired and we
-are now regaiing the active focus.
-****************************************************************************/
-static void acquire_vt_signal(int n)
-{
-    forbid_vt_release = 1;
-    if (forbid_vt_acquire) {
-        forbid_vt_release = 0;
-        return;
-        }
-
-    // TODO: Restore the old display mode, call the user suspendAppCallback
-    //       and and we will be back in graphics mode.
-
-    if(suspendAppCallback){
-      VBE_setVideoMode(oldmode);
-      suspendAppCallback(false);
-    }
-
-    ioctl(tty_fd, VT_RELDISP, VT_ACKACQ);
-    forbid_vt_release = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the action for a specific signal to call our signal handler.
-****************************************************************************/
-static void set_sigaction(int sig,void (*handler)(int))
-{
-    struct sigaction    siga;
-
-    siga.sa_handler = handler;
-    siga.sa_flags = SA_RESTART;
-    memset(&(siga.sa_mask), 0, sizeof(sigset_t));
-    sigaction(sig, &siga, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Function to take over control of VT switching so that we can capture
-virtual terminal release and aquire signals, allowing us to properly
-support VT switching while in graphics modes.
-****************************************************************************/
-static void take_vt_control(void)
-{
-    struct vt_mode      vtmode;
-
-    ioctl(tty_fd, VT_GETMODE, &vtmode);
-    oldvtmode = vtmode;
-    vtmode.mode = VT_PROCESS;
-    vtmode.relsig = SIGUSR1;
-    vtmode.acqsig = SIGUSR2;
-    set_sigaction(SIGUSR1, release_vt_signal);
-    set_sigaction(SIGUSR2, acquire_vt_signal);
-    ioctl(tty_fd, VT_SETMODE, &oldvtmode);
-}
-
-/****************************************************************************
-REMARKS:
-Set the shift keyboard LED's based on the current keyboard modifiers flags.
-****************************************************************************/
-static void updateLEDStatus(void)
-{
-    int state = 0;
-    if (key_modifiers & EVT_CAPSSTATE)
-        state |= LED_CAP;
-    if (key_modifiers & EVT_NUMSTATE)
-        state |= LED_NUM;
-    ioctl(tty_fd,KDSETLED,state);
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode    - Raw scan code to handle
-
-REMARKS:
-Handles the shift key modifiers and keeps track of the shift key states
-so that we can return the correct ASCII codes for the keyboard.
-****************************************************************************/
-static void toggleModifiers(
-    int scancode)
-{
-    static int caps_down = 0,num_down = 0;
-
-    if (scancode & 0x80) {
-        /* Handle key-release function */
-        scancode &= 0x7F;
-        if (scancode == 0x2A || scancode == 0x36)
-            key_modifiers &= ~EVT_SHIFTKEY;
-        else if (scancode == 0x1D || scancode == 0x61)
-            key_modifiers &= ~EVT_CTRLSTATE;
-        else if (scancode == 0x38 || scancode == 0x64)
-            key_modifiers &= ~EVT_ALTSTATE;
-        else if (scancode == 0x3A)
-            caps_down = false;
-        else if (scancode == 0x45)
-            num_down = false;
-        }
-    else {
-        /* Handle key-down function */
-        scancode &= 0x7F;
-        if (scancode == 0x2A || scancode == 0x36)
-            key_modifiers |= EVT_SHIFTKEY;
-        else if (scancode == 0x1D || scancode == 0x61)
-            key_modifiers |= EVT_CTRLSTATE;
-        else if (scancode == 0x38 || scancode == 0x64)
-            key_modifiers |= EVT_ALTSTATE;
-        else if (scancode == 0x3A) {
-            if (!caps_down) {
-                key_modifiers ^= EVT_CAPSSTATE;
-                updateLEDStatus();
-                }
-            caps_down = true;
-            }
-        else if (scancode == 0x45) {
-            if (!num_down) {
-                key_modifiers ^= EVT_NUMSTATE;
-                updateLEDStatus();
-                }
-            num_down = true;
-            }
-        }
-}
-
-/***************************************************************************
-REMARKS:
-Returns the number of bits that have changed from 0 to 1
-(a negative value means the number of bits that have changed from 1 to 0) 
- **************************************************************************/
-static int compareBits(short a, short b)
-{
-    int ret = 0;
-    if( (a&1) != (b&1) ) ret += (b&1) ? 1 : -1;
-    if( (a&2) != (b&2) ) ret += (b&2) ? 1 : -1;
-    if( (a&4) != (b&4) ) ret += (b&4) ? 1 : -1;
-    return ret;
-}
-
-/***************************************************************************
-REMARKS:
-Turns off all keyboard state because we can't rely on them anymore as soon
-as we switch VT's
-***************************************************************************/
-static void keyboard_clearstate(void)
-{
-  key_modifiers = 0;
-  memset(key_down, 0, sizeof(key_down));
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all events from the console event queue into the WinDirect event queue.
-****************************************************************************/
-static void pumpEvents(void)
-{
-    static uchar    buf[KBDREADBUFFERSIZE];
-    static char     data[5];
-    static int      old_buts, old_mx, old_my;
-    static struct timeval t;
-    fd_set fds;
-    int             numkeys,i;
-    int             dx, dy, buts;
-
-    /* Read all pending keypresses from keyboard buffer and process */
-    while ((numkeys = read(tty_fd, buf, KBDREADBUFFERSIZE)) > 0) {
-        for (i = 0; i < numkeys; i++) {
-            toggleModifiers(buf[i]);
-            if (key_modifiers & EVT_ALTSTATE){
-              int fkey = 0;
-
-              // Do VT switching here for Alt+Fx keypresses
-              switch(buf[i] & 0x7F){
-              case 59 ... 68: /* F1 to F10 */
-                fkey = (buf[i] & 0x7F) - 58;
-                break;
-              case 87: /* F11 */
-              case 88: /* F12 */
-                fkey = (buf[i] & 0x7F) - 76;
-                break;
-              }
-              if(fkey){
-                struct vt_stat vts;
-                ioctl(tty_fd, VT_GETSTATE, &vts);
-                
-                if(fkey != vts.v_active){
-                  keyboard_clearstate();
-                  ioctl(tty_fd, VT_ACTIVATE, fkey);
-                }
-              }
-            }
-
-            if (buf[i] & 0x80)
-                addKeyEvent(EVT_KEYUP,buf[i] & 0x7F);
-            else
-                addKeyEvent(EVT_KEYDOWN,buf[i] & 0x7F);
-            }
-
-        // TODO: If we want to handle VC switching we will need to do it
-        //       in here so that we can switch away from the VC and then
-        //       switch back to it later. Right now VC switching is disabled
-        //       and in order to enable it we need to save/restore the state
-        //       of the graphics screen (using the suspendAppCallback and
-        //       saving/restoring the state of the current display mode).
-
-        }
-
-    /* Read all pending mouse events and process them */
-    if(conn > 0){
-        FD_ZERO(&fds);
-        FD_SET(conn, &fds);
-        t.tv_sec = t.tv_usec = 0L;
-        while (select(conn+1, &fds, NULL, NULL, &t) > 0) {
-            if(read(conn, data, 5) == 5){
-                buts = (~data[0]) & 0x07;
-                dx = (char)(data[1]) + (char)(data[3]);
-                dy = -((char)(data[2]) + (char)(data[4]));
-                
-                mx += dx; my += dy;
-                
-                if (dx || dy)
-                    addMouseEvent(EVT_MOUSEMOVE, 0, mx, my, buts);
-                
-                if (buts != old_buts){
-                    int c = compareBits(buts,old_buts);
-                    if(c>0)
-                        addMouseEvent(EVT_MOUSEDOWN, 0, mx, my, buts);
-                    else if(c<0)
-                        addMouseEvent(EVT_MOUSEUP, 0, mx, my, buts);
-                }
-                old_mx = mx; old_my = my;
-                old_buts = buts;
-                FD_SET(conn, &fds);
-                t.tv_sec = t.tv_usec = 0L;
-            }
-        }
-    }
-}
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-PARAMETERS:
-which       - Which code for event to post
-what        - Event code for event to post
-message     - Event message
-modifiers   - Shift key/mouse button modifiers
-
-RETURNS:
-True if the event was posted, false if queue is full.
-
-REMARKS:
-Posts an event to the event queue. This routine can be used to post any type
-of event into the queue.
-****************************************************************************/
-ibool _WDAPI WD_postEvent(
-    ulong which,
-    uint what,
-    ulong message,
-    ulong modifiers)
-{
-    WD_event    evt;
-
-    if (count < EVENTQSIZE) {
-        /* Save information in event record */
-        evt.which = which;
-        evt.what = what;
-        evt.when = getTimeStamp();
-        evt.message = message;
-        evt.modifiers = modifiers;
-        addEvent(&evt);             /* Add to tail of event queue   */
-        return true;
-        }
-    else
-        return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-mask    - Event mask to use
-
-REMARKS:
-Flushes all the event specified in 'mask' from the event queue.
-****************************************************************************/
-void _WDAPI WD_flushEvent(
-    uint mask)
-{
-    WD_event    evt;
-
-    do {                            /* Flush all events */
-        WD_getEvent(&evt,mask);
-        } while (evt.what != EVT_NULLEVT);
-}
-
-/****************************************************************************
-PARAMETERS:
-evt     - Place to store event
-mask    - Event mask to use
-
-REMARKS:
-Halts program execution until a specified event occurs. The event is
-returned. All pending events not in the specified mask will be ignored and
-removed from the queue.
-****************************************************************************/
-void _WDAPI WD_haltEvent(
-    WD_event *evt,
-    uint mask)
-{
-    do {                            /* Wait for an event    */
-        WD_getEvent(evt,EVT_EVERYEVT);
-        } while (!(evt->what & mask));
-}
-
-/****************************************************************************
-PARAMETERS:
-evt     - Place to store event
-mask    - Event mask to use
-
-RETURNS:
-True if an event was pending.
-
-REMARKS:
-Retrieves the next pending event defined in 'mask' from the event queue.
-The event queue is adjusted to reflect the new state after the event has
-been removed.
-****************************************************************************/
-ibool _WDAPI WD_getEvent(
-    WD_event *evt,
-    uint mask)
-{
-    int     evtID,next,prev;
-
-    pumpEvents();
-    if (moveCursor)
-        moveCursor(mx,my);                  /* Move the mouse cursor    */
-    evt->what = EVT_NULLEVT;                /* Default to null event    */
-
-    if (count) {
-        for (evtID = head; evtID != -1; evtID = evtq[evtID].next) {
-            if (evtq[evtID].what & mask)
-                break;                      /* Found an event           */
-            }
-        if (evtID == -1)
-            return false;                   /* Event was not found      */
-        next = evtq[evtID].next;
-        prev = evtq[evtID].prev;
-        if (prev != -1)
-            evtq[prev].next = next;
-        else
-            head = next;
-        if (next != -1)
-            evtq[next].prev = prev;
-        else
-            tail = prev;
-        *evt = evtq[evtID];                 /* Return the event         */
-        evtq[evtID].next = freeHead;        /* and return to free list  */
-        freeHead = evtID;
-        count--;
-        if (evt->what == EVT_MOUSEMOVE)
-            oldMove = -1;
-        if (evt->what == EVT_KEYREPEAT)
-            oldKey = -1;
-        }
-    return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-PARAMETERS:
-evt     - Place to store event
-mask    - Event mask to use
-
-RETURNS:
-True if an event is pending.
-
-REMARKS:
-Peeks at the next pending event defined in 'mask' in the event queue. The
-event is not removed from the event queue.
-****************************************************************************/
-ibool _WDAPI WD_peekEvent(
-    WD_event *evt,
-    uint mask)
-{
-    int     evtID;
-
-    pumpEvents();
-    if (moveCursor)
-        moveCursor(mx,my);                  /* Move the mouse cursor    */
-    evt->what = EVT_NULLEVT;                /* Default to null event    */
-
-    if (count) {
-        for (evtID = head; evtID != -1; evtID = evtq[evtID].next) {
-            if (evtq[evtID].what & mask)
-                break;                      /* Found an event           */
-            }
-        if (evtID == -1)
-            return false;                   /* Event was not found      */
-
-        *evt = evtq[evtID];                 /* Return the event         */
-        }
-    return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-PARAMETERS:
-hwndMain    - Handle to main window
-_xRes       - X resolution of graphics mode to be used
-_yRes       - Y resolulion of graphics mode to be used
-
-RETURNS:
-Handle to the fullscreen event window if (we return hwndMain on Linux)
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling
-ISR to be called whenever any button's are pressed or released. We also
-build the free list of events in the event queue.
-****************************************************************************/
-WD_HWND _WDAPI WD_startFullScreen(
-    WD_HWND hwndMain,
-    int _xRes,
-    int _yRes)
-{
-    int             i;
-    struct termios  conf;
-    if (!installed) {
-        Gpm_Connect gpm;
-
-        /* Build free list, and initialise global data structures */
-        for (i = 0; i < EVENTQSIZE; i++)
-            evtq[i].next = i+1;
-        evtq[EVENTQSIZE-1].next = -1;       /* Terminate list           */
-        count = freeHead = 0;
-        head = tail = -1;
-        oldMove = -1;
-        oldKey = -1;
-        xRes = _xRes;
-        yRes = _yRes;
-
-        /* Open the console device and initialise it for raw mode */
-        tty_fd = PM_openConsole();
-
-        /* Wait until virtual terminal is active and take over control */
-        wait_vt_active();
-        take_vt_control();
-
-        /* Initialise keyboard handling to raw mode */
-        if (ioctl(tty_fd, KDGKBMODE, &oldkbmode)) {
-            printf("WD_startFullScreen: cannot get keyboard mode.\n");
-            exit(-1);
-            }
-        old_flags = fcntl(tty_fd,F_GETFL);
-        fcntl(tty_fd,F_SETFL,old_flags |= O_NONBLOCK);
-        tcgetattr(tty_fd, &conf);
-        old_conf = conf;
-        conf.c_lflag &= ~(ICANON | ECHO | ECHOE | ECHOK | ECHONL | NOFLSH | ISIG);
-        conf.c_iflag &= ~(ISTRIP | IGNCR | ICRNL | INLCR | BRKINT | PARMRK | INPCK | IUCLC | IXON | IXOFF);
-        conf.c_iflag  |= (IGNBRK | IGNPAR);
-        conf.c_cc[VMIN] = 1;
-        conf.c_cc[VTIME] = 0;
-        conf.c_cc[VSUSP] = 0;
-        tcsetattr(tty_fd, TCSAFLUSH, &conf);
-        ioctl(tty_fd, KDSKBMODE, K_MEDIUMRAW);
-
-        /* Clear the keyboard state information */
-        memset(key_down, 0, sizeof(key_down));
-        ioctl(tty_fd,KDSETLED,key_modifiers = 0);
-
-        /* Initialize the mouse connection 
-           The user *MUST* run gpm with the  option -R for this to work (or have a MouseSystems mouse)
-        */
-        if(Gpm_Open(&gpm,0) > 0){ /* GPM available */
-            if ((conn = open(GPM_NODE_FIFO,O_RDONLY|O_SYNC)) < 0)
-                fprintf(stderr,"WD_startFullScreen: Can't open mouse connection.\n");
-        }else{
-            fprintf(stderr,"Warning: when not using gpm -R, only MouseSystems mice are currently supported.\n");
-            if ((conn = open("/dev/mouse",O_RDONLY|O_SYNC)) < 0)
-                fprintf(stderr,"WD_startFullScreen: Can't open /dev/mouse.\n");
-        }
-        Gpm_Close();
-
-        /* TODO: Scale the mouse coordinates to the specific resolution */
-
-        /* Save the state of the console */
-        if ((stateBuf = malloc(PM_getConsoleStateSize())) == NULL) {
-            printf("Out of memory!\n");
-            exit(-1);
-            }
-        PM_saveConsoleState(stateBuf,tty_fd);
-        initmode = VBE_getVideoMode();
-
-        /* Initialize the signal handler for timer events */
-        signal(SIGALRM, timerHandler);
-
-        /* Capture termination signals so we can clean up properly */
-        signal(SIGTERM, exitHandler);
-        signal(SIGINT, exitHandler);
-        signal(SIGQUIT, exitHandler);
-        atexit(restore_term);
-
-        /* Signal that we are installed */
-        installed = true;
-        }
-    return hwndMain;
-}
-
-/****************************************************************************
-REMARKS:
-Lets the library know when fullscreen graphics mode has been initialized so
-that we can properly scale the mouse driver coordinates.
-****************************************************************************/
-void _WDAPI WD_inFullScreen(void)
-{
-    /* Nothing to do in here */
-}
-
-/****************************************************************************
-REMARKS:
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void _WDAPI WD_restoreGDI(void)
-{
-    restore_term();
-}
-
-/****************************************************************************
-PARAMETERS:
-ticks   - Number of ticks between timer tick messages
-
-RETURNS:
-Previous value for the timer tick event spacing.
-
-REMARKS:
-The event module will automatically generate periodic timer tick events for
-you, with 'ticks' between each event posting. If you set the value of
-'ticks' to 0, the timer tick events are turned off.
-****************************************************************************/
-int _WDAPI WD_setTimerTick(
-    int ticks)
-{
-    int                 old;
-    struct itimerval    tim;
-    long                ms = TICKS_TO_USEC(ticks);
-
-    getitimer(ITIMER_REAL, &tim);
-    old = USEC_TO_TICKS(tim.it_value.tv_sec*1000000.0 + tim.it_value.tv_usec);
-    tim.it_interval.tv_sec  = ms / 1000000;
-    tim.it_interval.tv_usec = ms % 1000000;
-    setitimer(ITIMER_REAL, &tim, NULL);
-    return old;
-}
-
-/****************************************************************************
-PARAMETERS:
-saveState   - Address of suspend app callback to register
-
-REMARKS:
-Registers a user application supplied suspend application callback so that
-we can properly handle virtual terminal switching.
-****************************************************************************/
-void _WDAPI WD_setSuspendAppCallback(
-    int (_ASMAPI *saveState)(int flags))
-{
-  suspendAppCallback = saveState;
-}
-
-/****************************************************************************
-PARAMETERS:
-x   - New X coordinate to move the mouse cursor to
-y   - New Y coordinate to move the mouse cursor to
-
-REMARKS:
-Moves to mouse cursor to the specified coordinate.
-****************************************************************************/
-void _WDAPI WD_setMousePos(
-    int x,
-    int y)
-{
-    mx = x;
-    my = y;
-}
-
-/****************************************************************************
-PARAMETERS:
-x   - Place to store X coordinate of mouse cursor
-y   - Place to store Y coordinate of mouse cursor
-
-REMARKS:
-Reads the current mouse cursor location int *screen* coordinates.
-****************************************************************************/
-void _WDAPI WD_getMousePos(
-    int *x,
-    int *y)
-{
-    *x = mx;
-    *y = my;
-}
-
-/****************************************************************************
-PARAMETERS:
-mcb - Address of mouse callback function
-
-REMARKS:
-Registers an application supplied mouse callback function that is called
-whenever the mouse cursor moves.
-****************************************************************************/
-void _WDAPI WD_setMouseCallback(
-    void (_ASMAPI *mcb)(int x,int y))
-{
-    moveCursor = mcb;
-}
-
-/****************************************************************************
-PARAMETERS:
-xRes    - New X resolution of graphics mode
-yRes    - New Y resolution of graphics mode
-
-REMARKS:
-This is called to inform the event handling code that the screen resolution
-has changed so that the mouse coordinates can be scaled appropriately.
-****************************************************************************/
-void _WDAPI WD_changeResolution(
-    int xRes,
-    int yRes)
-{
-    //  Gpm_FitValues(xRes, yRes);  // ??
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode    - Scan code to check if a key is down
-
-REMARKS:
-Determines if a particular key is down based on the scan code for the key.
-****************************************************************************/
-ibool _WDAPI WD_isKeyDown(
-    uchar scancode)
-{   
-    return key_down[scancode];
-}
-
-/****************************************************************************
-REMARKS:
-Determines if the application needs to run in safe mode. Not necessary for
-anything but broken Windows 95 display drivers so we return false for
-Linux.
-****************************************************************************/
-int _WDAPI WD_isSafeMode(void)
-{
-    return false;
-}
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h
deleted file mode 100644
index eadedfb137..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  Include all the OS specific header files.
-*
-****************************************************************************/
-
-#include <fcntl.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <time.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/vt.h>
-#include <linux/fs.h>
-#ifdef USE_OS_JOYSTICK
-#include <linux/joystick.h>
-#endif
-#include <termios.h>
-#include <signal.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-/* Internal global variables */
-
-extern int _PM_console_fd,_PM_leds,_PM_modifiers;
-
-/* Internal function prototypes */
-
-void _PM_restore_kb_mode(void);
-void _PM_keyboard_rawmode(void);
-
-/* Linux needs the generic joystick scaling code */
-
-#define NEED_SCALE_JOY_AXIS
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c b/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c
deleted file mode 100644
index c12a83500a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c
+++ /dev/null
@@ -1,1809 +0,0 @@
-;/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*                   Portions copyright (C) Josh Vanderhoof
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/mman.h>
-#include <sys/kd.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <sys/vt.h>
-#include <sys/wait.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <unistd.h>
-#include <termios.h>
-#include <fcntl.h>
-#include <syscall.h>
-#include <signal.h>
-#include <time.h>
-#include <ctype.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/types.h>
-#ifdef ENABLE_MTRR
-#include <asm/mtrr.h>
-#endif
-#include <asm/vm86.h>
-#ifdef __GLIBC__
-#include <sys/perm.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define REAL_MEM_BASE       ((void *)0x10000)
-#define REAL_MEM_SIZE       0x10000
-#define REAL_MEM_BLOCKS     0x100
-#define DEFAULT_VM86_FLAGS  (IF_MASK | IOPL_MASK)
-#define DEFAULT_STACK_SIZE  0x1000
-#define RETURN_TO_32_INT    255
-
-/* Quick and dirty fix for vm86() syscall from lrmi 0.6 */
-static int
-vm86(struct vm86_struct *vm)
-    {
-    int r;
-#ifdef __PIC__
-    asm volatile (
-     "pushl %%ebx\n\t"
-     "movl %2, %%ebx\n\t"
-     "int $0x80\n\t"
-     "popl %%ebx"
-     : "=a" (r)
-     : "0" (113), "r" (vm));
-#else
-    asm volatile (
-     "int $0x80"
-     : "=a" (r)
-     : "0" (113), "b" (vm));
-#endif
-    return r;
-    }
-
-
-static struct {
-    int                 ready;
-    unsigned short      ret_seg, ret_off;
-    unsigned short      stack_seg, stack_off;
-    struct vm86_struct  vm;
-    } context = {0};
-
-struct mem_block {
-    unsigned int size : 20;
-    unsigned int free : 1;
-    };
-
-static struct {
-    int ready;
-    int count;
-    struct mem_block blocks[REAL_MEM_BLOCKS];
-    } mem_info = {0};
-
-int                     _PM_console_fd = -1;
-int                     _PM_leds = 0,_PM_modifiers = 0;
-static ibool            inited = false;
-static int              tty_vc = 0;
-static int              console_count = 0;
-static int              startup_vc;
-static int              fd_mem = 0;
-static ibool            in_raw_mode = false;
-#ifdef ENABLE_MTRR
-static int              mtrr_fd;
-#endif
-static uint VESABuf_len = 1024;     /* Length of the VESABuf buffer     */
-static void *VESABuf_ptr = NULL;    /* Near pointer to VESABuf          */
-static uint VESABuf_rseg;           /* Real mode segment of VESABuf     */
-static uint VESABuf_roff;           /* Real mode offset of VESABuf      */
-#ifdef TRACE_IO
-static ulong            traceAddr;
-#endif
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef  TRACE_IO
-extern void printk(char *msg,...);
-#endif
-
-static inline void port_out(int value, int port)
-{
-#ifdef TRACE_IO
-    printk("%04X:%04X: outb.%04X <- %02X\n", traceAddr >> 16, traceAddr & 0xFFFF, (ushort)port, (uchar)value);
-#endif
-    asm volatile ("outb %0,%1"
-	  ::"a" ((unsigned char) value), "d"((unsigned short) port));
-}
-
-static inline void port_outw(int value, int port)
-{
-#ifdef TRACE_IO
-    printk("%04X:%04X: outw.%04X <- %04X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ushort)value);
-#endif
-    asm volatile ("outw %0,%1"
-	 ::"a" ((unsigned short) value), "d"((unsigned short) port));
-}
-
-static inline void port_outl(int value, int port)
-{
-#ifdef TRACE_IO
-    printk("%04X:%04X: outl.%04X <- %08X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ulong)value);
-#endif
-    asm volatile ("outl %0,%1"
-	 ::"a" ((unsigned long) value), "d"((unsigned short) port));
-}
-
-static inline unsigned int port_in(int port)
-{
-    unsigned char value;
-    asm volatile ("inb %1,%0"
-	      :"=a" ((unsigned char)value)
-	      :"d"((unsigned short) port));
-#ifdef TRACE_IO
-    printk("%04X:%04X:  inb.%04X -> %02X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (uchar)value);
-#endif
-    return value;
-}
-
-static inline unsigned int port_inw(int port)
-{
-    unsigned short value;
-    asm volatile ("inw %1,%0"
-	      :"=a" ((unsigned short)value)
-	      :"d"((unsigned short) port));
-#ifdef TRACE_IO
-    printk("%04X:%04X:  inw.%04X -> %04X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ushort)value);
-#endif
-    return value;
-}
-
-static inline unsigned int port_inl(int port)
-{
-    unsigned long value;
-    asm volatile ("inl %1,%0"
-	      :"=a" ((unsigned long)value)
-	      :"d"((unsigned short) port));
-#ifdef TRACE_IO
-    printk("%04X:%04X:  inl.%04X -> %08X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ulong)value);
-#endif
-    return value;
-}
-
-static int real_mem_init(void)
-{
-    void    *m;
-    int     fd_zero;
-
-    if (mem_info.ready)
-	return 1;
-
-    if ((fd_zero = open("/dev/zero", O_RDONLY)) == -1)
-	PM_fatalError("You must have root privledges to run this program!");
-    if ((m = mmap((void *)REAL_MEM_BASE, REAL_MEM_SIZE,
-	    PROT_READ | PROT_WRITE | PROT_EXEC,
-	    MAP_FIXED | MAP_PRIVATE, fd_zero, 0)) == (void *)-1) {
-	close(fd_zero);
-	PM_fatalError("You must have root privledges to run this program!");
-	}
-    mem_info.ready = 1;
-    mem_info.count = 1;
-    mem_info.blocks[0].size = REAL_MEM_SIZE;
-    mem_info.blocks[0].free = 1;
-    return 1;
-}
-
-static void insert_block(int i)
-{
-    memmove(
-	mem_info.blocks + i + 1,
-	mem_info.blocks + i,
-	(mem_info.count - i) * sizeof(struct mem_block));
-    mem_info.count++;
-}
-
-static void delete_block(int i)
-{
-    mem_info.count--;
-
-    memmove(
-	mem_info.blocks + i,
-	mem_info.blocks + i + 1,
-	(mem_info.count - i) * sizeof(struct mem_block));
-}
-
-static inline void set_bit(unsigned int bit, void *array)
-{
-    unsigned char *a = array;
-    a[bit / 8] |= (1 << (bit % 8));
-}
-
-static inline unsigned int get_int_seg(int i)
-{
-    return *(unsigned short *)(i * 4 + 2);
-}
-
-static inline unsigned int get_int_off(int i)
-{
-    return *(unsigned short *)(i * 4);
-}
-
-static inline void pushw(unsigned short i)
-{
-    struct vm86_regs *r = &context.vm.regs;
-    r->esp -= 2;
-    *(unsigned short *)(((unsigned int)r->ss << 4) + r->esp) = i;
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return true; }
-
-void PMAPI PM_init(void)
-{
-    void    *m;
-    uint    r_seg,r_off;
-
-    if (inited)
-	return;
-
-    /* Map the Interrupt Vectors (0x0 - 0x400) + BIOS data (0x400 - 0x502)
-     * and the physical framebuffer and ROM images from (0xa0000 - 0x100000)
-     */
-    real_mem_init();
-    if (!fd_mem && (fd_mem = open("/dev/mem", O_RDWR)) == -1) {
-	PM_fatalError("You must have root privileges to run this program!");
-	}
-    if ((m = mmap((void *)0, 0x502,
-	    PROT_READ | PROT_WRITE | PROT_EXEC,
-	    MAP_FIXED | MAP_PRIVATE, fd_mem, 0)) == (void *)-1) {
-	PM_fatalError("You must have root privileges to run this program!");
-	}
-    if ((m = mmap((void *)0xA0000, 0xC0000 - 0xA0000,
-	    PROT_READ | PROT_WRITE,
-	    MAP_FIXED | MAP_SHARED, fd_mem, 0xA0000)) == (void *)-1) {
-	PM_fatalError("You must have root privileges to run this program!");
-	}
-    if ((m = mmap((void *)0xC0000, 0xD0000 - 0xC0000,
-	    PROT_READ | PROT_WRITE | PROT_EXEC,
-	    MAP_FIXED | MAP_PRIVATE, fd_mem, 0xC0000)) == (void *)-1) {
-	PM_fatalError("You must have root privileges to run this program!");
-	}
-    if ((m = mmap((void *)0xD0000, 0x100000 - 0xD0000,
-	    PROT_READ | PROT_WRITE,
-	    MAP_FIXED | MAP_SHARED, fd_mem, 0xD0000)) == (void *)-1) {
-	PM_fatalError("You must have root privileges to run this program!");
-	}
-    inited = 1;
-
-    /* Allocate a stack */
-    m = PM_allocRealSeg(DEFAULT_STACK_SIZE,&r_seg,&r_off);
-    context.stack_seg = r_seg;
-    context.stack_off = r_off+DEFAULT_STACK_SIZE;
-
-    /* Allocate the return to 32 bit routine */
-    m = PM_allocRealSeg(2,&r_seg,&r_off);
-    context.ret_seg = r_seg;
-    context.ret_off = r_off;
-    ((uchar*)m)[0] = 0xCD;         /* int opcode */
-    ((uchar*)m)[1] = RETURN_TO_32_INT;
-    memset(&context.vm, 0, sizeof(context.vm));
-
-    /* Enable kernel emulation of all ints except RETURN_TO_32_INT */
-    memset(&context.vm.int_revectored, 0, sizeof(context.vm.int_revectored));
-    set_bit(RETURN_TO_32_INT, &context.vm.int_revectored);
-    context.ready = 1;
-#ifdef ENABLE_MTRR
-    mtrr_fd =  open("/dev/cpu/mtrr", O_RDWR, 0);
-    if (mtrr_fd < 0)
-       mtrr_fd =  open("/proc/mtrr", O_RDWR, 0);
-#endif
-    /* Enable I/O permissions to directly access I/O ports. We break the
-     * allocation into two parts, one for the ports from 0-0x3FF and
-     * another for the remaining ports up to 0xFFFF. Standard Linux kernels
-     * only allow the first 0x400 ports to be enabled, so to enable all
-     * 65536 ports you need a patched kernel that will enable the full
-     * 8Kb I/O permissions bitmap.
-     */
-#ifndef TRACE_IO
-    ioperm(0x0,0x400,1);
-    ioperm(0x400,0x10000-0x400,1);
-#endif
-    iopl(3);
-}
-
-long PMAPI PM_getOSType(void)
-{ return _OS_LINUX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '/') {
-	s[pos] = '/';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    fprintf(stderr,"%s\n", msg);
-    fflush(stderr);
-    exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
-    if (VESABuf_ptr)
-	PM_freeRealSeg(VESABuf_ptr);
-    VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	atexit(ExitVBEBuf);
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-/* New raw console based getch and kbhit functions */
-
-#define KB_CAPS     LED_CAP /* 4 */
-#define KB_NUMLOCK  LED_NUM /* 2 */
-#define KB_SCROLL   LED_SCR /* 1 */
-#define KB_SHIFT    8
-#define KB_CONTROL  16
-#define KB_ALT      32
-
-/* Structure used to save the keyboard mode to disk. We save it to disk
- * so that we can properly restore the mode later if the program crashed.
- */
-
-typedef struct {
-    struct termios  termios;
-    int             kb_mode;
-    int             leds;
-    int             flags;
-    int             startup_vc;
-    } keyboard_mode;
-
-/* Name of the file used to save keyboard mode information */
-
-#define KBMODE_DAT  "kbmode.dat"
-
-/****************************************************************************
-REMARKS:
-Open the keyboard mode file on disk.
-****************************************************************************/
-static FILE *open_kb_mode(
-    char *mode,
-    char *path)
-{
-    if (!PM_findBPD("graphics.bpd",path))
-	return NULL;
-    PM_backslash(path);
-    strcat(path,KBMODE_DAT);
-    return fopen(path,mode);
-}
-
-/****************************************************************************
-REMARKS:
-Restore the keyboard to normal mode
-****************************************************************************/
-void _PM_restore_kb_mode(void)
-{
-    FILE            *kbmode;
-    keyboard_mode   mode;
-    char            path[PM_MAX_PATH];
-
-    if (_PM_console_fd != -1 && (kbmode = open_kb_mode("rb",path)) != NULL) {
-	if (fread(&mode,1,sizeof(mode),kbmode) == sizeof(mode)) {
-	    if (mode.startup_vc > 0)
-		ioctl(_PM_console_fd, VT_ACTIVATE, mode.startup_vc);
-	    ioctl(_PM_console_fd, KDSKBMODE, mode.kb_mode);
-	    ioctl(_PM_console_fd, KDSETLED, mode.leds);
-	    tcsetattr(_PM_console_fd, TCSAFLUSH, &mode.termios);
-	    fcntl(_PM_console_fd,F_SETFL,mode.flags);
-	    }
-	fclose(kbmode);
-	unlink(path);
-	in_raw_mode = false;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _PM_abort(
-    int signo)
-{
-    char    buf[80];
-
-    sprintf(buf,"Terminating on signal %d",signo);
-    _PM_restore_kb_mode();
-    PM_fatalError(buf);
-}
-
-/****************************************************************************
-REMARKS:
-Put the keyboard into raw mode
-****************************************************************************/
-void _PM_keyboard_rawmode(void)
-{
-    struct termios conf;
-    FILE            *kbmode;
-    keyboard_mode   mode;
-    char            path[PM_MAX_PATH];
-    int             i;
-    static int sig_list[] = {
-	SIGHUP,
-	SIGINT,
-	SIGQUIT,
-	SIGILL,
-	SIGTRAP,
-	SIGABRT,
-	SIGIOT,
-	SIGBUS,
-	SIGFPE,
-	SIGKILL,
-	SIGSEGV,
-	SIGTERM,
-	};
-
-    if ((kbmode = open_kb_mode("rb",path)) == NULL) {
-	if ((kbmode = open_kb_mode("wb",path)) == NULL)
-	    PM_fatalError("Unable to open kbmode.dat file for writing!");
-	if (ioctl(_PM_console_fd, KDGKBMODE, &mode.kb_mode))
-	    perror("KDGKBMODE");
-	ioctl(_PM_console_fd, KDGETLED, &mode.leds);
-	_PM_leds = mode.leds & 0xF;
-	_PM_modifiers = 0;
-	tcgetattr(_PM_console_fd, &mode.termios);
-	conf = mode.termios;
-	conf.c_lflag &= ~(ICANON | ECHO | ISIG);
-	conf.c_iflag &= ~(ISTRIP | IGNCR | ICRNL | INLCR | BRKINT | PARMRK | INPCK | IUCLC | IXON | IXOFF);
-	conf.c_iflag  |= (IGNBRK | IGNPAR);
-	conf.c_cc[VMIN] = 1;
-	conf.c_cc[VTIME] = 0;
-	conf.c_cc[VSUSP] = 0;
-	tcsetattr(_PM_console_fd, TCSAFLUSH, &conf);
-	mode.flags = fcntl(_PM_console_fd,F_GETFL);
-	if (ioctl(_PM_console_fd, KDSKBMODE, K_MEDIUMRAW))
-	    perror("KDSKBMODE");
-	atexit(_PM_restore_kb_mode);
-	for (i = 0; i < sizeof(sig_list)/sizeof(sig_list[0]); i++)
-	    signal(sig_list[i], _PM_abort);
-	mode.startup_vc = startup_vc;
-	if (fwrite(&mode,1,sizeof(mode),kbmode) != sizeof(mode))
-	    PM_fatalError("Error writing kbmode.dat!");
-	fclose(kbmode);
-	in_raw_mode = true;
-	}
-}
-
-int PMAPI PM_kbhit(void)
-{
-    fd_set s;
-    struct timeval tv = { 0, 0 };
-
-    if (console_count == 0)
-	PM_fatalError("You *must* open a console before using PM_kbhit!");
-    if (!in_raw_mode)
-	_PM_keyboard_rawmode();
-    FD_ZERO(&s);
-    FD_SET(_PM_console_fd, &s);
-    return select(_PM_console_fd+1, &s, NULL, NULL, &tv) > 0;
-}
-
-int PMAPI PM_getch(void)
-{
-    static uchar    c;
-    int release;
-    static struct kbentry ke;
-
-    if (console_count == 0)
-	PM_fatalError("You *must* open a console before using PM_getch!");
-    if (!in_raw_mode)
-	_PM_keyboard_rawmode();
-    while (read(_PM_console_fd, &c, 1) > 0) {
-	release = c & 0x80;
-	c &= 0x7F;
-	if (release) {
-	    switch(c){
-		case 42: case 54: /* Shift */
-		    _PM_modifiers &= ~KB_SHIFT;
-		    break;
-		case 29: case 97: /* Control */
-		    _PM_modifiers &= ~KB_CONTROL;
-		    break;
-		case 56: case 100: /* Alt / AltGr */
-		    _PM_modifiers &= ~KB_ALT;
-		    break;
-		}
-	    continue;
-	    }
-	switch (c) {
-	    case 42: case 54: /* Shift */
-		_PM_modifiers |= KB_SHIFT;
-		 break;
-	    case 29: case 97: /* Control */
-		_PM_modifiers |= KB_CONTROL;
-		break;
-	    case 56: case 100: /* Alt / AltGr */
-		_PM_modifiers |= KB_ALT;
-		break;
-	    case 58: /* Caps Lock */
-		_PM_modifiers ^= KB_CAPS;
-		ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
-		break;
-	    case 69: /* Num Lock */
-		_PM_modifiers ^= KB_NUMLOCK;
-		ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
-		break;
-	    case 70: /* Scroll Lock */
-		_PM_modifiers ^= KB_SCROLL;
-		ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
-		break;
-	    case 28:
-		return 0x1C;
-	    default:
-		ke.kb_index = c;
-		ke.kb_table = 0;
-		if ((_PM_modifiers & KB_SHIFT) || (_PM_modifiers & KB_CAPS))
-		    ke.kb_table |= K_SHIFTTAB;
-		if (_PM_modifiers & KB_ALT)
-		    ke.kb_table |= K_ALTTAB;
-		ioctl(_PM_console_fd, KDGKBENT, (ulong)&ke);
-		c = ke.kb_value & 0xFF;
-		return c;
-	    }
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Sleep until the virtual terminal is active
-****************************************************************************/
-static void wait_vt_active(
-    int _PM_console_fd)
-{
-    while (ioctl(_PM_console_fd, VT_WAITACTIVE, tty_vc) < 0) {
-	if ((errno != EAGAIN) && (errno != EINTR)) {
-	    perror("ioctl(VT_WAITACTIVE)");
-	    exit(1);
-	    }
-	usleep(150000);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Checks the owner of the specified virtual console.
-****************************************************************************/
-static int check_owner(
-    int vc)
-{
-    struct stat sbuf;
-    char fname[30];
-
-    sprintf(fname, "/dev/tty%d", vc);
-    if ((stat(fname, &sbuf) >= 0) && (getuid() == sbuf.st_uid))
-	return 1;
-    printf("You must be the owner of the current console to use this program.\n");
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Checks if the console is currently in graphics mode, and if so we forcibly
-restore it back to text mode again. This handles the case when a Nucleus or
-MGL program crashes and leaves the console in graphics mode. Running the
-textmode utility (or any other Nucleus/MGL program) via a telnet session
-into the machine will restore it back to normal.
-****************************************************************************/
-static void restore_text_console(
-    int console_id)
-{
-    if (ioctl(console_id, KDSETMODE, KD_TEXT) < 0)
-	LOGWARN("ioctl(KDSETMODE) failed");
-    _PM_restore_kb_mode();
-}
-
-/****************************************************************************
-REMARKS:
-Opens up the console device for output by finding an appropriate virutal
-console that we can run on.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hwndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-    struct vt_mode  vtm;
-    struct vt_stat  vts;
-    struct stat     sbuf;
-    char            fname[30];
-
-    /* Check if we have already opened the console */
-    if (console_count++)
-	return _PM_console_fd;
-
-    /* Now, it would be great if we could use /dev/tty and see what it is
-     * connected to. Alas, we cannot find out reliably what VC /dev/tty is
-     * bound to. Thus we parse stdin through stderr for a reliable VC.
-     */
-    startup_vc = 0;
-    for (_PM_console_fd = 0; _PM_console_fd < 3; _PM_console_fd++) {
-	if (fstat(_PM_console_fd, &sbuf) < 0)
-	    continue;
-	if (ioctl(_PM_console_fd, VT_GETMODE, &vtm) < 0)
-	    continue;
-	if ((sbuf.st_rdev & 0xFF00) != 0x400)
-	    continue;
-	if (!(sbuf.st_rdev & 0xFF))
-	    continue;
-	tty_vc = sbuf.st_rdev & 0xFF;
-	restore_text_console(_PM_console_fd);
-	return _PM_console_fd;
-	}
-    if ((_PM_console_fd = open("/dev/console", O_RDWR)) < 0) {
-	printf("open_dev_console: can't open /dev/console \n");
-	exit(1);
-	}
-    if (ioctl(_PM_console_fd, VT_OPENQRY, &tty_vc) < 0)
-	goto Error;
-    if (tty_vc <= 0)
-	goto Error;
-    sprintf(fname, "/dev/tty%d", tty_vc);
-    close(_PM_console_fd);
-
-    /* Change our control terminal */
-    setsid();
-
-    /* We must use RDWR to allow for output... */
-    if (((_PM_console_fd = open(fname, O_RDWR)) >= 0) &&
-	    (ioctl(_PM_console_fd, VT_GETSTATE, &vts) >= 0)) {
-	if (!check_owner(vts.v_active))
-	    goto Error;
-	restore_text_console(_PM_console_fd);
-
-	/* Success, redirect all stdios */
-	fflush(stdin);
-	fflush(stdout);
-	fflush(stderr);
-	close(0);
-	close(1);
-	close(2);
-	dup(_PM_console_fd);
-	dup(_PM_console_fd);
-	dup(_PM_console_fd);
-
-	/* clear screen and switch to it */
-	fwrite("\e[H\e[J", 6, 1, stderr);
-	fflush(stderr);
-	if (tty_vc != vts.v_active) {
-	    startup_vc = vts.v_active;
-	    ioctl(_PM_console_fd, VT_ACTIVATE, tty_vc);
-	    wait_vt_active(_PM_console_fd);
-	    }
-	}
-    return _PM_console_fd;
-
-Error:
-    if (_PM_console_fd > 2)
-	close(_PM_console_fd);
-    console_count = 0;
-    PM_fatalError(
-	"Not running in a graphics capable console,\n"
-	"and unable to find one.\n");
-    return -1;
-}
-
-#define FONT_C  0x10000     /* 64KB for font data                       */
-
-/****************************************************************************
-REMARKS:
-Returns the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
-    if (!inited)
-	PM_init();
-    return PM_getVGAStateSize() + FONT_C*2;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the Linux console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
-    uchar   *regs = stateBuf;
-
-    /* Save the current console font */
-    if (ioctl(console_id,GIO_FONT,&regs[PM_getVGAStateSize()]) < 0)
-	perror("ioctl(GIO_FONT)");
-
-    /* Inform the Linux console that we are going into graphics mode */
-    if (ioctl(console_id, KDSETMODE, KD_GRAPHICS) < 0)
-	perror("ioctl(KDSETMODE)");
-
-    /* Save state of VGA registers */
-    PM_saveVGAState(stateBuf);
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
-    /* TODO: Implement support for allowing console switching! */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the state of the Linux console.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND console_id)
-{
-    const uchar *regs = stateBuf;
-
-    /* Restore the state of the VGA compatible registers */
-    PM_restoreVGAState(stateBuf);
-
-    /* Inform the Linux console that we are back from graphics modes */
-    if (ioctl(console_id, KDSETMODE, KD_TEXT) < 0)
-	LOGWARN("ioctl(KDSETMODE) failed");
-
-    /* Restore the old console font */
-    if (ioctl(console_id,PIO_FONT,&regs[PM_getVGAStateSize()]) < 0)
-	LOGWARN("ioctl(KDSETMODE) failed");
-
-    /* Coming back from graphics mode on Linux also restored the previous
-     * text mode console contents, so we need to clear the screen to get
-     * around this since the cursor does not get homed by our code.
-     */
-    fflush(stdout);
-    fflush(stderr);
-    printf("\033[H\033[J");
-    fflush(stdout);
-}
-
-/****************************************************************************
-REMARKS:
-Close the Linux console and put it back to normal.
-****************************************************************************/
-void PMAPI PM_closeConsole(PM_HWND _PM_console_fd)
-{
-    /* Restore console to normal operation */
-    if (--console_count == 0) {
-	/* Re-activate the original virtual console */
-	if (startup_vc > 0)
-	    ioctl(_PM_console_fd, VT_ACTIVATE, startup_vc);
-
-	/* Close the console file descriptor */
-	if (_PM_console_fd > 2)
-	    close(_PM_console_fd);
-	_PM_console_fd = -1;
-	}
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
-    /* Nothing to do in here */
-}
-
-/****************************************************************************
-REMARKS:
-Set the screen width and height for the Linux console.
-****************************************************************************/
-void PM_setOSScreenWidth(int width,int height)
-{
-    struct winsize  ws;
-    struct vt_sizes vs;
-
-    /* Resize the software terminal */
-    ws.ws_col = width;
-    ws.ws_row = height;
-    ioctl(_PM_console_fd, TIOCSWINSZ, &ws);
-
-    /* And the hardware */
-    vs.v_rows = height;
-    vs.v_cols = width;
-    vs.v_scrollsize = 0;
-    ioctl(_PM_console_fd, VT_RESIZE, &vs);
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
-    /* TODO: Implement this for Linux */
-    return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
-    /* TODO: Implement this for Linux */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* TODO: Implement this for Linux */
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    char *env = getenv("NUCLEUS_PATH");
-    return env ? env : "/usr/lib/nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    static uchar *zeroPtr = NULL;
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
-    return (void*)(zeroPtr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    /* PM_init maps in the 0xA0000 framebuffer region 1:1 with our
-     * address mapping, so we can return the address here.
-     */
-    if (!inited)
-	PM_init();
-    return (void*)(0xA0000);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    uchar   *p;
-    ulong   baseAddr,baseOfs;
-
-    if (!inited)
-	PM_init();
-    if (base >= 0xA0000 && base < 0x100000)
-	return (void*)base;
-    if (!fd_mem && (fd_mem = open("/dev/mem", O_RDWR)) == -1)
-	return NULL;
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to mmap. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    baseOfs = base & 4095;
-    baseAddr = base & ~4095;
-    limit = ((limit+baseOfs+1+4095) & ~4095)-1;
-    if ((p = mmap(0, limit+1,
-	    PROT_READ | PROT_WRITE, MAP_SHARED,
-	    fd_mem, baseAddr)) == (void *)-1)
-	return NULL;
-    return (void*)(p+baseOfs);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    if ((ulong)ptr >= 0x100000)
-	munmap(ptr,limit+1);
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{
-    /* TODO: This function should find a range of physical addresses */
-    /*       for a linear address. */
-    return false;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
-    return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
-    PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    /* PM_init maps in the 0xA0000-0x100000 region 1:1 with our
-     * address mapping, as well as all memory blocks in a 1:1 address
-     * mapping so we can simply return the physical address in here.
-     */
-    if (!inited)
-	PM_init();
-    return (void*)MK_PHYS(r_seg,r_off);
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    int     i;
-    char    *r = (char *)REAL_MEM_BASE;
-
-    if (!inited)
-	PM_init();
-    if (!mem_info.ready)
-	return NULL;
-    if (mem_info.count == REAL_MEM_BLOCKS)
-	return NULL;
-    size = (size + 15) & ~15;
-    for (i = 0; i < mem_info.count; i++) {
-	if (mem_info.blocks[i].free && size < mem_info.blocks[i].size) {
-	    insert_block(i);
-	    mem_info.blocks[i].size = size;
-	    mem_info.blocks[i].free = 0;
-	    mem_info.blocks[i + 1].size -= size;
-	    *r_seg = (uint)(r) >> 4;
-	    *r_off = (uint)(r) & 0xF;
-	    return (void *)r;
-	    }
-	r += mem_info.blocks[i].size;
-	}
-    return NULL;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    int     i;
-    char    *r = (char *)REAL_MEM_BASE;
-
-    if (!mem_info.ready)
-	return;
-    i = 0;
-    while (mem != (void *)r) {
-	r += mem_info.blocks[i].size;
-	i++;
-	if (i == mem_info.count)
-	    return;
-	}
-    mem_info.blocks[i].free = 1;
-    if (i + 1 < mem_info.count && mem_info.blocks[i + 1].free) {
-	mem_info.blocks[i].size += mem_info.blocks[i + 1].size;
-	delete_block(i + 1);
-	}
-    if (i - 1 >= 0 && mem_info.blocks[i - 1].free) {
-	mem_info.blocks[i - 1].size += mem_info.blocks[i].size;
-	delete_block(i);
-	}
-}
-
-#define DIRECTION_FLAG  (1 << 10)
-
-static void em_ins(int size)
-{
-    unsigned int edx, edi;
-
-    edx = context.vm.regs.edx & 0xffff;
-    edi = context.vm.regs.edi & 0xffff;
-    edi += (unsigned int)context.vm.regs.ds << 4;
-    if (context.vm.regs.eflags & DIRECTION_FLAG) {
-	if (size == 4)
-	    asm volatile ("std; insl; cld"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	else if (size == 2)
-	    asm volatile ("std; insw; cld"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	else
-	    asm volatile ("std; insb; cld"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	}
-    else {
-	if (size == 4)
-	    asm volatile ("cld; insl"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	else if (size == 2)
-	    asm volatile ("cld; insw"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	else
-	    asm volatile ("cld; insb"
-	     : "=D" (edi) : "d" (edx), "0" (edi));
-	}
-    edi -= (unsigned int)context.vm.regs.ds << 4;
-    context.vm.regs.edi &= 0xffff0000;
-    context.vm.regs.edi |= edi & 0xffff;
-}
-
-static void em_rep_ins(int size)
-{
-    unsigned int ecx, edx, edi;
-
-    ecx = context.vm.regs.ecx & 0xffff;
-    edx = context.vm.regs.edx & 0xffff;
-    edi = context.vm.regs.edi & 0xffff;
-    edi += (unsigned int)context.vm.regs.ds << 4;
-    if (context.vm.regs.eflags & DIRECTION_FLAG) {
-	if (size == 4)
-	    asm volatile ("std; rep; insl; cld"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	else if (size == 2)
-	    asm volatile ("std; rep; insw; cld"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	else
-	    asm volatile ("std; rep; insb; cld"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	}
-    else {
-	if (size == 4)
-	    asm volatile ("cld; rep; insl"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	else if (size == 2)
-	    asm volatile ("cld; rep; insw"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	else
-	    asm volatile ("cld; rep; insb"
-	     : "=D" (edi), "=c" (ecx)
-	     : "d" (edx), "0" (edi), "1" (ecx));
-	}
-
-    edi -= (unsigned int)context.vm.regs.ds << 4;
-    context.vm.regs.edi &= 0xffff0000;
-    context.vm.regs.edi |= edi & 0xffff;
-    context.vm.regs.ecx &= 0xffff0000;
-    context.vm.regs.ecx |= ecx & 0xffff;
-}
-
-static void em_outs(int size)
-{
-    unsigned int edx, esi;
-
-    edx = context.vm.regs.edx & 0xffff;
-    esi = context.vm.regs.esi & 0xffff;
-    esi += (unsigned int)context.vm.regs.ds << 4;
-    if (context.vm.regs.eflags & DIRECTION_FLAG) {
-	if (size == 4)
-	    asm volatile ("std; outsl; cld"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	else if (size == 2)
-	    asm volatile ("std; outsw; cld"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	else
-	    asm volatile ("std; outsb; cld"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	}
-    else {
-	if (size == 4)
-	    asm volatile ("cld; outsl"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	else if (size == 2)
-	    asm volatile ("cld; outsw"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	else
-	    asm volatile ("cld; outsb"
-	     : "=S" (esi) : "d" (edx), "0" (esi));
-	}
-
-    esi -= (unsigned int)context.vm.regs.ds << 4;
-    context.vm.regs.esi &= 0xffff0000;
-    context.vm.regs.esi |= esi & 0xffff;
-}
-
-static void em_rep_outs(int size)
-{
-    unsigned int ecx, edx, esi;
-
-    ecx = context.vm.regs.ecx & 0xffff;
-    edx = context.vm.regs.edx & 0xffff;
-    esi = context.vm.regs.esi & 0xffff;
-    esi += (unsigned int)context.vm.regs.ds << 4;
-    if (context.vm.regs.eflags & DIRECTION_FLAG) {
-	if (size == 4)
-	    asm volatile ("std; rep; outsl; cld"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	else if (size == 2)
-	    asm volatile ("std; rep; outsw; cld"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	else
-	    asm volatile ("std; rep; outsb; cld"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	}
-    else {
-	if (size == 4)
-	    asm volatile ("cld; rep; outsl"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	else if (size == 2)
-	    asm volatile ("cld; rep; outsw"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	else
-	    asm volatile ("cld; rep; outsb"
-	     : "=S" (esi), "=c" (ecx)
-	     : "d" (edx), "0" (esi), "1" (ecx));
-	}
-
-    esi -= (unsigned int)context.vm.regs.ds << 4;
-    context.vm.regs.esi &= 0xffff0000;
-    context.vm.regs.esi |= esi & 0xffff;
-    context.vm.regs.ecx &= 0xffff0000;
-    context.vm.regs.ecx |= ecx & 0xffff;
-}
-
-static int emulate(void)
-{
-    unsigned char *insn;
-    struct {
-	unsigned int size : 1;
-	unsigned int rep : 1;
-	} prefix = { 0, 0 };
-    int i = 0;
-
-    insn = (unsigned char *)((unsigned int)context.vm.regs.cs << 4);
-    insn += context.vm.regs.eip;
-
-    while (1) {
-#ifdef TRACE_IO
-	traceAddr = ((ulong)context.vm.regs.cs << 16) + context.vm.regs.eip + i;
-#endif
-	if (insn[i] == 0x66) {
-	    prefix.size = 1 - prefix.size;
-	    i++;
-	    }
-	else if (insn[i] == 0xf3) {
-	    prefix.rep = 1;
-	    i++;
-	    }
-	else if (insn[i] == 0xf0 || insn[i] == 0xf2
-	     || insn[i] == 0x26 || insn[i] == 0x2e
-	     || insn[i] == 0x36 || insn[i] == 0x3e
-	     || insn[i] == 0x64 || insn[i] == 0x65
-	     || insn[i] == 0x67) {
-	    /* these prefixes are just ignored */
-	    i++;
-	    }
-	else if (insn[i] == 0x6c) {
-	    if (prefix.rep)
-		em_rep_ins(1);
-	    else
-		em_ins(1);
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0x6d) {
-	    if (prefix.rep) {
-		if (prefix.size)
-		    em_rep_ins(4);
-		else
-		    em_rep_ins(2);
-		}
-	    else {
-		if (prefix.size)
-		    em_ins(4);
-		else
-		    em_ins(2);
-		}
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0x6e) {
-	    if (prefix.rep)
-		em_rep_outs(1);
-	    else
-		em_outs(1);
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0x6f) {
-	    if (prefix.rep) {
-		if (prefix.size)
-		    em_rep_outs(4);
-		else
-		    em_rep_outs(2);
-		}
-	    else {
-		if (prefix.size)
-		    em_outs(4);
-		else
-		    em_outs(2);
-		}
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0xec) {
-	    *((uchar*)&context.vm.regs.eax) = port_in(context.vm.regs.edx);
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0xed) {
-	    if (prefix.size)
-		*((ulong*)&context.vm.regs.eax) = port_inl(context.vm.regs.edx);
-	    else
-		*((ushort*)&context.vm.regs.eax) = port_inw(context.vm.regs.edx);
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0xee) {
-	    port_out(context.vm.regs.eax,context.vm.regs.edx);
-	    i++;
-	    break;
-	    }
-	else if (insn[i] == 0xef) {
-	    if (prefix.size)
-		port_outl(context.vm.regs.eax,context.vm.regs.edx);
-	    else
-		port_outw(context.vm.regs.eax,context.vm.regs.edx);
-	    i++;
-	    break;
-	    }
-	else
-	    return 0;
-	}
-
-    context.vm.regs.eip += i;
-    return 1;
-}
-
-static void debug_info(int vret)
-{
-    int i;
-    unsigned char *p;
-
-    fputs("vm86() failed\n", stderr);
-    fprintf(stderr, "return = 0x%x\n", vret);
-    fprintf(stderr, "eax = 0x%08lx\n", context.vm.regs.eax);
-    fprintf(stderr, "ebx = 0x%08lx\n", context.vm.regs.ebx);
-    fprintf(stderr, "ecx = 0x%08lx\n", context.vm.regs.ecx);
-    fprintf(stderr, "edx = 0x%08lx\n", context.vm.regs.edx);
-    fprintf(stderr, "esi = 0x%08lx\n", context.vm.regs.esi);
-    fprintf(stderr, "edi = 0x%08lx\n", context.vm.regs.edi);
-    fprintf(stderr, "ebp = 0x%08lx\n", context.vm.regs.ebp);
-    fprintf(stderr, "eip = 0x%08lx\n", context.vm.regs.eip);
-    fprintf(stderr, "cs  = 0x%04x\n", context.vm.regs.cs);
-    fprintf(stderr, "esp = 0x%08lx\n", context.vm.regs.esp);
-    fprintf(stderr, "ss  = 0x%04x\n", context.vm.regs.ss);
-    fprintf(stderr, "ds  = 0x%04x\n", context.vm.regs.ds);
-    fprintf(stderr, "es  = 0x%04x\n", context.vm.regs.es);
-    fprintf(stderr, "fs  = 0x%04x\n", context.vm.regs.fs);
-    fprintf(stderr, "gs  = 0x%04x\n", context.vm.regs.gs);
-    fprintf(stderr, "eflags  = 0x%08lx\n", context.vm.regs.eflags);
-    fputs("cs:ip = [ ", stderr);
-    p = (unsigned char *)((context.vm.regs.cs << 4) + (context.vm.regs.eip & 0xffff));
-    for (i = 0; i < 16; ++i)
-	    fprintf(stderr, "%02x ", (unsigned int)p[i]);
-    fputs("]\n", stderr);
-    fflush(stderr);
-}
-
-static int run_vm86(void)
-{
-    unsigned int vret;
-
-    for (;;) {
-	vret = vm86(&context.vm);
-	if (VM86_TYPE(vret) == VM86_INTx) {
-	    unsigned int v = VM86_ARG(vret);
-	    if (v == RETURN_TO_32_INT)
-		return 1;
-	    pushw(context.vm.regs.eflags);
-	    pushw(context.vm.regs.cs);
-	    pushw(context.vm.regs.eip);
-	    context.vm.regs.cs = get_int_seg(v);
-	    context.vm.regs.eip = get_int_off(v);
-	    context.vm.regs.eflags &= ~(VIF_MASK | TF_MASK);
-	    continue;
-	    }
-	if (VM86_TYPE(vret) != VM86_UNKNOWN)
-	    break;
-	if (!emulate())
-	    break;
-	}
-    debug_info(vret);
-    return 0;
-}
-
-#define IND(ereg) context.vm.regs.ereg = regs->ereg
-#define OUTD(ereg) regs->ereg = context.vm.regs.ereg
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    IND(eax); IND(ebx); IND(ecx); IND(edx); IND(esi); IND(edi);
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(intno);
-    context.vm.regs.eip = get_int_off(intno);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-    OUTD(eax); OUTD(ebx); OUTD(ecx); OUTD(edx); OUTD(esi); OUTD(edi);
-    regs->flags = context.vm.regs.eflags;
-}
-
-#define IN(ereg) context.vm.regs.ereg = in->e.ereg
-#define OUT(ereg) out->e.ereg = context.vm.regs.ereg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(intno);
-    context.vm.regs.eip = get_int_off(intno);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    out->x.cflag = context.vm.regs.eflags & 1;
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    if (!inited)
-	PM_init();
-    if (intno == 0x21) {
-	time_t today = time(NULL);
-	struct tm *t;
-	t = localtime(&today);
-	out->x.cx = t->tm_year + 1900;
-	out->h.dh = t->tm_mon + 1;
-	out->h.dl = t->tm_mday;
-	}
-    else {
-	unsigned int seg, off;
-	seg = get_int_seg(intno);
-	off = get_int_off(intno);
-	memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-	IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-	context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-	context.vm.regs.cs = seg;
-	context.vm.regs.eip = off;
-	context.vm.regs.es = sregs->es;
-	context.vm.regs.ds = sregs->ds;
-	context.vm.regs.fs = sregs->fs;
-	context.vm.regs.gs = sregs->gs;
-	context.vm.regs.ss = context.stack_seg;
-	context.vm.regs.esp = context.stack_off;
-	pushw(DEFAULT_VM86_FLAGS);
-	pushw(context.ret_seg);
-	pushw(context.ret_off);
-	run_vm86();
-	OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-	sregs->es = context.vm.regs.es;
-	sregs->ds = context.vm.regs.ds;
-	sregs->fs = context.vm.regs.fs;
-	sregs->gs = context.vm.regs.gs;
-	out->x.cflag = context.vm.regs.eflags & 1;
-	}
-    return out->e.eax;
-}
-
-#define OUTR(ereg) in->e.ereg = context.vm.regs.ereg
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
-    RMSREGS *sregs)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = seg;
-    context.vm.regs.eip = off;
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    context.vm.regs.es = sregs->es;
-    context.vm.regs.ds = sregs->ds;
-    context.vm.regs.fs = sregs->fs;
-    context.vm.regs.gs = sregs->gs;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-    OUTR(eax); OUTR(ebx); OUTR(ecx); OUTR(edx); OUTR(esi); OUTR(edi);
-    sregs->es = context.vm.regs.es;
-    sregs->ds = context.vm.regs.ds;
-    sregs->fs = context.vm.regs.fs;
-    sregs->gs = context.vm.regs.gs;
-    in->x.cflag = context.vm.regs.eflags & 1;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    FILE    *mem = fopen("/proc/meminfo","r");
-    char    buf[1024];
-
-    fgets(buf,1024,mem);
-    fgets(buf,1024,mem);
-    sscanf(buf,"Mem: %*d %*d %ld", physical);
-    fgets(buf,1024,mem);
-    sscanf(buf,"Swap: %*d %*d %ld", total);
-    fclose(mem);
-    *total += *physical;
-}
-
-void * PMAPI PM_allocLockedMem(uint size,ulong *physAddr,ibool contiguous,ibool below16M)
-{
-    /* TODO: Implement this for Linux */
-    return NULL;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
-    /* TODO: Implement this for Linux */
-}
-
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    /* TODO: Implement this for Linux */
-    return NULL;
-}
-
-void PMAPI PM_freePage(
-    void *p)
-{
-    /* TODO: Implement this for Linux */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    context.vm.regs.eax = 0x4F05;
-    context.vm.regs.ebx = 0x0000;
-    context.vm.regs.edx = bank;
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(0x10);
-    context.vm.regs.eip = get_int_off(0x10);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    context.vm.regs.eax = 0x4F05;
-    context.vm.regs.ebx = 0x0000;
-    context.vm.regs.edx = bank;
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(0x10);
-    context.vm.regs.eip = get_int_off(0x10);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-    context.vm.regs.eax = 0x4F05;
-    context.vm.regs.ebx = 0x0001;
-    context.vm.regs.edx = bank;
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(0x10);
-    context.vm.regs.eip = get_int_off(0x10);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
-    if (!inited)
-	PM_init();
-    memset(&context.vm.regs, 0, sizeof(context.vm.regs));
-    context.vm.regs.eax = 0x4F07;
-    context.vm.regs.ebx = waitVRT;
-    context.vm.regs.ecx = x;
-    context.vm.regs.edx = y;
-    context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
-    context.vm.regs.cs = get_int_seg(0x10);
-    context.vm.regs.eip = get_int_off(0x10);
-    context.vm.regs.ss = context.stack_seg;
-    context.vm.regs.esp = context.stack_off;
-    pushw(DEFAULT_VM86_FLAGS);
-    pushw(context.ret_seg);
-    pushw(context.ret_off);
-    run_vm86();
-}
-
-int PMAPI PM_enableWriteCombine(ulong base,ulong length,uint type)
-{
-#ifdef ENABLE_MTRR
-    struct mtrr_sentry sentry;
-
-    if (mtrr_fd < 0)
-	return PM_MTRR_ERR_NO_OS_SUPPORT;
-    sentry.base = base;
-    sentry.size = length;
-    sentry.type = type;
-    if (ioctl(mtrr_fd, MTRRIOC_ADD_ENTRY, &sentry) == -1) {
-	/* TODO: Need to decode MTRR error codes!! */
-	return PM_MTRR_NOT_SUPPORTED;
-	}
-    return PM_MTRR_ERR_OK;
-#else
-    return PM_MTRR_ERR_NO_OS_SUPPORT;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-callback    - Function to callback with write combine information
-
-REMARKS:
-Function to enumerate all write combine regions currently enabled for the
-processor.
-****************************************************************************/
-int PMAPI PM_enumWriteCombine(
-    PM_enumWriteCombine_t callback)
-{
-#ifdef ENABLE_MTRR
-    struct mtrr_gentry gentry;
-
-    if (mtrr_fd < 0)
-	return PM_MTRR_ERR_NO_OS_SUPPORT;
-
-    for (gentry.regnum = 0; ioctl (mtrr_fd, MTRRIOC_GET_ENTRY, &gentry) == 0;
-	 ++gentry.regnum) {
-	if (gentry.size > 0) {
-	    /* WARNING: This code assumes that the types in pmapi.h match the ones */
-	    /* in the Linux kernel (mtrr.h) */
-	    callback(gentry.base, gentry.size, gentry.type);
-	}
-    }
-
-    return PM_MTRR_ERR_OK;
-#else
-    return PM_MTRR_ERR_NO_OS_SUPPORT;
-#endif
-}
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *copyOfBIOS,
-    ulong BIOSLen)
-{
-    char        *bios_ptr = (char*)0xC0000;
-    char        *old_bios;
-    ulong       Current10, Current6D, *rvec = 0;
-    RMREGS      regs;
-    RMSREGS     sregs;
-
-    /* The BIOS is mapped to 0xC0000 with a private memory mapping enabled
-     * which means we have a copy on write scheme. Hence we simply copy
-     * the secondary BIOS image over the top of the old one.
-     */
-    if (!inited)
-	PM_init();
-    if ((old_bios = PM_malloc(BIOSLen)) == NULL)
-	return false;
-    if (BIOSPhysAddr != 0xC0000) {
-	memcpy(old_bios,bios_ptr,BIOSLen);
-	memcpy(bios_ptr,copyOfBIOS,BIOSLen);
-	}
-
-    /* The interrupt vectors should already be mmap()'ed from 0-0x400 in PM_init */
-    Current10 = rvec[0x10];
-    Current6D = rvec[0x6D];
-
-    /* POST the secondary BIOS */
-    rvec[0x10] = rvec[0x42]; /* Restore int 10h to STD-BIOS */
-    regs.x.ax = axVal;
-    PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
-    /* Restore interrupt vectors */
-    rvec[0x10] = Current10;
-    rvec[0x6D] = Current6D;
-
-    /* Restore original BIOS image */
-    if (BIOSPhysAddr != 0xC0000)
-	memcpy(bios_ptr,old_bios,BIOSLen);
-    PM_free(old_bios);
-    return true;
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* TODO: Implement this to load shared libraries! */
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
-    int level)
-{
-    /* TODO: Move the IOPL switching into this function!! */
-    return level;
-}
-
-void PMAPI PM_flushTLB(void)
-{
-    /* Do nothing on Linux. */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c
deleted file mode 100644
index 1b9bae28a6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux
-*
-* Description:  Linux specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-#include <unistd.h>
-#include <sys/time.h>
-#include "pmapi.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Use the gettimeofday() function to get microsecond precision (probably less
-though)
-****************************************************************************/
-static inline ulong __ULZReadTime(void)
-{
-    struct timeval t;
-    gettimeofday(&t, NULL);
-    return t.tv_sec*1000000 + t.tv_usec;
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm)     tm->start.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-#define __LZTimerLap(tm)        (__ULZReadTime() - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)        tm->end.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm)  (tm->end.low - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/makefile b/board/MAI/bios_emulator/scitech/src/pm/makefile
deleted file mode 100644
index 265f0e36d0..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/makefile
+++ /dev/null
@@ -1,290 +0,0 @@
-#############################################################################
-#
-#                   Copyright (C) 1996 SciTech Software.
-#                           All rights reserved.
-#
-# Descripton:   Generic makefile for the PM library. Builds the library
-#               file and all test programs.
-#
-#############################################################################
-
-.IMPORT .IGNORE : DEBUG_AGP_DRIVER TEST_HARNESS DEBUG_SDDPMI
-
-#----------------------------------------------------------------------------
-# Add DOS extender dependant flags to command line
-#----------------------------------------------------------------------------
-
-CFLAGS          += $(DX_CFLAGS)
-ASFLAGS         += $(DX_ASFLAGS)
-NO_PMLIB        := 1
-
-#----------------------------------------------------------------------------
-# Include definitions specific for the target system
-#----------------------------------------------------------------------------
-
-.IF $(USE_VXD)
-
-# Building for Win32 VxD (minimal PM library implementation)
-
-LIBNAME         = pm
-OBJECTS         = pm$O vflat$O ztimer$O cpuinfo$O mtrr$O fileio$O pcilib$O \
-                  agp$O malloc$O vgastate$O gavxd$O _pm$O _mtrr$O _cpuinfo$O \
-                  _int64$O _pcihelp$O
-DEPEND_SRC      := vxd;common;codepage;tests
-.SOURCE:           vxd common codepage tests
-
-.ELIF $(USE_NTDRV)
-
-# Building for NT device drivers (minimal PM library implementation)
-
-LIBNAME         = pm
-OBJECTS         = pm$O vflat$O ztimer$O cpuinfo$O mtrr$O mem$O irq$O int86$O \
-                  stdio$O stdlib$O pcilib$O agp$O malloc$O vgastate$O gantdrv$O \
-                  _pm$O _mtrr$O _cpuinfo$O _int64$O _pcihelp$O _irq$O
-DEPEND_SRC      := ntdrv;common;codepage;tests
-.SOURCE:           ntdrv common codepage tests
-
-.ELIF $(USE_WIN32)
-
-# Building for Win32
-
-CFLAGS          += -DUSE_OS_JOYSTICK
-LIBNAME         = pm
-OBJECTS         = pm$O vflat$O event$O ddraw$O ztimer$O cpuinfo$O pcilib$O \
-                  agp$O malloc$O vgastate$O gawin32$O ntservc$O _joy$O _cpuinfo$O \
-                  _int64$O _pcihelp$O
-DEPEND_SRC      := win32;common;codepage;tests
-.SOURCE:           win32 common codepage tests
-
-.ELIF $(USE_OS232)
-
-# Building for OS/2
-
-.IF $(USE_OS2GUI)
-LIBNAME         = pm_pm
-.ELSE
-LIBNAME         = pm
-.ENDIF
-OBJECTS         = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
-                  agp$O malloc$O vgastate$O gaos2$O _pmos2$O _joy$O _cpuinfo$O \
-                  _int64$O _pcihelp$O dossctl$O
-DEPEND_SRC      := os2;common;codepage;tests
-.SOURCE:           os2 common codepage tests
-
-.ELIF $(USE_QNX)
-
-# Building for QNX
-
-USE_BIOS        := 1
-.IF $(USE_PHOTON)
-LIBNAME         = pm_ph
-.ELIF $(USE_X11)
-LIBNAME         = pm_x11
-.ELSE
-LIBNAME         = pm
-.ENDIF
-OBJECTS         = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
-                  agp$O malloc$O mtrrqnx$O unixio$O vgastate$O gaqnx$O _joy$O \
-                  _mtrrqnx$O _cpuinfo$O _int64$O _pcihelp$O
-DEPEND_SRC      := qnx;common;codepage;tests
-.SOURCE:           qnx common codepage tests
-
-# Indicate that this program uses Nucleus device drivers (so needs I/O access)
-USE_NUCLEUS     := 1
-
-.ELIF $(USE_LINUX)
-
-# Building for Linux
-
-CFLAGS          += -DENABLE_MTRR -DUSE_OS_JOYSTICK
-.IF $(USE_X11)
-LIBNAME         = pm_x11
-.ELSE
-LIBNAME         = pm
-.ENDIF
-OBJECTS         = pm$O vflat$O event$O ztimer$O cpuinfo$O pcilib$O \
-                  agp$O malloc$O unixio$O vgastate$O galinux$O _cpuinfo$O \
-                  _int64$O _pcihelp$O
-DEPEND_SRC      := linux;common;codepage;tests;x11
-.SOURCE:           linux common codepage tests x11
-
-# Building a shared library
-.IF $(SOFILE)
-LIB             := ld
-LIBFLAGS        := -r -o
-CFLAGS          += -fPIC
-.ENDIF
-
-.ELIF $(USE_BEOS)
-
-# Building for BeOS GUI
-
-LIBNAME         = pm
-OBJECTS         = pm$O vflat$O event$O ztimer$O cpuinfo$O pcilib$O \
-                  agp$O malloc$O vgastate$O gabeos$O _joy$O _cpuinfo$O \
-                  _int64$O _pcihelp$O
-DEPEND_SRC      := beos;common;codepage;tests
-.SOURCE:           beos common codepage tests
-
-.ELIF $(USE_SMX32)
-
-# Building for SMX
-
-LIBNAME         = pm
-OBJECTS         = pm$O pmsmx$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
-                  agp$O malloc$O vgastate$O gasmx$O _pm$O _pmsmx$O _mtrr$O _event$O \
-                  _joy$O _cpuinfo$O _int64$O _pcihelp$O _lztimer$O
-DEPEND_SRC      := smx;common;codepage;tests
-.SOURCE:           smx common codepage tests
-
-.ELIF $(USE_RTTARGET)
-
-# Building for RTTarget-32
-
-LIBNAME         = pm
-OBJECTS         = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
-                  agp$O malloc$O vgastate$O gartt$O _mtrr$O _joy$O _cpuinfo$O \
-                  _int64$O _pcihelp$O
-DEPEND_SRC      := rttarget;common;codepage;tests
-.SOURCE:           rttarget common codepage tests
-
-.ELSE
-
-# Building for MSDOS
-
-LIBNAME         = pm
-OBJECTS         = pm$O pmdos$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O \
-                  agp$O malloc$O pcilib$O vgastate$O gados$O \
-                  _pm$O _pmdos$O _mtrr$O _vflat$O _event$O _joy$O _pcihelp$O \
-                  _cpuinfo$O _int64$O _lztimer$O _dma$O
-DEPEND_SRC      := dos;common;codepage;tests
-.SOURCE:           dos common codepage tests
-
-.ENDIF
-
-# Object modules for keyboard code pages
-
-OBJECTS         += us_eng$O
-
-# Common object modules
-
-OBJECTS         += common$O
-.IF $(CHECKED)
-OBJECTS         += debug$O
-.ENDIF
-
-# Nucleus loader library object modules. Note that when compiling a test harness
-# library we need to exclude the Nucleus loader library.
-
-.IF $(TEST_HARNESS)
-CFLAGS          += -DTEST_HARNESS -DPMLIB
-LIBNAME         = pm_test
-.ELSE
-OBJECTS         += galib$O _ga_imp$O
-.ENDIF
-
-.IF $(DEBUG_SDDPMI)
-CFLAGS          += -DDEBUG_SDDPMI
-.ENDIF
-
-# AGP library object modules
-
-.IF $(DEBUG_AGP_DRIVER)
-CFLAGS          += -DDEBUG_AGP_DRIVER
-OBJECTS         += agplib$O
-.ELSE
-OBJECTS         += agplib$O peloader$O libcimp$O _gatimer$O
-.ENDIF
-
-#----------------------------------------------------------------------------
-# Name of library and generic object files required to build it
-#----------------------------------------------------------------------------
-
-.IF $(STKCALL)
-LIBFILE         = s$(LP)$(LIBNAME)$L
-.ELSE
-LIBFILE         = $(LP)$(LIBNAME)$L
-.ENDIF
-LIBCLEAN        = *.lib *.a
-
-#----------------------------------------------------------------------------
-# Change destination for library file depending the extender being used. This
-# is only necessary for DOS extender since the file go into a subdirectory
-# in the normal library directory, one for each supported extender. Other
-# OS'es put the file into the regular library directory, since there is
-# only one per OS in this case.
-#----------------------------------------------------------------------------
-
-MK_PMODE        = 1
-
-.IF $(TEST_HARNESS)
-LIB_DEST        := $(LIB_BASE)
-.ELIF $(USE_TNT)
-LIB_DEST        := $(LIB_BASE)\tnt
-.ELIF $(USE_DOS4GW)
-LIB_DEST        := $(LIB_BASE)\dos4gw
-.ELIF $(USE_X32)
-LIB_DEST        := $(LIB_BASE)\x32
-.ELIF $(USE_DPMI16)
-LIB_DEST        := $(LIB_BASE)\dpmi16
-.ELIF $(USE_DPMI32)
-LIB_DEST        := $(LIB_BASE)\dpmi32
-.ELIF $(USE_DOSX)
-LIB_DEST        := $(LIB_BASE)\dosx
-.END
-
-#----------------------------------------------------------------------------
-# Names of all executable files built
-#----------------------------------------------------------------------------
-
-.IF $(USE_REALDOS)
-EXEFILES        = memtest$E biosptr$E video$E isvesa$E callreal$E       \
-                  mouse$E tick$E key$E key15$E brk$E altbrk$E           \
-                  critical$E altcrit$E vftest$E rtc$E getch$E           \
-                  cpu$E timerc$E timercpp$E showpci$E uswc$E block$E
-.ELSE
-EXEFILES        = memtest$E video$E isvesa$E callreal$E vftest$E getch$E \
-                  cpu$E timerc$E timercpp$E showpci$E uswc$E block$E \
-                  save$E restore$E
-.ENDIF
-
-all: $(EXEFILES)
-
-$(EXEFILES): $(LIBFILE)
-
-memtest$E:  memtest$O
-biosptr$E:  biosptr$O
-video$E:    video$O
-isvesa$E:   isvesa$O
-mouse$E:    mouse$O
-tick$E:     tick$O
-key$E:      key$O
-key15$E:    key15$O
-brk$E:      brk$O
-altbrk$E:   altbrk$O
-critical$E: critical$O
-altcrit$E:  altcrit$O
-callreal$E: callreal$O
-vftest$E:   vftest$O
-rtc$E:      rtc$O
-getch$E:    getch$O
-cpu$E:      cpu$O
-timerc$E:   timerc$O
-timercpp$E: timercpp$O
-showpci$E:  showpci$O
-uswc$E:     uswc$O
-block$E:    block$O
-save$E:     save$O
-restore$E:  restore$O
-test$E:     test$O _test$O
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ      := $(OBJECTS) memtest$O biosptr$O video$O isvesa$O mouse$O  \
-                   tick$O key$O key$O brk$O altbrk$O critical$O altcrit$O   \
-                   callreal$O vftest$O getch$O timercpp$O
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm
deleted file mode 100644
index 11824a0afc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm
+++ /dev/null
@@ -1,288 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows NT device driver
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              Windows NT device drivers.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _irq                ; Set up memory model
-
-begdataseg  _irq
-
-    cextern _PM_rtcHandler,CPTR
-    cextern _PM_prevRTC,FCPTR
-
-RtcInside   dw      0           ; Are we still handling current interrupt
-sidtBuf     df      0           ; Buffer for sidt instruction
-
-enddataseg  _irq
-
-begcodeseg  _irq                ; Start of code segment
-
-cpublic _PM_irqCodeStart
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible, since a timer overrun will simply hang the
-;       system.
-;----------------------------------------------------------------------------
-cprocfar    _PM_rtcISR
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; If we enable interrupts and call into any C based interrupt handling code,
-; we need to setup a bunch of important information for the NT kernel. The
-; code below takes care of this housekeeping for us (see Undocumented NT for
-; details). If we don't do this housekeeping and interrupts are enabled,
-; the kernel will become very unstable and crash within 10 seconds or so.
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-        pushad
-        pushfd
-        push    fs
-
-        mov     ebx,00000030h
-        mov     fs,bx
-        sub     esp,50h
-        mov     ebp,esp
-
-; Setup the exception frame to NULL
-
-        mov     ebx,[DWORD cs:0FFDFF000h]
-        mov     [DWORD ds:0FFDFF000h], 0FFFFFFFFh
-        mov     [DWORD ebp],ebx
-
-; Save away the existing KSS ebp
-
-        mov     esi,[DWORD cs:0FFDFF124h]
-        mov     ebx,[DWORD esi+00000128h]
-        mov     [DWORD ebp+4h],ebx
-        mov     [DWORD esi+00000128h],ebp
-
-; Save away the kernel time and the thread mode (kernel/user)
-
-        mov     edi,[DWORD esi+00000137h]
-        mov     [DWORD ebp+8h],edi
-
-; Set the thread mode (kernel/user) based on the code selector
-
-        mov     ebx,[DWORD ebp+7Ch]
-        and     ebx,01
-        mov     [BYTE esi+00000137h],bl
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; End of special interrupt Prolog code
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
-        mov     al,20h
-        out     0A0h,al
-        out     020h,al
-
-; Clear real-time clock timeout
-
-        in      al,70h              ; Read CMOS index register
-        push    eax                 ;  and save for later
-        IODELAYN 3
-        mov     al,0Ch
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-
-; Call the C interrupt handler function
-
-        cmp     [BYTE RtcInside],1  ; Check for mutual exclusion
-        je      @@Exit
-        mov     [BYTE RtcInside],1
-        sti                         ; Enable interrupts
-        cld                         ; Clear direction flag for C code
-        call    [CPTR _PM_rtcHandler]
-        cli                         ; Disable interrupts on exit!
-        mov     [BYTE RtcInside],0
-
-@@Exit: pop     eax
-        out     70h,al              ; Restore CMOS index register
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; Start of special epilog code to restore stuff on exit from handler
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-; Restore the KSS ebp
-
-        mov     esi,[DWORD cs:0FFDFF124h]
-        mov     ebx,[DWORD ebp+4]
-        mov     [DWORD esi+00000128h],ebx
-
-; Restore the exception frame
-
-        mov     ebx,[DWORD ebp]
-        mov     [DWORD fs:00000000],ebx
-
-; Restore the thread mode
-
-        mov     ebx,[DWORD ebp+8h]
-        mov     esi,[DWORD fs:00000124h]
-        mov     [BYTE esi+00000137h],bl
-        add     esp, 50h
-        pop     fs
-        popfd
-        popad
-
-; Return from interrupt
-
-        iret
-
-cprocend
-
-cpublic _PM_irqCodeEnd
-
-;----------------------------------------------------------------------------
-; void _PM_getISR(int irq,PMFARPTR *handler);
-;----------------------------------------------------------------------------
-; Function to return the specific IRQ handler direct from the IDT.
-;----------------------------------------------------------------------------
-cprocstart  _PM_getISR
-
-        ARG     idtEntry:UINT, handler:DPTR
-
-        enter_c 0
-        mov     ecx,[handler]           ; Get address of handler to fill in
-        sidt    [sidtBuf]               ; Get IDTR register into sidtBuf
-        mov     eax,[DWORD sidtBuf+2]   ; Get address of IDT into EAX
-        mov     ebx,[idtEntry]
-        lea     eax,[eax+ebx*8]         ; Get entry in the IDT
-        movzx   edx,[WORD eax+6]        ; Get high order 16-bits
-        shl     edx,16                  ; Move into top 16-bits of address
-        mov     dx,[WORD eax]           ; Get low order 16-bits
-        mov     [DWORD ecx],edx         ; Store linear address of handler
-        mov     dx,[WORD eax+2]         ; Get selector value
-        mov     [WORD ecx+4],dx         ; Store selector value
-        leave_c
-        ret
-
-cprocend    _PM_getISR
-
-;----------------------------------------------------------------------------
-; void _PM_setISR(int irq,void *handler);
-;----------------------------------------------------------------------------
-; Function to set the specific IRQ handler direct in the IDT.
-;----------------------------------------------------------------------------
-cprocstart  _PM_setISR
-
-        ARG     irq:UINT, handler:CPTR
-
-        enter_c 0
-        mov     ecx,[handler]           ; Get address of new handler
-        mov     dx,cs                   ; Get selector for new handler
-        sidt    [sidtBuf]               ; Get IDTR register into sidtBuf
-        mov     eax,[DWORD sidtBuf+2]   ; Get address of IDT into EAX
-        mov     ebx,[idtEntry]
-        lea     eax,[eax+ebx*8]         ; Get entry in the IDT
-        cli
-        mov     [WORD eax+2],dx         ; Store code segment selector
-        mov     [WORD eax],cx           ; Store low order bits of handler
-        shr     ecx,16
-        mov     [WORD eax+6],cx         ; Store high order bits of handler
-        sti
-        leave_c
-        ret
-
-cprocend    _PM_setISR
-
-;----------------------------------------------------------------------------
-; void _PM_restoreISR(int irq,PMFARPTR *handler);
-;----------------------------------------------------------------------------
-; Function to set the specific IRQ handler direct in the IDT.
-;----------------------------------------------------------------------------
-cprocstart  _PM_restoreISR
-
-        ARG     irq:UINT, handler:CPTR
-
-        enter_c 0
-        mov     ecx,[handler]
-        mov     dx,[WORD ecx+4]         ; Get selector for old handler
-        mov     ecx,[DWORD ecx]         ; Get address of old handler
-        sidt    [sidtBuf]               ; Get IDTR register into sidtBuf
-        mov     eax,[DWORD sidtBuf+2]   ; Get address of IDT into EAX
-        mov     ebx,[idtEntry]
-        lea     eax,[eax+ebx*8]         ; Get entry in the IDT
-        cli
-        mov     [WORD eax+2],dx         ; Store code segment selector
-        mov     [WORD eax],cx           ; Store low order bits of handler
-        shr     ecx,16
-        mov     [WORD eax+6],cx         ; Store high order bits of handler
-        sti
-        leave_c
-        ret
-
-cprocend    _PM_restoreISR
-
-endcodeseg  _irq
-
-        END                     ; End of module
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm
deleted file mode 100644
index 6cb276d25e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm
+++ /dev/null
@@ -1,281 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows NT device driver
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              Windows NT device drivers.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pm                     ; Set up memory model
-
-P586
-
-begdataseg
-
-; Watcom C++ externals required to link when compiling floating point
-; C code. They are not actually used in the code because we compile with
-; inline floating point instructions, however the compiler still generates
-; the references in the object modules.
-
-__8087      dd  0
-            PUBLIC  __8087
-__imthread:
-__fltused:
-_fltused_   dd  0
-            PUBLIC  __imthread
-            PUBLIC  _fltused_
-            PUBLIC  __fltused
-
-enddataseg
-
-begcodeseg  _pm                 ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstart  PM_segread
-
-        ARG     sregs:DPTR
-
-        enter_c
-
-        mov     ax,es
-        _les    _si,[sregs]
-        mov     [_ES _si],ax
-        mov     [_ES _si+2],cs
-        mov     [_ES _si+4],ss
-        mov     [_ES _si+6],ds
-        mov     [_ES _si+8],fs
-        mov     [_ES _si+10],gs
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstart  PM_int386x
-
-; Not used for NT device drivers
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankA
-
-; Not used for NT device drivers
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankAB
-
-; Not used for NT device drivers
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart      PM_setCRTStart
-
-; Not used for NT device drivers
-
-        ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_readCMOS
-
-        ARG     index:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-        mov     ah,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        mov     al,ah               ; Return value in AL
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_writeCMOS
-
-        ARG     index:UINT, value:UCHAR
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        mov     al,[value]
-        out     71h,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; double _ftol(double f)
-;----------------------------------------------------------------------------
-; Calls to __ftol are generated by the Borland C++ compiler for code
-; that needs to convert a floating point type to an integral type.
-;
-; Input: floating point number on the top of the '87.
-;
-; Output: a (signed or unsigned) long in EAX
-; All other registers preserved.
-;-----------------------------------------------------------------------
-cprocstart  _ftol
-
-        LOCAL   temp1:WORD, temp2:QWORD = LocalSize
-
-        push    ebp
-        mov     ebp,esp
-        sub     esp,LocalSize
-
-        fstcw   [temp1]                 ; save the control word
-        fwait
-        mov     al,[BYTE temp1+1]
-        or      [BYTE temp1+1],0Ch      ; set rounding control to chop
-        fldcw   [temp1]
-        fistp   [temp2]                 ; convert to 64-bit integer
-        mov     [BYTE temp1+1],al
-        fldcw   [temp1]                 ; restore the control word
-        mov     eax,[DWORD temp2]       ; return LS 32 bits
-        mov     edx,[DWORD temp2+4]     ;        MS 32 bits
-
-        mov     esp,ebp
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart  _PM_getPDB
-
-        mov     eax,cr3
-        and     eax,0FFFFF000h
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart  PM_flushTLB
-
-        wbinvd                  ; Flush the CPU cache
-        mov     eax,cr3
-        mov     cr3,eax         ; Flush the TLB
-        ret
-
-cprocend
-
-endcodeseg  _pm
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c
deleted file mode 100644
index d15b07c290..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  VxD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define SetMaxThreadPriority()      0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define RestoreThreadPriority(i)    (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    KeQueryPerformanceCounter((LARGE_INTEGER*)freq);
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                                       \
-{                                                           \
-    LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL);     \
-    (t)->low = lt.LowPart;                                  \
-    (t)->high = lt.HighPart;                                \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c
deleted file mode 100644
index 2c4bd8f42c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT device drivers.
-*
-* Description:  Implementation for the real mode software interrupt
-*               handling functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-We do have limited BIOS access under Windows NT device drivers.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
-    /* Return false unless we have full buffer passing! */
-    return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-len     - Place to store the length of the buffer
-rseg    - Place to store the real mode segment of the buffer
-roff    - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer that is used for communicating with the VESA BIOS functions from
-Win16 and Win32 programs under Windows.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    /* No buffers supported under Windows NT (Windows XP has them however if */
-    /* we ever decide to support this!) */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a protected mode software interrupt.
-****************************************************************************/
-int PMAPI PM_int386(
-    int intno,
-    PMREGS *in,
-    PMREGS *out)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return PM_int386x(intno,in,out,&sregs);
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    /* Not used for Windows NT drivers! */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    /* Not supported in NT drivers */
-    (void)size;
-    (void)r_seg;
-    (void)r_off;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-    /* Not supported in NT drivers */
-    (void)mem;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    /* Not used in NT drivers */
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *regs,
-    RMSREGS *sregs)
-{
-    /* TODO!! */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    /* TODO!! */
-    *out = *in;
-    return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    /* TODO!! */
-    *out = *in;
-    return out->x.ax;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c
deleted file mode 100644
index 9cd52047b7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT device drivers.
-*
-* Description:  Implementation for the NT driver IRQ management functions
-*               for the PM library.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pmint.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int          globalDataStart;
-static uchar        _PM_oldCMOSRegA;
-static uchar        _PM_oldCMOSRegB;
-static uchar        _PM_oldRTCPIC2;
-static ulong        RTC_idtEntry;
-PM_intHandler       _PM_rtcHandler = NULL;
-PMFARPTR    _VARAPI _PM_prevRTC = PMNULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-uchar   _ASMAPI _PM_readCMOS(int index);
-void    _ASMAPI _PM_writeCMOS(int index,uchar value);
-void    _ASMAPI _PM_rtcISR(void);
-void    _ASMAPI _PM_getISR(int irq,PMFARPTR *handler);
-void    _ASMAPI _PM_setISR(int irq,void *handler);
-void    _ASMAPI _PM_restoreISR(int irq,PMFARPTR *handler);
-void    _ASMAPI _PM_irqCodeStart(void);
-void    _ASMAPI _PM_irqCodeEnd(void);
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    static short convert[] = {
-	8192,
-	4096,
-	2048,
-	1024,
-	512,
-	256,
-	128,
-	64,
-	32,
-	16,
-	8,
-	4,
-	2,
-	-1,
-	};
-    int i;
-
-    /* First clear any pending RTC timeout if not cleared */
-    _PM_readCMOS(0x0C);
-    if (frequency == 0) {
-	/* Disable RTC timout */
-	_PM_writeCMOS(0x0A,(uchar)_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,(uchar)(_PM_oldCMOSRegB & 0x0F));
-	}
-    else {
-	/* Convert frequency value to RTC clock indexes */
-	for (i = 0; convert[i] != -1; i++) {
-	    if (convert[i] == frequency)
-		break;
-	    }
-
-	/* Set RTC timout value and enable timeout */
-	_PM_writeCMOS(0x0A,(uchar)(0x20 | (i+3)));
-	_PM_writeCMOS(0x0B,(uchar)((_PM_oldCMOSRegB & 0x0F) | 0x40));
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    static ibool    locked = false;
-
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Install the interrupt handler */
-    RTC_idtEntry = 0x38;
-    _PM_getISR(RTC_idtEntry, &_PM_prevRTC);
-    _PM_rtcHandler = th;
-    _PM_setISR(RTC_idtEntry, _PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,(uchar)(_PM_oldRTCPIC2 & 0xFE));
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(uchar)((PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE)));
-
-	/* Restore the interrupt vector */
-	_PM_restoreISR(RTC_idtEntry, &_PM_prevRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c
deleted file mode 100644
index 3128c6ae38..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c
+++ /dev/null
@@ -1,518 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT device drivers.
-*
-* Description:  Implementation for the NT driver memory management functions
-*               for the PM library.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED           100
-#define MAX_MEMORY_MAPPINGS         100
-#define MAX_MEMORY_LOCKED           100
-
-typedef struct {
-    void    *linear;
-    ulong   length;
-    PMDL    pMdl;
-    } memshared;
-
-typedef struct {
-    void    *linear;
-    void    *mmIoMapped;
-    ulong   length;
-    PMDL    pMdl;
-    } memlocked;
-
-typedef struct {
-    ulong   physical;
-    ulong   linear;
-    ulong   length;
-    ibool   isCached;
-    } mmapping;
-
-static int          numMappings = 0;
-static memshared    shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping     maps[MAX_MEMORY_MAPPINGS];
-static memlocked    locked[MAX_MEMORY_LOCKED];
-
-/*----------------------------- Implementation ----------------------------*/
-
-ulong   PMAPI _PM_getPDB(void);
-
-/* Page table entry flags */
-
-#define PAGE_FLAGS_PRESENT			0x00000001
-#define PAGE_FLAGS_WRITEABLE		0x00000002
-#define PAGE_FLAGS_USER				0x00000004
-#define PAGE_FLAGS_WRITE_THROUGH	0x00000008
-#define PAGE_FLAGS_CACHE_DISABLE	0x00000010
-#define PAGE_FLAGS_ACCESSED			0x00000020
-#define PAGE_FLAGS_DIRTY			0x00000040
-#define PAGE_FLAGS_4MB	            0x00000080
-
-/****************************************************************************
-PARAMETERS:
-base        - Physical base address of the memory to maps in
-limit       - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-static ulong _PM_mapPhysicalToLinear(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    ulong               length = limit+1;
-    PHYSICAL_ADDRESS    paIoBase = {0};
-
-    /* NT loves large Ints */
-    paIoBase = RtlConvertUlongToLargeInteger( base );
-
-    /* Map IO space into Kernel */
-    if (isCached)
-	return (ULONG)MmMapIoSpace(paIoBase, length, MmCached );
-    else
-	return (ULONG)MmMapIoSpace(paIoBase, length, MmNonCached );
-}
-
-/****************************************************************************
-REMARKS:
-Adjust the page table caching bits directly. Requires ring 0 access and
-only works with DOS4GW and compatible extenders (CauseWay also works since
-it has direct support for the ring 0 instructions we need from ring 3). Will
-not work in a DOS box, but we call into the ring 0 helper VxD so we should
-never get here in a DOS box anyway (assuming the VxD is present). If we
-do get here and we are in windows, this code will be skipped.
-****************************************************************************/
-static void _PM_adjustPageTables(
-    ulong linear,
-    ulong limit,
-	ibool isGlobal,
-    ibool isCached)
-{
-    int     startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
-    ulong   pageTable,*pPDB,*pPageTable;
-	ulong	mask = 0xFFFFFFFF;
-	ulong	bits = 0x00000000;
-
-	/* Enable user level access for page table entry */
-	if (isGlobal) {
-		mask &= ~PAGE_FLAGS_USER;
-		bits |= PAGE_FLAGS_USER;
-		}
-
-	/* Disable PCD bit if page table entry should be uncached */
-	if (!isCached) {
-		mask &= ~(PAGE_FLAGS_CACHE_DISABLE | PAGE_FLAGS_WRITE_THROUGH);
-		bits |= (PAGE_FLAGS_CACHE_DISABLE | PAGE_FLAGS_WRITE_THROUGH);
-		}
-
-    pPDB = (ulong*)_PM_mapPhysicalToLinear(_PM_getPDB(),0xFFF,true);
-    if (pPDB) {
-	startPDB = (linear >> 22) & 0x3FF;
-	startPage = (linear >> 12) & 0x3FF;
-	endPDB = ((linear+limit) >> 22) & 0x3FF;
-	endPage = ((linear+limit) >> 12) & 0x3FF;
-	for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
-	    /* Set the bits in the page directory entry - required as per */
-	    /* Pentium 4 manual. This also takes care of the 4MB page entries */
-	    pPDB[iPDB] = (pPDB[iPDB] & mask) | bits;
-	    if (!(pPDB[iPDB] & PAGE_FLAGS_4MB)) {
-		/* If we are dealing with 4KB pages then we need to iterate */
-		/* through each of the page table entries */
-		pageTable = pPDB[iPDB] & ~0xFFF;
-		pPageTable = (ulong*)_PM_mapPhysicalToLinear(pageTable,0xFFF,true);
-		start = (iPDB == startPDB) ? startPage : 0;
-		end = (iPDB == endPDB) ? endPage : 0x3FF;
-		for (iPage = start; iPage <= end; iPage++) {
-		    pPageTable[iPage] = (pPageTable[iPage] & mask) | bits;
-		    }
-		MmUnmapIoSpace(pPageTable,0xFFF);
-		}
-	    }
-	MmUnmapIoSpace(pPDB,0xFFF);
-	PM_flushTLB();
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For NT we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    int         i;
-
-    /* First find a free slot in our shared memory table */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].linear == 0)
-	    break;
-	}
-    if (i == MAX_MEMORY_SHARED)
-	return NULL;
-
-    /* Allocate the paged pool */
-    shared[i].linear = ExAllocatePool(PagedPool, size);
-
-    /* Create a list to manage this allocation */
-    shared[i].pMdl = IoAllocateMdl(shared[i].linear,size,FALSE,FALSE,(PIRP) NULL);
-
-    /* Lock this allocation in memory */
-    MmProbeAndLockPages(shared[i].pMdl,KernelMode,IoModifyAccess);
-
-    /* Modify bits to grant user access */
-    _PM_adjustPageTables((ulong)shared[i].linear, size, true, true);
-    return (void*)shared[i].linear;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(
-    void *p)
-{
-    int i;
-
-    /* Find a shared memory block in our table and free it */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].linear == p) {
-	    /* Unlock what we locked */
-	    MmUnlockPages(shared[i].pMdl);
-
-	    /* Free our MDL */
-	    IoFreeMdl(shared[i].pMdl);
-
-	    /* Free our mem */
-	    ExFreePool(shared[i].linear);
-
-	    /* Flag that is entry is available */
-	    shared[i].linear = 0;
-	    break;
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    ulong   linear,length = limit+1;
-    int     i;
-
-    /* Search table of existing mappings to see if we have already mapped */
-    /* a region of memory that will serve this purpose. */
-    for (i = 0; i < numMappings; i++) {
-	if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached) {
-	    _PM_adjustPageTables((ulong)maps[i].linear, maps[i].length, true, isCached);
-	    return (void*)maps[i].linear;
-	    }
-	}
-    if (numMappings == MAX_MEMORY_MAPPINGS)
-	return NULL;
-
-    /* We did not find any previously mapped memory region, so maps it in. */
-    if ((linear = _PM_mapPhysicalToLinear(base,limit,isCached)) == 0xFFFFFFFF)
-	return NULL;
-    maps[numMappings].physical = base;
-    maps[numMappings].length = length;
-    maps[numMappings].linear = linear;
-    maps[numMappings].isCached = isCached;
-    numMappings++;
-
-    /* Grant user access to this I/O space */
-    _PM_adjustPageTables((ulong)linear, length, true, isCached);
-    return (void*)linear;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    /* We don't free the memory mappings in here because we cache all */
-    /* the memory mappings we create in the system for later use. */
-}
-
-/****************************************************************************
-REMARKS:
-Called when the device driver unloads to free all the page table mappings!
-****************************************************************************/
-void PMAPI _PM_freeMemoryMappings(void)
-{
-    int i;
-
-    for (i = 0; i < numMappings; i++)
-	MmUnmapIoSpace((void *)maps[i].linear,maps[i].length);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
-    void *p)
-{
-    PHYSICAL_ADDRESS    paOurAddress;
-
-    paOurAddress = MmGetPhysicalAddress(p);
-    return paOurAddress.LowPart;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    int     i;
-    ulong   linear = (ulong)p & ~0xFFF;
-
-    for (i = (length + 0xFFF) >> 12; i > 0; i--) {
-	if ((*physAddress++ = PM_getPhysicalAddr((void*)linear)) == 0xFFFFFFFF)
-	    return false;
-	linear += 4096;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    int                 i;
-    PHYSICAL_ADDRESS    paOurAddress;
-
-    /* First find a free slot in our shared memory table */
-    for (i = 0; i < MAX_MEMORY_LOCKED; i++) {
-	if (locked[i].linear == 0)
-	    break;
-	}
-    if (i == MAX_MEMORY_LOCKED)
-	return NULL;
-
-    /* HighestAcceptableAddress - Specifies the highest valid physical address */
-    /* the driver can use. For example, if a device can only reference physical */
-    /* memory in the lower 16MB, this value would be set to 0x00000000FFFFFF. */
-    paOurAddress.HighPart = 0;
-    if (below16M)
-	paOurAddress.LowPart = 0x00FFFFFF;
-    else
-	paOurAddress.LowPart = 0xFFFFFFFF;
-
-    if (contiguous) {
-	/* Allocate from the non-paged pool (unfortunately 4MB pages) */
-	locked[i].linear = MmAllocateContiguousMemory(size, paOurAddress);
-	if (!locked[i].linear)
-	    return NULL;
-
-	/* Flag no MDL */
-	locked[i].pMdl = NULL;
-
-	/* Map the physical address for the memory so we can manage */
-	/* the page tables in 4KB chunks mapped into user space. */
-
-	/* TODO: Map this with the physical address to the linear addresss */
-	locked[i].mmIoMapped = locked[i].linear;
-
-	/* Modify bits to grant user access, flag not cached */
-	_PM_adjustPageTables((ulong)locked[i].mmIoMapped, size, true, false);
-	return (void*)locked[i].mmIoMapped;
-	}
-    else {
-	/* Allocate from the paged pool */
-	locked[i].linear = ExAllocatePool(PagedPool, size);
-	if (!locked[i].linear)
-	    return NULL;
-
-	/* Create a list to manage this allocation */
-	locked[i].pMdl = IoAllocateMdl(locked[i].linear,size,FALSE,FALSE,(PIRP) NULL);
-
-	/* Lock this allocation in memory */
-	MmProbeAndLockPages(locked[i].pMdl,KernelMode,IoModifyAccess);
-
-	/* Modify bits to grant user access, flag not cached */
-	_PM_adjustPageTables((ulong)locked[i].linear, size, true, false);
-	return (void*)locked[i].linear;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    int i;
-
-    /* Find a locked memory block in our table and free it */
-    for (i = 0; i < MAX_MEMORY_LOCKED; i++) {
-	if (locked[i].linear == p) {
-	    /* An Mdl indicates that we used the paged pool, and locked it, */
-	    /* so now we have to unlock, free the MDL, and free paged */
-	    if (locked[i].pMdl) {
-		/* Unlock what we locked and free the Mdl */
-		MmUnlockPages(locked[i].pMdl);
-		IoFreeMdl(locked[i].pMdl);
-		ExFreePool(locked[i].linear);
-		}
-	    else {
-		/* TODO: Free the mmIoMap mapping for the memory! */
-
-		/* Free non-paged pool */
-		MmFreeContiguousMemory(locked[i].linear);
-		}
-
-	    /* Flag that is entry is available */
-	    locked[i].linear = 0;
-	    break;
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    /* Allocate the memory from the non-paged pool if we want the memory */
-    /* to be locked. */
-    return ExAllocatePool(
-	locked ? NonPagedPoolCacheAligned : PagedPoolCacheAligned,
-	PAGE_SIZE);
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
-    void *p)
-{
-    if (p) ExFreePool(p);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lh)
-{
-    MDL *pMdl;
-
-    /* Create a list to manage this allocation */
-    if ((pMdl = IoAllocateMdl(p,len,FALSE,FALSE,(PIRP)NULL)) == NULL)
-	return false;
-
-    /* Lock this allocation in memory */
-    MmProbeAndLockPages(pMdl,KernelMode,IoModifyAccess);
-    *((PMDL*)(&lh->h)) = pMdl;
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lh)
-{
-    if (p && lh) {
-	/* Unlock what we locked */
-	MDL *pMdl = *((PMDL*)(&lh->h));
-	MmUnlockPages(pMdl);
-	IoFreeMdl(pMdl);
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lh)
-{
-    return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lh)
-{
-    return PM_unlockDataPages((void*)p,len,lh);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h
deleted file mode 100644
index 65b7bae23c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT drivers
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#ifndef __NTDRV_OSHDR_H
-#define __NTDRV_OSHDR_H
-
-/*--------------------------- Macros and Typedefs -------------------------*/
-
-/*---------------------------- Global variables ---------------------------*/
-
-/*--------------------------- Function Prototypes -------------------------*/
-
-/* Internal unicode string handling functions */
-
-UNICODE_STRING *    _PM_CStringToUnicodeString(const char *cstr);
-void                _PM_FreeUnicodeString(UNICODE_STRING *uniStr);
-
-#endif  /* __NTDRV_OSHDR_H */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c
deleted file mode 100644
index c6606314c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT device drivers.
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-char                _PM_cntPath[PM_MAX_PATH] = "";
-char                _PM_nucleusPath[PM_MAX_PATH] = "";
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-static char *szNTWindowsKey     = "\\REGISTRY\\Machine\\Software\\Microsoft\\Windows NT\\CurrentVersion";
-static char *szNTSystemRoot     = "SystemRoot";
-static char *szMachineNameKey   = "\\REGISTRY\\Machine\\System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineNameKeyNT = "\\REGISTRY\\Machine\\System\\CurrentControlSet\\control\\ComputerName\\ActiveComputerName";
-static char *szMachineName      = "ComputerName";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    /* Initialiase the MTRR module */
-    MTRR_init();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
-    return _OS_WINNTDRV;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
-    return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Handle fatal errors internally in the driver.
-****************************************************************************/
-void PMAPI PM_fatalError(
-    const char *msg)
-{
-    ULONG   BugCheckCode = 0;
-    ULONG   MoreBugCheckData[4] = {0};
-    char    *p;
-    ULONG   len;
-
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-
-#ifdef DBG	/* Send output to debugger, just return so as not to force a reboot */
-#pragma message("INFO: building for debug, PM_fatalError() re-routed")
-	DBGMSG2("SDDHELP> PM_fatalError(): ERROR: %s\n", msg);
-	return ;
-#endif
-    /* KeBugCheckEx brings down the system in a controlled */
-    /* manner when the caller discovers an unrecoverable */
-    /* inconsistency that would corrupt the system if */
-    /* the caller continued to run. */
-    /* */
-    /* hack - dump the first 20 chars in hex using the variables */
-    /*      provided - Each ULONG is equal to four characters... */
-    for(len = 0; len < 20; len++)
-	if (msg[len] == (char)0)
-	    break;
-
-    /* This looks bad but it's quick and reliable... */
-    p = (char *)&BugCheckCode;
-    if(len > 0) p[3] = msg[0];
-    if(len > 1) p[2] = msg[1];
-    if(len > 2) p[1] = msg[2];
-    if(len > 3) p[0] = msg[3];
-
-    p = (char *)&MoreBugCheckData[0];
-    if(len > 4) p[3] = msg[4];
-    if(len > 5) p[2] = msg[5];
-    if(len > 6) p[1] = msg[6];
-    if(len > 7) p[0] = msg[7];
-
-    p = (char *)&MoreBugCheckData[1];
-    if(len > 8) p[3] = msg[8];
-    if(len > 9) p[2] = msg[9];
-    if(len > 10) p[1] = msg[10];
-    if(len > 11) p[0] = msg[11];
-
-    p = (char *)&MoreBugCheckData[2];
-    if(len > 12) p[3] = msg[12];
-    if(len > 13) p[2] = msg[13];
-    if(len > 14) p[1] = msg[14];
-    if(len > 15) p[0] = msg[15];
-
-    p = (char *)&MoreBugCheckData[3];
-    if(len > 16) p[3] = msg[16];
-    if(len > 17) p[2] = msg[17];
-    if(len > 18) p[1] = msg[18];
-    if(len > 19) p[0] = msg[19];
-
-    /* Halt the system! */
-    KeBugCheckEx(BugCheckCode, MoreBugCheckData[0], MoreBugCheckData[1], MoreBugCheckData[2], MoreBugCheckData[3]);
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    strncpy(path,_PM_cntPath,maxLen);
-    path[maxLen-1] = 0;
-    return path;
-}
-
-/****************************************************************************
-PARAMETERS:
-szKey       - Key to query (can contain version number formatting)
-szValue     - Value to get information for
-value       - Place to store the registry key data read
-size        - Size of the string buffer to read into
-
-RETURNS:
-true if the key was found, false if not.
-****************************************************************************/
-static ibool REG_queryString(
-    char *szKey,
-    const char *szValue,
-    char *value,
-    DWORD size)
-{
-    ibool                           status;
-    NTSTATUS                        rval;
-    ULONG                           length;
-    HANDLE                          Handle;
-    OBJECT_ATTRIBUTES               keyAttributes;
-    UNICODE_STRING                  *uniKey = NULL;
-    UNICODE_STRING                  *uniValue = NULL;
-    PKEY_VALUE_FULL_INFORMATION		fullInfo = NULL;
-    STRING                          stringdata;
-    UNICODE_STRING                  unidata;
-
-    /* Convert strings to UniCode */
-    status = false;
-    if ((uniKey = _PM_CStringToUnicodeString(szKey)) == NULL)
-	goto Exit;
-    if ((uniValue = _PM_CStringToUnicodeString(szValue)) == NULL)
-	goto Exit;
-
-    /* Open the key */
-    InitializeObjectAttributes( &keyAttributes,
-				uniKey,
-				OBJ_CASE_INSENSITIVE,
-				NULL,
-				NULL );
-    rval = ZwOpenKey( &Handle,
-		      KEY_ALL_ACCESS,
-		      &keyAttributes );
-    if (!NT_SUCCESS(rval))
-	goto Exit;
-
-    /* Query the value */
-    length = sizeof (KEY_VALUE_FULL_INFORMATION)
-	   + size * sizeof(WCHAR);
-    if ((fullInfo = ExAllocatePool (PagedPool, length)) == NULL)
-	goto Exit;
-    RtlZeroMemory(fullInfo, length);
-    rval = ZwQueryValueKey (Handle,
-			    uniValue,
-			    KeyValueFullInformation,
-			    fullInfo,
-			    length,
-			    &length);
-    if (NT_SUCCESS (rval)) {
-	/* Create the UniCode string so we can convert it */
-	unidata.Buffer = (PWCHAR)(((PCHAR)fullInfo) + fullInfo->DataOffset);
-	unidata.Length = (USHORT)fullInfo->DataLength;
-	unidata.MaximumLength = (USHORT)fullInfo->DataLength + sizeof(WCHAR);
-
-	/* Convert unicode univalue to ansi string. */
-	rval = RtlUnicodeStringToAnsiString(&stringdata, &unidata, TRUE);
-	if (NT_SUCCESS(rval)) {
-	    strcpy(value,stringdata.Buffer);
-	    status = true;
-	    }
-	}
-
-Exit:
-    if (fullInfo) ExFreePool(fullInfo);
-    if (uniKey) _PM_FreeUnicodeString(uniKey);
-    if (uniValue) _PM_FreeUnicodeString(uniValue);
-    return status;
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
-    char path[256];
-    if (REG_queryString(szNTWindowsKey,szNTSystemRoot,path,sizeof(path)))
-	return 'c';
-    return path[0];
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[256];
-
-    if (strlen(_PM_nucleusPath) > 0) {
-	strcpy(path,_PM_nucleusPath);
-	PM_backslash(path);
-	return path;
-	}
-    if (!REG_queryString(szNTWindowsKey,szNTSystemRoot,path,sizeof(path)))
-	strcpy(path,"c:\\winnt");
-    PM_backslash(path);
-    strcat(path,"system32\\nucleus");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
-    return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
-    static char name[256];
-
-    if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
-	return name;
-    if (REG_queryString(szMachineNameKeyNT,szMachineName,name,sizeof(name)))
-	return name;
-    return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
-    /* Not used in NT drivers */
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
-    /* Not used in NT drivers */
-    return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Open a console for output to the screen, creating the main event handling
-window if necessary.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hwndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-    /* Not used in NT drivers */
-    (void)hwndUser;
-    (void)device;
-    (void)xRes;
-    (void)yRes;
-    (void)bpp;
-    (void)fullScreen;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* Not used in NT drivers */
-    return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
-    void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Not used in NT drivers */
-    (void)stateBuf;
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
-    PM_saveState_cb saveState)
-{
-    /* Not used in NT drivers */
-    (void)saveState;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
-    const void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Not used in NT drivers */
-    (void)stateBuf;
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
-    PM_HWND hwndConsole)
-{
-    /* Not used in NT drivers */
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PMAPI PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    /* Nothing to do for Windows */
-    (void)x;
-    (void)y;
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PMAPI PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    /* Nothing to do for Windows */
-    (void)width;
-    (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Maps a shared memory block into process address space. Does nothing since
-the memory blocks are already globally mapped into all processes.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    /* Not used anymore */
-    (void)base;
-    (void)limit;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    /* This may not be possible in NT and should be done by the OS anyway */
-    (void)axVal;
-    (void)BIOSPhysAddr;
-    (void)mappedBIOS;
-    (void)BIOSLen;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
-    /* Note that on NT this probably does not do what we expect! */
-    return PM_mapPhysicalAddr(0x400, 0x1000, true);
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
-    return PM_mapPhysicalAddr(0xA0000,0xFFFF,false);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
-    ulong milliseconds)
-{
-    /* We never use this in NT drivers */
-    (void)milliseconds;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	case 2: return 0x3E8;
-	case 3: return 0x2E8;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Returns available memory. Not possible under Windows.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* Not used in NT drivers */
-    (void)szDLLName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* Not used in NT drivers */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* Not used in NT drivers */
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    /* TODO: This function should start a directory enumeration search */
-    /*       given the filename (with wildcards). The data should be */
-    /*       converted and returned in the findData standard form. */
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    /* TODO: This function should find the next file in directory enumeration */
-    /*       search given the search criteria defined in the call to */
-    /*       PM_findFirstFile. The data should be converted and returned */
-    /*       in the findData standard form. */
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    /* TODO: This function should close the find process. This may do */
-    /*       nothing for some OS'es. */
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    /* Not supported in NT drivers */
-    (void)drive;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    /* Not supported in NT drivers */
-    (void)drive;
-    (void)dir;
-    (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-    return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    NTSTATUS                status;
-    ACCESS_MASK             DesiredAccess = GENERIC_READ | GENERIC_WRITE;
-    OBJECT_ATTRIBUTES       ObjectAttributes;
-    ULONG                   ShareAccess = FILE_SHARE_READ;
-    ULONG                   CreateDisposition = FILE_OPEN;
-    HANDLE                  FileHandle = NULL;
-    UNICODE_STRING          *uniFile = NULL;
-    IO_STATUS_BLOCK         IoStatusBlock;
-    FILE_BASIC_INFORMATION  FileBasic;
-    char                    kernelFilename[PM_MAX_PATH+5];
-    ULONG                   FileAttributes = 0;
-
-    /* Convert file attribute flags */
-    if (attrib & PM_FILE_READONLY)
-	FileAttributes |= FILE_ATTRIBUTE_READONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	FileAttributes |= FILE_ATTRIBUTE_ARCHIVE;
-    if (attrib & PM_FILE_HIDDEN)
-	FileAttributes |= FILE_ATTRIBUTE_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	FileAttributes |= FILE_ATTRIBUTE_SYSTEM;
-
-    /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
-    strcpy(kernelFilename, "\\??\\");
-    strcat(kernelFilename, filename);
-
-    /* Convert filename string to ansi string */
-    if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
-	goto Exit;
-
-    /* Must open a file to query it's attributes */
-    InitializeObjectAttributes (&ObjectAttributes,
-				uniFile,
-				OBJ_CASE_INSENSITIVE,
-				NULL,
-				NULL );
-    status = ZwCreateFile( &FileHandle,
-			    DesiredAccess | SYNCHRONIZE,
-			    &ObjectAttributes,
-			    &IoStatusBlock,
-			    NULL,                  /*AllocationSize  OPTIONAL, */
-			    FILE_ATTRIBUTE_NORMAL,
-			    ShareAccess,
-			    CreateDisposition,
-			    FILE_RANDOM_ACCESS,        /*CreateOptions, */
-			    NULL,                  /*EaBuffer  OPTIONAL, */
-			    0                      /*EaLength (required if EaBuffer) */
-			    );
-    if (!NT_SUCCESS (status))
-	goto Exit;
-
-    /* Query timestamps */
-    status = ZwQueryInformationFile(FileHandle,
-				    &IoStatusBlock,
-				    &FileBasic,
-				    sizeof(FILE_BASIC_INFORMATION),
-				    FileBasicInformation
-				    );
-    if (!NT_SUCCESS (status))
-	goto Exit;
-
-    /* Change the four bits we change */
-    FileBasic.FileAttributes &= ~(FILE_ATTRIBUTE_READONLY | FILE_ATTRIBUTE_ARCHIVE
-				  | FILE_ATTRIBUTE_HIDDEN | FILE_ATTRIBUTE_SYSTEM);
-    FileBasic.FileAttributes |= FileAttributes;
-
-    /* Set timestamps */
-    ZwSetInformationFile(   FileHandle,
-			    &IoStatusBlock,
-			    &FileBasic,
-			    sizeof(FILE_BASIC_INFORMATION),
-			    FileBasicInformation
-			    );
-
-Exit:
-    if (FileHandle) ZwClose(FileHandle);
-    if (uniFile) _PM_FreeUnicodeString(uniFile);
-    return;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    NTSTATUS                status;
-    ACCESS_MASK             DesiredAccess = GENERIC_READ | GENERIC_WRITE;
-    OBJECT_ATTRIBUTES       ObjectAttributes;
-    ULONG                   ShareAccess = FILE_SHARE_READ;
-    ULONG                   CreateDisposition = FILE_OPEN;
-    HANDLE                  FileHandle = NULL;
-    UNICODE_STRING          *uniFile = NULL;
-    IO_STATUS_BLOCK         IoStatusBlock;
-    FILE_BASIC_INFORMATION  FileBasic;
-    char                    kernelFilename[PM_MAX_PATH+5];
-    ULONG                   FileAttributes = 0;
-    uint                    retval = 0;
-
-    /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
-    strcpy(kernelFilename, "\\??\\");
-    strcat(kernelFilename, filename);
-
-    /* Convert filename string to ansi string */
-    if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
-	goto Exit;
-
-    /* Must open a file to query it's attributes */
-    InitializeObjectAttributes (&ObjectAttributes,
-				uniFile,
-				OBJ_CASE_INSENSITIVE,
-				NULL,
-				NULL );
-    status = ZwCreateFile( &FileHandle,
-			   DesiredAccess | SYNCHRONIZE,
-			   &ObjectAttributes,
-			   &IoStatusBlock,
-			   NULL,                  /*AllocationSize  OPTIONAL, */
-			   FILE_ATTRIBUTE_NORMAL,
-			   ShareAccess,
-			   CreateDisposition,
-			   FILE_RANDOM_ACCESS,        /*CreateOptions, */
-			   NULL,                  /*EaBuffer  OPTIONAL, */
-			   0                      /*EaLength (required if EaBuffer) */
-			   );
-    if (!NT_SUCCESS (status))
-	goto Exit;
-
-    /* Query timestamps */
-    status = ZwQueryInformationFile(FileHandle,
-				    &IoStatusBlock,
-				    &FileBasic,
-				    sizeof(FILE_BASIC_INFORMATION),
-				    FileBasicInformation
-				    );
-    if (!NT_SUCCESS (status))
-	goto Exit;
-
-    /* Translate the file attributes */
-    if (FileBasic.FileAttributes & FILE_ATTRIBUTE_READONLY)
-	retval |= PM_FILE_READONLY;
-    if (FileBasic.FileAttributes & FILE_ATTRIBUTE_ARCHIVE)
-	retval |= PM_FILE_ARCHIVE;
-    if (FileBasic.FileAttributes & FILE_ATTRIBUTE_HIDDEN)
-	retval |= PM_FILE_HIDDEN;
-    if (FileBasic.FileAttributes & FILE_ATTRIBUTE_SYSTEM)
-	retval |= PM_FILE_SYSTEM;
-
-Exit:
-    if (FileHandle) ZwClose(FileHandle);
-    if (uniFile) _PM_FreeUnicodeString(uniFile);
-    return retval;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    /* Not supported in NT drivers */
-    (void)filename;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    /* Not supported in NT drivers */
-    (void)filename;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* Not supported in NT drivers */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* Not supported in NT drivers */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c
deleted file mode 100644
index 658f1c80ab..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT driver
-*
-* Description:  C library compatible I/O functions for use within a Windows
-*               NT driver.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
-    const char *filename,
-    const char *mode)
-{
-    ACCESS_MASK                 DesiredAccess;      /* for ZwCreateFile... */
-    OBJECT_ATTRIBUTES           ObjectAttributes;
-    ULONG                       ShareAccess;
-    ULONG                       CreateDisposition;
-    NTSTATUS                    status;
-    HANDLE                      FileHandle;
-    UNICODE_STRING              *uniFile = NULL;
-    PWCHAR                      bufFile = NULL;
-    IO_STATUS_BLOCK             IoStatusBlock;
-    FILE_STANDARD_INFORMATION   FileInformation;
-    FILE_POSITION_INFORMATION   FilePosition;
-    char                        kernelFilename[PM_MAX_PATH+5];
-    FILE                        *f;
-
-    /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
-    strcpy(kernelFilename, "\\??\\");
-    strcat(kernelFilename, filename);
-    if ((f = PM_malloc(sizeof(FILE))) == NULL)
-	goto Error;
-    f->offset = 0;
-    f->text = (mode[1] == 't' || mode[2] == 't');
-    f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
-    if (mode[0] == 'r') {
-	/* omode = OPEN_ACCESS_READONLY | OPEN_SHARE_COMPATIBLE; */
-	/* action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_FAIL; */
-	DesiredAccess = GENERIC_READ;
-	ShareAccess = FILE_SHARE_READ | FILE_SHARE_WRITE;
-	CreateDisposition = FILE_OPEN;
-	}
-    else if (mode[0] == 'w') {
-	/* omode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_COMPATIBLE; */
-	/* action = ACTION_IFEXISTS_TRUNCATE | ACTION_IFNOTEXISTS_CREATE; */
-	DesiredAccess = GENERIC_WRITE;
-	ShareAccess = FILE_SHARE_READ | FILE_SHARE_WRITE;
-	CreateDisposition = FILE_SUPERSEDE;
-	}
-    else {
-	/* omode = OPEN_ACCESS_READWRITE | OPEN_SHARE_COMPATIBLE; */
-	/* action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_CREATE; */
-	DesiredAccess = GENERIC_READ | GENERIC_WRITE;
-	ShareAccess = FILE_SHARE_READ;
-	CreateDisposition = FILE_OPEN_IF;
-	}
-
-    /* Convert filename string to ansi string and then to UniCode string */
-    if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
-	return NULL;
-
-    /* Create the file */
-    InitializeObjectAttributes (&ObjectAttributes,
-				uniFile,
-				OBJ_CASE_INSENSITIVE,
-				NULL,
-				NULL);
-    status = ZwCreateFile( &FileHandle,
-			    DesiredAccess | SYNCHRONIZE,
-			    &ObjectAttributes,
-			    &IoStatusBlock,
-			    NULL,                   /* AllocationSize  OPTIONAL, */
-			    FILE_ATTRIBUTE_NORMAL,
-			    ShareAccess,
-			    CreateDisposition,
-			    FILE_RANDOM_ACCESS,     /* CreateOptions, */
-			    NULL,                   /* EaBuffer  OPTIONAL, */
-			    0                       /* EaLength (required if EaBuffer) */
-			    );
-    if (!NT_SUCCESS (status))
-	goto Error;
-    f->handle = (int)FileHandle;
-
-    /* Determine size of the file */
-    status = ZwQueryInformationFile(  FileHandle,
-				      &IoStatusBlock,
-				      &FileInformation,
-				      sizeof(FILE_STANDARD_INFORMATION),
-				      FileStandardInformation
-				      );
-    if (!NT_SUCCESS (status))
-	goto Error;
-    f->filesize = FileInformation.EndOfFile.LowPart;
-
-    /* Move to the end of the file if we are appending */
-    if (mode[0] == 'a') {
-	FilePosition.CurrentByteOffset.HighPart = 0;
-	FilePosition.CurrentByteOffset.LowPart = f->filesize;
-	status = ZwSetInformationFile(  FileHandle,
-					&IoStatusBlock,
-					&FilePosition,
-					sizeof(FILE_POSITION_INFORMATION),
-					FilePositionInformation
-					);
-	if (!NT_SUCCESS (status))
-	    goto Error;
-	}
-    return f;
-
-Error:
-    if (f) PM_free(f);
-    if (uniFile) _PM_FreeUnicodeString(uniFile);
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fread function.
-****************************************************************************/
-size_t fread(
-    void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    NTSTATUS        status;
-    IO_STATUS_BLOCK IoStatusBlock;
-    LARGE_INTEGER   ByteOffset;
-
-    /* Read any extra bytes from the file */
-    ByteOffset.HighPart = 0;
-    ByteOffset.LowPart = f->offset;
-    status = ZwReadFile( (HANDLE)f->handle,
-			 NULL,              /*IN HANDLE  Event  OPTIONAL, */
-			 NULL,              /*  IN PIO_APC_ROUTINE  ApcRoutine  OPTIONAL, */
-			 NULL,              /*  IN PVOID  ApcContext  OPTIONAL, */
-			 &IoStatusBlock,
-			 ptr,               /*  OUT PVOID  Buffer, */
-			 size * n,          /*IN ULONG  Length, */
-			 &ByteOffset,       /*OPTIONAL, */
-			 NULL               /*IN PULONG  Key  OPTIONAL */
-			 );
-    if (!NT_SUCCESS (status))
-	return 0;
-    f->offset += IoStatusBlock.Information;
-    return IoStatusBlock.Information / size;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fwrite function.
-****************************************************************************/
-size_t fwrite(
-    const void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    NTSTATUS        status;
-    IO_STATUS_BLOCK IoStatusBlock;
-    LARGE_INTEGER   ByteOffset;
-
-    if (!f->writemode)
-	return 0;
-    ByteOffset.HighPart = 0;
-    ByteOffset.LowPart = f->offset;
-    status = ZwWriteFile( (HANDLE)f->handle,
-			  NULL,             /*IN HANDLE  Event  OPTIONAL, */
-			  NULL,             /*  IN PIO_APC_ROUTINE  ApcRoutine  OPTIONAL, */
-			  NULL,             /*  IN PVOID  ApcContext  OPTIONAL, */
-			  &IoStatusBlock,
-			  (void*)ptr,       /*  OUT PVOID  Buffer, */
-			  size * n,         /*IN ULONG  Length, */
-			  &ByteOffset,      /*OPTIONAL, */
-			  NULL              /*IN PULONG  Key  OPTIONAL */
-			  );
-    if (!NT_SUCCESS (status))
-	return 0;
-    f->offset += IoStatusBlock.Information;
-    if (f->offset > f->filesize)
-	f->filesize = f->offset;
-    return IoStatusBlock.Information / size;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
-    FILE *f)
-{
-    /* Nothing to do here as we are not doing buffered I/O */
-    (void)f;
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
-    FILE *f,
-    long int offset,
-    int whence)
-{
-    NTSTATUS                    status;
-    FILE_POSITION_INFORMATION   FilePosition;
-    IO_STATUS_BLOCK             IoStatusBlock;
-
-    if (whence == 0)
-	f->offset = offset;
-    else if (whence == 1)
-	f->offset += offset;
-    else if (whence == 2)
-	f->offset = f->filesize + offset;
-    FilePosition.CurrentByteOffset.HighPart = 0;
-    FilePosition.CurrentByteOffset.LowPart = f->offset;
-    status = ZwSetInformationFile( (HANDLE)f->handle,
-				   &IoStatusBlock,
-				   &FilePosition,
-				   sizeof(FILE_POSITION_INFORMATION),
-				   FilePositionInformation
-				   );
-    if (!NT_SUCCESS (status))
-	return -1;
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
-    FILE *f)
-{
-    return f->offset;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
-    FILE *f)
-{
-    return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
-    char *s,
-    int n,
-    FILE *f)
-{
-    int     len;
-    char    *cs;
-
-    /* Read the entire buffer into memory (our functions are unbuffered!) */
-    if ((len = fread(s,1,n,f)) == 0)
-	return NULL;
-
-    /* Search for '\n' or end of string */
-    if (n > len)
-	n = len;
-    cs = s;
-    while (--n > 0) {
-	if (*cs == '\n')
-	    break;
-	cs++;
-	}
-    *cs = '\0';
-    return s;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
-    const char *s,
-    FILE *f)
-{
-    return fwrite(s,1,strlen(s),f);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
-    FILE *f)
-{
-    ZwClose((HANDLE)f->handle);
-    PM_free(f);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c
deleted file mode 100644
index bbf0cbf4a7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows NT driver
-*
-* Description:  C library compatible stdlib.h functions for use within a
-*               Windows NT driver.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-/****************************************************************************
-REMARKS:
-PM_malloc override function for Nucleus drivers loaded in NT drivers's.
-****************************************************************************/
-void * malloc(
-    size_t size)
-{
-    return PM_mallocShared(size);
-}
-
-/****************************************************************************
-REMARKS:
-calloc library function for Nucleus drivers loaded in NT drivers's.
-****************************************************************************/
-void * calloc(
-    size_t nelem,
-    size_t size)
-{
-    void *p = PM_mallocShared(nelem * size);
-    if (p)
-	memset(p,0,nelem * size);
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_realloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * realloc(
-    void *ptr,
-    size_t size)
-{
-    void *p = PM_mallocShared(size);
-    if (p) {
-	memcpy(p,ptr,size);
-	PM_freeShared(ptr);
-	}
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_free override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void free(
-    void *p)
-{
-    PM_freeShared(p);
-}
-
-/****************************************************************************
-PARAMETERS:
-cstr    - C style ANSI string to convert
-
-RETURNS:
-Pointer to the UniCode string structure or NULL on failure to allocate memory
-
-REMARKS:
-Converts a C style string to a UniCode string structure that can be passed
-directly to NT kernel functions.
-****************************************************************************/
-UNICODE_STRING *_PM_CStringToUnicodeString(
-    const char *cstr)
-{
-    int             length;
-    ANSI_STRING     ansiStr;
-    UNICODE_STRING  *uniStr;
-
-    /* Allocate memory for the string structure */
-    if ((uniStr = ExAllocatePool(NonPagedPool, sizeof(UNICODE_STRING))) == NULL)
-	return NULL;
-
-    /* Allocate memory for the wide string itself */
-    length = (strlen(cstr) * sizeof(WCHAR)) + sizeof(WCHAR);
-    if ((uniStr->Buffer = ExAllocatePool(NonPagedPool, length)) == NULL) {
-	ExFreePool(uniStr);
-	return NULL;
-	}
-    RtlZeroMemory(uniStr->Buffer, length);
-    uniStr->Length = 0;
-    uniStr->MaximumLength = (USHORT)length;
-
-    /* Convert filename string to ansi string and then to UniCode string */
-    RtlInitAnsiString(&ansiStr, cstr);
-    RtlAnsiStringToUnicodeString(uniStr, &ansiStr, FALSE);
-    return uniStr;
-}
-
-/****************************************************************************
-PARAMETERS:
-uniStr  - UniCode string structure to free
-
-REMARKS:
-Frees a string allocated by the above _PM_CStringToUnicodeString function.
-****************************************************************************/
-void _PM_FreeUnicodeString(
-    UNICODE_STRING *uniStr)
-{
-    if (uniStr) {
-	ExFreePool(uniStr->Buffer);
-	ExFreePool(uniStr);
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c
deleted file mode 100644
index 901ce1cf03..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c
deleted file mode 100644
index f4c4bd41b2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ulong            start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-static void __ZTimerInit(void)
-{
-    KeQueryPerformanceCounter((LARGE_INTEGER*)&countFreq);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static void __LZTimerOn(
-    LZTimerObject *tm)
-{
-    LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL);
-    tm->start.low = lt.LowPart;
-    tm->start.high = lt.HighPart;
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    LARGE_INTEGER       tmLap = KeQueryPerformanceCounter(NULL);
-    CPU_largeInteger    tmCount;
-
-    _CPU_diffTime64(&tm->start,(CPU_largeInteger*)&tmLap,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,countFreq.low);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static void __LZTimerOff(
-    LZTimerObject *tm)
-{
-    LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL);
-    tm->end.low = lt.LowPart;
-    tm->end.high = lt.HighPart;
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmCount;
-
-    _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,countFreq.low);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    LARGE_INTEGER count;
-    KeQuerySystemTime(&count);
-    return (ulong)(*((_int64*)&count) / 10);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm b/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm
deleted file mode 100644
index 761f0f42e1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm
+++ /dev/null
@@ -1,180 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: OS/2 32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific
-;*              to OS/2
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pmos2                  ; Set up memory model
-
-begdataseg  _pmos2
-
-        cglobal _PM_ioentry
-        cglobal _PM_gdt
-_PM_ioentry     dd  0               ; Offset to call gate
-_PM_gdt         dw  0               ; Selector to call gate
-
-enddataseg  _pmos2
-
-begcodeseg  _pmos2                  ; Start of code segment
-
-;----------------------------------------------------------------------------
-; int PM_setIOPL(int iopl)
-;----------------------------------------------------------------------------
-; Change the IOPL level for the 32-bit task. Returns the previous level
-; so it can be restored for the task correctly.
-;----------------------------------------------------------------------------
-cprocstart  PM_setIOPL
-
-        ARG     iopl:UINT
-
-        enter_c
-        pushfd                      ; Save the old EFLAGS for later
-        mov     ecx,[iopl]          ; ECX := IOPL level
-        xor     ebx,ebx             ; Change IOPL level function code (0)
-ifdef   USE_NASM
-        call far dword [_PM_ioentry]
-else
-        call    [FWORD _PM_ioentry]
-endif
-        pop     eax
-        and     eax,0011000000000000b
-        shr     eax,12
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_setGDTSelLimit(ushort selector, ulong limit);
-;----------------------------------------------------------------------------
-; Change the GDT selector limit to given value. Used to change selector
-; limits to address the entire system address space.
-;----------------------------------------------------------------------------
-cprocstart  _PM_setGDTSelLimit
-
-        ARG     selector:USHORT, limit:UINT
-        
-        enter_c
-        sub     esp,20              ; Make room for selector data on stack
-        mov     ecx,esp             ; ECX := selector data structure
-        mov     bx,[selector]       ; Fill out the data structure
-        and     bx,0FFF8h           ; Kick out the LDT/GDT and DPL bits     
-        mov     [WORD ecx],bx
-        mov     ebx,[limit]
-        mov     [DWORD ecx+4],ebx
-        mov     ebx,5               ; Set GDT selector limit function code      
-ifdef   USE_NASM
-        call far dword [_PM_ioentry]
-else
-        call    [FWORD _PM_ioentry]
-endif
-        add     esp,20
-        leave_c
-        ret
-
-cprocend    
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_getCx86
-
-        ARG     reg:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        in      al,23h
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_setCx86
-
-        ARG     reg:UCHAR, val:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        mov     al,[val]
-        out     23h,al
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_disableInt
-
-; Do nothing!
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_restoreInt
-
-; Do nothing!
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void DebugInt(void)
-;----------------------------------------------------------------------------
-cprocstart  DebugInt
-
-        int     3
-        ret
-
-cprocend
-
-endcodeseg  _pmos2
-
-        END                         ; End of module
-        
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c
deleted file mode 100644
index 7de400d067..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  OS/2
-*
-* Description:  OS/2 specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: This should be implemented for OS/2!
-****************************************************************************/
-#define SetMaxThreadPriority()  0
-
-/****************************************************************************
-REMARKS:
-TODO: This should be implemented for OS/2!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    freq->low = 100000;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                                                       \
-{                                                                           \
-    ULONG   count;                                                          \
-    DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) );   \
-    (t)->low = count * 100;                                                 \
-    (t)->high = 0;                                                          \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj b/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj
deleted file mode 100644
index 5533346410..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj
+++ /dev/null
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/event.c b/board/MAI/bios_emulator/scitech/src/pm/os2/event.c
deleted file mode 100644
index 91cc19b915..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/event.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  IBM PC (OS/2)
-*
-* Description:  OS/2 implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-/* Define generous keyboard monitor circular buffer size to minimize
- * the danger of losing keystrokes
- */
-#define KEYBUFSIZE  (EVENTQSIZE + 10)
-
-static int      oldMouseState;          /* Old mouse state               */
-static ulong    oldKeyMessage;          /* Old keyboard state            */
-static ushort   keyUpMsg[256] = {0};    /* Table of key up messages      */
-static int      rangeX,rangeY;          /* Range of mouse coordinates    */
-HMOU            _EVT_hMouse;            /* Handle to the mouse driver    */
-HMONITOR        _EVT_hKbdMon;           /* Handle to the keyboard driver */
-TID             kbdMonTID = 0;          /* Keyboard monitor thread ID    */
-HEV             hevStart;               /* Start event semaphore handle  */
-BOOL            bMonRunning;            /* Flag set if monitor thread OK */
-HMTX            hmtxKeyBuf;             /* Mutex protecting key buffer   */
-KEYPACKET       keyMonPkts[KEYBUFSIZE]; /* Array of monitor key packets  */
-int             kpHead = 0;             /* Key packet buffer head        */
-int             kpTail = 0;             /* Key packet buffer tail        */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under OS/2 */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    ULONG   count;
-    DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) );
-    return count;
-}
-
-/****************************************************************************
-REMARKS:
-Converts a mickey movement value to a pixel adjustment value.
-****************************************************************************/
-static int MickeyToPixel(
-    int mickey)
-{
-    /* TODO: We can add some code in here to handle 'acceleration' for */
-    /*       the mouse cursor. For now just use the mickeys. */
-    return mickey;
-}
-
-/* Some useful defines any typedefs used in the keyboard handling */
-#define KEY_RELEASE             0x40
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from OS/2 into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    KBDINFO         keyInfo;        /* Must not cross a 64K boundary */
-    KBDKEYINFO      key;            /* Must not cross a 64K boundary */
-    MOUQUEINFO      mqueue;         /* Must not cross a 64K boundary */
-    MOUEVENTINFO    mouse;          /* Must not cross a 64K boundary */
-    ushort          mWait;          /* Must not cross a 64K boundary */
-    KEYPACKET       kp;             /* Must not cross a 64K boundary */
-    event_t         evt;
-    int             scan;
-    ibool           noInput = TRUE; /* Flag to determine if any input was available */
-
-    /* First of all, check if we should do any session switch work */
-    __PM_checkConsoleSwitch();
-
-    /* Pump all keyboard messages from our circular buffer */
-    for (;;) {
-	/* Check that the monitor thread is still running */
-	if (!bMonRunning)
-	    PM_fatalError("Keyboard monitor thread died!");
-
-	/* Protect keypacket buffer with mutex */
-	DosRequestMutexSem(hmtxKeyBuf, SEM_INDEFINITE_WAIT);
-	if (kpHead == kpTail) {
-	    DosReleaseMutexSem(hmtxKeyBuf);
-	    break;
-	    }
-
-	noInput = FALSE;
-
-	/* Read packet from circular buffer and remove it */
-	memcpy(&kp, &keyMonPkts[kpTail], sizeof(KEYPACKET));
-	if (++kpTail == KEYBUFSIZE)
-	    kpTail = 0;
-	DosReleaseMutexSem(hmtxKeyBuf);
-
-	/* Compensate for the 0xE0 character */
-	if (kp.XlatedScan && kp.XlatedChar == 0xE0)
-	    kp.XlatedChar = 0;
-
-	/* Determine type of keyboard event */
-	memset(&evt,0,sizeof(evt));
-	if (kp.KbdDDFlagWord & KEY_RELEASE)
-	    evt.what = EVT_KEYUP;
-	else
-	    evt.what = EVT_KEYDOWN;
-
-	/* Convert keyboard codes */
-	scan = kp.MonFlagWord >> 8;
-	if (evt.what == EVT_KEYUP) {
-	    /* Get message for keyup code from table of cached down values */
-	    evt.message = keyUpMsg[scan];
-	    keyUpMsg[scan] = 0;
-	    oldKeyMessage = -1;
-	    }
-	else {
-	    evt.message = ((ulong)scan << 8) | kp.XlatedChar;
-	    if (evt.message == keyUpMsg[scan]) {
-		evt.what = EVT_KEYREPEAT;
-		evt.message |= 0x10000;
-		}
-	    oldKeyMessage = evt.message & 0x0FFFF;
-	    keyUpMsg[scan] = (ushort)evt.message;
-	    }
-
-	 /* Convert shift state modifiers */
-	 if (kp.u.ShiftState & 0x0001)
-	     evt.modifiers |= EVT_RIGHTSHIFT;
-	 if (kp.u.ShiftState & 0x0002)
-	     evt.modifiers |= EVT_LEFTSHIFT;
-	 if (kp.u.ShiftState & 0x0100)
-	     evt.modifiers |= EVT_LEFTCTRL;
-	 if (kp.u.ShiftState & 0x0200)
-	     evt.modifiers |= EVT_LEFTALT;
-	 if (kp.u.ShiftState & 0x0400)
-	     evt.modifiers |= EVT_RIGHTCTRL;
-	 if (kp.u.ShiftState & 0x0800)
-	     evt.modifiers |= EVT_RIGHTALT;
-	 EVT.oldMove = -1;
-
-	 /* Add time stamp and add the event to the queue */
-	 evt.when = key.time;
-	 if (EVT.count < EVENTQSIZE)
-	     addEvent(&evt);
-	 }
-
-    /* Don't just flush because that terminally confuses the monitor */
-    do {
-	KbdCharIn(&key, IO_NOWAIT, 0);
-	} while (key.fbStatus & KBDTRF_FINAL_CHAR_IN);
-
-    /* Pump all mouse messages */
-    KbdGetStatus(&keyInfo,0);
-    /* Check return code - mouse may not be operational!! */
-    if (MouGetNumQueEl(&mqueue,_EVT_hMouse) == NO_ERROR) {
-	while (mqueue.cEvents) {
-	    while (mqueue.cEvents--) {
-		memset(&evt,0,sizeof(evt));
-		mWait = MOU_NOWAIT;
-		MouReadEventQue(&mouse,&mWait,_EVT_hMouse);
-
-		/* Update the mouse position. We get the mouse coordinates
-		 * in mickeys so we have to translate these into pixels and
-		 * move our mouse position. If we don't do this, OS/2 gives
-		 * us the coordinates in character positions since it still
-		 * thinks we are in text mode!
-		 */
-		EVT.mx += MickeyToPixel(mouse.col);
-		EVT.my += MickeyToPixel(mouse.row);
-		if (EVT.mx < 0) EVT.mx = 0;
-		if (EVT.my < 0) EVT.my = 0;
-		if (EVT.mx > rangeX)    EVT.mx = rangeX;
-		if (EVT.my > rangeY)    EVT.my = rangeY;
-		evt.where_x = EVT.mx;
-		evt.where_y = EVT.my;
-		evt.relative_x = mouse.col;
-		evt.relative_y = mouse.row;
-		evt.when = key.time;
-		if (mouse.fs & (MOUSE_BN1_DOWN | MOUSE_MOTION_WITH_BN1_DOWN))
-		    evt.modifiers |= EVT_LEFTBUT;
-		if (mouse.fs & (MOUSE_BN2_DOWN | MOUSE_MOTION_WITH_BN2_DOWN))
-		    evt.modifiers |= EVT_RIGHTBUT;
-		if (mouse.fs & (MOUSE_BN3_DOWN | MOUSE_MOTION_WITH_BN3_DOWN))
-		    evt.modifiers |= EVT_MIDDLEBUT;
-		if (keyInfo.fsState & 0x0001)
-		    evt.modifiers |= EVT_RIGHTSHIFT;
-		if (keyInfo.fsState & 0x0002)
-		    evt.modifiers |= EVT_LEFTSHIFT;
-		if (keyInfo.fsState & 0x0100)
-		    evt.modifiers |= EVT_LEFTCTRL;
-		if (keyInfo.fsState & 0x0200)
-		    evt.modifiers |= EVT_LEFTALT;
-		if (keyInfo.fsState & 0x0400)
-		    evt.modifiers |= EVT_RIGHTCTRL;
-		if (keyInfo.fsState & 0x0800)
-		    evt.modifiers |= EVT_RIGHTALT;
-
-		/* Check for left mouse click events */
-		/* 0x06 == (MOUSE_BN1_DOWN | MOUSE_MOTION_WITH_BN1_DOWN) */
-		if (((mouse.fs & 0x0006) && !(oldMouseState & 0x0006))
-			|| (!(mouse.fs & 0x0006) && (oldMouseState & 0x0006))) {
-		    if (mouse.fs & 0x0006)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_LEFTBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Check for right mouse click events */
-		/* 0x0018 == (MOUSE_BN2_DOWN | MOUSE_MOTION_WITH_BN2_DOWN) */
-		if (((mouse.fs & 0x0018) && !(oldMouseState & 0x0018))
-			|| (!(mouse.fs & 0x0018) && (oldMouseState & 0x0018))) {
-		    if (mouse.fs & 0x0018)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_RIGHTBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Check for middle mouse click events */
-		/* 0x0060 == (MOUSE_BN3_DOWN | MOUSE_MOTION_WITH_BN3_DOWN) */
-		if (((mouse.fs & 0x0060) && !(oldMouseState & 0x0060))
-			|| (!(mouse.fs & 0x0060) && (oldMouseState & 0x0060))) {
-		    if (mouse.fs & 0x0060)
-			evt.what = EVT_MOUSEDOWN;
-		    else
-			evt.what = EVT_MOUSEUP;
-		    evt.message = EVT_MIDDLEBMASK;
-		    EVT.oldMove = -1;
-		    if (EVT.count < EVENTQSIZE)
-			addEvent(&evt);
-		    }
-
-		/* Check for mouse movement event */
-		if (mouse.fs & 0x002B) {
-		    evt.what = EVT_MOUSEMOVE;
-		    if (EVT.oldMove != -1) {
-			EVT.evtq[EVT.oldMove].where_x = evt.where_x;/* Modify existing one  */
-			EVT.evtq[EVT.oldMove].where_y = evt.where_y;
-			}
-		    else {
-			EVT.oldMove = EVT.freeHead; /* Save id of this move event   */
-			if (EVT.count < EVENTQSIZE)
-			    addEvent(&evt);
-			}
-		    }
-
-		/* Save current mouse state */
-		oldMouseState = mouse.fs;
-		}
-	    MouGetNumQueEl(&mqueue,_EVT_hMouse);
-	    }
-	    noInput = FALSE;
-	}
-
-    /* If there was no input available, give up the current timeslice
-     * Note: DosSleep(0) will effectively do nothing if no other thread is ready. Hence
-     * DosSleep(0) will still use 100% CPU _but_ should not interfere with other programs.
-     */
-    if (noInput)
-	DosSleep(0);
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Keyboard monitor thread. Needed to catch both keyup and keydown events.
-****************************************************************************/
-static void _kbdMonThread(
-    void *params)
-{
-    APIRET       rc;
-    KEYPACKET    kp;
-    USHORT       count = sizeof(KEYPACKET);
-    MONBUF       monInbuf;
-    MONBUF       monOutbuf;
-    int          kpNew;
-
-    /* Raise thread priority for higher responsiveness */
-    DosSetPriority(PRTYS_THREAD, PRTYC_TIMECRITICAL, 0, 0);
-    monInbuf.cb  = sizeof(monInbuf) - sizeof(monInbuf.cb);
-    monOutbuf.cb = sizeof(monOutbuf) - sizeof(monOutbuf.cb);
-    bMonRunning = FALSE;
-
-    /* Register the buffers to be used for monitoring for current session */
-    if (DosMonReg(_EVT_hKbdMon, &monInbuf, (ULONG*)&monOutbuf,MONITOR_END, -1)) {
-	DosPostEventSem(hevStart);  /* unblock the main thread */
-	return;
-	}
-
-    /* Unblock the main thread and tell it we're OK*/
-    bMonRunning = TRUE;
-    DosPostEventSem(hevStart);
-    while (bMonRunning) {  /* Start an endless loop */
-	/* Read data from keyboard driver */
-	rc = DosMonRead((PBYTE)&monInbuf, IO_WAIT, (PBYTE)&kp, (PUSHORT)&count);
-	if (rc) {
-#ifdef CHECKED
-	    if (bMonRunning)
-		printf("Error in DosMonRead, rc = %ld\n", rc);
-#endif
-	    bMonRunning = FALSE;
-	    return;
-	    }
-
-	/* Pass FLUSH packets immediately */
-	if (kp.MonFlagWord & 4) {
-#ifdef CHECKED
-	    printf("Flush packet!\n");
-#endif
-	    DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
-	    continue;
-	    }
-
-	/*TODO: to be removed */
-	/* Skip extended scancodes & some others */
-	if (((kp.MonFlagWord >> 8) == 0xE0) || ((kp.KbdDDFlagWord & 0x0F) == 0x0F)) {
-	    DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
-	    continue;
-	    }
-
-/*      printf("RawScan = %X, XlatedScan = %X, fbStatus = %X, KbdDDFlags = %X\n", */
-/*          kp.MonFlagWord >> 8, kp.XlatedScan, kp.u.ShiftState, kp.KbdDDFlagWord); */
-
-	/* Protect access to buffer with mutex semaphore */
-	rc = DosRequestMutexSem(hmtxKeyBuf, 1000);
-	if (rc) {
-#ifdef CHECKED
-	    printf("Can't get access to mutex, rc = %ld\n", rc);
-#endif
-	    bMonRunning = FALSE;
-	    return;
-	    }
-
-	/* Store packet in circular buffer, drop it if it's full */
-	kpNew = kpHead + 1;
-	if (kpNew == KEYBUFSIZE)
-	    kpNew = 0;
-	if (kpNew != kpTail) {
-	    memcpy(&keyMonPkts[kpHead], &kp, sizeof(KEYPACKET));
-	    /* TODO: fix this! */
-	    /* Convert break to make code */
-	    keyMonPkts[kpHead].MonFlagWord &= 0x7FFF;
-	    kpHead = kpNew;
-	    }
-	DosReleaseMutexSem(hmtxKeyBuf);
-
-	/* Finally write the packet */
-	rc = DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
-	if (rc) {
-#ifdef CHECKED
-	    if (bMonRunning)
-		printf("Error in DosMonWrite, rc = %ld\n", rc);
-#endif
-	    bMonRunning = FALSE;
-	    return;
-	    }
-	}
-    (void)params;
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
-    int signal)
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    ushort  stat;
-
-    /* Initialise the event queue */
-    PM_init();
-    EVT.mouseMove = mouseMove;
-    initEventQueue();
-    oldMouseState = 0;
-    oldKeyMessage = 0;
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* Open the mouse driver, and set it up to report events in mickeys */
-    MouOpen(NULL,&_EVT_hMouse);
-    stat = 0x7F;
-    MouSetEventMask(&stat,_EVT_hMouse);
-    stat = (MOU_NODRAW | MOU_MICKEYS) << 8;
-    MouSetDevStatus(&stat,_EVT_hMouse);
-
-    /* Open the keyboard monitor  */
-    if (DosMonOpen((PSZ)"KBD$", &_EVT_hKbdMon))
-	PM_fatalError("Unable to open keyboard monitor!");
-
-    /* Create event semaphore, the monitor will post it when it's initalized */
-    if (DosCreateEventSem(NULL, &hevStart, 0, FALSE))
-	PM_fatalError("Unable to create event semaphore!");
-
-    /* Create mutex semaphore protecting the keypacket buffer */
-    if (DosCreateMutexSem(NULL, &hmtxKeyBuf, 0, FALSE))
-	PM_fatalError("Unable to create mutex semaphore!");
-
-    /* Start keyboard monitor thread, use 32K stack */
-    kbdMonTID = _beginthread(_kbdMonThread, NULL, 0x8000, NULL);
-
-    /* Now block until the monitor thread is up and running */
-    /* Give the thread one second */
-    DosWaitEventSem(hevStart, 1000);
-    if (!bMonRunning) {  /* Check the thread is OK */
-	DosMonClose(_EVT_hKbdMon);
-	PM_fatalError("Keyboard monitor thread didn't initialize!");
-	}
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    APIRET   rc;
-
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-    /* Close the mouse driver */
-    MouClose(_EVT_hMouse);
-
-    /* Stop the keyboard monitor thread and close the monitor */
-    bMonRunning = FALSE;
-    rc = DosKillThread(kbdMonTID);
-#ifdef CHECKED
-    if (rc)
-	printf("DosKillThread failed, rc = %ld\n", rc);
-#endif
-    rc = DosMonClose(_EVT_hKbdMon);
-#ifdef CHECKED
-    if (rc) {
-	printf("DosMonClose failed, rc = %ld\n", rc);
-	}
-#endif
-    DosCloseEventSem(hevStart);
-    DosCloseMutexSem(hmtxKeyBuf);
-    KbdFlushBuffer(0);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h b/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h
deleted file mode 100644
index 28d39fba4b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2
-*
-* Description:  Include file to include all OS/2 keyboard monitor stuff.
-*
-****************************************************************************/
-
-/* Monitors stuff */
-
-#define MONITOR_DEFAULT 0x0000
-#define MONITOR_BEGIN        1
-#define MONITOR_END          2
-
-typedef SHANDLE   HMONITOR;
-typedef HMONITOR *PHMONITOR;
-
-typedef struct _KEYPACKET {
-  USHORT  MonFlagWord;
-  UCHAR   XlatedChar;
-  UCHAR   XlatedScan;
-  UCHAR   DBCSStatus;
-  UCHAR   DBCSShift;
-
-  union
-  {
-    USHORT  ShiftState;
-    USHORT  LayerIndex;
-  } u;
-
-  ULONG   Milliseconds;
-  USHORT  KbdDDFlagWord;
-} KEYPACKET;
-
-typedef struct _MLNPACKET {
-  USHORT  MonFlagWord;
-  USHORT  IOCTL;
-  USHORT  CPId;
-  USHORT  CPIndex;
-  ULONG   Reserved;
-  USHORT  KbdDDFlagWord;
-} MLNPACKET;
-
-/* DBCSStatus */
-
-#define SF_SHIFTS              1  /* If set to 1, shift status returned without a character */
-#define SF_NOTCHAR             2  /* 0 - Scan code is a character */
-				  /* 1 - Scan code is not a character; */
-				  /*     instead it is an extended key code from the keyboard. */
-#define SF_IMMEDIATE          32  /* If set to 1, immediate conversion requested */
-#define SF_TYPEMASK          192  /* Has the following values: */
-				  /* 00 - Undefined */
-				  /* 01 - Final character; interim character flag is turned off */
-				  /* 10 - Interim character */
-				  /* 11 - Final character; interim character flag is turned on. */
-/* MonFlagWord */
-
-#define MF_OPEN                1  /* open */
-#define MF_CLOSE               2  /* close */
-#define MF_FLUSH               4  /* is flush packet */
-
-/* KbdDDFlagWord */
-
-#define KF_NOTSQPACKET      1024  /* Don't put this packet in SQ buffer */
-#define KF_ACCENTEDKEY       512  /* Key was translated using previous accent. */
-#define KF_MULTIMAKE         256  /* Key was repeated make of a toggle key. */
-#define KF_SECONDARYKEY      128  /* Previous scan code was the E0 prefix code. */
-#define KF_KEYBREAK           64  /* This is the break of the key. */
-#define KF_KEYTYPEMASK        63  /* Isolates the Key Type field of DDFlags. */
-#define KF_UNDEFKEY           63  /* Key packet is undefined */
-#define KF_SYSREQKEY          23  /* This key packet is the SysReq key (4990) */
-#define KF_PRINTFLUSHKEY      22  /* This packet is Ct-Alt-PrtScr */
-#define KF_PSPRINTECHOKEY     21  /* This packet is Ctl-P */
-#define KF_PRINTECHOKEY       20  /* This packet is Ctl-PrtScr */
-#define KF_PRTSCRKEY          19  /* This packet is PrtScr */
-#define KF_PSBREAKKEY         18  /* This packet is Ctl-C */
-#define KF_BREAKKEY           17  /* This packet is Ctl-Break */
-#define KF_ACCENTKEY          16  /* This packet is an accent key */
-#define KF_XRORPNOT           13  /* This packet is a Read or Peek Notification Pct. */
-#define KF_MLNOTIFICATION     14  /* packet is a Multi-Layer NLS packet */
-#define KF_HOTKEYPACKET       12  /* This packet is the hot key. */
-#define KF_BADKEYCOMBO        11  /* Accent/char combo undefined, beep only. */
-#define KF_WAKEUPKEY          10  /* This packet is one following PAUSEKEY */
-#define KF_PSPAUSEKEY          9  /* This packet is Ctl-S */
-#define KF_PAUSEKEY            8  /* This packet is Ctl-Numlock or PAUSE */
-#define KF_SHIFTMASK           7  /* Key is a shift Key */
-#define KF_DUMPKEY             6  /* This packet is Ctl-Numlock-NumLock */
-#define KF_REBOOTKEY           5  /* This packet is Ctl-Alt-Del */
-#define KF_RESENDCODE          4  /* This packet is resend code from controller */
-#define KF_OVERRUNCODE         3  /* This packet is overrun code from controller */
-#define KF_SECPREFIXCODE       2  /* This packet is E0/E1 scan code */
-#define KF_ACKCODE             1  /* This packet is ack code from keyboard */
-
-
-typedef struct _MONBUF {
-  USHORT    cb;
-  KEYPACKET Buffer;
-  BYTE      Reserved[20];
-} MONBUF;
-
-#define RS_SYSREG      32768  /* Bit 15  SysReq key down */
-#define RS_CAPSLOCK    16384  /* Bit 14  Caps Lock key down */
-#define RS_NUMLOCK      8192  /* Bit 13  NumLock key down */
-#define RS_SCROLLLOCK   4096  /* Bit 12  Scroll Lock key down */
-#define RS_RALT         2048  /* Bit 11  Right Alt key down */
-#define RS_RCONTROL     1024  /* Bit 10  Right Ctrl key down */
-#define RS_LALT          512  /* Bit  9  Left Alt key down */
-#define RS_LCONTROL      256  /* Bit  8  Left Ctrl key down */
-#define RS_INSERT        128  /* Bit  7  Insert on */
-#define RS_CAPS           64  /* Bit  6  Caps Lock on */
-#define RS_NUM            32  /* Bit  5  NumLock on */
-#define RS_SCROLL         16  /* Bit  4  Scroll Lock on */
-#define RS_ALT             8  /* Bit  3  Either Alt key down */
-#define RS_CONTROL         4  /* Bit  2  Either Ctrl key down */
-#define RS_LSHIFT          2  /* Bit  1  Left Shift key down */
-#define RS_RSHIFT          1  /* Bit  0  Right Shift key down */
-
-
-#define CS_RCONTROL     91    /* Right Control */
-#define CS_LSHIFT       42    /* Left Shift */
-#define CS_RSHIFT       54    /* Right Shift */
-#define CS_LALT         56    /* Left Alt */
-#define CS_RALT         94    /* Right Alt */
-
-
-/* DosMon* prototypes */
-#ifdef __EMX__
-    #define  APIRET16        USHORT
-    #define  APIENTRY16
-#else
-    #define  DosMonOpen      DOS16MONOPEN
-    #define  DosMonClose     DOS16MONCLOSE
-    #define  DosMonReg       DOS16MONREG
-    #define  DosMonRead      DOS16MONREAD
-    #define  DosMonWrite     DOS16MONWRITE
-    #define  DosGetInfoSeg   DOS16GETINFOSEG
-#endif
-
-APIRET16 APIENTRY16 DosMonOpen   (PSZ pszDevName, PHMONITOR phmon);
-APIRET16 APIENTRY16 DosMonClose  (HMONITOR hmon);
-APIRET16 APIENTRY16 DosMonReg    (HMONITOR hmon, MONBUF *pbInBuf, /*MONBUF*/ULONG *pbOutBuf, USHORT fPosition, USHORT usIndex);
-APIRET16 APIENTRY16 DosMonRead   (PBYTE pbInBuf, USHORT fWait, PBYTE pbDataBuf, PUSHORT pcbData);
-APIRET16 APIENTRY16 DosMonWrite  (PBYTE pbOutBuf, PBYTE pbDataBuf, USHORT cbData);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h
deleted file mode 100644
index e7aa1c6764..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define INCL_DOSPROFILE
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-#include <process.h>
-#include "os2/mon.h"
-
-void __PM_checkConsoleSwitch(void);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c b/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c
deleted file mode 100644
index 756eead1dd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c
+++ /dev/null
@@ -1,2008 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "pm_help.h"
-#include "mtrr.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <process.h>
-#ifndef __EMX__
-#include <direct.h>
-#endif
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/* Semaphore for communication with our background daemon */
-#define SHAREDSEM   ((PSZ)"\\SEM32\\SDD\\DAEMON")
-#define DAEMON_NAME "SDDDAEMN.EXE"
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* Public structures used to communicate with VIDEOPMI for implementing
- * the ability to call the real mode BIOS functions.
- */
-
-typedef struct _VIDEOMODEINFO {
-    ULONG   miModeId;
-    USHORT  usType;
-    USHORT  usInt10ModeSet;
-    USHORT  usXResolution;
-    USHORT  usYResolution;
-    ULONG   ulBufferAddress;
-    ULONG   ulApertureSize;
-    BYTE    bBitsPerPixel;
-    BYTE    bBitPlanes;
-    BYTE    bXCharSize;
-    BYTE    bYCharSize;
-    USHORT  usBytesPerScanLine;
-    USHORT  usTextRows;
-    ULONG   ulPageLength;
-    ULONG   ulSaveSize;
-    BYTE    bVrtRefresh;
-    BYTE    bHrtRefresh;
-    BYTE    bVrtPolPos;
-    BYTE    bHrtPolPos;
-    CHAR    bRedMaskSize;
-    CHAR    bRedFieldPosition;
-    CHAR    bGreenMaskSize;
-    CHAR    bGreenFieldPosition;
-    CHAR    bBlueMaskSize;
-    CHAR    bBlueFieldPosition;
-    CHAR    bRsvdMaskSize;
-    CHAR    bRsvdFieldPosition;
-    ULONG   ulColors;
-    ULONG   ulReserved[3];
-    } VIDEOMODEINFO, FAR *PVIDEOMODEINFO;
-
-typedef struct _ADAPTERINFO {
-    ULONG       ulAdapterID;
-    CHAR        szOEMString[128];
-    CHAR        szDACString[128];
-    CHAR        szRevision[128];
-    ULONG       ulTotalMemory;
-    ULONG       ulMMIOBaseAddress;
-    ULONG       ulPIOBaseAddress;
-    BYTE        bBusType;
-    BYTE        bEndian;
-    USHORT      usDeviceBusID;
-    USHORT      usVendorBusID;
-    USHORT      SlotID;
-    } ADAPTERINFO, FAR *PADAPTERINFO;
-
-typedef struct _VIDEO_ADAPTER {
-    void            *hvideo;
-    ADAPTERINFO     Adapter;
-    VIDEOMODEINFO   ModeInfo;
-    } VIDEO_ADAPTER, FAR *PVIDEO_ADAPTER;
-
-/* PMIREQUEST_SOFTWAREINT structures from OS/2 DDK */
-
-typedef struct {
-    ULONG ulFlags;                              /* VDM initialization type */
-#define VDM_POSTLOAD                    0x1     /* adapter just loaded, used internally for initialization */
-#define VDM_INITIALIZE                  0x2     /* force initialization of a permanently open VDM, even if previously initialized */
-#define VDM_TERMINATE_POSTINITIALIZE    0x6     /*start VDM with initialization, but close it afterwards (includes VDM_INITIALIZE) */
-#define VDM_QUERY_CAPABILITY            0x10    /* query the current int 10 capability */
-#define VDM_FULL_VDM_CREATED            0x20    /* a full VDM is created */
-#define VDM_MINI_VDM_CREATED            0x40    /* a mini VDM is created */
-#define VDM_MINI_VDM_SUPPORTED          0x80    /* mini VDM support is available */
-    PCHAR szName;                               /* VDM initialization program */
-    PCHAR szArgs;                               /* VDM initialization arguments */
-    }INITVDM;
-
-typedef struct {
-    BYTE bBufferType;
-#define BUFFER_NONE     0
-#define INPUT_BUFFER    1
-#define OUTPUT_BUFFER   2
-    BYTE bReserved;
-    BYTE bSelCRF;
-    BYTE bOffCRF;
-    PVOID pAddress;
-    ULONG ulSize;
-    } BUFFER, *PBUFFER;
-
-typedef struct vcrf_s {
-    ULONG reg_eax;
-    ULONG reg_ebx;
-    ULONG reg_ecx;
-    ULONG reg_edx;
-    ULONG reg_ebp;
-    ULONG reg_esi;
-    ULONG reg_edi;
-    ULONG reg_ds;
-    ULONG reg_es;
-    ULONG reg_fs;
-    ULONG reg_gs;
-    ULONG reg_cs;
-    ULONG reg_eip;
-    ULONG reg_eflag;
-    ULONG reg_ss;
-    ULONG reg_esp;
-    } VCRF;
-
-typedef struct {
-    ULONG   ulBIOSIntNo;
-    VCRF    aCRF;
-    BUFFER  pB[2];
-    } INTCRF;
-
-#define PMIREQUEST_LOADPMIFILE          21
-#define PMIREQUEST_IDENTIFYADAPTER      22
-#define PMIREQUEST_SOFTWAREINT          23
-
-#ifdef  PTR_DECL_IN_FRONT
-#define EXPENTRYP   * EXPENTRY
-#else
-#define EXPENTRYP   EXPENTRY *
-#endif
-
-/* Entry point to VIDEOPMI32Request. This may be overridden by external
- * code that has already loaded VIDEOPMI to avoid loading it twice.
- */
-
-APIRET (EXPENTRYP PM_VIDEOPMI32Request)(PVIDEO_ADAPTER, ULONG, PVOID, PVOID) = NULL;
-static ibool        haveInt10 = -1; /* True if we have Int 10 support   */
-static ibool        useVPMI = true; /* False if VIDEOPMI unavailable    */
-static VIDEO_ADAPTER Adapter;       /* Video adapter for VIDEOPMI       */
-static uchar        RMBuf[1024];    /* Fake real mode transfer buffer   */
-static uint         VESABuf_len = 1024;/* Length of the VESABuf buffer  */
-static void         *VESABuf_ptr = NULL;/* Near pointer to VESABuf      */
-static uint         VESABuf_rseg;   /* Real mode segment of VESABuf     */
-static uint         VESABuf_roff;   /* Real mode offset of VESABuf      */
-static uchar *      lowMem = NULL;
-static ibool        isSessionSwitching = false;
-static ulong        parmsIn[4];     /* Must not cross 64Kb boundary!    */
-static ulong        parmsOut[4];    /* Must not cross 64Kb boundary!    */
-extern ushort       _PM_gdt;
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/* DosSysCtl prototype. It is not declared in the headers but it is in the
- * standard import libraries (DOSCALLS.876). Funny.
- */
-APIRET APIENTRY DosSysCtl(ULONG ulFunction, PVOID pvData);
-
-/* This is the stack size for the threads that track the session switch event */
-#define SESSION_SWITCH_STACK_SIZE   32768
-
-typedef struct {
-    VIOMODEINFO     vmi;
-    USHORT          CursorX;
-    USHORT          CursorY;
-    UCHAR           FrameBuffer[1];
-    } CONSOLE_SAVE;
-
-typedef struct _SESWITCHREC {
-    /* The following variable is volatile because of PM_SUSPEND_APP         */
-    volatile int    Flags;          /* -1 or PM_DEACTIVATE or PM_REACTIVATE */
-    PM_saveState_cb Callback;       /* Save/restore context callback        */
-    HMTX            Mutex;          /* Exclusive access mutex               */
-    HEV             Event;          /* Posted after callback is called      */
-    } SESWITCHREC;
-
-/* Page sized block cache */
-
-#define PAGES_PER_BLOCK     32
-#define PAGE_BLOCK_SIZE     (PAGES_PER_BLOCK * PM_PAGE_SIZE + (PM_PAGE_SIZE-1) + sizeof(pageblock))
-#define FREELIST_NEXT(p)    (*(void**)(p))
-typedef struct pageblock {
-    struct pageblock    *next;
-    struct pageblock    *prev;
-    void                *freeListStart;
-    void                *freeList;
-    void                *freeListEnd;
-    int                 freeCount;
-    PM_lockHandle       lockHandle;
-    } pageblock;
-
-static pageblock    *pageBlocks = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-func        - Helper device driver function to call
-
-RETURNS:
-First return value from the device driver in parmsOut[0]
-
-REMARKS:
-Function to open our helper device driver, call it and close the file
-handle. Note that we have to open the device driver for every call because
-of two problems:
-
- 1. We cannot open a single file handle in a DLL that is shared amongst
-    programs, since every process must have it's own open file handle.
-
- 2. For some reason there appears to be a limit of about 12 open file
-    handles on a device driver in the system. Hence when we open more
-    than about 12 file handles things start to go very strange.
-
-Hence we simply open the file handle every time that we need to call the
-device driver to work around these problems.
-****************************************************************************/
-static ulong CallSDDHelp(
-    int func)
-{
-    static ulong    inLen;          /* Must not cross 64Kb boundary!    */
-    static ulong    outLen;         /* Must not cross 64Kb boundary!    */
-    HFILE           hSDDHelp;
-    ULONG           rc;
-    ulong           result;
-
-    if ((rc = DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
-	    FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
-	    NULL)) != 0) {
-	if (rc == 4) {  /* Did we run out of file handles? */
-	    ULONG   ulNewFHs;
-	    LONG    lAddFHs = 5;
-
-	    if (DosSetRelMaxFH(&lAddFHs, &ulNewFHs) != 0)
-		PM_fatalError("Failed to raise the file handles limit!");
-	    else {
-		if ((rc = DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
-			FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
-			NULL)) != 0) {
-		    PM_fatalError("Unable to open SDDHELP$ helper device driver! (#2)");
-		    }
-		}
-	    }
-	else
-	    PM_fatalError("Unable to open SDDHELP$ helper device driver!");
-	}
-    if (DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,func,
-	    &parmsIn, inLen = sizeof(parmsIn), &inLen,
-	    &parmsOut, outLen = sizeof(parmsOut), &outLen) != 0)
-	PM_fatalError("Failure calling SDDHELP$ helper device driver!");
-    DosClose(hSDDHelp);
-    return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Determine if we're running on a DBCS system.
-****************************************************************************/
-ibool __IsDBCSSystem(void)
-{
-    CHAR        achDBCSInfo[12];
-    COUNTRYCODE ccStruct = {0, 0};
-
-    memset(achDBCSInfo, 0, 12);
-
-    /* Get the DBCS vector - if it's not empty, we're on DBCS */
-    DosQueryDBCSEnv(sizeof(achDBCSInfo), &ccStruct, achDBCSInfo);
-    if (achDBCSInfo[0] != 0)
-	return true;
-    else
-	return false;
-}
-
-/****************************************************************************
-REMARKS:
-Determine if PMSHELL is running - if it isn't, we can't use certain calls
-****************************************************************************/
-ibool __isShellLoaded(void)
-{
-    PVOID   ptr;
-
-    if (DosGetNamedSharedMem(&ptr, (PSZ)"\\SHAREMEM\\PMGLOBAL.MEM", PAG_READ) == NO_ERROR) {
-	DosFreeMem(ptr);
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library and connect to our helper device driver. If we
-cannot connect to our helper device driver, we bail out with an error
-message.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    if (!lowMem) {
-	/* Obtain the 32->16 callgate from the device driver to enable IOPL */
-	if ((_PM_gdt = CallSDDHelp(PMHELP_GETGDT32)) == 0)
-	    PM_fatalError("Unable to obtain call gate selector!");
-
-	PM_setIOPL(3);
-
-	/* Map the first Mb of physical memory into lowMem */
-	if ((lowMem = PM_mapPhysicalAddr(0,0xFFFFF,true)) == NULL)
-	    PM_fatalError("Unable to map first Mb physical memory!");
-
-	/* Initialise the MTRR interface functions */
-	MTRR_init();
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library for BIOS access via VIDEOPMI. This should work
-with any GRADD driver, including SDD/2.
-****************************************************************************/
-static ibool InitInt10(void)
-{
-    HMODULE     hModGENPMI,hModSDDPMI,hModVideoPMI;
-    CHAR        buf[80],path[_MAX_PATH];
-    HEV         hevDaemon = NULLHANDLE;
-    RESULTCODES resCodes;
-
-    if (haveInt10 == -1) {
-	/* Connect to VIDEOPMI and get entry point. Note that we only
-	 * do this if GENPMI or SDDPMI are already loaded, since we need
-	 * a GRADD based driver for this to work.
-	 */
-	PM_init();
-	haveInt10 = false;
-	if (DosQueryModuleHandle((PSZ)"GENPMI.DLL",&hModGENPMI) != 0)
-	    hModGENPMI = NULLHANDLE;
-	if (DosQueryModuleHandle((PSZ)"SDDPMI.DLL",&hModSDDPMI) != 0)
-	    hModSDDPMI = NULLHANDLE;
-	if (hModGENPMI || hModSDDPMI) {
-	    if (DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"VIDEOPMI.DLL",&hModVideoPMI) == 0) {
-		if (DosQueryProcAddr(hModVideoPMI,0,(PSZ)"VIDEOPMI32Request",(void*)&PM_VIDEOPMI32Request) != 0)
-		    PM_fatalError("Unable to get VIDEOPMI32Request entry point!");
-		strcpy(path,"X:\\OS2\\SVGADATA.PMI");
-		path[0] = PM_getBootDrive();
-		if (PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_LOADPMIFILE,path,NULL) != 0) {
-		    DosFreeModule(hModVideoPMI);
-		    PM_VIDEOPMI32Request = NULL;
-		    haveInt10 = false;
-		    }
-		else {
-		    /* Attempt to initialise the full VDM in the system. This will only
-		     * work if VPRPMI.SYS is loaded, but it provides support for passing
-		     * values in ES/DS/ESI/EDI between the BIOS which does not work with
-		     * kernel VDM's in fixpacks earlier than FP15. FP15 and later and
-		     * the new Warp 4.51 and Warp Server convenience packs should work
-		     * fine with the kernel mini-VDM.
-		     *
-		     * Also the full VDM is the only solution for really old kernels
-		     * (but GRADD won't run on them so this is superfluous ;-).
-		     */
-		    INITVDM InitVDM = {VDM_INITIALIZE,NULL,NULL};
-		    PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&InitVDM,NULL);
-		    haveInt10 = true;
-		    }
-		}
-	    }
-	else {
-	    /* A GRADD driver isn't loaded, hence we can't use VIDEOPMI. But we will try
-	     * to access the mini-VDM directly, first verifying that the support is
-	     * available in the kernel (it should be for kernels that support GRADD).
-	     * This may be needed in a command line boot or if non-GRADD driver is
-	     * used (Matrox or classic VGA).
-	     * Note: because of problems with mini-VDM support in the kernel, we have to
-	     * spawn a daemon process that will do the actual mini-VDM access for us.
-	     */
-	     /* Try to open shared semaphore to see if our daemon is already up */
-	    if (DosOpenEventSem(SHAREDSEM, &hevDaemon) == NO_ERROR) {
-		if (DosWaitEventSem(hevDaemon, 1) == NO_ERROR) {
-		    /* If semaphore is posted, all is well */
-		    useVPMI   = false;
-		    haveInt10 = true;
-		    }
-		}
-	    else {
-		/* Create shared event semaphore */
-		if (DosCreateEventSem(SHAREDSEM, &hevDaemon, DC_SEM_SHARED, FALSE) == NO_ERROR) {
-		    PM_findBPD(DAEMON_NAME, path);
-		    strcat(path, DAEMON_NAME);
-		    if (DosExecPgm(buf, sizeof(buf), EXEC_BACKGROUND, (PSZ)DAEMON_NAME,
-			NULL, &resCodes, (PSZ)path) == NO_ERROR) {
-			/* The daemon was successfully spawned, now give it a sec to come up */
-			if (DosWaitEventSem(hevDaemon, 2000) == NO_ERROR) {
-			    /* It's up! */
-			    useVPMI   = false;
-			    haveInt10 = true;
-			    }
-			}
-		    }
-		}
-	    }
-	}
-    return haveInt10;
-}
-
-/****************************************************************************
-REMARKS:
-We "probably" have BIOS access under OS/2 but we have to verify/initialize it
-first.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
-    return InitInt10();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
-    return _OS_OS2;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
-    return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
-    char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
-    const char *msg)
-{
-    /* Be prepare to be called recursively (failed to fail situation :-) */
-    static int fatalErrorCount = 0;
-    if (fatalErrorCount++ == 0) {
-	if (fatalErrorCleanup)
-	    fatalErrorCleanup();
-	}
-    fprintf(stderr,"%s\n", msg);
-    exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
-    KBDKEYINFO   key;            /* Must not cross a 64K boundary    */
-
-    KbdPeek(&key, 0);
-    return (key.fbStatus & KBDTRF_FINAL_CHAR_IN);
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
-    KBDKEYINFO   key;            /* Must not cross a 64K boundary    */
-
-    KbdCharIn(&key,IO_WAIT,0);
-    return key.chChar;
-}
-
-/****************************************************************************
-REMARKS:
-Open a fullscreen console for output to the screen. This requires that
-the application be a fullscreen VIO program.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hwndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-    (void)hwndUser;
-    (void)device;
-    (void)xRes;
-    (void)yRes;
-    (void)bpp;
-    (void)fullScreen;
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
-    VIOMODEINFO vmi;
-    vmi.cb = sizeof (VIOMODEINFO);
-    VioGetMode (&vmi, (HVIO)0);
-    return sizeof (CONSOLE_SAVE) - 1 + vmi.col * vmi.row * 2;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
-    void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    USHORT          fblen;
-    CONSOLE_SAVE    *cs = (CONSOLE_SAVE*)stateBuf;
-    VIOMODEINFO     vmi;
-
-    /* The reason for the VIOMODEINFO juggling is 16-bit code. Because the user
-     * allocates the state buffer, cd->vmi might be crossing the 64K boundary and
-     * the 16-bit API would fail. If we create another copy on stack, the compiler
-     * should ensure that the 64K boundary will not be crossed (it adjusts the stack
-     * if it should cross).
-     */
-    vmi.cb = sizeof(VIOMODEINFO);
-    VioGetMode(&vmi,(HVIO)0);
-    memcpy(&cs->vmi, &vmi, sizeof(VIOMODEINFO));
-    VioGetCurPos(&cs->CursorY, &cs->CursorX, (HVIO)0);
-    fblen = cs->vmi.col * cs->vmi.row * 2;
-    VioReadCellStr((PCH)cs->FrameBuffer, &fblen, 0, 0, (HVIO)0);
-}
-
-/* Global variable to communicate between threads */
-static SESWITCHREC SesSwitchRec = { -1 };
-
-/****************************************************************************
-REMARKS:
-Called by external routines at least once per frame to check whenever a
-session save/restore should be performed. Since we receive such notifications
-asyncronously, we can't perform all required operations at that time.
-****************************************************************************/
-void __PM_checkConsoleSwitch(void)
-{
-    int             Flags, Mode;
-    PM_saveState_cb Callback;
-
-    /* Quick optimized path for most common case */
-    if (SesSwitchRec.Flags == -1)
-	return;
-
-again:
-    if (DosRequestMutexSem(SesSwitchRec.Mutex, 100))
-	return;
-    Flags = SesSwitchRec.Flags;
-    Callback = SesSwitchRec.Callback;
-    SesSwitchRec.Flags = -1;
-    DosReleaseMutexSem(SesSwitchRec.Mutex);
-
-    isSessionSwitching = true;            /* Prevent VIO calls */
-    Mode = Callback(Flags);
-    isSessionSwitching = false;
-    DosPostEventSem(SesSwitchRec.Event);
-    if (Flags == PM_DEACTIVATE && Mode == PM_SUSPEND_APP)
-	/* Suspend application until we switch back to our application */
-	for (;;) {
-	    DosSleep (500);
-	    /* SesSwitchRec.Flags is volatile so optimizer
-	     * won't load it into a register
-	     */
-	    if (SesSwitchRec.Flags != -1)
-		goto again;
-	    }
-}
-
-/****************************************************************************
-REMARKS:
-Waits until main thread processes the session switch event.
-****************************************************************************/
-static void _PM_SessionSwitchEvent(
-    PM_saveState_cb saveState,
-    int flags)
-{
-    ULONG Count;
-
-    if (DosRequestMutexSem(SesSwitchRec.Mutex, 10000))
-	return;
-
-    /* We're going to wait on that semaphore */
-    DosResetEventSem(SesSwitchRec.Event, &Count);
-    SesSwitchRec.Callback = saveState;
-    SesSwitchRec.Flags = flags;
-    DosReleaseMutexSem(SesSwitchRec.Mutex);
-
-    /* Now wait until all required operations are complete */
-    DosWaitEventSem (SesSwitchRec.Event, 10000);
-}
-
-/****************************************************************************
-REMARKS:
-This is the thread responsible for tracking switches back to our
-fullscreen session.
-****************************************************************************/
-static void _PM_ConsoleSwitch(
-    PM_saveState_cb saveState)
-{
-    USHORT NotifyType;
-
-    for (;;) {
-	if (VioModeWait(VMWR_POPUP, &NotifyType, 0) != 0)
-	    break;
-	_PM_SessionSwitchEvent(saveState, PM_REACTIVATE);
-	}
-    VioModeUndo(UNDOI_RELEASEOWNER, UNDOK_ERRORCODE, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-This is the thread responsible for tracking screen popups (usually fatal
-error handler uses them).
-****************************************************************************/
-static void _PM_ConsolePopup(
-    PM_saveState_cb saveState)
-{
-    USHORT NotifyType;
-    for (;;) {
-	if (VioSavRedrawWait(VSRWI_SAVEANDREDRAW, &NotifyType, 0) != 0)
-	    break;
-	if (NotifyType == VSRWN_SAVE)
-	    _PM_SessionSwitchEvent(saveState, PM_DEACTIVATE);
-	else if (NotifyType == VSRWN_REDRAW)
-	    _PM_SessionSwitchEvent(saveState, PM_REACTIVATE);
-	}
-    VioSavRedrawUndo(UNDOI_RELEASEOWNER, UNDOK_ERRORCODE, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
-    PM_saveState_cb saveState)
-{
-    /* If PM isn't loaded, this stuff will cause crashes! */
-    if (__isShellLoaded()) {
-	if (saveState) {
-	    /* Create the threads responsible for tracking console switches */
-	    SesSwitchRec.Flags = -1;
-	    DosCreateMutexSem(NULL, &SesSwitchRec.Mutex, 0, FALSE);
-	    DosCreateEventSem(NULL, &SesSwitchRec.Event, 0, FALSE);
-	    _beginthread ((void(*)(void*))_PM_ConsoleSwitch,NULL,SESSION_SWITCH_STACK_SIZE, (void*)saveState);
-	    _beginthread ((void(*)(void*))_PM_ConsolePopup,NULL,SESSION_SWITCH_STACK_SIZE, (void*)saveState);
-	    }
-	else {
-	    /* Kill the threads responsible for tracking console switches */
-	    VioModeUndo(UNDOI_RELEASEOWNER, UNDOK_TERMINATE, (HVIO)0);
-	    VioSavRedrawUndo(UNDOI_RELEASEOWNER, UNDOK_TERMINATE, (HVIO)0);
-	    DosCloseEventSem(SesSwitchRec.Event);
-	    DosCloseMutexSem(SesSwitchRec.Mutex);
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
-    const void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    CONSOLE_SAVE *cs = (CONSOLE_SAVE *)stateBuf;
-    VIOMODEINFO  vmi;
-
-    if (!cs)
-	return;
-
-    memcpy(&vmi, &cs->vmi, sizeof (VIOMODEINFO));
-    VioSetMode(&vmi, (HVIO)0);
-    VioSetCurPos(cs->CursorY, cs->CursorX, (HVIO)0);
-    VioWrtCellStr((PCH)cs->FrameBuffer, cs->vmi.col * cs->vmi.row * 2,0, 0, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
-    PM_HWND hwndConsole)
-{
-    /* Kill the threads responsible for tracking console switches */
-    PM_setSuspendAppCallback(NULL);
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    /* If session switch is in progress, calling into VIO causes deadlocks! */
-    /* Also this call to VIO screws up our console library on DBCS boxes... */
-    if (!isSessionSwitching && !__IsDBCSSystem())
-	VioSetCurPos(y,x,0);
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    /* Nothing to do in here */
-    (void)width;
-    (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
-    PM_intHandler ih,
-    int frequency)
-{
-    /* TODO: Implement this! */
-    (void)ih;
-    (void)frequency;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    /* TODO: Implement this! */
-    (void)frequency;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* TODO: Implement this! */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
-    ulong   boot = 3;
-    DosQuerySysInfo(QSV_BOOT_DRIVE,QSV_BOOT_DRIVE,&boot,sizeof(boot));
-    return (char)('a' + boot - 1);
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    static char path[CCHMAXPATH];
-    strcpy(path,"x:\\");
-    path[0] = PM_getBootDrive();
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[CCHMAXPATH];
-    if (getenv("NUCLEUS_PATH") != NULL)
-	return getenv("NUCLEUS_PATH");
-    strcpy(path,"x:\\os2\\drivers");
-    path[0] = PM_getBootDrive();
-    PM_backslash(path);
-    strcat(path,"nucleus");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[CCHMAXPATH];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
-    return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
-    static char name[40],*env;
-
-    if ((env = getenv("HOSTNAME")) != NULL) {
-	strncpy(name,env,sizeof(name));
-	name[sizeof(name)-1] = 0;
-	return name;
-	}
-    return "OS2";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
-    PM_init();
-    return lowMem + 0x400;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
-    PM_init();
-    return lowMem + 0xA0000;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    ulong   baseAddr,baseOfs,linear;
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to mmap. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    baseOfs = base & 4095;
-    baseAddr = base & ~4095;
-    limit = ((limit+baseOfs+1+4095) & ~4095)-1;
-    parmsIn[0] = baseAddr;
-    parmsIn[1] = limit;
-    parmsIn[2] = isCached;
-    if ((linear = CallSDDHelp(PMHELP_MAPPHYS)) == 0)
-	return NULL;
-    return (void*)(linear + baseOfs);
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    parmsIn[0] = (ulong)ptr;
-    parmsIn[1] = limit;
-    CallSDDHelp(PMHELP_FREEPHYS);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
-    void *p)
-{
-    parmsIn[0] = (ulong)p;
-    return CallSDDHelp(PMHELP_GETPHYSICALADDR);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    parmsIn[0] = (ulong)p;
-    parmsIn[1] = (ulong)length;
-    parmsIn[2] = (ulong)physAddress;
-    return CallSDDHelp(PMHELP_GETPHYSICALADDRRANGE);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
-    ulong milliseconds)
-{
-    DosSleep(milliseconds);
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(
-    int port)
-{
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(
-    int port)
-{
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    parmsIn[0] = size;
-    return (void*)CallSDDHelp(PMHELP_MALLOCSHARED);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
-    void *ptr)
-{
-    parmsIn[0] = (ulong)ptr;
-    CallSDDHelp(PMHELP_FREESHARED);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    ulong   baseAddr,baseOfs;
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to mmap. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    baseOfs = (ulong)base & 4095;
-    baseAddr = (ulong)base & ~4095;
-    limit = ((limit+baseOfs+1+4095) & ~4095)-1;
-    parmsIn[0] = (ulong)baseAddr;
-    parmsIn[1] = limit;
-    return (void*)(CallSDDHelp(PMHELP_MAPTOPROCESS)+baseOfs);
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    if (r_seg == 0xFFFF)
-	return &RMBuf[r_off];
-    return lowMem + MK_PHYS(r_seg,r_off);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    if (size > sizeof(RMBuf))
-	return NULL;
-    *r_seg = 0xFFFF;
-    *r_off = 0x0000;
-    return &RMBuf;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-    /* Nothing to do in here */
-    (void)mem;
-}
-
-#define INDPMI(reg)     rmregs.aCRF.reg_##reg = regs->reg
-#define OUTDPMI(reg)    regs->reg = rmregs.aCRF.reg_##reg
-
-#define REG_OFFSET(field)  (((ULONG)&(((VCRF*)0)->field))  / sizeof(ULONG))
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    INTCRF  rmregs;
-    ulong   eax = 0;
-
-    if (!InitInt10())
-	return;
-    memset(&rmregs, 0, sizeof(rmregs));
-    rmregs.ulBIOSIntNo = intno;
-    INDPMI(eax); INDPMI(ebx); INDPMI(ecx); INDPMI(edx); INDPMI(esi); INDPMI(edi);
-    rmregs.aCRF.reg_ds = regs->ds;
-    rmregs.aCRF.reg_es = regs->es;
-    if (intno == 0x10) {
-	eax = rmregs.aCRF.reg_eax;
-	switch (eax & 0xFFFF) {
-	    case 0x4F00:
-		/* We have to hack the way this function works, due to
-		 * some bugs in the IBM mini-VDM BIOS support. Specifically
-		 * we need to make the input buffer and output buffer the
-		 * 'same' buffer, and that ES:SI points to the output
-		 * buffer (ignored by the BIOS). The data will end up
-		 * being returned in the input buffer, except for the
-		 * first four bytes ('VESA') that will not be returned.
-		 */
-		rmregs.pB[0].bBufferType = INPUT_BUFFER;
-		rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
-		rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
-		rmregs.pB[0].pAddress = RMBuf;
-		rmregs.pB[0].ulSize = 4;
-		rmregs.pB[1].bBufferType = OUTPUT_BUFFER;
-		rmregs.pB[1].bSelCRF = REG_OFFSET(reg_es);
-		rmregs.pB[1].bOffCRF = REG_OFFSET(reg_esi);
-		rmregs.pB[1].pAddress = ((PBYTE)RMBuf)+4;
-		rmregs.pB[1].ulSize = 512-4;
-		break;
-	    case 0x4F01:
-		rmregs.pB[0].bBufferType = OUTPUT_BUFFER;
-		rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
-		rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
-		rmregs.pB[0].pAddress = RMBuf;
-		rmregs.pB[0].ulSize = 256;
-		break;
-	    case 0x4F02:
-		rmregs.pB[0].bBufferType = INPUT_BUFFER;
-		rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
-		rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
-		rmregs.pB[0].pAddress = RMBuf;
-		rmregs.pB[0].ulSize = 256;
-		break;
-	    case 0x4F09:
-		rmregs.pB[0].bBufferType = INPUT_BUFFER;
-		rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
-		rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
-		rmregs.pB[0].pAddress = RMBuf;
-		rmregs.pB[0].ulSize = 1024;
-		break;
-	    case 0x4F0A:
-		/* Due to bugs in the mini-VDM in OS/2, the 0x4F0A protected
-		 * mode interface functions will not work (we never get any
-		 * selectors returned), so we fail this function here. The
-		 * rest of the VBE/Core driver will work properly if this
-		 * function is failed, because the VBE 2.0 and 3.0 specs
-		 * allow for this.
-		 */
-		regs->eax = 0x014F;
-		return;
-	    }
-	}
-    if (useVPMI)
-	PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,NULL,&rmregs);
-    else {
-	DosSysCtl(6, &rmregs);
-	}
-
-    OUTDPMI(eax); OUTDPMI(ebx); OUTDPMI(ecx); OUTDPMI(edx); OUTDPMI(esi); OUTDPMI(edi);
-    if (((regs->eax & 0xFFFF) == 0x004F) && ((eax & 0xFFFF) == 0x4F00)) {
-	/* Hack to fix up the missing 'VESA' string for mini-VDM */
-	memcpy(RMBuf,"VESA",4);
-	}
-    regs->ds = rmregs.aCRF.reg_ds;
-    regs->es = rmregs.aCRF.reg_es;
-    regs->flags = rmregs.aCRF.reg_eflag;
-}
-
-#define IN(reg)     rmregs.reg = in->e.reg
-#define OUT(reg)    out->e.reg = rmregs.reg
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    DPMI_int86(intno,&rmregs);
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    rmregs.es = sregs->es;
-    rmregs.ds = sregs->ds;
-    DPMI_int86(intno,&rmregs);
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    sregs->es = rmregs.es;
-    sregs->cs = rmregs.cs;
-    sregs->ss = rmregs.ss;
-    sregs->ds = rmregs.ds;
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    PM_fatalError("PM_callRealMode not supported on OS/2!");
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    /* Unable to get reliable values from OS/2 for this */
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    parmsIn[0] = size;
-    parmsIn[1] = contiguous;
-    parmsIn[2] = below16M;
-    CallSDDHelp(PMHELP_ALLOCLOCKED);
-    *physAddr = parmsOut[1];
-    return (void*)parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    parmsIn[0] = (ulong)p;
-    CallSDDHelp(PMHELP_FREELOCKED);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a new block of pages for the page block manager.
-****************************************************************************/
-static pageblock *PM_addNewPageBlock(void)
-{
-    int         i;
-    pageblock   *newBlock;
-    char        *p,*next;
-
-    /* Allocate memory for the new page block, and add to head of list */
-    if (DosAllocSharedMem((void**)&newBlock,NULL,PAGE_BLOCK_SIZE,OBJ_GETTABLE | PAG_READ | PAG_WRITE | PAG_COMMIT))
-	return NULL;
-    if (!PM_lockDataPages(newBlock,PAGE_BLOCK_SIZE,&newBlock->lockHandle))
-	return NULL;
-    newBlock->prev = NULL;
-    newBlock->next = pageBlocks;
-    if (pageBlocks)
-	pageBlocks->prev = newBlock;
-    pageBlocks = newBlock;
-
-    /* Initialise the page aligned free list for the page block */
-    newBlock->freeCount = PAGES_PER_BLOCK;
-    newBlock->freeList = p = (char*)(((ulong)(newBlock + 1) + (PM_PAGE_SIZE-1)) & ~(PM_PAGE_SIZE-1));
-    newBlock->freeListStart = newBlock->freeList;
-    newBlock->freeListEnd = p + (PAGES_PER_BLOCK-1) * PM_PAGE_SIZE;
-    for (i = 0; i < PAGES_PER_BLOCK; i++,p = next)
-	FREELIST_NEXT(p) = next = p + PM_PAGE_SIZE;
-    FREELIST_NEXT(p - PM_PAGE_SIZE) = NULL;
-    return newBlock;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    pageblock   *block;
-    void        *p;
-
-    /* Scan the block list looking for any free blocks. Allocate a new
-     * page block if no free blocks are found.
-     */
-    for (block = pageBlocks; block != NULL; block = block->next) {
-	if (block->freeCount)
-	    break;
-	}
-    if (block == NULL && (block = PM_addNewPageBlock()) == NULL)
-	return NULL;
-    block->freeCount--;
-    p = block->freeList;
-    block->freeList = FREELIST_NEXT(p);
-    (void)locked;
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
-    void *p)
-{
-    pageblock   *block;
-
-    /* First find the page block that this page belongs to */
-    for (block = pageBlocks; block != NULL; block = block->next) {
-	if (p >= block->freeListStart && p <= block->freeListEnd)
-	    break;
-	}
-    CHECK(block != NULL);
-
-    /* Now free the block by adding it to the free list */
-    FREELIST_NEXT(p) = block->freeList;
-    block->freeList = p;
-    if (++block->freeCount == PAGES_PER_BLOCK) {
-	/* If all pages in the page block are now free, free the entire
-	 * page block itself.
-	 */
-	if (block == pageBlocks) {
-	    /* Delete from head */
-	    pageBlocks = block->next;
-	    if (block->next)
-		block->next->prev = NULL;
-	    }
-	else {
-	    /* Delete from middle of list */
-	    CHECK(block->prev != NULL);
-	    block->prev->next = block->next;
-	    if (block->next)
-		block->next->prev = block->prev;
-	    }
-
-	/* Unlock the memory and free it */
-	PM_unlockDataPages(block,PAGE_BLOCK_SIZE,&block->lockHandle);
-	DosFreeMem(block);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Map in all the shared memory blocks for managing the memory pages above.
-****************************************************************************/
-void PMAPI PM_mapSharedPages(void)
-{
-    pageblock   *block;
-
-    /* Map all the page blocks above into the shared memory for process */
-    for (block = pageBlocks; block != NULL; block = block->next) {
-	DosGetSharedMem(block, PAG_READ | PAG_WRITE);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lockHandle)
-{
-    parmsIn[0] = (ulong)p;
-    parmsIn[1] = len;
-    CallSDDHelp(PMHELP_LOCKPAGES);
-    lockHandle->h[0] = parmsOut[1];
-    lockHandle->h[1] = parmsOut[2];
-    lockHandle->h[2] = parmsOut[3];
-    return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lockHandle)
-{
-    parmsIn[0] = lockHandle->h[0];
-    parmsIn[1] = lockHandle->h[1];
-    parmsIn[2] = lockHandle->h[2];
-    return CallSDDHelp(PMHELP_UNLOCKPAGES);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lockHandle)
-{
-    parmsIn[0] = (ulong)p;
-    parmsIn[1] = len;
-    CallSDDHelp(PMHELP_LOCKPAGES);
-    lockHandle->h[0] = parmsOut[1];
-    lockHandle->h[1] = parmsOut[2];
-    lockHandle->h[2] = parmsOut[3];
-    return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lockHandle)
-{
-    parmsIn[0] = lockHandle->h[0];
-    parmsIn[1] = lockHandle->h[1];
-    parmsIn[2] = lockHandle->h[2];
-    return CallSDDHelp(PMHELP_UNLOCKPAGES);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
-    int bank)
-{
-    INTCRF  rmregs;
-
-    if (!InitInt10())
-	return;
-    memset(&rmregs, 0, sizeof(rmregs));
-    rmregs.ulBIOSIntNo = 0x10;
-    rmregs.aCRF.reg_eax = 0x4F05;
-    rmregs.aCRF.reg_ebx = 0x0000;
-    rmregs.aCRF.reg_edx = bank;
-    PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
-    int bank)
-{
-    INTCRF  rmregs;
-
-    if (!InitInt10())
-	return;
-    memset(&rmregs, 0, sizeof(rmregs));
-    rmregs.ulBIOSIntNo = 0x10;
-    rmregs.aCRF.reg_eax = 0x4F05;
-    rmregs.aCRF.reg_ebx = 0x0000;
-    rmregs.aCRF.reg_edx = bank;
-    PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-    rmregs.ulBIOSIntNo = 0x10;
-    rmregs.aCRF.reg_eax = 0x4F05;
-    rmregs.aCRF.reg_ebx = 0x0001;
-    rmregs.aCRF.reg_edx = bank;
-    PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
-    int x,
-    int y,
-    int waitVRT)
-{
-    INTCRF  rmregs;
-
-    if (!InitInt10())
-	return;
-    memset(&rmregs, 0, sizeof(rmregs));
-    rmregs.ulBIOSIntNo = 0x10;
-    rmregs.aCRF.reg_eax = 0x4F07;
-    rmregs.aCRF.reg_ebx = waitVRT;
-    rmregs.aCRF.reg_ecx = x;
-    rmregs.aCRF.reg_edx = y;
-    PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    (void)axVal;
-    (void)BIOSPhysAddr;
-    (void)mappedBIOS;
-    (void)BIOSLen;
-    return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-    return MTRR_enableWriteCombine(base,size,type);
-}
-
-/* TODO: Move the MTRR helper stuff into the call gate, or better yet */
-/*       entirely into the ring 0 helper driver!! */
-
-/* MTRR helper functions. To make it easier to implement the MTRR support
- * under OS/2, we simply put our ring 0 helper functions into the
- * helper device driver rather than the entire MTRR module. This makes
- * it easier to maintain the MTRR support since we don't need to deal
- * with 16-bit ring 0 code in the MTRR library.
- */
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
-    CallSDDHelp(PMHELP_FLUSHTLB);
-}
-
-/****************************************************************************
-REMARKS:
-Return true if ring 0 (or if we can call the helpers functions at ring 0)
-****************************************************************************/
-ibool _ASMAPI _MTRR_isRing0(void)
-{
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Read and return the value of the CR4 register
-****************************************************************************/
-ulong _ASMAPI _MTRR_saveCR4(void)
-{
-    return CallSDDHelp(PMHELP_SAVECR4);
-}
-
-/****************************************************************************
-REMARKS:
-Restore the value of the CR4 register
-****************************************************************************/
-void _ASMAPI _MTRR_restoreCR4(ulong cr4Val)
-{
-    parmsIn[0] = cr4Val;
-    CallSDDHelp(PMHELP_RESTORECR4);
-}
-
-/****************************************************************************
-REMARKS:
-Read a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_readMSR(
-    ulong reg,
-    ulong *eax,
-    ulong *edx)
-{
-    parmsIn[0] = reg;
-    CallSDDHelp(PMHELP_READMSR);
-    *eax = parmsOut[0];
-    *edx = parmsOut[1];
-}
-
-/****************************************************************************
-REMARKS:
-Write a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_writeMSR(
-    ulong reg,
-    ulong eax,
-    ulong edx)
-{
-    parmsIn[0] = reg;
-    parmsIn[1] = eax;
-    parmsIn[2] = edx;
-    CallSDDHelp(PMHELP_WRITEMSR);
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* TODO: Implement this to load shared libraries! */
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
-    PM_findData *findData,
-    FILEFINDBUF3 *blk)
-{
-    ulong   dwSize = findData->dwSize;
-
-    memset(findData,0,findData->dwSize);
-    findData->dwSize = dwSize;
-    if (blk->attrFile & FILE_READONLY)
-	findData->attrib |= PM_FILE_READONLY;
-    if (blk->attrFile & FILE_DIRECTORY)
-	findData->attrib |= PM_FILE_DIRECTORY;
-    if (blk->attrFile & FILE_ARCHIVED)
-	findData->attrib |= PM_FILE_ARCHIVE;
-    if (blk->attrFile & FILE_HIDDEN)
-	findData->attrib |= PM_FILE_HIDDEN;
-    if (blk->attrFile & FILE_SYSTEM)
-	findData->attrib |= PM_FILE_SYSTEM;
-    findData->sizeLo = blk->cbFile;
-    findData->sizeHi = 0;
-    strncpy(findData->name,blk->achName,PM_MAX_PATH);
-    findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK   (FILE_ARCHIVED | FILE_DIRECTORY | FILE_SYSTEM | FILE_HIDDEN | FILE_READONLY)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    FILEFINDBUF3    blk;
-    HDIR            hdir = HDIR_CREATE;
-    ulong           count = 1;
-
-    if (DosFindFirst((PSZ)filename,&hdir,FIND_MASK,&blk,sizeof(blk),&count,FIL_STANDARD) == NO_ERROR) {
-	convertFindData(findData,&blk);
-	return (void*)hdir;
-	}
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    FILEFINDBUF3    blk;
-    ulong           count = 1;
-
-    if (DosFindNext((HDIR)handle,&blk,sizeof(blk),&count) == NO_ERROR) {
-	convertFindData(findData,&blk);
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    DosFindClose((HDIR)handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    0   - Current drive
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    ulong   cntDisk,cntDriveMap;
-    ibool   valid;
-
-    DosQueryCurrentDisk(&cntDisk,&cntDriveMap);
-    valid = (DosSetDefaultDisk(drive) == NO_ERROR);
-    DosSetDefaultDisk(cntDisk);
-    return valid;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    ulong length = len;
-
-    DosQueryCurrentDir(drive, (PSZ)dir, &length);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    FILESTATUS3 s;
-
-    if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s)))
-	return;
-    s.attrFile = 0;
-    if (attrib & PM_FILE_READONLY)
-	s.attrFile |= FILE_READONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	s.attrFile |= FILE_ARCHIVED;
-    if (attrib & PM_FILE_HIDDEN)
-	s.attrFile |= FILE_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	s.attrFile |= FILE_SYSTEM;
-    DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s),0L);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    FILESTATUS3 fs3;
-    uint        retval = 0;
-
-    if (DosQueryPathInfo((PSZ)filename, FIL_STANDARD, &fs3, sizeof(FILESTATUS3)))
-	return 0;
-    if (fs3.attrFile & FILE_READONLY)
-	retval |= PM_FILE_READONLY;
-    if (fs3.attrFile & FILE_ARCHIVED)
-	retval |= PM_FILE_ARCHIVE;
-    if (fs3.attrFile & FILE_HIDDEN)
-	retval |= PM_FILE_HIDDEN;
-    if (fs3.attrFile & FILE_SYSTEM)
-	retval |= PM_FILE_SYSTEM;
-    return retval;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    return DosCreateDir((PSZ)filename,NULL) == NO_ERROR;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return DosDeleteDir((PSZ)filename) == NO_ERROR;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    FILESTATUS3 fs3;
-    struct tm   tc;
-    struct tm   *ret;
-    time_t      tt;
-
-    if (DosQueryPathInfo((PSZ)filename, FIL_STANDARD, &fs3, sizeof(FILESTATUS3)))
-	return false;
-    if (gmTime) {
-	tc.tm_year = fs3.fdateLastWrite.year + 80;
-	tc.tm_mon = fs3.fdateLastWrite.month - 1;
-	tc.tm_mday = fs3.fdateLastWrite.day;
-	tc.tm_hour = fs3.ftimeLastWrite.hours;
-	tc.tm_min = fs3.ftimeLastWrite.minutes;
-	tc.tm_sec = fs3.ftimeLastWrite.twosecs * 2;
-	if((tt = mktime(&tc)) == -1)
-	    return false;
-	if(!(ret = gmtime(&tt)))
-	    return false;
-	time->sec = ret->tm_sec;
-	time->day = ret->tm_mday;
-	time->mon = ret->tm_mon + 1;
-	time->year = ret->tm_year - 80;
-	time->min = ret->tm_min;
-	time->hour = ret->tm_hour;
-	}
-    else {
-	time->sec = fs3.ftimeLastWrite.twosecs * 2;
-	time->day = fs3.fdateLastWrite.day;
-	time->mon = fs3.fdateLastWrite.month;
-	time->year = fs3.fdateLastWrite.year;
-	time->min = fs3.ftimeLastWrite.minutes;
-	time->hour = fs3.ftimeLastWrite.hours;
-	}
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    FILESTATUS3 fs3;
-    struct tm   tc;
-    struct tm   *ret;
-    time_t      tt;
-
-    if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&fs3,sizeof(fs3)))
-	return false;
-    if (gmTime) {
-	tc.tm_year = time->year + 80;
-	tc.tm_mon = time->mon - 1;
-	tc.tm_mday = time->day;
-	tc.tm_hour = time->hour;
-	tc.tm_min = time->min;
-	tc.tm_sec = time->sec;
-	if((tt = mktime(&tc)) == -1)
-	    return false;
-	ret = localtime(&tt);
-	fs3.ftimeLastWrite.twosecs = ret->tm_sec / 2;
-	fs3.fdateLastWrite.day = ret->tm_mday;
-	fs3.fdateLastWrite.month = ret->tm_mon + 1;
-	fs3.fdateLastWrite.year = ret->tm_year - 80;
-	fs3.ftimeLastWrite.minutes = ret->tm_min;
-	fs3.ftimeLastWrite.hours = ret->tm_hour;
-	}
-    else {
-	fs3.ftimeLastWrite.twosecs = time->sec / 2;
-	fs3.fdateLastWrite.day = time->day;
-	fs3.fdateLastWrite.month = time->mon;
-	fs3.fdateLastWrite.year = time->year;
-	fs3.ftimeLastWrite.minutes = time->min;
-	fs3.ftimeLastWrite.hours = time->hour;
-	}
-    memcpy(&fs3.fdateLastAccess, &fs3.fdateLastWrite, sizeof(FDATE));
-    memcpy(&fs3.fdateCreation, &fs3.fdateLastWrite, sizeof(FDATE));
-    memcpy(&fs3.ftimeLastAccess, &fs3.ftimeLastWrite, sizeof(FTIME));
-    memcpy(&fs3.ftimeCreation, &fs3.ftimeLastWrite, sizeof(FTIME));
-    DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&fs3,sizeof(FILESTATUS3),0L);
-    return true;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c
deleted file mode 100644
index 30ffe4340b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  OS/2
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong    frequency;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-    DosTmrQueryFreq(&frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm) DosTmrQueryTime((QWORD*)&tm->start)
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmLap,tmCount;
-
-    DosTmrQueryTime((QWORD*)&tmLap);
-    _CPU_diffTime64(&tm->start,&tmLap,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)    DosTmrQueryTime((QWORD*)&tm->end)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger tmCount;
-
-    _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    ULONG   count;
-    DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) );
-    return count;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c b/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c
deleted file mode 100644
index 7af20a9568..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  IBM PC (OS/2)
-*
-* Description:  OS/2 implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static int          oldMouseState;      /* Old mouse state              */
-static ulong        oldKeyMessage;      /* Old keyboard state           */
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-static int          rangeX,rangeY;      /* Range of mouse coordinates   */
-HMOU                _EVT_hMouse;        /* Handle to the mouse driver   */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under OS/2 */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from OS/2 into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    /* TODO: Implement this for OS/2 Presentation Manager apps! */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    /* Initialise the event queue */
-    EVT.mouseMove = mouseMove;
-    initEventQueue();
-    oldMouseState = 0;
-    oldKeyMessage = 0;
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* TODO: OS/2 PM specific initialisation code! */
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-    /* TODO: OS/2 PM specific exit code */
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h
deleted file mode 100644
index 0b69f8222c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/oshdr.h
deleted file mode 100644
index 404e5c93c5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/oshdr.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Header file to pull in OS specific headers for the target
-*               OS environment.
-*
-****************************************************************************/
-
-#if     defined(__SMX32__)
-#include "smx/oshdr.h"
-#elif   defined(__RTTARGET__)
-#include "rttarget/oshdr.h"
-#elif   defined(__REALDOS__)
-#include "dos/oshdr.h"
-#elif   defined(__WIN32_VXD__)
-#include "vxd/oshdr.h"
-#elif   defined(__NT_DRIVER__)
-#include "ntdrv/oshdr.h"
-#elif   defined(__WINDOWS32__)
-#include "win32/oshdr.h"
-#elif   defined(__OS2_VDD__)
-#include "vxd/oshdr.h"
-#elif   defined(__OS2__)
-#if     defined(__OS2_PM__)
-#include "os2pm/oshdr.h"
-#else
-#include "os2/oshdr.h"
-#endif
-#elif   defined(__LINUX__)
-#if     defined(__USE_X11__)
-#include "x11/oshdr.h"
-#else
-#include "linux/oshdr.h"
-#endif
-#elif   defined(__QNX__)
-#if     defined(__USE_PHOTON__)
-#include "photon/oshdr.h"
-#elif   defined(__USE_X11__)
-#include "x11/oshdr.h"
-#else
-#include "qnx/oshdr.h"
-#endif
-#elif   defined(__BEOS__)
-#include "beos/oshdr.h"
-#else
-#error  PM library not ported to this platform yet!
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/photon/event.c b/board/MAI/bios_emulator/scitech/src/pm/photon/event.c
deleted file mode 100644
index 581da16fdf..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/photon/event.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX Photon GUI
-*
-* Description:  QNX fullscreen console implementation for the SciTech
-*               cross platform event library.
-*
-****************************************************************************/
-
-/*--------------------------- Global variables ----------------------------*/
-
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Linux */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-static ibool _EVT_isKeyDown(
-    uchar scancode)
-{
-    return (KeyState[(scancode & 0xf8) >> 3] & (1 << (scancode & 0x7)) ?
-	true : false);
-}
-
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    int         pid;
-    uint            msg, but_stat, message;
-    uchar           evt[sizeof (PhEvent_t) + 1024];
-    PhEvent_t       *event = (void *)evt;
-    PhKeyEvent_t        *key;
-    PhPointerEvent_t    *mouse;
-    static int      extended;
-    event_t         _evt;
-
-    while (count < EVENTQSIZE) {
-	uint    mods = 0, keyp = 0;
-
-	pid = Creceive(0, &msg, sizeof (msg));
-
-	if (pid == -1)
-	    return;
-
-	if (PhEventRead(pid, event, sizeof (evt)) == Ph_EVENT_MSG) {
-	    memset(&evt, 0, sizeof (evt));
-	    if (event->type == Ph_EV_KEY) {
-		key = PhGetData(event);
-
-		if (key->key_flags & KEY_SCAN_VALID) {
-		    keyp = key->key_scan;
-		    if (key->key_flags & KEY_DOWN)
-			KeyState[(keyp & 0xf800) >> 11]
-			    |= 1 << ((keyp & 0x700) >> 8);
-		    else
-			KeyState[(keyp & 0xf800) >> 11]
-			    &= ~(1 << ((keyp & 0x700) >> 8));
-		}
-		if ((key->key_flags & KEY_SYM_VALID) || extended)
-		    keyp |= key->key_sym;
-
-		/* No way to tell left from right... */
-		if (key->key_mods & KEYMOD_SHIFT)
-		    mods = (EVT_LEFTSHIFT | EVT_RIGHTSHIFT);
-		if (key->key_mods & KEYMOD_CTRL)
-		    mods |= (EVT_CTRLSTATE | EVT_LEFTCTRL);
-		if (key->key_mods & KEYMOD_ALT)
-		    mods |= (EVT_ALTSTATE | EVT_LEFTALT);
-
-		_evt.when = evt->timestamp;
-		if (key->key_flags & KEY_REPEAT) {
-		    _evt.what = EVT_KEYREPEAT;
-		    _evt.message = 0x10000;
-		    }
-		else if (key->key_flags & KEY_DOWN)
-		    _evt.what = EVT_KEYDOWN;
-		else
-		    _evt.what = EVT_KEYUP;
-		_evt.modifiers = mods;
-		_evt.message |= keyp;
-
-		addEvent(&_evt);
-
-		switch(key->key_scan & 0xff00) {
-		    case 0xe000:
-			extended = 1;
-			break;
-		    case 0xe001:
-			extended = 2;
-			break;
-		    default:
-			if (extended)
-			    extended--;
-		    }
-		}
-	    else if (event->type & Ph_EV_PTR_ALL) {
-		but_stat = message = 0;
-		mouse = PhGetData(event);
-
-		if (mouse->button_state & Ph_BUTTON_3)
-		    but_stat = EVT_LEFTBUT;
-		if (mouse->buttons & Ph_BUTTON_3)
-		    message = EVT_LEFTBMASK;
-
-		if (mouse->button_state & Ph_BUTTON_1)
-		    but_stat |= EVT_RIGHTBUT;
-		if (mouse->buttons & Ph_BUTTON_1)
-		    message |= EVT_RIGHTBMASK;
-
-		_evt.when = evt->timestamp;
-		if (event->type & Ph_EV_PTR_MOTION) {
-		    _evt.what = EVT_MOUSEMOVE;
-		    _evt.where_x = mouse->pos.x;
-		    _evt.where_y = mouse->pos.y;
-		    _evt.modifiers = but_stat;
-		    addEvent(&_evt);
-		    }
-		if (event->type & Ph_EV_BUT_PRESS)
-		    _evt.what = EVT_MOUSEDOWN;
-		else
-		    _evt.what = EVT_MOUSEUP;
-		_evt.where_x = mouse->pos.x;
-		_evt.where_y = mouse->pos.y;
-		_evt.modifiers = but_stat;
-		_evt.message = message;
-		addEvent(&_evt);
-		}
-	    }
-	else
-	    return;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
-    int signo)
-{
-    char    buf[80];
-
-    EVT_exit();
-    sprintf(buf,"Terminating on signal %d",signo);
-    PM_fatalError(buf);
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    int         i;
-
-    /* Initialise the event queue */
-    _mouseMove = mouseMove;
-    initEventQueue();
-    memset((void *)KeyState, 0, sizeof (KeyState));
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    /* TODO: Need to call Input to change the coordinates that it returns */
-    /*       for mouse events!! */
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for Photon */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for Photon */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h
deleted file mode 100644
index 3c72563de2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX Photon GUI
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <sys/mouse.h>
-#include <sys/keyboard.h>
-#include <sys/fd.h>
-#include <sys/stat.h>
-#include <conio.h>
-#include <process.h>
-#include <sys/kernel.h>
-#include <Ph.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pm.vpw b/board/MAI/bios_emulator/scitech/src/pm/pm.vpw
deleted file mode 100644
index 26e68a7a3a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pm.vpw
+++ /dev/null
@@ -1,43 +0,0 @@
-[Dependencies]

-[CurrentProject]

-curproj=pmlinux.vpj

-[ProjectFiles]

-pmcommon.vpj

-pmdos.vpj

-pmlinux.vpj

-pmqnx.vpj

-pmvxd.vpj

-pmwin32.vpj

-z_samples.vpj

-..\a-global includes.vpj

-[TreeExpansion]

-"..\a-global includes.vpj" 0

-pmcommon.vpj 0

-pmdos.vpj 0

-pmlinux.vpj 0

-pmqnx.vpj 0

-pmvxd.vpj 0

-pmwin32.vpj 0

-z_samples.vpj 1 1

-[State]

-SCREEN: 1280 1024 0 0 960 746 0 0 M 0 0 0 0 977 631

-CWD: C:\scitech\src\pm

-FILEHIST: 9

-C:\scitech\makedefs\gcc_win32.mk

-C:\scitech\bin\gcc2-w32.bat

-C:\scitech\bin\gcc2-c32.bat

-C:\scitech\bin\gcc2-linux.bat

-C:\scitech\makedefs\gcc_linux.mk

-C:\scitech\src\pm\linux\event.c

-C:\scitech\src\pm\linux\oshdr.h

-C:\scitech\src\pm\event.c

-C:\scitech\src\pm\pmlinux.vpj

-[ProjectDates]

-pmcommon.vpj=20010517164335290

-pmdos.vpj=20010517164335290

-pmlinux.vpj=20010620175829812

-pmqnx.vpj=20010517164335290

-pmvxd.vpj=20010517164335306

-pmwin32.vpj=20010517164335306

-z_samples.vpj=20010517164335306

-..\a-global includes.vpj=20010517164334978

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj
deleted file mode 100644
index 48b872d981..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj
+++ /dev/null
@@ -1,45 +0,0 @@
-[COMPILER]

-version=5.0b

-MACRO=\n

-activeconfig=,wc10-d32

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\nOther Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n*.*\n

-FILTERASSOCIATEFILETYPES=0 0 0 0 

-FILTERAPPCOMMAND=\n\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|hide|:Compile:&Compile,

-make=concur|capture|hide|clear|saveall|:Build:&Build,

-rebuild=concur|capture|hide|clear|saveall|:Rebuild:&Rebuild,

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-common.c

-cpuinfo.c

-debug.c

-event.c

-makefile

-oshdr.h

-ztimer.c

-..\common\agplib.c

-codepage\us_eng.c

-common\_cpuinfo.asm

-common\_dma.asm

-common\_int64.asm

-common\_joy.asm

-common\_mtrr.asm

-common\_pcilib.asm

-common\agp.c

-common\keyboard.c

-common\malloc.c

-common\mtrr.c

-common\pcilib.c

-common\unixio.c

-common\vgastate.c

-[ASSOCIATION]

-[CONFIGURATIONS]

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj
deleted file mode 100644
index 1157513b30..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj
+++ /dev/null
@@ -1,41 +0,0 @@
-[SciTech]

-compiler=wc10- 

-targetos=d32 

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,TEST_HARNESS=1

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0 

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|clear|:Compile:&Compile,dmake %n.obj -u %b

-make=concur|capture|clear|saveall|:Build:&Build,dmake install %b

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u %b

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-dos\_event.asm

-dos\_lztimer.asm

-dos\_pm.asm

-dos\_pmdos.asm

-dos\_vflat.asm

-dos\cpuinfo.c

-dos\event.c

-dos\oshdr.h

-dos\pm.c

-dos\pmdos.c

-dos\vflat.c

-dos\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

-config=,NORMAL_BUILD=1

-config=,TEST_HARNESS=1

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj
deleted file mode 100644
index 0bfbf8446a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]

-compiler=gcc2-

-targetos=linux

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-activeconfig=,install BUILD_DLL=1

-compile=concur|capture|clear|:Compile:&Compile,dmake %n.o -u

-make=concur|capture|clear|saveall|:Build:&Build,dmake %b

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake -u %b

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-linux\cpuinfo.c

-linux\event.c

-linux\oshdr.h

-linux\pm.c

-linux\vflat.c

-linux\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

-config=,install BUILD_DLL=1

-config=,install

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj
deleted file mode 100644
index 3ec35a76e4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj
+++ /dev/null
@@ -1,39 +0,0 @@
-[SciTech]

-compiler=vc60- 

-targetos=drvw2k

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,wc10-d32

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|:Compile:&Compile,dmake %n.obj

-make=concur|capture|clear|saveall|:Build:&Build,dmake install

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|hide|savenone|:Clean Directory:&Clean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-..\..\include\ntdriver.h

-ntdrv\_pm.asm

-ntdrv\cpuinfo.c

-ntdrv\int86.c

-ntdrv\irq.c

-ntdrv\mem.c

-ntdrv\oshdr.h

-ntdrv\pm.c

-ntdrv\stdio.c

-ntdrv\stdlib.c

-ntdrv\vflat.c

-ntdrv\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj
deleted file mode 100644
index d54170252c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]

-compiler=wc10-

-targetos=qnx

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,wc10-d32

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|clear|:Compile:&Compile,dmake %n.obj

-make=concur|capture|clear|saveall|:Build:&Build,dmake install

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-qnx\_mtrrqnx.asm

-qnx\cpuinfo.c

-qnx\event.c

-qnx\mtrrqnx.c

-qnx\oshdr.h

-qnx\pm.c

-qnx\vflat.c

-qnx\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj
deleted file mode 100644
index 1fcf911769..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj
+++ /dev/null
@@ -1,34 +0,0 @@
-[SciTech]

-compiler=bc50-

-targetos=vxd

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,wc10-d32

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0 

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|nochangedir|:Compile:&Compile,dmake %n.obj

-make=concur|capture|clear|saveall|nochangedir|:Build:&Build,dmake install

-rebuild=concur|capture|clear|saveall|nochangedir|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u

-debug=concur|capture|hide|savenone|nochangedir|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:&Clean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-vxd\_pm.asm

-vxd\cpuinfo.c

-vxd\fileio.c

-vxd\oshdr.h

-vxd\pm.c

-vxd\vflat.c

-vxd\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj
deleted file mode 100644
index ace682208c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]

-compiler=vc60- 

-targetos=c32 

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,wc10-d32

-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n

-FILTERASSOCIATEFILETYPES=0 0 0 

-FILTERAPPCOMMAND=\n\n\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|:Compile:&Compile,dmake %n.obj

-make=concur|capture|clear|saveall|:Build:&Build,dmake install

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u

-debug=concur|capture|hide|savenone|:Debug:&Debug,

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|:User 1:User 1,

-user2=hide|:User 2:User 2,

-usertool_clean_directory=concur|capture|savenone|:Clean Directory:&Clean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-win32\_pmwin32.asm

-win32\cpuinfo.c

-win32\ddraw.c

-win32\event.c

-win32\oshdr.h

-win32\pm.c

-win32\vflat.c

-win32\ztimer.c

-[ASSOCIATION]

-[CONFIGURATIONS]

diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm b/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm
deleted file mode 100644
index 5a3fe105ec..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm
+++ /dev/null
@@ -1,226 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NASM
-;* Environment: QNX
-;*
-;* Description: Assembler support routines for the Memory Type Range Register
-;*              (MTRR) module for QNX.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _mtrrqnx                ; Set up memory model
-
-begdataseg  _mtrrqnx                ; Start of code segment
-
-ifdef   USE_NASM
-%define R0_FLUSH_TLB    0
-%define R0_SAVE_CR4     1
-%define R0_RESTORE_CR4  2
-%define R0_READ_MSR     3
-%define R0_WRITE_MSR    4
-else
-R0_FLUSH_TLB        EQU 0
-R0_SAVE_CR4         EQU 1
-R0_RESTORE_CR4      EQU 2
-R0_READ_MSR         EQU 3
-R0_WRITE_MSR        EQU 4
-endif
-
-cpublic _PM_R0
-_PM_R0_service      dd  0
-_PM_R0_reg          dd  0
-_PM_R0_eax          dd  0
-_PM_R0_edx          dd  0
-
-enddataseg  _mtrrqnx                ; Start of code segment
-
-begcodeseg  _mtrrqnx                ; Start of code segment
-
-P586
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_disableInt
-
-        pushfd                  ; Put flag word on stack
-;       cli                     ; Disable interrupts!
-        pop     eax             ; deposit flag word in return register
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_restoreInt
-
-        ARG     ps:ULONG
-
-        push    ebp
-        mov     ebp,esp         ; Set up stack frame
-        push    [ULONG ps]
-        popfd                   ; Restore processor status (and interrupts)
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_getCx86
-
-        ARG     reg:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        in      al,23h
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart  _MTRR_setCx86
-
-        ARG     reg:UCHAR, val:UCHAR
-
-        enter_c
-        mov     al,[reg]
-        out     22h,al
-        mov     al,[val]
-        out     23h,al
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PM_ring0_isr(void);
-;----------------------------------------------------------------------------
-; Ring 0 clock interrupt handler that we use to execute the MTRR support
-; code.
-;----------------------------------------------------------------------------
-cprocnear   _PM_ring0_isr
-
-;--------------------------------------------------------
-; void PM_flushTLB(void);
-;--------------------------------------------------------
-        pushad
-        cmp     [DWORD _PM_R0_service],R0_FLUSH_TLB
-        jne     @@1
-        wbinvd                  ; Flush the CPU cache
-        mov     eax,cr3         
-        mov     cr3,eax         ; Flush the TLB
-        jmp     @@Exit
-
-;--------------------------------------------------------
-; ulong _MTRR_saveCR4(void);
-;--------------------------------------------------------
-@@1:    cmp     [DWORD _PM_R0_service],R0_SAVE_CR4
-        jne     @@2
-
-; Save value of CR4 and clear Page Global Enable (bit 7)
-
-        mov     ebx,cr4
-        mov     eax,ebx
-        and     al,7Fh
-        mov     cr4,eax
-
-; Disable and flush caches
-
-        mov     eax,cr0
-        or      eax,40000000h
-        wbinvd
-        mov     cr0,eax
-        wbinvd
-
-; Return value from CR4
-
-        mov     [_PM_R0_reg],ebx
-        jmp     @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_restoreCR4(ulong cr4Val)
-;--------------------------------------------------------
-@@2:    cmp     [DWORD _PM_R0_service],R0_RESTORE_CR4
-        jne     @@3
-
-        mov     eax,cr0
-        and     eax,0BFFFFFFFh
-        mov     cr0,eax
-        mov     eax,[_PM_R0_reg]
-        mov     cr4,eax
-        jmp     @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_readMSR(int reg, ulong FAR *eax, ulong FAR *edx);
-;--------------------------------------------------------
-@@3:    cmp     [DWORD _PM_R0_service],R0_READ_MSR
-        jne     @@4
-
-        mov     ecx,[_PM_R0_reg]
-        rdmsr
-        mov     [_PM_R0_eax],eax
-        mov     [_PM_R0_edx],edx
-        jmp     @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_writeMSR(int reg, ulong eax, ulong edx);
-;--------------------------------------------------------
-@@4:    cmp     [DWORD _PM_R0_service],R0_WRITE_MSR
-        jne     @@Exit
-
-        mov     ecx,[_PM_R0_reg]
-        mov     eax,[_PM_R0_eax]
-        mov     edx,[_PM_R0_edx]
-        wrmsr
-        jmp     @@Exit
-
-@@Exit: mov     [DWORD _PM_R0_service],-1
-        popad
-        mov     eax,0
-        retf
-
-cprocend
-
-endcodeseg  _mtrrqnx
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c
deleted file mode 100644
index a8782542b2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  QNX specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for QNX!
-****************************************************************************/
-#define SetMaxThreadPriority()  0
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for QNX!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    freq->low = CLOCKS_PER_SEC * 1000;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)           \
-{                               \
-    (t)->low = clock() * 1000;  \
-    (t)->high = 0;              \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c
deleted file mode 100644
index 45cd514454..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  QNX fullscreen console implementation for the SciTech
-*               cross platform event library.
-*
-****************************************************************************/
-
-#include <errno.h>
-#include <unistd.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-#ifndef __QNXNTO__
-static struct _mouse_ctrl   *_PM_mouse_ctl;
-static int          _PM_keyboard_fd = -1;
-/*static int            _PM_modifiers, _PM_leds; */
-#else
-static int          kbd_fd = -1, mouse_fd = -1;
-#endif
-static int          kill_pid = 0;
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-static int          rangeX,rangeY;      /* Range of mouse coordinates   */
-
-#define TIME_TO_MSEC(__t)   ((__t).tv_nsec / 1000000 + (__t).tv_sec * 1000)
-
-#define LED_NUM         1
-#define LED_CAP         2
-#define LED_SCR         4
-
-/* Scancode mappings on QNX for special keys */
-
-typedef struct {
-    int scan;
-    int map;
-    } keymap;
-
-/* TODO: Fix this and set it up so we can do a binary search! */
-
-keymap keymaps[] = {
-    {96, KB_padEnter},
-    {74, KB_padMinus},
-    {78, KB_padPlus},
-    {55, KB_padTimes},
-    {98, KB_padDivide},
-    {71, KB_padHome},
-    {72, KB_padUp},
-    {73, KB_padPageUp},
-    {75, KB_padLeft},
-    {76, KB_padCenter},
-    {77, KB_padRight},
-    {79, KB_padEnd},
-    {80, KB_padDown},
-    {81, KB_padPageDown},
-    {82, KB_padInsert},
-    {83, KB_padDelete},
-    {105,KB_left},
-    {108,KB_down},
-    {106,KB_right},
-    {103,KB_up},
-    {110,KB_insert},
-    {102,KB_home},
-    {104,KB_pageUp},
-    {111,KB_delete},
-    {107,KB_end},
-    {109,KB_pageDown},
-    {125,KB_leftWindows},
-    {126,KB_rightWindows},
-    {127,KB_menu},
-    {100,KB_rightAlt},
-    {97,KB_rightCtrl},
-    };
-
-/* And the keypad with num lock turned on (changes the ASCII code only) */
-
-keymap keypad[] = {
-    {71, ASCII_7},
-    {72, ASCII_8},
-    {73, ASCII_9},
-    {75, ASCII_4},
-    {76, ASCII_5},
-    {77, ASCII_6},
-    {79, ASCII_1},
-    {80, ASCII_2},
-    {81, ASCII_3},
-    {82, ASCII_0},
-    {83, ASCII_period},
-    };
-
-#define NB_KEYMAPS (sizeof(keymaps)/sizeof(keymaps[0]))
-#define NB_KEYPAD (sizeof(keypad)/sizeof(keypad[0]))
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#include "common/keyboard.c"
-
-/* These are not used under QNX */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    struct timespec t;
-    clock_gettime(CLOCK_REALTIME,&t);
-    return (t.tv_nsec / 1000000 + t.tv_sec * 1000);
-}
-
-/****************************************************************************
-REMARKS:
-Converts a mickey movement value to a pixel adjustment value.
-****************************************************************************/
-static int MickeyToPixel(
-    int mickey)
-{
-    /* TODO: We can add some code in here to handle 'acceleration' for */
-    /*       the mouse cursor. For now just use the mickeys. */
-    return mickey;
-}
-
-#ifdef __QNXNTO__
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    int         rc1, rc2;
-    struct _keyboard_packet key;
-    struct _mouse_packet    ms;
-    static long     old_buttons = 0;
-    uint            message = 0, but_stat = 0, mods = 0;
-    event_t         evt;
-
-    while (EVT.count < EVENTQSIZE) {
-	rc1 = read(kbd_fd, (void *)&key, sizeof(key));
-	if (rc1 == -1) {
-	    if (errno == EAGAIN)
-		rc1 = 0;
-	    else {
-		perror("getEvents");
-		PM_fatalError("Keyboard error");
-		}
-	    }
-	if (rc1 > 0) {
-	    memset(&evt, 0, sizeof(evt));
-	    if (key.data.modifiers & KEYMOD_SHIFT)
-		mods |= EVT_LEFTSHIFT;
-	    if (key.data.modifiers & KEYMOD_CTRL)
-		mods |= EVT_CTRLSTATE;
-	    if (key.data.modifiers & KEYMOD_ALT)
-		mods |= EVT_ALTSTATE;
-
-	    /* Now store the keyboard event data */
-	    evt.when = TIME_TO_MSEC(key.time);
-	    if (key.data.flags & KEY_SCAN_VALID)
-		evt.message |= (key.data.key_scan & 0x7F) << 8;
-	    if ((key.data.flags & KEY_SYM_VALID) &&
-		(((key.data.key_sym & 0xff00) == 0xf000 &&
-		(key.data.key_sym & 0xff) < 0x20) ||
-		key.data.key_sym < 0x80))
-		evt.message |= (key.data.key_sym & 0xFF);
-	    evt.modifiers = mods;
-	    if (key.data.flags & KEY_DOWN) {
-		evt.what = EVT_KEYDOWN;
-		keyUpMsg[evt.message >> 8] = (ushort)evt.message;
-		}
-	    else if (key.data.flags & KEY_REPEAT) {
-		evt.message |= 0x10000;
-		evt.what = EVT_KEYREPEAT;
-		}
-	    else {
-		evt.what = EVT_KEYUP;
-		evt.message = keyUpMsg[evt.message >> 8];
-		if (evt.message == 0)
-		    continue;
-		keyUpMsg[evt.message >> 8] = 0;
-		}
-
-	    /* Now add the new event to the event queue */
-	    addEvent(&evt);
-	    }
-	rc2 = read(mouse_fd, (void *)&ms, sizeof (ms));
-	if (rc2 == -1) {
-	    if (errno == EAGAIN)
-		rc2 = 0;
-	    else {
-		perror("getEvents");
-		PM_fatalError("Mouse error");
-		}
-	    }
-	if (rc2 > 0) {
-	    memset(&evt, 0, sizeof(evt));
-	    ms.hdr.buttons &=
-		(_POINTER_BUTTON_LEFT | _POINTER_BUTTON_RIGHT);
-	    if (ms.hdr.buttons & _POINTER_BUTTON_LEFT)
-		but_stat = EVT_LEFTBUT;
-	    if ((ms.hdr.buttons & _POINTER_BUTTON_LEFT) !=
-		(old_buttons & _POINTER_BUTTON_LEFT))
-		message = EVT_LEFTBMASK;
-	    if (ms.hdr.buttons & _POINTER_BUTTON_RIGHT)
-		but_stat |= EVT_RIGHTBUT;
-	    if ((ms.hdr.buttons & _POINTER_BUTTON_RIGHT) !=
-		(old_buttons & _POINTER_BUTTON_RIGHT))
-		message |= EVT_RIGHTBMASK;
-	    if (ms.dx || ms.dy) {
-		ms.dy = -ms.dy;
-		EVT.mx += MickeyToPixel(ms.dx);
-		EVT.my += MickeyToPixel(ms.dy);
-		if (EVT.mx < 0) EVT.mx = 0;
-		if (EVT.my < 0) EVT.my = 0;
-		if (EVT.mx > rangeX)    EVT.mx = rangeX;
-		if (EVT.my > rangeY)    EVT.my = rangeY;
-		evt.what = EVT_MOUSEMOVE;
-		evt.when = TIME_TO_MSEC(ms.hdr.time);
-		evt.where_x = EVT.mx;
-		evt.where_y = EVT.my;
-		evt.relative_x = ms.dx;
-		evt.relative_y = ms.dy;
-		evt.modifiers = but_stat;
-		addEvent(&evt);
-		}
-	    evt.what = ms.hdr.buttons < old_buttons ?
-		EVT_MOUSEUP : EVT_MOUSEDOWN;
-	    evt.when = TIME_TO_MSEC(ms.hdr.time);
-	    evt.where_x = EVT.mx;
-	    evt.where_y = EVT.my;
-	    evt.relative_x = ms.dx;
-	    evt.relative_y = ms.dy;
-	    evt.modifiers = but_stat;
-	    evt.message = message;
-	    if (ms.hdr.buttons != old_buttons) {
-		addEvent(&evt);
-		old_buttons = ms.hdr.buttons;
-		}
-	    }
-	if (rc1 + rc2 == 0)
-	    break;
-	}
-}
-#else
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    struct mouse_event      ev;
-    int             rc;
-    static long         old_buttons = 0;
-    uint                message = 0, but_stat = 0;
-    event_t             evt;
-    char                buf[32];
-    int             numkeys, i;
-
-    /* Poll keyboard events */
-    while ((numkeys = read(_PM_keyboard_fd, buf, sizeof buf)) > 0) {
-	for (i = 0; i < numkeys; i++) {
-	    processRawScanCode(buf[i]);
-	    }
-	}
-
-    if (_PM_mouse_ctl == NULL)
-	return;
-
-    /* Gobble pending mouse events */
-    while (EVT.count < EVENTQSIZE) {
-	rc = mouse_read(_PM_mouse_ctl, &ev, 1, 0, NULL);
-	if (rc == -1) {
-	    perror("getEvents");
-	    PM_fatalError("Mouse error (Input terminated?)");
-	    }
-	if (rc == 0)
-	    break;
-
-	message = 0, but_stat = 0;
-	memset(&evt, 0, sizeof(evt));
-
-	ev.buttons &= (_MOUSE_LEFT | _MOUSE_RIGHT);
-	if (ev.buttons & _MOUSE_LEFT)
-	    but_stat = EVT_LEFTBUT;
-	if ((ev.buttons & _MOUSE_LEFT) != (old_buttons & _MOUSE_LEFT))
-	    message = EVT_LEFTBMASK;
-	if (ev.buttons & _MOUSE_RIGHT)
-	    but_stat |= EVT_RIGHTBUT;
-	if ((ev.buttons & _MOUSE_RIGHT) != (old_buttons & _MOUSE_RIGHT))
-	    message |= EVT_RIGHTBMASK;
-	if (ev.dx || ev.dy) {
-	    ev.dy = -ev.dy;
-	    EVT.mx += MickeyToPixel(ev.dx);
-	    EVT.my += MickeyToPixel(ev.dy);
-	    if (EVT.mx < 0) EVT.mx = 0;
-	    if (EVT.my < 0) EVT.my = 0;
-	    if (EVT.mx > rangeX)    EVT.mx = rangeX;
-	    if (EVT.my > rangeY)    EVT.my = rangeY;
-	    evt.what = EVT_MOUSEMOVE;
-	    evt.when = ev.timestamp*100;
-	    evt.where_x = EVT.mx;
-	    evt.where_y = EVT.my;
-	    evt.relative_x = ev.dx;
-	    evt.relative_y = ev.dy;
-	    evt.modifiers = but_stat;
-	    addEvent(&evt);
-	    }
-	evt.what = ev.buttons < old_buttons ? EVT_MOUSEUP : EVT_MOUSEDOWN;
-	evt.when = ev.timestamp*100;
-	evt.where_x = EVT.mx;
-	evt.where_y = EVT.my;
-	evt.relative_x = ev.dx;
-	evt.relative_y = ev.dy;
-	evt.modifiers = but_stat;
-	evt.message = message;
-	if (ev.buttons != old_buttons) {
-	    addEvent(&evt);
-	    old_buttons = ev.buttons;
-	    }
-	}
-}
-#endif  /* __QNXNTO__ */
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
-    int signo)
-{
-    char    buf[80];
-
-    EVT_exit();
-    sprintf(buf,"Terminating on signal %d",signo);
-    PM_fatalError(buf);
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    int         i;
-    struct stat st;
-    char        *iarg[16];
-#ifdef __QNXNTO__
-    char        buf[128];
-    FILE        *p;
-    int         argno,len;
-#endif
-
-#ifdef __QNXNTO__
-    ThreadCtl(_NTO_TCTL_IO, 0); /* So joystick code won't blow up */
-#endif
-
-    /* Initialise the event queue */
-    EVT.mouseMove = mouseMove;
-    initEventQueue();
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-#ifdef __QNXNTO__
-    /*
-     * User may already have input running with the right parameters.
-     * Thus they could start input at boot time, using the output of
-     * inputtrap, passing the the -r flag to make it run as a resource
-     * manager.
-     */
-    if ((mouse_fd = open("/dev/mouse0", O_RDONLY | O_NONBLOCK)) < 0) {
-	/* Run inputtrap to get the args for input */
-	if ((p = popen("inputtrap", "r")) == NULL)
-	    PM_fatalError("Error running 'inputtrap'");
-	fgets(buf, sizeof(buf), p);
-	pclose(p);
-
-	/* Build the argument list */
-	len = strlen(buf);
-	iarg[0] = buf;
-	for (i = 0, argno = 0; i < len && argno < 15;) {
-	    if (argno == 1) {
-		/*
-		 * Add flags to input's arg list.
-		 * '-r' means run as resource
-		 * manager, providing the /dev/mouse
-		 * and /dev/keyboard interfaces.
-		 * '-P' supresses the /dev/photon
-		 * mechanism.
-		 */
-		iarg[argno++] = "-Pr";
-		continue;
-		}
-	    while (buf[i] == ' ')
-		i++;
-	    if (buf[i] == '\0' || buf[i] == '\n')
-		break;
-	    iarg[argno++] = &buf[i];
-	    while (buf[i] != ' '
-		&& buf[i] != '\0' && buf[i] != '\n')
-		i++;
-	    buf[i++] = '\0';
-	    }
-	iarg[argno] = NULL;
-
-	if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], iarg)) == -1) {
-	    perror("spawning input resmgr");
-	    PM_fatalError("Could not start input resmgr");
-	    }
-	for (i = 0; i < 10; i++) {
-	    if (stat("/dev/mouse0", &st) == 0)
-		break;
-	    sleep(1);
-	    }
-	if ((mouse_fd = open("/dev/mouse0", O_RDONLY|O_NONBLOCK)) < 0) {
-	    perror("/dev/mouse0");
-	    PM_fatalError("Could not open /dev/mouse0");
-	    }
-	}
-    if ((kbd_fd = open("/dev/keyboard0", O_RDONLY|O_NONBLOCK)) < 0) {
-	perror("/dev/keyboard0");
-	PM_fatalError("Could not open /dev/keyboard0");
-	}
-#else
-    /* Connect to Input/Mouse for event handling */
-    if (_PM_mouse_ctl == NULL) {
-	_PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0);
-
-	/* "Mouse" is not running; attempt to start it */
-	if (_PM_mouse_ctl == NULL) {
-	    iarg[0] = "mousetrap";
-	    iarg[1] = "start";
-	    iarg[2] = NULL;
-	    if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], (void*)iarg)) == -1)
-		perror("spawn (mousetrap)");
-	    else {
-		for (i = 0; i < 10; i++) {
-		    if (stat("/dev/mouse", &st) == 0)
-			break;
-		    sleep(1);
-		    }
-		_PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0);
-		}
-	    }
-	}
-    if (_PM_keyboard_fd == -1)
-	_PM_keyboard_fd = open("/dev/kbd", O_RDONLY|O_NONBLOCK);
-#endif
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for QNX */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for QNX */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-#ifdef __QNXNTO__
-    char    c;
-    int flags;
-
-    if (kbd_fd != -1) {
-	close(kbd_fd);
-	kbd_fd = -1;
-	}
-    if (mouse_fd != -1) {
-	close(mouse_fd);
-	mouse_fd = -1;
-	}
-#endif
-
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-#ifndef __QNXNTO__
-    /* Kill the Input/Mouse driver if we have spawned it */
-    if (_PM_mouse_ctl != NULL) {
-	struct _fd_entry    fde;
-	uint            pid = 0;
-
-	/* Find out the pid of the mouse driver */
-	if (kill_pid > 0) {
-	    if (qnx_fd_query(0,
-		0, _PM_mouse_ctl->fd, &fde) != -1)
-		pid = fde.pid;
-	    }
-	mouse_close(_PM_mouse_ctl);
-	_PM_mouse_ctl = NULL;
-
-	if (pid > 0) {
-	    /* For some reasons the PID's are different under QNX4,
-	     * so we use the old mechanism to kill the mouse server.
-	     */
-	    kill(pid, SIGTERM);
-	    kill_pid = 0;
-	    }
-	}
-#endif
-    if (kill_pid > 0) {
-	kill(kill_pid, SIGTERM);
-	kill_pid = 0;
-	}
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c
deleted file mode 100644
index f960c75714..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  MTRR helper functions module. To make it easier to implement
-*               the MTRR support under QNX, we simply put our ring 0 helper
-*               functions into stubs that run them at ring 0 using whatever
-*               mechanism is available.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <sys/mman.h>
-#include <time.h>
-#ifdef __QNXNTO__
-#include <sys/neutrino.h>
-#include <sys/syspage.h>
-#else
-#include <i86.h>
-#include <sys/irqinfo.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define R0_FLUSH_TLB    0
-#define R0_SAVE_CR4     1
-#define R0_RESTORE_CR4  2
-#define R0_READ_MSR     3
-#define R0_WRITE_MSR    4
-
-typedef struct {
-    int     service;
-    int     reg;
-    ulong   eax;
-    ulong   edx;
-    } R0_data;
-
-extern volatile R0_data _PM_R0;
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef __QNXNTO__
-const struct sigevent * _ASMAPI _PM_ring0_isr(void *arg, int id);
-#else
-pid_t far _ASMAPI _PM_ring0_isr();
-#endif
-
-/****************************************************************************
-REMARKS:
-Return true if ring 0 (or if we can call the helpers functions at ring 0)
-****************************************************************************/
-ibool _ASMAPI _MTRR_isRing0(void)
-{
-#ifdef __QNXNTO__
-    return false;   /* Not implemented yet! */
-#else
-    return true;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to execute a service at ring 0. This is done using the clock
-interrupt handler since the code we attach to it will always run at ring 0.
-****************************************************************************/
-static void CallRing0(void)
-{
-#ifdef __QNXNTO__
-    uint    clock_intno = SYSPAGE_ENTRY(qtime)->intr;
-#else
-    uint    clock_intno = 0;    /* clock irq */
-#endif
-    int     intrid;
-
-#ifdef __QNXNTO__
-    mlock((void*)&_PM_R0, sizeof(_PM_R0));
-    ThreadCtl(_NTO_TCTL_IO, 0);
-#endif
-#ifdef __QNXNTO__
-    if ((intrid = InterruptAttach(_NTO_INTR_CLASS_EXTERNAL | clock_intno,
-	_PM_ring0_isr, (void*)&_PM_R0, sizeof(_PM_R0), _NTO_INTR_FLAGS_END)) == -1) {
-#else
-    if ((intrid = qnx_hint_attach(clock_intno, _PM_ring0_isr, FP_SEG(&_PM_R0))) == -1) {
-#endif
-	perror("Attach");
-	exit(-1);
-	}
-    while (_PM_R0.service != -1)
-	;
-#ifdef __QNXNTO__
-    InterruptDetachId(intrid);
-#else
-    qnx_hint_detach(intrid);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
-    _PM_R0.service = R0_FLUSH_TLB;
-    CallRing0();
-}
-
-/****************************************************************************
-REMARKS:
-Read and return the value of the CR4 register
-****************************************************************************/
-ulong _ASMAPI _MTRR_saveCR4(void)
-{
-    _PM_R0.service = R0_SAVE_CR4;
-    CallRing0();
-    return _PM_R0.reg;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the value of the CR4 register
-****************************************************************************/
-void _ASMAPI _MTRR_restoreCR4(ulong cr4Val)
-{
-    _PM_R0.service = R0_RESTORE_CR4;
-    _PM_R0.reg = cr4Val;
-    CallRing0();
-}
-
-/****************************************************************************
-REMARKS:
-Read a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_readMSR(
-    int reg,
-    ulong *eax,
-    ulong *edx)
-{
-    _PM_R0.service = R0_READ_MSR;
-    _PM_R0.reg = reg;
-    CallRing0();
-    *eax = _PM_R0.eax;
-    *edx = _PM_R0.edx;
-}
-
-/****************************************************************************
-REMARKS:
-Write a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_writeMSR(
-    int reg,
-    ulong eax,
-    ulong edx)
-{
-    _PM_R0.service = R0_WRITE_MSR;
-    _PM_R0.reg = reg;
-    _PM_R0.eax = eax;
-    _PM_R0.edx = edx;
-    CallRing0();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h
deleted file mode 100644
index 0961193049..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <process.h>
-#include <time.h>
-#ifndef __QNXNTO__
-#include <sys/mouse.h>
-#include <sys/keyboard.h>
-#include <sys/fd.h>
-#include <conio.h>
-#else
-#include <sys/dcmd_input.h>
-
-/* Things 'borrowed' from photon/keycodes.h */
-
-/*
- * Keyboard modifiers
- */
-#define KEYMODBIT_SHIFT                                         0
-#define KEYMODBIT_CTRL                                          1
-#define KEYMODBIT_ALT                                           2
-#define KEYMODBIT_ALTGR                                         3
-#define KEYMODBIT_SHL3                                          4
-#define KEYMODBIT_MOD6                                          5
-#define KEYMODBIT_MOD7                                          6
-#define KEYMODBIT_MOD8                                          7
-
-#define KEYMODBIT_SHIFT_LOCK                                    8
-#define KEYMODBIT_CTRL_LOCK                                     9
-#define KEYMODBIT_ALT_LOCK                                      10
-#define KEYMODBIT_ALTGR_LOCK                                    11
-#define KEYMODBIT_SHL3_LOCK                                     12
-#define KEYMODBIT_MOD6_LOCK                                     13
-#define KEYMODBIT_MOD7_LOCK                                     14
-#define KEYMODBIT_MOD8_LOCK                                     15
-
-#define KEYMODBIT_CAPS_LOCK                                     16
-#define KEYMODBIT_NUM_LOCK                                      17
-#define KEYMODBIT_SCROLL_LOCK                                   18
-
-#define KEYMOD_SHIFT                                            (1 << KEYMODBIT_SHIFT)
-#define KEYMOD_CTRL                                             (1 << KEYMODBIT_CTRL)
-#define KEYMOD_ALT                                              (1 << KEYMODBIT_ALT)
-#define KEYMOD_ALTGR                                            (1 << KEYMODBIT_ALTGR)
-#define KEYMOD_SHL3                                             (1 << KEYMODBIT_SHL3)
-#define KEYMOD_MOD6                                             (1 << KEYMODBIT_MOD6)
-#define KEYMOD_MOD7                                             (1 << KEYMODBIT_MOD7)
-#define KEYMOD_MOD8                                             (1 << KEYMODBIT_MOD8)
-
-#define KEYMOD_SHIFT_LOCK                                       (1 << KEYMODBIT_SHIFT_LOCK)
-#define KEYMOD_CTRL_LOCK                                        (1 << KEYMODBIT_CTRL_LOCK)
-#define KEYMOD_ALT_LOCK                                         (1 << KEYMODBIT_ALT_LOCK)
-#define KEYMOD_ALTGR_LOCK                                       (1 << KEYMODBIT_ALTGR_LOCK)
-#define KEYMOD_SHL3_LOCK                                        (1 << KEYMODBIT_SHL3_LOCK)
-#define KEYMOD_MOD6_LOCK                                        (1 << KEYMODBIT_MOD6_LOCK)
-#define KEYMOD_MOD7_LOCK                                        (1 << KEYMODBIT_MOD7_LOCK)
-#define KEYMOD_MOD8_LOCK                                        (1 << KEYMODBIT_MOD8_LOCK)
-
-#define KEYMOD_CAPS_LOCK                                        (1 << KEYMODBIT_CAPS_LOCK)
-#define KEYMOD_NUM_LOCK                                         (1 << KEYMODBIT_NUM_LOCK)
-#define KEYMOD_SCROLL_LOCK                                      (1 << KEYMODBIT_SCROLL_LOCK)
-
-/*
- * Keyboard flags
- */
-#define KEY_DOWN                                                0x00000001      /* Key was pressed down */
-#define KEY_REPEAT                                              0x00000002      /* Key was repeated */
-#define KEY_SCAN_VALID                                          0x00000020      /* Scancode is valid */
-#define KEY_SYM_VALID                                           0x00000040      /* Key symbol is valid */
-#define KEY_CAP_VALID                                           0x00000080      /* Key cap is valid */
-#define KEY_DEAD                                                0x40000000      /* Key symbol is a DEAD key */
-#define KEY_OEM_CAP                                             0x80000000      /* Key cap is an OEM scan code from keyboard */
-
-#endif  /* __QNXNTO__ */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c
deleted file mode 100644
index c993ee0837..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c
+++ /dev/null
@@ -1,891 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "mtrr.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <termios.h>
-#include <fcntl.h>
-#include <malloc.h>
-#include <sys/mman.h>
-#include "qnx/vbios.h"
-#ifndef __QNXNTO__
-#include <sys/seginfo.h>
-#include <sys/console.h>
-#include <conio.h>
-#include <i86.h>
-#else
-#include <sys/neutrino.h>
-#include <sys/dcmd_chr.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-static uint VESABuf_len = 1024;     /* Length of the VESABuf buffer     */
-static void *VESABuf_ptr = NULL;    /* Near pointer to VESABuf          */
-static uint VESABuf_rseg;           /* Real mode segment of VESABuf     */
-static uint VESABuf_roff;           /* Real mode offset of VESABuf      */
-static VBIOSregs_t  *VRegs = NULL;  /* Pointer to VBIOS registers       */
-static int raw_count = 0;
-static struct _console_ctrl *cc = NULL;
-static int console_count = 0;
-static int rmbuf_inuse = 0;
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void PMAPI PM_init(void)
-{
-    char *force;
-
-    if (VRegs == NULL) {
-#ifdef  __QNXNTO__
-	ThreadCtl(_NTO_TCTL_IO, 0); /* Get IO privilidge */
-#endif
-	force = getenv("VBIOS_METHOD");
-	VRegs = VBIOSinit(force ? atoi(force) : 0);
-	}
-#ifndef  __QNXNTO__
-    MTRR_init();
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return VRegs != NULL; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_QNX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '/') {
-	s[pos] = '/';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    fprintf(stderr,"%s\n", msg);
-    exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
-    if (VESABuf_ptr)
-	PM_freeRealSeg(VESABuf_ptr);
-    VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	atexit(ExitVBEBuf);
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-static int term_raw(void)
-{
-    struct termios  termios_p;
-
-    if (raw_count++ > 0)
-	return 0;
-
-    /* Go into "raw" input mode */
-    if (tcgetattr(STDIN_FILENO, &termios_p))
-	return -1;
-
-    termios_p.c_cc[VMIN] =  1;
-    termios_p.c_cc[VTIME] =  0;
-    termios_p.c_lflag &= ~( ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL);
-    tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p);
-    return 0;
-}
-
-static void term_restore(void)
-{
-    struct termios  termios_p;
-
-    if (raw_count-- != 1)
-	return;
-
-    tcgetattr(STDIN_FILENO, &termios_p);
-    termios_p.c_lflag |= (ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL);
-    termios_p.c_oflag |= (OPOST);
-    tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p);
-}
-
-int PMAPI PM_kbhit(void)
-{
-    int blocking, c;
-
-    if (term_raw() == -1)
-	return 0;
-
-    /* Go into non blocking mode */
-    blocking = fcntl(STDIN_FILENO, F_GETFL) | O_NONBLOCK;
-    fcntl(STDIN_FILENO, F_SETFL, blocking);
-    c = getc(stdin);
-
-    /* restore blocking mode */
-    fcntl(STDIN_FILENO, F_SETFL, blocking & ~O_NONBLOCK);
-    term_restore();
-    if (c != EOF) {
-	ungetc(c, stdin);
-	return c;
-	}
-    clearerr(stdin);
-    return 0;
-}
-
-int PMAPI PM_getch(void)
-{
-    int c;
-
-    if (term_raw() == -1)
-	return (0);
-    c = getc(stdin);
-#if defined(__QNX__) && !defined(__QNXNTO__)
-    if (c == 0xA)
-	c = 0x0D;
-    else if (c == 0x7F)
-	c = 0x08;
-#endif
-    term_restore();
-    return c;
-}
-
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hwndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-#ifndef __QNXNTO__
-    int fd;
-
-    if (console_count++)
-	return 0;
-    if ((fd = open("/dev/con1", O_RDWR)) == -1)
-	return -1;
-    cc = console_open(fd, O_RDWR);
-    close(fd);
-    if (cc == NULL)
-	return -1;
-#endif
-    return 1;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    return PM_getVGAStateSize() + sizeof(int) * 3;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
-#ifdef __QNXNTO__
-    int     fd;
-    int     flags;
-
-    if ((fd = open("/dev/con1", O_RDWR)) == -1)
-	return;
-    flags = _CONCTL_INVISIBLE_CHG | _CONCTL_INVISIBLE;
-    devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0);
-    close(fd);
-#else
-    uchar   *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()];
-
-    /* Save QNX 4 console state */
-    console_read(cc, -1, 0, NULL, 0,
-	(int *)buf+1, (int *)buf+2, NULL);
-    *(int *)buf = console_ctrl(cc, -1,
-	CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE,
-	CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE);
-
-    /* Save state of VGA registers */
-    PM_saveVGAState(stateBuf);
-#endif
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
-    /* TODO: Implement support for console switching if possible */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
-#ifdef __QNXNTO__
-    int     fd;
-    int     flags;
-
-    if ((fd = open("/dev/con1", O_RDWR)) == -1)
-	return;
-    flags = _CONCTL_INVISIBLE_CHG;
-    devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0);
-    close(fd);
-#else
-    uchar   *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()];
-
-    /* Restore the state of the VGA compatible registers */
-    PM_restoreVGAState(stateBuf);
-
-    /* Restore QNX 4 console state */
-    console_ctrl(cc, -1, *(int *)buf,
-	CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE);
-    console_write(cc, -1, 0, NULL, 0,
-	(int *)buf+1, (int *)buf+2, NULL);
-#endif
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
-#ifndef __QNXNTO__
-    if (--console_count == 0) {
-	console_close(cc);
-	cc = NULL;
-	}
-#endif
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
-    if (!cc)
-	return;
-#ifndef __QNXNTO__
-    console_write(cc, -1, 0, NULL, 0, &y, &x, NULL);
-#endif
-}
-
-void PM_setOSScreenWidth(int width,int height)
-{
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
-    /* TODO: Implement this for QNX */
-    return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
-    /* TODO: Implement this for QNX */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* TODO: Implement this for QNX */
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    char *env = getenv("NUCLEUS_PATH");
-#ifdef __QNXNTO__
-#ifdef __X86__
-    return env ? env : "/nto/scitech/x86/bin";
-#elif defined (__PPC__)
-    return env ? env : "/nto/scitech/ppcbe/bin";
-#elif defined (__MIPS__)
-#ifdef __BIGENDIAN__
-    return env ? env : "/nto/scitech/mipsbe/bin";
-#else
-    return env ? env : "/nto/scitech/mipsle/bin";
-#endif
-#elif defined (__SH__)
-#ifdef __BIGENDIAN__
-    return env ? env : "/nto/scitech/shbe/bin";
-#else
-    return env ? env : "/nto/scitech/shle/bin";
-#endif
-#elif defined (__ARM__)
-    return env ? env : "/nto/scitech/armle/bin";
-#endif
-#else   /* QNX 4 */
-    return env ? env : "/qnx4/scitech/bin";
-#endif
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[512];
-    char        *env;
-#ifdef __QNXNTO__
-    char temp[64];
-    gethostname(temp, sizeof (temp));
-    temp[sizeof (temp) - 1] = '\0';     /* Paranoid */
-    sprintf(path,"/etc/config/scitech/%s/config", temp);
-#else
-    sprintf(path,"/etc/config/scitech/%d/config", getnid());
-#endif
-    if ((env = getenv("NUCLEUS_PATH")) != NULL) {
-	strcpy(path,env);
-	PM_backslash(path);
-	strcat(path,"config");
-	}
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
-    static char buf[128];
-#ifdef __QNXNTO__
-    gethostname(buf, sizeof (buf));
-#else
-    sprintf(buf,"node%d", getnid());
-#endif
-    return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
-    static char buf[128];
-#ifdef __QNXNTO__
-    gethostname(buf, sizeof (buf));
-#else
-    sprintf(buf,"node%d", getnid());
-#endif
-    return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
-    return PM_mapRealPointer(0, 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
-    static void *ptr = NULL;
-    void *freeptr;
-    unsigned offset, i, maplen;
-
-    if (ptr != NULL)
-	return ptr;
-
-    /* Some trickery is required to get the linear address 64K aligned */
-    for (i = 0; i < 5; i++) {
-	ptr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-	offset = 0x10000 - ((unsigned)ptr % 0x10000);
-	if (!offset)
-	    break;
-	munmap(ptr, 0x10000);
-	maplen = 0x10000 + offset;
-	freeptr = PM_mapPhysicalAddr(0xA0000-offset, maplen-1,true);
-	ptr = (void *)(offset + (unsigned)freeptr);
-	if (0x10000 - ((unsigned)ptr % 0x10000))
-	    break;
-	munmap(freeptr, maplen);
-	}
-    if (i == 5) {
-	printf("Could not get a 64K aligned linear address for A0000 region\n");
-	exit(1);
-	}
-    return ptr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    uchar_t *p;
-    unsigned o;
-    unsigned prot = PROT_READ|PROT_WRITE|(isCached?0:PROT_NOCACHE);
-#ifdef __PAGESIZE
-    int pagesize = __PAGESIZE;
-#else
-    int pagesize = 4096;
-#endif
-    int rounddown = base % pagesize;
-#ifndef __QNXNTO__
-    static int __VidFD = -1;
-#endif
-
-    if (rounddown) {
-	if (base < rounddown)
-	    return NULL;
-	base -= rounddown;
-	limit += rounddown;
-	}
-
-#ifndef __QNXNTO__
-    if (__VidFD < 0) {
-	if ((__VidFD = shm_open( "Physical", O_RDWR, 0777 )) == -1) {
-	    perror( "Cannot open Physical memory" );
-	    exit(1);
-	    }
-	}
-    o = base & 0xFFF;
-    limit = (limit + o + 0xFFF) & ~0xFFF;
-    if ((int)(p = mmap( 0, limit, prot, MAP_SHARED,
-	    __VidFD, base )) == -1 ) {
-	return NULL;
-	}
-    p += o;
-#else
-    if ((p = mmap(0, limit, prot, MAP_PHYS | MAP_SHARED,
-	    NOFD, base)) == MAP_FAILED) {
-	return (void *)-1;
-	}
-#endif
-    return (p + rounddown);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    munmap(ptr,limit+1);
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    /* TODO: Implement this! */
-    return false;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
-    return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
-    PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    void *p;
-
-    PM_init();
-
-    if ((p = VBIOSgetmemptr(r_seg, r_off, VRegs)) == (void *)-1)
-	return NULL;
-    return p;
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    if (size > 1024) {
-	printf("PM_allocRealSeg: can't handle %d bytes\n", size);
-	return 0;
-	}
-    if (rmbuf_inuse != 0) {
-	printf("PM_allocRealSeg: transfer area already in use\n");
-	return 0;
-	}
-    PM_init();
-    rmbuf_inuse = 1;
-    *r_seg = VBIOS_TransBufVSeg(VRegs);
-    *r_off = VBIOS_TransBufVOff(VRegs);
-    return (void*)VBIOS_TransBufPtr(VRegs);
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    if (rmbuf_inuse == 0) {
-	printf("PM_freeRealSeg: nothing was allocated\n");
-	return;
-	}
-    rmbuf_inuse = 0;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return;
-
-    VRegs->l.eax = regs->eax;
-    VRegs->l.ebx = regs->ebx;
-    VRegs->l.ecx = regs->ecx;
-    VRegs->l.edx = regs->edx;
-    VRegs->l.esi = regs->esi;
-    VRegs->l.edi = regs->edi;
-
-    VBIOSint(intno, VRegs, 1024);
-
-    regs->eax = VRegs->l.eax;
-    regs->ebx = VRegs->l.ebx;
-    regs->ecx = VRegs->l.ecx;
-    regs->edx = VRegs->l.edx;
-    regs->esi = VRegs->l.esi;
-    regs->edi = VRegs->l.edi;
-    regs->flags = VRegs->w.flags & 0x1;
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return 0;
-
-    VRegs->l.eax = in->e.eax;
-    VRegs->l.ebx = in->e.ebx;
-    VRegs->l.ecx = in->e.ecx;
-    VRegs->l.edx = in->e.edx;
-    VRegs->l.esi = in->e.esi;
-    VRegs->l.edi = in->e.edi;
-
-    VBIOSint(intno, VRegs, 1024);
-
-    out->e.eax = VRegs->l.eax;
-    out->e.ebx = VRegs->l.ebx;
-    out->e.ecx = VRegs->l.ecx;
-    out->e.edx = VRegs->l.edx;
-    out->e.esi = VRegs->l.esi;
-    out->e.edi = VRegs->l.edi;
-    out->x.cflag = VRegs->w.flags & 0x1;
-
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return 0;
-
-    if (intno == 0x21) {
-	time_t today = time(NULL);
-	struct tm *t;
-	t = localtime(&today);
-	out->x.cx = t->tm_year + 1900;
-	out->h.dh = t->tm_mon + 1;
-	out->h.dl = t->tm_mday;
-	return 0;
-	}
-    else {
-	VRegs->l.eax = in->e.eax;
-	VRegs->l.ebx = in->e.ebx;
-	VRegs->l.ecx = in->e.ecx;
-	VRegs->l.edx = in->e.edx;
-	VRegs->l.esi = in->e.esi;
-	VRegs->l.edi = in->e.edi;
-	VRegs->w.es = sregs->es;
-	VRegs->w.ds = sregs->ds;
-
-	VBIOSint(intno, VRegs, 1024);
-
-	out->e.eax = VRegs->l.eax;
-	out->e.ebx = VRegs->l.ebx;
-	out->e.ecx = VRegs->l.ecx;
-	out->e.edx = VRegs->l.edx;
-	out->e.esi = VRegs->l.esi;
-	out->e.edi = VRegs->l.edi;
-	out->x.cflag = VRegs->w.flags & 0x1;
-	sregs->es = VRegs->w.es;
-	sregs->ds = VRegs->w.ds;
-
-	return out->x.ax;
-	}
-}
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
-    RMSREGS *sregs)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return;
-
-    VRegs->l.eax = in->e.eax;
-    VRegs->l.ebx = in->e.ebx;
-    VRegs->l.ecx = in->e.ecx;
-    VRegs->l.edx = in->e.edx;
-    VRegs->l.esi = in->e.esi;
-    VRegs->l.edi = in->e.edi;
-    VRegs->w.es = sregs->es;
-    VRegs->w.ds = sregs->ds;
-
-    VBIOScall(seg, off, VRegs, 1024);
-
-    in->e.eax = VRegs->l.eax;
-    in->e.ebx = VRegs->l.ebx;
-    in->e.ecx = VRegs->l.ecx;
-    in->e.edx = VRegs->l.edx;
-    in->e.esi = VRegs->l.esi;
-    in->e.edi = VRegs->l.edi;
-    in->x.cflag = VRegs->w.flags & 0x1;
-    sregs->es = VRegs->w.es;
-    sregs->ds = VRegs->w.ds;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-#ifndef __QNXNTO__
-    *physical = *total = _memavl();
-#endif
-}
-
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    /* TODO: Implement this on QNX */
-    return NULL;
-}
-
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    /* TODO: Implement this on QNX */
-}
-
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    /* TODO: Implement this on QNX */
-    return NULL;
-}
-
-void PMAPI PM_freePage(
-    void *p)
-{
-    /* TODO: Implement this on QNX */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return;
-
-    VRegs->l.eax = 0x4F05;
-    VRegs->l.ebx = 0x0000;
-    VRegs->l.edx = bank;
-    VBIOSint(0x10, VRegs, 1024);
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return;
-
-    VRegs->l.eax = 0x4F05;
-    VRegs->l.ebx = 0x0000;
-    VRegs->l.edx = bank;
-    VBIOSint(0x10, VRegs, 1024);
-
-    VRegs->l.eax = 0x4F05;
-    VRegs->l.ebx = 0x0001;
-    VRegs->l.edx = bank;
-    VBIOSint(0x10, VRegs, 1024);
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
-    PM_init();
-    if (VRegs == NULL)
-	return;
-
-    VRegs->l.eax = 0x4F07;
-    VRegs->l.ebx = waitVRT;
-    VRegs->l.ecx = x;
-    VRegs->l.edx = y;
-    VBIOSint(0x10, VRegs, 1024);
-}
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *copyOfBIOS,
-    ulong BIOSLen)
-{
-    (void)axVal;
-    (void)BIOSPhysAddr;
-    (void)copyOfBIOS;
-    (void)BIOSLen;
-    return false;
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    p = p;  len = len;
-    return 1;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* TODO: Implement this to load shared libraries! */
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
-    int level)
-{
-    /* QNX handles IOPL selection at the program link level. */
-    return level;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-#ifndef  __QNXNTO__
-    return MTRR_enableWriteCombine(base,size,type);
-#else
-    return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c
deleted file mode 100644
index d2740971f9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  QNX
-*
-* Description:  QNX specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Use the gettimeofday() function to get microsecond precision (probably less
-though)
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    struct timespec ts;
-    clock_gettime(CLOCK_REALTIME, &ts);
-    return (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm)     tm->start.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-#define __LZTimerLap(tm)        (__ULZReadTime() - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)        tm->end.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm)  (tm->end.low - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c
deleted file mode 100644
index 4f32c3e887..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  Module to implement OS specific services to measure the
-*               CPU frequency.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ibool havePerformanceCounter;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
-    int     oldPriority;
-    HANDLE  hThread = GetCurrentThread();
-
-    oldPriority = GetThreadPriority(hThread);
-    if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
-	SetThreadPriority(hThread, THREAD_PRIORITY_TIME_CRITICAL);
-    return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
-    int oldPriority)
-{
-    HANDLE  hThread = GetCurrentThread();
-
-    if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
-	SetThreadPriority(hThread, oldPriority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    if (!QueryPerformanceFrequency((LARGE_INTEGER*)freq)) {
-	havePerformanceCounter = false;
-	freq->low = 100000;
-	freq->high = 0;
-	}
-    else
-	havePerformanceCounter = true;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                                       \
-{                                                           \
-    if (havePerformanceCounter)                             \
-	QueryPerformanceCounter((LARGE_INTEGER*)t);         \
-    else {                                                  \
-	(t)->low = timeGetTime() * 100;                     \
-	(t)->high = 0;                                      \
-	}                                                   \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c
deleted file mode 100644
index 962a14a3c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  Win32 implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort   keyUpMsg[256] = {0};    /* Table of key up messages     */
-static int      rangeX,rangeY;          /* Range of mouse coordinates   */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Win32 */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Win32 into our event queue.
-****************************************************************************/
-void _EVT_pumpMessages(void)
-{
-    MSG     msg;
-    MSG     charMsg;
-    event_t evt;
-
-    while (PeekMessage(&msg,NULL,0,0,PM_REMOVE)) {
-	memset(&evt,0,sizeof(evt));
-	switch (msg.message) {
-	    case WM_MOUSEMOVE:
-		evt.what = EVT_MOUSEMOVE;
-		break;
-	    case WM_LBUTTONDBLCLK:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_LEFTBMASK | EVT_DBLCLICK;
-		break;
-	    case WM_LBUTTONDOWN:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_LEFTBMASK;
-		break;
-	    case WM_LBUTTONUP:
-		evt.what = EVT_MOUSEUP;
-		evt.message = EVT_LEFTBMASK;
-		break;
-	    case WM_RBUTTONDBLCLK:
-		evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_RBUTTONDOWN:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_RBUTTONUP:
-		evt.what = EVT_MOUSEUP;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_KEYDOWN:
-	    case WM_SYSKEYDOWN:
-		if (HIWORD(msg.lParam) & KF_REPEAT) {
-		    evt.what = EVT_KEYREPEAT;
-		    }
-		else {
-		    evt.what = EVT_KEYDOWN;
-		    }
-		break;
-	    case WM_KEYUP:
-	    case WM_SYSKEYUP:
-		evt.what = EVT_KEYUP;
-		break;
-	    }
-
-	/* Convert mouse event modifier flags */
-	if (evt.what & EVT_MOUSEEVT) {
-	    evt.where_x = msg.pt.x;
-	    evt.where_y = msg.pt.y;
-	    if (evt.what == EVT_MOUSEMOVE) {
-		if (oldMove != -1) {
-		    evtq[oldMove].where_x = evt.where_x;/* Modify existing one  */
-		    evtq[oldMove].where_y = evt.where_y;
-		    evt.what = 0;
-		    }
-		else {
-		    oldMove = freeHead; /* Save id of this move event   */
-		    }
-		}
-	    else
-		oldMove = -1;
-	    if (msg.wParam & MK_LBUTTON)
-		evt.modifiers |= EVT_LEFTBUT;
-	    if (msg.wParam & MK_RBUTTON)
-		evt.modifiers |= EVT_RIGHTBUT;
-	    if (msg.wParam & MK_SHIFT)
-		evt.modifiers |= EVT_SHIFTKEY;
-	    if (msg.wParam & MK_CONTROL)
-		evt.modifiers |= EVT_CTRLSTATE;
-	    }
-
-	/* Convert keyboard codes */
-	TranslateMessage(&msg);
-	if (evt.what & EVT_KEYEVT) {
-	    int scanCode = (msg.lParam >> 16) & 0xFF;
-	    if (evt.what == EVT_KEYUP) {
-		/* Get message for keyup code from table of cached down values */
-		evt.message = keyUpMsg[scanCode];
-		keyUpMsg[scanCode] = 0;
-		}
-	    else {
-		if (PeekMessage(&charMsg,NULL,WM_CHAR,WM_CHAR,PM_REMOVE))
-		    evt.message = charMsg.wParam;
-		if (PeekMessage(&charMsg,NULL,WM_SYSCHAR,WM_SYSCHAR,PM_REMOVE))
-		    evt.message = charMsg.wParam;
-		evt.message |= ((msg.lParam >> 8) & 0xFF00);
-		keyUpMsg[scanCode] = (ushort)evt.message;
-		}
-	    if (evt.what == EVT_KEYREPEAT)
-		evt.message |= (msg.lParam << 16);
-	    if (HIWORD(msg.lParam) & KF_ALTDOWN)
-		evt.modifiers |= EVT_ALTSTATE;
-	    if (GetKeyState(VK_SHIFT) & 0x8000U)
-		evt.modifiers |= EVT_SHIFTKEY;
-	    if (GetKeyState(VK_CONTROL) & 0x8000U)
-		evt.modifiers |= EVT_CTRLSTATE;
-	    oldMove = -1;
-	    }
-
-	if (evt.what != 0) {
-	    /* Add time stamp and add the event to the queue */
-	    evt.when = msg.time;
-	    if (count < EVENTQSIZE) {
-		addEvent(&evt);
-		}
-	    }
-	DispatchMessage(&msg);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    /* Initialise the event queue */
-    _mouseMove = mouseMove;
-    initEventQueue();
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
-    int *x,
-    int *y)
-{
-    SetCursorPos(*x,*y);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h
deleted file mode 100644
index 1352dadad6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c
deleted file mode 100644
index 47d7ed6ab1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#ifdef  __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-static void     (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void MTRR_init(void);
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    /* TODO: dO any special init code in here. */
-    MTRR_init();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
-    return _OS_RTTARGET;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
-    return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
-    char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
-    const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    /* TODO: Display a fatal error message and exit! */
-/*  MessageBox(NULL,msg,"Fatal Error!", MB_ICONEXCLAMATION); */
-    exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    /* No BIOS access for the RTTarget */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
-    /* TODO: Need to check if a key is waiting on the keyboard queue */
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
-    /* TODO: Need to obtain the next keypress, and block until one is hit */
-    return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    /* Nothing to do for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    /* Nothing to do for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
-    PM_intHandler ih,
-    int frequency)
-{
-    /* Not supported for RTTarget-32 */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    /* Not supported under RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* Not supported under RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
-    return 'c';
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
-    /* TODO: Point this at the path when the Nucleus drivers will be found */
-    return "c:\\nucleus";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
-    return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
-    /* Not necessary for RTTarget-32 */
-    return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
-    /* Not used for RTTarget-32 */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
-    static void *bankPtr;
-    if (!bankPtr)
-	bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-    return bankPtr;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    /* TODO: Map a physical memory address to a linear address */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    /* TODO: Free the physical address mapping */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    Sleep(milliseconds);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of (unnamed) shared memory.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    return PM_malloc(size);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
-    void *ptr)
-{
-    PM_free(ptr);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    /* Not used for RTTarget-32 */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    /* Not used for RTTarget-32 */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    /* Not used for RTTarget-32 */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    /* Not used for RTTarget-32 */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    /* TODO: Figure out how to determine the available memory. Not entirely */
-    /*       critical so returning 0 is OK. */
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    /* TODO: Allocate a block of locked, phsyically contigous memory for DMA */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-
-    ibool contiguous)
-{
-    /* TODO: Free a locked memory buffer */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
-    int bank)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
-    int bank)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
-    int x,
-    int y,
-    int waitVRT)
-{
-    /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS)
-{
-    /* Not used for RTTarget-32 */
-    return false;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* TODO: Implement this to load shared libraries! */
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* TODO: Implement this! */
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-ulong PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    /* TODO: This function should start a directory enumeration search */
-    /*       given the filename (with wildcards). The data should be */
-    /*       converted and returned in the findData standard form. */
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    ulong handle,
-    PM_findData *findData)
-{
-    /* TODO: This function should find the next file in directory enumeration */
-    /*       search given the search criteria defined in the call to */
-    /*       PM_findFirstFile. The data should be converted and returned */
-    /*       in the findData standard form. */
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    ulong handle)
-{
-    /* TODO: This function should close the find process. This may do */
-    /*       nothing for some OS'es. */
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    if (drive == 3)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    (void)drive;
-    getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    /* TODO: Set the file attributes for a file */
-    (void)filename;
-    (void)attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    return mkdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return rmdir(filename) == 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c
deleted file mode 100644
index dd9dfe6826..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifdef  __BORLANDC__
-#pragma warn -par
-#endif
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c
deleted file mode 100644
index 80c184dff1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  RTTarget-32
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ibool            havePerformanceCounter;
-static ulong            start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-#ifdef  NO_ASSEMBLER
-    havePerformanceCounter = false;
-#else
-    havePerformanceCounter = QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
-    LZTimerObject *tm)
-{
-    if (havePerformanceCounter)
-	QueryPerformanceCounter((LARGE_INTEGER*)&tm->start);
-    else
-	tm->start.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmLap,tmCount;
-
-    if (havePerformanceCounter) {
-	QueryPerformanceCounter((LARGE_INTEGER*)&tmLap);
-	_CPU_diffTime64(&tm->start,&tmLap,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,countFreq.low);
-	}
-    else {
-	tmLap.low = timeGetTime();
-	return (tmLap.low - tm->start.low) * 1000L;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
-    LZTimerObject *tm)
-{
-    if (havePerformanceCounter)
-	QueryPerformanceCounter((LARGE_INTEGER*)&tm->end);
-    else
-	tm->end.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmCount;
-
-    if (havePerformanceCounter) {
-	_CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,countFreq.low);
-	}
-    else
-	return (tm->end.low - tm->start.low) * 1000L;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm
deleted file mode 100644
index da62b1f712..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm
+++ /dev/null
@@ -1,175 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech Multi-platform Graphics Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Assembly language support routines for the event module.
-;*
-;****************************************************************************
-
-        ideal
-
-include "scitech.mac"           ; Memory model macros
-
-ifdef flatmodel
-
-header  _event                  ; Set up memory model
-
-begdataseg  _event
-
-    cextern  _EVT_biosPtr,DPTR
-
-    cpublic _EVT_dataStart
-
-ifdef   USE_NASM
-%define KB_HEAD     WORD esi+01Ah   ; Keyboard buffer head in BIOS data area
-%define KB_TAIL     WORD esi+01Ch   ; Keyboard buffer tail in BIOS data area
-%define KB_START    WORD esi+080h   ; Start of keyboard buffer in BIOS data area
-%define KB_END      WORD esi+082h   ; End of keyboard buffer in BIOS data area
-else
-KB_HEAD     EQU WORD esi+01Ah       ; Keyboard buffer head in BIOS data area
-KB_TAIL     EQU WORD esi+01Ch       ; Keyboard buffer tail in BIOS data area
-KB_START    EQU WORD esi+080h       ; Start of keyboard buffer in BIOS data area
-KB_END      EQU WORD esi+082h       ; End of keyboard buffer in BIOS data area
-endif
-
-    cpublic _EVT_dataEnd
-
-enddataseg  _event
-
-begcodeseg  _event              ; Start of code segment
-
-    cpublic _EVT_codeStart
-
-;----------------------------------------------------------------------------
-; int _EVT_getKeyCode(void)
-;----------------------------------------------------------------------------
-; Returns the key code for the next available key by extracting it from
-; the BIOS keyboard buffer.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_getKeyCode
-
-        enter_c
-
-        mov     esi,[_EVT_biosPtr]
-        xor     ebx,ebx
-        xor     eax,eax
-        mov     bx,[KB_HEAD]
-        cmp     bx,[KB_TAIL]
-        jz      @@Done
-        xor     eax,eax
-        mov     ax,[esi+ebx]    ; EAX := character from keyboard buffer
-        inc     _bx
-        inc     _bx
-        cmp     bx,[KB_END]     ; Hit the end of the keyboard buffer?
-        jl      @@1
-        mov     bx,[KB_START]
-@@1:    mov     [KB_HEAD],bx    ; Update keyboard buffer head pointer
-
-@@Done: leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_disableInt
-
-        pushf                   ; Put flag word on stack
-        cli                     ; Disable interrupts!
-        pop     eax             ; deposit flag word in return register
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_restoreInt(int ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart  _EVT_restoreInt
-
-        ARG     ps:UINT
-
-        push    ebp
-        mov     ebp,esp         ; Set up stack frame
-        push    [DWORD ps]
-        popf                    ; Restore processor status (and interrupts)
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int EVT_rdinx(int port,int index)
-;----------------------------------------------------------------------------
-; Reads an indexed register value from an I/O port.
-;----------------------------------------------------------------------------
-cprocstart  EVT_rdinx
-
-        ARG     port:UINT, index:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     edx,[port]
-        mov     al,[BYTE index]
-        out     dx,al
-        inc     dx
-        in      al,dx
-        movzx   eax,al
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void EVT_wrinx(int port,int index,int value)
-;----------------------------------------------------------------------------
-; Writes an indexed register value to an I/O port.
-;----------------------------------------------------------------------------
-cprocstart  EVT_wrinx
-
-        ARG     port:UINT, index:UINT, value:UINT
-
-        push    ebp
-        mov     ebp,esp
-        mov     edx,[port]
-        mov     al,[BYTE index]
-        mov     ah,[BYTE value]
-        out     dx,ax
-        pop     ebp
-        ret
-
-cprocend
-
-    cpublic _EVT_codeEnd
-
-endcodeseg  _event
-
-endif
-
-        END                         ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm
deleted file mode 100644
index 068eea65d2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm
+++ /dev/null
@@ -1,58 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    NASM or TASM Assembler
-;* Environment: smx 32 bit intel CPU
-;*
-;* Description: SMX does not support 486's, so this module is not necessary.
-;*
-;*  All registers and all flags are preserved by all routines, except
-;*  interrupts which are always turned on
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"
-
-header      _lztimer
-
-begdataseg  _lztimer
-
-enddataseg  _lztimer
-
-begcodeseg  _lztimer                ; Start of code segment
-
-cprocstart   LZ_disable
-        cli
-        ret
-cprocend
-
-cprocstart   LZ_enable
-        sti
-        ret
-cprocend
-
-endcodeseg  _lztimer
-
-        END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm
deleted file mode 100644
index 1c7cb21864..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm
+++ /dev/null
@@ -1,448 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit SMX embedded systems development
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              SMX.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pm                     ; Set up memory model
-
-begdataseg  _pm
-
-    cextern _PM_savedDS,USHORT
-
-intel_id        db  "GenuineIntel"  ; Intel vendor ID
-
-enddataseg  _pm
-
-begcodeseg  _pm                 ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_segread
-
-        ARG     sregs:DPTR
-
-        enter_c
-
-        mov     ax,es
-        _les    _si,[sregs]
-        mov     [_ES _si],ax
-        mov     [_ES _si+2],cs
-        mov     [_ES _si+4],ss
-        mov     [_ES _si+6],ds
-        mov     [_ES _si+8],fs
-        mov     [_ES _si+10],gs
-
-        leave_c
-        ret
-
-cprocend
-
-; Create a table of the 256 different interrupt calls that we can jump
-; into
-
-ifdef   USE_NASM
-
-%assign intno 0
-
-intTable:
-%rep    256
-        db      0CDh
-        db      intno
-%assign intno   intno + 1
-        ret
-        nop
-%endrep
-
-else
-
-intno = 0
-
-intTable:
-        REPT    256
-        db      0CDh
-        db      intno
-intno = intno + 1
-        ret
-        nop
-        ENDM
-
-endif
-
-;----------------------------------------------------------------------------
-; _PM_genInt    - Generate the appropriate interrupt
-;----------------------------------------------------------------------------
-cprocnear   _PM_genInt
-
-        push    _ax                     ; Save _ax
-        push    _bx                     ; Save _bx
-        mov     ebx,[UINT esp+12]       ; EBX := interrupt number
-        mov     _ax,offset intTable     ; Point to interrupt generation table
-        shl     _bx,2                   ; _BX := index into table
-        add     _ax,_bx                 ; _AX := pointer to interrupt code
-        xchg    eax,[esp+4]             ; Restore eax, and set for int
-        pop     _bx                     ; restore _bx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_int386x
-
-        ARG     intno:UINT, inptr:DPTR, outptr:DPTR, sregs:DPTR
-
-        LOCAL   flags:UINT, sv_ds:UINT, sv_esi:ULONG = LocalSize
-
-        enter_c
-        push    ds
-        push    es                  ; Save segment registers
-        push    fs
-        push    gs
-
-        _lds    _si,[sregs]         ; DS:_SI -> Load segment registers
-        mov     es,[_si]
-        mov     bx,[_si+6]
-        mov     [sv_ds],_bx         ; Save value of user DS on stack
-        mov     fs,[_si+8]
-        mov     gs,[_si+10]
-
-        _lds    _si,[inptr]         ; Load CPU registers
-        mov     eax,[_si]
-        mov     ebx,[_si+4]
-        mov     ecx,[_si+8]
-        mov     edx,[_si+12]
-        mov     edi,[_si+20]
-        mov     esi,[_si+16]
-
-        push    ds                  ; Save value of DS
-        push    _bp                 ; Some interrupts trash this!
-        clc                         ; Generate the interrupt
-        push    [UINT intno]
-        mov     ds,[WORD sv_ds]     ; Set value of user's DS selector
-        call    _PM_genInt
-        pop     _bp                 ; Pop intno from stack (flags unchanged)
-        pop     _bp                 ; Restore value of stack frame pointer
-        pop     ds                  ; Restore value of DS
-
-        pushf                       ; Save flags for later
-        pop     [UINT flags]
-        push    esi                 ; Save ESI for later
-        pop     [DWORD sv_esi]
-        push    ds                  ; Save DS for later
-        pop     [UINT sv_ds]
-
-        _lds    _si,[outptr]        ; Save CPU registers
-        mov     [_si],eax
-        mov     [_si+4],ebx
-        mov     [_si+8],ecx
-        mov     [_si+12],edx
-        push    [DWORD sv_esi]
-        pop     [DWORD _si+16]
-        mov     [_si+20],edi
-
-        mov     _bx,[flags]         ; Return flags
-        and     ebx,1h              ; Isolate carry flag
-        mov     [_si+24],ebx        ; Save carry flag status
-
-        _lds    _si,[sregs]         ; Save segment registers
-        mov     [_si],es
-        mov     _bx,[sv_ds]
-        mov     [_si+6],bx          ; Get returned DS from stack
-        mov     [_si+8],fs
-        mov     [_si+10],gs
-
-        pop     gs                  ; Restore segment registers
-        pop     fs
-        pop     es
-        pop     ds
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_saveDS
-
-        mov     [_PM_savedDS],ds    ; Store away in data segment
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_loadDS
-
-        mov     ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankA
-
-        ARG     bank:UINT
-
-        push    ebp
-        mov     ebp,esp
-        push    ebx
-        mov     _bx,0
-        mov     _ax,4F05h
-        mov     _dx,[bank]
-        int     10h
-        pop     ebx
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankAB
-
-        ARG     bank:UINT
-
-        push    ebp
-        mov     ebp,esp
-        push    ebx
-        mov     _bx,0
-        mov     _ax,4F05h
-        mov     _dx,[bank]
-        int     10h
-        mov     _bx,1
-        mov     _ax,4F05h
-        mov     _dx,[bank]
-        int     10h
-        pop     ebx
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart      PM_setCRTStart
-
-        ARG     x:UINT, y:UINT, waitVRT:UINT
-
-        push    ebp
-        mov     ebp,esp
-        push    ebx
-        mov     _bx,[waitVRT]
-        mov     _cx,[x]
-        mov     _dx,[y]
-        mov     _ax,4F07h
-        int     10h
-        pop     ebx
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _PM_inp(int port)
-;----------------------------------------------------------------------------
-; Reads a byte from the specified port
-;----------------------------------------------------------------------------
-cprocstart  _PM_inp
-
-        ARG     port:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        xor     _ax,_ax
-        mov     _dx,[port]
-        in      al,dx
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_outp(int port,int value)
-;----------------------------------------------------------------------------
-; Write a byte to the specified port.
-;----------------------------------------------------------------------------
-cprocstart  _PM_outp
-
-        ARG     port:UINT, value:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        mov     _dx,[port]
-        mov     _ax,[value]
-        out     dx,al
-        pop     _bp
-        ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_readCMOS
-
-        ARG     index:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-        mov     ah,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        sti
-        mov     al,ah               ; Return value in AL
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_writeCMOS
-
-        ARG     index:UINT, value:UCHAR
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        mov     al,[value]
-        out     71h,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        sti
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart  _PM_getPDB
-
-        mov     eax,cr3
-        and     eax,0FFFFF000h
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_flushTLB - Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart  PM_flushTLB
-
-        wbinvd                  ; Flush the CPU cache
-        mov     eax,cr3         
-        mov     cr3,eax         ; Flush the TLB
-        ret
-
-cprocend
-
-endcodeseg  _pm
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm
deleted file mode 100644
index 8352ce30c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm
+++ /dev/null
@@ -1,933 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit SMX embedded systems development
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              SMX interrupt handling.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"           ; Memory model macros
-
-header      _pmsmx              ; Set up memory model
-
-; Define the size of our local stacks. For real mode code they cant be
-; that big, but for 32 bit protected mode code we can make them nice and
-; large so that complex C functions can be used.
-
-MOUSE_STACK EQU 4096
-TIMER_STACK EQU 4096
-KEY_STACK   EQU 1024
-INT10_STACK EQU 1024
-
-ifdef   USE_NASM
-
-; Macro to load DS and ES registers with correct value.
-
-%imacro   LOAD_DS 0
-        mov     ds,[cs:_PM_savedDS]
-        mov     es,[cs:_PM_savedDS]
-%endmacro
-
-; Note that interrupts we disable interrupts during the following stack
-; %imacro for correct operation, but we do not enable them again. Normally
-; these %imacros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-%imacro NEWSTK  1
-        cli
-        mov     [seg_%1],ss
-        mov     [ptr_%1],_sp
-        mov     [TempSeg],ds
-        mov     ss,[TempSeg]
-        mov     _sp,offset %1
-%endmacro
-
-; %imacro to switch back to the old stack.
-
-%imacro   RESTSTK   1
-        cli
-        mov     ss,[seg_%1]
-        mov     _sp,[ptr_%1]
-%endmacro
-
-; %imacro to swap the current stack with the one saved away.
-
-%imacro SWAPSTK 1
-        cli
-        mov     ax,ss
-        xchg    ax,[seg_%1]
-        mov     ss,ax
-        xchg    _sp,[ptr_%1]
-%endmacro
-
-else
-
-; Macro to load DS and ES registers with correct value.
-
-MACRO   LOAD_DS
-        mov     ds,[cs:_PM_savedDS]
-        mov     es,[cs:_PM_savedDS]
-ENDM
-
-; Note that interrupts we disable interrupts during the following stack
-; macro for correct operation, but we do not enable them again. Normally
-; these macros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-MACRO   NEWSTK  stkname
-        cli
-        mov     [seg_&stkname&],ss
-        mov     [ptr_&stkname&],_sp
-        mov     [TempSeg],ds
-        mov     ss,[TempSeg]
-        mov     _sp,offset stkname
-ENDM
-
-; Macro to switch back to the old stack.
-
-MACRO   RESTSTK stkname
-        cli
-        mov     ss,[seg_&stkname&]
-        mov     _sp,[ptr_&stkname&]
-ENDM
-
-; Macro to swap the current stack with the one saved away.
-
-MACRO   SWAPSTK stkname
-        cli
-        mov     ax,ss
-        xchg    ax,[seg_&stkname&]
-        mov     ss,ax
-        xchg    _sp,[ptr_&stkname&]
-ENDM
-
-endif
-
-begdataseg  _pmsmx
-
-    cextern _PM_savedDS,USHORT
-    cextern _PM_critHandler,CPTR
-    cextern _PM_breakHandler,CPTR
-    cextern _PM_timerHandler,CPTR
-    cextern _PM_rtcHandler,CPTR
-    cextern _PM_keyHandler,CPTR
-    cextern _PM_key15Handler,CPTR
-    cextern _PM_mouseHandler,CPTR
-    cextern _PM_int10Handler,CPTR
-
-    cextern _PM_ctrlCPtr,DPTR
-    cextern _PM_ctrlBPtr,DPTR
-    cextern _PM_critPtr,DPTR
-
-    cextern _PM_prevTimer,FCPTR
-    cextern _PM_prevRTC,FCPTR
-    cextern _PM_prevKey,FCPTR
-    cextern _PM_prevKey15,FCPTR
-    cextern _PM_prevBreak,FCPTR
-    cextern _PM_prevCtrlC,FCPTR
-    cextern _PM_prevCritical,FCPTR
-    cextern _PM_prevRealTimer,ULONG
-    cextern _PM_prevRealRTC,ULONG
-    cextern _PM_prevRealKey,ULONG
-    cextern _PM_prevRealKey15,ULONG
-    cextern _PM_prevRealInt10,ULONG
-
-cpublic _PM_pmsmxDataStart
-
-; Allocate space for all of the local stacks that we need. These stacks
-; are not very large, but should be large enough for most purposes
-; (generally you want to handle these interrupts quickly, simply storing
-; the information for later and then returning). If you need bigger
-; stacks then change the appropriate value in here.
-
-            ALIGN   4
-            dclb MOUSE_STACK    ; Space for local stack (small)
-MsStack:                        ; Stack starts at end!
-ptr_MsStack DUINT   0           ; Place to store old stack offset
-seg_MsStack dw      0           ; Place to store old stack segment
-
-            ALIGN   4
-            dclb INT10_STACK    ; Space for local stack (small)
-Int10Stack:                     ; Stack starts at end!
-ptr_Int10Stack  DUINT   0       ; Place to store old stack offset
-seg_Int10Stack  dw      0       ; Place to store old stack segment
-
-            ALIGN   4
-            dclb TIMER_STACK    ; Space for local stack (small)
-TmStack:                        ; Stack starts at end!
-ptr_TmStack DUINT   0           ; Place to store old stack offset
-seg_TmStack dw      0           ; Place to store old stack segment
-
-            ALIGN   4
-            dclb TIMER_STACK    ; Space for local stack (small)
-RtcStack:                       ; Stack starts at end!
-ptr_RtcStack DUINT  0           ; Place to store old stack offset
-seg_RtcStack dw     0           ; Place to store old stack segment
-RtcInside   dw      0           ; Are we still handling current interrupt
-
-            ALIGN   4
-            dclb KEY_STACK      ; Space for local stack (small)
-KyStack:                        ; Stack starts at end!
-ptr_KyStack DUINT   0           ; Place to store old stack offset
-seg_KyStack dw      0           ; Place to store old stack segment
-KyInside    dw      0           ; Are we still handling current interrupt
-
-            ALIGN   4
-            dclb KEY_STACK      ; Space for local stack (small)
-Ky15Stack:                      ; Stack starts at end!
-ptr_Ky15Stack   DUINT   0       ; Place to store old stack offset
-seg_Ky15Stack   dw      0       ; Place to store old stack segment
-
-TempSeg     dw      0           ; Place to store stack segment
-
-cpublic _PM_pmsmxDataEnd
-
-enddataseg  _pmsmx
-
-begcodeseg  _pmsmx              ; Start of code segment
-
-cpublic _PM_pmsmxCodeStart
-
-;----------------------------------------------------------------------------
-; PM_mouseISR - Mouse interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt subroutine called by the mouse driver upon interrupts, to
-; dispatch control to high level C based subroutines. Interrupts are on
-; when we call the user code.
-;
-; It is _extremely_ important to save the state of the extended registers
-; as these may well be trashed by the routines called from here and not
-; restored correctly by the mouse interface module.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. For mouse handlers this is not a
-;       problem, as the mouse driver arbitrates calls to the user mouse
-;       handler for us.
-;
-; Entry:    AX  - Condition mask giving reason for call
-;           BX  - Mouse button state
-;           CX  - Horizontal cursor coordinate
-;           DX  - Vertical cursor coordinate
-;           SI  - Horizontal mickey value
-;           DI  - Vertical mickey value
-;
-;----------------------------------------------------------------------------
-cprocfar    _PM_mouseISR
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-        NEWSTK  MsStack         ; Switch to local stack
-
-; Call the installed high level C code routine
-
-        clrhi   dx              ; Clear out high order values
-        clrhi   cx
-        clrhi   bx
-        clrhi   ax
-        sgnhi   si
-        sgnhi   di
-
-        push    _di
-        push    _si
-        push    _dx
-        push    _cx
-        push    _bx
-        push    _ax
-        sti                     ; Enable interrupts
-        call    [CPTR _PM_mouseHandler]
-        _add    sp,12,24
-
-        RESTSTK MsStack         ; Restore previous stack
-
-        popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        ret                     ; We are done!!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_timerISR - Timer interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible, since a timer overrun will simply hang the
-;       system.
-;----------------------------------------------------------------------------
-cprocfar    _PM_timerISR
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-
-        NEWSTK  TmStack         ; Switch to local stack
-        call    [CPTR _PM_timerHandler]
-        RESTSTK TmStack         ; Restore previous stack
-
-        popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevTimer - Chain to previous timer interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous timer interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_chainPrevTimer
-
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealTimer]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-        ret
-else
-        SWAPSTK TmStack         ; Swap back to previous stack
-        pushf                   ; Save state of interrupt flag
-        pushf                   ; Push flags on stack to simulate interrupt
-ifdef   USE_NASM
-        call far dword [_PM_prevTimer]
-else
-        call    [_PM_prevTimer]
-endif
-        popf                    ; Restore state of interrupt flag
-        SWAPSTK TmStack         ; Swap back to C stack again
-        ret
-endif
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. Make sure your C code executes as
-;       quickly as possible, since a timer overrun will simply hang the
-;       system.
-;----------------------------------------------------------------------------
-cprocfar    _PM_rtcISR
-
-        push    ds                  ; Save value of DS
-        push    es
-        pushad                      ; Save _all_ extended registers
-        cld                         ; Clear direction flag
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
-        mov     al,20h
-        out     0A0h,al
-        out     020h,al
-
-; Clear real-time clock timeout
-
-        in      al,70h              ; Read CMOS index register
-        push    _ax                 ;  and save for later
-        IODELAYN 3
-        mov     al,0Ch
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-
-; Call the C interrupt handler function
-
-        LOAD_DS                     ; Load DS register
-        cmp     [BYTE RtcInside],1  ; Check for mutual exclusion
-        je      @@Exit
-        mov     [BYTE RtcInside],1
-        sti                         ; Re-enable interrupts
-        NEWSTK  RtcStack            ; Switch to local stack
-        call    [CPTR _PM_rtcHandler]
-        RESTSTK RtcStack            ; Restore previous stack
-        mov     [BYTE RtcInside],0
-
-@@Exit: pop     _ax
-        out     70h,al              ; Restore CMOS index register
-        popad                       ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                        ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_keyISR - keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the keyboard interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-;       and hence is _not_ re-entrant. However we ensure within this routine
-;       mutual exclusion to the keyboard handling routine.
-;----------------------------------------------------------------------------
-cprocfar    _PM_keyISR
-
-        push    ds              ; Save value of DS
-        push    es
-        pushad                  ; Save _all_ extended registers
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-
-        cmp     [BYTE KyInside],1   ; Check for mutual exclusion
-        je      @@Reissued
-
-        mov     [BYTE KyInside],1
-        NEWSTK  KyStack         ; Switch to local stack
-        call    [CPTR _PM_keyHandler]   ; Call C code
-        RESTSTK KyStack         ; Restore previous stack
-        mov     [BYTE KyInside],0
-
-@@Exit: popad                   ; Restore all extended registers
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-; When the BIOS keyboard handler needs to change the SHIFT status lights
-; on the keyboard, in the process of doing this the keyboard controller
-; re-issues another interrupt, while the current handler is still executing.
-; If we recieve another interrupt while still handling the current one,
-; then simply chain directly to the previous handler.
-;
-; Note that for most DOS extenders, the real mode interrupt handler that we
-; install takes care of this for us.
-
-@@Reissued:
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-else
-        pushf
-ifdef   USE_NASM
-        call far dword [_PM_prevKey]
-else
-        call    [_PM_prevKey]
-endif
-endif
-        jmp     @@Exit
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevkey - Chain to previous key interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous key interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_chainPrevKey
-
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-        ret
-else
-
-; YIKES! For some strange reason, when execution returns from the
-; previous keyboard handler, interrupts are re-enabled!! Since we expect
-; interrupts to remain off during the duration of our handler, this can
-; cause havoc. However our stack macros always turn off interrupts, so they
-; will be off when we exit this routine. Obviously there is a tiny weeny
-; window when interrupts will be enabled, but there is nothing we can
-; do about this.
-
-        SWAPSTK KyStack         ; Swap back to previous stack
-        pushf                   ; Push flags on stack to simulate interrupt
-ifdef   USE_NASM
-        call far dword [_PM_prevKey]
-else
-        call    [_PM_prevKey]
-endif
-        SWAPSTK KyStack         ; Swap back to C stack again
-        ret
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_key15ISR - Int 15h keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; This routine gets called if we have been called to handle the Int 15h
-; keyboard interrupt callout from real mode.
-;
-;   Entry:  AX  - Hardware scan code to process
-;   Exit:   AX  - Hardware scan code to process (0 to ignore)
-;----------------------------------------------------------------------------
-cprocfar    _PM_key15ISR
-
-        push    ds
-        push    es
-        LOAD_DS
-        cmp     ah,4Fh
-        jnz     @@NotOurs       ; Quit if not keyboard callout
-
-        pushad
-        cld                     ; Clear direction flag
-        xor     ah,ah           ; AX := scan code
-        NEWSTK  Ky15Stack       ; Switch to local stack
-        push    _ax
-        call    [CPTR _PM_key15Handler] ; Call C code
-        _add    sp,2,4
-        RESTSTK Ky15Stack       ; Restore previous stack
-        test    ax,ax
-        jz      @@1
-        stc                     ; Set carry to process as normal
-        jmp     @@2
-@@1:    clc                     ; Clear carry to ignore scan code
-@@2:    popad
-        jmp     @@Exit          ; We are done
-
-@@NotOurs:
-ifdef   TNT
-        push    eax
-        push    ebx
-        push    ecx
-        pushfd                  ; Push flags on stack to simulate interrupt
-        mov     ax,250Eh        ; Call real mode procedure function
-        mov     ebx,[_PM_prevRealKey15]
-        mov     ecx,1           ; Copy real mode flags to real mode stack
-        int     21h             ; Call the real mode code
-        popfd
-        pop     ecx
-        pop     ebx
-        pop     eax
-else
-        pushf
-ifdef   USE_NASM
-        call far dword [_PM_prevKey15]
-else
-        call    [_PM_prevKey15]
-endif
-endif
-@@Exit: pop     es
-        pop     ds
-        retf    4
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_breakISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-Break interrupt. We simply set
-; the Ctrl-Break flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar    _PM_breakISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx
-
-        LOAD_DS                 ; Load DS register
-        mov     ebx,[_PM_ctrlBPtr]
-        mov     [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
-        cmp     [CPTR _PM_breakHandler],0
-        je      @@Exit
-
-        pushad
-        mov     _ax,1
-        push    _ax
-        call    [CPTR _PM_breakHandler] ; Call C code
-        pop     _ax
-        popad
-
-@@Exit: pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlBreakHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-Break flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart  PM_ctrlBreakHit
-
-        ARG     clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-        mov     ebx,[_PM_ctrlBPtr]
-        cli                     ; No interrupts thanks!
-        mov     _ax,[_ES _bx]
-        test    [BYTE clearFlag],1
-        jz      @@Done
-        mov     [UINT _ES _bx],0
-
-@@Done: pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_ctrlCISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-C interrupt. We simply set
-; the Ctrl-C flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar    _PM_ctrlCISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx
-
-        LOAD_DS                 ; Load DS register
-        mov     ebx,[_PM_ctrlCPtr]
-        mov     [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
-        cmp     [CPTR _PM_breakHandler],0
-        je      @@Exit
-
-        pushad
-        mov     _ax,0
-        push    _ax
-        call    [CPTR _PM_breakHandler] ; Call C code
-        pop     _ax
-        popad
-
-@@Exit: pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-        iretd
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlCHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-C flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart  PM_ctrlCHit
-
-        ARG     clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-        mov     ebx,[_PM_ctrlCPtr]
-        cli                     ; No interrupts thanks!
-        mov     _ax,[_ES _bx]
-        test    [BYTE clearFlag],1
-        jz      @@Done
-        mov     [UINT _ES _bx],0
-
-@@Done:
-        pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_criticalISR - Control Error handler interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt handler for the MSDOS Critical Error interrupt, to dispatch
-; control to high level C based subroutines. We save the state of all
-; registers in this routine, and switch to a local stack. We also pass
-; the values of the AX and DI registers to the as pointers, so that the
-; values can be modified before returning to MSDOS.
-;----------------------------------------------------------------------------
-cprocfar    _PM_criticalISR
-
-        sti
-        push    ds              ; Save value of DS
-        push    es
-        push    _bx             ; Save register values changed
-        cld                     ; Clear direction flag
-
-        LOAD_DS                 ; Load DS register
-        mov     ebx,[_PM_critPtr]
-        mov     [_ES _bx],ax
-        mov     [_ES _bx+2],di
-
-; Run alternate critical handler code if installed
-
-        cmp     [CPTR _PM_critHandler],0
-        je      @@NoAltHandler
-
-        pushad
-        push    _di
-        push    _ax
-        call    [CPTR _PM_critHandler]  ; Call C code
-        _add    sp,4,8
-        popad
-
-        pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-@@NoAltHandler:
-        mov     ax,3            ; Tell MSDOS to fail the operation
-        pop     _bx
-        pop     es
-        pop     ds
-        iret                    ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_criticalError(int *axVal,int *diVal,int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the critical error flags, and the values that
-; MSDOS passed in the AX and DI registers to our handler.
-;----------------------------------------------------------------------------
-cprocstart  PM_criticalError
-
-        ARG     axVal:DPTR, diVal:DPTR, clearFlag:UINT
-
-        enter_c
-        pushf                   ; Save interrupt status
-        push    es
-        mov     ebx,[_PM_critPtr]
-        cli                     ; No interrupts thanks!
-        xor     _ax,_ax
-        xor     _di,_di
-        mov     ax,[_ES _bx]
-        mov     di,[_ES _bx+2]
-        test    [BYTE clearFlag],1
-        jz      @@NoClear
-        mov     [ULONG _ES _bx],0
-@@NoClear:
-        _les    _bx,[axVal]
-        mov     [_ES _bx],_ax
-        _les    _bx,[diVal]
-        mov     [_ES _bx],_di
-        pop     es
-        popf                    ; Restore interrupt status
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setMouseHandler(int mask, PM_mouseHandler mh)
-;----------------------------------------------------------------------------
-cprocstart  _PM_setMouseHandler
-
-        ARG     mouseMask:UINT
-
-        enter_c
-        push    es
-
-        mov     ax,0Ch          ; AX := Function 12 - install interrupt sub
-        mov     _cx,[mouseMask] ; CX := mouse mask
-        mov     _dx,offset _PM_mouseISR
-        push    cs
-        pop     es              ; ES:_DX -> mouse handler
-        int     33h             ; Call mouse driver
-
-        pop     es
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_mousePMCB(void)
-;----------------------------------------------------------------------------
-; Mouse realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-;   Entry:  DS:_SI  -> Real mode stack at time of call
-;           ES:_DI  -> Real mode register data structure
-;           SS:_SP  -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar    _PM_mousePMCB
-
-        pushad
-        mov     eax,[es:_di+1Ch]    ; Load register values from real mode
-        mov     ebx,[es:_di+10h]
-        mov     ecx,[es:_di+18h]
-        mov     edx,[es:_di+14h]
-        mov     esi,[es:_di+04h]
-        mov     edi,[es:_di]
-        call    _PM_mouseISR        ; Call the mouse handler
-        popad
-
-        mov     ax,[ds:_si]
-        mov     [es:_di+2Ah],ax     ; Plug in return IP address
-        mov     ax,[ds:_si+2]
-        mov     [es:_di+2Ch],ax     ; Plug in return CS value
-        add     [WORD es:_di+2Eh],4 ; Remove return address from stack
-        iret                        ; Go back to real mode!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_int10PMCB(void)
-;----------------------------------------------------------------------------
-; int10 realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-;   Entry:  DS:ESI  -> Real mode stack at time of call
-;           ES:EDI  -> Real mode register data structure
-;           SS:ESP  -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar        _PM_int10PMCB
-
-        pushad
-        push    ds
-        push    es
-        push    fs
-
-        pushfd
-        pop     eax
-        mov     [es:edi+20h],ax     ; Save return flag status
-        mov     ax,[ds:esi]
-        mov     [es:edi+2Ah],ax     ; Plug in return IP address
-        mov     ax,[ds:esi+2]
-        mov     [es:edi+2Ch],ax     ; Plug in return CS value
-        add     [WORD es:edi+2Eh],4 ; Remove return address from stack
-
-; Call the install int10 handler in protected mode. This function gets called
-; with DS set to the current data selector, and ES:EDI pointing the the
-; real mode DPMI register structure at the time of the interrupt. The
-; handle must be written in assembler to be able to extract the real mode
-; register values from the structure
-
-        push    es
-        pop     fs                  ; FS:EDI -> real mode registers
-        LOAD_DS
-        NEWSTK  Int10Stack          ; Switch to local stack
-
-        call    [_PM_int10Handler]
-
-        RESTSTK Int10Stack          ; Restore previous stack
-        pop     fs
-        pop     es
-        pop     ds
-        popad
-        iret                        ; Go back to real mode!
-
-cprocend
-
-cpublic _PM_pmsmxCodeEnd
-
-endcodeseg  _pmsmx
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm
deleted file mode 100644
index 34985a9d8b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm
+++ /dev/null
@@ -1,652 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;*            Based on original code Copyright 1994 Otto Chrons
-;*
-;* Language:    80386 Assembler, TASM 4.0 or later
-;* Environment: IBM PC 32 bit protected mode
-;*
-;* Description: Low level page fault handler for virtual linear framebuffers.
-;*
-;****************************************************************************
-
-        IDEAL
-        JUMPS
-
-include "scitech.mac"           ; Memory model macros
-
-header      _vflat              ; Set up memory model
-
-VFLAT_START     EQU 0F0000000h
-VFLAT_END       EQU 0F03FFFFFh
-PAGE_PRESENT    EQU 1
-PAGE_NOTPRESENT EQU 0
-PAGE_READ       EQU 0
-PAGE_WRITE      EQU 2
-
-ifdef   DOS4GW
-
-;----------------------------------------------------------------------------
-; DOS4G/W flat linear framebuffer emulation.
-;----------------------------------------------------------------------------
-
-begdataseg  _vflat
-
-; Near pointers to the page directory base and our page tables. All of
-; this memory is always located in the first Mb of DOS memory.
-
-PDBR            dd  0               ; Page directory base register (CR3)
-accessPageAddr  dd  0
-accessPageTable dd  0
-
-; CauseWay page directory & 1st page table linear addresses.
-
-CauseWayDIRLinear dd 0
-CauseWay1stLinear dd 0
-
-; Place to store a copy of the original Page Table Directory before we
-; intialised our virtual buffer code.
-
-pageDirectory:  resd 1024           ; Saved page table directory
-
-ValidCS         dw  0               ; Valid CS for page faults
-Ring0CS         dw  0               ; Our ring 0 code selector
-LastPage        dd  0               ; Last page we mapped in
-BankFuncBuf:    resb 101            ; Place to store bank switch code
-BankFuncPtr     dd  offset BankFuncBuf
-
-INT14Gate:
-INT14Offset     dd      0           ; eip of original vector
-INT14Selector   dw      0           ; cs of original vector
-
-        cextern _PM_savedDS,USHORT
-        cextern VF_haveCauseWay,BOOL
-
-enddataseg  _vflat
-
-begcodeseg  _vflat              ; Start of code segment
-
-        cextern VF_malloc,FPTR
-
-;----------------------------------------------------------------------------
-; PF_handler64k - Page fault handler for 64k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler.  It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here.  If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction.  If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar    PF_handler64k
-
-; Check if this is a processor exeception or a page fault
-
-        push    eax
-        mov     ax,[cs:ValidCS]     ; Use CS override to access data
-        cmp     [ss:esp+12],ax      ; Is this a page fault?
-        jne     @@ToOldHandler      ; Nope, jump to the previous handler
-
-; Get address of page fault and check if within our handlers range
-
-        mov     eax,cr2             ; EBX has page fault linear address
-        cmp     eax,VFLAT_START     ; Is the fault less than ours?
-        jb      @@ToOldHandler      ; Yep, go to previous handler
-        cmp     eax,VFLAT_END       ; Is the fault more than ours?
-        jae     @@ToOldHandler      ; Yep, go to previous handler
-
-; This is our page fault, so we need to handle it
-
-        pushad
-        push    ds
-        push    es
-        mov     ebx,eax             ; EBX := page fault address
-        and     ebx,invert 0FFFFh   ; Mask to 64k bank boundary
-        mov     ds,[cs:_PM_savedDS]; Load segment registers
-        mov     es,[cs:_PM_savedDS]
-
-; Map in the page table for our virtual framebuffer area for modification
-
-        mov     edi,[PDBR]          ; EDI points to page directory
-        mov     edx,ebx             ; EDX = linear address
-        shr     edx,22              ; EDX = offset to page directory
-        mov     edx,[edx*4+edi]     ; EDX = physical page table address
-        mov     eax,edx
-        mov     edx,[accessPageTable]
-        or      eax,7
-        mov     [edx],eax
-        mov     eax,cr3
-        mov     cr3,eax             ; Update page table cache
-
-; Mark all pages valid for the new page fault area
-
-        mov     esi,ebx             ; ESI := linear address for page
-        shr     esi,10
-        and     esi,0FFFh           ; Offset into page table
-        add     esi,[accessPageAddr]
-ifdef   USE_NASM
-%assign off 0
-%rep 16
-        or      [DWORD esi+off],0000000001h ; Enable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT    16
-        or      [DWORD esi+off],0000000001h ; Enable pages
-off = off+4
-ENDM
-endif
-
-; Mark all pages invalid for the previously mapped area
-
-        xchg    esi,[LastPage]      ; Save last page for next page fault
-        test    esi,esi
-        jz      @@DoneMapping       ; Dont update if first time round
-ifdef   USE_NASM
-%assign off 0
-%rep 16
-        or      [DWORD esi+off],0FFFFFFFEh  ; Disable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT    16
-        and     [DWORD esi+off],0FFFFFFFEh  ; Disable pages
-off = off+4
-ENDM
-endif
-
-@@DoneMapping:
-        mov     eax,cr3
-        mov     cr3,eax             ; Flush the TLB
-
-; Now program the new SuperVGA starting bank address
-
-        mov     eax,ebx             ; EAX := page fault address
-        shr     eax,16
-        and     eax,0FFh            ; Mask to 0-255
-        call    [BankFuncPtr]       ; Call the bank switch function
-
-        pop     es
-        pop     ds
-        popad
-        pop     eax
-        add     esp,4               ; Pop the error code from stack
-        iretd                       ; Return to faulting instruction
-
-@@ToOldHandler:
-        pop     eax
-ifdef   USE_NASM
-        jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
-        jmp     [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PF_handler4k  - Page fault handler for 4k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler.  It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here.  If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction.  If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar    PF_handler4k
-
-; Fill in when we have tested all the 64Kb code
-
-ifdef   USE_NASM
-        jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
-        jmp     [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallFaultHandler(void *baseAddr,int bankSize)
-;----------------------------------------------------------------------------
-; Installes the page fault handler directly int the interrupt descriptor
-; table for maximum performance. This of course requires ring 0 access,
-; but none of this stuff will run without ring 0!
-;----------------------------------------------------------------------------
-cprocstart  InstallFaultHandler
-
-        ARG     baseAddr:ULONG, bankSize:UINT
-
-        enter_c
-
-        mov     [DWORD LastPage],0  ; No pages have been mapped
-        mov     ax,cs
-        mov     [ValidCS],ax        ; Save CS value for page faults
-
-; Put address of our page fault handler into the IDT directly
-
-        sub     esp,6               ; Allocate space on stack
-ifdef   USE_NASM
-        sidt    [ss:esp]            ; Store pointer to IDT
-else
-        sidt    [FWORD ss:esp]      ; Store pointer to IDT
-endif
-        pop     ax                  ; add esp,2
-        pop     eax                 ; Absolute address of IDT
-        add     eax,14*8            ; Point to Int #14
-
-; Note that Interrupt gates do not have the high and low word of the
-; offset in adjacent words in memory, there are 4 bytes separating them.
-
-        mov     ecx,[eax]           ; Get cs and low 16 bits of offset
-        mov     edx,[eax+6]         ; Get high 16 bits of offset in dx
-        shl     edx,16
-        mov     dx,cx               ; edx has offset
-        mov     [INT14Offset],edx   ; Save offset
-        shr     ecx,16
-        mov     [INT14Selector],cx  ; Save original cs
-        mov     [eax+2],cs          ; Install new cs
-        mov     edx,offset PF_handler64k
-        cmp     [UINT bankSize],4
-        jne     @@1
-        mov     edx,offset PF_handler4k
-@@1:    mov     [eax],dx            ; Install low word of offset
-        shr     edx,16
-        mov     [eax+6],dx          ; Install high word of offset
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void RemoveFaultHandler(void)
-;----------------------------------------------------------------------------
-; Closes down the virtual framebuffer services and restores the previous
-; page fault handler.
-;----------------------------------------------------------------------------
-cprocstart  RemoveFaultHandler
-
-        enter_c
-
-; Remove page fault handler from IDT
-
-        sub     esp,6               ; Allocate space on stack
-ifdef   USE_NASM
-        sidt    [ss:esp]            ; Store pointer to IDT
-else
-        sidt    [FWORD ss:esp]      ; Store pointer to IDT
-endif
-
-        pop     ax                  ; add esp,2
-        pop     eax                 ; Absolute address of IDT
-        add     eax,14*8            ; Point to Int #14
-        mov     cx,[INT14Selector]
-        mov     [eax+2],cx          ; Restore original CS
-        mov     edx,[INT14Offset]
-        mov     [eax],dx            ; Install low word of offset
-        shr     edx,16
-        mov     [eax+6],dx          ; Install high word of offset
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallBankFunc(int codeLen,void *bankFunc)
-;----------------------------------------------------------------------------
-; Installs the bank switch function by relocating it into our data segment
-; and making it into a callable function. We do it this way to make the
-; code identical to the way that the VflatD devices work under Windows.
-;----------------------------------------------------------------------------
-cprocstart  InstallBankFunc
-
-        ARG     codeLen:UINT, bankFunc:DPTR
-
-        enter_c
-
-        mov     esi,[bankFunc]      ; Copy the code into buffer
-        mov     edi,offset BankFuncBuf
-        mov     ecx,[codeLen]
-    rep movsb
-        mov     [BYTE edi],0C3h     ; Terminate the function with a near ret
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int InitPaging(void)
-;----------------------------------------------------------------------------
-; Initializes paging system. If paging is not enabled, builds a page table
-; directory and page tables for physical memory
-;
-;   Exit:       0   - Successful
-;               -1  - Couldn't initialize paging mechanism
-;----------------------------------------------------------------------------
-cprocstart  InitPaging
-
-        push    ebx
-        push    ecx
-        push    edx
-        push    esi
-        push    edi
-
-; Are we running under CauseWay?
-
-        mov     ax,0FFF9h
-        int     31h
-        jc      @@NotCauseway
-        cmp     ecx,"CAUS"
-        jnz     @@NotCauseway
-        cmp     edx,"EWAY"
-        jnz     @@NotCauseway
-
-        mov     [BOOL VF_haveCauseWay],1
-        mov     [CauseWayDIRLinear],esi
-        mov     [CauseWay1stLinear],edi
-
-; Check for DPMI
-
-        mov     ax,0ff00h
-        push    es
-        int     31h
-        pop     es
-        shr     edi,2
-        and     edi,3
-        cmp     edi,2
-        jz      @@ErrExit               ; Not supported under DPMI
-
-        mov     eax,[CauseWayDIRLinear]
-        jmp     @@CopyCR3
-
-@@NotCauseway:
-        mov     ax,cs
-        test    ax,3                    ; Which ring are we running
-        jnz     @@ErrExit               ; Needs zero ring to access
-                                        ; page tables (CR3)
-        mov     eax,cr0                 ; Load CR0
-        test    eax,80000000h           ; Is paging enabled?
-        jz      @@ErrExit               ; No, we must have paging!
-
-        mov     eax,cr3                 ; Load directory address
-        and     eax,0FFFFF000h
-
-@@CopyCR3:
-        mov     [PDBR],eax              ; Save it
-        mov     esi,eax
-        mov     edi,offset pageDirectory
-        mov     ecx,1024
-        cld
-        rep     movsd                   ; Copy the original page table directory
-        cmp     [DWORD accessPageAddr],0; Check if we have allocated page
-        jne     @@HaveRealMem           ; table already (we cant free it)
-
-        mov     eax,0100h               ; DPMI DOS allocate
-        mov     ebx,8192/16
-        int     31h                     ; Allocate 8192 bytes
-        and     eax,0FFFFh
-        shl     eax,4                   ; EAX points to newly allocated memory
-        add     eax,4095
-        and     eax,0FFFFF000h          ; Page align
-        mov     [accessPageAddr],eax
-
-@@HaveRealMem:
-        mov     eax,[accessPageAddr]    ; EAX -> page table in 1st Mb
-        shr     eax,12
-        and     eax,3FFh                ; Page table offset
-        shl     eax,2
-        cmp     [BOOL VF_haveCauseWay],0
-        jz      @@NotCW0
-        mov     ebx,[CauseWay1stLinear]
-        jmp     @@Put1st
-
-@@NotCW0:
-        mov     ebx,[PDBR]
-        mov     ebx,[ebx]
-        and     ebx,0FFFFF000h          ; Page table for 1st megabyte
-
-@@Put1st:
-        add     eax,ebx
-        mov     [accessPageTable],eax
-        sub     eax,eax                 ; No error
-        jmp     @@Exit
-
-@@ErrExit:
-        mov     eax,-1
-
-@@Exit: pop     edi
-        pop     esi
-        pop     edx
-        pop     ecx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void ClosePaging(void)
-;----------------------------------------------------------------------------
-; Closes the paging system
-;----------------------------------------------------------------------------
-cprocstart  ClosePaging
-
-        push    eax
-        push    ecx
-        push    edx
-        push    esi
-        push    edi
-
-        mov     eax,[accessPageAddr]
-        call    AccessPage              ; Restore AccessPage mapping
-        mov     edi,[PDBR]
-        mov     esi,offset pageDirectory
-        mov     ecx,1024
-        cld
-        rep     movsd                   ; Restore the original page table directory
-
-@@Exit: pop     edi
-        pop     esi
-        pop     edx
-        pop     ecx
-        pop     eax
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long AccessPage(long phys)
-;----------------------------------------------------------------------------
-; Maps a known page to given physical memory
-;   Entry:      EAX - Physical memory
-;   Exit:       EAX - Linear memory address of mapped phys mem
-;----------------------------------------------------------------------------
-cprocstatic     AccessPage
-
-        push    edx
-        mov     edx,[accessPageTable]
-        or      eax,7
-        mov     [edx],eax
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-        mov     eax,[accessPageAddr]
-        pop     edx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long GetPhysicalAddress(long linear)
-;----------------------------------------------------------------------------
-; Returns the physical address of linear address
-;   Entry:      EAX - Linear address to convert
-;   Exit:       EAX - Physical address
-;----------------------------------------------------------------------------
-cprocstatic     GetPhysicalAddress
-
-        push    ebx
-        push    edx
-        mov     edx,eax
-        shr     edx,22                  ; EDX is the directory offset
-        mov     ebx,[PDBR]
-        mov     edx,[edx*4+ebx]         ; Load page table address
-        push    eax
-        mov     eax,edx
-        call    AccessPage              ; Access the page table
-        mov     edx,eax
-        pop     eax
-        shr     eax,12
-        and     eax,03FFh               ; EAX offset into page table
-        mov     eax,[edx+eax*4]         ; Load physical address
-        and     eax,0FFFFF000h
-        pop     edx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void CreatePageTable(long pageDEntry)
-;----------------------------------------------------------------------------
-; Creates a page table for specific address (4MB)
-;       Entry:  EAX - Page directory entry (top 10-bits of address)
-;----------------------------------------------------------------------------
-cprocstatic     CreatePageTable
-
-        push    ebx
-        push    ecx
-        push    edx
-        push    edi
-        mov     ebx,eax                 ; Save address
-        mov     eax,8192
-        push    eax
-        call    VF_malloc              ; Allocate page table directory
-        add     esp,4
-        add     eax,0FFFh
-        and     eax,0FFFFF000h          ; Page align (4KB)
-        mov     edi,eax                 ; Save page table linear address
-        sub     eax,eax                 ; Fill with zero
-        mov     ecx,1024
-        cld
-        rep     stosd                   ; Clear page table
-        sub     edi,4096
-        mov     eax,edi
-        call    GetPhysicalAddress
-        mov     edx,[PDBR]
-        or      eax,7                   ; Present/write/user bit
-        mov     [edx+ebx*4],eax         ; Save physical address into page directory
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-        pop     edi
-        pop     edx
-        pop     ecx
-        pop     ebx
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-;----------------------------------------------------------------------------
-; Maps physical memory into linear memory
-;   Entry:      pAddr   - Physical address
-;               lAddr   - Linear address
-;               pages   - Number of 4K pages to map
-;               flags   - Page flags
-;                           bit 0   =       present
-;                           bit 1   =       Read(0)/Write(1)
-;----------------------------------------------------------------------------
-cprocstart  MapPhysical2Linear
-
-        ARG     pAddr:ULONG, lAddr:ULONG, pages:UINT, pflags:UINT
-
-        enter_c
-
-        and     [ULONG pAddr],0FFFFF000h; Page boundary
-        and     [ULONG lAddr],0FFFFF000h; Page boundary
-        mov     ecx,[pflags]
-        and     ecx,11b                 ; Just two bits
-        or      ecx,100b                ; Supervisor bit
-        mov     [pflags],ecx
-
-        mov     edx,[lAddr]
-        shr     edx,22                  ; EDX = Directory
-        mov     esi,[PDBR]
-        mov     edi,[pages]             ; EDI page count
-        mov     ebx,[lAddr]
-
-@@CreateLoop:
-        mov     ecx,[esi+edx*4]         ; Load page table address
-        test    ecx,1                   ; Is it present?
-        jnz     @@TableOK
-        mov     eax,edx
-        call    CreatePageTable         ; Create a page table
-@@TableOK:
-        mov     eax,ebx
-        shr     eax,12
-        and     eax,3FFh
-        sub     eax,1024
-        neg     eax                     ; EAX = page count in this table
-        inc     edx                     ; Next table
-        mov     ebx,0                   ; Next time we'll map 1K pages
-        sub     edi,eax                 ; Subtract mapped pages from page count
-        jns     @@CreateLoop            ; Create more tables if necessary
-
-        mov     ecx,[pages]             ; ECX = Page count
-        mov     esi,[lAddr]
-        shr     esi,12                  ; Offset part isn't needed
-        mov     edi,[pAddr]
-@@MappingLoop:
-        mov     eax,esi
-        shr     eax,10                  ; EAX = offset to page directory
-        mov     ebx,[PDBR]
-        mov     eax,[eax*4+ebx]         ; EAX = page table address
-        call    AccessPage
-        mov     ebx,esi
-        and     ebx,3FFh                ; EBX = offset to page table
-        mov     edx,edi
-        add     edi,4096                ; Next physical address
-        inc     esi                     ; Next linear page
-        or      edx,[pflags]            ; Update flags...
-        mov     [eax+ebx*4],edx         ; Store page table entry
-        loop    @@MappingLoop
-        mov     eax,cr3
-        mov     cr3,eax                 ; Update page table cache
-
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _vflat
-
-endif
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c
deleted file mode 100644
index 5447e574ec..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit SMX embedded systems development.
-*
-* Description:  SMX specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External timing function */
-
-void __ZTimerInit(void);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define SetMaxThreadPriority()      0
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define RestoreThreadPriority(i)    (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    ulong resolution;
-
-    __ZTimerInit();
-    ULZTimerResolution(&resolution);
-    freq->low = (ulong)(10000000000.0 / resolution);
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                   \
-{                                       \
-    (t)->low = ULZReadTime() * 10000L;  \
-    (t)->high = 0;                      \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/event.c b/board/MAI/bios_emulator/scitech/src/pm/smx/event.c
deleted file mode 100644
index 533c2615b1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/event.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit SMX embedded systems development
-*
-* Description:  32-bit SMX implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-#include "smx/ps2mouse.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool _VARAPI   _EVT_useEvents = true;  /* True to use event handling   */
-ibool _VARAPI   _EVT_installed = 0;     /* Event handers installed?     */
-uchar _VARAPI   *_EVT_biosPtr = NULL;   /* Pointer to the BIOS data area */
-static ibool    haveMouse = false;      /* True if we have a mouse      */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* External assembler functions */
-
-void    EVTAPI _EVT_pollJoystick(void);
-uint    EVTAPI _EVT_disableInt(void);
-uint    EVTAPI _EVT_restoreInt(uint flags);
-void    EVTAPI _EVT_codeStart(void);
-void    EVTAPI _EVT_codeEnd(void);
-void    EVTAPI _EVT_cCodeStart(void);
-void    EVTAPI _EVT_cCodeEnd(void);
-int     EVTAPI _EVT_getKeyCode(void);
-int     EVTAPI EVT_rdinx(int port,int index);
-void    EVTAPI EVT_wrinx(int port,int index,int value);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS, because we are fully interrupt driven.
-****************************************************************************/
-#define _EVT_pumpMessages()
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    return (ulong)PM_getLong(_EVT_biosPtr+0x6C) * 55UL;
-}
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#include "common/keyboard.c"
-
-/****************************************************************************
-REMARKS:
-Determines if we have a mouse attached and functioning.
-****************************************************************************/
-static ibool detectMouse(void)
-{
-   return(ps2Query());
-}
-
-/****************************************************************************
-PARAMETERS:
-what        - Event code
-message     - Event message
-x,y         - Mouse position at time of event
-but_stat    - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from within
-the mouse interrupt subroutine, so it must be efficient.
-
-NOTE:   Interrupts MUST be OFF while this routine is called to ensure we have
-	mutually exclusive access to our internal data structures for
-	interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addMouseEvent(
-    uint what,
-    uint message,
-    int x,
-    int y,
-    int mickeyX,
-    int mickeyY,
-    uint but_stat)
-{
-    event_t evt;
-
-    if (EVT.count < EVENTQSIZE) {
-	/* Save information in event record. */
-	evt.when = _EVT_getTicks();
-	evt.what = what;
-	evt.message = message;
-	evt.modifiers = but_stat;
-	evt.where_x = x;                /* Save mouse event position    */
-	evt.where_y = y;
-	evt.relative_x = mickeyX;
-	evt.relative_y = mickeyY;
-	evt.modifiers |= EVT.keyModifiers;
-	addEvent(&evt);                 /* Add to tail of event queue   */
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-mask        - Event mask
-butstate    - Button state
-x           - Mouse x coordinate
-y           - Mouse y coordinate
-
-REMARKS:
-Mouse event handling routine. This gets called when a mouse event occurs,
-and we call the addMouseEvent() routine to add the appropriate mouse event
-to the event queue.
-
-Note: Interrupts are ON when this routine is called by the mouse driver code.
-/*AM: NOTE: This function has not actually been ported from DOS yet and should not */
-/*AM: be installed until it is. */
-****************************************************************************/
-static void EVTAPI mouseISR(
-    uint mask,
-    uint butstate,
-    int x,
-    int y,
-    int mickeyX,
-    int mickeyY)
-{
-    RMREGS  regs;
-    uint    ps;
-
-    if (mask & 1) {
-	/* Save the current mouse coordinates */
-	EVT.mx = x; EVT.my = y;
-
-	/* If the last event was a movement event, then modify the last
-	 * event rather than post a new one, so that the queue will not
-	 * become saturated. Before we modify the data structures, we
-	 * MUST ensure that interrupts are off.
-	 */
-	ps = _EVT_disableInt();
-	if (EVT.oldMove != -1) {
-	    EVT.evtq[EVT.oldMove].where_x = x;          /* Modify existing one  */
-	    EVT.evtq[EVT.oldMove].where_y = y;
-	    EVT.evtq[EVT.oldMove].relative_x += mickeyX;
-	    EVT.evtq[EVT.oldMove].relative_y += mickeyY;
-	    }
-	else {
-	    EVT.oldMove = EVT.freeHead;         /* Save id of this move event   */
-	    addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
-	    }
-	_EVT_restoreInt(ps);
-	}
-    if (mask & 0x2A) {
-	ps = _EVT_disableInt();
-	addMouseEvent(EVT_MOUSEDOWN,mask >> 1,x,y,0,0,butstate);
-	EVT.oldMove = -1;
-	_EVT_restoreInt(ps);
-	}
-    if (mask & 0x54) {
-	ps = _EVT_disableInt();
-	addMouseEvent(EVT_MOUSEUP,mask >> 2,x,y,0,0,butstate);
-	EVT.oldMove = -1;
-	_EVT_restoreInt(ps);
-	}
-    EVT.oldKey = -1;
-}
-
-/****************************************************************************
-REMARKS:
-Keyboard interrupt handler function.
-
-NOTE:   Interrupts are OFF when this routine is called by the keyboard ISR,
-	and we leave them OFF the entire time. This has been modified to work
-      in conjunction with smx keyboard handler.
-****************************************************************************/
-static void EVTAPI keyboardISR(void)
-{
-   PM_chainPrevKey();
-    processRawScanCode(PM_inpb(0x60));
-    PM_outpb(0x20,0x20);
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    int     i;
-
-    EVT.mouseMove = mouseMove;
-    _EVT_biosPtr = PM_getBIOSPointer();
-    EVT_resume();
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVTAPI EVT_resume(void)
-{
-    static int      locked = 0;
-    int             stat;
-    uchar           mods;
-    PM_lockHandle   lh;
-
-    if (_EVT_useEvents) {
-	/* Initialise the event queue and enable our interrupt handlers */
-	initEventQueue();
-	PM_setKeyHandler(keyboardISR);
-	if ((haveMouse = detectMouse()) != 0)
-	    PM_setMouseHandler(0xFFFF,mouseISR);
-
-	/* Read the keyboard modifier flags from the BIOS to get the
-	 * correct initialisation state. The only state we care about is
-	 * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
-	 * CAPSLOCK.
-	 */
-	EVT.keyModifiers = 0;
-	mods = PM_getByte(_EVT_biosPtr+0x17);
-	if (mods & 0x10)
-	    EVT.keyModifiers |= EVT_SCROLLLOCK;
-	if (mods & 0x20)
-	    EVT.keyModifiers |= EVT_NUMLOCK;
-	if (mods & 0x40)
-	    EVT.keyModifiers |= EVT_CAPSLOCK;
-
-	/* Lock all of the code and data used by our protected mode interrupt
-	 * handling routines, so that it will continue to work correctly
-	 * under real mode.
-	 */
-	if (!locked) {
-	    /* It is difficult to ensure that we lock our global data, so we
-	     * do this by taking the address of a variable locking all data
-	     * 2Kb on either side. This should properly cover the global data
-	     * used by the module (the other alternative is to declare the
-	     * variables in assembler, in which case we know it will be
-	     * correct).
-	     */
-	    stat  = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
-	    stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
-	    stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
-	    stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
-	    if (stat) {
-		PM_fatalError("Page locking services failed - interrupt handling not safe!");
-		exit(1);
-		}
-	    locked = 1;
-	    }
-
-	_EVT_installed = true;
-	}
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    if (haveMouse) {
-	ps2MouseStop();
-	ps2MouseStart( 0, xRes, 0, yRes, -1, -1, -1);
-	}
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
-    int *x,
-    int *y)
-{
-    if (haveMouse)
-	ps2MouseMove(*x, *y);
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVTAPI EVT_suspend(void)
-{
-    uchar   mods;
-
-    if (_EVT_installed) {
-	PM_restoreKeyHandler();
-    if (haveMouse)
-	PM_restoreMouseHandler();
-
-	/* Set the keyboard modifier flags in the BIOS to our values */
-	EVT_allowLEDS(true);
-	mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
-	if (EVT.keyModifiers & EVT_SCROLLLOCK)
-	    mods |= 0x10;
-	if (EVT.keyModifiers & EVT_NUMLOCK)
-	    mods |= 0x20;
-	if (EVT.keyModifiers & EVT_CAPSLOCK)
-	    mods |= 0x40;
-	PM_setByte(_EVT_biosPtr+0x17,mods);
-
-	/* Flag that we are no longer installed */
-	_EVT_installed = false;
-	}
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVTAPI EVT_exit(void)
-{
-    EVT_suspend();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h
deleted file mode 100644
index 3ff8daa2a9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit SMX embedded systems development.
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c b/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c
deleted file mode 100644
index 99ee3d4be4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32 bit SMX embedded systems development.
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "ztimerc.h"
-#include "event.h"
-#include "mtrr.h"
-#include "pm_help.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include <conio.h>
-#ifdef  __GNUC__
-#include <unistd.h>
-#include <sys/nearptr.h>
-#include <sys/stat.h>
-#else
-#include <direct.h>
-#endif
-#ifdef  __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-typedef struct {
-    int     oldMode;
-    int     old50Lines;
-    } DOS_stateBuf;
-
-#define MAX_RM_BLOCKS   10
-
-static struct {
-    void    *p;
-    uint    tag;
-    } rmBlocks[MAX_RM_BLOCKS];
-
-static uint     VESABuf_len = 1024;     /* Length of the VESABuf buffer     */
-static void     *VESABuf_ptr = NULL;    /* Near pointer to VESABuf          */
-static uint     VESABuf_rseg;           /* Real mode segment of VESABuf     */
-static uint     VESABuf_roff;           /* Real mode offset of VESABuf      */
-static void     (PMAPIP fatalErrorCleanup)(void) = NULL;
-ushort _VARAPI  _PM_savedDS = 0;
-static ulong    PDB = 0,*pPDB = NULL;
-static uint     VXD_version = -1;
-
-/*----------------------------- Implementation ----------------------------*/
-
-ulong   _ASMAPI _PM_getPDB(void);
-void    _ASMAPI _PM_VxDCall(VXD_regs *regs,uint off,uint sel);
-
-/****************************************************************************
-REMARKS:
-External function to call the PMHELP helper VxD.
-****************************************************************************/
-void PMAPI PM_VxDCall(
-    VXD_regs *regs)
-{
-}
-
-/****************************************************************************
-RETURNS:
-BCD coded version number of the VxD, or 0 if not loaded (ie: 0x202 - 2.2)
-
-REMARKS:
-This function gets the version number for the VxD that we have connected to.
-****************************************************************************/
-uint PMAPI PMHELP_getVersion(void)
-{
-    return VXD_version = 0;
-}
-
-void PMAPI PM_init(void)
-{
-#ifndef REALMODE
-    MTRR_init();
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-#ifndef REALMODE
-    return MTRR_enableWriteCombine(base,size,type);
-#else
-    return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return false; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_SMX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void MGLOutput(char *);
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    MGLOutput(msg);
-/* No support for fprintf() under smx currently! */
-/*  fprintf(stderr,"%s\n", msg); */
-    exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
-    if (VESABuf_ptr)
-	PM_freeRealSeg(VESABuf_ptr);
-    VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	atexit(ExitVBEBuf);
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return PM_int386x(intno,in,out,&sregs);
-}
-
-/* Routines to set and get the real mode interrupt vectors, by making
- * direct real mode calls to DOS and bypassing the DOS extenders API.
- * This is the safest way to handle this, as some servers try to be
- * smart about changing real mode vectors.
- */
-
-void PMAPI _PM_getRMvect(int intno, long *realisr)
-{
-    RMREGS  regs;
-    RMSREGS sregs;
-
-    PM_saveDS();
-    regs.h.ah = 0x35;
-    regs.h.al = intno;
-    PM_int86x(0x21, &regs, &regs, &sregs);
-    *realisr = ((long)sregs.es << 16) | regs.x.bx;
-}
-
-void PMAPI _PM_setRMvect(int intno, long realisr)
-{
-    RMREGS  regs;
-    RMSREGS sregs;
-
-    PM_saveDS();
-    regs.h.ah = 0x25;
-    regs.h.al = intno;
-    sregs.ds = (int)(realisr >> 16);
-    regs.x.dx = (int)(realisr & 0xFFFF);
-    PM_int86x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI _PM_addRealModeBlock(void *mem,uint tag)
-{
-    int i;
-
-    for (i = 0; i < MAX_RM_BLOCKS; i++) {
-	if (rmBlocks[i].p == NULL) {
-	    rmBlocks[i].p = mem;
-	    rmBlocks[i].tag = tag;
-	    return;
-	    }
-	}
-    PM_fatalError("To many real mode memory block allocations!");
-}
-
-uint PMAPI _PM_findRealModeBlock(void *mem)
-{
-    int i;
-
-    for (i = 0; i < MAX_RM_BLOCKS; i++) {
-	if (rmBlocks[i].p == mem)
-	    return rmBlocks[i].tag;
-	}
-    PM_fatalError("Could not find prior real mode memory block allocation!");
-    return 0;
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'C'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[256];
-    char        *env;
-
-    if ((env = getenv("NUCLEUS_PATH")) != NULL)
-	return env;
-    return "c:\\nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return "SMX"; }
-
-const char * PMAPI PM_getMachineName(void)
-{ return "SMX"; }
-
-int PMAPI PM_kbhit(void)
-{
-    int     hit;
-    event_t evt;
-
-    hit = EVT_peekNext(&evt,EVT_KEYDOWN | EVT_KEYREPEAT);
-    EVT_flush(~(EVT_KEYDOWN | EVT_KEYREPEAT));
-    return hit;
-}
-
-int PMAPI PM_getch(void)
-{
-   event_t evt;
-
-    EVT_halt(&evt,EVT_KEYDOWN);
-   return EVT_asciiCode(evt.message);
-}
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
-    /* Not used for SMX */
-    (void)hwndUser;
-    (void)device;
-    (void)xRes;
-    (void)yRes;
-    (void)bpp;
-    (void)fullScreen;
-    return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    return sizeof(DOS_stateBuf);
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
-    RMREGS          regs;
-    DOS_stateBuf    *sb = stateBuf;
-
-    /* Save the old video mode state */
-    regs.h.ah = 0x0F;
-    PM_int86(0x10,&regs,&regs);
-    sb->oldMode = regs.h.al & 0x7F;
-    sb->old50Lines = false;
-    if (sb->oldMode == 0x3) {
-	regs.x.ax = 0x1130;
-	regs.x.bx = 0;
-	regs.x.dx = 0;
-	PM_int86(0x10,&regs,&regs);
-	sb->old50Lines = (regs.h.dl == 42 || regs.h.dl == 49);
-	}
-    (void)hwndConsole;
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
-    /* Not used for SMX */
-    (void)saveState;
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
-    RMREGS              regs;
-    const DOS_stateBuf  *sb = stateBuf;
-
-    /* Retore 50 line mode if set */
-    if (sb->old50Lines) {
-	regs.x.ax = 0x1112;
-	regs.x.bx = 0;
-	PM_int86(0x10,&regs,&regs);
-	}
-    (void)hwndConsole;
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
-    /* Not used for SMX */
-    (void)hwndConsole;
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x50,x);
-    PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setWord(_biosPtr+0x4A,width);
-    PM_setWord(_biosPtr+0x4C,width*2);
-    PM_setByte(_biosPtr+0x84,height-1);
-    if (height > 25) {
-	PM_setWord(_biosPtr+0x60,0x0607);
-	PM_setByte(_biosPtr+0x85,0x08);
-	}
-    else {
-	PM_setWord(_biosPtr+0x60,0x0D0E);
-	PM_setByte(_biosPtr+0x85,0x016);
-	}
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
-    return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
-    PM_free(ptr);
-}
-
-#define GetRMVect(intno,isr)    *(isr) = ((ulong*)rmZeroPtr)[intno]
-#define SetRMVect(intno,isr)    ((ulong*)rmZeroPtr)[intno] = (isr)
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    static int      firstTime = true;
-    static uchar    *rmZeroPtr;
-    long            Current10,Current6D,Current42;
-    RMREGS          regs;
-    RMSREGS         sregs;
-
-    /* Create a zero memory mapping for us to use */
-    if (firstTime) {
-	rmZeroPtr = PM_mapPhysicalAddr(0,0x7FFF,true);
-	firstTime = false;
-	}
-
-    /* Remap the secondary BIOS to 0xC0000 physical */
-    if (BIOSPhysAddr != 0xC0000L || BIOSLen > 32768) {
-	/* SMX cannot virtually remap the BIOS, so we can only work if all
-	 * the secondary controllers are identical, and we then use the
-	 * BIOS on the first controller for all the remaining controllers.
-	 *
-	 * For OS'es that do virtual memory, and remapping of 0xC0000
-	 * physical (perhaps a copy on write mapping) should be all that
-	 * is needed.
-	 */
-	return false;
-	}
-
-    /* Save current handlers of int 10h and 6Dh */
-    GetRMVect(0x10,&Current10);
-    GetRMVect(0x6D,&Current6D);
-
-    /* POST the secondary BIOS */
-    GetRMVect(0x42,&Current42);
-    SetRMVect(0x10,Current42);  /* Restore int 10h to STD-BIOS */
-    regs.x.ax = axVal;
-    PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
-    /* Restore current handlers */
-    SetRMVect(0x10,Current10);
-    SetRMVect(0x6D,Current6D);
-
-    /* Second the primary BIOS mappin 1:1 for 0xC0000 physical */
-    if (BIOSPhysAddr != 0xC0000L) {
-	/* SMX does not support this */
-	(void)mappedBIOS;
-	}
-    return true;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    ulong           microseconds = milliseconds * 1000L;
-    LZTimerObject   tm;
-
-    LZTimerOnExt(&tm);
-    while (LZTimerLapExt(&tm) < microseconds)
-	;
-    LZTimerOffExt(&tm);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    (void)szDLLName;
-    return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
-    int level)
-{
-    return level;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
-    PM_findData *findData,
-    struct find_t *blk)
-{
-    ulong   dwSize = findData->dwSize;
-
-    memset(findData,0,findData->dwSize);
-    findData->dwSize = dwSize;
-    if (blk->attrib & _A_RDONLY)
-	findData->attrib |= PM_FILE_READONLY;
-    if (blk->attrib & _A_SUBDIR)
-	findData->attrib |= PM_FILE_DIRECTORY;
-    if (blk->attrib & _A_ARCH)
-	findData->attrib |= PM_FILE_ARCHIVE;
-    if (blk->attrib & _A_HIDDEN)
-	findData->attrib |= PM_FILE_HIDDEN;
-    if (blk->attrib & _A_SYSTEM)
-	findData->attrib |= PM_FILE_SYSTEM;
-    findData->sizeLo = blk->size;
-    strncpy(findData->name,blk->name,PM_MAX_PATH);
-    findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK   (_A_RDONLY | _A_ARCH | _A_SUBDIR | _A_HIDDEN | _A_SYSTEM)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    struct find_t *blk;
-
-    if ((blk = PM_malloc(sizeof(*blk))) == NULL)
-	return PM_FILE_INVALID;
-    if (_dos_findfirst((char*)filename,FIND_MASK,blk) == 0) {
-	convertFindData(findData,blk);
-	return blk;
-	}
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    struct find_t *blk = handle;
-
-    if (_dos_findnext(blk) == 0) {
-	convertFindData(findData,blk);
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    PM_free(handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    RMREGS  regs;
-    regs.h.dl = (uchar)(drive - 'A' + 1);
-    regs.h.ah = 0x36;               /* Get disk information service */
-    PM_int86(0x21,&regs,&regs);
-    return regs.x.ax != 0xFFFF;     /* AX = 0xFFFF if disk is invalid */
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    uint oldDrive,maxDrives;
-    _dos_getdrive(&oldDrive);
-    _dos_setdrive(drive,&maxDrives);
-    getcwd(dir,len);
-    _dos_setdrive(oldDrive,&maxDrives);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-#if defined(TNT) && defined(_MSC_VER)
-    DWORD attr = 0;
-
-    if (attrib & PM_FILE_READONLY)
-	attr |= FILE_ATTRIBUTE_READONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	attr |= FILE_ATTRIBUTE_ARCHIVE;
-    if (attrib & PM_FILE_HIDDEN)
-	attr |= FILE_ATTRIBUTE_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	attr |= FILE_ATTRIBUTE_SYSTEM;
-    SetFileAttributes((LPSTR)filename, attr);
-#else
-    uint attr = 0;
-
-    if (attrib & PM_FILE_READONLY)
-	attr |= _A_RDONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	attr |= _A_ARCH;
-    if (attrib & PM_FILE_HIDDEN)
-	attr |= _A_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	attr |= _A_SYSTEM;
-    _dos_setfileattr(filename,attr);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-#ifdef  __GNUC__
-    return mkdir(filename,S_IRUSR) == 0;
-#else
-/*AM:   return mkdir(filename) == 0; */
-    return(false);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-/*AM:   return rmdir(filename) == 0; */
-    return(false);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked, physically contiguous memory. The memory
-may be required to be below the 16Meg boundary.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    void            *p;
-    uint            r_seg,r_off;
-    PM_lockHandle   lh;
-
-    /* Under DOS the only way to know the physical memory address is to
-     * allocate the memory below the 1Meg boundary as real mode memory.
-     * We also allocate 4095 bytes more memory than we need, so we can
-     * properly page align the start of the memory block for DMA operations.
-     */
-    if (size > 4096)
-	return NULL;
-    if ((p = PM_allocRealSeg((size + 0xFFF) & ~0xFFF,&r_seg,&r_off)) == NULL)
-	return NULL;
-    *physAddr = ((r_seg << 4) + r_off + 0xFFF) & ~0xFFF;
-    PM_lockDataPages(p,size*2,&lh);
-    return p;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
-    (void)size;
-    PM_freeRealSeg(p);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Generic DPMI routines common to 16/32 bit code                          */
-/*-------------------------------------------------------------------------*/
-
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit)
-{
-    PMREGS  r;
-    ulong   physOfs;
-
-    if (physAddr < 0x100000L) {
-	/* We can't map memory below 1Mb, but the linear address are already
-	 * mapped 1:1 for this memory anyway so we just return the base address.
-	 */
-	return physAddr;
-	}
-
-    /* Round the physical address to a 4Kb boundary and the limit to a
-     * 4Kb-1 boundary before passing the values to DPMI as some extenders
-     * will fail the calls unless this is the case. If we round the
-     * physical address, then we also add an extra offset into the address
-     * that we return.
-     */
-    physOfs = physAddr & 4095;
-    physAddr = physAddr & ~4095;
-    limit = ((limit+physOfs+1+4095) & ~4095)-1;
-
-    r.x.ax = 0x800;                 /* DPMI map physical to linear      */
-    r.x.bx = physAddr >> 16;
-    r.x.cx = physAddr & 0xFFFF;
-    r.x.si = limit >> 16;
-    r.x.di = limit & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0xFFFFFFFFUL;
-    return ((ulong)r.x.bx << 16) + r.x.cx + physOfs;
-}
-
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr)
-{
-    PMREGS  r;
-
-    r.x.ax = 7;                     /* DPMI set selector base address   */
-    r.x.bx = sel;
-    r.x.cx = linAddr >> 16;
-    r.x.dx = linAddr & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0;
-    return 1;
-}
-
-ulong PMAPI DPMI_getSelectorBase(ushort sel)
-{
-    PMREGS  r;
-
-    r.x.ax = 6;                     /* DPMI get selector base address   */
-    r.x.bx = sel;
-    PM_int386(0x31, &r, &r);
-    return ((ulong)r.x.cx << 16) + r.x.dx;
-}
-
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit)
-{
-    PMREGS  r;
-
-    r.x.ax = 8;                     /* DPMI set selector limit          */
-    r.x.bx = sel;
-    r.x.cx = limit >> 16;
-    r.x.dx = limit & 0xFFFF;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return 0;
-    return 1;
-}
-
-uint PMAPI DPMI_createSelector(ulong base,ulong limit)
-{
-    uint    sel;
-    PMREGS  r;
-
-    /* Allocate 1 descriptor */
-    r.x.ax = 0;
-    r.x.cx = 1;
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag) return 0;
-    sel = r.x.ax;
-
-    /* Set the descriptor access rights (for a 32 bit page granular
-     * segment, ring 0).
-     */
-    r.x.ax = 9;
-    r.x.bx = sel;
-    r.x.cx = 0x4093;
-    PM_int386(0x31, &r, &r);
-
-    /* Map physical memory and create selector */
-    if ((base = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFFUL)
-	return 0;
-    if (!DPMI_setSelectorBase(sel,base))
-	return 0;
-    if (!DPMI_setSelectorLimit(sel,limit))
-	return 0;
-    return sel;
-}
-
-void PMAPI DPMI_freeSelector(uint sel)
-{
-    PMREGS  r;
-
-    r.x.ax = 1;
-    r.x.bx = sel;
-    PM_int386(0x31, &r, &r);
-}
-
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len)
-{
-    PMREGS  r;
-
-    r.x.ax = 0x600;                     /* DPMI Lock Linear Region      */
-    r.x.bx = (linear >> 16);            /* Linear address in BX:CX      */
-    r.x.cx = (linear & 0xFFFF);
-    r.x.si = (len >> 16);               /* Length in SI:DI              */
-    r.x.di = (len & 0xFFFF);
-    PM_int386(0x31, &r, &r);
-    return (!r.x.cflag);
-}
-
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len)
-{
-    PMREGS  r;
-
-    r.x.ax = 0x601;                     /* DPMI Unlock Linear Region    */
-    r.x.bx = (linear >> 16);            /* Linear address in BX:CX      */
-    r.x.cx = (linear & 0xFFFF);
-    r.x.si = (len >> 16);               /* Length in SI:DI              */
-    r.x.di = (len & 0xFFFF);
-    PM_int386(0x31, &r, &r);
-    return (!r.x.cflag);
-}
-
-void * PMAPI DPMI_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
-    PMSREGS sregs;
-    ulong   linAddr;
-    ulong   DSBaseAddr;
-
-    /* Get the base address for the default DS selector */
-    PM_segread(&sregs);
-    DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
-    if ((base < 0x100000) && (DSBaseAddr == 0)) {
-	/* DS is zero based, so we can directly access the first 1Mb of
-	 * system memory (like under DOS4GW).
-	 */
-	return (void*)base;
-	}
-
-    /* Map the memory to a linear address using DPMI function 0x800 */
-    if ((linAddr = DPMI_mapPhysicalToLinear(base,limit)) == 0) {
-	if (base >= 0x100000)
-	    return NULL;
-	/* If the linear address mapping fails but we are trying to
-	 * map an area in the first 1Mb of system memory, then we must
-	 * be running under a Windows or OS/2 DOS box. Under these
-	 * environments we can use the segment wrap around as a fallback
-	 * measure, as this does work properly.
-	 */
-	linAddr = base;
-	}
-
-    /* Now expand the default DS selector to 4Gb so we can access it */
-    if (!DPMI_setSelectorLimit(sregs.ds,0xFFFFFFFFUL))
-	return NULL;
-
-    /* Finally enable caching for the page tables that we just mapped in,
-     * since DOS4GW and PMODE/W create the page table entries without
-     * caching enabled which hurts the performance of the linear framebuffer
-     * as it disables write combining on Pentium Pro and above processors.
-     *
-     * For those processors cache disabling is better handled through the
-     * MTRR registers anyway (we can write combine a region but disable
-     * caching) so that MMIO register regions do not screw up.
-     */
-    if (isCached) {
-	if ((PDB = _PM_getPDB()) != 0 && DSBaseAddr == 0) {
-	    int     startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
-	    ulong   pageTable,*pPageTable;
-	    if (!pPDB) {
-		if (PDB >= 0x100000)
-		    pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
-		else
-		    pPDB = (ulong*)PDB;
-		}
-	    if (pPDB) {
-		startPDB = (linAddr >> 22) & 0x3FF;
-		startPage = (linAddr >> 12) & 0x3FF;
-		endPDB = ((linAddr+limit) >> 22) & 0x3FF;
-		endPage = ((linAddr+limit) >> 12) & 0x3FF;
-		for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
-		    pageTable = pPDB[iPDB] & ~0xFFF;
-		    if (pageTable >= 0x100000)
-			pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
-		    else
-			pPageTable = (ulong*)pageTable;
-		    start = (iPDB == startPDB) ? startPage : 0;
-		    end = (iPDB == endPDB) ? endPage : 0x3FF;
-		    for (iPage = start; iPage <= end; iPage++)
-			pPageTable[iPage] &= ~0x18;
-		    }
-		}
-	    }
-	}
-
-    /* Now return the base address of the memory into the default DS */
-    return (void*)(linAddr - DSBaseAddr);
-}
-
-/* Some DOS extender implementations do not directly support calling a
- * real mode procedure from protected mode. However we can simulate what
- * we need temporarily hooking the INT 6Ah vector with a small real mode
- * stub that will call our real mode code for us.
- */
-
-static uchar int6AHandler[] = {
-    0x00,0x00,0x00,0x00,        /*  __PMODE_callReal variable           */
-    0xFB,                       /*  sti                                 */
-    0x2E,0xFF,0x1E,0x00,0x00,   /*  call    [cs:__PMODE_callReal]       */
-    0xCF,                       /*  iretf                               */
-    };
-static uchar *crPtr = NULL; /* Pointer to of int 6A handler         */
-static uint crRSeg,crROff;  /* Real mode seg:offset of handler      */
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
-    RMSREGS *sregs)
-{
-    uchar   *p;
-    uint    oldSeg,oldOff;
-
-    if (!crPtr) {
-	/* Allocate and copy the memory block only once */
-	crPtr = PM_allocRealSeg(sizeof(int6AHandler), &crRSeg, &crROff);
-	memcpy(crPtr,int6AHandler,sizeof(int6AHandler));
-	}
-    PM_setWord(crPtr,off);              /* Plug in address to call  */
-    PM_setWord(crPtr+2,seg);
-    p = PM_mapRealPointer(0,0x6A * 4);
-    oldOff = PM_getWord(p);             /* Save old handler address */
-    oldSeg = PM_getWord(p+2);
-    PM_setWord(p,crROff+4);             /* Hook 6A handler          */
-    PM_setWord(p+2,crRSeg);
-    PM_int86x(0x6A, in, in, sregs);     /* Call real mode code      */
-    PM_setWord(p,oldOff);               /* Restore old handler      */
-    PM_setWord(p+2,oldSeg);
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return PM_mapPhysicalAddr(0x400,0xFFFF,true); }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{ return DPMI_mapPhysicalAddr(base,limit,isCached); }
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    /* Mapping cannot be free */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    (void)p;
-    return 0xFFFFFFFFUL;
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
-    (void)limit;
-    return (void*)base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
-    static uchar *zeroPtr = NULL;
-
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
-    return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
-    PMREGS      r;
-    void        *p;
-
-    r.x.ax = 0x100;                 /* DPMI allocate DOS memory         */
-    r.x.bx = (size + 0xF) >> 4;     /* number of paragraphs             */
-    PM_int386(0x31, &r, &r);
-    if (r.x.cflag)
-	return NULL;                /* DPMI call failed                 */
-    *r_seg = r.x.ax;                /* Real mode segment                */
-    *r_off = 0;
-    p = PM_mapRealPointer(*r_seg,*r_off);
-    _PM_addRealModeBlock(p,r.x.dx);
-    return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
-    PMREGS  r;
-
-    r.x.ax = 0x101;                     /* DPMI free DOS memory         */
-    r.x.dx = _PM_findRealModeBlock(mem);/* DX := selector from 0x100    */
-    PM_int386(0x31, &r, &r);
-}
-
-static DPMI_handler_t   DPMI_int10 = NULL;
-
-void PMAPI DPMI_setInt10Handler(DPMI_handler_t handler)
-{
-    DPMI_int10 = handler;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    PMREGS      r;
-    PMSREGS     sr;
-
-    if (intno == 0x10 && DPMI_int10) {
-	if (DPMI_int10(regs))
-	    return;
-	}
-    PM_segread(&sr);
-    r.x.ax = 0x300;                 /* DPMI issue real interrupt    */
-    r.h.bl = intno;
-    r.h.bh = 0;
-    r.x.cx = 0;
-    sr.es = sr.ds;
-    r.e.edi = (uint)regs;
-    PM_int386x(0x31, &r, &r, &sr);  /* Issue the interrupt          */
-}
-
-#define IN(reg)     rmregs.reg = in->e.reg
-#define OUT(reg)    out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
-/* These real mode ints may cause crashes. */
-/*AM:   DPMI_int86(intno,&rmregs);      /###* DPMI issue real interrupt    */
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
-    RMSREGS *sregs)
-{
-    DPMI_regs   rmregs;
-
-    memset(&rmregs, 0, sizeof(rmregs));
-    IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-    rmregs.es = sregs->es;
-    rmregs.ds = sregs->ds;
-
-/*AM:   DPMI_int86(intno,&rmregs);      /###* DPMI issue real interrupt    */
-
-    OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
-    sregs->es = rmregs.es;
-    sregs->cs = rmregs.cs;
-    sregs->ss = rmregs.ss;
-    sregs->ds = rmregs.ds;
-    out->x.cflag = rmregs.flags & 0x1;
-    return out->x.ax;
-}
-
-#pragma pack(1)
-
-typedef struct {
-	uint    LargestBlockAvail;
-	uint    MaxUnlockedPage;
-	uint    LargestLockablePage;
-	uint    LinAddrSpace;
-	uint    NumFreePagesAvail;
-	uint    NumPhysicalPagesFree;
-	uint    TotalPhysicalPages;
-	uint    FreeLinAddrSpace;
-	uint    SizeOfPageFile;
-	uint    res[3];
-	} MemInfo;
-
-#pragma pack()
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-    PMREGS  r;
-    PMSREGS sr;
-    MemInfo memInfo;
-
-    PM_segread(&sr);
-    r.x.ax = 0x500;                 /* DPMI get free memory info */
-    sr.es = sr.ds;
-    r.e.edi = (uint)&memInfo;
-    PM_int386x(0x31, &r, &r, &sr);  /* Issue the interrupt */
-    *physical = memInfo.NumPhysicalPagesFree * 4096;
-    *total = memInfo.LargestBlockAvail;
-    if (*total < *physical)
-	*physical = *total;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    /* TODO: Implement this! */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c b/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c
deleted file mode 100644
index 98e31bc638..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit SMX embedded systems development
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include "smx/ps2mouse.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int  globalDataStart;
-
-PM_criticalHandler  _VARAPI _PM_critHandler = NULL;
-PM_breakHandler     _VARAPI _PM_breakHandler = NULL;
-PM_intHandler       _VARAPI _PM_timerHandler = NULL;
-PM_intHandler       _VARAPI _PM_rtcHandler = NULL;
-PM_intHandler       _VARAPI _PM_keyHandler = NULL;
-PM_key15Handler     _VARAPI _PM_key15Handler = NULL;
-PM_mouseHandler     _VARAPI _PM_mouseHandler = NULL;
-PM_intHandler       _VARAPI _PM_int10Handler = NULL;
-int                 _VARAPI _PM_mouseMask;
-
-uchar *     _VARAPI _PM_ctrlCPtr;               /* Location of Ctrl-C flag      */
-uchar *     _VARAPI _PM_ctrlBPtr;               /* Location of Ctrl-Break flag  */
-uchar *     _VARAPI _PM_critPtr;                /* Location of Critical error Bf*/
-PMFARPTR    _VARAPI _PM_prevTimer = PMNULL;     /* Previous timer handler       */
-PMFARPTR    _VARAPI _PM_prevRTC = PMNULL;       /* Previous RTC handler         */
-PMFARPTR    _VARAPI _PM_prevKey = PMNULL;       /* Previous key handler         */
-PMFARPTR    _VARAPI _PM_prevKey15 = PMNULL;     /* Previous key15 handler       */
-PMFARPTR    _VARAPI _PM_prevBreak = PMNULL;     /* Previous break handler       */
-PMFARPTR    _VARAPI _PM_prevCtrlC = PMNULL;     /* Previous CtrlC handler       */
-PMFARPTR    _VARAPI _PM_prevCritical = PMNULL;  /* Previous critical handler    */
-long        _VARAPI _PM_prevRealTimer;          /* Previous real mode timer     */
-long        _VARAPI _PM_prevRealRTC;            /* Previous real mode RTC       */
-long        _VARAPI _PM_prevRealKey;            /* Previous real mode key       */
-long        _VARAPI _PM_prevRealKey15;          /* Previous real mode key15     */
-long        _VARAPI _PM_prevRealInt10;          /* Previous real mode int 10h   */
-static uchar        _PM_oldCMOSRegA;            /* CMOS register A contents     */
-static uchar        _PM_oldCMOSRegB;            /* CMOS register B contents     */
-static uchar        _PM_oldRTCPIC2;             /* Mask value for RTC IRQ8      */
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Globals for locking interrupt handlers in _pmsmx.asm */
-
-extern int  _ASMAPI _PM_pmsmxDataStart;
-extern int  _ASMAPI _PM_pmsmxDataEnd;
-void _ASMAPI _PM_pmsmxCodeStart(void);
-void _ASMAPI _PM_pmsmxCodeEnd(void);
-
-/* Protected mode interrupt handlers, also called by PM callbacks below */
-
-void _ASMAPI _PM_timerISR(void);
-void _ASMAPI _PM_rtcISR(void);
-void _ASMAPI _PM_keyISR(void);
-void _ASMAPI _PM_key15ISR(void);
-void _ASMAPI _PM_breakISR(void);
-void _ASMAPI _PM_ctrlCISR(void);
-void _ASMAPI _PM_criticalISR(void);
-void _ASMAPI _PM_mouseISR(void);
-void _ASMAPI _PM_int10PMCB(void);
-
-/* Protected mode DPMI callback handlers */
-
-void _ASMAPI _PM_mousePMCB(void);
-
-/* Routine to install a mouse handler function */
-
-void _ASMAPI _PM_setMouseHandler(int mask);
-
-/* Routine to allocate DPMI real mode callback routines */
-
-void _ASMAPI _DPMI_allocateCallback(void (_ASMAPI *pmcode)(),void *rmregs,long *RMCB);
-void _ASMAPI _DPMI_freeCallback(long RMCB);
-
-/* DPMI helper functions in PMLITE.C */
-
-ulong   PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit);
-int     PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr);
-ulong   PMAPI DPMI_getSelectorBase(ushort sel);
-int     PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit);
-uint    PMAPI DPMI_createSelector(ulong base,ulong limit);
-void    PMAPI DPMI_freeSelector(uint sel);
-int     PMAPI DPMI_lockLinearPages(ulong linear,ulong len);
-int     PMAPI DPMI_unlockLinearPages(ulong linear,ulong len);
-
-/* Functions to read and write CMOS registers */
-
-uchar   PMAPI _PM_readCMOS(int index);
-void    PMAPI _PM_writeCMOS(int index,uchar value);
-
-/*-------------------------------------------------------------------------*/
-/* Generic routines common to all environments                             */
-/*-------------------------------------------------------------------------*/
-
-void PMAPI PM_resetMouseDriver(int hardReset)
-{
-    ps2MouseReset();
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
-    static short convert[] = {
-	8192,
-	4096,
-	2048,
-	1024,
-	512,
-	256,
-	128,
-	64,
-	32,
-	16,
-	8,
-	4,
-	2,
-	-1,
-	};
-    int i;
-
-    /* First clear any pending RTC timeout if not cleared */
-    _PM_readCMOS(0x0C);
-    if (frequency == 0) {
-	/* Disable RTC timout */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
-	}
-    else {
-	/* Convert frequency value to RTC clock indexes */
-	for (i = 0; convert[i] != -1; i++) {
-	    if (convert[i] == frequency)
-		break;
-	    }
-
-	/* Set RTC timout value and enable timeout */
-	_PM_writeCMOS(0x0A,(_PM_oldCMOSRegA & 0xF0) | (i+3));
-	_PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
-	}
-}
-
-static void PMAPI lockPMHandlers(void)
-{
-    static int      locked = 0;
-    int             stat = 0;
-    PM_lockHandle   lh;
-
-    /* Lock all of the code and data used by our protected mode interrupt
-     * handling routines, so that it will continue to work correctly
-     * under real mode.
-     */
-    if (!locked) {
-	PM_saveDS();
-	stat  = !PM_lockDataPages(&globalDataStart-2048,4096,&lh);
-	stat |= !PM_lockDataPages(&_PM_pmsmxDataStart,(int)&_PM_pmsmxDataEnd - (int)&_PM_pmsmxDataStart,&lh);
-	stat |= !PM_lockCodePages((__codePtr)_PM_pmsmxCodeStart,(int)_PM_pmsmxCodeEnd-(int)_PM_pmsmxCodeStart,&lh);
-	if (stat) {
-	    printf("Page locking services failed - interrupt handling not safe!\n");
-	    exit(1);
-	    }
-	locked = 1;
-	}
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x204;
-    regs.h.bl = intno;
-    PM_int386(0x31,&regs,&regs);
-    isr->sel = regs.x.cx;
-    isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
-    PMSREGS sregs;
-    PMREGS  regs;
-
-    PM_saveDS();
-    regs.x.ax = 0x205;          /* Set protected mode vector        */
-    regs.h.bl = intno;
-    PM_segread(&sregs);
-    regs.x.cx = sregs.cs;
-    regs.e.edx = (uint)isr;
-    PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
-    PMREGS  regs;
-
-    regs.x.ax = 0x205;
-    regs.h.bl = intno;
-    regs.x.cx = isr.sel;
-    regs.e.edx = isr.off;
-    PM_int386(0x31,&regs,&regs);
-}
-
-static long prevRealBreak;      /* Previous real mode break handler     */
-static long prevRealCtrlC;      /* Previous real mode CtrlC handler     */
-static long prevRealCritical;   /* Prev real mode critical handler      */
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-
-    _PM_mouseHandler = mh;
-    return 0;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
-    if (_PM_mouseHandler)
-	_PM_mouseHandler = NULL;
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
-    PM_getPMvect(intno,pmisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
-    PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (* PMAPI pmisr)())
-{
-    lockPMHandlers();           /* Ensure our handlers are locked   */
-    PM_setPMvect(intno,pmisr);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
-    getISR(PM_IRQ0, &_PM_prevTimer, &_PM_prevRealTimer);
-    _PM_timerHandler = th;
-    setISR(PM_IRQ0, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
-    if (_PM_timerHandler) {
-	restoreISR(PM_IRQ0, _PM_prevTimer, _PM_prevRealTimer);
-	_PM_timerHandler = NULL;
-	}
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
-    _PM_rtcHandler = th;
-    setISR(0x70, _PM_rtcISR);
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC2 */
-    _PM_oldRTCPIC2 = PM_inpb(0xA1);
-    PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
-    return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (_PM_rtcHandler) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-	PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
-	/* Restore the interrupt vector */
-	restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
-	_PM_rtcHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
-    getISR(PM_IRQ1, &_PM_prevKey, &_PM_prevRealKey);
-    _PM_keyHandler = kh;
-    setISR(PM_IRQ1, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
-    if (_PM_keyHandler) {
-	restoreISR(PM_IRQ1, _PM_prevKey, _PM_prevRealKey);
-	_PM_keyHandler = NULL;
-	}
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
-    getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
-    _PM_key15Handler = kh;
-    setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
-    if (_PM_key15Handler) {
-	restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
-	_PM_key15Handler = NULL;
-	}
-}
-
-/* Real mode Ctrl-C and Ctrl-Break handler. This handler simply sets a
- * flag in the real mode code segment and exit. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-static uchar ctrlHandler[] = {
-    0x00,0x00,0x00,0x00,            /*  ctrlBFlag                       */
-    0x66,0x2E,0xC7,0x06,0x00,0x00,
-    0x01,0x00,0x00,0x00,            /*  mov     [cs:ctrlBFlag],1        */
-    0xCF,                           /*  iretf                           */
-    };
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-    uint    rseg,roff;
-
-    getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
-    getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
-    _PM_breakHandler = bh;
-    setISR(0x1B, _PM_breakISR);
-    setISR(0x23, _PM_ctrlCISR);
-
-    /* Hook the real mode vectors for these handlers, as these are not
-     * normally reflected by the DPMI server up to protected mode
-     */
-    _PM_ctrlBPtr = PM_allocRealSeg(sizeof(ctrlHandler)*2, &rseg, &roff);
-    memcpy(_PM_ctrlBPtr,ctrlHandler,sizeof(ctrlHandler));
-    memcpy(_PM_ctrlBPtr+sizeof(ctrlHandler),ctrlHandler,sizeof(ctrlHandler));
-    _PM_ctrlCPtr = _PM_ctrlBPtr + sizeof(ctrlHandler);
-    _PM_setRMvect(0x1B,((long)rseg << 16) | (roff+4));
-    _PM_setRMvect(0x23,((long)rseg << 16) | (roff+sizeof(ctrlHandler)+4));
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
-    PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
-    if (_PM_prevBreak.sel) {
-	restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
-	restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
-	_PM_prevBreak.sel = 0;
-	_PM_breakHandler = NULL;
-	PM_freeRealSeg(_PM_ctrlBPtr);
-	}
-}
-
-/* Real mode Critical Error handler. This handler simply saves the AX and
- * DI values in the real mode code segment and exits. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-static uchar criticalHandler[] = {
-    0x00,0x00,                      /*  axCode                          */
-    0x00,0x00,                      /*  diCode                          */
-    0x2E,0xA3,0x00,0x00,            /*  mov     [cs:axCode],ax          */
-    0x2E,0x89,0x3E,0x02,0x00,       /*  mov     [cs:diCode],di          */
-    0xB8,0x03,0x00,                 /*  mov     ax,3                    */
-    0xCF,                           /*  iretf                           */
-    };
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-    uint    rseg,roff;
-
-    getISR(0x24, &_PM_prevCritical, &prevRealCritical);
-    _PM_critHandler = ch;
-    setISR(0x24, _PM_criticalISR);
-
-    /* Hook the real mode vector, as this is not normally reflected by the
-     * DPMI server up to protected mode.
-     */
-    _PM_critPtr = PM_allocRealSeg(sizeof(criticalHandler)*2, &rseg, &roff);
-    memcpy(_PM_critPtr,criticalHandler,sizeof(criticalHandler));
-    _PM_setRMvect(0x24,((long)rseg << 16) | (roff+4));
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
-    PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
-    if (_PM_prevCritical.sel) {
-	restoreISR(0x24, _PM_prevCritical, prevRealCritical);
-	PM_freeRealSeg(_PM_critPtr);
-	_PM_prevCritical.sel = 0;
-	_PM_critHandler = NULL;
-	}
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-/*AM: causes minor glitch with */
-/*AM: older versions pmEasy which don't allow DPMI 06 on */
-/*AM: Code selector 0x0C -- assume base is 0 which it should be. */
-    return DPMI_lockLinearPages((uint)p,len);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    PMSREGS sregs;
-    PM_segread(&sregs);
-    return DPMI_unlockLinearPages((uint)p,len);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c
deleted file mode 100644
index 794119282e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit SMX embedded systems development
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*     LZTimer not supported for smx (as needed for i486 processors), only
-*     ULZTimer is supported at this time.
-*
-****************************************************************************/
-
-/*---------------------------- Global smx variables -----------------------*/
-
-extern ulong      _cdecl etime;     /* elapsed time */
-extern ulong      _cdecl xticks_per_second(void);
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-void    _ASMAPI LZ_disable(void);
-void    _ASMAPI LZ_enable(void);
-
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-ulong reterr(void)
-{
-   PM_fatalError("Zen Timer not supported for smx.");
-   return(0);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm)     PM_fatalError("Zen Timer not supported for smx.")
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerLap(tm)    reterr()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)    PM_fatalError("Zen Timer not supported for smx.")
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm)  reterr()
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as seconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     (ulong)(1000000/xticks_per_second())
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the smx timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    ulong   ticks;
-    LZ_disable();            /* Turn of interrupts               */
-    ticks = etime;
-    LZ_enable();             /* Turn on interrupts again         */
-    return ticks;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{
-    if (finish < start)
-	finish += xticks_per_second() * 3600 *24;       /* Number of ticks in 24 hours      */
-    return finish - start;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c
deleted file mode 100644
index 0615e90165..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  Module to implement OS specific services to measure the
-*               CPU frequency.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
-    /* TODO: If you have thread priorities, increase it to maximum for the */
-    /*       thread for timing the CPU frequency. */
-    return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
-    int priority)
-{
-    /* TODO: Restore the original thread priority on exit. */
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    /* TODO: Return the frequency of the counter in here. You should try to */
-    /*       normalise this value to be around 100,000 ticks per second. */
-    freq->low = 0;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-
-TODO: Implement this to read the counter. It should be done as a macro
-      for accuracy.
-****************************************************************************/
-#define GetCounter(t)               \
-{                                   \
-    (t)->low = 0;                   \
-    (t)->high = 0;                  \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/event.c b/board/MAI/bios_emulator/scitech/src/pm/stub/event.c
deleted file mode 100644
index 204c492540..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/event.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  **** implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-static int          rangeX,rangeY;      /* Range of mouse coordinates   */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-    /* TODO: Implement this for your OS! */
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
-    /* TODO: The purpose of this function is to read all keyboard and mouse */
-    /*       events from the OS specific event queue, translate them and post */
-    /*       them into the SciTech event queue. */
-    /* */
-    /* NOTE: There are a couple of important things that this function must */
-    /*       take care of: */
-    /* */
-    /*  1. Support for KEYDOWN, KEYREPEAT and KEYUP is required. */
-    /* */
-    /*  2. Support for reading hardware scan code as well as ASCII */
-    /*     translated values is required. Games use the scan codes rather */
-    /*     than ASCII values. Scan codes go into the high order byte of the */
-    /*     keyboard message field. */
-    /* */
-    /*  3. Support for at least reading mouse motion data (mickeys) from the */
-    /*     mouse is required. Using the mickey values, we can then translate */
-    /*     to mouse cursor coordinates scaled to the range of the current */
-    /*     graphics display mode. Mouse values are scaled based on the */
-    /*     global 'rangeX' and 'rangeY'. */
-    /* */
-    /*  4. Support for a timestamp for the events is required, which is */
-    /*     defined as the number of milliseconds since some event (usually */
-    /*     system startup). This is the timestamp when the event occurred */
-    /*     (ie: at interrupt time) not when it was stuff into the SciTech */
-    /*     event queue. */
-    /* */
-    /*  5. Support for mouse double click events. If the OS has a native */
-    /*     mechanism to determine this, it should be used. Otherwise the */
-    /*     time stamp information will be used by the generic event code */
-    /*     to generate double click events. */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    /* Initialise the event queue */
-    _mouseMove = mouseMove;
-    initEventQueue();
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* TODO: Do any OS specific initialisation here */
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-    /* TODO: Do any OS specific cleanup in here */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h
deleted file mode 100644
index 1395cbc3c4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  BeOS
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-/* TODO: This is where you include OS specific headers for the event handling */
-/*       library. You may leave this empty if you have no OS specific headers */
-/*       to include. */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c b/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c
deleted file mode 100644
index 5f278c32df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* TODO: Include any OS specific headers here! */
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* TODO: If you support access to the BIOS, the following VESABuf globals */
-/*       keep track of a single VESA transfer buffer. If you don't support */
-/*       access to the BIOS, remove these variables. */
-
-static uint VESABuf_len = 1024;     /* Length of the VESABuf buffer     */
-static void *VESABuf_ptr = NULL;    /* Near pointer to VESABuf          */
-static uint VESABuf_rseg;           /* Real mode segment of VESABuf     */
-static uint VESABuf_roff;           /* Real mode offset of VESABuf      */
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    /* TODO: Do any initialisation in here. This includes getting IOPL */
-    /*       access for the process calling PM_init. This will get called */
-    /*       more than once. */
-
-    /* TODO: If you support the supplied MTRR register stuff (you need to */
-    /*       be at ring 0 for this!), you should initialise it in here. */
-
-/* MTRR_init(); */
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
-    /* TODO: Change this to return the define for your OS from drvlib/os.h */
-    return _OS_MYOS;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier (always PM_386 for protected mode)
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
-    char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '/') {
-	s[pos] = '/';
-	s[pos+1] = '\0';
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
-    const char *msg)
-{
-    /* TODO: If you are running in a GUI environment without a console, */
-    /*       this needs to be changed to bring up a fatal error message */
-    /*       box and terminate the program. */
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    fprintf(stderr,"%s\n", msg);
-    exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Exit handler to kill the VESA transfer buffer.
-****************************************************************************/
-static void ExitVBEBuf(void)
-{
-    /* TODO: If you do not have BIOS access, remove this function. */
-    if (VESABuf_ptr)
-	PM_freeRealSeg(VESABuf_ptr);
-    VESABuf_ptr = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    /* TODO: If you do not have BIOS access, simply delete the guts of */
-    /*       this function and return NULL. */
-    if (!VESABuf_ptr) {
-	/* Allocate a global buffer for communicating with the VESA VBE */
-	if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
-	    return NULL;
-	atexit(ExitVBEBuf);
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
-    /* TODO: This function checks if a key is available to be read. This */
-    /*       should be implemented, but is mostly used by the test programs */
-    /*       these days. */
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
-    /* TODO: This returns the ASCII code of the key pressed. This */
-    /*       should be implemented, but is mostly used by the test programs */
-    /*       these days. */
-    return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Open a fullscreen console mode for output.
-****************************************************************************/
-int PMAPI PM_openConsole(void)
-{
-    /* TODO: Opens up a fullscreen console for graphics output. If your */
-    /*       console does not have graphics/text modes, this can be left */
-    /*       empty. The main purpose of this is to disable console switching */
-    /*       when in graphics modes if you can switch away from fullscreen */
-    /*       consoles (if you want to allow switching, this can be done */
-    /*       elsewhere with a full save/restore state of the graphics mode). */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the size of the state buffer used to save the console state.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* TODO: Returns the size of the console state buffer used to save the */
-    /*       state of the console before going into graphics mode. This is */
-    /*       used to restore the console back to normal when we are done. */
-    return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console into the state buffer.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
-    void *stateBuf,
-    int console_id)
-{
-    /* TODO: Saves the state of the console into the state buffer. This is */
-    /*       used to restore the console back to normal when we are done. */
-    /*       We will always restore 80x25 text mode after being in graphics */
-    /*       mode, so if restoring text mode is all you need to do this can */
-    /*       be left empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the state of the console from the state buffer.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
-    const void *stateBuf,
-    int console_id)
-{
-    /* TODO: Restore the state of the console from the state buffer. This is */
-    /*       used to restore the console back to normal when we are done. */
-    /*       We will always restore 80x25 text mode after being in graphics */
-    /*       mode, so if restoring text mode is all you need to do this can */
-    /*       be left empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Close the console and return to non-fullscreen console mode.
-****************************************************************************/
-void PMAPI PM_closeConsole(
-    int console_id)
-{
-    /* TODO: Close the console when we are done, going back to text mode. */
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    /* TODO: Set the OS console cursor location to the new value. This is */
-    /*       generally used for new OS ports (used mostly for DOS). */
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    /* TODO: Set the OS console screen width. This is generally unused for */
-    /*       new OS ports. */
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
-    PM_intHandler ih,
-    int frequency)
-{
-    /* TODO: Install a real time clock interrupt handler. Normally this */
-    /*       will not be supported from most OS'es in user land, so an */
-    /*       alternative mechanism is needed to enable software stereo. */
-    /*       Hence leave this unimplemented unless you have a high priority */
-    /*       mechanism to call the 32-bit callback when the real time clock */
-    /*       interrupt fires. */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    /* TODO: Set the real time clock interrupt frequency. Used for stereo */
-    /*       LC shutter glasses when doing software stereo. Usually sets */
-    /*       the frequency to around 2048 Hz. */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* TODO: Restores the real time clock handler. */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
-    /* TODO: Return the boot drive letter for the OS. Normally this is 'c' */
-    /*       for DOS based OS'es and '/' for Unices. */
-    return '/';
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files (legacy and not used).
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    return PM_getNucleusConfigPath();
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
-    /* TODO: Change this to the default path to Nucleus driver files. The */
-    /*       following is the default for Unices. */
-    char *env = getenv("NUCLEUS_PATH");
-    return env ? env : "/usr/lib/nucleus";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
-    /* TODO: Return a unique ID for the machine. If a unique ID is not */
-    /*       available, return the machine name. */
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
-    /* TODO: Return the network machine name for the machine. */
-    static char buf[128];
-    gethostname(buf, 128);
-    return buf;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
-    /* TODO: This returns a pointer to the real mode BIOS data area. If you */
-    /*       do not support BIOS access, you can simply return NULL here. */
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
-    return (void*)(zeroPtr + 0x400);
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
-    static void *bankPtr;
-    if (!bankPtr)
-	bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-    return bankPtr;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    /* TODO: This function maps a physical memory address to a linear */
-    /*       address in the address space of the calling process. */
-
-    /* NOTE: This function *must* be able to handle any phsyical base */
-    /*       address, and hence you will have to handle rounding of */
-    /*       the physical base address to a page boundary (ie: 4Kb on */
-    /*       x86 CPU's) to be able to properly map in the memory */
-    /*       region. */
-
-    /* NOTE: If possible the isCached bit should be used to ensure that */
-    /*       the PCD (Page Cache Disable) and PWT (Page Write Through) */
-    /*       bits are set to disable caching for a memory mapping used */
-    /*       for MMIO register access. We also disable caching using */
-    /*       the MTRR registers for Pentium Pro and later chipsets so if */
-    /*       MTRR support is enabled for your OS then you can safely ignore */
-    /*       the isCached flag and always enable caching in the page */
-    /*       tables. */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    /* TODO: This function will free a physical memory mapping previously */
-    /*       allocated with PM_mapPhysicalAddr() if at all possible. If */
-    /*       you can't free physical memory mappings, simply do nothing. */
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-    /* TODO: This function should find the physical address of a linear */
-    /*       address. */
-    return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of (unnamed) shared memory.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    /* TODO: This is used to allocate memory that is shared between process */
-    /*       that all access the common Nucleus drivers via a common display */
-    /*       driver DLL. If your OS does not support shared memory (or if */
-    /*       the display driver does not need to allocate shared memory */
-    /*       for each process address space), this should just call PM_malloc. */
-    return PM_malloc(size);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
-    void *ptr)
-{
-    /* TODO: Free the shared memory block. This will be called in the context */
-    /*       of the original calling process that allocated the shared */
-    /*       memory with PM_mallocShared. Simply call PM_free if you do not */
-    /*       need this. */
-    PM_free(ptr);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    /* TODO: This function is used to map a physical memory mapping */
-    /*       previously allocated with PM_mapPhysicalAddr into the */
-    /*       address space of the calling process. If the memory mapping */
-    /*       allocated by PM_mapPhysicalAddr is global to all processes, */
-    /*       simply return the pointer. */
-
-    /* NOTE: This function must also handle rounding to page boundaries, */
-    /*       since this function is used to map in shared memory buffers */
-    /*       allocated with PM_mapPhysicalAddr(). Hence if you aligned */
-    /*       the physical address above, then you also need to do it here. */
-    return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    /* TODO: This function maps a real mode memory pointer into the */
-    /*       calling processes address space as a 32-bit near pointer. If */
-    /*       you do not support BIOS access, simply return NULL here. */
-    if (!zeroPtr)
-	zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF);
-    return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    /* TODO: This function allocates a block of real mode memory for the */
-    /*       calling process used to communicate with real mode BIOS */
-    /*       functions. If you do not support BIOS access, simply return */
-    /*       NULL here. */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-    /* TODO: Frees a previously allocated real mode memory block. If you */
-    /*       do not support BIOS access, this function should be empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    /* TODO: This function calls the real mode BIOS using the passed in */
-    /*       register structure. If you do not support real mode BIOS */
-    /*       access, this function should be empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    /* TODO: This function calls the real mode BIOS using the passed in */
-    /*       register structure. If you do not support real mode BIOS */
-    /*       access, this function should return 0. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    /* TODO: This function calls the real mode BIOS using the passed in */
-    /*       register structure. If you do not support real mode BIOS */
-    /*       access, this function should return 0. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    /* TODO: This function calls a real mode far function with a far call. */
-    /*       If you do not support BIOS access, this function should be */
-    /*       empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    /* TODO: Report the amount of available memory, both the amount of */
-    /*       physical memory left and the amount of virtual memory left. */
-    /*       If the OS does not provide these services, report 0's. */
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    /* TODO: Allocate a block of locked, physical memory of the specified */
-    /*       size. This is used for bus master operations. If this is not */
-    /*       supported by the OS, return NULL and bus mastering will not */
-    /*       be used. */
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    /* TODO: Free a memory block allocated with PM_allocLockedMem. */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
-    int bank)
-{
-    RMREGS  regs;
-
-    /* TODO: This does a bank switch function by calling the real mode */
-    /*       VESA BIOS. If you do not support BIOS access, this function should */
-    /*       be empty. */
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0000;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
-    int bank)
-{
-    RMREGS  regs;
-
-    /* TODO: This does a bank switch function by calling the real mode */
-    /*       VESA BIOS. If you do not support BIOS access, this function should */
-    /*       be empty. */
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0000;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0001;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
-    int x,
-    int y,
-    int waitVRT)
-{
-    RMREGS  regs;
-
-    /* TODO: This changes the display start address by calling the real mode */
-    /*       VESA BIOS. If you do not support BIOS access, this function */
-    /*       should be empty. */
-    regs.x.ax = 0x4F07;
-    regs.x.bx = waitVRT;
-    regs.x.cx = x;
-    regs.x.dx = y;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Enable write combining for the memory region.
-****************************************************************************/
-ibool PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong length,
-    uint type)
-{
-    /* TODO: This function should enable Pentium Pro and Pentium II MTRR */
-    /*       write combining for the passed in physical memory base address */
-    /*       and length. Normally this is done via calls to an OS specific */
-    /*       device driver as this can only be done at ring 0. */
-    /* */
-    /* NOTE: This is a *very* important function to implement! If you do */
-    /*       not implement, graphics performance on the latest Intel chips */
-    /*       will be severly impaired. For sample code that can be used */
-    /*       directly in a ring 0 device driver, see the MSDOS implementation */
-    /*       which includes assembler code to do this directly (if the */
-    /*       program is running at ring 0). */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS)
-{
-    /* TODO: This function is used to run the BIOS POST code on a secondary */
-    /*       controller to initialise it for use. This is not necessary */
-    /*       for multi-controller operation, but it will make it a lot */
-    /*       more convenicent for end users (otherwise they have to boot */
-    /*       the system once with the secondary controller as primary, and */
-    /*       then boot with both controllers installed). */
-    /* */
-    /*       Even if you don't support full BIOS access, it would be */
-    /*       adviseable to be able to POST the secondary controllers in the */
-    /*       system using this function as a minimum requirement. Some */
-    /*       graphics hardware has registers that contain values that only */
-    /*       the BIOS knows about, which makes bring up a card from cold */
-    /*       reset difficult if the BIOS has not POST'ed it. */
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Load an OS specific shared library or DLL. If the OS does not support
-shared libraries, simply return NULL.
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    /* TODO: This function should load a native shared library from disk */
-    /*       given the path to the library. */
-    (void)szDLLName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Get the address of a named procedure from a shared library.
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    /* TODO: This function should return the address of a named procedure */
-    /*       from a native shared library. */
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Unload a shared library.
-****************************************************************************/
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    /* TODO: This function free a previously loaded native shared library. */
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Enable requested I/O privledge level (usually only to set to a value of
-3, and then restore it back again). If the OS is protected this function
-must be implemented in order to enable I/O port access for ring 3
-applications. The function should return the IOPL level active before
-the switch occurred so it can be properly restored.
-****************************************************************************/
-int PMAPI PM_setIOPL(
-    int level)
-{
-    /* TODO: This function should enable IOPL for the task (if IOPL is */
-    /*       not always enabled for the app through some other means). */
-    return level;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    /* TODO: This function should start a directory enumeration search */
-    /*       given the filename (with wildcards). The data should be */
-    /*       converted and returned in the findData standard form. */
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    /* TODO: This function should find the next file in directory enumeration */
-    /*       search given the search criteria defined in the call to */
-    /*       PM_findFirstFile. The data should be converted and returned */
-    /*       in the findData standard form. */
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    /* TODO: This function should close the find process. This may do */
-    /*       nothing for some OS'es. */
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    if (drive == 3)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    (void)drive;
-    getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    /* TODO: Set the file attributes for a file */
-    (void)filename;
-    (void)attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    return mkdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return rmdir(filename) == 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    baseAddr = baseAddr;
-    bankSize = bankSize;
-    codeLen = codeLen;
-    bankFunc = bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c
deleted file mode 100644
index 820e292390..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-    /* TODO: Do any specific internal initialisation in here */
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
-    LZTimerObject *tm)
-{
-    /* TODO: Start the Zen Timer counting. This should be a macro if */
-    /*       possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    /* TODO: Compute the lap time between the current time and when the */
-    /*       timer was started. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
-    LZTimerObject *tm)
-{
-    /* TODO: Stop the timer counting. Should be a macro if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    /* TODO: Compute the elapsed time and return it. Always microseconds. */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    /* TODO: Read the long period timer from the OS. The resolution of this */
-    /*       timer should be around 1/20 of a second for timing long */
-    /*       periods if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c b/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c
deleted file mode 100644
index ba90262745..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               control C/break interrupt handler. Note that this
-*               alternate version does not work with all extenders.
-*
-*               Functions tested:   PM_installAltBreakHandler()
-*                                   PM_restoreBreakHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile int breakHit = false;
-volatile int ctrlCHit = false;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-void PMAPI breakHandler(uint bHit)
-{
-    if (bHit)
-	breakHit = true;
-    else
-	ctrlCHit = true;
-}
-
-int main(void)
-{
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    PM_installAltBreakHandler(breakHandler);
-    printf("Control C/Break interrupt handler installed\n");
-    while (1) {
-	if (ctrlCHit) {
-	    printf("Code termimated with Ctrl-C.\n");
-	    break;
-	    }
-	if (breakHit) {
-	    printf("Code termimated with Ctrl-Break.\n");
-	    break;
-	    }
-	if (PM_kbhit() && PM_getch() == 0x1B) {
-	    printf("No break code detected!\n");
-	    break;
-	    }
-	printf("Hit Ctrl-C or Ctrl-Break to exit!\n");
-	}
-
-    PM_restoreBreakHandler();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c b/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c
deleted file mode 100644
index e13730758e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               critical error handler.
-*
-*               Functions tested:   PM_installCriticalHandler()
-*                                   PM_criticalError()
-*                                   PM_restoreCriticalHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile uint criticalError = false;
-volatile uint axValue;
-volatile uint diValue;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-uint PMAPI criticalHandler(uint axVal,uint diVal)
-{
-    criticalError = true;
-    axValue = axVal;
-    diValue = diVal;
-    return 3;       /* Tell MS-DOS to fail the operation */
-}
-
-int main(void)
-{
-    FILE    *f;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    PM_installAltCriticalHandler(criticalHandler);
-    printf("Critical Error handler installed - trying to read from A: drive...\n");
-    f = fopen("a:\bog.bog","rb");
-    if (f) fclose(f);
-    if (criticalError) {
-	printf("Critical error occured on INT 21h function %02X!\n",
-	    axValue >> 8);
-	}
-    else
-	printf("Critical error was not caught!\n");
-    PM_restoreCriticalHandler();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c b/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c
deleted file mode 100644
index 5fa3382483..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to manipulate the
-*               BIOS data area from protected mode using the PM
-*               library. Compile and link with the appropriate command
-*               line for your DOS extender.
-*
-*               Functions tested:   PM_getBIOSSelector()
-*                                   PM_getLong()
-*                                   PM_getByte()
-*                                   PM_getWord()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-/* Macros to obtain values from the BIOS data area */
-
-#define TICKS()     PM_getLong(bios+0x6C)
-#define KB_STAT     PM_getByte(bios+0x17)
-#define KB_HEAD     PM_getWord(bios+0x1A)
-#define KB_TAIL     PM_getWord(bios+0x1C)
-
-/* Macros for working with the keyboard buffer */
-
-#define KB_HIT()    (KB_HEAD != KB_TAIL)
-#define CTRL()      (KB_STAT & 4)
-#define SHIFT()     (KB_STAT & 2)
-#define ESC         0x1B
-
-/* Selector for BIOS data area */
-
-uchar *bios;
-
-int main(void)
-{
-    int c,done = 0;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    bios = PM_getBIOSPointer();
-    printf("Hit any key to test, Ctrl-Shift-Esc to quit\n");
-    while (!done) {
-	if (KB_HIT()) {
-	    c = PM_getch();
-	    if (c == 0) PM_getch();
-	    printf("TIME=%-8lX ST=%02X CHAR=%02X ", TICKS(), KB_STAT, c);
-	    printf("\n");
-	    if ((c == ESC) && SHIFT() && CTRL())/* Ctrl-Shift-Esc */
-		break;
-	    }
-	}
-
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/block.c b/board/MAI/bios_emulator/scitech/src/pm/tests/block.c
deleted file mode 100644
index 15d503c0de..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/block.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Test program for the PM_blockUntilTimeout function.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include "pmapi.h"
-
-#define DELAY_MSECS 1100
-#define LOOPS       5
-
-/*-------------------------- Implementation -------------------------------*/
-
-/* The following routine takes a long count in microseconds and outputs
- * a string representing the count in seconds. It could be modified to
- * return a pointer to a static string representing the count rather
- * than printing it out.
- */
-
-void ReportTime(ulong count)
-{
-    ulong   secs;
-
-    secs = count / 1000000L;
-    count = count - secs * 1000000L;
-    printf("Time taken: %lu.%06lu seconds\n",secs,count);
-}
-
-int main(void)
-{
-    int i;
-
-    printf("Detecting processor information ...");
-    fflush(stdout);
-    printf("\n\n%s\n", CPU_getProcessorName());
-    ZTimerInit();
-    LZTimerOn();
-    for (i = 0; i < LOOPS; i++) {
-	PM_blockUntilTimeout(DELAY_MSECS);
-	ReportTime(LZTimerLap());
-	}
-    LZTimerOff();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c b/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c
deleted file mode 100644
index 10b644656e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               control C/break interrupt handler.
-*
-*               Functions tested:   PM_installBreakHandler()
-*                                   PM_ctrlCHit()
-*                                   PM_ctrlBreakHit()
-*                                   PM_restoreBreakHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    PM_installBreakHandler();
-    printf("Control C/Break interrupt handler installed\n");
-    while (1) {
-	if (PM_ctrlCHit(1)) {
-	    printf("Code termimated with Ctrl-C.\n");
-	    break;
-	    }
-	if (PM_ctrlBreakHit(1)) {
-	    printf("Code termimated with Ctrl-Break.\n");
-	    break;
-	    }
-	if (PM_kbhit() && PM_getch() == 0x1B) {
-	    printf("No break code detected!\n");
-	    break;
-	    }
-	printf("Hit Ctrl-C or Ctrl-Break to exit!\n");
-	}
-
-    PM_restoreBreakHandler();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c b/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c
deleted file mode 100644
index 4d37cab465..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to call a real mode
-*               procedure. We simply copy a terribly simple assembly
-*               language routine into a real mode block that we allocate,
-*               and then attempt to call the routine and verify that it
-*               was successful.
-*
-*               Functions tested:   PM_allocRealSeg()
-*                                   PM_freeRealSeg()
-*                                   PM_callRealMode()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "pmapi.h"
-
-/* Block of real mode code we will eventually call */
-
-static unsigned char realModeCode[] = {
-    0x93,           /*  xchg    ax,bx   */
-    0x87, 0xCA,     /*  xchg    cx,dx   */
-    0xCB            /*  retf            */
-    };
-
-int main(void)
-{
-    RMREGS          regs;
-    RMSREGS         sregs;
-    uchar           *p;
-    unsigned        r_seg,r_off;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Allocate a the block of real mode memory */
-    if ((p = PM_allocRealSeg(sizeof(realModeCode), &r_seg, &r_off)) == NULL) {
-	printf("Unable to allocate real mode memory!\n");
-	exit(1);
-	}
-
-    /* Copy the real mode code */
-    memcpy(p,realModeCode,sizeof(realModeCode));
-
-    /* Now call the real mode code */
-    regs.x.ax = 1;
-    regs.x.bx = 2;
-    regs.x.cx = 3;
-    regs.x.dx = 4;
-    regs.x.si = 5;
-    regs.x.di = 6;
-    sregs.es = 7;
-    sregs.ds = 8;
-    PM_callRealMode(r_seg,r_off,&regs,&sregs);
-    if (regs.x.ax != 2 || regs.x.bx != 1 || regs.x.cx != 4 || regs.x.dx != 3
-	    || regs.x.si != 5 || regs.x.di != 6 || sregs.es != 7
-	    || sregs.ds != 8) {
-	printf("Real mode call failed!\n");
-	printf("\n");
-	printf("ax = %04X, bx = %04X, cx = %04X, dx = %04X\n",
-	    regs.x.ax,regs.x.bx,regs.x.cx,regs.x.dx);
-	printf("si = %04X, di = %04X, es = %04X, ds = %04X\n",
-	    regs.x.si,regs.x.di,sregs.es,sregs.ds);
-	}
-    else
-	printf("Real mode call succeeded!\n");
-
-    /* Free the memory we allocated */
-    PM_freeRealSeg(p);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c b/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c
deleted file mode 100644
index 5933ac9f73..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Main module for building checked builds of products with
-*               assertions and trace code.
-*
-****************************************************************************/
-
-#include "scitech.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#ifdef  __WINDOWS__
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-
-#ifdef  CHECKED
-
-/*---------------------------- Global variables ---------------------------*/
-
-#define LOGFILE "\\scitech.log"
-
-void (*_CHK_fail)(int fatal,const char *msg,const char *cond,const char *file,int line) = _CHK_defaultFail;
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Handles fatal error and warning conditions for checked builds.
-
-HEADER:
-scitech.h
-
-REMARKS:
-This function is called whenever an inline check or warning fails in any
-of the SciTech runtime libraries. Warning conditions simply cause the
-condition to be logged to the log file and send to the system debugger
-under Window. Fatal error conditions do all of the above, and then
-terminate the program with a fatal error conditions.
-
-This handler may be overriden by the user code if necessary to replace it
-with a different handler (the MGL for instance overrides this and replaces
-it with a handler that does an MGL_exit() before terminating the application
-so that it will clean up correctly.
-****************************************************************************/
-void _CHK_defaultFail(
-    int fatal,
-    const char *msg,
-    const char *cond,
-    const char *file,
-    int line)
-{
-    char    buf[256];
-    FILE    *log = fopen(LOGFILE, "at+");
-
-    sprintf(buf,msg,cond,file,line);
-    if (log) {
-	fputs(buf,log);
-	fflush(log);
-	fclose(log);
-#ifdef  __WINDOWS__
-	OutputDebugStr(buf);
-#endif
-	}
-    if (fatal) {
-#ifdef  __WINDOWS__
-	MessageBox(NULL, buf,"Fatal Error!",MB_ICONEXCLAMATION);
-#else
-	fputs(buf,stderr);
-#endif
-	exit(-1);
-	}
-}
-
-#endif  /* CHECKED */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c b/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c
deleted file mode 100644
index 30e5dd30df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Test program for the CPU detection code.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-int main(void)
-{
-    printf("Detecting processor information ...");
-    fflush(stdout);
-    printf("\n\n%s\n", CPU_getProcessorName());
-    if (CPU_haveRDTSC())
-	printf("\nProcessor supports Read Time Stamp Counter performance timer.\n");
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c b/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c
deleted file mode 100644
index 60f1251a5d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               critical error handler.
-*
-*               Functions tested:   PM_installAltCriticalHandler()
-*                                   PM_restoreCriticalHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
-    FILE    *f;
-    int     axcode,dicode;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    PM_installCriticalHandler();
-    printf("Critical Error handler installed - trying to read from A: drive...\n");
-    f = fopen("a:\bog.bog","rb");
-    if (f) fclose(f);
-    if (PM_criticalError(&axcode,&dicode,1)) {
-	printf("Critical error occured on INT 21h function %02X!\n",
-	    axcode >> 8);
-	}
-    else printf("Critical error was not caught!\n");
-    PM_restoreCriticalHandler();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c b/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c
deleted file mode 100644
index 06c2180ceb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Test program to test out the cross platform event handling
-*               library.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <ctype.h>
-#include "pmapi.h"
-#include "event.h"
-
-/* Translation table for key codes */
-
-typedef struct {
-    int     code;
-    char    *name;
-    } KeyEntry;
-
-KeyEntry ASCIICodes[] = {
-    {ASCII_ctrlA            ,"ASCII_ctrlA"},
-    {ASCII_ctrlB            ,"ASCII_ctrlB"},
-    {ASCII_ctrlC            ,"ASCII_ctrlC"},
-    {ASCII_ctrlD            ,"ASCII_ctrlD"},
-    {ASCII_ctrlE            ,"ASCII_ctrlE"},
-    {ASCII_ctrlF            ,"ASCII_ctrlF"},
-    {ASCII_ctrlG            ,"ASCII_ctrlG"},
-    {ASCII_backspace        ,"ASCII_backspace"},
-    {ASCII_ctrlH            ,"ASCII_ctrlH"},
-    {ASCII_tab              ,"ASCII_tab"},
-    {ASCII_ctrlI            ,"ASCII_ctrlI"},
-    {ASCII_ctrlJ            ,"ASCII_ctrlJ"},
-    {ASCII_ctrlK            ,"ASCII_ctrlK"},
-    {ASCII_ctrlL            ,"ASCII_ctrlL"},
-    {ASCII_enter            ,"ASCII_enter"},
-    {ASCII_ctrlM            ,"ASCII_ctrlM"},
-    {ASCII_ctrlN            ,"ASCII_ctrlN"},
-    {ASCII_ctrlO            ,"ASCII_ctrlO"},
-    {ASCII_ctrlP            ,"ASCII_ctrlP"},
-    {ASCII_ctrlQ            ,"ASCII_ctrlQ"},
-    {ASCII_ctrlR            ,"ASCII_ctrlR"},
-    {ASCII_ctrlS            ,"ASCII_ctrlS"},
-    {ASCII_ctrlT            ,"ASCII_ctrlT"},
-    {ASCII_ctrlU            ,"ASCII_ctrlU"},
-    {ASCII_ctrlV            ,"ASCII_ctrlV"},
-    {ASCII_ctrlW            ,"ASCII_ctrlW"},
-    {ASCII_ctrlX            ,"ASCII_ctrlX"},
-    {ASCII_ctrlY            ,"ASCII_ctrlY"},
-    {ASCII_ctrlZ            ,"ASCII_ctrlZ"},
-    {ASCII_esc              ,"ASCII_esc"},
-    {ASCII_space            ,"ASCII_space"},
-    {ASCII_exclamation      ,"ASCII_exclamation"},
-    {ASCII_quote            ,"ASCII_quote"},
-    {ASCII_pound            ,"ASCII_pound"},
-    {ASCII_dollar           ,"ASCII_dollar"},
-    {ASCII_percent          ,"ASCII_percent"},
-    {ASCII_ampersand        ,"ASCII_ampersand"},
-    {ASCII_apostrophe       ,"ASCII_apostrophe"},
-    {ASCII_leftBrace        ,"ASCII_leftBrace"},
-    {ASCII_rightBrace       ,"ASCII_rightBrace"},
-    {ASCII_times            ,"ASCII_times"},
-    {ASCII_plus             ,"ASCII_plus"},
-    {ASCII_comma            ,"ASCII_comma"},
-    {ASCII_minus            ,"ASCII_minus"},
-    {ASCII_period           ,"ASCII_period"},
-    {ASCII_divide           ,"ASCII_divide"},
-    {ASCII_0                ,"ASCII_0"},
-    {ASCII_1                ,"ASCII_1"},
-    {ASCII_2                ,"ASCII_2"},
-    {ASCII_3                ,"ASCII_3"},
-    {ASCII_4                ,"ASCII_4"},
-    {ASCII_5                ,"ASCII_5"},
-    {ASCII_6                ,"ASCII_6"},
-    {ASCII_7                ,"ASCII_7"},
-    {ASCII_8                ,"ASCII_8"},
-    {ASCII_9                ,"ASCII_9"},
-    {ASCII_colon            ,"ASCII_colon"},
-    {ASCII_semicolon        ,"ASCII_semicolon"},
-    {ASCII_lessThan         ,"ASCII_lessThan"},
-    {ASCII_equals           ,"ASCII_equals"},
-    {ASCII_greaterThan      ,"ASCII_greaterThan"},
-    {ASCII_question         ,"ASCII_question"},
-    {ASCII_at               ,"ASCII_at"},
-    {ASCII_A                ,"ASCII_A"},
-    {ASCII_B                ,"ASCII_B"},
-    {ASCII_C                ,"ASCII_C"},
-    {ASCII_D                ,"ASCII_D"},
-    {ASCII_E                ,"ASCII_E"},
-    {ASCII_F                ,"ASCII_F"},
-    {ASCII_G                ,"ASCII_G"},
-    {ASCII_H                ,"ASCII_H"},
-    {ASCII_I                ,"ASCII_I"},
-    {ASCII_J                ,"ASCII_J"},
-    {ASCII_K                ,"ASCII_K"},
-    {ASCII_L                ,"ASCII_L"},
-    {ASCII_M                ,"ASCII_M"},
-    {ASCII_N                ,"ASCII_N"},
-    {ASCII_O                ,"ASCII_O"},
-    {ASCII_P                ,"ASCII_P"},
-    {ASCII_Q                ,"ASCII_Q"},
-    {ASCII_R                ,"ASCII_R"},
-    {ASCII_S                ,"ASCII_S"},
-    {ASCII_T                ,"ASCII_T"},
-    {ASCII_U                ,"ASCII_U"},
-    {ASCII_V                ,"ASCII_V"},
-    {ASCII_W                ,"ASCII_W"},
-    {ASCII_X                ,"ASCII_X"},
-    {ASCII_Y                ,"ASCII_Y"},
-    {ASCII_Z                ,"ASCII_Z"},
-    {ASCII_leftSquareBrace  ,"ASCII_leftSquareBrace"},
-    {ASCII_backSlash        ,"ASCII_backSlash"},
-    {ASCII_rightSquareBrace ,"ASCII_rightSquareBrace"},
-    {ASCII_caret            ,"ASCII_caret"},
-    {ASCII_underscore       ,"ASCII_underscore"},
-    {ASCII_leftApostrophe   ,"ASCII_leftApostrophe"},
-    {ASCII_a                ,"ASCII_a"},
-    {ASCII_b                ,"ASCII_b"},
-    {ASCII_c                ,"ASCII_c"},
-    {ASCII_d                ,"ASCII_d"},
-    {ASCII_e                ,"ASCII_e"},
-    {ASCII_f                ,"ASCII_f"},
-    {ASCII_g                ,"ASCII_g"},
-    {ASCII_h                ,"ASCII_h"},
-    {ASCII_i                ,"ASCII_i"},
-    {ASCII_j                ,"ASCII_j"},
-    {ASCII_k                ,"ASCII_k"},
-    {ASCII_l                ,"ASCII_l"},
-    {ASCII_m                ,"ASCII_m"},
-    {ASCII_n                ,"ASCII_n"},
-    {ASCII_o                ,"ASCII_o"},
-    {ASCII_p                ,"ASCII_p"},
-    {ASCII_q                ,"ASCII_q"},
-    {ASCII_r                ,"ASCII_r"},
-    {ASCII_s                ,"ASCII_s"},
-    {ASCII_t                ,"ASCII_t"},
-    {ASCII_u                ,"ASCII_u"},
-    {ASCII_v                ,"ASCII_v"},
-    {ASCII_w                ,"ASCII_w"},
-    {ASCII_x                ,"ASCII_x"},
-    {ASCII_y                ,"ASCII_y"},
-    {ASCII_z                ,"ASCII_z"},
-    {ASCII_leftCurlyBrace   ,"ASCII_leftCurlyBrace"},
-    {ASCII_verticalBar      ,"ASCII_verticalBar"},
-    {ASCII_rightCurlyBrace  ,"ASCII_rightCurlyBrace"},
-    {ASCII_tilde            ,"ASCII_tilde"},
-    {0                      ,"ASCII_unknown"},
-    };
-
-KeyEntry ScanCodes[] = {
-    {KB_padEnter            ,"KB_padEnter"},
-    {KB_padMinus            ,"KB_padMinus"},
-    {KB_padPlus             ,"KB_padPlus"},
-    {KB_padTimes            ,"KB_padTimes"},
-    {KB_padDivide           ,"KB_padDivide"},
-    {KB_padLeft             ,"KB_padLeft"},
-    {KB_padRight            ,"KB_padRight"},
-    {KB_padUp               ,"KB_padUp"},
-    {KB_padDown             ,"KB_padDown"},
-    {KB_padInsert           ,"KB_padInsert"},
-    {KB_padDelete           ,"KB_padDelete"},
-    {KB_padHome             ,"KB_padHome"},
-    {KB_padEnd              ,"KB_padEnd"},
-    {KB_padPageUp           ,"KB_padPageUp"},
-    {KB_padPageDown         ,"KB_padPageDown"},
-    {KB_padCenter           ,"KB_padCenter"},
-    {KB_F1                  ,"KB_F1"},
-    {KB_F2                  ,"KB_F2"},
-    {KB_F3                  ,"KB_F3"},
-    {KB_F4                  ,"KB_F4"},
-    {KB_F5                  ,"KB_F5"},
-    {KB_F6                  ,"KB_F6"},
-    {KB_F7                  ,"KB_F7"},
-    {KB_F8                  ,"KB_F8"},
-    {KB_F9                  ,"KB_F9"},
-    {KB_F10                 ,"KB_F10"},
-    {KB_F11                 ,"KB_F11"},
-    {KB_F12                 ,"KB_F12"},
-    {KB_left                ,"KB_left"},
-    {KB_right               ,"KB_right"},
-    {KB_up                  ,"KB_up"},
-    {KB_down                ,"KB_down"},
-    {KB_insert              ,"KB_insert"},
-    {KB_delete              ,"KB_delete"},
-    {KB_home                ,"KB_home"},
-    {KB_end                 ,"KB_end"},
-    {KB_pageUp              ,"KB_pageUp"},
-    {KB_pageDown            ,"KB_pageDown"},
-    {KB_capsLock            ,"KB_capsLock"},
-    {KB_numLock             ,"KB_numLock"},
-    {KB_scrollLock          ,"KB_scrollLock"},
-    {KB_leftShift           ,"KB_leftShift"},
-    {KB_rightShift          ,"KB_rightShift"},
-    {KB_leftCtrl            ,"KB_leftCtrl"},
-    {KB_rightCtrl           ,"KB_rightCtrl"},
-    {KB_leftAlt             ,"KB_leftAlt"},
-    {KB_rightAlt            ,"KB_rightAlt"},
-    {KB_leftWindows         ,"KB_leftWindows"},
-    {KB_rightWindows        ,"KB_rightWindows"},
-    {KB_menu                ,"KB_menu"},
-    {KB_sysReq              ,"KB_sysReq"},
-    {KB_esc                 ,"KB_esc"},
-    {KB_1                   ,"KB_1"},
-    {KB_2                   ,"KB_2"},
-    {KB_3                   ,"KB_3"},
-    {KB_4                   ,"KB_4"},
-    {KB_5                   ,"KB_5"},
-    {KB_6                   ,"KB_6"},
-    {KB_7                   ,"KB_7"},
-    {KB_8                   ,"KB_8"},
-    {KB_9                   ,"KB_9"},
-    {KB_0                   ,"KB_0"},
-    {KB_minus               ,"KB_minus"},
-    {KB_equals              ,"KB_equals"},
-    {KB_backSlash           ,"KB_backSlash"},
-    {KB_backspace           ,"KB_backspace"},
-    {KB_tab                 ,"KB_tab"},
-    {KB_Q                   ,"KB_Q"},
-    {KB_W                   ,"KB_W"},
-    {KB_E                   ,"KB_E"},
-    {KB_R                   ,"KB_R"},
-    {KB_T                   ,"KB_T"},
-    {KB_Y                   ,"KB_Y"},
-    {KB_U                   ,"KB_U"},
-    {KB_I                   ,"KB_I"},
-    {KB_O                   ,"KB_O"},
-    {KB_P                   ,"KB_P"},
-    {KB_leftSquareBrace     ,"KB_leftSquareBrace"},
-    {KB_rightSquareBrace    ,"KB_rightSquareBrace"},
-    {KB_enter               ,"KB_enter"},
-    {KB_A                   ,"KB_A"},
-    {KB_S                   ,"KB_S"},
-    {KB_D                   ,"KB_D"},
-    {KB_F                   ,"KB_F"},
-    {KB_G                   ,"KB_G"},
-    {KB_H                   ,"KB_H"},
-    {KB_J                   ,"KB_J"},
-    {KB_K                   ,"KB_K"},
-    {KB_L                   ,"KB_L"},
-    {KB_semicolon           ,"KB_semicolon"},
-    {KB_apostrophe          ,"KB_apostrophe"},
-    {KB_Z                   ,"KB_Z"},
-    {KB_X                   ,"KB_X"},
-    {KB_C                   ,"KB_C"},
-    {KB_V                   ,"KB_V"},
-    {KB_B                   ,"KB_B"},
-    {KB_N                   ,"KB_N"},
-    {KB_M                   ,"KB_M"},
-    {KB_comma               ,"KB_comma"},
-    {KB_period              ,"KB_period"},
-    {KB_divide              ,"KB_divide"},
-    {KB_space               ,"KB_space"},
-    {KB_tilde               ,"KB_tilde"},
-    {0                      ,"KB_unknown"},
-    };
-
-/****************************************************************************
-PARAMETERS:
-x   - X coordinate of the mouse cursor position (screen coordinates)
-y   - Y coordinate of the mouse cursor position (screen coordinates)
-
-REMARKS:
-This gets called periodically to move the mouse. It will get called when
-the mouse may not have actually moved, so check if it has before redrawing
-it.
-****************************************************************************/
-void EVTAPI moveMouse(
-    int x,
-    int y)
-{
-}
-
-/****************************************************************************
-PARAMETERS:
-code    - Code to translate
-keys    - Table of translation key values to look up
-
-REMARKS:
-Simple function to look up the printable name for the keyboard code.
-****************************************************************************/
-KeyEntry *FindKey(
-    int code,
-    KeyEntry *keys)
-{
-    KeyEntry    *key;
-
-    for (key = keys; key->code != 0; key++) {
-	if (key->code == code)
-	    break;
-	}
-    return key;
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to display modifiers for
-
-REMARKS:
-Function to display shift modifiers flags
-****************************************************************************/
-void DisplayModifiers(
-    event_t *evt)
-{
-    if (evt->modifiers & EVT_LEFTBUT)
-	printf(", LBUT");
-    if (evt->modifiers & EVT_RIGHTBUT)
-	printf(", RBUT");
-    if (evt->modifiers & EVT_MIDDLEBUT)
-	printf(", MBUT");
-    if (evt->modifiers & EVT_SHIFTKEY) {
-	if (evt->modifiers & EVT_LEFTSHIFT)
-	    printf(", LSHIFT");
-	if (evt->modifiers & EVT_RIGHTSHIFT)
-	    printf(", RSHIFT");
-	}
-    if (evt->modifiers & EVT_CTRLSTATE) {
-	if (evt->modifiers & EVT_LEFTCTRL)
-	    printf(", LCTRL");
-	if (evt->modifiers & EVT_RIGHTCTRL)
-	    printf(", RCTRL");
-	}
-    if (evt->modifiers & EVT_ALTSTATE) {
-	if (evt->modifiers & EVT_LEFTALT)
-	    printf(", LALT");
-	if (evt->modifiers & EVT_RIGHTALT)
-	    printf(", RALT");
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the keyboard event to the screen.
-****************************************************************************/
-void DisplayKey(
-    char *msg,
-    event_t *evt)
-{
-    KeyEntry    *ascii,*scan;
-    char        ch = EVT_asciiCode(evt->message);
-
-    ascii = FindKey(ch,ASCIICodes);
-    scan = FindKey(EVT_scanCode(evt->message),ScanCodes);
-    printf("%s: 0x%04X -> %s, %s, '%c'",
-	msg, (int)evt->message & 0xFFFF, scan->name, ascii->name, isprint(ch) ? ch : ' ');
-    DisplayModifiers(evt);
-    printf("\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the mouse event to the screen.
-****************************************************************************/
-void DisplayMouse(
-    char *msg,
-    event_t *evt)
-{
-    printf("%s: ", msg);
-    if (evt->message & EVT_LEFTBMASK)
-	printf("LEFT ");
-    if (evt->message & EVT_RIGHTBMASK)
-	printf("RIGHT ");
-    if (evt->message & EVT_MIDDLEBMASK)
-	printf("MIDDLE ");
-    printf("abs(%d,%d), rel(%d,%d)", evt->where_x, evt->where_y, evt->relative_x, evt->relative_y);
-    DisplayModifiers(evt);
-    if (evt->message & EVT_DBLCLICK)
-	printf(", DBLCLICK");
-    printf("\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the joystick event to the screen.
-****************************************************************************/
-void DisplayJoy(
-    char *msg,
-    event_t *evt)
-{
-    printf("%s: Joy1(%4d,%4d,%c%c), Joy2(%4d,%4d,%c%c)\n", msg,
-	evt->where_x,evt->where_y,
-	(evt->message & EVT_JOY1_BUTTONA) ? 'A' : 'a',
-	(evt->message & EVT_JOY1_BUTTONB) ? 'B' : 'b',
-	evt->relative_x,evt->relative_y,
-	(evt->message & EVT_JOY2_BUTTONA) ? 'A' : 'a',
-	(evt->message & EVT_JOY2_BUTTONB) ? 'B' : 'b');
-}
-
-/****************************************************************************
-REMARKS:
-Joystick calibration routine
-****************************************************************************/
-void CalibrateJoy(void)
-{
-  event_t evt;
-  if(EVT_joyIsPresent()){
-    printf("Joystick Calibration\nMove the joystick to the upper left corner and press any button.\n");
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_joySetUpperLeft();
-    printf("Move the joystick to the lower right corner and press any button.\n");
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_joySetLowerRight();
-    printf("Move the joystick to center position and press any button.\n");
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_halt(&evt, EVT_JOYCLICK);
-    EVT_joySetCenter();
-    printf("Joystick calibrated\n");
-  }
-}
-
-/****************************************************************************
-REMARKS:
-Main program entry point
-****************************************************************************/
-int main(void)
-{
-    event_t     evt;
-    ibool       done = false;
-    PM_HWND     hwndConsole;
-
-    hwndConsole = PM_openConsole(0,0,0,0,0,true);
-    EVT_init(&moveMouse);
-    EVT_setMouseRange(1024,768);
-    CalibrateJoy();
-    do {
-	EVT_pollJoystick();
-	if (EVT_getNext(&evt,EVT_EVERYEVT)) {
-	    switch (evt.what) {
-		case EVT_KEYDOWN:
-		    DisplayKey("EVT_KEYDOWN  ", &evt);
-		    if (EVT_scanCode(evt.message) == KB_esc)
-			done = true;
-		    break;
-		case EVT_KEYREPEAT:
-		    DisplayKey("EVT_KEYREPEAT", &evt);
-		    break;
-		case EVT_KEYUP:
-		    DisplayKey("EVT_KEYUP    ", &evt);
-		    break;
-		case EVT_MOUSEDOWN:
-		    DisplayMouse("EVT_MOUSEDOWN", &evt);
-		    break;
-		case EVT_MOUSEAUTO:
-		    DisplayMouse("EVT_MOUSEAUTO", &evt);
-		    break;
-		case EVT_MOUSEUP:
-		    DisplayMouse("EVT_MOUSEUP  ", &evt);
-		    break;
-		case EVT_MOUSEMOVE:
-		    DisplayMouse("EVT_MOUSEMOVE", &evt);
-		    break;
-		case EVT_JOYCLICK:
-		    DisplayJoy("EVT_JOYCLICK ", &evt);
-		    break;
-		case EVT_JOYMOVE:
-		    DisplayJoy("EVT_JOYMOVE  ", &evt);
-		    break;
-		}
-	    }
-	} while (!done);
-    EVT_exit();
-    PM_closeConsole(hwndConsole);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c b/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c
deleted file mode 100644
index 67ad2456e8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to allocate real mode
-*               memory and to call real mode interrupt handlers such as
-*               the VESA VBE BIOS from protected mode. Compile and link
-*               with the appropriate command line for your DOS extender.
-*
-*               Functions tested:   PM_getVESABuf()
-*                                   PM_mapRealPointer()
-*                                   PM_int86x()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "pmapi.h"
-
-/* SuperVGA information block */
-
-#pragma pack(1)
-
-typedef struct {
-    char    VESASignature[4];       /* 'VESA' 4 byte signature          */
-    short   VESAVersion;            /* VBE version number               */
-    ulong   OEMStringPtr;           /* Far pointer to OEM string        */
-    ulong   Capabilities;           /* Capabilities of video card       */
-    ulong   VideoModePtr;           /* Far pointer to supported modes   */
-    short   TotalMemory;            /* Number of 64kb memory blocks     */
-    char    reserved[236];          /* Pad to 256 byte block size       */
-    } VgaInfoBlock;
-
-#pragma pack()
-
-int main(void)
-{
-    RMREGS          regs;
-    RMSREGS         sregs;
-    VgaInfoBlock    vgaInfo;
-    ushort          *mode;
-    uint            vgLen;
-    uchar           *vgPtr;
-    unsigned        r_vgseg,r_vgoff;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Allocate a 256 byte block of real memory for communicating with
-     * the VESA BIOS.
-     */
-    if ((vgPtr = PM_getVESABuf(&vgLen,&r_vgseg,&r_vgoff)) == NULL) {
-	printf("Unable to allocate VESA memory buffer!\n");
-	exit(1);
-	}
-
-    /* Call the VESA VBE to see if it is out there */
-    regs.x.ax = 0x4F00;
-    regs.x.di = r_vgoff;
-    sregs.es = r_vgseg;
-    memcpy(vgPtr,"VBE2",4);
-    PM_int86x(0x10, &regs, &regs, &sregs);
-    memcpy(&vgaInfo,vgPtr,sizeof(VgaInfoBlock));
-    if (regs.x.ax == 0x4F && strncmp(vgaInfo.VESASignature,"VESA",4) == 0) {
-	printf("VESA VBE version %d.%d BIOS detected\n\n",
-	    vgaInfo.VESAVersion >> 8, vgaInfo.VESAVersion & 0xF);
-	printf("Available video modes:\n");
-	mode = PM_mapRealPointer(vgaInfo.VideoModePtr >> 16, vgaInfo.VideoModePtr & 0xFFFF);
-	while (*mode != 0xFFFF) {
-	    printf("    %04hXh (%08X)\n", *mode, (int)mode);
-	    mode++;
-	    }
-	}
-    else
-	printf("VESA VBE not found\n");
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/key.c b/board/MAI/bios_emulator/scitech/src/pm/tests/key.c
deleted file mode 100644
index dba88853c2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/key.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               keyboard interrupt handler.
-*
-*               Functions tested:   PM_setKeyHandler()
-*                                   PM_chainPrevKey()
-*                                   PM_restoreKeyHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-void PMAPI keyHandler(void)
-{
-    count++;
-    PM_chainPrevKey();  /* Chain to previous handler    */
-}
-
-int main(void)
-{
-    int             ch;
-    PM_lockHandle   lh;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Install our timer handler and lock handler pages in memory. It is
-     * difficult to get the size of a function in C, but we know our
-     * function is well less than 100 bytes (and an entire 4k page will
-     * need to be locked by the server anyway).
-     */
-    PM_lockCodePages((__codePtr)keyHandler,100,&lh);
-    PM_lockDataPages((void*)&count,sizeof(count),&lh);
-    PM_installBreakHandler();           /* We *DONT* want Ctrl-Breaks! */
-    PM_setKeyHandler(keyHandler);
-    printf("Keyboard interrupt handler installed - Type some characters and\n");
-    printf("hit ESC to exit\n");
-    while ((ch = PM_getch()) != 0x1B) {
-	printf("%c", ch);
-	fflush(stdout);
-	}
-
-    PM_restoreKeyHandler();
-    PM_restoreBreakHandler();
-    PM_unlockDataPages((void*)&count,sizeof(count),&lh);
-    PM_unlockCodePages((__codePtr)keyHandler,100,&lh);
-    printf("\n\nKeyboard handler was called %ld times\n", count);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c b/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c
deleted file mode 100644
index b0b94be9c2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               keyboard Int 15h interrupt handler. This is an alternate
-*               way to intercept scancodes from the keyboard by hooking
-*               the Int 15h keyboard intercept callout.
-*
-*               Functions tested:   PM_setKey15Handler()
-*                                   PM_restoreKey15Handler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-volatile short lastScanCode = 0;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-short PMAPI keyHandler(short scanCode)
-{
-    count++;
-    lastScanCode = scanCode;
-    return scanCode;            /* Let BIOS process as normal */
-}
-
-int main(void)
-{
-    int             ch;
-    PM_lockHandle   lh;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Install our timer handler and lock handler pages in memory. It is
-     * difficult to get the size of a function in C, but we know our
-     * function is well less than 100 bytes (and an entire 4k page will
-     * need to be locked by the server anyway).
-     */
-    PM_lockCodePages((__codePtr)keyHandler,100,&lh);
-    PM_lockDataPages((void*)&count,sizeof(count),&lh);
-    PM_installBreakHandler();       /* We *DONT* want Ctrl-Break's! */
-    PM_setKey15Handler(keyHandler);
-    printf("Keyboard interrupt handler installed - Type some characters and\n");
-    printf("hit ESC to exit\n");
-    while ((ch = PM_getch()) != 0x1B) {
-	printf("%c", ch);
-	fflush(stdout);
-	}
-
-    PM_restoreKey15Handler();
-    PM_restoreBreakHandler();
-    PM_unlockDataPages((void*)&count,sizeof(count),&lh);
-    PM_unlockCodePages((__codePtr)keyHandler,100,&lh);
-    printf("\n\nKeyboard handler was called %ld times\n", count);
-    printf("Last scan code %04X\n", lastScanCode);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c b/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c
deleted file mode 100644
index a2c655b4a3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to determine just how much memory can be
-*               allocated with the compiler in use. Compile and link
-*               with the appropriate command line for your DOS extender.
-*
-*               Functions tested:   PM_malloc()
-*                                   PM_availableMemory()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-#include "pmapi.h"
-
-#ifdef  __16BIT__
-#define MAXALLOC    64
-#else
-#define MAXALLOC    2000
-#endif
-
-int main(void)
-{
-    int     i;
-    ulong   allocs;
-    ulong   physical,total;
-    char    *p,*pa[MAXALLOC];
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    printf("Memory available at start:\n");
-    PM_availableMemory(&physical,&total);
-    printf("   Physical memory:           %ld Kb\n", physical / 1024);
-    printf("   Total (including virtual): %ld Kb\n", total / 1024);
-    printf("\n");
-    for (allocs = i = 0; i < MAXALLOC; i++) {
-	if ((pa[i] = PM_malloc(10*1024)) != 0) {    /* in 10k blocks    */
-	    p = pa[allocs];
-	    memset(p, 0, 10*1024); /* touch every byte              */
-	    *p = 'x';           /* do something, anything with      */
-	    p[1023] = 'y';      /* the allocated memory             */
-	    allocs++;
-	    printf("Allocated %lu bytes\r", 10*(allocs << 10));
-	    }
-	else break;
-	if (PM_kbhit() && (PM_getch() == 0x1B))
-	    break;
-	}
-
-    printf("\n\nAllocated total of %lu bytes\n", 10 * (allocs << 10));
-
-    printf("\nMemory available at end:\n");
-    PM_availableMemory(&physical,&total);
-    printf("   Physical memory:           %ld Kb\n", physical / 1024);
-    printf("   Total (including virtual): %ld Kb\n", total / 1024);
-
-    for (i = allocs-1; i >= 0; i--)
-	PM_free(pa[i]);
-
-    printf("\nMemory available after freeing all blocks (note that under protected mode\n");
-    printf("this will most likely not be correct after freeing blocks):\n\n");
-    PM_availableMemory(&physical,&total);
-    printf("   Physical memory:           %ld Kb\n", physical / 1024);
-    printf("   Total (including virtual): %ld Kb\n", total / 1024);
-
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c b/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c
deleted file mode 100644
index 2765a0d1cc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install an assembly
-*               language mouse interrupt handler. We use assembly language
-*               as it must be a far function and should swap to a local
-*               32 bit stack if it is going to call any C based code (which
-*               we do in this example).
-*
-*               Functions tested:   PM_installMouseHandler()
-*                                   PM_int86()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-void PMAPI mouseHandler(
-    uint mask,
-    uint butstate,
-    int x,
-    int y,
-    int mickeyX,
-    int mickeyY)
-{
-    mask = mask;                /* We dont use any of the parameters    */
-    butstate = butstate;
-    x = x;
-    y = y;
-    mickeyX = mickeyX;
-    mickeyY = mickeyY;
-    count++;
-}
-
-int main(void)
-{
-    RMREGS          regs;
-    PM_lockHandle   lh;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    regs.x.ax = 33;     /* Mouse function 33 - Software reset       */
-    PM_int86(0x33,&regs,&regs);
-    if (regs.x.bx == 0) {
-	printf("No mouse installed.\n");
-	exit(1);
-	}
-
-    /* Install our mouse handler and lock handler pages in memory. It is
-     * difficult to get the size of a function in C, but we know our
-     * function is well less than 100 bytes (and an entire 4k page will
-     * need to be locked by the server anyway).
-     */
-    PM_lockCodePages((__codePtr)mouseHandler,100,&lh);
-    PM_lockDataPages((void*)&count,sizeof(count),&lh);
-    if (!PM_setMouseHandler(0xFFFF, mouseHandler)) {
-	printf("Unable to install mouse handler!\n");
-	exit(1);
-	}
-    printf("Mouse handler installed - Hit any key to exit\n");
-    PM_getch();
-
-    PM_restoreMouseHandler();
-    PM_unlockDataPages((void*)&count,sizeof(count),&lh);
-    PM_unlockCodePages((__codePtr)mouseHandler,100,&lh);
-    printf("Mouse handler was called %ld times\n", count);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c b/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c
deleted file mode 100644
index e00be750e3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux/QNX
-*
-* Description:  Program to restore the console state state from a previously
-*               saved state if the program crashed while the console
-*               was in graphics mode.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-void setVideoMode(int mode)
-{
-    RMREGS r;
-
-    r.x.ax = mode;
-    PM_int86(0x10, &r, &r);
-}
-
-int main(void)
-{
-    PM_HWND hwndConsole;
-    ulong   stateSize;
-    void    *stateBuf;
-    FILE    *f;
-
-    /* Write the saved console state buffer to disk */
-    if ((f = fopen("/etc/pmsave.dat","rb")) == NULL) {
-	printf("Unable to open /etc/pmsave.dat for reading!\n");
-	return -1;
-	}
-    fread(&stateSize,1,sizeof(stateSize),f);
-    if (stateSize != PM_getConsoleStateSize()) {
-	printf("Size mismatch in /etc/pmsave.dat!\n");
-	return -1;
-	}
-    if ((stateBuf = PM_malloc(stateSize)) == NULL) {
-	printf("Unable to allocate console state buffer!\n");
-	return -1;
-	}
-    fread(stateBuf,1,stateSize,f);
-    fclose(f);
-
-    /* Open the console */
-    hwndConsole = PM_openConsole(0,0,0,0,0,true);
-
-    /* Forcibly set 80x25 text mode using the BIOS */
-    setVideoMode(0x3);
-
-    /* Restore the previous console state */
-    PM_restoreConsoleState(stateBuf,0);
-    PM_closeConsole(hwndConsole);
-    PM_free(stateBuf);
-    printf("Console state successfully restored from /etc/pmsave.dat\n");
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c
deleted file mode 100644
index acef9226a8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               Real Time Clock interrupt handler.
-*
-*               Functions tested:   PM_setRealTimeClockHandler()
-*                                   PM_restoreRealTimeClockHandler()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-void PMAPI RTCHandler(void)
-{
-    count++;
-}
-
-int main(void)
-{
-    long            oldCount;
-    PM_lockHandle   lh;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Install our timer handler and lock handler pages in memory. It is
-     * difficult to get the size of a function in C, but we know our
-     * function is well less than 100 bytes (and an entire 4k page will
-     * need to be locked by the server anyway).
-     */
-    PM_lockCodePages((__codePtr)RTCHandler,100,&lh);
-    PM_lockDataPages((void*)&count,sizeof(count),&lh);
-    PM_installBreakHandler();           /* We *DONT* want Ctrl-Breaks! */
-    PM_setRealTimeClockHandler(RTCHandler,128);
-    printf("RealTimeClock interrupt handler installed - Hit ESC to exit\n");
-    oldCount = count;
-    while (1) {
-	if (PM_kbhit() && (PM_getch() == 0x1B))
-	    break;
-	if (count != oldCount) {
-	    printf("Tick, Tock: %ld\n", count);
-	    oldCount = count;
-	    }
-	}
-
-    PM_restoreRealTimeClockHandler();
-    PM_restoreBreakHandler();
-    PM_unlockDataPages((void*)&count,sizeof(count),&lh);
-    PM_unlockCodePages((__codePtr)RTCHandler,100,&lh);
-    printf("RealTimeClock handler was called %ld times\n", count);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/save.c b/board/MAI/bios_emulator/scitech/src/pm/tests/save.c
deleted file mode 100644
index f7324562f8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/save.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Linux/QNX
-*
-* Description:  Program to save the console state state so that it can
-*               be later restored if the program crashed while the console
-*               was in graphics mode.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
-    PM_HWND hwndConsole;
-    ulong   stateSize;
-    void    *stateBuf;
-    FILE    *f;
-
-    /* Allocate a buffer to save console state and save the state */
-    hwndConsole = PM_openConsole(0,0,0,0,0,true);
-    stateSize = PM_getConsoleStateSize();
-    if ((stateBuf = PM_malloc(stateSize)) == NULL) {
-	PM_closeConsole(hwndConsole);
-	printf("Unable to allocate console state buffer!\n");
-	return -1;
-	}
-    PM_saveConsoleState(stateBuf,0);
-
-    /* Restore the console state on exit */
-    PM_restoreConsoleState(stateBuf,0);
-    PM_closeConsole(hwndConsole);
-
-    /* Write the saved console state buffer to disk */
-    if ((f = fopen("/etc/pmsave.dat","wb")) == NULL)
-	printf("Unable to open /etc/pmsave/dat for writing!\n");
-    else {
-	fwrite(&stateSize,1,sizeof(stateSize),f);
-	fwrite(stateBuf,1,stateSize,f);
-	fclose(f);
-	printf("Console state successfully saved to /etc/pmsave.dat\n");
-	}
-    PM_free(stateBuf);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c b/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c
deleted file mode 100644
index be275e1a04..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to test the PCI library functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-static int              NumPCI = -1;
-static PCIDeviceInfo    *PCI;
-static int              *BridgeIndex;
-static int              *DeviceIndex;
-static int              NumBridges;
-static PCIDeviceInfo    *AGPBridge = NULL;
-static int              NumDevices;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Enumerates the PCI bus and dumps the PCI configuration information to the
-log file.
-****************************************************************************/
-static void EnumeratePCI(void)
-{
-    int             i,index;
-    PCIDeviceInfo   *info;
-
-    printf("Displaying enumeration of PCI bus (%d devices, %d display devices)\n",
-	NumPCI, NumDevices);
-    for (index = 0; index < NumDevices; index++)
-	printf("  Display device %d is PCI device %d\n",index,DeviceIndex[index]);
-    printf("\n");
-    printf("Bus Slot Fnc DeviceID  SubSystem Rev Class IRQ Int Cmd\n");
-    for (i = 0; i < NumPCI; i++) {
-	printf("%2d   %2d  %2d  %04X:%04X %04X:%04X %02X  %02X:%02X %02X  %02X  %04X   ",
-	    PCI[i].slot.p.Bus,
-	    PCI[i].slot.p.Device,
-	    PCI[i].slot.p.Function,
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].u.type0.SubSystemVendorID,
-	    PCI[i].u.type0.SubSystemID,
-	    PCI[i].RevID,
-	    PCI[i].BaseClass,
-	    PCI[i].SubClass,
-	    PCI[i].u.type0.InterruptLine,
-	    PCI[i].u.type0.InterruptPin,
-	    PCI[i].Command);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printf("<- %d\n", index);
-	else
-	    printf("\n");
-	}
-    printf("\n");
-    printf("DeviceID  Stat Ifc Cch Lat Hdr BIST\n");
-    for (i = 0; i < NumPCI; i++) {
-	printf("%04X:%04X %04X  %02X  %02X  %02X  %02X  %02X   ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].Status,
-	    PCI[i].Interface,
-	    PCI[i].CacheLineSize,
-	    PCI[i].LatencyTimer,
-	    PCI[i].HeaderType,
-	    PCI[i].BIST);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printf("<- %d\n", index);
-	else
-	    printf("\n");
-	}
-    printf("\n");
-    printf("DeviceID  Base10h  Base14h  Base18h  Base1Ch  Base20h  Base24h  ROMBase\n");
-    for (i = 0; i < NumPCI; i++) {
-	printf("%04X:%04X %08lX %08lX %08lX %08lX %08lX %08lX %08lX ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].u.type0.BaseAddress10,
-	    PCI[i].u.type0.BaseAddress14,
-	    PCI[i].u.type0.BaseAddress18,
-	    PCI[i].u.type0.BaseAddress1C,
-	    PCI[i].u.type0.BaseAddress20,
-	    PCI[i].u.type0.BaseAddress24,
-	    PCI[i].u.type0.ROMBaseAddress);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printf("<- %d\n", index);
-	else
-	    printf("\n");
-	}
-    printf("\n");
-    printf("DeviceID  BAR10Len BAR14Len BAR18Len BAR1CLen BAR20Len BAR24Len ROMLen\n");
-    for (i = 0; i < NumPCI; i++) {
-	printf("%04X:%04X %08lX %08lX %08lX %08lX %08lX %08lX %08lX ",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].u.type0.BaseAddress10Len,
-	    PCI[i].u.type0.BaseAddress14Len,
-	    PCI[i].u.type0.BaseAddress18Len,
-	    PCI[i].u.type0.BaseAddress1CLen,
-	    PCI[i].u.type0.BaseAddress20Len,
-	    PCI[i].u.type0.BaseAddress24Len,
-	    PCI[i].u.type0.ROMBaseAddressLen);
-	for (index = 0; index < NumDevices; index++) {
-	    if (DeviceIndex[index] == i)
-		break;
-	    }
-	if (index < NumDevices)
-	    printf("<- %d\n", index);
-	else
-	    printf("\n");
-	}
-    printf("\n");
-    printf("Displaying enumeration of %d bridge devices\n",NumBridges);
-    printf("\n");
-    printf("DeviceID  P# S# B# IOB  IOL  MemBase  MemLimit PreBase  PreLimit Ctrl\n");
-    for (i = 0; i < NumBridges; i++) {
-	info = (PCIDeviceInfo*)&PCI[BridgeIndex[i]];
-	printf("%04X:%04X %02X %02X %02X %04X %04X %08X %08X %08X %08X %04X\n",
-	    info->VendorID,
-	    info->DeviceID,
-	    info->u.type1.PrimaryBusNumber,
-	    info->u.type1.SecondayBusNumber,
-	    info->u.type1.SubordinateBusNumber,
-	    ((u16)info->u.type1.IOBase << 8) & 0xF000,
-	    info->u.type1.IOLimit ?
-		((u16)info->u.type1.IOLimit << 8) | 0xFFF : 0,
-	    ((u32)info->u.type1.MemoryBase << 16) & 0xFFF00000,
-	    info->u.type1.MemoryLimit ?
-		((u32)info->u.type1.MemoryLimit << 16) | 0xFFFFF : 0,
-	    ((u32)info->u.type1.PrefetchableMemoryBase << 16) & 0xFFF00000,
-	    info->u.type1.PrefetchableMemoryLimit ?
-		((u32)info->u.type1.PrefetchableMemoryLimit << 16) | 0xFFFFF : 0,
-	    info->u.type1.BridgeControl);
-	}
-    printf("\n");
-}
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
-    int             i,j;
-    PCIDeviceInfo   *info;
-
-    /* If this is the first time we have been called, enumerate all */
-    /* devices on the PCI bus. */
-    if (NumPCI == -1) {
-	if ((NumPCI = PCI_getNumDevices()) == 0)
-	    return -1;
-	PCI = malloc(NumPCI * sizeof(PCI[0]));
-	BridgeIndex = malloc(NumPCI * sizeof(BridgeIndex[0]));
-	DeviceIndex = malloc(NumPCI * sizeof(DeviceIndex[0]));
-	if (!PCI || !BridgeIndex || !DeviceIndex)
-	    return -1;
-	for (i = 0; i < NumPCI; i++)
-	    PCI[i].dwSize = sizeof(PCI[i]);
-	if (PCI_enumerate(PCI) == 0)
-	    return -1;
-
-	/* Build a list of all PCI bridge devices */
-	for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI[i].BaseClass == PCI_BRIDGE_CLASS)
-		BridgeIndex[NumBridges++] = i;
-	    }
-
-	/* Now build a list of all display class devices */
-	for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
-		if ((PCI[i].Command & 0x3) == 0x3)
-		    DeviceIndex[0] = i;
-		else
-		    DeviceIndex[NumDevices++] = i;
-		if (PCI[i].slot.p.Bus != 0) {
-		    /* This device is on a different bus than the primary */
-		    /* PCI bus, so it is probably an AGP device. Find the */
-		    /* AGP bus device that controls that bus so we can */
-		    /* control it. */
-		    for (j = 0; j < NumBridges; j++) {
-			info = (PCIDeviceInfo*)&PCI[BridgeIndex[j]];
-			if (info->u.type1.SecondayBusNumber == PCI[i].slot.p.Bus) {
-			    AGPBridge = info;
-			    break;
-			    }
-			}
-		    }
-		}
-	    }
-
-	/* Enumerate all PCI and bridge devices to standard output */
-	EnumeratePCI();
-	}
-    return NumDevices;
-}
-
-int main(void)
-{
-    /* Enumerate all PCI devices */
-    PM_init();
-    if (PCI_enumerateDevices() < 1) {
-	printf("No PCI display devices found!\n");
-	return -1;
-	}
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c b/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c
deleted file mode 100644
index 378725ebe6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to install a C based
-*               timer interrupt handler.
-*
-*               Functions tested:   PM_setTimerHandler()
-*                                   PM_chainPrevTimer();
-*                                   PM_restoreTimerHandler()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack)           /* No stack checking under Watcom   */
-
-void PMAPI timerHandler(void)
-{
-    PM_chainPrevTimer();        /* Chain to previous handler */
-    count++;
-}
-
-int main(void)
-{
-    long            oldCount;
-    PM_lockHandle   lh;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    /* Install our timer handler and lock handler pages in memory. It is
-     * difficult to get the size of a function in C, but we know our
-     * function is well less than 100 bytes (and an entire 4k page will
-     * need to be locked by the server anyway).
-     */
-    PM_lockCodePages((__codePtr)timerHandler,100,&lh);
-    PM_lockDataPages((void*)&count,sizeof(count),&lh);
-    PM_installBreakHandler();           /* We *DONT* want Ctrl-Breaks! */
-    PM_setTimerHandler(timerHandler);
-    printf("Timer interrupt handler installed - Hit ESC to exit\n");
-    oldCount = count;
-    while (1) {
-	if (PM_kbhit() && (PM_getch() == 0x1B))
-	    break;
-	if (count != oldCount) {
-	    printf("Tick, Tock: %ld\n", count);
-	    oldCount = count;
-	    }
-	}
-
-    PM_restoreTimerHandler();
-    PM_restoreBreakHandler();
-    PM_unlockDataPages((void*)&count,sizeof(count),&lh);
-    PM_unlockCodePages((__codePtr)timerHandler,100,&lh);
-    printf("Timer handler was called %ld times\n", count);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c
deleted file mode 100644
index 7fa77b77b8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Test program for the Zen Timer Library.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include "pmapi.h"
-#include "ztimer.h"
-
-#define DELAY_SECS  10
-
-/*-------------------------- Implementation -------------------------------*/
-
-/* The following routine takes a long count in microseconds and outputs
- * a string representing the count in seconds. It could be modified to
- * return a pointer to a static string representing the count rather
- * than printing it out.
- */
-
-void ReportTime(ulong count)
-{
-    ulong   secs;
-
-    secs = count / 1000000L;
-    count = count - secs * 1000000L;
-    printf("Time taken: %lu.%06lu seconds\n",secs,count);
-}
-
-int     i,j;                                /* NON register variables! */
-
-int main(void)
-{
-#ifdef  LONG_TEST
-    ulong   start,finish;
-#endif
-
-    printf("Processor type: %d %ld MHz\n", CPU_getProcessorType(), CPU_getProcessorSpeed(true));
-
-    ZTimerInit();
-
-    /* Test the long period Zen Timer (we don't check for overflow coz
-     * it would take tooooo long!)
-     */
-
-    LZTimerOn();
-    for (j = 0; j < 10; j++)
-	for (i = 0; i < 20000; i++)
-	    i = i;
-    LZTimerOff();
-    ReportTime(LZTimerCount());
-
-    /* Test the ultra long period Zen Timer */
-#ifdef LONG_TEST
-    start = ULZReadTime();
-    delay(DELAY_SECS * 1000);
-    finish = ULZReadTime();
-    printf("Delay of %d secs took %d 1/10ths of a second\n",
-	DELAY_SECS,ULZElapsedTime(start,finish));
-#endif
-
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp b/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp
deleted file mode 100644
index 1258a4bb10..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     C++ 3.0
-* Environment:  Any
-*
-* Description:  Test program for the Zen Timer Library C++ interface.
-*
-****************************************************************************/
-
-#include <iostream.h>
-#include "pmapi.h"
-#include "ztimer.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-int     i,j,k;                              /* NON register variables! */
-
-void dummy() {}
-
-int main(void)
-{
-    LZTimer     ltimer;
-    ULZTimer    ultimer;
-
-    ZTimerInit();
-
-    /* Test the long period Zen Timer (we don't check for overflow coz
-     * it would take tooooo long!)
-     */
-
-    cout << endl;
-    ultimer.restart();
-    ltimer.start();
-    for (j = 0; j < 10; j++)
-        for (i = 0; i < 20000; i++)
-            dummy();
-    ltimer.stop();
-    ultimer.stop();
-    cout << "LCount:  " << ltimer.count() << endl;
-    cout << "Time:    " << ltimer << " secs\n";
-    cout << "ULCount: " << ultimer.count() << endl;
-    cout << "ULTime:  " << ultimer << " secs\n";
-
-    cout << endl << "Timing ... \n";
-    ultimer.restart();
-    ltimer.restart();
-    for (j = 0; j < 200; j++)
-        for (i = 0; i < 20000; i++)
-            dummy();
-    ltimer.stop();
-    ultimer.stop();
-    cout << "LCount:  " << ltimer.count() << endl;
-    cout << "Time:    " << ltimer << " secs\n";
-    cout << "ULCount: " << ultimer.count() << endl;
-    cout << "ULTime:  " << ultimer << " secs\n";
-
-    /* Test the lap function of the long period Zen Timer */
-
-    cout << endl << "Timing ... \n";
-    ultimer.restart();
-    ltimer.restart();
-    for (j = 0; j < 20; j++) {
-        for (k = 0; k < 10; k++)
-            for (i = 0; i < 20000; i++)
-                dummy();
-        cout << "lap: " << ltimer.lap() << endl;
-        }
-    ltimer.stop();
-    ultimer.stop();
-    cout << "LCount:  " << ltimer.count() << endl;
-    cout << "Time:    " << ltimer << " secs\n";
-    cout << "ULCount: " << ultimer.count() << endl;
-    cout << "ULTime:  " << ultimer << " secs\n";
-
-#ifdef  LONG_TEST
-    /* Test the ultra long period Zen Timer */
-
-    ultimer.start();
-    delay(DELAY_SECS * 1000);
-    ultimer.stop();
-    cout << "Delay of " << DELAY_SECS << " secs took " << ultimer.count()
-         << " 1/10ths of a second\n";
-    cout << "Time: " << ultimer << " secs\n";
-#endif
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c
deleted file mode 100644
index f0c7bd6311..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Simple test program to test the write combine functions.
-*
-*               Note that this program should never be used in a production
-*               environment, because write combining needs to be handled
-*               with more intimate knowledge of the display hardware than
-*               you can obtain by simply examining the PCI configuration
-*               space.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-static int              NumPCI = -1;
-static PCIDeviceInfo    *PCI;
-static int              *BridgeIndex;
-static int              *DeviceIndex;
-static int              NumBridges;
-static PCIDeviceInfo    *AGPBridge = NULL;
-static int              NumDevices;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
-    int             i,j;
-    PCIDeviceInfo   *info;
-
-    /* If this is the first time we have been called, enumerate all */
-    /* devices on the PCI bus. */
-    if (NumPCI == -1) {
-	if ((NumPCI = PCI_getNumDevices()) == 0)
-	    return -1;
-	PCI = malloc(NumPCI * sizeof(PCI[0]));
-	BridgeIndex = malloc(NumPCI * sizeof(BridgeIndex[0]));
-	DeviceIndex = malloc(NumPCI * sizeof(DeviceIndex[0]));
-	if (!PCI || !BridgeIndex || !DeviceIndex)
-	    return -1;
-	for (i = 0; i < NumPCI; i++)
-	    PCI[i].dwSize = sizeof(PCI[i]);
-	if (PCI_enumerate(PCI) == 0)
-	    return -1;
-
-	/* Build a list of all PCI bridge devices */
-	for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI[i].BaseClass == PCI_BRIDGE_CLASS)
-		BridgeIndex[NumBridges++] = i;
-	    }
-
-	/* Now build a list of all display class devices */
-	for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
-	    if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
-		if ((PCI[i].Command & 0x3) == 0x3)
-		    DeviceIndex[0] = i;
-		else
-		    DeviceIndex[NumDevices++] = i;
-		if (PCI[i].slot.p.Bus != 0) {
-		    /* This device is on a different bus than the primary */
-		    /* PCI bus, so it is probably an AGP device. Find the */
-		    /* AGP bus device that controls that bus so we can */
-		    /* control it. */
-		    for (j = 0; j < NumBridges; j++) {
-			info = (PCIDeviceInfo*)&PCI[BridgeIndex[j]];
-			if (info->u.type1.SecondayBusNumber == PCI[i].slot.p.Bus) {
-			    AGPBridge = info;
-			    break;
-			    }
-			}
-		    }
-		}
-	    }
-	}
-    return NumDevices;
-}
-
-/****************************************************************************
-REMARKS:
-Enumerates useful information about attached display devices.
-****************************************************************************/
-static void ShowDisplayDevices(void)
-{
-    int i,index;
-
-    printf("Displaying enumeration of %d PCI display devices\n", NumDevices);
-    printf("\n");
-    printf("DeviceID  SubSystem  Base10h  (length  )  Base14h  (length  )\n");
-    for (index = 0; index < NumDevices; index++) {
-	i = DeviceIndex[index];
-	printf("%04X:%04X %04X:%04X  %08lX (%6ld KB) %08lX (%6ld KB)\n",
-	    PCI[i].VendorID,
-	    PCI[i].DeviceID,
-	    PCI[i].u.type0.SubSystemVendorID,
-	    PCI[i].u.type0.SubSystemID,
-	    PCI[i].u.type0.BaseAddress10,
-	    PCI[i].u.type0.BaseAddress10Len / 1024,
-	    PCI[i].u.type0.BaseAddress14,
-	    PCI[i].u.type0.BaseAddress14Len / 1024);
-	}
-    printf("\n");
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static char *DecodeWCType(
-    uint type)
-{
-    static char *names[] = {
-	"UNCACHABLE",
-	"WRCOMB",
-	"UNKNOWN",
-	"UNKNOWN",
-	"WRTHROUGH",
-	"WRPROT",
-	"WRBACK",
-	};
-    if (type <= PM_MTRR_MAX)
-	return names[type];
-    return "UNKNOWN";
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void PMAPI EnumWriteCombine(
-    ulong base,
-    ulong length,
-    uint type)
-{
-    printf("%08lX %-10ld %s\n", base, length / 1024, DecodeWCType(type));
-}
-
-/****************************************************************************
-PARAMETERS:
-err - Error to log
-
-REMARKS:
-Function to log an error message if the MTRR write combining attempt failed.
-****************************************************************************/
-static void LogMTRRError(
-    int err)
-{
-    if (err == PM_MTRR_ERR_OK)
-	return;
-    switch (err) {
-	case PM_MTRR_NOT_SUPPORTED:
-	    printf("Failed: MTRR is not supported by host CPU\n");
-	    break;
-	case PM_MTRR_ERR_PARAMS:
-	    printf("Failed: Invalid parameters passed to PM_enableWriteCombined!\n");
-	    break;
-	case PM_MTRR_ERR_NOT_4KB_ALIGNED:
-	    printf("Failed: Address is not 4Kb aligned!\n");
-	    break;
-	case PM_MTRR_ERR_BELOW_1MB:
-	    printf("Failed: Addresses below 1Mb cannot be write combined!\n");
-	    break;
-	case PM_MTRR_ERR_NOT_ALIGNED:
-	    printf("Failed: Address is not correctly aligned for processor!\n");
-	    break;
-	case PM_MTRR_ERR_OVERLAP:
-	    printf("Failed: Address overlaps an existing region!\n");
-	    break;
-	case PM_MTRR_ERR_TYPE_MISMATCH:
-	    printf("Failed: Adress is contained with existing region, but type is different!\n");
-	    break;
-	case PM_MTRR_ERR_NONE_FREE:
-	    printf("Failed: Out of MTRR registers!\n");
-	    break;
-	case PM_MTRR_ERR_NOWRCOMB:
-	    printf("Failed: This processor does not support write combining!\n");
-	    break;
-	case PM_MTRR_ERR_NO_OS_SUPPORT:
-	    printf("Failed: MTRR is not supported by host OS\n");
-	    break;
-	default:
-	    printf("Failed: UNKNOWN ERROR!\n");
-	    break;
-	}
-    exit(-1);
-}
-
-/****************************************************************************
-REMARKS:
-Shows all write combine regions.
-****************************************************************************/
-static void ShowWriteCombine(void)
-{
-    printf("Base     Length(KB) Type\n");
-    LogMTRRError(PM_enumWriteCombine(EnumWriteCombine));
-    printf("\n");
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void EnableWriteCombine(void)
-{
-    int i,index;
-
-    for (index = 0; index < NumDevices; index++) {
-	i = DeviceIndex[index];
-	if (PCI[i].u.type0.BaseAddress10 & 0x8) {
-	    LogMTRRError(PM_enableWriteCombine(
-		PCI[i].u.type0.BaseAddress10 & 0xFFFFFFF0,
-		PCI[i].u.type0.BaseAddress10Len,
-		PM_MTRR_WRCOMB));
-	    }
-	if (PCI[i].u.type0.BaseAddress14 & 0x8) {
-	    LogMTRRError(PM_enableWriteCombine(
-		PCI[i].u.type0.BaseAddress14 & 0xFFFFFFF0,
-		PCI[i].u.type0.BaseAddress14Len,
-		PM_MTRR_WRCOMB));
-	    }
-	}
-    printf("\n");
-    ShowDisplayDevices();
-    ShowWriteCombine();
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void DisableWriteCombine(void)
-{
-    int i,index;
-
-    for (index = 0; index < NumDevices; index++) {
-	i = DeviceIndex[index];
-	if (PCI[i].u.type0.BaseAddress10 & 0x8) {
-	    LogMTRRError(PM_enableWriteCombine(
-		PCI[i].u.type0.BaseAddress10 & 0xFFFFFFF0,
-		PCI[i].u.type0.BaseAddress10Len,
-		PM_MTRR_UNCACHABLE));
-	    }
-	if (PCI[i].u.type0.BaseAddress14 & 0x8) {
-	    LogMTRRError(PM_enableWriteCombine(
-		PCI[i].u.type0.BaseAddress14 & 0xFFFFFFF0,
-		PCI[i].u.type0.BaseAddress14Len,
-		PM_MTRR_UNCACHABLE));
-	    }
-	}
-    printf("\n");
-    ShowDisplayDevices();
-    ShowWriteCombine();
-}
-
-int main(int argc,char *argv[])
-{
-    PM_init();
-    if (PCI_enumerateDevices() < 1) {
-	printf("No PCI display devices found!\n");
-	return -1;
-	}
-    if (argc < 2) {
-	printf("usage: uswc [-show -on -off]\n\n");
-	ShowDisplayDevices();
-	return -1;
-	}
-    if (stricmp(argv[1],"-show") == 0)
-	ShowWriteCombine();
-    else if (stricmp(argv[1],"-on") == 0)
-	EnableWriteCombine();
-    else if (stricmp(argv[1],"-off") == 0)
-	DisableWriteCombine();
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c b/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c
deleted file mode 100644
index b7e3bb7846..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Filename:     $Workfile$
-* Version:      $Revision: 1.1 $
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to test the VFlat virtual framebuffer functions.
-*
-*               Functions tested:   VF_available()
-*                                   VF_init()
-*                                   VF_exit()
-*
-* $Date: 2002/10/02 15:35:21 $ $Author: hfrieden $
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-uchar code[] = {
-    0xC3,                   /* ret          */
-    };
-
-int main(void)
-{
-    void    *vfBuffer;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    if (!VF_available()) {
-	printf("Virtual Linear Framebuffer not available.\n");
-	exit(1);
-	}
-
-    vfBuffer = VF_init(0xA0000,64,sizeof(code),code);
-    if (!vfBuffer) {
-	printf("Failure to initialise Virtual Linear Framebuffer!\n");
-	exit(1);
-	}
-    VF_exit();
-    printf("Virtual Linear Framebuffer set up successfully!\n");
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/video.c b/board/MAI/bios_emulator/scitech/src/pm/tests/video.c
deleted file mode 100644
index 92adcddd49..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/video.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  any
-*
-* Description:  Test program to check the ability to generate real mode
-*               interrupts and to be able to obtain direct access to the
-*               video memory from protected mode. Compile and link with
-*               the appropriate command line for your DOS extender.
-*
-*               Functions tested:   PM_getBIOSSelector()
-*                                   PM_mapPhysicalAddr()
-*                                   PM_int86()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-uchar   *bios;          /* Pointer to BIOS data area        */
-uchar   *videoPtr;      /* Pointer to VGA framebuffer       */
-void    *stateBuf;      /* Console state save buffer        */
-
-/* Routine to return the current video mode number */
-
-int getVideoMode(void)
-{
-    return PM_getByte(bios+0x49);
-}
-
-/* Routine to set a specified video mode */
-
-void setVideoMode(int mode)
-{
-    RMREGS r;
-
-    r.x.ax = mode;
-    PM_int86(0x10, &r, &r);
-}
-
-/* Routine to clear a rectangular region on the display by calling the
- * video BIOS.
- */
-
-void clearScreen(int startx, int starty, int endx, int endy, unsigned char attr)
-{
-    RMREGS r;
-
-    r.x.ax = 0x0600;
-    r.h.bh = attr;
-    r.h.cl = startx;
-    r.h.ch = starty;
-    r.h.dl = endx;
-    r.h.dh = endy;
-    PM_int86(0x10, &r, &r);
-}
-
-/* Routine to fill a rectangular region on the display using direct
- * video writes.
- */
-
-#define SCREEN(x,y) (videoPtr + ((y) * 160) + ((x) << 1))
-
-void fill(int startx, int starty, int endx, int endy, unsigned char c,
-    unsigned char attr)
-{
-    unsigned char   *v;
-    int             x,y;
-
-    for (y = starty; y <= endy; y++) {
-	v = SCREEN(startx,y);
-	for (x = startx; x <= endx; x++) {
-	    *v++ = c;
-	    *v++ = attr;
-	    }
-	}
-}
-
-/* Routine to display a single character using direct video writes */
-
-void writeChar(int x, int y, unsigned char c, unsigned char attr)
-{
-    unsigned char *v = SCREEN(x,y);
-    *v++ = c;
-    *v = attr;
-}
-
-/* Routine to draw a border around a rectangular area using direct video
- * writes.
- */
-
-static unsigned char border_chars[] = {
-    186, 205, 201, 187, 200, 188        /* double box chars */
-    };
-
-void border(int startx, int starty, int endx, int endy, unsigned char attr)
-{
-    unsigned char   *v;
-    unsigned char   *b;
-    int             i;
-
-    b = border_chars;
-
-    for (i = starty+1; i < endy; i++) {
-	writeChar(startx, i, *b, attr);
-	writeChar(endx, i, *b, attr);
-	}
-    b++;
-    for (i = startx+1, v = SCREEN(startx+1, starty); i < endx; i++) {
-	*v++ = *b;
-	*v++ = attr;
-	}
-    for (i = startx+1, v = SCREEN(startx+1, endy); i < endx; i++) {
-	*v++ = *b;
-	*v++ = attr;
-	}
-    b++;
-    writeChar(startx, starty, *b++, attr);
-    writeChar(endx, starty, *b++, attr);
-    writeChar(startx, endy, *b++, attr);
-    writeChar(endx, endy, *b++, attr);
-}
-
-int main(void)
-{
-    int     orgMode;
-    PM_HWND hwndConsole;
-
-    printf("Program running in ");
-    switch (PM_getModeType()) {
-	case PM_realMode:
-	    printf("real mode.\n\n");
-	    break;
-	case PM_286:
-	    printf("16 bit protected mode.\n\n");
-	    break;
-	case PM_386:
-	    printf("32 bit protected mode.\n\n");
-	    break;
-	}
-
-    hwndConsole = PM_openConsole(0,0,0,0,0,true);
-    printf("Hit any key to start 80x25 text mode and perform some direct video output.\n");
-    PM_getch();
-
-    /* Allocate a buffer to save console state and save the state */
-    if ((stateBuf = PM_malloc(PM_getConsoleStateSize())) == NULL) {
-	printf("Unable to allocate console state buffer!\n");
-	exit(1);
-	}
-    PM_saveConsoleState(stateBuf,0);
-    bios = PM_getBIOSPointer();
-    orgMode = getVideoMode();
-    setVideoMode(0x3);
-    if ((videoPtr = PM_mapPhysicalAddr(0xB8000,0xFFFF,true)) == NULL) {
-	printf("Unable to obtain pointer to framebuffer!\n");
-	exit(1);
-	}
-
-    /* Draw some text on the screen */
-    fill(0, 0, 79, 24, 176, 0x1E);
-    border(0, 0, 79, 24, 0x1F);
-    PM_getch();
-    clearScreen(0, 0, 79, 24, 0x7);
-
-    /* Restore the console state on exit */
-    PM_restoreConsoleState(stateBuf,0);
-    PM_free(stateBuf);
-    PM_closeConsole(hwndConsole);
-
-    /* Display useful status information */
-    printf("\n");
-    printf("Original Video Mode = %02X\n", orgMode);
-    printf("BIOS Pointer = %08X\n", (int)bios);
-    printf("Video Memory = %08X\n", (int)videoPtr);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c
deleted file mode 100644
index 3460b72456..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2 VDD
-*
-* Description:  VDD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VDD's
-****************************************************************************/
-#define SetMaxThreadPriority()      0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VDD's
-****************************************************************************/
-#define RestoreThreadPriority(i)    (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    freq->low  = 100000;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                              \
-{                                                  \
-    ULONG   count;                                 \
-    count = VDHQuerySysValue(0, VDHGSV_MSECSBOOT); \
-    (t)->low  = count * 100;                       \
-    (t)->high = 0;                                 \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c
deleted file mode 100644
index 93742de914..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2 VDD
-*
-* Description:  C library compatible I/O functions for use within a VDD.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "vddfile.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-#define EOF -1
-
-/* NB: none of the file VDHs are available during the DOS session          */
-/* initialzation context!                                                  */
-
-/* Macros for Open/Close APIs to allow using this module in both VDDs and  */
-/* normal OS/2 applications. Unfortunately VDHRead/Write/Seek don't map to */
-/* their Dos* counterparts so cleanly.                                     */
-#ifdef __OS2_VDD__
-#define _OS2Open    VDHOpen
-#define _OS2Close   VDHClose
-#else
-#define _OS2Open    DosOpen
-#define _OS2Close   DosClose
-#endif
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
-    const char *filename,
-    const char *mode)
-{
-    FILE    *f = PM_malloc(sizeof(FILE));
-    long    oldpos;
-    ULONG   rc, ulAction;
-    ULONG   omode, oflags;
-
-    if (f != NULL) {
-	f->offset = 0;
-	f->text = (mode[1] == 't' || mode[2] == 't');
-	f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
-	f->unputc = EOF;
-	f->endp = f->buf + sizeof(f->buf);
-	f->curp = f->startp = f->buf;
-
-	if (mode[0] == 'r') {
-	    #ifdef __OS2_VDD__
-	    omode  = VDHOPEN_ACCESS_READONLY | VDHOPEN_SHARE_DENYNONE;
-	    oflags = VDHOPEN_ACTION_OPEN_IF_EXISTS | VDHOPEN_ACTION_FAIL_IF_NEW;
-	    #else
-	    omode  = OPEN_ACCESS_READONLY | OPEN_SHARE_DENYNONE;
-	    oflags = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_FAIL_IF_NEW;
-	    #endif
-	    }
-	else if (mode[0] == 'w') {
-	    #ifdef __OS2_VDD__
-	    omode  = VDHOPEN_ACCESS_WRITEONLY | VDHOPEN_SHARE_DENYWRITE;
-	    oflags = VDHOPEN_ACTION_REPLACE_IF_EXISTS | VDHOPEN_ACTION_CREATE_IF_NEW;
-	    #else
-	    omode  = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYWRITE;
-	    oflags = OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
-	    #endif
-	    }
-	else {
-	    #ifdef __OS2_VDD__
-	    omode  = VDHOPEN_ACCESS_READWRITE | VDHOPEN_SHARE_DENYWRITE;
-	    oflags = VDHOPEN_ACTION_OPEN_IF_EXISTS | VDHOPEN_ACTION_CREATE_IF_NEW;
-	    #else
-	    omode  = OPEN_ACCESS_READWRITE | OPEN_SHARE_DENYWRITE;
-	    oflags = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
-	    #endif
-	    }
-	rc = _OS2Open((PSZ)filename, (PHFILE)&f->handle, &ulAction, 0, VDHOPEN_FILE_NORMAL, oflags, omode, NULL);
-	if (rc != 0) {
-	    PM_free(f);
-	    return NULL;
-	    }
-
-	#ifdef __OS2_VDD__
-	f->filesize = VDHSeek((HFILE)f->handle, 0, VDHSK_END_OF_FILE);
-	#else
-	rc = DosSetFilePtr((HFILE)f->handle, 0, FILE_END, &f->filesize);
-	#endif
-
-	if (mode[0] == 'a')
-	    fseek(f,0,2);
-    }
-    return f;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fread function. Note that unlike Windows VxDs,
-OS/2 VDDs are not limited to 64K reads or writes.
-****************************************************************************/
-size_t fread(
-    void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    char    *buf = ptr;
-    int     bytes,readbytes,totalbytes = 0;
-
-    /* First copy any data already read into our buffer */
-    if ((bytes = (f->curp - f->startp)) > 0) {
-	memcpy(buf,f->curp,bytes);
-	f->startp = f->curp = f->buf;
-	buf += bytes;
-	totalbytes += bytes;
-	bytes = (size * n) - bytes;
-	}
-    else
-	bytes = size * n;
-    if (bytes) {
-	#ifdef __OS2_VDD__
-	readbytes = VDHRead((HFILE)f->handle, buf, bytes);
-	#else
-	DosRead((HFILE)f->handle, buf, bytes, &readbytes);
-	#endif
-	totalbytes += readbytes;
-	f->offset += readbytes;
-	}
-    return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fwrite function.
-****************************************************************************/
-size_t fwrite(
-    void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    char        *buf = ptr;
-    int         bytes,writtenbytes,totalbytes = 0;
-
-    /* Flush anything already in the buffer */
-    if (!f->writemode)
-	return 0;
-    fflush(f);
-    bytes = size * n;
-    #ifdef __OS2_VDD__
-    writtenbytes = VDHWrite((HFILE)f->handle, buf, bytes);
-    #else
-    DosWrite((HFILE)f->handle, buf, bytes, &writtenbytes);
-    #endif
-    totalbytes += writtenbytes;
-    f->offset += writtenbytes;
-    if (f->offset > f->filesize)
-	f->filesize = f->offset;
-    return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
-    FILE *f)
-{
-    ULONG     bytes;
-
-    /* First copy any data already written into our buffer */
-    if (f->writemode && (bytes = (f->curp - f->startp)) > 0) {
-	#ifdef __OS2_VDD__
-	bytes = VDHWrite((HFILE)f->handle, f->startp, bytes);
-	#else
-	DosWrite((HFILE)f->handle, f->startp, bytes, &bytes);
-	#endif
-	f->offset += bytes;
-	if (f->offset > f->filesize)
-	    f->filesize = f->offset;
-	f->startp = f->curp = f->buf;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
-    FILE *f,
-    long int offset,
-    int whence)
-{
-    fflush(f);
-
-    if (whence == 0)
-	f->offset = offset;
-    else if (whence == 1)
-	f->offset += offset;
-    else if (whence == 2)
-	f->offset = f->filesize + offset;
-
-    #ifdef __OS2_VDD__
-    VDHSeek((HFILE)f->handle, f->offset, VDHSK_ABSOLUTE);
-    #else
-    DosSetFilePtr((HFILE)f->handle, f->offset, FILE_BEGIN, NULL);
-    #endif
-
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
-    FILE *f)
-{
-    long    offset;
-
-    offset = (f->curp - f->startp);
-    offset += f->offset;
-    return offset;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
-    FILE *f)
-{
-    return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-Read a single character from the input file buffer, including translation
-of the character in text transation modes.
-****************************************************************************/
-static int __getc(
-    FILE *f)
-{
-    int c;
-
-    if (f->unputc != EOF) {
-	c = f->unputc;
-	f->unputc = EOF;
-	}
-    else {
-	if (f->startp == f->curp) {
-	    int bytes = fread(f->buf,1,sizeof(f->buf),f);
-	    if (bytes == 0)
-		return EOF;
-	    f->curp = f->startp + bytes;
-	    }
-	c = *f->startp++;
-	if (f->text && c == '\r') {
-	    int nc = __getc(f);
-	    if (nc != '\n')
-		f->unputc = nc;
-	    }
-	}
-    return c;
-}
-
-/****************************************************************************
-REMARKS:
-Write a single character from to input buffer, including translation of the
-character in text transation modes.
-****************************************************************************/
-static int __putc(int c,FILE *f)
-{
-    int count = 1;
-    if (f->text && c == '\n') {
-	__putc('\r',f);
-	count = 2;
-	}
-    if (f->curp == f->endp)
-	fflush(f);
-    *f->curp++ = c;
-    return count;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
-    char *s,
-    int n,
-    FILE *f)
-{
-    int c = 0;
-    char *cs;
-
-    cs = s;
-    while (--n > 0 && (c = __getc(f)) != EOF) {
-	*cs++ = c;
-	if (c == '\n')
-	    break;
-	}
-    if (c == EOF && cs == s)
-	return NULL;
-    *cs = '\0';
-    return s;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
-    const char *s,
-    FILE *f)
-{
-    int r = 0;
-    int c;
-
-    while ((c = *s++) != 0)
-	r = __putc(c, f);
-    return r;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
-    FILE *f)
-{
-    fflush(f);
-    _OS2Close((HFILE)f->handle);
-    PM_free(f);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h
deleted file mode 100644
index 03286bdc2e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2 VDD
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c
deleted file mode 100644
index d930e7f09e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c
+++ /dev/null
@@ -1,975 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2 VDD
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-
-#define TRACE(a)
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED           100
-#define MAX_MEMORY_MAPPINGS         100
-
-/* TODO: I think the global and linear members will be the same, but not sure yet. */
-typedef struct {
-    void    *linear;
-    ulong   global;
-    ulong   length;
-    int     npages;
-    } memshared;
-
-typedef struct {
-    ulong   physical;
-    ulong   linear;
-    ulong   length;
-    int     npages;
-    ibool   isCached;
-    } mmapping;
-
-static int          numMappings = 0;
-static memshared    shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping     maps[MAX_MEMORY_MAPPINGS];
-ibool               _PM_haveBIOS = TRUE;
-char                _PM_cntPath[PM_MAX_PATH] = "";     /* there just isn't any */
-uchar               *_PM_rmBufAddr = NULL;
-ushort _VARAPI      PM_savedDS = 0;   /* why can't I use the underscore prefix? */
-
-HVDHSEM             hevFarCallRet = NULL;
-HVDHSEM             hevIRet       = NULL;
-HHOOK               hhookUserReturnHook = NULL;
-HHOOK               hhookUserIRetHook   = NULL;
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-ulong   PMAPI _PM_getPDB(void);
-uchar   PMAPI _PM_readCMOS(int index);
-void    PMAPI _PM_writeCMOS(int index,uchar value);
-
-VOID HOOKENTRY UserReturnHook(PVOID pRefData, PCRF pcrf);
-VOID HOOKENTRY UserIRetHook(PVOID pRefData, PCRF pcrf);
-
-void PMAPI PM_init(void)
-{
-    MTRR_init();
-
-    /* Initialize VDD-specific data */
-    /* Note: PM_init must be (obviously) called in VDM task context! */
-    VDHCreateSem(&hevFarCallRet, VDH_EVENTSEM);
-    VDHCreateSem(&hevIRet, VDH_EVENTSEM);
-    hhookUserReturnHook = VDHAllocHook(VDH_RETURN_HOOK, (PFNARM)UserReturnHook, 0);
-    hhookUserIRetHook   = VDHAllocHook(VDH_RETURN_HOOK, (PFNARM)UserIRetHook, 0);
-
-    if ((hevIRet == NULL) || (hevFarCallRet == NULL) ||
-	(hhookUserReturnHook == NULL) || (hhookUserIRetHook == NULL)) {
-	/* something failed, we can't go on */
-	/* TODO: take some action here! */
-	}
-}
-
-/* Do some cleaning up */
-void PMAPI PM_exit(void)
-{
-    /* Note: Hooks allocated during or after VDM creation are deallocated automatically */
-    if (hevIRet != NULL)
-	VDHDestroySem(hevIRet);
-
-    if (hevFarCallRet != NULL)
-	VDHDestroySem(hevFarCallRet);
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return _PM_haveBIOS; }
-
-long PMAPI PM_getOSType(void)
-{ return /*_OS_OS2VDD*/ _OS_OS2; }  /*FIX!! */
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-/*    Fatal_Error_Handler(msg,0);  TODO: implement somehow! */
-}
-
-/****************************************************************************
-PARAMETERS:
-len     - Place to store the length of the buffer
-rseg    - Place to store the real mode segment of the buffer
-roff    - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    if (_PM_rmBufAddr) {
-	*len = 0; /*VESA_BUF_SIZE; */
-	*rseg = (ulong)(_PM_rmBufAddr) >> 4;
-	*roff = (ulong)(_PM_rmBufAddr) & 0xF;
-	return _PM_rmBufAddr;
-	}
-    return NULL;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
-    /* Unused in VDDs */
-    return 0;
-}
-
-char * PMAPI PM_getCurrentPath(char *path,int maxLen)
-{
-    strncpy(path, _PM_cntPath, maxLen);
-    path[maxLen - 1] = 0;
-    return path;
-}
-
-char PMAPI PM_getBootDrive(void)
-{
-    ulong   boot = 3;
-    boot = VDHQuerySysValue(0, VDHGSV_BOOTDRV);
-    return (char)('a' + boot - 1);
-}
-
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    static char path[CCHMAXPATH];
-    strcpy(path,"x:\\");
-    path[0] = PM_getBootDrive();
-    return path;
-}
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-	static char path[CCHMAXPATH];
-	strcpy(path,"x:\\os2\\drivers");
-	path[0] = PM_getBootDrive();
-	PM_backslash(path);
-	strcat(path,"nucleus");
-	return path;
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return PM_getMachineName(); }
-
-const char * PMAPI PM_getMachineName(void)
-{
-    return "Unknown";
-}
-
-int PMAPI PM_kbhit(void)
-{ return 1; }
-
-int PMAPI PM_getch(void)
-{ return 0; }
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
-    /* Unused in VDDs */
-    return NULL;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* Unused in VDDs */
-    return 1;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
-    /* Unused in VDDs */
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
-    /* Unused in VDDs */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
-    /* Unused in VDDs */
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
-    /* Unused in VDDs */
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x50,x);
-    PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x4A,width);
-    PM_setByte(_biosPtr+0x84,height-1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For OS/2 VDD we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(long size)
-{
-    ULONG       nPages = (size + 0xFFF) >> 12;
-    int         i;
-
-    /* First find a free slot in our shared memory table */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].linear == 0)
-	    break;
-	}
-    if (i < MAX_MEMORY_SHARED) {
-	shared[i].linear = VDHAllocPages(NULL, nPages, VDHAP_SYSTEM | VDHAP_FIXED);
-	shared[i].npages = nPages;
-	shared[i].global = (ULONG)shared[i].linear;
-	return (void*)shared[i].global;
-	}
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(void *p)
-{
-    int i;
-
-    /* Find a shared memory block in our table and free it */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].global == (ulong)p) {
-	    VDHFreePages(shared[i].linear);
-	    shared[i].linear = 0;
-	    break;
-	    }
-	}
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    /* TODO: Figure out how to do this */
-    return false;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return (void*)0x400; }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-/****************************************************************************
-PARAMETERS:
-base        - Physical base address of the memory to maps in
-limit       - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-ulong MapPhysicalToLinear(
-    ulong base,
-    ulong limit,
-    int *npages)
-{
-    ulong   linear,length = limit+1;
-    int     i,ppage,flags;
-    return linear + (base & 0xFFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-base        - Physical base address of the memory to map in
-limit       - Limit of physical memory to region to map in
-isCached    - True if the memory should be cached, false if not
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-This function maps physical memory to linear memory, which can then be used
-to create a selector or used directly from 32-bit protected mode programs.
-This is better than DPMI 0x800, since it allows you to maps physical
-memory below 1Mb, which gets this memory out of the way of the Windows VxD's
-sticky paws.
-
-NOTE:   If the memory is not expected to be cached, this function will
-	directly re-program the PCD (Page Cache Disable) bit in the
-	page tables. There does not appear to be a mechanism in the VMM
-	to control this bit via the regular interface.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    ulong   linear,length = limit+1;
-    int     i,npages;
-    ulong   PDB,*pPDB;
-
-    /* Search table of existing mappings to see if we have already mapped
-     * a region of memory that will serve this purpose.
-     */
-    for (i = 0; i < numMappings; i++) {
-	if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached)
-	    return (void*)maps[i].linear;
-	}
-    if (numMappings == MAX_MEMORY_MAPPINGS)
-	return NULL;
-
-    /* We did not find any previously mapped memory region, so map it in.
-     * Note that we do not use MapPhysToLinear, since this function appears
-     * to have problems mapping memory in the 1Mb physical address space.
-     * Hence we use PageReserve and PageCommitPhys.
-     */
-    if ((linear = MapPhysicalToLinear(base,limit,&npages)) == 0)
-	return NULL;
-    maps[numMappings].physical = base;
-    maps[numMappings].length = length;
-    maps[numMappings].linear = linear;
-    maps[numMappings].npages = npages;
-    maps[numMappings].isCached = isCached;
-    numMappings++;
-
-    return (void*)linear;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-    /* We never free the mappings */
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* We never sleep in a VDD */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
-	/* TODO: This function should find the physical address of a linear */
-	/*               address. */
-	return 0xFFFFFFFFUL;
-}
-
-void PMAPI _PM_freeMemoryMappings(void)
-{
-    int i;
-/*    for (i = 0; i < numMappings; i++) */
-/*        PageFree(maps[i].linear,PR_STATIC); */
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{ return (void*)MK_PHYS(r_seg,r_off); }
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{ return NULL; }
-
-void PMAPI PM_freeRealSeg(void *mem)
-{ }
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
-    /* Unsed in VDDs */
-}
-
-/****************************************************************************
-REMARKS:
-Load the V86 registers in the client state, and save the original state
-before loading the registers.
-****************************************************************************/
-static void LoadV86Registers(
-    PCRF saveRegs,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    PCRF            pcrf;     /* current client register frame */
-
-    /* get pointer to registers */
-    pcrf = (PCRF)VDHQuerySysValue(CURRENT_VDM, VDHLSV_PCRF);
-
-    /* Note: We could do VDHPushRegs instead but this should be safer as it */
-    /* doesn't rely on the VDM session having enough free stack space. */
-    *saveRegs = *pcrf;        /* save all registers */
-
-    pcrf->crf_eax = in->e.eax;    /* load new values */
-    pcrf->crf_ebx = in->e.ebx;
-    pcrf->crf_ecx = in->e.ecx;
-    pcrf->crf_edx = in->e.edx;
-    pcrf->crf_esi = in->e.esi;
-    pcrf->crf_edi = in->e.edi;
-    pcrf->crf_es  = sregs->es;
-    pcrf->crf_ds  = sregs->ds;
-
-}
-
-/****************************************************************************
-REMARKS:
-Read the V86 registers from the client state and restore the original state.
-****************************************************************************/
-static void ReadV86Registers(
-    PCRF saveRegs,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    PCRF            pcrf;     /* current client register frame */
-
-    /* get pointer to registers */
-    pcrf = (PCRF)VDHQuerySysValue(CURRENT_VDM, VDHLSV_PCRF);
-
-    /* read new register values */
-    out->e.eax = pcrf->crf_eax;
-    out->e.ebx = pcrf->crf_ebx;
-    out->e.ecx = pcrf->crf_ecx;
-    out->e.edx = pcrf->crf_edx;
-    out->e.esi = pcrf->crf_esi;
-    out->e.edi = pcrf->crf_edi;
-    sregs->es  = pcrf->crf_es;
-    sregs->ds  = pcrf->crf_ds;
-
-    /* restore original client registers */
-    *pcrf = *saveRegs;
-}
-
-/****************************************************************************
-REMARKS: Used for far calls into V86 code
-****************************************************************************/
-VOID HOOKENTRY UserReturnHook(
-  PVOID pRefData,
-  PCRF pcrf )
-{
-    VDHPostEventSem(hevFarCallRet);
-}
-
-/****************************************************************************
-REMARKS: Used for calling BIOS interrupts
-****************************************************************************/
-VOID HOOKENTRY UserIRetHook(
-  PVOID pRefData,
-  PCRF pcrf )
-{
-    VDHPostEventSem(hevIRet);
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-Must be called from within a DOS session context!
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *regs,
-    RMSREGS *sregs)
-{
-    CRF   saveRegs;
-    FPFN  fnAddress;
-    ULONG rc;
-
-    TRACE("SDDHELP: Entering PM_callRealMode()\n");
-    LoadV86Registers(SSToDS(&saveRegs),regs,sregs);
-
-    /* set up return hook for call */
-    rc = VDHArmReturnHook(hhookUserReturnHook, VDHARH_CSEIP_HOOK);
-
-    VDHResetEventSem(hevFarCallRet);
-
-    /* the address is a 16:32 pointer */
-    OFFSETOF32(fnAddress)  = off;
-    SEGMENTOF32(fnAddress) = seg;
-    rc = VDHPushFarCall(fnAddress);
-    VDHYield(0);
-
-    /* wait until the V86 call returns - our return hook posts the semaphore */
-    rc = VDHWaitEventSem(hevFarCallRet, SEM_INDEFINITE_WAIT);
-
-    ReadV86Registers(SSToDS(&saveRegs),regs,sregs);
-    TRACE("SDDHELP: Exiting PM_callRealMode()\n");
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-Must be called from within a DOS session context!
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    RMSREGS    sregs = {0};
-    CRF        saveRegs;
-    ushort     oldDisable;
-    ULONG      rc;
-
-    memset(SSToDS(&sregs), 0, sizeof(sregs));
-
-
-    LoadV86Registers(SSToDS(&saveRegs), in, SSToDS(&sregs));
-
-    VDHResetEventSem(hevIRet);
-    rc = VDHPushInt(intno);
-
-    /* set up return hook for interrupt */
-    rc = VDHArmReturnHook(hhookUserIRetHook, VDHARH_NORMAL_IRET);
-
-    VDHYield(0);
-
-    /* wait until the V86 IRETs - our return hook posts the semaphore */
-    rc = VDHWaitEventSem(hevIRet, 5000); /*SEM_INDEFINITE_WAIT); */
-
-    ReadV86Registers(SSToDS(&saveRegs), out, SSToDS(&sregs));
-
-
-    TRACE("SDDHELP: Exiting PM_int86()\n");
-    return out->x.ax;
-
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    CRF             saveRegs;
-    ushort          oldDisable;
-    ULONG       rc;
-
-    LoadV86Registers(SSToDS(&saveRegs), in, sregs);
-
-    VDHResetEventSem(hevIRet);
-    rc = VDHPushInt(intno);
-
-    /* set up return hook for interrupt */
-    rc = VDHArmReturnHook(hhookUserIRetHook, VDHARH_NORMAL_IRET);
-
-    VDHYield(0);
-
-    /* wait until the V86 IRETs - our return hook posts the semaphore */
-    rc = VDHWaitEventSem(hevIRet, 5000); /*SEM_INDEFINITE_WAIT); */
-
-    ReadV86Registers(SSToDS(&saveRegs), out, sregs);
-
-
-    TRACE("SDDHELP: Exiting PM_int86x()\n");
-    return out->x.ax;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{ *physical = *total = 0; }
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    ULONG       flags = VDHAP_SYSTEM;
-    ULONG       nPages = (size + 0xFFF) >> 12;
-
-    flags |= (physAddr != NULL) ? VDHAP_PHYSICAL : VDHAP_FIXED;
-
-    return VDHAllocPages(physAddr, nPages, VDHAP_SYSTEM | VDHAP_PHYSICAL);
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    if (p)
-	VDHFreePages((PVOID)p);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    ULONG  lockHandle;
-
-    /* TODO: the lock handle is essential for the unlock operation!! */
-    lockHandle = VDHLockMem(p, len, 0, (PVOID)VDHLM_NO_ADDR, NULL);
-
-    if (lockHandle != NULL)
-       return 0;
-    else
-       return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    /* TODO: implement - use a table of lock handles? */
-    /* VDHUnlockPages(lockHandle); */
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    return PM_unlockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    (void)szDLLName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    /* TODO: This function should start a directory enumeration search */
-    /*       given the filename (with wildcards). The data should be */
-    /*       converted and returned in the findData standard form. */
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    /* TODO: This function should find the next file in directory enumeration */
-    /*       search given the search criteria defined in the call to */
-    /*       PM_findFirstFile. The data should be converted and returned */
-    /*       in the findData standard form. */
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    /* TODO: This function should close the find process. This may do */
-    /*       nothing for some OS'es. */
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    /* Not applicable in a VDD */
-    (void)drive;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    /* Not applicable in a VDD */
-    (void)drive;
-    (void)dir;
-    (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-    return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    (void)attrib;
-    PM_fatalError("PM_setFileAttr not implemented!");
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    PM_fatalError("PM_getFileAttr not implemented!");
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    PM_fatalError("PM_mkdir not implemented!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    PM_fatalError("PM_rmdir not implemented!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_getFileTime not implemented!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this ? */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_setFileTime not implemented!");
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c
deleted file mode 100644
index 21639281a7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-*                                       SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:             ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-	return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-	return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c
deleted file mode 100644
index 631f6558ee..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit OS/2 VDD
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong    frequency = 1193180;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-#define __ZTimerInit()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm)     VTD_Get_Real_Time(&tm->start.high,&tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    lap,count;
-    VTD_Get_Real_Time(&lap.high,&lap.low);
-    _CPU_diffTime64(&tm->start,&lap,&count);
-    return _CPU_calcMicroSec(&count,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)    VTD_Get_Real_Time(&tm->end.high,&tm->end.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger tmCount;
-    _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    return VDHQuerySysValue(0, VDHGSV_MSECSBOOT);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm
deleted file mode 100644
index 64a7cecb2d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm
+++ /dev/null
@@ -1,299 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows VxD
-;*
-;* Description: Low level assembly support for the PM library specific to
-;*              Windows VxDs.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pm                     ; Set up memory model
-
-begdataseg  _pm
-
-    cextern _PM_savedDS,USHORT
-
-enddataseg  _pm
-
-P586
-
-begcodeseg  _pm                 ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstart  PM_segread
-
-        ARG     sregs:DPTR
-
-        enter_c
-
-        mov     ax,es
-        _les    _si,[sregs]
-        mov     [_ES _si],ax
-        mov     [_ES _si+2],cs
-        mov     [_ES _si+4],ss
-        mov     [_ES _si+6],ds
-        mov     [_ES _si+8],fs
-        mov     [_ES _si+10],gs
-
-        leave_c
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstart  PM_int386x
-
-; Not used for VxDs
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstart  PM_saveDS
-
-        mov     [_PM_savedDS],ds    ; Store away in data segment
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstart  PM_loadDS
-
-        mov     ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankA
-
-; Not used for VxDs
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart      PM_setBankAB
-
-; Not used for VxDs
-
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart      PM_setCRTStart
-
-; Not used for VxDs
-
-        ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef   USE_NASM
-%macro  DELAY 0
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-%endmacro
-%macro  IODELAYN 1
-%rep    %1
-        DELAY
-%endrep
-%endmacro
-else
-macro   DELAY
-        jmp     short $+2
-        jmp     short $+2
-        jmp     short $+2
-endm
-macro   IODELAYN    N
-    rept    N
-        DELAY
-    endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_readCMOS
-
-        ARG     index:UINT
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        in      al,71h
-        mov     ah,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        mov     al,ah               ; Return value in AL
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart  _PM_writeCMOS
-
-        ARG     index:UINT, value:UCHAR
-
-        push    _bp
-        mov     _bp,_sp
-        pushfd
-        mov     al,[BYTE index]
-        or      al,80h              ; Add disable NMI flag
-        cli
-        out     70h,al
-        IODELAYN 5
-        mov     al,[value]
-        out     71h,al
-        xor     al,al
-        IODELAYN 5
-        out     70h,al              ; Re-enable NMI
-        popfd
-        pop     _bp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; double _ftol(double f)
-;----------------------------------------------------------------------------
-; Calls to __ftol are generated by the Borland C++ compiler for code
-; that needs to convert a floating point type to an integral type.
-;
-; Input: floating point number on the top of the '87.
-;
-; Output: a (signed or unsigned) long in EAX
-; All other registers preserved.
-;-----------------------------------------------------------------------
-cprocstart  _ftol
-
-        LOCAL   temp1:WORD, temp2:QWORD = LocalSize
-
-        push    ebp
-        mov     ebp,esp
-        sub     esp,LocalSize
-
-        fstcw   [temp1]                 ; save the control word
-        fwait
-        mov     al,[BYTE temp1+1]
-        or      [BYTE temp1+1],0Ch      ; set rounding control to chop
-        fldcw   [temp1]
-        fistp   [temp2]                 ; convert to 64-bit integer
-        mov     [BYTE temp1+1],al
-        fldcw   [temp1]                 ; restore the control word
-        mov     eax,[DWORD temp2]       ; return LS 32 bits
-        mov     edx,[DWORD temp2+4]     ;        MS 32 bits
-
-        mov     esp,ebp
-        pop     ebp
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart  _PM_getPDB
-
-        mov     eax,cr3
-        and     eax,0FFFFF000h
-        ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart  PM_flushTLB
-
-        wbinvd                  ; Flush the CPU cache
-        mov     eax,cr3
-        mov     cr3,eax         ; Flush the TLB
-        ret
-
-cprocend
-
-endcodeseg  _pm
-
-        END                     ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c
deleted file mode 100644
index 3c7eaaeaac..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  VxD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define SetMaxThreadPriority()      0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define RestoreThreadPriority(i)    (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    freq->low = 1193180;
-    freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                           \
-{                                               \
-    CPU_largeInteger count;                     \
-    VTD_Get_Real_Time(&count.high,&count.low);  \
-    (t)->low = count.low;                       \
-    (t)->high = count.high;                     \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c
deleted file mode 100644
index 3c6ce99208..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  C library compatible I/O functions for use within a VxD.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "vxdfile.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-#define EOF -1
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
-    const char *filename,
-    const char *mode)
-{
-    FILE    *f = PM_malloc(sizeof(FILE));
-    long    oldpos;
-
-    if (f) {
-	f->offset = 0;
-	f->text = (mode[1] == 't' || mode[2] == 't');
-	f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
-	if (initComplete) {
-	    WORD    omode,error;
-	    BYTE    action;
-
-	    if (mode[0] == 'r') {
-		omode = OPEN_ACCESS_READONLY | OPEN_SHARE_COMPATIBLE;
-		action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_FAIL;
-		}
-	    else if (mode[0] == 'w') {
-		omode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_COMPATIBLE;
-		action = ACTION_IFEXISTS_TRUNCATE | ACTION_IFNOTEXISTS_CREATE;
-		}
-	    else {
-		omode = OPEN_ACCESS_READWRITE | OPEN_SHARE_COMPATIBLE;
-		action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_CREATE;
-		}
-	    f->handle = (int)R0_OpenCreateFile(false,(char*)filename,omode,ATTR_NORMAL,action,0,&error,&action);
-	    if (f->handle == 0) {
-		PM_free(f);
-		return NULL;
-		}
-	    f->filesize = R0_GetFileSize((HANDLE)f->handle,&error);
-	    if (mode[0] == 'a')
-		fseek(f,0,2);
-	    }
-	else {
-	    int oflag,pmode;
-
-	    if (mode[0] == 'r') {
-		pmode = _S_IREAD;
-		oflag = _O_RDONLY;
-		}
-	    else if (mode[0] == 'w') {
-		pmode = _S_IWRITE;
-		oflag = _O_WRONLY | _O_CREAT | _O_TRUNC;
-		}
-	    else {
-		pmode = _S_IWRITE;
-		oflag = _O_RDWR | _O_CREAT | _O_APPEND;
-		}
-	    if (f->text)
-		oflag |= _O_TEXT;
-	    else
-		oflag |= _O_BINARY;
-	    if ((f->handle = i_open(filename,oflag,pmode)) == -1) {
-		PM_free(f);
-		return NULL;
-		}
-	    oldpos = i_lseek(f->handle,0,1);
-	    f->filesize = i_lseek(f->handle,0,2);
-	    i_lseek(f->handle,oldpos,0);
-	    }
-	}
-    return f;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fread function. Note that the VxD file I/O
-functions are layered on DOS, so can only read up to 64K at a time. Since
-we are expected to handle much larger chunks than this, we handle larger
-blocks automatically in here.
-****************************************************************************/
-size_t fread(
-    void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    char    *buf = ptr;
-    WORD    error;
-    int     bytes = size * n;
-    int     readbytes,totalbytes = 0;
-
-    while (bytes > 0x10000) {
-	if (initComplete) {
-	    readbytes  = R0_ReadFile(false,(HANDLE)f->handle,buf,0x8000,f->offset,&error);
-	    readbytes += R0_ReadFile(false,(HANDLE)f->handle,buf+0x8000,0x8000,f->offset+0x8000,&error);
-	    }
-	else {
-	    readbytes  = i_read(f->handle,buf,0x8000);
-	    readbytes += i_read(f->handle,buf+0x8000,0x8000);
-	    }
-	totalbytes += readbytes;
-	f->offset += readbytes;
-	buf += 0x10000;
-	bytes -= 0x10000;
-	}
-    if (bytes) {
-	if (initComplete)
-	    readbytes = R0_ReadFile(false,(HANDLE)f->handle,buf,bytes,f->offset,&error);
-	else
-	    readbytes = i_read(f->handle,buf,bytes);
-	totalbytes += readbytes;
-	f->offset += readbytes;
-	}
-    return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fwrite function. Note that the VxD file I/O
-functions are layered on DOS, so can only read up to 64K at a time. Since
-we are expected to handle much larger chunks than this, we handle larger
-blocks automatically in here.
-****************************************************************************/
-size_t fwrite(
-    const void *ptr,
-    size_t size,
-    size_t n,
-    FILE *f)
-{
-    const char  *buf = ptr;
-    WORD        error;
-    int         bytes = size * n;
-    int         writtenbytes,totalbytes = 0;
-
-    if (!f->writemode)
-	return 0;
-    while (bytes > 0x10000) {
-	if (initComplete) {
-	    writtenbytes  = R0_WriteFile(false,(HANDLE)f->handle,buf,0x8000,f->offset,&error);
-	    writtenbytes += R0_WriteFile(false,(HANDLE)f->handle,buf+0x8000,0x8000,f->offset+0x8000,&error);
-	    }
-	else {
-	    writtenbytes  = i_write(f->handle,buf,0x8000);
-	    writtenbytes += i_write(f->handle,buf+0x8000,0x8000);
-	    }
-	totalbytes += writtenbytes;
-	f->offset += writtenbytes;
-	buf += 0x10000;
-	bytes -= 0x10000;
-	}
-    if (initComplete)
-	writtenbytes = R0_WriteFile(false,(HANDLE)f->handle,buf,bytes,f->offset,&error);
-    else
-	writtenbytes = i_write(f->handle,buf,bytes);
-    totalbytes += writtenbytes;
-    f->offset += writtenbytes;
-    if (f->offset > f->filesize)
-	f->filesize = f->offset;
-    return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
-    FILE *f)
-{
-    /* Nothing to do since we are not doing buffered file I/O */
-    (void)f;
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
-    FILE *f,
-    long int offset,
-    int whence)
-{
-    if (whence == 0)
-	f->offset = offset;
-    else if (whence == 1)
-	f->offset += offset;
-    else if (whence == 2)
-	f->offset = f->filesize + offset;
-    if (!initComplete)
-	i_lseek(f->handle,f->offset,0);
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
-    FILE *f)
-{
-    return f->offset;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
-    FILE *f)
-{
-    return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
-    char *s,
-    int n,
-    FILE *f)
-{
-    int     len;
-    char    *cs;
-
-    /* Read the entire buffer into memory (our functions are unbuffered!) */
-    if ((len = fread(s,1,n,f)) == 0)
-	return NULL;
-
-    /* Search for '\n' or end of string */
-    if (n > len)
-	n = len;
-    cs = s;
-    while (--n > 0) {
-	if (*cs == '\n')
-	    break;
-	cs++;
-	}
-    *cs = '\0';
-    return s;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
-    const char *s,
-    FILE *f)
-{
-    return fwrite(s,1,strlen(s),f);
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
-    FILE *f)
-{
-    WORD error;
-
-    if (initComplete)
-	R0_CloseFile((HANDLE)f->handle,&error);
-    else
-	i_close(f->handle);
-    PM_free(f);
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h
deleted file mode 100644
index 7efc0f9f85..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c
deleted file mode 100644
index 4cb7f19ed4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c
+++ /dev/null
@@ -1,1359 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED           100
-#define MAX_MEMORY_MAPPINGS         100
-
-typedef struct {
-    void    *linear;
-    ulong   global;
-    ulong   length;
-    int     npages;
-    } memshared;
-
-typedef struct {
-    ulong   physical;
-    ulong   linear;
-    ulong   length;
-    int     npages;
-    ibool   isCached;
-    } mmapping;
-
-static int          numMappings = 0;
-static memshared    shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping     maps[MAX_MEMORY_MAPPINGS];
-extern ibool        _PM_haveBIOS;
-char                _PM_cntPath[PM_MAX_PATH] = "";
-char                _PM_nucleusPath[PM_MAX_PATH] = "";
-uchar               *_PM_rmBufAddr = NULL;
-ushort _VARAPI      _PM_savedDS = 0;
-static uchar        _PM_oldCMOSRegA;
-static uchar        _PM_oldCMOSRegB;
-PM_intHandler       _PM_rtcHandler = NULL;
-IRQHANDLE           RTCIRQHandle = 0;
-VPICD_HWInt_THUNK   RTCInt_Thunk;
-
-static char *szWindowsKey       = "Software\\Microsoft\\Windows\\CurrentVersion";
-static char *szSystemRoot       = "SystemRoot";
-static char *szMachineNameKey   = "System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineName      = "ComputerName";
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-ulong   PMAPI _PM_getPDB(void);
-uchar   PMAPI _PM_readCMOS(int index);
-void    PMAPI _PM_writeCMOS(int index,uchar value);
-
-/****************************************************************************
-REMARKS:
-PM_malloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_malloc(
-    size_t size)
-{
-    return PM_mallocShared(size);
-}
-
-/****************************************************************************
-REMARKS:
-PM_calloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_calloc(
-    size_t nelem,
-    size_t size)
-{
-    void *p = PM_mallocShared(nelem * size);
-    if (p)
-	memset(p,0,nelem * size);
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_realloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_realloc(
-    void *ptr,
-    size_t size)
-{
-    void *p = PM_mallocShared(size);
-    if (p) {
-	memcpy(p,ptr,size);
-	PM_freeShared(ptr);
-	}
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_free override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void VXD_free(
-    void *p)
-{
-    PM_freeShared(p);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    /* Override the default memory allocators for all Nucleus drivers
-     * loaded in SDDHELP/PMHELP. We do this so that we can ensure all memory
-     * dynamically allocated by Nucleus drivers and internal C runtime
-     * library functions are shared memory blocks that all processes
-     * connecting to SDDHELP can see.
-     */
-    PM_useLocalMalloc(VXD_malloc,VXD_calloc,VXD_realloc,VXD_free);
-
-    /* Initialiase the MTRR module */
-    MTRR_init();
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return _PM_haveBIOS; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_WIN32VXD; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    Fatal_Error_Handler(msg,0);
-}
-
-/****************************************************************************
-PARAMETERS:
-len     - Place to store the length of the buffer
-rseg    - Place to store the real mode segment of the buffer
-roff    - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer that is used for communicating with the VESA BIOS functions from
-Win16 and Win32 programs under Windows.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    /* If the VxD is dynamically loaded we will not have a real mode
-     * transfer buffer to return, so we fail the call.
-     */
-    if (_PM_rmBufAddr) {
-	*len = VESA_BUF_SIZE;
-	*rseg = (ulong)(_PM_rmBufAddr) >> 4;
-	*roff = (ulong)(_PM_rmBufAddr) & 0xF;
-	return _PM_rmBufAddr;
-	}
-    return NULL;
-}
-
-int PMAPI PM_int386(
-    int intno,
-    PMREGS *in,
-    PMREGS *out)
-{
-    /* Unused in VxDs */
-    return 0;
-}
-
-void PMAPI _PM_getRMvect(
-    int intno,
-    long *realisr)
-{
-    WORD    seg;
-    DWORD   off;
-
-    Get_V86_Int_Vector(intno,&seg,&off);
-    *realisr = ((long)seg << 16) | (off & 0xFFFF);
-}
-
-void PMAPI _PM_setRMvect(
-    int intno,
-    long realisr)
-{
-    Set_V86_Int_Vector(intno,realisr >> 16,realisr & 0xFFFF);
-}
-
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    strncpy(path,_PM_cntPath,maxLen);
-    path[maxLen-1] = 0;
-    return path;
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'c'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-/****************************************************************************
-PARAMETERS:
-szKey       - Key to query (can contain version number formatting)
-szValue     - Value to get information for
-value       - Place to store the registry key data read
-size        - Size of the string buffer to read into
-
-RETURNS:
-true if the key was found, false if not.
-****************************************************************************/
-static ibool REG_queryString(
-    char *szKey,
-    char *szValue,
-    char *value,
-    ulong size)
-{
-    HKEY    hKey;
-    ulong   type;
-    ibool   status = false;
-
-    memset(value,0,sizeof(value));
-    if (RegOpenKey(HKEY_LOCAL_MACHINE,szKey,&hKey) == ERROR_SUCCESS) {
-	if (RegQueryValueEx(hKey,(PCHAR)szValue,(ulong*)NULL,(ulong*)&type,value,(ulong*)&size) == ERROR_SUCCESS)
-	    status = true;
-	RegCloseKey(hKey);
-	}
-    return status;
-}
-
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[256];
-
-    if (strlen(_PM_nucleusPath) > 0) {
-	strcpy(path,_PM_nucleusPath);
-	PM_backslash(path);
-	return path;
-	}
-    if (!REG_queryString(szWindowsKey,szSystemRoot,path,sizeof(path)))
-	strcpy(path,"c:\\windows");
-    PM_backslash(path);
-    strcat(path,"system\\nucleus");
-    return path;
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return PM_getMachineName(); }
-
-const char * PMAPI PM_getMachineName(void)
-{
-    static char name[256];
-    if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
-	return name;
-    return "Unknown";
-}
-
-int PMAPI PM_kbhit(void)
-{ return 1; }
-
-int PMAPI PM_getch(void)
-{ return 0; }
-
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hwndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-    /* Unused in VxDs */
-    return NULL;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* Unused in VxDs */
-    return 1;
-}
-
-void PMAPI PM_saveConsoleState(
-    void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Unused in VxDs */
-}
-
-void PMAPI PM_setSuspendAppCallback(
-    int (_ASMAPIP saveState)(
-	int flags))
-{
-    /* Unused in VxDs */
-}
-
-void PMAPI PM_restoreConsoleState(
-    const void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Unused in VxDs */
-}
-
-void PMAPI PM_closeConsole(
-    PM_HWND hwndConsole)
-{
-    /* Unused in VxDs */
-}
-
-void PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x50,x);
-    PM_setByte(_biosPtr+0x51,y);
-}
-
-void PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    uchar *_biosPtr = PM_getBIOSPointer();
-    PM_setByte(_biosPtr+0x4A,width);
-    PM_setByte(_biosPtr+0x84,height-1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    MEMHANDLE   hMem;
-    DWORD       pgNum,nPages = (size + 0xFFF) >> 12;
-    int         i;
-
-    /* First find a free slot in our shared memory table */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].linear == 0)
-	    break;
-	}
-    if (i < MAX_MEMORY_SHARED) {
-	PageAllocate(nPages,PG_SYS,0,0,0,0,NULL,0,&hMem,&shared[i].linear);
-	shared[i].npages = nPages;
-	pgNum = (ulong)shared[i].linear >> 12;
-	shared[i].global = LinPageLock(pgNum,nPages,PAGEMAPGLOBAL);
-	return (void*)shared[i].global;
-	}
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(void *p)
-{
-    int i;
-
-    /* Find a shared memory block in our table and free it */
-    for (i = 0; i < MAX_MEMORY_SHARED; i++) {
-	if (shared[i].global == (ulong)p) {
-	    LinPageUnLock(shared[i].global >> 12,shared[i].npages,PAGEMAPGLOBAL);
-	    PageFree((ulong)shared[i].linear,0);
-	    shared[i].linear = 0;
-	    break;
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Maps a shared memory block into process address space. Does nothing since
-the memory blocks are already globally7 mapped into all processes.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    return (void*)base;
-}
-
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    /* TODO: Figure out how to do this */
-    return false;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return (void*)0x400; }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-/****************************************************************************
-PARAMETERS:
-base        - Physical base address of the memory to maps in
-limit       - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-ulong _PM_mapPhysicalToLinear(
-    ulong base,
-    ulong limit,
-    int *npages)
-{
-    ulong   linear,length = limit+1;
-    int     i,ppage,flags;
-
-    if (base < 0x100000) {
-	/* Windows 9x is zero based for the first meg of memory */
-	return base;
-	}
-    ppage = base >> 12;
-    *npages = (length + (base & 0xFFF) + 4095) >> 12;
-    flags = PR_FIXED | PR_STATIC;
-    if (base == 0xA0000) {
-	/* We require the linear address to be aligned to a 64Kb boundary
-	 * for mapping the banked framebuffer (so we can do efficient
-	 * carry checking for bank changes in the assembler code). The only
-	 * way to ensure this is to force the linear address to be aligned
-	 * to a 4Mb boundary.
-	 */
-	flags |= PR_4MEG;
-	}
-    if ((linear = (ulong)PageReserve(PR_SYSTEM,*npages,flags)) == (ulong)-1)
-	return 0xFFFFFFFF;
-    if (!PageCommitPhys(linear >> 12,*npages,ppage,PC_INCR | PC_USER | PC_WRITEABLE))
-	return 0xFFFFFFFF;
-    return linear + (base & 0xFFF);
-}
-
-/* Page table flags */
-
-#define PAGE_FLAGS_PRESENT			0x00000001
-#define PAGE_FLAGS_WRITEABLE		0x00000002
-#define PAGE_FLAGS_USER				0x00000004
-#define PAGE_FLAGS_WRITE_THROUGH	0x00000008
-#define PAGE_FLAGS_CACHE_DISABLE	0x00000010
-#define PAGE_FLAGS_ACCESSED			0x00000020
-#define PAGE_FLAGS_DIRTY			0x00000040
-#define PAGE_FLAGS_4MB	            0x00000080
-
-/****************************************************************************
-PARAMETERS:
-base        - Physical base address of the memory to maps in
-limit       - Limit of physical memory to region to maps in
-isCached    - True if the memory should be cached, false if not
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-This function maps physical memory to linear memory, which can then be used
-to create a selector or used directly from 32-bit protected mode programs.
-This is better than DPMI 0x800, since it allows you to maps physical
-memory below 1Mb, which gets this memory out of the way of the Windows VDD's
-sticky paws.
-
-NOTE:   If the memory is not expected to be cached, this function will
-	directly re-program the PCD (Page Cache Disable) bit in the
-	page tables. There does not appear to be a mechanism in the VMM
-	to control this bit via the regular interface.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    ulong   linear,length = limit+1;
-    int     i,npages;
-    ulong   PDB,*pPDB;
-
-    /* Search table of existing mappings to see if we have already mapped
-     * a region of memory that will serve this purpose.
-     */
-    for (i = 0; i < numMappings; i++) {
-	if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached)
-	    return (void*)maps[i].linear;
-	}
-    if (numMappings == MAX_MEMORY_MAPPINGS)
-	return NULL;
-
-    /* We did not find any previously mapped memory region, so maps it in.
-     * Note that we do not use MapPhysToLinear, since this function appears
-     * to have problems mapping memory in the 1Mb physical address space.
-     * Hence we use PageReserve and PageCommitPhys.
-     */
-    if ((linear = _PM_mapPhysicalToLinear(base,limit,&npages)) == 0xFFFFFFFF)
-	return NULL;
-    maps[numMappings].physical = base;
-    maps[numMappings].length = length;
-    maps[numMappings].linear = linear;
-    maps[numMappings].npages = npages;
-    maps[numMappings].isCached = isCached;
-    numMappings++;
-
-    /* Finally disable caching where necessary */
-    if (!isCached && (PDB = _PM_getPDB()) != 0) {
-	int     startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
-	ulong   pageTable,*pPageTable;
-	pPDB = (ulong*)_PM_mapPhysicalToLinear(PDB,0xFFF,&npages);
-	if (pPDB) {
-	    startPDB = (linear >> 22) & 0x3FF;
-	    startPage = (linear >> 12) & 0x3FF;
-	    endPDB = ((linear+limit) >> 22) & 0x3FF;
-	    endPage = ((linear+limit) >> 12) & 0x3FF;
-	    for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
-		/* Set the bits in the page directory entry - required as per */
-		/* Pentium 4 manual. This also takes care of the 4MB page entries */
-		pPDB[iPDB] = pPDB[iPDB] |= (PAGE_FLAGS_WRITE_THROUGH | PAGE_FLAGS_CACHE_DISABLE);
-		if (!(pPDB[iPDB] & PAGE_FLAGS_4MB)) {
-		    /* If we are dealing with 4KB pages then we need to iterate */
-		    /* through each of the page table entries */
-		    pageTable = pPDB[iPDB] & ~0xFFF;
-		    pPageTable = (ulong*)_PM_mapPhysicalToLinear(pageTable,0xFFF,&npages);
-		    start = (iPDB == startPDB) ? startPage : 0;
-		    end = (iPDB == endPDB) ? endPage : 0x3FF;
-		    for (iPage = start; iPage <= end; iPage++)
-			pPageTable[iPage] |= (PAGE_FLAGS_WRITE_THROUGH | PAGE_FLAGS_CACHE_DISABLE);
-		    PageFree((ulong)pPageTable,PR_STATIC);
-		    }
-		}
-	    PageFree((ulong)pPDB,PR_STATIC);
-	    PM_flushTLB();
-	    }
-	}
-    return (void*)linear;
-}
-
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    /* We never free the mappings */
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
-    /* We never sleep in a VxD */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	case 2: return 0x3E8;
-	case 3: return 0x2E8;
-	}
-    return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-ulong PMAPI PM_getPhysicalAddr(
-    void *p)
-{
-    DWORD   pte;
-
-    /* Touch the memory before calling CopyPageTable. For some reason */
-    /* we need to do this on Windows 9x, otherwise the memory may not */
-    /* be paged in correctly. Of course if the passed in pointer is */
-    /* invalid, this function will fault, but we shouldn't be passed bogus */
-    /* pointers anyway ;-) */
-    pte = *((ulong*)p);
-
-    /* Return assembled address value only if VMM service succeeds */
-    if (CopyPageTable(((DWORD)p) >> 12, 1, (PVOID*)&pte, 0))
-	return (pte & ~0xFFF) | (((DWORD)p) & 0xFFF);
-
-    /* Return failure to the caller! */
-    return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    int     i;
-    ulong   linear = (ulong)p & ~0xFFF;
-
-    for (i = (length + 0xFFF) >> 12; i > 0; i--) {
-	if ((*physAddress++ = PM_getPhysicalAddr((void*)linear)) == 0xFFFFFFFF)
-	    return false;
-	linear += 4096;
-	}
-    return true;
-}
-
-void PMAPI _PM_freeMemoryMappings(void)
-{
-    int i;
-    for (i = 0; i < numMappings; i++)
-	PageFree(maps[i].linear,PR_STATIC);
-}
-
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    return (void*)MK_PHYS(r_seg,r_off);
-}
-
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    return NULL;
-}
-
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-}
-
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    /* Unsed in VxD's */
-}
-
-/****************************************************************************
-REMARKS:
-Load the V86 registers in the client state, and save the original state
-before loading the registers.
-****************************************************************************/
-static void LoadV86Registers(
-    CLIENT_STRUCT *saveRegs,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    CLIENT_STRUCT   newRegs;
-
-    Save_Client_State(saveRegs);
-    newRegs = *saveRegs;
-    newRegs.CRS.Client_EAX = in->e.eax;
-    newRegs.CRS.Client_EBX = in->e.ebx;
-    newRegs.CRS.Client_ECX = in->e.ecx;
-    newRegs.CRS.Client_EDX = in->e.edx;
-    newRegs.CRS.Client_ESI = in->e.esi;
-    newRegs.CRS.Client_EDI = in->e.edi;
-    newRegs.CRS.Client_ES = sregs->es;
-    newRegs.CRS.Client_DS = sregs->ds;
-    Restore_Client_State(&newRegs);
-}
-
-/****************************************************************************
-REMARKS:
-Read the V86 registers from the client state and restore the original state.
-****************************************************************************/
-static void ReadV86Registers(
-    CLIENT_STRUCT *saveRegs,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    CLIENT_STRUCT   newRegs;
-
-    Save_Client_State(&newRegs);
-    out->e.eax = newRegs.CRS.Client_EAX;
-    out->e.ebx = newRegs.CRS.Client_EBX;
-    out->e.ecx = newRegs.CRS.Client_ECX;
-    out->e.edx = newRegs.CRS.Client_EDX;
-    out->e.esi = newRegs.CRS.Client_ESI;
-    out->e.edi = newRegs.CRS.Client_EDI;
-    sregs->es = newRegs.CRS.Client_ES;
-    sregs->ds = newRegs.CRS.Client_DS;
-    Restore_Client_State(saveRegs);
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *regs,
-    RMSREGS *sregs)
-{
-    CLIENT_STRUCT saveRegs;
-
-    /* Bail if we do not have BIOS access (ie: the VxD was dynamically
-     * loaded, and not statically loaded.
-     */
-    if (!_PM_haveBIOS)
-	return;
-
-    _TRACE("SDDHELP: Entering PM_callRealMode()\n");
-    Begin_Nest_V86_Exec();
-    LoadV86Registers(&saveRegs,regs,sregs);
-    Simulate_Far_Call(seg, off);
-    Resume_Exec();
-    ReadV86Registers(&saveRegs,regs,sregs);
-    End_Nest_Exec();
-    _TRACE("SDDHELP: Exiting PM_callRealMode()\n");
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    RMSREGS         sregs = {0};
-    CLIENT_STRUCT   saveRegs;
-    ushort          oldDisable;
-
-    /* Bail if we do not have BIOS access (ie: the VxD was dynamically
-     * loaded, and not statically loaded.
-     */
-    if (!_PM_haveBIOS) {
-	*out = *in;
-	return out->x.ax;
-	}
-
-    /* Disable pass-up to our VxD handler so we directly call BIOS */
-    _TRACE("SDDHELP: Entering PM_int86()\n");
-    if (disableTSRFlag) {
-	oldDisable = *disableTSRFlag;
-	*disableTSRFlag = 0;
-	}
-    Begin_Nest_V86_Exec();
-    LoadV86Registers(&saveRegs,in,&sregs);
-    Exec_Int(intno);
-    ReadV86Registers(&saveRegs,out,&sregs);
-    End_Nest_Exec();
-
-    /* Re-enable pass-up to our VxD handler if previously enabled */
-    if (disableTSRFlag)
-	*disableTSRFlag = oldDisable;
-
-    _TRACE("SDDHELP: Exiting PM_int86()\n");
-    return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    CLIENT_STRUCT   saveRegs;
-    ushort          oldDisable;
-
-    /* Bail if we do not have BIOS access (ie: the VxD was dynamically
-     * loaded, and not statically loaded.
-     */
-    if (!_PM_haveBIOS) {
-	*out = *in;
-	return out->x.ax;
-	}
-
-    /* Disable pass-up to our VxD handler so we directly call BIOS */
-    _TRACE("SDDHELP: Entering PM_int86x()\n");
-    if (disableTSRFlag) {
-	oldDisable = *disableTSRFlag;
-	*disableTSRFlag = 0;
-	}
-    Begin_Nest_V86_Exec();
-    LoadV86Registers(&saveRegs,in,sregs);
-    Exec_Int(intno);
-    ReadV86Registers(&saveRegs,out,sregs);
-    End_Nest_Exec();
-
-    /* Re-enable pass-up to our VxD handler if previously enabled */
-    if (disableTSRFlag)
-	*disableTSRFlag = oldDisable;
-
-    _TRACE("SDDHELP: Exiting PM_int86x()\n");
-    return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Returns available memory. Not possible under Windows.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    MEMHANDLE   hMem;
-    DWORD       nPages = (size + 0xFFF) >> 12;
-    DWORD       flags = PAGEFIXED | PAGEUSEALIGN | (contiguous ? PAGECONTIG : 0);
-    DWORD       maxPhys = below16M ? 0x00FFFFFF : 0xFFFFFFFF;
-    void        *p;
-
-    /* TODO: This may need to be modified if the memory needs to be globally */
-    /*       accessible. Check how we implemented PM_mallocShared() as we */
-    /*       may need to do something similar in here. */
-    PageAllocate(nPages,PG_SYS,0,0,0,maxPhys,physAddr,flags,&hMem,&p);
-
-    /* TODO: We may need to modify the memory blocks to disable caching via */
-    /*       the page tables (PCD|PWT) since DMA memory blocks *cannot* be */
-    /*       cached! */
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    if (p)
-	PageFree((ulong)p,0);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    MEMHANDLE   hMem;
-    void        *p;
-
-    /* TODO: This will need to be modified if the memory needs to be globally */
-    /*       accessible. Check how we implemented PM_mallocShared() as we */
-    /*       may need to do something similar in here. */
-    PageAllocate(1,PG_SYS,0,0,0,0,0,PAGEFIXED,&hMem,&p);
-    return p;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
-    void *p)
-{
-    if (p)
-	PageFree((ulong)p,0);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lh)
-{
-    DWORD pgNum = (ulong)p >> 12;
-    DWORD nPages = (len + (ulong)p - (pgNum << 12) + 0xFFF) >> 12;
-    return LinPageLock(pgNum,nPages,0);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
-    void *p,
-    uint len,
-    PM_lockHandle *lh)
-{
-    DWORD pgNum = (ulong)p >> 12;
-    DWORD nPages = (len + (ulong)p - (pgNum << 12) + 0xFFF) >> 12;
-    return LinPageUnLock(pgNum,nPages,0);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lh)
-{
-    return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
-    void (*p)(),
-    uint len,
-    PM_lockHandle *lh)
-{
-    return PM_unlockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    static short convert[] = {
-	8192,
-	4096,
-	2048,
-	1024,
-	512,
-	256,
-	128,
-	64,
-	32,
-	16,
-	8,
-	4,
-	2,
-	-1,
-	};
-    int i;
-
-    /* First clear any pending RTC timeout if not cleared */
-    _PM_readCMOS(0x0C);
-    if (frequency == 0) {
-	/* Disable RTC timout */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
-	}
-    else {
-	/* Convert frequency value to RTC clock indexes */
-	for (i = 0; convert[i] != -1; i++) {
-	    if (convert[i] == frequency)
-		break;
-	    }
-
-	/* Set RTC timout value and enable timeout */
-	_PM_writeCMOS(0x0A,0x20 | (i+3));
-	_PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Real time clock interrupt handler, which calls the user registered C code.
-****************************************************************************/
-static BOOL __stdcall RTCInt_Handler(
-    VMHANDLE hVM,
-    IRQHANDLE hIRQ)
-{
-    static char inside = 0;
-
-    /* Clear priority interrupt controller and re-enable interrupts so we
-     * dont lock things up for long.
-     */
-    VPICD_Phys_EOI(hIRQ);
-
-    /* Clear real-time clock timeout */
-    _PM_readCMOS(0x0C);
-
-    /* Now call the C based interrupt handler (but check for mutual
-     * exclusion since we may still be servicing an old interrupt when a
-     * new one comes along; if that happens we ignore the old one).
-     */
-    if (!inside) {
-	inside = 1;
-	enable();
-	_PM_rtcHandler();
-	inside = 0;
-	}
-    return TRUE;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
-    PM_intHandler ih,
-    int frequency)
-{
-    struct VPICD_IRQ_Descriptor IRQdesc;
-
-    /* Save the old CMOS real time clock values */
-    _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
-    _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
-    /* Set the real time clock interrupt handler */
-    CHECK(ih != NULL);
-    _PM_rtcHandler = ih;
-    IRQdesc.VID_IRQ_Number      = 0x8;
-    IRQdesc.VID_Options         = 0;
-    IRQdesc.VID_Hw_Int_Proc     = (DWORD)VPICD_Thunk_HWInt(RTCInt_Handler, &RTCInt_Thunk);
-    IRQdesc.VID_EOI_Proc        = 0;
-    IRQdesc.VID_Virt_Int_Proc   = 0;
-    IRQdesc.VID_Mask_Change_Proc= 0;
-    IRQdesc.VID_IRET_Proc       = 0;
-    IRQdesc.VID_IRET_Time_Out   = 500;
-    if ((RTCIRQHandle = VPICD_Virtualize_IRQ(&IRQdesc)) == 0)
-	return false;
-
-    /* Program the real time clock default frequency */
-    PM_setRealTimeClockFrequency(frequency);
-
-    /* Unmask IRQ8 in the PIC */
-    VPICD_Physically_Unmask(RTCIRQHandle);
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    if (RTCIRQHandle) {
-	/* Restore CMOS registers and mask RTC clock */
-	_PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
-	_PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-
-	/* Restore the interrupt vector */
-	VPICD_Set_Auto_Masking(RTCIRQHandle);
-	VPICD_Force_Default_Behavior(RTCIRQHandle);
-	RTCIRQHandle = 0;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    (void)szDLLName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    (void)hModule;
-    (void)szProcName;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    /* TODO: This function should start a directory enumeration search */
-    /*       given the filename (with wildcards). The data should be */
-    /*       converted and returned in the findData standard form. */
-    (void)filename;
-    (void)findData;
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    /* TODO: This function should find the next file in directory enumeration */
-    /*       search given the search criteria defined in the call to */
-    /*       PM_findFirstFile. The data should be converted and returned */
-    /*       in the findData standard form. */
-    (void)handle;
-    (void)findData;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    /* TODO: This function should close the find process. This may do */
-    /*       nothing for some OS'es. */
-    (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    /* Not supported in a VxD */
-    (void)drive;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    /* Not supported in a VxD */
-    (void)drive;
-    (void)dir;
-    (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base    - The starting physical base address of the region
-size    - The size in bytes of the region
-type    - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong size,
-    uint type)
-{
-    return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    /* TODO: Implement this */
-    (void)filename;
-    (void)attrib;
-    PM_fatalError("PM_setFileAttr not implemented yet!");
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    /* TODO: Implement this */
-    (void)filename;
-    PM_fatalError("PM_getFileAttr not implemented yet!");
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    /* TODO: Implement this */
-    (void)filename;
-    PM_fatalError("PM_mkdir not implemented yet!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    /* TODO: Implement this */
-    (void)filename;
-    PM_fatalError("PM_rmdir not implemented yet!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_getFileTime not implemented yet!");
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    /* TODO: Implement this! */
-    (void)filename;
-    (void)gmTime;
-    (void)time;
-    PM_fatalError("PM_setFileTime not implemented yet!");
-    return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c
deleted file mode 100644
index 901ce1cf03..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c
deleted file mode 100644
index 76df48c38b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  32-bit Windows VxD
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong    frequency = 1193180;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-#define __ZTimerInit()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm)     VTD_Get_Real_Time(&tm->start.high,&tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    lap,count;
-    VTD_Get_Real_Time(&lap.high,&lap.low);
-    _CPU_diffTime64(&tm->start,&lap,&count);
-    return _CPU_calcMicroSec(&count,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm)    VTD_Get_Real_Time(&tm->end.high,&tm->end.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger tmCount;
-    _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-    return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
-    CPU_largeInteger count;
-    VTD_Get_Real_Time(&count.high,&count.low);
-    return (count.low * 1000.0 / frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm b/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm
deleted file mode 100644
index 7c242b5724..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm
+++ /dev/null
@@ -1,78 +0,0 @@
-;****************************************************************************
-;*
-;*                  SciTech OS Portability Manager Library
-;*
-;*  ========================================================================
-;*
-;*    The contents of this file are subject to the SciTech MGL Public
-;*    License Version 1.0 (the "License"); you may not use this file
-;*    except in compliance with the License. You may obtain a copy of
-;*    the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;*    Software distributed under the License is distributed on an
-;*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;*    implied. See the License for the specific language governing
-;*    rights and limitations under the License.
-;*
-;*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;*    The Initial Developer of the Original Code is SciTech Software, Inc.
-;*    All Rights Reserved.
-;*
-;*  ========================================================================
-;*
-;* Language:    80386 Assembler, TASM 4.0 or NASM
-;* Environment: Win32
-;*
-;* Description: Low level assembly support for the PM library specific
-;*              to Windows.
-;*
-;****************************************************************************
-
-        IDEAL
-
-include "scitech.mac"               ; Memory model macros
-
-header      _pmwin32                    ; Set up memory model
-
-begdataseg  _pmwin32
-
-        cglobal _PM_ioentry
-        cglobal _PM_gdt
-_PM_ioentry     dd  0               ; Offset to call gate
-_PM_gdt         dw  0               ; Selector to call gate
-
-enddataseg  _pmwin32
-
-begcodeseg  _pmwin32                    ; Start of code segment
-
-;----------------------------------------------------------------------------
-; int PM_setIOPL(int iopl)
-;----------------------------------------------------------------------------
-; Change the IOPL level for the 32-bit task. Returns the previous level
-; so it can be restored for the task correctly.
-;----------------------------------------------------------------------------
-cprocstart  _PM_setIOPLViaCallGate
-
-        ARG     iopl:UINT
-
-        enter_c
-        pushfd                      ; Save the old EFLAGS for later
-        mov     ecx,[iopl]          ; ECX := IOPL level
-        xor     ebx,ebx             ; Change IOPL level function code
-ifdef   USE_NASM
-        call far dword [_PM_ioentry]
-else
-        call    [FWORD _PM_ioentry]
-endif
-        pop     eax
-        and     eax,0011000000000000b
-        shr     eax,12
-        leave_c
-        ret
-
-cprocend
-
-endcodeseg  _pmwin32
-
-        END                         ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c
deleted file mode 100644
index 7da9752051..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  Module to implement OS specific services to measure the
-*               CPU frequency.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ibool havePerformanceCounter;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
-    int     oldPriority;
-    HANDLE  hThread = GetCurrentThread();
-
-    oldPriority = GetThreadPriority(hThread);
-    if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
-	SetThreadPriority(hThread, THREAD_PRIORITY_TIME_CRITICAL);
-    return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
-    int oldPriority)
-{
-    HANDLE  hThread = GetCurrentThread();
-
-    if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
-	SetThreadPriority(hThread, oldPriority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
-    CPU_largeInteger *freq)
-{
-    if (!QueryPerformanceFrequency((LARGE_INTEGER*)freq)) {
-	havePerformanceCounter = false;
-	freq->low = 100000;
-	freq->high = 0;
-	}
-    else
-	havePerformanceCounter = true;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t)                                       \
-{                                                           \
-    if (havePerformanceCounter)                             \
-	QueryPerformanceCounter((LARGE_INTEGER*)t);         \
-    else {                                                  \
-	(t)->low = timeGetTime() * 100;                     \
-	(t)->high = 0;                                      \
-	}                                                   \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c
deleted file mode 100644
index d6c3f60e84..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  Win32 implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-#include "event.h"
-#include "pmapi.h"
-#include "win32/oshdr.h"
-#include "nucleus/graphics.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-/* Publicly accessible variables */
-
-int                 _PM_deskX,_PM_deskY;/* Desktop dimentions           */
-HWND                _PM_hwndConsole;    /* Window handle for console    */
-#ifdef  __INTEL__
-uint                _PM_cw_default;     /* Default FPU control word     */
-#endif
-
-/* Private internal variables */
-
-static HINSTANCE    hInstApp = NULL;/* Application instance handle      */
-static HWND         hwndUser = NULL;/* User window handle               */
-static HINSTANCE    hInstDD = NULL; /* Handle to DirectDraw DLL         */
-static LPDIRECTDRAW lpDD = NULL;    /* DirectDraw object                */
-static LONG         oldWndStyle;    /* Info about old user window       */
-static LONG         oldExWndStyle;  /* Info about old user window       */
-static int          oldWinPosX;     /* Old window position X coordinate */
-static int          oldWinPosY;     /* Old window pisition Y coordinate */
-static int          oldWinSizeX;    /* Old window size X                */
-static int          oldWinSizeY;    /* Old window size Y                */
-static WNDPROC      oldWinProc = NULL;
-static PM_saveState_cb suspendApp = NULL;
-static ibool        waitActive = false;
-static ibool        isFullScreen = false;
-static ibool        backInGDI = false;
-
-/* Internal strings */
-
-static char *szWinClassName     = "SciTechDirectDrawWindow";
-static char *szAutoPlayKey      = "Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer";
-static char *szAutoPlayValue    = "NoDriveTypeAutoRun";
-
-/* Dynalinks to DirectDraw functions */
-
-static HRESULT (WINAPI *pDirectDrawCreate)(GUID FAR *lpGUID, LPDIRECTDRAW FAR *lplpDD, IUnknown FAR *pUnkOuter);
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Temporarily disables AutoPlay operation while we are running in fullscreen
-graphics modes.
-****************************************************************************/
-static void DisableAutoPlay(void)
-{
-    DWORD   dwAutoPlay,dwSize = sizeof(dwAutoPlay);
-    HKEY    hKey;
-
-    if (RegOpenKeyEx(HKEY_CURRENT_USER,szAutoPlayKey,0,KEY_EXECUTE | KEY_WRITE,&hKey) == ERROR_SUCCESS) {
-	RegQueryValueEx(hKey,szAutoPlayValue,NULL,NULL,(void*)&dwAutoPlay,&dwSize);
-	dwAutoPlay |= AUTOPLAY_DRIVE_CDROM;
-	RegSetValueEx(hKey,szAutoPlayValue,0,REG_DWORD,(void*)&dwAutoPlay,dwSize);
-	RegCloseKey(hKey);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Re-enables AutoPlay operation when we return to regular GDI mode.
-****************************************************************************/
-static void RestoreAutoPlay(void)
-{
-    DWORD   dwAutoPlay,dwSize = sizeof(dwAutoPlay);
-    HKEY    hKey;
-
-    if (RegOpenKeyEx(HKEY_CURRENT_USER,szAutoPlayKey,0,KEY_EXECUTE | KEY_WRITE,&hKey) == ERROR_SUCCESS) {
-	RegQueryValueEx(hKey,szAutoPlayValue,NULL,NULL,(void*)&dwAutoPlay,&dwSize);
-	dwAutoPlay &= ~AUTOPLAY_DRIVE_CDROM;
-	RegSetValueEx(hKey,szAutoPlayValue,0,REG_DWORD,(void*)&dwAutoPlay,dwSize);
-	RegCloseKey(hKey);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Suspends the application by switching back to the GDI desktop, allowing
-normal application code to be processed, and then waiting for the
-application activate command to bring us back to fullscreen mode with our
-window minimised.
-****************************************************************************/
-static void LeaveFullScreen(void)
-{
-    int retCode = PM_SUSPEND_APP;
-
-    if (backInGDI)
-	return;
-    if (suspendApp)
-	retCode = suspendApp(PM_DEACTIVATE);
-    RestoreAutoPlay();
-    backInGDI = true;
-
-    /* Now process messages normally until we are re-activated */
-    waitActive = true;
-    if (retCode != PM_NO_SUSPEND_APP) {
-	while (waitActive) {
-	    _EVT_pumpMessages();
-	    Sleep(200);
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Reactivate all the surfaces for DirectDraw and set the system back up for
-fullscreen rendering.
-****************************************************************************/
-static void RestoreFullScreen(void)
-{
-    static ibool    firstTime = true;
-
-    if (firstTime) {
-	/* Clear the message queue while waiting for the surfaces to be
-	 * restored.
-	 */
-	firstTime = false;
-	while (1) {
-	    /* Continue looping until out application has been restored
-	     * and we have reset the display mode.
-	     */
-	    _EVT_pumpMessages();
-	    if (GetActiveWindow() == _PM_hwndConsole) {
-		if (suspendApp)
-		    suspendApp(PM_REACTIVATE);
-		DisableAutoPlay();
-		backInGDI = false;
-		waitActive = false;
-		firstTime = true;
-		return;
-		}
-	    Sleep(200);
-	    }
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This function suspends the application by switching back to the GDI desktop,
-allowing normal application code to be processed and then waiting for the
-application activate command to bring us back to fullscreen mode with our
-window minimised.
-
-This version only gets called if we have not captured the screen switch in
-our activate message loops and will occur if the DirectDraw drivers lose a
-surface for some reason while rendering. This should not normally happen,
-but it is included just to be sure (it can happen on WinNT/2000 if the user
-hits the Ctrl-Alt-Del key combination). Note that this code will always
-spin loop, and we cannot disable the spin looping from this version (ie:
-if the user hits Ctrl-Alt-Del under WinNT/2000 the application main loop
-will cease to be executed until the user switches back to the application).
-****************************************************************************/
-void PMAPI PM_doSuspendApp(void)
-{
-    static  ibool firstTime = true;
-
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_doSuspendApp != PM_doSuspendApp) {
-	_PM_imports.PM_doSuspendApp();
-	return;
-	}
-
-    if (firstTime) {
-	if (suspendApp)
-	    suspendApp(PM_DEACTIVATE);
-	RestoreAutoPlay();
-	firstTime = false;
-	backInGDI = true;
-	}
-    RestoreFullScreen();
-    firstTime = true;
-}
-
-/****************************************************************************
-REMARKS:
-Main Window proc for the full screen DirectDraw Window that we create while
-running in full screen mode. Here we capture all mouse and keyboard events
-for the window and plug them into our event queue.
-****************************************************************************/
-static LONG CALLBACK PM_winProc(
-    HWND hwnd,
-    UINT msg,
-    WPARAM wParam,
-    LONG lParam)
-{
-    switch (msg) {
-	case WM_SYSCHAR:
-	    /* Stop Alt-Space from pausing our application */
-	    return 0;
-	case WM_KEYDOWN:
-	case WM_SYSKEYDOWN:
-	    if (HIWORD(lParam) & KF_REPEAT) {
-		if (msg == WM_SYSKEYDOWN)
-		    return 0;
-		break;
-		}
-	    /* Fall through for keydown events */
-	case WM_KEYUP:
-	case WM_SYSKEYUP:
-	    if (msg == WM_SYSKEYDOWN || msg == WM_SYSKEYUP) {
-		if ((HIWORD(lParam) & KF_ALTDOWN) && wParam == VK_RETURN)
-		    break;
-		/* We ignore the remainder of the system keys to stop the
-		 * system menu from being activated from the keyboard and pausing
-		 * our app while fullscreen (ie: pressing the Alt key).
-		 */
-		return 0;
-		}
-	    break;
-	case WM_SYSCOMMAND:
-	    switch (wParam & ~0x0F) {
-		case SC_SCREENSAVE:
-		case SC_MONITORPOWER:
-		    /* Ignore screensaver requests in fullscreen modes */
-		    return 0;
-		}
-	    break;
-	case WM_SIZE:
-	    if (waitActive && backInGDI && (wParam != SIZE_MINIMIZED)) {
-		/* Start the re-activation process */
-		PostMessage(hwnd,WM_DO_SUSPEND_APP,WM_PM_RESTORE_FULLSCREEN,0);
-		}
-	    else if (!waitActive && isFullScreen && !backInGDI && (wParam == SIZE_MINIMIZED)) {
-		/* Start the de-activation process */
-		PostMessage(hwnd,WM_DO_SUSPEND_APP,WM_PM_LEAVE_FULLSCREEN,0);
-		}
-	    break;
-	case WM_DO_SUSPEND_APP:
-	    switch (wParam) {
-				case WM_PM_RESTORE_FULLSCREEN:
-					RestoreFullScreen();
-					break;
-				case WM_PM_LEAVE_FULLSCREEN:
-					LeaveFullScreen();
-					break;
-		}
-	    return 0;
-	}
-    if (oldWinProc)
-	return oldWinProc(hwnd,msg,wParam,lParam);
-    return DefWindowProc(hwnd,msg,wParam,lParam);
-}
-
-/****************************************************************************
-PARAMETERS:
-hwnd    - User window to convert
-width   - Window of the fullscreen window
-height  - Height of the fullscreen window
-
-RETURNS:
-Handle to converted fullscreen Window.
-
-REMARKS:
-This function takes the original user window handle and modifies the size,
-position and attributes for the window to convert it into a fullscreen
-window that we can use.
-****************************************************************************/
-static PM_HWND _PM_convertUserWindow(
-    HWND hwnd,
-    int width,
-    int height)
-{
-    RECT    window;
-
-    GetWindowRect(hwnd,&window);
-    oldWinPosX = window.left;
-    oldWinPosY = window.top;
-    oldWinSizeX = window.right - window.left;
-    oldWinSizeY = window.bottom - window.top;
-    oldWndStyle = SetWindowLong(hwnd,GWL_STYLE,WS_POPUP | WS_SYSMENU);
-    oldExWndStyle = SetWindowLong(hwnd,GWL_EXSTYLE,WS_EX_APPWINDOW);
-    ShowWindow(hwnd,SW_SHOW);
-    MoveWindow(hwnd,0,0,width,height,TRUE);
-    SetWindowPos(hwnd,HWND_TOPMOST,0,0,0,0,SWP_NOMOVE | SWP_NOSIZE);
-    oldWinProc = (WNDPROC)SetWindowLong(hwnd,GWL_WNDPROC, (LPARAM)PM_winProc);
-    return hwnd;
-}
-
-/****************************************************************************
-PARAMETERS:
-hwnd    - User window to restore
-
-REMARKS:
-This function restores the original attributes of the user window and put's
-it back into it's original state before it was converted to a fullscreen
-window.
-****************************************************************************/
-static void _PM_restoreUserWindow(
-    HWND hwnd)
-{
-    SetWindowLong(hwnd,GWL_WNDPROC, (LPARAM)oldWinProc);
-    SetWindowLong(hwnd,GWL_EXSTYLE,oldExWndStyle);
-    SetWindowLong(hwnd,GWL_STYLE,oldWndStyle);
-    SetWindowPos(hwnd,HWND_NOTOPMOST,0,0,0,0,SWP_NOMOVE | SWP_NOSIZE);
-    ShowWindow(hwnd,SW_SHOW);
-    MoveWindow(hwnd,oldWinPosX,oldWinPosY,oldWinSizeX,oldWinSizeY,TRUE);
-    oldWinProc = NULL;
-}
-
-/****************************************************************************
-PARAMETERS:
-device  - Index of the device to load DirectDraw for (0 for primary)
-
-REMARKS:
-Attempts to dynamically load the DirectDraw DLL's and create the DirectDraw
-objects that we need.
-****************************************************************************/
-void * PMAPI PM_loadDirectDraw(
-    int device)
-{
-    HDC         hdc;
-    int         bits;
-
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_loadDirectDraw != PM_loadDirectDraw)
-	return _PM_imports.PM_loadDirectDraw(device);
-
-    /* TODO: Handle multi-monitor!! */
-    if (device != 0)
-	return NULL;
-
-    /* Load the DirectDraw DLL if not presently loaded */
-    GET_DEFAULT_CW();
-    if (!hInstDD) {
-	hdc = GetDC(NULL);
-	bits = GetDeviceCaps(hdc,BITSPIXEL);
-	ReleaseDC(NULL,hdc);
-	if (bits < 8)
-	    return NULL;
-	if ((hInstDD = LoadLibrary("ddraw.dll")) == NULL)
-	    return NULL;
-	pDirectDrawCreate = (void*)GetProcAddress(hInstDD,"DirectDrawCreate");
-	if (!pDirectDrawCreate)
-	    return NULL;
-	}
-
-    /* Create the DirectDraw object */
-    if (!lpDD && pDirectDrawCreate(NULL, &lpDD, NULL) != DD_OK) {
-	lpDD = NULL;
-	return NULL;
-	}
-    RESET_DEFAULT_CW();
-    return lpDD;
-}
-
-/****************************************************************************
-PARAMETERS:
-device  - Index of the device to unload DirectDraw for (0 for primary)
-
-REMARKS:
-Frees any DirectDraw objects for the device. We never actually explicitly
-unload the ddraw.dll library, since unloading and reloading it is
-unnecessary since we only want to unload it when the application exits and
-that happens automatically.
-****************************************************************************/
-void PMAPI PM_unloadDirectDraw(
-    int device)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_unloadDirectDraw != PM_unloadDirectDraw) {
-	_PM_imports.PM_unloadDirectDraw(device);
-	return;
-	}
-    if (lpDD) {
-	IDirectDraw_Release(lpDD);
-	lpDD = NULL;
-	}
-    (void)device;
-}
-
-/****************************************************************************
-REMARKS:
-Open a console for output to the screen, creating the main event handling
-window if necessary.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
-    PM_HWND hWndUser,
-    int device,
-    int xRes,
-    int yRes,
-    int bpp,
-    ibool fullScreen)
-{
-    WNDCLASS        cls;
-    static ibool    classRegistered = false;
-
-    /* Call system DLL version if found */
-    GA_getSystemPMImports();
-    if (_PM_imports.PM_openConsole != PM_openConsole) {
-	if (fullScreen) {
-	    _PM_deskX = xRes;
-	    _PM_deskY = yRes;
-	    }
-	return _PM_imports.PM_openConsole(hWndUser,device,xRes,yRes,bpp,fullScreen);
-	}
-
-    /* Create the fullscreen window if necessary */
-    hwndUser = hWndUser;
-    if (fullScreen) {
-	if (!classRegistered) {
-	    /* Create a Window class for the fullscreen window in here, since
-	     * we need to register one that will do all our event handling for
-	     * us.
-	     */
-	    hInstApp            = GetModuleHandle(NULL);
-	    cls.hCursor         = LoadCursor(NULL,IDC_ARROW);
-	    cls.hIcon           = LoadIcon(hInstApp,MAKEINTRESOURCE(1));
-	    cls.lpszMenuName    = NULL;
-	    cls.lpszClassName   = szWinClassName;
-	    cls.hbrBackground   = GetStockObject(BLACK_BRUSH);
-	    cls.hInstance       = hInstApp;
-	    cls.style           = CS_DBLCLKS;
-	    cls.lpfnWndProc     = PM_winProc;
-	    cls.cbWndExtra      = 0;
-	    cls.cbClsExtra      = 0;
-	    if (!RegisterClass(&cls))
-		return NULL;
-	    classRegistered = true;
-	    }
-	_PM_deskX = xRes;
-	_PM_deskY = yRes;
-	if (!hwndUser) {
-	    char windowTitle[80];
-	    if (LoadString(hInstApp,1,windowTitle,sizeof(windowTitle)) == 0)
-		strcpy(windowTitle,"MGL Fullscreen Application");
-	    _PM_hwndConsole = CreateWindowEx(WS_EX_APPWINDOW,szWinClassName,
-		windowTitle,WS_POPUP | WS_SYSMENU,0,0,xRes,yRes,
-		NULL,NULL,hInstApp,NULL);
-	    }
-	else {
-	    _PM_hwndConsole = _PM_convertUserWindow(hwndUser,xRes,yRes);
-	    }
-	ShowCursor(false);
-	isFullScreen = true;
-	}
-    else {
-	_PM_hwndConsole = hwndUser;
-	isFullScreen = false;
-	}
-    SetFocus(_PM_hwndConsole);
-    SetForegroundWindow(_PM_hwndConsole);
-    DisableAutoPlay();
-    (void)bpp;
-    return _PM_hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_getConsoleStateSize != PM_getConsoleStateSize)
-	return _PM_imports.PM_getConsoleStateSize();
-
-    /* Not used in Windows */
-    return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
-    void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_saveConsoleState != PM_saveConsoleState) {
-	_PM_imports.PM_saveConsoleState(stateBuf,hwndConsole);
-	return;
-	}
-
-    /* Not used in Windows */
-    (void)stateBuf;
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
-    PM_saveState_cb saveState)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_setSuspendAppCallback != PM_setSuspendAppCallback) {
-	_PM_imports.PM_setSuspendAppCallback(saveState);
-	return;
-	}
-    suspendApp = saveState;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
-    const void *stateBuf,
-    PM_HWND hwndConsole)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_restoreConsoleState != PM_restoreConsoleState) {
-	_PM_imports.PM_restoreConsoleState(stateBuf,hwndConsole);
-	return;
-	}
-
-    /* Not used in Windows */
-    (void)stateBuf;
-    (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
-    PM_HWND hwndConsole)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_closeConsole != PM_closeConsole) {
-	_PM_imports.PM_closeConsole(hwndConsole);
-	return;
-	}
-    ShowCursor(true);
-    RestoreAutoPlay();
-    if (hwndUser)
-	_PM_restoreUserWindow(hwndConsole);
-    else
-	DestroyWindow(hwndConsole);
-    hwndUser = NULL;
-    _PM_hwndConsole = NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Return the DirectDraw window handle used by the application.
-****************************************************************************/
-PM_HWND PMAPI PM_getDirectDrawWindow(void)
-{
-    /* Call system DLL version if found */
-    if (_PM_imports.PM_getDirectDrawWindow != PM_getDirectDrawWindow)
-	return _PM_imports.PM_getDirectDrawWindow();
-    return _PM_hwndConsole;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c b/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
deleted file mode 100644
index 6388052ce7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech Multi-platform Graphics Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  Win32 implementation for the SciTech cross platform
-*               event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort   keyUpMsg[256] = {0};    /* Table of key up messages     */
-static int      rangeX,rangeY;          /* Range of mouse coordinates   */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Win32 */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)  (void)(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Win32 into our event queue.
-****************************************************************************/
-void _EVT_pumpMessages(void)
-{
-    MSG     msg;
-    MSG     charMsg;
-    event_t evt;
-
-    /* TODO: Add support for DirectInput! We can't support relative mouse */
-    /*       movement motion counters without DirectInput ;-(. */
-    while (PeekMessage(&msg,NULL,0,0,PM_REMOVE)) {
-	memset(&evt,0,sizeof(evt));
-	switch (msg.message) {
-	    case WM_MOUSEMOVE:
-		evt.what = EVT_MOUSEMOVE;
-		break;
-	    case WM_LBUTTONDBLCLK:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_LEFTBMASK | EVT_DBLCLICK;
-		break;
-	    case WM_LBUTTONDOWN:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_LEFTBMASK;
-		break;
-	    case WM_LBUTTONUP:
-		evt.what = EVT_MOUSEUP;
-		evt.message = EVT_LEFTBMASK;
-		break;
-	    case WM_RBUTTONDBLCLK:
-		evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_RBUTTONDOWN:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_RBUTTONUP:
-		evt.what = EVT_MOUSEUP;
-		evt.message = EVT_RIGHTBMASK;
-		break;
-	    case WM_MBUTTONDBLCLK:
-		evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
-		evt.message = EVT_MIDDLEBMASK;
-		break;
-	    case WM_MBUTTONDOWN:
-		evt.what = EVT_MOUSEDOWN;
-		evt.message = EVT_MIDDLEBMASK;
-		break;
-	    case WM_MBUTTONUP:
-		evt.what = EVT_MOUSEUP;
-		evt.message = EVT_MIDDLEBMASK;
-		break;
-	    case WM_KEYDOWN:
-	    case WM_SYSKEYDOWN:
-		if (HIWORD(msg.lParam) & KF_REPEAT) {
-		    evt.what = EVT_KEYREPEAT;
-		    }
-		else {
-		    evt.what = EVT_KEYDOWN;
-		    }
-		break;
-	    case WM_KEYUP:
-	    case WM_SYSKEYUP:
-		evt.what = EVT_KEYUP;
-		break;
-	    }
-
-	/* Convert mouse event modifier flags */
-	if (evt.what & EVT_MOUSEEVT) {
-	    if (_PM_deskX) {
-		evt.where_x = ((long)msg.pt.x * rangeX) / _PM_deskX;
-		evt.where_y = ((long)msg.pt.y * rangeY) / _PM_deskY;
-		}
-	    else {
-		ScreenToClient(_PM_hwndConsole, &msg.pt);
-		evt.where_x = msg.pt.x;
-		evt.where_y = msg.pt.y;
-		}
-	    if (evt.what == EVT_MOUSEMOVE) {
-		/* Save the current mouse position */
-		EVT.mx = evt.where_x;
-		EVT.my = evt.where_y;
-		if (EVT.oldMove != -1) {
-		    EVT.evtq[EVT.oldMove].where_x = evt.where_x;/* Modify existing one  */
-		    EVT.evtq[EVT.oldMove].where_y = evt.where_y;
-/*                  EVT.evtq[EVT.oldMove].relative_x += mickeyX;    / / TODO! */
-/*                  EVT.evtq[EVT.oldMove].relative_y += mickeyY;    / / TODO! */
-		    evt.what = 0;
-		    }
-		else {
-		    EVT.oldMove = EVT.freeHead; /* Save id of this move event   */
-/*                  evt.relative_x = mickeyX;    / / TODO! */
-/*                  evt.relative_y = mickeyY;    / / TODO! */
-		    }
-		}
-	    else
-		EVT.oldMove = -1;
-	    if (msg.wParam & MK_LBUTTON)
-		evt.modifiers |= EVT_LEFTBUT;
-	    if (msg.wParam & MK_RBUTTON)
-		evt.modifiers |= EVT_RIGHTBUT;
-	    if (msg.wParam & MK_MBUTTON)
-		evt.modifiers |= EVT_MIDDLEBUT;
-	    if (msg.wParam & MK_SHIFT)
-		evt.modifiers |= EVT_SHIFTKEY;
-	    if (msg.wParam & MK_CONTROL)
-		evt.modifiers |= EVT_CTRLSTATE;
-	    }
-
-	/* Convert keyboard codes */
-	TranslateMessage(&msg);
-	if (evt.what & EVT_KEYEVT) {
-	    int scanCode = (msg.lParam >> 16) & 0xFF;
-	    if (evt.what == EVT_KEYUP) {
-		/* Get message for keyup code from table of cached down values */
-		evt.message = keyUpMsg[scanCode];
-		keyUpMsg[scanCode] = 0;
-		}
-	    else {
-		if (PeekMessage(&charMsg,NULL,WM_CHAR,WM_CHAR,PM_REMOVE))
-		    evt.message = charMsg.wParam;
-		if (PeekMessage(&charMsg,NULL,WM_SYSCHAR,WM_SYSCHAR,PM_REMOVE))
-		    evt.message = charMsg.wParam;
-		evt.message |= ((msg.lParam >> 8) & 0xFF00);
-		keyUpMsg[scanCode] = (ushort)evt.message;
-		}
-	    if (evt.what == EVT_KEYREPEAT)
-		evt.message |= (msg.lParam << 16);
-	    if (HIWORD(msg.lParam) & KF_ALTDOWN)
-		evt.modifiers |= EVT_ALTSTATE;
-	    if (GetKeyState(VK_SHIFT) & 0x8000U)
-		evt.modifiers |= EVT_SHIFTKEY;
-	    if (GetKeyState(VK_CONTROL) & 0x8000U)
-		evt.modifiers |= EVT_CTRLSTATE;
-	    EVT.oldMove = -1;
-	    }
-
-	if (evt.what != 0) {
-	    /* Add time stamp and add the event to the queue */
-	    evt.when = msg.time;
-	    if (EVT.count < EVENTQSIZE)
-		addEvent(&evt);
-	    }
-	DispatchMessage(&msg);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
-    int signal)
-{
-    (void)signal;
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
-    _EVT_mouseMoveHandler mouseMove)
-{
-    /* Initialise the event queue */
-    EVT.mouseMove = mouseMove;
-    initEventQueue();
-    memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-    /* Catch program termination signals so we can clean up properly */
-    signal(SIGABRT, _EVT_abort);
-    signal(SIGFPE, _EVT_abort);
-    signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
-    int *x,
-    int *y)
-{
-    /* Scale coordinates up to desktop coordinates first */
-    int scaledX = (*x * _PM_deskX) / rangeX;
-    int scaledY = (*y * _PM_deskY) / rangeY;
-
-    /* Scale coordinates back to screen coordinates again */
-    *x = (scaledX * rangeX) / _PM_deskX;
-    *y = (scaledY * rangeY) / _PM_deskY;
-    SetCursorPos(scaledX,scaledY);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
-    /* TODO: Implement joystick code based on DirectX! */
-    return 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note:   Most analogue joysticks will provide readings that change even
-	though the joystick has not moved. Hence if you call this routine
-	you will likely get an EVT_JOYMOVE event every time through your
-	event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c
deleted file mode 100644
index 59d9aa0c7c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/****************************************************************************
-*
-*                         SciTech Display Doctor
-*
-*               Copyright (C) 1991-2001 SciTech Software, Inc.
-*                            All rights reserved.
-*
-*  ======================================================================
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  |                                                                    |
-*  |This copyrighted computer code is a proprietary trade secret of     |
-*  |SciTech Software, Inc., located at 505 Wall Street, Chico, CA 95928 |
-*  |USA (www.scitechsoft.com).  ANY UNAUTHORIZED POSSESSION, USE,       |
-*  |VIEWING, COPYING, MODIFICATION OR DISSEMINATION OF THIS CODE IS     |
-*  |STRICTLY PROHIBITED BY LAW.  Unless you have current, express       |
-*  |written authorization from SciTech to possess or use this code, you |
-*  |may be subject to civil and/or criminal penalties.                  |
-*  |                                                                    |
-*  |If you received this code in error or you would like to report      |
-*  |improper use, please immediately contact SciTech Software, Inc. at  |
-*  |530-894-8400.                                                       |
-*  |                                                                    |
-*  |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-*  ======================================================================
-*
-* Language:     ANSI C
-* Environment:  Windows NT, Windows 2K or Windows XP.
-*
-* Description:  Main module to do the installation of the SDD and GLDirect
-*               device driver components under Windows NT/2K/XP.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "win32/oshdr.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-szDriverName    - Actual name of the driver to install in the system
-szServiceName   - Name of the service to create
-szLoadGroup     - Load group for the driver (NULL for normal drivers)
-dwServiceType   - Service type to create
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function does all the work to install the driver into the system.
-The driver is not however activated; for that you must use the Start_SddFilt
-function.
-****************************************************************************/
-ulong PMAPI PM_installService(
-    const char *szDriverName,
-    const char *szServiceName,
-    const char *szLoadGroup,
-    ulong dwServiceType)
-{
-    SC_HANDLE   scmHandle;
-    SC_HANDLE   driverHandle;
-    char        szDriverPath[MAX_PATH];
-    HKEY        key;
-    char        keyPath[MAX_PATH];
-    ulong       status;
-
-    /* Obtain a handle to the service control manager requesting all access */
-    if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
-	return GetLastError();
-
-    /* Find the path to the driver in system directory */
-    GetSystemDirectory(szDriverPath, sizeof(szDriverPath));
-    strcat(szDriverPath, "\\drivers\\");
-    strcat(szDriverPath, szDriverName);
-
-    /* Create the service with the Service Control Manager. */
-    driverHandle = CreateService(scmHandle,
-				 szServiceName,
-				 szServiceName,
-				 SERVICE_ALL_ACCESS,
-				 dwServiceType,
-				 SERVICE_BOOT_START,
-				 SERVICE_ERROR_NORMAL,
-				 szDriverPath,
-				 szLoadGroup,
-				 NULL,
-				 NULL,
-				 NULL,
-				 NULL);
-
-    /* Check to see if the driver could actually be installed. */
-    if (!driverHandle) {
-	status = GetLastError();
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Get a handle to the key for driver so that it can be altered in the */
-    /* next step. */
-    strcpy(keyPath, "SYSTEM\\CurrentControlSet\\Services\\");
-    strcat(keyPath, szServiceName);
-    if ((status = RegOpenKeyEx(HKEY_LOCAL_MACHINE,keyPath,0,KEY_ALL_ACCESS,&key)) != ERROR_SUCCESS) {
-	/* A problem has occured. Delete the service so that it is not installed. */
-	status = GetLastError();
-	DeleteService(driverHandle);
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Delete the ImagePath value in the newly created key so that the */
-    /* system looks for the driver in the normal location. */
-    if ((status = RegDeleteValue(key, "ImagePath")) != ERROR_SUCCESS) {
-	/* A problem has occurred. Delete the service so that it is not */
-	/* installed and will not try to start. */
-	RegCloseKey(key);
-	DeleteService(driverHandle);
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Clean up and exit */
-    RegCloseKey(key);
-    CloseServiceHandle(driverHandle);
-    CloseServiceHandle(scmHandle);
-    return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName   - Name of the service to start
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to start the specified service and make it active.
-****************************************************************************/
-ulong PMAPI PM_startService(
-    const char *szServiceName)
-{
-    SC_HANDLE       scmHandle;
-    SC_HANDLE       driverHandle;
-    SERVICE_STATUS	serviceStatus;
-    ulong           status;
-
-    /* Obtain a handle to the service control manager requesting all access */
-    if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
-	return GetLastError();
-
-    /* Open the service with the Service Control Manager. */
-    if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
-	status = GetLastError();
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Start the service */
-    if (!StartService(driverHandle,0,NULL)) {
-	status = GetLastError();
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Query the service to make sure it is there */
-    if (!QueryServiceStatus(driverHandle,&serviceStatus)) {
-	status = GetLastError();
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-    CloseServiceHandle(driverHandle);
-    CloseServiceHandle(scmHandle);
-    return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName   - Name of the service to stop
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to stop the specified service and disable it.
-****************************************************************************/
-ulong PMAPI PM_stopService(
-    const char *szServiceName)
-{
-    SC_HANDLE       scmHandle;
-    SC_HANDLE       driverHandle;
-    SERVICE_STATUS	serviceStatus;
-    ulong           status;
-
-    /* Obtain a handle to the service control manager requesting all access */
-    if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
-	return GetLastError();
-
-    /* Open the service with the Service Control Manager. */
-    if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
-	status = GetLastError();
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Stop the service from running */
-    if (!ControlService(driverHandle, SERVICE_CONTROL_STOP, &serviceStatus)) {
-	status = GetLastError();
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-    CloseServiceHandle(driverHandle);
-    CloseServiceHandle(scmHandle);
-    return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName   - Name of the service to remove
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to remove a service completely from the system.
-****************************************************************************/
-ulong PMAPI PM_removeService(
-    const char *szServiceName)
-{
-    SC_HANDLE   scmHandle;
-    SC_HANDLE   driverHandle;
-    ulong       status;
-
-    /* Obtain a handle to the service control manager requesting all access */
-    if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
-	return GetLastError();
-
-    /* Open the service with the Service Control Manager. */
-    if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
-	status = GetLastError();
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-
-    /* Remove the service */
-    if (!DeleteService(driverHandle)) {
-	status = GetLastError();
-	CloseServiceHandle(driverHandle);
-	CloseServiceHandle(scmHandle);
-	return status;
-	}
-    CloseServiceHandle(driverHandle);
-    CloseServiceHandle(scmHandle);
-    return ERROR_SUCCESS;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h
deleted file mode 100644
index 0c59e9006f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#include <float.h>
-#define NONAMELESSUNION
-#include "pm/ddraw.h"
-
-/* Macros to save and restore the default control word. Windows 9x has
- * some bugs in it such that calls to load any DLL's which load 16-bit
- * DLL's cause the floating point control word to get trashed. We fix
- * this by saving and restoring the control word across problematic
- * calls.
- */
-
-#if defined(__INTEL__)
-#define GET_DEFAULT_CW()                    \
-{                                           \
-    if (_PM_cw_default == 0)                \
-	_PM_cw_default = _control87(0,0);   \
-}
-#define RESET_DEFAULT_CW()                  \
-    _control87(_PM_cw_default,0xFFFFFFFF)
-#else
-#define GET_DEFAULT_CW()
-#define RESET_DEFAULT_CW()
-#endif
-
-/* Custom window messages */
-
-#define	WM_DO_SUSPEND_APP			WM_USER
-#define	WM_PM_LEAVE_FULLSCREEN	    0
-#define	WM_PM_RESTORE_FULLSCREEN	1
-
-/* Macro for disabling AutoPlay on a use system */
-
-#define AUTOPLAY_DRIVE_CDROM    0x20
-
-/*--------------------------- Global Variables ----------------------------*/
-
-#ifdef  __INTEL__
-extern uint     _PM_cw_default;         /* Default FPU control word     */
-#endif
-extern int      _PM_deskX,_PM_deskY;    /* Desktop dimensions           */
-extern HWND     _PM_hwndConsole;        /* Window handle for console    */
-
-/*-------------------------- Internal Functions ---------------------------*/
-
-void _EVT_pumpMessages(void);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c b/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c
deleted file mode 100644
index 1ffdbccabc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c
+++ /dev/null
@@ -1,1459 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  Implementation for the OS Portability Manager Library, which
-*               contains functions to implement OS specific services in a
-*               generic, cross platform API. Porting the OS Portability
-*               Manager library is the first step to porting any SciTech
-*               products to a new platform.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <direct.h>
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "pm_help.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool           _PM_haveWinNT;      /* True if we are running on NT     */
-static uint     VESABuf_len = 1024; /* Length of the VESABuf buffer     */
-static void     *VESABuf_ptr = NULL;/* Near pointer to VESABuf          */
-static uint     VESABuf_rseg;       /* Real mode segment of VESABuf     */
-static uint     VESABuf_roff;       /* Real mode offset of VESABuf      */
-HANDLE          _PM_hDevice = NULL; /* Handle to Win32 VxD              */
-static ibool    inited = false;     /* Flags if we are initialised      */
-static void     (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-static char *szMachineNameKey   = "System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineNameKeyNT = "System\\CurrentControlSet\\control\\ComputerName\\ActiveComputerName";
-static char *szMachineName      = "ComputerName";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Macro to check for a valid, loaded version of PMHELP. We check this
- * on demand when we need these services rather than when PM_init() is
- * called because if we are running on DirectDraw we don't need PMHELP.VXD.
- */
-
-#define CHECK_FOR_PMHELP()                                                  \
-{                                                                           \
-    if (_PM_hDevice == INVALID_HANDLE_VALUE)                                \
-	if (_PM_haveWinNT)                                                  \
-	    PM_fatalError("Unable to connect to PMHELP.SYS or SDDHELP.SYS!"); \
-	else                                                                  \
-	    PM_fatalError("Unable to connect to PMHELP.VXD or SDDHELP.VXD!"); \
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library and connect to our helper device driver. If we
-cannot connect to our helper device driver, we bail out with an error
-message. Our Windows 9x VxD is dynamically loadable, so it can be loaded
-after the system has started.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-    DWORD   inBuf[1];   /* Buffer to receive data from VxD  */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-    char    cntPath[PM_MAX_PATH];
-    char    *env;
-
-    /* Create a file handle for the static VxD if possible, otherwise
-     * dynamically load the PMHELP helper VxD. Note that if an old version
-     * of SDD is loaded, we use the PMHELP VxD instead.
-     */
-    if (!inited) {
-	/* Determine if we are running under Windows NT or not and
-	 * set the global OS type variable.
-	 */
-	_PM_haveWinNT = false;
-	if ((GetVersion() & 0x80000000UL) == 0)
-	    _PM_haveWinNT = true;
-	___drv_os_type = (_PM_haveWinNT) ? _OS_WINNT : _OS_WIN95;
-
-	/* Now try to connect to SDDHELP.VXD or SDDHELP.SYS */
-	_PM_hDevice = CreateFile(SDDHELP_MODULE_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
-	if (_PM_hDevice != INVALID_HANDLE_VALUE) {
-	    if (!DeviceIoControl(_PM_hDevice, PMHELP_GETVER32, NULL, 0,
-		    outBuf, sizeof(outBuf), &count, NULL) || outBuf[0] < PMHELP_VERSION) {
-		/* Old version of SDDHELP loaded, so use PMHELP instead */
-		CloseHandle(_PM_hDevice);
-		_PM_hDevice = INVALID_HANDLE_VALUE;
-		}
-	    }
-	if (_PM_hDevice == INVALID_HANDLE_VALUE) {
-	    /* First try to see if there is a currently loaded PMHELP driver.
-	     * This is usually the case when we are running under Windows NT/2K.
-	     */
-	    _PM_hDevice = CreateFile(PMHELP_MODULE_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
-	    if (_PM_hDevice == INVALID_HANDLE_VALUE) {
-		/* The driver was not staticly loaded, so try creating a file handle
-		 * to a dynamic version of the VxD if possible. Note that on WinNT/2K we
-		 * cannot support dynamically loading the drivers.
-		 */
-		_PM_hDevice = CreateFile(PMHELP_VXD_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
-		}
-	    }
-	if (_PM_hDevice != INVALID_HANDLE_VALUE) {
-	    /* Call the driver to determine the version number */
-	    if (!DeviceIoControl(_PM_hDevice, PMHELP_GETVER32, inBuf, sizeof(inBuf),
-		    outBuf, sizeof(outBuf), &count, NULL) || outBuf[0] < PMHELP_VERSION) {
-		if (_PM_haveWinNT)
-		    PM_fatalError("Older version of PMHELP.SYS found!");
-		else
-		    PM_fatalError("Older version of PMHELP.VXD found!");
-		}
-
-	    /* Now set the current path inside the VxD so it knows what the
-	     * current directory is for loading Nucleus drivers.
-	     */
-	    inBuf[0] = (ulong)PM_getCurrentPath(cntPath,sizeof(cntPath));
-	    if (!DeviceIoControl(_PM_hDevice, PMHELP_SETCNTPATH32, inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &count, NULL))
-		PM_fatalError("Unable to set VxD current path!");
-
-	    /* Now pass down the NUCLEUS_PATH environment variable to the device
-	     * driver so it can use this value if it is found.
-	     */
-	    if ((env = getenv("NUCLEUS_PATH")) != NULL) {
-		inBuf[0] = (ulong)env;
-		if (!DeviceIoControl(_PM_hDevice, PMHELP_SETNUCLEUSPATH32, inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &count, NULL))
-		    PM_fatalError("Unable to set VxD Nucleus path!");
-		}
-
-	    /* Enable IOPL for ring-3 code by default if driver is present */
-	    if (_PM_haveWinNT)
-		PM_setIOPL(3);
-	    }
-
-	/* Indicate that we have been initialised */
-	inited = true;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-We do have BIOS access under Windows 9x, but not under Windows NT.
-****************************************************************************/
-int PMAPI PM_setIOPL(
-    int iopl)
-{
-    DWORD       inBuf[1];   /* Buffer to receive data from VxD  */
-    DWORD       outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD       count;      /* Count of bytes returned from VxD */
-    static int  cntIOPL = 0;
-    int         oldIOPL = cntIOPL;
-
-    /* Enable I/O by adjusting the I/O permissions map on Windows NT */
-    if (_PM_haveWinNT) {
-	CHECK_FOR_PMHELP();
-	if (iopl == 3)
-	    DeviceIoControl(_PM_hDevice, PMHELP_ENABLERING3IOPL, inBuf, sizeof(inBuf),outBuf, sizeof(outBuf), &count, NULL);
-	else
-	    DeviceIoControl(_PM_hDevice, PMHELP_DISABLERING3IOPL, inBuf, sizeof(inBuf),outBuf, sizeof(outBuf), &count, NULL);
-	cntIOPL = iopl;
-	return oldIOPL;
-	}
-
-    /* We always have IOPL on Windows 9x */
-    return 3;
-}
-
-/****************************************************************************
-REMARKS:
-We do have BIOS access under Windows 9x, but not under Windows NT.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
-    if (PM_getOSType() == _OS_WINNT)
-	return false;
-    else
-	return _PM_hDevice != INVALID_HANDLE_VALUE;
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
-    if ((GetVersion() & 0x80000000UL) == 0)
-	return ___drv_os_type = _OS_WINNT;
-    else
-	return ___drv_os_type = _OS_WIN95;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
-    return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
-    char *s)
-{
-    uint pos = strlen(s);
-    if (s[pos-1] != '\\') {
-	s[pos] = '\\';
-	s[pos+1] = '\0';
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
-    void (PMAPIP cleanup)(void))
-{
-    fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
-    const char *msg)
-{
-    if (fatalErrorCleanup)
-	fatalErrorCleanup();
-    MessageBox(NULL,msg,"Fatal Error!", MB_ICONEXCLAMATION);
-    exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
-    uint *len,
-    uint *rseg,
-    uint *roff)
-{
-    DWORD   outBuf[4];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    /* We require the helper VxD to be loaded staticly in order to support
-     * the VESA transfer buffer. We do not support dynamically allocating
-     * real mode memory buffers from Win32 programs (we need a 16-bit DLL
-     * for this, and Windows 9x becomes very unstable if you free the
-     * memory blocks out of order).
-     */
-    if (!inited)
-	PM_init();
-    if (!VESABuf_ptr) {
-	CHECK_FOR_PMHELP();
-	if (DeviceIoControl(_PM_hDevice, PMHELP_GETVESABUF32, NULL, 0,
-		outBuf, sizeof(outBuf), &count, NULL)) {
-	    if (!outBuf[0])
-		return NULL;
-	    VESABuf_ptr = (void*)outBuf[0];
-	    VESABuf_len = outBuf[1];
-	    VESABuf_rseg = outBuf[2];
-	    VESABuf_roff = outBuf[3];
-	    }
-	}
-    *len = VESABuf_len;
-    *rseg = VESABuf_rseg;
-    *roff = VESABuf_roff;
-    return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
-    /* Not used in Windows */
-    return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
-    /* Not used in Windows */
-    return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
-    int x,
-    int y)
-{
-    /* Nothing to do for Windows */
-    (void)x;
-    (void)y;
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
-    int width,
-    int height)
-{
-    /* Nothing to do for Windows */
-    (void)width;
-    (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
-    PM_intHandler ih,
-    int frequency)
-{
-    /* We do not support this from Win32 programs. Rather the VxD handles
-     * this stuff it will take care of hooking the stereo flip functions at
-     * the VxD level.
-     */
-    (void)ih;
-    (void)frequency;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
-    int frequency)
-{
-    /* Not supported under Win32 */
-    (void)frequency;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
-    /* Not supported under Win32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
-    char *path,
-    int maxLen)
-{
-    return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Query a string from the registry (extended version).
-****************************************************************************/
-static ibool REG_queryStringEx(
-    HKEY hKey,
-    const char *szValue,
-    char *value,
-    ulong size)
-{
-    DWORD   type;
-
-    if (RegQueryValueEx(hKey,(PCHAR)szValue,(PDWORD)NULL,(PDWORD)&type,(LPBYTE)value,(PDWORD)&size) == ERROR_SUCCESS)
-	return true;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Query a string from the registry.
-****************************************************************************/
-static ibool REG_queryString(
-    const char *szKey,
-    const char *szValue,
-    char *value,
-    DWORD size)
-{
-    HKEY    hKey;
-    ibool   status = false;
-
-    memset(value,0,sizeof(value));
-    if (RegOpenKey(HKEY_LOCAL_MACHINE,szKey,&hKey) == ERROR_SUCCESS) {
-	status = REG_queryStringEx(hKey,szValue,value,size);
-	RegCloseKey(hKey);
-	}
-    return status;
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
-    static char path[256];
-    GetSystemDirectory(path,sizeof(path));
-    return path[0];
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
-    return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
-    static char path[256];
-    char        *env;
-
-    if ((env = getenv("NUCLEUS_PATH")) != NULL)
-	return env;
-    GetSystemDirectory(path,sizeof(path));
-    strcat(path,"\\nucleus");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
-    static char path[256];
-    strcpy(path,PM_getNucleusPath());
-    PM_backslash(path);
-    strcat(path,"config");
-    return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
-    return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
-    static char name[256];
-
-    if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
-	return name;
-    if (REG_queryString(szMachineNameKeyNT,szMachineName,name,sizeof(name)))
-	return name;
-    return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
-    if (_PM_haveWinNT) {
-	/* On Windows NT we have to map it physically directly */
-	    return PM_mapPhysicalAddr(0x400, 0x1000, true);
-	}
-    else {
-	/* For Windows 9x we can access this memory directly */
-	return (void*)0x400;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
-    if (_PM_haveWinNT) {
-	/* On Windows NT we have to map it physically directly */
-	    return PM_mapPhysicalAddr(0xA0000, 0x0FFFF, false);
-	}
-    else {
-	/* Always use the 0xA0000 linear address so that we will use
-	 * whatever page table mappings are set up for us (ie: for virtual
-	 * bank switching.
-	 */
-	return (void*)0xA0000;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
-    ulong base,
-    ulong limit,
-    ibool isCached)
-{
-    DWORD   inBuf[3];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = base;
-    inBuf[1] = limit;
-    inBuf[2] = isCached;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_MAPPHYS32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return (void*)outBuf[0];
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
-    void *ptr,
-    ulong limit)
-{
-    /* We never free the mappings under Win32 (the VxD tracks them and
-     * reissues the same mappings until the system is rebooted).
-     */
-    (void)ptr;
-    (void)limit;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
-    void *p)
-{
-    DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = (ulong)p;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_GETPHYSICALADDR32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0xFFFFFFFFUL;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
-    void *p,
-    ulong length,
-    ulong *physAddress)
-{
-    DWORD   inBuf[3];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = (ulong)p;
-    inBuf[1] = (ulong)length;
-    inBuf[2] = (ulong)physAddress;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_GETPHYSICALADDRRANGE32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
-    ulong milliseconds)
-{
-    Sleep(milliseconds);
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3F8;
-	case 1: return 0x2F8;
-	case 2: return 0x3E8;
-	case 3: return 0x2E8;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(int port)
-{
-    /* TODO: Re-code this to determine real values using the Plug and Play */
-    /*       manager for the OS. */
-    switch (port) {
-	case 0: return 0x3BC;
-	case 1: return 0x378;
-	case 2: return 0x278;
-	}
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
-    long size)
-{
-    DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    inBuf[0] = size;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_MALLOCSHARED32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return (void*)outBuf[0];
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
-    void *ptr)
-{
-    DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-
-    inBuf[0] = (ulong)ptr;
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_FREESHARED32, inBuf, sizeof(inBuf), NULL, 0, NULL, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
-    void *base,
-    ulong limit)
-{
-    (void)base;
-    (void)limit;
-    return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
-    uint r_seg,
-    uint r_off)
-{
-    return (void*)(MK_PHYS(r_seg,r_off));
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
-    uint size,
-    uint *r_seg,
-    uint *r_off)
-{
-    /* We do not support dynamically allocating real mode memory buffers
-     * from Win32 programs (we need a 16-bit DLL for this, and Windows
-     * 9x becomes very unstable if you free the memory blocks out of order).
-     */
-    (void)size;
-    (void)r_seg;
-    (void)r_off;
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
-    void *mem)
-{
-    /* Not supported in Windows */
-    (void)mem;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
-    int intno,
-    DPMI_regs *regs)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = intno;
-    inBuf[1] = (ulong)regs;
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_DPMIINT8632, inBuf, sizeof(inBuf),
-	NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
-    int intno,
-    RMREGS *in,
-    RMREGS *out)
-{
-    DWORD   inBuf[3];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = intno;
-    inBuf[1] = (ulong)in;
-    inBuf[2] = (ulong)out;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_INT8632, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
-    int intno,
-    RMREGS *in,
-    RMREGS *out,
-    RMSREGS *sregs)
-{
-    DWORD   inBuf[4];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = intno;
-    inBuf[1] = (ulong)in;
-    inBuf[2] = (ulong)out;
-    inBuf[3] = (ulong)sregs;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_INT86X32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
-    uint seg,
-    uint off,
-    RMREGS *in,
-    RMSREGS *sregs)
-{
-    DWORD   inBuf[4];   /* Buffer to send data to VxD       */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = seg;
-    inBuf[1] = off;
-    inBuf[2] = (ulong)in;
-    inBuf[3] = (ulong)sregs;
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_CALLREALMODE32, inBuf, sizeof(inBuf),
-	NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
-    ulong *physical,
-    ulong *total)
-{
-    /* We don't support this under Win32 at the moment */
-    *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
-    uint size,
-    ulong *physAddr,
-    ibool contiguous,
-    ibool below16M)
-{
-    DWORD   inBuf[4];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = size;
-    inBuf[1] = (ulong)physAddr;
-    inBuf[2] = (ulong)contiguous;
-    inBuf[3] = (ulong)below16M;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_ALLOCLOCKED32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return (void*)outBuf[0];
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
-    void *p,
-    uint size,
-    ibool contiguous)
-{
-    DWORD   inBuf[3];   /* Buffer to send data to VxD       */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = (ulong)p;
-    inBuf[1] = size;
-    inBuf[2] = contiguous;
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_FREELOCKED32, inBuf, sizeof(inBuf),
-	NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
-    ibool locked)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = locked;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_ALLOCPAGE32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return (void*)outBuf[0];
-    return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
-    void *p)
-{
-    DWORD   inBuf[1];   /* Buffer to send data to VxD       */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = (ulong)p;
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_FREEPAGE32, inBuf, sizeof(inBuf),
-	NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    inBuf[0] = (ulong)p;
-    inBuf[1] = len;
-    inBuf[2] = (ulong)lh;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_LOCKDATAPAGES32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    inBuf[0] = (ulong)p;
-    inBuf[1] = len;
-    inBuf[2] = (ulong)lh;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_UNLOCKDATAPAGES32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    inBuf[0] = (ulong)p;
-    inBuf[1] = len;
-    inBuf[2] = (ulong)lh;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_LOCKCODEPAGES32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
-    DWORD   inBuf[2];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    inBuf[0] = (ulong)p;
-    inBuf[1] = len;
-    inBuf[2] = (ulong)lh;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_UNLOCKCODEPAGES32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
-    int bank)
-{
-    RMREGS  regs;
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0000;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
-    int bank)
-{
-    RMREGS  regs;
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0000;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-    regs.x.ax = 0x4F05;
-    regs.x.bx = 0x0001;
-    regs.x.dx = bank;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
-    int x,
-    int y,
-    int waitVRT)
-{
-    RMREGS  regs;
-    regs.x.ax = 0x4F07;
-    regs.x.bx = waitVRT;
-    regs.x.cx = x;
-    regs.x.dx = y;
-    PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Enable write combining for the memory region.
-****************************************************************************/
-ibool PMAPI PM_enableWriteCombine(
-    ulong base,
-    ulong length,
-    uint type)
-{
-    DWORD   inBuf[3];   /* Buffer to send data to VxD       */
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    if (!inited)
-	PM_init();
-    inBuf[0] = base;
-    inBuf[1] = length;
-    inBuf[2] = type;
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_ENABLELFBCOMB32, inBuf, sizeof(inBuf),
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Get the page directory base register value
-****************************************************************************/
-ulong PMAPI _PM_getPDB(void)
-{
-    DWORD   outBuf[1];  /* Buffer to receive data from VxD  */
-    DWORD   count;      /* Count of bytes returned from VxD */
-
-    CHECK_FOR_PMHELP();
-    if (DeviceIoControl(_PM_hDevice, PMHELP_GETPDB32, NULL, 0,
-	    outBuf, sizeof(outBuf), &count, NULL))
-	return outBuf[0];
-    return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
-    CHECK_FOR_PMHELP();
-    DeviceIoControl(_PM_hDevice, PMHELP_FLUSHTLB32, NULL, 0, NULL, 0, NULL, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
-    ushort axVal,
-    ulong BIOSPhysAddr,
-    void *mappedBIOS,
-    ulong BIOSLen)
-{
-    /* This is never done by Win32 programs, but rather done by the VxD
-     * when the system boots.
-     */
-    (void)axVal;
-    (void)BIOSPhysAddr;
-    (void)mappedBIOS;
-    (void)BIOSLen;
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Load an OS specific shared library or DLL. If the OS does not support
-shared libraries, simply return NULL.
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
-    const char *szDLLName)
-{
-    return (PM_MODULE)LoadLibrary(szDLLName);
-}
-
-/****************************************************************************
-REMARKS:
-Get the address of a named procedure from a shared library.
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
-    PM_MODULE hModule,
-    const char *szProcName)
-{
-    return (void*)GetProcAddress((HINSTANCE)hModule,szProcName);
-}
-
-/****************************************************************************
-REMARKS:
-Unload a shared library.
-****************************************************************************/
-void PMAPI PM_freeLibrary(
-    PM_MODULE hModule)
-{
-    FreeLibrary((HINSTANCE)hModule);
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
-    PM_findData *findData,
-    WIN32_FIND_DATA *blk)
-{
-    ulong   dwSize = findData->dwSize;
-
-    memset(findData,0,findData->dwSize);
-    findData->dwSize = dwSize;
-    if (blk->dwFileAttributes & FILE_ATTRIBUTE_READONLY)
-	findData->attrib |= PM_FILE_READONLY;
-    if (blk->dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
-	findData->attrib |= PM_FILE_DIRECTORY;
-    if (blk->dwFileAttributes & FILE_ATTRIBUTE_ARCHIVE)
-	findData->attrib |= PM_FILE_ARCHIVE;
-    if (blk->dwFileAttributes & FILE_ATTRIBUTE_HIDDEN)
-	findData->attrib |= PM_FILE_HIDDEN;
-    if (blk->dwFileAttributes & FILE_ATTRIBUTE_SYSTEM)
-	findData->attrib |= PM_FILE_SYSTEM;
-    findData->sizeLo = blk->nFileSizeLow;
-    findData->sizeHi = blk->nFileSizeHigh;
-    strncpy(findData->name,blk->cFileName,PM_MAX_PATH);
-    findData->name[PM_MAX_PATH-1] = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
-    const char *filename,
-    PM_findData *findData)
-{
-    WIN32_FIND_DATA blk;
-    HANDLE          hfile;
-
-    if ((hfile = FindFirstFile(filename,&blk)) != INVALID_HANDLE_VALUE) {
-	convertFindData(findData,&blk);
-	return (void*)hfile;
-	}
-    return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
-    void *handle,
-    PM_findData *findData)
-{
-    WIN32_FIND_DATA blk;
-
-    if (FindNextFile((HANDLE)handle,&blk)) {
-	convertFindData(findData,&blk);
-	return true;
-	}
-    return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
-    void *handle)
-{
-    FindClose((HANDLE)handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
-    1   - Drive A:
-    2   - Drive B:
-    3   - Drive C:
-    etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
-    char drive)
-{
-    char    buf[5];
-    int     type;
-
-    sprintf(buf,"%c:\\", drive);
-    return ((type = GetDriveType(buf)) != 0 && type != 1);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
-    int drive,
-    char *dir,
-    int len)
-{
-    /* NT stores the current directory for drive N in the magic environment */
-    /* variable =N: so we simply look for that environment variable. */
-    char envname[4];
-
-    envname[0] = '=';
-    envname[1] = drive - 1 + 'A';
-    envname[2] = ':';
-    envname[3] = '\0';
-    if (GetEnvironmentVariable(envname,dir,len) == 0) {
-	/* The current directory or the drive has not been set yet, so */
-	/* simply set it to the root. */
-	dir[0] = envname[1];
-	dir[1] = ':';
-	dir[2] = '\\';
-	dir[3] = '\0';
-	SetEnvironmentVariable(envname,dir);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
-    const char *filename,
-    uint attrib)
-{
-    DWORD attr = 0;
-
-    if (attrib & PM_FILE_READONLY)
-	attr |= FILE_ATTRIBUTE_READONLY;
-    if (attrib & PM_FILE_ARCHIVE)
-	attr |= FILE_ATTRIBUTE_ARCHIVE;
-    if (attrib & PM_FILE_HIDDEN)
-	attr |= FILE_ATTRIBUTE_HIDDEN;
-    if (attrib & PM_FILE_SYSTEM)
-	attr |= FILE_ATTRIBUTE_SYSTEM;
-    SetFileAttributes((LPSTR)filename, attr);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
-    const char *filename)
-{
-    DWORD   attr = GetFileAttributes(filename);
-    uint    attrib = 0;
-
-    if (attr & FILE_ATTRIBUTE_READONLY)
-	attrib |= PM_FILE_READONLY;
-    if (attr & FILE_ATTRIBUTE_ARCHIVE)
-	attrib |= PM_FILE_ARCHIVE;
-    if (attr & FILE_ATTRIBUTE_HIDDEN)
-	attrib |= PM_FILE_HIDDEN;
-    if (attr & FILE_ATTRIBUTE_SYSTEM)
-	attrib |= PM_FILE_SYSTEM;
-    return attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
-    const char *filename)
-{
-    return CreateDirectory(filename,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
-    const char *filename)
-{
-    return RemoveDirectory(filename);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    HFILE       f;
-    OFSTRUCT    of;
-    FILETIME    utcTime,localTime;
-    SYSTEMTIME  sysTime;
-    ibool       status = false;
-
-    of.cBytes = sizeof(of);
-    if ((f = OpenFile(filename,&of,OF_READ)) == HFILE_ERROR)
-	return false;
-    if (!GetFileTime((HANDLE)f,NULL,NULL,&utcTime))
-	goto Exit;
-    if (!gmTime) {
-	if (!FileTimeToLocalFileTime(&utcTime,&localTime))
-	    goto Exit;
-	}
-    else
-	localTime = utcTime;
-    if (!FileTimeToSystemTime(&localTime,&sysTime))
-	goto Exit;
-    time->year = sysTime.wYear;
-    time->mon = sysTime.wMonth-1;
-    time->day = sysTime.wYear;
-    time->hour = sysTime.wHour;
-    time->min = sysTime.wMinute;
-    time->sec = sysTime.wSecond;
-    status = true;
-
-Exit:
-    CloseHandle((HANDLE)f);
-    return status;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
-    const char *filename,
-    ibool gmTime,
-    PM_time *time)
-{
-    HFILE       f;
-    OFSTRUCT    of;
-    FILETIME    utcTime,localTime;
-    SYSTEMTIME  sysTime;
-    ibool       status = false;
-
-    of.cBytes = sizeof(of);
-    if ((f = OpenFile(filename,&of,OF_WRITE)) == HFILE_ERROR)
-	return false;
-    sysTime.wYear = time->year;
-    sysTime.wMonth = time->mon+1;
-    sysTime.wYear = time->day;
-    sysTime.wHour = time->hour;
-    sysTime.wMinute = time->min;
-    sysTime.wSecond = time->sec;
-    if (!SystemTimeToFileTime(&sysTime,&localTime))
-	goto Exit;
-    if (!gmTime) {
-	if (!LocalFileTimeToFileTime(&localTime,&utcTime))
-	    goto Exit;
-	}
-    else
-	utcTime = localTime;
-    if (!SetFileTime((HANDLE)f,NULL,NULL,&utcTime))
-	goto Exit;
-    status = true;
-
-Exit:
-    CloseHandle((HANDLE)f);
-    return status;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c
deleted file mode 100644
index 70491cdb80..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
-    return false;
-}
-
-void * PMAPI VF_init(
-    ulong baseAddr,
-    int bankSize,
-    int codeLen,
-    void *bankFunc)
-{
-    (void)baseAddr;
-    (void)bankSize;
-    (void)codeLen;
-    (void)bankFunc;
-    return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c
deleted file mode 100644
index 5a901a4422..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-*                         Ultra Long Period Timer
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Win32
-*
-* Description:  OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ibool            havePerformanceCounter;
-static ulong            start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-#ifdef  NO_ASSEMBLER
-    havePerformanceCounter = false;
-#else
-    havePerformanceCounter = QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
-    LZTimerObject *tm)
-{
-    if (havePerformanceCounter)
-	QueryPerformanceCounter((LARGE_INTEGER*)&tm->start);
-    else
-	tm->start.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmLap,tmCount;
-
-    if (havePerformanceCounter) {
-	QueryPerformanceCounter((LARGE_INTEGER*)&tmLap);
-	_CPU_diffTime64(&tm->start,&tmLap,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,countFreq.low);
-	}
-    else {
-	tmLap.low = timeGetTime();
-	return (tmLap.low - tm->start.low) * 1000L;
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
-    LZTimerObject *tm)
-{
-    if (havePerformanceCounter)
-	QueryPerformanceCounter((LARGE_INTEGER*)&tm->end);
-    else
-	tm->end.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
-    LZTimerObject *tm)
-{
-    CPU_largeInteger    tmCount;
-
-    if (havePerformanceCounter) {
-	_CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,countFreq.low);
-	}
-    else
-	return (tm->end.low - tm->start.low) * 1000L;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION     1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/x11/event.c b/board/MAI/bios_emulator/scitech/src/pm/x11/event.c
deleted file mode 100644
index b34bfac22f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/x11/event.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Unix / X11
-*
-* Description:  X11 event queue implementation for the MGL.
-*               This can be used both for windowed and fullscreen (DGA) modes.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort       keyUpMsg[256] = {0};/* Table of key up messages     */
-static int          rangeX,rangeY;      /* Range of mouse coordinates   */
-
-static Display  *_EVT_dpy;
-static Window    _EVT_win;
-
-typedef struct {
-  int keycode;
-  int scancode;
-} xkeymap;
-
-xkeymap xkeymaps[] = {
-  { 9, KB_esc},
-  {24, KB_Q},
-  {25, KB_W},
-  {26, KB_E},
-  {27, KB_R},
-  {28, KB_T},
-  {29, KB_Y},
-  {30, KB_U},
-  {31, KB_I},
-  {32, KB_O},
-  {33, KB_P},
-};
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt()       1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode    - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode)    (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
-  static unsigned starttime = 0;
-  struct timeval t;
-
-  gettimeofday(&t, NULL);
-  if (starttime == 0)
-    starttime = t.tv_sec * 1000 + (t.tv_usec/1000);
-  return ((t.tv_sec * 1000 + (t.tv_usec/1000)) - starttime);
-}
-
-static int getScancode(int keycode)
-{
-  return keycode-8;
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-#ifdef X11_CORE
-static void _EVT_pumpX11Messages(void)
-#else
-static void _EVT_pumpMessages(void)
-#endif
-{
-  /* TODO: The purpose of this function is to read all keyboard and mouse */
-  /*         events from the OS specific event queue, translate them and post */
-  /*         them into the SciTech event queue. */
-  event_t evt;
-  XEvent  ev;
-  static int old_mx = 0, old_my = 0, buts = 0, c;
-  char buf[2];
-
-  while (XPending(_EVT_dpy) && XNextEvent(_EVT_dpy,&ev)) {
-    evt.when = _MGL_getTicks();
-
-    switch(ev.type){
-    case KeyPress:
-      c = getScancode(ev.xkey.keycode);
-      evt.what = EVT_KEYDOWN;
-      evt.message = c << 8;
-      XLookupString(&ev.xkey, buf, 2, NULL, NULL);
-      evt.message |= buf[0];
-      break;
-    case KeyRelease:
-      c = getScancode(ev.xkey.keycode);
-      evt.what = EVT_KEYUP;
-      evt.message = keyUpMsg[c];
-      if(count < EVENTQSIZE)
-	addEvent(&evt);
-      keyUpMsg[c] = 0;
-      repeatKey[c] = 0;
-      break;
-    case ButtonPress:
-      evt.what = EVT_MOUSEDOWN;
-      if(ev.xbutton.button == 1){
-	buts |= EVT_LEFTBUT;
-	evt.message = EVT_LEFTBMASK;
-      }else if(ev.xbutton.button == 2){
-	buts |= EVT_MIDDLEBUT;
-	evt.message = EVT_MIDDLEBMASK;
-      }else if(ev.xbutton.button == 3){
-	buts |= EVT_RIGHTBUT;
-	evt.message = EVT_RIGHTBMASK;
-      }
-      evt.modifiers = modifiers | buts;
-
-      break;
-    case ButtonRelease:
-      evt.what = EVT_MOUSEUP;
-      if(ev.xbutton.button == 1){
-	buts &= ~EVT_LEFTBUT;
-	evt.message = EVT_LEFTBMASK;
-      }else if(ev.xbutton.button == 2){
-	buts &= ~EVT_MIDDLEBUT;
-	evt.message = EVT_MIDDLEBMASK;
-      }else if(ev.xbutton.button == 3){
-	buts &= ~EVT_RIGHTBUT;
-	evt.message = EVT_RIGHTBMASK;
-      }
-      evt.modifiers = modifiers | buts;
-
-      break;
-    case MotionNotify:
-      evt.what = EVT_MOUSEMOVE;
-      evt.where_x = ev.xmotion.x;
-      evt.where_y = ev.xmotion.y;
-      evt.relative_x = evt.where_x - old_mx;
-      evt.relative_y = evt.where_y - old_my;
-      old_mx = evt.where_x;
-      old_my = evt.where_y;
-      break;
-    }
-    if (count < EVENTQSIZE)
-      addEvent(&evt);
-  }
-
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
-    EVT_exit();
-    PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove   - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-#ifdef X11_CORE
-void EVTAPI EVT_initX11(
-#else
-void EVTAPI EVT_init(
-#endif
-    _EVT_mouseMoveHandler mouseMove)
-{
-  int result, i,j,k;
-  XDeviceInfoPtr    list,slist;
-
-  /* Initialise the event queue */
-  _mouseMove = mouseMove;
-  initEventQueue();
-  memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-
-  /* query server for input extensions */
-  result =XQueryExtension(_EVT_dpy,"XInputExtension",&i,&j,&k);
-  if(!result) {
-    fprintf(stderr,"Your server doesn't support XInput Extensions\n");
-    fprintf(stderr,"X11 Joystick disabled\n");
-  }
-  list = XListInputDevices(_EVT_dpy,&result);
-  if (!list) {
-    fprintf(stderr,"No extended input devices found !!\n");
-    fprintf(stderr,"X11 Joystick disabled\n");
-  }
-
-
-  /* Catch program termination signals so we can clean up properly */
-  signal(SIGABRT, _EVT_abort);
-  signal(SIGFPE, _EVT_abort);
-  signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
-    int xRes,
-    int yRes)
-{
-    rangeX = xRes;
-    rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
-    /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-    /* Restore signal handlers */
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGINT, SIG_DFL);
-
-    /* TODO: Do any OS specific cleanup in here */
-}
-
-/****************************************************************************
-REMARKS
-Sets the current X11 display
-****************************************************************************/
-void EVT_setX11Display(Display *dpy, Window win)
-{
-  _EVT_dpy = dpy;
-  _EVT_win = win;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h
deleted file mode 100644
index 45d7451be5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  BeOS
-*
-* Description:  Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <X11/Xlib.h>
-#include <X11/keysym.h>
-#include <time.h>
-#include <signal.h>
-#ifdef USE_OS_JOYSTICK
-#include <X11/extensions/XI.h>
-#include <X11/extensions/XInput.h>
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj b/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj
deleted file mode 100644
index 0c6c80f054..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj
+++ /dev/null
@@ -1,74 +0,0 @@
-[SciTech]

-compiler=wc10- 

-targetos=d32 

-[COMPILER]

-version=5.0b

-MACRO=enable_current_compiler\n

-activeconfig=,getch.exe

-FILTERNAME=Source Files\n

-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n

-FILTERASSOCIATEFILETYPES=0 

-FILTERAPPCOMMAND=\n

-vcsproject=SCC:Perforce SCM://depot

-vcslocalpath=SCC:Perforce SCM:c:\

-compile=concur|capture|:Compile:&Compile,dmake %n.obj

-make=concur|capture|clear|saveall|:Build:&Build,dmake %b

-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake -u %b

-debug=concur|capture|savenone|nochangedir|:Debug:&Debug,wdn %b

-execute=hide|savenone|nochangedir|:Execute:E&xecute,

-user1=hide|nochangedir|:User 1:User 1,

-user2=hide|nochangedir|:User 2:User 2,

-usertool_build_all=concur|capture|clear|savenone|:Build All:Build All,dmake all

-usertool_rebuild_all=concur|capture|clear|savenone|:Rebuild All:Rebuild All,dmake -u all

-usertool_clean_directory=concur|capture|savenone|:Clean Directory:&Clean Directory,dmake cleanexe

-workingdir=.

-includedirs=%(SCITECH)\include;%(PRIVATE)\include

-reffile=

-[FILES]

-tests\altbrk.c

-tests\altcrit.c

-tests\biosptr.c

-tests\block.c

-tests\brk.c

-tests\callreal.c

-tests\checks.c

-tests\cpu.c

-tests\critical.c

-tests\getch.c

-tests\isvesa.c

-tests\key.c

-tests\key15.c

-tests\memtest.c

-tests\mouse.c

-tests\rtc.c

-tests\showpci.c

-tests\tick.c

-tests\timerc.c

-tests\timercpp.cpp

-tests\uswc.c

-tests\vftest.c

-tests\video.c

-[ASSOCIATION]

-[CONFIGURATIONS]

-config=,altbrk.exe

-config=,altcrit.exe

-config=,biosptr.exe

-config=,block.exe

-config=,brk.exe

-config=,callreal.exe

-config=,cpu.exe

-config=,critical.exe

-config=,getch.exe

-config=,isvesa.exe

-config=,key.exe

-config=,key15.exe

-config=,memtest.exe

-config=,mouse.exe

-config=,rtc.exe

-config=,showpci.exe

-config=,tick.exe

-config=,timerc.exe

-config=,timercpp.exe

-config=,uswc.exe

-config=,vftest.exe

-config=,video.exe

diff --git a/board/MAI/bios_emulator/scitech/src/pm/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/ztimer.c
deleted file mode 100644
index 5acf7b1f0c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ztimer.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/****************************************************************************
-*
-*                   SciTech OS Portability Manager Library
-*
-*  ========================================================================
-*
-*    The contents of this file are subject to the SciTech MGL Public
-*    License Version 1.0 (the "License"); you may not use this file
-*    except in compliance with the License. You may obtain a copy of
-*    the License at http://www.scitechsoft.com/mgl-license.txt
-*
-*    Software distributed under the License is distributed on an
-*    "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*    implied. See the License for the specific language governing
-*    rights and limitations under the License.
-*
-*    The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-*    The Initial Developer of the Original Code is SciTech Software, Inc.
-*    All Rights Reserved.
-*
-*  ========================================================================
-*
-* Language:     ANSI C
-* Environment:  Any
-*
-* Description:  Module to implement high precision timing on each OS.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*---------------------------- Global variables ---------------------------*/
-
-static LZTimerObject    LZTimer;
-static ulong            start,finish;
-#ifdef  __INTEL__
-static long             cpuSpeed = -1;
-static ibool            haveRDTSC = false;
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External Intel assembler functions */
-#ifdef  __INTEL__
-/* {secret} */
-void  _ASMAPI _CPU_readTimeStamp(CPU_largeInteger *time);
-/* {secret} */
-ulong _ASMAPI _CPU_diffTime64(CPU_largeInteger *t1,CPU_largeInteger *t2,CPU_largeInteger *t);
-/* {secret} */
-ulong _ASMAPI _CPU_calcMicroSec(CPU_largeInteger *count,ulong freq);
-#endif
-
-#if     defined(__SMX32__)
-#include "smx/ztimer.c"
-#elif   defined(__RTTARGET__)
-#include "rttarget/ztimer.c"
-#elif   defined(__REALDOS__)
-#include "dos/ztimer.c"
-#elif   defined(__NT_DRIVER__)
-#include "ntdrv/ztimer.c"
-#elif   defined(__WIN32_VXD__)
-#include "vxd/ztimer.c"
-#elif   defined(__WINDOWS32__)
-#include "win32/ztimer.c"
-#elif   defined(__OS2_VDD__)
-#include "vdd/ztimer.c"
-#elif   defined(__OS2__)
-#include "os2/ztimer.c"
-#elif   defined(__LINUX__)
-#include "linux/ztimer.c"
-#elif   defined(__QNX__)
-#include "qnx/ztimer.c"
-#elif   defined(__BEOS__)
-#include "beos/ztimer.c"
-#else
-#error  Timer library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Initializes the Zen Timer library (extended)
-
-PARAMETERS:
-accurate    - True of the speed should be measured accurately
-
-HEADER:
-ztimer.h
-
-REMARKS:
-This function initializes the Zen Timer library, and /must/ be called before
-any of the remaining Zen Timer library functions are called. The accurate
-parameter is used to determine whether highly accurate timing should be
-used or not. If high accuracy is needed, more time is spent profiling the
-actual speed of the CPU so that we can obtain highly accurate timing
-results, but the time spent in the initialisation routine will be
-significantly longer (on the order of 5 seconds).
-****************************************************************************/
-void ZAPI ZTimerInitExt(
-    ibool accurate)
-{
-    if (cpuSpeed == -1) {
-	__ZTimerInit();
-#ifdef  __INTEL__
-	cpuSpeed = CPU_getProcessorSpeedInHZ(accurate);
-	haveRDTSC = CPU_haveRDTSC() && (cpuSpeed > 0);
-#endif
-	}
-}
-
-/****************************************************************************
-DESCRIPTION:
-Initializes the Zen Timer library.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-This function initializes the Zen Timer library, and /must/ be called before
-any of the remaining Zen Timer library functions are called.
-****************************************************************************/
-void ZAPI ZTimerInit(void)
-{
-    ZTimerInitExt(false);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm  - Timer object to start timing with
-
-REMARKS:
-Starts the Long Period Zen Timer counting. Once you have started the timer,
-you can stop it with LZTimerOff or you can latch the current count with
-LZTimerLap.
-
-The Long Period Zen Timer uses a number of different high precision timing
-mechanisms to obtain microsecond accurate timings results whenever possible.
-The following different techniques are used depending on the operating
-system, runtime environment and CPU on the target machine. If the target
-system has a Pentium CPU installed which supports the Read Time Stamp
-Counter instruction (RDTSC), the Zen Timer library will use this to
-obtain the maximum timing precision available.
-
-Under 32-bit Windows, if the Pentium RDTSC instruction is not available, we
-first try to use the Win32 QueryPerformanceCounter API, and if that is not
-available we fall back on the timeGetTime API which is always supported.
-
-Under 32-bit DOS, if the Pentium RDTSC instruction is not available, we
-then do all timing using the old style 8253 timer chip. The 8253 timer
-routines provide highly accurate timings results in pure DOS mode, however
-in a DOS box under Windows or other Operating Systems the virtualization
-of the timer can produce inaccurate results.
-
-Note: Because the Long Period Zen Timer stores the results in a 32-bit
-      unsigned integer, you can only time periods of up to 2^32 microseconds,
-      or about 1hr 20mins. For timing longer periods use the Ultra Long
-      Period Zen Timer.
-
-SEE ALSO:
-LZTimerOff, LZTimerLap, LZTimerCount
-****************************************************************************/
-void ZAPI LZTimerOnExt(
-    LZTimerObject *tm)
-{
-#ifdef  __INTEL__
-    if (haveRDTSC) {
-	_CPU_readTimeStamp(&tm->start);
-	}
-    else
-#endif
-	__LZTimerOn(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm  - Timer object to do lap timing with
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Returns the current count that has elapsed since the last call to
-LZTimerOn in microseconds. The time continues to run after this function is
-called so you can call this function repeatedly.
-
-SEE ALSO:
-LZTimerOn, LZTimerOff, LZTimerCount
-****************************************************************************/
-ulong ZAPI LZTimerLapExt(
-    LZTimerObject *tm)
-{
-#ifdef  __INTEL__
-    CPU_largeInteger    tmLap,tmCount;
-
-    if (haveRDTSC) {
-	_CPU_readTimeStamp(&tmLap);
-	_CPU_diffTime64(&tm->start,&tmLap,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,cpuSpeed);
-	}
-    else
-#endif
-	return __LZTimerLap(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm  - Timer object to stop timing with
-
-REMARKS:
-Stops the Long Period Zen Timer counting and latches the count. Once you
-have stopped the timer you can read the count with LZTimerCount. If you need
-highly accurate timing, you should use the on and off functions rather than
-the lap function since the lap function does not subtract the overhead of
-the function calls from the timed count.
-
-SEE ALSO:
-LZTimerOn, LZTimerLap, LZTimerCount
-****************************************************************************/
-void ZAPI LZTimerOffExt(
-    LZTimerObject *tm)
-{
-#ifdef  __INTEL__
-    if (haveRDTSC) {
-	_CPU_readTimeStamp(&tm->end);
-	}
-    else
-#endif
-	__LZTimerOff(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm  - Timer object to compute the elapsed time with.
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Returns the current count that has elapsed between calls to
-LZTimerOn and LZTimerOff in microseconds.
-
-SEE ALSO:
-LZTimerOn, LZTimerOff, LZTimerLap
-****************************************************************************/
-ulong ZAPI LZTimerCountExt(
-    LZTimerObject *tm)
-{
-#ifdef  __INTEL__
-    CPU_largeInteger    tmCount;
-
-    if (haveRDTSC) {
-	_CPU_diffTime64(&tm->start,&tm->end,&tmCount);
-	return _CPU_calcMicroSec(&tmCount,cpuSpeed);
-	}
-    else
-#endif
-	return __LZTimerCount(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Obsolete function. You should use the LZTimerOnExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-void ZAPI LZTimerOn(void)
-{ LZTimerOnExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Obsolete function. You should use the LZTimerLapExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-ulong ZAPI LZTimerLap(void)
-{ return LZTimerLapExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Obsolete function. You should use the LZTimerOffExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-void ZAPI LZTimerOff(void)
-{ LZTimerOffExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Obsolete function. You should use the LZTimerCountExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-ulong ZAPI LZTimerCount(void)
-{ return LZTimerCountExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Ultra Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Starts the Ultra Long Period Zen Timer counting. Once you have started the
-timer, you can stop it with ULZTimerOff or you can latch the current count
-with ULZTimerLap.
-
-The Ultra Long Period Zen Timer uses the available operating system services
-to obtain accurate timings results with as much precision as the operating
-system provides, but with enough granularity to time longer periods of
-time than the Long Period Zen Timer. Note that the resolution of the timer
-ticks is not constant between different platforms, and you should use the
-ULZTimerResolution function to determine the number of seconds in a single
-tick of the timer, and use this to convert the timer counts to seconds.
-
-Under 32-bit Windows, we use the timeGetTime function which provides a
-resolution of 1 millisecond (0.001 of a second). Given that the timer
-count is returned as an unsigned 32-bit integer, this we can time intervals
-that are a maximum of 2^32 milliseconds in length (or about 1,200 hours or
-50 days!).
-
-Under 32-bit DOS, we use the system timer tick which runs at 18.2 times per
-second. Given that the timer count is returned as an unsigned 32-bit integer,
-this we can time intervals that are a maximum of 2^32 * (1/18.2) in length
-(or about 65,550 hours or 2731 days!).
-
-SEE ALSO:
-ULZTimerOff, ULZTimerLap, ULZTimerCount, ULZElapsedTime, ULZReadTime
-****************************************************************************/
-void ZAPI ULZTimerOn(void)
-{ start = __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Ultra Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in resolution counts.
-
-REMARKS:
-Returns the current count that has elapsed since the last call to
-ULZTimerOn in microseconds. The time continues to run after this function is
-called so you can call this function repeatedly.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerOff, ULZTimerCount
-****************************************************************************/
-ulong ZAPI ULZTimerLap(void)
-{ return (__ULZReadTime() - start); }
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Stops the Ultra Long Period Zen Timer counting and latches the count. Once
-you have stopped the timer you can read the count with ULZTimerCount.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerLap, ULZTimerCount
-****************************************************************************/
-void ZAPI ULZTimerOff(void)
-{ finish = __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in resolution counts.
-
-REMARKS:
-Returns the current count that has elapsed between calls to
-ULZTimerOn and ULZTimerOff in resolution counts.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerOff, ULZTimerLap, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZTimerCount(void)
-{ return (finish - start); }
-
-/****************************************************************************
-DESCRIPTION:
-Reads the current time from the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Current timer value in resolution counts.
-
-REMARKS:
-Reads the current Ultra Long Period Zen Timer and returns it’s current
-count. You can use the ULZElapsedTime function to find the elapsed time
-between two timer count readings.
-
-SEE ALSO:
-ULZElapsedTime, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZReadTime(void)
-{ return __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Compute the elapsed time between two timer counts.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-start   - Starting time for elapsed count
-finish  - Ending time for elapsed count
-
-RETURNS:
-Elapsed timer in resolution counts.
-
-REMARKS:
-Returns the elapsed time for the Ultra Long Period Zen Timer in units of the
-timers resolution (1/18th of a second under DOS). This function correctly
-computes the difference even if a midnight boundary has been crossed
-during the timing period.
-
-SEE ALSO:
-ULZReadTime, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZElapsedTime(
-    ulong start,
-    ulong finish)
-{ return __ULZElapsedTime(start,finish); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the resolution of the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-resolution   - Place to store the timer in microseconds per timer count.
-
-REMARKS:
-Returns the resolution of the Ultra Long Period Zen Timer as a 32-bit
-integer value measured in microseconds per timer count.
-
-SEE ALSO:
-ULZReadTime, ULZElapsedTime, ULZTimerCount
-****************************************************************************/
-void ZAPI ULZTimerResolution(
-	ulong *resolution)
-{ *resolution = ULZTIMER_RESOLUTION; }
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h b/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h
deleted file mode 100644
index 77c545aef4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/* $XConsortium: AsmMacros.h /main/13 1996/10/25 11:33:12 kaleb $ */
-/*
- * (c) Copyright 1993,1994 by David Wexelblat <dwex@xfree86.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * DAVID WEXELBLAT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
- * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Except as contained in this notice, the name of David Wexelblat shall not be
- * used in advertising or otherwise to promote the sale, use or other dealings
- * in this Software without prior written authorization from David Wexelblat.
- *
- */
-/*
- * Copyright 1997
- * Digital Equipment Corporation. All rights reserved.
- * This software is furnished under license and may be used and copied only in
- * accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * this software in source and/or binary form. No title or ownership is
- * transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and retain
- *    this copyright notice and list of conditions as they appear in the source
- *    file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of Digital
- *    Equipment Corporation. Neither the "Digital Equipment Corporation" name
- *    nor any trademark or logo of Digital Equipment Corporation may be used
- *    to endorse or promote products derived from this software without the
- *    prior written permission of Digital Equipment Corporation.
- *
- * 3) This software is provided "AS-IS" and any express or implied warranties,
- *    including but not limited to, any implied warranties of merchantability,
- *    fitness for a particular purpose, or non-infringement are disclaimed. In
- *    no event shall DIGITAL be liable for any damages whatsoever, and in
- *    particular, DIGITAL shall not be liable for special, indirect,
- *    consequential, or incidental damages or damages for
- *    lost profits, loss of revenue or loss of use, whether such damages arise
- *    in contract,
- *    negligence, tort, under statute, in equity, at law or otherwise, even if
- *    advised of the possibility of such damage.
- *
- */
-
-/* $XFree86: xc/programs/Xserver/hw/xfree86/SuperProbe/AsmMacros.h,v 3.14 1999/09/25 14:36:58 dawes Exp $ */
-
-#if defined(__GNUC__)
-#if defined(linux) && (defined(__alpha__) || defined(__ia64__))
-#undef inb
-#define inb _inb
-#undef inw
-#define inw _inw
-#undef inl
-#define inl _inl
-#undef outb
-#define outb(p,v) _outb((v),(p))
-#undef outw
-#define outw(p,v) _outw((v),(p))
-#undef outl
-#define outl(p,v) _outl((v),(p))
-#else
-#if defined(__sparc__)
-#ifndef ASI_PL
-#define ASI_PL 0x88
-#endif
-
-static __inline__ void
-outb(port, val)
-unsigned long port;
-char val;
-{
-  __asm__ __volatile__("stba %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ void
-outw(port, val)
-unsigned long port;
-char val;
-{
-  __asm__ __volatile__("stha %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ void
-outl(port, val)
-unsigned long port;
-char val;
-{
-  __asm__ __volatile__("sta %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ unsigned int
-inb(port)
-unsigned long port;
-{
-   unsigned char ret;
-   __asm__ __volatile__("lduba [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
-   return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
-unsigned long port;
-{
-   unsigned char ret;
-   __asm__ __volatile__("lduha [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
-   return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
-unsigned long port;
-{
-   unsigned char ret;
-   __asm__ __volatile__("lda [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
-   return ret;
-}
-#else
-#ifdef __arm32__
-unsigned int IOPortBase;  /* Memory mapped I/O port area */
-
-static __inline__ void
-outb(port, val)
-     short port;
-     char val;
-{
-     if ((unsigned short)port >= 0x400) return;
-
-    *(volatile unsigned char*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ void
-outw(port, val)
-     short port;
-     short val;
-{
-     if ((unsigned short)port >= 0x400) return;
-
-    *(volatile unsigned short*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ void
-outl(port, val)
-     short port;
-     int val;
-{
-     if ((unsigned short)port >= 0x400) return;
-
-    *(volatile unsigned long*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ unsigned int
-inb(port)
-     short port;
-{
-     if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
-    return(*(volatile unsigned char*)(((unsigned short)(port))+IOPortBase));
-}
-
-static __inline__ unsigned int
-inw(port)
-     short port;
-{
-     if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
-    return(*(volatile unsigned short*)(((unsigned short)(port))+IOPortBase));
-}
-
-static __inline__ unsigned int
-inl(port)
-     short port;
-{
-     if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
-    return(*(volatile unsigned long*)(((unsigned short)(port))+IOPortBase));
-}
-#else /* __arm32__ */
-#if defined(Lynx) && defined(__powerpc__)
-extern unsigned char *ioBase;
-
-static volatile void
-eieio()
-{
-    __asm__ __volatile__ ("eieio");
-}
-
-static void
-outb(port, value)
-short port;
-unsigned char value;
-{
-    *(uchar *)(ioBase + port) = value; eieio();
-}
-
-static void
-outw(port, value)
-short port;
-unsigned short value;
-{
-    *(unsigned short *)(ioBase + port) = value; eieio();
-}
-
-static void
-outl(port, value)
-short port;
-unsigned long value;
-{
-    *(unsigned long *)(ioBase + port) = value; eieio();
-}
-
-static unsigned char
-inb(port)
-short port;
-{
-    unsigned char val;
-
-    val = *((unsigned char *)(ioBase + port)); eieio();
-    return(val);
-}
-
-static unsigned short
-inw(port)
-short port;
-{
-    unsigned short val;
-
-    val = *((unsigned short *)(ioBase + port)); eieio();
-    return(val);
-}
-
-static unsigned long
-inl(port)
-short port;
-{
-    unsigned long val;
-
-    val = *((unsigned long *)(ioBase + port)); eieio();
-    return(val);
-}
-
-#else
-#if defined(__FreeBSD__) && defined(__alpha__)
-
-#include <sys/types.h>
-
-extern void outb(u_int32_t port, u_int8_t val);
-extern void outw(u_int32_t port, u_int16_t val);
-extern void outl(u_int32_t port, u_int32_t val);
-extern u_int8_t inb(u_int32_t port);
-extern u_int16_t inw(u_int32_t port);
-extern u_int32_t inl(u_int32_t port);
-
-#else
-#ifdef GCCUSESGAS
-static __inline__ void
-outb(port, val)
-short port;
-char val;
-{
-   __asm__ __volatile__("outb %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outw(port, val)
-short port;
-short val;
-{
-   __asm__ __volatile__("outw %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outl(port, val)
-short port;
-unsigned int val;
-{
-   __asm__ __volatile__("outl %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ unsigned int
-inb(port)
-short port;
-{
-   unsigned char ret;
-   __asm__ __volatile__("inb %1,%0" :
-       "=a" (ret) :
-       "d" (port));
-   return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
-short port;
-{
-   unsigned short ret;
-   __asm__ __volatile__("inw %1,%0" :
-       "=a" (ret) :
-       "d" (port));
-   return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
-short port;
-{
-   unsigned int ret;
-   __asm__ __volatile__("inl %1,%0" :
-       "=a" (ret) :
-       "d" (port));
-   return ret;
-}
-
-#else /* GCCUSESGAS */
-
-static __inline__ void
-outb(port, val)
-     short port;
-     char val;
-{
-  __asm__ __volatile__("out%B0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outw(port, val)
-     short port;
-     short val;
-{
-  __asm__ __volatile__("out%W0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outl(port, val)
-     short port;
-     unsigned int val;
-{
-  __asm__ __volatile__("out%L0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ unsigned int
-inb(port)
-     short port;
-{
-  unsigned int ret;
-  __asm__ __volatile__("in%B0 (%1)" :
-		   "=a" (ret) :
-		   "d" (port));
-  return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
-     short port;
-{
-  unsigned int ret;
-  __asm__ __volatile__("in%W0 (%1)" :
-		   "=a" (ret) :
-		   "d" (port));
-  return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
-     short port;
-{
-  unsigned int ret;
-  __asm__ __volatile__("in%L0 (%1)" :
-		   "=a" (ret) :
-		   "d" (port));
-  return ret;
-}
-
-#endif /* GCCUSESGAS */
-#endif /* Lynx && __powerpc__ */
-#endif /* arm32 */
-#endif /* linux && __sparc__ */
-#endif /* linux && __alpha__ */
-#endif /* __FreeBSD__ && __alpha__ */
-
-#if defined(linux) || defined(__arm32__) || (defined(Lynx) && defined(__powerpc__))
-
-#define intr_disable()
-#define intr_enable()
-
-#else
-
-static __inline__ void
-intr_disable()
-{
-  __asm__ __volatile__("cli");
-}
-
-static __inline__ void
-intr_enable()
-{
-  __asm__ __volatile__("sti");
-}
-
-#endif /* else !linux && !__arm32__ */
-
-#else /* __GNUC__ */
-
-#if defined(_MINIX) && defined(_ACK)
-
-/* inb, outb, inw and outw are defined in the library */
-/* ... but I've no idea if the same is true for inl & outl */
-
-u8_t inb(U16_t);
-void outb(U16_t, U8_t);
-u16_t inw(U16_t);
-void outw(U16_t, U16_t);
-u32_t inl(U16_t);
-void outl(U16_t, U32_t);
-
-#else /* not _MINIX and _ACK */
-
-# if defined(__STDC__) && (__STDC__ == 1)
-#  ifndef NCR
-#  define asm __asm
-#  endif
-# endif
-# ifdef SVR4
-#  include <sys/types.h>
-#  ifndef __USLC__
-#   define __USLC__
-#  endif
-# endif
-#ifndef SCO325
-# include <sys/inline.h>
-#else
-# include "../common/scoasm.h"
-#endif
-#define intr_disable() asm("cli")
-#define intr_enable()  asm("sti")
-
-#endif /* _MINIX and _ACK */
-#endif /* __GNUC__ */
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/README b/board/MAI/bios_emulator/scitech/src/v86bios/README
deleted file mode 100644
index cb65674b2d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/README
+++ /dev/null
@@ -1,32 +0,0 @@
-
-This is a preliminary version of a VGA softbooter for LINUX.
-
-It makes use of the of the vm86() call and is therefore only
-usable on ix86 systems.
-There are plans to port this program to use a x86 emulator
-like x86emu. Also it may be ported to other operating systems.
-
-So far it has been tested on a small number of cards. It might
-well be that it will fail on your card.
-
-If you need to make modifications to the programs to be able
-to boot your card please let the author know.
-
-So far there is no command line interface. All options need
-to be hardcoded. You can do this by editing debug.h. You can
-turn on a bunch of debug output. Other options allow you to
-boot the primary card (CONFIG_ACTIVE_DEVICE), save the bios
-to a file (SAVE_BIOS), and map the original system bios
-(MAP_SYS_BIOS).
-
-The author wants to thank
- Hans Lermen   (dosemu)
- and
- Kendall Bennett (x86emu)
-for their support.
-
-Parts of the code - especially in v86.c and io.c - are based on code
-taken from dosemu. Parts of the code in int.c are based on code taken
-from x86emu
-
-Egbert Eich.  <Egbert.Eich@Physik.TU-Darmstadt.DE>
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr b/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr
deleted file mode 100644
index 9d2a80d7d8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr
+++ /dev/null
@@ -1,15 +0,0 @@
-/.*\(0x3da.*/||/.*\(0x3ba.*/ { 
-        if (v_3da != 1) print "_v_retrace_";
-        v_3da = 1;
-        next;        
-        }
-/.*\(0x42.*/||/.*\(0x43.*/ {
-        if (v_4x != 1) print "_timer_";
-        v_4x = 1;
-        next;
-}
-{
-    print;
-    v_3da = 0;
-    v_4x = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c b/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c
deleted file mode 100644
index 6b12dff4f9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c
+++ /dev/null
@@ -1,415 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <getopt.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00            /* default BIOS entry */
-#define BIOS_MEM 0x600
-
-CARD8 code[] = { 0xcd, 0x10, 0xf4 };
-struct config Config;
-
-static int map(void);
-static void unmap(void);
-static void runBIOS(int argc, char **argv);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(memType base);
-static int copy_sys_bios(void);
-static CARD32 setup_int_vect(void);
-static void update_bios_vars(void);
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, int argc, char **argv);
-static void print_regs(i86biosRegsPtr regs);
-void dprint(unsigned long start, unsigned long size);
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-
-static int vram_mapped = 0;
-static char* bios_var;
-
-
-int
-main(int argc,char **argv)
-{
-    CARD32 vbios_base;
-
-    Config.PrintPort = PRINT_PORT;
-    Config.IoStatistics = IO_STATISTICS;
-    Config.PrintIrq = PRINT_IRQ;
-    Config.PrintPci = PRINT_PCI;
-    Config.ShowAllDev = SHOW_ALL_DEV;
-    Config.PrintIp = PRINT_IP;
-    Config.SaveBios = SAVE_BIOS;
-    Config.Trace = TRACE;
-    Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY;
-    Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE;
-    Config.MapSysBios = MAP_SYS_BIOS;
-    Config.Resort = RESORT;
-    Config.FixRom = FIX_ROM;
-    Config.NoConsole = NO_CONSOLE;
-    Config.Verbose = VERBOSE;
-
-    if (!map())
-    exit(1);
-    if (!copy_sys_bios())
-    exit(1);
-    if (!(vbios_base = setup_int_vect()))
-    exit(1);
-    if (!map_vram())
-    exit(1);
-    if (!copy_vbios(vbios_base))
-    exit(1);
-
-    iopl(3);
-    setup_io();
-    runBIOS(argc,argv);
-    update_bios_vars();
-    unmap_vram();
-    iopl(0);
-    unmap();
-    printf("done !\n");
-    exit (1);
-}
-
-int
-map(void)
-{
-    void* mem;
-
-    mem = mmap(0, (size_t)SIZE,
-	       PROT_EXEC | PROT_READ | PROT_WRITE,
-	       MAP_FIXED | MAP_PRIVATE | MAP_ANON,
-	       -1, 0 );
-    if (mem != 0) {
-	perror("anonymous map");
-	return (0);
-    }
-    memset(mem,0,SIZE);
-
-    loadCodeToMem((unsigned char *) BIOS_START, code);
-    return (1);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
-    int mem_fd;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
-	goto Error;
-    if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
-	goto Error;
-
-    close(mem_fd);
-    return (1);
-
-Error:
-    perror("sys_bios");
-    close(mem_fd);
-    return (0);
-}
-
-static int
-map_vram(void)
-{
-    int mem_fd;
-
-#ifdef __ia64__
-    if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
-      {
-	perror("opening memory");
-	return 0;
-    }
-
-#ifndef __alpha__
-    if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
-		     PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
-		     mem_fd, VRAM_START) == (void *) -1)
-#else
-	 if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
-	 if (!_bus_base_sparse()) sparse_shift = 0;
-	 if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
-						 PROT_READ | PROT_WRITE,
-						 MAP_SHARED,
-						 mem_fd, (VRAM_START << sparse_shift)
-						 | _bus_base_sparse())) == (void *) -1)
-#endif
-      {
-	perror("mmap error in map_hardware_ram");
-	    close(mem_fd);
-	    return (0);
-	}
-    vram_mapped = 1;
-    close(mem_fd);
-    return (1);
-}
-
-static int
-copy_vbios(memType v_base)
-{
-    int mem_fd;
-    unsigned char *tmp;
-    int size;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) v_base, SEEK_SET) != (off_t) v_base) {
-	  fprintf(stderr,"Cannot lseek\n");
-	  goto Error;
-      }
-    tmp = (unsigned char *)malloc(3);
-    if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    if (lseek(mem_fd,(off_t) v_base,SEEK_SET) != (off_t) v_base)
-	goto Error;
-
-    if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
-	fprintf(stderr,"No bios found at: 0x%lx\n",v_base);
-	goto Error;
-    }
-#ifdef DEBUG
-	dprint((unsigned long)tmp,0x100);
-#endif
-    size = *(tmp+2) * 512;
-
-    if (read(mem_fd, (char *)v_base, (size_t) size) != (size_t) size) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    free(tmp);
-    close(mem_fd);
-    if (!chksum((CARD8*)v_base))
-	return (0);
-
-    return (1);
-
-Error:
-    perror("v_bios");
-    close(mem_fd);
-    return (0);
-}
-
-static void
-unmap(void)
-{
-    munmap(0,SIZE);
-}
-
-static void
-unmap_vram(void)
-{
-    if (!vram_mapped) return;
-
-    munmap((void*)VRAM_START,VRAM_SIZE);
-    vram_mapped = 0;
-}
-
-static void
-runBIOS(int argc, char ** argv)
-{
-    i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
-    printf("starting BIOS\n");
-#endif
-    setup_bios_regs(&bRegs, argc, argv);
-    do_x86(BIOS_START,&bRegs);
-    print_regs(&bRegs);
-#ifdef V86BIOS_DEBUG
-    printf("done\n");
-#endif
-}
-
-static CARD32
-setup_int_vect(void)
-{
-    int mem_fd;
-    CARD32 vbase;
-    void *map;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-    perror("opening memory");
-    return (0);
-    }
-
-    if ((map = mmap((void *) 0, (size_t) 0x2000,
-	 PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
-	 mem_fd, 0)) == (void *)-1)   {
-    perror("mmap error in map_hardware_ram");
-    close(mem_fd);
-    return (0);
-    }
-
-    close(mem_fd);
-    memcpy(0,map,BIOS_MEM);
-    munmap(map,0x2000);
-    /*
-     * create a backup copy of the bios variables to write back the
-     * modified values
-     */
-    bios_var = (char *)malloc(BIOS_MEM);
-    memcpy(bios_var,0,BIOS_MEM);
-
-    vbase = (*((CARD16*)(0x10 << 2) + 1)) << 4;
-    fprintf(stderr,"vbase: 0x%x\n",vbase);
-    return vbase;
-}
-
-static void
-update_bios_vars(void)
-{
-    int mem_fd;
-    void *map;
-    memType i;
-
-#ifdef __ia64__
-    if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
-      {
-	perror("opening memory");
-	return;
-      }
-
-    if ((map = mmap((void *) 0, (size_t) 0x2000,
-	 PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
-	 mem_fd, 0)) == (void *)-1)   {
-    perror("mmap error in map_hardware_ram");
-    close(mem_fd);
-    return;
-    }
-
-    for (i = 0; i < BIOS_MEM; i++) {
-    if (bios_var[i] != *(CARD8*)i)
-	*((CARD8*)map + i) = *(CARD8*)i;
-    }
-
-    munmap(map,0x2000);
-    close(mem_fd);
-}
-
-
-static void
-setup_bios_regs(i86biosRegsPtr regs, int argc, char **argv)
-{
-    int c;
-
-    regs->ax = 0;
-    regs->bx = 0;
-    regs->cx = 0;
-    regs->dx = 0;
-    regs->es = 0;
-    regs->di = 0;
-    opterr = 0;
-    while ((c = getopt(argc,argv,"a:b:c:d:e:i:")) != EOF) {
-    switch (c) {
-    case 'a':
-	regs->ax = strtol(optarg,NULL,0);
-	break;
-    case 'b':
-	regs->bx = strtol(optarg,NULL,0);
-	break;
-    case 'c':
-	regs->cx = strtol(optarg,NULL,0);
-	break;
-    case 'd':
-	regs->dx = strtol(optarg,NULL,0);
-	break;
-    case 'e':
-	regs->es = strtol(optarg,NULL,0);
-	break;
-    case 'i':
-	regs->di = strtol(optarg,NULL,0);
-	break;
-    }
-    }
-}
-
-
-static int
-chksum(CARD8 *start)
-{
-  CARD16 size;
-  CARD8 val = 0;
-  int i;
-
-  size = *(start+2) * 512;
-  for (i = 0; i<size; i++)
-    val += *(start + i);
-
-  if (!val)
-    return 1;
-
-    fprintf(stderr,"BIOS cksum wrong!\n");
-  return 0;
-}
-
-static void
-print_regs(i86biosRegsPtr regs)
-{
-    printf("ax=%x bx=%x cx=%x dx=%x es=%x di=%x\n",(CARD16)regs->ax,
-       (CARD16)regs->bx,(CARD16)regs->cx,(CARD16)regs->dx,
-       (CARD16)regs->es,(CARD16)regs->di);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
-    int i;
-    CARD8 val;
-
-    for ( i=0;;i++) {
-	val = code[i];
-	*ptr++ = val;
-	if (val == 0xf4) break;
-    }
-    return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
-    int i,j;
-    char *c = (char *)start;
-
-    for (j = 0; j < (size >> 4); j++) {
-	printf ("\n0x%lx:  ",(unsigned long)c);
-	for (i = 0; i<16; i++)
-	    printf("%x ",(unsigned char) (*(c++)));
-    }
-    printf("\n");
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/command.c b/board/MAI/bios_emulator/scitech/src/v86bios/command.c
deleted file mode 100644
index e2bce6df1b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/command.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <stdio.h>
-#include <readline/readline.h>
-#include <readline/history.h>
-#include <malloc.h>
-
-#define PROMPT ">"
-
-
-void
-getline(char *buf,int *num,int max_num)
-{
-    static int line_len = 0;
-    static char *line = NULL;
-    static char *line_pointer = NULL;
-    static int len = 0;
-    int tmp_len;
-    char *buff;
-
-    if (len <= 0) {
-    buff = readline(PROMPT);
-    add_history(buff);
-
-    if ((tmp_len = strlen(buff)) > line_len) {
-	free(line);
-	line = malloc(tmp_len);
-	line_len = tmp_len;
-    }
-    sprintf(line,"%s\n",buff);
-    free(buff);
-    line_pointer = line;
-    len = strlen(line);
-    }
-
-    *num = max_num > len? len : max_num;
-    strncpy(buf,line_pointer,*num);
-    line_pointer = line_pointer + *num;
-    len = len - *num;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/console.c b/board/MAI/bios_emulator/scitech/src/v86bios/console.c
deleted file mode 100644
index 816ac4b4a9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/console.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include <sys/ioctl.h>
-#include <sys/vt.h>
-#include <sys/kd.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include "debug.h"
-#include "v86bios.h"
-
-console
-open_console(void)
-{
-    int fd;
-    int VTno;
-    char VTname[11];
-    console Con = {-1,-1};
-    struct vt_stat vts;
-
-    if (NO_CONSOLE)
-	    return Con;
-
-    if ((fd = open("/dev/tty0",O_WRONLY,0)) < 0)
-	return Con;
-
-    if ((ioctl(fd, VT_OPENQRY, &VTno) < 0) || (VTno == -1)) {
-	fprintf(stderr,"cannot get a vt\n");
-	return Con;
-    }
-
-    close(fd);
-    sprintf(VTname,"/dev/tty%i",VTno);
-
-    if ((fd = open(VTname, O_RDWR|O_NDELAY, 0)) < 0) {
-	fprintf(stderr,"cannot open console\n");
-	return Con;
-    }
-
-    if (ioctl(fd, VT_GETSTATE, &vts) == 0)
-	Con.vt = vts.v_active;
-
-    if (ioctl(fd, VT_ACTIVATE, VTno) != 0) {
-	fprintf(stderr,"cannot activate console\n");
-	close(fd);
-	return Con;
-    }
-    if (ioctl(fd, VT_WAITACTIVE, VTno) != 0) {
-	fprintf(stderr,"wait for active console failed\n");
-	close(fd);
-	return Con;
-    }
-    Con.fd = fd;
-    return Con;
-}
-
-void
-close_console(console Con)
-{
-    if (Con.fd == -1)
-	return;
-
-    if (Con.vt >=0)
-	ioctl(Con.fd, VT_ACTIVATE, Con.vt);
-
-    close(Con.fd);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/debug.h b/board/MAI/bios_emulator/scitech/src/v86bios/debug.h
deleted file mode 100644
index c5c906b622..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/debug.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-/*#define V86BIOS_DEBUG */
-
-/*
- * uncomment the following if needed
- * should be command line options
- */
-
-#define PRINT_PORT 0
-#define IO_STATISTICS 0
-#define PRINT_IRQ 0
-#define PRINT_PCI 1
-#define PRINT_IP 0    /* print IP address with PIO information */
-#define TRACE 0       /* turn on debugger in x86emu            */
-		      /* requires x86emu compiled with -DDEBUG */
-
-/*
- * these should not be here.
- * Should be converted to command line options.
- */
-#define CONFIG_ACTIVE_ONLY 0
-#define CONFIG_ACTIVE_DEVICE 1
-#define SAVE_BIOS 0
-#define MAP_SYS_BIOS 1
-#define RESORT 1
-#define FIX_ROM 0
-#define NO_CONSOLE 0
-#define SHOW_ALL_DEV 0
-#define VERBOSE 0
-
-/*#define V_BIOS 0xe0000 */
-/*#define V_BIOS 0xe4000 */
-
-
-#if (PRINT_IO == 1) && (PRINT_PORT == 0)
-# define PRINT_IO 0
-#endif
-#if (IO_STATISTICS == 1) && (PRINT_PORT == 0)
-# define IO_STATISTICS 0
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards b/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards
deleted file mode 100644
index 943d44ede4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards
+++ /dev/null
@@ -1,76 +0,0 @@
-What I had to do to make cards happy:
-
-1. Tseng ET4000 W32P
-This card wants to call the original system BIOS video routines.
-It sets the int 0x42 vector to F000:F065, the entry point to the
-system bios video routines. 
-CAVE: don't catch int 0x42 and use the vbios int 0x10 routines. 
-At early stage during initialization they call int 0x42. This 
-causes an infinite loop.
-
-2. ATi Mach64 Rage IIc AGP
-This card does similar things like the Tseng ET4000 W32P.
-However it doesn't have the problem with the ininite loop.
-
-3. Elsa Victory II-A16 AGP Banshee
-This card is very clever: It knows it is an AGP card. Therefore
-it knows it is behind a PCI-PCI bridge. It also knows that noone
-else is behind this bridge. Therefore it start reprogramming the
-bridge! For this it assumes the AGP bridge is on bus 1.
-
-4. Elsa Gloria Synergy 8 ViVo AGP PM2
-This card likes to see a complete interrupt vector table. If
-we fill this table with 0 the VBIOS detects this and quits 
-initialization.
-
-5. Dimond Viper 330 AGP NVIDIA Riva 128.
-This card has a similar problem like the Elsa Gloria. It wants
-to read the system BIOS date at 0xffffd.
-
-6. Matrox Mystique PCI 
-This card reads the IO port 0x62. If it doesn't like what it sees
-it loops forever. To keep the card happy put 0xfc into 0xffffe.
-This location holds the system model id. 0xfc means IBM-AT.
- One can make an interesting observation: this card likes to know 
-with whom it has to share the system. Therefore it accesses PCI 
-config space of all the other cards. It does this bypassing the 
-PCI BIOS by reading the PCI access ports directly.
-
-7. Matrox G100 AGP
-This card has the same problem as the Mystique. 
-
-Apperantly this works now. However not all combinations of cards are
-checked, yet.
-
-Further notes:
-the IO register 0x42-0x43 as well as 0x61-0x63 are of special interest
-for many graphic cards. They should be emulated.
-The so called "Industry Standard BIOS Entry Points" to int 0x42 (0xFF065)
-and to int 0x1a (0xFFE6E) should be filled with useful code. This code
-needs to return as if it was called as int.
-The subvendor ID PCI registers might cause problems. On some chipsets
-they are programmed in a non-obivous non-PCI conformant way.
-V_Bioses are seen to modify the following int:
-0x10 (default video), 0x1f(font table), 0x42(copy of default video), 
-0x43 (??), 0x6d (copy of default video - same as 0x10?)
-
-TODO:
-Int 0x6d needs to be done.
-All interrupts where there is no default industry standard entry point
-should point to an unused location in the 0xF000 segmant (possibly 
-0xF0000). This way they could be trapped. A trap handler for
-a. int 0x42 and int 0x1a needs to be implemented.
-The default "industry entry point" for video and PCI (0xFFE6E) should
-also be implemented. (any others?) They should either be routed to
-int 0x42(0x6d?) (video) and 0x1A (PCI) or some other interrupts to
-trap them. Mapping of system bios might not be a good idea. Maybe
-the system bios area should just be filled with "hlt" to trap any
-access there.
-Handling of timer IO registers 0x42, 0x43 and IO registers 0x61, 0x62.
-
-Find documentation:
-- on interrupt vector table
-- on industry standard entry points to the system bios
-- on IO registers 0x61 and 0x62
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/hexdump b/board/MAI/bios_emulator/scitech/src/v86bios/hexdump
deleted file mode 100644
index 4f359e5edd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/hexdump
+++ /dev/null
@@ -1,3 +0,0 @@
-"%06.6_ax  "  16/1 "%02x " 
-"  " 16/1 "%_p" 
-"\n"
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/int.c b/board/MAI/bios_emulator/scitech/src/v86bios/int.c
deleted file mode 100644
index 3504c6cc3c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/int.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-
-#include "v86bios.h"
-#include "AsmMacros.h"
-#include "pci.h"
-
-static int int1A_handler(struct regs86 *regs);
-static int int42_handler(int num, struct regs86 *regs);
-
-int
-int_handler(int num, struct regs86 *regs)
-{
-    switch (num) {
-    case 0x10:
-    case 0x42:
-	return (int42_handler(num,regs));
-    case 0x1A:
-	return (int1A_handler(regs));
-    default:
-	return 0;
-    }
-    return 0;
-}
-
-static int
-int42_handler(int num,struct regs86 *regs)
-{
-    unsigned char c;
-    CARD32 val;
-
-    i_printf("int 0x%x: ax:0x%lx bx:0x%lx cx:0x%lx dx:0x%lx\n",num,
-	   regs->eax,regs->ebx, regs->ecx, regs->edx);
-
-    /*
-     * video bios has modified these -
-     * leave it to the video bios to do this
-     */
-
-    val = getIntVect(num);
-    if (val != 0xF000F065)
-      return 0;
-
-    if ((regs->ebx & 0xff) == 0x32) {
-	switch (regs->eax & 0xFFFF) {
-	case 0x1200:
-	    i_printf("enabling video\n");
-	    c = inb(0x3cc);
-	    c |= 0x02;
-	    outb(0x3c2,c);
-	    return 1;
-	case 0x1201:
-	    i_printf("disabling video\n");
-	    c = inb(0x3cc);
-	    c &= ~0x02;
-	    outb(0x3c2,c);
-	    return 1;
-	default:
-	}
-    }
-    if (num == 0x42)
-	return 1;
-    else
-	return 0;
-}
-
-#define SUCCESSFUL              0x00
-#define DEVICE_NOT_FOUND        0x86
-#define BAD_REGISTER_NUMBER     0x87
-
-static int
-int1A_handler(struct regs86 *regs)
-{
-    CARD32 Slot;
-    PciStructPtr pPci;
-
-    if (! CurrentPci) return 0; /* oops */
-
-    i_printf("int 0x1a: ax=0x%lx bx=0x%lx cx=0x%lx dx=0x%lx di=0x%lx"
-	 " si=0x%lx\n", regs->eax,regs->ebx,regs->ecx,regs->edx,
-	 regs->edi,regs->esi);
-    switch (regs->eax & 0xFFFF) {
-    case 0xb101:
-	regs->eax  &= 0xFF00;   /* no config space/special cycle support */
-	regs->edx = 0x20494350; /* " ICP" */
-	regs->ebx  = 0x0210;    /* Version 2.10 */
-	regs->ecx  &= 0xFF00;
-	regs->ecx |= (pciMaxBus & 0xFF);   /* Max bus number in system */
-	regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	i_printf("ax=0x%lx dx=0x%lx bx=0x%lx cx=0x%lx flags=0x%lx\n",
-		 regs->eax,regs->edx,regs->ebx,regs->ecx,regs->eflags);
-	return 1;
-    case 0xb102:
-	if (((regs->edx & 0xFFFF) == CurrentPci->VendorID) &&
-	    ((regs->ecx & 0xFFFF) == CurrentPci->DeviceID) &&
-	    (regs->esi == 0)) {
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	    regs->ebx = pciSlotBX(CurrentPci);
-	}
-	else if (Config.ShowAllDev &&
-	     (pPci = findPciDevice(regs->edx,regs->ecx,regs->esi)) != NULL) {
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	    regs->ebx = pciSlotBX(pPci);
-	} else  {
-	    regs->eax = (regs->eax & 0x00FF) | (DEVICE_NOT_FOUND << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx bx=0x%lx flags=0x%lx\n",
-		 regs->eax,regs->ebx,regs->eflags);
-	return 1;
-    case 0xb103:
-	if (((regs->ecx & 0xFF) == CurrentPci->Interface) &&
-	    (((regs->ecx & 0xFF00) >> 8) == CurrentPci->SubClass) &&
-	    (((regs->ecx & 0xFFFF0000) >> 16) == CurrentPci->BaseClass) &&
-	    ((regs->esi & 0xff) == 0)) {
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->ebx = pciSlotBX(CurrentPci);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	}
-	else if (Config.ShowAllDev
-	     && (pPci = findPciClass(regs->ecx & 0xFF, (regs->ecx & 0xff00) >> 8,
-			 (regs->ecx & 0xffff0000) >> 16, regs->esi)) != NULL) {
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->ebx = pciSlotBX(pPci);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (DEVICE_NOT_FOUND << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx flags=0x%lx\n",regs->eax,regs->eflags);
-	return 1;
-    case 0xb108:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    regs->ecx &= 0xFFFFFF00;
-	    regs->ecx |= PciRead8(regs->edi,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
-		 regs->eax,regs->ecx,regs->eflags);
-	return 1;
-    case 0xb109:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    regs->ecx &= 0xFFFF0000;
-	    regs->ecx |= PciRead16(regs->edi,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
-		 regs->eax,regs->ecx,regs->eflags);
-	return 1;
-    case 0xb10a:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    regs->ecx &= 0;
-	    regs->ecx |= PciRead32(regs->edi,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
-		 regs->eax,regs->ecx,regs->eflags);
-	return 1;
-    case 0xb10b:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    PciWrite8(regs->edi,(CARD8)regs->ecx,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
-	return 1;
-    case 0xb10c:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    PciWrite16(regs->edi,(CARD16)regs->ecx,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
-	return 1;
-    case 0xb10d:
-	i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
-	if ((Slot = findPci(regs->ebx))) {
-	    PciWrite32(regs->edi,(CARD32)regs->ecx,Slot);
-	    regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
-	    regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
-	} else {
-	    regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
-	    regs->eflags |= ((unsigned long)0x01); /* set carry flag */
-	}
-	i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
-	return 1;
-    default:
-	return 0;
-    }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/io.c b/board/MAI/bios_emulator/scitech/src/v86bios/io.c
deleted file mode 100644
index f35b43e9b9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/io.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-
-#include <stdio.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-#include "AsmMacros.h"
-#include "v86bios.h"
-#include "pci.h"
-
-int r_inb = 0, r_inw = 0, r_inl = 0, r_outb = 0, r_outw = 0, r_outl = 0;
-int in_b = 0, in_w = 0, in_l = 0, out_b = 0, out_w = 0, out_l = 0;
-
-
-int
-port_rep_inb(CARD16 port, CARD8 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD8 *dst = base;
-
-    p_printf(" rep_insb(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_inb++;
-    while (count--) {
-	*dst = inb(port);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-int
-port_rep_inw(CARD16 port, CARD16 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD16 *dst = base;
-
-    p_printf(" rep_insw(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_inw++;
-    while (count--) {
-	*dst = inw(port);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-int
-port_rep_inl(CARD16 port, CARD32 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD32 *dst = base;
-
-    p_printf(" rep_insl(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_inl++;
-    while (count--) {
-	*dst = inl(port);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-int
-port_rep_outb(CARD16 port, CARD8 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD8 *dst = base;
-
-    p_printf(" rep_outb(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_outb++;
-    while (count--) {
-	outb(port,*dst);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-int
-port_rep_outw(CARD16 port, CARD16 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD16 *dst = base;
-
-    p_printf(" rep_outw(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_outw++;
-    while (count--) {
-	outw(port,*dst);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-int
-port_rep_outl(CARD16 port, CARD32 *base, int d_f, CARD32 count)
-{
-    register int inc = d_f ? -1 : 1;
-    CARD32 *dst = base;
-
-    p_printf(" rep_outl(%#x) %d bytes at %p %s",
-	     port, count, base, d_f?"up":"down");
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    r_outl++;
-    while (count--) {
-	outl(port,*dst);
-	dst += inc;
-    }
-    return (dst-base);
-}
-
-CARD8
-p_inb(CARD16 port)
-{
-    CARD8 val = 0;
-    in_b++;
-    val = inb(port);
-    p_printf(" inb(%#x) = %2.2x",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    return val;
-}
-
-CARD16
-p_inw(CARD16 port)
-{
-    CARD16 val = 0;
-    in_w++;
-    val = inw(port);
-    p_printf(" inw(%#x) = %4.4x",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    return val;
-}
-
-CARD32
-p_inl(CARD16 port)
-{
-    CARD32 val = 0;
-    in_l++;
-#ifdef NEED_PCI_IO
-    if (cfg1in(port,&val))
-	return val;
-    else
-#endif
-    val = inl(port);
-    p_printf(" inl(%#x) = %8.8x",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    return val;
-}
-
-void
-p_outb(CARD16 port, CARD8 val)
-{
-    out_b++;
-    p_printf(" outb(%#x, %2.2x)",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    outb(port,val);
-}
-
-void
-p_outw(CARD16 port, CARD16 val)
-{
-    out_w++;
-    p_printf(" outw(%#x, %4.4x)",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-    outw(port,val);
-}
-
-void
-p_outl(CARD16 port, CARD32 val)
-{
-    out_l++;
-    p_printf(" outl(%#x, %8.8x)",port,val);
-    if (Config.PrintIp)
-	p_printf(" %x\n",getIP());
-    else p_printf("\n");
-
-#ifdef NEED_PCI_IO
-    if (cfg1out(port,val))
-	return;
-#endif
-    outl(port,val);
-}
-
-void
-io_statistics(void)
-{
-    p_printf("rep: inb: %i, inw: %i, inl: %i, outb: %i, outw: %i, outl: %i\n",
-	 r_inb,r_inw,r_inl,r_outb,r_outw,r_outl);
-    p_printf("inb: %i, inw: %i, inl: %i, outb: %i, outw: %i, outl: %i\n",
-	 in_b,in_w,in_l,out_b,out_w,out_l);
-}
-
-void
-clear_stat(void)
-{
-    r_inb = r_inw = r_inl = r_outb = r_outw = r_outl = 0;
-    in_b = in_w = in_l = out_b = out_w = out_l = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/lex.l b/board/MAI/bios_emulator/scitech/src/v86bios/lex.l
deleted file mode 100644
index 3a3391c7b4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/lex.l
+++ /dev/null
@@ -1,79 +0,0 @@
-%{
-#include "parser.h"
-
-#include <string.h>
-#include <stdio.h>
-
- void getline(char *buf,int *num,int max_num);
-    
-#define YY_INPUT(buf,result,max_size) {\
-      getline(buf,&result,max_size);\
-      }
-
- void
- yyerror (char *s)  
- {
-     printf ("%s\n", s);
- }
-
-%}
-
-DIGIT [0-9a-fA-F]
-
-%%
-
-"0x"?{DIGIT}+ { yylval = strtol(yytext,NULL,0); return TOK_NUM; }
-"ax"          { return TOK_REG_AX; }
-"bx"          { return TOK_REG_BX; }
-"cx"          { return TOK_REG_CX; }
-"dx"          { return TOK_REG_DX; }
-"di"          { return TOK_REG_SI; }
-"si"          { return TOK_REG_DI; }
-"ds"          { return TOK_SEG_DS; }
-"es"          { return TOK_SEG_ES; }
-":"           { return TOK_SEP;}
-"$"{DIGIT}{1,2} { yylval = strtol(yytext+1,NULL,0); return TOK_VAR; }
-"$mem"        { return TOK_VAR_MEM; }
-[ \t]+
-"#".*[\n]   { return TOK_END; }
-"boot"        { return TOK_COMMAND_BOOT; }
-"do"          { return TOK_COMMAND_EXEC; }
-"\"".*"\""    { yylval = (unsigned long) yytext; return TOK_STRING; }
-"byte"        { return TOK_BYTE; }
-"word"        { return TOK_WORD; }
-"long"        { return TOK_LONG; }
-"setmem"      { return TOK_COMMAND_MEMSET; }
-"dumpmem"     { return TOK_COMMAND_MEMDUMP; }
-"quit"        { return TOK_COMMAND_QUIT; }
-"\n"          { return TOK_END; }
-"select"      { return TOK_SELECT; }
-"isa"         { return TOK_ISA; }
-"pci"         { return TOK_PCI; }
-"pport"       { return TOK_PRINT_PORT; }
-"iostat"      { return TOK_IOSTAT; }
-"pirq"        { return TOK_PRINT_IRQ; }
-"ppci"        { return TOK_PPCI; }
-"pip"         { return TOK_PIP; }
-"trace"       { return TOK_TRACE; }
-"on"          { return TOK_ON; }
-"off"         { return TOK_OFF; }
-"verbose"     { return TOK_VERBOSE; }
-"log"         { return TOK_LOG; }
-"print"       { return TOK_STDOUT; }
-"clstat"      { return TOK_CLSTAT; }
-"hlt"         { return TOK_HLT; }
-"del"         { return TOK_DEL; }
-"ioperm"      { return TOK_IOPERM; }
-"lpci"        { return TOK_DUMP_PCI; }
-"bootbios"    { return TOK_BOOT_BIOS; }
-"?"           { return '?'; }
-.             { return TOK_ERROR; }
-    
-%%
-
-
-
-
-
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/main.c b/board/MAI/bios_emulator/scitech/src/v86bios/main.c
deleted file mode 100644
index 15f91150f8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/main.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#define DELETE
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00            /* default BIOS entry */
-
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0, 0xf4 }; */
-#define VB_X(x) (V_BIOS >> x) & 0xFF
-CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xf4 };
-/*CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xb8, 0x03, 0x00, */
-/*0xcd, 0x10, 0xf4 }; */
-/*CARD8 code[] = {  0xb8 , 0xf0 , 0xf0 ,0xf4 }; */
-
-static void sig_handler(int);
-static int map(void);
-static void unmap(void);
-static void bootBIOS(CARD16 ax);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(void);
-static int copy_sys_bios(void);
-static void save_bios_to_file(void);
-static int setup_system_bios(void);
-static void setup_int_vect(void);
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax);
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-void dprint(unsigned long start, unsigned long size);
-
-static int vram_mapped = 0;
-static CARD8 save_msr;
-static CARD8 save_pos102;
-static CARD8 save_vse;
-static CARD8 save_46e8;
-console Console;
-struct config Config;
-
-
-int
-main(void)
-{
-    int Active_is_Pci = 0;
-#ifdef DELETE
-    Config.PrintPort = PRINT_PORT;
-    Config.IoStatistics = IO_STATISTICS;
-    Config.PrintIrq = PRINT_IRQ;
-    Config.PrintPci = PRINT_PCI;
-    Config.ShowAllDev = SHOW_ALL_DEV;
-    Config.PrintIp = PRINT_IP;
-    Config.SaveBios = SAVE_BIOS;
-    Config.Trace = TRACE;
-    Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY;
-    Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE;
-    Config.MapSysBios = MAP_SYS_BIOS;
-    Config.Resort = RESORT;
-    Config.FixRom = FIX_ROM;
-    Config.NoConsole = NO_CONSOLE;
-    Config.Verbose = VERBOSE;
-
-    if (!map())
-	exit(1);
-
-    if (!setup_system_bios())
-	exit(1);
-
-    iopl(3);
-    setup_io();
-
-    scan_pci();
-    if (!CurrentPci && !Config.ConfigActiveDevice && !Config.ConfigActiveOnly)
-	exit (1);
-#endif
-    Console = open_console();
-
-    if (Config.ConfigActiveOnly) {
-	CARD16 ax;
-	int activePci = 0;
-	int error = 0;
-
-	while (CurrentPci) {
-	    if (CurrentPci->active) {
-		activePci = 1;
-			    if (!(mapPciRom(NULL) && chksum((CARD8*)V_BIOS)))
-				error = 1;
-			    break;
-	    }
-	    CurrentPci = CurrentPci->next;
-	}
-	ax = ((CARD16)(CurrentPci->bus) << 8)
-	    | (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
-	P_printf("ax: 0x%x\n",ax);
-	setup_int_vect();
-	if (!error && (activePci || copy_vbios())) {
-
-	    if (Config.SaveBios) save_bios_to_file();
-	    if  (map_vram()) {
-		printf("initializing ISA\n");
-			    bootBIOS(0);
-	    }
-	}
-	unmap_vram();
-	sleep(1);
-    } else {
-	/* disable primary card */
-	save_msr = inb(0x3CC);
-	save_vse = inb(0x3C3);
-	save_46e8 = inb(0x46e8);
-	save_pos102 = inb(0x102);
-
-	signal(2,sig_handler);
-	signal(11,sig_handler);
-
-	outb(0x3C2,~(CARD8)0x03 & save_msr);
-	outb(0x3C3,~(CARD8)0x01 & save_vse);
-	outb(0x46e8, ~(CARD8)0x08 & save_46e8);
-	outb(0x102, ~(CARD8)0x01 & save_pos102);
-
-	pciVideoDisable();
-
-	while (CurrentPci) {
-	    CARD16 ax;
-
-	    if (CurrentPci->active) {
-		Active_is_Pci = 1;
-		if (!Config.ConfigActiveDevice) {
-		    CurrentPci = CurrentPci->next;
-		    continue;
-		}
-	    }
-
-	    EnableCurrent();
-
-	    if (CurrentPci->active) {
-		outb(0x102, save_pos102);
-		outb(0x46e8, save_46e8);
-		outb(0x3C3, save_vse);
-		outb(0x3C2, save_msr);
-	    }
-
-	    /* clear interrupt vectors */
-	    setup_int_vect();
-
-	    ax = ((CARD16)(CurrentPci->bus) << 8)
-		| (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
-	    P_printf("ax: 0x%x\n",ax);
-
-	    if (!((mapPciRom(NULL) && chksum((CARD8*)V_BIOS))
-		  || (CurrentPci->active && copy_vbios()))) {
-		CurrentPci = CurrentPci->next;
-		continue;
-	    }
-	    if (!map_vram()) {
-		CurrentPci = CurrentPci->next;
-		continue;
-	    }
-	    if (Config.SaveBios) save_bios_to_file();
-	    printf("initializing PCI bus: %i dev: %i func: %i\n",CurrentPci->bus,
-		   CurrentPci->dev,CurrentPci->func);
-	    bootBIOS(ax);
-	    unmap_vram();
-
-	    CurrentPci = CurrentPci->next;
-	}
-
-	/* We have an ISA device - configure if requested */
-	if (!Active_is_Pci && Config.ConfigActiveDevice) {
-	    pciVideoDisable();
-
-	    outb(0x102, save_pos102);
-	    outb(0x46e8, save_46e8);
-	    outb(0x3C3, save_vse);
-	    outb(0x3C2, save_msr);
-
-	    setup_int_vect();
-	    if (copy_vbios()) {
-
-		if (Config.SaveBios) save_bios_to_file();
-		if  (map_vram()) {
-		    printf("initializing ISA\n");
-		    bootBIOS(0);
-		}
-	    }
-
-	    unmap_vram();
-	    sleep(1);
-	}
-
-	pciVideoRestore();
-
-	outb(0x102, save_pos102);
-	outb(0x46e8, save_46e8);
-	outb(0x3C3, save_vse);
-	outb(0x3C2, save_msr);
-    }
-
-    close_console(Console);
-#ifdef DELETE
-    iopl(0);
-    unmap();
-
-    printf("done !\n");
-#endif
-    if (Config.IoStatistics)
-	io_statistics();
-#ifdef DELETE
-    exit(0);
-#endif
-}
-
-int
-map(void)
-{
-    void* mem;
-
-    mem = mmap(0, (size_t)SIZE,
-	       PROT_EXEC | PROT_READ | PROT_WRITE,
-	       MAP_FIXED | MAP_PRIVATE | MAP_ANON,
-	       -1, 0 );
-    if (mem != 0) {
-	perror("anonymous map");
-	return (0);
-    }
-    memset(mem,0,SIZE);
-
-    loadCodeToMem((unsigned char *) BIOS_START, code);
-    return (1);
-}
-
-static void
-unmap(void)
-{
-    munmap(0,SIZE);
-}
-
-static void
-bootBIOS(CARD16 ax)
-{
-    i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
-    printf("starting BIOS\n");
-#endif
-    setup_bios_regs(&bRegs, ax);
-    do_x86(BIOS_START,&bRegs);
-#ifdef V86BIOS_DEBUG
-    printf("done\n");
-#endif
-}
-
-static int
-map_vram(void)
-{
-    int mem_fd;
-
-#ifdef __ia64__
-    if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
-      {
-	perror("opening memory");
-	return 0;
-    }
-
-#ifndef __alpha__
-    if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
-		     PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
-		     mem_fd, VRAM_START) == (void *) -1)
-#else
-	 if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
-	 if (!_bus_base_sparse()) sparse_shift = 0;
-	 if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
-						 PROT_READ | PROT_WRITE,
-						 MAP_SHARED,
-						 mem_fd, (VRAM_START << sparse_shift)
-						 | _bus_base_sparse())) == (void *) -1)
-#endif
-      {
-	perror("mmap error in map_hardware_ram");
-	    close(mem_fd);
-	    return (0);
-	}
-    vram_mapped = 1;
-    close(mem_fd);
-    return (1);
-}
-
-static void
-unmap_vram(void)
-{
-    if (!vram_mapped) return;
-
-    munmap((void*)VRAM_START,VRAM_SIZE);
-    vram_mapped = 0;
-}
-
-static int
-copy_vbios(void)
-{
-    int mem_fd;
-    unsigned char *tmp;
-    int size;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) V_BIOS, SEEK_SET) != (off_t) V_BIOS) {
-	  fprintf(stderr,"Cannot lseek\n");
-	  goto Error;
-      }
-    tmp = (unsigned char *)malloc(3);
-    if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    if (lseek(mem_fd,(off_t) V_BIOS,SEEK_SET) != (off_t) V_BIOS)
-	goto Error;
-
-    if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
-#ifdef DEBUG
-	dprint((unsigned long)tmp,0x100);
-#endif
-	fprintf(stderr,"No bios found at: 0x%x\n",V_BIOS);
-	goto Error;
-    }
-    size = *(tmp+2) * 512;
-
-    if (read(mem_fd, (char *)V_BIOS, (size_t) size) != (size_t) size) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    free(tmp);
-    close(mem_fd);
-    if (!chksum((CARD8)V_BIOS))
-	return (0);
-
-    return (1);
-
-Error:
-    perror("v_bios");
-    close(mem_fd);
-    return (0);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
-    int mem_fd;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
-	goto Error;
-    if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
-	goto Error;
-
-    close(mem_fd);
-    return (1);
-
-Error:
-    perror("sys_bios");
-    close(mem_fd);
-    return (0);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
-    int i;
-    CARD8 val;
-
-    for ( i=0;;i++) {
-	val = code[i];
-	*ptr++ = val;
-	if (val == 0xf4) break;
-    }
-    return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
-    int i,j;
-    char *c = (char *)start;
-
-    for (j = 0; j < (size >> 4); j++) {
-    char *d = c;
-    printf("\n0x%lx:  ",(unsigned long)c);
-    for (i = 0; i<16; i++)
-	printf("%2.2x ",(unsigned char) (*(c++)));
-    c = d;
-    for (i = 0; i<16; i++) {
-	printf("%c",((((CARD8)(*c)) > 32) && (((CARD8)(*c)) < 128)) ?
-	   (unsigned char) (*(c)): '.');
-	c++;
-    }
-    }
-    printf("\n");
-}
-
-static void
-save_bios_to_file(void)
-{
-    static int num = 0;
-    int size, count;
-    char file_name[256];
-    int fd;
-
-    sprintf(file_name,"bios_%i.fil",num);
-    if ((fd =  open(file_name,O_WRONLY | O_CREAT | O_TRUNC,00644)) == -1)
-	return;
-    size = (*(unsigned char*)(V_BIOS + 2)) * 512;
-#ifdef V86BIOS_DEBUG
-    dprint(V_BIOS,20);
-#endif
-    if ((count = write(fd,(void *)(V_BIOS),size)) != size)
-	fprintf(stderr,"only saved %i of %i bytes\n",size,count);
-    num++;
-}
-
-static void
-sig_handler(int unused)
-{
-    fflush(stdout);
-    fflush(stderr);
-
-    /* put system back in a save state */
-    unmap_vram();
-    pciVideoRestore();
-    outb(0x102, save_pos102);
-    outb(0x46e8, save_46e8);
-    outb(0x3C3, save_vse);
-    outb(0x3C2, save_msr);
-
-    close_console(Console);
-    iopl(0);
-    unmap();
-
-    exit(1);
-}
-
-/*
- * For initialization we just pass ax to the BIOS.
- * PCI BIOSes need this. All other register are set 0.
- */
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax)
-{
-    regs->ax = ax;
-    regs->bx = 0;
-    regs->cx = 0;
-    regs->dx = 0;
-    regs->es = 0;
-    regs->di = 0;
-}
-
-/*
- * here we are really paranoid about faking a "real"
- * BIOS. Most of this information was pulled from
- * dosem.
- */
-static void
-setup_int_vect(void)
-{
-    const CARD16 cs = 0x0000;
-    const CARD16 ip = 0x0;
-    int i;
-
-    /* let the int vects point to the SYS_BIOS seg */
-    for (i=0; i<0x80; i++) {
-	((CARD16*)0)[i<<1] = ip;
-	((CARD16*)0)[(i<<1)+1] = cs;
-    }
-    /* video interrupts default location */
-    ((CARD16*)0)[(0x42<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x42<<1] = 0xf065;
-    ((CARD16*)0)[(0x10<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x10<<1] = 0xf065;
-    /* video param table default location (int 1d) */
-    ((CARD16*)0)[(0x1d<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1d<<1] = 0xf0A4;
-    /* font tables default location (int 1F) */
-    ((CARD16*)0)[(0x1f<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1f<<1] = 0xfa6e;
-
-    /* int 11 default location */
-    ((CARD16*)0)[(0x11<1)+1] = 0xf000;
-    ((CARD16*)0)[0x11<<1] = 0xf84d;
-    /* int 12 default location */
-    ((CARD16*)0)[(0x12<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x12<<1] = 0xf841;
-    /* int 15 default location */
-    ((CARD16*)0)[(0x15<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x15<<1] = 0xf859;
-    /* int 1A default location */
-    ((CARD16*)0)[(0x1a<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1a<<1] = 0xff6e;
-    /* int 05 default location */
-    ((CARD16*)0)[(0x05<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x05<<1] = 0xff54;
-    /* int 08 default location */
-    ((CARD16*)0)[(0x8<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x8<<1] = 0xfea5;
-    /* int 13 default location (fdd) */
-    ((CARD16*)0)[(0x13<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x13<<1] = 0xec59;
-    /* int 0E default location */
-    ((CARD16*)0)[(0xe<<1)+1] = 0xf000;
-    ((CARD16*)0)[0xe<<1] = 0xef57;
-    /* int 17 default location */
-    ((CARD16*)0)[(0x17<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x17<<1] = 0xefd2;
-    /* fdd table default location (int 1e) */
-    ((CARD16*)0)[(0x1e<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1e<<1] = 0xefc7;
-}
-
-static int
-setup_system_bios(void)
-{
-    char *date = "06/01/99";
-    char *eisa_ident = "PCI/ISA";
-
-#if MAP_SYS_BIOS
-    if (!copy_sys_bios()) return 0;
-    return 1;
-#endif
-/*    memset((void *)0xF0000,0xf4,0xfff7); */
-
-    /*
-     * we trap the "industry standard entry points" to the BIOS
-     * and all other locations by filling them with "hlt"
-     * TODO: implement hlt-handler for these
-     */
-    memset((void *)0xF0000,0xf4,0x10000);
-
-    /*
-     * TODO: we should copy the fdd table (0xfec59-0xfec5b)
-     * the video parameter table (0xf0ac-0xf0fb)
-     * and the font tables (0xfa6e-0xfe6d)
-     * from the original bios here
-     */
-
-    /* set bios date */
-    strcpy((char *)0xFFFF5,date);
-    /* set up eisa ident string */
-    strcpy((char *)0xFFFD9,eisa_ident);
-    /* write system model id for IBM-AT */
-    ((char *)0)[0xFFFFE] = 0xfc;
-
-    return 1;
-}
-
-static int
-chksum(CARD8 *start)
-{
-  CARD16 size;
-  CARD8 val = 0;
-  int i;
-
-  size = *(start+2) * 512;
-  for (i = 0; i<size; i++)
-    val += *(start + i);
-
-  if (!val)
-    return 1;
-
-    fprintf(stderr,"BIOS cksum wrong!\n");
-  return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux b/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux
deleted file mode 100644
index 5dfe306991..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux
+++ /dev/null
@@ -1,59 +0,0 @@
-CFLAGS=-g -I/usr/include -I../../include/ -O0 -Wall
-CC=gcc
-
-.y.c:
-    bison -d -o $@ $<
-.l.c:
-    flex -o$@ $< 
-
-SRCS = main.c io.c x86emu.c int.c pci.c
-OBJS = main.o io.o x86emu.o int.o pci.o
-
-all : vbios.vm86 v86bios.vm86 cbios.vm86 cbios.x86emu vbios.x86emu v86bios.x86emu 
-#all :  cbios.x86emu vbios.x86emu v86bios.x86emu 
-
-parser.c : parser.y
-lex.c : lex.l
-cbios.o : cbios.c v86bios.h debug.h
-main.o : main.c v86bios.h pci.h debug.h
-io.o : v86bios.h AsmMacros.h debug.h
-mem.o : mem.c debug.h v86bios.h
-int.o : int.c v86bios.h debug.h
-pci.o : pci.c pci.h debug.h
-console.o : console.c v86bios.h debug.h
-v86.o : v86.c debug.h
-parser.o : parser.c
-lex.o : lex.c
-v86bios.o: v86bios.c v86bios.h pci.h debug.h
-logging.o: logging.c v86bios.h
-x86emu.o : x86emu.c v86bios.h debug.h
-    $(CC) -c -DX86EMU $(CFLAGS) $*.c
-
-vbios.x86emu : main.o x86emu.o io.o int.o pci.o console.o mem.o logging.o
-    gcc -Wl,-defsym -Wl,printk=lprintf -o vbios.x86emu main.o \
-    x86emu.o io.o int.o pci.o console.o mem.o logging.o \
-    -L../x86emu -lx86emud -lc 
-vbios.vm86 : main.o v86.o io.o int.o pci.o console.o logging.o
-    gcc -o vbios.vm86 main.o v86.o io.o int.o pci.o console.o \
-    logging.o -lc 
-cbios.x86emu : cbios.o x86emu.o io.o int.o pci.o console.o mem.o logging.o
-    gcc -Wl,-defsym -Wl,printk=lprintf -o cbios.x86emu cbios.o \
-    x86emu.o io.o int.o pci.o console.o mem.o logging.o \
-    -L../x86emu -lx86emud -lc 
-cbios.vm86 : cbios.o v86.o io.o int.o pci.o console.o logging.o
-    gcc -o cbios.vm86 cbios.o v86.o io.o int.o pci.o console.o \
-    logging.o -lc 
-v86bios.vm86: command.o parser.o lex.o v86bios.o v86.o io.o int.o pci.o console.o logging.o
-     gcc -o v86bios.vm86 command.o parser.o lex.o v86bios.o v86.o io.o \
-     int.o pci.o console.o logging.o -L/usr/lib/curses -lfl \
-     -lreadline -lc -lncurses /usr/lib/libc.a
-v86bios.x86emu: command.o parser.o lex.o v86bios.o x86emu.o io.o int.o pci.o console.o logging.o
-    gcc -Wl,-defsym -Wl,printk=lprintf -o v86bios.x86emu \
-    command.o parser.o lex.o v86bios.o x86emu.o io.o \
-    int.o pci.o console.o logging.o -L/usr/lib/curses -lfl \
-    -lreadline -lc -lncurses  /usr/lib/libc.a -L../x86emu -lx86emud
-
-clean:
-    rm -f *.o vbios.x86emu vbios.vm86 cbios.x86emu cbios.vm86 parser.c \
-    lex.c parser.h v86bios.x86emu v86bios.vm86
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/mem.c b/board/MAI/bios_emulator/scitech/src/v86bios/mem.c
deleted file mode 100644
index 6b8e2e6123..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/mem.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#include "v86bios.h"
-#include "x86emu.h"
-
-#ifdef __alpha__
-
-void* vram_map = 0;
-int sparse_shift = 5;
-
-#define mem_barrier()        __asm__ __volatile__("mb"  : : : "memory")
-
-#define vuip    volatile unsigned int *
-
-CARD8
-mem_rb(CARD32 addr)
-{
-  unsigned long result, shift;
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    shift = (addr & 0x3) * 8;
-    result = *(vuip) ((unsigned long)vram_map + (addr << sparse_shift));
-    result >>= shift;
-    return 0xffUL & result;
-  } else
-    return rdb(addr);
-}
-
-CARD16
-mem_rw(CARD32 addr)
-{
-  unsigned long result, shift;
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    shift = (addr & 0x2) * 8;
-    result = *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
-	     +(1<<(sparse_shift-2)));
-    result >>= shift;
-    return 0xffffUL & result;
-  } else
-    return rdw(addr);
-}
-
-CARD32
-mem_rl(CARD32 addr)
-{
-  unsigned long result;
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    result = *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)+(3<<(sparse_shift-2)));
-    return result;
-  } else
-    return rdl(addr);
-}
-
-void
-mem_wb(CARD32 addr, CARD8 val)
-{
-    unsigned int b = val & 0xffU;
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    *(vuip) ((unsigned long)vram_map + (addr << sparse_shift)) = b * 0x01010101;
-    mem_barrier();
-  } else
-    wrb(addr,val);
-}
-
-void
-mem_ww(CARD32 addr, CARD16 val)
-{
-  unsigned int w = val & 0xffffU;
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
-	+(1<<(sparse_shift-2))) = w * 0x00010001;
-    mem_barrier();
-  } else
-    wrw(addr,val);
-}
-
-void
-mem_wl(CARD32 addr, CARD32 val)
-{
-  if (addr >= 0xA0000 && addr <= 0xBFFFF) {
-    addr -= 0xA0000;
-    *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
-	+(3<<(sparse_shift-2))) = val;
-    mem_barrier();
-  } else
-    wrl(addr,val);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/parser.y b/board/MAI/bios_emulator/scitech/src/v86bios/parser.y
deleted file mode 100644
index 21c4023dcd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/parser.y
+++ /dev/null
@@ -1,498 +0,0 @@
-%{
-#include <malloc.h>
-#include <string.h>
-#include "v86bios.h"
-#include "pci.h"
-    
-#define YYSTYPE unsigned long
-    
-#define MAX_VAR 0x20
-
-    CARD32 var[MAX_VAR];
-    CARD32 var_mem;
-
-
-i86biosRegs regs = { 00 };
-
-enum mem_type { BYTE, WORD, LONG, STRING };
-union mem_val {
-   CARD32 integer;
-   char *ptr;
-} rec;
-
-struct mem {
-    enum mem_type type;
-        union mem_val val;
-    struct mem *next;
-}; 
-
- 
-struct device Device = {FALSE,NONE,{0}};
-
-extern void yyerror(char *s);
-extern int yylex( void  );
- 
-static void boot(void);
-static void dump_mem(CARD32 addr, int len);
-static void exec_int(int num);
-static void *add_to_list(enum mem_type type, union mem_val *rec, void *next);
-static void do_list(struct mem *list, memType addr);
-static char * normalize_string(char *ptr);
-%}
-
-%token TOK_NUM
-%token TOK_REG_AX
-%token TOK_REG_BX
-%token TOK_REG_CX
-%token TOK_REG_DX
-%token TOK_REG_DI
-%token TOK_REG_SI
-%token TOK_SEG_DS
-%token TOK_SEG_ES
-%token TOK_SEP
-%token TOK_VAR
-%token TOK_VAR_MEM
-%token TOK_COMMAND_BOOT
-%token TOK_COMMAND_EXEC
-%token TOK_SELECT
-%token TOK_STRING
-%token TOK_MODIFIER_BYTE
-%token TOK_MODIFIER_WORD
-%token TOK_MODIFIER_LONG
-%token TOK_MODIFIER_MEMSET
-%token TOK_COMMAND_MEMSET
-%token TOK_COMMAND_MEMDUMP
-%token TOK_COMMAND_QUIT
-%token TOK_ERROR
-%token TOK_END
-%token TOK_ISA
-%token TOK_PCI
-%token TOK_BYTE
-%token TOK_WORD
-%token TOK_LONG
-%token TOK_PRINT_PORT
-%token TOK_IOSTAT
-%token TOK_PRINT_IRQ
-%token TOK_PPCI
-%token TOK_PIP
-%token TOK_TRACE
-%token TOK_ON
-%token TOK_OFF
-%token TOK_VERBOSE
-%token TOK_LOG
-%token TOK_LOGOFF
-%token TOK_CLSTAT
-%token TOK_STDOUT
-%token TOK_HLT
-%token TOK_DEL
-%token TOK_IOPERM
-%token TOK_DUMP_PCI
-%token TOK_BOOT_BIOS
-%%
-input:        | input line  
-line:          end |  com_reg | com_var | com_select
-              | com_boot | com_memset | com_memdump  | com_quit 
-              | com_exec | hlp | config | verbose | logging | print | clstat 
-              | com_hlt | ioperm | list_pci | boot_bios 
-              | error end  { printf("unknown command\n"); }
-;
-end:           TOK_END
-;
-com_reg:        reg_off val end { *(CARD16*)$1 = $2 & 0xffff; }
-              | reg_seg TOK_SEP reg_off val end {
-                               *(CARD16*)$1 = ($4 & 0xf0000) >> 4;
-                                       *(CARD16*)$3 = ($4 & 0x0ffff);
-                                        }
-              |  reg_off '?' end { printf("0x%x\n",*(CARD16*)$1);}
-              |  reg_seg TOK_SEP reg_off '?' end
-                                     { printf("0x%x:0x%x\n",*(CARD16*)$1,
-                          *(CARD16*)$3); }
-;
-register_read:  reg_seg TOK_SEP reg_off { $$ = (((*(CARD16*)$1) << 4) 
-                                                | ((*(CARD16*)$3) & 0xffff));
-                                        }
-              | reg_off          { $$ = ((*(CARD16*)$1) & 0xffff); }
-;
-reg_off:        TOK_REG_AX  { $$ = (unsigned long)&(regs.ax); }
-              | TOK_REG_BX  { $$ = (unsigned long)&(regs.bx); }
-              | TOK_REG_CX  { $$ = (unsigned long)&(regs.cx); }
-              | TOK_REG_DX  { $$ = (unsigned long)&(regs.dx); }
-              | TOK_REG_DI  { $$ = (unsigned long)&(regs.di); }
-              | TOK_REG_SI  { $$ = (unsigned long)&(regs.si); }
-;
-reg_seg:        TOK_SEG_DS  { $$ = (unsigned long)&(regs.ds); }
-              | TOK_SEG_ES  { $$ = (unsigned long)&(regs.es); }
-;
-com_var:        TOK_VAR_MEM '?' end { printf("var mem: 0x%x\n",var_mem); }
-          | TOK_VAR '?' end { if ($1 < MAX_VAR)
-          printf("var[%i]: 0x%x\n",(int)$1,var[$1]);
-          else
-          printf("var index %i out of range\n",(int)$1); }
-          | TOK_VAR_MEM val end { var_mem = $2; }    
-              | TOK_VAR val end    { if ($1 <= MAX_VAR)
-                                 var[$1] = $2;
-                              else 
-                                     printf("var index %i out of range\n",(int)$1); }
-              | TOK_VAR error  end { printf("$i val\n"); }
-              | TOK_VAR_MEM error  end { printf("$i val\n"); }
-;
-com_boot:       TOK_COMMAND_BOOT  end { boot(); }
-                TOK_COMMAND_BOOT error end { boot(); }
-;
-com_select:     TOK_SELECT TOK_ISA end { Device.booted = FALSE;
-                                         Device.type = ISA;
-                     CurrentPci = NULL; }   
-              | TOK_SELECT TOK_PCI val TOK_SEP val TOK_SEP val end
-                                    { Device.booted = FALSE;
-                      Device.type = PCI; 
-                                      Device.loc.pci.bus = $3;
-                                      Device.loc.pci.dev = $5; 
-                                      Device.loc.pci.func = $7; }
-              | TOK_SELECT '?' end
-                                   { switch (Device.type) {
-                                     case ISA:
-                                       printf("isa\n");
-                                       break;
-                                     case PCI:
-                                      printf("pci: %x:%x:%x\n",Device.loc.pci.bus,
-                                              Device.loc.pci.dev,
-                          Device.loc.pci.func);
-                                      break;
-                                 default:
-                                      printf("no device selected\n");
-                                      break;
-                                     }
-                                    }
-              | TOK_SELECT error end { printf("select ? | isa "
-                                         "| pci:bus:dev:func\n"); }
-;
-com_quit:       TOK_COMMAND_QUIT end { return 0; }
-              | TOK_COMMAND_QUIT error end { logoff(); return 0; }
-;
-com_exec:       TOK_COMMAND_EXEC end { exec_int(0x10); }
-          | TOK_COMMAND_EXEC val end { exec_int($2); }
-          | TOK_COMMAND_EXEC error end { exec_int(0x10); }
-;
-com_memdump:    TOK_COMMAND_MEMDUMP val val end { dump_mem($2,$3); }
-              | TOK_COMMAND_MEMDUMP  error  end { printf("memdump start len\n"); }
-
-    
-;
-com_memset:     TOK_COMMAND_MEMSET val list end { do_list((struct mem*)$3,$2);}
-              | TOK_COMMAND_MEMSET error end { printf("setmem addr [byte val] "
-                                                   "[word val] [long val] "
-                                                   "[\"string\"]\n"); }
-;
-list:                              { $$ = 0; } 
-              | TOK_BYTE val list { rec.integer = $2;
-          $$ = (unsigned long)add_to_list(BYTE,&rec,(void*)$3); }
-              | TOK_WORD val list { rec.integer = $2; 
-          $$ = (unsigned long) add_to_list(WORD,&rec,(void*)$3); }
-              | TOK_LONG val list { rec.integer = $2; 
-          $$ = (unsigned long) add_to_list(LONG,&rec,(void*)$3); }
-              | TOK_STRING list { rec.ptr = (void*)$1; 
-          $$ = (unsigned long) add_to_list(STRING,&rec,(void*)$2); }
-;
-val:            TOK_VAR  {  if ($1 > MAX_VAR) {
-                             printf("variable index out of range\n");
-                             $$=0;
-                             } else 
-                            $$ = var[$1]; } 
-              | TOK_NUM  {  $$ = $1; }
-              | register_read
-; 
-bool:           TOK_ON   {  $$ = 1; }
-              | TOK_OFF  {  $$ = 0; }
-;
-config:         TOK_PRINT_PORT bool end { Config.PrintPort = $2; } 
-              | TOK_PRINT_PORT '?' end  { printf("print port %s\n",
-                                      Config.PrintPort?"on":"off"); }
-          | TOK_PRINT_PORT error end { printf("pport on | off | ?\n") } 
-              | TOK_PRINT_IRQ bool end  { Config.PrintIrq = $2; } 
-              | TOK_PRINT_IRQ '?' end   { printf("print irq %s\n",  
-                                          Config.PrintIrq?"on":"off"); } 
-          | TOK_PRINT_IRQ error end { printf("pirq on | off | ?\n") } 
-              | TOK_PPCI bool end       { Config.PrintPci = $2; } 
-              | TOK_PPCI '?' end        { printf("print PCI %s\n",
-                                          Config.PrintPci?"on":"off"); } 
-          | TOK_PPCI error end      { printf("ppci on | off | ?\n") } 
-              | TOK_PIP bool end        { Config.PrintIp = $2; } 
-              | TOK_PIP '?' end         { printf("printip %s\n",
-                                      Config.PrintIp?"on":"off"); } 
-          | TOK_PIP error end       { printf("pip on | off | ?\n") } 
-              | TOK_IOSTAT bool end     { Config.IoStatistics = $2; } 
-              | TOK_IOSTAT '?' end      { printf("io statistics %s\n",
-                                      Config.IoStatistics?"on":"off"); } 
-          | TOK_IOSTAT error end    { printf("iostat on | off | ?\n") } 
-              | TOK_TRACE bool end      { Config.Trace = $2; } 
-              | TOK_TRACE '?' end       { printf("trace %s\n",
-                                      Config.Trace ?"on":"off"); } 
-          | TOK_TRACE error end { printf("trace on | off | ?\n") } 
-;
-verbose:        TOK_VERBOSE val end     { Config.Verbose = $2; }
-          | TOK_VERBOSE '?' end     { printf("verbose: %i\n",
-                            Config.Verbose); }
-          | TOK_VERBOSE error end   { printf("verbose val | ?\n"); }
-;
-logging:        TOK_LOG TOK_STRING end  { logon(normalize_string((char*)$2)); }
-          | TOK_LOG '?' end         { if (logging) printf("logfile: %s\n",
-                            logfile);
-                      else printf("no logging\n?"); }
-          | TOK_LOG TOK_OFF end          { logoff(); }
-          | TOK_LOG error end       { printf("log \"<filename>\" | ? |"
-                         " off\n"); }
-;
-clstat:         TOK_CLSTAT end          { clear_stat(); }
-          | TOK_CLSTAT error end    { printf("clstat\n"); } 
-;
-print:          TOK_STDOUT bool end     { nostdout = !$2; }
-                  | TOK_STDOUT '?' end      { printf("print %s\n",nostdout ?
-                        "no":"yes"); }
-          | TOK_STDOUT error end    { printf("print on | off\n"); }
-;
-com_hlt:            TOK_HLT val end         { add_hlt($2); }    
-          | TOK_HLT TOK_DEL val end { del_hlt($3); }
-          | TOK_HLT TOK_DEL end     { del_hlt(21); }
-              | TOK_HLT '?' end         { list_hlt(); }
-          | TOK_HLT error end       { printf(
-                                               "hlt val | del [val] | ?\n"); }
-;
-ioperm:         TOK_IOPERM val val val end { int i,max;
-                                             if ($2 >= 0) {
-                                 max = $2 + $3 - 1;
-                             if (max > IOPERM_BITS) 
-                             max = IOPERM_BITS;
-                                 for (i = $2;i <= max; i++)
-                                ioperm_list[i] 
-                                                                = $4>0 ? 1 : 0;
-                          }
-                                           }
-          | TOK_IOPERM '?' end { int i,start;
-                     for (i=0; i <= IOPERM_BITS; i++) {
-                    if (ioperm_list[i]) {
-                       start = i;
-                       for (; i <= IOPERM_BITS; i++) 
-                        if (!ioperm_list[i]) {
-                         printf("ioperm on in "
-                         "0x%x+0x%x\n", start,i-start);
-                         break;
-                        }
-                         }
-                     }
-                                  }
-          | TOK_IOPERM error end { printf("ioperm start len val\n"); }
-;
-list_pci:      TOK_DUMP_PCI end       { list_pci(); }
-             | TOK_DUMP_PCI error end { list_pci(); }
-;
-boot_bios:     TOK_BOOT_BIOS '?' end { if (!BootBios) printf("No Boot BIOS\n");
-                                   else printf("BootBIOS from: %i:%i:%i\n",
-                           BootBios->bus, BootBios->dev,
-                           BootBios->func); }
-             | TOK_BOOT_BIOS error end { printf ("bootbios bus:dev:num\n"); }
-;
-hlp:         '?'  { printf("Command list:\n");
-                    printf(" select isa | pci bus:dev:func\n");
-            printf(" boot\n");
-            printf(" seg:reg val | reg val \n");
-            printf(" $x val | $mem val\n");
-            printf(" setmem addr list; addr := val\n");
-            printf(" dumpmem addr len; addr,len := val\n");
-            printf(" do [val]\n");
-            printf(" quit\n");
-            printf(" ?\n");
-            printf(" seg := ds | es;"
-               " reg := ax | bx | cx | dx | si \n");
-            printf(" val := var | <hex-number> | seg:reg | seg\n");
-            printf(" var := $x | $mem; x := 0..20\n");
-            printf(" list := byte val | word val | long val "
-               "| \"string\"\n");
-                printf(" pport on | off | ?\n");
-                printf(" ppci on | off | ?\n");
-                printf(" pirq on | off | ?\n");
-                printf(" pip on | off | ?\n");
-                printf(" trace on | off | ?\n");
-                printf(" iostat on | off | ?\n");
-            printf(" verbose val\n");
-            printf(" log \"<filename>\" | off | ?\n");
-            printf(" print on | off\n");
-            printf(" hlt val | del [val] | ?\n");
-            printf(" clstat\n");
-            printf(" lpci\n");
-            printf ("bootbios ?\n");
-}
-;
-
-%%
-
-static void
-dump_mem(CARD32 addr, int len)
-{
-    dprint(addr,len);
-}
-
-static void
-exec_int(int num)
-{
-    if (num == 0x10) {  /* video interrupt */
-    if (Device.type == NONE) {
-        CurrentPci = PciList;
-        while (CurrentPci) {
-        if (CurrentPci->active)
-            break;
-        CurrentPci = CurrentPci->next;
-        }
-        if (!CurrentPci)
-        Device.type = ISA;
-        else {
-        Device.type = PCI;
-        Device.loc.pci.dev = CurrentPci->dev;
-        Device.loc.pci.bus = CurrentPci->bus;
-        Device.loc.pci.func = CurrentPci->func;
-        }
-    }
-        if (Device.type != ISA) {
-       if (!Device.booted) {
-              if (!CurrentPci || (Device.type == PCI
-               && (!CurrentPci->active
-                   && (Device.loc.pci.dev != CurrentPci->dev
-                 || Device.loc.pci.bus != CurrentPci->bus
-                 || Device.loc.pci.func != CurrentPci->func)))) {
-                printf("boot the device fist\n");
-            return;
-          }
-           }
-    } else
-       CurrentPci = NULL;
-    } else {
-    Device.booted = FALSE; /* we need this for sanity! */
-    }
-    
-    runINT(num,&regs);
-}
-
-static void
-boot(void)
-{
-    if (Device.type == NONE) {
-    printf("select a device fist\n");
-    return;
-    }
-    
-    call_boot(&Device);
-}
-
-static void *
-add_to_list(enum mem_type type, union mem_val *rec, void *next)
-{
-    struct mem *mem_rec = (struct mem *) malloc(sizeof(mem_rec));
-
-    mem_rec->type = type;
-    mem_rec->next = next;
-    
-    switch (type) {
-    case BYTE:
-    case WORD:
-    case LONG:
-    mem_rec->val.integer = rec->integer;
-       break;
-    case STRING:
-    mem_rec->val.ptr = normalize_string(rec->ptr);
-    break;
-    }
-    return mem_rec;
-}
-
-static int
-validRange(int addr,int len)
-{
-    int end = addr + len;
-
-    if (addr < 0x1000 || end > 0xc0000)
-    return 0;
-    return 1;
-}
-
-static void
-do_list(struct mem *list, memType addr)
-{
-   struct mem *prev;
-   int len;
-   
-   while (list) {
-    switch (list->type) {
-         case BYTE:
-         if (!validRange(addr,1)) goto error;
-         *(CARD8*)addr = list->val.integer;
-         addr =+ 1;
-             break;     
-         case WORD:
-         if (!validRange(addr,2)) goto error;
-         *(CARD16*)addr = list->val.integer;
-         addr =+ 2;
-             break;     
-         case LONG:
-         if (!validRange(addr,4)) goto error;
-         *(CARD32*)addr = list->val.integer;
-         addr =+ 4;
-             break;
-         case STRING:
-         len = strlen((char*)list->val.ptr);
-         if (!validRange(addr,len)) goto error;
-         memcpy((CARD8*)addr,(void*)list->val.ptr,len);
-         addr =+ len;
-             free(list->val.ptr);
-             break;
-       }     
-       prev = list;
-       list = list->next;
-       free(prev);
-       continue;
-   error:
-       printf("address out of range\n");
-       while (list) {
-       prev = list;
-       list = list->next;
-       free(prev);
-       }
-       break;
-   }
-}
-
-static char *
-normalize_string(char *ptr)
-{
-    int i = 0, j = 0, c = 0, esc= 0;
-    int size;
-    char *mem_ptr;
-    
-    size = strlen(ptr);
-    mem_ptr = malloc(size);
-    while (1) {
-        switch (*(ptr + i)) {
-        case '\\':
-            if (esc) {
-                *(mem_ptr + j++) = *(ptr + i);
-                esc = 0;
-            } else 
-                esc = 1;
-            break;
-        case '\"':
-            if (esc) {
-                *(mem_ptr + j++) = *(ptr + i);
-                esc = 0;
-            } else 
-                c++;
-            break;
-        default:
-            *(mem_ptr + j++) = *(ptr + i);
-            break;
-        }
-        if (c > 1) {
-            *(mem_ptr + j) = '\0';     
-            break;
-        }
-        i++;
-    }
-    return mem_ptr;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/pci.c b/board/MAI/bios_emulator/scitech/src/v86bios/pci.c
deleted file mode 100644
index b58a57195f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/pci.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#include <fcntl.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#if defined (__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-#include "AsmMacros.h"
-
-#include "pci.h"
-
-/*
- * I'm rather simple mindend - therefore I do a poor man's
- * pci scan without all the fancy stuff that is done in
- * scanpci. However that's all we need.
- */
-
-PciStructPtr PciStruct = NULL;
-PciBusPtr PciBuses = NULL;
-PciStructPtr CurrentPci = NULL;
-PciStructPtr PciList = NULL;
-PciStructPtr BootBios = NULL;
-int pciMaxBus = 0;
-
-static CARD32 PciCfg1Addr;
-
-static void readConfigSpaceCfg1(CARD32 bus, CARD32 dev, CARD32 func,
-		CARD32 *reg);
-static int checkSlotCfg1(CARD32 bus, CARD32 dev, CARD32 func);
-static int checkSlotCfg2(CARD32 bus, int dev);
-static void readConfigSpaceCfg2(CARD32 bus, int dev, CARD32 *reg);
-static CARD8 interpretConfigSpace(CARD32 *reg, int busidx,
-		  CARD8 dev, CARD8 func);
-static CARD32 findBIOSMap(PciStructPtr pciP, CARD32 *biosSize);
-static void restoreMem(PciStructPtr pciP);
-
-
-#ifdef __alpha__
-#define PCI_BUS_FROM_TAG(tag)  (((tag) & 0x00ff0000) >> 16)
-#define PCI_DFN_FROM_TAG(tag) (((tag) & 0x0000ff00) >> 8)
-
-#include <asm/unistd.h>
-
-CARD32
-axpPciCfgRead(CARD32 tag)
-{
-    int bus, dfn;
-    CARD32 val = 0xffffffff;
-
-    bus = PCI_BUS_FROM_TAG(tag);
-    dfn = PCI_DFN_FROM_TAG(tag);
-
-    syscall(__NR_pciconfig_read, bus, dfn, tag & 0xff, 4, &val);
-    return(val);
-}
-
-void
-axpPciCfgWrite(CARD32 tag, CARD32 val)
-{
-    int bus, dfn;
-
-    bus = PCI_BUS_FROM_TAG(tag);
-    dfn = PCI_DFN_FROM_TAG(tag);
-
-    syscall(__NR_pciconfig_write, bus, dfn, tag & 0xff, 4, &val);
-}
-
-static CARD32 (*readPci)(CARD32 reg) = axpPciCfgRead;
-static void (*writePci)(CARD32 reg, CARD32 val) = axpPciCfgWrite;
-#else
-static CARD32 readPciCfg1(CARD32 reg);
-static void writePciCfg1(CARD32 reg, CARD32 val);
-static CARD32 readPciCfg2(CARD32 reg);
-static void writePciCfg2(CARD32 reg, CARD32 val);
-
-static CARD32 (*readPci)(CARD32 reg) = readPciCfg1;
-static void (*writePci)(CARD32 reg, CARD32 val) = writePciCfg1;
-#endif
-
-#if defined(__alpha__) || defined(__sparc__)
-#define PCI_EN 0x00000000
-#else
-#define PCI_EN 0x80000000
-#endif
-
-
-static int numbus;
-static int hostbridges = 1;
-static unsigned long pciMinMemReg = ~0;
-
-
-void
-scan_pci(void)
-{
-    unsigned short configtype;
-
-    CARD32 reg[64];
-    int busidx;
-    CARD8 cardnum;
-    CARD8 func;
-    int idx;
-
-    int i;
-    PciStructPtr pci1;
-    PciBusPtr pci_b1,pci_b2;
-
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc__) || defined(__ia64__)
-    configtype = 1;
-#else
-    CARD8 tmp1, tmp2;
-    CARD32 tmp32_1, tmp32_2;
-    outb(PCI_MODE2_ENABLE_REG, 0x00);
-    outb(PCI_MODE2_FORWARD_REG, 0x00);
-    tmp1 = inb(PCI_MODE2_ENABLE_REG);
-    tmp2 = inb(PCI_MODE2_FORWARD_REG);
-    if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
-	configtype = 2;
-	readPci = readPciCfg2;
-	writePci = writePciCfg2;
-	P_printf("PCI says configuration type 2\n");
-    } else {
-	tmp32_1 = inl(PCI_MODE1_ADDRESS_REG);
-	outl(PCI_MODE1_ADDRESS_REG, PCI_EN);
-	tmp32_2 = inl(PCI_MODE1_ADDRESS_REG);
-	outl(PCI_MODE1_ADDRESS_REG, tmp32_1);
-	if (tmp32_2 == PCI_EN) {
-	    configtype = 1;
-	    P_printf("PCI says configuration type 1\n");
-	} else {
-	    P_printf("No PCI !\n");
-	    return;
-	}
-    }
-#endif
-
-    if (configtype == 1) {
-	P_printf("PCI probing configuration type 1\n");
-	busidx = 0;
-	numbus = 1;
-	idx = 0;
-	do {
-	    P_printf("\nProbing for devices on PCI bus %d:\n", busidx);
-	    for (cardnum = 0; cardnum < MAX_DEV_PER_VENDOR_CFG1; cardnum++) {
-		func = 0;
-		do {
-		    /* loop over the different functions, if present */
-		    if (!checkSlotCfg1(busidx,cardnum,func))
-			break;
-		    readConfigSpaceCfg1(busidx,cardnum,func,reg);
-
-		    func = interpretConfigSpace(reg,busidx,
-						cardnum,func);
-
-		    if (idx++ > MAX_PCI_DEVICES)
-			continue;
-		} while (func < 8);
-	    }
-	} while (++busidx < PCI_MAXBUS);
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc__) || defined(__ia64__)
-	/* don't use outl()  ;-) */
-#else
-	outl(PCI_MODE1_ADDRESS_REG, 0);
-#endif
-    } else {
-	int slot;
-
-	P_printf("PCI probing configuration type 2\n");
-	busidx = 0;
-	numbus = 1;
-	idx = 0;
-	do {
-	    for (slot=0xc0; slot<0xd0; i++) {
-		if (!checkSlotCfg2(busidx,slot))
-		    break;
-		readConfigSpaceCfg2(busidx,slot,reg);
-
-		interpretConfigSpace(reg,busidx,
-				     slot,0);
-		if (idx++ > MAX_PCI_DEVICES)
-		    continue;
-	    }
-	}  while (++busidx < PCI_MAXBUS);
-    }
-
-
-    pciMaxBus = numbus - 1;
-    P_printf("Number of buses in system: %i\n",pciMaxBus + 1);
-    P_printf("Min PCI mem address: 0x%lx\n",pciMinMemReg);
-
-    /* link buses */
-    pci_b1 = PciBuses;
-    while (pci_b1) {
-	pci_b2 = PciBuses;
-	pci_b1->pBus = NULL;
-	while (pci_b2) {
-	    if (pci_b1->primary == pci_b2->secondary)
-		pci_b1->pBus = pci_b2;
-	    pci_b2 = pci_b2->next;
-	}
-	pci_b1 = pci_b1->next;
-    }
-    pci1 = PciStruct;
-    while (pci1) {
-	pci_b2 = PciBuses;
-	pci1->pBus = NULL;
-	while (pci_b2) {
-	    if (pci1->bus == pci_b2->secondary)
-		pci1->pBus = pci_b2;
-	    pci_b2 = pci_b2->next;
-	}
-	pci1 = pci1->next;
-    }
-    if (RESORT) {
-	PciStructPtr tmp = PciStruct, tmp1;
-	PciStruct = NULL;
-	while (tmp) {
-	    tmp1 = tmp->next;
-	    tmp->next = PciStruct;
-	    PciStruct = tmp;
-	    tmp = tmp1;
-	}
-    }
-    PciList = CurrentPci = PciStruct;
-}
-
-#ifndef __alpha__
-static CARD32
-readPciCfg1(CARD32 reg)
-{
-    CARD32 val;
-
-    outl(PCI_MODE1_ADDRESS_REG, reg);
-    val = inl(PCI_MODE1_DATA_REG);
-    outl(PCI_MODE1_ADDRESS_REG, 0);
-    P_printf("reading: 0x%x from 0x%x\n",val,reg);
-    return val;
-}
-
-static void
-writePciCfg1(CARD32 reg, CARD32 val)
-{
-    P_printf("writing: 0x%x to 0x%x\n",val,reg);
-    outl(PCI_MODE1_ADDRESS_REG, reg);
-    outl(PCI_MODE1_DATA_REG,val);
-    outl(PCI_MODE1_ADDRESS_REG, 0);
-}
-
-static CARD32
-readPciCfg2(CARD32 reg)
-{
-    CARD32 val;
-    CARD8 bus = (reg >> 16) & 0xff;
-    CARD8 dev = (reg >> 11) & 0x1f;
-    CARD8 num = reg & 0xff;
-
-    outb(PCI_MODE2_ENABLE_REG, 0xF1);
-    outb(PCI_MODE2_FORWARD_REG, bus);
-    val = inl((dev << 8) + num);
-    outb(PCI_MODE2_ENABLE_REG, 0x00);
-    P_printf("reading: 0x%x from 0x%x\n",val,reg);
-    return val;
-}
-
-static void
-writePciCfg2(CARD32 reg, CARD32 val)
-{
-    CARD8 bus = (reg >> 16) & 0xff;
-    CARD8 dev = (reg >> 11) & 0x1f;
-    CARD8 num = reg & 0xff;
-
-    P_printf("writing: 0x%x to 0x%x\n",val,reg);
-    outb(PCI_MODE2_ENABLE_REG, 0xF1);
-    outb(PCI_MODE2_FORWARD_REG, bus);
-    outl((dev << 8) + num,val);
-    outb(PCI_MODE2_ENABLE_REG, 0x00);
-}
-#endif
-
-void
-pciVideoDisable(void)
-{
-    /* disable VGA routing on bridges */
-    PciBusPtr pbp = PciBuses;
-    PciStructPtr pcp = PciStruct;
-
-    while (pbp) {
-	writePci(pbp->Slot.l | 0x3c, pbp->bctl & ~(CARD32)(8<<16));
-	pbp = pbp->next;
-    }
-    /* disable display devices */
-    while (pcp) {
-	writePci(pcp->Slot.l | 0x04, pcp->cmd_st & ~(CARD32)3);
-	writePci(pcp->Slot.l | 0x30, pcp->RomBase & ~(CARD32)1);
-	pcp = pcp->next;
-    }
-}
-
-void
-pciVideoRestore(void)
-{
-    /* disable VGA routing on bridges */
-    PciBusPtr pbp = PciBuses;
-    PciStructPtr pcp = PciStruct;
-
-    while (pbp) {
-	writePci(pbp->Slot.l | 0x3c, pbp->bctl);
-	pbp = pbp->next;
-    }
-    /* disable display devices */
-    while (pcp) {
-	writePci(pcp->Slot.l | 0x04, pcp->cmd_st);
-	writePci(pcp->Slot.l | 0x30, pcp->RomBase);
-	pcp = pcp->next;
-    }
-}
-
-void
-EnableCurrent()
-{
-    PciBusPtr pbp;
-    PciStructPtr pcp = CurrentPci;
-
-    pciVideoDisable();
-
-    pbp = pcp->pBus;
-    while (pbp) { /* enable bridges */
-	writePci(pbp->Slot.l | 0x3c, pbp->bctl | (CARD32)(8<<16));
-	pbp = pbp->pBus;
-    }
-    writePci(pcp->Slot.l | 0x04, pcp->cmd_st | (CARD32)3);
-    writePci(pcp->Slot.l | 0x30, pcp->RomBase | (CARD32)1);
-}
-
-CARD8
-PciRead8(int offset, CARD32 Slot)
-{
-    int shift = offset & 0x3;
-    offset = offset & 0xFC;
-    return ((readPci(Slot | offset) >> (shift << 3)) & 0xff);
-}
-
-CARD16
-PciRead16(int offset, CARD32 Slot)
-{
-    int shift = offset & 0x2;
-    offset = offset & 0xFC;
-    return ((readPci(Slot | offset) >> (shift << 3)) & 0xffff);
-}
-
-CARD32
-PciRead32(int offset, CARD32 Slot)
-{
-    offset = offset & 0xFC;
-    return (readPci(Slot | offset));
-}
-
-void
-PciWrite8(int offset, CARD8 byte, CARD32 Slot)
-{
-    CARD32 val;
-    int shift = offset & 0x3;
-    offset = offset & 0xFC;
-    val = readPci(Slot | offset);
-    val &= ~(CARD32)(0xff << (shift << 3));
-    val |= byte << (shift << 3);
-    writePci(Slot | offset, val);
-}
-
-void
-PciWrite16(int offset, CARD16 word, CARD32 Slot)
-{
-    CARD32 val;
-    int shift = offset & 0x2;
-    offset = offset & 0xFC;
-    val = readPci(Slot | offset);
-    val &= ~(CARD32)(0xffff << (shift << 3));
-    val |= word << (shift << 3);
-    writePci(Slot | offset, val);
-}
-
-void
-PciWrite32(int offset, CARD32 lg, CARD32 Slot)
-{
-    offset = offset & 0xFC;
-    writePci(Slot | offset, lg);
-}
-
-int
-mapPciRom(PciStructPtr pciP)
-{
-    unsigned long RomBase = 0;
-    int mem_fd;
-    unsigned char *mem, *ptr;
-    unsigned char *scratch = NULL;
-    int length = 0;
-    CARD32 biosSize = 0x1000000;
-    CARD32 enablePci;
-
-    if (!pciP)
-      pciP = CurrentPci;
-
-    if (FIX_ROM) {
-	RomBase = findBIOSMap(pciP, &biosSize);
-	if (!RomBase) {
-	    fprintf(stderr,"Cannot remap BIOS of %i:%i:%i "
-		    "- trying preset address\n",pciP->bus,pciP->dev,
-		    pciP->func);
-	    RomBase = pciP->RomBase & ~(CARD32)0xFF;
-	}
-    }  else {
-	RomBase = pciP->RomBase & ~(CARD32)0xFF;
-	if (~RomBase + 1 < biosSize || !RomBase)
-	    RomBase = findBIOSMap(pciP, &biosSize);
-    }
-
-    P_printf("RomBase: 0x%lx\n",RomBase);
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	restoreMem(pciP);
-	return (0);
-    }
-
-    PciWrite32(0x30,RomBase | 1,pciP->Slot.l);
-
-#ifdef __alpha__
-    mem = ptr = (unsigned char *)mmap(0, biosSize, PROT_READ,
-				      MAP_SHARED, mem_fd, RomBase | _bus_base());
-#else
-    mem = ptr = (unsigned char *)mmap(0, biosSize, PROT_READ,
-				      MAP_SHARED, mem_fd, RomBase);
-#endif
-    if (pciP != CurrentPci) {
-      enablePci = PciRead32(0x4,pciP->Slot.l);
-      PciWrite32(0x4,enablePci | 0x2,pciP->Slot.l);
-    }
-
-#ifdef PRINT_PCI
-    dprint((unsigned long)ptr,0x30);
-#endif
-    while ( *ptr == 0x55 && *(ptr+1) == 0xAA) {
-	unsigned short data_off = *(ptr+0x18) | (*(ptr+0x19)<< 8);
-	unsigned char *data = ptr + data_off;
-	unsigned char type;
-	int i;
-
-	if (*data!='P' || *(data+1)!='C' || *(data+2)!='I' || *(data+3)!='R') {
-	    break;
-	}
-	type = *(data + 0x14);
-	P_printf("data segment in BIOS: 0x%x, type: 0x%x ",data_off,type);
-
-	if (type != 0)  { /* not PC-AT image: find next one */
-	    unsigned int image_length;
-	    unsigned char indicator = *(data + 0x15);
-	    if (indicator & 0x80) /* last image */
-		break;
-	    image_length = (*(data + 0x10)
-			    | (*(data + 0x11) << 8)) << 9;
-	    P_printf("data image length: 0x%x, ind: 0x%x\n",
-		     image_length,indicator);
-	    ptr = ptr + image_length;
-	    continue;
-	}
-	/* OK, we have a PC Image */
-	length = (*(ptr + 2) << 9);
-	P_printf("BIOS length: 0x%x\n",length);
-	scratch = (unsigned char *)malloc(length);
-	/* don't use memcpy() here: Reading from bus! */
-	for (i=0;i<length;i++)
-	    *(scratch + i)=*(ptr + i);
-	break;
-    }
-
-    if (pciP != CurrentPci)
-      PciWrite32(0x4,enablePci,pciP->Slot.l);
-
-    /* unmap/close/disable PCI bios mem */
-    munmap(mem, biosSize);
-    close(mem_fd);
-    /* disable and restore mapping */
-    writePci(pciP->Slot.l | 0x30, pciP->RomBase & ~(CARD32)1);
-
-    if (scratch && length) {
-	memcpy((unsigned char *)V_BIOS, scratch, length);
-	free(scratch);
-    }
-
-    restoreMem(pciP);
-    return length;
-}
-
-CARD32
-findPci(CARD16 slotBX)
-{
-    CARD32 slot = slotBX << 8;
-
-    if (slot == (CurrentPci->Slot.l & ~PCI_EN))
-	return (CurrentPci->Slot.l | PCI_EN);
-    else {
-#if !SHOW_ALL_DEV
-	PciBusPtr pBus = CurrentPci->pBus;
-	while (pBus) {
-	  /*      fprintf(stderr,"slot: 0x%x  bridge: 0x%x\n",slot, pBus->Slot.l); */
-	    if (slot == (pBus->Slot.l & ~PCI_EN))
-		return pBus->Slot.l | PCI_EN;
-	    pBus = pBus->next;
-	}
-#else
-	PciStructPtr pPci = PciStruct;
-	while (pPci) {
-	  /*fprintf(stderr,"slot: 0x%x  bridge: 0x%x\n",slot, pPci->Slot.l); */
-	    if (slot == (pPci->Slot.l & ~PCI_EN))
-		return pPci->Slot.l | PCI_EN;
-	    pPci = pPci->next;
-	}
-#endif
-    }
-    return 0;
-}
-
-CARD16
-pciSlotBX(PciStructPtr pPci)
-{
-    return (CARD16)((pPci->Slot.l >> 8) & 0xFFFF);
-}
-
-PciStructPtr
-findPciDevice(CARD16 vendorID, CARD16 deviceID, char n)
-{
-    PciStructPtr pPci = CurrentPci;
-    n++;
-
-    while (pPci)  {
-	if ((pPci->VendorID == vendorID) && (pPci->DeviceID == deviceID)) {
-	if (!(--n)) break;
-	}
-    pPci = pPci->next;
-    }
-    return pPci;
-}
-
-PciStructPtr
-findPciClass(CARD8 intf, CARD8 subClass, CARD16 class, char n)
-{
-    PciStructPtr pPci = CurrentPci;
-    n++;
-
-    while (pPci)  {
-	if ((pPci->Interface == intf) && (pPci->SubClass == subClass)
-	 && (pPci->BaseClass == class)) {
-	if (!(--n)) break;
-	}
-    pPci = pPci->next;
-    }
-    return pPci;
-}
-
-static void
-readConfigSpaceCfg1(CARD32 bus, CARD32 dev, CARD32 func, CARD32 *reg)
-{
-    CARD32   config_cmd = PCI_EN | (bus<<16) |
-      (dev<<11) | (func<<8);
-    int i;
-
-    for (i = 0; i<64;i+=4) {
-#ifdef __alpha__
-	reg[i] = axpPciCfgRead(config_cmd | i);
-#else
-	outl(PCI_MODE1_ADDRESS_REG, config_cmd | i);
-	reg[i] = inl(PCI_MODE1_DATA_REG);
-#endif
-
-#ifdef V86BIOS_DEBUG
-	P_printf("0x%lx\n",reg[i]);
-#endif
-    }
-}
-
-static int
-checkSlotCfg1(CARD32 bus, CARD32 dev, CARD32 func)
-{
-    CARD32    config_cmd = PCI_EN | (bus<<16) |
-      (dev<<11) | (func<<8);
-    CARD32 reg;
-#ifdef __alpha__
-	reg = axpPciCfgRead(config_cmd);
-#else
-	outl(PCI_MODE1_ADDRESS_REG, config_cmd);
-	reg = inl(PCI_MODE1_DATA_REG);
-#endif
-    if (reg != 0xFFFFFFFF)
-	return 1;
-    else
-	return 0;
-}
-
-static int
-checkSlotCfg2(CARD32 bus, int dev)
-{
-    CARD32 val;
-
-    outb(PCI_MODE2_ENABLE_REG, 0xF1);
-    outb(PCI_MODE2_FORWARD_REG, bus);
-    val = inl(dev << 8);
-    outb(PCI_MODE2_FORWARD_REG, 0x00);
-    outb(PCI_MODE2_ENABLE_REG, 0x00);
-    if (val == 0xFFFFFFFF)
-	return 0;
-    if (val == 0xF0F0F0F0)
-	return 0;
-    return 1;
-}
-
-static void
-readConfigSpaceCfg2(CARD32 bus, int dev, CARD32 *reg)
-{
-    int i;
-
-    outb(PCI_MODE2_ENABLE_REG, 0xF1);
-    outb(PCI_MODE2_FORWARD_REG, bus);
-    for (i = 0; i<64;i+=4) {
-	reg[i] = inl((dev << 8) + i);
-#ifdef V86BIOS_DEBUG
-	P_printf("0x%lx\n",reg[i]);
-#endif
-    }
-    outb(PCI_MODE2_ENABLE_REG, 0x00);
-}
-
-static CARD8
-interpretConfigSpace(CARD32 *reg, int busidx, CARD8 dev, CARD8 func)
-{
-    CARD32 config_cmd;
-    CARD16 vendor, device;
-    CARD8 baseclass, subclass;
-    CARD8 primary, secondary;
-    CARD8 header, interface;
-    int i;
-
-    config_cmd = PCI_EN | busidx<<16 |
-	(dev<<11) | (func<<8);
-
-    for (i = 0x10; i < 0x28; i+=4) {
-	if (IS_MEM32(reg[i]))
-	    if ((reg[i] & 0xFFFFFFF0) < pciMinMemReg)
-		pciMinMemReg = (reg[i] & 0xFFFFFFF0);
-#ifdef __alpha__
-	if (IS_MEM64(reg[i])) {
-		unsigned long addr = reg[i] |
-	      (unsigned long)(reg[i+4]) << 32;
-	    if ((addr & ~0xfL) < pciMinMemReg)
-		pciMinMemReg = (addr & ~0xfL);
-	    i+=4;
-	}
-#endif
-    }
-    vendor = reg[0] & 0xFFFF;
-    device = reg[0] >> 16;
-    P_printf("bus: %i card: %i func %i reg0: 0x%x ", busidx,dev,func,reg[0]);
-    baseclass = reg[8] >> 24;
-    subclass = (reg[8] >> 16) & 0xFF;
-    interface = (reg[8] >> 8) & 0xFF;
-
-    header = (reg[0x0c] >> 16) & 0xff;
-    P_printf("bc 0x%x, sub 0x%x, if 0x%x, hdr 0x%x\n",
-	     baseclass,subclass,interface,header);
-    if (BRIDGE_CLASS(baseclass)) {
-	if (BRIDGE_PCI_CLASS(subclass)) {
-	    PciBusPtr pbp = malloc(sizeof(PciBusRec));
-	    P_printf("Pci-Pci Bridge found; ");
-	    primary = reg[0x18] & 0xFF;
-	    secondary = (reg[0x18] >> 8) & 0xFF;
-	    P_printf("primary: 0x%x secondary: 0x%x\n",
-		     primary,secondary);
-	    pbp->bctl = reg[0x3c];
-	    pbp->primary = primary;
-	    pbp->secondary = secondary;
-	    pbp->Slot.l = config_cmd;
-	    pbp->next = PciBuses;
-	    PciBuses = pbp;
-	    numbus++;
-	} else if (BRIDGE_HOST_CLASS(subclass)
-		   && (hostbridges++ > 1)) {
-	    numbus++;
-	}
-    } else if (VIDEO_CLASS(baseclass,subclass)) {
-	PciStructPtr pcp = malloc(sizeof(PciStructRec));
-	P_printf("Display adapter found\n");
-	pcp->RomBase = reg[0x30];
-	pcp->cmd_st = reg[4];
-	pcp->active = (reg[4] & 0x03) == 3 ? 1 : 0;
-	pcp->VendorID = vendor;
-	pcp->DeviceID = device;
-	pcp->Interface = interface;
-	pcp->BaseClass = baseclass;
-	pcp->SubClass = subclass;
-	pcp->Slot.l = config_cmd;
-	pcp->bus = busidx;
-	pcp->dev = dev;
-	pcp->func = func;
-	pcp->next = PciStruct;
-	PciStruct = pcp;
-    }
-    if ((func == 0)
-	&& ((header & PCI_MULTIFUNC_DEV) == 0))
-	func = 8;
-    else
-	func++;
-    return func;
-}
-
-static CARD32 remapMEM_val;
-static int remapMEM_num;
-
-static int /* map it on some other video device */
-remapMem(PciStructPtr pciP, int num, CARD32 size)
-{
-    PciStructPtr pciPtr = PciStruct;
-    int i;
-    CARD32 org;
-    CARD32 val;
-    CARD32 size_n;
-
-    org = PciRead32(num + 0x10,pciP->Slot.l);
-
-    while (pciPtr) {
-	for (i = 0; i < 20; i=i+4) {
-
-	    val = PciRead32(i + 0x10,pciPtr->Slot.l);
-	    /* don't map it on itself */
-	    if ((org & 0xfffffff0) == (val & 0xfffffff0))
-		continue;
-	    if (val && !(val & 1))
-		PciWrite32(i + 0x10,0xffffffff,pciPtr->Slot.l);
-	    else
-		continue;
-	    size_n = PciRead32(i + 0x10,pciPtr->Slot.l);
-	    PciWrite32(i + 0x10,val,pciPtr->Slot.l);
-	    size_n = ~(CARD32)(size_n  & 0xfffffff0) + 1;
-
-	    if (size_n >= size) {
-		PciWrite32(num + 0x10,val,pciP->Slot.l);
-		return 1;
-	    }
-	}
-	pciPtr = pciPtr->next;
-    }
-    /* last resort: try to go below lowest PCI mem address */
-    val = ((pciMinMemReg & ~(CARD32)(size - 1)) - size);
-    if (val > 0x7fffffff) {
-	PciWrite32(num + 0x10,val, pciP->Slot.l);
-	return 1;
-    }
-
-    return 0;
-}
-
-static void
-restoreMem(PciStructPtr pciP)
-{
-    if (remapMEM_val == 0) return;
-    PciWrite32(remapMEM_num + 0x10,remapMEM_val,pciP->Slot.l);
-    return;
-}
-
-static CARD32
-findBIOSMap(PciStructPtr pciP, CARD32 *biosSize)
-{
-    PciStructPtr pciPtr = PciStruct;
-    int i;
-    CARD32 val;
-    CARD32 size;
-
-    PciWrite32(0x30,0xffffffff,pciP->Slot.l);
-    *biosSize = PciRead32(0x30,pciP->Slot.l);
-    P_printf("bios size: 0x%x\n",*biosSize);
-    PciWrite32(0x30,pciP->RomBase,pciP->Slot.l);
-    *biosSize = ~(*biosSize & 0xFFFFFF00) + 1;
-    P_printf("bios size masked: 0x%x\n",*biosSize);
-    if (*biosSize > (1024 * 1024 * 16)) {
-      *biosSize = 1024 * 1024 * 16;
-      P_printf("fixing broken BIOS size: 0x%x\n",*biosSize);
-    }
-    while (pciPtr) {
-	if (pciPtr->bus != pciP->bus) {
-	    pciPtr = pciPtr->next;
-	    continue;
-	}
-	for (i = 0; i < 20; i=i+4) {
-
-	    val = PciRead32(i + 0x10,pciPtr->Slot.l);
-	    if (!(val & 1))
-
-	    PciWrite32(i + 0x10,0xffffffff,pciPtr->Slot.l);
-	    else
-		continue;
-	    size = PciRead32(i + 0x10,pciPtr->Slot.l);
-	    PciWrite32(i + 0x10,val,pciPtr->Slot.l);
-	    size = ~(CARD32)(size & 0xFFFFFFF0) + 1;
-#ifdef V86_BIOS_DEBUG
-	    P_printf("size: 0x%x\n",size);
-#endif
-	    if (size >= *biosSize) {
-		if (pciP == pciPtr) { /* if same device remap ram*/
-		    if (!(remapMem(pciP,i,size)))
-			continue;
-		    remapMEM_val = val;
-		    remapMEM_num = i;
-		} else {
-		    remapMEM_val = 0;
-		}
-		return val & 0xFFFFFF00;
-	    }
-	}
-	pciPtr = pciPtr->next;
-    }
-    remapMEM_val = 0;
-    /* very last resort */
-    if (pciP->bus == 0 && (pciMinMemReg > *biosSize))
-      return (pciMinMemReg - size) & ~(size - 1);
-
-    return 0;
-}
-
-int
-cfg1out(CARD16 addr, CARD32 val)
-{
-  if (addr == 0xCF8) {
-    PciCfg1Addr = val;
-    return 1;
-  } else if (addr == 0xCFC) {
-    writePci(PciCfg1Addr, val);
-    return 1;
-  }
-  return 0;
-}
-
-int
-cfg1in(CARD16 addr, CARD32 *val)
-{
-  if (addr == 0xCF8) {
-    *val = PciCfg1Addr;
-    return 1;
-  } else if (addr == 0xCFC) {
-    *val = readPci(PciCfg1Addr);
-    return 1;
-  }
-  return 0;
-}
-
-void
-list_pci(void)
-{
-    PciStructPtr pci = PciList;
-
-    while (pci) {
-    printf("[0x%x:0x%x:0x%x] vendor: 0x%4.4x dev: 0x%4.4x class: 0x%4.4x"
-	   " subclass: 0x%4.4x\n",pci->bus,pci->dev,pci->func,
-	   pci->VendorID,pci->DeviceID,pci->BaseClass,pci->SubClass);
-    pci = pci->next;
-    }
-}
-
-PciStructPtr
-findPciByIDs(int bus, int dev, int func)
-{
-  PciStructPtr pciP = PciList;
-
-  while (pciP) {
-    if (pciP->bus == bus && pciP->dev == dev && pciP->func == func)
-      return pciP;
-    pciP = pciP->next;
-  }
-  return NULL;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/pci.h b/board/MAI/bios_emulator/scitech/src/v86bios/pci.h
deleted file mode 100644
index 58ad52202e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/pci.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "v86bios.h"
-
-#ifndef V86_PCI_H
-#define V86_PCI_H
-
-typedef union {
-    struct {
-	unsigned int    zero:2;
-	unsigned int    reg:6;
-	unsigned int    func:3;
-	unsigned int    dev:5;
-	unsigned int    bus:8;
-	unsigned int    reserved:7;
-	unsigned int    enable:1;
-    } pci;
-    CARD32 l;
-} PciSlot;
-
-typedef struct pciBusRec {
-    CARD8 primary;
-    CARD8 secondary;
-    CARD32 bctl;
-    PciSlot Slot;
-    struct pciBusRec *next;
-    struct pciBusRec *pBus;
-} PciBusRec, *PciBusPtr;
-
-typedef struct pciStructRec {
-    CARD16 VendorID;
-    CARD16 DeviceID;
-    CARD8 Interface;
-    CARD8 BaseClass;
-    CARD8 SubClass;
-    CARD32 RomBase;
-    CARD32 bus;
-    CARD8 dev;
-    CARD8 func;
-    CARD32 cmd_st;
-    int active;
-    PciSlot Slot;
-    struct pciStructRec *next;
-    PciBusPtr pBus;
-} PciStructRec , *PciStructPtr;
-
-
-extern PciStructPtr CurrentPci;
-extern PciStructPtr PciList;
-extern PciStructPtr BootBios;
-extern int pciMaxBus;
-
-extern CARD32 findPci(CARD16 slotBX);
-extern CARD16 pciSlotBX(PciStructPtr);
-PciStructPtr findPciDevice(CARD16 vendorID, CARD16 deviceID, char n);
-PciStructPtr findPciClass(CARD8 intf, CARD8 subClass, CARD16 class, char n);
-
-extern CARD8 PciRead8(int offset, CARD32 slot);
-extern CARD16 PciRead16(int offset, CARD32 slot);
-extern CARD32 PciRead32(int offset, CARD32 slot);
-
-extern void PciWrite8(int offset,CARD8 byte, CARD32 slot);
-extern void PciWrite16(int offset,CARD16 word, CARD32 slot);
-extern void PciWrite32(int offset,CARD32 lg, CARD32 slot);
-
-extern void scan_pci(void);
-extern void pciVideoDisable(void);
-extern void pciVideoRestore(void);
-extern void EnableCurrent(void);
-extern int mapPciRom(PciStructPtr pciP);
-extern int cfg1out(CARD16 addr, CARD32 val);
-extern int cfg1in(CARD16 addr, CARD32 *val);
-extern void list_pci(void);
-extern PciStructPtr findPciByIDs(int bus, int dev, int func);
-
-#define PCI_MODE2_ENABLE_REG  0xCF8
-#define PCI_MODE2_FORWARD_REG  0xCFA
-#define PCI_MODE1_ADDRESS_REG  0xCF8
-#define PCI_MODE1_DATA_REG  0xCFC
-#if defined(__alpha__) || defined(__sparc__)
-#define PCI_EN 0x00000000
-#else
-#define PCI_EN 0x80000000
-#endif
-#define MAX_DEV_PER_VENDOR_CFG1  32
-#define BRIDGE_CLASS(x) (x == 0x06)
-#define BRIDGE_PCI_CLASS(x) (x == 0x04)
-#define BRIDGE_HOST_CLASS(x) (x == 0x00)
-#define PCI_CLASS_PREHISTORIC 0x00
-#define PCI_SUBCLASS_PREHISTORIC_VGA 0x01
-#define PCI_CLASS_DISPLAY 0x03
-#define PCI_SUBCLASS_DISPLAY_VGA 0x00
-#define PCI_SUBCLASS_DISPLAY_XGA 0x01
-#define PCI_SUBCLASS_DISPLAY_MISC 0x80
-#define VIDEO_CLASS(b,s) \
-    (((b) == PCI_CLASS_PREHISTORIC && (s) == PCI_SUBCLASS_PREHISTORIC_VGA) || \
-     ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_VGA) ||\
-     ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_XGA) ||\
-     ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_MISC))
-#define PCI_MULTIFUNC_DEV  0x80
-#define MAX_PCI_DEVICES   64
-#define PCI_MAXBUS 16
-#define PCI_IS_MEM 0x00000001
-#define MAX_PCI_ROM_SIZE (1024 * 1024 * 16)
-
-#define IS_MEM32(x) ((x & 0x7) == 0 && x != 0)
-#define IS_MEM64(x) ((x & 0x7) == 0x4)
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86.c b/board/MAI/bios_emulator/scitech/src/v86bios/v86.c
deleted file mode 100644
index 4deed044cb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86.c
+++ /dev/null
@@ -1,562 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "debug.h"
-#include <sys/vm86.h>
-#include <unistd.h>
-#include <errno.h>
-#include <asm/unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
-#include <setjmp.h>
-#include "v86bios.h"
-#include "AsmMacros.h"
-
-struct vm86_struct vm86s;
-
-static int vm86_GP_fault(void);
-static int vm86_do_int(int num);
-static void dump_code(void);
-static void dump_registers(void);
-static void stack_trace(void);
-static int vm86_rep(struct vm86_struct *ptr);
-
-#define CPU_REG(x) (vm86s.regs.##x)
-#define CPU_REG_LW(reg)      (*((CARD16 *)&CPU_REG(reg)))
-#define CPU_REG_HW(reg)      (*((CARD16 *)&CPU_REG(reg) + 1))
-#define CPU_REG_LB(reg)      (*(CARD8 *)&CPU_REG(e##reg))
-#define SEG_ADR(type, seg, reg)  type((CPU_REG_LW(seg) << 4) \
-				      + CPU_REG_LW(e##reg))
-#define DF (1 << 10)
-
-struct pio P;
-
-
-void
-setup_io(void)
-{
-    if (!Config.PrintPort && !Config.IoStatistics) {
-    P.inb = (CARD8(*)(CARD16))inb;
-    P.inw = (CARD16(*)(CARD16))inw;
-    P.inl = (CARD32(*)(CARD16))inl;
-    P.outb = (void(*)(CARD16,CARD8))outb;
-    P.outw = (void(*)(CARD16,CARD16))outw;
-    P.outl = (void(*)(CARD16,CARD32))outl;
-    } else {
-    P.inb = p_inb;
-    P.inw = p_inw;
-    P.inl = p_inl;
-    P.outb = p_outb;
-    P.outw = p_outw;
-    P.outl = p_outl;
-    }
-}
-
-
-static void
-setup_vm86(unsigned long bios_start, i86biosRegsPtr regs)
-{
-    CARD32 eip;
-    CARD16 cs;
-
-    vm86s.flags = VM86_SCREEN_BITMAP;
-    vm86s.flags = 0;
-    vm86s.screen_bitmap = 0;
-    vm86s.cpu_type = CPU_586;
-    memset(&vm86s.int_revectored, 0xff,sizeof(vm86s.int_revectored)) ;
-    memset(&vm86s.int21_revectored, 0xff,sizeof(vm86s.int21_revectored)) ;
-
-    eip = bios_start & 0xFFFF;
-    cs = (bios_start & 0xFF0000) >> 4;
-
-    CPU_REG(eax) = regs->ax;
-    CPU_REG(ebx) = regs->bx;
-    CPU_REG(ecx) = regs->cx;
-    CPU_REG(edx) = regs->dx;
-    CPU_REG(esi) = 0;
-    CPU_REG(edi) = regs->di;
-    CPU_REG(ebp) = 0;
-    CPU_REG(eip) = eip;
-    CPU_REG(cs) = cs;
-    CPU_REG(esp) = 0x100;
-    CPU_REG(ss) = 0x30;               /* This is the standard pc bios stack */
-    CPU_REG(es) = regs->es;
-    CPU_REG(ds) = 0x40;               /* standard pc ds */
-    CPU_REG(fs) = 0;
-    CPU_REG(gs) = 0;
-    CPU_REG(eflags) |= (VIF_MASK | VIP_MASK);
-}
-
-void
-collect_bios_regs(i86biosRegsPtr regs)
-{
-    regs->ax = CPU_REG(eax);
-    regs->bx = CPU_REG(ebx);
-    regs->cx = CPU_REG(ecx);
-    regs->dx = CPU_REG(edx);
-    regs->es = CPU_REG(es);
-    regs->ds = CPU_REG(ds);
-    regs->di = CPU_REG(edi);
-    regs->si = CPU_REG(esi);
-}
-
-static int
-do_vm86(void)
-{
-    int retval;
-
-#ifdef V86BIOS_DEBUG
-    dump_registers();
-#endif
-/*    retval = SYS_vm86old(&vm86s); */
-/*    retval = syscall(SYS_vm86old,&vm86s); */
-
-    retval = vm86_rep(&vm86s);
-
-    switch (VM86_TYPE(retval)) {
-    case VM86_UNKNOWN:
-	if (!vm86_GP_fault()) return 0;
-	break;
-    case VM86_STI:
-	fprintf(stderr,"vm86_sti :-((\n");
-	stack_trace();
-	dump_code();
-	return 0;
-    case VM86_INTx:
-	if (!vm86_do_int(VM86_ARG(retval))) {
-	    fprintf(stderr,"\nUnknown vm86_int: %X\n\n",VM86_ARG(retval));
-	    dump_registers();
-	    return 0;
-	}
-	/* I'm not sure yet what to do if we can handle ints */
-	break;
-    case VM86_SIGNAL:
-	fprintf(stderr,"received signal\n");
-	return 0;
-    default:
-	fprintf(stderr,"unknown type(0x%x)=0x%x\n",
-		VM86_ARG(retval),VM86_TYPE(retval));
-	dump_registers();
-	dump_code();
-	stack_trace();
-	return 0;
-    }
-
-    return 1;
-}
-
-static jmp_buf x86_esc;
-static void
-vmexit(int unused)
-{
-    longjmp(x86_esc,1);
-}
-
-void
-do_x86(unsigned long bios_start, i86biosRegsPtr regs)
-{
-    static void (*org_handler)(int);
-
-    setup_vm86(bios_start, regs);
-    if (setjmp(x86_esc) == 0) {
-	org_handler = signal(2,vmexit);
-	while(do_vm86()) {};
-	signal(2,org_handler);
-	collect_bios_regs(regs);
-    } else {
-	signal(2,org_handler);
-	printf("interrupted at 0x%x\n",((CARD16)CPU_REG(cs)) << 4
-	   | (CARD16)CPU_REG(eip));
-    }
-}
-
-/* get the linear address */
-#define LIN_PREF_SI  ((pref_seg << 4) + CPU_REG_LW(esi))
-
-#define LWECX       (prefix66 ^ prefix67 ? CPU_REG(ecx) : CPU_REG_LW(ecx))
-
-static int
-vm86_GP_fault(void)
-{
-    unsigned char *csp, *lina;
-    CARD32 org_eip;
-    int pref_seg;
-    int done,is_rep,prefix66,prefix67;
-
-
-    csp = lina = SEG_ADR((unsigned char *), cs, ip);
-#ifdef V86BIOS_DEBUG
-    printf("exception: \n");
-    dump_code();
-#endif
-
-    is_rep = 0;
-    prefix66 = prefix67 = 0;
-    pref_seg = -1;
-
-    /* eat up prefixes */
-    done = 0;
-    do {
-	switch (*(csp++)) {
-	case 0x66:      /* operand prefix */  prefix66=1; break;
-	case 0x67:      /* address prefix */  prefix67=1; break;
-	case 0x2e:      /* CS */              pref_seg=CPU_REG(cs); break;
-	case 0x3e:      /* DS */              pref_seg=CPU_REG(ds); break;
-	case 0x26:      /* ES */              pref_seg=CPU_REG(es); break;
-	case 0x36:      /* SS */              pref_seg=CPU_REG(ss); break;
-	case 0x65:      /* GS */              pref_seg=CPU_REG(gs); break;
-	case 0x64:      /* FS */              pref_seg=CPU_REG(fs); break;
-	case 0xf2:      /* repnz */
-	case 0xf3:      /* rep */             is_rep=1; break;
-	default: done=1;
-	}
-    } while (!done);
-    csp--;   /* oops one too many */
-    org_eip = CPU_REG(eip);
-    CPU_REG_LW(eip) += (csp - lina);
-
-    switch (*csp) {
-
-    case 0x6c:                    /* insb */
-	/* NOTE: ES can't be overwritten; prefixes 66,67 should use esi,edi,ecx
-	 * but is anyone using extended regs in real mode? */
-	/* WARNING: no test for DI wrapping! */
-	CPU_REG_LW(edi) += port_rep_inb(CPU_REG_LW(edx),
-					SEG_ADR((CARD8 *),es,di),
-					CPU_REG_LW(eflags)&DF,
-					(is_rep? LWECX:1));
-	if (is_rep) LWECX = 0;
-	CPU_REG_LW(eip)++;
-	break;
-
-    case 0x6d:                  /* (rep) insw / insd */
-	/* NOTE: ES can't be overwritten */
-	/* WARNING: no test for _DI wrapping! */
-	if (prefix66) {
-	    CPU_REG_LW(edi) += port_rep_inl(CPU_REG_LW(edx),
-					    SEG_ADR((CARD32 *),es,di),
-					    CPU_REG_LW(eflags)&DF,
-					    (is_rep? LWECX:1));
-	}
-	else {
-	    CPU_REG_LW(edi) += port_rep_inw(CPU_REG_LW(edx),
-					    SEG_ADR((CARD16 *),es,di),
-					    CPU_REG_LW(eflags)&DF,
-					    (is_rep? LWECX:1));
-	}
-	if (is_rep) LWECX = 0;
-	CPU_REG_LW(eip)++;
-	break;
-
-    case 0x6e:                  /* (rep) outsb */
-	if (pref_seg < 0) pref_seg = CPU_REG_LW(ds);
-	/* WARNING: no test for _SI wrapping! */
-	CPU_REG_LW(esi) += port_rep_outb(CPU_REG_LW(edx),(CARD8*)LIN_PREF_SI,
-					 CPU_REG_LW(eflags)&DF,
-					 (is_rep? LWECX:1));
-	if (is_rep) LWECX = 0;
-	CPU_REG_LW(eip)++;
-	break;
-
-    case 0x6f:                  /* (rep) outsw / outsd */
-	if (pref_seg < 0) pref_seg = CPU_REG_LW(ds);
-	/* WARNING: no test for _SI wrapping! */
-	if (prefix66) {
-	    CPU_REG_LW(esi) += port_rep_outl(CPU_REG_LW(edx),
-					     (CARD32 *)LIN_PREF_SI,
-					     CPU_REG_LW(eflags)&DF,
-					     (is_rep? LWECX:1));
-	}
-	else {
-	    CPU_REG_LW(esi) += port_rep_outw(CPU_REG_LW(edx),
-					     (CARD16 *)LIN_PREF_SI,
-					     CPU_REG_LW(eflags)&DF,
-					     (is_rep? LWECX:1));
-	}
-	if (is_rep) LWECX = 0;
-	CPU_REG_LW(eip)++;
-	break;
-
-    case 0xe5:                  /* inw xx, inl xx */
-	if (prefix66) CPU_REG(eax) = P.inl((int) csp[1]);
-	else CPU_REG_LW(eax) = P.inw((int) csp[1]);
-	CPU_REG_LW(eip) += 2;
-	break;
-    case 0xe4:                  /* inb xx */
-	CPU_REG_LW(eax) &= ~(CARD32)0xff;
-	CPU_REG_LB(ax) |= P.inb((int) csp[1]);
-	CPU_REG_LW(eip) += 2;
-	break;
-    case 0xed:                  /* inw dx, inl dx */
-	if (prefix66) CPU_REG(eax) = P.inl(CPU_REG_LW(edx));
-	else CPU_REG_LW(eax) = P.inw(CPU_REG_LW(edx));
-	CPU_REG_LW(eip) += 1;
-	break;
-    case 0xec:                  /* inb dx */
-	CPU_REG_LW(eax) &= ~(CARD32)0xff;
-	CPU_REG_LB(ax) |= P.inb(CPU_REG_LW(edx));
-	CPU_REG_LW(eip) += 1;
-	break;
-
-    case 0xe7:                  /* outw xx */
-	if (prefix66) P.outl((int)csp[1], CPU_REG(eax));
-	else P.outw((int)csp[1], CPU_REG_LW(eax));
-	CPU_REG_LW(eip) += 2;
-	break;
-    case 0xe6:                  /* outb xx */
-	P.outb((int) csp[1], CPU_REG_LB(ax));
-	CPU_REG_LW(eip) += 2;
-	break;
-    case 0xef:                  /* outw dx */
-	if (prefix66) P.outl(CPU_REG_LW(edx), CPU_REG(eax));
-	else P.outw(CPU_REG_LW(edx), CPU_REG_LW(eax));
-	CPU_REG_LW(eip) += 1;
-	break;
-    case 0xee:                  /* outb dx */
-	P.outb(CPU_REG_LW(edx), CPU_REG_LB(ax));
-	CPU_REG_LW(eip) += 1;
-	break;
-
-    case 0xf4:
-#ifdef V86BIOS_DEBUG
-	printf("hlt at %p\n", lina);
-#endif
-	return 0;
-
-    case 0x0f:
-	fprintf(stderr,"CPU 0x0f Trap at eip=0x%lx\n",CPU_REG(eip));
-	goto op0ferr;
-	break;
-
-    case 0xf0:                  /* lock */
-    default:
-	fprintf(stderr,"unknown reason for exception\n");
-	dump_registers();
-	stack_trace();
-    op0ferr:
-	dump_code();
-	fprintf(stderr,"cannot continue\n");
-	return 0;
-    }                           /* end of switch() */
-    return 1;
-}
-
-static int
-vm86_do_int(int num)
-{
-    int val;
-    struct regs86 regs;
-
-    i_printf("int 0x%x received: ax:0x%lx",num,CPU_REG(eax));
-    if (Config.PrintIp)
-	i_printf(" at: 0x%x\n",getIP());
-    else
-	i_printf("\n");
-
-    /* try to run bios interrupt */
-
-    /* if not installed fall back */
-#define COPY(x) regs.##x = CPU_REG(x)
-#define COPY_R(x) CPU_REG(x) = regs.##x
-
-    COPY(eax);
-    COPY(ebx);
-    COPY(ecx);
-    COPY(edx);
-    COPY(esi);
-    COPY(edi);
-    COPY(ebp);
-    COPY(eip);
-    COPY(esp);
-    COPY(cs);
-    COPY(ss);
-    COPY(ds);
-    COPY(es);
-    COPY(fs);
-    COPY(gs);
-    COPY(eflags);
-
-    if (!(val = int_handler(num,&regs)))
-	if (!(val = run_bios_int(num,&regs)))
-	    return val;
-
-    COPY_R(eax);
-    COPY_R(ebx);
-    COPY_R(ecx);
-    COPY_R(edx);
-    COPY_R(esi);
-    COPY_R(edi);
-    COPY_R(ebp);
-    COPY_R(eip);
-    COPY_R(esp);
-    COPY_R(cs);
-    COPY_R(ss);
-    COPY_R(ds);
-    COPY_R(es);
-    COPY_R(fs);
-    COPY_R(gs);
-    COPY_R(eflags);
-
-    return val;
-#undef COPY
-#undef COPY_R
-}
-
-static void
-dump_code(void)
-{
-    int i;
-    unsigned char *lina = SEG_ADR((unsigned char *), cs, ip);
-
-    fprintf(stderr,"code at 0x%8.8x: ",(CARD32)lina);
-    for (i=0; i<0x10; i++)
-	fprintf(stderr,"%2.2x ",*(lina + i));
-    fprintf(stderr,"\n                    ");
-    for (; i<0x20; i++)
-	fprintf(stderr,"%2.2x ",*(lina + i));
-    fprintf(stderr,"\n");
-}
-
-#define PRINT(x) fprintf(stderr,#x":%4.4x ",CPU_REG_LW(x))
-#define PRINT_FLAGS(x) fprintf(stderr,#x":%8.8x ",CPU_REG_LW(x))
-static void
-dump_registers(void)
-{
-    PRINT(eip);
-    PRINT(eax);
-    PRINT(ebx);
-    PRINT(ecx);
-    PRINT(edx);
-    PRINT(esi);
-    PRINT(edi);
-    PRINT(ebp);
-    fprintf(stderr,"\n");
-    PRINT(esp);
-    PRINT(cs);
-    PRINT(ss);
-    PRINT(es);
-    PRINT(ds);
-    PRINT(fs);
-    PRINT(gs);
-    PRINT_FLAGS(eflags);
-    fprintf(stderr,"\n");
-}
-
-static void
-stack_trace(void)
-{
-    int i;
-    unsigned char *stack = SEG_ADR((unsigned char *), ss, sp);
-
-    fprintf(stderr,"stack at 0x%8.8lx:\n",(unsigned long)stack);
-    for (i=0; i < 0x10; i++)
-	fprintf(stderr,"%2.2x ",*(stack + i));
-    fprintf(stderr,"\n");
-
-}
-
-static int
-vm86_rep(struct vm86_struct *ptr)
-{
-
-    int __res;
-
-    __asm__ __volatile__("int $0x80\n"
-			 :"=a" (__res):"a" ((int)113),
-			 "b" ((struct vm86_struct *)ptr));
-
-	    if ((__res) < 0) {
-		errno = -__res;
-		__res=-1;
-	    }
-	    else errno = 0;
-	    return __res;
-}
-
-#define pushw(base, ptr, val) \
-__asm__ __volatile__( \
-	"decw %w0\n\t" \
-	"movb %h2,(%1,%0)\n\t" \
-	"decw %w0\n\t" \
-	"movb %b2,(%1,%0)" \
-	: "=r" (ptr) \
-	: "r" (base), "q" (val), "0" (ptr))
-
-int
-run_bios_int(int num, struct regs86 *regs)
-{
-    CARD16 *ssp;
-    CARD32 sp;
-    CARD32 eflags;
-
-#ifdef V86BIOS_DEBUG
-    static int firsttime = 1;
-#endif
-    /* check if bios vector is initialized */
-    if (((CARD16*)0)[(num<<1)+1] == 0x0000) { /* SYS_BIOS_SEG ?*/
-#ifdef V86BIOS_DEBUG
-	i_printf("card BIOS not loaded\n");
-#endif
-	return 0;
-    }
-
-#ifdef V86BIOS_DEBUG
-    if (firsttime) {
-	dprint(0,0x3D0);
-	firsttime = 0;
-    }
-#endif
-
-    i_printf("calling card BIOS at: ");
-    ssp = (CARD16*)(CPU_REG(ss)<<4);
-    sp = (CARD32) CPU_REG_LW(esp);
-
-    eflags = regs->eflags;
-    eflags = ((eflags & VIF_MASK) != 0)
-	? (eflags | IF_MASK) : (eflags & ~(CARD32) IF_MASK);
-    pushw(ssp, sp, eflags);
-    pushw(ssp, sp, regs->cs);
-    pushw(ssp, sp, (CARD16)regs->eip);
-    regs->esp -= 6;
-    regs->cs = ((CARD16 *) 0)[(num << 1) + 1];
-    regs->eip = (regs->eip & 0xFFFF0000) | ((CARD16 *) 0)[num << 1];
-    i_printf("0x%x:%lx\n",regs->cs,regs->eip);
-#ifdef V86BIOS_DEBUG
-    dump_code();
-#endif
-    regs->eflags = regs->eflags
-		       & ~(VIF_MASK | TF_MASK | IF_MASK | NT_MASK);
-    return 1;
-}
-
-CARD32
-getIntVect(int num)
-{
-    return ((CARD32*)0)[num];
-}
-
-CARD32
-getIP(void)
-{
-    return (CPU_REG(cs) << 4) + CPU_REG(eip);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c b/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c
deleted file mode 100644
index 101c1f26e6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#define DELETE
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <readline/readline.h>
-#include <readline/history.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00            /* default BIOS entry */
-#define BIOS_MEM 0x600
-
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0, 0xf4 }; */
-#define VB_X(x) (V_BIOS >> x) & 0xFF
-CARD8 code[] = { 6, 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xf4 };
-/*CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xb8, 0x03, 0x00, */
-/*0xcd, 0x10, 0xf4 }; */
-/*CARD8 code[] = {  0xb8 , 0xf0 , 0xf0 ,0xf4 }; */
-
-int ioperm_list[IOPERM_BITS] = {0,};
-
-static void sig_handler(int);
-static int map(void);
-static void unmap(void);
-static void bootBIOS(CARD16 ax);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(memType v_base);
-static int copy_sys_bios(void);
-static void save_bios_to_file(void);
-static int setup_system_bios(void);
-static CARD32 setup_int_vect(void);
-#ifdef __ia32__
-static CARD32 setup_primary_int_vect(void);
-#endif
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax);
-static void print_regs(i86biosRegsPtr regs);
-static void print_usage(void);
-static void set_hlt(Bool set);
-static void set_ioperm(void);
-
-extern void yyparse();
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-void dprint(unsigned long start, unsigned long size);
-
-static int vram_mapped = 0;
-static char* bios_var = NULL;
-static CARD8 save_msr;
-static CARD8 save_pos102;
-static CARD8 save_vse;
-static CARD8 save_46e8;
-static haltpoints hltp[20] = { {0, 0}, };
-
-console Console = {-1,-1};
-struct config Config;
-
-int main(int argc,char **argv)
-{
-    int c;
-
-    Config.PrintPort = PRINT_PORT;
-    Config.IoStatistics = IO_STATISTICS;
-    Config.PrintIrq = PRINT_IRQ;
-    Config.PrintPci = PRINT_PCI;
-    Config.ShowAllDev = SHOW_ALL_DEV;
-    Config.PrintIp = PRINT_IP;
-    Config.SaveBios = SAVE_BIOS;
-    Config.Trace = TRACE;
-    Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY;  /* boot */
-    Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE; /* boot */
-    Config.MapSysBios = MAP_SYS_BIOS;
-    Config.Resort = RESORT;  /* boot */
-    Config.FixRom = FIX_ROM;
-    Config.NoConsole = NO_CONSOLE;
-    Config.BootOnly = FALSE;
-    Config.Verbose = VERBOSE;
-
-    opterr = 0;
-    while ((c = getopt(argc,argv,"psicaPStAdbrfnv:?")) != EOF) {
-    switch(c) {
-    case 'p':
-	Config.PrintPort = TRUE;
-	break;
-    case 's':
-	Config.IoStatistics = TRUE;
-	break;
-    case 'i':
-	Config.PrintIrq = TRUE;
-	break;
-    case 'c':
-	Config.PrintPci = TRUE;
-	break;
-    case 'a':
-	Config.ShowAllDev = TRUE;
-	break;
-    case 'P':
-	Config.PrintIp = TRUE;
-	break;
-    case 'S':
-	Config.SaveBios = TRUE;
-	break;
-    case 't':
-	Config.Trace = TRUE;
-	break;
-    case 'A':
-	Config.ConfigActiveOnly = TRUE;
-	break;
-    case 'd':
-	Config.ConfigActiveDevice = TRUE;
-	break;
-    case 'b':
-	Config.MapSysBios = TRUE;
-	break;
-    case 'r':
-	Config.Resort = TRUE;
-	break;
-    case 'f':
-	Config.FixRom = TRUE;
-	break;
-    case 'n':
-	Config.NoConsole = TRUE;
-	break;
-    case 'v':
-	Config.Verbose = strtol(optarg,NULL,0);
-	break;
-    case '?':
-	print_usage();
-	break;
-    default:
-	break;
-    }
-    }
-
-
-    if (!map())
-    exit(1);
-
-    if (!setup_system_bios())
-    exit(1);
-
-    iopl(3);
-
-    scan_pci();
-
-    save_msr = inb(0x3CC);
-    save_vse = inb(0x3C3);
-    save_46e8 = inb(0x46e8);
-    save_pos102 = inb(0x102);
-
-    if (Config.BootOnly) {
-
-    if (!CurrentPci && !Config.ConfigActiveDevice
-	&& !Config.ConfigActiveOnly) {
-	iopl(0);
-	unmap();
-	exit (1);
-    }
-    call_boot(NULL);
-    } else {
-    using_history();
-    yyparse();
-    }
-
-    unmap();
-
-    pciVideoRestore();
-
-    outb(0x102, save_pos102);
-    outb(0x46e8, save_46e8);
-    outb(0x3C3, save_vse);
-    outb(0x3C2, save_msr);
-
-    iopl(0);
-
-    close_console(Console);
-
-    exit(0);
-}
-
-
-void
-call_boot(struct device *dev)
-{
-    int Active_is_Pci = 0;
-    CARD32 vbios_base;
-
-    CurrentPci = PciList;
-    Console = open_console();
-
-    set_ioperm();
-
-
-    signal(2,sig_handler);
-    signal(11,sig_handler);
-
-    /* disable primary card */
-    pciVideoRestore(); /* reset PCI state to see primary card */
-    outb(0x3C2,~(CARD8)0x03 & save_msr);
-    outb(0x3C3,~(CARD8)0x01 & save_vse);
-    outb(0x46e8, ~(CARD8)0x08 & save_46e8);
-    outb(0x102, ~(CARD8)0x01 & save_pos102);
-
-    pciVideoDisable();
-
-    while (CurrentPci) {
-    CARD16 ax;
-
-    if (CurrentPci->active) {
-	Active_is_Pci = 1;
-	if (!Config.ConfigActiveDevice && !dev) {
-	CurrentPci = CurrentPci->next;
-	continue;
-	}
-    } else if (Config.ConfigActiveOnly && !dev) {
-	CurrentPci = CurrentPci->next;
-	continue;
-    }
-    if (dev && ((dev->type != PCI)
-	    || (dev->type == PCI
-	    && (dev->loc.pci.dev != CurrentPci->dev
-		|| dev->loc.pci.bus != CurrentPci->bus
-		|| dev->loc.pci.func != CurrentPci->func)))) {
-	CurrentPci = CurrentPci->next;
-	continue;
-    }
-
-    EnableCurrent();
-
-    if (CurrentPci->active) {
-	outb(0x102, save_pos102);
-	outb(0x46e8, save_46e8);
-	outb(0x3C3, save_vse);
-	outb(0x3C2, save_msr);
-    }
-
-    /* clear interrupt vectors */
-#ifdef __ia32__
-    vbios_base = CurrentPci->active ? setup_primary_int_vect()
-	: setup_int_vect();
-#else
-    vbios_base = setup_int_vect();
-#endif
-    ax = ((CARD16)(CurrentPci->bus) << 8)
-	| (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
-    if (Config.Verbose > 1) P_printf("ax: 0x%x\n",ax);
-
-    BootBios = findPciByIDs(CurrentPci->bus,CurrentPci->dev,
-		   CurrentPci->func);
-    if (!((mapPciRom(BootBios) && chksum((CARD8*)V_BIOS))
-	  || (CurrentPci->active && copy_vbios(vbios_base)))) {
-	CurrentPci = CurrentPci->next;
-	continue;
-    }
-    if (!map_vram()) {
-	CurrentPci = CurrentPci->next;
-	continue;
-    }
-    if (Config.SaveBios) save_bios_to_file();
-    printf("initializing PCI bus: %i dev: %i func: %i\n",CurrentPci->bus,
-	   CurrentPci->dev,CurrentPci->func);
-    bootBIOS(ax);
-    unmap_vram();
-
-    if (CurrentPci->active)
-	close_console(Console);
-
-    if (dev) return;
-
-    CurrentPci = CurrentPci->next;
-    }
-
-    /* We have an ISA device - configure if requested */
-    if (!Active_is_Pci /* no isa card in system! */
-    && ((!dev && (Config.ConfigActiveDevice || Config.ConfigActiveOnly))
-	|| (dev && dev->type == ISA))) {
-
-    pciVideoDisable();
-
-    if (!dev || dev->type == ISA) {
-	outb(0x102, save_pos102);
-	outb(0x46e8, save_46e8);
-	outb(0x3C3, save_vse);
-	outb(0x3C2, save_msr);
-
-#ifdef __ia32__
-	vbios_base = setup_primary_int_vect();
-#else
-	vbios_base = setup_int_vect();
-#endif
-	if (copy_vbios(vbios_base)) {
-
-	if (Config.SaveBios) save_bios_to_file();
-	if  (map_vram()) {
-	    printf("initializing ISA bus\n");
-	    bootBIOS(0);
-	}
-	}
-
-	unmap_vram();
-	sleep(1);
-	close_console(Console);
-    }
-    }
-
-
-}
-
-int
-map(void)
-{
-    void* mem;
-    mem = mmap(0, (size_t)SIZE,
-	       PROT_EXEC | PROT_READ | PROT_WRITE,
-	       MAP_FIXED | MAP_PRIVATE | MAP_ANON,
-	       -1, 0 );
-    if (mem != 0) {
-	perror("anonymous map");
-	return (0);
-    }
-    memset(mem,0,SIZE);
-
-    return (1);
-}
-
-static void
-unmap(void)
-{
-    munmap(0,SIZE);
-}
-
-static void
-bootBIOS(CARD16 ax)
-{
-    i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
-    printf("starting BIOS\n");
-#endif
-    setup_io();
-    setup_bios_regs(&bRegs, ax);
-    loadCodeToMem((unsigned char *) BIOS_START, code);
-    do_x86(BIOS_START,&bRegs);
-#ifdef V86BIOS_DEBUG
-    printf("done\n");
-#endif
-}
-
-static int
-map_vram(void)
-{
-    int mem_fd;
-
-#ifdef __ia64__
-    if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
-	{
-	perror("opening memory");
-	return 0;
-    }
-
-#ifdef __alpha__
-       if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
-	 if (!_bus_base_sparse()) sparse_shift = 0;
-	 if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
-						 PROT_READ | PROT_WRITE,
-						 MAP_SHARED,
-						 mem_fd, (VRAM_START << sparse_shift)
-						 | _bus_base_sparse())) == (void *) -1)
-#else
-      if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
-			 PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
-			 mem_fd, VRAM_START) == (void *) -1)
-#endif
-      {
-	perror("mmap error in map_hardware_ram (1)");
-	    close(mem_fd);
-	    return (0);
-	}
-    vram_mapped = 1;
-    close(mem_fd);
-    return (1);
-}
-
-static void
-unmap_vram(void)
-{
-    if (!vram_mapped) return;
-
-    munmap((void*)VRAM_START,VRAM_SIZE);
-    vram_mapped = 0;
-}
-
-static int
-copy_vbios(memType v_base)
-{
-    int mem_fd;
-    unsigned char *tmp;
-    int size;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) v_base, SEEK_SET) != (off_t) v_base) {
-	  fprintf(stderr,"Cannot lseek\n");
-	  goto Error;
-      }
-    tmp = (unsigned char *)malloc(3);
-    if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    if (lseek(mem_fd,(off_t) v_base,SEEK_SET) != (off_t) v_base)
-	goto Error;
-
-    if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
-	fprintf(stderr,"No bios found at: 0x%lx\n",v_base);
-	goto Error;
-    }
-#ifdef DEBUG
-	dprint((unsigned long)tmp,0x100);
-#endif
-    size = *(tmp+2) * 512;
-
-    if (read(mem_fd, (char *)v_base, (size_t) size) != (size_t) size) {
-	    fprintf(stderr,"Cannot read\n");
-	goto Error;
-    }
-    free(tmp);
-    close(mem_fd);
-    if (!chksum((CARD8*)v_base))
-	return (0);
-
-    return (1);
-
-Error:
-    perror("v_bios");
-    close(mem_fd);
-    return (0);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
-    int mem_fd;
-
-    if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
-	perror("opening memory");
-	return (0);
-    }
-
-    if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
-	goto Error;
-    if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
-	goto Error;
-
-    close(mem_fd);
-    return (1);
-
-Error:
-    perror("sys_bios");
-    close(mem_fd);
-    return (0);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
-    int i;
-    CARD8 val;
-    int size = code[0];
-
-    for ( i=1;i<=size;i++) {
-	val = code[i];
-	*ptr++ = val;
-    }
-    return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
-    int i,j;
-    char *c = (char *)start;
-
-    for (j = 0; j < (size >> 4); j++) {
-    char *d = c;
-    printf("\n0x%lx:  ",(unsigned long)c);
-    for (i = 0; i<16; i++)
-	printf("%2.2x ",(unsigned char) (*(c++)));
-    c = d;
-    for (i = 0; i<16; i++) {
-	printf("%c",((((CARD8)(*c)) > 32) && (((CARD8)(*c)) < 128)) ?
-	   (unsigned char) (*(c)): '.');
-	c++;
-    }
-    }
-    printf("\n");
-}
-
-static void
-save_bios_to_file(void)
-{
-    static int num = 0;
-    int size, count;
-    char file_name[256];
-    int fd;
-
-    sprintf(file_name,"bios_%i.fil",num);
-    if ((fd =  open(file_name,O_WRONLY | O_CREAT | O_TRUNC,00644)) == -1)
-	return;
-    size = (*(unsigned char*)(V_BIOS + 2)) * 512;
-#ifdef V86BIOS_DEBUG
-    dprint(V_BIOS,20);
-#endif
-    if ((count = write(fd,(void *)(V_BIOS),size)) != size)
-	fprintf(stderr,"only saved %i of %i bytes\n",size,count);
-    num++;
-}
-
-static void
-sig_handler(int unused)
-{
-    fflush(stdout);
-    fflush(stderr);
-
-    /* put system back in a save state */
-    unmap_vram();
-    pciVideoRestore();
-    outb(0x102, save_pos102);
-    outb(0x46e8, save_46e8);
-    outb(0x3C3, save_vse);
-    outb(0x3C2, save_msr);
-
-    close_console(Console);
-    iopl(0);
-    unmap();
-
-    exit(1);
-}
-
-/*
- * For initialization we just pass ax to the BIOS.
- * PCI BIOSes need this. All other register are set 0.
- */
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax)
-{
-    regs->ax = ax;
-    regs->bx = 0;
-    regs->cx = 0;
-    regs->dx = 0;
-    regs->es = 0;
-    regs->ds = 0x40;               /* standard pc ds */
-    regs->si = 0;
-    regs->di = 0;
-}
-
-/*
- * here we are really paranoid about faking a "real"
- * BIOS. Most of this information was pulled from
- * dosem.
- */
-
-#ifdef __ia32__
-static CARD32
-setup_primary_int_vect(void)
-{
-    int mem_fd;
-    CARD32 vbase;
-    void *map;
-
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-	    {
-    perror("opening memory");
-    return (0);
-    }
-
-    if ((map = mmap((void *) 0, (size_t) 0x2000,
-	 PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
-	 mem_fd, 0)) == (void *)-1)   {
-    perror("mmap error in map_hardware_ram (2)");
-    close(mem_fd);
-    return (0);
-    }
-
-    close(mem_fd);
-    memcpy(0,map,BIOS_MEM);
-    munmap(map,0x2000);
-    /*
-     * create a backup copy of the bios variables to write back the
-     * modified values
-     */
-    if (!bios_var)
-    bios_var = (char *)malloc(BIOS_MEM);
-    memcpy(bios_var,0,BIOS_MEM);
-
-    vbase = (*((CARD16*)(0x10 << 2) + 1)) << 4;
-    if (Config.Verbose > 0) printf("vbase: 0x%x\n",vbase);
-    return vbase;
-}
-#endif
-
-static CARD32
-setup_int_vect(void)
-{
-    const CARD16 cs = 0x0;
-    const CARD16 ip = 0x0;
-    int i;
-
-    /* let the int vects point to the SYS_BIOS seg */
-    for (i=0; i<0x80; i++) {
-	((CARD16*)0)[i<<1] = ip;
-	((CARD16*)0)[(i<<1)+1] = cs;
-    }
-    /* video interrupts default location */
-    ((CARD16*)0)[(0x42<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x42<<1] = 0xf065;
-    ((CARD16*)0)[(0x10<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x10<<1] = 0xf065;
-    /* video param table default location (int 1d) */
-    ((CARD16*)0)[(0x1d<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1d<<1] = 0xf0A4;
-    /* font tables default location (int 1F) */
-    ((CARD16*)0)[(0x1f<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1f<<1] = 0xfa6e;
-
-    /* int 11 default location */
-    ((CARD16*)0)[(0x11<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x11<<1] = 0xf84d;
-    /* int 12 default location */
-    ((CARD16*)0)[(0x12<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x12<<1] = 0xf841;
-    /* int 15 default location */
-    ((CARD16*)0)[(0x15<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x15<<1] = 0xf859;
-    /* int 1A default location */
-    ((CARD16*)0)[(0x1a<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1a<<1] = 0xff6e;
-    /* int 05 default location */
-    ((CARD16*)0)[(0x05<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x05<<1] = 0xff54;
-    /* int 08 default location */
-    ((CARD16*)0)[(0x8<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x8<<1] = 0xfea5;
-    /* int 13 default location (fdd) */
-    ((CARD16*)0)[(0x13<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x13<<1] = 0xec59;
-    /* int 0E default location */
-    ((CARD16*)0)[(0xe<<1)+1] = 0xf000;
-    ((CARD16*)0)[0xe<<1] = 0xef57;
-    /* int 17 default location */
-    ((CARD16*)0)[(0x17<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x17<<1] = 0xefd2;
-    /* fdd table default location (int 1e) */
-    ((CARD16*)0)[(0x1e<<1)+1] = 0xf000;
-    ((CARD16*)0)[0x1e<<1] = 0xefc7;
-    return V_BIOS;
-}
-
-static int
-setup_system_bios(void)
-{
-    char *date = "06/01/99";
-    char *eisa_ident = "PCI/ISA";
-
-    if (Config.MapSysBios) {
-
-	if (!copy_sys_bios()) return 0;
-	return 1;
-
-    } else {
-
-/*    memset((void *)0xF0000,0xf4,0xfff7); */
-
-	/*
-	 * we trap the "industry standard entry points" to the BIOS
-	 * and all other locations by filling them with "hlt"
-	 * TODO: implement hlt-handler for these
-	 */
-	memset((void *)0xF0000,0xf4,0x10000);
-
-	/*
-	 * TODO: we should copy the fdd table (0xfec59-0xfec5b)
-	 * the video parameter table (0xf0ac-0xf0fb)
-	 * and the font tables (0xfa6e-0xfe6d)
-	 * from the original bios here
-	 */
-
-	/* set bios date */
-	strcpy((char *)0xFFFF5,date);
-	/* set up eisa ident string */
-	strcpy((char *)0xFFFD9,eisa_ident);
-	/* write system model id for IBM-AT */
-	((char *)0)[0xFFFFE] = 0xfc;
-
-	return 1;
-    }
-
-}
-
-static void
-update_bios_vars(void)
-{
-    int mem_fd;
-    void *map;
-    memType i;
-
-#ifdef __ia64__
-    if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
-    if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
-	    {
-    perror("opening memory");
-    return;
-    }
-
-    if ((map = mmap((void *) 0, (size_t) 0x2000,
-	 PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
-	 mem_fd, 0)) == (void *)-1)   {
-    perror("mmap error in map_hardware_ram (3)");
-    close(mem_fd);
-    return;
-    }
-
-    for (i = 0; i < BIOS_MEM; i++) {
-    if (bios_var[i] != *(CARD8*)i)
-	*((CARD8*)map + i) = *(CARD8*)i;
-    }
-
-    munmap(map,0x2000);
-    close(mem_fd);
-}
-
-static int
-chksum(CARD8 *start)
-{
-  CARD16 size;
-  CARD8 val = 0;
-  int i;
-
-  size = *(start+2) * 512;
-  for (i = 0; i<size; i++)
-    val += *(start + i);
-
-  if (!val)
-    return 1;
-
-    fprintf(stderr,"BIOS cksum wrong!\n");
-  return 0;
-}
-
-void
-runINT(int num, i86biosRegsPtr Regs)
-{
-    Bool isVideo = FALSE;
-    CARD8 code_int[] = { 3, 0xcd, 0x00, 0xf4 };
-
-    code_int[2] = (CARD8) num;
-
-    if (num == 0x10)
-    isVideo = TRUE;
-
-    if (!setup_system_bios())
-    return;
-
-    if ((isVideo && (!CurrentPci || CurrentPci->active)) || !isVideo) {
-    CARD32 vbios_base;
-
-#ifdef __ia32__
-    if (!(vbios_base = setup_primary_int_vect()))
-#else
-    if (!(vbios_base = setup_int_vect()))
-#endif
-	return;
-    if (!copy_vbios(vbios_base))
-	return;
-    }
-
-    if (!map_vram())
-    return;
-
-#ifdef V86BIOS_DEBUG
-	printf("starting BIOS\n");
-#endif
-    loadCodeToMem((unsigned char *) BIOS_START, code_int);
-    setup_io();
-    print_regs(Regs);
-    set_ioperm();
-    set_hlt(TRUE);
-    do_x86(BIOS_START,Regs);
-    set_hlt(FALSE);
-    print_regs(Regs);
-
-#ifdef V86BIOS_DEBUG
-    printf("done\n");
-#endif
-
-    if ((isVideo && (!CurrentPci || CurrentPci->active)) || !isVideo)
-    update_bios_vars();
-}
-
-static void
-print_regs(i86biosRegsPtr regs)
-{
-    printf("ax=%x bx=%x cx=%x dx=%x ds=%x es=%x di=%x si=%x\n",
-       (CARD16)regs->ax,(CARD16)regs->bx,(CARD16)regs->cx,(CARD16)regs->dx,
-       (CARD16)regs->ds,(CARD16)regs->es,(CARD16)regs->di,
-       (CARD16)regs->si);
-}
-
-static void
-print_usage(void)
-{
-}
-
-void
-add_hlt(unsigned long val)
-{
-    int i;
-
-    if (val < BIOS_MEM || (val > VRAM_START && val < (VRAM_START + VRAM_SIZE))
-    || val >= SIZE) {
-    printf("address out of range\n");
-    return;
-    }
-
-    for (i=0; i<20; i++) {
-    if (hltp[i].address == 0) {
-	hltp[i].address = (void*)val;
-	break;
-    }
-    }
-    if (i == 20) printf("no more hltpoints available\n");
-}
-
-void
-del_hlt(int val)
-{
-    if (val == 21) { /* delete all */
-    int i;
-    printf("clearing all hltpoints\n");
-    for (i=0; i <20; i++)
-	hltp[i].address = NULL;
-    } else if (val >= 0 &&  val <20)
-    hltp[val].address = NULL;
-    else printf("hltpoint %i out of range: valid range 0-19\n",val);
-}
-
-void
-list_hlt()
-{
-    int i;
-    for (i=0; i<20; i++)
-    if (hltp[i].address)
-	printf("hltpoint[%i]: 0x%lx\n",i,(unsigned long)hltp[i].address);
-}
-
-static void
-set_hlt(Bool set)
-{
-    int i;
-    for (i=0; i<20; i++)
-    if (hltp[i].address) {
-	if (set) {
-	hltp[i].orgval = *(CARD8*)hltp[i].address;
-	*(CARD8*)hltp[i].address = 0xf4;
-	} else
-	*(CARD8*)hltp[i].address = hltp[i].orgval;
-    }
-}
-
-static void
-set_ioperm(void)
-{
-    int i, start;
-
-    ioperm(0,IOPERM_BITS,0);
-
-    for (i = 0; i < IOPERM_BITS;i++)
-    if (ioperm_list[i]) {
-	start = i;
-	for (;i < IOPERM_BITS; i++) {
-	if (!ioperm_list[i]) {
-	    ioperm(start,i - start, 1);
-	    break;
-	}
-	}
-    }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h b/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h
deleted file mode 100644
index a8f3f8e649..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef V86_BIOS_H
-#define V86_BIOS_H
-
-#if defined (__i386__) || defined (__i486__) || defined (__i586__) || defined (__i686__) || defined (__k6__)
-# ifndef __ia32__
-#  define __ia32__
-# endif
-#endif
-
-#include <stdio.h>
-
-#define p_printf(f,a...) do {if (Config.PrintPort) lprintf(f,##a);} \
-			 while(0)
-#define i_printf(f,a...) do  {if (Config.PrintIrq) lprintf(f,##a);} \
-			  while(0)
-#define P_printf(f,a...) do {if (Config.PrintPci) lprintf(f,##a);} \
-			  while(0)
-
-typedef unsigned char CARD8;
-typedef unsigned short CARD16;
-typedef unsigned int CARD32;
-#if defined (__alpha__) || defined (__ia64__)
-typedef unsigned long memType;
-#else
-typedef unsigned int memType;
-#endif
-
-typedef int Bool;
-
-#define FALSE 0
-#define TRUE 1
-
-struct config {
-    Bool PrintPort;
-    Bool IoStatistics;
-    Bool PrintIrq;
-    Bool PrintPci;
-    Bool ShowAllDev;
-    Bool PrintIp;
-    Bool SaveBios;
-    Bool Trace;
-    Bool ConfigActiveOnly;
-    Bool ConfigActiveDevice;
-    Bool MapSysBios;
-    Bool Resort;
-    Bool FixRom;
-    Bool NoConsole;
-    Bool BootOnly;
-    int  Verbose;
-};
-
-struct pio {
-    CARD8 (*inb)(CARD16);
-    CARD16 (*inw)(CARD16);
-    CARD32 (*inl)(CARD16);
-    void (*outb)(CARD16,CARD8);
-    void (*outw)(CARD16,CARD16);
-    void (*outl)(CARD16,CARD32);
-};
-
-struct regs86 {
-	long ebx;
-	long ecx;
-	long edx;
-	long esi;
-	long edi;
-	long ebp;
-	long eax;
-	long eip;
-	long esp;
-	unsigned short cs;
-	unsigned short ss;
-	unsigned short es;
-	unsigned short ds;
-	unsigned short fs;
-	unsigned short gs;
-    long eflags;
-};
-
-typedef struct {
-    CARD32 ax;
-    CARD32 bx;
-    CARD32 cx;
-    CARD32 dx;
-    CARD32 cs;
-    CARD32 es;
-    CARD32 ds;
-    CARD32 si;
-    CARD32 di;
-} i86biosRegs, *i86biosRegsPtr;
-
-typedef struct {
-    int fd;
-    int vt;
-} console;
-
-typedef struct {
-    void* address;
-    CARD8 orgval;
-} haltpoints;
-
-enum dev_type {  NONE, ISA, PCI };
-struct device {
-    Bool booted;
-    enum dev_type type;
-    union {
-      int none;
-      struct pci {
-	int bus;
-	int dev;
-	int func;
-      } pci;
-    } loc;
-};
-
-extern struct device Device;
-
-#ifdef __alpha__
-unsigned long _bus_base(void);
-extern void* vram_map;
-extern int sparse_shift;
-#endif
-
-extern struct pio P;
-extern struct config Config;
-#define IOPERM_BITS 1024
-extern int ioperm_list[IOPERM_BITS];
-
-extern void setup_io(void);
-extern void do_x86(unsigned long bios_start,i86biosRegsPtr regs);
-extern int run_bios_int(int num, struct regs86 *regs);
-extern CARD32 getIntVect(int num);
-CARD32 getIP(void);
-
-extern void call_boot(struct device *dev);
-extern void runINT(int num,i86biosRegsPtr Regs);
-extern void add_hlt(unsigned long addr);
-extern void del_hlt(int addr);
-extern void list_hlt();
-
-extern int port_rep_inb(CARD16 port, CARD8 *base, int d_f, CARD32 count);
-extern int port_rep_inw(CARD16 port, CARD16 *base, int d_f, CARD32 count);
-extern int port_rep_inl(CARD16 port, CARD32 *base, int d_f, CARD32 count);
-extern int port_rep_outb(CARD16 port, CARD8 *base, int d_f, CARD32 count);
-extern int port_rep_outw(CARD16 port, CARD16 *base, int d_f, CARD32 count);
-extern int port_rep_outl(CARD16 port, CARD32 *base, int d_f, CARD32 count);
-extern CARD8 p_inb(CARD16 port);
-extern CARD16 p_inw(CARD16 port);
-extern CARD32 p_inl(CARD16 port);
-extern void p_outb(CARD16 port, CARD8 val);
-extern void p_outw(CARD16 port, CARD16 val);
-extern void p_outl(CARD16 port, CARD32 val);
-#ifdef __alpha__
-extern CARD8 a_inb(CARD16 port);
-extern CARD16 a_inw(CARD16 port);
-extern void a_outb(CARD16 port, CARD8 val);
-extern void a_outw(CARD16 port, CARD16 val);
-#endif
-#ifdef __alpha__
-CARD8 mem_rb(CARD32 addr);
-CARD16 mem_rw(CARD32 addr);
-CARD32 mem_rl(CARD32 addr);
-void mem_wb(CARD32 addr, CARD8 val);
-void mem_ww(CARD32 addr, CARD16 val);
-void mem_wl(CARD32 addr, CARD32 val);
-#endif
-extern void io_statistics(void);
-extern void clear_stat(void);
-extern int int_handler(int num, struct regs86 *regs);
-
-extern console open_console(void);
-extern void close_console(console);
-
-extern void dprint(unsigned long start, unsigned long size);
-
-extern Bool logging;
-extern Bool nostdout;
-extern char* logfile;
-extern void logon(void* ptr);
-extern void logoff();
-extern void lprintf(const char *f, ...);
-
-#define MEM_FILE "/dev/mem"
-#define DEFAULT_V_BIOS 0xc0000
-#ifndef V_BIOS
-#define V_BIOS DEFAULT_V_BIOS
-#endif
-
-#ifdef __alpha__
-#define NEED_PCI_IO
-#endif
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/working_cards b/board/MAI/bios_emulator/scitech/src/v86bios/working_cards
deleted file mode 100644
index 7753f2495d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/working_cards
+++ /dev/null
@@ -1,7 +0,0 @@
-David Monro:                    Trident TGUI 9440
-                                Virge/VX (Diamond Stealth 3D 3400)   
-                                Riva TNT (Diamond Viper V550)   no vbios?
-Jarno Paananen <jpaana@s2.org>: Guillemot Maxigamer Xentor 32 
-                                (NVIDIA TNT2 Ultra)
-                                Creative Graphics Blaster Exxtreme 
-                                (Permedia 2) 
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c b/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c
deleted file mode 100644
index 9955a2bb67..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission.  The authors makes no representations
- * about the suitability of this software for any purpose.  It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-
-#define IF_MASK     0x00000200
-#define VIF_MASK    0x00080000  /* virtual interrupt flag */
-#define VIP_MASK    0x00100000  /* virtual interrupt pending */
-
-#include </usr/include/unistd.h>
-#include <errno.h>
-#include <asm/unistd.h>
-/*#include <syscall-list.h> */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#ifdef __alpha__
-#include <sys/io.h>
-#endif
-#include <signal.h>
-#include <setjmp.h>
-#include "AsmMacros.h"
-#include "v86bios.h"
-# define DEBUG
-#include "x86emu.h"
-#undef DEBUG
-
-#define M            _X86EMU_env
-#define CPU_REG(reg) M.x86.R_##reg
-
-struct pio P;
-
-void
-setup_io(void)
-{
-    if (!Config.PrintPort && !Config.IoStatistics) {
-
-#if defined (__i386__)
-    P.inb = (u8(*)(u16))inb;
-    P.inw = (u16(*)(u16))inw;
-    P.outb = (void(*)(u16,u8))outb;
-    P.outw = (void(*)(u16,u16))outw;
-#else
-    P.inb = p_inb;
-    P.inw = p_inw;
-    P.outb = p_outb;
-    P.outw = p_outw;
-#endif
-#if defined (__i386__) && ! defined(NEED_PCI_IO)
-    P.inl = (u32(*)(u16))inl;
-    P.outl = (void(*)(u16,u32))outl;
-#else
-    P.inl = p_inl;
-    P.outl = p_outl;
-#endif
-    } else {
-    P.inb = p_inb;
-    P.inw = p_inw;
-    P.inl = p_inl;
-    P.outb = p_outb;
-    P.outw = p_outw;
-    P.outl = p_outl;
-    }
-}
-
-void
-x86emu_do_int(int num)
-{
-    struct regs86 regs;
-
-    i_printf("int 0x%x received: ax:0x%x",num,CPU_REG(AX));
-    if (Config.PrintIp)
-	i_printf(" at: 0x%x\n",getIP());
-    else
-	i_printf("\n");
-
-    /* try to run bios interrupt */
-
-    /* if not installed fall back */
-#define COPY(x,y) regs.y = M.x86.x
-#define COPY_R(x,y) M.x86.x = regs.y
-
-    COPY(R_EAX,eax);
-    COPY(R_EBX,ebx);
-    COPY(R_ECX,ecx);
-    COPY(R_EDX,edx);
-    COPY(R_ESI,esi);
-    COPY(R_EDI,edi);
-    COPY(R_EBP,ebp);
-    COPY(R_EIP,eip);
-    COPY(R_ESP,esp);
-    COPY(R_CS,cs);
-    COPY(R_SS,ss);
-    COPY(R_DS,ds);
-    COPY(R_ES,es);
-    COPY(R_FS,fs);
-    COPY(R_GS,gs);
-    COPY(R_EFLG,eflags);
-
-    if (!(int_handler(num,&regs))) {
-	if (!run_bios_int(num,&regs))
-	    goto unknown_int;
-	else
-	    return;
-    }
-
-    COPY_R(R_EAX,eax);
-    COPY_R(R_EBX,ebx);
-    COPY_R(R_ECX,ecx);
-    COPY_R(R_EDX,edx);
-    COPY_R(R_ESI,esi);
-    COPY_R(R_EDI,edi);
-    COPY_R(R_EBP,ebp);
-    COPY_R(R_EIP,eip);
-    COPY_R(R_ESP,esp);
-    COPY_R(R_CS,cs);
-    COPY_R(R_SS,ss);
-    COPY_R(R_DS,ds);
-    COPY_R(R_ES,es);
-    COPY_R(R_FS,fs);
-    COPY_R(R_GS,gs);
-    COPY_R(R_EFLG,eflags);
-    return;
-
- unknown_int:
-    fprintf(stderr,"\nUnknown vm86_int: %X\n\n",num);
-    X86EMU_halt_sys();
-    return;
-
-#undef COPY
-#undef COPY_R
-}
-
-void
-setup_x86emu(unsigned long bios_start, i86biosRegsPtr regs)
-{
-    int i;
-    CARD32 eip;
-    CARD16 cs;
-    X86EMU_intrFuncs intFuncs[256];
-
-    X86EMU_pioFuncs pioFuncs = {
-	(u8(*)(u16))P.inb,
-	(u16(*)(u16))P.inw,
-	(u32(*)(u16))P.inl,
-	(void(*)(u16,u8))P.outb,
-	(void(*)(u16,u16))P.outw,
-	(void(*)(u16,u32))P.outl
-    };
-#ifdef __alpha__
-    X86EMU_memFuncs memFuncs = {
-      (u8(*)(u32))mem_rb,
-      (u16(*)(u32))mem_rw,
-      (u32(*)(u32))mem_rl,
-      (void(*)(u32,u8))mem_wb,
-      (void(*)(u32,u16))mem_ww,
-      (void(*)(u32,u32))mem_wl
-    };
-#endif
-    M.mem_base = 0;
-    M.mem_size = 1024*1024 + 1024;
-    /*  M.x86.debug = DEBUG_DISASSEMBLE_F | DEBUG_TRACE_F | DEBUG_DECODE_F; */
-    /*  M.x86.debug |= DEBUG_DECODE_F |  DEBUG_TRACE_F; */
-/*
- * For single step tracing compile x86emu with option -DDEBUG
- */
-    M.x86.debug = 0;
-    if (Config.PrintIp)
-	M.x86.debug = DEBUG_SAVE_CS_IP;
-
-    if (Config.Trace)
-	X86EMU_trace_on();
-
-    X86EMU_setupPioFuncs(&pioFuncs);
-#ifdef __alpha__
-    X86EMU_setupMemFuncs(&memFuncs);
-#endif
-    for (i=0;i<256;i++)
-	intFuncs[i] = x86emu_do_int;
-    X86EMU_setupIntrFuncs(intFuncs);
-
-    eip = bios_start & 0xFFFF;
-    cs = (bios_start & 0xFF0000) >> 4;
-
-    CPU_REG(EAX) = regs->ax;
-    CPU_REG(EBX) = regs->bx;
-    CPU_REG(ECX) = regs->cx;
-    CPU_REG(EDX) = regs->dx;
-    CPU_REG(ESI) = regs->si;
-    CPU_REG(EDI) = regs->di;
-    CPU_REG(EBP) = 0;
-    CPU_REG(EIP) = eip;
-    CPU_REG(CS) = cs;
-    CPU_REG(SP) = 0x100;
-    CPU_REG(SS) = 0x30;               /* This is the standard pc bios stack */
-    CPU_REG(ES) = regs->es;
-    CPU_REG(DS) = regs->ds;
-    CPU_REG(FS) = 0;
-    CPU_REG(GS) = 0;
-    CPU_REG(EFLG) |= (VIF_MASK | VIP_MASK | IF_MASK | 0x2);
-}
-
-void
-collect_bios_regs(i86biosRegsPtr regs)
-{
-    regs->ax = CPU_REG(EAX);
-    regs->bx = CPU_REG(EBX);
-    regs->cx = CPU_REG(ECX);
-    regs->dx = CPU_REG(EDX);
-    regs->es = CPU_REG(ES);
-    regs->ds = CPU_REG(DS);
-    regs->di = CPU_REG(EDI);
-    regs->si = CPU_REG(ESI);
-}
-
-static void
-do_x86emu(void)
-{
-    X86EMU_exec();
-}
-
-static jmp_buf x86_esc;
-static void
-vmexit(int unused)
-{
-    longjmp(x86_esc,1);
-}
-
-void
-do_x86(unsigned long bios_start, i86biosRegsPtr regs)
-{
-    static void (*org_handler)(int);
-
-    setup_x86emu(bios_start,regs);
-    if (setjmp(x86_esc) == 0) {
-	org_handler = signal(2,vmexit);
-	do_x86emu();
-	signal(2,org_handler);
-	collect_bios_regs(regs);
-    } else {
-	signal(2,org_handler);
-	printf("interrupted at 0x%x\n",((CARD16)CPU_REG(CS)) << 4
-	       | (CARD16)CPU_REG(EIP));
-    }
-}
-
-int
-run_bios_int(int num, struct regs86 *regs)
-{
-#ifdef V86BIOS_DEBUG
-    static int firsttime = 1;
-#endif
-    /* check if bios vector is initialized */
-    if (((CARD16*)0)[(num<<1)+1] == 0x0000) { /* SYS_BIOS_SEG ?*/
-#ifdef V86BIOS_DEBUG
-	i_printf("card BIOS not loaded\n");
-#endif
-	return 0;
-    }
-
-#ifdef V86BIOS_DEBUG
-    if (firsttime) {
-	dprint(0,0x3D0);
-	firsttime = 0;
-    }
-#endif
-
-    i_printf("calling card BIOS at: ");
-    i_printf("0x%x:%x\n",((CARD16 *) 0)[(num << 1) + 1],
-	     (CARD32)((CARD16 *) 0)[num << 1]);
-    X86EMU_prepareForInt(num);
-
-    return 1;
-}
-
-CARD32
-getIntVect(int num)
-{
-  return ((CARD32*)0)[num];
-}
-
-CARD32
-getIP(void)
-{
-    return (M.x86.saved_cs << 4) + M.x86.saved_ip;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE b/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE
deleted file mode 100644
index a3ede4a87d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE
+++ /dev/null
@@ -1,17 +0,0 @@
-                         License information
-                         -------------------
-
-The x86emu library is under a BSD style license, comaptible
-with the XFree86 and X licenses used by XFree86. The
-original x86emu libraries were under the GNU General Public
-License. Due to license incompatibilities between the GPL
-and the XFree86 license, the original authors of the code
-decided to allow a license change. If you have submitted
-code to the original x86emu project, and you don't agree
-with the license change, please contact us and let you
-know. Your code will be removed to comply with your wishes.
-
-If you have any questions about this, please send email to
-x86emu@linuxlabs.com or KendallB@scitechsoft.com for
-clarification.
-
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/debug.c b/board/MAI/bios_emulator/scitech/src/x86emu/debug.c
deleted file mode 100644
index 235e6ac146..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/debug.c
+++ /dev/null
@@ -1,443 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file contains the code to handle debugging of the
-*				emulator.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-#include <stdarg.h>
-#include <stdlib.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef DEBUG
-
-static void     print_encoded_bytes (u16 s, u16 o);
-static void     print_decoded_instruction (void);
-static int      parse_line (char *s, int *ps, int *n);
-
-/* should look something like debug's output. */
-void X86EMU_trace_regs (void)
-{
-	if (DEBUG_TRACE()) {
-		x86emu_dump_regs();
-    }
-	if (DEBUG_DECODE() && ! DEBUG_DECODE_NOPRINT()) {
-		printk("%04x:%04x ",M.x86.saved_cs, M.x86.saved_ip);
-		print_encoded_bytes( M.x86.saved_cs, M.x86.saved_ip);
-		print_decoded_instruction();
-    }
-}
-
-void X86EMU_trace_xregs (void)
-{
-	if (DEBUG_TRACE()) {
-		x86emu_dump_xregs();
-    }
-}
-
-void x86emu_just_disassemble (void)
-{
-    /*
-     * This routine called if the flag DEBUG_DISASSEMBLE is set kind
-     * of a hack!
-     */
-	printk("%04x:%04x ",M.x86.saved_cs, M.x86.saved_ip);
-	print_encoded_bytes( M.x86.saved_cs, M.x86.saved_ip);
-	print_decoded_instruction();
-}
-
-static void disassemble_forward (u16 seg, u16 off, int n)
-{
-	X86EMU_sysEnv tregs;
-	int i;
-	u8 op1;
-    /*
-     * hack, hack, hack.  What we do is use the exact machinery set up
-     * for execution, except that now there is an additional state
-     * flag associated with the "execution", and we are using a copy
-     * of the register struct.  All the major opcodes, once fully
-     * decoded, have the following two steps: TRACE_REGS(r,m);
-     * SINGLE_STEP(r,m); which disappear if DEBUG is not defined to
-     * the preprocessor.  The TRACE_REGS macro expands to:
-     *
-     * if (debug&DEBUG_DISASSEMBLE)
-     *     {just_disassemble(); goto EndOfInstruction;}
-     *     if (debug&DEBUG_TRACE) trace_regs(r,m);
-     *
-     * ......  and at the last line of the routine.
-     *
-     * EndOfInstruction: end_instr();
-     *
-     * Up to the point where TRACE_REG is expanded, NO modifications
-     * are done to any register EXCEPT the IP register, for fetch and
-     * decoding purposes.
-     *
-     * This was done for an entirely different reason, but makes a
-     * nice way to get the system to help debug codes.
-     */
-	tregs = M;
-    tregs.x86.R_IP = off;
-    tregs.x86.R_CS = seg;
-
-    /* reset the decoding buffers */
-    tregs.x86.enc_str_pos = 0;
-    tregs.x86.enc_pos = 0;
-
-    /* turn on the "disassemble only, no execute" flag */
-    tregs.x86.debug |= DEBUG_DISASSEMBLE_F;
-
-    /* DUMP NEXT n instructions to screen in straight_line fashion */
-    /*
-     * This looks like the regular instruction fetch stream, except
-     * that when this occurs, each fetched opcode, upon seeing the
-     * DEBUG_DISASSEMBLE flag set, exits immediately after decoding
-     * the instruction.  XXX --- CHECK THAT MEM IS NOT AFFECTED!!!
-     * Note the use of a copy of the register structure...
-     */
-    for (i=0; i<n; i++) {
-		op1 = (*sys_rdb)(((u32)M.x86.R_CS<<4) + (M.x86.R_IP++));
-		(x86emu_optab[op1])(op1);
-    }
-    /* end major hack mode. */
-}
-
-void x86emu_check_ip_access (void)
-{
-    /* NULL as of now */
-}
-
-void x86emu_check_sp_access (void)
-{
-}
-
-void x86emu_check_mem_access (u32 dummy)
-{
-	/*  check bounds, etc */
-}
-
-void x86emu_check_data_access (uint dummy1, uint dummy2)
-{
-	/*  check bounds, etc */
-}
-
-void x86emu_inc_decoded_inst_len (int x)
-{
-	M.x86.enc_pos += x;
-}
-
-void x86emu_decode_printf (char *x)
-{
-	sprintf(M.x86.decoded_buf+M.x86.enc_str_pos,"%s",x);
-	M.x86.enc_str_pos += strlen(x);
-}
-
-void x86emu_decode_printf2 (char *x, int y)
-{
-	char temp[100];
-	sprintf(temp,x,y);
-	sprintf(M.x86.decoded_buf+M.x86.enc_str_pos,"%s",temp);
-	M.x86.enc_str_pos += strlen(temp);
-}
-
-void x86emu_end_instr (void)
-{
-	M.x86.enc_str_pos = 0;
-	M.x86.enc_pos = 0;
-}
-
-static void print_encoded_bytes (u16 s, u16 o)
-{
-    int i;
-    char buf1[64];
-	for (i=0; i< M.x86.enc_pos; i++) {
-		sprintf(buf1+2*i,"%02x", fetch_data_byte_abs(s,o+i));
-    }
-	printk("%-20s",buf1);
-}
-
-static void print_decoded_instruction (void)
-{
-	printk("%s", M.x86.decoded_buf);
-}
-
-void x86emu_print_int_vect (u16 iv)
-{
-	u16 seg,off;
-
-	if (iv > 256) return;
-	seg   = fetch_data_word_abs(0,iv*4);
-	off   = fetch_data_word_abs(0,iv*4+2);
-	printk("%04x:%04x ", seg, off);
-}
-
-void X86EMU_dump_memory (u16 seg, u16 off, u32 amt)
-{
-    u32 start = off & 0xfffffff0;
-    u32 end  = (off+16) & 0xfffffff0;
-    u32 i;
-    u32 current;
-
-    current = start;
-    while (end <= off + amt) {
-	printk("%04x:%04x ", seg, start);
-	for (i=start; i< off; i++)
-	    printk("   ");
-	for (       ; i< end; i++)
-	    printk("%02x ", fetch_data_byte_abs(seg,i));
-	printk("\n");
-	start = end;
-	end = start + 16;
-    }
-}
-
-void x86emu_single_step (void)
-{
-    char s[1024];
-    int ps[10];
-    int ntok;
-    int cmd;
-    int done;
-		int segment;
-    int offset;
-    static int breakpoint;
-    static int noDecode = 1;
-
-    char *p;
-
-    if (DEBUG_BREAK()) {
-	if (M.x86.saved_ip != breakpoint) {
-	    return;
-	} else {
-	    M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
-	    M.x86.debug |= DEBUG_TRACE_F;
-	    M.x86.debug &= ~DEBUG_BREAK_F;
-	    print_decoded_instruction ();
-	    X86EMU_trace_regs();
-	}
-    }
-
-    done=0;
-    offset = M.x86.saved_ip;
-    while (!done) {
-	printk("-");
-	/*p = fgets(s, 1023, stdin); */
-	cons_gets(s);
-	cmd = parse_line(s, ps, &ntok);
-	switch(cmd) {
-	case 'u':
-	    disassemble_forward(M.x86.saved_cs,(u16)offset,10);
-	    break;
-	case 'd':
-	    if (ntok == 2) {
-		segment = M.x86.saved_cs;
-		offset = ps[1];
-		X86EMU_dump_memory(segment,(u16)offset,16);
-		offset += 16;
-	    } else if (ntok == 3) {
-		segment = ps[1];
-		offset = ps[2];
-		X86EMU_dump_memory(segment,(u16)offset,16);
-		offset += 16;
-	    } else {
-		segment = M.x86.saved_cs;
-		X86EMU_dump_memory(segment,(u16)offset,16);
-		offset += 16;
-	    }
-	    break;
-	case 'c':
-	    M.x86.debug ^= DEBUG_TRACECALL_F;
-	    break;
-	case 's':
-	    M.x86.debug ^= DEBUG_SVC_F | DEBUG_SYS_F | DEBUG_SYSINT_F;
-	    break;
-	case 'r':
-	    X86EMU_trace_regs();
-	    break;
-	case 'x':
-	    X86EMU_trace_xregs();
-	    break;
-	case 'g':
-	    if (ntok == 2) {
-		breakpoint = ps[1];
-		printk("breakpoint set to 0x%X\n", breakpoint);
-		if (noDecode) {
-		    M.x86.debug |= DEBUG_DECODE_NOPRINT_F;
-		} else {
-		    M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
-		}
-		M.x86.debug &= ~DEBUG_TRACE_F;
-		M.x86.debug |= DEBUG_BREAK_F;
-		done = 1;
-	    }
-	    break;
-	case 'q':
-	    M.x86.debug |= DEBUG_EXIT;
-	    return;
-	case 'P':
-	    noDecode = (noDecode)?0:1;
-	    printk("Toggled decoding to %s\n",(noDecode)?"FALSE":"TRUE");
-	    break;
-	case 't':
-	case 0:
-	    done = 1;
-	    break;
-	}
-    }
-}
-
-int X86EMU_trace_on(void)
-{
-	return M.x86.debug |= DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F;
-}
-
-int X86EMU_trace_off(void)
-{
-	return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F);
-}
-
-static int parse_line (char *s, int *ps, int *n)
-{
-    int cmd;
-
-    *n = 0;
-    while(*s == ' ' || *s == '\t') s++;
-    ps[*n] = *s;
-    switch (*s) {
-      case '\n':
-	*n += 1;
-	return 0;
-      default:
-	cmd = *s;
-	*n += 1;
-    }
-
-	while (1) {
-		while (*s != ' ' && *s != '\t' && *s != '\n')  s++;
-
-		if (*s == '\n')
-			return cmd;
-
-		while(*s == ' ' || *s == '\t') s++;
-
-		ps[*n]=atoi(s);
-		/*sscanf(s,"%x",&ps[*n]); */
-		*n += 1;
-	}
-}
-
-#endif /* DEBUG */
-
-void x86emu_dump_stack(void)
-{
-    int i;
-    printk("Stack: ");
-    for (i = 0; i<16; i++)
-    {
-	u8 x = fetch_data_byte_abs(M.x86.R_SS, M.x86.R_SP + i);
-	printk("%02x ", (int)x);
-    }
-    printk("\n");
-}
-
-void x86emu_dump_regs (void)
-{
-	printk("\tAX=%04x  ", M.x86.R_AX );
-	printk("BX=%04x  ", M.x86.R_BX );
-	printk("CX=%04x  ", M.x86.R_CX );
-	printk("DX=%04x  ", M.x86.R_DX );
-	printk("SP=%04x  ", M.x86.R_SP );
-	printk("BP=%04x  ", M.x86.R_BP );
-	printk("SI=%04x  ", M.x86.R_SI );
-	printk("DI=%04x\n", M.x86.R_DI );
-	printk("\tDS=%04x  ", M.x86.R_DS );
-	printk("ES=%04x  ", M.x86.R_ES );
-	printk("SS=%04x  ", M.x86.R_SS );
-	printk("CS=%04x  ", M.x86.R_CS );
-	printk("IP=%04x   ", M.x86.R_IP );
-	if (ACCESS_FLAG(F_OF))    printk("OV ");     /* CHECKED... */
-	else                        printk("NV ");
-	if (ACCESS_FLAG(F_DF))    printk("DN ");
-	else                        printk("UP ");
-	if (ACCESS_FLAG(F_IF))    printk("EI ");
-	else                        printk("DI ");
-	if (ACCESS_FLAG(F_SF))    printk("NG ");
-	else                        printk("PL ");
-	if (ACCESS_FLAG(F_ZF))    printk("ZR ");
-	else                        printk("NZ ");
-	if (ACCESS_FLAG(F_AF))    printk("AC ");
-	else                        printk("NA ");
-	if (ACCESS_FLAG(F_PF))    printk("PE ");
-	else                        printk("PO ");
-	if (ACCESS_FLAG(F_CF))    printk("CY ");
-	else                        printk("NC ");
-	printk("\n");
-	/*x86emu_dump_stack(); */
-}
-
-void x86emu_dump_xregs (void)
-{
-	printk("\tEAX=%08x  ", M.x86.R_EAX );
-	printk("EBX=%08x  ", M.x86.R_EBX );
-	printk("ECX=%08x  ", M.x86.R_ECX );
-	printk("EDX=%08x  \n", M.x86.R_EDX );
-	printk("\tESP=%08x  ", M.x86.R_ESP );
-	printk("EBP=%08x  ", M.x86.R_EBP );
-	printk("ESI=%08x  ", M.x86.R_ESI );
-	printk("EDI=%08x\n", M.x86.R_EDI );
-	printk("\tDS=%04x  ", M.x86.R_DS );
-	printk("ES=%04x  ", M.x86.R_ES );
-	printk("SS=%04x  ", M.x86.R_SS );
-	printk("CS=%04x  ", M.x86.R_CS );
-	printk("EIP=%08x\n\t", M.x86.R_EIP );
-	if (ACCESS_FLAG(F_OF))    printk("OV ");     /* CHECKED... */
-	else                        printk("NV ");
-	if (ACCESS_FLAG(F_DF))    printk("DN ");
-	else                        printk("UP ");
-	if (ACCESS_FLAG(F_IF))    printk("EI ");
-	else                        printk("DI ");
-	if (ACCESS_FLAG(F_SF))    printk("NG ");
-	else                        printk("PL ");
-	if (ACCESS_FLAG(F_ZF))    printk("ZR ");
-	else                        printk("NZ ");
-	if (ACCESS_FLAG(F_AF))    printk("AC ");
-	else                        printk("NA ");
-	if (ACCESS_FLAG(F_PF))    printk("PE ");
-	else                        printk("PO ");
-	if (ACCESS_FLAG(F_CF))    printk("CY ");
-	else                        printk("NC ");
-	printk("\n");
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/decode.c b/board/MAI/bios_emulator/scitech/src/x86emu/decode.c
deleted file mode 100644
index 832b1f5f2e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/decode.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file includes subroutines which are related to
-*				instruction decoding and accessess of immediate data via IP.  etc.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Handles any pending asychronous interrupts.
-****************************************************************************/
-static void x86emu_intr_handle(void)
-{
-	u8	intno;
-
-	if (M.x86.intr & INTR_SYNCH) {
-		intno = M.x86.intno;
-		if (_X86EMU_intrTab[intno]) {
-			(*_X86EMU_intrTab[intno])(intno);
-		} else {
-			push_word((u16)M.x86.R_FLG);
-			CLEAR_FLAG(F_IF);
-			CLEAR_FLAG(F_TF);
-			push_word(M.x86.R_CS);
-			M.x86.R_CS = mem_access_word(intno * 4 + 2);
-			push_word(M.x86.R_IP);
-			M.x86.R_IP = mem_access_word(intno * 4);
-			M.x86.intr = 0;
-		}
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-intrnum - Interrupt number to raise
-
-REMARKS:
-Raise the specified interrupt to be handled before the execution of the
-next instruction.
-****************************************************************************/
-void x86emu_intr_raise(
-	u8 intrnum)
-{
-	M.x86.intno = intrnum;
-	M.x86.intr |= INTR_SYNCH;
-}
-
-/****************************************************************************
-REMARKS:
-Main execution loop for the emulator. We return from here when the system
-halts, which is normally caused by a stack fault when we return from the
-original real mode call.
-****************************************************************************/
-void X86EMU_exec(void)
-{
-    u8 op1;
-
-    M.x86.intr = 0;
-    DB(x86emu_end_instr();)
-
-    for (;;) {
-	DB(if (CHECK_IP_FETCH()) x86emu_check_ip_access();)
-	/* If debugging, save the IP and CS values. */
-	SAVE_IP_CS(M.x86.R_CS, M.x86.R_IP);
-	INC_DECODED_INST_LEN(1);
-	if (M.x86.intr) {
-	    if (M.x86.intr & INTR_HALTED) {
-		DB(	printk("halted\n"); X86EMU_trace_regs();)
-		    return;
-	    }
-	    if (((M.x86.intr & INTR_SYNCH) && (M.x86.intno == 0 || M.x86.intno == 2)) ||
-		!ACCESS_FLAG(F_IF)) {
-		x86emu_intr_handle();
-	    }
-	}
-	op1 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
-	(*x86emu_optab[op1])(op1);
-	if (M.x86.debug & DEBUG_EXIT) {
-	    M.x86.debug &= ~DEBUG_EXIT;
-	    return;
-	}
-    }
-}
-
-/****************************************************************************
-REMARKS:
-Halts the system by setting the halted system flag.
-****************************************************************************/
-void X86EMU_halt_sys(void)
-{
-	M.x86.intr |= INTR_HALTED;
-}
-
-/****************************************************************************
-PARAMETERS:
-mod		- Mod value from decoded byte
-regh	- Reg h value from decoded byte
-regl	- Reg l value from decoded byte
-
-REMARKS:
-Raise the specified interrupt to be handled before the execution of the
-next instruction.
-
-NOTE: Do not inline this function, as (*sys_rdb) is already inline!
-****************************************************************************/
-void fetch_decode_modrm(
-	int *mod,
-	int *regh,
-	int *regl)
-{
-	int fetched;
-
-DB(	if (CHECK_IP_FETCH())
-	  x86emu_check_ip_access();)
-	fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
-	INC_DECODED_INST_LEN(1);
-	*mod  = (fetched >> 6) & 0x03;
-	*regh = (fetched >> 3) & 0x07;
-    *regl = (fetched >> 0) & 0x07;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate byte value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdb) is already inline!
-****************************************************************************/
-u8 fetch_byte_imm(void)
-{
-	u8 fetched;
-
-DB(	if (CHECK_IP_FETCH())
-		x86emu_check_ip_access();)
-	fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
-	INC_DECODED_INST_LEN(1);
-	return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate word value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdw) is already inline!
-****************************************************************************/
-u16 fetch_word_imm(void)
-{
-	u16	fetched;
-
-DB(	if (CHECK_IP_FETCH())
-		x86emu_check_ip_access();)
-	fetched = (*sys_rdw)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
-	M.x86.R_IP += 2;
-	INC_DECODED_INST_LEN(2);
-	return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate lone value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdw) is already inline!
-****************************************************************************/
-u32 fetch_long_imm(void)
-{
-	u32 fetched;
-
-DB(	if (CHECK_IP_FETCH())
-	  x86emu_check_ip_access();)
-	fetched = (*sys_rdl)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
-	M.x86.R_IP += 4;
-	INC_DECODED_INST_LEN(4);
-	return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Value of the default data segment
-
-REMARKS:
-Inline function that returns the default data segment for the current
-instruction.
-
-On the x86 processor, the default segment is not always DS if there is
-no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to
-addresses relative to SS (ie: on the stack). So, at the minimum, all
-decodings of addressing modes would have to set/clear a bit describing
-whether the access is relative to DS or SS.  That is the function of the
-cpu-state-varible M.x86.mode. There are several potential states:
-
-	repe prefix seen  (handled elsewhere)
-	repne prefix seen  (ditto)
-
-	cs segment override
-	ds segment override
-	es segment override
-	fs segment override
-	gs segment override
-	ss segment override
-
-	ds/ss select (in absense of override)
-
-Each of the above 7 items are handled with a bit in the mode field.
-****************************************************************************/
-_INLINE u32 get_data_segment(void)
-{
-#define	GET_SEGMENT(segment)
-	switch (M.x86.mode & SYSMODE_SEGMASK) {
-	  case 0:					/* default case: use ds register */
-	  case SYSMODE_SEGOVR_DS:
-	  case SYSMODE_SEGOVR_DS | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_DS;
-	  case SYSMODE_SEG_DS_SS:	/* non-overridden, use ss register */
-		return  M.x86.R_SS;
-	  case SYSMODE_SEGOVR_CS:
-	  case SYSMODE_SEGOVR_CS | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_CS;
-	  case SYSMODE_SEGOVR_ES:
-	  case SYSMODE_SEGOVR_ES | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_ES;
-	  case SYSMODE_SEGOVR_FS:
-	  case SYSMODE_SEGOVR_FS | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_FS;
-	  case SYSMODE_SEGOVR_GS:
-	  case SYSMODE_SEGOVR_GS | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_GS;
-	  case SYSMODE_SEGOVR_SS:
-	  case SYSMODE_SEGOVR_SS | SYSMODE_SEG_DS_SS:
-		return  M.x86.R_SS;
-	  default:
-#ifdef	DEBUG
-		printk("error: should not happen:  multiple overrides.\n");
-#endif
-		HALT_SYS();
-		return 0;
-	}
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to load data from
-
-RETURNS:
-Byte value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u8 fetch_data_byte(
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	return (*sys_rdb)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to load data from
-
-RETURNS:
-Word value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 fetch_data_word(
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	return (*sys_rdw)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to load data from
-
-RETURNS:
-Long value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 fetch_data_long(
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	return (*sys_rdl)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to load data from
-offset	- Offset to load data from
-
-RETURNS:
-Byte value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u8 fetch_data_byte_abs(
-	uint segment,
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	return (*sys_rdb)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to load data from
-offset	- Offset to load data from
-
-RETURNS:
-Word value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 fetch_data_word_abs(
-	uint segment,
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	return (*sys_rdw)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to load data from
-offset	- Offset to load data from
-
-RETURNS:
-Long value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 fetch_data_long_abs(
-	uint segment,
-	uint offset)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	return (*sys_rdl)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a word value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_byte(
-	uint offset,
-	u8 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	(*sys_wrb)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a word value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_word(
-	uint offset,
-	u16 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	(*sys_wrw)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a long value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_long(
-	uint offset,
-	u32 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
-	(*sys_wrl)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to store data at
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a byte value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_byte_abs(
-	uint segment,
-	uint offset,
-	u8 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	(*sys_wrb)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to store data at
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a word value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_word_abs(
-	uint segment,
-	uint offset,
-	u16 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	(*sys_wrw)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment	- Segment to store data at
-offset	- Offset to store data at
-val		- Value to store
-
-REMARKS:
-Writes a long value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_long_abs(
-	uint segment,
-	uint offset,
-	u32 val)
-{
-#ifdef DEBUG
-	if (CHECK_DATA_ACCESS())
-		x86emu_check_data_access(segment, offset);
-#endif
-	(*sys_wrl)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg	- Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for byte operands. Also enables the decoding of instructions.
-****************************************************************************/
-u8* decode_rm_byte_register(
-	int reg)
-{
-	switch (reg) {
-      case 0:
-		DECODE_PRINTF("AL");
-		return &M.x86.R_AL;
-	  case 1:
-		DECODE_PRINTF("CL");
-		return &M.x86.R_CL;
-	  case 2:
-		DECODE_PRINTF("DL");
-		return &M.x86.R_DL;
-	  case 3:
-		DECODE_PRINTF("BL");
-		return &M.x86.R_BL;
-	  case 4:
-		DECODE_PRINTF("AH");
-		return &M.x86.R_AH;
-	  case 5:
-		DECODE_PRINTF("CH");
-		return &M.x86.R_CH;
-	  case 6:
-		DECODE_PRINTF("DH");
-		return &M.x86.R_DH;
-	  case 7:
-		DECODE_PRINTF("BH");
-		return &M.x86.R_BH;
-	}
-	HALT_SYS();
-	return NULL;                /* NOT REACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg	- Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for word operands.  Also enables the decoding of instructions.
-****************************************************************************/
-u16* decode_rm_word_register(
-	int reg)
-{
-	switch (reg) {
-	  case 0:
-		DECODE_PRINTF("AX");
-		return &M.x86.R_AX;
-	  case 1:
-		DECODE_PRINTF("CX");
-		return &M.x86.R_CX;
-	  case 2:
-		DECODE_PRINTF("DX");
-		return &M.x86.R_DX;
-	  case 3:
-		DECODE_PRINTF("BX");
-		return &M.x86.R_BX;
-	  case 4:
-		DECODE_PRINTF("SP");
-		return &M.x86.R_SP;
-	  case 5:
-		DECODE_PRINTF("BP");
-		return &M.x86.R_BP;
-	  case 6:
-		DECODE_PRINTF("SI");
-		return &M.x86.R_SI;
-	  case 7:
-		DECODE_PRINTF("DI");
-		return &M.x86.R_DI;
-	}
-	HALT_SYS();
-    return NULL;                /* NOTREACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg	- Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for dword operands.  Also enables the decoding of instructions.
-****************************************************************************/
-u32* decode_rm_long_register(
-	int reg)
-{
-    switch (reg) {
-      case 0:
-		DECODE_PRINTF("EAX");
-		return &M.x86.R_EAX;
-	  case 1:
-		DECODE_PRINTF("ECX");
-		return &M.x86.R_ECX;
-	  case 2:
-		DECODE_PRINTF("EDX");
-		return &M.x86.R_EDX;
-	  case 3:
-		DECODE_PRINTF("EBX");
-		return &M.x86.R_EBX;
-	  case 4:
-		DECODE_PRINTF("ESP");
-		return &M.x86.R_ESP;
-	  case 5:
-		DECODE_PRINTF("EBP");
-		return &M.x86.R_EBP;
-	  case 6:
-		DECODE_PRINTF("ESI");
-		return &M.x86.R_ESI;
-	  case 7:
-		DECODE_PRINTF("EDI");
-		return &M.x86.R_EDI;
-	}
-	HALT_SYS();
-    return NULL;                /* NOTREACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg	- Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for word operands, modified from above for the weirdo
-special case of segreg operands.  Also enables the decoding of instructions.
-****************************************************************************/
-u16* decode_rm_seg_register(
-	int reg)
-{
-	switch (reg) {
-	  case 0:
-		DECODE_PRINTF("ES");
-		return &M.x86.R_ES;
-	  case 1:
-		DECODE_PRINTF("CS");
-		return &M.x86.R_CS;
-	  case 2:
-		DECODE_PRINTF("SS");
-		return &M.x86.R_SS;
-	  case 3:
-		DECODE_PRINTF("DS");
-		return &M.x86.R_DS;
-	  case 4:
-	  case 5:
-	  case 6:
-	  case 7:
-		DECODE_PRINTF("ILLEGAL SEGREG");
-		break;
-	}
-	HALT_SYS();
-	return NULL;                /* NOT REACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-rm	- RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=00 addressing.  Also enables the
-decoding of instructions.
-
-NOTE: 	The code which specifies the corresponding segment (ds vs ss)
-		below in the case of [BP+..].  The assumption here is that at the
-		point that this subroutine is called, the bit corresponding to
-		SYSMODE_SEG_DS_SS will be zero.  After every instruction
-		except the segment override instructions, this bit (as well
-		as any bits indicating segment overrides) will be clear.  So
-		if a SS access is needed, set this bit.  Otherwise, DS access
-		occurs (unless any of the segment override bits are set).
-****************************************************************************/
-unsigned decode_rm00_address(
-	int rm)
-{
-	unsigned offset;
-
-	if (M.x86.mode & SYSMODE_PREFIX_ADDR)
-	{
-	    switch (rm) {
-	    case 0:
-		DECODE_PRINTF("[EAX]");
-		return M.x86.R_EAX;
-	    case 1:
-		DECODE_PRINTF("[ECX]");
-		return M.x86.R_ECX;
-	    case 2:
-		DECODE_PRINTF("[EDX]");
-/*		M.x86.mode |= SYSMODE_SEG_DS_SS; */
-		return M.x86.R_EDX;
-	    case 3:
-		DECODE_PRINTF("[EBX]");
-/*		M.x86.mode |= SYSMODE_SEG_DS_SS; */
-		return M.x86.R_EBX;
-	    case 4:
-		printk("Unsupported SIB encoding\n");
-		HALT_SYS();
-		return 0;
-	    case 5:
-		offset = fetch_long_imm();
-		DECODE_PRINTF2("[%08x]", offset);
-		return offset;
-	    case 6:
-		DECODE_PRINTF("[ESI]");
-		return M.x86.R_ESI;
-	    case 7:
-		DECODE_PRINTF("[EDI]");
-		return M.x86.R_EDI;
-	    }
-	}
-	else
-	{
-	    switch (rm) {
-	    case 0:
-		DECODE_PRINTF("[BX+SI]");
-		return M.x86.R_BX + M.x86.R_SI;
-	    case 1:
-		DECODE_PRINTF("[BX+DI]");
-		return M.x86.R_BX + M.x86.R_DI;
-	    case 2:
-		DECODE_PRINTF("[BP+SI]");
-		M.x86.mode |= SYSMODE_SEG_DS_SS;
-		return M.x86.R_BP + M.x86.R_SI;
-	    case 3:
-		DECODE_PRINTF("[BP+DI]");
-		M.x86.mode |= SYSMODE_SEG_DS_SS;
-		return M.x86.R_BP + M.x86.R_DI;
-	    case 4:
-		DECODE_PRINTF("[SI]");
-		return M.x86.R_SI;
-	    case 5:
-		DECODE_PRINTF("[DI]");
-		return M.x86.R_DI;
-	    case 6:
-		offset = fetch_word_imm();
-		DECODE_PRINTF2("[%04x]", offset);
-		return offset;
-	    case 7:
-		DECODE_PRINTF("[BX]");
-		return M.x86.R_BX;
-	    }
-	}
-	HALT_SYS();
-    return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-rm	- RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=01 addressing.  Also enables the
-decoding of instructions.
-****************************************************************************/
-unsigned decode_rm01_address(
-	int rm)
-{
-    int displacement = (s8)fetch_byte_imm();
-    if (M.x86.mode & SYSMODE_PREFIX_ADDR)
-    {
-	switch (rm)
-	{
-	case 0:
-	    DECODE_PRINTF2("%d[EAX}", displacement);
-	    return M.x86.R_EAX + displacement;
-	case 1:
-	    DECODE_PRINTF2("%d[ECX]", displacement);
-	    return M.x86.R_ECX + displacement;
-	case 2:
-	    DECODE_PRINTF2("%d[EDX]", displacement);
-	    return M.x86.R_EDX + displacement;
-	case 3:
-	    DECODE_PRINTF2("%d[EBX]", displacement);
-	    return M.x86.R_EBX + displacement;
-	case 4:
-	    printk("Unsupported SIB addressing mode\n");
-	    HALT_SYS();
-	    return 0;
-	case 5:
-	    DECODE_PRINTF2("%d[EBP]", displacement);
-	    return M.x86.R_EBP + displacement;
-	case 6:
-	    DECODE_PRINTF2("%d[ESI]", displacement);
-	    return M.x86.R_ESI + displacement;
-	case 7:
-	    DECODE_PRINTF2("%d[EDI]", displacement);
-	    return M.x86.R_EDI + displacement;
-	}
-    }
-    else
-    {
-	switch (rm) {
-	case 0:
-	    DECODE_PRINTF2("%d[BX+SI]", displacement);
-	    return M.x86.R_BX + M.x86.R_SI + displacement;
-	case 1:
-	    DECODE_PRINTF2("%d[BX+DI]", displacement);
-	    return M.x86.R_BX + M.x86.R_DI + displacement;
-	case 2:
-	    DECODE_PRINTF2("%d[BP+SI]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return M.x86.R_BP + M.x86.R_SI + displacement;
-	case 3:
-	    DECODE_PRINTF2("%d[BP+DI]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return M.x86.R_BP + M.x86.R_DI + displacement;
-	case 4:
-	    DECODE_PRINTF2("%d[SI]", displacement);
-	    return M.x86.R_SI + displacement;
-	case 5:
-	    DECODE_PRINTF2("%d[DI]", displacement);
-	    return M.x86.R_DI + displacement;
-	case 6:
-	    DECODE_PRINTF2("%d[BP]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return M.x86.R_BP + displacement;
-	case 7:
-	    DECODE_PRINTF2("%d[BX]", displacement);
-	    return M.x86.R_BX + displacement;
-	}
-	HALT_SYS();
-    }
-    return 0;                   /* SHOULD NOT HAPPEN */
-}
-
-/****************************************************************************
-PARAMETERS:
-rm	- RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=10 addressing.  Also enables the
-decoding of instructions.
-****************************************************************************/
-unsigned decode_rm10_address(
-	int rm)
-{
-    if (M.x86.mode & SYSMODE_PREFIX_ADDR)
-    {
-	int displacement = (s32)fetch_long_imm();
-	switch (rm)
-	{
-	case 0:
-	    DECODE_PRINTF2("%d[EAX}", displacement);
-	    return M.x86.R_EAX + displacement;
-	case 1:
-	    DECODE_PRINTF2("%d[ECX]", displacement);
-	    return M.x86.R_ECX + displacement;
-	case 2:
-	    DECODE_PRINTF2("%d[EDX]", displacement);
-	    return M.x86.R_EDX + displacement;
-	case 3:
-	    DECODE_PRINTF2("%d[EBX]", displacement);
-	    return M.x86.R_EBX + displacement;
-	case 4:
-	    printk("Unsupported SIB addressing mode\n");
-	    HALT_SYS();
-	    return 0;
-	case 5:
-	    DECODE_PRINTF2("%d[EBP]", displacement);
-	    return M.x86.R_EBP + displacement;
-	case 6:
-	    DECODE_PRINTF2("%d[ESI]", displacement);
-	    return M.x86.R_ESI + displacement;
-	case 7:
-	    DECODE_PRINTF2("%d[EDI]", displacement);
-	    return M.x86.R_EDI + displacement;
-	}
-    }
-    else
-    {
-	int displacement = (s16)fetch_word_imm();
-	switch (rm) {
-	case 0:
-	    DECODE_PRINTF2("%d[BX+SI]", displacement);
-	    return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff;
-	case 1:
-	    DECODE_PRINTF2("%d[BX+DI]", displacement);
-	    return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff;
-	case 2:
-	    DECODE_PRINTF2("%d[BP+SI]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff;
-	case 3:
-	    DECODE_PRINTF2("%d[BP+DI]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff;
-	case 4:
-	    DECODE_PRINTF2("%d[SI]", displacement);
-	    return (M.x86.R_SI + displacement) & 0xffff;
-	case 5:
-	    DECODE_PRINTF2("%d[DI]", displacement);
-	    return (M.x86.R_DI + displacement) & 0xffff;
-	case 6:
-	    DECODE_PRINTF2("%d[BP]", displacement);
-	    M.x86.mode |= SYSMODE_SEG_DS_SS;
-	    return (M.x86.R_BP + displacement) & 0xffff;
-	case 7:
-	    DECODE_PRINTF2("%d[BX]", displacement);
-	    return (M.x86.R_BX + displacement) & 0xffff;
-	}
-    }
-    HALT_SYS();
-    return 0;
-    /*NOTREACHED */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c b/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c
deleted file mode 100644
index 7f7c345b34..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c
+++ /dev/null
@@ -1,945 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file contains the code to implement the decoding and
-*               emulation of the FPU instructions.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* opcode=0xd8 */
-void x86emuOp_esc_coprocess_d8(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("ESC D8\n");
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_d9_tab[] = {
-    "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
-    "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-
-    "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
-    "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-
-    "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
-    "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-};
-
-static char *x86emu_fpu_op_d9_tab1[] = {
-    "FLD\t", "FLD\t", "FLD\t", "FLD\t",
-    "FLD\t", "FLD\t", "FLD\t", "FLD\t",
-
-    "FXCH\t", "FXCH\t", "FXCH\t", "FXCH\t",
-    "FXCH\t", "FXCH\t", "FXCH\t", "FXCH\t",
-
-    "FNOP", "ESC_D9", "ESC_D9", "ESC_D9",
-    "ESC_D9", "ESC_D9", "ESC_D9", "ESC_D9",
-
-    "FSTP\t", "FSTP\t", "FSTP\t", "FSTP\t",
-    "FSTP\t", "FSTP\t", "FSTP\t", "FSTP\t",
-
-    "FCHS", "FABS", "ESC_D9", "ESC_D9",
-    "FTST", "FXAM", "ESC_D9", "ESC_D9",
-
-    "FLD1", "FLDL2T", "FLDL2E", "FLDPI",
-    "FLDLG2", "FLDLN2", "FLDZ", "ESC_D9",
-
-    "F2XM1", "FYL2X", "FPTAN", "FPATAN",
-    "FXTRACT", "ESC_D9", "FDECSTP", "FINCSTP",
-
-    "FPREM", "FYL2XP1", "FSQRT", "ESC_D9",
-    "FRNDINT", "FSCALE", "ESC_D9", "ESC_D9",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xd9 */
-void x86emuOp_esc_coprocess_d9(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (mod != 3) {
-	DECODE_PRINTINSTR32(x86emu_fpu_op_d9_tab, mod, rh, rl);
-    } else {
-	DECODE_PRINTF(x86emu_fpu_op_d9_tab1[(rh << 3) + rl]);
-    }
-#endif
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:                   /* register to register */
-		stkelem = (u8)rl;
-		if (rh < 4) {
-				DECODE_PRINTF2("ST(%d)\n", stkelem);
-		} else {
-				DECODE_PRINTF("\n");
-		}
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    /* execute */
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_R_fld(X86EMU_FPU_STKTOP, stkelem);
-	    break;
-	  case 1:
-	    x86emu_fpu_R_fxch(X86EMU_FPU_STKTOP, stkelem);
-	    break;
-	  case 2:
-	    switch (rl) {
-	      case 0:
-		x86emu_fpu_R_nop();
-		break;
-	      default:
-		x86emu_fpu_illegal();
-		break;
-	    }
-	  case 3:
-	    x86emu_fpu_R_fstp(X86EMU_FPU_STKTOP, stkelem);
-	    break;
-	  case 4:
-	    switch (rl) {
-	    case 0:
-		x86emu_fpu_R_fchs(X86EMU_FPU_STKTOP);
-		break;
-	    case 1:
-		x86emu_fpu_R_fabs(X86EMU_FPU_STKTOP);
-		break;
-	    case 4:
-		x86emu_fpu_R_ftst(X86EMU_FPU_STKTOP);
-		break;
-	    case 5:
-		x86emu_fpu_R_fxam(X86EMU_FPU_STKTOP);
-		break;
-	    default:
-		/* 2,3,6,7 */
-		x86emu_fpu_illegal();
-		break;
-	    }
-	    break;
-
-	  case 5:
-	    switch (rl) {
-	      case 0:
-		x86emu_fpu_R_fld1(X86EMU_FPU_STKTOP);
-		break;
-	      case 1:
-		x86emu_fpu_R_fldl2t(X86EMU_FPU_STKTOP);
-		break;
-	      case 2:
-		x86emu_fpu_R_fldl2e(X86EMU_FPU_STKTOP);
-		break;
-	      case 3:
-		x86emu_fpu_R_fldpi(X86EMU_FPU_STKTOP);
-		break;
-	      case 4:
-		x86emu_fpu_R_fldlg2(X86EMU_FPU_STKTOP);
-		break;
-	      case 5:
-		x86emu_fpu_R_fldln2(X86EMU_FPU_STKTOP);
-		break;
-	      case 6:
-		x86emu_fpu_R_fldz(X86EMU_FPU_STKTOP);
-		break;
-	      default:
-		/* 7 */
-		x86emu_fpu_illegal();
-		break;
-	    }
-	    break;
-
-	  case 6:
-	    switch (rl) {
-	      case 0:
-		x86emu_fpu_R_f2xm1(X86EMU_FPU_STKTOP);
-		break;
-	      case 1:
-		x86emu_fpu_R_fyl2x(X86EMU_FPU_STKTOP);
-		break;
-	      case 2:
-		x86emu_fpu_R_fptan(X86EMU_FPU_STKTOP);
-		break;
-	      case 3:
-		x86emu_fpu_R_fpatan(X86EMU_FPU_STKTOP);
-		break;
-	      case 4:
-		x86emu_fpu_R_fxtract(X86EMU_FPU_STKTOP);
-		break;
-	      case 5:
-		x86emu_fpu_illegal();
-		break;
-	      case 6:
-		x86emu_fpu_R_decstp();
-		break;
-	      case 7:
-		x86emu_fpu_R_incstp();
-		break;
-	    }
-	    break;
-
-	  case 7:
-	    switch (rl) {
-	      case 0:
-		x86emu_fpu_R_fprem(X86EMU_FPU_STKTOP);
-		break;
-	      case 1:
-		x86emu_fpu_R_fyl2xp1(X86EMU_FPU_STKTOP);
-		break;
-	      case 2:
-		x86emu_fpu_R_fsqrt(X86EMU_FPU_STKTOP);
-		break;
-	      case 3:
-		x86emu_fpu_illegal();
-		break;
-	      case 4:
-		x86emu_fpu_R_frndint(X86EMU_FPU_STKTOP);
-		break;
-	      case 5:
-		x86emu_fpu_R_fscale(X86EMU_FPU_STKTOP);
-		break;
-	      case 6:
-	      case 7:
-	      default:
-		x86emu_fpu_illegal();
-		break;
-	    }
-	    break;
-
-	  default:
-	    switch (rh) {
-	      case 0:
-		x86emu_fpu_M_fld(X86EMU_FPU_FLOAT, destoffset);
-		break;
-	      case 1:
-		x86emu_fpu_illegal();
-		break;
-	      case 2:
-		x86emu_fpu_M_fst(X86EMU_FPU_FLOAT, destoffset);
-		break;
-	      case 3:
-		x86emu_fpu_M_fstp(X86EMU_FPU_FLOAT, destoffset);
-		break;
-	      case 4:
-		x86emu_fpu_M_fldenv(X86EMU_FPU_WORD, destoffset);
-		break;
-	      case 5:
-		x86emu_fpu_M_fldcw(X86EMU_FPU_WORD, destoffset);
-		break;
-	      case 6:
-		x86emu_fpu_M_fstenv(X86EMU_FPU_WORD, destoffset);
-		break;
-	      case 7:
-		x86emu_fpu_M_fstcw(X86EMU_FPU_WORD, destoffset);
-		break;
-	    }
-	}
-    }
-#endif /* X86EMU_FPU_PRESENT */
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-char *x86emu_fpu_op_da_tab[] = {
-    "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
-    "FICOMP\tDWORD PTR ",
-    "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
-    "FIDIVR\tDWORD PTR ",
-
-    "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
-    "FICOMP\tDWORD PTR ",
-    "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
-    "FIDIVR\tDWORD PTR ",
-
-    "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
-    "FICOMP\tDWORD PTR ",
-    "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
-    "FIDIVR\tDWORD PTR ",
-
-    "ESC_DA ", "ESC_DA ", "ESC_DA ", "ESC_DA ",
-    "ESC_DA     ", "ESC_DA ", "ESC_DA   ", "ESC_DA ",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xda */
-void x86emuOp_esc_coprocess_da(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    DECODE_PRINTINSTR32(x86emu_fpu_op_da_tab, mod, rh, rl);
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:           /* register to register */
-		stkelem = (u8)rl;
-	DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    switch (mod) {
-      case 3:
-	x86emu_fpu_illegal();
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_iadd(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_M_imul(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 2:
-	    x86emu_fpu_M_icom(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_icomp(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_M_isub(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 5:
-	    x86emu_fpu_M_isubr(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 6:
-	    x86emu_fpu_M_idiv(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 7:
-	    x86emu_fpu_M_idivr(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-char *x86emu_fpu_op_db_tab[] = {
-    "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
-    "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-
-    "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
-    "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-
-    "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
-    "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdb */
-void x86emuOp_esc_coprocess_db(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (mod != 3) {
-	DECODE_PRINTINSTR32(x86emu_fpu_op_db_tab, mod, rh, rl);
-    } else if (rh == 4) {       /* === 11 10 0 nnn */
-	switch (rl) {
-	  case 0:
-	    DECODE_PRINTF("FENI\n");
-	    break;
-	  case 1:
-	    DECODE_PRINTF("FDISI\n");
-	    break;
-	  case 2:
-	    DECODE_PRINTF("FCLEX\n");
-	    break;
-	  case 3:
-	    DECODE_PRINTF("FINIT\n");
-	    break;
-	}
-    } else {
-	DECODE_PRINTF2("ESC_DB %0x\n", (mod << 6) + (rh << 3) + (rl));
-    }
-#endif /* DEBUG */
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	break;
-      case 3:                   /* register to register */
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    /* execute */
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 4:
-	    switch (rl) {
-	      case 0:
-		x86emu_fpu_R_feni();
-		break;
-	      case 1:
-		x86emu_fpu_R_fdisi();
-		break;
-	      case 2:
-		x86emu_fpu_R_fclex();
-		break;
-	      case 3:
-		x86emu_fpu_R_finit();
-		break;
-	      default:
-		x86emu_fpu_illegal();
-		break;
-	    }
-	    break;
-	  default:
-	    x86emu_fpu_illegal();
-	    break;
-	}
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_fild(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 2:
-	    x86emu_fpu_M_fist(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_fistp(X86EMU_FPU_SHORT, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 5:
-	    x86emu_fpu_M_fld(X86EMU_FPU_LDBL, destoffset);
-	    break;
-		      case 6:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 7:
-	    x86emu_fpu_M_fstp(X86EMU_FPU_LDBL, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-char *x86emu_fpu_op_dc_tab[] = {
-    "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
-    "FCOMP\tQWORD PTR ",
-    "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
-    "FDIVR\tQWORD PTR ",
-
-    "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
-    "FCOMP\tQWORD PTR ",
-    "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
-    "FDIVR\tQWORD PTR ",
-
-    "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
-    "FCOMP\tQWORD PTR ",
-    "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
-    "FDIVR\tQWORD PTR ",
-
-    "FADD\t", "FMUL\t", "FCOM\t", "FCOMP\t",
-    "FSUBR\t", "FSUB\t", "FDIVR\t", "FDIV\t",
-};
-#endif /* DEBUG */
-
-/* opcode=0xdc */
-void x86emuOp_esc_coprocess_dc(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    DECODE_PRINTINSTR32(x86emu_fpu_op_dc_tab, mod, rh, rl);
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:                   /* register to register */
-		stkelem = (u8)rl;
-	DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    /* execute */
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_R_fadd(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 1:
-	    x86emu_fpu_R_fmul(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 2:
-	    x86emu_fpu_R_fcom(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 3:
-	    x86emu_fpu_R_fcomp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 4:
-	    x86emu_fpu_R_fsubr(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 5:
-	    x86emu_fpu_R_fsub(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 6:
-	    x86emu_fpu_R_fdivr(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 7:
-	    x86emu_fpu_R_fdiv(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	}
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_fadd(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_M_fmul(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 2:
-	    x86emu_fpu_M_fcom(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_fcomp(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_M_fsub(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 5:
-	    x86emu_fpu_M_fsubr(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 6:
-	    x86emu_fpu_M_fdiv(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 7:
-	    x86emu_fpu_M_fdivr(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_dd_tab[] = {
-    "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
-    "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
-    "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
-    "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
-    "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
-    "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
-    "FFREE\t", "FXCH\t", "FST\t", "FSTP\t",
-    "ESC_DD\t2C,", "ESC_DD\t2D,", "ESC_DD\t2E,", "ESC_DD\t2F,",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdd */
-void x86emuOp_esc_coprocess_dd(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    DECODE_PRINTINSTR32(x86emu_fpu_op_dd_tab, mod, rh, rl);
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:                   /* register to register */
-		stkelem = (u8)rl;
-	DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_R_ffree(stkelem);
-	    break;
-	  case 1:
-	    x86emu_fpu_R_fxch(stkelem);
-	    break;
-	  case 2:
-	    x86emu_fpu_R_fst(stkelem);  /* register version */
-	    break;
-	  case 3:
-	    x86emu_fpu_R_fstp(stkelem); /* register version */
-	    break;
-	  default:
-	    x86emu_fpu_illegal();
-	    break;
-	}
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_fld(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 2:
-	    x86emu_fpu_M_fst(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_fstp(X86EMU_FPU_DOUBLE, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_M_frstor(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 5:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 6:
-	    x86emu_fpu_M_fsave(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 7:
-	    x86emu_fpu_M_fstsw(X86EMU_FPU_WORD, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_de_tab[] =
-{
-    "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
-    "FICOMP\tWORD PTR ",
-    "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
-    "FIDIVR\tWORD PTR ",
-
-    "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
-    "FICOMP\tWORD PTR ",
-    "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
-    "FIDIVR\tWORD PTR ",
-
-    "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
-    "FICOMP\tWORD PTR ",
-    "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
-    "FIDIVR\tWORD PTR ",
-
-    "FADDP\t", "FMULP\t", "FCOMP\t", "FCOMPP\t",
-    "FSUBRP\t", "FSUBP\t", "FDIVRP\t", "FDIVP\t",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xde */
-void x86emuOp_esc_coprocess_de(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    DECODE_PRINTINSTR32(x86emu_fpu_op_de_tab, mod, rh, rl);
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:                   /* register to register */
-		stkelem = (u8)rl;
-	DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_R_faddp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 1:
-	    x86emu_fpu_R_fmulp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 2:
-	    x86emu_fpu_R_fcomp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 3:
-	    if (stkelem == 1)
-	      x86emu_fpu_R_fcompp(stkelem, X86EMU_FPU_STKTOP);
-	    else
-	      x86emu_fpu_illegal();
-	    break;
-	  case 4:
-	    x86emu_fpu_R_fsubrp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 5:
-	    x86emu_fpu_R_fsubp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 6:
-	    x86emu_fpu_R_fdivrp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	  case 7:
-	    x86emu_fpu_R_fdivp(stkelem, X86EMU_FPU_STKTOP);
-	    break;
-	}
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_fiadd(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_M_fimul(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 2:
-	    x86emu_fpu_M_ficom(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_ficomp(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_M_fisub(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 5:
-	    x86emu_fpu_M_fisubr(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 6:
-	    x86emu_fpu_M_fidiv(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 7:
-	    x86emu_fpu_M_fidivr(X86EMU_FPU_WORD, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_df_tab[] = {
-    /* mod == 00 */
-    "FILD\tWORD PTR ", "ESC_DF\t39\n", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
-    "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
-    "FISTP\tQWORD PTR ",
-
-    /* mod == 01 */
-    "FILD\tWORD PTR ", "ESC_DF\t39 ", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
-    "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
-    "FISTP\tQWORD PTR ",
-
-    /* mod == 10 */
-    "FILD\tWORD PTR ", "ESC_DF\t39 ", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
-    "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
-    "FISTP\tQWORD PTR ",
-
-    /* mod == 11 */
-    "FFREE\t", "FXCH\t", "FST\t", "FSTP\t",
-    "ESC_DF\t3C,", "ESC_DF\t3D,", "ESC_DF\t3E,", "ESC_DF\t3F,"
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdf */
-void x86emuOp_esc_coprocess_df(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-	uint destoffset;
-    u8 stkelem;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    DECODE_PRINTINSTR32(x86emu_fpu_op_df_tab, mod, rh, rl);
-    switch (mod) {
-      case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	break;
-      case 3:                   /* register to register */
-		stkelem = (u8)rl;
-	DECODE_PRINTF2("\tST(%d)\n", stkelem);
-	break;
-    }
-#ifdef X86EMU_FPU_PRESENT
-    switch (mod) {
-      case 3:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_R_ffree(stkelem);
-	    break;
-	  case 1:
-	    x86emu_fpu_R_fxch(stkelem);
-	    break;
-	  case 2:
-	    x86emu_fpu_R_fst(stkelem);  /* register version */
-	    break;
-	  case 3:
-	    x86emu_fpu_R_fstp(stkelem); /* register version */
-	    break;
-	  default:
-	    x86emu_fpu_illegal();
-	    break;
-	}
-	break;
-      default:
-	switch (rh) {
-	  case 0:
-	    x86emu_fpu_M_fild(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 1:
-	    x86emu_fpu_illegal();
-	    break;
-	  case 2:
-	    x86emu_fpu_M_fist(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 3:
-	    x86emu_fpu_M_fistp(X86EMU_FPU_WORD, destoffset);
-	    break;
-	  case 4:
-	    x86emu_fpu_M_fbld(X86EMU_FPU_BSD, destoffset);
-	    break;
-	  case 5:
-	    x86emu_fpu_M_fild(X86EMU_FPU_LONG, destoffset);
-	    break;
-	  case 6:
-	    x86emu_fpu_M_fbstp(X86EMU_FPU_BSD, destoffset);
-	    break;
-	  case 7:
-	    x86emu_fpu_M_fistp(X86EMU_FPU_LONG, destoffset);
-	    break;
-	}
-    }
-#endif
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR_NO_TRACE();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile b/board/MAI/bios_emulator/scitech/src/x86emu/makefile
deleted file mode 100644
index 8ce2e9e848..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-#############################################################################
-#
-#						Realmode X86 Emulator Library
-#
-#            	Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-#  ========================================================================
-#
-#  Permission to use, copy, modify, distribute, and sell this software and
-#  its documentation for any purpose is hereby granted without fee,
-#  provided that the above copyright notice appear in all copies and that
-#  both that copyright notice and this permission notice appear in
-#  supporting documentation, and that the name of the authors not be used
-#  in advertising or publicity pertaining to distribution of the software
-#  without specific, written prior permission.  The authors makes no
-#  representations about the suitability of this software for any purpose.
-#  It is provided "as is" without express or implied warranty.
-#
-#  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-#  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-#  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-#  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-#  PERFORMANCE OF THIS SOFTWARE.
-#
-#  ========================================================================
-#
-# Descripton:   Generic makefile for the x86emu library. Requires
-#               the SciTech Software makefile definitions package to be
-#               installed, which uses the DMAKE make program.
-#
-#############################################################################
-
-.IMPORT .IGNORE: DEBUG
-
-#----------------------------------------------------------------------------
-# Define the lists of object files
-#----------------------------------------------------------------------------
-
-OBJECTS			= sys$O decode$O ops$O ops2$O prim_ops$O fpu$O debug$O
-CFLAGS      	+= -DSCITECH
-.IF $(DEBUG)
-CFLAGS			+= -DDEBUG
-.ENDIF
-LIBCLEAN  		= *.dll *.lib *.a
-LIBFILE 		= $(LP)x86emu$L
-
-#----------------------------------------------------------------------------
-# Sample test programs
-#----------------------------------------------------------------------------
-
-all: $(LIBFILE)
-
-validate$E: validate$O $(LIBFILE)
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ      =  validate$O $(OBJECTS)
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
deleted file mode 100644
index 0bce9a96e5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
+++ /dev/null
@@ -1,82 +0,0 @@
-#############################################################################
-#
-#						Realmode X86 Emulator Library
-#
-#            	Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-#  ========================================================================
-#
-#  Permission to use, copy, modify, distribute, and sell this software and
-#  its documentation for any purpose is hereby granted without fee,
-#  provided that the above copyright notice appear in all copies and that
-#  both that copyright notice and this permission notice appear in
-#  supporting documentation, and that the name of the authors not be used
-#  in advertising or publicity pertaining to distribution of the software
-#  without specific, written prior permission.  The authors makes no
-#  representations about the suitability of this software for any purpose.
-#  It is provided "as is" without express or implied warranty.
-#
-#  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-#  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-#  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-#  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-#  PERFORMANCE OF THIS SOFTWARE.
-#
-#  ========================================================================
-#
-# Descripton:   Linux specific makefile for the x86emu library.
-#
-#############################################################################
-
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
-
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-sys.o
-
-DEBUGOBJS=debug.d \
-          decode.d \
-	  fpu.d \
-	  ops.d \
-	  ops2.d \
-	  prim_ops.d \
-	  sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
-	$(AR) rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
-	$(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS   = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char  -fomit-frame-pointer -fPIC -ffixed-r14 -meabi
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
-	$(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
-	$(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
-	$(CC) -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
-	rm -f *.a *.o *.d
-
-validate:	validate.o libx86emu.a
-	$(CC) -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux
deleted file mode 100644
index f74b88d4c8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux
+++ /dev/null
@@ -1,81 +0,0 @@
-#############################################################################
-#
-#						Realmode X86 Emulator Library
-#
-#            	Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-#  ========================================================================
-#
-#  Permission to use, copy, modify, distribute, and sell this software and
-#  its documentation for any purpose is hereby granted without fee,
-#  provided that the above copyright notice appear in all copies and that
-#  both that copyright notice and this permission notice appear in
-#  supporting documentation, and that the name of the authors not be used
-#  in advertising or publicity pertaining to distribution of the software
-#  without specific, written prior permission.  The authors makes no
-#  representations about the suitability of this software for any purpose.
-#  It is provided "as is" without express or implied warranty.
-#
-#  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-#  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-#  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-#  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-#  PERFORMANCE OF THIS SOFTWARE.
-#
-#  ========================================================================
-#
-# Descripton:   Linux specific makefile for the x86emu library.
-#
-#############################################################################
-
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-pregs.o \
-sys.o
-
-DEBUGOBJS=debug.d \
-          decode.d \
-	  fpu.d \
-	  ops.d \
-	  ops2.d \
-	  prim_ops.d \
-	  pregs.d \
-	  sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
-	ar rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
-	ar rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS   = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
-	gcc -g -O -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
-	gcc -g -O -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
-	gcc -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
-	rm -f *.a *.o *.d
-
-validate:	validate.o libx86emu.a
-	gcc -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot
deleted file mode 100644
index af9ae1f589..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot
+++ /dev/null
@@ -1,80 +0,0 @@
-#############################################################################
-#
-#						Realmode X86 Emulator Library
-#
-#            	Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-#  ========================================================================
-#
-#  Permission to use, copy, modify, distribute, and sell this software and
-#  its documentation for any purpose is hereby granted without fee,
-#  provided that the above copyright notice appear in all copies and that
-#  both that copyright notice and this permission notice appear in
-#  supporting documentation, and that the name of the authors not be used
-#  in advertising or publicity pertaining to distribution of the software
-#  without specific, written prior permission.  The authors makes no
-#  representations about the suitability of this software for any purpose.
-#  It is provided "as is" without express or implied warranty.
-#
-#  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-#  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-#  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-#  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-#  PERFORMANCE OF THIS SOFTWARE.
-#
-#  ========================================================================
-#
-# Descripton:   Linux specific makefile for the x86emu library.
-#
-#############################################################################
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-sys.o
-
-DEBUGOBJS=debug.d \
-          decode.d \
-	  fpu.d \
-	  ops.d \
-	  ops2.d \
-	  prim_ops.d \
-	  sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
-	$(AR) rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
-	$(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS   = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char  -fomit-frame-pointer -fPIC -ffixed-r14 -meabi
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
-	$(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
-	$(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
-	$(CC) -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
-	rm -f *.a *.o *.d
-
-validate:	validate.o libx86emu.a
-	$(CC) -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/ops.c b/board/MAI/bios_emulator/scitech/src/x86emu/ops.c
deleted file mode 100644
index 2d4f93eee4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/ops.c
+++ /dev/null
@@ -1,11701 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file includes subroutines to implement the decoding
-*               and emulation of all the x86 processor instructions.
-*
-* There are approximately 250 subroutines in here, which correspond
-* to the 256 byte-"opcodes" found on the 8086.  The table which
-* dispatches this is found in the files optab.[ch].
-*
-* Each opcode proc has a comment preceeding it which gives it's table
-* address.  Several opcodes are missing (undefined) in the table.
-*
-* Each proc includes information for decoding (DECODE_PRINTF and
-* DECODE_PRINTF2), debugging (TRACE_REGS, SINGLE_STEP), and misc
-* functions (START_OF_INSTR, END_OF_INSTR).
-*
-* Many of the procedures are *VERY* similar in coding.  This has
-* allowed for a very large amount of code to be generated in a fairly
-* short amount of time (i.e. cut, paste, and modify).  The result is
-* that much of the code below could have been folded into subroutines
-* for a large reduction in size of this file.  The downside would be
-* that there would be a penalty in execution speed.  The file could
-* also have been *MUCH* larger by inlining certain functions which
-* were called.  This could have resulted even faster execution.  The
-* prime directive I used to decide whether to inline the code or to
-* modularize it, was basically: 1) no unnecessary subroutine calls,
-* 2) no routines more than about 200 lines in size, and 3) modularize
-* any code that I might not get right the first time.  The fetch_*
-* subroutines fall into the latter category.  The The decode_* fall
-* into the second category.  The coding of the "switch(mod){ .... }"
-* in many of the subroutines below falls into the first category.
-* Especially, the coding of {add,and,or,sub,...}_{byte,word}
-* subroutines are an especially glaring case of the third guideline.
-* Since so much of the code is cloned from other modules (compare
-* opcode #00 to opcode #01), making the basic operations subroutine
-* calls is especially important; otherwise mistakes in coding an
-* "add" would represent a nightmare in maintenance.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-op1 - Instruction op code
-
-REMARKS:
-Handles illegal opcodes.
-****************************************************************************/
-void x86emuOp_illegal_op(
-    u8 op1)
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("ILLEGAL X86 OPCODE\n");
-    TRACE_REGS();
-    printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n",
-	M.x86.R_CS, M.x86.R_IP-1,op1);
-    HALT_SYS();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x00
-****************************************************************************/
-void x86emuOp_add_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-    u8 *destreg, *srcreg;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = add_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = add_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = add_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = add_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x01
-****************************************************************************/
-void x86emuOp_add_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = add_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x02
-****************************************************************************/
-void x86emuOp_add_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = add_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = add_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = add_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = add_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x03
-****************************************************************************/
-void x86emuOp_add_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = add_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x04
-****************************************************************************/
-void x86emuOp_add_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADD\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = add_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x05
-****************************************************************************/
-void x86emuOp_add_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("ADD\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("ADD\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = add_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = add_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x06
-****************************************************************************/
-void x86emuOp_push_ES(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tES\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_ES);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x07
-****************************************************************************/
-void x86emuOp_pop_ES(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\tES\n");
-    TRACE_AND_STEP();
-    M.x86.R_ES = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x08
-****************************************************************************/
-void x86emuOp_or_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = or_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = or_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = or_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = or_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x09
-****************************************************************************/
-void x86emuOp_or_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = or_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0a
-****************************************************************************/
-void x86emuOp_or_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = or_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = or_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = or_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = or_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0b
-****************************************************************************/
-void x86emuOp_or_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = or_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0c
-****************************************************************************/
-void x86emuOp_or_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OR\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = or_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0d
-****************************************************************************/
-void x86emuOp_or_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("OR\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("OR\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = or_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = or_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0e
-****************************************************************************/
-void x86emuOp_push_CS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tCS\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_CS);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f. Escape for two-byte opcode (286 or better)
-****************************************************************************/
-void x86emuOp_two_byte(u8 X86EMU_UNUSED(op1))
-{
-    u8 op2 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
-    INC_DECODED_INST_LEN(1);
-    (*x86emu_optab2[op2])(op2);
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x10
-****************************************************************************/
-void x86emuOp_adc_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADC\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = adc_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = adc_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = adc_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = adc_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x11
-****************************************************************************/
-void x86emuOp_adc_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADC\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = adc_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x12
-****************************************************************************/
-void x86emuOp_adc_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADC\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = adc_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = adc_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = adc_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = adc_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x13
-****************************************************************************/
-void x86emuOp_adc_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADC\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = adc_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x14
-****************************************************************************/
-void x86emuOp_adc_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("ADC\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = adc_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x15
-****************************************************************************/
-void x86emuOp_adc_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("ADC\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("ADC\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = adc_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = adc_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x16
-****************************************************************************/
-void x86emuOp_push_SS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tSS\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_SS);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x17
-****************************************************************************/
-void x86emuOp_pop_SS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\tSS\n");
-    TRACE_AND_STEP();
-    M.x86.R_SS = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x18
-****************************************************************************/
-void x86emuOp_sbb_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SBB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sbb_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sbb_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sbb_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sbb_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x19
-****************************************************************************/
-void x86emuOp_sbb_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SBB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sbb_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1a
-****************************************************************************/
-void x86emuOp_sbb_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SBB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sbb_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sbb_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sbb_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sbb_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1b
-****************************************************************************/
-void x86emuOp_sbb_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SBB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sbb_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1c
-****************************************************************************/
-void x86emuOp_sbb_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SBB\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = sbb_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1d
-****************************************************************************/
-void x86emuOp_sbb_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("SBB\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("SBB\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = sbb_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = sbb_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1e
-****************************************************************************/
-void x86emuOp_push_DS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tDS\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_DS);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1f
-****************************************************************************/
-void x86emuOp_pop_DS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\tDS\n");
-    TRACE_AND_STEP();
-    M.x86.R_DS = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x20
-****************************************************************************/
-void x86emuOp_and_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AND\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = and_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = and_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = and_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = and_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x21
-****************************************************************************/
-void x86emuOp_and_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AND\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = and_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x22
-****************************************************************************/
-void x86emuOp_and_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AND\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = and_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = and_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = and_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = and_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x23
-****************************************************************************/
-void x86emuOp_and_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AND\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_long(*destreg, srcval);
-	    break;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_word(*destreg, srcval);
-	    break;
-	}
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = and_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x24
-****************************************************************************/
-void x86emuOp_and_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AND\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = and_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x25
-****************************************************************************/
-void x86emuOp_and_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("AND\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("AND\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = and_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = and_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x26
-****************************************************************************/
-void x86emuOp_segovr_ES(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("ES:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_ES;
-    /*
-     * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
-     * opcode subroutines we do not want to do this.
-     */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x27
-****************************************************************************/
-void x86emuOp_daa(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("DAA\n");
-    TRACE_AND_STEP();
-    M.x86.R_AL = daa_byte(M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x28
-****************************************************************************/
-void x86emuOp_sub_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SUB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sub_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sub_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = sub_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sub_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x29
-****************************************************************************/
-void x86emuOp_sub_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SUB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = sub_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2a
-****************************************************************************/
-void x86emuOp_sub_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SUB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sub_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sub_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sub_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = sub_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2b
-****************************************************************************/
-void x86emuOp_sub_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SUB\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = sub_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2c
-****************************************************************************/
-void x86emuOp_sub_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SUB\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = sub_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2d
-****************************************************************************/
-void x86emuOp_sub_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("SUB\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("SUB\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = sub_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = sub_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2e
-****************************************************************************/
-void x86emuOp_segovr_CS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("CS:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_CS;
-    /* note no DECODE_CLEAR_SEGOVR here. */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2f
-****************************************************************************/
-void x86emuOp_das(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("DAS\n");
-    TRACE_AND_STEP();
-    M.x86.R_AL = das_byte(M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x30
-****************************************************************************/
-void x86emuOp_xor_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XOR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = xor_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = xor_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = xor_byte(destval, *srcreg);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = xor_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x31
-****************************************************************************/
-void x86emuOp_xor_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XOR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_long(destval, *srcreg);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = xor_word(destval, *srcreg);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x32
-****************************************************************************/
-void x86emuOp_xor_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XOR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = xor_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = xor_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = xor_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = xor_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x33
-****************************************************************************/
-void x86emuOp_xor_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XOR\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = xor_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x34
-****************************************************************************/
-void x86emuOp_xor_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XOR\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    M.x86.R_AL = xor_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x35
-****************************************************************************/
-void x86emuOp_xor_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XOR\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("XOR\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = xor_long(M.x86.R_EAX, srcval);
-    } else {
-	M.x86.R_AX = xor_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x36
-****************************************************************************/
-void x86emuOp_segovr_SS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("SS:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_SS;
-    /* no DECODE_CLEAR_SEGOVR ! */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x37
-****************************************************************************/
-void x86emuOp_aaa(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("AAA\n");
-    TRACE_AND_STEP();
-    M.x86.R_AX = aaa_word(M.x86.R_AX);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x38
-****************************************************************************/
-void x86emuOp_cmp_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-    u8 *destreg, *srcreg;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMP\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(destval, *srcreg);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(destval, *srcreg);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(destval, *srcreg);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x39
-****************************************************************************/
-void x86emuOp_cmp_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMP\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(destval, *srcreg);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(destval, *srcreg);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(destval, *srcreg);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3a
-****************************************************************************/
-void x86emuOp_cmp_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMP\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(*destreg, srcval);
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(*destreg, srcval);
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(*destreg, srcval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	cmp_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3b
-****************************************************************************/
-void x86emuOp_cmp_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMP\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(*destreg, srcval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(*destreg, srcval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(*destreg, srcval);
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(*destreg, srcval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    cmp_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3c
-****************************************************************************/
-void x86emuOp_cmp_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMP\tAL,");
-    srcval = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    cmp_byte(M.x86.R_AL, srcval);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3d
-****************************************************************************/
-void x86emuOp_cmp_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("CMP\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("CMP\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	cmp_long(M.x86.R_EAX, srcval);
-    } else {
-	cmp_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3e
-****************************************************************************/
-void x86emuOp_segovr_DS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("DS:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_DS;
-    /* NO DECODE_CLEAR_SEGOVR! */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3f
-****************************************************************************/
-void x86emuOp_aas(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("AAS\n");
-    TRACE_AND_STEP();
-    M.x86.R_AX = aas_word(M.x86.R_AX);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x40
-****************************************************************************/
-void x86emuOp_inc_AX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tEAX\n");
-    } else {
-	DECODE_PRINTF("INC\tAX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = inc_long(M.x86.R_EAX);
-    } else {
-	M.x86.R_AX = inc_word(M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x41
-****************************************************************************/
-void x86emuOp_inc_CX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tECX\n");
-    } else {
-	DECODE_PRINTF("INC\tCX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ECX = inc_long(M.x86.R_ECX);
-    } else {
-	M.x86.R_CX = inc_word(M.x86.R_CX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x42
-****************************************************************************/
-void x86emuOp_inc_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tEDX\n");
-    } else {
-	DECODE_PRINTF("INC\tDX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDX = inc_long(M.x86.R_EDX);
-    } else {
-	M.x86.R_DX = inc_word(M.x86.R_DX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x43
-****************************************************************************/
-void x86emuOp_inc_BX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tEBX\n");
-    } else {
-	DECODE_PRINTF("INC\tBX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBX = inc_long(M.x86.R_EBX);
-    } else {
-	M.x86.R_BX = inc_word(M.x86.R_BX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x44
-****************************************************************************/
-void x86emuOp_inc_SP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tESP\n");
-    } else {
-	DECODE_PRINTF("INC\tSP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESP = inc_long(M.x86.R_ESP);
-    } else {
-	M.x86.R_SP = inc_word(M.x86.R_SP);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x45
-****************************************************************************/
-void x86emuOp_inc_BP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tEBP\n");
-    } else {
-	DECODE_PRINTF("INC\tBP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBP = inc_long(M.x86.R_EBP);
-    } else {
-	M.x86.R_BP = inc_word(M.x86.R_BP);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x46
-****************************************************************************/
-void x86emuOp_inc_SI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tESI\n");
-    } else {
-	DECODE_PRINTF("INC\tSI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESI = inc_long(M.x86.R_ESI);
-    } else {
-	M.x86.R_SI = inc_word(M.x86.R_SI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x47
-****************************************************************************/
-void x86emuOp_inc_DI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INC\tEDI\n");
-    } else {
-	DECODE_PRINTF("INC\tDI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDI = inc_long(M.x86.R_EDI);
-    } else {
-	M.x86.R_DI = inc_word(M.x86.R_DI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x48
-****************************************************************************/
-void x86emuOp_dec_AX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tEAX\n");
-    } else {
-	DECODE_PRINTF("DEC\tAX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = dec_long(M.x86.R_EAX);
-    } else {
-	M.x86.R_AX = dec_word(M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x49
-****************************************************************************/
-void x86emuOp_dec_CX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tECX\n");
-    } else {
-	DECODE_PRINTF("DEC\tCX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ECX = dec_long(M.x86.R_ECX);
-    } else {
-	M.x86.R_CX = dec_word(M.x86.R_CX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4a
-****************************************************************************/
-void x86emuOp_dec_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tEDX\n");
-    } else {
-	DECODE_PRINTF("DEC\tDX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDX = dec_long(M.x86.R_EDX);
-    } else {
-	M.x86.R_DX = dec_word(M.x86.R_DX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4b
-****************************************************************************/
-void x86emuOp_dec_BX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tEBX\n");
-    } else {
-	DECODE_PRINTF("DEC\tBX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBX = dec_long(M.x86.R_EBX);
-    } else {
-	M.x86.R_BX = dec_word(M.x86.R_BX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4c
-****************************************************************************/
-void x86emuOp_dec_SP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tESP\n");
-    } else {
-	DECODE_PRINTF("DEC\tSP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESP = dec_long(M.x86.R_ESP);
-    } else {
-	M.x86.R_SP = dec_word(M.x86.R_SP);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4d
-****************************************************************************/
-void x86emuOp_dec_BP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tEBP\n");
-    } else {
-	DECODE_PRINTF("DEC\tBP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBP = dec_long(M.x86.R_EBP);
-    } else {
-	M.x86.R_BP = dec_word(M.x86.R_BP);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4e
-****************************************************************************/
-void x86emuOp_dec_SI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tESI\n");
-    } else {
-	DECODE_PRINTF("DEC\tSI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESI = dec_long(M.x86.R_ESI);
-    } else {
-	M.x86.R_SI = dec_word(M.x86.R_SI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4f
-****************************************************************************/
-void x86emuOp_dec_DI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("DEC\tEDI\n");
-    } else {
-	DECODE_PRINTF("DEC\tDI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDI = dec_long(M.x86.R_EDI);
-    } else {
-	M.x86.R_DI = dec_word(M.x86.R_DI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x50
-****************************************************************************/
-void x86emuOp_push_AX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tEAX\n");
-    } else {
-	DECODE_PRINTF("PUSH\tAX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_EAX);
-    } else {
-	push_word(M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x51
-****************************************************************************/
-void x86emuOp_push_CX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tECX\n");
-    } else {
-	DECODE_PRINTF("PUSH\tCX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_ECX);
-    } else {
-	push_word(M.x86.R_CX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x52
-****************************************************************************/
-void x86emuOp_push_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tEDX\n");
-    } else {
-	DECODE_PRINTF("PUSH\tDX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_EDX);
-    } else {
-	push_word(M.x86.R_DX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x53
-****************************************************************************/
-void x86emuOp_push_BX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tEBX\n");
-    } else {
-	DECODE_PRINTF("PUSH\tBX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_EBX);
-    } else {
-	push_word(M.x86.R_BX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x54
-****************************************************************************/
-void x86emuOp_push_SP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tESP\n");
-    } else {
-	DECODE_PRINTF("PUSH\tSP\n");
-    }
-    TRACE_AND_STEP();
-	/* Always push (E)SP, since we are emulating an i386 and above
-	 * processor. This is necessary as some BIOS'es use this to check
-	 * what type of processor is in the system.
-	 */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		push_long(M.x86.R_ESP);
-	} else {
-		push_word((u16)(M.x86.R_SP));
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x55
-****************************************************************************/
-void x86emuOp_push_BP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tEBP\n");
-    } else {
-	DECODE_PRINTF("PUSH\tBP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_EBP);
-    } else {
-	push_word(M.x86.R_BP);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x56
-****************************************************************************/
-void x86emuOp_push_SI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tESI\n");
-    } else {
-	DECODE_PRINTF("PUSH\tSI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_ESI);
-    } else {
-	push_word(M.x86.R_SI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x57
-****************************************************************************/
-void x86emuOp_push_DI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSH\tEDI\n");
-    } else {
-	DECODE_PRINTF("PUSH\tDI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(M.x86.R_EDI);
-    } else {
-	push_word(M.x86.R_DI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x58
-****************************************************************************/
-void x86emuOp_pop_AX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tEAX\n");
-    } else {
-	DECODE_PRINTF("POP\tAX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = pop_long();
-    } else {
-	M.x86.R_AX = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x59
-****************************************************************************/
-void x86emuOp_pop_CX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tECX\n");
-    } else {
-	DECODE_PRINTF("POP\tCX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ECX = pop_long();
-    } else {
-	M.x86.R_CX = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5a
-****************************************************************************/
-void x86emuOp_pop_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tEDX\n");
-    } else {
-	DECODE_PRINTF("POP\tDX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDX = pop_long();
-    } else {
-	M.x86.R_DX = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5b
-****************************************************************************/
-void x86emuOp_pop_BX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tEBX\n");
-    } else {
-	DECODE_PRINTF("POP\tBX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBX = pop_long();
-    } else {
-	M.x86.R_BX = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5c
-****************************************************************************/
-void x86emuOp_pop_SP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tESP\n");
-    } else {
-	DECODE_PRINTF("POP\tSP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESP = pop_long();
-    } else {
-	M.x86.R_SP = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5d
-****************************************************************************/
-void x86emuOp_pop_BP(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tEBP\n");
-    } else {
-	DECODE_PRINTF("POP\tBP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBP = pop_long();
-    } else {
-	M.x86.R_BP = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5e
-****************************************************************************/
-void x86emuOp_pop_SI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tESI\n");
-    } else {
-	DECODE_PRINTF("POP\tSI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESI = pop_long();
-    } else {
-	M.x86.R_SI = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5f
-****************************************************************************/
-void x86emuOp_pop_DI(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POP\tEDI\n");
-    } else {
-	DECODE_PRINTF("POP\tDI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDI = pop_long();
-    } else {
-	M.x86.R_DI = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x60
-****************************************************************************/
-void x86emuOp_push_all(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSHAD\n");
-    } else {
-	DECODE_PRINTF("PUSHA\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	u32 old_sp = M.x86.R_ESP;
-
-	push_long(M.x86.R_EAX);
-	push_long(M.x86.R_ECX);
-	push_long(M.x86.R_EDX);
-	push_long(M.x86.R_EBX);
-	push_long(old_sp);
-	push_long(M.x86.R_EBP);
-	push_long(M.x86.R_ESI);
-	push_long(M.x86.R_EDI);
-    } else {
-	u16 old_sp = M.x86.R_SP;
-
-	push_word(M.x86.R_AX);
-	push_word(M.x86.R_CX);
-	push_word(M.x86.R_DX);
-	push_word(M.x86.R_BX);
-	push_word(old_sp);
-	push_word(M.x86.R_BP);
-	push_word(M.x86.R_SI);
-	push_word(M.x86.R_DI);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x61
-****************************************************************************/
-void x86emuOp_pop_all(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POPAD\n");
-    } else {
-	DECODE_PRINTF("POPA\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDI = pop_long();
-	M.x86.R_ESI = pop_long();
-	M.x86.R_EBP = pop_long();
-	M.x86.R_ESP += 4;              /* skip ESP */
-	M.x86.R_EBX = pop_long();
-	M.x86.R_EDX = pop_long();
-	M.x86.R_ECX = pop_long();
-	M.x86.R_EAX = pop_long();
-    } else {
-	M.x86.R_DI = pop_word();
-	M.x86.R_SI = pop_word();
-	M.x86.R_BP = pop_word();
-	M.x86.R_SP += 2;               /* skip SP */
-	M.x86.R_BX = pop_word();
-	M.x86.R_DX = pop_word();
-	M.x86.R_CX = pop_word();
-	M.x86.R_AX = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/*opcode 0x62   ILLEGAL OP, calls x86emuOp_illegal_op() */
-/*opcode 0x63   ILLEGAL OP, calls x86emuOp_illegal_op() */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x64
-****************************************************************************/
-void x86emuOp_segovr_FS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("FS:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_FS;
-    /*
-     * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
-     * opcode subroutines we do not want to do this.
-     */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x65
-****************************************************************************/
-void x86emuOp_segovr_GS(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("GS:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_SEGOVR_GS;
-    /*
-     * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
-     * opcode subroutines we do not want to do this.
-     */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x66 - prefix for 32-bit register
-****************************************************************************/
-void x86emuOp_prefix_data(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("DATA:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_PREFIX_DATA;
-    /* note no DECODE_CLEAR_SEGOVR here. */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x67 - prefix for 32-bit address
-****************************************************************************/
-void x86emuOp_prefix_addr(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("ADDR:\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_PREFIX_ADDR;
-    /* note no DECODE_CLEAR_SEGOVR here. */
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x68
-****************************************************************************/
-void x86emuOp_push_word_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 imm;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	imm = fetch_long_imm();
-    } else {
-	imm = fetch_word_imm();
-    }
-    DECODE_PRINTF2("PUSH\t%x\n", imm);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(imm);
-    } else {
-	push_word((u16)imm);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x69
-****************************************************************************/
-void x86emuOp_imul_word_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("IMUL\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-	    s32 imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-	    s16 imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-	    s32 imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-	    s16 imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-	    s32 imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-	    s16 imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-	    u32 res_lo,res_hi;
-	    s32 imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg,*srcreg;
-	    u32 res;
-	    s16 imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    res = (s16)*srcreg * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6a
-****************************************************************************/
-void x86emuOp_push_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
-    s16 imm;
-
-    START_OF_INSTR();
-    imm = (s8)fetch_byte_imm();
-    DECODE_PRINTF2("PUSH\t%d\n", imm);
-    TRACE_AND_STEP();
-    push_word(imm);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6b
-****************************************************************************/
-void x86emuOp_imul_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    s8  imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("IMUL\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    res = (s16)srcval * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg,*srcreg;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    imm = fetch_byte_imm();
-	    DECODE_PRINTF2(",%d\n", (s32)imm);
-	    res = (s16)*srcreg * (s16)imm;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6c
-****************************************************************************/
-void x86emuOp_ins_byte(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("INSB\n");
-    ins(1);
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6d
-****************************************************************************/
-void x86emuOp_ins_word(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("INSD\n");
-	ins(4);
-    } else {
-	DECODE_PRINTF("INSW\n");
-	ins(2);
-    }
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6e
-****************************************************************************/
-void x86emuOp_outs_byte(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("OUTSB\n");
-    outs(1);
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6f
-****************************************************************************/
-void x86emuOp_outs_word(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("OUTSD\n");
-	outs(4);
-    } else {
-	DECODE_PRINTF("OUTSW\n");
-	outs(2);
-    }
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x70
-****************************************************************************/
-void x86emuOp_jump_near_O(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if overflow flag is set */
-    START_OF_INSTR();
-    DECODE_PRINTF("JO\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_OF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x71
-****************************************************************************/
-void x86emuOp_jump_near_NO(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if overflow is not set */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNO\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!ACCESS_FLAG(F_OF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x72
-****************************************************************************/
-void x86emuOp_jump_near_B(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if carry flag is set. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JB\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_CF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x73
-****************************************************************************/
-void x86emuOp_jump_near_NB(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if carry flag is clear. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNB\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!ACCESS_FLAG(F_CF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x74
-****************************************************************************/
-void x86emuOp_jump_near_Z(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if zero flag is set. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JZ\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_ZF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x75
-****************************************************************************/
-void x86emuOp_jump_near_NZ(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if zero flag is clear. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNZ\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!ACCESS_FLAG(F_ZF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x76
-****************************************************************************/
-void x86emuOp_jump_near_BE(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if carry flag is set or if the zero
-       flag is set. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JBE\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x77
-****************************************************************************/
-void x86emuOp_jump_near_NBE(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if carry flag is clear and if the zero
-       flag is clear */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNBE\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF)))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x78
-****************************************************************************/
-void x86emuOp_jump_near_S(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if sign flag is set */
-    START_OF_INSTR();
-    DECODE_PRINTF("JS\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_SF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x79
-****************************************************************************/
-void x86emuOp_jump_near_NS(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if sign flag is clear */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNS\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!ACCESS_FLAG(F_SF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7a
-****************************************************************************/
-void x86emuOp_jump_near_P(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if parity flag is set (even parity) */
-    START_OF_INSTR();
-    DECODE_PRINTF("JP\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_PF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7b
-****************************************************************************/
-void x86emuOp_jump_near_NP(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-
-    /* jump to byte offset if parity flag is clear (odd parity) */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNP\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (!ACCESS_FLAG(F_PF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7c
-****************************************************************************/
-void x86emuOp_jump_near_L(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-    int sf, of;
-
-    /* jump to byte offset if sign flag not equal to overflow flag. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JL\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    sf = ACCESS_FLAG(F_SF) != 0;
-    of = ACCESS_FLAG(F_OF) != 0;
-    if (sf ^ of)
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7d
-****************************************************************************/
-void x86emuOp_jump_near_NL(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-    int sf, of;
-
-    /* jump to byte offset if sign flag not equal to overflow flag. */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNL\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    sf = ACCESS_FLAG(F_SF) != 0;
-    of = ACCESS_FLAG(F_OF) != 0;
-    /* note: inverse of above, but using == instead of xor. */
-    if (sf == of)
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7e
-****************************************************************************/
-void x86emuOp_jump_near_LE(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-    int sf, of;
-
-    /* jump to byte offset if sign flag not equal to overflow flag
-       or the zero flag is set */
-    START_OF_INSTR();
-    DECODE_PRINTF("JLE\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    sf = ACCESS_FLAG(F_SF) != 0;
-    of = ACCESS_FLAG(F_OF) != 0;
-    if ((sf ^ of) || ACCESS_FLAG(F_ZF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7f
-****************************************************************************/
-void x86emuOp_jump_near_NLE(u8 X86EMU_UNUSED(op1))
-{
-    s8 offset;
-    u16 target;
-    int sf, of;
-
-    /* jump to byte offset if sign flag equal to overflow flag.
-       and the zero flag is clear */
-    START_OF_INSTR();
-    DECODE_PRINTF("JNLE\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + (s16)offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    sf = ACCESS_FLAG(F_SF) != 0;
-    of = ACCESS_FLAG(F_OF) != 0;
-    if ((sf == of) && !ACCESS_FLAG(F_ZF))
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-static u8 (*opc80_byte_operation[])(u8 d, u8 s) =
-{
-    add_byte,           /* 00 */
-    or_byte,            /* 01 */
-    adc_byte,           /* 02 */
-    sbb_byte,           /* 03 */
-    and_byte,           /* 04 */
-    sub_byte,           /* 05 */
-    xor_byte,           /* 06 */
-    cmp_byte,           /* 07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x80
-****************************************************************************/
-void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 imm;
-    u8 destval;
-
-    /*
-     * Weirdo special case instruction format.  Part of the opcode
-     * held below in "RH".  Doubly nested case would result, except
-     * that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ADD\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("OR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("ADC\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("SBB\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("AND\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SUB\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("XOR\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("CMP\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2("%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc80_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2("%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc80_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2("%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc80_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2("%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc80_byte_operation[rh]) (*destreg, imm);
-	if (rh != 7)
-	    *destreg = destval;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-static u16 (*opc81_word_operation[])(u16 d, u16 s) =
-{
-    add_word,           /*00 */
-    or_word,            /*01 */
-    adc_word,           /*02 */
-    sbb_word,           /*03 */
-    and_word,           /*04 */
-    sub_word,           /*05 */
-    xor_word,           /*06 */
-    cmp_word,           /*07 */
-};
-
-static u32 (*opc81_long_operation[])(u32 d, u32 s) =
-{
-    add_long,           /*00 */
-    or_long,            /*01 */
-    adc_long,           /*02 */
-    sbb_long,           /*03 */
-    and_long,           /*04 */
-    sub_long,           /*05 */
-    xor_long,           /*06 */
-    cmp_long,           /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x81
-****************************************************************************/
-void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    /*
-     * Weirdo special case instruction format.  Part of the opcode
-     * held below in "RH".  Doubly nested case would result, except
-     * that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ADD\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("OR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("ADC\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("SBB\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("AND\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SUB\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("XOR\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("CMP\t");
-	    break;
-	}
-    }
-#endif
-    /*
-     * Know operation, decode the mod byte to find the addressing
-     * mode.
-     */
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 destval,imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_long_operation[rh]) (*destreg, imm);
-	    if (rh != 7)
-		*destreg = destval;
-	} else {
-	    u16 *destreg;
-	    u16 destval,imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2("%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc81_word_operation[rh]) (*destreg, imm);
-	    if (rh != 7)
-		*destreg = destval;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-static u8 (*opc82_byte_operation[])(u8 s, u8 d) =
-{
-    add_byte,           /*00 */
-    or_byte,            /*01 */ /*YYY UNUSED ???? */
-    adc_byte,           /*02 */
-    sbb_byte,           /*03 */
-    and_byte,           /*04 */ /*YYY UNUSED ???? */
-    sub_byte,           /*05 */
-    xor_byte,           /*06 */ /*YYY UNUSED ???? */
-    cmp_byte,           /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x82
-****************************************************************************/
-void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 imm;
-    u8 destval;
-
-    /*
-     * Weirdo special case instruction format.  Part of the opcode
-     * held below in "RH".  Doubly nested case would result, except
-     * that the decoded instruction Similar to opcode 81, except that
-     * the immediate byte is sign extended to a word length.
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ADD\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("OR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("ADC\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("SBB\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("AND\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SUB\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("XOR\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("CMP\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc82_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc82_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	destval = fetch_data_byte(destoffset);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc82_byte_operation[rh]) (destval, imm);
-	if (rh != 7)
-	    store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", imm);
-	TRACE_AND_STEP();
-	destval = (*opc82_byte_operation[rh]) (*destreg, imm);
-	if (rh != 7)
-	    *destreg = destval;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-static u16 (*opc83_word_operation[])(u16 s, u16 d) =
-{
-    add_word,           /*00 */
-    or_word,            /*01 */ /*YYY UNUSED ???? */
-    adc_word,           /*02 */
-    sbb_word,           /*03 */
-    and_word,           /*04 */ /*YYY UNUSED ???? */
-    sub_word,           /*05 */
-    xor_word,           /*06 */ /*YYY UNUSED ???? */
-    cmp_word,           /*07 */
-};
-
-static u32 (*opc83_long_operation[])(u32 s, u32 d) =
-{
-    add_long,           /*00 */
-    or_long,            /*01 */ /*YYY UNUSED ???? */
-    adc_long,           /*02 */
-    sbb_long,           /*03 */
-    and_long,           /*04 */ /*YYY UNUSED ???? */
-    sub_long,           /*05 */
-    xor_long,           /*06 */ /*YYY UNUSED ???? */
-    cmp_long,           /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x83
-****************************************************************************/
-void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    /*
-     * Weirdo special case instruction format.  Part of the opcode
-     * held below in "RH".  Doubly nested case would result, except
-     * that the decoded instruction Similar to opcode 81, except that
-     * the immediate byte is sign extended to a word length.
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-       switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ADD\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("OR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("ADC\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("SBB\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("AND\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SUB\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("XOR\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("CMP\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    destval = fetch_data_long(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    destval = fetch_data_word(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    destval = fetch_data_long(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    destval = fetch_data_word(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval,imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    destval = fetch_data_long(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_long_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_long(destoffset, destval);
-	} else {
-	    u16 destval,imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    destval = fetch_data_word(destoffset);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_word_operation[rh]) (destval, imm);
-	    if (rh != 7)
-		store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 destval,imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_long_operation[rh]) (*destreg, imm);
-	    if (rh != 7)
-		*destreg = destval;
-	} else {
-	    u16 *destreg;
-	    u16 destval,imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    imm = (s8) fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    destval = (*opc83_word_operation[rh]) (*destreg, imm);
-	    if (rh != 7)
-		*destreg = destval;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x84
-****************************************************************************/
-void x86emuOp_test_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("TEST\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	test_byte(destval, *srcreg);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	test_byte(destval, *srcreg);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	test_byte(destval, *srcreg);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	test_byte(*destreg, *srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x85
-****************************************************************************/
-void x86emuOp_test_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("TEST\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_word(destval, *srcreg);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_word(destval, *srcreg);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_long(destval, *srcreg);
-	} else {
-	    u16 destval;
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_word(destval, *srcreg);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_long(*destreg, *srcreg);
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    test_word(*destreg, *srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x86
-****************************************************************************/
-void x86emuOp_xchg_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-    u8 destval;
-    u8 tmp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XCHG\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	tmp = *srcreg;
-	*srcreg = destval;
-	destval = tmp;
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	tmp = *srcreg;
-	*srcreg = destval;
-	destval = tmp;
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	destval = fetch_data_byte(destoffset);
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	tmp = *srcreg;
-	*srcreg = destval;
-	destval = tmp;
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	tmp = *srcreg;
-	*srcreg = *destreg;
-	*destreg = tmp;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x87
-****************************************************************************/
-void x86emuOp_xchg_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XCHG\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-	    u32 destval,tmp;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 *srcreg;
-	    u16 destval,tmp;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-	    u32 destval,tmp;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 *srcreg;
-	    u16 destval,tmp;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-	    u32 destval,tmp;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_long(destoffset);
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 *srcreg;
-	    u16 destval,tmp;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    destval = fetch_data_word(destoffset);
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = destval;
-	    destval = tmp;
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-	    u32 tmp;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = *destreg;
-	    *destreg = tmp;
-	} else {
-	    u16 *destreg,*srcreg;
-	    u16 tmp;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    tmp = *srcreg;
-	    *srcreg = *destreg;
-	    *destreg = tmp;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x88
-****************************************************************************/
-void x86emuOp_mov_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, *srcreg);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, *srcreg);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, *srcreg);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = *srcreg;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x89
-****************************************************************************/
-void x86emuOp_mov_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, *srcreg);
-	} else {
-	    u16 *srcreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, *srcreg);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, *srcreg);
-	} else {
-	    u16 *srcreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, *srcreg);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, *srcreg);
-	} else {
-	    u16 *srcreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, *srcreg);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	} else {
-	    u16 *destreg,*srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8a
-****************************************************************************/
-void x86emuOp_mov_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg, *srcreg;
-    uint srcoffset;
-    u8 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 1:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 2:
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_byte(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = *srcreg;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8b
-****************************************************************************/
-void x86emuOp_mov_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg, *srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	} else {
-	    u16 *destreg, *srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8c
-****************************************************************************/
-void x86emuOp_mov_word_RM_SR(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u16 *destreg, *srcreg;
-    uint destoffset;
-    u16 destval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = *srcreg;
-	store_data_word(destoffset, destval);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = *srcreg;
-	store_data_word(destoffset, destval);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",");
-	srcreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	destval = *srcreg;
-	store_data_word(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_WORD_REGISTER(rl);
-	DECODE_PRINTF(",");
-	srcreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = *srcreg;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8d
-****************************************************************************/
-void x86emuOp_lea_word_R_M(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u16 *srcreg;
-    uint destoffset;
-
-/*
- * TODO: Need to handle address size prefix!
- *
- * lea  eax,[eax+ebx*2] ??
- */
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LEA\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	srcreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*srcreg = (u16)destoffset;
-	break;
-    case 1:
-	srcreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*srcreg = (u16)destoffset;
-	break;
-    case 2:
-	srcreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*srcreg = (u16)destoffset;
-	break;
-    case 3:                     /* register to register */
-	/* undefined.  Do nothing. */
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8e
-****************************************************************************/
-void x86emuOp_mov_word_SR_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u16 *destreg, *srcreg;
-    uint srcoffset;
-    u16 srcval;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 1:
-	destreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 2:
-	destreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 3:                     /* register to register */
-	destreg = decode_rm_seg_register(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_WORD_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = *srcreg;
-	break;
-    }
-    /*
-     * Clean up, and reset all the R_xSP pointers to the correct
-     * locations.  This is about 3x too much overhead (doing all the
-     * segreg ptrs when only one is needed, but this instruction
-     * *cannot* be that common, and this isn't too much work anyway.
-     */
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8f
-****************************************************************************/
-void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    if (rh != 0) {
-	DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
-	HALT_SYS();
-    }
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_long();
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_word();
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_long();
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_word();
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_long();
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    destval = pop_word();
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = pop_long();
-	} else {
-	    u16 *destreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = pop_word();
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x90
-****************************************************************************/
-void x86emuOp_nop(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("NOP\n");
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x91
-****************************************************************************/
-void x86emuOp_xchg_word_AX_CX(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,ECX\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,CX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_ECX;
-	M.x86.R_ECX = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_CX;
-	M.x86.R_CX = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x92
-****************************************************************************/
-void x86emuOp_xchg_word_AX_DX(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,EDX\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,DX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_EDX;
-	M.x86.R_EDX = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_DX;
-	M.x86.R_DX = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x93
-****************************************************************************/
-void x86emuOp_xchg_word_AX_BX(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,EBX\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,BX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_EBX;
-	M.x86.R_EBX = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_BX;
-	M.x86.R_BX = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x94
-****************************************************************************/
-void x86emuOp_xchg_word_AX_SP(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,ESP\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,SP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_ESP;
-	M.x86.R_ESP = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_SP;
-	M.x86.R_SP = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x95
-****************************************************************************/
-void x86emuOp_xchg_word_AX_BP(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,EBP\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,BP\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_EBP;
-	M.x86.R_EBP = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_BP;
-	M.x86.R_BP = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x96
-****************************************************************************/
-void x86emuOp_xchg_word_AX_SI(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,ESI\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,SI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_ESI;
-	M.x86.R_ESI = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_SI;
-	M.x86.R_SI = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x97
-****************************************************************************/
-void x86emuOp_xchg_word_AX_DI(u8 X86EMU_UNUSED(op1))
-{
-    u32 tmp;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("XCHG\tEAX,EDI\n");
-    } else {
-	DECODE_PRINTF("XCHG\tAX,DI\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	tmp = M.x86.R_EAX;
-	M.x86.R_EAX = M.x86.R_EDI;
-	M.x86.R_EDI = tmp;
-    } else {
-	tmp = M.x86.R_AX;
-	M.x86.R_AX = M.x86.R_DI;
-	M.x86.R_DI = (u16)tmp;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x98
-****************************************************************************/
-void x86emuOp_cbw(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("CWDE\n");
-    } else {
-	DECODE_PRINTF("CBW\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	if (M.x86.R_AX & 0x8000) {
-	    M.x86.R_EAX |= 0xffff0000;
-	} else {
-	    M.x86.R_EAX &= 0x0000ffff;
-	}
-    } else {
-	if (M.x86.R_AL & 0x80) {
-	    M.x86.R_AH = 0xff;
-	} else {
-	    M.x86.R_AH = 0x0;
-	}
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x99
-****************************************************************************/
-void x86emuOp_cwd(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("CDQ\n");
-    } else {
-	DECODE_PRINTF("CWD\n");
-    }
-    DECODE_PRINTF("CWD\n");
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	if (M.x86.R_EAX & 0x80000000) {
-	    M.x86.R_EDX = 0xffffffff;
-	} else {
-	    M.x86.R_EDX = 0x0;
-	}
-    } else {
-	if (M.x86.R_AX & 0x8000) {
-	    M.x86.R_DX = 0xffff;
-	} else {
-	    M.x86.R_DX = 0x0;
-	}
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9a
-****************************************************************************/
-void x86emuOp_call_far_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 farseg, faroff;
-
-    START_OF_INSTR();
-	DECODE_PRINTF("CALL\t");
-	faroff = fetch_word_imm();
-	farseg = fetch_word_imm();
-	DECODE_PRINTF2("%04x:", farseg);
-	DECODE_PRINTF2("%04x\n", faroff);
-	CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, farseg, faroff, "FAR ");
-
-    /* XXX
-     *
-     * Hooked interrupt vectors calling into our "BIOS" will cause
-     * problems unless all intersegment stuff is checked for BIOS
-     * access.  Check needed here.  For moment, let it alone.
-     */
-    TRACE_AND_STEP();
-    push_word(M.x86.R_CS);
-    M.x86.R_CS = farseg;
-    push_word(M.x86.R_IP);
-    M.x86.R_IP = faroff;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9b
-****************************************************************************/
-void x86emuOp_wait(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("WAIT");
-    TRACE_AND_STEP();
-    /* NADA.  */
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9c
-****************************************************************************/
-void x86emuOp_pushf_word(u8 X86EMU_UNUSED(op1))
-{
-    u32 flags;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("PUSHFD\n");
-    } else {
-	DECODE_PRINTF("PUSHF\n");
-    }
-    TRACE_AND_STEP();
-
-    /* clear out *all* bits not representing flags, and turn on real bits */
-    flags = (M.x86.R_EFLG & F_MSK) | F_ALWAYS_ON;
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	push_long(flags);
-    } else {
-	push_word((u16)flags);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9d
-****************************************************************************/
-void x86emuOp_popf_word(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("POPFD\n");
-    } else {
-	DECODE_PRINTF("POPF\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EFLG = pop_long();
-    } else {
-	M.x86.R_FLG = pop_word();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9e
-****************************************************************************/
-void x86emuOp_sahf(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("SAHF\n");
-    TRACE_AND_STEP();
-    /* clear the lower bits of the flag register */
-    M.x86.R_FLG &= 0xffffff00;
-    /* or in the AH register into the flags register */
-    M.x86.R_FLG |= M.x86.R_AH;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9f
-****************************************************************************/
-void x86emuOp_lahf(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("LAHF\n");
-    TRACE_AND_STEP();
-	M.x86.R_AH = (u8)(M.x86.R_FLG & 0xff);
-    /*undocumented TC++ behavior??? Nope.  It's documented, but
-       you have too look real hard to notice it. */
-    M.x86.R_AH |= 0x2;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa0
-****************************************************************************/
-void x86emuOp_mov_AL_M_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 offset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tAL,");
-    offset = fetch_word_imm();
-    DECODE_PRINTF2("[%04x]\n", offset);
-    TRACE_AND_STEP();
-    M.x86.R_AL = fetch_data_byte(offset);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa1
-****************************************************************************/
-void x86emuOp_mov_AX_M_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 offset;
-
-    START_OF_INSTR();
-    offset = fetch_word_imm();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF2("MOV\tEAX,[%04x]\n", offset);
-    } else {
-	DECODE_PRINTF2("MOV\tAX,[%04x]\n", offset);
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = fetch_data_long(offset);
-    } else {
-	M.x86.R_AX = fetch_data_word(offset);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa2
-****************************************************************************/
-void x86emuOp_mov_M_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 offset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    offset = fetch_word_imm();
-    DECODE_PRINTF2("[%04x],AL\n", offset);
-    TRACE_AND_STEP();
-    store_data_byte(offset, M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa3
-****************************************************************************/
-void x86emuOp_mov_M_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 offset;
-
-    START_OF_INSTR();
-    offset = fetch_word_imm();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF2("MOV\t[%04x],EAX\n", offset);
-    } else {
-	DECODE_PRINTF2("MOV\t[%04x],AX\n", offset);
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	store_data_long(offset, M.x86.R_EAX);
-    } else {
-	store_data_word(offset, M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa4
-****************************************************************************/
-void x86emuOp_movs_byte(u8 X86EMU_UNUSED(op1))
-{
-    u8  val;
-    u32 count;
-    int inc;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOVS\tBYTE\n");
-    if (ACCESS_FLAG(F_DF))   /* down */
-	inc = -1;
-    else
-	inc = 1;
-    TRACE_AND_STEP();
-    count = 1;
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	count = M.x86.R_CX;
-	M.x86.R_CX = 0;
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    }
-    while (count--) {
-	val = fetch_data_byte(M.x86.R_SI);
-	store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, val);
-	M.x86.R_SI += inc;
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa5
-****************************************************************************/
-void x86emuOp_movs_word(u8 X86EMU_UNUSED(op1))
-{
-    u32 val;
-    int inc;
-    u32 count;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOVS\tDWORD\n");
-	if (ACCESS_FLAG(F_DF))      /* down */
-	    inc = -4;
-	else
-	    inc = 4;
-    } else {
-	DECODE_PRINTF("MOVS\tWORD\n");
-	if (ACCESS_FLAG(F_DF))      /* down */
-	    inc = -2;
-	else
-	    inc = 2;
-    }
-    TRACE_AND_STEP();
-    count = 1;
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	count = M.x86.R_CX;
-	M.x86.R_CX = 0;
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    }
-    while (count--) {
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    val = fetch_data_long(M.x86.R_SI);
-	    store_data_long_abs(M.x86.R_ES, M.x86.R_DI, val);
-	} else {
-	    val = fetch_data_word(M.x86.R_SI);
-	    store_data_word_abs(M.x86.R_ES, M.x86.R_DI, (u16)val);
-	}
-	M.x86.R_SI += inc;
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa6
-****************************************************************************/
-void x86emuOp_cmps_byte(u8 X86EMU_UNUSED(op1))
-{
-    s8 val1, val2;
-    int inc;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("CMPS\tBYTE\n");
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_DF))   /* down */
-	inc = -1;
-    else
-	inc = 1;
-
-    if (M.x86.mode & SYSMODE_PREFIX_REPE) {
-	/* REPE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    val1 = fetch_data_byte(M.x86.R_SI);
-	    val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-		     cmp_byte(val1, val2);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_SI += inc;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF) == 0)
-		break;
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPE;
-    } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
-	/* REPNE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    val1 = fetch_data_byte(M.x86.R_SI);
-	    val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_byte(val1, val2);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_SI += inc;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF))
-		break;          /* zero flag set means equal */
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
-    } else {
-	val1 = fetch_data_byte(M.x86.R_SI);
-	val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-	cmp_byte(val1, val2);
-	M.x86.R_SI += inc;
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa7
-****************************************************************************/
-void x86emuOp_cmps_word(u8 X86EMU_UNUSED(op1))
-{
-    u32 val1,val2;
-    int inc;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("CMPS\tDWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -4;
-	else
-	    inc = 4;
-    } else {
-	DECODE_PRINTF("CMPS\tWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -2;
-	else
-	    inc = 2;
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_REPE) {
-	/* REPE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		val1 = fetch_data_long(M.x86.R_SI);
-		val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_long(val1, val2);
-	    } else {
-		val1 = fetch_data_word(M.x86.R_SI);
-		val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_word((u16)val1, (u16)val2);
-	    }
-	    M.x86.R_CX -= 1;
-	    M.x86.R_SI += inc;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF) == 0)
-		break;
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPE;
-    } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
-	/* REPNE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		val1 = fetch_data_long(M.x86.R_SI);
-		val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_long(val1, val2);
-	    } else {
-		val1 = fetch_data_word(M.x86.R_SI);
-		val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_word((u16)val1, (u16)val2);
-	    }
-	    M.x86.R_CX -= 1;
-	    M.x86.R_SI += inc;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF))
-		break;          /* zero flag set means equal */
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
-    } else {
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    val1 = fetch_data_long(M.x86.R_SI);
-	    val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_long(val1, val2);
-	} else {
-	    val1 = fetch_data_word(M.x86.R_SI);
-	    val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_word((u16)val1, (u16)val2);
-	}
-	M.x86.R_SI += inc;
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa8
-****************************************************************************/
-void x86emuOp_test_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("TEST\tAL,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%04x\n", imm);
-    TRACE_AND_STEP();
-	test_byte(M.x86.R_AL, (u8)imm);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa9
-****************************************************************************/
-void x86emuOp_test_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("TEST\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("TEST\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	test_long(M.x86.R_EAX, srcval);
-    } else {
-	test_word(M.x86.R_AX, (u16)srcval);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xaa
-****************************************************************************/
-void x86emuOp_stos_byte(u8 X86EMU_UNUSED(op1))
-{
-    int inc;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("STOS\tBYTE\n");
-    if (ACCESS_FLAG(F_DF))   /* down */
-	inc = -1;
-    else
-	inc = 1;
-    TRACE_AND_STEP();
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_DI += inc;
-	}
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    } else {
-	store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xab
-****************************************************************************/
-void x86emuOp_stos_word(u8 X86EMU_UNUSED(op1))
-{
-    int inc;
-    u32 count;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("STOS\tDWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -4;
-	else
-	    inc = 4;
-    } else {
-	DECODE_PRINTF("STOS\tWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -2;
-	else
-	    inc = 2;
-    }
-    TRACE_AND_STEP();
-    count = 1;
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	count = M.x86.R_CX;
-	M.x86.R_CX = 0;
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    }
-    while (count--) {
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    store_data_long_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_EAX);
-	} else {
-	    store_data_word_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AX);
-	}
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xac
-****************************************************************************/
-void x86emuOp_lods_byte(u8 X86EMU_UNUSED(op1))
-{
-    int inc;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LODS\tBYTE\n");
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_DF))   /* down */
-	inc = -1;
-    else
-	inc = 1;
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_SI += inc;
-	}
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    } else {
-	M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
-	M.x86.R_SI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xad
-****************************************************************************/
-void x86emuOp_lods_word(u8 X86EMU_UNUSED(op1))
-{
-    int inc;
-    u32 count;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("LODS\tDWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -4;
-	else
-	    inc = 4;
-    } else {
-	DECODE_PRINTF("LODS\tWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -2;
-	else
-	    inc = 2;
-    }
-    TRACE_AND_STEP();
-    count = 1;
-    if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* move them until CX is ZERO. */
-	count = M.x86.R_CX;
-	M.x86.R_CX = 0;
-	M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    }
-    while (count--) {
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    M.x86.R_EAX = fetch_data_long(M.x86.R_SI);
-	} else {
-	    M.x86.R_AX = fetch_data_word(M.x86.R_SI);
-	}
-	M.x86.R_SI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xae
-****************************************************************************/
-void x86emuOp_scas_byte(u8 X86EMU_UNUSED(op1))
-{
-    s8 val2;
-    int inc;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SCAS\tBYTE\n");
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_DF))   /* down */
-	inc = -1;
-    else
-	inc = 1;
-    if (M.x86.mode & SYSMODE_PREFIX_REPE) {
-	/* REPE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_byte(M.x86.R_AL, val2);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF) == 0)
-		break;
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPE;
-    } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
-	/* REPNE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_byte(M.x86.R_AL, val2);
-	    M.x86.R_CX -= 1;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF))
-		break;          /* zero flag set means equal */
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
-    } else {
-	val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
-	cmp_byte(M.x86.R_AL, val2);
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xaf
-****************************************************************************/
-void x86emuOp_scas_word(u8 X86EMU_UNUSED(op1))
-{
-    int inc;
-    u32 val;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("SCAS\tDWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -4;
-	else
-	    inc = 4;
-    } else {
-	DECODE_PRINTF("SCAS\tWORD\n");
-	if (ACCESS_FLAG(F_DF))   /* down */
-	    inc = -2;
-	else
-	    inc = 2;
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_REPE) {
-	/* REPE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_long(M.x86.R_EAX, val);
-	    } else {
-		val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_word(M.x86.R_AX, (u16)val);
-	    }
-	    M.x86.R_CX -= 1;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF) == 0)
-		break;
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPE;
-    } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
-	/* REPNE  */
-	/* move them until CX is ZERO. */
-	while (M.x86.R_CX != 0) {
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_long(M.x86.R_EAX, val);
-	    } else {
-		val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-		cmp_word(M.x86.R_AX, (u16)val);
-	    }
-	    M.x86.R_CX -= 1;
-	    M.x86.R_DI += inc;
-	    if (ACCESS_FLAG(F_ZF))
-		break;          /* zero flag set means equal */
-	}
-	M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
-    } else {
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_long(M.x86.R_EAX, val);
-	} else {
-	    val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
-	    cmp_word(M.x86.R_AX, (u16)val);
-	}
-	M.x86.R_DI += inc;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb0
-****************************************************************************/
-void x86emuOp_mov_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tAL,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_AL = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb1
-****************************************************************************/
-void x86emuOp_mov_byte_CL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tCL,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_CL = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb2
-****************************************************************************/
-void x86emuOp_mov_byte_DL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tDL,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_DL = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb3
-****************************************************************************/
-void x86emuOp_mov_byte_BL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tBL,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_BL = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb4
-****************************************************************************/
-void x86emuOp_mov_byte_AH_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tAH,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_AH = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb5
-****************************************************************************/
-void x86emuOp_mov_byte_CH_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tCH,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_CH = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb6
-****************************************************************************/
-void x86emuOp_mov_byte_DH_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tDH,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_DH = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb7
-****************************************************************************/
-void x86emuOp_mov_byte_BH_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\tBH,");
-    imm = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", imm);
-    TRACE_AND_STEP();
-    M.x86.R_BH = imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb8
-****************************************************************************/
-void x86emuOp_mov_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tEAX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tAX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = srcval;
-    } else {
-	M.x86.R_AX = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb9
-****************************************************************************/
-void x86emuOp_mov_word_CX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tECX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tCX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ECX = srcval;
-    } else {
-	M.x86.R_CX = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xba
-****************************************************************************/
-void x86emuOp_mov_word_DX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tEDX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tDX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDX = srcval;
-    } else {
-	M.x86.R_DX = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbb
-****************************************************************************/
-void x86emuOp_mov_word_BX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tEBX,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tBX,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBX = srcval;
-    } else {
-	M.x86.R_BX = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbc
-****************************************************************************/
-void x86emuOp_mov_word_SP_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tESP,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tSP,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESP = srcval;
-    } else {
-	M.x86.R_SP = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbd
-****************************************************************************/
-void x86emuOp_mov_word_BP_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tEBP,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tBP,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EBP = srcval;
-    } else {
-	M.x86.R_BP = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbe
-****************************************************************************/
-void x86emuOp_mov_word_SI_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tESI,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tSI,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_ESI = srcval;
-    } else {
-	M.x86.R_SI = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbf
-****************************************************************************/
-void x86emuOp_mov_word_DI_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u32 srcval;
-
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("MOV\tEDI,");
-	srcval = fetch_long_imm();
-    } else {
-	DECODE_PRINTF("MOV\tDI,");
-	srcval = fetch_word_imm();
-    }
-    DECODE_PRINTF2("%x\n", srcval);
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EDI = srcval;
-    } else {
-	M.x86.R_DI = (u16)srcval;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/* used by opcodes c0, d0, and d2. */
-static u8(*opcD0_byte_operation[])(u8 d, u8 s) =
-{
-    rol_byte,
-    ror_byte,
-    rcl_byte,
-    rcr_byte,
-    shl_byte,
-    shr_byte,
-    shl_byte,           /* sal_byte === shl_byte  by definition */
-    sar_byte,
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc0
-****************************************************************************/
-void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 destval;
-    u8 amt;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	amt = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", amt);
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	amt = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", amt);
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	amt = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", amt);
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	amt = fetch_byte_imm();
-	DECODE_PRINTF2(",%x\n", amt);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
-	*destreg = destval;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/* used by opcodes c1, d1, and d3. */
-static u16(*opcD1_word_operation[])(u16 s, u8 d) =
-{
-    rol_word,
-    ror_word,
-    rcl_word,
-    rcr_word,
-    shl_word,
-    shr_word,
-    shl_word,           /* sal_byte === shl_byte  by definition */
-    sar_word,
-};
-
-/* used by opcodes c1, d1, and d3. */
-static u32 (*opcD1_long_operation[])(u32 s, u8 d) =
-{
-    rol_long,
-    ror_long,
-    rcl_long,
-    rcr_long,
-    shl_long,
-    shr_long,
-    shl_long,           /* sal_byte === shl_byte  by definition */
-    sar_long,
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc1
-****************************************************************************/
-void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-    u8 amt;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    TRACE_AND_STEP();
-	    *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
-	} else {
-	    u16 *destreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    amt = fetch_byte_imm();
-	    DECODE_PRINTF2(",%x\n", amt);
-	    TRACE_AND_STEP();
-	    *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc2
-****************************************************************************/
-void x86emuOp_ret_near_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("RET\t");
-    imm = fetch_word_imm();
-    DECODE_PRINTF2("%x\n", imm);
-	RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
-	TRACE_AND_STEP();
-    M.x86.R_IP = pop_word();
-    M.x86.R_SP += imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc3
-****************************************************************************/
-void x86emuOp_ret_near(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("RET\n");
-	RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
-	TRACE_AND_STEP();
-    M.x86.R_IP = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc4
-****************************************************************************/
-void x86emuOp_les_R_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rh, rl;
-    u16 *dstreg;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LES\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_ES = fetch_data_word(srcoffset + 2);
-	break;
-    case 1:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_ES = fetch_data_word(srcoffset + 2);
-	break;
-    case 2:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_ES = fetch_data_word(srcoffset + 2);
-	break;
-    case 3:                     /* register to register */
-	/* UNDEFINED! */
-	TRACE_AND_STEP();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc5
-****************************************************************************/
-void x86emuOp_lds_R_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rh, rl;
-    u16 *dstreg;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LDS\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_DS = fetch_data_word(srcoffset + 2);
-	break;
-    case 1:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_DS = fetch_data_word(srcoffset + 2);
-	break;
-    case 2:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_DS = fetch_data_word(srcoffset + 2);
-	break;
-    case 3:                     /* register to register */
-	/* UNDEFINED! */
-	TRACE_AND_STEP();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc6
-****************************************************************************/
-void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    if (rh != 0) {
-	DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n");
-	HALT_SYS();
-    }
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%2x\n", imm);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, imm);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%2x\n", imm);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, imm);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%2x\n", imm);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, imm);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	imm = fetch_byte_imm();
-	DECODE_PRINTF2(",%2x\n", imm);
-	TRACE_AND_STEP();
-	*destreg = imm;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc7
-****************************************************************************/
-void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOV\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    if (rh != 0) {
-	DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
-	HALT_SYS();
-    }
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, imm);
-	} else {
-	    u16 imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, imm);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, imm);
-	} else {
-	    u16 imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, imm);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 imm;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_long(destoffset, imm);
-	} else {
-	    u16 imm;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    store_data_word(destoffset, imm);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 *destreg;
-			u32 imm;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    imm = fetch_long_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    *destreg = imm;
-	} else {
-			u16 *destreg;
-			u16 imm;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    imm = fetch_word_imm();
-	    DECODE_PRINTF2(",%x\n", imm);
-	    TRACE_AND_STEP();
-	    *destreg = imm;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc8
-****************************************************************************/
-void x86emuOp_enter(u8 X86EMU_UNUSED(op1))
-{
-    u16 local,frame_pointer;
-    u8  nesting;
-    int i;
-
-    START_OF_INSTR();
-    local = fetch_word_imm();
-    nesting = fetch_byte_imm();
-    DECODE_PRINTF2("ENTER %x\n", local);
-    DECODE_PRINTF2(",%x\n", nesting);
-    TRACE_AND_STEP();
-    push_word(M.x86.R_BP);
-    frame_pointer = M.x86.R_SP;
-    if (nesting > 0) {
-	for (i = 1; i < nesting; i++) {
-	    M.x86.R_BP -= 2;
-	    push_word(fetch_data_word_abs(M.x86.R_SS, M.x86.R_BP));
-	    }
-	push_word(frame_pointer);
-	}
-    M.x86.R_BP = frame_pointer;
-    M.x86.R_SP = (u16)(M.x86.R_SP - local);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc9
-****************************************************************************/
-void x86emuOp_leave(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("LEAVE\n");
-    TRACE_AND_STEP();
-    M.x86.R_SP = M.x86.R_BP;
-    M.x86.R_BP = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xca
-****************************************************************************/
-void x86emuOp_ret_far_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 imm;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("RETF\t");
-    imm = fetch_word_imm();
-    DECODE_PRINTF2("%x\n", imm);
-	RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
-	TRACE_AND_STEP();
-    M.x86.R_IP = pop_word();
-    M.x86.R_CS = pop_word();
-    M.x86.R_SP += imm;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcb
-****************************************************************************/
-void x86emuOp_ret_far(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("RETF\n");
-	RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
-	TRACE_AND_STEP();
-    M.x86.R_IP = pop_word();
-    M.x86.R_CS = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcc
-****************************************************************************/
-void x86emuOp_int3(u8 X86EMU_UNUSED(op1))
-{
-    u16 tmp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("INT 3\n");
-    tmp = (u16) mem_access_word(3 * 4 + 2);
-    /* access the segment register */
-    TRACE_AND_STEP();
-	if (_X86EMU_intrTab[3]) {
-		(*_X86EMU_intrTab[3])(3);
-    } else {
-	push_word((u16)M.x86.R_FLG);
-	CLEAR_FLAG(F_IF);
-	CLEAR_FLAG(F_TF);
-	push_word(M.x86.R_CS);
-	M.x86.R_CS = mem_access_word(3 * 4 + 2);
-	push_word(M.x86.R_IP);
-	M.x86.R_IP = mem_access_word(3 * 4);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcd
-****************************************************************************/
-void x86emuOp_int_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 tmp;
-    u8 intnum;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("INT\t");
-    intnum = fetch_byte_imm();
-    DECODE_PRINTF2("%x\n", intnum);
-    tmp = mem_access_word(intnum * 4 + 2);
-    TRACE_AND_STEP();
-	if (_X86EMU_intrTab[intnum]) {
-		(*_X86EMU_intrTab[intnum])(intnum);
-    } else {
-	push_word((u16)M.x86.R_FLG);
-	CLEAR_FLAG(F_IF);
-	CLEAR_FLAG(F_TF);
-	push_word(M.x86.R_CS);
-	M.x86.R_CS = mem_access_word(intnum * 4 + 2);
-	push_word(M.x86.R_IP);
-	M.x86.R_IP = mem_access_word(intnum * 4);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xce
-****************************************************************************/
-void x86emuOp_into(u8 X86EMU_UNUSED(op1))
-{
-    u16 tmp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("INTO\n");
-    TRACE_AND_STEP();
-    if (ACCESS_FLAG(F_OF)) {
-	tmp = mem_access_word(4 * 4 + 2);
-		if (_X86EMU_intrTab[4]) {
-			(*_X86EMU_intrTab[4])(4);
-	} else {
-	    push_word((u16)M.x86.R_FLG);
-	    CLEAR_FLAG(F_IF);
-	    CLEAR_FLAG(F_TF);
-	    push_word(M.x86.R_CS);
-	    M.x86.R_CS = mem_access_word(4 * 4 + 2);
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = mem_access_word(4 * 4);
-	}
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcf
-****************************************************************************/
-void x86emuOp_iret(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("IRET\n");
-
-    TRACE_AND_STEP();
-
-    M.x86.R_IP = pop_word();
-    M.x86.R_CS = pop_word();
-    M.x86.R_FLG = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd0
-****************************************************************************/
-void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 destval;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",1\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, 1);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",1\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, 1);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",1\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, 1);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",1\n");
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (*destreg, 1);
-	*destreg = destval;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd1
-****************************************************************************/
-void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, 1);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, 1);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, 1);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, 1);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, 1);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("BYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",1\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, 1);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 destval;
-			u32 *destreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",1\n");
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (*destreg, 1);
-	    *destreg = destval;
-	} else {
-			u16 destval;
-			u16 *destreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",1\n");
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (*destreg, 1);
-	    *destreg = destval;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd2
-****************************************************************************/
-void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 destval;
-    u8 amt;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    amt = M.x86.R_CL;
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF(",CL\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF(",CL\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF(",CL\n");
-	destval = fetch_data_byte(destoffset);
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (destval, amt);
-	store_data_byte(destoffset, destval);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF(",CL\n");
-	TRACE_AND_STEP();
-	destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
-	*destreg = destval;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd3
-****************************************************************************/
-void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-    u8 amt;
-
-    /*
-     * Yet another weirdo special case instruction format.  Part of
-     * the opcode held below in "RH".  Doubly nested case would
-     * result, except that the decoded instruction
-     */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("ROL\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("ROR\t");
-	    break;
-	case 2:
-	    DECODE_PRINTF("RCL\t");
-	    break;
-	case 3:
-	    DECODE_PRINTF("RCR\t");
-	    break;
-	case 4:
-	    DECODE_PRINTF("SHL\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("SHR\t");
-	    break;
-	case 6:
-	    DECODE_PRINTF("SAL\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("SAR\t");
-	    break;
-	}
-    }
-#endif
-    /* know operation, decode the mod byte to find the addressing
-       mode. */
-    amt = M.x86.R_CL;
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-
-	    DECODE_PRINTF("DWORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_long(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_long_operation[rh]) (destval, amt);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-
-	    DECODE_PRINTF("WORD PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",CL\n");
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    destval = (*opcD1_word_operation[rh]) (destval, amt);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
-	} else {
-	    u16 *destreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd4
-****************************************************************************/
-void x86emuOp_aam(u8 X86EMU_UNUSED(op1))
-{
-    u8 a;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AAM\n");
-    a = fetch_byte_imm();      /* this is a stupid encoding. */
-    if (a != 10) {
-	DECODE_PRINTF("ERROR DECODING AAM\n");
-	TRACE_REGS();
-	HALT_SYS();
-    }
-    TRACE_AND_STEP();
-    /* note the type change here --- returning AL and AH in AX. */
-    M.x86.R_AX = aam_word(M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd5
-****************************************************************************/
-void x86emuOp_aad(u8 X86EMU_UNUSED(op1))
-{
-    u8 a;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("AAD\n");
-    a = fetch_byte_imm();
-    TRACE_AND_STEP();
-    M.x86.R_AX = aad_word(M.x86.R_AX);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/* opcode 0xd6 ILLEGAL OPCODE */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd7
-****************************************************************************/
-void x86emuOp_xlat(u8 X86EMU_UNUSED(op1))
-{
-    u16 addr;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("XLAT\n");
-    TRACE_AND_STEP();
-	addr = (u16)(M.x86.R_BX + (u8)M.x86.R_AL);
-    M.x86.R_AL = fetch_data_byte(addr);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/* instuctions  D8 .. DF are in i87_ops.c */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe0
-****************************************************************************/
-void x86emuOp_loopne(u8 X86EMU_UNUSED(op1))
-{
-    s16 ip;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LOOPNE\t");
-    ip = (s8) fetch_byte_imm();
-    ip += (s16) M.x86.R_IP;
-    DECODE_PRINTF2("%04x\n", ip);
-    TRACE_AND_STEP();
-    M.x86.R_CX -= 1;
-    if (M.x86.R_CX != 0 && !ACCESS_FLAG(F_ZF))      /* CX != 0 and !ZF */
-	M.x86.R_IP = ip;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe1
-****************************************************************************/
-void x86emuOp_loope(u8 X86EMU_UNUSED(op1))
-{
-    s16 ip;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LOOPE\t");
-    ip = (s8) fetch_byte_imm();
-    ip += (s16) M.x86.R_IP;
-    DECODE_PRINTF2("%04x\n", ip);
-    TRACE_AND_STEP();
-    M.x86.R_CX -= 1;
-    if (M.x86.R_CX != 0 && ACCESS_FLAG(F_ZF))       /* CX != 0 and ZF */
-	M.x86.R_IP = ip;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe2
-****************************************************************************/
-void x86emuOp_loop(u8 X86EMU_UNUSED(op1))
-{
-    s16 ip;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LOOP\t");
-    ip = (s8) fetch_byte_imm();
-    ip += (s16) M.x86.R_IP;
-    DECODE_PRINTF2("%04x\n", ip);
-    TRACE_AND_STEP();
-    M.x86.R_CX -= 1;
-    if (M.x86.R_CX != 0)
-	M.x86.R_IP = ip;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe3
-****************************************************************************/
-void x86emuOp_jcxz(u8 X86EMU_UNUSED(op1))
-{
-    u16 target;
-    s8  offset;
-
-    /* jump to byte offset if overflow flag is set */
-    START_OF_INSTR();
-    DECODE_PRINTF("JCXZ\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    if (M.x86.R_CX == 0)
-	M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe4
-****************************************************************************/
-void x86emuOp_in_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 port;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("IN\t");
-	port = (u8) fetch_byte_imm();
-    DECODE_PRINTF2("%x,AL\n", port);
-    TRACE_AND_STEP();
-    M.x86.R_AL = (*sys_inb)(port);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe5
-****************************************************************************/
-void x86emuOp_in_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u8 port;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("IN\t");
-	port = (u8) fetch_byte_imm();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF2("EAX,%x\n", port);
-    } else {
-	DECODE_PRINTF2("AX,%x\n", port);
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = (*sys_inl)(port);
-    } else {
-	M.x86.R_AX = (*sys_inw)(port);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe6
-****************************************************************************/
-void x86emuOp_out_byte_IMM_AL(u8 X86EMU_UNUSED(op1))
-{
-    u8 port;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OUT\t");
-	port = (u8) fetch_byte_imm();
-    DECODE_PRINTF2("%x,AL\n", port);
-    TRACE_AND_STEP();
-    (*sys_outb)(port, M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe7
-****************************************************************************/
-void x86emuOp_out_word_IMM_AX(u8 X86EMU_UNUSED(op1))
-{
-    u8 port;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("OUT\t");
-	port = (u8) fetch_byte_imm();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF2("%x,EAX\n", port);
-    } else {
-	DECODE_PRINTF2("%x,AX\n", port);
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	(*sys_outl)(port, M.x86.R_EAX);
-    } else {
-	(*sys_outw)(port, M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe8
-****************************************************************************/
-void x86emuOp_call_near_IMM(u8 X86EMU_UNUSED(op1))
-{
-    s16 ip;
-
-    START_OF_INSTR();
-	DECODE_PRINTF("CALL\t");
-	ip = (s16) fetch_word_imm();
-	ip += (s16) M.x86.R_IP;    /* CHECK SIGN */
-	DECODE_PRINTF2("%04x\n", ip);
-	CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, M.x86.R_CS, ip, "");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_IP);
-    M.x86.R_IP = ip;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe9
-****************************************************************************/
-void x86emuOp_jump_near_IMM(u8 X86EMU_UNUSED(op1))
-{
-    int ip;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("JMP\t");
-    ip = (s16)fetch_word_imm();
-    ip += (s16)M.x86.R_IP;
-    DECODE_PRINTF2("%04x\n", ip);
-    TRACE_AND_STEP();
-    M.x86.R_IP = (u16)ip;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xea
-****************************************************************************/
-void x86emuOp_jump_far_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 cs, ip;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("JMP\tFAR ");
-    ip = fetch_word_imm();
-    cs = fetch_word_imm();
-    DECODE_PRINTF2("%04x:", cs);
-    DECODE_PRINTF2("%04x\n", ip);
-    TRACE_AND_STEP();
-    M.x86.R_IP = ip;
-    M.x86.R_CS = cs;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xeb
-****************************************************************************/
-void x86emuOp_jump_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
-    u16 target;
-    s8 offset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("JMP\t");
-    offset = (s8)fetch_byte_imm();
-    target = (u16)(M.x86.R_IP + offset);
-    DECODE_PRINTF2("%x\n", target);
-    TRACE_AND_STEP();
-    M.x86.R_IP = target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xec
-****************************************************************************/
-void x86emuOp_in_byte_AL_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("IN\tAL,DX\n");
-    TRACE_AND_STEP();
-    M.x86.R_AL = (*sys_inb)(M.x86.R_DX);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xed
-****************************************************************************/
-void x86emuOp_in_word_AX_DX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("IN\tEAX,DX\n");
-    } else {
-	DECODE_PRINTF("IN\tAX,DX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	M.x86.R_EAX = (*sys_inl)(M.x86.R_DX);
-    } else {
-	M.x86.R_AX = (*sys_inw)(M.x86.R_DX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xee
-****************************************************************************/
-void x86emuOp_out_byte_DX_AL(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("OUT\tDX,AL\n");
-    TRACE_AND_STEP();
-    (*sys_outb)(M.x86.R_DX, M.x86.R_AL);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xef
-****************************************************************************/
-void x86emuOp_out_word_DX_AX(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	DECODE_PRINTF("OUT\tDX,EAX\n");
-    } else {
-	DECODE_PRINTF("OUT\tDX,AX\n");
-    }
-    TRACE_AND_STEP();
-    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	(*sys_outl)(M.x86.R_DX, M.x86.R_EAX);
-    } else {
-	(*sys_outw)(M.x86.R_DX, M.x86.R_AX);
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf0
-****************************************************************************/
-void x86emuOp_lock(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("LOCK:\n");
-    TRACE_AND_STEP();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/*opcode 0xf1 ILLEGAL OPERATION */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf2
-****************************************************************************/
-void x86emuOp_repne(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("REPNE\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_PREFIX_REPNE;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf3
-****************************************************************************/
-void x86emuOp_repe(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("REPE\n");
-    TRACE_AND_STEP();
-    M.x86.mode |= SYSMODE_PREFIX_REPE;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf4
-****************************************************************************/
-void x86emuOp_halt(u8 X86EMU_UNUSED(op1))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("HALT\n");
-    TRACE_AND_STEP();
-    HALT_SYS();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf5
-****************************************************************************/
-void x86emuOp_cmc(u8 X86EMU_UNUSED(op1))
-{
-    /* complement the carry flag. */
-    START_OF_INSTR();
-    DECODE_PRINTF("CMC\n");
-    TRACE_AND_STEP();
-    TOGGLE_FLAG(F_CF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf6
-****************************************************************************/
-void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    u8 *destreg;
-    uint destoffset;
-    u8 destval, srcval;
-
-    /* long, drawn out code follows.  Double switch for a total
-       of 32 cases.  */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:                     /* mod=00 */
-	switch (rh) {
-	case 0:         /* test byte imm */
-	    DECODE_PRINTF("TEST\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    srcval = fetch_byte_imm();
-	    DECODE_PRINTF2("%02x\n", srcval);
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    test_byte(destval, srcval);
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    DECODE_PRINTF("NOT\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = not_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 3:
-	    DECODE_PRINTF("NEG\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = neg_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 4:
-	    DECODE_PRINTF("MUL\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    mul_byte(destval);
-	    break;
-	case 5:
-	    DECODE_PRINTF("IMUL\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    imul_byte(destval);
-	    break;
-	case 6:
-	    DECODE_PRINTF("DIV\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    div_byte(destval);
-	    break;
-	case 7:
-	    DECODE_PRINTF("IDIV\tBYTE PTR ");
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    idiv_byte(destval);
-	    break;
-	}
-	break;                  /* end mod==00 */
-    case 1:                     /* mod=01 */
-	switch (rh) {
-	case 0:         /* test byte imm */
-	    DECODE_PRINTF("TEST\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    srcval = fetch_byte_imm();
-	    DECODE_PRINTF2("%02x\n", srcval);
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    test_byte(destval, srcval);
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=01 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    DECODE_PRINTF("NOT\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = not_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 3:
-	    DECODE_PRINTF("NEG\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = neg_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 4:
-	    DECODE_PRINTF("MUL\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    mul_byte(destval);
-	    break;
-	case 5:
-	    DECODE_PRINTF("IMUL\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    imul_byte(destval);
-	    break;
-	case 6:
-	    DECODE_PRINTF("DIV\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    div_byte(destval);
-	    break;
-	case 7:
-	    DECODE_PRINTF("IDIV\tBYTE PTR ");
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    idiv_byte(destval);
-	    break;
-	}
-	break;                  /* end mod==01 */
-    case 2:                     /* mod=10 */
-	switch (rh) {
-	case 0:         /* test byte imm */
-	    DECODE_PRINTF("TEST\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    srcval = fetch_byte_imm();
-	    DECODE_PRINTF2("%02x\n", srcval);
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    test_byte(destval, srcval);
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=10 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    DECODE_PRINTF("NOT\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = not_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 3:
-	    DECODE_PRINTF("NEG\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = neg_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 4:
-	    DECODE_PRINTF("MUL\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    mul_byte(destval);
-	    break;
-	case 5:
-	    DECODE_PRINTF("IMUL\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    imul_byte(destval);
-	    break;
-	case 6:
-	    DECODE_PRINTF("DIV\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    div_byte(destval);
-	    break;
-	case 7:
-	    DECODE_PRINTF("IDIV\tBYTE PTR ");
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF("\n");
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    idiv_byte(destval);
-	    break;
-	}
-	break;                  /* end mod==10 */
-    case 3:                     /* mod=11 */
-	switch (rh) {
-	case 0:         /* test byte imm */
-	    DECODE_PRINTF("TEST\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    srcval = fetch_byte_imm();
-	    DECODE_PRINTF2("%02x\n", srcval);
-	    TRACE_AND_STEP();
-	    test_byte(*destreg, srcval);
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    DECODE_PRINTF("NOT\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = not_byte(*destreg);
-	    break;
-	case 3:
-	    DECODE_PRINTF("NEG\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = neg_byte(*destreg);
-	    break;
-	case 4:
-	    DECODE_PRINTF("MUL\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    mul_byte(*destreg);      /*!!!  */
-	    break;
-	case 5:
-	    DECODE_PRINTF("IMUL\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    imul_byte(*destreg);
-	    break;
-	case 6:
-	    DECODE_PRINTF("DIV\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    div_byte(*destreg);
-	    break;
-	case 7:
-	    DECODE_PRINTF("IDIV\t");
-	    destreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    idiv_byte(*destreg);
-	    break;
-	}
-	break;                  /* end mod==11 */
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf7
-****************************************************************************/
-void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    /* long, drawn out code follows.  Double switch for a total
-       of 32 cases.  */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:                     /* mod=00 */
-	switch (rh) {
-	case 0:         /* test word imm */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval,srcval;
-
-		DECODE_PRINTF("TEST\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_long_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		test_long(destval, srcval);
-	    } else {
-		u16 destval,srcval;
-
-		DECODE_PRINTF("TEST\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_word_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		test_word(destval, srcval);
-	    }
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NOT\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = not_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NOT\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = not_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 3:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NEG\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NEG\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 4:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("MUL\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		mul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("MUL\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		mul_word(destval);
-	    }
-	    break;
-	case 5:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IMUL\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		imul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IMUL\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		imul_word(destval);
-	    }
-	    break;
-	case 6:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("DIV\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		div_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("DIV\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		div_word(destval);
-	    }
-	    break;
-	case 7:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IDIV\tDWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		idiv_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IDIV\tWORD PTR ");
-		destoffset = decode_rm00_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		idiv_word(destval);
-	    }
-	    break;
-	}
-	break;                  /* end mod==00 */
-    case 1:                     /* mod=01 */
-	switch (rh) {
-	case 0:         /* test word imm */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval,srcval;
-
-		DECODE_PRINTF("TEST\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_long_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		test_long(destval, srcval);
-	    } else {
-		u16 destval,srcval;
-
-		DECODE_PRINTF("TEST\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_word_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		test_word(destval, srcval);
-	    }
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=01 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NOT\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = not_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NOT\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = not_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 3:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NEG\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NEG\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 4:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("MUL\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		mul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("MUL\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		mul_word(destval);
-	    }
-	    break;
-	case 5:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IMUL\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		imul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IMUL\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		imul_word(destval);
-	    }
-	    break;
-	case 6:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("DIV\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		div_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("DIV\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		div_word(destval);
-	    }
-	    break;
-	case 7:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IDIV\tDWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		idiv_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IDIV\tWORD PTR ");
-		destoffset = decode_rm01_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		idiv_word(destval);
-	    }
-	    break;
-	}
-	break;                  /* end mod==01 */
-    case 2:                     /* mod=10 */
-	switch (rh) {
-	case 0:         /* test word imm */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval,srcval;
-
-		DECODE_PRINTF("TEST\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_long_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		test_long(destval, srcval);
-	    } else {
-		u16 destval,srcval;
-
-		DECODE_PRINTF("TEST\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_word_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		test_word(destval, srcval);
-	    }
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=10 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NOT\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = not_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NOT\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = not_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 3:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("NEG\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("NEG\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = neg_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 4:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("MUL\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		mul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("MUL\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		mul_word(destval);
-	    }
-	    break;
-	case 5:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IMUL\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		imul_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IMUL\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		imul_word(destval);
-	    }
-	    break;
-	case 6:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("DIV\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		div_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("DIV\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		div_word(destval);
-	    }
-	    break;
-	case 7:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		DECODE_PRINTF("IDIV\tDWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		idiv_long(destval);
-	    } else {
-		u16 destval;
-
-		DECODE_PRINTF("IDIV\tWORD PTR ");
-		destoffset = decode_rm10_address(rl);
-		DECODE_PRINTF("\n");
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		idiv_word(destval);
-	    }
-	    break;
-	}
-	break;                  /* end mod==10 */
-    case 3:                     /* mod=11 */
-	switch (rh) {
-	case 0:         /* test word imm */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-		u32 srcval;
-
-		DECODE_PRINTF("TEST\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_long_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		TRACE_AND_STEP();
-		test_long(*destreg, srcval);
-	    } else {
-		u16 *destreg;
-		u16 srcval;
-
-		DECODE_PRINTF("TEST\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF(",");
-		srcval = fetch_word_imm();
-		DECODE_PRINTF2("%x\n", srcval);
-		TRACE_AND_STEP();
-		test_word(*destreg, srcval);
-	    }
-	    break;
-	case 1:
-	    DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
-	    HALT_SYS();
-	    break;
-	case 2:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("NOT\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = not_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("NOT\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = not_word(*destreg);
-	    }
-	    break;
-	case 3:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("NEG\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = neg_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("NEG\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = neg_word(*destreg);
-	    }
-	    break;
-	case 4:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("MUL\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		mul_long(*destreg);      /*!!!  */
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("MUL\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		mul_word(*destreg);      /*!!!  */
-	    }
-	    break;
-	case 5:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("IMUL\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		imul_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("IMUL\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		imul_word(*destreg);
-	    }
-	    break;
-	case 6:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("DIV\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		div_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("DIV\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		div_word(*destreg);
-	    }
-	    break;
-	case 7:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		DECODE_PRINTF("IDIV\t");
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		idiv_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		DECODE_PRINTF("IDIV\t");
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		idiv_word(*destreg);
-	    }
-	    break;
-	}
-	break;                  /* end mod==11 */
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf8
-****************************************************************************/
-void x86emuOp_clc(u8 X86EMU_UNUSED(op1))
-{
-    /* clear the carry flag. */
-    START_OF_INSTR();
-    DECODE_PRINTF("CLC\n");
-    TRACE_AND_STEP();
-    CLEAR_FLAG(F_CF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf9
-****************************************************************************/
-void x86emuOp_stc(u8 X86EMU_UNUSED(op1))
-{
-    /* set the carry flag. */
-    START_OF_INSTR();
-    DECODE_PRINTF("STC\n");
-    TRACE_AND_STEP();
-    SET_FLAG(F_CF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfa
-****************************************************************************/
-void x86emuOp_cli(u8 X86EMU_UNUSED(op1))
-{
-    /* clear interrupts. */
-    START_OF_INSTR();
-    DECODE_PRINTF("CLI\n");
-    TRACE_AND_STEP();
-    CLEAR_FLAG(F_IF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfb
-****************************************************************************/
-void x86emuOp_sti(u8 X86EMU_UNUSED(op1))
-{
-    /* enable  interrupts. */
-    START_OF_INSTR();
-    DECODE_PRINTF("STI\n");
-    TRACE_AND_STEP();
-    SET_FLAG(F_IF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfc
-****************************************************************************/
-void x86emuOp_cld(u8 X86EMU_UNUSED(op1))
-{
-    /* clear interrupts. */
-    START_OF_INSTR();
-    DECODE_PRINTF("CLD\n");
-    TRACE_AND_STEP();
-    CLEAR_FLAG(F_DF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfd
-****************************************************************************/
-void x86emuOp_std(u8 X86EMU_UNUSED(op1))
-{
-    /* clear interrupts. */
-    START_OF_INSTR();
-    DECODE_PRINTF("STD\n");
-    TRACE_AND_STEP();
-    SET_FLAG(F_DF);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfe
-****************************************************************************/
-void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rh, rl;
-    u8 destval;
-    uint destoffset;
-    u8 *destreg;
-
-    /* Yet another special case instruction. */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    DECODE_PRINTF("INC\t");
-	    break;
-	case 1:
-	    DECODE_PRINTF("DEC\t");
-	    break;
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-	case 6:
-	case 7:
-	    DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod);
-	    HALT_SYS();
-	    break;
-	}
-    }
-#endif
-    switch (mod) {
-    case 0:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:         /* inc word ptr ... */
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = inc_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 1:         /* dec word ptr ... */
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = dec_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	}
-	break;
-    case 1:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = inc_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 1:
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = dec_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	}
-	break;
-    case 2:
-	DECODE_PRINTF("BYTE PTR ");
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = inc_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	case 1:
-	    destval = fetch_data_byte(destoffset);
-	    TRACE_AND_STEP();
-	    destval = dec_byte(destval);
-	    store_data_byte(destoffset, destval);
-	    break;
-	}
-	break;
-    case 3:
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:
-	    TRACE_AND_STEP();
-	    *destreg = inc_byte(*destreg);
-	    break;
-	case 1:
-	    TRACE_AND_STEP();
-	    *destreg = dec_byte(*destreg);
-	    break;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xff
-****************************************************************************/
-void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1))
-{
-    int mod, rh, rl;
-    uint destoffset = 0;
-	u16 *destreg;
-	u16 destval,destval2;
-
-    /* Yet another special case instruction. */
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
-    if (DEBUG_DECODE()) {
-	/* XXX DECODE_PRINTF may be changed to something more
-	   general, so that it is important to leave the strings
-	   in the same format, even though the result is that the
-	   above test is done twice. */
-
-	switch (rh) {
-	case 0:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		DECODE_PRINTF("INC\tDWORD PTR ");
-	    } else {
-		DECODE_PRINTF("INC\tWORD PTR ");
-	    }
-	    break;
-	case 1:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		DECODE_PRINTF("DEC\tDWORD PTR ");
-	    } else {
-		DECODE_PRINTF("DEC\tWORD PTR ");
-	    }
-	    break;
-	case 2:
-	    DECODE_PRINTF("CALL\t ");
-	    break;
-	case 3:
-	    DECODE_PRINTF("CALL\tFAR ");
-	    break;
-	case 4:
-	    DECODE_PRINTF("JMP\t");
-	    break;
-	case 5:
-	    DECODE_PRINTF("JMP\tFAR ");
-	    break;
-	case 6:
-	    DECODE_PRINTF("PUSH\t");
-	    break;
-	case 7:
-	    DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t");
-	    HALT_SYS();
-	    break;
-	}
-    }
-#endif
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:         /* inc word ptr ... */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 1:         /* dec word ptr ... */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 2:         /* call word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 3:         /* call far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_CS);
-	    M.x86.R_CS = destval2;
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 4:         /* jmp word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    break;
-	case 5:         /* jmp far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    M.x86.R_CS = destval2;
-	    break;
-	case 6:         /*  push word ptr ... */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		push_long(destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		push_word(destval);
-	    }
-	    break;
-	}
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 1:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 2:         /* call word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 3:         /* call far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_CS);
-	    M.x86.R_CS = destval2;
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 4:         /* jmp word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    break;
-	case 5:         /* jmp far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    M.x86.R_CS = destval2;
-	    break;
-	case 6:         /*  push word ptr ... */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		push_long(destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		push_word(destval);
-	    }
-	    break;
-	}
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	switch (rh) {
-	case 0:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = inc_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 1:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_long(destval);
-		store_data_long(destoffset, destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		destval = dec_word(destval);
-		store_data_word(destoffset, destval);
-	    }
-	    break;
-	case 2:         /* call word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 3:         /* call far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_CS);
-	    M.x86.R_CS = destval2;
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = destval;
-	    break;
-	case 4:         /* jmp word ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    break;
-	case 5:         /* jmp far ptr ... */
-	    destval = fetch_data_word(destoffset);
-	    destval2 = fetch_data_word(destoffset + 2);
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = destval;
-	    M.x86.R_CS = destval2;
-	    break;
-	case 6:         /*  push word ptr ... */
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 destval;
-
-		destval = fetch_data_long(destoffset);
-		TRACE_AND_STEP();
-		push_long(destval);
-	    } else {
-		u16 destval;
-
-		destval = fetch_data_word(destoffset);
-		TRACE_AND_STEP();
-		push_word(destval);
-	    }
-	    break;
-	}
-	break;
-    case 3:
-	switch (rh) {
-	case 0:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = inc_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = inc_word(*destreg);
-	    }
-	    break;
-	case 1:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = dec_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		*destreg = dec_word(*destreg);
-	    }
-	    break;
-	case 2:         /* call word ptr ... */
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    push_word(M.x86.R_IP);
-	    M.x86.R_IP = *destreg;
-	    break;
-	case 3:         /* jmp far ptr ... */
-	    DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
-	    TRACE_AND_STEP();
-	    HALT_SYS();
-	    break;
-
-	case 4:         /* jmp  ... */
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    M.x86.R_IP = (u16) (*destreg);
-	    break;
-	case 5:         /* jmp far ptr ... */
-	    DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
-	    TRACE_AND_STEP();
-	    HALT_SYS();
-	    break;
-	case 6:
-	    if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-		u32 *destreg;
-
-		destreg = DECODE_RM_LONG_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		push_long(*destreg);
-	    } else {
-		u16 *destreg;
-
-		destreg = DECODE_RM_WORD_REGISTER(rl);
-		DECODE_PRINTF("\n");
-		TRACE_AND_STEP();
-		push_word(*destreg);
-	    }
-	    break;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/***************************************************************************
- * Single byte operation code table:
- **************************************************************************/
-void (*x86emu_optab[256])(u8) =
-{
-/*  0x00 */ x86emuOp_add_byte_RM_R,
-/*  0x01 */ x86emuOp_add_word_RM_R,
-/*  0x02 */ x86emuOp_add_byte_R_RM,
-/*  0x03 */ x86emuOp_add_word_R_RM,
-/*  0x04 */ x86emuOp_add_byte_AL_IMM,
-/*  0x05 */ x86emuOp_add_word_AX_IMM,
-/*  0x06 */ x86emuOp_push_ES,
-/*  0x07 */ x86emuOp_pop_ES,
-
-/*  0x08 */ x86emuOp_or_byte_RM_R,
-/*  0x09 */ x86emuOp_or_word_RM_R,
-/*  0x0a */ x86emuOp_or_byte_R_RM,
-/*  0x0b */ x86emuOp_or_word_R_RM,
-/*  0x0c */ x86emuOp_or_byte_AL_IMM,
-/*  0x0d */ x86emuOp_or_word_AX_IMM,
-/*  0x0e */ x86emuOp_push_CS,
-/*  0x0f */ x86emuOp_two_byte,
-
-/*  0x10 */ x86emuOp_adc_byte_RM_R,
-/*  0x11 */ x86emuOp_adc_word_RM_R,
-/*  0x12 */ x86emuOp_adc_byte_R_RM,
-/*  0x13 */ x86emuOp_adc_word_R_RM,
-/*  0x14 */ x86emuOp_adc_byte_AL_IMM,
-/*  0x15 */ x86emuOp_adc_word_AX_IMM,
-/*  0x16 */ x86emuOp_push_SS,
-/*  0x17 */ x86emuOp_pop_SS,
-
-/*  0x18 */ x86emuOp_sbb_byte_RM_R,
-/*  0x19 */ x86emuOp_sbb_word_RM_R,
-/*  0x1a */ x86emuOp_sbb_byte_R_RM,
-/*  0x1b */ x86emuOp_sbb_word_R_RM,
-/*  0x1c */ x86emuOp_sbb_byte_AL_IMM,
-/*  0x1d */ x86emuOp_sbb_word_AX_IMM,
-/*  0x1e */ x86emuOp_push_DS,
-/*  0x1f */ x86emuOp_pop_DS,
-
-/*  0x20 */ x86emuOp_and_byte_RM_R,
-/*  0x21 */ x86emuOp_and_word_RM_R,
-/*  0x22 */ x86emuOp_and_byte_R_RM,
-/*  0x23 */ x86emuOp_and_word_R_RM,
-/*  0x24 */ x86emuOp_and_byte_AL_IMM,
-/*  0x25 */ x86emuOp_and_word_AX_IMM,
-/*  0x26 */ x86emuOp_segovr_ES,
-/*  0x27 */ x86emuOp_daa,
-
-/*  0x28 */ x86emuOp_sub_byte_RM_R,
-/*  0x29 */ x86emuOp_sub_word_RM_R,
-/*  0x2a */ x86emuOp_sub_byte_R_RM,
-/*  0x2b */ x86emuOp_sub_word_R_RM,
-/*  0x2c */ x86emuOp_sub_byte_AL_IMM,
-/*  0x2d */ x86emuOp_sub_word_AX_IMM,
-/*  0x2e */ x86emuOp_segovr_CS,
-/*  0x2f */ x86emuOp_das,
-
-/*  0x30 */ x86emuOp_xor_byte_RM_R,
-/*  0x31 */ x86emuOp_xor_word_RM_R,
-/*  0x32 */ x86emuOp_xor_byte_R_RM,
-/*  0x33 */ x86emuOp_xor_word_R_RM,
-/*  0x34 */ x86emuOp_xor_byte_AL_IMM,
-/*  0x35 */ x86emuOp_xor_word_AX_IMM,
-/*  0x36 */ x86emuOp_segovr_SS,
-/*  0x37 */ x86emuOp_aaa,
-
-/*  0x38 */ x86emuOp_cmp_byte_RM_R,
-/*  0x39 */ x86emuOp_cmp_word_RM_R,
-/*  0x3a */ x86emuOp_cmp_byte_R_RM,
-/*  0x3b */ x86emuOp_cmp_word_R_RM,
-/*  0x3c */ x86emuOp_cmp_byte_AL_IMM,
-/*  0x3d */ x86emuOp_cmp_word_AX_IMM,
-/*  0x3e */ x86emuOp_segovr_DS,
-/*  0x3f */ x86emuOp_aas,
-
-/*  0x40 */ x86emuOp_inc_AX,
-/*  0x41 */ x86emuOp_inc_CX,
-/*  0x42 */ x86emuOp_inc_DX,
-/*  0x43 */ x86emuOp_inc_BX,
-/*  0x44 */ x86emuOp_inc_SP,
-/*  0x45 */ x86emuOp_inc_BP,
-/*  0x46 */ x86emuOp_inc_SI,
-/*  0x47 */ x86emuOp_inc_DI,
-
-/*  0x48 */ x86emuOp_dec_AX,
-/*  0x49 */ x86emuOp_dec_CX,
-/*  0x4a */ x86emuOp_dec_DX,
-/*  0x4b */ x86emuOp_dec_BX,
-/*  0x4c */ x86emuOp_dec_SP,
-/*  0x4d */ x86emuOp_dec_BP,
-/*  0x4e */ x86emuOp_dec_SI,
-/*  0x4f */ x86emuOp_dec_DI,
-
-/*  0x50 */ x86emuOp_push_AX,
-/*  0x51 */ x86emuOp_push_CX,
-/*  0x52 */ x86emuOp_push_DX,
-/*  0x53 */ x86emuOp_push_BX,
-/*  0x54 */ x86emuOp_push_SP,
-/*  0x55 */ x86emuOp_push_BP,
-/*  0x56 */ x86emuOp_push_SI,
-/*  0x57 */ x86emuOp_push_DI,
-
-/*  0x58 */ x86emuOp_pop_AX,
-/*  0x59 */ x86emuOp_pop_CX,
-/*  0x5a */ x86emuOp_pop_DX,
-/*  0x5b */ x86emuOp_pop_BX,
-/*  0x5c */ x86emuOp_pop_SP,
-/*  0x5d */ x86emuOp_pop_BP,
-/*  0x5e */ x86emuOp_pop_SI,
-/*  0x5f */ x86emuOp_pop_DI,
-
-/*  0x60 */ x86emuOp_push_all,
-/*  0x61 */ x86emuOp_pop_all,
-/*  0x62 */ x86emuOp_illegal_op,   /* bound */
-/*  0x63 */ x86emuOp_illegal_op,   /* arpl */
-/*  0x64 */ x86emuOp_segovr_FS,
-/*  0x65 */ x86emuOp_segovr_GS,
-/*  0x66 */ x86emuOp_prefix_data,
-/*  0x67 */ x86emuOp_prefix_addr,
-
-/*  0x68 */ x86emuOp_push_word_IMM,
-/*  0x69 */ x86emuOp_imul_word_IMM,
-/*  0x6a */ x86emuOp_push_byte_IMM,
-/*  0x6b */ x86emuOp_imul_byte_IMM,
-/*  0x6c */ x86emuOp_ins_byte,
-/*  0x6d */ x86emuOp_ins_word,
-/*  0x6e */ x86emuOp_outs_byte,
-/*  0x6f */ x86emuOp_outs_word,
-
-/*  0x70 */ x86emuOp_jump_near_O,
-/*  0x71 */ x86emuOp_jump_near_NO,
-/*  0x72 */ x86emuOp_jump_near_B,
-/*  0x73 */ x86emuOp_jump_near_NB,
-/*  0x74 */ x86emuOp_jump_near_Z,
-/*  0x75 */ x86emuOp_jump_near_NZ,
-/*  0x76 */ x86emuOp_jump_near_BE,
-/*  0x77 */ x86emuOp_jump_near_NBE,
-
-/*  0x78 */ x86emuOp_jump_near_S,
-/*  0x79 */ x86emuOp_jump_near_NS,
-/*  0x7a */ x86emuOp_jump_near_P,
-/*  0x7b */ x86emuOp_jump_near_NP,
-/*  0x7c */ x86emuOp_jump_near_L,
-/*  0x7d */ x86emuOp_jump_near_NL,
-/*  0x7e */ x86emuOp_jump_near_LE,
-/*  0x7f */ x86emuOp_jump_near_NLE,
-
-/*  0x80 */ x86emuOp_opc80_byte_RM_IMM,
-/*  0x81 */ x86emuOp_opc81_word_RM_IMM,
-/*  0x82 */ x86emuOp_opc82_byte_RM_IMM,
-/*  0x83 */ x86emuOp_opc83_word_RM_IMM,
-/*  0x84 */ x86emuOp_test_byte_RM_R,
-/*  0x85 */ x86emuOp_test_word_RM_R,
-/*  0x86 */ x86emuOp_xchg_byte_RM_R,
-/*  0x87 */ x86emuOp_xchg_word_RM_R,
-
-/*  0x88 */ x86emuOp_mov_byte_RM_R,
-/*  0x89 */ x86emuOp_mov_word_RM_R,
-/*  0x8a */ x86emuOp_mov_byte_R_RM,
-/*  0x8b */ x86emuOp_mov_word_R_RM,
-/*  0x8c */ x86emuOp_mov_word_RM_SR,
-/*  0x8d */ x86emuOp_lea_word_R_M,
-/*  0x8e */ x86emuOp_mov_word_SR_RM,
-/*  0x8f */ x86emuOp_pop_RM,
-
-/*  0x90 */ x86emuOp_nop,
-/*  0x91 */ x86emuOp_xchg_word_AX_CX,
-/*  0x92 */ x86emuOp_xchg_word_AX_DX,
-/*  0x93 */ x86emuOp_xchg_word_AX_BX,
-/*  0x94 */ x86emuOp_xchg_word_AX_SP,
-/*  0x95 */ x86emuOp_xchg_word_AX_BP,
-/*  0x96 */ x86emuOp_xchg_word_AX_SI,
-/*  0x97 */ x86emuOp_xchg_word_AX_DI,
-
-/*  0x98 */ x86emuOp_cbw,
-/*  0x99 */ x86emuOp_cwd,
-/*  0x9a */ x86emuOp_call_far_IMM,
-/*  0x9b */ x86emuOp_wait,
-/*  0x9c */ x86emuOp_pushf_word,
-/*  0x9d */ x86emuOp_popf_word,
-/*  0x9e */ x86emuOp_sahf,
-/*  0x9f */ x86emuOp_lahf,
-
-/*  0xa0 */ x86emuOp_mov_AL_M_IMM,
-/*  0xa1 */ x86emuOp_mov_AX_M_IMM,
-/*  0xa2 */ x86emuOp_mov_M_AL_IMM,
-/*  0xa3 */ x86emuOp_mov_M_AX_IMM,
-/*  0xa4 */ x86emuOp_movs_byte,
-/*  0xa5 */ x86emuOp_movs_word,
-/*  0xa6 */ x86emuOp_cmps_byte,
-/*  0xa7 */ x86emuOp_cmps_word,
-/*  0xa8 */ x86emuOp_test_AL_IMM,
-/*  0xa9 */ x86emuOp_test_AX_IMM,
-/*  0xaa */ x86emuOp_stos_byte,
-/*  0xab */ x86emuOp_stos_word,
-/*  0xac */ x86emuOp_lods_byte,
-/*  0xad */ x86emuOp_lods_word,
-/*  0xac */ x86emuOp_scas_byte,
-/*  0xad */ x86emuOp_scas_word,
-
-
-/*  0xb0 */ x86emuOp_mov_byte_AL_IMM,
-/*  0xb1 */ x86emuOp_mov_byte_CL_IMM,
-/*  0xb2 */ x86emuOp_mov_byte_DL_IMM,
-/*  0xb3 */ x86emuOp_mov_byte_BL_IMM,
-/*  0xb4 */ x86emuOp_mov_byte_AH_IMM,
-/*  0xb5 */ x86emuOp_mov_byte_CH_IMM,
-/*  0xb6 */ x86emuOp_mov_byte_DH_IMM,
-/*  0xb7 */ x86emuOp_mov_byte_BH_IMM,
-
-/*  0xb8 */ x86emuOp_mov_word_AX_IMM,
-/*  0xb9 */ x86emuOp_mov_word_CX_IMM,
-/*  0xba */ x86emuOp_mov_word_DX_IMM,
-/*  0xbb */ x86emuOp_mov_word_BX_IMM,
-/*  0xbc */ x86emuOp_mov_word_SP_IMM,
-/*  0xbd */ x86emuOp_mov_word_BP_IMM,
-/*  0xbe */ x86emuOp_mov_word_SI_IMM,
-/*  0xbf */ x86emuOp_mov_word_DI_IMM,
-
-/*  0xc0 */ x86emuOp_opcC0_byte_RM_MEM,
-/*  0xc1 */ x86emuOp_opcC1_word_RM_MEM,
-/*  0xc2 */ x86emuOp_ret_near_IMM,
-/*  0xc3 */ x86emuOp_ret_near,
-/*  0xc4 */ x86emuOp_les_R_IMM,
-/*  0xc5 */ x86emuOp_lds_R_IMM,
-/*  0xc6 */ x86emuOp_mov_byte_RM_IMM,
-/*  0xc7 */ x86emuOp_mov_word_RM_IMM,
-/*  0xc8 */ x86emuOp_enter,
-/*  0xc9 */ x86emuOp_leave,
-/*  0xca */ x86emuOp_ret_far_IMM,
-/*  0xcb */ x86emuOp_ret_far,
-/*  0xcc */ x86emuOp_int3,
-/*  0xcd */ x86emuOp_int_IMM,
-/*  0xce */ x86emuOp_into,
-/*  0xcf */ x86emuOp_iret,
-
-/*  0xd0 */ x86emuOp_opcD0_byte_RM_1,
-/*  0xd1 */ x86emuOp_opcD1_word_RM_1,
-/*  0xd2 */ x86emuOp_opcD2_byte_RM_CL,
-/*  0xd3 */ x86emuOp_opcD3_word_RM_CL,
-/*  0xd4 */ x86emuOp_aam,
-/*  0xd5 */ x86emuOp_aad,
-/*  0xd6 */ x86emuOp_illegal_op,   /* Undocumented SETALC instruction */
-/*  0xd7 */ x86emuOp_xlat,
-/*  0xd8 */ x86emuOp_esc_coprocess_d8,
-/*  0xd9 */ x86emuOp_esc_coprocess_d9,
-/*  0xda */ x86emuOp_esc_coprocess_da,
-/*  0xdb */ x86emuOp_esc_coprocess_db,
-/*  0xdc */ x86emuOp_esc_coprocess_dc,
-/*  0xdd */ x86emuOp_esc_coprocess_dd,
-/*  0xde */ x86emuOp_esc_coprocess_de,
-/*  0xdf */ x86emuOp_esc_coprocess_df,
-
-/*  0xe0 */ x86emuOp_loopne,
-/*  0xe1 */ x86emuOp_loope,
-/*  0xe2 */ x86emuOp_loop,
-/*  0xe3 */ x86emuOp_jcxz,
-/*  0xe4 */ x86emuOp_in_byte_AL_IMM,
-/*  0xe5 */ x86emuOp_in_word_AX_IMM,
-/*  0xe6 */ x86emuOp_out_byte_IMM_AL,
-/*  0xe7 */ x86emuOp_out_word_IMM_AX,
-
-/*  0xe8 */ x86emuOp_call_near_IMM,
-/*  0xe9 */ x86emuOp_jump_near_IMM,
-/*  0xea */ x86emuOp_jump_far_IMM,
-/*  0xeb */ x86emuOp_jump_byte_IMM,
-/*  0xec */ x86emuOp_in_byte_AL_DX,
-/*  0xed */ x86emuOp_in_word_AX_DX,
-/*  0xee */ x86emuOp_out_byte_DX_AL,
-/*  0xef */ x86emuOp_out_word_DX_AX,
-
-/*  0xf0 */ x86emuOp_lock,
-/*  0xf1 */ x86emuOp_illegal_op,
-/*  0xf2 */ x86emuOp_repne,
-/*  0xf3 */ x86emuOp_repe,
-/*  0xf4 */ x86emuOp_halt,
-/*  0xf5 */ x86emuOp_cmc,
-/*  0xf6 */ x86emuOp_opcF6_byte_RM,
-/*  0xf7 */ x86emuOp_opcF7_word_RM,
-
-/*  0xf8 */ x86emuOp_clc,
-/*  0xf9 */ x86emuOp_stc,
-/*  0xfa */ x86emuOp_cli,
-/*  0xfb */ x86emuOp_sti,
-/*  0xfc */ x86emuOp_cld,
-/*  0xfd */ x86emuOp_std,
-/*  0xfe */ x86emuOp_opcFE_byte_RM,
-/*  0xff */ x86emuOp_opcFF_word_RM,
-};
-
-void tables_relocate(unsigned int offset)
-{
-    int i;
-    for (i=0; i<8; i++)
-    {
-	opc80_byte_operation[i] -= offset;
-	opc81_word_operation[i] -= offset;
-	opc81_long_operation[i] -= offset;
-
-	opc82_byte_operation[i] -= offset;
-	opc83_word_operation[i] -= offset;
-	opc83_long_operation[i] -= offset;
-
-	opcD0_byte_operation[i] -= offset;
-	opcD1_word_operation[i] -= offset;
-	opcD1_long_operation[i] -= offset;
-    }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c b/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c
deleted file mode 100644
index d381307fae..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c
+++ /dev/null
@@ -1,2800 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file includes subroutines to implement the decoding
-*               and emulation of all the x86 extended two-byte processor
-*               instructions.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-op1 - Instruction op code
-
-REMARKS:
-Handles illegal opcodes.
-****************************************************************************/
-void x86emuOp2_illegal_op(
-	u8 op2)
-{
-	START_OF_INSTR();
-	DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
-	TRACE_REGS();
-	printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n",
-		M.x86.R_CS, M.x86.R_IP-2,op2);
-    HALT_SYS();
-    END_OF_INSTR();
-}
-
-#define xorl(a,b)   ((a) && !(b)) || (!(a) && (b))
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0x80-0x8F
-****************************************************************************/
-void x86emuOp2_long_jump(u8 op2)
-{
-    s32 target;
-    char *name = 0;
-    int cond = 0;
-
-    /* conditional jump to word offset. */
-    START_OF_INSTR();
-    switch (op2) {
-      case 0x80:
-	name = "JO\t";
-	cond =  ACCESS_FLAG(F_OF);
-	break;
-      case 0x81:
-	name = "JNO\t";
-	cond = !ACCESS_FLAG(F_OF);
-	break;
-      case 0x82:
-	name = "JB\t";
-	cond = ACCESS_FLAG(F_CF);
-	break;
-      case 0x83:
-	name = "JNB\t";
-	cond = !ACCESS_FLAG(F_CF);
-	break;
-      case 0x84:
-	name = "JZ\t";
-	cond = ACCESS_FLAG(F_ZF);
-	break;
-      case 0x85:
-	name = "JNZ\t";
-	cond = !ACCESS_FLAG(F_ZF);
-	break;
-      case 0x86:
-	name = "JBE\t";
-	cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
-	break;
-      case 0x87:
-	name = "JNBE\t";
-	cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
-	break;
-      case 0x88:
-	name = "JS\t";
-	cond = ACCESS_FLAG(F_SF);
-	break;
-      case 0x89:
-	name = "JNS\t";
-	cond = !ACCESS_FLAG(F_SF);
-	break;
-      case 0x8a:
-	name = "JP\t";
-	cond = ACCESS_FLAG(F_PF);
-	break;
-      case 0x8b:
-	name = "JNP\t";
-	cond = !ACCESS_FLAG(F_PF);
-	break;
-      case 0x8c:
-	name = "JL\t";
-	cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
-	break;
-      case 0x8d:
-	name = "JNL\t";
-	cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
-	break;
-      case 0x8e:
-	name = "JLE\t";
-	cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
-		ACCESS_FLAG(F_ZF));
-	break;
-      case 0x8f:
-	name = "JNLE\t";
-	cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
-		 ACCESS_FLAG(F_ZF));
-	break;
-    }
-    DECODE_PRINTF(name);
-    target = (s16) fetch_word_imm();
-    target += (s16) M.x86.R_IP;
-    DECODE_PRINTF2("%04x\n", target);
-    TRACE_AND_STEP();
-    if (cond)
-	M.x86.R_IP = (u16)target;
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0x90-0x9F
-****************************************************************************/
-void x86emuOp2_set_byte(u8 op2)
-{
-    int mod, rl, rh;
-    uint destoffset;
-    u8  *destreg;
-    char *name = 0;
-    int cond = 0;
-
-    START_OF_INSTR();
-    switch (op2) {
-      case 0x90:
-	name = "SETO\t";
-	cond =  ACCESS_FLAG(F_OF);
-	break;
-      case 0x91:
-	name = "SETNO\t";
-	cond = !ACCESS_FLAG(F_OF);
-	break;
-      case 0x92:
-	name = "SETB\t";
-	cond = ACCESS_FLAG(F_CF);
-	break;
-      case 0x93:
-	name = "SETNB\t";
-	cond = !ACCESS_FLAG(F_CF);
-	break;
-      case 0x94:
-	name = "SETZ\t";
-	cond = ACCESS_FLAG(F_ZF);
-	break;
-      case 0x95:
-	name = "SETNZ\t";
-	cond = !ACCESS_FLAG(F_ZF);
-	break;
-      case 0x96:
-	name = "SETBE\t";
-	cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
-	break;
-      case 0x97:
-	name = "SETNBE\t";
-	cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
-	break;
-      case 0x98:
-	name = "SETS\t";
-	cond = ACCESS_FLAG(F_SF);
-	break;
-      case 0x99:
-	name = "SETNS\t";
-	cond = !ACCESS_FLAG(F_SF);
-	break;
-      case 0x9a:
-	name = "SETP\t";
-	cond = ACCESS_FLAG(F_PF);
-	break;
-      case 0x9b:
-	name = "SETNP\t";
-	cond = !ACCESS_FLAG(F_PF);
-	break;
-      case 0x9c:
-	name = "SETL\t";
-	cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
-	break;
-      case 0x9d:
-	name = "SETNL\t";
-	cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
-	break;
-      case 0x9e:
-	name = "SETLE\t";
-	cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
-		ACCESS_FLAG(F_ZF));
-	break;
-      case 0x9f:
-	name = "SETNLE\t";
-	cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
-		 ACCESS_FLAG(F_ZF));
-	break;
-    }
-    DECODE_PRINTF(name);
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destoffset = decode_rm00_address(rl);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, cond ? 0x01 : 0x00);
-	break;
-    case 1:
-	destoffset = decode_rm01_address(rl);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, cond ? 0x01 : 0x00);
-	break;
-    case 2:
-	destoffset = decode_rm10_address(rl);
-	TRACE_AND_STEP();
-	store_data_byte(destoffset, cond ? 0x01 : 0x00);
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_BYTE_REGISTER(rl);
-	TRACE_AND_STEP();
-	*destreg = cond ? 0x01 : 0x00;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa0
-****************************************************************************/
-void x86emuOp2_push_FS(u8 X86EMU_UNUSED(op2))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tFS\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_FS);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa1
-****************************************************************************/
-void x86emuOp2_pop_FS(u8 X86EMU_UNUSED(op2))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\tFS\n");
-    TRACE_AND_STEP();
-    M.x86.R_FS = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa3
-****************************************************************************/
-void x86emuOp2_bt_R(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    int bit,disp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("BT\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	} else {
-	    u16 srcval;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	} else {
-	    u16 srcval;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	} else {
-	    u16 srcval;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-	    CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg,*shiftreg;
-
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
-	} else {
-	    u16 *srcreg,*shiftreg;
-
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa4
-****************************************************************************/
-void x86emuOp2_shld_IMM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint destoffset;
-	u8 shift;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SHLD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    *destreg = shld_long(*destreg,*shiftreg,shift);
-	} else {
-	    u16 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    *destreg = shld_word(*destreg,*shiftreg,shift);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa5
-****************************************************************************/
-void x86emuOp2_shld_CL(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SHLD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shld_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shld_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = shld_long(*destreg,*shiftreg,M.x86.R_CL);
-	} else {
-	    u16 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = shld_word(*destreg,*shiftreg,M.x86.R_CL);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa8
-****************************************************************************/
-void x86emuOp2_push_GS(u8 X86EMU_UNUSED(op2))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("PUSH\tGS\n");
-    TRACE_AND_STEP();
-    push_word(M.x86.R_GS);
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa9
-****************************************************************************/
-void x86emuOp2_pop_GS(u8 X86EMU_UNUSED(op2))
-{
-    START_OF_INSTR();
-    DECODE_PRINTF("POP\tGS\n");
-    TRACE_AND_STEP();
-    M.x86.R_GS = pop_word();
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xaa
-****************************************************************************/
-void x86emuOp2_bts_R(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    int bit,disp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("BTS\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval | mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_word(srcoffset+disp, srcval | mask);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval | mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_word(srcoffset+disp, srcval | mask);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval | mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-			srcoffset = decode_rm10_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			disp = (s16)*shiftreg >> 4;
-			srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, srcval | mask);
-		}
-		break;
-	case 3:                     /* register to register */
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 *srcreg,*shiftreg;
-			u32 mask;
-
-			srcreg = DECODE_RM_LONG_REGISTER(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_LONG_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0x1F;
-			mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-			*srcreg |= mask;
-		} else {
-			u16 *srcreg,*shiftreg;
-			u16 mask;
-
-			srcreg = DECODE_RM_WORD_REGISTER(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			mask = (u16)(0x1 << bit);
-	    CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-	    *srcreg |= mask;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xac
-****************************************************************************/
-void x86emuOp2_shrd_IMM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint destoffset;
-	u8 shift;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SHLD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,shift);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,shift);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    *destreg = shrd_long(*destreg,*shiftreg,shift);
-	} else {
-	    u16 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    DECODE_PRINTF2("%d\n", shift);
-	    TRACE_AND_STEP();
-	    *destreg = shrd_word(*destreg,*shiftreg,shift);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xad
-****************************************************************************/
-void x86emuOp2_shrd_CL(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint destoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("SHLD\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 destval;
-	    u32 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_long(destoffset);
-	    destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
-	    store_data_long(destoffset, destval);
-	} else {
-	    u16 destval;
-	    u16 *shiftreg;
-
-	    destoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    destval = fetch_data_word(destoffset);
-	    destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
-	    store_data_word(destoffset, destval);
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = shrd_long(*destreg,*shiftreg,M.x86.R_CL);
-	} else {
-	    u16 *destreg,*shiftreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",CL\n");
-	    TRACE_AND_STEP();
-	    *destreg = shrd_word(*destreg,*shiftreg,M.x86.R_CL);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xaf
-****************************************************************************/
-void x86emuOp2_imul_R_RM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("IMUL\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    TRACE_AND_STEP();
-	    res = (s16)*destreg * (s16)srcval;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    TRACE_AND_STEP();
-	    res = (s16)*destreg * (s16)srcval;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_long(srcoffset);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_word(srcoffset);
-	    TRACE_AND_STEP();
-	    res = (s16)*destreg * (s16)srcval;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg,*srcreg;
-	    u32 res_lo,res_hi;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    TRACE_AND_STEP();
-	    imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)*srcreg);
-	    if (res_hi != 0) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u32)res_lo;
-	} else {
-	    u16 *destreg,*srcreg;
-	    u32 res;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    res = (s16)*destreg * (s16)*srcreg;
-	    if (res > 0xFFFF) {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	    } else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	    }
-	    *destreg = (u16)res;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb2
-****************************************************************************/
-void x86emuOp2_lss_R_IMM(u8 X86EMU_UNUSED(op2))
-{
-	int mod, rh, rl;
-    u16 *dstreg;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LSS\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_SS = fetch_data_word(srcoffset + 2);
-	break;
-    case 1:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_SS = fetch_data_word(srcoffset + 2);
-	break;
-    case 2:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_SS = fetch_data_word(srcoffset + 2);
-	break;
-    case 3:                     /* register to register */
-	/* UNDEFINED! */
-	TRACE_AND_STEP();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb3
-****************************************************************************/
-void x86emuOp2_btr_R(u8 X86EMU_UNUSED(op2))
-{
-	int mod, rl, rh;
-	uint srcoffset;
-	int bit,disp;
-
-	START_OF_INSTR();
-	DECODE_PRINTF("BTR\t");
-	FETCH_DECODE_MODRM(mod, rh, rl);
-	switch (mod) {
-	case 0:
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 srcval,mask;
-			u32 *shiftreg;
-
-			srcoffset = decode_rm00_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_LONG_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0x1F;
-			disp = (s16)*shiftreg >> 5;
-			srcval = fetch_data_long(srcoffset+disp);
-			mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_long(srcoffset+disp, srcval & ~mask);
-		} else {
-			u16 srcval,mask;
-			u16 *shiftreg;
-
-			srcoffset = decode_rm00_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			disp = (s16)*shiftreg >> 4;
-			srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
-		}
-		break;
-	case 1:
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 srcval,mask;
-			u32 *shiftreg;
-
-			srcoffset = decode_rm01_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_LONG_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0x1F;
-			disp = (s16)*shiftreg >> 5;
-			srcval = fetch_data_long(srcoffset+disp);
-			mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_long(srcoffset+disp, srcval & ~mask);
-		} else {
-			u16 srcval,mask;
-			u16 *shiftreg;
-
-			srcoffset = decode_rm01_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			disp = (s16)*shiftreg >> 4;
-			srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
-		}
-		break;
-	case 2:
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 srcval,mask;
-			u32 *shiftreg;
-
-			srcoffset = decode_rm10_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_LONG_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0x1F;
-			disp = (s16)*shiftreg >> 5;
-			srcval = fetch_data_long(srcoffset+disp);
-			mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_long(srcoffset+disp, srcval & ~mask);
-		} else {
-			u16 srcval,mask;
-			u16 *shiftreg;
-
-			srcoffset = decode_rm10_address(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			disp = (s16)*shiftreg >> 4;
-			srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
-		}
-		break;
-	case 3:                     /* register to register */
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 *srcreg,*shiftreg;
-			u32 mask;
-
-			srcreg = DECODE_RM_LONG_REGISTER(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_LONG_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0x1F;
-			mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-			*srcreg &= ~mask;
-		} else {
-			u16 *srcreg,*shiftreg;
-			u16 mask;
-
-			srcreg = DECODE_RM_WORD_REGISTER(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-			*srcreg &= ~mask;
-		}
-		break;
-	}
-	DECODE_CLEAR_SEGOVR();
-	END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb4
-****************************************************************************/
-void x86emuOp2_lfs_R_IMM(u8 X86EMU_UNUSED(op2))
-{
-	int mod, rh, rl;
-    u16 *dstreg;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LFS\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_FS = fetch_data_word(srcoffset + 2);
-	break;
-    case 1:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_FS = fetch_data_word(srcoffset + 2);
-	break;
-    case 2:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_FS = fetch_data_word(srcoffset + 2);
-	break;
-    case 3:                     /* register to register */
-	/* UNDEFINED! */
-	TRACE_AND_STEP();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb5
-****************************************************************************/
-void x86emuOp2_lgs_R_IMM(u8 X86EMU_UNUSED(op2))
-{
-	int mod, rh, rl;
-    u16 *dstreg;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("LGS\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_GS = fetch_data_word(srcoffset + 2);
-	break;
-    case 1:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_GS = fetch_data_word(srcoffset + 2);
-	break;
-    case 2:
-	dstreg = DECODE_RM_WORD_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*dstreg = fetch_data_word(srcoffset);
-	M.x86.R_GS = fetch_data_word(srcoffset + 2);
-	break;
-    case 3:                     /* register to register */
-	/* UNDEFINED! */
-	TRACE_AND_STEP();
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb6
-****************************************************************************/
-void x86emuOp2_movzx_byte_R_RM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOVZX\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = fetch_data_byte(srcoffset);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u8  *srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	} else {
-	    u16 *destreg;
-	    u8  *srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = *srcreg;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb7
-****************************************************************************/
-void x86emuOp2_movzx_word_R_RM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    u32 *destreg;
-    u32 srcval;
-    u16 *srcreg;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOVZX\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 1:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 2:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = fetch_data_word(srcoffset);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_WORD_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = *srcreg;
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xba
-****************************************************************************/
-void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    int bit;
-
-    START_OF_INSTR();
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (rh) {
-    case 3:
-	DECODE_PRINTF("BT\t");
-	break;
-    case 4:
-	DECODE_PRINTF("BTS\t");
-	break;
-    case 5:
-	DECODE_PRINTF("BTR\t");
-	break;
-    case 6:
-	DECODE_PRINTF("BTC\t");
-	break;
-    default:
-	DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
-	TRACE_REGS();
-	printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n",
-		M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl);
-	HALT_SYS();
-    }
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0x1F;
-	    srcval = fetch_data_long(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_long(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_long(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_long(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	} else {
-	    u16 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0xF;
-	    srcval = fetch_data_word(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_word(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_word(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_word(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0x1F;
-	    srcval = fetch_data_long(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_long(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_long(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_long(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	} else {
-	    u16 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0xF;
-	    srcval = fetch_data_word(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_word(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_word(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_word(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0x1F;
-	    srcval = fetch_data_long(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_long(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_long(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_long(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	} else {
-	    u16 srcval, mask;
-	    u8 shift;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0xF;
-	    srcval = fetch_data_word(srcoffset);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		store_data_word(srcoffset, srcval | mask);
-		break;
-	    case 5:
-		store_data_word(srcoffset, srcval & ~mask);
-		break;
-	    case 6:
-		store_data_word(srcoffset, srcval ^ mask);
-		break;
-	    default:
-		break;
-	    }
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg;
-	    u32 mask;
-	    u8 shift;
-
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0x1F;
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		*srcreg |= mask;
-		break;
-	    case 5:
-		*srcreg &= ~mask;
-		break;
-	    case 6:
-		*srcreg ^= mask;
-		break;
-	    default:
-		break;
-	    }
-	} else {
-	    u16 *srcreg;
-	    u16 mask;
-	    u8 shift;
-
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shift = fetch_byte_imm();
-	    TRACE_AND_STEP();
-	    bit = shift & 0xF;
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-	    switch (rh) {
-	    case 4:
-		*srcreg |= mask;
-		break;
-	    case 5:
-		*srcreg &= ~mask;
-		break;
-	    case 6:
-		*srcreg ^= mask;
-		break;
-	    default:
-		break;
-	    }
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbb
-****************************************************************************/
-void x86emuOp2_btc_R(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    int bit,disp;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("BTC\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval ^ mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval ^ mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval,mask;
-	    u32 *shiftreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    disp = (s16)*shiftreg >> 5;
-	    srcval = fetch_data_long(srcoffset+disp);
-	    mask = (0x1 << bit);
-	    CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-	    store_data_long(srcoffset+disp, srcval ^ mask);
-	} else {
-	    u16 srcval,mask;
-	    u16 *shiftreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0xF;
-	    disp = (s16)*shiftreg >> 4;
-	    srcval = fetch_data_word(srcoffset+disp);
-			mask = (u16)(0x1 << bit);
-			CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
-			store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			u32 *srcreg,*shiftreg;
-	    u32 mask;
-
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    shiftreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    bit = *shiftreg & 0x1F;
-	    mask = (0x1 << bit);
-			CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-			*srcreg ^= mask;
-		} else {
-			u16 *srcreg,*shiftreg;
-			u16 mask;
-
-			srcreg = DECODE_RM_WORD_REGISTER(rl);
-			DECODE_PRINTF(",");
-			shiftreg = DECODE_RM_WORD_REGISTER(rh);
-			TRACE_AND_STEP();
-			bit = *shiftreg & 0xF;
-			mask = (u16)(0x1 << bit);
-	    CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
-	    *srcreg ^= mask;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbc
-****************************************************************************/
-void x86emuOp2_bsf(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("BSF\n");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch(mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 3:				/* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg, *dstreg;
-
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
-		if ((*srcreg >> *dstreg) & 1) break;
-	} else {
-	    u16 *srcreg, *dstreg;
-
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
-	    for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
-		if ((*srcreg >> *dstreg) & 1) break;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbd
-****************************************************************************/
-void x86emuOp2_bsr(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("BSF\n");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch(mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm00_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm01_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 srcval, *dstreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_long(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	} else {
-	    u16 srcval, *dstreg;
-
-	    srcoffset = decode_rm10_address(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    srcval = fetch_data_word(srcoffset);
-	    CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
-	    for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
-		if ((srcval >> *dstreg) & 1) break;
-	}
-	break;
-    case 3:				/* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *srcreg, *dstreg;
-
-	    srcreg = DECODE_RM_LONG_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_LONG_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
-	    for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
-		if ((*srcreg >> *dstreg) & 1) break;
-	} else {
-	    u16 *srcreg, *dstreg;
-
-	    srcreg = DECODE_RM_WORD_REGISTER(rl);
-	    DECODE_PRINTF(",");
-	    dstreg = DECODE_RM_WORD_REGISTER(rh);
-	    TRACE_AND_STEP();
-	    CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
-	    for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
-		if ((*srcreg >> *dstreg) & 1) break;
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbe
-****************************************************************************/
-void x86emuOp2_movsx_byte_R_RM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOVSX\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = (s32)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm00_address(rl);
-	    srcval = (s16)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 1:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = (s32)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm01_address(rl);
-	    srcval = (s16)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 2:
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u32 srcval;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = (s32)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	} else {
-	    u16 *destreg;
-	    u16 srcval;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcoffset = decode_rm10_address(rl);
-	    srcval = (s16)((s8)fetch_data_byte(srcoffset));
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = srcval;
-	}
-	break;
-    case 3:                     /* register to register */
-	if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-	    u32 *destreg;
-	    u8  *srcreg;
-
-	    destreg = DECODE_RM_LONG_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = (s32)((s8)*srcreg);
-	} else {
-	    u16 *destreg;
-	    u8  *srcreg;
-
-	    destreg = DECODE_RM_WORD_REGISTER(rh);
-	    DECODE_PRINTF(",");
-	    srcreg = DECODE_RM_BYTE_REGISTER(rl);
-	    DECODE_PRINTF("\n");
-	    TRACE_AND_STEP();
-	    *destreg = (s16)((s8)*srcreg);
-	}
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbf
-****************************************************************************/
-void x86emuOp2_movsx_word_R_RM(u8 X86EMU_UNUSED(op2))
-{
-    int mod, rl, rh;
-    uint srcoffset;
-    u32 *destreg;
-    u32 srcval;
-    u16 *srcreg;
-
-    START_OF_INSTR();
-    DECODE_PRINTF("MOVSX\t");
-    FETCH_DECODE_MODRM(mod, rh, rl);
-    switch (mod) {
-    case 0:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm00_address(rl);
-	srcval = (s32)((s16)fetch_data_word(srcoffset));
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 1:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm01_address(rl);
-	srcval = (s32)((s16)fetch_data_word(srcoffset));
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 2:
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcoffset = decode_rm10_address(rl);
-	srcval = (s32)((s16)fetch_data_word(srcoffset));
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = srcval;
-	break;
-    case 3:                     /* register to register */
-	destreg = DECODE_RM_LONG_REGISTER(rh);
-	DECODE_PRINTF(",");
-	srcreg = DECODE_RM_WORD_REGISTER(rl);
-	DECODE_PRINTF("\n");
-	TRACE_AND_STEP();
-	*destreg = (s32)((s16)*srcreg);
-	break;
-    }
-    DECODE_CLEAR_SEGOVR();
-    END_OF_INSTR();
-}
-
-/***************************************************************************
- * Double byte operation code table:
- **************************************************************************/
-void (*x86emu_optab2[256])(u8) =
-{
-/*  0x00 */ x86emuOp2_illegal_op,  /* Group F (ring 0 PM)      */
-/*  0x01 */ x86emuOp2_illegal_op,  /* Group G (ring 0 PM)      */
-/*  0x02 */ x86emuOp2_illegal_op,  /* lar (ring 0 PM)          */
-/*  0x03 */ x86emuOp2_illegal_op,  /* lsl (ring 0 PM)          */
-/*  0x04 */ x86emuOp2_illegal_op,
-/*  0x05 */ x86emuOp2_illegal_op,  /* loadall (undocumented)   */
-/*  0x06 */ x86emuOp2_illegal_op,  /* clts (ring 0 PM)         */
-/*  0x07 */ x86emuOp2_illegal_op,  /* loadall (undocumented)   */
-/*  0x08 */ x86emuOp2_illegal_op,  /* invd (ring 0 PM)         */
-/*  0x09 */ x86emuOp2_illegal_op,  /* wbinvd (ring 0 PM)       */
-/*  0x0a */ x86emuOp2_illegal_op,
-/*  0x0b */ x86emuOp2_illegal_op,
-/*  0x0c */ x86emuOp2_illegal_op,
-/*  0x0d */ x86emuOp2_illegal_op,
-/*  0x0e */ x86emuOp2_illegal_op,
-/*  0x0f */ x86emuOp2_illegal_op,
-
-/*  0x10 */ x86emuOp2_illegal_op,
-/*  0x11 */ x86emuOp2_illegal_op,
-/*  0x12 */ x86emuOp2_illegal_op,
-/*  0x13 */ x86emuOp2_illegal_op,
-/*  0x14 */ x86emuOp2_illegal_op,
-/*  0x15 */ x86emuOp2_illegal_op,
-/*  0x16 */ x86emuOp2_illegal_op,
-/*  0x17 */ x86emuOp2_illegal_op,
-/*  0x18 */ x86emuOp2_illegal_op,
-/*  0x19 */ x86emuOp2_illegal_op,
-/*  0x1a */ x86emuOp2_illegal_op,
-/*  0x1b */ x86emuOp2_illegal_op,
-/*  0x1c */ x86emuOp2_illegal_op,
-/*  0x1d */ x86emuOp2_illegal_op,
-/*  0x1e */ x86emuOp2_illegal_op,
-/*  0x1f */ x86emuOp2_illegal_op,
-
-/*  0x20 */ x86emuOp2_illegal_op,  /* mov reg32,creg (ring 0 PM) */
-/*  0x21 */ x86emuOp2_illegal_op,  /* mov reg32,dreg (ring 0 PM) */
-/*  0x22 */ x86emuOp2_illegal_op,  /* mov creg,reg32 (ring 0 PM) */
-/*  0x23 */ x86emuOp2_illegal_op,  /* mov dreg,reg32 (ring 0 PM) */
-/*  0x24 */ x86emuOp2_illegal_op,  /* mov reg32,treg (ring 0 PM) */
-/*  0x25 */ x86emuOp2_illegal_op,
-/*  0x26 */ x86emuOp2_illegal_op,  /* mov treg,reg32 (ring 0 PM) */
-/*  0x27 */ x86emuOp2_illegal_op,
-/*  0x28 */ x86emuOp2_illegal_op,
-/*  0x29 */ x86emuOp2_illegal_op,
-/*  0x2a */ x86emuOp2_illegal_op,
-/*  0x2b */ x86emuOp2_illegal_op,
-/*  0x2c */ x86emuOp2_illegal_op,
-/*  0x2d */ x86emuOp2_illegal_op,
-/*  0x2e */ x86emuOp2_illegal_op,
-/*  0x2f */ x86emuOp2_illegal_op,
-
-/*  0x30 */ x86emuOp2_illegal_op,
-/*  0x31 */ x86emuOp2_illegal_op,
-/*  0x32 */ x86emuOp2_illegal_op,
-/*  0x33 */ x86emuOp2_illegal_op,
-/*  0x34 */ x86emuOp2_illegal_op,
-/*  0x35 */ x86emuOp2_illegal_op,
-/*  0x36 */ x86emuOp2_illegal_op,
-/*  0x37 */ x86emuOp2_illegal_op,
-/*  0x38 */ x86emuOp2_illegal_op,
-/*  0x39 */ x86emuOp2_illegal_op,
-/*  0x3a */ x86emuOp2_illegal_op,
-/*  0x3b */ x86emuOp2_illegal_op,
-/*  0x3c */ x86emuOp2_illegal_op,
-/*  0x3d */ x86emuOp2_illegal_op,
-/*  0x3e */ x86emuOp2_illegal_op,
-/*  0x3f */ x86emuOp2_illegal_op,
-
-/*  0x40 */ x86emuOp2_illegal_op,
-/*  0x41 */ x86emuOp2_illegal_op,
-/*  0x42 */ x86emuOp2_illegal_op,
-/*  0x43 */ x86emuOp2_illegal_op,
-/*  0x44 */ x86emuOp2_illegal_op,
-/*  0x45 */ x86emuOp2_illegal_op,
-/*  0x46 */ x86emuOp2_illegal_op,
-/*  0x47 */ x86emuOp2_illegal_op,
-/*  0x48 */ x86emuOp2_illegal_op,
-/*  0x49 */ x86emuOp2_illegal_op,
-/*  0x4a */ x86emuOp2_illegal_op,
-/*  0x4b */ x86emuOp2_illegal_op,
-/*  0x4c */ x86emuOp2_illegal_op,
-/*  0x4d */ x86emuOp2_illegal_op,
-/*  0x4e */ x86emuOp2_illegal_op,
-/*  0x4f */ x86emuOp2_illegal_op,
-
-/*  0x50 */ x86emuOp2_illegal_op,
-/*  0x51 */ x86emuOp2_illegal_op,
-/*  0x52 */ x86emuOp2_illegal_op,
-/*  0x53 */ x86emuOp2_illegal_op,
-/*  0x54 */ x86emuOp2_illegal_op,
-/*  0x55 */ x86emuOp2_illegal_op,
-/*  0x56 */ x86emuOp2_illegal_op,
-/*  0x57 */ x86emuOp2_illegal_op,
-/*  0x58 */ x86emuOp2_illegal_op,
-/*  0x59 */ x86emuOp2_illegal_op,
-/*  0x5a */ x86emuOp2_illegal_op,
-/*  0x5b */ x86emuOp2_illegal_op,
-/*  0x5c */ x86emuOp2_illegal_op,
-/*  0x5d */ x86emuOp2_illegal_op,
-/*  0x5e */ x86emuOp2_illegal_op,
-/*  0x5f */ x86emuOp2_illegal_op,
-
-/*  0x60 */ x86emuOp2_illegal_op,
-/*  0x61 */ x86emuOp2_illegal_op,
-/*  0x62 */ x86emuOp2_illegal_op,
-/*  0x63 */ x86emuOp2_illegal_op,
-/*  0x64 */ x86emuOp2_illegal_op,
-/*  0x65 */ x86emuOp2_illegal_op,
-/*  0x66 */ x86emuOp2_illegal_op,
-/*  0x67 */ x86emuOp2_illegal_op,
-/*  0x68 */ x86emuOp2_illegal_op,
-/*  0x69 */ x86emuOp2_illegal_op,
-/*  0x6a */ x86emuOp2_illegal_op,
-/*  0x6b */ x86emuOp2_illegal_op,
-/*  0x6c */ x86emuOp2_illegal_op,
-/*  0x6d */ x86emuOp2_illegal_op,
-/*  0x6e */ x86emuOp2_illegal_op,
-/*  0x6f */ x86emuOp2_illegal_op,
-
-/*  0x70 */ x86emuOp2_illegal_op,
-/*  0x71 */ x86emuOp2_illegal_op,
-/*  0x72 */ x86emuOp2_illegal_op,
-/*  0x73 */ x86emuOp2_illegal_op,
-/*  0x74 */ x86emuOp2_illegal_op,
-/*  0x75 */ x86emuOp2_illegal_op,
-/*  0x76 */ x86emuOp2_illegal_op,
-/*  0x77 */ x86emuOp2_illegal_op,
-/*  0x78 */ x86emuOp2_illegal_op,
-/*  0x79 */ x86emuOp2_illegal_op,
-/*  0x7a */ x86emuOp2_illegal_op,
-/*  0x7b */ x86emuOp2_illegal_op,
-/*  0x7c */ x86emuOp2_illegal_op,
-/*  0x7d */ x86emuOp2_illegal_op,
-/*  0x7e */ x86emuOp2_illegal_op,
-/*  0x7f */ x86emuOp2_illegal_op,
-
-/*  0x80 */ x86emuOp2_long_jump,
-/*  0x81 */ x86emuOp2_long_jump,
-/*  0x82 */ x86emuOp2_long_jump,
-/*  0x83 */ x86emuOp2_long_jump,
-/*  0x84 */ x86emuOp2_long_jump,
-/*  0x85 */ x86emuOp2_long_jump,
-/*  0x86 */ x86emuOp2_long_jump,
-/*  0x87 */ x86emuOp2_long_jump,
-/*  0x88 */ x86emuOp2_long_jump,
-/*  0x89 */ x86emuOp2_long_jump,
-/*  0x8a */ x86emuOp2_long_jump,
-/*  0x8b */ x86emuOp2_long_jump,
-/*  0x8c */ x86emuOp2_long_jump,
-/*  0x8d */ x86emuOp2_long_jump,
-/*  0x8e */ x86emuOp2_long_jump,
-/*  0x8f */ x86emuOp2_long_jump,
-
-/*  0x90 */ x86emuOp2_set_byte,
-/*  0x91 */ x86emuOp2_set_byte,
-/*  0x92 */ x86emuOp2_set_byte,
-/*  0x93 */ x86emuOp2_set_byte,
-/*  0x94 */ x86emuOp2_set_byte,
-/*  0x95 */ x86emuOp2_set_byte,
-/*  0x96 */ x86emuOp2_set_byte,
-/*  0x97 */ x86emuOp2_set_byte,
-/*  0x98 */ x86emuOp2_set_byte,
-/*  0x99 */ x86emuOp2_set_byte,
-/*  0x9a */ x86emuOp2_set_byte,
-/*  0x9b */ x86emuOp2_set_byte,
-/*  0x9c */ x86emuOp2_set_byte,
-/*  0x9d */ x86emuOp2_set_byte,
-/*  0x9e */ x86emuOp2_set_byte,
-/*  0x9f */ x86emuOp2_set_byte,
-
-/*  0xa0 */ x86emuOp2_push_FS,
-/*  0xa1 */ x86emuOp2_pop_FS,
-/*  0xa2 */ x86emuOp2_illegal_op,
-/*  0xa3 */ x86emuOp2_bt_R,
-/*  0xa4 */ x86emuOp2_shld_IMM,
-/*  0xa5 */ x86emuOp2_shld_CL,
-/*  0xa6 */ x86emuOp2_illegal_op,
-/*  0xa7 */ x86emuOp2_illegal_op,
-/*  0xa8 */ x86emuOp2_push_GS,
-/*  0xa9 */ x86emuOp2_pop_GS,
-/*  0xaa */ x86emuOp2_illegal_op,
-/*  0xab */ x86emuOp2_bt_R,
-/*  0xac */ x86emuOp2_shrd_IMM,
-/*  0xad */ x86emuOp2_shrd_CL,
-/*  0xae */ x86emuOp2_illegal_op,
-/*  0xaf */ x86emuOp2_imul_R_RM,
-
-/*  0xb0 */ x86emuOp2_illegal_op,  /* TODO: cmpxchg */
-/*  0xb1 */ x86emuOp2_illegal_op,  /* TODO: cmpxchg */
-/*  0xb2 */ x86emuOp2_lss_R_IMM,
-/*  0xb3 */ x86emuOp2_btr_R,
-/*  0xb4 */ x86emuOp2_lfs_R_IMM,
-/*  0xb5 */ x86emuOp2_lgs_R_IMM,
-/*  0xb6 */ x86emuOp2_movzx_byte_R_RM,
-/*  0xb7 */ x86emuOp2_movzx_word_R_RM,
-/*  0xb8 */ x86emuOp2_illegal_op,
-/*  0xb9 */ x86emuOp2_illegal_op,
-/*  0xba */ x86emuOp2_btX_I,
-/*  0xbb */ x86emuOp2_btc_R,
-/*  0xbc */ x86emuOp2_bsf,
-/*  0xbd */ x86emuOp2_bsr,
-/*  0xbe */ x86emuOp2_movsx_byte_R_RM,
-/*  0xbf */ x86emuOp2_movsx_word_R_RM,
-
-/*  0xc0 */ x86emuOp2_illegal_op,  /* TODO: xadd */
-/*  0xc1 */ x86emuOp2_illegal_op,  /* TODO: xadd */
-/*  0xc2 */ x86emuOp2_illegal_op,
-/*  0xc3 */ x86emuOp2_illegal_op,
-/*  0xc4 */ x86emuOp2_illegal_op,
-/*  0xc5 */ x86emuOp2_illegal_op,
-/*  0xc6 */ x86emuOp2_illegal_op,
-/*  0xc7 */ x86emuOp2_illegal_op,
-/*  0xc8 */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xc9 */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xca */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xcb */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xcc */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xcd */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xce */ x86emuOp2_illegal_op,  /* TODO: bswap */
-/*  0xcf */ x86emuOp2_illegal_op,  /* TODO: bswap */
-
-/*  0xd0 */ x86emuOp2_illegal_op,
-/*  0xd1 */ x86emuOp2_illegal_op,
-/*  0xd2 */ x86emuOp2_illegal_op,
-/*  0xd3 */ x86emuOp2_illegal_op,
-/*  0xd4 */ x86emuOp2_illegal_op,
-/*  0xd5 */ x86emuOp2_illegal_op,
-/*  0xd6 */ x86emuOp2_illegal_op,
-/*  0xd7 */ x86emuOp2_illegal_op,
-/*  0xd8 */ x86emuOp2_illegal_op,
-/*  0xd9 */ x86emuOp2_illegal_op,
-/*  0xda */ x86emuOp2_illegal_op,
-/*  0xdb */ x86emuOp2_illegal_op,
-/*  0xdc */ x86emuOp2_illegal_op,
-/*  0xdd */ x86emuOp2_illegal_op,
-/*  0xde */ x86emuOp2_illegal_op,
-/*  0xdf */ x86emuOp2_illegal_op,
-
-/*  0xe0 */ x86emuOp2_illegal_op,
-/*  0xe1 */ x86emuOp2_illegal_op,
-/*  0xe2 */ x86emuOp2_illegal_op,
-/*  0xe3 */ x86emuOp2_illegal_op,
-/*  0xe4 */ x86emuOp2_illegal_op,
-/*  0xe5 */ x86emuOp2_illegal_op,
-/*  0xe6 */ x86emuOp2_illegal_op,
-/*  0xe7 */ x86emuOp2_illegal_op,
-/*  0xe8 */ x86emuOp2_illegal_op,
-/*  0xe9 */ x86emuOp2_illegal_op,
-/*  0xea */ x86emuOp2_illegal_op,
-/*  0xeb */ x86emuOp2_illegal_op,
-/*  0xec */ x86emuOp2_illegal_op,
-/*  0xed */ x86emuOp2_illegal_op,
-/*  0xee */ x86emuOp2_illegal_op,
-/*  0xef */ x86emuOp2_illegal_op,
-
-/*  0xf0 */ x86emuOp2_illegal_op,
-/*  0xf1 */ x86emuOp2_illegal_op,
-/*  0xf2 */ x86emuOp2_illegal_op,
-/*  0xf3 */ x86emuOp2_illegal_op,
-/*  0xf4 */ x86emuOp2_illegal_op,
-/*  0xf5 */ x86emuOp2_illegal_op,
-/*  0xf6 */ x86emuOp2_illegal_op,
-/*  0xf7 */ x86emuOp2_illegal_op,
-/*  0xf8 */ x86emuOp2_illegal_op,
-/*  0xf9 */ x86emuOp2_illegal_op,
-/*  0xfa */ x86emuOp2_illegal_op,
-/*  0xfb */ x86emuOp2_illegal_op,
-/*  0xfc */ x86emuOp2_illegal_op,
-/*  0xfd */ x86emuOp2_illegal_op,
-/*  0xfe */ x86emuOp2_illegal_op,
-/*  0xff */ x86emuOp2_illegal_op,
-};
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c b/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c
deleted file mode 100644
index 72b1bf2879..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c
+++ /dev/null
@@ -1,2914 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file contains the code to implement the primitive
-*				machine operations used by the emulation code in ops.c
-*
-* Carry Chain Calculation
-*
-* This represents a somewhat expensive calculation which is
-* apparently required to emulate the setting of the OF and AF flag.
-* The latter is not so important, but the former is.  The overflow
-* flag is the XOR of the top two bits of the carry chain for an
-* addition (similar for subtraction).  Since we do not want to
-* simulate the addition in a bitwise manner, we try to calculate the
-* carry chain given the two operands and the result.
-*
-* So, given the following table, which represents the addition of two
-* bits, we can derive a formula for the carry chain.
-*
-* a   b   cin   r     cout
-* 0   0   0     0     0
-* 0   0   1     1     0
-* 0   1   0     1     0
-* 0   1   1     0     1
-* 1   0   0     1     0
-* 1   0   1     0     1
-* 1   1   0     0     1
-* 1   1   1     1     1
-*
-* Construction of table for cout:
-*
-* ab
-* r  \  00   01   11  10
-* |------------------
-* 0  |   0    1    1   1
-* 1  |   0    0    1   0
-*
-* By inspection, one gets:  cc = ab +  r'(a + b)
-*
-* That represents alot of operations, but NO CHOICE....
-*
-* Borrow Chain Calculation.
-*
-* The following table represents the subtraction of two bits, from
-* which we can derive a formula for the borrow chain.
-*
-* a   b   bin   r     bout
-* 0   0   0     0     0
-* 0   0   1     1     1
-* 0   1   0     1     1
-* 0   1   1     0     1
-* 1   0   0     1     0
-* 1   0   1     0     0
-* 1   1   0     0     0
-* 1   1   1     1     1
-*
-* Construction of table for cout:
-*
-* ab
-* r  \  00   01   11  10
-* |------------------
-* 0  |   0    1    0   0
-* 1  |   1    1    1   0
-*
-* By inspection, one gets:  bc = a'b +  r(a' + b)
-*
-****************************************************************************/
-
-#define	PRIM_OPS_NO_REDEFINE_ASM
-#include "x86emu/x86emui.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-#ifndef	__HAVE_INLINE_ASSEMBLER__
-
-static u32 x86emu_parity_tab[8] =
-{
-	0x96696996,
-	0x69969669,
-	0x69969669,
-	0x96696996,
-	0x69969669,
-	0x96696996,
-	0x96696996,
-	0x69969669,
-};
-
-#endif
-
-#define PARITY(x)   (((x86emu_parity_tab[(x) / 32] >> ((x) % 32)) & 1) == 0)
-#define XOR2(x) 	(((x) ^ ((x)>>1)) & 0x1)
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifndef	__HAVE_INLINE_ASSEMBLER__
-
-/****************************************************************************
-REMARKS:
-Implements the AAA instruction and side effects.
-****************************************************************************/
-u16 aaa_word(u16 d)
-{
-	u16	res;
-	if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
-		d += 0x6;
-		d += 0x100;
-		SET_FLAG(F_AF);
-		SET_FLAG(F_CF);
-	} else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_AF);
-	}
-	res = (u16)(d & 0xFF0F);
-	CLEAR_FLAG(F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAA instruction and side effects.
-****************************************************************************/
-u16 aas_word(u16 d)
-{
-	u16	res;
-	if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
-		d -= 0x6;
-		d -= 0x100;
-		SET_FLAG(F_AF);
-		SET_FLAG(F_CF);
-	} else {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_AF);
-	}
-	res = (u16)(d & 0xFF0F);
-	CLEAR_FLAG(F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAD instruction and side effects.
-****************************************************************************/
-u16 aad_word(u16 d)
-{
-	u16 l;
-	u8 hb, lb;
-
-	hb = (u8)((d >> 8) & 0xff);
-	lb = (u8)((d & 0xff));
-	l = (u16)((lb + 10 * hb) & 0xFF);
-
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(l & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(l == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(l & 0xff), F_PF);
-	return l;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAM instruction and side effects.
-****************************************************************************/
-u16 aam_word(u8 d)
-{
-    u16 h, l;
-
-	h = (u16)(d / 10);
-	l = (u16)(d % 10);
-	l |= (u16)(h << 8);
-
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(l & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(l == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(l & 0xff), F_PF);
-    return l;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u8 adc_byte(u8 d, u8 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	if (ACCESS_FLAG(F_CF))
-		res = 1 + d + s;
-	else
-		res = d + s;
-
-	CONDITIONAL_SET_FLAG(res & 0x100, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u16 adc_word(u16 d, u16 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	if (ACCESS_FLAG(F_CF))
-		res = 1 + d + s;
-	else
-		res = d + s;
-
-	CONDITIONAL_SET_FLAG(res & 0x10000, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u32 adc_long(u32 d, u32 s)
-{
-	register u32 lo;	/* all operands in native machine order */
-	register u32 hi;
-	register u32 res;
-	register u32 cc;
-
-	if (ACCESS_FLAG(F_CF)) {
-		lo = 1 + (d & 0xFFFF) + (s & 0xFFFF);
-		res = 1 + d + s;
-		}
-	else {
-		lo = (d & 0xFFFF) + (s & 0xFFFF);
-		res = d + s;
-		}
-	hi = (lo >> 16) + (d >> 16) + (s >> 16);
-
-	CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u8 add_byte(u8 d, u8 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	res = d + s;
-	CONDITIONAL_SET_FLAG(res & 0x100, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u16 add_word(u16 d, u16 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	res = d + s;
-	CONDITIONAL_SET_FLAG(res & 0x10000, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u32 add_long(u32 d, u32 s)
-{
-	register u32 lo;	/* all operands in native machine order */
-	register u32 hi;
-	register u32 res;
-	register u32 cc;
-
-	lo = (d & 0xFFFF) + (s & 0xFFFF);
-	res = d + s;
-	hi = (lo >> 16) + (d >> 16) + (s >> 16);
-
-	CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-    /* calculate the carry chain  SEE NOTE AT TOP. */
-    cc = (s & d) | ((~res) & (s | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-
-    return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u8 and_byte(u8 d, u8 s)
-{
-	register u8 res;    /* all operands in native machine order */
-
-	res = d & s;
-
-	/* set the flags  */
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u16 and_word(u16 d, u16 s)
-{
-    register u16 res;   /* all operands in native machine order */
-
-    res = d & s;
-
-    /* set the flags  */
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-    return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u32 and_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-
-	res = d & s;
-
-	/* set the flags  */
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u8 cmp_byte(u8 d, u8 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	res = d - s;
-	CLEAR_FLAG(F_CF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u16 cmp_word(u16 d, u16 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-    bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u32 cmp_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DAA instruction and side effects.
-****************************************************************************/
-u8 daa_byte(u8 d)
-{
-	u32 res = d;
-	if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
-		res += 6;
-		SET_FLAG(F_AF);
-	}
-	if (res > 0x9F || ACCESS_FLAG(F_CF)) {
-		res += 0x60;
-		SET_FLAG(F_CF);
-	}
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xFF) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DAS instruction and side effects.
-****************************************************************************/
-u8 das_byte(u8 d)
-{
-	if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
-		d -= 6;
-		SET_FLAG(F_AF);
-	}
-	if (d > 0x9F || ACCESS_FLAG(F_CF)) {
-		d -= 0x60;
-		SET_FLAG(F_CF);
-	}
-	CONDITIONAL_SET_FLAG(d & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(d == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(d & 0xff), F_PF);
-	return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u8 dec_byte(u8 d)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-    res = d - 1;
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	/* based on sub_byte, uses s==1.  */
-	bc = (res & (~d | 1)) | (~d & 1);
-	/* carry flag unchanged */
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u16 dec_word(u16 d)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-    res = d - 1;
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-    /* calculate the borrow chain.  See note at top */
-    /* based on the sub_byte routine, with s==1 */
-    bc = (res & (~d | 1)) | (~d & 1);
-    /* carry flag unchanged */
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u32 dec_long(u32 d)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-    res = d - 1;
-
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-    /* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | 1)) | (~d & 1);
-	/* carry flag unchanged */
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u8 inc_byte(u8 d)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	res = d + 1;
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = ((1 & d) | (~res)) & (1 | d);
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u16 inc_word(u16 d)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	res = d + 1;
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (1 & d) | ((~res) & (1 | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u32 inc_long(u32 d)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 cc;
-
-	res = d + 1;
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the carry chain  SEE NOTE AT TOP. */
-	cc = (1 & d) | ((~res) & (1 | d));
-	CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u8 or_byte(u8 d, u8 s)
-{
-	register u8 res;    /* all operands in native machine order */
-
-	res = d | s;
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u16 or_word(u16 d, u16 s)
-{
-	register u16 res;   /* all operands in native machine order */
-
-	res = d | s;
-	/* set the carry flag to be bit 8 */
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u32 or_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-
-	res = d | s;
-
-	/* set the carry flag to be bit 8 */
-	CLEAR_FLAG(F_OF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u8 neg_byte(u8 s)
-{
-    register u8 res;
-    register u8 bc;
-
-	CONDITIONAL_SET_FLAG(s != 0, F_CF);
-	res = (u8)-s;
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
-	/* calculate the borrow chain --- modified such that d=0.
-	   substitutiing d=0 into     bc= res&(~d|s)|(~d&s);
-	   (the one used for sub) and simplifying, since ~d=0xff...,
-	   ~d|s == 0xffff..., and res&0xfff... == res.  Similarly
-	   ~d&s == s.  So the simplified result is: */
-	bc = res | s;
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u16 neg_word(u16 s)
-{
-	register u16 res;
-	register u16 bc;
-
-	CONDITIONAL_SET_FLAG(s != 0, F_CF);
-	res = (u16)-s;
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain --- modified such that d=0.
-	   substitutiing d=0 into     bc= res&(~d|s)|(~d&s);
-	   (the one used for sub) and simplifying, since ~d=0xff...,
-	   ~d|s == 0xffff..., and res&0xfff... == res.  Similarly
-	   ~d&s == s.  So the simplified result is: */
-	bc = res | s;
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u32 neg_long(u32 s)
-{
-	register u32 res;
-	register u32 bc;
-
-	CONDITIONAL_SET_FLAG(s != 0, F_CF);
-	res = (u32)-s;
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain --- modified such that d=0.
-	   substitutiing d=0 into     bc= res&(~d|s)|(~d&s);
-	   (the one used for sub) and simplifying, since ~d=0xff...,
-	   ~d|s == 0xffff..., and res&0xfff... == res.  Similarly
-	   ~d&s == s.  So the simplified result is: */
-	bc = res | s;
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u8 not_byte(u8 s)
-{
-	return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u16 not_word(u16 s)
-{
-	return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u32 not_long(u32 s)
-{
-	return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u8 rcl_byte(u8 d, u8 s)
-{
-    register unsigned int res, cnt, mask, cf;
-
-    /* s is the rotate distance.  It varies from 0 - 8. */
-	/* have
-
-       CF  B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
-
-       want to rotate through the carry by "s" bits.  We could
-       loop, but that's inefficient.  So the width is 9,
-       and we split into three parts:
-
-       The new carry flag   (was B_n)
-       the stuff in B_n-1 .. B_0
-       the stuff in B_7 .. B_n+1
-
-       The new rotate is done mod 9, and given this,
-       for a rotation of n bits (mod 9) the new carry flag is
-       then located n bits from the MSB.  The low part is
-       then shifted up cnt bits, and the high part is or'd
-       in.  Using CAPS for new values, and lowercase for the
-       original values, this can be expressed as:
-
-       IF n > 0
-       1) CF <-  b_(8-n)
-       2) B_(7) .. B_(n)  <-  b_(8-(n+1)) .. b_0
-       3) B_(n-1) <- cf
-       4) B_(n-2) .. B_0 <-  b_7 .. b_(8-(n-1))
-	 */
-	res = d;
-	if ((cnt = s % 9) != 0) {
-	/* extract the new CARRY FLAG. */
-	/* CF <-  b_(8-n)             */
-	cf = (d >> (8 - cnt)) & 0x1;
-
-	/* get the low stuff which rotated
-	   into the range B_7 .. B_cnt */
-	/* B_(7) .. B_(n)  <-  b_(8-(n+1)) .. b_0  */
-	/* note that the right hand side done by the mask */
-		res = (d << cnt) & 0xff;
-
-	/* now the high stuff which rotated around
-	   into the positions B_cnt-2 .. B_0 */
-	/* B_(n-2) .. B_0 <-  b_7 .. b_(8-(n-1)) */
-	/* shift it downward, 7-(n-2) = 9-n positions.
-	   and mask off the result before or'ing in.
-	 */
-	mask = (1 << (cnt - 1)) - 1;
-	res |= (d >> (9 - cnt)) & mask;
-
-	/* if the carry flag was set, or it in.  */
-		if (ACCESS_FLAG(F_CF)) {     /* carry flag is set */
-	    /*  B_(n-1) <- cf */
-	    res |= 1 << (cnt - 1);
-	}
-	/* set the new carry flag, based on the variable "cf" */
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-	/* OVERFLOW is set *IFF* cnt==1, then it is the
-	   xor of CF and the most significant bit.  Blecck. */
-	/* parenthesized this expression since it appears to
-	   be causing OF to be misset */
-	CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 6) & 0x2)),
-							 F_OF);
-
-    }
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u16 rcl_word(u16 d, u8 s)
-{
-	register unsigned int res, cnt, mask, cf;
-
-	res = d;
-	if ((cnt = s % 17) != 0) {
-		cf = (d >> (16 - cnt)) & 0x1;
-		res = (d << cnt) & 0xffff;
-		mask = (1 << (cnt - 1)) - 1;
-		res |= (d >> (17 - cnt)) & mask;
-		if (ACCESS_FLAG(F_CF)) {
-			res |= 1 << (cnt - 1);
-		}
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-		CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 14) & 0x2)),
-							 F_OF);
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u32 rcl_long(u32 d, u8 s)
-{
-	register u32 res, cnt, mask, cf;
-
-	res = d;
-	if ((cnt = s % 33) != 0) {
-		cf = (d >> (32 - cnt)) & 0x1;
-		res = (d << cnt) & 0xffffffff;
-		mask = (1 << (cnt - 1)) - 1;
-		res |= (d >> (33 - cnt)) & mask;
-		if (ACCESS_FLAG(F_CF)) {     /* carry flag is set */
-			res |= 1 << (cnt - 1);
-		}
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-		CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 30) & 0x2)),
-							 F_OF);
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u8 rcr_byte(u8 d, u8 s)
-{
-	u32	res, cnt;
-	u32	mask, cf, ocf = 0;
-
-	/* rotate right through carry */
-    /*
-       s is the rotate distance.  It varies from 0 - 8.
-       d is the byte object rotated.
-
-       have
-
-       CF  B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
-
-       The new rotate is done mod 9, and given this,
-       for a rotation of n bits (mod 9) the new carry flag is
-       then located n bits from the LSB.  The low part is
-       then shifted up cnt bits, and the high part is or'd
-       in.  Using CAPS for new values, and lowercase for the
-       original values, this can be expressed as:
-
-       IF n > 0
-       1) CF <-  b_(n-1)
-       2) B_(8-(n+1)) .. B_(0)  <-  b_(7) .. b_(n)
-       3) B_(8-n) <- cf
-       4) B_(7) .. B_(8-(n-1)) <-  b_(n-2) .. b_(0)
-	 */
-	res = d;
-	if ((cnt = s % 9) != 0) {
-	/* extract the new CARRY FLAG. */
-	/* CF <-  b_(n-1)              */
-	if (cnt == 1) {
-	    cf = d & 0x1;
-	    /* note hackery here.  Access_flag(..) evaluates to either
-	       0 if flag not set
-	       non-zero if flag is set.
-	       doing access_flag(..) != 0 casts that into either
-			   0..1 in any representation of the flags register
-	       (i.e. packed bit array or unpacked.)
-	     */
-			ocf = ACCESS_FLAG(F_CF) != 0;
-	} else
-	    cf = (d >> (cnt - 1)) & 0x1;
-
-	/* B_(8-(n+1)) .. B_(0)  <-  b_(7) .. b_n  */
-	/* note that the right hand side done by the mask
-	   This is effectively done by shifting the
-	   object to the right.  The result must be masked,
-	   in case the object came in and was treated
-	   as a negative number.  Needed??? */
-
-	mask = (1 << (8 - cnt)) - 1;
-	res = (d >> cnt) & mask;
-
-	/* now the high stuff which rotated around
-	   into the positions B_cnt-2 .. B_0 */
-	/* B_(7) .. B_(8-(n-1)) <-  b_(n-2) .. b_(0) */
-	/* shift it downward, 7-(n-2) = 9-n positions.
-	   and mask off the result before or'ing in.
-	 */
-	res |= (d << (9 - cnt));
-
-	/* if the carry flag was set, or it in.  */
-		if (ACCESS_FLAG(F_CF)) {     /* carry flag is set */
-	    /*  B_(8-n) <- cf */
-	    res |= 1 << (8 - cnt);
-	}
-	/* set the new carry flag, based on the variable "cf" */
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-	/* OVERFLOW is set *IFF* cnt==1, then it is the
-	   xor of CF and the most significant bit.  Blecck. */
-	/* parenthesized... */
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 6) & 0x2)),
-								 F_OF);
-		}
-	}
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u16 rcr_word(u16 d, u8 s)
-{
-	u32 res, cnt;
-	u32	mask, cf, ocf = 0;
-
-	/* rotate right through carry */
-	res = d;
-	if ((cnt = s % 17) != 0) {
-		if (cnt == 1) {
-			cf = d & 0x1;
-			ocf = ACCESS_FLAG(F_CF) != 0;
-		} else
-			cf = (d >> (cnt - 1)) & 0x1;
-		mask = (1 << (16 - cnt)) - 1;
-		res = (d >> cnt) & mask;
-		res |= (d << (17 - cnt));
-		if (ACCESS_FLAG(F_CF)) {
-			res |= 1 << (16 - cnt);
-		}
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 14) & 0x2)),
-								 F_OF);
-		}
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u32 rcr_long(u32 d, u8 s)
-{
-	u32 res, cnt;
-	u32 mask, cf, ocf = 0;
-
-	/* rotate right through carry */
-	res = d;
-	if ((cnt = s % 33) != 0) {
-		if (cnt == 1) {
-			cf = d & 0x1;
-			ocf = ACCESS_FLAG(F_CF) != 0;
-		} else
-			cf = (d >> (cnt - 1)) & 0x1;
-		mask = (1 << (32 - cnt)) - 1;
-		res = (d >> cnt) & mask;
-		if (cnt != 1)
-			res |= (d << (33 - cnt));
-		if (ACCESS_FLAG(F_CF)) {     /* carry flag is set */
-			res |= 1 << (32 - cnt);
-		}
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 30) & 0x2)),
-								 F_OF);
-		}
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u8 rol_byte(u8 d, u8 s)
-{
-    register unsigned int res, cnt, mask;
-
-    /* rotate left */
-    /*
-       s is the rotate distance.  It varies from 0 - 8.
-       d is the byte object rotated.
-
-       have
-
-       CF  B_7 ... B_0
-
-       The new rotate is done mod 8.
-       Much simpler than the "rcl" or "rcr" operations.
-
-       IF n > 0
-       1) B_(7) .. B_(n)  <-  b_(8-(n+1)) .. b_(0)
-       2) B_(n-1) .. B_(0) <-  b_(7) .. b_(8-n)
-	 */
-    res = d;
-	if ((cnt = s % 8) != 0) {
-		/* B_(7) .. B_(n)  <-  b_(8-(n+1)) .. b_(0) */
-		res = (d << cnt);
-
-		/* B_(n-1) .. B_(0) <-  b_(7) .. b_(8-n) */
-		mask = (1 << cnt) - 1;
-		res |= (d >> (8 - cnt)) & mask;
-
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-		/* OVERFLOW is set *IFF* s==1, then it is the
-		   xor of CF and the most significant bit.  Blecck. */
-		CONDITIONAL_SET_FLAG(s == 1 &&
-							 XOR2((res & 0x1) + ((res >> 6) & 0x2)),
-							 F_OF);
-	} if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-	}
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u16 rol_word(u16 d, u8 s)
-{
-    register unsigned int res, cnt, mask;
-
-	res = d;
-	if ((cnt = s % 16) != 0) {
-		res = (d << cnt);
-		mask = (1 << cnt) - 1;
-		res |= (d >> (16 - cnt)) & mask;
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-		CONDITIONAL_SET_FLAG(s == 1 &&
-							 XOR2((res & 0x1) + ((res >> 14) & 0x2)),
-							 F_OF);
-	} if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u32 rol_long(u32 d, u8 s)
-{
-    register u32 res, cnt, mask;
-
-	res = d;
-	if ((cnt = s % 32) != 0) {
-		res = (d << cnt);
-		mask = (1 << cnt) - 1;
-		res |= (d >> (32 - cnt)) & mask;
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-		CONDITIONAL_SET_FLAG(s == 1 &&
-							 XOR2((res & 0x1) + ((res >> 30) & 0x2)),
-							 F_OF);
-	} if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u8 ror_byte(u8 d, u8 s)
-{
-    register unsigned int res, cnt, mask;
-
-    /* rotate right */
-    /*
-       s is the rotate distance.  It varies from 0 - 8.
-       d is the byte object rotated.
-
-       have
-
-       B_7 ... B_0
-
-       The rotate is done mod 8.
-
-       IF n > 0
-       1) B_(8-(n+1)) .. B_(0)  <-  b_(7) .. b_(n)
-       2) B_(7) .. B_(8-n) <-  b_(n-1) .. b_(0)
-	 */
-	res = d;
-	if ((cnt = s % 8) != 0) {           /* not a typo, do nada if cnt==0 */
-	/* B_(7) .. B_(8-n) <-  b_(n-1) .. b_(0) */
-	res = (d << (8 - cnt));
-
-	/* B_(8-(n+1)) .. B_(0)  <-  b_(7) .. b_(n) */
-	mask = (1 << (8 - cnt)) - 1;
-	res |= (d >> (cnt)) & mask;
-
-	/* set the new carry flag, Note that it is the low order
-	   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
-		/* OVERFLOW is set *IFF* s==1, then it is the
-	   xor of the two most significant bits.  Blecck. */
-		CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 6), F_OF);
-	} else if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
-	}
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u16 ror_word(u16 d, u8 s)
-{
-    register unsigned int res, cnt, mask;
-
-	res = d;
-	if ((cnt = s % 16) != 0) {
-		res = (d << (16 - cnt));
-		mask = (1 << (16 - cnt)) - 1;
-		res |= (d >> (cnt)) & mask;
-		CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
-		CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 14), F_OF);
-	} else if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u32 ror_long(u32 d, u8 s)
-{
-	register u32 res, cnt, mask;
-
-	res = d;
-	if ((cnt = s % 32) != 0) {
-		res = (d << (32 - cnt));
-		mask = (1 << (32 - cnt)) - 1;
-		res |= (d >> (cnt)) & mask;
-		CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
-		CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 30), F_OF);
-	} else if (s != 0) {
-		/* set the new carry flag, Note that it is the low order
-		   bit of the result!!!                               */
-		CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u8 shl_byte(u8 d, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 8) {
-		cnt = s % 8;
-
-		/* last bit shifted out goes into carry flag */
-		if (cnt > 0) {
-			res = d << cnt;
-			cf = d & (1 << (8 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = (u8) d;
-		}
-
-		if (cnt == 1) {
-			/* Needs simplification. */
-			CONDITIONAL_SET_FLAG(
-									(((res & 0x80) == 0x80) ^
-									 (ACCESS_FLAG(F_CF) != 0)),
-			/* was (M.x86.R_FLG&F_CF)==F_CF)), */
-									F_OF);
-		} else {
-			CLEAR_FLAG(F_OF);
-		}
-	} else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-    }
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u16 shl_word(u16 d, u8 s)
-{
-    unsigned int cnt, res, cf;
-
-	if (s < 16) {
-		cnt = s % 16;
-		if (cnt > 0) {
-			res = d << cnt;
-			cf = d & (1 << (16 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = (u16) d;
-		}
-
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(
-									(((res & 0x8000) == 0x8000) ^
-									 (ACCESS_FLAG(F_CF) != 0)),
-									F_OF);
-	} else {
-			CLEAR_FLAG(F_OF);
-	}
-    } else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u32 shl_long(u32 d, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 32) {
-		cnt = s % 32;
-		if (cnt > 0) {
-			res = d << cnt;
-			cf = d & (1 << (32 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
-								  (ACCESS_FLAG(F_CF) != 0)), F_OF);
-		} else {
-			CLEAR_FLAG(F_OF);
-		}
-	} else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u8 shr_byte(u8 d, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 8) {
-		cnt = s % 8;
-		if (cnt > 0) {
-			cf = d & (1 << (cnt - 1));
-			res = d >> cnt;
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = (u8) d;
-		}
-
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(res >> 6), F_OF);
-		} else {
-			CLEAR_FLAG(F_OF);
-		}
-	} else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d >> (s-1)) & 0x1, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-	}
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u16 shr_word(u16 d, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 16) {
-		cnt = s % 16;
-		if (cnt > 0) {
-			cf = d & (1 << (cnt - 1));
-			res = d >> cnt;
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
-	} else {
-			CLEAR_FLAG(F_OF);
-	}
-	} else {
-		res = 0;
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-		SET_FLAG(F_ZF);
-		CLEAR_FLAG(F_SF);
-		CLEAR_FLAG(F_PF);
-    }
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u32 shr_long(u32 d, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 32) {
-		cnt = s % 32;
-		if (cnt > 0) {
-			cf = d & (1 << (cnt - 1));
-			res = d >> cnt;
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	} else {
-	    res = d;
-	}
-	if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
-	} else {
-			CLEAR_FLAG(F_OF);
-	}
-    } else {
-	res = 0;
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-		SET_FLAG(F_ZF);
-		CLEAR_FLAG(F_SF);
-		CLEAR_FLAG(F_PF);
-    }
-    return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u8 sar_byte(u8 d, u8 s)
-{
-	unsigned int cnt, res, cf, mask, sf;
-
-	res = d;
-	sf = d & 0x80;
-    cnt = s % 8;
-	if (cnt > 0 && cnt < 8) {
-		mask = (1 << (8 - cnt)) - 1;
-		cf = d & (1 << (cnt - 1));
-		res = (d >> cnt) & mask;
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-		if (sf) {
-			res |= ~mask;
-		}
-		CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-		CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-    } else if (cnt >= 8) {
-	if (sf) {
-	    res = 0xff;
-			SET_FLAG(F_CF);
-			CLEAR_FLAG(F_ZF);
-			SET_FLAG(F_SF);
-			SET_FLAG(F_PF);
-		} else {
-			res = 0;
-			CLEAR_FLAG(F_CF);
-			SET_FLAG(F_ZF);
-			CLEAR_FLAG(F_SF);
-			CLEAR_FLAG(F_PF);
-		}
-	}
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u16 sar_word(u16 d, u8 s)
-{
-    unsigned int cnt, res, cf, mask, sf;
-
-    sf = d & 0x8000;
-    cnt = s % 16;
-	res = d;
-	if (cnt > 0 && cnt < 16) {
-	mask = (1 << (16 - cnt)) - 1;
-	cf = d & (1 << (cnt - 1));
-	res = (d >> cnt) & mask;
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-	if (sf) {
-	    res |= ~mask;
-	}
-		CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-		CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-		CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-    } else if (cnt >= 16) {
-	if (sf) {
-	    res = 0xffff;
-			SET_FLAG(F_CF);
-			CLEAR_FLAG(F_ZF);
-			SET_FLAG(F_SF);
-			SET_FLAG(F_PF);
-	} else {
-	    res = 0;
-			CLEAR_FLAG(F_CF);
-			SET_FLAG(F_ZF);
-			CLEAR_FLAG(F_SF);
-			CLEAR_FLAG(F_PF);
-	}
-    }
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u32 sar_long(u32 d, u8 s)
-{
-    u32 cnt, res, cf, mask, sf;
-
-    sf = d & 0x80000000;
-    cnt = s % 32;
-	res = d;
-	if (cnt > 0 && cnt < 32) {
-	mask = (1 << (32 - cnt)) - 1;
-		cf = d & (1 << (cnt - 1));
-	res = (d >> cnt) & mask;
-		CONDITIONAL_SET_FLAG(cf, F_CF);
-	if (sf) {
-	    res |= ~mask;
-	}
-		CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-		CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-		CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-    } else if (cnt >= 32) {
-	if (sf) {
-	    res = 0xffffffff;
-			SET_FLAG(F_CF);
-			CLEAR_FLAG(F_ZF);
-			SET_FLAG(F_SF);
-			SET_FLAG(F_PF);
-		} else {
-			res = 0;
-			CLEAR_FLAG(F_CF);
-			SET_FLAG(F_ZF);
-			CLEAR_FLAG(F_SF);
-			CLEAR_FLAG(F_PF);
-		}
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHLD instruction and side effects.
-****************************************************************************/
-u16 shld_word (u16 d, u16 fill, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 16) {
-		cnt = s % 16;
-		if (cnt > 0) {
-			res = (d << cnt) | (fill >> (16-cnt));
-			cf = d & (1 << (16 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG((((res & 0x8000) == 0x8000) ^
-								  (ACCESS_FLAG(F_CF) != 0)), F_OF);
-		} else {
-			CLEAR_FLAG(F_OF);
-		}
-	} else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-	}
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHLD instruction and side effects.
-****************************************************************************/
-u32 shld_long (u32 d, u32 fill, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 32) {
-		cnt = s % 32;
-		if (cnt > 0) {
-			res = (d << cnt) | (fill >> (32-cnt));
-			cf = d & (1 << (32 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
-								  (ACCESS_FLAG(F_CF) != 0)), F_OF);
-		} else {
-			CLEAR_FLAG(F_OF);
-		}
-	} else {
-		res = 0;
-		CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
-		CLEAR_FLAG(F_OF);
-		CLEAR_FLAG(F_SF);
-		SET_FLAG(F_PF);
-		SET_FLAG(F_ZF);
-	}
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHRD instruction and side effects.
-****************************************************************************/
-u16 shrd_word (u16 d, u16 fill, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 16) {
-		cnt = s % 16;
-		if (cnt > 0) {
-			cf = d & (1 << (cnt - 1));
-			res = (d >> cnt) | (fill << (16 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
-	} else {
-			CLEAR_FLAG(F_OF);
-	}
-	} else {
-		res = 0;
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-		SET_FLAG(F_ZF);
-		CLEAR_FLAG(F_SF);
-		CLEAR_FLAG(F_PF);
-    }
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHRD instruction and side effects.
-****************************************************************************/
-u32 shrd_long (u32 d, u32 fill, u8 s)
-{
-	unsigned int cnt, res, cf;
-
-	if (s < 32) {
-		cnt = s % 32;
-		if (cnt > 0) {
-			cf = d & (1 << (cnt - 1));
-			res = (d >> cnt) | (fill << (32 - cnt));
-			CONDITIONAL_SET_FLAG(cf, F_CF);
-			CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-			CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-			CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-		} else {
-			res = d;
-		}
-		if (cnt == 1) {
-			CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
-	} else {
-			CLEAR_FLAG(F_OF);
-	}
-	} else {
-		res = 0;
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-		SET_FLAG(F_ZF);
-		CLEAR_FLAG(F_SF);
-		CLEAR_FLAG(F_PF);
-    }
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u8 sbb_byte(u8 d, u8 s)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-	if (ACCESS_FLAG(F_CF))
-		res = d - s - 1;
-	else
-		res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u16 sbb_word(u16 d, u16 s)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-	if (ACCESS_FLAG(F_CF))
-	res = d - s - 1;
-    else
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u32 sbb_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	if (ACCESS_FLAG(F_CF))
-	res = d - s - 1;
-    else
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u8 sub_byte(u8 d, u8 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u16 sub_word(u16 d, u16 s)
-{
-    register u32 res;   /* all operands in native machine order */
-    register u32 bc;
-
-    res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u32 sub_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-	register u32 bc;
-
-	res = d - s;
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
-	/* calculate the borrow chain.  See note at top */
-	bc = (res & (~d | s)) | (~d & s);
-	CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
-	CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
-	CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_byte(u8 d, u8 s)
-{
-    register u32 res;   /* all operands in native machine order */
-
-    res = d & s;
-
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-    /* AF == dont care */
-	CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_word(u16 d, u16 s)
-{
-	register u32 res;   /* all operands in native machine order */
-
-	res = d & s;
-
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	/* AF == dont care */
-	CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-
-	res = d & s;
-
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	/* AF == dont care */
-	CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u8 xor_byte(u8 d, u8 s)
-{
-	register u8 res;    /* all operands in native machine order */
-
-	res = d ^ s;
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u16 xor_word(u16 d, u16 s)
-{
-	register u16 res;   /* all operands in native machine order */
-
-	res = d ^ s;
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u32 xor_long(u32 d, u32 s)
-{
-	register u32 res;   /* all operands in native machine order */
-
-	res = d ^ s;
-	CLEAR_FLAG(F_OF);
-	CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
-	CONDITIONAL_SET_FLAG(res == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_byte(u8 s)
-{
-	s16 res = (s16)((s8)M.x86.R_AL * (s8)s);
-
-	M.x86.R_AX = res;
-	if (((M.x86.R_AL & 0x80) == 0 && M.x86.R_AH == 0x00) ||
-		((M.x86.R_AL & 0x80) != 0 && M.x86.R_AH == 0xFF)) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	} else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_word(u16 s)
-{
-	s32 res = (s16)M.x86.R_AX * (s16)s;
-
-	M.x86.R_AX = (u16)res;
-	M.x86.R_DX = (u16)(res >> 16);
-	if (((M.x86.R_AX & 0x8000) == 0 && M.x86.R_DX == 0x00) ||
-		((M.x86.R_AX & 0x8000) != 0 && M.x86.R_DX == 0xFF)) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	} else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s)
-{
-#ifdef	__HAS_LONG_LONG__
-	s64 res = (s32)d * (s32)s;
-
-	*res_lo = (u32)res;
-	*res_hi = (u32)(res >> 32);
-#else
-	u32	d_lo,d_hi,d_sign;
-	u32	s_lo,s_hi,s_sign;
-	u32	rlo_lo,rlo_hi,rhi_lo;
-
-	if ((d_sign = d & 0x80000000) != 0)
-		d = -d;
-	d_lo = d & 0xFFFF;
-	d_hi = d >> 16;
-	if ((s_sign = s & 0x80000000) != 0)
-		s = -s;
-	s_lo = s & 0xFFFF;
-	s_hi = s >> 16;
-	rlo_lo = d_lo * s_lo;
-	rlo_hi = (d_hi * s_lo + d_lo * s_hi) + (rlo_lo >> 16);
-	rhi_lo = d_hi * s_hi + (rlo_hi >> 16);
-	*res_lo = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
-	*res_hi = rhi_lo;
-	if (d_sign != s_sign) {
-		d = ~*res_lo;
-		s = (((d & 0xFFFF) + 1) >> 16) + (d >> 16);
-		*res_lo = ~*res_lo+1;
-		*res_hi = ~*res_hi+(s >> 16);
-		}
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_long(u32 s)
-{
-	imul_long_direct(&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s);
-	if (((M.x86.R_EAX & 0x80000000) == 0 && M.x86.R_EDX == 0x00) ||
-		((M.x86.R_EAX & 0x80000000) != 0 && M.x86.R_EDX == 0xFF)) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	} else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_byte(u8 s)
-{
-	u16 res = (u16)(M.x86.R_AL * s);
-
-	M.x86.R_AX = res;
-	if (M.x86.R_AH == 0) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	} else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-	}
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_word(u16 s)
-{
-	u32 res = M.x86.R_AX * s;
-
-	M.x86.R_AX = (u16)res;
-	M.x86.R_DX = (u16)(res >> 16);
-	if (M.x86.R_DX == 0) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-    } else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-    }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_long(u32 s)
-{
-#ifdef	__HAS_LONG_LONG__
-	u64 res = (u32)M.x86.R_EAX * (u32)s;
-
-	M.x86.R_EAX = (u32)res;
-	M.x86.R_EDX = (u32)(res >> 32);
-#else
-	u32	a,a_lo,a_hi;
-	u32	s_lo,s_hi;
-	u32	rlo_lo,rlo_hi,rhi_lo;
-
-	a = M.x86.R_EAX;
-	a_lo = a & 0xFFFF;
-	a_hi = a >> 16;
-	s_lo = s & 0xFFFF;
-	s_hi = s >> 16;
-	rlo_lo = a_lo * s_lo;
-	rlo_hi = (a_hi * s_lo + a_lo * s_hi) + (rlo_lo >> 16);
-	rhi_lo = a_hi * s_hi + (rlo_hi >> 16);
-	M.x86.R_EAX = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
-	M.x86.R_EDX = rhi_lo;
-#endif
-
-	if (M.x86.R_EDX == 0) {
-		CLEAR_FLAG(F_CF);
-		CLEAR_FLAG(F_OF);
-	} else {
-		SET_FLAG(F_CF);
-		SET_FLAG(F_OF);
-    }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_byte(u8 s)
-{
-    s32 dvd, div, mod;
-
-	dvd = (s16)M.x86.R_AX;
-	if (s == 0) {
-		x86emu_intr_raise(0);
-	return;
-	}
-	div = dvd / (s8)s;
-	mod = dvd % (s8)s;
-	if (abs(div) > 0x7f) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	M.x86.R_AL = (s8) div;
-	M.x86.R_AH = (s8) mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_word(u16 s)
-{
-	s32 dvd, div, mod;
-
-	dvd = (((s32)M.x86.R_DX) << 16) | M.x86.R_AX;
-	if (s == 0) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	div = dvd / (s16)s;
-	mod = dvd % (s16)s;
-	if (abs(div) > 0x7fff) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_SF);
-	CONDITIONAL_SET_FLAG(div == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
-	M.x86.R_AX = (u16)div;
-	M.x86.R_DX = (u16)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_long(u32 s)
-{
-#ifdef	__HAS_LONG_LONG__
-	s64 dvd, div, mod;
-
-	dvd = (((s64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
-	if (s == 0) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	div = dvd / (s32)s;
-	mod = dvd % (s32)s;
-	if (abs(div) > 0x7fffffff) {
-		x86emu_intr_raise(0);
-		return;
-	}
-#else
-	s32 div = 0, mod;
-	s32 h_dvd = M.x86.R_EDX;
-	u32 l_dvd = M.x86.R_EAX;
-	u32 abs_s = s & 0x7FFFFFFF;
-	u32 abs_h_dvd = h_dvd & 0x7FFFFFFF;
-	u32 h_s = abs_s >> 1;
-	u32 l_s = abs_s << 31;
-	int counter = 31;
-	int carry;
-
-	if (s == 0) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	do {
-		div <<= 1;
-		carry = (l_dvd >= l_s) ? 0 : 1;
-
-		if (abs_h_dvd < (h_s + carry)) {
-			h_s >>= 1;
-			l_s = abs_s << (--counter);
-			continue;
-		} else {
-			abs_h_dvd -= (h_s + carry);
-			l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
-				: (l_dvd - l_s);
-			h_s >>= 1;
-			l_s = abs_s << (--counter);
-			div |= 1;
-			continue;
-		}
-
-	} while (counter > -1);
-	/* overflow */
-	if (abs_h_dvd || (l_dvd > abs_s)) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	/* sign */
-	div |= ((h_dvd & 0x10000000) ^ (s & 0x10000000));
-	mod = l_dvd;
-
-#endif
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CLEAR_FLAG(F_SF);
-	SET_FLAG(F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
-	M.x86.R_EAX = (u32)div;
-	M.x86.R_EDX = (u32)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_byte(u8 s)
-{
-	u32 dvd, div, mod;
-
-	dvd = M.x86.R_AX;
-    if (s == 0) {
-		x86emu_intr_raise(0);
-	return;
-    }
-	div = dvd / (u8)s;
-	mod = dvd % (u8)s;
-	if (abs(div) > 0xff) {
-		x86emu_intr_raise(0);
-	return;
-	}
-	M.x86.R_AL = (u8)div;
-	M.x86.R_AH = (u8)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_word(u16 s)
-{
-	u32 dvd, div, mod;
-
-	dvd = (((u32)M.x86.R_DX) << 16) | M.x86.R_AX;
-	if (s == 0) {
-		x86emu_intr_raise(0);
-	return;
-    }
-	div = dvd / (u16)s;
-	mod = dvd % (u16)s;
-	if (abs(div) > 0xffff) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_SF);
-	CONDITIONAL_SET_FLAG(div == 0, F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
-	M.x86.R_AX = (u16)div;
-	M.x86.R_DX = (u16)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_long(u32 s)
-{
-#ifdef	__HAS_LONG_LONG__
-	u64 dvd, div, mod;
-
-	dvd = (((u64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
-	if (s == 0) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	div = dvd / (u32)s;
-	mod = dvd % (u32)s;
-	if (abs(div) > 0xffffffff) {
-		x86emu_intr_raise(0);
-		return;
-	}
-#else
-	s32 div = 0, mod;
-	s32 h_dvd = M.x86.R_EDX;
-	u32 l_dvd = M.x86.R_EAX;
-
-	u32 h_s = s;
-	u32 l_s = 0;
-	int counter = 32;
-	int carry;
-
-	if (s == 0) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	do {
-		div <<= 1;
-		carry = (l_dvd >= l_s) ? 0 : 1;
-
-		if (h_dvd < (h_s + carry)) {
-			h_s >>= 1;
-			l_s = s << (--counter);
-			continue;
-		} else {
-			h_dvd -= (h_s + carry);
-			l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
-				: (l_dvd - l_s);
-			h_s >>= 1;
-			l_s = s << (--counter);
-			div |= 1;
-			continue;
-		}
-
-	} while (counter > -1);
-	/* overflow */
-	if (h_dvd || (l_dvd > s)) {
-		x86emu_intr_raise(0);
-		return;
-	}
-	mod = l_dvd;
-#endif
-	CLEAR_FLAG(F_CF);
-	CLEAR_FLAG(F_AF);
-	CLEAR_FLAG(F_SF);
-	SET_FLAG(F_ZF);
-	CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
-	M.x86.R_EAX = (u32)div;
-	M.x86.R_EDX = (u32)mod;
-}
-
-#endif	/* __HAVE_INLINE_ASSEMBLER__ */
-
-/****************************************************************************
-REMARKS:
-Implements the IN string instruction and side effects.
-****************************************************************************/
-void ins(int size)
-{
-	int inc = size;
-
-	if (ACCESS_FLAG(F_DF)) {
-		inc = -size;
-	}
-	if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* in until CX is ZERO. */
-		u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
-					 M.x86.R_ECX : M.x86.R_CX);
-	switch (size) {
-	  case 1:
-	    while (count--) {
-				store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,
-									(*sys_inb)(M.x86.R_DX));
-				M.x86.R_DI += inc;
-	    }
-	    break;
-
-	  case 2:
-	    while (count--) {
-				store_data_word_abs(M.x86.R_ES, M.x86.R_DI,
-									(*sys_inw)(M.x86.R_DX));
-				M.x86.R_DI += inc;
-	    }
-	    break;
-	  case 4:
-	    while (count--) {
-				store_data_long_abs(M.x86.R_ES, M.x86.R_DI,
-									(*sys_inl)(M.x86.R_DX));
-				M.x86.R_DI += inc;
-		break;
-	    }
-	}
-		M.x86.R_CX = 0;
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			M.x86.R_ECX = 0;
-	}
-		M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    } else {
-	switch (size) {
-	  case 1:
-			store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,
-								(*sys_inb)(M.x86.R_DX));
-	    break;
-	  case 2:
-			store_data_word_abs(M.x86.R_ES, M.x86.R_DI,
-								(*sys_inw)(M.x86.R_DX));
-	    break;
-	  case 4:
-			store_data_long_abs(M.x86.R_ES, M.x86.R_DI,
-								(*sys_inl)(M.x86.R_DX));
-	    break;
-	}
-		M.x86.R_DI += inc;
-    }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OUT string instruction and side effects.
-****************************************************************************/
-void outs(int size)
-{
-    int inc = size;
-
-	if (ACCESS_FLAG(F_DF)) {
-	inc = -size;
-    }
-	if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
-	/* dont care whether REPE or REPNE */
-	/* out until CX is ZERO. */
-		u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
-					 M.x86.R_ECX : M.x86.R_CX);
-	switch (size) {
-	  case 1:
-	    while (count--) {
-				(*sys_outb)(M.x86.R_DX,
-						 fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI));
-				M.x86.R_SI += inc;
-	    }
-	    break;
-
-	  case 2:
-	    while (count--) {
-				(*sys_outw)(M.x86.R_DX,
-						 fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI));
-				M.x86.R_SI += inc;
-	    }
-	    break;
-	  case 4:
-	    while (count--) {
-				(*sys_outl)(M.x86.R_DX,
-						 fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI));
-				M.x86.R_SI += inc;
-		break;
-	    }
-	}
-		M.x86.R_CX = 0;
-		if (M.x86.mode & SYSMODE_PREFIX_DATA) {
-			M.x86.R_ECX = 0;
-	}
-		M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
-    } else {
-	switch (size) {
-	  case 1:
-			(*sys_outb)(M.x86.R_DX,
-					 fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI));
-	    break;
-	  case 2:
-			(*sys_outw)(M.x86.R_DX,
-					 fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI));
-	    break;
-	  case 4:
-			(*sys_outl)(M.x86.R_DX,
-					 fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI));
-	    break;
-	}
-		M.x86.R_SI += inc;
-    }
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Address to fetch word from
-
-REMARKS:
-Fetches a word from emulator memory using an absolute address.
-****************************************************************************/
-u16 mem_access_word(int addr)
-{
-DB(	if (CHECK_MEM_ACCESS())
-	  x86emu_check_mem_access(addr);)
-	return (*sys_rdw)(addr);
-}
-
-/****************************************************************************
-REMARKS:
-Pushes a word onto the stack.
-
-NOTE: Do not inline this, as (*sys_wrX) is already inline!
-****************************************************************************/
-void push_word(u16 w)
-{
-DB(	if (CHECK_SP_ACCESS())
-	  x86emu_check_sp_access();)
-	M.x86.R_SP -= 2;
-	(*sys_wrw)(((u32)M.x86.R_SS << 4)  + M.x86.R_SP, w);
-}
-
-/****************************************************************************
-REMARKS:
-Pushes a long onto the stack.
-
-NOTE: Do not inline this, as (*sys_wrX) is already inline!
-****************************************************************************/
-void push_long(u32 w)
-{
-DB(	if (CHECK_SP_ACCESS())
-	  x86emu_check_sp_access();)
-	M.x86.R_SP -= 4;
-	(*sys_wrl)(((u32)M.x86.R_SS << 4)  + M.x86.R_SP, w);
-}
-
-/****************************************************************************
-REMARKS:
-Pops a word from the stack.
-
-NOTE: Do not inline this, as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 pop_word(void)
-{
-	register u16 res;
-
-DB(	if (CHECK_SP_ACCESS())
-	  x86emu_check_sp_access();)
-	res = (*sys_rdw)(((u32)M.x86.R_SS << 4)  + M.x86.R_SP);
-	M.x86.R_SP += 2;
-	return res;
-}
-
-/****************************************************************************
-REMARKS:
-Pops a long from the stack.
-
-NOTE: Do not inline this, as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 pop_long(void)
-{
-    register u32 res;
-
-DB(	if (CHECK_SP_ACCESS())
-	  x86emu_check_sp_access();)
-	res = (*sys_rdl)(((u32)M.x86.R_SS << 4)  + M.x86.R_SP);
-	M.x86.R_SP += 4;
-    return res;
-}
-
-#ifdef	__HAVE_INLINE_ASSEMBLER__
-
-u16 aaa_word (u16 d)
-{ return aaa_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aas_word (u16 d)
-{ return aas_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aad_word (u16 d)
-{ return aad_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aam_word (u8 d)
-{ return aam_word_asm(&M.x86.R_EFLG,d); }
-
-u8 adc_byte (u8 d, u8 s)
-{ return adc_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 adc_word (u16 d, u16 s)
-{ return adc_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 adc_long (u32 d, u32 s)
-{ return adc_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 add_byte (u8 d, u8 s)
-{ return add_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 add_word (u16 d, u16 s)
-{ return add_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 add_long (u32 d, u32 s)
-{ return add_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 and_byte (u8 d, u8 s)
-{ return and_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 and_word (u16 d, u16 s)
-{ return and_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 and_long (u32 d, u32 s)
-{ return and_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 cmp_byte (u8 d, u8 s)
-{ return cmp_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 cmp_word (u16 d, u16 s)
-{ return cmp_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 cmp_long (u32 d, u32 s)
-{ return cmp_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 daa_byte (u8 d)
-{ return daa_byte_asm(&M.x86.R_EFLG,d); }
-
-u8 das_byte (u8 d)
-{ return das_byte_asm(&M.x86.R_EFLG,d); }
-
-u8 dec_byte (u8 d)
-{ return dec_byte_asm(&M.x86.R_EFLG,d); }
-
-u16 dec_word (u16 d)
-{ return dec_word_asm(&M.x86.R_EFLG,d); }
-
-u32 dec_long (u32 d)
-{ return dec_long_asm(&M.x86.R_EFLG,d); }
-
-u8 inc_byte (u8 d)
-{ return inc_byte_asm(&M.x86.R_EFLG,d); }
-
-u16 inc_word (u16 d)
-{ return inc_word_asm(&M.x86.R_EFLG,d); }
-
-u32 inc_long (u32 d)
-{ return inc_long_asm(&M.x86.R_EFLG,d); }
-
-u8 or_byte (u8 d, u8 s)
-{ return or_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 or_word (u16 d, u16 s)
-{ return or_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 or_long (u32 d, u32 s)
-{ return or_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 neg_byte (u8 s)
-{ return neg_byte_asm(&M.x86.R_EFLG,s); }
-
-u16 neg_word (u16 s)
-{ return neg_word_asm(&M.x86.R_EFLG,s); }
-
-u32 neg_long (u32 s)
-{ return neg_long_asm(&M.x86.R_EFLG,s); }
-
-u8 not_byte (u8 s)
-{ return not_byte_asm(&M.x86.R_EFLG,s); }
-
-u16 not_word (u16 s)
-{ return not_word_asm(&M.x86.R_EFLG,s); }
-
-u32 not_long (u32 s)
-{ return not_long_asm(&M.x86.R_EFLG,s); }
-
-u8 rcl_byte (u8 d, u8 s)
-{ return rcl_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rcl_word (u16 d, u8 s)
-{ return rcl_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rcl_long (u32 d, u8 s)
-{ return rcl_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 rcr_byte (u8 d, u8 s)
-{ return rcr_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rcr_word (u16 d, u8 s)
-{ return rcr_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rcr_long (u32 d, u8 s)
-{ return rcr_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 rol_byte (u8 d, u8 s)
-{ return rol_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rol_word (u16 d, u8 s)
-{ return rol_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rol_long (u32 d, u8 s)
-{ return rol_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 ror_byte (u8 d, u8 s)
-{ return ror_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 ror_word (u16 d, u8 s)
-{ return ror_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 ror_long (u32 d, u8 s)
-{ return ror_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 shl_byte (u8 d, u8 s)
-{ return shl_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shl_word (u16 d, u8 s)
-{ return shl_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 shl_long (u32 d, u8 s)
-{ return shl_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 shr_byte (u8 d, u8 s)
-{ return shr_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shr_word (u16 d, u8 s)
-{ return shr_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 shr_long (u32 d, u8 s)
-{ return shr_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 sar_byte (u8 d, u8 s)
-{ return sar_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sar_word (u16 d, u8 s)
-{ return sar_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sar_long (u32 d, u8 s)
-{ return sar_long_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shld_word (u16 d, u16 fill, u8 s)
-{ return shld_word_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u32 shld_long (u32 d, u32 fill, u8 s)
-{ return shld_long_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u16 shrd_word (u16 d, u16 fill, u8 s)
-{ return shrd_word_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u32 shrd_long (u32 d, u32 fill, u8 s)
-{ return shrd_long_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u8 sbb_byte (u8 d, u8 s)
-{ return sbb_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sbb_word (u16 d, u16 s)
-{ return sbb_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sbb_long (u32 d, u32 s)
-{ return sbb_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 sub_byte (u8 d, u8 s)
-{ return sub_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sub_word (u16 d, u16 s)
-{ return sub_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sub_long (u32 d, u32 s)
-{ return sub_long_asm(&M.x86.R_EFLG,d,s); }
-
-void test_byte (u8 d, u8 s)
-{ test_byte_asm(&M.x86.R_EFLG,d,s); }
-
-void test_word (u16 d, u16 s)
-{ test_word_asm(&M.x86.R_EFLG,d,s); }
-
-void test_long (u32 d, u32 s)
-{ test_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 xor_byte (u8 d, u8 s)
-{ return xor_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 xor_word (u16 d, u16 s)
-{ return xor_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 xor_long (u32 d, u32 s)
-{ return xor_long_asm(&M.x86.R_EFLG,d,s); }
-
-void imul_byte (u8 s)
-{ imul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s); }
-
-void imul_word (u16 s)
-{ imul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s); }
-
-void imul_long (u32 s)
-{ imul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s); }
-
-void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s)
-{ imul_long_asm(&M.x86.R_EFLG,res_lo,res_hi,d,s); }
-
-void mul_byte (u8 s)
-{ mul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s); }
-
-void mul_word (u16 s)
-{ mul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s); }
-
-void mul_long (u32 s)
-{ mul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s); }
-
-void idiv_byte (u8 s)
-{ idiv_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s); }
-
-void idiv_word (u16 s)
-{ idiv_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s); }
-
-void idiv_long (u32 s)
-{ idiv_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s); }
-
-void div_byte (u8 s)
-{ div_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s); }
-
-void div_word (u16 s)
-{ div_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s); }
-
-void div_long (u32 s)
-{ div_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s); }
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/sys.c b/board/MAI/bios_emulator/scitech/src/x86emu/sys.c
deleted file mode 100644
index afe58f8647..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/sys.c
+++ /dev/null
@@ -1,658 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  This file includes subroutines which are related to
-*				programmed I/O and memory access. Included in this module
-*				are default functions with limited usefulness. For real
-*				uses these functions will most likely be overriden by the
-*				user library.
-*
-****************************************************************************/
-
-#include "x86emu.h"
-#include "x86emu/regs.h"
-#include "x86emu/debug.h"
-#include "x86emu/prim_ops.h"
-#include <string.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-X86EMU_sysEnv		_X86EMU_env;		/* Global emulator machine state */
-X86EMU_intrFuncs	_X86EMU_intrTab[256];
-
-/*----------------------------- Implementation ----------------------------*/
-#ifdef __alpha__
-/* to cope with broken egcs-1.1.2 :-(((( */
-
-/*
- * inline functions to do unaligned accesses
- * from linux/include/asm-alpha/unaligned.h
- */
-
-/*
- * EGCS 1.1 knows about arbitrary unaligned loads.  Define some
- * packed structures to talk about such things with.
- */
-
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-struct __una_u64 { unsigned long  x __attribute__((packed)); };
-struct __una_u32 { unsigned int   x __attribute__((packed)); };
-struct __una_u16 { unsigned short x __attribute__((packed)); };
-#endif
-
-static __inline__ unsigned long ldq_u(unsigned long * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	const struct __una_u64 *ptr = (const struct __una_u64 *) r11;
-	return ptr->x;
-#else
-	unsigned long r1,r2;
-	__asm__("ldq_u %0,%3\n\t"
-		"ldq_u %1,%4\n\t"
-		"extql %0,%2,%0\n\t"
-		"extqh %1,%2,%1"
-		:"=&r" (r1), "=&r" (r2)
-		:"r" (r11),
-		 "m" (*r11),
-		 "m" (*(const unsigned long *)(7+(char *) r11)));
-	return r1 | r2;
-#endif
-}
-
-static __inline__ unsigned long ldl_u(unsigned int * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	const struct __una_u32 *ptr = (const struct __una_u32 *) r11;
-	return ptr->x;
-#else
-	unsigned long r1,r2;
-	__asm__("ldq_u %0,%3\n\t"
-		"ldq_u %1,%4\n\t"
-		"extll %0,%2,%0\n\t"
-		"extlh %1,%2,%1"
-		:"=&r" (r1), "=&r" (r2)
-		:"r" (r11),
-		 "m" (*r11),
-		 "m" (*(const unsigned long *)(3+(char *) r11)));
-	return r1 | r2;
-#endif
-}
-
-static __inline__ unsigned long ldw_u(unsigned short * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	const struct __una_u16 *ptr = (const struct __una_u16 *) r11;
-	return ptr->x;
-#else
-	unsigned long r1,r2;
-	__asm__("ldq_u %0,%3\n\t"
-		"ldq_u %1,%4\n\t"
-		"extwl %0,%2,%0\n\t"
-		"extwh %1,%2,%1"
-		:"=&r" (r1), "=&r" (r2)
-		:"r" (r11),
-		 "m" (*r11),
-		 "m" (*(const unsigned long *)(1+(char *) r11)));
-	return r1 | r2;
-#endif
-}
-
-/*
- * Elemental unaligned stores
- */
-
-static __inline__ void stq_u(unsigned long r5, unsigned long * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	struct __una_u64 *ptr = (struct __una_u64 *) r11;
-	ptr->x = r5;
-#else
-	unsigned long r1,r2,r3,r4;
-
-	__asm__("ldq_u %3,%1\n\t"
-		"ldq_u %2,%0\n\t"
-		"insqh %6,%7,%5\n\t"
-		"insql %6,%7,%4\n\t"
-		"mskqh %3,%7,%3\n\t"
-		"mskql %2,%7,%2\n\t"
-		"bis %3,%5,%3\n\t"
-		"bis %2,%4,%2\n\t"
-		"stq_u %3,%1\n\t"
-		"stq_u %2,%0"
-		:"=m" (*r11),
-		 "=m" (*(unsigned long *)(7+(char *) r11)),
-		 "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
-		:"r" (r5), "r" (r11));
-#endif
-}
-
-static __inline__ void stl_u(unsigned long r5, unsigned int * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	struct __una_u32 *ptr = (struct __una_u32 *) r11;
-	ptr->x = r5;
-#else
-	unsigned long r1,r2,r3,r4;
-
-	__asm__("ldq_u %3,%1\n\t"
-		"ldq_u %2,%0\n\t"
-		"inslh %6,%7,%5\n\t"
-		"insll %6,%7,%4\n\t"
-		"msklh %3,%7,%3\n\t"
-		"mskll %2,%7,%2\n\t"
-		"bis %3,%5,%3\n\t"
-		"bis %2,%4,%2\n\t"
-		"stq_u %3,%1\n\t"
-		"stq_u %2,%0"
-		:"=m" (*r11),
-		 "=m" (*(unsigned long *)(3+(char *) r11)),
-		 "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
-		:"r" (r5), "r" (r11));
-#endif
-}
-
-static __inline__ void stw_u(unsigned long r5, unsigned short * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-	struct __una_u16 *ptr = (struct __una_u16 *) r11;
-	ptr->x = r5;
-#else
-	unsigned long r1,r2,r3,r4;
-
-	__asm__("ldq_u %3,%1\n\t"
-		"ldq_u %2,%0\n\t"
-		"inswh %6,%7,%5\n\t"
-		"inswl %6,%7,%4\n\t"
-		"mskwh %3,%7,%3\n\t"
-		"mskwl %2,%7,%2\n\t"
-		"bis %3,%5,%3\n\t"
-		"bis %2,%4,%2\n\t"
-		"stq_u %3,%1\n\t"
-		"stq_u %2,%0"
-		:"=m" (*r11),
-		 "=m" (*(unsigned long *)(1+(char *) r11)),
-		 "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
-		:"r" (r5), "r" (r11));
-#endif
-}
-
-#elif defined (__ia64__)
-/*
- * EGCS 1.1 knows about arbitrary unaligned loads.  Define some
- * packed structures to talk about such things with.
- */
-struct __una_u64 { unsigned long  x __attribute__((packed)); };
-struct __una_u32 { unsigned int   x __attribute__((packed)); };
-struct __una_u16 { unsigned short x __attribute__((packed)); };
-
-static __inline__ unsigned long
-__uldq (const unsigned long * r11)
-{
-	const struct __una_u64 *ptr = (const struct __una_u64 *) r11;
-	return ptr->x;
-}
-
-static __inline__ unsigned long
-uldl (const unsigned int * r11)
-{
-	const struct __una_u32 *ptr = (const struct __una_u32 *) r11;
-	return ptr->x;
-}
-
-static __inline__ unsigned long
-uldw (const unsigned short * r11)
-{
-	const struct __una_u16 *ptr = (const struct __una_u16 *) r11;
-	return ptr->x;
-}
-
-static __inline__ void
-ustq (unsigned long r5, unsigned long * r11)
-{
-	struct __una_u64 *ptr = (struct __una_u64 *) r11;
-	ptr->x = r5;
-}
-
-static __inline__ void
-ustl (unsigned long r5, unsigned int * r11)
-{
-	struct __una_u32 *ptr = (struct __una_u32 *) r11;
-	ptr->x = r5;
-}
-
-static __inline__ void
-ustw (unsigned long r5, unsigned short * r11)
-{
-	struct __una_u16 *ptr = (struct __una_u16 *) r11;
-	ptr->x = r5;
-}
-
-#endif
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-
-RETURNS:
-Byte value read from emulator memory.
-
-REMARKS:
-Reads a byte value from the emulator memory.
-****************************************************************************/
-u8 X86API rdb(
-    u32 addr)
-{
-	u8 val;
-
-	if (addr > M.mem_size - 1) {
-		DB(printk("mem_read: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-	val = *(u8*)(M.mem_base + addr);
-DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 1 -> %#x\n", addr, val);)
-	return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-
-RETURNS:
-Word value read from emulator memory.
-
-REMARKS:
-Reads a word value from the emulator memory.
-****************************************************************************/
-u16 X86API rdw(
-	u32 addr)
-{
-	u16 val = 0;
-
-	if (addr > M.mem_size - 2) {
-		DB(printk("mem_read: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-		val = (*(u8*)(M.mem_base + addr) |
-			  (*(u8*)(M.mem_base + addr + 1) << 8));
-		}
-	else
-#endif
-#ifdef __alpha__
-		val = ldw_u((u16*)(M.mem_base + addr));
-#elif defined (__ia64__)
-	  val = uldw((u16*)(M.mem_base + addr));
-#else
-		val = *(u16*)(M.mem_base + addr);
-#endif
-		DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 2 -> %#x\n", addr, val);)
-    return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-
-RETURNS:
-Long value read from emulator memory.
-REMARKS:
-Reads a long value from the emulator memory.
-****************************************************************************/
-u32 X86API rdl(
-	u32 addr)
-{
-	u32 val = 0;
-
-	if (addr > M.mem_size - 4) {
-		DB(printk("mem_read: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x3) {
-		val = (*(u8*)(M.mem_base + addr + 0) |
-			  (*(u8*)(M.mem_base + addr + 1) << 8) |
-			  (*(u8*)(M.mem_base + addr + 2) << 16) |
-			  (*(u8*)(M.mem_base + addr + 3) << 24));
-		}
-	else
-#endif
-#ifdef __alpha__
-		val = ldl_u((u32*)(M.mem_base + addr));
-#elif defined (__ia64__)
-		val = uldl((u32*)(M.mem_base + addr));
-#else
-		val = *(u32*)(M.mem_base + addr);
-#endif
-DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 4 -> %#x\n", addr, val);)
-	return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-val		- Value to store
-
-REMARKS:
-Writes a byte value to emulator memory.
-****************************************************************************/
-void X86API wrb(
-	u32 addr,
-	u8 val)
-{
-DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 1 <- %#x\n", addr, val);)
-    if (addr > M.mem_size - 1) {
-		DB(printk("mem_write: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-	*(u8*)(M.mem_base + addr) = val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-val		- Value to store
-
-REMARKS:
-Writes a word value to emulator memory.
-****************************************************************************/
-void X86API wrw(
-	u32 addr,
-	u16 val)
-{
-DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 2 <- %#x\n", addr, val);)
-	if (addr > M.mem_size - 2) {
-		DB(printk("mem_write: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-		*(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
-		*(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
-		}
-	else
-#endif
-#ifdef __alpha__
-	 stw_u(val,(u16*)(M.mem_base + addr));
-#elif defined (__ia64__)
-	 ustw(val,(u16*)(M.mem_base + addr));
-#else
-	 *(u16*)(M.mem_base + addr) = val;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- Emulator memory address to read
-val		- Value to store
-
-REMARKS:
-Writes a long value to emulator memory.
-****************************************************************************/
-void X86API wrl(
-	u32 addr,
-	u32 val)
-{
-DB(	if (DEBUG_MEM_TRACE())
-		printk("%#08x 4 <- %#x\n", addr, val);)
-	if (addr > M.mem_size - 4) {
-		DB(printk("mem_write: address %#lx out of range!\n", addr);)
-		HALT_SYS();
-		}
-#ifdef __BIG_ENDIAN__
-	if (addr & 0x1) {
-		*(u8*)(M.mem_base + addr + 0) = (val >>  0) & 0xff;
-		*(u8*)(M.mem_base + addr + 1) = (val >>  8) & 0xff;
-		*(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
-		*(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
-		}
-	else
-#endif
-#ifdef __alpha__
-	 stl_u(val,(u32*)(M.mem_base + addr));
-#elif defined (__ia64__)
-	 ustl(val,(u32*)(M.mem_base + addr));
-#else
-	 *(u32*)(M.mem_base + addr) = val;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO byte read function. Doesn't perform real inb.
-****************************************************************************/
-static u8 X86API p_inb(
-	X86EMU_pioAddr addr)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("inb %#04x \n", addr);)
-	return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO word read function. Doesn't perform real inw.
-****************************************************************************/
-static u16 X86API p_inw(
-	X86EMU_pioAddr addr)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("inw %#04x \n", addr);)
-	return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO long read function. Doesn't perform real inl.
-****************************************************************************/
-static u32 X86API p_inl(
-	X86EMU_pioAddr addr)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("inl %#04x \n", addr);)
-	return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to write
-val     - Value to store
-REMARKS:
-Default PIO byte write function. Doesn't perform real outb.
-****************************************************************************/
-static void X86API p_outb(
-	X86EMU_pioAddr addr,
-	u8 val)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("outb %#02x -> %#04x \n", val, addr);)
-    return;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to write
-val     - Value to store
-REMARKS:
-Default PIO word write function. Doesn't perform real outw.
-****************************************************************************/
-static void X86API p_outw(
-	X86EMU_pioAddr addr,
-	u16 val)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("outw %#04x -> %#04x \n", val, addr);)
-	return;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr	- PIO address to write
-val     - Value to store
-REMARKS:
-Default PIO ;ong write function. Doesn't perform real outl.
-****************************************************************************/
-static void X86API p_outl(
-	X86EMU_pioAddr addr,
-	u32 val)
-{
-DB(	if (DEBUG_IO_TRACE())
-		printk("outl %#08x -> %#04x \n", val, addr);)
-    return;
-}
-
-/*------------------------- Global Variables ------------------------------*/
-
-u8  	(X86APIP sys_rdb)(u32 addr) 			            = rdb;
-u16 	(X86APIP sys_rdw)(u32 addr) 			            = rdw;
-u32 	(X86APIP sys_rdl)(u32 addr) 			            = rdl;
-void 	(X86APIP sys_wrb)(u32 addr,u8 val) 		            = wrb;
-void 	(X86APIP sys_wrw)(u32 addr,u16 val) 	            = wrw;
-void 	(X86APIP sys_wrl)(u32 addr,u32 val) 	            = wrl;
-u8  	(X86APIP sys_inb)(X86EMU_pioAddr addr)	            = p_inb;
-u16 	(X86APIP sys_inw)(X86EMU_pioAddr addr)	            = p_inw;
-u32 	(X86APIP sys_inl)(X86EMU_pioAddr addr)              = p_inl;
-void 	(X86APIP sys_outb)(X86EMU_pioAddr addr, u8 val) 	= p_outb;
-void 	(X86APIP sys_outw)(X86EMU_pioAddr addr, u16 val)	= p_outw;
-void 	(X86APIP sys_outl)(X86EMU_pioAddr addr, u32 val)	= p_outl;
-
-/*----------------------------- Setup -------------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-funcs	- New memory function pointers to make active
-
-REMARKS:
-This function is used to set the pointers to functions which access
-memory space, allowing the user application to override these functions
-and hook them out as necessary for their application.
-****************************************************************************/
-void X86EMU_setupMemFuncs(
-	X86EMU_memFuncs *funcs)
-{
-	sys_rdb = funcs->rdb;
-    sys_rdw = funcs->rdw;
-    sys_rdl = funcs->rdl;
-    sys_wrb = funcs->wrb;
-    sys_wrw = funcs->wrw;
-    sys_wrl = funcs->wrl;
-}
-
-/****************************************************************************
-PARAMETERS:
-funcs	- New programmed I/O function pointers to make active
-
-REMARKS:
-This function is used to set the pointers to functions which access
-I/O space, allowing the user application to override these functions
-and hook them out as necessary for their application.
-****************************************************************************/
-void X86EMU_setupPioFuncs(
-	X86EMU_pioFuncs *funcs)
-{
-    sys_inb = funcs->inb;
-    sys_inw = funcs->inw;
-    sys_inl = funcs->inl;
-    sys_outb = funcs->outb;
-    sys_outw = funcs->outw;
-    sys_outl = funcs->outl;
-}
-
-/****************************************************************************
-PARAMETERS:
-funcs	- New interrupt vector table to make active
-
-REMARKS:
-This function is used to set the pointers to functions which handle
-interrupt processing in the emulator, allowing the user application to
-hook interrupts as necessary for their application. Any interrupts that
-are not hooked by the user application, and reflected and handled internally
-in the emulator via the interrupt vector table. This allows the application
-to get control when the code being emulated executes specific software
-interrupts.
-****************************************************************************/
-void X86EMU_setupIntrFuncs(
-	X86EMU_intrFuncs funcs[])
-{
-    int i;
-
-	for (i=0; i < 256; i++)
-		_X86EMU_intrTab[i] = NULL;
-	if (funcs) {
-		for (i = 0; i < 256; i++)
-			_X86EMU_intrTab[i] = funcs[i];
-		}
-}
-
-/****************************************************************************
-PARAMETERS:
-int	- New software interrupt to prepare for
-
-REMARKS:
-This function is used to set up the emulator state to exceute a software
-interrupt. This can be used by the user application code to allow an
-interrupt to be hooked, examined and then reflected back to the emulator
-so that the code in the emulator will continue processing the software
-interrupt as per normal. This essentially allows system code to actively
-hook and handle certain software interrupts as necessary.
-****************************************************************************/
-void X86EMU_prepareForInt(
-	int num)
-{
-    push_word((u16)M.x86.R_FLG);
-    CLEAR_FLAG(F_IF);
-    CLEAR_FLAG(F_TF);
-    push_word(M.x86.R_CS);
-    M.x86.R_CS = mem_access_word(num * 4 + 2);
-    push_word(M.x86.R_IP);
-    M.x86.R_IP = mem_access_word(num * 4);
-	M.x86.intr = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/validate.c b/board/MAI/bios_emulator/scitech/src/x86emu/validate.c
deleted file mode 100644
index c951301f96..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/validate.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:     Watcom C 10.6 or later
-* Environment:  32-bit DOS
-* Developer:    Kendall Bennett
-*
-* Description:  Program to validate the x86 emulator library for
-*               correctness. We run the emulator primitive operations
-*               functions against the real x86 CPU, and compare the result
-*               and flags to ensure correctness.
-*
-*               We use inline assembler to compile and build this program.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#include "x86emu.h"
-#include "x86emu/prim_asm.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define true 1
-#define false 0
-
-#define ALL_FLAGS   (F_CF | F_PF | F_AF | F_ZF | F_SF | F_OF)
-
-#define VAL_START_BINARY(parm_type,res_type,dmax,smax,dincr,sincr)  \
-{                                                                   \
-    parm_type   d,s;                                                \
-    res_type    r,r_asm;                                            \
-	ulong     	flags,inflags;                                      \
-	int         f,failed = false;                                   \
-    char        buf1[80],buf2[80];                                  \
-    for (d = 0; d < dmax; d += dincr) {                             \
-	for (s = 0; s < smax; s += sincr) {                         \
-	    M.x86.R_EFLG = inflags = flags = def_flags;             \
-	    for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_BINARY(name)                                           \
-		r_asm = name##_asm(&flags,d,s);                         \
-		r = name(d,s);                                  \
-		if (r != r_asm || M.x86.R_EFLG != flags)                \
-		    failed = true;                                      \
-		if (failed || trace) {
-
-#define VAL_TEST_BINARY_VOID(name)                                      \
-		name##_asm(&flags,d,s);                                 \
-		name(d,s);                                      \
-		r = r_asm = 0;                                          \
-		if (M.x86.R_EFLG != flags)                              \
-		    failed = true;                                      \
-		if (failed || trace) {
-
-#define VAL_FAIL_BYTE_BYTE_BINARY(name)                                                                 \
-		    if (failed)                                                                         \
-			printk("fail\n");                                                               \
-		    printk("0x%02X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n",                         \
-			r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));     \
-		    printk("0x%02X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n",                         \
-			r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_WORD_WORD_BINARY(name)                                                                 \
-		    if (failed)                                                                         \
-			printk("fail\n");                                                               \
-		    printk("0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n",                         \
-			r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));   \
-		    printk("0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n",                         \
-			r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_LONG_BINARY(name)                                                                 \
-		    if (failed)                                                                         \
-			printk("fail\n");                                                               \
-		    printk("0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n",                         \
-			r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
-		    printk("0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n",                         \
-			r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_BINARY()                                                    \
-		    }                                                       \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_BYTE_BYTE_BINARY(name)          \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_BINARY(u8,u8,0xFF,0xFF,1,1)   \
-    VAL_TEST_BINARY(name)                   \
-    VAL_FAIL_BYTE_BYTE_BINARY(name)         \
-    VAL_END_BINARY()
-
-#define VAL_WORD_WORD_BINARY(name)                      \
-    printk("Validating %s ... ", #name);                \
-    VAL_START_BINARY(u16,u16,0xFF00,0xFF00,0x100,0x100) \
-    VAL_TEST_BINARY(name)                               \
-    VAL_FAIL_WORD_WORD_BINARY(name)                     \
-    VAL_END_BINARY()
-
-#define VAL_LONG_LONG_BINARY(name)                                      \
-    printk("Validating %s ... ", #name);                                \
-    VAL_START_BINARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000) \
-    VAL_TEST_BINARY(name)                                               \
-    VAL_FAIL_LONG_LONG_BINARY(name)                                     \
-    VAL_END_BINARY()
-
-#define VAL_VOID_BYTE_BINARY(name)          \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_BINARY(u8,u8,0xFF,0xFF,1,1)   \
-    VAL_TEST_BINARY_VOID(name)              \
-    VAL_FAIL_BYTE_BYTE_BINARY(name)         \
-    VAL_END_BINARY()
-
-#define VAL_VOID_WORD_BINARY(name)                      \
-    printk("Validating %s ... ", #name);                \
-    VAL_START_BINARY(u16,u16,0xFF00,0xFF00,0x100,0x100) \
-    VAL_TEST_BINARY_VOID(name)                          \
-    VAL_FAIL_WORD_WORD_BINARY(name)                     \
-    VAL_END_BINARY()
-
-#define VAL_VOID_LONG_BINARY(name)                                      \
-    printk("Validating %s ... ", #name);                                \
-    VAL_START_BINARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000) \
-    VAL_TEST_BINARY_VOID(name)                                          \
-    VAL_FAIL_LONG_LONG_BINARY(name)                                     \
-    VAL_END_BINARY()
-
-#define VAL_BYTE_ROTATE(name)               \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_BINARY(u8,u8,0xFF,8,1,1)      \
-    VAL_TEST_BINARY(name)                   \
-    VAL_FAIL_BYTE_BYTE_BINARY(name)         \
-    VAL_END_BINARY()
-
-#define VAL_WORD_ROTATE(name)                           \
-    printk("Validating %s ... ", #name);                \
-    VAL_START_BINARY(u16,u16,0xFF00,16,0x100,1)         \
-    VAL_TEST_BINARY(name)                               \
-    VAL_FAIL_WORD_WORD_BINARY(name)                     \
-    VAL_END_BINARY()
-
-#define VAL_LONG_ROTATE(name)                                           \
-    printk("Validating %s ... ", #name);                                \
-    VAL_START_BINARY(u32,u32,0xFF000000,32,0x1000000,1)                 \
-    VAL_TEST_BINARY(name)                                               \
-    VAL_FAIL_LONG_LONG_BINARY(name)                                     \
-    VAL_END_BINARY()
-
-#define VAL_START_TERNARY(parm_type,res_type,dmax,smax,dincr,sincr,maxshift)\
-{                                                                   \
-    parm_type   d,s;                                                \
-    res_type    r,r_asm;                                            \
-    u8          shift;                                              \
-	u32         flags,inflags;                                      \
-    int         f,failed = false;                                   \
-    char        buf1[80],buf2[80];                                  \
-    for (d = 0; d < dmax; d += dincr) {                             \
-	for (s = 0; s < smax; s += sincr) {                         \
-	    for (shift = 0; shift < maxshift; shift += 1) {        \
-		M.x86.R_EFLG = inflags = flags = def_flags;         \
-		for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_TERNARY(name)                                          \
-		    r_asm = name##_asm(&flags,d,s,shift);               \
-		    r = name(d,s,shift);                           \
-		    if (r != r_asm || M.x86.R_EFLG != flags)            \
-			failed = true;                                  \
-		    if (failed || trace) {
-
-#define VAL_FAIL_WORD_WORD_TERNARY(name)                                                                \
-			if (failed)                                                                         \
-			    printk("fail\n");                                                               \
-			printk("0x%04X = %-15s(0x%04X,0x%04X,%d), flags = %s -> %s\n",                      \
-			    r, #name, d, s, shift, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));   \
-			printk("0x%04X = %-15s(0x%04X,0x%04X,%d), flags = %s -> %s\n",                      \
-			    r_asm, #name"_asm", d, s, shift, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_LONG_TERNARY(name)                                                                \
-			if (failed)                                                                         \
-			    printk("fail\n");                                                               \
-			printk("0x%08X = %-15s(0x%08X,0x%08X,%d), flags = %s -> %s\n",                      \
-			    r, #name, d, s, shift, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));  \
-			printk("0x%08X = %-15s(0x%08X,0x%08X,%d), flags = %s -> %s\n",                      \
-			    r_asm, #name"_asm", d, s, shift, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_TERNARY()                                                   \
-			}                                                       \
-		    M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		    if (failed)                                                 \
-			break;                                                  \
-		    }                                                           \
-		if (failed)                                                     \
-		    break;                                                      \
-		}                                                               \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_WORD_ROTATE_DBL(name)                           \
-    printk("Validating %s ... ", #name);                    \
-    VAL_START_TERNARY(u16,u16,0xFF00,0xFF00,0x100,0x100,16) \
-    VAL_TEST_TERNARY(name)                                  \
-    VAL_FAIL_WORD_WORD_TERNARY(name)                        \
-    VAL_END_TERNARY()
-
-#define VAL_LONG_ROTATE_DBL(name)                                           \
-    printk("Validating %s ... ", #name);                                    \
-    VAL_START_TERNARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000,32) \
-    VAL_TEST_TERNARY(name)                                                  \
-    VAL_FAIL_LONG_LONG_TERNARY(name)                                        \
-    VAL_END_TERNARY()
-
-#define VAL_START_UNARY(parm_type,max,incr)                 \
-{                                                           \
-    parm_type   d,r,r_asm;                                  \
-	u32         flags,inflags;                              \
-    int         f,failed = false;                           \
-    char        buf1[80],buf2[80];                          \
-    for (d = 0; d < max; d += incr) {                       \
-	M.x86.R_EFLG = inflags = flags = def_flags;         \
-	for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_UNARY(name)                                \
-	    r_asm = name##_asm(&flags,d);                   \
-	    r = name(d);                                \
-	    if (r != r_asm || M.x86.R_EFLG != flags) {      \
-		failed = true;
-
-#define VAL_FAIL_BYTE_UNARY(name)                                                               \
-		printk("fail\n");                                                               \
-		printk("0x%02X = %-15s(0x%02X), flags = %s -> %s\n",                            \
-		    r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));    \
-		printk("0x%02X = %-15s(0x%02X), flags = %s -> %s\n",                            \
-		    r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_WORD_UNARY(name)                                                               \
-		printk("fail\n");                                                               \
-		printk("0x%04X = %-15s(0x%04X), flags = %s -> %s\n",                            \
-		    r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));  \
-		printk("0x%04X = %-15s(0x%04X), flags = %s -> %s\n",                            \
-		    r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_UNARY(name)                                                               \
-		printk("fail\n");                                                               \
-		printk("0x%08X = %-15s(0x%08X), flags = %s -> %s\n",                            \
-		    r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));    \
-		printk("0x%08X = %-15s(0x%08X), flags = %s -> %s\n",                            \
-		    r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_UNARY()                                                 \
-		}                                                       \
-	    M.x86.R_EFLG = inflags = flags = def_flags | ALL_FLAGS;     \
-	    if (failed)                                                 \
-		break;                                                  \
-	    }                                                           \
-	if (failed)                                                     \
-	    break;                                                      \
-	}                                                               \
-    if (!failed)                                                        \
-	printk("passed\n");                                             \
-}
-
-#define VAL_BYTE_UNARY(name)                \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_UNARY(u8,0xFF,0x1)            \
-    VAL_TEST_UNARY(name)                    \
-    VAL_FAIL_BYTE_UNARY(name)               \
-    VAL_END_UNARY()
-
-#define VAL_WORD_UNARY(name)                \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_UNARY(u16,0xFF00,0x100)       \
-    VAL_TEST_UNARY(name)                    \
-    VAL_FAIL_WORD_UNARY(name)               \
-    VAL_END_UNARY()
-
-#define VAL_WORD_BYTE_UNARY(name)           \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_UNARY(u16,0xFF,0x1)           \
-    VAL_TEST_UNARY(name)                    \
-    VAL_FAIL_WORD_UNARY(name)               \
-    VAL_END_UNARY()
-
-#define VAL_LONG_UNARY(name)                \
-    printk("Validating %s ... ", #name);    \
-    VAL_START_UNARY(u32,0xFF000000,0x1000000) \
-    VAL_TEST_UNARY(name)                    \
-    VAL_FAIL_LONG_UNARY(name)               \
-    VAL_END_UNARY()
-
-#define VAL_BYTE_MUL(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u8          d,s;                                                    \
-    u16         r,r_asm;                                                \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF; d += 1) {                                     \
-	for (s = 0; s < 0xFF; s += 1) {                                 \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		name##_asm(&flags,&r_asm,d,s);                          \
-		M.x86.R_AL = d;                                         \
-		name(s);                                            \
-		r = M.x86.R_AX;                                         \
-		if (r != r_asm || M.x86.R_EFLG != flags)                \
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%04X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n",                         \
-			r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));     \
-		    printk("0x%04X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n",                         \
-			r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));  \
-		    }                                                       \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_WORD_MUL(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u16         d,s;                                                    \
-    u16         r_lo,r_asm_lo;                                          \
-    u16         r_hi,r_asm_hi;                                          \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF00; d += 0x100) {                               \
-	for (s = 0; s < 0xFF00; s += 0x100) {                           \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		name##_asm(&flags,&r_asm_lo,&r_asm_hi,d,s);             \
-		M.x86.R_AX = d;                                         \
-		name(s);                                            \
-		r_lo = M.x86.R_AX;                                      \
-		r_hi = M.x86.R_DX;                                      \
-		if (r_lo != r_asm_lo || r_hi != r_asm_hi || M.x86.R_EFLG != flags)\
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%04X:0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n",                              \
-			r_hi,r_lo, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));       \
-		    printk("0x%04X:0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n",                              \
-			r_asm_hi,r_asm_lo, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));  \
-		    }                                                                                               \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_LONG_MUL(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u32         d,s;                                                    \
-    u32         r_lo,r_asm_lo;                                          \
-    u32         r_hi,r_asm_hi;                                          \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF000000; d += 0x1000000) {                       \
-	for (s = 0; s < 0xFF000000; s += 0x1000000) {                   \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		name##_asm(&flags,&r_asm_lo,&r_asm_hi,d,s);             \
-		M.x86.R_EAX = d;                                        \
-		name(s);                                            \
-		r_lo = M.x86.R_EAX;                                     \
-		r_hi = M.x86.R_EDX;                                     \
-		if (r_lo != r_asm_lo || r_hi != r_asm_hi || M.x86.R_EFLG != flags)\
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%08X:0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n",                              \
-			r_hi,r_lo, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));       \
-		    printk("0x%08X:0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n",                              \
-			r_asm_hi,r_asm_lo, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));  \
-		    }                                                                                               \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_BYTE_DIV(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u16         d,s;                                                    \
-    u8          r_quot,r_rem,r_asm_quot,r_asm_rem;                      \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF00; d += 0x100) {                               \
-	for (s = 1; s < 0xFF; s += 1) {                                 \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		M.x86.intr = 0;                                         \
-		M.x86.R_AX = d;                                         \
-		name(s);                                            \
-		r_quot = M.x86.R_AL;                                    \
-		r_rem = M.x86.R_AH;                                     \
-		if (M.x86.intr & INTR_SYNCH)                            \
-		    continue;                                           \
-		name##_asm(&flags,&r_asm_quot,&r_asm_rem,d,s);          \
-		if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%02X:0x%02X = %-15s(0x%04X,0x%02X), flags = %s -> %s\n",                      \
-			r_quot, r_rem, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));     \
-		    printk("0x%02X:0x%02X = %-15s(0x%04X,0x%02X), flags = %s -> %s\n",                      \
-			r_asm_quot, r_asm_rem, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));  \
-		    }                                                       \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_WORD_DIV(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u32         d,s;                                                    \
-    u16         r_quot,r_rem,r_asm_quot,r_asm_rem;                      \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF000000; d += 0x1000000) {                       \
-	for (s = 0x100; s < 0xFF00; s += 0x100) {                       \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		M.x86.intr = 0;                                         \
-		M.x86.R_AX = d & 0xFFFF;                                \
-		M.x86.R_DX = d >> 16;                                   \
-		name(s);                                            \
-		r_quot = M.x86.R_AX;                                    \
-		r_rem = M.x86.R_DX;                                     \
-		if (M.x86.intr & INTR_SYNCH)                            \
-		    continue;                                           \
-		name##_asm(&flags,&r_asm_quot,&r_asm_rem,d & 0xFFFF,d >> 16,s);\
-		if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%04X:0x%04X = %-15s(0x%08X,0x%04X), flags = %s -> %s\n",                      \
-			r_quot, r_rem, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));     \
-		    printk("0x%04X:0x%04X = %-15s(0x%08X,0x%04X), flags = %s -> %s\n",                      \
-			r_asm_quot, r_asm_rem, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));  \
-		    }                                                       \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-#define VAL_LONG_DIV(name)                                              \
-    printk("Validating %s ... ", #name);                                \
-{                                                                       \
-    u32         d,s;                                                    \
-    u32         r_quot,r_rem,r_asm_quot,r_asm_rem;                      \
-	u32         flags,inflags;                                          \
-    int         f,failed = false;                                       \
-    char        buf1[80],buf2[80];                                      \
-    for (d = 0; d < 0xFF000000; d += 0x1000000) {                       \
-	for (s = 0x100; s < 0xFF00; s += 0x100) {                       \
-	    M.x86.R_EFLG = inflags = flags = def_flags;                 \
-	    for (f = 0; f < 2; f++) {                                   \
-		M.x86.intr = 0;                                         \
-		M.x86.R_EAX = d;                                        \
-		M.x86.R_EDX = 0;                                        \
-		name(s);                                            \
-		r_quot = M.x86.R_EAX;                                   \
-		r_rem = M.x86.R_EDX;                                    \
-		if (M.x86.intr & INTR_SYNCH)                            \
-		    continue;                                           \
-		name##_asm(&flags,&r_asm_quot,&r_asm_rem,d,0,s);        \
-		if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
-		    failed = true;                                      \
-		if (failed || trace) {                                  \
-		    if (failed)                                         \
-			printk("fail\n");                               \
-		    printk("0x%08X:0x%08X = %-15s(0x%08X:0x%08X,0x%08X), flags = %s -> %s\n",                       \
-			r_quot, r_rem, #name, 0, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG));  \
-		    printk("0x%08X:0x%08X = %-15s(0x%08X:0x%08X,0x%08X), flags = %s -> %s\n",                       \
-			r_asm_quot, r_asm_rem, #name"_asm", 0, d, s, print_flags(buf1,inflags), print_flags(buf2,flags));   \
-		    }                                                       \
-		M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF);   \
-		if (failed)                                                 \
-		    break;                                                  \
-		}                                                           \
-	    if (failed)                                                     \
-		break;                                                      \
-	    }                                                               \
-	if (failed)                                                         \
-	    break;                                                          \
-	}                                                                   \
-    if (!failed)                                                            \
-	printk("passed\n");                                                 \
-}
-
-void printk(const char *fmt, ...)
-{
-    va_list argptr;
-    va_start(argptr, fmt);
-    vfprintf(stdout, fmt, argptr);
-    fflush(stdout);
-    va_end(argptr);
-}
-
-char * print_flags(char *buf,ulong flags)
-{
-    char *separator = "";
-
-    buf[0] = 0;
-    if (flags & F_CF) {
-	strcat(buf,separator);
-	strcat(buf,"CF");
-	separator = ",";
-	}
-    if (flags & F_PF) {
-	strcat(buf,separator);
-	strcat(buf,"PF");
-	separator = ",";
-	}
-    if (flags & F_AF) {
-	strcat(buf,separator);
-	strcat(buf,"AF");
-	separator = ",";
-	}
-    if (flags & F_ZF) {
-	strcat(buf,separator);
-	strcat(buf,"ZF");
-	separator = ",";
-	}
-    if (flags & F_SF) {
-	strcat(buf,separator);
-	strcat(buf,"SF");
-	separator = ",";
-	}
-    if (flags & F_OF) {
-	strcat(buf,separator);
-	strcat(buf,"OF");
-	separator = ",";
-	}
-    if (separator[0] == 0)
-	strcpy(buf,"None");
-    return buf;
-}
-
-int main(int argc)
-{
-    ulong   def_flags;
-    int trace = false;
-
-    if (argc > 1)
-	trace = true;
-    memset(&M, 0, sizeof(M));
-    def_flags = get_flags_asm() & ~ALL_FLAGS;
-
-    VAL_WORD_UNARY(aaa_word);
-    VAL_WORD_UNARY(aas_word);
-
-    VAL_WORD_UNARY(aad_word);
-    VAL_WORD_UNARY(aam_word);
-
-    VAL_BYTE_BYTE_BINARY(adc_byte);
-    VAL_WORD_WORD_BINARY(adc_word);
-    VAL_LONG_LONG_BINARY(adc_long);
-
-    VAL_BYTE_BYTE_BINARY(add_byte);
-    VAL_WORD_WORD_BINARY(add_word);
-    VAL_LONG_LONG_BINARY(add_long);
-
-    VAL_BYTE_BYTE_BINARY(and_byte);
-    VAL_WORD_WORD_BINARY(and_word);
-    VAL_LONG_LONG_BINARY(and_long);
-
-    VAL_BYTE_BYTE_BINARY(cmp_byte);
-    VAL_WORD_WORD_BINARY(cmp_word);
-    VAL_LONG_LONG_BINARY(cmp_long);
-
-    VAL_BYTE_UNARY(daa_byte);
-    VAL_BYTE_UNARY(das_byte);   /* Fails for 0x9A (out of range anyway) */
-
-    VAL_BYTE_UNARY(dec_byte);
-    VAL_WORD_UNARY(dec_word);
-    VAL_LONG_UNARY(dec_long);
-
-    VAL_BYTE_UNARY(inc_byte);
-    VAL_WORD_UNARY(inc_word);
-    VAL_LONG_UNARY(inc_long);
-
-    VAL_BYTE_BYTE_BINARY(or_byte);
-    VAL_WORD_WORD_BINARY(or_word);
-    VAL_LONG_LONG_BINARY(or_long);
-
-    VAL_BYTE_UNARY(neg_byte);
-    VAL_WORD_UNARY(neg_word);
-    VAL_LONG_UNARY(neg_long);
-
-    VAL_BYTE_UNARY(not_byte);
-    VAL_WORD_UNARY(not_word);
-    VAL_LONG_UNARY(not_long);
-
-    VAL_BYTE_ROTATE(rcl_byte);
-    VAL_WORD_ROTATE(rcl_word);
-    VAL_LONG_ROTATE(rcl_long);
-
-    VAL_BYTE_ROTATE(rcr_byte);
-    VAL_WORD_ROTATE(rcr_word);
-    VAL_LONG_ROTATE(rcr_long);
-
-    VAL_BYTE_ROTATE(rol_byte);
-    VAL_WORD_ROTATE(rol_word);
-    VAL_LONG_ROTATE(rol_long);
-
-    VAL_BYTE_ROTATE(ror_byte);
-    VAL_WORD_ROTATE(ror_word);
-    VAL_LONG_ROTATE(ror_long);
-
-    VAL_BYTE_ROTATE(shl_byte);
-    VAL_WORD_ROTATE(shl_word);
-    VAL_LONG_ROTATE(shl_long);
-
-    VAL_BYTE_ROTATE(shr_byte);
-    VAL_WORD_ROTATE(shr_word);
-    VAL_LONG_ROTATE(shr_long);
-
-    VAL_BYTE_ROTATE(sar_byte);
-    VAL_WORD_ROTATE(sar_word);
-    VAL_LONG_ROTATE(sar_long);
-
-    VAL_WORD_ROTATE_DBL(shld_word);
-    VAL_LONG_ROTATE_DBL(shld_long);
-
-    VAL_WORD_ROTATE_DBL(shrd_word);
-    VAL_LONG_ROTATE_DBL(shrd_long);
-
-    VAL_BYTE_BYTE_BINARY(sbb_byte);
-    VAL_WORD_WORD_BINARY(sbb_word);
-    VAL_LONG_LONG_BINARY(sbb_long);
-
-    VAL_BYTE_BYTE_BINARY(sub_byte);
-    VAL_WORD_WORD_BINARY(sub_word);
-    VAL_LONG_LONG_BINARY(sub_long);
-
-    VAL_BYTE_BYTE_BINARY(xor_byte);
-    VAL_WORD_WORD_BINARY(xor_word);
-    VAL_LONG_LONG_BINARY(xor_long);
-
-    VAL_VOID_BYTE_BINARY(test_byte);
-    VAL_VOID_WORD_BINARY(test_word);
-    VAL_VOID_LONG_BINARY(test_long);
-
-    VAL_BYTE_MUL(imul_byte);
-    VAL_WORD_MUL(imul_word);
-    VAL_LONG_MUL(imul_long);
-
-    VAL_BYTE_MUL(mul_byte);
-    VAL_WORD_MUL(mul_word);
-    VAL_LONG_MUL(mul_long);
-
-    VAL_BYTE_DIV(idiv_byte);
-    VAL_WORD_DIV(idiv_word);
-    VAL_LONG_DIV(idiv_long);
-
-    VAL_BYTE_DIV(div_byte);
-    VAL_WORD_DIV(div_word);
-    VAL_LONG_DIV(div_long);
-
-    return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h
deleted file mode 100644
index 9a4a096c65..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for debug definitions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_DEBUG_H
-#define __X86EMU_DEBUG_H
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* checks to be enabled for "runtime" */
-
-#define CHECK_IP_FETCH_F                0x1
-#define CHECK_SP_ACCESS_F               0x2
-#define CHECK_MEM_ACCESS_F              0x4 /*using regular linear pointer */
-#define CHECK_DATA_ACCESS_F             0x8 /*using segment:offset*/
-
-#ifdef DEBUG
-# define CHECK_IP_FETCH()              	(M.x86.check & CHECK_IP_FETCH_F)
-# define CHECK_SP_ACCESS()             	(M.x86.check & CHECK_SP_ACCESS_F)
-# define CHECK_MEM_ACCESS()            	(M.x86.check & CHECK_MEM_ACCESS_F)
-# define CHECK_DATA_ACCESS()           	(M.x86.check & CHECK_DATA_ACCESS_F)
-#else
-# define CHECK_IP_FETCH()
-# define CHECK_SP_ACCESS()
-# define CHECK_MEM_ACCESS()
-# define CHECK_DATA_ACCESS()
-#endif
-
-#ifdef DEBUG
-# define DEBUG_INSTRUMENT()    	(M.x86.debug & DEBUG_INSTRUMENT_F)
-# define DEBUG_DECODE()        	(M.x86.debug & DEBUG_DECODE_F)
-# define DEBUG_TRACE()         	(M.x86.debug & DEBUG_TRACE_F)
-# define DEBUG_STEP()          	(M.x86.debug & DEBUG_STEP_F)
-# define DEBUG_DISASSEMBLE()   	(M.x86.debug & DEBUG_DISASSEMBLE_F)
-# define DEBUG_BREAK()         	(M.x86.debug & DEBUG_BREAK_F)
-# define DEBUG_SVC()           	(M.x86.debug & DEBUG_SVC_F)
-# define DEBUG_SAVE_IP_CS()     (M.x86.debug & DEBUG_SAVE_CS_IP)
-
-# define DEBUG_FS()            	(M.x86.debug & DEBUG_FS_F)
-# define DEBUG_PROC()          	(M.x86.debug & DEBUG_PROC_F)
-# define DEBUG_SYSINT()        	(M.x86.debug & DEBUG_SYSINT_F)
-# define DEBUG_TRACECALL()     	(M.x86.debug & DEBUG_TRACECALL_F)
-# define DEBUG_TRACECALLREGS() 	(M.x86.debug & DEBUG_TRACECALL_REGS_F)
-# define DEBUG_SYS()           	(M.x86.debug & DEBUG_SYS_F)
-# define DEBUG_MEM_TRACE()     	(M.x86.debug & DEBUG_MEM_TRACE_F)
-# define DEBUG_IO_TRACE()      	(M.x86.debug & DEBUG_IO_TRACE_F)
-# define DEBUG_DECODE_NOPRINT() (M.x86.debug & DEBUG_DECODE_NOPRINT_F)
-#else
-# define DEBUG_INSTRUMENT()    	0
-# define DEBUG_DECODE()        	0
-# define DEBUG_TRACE()         	0
-# define DEBUG_STEP()          	0
-# define DEBUG_DISASSEMBLE()   	0
-# define DEBUG_BREAK()         	0
-# define DEBUG_SVC()           	0
-# define DEBUG_SAVE_IP_CS()     0
-# define DEBUG_FS()            	0
-# define DEBUG_PROC()          	0
-# define DEBUG_SYSINT()        	0
-# define DEBUG_TRACECALL()     	0
-# define DEBUG_TRACECALLREGS() 	0
-# define DEBUG_SYS()           	0
-# define DEBUG_MEM_TRACE()     	0
-# define DEBUG_IO_TRACE()      	0
-# define DEBUG_DECODE_NOPRINT() 0
-#endif
-
-#ifdef DEBUG
-
-# define DECODE_PRINTF(x)     	if (DEBUG_DECODE()) \
-									x86emu_decode_printf(x)
-# define DECODE_PRINTF2(x,y)  	if (DEBUG_DECODE()) \
-									x86emu_decode_printf2(x,y)
-
-/*
- * The following allow us to look at the bytes of an instruction.  The
- * first INCR_INSTRN_LEN, is called everytime bytes are consumed in
- * the decoding process.  The SAVE_IP_CS is called initially when the
- * major opcode of the instruction is accessed.
- */
-#define INC_DECODED_INST_LEN(x)                    	\
-	if (DEBUG_DECODE())  	                       	\
-		x86emu_inc_decoded_inst_len(x)
-
-#define SAVE_IP_CS(x,y)                               			\
-	if (DEBUG_DECODE() | DEBUG_TRACECALL() | DEBUG_BREAK() \
-	      | DEBUG_IO_TRACE() | DEBUG_SAVE_IP_CS()) { \
-		M.x86.saved_cs = x;                          			\
-		M.x86.saved_ip = y;                          			\
-	}
-#else
-# define INC_DECODED_INST_LEN(x)
-# define DECODE_PRINTF(x)
-# define DECODE_PRINTF2(x,y)
-# define SAVE_IP_CS(x,y)
-#endif
-
-#ifdef DEBUG
-#define TRACE_REGS()                                   		\
-	if (DEBUG_DISASSEMBLE()) {                         		\
-		x86emu_just_disassemble();                        	\
-		goto EndOfTheInstructionProcedure;             		\
-	}                                                   	\
-	if (DEBUG_TRACE() || DEBUG_DECODE()) X86EMU_trace_regs()
-#else
-# define TRACE_REGS()
-#endif
-
-#ifdef DEBUG
-# define SINGLE_STEP()		if (DEBUG_STEP()) x86emu_single_step()
-#else
-# define SINGLE_STEP()
-#endif
-
-#define TRACE_AND_STEP()	\
-	TRACE_REGS();			\
-	SINGLE_STEP()
-
-#ifdef DEBUG
-# define START_OF_INSTR()
-# define END_OF_INSTR()		EndOfTheInstructionProcedure: x86emu_end_instr();
-# define END_OF_INSTR_NO_TRACE()	x86emu_end_instr();
-#else
-# define START_OF_INSTR()
-# define END_OF_INSTR()
-# define END_OF_INSTR_NO_TRACE()
-#endif
-
-#ifdef DEBUG
-# define  CALL_TRACE(u,v,w,x,s)                                 \
-	if (DEBUG_TRACECALLREGS())									\
-		x86emu_dump_regs();                                     \
-	if (DEBUG_TRACECALL())                                     	\
-		printk("%04x:%04x: CALL %s%04x:%04x\n", u , v, s, w, x);
-# define RETURN_TRACE(n,u,v)                                    \
-	if (DEBUG_TRACECALLREGS())									\
-		x86emu_dump_regs();                                     \
-	if (DEBUG_TRACECALL())                                     	\
-		printk("%04x:%04x: %s\n",u,v,n);
-#else
-# define CALL_TRACE(u,v,w,x,s)
-# define RETURN_TRACE(n,u,v)
-#endif
-
-#ifdef DEBUG
-#define	DB(x)	x
-#else
-#define	DB(x)
-#endif
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-extern void x86emu_inc_decoded_inst_len (int x);
-extern void x86emu_decode_printf (char *x);
-extern void x86emu_decode_printf2 (char *x, int y);
-extern void x86emu_just_disassemble (void);
-extern void x86emu_single_step (void);
-extern void x86emu_end_instr (void);
-extern void x86emu_dump_regs (void);
-extern void x86emu_dump_xregs (void);
-extern void x86emu_print_int_vect (u16 iv);
-extern void x86emu_instrument_instruction (void);
-extern void x86emu_check_ip_access (void);
-extern void x86emu_check_sp_access (void);
-extern void x86emu_check_mem_access (u32 p);
-extern void x86emu_check_data_access (uint s, uint o);
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_DEBUG_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h
deleted file mode 100644
index 321a345399..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for instruction decoding logic.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_DECODE_H
-#define __X86EMU_DECODE_H
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* Instruction Decoding Stuff */
-
-#define FETCH_DECODE_MODRM(mod,rh,rl) 	fetch_decode_modrm(&mod,&rh,&rl)
-#define DECODE_RM_BYTE_REGISTER(r)    	decode_rm_byte_register(r)
-#define DECODE_RM_WORD_REGISTER(r)    	decode_rm_word_register(r)
-#define DECODE_RM_LONG_REGISTER(r)    	decode_rm_long_register(r)
-#define DECODE_CLEAR_SEGOVR()         	M.x86.mode &= ~SYSMODE_CLRMASK
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-void 	x86emu_intr_raise (u8 type);
-void    fetch_decode_modrm (int *mod,int *regh,int *regl);
-u8      fetch_byte_imm (void);
-u16     fetch_word_imm (void);
-u32     fetch_long_imm (void);
-u8      fetch_data_byte (uint offset);
-u8      fetch_data_byte_abs (uint segment, uint offset);
-u16     fetch_data_word (uint offset);
-u16     fetch_data_word_abs (uint segment, uint offset);
-u32     fetch_data_long (uint offset);
-u32     fetch_data_long_abs (uint segment, uint offset);
-void    store_data_byte (uint offset, u8 val);
-void    store_data_byte_abs (uint segment, uint offset, u8 val);
-void    store_data_word (uint offset, u16 val);
-void    store_data_word_abs (uint segment, uint offset, u16 val);
-void    store_data_long (uint offset, u32 val);
-void    store_data_long_abs (uint segment, uint offset, u32 val);
-u8* 	decode_rm_byte_register(int reg);
-u16* 	decode_rm_word_register(int reg);
-u32* 	decode_rm_long_register(int reg);
-u16* 	decode_rm_seg_register(int reg);
-unsigned decode_rm00_address(int rm);
-unsigned decode_rm01_address(int rm);
-unsigned decode_rm10_address(int rm);
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_DECODE_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h
deleted file mode 100644
index 5fb271463b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for FPU instruction decoding.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_FPU_H
-#define __X86EMU_FPU_H
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-/* these have to be defined, whether 8087 support compiled in or not. */
-
-extern void x86emuOp_esc_coprocess_d8 (u8 op1);
-extern void x86emuOp_esc_coprocess_d9 (u8 op1);
-extern void x86emuOp_esc_coprocess_da (u8 op1);
-extern void x86emuOp_esc_coprocess_db (u8 op1);
-extern void x86emuOp_esc_coprocess_dc (u8 op1);
-extern void x86emuOp_esc_coprocess_dd (u8 op1);
-extern void x86emuOp_esc_coprocess_de (u8 op1);
-extern void x86emuOp_esc_coprocess_df (u8 op1);
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_FPU_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h
deleted file mode 100644
index 65ea676543..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for operand decoding functions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_OPS_H
-#define __X86EMU_OPS_H
-
-extern void (*x86emu_optab[0x100])(u8 op1);
-extern void (*x86emu_optab2[0x100])(u8 op2);
-
-#endif /* __X86EMU_OPS_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h
deleted file mode 100644
index e023cf88da..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h
+++ /dev/null
@@ -1,970 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		Watcom C++ 10.6 or later
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Inline assembler versions of the primitive operand
-*				functions for faster performance. At the moment this is
-*				x86 inline assembler, but these functions could be replaced
-*				with native inline assembler for each supported processor
-*				platform.
-*
-****************************************************************************/
-
-#ifndef	__X86EMU_PRIM_ASM_H
-#define	__X86EMU_PRIM_ASM_H
-
-#ifdef	__WATCOMC__
-
-#ifndef	VALIDATE
-#define	__HAVE_INLINE_ASSEMBLER__
-#endif
-
-u32		get_flags_asm(void);
-#pragma aux get_flags_asm =			\
-	"pushf"                         \
-	"pop	eax"                  	\
-	value [eax]                     \
-	modify exact [eax];
-
-u16     aaa_word_asm(u32 *flags,u16 d);
-#pragma aux aaa_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"aaa"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] 				\
-	value [ax]                      \
-	modify exact [ax];
-
-u16     aas_word_asm(u32 *flags,u16 d);
-#pragma aux aas_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"aas"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] 				\
-	value [ax]                      \
-	modify exact [ax];
-
-u16     aad_word_asm(u32 *flags,u16 d);
-#pragma aux aad_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"aad"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] 				\
-	value [ax]                      \
-	modify exact [ax];
-
-u16     aam_word_asm(u32 *flags,u8 d);
-#pragma aux aam_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"aam"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] 				\
-	value [ax]                      \
-	modify exact [ax];
-
-u8      adc_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux adc_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"adc	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     adc_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux adc_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"adc	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     adc_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux adc_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"adc	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      add_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux add_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"add	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     add_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux add_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"add	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     add_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux add_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"add	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      and_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux and_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"and	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     and_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux and_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"and	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     and_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux and_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"and	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      cmp_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux cmp_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"cmp	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     cmp_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux cmp_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"cmp	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     cmp_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux cmp_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"cmp	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      daa_byte_asm(u32 *flags,u8 d);
-#pragma aux daa_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"daa"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u8      das_byte_asm(u32 *flags,u8 d);
-#pragma aux das_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"das"                  			\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u8      dec_byte_asm(u32 *flags,u8 d);
-#pragma aux dec_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"dec	al"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u16     dec_word_asm(u32 *flags,u16 d);
-#pragma aux dec_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"dec	ax"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax]            		\
-	value [ax]                      \
-	modify exact [ax];
-
-u32     dec_long_asm(u32 *flags,u32 d);
-#pragma aux dec_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"dec	eax"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax]          		\
-	value [eax]                     \
-	modify exact [eax];
-
-u8      inc_byte_asm(u32 *flags,u8 d);
-#pragma aux inc_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"inc	al"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u16     inc_word_asm(u32 *flags,u16 d);
-#pragma aux inc_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"inc	ax"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax]            		\
-	value [ax]                      \
-	modify exact [ax];
-
-u32     inc_long_asm(u32 *flags,u32 d);
-#pragma aux inc_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"inc	eax"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax]          		\
-	value [eax]                     \
-	modify exact [eax];
-
-u8      or_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux or_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"or	al,bl"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     or_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux or_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"or	ax,bx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     or_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux or_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"or	eax,ebx"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      neg_byte_asm(u32 *flags,u8 d);
-#pragma aux neg_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"neg	al"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u16     neg_word_asm(u32 *flags,u16 d);
-#pragma aux neg_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"neg	ax"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax]            		\
-	value [ax]                      \
-	modify exact [ax];
-
-u32     neg_long_asm(u32 *flags,u32 d);
-#pragma aux neg_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"neg	eax"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax]          		\
-	value [eax]                     \
-	modify exact [eax];
-
-u8      not_byte_asm(u32 *flags,u8 d);
-#pragma aux not_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"not	al"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al]            		\
-	value [al]                      \
-	modify exact [al];
-
-u16     not_word_asm(u32 *flags,u16 d);
-#pragma aux not_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"not	ax"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax]            		\
-	value [ax]                      \
-	modify exact [ax];
-
-u32     not_long_asm(u32 *flags,u32 d);
-#pragma aux not_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"not	eax"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax]          		\
-	value [eax]                     \
-	modify exact [eax];
-
-u8      rcl_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rcl_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcl	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     rcl_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rcl_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcl	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     rcl_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rcl_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcl	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      rcr_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rcr_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcr	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     rcr_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rcr_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcr	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     rcr_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rcr_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rcr	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      rol_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rol_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rol	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     rol_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rol_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rol	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     rol_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rol_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"rol	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      ror_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux ror_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"ror	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     ror_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux ror_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"ror	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     ror_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux ror_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"ror	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      shl_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux shl_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shl	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     shl_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux shl_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shl	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     shl_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux shl_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shl	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      shr_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux shr_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shr	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     shr_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux shr_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shr	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     shr_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux shr_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shr	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u8      sar_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sar_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sar	al,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [cl]            \
-	value [al]                      \
-	modify exact [al cl];
-
-u16     sar_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux sar_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sar	ax,cl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [cl]            \
-	value [ax]                      \
-	modify exact [ax cl];
-
-u32     sar_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux sar_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sar	eax,cl"                	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [cl]          	\
-	value [eax]                     \
-	modify exact [eax cl];
-
-u16		shld_word_asm(u32 *flags,u16 d, u16 fill, u8 s);
-#pragma aux shld_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shld	ax,dx,cl"               \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [dx] [cl]       \
-	value [ax]                      \
-	modify exact [ax dx cl];
-
-u32     shld_long_asm(u32 *flags,u32 d, u32 fill, u8 s);
-#pragma aux shld_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shld	eax,edx,cl"             \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [edx] [cl]     \
-	value [eax]                     \
-	modify exact [eax edx cl];
-
-u16		shrd_word_asm(u32 *flags,u16 d, u16 fill, u8 s);
-#pragma aux shrd_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shrd	ax,dx,cl"               \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [dx] [cl]       \
-	value [ax]                      \
-	modify exact [ax dx cl];
-
-u32     shrd_long_asm(u32 *flags,u32 d, u32 fill, u8 s);
-#pragma aux shrd_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"shrd	eax,edx,cl"             \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [edx] [cl]     \
-	value [eax]                     \
-	modify exact [eax edx cl];
-
-u8      sbb_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sbb_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sbb	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     sbb_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux sbb_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sbb	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     sbb_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux sbb_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sbb	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-u8      sub_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sub_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sub	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     sub_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux sub_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sub	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     sub_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux sub_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"sub	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-void	test_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux test_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"test	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	modify exact [al bl];
-
-void	test_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux test_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"test	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	modify exact [ax bx];
-
-void	test_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux test_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"test	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	modify exact [eax ebx];
-
-u8      xor_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux xor_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"xor	al,bl"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [al] [bl]            \
-	value [al]                      \
-	modify exact [al bl];
-
-u16     xor_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux xor_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"xor	ax,bx"                  \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [ax] [bx]            \
-	value [ax]                      \
-	modify exact [ax bx];
-
-u32     xor_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux xor_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"xor	eax,ebx"                \
-	"pushf"                         \
-	"pop	[edi]"            		\
-	parm [edi] [eax] [ebx]          \
-	value [eax]                     \
-	modify exact [eax ebx];
-
-void    imul_byte_asm(u32 *flags,u16 *ax,u8 d,u8 s);
-#pragma aux imul_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"imul	bl"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	parm [edi] [esi] [al] [bl]      \
-	modify exact [esi ax bl];
-
-void    imul_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 d,u16 s);
-#pragma aux imul_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"imul	bx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	"mov	[ecx],dx"				\
-	parm [edi] [esi] [ecx] [ax] [bx]\
-	modify exact [esi edi ax bx dx];
-
-void    imul_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 d,u32 s);
-#pragma aux imul_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"imul	ebx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],eax"				\
-	"mov	[ecx],edx"				\
-	parm [edi] [esi] [ecx] [eax] [ebx] \
-	modify exact [esi edi eax ebx edx];
-
-void    mul_byte_asm(u32 *flags,u16 *ax,u8 d,u8 s);
-#pragma aux mul_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"mul	bl"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	parm [edi] [esi] [al] [bl]      \
-	modify exact [esi ax bl];
-
-void    mul_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 d,u16 s);
-#pragma aux mul_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"mul	bx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	"mov	[ecx],dx"				\
-	parm [edi] [esi] [ecx] [ax] [bx]\
-	modify exact [esi edi ax bx dx];
-
-void    mul_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 d,u32 s);
-#pragma aux mul_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"mul	ebx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],eax"				\
-	"mov	[ecx],edx"				\
-	parm [edi] [esi] [ecx] [eax] [ebx] \
-	modify exact [esi edi eax ebx edx];
-
-void	idiv_byte_asm(u32 *flags,u8 *al,u8 *ah,u16 d,u8 s);
-#pragma aux idiv_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"idiv	bl"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],al"				\
-	"mov	[ecx],ah"				\
-	parm [edi] [esi] [ecx] [ax] [bl]\
-	modify exact [esi edi ax bl];
-
-void	idiv_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 dlo,u16 dhi,u16 s);
-#pragma aux idiv_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"idiv	bx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	"mov	[ecx],dx"				\
-	parm [edi] [esi] [ecx] [ax] [dx] [bx]\
-	modify exact [esi edi ax dx bx];
-
-void	idiv_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 dlo,u32 dhi,u32 s);
-#pragma aux idiv_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"idiv	ebx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],eax"				\
-	"mov	[ecx],edx"				\
-	parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
-	modify exact [esi edi eax edx ebx];
-
-void	div_byte_asm(u32 *flags,u8 *al,u8 *ah,u16 d,u8 s);
-#pragma aux div_byte_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"div	bl"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],al"				\
-	"mov	[ecx],ah"				\
-	parm [edi] [esi] [ecx] [ax] [bl]\
-	modify exact [esi edi ax bl];
-
-void	div_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 dlo,u16 dhi,u16 s);
-#pragma aux div_word_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"div	bx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],ax"				\
-	"mov	[ecx],dx"				\
-	parm [edi] [esi] [ecx] [ax] [dx] [bx]\
-	modify exact [esi edi ax dx bx];
-
-void	div_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 dlo,u32 dhi,u32 s);
-#pragma aux div_long_asm =			\
-	"push	[edi]"            		\
-	"popf"                         	\
-	"div	ebx"                  	\
-	"pushf"                         \
-	"pop	[edi]"            		\
-	"mov	[esi],eax"				\
-	"mov	[ecx],edx"				\
-	parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
-	modify exact [esi edi eax edx ebx];
-
-#endif
-
-#endif /* __X86EMU_PRIM_ASM_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h
deleted file mode 100644
index 1633fe1fae..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for primitive operation functions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_PRIM_OPS_H
-#define __X86EMU_PRIM_OPS_H
-
-#include "x86emu/prim_asm.h"
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-u16     aaa_word (u16 d);
-u16     aas_word (u16 d);
-u16     aad_word (u16 d);
-u16     aam_word (u8 d);
-u8      adc_byte (u8 d, u8 s);
-u16     adc_word (u16 d, u16 s);
-u32     adc_long (u32 d, u32 s);
-u8      add_byte (u8 d, u8 s);
-u16     add_word (u16 d, u16 s);
-u32     add_long (u32 d, u32 s);
-u8      and_byte (u8 d, u8 s);
-u16     and_word (u16 d, u16 s);
-u32     and_long (u32 d, u32 s);
-u8      cmp_byte (u8 d, u8 s);
-u16     cmp_word (u16 d, u16 s);
-u32     cmp_long (u32 d, u32 s);
-u8      daa_byte (u8 d);
-u8      das_byte (u8 d);
-u8      dec_byte (u8 d);
-u16     dec_word (u16 d);
-u32     dec_long (u32 d);
-u8      inc_byte (u8 d);
-u16     inc_word (u16 d);
-u32     inc_long (u32 d);
-u8      or_byte (u8 d, u8 s);
-u16     or_word (u16 d, u16 s);
-u32     or_long (u32 d, u32 s);
-u8      neg_byte (u8 s);
-u16     neg_word (u16 s);
-u32     neg_long (u32 s);
-u8      not_byte (u8 s);
-u16     not_word (u16 s);
-u32     not_long (u32 s);
-u8      rcl_byte (u8 d, u8 s);
-u16     rcl_word (u16 d, u8 s);
-u32     rcl_long (u32 d, u8 s);
-u8      rcr_byte (u8 d, u8 s);
-u16     rcr_word (u16 d, u8 s);
-u32     rcr_long (u32 d, u8 s);
-u8      rol_byte (u8 d, u8 s);
-u16     rol_word (u16 d, u8 s);
-u32     rol_long (u32 d, u8 s);
-u8      ror_byte (u8 d, u8 s);
-u16     ror_word (u16 d, u8 s);
-u32     ror_long (u32 d, u8 s);
-u8      shl_byte (u8 d, u8 s);
-u16     shl_word (u16 d, u8 s);
-u32     shl_long (u32 d, u8 s);
-u8      shr_byte (u8 d, u8 s);
-u16     shr_word (u16 d, u8 s);
-u32     shr_long (u32 d, u8 s);
-u8      sar_byte (u8 d, u8 s);
-u16     sar_word (u16 d, u8 s);
-u32     sar_long (u32 d, u8 s);
-u16     shld_word (u16 d, u16 fill, u8 s);
-u32     shld_long (u32 d, u32 fill, u8 s);
-u16     shrd_word (u16 d, u16 fill, u8 s);
-u32     shrd_long (u32 d, u32 fill, u8 s);
-u8      sbb_byte (u8 d, u8 s);
-u16     sbb_word (u16 d, u16 s);
-u32     sbb_long (u32 d, u32 s);
-u8      sub_byte (u8 d, u8 s);
-u16     sub_word (u16 d, u16 s);
-u32     sub_long (u32 d, u32 s);
-void    test_byte (u8 d, u8 s);
-void    test_word (u16 d, u16 s);
-void    test_long (u32 d, u32 s);
-u8      xor_byte (u8 d, u8 s);
-u16     xor_word (u16 d, u16 s);
-u32     xor_long (u32 d, u32 s);
-void    imul_byte (u8 s);
-void    imul_word (u16 s);
-void    imul_long (u32 s);
-void 	imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s);
-void    mul_byte (u8 s);
-void    mul_word (u16 s);
-void    mul_long (u32 s);
-void    idiv_byte (u8 s);
-void    idiv_word (u16 s);
-void    idiv_long (u32 s);
-void    div_byte (u8 s);
-void    div_word (u16 s);
-void    div_long (u32 s);
-void    ins (int size);
-void    outs (int size);
-u16     mem_access_word (int addr);
-void    push_word (u16 w);
-void    push_long (u32 w);
-u16     pop_word (void);
-u32		pop_long (void);
-
-#if  defined(__HAVE_INLINE_ASSEMBLER__) && !defined(PRIM_OPS_NO_REDEFINE_ASM)
-
-#define	aaa_word(d)		aaa_word_asm(&M.x86.R_EFLG,d)
-#define aas_word(d)		aas_word_asm(&M.x86.R_EFLG,d)
-#define aad_word(d)		aad_word_asm(&M.x86.R_EFLG,d)
-#define aam_word(d)		aam_word_asm(&M.x86.R_EFLG,d)
-#define adc_byte(d,s)	adc_byte_asm(&M.x86.R_EFLG,d,s)
-#define adc_word(d,s)	adc_word_asm(&M.x86.R_EFLG,d,s)
-#define adc_long(d,s)	adc_long_asm(&M.x86.R_EFLG,d,s)
-#define add_byte(d,s) 	add_byte_asm(&M.x86.R_EFLG,d,s)
-#define add_word(d,s)	add_word_asm(&M.x86.R_EFLG,d,s)
-#define add_long(d,s)	add_long_asm(&M.x86.R_EFLG,d,s)
-#define and_byte(d,s)	and_byte_asm(&M.x86.R_EFLG,d,s)
-#define and_word(d,s)	and_word_asm(&M.x86.R_EFLG,d,s)
-#define and_long(d,s)	and_long_asm(&M.x86.R_EFLG,d,s)
-#define cmp_byte(d,s)	cmp_byte_asm(&M.x86.R_EFLG,d,s)
-#define cmp_word(d,s)	cmp_word_asm(&M.x86.R_EFLG,d,s)
-#define cmp_long(d,s)	cmp_long_asm(&M.x86.R_EFLG,d,s)
-#define daa_byte(d)		daa_byte_asm(&M.x86.R_EFLG,d)
-#define das_byte(d)		das_byte_asm(&M.x86.R_EFLG,d)
-#define dec_byte(d)		dec_byte_asm(&M.x86.R_EFLG,d)
-#define dec_word(d)		dec_word_asm(&M.x86.R_EFLG,d)
-#define dec_long(d)		dec_long_asm(&M.x86.R_EFLG,d)
-#define inc_byte(d)		inc_byte_asm(&M.x86.R_EFLG,d)
-#define inc_word(d)		inc_word_asm(&M.x86.R_EFLG,d)
-#define inc_long(d)		inc_long_asm(&M.x86.R_EFLG,d)
-#define or_byte(d,s)	or_byte_asm(&M.x86.R_EFLG,d,s)
-#define or_word(d,s)	or_word_asm(&M.x86.R_EFLG,d,s)
-#define or_long(d,s)	or_long_asm(&M.x86.R_EFLG,d,s)
-#define neg_byte(s)		neg_byte_asm(&M.x86.R_EFLG,s)
-#define neg_word(s)		neg_word_asm(&M.x86.R_EFLG,s)
-#define neg_long(s)		neg_long_asm(&M.x86.R_EFLG,s)
-#define not_byte(s)		not_byte_asm(&M.x86.R_EFLG,s)
-#define not_word(s)		not_word_asm(&M.x86.R_EFLG,s)
-#define not_long(s)		not_long_asm(&M.x86.R_EFLG,s)
-#define rcl_byte(d,s)	rcl_byte_asm(&M.x86.R_EFLG,d,s)
-#define rcl_word(d,s)	rcl_word_asm(&M.x86.R_EFLG,d,s)
-#define rcl_long(d,s)	rcl_long_asm(&M.x86.R_EFLG,d,s)
-#define rcr_byte(d,s)	rcr_byte_asm(&M.x86.R_EFLG,d,s)
-#define rcr_word(d,s)	rcr_word_asm(&M.x86.R_EFLG,d,s)
-#define rcr_long(d,s)	rcr_long_asm(&M.x86.R_EFLG,d,s)
-#define rol_byte(d,s)	rol_byte_asm(&M.x86.R_EFLG,d,s)
-#define rol_word(d,s)	rol_word_asm(&M.x86.R_EFLG,d,s)
-#define rol_long(d,s)	rol_long_asm(&M.x86.R_EFLG,d,s)
-#define ror_byte(d,s)	ror_byte_asm(&M.x86.R_EFLG,d,s)
-#define ror_word(d,s)	ror_word_asm(&M.x86.R_EFLG,d,s)
-#define ror_long(d,s)	ror_long_asm(&M.x86.R_EFLG,d,s)
-#define shl_byte(d,s)	shl_byte_asm(&M.x86.R_EFLG,d,s)
-#define shl_word(d,s)	shl_word_asm(&M.x86.R_EFLG,d,s)
-#define shl_long(d,s)	shl_long_asm(&M.x86.R_EFLG,d,s)
-#define shr_byte(d,s)	shr_byte_asm(&M.x86.R_EFLG,d,s)
-#define shr_word(d,s)	shr_word_asm(&M.x86.R_EFLG,d,s)
-#define shr_long(d,s)	shr_long_asm(&M.x86.R_EFLG,d,s)
-#define sar_byte(d,s)	sar_byte_asm(&M.x86.R_EFLG,d,s)
-#define sar_word(d,s)	sar_word_asm(&M.x86.R_EFLG,d,s)
-#define sar_long(d,s)	sar_long_asm(&M.x86.R_EFLG,d,s)
-#define shld_word(d,fill,s)	shld_word_asm(&M.x86.R_EFLG,d,fill,s)
-#define shld_long(d,fill,s)	shld_long_asm(&M.x86.R_EFLG,d,fill,s)
-#define shrd_word(d,fill,s)	shrd_word_asm(&M.x86.R_EFLG,d,fill,s)
-#define shrd_long(d,fill,s)	shrd_long_asm(&M.x86.R_EFLG,d,fill,s)
-#define sbb_byte(d,s)	sbb_byte_asm(&M.x86.R_EFLG,d,s)
-#define sbb_word(d,s)	sbb_word_asm(&M.x86.R_EFLG,d,s)
-#define sbb_long(d,s)	sbb_long_asm(&M.x86.R_EFLG,d,s)
-#define sub_byte(d,s)	sub_byte_asm(&M.x86.R_EFLG,d,s)
-#define sub_word(d,s)	sub_word_asm(&M.x86.R_EFLG,d,s)
-#define sub_long(d,s)	sub_long_asm(&M.x86.R_EFLG,d,s)
-#define test_byte(d,s)	test_byte_asm(&M.x86.R_EFLG,d,s)
-#define test_word(d,s)	test_word_asm(&M.x86.R_EFLG,d,s)
-#define test_long(d,s)	test_long_asm(&M.x86.R_EFLG,d,s)
-#define xor_byte(d,s)	xor_byte_asm(&M.x86.R_EFLG,d,s)
-#define xor_word(d,s)	xor_word_asm(&M.x86.R_EFLG,d,s)
-#define xor_long(d,s)	xor_long_asm(&M.x86.R_EFLG,d,s)
-#define imul_byte(s)	imul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s)
-#define imul_word(s)	imul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s)
-#define imul_long(s)	imul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s)
-#define imul_long_direct(res_lo,res_hi,d,s)	imul_long_asm(&M.x86.R_EFLG,res_lo,res_hi,d,s)
-#define mul_byte(s)		mul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s)
-#define mul_word(s)		mul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s)
-#define mul_long(s)		mul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s)
-#define idiv_byte(s)	idiv_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s)
-#define idiv_word(s)	idiv_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s)
-#define idiv_long(s)	idiv_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s)
-#define div_byte(s)		div_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s)
-#define div_word(s)		div_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s)
-#define div_long(s)		div_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s)
-
-#endif
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_PRIM_OPS_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h
deleted file mode 100644
index bff49039e0..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for system specific functions. These functions
-*				are always compiled and linked in the OS depedent libraries,
-*				and never in a binary portable driver.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_X86EMUI_H
-#define __X86EMU_X86EMUI_H
-
-/* If we are compiling in C++ mode, we can compile some functions as
- * inline to increase performance (however the code size increases quite
- * dramatically in this case).
- */
-
-#if	defined(__cplusplus) && !defined(_NO_INLINE)
-#define	_INLINE	inline
-#else
-#define	_INLINE static
-#endif
-
-/* Get rid of unused parameters in C++ compilation mode */
-
-#ifdef __cplusplus
-#define	X86EMU_UNUSED(v)
-#else
-#define	X86EMU_UNUSED(v)	v
-#endif
-
-#include "x86emu.h"
-#include "x86emu/regs.h"
-#include "x86emu/debug.h"
-#include "x86emu/decode.h"
-#include "x86emu/ops.h"
-#include "x86emu/prim_ops.h"
-#include "x86emu/fpu.h"
-#include "x86emu/fpu_regs.h"
-#include <stdio.h>
-#include <string.h>
-
-/*--------------------------- Inline Functions ----------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-extern u8  	(X86APIP sys_rdb)(u32 addr);
-extern u16 	(X86APIP sys_rdw)(u32 addr);
-extern u32 	(X86APIP sys_rdl)(u32 addr);
-extern void (X86APIP sys_wrb)(u32 addr,u8 val);
-extern void (X86APIP sys_wrw)(u32 addr,u16 val);
-extern void (X86APIP sys_wrl)(u32 addr,u32 val);
-
-extern u8  	(X86APIP sys_inb)(X86EMU_pioAddr addr);
-extern u16 	(X86APIP sys_inw)(X86EMU_pioAddr addr);
-extern u32 	(X86APIP sys_inl)(X86EMU_pioAddr addr);
-extern void (X86APIP sys_outb)(X86EMU_pioAddr addr,u8 val);
-extern void (X86APIP sys_outw)(X86EMU_pioAddr addr,u16 val);
-extern void	(X86APIP sys_outl)(X86EMU_pioAddr addr,u32 val);
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_X86EMUI_H */
diff --git a/board/MAI/bios_emulator/x86interface.c b/board/MAI/bios_emulator/x86interface.c
deleted file mode 100644
index c46ff438f9..0000000000
--- a/board/MAI/bios_emulator/x86interface.c
+++ /dev/null
@@ -1,810 +0,0 @@
-#include "x86emu.h"
-#include "glue.h"
-
-
-/*
- * This isn't nice, but there are a lot of incompatibilities in the U-Boot and scitech include
- * files that this is the only really workable solution.
- * Might be cleaned out later.
- */
-
-#ifdef DEBUG
-#undef DEBUG
-#endif
-
-#undef IO_LOGGING
-#undef MEM_LOGGING
-
-#ifdef IO_LOGGING
-#define LOGIO(port, format, args...) if (dolog(port)) _printf(format , ## args)
-#else
-#define LOGIO(port, format, args...)
-#endif
-
-#ifdef MEM_LOGGIN
-#define LOGMEM(format, args...) _printf(format , ## args)
-#else
-#define LOGMEM(format, args...)
-#endif
-
-#ifdef DEBUG
-#define PRINTF(format, args...) _printf(format , ## args)
-#else
-#define PRINTF(format, argc...)
-#endif
-
-typedef unsigned char UBYTE;
-typedef unsigned short UWORD;
-typedef unsigned long ULONG;
-
-typedef char BYTE;
-typedef short WORT;
-typedef long LONG;
-
-#define EMULATOR_MEM_SIZE       (1024*1024)
-#define EMULATOR_BIOS_OFFSET    0xC0000
-#define EMULATOR_STRAP_OFFSET   0x30000
-#define EMULATOR_STACK_OFFSET   0x20000
-#define EMULATOR_LOGO_OFFSET    0x40000 /* If you change this, change the strap code, too */
-#define VIDEO_BASE (void *)0xFD0B8000
-
-extern char *getenv(char *);
-extern int tstc(void);
-extern int getc(void);
-extern unsigned char video_get_attr(void);
-
-int atoi(char *string)
-{
-    int res = 0;
-    while (*string>='0' && *string <='9')
-    {
-	res *= 10;
-	res += *string-'0';
-	string++;
-    }
-
-    return res;
-}
-
-void cons_gets(char *buffer)
-{
-    int i = 0;
-    char c = 0;
-
-    buffer[0] = 0;
-    if (getenv("x86_runthru")) return; /*FIXME: */
-    while (c != 0x0D && c != 0x0A)
-    {
-	while (!tstc());
-	c = getc();
-	if (c>=32 && c < 127)
-	{
-	    buffer[i] = c;
-	    i++;
-	    buffer[i] = 0;
-	    putc(c);
-	}
-	else
-	{
-	    if (c == 0x08)
-	    {
-		if (i>0) i--;
-		buffer[i] = 0;
-	    }
-	}
-    }
-    buffer[i] = '\n';
-    buffer[i+1] = 0;
-}
-
-char *bios_date = "08/14/02";
-UBYTE model = 0xFC;
-UBYTE submodel = 0x00;
-
-static inline UBYTE read_byte(volatile UBYTE* from)
-{
-    int x;
-    asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UBYTE)x;
-}
-
-static inline void write_byte(volatile UBYTE *to, int x)
-{
-    asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline UWORD read_word_little(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from));
-    return (UWORD)x;
-}
-
-static inline UWORD read_word_big(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UWORD)x;
-}
-
-static inline void write_word_little(volatile UWORD *to, int x)
-{
-    asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_word_big(volatile UWORD *to, int x)
-{
-    asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline ULONG read_long_little(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from));
-    return (ULONG)x;
-}
-
-static inline ULONG read_long_big(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (ULONG)x;
-}
-
-static inline void write_long_little(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_long_big(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static int log_init = 0;
-static int log_do = 0;
-static int log_low = 0;
-
-int dolog(int port)
-{
-    if (log_init && log_do)
-    {
-	if (log_low && port > 0x400) return 0;
-	return 1;
-    }
-
-    if (!log_init)
-    {
-	log_init = 1;
-	log_do = (getenv("x86_logio") != (char *)0);
-	log_low = (getenv("x86_loglow") != (char *)0);
-	if (log_do)
-	{
-	    if (log_low && port > 0x400) return 0;
-	    return 1;
-	}
-    }
-    return 0;
-}
-
-/* Converts an emulator address to a physical address. */
-/* Handles all special cases (bios date, model etc), and might need work */
-u32 memaddr(u32 addr)
-{
-/*    if (addr >= 0xF0000 && addr < 0xFFFFF) printf("WARNING: Segment F access (0x%x)\n", addr); */
-/*    printf("MemAddr=%p\n", addr); */
-    if (addr >= 0xA0000 && addr < 0xC0000)
-	return 0xFD000000 + addr;
-    else if (addr >= 0xFFFF5 && addr < 0xFFFFE)
-    {
-	return (u32)bios_date+addr-0xFFFF5;
-    }
-    else if (addr == 0xFFFFE)
-	return (u32)&model;
-    else if (addr == 0xFFFFF)
-	return (u32)&submodel;
-    else if (addr >= 0x80000000)
-    {
-	/*printf("Warning: High memory access at 0x%x\n", addr); */
-	return addr;
-    }
-    else
-	return (u32)M.mem_base+addr;
-}
-
-u8 A1_rdb(u32 addr)
-{
-    u8 a = read_byte((UBYTE *)memaddr(addr));
-    LOGMEM("rdb: %x -> %x\n", addr, a);
-    return a;
-}
-
-u16 A1_rdw(u32 addr)
-{
-    u16 a = read_word_little((UWORD *)memaddr(addr));
-    LOGMEM("rdw: %x -> %x\n", addr, a);
-    return a;
-}
-
-u32 A1_rdl(u32 addr)
-{
-    u32 a = read_long_little((ULONG *)memaddr(addr));
-    LOGMEM("rdl: %x -> %x\n", addr, a);
-    return a;
-}
-
-void A1_wrb(u32 addr, u8 val)
-{
-    LOGMEM("wrb: %x <- %x\n", addr, val);
-    write_byte((UBYTE *)memaddr(addr), val);
-}
-
-void A1_wrw(u32 addr, u16 val)
-{
-    LOGMEM("wrw: %x <- %x\n", addr, val);
-    write_word_little((UWORD *)memaddr(addr), val);
-}
-
-void A1_wrl(u32 addr, u32 val)
-{
-    LOGMEM("wrl: %x <- %x\n", addr, val);
-    write_long_little((ULONG *)memaddr(addr), val);
-}
-
-X86EMU_memFuncs _A1_mem =
-{
-    A1_rdb,
-    A1_rdw,
-    A1_rdl,
-    A1_wrb,
-    A1_wrw,
-    A1_wrl,
-};
-
-#define ARTICIAS_PCI_CFGADDR  0xfec00cf8
-#define ARTICIAS_PCI_CFGDATA  0xfee00cfc
-#define IOBASE                0xFE000000
-
-#define in_byte(from) read_byte( (UBYTE *)port_to_mem(from))
-#define in_word(from) read_word_little((UWORD *)port_to_mem(from))
-#define in_long(from) read_long_little((ULONG *)port_to_mem(from))
-#define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val)
-#define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val)
-#define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val)
-
-u32 port_to_mem(int port)
-{
-    if (port >= 0xCFC && port <= 0xCFF) return 0xFEE00000+port;
-    else if (port >= 0xCF8 && port <= 0xCFB) return 0xFEC00000+port;
-    else return IOBASE + port;
-}
-
-u8 A1_inb(int port)
-{
-    u8 a;
-    /*if (port == 0x3BA) return 0; */
-    a = in_byte(port);
-    LOGIO(port, "inb: %Xh -> %d (%Xh)\n", port, a, a);
-    return a;
-}
-
-u16 A1_inw(int port)
-{
-    u16 a = in_word(port);
-    LOGIO(port, "inw: %Xh -> %d (%Xh)\n", port, a, a);
-    return a;
-}
-
-u32 A1_inl(int port)
-{
-    u32 a = in_long(port);
-    LOGIO(port, "inl: %Xh -> %d (%Xh)\n", port, a, a);
-    return a;
-}
-
-void A1_outb(int port, u8 val)
-{
-    LOGIO(port, "outb: %Xh <- %d (%Xh)\n", port, val, val);
-/*    if (port == 0xCF8) port = 0xCFB;
-    else if (port == 0xCF9) port = 0xCFA;
-    else if (port == 0xCFA) port = 0xCF9;
-    else if (port == 0xCFB) port = 0xCF8;*/
-    out_byte(port, val);
-}
-
-void A1_outw(int port, u16 val)
-{
-    LOGIO(port, "outw: %Xh <- %d (%Xh)\n", port, val, val);
-    out_word(port, val);
-}
-
-void A1_outl(int port, u32 val)
-{
-    LOGIO(port, "outl: %Xh <- %d (%Xh)\n", port, val, val);
-    out_long(port, val);
-}
-
-X86EMU_pioFuncs _A1_pio =
-{
-    A1_inb,
-    A1_inw,
-    A1_inl,
-    A1_outb,
-    A1_outw,
-    A1_outl,
-};
-
-static int reloced_ops = 0;
-
-void reloc_ops(void *reloc_addr)
-{
-    extern void (*x86emu_optab[256])(u8);
-    extern void (*x86emu_optab2[256])(u8);
-    extern void tables_relocate(unsigned int offset);
-    int i;
-    unsigned long delta;
-    if (reloced_ops == 1) return;
-    reloced_ops = 1;
-
-    delta = TEXT_BASE - (unsigned long)reloc_addr;
-
-    for (i=0; i<256; i++)
-    {
-	x86emu_optab[i] -= delta;
-	x86emu_optab2[i] -= delta;
-    }
-
-    _A1_mem.rdb = A1_rdb;
-    _A1_mem.rdw = A1_rdw;
-    _A1_mem.rdl = A1_rdl;
-    _A1_mem.wrb = A1_wrb;
-    _A1_mem.wrw = A1_wrw;
-    _A1_mem.wrl = A1_wrl;
-
-    _A1_pio.inb = A1_inb;
-    _A1_pio.inw = A1_inw;
-    _A1_pio.inl = A1_inl;
-    _A1_pio.outb = A1_outb;
-    _A1_pio.outw = A1_outw;
-    _A1_pio.outl = A1_outl;
-
-    tables_relocate(delta);
-
-}
-
-
-#define ANY_KEY(text)				\
-    printf(text);				\
-    while (!tstc());
-
-
-unsigned char more_strap[] = {
-	0xb4, 0x0, 0xb0, 0x2, 0xcd, 0x10,
-};
-#define MORE_STRAP_BYTES 6 /* Additional bytes of strap code */
-
-
-unsigned char *done_msg="VGA Initialized\0";
-
-int execute_bios(pci_dev_t gr_dev, void *reloc_addr)
-{
-    extern void bios_init(void);
-    extern void remove_init_data(void);
-    extern int video_rows(void);
-    extern int video_cols(void);
-    extern int video_size(int, int);
-    u8 *strap;
-    unsigned char *logo;
-    u8 cfg;
-    int i;
-    char c;
-    char *s;
-#ifdef EASTEREGG
-    int easteregg_active = 0;
-#endif
-    char *pal_reset;
-    u8 *fb;
-    unsigned char *msg;
-    unsigned char current_attr;
-
-    PRINTF("Trying to remove init data\n");
-    remove_init_data();
-    PRINTF("Removed init data from cache, now in RAM\n");
-
-    reloc_ops(reloc_addr);
-    PRINTF("Attempting to run emulator on %02x:%02x:%02x\n",
-	   PCI_BUS(gr_dev), PCI_DEV(gr_dev), PCI_FUNC(gr_dev));
-
-    /* Enable compatibility hole for emulator access to frame buffer */
-    PRINTF("Enabling compatibility hole\n");
-    enable_compatibility_hole();
-
-    /* Allocate memory */
-    /* FIXME: We shouldn't use this much memory really. */
-    memset(&M, 0, sizeof(X86EMU_sysEnv));
-    M.mem_base = malloc(EMULATOR_MEM_SIZE);
-    M.mem_size = EMULATOR_MEM_SIZE;
-
-    if (!M.mem_base)
-    {
-	PRINTF("Unable to allocate one megabyte for emulator\n");
-	return 0;
-    }
-
-    if (attempt_map_rom(gr_dev, M.mem_base + EMULATOR_BIOS_OFFSET) == 0)
-    {
-	PRINTF("Error mapping rom. Emulation terminated\n");
-	return 0;
-    }
-
-    s = getenv("x86_ask_start");
-    if (s)
-    {
-	printf("Press 'q' to skip initialization, 'd' for dry init\n'i' for i/o session");
-	while (!tstc());
-	c = getc();
-	if (c == 'q') return 0;
-	if (c == 'd')
-	{
-	    extern void bios_set_mode(int mode);
-	    bios_set_mode(0x03);
-	    return 0;
-	}
-	if (c == 'i') do_inout();
-    }
-
-
-
-#ifdef EASTEREGG
-/*    if (tstc())
-    {
-	if (getc() == 'c')
-	{
-	    easteregg_active = 1;
-	}
-    }
-*/
-    if (getenv("easteregg"))
-    {
-	easteregg_active = 1;
-    }
-
-    if (easteregg_active)
-    {
-	/* Yay! */
-	setenv("x86_mode", "1");
-	setenv("vga_fg_color", "11");
-	setenv("vga_bg_color", "1");
-	easteregg_active = 1;
-    }
-#endif
-
-    strap = (u8*)M.mem_base + EMULATOR_STRAP_OFFSET;
-
-    {
-	char *m = getenv("x86_mode");
-	if (m)
-	{
-	    more_strap[3] = atoi(m);
-	    if (more_strap[3] == 1) video_size(40, 25);
-	    else                    video_size(80, 25);
-	}
-    }
-
-    /*
-     * Poke the strap routine. This might need a bit of extending
-     * if there is a mode switch involved, i.e. we want to int10
-     * afterwards to set a different graphics mode, or alternatively
-     * there might be a different start address requirement if the
-     * ROM doesn't have an x86 image in its first image.
-     */
-
-    PRINTF("Poking strap...\n");
-
-    /* FAR CALL c000:0003 */
-    *strap++ = 0x9A; *strap++ = 0x03; *strap++ = 0x00;
-    *strap++ = 0x00; *strap++ = 0xC0;
-
-    /* insert additional strap code */
-    for (i=0; i < MORE_STRAP_BYTES; i++)
-    {
-	*strap++ = more_strap[i];
-    }
-    /* HALT */
-    *strap++ = 0xF4;
-
-    PRINTF("Setting up logo data\n");
-    logo = (unsigned char *)M.mem_base + EMULATOR_LOGO_OFFSET;
-    for (i=0; i<16; i++)
-    {
-	*logo++ = 0xFF;
-    }
-
-    /*
-     * Setup the init parameters.
-     * Per PCI specs, AH must contain the bus and AL
-     * must contain the devfn, encoded as (dev<<3)|fn
-     */
-
-    /* Execution starts here */
-    M.x86.R_CS = SEG(EMULATOR_STRAP_OFFSET);
-    M.x86.R_IP = OFF(EMULATOR_STRAP_OFFSET);
-
-    /* Stack at top of ram */
-    M.x86.R_SS = SEG(EMULATOR_STACK_OFFSET);
-    M.x86.R_SP = OFF(EMULATOR_STACK_OFFSET);
-
-    /* Input parameters */
-    M.x86.R_AH = PCI_BUS(gr_dev);
-    M.x86.R_AL = (PCI_DEV(gr_dev)<<3) | PCI_FUNC(gr_dev);
-
-    /* Set the I/O and memory access functions */
-    X86EMU_setupMemFuncs(&_A1_mem);
-    X86EMU_setupPioFuncs(&_A1_pio);
-
-    /* Enable timer 2 */
-    cfg = in_byte(0x61); /* Get Misc control */
-    cfg |= 0x01;         /* Enable timer 2 */
-    out_byte(0x61, cfg); /* output again */
-
-    /* Set up the timers */
-    out_byte(0x43, 0x54);
-    out_byte(0x41, 0x18);
-
-    out_byte(0x43, 0x36);
-    out_byte(0x40, 0x00);
-    out_byte(0x40, 0x00);
-
-    out_byte(0x43, 0xb6);
-    out_byte(0x42, 0x31);
-    out_byte(0x42, 0x13);
-
-    /* Init the "BIOS". */
-    bios_init();
-
-    /* Video Card Reset */
-    out_byte(0x3D8, 0);
-    out_byte(0x3B8, 1);
-    (void)in_byte(0x3BA);
-    (void)in_byte(0x3DA);
-    out_byte(0x3C0, 0);
-    out_byte(0x61, 0xFC);
-
-#ifdef DEBUG
-    s = _getenv("x86_singlestep");
-    if (s && strcmp(s, "on")==0)
-    {
-	PRINTF("Enabling single stepping for debug\n");
-	X86EMU_trace_on();
-    }
-#endif
-
-    /* Ready set go... */
-    PRINTF("Running emulator\n");
-    X86EMU_exec();
-    PRINTF("Done running emulator\n");
-
-/* FIXME: Remove me */
-    pal_reset = getenv("x86_palette_reset");
-    if (pal_reset && strcmp(pal_reset, "on") == 0)
-    {
-	PRINTF("Palette reset\n");
-	/*(void)in_byte(0x3da); */
-	/*out_byte(0x3c0, 0); */
-
-	out_byte(0x3C8, 0);
-	out_byte(0x3C9, 0);
-	out_byte(0x3C9, 0);
-	out_byte(0x3C9, 0);
-	for (i=0; i<254; i++)
-	{
-	    out_byte(0x3C9, 63);
-	    out_byte(0x3C9, 63);
-	    out_byte(0x3C9, 63);
-	}
-
-	out_byte(0x3c0, 0x20);
-    }
-/* FIXME: remove me */
-#ifdef EASTEREGG
-    if (easteregg_active)
-    {
-	extern void video_easteregg(void);
-	video_easteregg();
-    }
-#endif
-/*
-    current_attr = video_get_attr();
-    fb = (u8 *)VIDEO_BASE;
-    for (i=0; i<video_rows()*video_cols()*2; i+=2)
-    {
-	*(fb+i) = ' ';
-	*(fb+i+1) = current_attr;
-    }
-
-    fb = (u8 *)VIDEO_BASE + (video_rows())-1*(video_cols()*2);
-    for (i=0; i<video_cols(); i++)
-    {
-	*(fb + 2*i)     = 32;
-	*(fb + 2*i + 1) = 0x17;
-    }
-
-    msg = done_msg;
-    while (*msg)
-    {
-	*fb = *msg;
-	fb  += 2;
-	msg ++;
-    }
-*/
-#ifdef DEBUG
-    if (getenv("x86_do_inout")) do_inout();
-#endif
-
-/*FIXME:    dcache_disable(); */
-    return 1;
-}
-
-/* Clean up the x86 mess */
-void shutdown_bios(void)
-{
-/*    disable_compatibility_hole(); */
-    /* Free the memory associated */
-    free(M.mem_base);
-
-}
-
-int to_int(char *buffer)
-{
-    int base = 0;
-    int res  = 0;
-
-    if (*buffer == '$')
-    {
-	base = 16;
-	buffer++;
-    }
-    else base = 10;
-
-    for (;;)
-    {
-	switch(*buffer)
-	{
-	case '0' ... '9':
-	    res *= base;
-	    res += *buffer - '0';
-	    break;
-	case 'A':
-	case 'a':
-	    res *= base;
-	    res += 10;
-	    break;
-	case 'B':
-	case 'b':
-	    res *= base;
-	    res += 11;
-	    break;
-	case 'C':
-	case 'c':
-	    res *= base;
-	    res += 12;
-	    break;
-	case 'D':
-	case 'd':
-	    res *= base;
-	    res += 13;
-	    break;
-	case 'E':
-	case 'e':
-	    res *= base;
-	    res += 14;
-	    break;
-	case 'F':
-	case 'f':
-	    res *= base;
-	    res += 15;
-	    break;
-	default:
-	    return res;
-	}
-	buffer++;
-    }
-    return res;
-}
-
-void one_arg(char *buffer, int *a)
-{
-    while (*buffer && *buffer != '\n')
-    {
-	if (*buffer == ' ') buffer++;
-	else break;
-    }
-
-    *a = to_int(buffer);
-}
-
-void two_args(char *buffer, int *a, int *b)
-{
-    while (*buffer && *buffer != '\n')
-    {
-	if (*buffer == ' ') buffer++;
-	else break;
-    }
-
-    *a = to_int(buffer);
-
-    while (*buffer && *buffer != '\n')
-    {
-	if (*buffer != ' ') buffer++;
-	else break;
-    }
-
-    while (*buffer && *buffer != '\n')
-    {
-	if (*buffer == ' ') buffer++;
-	else break;
-    }
-
-    *b = to_int(buffer);
-}
-
-void do_inout(void)
-{
-    char buffer[256];
-    char *arg1, *arg2;
-    int a,b;
-
-    printf("In/Out Session\nUse 'i[bwl]' for in, 'o[bwl]' for out and 'q' to quit\n");
-
-    do
-    {
-	cons_gets(buffer);
-	printf("\n");
-
-	*arg1 = buffer;
-	while (*arg1 != ' ' ) arg1++;
-	while (*arg1 == ' ') arg1++;
-
-	if (buffer[0] == 'i')
-	{
-	    one_arg(buffer+2, &a);
-	    switch (buffer[1])
-	    {
-	    case 'b':
-		printf("in_byte(%xh) = %xh\n", a, A1_inb(a));
-		break;
-	    case 'w':
-		printf("in_word(%xh) = %xh\n", a, A1_inw(a));
-		break;
-	    case 'l':
-		printf("in_dword(%xh) = %xh\n", a, A1_inl(a));
-		break;
-	    default:
-		printf("Invalid length '%c'\n", buffer[1]);
-		break;
-	    }
-	}
-	else if (buffer[0] == 'o')
-	{
-	    two_args(buffer+2, &a, &b);
-	    switch (buffer[1])
-	    {
-	    case 'b':
-		printf("out_byte(%d, %d)\n", a, b);
-		A1_outb(a,b);
-		break;
-	    case 'w':
-		printf("out_word(%d, %d)\n", a, b);
-		A1_outw(a, b);
-		break;
-	    case 'l':
-		printf("out_long(%d, %d)\n", a, b);
-		A1_outl(a, b);
-		break;
-	    default:
-		printf("Invalid length '%c'\n", buffer[1]);
-		break;
-	    }
-	} else if (buffer[0] == 'q') return;
-    } while (1);
-}
diff --git a/board/MAI/menu/cmd_menu.c b/board/MAI/menu/cmd_menu.c
deleted file mode 100644
index a515bd8f2f..0000000000
--- a/board/MAI/menu/cmd_menu.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <common.h>
-#include <command.h>
-
-int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] )
-{
-/*	printf("<NOT YET IMPLEMENTED>\n"); */
-	return 0;
-}
-
-#if defined(CONFIG_AMIGAONEG3SE) && (CONFIG_COMMANDS & CFG_CMD_BSP)
-U_BOOT_CMD(
-	menu,   1,      1,      do_menu,
-	"menu    - display BIOS setup menu\n",
-	""
-);
-#endif
diff --git a/board/MAI/menu/menu.c b/board/MAI/menu/menu.c
deleted file mode 100644
index c0c63a89dd..0000000000
--- a/board/MAI/menu/menu.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#include "menu.h"
-
-#define SINGLE_BOX 0
-#define DOUBLE_BOX 1
-
-void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h);
-void video_draw_text(int x, int y, int attr, char *text);
-void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr);
-void video_restore_rect(int x, int y, int w, int h, void *save_area);
-int  video_rows(void);
-int  video_cols(void);
-
-#define MAX_MENU_OPTIONS 200
-
-typedef struct
-{
-    int used;                  /* flag if this entry is used */
-    int entry_x;               /* Character column of the menu entry */
-    int entry_y;               /* Character line of the entry */
-    int option_x;              /* Character colum of the option (entry is same) */
-} option_data_t;
-
-option_data_t odata[MAX_MENU_OPTIONS];
-
-int normal_attr = 0x0F;
-int select_attr = 0x2F;
-int disabled_attr = 0x07;
-
-menu_t *root_menu;
-
-int menu_init (menu_t *root)
-{
-    char *s;
-    int i;
-
-    s = getenv("menu_normal");
-    if (s) normal_attr = atoi(s);
-
-    s = getenv("menu_select");
-    if (s) select_attr = atoi(s);
-
-    s = getenv("menu_disabled");
-    if (s) disabled_attr = atoi(s);
-
-    for (i=0; i<MAX_MENU_OPTIONS; i++) odata[i].used = 0;
-
-    root_menu = root;
-}
-
-option_data_t *menu_alloc_odata(void)
-{
-    int i;
-    for (int i=0; i<MAX_MENU_OPTIONS; i++)
-    {
-	if (odata[i].used == 0) return &odata[i];
-    }
-    return NULL;
-}
-
-void menu_free_odata(option_data_t *odata)
-{
-    odata->used = 0;
-}
-
-void menu_layout (menu_t *menu)
-{
diff --git a/board/MAI/menu/menu.h b/board/MAI/menu/menu.h
deleted file mode 100644
index 8aebb7de53..0000000000
--- a/board/MAI/menu/menu.h
+++ /dev/null
@@ -1,174 +0,0 @@
-#ifndef MENU_H
-#define MENU_H
-
-/* A single menu */
-typedef void (*menu_finish_callback)(struct menu_s *menu);
-
-typedef struct menu_s
-{
-    char *name;                     /* Menu name */
-    int  num_options;               /* Number of options in this menu */
-    int  flags;                     /* Various flags - see below */
-    int  option_align;              /* Aligns options to a field width of this much characters if != 0 */
-
-    struct menu_option_s **options; /* Pointer to this menu's options */
-    menu_finish_callback callback;  /* Called when the menu closes */
-} menu_t;
-
-/*
- * type: Type of the option (see below)
- * name: Name to display for this option
- * help: Optional help string
- * id  : optional id number
- * sys : pointer for system-specific data, init to NULL and don't touch
- */
-
-#define OPTION_PREAMBLE				\
-    int type;                     		\
-    char *name;   				\
-    char *help;   				\
-    int id;                                     \
-    void *sys;                                  \
-
-
-/*
- * Menu option types.
- * There are a number of different layouts for menu options depending
- * on their types. Currently there are the following possibilities:
- *
- * Submenu:
- *   This entry links to a new menu.
- *
- * Boolean:
- *   A simple on/off toggle entry. Booleans can be either yes/no, 0/1 or on/off.
- *   Optionally, this entry can enable/disable a set of other options. An example would
- *   be to enable/disable on-board USB, and if enabled give access to further options like
- *   irq settings, base address etc.
- *
- * Text:
- *   A single line/limited number of characters text entry box. Text can be restricted
- *   to a certain charset (digits/hex digits/all/custom). Result is also available as an
- *   int if numeric.
- *
- * Selection:
- *   One-of-many type of selection entry. User may choose on of a set of strings, which
- *   maps to a specific value for the variable.
- *
- * Routine:
- *   Selecting this calls an entry-specific routine. This can be used for saving contents etc.
- *
- * Custom:
- *   Display and behaviour of this entry is defined by a set of callbacks.
- */
-
-#define MENU_SUBMENU_TYPE 0
-typedef struct menu_submenu_s
-{
-    OPTION_PREAMBLE
-
-    menu_t *   submenu;            /* Pointer to the submenu */
-} menu_submenu_t;
-
-#define MENU_BOOLEAN_TYPE 1
-typedef struct menu_boolean_s
-{
-    OPTION_PREAMBLE
-
-    char *variable;                /* Name of the variable to getenv()/setenv() */
-    int subtype;                   /* Subtype (on/off, 0/1, yes/no, enable/disable), see below */
-    int mutex;                     /* Bit mask of options to enable/disable. Bit 0 is the option
-				      immediately following this one, bit 1 is the next one etc.
-				      bit 7 = 0 means to disable when this option is off,
-				      bit 7 = 1 means to disable when this option is on.
-				      An option is disabled when the type field's upper bit is set */
-} menu_boolean_t;
-
-/* BOOLEAN Menu flags */
-#define MENU_BOOLEAN_ONOFF         0x01
-#define MENU_BOOLEAN_01            0x02
-#define MENU_BOOLEAN_YESNO         0x03
-#define MENU_BOOLEAN_ENDIS         0x04
-#define MENU_BOOLEAN_TYPE_MASK     0x07
-
-
-#define MENU_TEXT_TYPE 2
-typedef struct menu_text_s
-{
-    OPTION_PREAMBLE
-
-    char *variable;                /* Name of the variable to getenv()/setenv() */
-    int maxchars;                  /* Max number of characters */
-    char *charset;                 /* Optional charset to use */
-    int flags;                     /* Flags - see below */
-} menu_text_t;
-
-/* TEXT entry menu flags */
-#define MENU_TEXT_NUMERIC         0x01
-#define MENU_TEXT_HEXADECIMAL     0x02
-#define MENU_TEXT_FREE            0x03
-#define MENU_TEXT_TYPE_MASK       0x07
-
-
-#define MENU_SELECTION_TYPE 3
-typedef struct menu_select_option_s
-{
-    char *map_from;               /* Map this variable contents ... */
-    char *map_to;                 /* ... to this menu text and vice versa */
-} menu_select_option_t;
-
-typedef struct menu_select_s
-{
-    OPTION_PREAMBLE
-
-    int num_options;             /* Number of mappings */
-    menu_select_option_t **options;
-				 /* Option list array */
-} menu_select_t;
-
-
-#define MENU_ROUTINE_TYPE 4
-typedef void (*menu_routine_callback)(struct menu_routine_s *);
-
-typedef struct menu_routine_s
-{
-    OPTION_PREAMBLE
-    menu_routine_callback callback;
-				 /* routine to be called */
-    void *user_data;             /* User data, don't care for system */
-} menu_routine_t;
-
-
-#define MENU_CUSTOM_TYPE 5
-typedef void (*menu_custom_draw)(struct menu_custom_s *);
-typedef void (*menu_custom_key)(struct menu_custom_s *, int);
-
-typedef struct menu_custom_s
-{
-    OPTION_PREAMBLE
-    menu_custom_draw drawfunc;
-    menu_custom_key  keyfunc;
-    void *user_data;
-} menu_custom_t;
-
-/*
- * The menu option superstructure
- */
-typedef struct menu_option_s
-{
-    union
-    {
-	menu_submenu_t m_sub_menu;
-	menu_boolean_t m_boolean;
-	menu_text_t    m_text;
-	menu_select_t  m_select;
-	menu_routine_t m_routine;
-    };
-} menu_option_t;
-
-/* Init the menu system. Returns <0 on error */
-int menu_init(menu_t *root);
-
-/* Execute a single menu. Returns <0 on error */
-int menu_do(menu_t *menu);
-
-#endif
diff --git a/board/Marvell/db64360/64360.h b/board/Marvell/db64360/64360.h
deleted file mode 100644
index a65e23be4e..0000000000
--- a/board/Marvell/db64360/64360.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * main board support/init for the Galileo Eval board DB64360.
- */
-
-#ifndef __64360_H__
-#define __64360_H__
-
-/* CPU Configuration bits */
-#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
-#define	CPU_CONF_SINGLE_CPU	(1 << 11)
-#define	CPU_CONF_ENDIANESS	(1 << 12)
-#define CPU_CONF_PIPELINE	(1 << 13)
-#define CPU_CONF_STOP_RETRY	(1 << 17)
-#define CPU_CONF_MULTI_DECODE	(1 << 18)
-#define CPU_CONF_DP_VALID	(1 << 19)
-#define CPU_CONF_PERR_PROP	(1 << 22)
-#define CPU_CONF_AACK_DELAY_2	(1 << 25)
-#define CPU_CONF_AP_VALID	(1 << 26)
-#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
-
-/* CPU Master Control bits */
-#define CPU_MAST_CTL_ARB_EN	(1 << 8)
-#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
-#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
-#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
-#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
-#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
-
-#endif /* __64360_H__ */
diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile
deleted file mode 100644
index 641a0ab860..0000000000
--- a/board/Marvell/db64360/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-SOBJS	= ../common/misc.o
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
-	  mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
-	  sdram_init.o ../common/intel_flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/Marvell/db64360/config.mk b/board/Marvell/db64360/config.mk
deleted file mode 100644
index 0e42b48e17..0000000000
--- a/board/Marvell/db64360/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EVB64360 boards
-#
-
-TEXT_BASE = 0xfff00000
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
deleted file mode 100644
index 3337e52afd..0000000000
--- a/board/Marvell/db64360/db64360.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
- */
-
-/*
- * db64360.c - main board support/init for the Galileo Eval board.
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../include/memory.h"
-#include "../include/pci.h"
-#include "../include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "i2c.h"
-#include "64360.h"
-#include "mv_regs.h"
-
-#undef	DEBUG
-/*#define	DEBUG */
-
-#define	MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-
-/* ------------------------------------------------------------------------- */
-
-/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
-
-/* Unfortunately, we cant change it while we are in flash, so we initialize it
- * to the "final" value. This means that any debug_led calls before
- * board_early_init_f wont work right (like in cpu_init_f).
- * See also my_remap_gt_regs below. (NTL)
- */
-
-void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
-int display_mem_map (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This is a version of the GT register space remapping function that
- * doesn't touch globals (meaning, it's ok to run from flash.)
- *
- * Unfortunately, this has the side effect that a writable
- * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
- */
-
-void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	/* check and see if it's already moved */
-
-/* original ppcboot 1.1.6 source
-
-	temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 20)
-		return;
-
-	temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 20);
-
-	out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
-original ppcboot 1.1.6 source end */
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
-}
-
-#ifdef CONFIG_PCI
-
-static void gt_pci_config (void)
-{
-	unsigned int stat;
-	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
-
-	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
-	 * config registers by writing ones to the bus and device.
-	 * We then update the Virtual register with the correct value for the bus and device.
-	 */
-	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-
-		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-
-	}
-	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-	}
-
-	/* Enable master */
-	PCI_MASTER_ENABLE (0, SELF);
-	PCI_MASTER_ENABLE (1, SELF);
-
-	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
-	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
-	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
-									     <<
-									     18);
-	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
-	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
-
-	/* ronen- add write to pci remap registers for 64460.
-	   in 64360 when writing to pci base go and overide remap automaticaly,
-	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
-
-	/* PCI interface settings */
-	/* Timeout set to retry forever */
-	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
-	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
-
-	/* ronen - enable only CS0 and Internal reg!! */
-	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-
-/*ronen update the pci internal registers base address.*/
-#ifdef MAP_PCI
-	for (stat = 0; stat <= PCI_HOST1; stat++)
-		pciWriteConfigReg (stat,
-				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
-#endif
-
-}
-#endif
-
-/* Setup CPU interface paramaters */
-static void gt_cpu_config (void)
-{
-	cpu_t cpu = get_cpu_type ();
-	ulong tmp;
-
-	/* cpu configuration register */
-	tmp = GTREGREAD (CPU_CONFIGURATION);
-
-	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
-	tmp |= CPU_CONF_SINGLE_CPU;
-#endif
-
-	tmp &= ~CPU_CONF_AACK_DELAY_2;
-
-	tmp |= CPU_CONF_DP_VALID;
-	tmp |= CPU_CONF_AP_VALID;
-
-	tmp |= CPU_CONF_PIPELINE;
-
-	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
-
-	/* CPU master control register */
-	tmp = GTREGREAD (CPU_MASTER_CONTROL);
-
-	tmp |= CPU_MAST_CTL_ARB_EN;
-
-	if ((cpu == CPU_7400) ||
-	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
-
-		tmp |= CPU_MAST_CTL_CLEAN_BLK;
-		tmp |= CPU_MAST_CTL_FLUSH_BLK;
-
-	} else {
-		/* cleanblock must be cleared for CPUs
-		 * that do not support this command (603e, 750)
-		 * see Res#1 */
-		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
-		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
-	}
-	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
-}
-
-/*
- * board_early_init_f.
- *
- * set up gal. device mappings, etc.
- */
-int board_early_init_f (void)
-{
-	uchar sram_boot = 0;
-
-	/*
-	 * set up the GT the way the kernel wants it
-	 * the call to move the GT register space will obviously
-	 * fail if it has already been done, but we're going to assume
-	 * that if it's not at the power-on location, it's where we put
-	 * it last time. (huber)
-	 */
-
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
-
-	/* No PCI in first release of Port To_do: enable it. */
-#ifdef CONFIG_PCI
-	gt_pci_config ();
-#endif
-	/* mask all external interrupt sources */
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
-	/* new in MV6436x */
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
-	/* --------------------- */
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	/* does not exist in MV6436x
-	   GT_REG_WRITE(CPU_INT_0_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_1_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_2_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_3_MASK, 0);
-	   --------------------- */
-
-
-	/* ----- DEVICE BUS SETTINGS ------ */
-
-	/*
-	 * EVB
-	 * 0 - SRAM   ????
-	 * 1 - RTC      ????
-	 * 2 - UART     ????
-	 * 3 - Flash    checked 32Bit Intel Strata
-	 * boot - BootCS checked 8Bit 29LV040B
-	 *
-	 * Zuma
-	 * 0 - Flash
-	 * boot - BootCS
-	 */
-
-	/*
-	 * the dual 7450 module requires burst access to the boot
-	 * device, so the serial rom copies the boot device to the
-	 * on-board sram on the eval board, and updates the correct
-	 * registers to boot from the sram. (device0)
-	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
-		sram_boot = 1;
-	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
-
-
-	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
-	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
-#endif
-
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
-#endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
-#endif
-
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
-	/* detect if we are booting from the 32 bit flash */
-	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
-		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
-	} else {
-		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
-	}
-#else
-	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
-#endif
-
-
-	gt_cpu_config ();
-
-	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
-
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
-	DEBUG_LED0_ON ();
-	DEBUG_LED1_ON ();
-	DEBUG_LED2_ON ();
-
-	return 0;
-}
-
-/* various things to do after relocation */
-
-int misc_init_r ()
-{
-	icache_enable ();
-#ifdef CFG_L2
-	l2cache_enable ();
-#endif
-#ifdef CONFIG_MPSC
-
-	mpsc_sdma_init ();
-	mpsc_init2 ();
-#endif
-
-	return 0;
-}
-
-void after_reloc (ulong dest_addr, gd_t * gd)
-{
-	/* check to see if we booted from the sram.  If so, move things
-	 * back to the way they should be. (we're running from main
-	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
-	}
-	display_mem_map ();
-	/* now, jump to the main ppcboot board init code */
-	board_init_r (gd, dest_addr);
-	/* NOTREACHED */
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- *
- * right now, assume borad type. (there is just one...after all)
- */
-
-int checkboard (void)
-{
-	int l_type = 0;
-
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
-	return (l_type);
-}
-
-/* utility functions */
-void debug_led (int led, int mode)
-{
-	volatile int *addr = 0;
-	int dummy;
-
-	if (mode == 1) {
-		switch (led) {
-		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x08000);
-			break;
-
-		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x0c000);
-			break;
-
-		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x10000);
-			break;
-		}
-	} else if (mode == 0) {
-		switch (led) {
-		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x14000);
-			break;
-
-		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x18000);
-			break;
-
-		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x1c000);
-			break;
-		}
-	}
-
-	dummy = *addr;
-}
-
-int display_mem_map (void)
-{
-	int i, j;
-	unsigned int base, size, width;
-
-	/* SDRAM */
-	printf ("SD (DDR) RAM\n");
-	for (i = 0; i <= BANK3; i++) {
-		base = memoryGetBankBaseAddress (i);
-		size = memoryGetBankSize (i);
-		if (size != 0) {
-			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
-				i, base, size >> 20);
-		}
-	}
-
-	/* CPU's PCI windows */
-	for (i = 0; i <= PCI_HOST1; i++) {
-		printf ("\nCPU's PCI %d windows\n", i);
-		base = pciGetSpaceBase (i, PCI_IO);
-		size = pciGetSpaceSize (i, PCI_IO);
-		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
-			size >> 20);
-		for (j = 0;
-		     j <=
-		     PCI_REGION0
-		     /*ronen currently only first PCI MEM is used 3 */ ;
-		     j++) {
-			base = pciGetSpaceBase (i, j);
-			size = pciGetSpaceSize (i, j);
-			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
-		}
-	}
-
-	/* Devices */
-	printf ("\nDEVICES\n");
-	for (i = 0; i <= DEVICE3; i++) {
-		base = memoryGetDeviceBaseAddress (i);
-		size = memoryGetDeviceSize (i);
-		width = memoryGetDeviceWidth (i) * 8;
-		printf ("DEV %d:  base - 0x%08x  size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
-		if (i == 0)
-			printf ("\t- EXT SRAM (actual - 1M)\n");
-		else if (i == 1)
-			printf ("\t- RTC\n");
-		else if (i == 2)
-			printf ("\t- UART\n");
-		else
-			printf ("\t- LARGE FLASH\n");
-	}
-
-	/* Bootrom */
-	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
-	size = memoryGetDeviceSize (BOOT_DEVICE);
-	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
-	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\n",
-		base, size >> 20, width);
-	return (0);
-}
-
-/* DRAM check routines copied from gw8260 */
-
-#if defined (CFG_DRAM_TEST)
-
-/*********************************************************************/
-/* NAME:  move64() -  moves a double word (64-bit)		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   this function performs a double word move from the data at	     */
-/*   the source pointer to the location at the destination pointer.  */
-/*								     */
-/* INPUTS:							     */
-/*   unsigned long long *src  - pointer to data to move		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   unsigned long long *dest - pointer to locate to move data	     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   May cloober fr0.						     */
-/*								     */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
-	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
-	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
-      : : : "fr0");		/* Clobbers fr0         */
-	return;
-}
-
-
-#if defined (CFG_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaaULL,
-	0xccccccccccccccccULL,
-	0xf0f0f0f0f0f0f0f0ULL,
-	0xff00ff00ff00ff00ULL,
-	0xffff0000ffff0000ULL,
-	0xffffffff00000000ULL,
-	0x00000000ffffffffULL,
-	0x0000ffff0000ffffULL,
-	0x00ff00ff00ff00ffULL,
-	0x0f0f0f0f0f0f0f0fULL,
-	0x3333333333333333ULL,
-	0x5555555555555555ULL,
-};
-
-/*********************************************************************/
-/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Tests data lines for shorts and opens by forcing adjacent data  */
-/*   to opposite states. Because the data lines could be routed in   */
-/*   an arbitrary manner the must ensure test patterns ensure that   */
-/*   every case is tested. By using the following series of binary   */
-/*   patterns every combination of adjacent bits is test regardless  */
-/*   of routing.						     */
-/*								     */
-/*     ...101010101010101010101010				     */
-/*     ...110011001100110011001100				     */
-/*     ...111100001111000011110000				     */
-/*     ...111111110000000011111111				     */
-/*								     */
-/*   Carrying this out, gives us six hex patterns as follows:	     */
-/*								     */
-/*     0xaaaaaaaaaaaaaaaa					     */
-/*     0xcccccccccccccccc					     */
-/*     0xf0f0f0f0f0f0f0f0					     */
-/*     0xff00ff00ff00ff00					     */
-/*     0xffff0000ffff0000					     */
-/*     0xffffffff00000000					     */
-/*								     */
-/*   The number test patterns will always be given by:		     */
-/*								     */
-/*   log(base 2)(number data bits) = log2 (64) = 6		     */
-/*								     */
-/*   To test for short and opens to other signals on our boards. we  */
-/*   simply							     */
-/*   test with the 1's complemnt of the paterns as well.	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern				     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*  Assumes only one one SDRAM bank				     */
-/*								     */
-/*********************************************************************/
-int mem_test_data (void)
-{
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
-	unsigned long long temp64 = 0;
-	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
-	int i;
-	unsigned int hi, lo;
-
-	for (i = 0; i < num_patterns; i++) {
-		move64 (&(pattern[i]), pmem);
-		move64 (pmem, &temp64);
-
-		/* hi = (temp64>>32) & 0xffffffff;          */
-		/* lo = temp64 & 0xffffffff;                */
-		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
-		hi = (pattern[i] >> 32) & 0xffffffff;
-		lo = pattern[i] & 0xffffffff;
-		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
-
-		if (temp64 != pattern[i]) {
-			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
-				hi, lo);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_DATA */
-
-#if defined (CFG_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME:  mem_test_address() -	test address lines		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function performs a test to verify that each word im	     */
-/*   memory is uniquly addressable. The test sequence is as follows: */
-/*								     */
-/*   1) write the address of each word to each word.		     */
-/*   2) verify that each location equals its address		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_address (void)
-{
-	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
-	unsigned int i;
-
-	/* write address to each location */
-	for (i = 0; i < size; i++) {
-		pmem[i] = i;
-	}
-
-	/* verify each loaction */
-	for (i = 0; i < size; i++) {
-		if (pmem[i] != i) {
-			printf ("\n   Address Test Failed at 0x%x", i);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_ADDRESS */
-
-#if defined (CFG_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME:   mem_march() -  memory march				     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Marches up through memory. At each location verifies rmask if   */
-/*   read = 1. At each location write wmask if	write = 1. Displays  */
-/*   failing address and pattern.				     */
-/*								     */
-/* INPUTS:							     */
-/*   volatile unsigned long long * base - start address of test	     */
-/*   unsigned int size - number of dwords(64-bit) to test	     */
-/*   unsigned long long rmask - read verify mask		     */
-/*   unsigned long long wmask - wrtie verify mask		     */
-/*   short read - verifies rmask if read = 1			     */
-/*   short write  - writes wmask if write = 1			     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
-	       unsigned int size,
-	       unsigned long long rmask,
-	       unsigned long long wmask, short read, short write)
-{
-	unsigned int i;
-	unsigned long long temp = 0;
-	unsigned int hitemp, lotemp, himask, lomask;
-
-	for (i = 0; i < size; i++) {
-		if (read != 0) {
-			/* temp = base[i]; */
-			move64 ((unsigned long long *) &(base[i]), &temp);
-			if (rmask != temp) {
-				hitemp = (temp >> 32) & 0xffffffff;
-				lotemp = temp & 0xffffffff;
-				himask = (rmask >> 32) & 0xffffffff;
-				lomask = rmask & 0xffffffff;
-
-				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
-				return 1;
-			}
-		}
-		if (write != 0) {
-			/*  base[i] = wmask; */
-			move64 (&wmask, (unsigned long long *) &(base[i]));
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME:   mem_test_walk() -  a simple walking ones test	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Performs a walking ones through entire physical memory. The     */
-/*   test uses as series of memory marches, mem_march(), to verify   */
-/*   and write the test patterns to memory. The test sequence is as  */
-/*   follows:							     */
-/*     1) march writing 0000...0001				     */
-/*     2) march verifying 0000...0001  , writing  0000...0010	     */
-/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
-/*	   the write mask equals 1000...0000			     */
-/*     4) march verifying 1000...0000				     */
-/*   The test fails if any of the memory marches return a failure.   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays which pass on the memory test is executing	     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_walk (void)
-{
-	unsigned long long mask;
-	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
-
-	unsigned int i;
-
-	mask = 0x01;
-
-	printf ("Initial Pass");
-	mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-	printf ("		");
-	printf ("         ");
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
-	for (i = 0; i < 63; i++) {
-		printf ("Pass %2d", i + 2);
-		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
-			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
-			return 1;
-		}
-		mask = mask << 1;
-		printf ("\b\b\b\b\b\b\b");
-	}
-
-	printf ("Last Pass");
-	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
-		/* printf("mask: 0x%x", mask); */
-		return 1;
-	}
-	printf ("\b\b\b\b\b\b\b\b\b");
-	printf ("	     ");
-	printf ("\b\b\b\b\b\b\b\b\b");
-
-	return 0;
-}
-
-/*********************************************************************/
-/* NAME:    testdram() -  calls any enabled memory tests	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Runs memory tests if the environment test variables are set to  */
-/*   'y'.							     */
-/*								     */
-/* INPUTS:							     */
-/*   testdramdata    - If set to 'y', data test is run.		     */
-/*   testdramaddress - If set to 'y', address test is run.	     */
-/*   testdramwalk    - If set to 'y', walking ones test is run	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int testdram (void)
-{
-	char *s;
-	int rundata, runaddress, runwalk;
-
-	s = getenv ("testdramdata");
-	rundata = (s && (*s == 'y')) ? 1 : 0;
-	s = getenv ("testdramaddress");
-	runaddress = (s && (*s == 'y')) ? 1 : 0;
-	s = getenv ("testdramwalk");
-	runwalk = (s && (*s == 'y')) ? 1 : 0;
-
-/*    rundata = 1; */
-/*    runaddress = 0; */
-/*    runwalk = 0; */
-
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
-	}
-#ifdef CFG_DRAM_TEST_DATA
-	if (rundata == 1) {
-		printf ("Test DATA ...  ");
-		if (mem_test_data () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	if (runaddress == 1) {
-		printf ("Test ADDRESS ...  ");
-		if (mem_test_address () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	if (runwalk == 1) {
-		printf ("Test WALKING ONEs ...  ");
-		if (mem_test_walk () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("passed\n");
-	}
-	return 0;
-
-}
-#endif /* CFG_DRAM_TEST */
-
-/* ronen - the below functions are used by the bootm function           */
-/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
-/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
-/*    the kernel data areas.                                            */
-/*  - we diable and invalidate the icache and dcache.                   */
-void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
-							new_loc |
-							(INTERNAL_SPACE_DECODE)))))
-	       != temp);
-
-}
-
-void board_prebootm_init ()
-{
-
-/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
-		GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
-
-/* Stop GigE Rx DMA engines */
-	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
-	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00);
-/* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
-
-/* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
-
-	icache_disable ();
-	invalidate_l1_instruction_cache ();
-	flush_data_cache ();
-	dcache_disable ();
-}
diff --git a/board/Marvell/db64360/eth.h b/board/Marvell/db64360/eth.h
deleted file mode 100644
index aab32d2a5a..0000000000
--- a/board/Marvell/db64360/eth.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __EVB64360_ETH_H__
-#define __EVB64360_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-
-
-int db64360_eth0_poll(void);
-int db64360_eth0_transmit(unsigned int s, volatile char *p);
-void db64360_eth0_disable(void);
-bool network_start(bd_t *bis);
-
-
-#endif /* __EVB64360_ETH_H__ */
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
deleted file mode 100644
index bccbe6da73..0000000000
--- a/board/Marvell/db64360/mpsc.c
+++ /dev/null
@@ -1,1000 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-/*
- * mpsc.c - driver for console over the MPSC.
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <asm/cache.h>
-
-#include <malloc.h>
-#include "mpsc.h"
-
-#include "mv_regs.h"
-
-#include "../include/memory.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Define this if you wish to use the MPSC as a register based UART.
- * This will force the serial port to not use the SDMA engine at all.
- */
-#undef CONFIG_MPSC_DEBUG_PORT
-
-
-int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
-char (*mpsc_getchar) (void) = mpsc_getchar_debug;
-int (*mpsc_test_char) (void) = mpsc_test_char_debug;
-
-
-static volatile unsigned int *rx_desc_base = NULL;
-static unsigned int rx_desc_index = 0;
-static volatile unsigned int *tx_desc_base = NULL;
-static unsigned int tx_desc_index = 0;
-
-/* local function declarations */
-static int galmpsc_connect (int channel, int connect);
-static int galmpsc_route_rx_clock (int channel, int brg);
-static int galmpsc_route_tx_clock (int channel, int brg);
-static int galmpsc_write_config_regs (int mpsc, int mode);
-static int galmpsc_config_channel_regs (int mpsc);
-static int galmpsc_set_char_length (int mpsc, int value);
-static int galmpsc_set_stop_bit_length (int mpsc, int value);
-static int galmpsc_set_parity (int mpsc, int value);
-static int galmpsc_enter_hunt (int mpsc);
-static int galmpsc_set_brkcnt (int mpsc, int value);
-static int galmpsc_set_tcschar (int mpsc, int value);
-static int galmpsc_set_snoop (int mpsc, int value);
-static int galmpsc_shutdown (int mpsc);
-
-static int galsdma_set_RFT (int channel);
-static int galsdma_set_SFM (int channel);
-static int galsdma_set_rxle (int channel);
-static int galsdma_set_txle (int channel);
-static int galsdma_set_burstsize (int channel, unsigned int value);
-static int galsdma_set_RC (int channel, unsigned int value);
-
-static int galbrg_set_CDV (int channel, int value);
-static int galbrg_enable (int channel);
-static int galbrg_disable (int channel);
-static int galbrg_set_clksrc (int channel, int value);
-static int galbrg_set_CUV (int channel, int value);
-
-static void galsdma_enable_rx (void);
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress,
-				  unsigned int size);
-
-
-#define SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-#define FLUSH_DCACHE(a,b)
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-static void mpsc_debug_init (void)
-{
-
-	volatile unsigned int temp;
-
-	/* Clear the CFR  (CHR4) */
-	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
-	temp &= 0xffffff00;
-	temp |= BIT29;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
-	temp |= (BIT12 | BIT15);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set int mask */
-	temp = GTREGREAD (GALMPSC_0_INT_MASK);
-	temp |= BIT6;
-	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
-}
-#endif
-
-char mpsc_getchar_debug (void)
-{
-	volatile int temp;
-	volatile unsigned int cause;
-
-	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	while ((cause & BIT6) == 0) {
-		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	}
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
-			  (CHANNEL * GALMPSC_REG_GAP));
-	/* By writing 1's to the set bits, the register is cleared */
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
-	return (temp >> 16) & 0xff;
-}
-
-/* special function for running out of flash.  doesn't modify any
- * global variables [josh] */
-int mpsc_putchar_early (char ch)
-{
-	int mpsc = CHANNEL;
-	int temp =
-		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	galmpsc_set_tcschar (mpsc, ch);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
-		      temp | 0x200);
-
-#define MAGIC_FACTOR	(10*1000000)
-
-	udelay (MAGIC_FACTOR / gd->baudrate);
-	return 0;
-}
-
-/* This is used after relocation, see serial.c and mpsc_init2 */
-static int mpsc_putchar_sdma (char ch)
-{
-	volatile unsigned int *p;
-	unsigned int temp;
-
-
-	/* align the descriptor */
-	p = tx_desc_base;
-	memset ((void *) p, 0, 8 * sizeof (unsigned int));
-
-	/* fill one 64 bit buffer */
-	/* word swap, pad with 0 */
-	p[4] = 0;		/* x */
-	p[5] = (unsigned int) ch;	/* x */
-
-	/* CHANGED completely according to GT64260A dox - NTL */
-	p[0] = 0x00010001;	/* 0 */
-	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
-	p[2] = 0;		/* 8 */
-	p[3] = (unsigned int) &p[4];	/* c */
-
-
-	FLUSH_DCACHE (&p[0], &p[8]);
-
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= (TX_DEMAND | TX_STOP);
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	while (p[1] & DESC_OWNER_BIT) {
-		udelay (100);
-		INVALIDATE_DCACHE (&p[1], &p[2]);
-	}
-	return 0;
-}
-
-char mpsc_getchar_sdma (void)
-{
-	static unsigned int done = 0;
-	volatile char ch;
-	unsigned int len = 0, idx = 0, temp;
-
-	volatile unsigned int *p;
-
-
-	do {
-		p = &rx_desc_base[rx_desc_index * 8];
-
-		INVALIDATE_DCACHE (&p[0], &p[1]);
-		/* Wait for character */
-		while (p[1] & DESC_OWNER_BIT) {
-			udelay (100);
-			INVALIDATE_DCACHE (&p[0], &p[1]);
-		}
-
-		/* Handle error case */
-		if (p[1] & (1 << 15)) {
-			printf ("oops, error: %08x\n", p[1]);
-
-			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
-					  (CHANNEL * GALMPSC_REG_GAP));
-			temp |= (1 << 23);
-			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
-				      (CHANNEL * GALMPSC_REG_GAP), temp);
-
-			/* Can't poll on abort bit, so we just wait. */
-			udelay (100);
-
-			galsdma_enable_rx ();
-		}
-
-		/* Number of bytes left in this descriptor */
-		len = p[0] & 0xffff;
-
-		if (len) {
-			/* Where to look */
-			idx = 5;
-			if (done > 3)
-				idx = 4;
-			if (done > 7)
-				idx = 7;
-			if (done > 11)
-				idx = 6;
-
-			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
-			ch = p[idx] & 0xff;
-			done++;
-		}
-
-		if (done < len) {
-			/* this descriptor has more bytes still
-			 * shift down the char we just read, and leave the
-			 * buffer in place for the next time around
-			 */
-			p[idx] = p[idx] >> 8;
-			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
-		}
-
-		if (done == len) {
-			/* nothing left in this descriptor.
-			 * go to next one
-			 */
-			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-			p[0] = 0x00100000;
-			FLUSH_DCACHE (&p[0], &p[1]);
-			/* Next descriptor */
-			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
-			done = 0;
-		}
-	} while (len == 0);	/* galileo bug.. len might be zero */
-
-	return ch;
-}
-
-
-int mpsc_test_char_debug (void)
-{
-	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
-		return 0;
-	else {
-		return 1;
-	}
-}
-
-
-int mpsc_test_char_sdma (void)
-{
-	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	if (p[1] & DESC_OWNER_BIT)
-		return 0;
-	else
-		return 1;
-}
-
-int mpsc_init (int baud)
-{
-	/* BRG CONFIG */
-	galbrg_set_baudrate (CHANNEL, baud);
-	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
-	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
-	galbrg_enable (CHANNEL);	/* Enable BRG */
-
-	/* Set up clock routing */
-	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
-
-	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
-	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
-
-	/* reset MPSC state */
-	galmpsc_shutdown (CHANNEL);
-
-	/* SDMA CONFIG */
-	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
-	galsdma_set_txle (CHANNEL);
-	galsdma_set_rxle (CHANNEL);
-	galsdma_set_RC (CHANNEL, 0xf);
-	galsdma_set_SFM (CHANNEL);
-	galsdma_set_RFT (CHANNEL);
-
-	/* MPSC CONFIG */
-	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
-	galmpsc_config_channel_regs (CHANNEL);
-	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
-	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
-	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-	mpsc_debug_init ();
-#endif
-
-	/* COMM_MPSC CONFIG */
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
-#else
-	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
-#endif
-
-	return 0;
-}
-
-
-void mpsc_sdma_init (void)
-{
-/* Setup SDMA channel0 SDMA_CONFIG_REG*/
-	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
-
-/*  Enable MPSC-Window0 for DRAM Bank0   */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_0_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK0)) != true)
-		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window1    */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_1_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_1_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window2 */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_2_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_2_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window3 */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_3_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_3_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
-			__FUNCTION__);
-
-/*  Setup MPSC0 access mode Window0 full access */
-	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
-			 (MV64360_SDMA_WIN_ACCESS_FULL <<
-			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/*  Setup MPSC1 access mode Window1 full access */
-	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
-			 (MV64360_SDMA_WIN_ACCESS_FULL <<
-			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/* Setup MPSC internal address space base address 	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
-
-/* no high address remap*/
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
-
-/* clear interrupt cause register for MPSC (fault register)*/
-	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
-}
-
-
-void mpsc_init2 (void)
-{
-	int i;
-
-#ifndef CONFIG_MPSC_DEBUG_PORT
-	mpsc_putchar = mpsc_putchar_sdma;
-	mpsc_getchar = mpsc_getchar_sdma;
-	mpsc_test_char = mpsc_test_char_sdma;
-#endif
-	/* RX descriptors */
-	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	rx_desc_base = (unsigned int *)
-		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
-
-	rx_desc_index = 0;
-
-	memset ((void *) rx_desc_base, 0,
-		(RX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < RX_DESC; i++) {
-		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
-		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
-		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
-		rx_desc_base[i * 8] = 0x00100000;
-	}
-	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
-
-	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &rx_desc_base[0]);
-
-	/* TX descriptors */
-	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	tx_desc_base = (unsigned int *)
-		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
-
-	tx_desc_index = -1;
-
-	memset ((void *) tx_desc_base, 0,
-		(TX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < TX_DESC; i++) {
-		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 3] =
-			(unsigned int) &tx_desc_base[i * 8 + 4];
-		tx_desc_base[i * 8 + 2] =
-			(unsigned int) &tx_desc_base[(i + 1) * 8];
-		tx_desc_base[i * 8 + 1] =
-			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-
-		/* set sbytecnt and shadow byte cnt to 1 */
-		tx_desc_base[i * 8] = 0x00010001;
-	}
-	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
-
-	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
-
-	udelay (100);
-
-	galsdma_enable_rx ();
-
-	return;
-}
-
-int galbrg_set_baudrate (int channel, int rate)
-{
-	int clock;
-
-	galbrg_disable (channel);	/*ok */
-
-#ifdef ZUMA_NTL
-	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#endif
-
-	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
-
-	galbrg_enable (channel);
-
-	gd->baudrate = rate;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-/* Below are all the private functions that no one else needs */
-
-static int galbrg_set_CDV (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= (value & 0x0000FFFF);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_enable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp |= 0x00010000;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_disable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFEFFFF;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_set_clksrc (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
-	temp |= (value << 18);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-	return 0;
-}
-
-static int galbrg_set_CUV (int channel, int value)
-{
-	/* set CountUpValue */
-	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
-
-	return 0;
-}
-
-
-static int galsdma_set_RFT (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000001;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_SFM (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000002;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_rxle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000040;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_txle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000080;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_RC (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= ~0x0000003c;
-	temp |= (value << 2);
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_burstsize (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= 0xFFFFCFFF;
-	switch (value) {
-	case 8:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x3 << 12)));
-		break;
-
-	case 4:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x2 << 12)));
-		break;
-
-	case 2:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x1 << 12)));
-		break;
-
-	case 1:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x0 << 12)));
-		break;
-
-	default:
-		return -1;
-		break;
-	}
-
-	return 0;
-}
-
-static int galmpsc_connect (int channel, int connect)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
-
-	if ((channel == 0) && connect)
-		temp &= ~0x00000007;
-	else if ((channel == 1) && connect)
-		temp &= ~(0x00000007 << 6);
-	else if ((channel == 0) && !connect)
-		temp |= 0x00000007;
-	else
-		temp |= (0x00000007 << 6);
-
-	/* Just in case... */
-	temp &= 0x3fffffff;
-
-	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_rx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_tx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_write_config_regs (int mpsc, int mode)
-{
-	if (mode == GALMPSC_UART) {
-		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
-		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
-			      0x000004c4);
-
-		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
-		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
-			      0x024003f8);
-		/*        22 2222 1111 */
-		/*        54 3210 9876 */
-		/* 0000 0010 0000 0000 */
-		/*       1 */
-		/*       098 7654 3210 */
-		/* 0000 0011 1111 1000 */
-	} else
-		return -1;
-
-	return 0;
-}
-
-static int galmpsc_config_channel_regs (int mpsc)
-{
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
-
-	galmpsc_set_brkcnt (mpsc, 0x3);
-	galmpsc_set_tcschar (mpsc, 0xab);
-
-	return 0;
-}
-
-static int galmpsc_set_brkcnt (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0x0000FFFF;
-	temp |= (value << 16);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_tcschar (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= value;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_char_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFCFFF;
-	temp |= (value << 12);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_stop_bit_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFBFFF;
-	temp |= (value << 14);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_parity (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	if (value != -1) {
-		temp &= 0xFFF3FFF3;
-		temp |= ((value << 18) | (value << 2));
-		temp |= ((value << 17) | (value << 1));
-	} else {
-		temp &= 0xFFF1FFF1;
-	}
-
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_enter_hunt (int mpsc)
-{
-	int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= 0x80000000;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
-	       MPSC_ENTER_HUNT) {
-		udelay (1);
-	}
-	return 0;
-}
-
-
-static int galmpsc_shutdown (int mpsc)
-{
-	unsigned int temp;
-
-	/* cause RX abort (clears RX) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
-	temp &= ~MPSC_ENTER_HUNT;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
-
-	/* shut down the MPSC */
-	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
-	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
-
-	udelay (100);
-
-	/* shut down the sdma engines. */
-	/* reset config to default */
-	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
-
-	udelay (100);
-
-	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
-
-	udelay (100);
-
-	return 0;
-}
-
-static void galsdma_enable_rx (void)
-{
-	int temp;
-
-	/* Enable RX processing */
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= RX_ENABLE;
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	galmpsc_enter_hunt (CHANNEL);
-}
-
-static int galmpsc_set_snoop (int mpsc, int value)
-{
-	int reg =
-		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
-		MPSC_0_ADDRESS_CONTROL_LOW;
-	int temp = GTREGREAD (reg);
-
-	if (value)
-		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
-	else
-		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
-	GT_REG_WRITE (reg, temp);
-	return 0;
-}
-
-/*******************************************************************************
-* galsdma_set_mem_space - Set MV64360 IDMA memory decoding map.
-*
-* DESCRIPTION:
-*       the MV64360 SDMA has its own address decoding map that is de-coupled
-*       from the CPU interface address decoding windows. The SDMA channels
-*       share four address windows. Each region can be individually configured
-*       by this function by associating it to a target interface and setting
-*       base and size values.
-*
-*      NOTE!!!
-*       The size must be in 64Kbyte granularity.
-*       The base address must be aligned to the size.
-*       The size must be a series of 1s followed by a series of zeros
-*
-* OUTPUT:
-*       None.
-*
-* RETURN:
-*       True for success, false otherwise.
-*
-*******************************************************************************/
-
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress, unsigned int size)
-{
-	unsigned int temp;
-
-	if (size == 0) {
-		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-		return true;
-	}
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return false;
-	}
-	if (size < 0x10000) {
-		return false;
-	}
-
-	/* Align size and base to 64K */
-	baseAddress &= 0xffff0000;
-	size &= 0xffff0000;
-	temp = size >> 16;
-
-	/* Checking that the size is a sequence of '1' followed by a
-	   sequence of '0' starting from LSB to MSB. */
-	while ((temp > 0) && (temp & 0x1)) {
-		temp = temp >> 1;
-	}
-
-	if (temp != 0) {
-		GT_REG_WRITE (MV64360_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64360_CUNIT_SIZE0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-	} else {
-		/* An invalid size was specified */
-		return false;
-	}
-	return true;
-}
diff --git a/board/Marvell/db64360/mpsc.h b/board/Marvell/db64360/mpsc.h
deleted file mode 100644
index f95f8c0f47..0000000000
--- a/board/Marvell/db64360/mpsc.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include "../include/mv_gen_reg.h"
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_sdma_init(void);
-void mpsc_init2(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-char mpsc_getchar_debug(void);
-int mpsc_test_char_debug(void);
-
-int mpsc_test_char_sdma(void);
-
-extern int (*mpsc_putchar)(char ch);
-extern char (*mpsc_getchar)(void);
-extern int (*mpsc_test_char)(void);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC     5
-#define RX_DESC     20
-
-#define DESC_FIRST  0x00010000
-#define DESC_LAST   0x00020000
-#define DESC_OWNER_BIT  0x80000000
-
-#define TX_DEMAND   0x00800000
-#define TX_STOP     0x00010000
-#define RX_ENABLE   0x00000080
-
-#define SDMA_RX_ABORT 		  (1 << 15)
-#define SDMA_TX_ABORT 		  (1 << 31)
-#define MPSC_TX_ABORT 		  (1 << 7)
-#define MPSC_RX_ABORT             (1 << 23)
-#define MPSC_ENTER_HUNT           (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT            0x1
-#define GALMPSC_DISCONNECT         0x0
-
-#define GALMPSC_UART               0x1
-
-#define GALMPSC_STOP_BITS_1        0x0
-#define GALMPSC_STOP_BITS_2        0x1
-#define GALMPSC_CHAR_LENGTH_8      0x3
-#define GALMPSC_CHAR_LENGTH_7      0x2
-
-#define GALMPSC_PARITY_ODD         0x0
-#define GALMPSC_PARITY_EVEN        0x2
-#define GALMPSC_PARITY_MARK        0x3
-#define GALMPSC_PARITY_SPACE       0x1
-#define GALMPSC_PARITY_NONE        -1
-
-#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
-#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
-#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
-#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
-
-#define GALMPSC_REG_GAP            0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
-#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
-#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
-#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
-#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
-#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
-#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
-#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
-#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST     (1 << 16)
-#define GALSDMA_COMMAND_LAST      (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO      (1 << 30)
-#define GALSDMA_COMMAND_OWNER     (1 << 31)
-
-#define GALSDMA_RX                 0
-#define GALSDMA_TX                 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
-#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
-#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
-#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
-#define GALSDMA_REG_DIFF           0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
-#define GALMPSC_0_INT_CAUSE        0xb804
-#define GALMPSC_0_INT_MASK         0xb884
-
-#define GALSDMA_MODE_UART          0
-#define GALSDMA_MODE_BISYNC        1
-#define GALSDMA_MODE_HDLC          2
-#define GALSDMA_MODE_TRANSPARENT   3
-
-#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
-#define GALBRG_REG_GAP             0x0008
-#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
-
-#endif /* __MPSC_H__ */
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
deleted file mode 100644
index e4e64e48f0..0000000000
--- a/board/Marvell/db64360/mv_eth.c
+++ /dev/null
@@ -1,2780 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.c - header file for the polled mode GT ethernet driver
- */
-#include <common.h>
-#include <net.h>
-#include <malloc.h>
-
-#include "mv_eth.h"
-
-/* enable Debug outputs */
-
-#undef DEBUG_MV_ETH
-
-#ifdef DEBUG_MV_ETH
-#define DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-#undef MV64360_CHECKSUM_OFFLOAD
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-/* Definition for configuring driver */
-/* #define UPDATE_STATS_BY_SOFTWARE */
-#undef MV64360_RX_QUEUE_FILL_ON_TASK
-
-
-/* Constants */
-#define MAGIC_ETH_RUNNING		8031971
-#define MV64360_INTERNAL_SRAM_SIZE                      _256K
-#define EXTRA_BYTES 32
-#define WRAP       ETH_HLEN + 2 + 4 + 16
-#define BUFFER_MTU dev->mtu + WRAP
-#define INT_CAUSE_UNMASK_ALL		0x0007ffff
-#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
-#ifdef MV64360_RX_FILL_ON_TASK
-#define INT_CAUSE_MASK_ALL		0x00000000
-#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
-#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
-#endif
-
-/* Read/Write to/from MV64360 internal registers */
-#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
-#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
-#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
-#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
-
-/* Static function declarations */
-static int mv64360_eth_real_open (struct eth_device *eth);
-static int mv64360_eth_real_stop (struct eth_device *eth);
-static struct net_device_stats *mv64360_eth_get_stats (struct eth_device
-						       *dev);
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
-static void mv64360_eth_update_stat (struct eth_device *dev);
-bool db64360_eth_start (struct eth_device *eth);
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset);
-int mv64360_eth_receive (struct eth_device *dev);
-
-int mv64360_eth_xmit (struct eth_device *, volatile void *packet, int length);
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-static void mv64360_eth_print_stat (struct eth_device *dev);
-#endif
-/* Processes a received packet */
-extern void NetReceive (volatile uchar *, int);
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-/*************************************************
- *Helper functions - used inside the driver only *
- *************************************************/
-#ifdef DEBUG_MV_ETH
-void print_globals (struct eth_device *dev)
-{
-	printf ("Ethernet PRINT_Globals-Debug function\n");
-	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
-		(unsigned int) dev->priv);
-	printf ("Base Address for mv64360_eth_priv:	%08x\n",
-		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
-				 port_private));
-
-	printf ("GT Internal Base Address:	%08x\n",
-		INTERNAL_REG_BASE_ADDR);
-	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64360_TX_QUEUE_SIZE);
-	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64360_RX_QUEUE_SIZE);
-	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_rx_buffer_base[0],
-		(MV64360_RX_QUEUE_SIZE * MV64360_RX_BUFFER_SIZE) + 32);
-	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_tx_buffer_base[0],
-		(MV64360_TX_QUEUE_SIZE * MV64360_TX_BUFFER_SIZE) + 32);
-}
-#endif
-
-#define my_cpu_to_le32(x) my_le32_to_cpu((x))
-
-unsigned long my_le32_to_cpu (unsigned long x)
-{
-	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) << 8) |
-		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
-}
-
-
-/**********************************************************************
- * mv64360_eth_print_phy_status
- *
- * Prints gigabit ethenret phy status
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_print_phy_status (struct eth_device *dev)
-{
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	unsigned int port_status, phy_reg_data;
-
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		printf ("Ethernet port changed link status to DOWN\n");
-	} else {
-		port_status =
-			MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
-		printf ("Ethernet status port %d: Link up", port_num);
-		printf (", %s",
-			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
-		if (port_status & BIT4)
-			printf (", Speed 1 Gbps");
-		else
-			printf (", %s",
-				(port_status & BIT5) ? "Speed 100 Mbps" :
-				"Speed 10 Mbps");
-		printf ("\n");
-	}
-}
-
-/**********************************************************************
- * u-boot entry functions for mv64360_eth
- *
- **********************************************************************/
-int db64360_eth_probe (struct eth_device *dev)
-{
-	return ((int) db64360_eth_start (dev));
-}
-
-int db64360_eth_poll (struct eth_device *dev)
-{
-	return mv64360_eth_receive (dev);
-}
-
-int db64360_eth_transmit (struct eth_device *dev, volatile void *packet,
-			  int length)
-{
-	mv64360_eth_xmit (dev, packet, length);
-	return 0;
-}
-
-void db64360_eth_disable (struct eth_device *dev)
-{
-	mv64360_eth_stop (dev);
-}
-
-
-void mv6436x_eth_initialize (bd_t * bis)
-{
-	struct eth_device *dev;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	int devnum, x, temp;
-	char *s, *e, buf[64];
-
-	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
-		dev = calloc (sizeof (*dev), 1);
-		if (!dev) {
-			printf ("%s: mv_enet%d allocation failure, %s\n",
-				__FUNCTION__, devnum, "eth_device structure");
-			return;
-		}
-
-		/* must be less than NAMESIZE (16) */
-		sprintf (dev->name, "mv_enet%d", devnum);
-
-#ifdef DEBUG
-		printf ("Initializing %s\n", dev->name);
-#endif
-
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-		/* ronen - set the MAC addr in the HW */
-		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
-
-		dev->init = (void *) db64360_eth_probe;
-		dev->halt = (void *) ethernet_phy_reset;
-		dev->send = (void *) db64360_eth_transmit;
-		dev->recv = (void *) db64360_eth_poll;
-
-		ethernet_private = calloc (sizeof (*ethernet_private), 1);
-		dev->priv = (void *) ethernet_private;
-
-		if (!ethernet_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Private Device Structure");
-			free (dev);
-			return;
-		}
-		/* start with an zeroed ETH_PORT_INFO */
-		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
-		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-		/* set pointer to memory for stats data structure etc... */
-		port_private = calloc (sizeof (*ethernet_private), 1);
-		ethernet_private->port_private = (void *)port_private;
-		if (!port_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Port Private Device Structure");
-
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-
-		port_private->stats =
-			calloc (sizeof (struct net_device_stats), 1);
-		if (!port_private->stats) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Net stat Structure");
-
-			free (port_private);
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-		memset (ethernet_private->port_private, 0,
-			sizeof (struct mv64360_eth_priv));
-		switch (devnum) {
-		case 0:
-			ethernet_private->port_num = ETH_0;
-			break;
-		case 1:
-			ethernet_private->port_num = ETH_1;
-			break;
-		case 2:
-			ethernet_private->port_num = ETH_2;
-			break;
-		default:
-			printf ("Invalid device number %d\n", devnum);
-			break;
-		};
-
-		port_private->port_num = devnum;
-		/*
-		 * Read MIB counter on the GT in order to reset them,
-		 * then zero all the stats fields in memory
-		 */
-		mv64360_eth_update_stat (dev);
-		memset (port_private->stats, 0,
-			sizeof (struct net_device_stats));
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-
-		DP (printf ("Allocating descriptor and buffer rings\n"));
-
-		ethernet_private->p_rx_desc_area_base[0] =
-			(ETH_RX_DESC *) memalign (16,
-						  RX_DESC_ALIGNED_SIZE *
-						  MV64360_RX_QUEUE_SIZE + 1);
-		ethernet_private->p_tx_desc_area_base[0] =
-			(ETH_TX_DESC *) memalign (16,
-						  TX_DESC_ALIGNED_SIZE *
-						  MV64360_TX_QUEUE_SIZE + 1);
-
-		ethernet_private->p_rx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64360_RX_QUEUE_SIZE *
-					   MV64360_TX_BUFFER_SIZE + 1);
-		ethernet_private->p_tx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64360_RX_QUEUE_SIZE *
-					   MV64360_TX_BUFFER_SIZE + 1);
-
-#ifdef DEBUG_MV_ETH
-		/* DEBUG OUTPUT prints adresses of globals */
-		print_globals (dev);
-#endif
-		eth_register (dev);
-
-	}
-	DP (printf ("%s: exit\n", __FUNCTION__));
-
-}
-
-/**********************************************************************
- * mv64360_eth_open
- *
- * This function is called when openning the network device. The function
- * should initialize all the hardware, initialize cyclic Rx/Tx
- * descriptors chain and buffers and allocate an IRQ to the network
- * device.
- *
- * Input : a pointer to the network device structure
- * / / ronen - changed the output to match  net/eth.c needs
- * Output : nonzero of success , zero if fails.
- * under construction
- **********************************************************************/
-
-int mv64360_eth_open (struct eth_device *dev)
-{
-	return (mv64360_eth_real_open (dev));
-}
-
-/* Helper function for mv64360_eth_open */
-static int mv64360_eth_real_open (struct eth_device *dev)
-{
-
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	u32 port_status, phy_reg_data;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	/* ronen - when we update the MAC env params we only update dev->enetaddr
-	   see ./net/eth.c eth_set_enetaddr() */
-	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Clear the ethernet port interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-
-	/* Unmask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL);
-
-	/* Unmask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL_EXT);
-
-	/* Set phy address of the port */
-	ethernet_private->port_phy_addr = 0x8 + port_num;
-
-	/* Activate the DMA channels etc */
-	eth_port_init (ethernet_private);
-
-
-	/* "Allocate" setup TX rings */
-
-	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		port_private->tx_ring_size[queue] = MV64360_TX_QUEUE_SIZE;
-		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
-		ethernet_private->tx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
-			0, ethernet_private->tx_desc_area_size[queue]);
-
-		/* initialize tx desc ring with low level driver */
-		if (ether_init_tx_desc_ring
-		    (ethernet_private, ETH_Q0,
-		     port_private->tx_ring_size[queue],
-		     MV64360_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		     (unsigned int) ethernet_private->
-		     p_tx_desc_area_base[queue],
-		     (unsigned int) ethernet_private->
-		     p_tx_buffer_base[queue]) == false)
-			printf ("### Error initializing TX Ring\n");
-	}
-
-	/* "Allocate" setup RX rings */
-	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		/* Meantime RX Ring are fixed - but must be configurable by user */
-		port_private->rx_ring_size[queue] = MV64360_RX_QUEUE_SIZE;
-		size = (port_private->rx_ring_size[queue] *
-			RX_DESC_ALIGNED_SIZE);
-		ethernet_private->rx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
-			0, ethernet_private->rx_desc_area_size[queue]);
-		if ((ether_init_rx_desc_ring
-		     (ethernet_private, ETH_Q0,
-		      port_private->rx_ring_size[queue],
-		      MV64360_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		      (unsigned int) ethernet_private->
-		      p_rx_desc_area_base[queue],
-		      (unsigned int) ethernet_private->
-		      p_rx_buffer_base[queue])) == false)
-			printf ("### Error initializing RX Ring\n");
-	}
-
-	eth_port_start (ethernet_private);
-
-	/* Set maximum receive buffer to 9700 bytes */
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num),
-		      (0x5 << 17) |
-		      (MV_REG_READ
-		       (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num))
-		       & 0xfff1ffff));
-
-	/*
-	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
-	 * disable the leaky bucket mechanism .
-	 */
-
-	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
-	port_status = MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		/* Reset PHY */
-		if ((ethernet_phy_reset (port_num)) != true) {
-			printf ("$$ Warnning: No link on port %d \n",
-				port_num);
-			return 0;
-		} else {
-			eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-			if (!(phy_reg_data & 0x20)) {
-				printf ("### Error: Phy is not active\n");
-				return 0;
-			}
-		}
-	} else {
-		mv64360_eth_print_phy_status (dev);
-	}
-	port_private->eth_running = MAGIC_ETH_RUNNING;
-	return 1;
-}
-
-
-static int mv64360_eth_free_tx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop Tx Queues */
-	MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free TX rings */
-	DP (printf ("Clearing previously allocated TX queues... "));
-	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
-		/* Free on TX rings */
-		for (p_tx_curr_desc =
-		     ethernet_private->p_tx_desc_area_base[queue];
-		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
-		      ethernet_private->p_tx_desc_area_base[queue] +
-		      ethernet_private->tx_desc_area_size[queue]);
-		     p_tx_curr_desc =
-		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
-				      TX_DESC_ALIGNED_SIZE)) {
-			/* this is inside for loop */
-			if (p_tx_curr_desc->return_info != 0) {
-				p_tx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-static int mv64360_eth_free_rx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free RX rings */
-	DP (printf ("Clearing previously allocated RX queues... "));
-	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
-		/* Free preallocated skb's on RX rings */
-		for (p_rx_curr_desc =
-		     ethernet_private->p_rx_desc_area_base[queue];
-		     (((unsigned int) p_rx_curr_desc <
-		       ((unsigned int) ethernet_private->
-			p_rx_desc_area_base[queue] +
-			ethernet_private->rx_desc_area_size[queue])));
-		     p_rx_curr_desc =
-		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
-				      RX_DESC_ALIGNED_SIZE)) {
-			if (p_rx_curr_desc->return_info != 0) {
-				p_rx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-/**********************************************************************
- * mv64360_eth_stop
- *
- * This function is used when closing the network device.
- * It updates the hardware,
- * release all memory that holds buffers and descriptors and release the IRQ.
- * Input : a pointer to the device structure
- * Output : zero if success , nonzero if fails
- *********************************************************************/
-
-int mv64360_eth_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Disable all gigE address decoder */
-	MV_REG_WRITE (MV64360_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
-	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
-	mv64360_eth_real_stop (dev);
-
-	return 0;
-};
-
-/* Helper function for mv64360_eth_stop */
-
-static int mv64360_eth_real_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	mv64360_eth_free_tx_rings (dev);
-	mv64360_eth_free_rx_rings (dev);
-
-	eth_port_reset (ethernet_private->port_num);
-	/* Disable ethernet port interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-	/* Mask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num), 0);
-	/* Mask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
-	MV_RESET_REG_BITS (MV64360_CPU_INTERRUPT0_MASK_HIGH,
-			   BIT0 << port_num);
-	/* Print Network statistics */
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-	/*
-	 * Print statistics (only if ethernet is running),
-	 * then zero all the stats fields in memory
-	 */
-	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
-		port_private->eth_running = 0;
-		mv64360_eth_print_stat (dev);
-	}
-	memset (port_private->stats, 0, sizeof (struct net_device_stats));
-#endif
-	DP (printf ("\nEthernet stopped ... \n"));
-	return 0;
-}
-
-
-/**********************************************************************
- * mv64360_eth_start_xmit
- *
- * This function is queues a packet in the Tx descriptor for
- * required port.
- *
- * Input : skb - a pointer to socket buffer
- *         dev - a pointer to the required port
- *
- * Output : zero upon success
- **********************************************************************/
-
-int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
-		      int dataSize)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	ETH_FUNC_RET_STATUS status;
-	struct net_device_stats *stats;
-	ETH_FUNC_RET_STATUS release_result;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	stats = port_private->stats;
-
-	/* Update packet info data structure */
-	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
-	pkt_info.byte_cnt = dataSize;
-	pkt_info.buf_ptr = (unsigned int) dataPtr;
-	pkt_info.return_info = 0;
-
-	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
-	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
-		printf ("Error on transmitting packet ..");
-		if (status == ETH_QUEUE_FULL)
-			printf ("ETH Queue is full. \n");
-		if (status == ETH_QUEUE_LAST_RESOURCE)
-			printf ("ETH Queue: using last available resource. \n");
-		goto error;
-	}
-
-	/* Update statistics and start of transmittion time */
-	stats->tx_bytes += dataSize;
-	stats->tx_packets++;
-
-	/* Check if packet(s) is(are) transmitted correctly (release everything) */
-	do {
-		release_result =
-			eth_tx_return_desc (ethernet_private, ETH_Q0,
-					    &pkt_info);
-		switch (release_result) {
-		case ETH_OK:
-			DP (printf ("descriptor released\n"));
-			if (pkt_info.cmd_sts & BIT0) {
-				printf ("Error in TX\n");
-				stats->tx_errors++;
-
-			}
-			break;
-		case ETH_RETRY:
-			DP (printf ("transmission still in process\n"));
-			break;
-
-		case ETH_ERROR:
-			printf ("routine can not access Tx desc ring\n");
-			break;
-
-		case ETH_END_OF_JOB:
-			DP (printf ("the routine has nothing to release\n"));
-			break;
-		default:	/* should not happen */
-			break;
-		}
-	} while (release_result == ETH_OK);
-
-
-	return 0;		/* success */
-      error:
-	return 1;		/* Failed - higher layers will free the skb */
-}
-
-/**********************************************************************
- * mv64360_eth_receive
- *
- * This function is forward packets that are received from the port's
- * queues toward kernel core or FastRoute them to another interface.
- *
- * Input : dev - a pointer to the required interface
- *         max - maximum number to receive (0 means unlimted)
- *
- * Output : number of served packets
- **********************************************************************/
-
-int mv64360_eth_receive (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	struct net_device_stats *stats;
-
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
-		ETH_OK)) {
-
-#ifdef DEBUG_MV_ETH
-		if (pkt_info.byte_cnt != 0) {
-			printf ("%s: Received %d byte Packet @ 0x%x\n",
-				__FUNCTION__, pkt_info.byte_cnt,
-				pkt_info.buf_ptr);
-		}
-#endif
-		/* Update statistics. Note byte count includes 4 byte CRC count */
-		stats->rx_packets++;
-		stats->rx_bytes += pkt_info.byte_cnt;
-
-		/*
-		 * In case received a packet without first / last bits on OR the error
-		 * summary bit is on, the packets needs to be dropeed.
-		 */
-		if (((pkt_info.
-		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
-		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
-		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
-			stats->rx_dropped++;
-
-			printf ("Received packet spread on multiple descriptors\n");
-
-			/* Is this caused by an error ? */
-			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
-				stats->rx_errors++;
-			}
-
-			/* free these descriptors again without forwarding them to the higher layers */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-			/* /free these descriptors again */
-		} else {
-
-/* !!! call higher layer processing */
-#ifdef DEBUG_MV_ETH
-			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
-#endif
-			/* let the upper layer handle the packet */
-			NetReceive ((uchar *) pkt_info.buf_ptr,
-				    (int) pkt_info.byte_cnt);
-
-/* **************************************************************** */
-/* free descriptor  */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-			DP (printf
-			    ("RX: pkt_info.buf_ptr =	%x\n",
-			     pkt_info.buf_ptr));
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-
-/* **************************************************************** */
-
-		}
-	}
-	mv64360_eth_get_stats (dev);	/* update statistics */
-	return 1;
-}
-
-/**********************************************************************
- * mv64360_eth_get_stats
- *
- * Returns a pointer to the interface statistics.
- *
- * Input : dev - a pointer to the required interface
- *
- * Output : a pointer to the interface's statistics
- **********************************************************************/
-
-static struct net_device_stats *mv64360_eth_get_stats (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	mv64360_eth_update_stat (dev);
-
-	return port_private->stats;
-}
-
-
-/**********************************************************************
- * mv64360_eth_update_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_update_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-	volatile unsigned int dummy;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	stats->rx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_RECEIVED);
-	stats->tx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_SENT);
-	stats->rx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
-	/*
-	 * Ideally this should be as follows -
-	 *
-	 *   stats->rx_bytes   += stats->rx_bytes +
-	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
-	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
-	 *
-	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
-	 * is just a dummy read for proper work of the GigE port
-	 */
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
-	stats->tx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
-	stats->rx_errors += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MAC_RECEIVE_ERROR);
-
-	/* Rx dropped is for received packet with CRC error */
-	stats->rx_dropped +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_BAD_CRC_EVENT);
-	stats->multicast += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
-	stats->collisions +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_COLLISION) +
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_LATE_COLLISION);
-	/* detailed rx errors */
-	stats->rx_length_errors +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_UNDERSIZE_RECEIVED)
-		+
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_OVERSIZE_RECEIVED);
-	/* detailed tx errors */
-}
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-/**********************************************************************
- * mv64360_eth_print_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_print_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	printf ("\n### Network statistics: ###\n");
-	printf ("--------------------------\n");
-	printf (" Packets received:		%ld\n", stats->rx_packets);
-	printf (" Packets send:			%ld\n", stats->tx_packets);
-	printf (" Received bytes:		%ld\n", stats->rx_bytes);
-	printf (" Send bytes:			%ld\n", stats->tx_bytes);
-	if (stats->rx_errors != 0)
-		printf (" Rx Errors:			%ld\n",
-			stats->rx_errors);
-	if (stats->rx_dropped != 0)
-		printf (" Rx dropped (CRC Errors):	%ld\n",
-			stats->rx_dropped);
-	if (stats->multicast != 0)
-		printf (" Rx mulicast frames:		%ld\n",
-			stats->multicast);
-	if (stats->collisions != 0)
-		printf (" No. of collisions:		%ld\n",
-			stats->collisions);
-	if (stats->rx_length_errors != 0)
-		printf (" Rx length errors:		%ld\n",
-			stats->rx_length_errors);
-}
-#endif
-
-/**************************************************************************
- *network_start - Network Kick Off Routine UBoot
- *Inputs :
- *Outputs :
- **************************************************************************/
-
-bool db64360_eth_start (struct eth_device *dev)
-{
-	return (mv64360_eth_open (dev));	/* calls real open */
-}
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-/*
- * based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-/********************************************************************************
- * Marvell's Gigabit Ethernet controller low level driver
- *
- * DESCRIPTION:
- *       This file introduce low level API to Marvell's Gigabit Ethernet
- *		controller. This Gigabit Ethernet Controller driver API controls
- *		1) Operations (i.e. port init, start, reset etc').
- *		2) Data flow (i.e. port send, receive etc').
- *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
- *		struct.
- *		This struct includes user configuration information as well as
- *		driver internal data needed for its operations.
- *
- *		Supported Features:
- *		- This low level driver is OS independent. Allocating memory for
- *		  the descriptor rings and buffers are not within the scope of
- *		  this driver.
- *		- The user is free from Rx/Tx queue managing.
- *		- This low level driver introduce functionality API that enable
- *		  the to operate Marvell's Gigabit Ethernet Controller in a
- *		  convenient way.
- *		- Simple Gigabit Ethernet port operation API.
- *		- Simple Gigabit Ethernet port data flow API.
- *		- Data flow and operation API support per queue functionality.
- *		- Support cached descriptors for better performance.
- *		- Enable access to all four DRAM banks and internal SRAM memory
- *		  spaces.
- *		- PHY access and control API.
- *		- Port control register configuration API.
- *		- Full control over Unicast and Multicast MAC configurations.
- *
- *		Operation flow:
- *
- *		Initialization phase
- *		This phase complete the initialization of the ETH_PORT_INFO
- *		struct.
- *		User information regarding port configuration has to be set
- *		prior to calling the port initialization routine. For example,
- *		the user has to assign the port_phy_addr field which is board
- *		depended parameter.
- *		In this phase any port Tx/Rx activity is halted, MIB counters
- *		are cleared, PHY address is set according to user parameter and
- *		access to DRAM and internal SRAM memory spaces.
- *
- *		Driver ring initialization
- *		Allocating memory for the descriptor rings and buffers is not
- *		within the scope of this driver. Thus, the user is required to
- *		allocate memory for the descriptors ring and buffers. Those
- *		memory parameters are used by the Rx and Tx ring initialization
- *		routines in order to curve the descriptor linked list in a form
- *		of a ring.
- *		Note: Pay special attention to alignment issues when using
- *		cached descriptors/buffers. In this phase the driver store
- *		information in the ETH_PORT_INFO struct regarding each queue
- *		ring.
- *
- *		Driver start
- *		This phase prepares the Ethernet port for Rx and Tx activity.
- *		It uses the information stored in the ETH_PORT_INFO struct to
- *		initialize the various port registers.
- *
- *		Data flow:
- *		All packet references to/from the driver are done using PKT_INFO
- *		struct.
- *		This struct is a unified struct used with Rx and Tx operations.
- *		This way the user is not required to be familiar with neither
- *		Tx nor Rx descriptors structures.
- *		The driver's descriptors rings are management by indexes.
- *		Those indexes controls the ring resources and used to indicate
- *		a SW resource error:
- *		'current'
- *		This index points to the current available resource for use. For
- *		example in Rx process this index will point to the descriptor
- *		that will be passed to the user upon calling the receive routine.
- *		In Tx process, this index will point to the descriptor
- *		that will be assigned with the user packet info and transmitted.
- *		'used'
- *		This index points to the descriptor that need to restore its
- *		resources. For example in Rx process, using the Rx buffer return
- *		API will attach the buffer returned in packet info to the
- *		descriptor pointed by 'used'. In Tx process, using the Tx
- *		descriptor return will merely return the user packet info with
- *		the command status of  the transmitted buffer pointed by the
- *		'used' index. Nevertheless, it is essential to use this routine
- *		to update the 'used' index.
- *		'first'
- *		This index supports Tx Scatter-Gather. It points to the first
- *		descriptor of a packet assembled of multiple buffers. For example
- *		when in middle of Such packet we have a Tx resource error the
- *		'curr' index get the value of 'first' to indicate that the ring
- *		returned to its state before trying to transmit this packet.
- *
- *		Receive operation:
- *		The eth_port_receive API set the packet information struct,
- *		passed by the caller, with received information from the
- *		'current' SDMA descriptor.
- *		It is the user responsibility to return this resource back
- *		to the Rx descriptor ring to enable the reuse of this source.
- *		Return Rx resource is done using the eth_rx_return_buff API.
- *
- *		Transmit operation:
- *		The eth_port_send API supports Scatter-Gather which enables to
- *		send a packet spanned over multiple buffers. This means that
- *		for each packet info structure given by the user and put into
- *		the Tx descriptors ring, will be transmitted only if the 'LAST'
- *		bit will be set in the packet info command status field. This
- *		API also consider restriction regarding buffer alignments and
- *		sizes.
- *		The user must return a Tx resource after ensuring the buffer
- *		has been transmitted to enable the Tx ring indexes to update.
- *
- *		BOARD LAYOUT
- *		This device is on-board.  No jumper diagram is necessary.
- *
- *		EXTERNAL INTERFACE
- *
- *       Prior to calling the initialization routine eth_port_init() the user
- *	 must set the following fields under ETH_PORT_INFO struct:
- *       port_num             User Ethernet port number.
- *       port_phy_addr		    User PHY address of Ethernet port.
- *       port_mac_addr[6]	    User defined port MAC address.
- *       port_config          User port configuration value.
- *       port_config_extend    User port config extend value.
- *       port_sdma_config      User port SDMA config value.
- *       port_serial_control   User port serial control value.
- *       *port_virt_to_phys ()  User function to cast virtual addr to CPU bus addr.
- *       *port_private        User scratch pad for user specific data structures.
- *
- *       This driver introduce a set of default values:
- *       PORT_CONFIG_VALUE           Default port configuration value
- *       PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
- *       PORT_SDMA_CONFIG_VALUE      Default sdma control value
- *       PORT_SERIAL_CONTROL_VALUE   Default port serial control value
- *
- *		This driver data flow is done using the PKT_INFO struct which is
- *		a unified struct for Rx and Tx operations:
- *		byte_cnt	Tx/Rx descriptor buffer byte count.
- *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
- *		cmd_sts		Tx/Rx descriptor command status.
- *		buf_ptr		Tx/Rx descriptor buffer pointer.
- *		return_info	Tx/Rx user resource return information.
- *
- *
- *		EXTERNAL SUPPORT REQUIREMENTS
- *
- *		This driver requires the following external support:
- *
- *		D_CACHE_FLUSH_LINE (address, address offset)
- *
- *		This macro applies assembly code to flush and invalidate cache
- *		line.
- *		address        - address base.
- *		address offset - address offset
- *
- *
- *		CPU_PIPE_FLUSH
- *
- *		This macro applies assembly code to flush the CPU pipeline.
- *
- *******************************************************************************/
-/* includes */
-
-/* defines */
-/* SDMA command macros */
-#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
-
-#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
- (1 << (8 + tx_queue)))
-
-#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
-
-#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
-
-#define CURR_RFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
-
-#define CURR_RFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_RFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
-
-#define USED_RFD_SET(p_used_desc, queue)\
-(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
-
-
-#define CURR_TFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
-
-#define CURR_TFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_TFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
-
-#define USED_TFD_SET(p_used_desc, queue) \
- (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
-
-#define FIRST_TFD_GET(p_first_desc, queue) \
- ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
-
-#define FIRST_TFD_SET(p_first_desc, queue) \
- (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
-
-
-/* Macros that save access to desc in order to find next desc pointer  */
-#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
-
-#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
-
-#define LINK_UP_TIMEOUT		100000
-#define PHY_BUSY_TIMEOUT    10000000
-
-/* locals */
-
-/* PHY routines */
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
-static int ethernet_phy_get (ETH_PORT eth_port_num);
-
-/* Ethernet Port routines */
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param);
-static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option);
-
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count);
-
-void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
-
-
-typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
-u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64360_CS_0_BASE_ADDR);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64360_CS_1_BASE_ADDR);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64360_CS_2_BASE_ADDR);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64360_CS_3_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_dram_bank_size (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64360_CS_0_SIZE);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64360_CS_1_SIZE);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64360_CS_2_SIZE);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64360_CS_3_SIZE);
-	result += 1;
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_internal_sram_base (void)
-{
-	u32 result;
-
-	result = MV_REG_READ (MV64360_INTEGRATED_SRAM_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-/*******************************************************************************
-* eth_port_init - Initialize the Ethernet port driver
-*
-* DESCRIPTION:
-*       This function prepares the ethernet port to start its activity:
-*       1) Completes the ethernet port driver struct initialization toward port
-*           start routine.
-*       2) Resets the device to a quiescent state in case of warm reboot.
-*       3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
-*       4) Clean MAC tables. The reset status of those tables is unknown.
-*       5) Set PHY address.
-*       Note: Call this routine prior to eth_port_start routine and after setting
-*       user values in the user fields of Ethernet port control struct (i.e.
-*       port_phy_addr).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       See description.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	ETH_WIN_PARAM win_param;
-
-	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
-	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
-	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
-	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
-
-	p_eth_port_ctrl->port_rx_queue_command = 0;
-	p_eth_port_ctrl->port_tx_queue_command = 0;
-
-	/* Zero out SW structs */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->rx_resource_err[queue] = false;
-	}
-
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->tx_resource_err[queue] = false;
-	}
-
-	eth_port_reset (p_eth_port_ctrl->port_num);
-
-	/* Set access parameters for DRAM bank 0 */
-	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR  */
-	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
-	win_param.size = mv_get_dram_bank_size (BANK0);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 1 */
-	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
-	win_param.size = mv_get_dram_bank_size (BANK1);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 2 */
-	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
-	win_param.size = mv_get_dram_bank_size (BANK2);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 3 */
-	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
-	win_param.size = mv_get_dram_bank_size (BANK3);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for Internal SRAM */
-	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
-	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
-	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
-	win_param.high_addr = 0;
-	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
-	win_param.size = MV64360_INTERNAL_SRAM_SIZE;	/* Get bank size */
-	win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
-
-	ethernet_phy_set (p_eth_port_ctrl->port_num,
-			  p_eth_port_ctrl->port_phy_addr);
-
-	return;
-
-}
-
-/*******************************************************************************
-* eth_port_start - Start the Ethernet port activity.
-*
-* DESCRIPTION:
-*       This routine prepares the Ethernet port for Rx and Tx activity:
-*       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
-*           has been initialized a descriptor's ring (using ether_init_tx_desc_ring
-*           for Tx and ether_init_rx_desc_ring for Rx)
-*       2. Initialize and enable the Ethernet configuration port by writing to
-*           the port's configuration and command registers.
-*       3. Initialize and enable the SDMA by writing to the SDMA's
-*    configuration and command registers.
-*       After completing these steps, the ethernet port SDMA can starts to
-*       perform Rx and Tx activities.
-*
-*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
-*       to calling this function (use ether_init_tx_desc_ring for Tx queues and
-*       ether_init_rx_desc_ring for Rx queues).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       Ethernet port is ready to receive and transmit.
-*
-* RETURN:
-*       false if the port PHY is not up.
-*       true otherwise.
-*
-*******************************************************************************/
-static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	unsigned int phy_reg_data;
-	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
-
-
-	/* Assignment of Tx CTRP of given queue */
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_GET (p_tx_curr_desc, queue);
-		MV_REG_WRITE ((MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_tx_curr_desc));
-
-	}
-
-	/* Assignment of Rx CRDP of given queue */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_GET (p_rx_curr_desc, queue);
-		MV_REG_WRITE ((MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_rx_curr_desc));
-
-		if (p_rx_curr_desc != NULL)
-			/* Add the assigned Ethernet address to the port's address table */
-			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
-					      p_eth_port_ctrl->port_mac_addr,
-					      queue);
-	}
-
-	/* Assign port configuration and command. */
-	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config);
-
-	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config_extend);
-
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      p_eth_port_ctrl->port_serial_control);
-
-	MV_SET_REG_BITS (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-			 ETH_SERIAL_PORT_ENABLE);
-
-	/* Assign port SDMA configuration */
-	MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_sdma_config);
-
-	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
-		      (eth_port_num), 0x3fffffff);
-	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
-		      (eth_port_num), 0x03fffcff);
-	/* Turn off the port/queue bandwidth limitation */
-	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
-
-	/* Enable port Rx. */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_rx_queue_command);
-
-	/* Check if link is up */
-	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-	if (!(phy_reg_data & 0x20))
-		return false;
-
-	return true;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr_set - This function Set the port Unicast address.
-*
-* DESCRIPTION:
-*		This function Set the port Ethernet MAC address.
-*
-* INPUT:
-*	ETH_PORT eth_port_num     Port number.
-*	char *        p_addr		Address to be set
-*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
-*
-* OUTPUT:
-*	Set MAC address low and high registers. also calls eth_port_uc_addr()
-*       To set the unicast table with the proper information.
-*
-* RETURN:
-*	N/A.
-*
-*******************************************************************************/
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr, ETH_QUEUE queue)
-{
-	unsigned int mac_h;
-	unsigned int mac_l;
-
-	mac_l = (p_addr[4] << 8) | (p_addr[5]);
-	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
-		(p_addr[2] << 8) | (p_addr[3] << 0);
-
-	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
-	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
-
-	/* Accept frames of this address */
-	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
-
-	return;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr - This function Set the port unicast address table
-*
-* DESCRIPTION:
-*	This function locates the proper entry in the Unicast table for the
-*	specified MAC nibble and sets its properties according to function
-*	parameters.
-*
-* INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char uc_nibble		Unicast MAC Address last nibble.
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
-*
-* OUTPUT:
-*	This function add/removes MAC addresses from the port unicast address
-*	table.
-*
-* RETURN:
-*	true is output succeeded.
-*	false if option parameter is invalid.
-*
-*******************************************************************************/
-static bool eth_port_uc_addr (ETH_PORT eth_port_num,
-			      unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option)
-{
-	unsigned int unicast_reg;
-	unsigned int tbl_offset;
-	unsigned int reg_offset;
-
-	/* Locate the Unicast table entry */
-	uc_nibble = (0xf & uc_nibble);
-	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
-	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
-
-	switch (option) {
-	case REJECT_MAC_ADDR:
-		/* Clear accepts frame bit at specified unicast DA table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg &= (0x0E << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-		break;
-
-	case ACCEPT_MAC_ADDR:
-		/* Set accepts frame bit at unicast DA filter table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-
-		break;
-
-	default:
-		return false;
-	}
-	return true;
-}
-
-
-/*******************************************************************************
-* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
-*
-* DESCRIPTION:
-*       Go through all the DA filter tables (Unicast, Special Multicast & Other
-*       Multicast) and set each entry to 0.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Multicast and Unicast packets are rejected.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
-{
-	int table_index;
-
-	/* Clear DA filter unicast table (Ex_dFUT) */
-	for (table_index = 0; table_index <= 0xC; table_index += 4)
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num) + table_index), 0);
-
-	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
-		/* Clear DA filter special multicast table (Ex_dFSMT) */
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-		/* Clear DA filter other multicast table (Ex_dFOMT) */
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-	}
-}
-
-/*******************************************************************************
-* eth_clear_mib_counters - Clear all MIB counters
-*
-* DESCRIPTION:
-*       This function clears all MIB counters of a specific ethernet port.
-*       A read from the MIB counter will reset the counter.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       After reading all MIB counters, the counters resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-static void eth_clear_mib_counters (ETH_PORT eth_port_num)
-{
-	int i;
-	unsigned int dummy;
-
-	/* Perform dummy reads from MIB counters */
-	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
-	     i += 4)
-		dummy = MV_REG_READ ((MV64360_ETH_MIB_COUNTERS_BASE
-				      (eth_port_num) + i));
-
-	return;
-}
-
-/*******************************************************************************
-* eth_read_mib_counter - Read a MIB counter
-*
-* DESCRIPTION:
-*       This function reads a MIB counter of a specific ethernet port.
-*       NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
-*       following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
-*       register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
-*       ETH_MIB_GOOD_OCTETS_SENT_HIGH
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*       unsigned int mib_offset   MIB counter offset (use ETH_MIB_... macros).
-*
-* OUTPUT:
-*       After reading the MIB counter, the counter resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset)
-{
-	return (MV_REG_READ (MV64360_ETH_MIB_COUNTERS_BASE (eth_port_num)
-			     + mib_offset));
-}
-
-/*******************************************************************************
-* ethernet_phy_set - Set the ethernet port PHY address.
-*
-* DESCRIPTION:
-*       This routine set the ethernet port PHY address according to given
-*       parameter.
-*
-* INPUT:
-*		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Set PHY Address Register with given PHY address parameter.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
-
-	reg_data &= ~(0x1F << (5 * eth_port_num));
-	reg_data |= (phy_addr << (5 * eth_port_num));
-
-	MV_REG_WRITE (MV64360_ETH_PHY_ADDR_REG, reg_data);
-
-	return;
-}
-
-/*******************************************************************************
- * ethernet_phy_get - Get the ethernet port PHY address.
- *
- * DESCRIPTION:
- *       This routine returns the given ethernet port PHY address.
- *
- * INPUT:
- *		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       None.
- *
- * RETURN:
- *       PHY address.
- *
- *******************************************************************************/
-static int ethernet_phy_get (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
-
-	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
-}
-
-/*******************************************************************************
- * ethernet_phy_reset - Reset Ethernet port PHY.
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to reset the ethernet port PHY.
- *       The routine waits until the link is up again or link up is timeout.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       The ethernet port PHY renew its link.
- *
- * RETURN:
- *       None.
- *
-*******************************************************************************/
-static bool ethernet_phy_reset (ETH_PORT eth_port_num)
-{
-	unsigned int time_out = 50;
-	unsigned int phy_reg_data;
-
-	/* Reset the PHY */
-	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
-	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
-	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
-
-	/* Poll on the PHY LINK */
-	do {
-		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-		if (time_out-- == 0)
-			return false;
-	}
-	while (!(phy_reg_data & 0x20));
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_reset - Reset Ethernet port
- *
- * DESCRIPTION:
- * 	This routine resets the chip by aborting any SDMA engine activity and
- *      clearing the MIB counters. The Receiver and the Transmit unit are in
- *      idle state after this command is performed and the port is disabled.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       Channel activity is halted.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_port_reset (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	/* Stop Tx port activity. Check port Tx activity. */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Tx activity to terminate. */
-		do {
-			/* Check port cause register that all Tx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-	/* Stop Rx port activity. Check port Rx activity. */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Rx activity to terminate. */
-		do {
-			/* Check port cause register that all Rx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-
-	/* Clear all MIB counters */
-	eth_clear_mib_counters (eth_port_num);
-
-	/* Reset the Enable bit in the Configuration Register */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_PORT_SERIAL_CONTROL_REG
-			     (eth_port_num));
-	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      reg_data);
-
-	return;
-}
-
-
-
-
-/*******************************************************************************
- * eth_port_read_smi_reg - Read PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform PHY register read.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       unsigned int   phy_reg   PHY register address offset.
- *       unsigned int   *value   Register value buffer.
- *
- * OUTPUT:
- *       Write the value of a specified PHY register into given buffer.
- *
- * RETURN:
- *       false if the PHY is busy or read data is not in valid state.
- *       true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
-				   unsigned int phy_reg, unsigned int *value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-/*    printf("     Phy-Port %d has addess %d  \n",eth_port_num, phy_addr );*/
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-
-	MV_REG_WRITE (MV64360_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_READ);
-
-	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
-
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID);	/* Bit set equ operation done */
-
-	/* Wait for the data to update in the SMI register */
-#define PHY_UPDATE_TIMEOUT	10000
-	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
-
-	reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-
-	*value = reg_value & 0xffff;
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_write_smi_reg - Write to PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform writes to PHY registers.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *      unsigned int   phy_reg   PHY register address offset.
- *      unsigned int    value   Register value.
- *
- * OUTPUT:
- *      Write the given value to the specified PHY register.
- *
- * RETURN:
- *      false if the PHY is busy.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
-				    unsigned int phy_reg, unsigned int value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64360_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-	return true;
-}
-
-/*******************************************************************************
- * eth_set_access_control - Config address decode parameters for Ethernet unit
- *
- * DESCRIPTION:
- *       This function configures the address decode parameters for the Gigabit
- *       Ethernet Controller according the given parameters struct.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       ETH_WIN_PARAM  *param   Address decode parameter struct.
- *
- * OUTPUT:
- *       An access window is opened using the given access parameters.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param)
-{
-	unsigned int access_prot_reg;
-
-	/* Set access control register */
-	access_prot_reg = MV_REG_READ (MV64360_ETH_ACCESS_PROTECTION_REG
-				       (eth_port_num));
-	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
-	access_prot_reg |= (param->access_ctrl << (param->win * 2));
-	MV_REG_WRITE (MV64360_ETH_ACCESS_PROTECTION_REG (eth_port_num),
-		      access_prot_reg);
-
-	/* Set window Size reg (SR) */
-	MV_REG_WRITE ((MV64360_ETH_SIZE_REG_0 +
-		       (ETH_SIZE_REG_GAP * param->win)),
-		      (((param->size / 0x10000) - 1) << 16));
-
-	/* Set window Base address reg (BA) */
-	MV_REG_WRITE ((MV64360_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
-		      (param->target | param->attributes | param->base_addr));
-	/* High address remap reg (HARR) */
-	if (param->win < 4)
-		MV_REG_WRITE ((MV64360_ETH_HIGH_ADDR_REMAP_REG_0 +
-			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
-			      param->high_addr);
-
-	/* Base address enable reg (BARER) */
-	if (param->enable == 1)
-		MV_RESET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
-				   (1 << param->win));
-	else
-		MV_SET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
-				 (1 << param->win));
-}
-
-/*******************************************************************************
- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Rx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      int 			rx_desc_num       Number of Rx descriptors
- *      int 			rx_buff_size      Size of Rx buffer
- *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
- *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Rx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE rx_queue,
-				     int rx_desc_num,
-				     int rx_buff_size,
-				     unsigned int rx_desc_base_addr,
-				     unsigned int rx_buff_base_addr)
-{
-	ETH_RX_DESC *p_rx_desc;
-	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
-	p_rx_prev_desc = p_rx_desc;
-	buffer_addr = rx_buff_base_addr;
-
-	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (rx_buff_base_addr & 0xF)
-		return false;
-
-	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
-		return false;
-
-	/* Rx buffers must be 64-bit aligned.       */
-	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
-		return false;
-
-	/* initialize the Rx descriptors ring */
-	for (ix = 0; ix < rx_desc_num; ix++) {
-		p_rx_desc->buf_size = rx_buff_size;
-		p_rx_desc->byte_cnt = 0x0000;
-		p_rx_desc->cmd_sts =
-			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-		p_rx_desc->next_desc_ptr =
-			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
-		p_rx_desc->buf_ptr = buffer_addr;
-		p_rx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
-		buffer_addr += rx_buff_size;
-		p_rx_prev_desc = p_rx_desc;
-		p_rx_desc = (ETH_RX_DESC *)
-			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
-	}
-
-	/* Closing Rx descriptors ring */
-	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
-	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
-
-	/* Save Rx desc pointer to driver struct. */
-	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-
-	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
-		(ETH_RX_DESC *) rx_desc_base_addr;
-	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
-		rx_desc_num * RX_DESC_ALIGNED_SIZE;
-
-	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Tx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *      int 			tx_desc_num       Number of Tx descriptors
- *      int 			tx_buff_size      Size of Tx buffer
- *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
- *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Tx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE tx_queue,
-				     int tx_desc_num,
-				     int tx_buff_size,
-				     unsigned int tx_desc_base_addr,
-				     unsigned int tx_buff_base_addr)
-{
-
-	ETH_TX_DESC *p_tx_desc;
-	ETH_TX_DESC *p_tx_prev_desc;
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	/* save the first desc pointer to link with the last descriptor */
-	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
-	p_tx_prev_desc = p_tx_desc;
-	buffer_addr = tx_buff_base_addr;
-
-	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (tx_buff_base_addr & 0xF)
-		return false;
-
-	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
-	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
-		return false;
-
-	/* Initialize the Tx descriptors ring */
-	for (ix = 0; ix < tx_desc_num; ix++) {
-		p_tx_desc->byte_cnt = 0x0000;
-		p_tx_desc->l4i_chk = 0x0000;
-		p_tx_desc->cmd_sts = 0x00000000;
-		p_tx_desc->next_desc_ptr =
-			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
-
-		p_tx_desc->buf_ptr = buffer_addr;
-		p_tx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
-		buffer_addr += tx_buff_size;
-		p_tx_prev_desc = p_tx_desc;
-		p_tx_desc = (ETH_TX_DESC *)
-			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
-
-	}
-	/* Closing Tx descriptors ring */
-	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
-	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
-	/* Set Tx desc pointer in driver struct. */
-	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-
-	/* Init Tx ring base and size parameters */
-	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
-		(ETH_TX_DESC *) tx_desc_base_addr;
-	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
-		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
-
-	/* Add the queue to the list of Tx queues of this port */
-	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_send - Send an Ethernet packet
- *
- * DESCRIPTION:
- *	This routine send a given packet described by p_pktinfo parameter. It
- *      supports transmitting of a packet spaned over multiple buffers. The
- *      routine updates 'curr' and 'first' indexes according to the packet
- *      segment passed to the routine. In case the packet segment is first,
- *      the 'first' index is update. In any case, the 'curr' index is updated.
- *      If the routine get into Tx resource error it assigns 'curr' index as
- *      'first'. This way the function can abort Tx process of multiple
- *      descriptors per packet.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'curr' and 'first' indexes are updated.
- *
- * RETURN:
- *      ETH_QUEUE_FULL in case of Tx resource error.
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
-					  ETH_QUEUE tx_queue,
-					  PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_first;
-	volatile ETH_TX_DESC *p_tx_desc_curr;
-	volatile ETH_TX_DESC *p_tx_next_desc_curr;
-	volatile ETH_TX_DESC *p_tx_desc_used;
-	unsigned int command_status;
-
-	/* Do not process Tx ring in case of Tx ring resource error */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		return ETH_QUEUE_FULL;
-
-	/* Get the Tx Desc ring indexes */
-	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-
-	if (p_tx_desc_curr == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
-	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
-
-	if (command_status & (ETH_TX_FIRST_DESC)) {
-		/* Update first desc */
-		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
-		p_tx_desc_first = p_tx_desc_curr;
-	} else {
-		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-		command_status |= ETH_BUFFER_OWNED_BY_DMA;
-	}
-
-	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
-	/* boundary. We use the memory allocated for Tx descriptor. This memory  */
-	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
-	if (p_pkt_info->byte_cnt <= 8) {
-		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
-		return ETH_ERROR;
-
-		p_tx_desc_curr->buf_ptr =
-			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
-		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
-			    p_pkt_info->byte_cnt);
-	} else
-		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
-
-	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
-	p_tx_desc_curr->return_info = p_pkt_info->return_info;
-
-	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
-		/* Set last desc with DMA ownership and interrupt enable. */
-		p_tx_desc_curr->cmd_sts = command_status |
-			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
-
-		if (p_tx_desc_curr != p_tx_desc_first)
-			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
-
-		/* Flush CPU pipe */
-
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
-		CPU_PIPE_FLUSH;
-
-		/* Apply send command */
-		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
-
-		/* Finish Tx packet. Update first desc in case of Tx resource error */
-		p_tx_desc_first = p_tx_next_desc_curr;
-		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
-
-	} else {
-		p_tx_desc_curr->cmd_sts = command_status;
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-	}
-
-	/* Check for ring index overlap in the Tx desc ring */
-	if (p_tx_next_desc_curr == p_tx_desc_used) {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_desc_first, tx_queue);
-
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
-		return ETH_QUEUE_LAST_RESOURCE;
-	} else {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
-		return ETH_OK;
-	}
-}
-
-/*******************************************************************************
- * eth_tx_return_desc - Free all used Tx descriptors
- *
- * DESCRIPTION:
- *	This routine returns the transmitted packet information to the caller.
- *      It uses the 'first' index to support Tx desc return in case a transmit
- *      of a packet spanned over multiple buffer still in process.
- *      In case the Tx queue was in "resource error" condition, where there are
- *      no available Tx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'first' and 'used' indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *      ETH_RETRY in case there is transmission in process.
- *	ETH_END_OF_JOB if the routine has nothing to release.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE tx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
-	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
-	unsigned int command_status;
-
-
-	/* Get the Tx Desc ring indexes */
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-
-
-	/* Sanity check */
-	if (p_tx_desc_used == NULL)
-		return ETH_ERROR;
-
-	command_status = p_tx_desc_used->cmd_sts;
-
-	/* Still transmitting... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_RETRY;
-	}
-
-	/* Stop release. About to overlap the current available Tx descriptor */
-	if ((p_tx_desc_used == p_tx_desc_first) &&
-	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_END_OF_JOB;
-	}
-
-	/* Pass the packet information to the caller */
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->return_info = p_tx_desc_used->return_info;
-	p_tx_desc_used->return_info = 0;
-
-	/* Update the next descriptor to release. */
-	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
-
-	/* Any Tx return cancels the Tx resource error status */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-
-	return ETH_OK;
-
-}
-
-/*******************************************************************************
- * eth_port_receive - Get received information from Rx ring.
- *
- * DESCRIPTION:
- * 	This routine returns the received data to the caller. There is no
- *	data copying during routine operation. All information is returned
- *	using pointer to packet information struct passed from the caller.
- *      If the routine exhausts	Rx ring resources then the resource error flag
- *      is set.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Rx ring current and used indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
- *	ETH_END_OF_JOB if there is no received data.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_next_curr_desc;
-	volatile ETH_RX_DESC *p_rx_used_desc;
-	unsigned int command_status;
-
-	/* Do not process Rx ring in case of Rx ring resource error */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
-		printf ("\nRx Queue is full ...\n");
-		return ETH_QUEUE_FULL;
-	}
-
-	/* Get the Rx Desc ring 'curr and 'used' indexes */
-	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
-	USED_RFD_GET (p_rx_used_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_rx_curr_desc == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
-	command_status = p_rx_curr_desc->cmd_sts;
-
-	/* Nothing to receive... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
-		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
-		return ETH_END_OF_JOB;
-	}
-
-	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
-	p_pkt_info->return_info = p_rx_curr_desc->return_info;
-	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size;	/* IP fragment indicator */
-
-	/* Clean the return info field to indicate that the packet has been */
-	/* moved to the upper layers                                        */
-	p_rx_curr_desc->return_info = 0;
-
-	/* Update 'curr' in data structure */
-	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
-
-	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
-	if (p_rx_next_curr_desc == p_rx_used_desc)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-	CPU_PIPE_FLUSH;
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
- *
- * DESCRIPTION:
- *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
- *      next 'used' descriptor and attached the returned buffer to it.
- *      In case the Rx ring was in "resource error" condition, where there are
- *      no available Rx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
- *
- * OUTPUT:
- *	New available Rx resource in Rx descriptor ring.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE rx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
-
-	/* Get 'used' Rx descriptor */
-	USED_RFD_GET (p_used_rx_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_used_rx_desc == NULL)
-		return ETH_ERROR;
-
-	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
-	p_used_rx_desc->return_info = p_pkt_info->return_info;
-	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
-	p_used_rx_desc->buf_size = MV64360_RX_BUFFER_SIZE;	/* Reset Buffer size */
-
-	/* Flush the write pipe */
-	CPU_PIPE_FLUSH;
-
-	/* Return the descriptor to DMA ownership */
-	p_used_rx_desc->cmd_sts =
-		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-
-	/* Flush descriptor and CPU pipe */
-	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
-	CPU_PIPE_FLUSH;
-
-	/* Move the used descriptor pointer to the next descriptor */
-	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
-
-	/* Any Rx return cancels the Rx resource error status */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
-
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
- *
- * DESCRIPTION:
- *	This routine sets the RX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the tClk of the MV-643xx chip
- *	, and the required delay of the interrupt in usec.
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in usec
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-/*******************************************************************************
- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
- *
- * DESCRIPTION:
- *	This routine sets the TX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the t_cLK frequency of the
- *	MV-643xx chip and the required delay in the interrupt in uSec
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in uSeconds
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-
-/*******************************************************************************
- * eth_b_copy - Copy bytes from source to destination
- *
- * DESCRIPTION:
- *       This function supports the eight bytes limitation on Tx buffer size.
- *       The routine will zero eight bytes starting from the destination address
- *       followed by copying bytes from the source address to the destination.
- *
- * INPUT:
- *       unsigned int src_addr    32 bit source address.
- *       unsigned int dst_addr    32 bit destination address.
- *       int        byte_count    Number of bytes to copy.
- *
- * OUTPUT:
- *       See description.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count)
-{
-	/* Zero the dst_addr area */
-	*(unsigned int *) dst_addr = 0x0;
-
-	while (byte_count != 0) {
-		*(char *) dst_addr = *(char *) src_addr;
-		dst_addr++;
-		src_addr++;
-		byte_count--;
-	}
-}
diff --git a/board/Marvell/db64360/mv_eth.h b/board/Marvell/db64360/mv_eth.h
deleted file mode 100644
index 975ca3a9b1..0000000000
--- a/board/Marvell/db64360/mv_eth.h
+++ /dev/null
@@ -1,838 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __DB64360_ETH_H__
-#define __DB64360_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-#include <net.h>
-#include "mv_regs.h"
-#include "../common/ppc_error_no.h"
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
-#ifndef MAX_SKB_FRAGS
-#define MAX_SKB_FRAGS 0
-#endif
-
-/* Port attributes */
-/*#define MAX_RX_QUEUE_NUM	8*/
-/*#define MAX_TX_QUEUE_NUM	8*/
-#define MAX_RX_QUEUE_NUM	1
-#define MAX_TX_QUEUE_NUM	1
-
-
-/* Use one TX queue and one RX queue */
-#define MV64360_TX_QUEUE_NUM 1
-#define MV64360_RX_QUEUE_NUM 1
-
-/*
- * Number of RX / TX descriptors on RX / TX rings.
- * Note that allocating RX descriptors is done by allocating the RX
- * ring AND a preallocated RX buffers (skb's) for each descriptor.
- * The TX descriptors only allocates the TX descriptors ring,
- * with no pre allocated TX buffers (skb's are allocated by higher layers.
- */
-
-/* Default TX ring size is 10 descriptors */
-#ifdef CONFIG_MV64360_ETH_TXQUEUE_SIZE
-#define MV64360_TX_QUEUE_SIZE CONFIG_MV64360_ETH_TXQUEUE_SIZE
-#else
-#define MV64360_TX_QUEUE_SIZE 4
-#endif
-
-/* Default RX ring size is 4 descriptors */
-#ifdef	CONFIG_MV64360_ETH_RXQUEUE_SIZE
-#define MV64360_RX_QUEUE_SIZE CONFIG_MV64360_ETH_RXQUEUE_SIZE
-#else
-#define MV64360_RX_QUEUE_SIZE 4
-#endif
-
-#ifdef CONFIG_RX_BUFFER_SIZE
-#define MV64360_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
-#else
-#define MV64360_RX_BUFFER_SIZE 1600
-#endif
-
-#ifdef CONFIG_TX_BUFFER_SIZE
-#define MV64360_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
-#else
-#define MV64360_TX_BUFFER_SIZE 1600
-#endif
-
-
-/*
- *	Network device statistics. Akin to the 2.0 ether stats but
- *	with byte counters.
- */
-
-struct net_device_stats
-{
-	unsigned long	rx_packets;		/* total packets received	*/
-	unsigned long	tx_packets;		/* total packets transmitted	*/
-	unsigned long	rx_bytes;		/* total bytes received		*/
-	unsigned long	tx_bytes;		/* total bytes transmitted	*/
-	unsigned long	rx_errors;		/* bad packets received		*/
-	unsigned long	tx_errors;		/* packet transmit problems	*/
-	unsigned long	rx_dropped;		/* no space in linux buffers	*/
-	unsigned long	tx_dropped;		/* no space available in linux	*/
-	unsigned long	multicast;		/* multicast packets received	*/
-	unsigned long	collisions;
-
-	/* detailed rx_errors: */
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
-	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
-	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
-	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-
-	/* for cslip etc */
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
-};
-
-
-/* Private data structure used for ethernet device */
-struct mv64360_eth_priv {
-    unsigned int port_num;
-    struct net_device_stats *stats;
-
-/* to buffer area aligned */
-    char * p_eth_tx_buffer[MV64360_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
-    char * p_eth_rx_buffer[MV64360_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
-
-    /* Size of Tx Ring per queue */
-    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
-
-
-    /* Size of Rx Ring per queue */
-    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
-
-    /* Magic Number for Ethernet running */
-    unsigned int eth_running;
-
-};
-
-
-int mv64360_eth_init (struct eth_device *dev);
-int mv64360_eth_stop (struct eth_device *dev);
-int mv64360_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
-/*	return db64360_eth0_poll(); */
-
-int mv64360_eth_open (struct eth_device *dev);
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-
-/********************************************************************************
- * Header File for : MV-643xx network interface header
- *
- * DESCRIPTION:
- *	 This header file contains macros typedefs and function declaration for
- *	 the Marvell Gig Bit Ethernet Controller.
- *
- * DEPENDENCIES:
- *	 None.
- *
- *******************************************************************************/
-
-
-#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
-#ifdef CONFIG_MV64360_SRAM_CACHEABLE
-/* In case SRAM is cacheable but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case SRAM is cache coherent or non-cacheable */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif
-#else
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/* In case of descriptors on DDR but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case of descriptors on DDR and cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
-
-
-#define CPU_PIPE_FLUSH		   \
-{		  \
-  __asm__ __volatile__ ("eieio");	  \
-}
-
-
-/* defines  */
-
-/* Default port configuration value */
-#define PORT_CONFIG_VALUE			\
-	     ETH_UNICAST_NORMAL_MODE		|   \
-	     ETH_DEFAULT_RX_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
-	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
-	     ETH_RECEIVE_BC_IF_IP		|   \
-	     ETH_RECEIVE_BC_IF_ARP		|   \
-	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
-	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
-	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-/* Default port extend configuration value */
-#define PORT_CONFIG_EXTEND_VALUE		\
-	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
-	     ETH_PARTITION_DISABLE
-
-
-/* Default sdma control value */
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PORT_SDMA_CONFIG_VALUE				\
-			 ETH_RX_BURST_SIZE_16_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_16_64BIT;
-#else
-#define PORT_SDMA_CONFIG_VALUE			\
-			 ETH_RX_BURST_SIZE_4_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_4_64BIT;
-#endif
-
-#define GT_ETH_IPG_INT_RX(value)		\
-	    ((value & 0x3fff) << 8)
-
-/* Default port serial control value */
-#define PORT_SERIAL_CONTROL_VALUE			    \
-			ETH_FORCE_LINK_PASS			|	\
-			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-			ETH_FORCE_BP_MODE_NO_JAM		|	\
-			BIT9					|	\
-			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-			ETH_RETRANSMIT_16_ETTEMPTS		|	\
-			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-			ETH_DTE_ADV_0				|	\
-			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-			ETH_AUTO_NEG_NO_CHANGE			|	\
-			ETH_MAX_RX_PACKET_1552BYTE		|	\
-			ETH_CLR_EXT_LOOPBACK			|	\
-			ETH_SET_FULL_DUPLEX_MODE		|	\
-			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
-
-#define RX_BUFFER_MAX_SIZE  0xFFFF
-#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
-
-#define RX_BUFFER_MIN_SIZE  0x8
-#define TX_BUFFER_MIN_SIZE  0x8
-
-/* Tx WRR confoguration macros */
-#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
-#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
-#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
-
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR	    0
-#define REJECT_MAC_ADDR	    1
-
-/* Size of a Tx/Rx descriptor used in chain list data structure */
-#define RX_DESC_ALIGNED_SIZE		0x20
-#define TX_DESC_ALIGNED_SIZE		0x20
-
-/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
-#define TX_BUF_OFFSET_IN_DESC	    0x18
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET				0x2
-
-/* Gap define */
-#define ETH_BAR_GAP					0x8
-#define ETH_SIZE_REG_GAP				0x8
-#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
-#define ETH_PORT_ACCESS_CTRL_GAP			0x4
-
-/* Gigabit Ethernet Unit Global Registers */
-
-/* MIB Counters register definitions */
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
-#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
-#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
-#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
-#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
-#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
-#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
-#define ETH_MIB_FRAMES_64_OCTETS	   0x20
-#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
-#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
-#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
-#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
-#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
-#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
-#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
-#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
-#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
-#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
-#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
-#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
-#define ETH_MIB_FC_SENT			   0x54
-#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
-#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
-#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
-#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
-#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
-#define ETH_MIB_JABBER_RECEIVED		   0x6c
-#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
-#define ETH_MIB_BAD_CRC_EVENT		   0x74
-#define ETH_MIB_COLLISION		   0x78
-#define ETH_MIB_LATE_COLLISION		   0x7c
-
-/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_GMII_MII				0
-#define ETH_INTERFACE_PCM				BIT0
-#define ETH_LINK_IS_DOWN				0
-#define ETH_LINK_IS_UP					BIT1
-#define ETH_PORT_AT_HALF_DUPLEX				0
-#define ETH_PORT_AT_FULL_DUPLEX				BIT2
-#define ETH_RX_FLOW_CTRL_DISABLED			0
-#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
-#define ETH_GMII_SPEED_100_10				0
-#define ETH_GMII_SPEED_1000				BIT4
-#define ETH_MII_SPEED_10				0
-#define ETH_MII_SPEED_100				BIT5
-#define ETH_NO_TX					0
-#define ETH_TX_IN_PROGRESS				BIT7
-#define ETH_BYPASS_NO_ACTIVE				0
-#define ETH_BYPASS_ACTIVE				BIT8
-#define ETH_PORT_NOT_AT_PARTITION_STATE			0
-#define ETH_PORT_AT_PARTITION_STATE			BIT9
-#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
-#define ETH_PORT_TX_FIFO_EMPTY				BIT10
-
-
-/* These macros describes the Port configuration reg (Px_cR) bits */
-#define ETH_UNICAST_NORMAL_MODE				0
-#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
-#define ETH_DEFAULT_RX_QUEUE_0				0
-#define ETH_DEFAULT_RX_QUEUE_1				BIT1
-#define ETH_DEFAULT_RX_QUEUE_2				BIT2
-#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_4				BIT3
-#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
-#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
-#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
-#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
-#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
-#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
-#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
-#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
-#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
-#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
-#define ETH_RECEIVE_BC_IF_IP				0
-#define ETH_REJECT_BC_IF_IP				BIT8
-#define ETH_RECEIVE_BC_IF_ARP				0
-#define ETH_REJECT_BC_IF_ARP				BIT9
-#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
-#define ETH_CAPTURE_TCP_FRAMES_DIS			0
-#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
-#define ETH_CAPTURE_UDP_FRAMES_DIS			0
-#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
-#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
-#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
-#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
-#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
-#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
-#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
-#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
-#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
-#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
-#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
-#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
-#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
-#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
-#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
-#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
-#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
-
-
-/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define ETH_CLASSIFY_EN					BIT0
-#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
-#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
-#define ETH_PARTITION_DISABLE				0
-#define ETH_PARTITION_ENABLE				BIT2
-
-
-/* Tx/Rx queue command reg (RQCR/TQCR)*/
-#define ETH_QUEUE_0_ENABLE				BIT0
-#define ETH_QUEUE_1_ENABLE				BIT1
-#define ETH_QUEUE_2_ENABLE				BIT2
-#define ETH_QUEUE_3_ENABLE				BIT3
-#define ETH_QUEUE_4_ENABLE				BIT4
-#define ETH_QUEUE_5_ENABLE				BIT5
-#define ETH_QUEUE_6_ENABLE				BIT6
-#define ETH_QUEUE_7_ENABLE				BIT7
-#define ETH_QUEUE_0_DISABLE				BIT8
-#define ETH_QUEUE_1_DISABLE				BIT9
-#define ETH_QUEUE_2_DISABLE				BIT10
-#define ETH_QUEUE_3_DISABLE				BIT11
-#define ETH_QUEUE_4_DISABLE				BIT12
-#define ETH_QUEUE_5_DISABLE				BIT13
-#define ETH_QUEUE_6_DISABLE				BIT14
-#define ETH_QUEUE_7_DISABLE				BIT15
-
-
-/* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define ETH_RIFB					BIT0
-#define ETH_RX_BURST_SIZE_1_64BIT			0
-#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
-#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
-#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
-#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
-#define ETH_BLM_RX_NO_SWAP				BIT4
-#define ETH_BLM_RX_BYTE_SWAP				0
-#define ETH_BLM_TX_NO_SWAP				BIT5
-#define ETH_BLM_TX_BYTE_SWAP				0
-#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
-#define ETH_DESCRIPTORS_NO_SWAP				0
-#define ETH_TX_BURST_SIZE_1_64BIT			0
-#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
-#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
-#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
-#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
-
-
-/* These macros describes the Port serial control reg (PSCR) bits */
-#define ETH_SERIAL_PORT_DISABLE				0
-#define ETH_SERIAL_PORT_ENABLE				BIT0
-#define ETH_FORCE_LINK_PASS				BIT1
-#define ETH_DO_NOT_FORCE_LINK_PASS			0
-#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
-#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
-#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
-#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
-#define ETH_ADV_NO_FLOW_CTRL				0
-#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
-#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
-#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
-#define ETH_FORCE_BP_MODE_NO_JAM			0
-#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
-#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
-#define ETH_FORCE_LINK_FAIL				0
-#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
-#define ETH_RETRANSMIT_16_ETTEMPTS			0
-#define ETH_RETRANSMIT_FOREVER				BIT11
-#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
-#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
-#define ETH_DTE_ADV_0					0
-#define ETH_DTE_ADV_1					BIT14
-#define ETH_DISABLE_AUTO_NEG_BYPASS			0
-#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
-#define ETH_AUTO_NEG_NO_CHANGE				0
-#define ETH_RESTART_AUTO_NEG				BIT16
-#define ETH_MAX_RX_PACKET_1518BYTE			0
-#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
-#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
-#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
-#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
-#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
-#define ETH_SET_EXT_LOOPBACK				BIT20
-#define ETH_CLR_EXT_LOOPBACK				0
-#define ETH_SET_FULL_DUPLEX_MODE			BIT21
-#define ETH_SET_HALF_DUPLEX_MODE			0
-#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
-#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
-#define ETH_SET_GMII_SPEED_TO_10_100			0
-#define ETH_SET_GMII_SPEED_TO_1000			BIT23
-#define ETH_SET_MII_SPEED_TO_10				0
-#define ETH_SET_MII_SPEED_TO_100			BIT24
-
-
-/* SMI reg */
-#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
-#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
-
-/* SDMA command status fields macros */
-
-/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY		    (BIT0)
-
-/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
-
-/* Tx descriptors status */
-#define ETH_LC_ERROR			    (0	  )
-#define ETH_UR_ERROR			    (BIT1 )
-#define ETH_RL_ERROR			    (BIT2 )
-#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
-
-/* Rx descriptors status */
-#define ETH_CRC_ERROR			    (0	  )
-#define ETH_OVERRUN_ERROR		    (BIT1 )
-#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
-#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
-#define ETH_VLAN_TAGGED			    (BIT19)
-#define ETH_BPDU_FRAME			    (BIT20)
-#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
-#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
-#define ETH_OTHER_FRAME_TYPE		    (BIT22)
-#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
-#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
-#define ETH_FRAME_HEADER_OK		    (BIT25)
-#define ETH_RX_LAST_DESC		    (BIT26)
-#define ETH_RX_FIRST_DESC		    (BIT27)
-#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
-#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
-#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
-
-/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED		    (BIT2)
-
-/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
-#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
-#define ETH_TCP_FRAME			    (0	  )
-#define ETH_UDP_FRAME			    (BIT16)
-#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
-#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
-#define ETH_ZERO_PADDING		    (BIT19)
-#define ETH_TX_LAST_DESC		    (BIT20)
-#define ETH_TX_FIRST_DESC		    (BIT21)
-#define ETH_GEN_CRC			    (BIT22)
-#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
-#define ETH_AUTO_MODE			    (BIT30)
-
-/* Address decode parameters */
-/* Ethernet Base Address Register bits */
-#define EBAR_TARGET_DRAM					0x00000000
-#define EBAR_TARGET_DEVICE					0x00000001
-#define EBAR_TARGET_CBS						0x00000002
-#define EBAR_TARGET_PCI0					0x00000003
-#define EBAR_TARGET_PCI1					0x00000004
-#define EBAR_TARGET_CUNIT					0x00000005
-#define EBAR_TARGET_AUNIT					0x00000006
-#define EBAR_TARGET_GUNIT					0x00000007
-
-/* Window attributes */
-#define EBAR_ATTR_DRAM_CS0					0x00000E00
-#define EBAR_ATTR_DRAM_CS1					0x00000D00
-#define EBAR_ATTR_DRAM_CS2					0x00000B00
-#define EBAR_ATTR_DRAM_CS3					0x00000700
-
-/* DRAM Target interface */
-#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
-
-/* Device Bus Target interface */
-#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
-#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
-#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
-#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
-#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
-
-/* PCI Target interface */
-#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
-#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
-#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
-#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
-#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
-#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
-#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
-#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
-#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
-#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
-
-/* CPU 60x bus or internal SRAM interface */
-#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
-#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
-#define EBAR_ATTR_CBS_SRAM					0x00000000
-#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
-
-/* Window access control */
-#define EWIN_ACCESS_NOT_ALLOWED 0
-#define EWIN_ACCESS_READ_ONLY	BIT0
-#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
-#define EWIN0_ACCESS_MASK		0x0003
-#define EWIN1_ACCESS_MASK		0x000C
-#define EWIN2_ACCESS_MASK		0x0030
-#define EWIN3_ACCESS_MASK		0x00C0
-
-/* typedefs */
-
-typedef enum _eth_port
-{
-    ETH_0 = 0,
-	ETH_1 = 1,
-	ETH_2 = 2
-}ETH_PORT;
-
-typedef enum _eth_func_ret_status
-{
-    ETH_OK,			/* Returned as expected.		    */
-    ETH_ERROR,			/* Fundamental error.			    */
-    ETH_RETRY,			/* Could not process request. Try later.    */
-    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
-    ETH_QUEUE_FULL,		/* Ring resource error.			    */
-    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
-}ETH_FUNC_RET_STATUS;
-
-typedef enum _eth_queue
-{
-	ETH_Q0 = 0,
-	ETH_Q1 = 1,
-	ETH_Q2 = 2,
-	ETH_Q3 = 3,
-	ETH_Q4 = 4,
-	ETH_Q5 = 5,
-	ETH_Q6 = 6,
-    ETH_Q7 = 7
-} ETH_QUEUE;
-
-typedef enum _addr_win
-{
-	ETH_WIN0,
-	ETH_WIN1,
-	ETH_WIN2,
-	ETH_WIN3,
-	ETH_WIN4,
-    ETH_WIN5
-} ETH_ADDR_WIN;
-
-typedef enum _eth_target
-{
-	ETH_TARGET_DRAM	 ,
-	ETH_TARGET_DEVICE,
-	ETH_TARGET_CBS	 ,
-	ETH_TARGET_PCI0	 ,
-	ETH_TARGET_PCI1
-}ETH_TARGET;
-
-typedef struct _eth_rx_desc
-{
-	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
-	unsigned short	buf_size	   ;	/* Buffer size			    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_RX_DESC;
-
-
-typedef struct _eth_tx_desc
-{
-    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
-    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
-    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
-    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
-    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_TX_DESC;
-
-/* Unified struct for Rx and Tx operations. The user is not required to */
-/* be familier with neither Tx nor Rx descriptors.			 */
-typedef struct _pkt_info
-{
-	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
-	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} PKT_INFO;
-
-
-typedef struct _eth_win_param
-{
-    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
-    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
-    unsigned short attributes;	/* BAR attributes. See above macros. */
-    unsigned int base_addr; /* Window base address in unsigned int form */
-    unsigned int high_addr; /* Window high address in unsigned int form */
-    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
-    bool enable; /* Enable/disable access to the window. */
-    unsigned short access_ctrl; /* Access ctrl register. see above macros */
-} ETH_WIN_PARAM;
-
-
-/* Ethernet port specific infomation */
-
-typedef struct _eth_port_ctrl
-{
-    ETH_PORT  port_num; /* User Ethernet port number */
-    int port_phy_addr;	/* User phy address of Ethrnet port */
-    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
-    unsigned int  port_config; /* User port configuration value */
-    unsigned int  port_config_extend; /* User port config extend value */
-    unsigned int  port_sdma_config; /* User port SDMA config value */
-    unsigned int  port_serial_control; /* User port serial control value */
-    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
-    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
-
-    /* User function to cast virtual address to CPU bus address */
-    unsigned int  (*port_virt_to_phys)(unsigned int addr);
-    /* User scratch pad for user specific data structures */
-    void *port_private;
-
-    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
-    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
-
-    /* Tx/Rx rings managment indexes fields. For driver use */
-
-    /* Next available Rx resource */
-    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
-    /* Returning Rx resource */
-    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
-
-    /* Next available Tx resource */
-    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
-    /* Returning Tx resource */
-    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
-    /* An extra Tx index to support transmit of multiple buffers per packet */
-    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
-
-    /* Tx/Rx rings size and base variables fields. For driver use */
-
-    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
-    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
-    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
-
-    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
-    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
-    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
-
-} ETH_PORT_INFO;
-
-
-/* ethernet.h API list */
-
-/* Port operation control routines */
-static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
-static void eth_port_reset(ETH_PORT	eth_port_num);
-static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
-
-
-/* Port MAC address routines */
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr,
-				  ETH_QUEUE queue);
-
-/* PHY and MIB routines */
-static bool ethernet_phy_reset(ETH_PORT eth_port_num);
-
-static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
-				   unsigned int phy_reg,
-				   unsigned int value);
-
-static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
-				  unsigned int phy_reg,
-				  unsigned int* value);
-
-static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
-
-/* Port data flow control routines */
-static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE tx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE tx_queue,
-					      PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE rx_queue,
-					      PKT_INFO *p_pkt_info);
-
-
-static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	tx_queue,
-				    int				tx_desc_num,
-				    int				tx_buff_size,
-				    unsigned int	tx_desc_base_addr,
-				    unsigned int	tx_buff_base_addr);
-
-static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	rx_queue,
-				    int				rx_desc_num,
-				    int				rx_buff_size,
-				    unsigned int	rx_desc_base_addr,
-				    unsigned int	rx_buff_base_addr);
-
-#endif /* MV64360_ETH_ */
diff --git a/board/Marvell/db64360/mv_regs.h b/board/Marvell/db64360/mv_regs.h
deleted file mode 100644
index 0d6370b52c..0000000000
--- a/board/Marvell/db64360/mv_regs.h
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/********************************************************************************
-* gt64360r.h - GT-64360 Internal registers definition file.
-*
-* DESCRIPTION:
-*	None.
-*
-* DEPENDENCIES:
-*	None.
-*
-*******************************************************************************/
-
-#ifndef __INCmv_regsh
-#define __INCmv_regsh
-
-#define MV64360
-
-/* Supported by the Atlantis */
-#define MV64360_INCLUDE_PCI_1
-#define MV64360_INCLUDE_PCI_0_ARBITER
-#define MV64360_INCLUDE_PCI_1_ARBITER
-#define MV64360_INCLUDE_SNOOP_SUPPORT
-#define MV64360_INCLUDE_P2P
-#define MV64360_INCLUDE_ETH_PORT_2
-#define MV64360_INCLUDE_CPU_MAPPING
-#define MV64360_INCLUDE_MPSC
-
-/* Not supported features */
-#undef	INCLUDE_CNTMR_4_7
-#undef	INCLUDE_DMA_4_7
-
-/****************************************/
-/* Processor Address Space		*/
-/****************************************/
-
-/* DDR SDRAM BAR and size registers */
-
-#define MV64360_CS_0_BASE_ADDR					    0x008
-#define MV64360_CS_0_SIZE					    0x010
-#define MV64360_CS_1_BASE_ADDR					    0x208
-#define MV64360_CS_1_SIZE					    0x210
-#define MV64360_CS_2_BASE_ADDR					    0x018
-#define MV64360_CS_2_SIZE					    0x020
-#define MV64360_CS_3_BASE_ADDR					    0x218
-#define MV64360_CS_3_SIZE					    0x220
-
-/* Devices BAR and size registers */
-
-#define MV64360_DEV_CS0_BASE_ADDR				    0x028
-#define MV64360_DEV_CS0_SIZE					    0x030
-#define MV64360_DEV_CS1_BASE_ADDR				    0x228
-#define MV64360_DEV_CS1_SIZE					    0x230
-#define MV64360_DEV_CS2_BASE_ADDR				    0x248
-#define MV64360_DEV_CS2_SIZE					    0x250
-#define MV64360_DEV_CS3_BASE_ADDR				    0x038
-#define MV64360_DEV_CS3_SIZE					    0x040
-#define MV64360_BOOTCS_BASE_ADDR				    0x238
-#define MV64360_BOOTCS_SIZE					    0x240
-
-/* PCI 0 BAR and size registers */
-
-#define MV64360_PCI_0_IO_BASE_ADDR				    0x048
-#define MV64360_PCI_0_IO_SIZE					    0x050
-#define MV64360_PCI_0_MEMORY0_BASE_ADDR				    0x058
-#define MV64360_PCI_0_MEMORY0_SIZE				    0x060
-#define MV64360_PCI_0_MEMORY1_BASE_ADDR				    0x080
-#define MV64360_PCI_0_MEMORY1_SIZE				    0x088
-#define MV64360_PCI_0_MEMORY2_BASE_ADDR				    0x258
-#define MV64360_PCI_0_MEMORY2_SIZE				    0x260
-#define MV64360_PCI_0_MEMORY3_BASE_ADDR				    0x280
-#define MV64360_PCI_0_MEMORY3_SIZE				    0x288
-
-/* PCI 1 BAR and size registers */
-#define MV64360_PCI_1_IO_BASE_ADDR				    0x090
-#define MV64360_PCI_1_IO_SIZE					    0x098
-#define MV64360_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
-#define MV64360_PCI_1_MEMORY0_SIZE				    0x0a8
-#define MV64360_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
-#define MV64360_PCI_1_MEMORY1_SIZE				    0x0b8
-#define MV64360_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
-#define MV64360_PCI_1_MEMORY2_SIZE				    0x2a8
-#define MV64360_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
-#define MV64360_PCI_1_MEMORY3_SIZE				    0x2b8
-
-/* SRAM base address */
-#define MV64360_INTEGRATED_SRAM_BASE_ADDR			    0x268
-
-/* internal registers space base address */
-#define MV64360_INTERNAL_SPACE_BASE_ADDR			    0x068
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1
-   windows above */
-#define MV64360_BASE_ADDR_ENABLE				    0x278
-
-/****************************************/
-/* PCI remap registers			*/
-/****************************************/
-      /* PCI 0 */
-#define MV64360_PCI_0_IO_ADDR_REMAP				    0x0f0
-#define MV64360_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
-#define MV64360_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
-#define MV64360_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
-#define MV64360_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
-#define MV64360_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
-#define MV64360_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
-#define MV64360_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
-#define MV64360_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
-      /* PCI 1 */
-#define MV64360_PCI_1_IO_ADDR_REMAP				    0x108
-#define MV64360_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
-#define MV64360_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
-#define MV64360_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
-#define MV64360_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
-#define MV64360_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
-#define MV64360_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
-#define MV64360_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
-#define MV64360_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
-
-#define MV64360_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
-#define MV64360_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
-#define MV64360_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
-#define MV64360_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
-#define MV64360_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
-#define MV64360_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
-#define MV64360_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
-#define MV64360_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
-
-/****************************************/
-/*	   CPU Control Registers	*/
-/****************************************/
-
-#define MV64360_CPU_CONFIG					    0x000
-#define MV64360_CPU_MODE					    0x120
-#define MV64360_CPU_MASTER_CONTROL				    0x160
-#define MV64360_CPU_CROSS_BAR_CONTROL_LOW			    0x150
-#define MV64360_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
-#define MV64360_CPU_CROSS_BAR_TIMEOUT				    0x168
-
-/****************************************/
-/* SMP RegisterS			*/
-/****************************************/
-
-#define MV64360_SMP_WHO_AM_I					    0x200
-#define MV64360_SMP_CPU0_DOORBELL				    0x214
-#define MV64360_SMP_CPU0_DOORBELL_CLEAR				    0x21C
-#define MV64360_SMP_CPU1_DOORBELL				    0x224
-#define MV64360_SMP_CPU1_DOORBELL_CLEAR				    0x22C
-#define MV64360_SMP_CPU0_DOORBELL_MASK				    0x234
-#define MV64360_SMP_CPU1_DOORBELL_MASK				    0x23C
-#define MV64360_SMP_SEMAPHOR0					    0x244
-#define MV64360_SMP_SEMAPHOR1					    0x24c
-#define MV64360_SMP_SEMAPHOR2					    0x254
-#define MV64360_SMP_SEMAPHOR3					    0x25c
-#define MV64360_SMP_SEMAPHOR4					    0x264
-#define MV64360_SMP_SEMAPHOR5					    0x26c
-#define MV64360_SMP_SEMAPHOR6					    0x274
-#define MV64360_SMP_SEMAPHOR7					    0x27c
-
-/****************************************/
-/*  CPU Sync Barrier Register		*/
-/****************************************/
-
-#define MV64360_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
-#define MV64360_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
-#define MV64360_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
-#define MV64360_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
-
-/****************************************/
-/* CPU Access Protect			*/
-/****************************************/
-
-#define MV64360_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
-#define MV64360_CPU_PROTECT_WINDOW_0_SIZE			    0x188
-#define MV64360_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
-#define MV64360_CPU_PROTECT_WINDOW_1_SIZE			    0x198
-#define MV64360_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
-#define MV64360_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
-#define MV64360_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
-#define MV64360_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
-
-
-/****************************************/
-/*	    CPU Error Report		*/
-/****************************************/
-
-#define MV64360_CPU_ERROR_ADDR_LOW				    0x070
-#define MV64360_CPU_ERROR_ADDR_HIGH				    0x078
-#define MV64360_CPU_ERROR_DATA_LOW				    0x128
-#define MV64360_CPU_ERROR_DATA_HIGH				    0x130
-#define MV64360_CPU_ERROR_PARITY				    0x138
-#define MV64360_CPU_ERROR_CAUSE					    0x140
-#define MV64360_CPU_ERROR_MASK					    0x148
-
-/****************************************/
-/*	CPU Interface Debug Registers	*/
-/****************************************/
-
-#define MV64360_PUNIT_SLAVE_DEBUG_LOW				    0x360
-#define MV64360_PUNIT_SLAVE_DEBUG_HIGH				    0x368
-#define MV64360_PUNIT_MASTER_DEBUG_LOW				    0x370
-#define MV64360_PUNIT_MASTER_DEBUG_HIGH				    0x378
-#define MV64360_PUNIT_MMASK					    0x3e4
-
-/****************************************/
-/*  Integrated SRAM Registers		*/
-/****************************************/
-
-#define MV64360_SRAM_CONFIG					    0x380
-#define MV64360_SRAM_TEST_MODE					    0X3F4
-#define MV64360_SRAM_ERROR_CAUSE				    0x388
-#define MV64360_SRAM_ERROR_ADDR					    0x390
-#define MV64360_SRAM_ERROR_ADDR_HIGH				    0X3F8
-#define MV64360_SRAM_ERROR_DATA_LOW				    0x398
-#define MV64360_SRAM_ERROR_DATA_HIGH				    0x3a0
-#define MV64360_SRAM_ERROR_DATA_PARITY				    0x3a8
-
-/****************************************/
-/* SDRAM Configuration			*/
-/****************************************/
-
-#define MV64360_SDRAM_CONFIG					    0x1400
-#define MV64360_D_UNIT_CONTROL_LOW				    0x1404
-#define MV64360_D_UNIT_CONTROL_HIGH				    0x1424
-#define MV64360_SDRAM_TIMING_CONTROL_LOW			    0x1408
-#define MV64360_SDRAM_TIMING_CONTROL_HIGH			    0x140c
-#define MV64360_SDRAM_ADDR_CONTROL				    0x1410
-#define MV64360_SDRAM_OPEN_PAGES_CONTROL			    0x1414
-#define MV64360_SDRAM_OPERATION					    0x1418
-#define MV64360_SDRAM_MODE					    0x141c
-#define MV64360_EXTENDED_DRAM_MODE				    0x1420
-#define MV64360_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
-#define MV64360_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
-#define MV64360_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
-#define MV64360_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
-#define MV64360_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
-
-/****************************************/
-/* SDRAM Error Report			*/
-/****************************************/
-
-#define MV64360_SDRAM_ERROR_DATA_LOW				    0x1444
-#define MV64360_SDRAM_ERROR_DATA_HIGH				    0x1440
-#define MV64360_SDRAM_ERROR_ADDR				    0x1450
-#define MV64360_SDRAM_RECEIVED_ECC				    0x1448
-#define MV64360_SDRAM_CALCULATED_ECC				    0x144c
-#define MV64360_SDRAM_ECC_CONTROL				    0x1454
-#define MV64360_SDRAM_ECC_ERROR_COUNTER				    0x1458
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-
-#define MV64360_DFCDL_CONFIG0					    0x1480
-#define MV64360_DFCDL_CONFIG1					    0x1484
-#define MV64360_DLL_WRITE					    0x1488
-#define MV64360_DLL_READ					    0x148c
-#define MV64360_SRAM_ADDR					    0x1490
-#define MV64360_SRAM_DATA0					    0x1494
-#define MV64360_SRAM_DATA1					    0x1498
-#define MV64360_SRAM_DATA2					    0x149c
-#define MV64360_DFCL_PROBE					    0x14a0
-
-/******************************************/
-/*   Debug Registers			  */
-/******************************************/
-
-#define MV64360_DUNIT_DEBUG_LOW					    0x1460
-#define MV64360_DUNIT_DEBUG_HIGH				    0x1464
-#define MV64360_DUNIT_MMASK					    0X1b40
-
-/****************************************/
-/* Device Parameters			*/
-/****************************************/
-
-#define MV64360_DEVICE_BANK0_PARAMETERS				    0x45c
-#define MV64360_DEVICE_BANK1_PARAMETERS				    0x460
-#define MV64360_DEVICE_BANK2_PARAMETERS				    0x464
-#define MV64360_DEVICE_BANK3_PARAMETERS				    0x468
-#define MV64360_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
-#define MV64360_DEVICE_INTERFACE_CONTROL			    0x4c0
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
-
-/****************************************/
-/* Device interrupt registers		*/
-/****************************************/
-
-#define MV64360_DEVICE_INTERRUPT_CAUSE				    0x4d0
-#define MV64360_DEVICE_INTERRUPT_MASK				    0x4d4
-#define MV64360_DEVICE_ERROR_ADDR				    0x4d8
-#define MV64360_DEVICE_ERROR_DATA				    0x4dc
-#define MV64360_DEVICE_ERROR_PARITY				    0x4e0
-
-/****************************************/
-/* Device debug registers		*/
-/****************************************/
-
-#define MV64360_DEVICE_DEBUG_LOW				    0x4e4
-#define MV64360_DEVICE_DEBUG_HIGH				    0x4e8
-#define MV64360_RUNIT_MMASK					    0x4f0
-
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-
-#define MV64360_PCI_0_CS_0_BANK_SIZE				    0xc08
-#define MV64360_PCI_1_CS_0_BANK_SIZE				    0xc88
-#define MV64360_PCI_0_CS_1_BANK_SIZE				    0xd08
-#define MV64360_PCI_1_CS_1_BANK_SIZE				    0xd88
-#define MV64360_PCI_0_CS_2_BANK_SIZE				    0xc0c
-#define MV64360_PCI_1_CS_2_BANK_SIZE				    0xc8c
-#define MV64360_PCI_0_CS_3_BANK_SIZE				    0xd0c
-#define MV64360_PCI_1_CS_3_BANK_SIZE				    0xd8c
-#define MV64360_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
-#define MV64360_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
-#define MV64360_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
-#define MV64360_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
-#define MV64360_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
-#define MV64360_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
-#define MV64360_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
-#define MV64360_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
-#define MV64360_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
-#define MV64360_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
-#define MV64360_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
-#define MV64360_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
-#define MV64360_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
-#define MV64360_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
-#define MV64360_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
-#define MV64360_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
-#define MV64360_PCI_0_CPU_BAR_SIZE				    0xd28
-#define MV64360_PCI_1_CPU_BAR_SIZE				    0xda8
-#define MV64360_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
-#define MV64360_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
-#define MV64360_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
-#define MV64360_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
-#define MV64360_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
-#define MV64360_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
-#define MV64360_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
-#define MV64360_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
-#define MV64360_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
-#define MV64360_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
-#define MV64360_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
-#define MV64360_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
-#define MV64360_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
-#define MV64360_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
-#define MV64360_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
-#define MV64360_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
-#define MV64360_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
-#define MV64360_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
-#define MV64360_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
-#define MV64360_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
-#define MV64360_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
-#define MV64360_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
-#define MV64360_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
-#define MV64360_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
-#define MV64360_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
-#define MV64360_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
-#define MV64360_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
-#define MV64360_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
-#define MV64360_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
-#define MV64360_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
-#define MV64360_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
-#define MV64360_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
-#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
-#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
-#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
-#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
-#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
-#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
-#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
-#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
-#define MV64360_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
-#define MV64360_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
-#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
-#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
-#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
-#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
-#define MV64360_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
-#define MV64360_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
-#define MV64360_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
-#define MV64360_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
-#define MV64360_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
-#define MV64360_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
-#define MV64360_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
-#define MV64360_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
-#define MV64360_PCI_0_HEADERS_RETARGET_BASE			    0xF44
-#define MV64360_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
-#define MV64360_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
-#define MV64360_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
-
-/***********************************/
-/*   PCI Control Register Map	   */
-/***********************************/
-
-#define MV64360_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
-#define MV64360_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
-#define MV64360_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
-#define MV64360_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
-#define MV64360_PCI_0_COMMAND					    0xc00
-#define MV64360_PCI_1_COMMAND					    0xc80
-#define MV64360_PCI_0_MODE					    0xd00
-#define MV64360_PCI_1_MODE					    0xd80
-#define MV64360_PCI_0_RETRY					    0xc04
-#define MV64360_PCI_1_RETRY					    0xc84
-#define MV64360_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
-#define MV64360_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
-#define MV64360_PCI_0_MSI_TRIGGER_TIMER				    0xc38
-#define MV64360_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
-#define MV64360_PCI_0_ARBITER_CONTROL				    0x1d00
-#define MV64360_PCI_1_ARBITER_CONTROL				    0x1d80
-#define MV64360_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
-#define MV64360_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
-#define MV64360_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
-#define MV64360_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
-#define MV64360_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
-#define MV64360_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
-#define MV64360_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
-#define MV64360_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
-#define MV64360_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
-#define MV64360_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
-#define MV64360_PCI_0_P2P_CONFIG				    0x1d14
-#define MV64360_PCI_1_P2P_CONFIG				    0x1d94
-
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
-
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define MV64360_PCI_0_CONFIG_ADDR				    0xcf8
-#define MV64360_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
-#define MV64360_PCI_1_CONFIG_ADDR				    0xc78
-#define MV64360_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
-#define MV64360_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
-#define MV64360_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers		*/
-/****************************************/
-
-#define MV64360_PCI_0_SERR_MASK					    0xc28
-#define MV64360_PCI_1_SERR_MASK					    0xca8
-#define MV64360_PCI_0_ERROR_ADDR_LOW				    0x1d40
-#define MV64360_PCI_1_ERROR_ADDR_LOW				    0x1dc0
-#define MV64360_PCI_0_ERROR_ADDR_HIGH				    0x1d44
-#define MV64360_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
-#define MV64360_PCI_0_ERROR_ATTRIBUTE				    0x1d48
-#define MV64360_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
-#define MV64360_PCI_0_ERROR_COMMAND				    0x1d50
-#define MV64360_PCI_1_ERROR_COMMAND				    0x1dd0
-#define MV64360_PCI_0_ERROR_CAUSE				    0x1d58
-#define MV64360_PCI_1_ERROR_CAUSE				    0x1dd8
-#define MV64360_PCI_0_ERROR_MASK				    0x1d5c
-#define MV64360_PCI_1_ERROR_MASK				    0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers		*/
-/****************************************/
-
-#define MV64360_PCI_0_MMASK					    0X1D24
-#define MV64360_PCI_1_MMASK					    0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define MV64360_PCI_DEVICE_AND_VENDOR_ID			    0x000
-#define MV64360_PCI_STATUS_AND_COMMAND				    0x004
-#define MV64360_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
-#define MV64360_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
-
-#define MV64360_PCI_SCS_0_BASE_ADDR_LOW				    0x010
-#define MV64360_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
-#define MV64360_PCI_SCS_1_BASE_ADDR_LOW				    0x018
-#define MV64360_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
-#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
-#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
-#define MV64360_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
-#define MV64360_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
-#define MV64360_PCI_CAPABILTY_LIST_POINTER			    0x034
-#define MV64360_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
-       /* capability list */
-#define MV64360_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
-#define MV64360_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
-#define MV64360_PCI_VPD_ADDR					    0x048
-#define MV64360_PCI_VPD_DATA					    0x04c
-#define MV64360_PCI_MSI_MESSAGE_CONTROL				    0x050
-#define MV64360_PCI_MSI_MESSAGE_ADDR				    0x054
-#define MV64360_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
-#define MV64360_PCI_MSI_MESSAGE_DATA				    0x05c
-#define MV64360_PCI_X_COMMAND					    0x060
-#define MV64360_PCI_X_STATUS					    0x064
-#define MV64360_PCI_COMPACT_PCI_HOT_SWAP			    0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define MV64360_PCI_SCS_2_BASE_ADDR_LOW				    0x110
-#define MV64360_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
-#define MV64360_PCI_SCS_3_BASE_ADDR_LOW				    0x118
-#define MV64360_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
-#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
-#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
-#define MV64360_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
-#define MV64360_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
-#define MV64360_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
-#define MV64360_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
-#define MV64360_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
-#define MV64360_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
-#define MV64360_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
-#define MV64360_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
-#define MV64360_PCI_CPU_BASE_ADDR_LOW				    0x220
-#define MV64360_PCI_CPU_BASE_ADDR_HIGH				    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
-#define MV64360_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
-#define MV64360_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
-#define MV64360_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
-#define MV64360_PCI_P2P_I_O_BASE_ADDR				    0x420
-#define MV64360_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
-
-/****************************************/
-/* Messaging Unit Registers (I20)	*/
-/****************************************/
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
-#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
-#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
-#define MV64360_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
-#define MV64360_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define MV64360_ETH_PHY_ADDR_REG				    0x2000
-#define MV64360_ETH_SMI_REG					    0x2004
-#define MV64360_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
-#define MV64360_ETH_UNIT_DEFAULTID_REG				    0x200c
-#define MV64360_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
-#define MV64360_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
-#define MV64360_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
-#define MV64360_ETH_UNIT_ERROR_ADDR_REG				    0x2094
-#define MV64360_ETH_BAR_0					    0x2200
-#define MV64360_ETH_BAR_1					    0x2208
-#define MV64360_ETH_BAR_2					    0x2210
-#define MV64360_ETH_BAR_3					    0x2218
-#define MV64360_ETH_BAR_4					    0x2220
-#define MV64360_ETH_BAR_5					    0x2228
-#define MV64360_ETH_SIZE_REG_0					    0x2204
-#define MV64360_ETH_SIZE_REG_1					    0x220c
-#define MV64360_ETH_SIZE_REG_2					    0x2214
-#define MV64360_ETH_SIZE_REG_3					    0x221c
-#define MV64360_ETH_SIZE_REG_4					    0x2224
-#define MV64360_ETH_SIZE_REG_5					    0x222c
-#define MV64360_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
-#define MV64360_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
-#define MV64360_ETH_BASE_ADDR_ENABLE_REG			    0x2290
-#define MV64360_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
-#define MV64360_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
-#define MV64360_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
-#define MV64360_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
-#define MV64360_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
-#define MV64360_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
-#define MV64360_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
-#define MV64360_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
-#define MV64360_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
-#define MV64360_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
-#define MV64360_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
-#define MV64360_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
-#define MV64360_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
-#define MV64360_ETH_DSCP_3(port)				   (0x242c + (port<<10))
-#define MV64360_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
-#define MV64360_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
-#define MV64360_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
-#define MV64360_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
-#define MV64360_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
-#define MV64360_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
-#define MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
-#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
-#define MV64360_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
-#define MV64360_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
-#define MV64360_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
-#define MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
-#define MV64360_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
-#define MV64360_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
-#define MV64360_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
-#define MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
-#define MV64360_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
-#define MV64360_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
-#define MV64360_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
-#define MV64360_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
-#define MV64360_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
-#define MV64360_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
-#define MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
-#define MV64360_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
-#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
-#define MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
-#define MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
-#define MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
-
-/*******************************************/
-/*	    CUNIT  Registers		   */
-/*******************************************/
-
-	 /* Address Decoding Register Map */
-
-#define MV64360_CUNIT_BASE_ADDR_REG0				    0xf200
-#define MV64360_CUNIT_BASE_ADDR_REG1				    0xf208
-#define MV64360_CUNIT_BASE_ADDR_REG2				    0xf210
-#define MV64360_CUNIT_BASE_ADDR_REG3				    0xf218
-#define MV64360_CUNIT_SIZE0					    0xf204
-#define MV64360_CUNIT_SIZE1					    0xf20c
-#define MV64360_CUNIT_SIZE2					    0xf214
-#define MV64360_CUNIT_SIZE3					    0xf21c
-#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
-#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
-#define MV64360_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
-#define MV64360_MPSC0_ACCESS_PROTECTION_REG			    0xf254
-#define MV64360_MPSC1_ACCESS_PROTECTION_REG			    0xf258
-#define MV64360_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
-
-	/*  Error Report Registers  */
-
-#define MV64360_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
-#define MV64360_CUNIT_INTERRUPT_MASK_REG			    0xf314
-#define MV64360_CUNIT_ERROR_ADDR				    0xf318
-
-	/*  Cunit Control Registers */
-
-#define MV64360_CUNIT_ARBITER_CONTROL_REG			    0xf300
-#define MV64360_CUNIT_CONFIG_REG				    0xb40c
-#define MV64360_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
-
-	/*  Cunit Debug Registers   */
-
-#define MV64360_CUNIT_DEBUG_LOW					    0xf340
-#define MV64360_CUNIT_DEBUG_HIGH				    0xf344
-#define MV64360_CUNIT_MMASK					    0xf380
-
-	/*  Cunit Base Address Enable Window Bits*/
-#define MV64360_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
-#define MV64360_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
-#define MV64360_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
-#define MV64360_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
-
-	/*  MPSCs Clocks Routing Registers  */
-
-#define MV64360_MPSC_ROUTING_REG				    0xb400
-#define MV64360_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
-#define MV64360_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
-
-	/*  MPSCs Interrupts Registers	  */
-
-#define MV64360_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
-#define MV64360_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
-
-#define MV64360_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
-#define MV64360_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
-#define MV64360_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
-
-	/*  MPSC0 Registers	 */
-
-
-/***************************************/
-/*	    SDMA Registers	       */
-/***************************************/
-
-#define MV64360_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
-#define MV64360_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
-#define MV64360_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
-#define MV64360_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
-#define MV64360_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
-
-#define MV64360_SDMA_CAUSE_REG					    0xb800
-#define MV64360_SDMA_MASK_REG					    0xb880
-
-
-/****************************************/
-/* SDMA Address Space Targets		*/
-/****************************************/
-
-#define MV64360_SDMA_DRAM_CS_0_TARGET				    0x0e00
-#define MV64360_SDMA_DRAM_CS_1_TARGET				    0x0d00
-#define MV64360_SDMA_DRAM_CS_2_TARGET				    0x0b00
-#define MV64360_SDMA_DRAM_CS_3_TARGET				    0x0700
-
-#define MV64360_SDMA_DEV_CS_0_TARGET				    0x1e01
-#define MV64360_SDMA_DEV_CS_1_TARGET				    0x1d01
-#define MV64360_SDMA_DEV_CS_2_TARGET				    0x1b01
-#define MV64360_SDMA_DEV_CS_3_TARGET				    0x1701
-
-#define MV64360_SDMA_BOOT_CS_TARGET				    0x0f00
-
-#define MV64360_SDMA_SRAM_TARGET				    0x0003
-#define MV64360_SDMA_60X_BUS_TARGET				    0x4003
-
-#define MV64360_PCI_0_TARGET					    0x0003
-#define MV64360_PCI_1_TARGET					    0x0004
-
-
-/* Devices BAR and size registers */
-
-#define MV64360_DEV_CS0_BASE_ADDR				    0x028
-#define MV64360_DEV_CS0_SIZE					    0x030
-#define MV64360_DEV_CS1_BASE_ADDR				    0x228
-#define MV64360_DEV_CS1_SIZE					    0x230
-#define MV64360_DEV_CS2_BASE_ADDR				    0x248
-#define MV64360_DEV_CS2_SIZE					    0x250
-#define MV64360_DEV_CS3_BASE_ADDR				    0x038
-#define MV64360_DEV_CS3_SIZE					    0x040
-#define MV64360_BOOTCS_BASE_ADDR				    0x238
-#define MV64360_BOOTCS_SIZE					    0x240
-
-/* SDMA Window access protection */
-#define MV64360_SDMA_WIN_ACCESS_NOT_ALLOWED 0
-#define MV64360_SDMA_WIN_ACCESS_READ_ONLY 1
-#define MV64360_SDMA_WIN_ACCESS_FULL 2
-
-/* BRG Interrupts */
-
-#define MV64360_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
-#define MV64360_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
-#define MV64360_BRG_CAUSE_REG					    0xb834
-#define MV64360_BRG_MASK_REG					    0xb8b4
-
-/****************************************/
-/* DMA Channel Control			*/
-/****************************************/
-
-#define MV64360_DMA_CHANNEL0_CONTROL				    0x840
-#define MV64360_DMA_CHANNEL0_CONTROL_HIGH			    0x880
-#define MV64360_DMA_CHANNEL1_CONTROL				    0x844
-#define MV64360_DMA_CHANNEL1_CONTROL_HIGH			    0x884
-#define MV64360_DMA_CHANNEL2_CONTROL				    0x848
-#define MV64360_DMA_CHANNEL2_CONTROL_HIGH			    0x888
-#define MV64360_DMA_CHANNEL3_CONTROL				    0x84C
-#define MV64360_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
-
-
-/****************************************/
-/*	     IDMA Registers		*/
-/****************************************/
-
-#define MV64360_DMA_CHANNEL0_BYTE_COUNT				    0x800
-#define MV64360_DMA_CHANNEL1_BYTE_COUNT				    0x804
-#define MV64360_DMA_CHANNEL2_BYTE_COUNT				    0x808
-#define MV64360_DMA_CHANNEL3_BYTE_COUNT				    0x80C
-#define MV64360_DMA_CHANNEL0_SOURCE_ADDR			    0x810
-#define MV64360_DMA_CHANNEL1_SOURCE_ADDR			    0x814
-#define MV64360_DMA_CHANNEL2_SOURCE_ADDR			    0x818
-#define MV64360_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
-#define MV64360_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
-#define MV64360_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
-#define MV64360_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
-#define MV64360_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
-#define MV64360_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
-#define MV64360_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
-#define MV64360_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
-#define MV64360_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
-#define MV64360_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
-#define MV64360_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
-#define MV64360_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
-#define MV64360_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
-
- /*  IDMA Address Decoding Base Address Registers  */
-
-#define MV64360_DMA_BASE_ADDR_REG0				    0xa00
-#define MV64360_DMA_BASE_ADDR_REG1				    0xa08
-#define MV64360_DMA_BASE_ADDR_REG2				    0xa10
-#define MV64360_DMA_BASE_ADDR_REG3				    0xa18
-#define MV64360_DMA_BASE_ADDR_REG4				    0xa20
-#define MV64360_DMA_BASE_ADDR_REG5				    0xa28
-#define MV64360_DMA_BASE_ADDR_REG6				    0xa30
-#define MV64360_DMA_BASE_ADDR_REG7				    0xa38
-
- /*  IDMA Address Decoding Size Address Register   */
-
-#define MV64360_DMA_SIZE_REG0					    0xa04
-#define MV64360_DMA_SIZE_REG1					    0xa0c
-#define MV64360_DMA_SIZE_REG2					    0xa14
-#define MV64360_DMA_SIZE_REG3					    0xa1c
-#define MV64360_DMA_SIZE_REG4					    0xa24
-#define MV64360_DMA_SIZE_REG5					    0xa2c
-#define MV64360_DMA_SIZE_REG6					    0xa34
-#define MV64360_DMA_SIZE_REG7					    0xa3C
-
- /* IDMA Address Decoding High Address Remap and Access
-		  Protection Registers			  */
-
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
-#define MV64360_DMA_BASE_ADDR_ENABLE_REG			    0xa80
-#define MV64360_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
-#define MV64360_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
-#define MV64360_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
-#define MV64360_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
-#define MV64360_DMA_ARBITER_CONTROL				    0x860
-#define MV64360_DMA_CROSS_BAR_TIMEOUT				    0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
-#define MV64360_DMA_HEADERS_RETARGET_CONTROL			    0xa84
-#define MV64360_DMA_HEADERS_RETARGET_BASE			    0xa88
-
- /*  IDMA Interrupt Register  */
-
-#define MV64360_DMA_INTERRUPT_CAUSE_REG				    0x8c0
-#define MV64360_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
-#define MV64360_DMA_ERROR_ADDR					    0x8c8
-#define MV64360_DMA_ERROR_SELECT				    0x8cc
-
- /*  IDMA Debug Register ( for internal use )	 */
-
-#define MV64360_DMA_DEBUG_LOW					    0x8e0
-#define MV64360_DMA_DEBUG_HIGH					    0x8e4
-#define MV64360_DMA_SPARE					    0xA8C
-
-/****************************************/
-/* Timer_Counter			*/
-/****************************************/
-
-#define MV64360_TIMER_COUNTER0					    0x850
-#define MV64360_TIMER_COUNTER1					    0x854
-#define MV64360_TIMER_COUNTER2					    0x858
-#define MV64360_TIMER_COUNTER3					    0x85C
-#define MV64360_TIMER_COUNTER_0_3_CONTROL			    0x864
-#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
-#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
-
-/****************************************/
-/*	   Watchdog registers		*/
-/****************************************/
-
-#define MV64360_WATCHDOG_CONFIG_REG				    0xb410
-#define MV64360_WATCHDOG_VALUE_REG				    0xb414
-
-/****************************************/
-/* I2C Registers			*/
-/****************************************/
-
-#define MV64360_I2C_SLAVE_ADDR					    0xc000
-#define MV64360_I2C_EXTENDED_SLAVE_ADDR				    0xc010
-#define MV64360_I2C_DATA					    0xc004
-#define MV64360_I2C_CONTROL					    0xc008
-#define MV64360_I2C_STATUS_BAUDE_RATE				    0xc00C
-#define MV64360_I2C_SOFT_RESET					    0xc01c
-
-/****************************************/
-/* GPP Interface Registers		*/
-/****************************************/
-
-#define MV64360_GPP_IO_CONTROL					    0xf100
-#define MV64360_GPP_LEVEL_CONTROL				    0xf110
-#define MV64360_GPP_VALUE					    0xf104
-#define MV64360_GPP_INTERRUPT_CAUSE				    0xf108
-#define MV64360_GPP_INTERRUPT_MASK0				    0xf10c
-#define MV64360_GPP_INTERRUPT_MASK1				    0xf114
-#define MV64360_GPP_VALUE_SET					    0xf118
-#define MV64360_GPP_VALUE_CLEAR					    0xf11c
-
-/****************************************/
-/* Interrupt Controller Registers	*/
-/****************************************/
-
-/****************************************/
-/* Interrupts				*/
-/****************************************/
-
-#define MV64360_MAIN_INTERRUPT_CAUSE_LOW			    0x004
-#define MV64360_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
-#define MV64360_CPU_INTERRUPT0_MASK_LOW				    0x014
-#define MV64360_CPU_INTERRUPT0_MASK_HIGH			    0x01c
-#define MV64360_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
-#define MV64360_CPU_INTERRUPT1_MASK_LOW				    0x034
-#define MV64360_CPU_INTERRUPT1_MASK_HIGH			    0x03c
-#define MV64360_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
-#define MV64360_INTERRUPT0_MASK_0_LOW				    0x054
-#define MV64360_INTERRUPT0_MASK_0_HIGH				    0x05c
-#define MV64360_INTERRUPT0_SELECT_CAUSE				    0x064
-#define MV64360_INTERRUPT1_MASK_0_LOW				    0x074
-#define MV64360_INTERRUPT1_MASK_0_HIGH				    0x07c
-#define MV64360_INTERRUPT1_SELECT_CAUSE				    0x084
-
-/****************************************/
-/*	MPP Interface Registers		*/
-/****************************************/
-
-#define MV64360_MPP_CONTROL0					    0xf000
-#define MV64360_MPP_CONTROL1					    0xf004
-#define MV64360_MPP_CONTROL2					    0xf008
-#define MV64360_MPP_CONTROL3					    0xf00c
-
-/****************************************/
-/*    Serial Initialization registers	*/
-/****************************************/
-
-#define MV64360_SERIAL_INIT_LAST_DATA				    0xf324
-#define MV64360_SERIAL_INIT_CONTROL				    0xf328
-#define MV64360_SERIAL_INIT_STATUS				    0xf32c
-
-
-#endif /* __INCgt64360rh */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
deleted file mode 100644
index 32172a2070..0000000000
--- a/board/Marvell/db64360/pci.c
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/* PCI.c - PCI functions */
-
-
-#include <common.h>
-#include <pci.h>
-
-#include "../include/pci.h"
-
-#undef DEBUG
-#undef IDE_SET_NATIVE_MODE
-static unsigned int local_buses[] = { 0, 0 };
-
-static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
-	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-};
-
-
-#ifdef DEBUG
-static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
-static void gt_pci_bus_mode_display (PCI_HOST host)
-{
-	unsigned int mode;
-
-
-	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
-	switch (mode) {
-	case 0:
-		printf ("PCI %d bus mode: Conventional PCI\n", host);
-		break;
-	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
-		break;
-	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
-		break;
-	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
-		break;
-	default:
-		printf ("Unknown BUS %d\n", mode);
-	}
-}
-#endif
-
-static const unsigned int pci_p2p_configuration_reg[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static const unsigned int pci_configuration_address[] = {
-	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
-};
-
-static const unsigned int pci_configuration_data[] = {
-	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
-	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
-};
-
-static const unsigned int pci_error_cause_reg[] = {
-	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
-};
-
-static const unsigned int pci_arbiter_control[] = {
-	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
-};
-
-static const unsigned int pci_address_space_en[] = {
-	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
-};
-
-static const unsigned int pci_snoop_control_base_0_low[] = {
-	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_snoop_control_top_0[] = {
-	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
-};
-
-static const unsigned int pci_access_control_base_0_low[] = {
-	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_access_control_top_0[] = {
-	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
-};
-
-static const unsigned int pci_scs_bank_size[2][4] = {
-	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
-	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
-	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
-	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
-};
-
-static const unsigned int pci_p2p_configuration[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-
-/********************************************************************
-* pciWriteConfigReg - Write to a PCI configuration register
-*                    - Make sure the GT is configured as a master before writing
-*                      to another device on the PCI.
-*                    - The function takes care of Big/Little endian conversion.
-*
-*
-* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
-*                   (or any other PCI device spec)
-*           pciDevNum: The device number needs to be addressed.
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
-			unsigned int pciDevNum, unsigned int data)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-	unsigned int addr;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &addr);
-	if (addr != DataForAddrReg)
-		return;
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-/********************************************************************
-* pciReadConfigReg  - Read from a PCI0 configuration register
-*                    - Make sure the GT is configured as a master before reading
-*                     from another device on the PCI.
-*                   - The function takes care of Big/Little endian conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec)
-*           pciDevNum: The device number needs to be addressed.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
-			       unsigned int pciDevNum)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int data;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return 0xffffffff;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &data);
-	if (data != DataForAddrReg)
-		return 0xffffffff;
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-/********************************************************************
-* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-*                               the agent is placed on another Bus. For more
-*                               information read P2P in the PCI spec.
-*
-* Inputs:   unsigned int regOffset - The register offset as it apears in the
-*           GT spec (or any other PCI device spec).
-*           unsigned int pciDevNum - The device number needs to be addressed.
-*           unsigned int busNum - On which bus does the Target agent connect
-*                                 to.
-*           unsigned int data - data to be written.
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
-*   PCI spec referring to P2P.
-*
-*********************************************************************/
-void pciOverBridgeWriteConfigReg (PCI_HOST host,
-				  unsigned int regOffset,
-				  unsigned int pciDevNum,
-				  unsigned int busNum, unsigned int data)
-{
-	unsigned int DataForReg;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
-	} else {
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT31 | BIT0;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-
-/********************************************************************
-* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
-*                               the agent target locate on another PCI bus.
-*                             - Make sure the GT is configured as a master
-*                               before reading from another device on the PCI.
-*                             - The function takes care of Big/Little endian
-*                               conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec). (configuration register offset.)
-*           pciDevNum: The device number needs to be addressed.
-*           busNum: the Bus number where the agent is place.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
-					 unsigned int regOffset,
-					 unsigned int pciDevNum,
-					 unsigned int busNum)
-{
-	unsigned int DataForReg;
-	unsigned int data;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
-	} else {		/* agent on another bus */
-
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT0 | BIT31;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-
-/********************************************************************
-* pciGetRegOffset - Gets the register offset for this region config.
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI register base address
-*********************************************************************/
-static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	}
-	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-}
-
-static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_ADDRESS_REMAP;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_ADDRESS_REMAP;
-		}
-	}
-	return PCI_0MEMORY0_ADDRESS_REMAP;
-}
-
-/********************************************************************
-* pciGetBaseAddress - Gets the base address of a PCI.
-*           - If the PCI size is 0 then this base address has no meaning!!!
-*
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI base address.
-*********************************************************************/
-unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int regBase;
-	unsigned int regEnd;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &regBase);
-	GT_REG_READ (regOffset + 8, &regEnd);
-
-	if (regEnd <= regBase)
-		return 0xffffffff;	/* ERROR !!! */
-
-	regBase = regBase << 16;
-	return regBase;
-}
-
-bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
-		  unsigned int bankBase, unsigned int bankLength)
-{
-	unsigned int low = 0xfff;
-	unsigned int high = 0x0;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-	unsigned int remapOffset = pciGetRemapOffset (host, region);
-
-	if (bankLength != 0) {
-		low = (bankBase >> 16) & 0xffff;
-		high = ((bankBase + bankLength) >> 16) - 1;
-	}
-
-	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
-	GT_REG_WRITE (regOffset + 8, high);
-
-	if (bankLength != 0) {	/* must do AFTER writing maps */
-		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
-								   dont support upper 32
-								   in this driver */
-	}
-	return true;
-}
-
-unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	return (low & 0xffff) << 16;
-}
-
-unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low, high;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	GT_REG_READ (regOffset + 8, &high);
-	return ((high & 0xffff) + 1) << 16;
-}
-
-
-/* ronen - 7/Dec/03*/
-/********************************************************************
-* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
-* Inputs: one of the PCI BAR
-*********************************************************************/
-void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-/********************************************************************
-* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
-*
-* Inputs: base and size of PCI SCS
-*********************************************************************/
-void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
-		       unsigned int pciDramBase, unsigned int pciDramSize)
-{
-	/*ronen different function for 3rd bank. */
-	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
-
-	pciDramBase = pciDramBase & 0xfffff000;
-	pciDramBase = pciDramBase | (pciReadConfigReg (host,
-						       PCI_SCS_0_BASE_ADDRESS
-						       + offset,
-						       SELF) & 0x00000fff);
-	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
-			   pciDramBase);
-	if (pciDramSize == 0)
-		pciDramSize++;
-	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
-	gtPciEnableInternalBAR (host, bank);
-}
-
-/********************************************************************
-* pciSetRegionFeatures - This function modifys one of the 8 regions with
-*                         feature bits given as an input.
-*                       - Be advised to check the spec before modifying them.
-* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-*         unsigned int features - See file: pci.h there are defintion for those
-*                                 region features.
-*         unsigned int baseAddress - The region base Address.
-*         unsigned int topAddress - The region top Address.
-* Returns: false if one of the parameters is erroneous true otherwise.
-*********************************************************************/
-bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
-			   unsigned int features, unsigned int baseAddress,
-			   unsigned int regionLength)
-{
-	unsigned int accessLow;
-	unsigned int accessHigh;
-	unsigned int accessTop = baseAddress + regionLength;
-
-	if (regionLength == 0) {	/* close the region. */
-		pciDisableAccessRegion (host, region);
-		return true;
-	}
-	/* base Address is store is bits [11:0] */
-	accessLow = (baseAddress & 0xfff00000) >> 20;
-	/* All the features are update according to the defines in pci.h (to be on
-	   the safe side we disable bits: [11:0] */
-	accessLow = accessLow | (features & 0xfffff000);
-	/* write to the Low Access Region register */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      accessLow);
-
-	accessHigh = (accessTop & 0xfff00000) >> 20;
-
-	/* write to the High Access Region register */
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
-		      accessHigh - 1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableAccessRegion - Disable The given Region by writing MAX size
-*                           to its low Address and MIN size to its high Address.
-*
-* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
-* Returns:  N/A.
-*********************************************************************/
-void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
-{
-	/* writing back the registers default values. */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      0x01001fff);
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
-}
-
-/********************************************************************
-* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciArbiterEnable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
-	return true;
-}
-
-/********************************************************************
-* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true
-*********************************************************************/
-bool pciArbiterDisable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
-	return true;
-}
-
-/********************************************************************
-* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
-*
-* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
-*           PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
-*           PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
-*           PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
-*           PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
-*           PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
-*           PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
-		(externalAgent1 << 9) + (externalAgent2 << 10) +
-		(externalAgent3 << 11) + (externalAgent4 << 12) +
-		(externalAgent5 << 13);
-	regData = (regData & 0xffffc07f) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
-	return true;
-}
-
-/********************************************************************
-* pciParkingDisable - Park on last option disable, with this function you can
-*                      disable the park on last mechanism for each agent.
-*                      disabling this option for all agents results parking
-*                      on the internal master.
-*
-* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
-*         PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-*         PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-*         PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-*         PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-*         PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-*         PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
-			PCI_AGENT_PARK externalAgent0,
-			PCI_AGENT_PARK externalAgent1,
-			PCI_AGENT_PARK externalAgent2,
-			PCI_AGENT_PARK externalAgent3,
-			PCI_AGENT_PARK externalAgent4,
-			PCI_AGENT_PARK externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
-		(externalAgent1 << 16) + (externalAgent2 << 17) +
-		(externalAgent3 << 18) + (externalAgent4 << 19) +
-		(externalAgent5 << 20);
-	regData = (regData & ~(0x7f << 14)) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
-*                       respond to grant assertion within a window specified in
-*                       the input value: 'brokenValue'.
-*
-* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
-*                       grant without asserting frame.
-* Returns:  Error for illegal broken value otherwise true.
-*********************************************************************/
-bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
-{
-	unsigned int data;
-	unsigned int regData;
-
-	if (brokenValue > 0xf)
-		return false;	/* brokenValue must be 4 bit */
-	data = brokenValue << 3;
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = (regData & 0xffffff87) | data;
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableBrokenAgentDetection - This function disable the Broken agent
-*                           Detection mechanism.
-*                           NOTE: This operation may cause a dead lock on the
-*                           pci0 arbitration.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciDisableBrokenAgentDetection (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = regData & 0xfffffffd;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciP2PConfig - This function set the PCI_n P2P configurate.
-*                 For more information on the P2P read PCI spec.
-*
-* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
-*                                      Boundry.
-*          unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
-*                                      Boundry.
-*          unsigned int busNum - The CPI bus number to which the PCI interface
-*                                      is connected.
-*          unsigned int devNum - The PCI interface's device number.
-*
-* Returns:  true.
-*********************************************************************/
-bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
-		   unsigned int SecondBusHigh,
-		   unsigned int busNum, unsigned int devNum)
-{
-	unsigned int regData;
-
-	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
-		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
-	GT_REG_WRITE (pci_p2p_configuration[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-*                          supports Cache Coherency in the PCI_n interface.
-* Inputs: region - One of the four regions.
-*         snoopType - There is four optional Types:
-*                        1. No Snoop.
-*                        2. Snoop to WT region.
-*                        3. Snoop to WB region.
-*                        4. Snoop & Invalidate to WB region.
-*         baseAddress - Base Address of this region.
-*         regionLength - Region length.
-* Returns: false if one of the parameters is wrong otherwise return true.
-*********************************************************************/
-bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
-			    PCI_SNOOP_TYPE snoopType,
-			    unsigned int baseAddress,
-			    unsigned int regionLength)
-{
-	unsigned int snoopXbaseAddress;
-	unsigned int snoopXtopAddress;
-	unsigned int data;
-	unsigned int snoopHigh = baseAddress + regionLength;
-
-	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
-		return false;
-	snoopXbaseAddress =
-		pci_snoop_control_base_0_low[host] + 0x10 * region;
-	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
-	if (regionLength == 0) {	/* closing the region */
-		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
-		GT_REG_WRITE (snoopXtopAddress, 0);
-		return true;
-	}
-	baseAddress = baseAddress & 0xfff00000;	/* Granularity of 1MByte */
-	data = (baseAddress >> 20) | snoopType << 12;
-	GT_REG_WRITE (snoopXbaseAddress, data);
-	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
-	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
-	return true;
-}
-
-static int gt_read_config_dword (struct pci_controller *hose,
-				 pci_dev_t dev, int offset, u32 * value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-					   PCI_DEV (dev));
-	} else {
-		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
-						     cfg_addr, offset,
-						     PCI_DEV (dev), bus);
-	}
-
-	return 0;
-}
-
-static int gt_write_config_dword (struct pci_controller *hose,
-				  pci_dev_t dev, int offset, u32 value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-				   PCI_DEV (dev), value);
-	} else {
-		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
-					     offset, PCI_DEV (dev), bus,
-					     value);
-	}
-	return 0;
-}
-
-
-static void gt_setup_ide (struct pci_controller *hose,
-			  pci_dev_t dev, struct pci_config_table *entry)
-{
-	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
-	u32 bar_response, bar_value;
-	int bar;
-
-	for (bar = 0; bar < 6; bar++) {
-		/*ronen different function for 3rd bank. */
-		unsigned int offset =
-			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
-
-		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
-					0x0);
-		pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
-				       &bar_response);
-
-		pciauto_region_allocate (bar_response &
-					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
-					 pci_io : hose->pci_mem, ide_bar[bar],
-					 &bar_value);
-
-		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
-					bar_value);
-	}
-}
-
-
-/* TODO BJW: Change this for DB64360. This was pulled from the EV64260  */
-/* and is curently not called *. */
-
-struct pci_config_table gt_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-
-	{}
-};
-
-struct pci_controller pci0_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-struct pci_controller pci1_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-void pci_init_board (void)
-{
-	unsigned int command;
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST0);
-#endif
-
-	pci0_hose.first_busno = 0;
-	pci0_hose.last_busno = 0xff;
-	local_buses[0] = pci0_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci0_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-	pci0_hose.region_count = 2;
-
-	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
-
-	pci_register_hose (&pci0_hose);
-	pciArbiterEnable (PCI_HOST0);
-	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
-	pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST1);
-#endif
-	pci1_hose.first_busno = pci0_hose.last_busno + 1;
-	pci1_hose.last_busno = 0xff;
-	pci1_hose.current_busno = pci1_hose.first_busno;
-	local_buses[1] = pci1_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci1_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-
-	pci1_hose.region_count = 2;
-
-	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
-
-	pci_register_hose (&pci1_hose);
-
-	pciArbiterEnable (PCI_HOST1);
-	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-	pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-}
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
deleted file mode 100644
index f04aaf9a6e..0000000000
--- a/board/Marvell/db64360/sdram_init.c
+++ /dev/null
@@ -1,1984 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64360 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
- ************************************************************************/
-
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../include/memory.h"
-#include "../include/pci.h"
-#include "../include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../common/i2c.h"
-#include "64360.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	DEBUG
-#define MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-int set_dfcdlInit (void);	/* setup delay line of Mv64360 */
-int mvDmaIsChannelActive (int);
-int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
-int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
-
-/* ------------------------------------------------------------------------- */
-
-int
-memory_map_bank (unsigned int bankNo,
-		 unsigned int bankBase, unsigned int bankLength)
-{
-#ifdef MAP_PCI
-	PCI_HOST host;
-#endif
-
-
-#ifdef DEBUG
-	if (bankLength > 0) {
-		printf ("mapping bank %d at %08x - %08x\n",
-			bankNo, bankBase, bankBase + bankLength - 1);
-	} else {
-		printf ("unmapping bank %d\n", bankNo);
-	}
-#endif
-
-	memoryMapBank (bankNo, bankBase, bankLength);
-
-#ifdef MAP_PCI
-	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
-		const int features =
-			PREFETCH_ENABLE |
-			DELAYED_READ_ENABLE |
-			AGGRESSIVE_PREFETCH |
-			READ_LINE_AGGRESSIVE_PREFETCH |
-			READ_MULTI_AGGRESSIVE_PREFETCH |
-			MAX_BURST_4 | PCI_NO_SWAP;
-
-		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
-		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
-				       bankLength);
-
-		pciSetRegionFeatures (host, bankNo, features, bankBase,
-				      bankLength);
-	}
-#endif
-	return 0;
-}
-
-#define GB	   (1 << 30)
-
-/* much of this code is based on (or is) the code in the pip405 port */
-/* thanks go to the authors of said port - Josh */
-
-/* structure to store the relevant information about an sdram bank */
-typedef struct sdram_info {
-	uchar drb_size;
-	uchar registered, ecc;
-	uchar tpar;
-	uchar tras_clocks;
-	uchar burst_len;
-	uchar banks, slot;
-} sdram_info_t;
-
-/* Typedefs for 'gtAuxilGetDIMMinfo' function */
-
-typedef enum _memoryType { SDRAM, DDR } MEMORY_TYPE;
-
-typedef enum _voltageInterface { TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
-	SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
-} VOLTAGE_INTERFACE;
-
-typedef enum _max_CL_supported_DDR { DDR_CL_1 = 1, DDR_CL_1_5 = 2, DDR_CL_2 =
-		4, DDR_CL_2_5 = 8, DDR_CL_3 = 16, DDR_CL_3_5 =
-		32, DDR_CL_FAULT } MAX_CL_SUPPORTED_DDR;
-typedef enum _max_CL_supported_SD { SD_CL_1 =
-		1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7,
-		SD_FAULT } MAX_CL_SUPPORTED_SD;
-
-
-/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo {
-	MEMORY_TYPE memoryType;
-	unsigned int numOfRowAddresses;
-	unsigned int numOfColAddresses;
-	unsigned int numOfModuleBanks;
-	unsigned int dataWidth;
-	VOLTAGE_INTERFACE voltageInterface;
-	unsigned int errorCheckType;	/* ECC , PARITY.. */
-	unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
-	unsigned int errorCheckDataWidth;	/* 0 - no, 1 - Yes */
-	unsigned int minClkDelay;
-	unsigned int burstLengthSupported;
-	unsigned int numOfBanksOnEachDevice;
-	unsigned int suportedCasLatencies;
-	unsigned int RefreshInterval;
-	unsigned int maxCASlatencySupported_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int maxCASlatencySupported_RoP;	/* RoP right of point (measured in ns) */
-	MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
-	MAX_CL_SUPPORTED_SD maxClSupported_SD;
-	unsigned int moduleBankDensity;
-	/* module attributes (true for yes) */
-	bool bufferedAddrAndControlInputs;
-	bool registeredAddrAndControlInputs;
-	bool onCardPLL;
-	bool bufferedDQMBinputs;
-	bool registeredDQMBinputs;
-	bool differentialClockInput;
-	bool redundantRowAddressing;
-
-	/* module general attributes */
-	bool suportedAutoPreCharge;
-	bool suportedPreChargeAll;
-	bool suportedEarlyRasPreCharge;
-	bool suportedWrite1ReadBurst;
-	bool suported5PercentLowVCC;
-	bool suported5PercentUpperVCC;
-	/* module timing parameters */
-	unsigned int minRasToCasDelay;
-	unsigned int minRowActiveRowActiveDelay;
-	unsigned int minRasPulseWidth;
-	unsigned int minRowPrechargeTime;	/* measured in ns */
-
-	int addrAndCommandHoldTime;	/* LoP left of point (measured in ns) */
-	int addrAndCommandSetupTime;	/* (measured in ns/100) */
-	int dataInputSetupTime; /* LoP left of point (measured in ns) */
-	int dataInputHoldTime;	/* LoP left of point (measured in ns) */
-/* tAC times for highest 2nd and 3rd highest CAS Latency values */
-	unsigned int clockToDataOut_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOut_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancy_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancy_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */
-
-	/* Parameters calculated from
-	   the extracted DIMM information */
-	unsigned int size;
-	unsigned int deviceDensity;	/* 16,64,128,256 or 512 Mbit */
-	unsigned int numberOfDevices;
-	uchar drb_size;		/* DRAM size in n*64Mbit */
-	uchar slot;		/* Slot Number this module is inserted in */
-	uchar spd_raw_data[128];	/* Content of SPD-EEPROM copied 1:1 */
-#ifdef DEBUG
-	uchar manufactura[8];	/* Content of SPD-EEPROM Byte 64-71 */
-	uchar modul_id[18];	/* Content of SPD-EEPROM Byte 73-90 */
-	uchar vendor_data[27];	/* Content of SPD-EEPROM Byte 99-125 */
-	unsigned long modul_serial_no;	/* Content of SPD-EEPROM Byte 95-98 */
-	unsigned int manufac_date;	/* Content of SPD-EEPROM Byte 93-94 */
-	unsigned int modul_revision;	/* Content of SPD-EEPROM Byte 91-92 */
-	uchar manufac_place;	/* Content of SPD-EEPROM Byte 72 */
-
-#endif
-} AUX_MEM_DIMM_INFO;
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NS10to10PS (unsigned char spd_byte)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NSto10PS (unsigned char spd_byte)
-{
-	return (spd_byte * 100);
-}
-
-/* This code reads the SPD chip on the sdram and populates
- * the array which is passed in with the relevant information */
-/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
-static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
-{
-	unsigned long spd_checksum;
-
-#ifdef ZUMA_NTL
-	/* zero all the values */
-	memset (info, 0, sizeof (*info));
-
-/*
-	if (!slot) {
-	    info->slot = 0;
-	    info->banks = 1;
-	    info->registered = 0;
-		    info->drb_size = 16;*/ /* 16 - 256MBit, 32 - 512MBit */
-/*	    info->tpar = 3;
-	    info->tras_clocks = 5;
-	    info->burst_len = 4;
-*/
-#ifdef CONFIG_MV64360_ECC
-	/* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
-	dimmInfo->errorCheckType = 2;
-/*	    info->ecc = 2;*/
-#endif
-}
-
-return 0;
-
-#else
-	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
-	int ret;
-	unsigned int i, j, density = 1, devicesForErrCheck = 0;
-
-#ifdef DEBUG
-	unsigned int k;
-#endif
-	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
-	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
-	uchar supp_cal, cal_val;
-	ulong memclk, tmemclk;
-	ulong tmp;
-	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
-	uchar data[128];
-
-	memclk = gd->bus_clk;
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-	DP (puts ("before i2c read\n"));
-
-	ret = i2c_read (addr, 0, 1, data, 128);
-
-	DP (puts ("after i2c read\n"));
-
-	/* zero all the values */
-	memset (dimmInfo, 0, sizeof (*dimmInfo));
-
-	/* copy the SPD content 1:1 into the dimmInfo structure */
-	for (i = 0; i <= 127; i++) {
-		dimmInfo->spd_raw_data[i] = data[i];
-	}
-
-	if (ret) {
-		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
-		return 0;
-	} else
-		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
-
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
-
-	for (i = 0; i <= 127; i++) {
-		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
-			data[i]);
-	}
-
-#endif
-#ifdef DEBUG
-/* find Manufactura of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
-		dimmInfo->manufactura[i] = data[64 + i];
-	}
-	printf ("\nThis RAM-Module is produced by:		%s\n",
-		dimmInfo->manufactura);
-
-/* find Manul-ID of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
-		dimmInfo->modul_id[i] = data[73 + i];
-	}
-	printf ("The Module-ID of this RAM-Module is:		%s\n",
-		dimmInfo->modul_id);
-
-/* find Vendor-Data of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
-		dimmInfo->vendor_data[i] = data[99 + i];
-	}
-	printf ("Vendor Data of this RAM-Module is:		%s\n",
-		dimmInfo->vendor_data);
-
-/* find modul_serial_no of Dimm Module */
-	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
-	printf ("Serial No. of this RAM-Module is:		%ld (%lx)\n",
-		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
-
-/* find Manufac-Data of Dimm Module */
-	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
-	printf ("Manufactoring Date of this RAM-Module is:	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
-
-/* find modul_revision of Dimm Module */
-	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
-	printf ("Module Revision of this RAM-Module is:			%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
-
-/* find manufac_place of Dimm Module */
-	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
-	printf ("manufac_place of this RAM-Module is:		%d\n",
-		dimmInfo->manufac_place);
-
-#endif
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-/* calculate SPD checksum */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	spd_checksum = 0;
-
-	for (i = 0; i <= 62; i++) {
-		spd_checksum += data[i];
-	}
-
-	if ((spd_checksum & 0xff) != data[63]) {
-		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
-		hang ();
-	}
-
-	else
-		printf ("SPD Checksum ok!\n");
-
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	for (i = 2; i <= 35; i++) {
-		switch (i) {
-		case 2: /* Memory type (DDR / SDRAM) */
-			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
-#ifdef DEBUG
-			if (dimmInfo->memoryType == 0)
-				DP (printf
-				    ("Dram_type in slot %d is:			SDRAM\n",
-				     dimmInfo->slot));
-			if (dimmInfo->memoryType == 1)
-				DP (printf
-				    ("Dram_type in slot %d is:			DDRAM\n",
-				     dimmInfo->slot));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 3: /* Number Of Row Addresses */
-			dimmInfo->numOfRowAddresses = data[i];
-			DP (printf
-			    ("Module Number of row addresses:		%d\n",
-			     dimmInfo->numOfRowAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 4: /* Number Of Column Addresses */
-			dimmInfo->numOfColAddresses = data[i];
-			DP (printf
-			    ("Module Number of col addresses:		%d\n",
-			     dimmInfo->numOfColAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 5: /* Number Of Module Banks */
-			dimmInfo->numOfModuleBanks = data[i];
-			DP (printf
-			    ("Number of Banks on Mod. :					%d\n",
-			     dimmInfo->numOfModuleBanks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 6: /* Data Width */
-			dimmInfo->dataWidth = data[i];
-			DP (printf
-			    ("Module Data Width:				%d\n",
-			     dimmInfo->dataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 8: /* Voltage Interface */
-			switch (data[i]) {
-			case 0x0:
-				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
-				DP (printf
-				    ("Module is						TTL_5V_TOLERANT\n"));
-				break;
-			case 0x1:
-				dimmInfo->voltageInterface = LVTTL;
-				DP (printf
-				    ("Module is						LVTTL\n"));
-				break;
-			case 0x2:
-				dimmInfo->voltageInterface = HSTL_1_5V;
-				DP (printf
-				    ("Module is						TTL_5V_TOLERANT\n"));
-				break;
-			case 0x3:
-				dimmInfo->voltageInterface = SSTL_3_3V;
-				DP (printf
-				    ("Module is						HSTL_1_5V\n"));
-				break;
-			case 0x4:
-				dimmInfo->voltageInterface = SSTL_2_5V;
-				DP (printf
-				    ("Module is						SSTL_2_5V\n"));
-				break;
-			default:
-				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
-				DP (printf
-				    ("Module is						VOLTAGE_UNKNOWN\n"));
-				break;
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 9: /* Minimum Cycle Time At Max CasLatancy */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
-				rightOfPoint;
-			DP (printf
-			    ("Minimum Cycle Time At Max CasLatancy:		%d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 10:	/* Clock To Data Out */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOut_LoP = leftOfPoint;
-			dimmInfo->clockToDataOut_RoP = rightOfPoint;
-			DP (printf ("Clock To Data Out:					%d.%2d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->clockToDataOut */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-/*#ifdef CONFIG_ECC */
-		case 11:	/* Error Check Type */
-			dimmInfo->errorCheckType = data[i];
-			DP (printf
-			    ("Error Check Type (0=NONE):			%d\n",
-			     dimmInfo->errorCheckType));
-			break;
-/* #endif */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 12:	/* Refresh Interval */
-			dimmInfo->RefreshInterval = data[i];
-			DP (printf
-			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
-			     dimmInfo->RefreshInterval));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 13:	/* Sdram Width */
-			dimmInfo->sdramWidth = data[i];
-			DP (printf
-			    ("Sdram Width:					%d\n",
-			     dimmInfo->sdramWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 14:	/* Error Check Data Width */
-			dimmInfo->errorCheckDataWidth = data[i];
-			DP (printf
-			    ("Error Check Data Width:			%d\n",
-			     dimmInfo->errorCheckDataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 15:	/* Minimum Clock Delay */
-			dimmInfo->minClkDelay = data[i];
-			DP (printf
-			    ("Minimum Clock Delay:				%d\n",
-			     dimmInfo->minClkDelay));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 16:	/* Burst Length Supported */
-			   /******-******-******-*******
-			   * bit3 | bit2 | bit1 | bit0 *
-			   *******-******-******-*******
-	    burst length = *  8	  |  4	 |   2	|   1  *
-			   *****************************
-
-	    If for example bit0 and bit2 are set, the burst
-	    length supported are 1 and 4. */
-
-			dimmInfo->burstLengthSupported = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Burst Length Supported:			"));
-			if (dimmInfo->burstLengthSupported & 0x01)
-				DP (printf ("1, "));
-			if (dimmInfo->burstLengthSupported & 0x02)
-				DP (printf ("2, "));
-			if (dimmInfo->burstLengthSupported & 0x04)
-				DP (printf ("4, "));
-			if (dimmInfo->burstLengthSupported & 0x08)
-				DP (printf ("8, "));
-			DP (printf (" Bit \n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 17:	/* Number Of Banks On Each Device */
-			dimmInfo->numOfBanksOnEachDevice = data[i];
-			DP (printf
-			    ("Number Of Banks On Each Chip:			%d\n",
-			     dimmInfo->numOfBanksOnEachDevice));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 18:	/* Suported Cas Latencies */
-
-			/*     DDR:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =	 * TBD	| TBD  | 3.5  |	  3  | 2.5  |  2   | 1.5  |   1	 *
-			 *********************************************************
-			 SDRAM:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =	 * TBD	|  7   |  6   |	 5   |	4   |  3   |   2  |   1	 *
-			 ********************************************************/
-			dimmInfo->suportedCasLatencies = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Suported Cas Latencies: (CL)			"));
-			if (dimmInfo->memoryType == 0) {	/* SDRAM */
-				for (k = 0; k <= 7; k++) {
-					if (dimmInfo->
-					    suportedCasLatencies & (1 << k))
-						DP (printf
-						    ("%d,			",
-						     k + 1));
-				}
-
-			} else {	/* DDR-RAM */
-
-				if (dimmInfo->suportedCasLatencies & 1)
-					DP (printf ("1, "));
-				if (dimmInfo->suportedCasLatencies & 2)
-					DP (printf ("1.5, "));
-				if (dimmInfo->suportedCasLatencies & 4)
-					DP (printf ("2, "));
-				if (dimmInfo->suportedCasLatencies & 8)
-					DP (printf ("2.5, "));
-				if (dimmInfo->suportedCasLatencies & 16)
-					DP (printf ("3, "));
-				if (dimmInfo->suportedCasLatencies & 32)
-					DP (printf ("3.5, "));
-
-			}
-			DP (printf ("\n"));
-#endif
-			/* Calculating MAX CAS latency */
-			for (j = 7; j > 0; j--) {
-				if (((dimmInfo->
-				      suportedCasLatencies >> j) & 0x1) ==
-				    1) {
-					switch (dimmInfo->memoryType) {
-					case DDR:
-						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
-						switch (j) {
-						case 7:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 6:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 5:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				3.5 clk's\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3_5;
-							break;
-						case 4:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				3 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3;
-							break;
-						case 3:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				2.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2_5;
-							break;
-						case 2:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				2 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2;
-							break;
-						case 1:
-							DP (printf
-							    ("Max. Cas Latencies (DDR):				1.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_1_5;
-							break;
-						}
-
-						/* ronen - in case we have a DIMM with minimumCycleTimeAtMaxCasLatancy
-						   lower then our SDRAM cycle count, we won't be able to support this CAL
-						   and we will have to use lower CAL. (minus - means from 3.0 to 2.5) */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								dimmInfo->
-								maxClSupported_DDR
-								>> 1;
-							DP (printf
-							    ("*** Change actual Cas Latencies cause of minimumCycleTime n"));
-						}
-						/* ronen - checkif the Dimm frequency compared to the Sysclock. */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							printf ("*********************************************************\n");
-							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
-							printf ("*********************************************************\n");
-							hang ();
-						}
-
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							=
-							1 +
-							(int) (5 * j / 10);
-						if (((5 * j) % 10) != 0)
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 5;
-						else
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation):	%d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					case SDRAM:
-						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
-						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded			*/
-						DP (printf
-						    ("Max. Cas Latencies (SD): %d\n",
-						     dimmInfo->
-						     maxClSupported_SD));
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							= j;
-						dimmInfo->
-							maxCASlatencySupported_RoP
-							= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					}
-					break;
-				}
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 21:	/* Buffered Address And Control Inputs */
-			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
-			dimmInfo->bufferedAddrAndControlInputs =
-				data[i] & BIT0;
-			dimmInfo->registeredAddrAndControlInputs =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
-			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
-			dimmInfo->registeredDQMBinputs =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->differentialClockInput =
-				(data[i] & BIT5) >> 5;
-			dimmInfo->redundantRowAddressing =
-				(data[i] & BIT6) >> 6;
-#ifdef DEBUG
-			if (dimmInfo->bufferedAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Buffered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Buffered Address/Control Input:		No \n"));
-
-			if (dimmInfo->registeredAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Registered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Registered Address/Control Input:		No \n"));
-
-			if (dimmInfo->onCardPLL == 1)
-				DP (printf
-				    (" - On-Card PLL (clock):				Yes \n"));
-			else
-				DP (printf
-				    (" - On-Card PLL (clock):				No \n"));
-
-			if (dimmInfo->bufferedDQMBinputs == 1)
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				Yes \n"));
-			else
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				No \n"));
-
-			if (dimmInfo->registeredDQMBinputs == 1)
-				DP (printf
-				    (" - Registered DQMB Inputs:			Yes \n"));
-			else
-				DP (printf
-				    (" - Registered DQMB Inputs:			No \n"));
-
-			if (dimmInfo->differentialClockInput == 1)
-				DP (printf
-				    (" - Differential Clock Input:			Yes \n"));
-			else
-				DP (printf
-				    (" - Differential Clock Input:			No \n"));
-
-			if (dimmInfo->redundantRowAddressing == 1)
-				DP (printf
-				    (" - redundant Row Addressing:			Yes \n"));
-			else
-				DP (printf
-				    (" - redundant Row Addressing:			No \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 22:	/* Suported AutoPreCharge */
-			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
-			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
-			dimmInfo->suportedAutoPreCharge =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->suportedPreChargeAll =
-				(data[i] & BIT2) >> 2;
-			dimmInfo->suportedWrite1ReadBurst =
-				(data[i] & BIT3) >> 3;
-			dimmInfo->suported5PercentLowVCC =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->suported5PercentUpperVCC =
-				(data[i] & BIT5) >> 5;
-#ifdef DEBUG
-			if (dimmInfo->suportedEarlyRasPreCharge == 1)
-				DP (printf
-				    (" - Early Ras Precharge:			Yes \n"));
-			else
-				DP (printf
-				    (" -  Early Ras Precharge:			No \n"));
-
-			if (dimmInfo->suportedAutoPreCharge == 1)
-				DP (printf
-				    (" - AutoPreCharge:				Yes \n"));
-			else
-				DP (printf
-				    (" -  AutoPreCharge:				No \n"));
-
-			if (dimmInfo->suportedPreChargeAll == 1)
-				DP (printf
-				    (" - Precharge All:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Precharge All:				No \n"));
-
-			if (dimmInfo->suportedWrite1ReadBurst == 1)
-				DP (printf
-				    (" - Write 1/ReadBurst:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Write 1/ReadBurst:				No \n"));
-
-			if (dimmInfo->suported5PercentLowVCC == 1)
-				DP (printf
-				    (" - lower VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    ("	- lower VCC tolerance:			10 Percent \n"));
-
-			if (dimmInfo->suported5PercentUpperVCC == 1)
-				DP (printf
-				    (" - upper VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    (" -  upper VCC tolerance:			10 Percent \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
-				rightOfPoint;
-			DP (printf ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (2nd CL value):			%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
-				rightOfPoint;
-			DP (printf ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (3rd CL value):			%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 27:	/* Minimum Row Precharge Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
-			trp_clocks =
-				(dimmInfo->minRowPrechargeTime +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
-			     tmemclk, tmemclk / 100, tmemclk % 100));
-			DP (printf
-			    ("Minimum Row Precharge Time [ns]:		%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 28:	/* Minimum Row Active to Row Active Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trrd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Row Active -To- Row Active Delay [ns]:	%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 29:	/* Minimum Ras-To-Cas Delay */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trcd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras-To-Cas Delay [ns]:			%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 30:	/* Minimum Ras Pulse Width */
-			dimmInfo->minRasPulseWidth = data[i];
-			tras_clocks =
-				(NSto10PS (data[i]) +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras Pulse Width [ns]:			%d = in Clk cycles %d\n",
-			     dimmInfo->minRasPulseWidth, tras_clocks));
-
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 31:	/* Module Bank Density */
-			dimmInfo->moduleBankDensity = data[i];
-			DP (printf
-			    ("Module Bank Density:				%d\n",
-			     dimmInfo->moduleBankDensity));
-#ifdef DEBUG
-			DP (printf
-			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
-			{
-				if (dimmInfo->moduleBankDensity & 1)
-					DP (printf ("4MB, "));
-				if (dimmInfo->moduleBankDensity & 2)
-					DP (printf ("8MB, "));
-				if (dimmInfo->moduleBankDensity & 4)
-					DP (printf ("16MB, "));
-				if (dimmInfo->moduleBankDensity & 8)
-					DP (printf ("32MB, "));
-				if (dimmInfo->moduleBankDensity & 16)
-					DP (printf ("64MB, "));
-				if (dimmInfo->moduleBankDensity & 32)
-					DP (printf ("128MB, "));
-				if ((dimmInfo->moduleBankDensity & 64)
-				    || (dimmInfo->moduleBankDensity & 128)) {
-					DP (printf ("ERROR, "));
-					hang ();
-				}
-			}
-			DP (printf ("\n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Setup Time [ns]:		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 33:	/* Address And Command Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Hold Time [ns]:		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 34:	/* Data Input Setup Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Setup Time [ns]:			%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 35:	/* Data Input Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Hold Time [ns]:			%d.%d\n\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-		}
-	}
-	/* calculating the sdram density */
-	for (i = 0;
-	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
-	     i++) {
-		density = density * 2;
-	}
-	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
-		dimmInfo->sdramWidth;
-	dimmInfo->numberOfDevices =
-		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
-		dimmInfo->numOfModuleBanks;
-	devicesForErrCheck =
-		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
-	if ((dimmInfo->errorCheckType == 0x1)
-	    || (dimmInfo->errorCheckType == 0x2)
-	    || (dimmInfo->errorCheckType == 0x3)) {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			(dimmInfo->numberOfDevices -
-			 /* ronen on the 1G dimm we get wrong value. (was devicesForErrCheck) */
-			 dimmInfo->numberOfDevices / 8);
-	} else {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			dimmInfo->numberOfDevices;
-	}
-
-	/* compute the module DRB size */
-	tmp = (1 <<
-	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
-	tmp *= dimmInfo->numOfModuleBanks;
-	tmp *= dimmInfo->sdramWidth;
-	tmp = tmp >> 24;	/* div by 0x4000000 (64M)	*/
-	dimmInfo->drb_size = (uchar) tmp;
-	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
-
-	/* try a CAS latency of 3 first... */
-
-	/* bit 1 is CL2, bit 2 is CL3 */
-	supp_cal = (dimmInfo->suportedCasLatencies & 0x6) >> 1;
-
-	cal_val = 0;
-	if (supp_cal & 3) {
-		if (NS10to10PS (data[9]) <= tmemclk)
-			cal_val = 3;
-	}
-
-	/* then 2... */
-	if (supp_cal & 2) {
-		if (NS10to10PS (data[23]) <= tmemclk)
-			cal_val = 2;
-	}
-
-	DP (printf ("cal_val = %d\n", cal_val));
-
-	/* bummer, did't work... */
-	if (cal_val == 0) {
-		DP (printf ("Couldn't find a good CAS latency\n"));
-		hang ();
-		return 0;
-	}
-
-	return true;
-
-#endif
-}
-
-/* sets up the GT properly with information passed in */
-int setup_sdram (AUX_MEM_DIMM_INFO * info)
-{
-	ulong tmp, check;
-	ulong tmp_sdram_mode = 0;	/* 0x141c */
-	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
-	int i;
-
-	/* added 8/21/2003 P. Marchese */
-	unsigned int sdram_config_reg;
-
-	/* added 10/10/2003 P. Marchese */
-	ulong sdram_chip_size;
-
-	/* sanity checking */
-	if (!info->numOfModuleBanks) {
-		printf ("setup_sdram called with 0 banks\n");
-		return 1;
-	}
-
-	/* delay line */
-	set_dfcdlInit ();	/* may be its not needed */
-	DP (printf ("Delay line set done\n"));
-
-	/* set SDRAM mode NOP */ /* To_do check it */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
-	}
-
-	/* SDRAM configuration */
-/* added 8/21/2003 P. Marchese */
-/* code allows usage of registered DIMMS */
-
-	/* figure out the memory refresh internal */
-	switch (info->RefreshInterval) {
-	case 0x0:
-	case 0x80:		/* refresh period is 15.625 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
-					/ (float) 1000000.0);
-		break;
-	case 0x1:
-	case 0x81:		/* refresh period is 3.9 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x2:
-	case 0x82:		/* refresh period is 7.8 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x3:
-	case 0x83:		/* refresh period is 31.3 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x4:
-	case 0x84:		/* refresh period is 62.5 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x5:
-	case 0x85:		/* refresh period is 125 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	default:		/* refresh period undefined */
-		printf ("DRAM refresh period is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-	DP (printf ("calculated refresh interval %0x\n", sdram_config_reg));
-
-	/* make sure the refresh value is only 14 bits */
-	if (sdram_config_reg > 0x1fff)
-		sdram_config_reg = 0x1fff;
-	DP (printf ("adjusted refresh interval %0x\n", sdram_config_reg));
-
-	/* we want physical bank interleaving and */
-	/* virtual bank interleaving enabled so do nothing */
-	/* since these bits need to be zero to enable the interleaving */
-
-	/*  registered DRAM ? */
-	if (info->registeredAddrAndControlInputs == 1) {
-		/* it's registered DRAM, so set the reg. DRAM bit */
-		sdram_config_reg = sdram_config_reg | BIT17;
-		DP (printf ("Enabling registered DRAM bit\n"));
-	}
-	/* turn on DRAM ECC? */
-#ifdef CONFIG_MV64360_ECC
-	if (info->errorCheckType == 0x2) {
-		/* DRAM has ECC, so turn it on */
-		sdram_config_reg = sdram_config_reg | BIT18;
-		DP (printf ("Enabling ECC\n"));
-	}
-#endif
-	/* set the data DQS pin configuration */
-	switch (info->sdramWidth) {
-	case 0x4:		/* memory is x4 */
-		sdram_config_reg = sdram_config_reg | BIT20 | BIT21;
-		DP (printf ("Data DQS pins set for 16 pins\n"));
-		break;
-	case 0x8:		/* memory is x8 or x16 */
-	case 0x10:
-		sdram_config_reg = sdram_config_reg | BIT21;
-		DP (printf ("Data DQS pins set for 8 pins\n"));
-		break;
-	case 0x20:		/* memory is x32 */
-		/* both bits are cleared for x32 so nothing to do */
-		DP (printf ("Data DQS pins set for 2 pins\n"));
-		break;
-	default:		/* memory width unsupported */
-		printf ("DRAM chip width is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-
-	/* perform read buffer assignments */
-	/* we are going to use the Power-up defaults */
-	/* bit 26 = CPU = buffer 1 */
-	/* bit 27 = PCI bus #0 = buffer 0 */
-	/* bit 28 = PCI bus #1 = buffer 0 */
-	/* bit 29 = MPSC = buffer 0 */
-	/* bit 30 = IDMA = buffer 0 */
-	/* bit 31 = Gigabit = buffer 0 */
-	sdram_config_reg = sdram_config_reg | BIT26;
-	/*  sdram_config_reg = sdram_config_reg | 0x58000000; */
-	/* sdram_config_reg = sdram_config_reg & 0xffffff00;  */
-
-	/* write the value into the SDRAM configuration register */
-	GT_REG_WRITE (SDRAM_CONFIG, sdram_config_reg);
-	DP (printf
-	    ("OOOOOOOOO sdram_conf 0x1400: %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM open pages control keep open as much as I can */
-	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
-	DP (printf
-	    ("sdram_open_pages_controll 0x1414: %08x\n",
-	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
-	if (tmp == 0)
-		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
-	else
-		DP (printf
-		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
-
-	/* SDRAM set CAS Latency according to SPD information */
-	switch (info->memoryType) {
-	case SDRAM:
-		printf ("### SD-RAM not supported !!!\n");
-		printf ("Aborting!!!\n");
-		hang ();
-		/* ToDo fill SD-RAM if needed !!!!! */
-		break;
-		/* Calculate the settings for SDRAM mode and Dunit control low registers */
-		/* Values set according to technical bulletin TB-92 rev. c */
-	case DDR:
-		DP (printf ("### SET-CL for DDR-RAM\n"));
-		switch (info->maxClSupported_DDR) {
-		case DDR_CL_3:
-			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x05110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				DP (printf
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x2C1107F2;
-				else
-					tmp_dunit_control_low = 0x3C1107d2;
-				DP (printf
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_2_5:
-			tmp_sdram_mode = 0x62;	/* CL=2.5 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x25110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				DP (printf
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 2.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x1B1107d2;
-				DP (printf
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_2:
-			tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x04110051;
-				else
-					tmp_dunit_control_low = 0x03110051;
-				DP (printf
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 2, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x3B1107d2;
-				DP (printf
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_1_5:
-			tmp_sdram_mode = 0x52;	/* CL=1.5 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x24110051;
-				else
-					tmp_dunit_control_low = 0x23110051;
-				DP (printf
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 1.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x1A1107d2;
-				DP (printf
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-
-		default:
-			printf ("Max. CL is out of range %d\n",
-				info->maxClSupported_DDR);
-			hang ();
-			break;
-		}		/* end DDR switch */
-		break;
-	}			/* end CL switch */
-
-	/* Write results of CL detection procedure */
-	/* set SDRAM mode reg. 0x141c */
-	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 0x1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
-	}
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	GT_REG_WRITE (D_UNIT_CONTROL_LOW, tmp_dunit_control_low);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
-	}
-
-/*------------------------------------------------------------------------------ */
-
-	/* bank parameters */
-	/* SDRAM address decode register 0x1410 */
-	/* program this with the default value */
-	tmp = 0x02;		/* power-up default address select decoding value */
-
-	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
-/* figure out the DRAM chip size */
-	sdram_chip_size =
-		(1 << (info->numOfRowAddresses + info->numOfColAddresses));
-	sdram_chip_size *= info->sdramWidth;
-	sdram_chip_size *= 4;
-	DP (printf ("computed sdram chip size is %#lx\n", sdram_chip_size));
-	/* divide sdram chip size by 64 Mbits */
-	sdram_chip_size = sdram_chip_size / 0x4000000;
-	switch (sdram_chip_size) {
-	case 1:		/* 64 Mbit */
-	case 2:		/* 128 Mbit */
-		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
-		tmp |= (0x00 << 4);
-		break;
-	case 4:		/* 256 Mbit */
-	case 8:		/* 512 Mbit */
-		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
-		tmp |= (0x01 << 4);
-		break;
-	case 16:		/* 1 Gbit */
-	case 32:		/* 2 Gbit */
-		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
-		tmp |= (0x02 << 4);
-		break;
-	default:
-		printf ("Error in dram size calculation\n");
-		printf ("RAM-Device_size is unsupported\n");
-		hang ();
-	}
-
-	/* SDRAM address control */
-	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
-	DP (printf
-	    ("setting up sdram address control (0x1410) with: %08lx \n",
-	     tmp));
-
-/* ------------------------------------------------------------------------------ */
-/* same settings for registerd & non-registerd DDR SDRAM */
-	DP (printf
-	    ("setting up sdram_timing_control_low (0x1408) with: %08x \n",
-	     0x11511220));
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
-
-
-/* ------------------------------------------------------------------------------ */
-
-	/* SDRAM configuration */
-	tmp = GTREGREAD (SDRAM_CONFIG);
-
-	if (info->registeredAddrAndControlInputs
-	    || info->registeredDQMBinputs) {
-		tmp |= (1 << 17);
-		DP (printf
-		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
-		     info->registeredAddrAndControlInputs,
-		     info->registeredDQMBinputs));
-	}
-
-	/* Use buffer 1 to return read data to the CPU
-	 * Page 426 MV64360 */
-	tmp |= (1 << 26);
-	DP (printf
-	    ("Before Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-	DP (printf
-	    ("After Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM timing To_do: */
-/* ------------------------------------------------------------------------------ */
-
-	DP (printf
-	    ("setting up sdram_timing_control_high (0x140c) with: %08x \n",
-	     0x9));
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_HIGH, 0x9);
-
-	DP (printf
-	    ("setting up sdram address pads control (0x14c0) with: %08x \n",
-	     0x7d5014a));
-	GT_REG_WRITE (SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x7d5014a);
-
-	DP (printf
-	  indent: Standard input:1450: Warning:old style assignment ambiguity in "=*".	Assuming "= *"
-
-indent: Standard input:1451: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
-
-  ("setting up sdram data pads control (0x14c4) with: %08x \n",
-	     0x7d5014a));
-	GT_REG_WRITE (SDRAM_DATA_PADS_CALIBRATION, 0x7d5014a);
-
-/* ------------------------------------------------------------------------------ */
-
-	/* set the SDRAM configuration for each bank */
-
-/*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
-	{
-		i = info->slot;
-		DP (printf
-		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
-
-		/* map the bank */
-		memory_map_bank (i, 0, GB / 4);
-
-		/* set SDRAM mode */ /* To_do check it */
-		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-
-
-		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-
-		/* unmap the bank */
-		memory_map_bank (i, 0, 0);
-	}
-
-	return 0;
-
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int dram_size (long int *base, long int maxsize)
-{
-	volatile long int *addr, *b = base;
-	long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20)	/* start test at 1M */
-	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
-	     cnt <<= 1) {
-		addr = base + cnt;	/* pointer arith! */
-
-		save1 = *addr;	/* save contents of addr */
-		save2 = *b;	/* save contents of base */
-
-		*addr = cnt;	/* write cnt to addr */
-		*b = 0;		/* put null at base */
-
-		/* check at base address */
-		if ((*b) != 0) {
-			*addr = save1;	/* restore *addr */
-			*b = save2;	/* restore *b */
-			return (0);
-		}
-		val = *addr;	/* read *addr */
-		val = *addr;	/* read *addr */
-
-		*addr = save1;
-		*b = save2;
-
-		if (val != cnt) {
-			DP (printf
-			    ("Found %08x  at Address %08x (failure)\n",
-			     (unsigned int) val, (unsigned int) addr));
-			/* fix boundary condition.. STARTVAL means zero */
-			if (cnt == STARTVAL / sizeof (long))
-				cnt = 0;
-			return (cnt * sizeof (long));
-		}
-	}
-	return maxsize;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* ppcboot interface function to SDRAM init - this is where all the
- * controlling logic happens */
-long int initdram (int board_type)
-{
-	int s0 = 0, s1 = 0;
-	int checkbank[4] = {[0 ... 3] = 0 };
-	ulong realsize, total, check;
-	AUX_MEM_DIMM_INFO dimmInfo1;
-	AUX_MEM_DIMM_INFO dimmInfo2;
-	int nhr, bank_no;
-	ulong dest, memSpaceAttr;
-
-	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
-
-	/* check the NHR bit and skip mem init if it's already done */
-	nhr = get_hid0 () & (1 << 16);
-
-	if (nhr) {
-		printf ("Skipping SD- DDRRAM setup due to NHR bit being set\n");
-	} else {
-		/* DIMM0 */
-		s0 = check_dimm (0, &dimmInfo1);
-
-		/* DIMM1 */
-		s1 = check_dimm (1, &dimmInfo2);
-
-		memory_map_bank (0, 0, 0);
-		memory_map_bank (1, 0, 0);
-		memory_map_bank (2, 0, 0);
-		memory_map_bank (3, 0, 0);
-
-		/* ronen check correct set of DIMMS */
-		if (dimmInfo1.numOfModuleBanks && dimmInfo2.numOfModuleBanks) {
-			if (dimmInfo1.errorCheckType !=
-			    dimmInfo2.errorCheckType)
-				printf ("***WARNNING***!!!! different ECC support of the DIMMS\n");
-			if (dimmInfo1.maxClSupported_DDR !=
-			    dimmInfo2.maxClSupported_DDR)
-				printf ("***WARNNING***!!!! different CAL setting of the DIMMS\n");
-			if (dimmInfo1.registeredAddrAndControlInputs !=
-			    dimmInfo2.registeredAddrAndControlInputs)
-				printf ("***WARNNING***!!!! different Registration setting of the DIMMS\n");
-		}
-
-		if (dimmInfo1.numOfModuleBanks && setup_sdram (&dimmInfo1)) {
-			printf ("Setup for DIMM1 failed.\n");
-		}
-
-		if (dimmInfo2.numOfModuleBanks && setup_sdram (&dimmInfo2)) {
-			printf ("Setup for DIMM2 failed.\n");
-		}
-
-		/* set the NHR bit */
-		set_hid0 (get_hid0 () | (1 << 16));
-	}
-	/* next, size the SDRAM banks */
-
-	realsize = total = 0;
-	check = GB / 4;
-	if (dimmInfo1.numOfModuleBanks > 0) {
-		checkbank[0] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 1) {
-		checkbank[1] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM1 has >2 banks\n");
-
-	printf ("-- DIMM1 has %d banks\n", dimmInfo1.numOfModuleBanks);
-
-	if (dimmInfo2.numOfModuleBanks > 0) {
-		checkbank[2] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 1) {
-		checkbank[3] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM2 has >2 banks\n");
-
-	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
-
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
-		/* skip over banks that are not populated */
-		if (!checkbank[bank_no])
-			continue;
-
-		/* ronen - realsize = dram_size((long int *)total, check); */
-		if (bank_no == 0 || bank_no == 1) {
-			if (checkbank[1] == 1)
-				realsize = dimmInfo1.size / 2;
-			else
-				realsize = dimmInfo1.size;
-		}
-		if (bank_no == 2 || bank_no == 3) {
-			if (checkbank[3] == 1)
-				realsize = dimmInfo2.size / 2;
-			else
-				realsize = dimmInfo2.size;
-		}
-		memory_map_bank (bank_no, total, realsize);
-
-		/* ronen - initialize the DRAM for ECC */
-#ifdef CONFIG_MV64360_ECC
-		if ((dimmInfo1.errorCheckType != 0) &&
-		    ((dimmInfo2.errorCheckType != 0)
-		     || (dimmInfo2.numOfModuleBanks == 0))) {
-			printf ("ECC Initialization of Bank %d:", bank_no);
-			memSpaceAttr = ((~(BIT0 << bank_no)) & 0xf) << 8;
-			mvDmaSetMemorySpace (0, 0, memSpaceAttr, total,
-					     realsize);
-			for (dest = total; dest < total + realsize;
-			     dest += _8M) {
-				mvDmaTransfer (0, total, dest, _8M,
-					       BIT8 /*DMA_DTL_128BYTES */  |
-					       BIT3 /*DMA_HOLD_SOURCE_ADDR */
-					       |
-					       BIT11
-					       /*DMA_BLOCK_TRANSFER_MODE */ );
-				while (mvDmaIsChannelActive (0));
-			}
-			printf (" PASS\n");
-		}
-#endif
-
-		total += realsize;
-	}
-
-	/* ronen- add DRAM conf prints */
-	switch ((GTREGREAD (0x141c) >> 4) & 0x7) {
-	case 0x2:
-		printf ("CAS Latency = 2");
-		break;
-	case 0x3:
-		printf ("CAS Latency = 3");
-		break;
-	case 0x5:
-		printf ("CAS Latency = 1.5");
-		break;
-	case 0x6:
-		printf ("CAS Latency = 2.5");
-		break;
-	}
-	printf (" tRP = %d tRAS = %d tRCD=%d\n",
-		((GTREGREAD (0x1408) >> 8) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 20) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 4) & 0xf) + 1);
-
-/*	Setup Ethernet DMA Adress window to DRAM Area */
-	if (total > _256M)
-		printf ("*** ONLY the first 256MB DRAM memory are used out of the ");
-	else
-		printf ("Total SDRAM memory is ");
-	/* (cause all the 4 BATS are taken) */
-	return (total);
-}
-
-
-/* ronen- add Idma functions for usage of the ecc dram init. */
-/*******************************************************************************
-* mvDmaIsChannelActive - Checks if a engine is busy.
-********************************************************************************/
-int mvDmaIsChannelActive (int engine)
-{
-	ulong data;
-
-	data = GTREGREAD (MV64360_DMA_CHANNEL0_CONTROL + 4 * engine);
-	if (data & BIT14 /*activity status */ ) {
-		return 1;
-	}
-	return 0;
-}
-
-/*******************************************************************************
-* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
-*			map.
-*******************************************************************************/
-int mvDmaSetMemorySpace (ulong memSpace,
-			 ulong memSpaceTarget,
-			 ulong memSpaceAttr, ulong baseAddress, ulong size)
-{
-	ulong temp;
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return 0;
-	}
-	if (size >= 0x10000 /*64K */ ) {
-		size &= 0xffff0000;
-		baseAddress = (baseAddress & 0xffff0000);
-		/* Set the new attributes */
-		GT_REG_WRITE (MV64360_DMA_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64360_DMA_SIZE_REG0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		temp = GTREGREAD (MV64360_DMA_BASE_ADDR_ENABLE_REG);
-		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
-			      (temp & ~(BIT0 << memSpace)));
-		return 1;
-	}
-	return 0;
-}
-
-
-/*******************************************************************************
-* mvDmaTransfer - Transfer data from sourceAddr to destAddr on one of the 4
-*		  DMA channels.
-********************************************************************************/
-int mvDmaTransfer (int engine, ulong sourceAddr,
-		   ulong destAddr, ulong numOfBytes, ulong command)
-{
-	ulong engOffReg = 0;	/* Engine Offset Register */
-
-	if (numOfBytes > 0xffff) {
-		command = command | BIT31 /*DMA_16M_DESCRIPTOR_MODE */ ;
-	}
-	command = command | ((command >> 6) & 0x7);
-	engOffReg = engine * 4;
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_BYTE_COUNT + engOffReg,
-		      numOfBytes);
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_SOURCE_ADDR + engOffReg,
-		      sourceAddr);
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg,
-		      destAddr);
-	command =
-		command | BIT12 /*DMA_CHANNEL_ENABLE */	 | BIT9
-		/*DMA_NON_CHAIN_MODE */ ;
-	/* Activate DMA engine By writting to mvDmaControlRegister */
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_CONTROL + engOffReg, command);
-	return 1;
-}
-
-/****************************************************************************************
- *				SDRAM INIT						*
- *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
- *		  This procedure fits only the Atlantis					*
- *											*
- ***************************************************************************************/
-
-
-/****************************************************************************************
- *				DFCDL initialize MV643xx Design Considerations		*
- *											*
- ***************************************************************************************/
-int set_dfcdlInit (void)
-{
-	int i;
-	unsigned int dfcdl_word = 0x391;	/*   0x14f;  ronen new dfcdl */
-
-	for (i = 0; i < 64; i++) {
-		GT_REG_WRITE (SRAM_DATA0, dfcdl_word);
-/*	dfcdl_word += 0x41;  - ronen new dfcdl */
-	}
-	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
-
-	return (0);
-}
diff --git a/board/Marvell/db64360/u-boot.lds b/board/Marvell/db64360/u-boot.lds
deleted file mode 100644
index d89eb6cff2..0000000000
--- a/board/Marvell/db64360/u-boot.lds
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/74xx_7xx/start.o	(.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/*    . = env_offset; */
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/Marvell/db64460/64460.h b/board/Marvell/db64460/64460.h
deleted file mode 100644
index 8bb0ebfd21..0000000000
--- a/board/Marvell/db64460/64460.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * main board support/init for the Galileo Eval board DB64460.
- */
-
-#ifndef __64460_H__
-#define __64460_H__
-
-/* CPU Configuration bits */
-#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
-#define	CPU_CONF_SINGLE_CPU	(1 << 11)
-#define	CPU_CONF_ENDIANESS	(1 << 12)
-#define CPU_CONF_PIPELINE	(1 << 13)
-#define CPU_CONF_STOP_RETRY	(1 << 17)
-#define CPU_CONF_MULTI_DECODE	(1 << 18)
-#define CPU_CONF_DP_VALID	(1 << 19)
-#define CPU_CONF_PERR_PROP	(1 << 22)
-#define CPU_CONF_AACK_DELAY_2	(1 << 25)
-#define CPU_CONF_AP_VALID	(1 << 26)
-#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
-
-/* CPU Master Control bits */
-#define CPU_MAST_CTL_ARB_EN	(1 << 8)
-#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
-#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
-#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
-#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
-#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
-
-#endif /* __64460_H__ */
diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile
deleted file mode 100644
index 641a0ab860..0000000000
--- a/board/Marvell/db64460/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-SOBJS	= ../common/misc.o
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
-	  mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
-	  sdram_init.o ../common/intel_flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/Marvell/db64460/config.mk b/board/Marvell/db64460/config.mk
deleted file mode 100644
index 5a434d9bca..0000000000
--- a/board/Marvell/db64460/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EVB64460 boards
-#
-
-TEXT_BASE = 0xfff00000
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
deleted file mode 100644
index a915049477..0000000000
--- a/board/Marvell/db64460/db64460.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * modifications for the DB64460 eval board based by Ingo.Assmus@keymile.com
- */
-
-/*
- * db64460.c - main board support/init for the Galileo Eval board.
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../include/memory.h"
-#include "../include/pci.h"
-#include "../include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "i2c.h"
-#include "64460.h"
-#include "mv_regs.h"
-
-#undef	DEBUG
-/*#define	DEBUG */
-
-#define	MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-
-/* ------------------------------------------------------------------------- */
-
-/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
-
-/* Unfortunately, we cant change it while we are in flash, so we initialize it
- * to the "final" value. This means that any debug_led calls before
- * board_early_init_f wont work right (like in cpu_init_f).
- * See also my_remap_gt_regs below. (NTL)
- */
-
-void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
-int display_mem_map (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This is a version of the GT register space remapping function that
- * doesn't touch globals (meaning, it's ok to run from flash.)
- *
- * Unfortunately, this has the side effect that a writable
- * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
- */
-
-void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	/* check and see if it's already moved */
-
-/* original ppcboot 1.1.6 source
-
-	temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 20)
-		return;
-
-	temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 20);
-
-	out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
-original ppcboot 1.1.6 source end */
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
-}
-
-#ifdef CONFIG_PCI
-
-static void gt_pci_config (void)
-{
-	unsigned int stat;
-	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
-
-	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
-	 * config registers by writing ones to the bus and device.
-	 * We then update the Virtual register with the correct value for the bus and device.
-	 */
-	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-
-		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-
-	}
-	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-	}
-
-	/* Enable master */
-	PCI_MASTER_ENABLE (0, SELF);
-	PCI_MASTER_ENABLE (1, SELF);
-
-	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
-	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
-	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
-									     <<
-									     18);
-	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
-	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
-
-	/* ronen- add write to pci remap registers for 64460.
-	   in 64360 when writing to pci base go and overide remap automaticaly,
-	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
-
-	/* PCI interface settings */
-	/* Timeout set to retry forever */
-	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
-	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
-
-	/* ronen - enable only CS0 and Internal reg!! */
-	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-
-/*ronen update the pci internal registers base address.*/
-#ifdef MAP_PCI
-	for (stat = 0; stat <= PCI_HOST1; stat++)
-		pciWriteConfigReg (stat,
-				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
-#endif
-
-}
-#endif
-
-/* Setup CPU interface paramaters */
-static void gt_cpu_config (void)
-{
-	cpu_t cpu = get_cpu_type ();
-	ulong tmp;
-
-	/* cpu configuration register */
-	tmp = GTREGREAD (CPU_CONFIGURATION);
-
-	/* set the SINGLE_CPU bit  see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
-	tmp |= CPU_CONF_SINGLE_CPU;
-#endif
-
-	tmp &= ~CPU_CONF_AACK_DELAY_2;
-
-	tmp |= CPU_CONF_DP_VALID;
-	tmp |= CPU_CONF_AP_VALID;
-
-	tmp |= CPU_CONF_PIPELINE;
-
-	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
-
-	/* CPU master control register */
-	tmp = GTREGREAD (CPU_MASTER_CONTROL);
-
-	tmp |= CPU_MAST_CTL_ARB_EN;
-
-	if ((cpu == CPU_7400) ||
-	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
-
-		tmp |= CPU_MAST_CTL_CLEAN_BLK;
-		tmp |= CPU_MAST_CTL_FLUSH_BLK;
-
-	} else {
-		/* cleanblock must be cleared for CPUs
-		 * that do not support this command (603e, 750)
-		 * see Res#1 */
-		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
-		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
-	}
-	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
-}
-
-/*
- * board_early_init_f.
- *
- * set up gal. device mappings, etc.
- */
-int board_early_init_f (void)
-{
-	uchar sram_boot = 0;
-
-	/*
-	 * set up the GT the way the kernel wants it
-	 * the call to move the GT register space will obviously
-	 * fail if it has already been done, but we're going to assume
-	 * that if it's not at the power-on location, it's where we put
-	 * it last time. (huber)
-	 */
-
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
-
-	/* No PCI in first release of Port To_do: enable it. */
-#ifdef CONFIG_PCI
-	gt_pci_config ();
-#endif
-	/* mask all external interrupt sources */
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
-	/* new in MV6446x */
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
-	/* --------------------- */
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	/* does not exist in MV6446x
-	   GT_REG_WRITE(CPU_INT_0_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_1_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_2_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_3_MASK, 0);
-	   --------------------- */
-
-
-	/* ----- DEVICE BUS SETTINGS ------ */
-
-	/*
-	 * EVB
-	 * 0 - SRAM   ????
-	 * 1 - RTC      ????
-	 * 2 - UART     ????
-	 * 3 - Flash    checked 32Bit Intel Strata
-	 * boot - BootCS checked 8Bit 29LV040B
-	 *
-	 * Zuma
-	 * 0 - Flash
-	 * boot - BootCS
-	 */
-
-	/*
-	 * the dual 7450 module requires burst access to the boot
-	 * device, so the serial rom copies the boot device to the
-	 * on-board sram on the eval board, and updates the correct
-	 * registers to boot from the sram. (device0)
-	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
-		sram_boot = 1;
-	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
-
-
-	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
-	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
-#endif
-
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
-#endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
-#endif
-
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
-	/* detect if we are booting from the 32 bit flash */
-	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
-		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
-	} else {
-		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
-	}
-#else
-	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
-#endif
-
-
-	gt_cpu_config ();
-
-	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
-
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
-	DEBUG_LED0_ON ();
-	DEBUG_LED1_ON ();
-	DEBUG_LED2_ON ();
-
-	return 0;
-}
-
-/* various things to do after relocation */
-
-int misc_init_r ()
-{
-	icache_enable ();
-#ifdef CFG_L2
-	l2cache_enable ();
-#endif
-#ifdef CONFIG_MPSC
-
-	mpsc_sdma_init ();
-	mpsc_init2 ();
-#endif
-
-	return 0;
-}
-
-void after_reloc (ulong dest_addr, gd_t * gd)
-{
-	/* check to see if we booted from the sram.  If so, move things
-	 * back to the way they should be. (we're running from main
-	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
-	}
-	display_mem_map ();
-	/* now, jump to the main ppcboot board init code */
-	board_init_r (gd, dest_addr);
-	/* NOTREACHED */
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- *
- * right now, assume borad type. (there is just one...after all)
- */
-
-int checkboard (void)
-{
-	int l_type = 0;
-
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
-	return (l_type);
-}
-
-/* utility functions */
-void debug_led (int led, int mode)
-{
-	volatile int *addr = 0;
-	int dummy;
-
-	if (mode == 1) {
-		switch (led) {
-		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x08000);
-			break;
-
-		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x0c000);
-			break;
-
-		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x10000);
-			break;
-		}
-	} else if (mode == 0) {
-		switch (led) {
-		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x14000);
-			break;
-
-		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x18000);
-			break;
-
-		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
-					0x1c000);
-			break;
-		}
-	}
-
-	dummy = *addr;
-}
-
-int display_mem_map (void)
-{
-	int i, j;
-	unsigned int base, size, width;
-
-	/* SDRAM */
-	printf ("SD (DDR) RAM\n");
-	for (i = 0; i <= BANK3; i++) {
-		base = memoryGetBankBaseAddress (i);
-		size = memoryGetBankSize (i);
-		if (size != 0) {
-			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
-				i, base, size >> 20);
-		}
-	}
-
-	/* CPU's PCI windows */
-	for (i = 0; i <= PCI_HOST1; i++) {
-		printf ("\nCPU's PCI %d windows\n", i);
-		base = pciGetSpaceBase (i, PCI_IO);
-		size = pciGetSpaceSize (i, PCI_IO);
-		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
-			size >> 20);
-		for (j = 0;
-		     j <=
-		     PCI_REGION0
-		     /*ronen currently only first PCI MEM is used 3 */ ;
-		     j++) {
-			base = pciGetSpaceBase (i, j);
-			size = pciGetSpaceSize (i, j);
-			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
-		}
-	}
-
-	/* Devices */
-	printf ("\nDEVICES\n");
-	for (i = 0; i <= DEVICE3; i++) {
-		base = memoryGetDeviceBaseAddress (i);
-		size = memoryGetDeviceSize (i);
-		width = memoryGetDeviceWidth (i) * 8;
-		printf ("DEV %d:  base - 0x%08x  size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
-		if (i == 0)
-			printf ("\t- EXT SRAM (actual - 1M)\n");
-		else if (i == 1)
-			printf ("\t- RTC\n");
-		else if (i == 2)
-			printf ("\t- UART\n");
-		else
-			printf ("\t- LARGE FLASH\n");
-	}
-
-	/* Bootrom */
-	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
-	size = memoryGetDeviceSize (BOOT_DEVICE);
-	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
-	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\n",
-		base, size >> 20, width);
-	return (0);
-}
-
-/* DRAM check routines copied from gw8260 */
-
-#if defined (CFG_DRAM_TEST)
-
-/*********************************************************************/
-/* NAME:  move64() -  moves a double word (64-bit)		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   this function performs a double word move from the data at	     */
-/*   the source pointer to the location at the destination pointer.  */
-/*								     */
-/* INPUTS:							     */
-/*   unsigned long long *src  - pointer to data to move		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   unsigned long long *dest - pointer to locate to move data	     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   May cloober fr0.						     */
-/*								     */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
-	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
-	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
-      : : : "fr0");		/* Clobbers fr0         */
-	return;
-}
-
-
-#if defined (CFG_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaaULL,
-	0xccccccccccccccccULL,
-	0xf0f0f0f0f0f0f0f0ULL,
-	0xff00ff00ff00ff00ULL,
-	0xffff0000ffff0000ULL,
-	0xffffffff00000000ULL,
-	0x00000000ffffffffULL,
-	0x0000ffff0000ffffULL,
-	0x00ff00ff00ff00ffULL,
-	0x0f0f0f0f0f0f0f0fULL,
-	0x3333333333333333ULL,
-	0x5555555555555555ULL,
-};
-
-/*********************************************************************/
-/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Tests data lines for shorts and opens by forcing adjacent data  */
-/*   to opposite states. Because the data lines could be routed in   */
-/*   an arbitrary manner the must ensure test patterns ensure that   */
-/*   every case is tested. By using the following series of binary   */
-/*   patterns every combination of adjacent bits is test regardless  */
-/*   of routing.						     */
-/*								     */
-/*     ...101010101010101010101010				     */
-/*     ...110011001100110011001100				     */
-/*     ...111100001111000011110000				     */
-/*     ...111111110000000011111111				     */
-/*								     */
-/*   Carrying this out, gives us six hex patterns as follows:	     */
-/*								     */
-/*     0xaaaaaaaaaaaaaaaa					     */
-/*     0xcccccccccccccccc					     */
-/*     0xf0f0f0f0f0f0f0f0					     */
-/*     0xff00ff00ff00ff00					     */
-/*     0xffff0000ffff0000					     */
-/*     0xffffffff00000000					     */
-/*								     */
-/*   The number test patterns will always be given by:		     */
-/*								     */
-/*   log(base 2)(number data bits) = log2 (64) = 6		     */
-/*								     */
-/*   To test for short and opens to other signals on our boards. we  */
-/*   simply							     */
-/*   test with the 1's complemnt of the paterns as well.	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern				     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*  Assumes only one one SDRAM bank				     */
-/*								     */
-/*********************************************************************/
-int mem_test_data (void)
-{
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
-	unsigned long long temp64 = 0;
-	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
-	int i;
-	unsigned int hi, lo;
-
-	for (i = 0; i < num_patterns; i++) {
-		move64 (&(pattern[i]), pmem);
-		move64 (pmem, &temp64);
-
-		/* hi = (temp64>>32) & 0xffffffff;          */
-		/* lo = temp64 & 0xffffffff;                */
-		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
-		hi = (pattern[i] >> 32) & 0xffffffff;
-		lo = pattern[i] & 0xffffffff;
-		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
-
-		if (temp64 != pattern[i]) {
-			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
-				hi, lo);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_DATA */
-
-#if defined (CFG_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME:  mem_test_address() -	test address lines		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function performs a test to verify that each word im	     */
-/*   memory is uniquly addressable. The test sequence is as follows: */
-/*								     */
-/*   1) write the address of each word to each word.		     */
-/*   2) verify that each location equals its address		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_address (void)
-{
-	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
-	unsigned int i;
-
-	/* write address to each location */
-	for (i = 0; i < size; i++) {
-		pmem[i] = i;
-	}
-
-	/* verify each loaction */
-	for (i = 0; i < size; i++) {
-		if (pmem[i] != i) {
-			printf ("\n   Address Test Failed at 0x%x", i);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_ADDRESS */
-
-#if defined (CFG_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME:   mem_march() -  memory march				     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Marches up through memory. At each location verifies rmask if   */
-/*   read = 1. At each location write wmask if	write = 1. Displays  */
-/*   failing address and pattern.				     */
-/*								     */
-/* INPUTS:							     */
-/*   volatile unsigned long long * base - start address of test	     */
-/*   unsigned int size - number of dwords(64-bit) to test	     */
-/*   unsigned long long rmask - read verify mask		     */
-/*   unsigned long long wmask - wrtie verify mask		     */
-/*   short read - verifies rmask if read = 1			     */
-/*   short write  - writes wmask if write = 1			     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
-	       unsigned int size,
-	       unsigned long long rmask,
-	       unsigned long long wmask, short read, short write)
-{
-	unsigned int i;
-	unsigned long long temp = 0;
-	unsigned int hitemp, lotemp, himask, lomask;
-
-	for (i = 0; i < size; i++) {
-		if (read != 0) {
-			/* temp = base[i]; */
-			move64 ((unsigned long long *) &(base[i]), &temp);
-			if (rmask != temp) {
-				hitemp = (temp >> 32) & 0xffffffff;
-				lotemp = temp & 0xffffffff;
-				himask = (rmask >> 32) & 0xffffffff;
-				lomask = rmask & 0xffffffff;
-
-				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
-				return 1;
-			}
-		}
-		if (write != 0) {
-			/*  base[i] = wmask; */
-			move64 (&wmask, (unsigned long long *) &(base[i]));
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME:   mem_test_walk() -  a simple walking ones test	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Performs a walking ones through entire physical memory. The     */
-/*   test uses as series of memory marches, mem_march(), to verify   */
-/*   and write the test patterns to memory. The test sequence is as  */
-/*   follows:							     */
-/*     1) march writing 0000...0001				     */
-/*     2) march verifying 0000...0001  , writing  0000...0010	     */
-/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
-/*	   the write mask equals 1000...0000			     */
-/*     4) march verifying 1000...0000				     */
-/*   The test fails if any of the memory marches return a failure.   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays which pass on the memory test is executing	     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_walk (void)
-{
-	unsigned long long mask;
-	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
-
-	unsigned int i;
-
-	mask = 0x01;
-
-	printf ("Initial Pass");
-	mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-	printf ("		");
-	printf ("         ");
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
-	for (i = 0; i < 63; i++) {
-		printf ("Pass %2d", i + 2);
-		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
-			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
-			return 1;
-		}
-		mask = mask << 1;
-		printf ("\b\b\b\b\b\b\b");
-	}
-
-	printf ("Last Pass");
-	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
-		/* printf("mask: 0x%x", mask); */
-		return 1;
-	}
-	printf ("\b\b\b\b\b\b\b\b\b");
-	printf ("	     ");
-	printf ("\b\b\b\b\b\b\b\b\b");
-
-	return 0;
-}
-
-/*********************************************************************/
-/* NAME:    testdram() -  calls any enabled memory tests	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Runs memory tests if the environment test variables are set to  */
-/*   'y'.							     */
-/*								     */
-/* INPUTS:							     */
-/*   testdramdata    - If set to 'y', data test is run.		     */
-/*   testdramaddress - If set to 'y', address test is run.	     */
-/*   testdramwalk    - If set to 'y', walking ones test is run	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int testdram (void)
-{
-	char *s;
-	int rundata, runaddress, runwalk;
-
-	s = getenv ("testdramdata");
-	rundata = (s && (*s == 'y')) ? 1 : 0;
-	s = getenv ("testdramaddress");
-	runaddress = (s && (*s == 'y')) ? 1 : 0;
-	s = getenv ("testdramwalk");
-	runwalk = (s && (*s == 'y')) ? 1 : 0;
-
-/*    rundata = 1; */
-/*    runaddress = 0; */
-/*    runwalk = 0; */
-
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
-	}
-#ifdef CFG_DRAM_TEST_DATA
-	if (rundata == 1) {
-		printf ("Test DATA ...  ");
-		if (mem_test_data () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	if (runaddress == 1) {
-		printf ("Test ADDRESS ...  ");
-		if (mem_test_address () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	if (runwalk == 1) {
-		printf ("Test WALKING ONEs ...  ");
-		if (mem_test_walk () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("passed\n");
-	}
-	return 0;
-
-}
-#endif /* CFG_DRAM_TEST */
-
-/* ronen - the below functions are used by the bootm function           */
-/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
-/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
-/*    the kernel data areas.                                            */
-/*  - we diable and invalidate the icache and dcache.                   */
-void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
-							new_loc |
-							(INTERNAL_SPACE_DECODE)))))
-	       != temp);
-
-}
-
-void board_prebootm_init ()
-{
-
-/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
-		GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
-
-/* Stop GigE Rx DMA engines */
-	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
-	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00);
-	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
-
-/* Relocate MV64460 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
-
-	icache_disable ();
-	invalidate_l1_instruction_cache ();
-	flush_data_cache ();
-	dcache_disable ();
-}
diff --git a/board/Marvell/db64460/eth.h b/board/Marvell/db64460/eth.h
deleted file mode 100644
index 6c3b2e0ba0..0000000000
--- a/board/Marvell/db64460/eth.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __EVB64460_ETH_H__
-#define __EVB64460_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-
-int db64460_eth0_poll(void);
-int db64460_eth0_transmit(unsigned int s, volatile char *p);
-void db64460_eth0_disable(void);
-bool network_start(bd_t *bis);
-
-#endif /* __EVB64460_ETH_H__ */
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
deleted file mode 100644
index 0cd68e2405..0000000000
--- a/board/Marvell/db64460/mpsc.c
+++ /dev/null
@@ -1,1000 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-/*
- * mpsc.c - driver for console over the MPSC.
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <asm/cache.h>
-
-#include <malloc.h>
-#include "mpsc.h"
-
-#include "mv_regs.h"
-
-#include "../include/memory.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Define this if you wish to use the MPSC as a register based UART.
- * This will force the serial port to not use the SDMA engine at all.
- */
-#undef CONFIG_MPSC_DEBUG_PORT
-
-
-int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
-char (*mpsc_getchar) (void) = mpsc_getchar_debug;
-int (*mpsc_test_char) (void) = mpsc_test_char_debug;
-
-
-static volatile unsigned int *rx_desc_base = NULL;
-static unsigned int rx_desc_index = 0;
-static volatile unsigned int *tx_desc_base = NULL;
-static unsigned int tx_desc_index = 0;
-
-/* local function declarations */
-static int galmpsc_connect (int channel, int connect);
-static int galmpsc_route_rx_clock (int channel, int brg);
-static int galmpsc_route_tx_clock (int channel, int brg);
-static int galmpsc_write_config_regs (int mpsc, int mode);
-static int galmpsc_config_channel_regs (int mpsc);
-static int galmpsc_set_char_length (int mpsc, int value);
-static int galmpsc_set_stop_bit_length (int mpsc, int value);
-static int galmpsc_set_parity (int mpsc, int value);
-static int galmpsc_enter_hunt (int mpsc);
-static int galmpsc_set_brkcnt (int mpsc, int value);
-static int galmpsc_set_tcschar (int mpsc, int value);
-static int galmpsc_set_snoop (int mpsc, int value);
-static int galmpsc_shutdown (int mpsc);
-
-static int galsdma_set_RFT (int channel);
-static int galsdma_set_SFM (int channel);
-static int galsdma_set_rxle (int channel);
-static int galsdma_set_txle (int channel);
-static int galsdma_set_burstsize (int channel, unsigned int value);
-static int galsdma_set_RC (int channel, unsigned int value);
-
-static int galbrg_set_CDV (int channel, int value);
-static int galbrg_enable (int channel);
-static int galbrg_disable (int channel);
-static int galbrg_set_clksrc (int channel, int value);
-static int galbrg_set_CUV (int channel, int value);
-
-static void galsdma_enable_rx (void);
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress,
-				  unsigned int size);
-
-
-#define SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-#define FLUSH_DCACHE(a,b)
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-static void mpsc_debug_init (void)
-{
-
-	volatile unsigned int temp;
-
-	/* Clear the CFR  (CHR4) */
-	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
-	temp &= 0xffffff00;
-	temp |= BIT29;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
-	temp |= (BIT12 | BIT15);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set int mask */
-	temp = GTREGREAD (GALMPSC_0_INT_MASK);
-	temp |= BIT6;
-	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
-}
-#endif
-
-char mpsc_getchar_debug (void)
-{
-	volatile int temp;
-	volatile unsigned int cause;
-
-	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	while ((cause & BIT6) == 0) {
-		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	}
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
-			  (CHANNEL * GALMPSC_REG_GAP));
-	/* By writing 1's to the set bits, the register is cleared */
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
-	return (temp >> 16) & 0xff;
-}
-
-/* special function for running out of flash.  doesn't modify any
- * global variables [josh] */
-int mpsc_putchar_early (char ch)
-{
-	int mpsc = CHANNEL;
-	int temp =
-		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	galmpsc_set_tcschar (mpsc, ch);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
-		      temp | 0x200);
-
-#define MAGIC_FACTOR	(10*1000000)
-
-	udelay (MAGIC_FACTOR / gd->baudrate);
-	return 0;
-}
-
-/* This is used after relocation, see serial.c and mpsc_init2 */
-static int mpsc_putchar_sdma (char ch)
-{
-	volatile unsigned int *p;
-	unsigned int temp;
-
-
-	/* align the descriptor */
-	p = tx_desc_base;
-	memset ((void *) p, 0, 8 * sizeof (unsigned int));
-
-	/* fill one 64 bit buffer */
-	/* word swap, pad with 0 */
-	p[4] = 0;		/* x */
-	p[5] = (unsigned int) ch;	/* x */
-
-	/* CHANGED completely according to GT64260A dox - NTL */
-	p[0] = 0x00010001;	/* 0 */
-	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
-	p[2] = 0;		/* 8 */
-	p[3] = (unsigned int) &p[4];	/* c */
-
-
-	FLUSH_DCACHE (&p[0], &p[8]);
-
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= (TX_DEMAND | TX_STOP);
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	while (p[1] & DESC_OWNER_BIT) {
-		udelay (100);
-		INVALIDATE_DCACHE (&p[1], &p[2]);
-	}
-	return 0;
-}
-
-char mpsc_getchar_sdma (void)
-{
-	static unsigned int done = 0;
-	volatile char ch;
-	unsigned int len = 0, idx = 0, temp;
-
-	volatile unsigned int *p;
-
-
-	do {
-		p = &rx_desc_base[rx_desc_index * 8];
-
-		INVALIDATE_DCACHE (&p[0], &p[1]);
-		/* Wait for character */
-		while (p[1] & DESC_OWNER_BIT) {
-			udelay (100);
-			INVALIDATE_DCACHE (&p[0], &p[1]);
-		}
-
-		/* Handle error case */
-		if (p[1] & (1 << 15)) {
-			printf ("oops, error: %08x\n", p[1]);
-
-			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
-					  (CHANNEL * GALMPSC_REG_GAP));
-			temp |= (1 << 23);
-			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
-				      (CHANNEL * GALMPSC_REG_GAP), temp);
-
-			/* Can't poll on abort bit, so we just wait. */
-			udelay (100);
-
-			galsdma_enable_rx ();
-		}
-
-		/* Number of bytes left in this descriptor */
-		len = p[0] & 0xffff;
-
-		if (len) {
-			/* Where to look */
-			idx = 5;
-			if (done > 3)
-				idx = 4;
-			if (done > 7)
-				idx = 7;
-			if (done > 11)
-				idx = 6;
-
-			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
-			ch = p[idx] & 0xff;
-			done++;
-		}
-
-		if (done < len) {
-			/* this descriptor has more bytes still
-			 * shift down the char we just read, and leave the
-			 * buffer in place for the next time around
-			 */
-			p[idx] = p[idx] >> 8;
-			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
-		}
-
-		if (done == len) {
-			/* nothing left in this descriptor.
-			 * go to next one
-			 */
-			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-			p[0] = 0x00100000;
-			FLUSH_DCACHE (&p[0], &p[1]);
-			/* Next descriptor */
-			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
-			done = 0;
-		}
-	} while (len == 0);	/* galileo bug.. len might be zero */
-
-	return ch;
-}
-
-
-int mpsc_test_char_debug (void)
-{
-	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
-		return 0;
-	else {
-		return 1;
-	}
-}
-
-
-int mpsc_test_char_sdma (void)
-{
-	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	if (p[1] & DESC_OWNER_BIT)
-		return 0;
-	else
-		return 1;
-}
-
-int mpsc_init (int baud)
-{
-	/* BRG CONFIG */
-	galbrg_set_baudrate (CHANNEL, baud);
-	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
-	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
-	galbrg_enable (CHANNEL);	/* Enable BRG */
-
-	/* Set up clock routing */
-	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
-
-	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
-	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
-
-	/* reset MPSC state */
-	galmpsc_shutdown (CHANNEL);
-
-	/* SDMA CONFIG */
-	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
-	galsdma_set_txle (CHANNEL);
-	galsdma_set_rxle (CHANNEL);
-	galsdma_set_RC (CHANNEL, 0xf);
-	galsdma_set_SFM (CHANNEL);
-	galsdma_set_RFT (CHANNEL);
-
-	/* MPSC CONFIG */
-	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
-	galmpsc_config_channel_regs (CHANNEL);
-	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
-	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
-	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-	mpsc_debug_init ();
-#endif
-
-	/* COMM_MPSC CONFIG */
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
-#else
-	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
-#endif
-
-	return 0;
-}
-
-
-void mpsc_sdma_init (void)
-{
-/* Setup SDMA channel0 SDMA_CONFIG_REG*/
-	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
-
-/*  Enable MPSC-Window0 for DRAM Bank0   */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT,
-				   MV64460_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_0_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK0)) != true)
-		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window1    */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT,
-				   MV64460_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_1_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window2 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT,
-				   MV64460_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_2_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window3 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT,
-				   MV64460_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_3_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
-			__FUNCTION__);
-
-/*  Setup MPSC0 access mode Window0 full access */
-	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
-			 (MV64460_SDMA_WIN_ACCESS_FULL <<
-			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/*  Setup MPSC1 access mode Window1 full access */
-	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
-			 (MV64460_SDMA_WIN_ACCESS_FULL <<
-			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/* Setup MPSC internal address space base address 	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
-
-/* no high address remap*/
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
-
-/* clear interrupt cause register for MPSC (fault register)*/
-	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
-}
-
-
-void mpsc_init2 (void)
-{
-	int i;
-
-#ifndef CONFIG_MPSC_DEBUG_PORT
-	mpsc_putchar = mpsc_putchar_sdma;
-	mpsc_getchar = mpsc_getchar_sdma;
-	mpsc_test_char = mpsc_test_char_sdma;
-#endif
-	/* RX descriptors */
-	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	rx_desc_base = (unsigned int *)
-		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
-
-	rx_desc_index = 0;
-
-	memset ((void *) rx_desc_base, 0,
-		(RX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < RX_DESC; i++) {
-		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
-		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
-		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
-		rx_desc_base[i * 8] = 0x00100000;
-	}
-	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
-
-	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &rx_desc_base[0]);
-
-	/* TX descriptors */
-	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	tx_desc_base = (unsigned int *)
-		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
-
-	tx_desc_index = -1;
-
-	memset ((void *) tx_desc_base, 0,
-		(TX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < TX_DESC; i++) {
-		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 3] =
-			(unsigned int) &tx_desc_base[i * 8 + 4];
-		tx_desc_base[i * 8 + 2] =
-			(unsigned int) &tx_desc_base[(i + 1) * 8];
-		tx_desc_base[i * 8 + 1] =
-			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-
-		/* set sbytecnt and shadow byte cnt to 1 */
-		tx_desc_base[i * 8] = 0x00010001;
-	}
-	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
-
-	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
-
-	udelay (100);
-
-	galsdma_enable_rx ();
-
-	return;
-}
-
-int galbrg_set_baudrate (int channel, int rate)
-{
-	int clock;
-
-	galbrg_disable (channel);	/*ok */
-
-#ifdef ZUMA_NTL
-	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#endif
-
-	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
-
-	galbrg_enable (channel);
-
-	gd->baudrate = rate;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-/* Below are all the private functions that no one else needs */
-
-static int galbrg_set_CDV (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= (value & 0x0000FFFF);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_enable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp |= 0x00010000;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_disable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFEFFFF;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_set_clksrc (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
-	temp |= (value << 18);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-	return 0;
-}
-
-static int galbrg_set_CUV (int channel, int value)
-{
-	/* set CountUpValue */
-	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
-
-	return 0;
-}
-
-
-static int galsdma_set_RFT (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000001;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_SFM (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000002;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_rxle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000040;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_txle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000080;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_RC (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= ~0x0000003c;
-	temp |= (value << 2);
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_burstsize (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= 0xFFFFCFFF;
-	switch (value) {
-	case 8:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x3 << 12)));
-		break;
-
-	case 4:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x2 << 12)));
-		break;
-
-	case 2:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x1 << 12)));
-		break;
-
-	case 1:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x0 << 12)));
-		break;
-
-	default:
-		return -1;
-		break;
-	}
-
-	return 0;
-}
-
-static int galmpsc_connect (int channel, int connect)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
-
-	if ((channel == 0) && connect)
-		temp &= ~0x00000007;
-	else if ((channel == 1) && connect)
-		temp &= ~(0x00000007 << 6);
-	else if ((channel == 0) && !connect)
-		temp |= 0x00000007;
-	else
-		temp |= (0x00000007 << 6);
-
-	/* Just in case... */
-	temp &= 0x3fffffff;
-
-	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_rx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_tx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_write_config_regs (int mpsc, int mode)
-{
-	if (mode == GALMPSC_UART) {
-		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
-		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
-			      0x000004c4);
-
-		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
-		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
-			      0x024003f8);
-		/*        22 2222 1111 */
-		/*        54 3210 9876 */
-		/* 0000 0010 0000 0000 */
-		/*       1 */
-		/*       098 7654 3210 */
-		/* 0000 0011 1111 1000 */
-	} else
-		return -1;
-
-	return 0;
-}
-
-static int galmpsc_config_channel_regs (int mpsc)
-{
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
-
-	galmpsc_set_brkcnt (mpsc, 0x3);
-	galmpsc_set_tcschar (mpsc, 0xab);
-
-	return 0;
-}
-
-static int galmpsc_set_brkcnt (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0x0000FFFF;
-	temp |= (value << 16);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_tcschar (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= value;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_char_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFCFFF;
-	temp |= (value << 12);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_stop_bit_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFBFFF;
-	temp |= (value << 14);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_parity (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	if (value != -1) {
-		temp &= 0xFFF3FFF3;
-		temp |= ((value << 18) | (value << 2));
-		temp |= ((value << 17) | (value << 1));
-	} else {
-		temp &= 0xFFF1FFF1;
-	}
-
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_enter_hunt (int mpsc)
-{
-	int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= 0x80000000;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
-	       MPSC_ENTER_HUNT) {
-		udelay (1);
-	}
-	return 0;
-}
-
-
-static int galmpsc_shutdown (int mpsc)
-{
-	unsigned int temp;
-
-	/* cause RX abort (clears RX) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
-	temp &= ~MPSC_ENTER_HUNT;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
-
-	/* shut down the MPSC */
-	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
-	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
-
-	udelay (100);
-
-	/* shut down the sdma engines. */
-	/* reset config to default */
-	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
-
-	udelay (100);
-
-	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
-
-	udelay (100);
-
-	return 0;
-}
-
-static void galsdma_enable_rx (void)
-{
-	int temp;
-
-	/* Enable RX processing */
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= RX_ENABLE;
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	galmpsc_enter_hunt (CHANNEL);
-}
-
-static int galmpsc_set_snoop (int mpsc, int value)
-{
-	int reg =
-		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
-		MPSC_0_ADDRESS_CONTROL_LOW;
-	int temp = GTREGREAD (reg);
-
-	if (value)
-		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
-	else
-		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
-	GT_REG_WRITE (reg, temp);
-	return 0;
-}
-
-/*******************************************************************************
-* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map.
-*
-* DESCRIPTION:
-*       the MV64460 SDMA has its own address decoding map that is de-coupled
-*       from the CPU interface address decoding windows. The SDMA channels
-*       share four address windows. Each region can be individually configured
-*       by this function by associating it to a target interface and setting
-*       base and size values.
-*
-*      NOTE!!!
-*       The size must be in 64Kbyte granularity.
-*       The base address must be aligned to the size.
-*       The size must be a series of 1s followed by a series of zeros
-*
-* OUTPUT:
-*       None.
-*
-* RETURN:
-*       True for success, false otherwise.
-*
-*******************************************************************************/
-
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress, unsigned int size)
-{
-	unsigned int temp;
-
-	if (size == 0) {
-		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-		return true;
-	}
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return false;
-	}
-	if (size < 0x10000) {
-		return false;
-	}
-
-	/* Align size and base to 64K */
-	baseAddress &= 0xffff0000;
-	size &= 0xffff0000;
-	temp = size >> 16;
-
-	/* Checking that the size is a sequence of '1' followed by a
-	   sequence of '0' starting from LSB to MSB. */
-	while ((temp > 0) && (temp & 0x1)) {
-		temp = temp >> 1;
-	}
-
-	if (temp != 0) {
-		GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-	} else {
-		/* An invalid size was specified */
-		return false;
-	}
-	return true;
-}
diff --git a/board/Marvell/db64460/mpsc.h b/board/Marvell/db64460/mpsc.h
deleted file mode 100644
index 3cc0c0f7a5..0000000000
--- a/board/Marvell/db64460/mpsc.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include "../include/mv_gen_reg.h"
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_sdma_init(void);
-void mpsc_init2(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-char mpsc_getchar_debug(void);
-int mpsc_test_char_debug(void);
-
-int mpsc_test_char_sdma(void);
-
-extern int (*mpsc_putchar)(char ch);
-extern char (*mpsc_getchar)(void);
-extern int (*mpsc_test_char)(void);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC     5
-#define RX_DESC     20
-
-#define DESC_FIRST  0x00010000
-#define DESC_LAST   0x00020000
-#define DESC_OWNER_BIT  0x80000000
-
-#define TX_DEMAND   0x00800000
-#define TX_STOP     0x00010000
-#define RX_ENABLE   0x00000080
-
-#define SDMA_RX_ABORT 		  (1 << 15)
-#define SDMA_TX_ABORT 		  (1 << 31)
-#define MPSC_TX_ABORT 		  (1 << 7)
-#define MPSC_RX_ABORT             (1 << 23)
-#define MPSC_ENTER_HUNT           (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT            0x1
-#define GALMPSC_DISCONNECT         0x0
-
-#define GALMPSC_UART               0x1
-
-#define GALMPSC_STOP_BITS_1        0x0
-#define GALMPSC_STOP_BITS_2        0x1
-#define GALMPSC_CHAR_LENGTH_8      0x3
-#define GALMPSC_CHAR_LENGTH_7      0x2
-
-#define GALMPSC_PARITY_ODD         0x0
-#define GALMPSC_PARITY_EVEN        0x2
-#define GALMPSC_PARITY_MARK        0x3
-#define GALMPSC_PARITY_SPACE       0x1
-#define GALMPSC_PARITY_NONE        -1
-
-#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
-#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
-#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
-#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
-
-#define GALMPSC_REG_GAP            0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
-#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
-#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
-#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
-#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
-#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
-#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
-#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
-#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST     (1 << 16)
-#define GALSDMA_COMMAND_LAST      (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO      (1 << 30)
-#define GALSDMA_COMMAND_OWNER     (1 << 31)
-
-#define GALSDMA_RX                 0
-#define GALSDMA_TX                 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
-#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
-#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
-#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
-#define GALSDMA_REG_DIFF           0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
-#define GALMPSC_0_INT_CAUSE        0xb804
-#define GALMPSC_0_INT_MASK         0xb884
-
-#define GALSDMA_MODE_UART          0
-#define GALSDMA_MODE_BISYNC        1
-#define GALSDMA_MODE_HDLC          2
-#define GALSDMA_MODE_TRANSPARENT   3
-
-#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
-#define GALBRG_REG_GAP             0x0008
-#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
-
-#endif /* __MPSC_H__ */
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
deleted file mode 100644
index 786820c3c7..0000000000
--- a/board/Marvell/db64460/mv_eth.c
+++ /dev/null
@@ -1,2779 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.c - header file for the polled mode GT ethernet driver
- */
-#include <common.h>
-#include <net.h>
-#include <malloc.h>
-
-#include "mv_eth.h"
-
-/* enable Debug outputs */
-
-#undef DEBUG_MV_ETH
-
-#ifdef DEBUG_MV_ETH
-#define DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-#undef MV64460_CHECKSUM_OFFLOAD
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-/* Definition for configuring driver */
-/* #define UPDATE_STATS_BY_SOFTWARE */
-#undef MV64460_RX_QUEUE_FILL_ON_TASK
-
-
-/* Constants */
-#define MAGIC_ETH_RUNNING		8031971
-#define MV64460_INTERNAL_SRAM_SIZE                      _256K
-#define EXTRA_BYTES 32
-#define WRAP       ETH_HLEN + 2 + 4 + 16
-#define BUFFER_MTU dev->mtu + WRAP
-#define INT_CAUSE_UNMASK_ALL		0x0007ffff
-#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
-#ifdef MV64460_RX_FILL_ON_TASK
-#define INT_CAUSE_MASK_ALL		0x00000000
-#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
-#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
-#endif
-
-/* Read/Write to/from MV64460 internal registers */
-#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
-#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
-#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
-#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
-
-/* Static function declarations */
-static int mv64460_eth_real_open (struct eth_device *eth);
-static int mv64460_eth_real_stop (struct eth_device *eth);
-static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
-						       *dev);
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
-static void mv64460_eth_update_stat (struct eth_device *dev);
-bool db64460_eth_start (struct eth_device *eth);
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset);
-int mv64460_eth_receive (struct eth_device *dev);
-
-int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-static void mv64460_eth_print_stat (struct eth_device *dev);
-#endif
-/* Processes a received packet */
-extern void NetReceive (volatile uchar *, int);
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-/*************************************************
- *Helper functions - used inside the driver only *
- *************************************************/
-#ifdef DEBUG_MV_ETH
-void print_globals (struct eth_device *dev)
-{
-	printf ("Ethernet PRINT_Globals-Debug function\n");
-	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
-		(unsigned int) dev->priv);
-	printf ("Base Address for mv64460_eth_priv:	%08x\n",
-		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
-				 port_private));
-
-	printf ("GT Internal Base Address:	%08x\n",
-		INTERNAL_REG_BASE_ADDR);
-	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
-	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
-	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_rx_buffer_base[0],
-		(MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
-	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_tx_buffer_base[0],
-		(MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
-}
-#endif
-
-#define my_cpu_to_le32(x) my_le32_to_cpu((x))
-
-unsigned long my_le32_to_cpu (unsigned long x)
-{
-	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) << 8) |
-		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
-}
-
-
-/**********************************************************************
- * mv64460_eth_print_phy_status
- *
- * Prints gigabit ethenret phy status
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64460_eth_print_phy_status (struct eth_device *dev)
-{
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	unsigned int port_status, phy_reg_data;
-
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		printf ("Ethernet port changed link status to DOWN\n");
-	} else {
-		port_status =
-			MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
-		printf ("Ethernet status port %d: Link up", port_num);
-		printf (", %s",
-			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
-		if (port_status & BIT4)
-			printf (", Speed 1 Gbps");
-		else
-			printf (", %s",
-				(port_status & BIT5) ? "Speed 100 Mbps" :
-				"Speed 10 Mbps");
-		printf ("\n");
-	}
-}
-
-/**********************************************************************
- * u-boot entry functions for mv64460_eth
- *
- **********************************************************************/
-int db64460_eth_probe (struct eth_device *dev)
-{
-	return ((int) db64460_eth_start (dev));
-}
-
-int db64460_eth_poll (struct eth_device *dev)
-{
-	return mv64460_eth_receive (dev);
-}
-
-int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
-			  int length)
-{
-	mv64460_eth_xmit (dev, packet, length);
-	return 0;
-}
-
-void db64460_eth_disable (struct eth_device *dev)
-{
-	mv64460_eth_stop (dev);
-}
-
-
-void mv6446x_eth_initialize (bd_t * bis)
-{
-	struct eth_device *dev;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	int devnum, x, temp;
-	char *s, *e, buf[64];
-
-	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
-		dev = calloc (sizeof (*dev), 1);
-		if (!dev) {
-			printf ("%s: mv_enet%d allocation failure, %s\n",
-				__FUNCTION__, devnum, "eth_device structure");
-			return;
-		}
-
-		/* must be less than NAMESIZE (16) */
-		sprintf (dev->name, "mv_enet%d", devnum);
-
-#ifdef DEBUG
-		printf ("Initializing %s\n", dev->name);
-#endif
-
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-		/* ronen - set the MAC addr in the HW */
-		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
-
-		dev->init = (void *) db64460_eth_probe;
-		dev->halt = (void *) ethernet_phy_reset;
-		dev->send = (void *) db64460_eth_transmit;
-		dev->recv = (void *) db64460_eth_poll;
-
-		ethernet_private = calloc (sizeof (*ethernet_private), 1);
-		dev->priv = (void *)ethernet_private;
-		if (!ethernet_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Private Device Structure");
-			free (dev);
-			return;
-		}
-		/* start with an zeroed ETH_PORT_INFO */
-		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
-		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-		/* set pointer to memory for stats data structure etc... */
-		port_private = calloc (sizeof (*ethernet_private), 1);
-		ethernet_private->port_private = (void *)port_private;
-		if (!port_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Port Private Device Structure");
-
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-
-		port_private->stats =
-			calloc (sizeof (struct net_device_stats), 1);
-		if (!port_private->stats) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Net stat Structure");
-
-			free (port_private);
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-		memset (ethernet_private->port_private, 0,
-			sizeof (struct mv64460_eth_priv));
-		switch (devnum) {
-		case 0:
-			ethernet_private->port_num = ETH_0;
-			break;
-		case 1:
-			ethernet_private->port_num = ETH_1;
-			break;
-		case 2:
-			ethernet_private->port_num = ETH_2;
-			break;
-		default:
-			printf ("Invalid device number %d\n", devnum);
-			break;
-		};
-
-		port_private->port_num = devnum;
-		/*
-		 * Read MIB counter on the GT in order to reset them,
-		 * then zero all the stats fields in memory
-		 */
-		mv64460_eth_update_stat (dev);
-		memset (port_private->stats, 0,
-			sizeof (struct net_device_stats));
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-
-		DP (printf ("Allocating descriptor and buffer rings\n"));
-
-		ethernet_private->p_rx_desc_area_base[0] =
-			(ETH_RX_DESC *) memalign (16,
-						  RX_DESC_ALIGNED_SIZE *
-						  MV64460_RX_QUEUE_SIZE + 1);
-		ethernet_private->p_tx_desc_area_base[0] =
-			(ETH_TX_DESC *) memalign (16,
-						  TX_DESC_ALIGNED_SIZE *
-						  MV64460_TX_QUEUE_SIZE + 1);
-
-		ethernet_private->p_rx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64460_RX_QUEUE_SIZE *
-					   MV64460_TX_BUFFER_SIZE + 1);
-		ethernet_private->p_tx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64460_RX_QUEUE_SIZE *
-					   MV64460_TX_BUFFER_SIZE + 1);
-
-#ifdef DEBUG_MV_ETH
-		/* DEBUG OUTPUT prints adresses of globals */
-		print_globals (dev);
-#endif
-		eth_register (dev);
-
-	}
-	DP (printf ("%s: exit\n", __FUNCTION__));
-
-}
-
-/**********************************************************************
- * mv64460_eth_open
- *
- * This function is called when openning the network device. The function
- * should initialize all the hardware, initialize cyclic Rx/Tx
- * descriptors chain and buffers and allocate an IRQ to the network
- * device.
- *
- * Input : a pointer to the network device structure
- * / / ronen - changed the output to match  net/eth.c needs
- * Output : nonzero of success , zero if fails.
- * under construction
- **********************************************************************/
-
-int mv64460_eth_open (struct eth_device *dev)
-{
-	return (mv64460_eth_real_open (dev));
-}
-
-/* Helper function for mv64460_eth_open */
-static int mv64460_eth_real_open (struct eth_device *dev)
-{
-
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	u32 port_status, phy_reg_data;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	/* ronen - when we update the MAC env params we only update dev->enetaddr
-	   see ./net/eth.c eth_set_enetaddr() */
-	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Clear the ethernet port interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-
-	/* Unmask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL);
-
-	/* Unmask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL_EXT);
-
-	/* Set phy address of the port */
-	ethernet_private->port_phy_addr = 0x8 + port_num;
-
-	/* Activate the DMA channels etc */
-	eth_port_init (ethernet_private);
-
-
-	/* "Allocate" setup TX rings */
-
-	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
-		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
-		ethernet_private->tx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
-			0, ethernet_private->tx_desc_area_size[queue]);
-
-		/* initialize tx desc ring with low level driver */
-		if (ether_init_tx_desc_ring
-		    (ethernet_private, ETH_Q0,
-		     port_private->tx_ring_size[queue],
-		     MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		     (unsigned int) ethernet_private->
-		     p_tx_desc_area_base[queue],
-		     (unsigned int) ethernet_private->
-		     p_tx_buffer_base[queue]) == false)
-			printf ("### Error initializing TX Ring\n");
-	}
-
-	/* "Allocate" setup RX rings */
-	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		/* Meantime RX Ring are fixed - but must be configurable by user */
-		port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
-		size = (port_private->rx_ring_size[queue] *
-			RX_DESC_ALIGNED_SIZE);
-		ethernet_private->rx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
-			0, ethernet_private->rx_desc_area_size[queue]);
-		if ((ether_init_rx_desc_ring
-		     (ethernet_private, ETH_Q0,
-		      port_private->rx_ring_size[queue],
-		      MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		      (unsigned int) ethernet_private->
-		      p_rx_desc_area_base[queue],
-		      (unsigned int) ethernet_private->
-		      p_rx_buffer_base[queue])) == false)
-			printf ("### Error initializing RX Ring\n");
-	}
-
-	eth_port_start (ethernet_private);
-
-	/* Set maximum receive buffer to 9700 bytes */
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
-		      (0x5 << 17) |
-		      (MV_REG_READ
-		       (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
-		       & 0xfff1ffff));
-
-	/*
-	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
-	 * disable the leaky bucket mechanism .
-	 */
-
-	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
-	port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		/* Reset PHY */
-		if ((ethernet_phy_reset (port_num)) != true) {
-			printf ("$$ Warnning: No link on port %d \n",
-				port_num);
-			return 0;
-		} else {
-			eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-			if (!(phy_reg_data & 0x20)) {
-				printf ("### Error: Phy is not active\n");
-				return 0;
-			}
-		}
-	} else {
-		mv64460_eth_print_phy_status (dev);
-	}
-	port_private->eth_running = MAGIC_ETH_RUNNING;
-	return 1;
-}
-
-
-static int mv64460_eth_free_tx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop Tx Queues */
-	MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free TX rings */
-	DP (printf ("Clearing previously allocated TX queues... "));
-	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
-		/* Free on TX rings */
-		for (p_tx_curr_desc =
-		     ethernet_private->p_tx_desc_area_base[queue];
-		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
-		      ethernet_private->p_tx_desc_area_base[queue] +
-		      ethernet_private->tx_desc_area_size[queue]);
-		     p_tx_curr_desc =
-		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
-				      TX_DESC_ALIGNED_SIZE)) {
-			/* this is inside for loop */
-			if (p_tx_curr_desc->return_info != 0) {
-				p_tx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-static int mv64460_eth_free_rx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free RX rings */
-	DP (printf ("Clearing previously allocated RX queues... "));
-	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
-		/* Free preallocated skb's on RX rings */
-		for (p_rx_curr_desc =
-		     ethernet_private->p_rx_desc_area_base[queue];
-		     (((unsigned int) p_rx_curr_desc <
-		       ((unsigned int) ethernet_private->
-			p_rx_desc_area_base[queue] +
-			ethernet_private->rx_desc_area_size[queue])));
-		     p_rx_curr_desc =
-		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
-				      RX_DESC_ALIGNED_SIZE)) {
-			if (p_rx_curr_desc->return_info != 0) {
-				p_rx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-/**********************************************************************
- * mv64460_eth_stop
- *
- * This function is used when closing the network device.
- * It updates the hardware,
- * release all memory that holds buffers and descriptors and release the IRQ.
- * Input : a pointer to the device structure
- * Output : zero if success , nonzero if fails
- *********************************************************************/
-
-int mv64460_eth_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Disable all gigE address decoder */
-	MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
-	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
-	mv64460_eth_real_stop (dev);
-
-	return 0;
-};
-
-/* Helper function for mv64460_eth_stop */
-
-static int mv64460_eth_real_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	mv64460_eth_free_tx_rings (dev);
-	mv64460_eth_free_rx_rings (dev);
-
-	eth_port_reset (ethernet_private->port_num);
-	/* Disable ethernet port interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-	/* Mask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
-	/* Mask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
-	MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
-			   BIT0 << port_num);
-	/* Print Network statistics */
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-	/*
-	 * Print statistics (only if ethernet is running),
-	 * then zero all the stats fields in memory
-	 */
-	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
-		port_private->eth_running = 0;
-		mv64460_eth_print_stat (dev);
-	}
-	memset (port_private->stats, 0, sizeof (struct net_device_stats));
-#endif
-	DP (printf ("\nEthernet stopped ... \n"));
-	return 0;
-}
-
-
-/**********************************************************************
- * mv64460_eth_start_xmit
- *
- * This function is queues a packet in the Tx descriptor for
- * required port.
- *
- * Input : skb - a pointer to socket buffer
- *         dev - a pointer to the required port
- *
- * Output : zero upon success
- **********************************************************************/
-
-int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
-		      int dataSize)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	ETH_FUNC_RET_STATUS status;
-	struct net_device_stats *stats;
-	ETH_FUNC_RET_STATUS release_result;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	stats = port_private->stats;
-
-	/* Update packet info data structure */
-	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
-	pkt_info.byte_cnt = dataSize;
-	pkt_info.buf_ptr = (unsigned int) dataPtr;
-	pkt_info.return_info = 0;
-
-	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
-	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
-		printf ("Error on transmitting packet ..");
-		if (status == ETH_QUEUE_FULL)
-			printf ("ETH Queue is full. \n");
-		if (status == ETH_QUEUE_LAST_RESOURCE)
-			printf ("ETH Queue: using last available resource. \n");
-		goto error;
-	}
-
-	/* Update statistics and start of transmittion time */
-	stats->tx_bytes += dataSize;
-	stats->tx_packets++;
-
-	/* Check if packet(s) is(are) transmitted correctly (release everything) */
-	do {
-		release_result =
-			eth_tx_return_desc (ethernet_private, ETH_Q0,
-					    &pkt_info);
-		switch (release_result) {
-		case ETH_OK:
-			DP (printf ("descriptor released\n"));
-			if (pkt_info.cmd_sts & BIT0) {
-				printf ("Error in TX\n");
-				stats->tx_errors++;
-
-			}
-			break;
-		case ETH_RETRY:
-			DP (printf ("transmission still in process\n"));
-			break;
-
-		case ETH_ERROR:
-			printf ("routine can not access Tx desc ring\n");
-			break;
-
-		case ETH_END_OF_JOB:
-			DP (printf ("the routine has nothing to release\n"));
-			break;
-		default:	/* should not happen */
-			break;
-		}
-	} while (release_result == ETH_OK);
-
-
-	return 0;		/* success */
-      error:
-	return 1;		/* Failed - higher layers will free the skb */
-}
-
-/**********************************************************************
- * mv64460_eth_receive
- *
- * This function is forward packets that are received from the port's
- * queues toward kernel core or FastRoute them to another interface.
- *
- * Input : dev - a pointer to the required interface
- *         max - maximum number to receive (0 means unlimted)
- *
- * Output : number of served packets
- **********************************************************************/
-
-int mv64460_eth_receive (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	struct net_device_stats *stats;
-
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
-		ETH_OK)) {
-
-#ifdef DEBUG_MV_ETH
-		if (pkt_info.byte_cnt != 0) {
-			printf ("%s: Received %d byte Packet @ 0x%x\n",
-				__FUNCTION__, pkt_info.byte_cnt,
-				pkt_info.buf_ptr);
-		}
-#endif
-		/* Update statistics. Note byte count includes 4 byte CRC count */
-		stats->rx_packets++;
-		stats->rx_bytes += pkt_info.byte_cnt;
-
-		/*
-		 * In case received a packet without first / last bits on OR the error
-		 * summary bit is on, the packets needs to be dropeed.
-		 */
-		if (((pkt_info.
-		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
-		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
-		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
-			stats->rx_dropped++;
-
-			printf ("Received packet spread on multiple descriptors\n");
-
-			/* Is this caused by an error ? */
-			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
-				stats->rx_errors++;
-			}
-
-			/* free these descriptors again without forwarding them to the higher layers */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-			/* /free these descriptors again */
-		} else {
-
-/* !!! call higher layer processing */
-#ifdef DEBUG_MV_ETH
-			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
-#endif
-			/* let the upper layer handle the packet */
-			NetReceive ((uchar *) pkt_info.buf_ptr,
-				    (int) pkt_info.byte_cnt);
-
-/* **************************************************************** */
-/* free descriptor  */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-			DP (printf
-			    ("RX: pkt_info.buf_ptr =	%x\n",
-			     pkt_info.buf_ptr));
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-
-/* **************************************************************** */
-
-		}
-	}
-	mv64460_eth_get_stats (dev);	/* update statistics */
-	return 1;
-}
-
-/**********************************************************************
- * mv64460_eth_get_stats
- *
- * Returns a pointer to the interface statistics.
- *
- * Input : dev - a pointer to the required interface
- *
- * Output : a pointer to the interface's statistics
- **********************************************************************/
-
-static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	mv64460_eth_update_stat (dev);
-
-	return port_private->stats;
-}
-
-
-/**********************************************************************
- * mv64460_eth_update_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64460_eth_update_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-	volatile unsigned int dummy;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	stats->rx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_RECEIVED);
-	stats->tx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_SENT);
-	stats->rx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
-	/*
-	 * Ideally this should be as follows -
-	 *
-	 *   stats->rx_bytes   += stats->rx_bytes +
-	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
-	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
-	 *
-	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
-	 * is just a dummy read for proper work of the GigE port
-	 */
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
-	stats->tx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
-	stats->rx_errors += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MAC_RECEIVE_ERROR);
-
-	/* Rx dropped is for received packet with CRC error */
-	stats->rx_dropped +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_BAD_CRC_EVENT);
-	stats->multicast += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
-	stats->collisions +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_COLLISION) +
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_LATE_COLLISION);
-	/* detailed rx errors */
-	stats->rx_length_errors +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_UNDERSIZE_RECEIVED)
-		+
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_OVERSIZE_RECEIVED);
-	/* detailed tx errors */
-}
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-/**********************************************************************
- * mv64460_eth_print_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64460_eth_print_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	printf ("\n### Network statistics: ###\n");
-	printf ("--------------------------\n");
-	printf (" Packets received:		%ld\n", stats->rx_packets);
-	printf (" Packets send:			%ld\n", stats->tx_packets);
-	printf (" Received bytes:		%ld\n", stats->rx_bytes);
-	printf (" Send bytes:			%ld\n", stats->tx_bytes);
-	if (stats->rx_errors != 0)
-		printf (" Rx Errors:			%ld\n",
-			stats->rx_errors);
-	if (stats->rx_dropped != 0)
-		printf (" Rx dropped (CRC Errors):	%ld\n",
-			stats->rx_dropped);
-	if (stats->multicast != 0)
-		printf (" Rx mulicast frames:		%ld\n",
-			stats->multicast);
-	if (stats->collisions != 0)
-		printf (" No. of collisions:		%ld\n",
-			stats->collisions);
-	if (stats->rx_length_errors != 0)
-		printf (" Rx length errors:		%ld\n",
-			stats->rx_length_errors);
-}
-#endif
-
-/**************************************************************************
- *network_start - Network Kick Off Routine UBoot
- *Inputs :
- *Outputs :
- **************************************************************************/
-
-bool db64460_eth_start (struct eth_device *dev)
-{
-	return (mv64460_eth_open (dev));	/* calls real open */
-}
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-/*
- * based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-/********************************************************************************
- * Marvell's Gigabit Ethernet controller low level driver
- *
- * DESCRIPTION:
- *       This file introduce low level API to Marvell's Gigabit Ethernet
- *		controller. This Gigabit Ethernet Controller driver API controls
- *		1) Operations (i.e. port init, start, reset etc').
- *		2) Data flow (i.e. port send, receive etc').
- *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
- *		struct.
- *		This struct includes user configuration information as well as
- *		driver internal data needed for its operations.
- *
- *		Supported Features:
- *		- This low level driver is OS independent. Allocating memory for
- *		  the descriptor rings and buffers are not within the scope of
- *		  this driver.
- *		- The user is free from Rx/Tx queue managing.
- *		- This low level driver introduce functionality API that enable
- *		  the to operate Marvell's Gigabit Ethernet Controller in a
- *		  convenient way.
- *		- Simple Gigabit Ethernet port operation API.
- *		- Simple Gigabit Ethernet port data flow API.
- *		- Data flow and operation API support per queue functionality.
- *		- Support cached descriptors for better performance.
- *		- Enable access to all four DRAM banks and internal SRAM memory
- *		  spaces.
- *		- PHY access and control API.
- *		- Port control register configuration API.
- *		- Full control over Unicast and Multicast MAC configurations.
- *
- *		Operation flow:
- *
- *		Initialization phase
- *		This phase complete the initialization of the ETH_PORT_INFO
- *		struct.
- *		User information regarding port configuration has to be set
- *		prior to calling the port initialization routine. For example,
- *		the user has to assign the port_phy_addr field which is board
- *		depended parameter.
- *		In this phase any port Tx/Rx activity is halted, MIB counters
- *		are cleared, PHY address is set according to user parameter and
- *		access to DRAM and internal SRAM memory spaces.
- *
- *		Driver ring initialization
- *		Allocating memory for the descriptor rings and buffers is not
- *		within the scope of this driver. Thus, the user is required to
- *		allocate memory for the descriptors ring and buffers. Those
- *		memory parameters are used by the Rx and Tx ring initialization
- *		routines in order to curve the descriptor linked list in a form
- *		of a ring.
- *		Note: Pay special attention to alignment issues when using
- *		cached descriptors/buffers. In this phase the driver store
- *		information in the ETH_PORT_INFO struct regarding each queue
- *		ring.
- *
- *		Driver start
- *		This phase prepares the Ethernet port for Rx and Tx activity.
- *		It uses the information stored in the ETH_PORT_INFO struct to
- *		initialize the various port registers.
- *
- *		Data flow:
- *		All packet references to/from the driver are done using PKT_INFO
- *		struct.
- *		This struct is a unified struct used with Rx and Tx operations.
- *		This way the user is not required to be familiar with neither
- *		Tx nor Rx descriptors structures.
- *		The driver's descriptors rings are management by indexes.
- *		Those indexes controls the ring resources and used to indicate
- *		a SW resource error:
- *		'current'
- *		This index points to the current available resource for use. For
- *		example in Rx process this index will point to the descriptor
- *		that will be passed to the user upon calling the receive routine.
- *		In Tx process, this index will point to the descriptor
- *		that will be assigned with the user packet info and transmitted.
- *		'used'
- *		This index points to the descriptor that need to restore its
- *		resources. For example in Rx process, using the Rx buffer return
- *		API will attach the buffer returned in packet info to the
- *		descriptor pointed by 'used'. In Tx process, using the Tx
- *		descriptor return will merely return the user packet info with
- *		the command status of  the transmitted buffer pointed by the
- *		'used' index. Nevertheless, it is essential to use this routine
- *		to update the 'used' index.
- *		'first'
- *		This index supports Tx Scatter-Gather. It points to the first
- *		descriptor of a packet assembled of multiple buffers. For example
- *		when in middle of Such packet we have a Tx resource error the
- *		'curr' index get the value of 'first' to indicate that the ring
- *		returned to its state before trying to transmit this packet.
- *
- *		Receive operation:
- *		The eth_port_receive API set the packet information struct,
- *		passed by the caller, with received information from the
- *		'current' SDMA descriptor.
- *		It is the user responsibility to return this resource back
- *		to the Rx descriptor ring to enable the reuse of this source.
- *		Return Rx resource is done using the eth_rx_return_buff API.
- *
- *		Transmit operation:
- *		The eth_port_send API supports Scatter-Gather which enables to
- *		send a packet spanned over multiple buffers. This means that
- *		for each packet info structure given by the user and put into
- *		the Tx descriptors ring, will be transmitted only if the 'LAST'
- *		bit will be set in the packet info command status field. This
- *		API also consider restriction regarding buffer alignments and
- *		sizes.
- *		The user must return a Tx resource after ensuring the buffer
- *		has been transmitted to enable the Tx ring indexes to update.
- *
- *		BOARD LAYOUT
- *		This device is on-board.  No jumper diagram is necessary.
- *
- *		EXTERNAL INTERFACE
- *
- *       Prior to calling the initialization routine eth_port_init() the user
- *	 must set the following fields under ETH_PORT_INFO struct:
- *       port_num             User Ethernet port number.
- *       port_phy_addr		    User PHY address of Ethernet port.
- *       port_mac_addr[6]	    User defined port MAC address.
- *       port_config          User port configuration value.
- *       port_config_extend    User port config extend value.
- *       port_sdma_config      User port SDMA config value.
- *       port_serial_control   User port serial control value.
- *       *port_virt_to_phys ()  User function to cast virtual addr to CPU bus addr.
- *       *port_private        User scratch pad for user specific data structures.
- *
- *       This driver introduce a set of default values:
- *       PORT_CONFIG_VALUE           Default port configuration value
- *       PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
- *       PORT_SDMA_CONFIG_VALUE      Default sdma control value
- *       PORT_SERIAL_CONTROL_VALUE   Default port serial control value
- *
- *		This driver data flow is done using the PKT_INFO struct which is
- *		a unified struct for Rx and Tx operations:
- *		byte_cnt	Tx/Rx descriptor buffer byte count.
- *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
- *		cmd_sts		Tx/Rx descriptor command status.
- *		buf_ptr		Tx/Rx descriptor buffer pointer.
- *		return_info	Tx/Rx user resource return information.
- *
- *
- *		EXTERNAL SUPPORT REQUIREMENTS
- *
- *		This driver requires the following external support:
- *
- *		D_CACHE_FLUSH_LINE (address, address offset)
- *
- *		This macro applies assembly code to flush and invalidate cache
- *		line.
- *		address        - address base.
- *		address offset - address offset
- *
- *
- *		CPU_PIPE_FLUSH
- *
- *		This macro applies assembly code to flush the CPU pipeline.
- *
- *******************************************************************************/
-/* includes */
-
-/* defines */
-/* SDMA command macros */
-#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
-
-#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
- (1 << (8 + tx_queue)))
-
-#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
-
-#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
-
-#define CURR_RFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
-
-#define CURR_RFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_RFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
-
-#define USED_RFD_SET(p_used_desc, queue)\
-(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
-
-
-#define CURR_TFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
-
-#define CURR_TFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_TFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
-
-#define USED_TFD_SET(p_used_desc, queue) \
- (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
-
-#define FIRST_TFD_GET(p_first_desc, queue) \
- ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
-
-#define FIRST_TFD_SET(p_first_desc, queue) \
- (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
-
-
-/* Macros that save access to desc in order to find next desc pointer  */
-#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
-
-#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
-
-#define LINK_UP_TIMEOUT		100000
-#define PHY_BUSY_TIMEOUT    10000000
-
-/* locals */
-
-/* PHY routines */
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
-static int ethernet_phy_get (ETH_PORT eth_port_num);
-
-/* Ethernet Port routines */
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param);
-static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option);
-
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count);
-
-void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
-
-
-typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
-u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_dram_bank_size (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64460_CS_0_SIZE);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64460_CS_1_SIZE);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64460_CS_2_SIZE);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64460_CS_3_SIZE);
-	result += 1;
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_internal_sram_base (void)
-{
-	u32 result;
-
-	result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-/*******************************************************************************
-* eth_port_init - Initialize the Ethernet port driver
-*
-* DESCRIPTION:
-*       This function prepares the ethernet port to start its activity:
-*       1) Completes the ethernet port driver struct initialization toward port
-*           start routine.
-*       2) Resets the device to a quiescent state in case of warm reboot.
-*       3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
-*       4) Clean MAC tables. The reset status of those tables is unknown.
-*       5) Set PHY address.
-*       Note: Call this routine prior to eth_port_start routine and after setting
-*       user values in the user fields of Ethernet port control struct (i.e.
-*       port_phy_addr).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       See description.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	ETH_WIN_PARAM win_param;
-
-	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
-	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
-	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
-	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
-
-	p_eth_port_ctrl->port_rx_queue_command = 0;
-	p_eth_port_ctrl->port_tx_queue_command = 0;
-
-	/* Zero out SW structs */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->rx_resource_err[queue] = false;
-	}
-
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->tx_resource_err[queue] = false;
-	}
-
-	eth_port_reset (p_eth_port_ctrl->port_num);
-
-	/* Set access parameters for DRAM bank 0 */
-	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR  */
-	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
-	win_param.size = mv_get_dram_bank_size (BANK0);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 1 */
-	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
-	win_param.size = mv_get_dram_bank_size (BANK1);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 2 */
-	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
-	win_param.size = mv_get_dram_bank_size (BANK2);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 3 */
-	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
-	win_param.size = mv_get_dram_bank_size (BANK3);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for Internal SRAM */
-	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
-	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
-	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
-	win_param.high_addr = 0;
-	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
-	win_param.size = MV64460_INTERNAL_SRAM_SIZE;	/* Get bank size */
-	win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
-
-	ethernet_phy_set (p_eth_port_ctrl->port_num,
-			  p_eth_port_ctrl->port_phy_addr);
-
-	return;
-
-}
-
-/*******************************************************************************
-* eth_port_start - Start the Ethernet port activity.
-*
-* DESCRIPTION:
-*       This routine prepares the Ethernet port for Rx and Tx activity:
-*       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
-*           has been initialized a descriptor's ring (using ether_init_tx_desc_ring
-*           for Tx and ether_init_rx_desc_ring for Rx)
-*       2. Initialize and enable the Ethernet configuration port by writing to
-*           the port's configuration and command registers.
-*       3. Initialize and enable the SDMA by writing to the SDMA's
-*    configuration and command registers.
-*       After completing these steps, the ethernet port SDMA can starts to
-*       perform Rx and Tx activities.
-*
-*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
-*       to calling this function (use ether_init_tx_desc_ring for Tx queues and
-*       ether_init_rx_desc_ring for Rx queues).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       Ethernet port is ready to receive and transmit.
-*
-* RETURN:
-*       false if the port PHY is not up.
-*       true otherwise.
-*
-*******************************************************************************/
-static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	unsigned int phy_reg_data;
-	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
-
-
-	/* Assignment of Tx CTRP of given queue */
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_GET (p_tx_curr_desc, queue);
-		MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_tx_curr_desc));
-
-	}
-
-	/* Assignment of Rx CRDP of given queue */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_GET (p_rx_curr_desc, queue);
-		MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_rx_curr_desc));
-
-		if (p_rx_curr_desc != NULL)
-			/* Add the assigned Ethernet address to the port's address table */
-			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
-					      p_eth_port_ctrl->port_mac_addr,
-					      queue);
-	}
-
-	/* Assign port configuration and command. */
-	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config);
-
-	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config_extend);
-
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      p_eth_port_ctrl->port_serial_control);
-
-	MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-			 ETH_SERIAL_PORT_ENABLE);
-
-	/* Assign port SDMA configuration */
-	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_sdma_config);
-
-	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
-		      (eth_port_num), 0x3fffffff);
-	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
-		      (eth_port_num), 0x03fffcff);
-	/* Turn off the port/queue bandwidth limitation */
-	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
-
-	/* Enable port Rx. */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_rx_queue_command);
-
-	/* Check if link is up */
-	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-	if (!(phy_reg_data & 0x20))
-		return false;
-
-	return true;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr_set - This function Set the port Unicast address.
-*
-* DESCRIPTION:
-*		This function Set the port Ethernet MAC address.
-*
-* INPUT:
-*	ETH_PORT eth_port_num     Port number.
-*	char *        p_addr		Address to be set
-*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
-*
-* OUTPUT:
-*	Set MAC address low and high registers. also calls eth_port_uc_addr()
-*       To set the unicast table with the proper information.
-*
-* RETURN:
-*	N/A.
-*
-*******************************************************************************/
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr, ETH_QUEUE queue)
-{
-	unsigned int mac_h;
-	unsigned int mac_l;
-
-	mac_l = (p_addr[4] << 8) | (p_addr[5]);
-	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
-		(p_addr[2] << 8) | (p_addr[3] << 0);
-
-	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
-	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
-
-	/* Accept frames of this address */
-	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
-
-	return;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr - This function Set the port unicast address table
-*
-* DESCRIPTION:
-*	This function locates the proper entry in the Unicast table for the
-*	specified MAC nibble and sets its properties according to function
-*	parameters.
-*
-* INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char uc_nibble		Unicast MAC Address last nibble.
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
-*
-* OUTPUT:
-*	This function add/removes MAC addresses from the port unicast address
-*	table.
-*
-* RETURN:
-*	true is output succeeded.
-*	false if option parameter is invalid.
-*
-*******************************************************************************/
-static bool eth_port_uc_addr (ETH_PORT eth_port_num,
-			      unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option)
-{
-	unsigned int unicast_reg;
-	unsigned int tbl_offset;
-	unsigned int reg_offset;
-
-	/* Locate the Unicast table entry */
-	uc_nibble = (0xf & uc_nibble);
-	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
-	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
-
-	switch (option) {
-	case REJECT_MAC_ADDR:
-		/* Clear accepts frame bit at specified unicast DA table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg &= (0x0E << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-		break;
-
-	case ACCEPT_MAC_ADDR:
-		/* Set accepts frame bit at unicast DA filter table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-
-		break;
-
-	default:
-		return false;
-	}
-	return true;
-}
-
-
-/*******************************************************************************
-* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
-*
-* DESCRIPTION:
-*       Go through all the DA filter tables (Unicast, Special Multicast & Other
-*       Multicast) and set each entry to 0.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Multicast and Unicast packets are rejected.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
-{
-	int table_index;
-
-	/* Clear DA filter unicast table (Ex_dFUT) */
-	for (table_index = 0; table_index <= 0xC; table_index += 4)
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num) + table_index), 0);
-
-	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
-		/* Clear DA filter special multicast table (Ex_dFSMT) */
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-		/* Clear DA filter other multicast table (Ex_dFOMT) */
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-	}
-}
-
-/*******************************************************************************
-* eth_clear_mib_counters - Clear all MIB counters
-*
-* DESCRIPTION:
-*       This function clears all MIB counters of a specific ethernet port.
-*       A read from the MIB counter will reset the counter.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       After reading all MIB counters, the counters resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-static void eth_clear_mib_counters (ETH_PORT eth_port_num)
-{
-	int i;
-	unsigned int dummy;
-
-	/* Perform dummy reads from MIB counters */
-	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
-	     i += 4)
-		dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
-				      (eth_port_num) + i));
-
-	return;
-}
-
-/*******************************************************************************
-* eth_read_mib_counter - Read a MIB counter
-*
-* DESCRIPTION:
-*       This function reads a MIB counter of a specific ethernet port.
-*       NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
-*       following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
-*       register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
-*       ETH_MIB_GOOD_OCTETS_SENT_HIGH
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*       unsigned int mib_offset   MIB counter offset (use ETH_MIB_... macros).
-*
-* OUTPUT:
-*       After reading the MIB counter, the counter resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset)
-{
-	return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
-			     + mib_offset));
-}
-
-/*******************************************************************************
-* ethernet_phy_set - Set the ethernet port PHY address.
-*
-* DESCRIPTION:
-*       This routine set the ethernet port PHY address according to given
-*       parameter.
-*
-* INPUT:
-*		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Set PHY Address Register with given PHY address parameter.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
-
-	reg_data &= ~(0x1F << (5 * eth_port_num));
-	reg_data |= (phy_addr << (5 * eth_port_num));
-
-	MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
-
-	return;
-}
-
-/*******************************************************************************
- * ethernet_phy_get - Get the ethernet port PHY address.
- *
- * DESCRIPTION:
- *       This routine returns the given ethernet port PHY address.
- *
- * INPUT:
- *		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       None.
- *
- * RETURN:
- *       PHY address.
- *
- *******************************************************************************/
-static int ethernet_phy_get (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
-
-	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
-}
-
-/*******************************************************************************
- * ethernet_phy_reset - Reset Ethernet port PHY.
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to reset the ethernet port PHY.
- *       The routine waits until the link is up again or link up is timeout.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       The ethernet port PHY renew its link.
- *
- * RETURN:
- *       None.
- *
-*******************************************************************************/
-static bool ethernet_phy_reset (ETH_PORT eth_port_num)
-{
-	unsigned int time_out = 50;
-	unsigned int phy_reg_data;
-
-	/* Reset the PHY */
-	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
-	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
-	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
-
-	/* Poll on the PHY LINK */
-	do {
-		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-		if (time_out-- == 0)
-			return false;
-	}
-	while (!(phy_reg_data & 0x20));
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_reset - Reset Ethernet port
- *
- * DESCRIPTION:
- * 	This routine resets the chip by aborting any SDMA engine activity and
- *      clearing the MIB counters. The Receiver and the Transmit unit are in
- *      idle state after this command is performed and the port is disabled.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       Channel activity is halted.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_port_reset (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	/* Stop Tx port activity. Check port Tx activity. */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Tx activity to terminate. */
-		do {
-			/* Check port cause register that all Tx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-	/* Stop Rx port activity. Check port Rx activity. */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Rx activity to terminate. */
-		do {
-			/* Check port cause register that all Rx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-
-	/* Clear all MIB counters */
-	eth_clear_mib_counters (eth_port_num);
-
-	/* Reset the Enable bit in the Configuration Register */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
-			     (eth_port_num));
-	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      reg_data);
-
-	return;
-}
-
-
-
-
-/*******************************************************************************
- * eth_port_read_smi_reg - Read PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform PHY register read.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       unsigned int   phy_reg   PHY register address offset.
- *       unsigned int   *value   Register value buffer.
- *
- * OUTPUT:
- *       Write the value of a specified PHY register into given buffer.
- *
- * RETURN:
- *       false if the PHY is busy or read data is not in valid state.
- *       true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
-				   unsigned int phy_reg, unsigned int *value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-/*    printf("     Phy-Port %d has addess %d  \n",eth_port_num, phy_addr );*/
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_READ);
-
-	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
-
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID);	/* Bit set equ operation done */
-
-	/* Wait for the data to update in the SMI register */
-#define PHY_UPDATE_TIMEOUT	10000
-	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
-
-	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-
-	*value = reg_value & 0xffff;
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_write_smi_reg - Write to PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform writes to PHY registers.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *      unsigned int   phy_reg   PHY register address offset.
- *      unsigned int    value   Register value.
- *
- * OUTPUT:
- *      Write the given value to the specified PHY register.
- *
- * RETURN:
- *      false if the PHY is busy.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
-				    unsigned int phy_reg, unsigned int value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-	return true;
-}
-
-/*******************************************************************************
- * eth_set_access_control - Config address decode parameters for Ethernet unit
- *
- * DESCRIPTION:
- *       This function configures the address decode parameters for the Gigabit
- *       Ethernet Controller according the given parameters struct.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       ETH_WIN_PARAM  *param   Address decode parameter struct.
- *
- * OUTPUT:
- *       An access window is opened using the given access parameters.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param)
-{
-	unsigned int access_prot_reg;
-
-	/* Set access control register */
-	access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
-				       (eth_port_num));
-	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
-	access_prot_reg |= (param->access_ctrl << (param->win * 2));
-	MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
-		      access_prot_reg);
-
-	/* Set window Size reg (SR) */
-	MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
-		       (ETH_SIZE_REG_GAP * param->win)),
-		      (((param->size / 0x10000) - 1) << 16));
-
-	/* Set window Base address reg (BA) */
-	MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
-		      (param->target | param->attributes | param->base_addr));
-	/* High address remap reg (HARR) */
-	if (param->win < 4)
-		MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
-			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
-			      param->high_addr);
-
-	/* Base address enable reg (BARER) */
-	if (param->enable == 1)
-		MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
-				   (1 << param->win));
-	else
-		MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
-				 (1 << param->win));
-}
-
-/*******************************************************************************
- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Rx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      int 			rx_desc_num       Number of Rx descriptors
- *      int 			rx_buff_size      Size of Rx buffer
- *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
- *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Rx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE rx_queue,
-				     int rx_desc_num,
-				     int rx_buff_size,
-				     unsigned int rx_desc_base_addr,
-				     unsigned int rx_buff_base_addr)
-{
-	ETH_RX_DESC *p_rx_desc;
-	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
-	p_rx_prev_desc = p_rx_desc;
-	buffer_addr = rx_buff_base_addr;
-
-	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (rx_buff_base_addr & 0xF)
-		return false;
-
-	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
-		return false;
-
-	/* Rx buffers must be 64-bit aligned.       */
-	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
-		return false;
-
-	/* initialize the Rx descriptors ring */
-	for (ix = 0; ix < rx_desc_num; ix++) {
-		p_rx_desc->buf_size = rx_buff_size;
-		p_rx_desc->byte_cnt = 0x0000;
-		p_rx_desc->cmd_sts =
-			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-		p_rx_desc->next_desc_ptr =
-			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
-		p_rx_desc->buf_ptr = buffer_addr;
-		p_rx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
-		buffer_addr += rx_buff_size;
-		p_rx_prev_desc = p_rx_desc;
-		p_rx_desc = (ETH_RX_DESC *)
-			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
-	}
-
-	/* Closing Rx descriptors ring */
-	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
-	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
-
-	/* Save Rx desc pointer to driver struct. */
-	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-
-	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
-		(ETH_RX_DESC *) rx_desc_base_addr;
-	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
-		rx_desc_num * RX_DESC_ALIGNED_SIZE;
-
-	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Tx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *      int 			tx_desc_num       Number of Tx descriptors
- *      int 			tx_buff_size      Size of Tx buffer
- *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
- *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Tx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE tx_queue,
-				     int tx_desc_num,
-				     int tx_buff_size,
-				     unsigned int tx_desc_base_addr,
-				     unsigned int tx_buff_base_addr)
-{
-
-	ETH_TX_DESC *p_tx_desc;
-	ETH_TX_DESC *p_tx_prev_desc;
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	/* save the first desc pointer to link with the last descriptor */
-	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
-	p_tx_prev_desc = p_tx_desc;
-	buffer_addr = tx_buff_base_addr;
-
-	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (tx_buff_base_addr & 0xF)
-		return false;
-
-	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
-	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
-		return false;
-
-	/* Initialize the Tx descriptors ring */
-	for (ix = 0; ix < tx_desc_num; ix++) {
-		p_tx_desc->byte_cnt = 0x0000;
-		p_tx_desc->l4i_chk = 0x0000;
-		p_tx_desc->cmd_sts = 0x00000000;
-		p_tx_desc->next_desc_ptr =
-			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
-
-		p_tx_desc->buf_ptr = buffer_addr;
-		p_tx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
-		buffer_addr += tx_buff_size;
-		p_tx_prev_desc = p_tx_desc;
-		p_tx_desc = (ETH_TX_DESC *)
-			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
-
-	}
-	/* Closing Tx descriptors ring */
-	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
-	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
-	/* Set Tx desc pointer in driver struct. */
-	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-
-	/* Init Tx ring base and size parameters */
-	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
-		(ETH_TX_DESC *) tx_desc_base_addr;
-	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
-		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
-
-	/* Add the queue to the list of Tx queues of this port */
-	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_send - Send an Ethernet packet
- *
- * DESCRIPTION:
- *	This routine send a given packet described by p_pktinfo parameter. It
- *      supports transmitting of a packet spaned over multiple buffers. The
- *      routine updates 'curr' and 'first' indexes according to the packet
- *      segment passed to the routine. In case the packet segment is first,
- *      the 'first' index is update. In any case, the 'curr' index is updated.
- *      If the routine get into Tx resource error it assigns 'curr' index as
- *      'first'. This way the function can abort Tx process of multiple
- *      descriptors per packet.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'curr' and 'first' indexes are updated.
- *
- * RETURN:
- *      ETH_QUEUE_FULL in case of Tx resource error.
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
-					  ETH_QUEUE tx_queue,
-					  PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_first;
-	volatile ETH_TX_DESC *p_tx_desc_curr;
-	volatile ETH_TX_DESC *p_tx_next_desc_curr;
-	volatile ETH_TX_DESC *p_tx_desc_used;
-	unsigned int command_status;
-
-	/* Do not process Tx ring in case of Tx ring resource error */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		return ETH_QUEUE_FULL;
-
-	/* Get the Tx Desc ring indexes */
-	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-
-	if (p_tx_desc_curr == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
-	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
-
-	if (command_status & (ETH_TX_FIRST_DESC)) {
-		/* Update first desc */
-		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
-		p_tx_desc_first = p_tx_desc_curr;
-	} else {
-		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-		command_status |= ETH_BUFFER_OWNED_BY_DMA;
-	}
-
-	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
-	/* boundary. We use the memory allocated for Tx descriptor. This memory  */
-	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
-	if (p_pkt_info->byte_cnt <= 8) {
-		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
-		return ETH_ERROR;
-
-		p_tx_desc_curr->buf_ptr =
-			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
-		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
-			    p_pkt_info->byte_cnt);
-	} else
-		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
-
-	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
-	p_tx_desc_curr->return_info = p_pkt_info->return_info;
-
-	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
-		/* Set last desc with DMA ownership and interrupt enable. */
-		p_tx_desc_curr->cmd_sts = command_status |
-			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
-
-		if (p_tx_desc_curr != p_tx_desc_first)
-			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
-
-		/* Flush CPU pipe */
-
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
-		CPU_PIPE_FLUSH;
-
-		/* Apply send command */
-		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
-
-		/* Finish Tx packet. Update first desc in case of Tx resource error */
-		p_tx_desc_first = p_tx_next_desc_curr;
-		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
-
-	} else {
-		p_tx_desc_curr->cmd_sts = command_status;
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-	}
-
-	/* Check for ring index overlap in the Tx desc ring */
-	if (p_tx_next_desc_curr == p_tx_desc_used) {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_desc_first, tx_queue);
-
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
-		return ETH_QUEUE_LAST_RESOURCE;
-	} else {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
-		return ETH_OK;
-	}
-}
-
-/*******************************************************************************
- * eth_tx_return_desc - Free all used Tx descriptors
- *
- * DESCRIPTION:
- *	This routine returns the transmitted packet information to the caller.
- *      It uses the 'first' index to support Tx desc return in case a transmit
- *      of a packet spanned over multiple buffer still in process.
- *      In case the Tx queue was in "resource error" condition, where there are
- *      no available Tx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'first' and 'used' indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *      ETH_RETRY in case there is transmission in process.
- *	ETH_END_OF_JOB if the routine has nothing to release.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE tx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
-	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
-	unsigned int command_status;
-
-
-	/* Get the Tx Desc ring indexes */
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-
-
-	/* Sanity check */
-	if (p_tx_desc_used == NULL)
-		return ETH_ERROR;
-
-	command_status = p_tx_desc_used->cmd_sts;
-
-	/* Still transmitting... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_RETRY;
-	}
-
-	/* Stop release. About to overlap the current available Tx descriptor */
-	if ((p_tx_desc_used == p_tx_desc_first) &&
-	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_END_OF_JOB;
-	}
-
-	/* Pass the packet information to the caller */
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->return_info = p_tx_desc_used->return_info;
-	p_tx_desc_used->return_info = 0;
-
-	/* Update the next descriptor to release. */
-	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
-
-	/* Any Tx return cancels the Tx resource error status */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-
-	return ETH_OK;
-
-}
-
-/*******************************************************************************
- * eth_port_receive - Get received information from Rx ring.
- *
- * DESCRIPTION:
- * 	This routine returns the received data to the caller. There is no
- *	data copying during routine operation. All information is returned
- *	using pointer to packet information struct passed from the caller.
- *      If the routine exhausts	Rx ring resources then the resource error flag
- *      is set.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Rx ring current and used indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
- *	ETH_END_OF_JOB if there is no received data.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_next_curr_desc;
-	volatile ETH_RX_DESC *p_rx_used_desc;
-	unsigned int command_status;
-
-	/* Do not process Rx ring in case of Rx ring resource error */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
-		printf ("\nRx Queue is full ...\n");
-		return ETH_QUEUE_FULL;
-	}
-
-	/* Get the Rx Desc ring 'curr and 'used' indexes */
-	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
-	USED_RFD_GET (p_rx_used_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_rx_curr_desc == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
-	command_status = p_rx_curr_desc->cmd_sts;
-
-	/* Nothing to receive... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
-		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
-		return ETH_END_OF_JOB;
-	}
-
-	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
-	p_pkt_info->return_info = p_rx_curr_desc->return_info;
-	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size;	/* IP fragment indicator */
-
-	/* Clean the return info field to indicate that the packet has been */
-	/* moved to the upper layers                                        */
-	p_rx_curr_desc->return_info = 0;
-
-	/* Update 'curr' in data structure */
-	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
-
-	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
-	if (p_rx_next_curr_desc == p_rx_used_desc)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-	CPU_PIPE_FLUSH;
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
- *
- * DESCRIPTION:
- *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
- *      next 'used' descriptor and attached the returned buffer to it.
- *      In case the Rx ring was in "resource error" condition, where there are
- *      no available Rx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
- *
- * OUTPUT:
- *	New available Rx resource in Rx descriptor ring.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE rx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
-
-	/* Get 'used' Rx descriptor */
-	USED_RFD_GET (p_used_rx_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_used_rx_desc == NULL)
-		return ETH_ERROR;
-
-	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
-	p_used_rx_desc->return_info = p_pkt_info->return_info;
-	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
-	p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE;	/* Reset Buffer size */
-
-	/* Flush the write pipe */
-	CPU_PIPE_FLUSH;
-
-	/* Return the descriptor to DMA ownership */
-	p_used_rx_desc->cmd_sts =
-		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-
-	/* Flush descriptor and CPU pipe */
-	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
-	CPU_PIPE_FLUSH;
-
-	/* Move the used descriptor pointer to the next descriptor */
-	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
-
-	/* Any Rx return cancels the Rx resource error status */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
-
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
- *
- * DESCRIPTION:
- *	This routine sets the RX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the tClk of the MV-643xx chip
- *	, and the required delay of the interrupt in usec.
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in usec
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-/*******************************************************************************
- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
- *
- * DESCRIPTION:
- *	This routine sets the TX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the t_cLK frequency of the
- *	MV-643xx chip and the required delay in the interrupt in uSec
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in uSeconds
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-
-/*******************************************************************************
- * eth_b_copy - Copy bytes from source to destination
- *
- * DESCRIPTION:
- *       This function supports the eight bytes limitation on Tx buffer size.
- *       The routine will zero eight bytes starting from the destination address
- *       followed by copying bytes from the source address to the destination.
- *
- * INPUT:
- *       unsigned int src_addr    32 bit source address.
- *       unsigned int dst_addr    32 bit destination address.
- *       int        byte_count    Number of bytes to copy.
- *
- * OUTPUT:
- *       See description.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count)
-{
-	/* Zero the dst_addr area */
-	*(unsigned int *) dst_addr = 0x0;
-
-	while (byte_count != 0) {
-		*(char *) dst_addr = *(char *) src_addr;
-		dst_addr++;
-		src_addr++;
-		byte_count--;
-	}
-}
diff --git a/board/Marvell/db64460/mv_eth.h b/board/Marvell/db64460/mv_eth.h
deleted file mode 100644
index 23c200bf8a..0000000000
--- a/board/Marvell/db64460/mv_eth.h
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __DB64460_ETH_H__
-#define __DB64460_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-#include <net.h>
-#include "mv_regs.h"
-#include "../common/ppc_error_no.h"
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
-#ifndef MAX_SKB_FRAGS
-#define MAX_SKB_FRAGS 0
-#endif
-
-/* Port attributes */
-/*#define MAX_RX_QUEUE_NUM	8*/
-/*#define MAX_TX_QUEUE_NUM	8*/
-#define MAX_RX_QUEUE_NUM	1
-#define MAX_TX_QUEUE_NUM	1
-
-
-/* Use one TX queue and one RX queue */
-#define MV64460_TX_QUEUE_NUM 1
-#define MV64460_RX_QUEUE_NUM 1
-
-/*
- * Number of RX / TX descriptors on RX / TX rings.
- * Note that allocating RX descriptors is done by allocating the RX
- * ring AND a preallocated RX buffers (skb's) for each descriptor.
- * The TX descriptors only allocates the TX descriptors ring,
- * with no pre allocated TX buffers (skb's are allocated by higher layers.
- */
-
-/* Default TX ring size is 10 descriptors */
-#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE
-#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE
-#else
-#define MV64460_TX_QUEUE_SIZE 4
-#endif
-
-/* Default RX ring size is 4 descriptors */
-#ifdef	CONFIG_MV64460_ETH_RXQUEUE_SIZE
-#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE
-#else
-#define MV64460_RX_QUEUE_SIZE 4
-#endif
-
-#ifdef CONFIG_RX_BUFFER_SIZE
-#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
-#else
-#define MV64460_RX_BUFFER_SIZE 1600
-#endif
-
-#ifdef CONFIG_TX_BUFFER_SIZE
-#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
-#else
-#define MV64460_TX_BUFFER_SIZE 1600
-#endif
-
-/*
- *	Network device statistics. Akin to the 2.0 ether stats but
- *	with byte counters.
- */
-
-struct net_device_stats
-{
-	unsigned long	rx_packets;		/* total packets received	*/
-	unsigned long	tx_packets;		/* total packets transmitted	*/
-	unsigned long	rx_bytes;		/* total bytes received		*/
-	unsigned long	tx_bytes;		/* total bytes transmitted	*/
-	unsigned long	rx_errors;		/* bad packets received		*/
-	unsigned long	tx_errors;		/* packet transmit problems	*/
-	unsigned long	rx_dropped;		/* no space in linux buffers	*/
-	unsigned long	tx_dropped;		/* no space available in linux	*/
-	unsigned long	multicast;		/* multicast packets received	*/
-	unsigned long	collisions;
-
-	/* detailed rx_errors: */
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
-	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
-	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
-	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-
-	/* for cslip etc */
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
-};
-
-
-/* Private data structure used for ethernet device */
-struct mv64460_eth_priv {
-    unsigned int port_num;
-    struct net_device_stats *stats;
-
-/* to buffer area aligned */
-    char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
-    char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
-
-    /* Size of Tx Ring per queue */
-    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
-
-
-    /* Size of Rx Ring per queue */
-    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
-
-    /* Magic Number for Ethernet running */
-    unsigned int eth_running;
-
-};
-
-int mv64460_eth_init (struct eth_device *dev);
-int mv64460_eth_stop (struct eth_device *dev);
-int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
-/*	return db64460_eth0_poll(); */
-
-int mv64460_eth_open (struct eth_device *dev);
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-
-/********************************************************************************
- * Header File for : MV-643xx network interface header
- *
- * DESCRIPTION:
- *	 This header file contains macros typedefs and function declaration for
- *	 the Marvell Gig Bit Ethernet Controller.
- *
- * DEPENDENCIES:
- *	 None.
- *
- *******************************************************************************/
-
-
-#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
-#ifdef CONFIG_MV64460_SRAM_CACHEABLE
-/* In case SRAM is cacheable but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case SRAM is cache coherent or non-cacheable */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif
-#else
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/* In case of descriptors on DDR but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case of descriptors on DDR and cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
-
-
-#define CPU_PIPE_FLUSH		   \
-{		  \
-  __asm__ __volatile__ ("eieio");	  \
-}
-
-
-/* defines  */
-
-/* Default port configuration value */
-#define PORT_CONFIG_VALUE			\
-	     ETH_UNICAST_NORMAL_MODE		|   \
-	     ETH_DEFAULT_RX_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
-	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
-	     ETH_RECEIVE_BC_IF_IP		|   \
-	     ETH_RECEIVE_BC_IF_ARP		|   \
-	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
-	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
-	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-/* Default port extend configuration value */
-#define PORT_CONFIG_EXTEND_VALUE		\
-	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
-	     ETH_PARTITION_DISABLE
-
-
-/* Default sdma control value */
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PORT_SDMA_CONFIG_VALUE				\
-			 ETH_RX_BURST_SIZE_16_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_16_64BIT;
-#else
-#define PORT_SDMA_CONFIG_VALUE			\
-			 ETH_RX_BURST_SIZE_4_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_4_64BIT;
-#endif
-
-#define GT_ETH_IPG_INT_RX(value)		\
-	    ((value & 0x3fff) << 8)
-
-/* Default port serial control value */
-#define PORT_SERIAL_CONTROL_VALUE			    \
-			ETH_FORCE_LINK_PASS			|	\
-			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-			ETH_FORCE_BP_MODE_NO_JAM		|	\
-			BIT9					|	\
-			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-			ETH_RETRANSMIT_16_ETTEMPTS		|	\
-			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-			ETH_DTE_ADV_0				|	\
-			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-			ETH_AUTO_NEG_NO_CHANGE			|	\
-			ETH_MAX_RX_PACKET_1552BYTE		|	\
-			ETH_CLR_EXT_LOOPBACK			|	\
-			ETH_SET_FULL_DUPLEX_MODE		|	\
-			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
-
-#define RX_BUFFER_MAX_SIZE  0xFFFF
-#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
-
-#define RX_BUFFER_MIN_SIZE  0x8
-#define TX_BUFFER_MIN_SIZE  0x8
-
-/* Tx WRR confoguration macros */
-#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
-#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
-#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
-
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR	    0
-#define REJECT_MAC_ADDR	    1
-
-/* Size of a Tx/Rx descriptor used in chain list data structure */
-#define RX_DESC_ALIGNED_SIZE		0x20
-#define TX_DESC_ALIGNED_SIZE		0x20
-
-/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
-#define TX_BUF_OFFSET_IN_DESC	    0x18
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET				0x2
-
-/* Gap define */
-#define ETH_BAR_GAP					0x8
-#define ETH_SIZE_REG_GAP				0x8
-#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
-#define ETH_PORT_ACCESS_CTRL_GAP			0x4
-
-/* Gigabit Ethernet Unit Global Registers */
-
-/* MIB Counters register definitions */
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
-#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
-#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
-#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
-#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
-#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
-#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
-#define ETH_MIB_FRAMES_64_OCTETS	   0x20
-#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
-#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
-#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
-#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
-#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
-#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
-#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
-#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
-#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
-#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
-#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
-#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
-#define ETH_MIB_FC_SENT			   0x54
-#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
-#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
-#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
-#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
-#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
-#define ETH_MIB_JABBER_RECEIVED		   0x6c
-#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
-#define ETH_MIB_BAD_CRC_EVENT		   0x74
-#define ETH_MIB_COLLISION		   0x78
-#define ETH_MIB_LATE_COLLISION		   0x7c
-
-/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_GMII_MII				0
-#define ETH_INTERFACE_PCM				BIT0
-#define ETH_LINK_IS_DOWN				0
-#define ETH_LINK_IS_UP					BIT1
-#define ETH_PORT_AT_HALF_DUPLEX				0
-#define ETH_PORT_AT_FULL_DUPLEX				BIT2
-#define ETH_RX_FLOW_CTRL_DISABLED			0
-#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
-#define ETH_GMII_SPEED_100_10				0
-#define ETH_GMII_SPEED_1000				BIT4
-#define ETH_MII_SPEED_10				0
-#define ETH_MII_SPEED_100				BIT5
-#define ETH_NO_TX					0
-#define ETH_TX_IN_PROGRESS				BIT7
-#define ETH_BYPASS_NO_ACTIVE				0
-#define ETH_BYPASS_ACTIVE				BIT8
-#define ETH_PORT_NOT_AT_PARTITION_STATE			0
-#define ETH_PORT_AT_PARTITION_STATE			BIT9
-#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
-#define ETH_PORT_TX_FIFO_EMPTY				BIT10
-
-
-/* These macros describes the Port configuration reg (Px_cR) bits */
-#define ETH_UNICAST_NORMAL_MODE				0
-#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
-#define ETH_DEFAULT_RX_QUEUE_0				0
-#define ETH_DEFAULT_RX_QUEUE_1				BIT1
-#define ETH_DEFAULT_RX_QUEUE_2				BIT2
-#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_4				BIT3
-#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
-#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
-#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
-#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
-#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
-#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
-#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
-#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
-#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
-#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
-#define ETH_RECEIVE_BC_IF_IP				0
-#define ETH_REJECT_BC_IF_IP				BIT8
-#define ETH_RECEIVE_BC_IF_ARP				0
-#define ETH_REJECT_BC_IF_ARP				BIT9
-#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
-#define ETH_CAPTURE_TCP_FRAMES_DIS			0
-#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
-#define ETH_CAPTURE_UDP_FRAMES_DIS			0
-#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
-#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
-#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
-#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
-#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
-#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
-#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
-#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
-#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
-#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
-#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
-#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
-#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
-#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
-#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
-#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
-#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
-
-
-/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define ETH_CLASSIFY_EN					BIT0
-#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
-#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
-#define ETH_PARTITION_DISABLE				0
-#define ETH_PARTITION_ENABLE				BIT2
-
-
-/* Tx/Rx queue command reg (RQCR/TQCR)*/
-#define ETH_QUEUE_0_ENABLE				BIT0
-#define ETH_QUEUE_1_ENABLE				BIT1
-#define ETH_QUEUE_2_ENABLE				BIT2
-#define ETH_QUEUE_3_ENABLE				BIT3
-#define ETH_QUEUE_4_ENABLE				BIT4
-#define ETH_QUEUE_5_ENABLE				BIT5
-#define ETH_QUEUE_6_ENABLE				BIT6
-#define ETH_QUEUE_7_ENABLE				BIT7
-#define ETH_QUEUE_0_DISABLE				BIT8
-#define ETH_QUEUE_1_DISABLE				BIT9
-#define ETH_QUEUE_2_DISABLE				BIT10
-#define ETH_QUEUE_3_DISABLE				BIT11
-#define ETH_QUEUE_4_DISABLE				BIT12
-#define ETH_QUEUE_5_DISABLE				BIT13
-#define ETH_QUEUE_6_DISABLE				BIT14
-#define ETH_QUEUE_7_DISABLE				BIT15
-
-/* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define ETH_RIFB					BIT0
-#define ETH_RX_BURST_SIZE_1_64BIT			0
-#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
-#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
-#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
-#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
-#define ETH_BLM_RX_NO_SWAP				BIT4
-#define ETH_BLM_RX_BYTE_SWAP				0
-#define ETH_BLM_TX_NO_SWAP				BIT5
-#define ETH_BLM_TX_BYTE_SWAP				0
-#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
-#define ETH_DESCRIPTORS_NO_SWAP				0
-#define ETH_TX_BURST_SIZE_1_64BIT			0
-#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
-#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
-#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
-#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
-
-/* These macros describes the Port serial control reg (PSCR) bits */
-#define ETH_SERIAL_PORT_DISABLE				0
-#define ETH_SERIAL_PORT_ENABLE				BIT0
-#define ETH_FORCE_LINK_PASS				BIT1
-#define ETH_DO_NOT_FORCE_LINK_PASS			0
-#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
-#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
-#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
-#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
-#define ETH_ADV_NO_FLOW_CTRL				0
-#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
-#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
-#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
-#define ETH_FORCE_BP_MODE_NO_JAM			0
-#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
-#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
-#define ETH_FORCE_LINK_FAIL				0
-#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
-#define ETH_RETRANSMIT_16_ETTEMPTS			0
-#define ETH_RETRANSMIT_FOREVER				BIT11
-#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
-#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
-#define ETH_DTE_ADV_0					0
-#define ETH_DTE_ADV_1					BIT14
-#define ETH_DISABLE_AUTO_NEG_BYPASS			0
-#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
-#define ETH_AUTO_NEG_NO_CHANGE				0
-#define ETH_RESTART_AUTO_NEG				BIT16
-#define ETH_MAX_RX_PACKET_1518BYTE			0
-#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
-#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
-#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
-#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
-#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
-#define ETH_SET_EXT_LOOPBACK				BIT20
-#define ETH_CLR_EXT_LOOPBACK				0
-#define ETH_SET_FULL_DUPLEX_MODE			BIT21
-#define ETH_SET_HALF_DUPLEX_MODE			0
-#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
-#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
-#define ETH_SET_GMII_SPEED_TO_10_100			0
-#define ETH_SET_GMII_SPEED_TO_1000			BIT23
-#define ETH_SET_MII_SPEED_TO_10				0
-#define ETH_SET_MII_SPEED_TO_100			BIT24
-
-
-/* SMI reg */
-#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
-#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
-
-/* SDMA command status fields macros */
-
-/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY		    (BIT0)
-
-/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
-
-/* Tx descriptors status */
-#define ETH_LC_ERROR			    (0	  )
-#define ETH_UR_ERROR			    (BIT1 )
-#define ETH_RL_ERROR			    (BIT2 )
-#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
-
-/* Rx descriptors status */
-#define ETH_CRC_ERROR			    (0	  )
-#define ETH_OVERRUN_ERROR		    (BIT1 )
-#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
-#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
-#define ETH_VLAN_TAGGED			    (BIT19)
-#define ETH_BPDU_FRAME			    (BIT20)
-#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
-#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
-#define ETH_OTHER_FRAME_TYPE		    (BIT22)
-#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
-#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
-#define ETH_FRAME_HEADER_OK		    (BIT25)
-#define ETH_RX_LAST_DESC		    (BIT26)
-#define ETH_RX_FIRST_DESC		    (BIT27)
-#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
-#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
-#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
-
-/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED		    (BIT2)
-
-/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
-#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
-#define ETH_TCP_FRAME			    (0	  )
-#define ETH_UDP_FRAME			    (BIT16)
-#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
-#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
-#define ETH_ZERO_PADDING		    (BIT19)
-#define ETH_TX_LAST_DESC		    (BIT20)
-#define ETH_TX_FIRST_DESC		    (BIT21)
-#define ETH_GEN_CRC			    (BIT22)
-#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
-#define ETH_AUTO_MODE			    (BIT30)
-
-/* Address decode parameters */
-/* Ethernet Base Address Register bits */
-#define EBAR_TARGET_DRAM					0x00000000
-#define EBAR_TARGET_DEVICE					0x00000001
-#define EBAR_TARGET_CBS						0x00000002
-#define EBAR_TARGET_PCI0					0x00000003
-#define EBAR_TARGET_PCI1					0x00000004
-#define EBAR_TARGET_CUNIT					0x00000005
-#define EBAR_TARGET_AUNIT					0x00000006
-#define EBAR_TARGET_GUNIT					0x00000007
-
-/* Window attributes */
-#define EBAR_ATTR_DRAM_CS0					0x00000E00
-#define EBAR_ATTR_DRAM_CS1					0x00000D00
-#define EBAR_ATTR_DRAM_CS2					0x00000B00
-#define EBAR_ATTR_DRAM_CS3					0x00000700
-
-/* DRAM Target interface */
-#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
-
-/* Device Bus Target interface */
-#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
-#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
-#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
-#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
-#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
-
-/* PCI Target interface */
-#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
-#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
-#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
-#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
-#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
-#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
-#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
-#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
-#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
-#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
-
-/* CPU 60x bus or internal SRAM interface */
-#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
-#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
-#define EBAR_ATTR_CBS_SRAM					0x00000000
-#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
-
-/* Window access control */
-#define EWIN_ACCESS_NOT_ALLOWED 0
-#define EWIN_ACCESS_READ_ONLY	BIT0
-#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
-#define EWIN0_ACCESS_MASK		0x0003
-#define EWIN1_ACCESS_MASK		0x000C
-#define EWIN2_ACCESS_MASK		0x0030
-#define EWIN3_ACCESS_MASK		0x00C0
-
-/* typedefs */
-
-typedef enum _eth_port
-{
-    ETH_0 = 0,
-	ETH_1 = 1,
-	ETH_2 = 2
-}ETH_PORT;
-
-typedef enum _eth_func_ret_status
-{
-    ETH_OK,			/* Returned as expected.		    */
-    ETH_ERROR,			/* Fundamental error.			    */
-    ETH_RETRY,			/* Could not process request. Try later.    */
-    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
-    ETH_QUEUE_FULL,		/* Ring resource error.			    */
-    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
-}ETH_FUNC_RET_STATUS;
-
-typedef enum _eth_queue
-{
-	ETH_Q0 = 0,
-	ETH_Q1 = 1,
-	ETH_Q2 = 2,
-	ETH_Q3 = 3,
-	ETH_Q4 = 4,
-	ETH_Q5 = 5,
-	ETH_Q6 = 6,
-    ETH_Q7 = 7
-} ETH_QUEUE;
-
-typedef enum _addr_win
-{
-	ETH_WIN0,
-	ETH_WIN1,
-	ETH_WIN2,
-	ETH_WIN3,
-	ETH_WIN4,
-    ETH_WIN5
-} ETH_ADDR_WIN;
-
-typedef enum _eth_target
-{
-	ETH_TARGET_DRAM	 ,
-	ETH_TARGET_DEVICE,
-	ETH_TARGET_CBS	 ,
-	ETH_TARGET_PCI0	 ,
-	ETH_TARGET_PCI1
-}ETH_TARGET;
-
-typedef struct _eth_rx_desc
-{
-	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
-	unsigned short	buf_size	   ;	/* Buffer size			    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_RX_DESC;
-
-
-typedef struct _eth_tx_desc
-{
-    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
-    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
-    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
-    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
-    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_TX_DESC;
-
-/* Unified struct for Rx and Tx operations. The user is not required to */
-/* be familier with neither Tx nor Rx descriptors.			 */
-typedef struct _pkt_info
-{
-	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
-	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} PKT_INFO;
-
-
-typedef struct _eth_win_param
-{
-    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
-    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
-    unsigned short attributes;	/* BAR attributes. See above macros. */
-    unsigned int base_addr; /* Window base address in unsigned int form */
-    unsigned int high_addr; /* Window high address in unsigned int form */
-    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
-    bool enable; /* Enable/disable access to the window. */
-    unsigned short access_ctrl; /* Access ctrl register. see above macros */
-} ETH_WIN_PARAM;
-
-
-/* Ethernet port specific infomation */
-
-typedef struct _eth_port_ctrl
-{
-    ETH_PORT  port_num; /* User Ethernet port number */
-    int port_phy_addr;	/* User phy address of Ethrnet port */
-    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
-    unsigned int  port_config; /* User port configuration value */
-    unsigned int  port_config_extend; /* User port config extend value */
-    unsigned int  port_sdma_config; /* User port SDMA config value */
-    unsigned int  port_serial_control; /* User port serial control value */
-    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
-    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
-
-    /* User function to cast virtual address to CPU bus address */
-    unsigned int  (*port_virt_to_phys)(unsigned int addr);
-    /* User scratch pad for user specific data structures */
-    void *port_private;
-
-    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
-    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
-
-    /* Tx/Rx rings managment indexes fields. For driver use */
-
-    /* Next available Rx resource */
-    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
-    /* Returning Rx resource */
-    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
-
-    /* Next available Tx resource */
-    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
-    /* Returning Tx resource */
-    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
-    /* An extra Tx index to support transmit of multiple buffers per packet */
-    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
-
-    /* Tx/Rx rings size and base variables fields. For driver use */
-
-    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
-    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
-    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
-
-    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
-    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
-    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
-
-} ETH_PORT_INFO;
-
-
-/* ethernet.h API list */
-
-/* Port operation control routines */
-static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
-static void eth_port_reset(ETH_PORT	eth_port_num);
-static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
-
-
-/* Port MAC address routines */
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr,
-				  ETH_QUEUE queue);
-
-/* PHY and MIB routines */
-static bool ethernet_phy_reset(ETH_PORT eth_port_num);
-
-static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
-				   unsigned int phy_reg,
-				   unsigned int value);
-
-static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
-				  unsigned int phy_reg,
-				  unsigned int* value);
-
-static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
-
-/* Port data flow control routines */
-static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE tx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE tx_queue,
-					      PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE rx_queue,
-					      PKT_INFO *p_pkt_info);
-
-
-static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	tx_queue,
-				    int				tx_desc_num,
-				    int				tx_buff_size,
-				    unsigned int	tx_desc_base_addr,
-				    unsigned int	tx_buff_base_addr);
-
-static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	rx_queue,
-				    int				rx_desc_num,
-				    int				rx_buff_size,
-				    unsigned int	rx_desc_base_addr,
-				    unsigned int	rx_buff_base_addr);
-
-#endif /* MV64460_ETH_ */
diff --git a/board/Marvell/db64460/mv_regs.h b/board/Marvell/db64460/mv_regs.h
deleted file mode 100644
index fb50bb6a08..0000000000
--- a/board/Marvell/db64460/mv_regs.h
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/********************************************************************************
-* gt64460r.h - GT-64460 Internal registers definition file.
-*
-* DESCRIPTION:
-*	None.
-*
-* DEPENDENCIES:
-*	None.
-*
-*******************************************************************************/
-
-#ifndef __INCmv_regsh
-#define __INCmv_regsh
-
-#define MV64460
-
-/* Supported by the Atlantis */
-#define MV64460_INCLUDE_PCI_1
-#define MV64460_INCLUDE_PCI_0_ARBITER
-#define MV64460_INCLUDE_PCI_1_ARBITER
-#define MV64460_INCLUDE_SNOOP_SUPPORT
-#define MV64460_INCLUDE_P2P
-#define MV64460_INCLUDE_ETH_PORT_2
-#define MV64460_INCLUDE_CPU_MAPPING
-#define MV64460_INCLUDE_MPSC
-
-/* Not supported features */
-#undef	INCLUDE_CNTMR_4_7
-#undef	INCLUDE_DMA_4_7
-
-/****************************************/
-/* Processor Address Space		*/
-/****************************************/
-
-/* DDR SDRAM BAR and size registers */
-
-#define MV64460_CS_0_BASE_ADDR					    0x008
-#define MV64460_CS_0_SIZE					    0x010
-#define MV64460_CS_1_BASE_ADDR					    0x208
-#define MV64460_CS_1_SIZE					    0x210
-#define MV64460_CS_2_BASE_ADDR					    0x018
-#define MV64460_CS_2_SIZE					    0x020
-#define MV64460_CS_3_BASE_ADDR					    0x218
-#define MV64460_CS_3_SIZE					    0x220
-
-/* Devices BAR and size registers */
-
-#define MV64460_DEV_CS0_BASE_ADDR				    0x028
-#define MV64460_DEV_CS0_SIZE					    0x030
-#define MV64460_DEV_CS1_BASE_ADDR				    0x228
-#define MV64460_DEV_CS1_SIZE					    0x230
-#define MV64460_DEV_CS2_BASE_ADDR				    0x248
-#define MV64460_DEV_CS2_SIZE					    0x250
-#define MV64460_DEV_CS3_BASE_ADDR				    0x038
-#define MV64460_DEV_CS3_SIZE					    0x040
-#define MV64460_BOOTCS_BASE_ADDR				    0x238
-#define MV64460_BOOTCS_SIZE					    0x240
-
-/* PCI 0 BAR and size registers */
-
-#define MV64460_PCI_0_IO_BASE_ADDR				    0x048
-#define MV64460_PCI_0_IO_SIZE					    0x050
-#define MV64460_PCI_0_MEMORY0_BASE_ADDR				    0x058
-#define MV64460_PCI_0_MEMORY0_SIZE				    0x060
-#define MV64460_PCI_0_MEMORY1_BASE_ADDR				    0x080
-#define MV64460_PCI_0_MEMORY1_SIZE				    0x088
-#define MV64460_PCI_0_MEMORY2_BASE_ADDR				    0x258
-#define MV64460_PCI_0_MEMORY2_SIZE				    0x260
-#define MV64460_PCI_0_MEMORY3_BASE_ADDR				    0x280
-#define MV64460_PCI_0_MEMORY3_SIZE				    0x288
-
-/* PCI 1 BAR and size registers */
-#define MV64460_PCI_1_IO_BASE_ADDR				    0x090
-#define MV64460_PCI_1_IO_SIZE					    0x098
-#define MV64460_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
-#define MV64460_PCI_1_MEMORY0_SIZE				    0x0a8
-#define MV64460_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
-#define MV64460_PCI_1_MEMORY1_SIZE				    0x0b8
-#define MV64460_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
-#define MV64460_PCI_1_MEMORY2_SIZE				    0x2a8
-#define MV64460_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
-#define MV64460_PCI_1_MEMORY3_SIZE				    0x2b8
-
-/* SRAM base address */
-#define MV64460_INTEGRATED_SRAM_BASE_ADDR			    0x268
-
-/* internal registers space base address */
-#define MV64460_INTERNAL_SPACE_BASE_ADDR			    0x068
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1
-   windows above */
-#define MV64460_BASE_ADDR_ENABLE				    0x278
-
-/****************************************/
-/* PCI remap registers			*/
-/****************************************/
-      /* PCI 0 */
-#define MV64460_PCI_0_IO_ADDR_REMAP				    0x0f0
-#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
-#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
-#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
-#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
-#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
-#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
-#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
-#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
-      /* PCI 1 */
-#define MV64460_PCI_1_IO_ADDR_REMAP				    0x108
-#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
-#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
-#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
-#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
-#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
-#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
-#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
-#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
-
-#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
-#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
-#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
-#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
-#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
-#define MV64460_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
-#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
-#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
-
-/****************************************/
-/*	   CPU Control Registers	*/
-/****************************************/
-
-#define MV64460_CPU_CONFIG					    0x000
-#define MV64460_CPU_MODE					    0x120
-#define MV64460_CPU_MASTER_CONTROL				    0x160
-#define MV64460_CPU_CROSS_BAR_CONTROL_LOW			    0x150
-#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
-#define MV64460_CPU_CROSS_BAR_TIMEOUT				    0x168
-
-/****************************************/
-/* SMP RegisterS			*/
-/****************************************/
-
-#define MV64460_SMP_WHO_AM_I					    0x200
-#define MV64460_SMP_CPU0_DOORBELL				    0x214
-#define MV64460_SMP_CPU0_DOORBELL_CLEAR				    0x21C
-#define MV64460_SMP_CPU1_DOORBELL				    0x224
-#define MV64460_SMP_CPU1_DOORBELL_CLEAR				    0x22C
-#define MV64460_SMP_CPU0_DOORBELL_MASK				    0x234
-#define MV64460_SMP_CPU1_DOORBELL_MASK				    0x23C
-#define MV64460_SMP_SEMAPHOR0					    0x244
-#define MV64460_SMP_SEMAPHOR1					    0x24c
-#define MV64460_SMP_SEMAPHOR2					    0x254
-#define MV64460_SMP_SEMAPHOR3					    0x25c
-#define MV64460_SMP_SEMAPHOR4					    0x264
-#define MV64460_SMP_SEMAPHOR5					    0x26c
-#define MV64460_SMP_SEMAPHOR6					    0x274
-#define MV64460_SMP_SEMAPHOR7					    0x27c
-
-/****************************************/
-/*  CPU Sync Barrier Register		*/
-/****************************************/
-
-#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
-#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
-#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
-#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
-
-/****************************************/
-/* CPU Access Protect			*/
-/****************************************/
-
-#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
-#define MV64460_CPU_PROTECT_WINDOW_0_SIZE			    0x188
-#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
-#define MV64460_CPU_PROTECT_WINDOW_1_SIZE			    0x198
-#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
-#define MV64460_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
-#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
-#define MV64460_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
-
-
-/****************************************/
-/*	    CPU Error Report		*/
-/****************************************/
-
-#define MV64460_CPU_ERROR_ADDR_LOW				    0x070
-#define MV64460_CPU_ERROR_ADDR_HIGH				    0x078
-#define MV64460_CPU_ERROR_DATA_LOW				    0x128
-#define MV64460_CPU_ERROR_DATA_HIGH				    0x130
-#define MV64460_CPU_ERROR_PARITY				    0x138
-#define MV64460_CPU_ERROR_CAUSE					    0x140
-#define MV64460_CPU_ERROR_MASK					    0x148
-
-/****************************************/
-/*	CPU Interface Debug Registers	*/
-/****************************************/
-
-#define MV64460_PUNIT_SLAVE_DEBUG_LOW				    0x360
-#define MV64460_PUNIT_SLAVE_DEBUG_HIGH				    0x368
-#define MV64460_PUNIT_MASTER_DEBUG_LOW				    0x370
-#define MV64460_PUNIT_MASTER_DEBUG_HIGH				    0x378
-#define MV64460_PUNIT_MMASK					    0x3e4
-
-/****************************************/
-/*  Integrated SRAM Registers		*/
-/****************************************/
-
-#define MV64460_SRAM_CONFIG					    0x380
-#define MV64460_SRAM_TEST_MODE					    0X3F4
-#define MV64460_SRAM_ERROR_CAUSE				    0x388
-#define MV64460_SRAM_ERROR_ADDR					    0x390
-#define MV64460_SRAM_ERROR_ADDR_HIGH				    0X3F8
-#define MV64460_SRAM_ERROR_DATA_LOW				    0x398
-#define MV64460_SRAM_ERROR_DATA_HIGH				    0x3a0
-#define MV64460_SRAM_ERROR_DATA_PARITY				    0x3a8
-
-/****************************************/
-/* SDRAM Configuration			*/
-/****************************************/
-
-#define MV64460_SDRAM_CONFIG					    0x1400
-#define MV64460_D_UNIT_CONTROL_LOW				    0x1404
-#define MV64460_D_UNIT_CONTROL_HIGH				    0x1424
-#define MV64460_SDRAM_TIMING_CONTROL_LOW			    0x1408
-#define MV64460_SDRAM_TIMING_CONTROL_HIGH			    0x140c
-#define MV64460_SDRAM_ADDR_CONTROL				    0x1410
-#define MV64460_SDRAM_OPEN_PAGES_CONTROL			    0x1414
-#define MV64460_SDRAM_OPERATION					    0x1418
-#define MV64460_SDRAM_MODE					    0x141c
-#define MV64460_EXTENDED_DRAM_MODE				    0x1420
-#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
-#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
-#define MV64460_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
-#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
-#define MV64460_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
-
-/****************************************/
-/* SDRAM Error Report			*/
-/****************************************/
-
-#define MV64460_SDRAM_ERROR_DATA_LOW				    0x1444
-#define MV64460_SDRAM_ERROR_DATA_HIGH				    0x1440
-#define MV64460_SDRAM_ERROR_ADDR				    0x1450
-#define MV64460_SDRAM_RECEIVED_ECC				    0x1448
-#define MV64460_SDRAM_CALCULATED_ECC				    0x144c
-#define MV64460_SDRAM_ECC_CONTROL				    0x1454
-#define MV64460_SDRAM_ECC_ERROR_COUNTER				    0x1458
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-
-#define MV64460_DFCDL_CONFIG0					    0x1480
-#define MV64460_DFCDL_CONFIG1					    0x1484
-#define MV64460_DLL_WRITE					    0x1488
-#define MV64460_DLL_READ					    0x148c
-#define MV64460_SRAM_ADDR					    0x1490
-#define MV64460_SRAM_DATA0					    0x1494
-#define MV64460_SRAM_DATA1					    0x1498
-#define MV64460_SRAM_DATA2					    0x149c
-#define MV64460_DFCL_PROBE					    0x14a0
-
-/******************************************/
-/*   Debug Registers			  */
-/******************************************/
-
-#define MV64460_DUNIT_DEBUG_LOW					    0x1460
-#define MV64460_DUNIT_DEBUG_HIGH				    0x1464
-#define MV64460_DUNIT_MMASK					    0X1b40
-
-/****************************************/
-/* Device Parameters			*/
-/****************************************/
-
-#define MV64460_DEVICE_BANK0_PARAMETERS				    0x45c
-#define MV64460_DEVICE_BANK1_PARAMETERS				    0x460
-#define MV64460_DEVICE_BANK2_PARAMETERS				    0x464
-#define MV64460_DEVICE_BANK3_PARAMETERS				    0x468
-#define MV64460_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
-#define MV64460_DEVICE_INTERFACE_CONTROL			    0x4c0
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
-
-/****************************************/
-/* Device interrupt registers		*/
-/****************************************/
-
-#define MV64460_DEVICE_INTERRUPT_CAUSE				    0x4d0
-#define MV64460_DEVICE_INTERRUPT_MASK				    0x4d4
-#define MV64460_DEVICE_ERROR_ADDR				    0x4d8
-#define MV64460_DEVICE_ERROR_DATA				    0x4dc
-#define MV64460_DEVICE_ERROR_PARITY				    0x4e0
-
-/****************************************/
-/* Device debug registers		*/
-/****************************************/
-
-#define MV64460_DEVICE_DEBUG_LOW				    0x4e4
-#define MV64460_DEVICE_DEBUG_HIGH				    0x4e8
-#define MV64460_RUNIT_MMASK					    0x4f0
-
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-
-#define MV64460_PCI_0_CS_0_BANK_SIZE				    0xc08
-#define MV64460_PCI_1_CS_0_BANK_SIZE				    0xc88
-#define MV64460_PCI_0_CS_1_BANK_SIZE				    0xd08
-#define MV64460_PCI_1_CS_1_BANK_SIZE				    0xd88
-#define MV64460_PCI_0_CS_2_BANK_SIZE				    0xc0c
-#define MV64460_PCI_1_CS_2_BANK_SIZE				    0xc8c
-#define MV64460_PCI_0_CS_3_BANK_SIZE				    0xd0c
-#define MV64460_PCI_1_CS_3_BANK_SIZE				    0xd8c
-#define MV64460_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
-#define MV64460_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
-#define MV64460_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
-#define MV64460_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
-#define MV64460_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
-#define MV64460_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
-#define MV64460_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
-#define MV64460_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
-#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
-#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
-#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
-#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
-#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
-#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
-#define MV64460_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
-#define MV64460_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
-#define MV64460_PCI_0_CPU_BAR_SIZE				    0xd28
-#define MV64460_PCI_1_CPU_BAR_SIZE				    0xda8
-#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
-#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
-#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
-#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
-#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
-#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
-#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
-#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
-#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
-#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
-#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
-#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
-#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
-#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
-#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
-#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
-#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
-#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
-#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
-#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
-#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
-#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
-#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
-#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
-#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
-#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
-#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
-#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
-#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
-#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
-#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
-#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
-#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
-#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
-#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
-#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
-#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
-#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
-#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
-#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
-#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
-#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
-#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
-#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
-#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
-#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
-#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
-#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
-#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
-#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
-#define MV64460_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
-#define MV64460_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
-#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
-#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
-#define MV64460_PCI_0_HEADERS_RETARGET_BASE			    0xF44
-#define MV64460_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
-#define MV64460_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
-#define MV64460_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
-
-/***********************************/
-/*   PCI Control Register Map	   */
-/***********************************/
-
-#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
-#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
-#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
-#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
-#define MV64460_PCI_0_COMMAND					    0xc00
-#define MV64460_PCI_1_COMMAND					    0xc80
-#define MV64460_PCI_0_MODE					    0xd00
-#define MV64460_PCI_1_MODE					    0xd80
-#define MV64460_PCI_0_RETRY					    0xc04
-#define MV64460_PCI_1_RETRY					    0xc84
-#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
-#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
-#define MV64460_PCI_0_MSI_TRIGGER_TIMER				    0xc38
-#define MV64460_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
-#define MV64460_PCI_0_ARBITER_CONTROL				    0x1d00
-#define MV64460_PCI_1_ARBITER_CONTROL				    0x1d80
-#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
-#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
-#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
-#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
-#define MV64460_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
-#define MV64460_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
-#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
-#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
-#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
-#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
-#define MV64460_PCI_0_P2P_CONFIG				    0x1d14
-#define MV64460_PCI_1_P2P_CONFIG				    0x1d94
-
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
-
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define MV64460_PCI_0_CONFIG_ADDR				    0xcf8
-#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
-#define MV64460_PCI_1_CONFIG_ADDR				    0xc78
-#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
-#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
-#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers		*/
-/****************************************/
-
-#define MV64460_PCI_0_SERR_MASK					    0xc28
-#define MV64460_PCI_1_SERR_MASK					    0xca8
-#define MV64460_PCI_0_ERROR_ADDR_LOW				    0x1d40
-#define MV64460_PCI_1_ERROR_ADDR_LOW				    0x1dc0
-#define MV64460_PCI_0_ERROR_ADDR_HIGH				    0x1d44
-#define MV64460_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
-#define MV64460_PCI_0_ERROR_ATTRIBUTE				    0x1d48
-#define MV64460_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
-#define MV64460_PCI_0_ERROR_COMMAND				    0x1d50
-#define MV64460_PCI_1_ERROR_COMMAND				    0x1dd0
-#define MV64460_PCI_0_ERROR_CAUSE				    0x1d58
-#define MV64460_PCI_1_ERROR_CAUSE				    0x1dd8
-#define MV64460_PCI_0_ERROR_MASK				    0x1d5c
-#define MV64460_PCI_1_ERROR_MASK				    0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers		*/
-/****************************************/
-
-#define MV64460_PCI_0_MMASK					    0X1D24
-#define MV64460_PCI_1_MMASK					    0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define MV64460_PCI_DEVICE_AND_VENDOR_ID			    0x000
-#define MV64460_PCI_STATUS_AND_COMMAND				    0x004
-#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
-#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
-
-#define MV64460_PCI_SCS_0_BASE_ADDR_LOW				    0x010
-#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
-#define MV64460_PCI_SCS_1_BASE_ADDR_LOW				    0x018
-#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
-#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
-#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
-#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
-#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
-#define MV64460_PCI_CAPABILTY_LIST_POINTER			    0x034
-#define MV64460_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
-       /* capability list */
-#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
-#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
-#define MV64460_PCI_VPD_ADDR					    0x048
-#define MV64460_PCI_VPD_DATA					    0x04c
-#define MV64460_PCI_MSI_MESSAGE_CONTROL				    0x050
-#define MV64460_PCI_MSI_MESSAGE_ADDR				    0x054
-#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
-#define MV64460_PCI_MSI_MESSAGE_DATA				    0x05c
-#define MV64460_PCI_X_COMMAND					    0x060
-#define MV64460_PCI_X_STATUS					    0x064
-#define MV64460_PCI_COMPACT_PCI_HOT_SWAP			    0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define MV64460_PCI_SCS_2_BASE_ADDR_LOW				    0x110
-#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
-#define MV64460_PCI_SCS_3_BASE_ADDR_LOW				    0x118
-#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
-#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
-#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
-#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
-#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
-#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
-#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
-#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
-#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
-#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
-#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
-#define MV64460_PCI_CPU_BASE_ADDR_LOW				    0x220
-#define MV64460_PCI_CPU_BASE_ADDR_HIGH				    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
-#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
-#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
-#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
-#define MV64460_PCI_P2P_I_O_BASE_ADDR				    0x420
-#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
-
-/****************************************/
-/* Messaging Unit Registers (I20)	*/
-/****************************************/
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
-#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
-#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
-#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
-#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define MV64460_ETH_PHY_ADDR_REG				    0x2000
-#define MV64460_ETH_SMI_REG					    0x2004
-#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
-#define MV64460_ETH_UNIT_DEFAULTID_REG				    0x200c
-#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
-#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
-#define MV64460_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
-#define MV64460_ETH_UNIT_ERROR_ADDR_REG				    0x2094
-#define MV64460_ETH_BAR_0					    0x2200
-#define MV64460_ETH_BAR_1					    0x2208
-#define MV64460_ETH_BAR_2					    0x2210
-#define MV64460_ETH_BAR_3					    0x2218
-#define MV64460_ETH_BAR_4					    0x2220
-#define MV64460_ETH_BAR_5					    0x2228
-#define MV64460_ETH_SIZE_REG_0					    0x2204
-#define MV64460_ETH_SIZE_REG_1					    0x220c
-#define MV64460_ETH_SIZE_REG_2					    0x2214
-#define MV64460_ETH_SIZE_REG_3					    0x221c
-#define MV64460_ETH_SIZE_REG_4					    0x2224
-#define MV64460_ETH_SIZE_REG_5					    0x222c
-#define MV64460_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
-#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
-#define MV64460_ETH_BASE_ADDR_ENABLE_REG			    0x2290
-#define MV64460_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
-#define MV64460_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
-#define MV64460_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
-#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
-#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
-#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
-#define MV64460_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
-#define MV64460_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
-#define MV64460_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
-#define MV64460_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
-#define MV64460_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
-#define MV64460_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
-#define MV64460_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
-#define MV64460_ETH_DSCP_3(port)				   (0x242c + (port<<10))
-#define MV64460_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
-#define MV64460_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
-#define MV64460_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
-#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
-#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
-#define MV64460_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
-#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
-#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
-#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
-#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
-#define MV64460_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
-#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
-#define MV64460_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
-#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
-#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
-#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
-#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
-#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
-#define MV64460_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
-#define MV64460_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
-#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
-#define MV64460_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
-#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
-#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
-#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
-#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
-#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
-#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
-
-/*******************************************/
-/*	    CUNIT  Registers		   */
-/*******************************************/
-
-	 /* Address Decoding Register Map */
-
-#define MV64460_CUNIT_BASE_ADDR_REG0				    0xf200
-#define MV64460_CUNIT_BASE_ADDR_REG1				    0xf208
-#define MV64460_CUNIT_BASE_ADDR_REG2				    0xf210
-#define MV64460_CUNIT_BASE_ADDR_REG3				    0xf218
-#define MV64460_CUNIT_SIZE0					    0xf204
-#define MV64460_CUNIT_SIZE1					    0xf20c
-#define MV64460_CUNIT_SIZE2					    0xf214
-#define MV64460_CUNIT_SIZE3					    0xf21c
-#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
-#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
-#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
-#define MV64460_MPSC0_ACCESS_PROTECTION_REG			    0xf254
-#define MV64460_MPSC1_ACCESS_PROTECTION_REG			    0xf258
-#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
-
-	/*  Error Report Registers  */
-
-#define MV64460_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
-#define MV64460_CUNIT_INTERRUPT_MASK_REG			    0xf314
-#define MV64460_CUNIT_ERROR_ADDR				    0xf318
-
-	/*  Cunit Control Registers */
-
-#define MV64460_CUNIT_ARBITER_CONTROL_REG			    0xf300
-#define MV64460_CUNIT_CONFIG_REG				    0xb40c
-#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
-
-	/*  Cunit Debug Registers   */
-
-#define MV64460_CUNIT_DEBUG_LOW					    0xf340
-#define MV64460_CUNIT_DEBUG_HIGH				    0xf344
-#define MV64460_CUNIT_MMASK					    0xf380
-
-	/*  Cunit Base Address Enable Window Bits*/
-#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
-#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
-#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
-#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
-
-	/*  MPSCs Clocks Routing Registers  */
-
-#define MV64460_MPSC_ROUTING_REG				    0xb400
-#define MV64460_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
-#define MV64460_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
-
-	/*  MPSCs Interrupts Registers	  */
-
-#define MV64460_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
-#define MV64460_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
-
-#define MV64460_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
-#define MV64460_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
-#define MV64460_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
-
-	/*  MPSC0 Registers	 */
-
-
-/***************************************/
-/*	    SDMA Registers	       */
-/***************************************/
-
-#define MV64460_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
-#define MV64460_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
-#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
-#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
-#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
-
-#define MV64460_SDMA_CAUSE_REG					    0xb800
-#define MV64460_SDMA_MASK_REG					    0xb880
-
-
-/****************************************/
-/* SDMA Address Space Targets		*/
-/****************************************/
-
-#define MV64460_SDMA_DRAM_CS_0_TARGET				    0x0e00
-#define MV64460_SDMA_DRAM_CS_1_TARGET				    0x0d00
-#define MV64460_SDMA_DRAM_CS_2_TARGET				    0x0b00
-#define MV64460_SDMA_DRAM_CS_3_TARGET				    0x0700
-
-#define MV64460_SDMA_DEV_CS_0_TARGET				    0x1e01
-#define MV64460_SDMA_DEV_CS_1_TARGET				    0x1d01
-#define MV64460_SDMA_DEV_CS_2_TARGET				    0x1b01
-#define MV64460_SDMA_DEV_CS_3_TARGET				    0x1701
-
-#define MV64460_SDMA_BOOT_CS_TARGET				    0x0f00
-
-#define MV64460_SDMA_SRAM_TARGET				    0x0003
-#define MV64460_SDMA_60X_BUS_TARGET				    0x4003
-
-#define MV64460_PCI_0_TARGET					    0x0003
-#define MV64460_PCI_1_TARGET					    0x0004
-
-
-/* Devices BAR and size registers */
-
-#define MV64460_DEV_CS0_BASE_ADDR				    0x028
-#define MV64460_DEV_CS0_SIZE					    0x030
-#define MV64460_DEV_CS1_BASE_ADDR				    0x228
-#define MV64460_DEV_CS1_SIZE					    0x230
-#define MV64460_DEV_CS2_BASE_ADDR				    0x248
-#define MV64460_DEV_CS2_SIZE					    0x250
-#define MV64460_DEV_CS3_BASE_ADDR				    0x038
-#define MV64460_DEV_CS3_SIZE					    0x040
-#define MV64460_BOOTCS_BASE_ADDR				    0x238
-#define MV64460_BOOTCS_SIZE					    0x240
-
-/* SDMA Window access protection */
-#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0
-#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1
-#define MV64460_SDMA_WIN_ACCESS_FULL 2
-
-/* BRG Interrupts */
-
-#define MV64460_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
-#define MV64460_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
-#define MV64460_BRG_CAUSE_REG					    0xb834
-#define MV64460_BRG_MASK_REG					    0xb8b4
-
-/****************************************/
-/* DMA Channel Control			*/
-/****************************************/
-
-#define MV64460_DMA_CHANNEL0_CONTROL				    0x840
-#define MV64460_DMA_CHANNEL0_CONTROL_HIGH			    0x880
-#define MV64460_DMA_CHANNEL1_CONTROL				    0x844
-#define MV64460_DMA_CHANNEL1_CONTROL_HIGH			    0x884
-#define MV64460_DMA_CHANNEL2_CONTROL				    0x848
-#define MV64460_DMA_CHANNEL2_CONTROL_HIGH			    0x888
-#define MV64460_DMA_CHANNEL3_CONTROL				    0x84C
-#define MV64460_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
-
-
-/****************************************/
-/*	     IDMA Registers		*/
-/****************************************/
-
-#define MV64460_DMA_CHANNEL0_BYTE_COUNT				    0x800
-#define MV64460_DMA_CHANNEL1_BYTE_COUNT				    0x804
-#define MV64460_DMA_CHANNEL2_BYTE_COUNT				    0x808
-#define MV64460_DMA_CHANNEL3_BYTE_COUNT				    0x80C
-#define MV64460_DMA_CHANNEL0_SOURCE_ADDR			    0x810
-#define MV64460_DMA_CHANNEL1_SOURCE_ADDR			    0x814
-#define MV64460_DMA_CHANNEL2_SOURCE_ADDR			    0x818
-#define MV64460_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
-#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
-#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
-#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
-#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
-#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
-#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
-#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
-#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
-#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
-#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
-#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
-#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
-
- /*  IDMA Address Decoding Base Address Registers  */
-
-#define MV64460_DMA_BASE_ADDR_REG0				    0xa00
-#define MV64460_DMA_BASE_ADDR_REG1				    0xa08
-#define MV64460_DMA_BASE_ADDR_REG2				    0xa10
-#define MV64460_DMA_BASE_ADDR_REG3				    0xa18
-#define MV64460_DMA_BASE_ADDR_REG4				    0xa20
-#define MV64460_DMA_BASE_ADDR_REG5				    0xa28
-#define MV64460_DMA_BASE_ADDR_REG6				    0xa30
-#define MV64460_DMA_BASE_ADDR_REG7				    0xa38
-
- /*  IDMA Address Decoding Size Address Register   */
-
-#define MV64460_DMA_SIZE_REG0					    0xa04
-#define MV64460_DMA_SIZE_REG1					    0xa0c
-#define MV64460_DMA_SIZE_REG2					    0xa14
-#define MV64460_DMA_SIZE_REG3					    0xa1c
-#define MV64460_DMA_SIZE_REG4					    0xa24
-#define MV64460_DMA_SIZE_REG5					    0xa2c
-#define MV64460_DMA_SIZE_REG6					    0xa34
-#define MV64460_DMA_SIZE_REG7					    0xa3C
-
- /* IDMA Address Decoding High Address Remap and Access
-		  Protection Registers			  */
-
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
-#define MV64460_DMA_BASE_ADDR_ENABLE_REG			    0xa80
-#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
-#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
-#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
-#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
-#define MV64460_DMA_ARBITER_CONTROL				    0x860
-#define MV64460_DMA_CROSS_BAR_TIMEOUT				    0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
-#define MV64460_DMA_HEADERS_RETARGET_CONTROL			    0xa84
-#define MV64460_DMA_HEADERS_RETARGET_BASE			    0xa88
-
- /*  IDMA Interrupt Register  */
-
-#define MV64460_DMA_INTERRUPT_CAUSE_REG				    0x8c0
-#define MV64460_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
-#define MV64460_DMA_ERROR_ADDR					    0x8c8
-#define MV64460_DMA_ERROR_SELECT				    0x8cc
-
- /*  IDMA Debug Register ( for internal use )	 */
-
-#define MV64460_DMA_DEBUG_LOW					    0x8e0
-#define MV64460_DMA_DEBUG_HIGH					    0x8e4
-#define MV64460_DMA_SPARE					    0xA8C
-
-/****************************************/
-/* Timer_Counter			*/
-/****************************************/
-
-#define MV64460_TIMER_COUNTER0					    0x850
-#define MV64460_TIMER_COUNTER1					    0x854
-#define MV64460_TIMER_COUNTER2					    0x858
-#define MV64460_TIMER_COUNTER3					    0x85C
-#define MV64460_TIMER_COUNTER_0_3_CONTROL			    0x864
-#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
-#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
-
-/****************************************/
-/*	   Watchdog registers		*/
-/****************************************/
-
-#define MV64460_WATCHDOG_CONFIG_REG				    0xb410
-#define MV64460_WATCHDOG_VALUE_REG				    0xb414
-
-/****************************************/
-/* I2C Registers			*/
-/****************************************/
-
-#define MV64460_I2C_SLAVE_ADDR					    0xc000
-#define MV64460_I2C_EXTENDED_SLAVE_ADDR				    0xc010
-#define MV64460_I2C_DATA					    0xc004
-#define MV64460_I2C_CONTROL					    0xc008
-#define MV64460_I2C_STATUS_BAUDE_RATE				    0xc00C
-#define MV64460_I2C_SOFT_RESET					    0xc01c
-
-/****************************************/
-/* GPP Interface Registers		*/
-/****************************************/
-
-#define MV64460_GPP_IO_CONTROL					    0xf100
-#define MV64460_GPP_LEVEL_CONTROL				    0xf110
-#define MV64460_GPP_VALUE					    0xf104
-#define MV64460_GPP_INTERRUPT_CAUSE				    0xf108
-#define MV64460_GPP_INTERRUPT_MASK0				    0xf10c
-#define MV64460_GPP_INTERRUPT_MASK1				    0xf114
-#define MV64460_GPP_VALUE_SET					    0xf118
-#define MV64460_GPP_VALUE_CLEAR					    0xf11c
-
-/****************************************/
-/* Interrupt Controller Registers	*/
-/****************************************/
-
-/****************************************/
-/* Interrupts				*/
-/****************************************/
-
-#define MV64460_MAIN_INTERRUPT_CAUSE_LOW			    0x004
-#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
-#define MV64460_CPU_INTERRUPT0_MASK_LOW				    0x014
-#define MV64460_CPU_INTERRUPT0_MASK_HIGH			    0x01c
-#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
-#define MV64460_CPU_INTERRUPT1_MASK_LOW				    0x034
-#define MV64460_CPU_INTERRUPT1_MASK_HIGH			    0x03c
-#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
-#define MV64460_INTERRUPT0_MASK_0_LOW				    0x054
-#define MV64460_INTERRUPT0_MASK_0_HIGH				    0x05c
-#define MV64460_INTERRUPT0_SELECT_CAUSE				    0x064
-#define MV64460_INTERRUPT1_MASK_0_LOW				    0x074
-#define MV64460_INTERRUPT1_MASK_0_HIGH				    0x07c
-#define MV64460_INTERRUPT1_SELECT_CAUSE				    0x084
-
-/****************************************/
-/*	MPP Interface Registers		*/
-/****************************************/
-
-#define MV64460_MPP_CONTROL0					    0xf000
-#define MV64460_MPP_CONTROL1					    0xf004
-#define MV64460_MPP_CONTROL2					    0xf008
-#define MV64460_MPP_CONTROL3					    0xf00c
-
-/****************************************/
-/*    Serial Initialization registers	*/
-/****************************************/
-
-#define MV64460_SERIAL_INIT_LAST_DATA				    0xf324
-#define MV64460_SERIAL_INIT_CONTROL				    0xf328
-#define MV64460_SERIAL_INIT_STATUS				    0xf32c
-
-
-#endif /* __INCgt64460rh */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
deleted file mode 100644
index 32172a2070..0000000000
--- a/board/Marvell/db64460/pci.c
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/* PCI.c - PCI functions */
-
-
-#include <common.h>
-#include <pci.h>
-
-#include "../include/pci.h"
-
-#undef DEBUG
-#undef IDE_SET_NATIVE_MODE
-static unsigned int local_buses[] = { 0, 0 };
-
-static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
-	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-};
-
-
-#ifdef DEBUG
-static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
-static void gt_pci_bus_mode_display (PCI_HOST host)
-{
-	unsigned int mode;
-
-
-	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
-	switch (mode) {
-	case 0:
-		printf ("PCI %d bus mode: Conventional PCI\n", host);
-		break;
-	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
-		break;
-	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
-		break;
-	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
-		break;
-	default:
-		printf ("Unknown BUS %d\n", mode);
-	}
-}
-#endif
-
-static const unsigned int pci_p2p_configuration_reg[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static const unsigned int pci_configuration_address[] = {
-	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
-};
-
-static const unsigned int pci_configuration_data[] = {
-	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
-	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
-};
-
-static const unsigned int pci_error_cause_reg[] = {
-	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
-};
-
-static const unsigned int pci_arbiter_control[] = {
-	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
-};
-
-static const unsigned int pci_address_space_en[] = {
-	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
-};
-
-static const unsigned int pci_snoop_control_base_0_low[] = {
-	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_snoop_control_top_0[] = {
-	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
-};
-
-static const unsigned int pci_access_control_base_0_low[] = {
-	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_access_control_top_0[] = {
-	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
-};
-
-static const unsigned int pci_scs_bank_size[2][4] = {
-	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
-	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
-	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
-	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
-};
-
-static const unsigned int pci_p2p_configuration[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-
-/********************************************************************
-* pciWriteConfigReg - Write to a PCI configuration register
-*                    - Make sure the GT is configured as a master before writing
-*                      to another device on the PCI.
-*                    - The function takes care of Big/Little endian conversion.
-*
-*
-* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
-*                   (or any other PCI device spec)
-*           pciDevNum: The device number needs to be addressed.
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
-			unsigned int pciDevNum, unsigned int data)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-	unsigned int addr;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &addr);
-	if (addr != DataForAddrReg)
-		return;
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-/********************************************************************
-* pciReadConfigReg  - Read from a PCI0 configuration register
-*                    - Make sure the GT is configured as a master before reading
-*                     from another device on the PCI.
-*                   - The function takes care of Big/Little endian conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec)
-*           pciDevNum: The device number needs to be addressed.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
-			       unsigned int pciDevNum)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int data;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return 0xffffffff;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &data);
-	if (data != DataForAddrReg)
-		return 0xffffffff;
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-/********************************************************************
-* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-*                               the agent is placed on another Bus. For more
-*                               information read P2P in the PCI spec.
-*
-* Inputs:   unsigned int regOffset - The register offset as it apears in the
-*           GT spec (or any other PCI device spec).
-*           unsigned int pciDevNum - The device number needs to be addressed.
-*           unsigned int busNum - On which bus does the Target agent connect
-*                                 to.
-*           unsigned int data - data to be written.
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
-*   PCI spec referring to P2P.
-*
-*********************************************************************/
-void pciOverBridgeWriteConfigReg (PCI_HOST host,
-				  unsigned int regOffset,
-				  unsigned int pciDevNum,
-				  unsigned int busNum, unsigned int data)
-{
-	unsigned int DataForReg;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
-	} else {
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT31 | BIT0;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-
-/********************************************************************
-* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
-*                               the agent target locate on another PCI bus.
-*                             - Make sure the GT is configured as a master
-*                               before reading from another device on the PCI.
-*                             - The function takes care of Big/Little endian
-*                               conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec). (configuration register offset.)
-*           pciDevNum: The device number needs to be addressed.
-*           busNum: the Bus number where the agent is place.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
-*
-*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
-					 unsigned int regOffset,
-					 unsigned int pciDevNum,
-					 unsigned int busNum)
-{
-	unsigned int DataForReg;
-	unsigned int data;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
-	} else {		/* agent on another bus */
-
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT0 | BIT31;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-
-/********************************************************************
-* pciGetRegOffset - Gets the register offset for this region config.
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI register base address
-*********************************************************************/
-static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	}
-	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-}
-
-static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_ADDRESS_REMAP;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_ADDRESS_REMAP;
-		}
-	}
-	return PCI_0MEMORY0_ADDRESS_REMAP;
-}
-
-/********************************************************************
-* pciGetBaseAddress - Gets the base address of a PCI.
-*           - If the PCI size is 0 then this base address has no meaning!!!
-*
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI base address.
-*********************************************************************/
-unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int regBase;
-	unsigned int regEnd;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &regBase);
-	GT_REG_READ (regOffset + 8, &regEnd);
-
-	if (regEnd <= regBase)
-		return 0xffffffff;	/* ERROR !!! */
-
-	regBase = regBase << 16;
-	return regBase;
-}
-
-bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
-		  unsigned int bankBase, unsigned int bankLength)
-{
-	unsigned int low = 0xfff;
-	unsigned int high = 0x0;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-	unsigned int remapOffset = pciGetRemapOffset (host, region);
-
-	if (bankLength != 0) {
-		low = (bankBase >> 16) & 0xffff;
-		high = ((bankBase + bankLength) >> 16) - 1;
-	}
-
-	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
-	GT_REG_WRITE (regOffset + 8, high);
-
-	if (bankLength != 0) {	/* must do AFTER writing maps */
-		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
-								   dont support upper 32
-								   in this driver */
-	}
-	return true;
-}
-
-unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	return (low & 0xffff) << 16;
-}
-
-unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low, high;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	GT_REG_READ (regOffset + 8, &high);
-	return ((high & 0xffff) + 1) << 16;
-}
-
-
-/* ronen - 7/Dec/03*/
-/********************************************************************
-* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
-* Inputs: one of the PCI BAR
-*********************************************************************/
-void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-/********************************************************************
-* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
-*
-* Inputs: base and size of PCI SCS
-*********************************************************************/
-void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
-		       unsigned int pciDramBase, unsigned int pciDramSize)
-{
-	/*ronen different function for 3rd bank. */
-	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
-
-	pciDramBase = pciDramBase & 0xfffff000;
-	pciDramBase = pciDramBase | (pciReadConfigReg (host,
-						       PCI_SCS_0_BASE_ADDRESS
-						       + offset,
-						       SELF) & 0x00000fff);
-	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
-			   pciDramBase);
-	if (pciDramSize == 0)
-		pciDramSize++;
-	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
-	gtPciEnableInternalBAR (host, bank);
-}
-
-/********************************************************************
-* pciSetRegionFeatures - This function modifys one of the 8 regions with
-*                         feature bits given as an input.
-*                       - Be advised to check the spec before modifying them.
-* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-*         unsigned int features - See file: pci.h there are defintion for those
-*                                 region features.
-*         unsigned int baseAddress - The region base Address.
-*         unsigned int topAddress - The region top Address.
-* Returns: false if one of the parameters is erroneous true otherwise.
-*********************************************************************/
-bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
-			   unsigned int features, unsigned int baseAddress,
-			   unsigned int regionLength)
-{
-	unsigned int accessLow;
-	unsigned int accessHigh;
-	unsigned int accessTop = baseAddress + regionLength;
-
-	if (regionLength == 0) {	/* close the region. */
-		pciDisableAccessRegion (host, region);
-		return true;
-	}
-	/* base Address is store is bits [11:0] */
-	accessLow = (baseAddress & 0xfff00000) >> 20;
-	/* All the features are update according to the defines in pci.h (to be on
-	   the safe side we disable bits: [11:0] */
-	accessLow = accessLow | (features & 0xfffff000);
-	/* write to the Low Access Region register */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      accessLow);
-
-	accessHigh = (accessTop & 0xfff00000) >> 20;
-
-	/* write to the High Access Region register */
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
-		      accessHigh - 1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableAccessRegion - Disable The given Region by writing MAX size
-*                           to its low Address and MIN size to its high Address.
-*
-* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
-* Returns:  N/A.
-*********************************************************************/
-void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
-{
-	/* writing back the registers default values. */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      0x01001fff);
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
-}
-
-/********************************************************************
-* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciArbiterEnable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
-	return true;
-}
-
-/********************************************************************
-* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true
-*********************************************************************/
-bool pciArbiterDisable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
-	return true;
-}
-
-/********************************************************************
-* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
-*
-* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
-*           PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
-*           PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
-*           PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
-*           PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
-*           PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
-*           PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
-		(externalAgent1 << 9) + (externalAgent2 << 10) +
-		(externalAgent3 << 11) + (externalAgent4 << 12) +
-		(externalAgent5 << 13);
-	regData = (regData & 0xffffc07f) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
-	return true;
-}
-
-/********************************************************************
-* pciParkingDisable - Park on last option disable, with this function you can
-*                      disable the park on last mechanism for each agent.
-*                      disabling this option for all agents results parking
-*                      on the internal master.
-*
-* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
-*         PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-*         PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-*         PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-*         PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-*         PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-*         PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
-			PCI_AGENT_PARK externalAgent0,
-			PCI_AGENT_PARK externalAgent1,
-			PCI_AGENT_PARK externalAgent2,
-			PCI_AGENT_PARK externalAgent3,
-			PCI_AGENT_PARK externalAgent4,
-			PCI_AGENT_PARK externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
-		(externalAgent1 << 16) + (externalAgent2 << 17) +
-		(externalAgent3 << 18) + (externalAgent4 << 19) +
-		(externalAgent5 << 20);
-	regData = (regData & ~(0x7f << 14)) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
-*                       respond to grant assertion within a window specified in
-*                       the input value: 'brokenValue'.
-*
-* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
-*                       grant without asserting frame.
-* Returns:  Error for illegal broken value otherwise true.
-*********************************************************************/
-bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
-{
-	unsigned int data;
-	unsigned int regData;
-
-	if (brokenValue > 0xf)
-		return false;	/* brokenValue must be 4 bit */
-	data = brokenValue << 3;
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = (regData & 0xffffff87) | data;
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableBrokenAgentDetection - This function disable the Broken agent
-*                           Detection mechanism.
-*                           NOTE: This operation may cause a dead lock on the
-*                           pci0 arbitration.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciDisableBrokenAgentDetection (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = regData & 0xfffffffd;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciP2PConfig - This function set the PCI_n P2P configurate.
-*                 For more information on the P2P read PCI spec.
-*
-* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
-*                                      Boundry.
-*          unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
-*                                      Boundry.
-*          unsigned int busNum - The CPI bus number to which the PCI interface
-*                                      is connected.
-*          unsigned int devNum - The PCI interface's device number.
-*
-* Returns:  true.
-*********************************************************************/
-bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
-		   unsigned int SecondBusHigh,
-		   unsigned int busNum, unsigned int devNum)
-{
-	unsigned int regData;
-
-	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
-		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
-	GT_REG_WRITE (pci_p2p_configuration[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-*                          supports Cache Coherency in the PCI_n interface.
-* Inputs: region - One of the four regions.
-*         snoopType - There is four optional Types:
-*                        1. No Snoop.
-*                        2. Snoop to WT region.
-*                        3. Snoop to WB region.
-*                        4. Snoop & Invalidate to WB region.
-*         baseAddress - Base Address of this region.
-*         regionLength - Region length.
-* Returns: false if one of the parameters is wrong otherwise return true.
-*********************************************************************/
-bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
-			    PCI_SNOOP_TYPE snoopType,
-			    unsigned int baseAddress,
-			    unsigned int regionLength)
-{
-	unsigned int snoopXbaseAddress;
-	unsigned int snoopXtopAddress;
-	unsigned int data;
-	unsigned int snoopHigh = baseAddress + regionLength;
-
-	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
-		return false;
-	snoopXbaseAddress =
-		pci_snoop_control_base_0_low[host] + 0x10 * region;
-	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
-	if (regionLength == 0) {	/* closing the region */
-		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
-		GT_REG_WRITE (snoopXtopAddress, 0);
-		return true;
-	}
-	baseAddress = baseAddress & 0xfff00000;	/* Granularity of 1MByte */
-	data = (baseAddress >> 20) | snoopType << 12;
-	GT_REG_WRITE (snoopXbaseAddress, data);
-	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
-	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
-	return true;
-}
-
-static int gt_read_config_dword (struct pci_controller *hose,
-				 pci_dev_t dev, int offset, u32 * value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-					   PCI_DEV (dev));
-	} else {
-		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
-						     cfg_addr, offset,
-						     PCI_DEV (dev), bus);
-	}
-
-	return 0;
-}
-
-static int gt_write_config_dword (struct pci_controller *hose,
-				  pci_dev_t dev, int offset, u32 value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-				   PCI_DEV (dev), value);
-	} else {
-		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
-					     offset, PCI_DEV (dev), bus,
-					     value);
-	}
-	return 0;
-}
-
-
-static void gt_setup_ide (struct pci_controller *hose,
-			  pci_dev_t dev, struct pci_config_table *entry)
-{
-	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
-	u32 bar_response, bar_value;
-	int bar;
-
-	for (bar = 0; bar < 6; bar++) {
-		/*ronen different function for 3rd bank. */
-		unsigned int offset =
-			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
-
-		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
-					0x0);
-		pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
-				       &bar_response);
-
-		pciauto_region_allocate (bar_response &
-					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
-					 pci_io : hose->pci_mem, ide_bar[bar],
-					 &bar_value);
-
-		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
-					bar_value);
-	}
-}
-
-
-/* TODO BJW: Change this for DB64360. This was pulled from the EV64260  */
-/* and is curently not called *. */
-
-struct pci_config_table gt_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-
-	{}
-};
-
-struct pci_controller pci0_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-struct pci_controller pci1_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-void pci_init_board (void)
-{
-	unsigned int command;
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST0);
-#endif
-
-	pci0_hose.first_busno = 0;
-	pci0_hose.last_busno = 0xff;
-	local_buses[0] = pci0_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci0_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-	pci0_hose.region_count = 2;
-
-	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
-
-	pci_register_hose (&pci0_hose);
-	pciArbiterEnable (PCI_HOST0);
-	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
-	pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST1);
-#endif
-	pci1_hose.first_busno = pci0_hose.last_busno + 1;
-	pci1_hose.last_busno = 0xff;
-	pci1_hose.current_busno = pci1_hose.first_busno;
-	local_buses[1] = pci1_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci1_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-
-	pci1_hose.region_count = 2;
-
-	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
-
-	pci_register_hose (&pci1_hose);
-
-	pciArbiterEnable (PCI_HOST1);
-	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-	pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-}
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
deleted file mode 100644
index 176220232e..0000000000
--- a/board/Marvell/db64460/sdram_init.c
+++ /dev/null
@@ -1,1985 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64460 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
-  ************************************************************************/
-
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../include/memory.h"
-#include "../include/pci.h"
-#include "../include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../common/i2c.h"
-#include "64460.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	DEBUG
-#define	MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-int set_dfcdlInit (void);	/* setup delay line of Mv64460 */
-int mvDmaIsChannelActive (int);
-int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
-int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
-
-/* ------------------------------------------------------------------------- */
-
-int
-memory_map_bank (unsigned int bankNo,
-		 unsigned int bankBase, unsigned int bankLength)
-{
-#ifdef MAP_PCI
-	PCI_HOST host;
-#endif
-
-
-#ifdef DEBUG
-	if (bankLength > 0) {
-		printf ("mapping bank %d at %08x - %08x\n",
-			bankNo, bankBase, bankBase + bankLength - 1);
-	} else {
-		printf ("unmapping bank %d\n", bankNo);
-	}
-#endif
-
-	memoryMapBank (bankNo, bankBase, bankLength);
-
-#ifdef MAP_PCI
-	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
-		const int features =
-			PREFETCH_ENABLE |
-			DELAYED_READ_ENABLE |
-			AGGRESSIVE_PREFETCH |
-			READ_LINE_AGGRESSIVE_PREFETCH |
-			READ_MULTI_AGGRESSIVE_PREFETCH |
-			MAX_BURST_4 | PCI_NO_SWAP;
-
-		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
-		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
-				       bankLength);
-
-		pciSetRegionFeatures (host, bankNo, features, bankBase,
-				      bankLength);
-	}
-#endif
-	return 0;
-}
-
-#define GB         (1 << 30)
-
-/* much of this code is based on (or is) the code in the pip405 port */
-/* thanks go to the authors of said port - Josh */
-
-/* structure to store the relevant information about an sdram bank */
-typedef struct sdram_info {
-	uchar drb_size;
-	uchar registered, ecc;
-	uchar tpar;
-	uchar tras_clocks;
-	uchar burst_len;
-	uchar banks, slot;
-} sdram_info_t;
-
-/* Typedefs for 'gtAuxilGetDIMMinfo' function */
-
-typedef enum _memoryType { SDRAM, DDR } MEMORY_TYPE;
-
-typedef enum _voltageInterface { TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
-	SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
-} VOLTAGE_INTERFACE;
-
-typedef enum _max_CL_supported_DDR { DDR_CL_1 = 1, DDR_CL_1_5 = 2, DDR_CL_2 =
-		4, DDR_CL_2_5 = 8, DDR_CL_3 = 16, DDR_CL_3_5 =
-		32, DDR_CL_FAULT } MAX_CL_SUPPORTED_DDR;
-typedef enum _max_CL_supported_SD { SD_CL_1 =
-		1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7,
-		SD_FAULT } MAX_CL_SUPPORTED_SD;
-
-
-/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo {
-	MEMORY_TYPE memoryType;
-	unsigned int numOfRowAddresses;
-	unsigned int numOfColAddresses;
-	unsigned int numOfModuleBanks;
-	unsigned int dataWidth;
-	VOLTAGE_INTERFACE voltageInterface;
-	unsigned int errorCheckType;	/* ECC , PARITY.. */
-	unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
-	unsigned int errorCheckDataWidth;	/* 0 - no, 1 - Yes */
-	unsigned int minClkDelay;
-	unsigned int burstLengthSupported;
-	unsigned int numOfBanksOnEachDevice;
-	unsigned int suportedCasLatencies;
-	unsigned int RefreshInterval;
-	unsigned int maxCASlatencySupported_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int maxCASlatencySupported_RoP;	/* RoP right of point (measured in ns) */
-	MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
-	MAX_CL_SUPPORTED_SD maxClSupported_SD;
-	unsigned int moduleBankDensity;
-	/* module attributes (true for yes) */
-	bool bufferedAddrAndControlInputs;
-	bool registeredAddrAndControlInputs;
-	bool onCardPLL;
-	bool bufferedDQMBinputs;
-	bool registeredDQMBinputs;
-	bool differentialClockInput;
-	bool redundantRowAddressing;
-
-	/* module general attributes */
-	bool suportedAutoPreCharge;
-	bool suportedPreChargeAll;
-	bool suportedEarlyRasPreCharge;
-	bool suportedWrite1ReadBurst;
-	bool suported5PercentLowVCC;
-	bool suported5PercentUpperVCC;
-	/* module timing parameters */
-	unsigned int minRasToCasDelay;
-	unsigned int minRowActiveRowActiveDelay;
-	unsigned int minRasPulseWidth;
-	unsigned int minRowPrechargeTime;	/* measured in ns */
-
-	int addrAndCommandHoldTime;	/* LoP left of point (measured in ns) */
-	int addrAndCommandSetupTime;	/* (measured in ns/100) */
-	int dataInputSetupTime;	/* LoP left of point (measured in ns) */
-	int dataInputHoldTime;	/* LoP left of point (measured in ns) */
-/* tAC times for highest 2nd and 3rd highest CAS Latency values */
-	unsigned int clockToDataOut_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOut_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancy_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancy_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP;	/* RoP right of point (measured in ns) */
-
-	/* Parameters calculated from
-	   the extracted DIMM information */
-	unsigned int size;
-	unsigned int deviceDensity;	/* 16,64,128,256 or 512 Mbit */
-	unsigned int numberOfDevices;
-	uchar drb_size;		/* DRAM size in n*64Mbit */
-	uchar slot;		/* Slot Number this module is inserted in */
-	uchar spd_raw_data[128];	/* Content of SPD-EEPROM copied 1:1 */
-#ifdef DEBUG
-	uchar manufactura[8];	/* Content of SPD-EEPROM Byte 64-71 */
-	uchar modul_id[18];	/* Content of SPD-EEPROM Byte 73-90 */
-	uchar vendor_data[27];	/* Content of SPD-EEPROM Byte 99-125 */
-	unsigned long modul_serial_no;	/* Content of SPD-EEPROM Byte 95-98 */
-	unsigned int manufac_date;	/* Content of SPD-EEPROM Byte 93-94 */
-	unsigned int modul_revision;	/* Content of SPD-EEPROM Byte 91-92 */
-	uchar manufac_place;	/* Content of SPD-EEPROM Byte 72 */
-
-#endif
-} AUX_MEM_DIMM_INFO;
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NS10to10PS (unsigned char spd_byte)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NSto10PS (unsigned char spd_byte)
-{
-	return (spd_byte * 100);
-}
-
-/* This code reads the SPD chip on the sdram and populates
- * the array which is passed in with the relevant information */
-/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
-static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
-{
-	unsigned long spd_checksum;
-
-#ifdef ZUMA_NTL
-	/* zero all the values */
-	memset (info, 0, sizeof (*info));
-
-/*
-	if (!slot) {
-	    info->slot = 0;
-	    info->banks = 1;
-	    info->registered = 0;
-		    info->drb_size = 16;*/ /* 16 - 256MBit, 32 - 512MBit */
-/*	    info->tpar = 3;
-	    info->tras_clocks = 5;
-	    info->burst_len = 4;
-*/
-#ifdef CONFIG_MV64460_ECC
-	/* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
-	dimmInfo->errorCheckType = 2;
-/*	    info->ecc = 2;*/
-#endif
-}
-
-return 0;
-
-#else
-	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
-	int ret;
-	unsigned int i, j, density = 1, devicesForErrCheck = 0;
-
-#ifdef DEBUG
-	unsigned int k;
-#endif
-	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
-	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
-	uchar supp_cal, cal_val;
-	ulong memclk, tmemclk;
-	ulong tmp;
-	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
-	uchar data[128];
-
-	memclk = gd->bus_clk;
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-	DP (puts ("before i2c read\n"));
-
-	ret = i2c_read (addr, 0, 1, data, 128);
-
-	DP (puts ("after i2c read\n"));
-
-	/* zero all the values */
-	memset (dimmInfo, 0, sizeof (*dimmInfo));
-
-	/* copy the SPD content 1:1 into the dimmInfo structure */
-	for (i = 0; i <= 127; i++) {
-		dimmInfo->spd_raw_data[i] = data[i];
-	}
-
-	if (ret) {
-		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
-		return 0;
-	} else
-		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
-
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
-
-	for (i = 0; i <= 127; i++) {
-		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
-			data[i]);
-	}
-
-#endif
-#ifdef DEBUG
-/* find Manufactura of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
-		dimmInfo->manufactura[i] = data[64 + i];
-	}
-	printf ("\nThis RAM-Module is produced by: 		%s\n",
-		dimmInfo->manufactura);
-
-/* find Manul-ID of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
-		dimmInfo->modul_id[i] = data[73 + i];
-	}
-	printf ("The Module-ID of this RAM-Module is: 		%s\n",
-		dimmInfo->modul_id);
-
-/* find Vendor-Data of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
-		dimmInfo->vendor_data[i] = data[99 + i];
-	}
-	printf ("Vendor Data of this RAM-Module is: 		%s\n",
-		dimmInfo->vendor_data);
-
-/* find modul_serial_no of Dimm Module */
-	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
-	printf ("Serial No. of this RAM-Module is: 		%ld (%lx)\n",
-		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
-
-/* find Manufac-Data of Dimm Module */
-	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
-	printf ("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
-
-/* find modul_revision of Dimm Module */
-	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
-	printf ("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
-
-/* find manufac_place of Dimm Module */
-	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
-	printf ("manufac_place of this RAM-Module is: 		%d\n",
-		dimmInfo->manufac_place);
-
-#endif
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-/* calculate SPD checksum */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	spd_checksum = 0;
-
-	for (i = 0; i <= 62; i++) {
-		spd_checksum += data[i];
-	}
-
-	if ((spd_checksum & 0xff) != data[63]) {
-		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
-		hang ();
-	}
-
-	else
-		printf ("SPD Checksum ok!\n");
-
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	for (i = 2; i <= 35; i++) {
-		switch (i) {
-		case 2:	/* Memory type (DDR / SDRAM) */
-			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
-#ifdef DEBUG
-			if (dimmInfo->memoryType == 0)
-				DP (printf
-				    ("Dram_type in slot %d is: 			SDRAM\n",
-				     dimmInfo->slot));
-			if (dimmInfo->memoryType == 1)
-				DP (printf
-				    ("Dram_type in slot %d is: 			DDRAM\n",
-				     dimmInfo->slot));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 3:	/* Number Of Row Addresses */
-			dimmInfo->numOfRowAddresses = data[i];
-			DP (printf
-			    ("Module Number of row addresses: 		%d\n",
-			     dimmInfo->numOfRowAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 4:	/* Number Of Column Addresses */
-			dimmInfo->numOfColAddresses = data[i];
-			DP (printf
-			    ("Module Number of col addresses: 		%d\n",
-			     dimmInfo->numOfColAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 5:	/* Number Of Module Banks */
-			dimmInfo->numOfModuleBanks = data[i];
-			DP (printf
-			    ("Number of Banks on Mod. : 				%d\n",
-			     dimmInfo->numOfModuleBanks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 6:	/* Data Width */
-			dimmInfo->dataWidth = data[i];
-			DP (printf
-			    ("Module Data Width: 				%d\n",
-			     dimmInfo->dataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 8:	/* Voltage Interface */
-			switch (data[i]) {
-			case 0x0:
-				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
-				DP (printf
-				    ("Module is 					TTL_5V_TOLERANT\n"));
-				break;
-			case 0x1:
-				dimmInfo->voltageInterface = LVTTL;
-				DP (printf
-				    ("Module is 					LVTTL\n"));
-				break;
-			case 0x2:
-				dimmInfo->voltageInterface = HSTL_1_5V;
-				DP (printf
-				    ("Module is 					TTL_5V_TOLERANT\n"));
-				break;
-			case 0x3:
-				dimmInfo->voltageInterface = SSTL_3_3V;
-				DP (printf
-				    ("Module is 					HSTL_1_5V\n"));
-				break;
-			case 0x4:
-				dimmInfo->voltageInterface = SSTL_2_5V;
-				DP (printf
-				    ("Module is 					SSTL_2_5V\n"));
-				break;
-			default:
-				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
-				DP (printf
-				    ("Module is 					VOLTAGE_UNKNOWN\n"));
-				break;
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 9:	/* Minimum Cycle Time At Max CasLatancy */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
-				rightOfPoint;
-			DP (printf
-			    ("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 10:	/* Clock To Data Out */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOut_LoP = leftOfPoint;
-			dimmInfo->clockToDataOut_RoP = rightOfPoint;
-			DP (printf ("Clock To Data Out: 				%d.%2d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->clockToDataOut */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-/*#ifdef CONFIG_ECC */
-		case 11:	/* Error Check Type */
-			dimmInfo->errorCheckType = data[i];
-			DP (printf
-			    ("Error Check Type (0=NONE): 			%d\n",
-			     dimmInfo->errorCheckType));
-			break;
-/* #endif */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 12:	/* Refresh Interval */
-			dimmInfo->RefreshInterval = data[i];
-			DP (printf
-			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
-			     dimmInfo->RefreshInterval));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 13:	/* Sdram Width */
-			dimmInfo->sdramWidth = data[i];
-			DP (printf
-			    ("Sdram Width: 					%d\n",
-			     dimmInfo->sdramWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 14:	/* Error Check Data Width */
-			dimmInfo->errorCheckDataWidth = data[i];
-			DP (printf
-			    ("Error Check Data Width: 			%d\n",
-			     dimmInfo->errorCheckDataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 15:	/* Minimum Clock Delay */
-			dimmInfo->minClkDelay = data[i];
-			DP (printf
-			    ("Minimum Clock Delay: 				%d\n",
-			     dimmInfo->minClkDelay));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 16:	/* Burst Length Supported */
-			   /******-******-******-*******
-			   * bit3 | bit2 | bit1 | bit0 *
-			   *******-******-******-*******
-	    burst length = *  8   |  4   |   2  |   1  *
-			   *****************************
-
-	    If for example bit0 and bit2 are set, the burst
-	    length supported are 1 and 4. */
-
-			dimmInfo->burstLengthSupported = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Burst Length Supported: 			"));
-			if (dimmInfo->burstLengthSupported & 0x01)
-				DP (printf ("1, "));
-			if (dimmInfo->burstLengthSupported & 0x02)
-				DP (printf ("2, "));
-			if (dimmInfo->burstLengthSupported & 0x04)
-				DP (printf ("4, "));
-			if (dimmInfo->burstLengthSupported & 0x08)
-				DP (printf ("8, "));
-			DP (printf (" Bit \n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 17:	/* Number Of Banks On Each Device */
-			dimmInfo->numOfBanksOnEachDevice = data[i];
-			DP (printf
-			    ("Number Of Banks On Each Chip: 			%d\n",
-			     dimmInfo->numOfBanksOnEachDevice));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 18:	/* Suported Cas Latencies */
-
-			/*     DDR:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
-			 *********************************************************
-			 SDRAM:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
-			 ********************************************************/
-			dimmInfo->suportedCasLatencies = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Suported Cas Latencies: (CL) 			"));
-			if (dimmInfo->memoryType == 0) {	/* SDRAM */
-				for (k = 0; k <= 7; k++) {
-					if (dimmInfo->
-					    suportedCasLatencies & (1 << k))
-						DP (printf
-						    ("%d, 			",
-						     k + 1));
-				}
-
-			} else {	/* DDR-RAM */
-
-				if (dimmInfo->suportedCasLatencies & 1)
-					DP (printf ("1, "));
-				if (dimmInfo->suportedCasLatencies & 2)
-					DP (printf ("1.5, "));
-				if (dimmInfo->suportedCasLatencies & 4)
-					DP (printf ("2, "));
-				if (dimmInfo->suportedCasLatencies & 8)
-					DP (printf ("2.5, "));
-				if (dimmInfo->suportedCasLatencies & 16)
-					DP (printf ("3, "));
-				if (dimmInfo->suportedCasLatencies & 32)
-					DP (printf ("3.5, "));
-
-			}
-			DP (printf ("\n"));
-#endif
-			/* Calculating MAX CAS latency */
-			for (j = 7; j > 0; j--) {
-				if (((dimmInfo->
-				      suportedCasLatencies >> j) & 0x1) ==
-				    1) {
-					switch (dimmInfo->memoryType) {
-					case DDR:
-						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
-						switch (j) {
-						case 7:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 6:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 5:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3_5;
-							break;
-						case 4:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			3 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3;
-							break;
-						case 3:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2_5;
-							break;
-						case 2:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			2 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2;
-							break;
-						case 1:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_1_5;
-							break;
-						}
-
-						/* ronen - in case we have a DIMM with minimumCycleTimeAtMaxCasLatancy
-						   lower then our SDRAM cycle count, we won't be able to support this CAL
-						   and we will have to use lower CAL. (minus - means from 3.0 to 2.5) */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								dimmInfo->
-								maxClSupported_DDR
-								>> 1;
-							DP (printf
-							    ("*** Change actual Cas Latencies cause of minimumCycleTime n"));
-						}
-						/* ronen - checkif the Dimm frequency compared to the Sysclock. */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							printf ("*********************************************************\n");
-							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
-							printf ("*********************************************************\n");
-							hang ();
-						}
-
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							=
-							1 +
-							(int) (5 * j / 10);
-						if (((5 * j) % 10) != 0)
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 5;
-						else
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					case SDRAM:
-						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
-						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded                   */
-						DP (printf
-						    ("Max. Cas Latencies (SD): %d\n",
-						     dimmInfo->
-						     maxClSupported_SD));
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							= j;
-						dimmInfo->
-							maxCASlatencySupported_RoP
-							= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					}
-					break;
-				}
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 21:	/* Buffered Address And Control Inputs */
-			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
-			dimmInfo->bufferedAddrAndControlInputs =
-				data[i] & BIT0;
-			dimmInfo->registeredAddrAndControlInputs =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
-			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
-			dimmInfo->registeredDQMBinputs =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->differentialClockInput =
-				(data[i] & BIT5) >> 5;
-			dimmInfo->redundantRowAddressing =
-				(data[i] & BIT6) >> 6;
-#ifdef DEBUG
-			if (dimmInfo->bufferedAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Buffered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Buffered Address/Control Input:		No \n"));
-
-			if (dimmInfo->registeredAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Registered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Registered Address/Control Input:		No \n"));
-
-			if (dimmInfo->onCardPLL == 1)
-				DP (printf
-				    (" - On-Card PLL (clock):				Yes \n"));
-			else
-				DP (printf
-				    (" - On-Card PLL (clock):				No \n"));
-
-			if (dimmInfo->bufferedDQMBinputs == 1)
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				Yes \n"));
-			else
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				No \n"));
-
-			if (dimmInfo->registeredDQMBinputs == 1)
-				DP (printf
-				    (" - Registered DQMB Inputs:			Yes \n"));
-			else
-				DP (printf
-				    (" - Registered DQMB Inputs:			No \n"));
-
-			if (dimmInfo->differentialClockInput == 1)
-				DP (printf
-				    (" - Differential Clock Input:			Yes \n"));
-			else
-				DP (printf
-				    (" - Differential Clock Input:			No \n"));
-
-			if (dimmInfo->redundantRowAddressing == 1)
-				DP (printf
-				    (" - redundant Row Addressing:			Yes \n"));
-			else
-				DP (printf
-				    (" - redundant Row Addressing:			No \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 22:	/* Suported AutoPreCharge */
-			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
-			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
-			dimmInfo->suportedAutoPreCharge =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->suportedPreChargeAll =
-				(data[i] & BIT2) >> 2;
-			dimmInfo->suportedWrite1ReadBurst =
-				(data[i] & BIT3) >> 3;
-			dimmInfo->suported5PercentLowVCC =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->suported5PercentUpperVCC =
-				(data[i] & BIT5) >> 5;
-#ifdef DEBUG
-			if (dimmInfo->suportedEarlyRasPreCharge == 1)
-				DP (printf
-				    (" - Early Ras Precharge:			Yes \n"));
-			else
-				DP (printf
-				    (" -  Early Ras Precharge:			No \n"));
-
-			if (dimmInfo->suportedAutoPreCharge == 1)
-				DP (printf
-				    (" - AutoPreCharge:				Yes \n"));
-			else
-				DP (printf
-				    (" -  AutoPreCharge:				No \n"));
-
-			if (dimmInfo->suportedPreChargeAll == 1)
-				DP (printf
-				    (" - Precharge All:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Precharge All:				No \n"));
-
-			if (dimmInfo->suportedWrite1ReadBurst == 1)
-				DP (printf
-				    (" - Write 1/ReadBurst:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Write 1/ReadBurst:				No \n"));
-
-			if (dimmInfo->suported5PercentLowVCC == 1)
-				DP (printf
-				    (" - lower VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    ("  - lower VCC tolerance:			10 Percent \n"));
-
-			if (dimmInfo->suported5PercentUpperVCC == 1)
-				DP (printf
-				    (" - upper VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    (" -  upper VCC tolerance:			10 Percent \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
-				rightOfPoint;
-			DP (printf ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
-				rightOfPoint;
-			DP (printf ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 27:	/* Minimum Row Precharge Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
-			trp_clocks =
-				(dimmInfo->minRowPrechargeTime +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
-			     tmemclk, tmemclk / 100, tmemclk % 100));
-			DP (printf
-			    ("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 28:	/* Minimum Row Active to Row Active Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trrd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 29:	/* Minimum Ras-To-Cas Delay */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trcd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 30:	/* Minimum Ras Pulse Width */
-			dimmInfo->minRasPulseWidth = data[i];
-			tras_clocks =
-				(NSto10PS (data[i]) +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n",
-			     dimmInfo->minRasPulseWidth, tras_clocks));
-
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 31:	/* Module Bank Density */
-			dimmInfo->moduleBankDensity = data[i];
-			DP (printf
-			    ("Module Bank Density: 				%d\n",
-			     dimmInfo->moduleBankDensity));
-#ifdef DEBUG
-			DP (printf
-			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
-			{
-				if (dimmInfo->moduleBankDensity & 1)
-					DP (printf ("4MB, "));
-				if (dimmInfo->moduleBankDensity & 2)
-					DP (printf ("8MB, "));
-				if (dimmInfo->moduleBankDensity & 4)
-					DP (printf ("16MB, "));
-				if (dimmInfo->moduleBankDensity & 8)
-					DP (printf ("32MB, "));
-				if (dimmInfo->moduleBankDensity & 16)
-					DP (printf ("64MB, "));
-				if (dimmInfo->moduleBankDensity & 32)
-					DP (printf ("128MB, "));
-				if ((dimmInfo->moduleBankDensity & 64)
-				    || (dimmInfo->moduleBankDensity & 128)) {
-					DP (printf ("ERROR, "));
-					hang ();
-				}
-			}
-			DP (printf ("\n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Setup Time [ns]: 		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 33:	/* Address And Command Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Hold Time [ns]: 		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 34:	/* Data Input Setup Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Setup Time [ns]: 			%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 35:	/* Data Input Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Hold Time [ns]: 			%d.%d\n\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-		}
-	}
-	/* calculating the sdram density */
-	for (i = 0;
-	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
-	     i++) {
-		density = density * 2;
-	}
-	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
-		dimmInfo->sdramWidth;
-	dimmInfo->numberOfDevices =
-		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
-		dimmInfo->numOfModuleBanks;
-	devicesForErrCheck =
-		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
-	if ((dimmInfo->errorCheckType == 0x1)
-	    || (dimmInfo->errorCheckType == 0x2)
-	    || (dimmInfo->errorCheckType == 0x3)) {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			(dimmInfo->numberOfDevices -
-			 /* ronen on the 1G dimm we get wrong value. (was devicesForErrCheck) */
-			 dimmInfo->numberOfDevices / 8);
-	} else {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			dimmInfo->numberOfDevices;
-	}
-
-	/* compute the module DRB size */
-	tmp = (1 <<
-	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
-	tmp *= dimmInfo->numOfModuleBanks;
-	tmp *= dimmInfo->sdramWidth;
-	tmp = tmp >> 24;	/* div by 0x4000000 (64M)       */
-	dimmInfo->drb_size = (uchar) tmp;
-	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
-
-	/* try a CAS latency of 3 first... */
-
-	/* bit 1 is CL2, bit 2 is CL3 */
-	supp_cal = (dimmInfo->suportedCasLatencies & 0x6) >> 1;
-
-	cal_val = 0;
-	if (supp_cal & 3) {
-		if (NS10to10PS (data[9]) <= tmemclk)
-			cal_val = 3;
-	}
-
-	/* then 2... */
-	if (supp_cal & 2) {
-		if (NS10to10PS (data[23]) <= tmemclk)
-			cal_val = 2;
-	}
-
-	DP (printf ("cal_val = %d\n", cal_val));
-
-	/* bummer, did't work... */
-	if (cal_val == 0) {
-		DP (printf ("Couldn't find a good CAS latency\n"));
-		hang ();
-		return 0;
-	}
-
-	return true;
-#endif
-}
-
-/* sets up the GT properly with information passed in */
-int setup_sdram (AUX_MEM_DIMM_INFO * info)
-{
-	ulong tmp, check;
-	ulong tmp_sdram_mode = 0;	/* 0x141c */
-	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
-	int i;
-
-	/* added 8/21/2003 P. Marchese */
-	unsigned int sdram_config_reg;
-
-	/* added 10/10/2003 P. Marchese */
-	ulong sdram_chip_size;
-
-	/* sanity checking */
-	if (!info->numOfModuleBanks) {
-		printf ("setup_sdram called with 0 banks\n");
-		return 1;
-	}
-
-	/* delay line */
-	set_dfcdlInit ();	/* may be its not needed */
-	DP (printf ("Delay line set done\n"));
-
-	/* set SDRAM mode NOP */ /* To_do check it */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
-	}
-
-	/* SDRAM configuration */
-/* added 8/21/2003 P. Marchese */
-/* code allows usage of registered DIMMS */
-
-	/* figure out the memory refresh internal */
-	switch (info->RefreshInterval) {
-	case 0x0:
-	case 0x80:		/* refresh period is 15.625 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
-					/ (float) 1000000.0);
-		break;
-	case 0x1:
-	case 0x81:		/* refresh period is 3.9 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x2:
-	case 0x82:		/* refresh period is 7.8 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x3:
-	case 0x83:		/* refresh period is 31.3 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x4:
-	case 0x84:		/* refresh period is 62.5 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	case 0x5:
-	case 0x85:		/* refresh period is 125 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
-					(float) 1000000.0);
-		break;
-	default:		/* refresh period undefined */
-		printf ("DRAM refresh period is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-	DP (printf ("calculated refresh interval %0x\n", sdram_config_reg));
-
-	/* make sure the refresh value is only 14 bits */
-	if (sdram_config_reg > 0x1fff)
-		sdram_config_reg = 0x1fff;
-	DP (printf ("adjusted refresh interval %0x\n", sdram_config_reg));
-
-	/* we want physical bank interleaving and */
-	/* virtual bank interleaving enabled so do nothing */
-	/* since these bits need to be zero to enable the interleaving */
-
-	/*  registered DRAM ? */
-	if (info->registeredAddrAndControlInputs == 1) {
-		/* it's registered DRAM, so set the reg. DRAM bit */
-		sdram_config_reg = sdram_config_reg | BIT17;
-		DP (printf ("Enabling registered DRAM bit\n"));
-	}
-	/* turn on DRAM ECC? */
-#ifdef CONFIG_MV64460_ECC
-	if (info->errorCheckType == 0x2) {
-		/* DRAM has ECC, so turn it on */
-		sdram_config_reg = sdram_config_reg | BIT18;
-		DP (printf ("Enabling ECC\n"));
-	}
-#endif
-	/* set the data DQS pin configuration */
-	switch (info->sdramWidth) {
-	case 0x4:		/* memory is x4 */
-		sdram_config_reg = sdram_config_reg | BIT20 | BIT21;
-		DP (printf ("Data DQS pins set for 16 pins\n"));
-		break;
-	case 0x8:		/* memory is x8 or x16 */
-	case 0x10:
-		sdram_config_reg = sdram_config_reg | BIT21;
-		DP (printf ("Data DQS pins set for 8 pins\n"));
-		break;
-	case 0x20:		/* memory is x32 */
-		/* both bits are cleared for x32 so nothing to do */
-		DP (printf ("Data DQS pins set for 2 pins\n"));
-		break;
-	default:		/* memory width unsupported */
-		printf ("DRAM chip width is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-
-	/*ronen db64460 */
-	/* perform read buffer assignments */
-	/* we are going to use the Power-up defaults */
-	/* bit 27 = PCI bus #0 = buffer 0 */
-	/* bit 28 = PCI bus #1 = buffer 0 */
-	/* bit 29 = MPSC = buffer 0 */
-	/* bit 30 = IDMA = buffer 0 */
-	/* bit 31 = Gigabit = buffer 0 */
-	sdram_config_reg = sdram_config_reg | 0x58000000;
-	sdram_config_reg = sdram_config_reg & 0xffffff00;
-	/* bit 14 FBSplit = FCRAM controller bsplit enable. */
-	/* bit 15 vw = FCRAM Variable write length enable.   */
-	/* bit 16 DType = Dram Type (0 = FCRAM,1 = Standard) */
-	sdram_config_reg = sdram_config_reg | BIT14 | BIT15;
-
-	/* write the value into the SDRAM configuration register */
-	GT_REG_WRITE (SDRAM_CONFIG, sdram_config_reg);
-	DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM open pages control keep open as much as I can */
-	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
-	DP (printf
-	    ("sdram_open_pages_controll 0x1414: %08x\n",
-	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
-	if (tmp == 0)
-		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
-	else
-		DP (printf
-		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
-
-	/* SDRAM set CAS Latency according to SPD information */
-	switch (info->memoryType) {
-	case SDRAM:
-		printf ("### SD-RAM not supported !!!\n");
-		printf ("Aborting!!!\n");
-		hang ();
-		/* ToDo fill SD-RAM if needed !!!!! */
-		break;
-		/* Calculate the settings for SDRAM mode and Dunit control low registers */
-		/* Values set according to technical bulletin TB-92 rev. c */
-	case DDR:
-		DP (printf ("### SET-CL for DDR-RAM\n"));
-		/* ronen db64460 - change the tmp_dunit_control_low setting!!! */
-		switch (info->maxClSupported_DDR) {
-		case DDR_CL_3:
-			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
-			if (tmp == 1) {	/* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x05110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				DP (printf
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
-			} else {	/* clk sync. bypassed   */
-
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0xC5000540;
-				else
-					tmp_dunit_control_low = 0xC4000540;
-				DP (printf
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_2_5:
-			tmp_sdram_mode = 0x62;	/* CL=2.5 Burstlength = 4 */
-			if (tmp == 1) {	/* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x25110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				DP (printf
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
-			} else {	/* clk sync. bypassed   */
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0xC5000540;
-					/* printf("CL = 2.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
-					/* printf("Aborting!!!\n");1 */
-					/* hang();1 */
-				} else
-					tmp_dunit_control_low = 0xC4000540;
-				DP (printf
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_2:
-			tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
-			if (tmp == 1) {	/* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x04110051;
-				else
-					tmp_dunit_control_low = 0x03110051;
-				DP (printf
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
-			} else {	/* clk sync. bypassed   */
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					/*printf("CL = 2, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
-					/*printf("Aborting!!!\n");1 */
-					/*hang();1 */
-					tmp_dunit_control_low = 0xC4000540;
-				} else
-					tmp_dunit_control_low = 0xC3000540;;
-				DP (printf
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-		case DDR_CL_1_5:
-			tmp_sdram_mode = 0x52;	/* CL=1.5 Burstlength = 4 */
-			if (tmp == 1) {	/* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x24110051;
-				else
-					tmp_dunit_control_low = 0x23110051;
-				DP (printf
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
-			} else {	/* clk sync. bypassed   */
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					/*printf("CL = 1.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
-					/*printf("Aborting!!!\n");1 */
-					/*hang();1 */
-					tmp_dunit_control_low = 0xC4000540;
-				} else
-					tmp_dunit_control_low = 0xC3000540;
-				DP (printf
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-
-		default:
-			printf ("Max. CL is out of range %d\n",
-				info->maxClSupported_DDR);
-			hang ();
-			break;
-		}		/* end DDR switch */
-		break;
-	}			/* end CL switch */
-
-	/* Write results of CL detection procedure */
-	/* set SDRAM mode reg. 0x141c */
-	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 0x1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
-	}
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	GT_REG_WRITE (D_UNIT_CONTROL_LOW, tmp_dunit_control_low);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
-	}
-
-/*------------------------------------------------------------------------------ */
-
-	/* bank parameters */
-	/* SDRAM address decode register 0x1410 */
-	/* program this with the default value */
-	tmp = 0x02;		/* power-up default address select decoding value */
-
-	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
-/* figure out the DRAM chip size */
-	sdram_chip_size =
-		(1 << (info->numOfRowAddresses + info->numOfColAddresses));
-	sdram_chip_size *= info->sdramWidth;
-	sdram_chip_size *= 4;
-	DP (printf ("computed sdram chip size is %#lx\n", sdram_chip_size));
-	/* divide sdram chip size by 64 Mbits */
-	sdram_chip_size = sdram_chip_size / 0x4000000;
-	switch (sdram_chip_size) {
-	case 1:		/* 64 Mbit */
-	case 2:		/* 128 Mbit */
-		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
-		tmp |= (0x00 << 4);
-		break;
-	case 4:		/* 256 Mbit */
-	case 8:		/* 512 Mbit */
-		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
-		tmp |= (0x01 << 4);
-		break;
-	case 16:		/* 1 Gbit */
-	case 32:		/* 2 Gbit */
-		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
-		tmp |= (0x02 << 4);
-		break;
-	default:
-		printf ("Error in dram size calculation\n");
-		printf ("RAM-Device_size is unsupported\n");
-		hang ();
-	}
-
-	/* SDRAM address control */
-	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
-	DP (printf
-	    ("setting up sdram address control (0x1410) with: %08lx \n",
-	     tmp));
-
-/* ------------------------------------------------------------------------------ */
-/* same settings for registerd & non-registerd DDR SDRAM */
-	DP (printf
-	    ("setting up sdram_timing_control_low (0x1408) with: %08x \n",
-	     0x01501220));
-	/*ronen db64460 */
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x01501220);
-
-
-/* ------------------------------------------------------------------------------ */
-
-	/* SDRAM configuration */
-	tmp = GTREGREAD (SDRAM_CONFIG);
-
-	if (info->registeredAddrAndControlInputs
-	    || info->registeredDQMBinputs) {
-		tmp |= (1 << 17);
-		DP (printf
-		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
-		     info->registeredAddrAndControlInputs,
-		     info->registeredDQMBinputs));
-	}
-
-	/* Use buffer 1 to return read data to the CPU
-	 * Page 426 MV6indent: Standard input:1464: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
-
-indent: Standard input:1465: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
-
-4460 */
-	tmp |= (1 << 26);
-	DP (printf
-	    ("Before Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-	DP (printf
-	    ("After Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM timing To_do: */
-/* ------------------------------------------------------------------------------ */
-	/* ronen db64460 */
-	DP (printf
-	    ("setting up sdram_timing_control_high (0x140c) with: %08x \n",
-	     0xc));
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_HIGH, 0xc);
-
-	DP (printf
-	    ("setting up sdram address pads control (0x14c0) with: %08x \n",
-	     0x7d5014a));
-	GT_REG_WRITE (SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x7d5014a);
-
-	DP (printf
-	    ("setting up sdram data pads control (0x14c4) with: %08x \n",
-	     0x7d5014a));
-	GT_REG_WRITE (SDRAM_DATA_PADS_CALIBRATION, 0x7d5014a);
-
-/* ------------------------------------------------------------------------------ */
-
-	/* set the SDRAM configuration for each bank */
-
-/*      for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
-	{
-		i = info->slot;
-		DP (printf
-		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
-
-		/* map the bank */
-		memory_map_bank (i, 0, GB / 4);
-
-		/* set SDRAM mode */ /* To_do check it */
-		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-
-
-		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-
-		/* unmap the bank */
-		memory_map_bank (i, 0, 0);
-	}
-
-	return 0;
-
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int dram_size (long int *base, long int maxsize)
-{
-	volatile long int *addr, *b = base;
-	long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20)	/* start test at 1M */
-	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
-	     cnt <<= 1) {
-		addr = base + cnt;	/* pointer arith! */
-
-		save1 = *addr;	/* save contents of addr */
-		save2 = *b;	/* save contents of base */
-
-		*addr = cnt;	/* write cnt to addr */
-		*b = 0;		/* put null at base */
-
-		/* check at base address */
-		if ((*b) != 0) {
-			*addr = save1;	/* restore *addr */
-			*b = save2;	/* restore *b */
-			return (0);
-		}
-		val = *addr;	/* read *addr */
-		val = *addr;	/* read *addr */
-
-		*addr = save1;
-		*b = save2;
-
-		if (val != cnt) {
-			DP (printf
-			    ("Found %08x  at Address %08x (failure)\n",
-			     (unsigned int) val, (unsigned int) addr));
-			/* fix boundary condition.. STARTVAL means zero */
-			if (cnt == STARTVAL / sizeof (long))
-				cnt = 0;
-			return (cnt * sizeof (long));
-		}
-	}
-	return maxsize;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* ppcboot interface function to SDRAM init - this is where all the
- * controlling logic happens */
-long int initdram (int board_type)
-{
-	int s0 = 0, s1 = 0;
-	int checkbank[4] = {[0 ... 3] = 0 };
-	ulong realsize, total, check;
-	AUX_MEM_DIMM_INFO dimmInfo1;
-	AUX_MEM_DIMM_INFO dimmInfo2;
-	int nhr, bank_no;
-	ulong dest, memSpaceAttr;
-
-	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
-
-	/* check the NHR bit and skip mem init if it's already done */
-	nhr = get_hid0 () & (1 << 16);
-
-	if (nhr) {
-		printf ("Skipping SD- DDRRAM setup due to NHR bit being set\n");
-	} else {
-		/* DIMM0 */
-		s0 = check_dimm (0, &dimmInfo1);
-
-		/* DIMM1 */
-		s1 = check_dimm (1, &dimmInfo2);
-
-		memory_map_bank (0, 0, 0);
-		memory_map_bank (1, 0, 0);
-		memory_map_bank (2, 0, 0);
-		memory_map_bank (3, 0, 0);
-
-		/* ronen check correct set of DIMMS */
-		if (dimmInfo1.numOfModuleBanks && dimmInfo2.numOfModuleBanks) {
-			if (dimmInfo1.errorCheckType !=
-			    dimmInfo2.errorCheckType)
-				printf ("***WARNNING***!!!! different ECC support of the DIMMS\n");
-			if (dimmInfo1.maxClSupported_DDR !=
-			    dimmInfo2.maxClSupported_DDR)
-				printf ("***WARNNING***!!!! different CAL setting of the DIMMS\n");
-			if (dimmInfo1.registeredAddrAndControlInputs !=
-			    dimmInfo2.registeredAddrAndControlInputs)
-				printf ("***WARNNING***!!!! different Registration setting of the DIMMS\n");
-		}
-
-		if (dimmInfo1.numOfModuleBanks && setup_sdram (&dimmInfo1)) {
-			printf ("Setup for DIMM1 failed.\n");
-		}
-
-		if (dimmInfo2.numOfModuleBanks && setup_sdram (&dimmInfo2)) {
-			printf ("Setup for DIMM2 failed.\n");
-		}
-
-		/* set the NHR bit */
-		set_hid0 (get_hid0 () | (1 << 16));
-	}
-	/* next, size the SDRAM banks */
-
-	realsize = total = 0;
-	check = GB / 4;
-	if (dimmInfo1.numOfModuleBanks > 0) {
-		checkbank[0] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 1) {
-		checkbank[1] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM1 has >2 banks\n");
-
-	printf ("-- DIMM1 has %d banks\n", dimmInfo1.numOfModuleBanks);
-
-	if (dimmInfo2.numOfModuleBanks > 0) {
-		checkbank[2] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 1) {
-		checkbank[3] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM2 has >2 banks\n");
-
-	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
-
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
-		/* skip over banks that are not populated */
-		if (!checkbank[bank_no])
-			continue;
-
-		/* ronen - realsize = dram_size((long int *)total, check); */
-		if (bank_no == 0 || bank_no == 1) {
-			if (checkbank[1] == 1)
-				realsize = dimmInfo1.size / 2;
-			else
-				realsize = dimmInfo1.size;
-		}
-		if (bank_no == 2 || bank_no == 3) {
-			if (checkbank[3] == 1)
-				realsize = dimmInfo2.size / 2;
-			else
-				realsize = dimmInfo2.size;
-		}
-		memory_map_bank (bank_no, total, realsize);
-
-		/* ronen - initialize the DRAM for ECC */
-#ifdef CONFIG_MV64460_ECC
-		if ((dimmInfo1.errorCheckType != 0) &&
-		    ((dimmInfo2.errorCheckType != 0)
-		     || (dimmInfo2.numOfModuleBanks == 0))) {
-			printf ("ECC Initialization of Bank %d:", bank_no);
-			memSpaceAttr = ((~(BIT0 << bank_no)) & 0xf) << 8;
-			mvDmaSetMemorySpace (0, 0, memSpaceAttr, total,
-					     realsize);
-			for (dest = total; dest < total + realsize;
-			     dest += _8M) {
-				mvDmaTransfer (0, total, dest, _8M,
-					       BIT8 /*DMA_DTL_128BYTES */  |
-					       BIT3 /*DMA_HOLD_SOURCE_ADDR */
-					       |
-					       BIT11
-					       /*DMA_BLOCK_TRANSFER_MODE */ );
-				while (mvDmaIsChannelActive (0));
-			}
-			printf (" PASS\n");
-		}
-#endif
-
-		total += realsize;
-	}
-
-	/* ronen */
-	switch ((GTREGREAD (0x141c) >> 4) & 0x7) {
-	case 0x2:
-		printf ("CAS Latency = 2");
-		break;
-	case 0x3:
-		printf ("CAS Latency = 3");
-		break;
-	case 0x5:
-		printf ("CAS Latency = 1.5");
-		break;
-	case 0x6:
-		printf ("CAS Latency = 2.5");
-		break;
-	}
-	printf (" tRP = %d tRAS = %d tRCD=%d\n",
-		((GTREGREAD (0x1408) >> 8) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 20) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 4) & 0xf) + 1);
-
-/*	Setup Ethernet DMA Adress window to DRAM Area */
-	if (total > _256M)
-		printf ("*** ONLY the first 256MB DRAM memory are used out of the ");
-	else
-		printf ("Total SDRAM memory is ");
-	/* (cause all the 4 BATS are taken) */
-	return (total);
-}
-
-
-/* ronen- add Idma functions for usage of the ecc dram init. */
-/*******************************************************************************
-* mvDmaIsChannelActive - Checks if a engine is busy.
-********************************************************************************/
-int mvDmaIsChannelActive (int engine)
-{
-	ulong data;
-
-	data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * engine);
-	if (data & BIT14 /*activity status */ ) {
-		return 1;
-	}
-	return 0;
-}
-
-/*******************************************************************************
-* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
-*                       map.
-*******************************************************************************/
-int mvDmaSetMemorySpace (ulong memSpace,
-			 ulong memSpaceTarget,
-			 ulong memSpaceAttr, ulong baseAddress, ulong size)
-{
-	ulong temp;
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return 0;
-	}
-	if (size >= 0x10000 /*64K */ ) {
-		size &= 0xffff0000;
-		baseAddress = (baseAddress & 0xffff0000);
-		/* Set the new attributes */
-		GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
-		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
-			      (temp & ~(BIT0 << memSpace)));
-		return 1;
-	}
-	return 0;
-}
-
-
-/*******************************************************************************
-* mvDmaTransfer - Transfer data from sourceAddr to destAddr on one of the 4
-*                 DMA channels.
-********************************************************************************/
-int mvDmaTransfer (int engine, ulong sourceAddr,
-		   ulong destAddr, ulong numOfBytes, ulong command)
-{
-	ulong engOffReg = 0;	/* Engine Offset Register */
-
-	if (numOfBytes > 0xffff) {
-		command = command | BIT31 /*DMA_16M_DESCRIPTOR_MODE */ ;
-	}
-	command = command | ((command >> 6) & 0x7);
-	engOffReg = engine * 4;
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg,
-		      numOfBytes);
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg,
-		      sourceAddr);
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg,
-		      destAddr);
-	command =
-		command | BIT12 /*DMA_CHANNEL_ENABLE */  | BIT9
-		/*DMA_NON_CHAIN_MODE */ ;
-	/* Activate DMA engine By writting to mvDmaControlRegister */
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
-	return 1;
-}
-
-/****************************************************************************************
- *			       SDRAM INIT						*
- *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
- *		 This procedure fits only the Atlantis					*
- *											*
- ***************************************************************************************/
-
-
-/****************************************************************************************
- *			       DFCDL initialize MV643xx Design Considerations		*
- *											*
- ***************************************************************************************/
-int set_dfcdlInit (void)
-{
-	/*ronen the dfcdl init are done by the I2C */
-	return (0);
-}
diff --git a/board/Marvell/db64460/u-boot.lds b/board/Marvell/db64460/u-boot.lds
deleted file mode 100644
index d89eb6cff2..0000000000
--- a/board/Marvell/db64460/u-boot.lds
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/74xx_7xx/start.o	(.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/*    . = env_offset; */
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/Marvell/include/core.h b/board/Marvell/include/core.h
deleted file mode 100644
index c41343919e..0000000000
--- a/board/Marvell/include/core.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* Core.h - Basic core logic functions and definitions */
-
-/* Copyright Galileo Technology. */
-
-/*
-DESCRIPTION
-This header file contains simple read/write macros for addressing
-the SDRAM, devices, GT`s internal registers and PCI (using the PCI`s address
-space). The macros take care of Big/Little endian conversions.
-*/
-
-#ifndef __INCcoreh
-#define __INCcoreh
-
-#include "mv_gen_reg.h"
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-/****************************************/
-/*	    GENERAL Definitions			*/
-/****************************************/
-
-#define NO_BIT		0x00000000
-#define BIT0		0x00000001
-#define BIT1		0x00000002
-#define BIT2		0x00000004
-#define BIT3		0x00000008
-#define BIT4		0x00000010
-#define BIT5		0x00000020
-#define BIT6		0x00000040
-#define BIT7		0x00000080
-#define BIT8		0x00000100
-#define BIT9		0x00000200
-#define BIT10		0x00000400
-#define BIT11		0x00000800
-#define BIT12		0x00001000
-#define BIT13		0x00002000
-#define BIT14		0x00004000
-#define BIT15		0x00008000
-#define BIT16		0x00010000
-#define BIT17		0x00020000
-#define BIT18		0x00040000
-#define BIT19		0x00080000
-#define BIT20		0x00100000
-#define BIT21		0x00200000
-#define BIT22		0x00400000
-#define BIT23		0x00800000
-#define BIT24		0x01000000
-#define BIT25		0x02000000
-#define BIT26		0x04000000
-#define BIT27		0x08000000
-#define BIT28		0x10000000
-#define BIT29		0x20000000
-#define BIT30		0x40000000
-#define BIT31		0x80000000
-
-#define _1K		0x00000400
-#define _2K		0x00000800
-#define _4K		0x00001000
-#define _8K		0x00002000
-#define _16K		0x00004000
-#define _32K		0x00008000
-#define _64K		0x00010000
-#define _128K		0x00020000
-#define _256K		0x00040000
-#define _512K		0x00080000
-
-#define _1M		0x00100000
-#define _2M		0x00200000
-#define _3M		0x00300000
-#define _4M		0x00400000
-#define _5M		0x00500000
-#define _6M		0x00600000
-#define _7M		0x00700000
-#define _8M		0x00800000
-#define _9M		0x00900000
-#define _10M		0x00a00000
-#define _11M		0x00b00000
-#define _12M		0x00c00000
-#define _13M		0x00d00000
-#define _14M		0x00e00000
-#define _15M		0x00f00000
-#define _16M		0x01000000
-
-#define _32M		0x02000000
-#define _64M		0x04000000
-#define _128M		0x08000000
-#define _256M		0x10000000
-#define _512M		0x20000000
-
-#define _1G		0x40000000
-#define _2G		0x80000000
-
-#ifndef	BOOL_WAS_DEFINED
-#define BOOL_WAS_DEFINED
-typedef enum _bool{false,true} bool;
-#endif
-
-/* Little to Big endian conversion macros */
-
-#ifdef LE /* Little Endian */
-#define SHORT_SWAP(X) (X)
-#define WORD_SWAP(X) (X)
-#define LONG_SWAP(X) ((l64)(X))
-
-#else	 /* Big Endian */
-#define SHORT_SWAP(X) ((X <<8 ) | (X >> 8))
-
-#define WORD_SWAP(X) (((X)&0xff)<<24)+	    \
-		    (((X)&0xff00)<<8)+	    \
-		    (((X)&0xff0000)>>8)+    \
-		    (((X)&0xff000000)>>24)
-
-#define LONG_SWAP(X) ( (l64) (((X)&0xffULL)<<56)+		\
-			    (((X)&0xff00ULL)<<40)+		\
-			    (((X)&0xff0000ULL)<<24)+		\
-			    (((X)&0xff000000ULL)<<8)+		\
-			    (((X)&0xff00000000ULL)>>8)+		\
-			    (((X)&0xff0000000000ULL)>>24)+	\
-			    (((X)&0xff000000000000ULL)>>40)+	\
-			    (((X)&0xff00000000000000ULL)>>56))
-
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* Those two definitions were defined to be compatible with MIPS */
-#define NONE_CACHEABLE		0x00000000
-#define CACHEABLE			0x00000000
-
-/* 750 cache line */
-#define CACHE_LINE_SIZE 32
-#define CACHELINE_MASK_BITS (CACHE_LINE_SIZE - 1)
-#define CACHELINE_ROUNDUP(A) (((A)+CACHELINE_MASK_BITS) & ~CACHELINE_MASK_BITS)
-
-/* Read/Write to/from GT`s internal registers */
-#define GT_REG_READ(offset, pData)					    \
-*pData = ( *((volatile unsigned int *)(NONE_CACHEABLE |			    \
-		INTERNAL_REG_BASE_ADDR | (offset))) ) ;						     \
-*pData = WORD_SWAP(*pData)
-
-#define GTREGREAD(offset)						    \
-	 (WORD_SWAP( *((volatile unsigned int *)(NONE_CACHEABLE |	     \
-		   INTERNAL_REG_BASE_ADDR | (offset))) ))
-
-#define GT_REG_WRITE(offset, data)					    \
-*((unsigned int *)( INTERNAL_REG_BASE_ADDR | (offset))) =		    \
-		    WORD_SWAP(data)
-
-/* Write 32/16/8 bit */
-#define WRITE_CHAR(address, data)					    \
-	*((unsigned char *)(address)) = data
-#define WRITE_SHORT(address, data)					    \
-	*((unsigned short *)(address)) = data
-#define WRITE_WORD(address, data)					    \
-	*((unsigned int *)(address)) = data
-
-#define GT_WRITE_CHAR(address, data)	 WRITE_CHAR(address, data)
-
-/* Write 32/16/8 bit NonCacheable */
-/*
-#define GT_WRITE_CHAR(address, data)					       \
-	(*((unsigned char *)NONE_CACHEABLE(address))) = data
-#define GT_WRITE_SHORT(address, data)					       \
-	(*((unsigned short *)NONE_CACHEABLE(address))) = data
-#define GT_WRITE_WORD(address, data)					       \
-	(*((unsigned int *)NONE_CACHEABLE(address))) = data
-*/
- /*#define GT_WRITE_CHAR(address, data)	  ((*((volatile unsigned char *)NONE_CACHEABLE((address)))) = ((unsigned char)(data)))1 */
-
- /*#define GT_WRITE_SHORT(address, data)   ((*((volatile unsigned short *)NONE_CACHEABLE((address)))) = ((unsigned short)(data)))1 */
-
- /*#define GT_WRITE_WORD(address, data)	 ((*((volatile unsigned int *)NONE_CACHEABLE((address)))) = ((unsigned int)(data)))1 */
-
-
-/* Read 32/16/8 bits - returns data in variable. */
-#define READ_CHAR(address, pData)					    \
-	*pData = *((volatile unsigned char *)(address))
-
-#define READ_SHORT(address, pData)					    \
-	*pData = *((volatile unsigned short *)(address))
-
-#define READ_WORD(address, pData)					    \
-	*pData = *((volatile unsigned int *)(address))
-
-/* Read 32/16/8 bit - returns data direct. */
-#define READCHAR(address)						    \
-	*((volatile unsigned char *)((address) | NONE_CACHEABLE))
-
-#define READSHORT(address)						    \
-	*((volatile unsigned short *)((address) | NONE_CACHEABLE))
-
-#define READWORD(address)						    \
-	*((volatile unsigned int *)((address) | NONE_CACHEABLE))
-
-/* Those two Macros were defined to be compatible with MIPS */
-#define VIRTUAL_TO_PHY(x)    (((unsigned int)x) & 0xffffffff)
-#define PHY_TO_VIRTUAL(x)    (((unsigned int)x) | NONE_CACHEABLE)
-
-/*  SET_REG_BITS(regOffset,bits) -
-   gets register offset and bits: a 32bit value. It set to logic '1' in the
-   internal register the bits which given as an input example:
-   SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
-   '1' in register 0x840 while the other bits stays as is. */
-#define SET_REG_BITS(regOffset,bits) \
-	*(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR |  \
-	regOffset) |= (unsigned int)WORD_SWAP(bits)
-
-/*  RESET_REG_BITS(regOffset,bits) -
-   gets register offset and bits: a 32bit value. It set to logic '0' in the
-   internal register the bits which given as an input example:
-   RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
-   '0' in register 0x840 while the other bits stays as is. */
-#define RESET_REG_BITS(regOffset,bits) \
-	*(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR   \
-	| regOffset) &= ~( (unsigned int)WORD_SWAP(bits) )
-/* gets register offset and bits: a 32bit value. It set to logic '1' in the
-   internal register the bits which given as an input example:
-   GT_SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
-   '1' in register 0x840 while the other bits stays as is. */
- /*#define GT_SET_REG_BITS(regOffset,bits)	((*((volatile unsigned int*)(NONE_CACHEABLE(INTERNAL_REG_BASE_ADDR) | (regOffset)))) |= ((unsigned int)WORD_SWAP(bits)))1 */
- /*#define GT_SET_REG_BITS(regOffset,bits) RESET_REG_BITS(regOffset,bits)1 */
-#define GT_SET_REG_BITS(regOffset,bits) SET_REG_BITS(regOffset,bits)
-/* gets register offset and bits: a 32bit value. It set to logic '0' in the
-   internal register the bits which given as an input example:
-   GT_RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to
-   logic '0' in register 0x840 while the other bits stays as is. */
- /*#define GT_RESET_REG_BITS(regOffset,bits)	((*((volatile unsigned int*)(NONE_CACHEABLE(INTERNAL_REG_BASE_ADDR) |  (regOffset)))) &= ~((unsigned int)WORD_SWAP(bits)))1 */
-#define GT_RESET_REG_BITS(regOffset,bits) RESET_REG_BITS(regOffset,bits)
-
-
-#define DEBUG_LED0_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x8000,0)
-#define DEBUG_LED1_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0xc000,0)
-#define DEBUG_LED2_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x10000,0)
-#define DEBUG_LED0_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x14000,0)
-#define DEBUG_LED1_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x18000,0)
-#define DEBUG_LED2_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x1c000,0)
-
-#endif /* __INCcoreh */
diff --git a/board/Marvell/include/memory.h b/board/Marvell/include/memory.h
deleted file mode 100644
index 0947b6e4ff..0000000000
--- a/board/Marvell/include/memory.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* Memory.h - Memory mappings and remapping functions declarations */
-
-/* Copyright - Galileo technology. */
-
-#ifndef __INCmemoryh
-#define __INCmemoryh
-
-/* includes */
-
-#include "core.h"
-
-/* defines */
-
-#define DONT_MODIFY	0xffffffff
-#define PARITY_SUPPORT	0x40000000
-#define MINIMUM_MEM_BANK_SIZE		0x10000
-#define MINIMUM_DEVICE_WINDOW_SIZE	0x10000
-#define MINIMUM_PCI_WINDOW_SIZE		0x10000
-#define MINIMUM_ACCESS_WIN_SIZE		0x10000
-
-#define _8BIT		0x00000000
-#define _16BIT		0x00100000
-#define _32BIT		0x00200000
-#define _64BIT		0x00300000
-
-/* typedefs */
-
- typedef struct deviceParam
-{						/* boundary values  */
-    unsigned int    turnOff;			/* 0x0 - 0xf	    */
-    unsigned int    acc2First;			/* 0x0 - 0x1f	    */
-    unsigned int    acc2Next;		/* 0x0 - 0x1f	    */
-    unsigned int    ale2Wr;			/* 0x0 - 0xf	    */
-    unsigned int    wrLow;			/* 0x0 - 0xf	    */
-    unsigned int    wrHigh;			/* 0x0 - 0xf	    */
-    unsigned int    badrSkew;		/* 0x0 - 0x2	   */
-    unsigned int    DPEn;			/* 0x0 - 0x1	   */
-    unsigned int    deviceWidth;	/* in Bytes  */
-} DEVICE_PARAM;
-
-
-typedef enum __memBank{BANK0,BANK1,BANK2,BANK3} MEMORY_BANK;
-typedef enum __memDevice{DEVICE0,DEVICE1,DEVICE2,DEVICE3,BOOT_DEVICE} DEVICE;
-
-/*typedef enum __memoryProtectRegion{MEM_REGION0,MEM_REGION1,MEM_REGION2,	\
-				   MEM_REGION3,MEM_REGION4,MEM_REGION5,	      \
-				   MEM_REGION6,MEM_REGION7}		      \
-				   MEMORY_PROTECT_REGION;*/
-/* There are four possible windows that can be defined as protected */
-typedef enum _memoryProtectWindow{MEM_WINDOW0,MEM_WINDOW1,MEM_WINDOW2,
-				  MEM_WINDOW3
-				 } MEMORY_PROTECT_WINDOW;
-/* When defining a protected window , this paramter indicates whether it
-   is accessible or not */
-typedef enum __memoryAccess{MEM_ACCESS_ALLOWED,MEM_ACCESS_FORBIDEN}	      \
-			    MEMORY_ACCESS;
-typedef enum __memoryWrite{MEM_WRITE_ALLOWED,MEM_WRITE_FORBIDEN}	      \
-			   MEMORY_ACCESS_WRITE;
-typedef enum __memoryCacheProtect{MEM_CACHE_ALLOWED,MEM_CACHE_FORBIDEN}	      \
-				  MEMORY_CACHE_PROTECT;
-typedef enum __memorySnoopType{MEM_NO_SNOOP,MEM_SNOOP_WT,MEM_SNOOP_WB}	      \
-			       MEMORY_SNOOP_TYPE;
-typedef enum __memorySnoopRegion{MEM_SNOOP_REGION0,MEM_SNOOP_REGION1,	      \
-				 MEM_SNOOP_REGION2,MEM_SNOOP_REGION3}	      \
-				 MEMORY_SNOOP_REGION;
-
-/* There are 21 memory windows dedicated for the varios interfaces (PCI,
-   devCS (devices), CS(DDR), interenal registers and SRAM) used by the CPU's
-   address decoding mechanism. */
-typedef enum _memoryWindow {CS_0_WINDOW = BIT0, CS_1_WINDOW = BIT1,
-			    CS_2_WINDOW = BIT2, CS_3_WINDOW = BIT3,
-			    DEVCS_0_WINDOW = BIT4, DEVCS_1_WINDOW = BIT5,
-			    DEVCS_2_WINDOW = BIT6, DEVCS_3_WINDOW = BIT7,
-			    BOOT_CS_WINDOW = BIT8, PCI_0_IO_WINDOW = BIT9,
-			    PCI_0_MEM0_WINDOW = BIT10,
-			    PCI_0_MEM1_WINDOW = BIT11,
-			    PCI_0_MEM2_WINDOW = BIT12,
-			    PCI_0_MEM3_WINDOW = BIT13, PCI_1_IO_WINDOW = BIT14,
-			    PCI_1_MEM0_WINDOW = BIT15, PCI_1_MEM1_WINDOW =BIT16,
-			    PCI_1_MEM2_WINDOW = BIT17, PCI_1_MEM3_WINDOW =BIT18,
-			    INTEGRATED_SRAM_WINDOW = BIT19,
-			    INTERNAL_SPACE_WINDOW = BIT20,
-			    ALL_WINDOWS = 0X1FFFFF
-			   } MEMORY_WINDOW;
-
-typedef enum _memoryWindowStatus {MEM_WINDOW_ENABLED,MEM_WINDOW_DISABLED
-				 } MEMORY_WINDOW_STATUS;
-
-
-typedef enum _pciMemWindow{PCI_0_IO,PCI_0_MEM0,PCI_0_MEM1,PCI_0_MEM2,PCI_0_MEM3
-#ifdef INCLUDE_PCI_1
-			  ,PCI_1_IO,PCI_1_MEM0,PCI_1_MEM1,PCI_1_MEM2,PCI_1_MEM3
-#endif /* INCLUDE_PCI_1 */
-			  } PCI_MEM_WINDOW;
-
-
-/* -------------------------------------------------------------------------------------------------*/
-
-/* functions */
-unsigned int memoryGetBankBaseAddress(MEMORY_BANK bank);
-unsigned int memoryGetDeviceBaseAddress(DEVICE device);
-/* New at MV6436x */
-unsigned int MemoryGetPciBaseAddr(PCI_MEM_WINDOW pciWindow);
-unsigned int memoryGetBankSize(MEMORY_BANK bank);
-unsigned int memoryGetDeviceSize(DEVICE device);
-unsigned int memoryGetDeviceWidth(DEVICE device);
-/* New at MV6436x */
-unsigned int gtMemoryGetPciWindowSize(PCI_MEM_WINDOW pciWindow);
-
-/* when given base Address and size Set new WINDOW for SCS_X. (X = 0,1,2 or 3*/
-bool memoryMapBank(MEMORY_BANK bank, unsigned int bankBase,unsigned int bankLength);
-/* Set a new base and size for one of the memory banks (CS0 - CS3) */
-bool gtMemorySetMemoryBank(MEMORY_BANK bank, unsigned int bankBase,
-			   unsigned int bankSize);
-bool memoryMapDeviceSpace(DEVICE device, unsigned int deviceBase,unsigned int deviceLength);
-
-/* Change the Internal Register Base Address to a new given Address. */
-bool memoryMapInternalRegistersSpace(unsigned int internalRegBase);
-/* returns internal Register Space Base Address. */
-unsigned int memoryGetInternalRegistersSpace(void);
-
-/* Returns the integrated SRAM Base Address. */
-unsigned int memoryGetInternalSramBaseAddr(void);
-/* -------------------------------------------------------------------------------------------------*/
-
-/* Set new base address for the integrated SRAM. */
-void memorySetInternalSramBaseAddr(unsigned int sramBaseAddress);
-/* -------------------------------------------------------------------------------------------------*/
-
-/* Delete a protection feature to a given space. */
-void memoryDisableProtectRegion(MEMORY_PROTECT_WINDOW window);
-/* -------------------------------------------------------------------------------------------------*/
-
-/* Writes a new remap value to the remap register */
-unsigned int memorySetPciRemapValue(PCI_MEM_WINDOW memoryWindow,
-				      unsigned int remapValueHigh,
-				      unsigned int remapValueLow);
-/* -------------------------------------------------------------------------------------------------*/
-
-/* Configurate the protection feature to a given space. */
-bool memorySetProtectRegion(MEMORY_PROTECT_WINDOW window,
-			      MEMORY_ACCESS gtMemoryAccess,
-			      MEMORY_ACCESS_WRITE gtMemoryWrite,
-			      MEMORY_CACHE_PROTECT cacheProtection,
-			      unsigned int baseAddress,
-			      unsigned int size);
-
-/* Configurate the protection feature to a given space. */
-/*bool memorySetProtectRegion(MEMORY_PROTECT_REGION region,
-			    MEMORY_ACCESS memoryAccess,
-			    MEMORY_ACCESS_WRITE memoryWrite,
-			    MEMORY_CACHE_PROTECT cacheProtection,
-			    unsigned int baseAddress,
-			    unsigned int regionLength); */
-/* Configurate the snoop feature to a given space. */
-bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region,
-			      MEMORY_SNOOP_TYPE snoopType,
-			      unsigned int baseAddress,
-			      unsigned int regionLength);
-
-bool memoryRemapAddress(unsigned int remapReg, unsigned int remapValue);
-bool memoryGetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
-bool memorySetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
-/* Set a new base and size for one of the PCI windows. */
-bool memorySetPciWindow(PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
-			  unsigned int pciWindowSize);
-
-/* Disable or enable one of the 21 windows dedicated for the CPU's
-   address decoding mechanism */
-void MemoryDisableWindow(MEMORY_WINDOW window);
-void MemoryEnableWindow (MEMORY_WINDOW window);
-MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus(MEMORY_WINDOW window);
-#endif	/* __INCmemoryh */
diff --git a/board/Marvell/include/mv_gen_reg.h b/board/Marvell/include/mv_gen_reg.h
deleted file mode 100644
index 5e4f07606c..0000000000
--- a/board/Marvell/include/mv_gen_reg.h
+++ /dev/null
@@ -1,2288 +0,0 @@
-/* mv_gen_reg.h - Internal registers definition file */
-/* Copyright - Galileo technology. */
-
-
-/*******************************************************************************
-*		    Copyright 2002, GALILEO TECHNOLOGY, LTD.		       *
-* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL.		       *
-* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT  *
-* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE	       *
-* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL.     *
-* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED,       *
-* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE.   *
-*									       *
-* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, *
-* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL    *
-* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K.  *
-* (MJKK), GALILEO TECHNOLOGY LTD. (GTL) AND GALILEO TECHNOLOGY, INC. (GTI).    *
-********************************************************************************
-* mv_gen_reg.h - Marvell 64360 and 64460 Internal registers definition file.
-*
-* DESCRIPTION:
-*	None.
-*
-* DEPENDENCIES:
-*	None.
-*
-*******************************************************************************/
-
-#ifndef __INCmv_gen_regh
-#define __INCmv_gen_regh
-
-
-/* Supported by the Atlantis */
-#define INCLUDE_PCI_1
-#define INCLUDE_PCI_0_ARBITER
-#define INCLUDE_PCI_1_ARBITER
-#define INCLUDE_SNOOP_SUPPORT
-#define INCLUDE_P2P
-#define INCLUDE_ETH_PORT_2
-#define INCLUDE_CPU_MAPPING
-#define INCLUDE_MPSC
-
-/* Not supported features */
-#undef	INCLUDE_CNTMR_4_7
-#undef	INCLUDE_DMA_4_7
-
-
-/****************************************/
-/* Processor Address Space				*/
-/****************************************/
-/* DDR SDRAM BAR and size registers */
-
-/* Sdram's BAR'S */
-#define SCS_0_LOW_DECODE_ADDRESS			0x008
-#define SCS_0_HIGH_DECODE_ADDRESS			0x010
-#define SCS_1_LOW_DECODE_ADDRESS			0x208
-#define SCS_1_HIGH_DECODE_ADDRESS			0x210
-#define SCS_2_LOW_DECODE_ADDRESS			0x018
-#define SCS_2_HIGH_DECODE_ADDRESS			0x020
-#define SCS_3_LOW_DECODE_ADDRESS			0x218
-#define SCS_3_HIGH_DECODE_ADDRESS			0x220
-
-/* Make it fit the MV64360 and MV64460 Lowlevel driver */
-#define CS_0_BASE_ADDR			SCS_0_LOW_DECODE_ADDRESS
-#define CS_0_SIZE			SCS_0_HIGH_DECODE_ADDRESS
-#define CS_1_BASE_ADDR		SCS_1_LOW_DECODE_ADDRESS
-#define CS_1_SIZE			SCS_1_HIGH_DECODE_ADDRESS
-#define CS_2_BASE_ADDR		SCS_2_LOW_DECODE_ADDRESS
-#define CS_2_SIZE			SCS_2_HIGH_DECODE_ADDRESS
-#define CS_3_BASE_ADDR		SCS_3_LOW_DECODE_ADDRESS
-#define CS_3_SIZE			SCS_3_HIGH_DECODE_ADDRESS
-
-/* Devices BAR'S */
-#define CS_0_LOW_DECODE_ADDRESS			0x028
-#define CS_0_HIGH_DECODE_ADDRESS			0x030
-#define CS_1_LOW_DECODE_ADDRESS			0x228
-#define CS_1_HIGH_DECODE_ADDRESS			0x230
-#define CS_2_LOW_DECODE_ADDRESS			0x248
-#define CS_2_HIGH_DECODE_ADDRESS			0x250
-#define CS_3_LOW_DECODE_ADDRESS			0x038
-#define CS_3_HIGH_DECODE_ADDRESS			0x040
-#define BOOTCS_LOW_DECODE_ADDRESS			0x238
-#define BOOTCS_HIGH_DECODE_ADDRESS			0x240
-
-/* Make it fit the MV64360 and MV64460 Lowlevel driver */
-/* Devices BAR and size registers */
-
-#define DEV_CS0_BASE_ADDR	CS_0_LOW_DECODE_ADDRESS
-#define DEV_CS0_SIZE			CS_0_HIGH_DECODE_ADDRESS
-#define DEV_CS1_BASE_ADDR	CS_1_LOW_DECODE_ADDRESS
-#define DEV_CS1_SIZE		CS_1_HIGH_DECODE_ADDRESS
-#define DEV_CS2_BASE_ADDR	CS_2_LOW_DECODE_ADDRESS
-#define DEV_CS2_SIZE			CS_2_HIGH_DECODE_ADDRESS
-#define DEV_CS3_BASE_ADDR		CS_3_LOW_DECODE_ADDRESS
-#define DEV_CS3_SIZE		CS_3_HIGH_DECODE_ADDRESS
-#define BOOTCS_BASE_ADDR	BOOTCS_LOW_DECODE_ADDRESS
-#define BOOTCS_SIZE		BOOTCS_HIGH_DECODE_ADDRESS
-
-/* PCI 0 BAR and size registers	 old names of evb64260*/
-
-#define PCI_0I_O_LOW_DECODE_ADDRESS			0x048
-#define PCI_0I_O_HIGH_DECODE_ADDRESS			0x050
-#define PCI_0MEMORY0_LOW_DECODE_ADDRESS		0x058
-#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS		0x060
-#define PCI_0MEMORY1_LOW_DECODE_ADDRESS		0x080
-#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS		0x088
-#define PCI_0MEMORY2_LOW_DECODE_ADDRESS		0x258
-#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS		0x260
-#define PCI_0MEMORY3_LOW_DECODE_ADDRESS		0x280
-#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS		0x288
-
-/* Make it fit the MV64360 and MV64460 Lowlevel driver */
-#define PCI_0_IO_BASE_ADDR						0x048
-#define PCI_0_IO_SIZE							0x050
-#define PCI_0_MEMORY0_BASE_ADDR					0x058
-#define PCI_0_MEMORY0_SIZE						0x060
-#define PCI_0_MEMORY1_BASE_ADDR					0x080
-#define PCI_0_MEMORY1_SIZE						0x088
-#define PCI_0_MEMORY2_BASE_ADDR					0x258
-#define PCI_0_MEMORY2_SIZE						0x260
-#define PCI_0_MEMORY3_BASE_ADDR					0x280
-#define PCI_0_MEMORY3_SIZE						0x288
-
-/* PCI 1 BAR and size registers	 old names of evb64260*/
-#define PCI_1I_O_LOW_DECODE_ADDRESS			0x090
-#define PCI_1I_O_HIGH_DECODE_ADDRESS			0x098
-#define PCI_1MEMORY0_LOW_DECODE_ADDRESS		0x0a0
-#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS		0x0a8
-#define PCI_1MEMORY1_LOW_DECODE_ADDRESS		0x0b0
-#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS		0x0b8
-#define PCI_1MEMORY2_LOW_DECODE_ADDRESS		0x2a0
-#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS		0x2a8
-#define PCI_1MEMORY3_LOW_DECODE_ADDRESS		0x2b0
-#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS		0x2b8
-
-/* Make it fit the MV64360 and MV64460 Lowlevel driver */
-#define PCI_1_IO_BASE_ADDR						0x090
-#define PCI_1_IO_SIZE							0x098
-#define PCI_1_MEMORY0_BASE_ADDR					0x0a0
-#define PCI_1_MEMORY0_SIZE						0x0a8
-#define PCI_1_MEMORY1_BASE_ADDR					0x0b0
-#define PCI_1_MEMORY1_SIZE						0x0b8
-#define PCI_1_MEMORY2_BASE_ADDR					0x2a0
-#define PCI_1_MEMORY2_SIZE						0x2a8
-#define PCI_1_MEMORY3_BASE_ADDR					0x2b0
-#define PCI_1_MEMORY3_SIZE						0x2b8
-
-/* internal registers space base address */
-#define INTERNAL_SPACE_DECODE				0x068
-#define INTERNAL_SPACE_BASE_ADDR				INTERNAL_SPACE_DECODE
-
-/* SRAM base address */
-#define INTEGRATED_SRAM_BASE_ADDR				0x268
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1
-   windows above */
-#define BASE_ADDR_ENABLE						0x278
-
-
-#define CPU_0_LOW_DECODE_ADDRESS				0x290
-#define CPU_0_HIGH_DECODE_ADDRESS				0x298
-#define CPU_1_LOW_DECODE_ADDRESS				0x2c0
-#define CPU_1_HIGH_DECODE_ADDRESS				0x2c8
-
-/****************************************/
-/* PCI remap registers			*/
-/****************************************/
-/*****************************************************************************************/
-      /* PCI 0 */
-/* old fashion evb 64260 */
-#define PCI_0I_O_ADDRESS_REMAP				0x0f0
-#define PCI_0MEMORY0_ADDRESS_REMAP			0x0f8
-#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP		0x320
-#define PCI_0MEMORY1_ADDRESS_REMAP			0x100
-#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP		0x328
-#define PCI_0MEMORY2_ADDRESS_REMAP			0x2f8
-#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP		0x330
-#define PCI_0MEMORY3_ADDRESS_REMAP			0x300
-#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP		0x338
-
-#define PCI_0_IO_ADDR_REMAP						PCI_0I_O_ADDRESS_REMAP
-#define PCI_0_MEMORY0_LOW_ADDR_REMAP				PCI_0MEMORY0_ADDRESS_REMAP
-#define PCI_0_MEMORY0_HIGH_ADDR_REMAP				PCI_0MEMORY0_HIGH_ADDRESS_REMAP
-#define PCI_0_MEMORY1_LOW_ADDR_REMAP				PCI_0MEMORY1_ADDRESS_REMAP
-#define PCI_0_MEMORY1_HIGH_ADDR_REMAP				PCI_0MEMORY1_HIGH_ADDRESS_REMAP
-#define PCI_0_MEMORY2_LOW_ADDR_REMAP				PCI_0MEMORY2_ADDRESS_REMAP
-#define PCI_0_MEMORY2_HIGH_ADDR_REMAP				PCI_0MEMORY2_HIGH_ADDRESS_REMAP
-#define PCI_0_MEMORY3_LOW_ADDR_REMAP				PCI_0MEMORY3_ADDRESS_REMAP
-#define PCI_0_MEMORY3_HIGH_ADDR_REMAP				PCI_0MEMORY3_HIGH_ADDRESS_REMAP
-
-       /* PCI 1 */
-/* old fashion evb 64260 */
-#define PCI_1I_O_ADDRESS_REMAP				0x108
-#define PCI_1MEMORY0_ADDRESS_REMAP			0x110
-#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP		0x340
-#define PCI_1MEMORY1_ADDRESS_REMAP			0x118
-#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP		0x348
-#define PCI_1MEMORY2_ADDRESS_REMAP			0x310
-#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP		0x350
-#define PCI_1MEMORY3_ADDRESS_REMAP			0x318
-#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP		0x358
-
-#define PCI_1_IO_ADDR_REMAP						PCI_1I_O_ADDRESS_REMAP
-#define PCI_1_MEMORY0_LOW_ADDR_REMAP				PCI_1MEMORY0_ADDRESS_REMAP
-#define PCI_1_MEMORY0_HIGH_ADDR_REMAP				PCI_1MEMORY0_HIGH_ADDRESS_REMAP
-#define PCI_1_MEMORY1_LOW_ADDR_REMAP				PCI_1MEMORY1_ADDRESS_REMAP
-#define PCI_1_MEMORY1_HIGH_ADDR_REMAP				PCI_1MEMORY1_HIGH_ADDRESS_REMAP
-#define PCI_1_MEMORY2_LOW_ADDR_REMAP				PCI_1MEMORY2_ADDRESS_REMAP
-#define PCI_1_MEMORY2_HIGH_ADDR_REMAP				PCI_1MEMORY2_HIGH_ADDRESS_REMAP
-#define PCI_1_MEMORY3_LOW_ADDR_REMAP				PCI_1MEMORY3_ADDRESS_REMAP
-#define PCI_1_MEMORY3_HIGH_ADDR_REMAP				PCI_1MEMORY3_HIGH_ADDRESS_REMAP
-
-/* old fashion evb 64260 */
-#define CPU_PCI_0_HEADERS_RETARGET_CONTROL			0x3b0
-#define CPU_PCI_0_HEADERS_RETARGET_BASE				0x3b8
-#define CPU_PCI_1_HEADERS_RETARGET_CONTROL			0x3c0
-#define CPU_PCI_1_HEADERS_RETARGET_BASE				0x3c8
-#define CPU_GE_HEADERS_RETARGET_CONTROL				0x3d0
-#define CPU_GE_HEADERS_RETARGET_BASE				0x3d8
-
-/* MV64360 and MV64460 no changes needed*/
-/*****************************************************************************************/
-
-/****************************************/
-/*	   CPU Control Registers	*/
-/****************************************/
-/* CPU MASTER CONTROL REGISTER */
-#define CPU_CONFIGURATION				0x000
-#define CPU_MASTER_CONTROL				0x160
-
-#define CPU_CONFIG							0x000
-#define CPU_MODE							0x120
-#define CPU_MASTER_CONTROL						0x160
-/* new in MV64360 and MV64460 */
-#define CPU_CROSS_BAR_CONTROL_LOW				0x150
-#define CPU_CROSS_BAR_CONTROL_HIGH				0x158
-#define CPU_CROSS_BAR_TIMEOUT					0x168
-
-/****************************************/
-/* SMP RegisterS			*/
-/****************************************/
-
-#define SMP_WHO_AM_I							0x200
-#define SMP_CPU0_DOORBELL						0x214
-#define SMP_CPU0_DOORBELL_CLEAR					0x21C
-#define SMP_CPU1_DOORBELL						0x224
-#define SMP_CPU1_DOORBELL_CLEAR					0x22C
-#define SMP_CPU0_DOORBELL_MASK					0x234
-#define SMP_CPU1_DOORBELL_MASK					0x23C
-#define SMP_SEMAPHOR0							0x244
-#define SMP_SEMAPHOR1							0x24c
-#define SMP_SEMAPHOR2							0x254
-#define SMP_SEMAPHOR3							0x25c
-#define SMP_SEMAPHOR4							0x264
-#define SMP_SEMAPHOR5							0x26c
-#define SMP_SEMAPHOR6							0x274
-#define SMP_SEMAPHOR7							0x27c
-
-
-/****************************************/
-/* CPU Sync Barrier				*/
-/****************************************/
-#define CPU_0_SYNC_BARRIER_TRIGGER				0x0c0
-#define CPU_0_SYNC_BARRIER_VIRTUAL				0x0c8
-#define CPU_1_SYNC_BARRIER_TRIGGER				0x0d0
-#define CPU_1_SYNC_BARRIER_VIRTUAL				0x0d8
-
-
-/****************************************/
-/* CPU Access Protect			*/
-/****************************************/
-
-#define CPU_LOW_PROTECT_ADDRESS_0			    0x180
-#define CPU_HIGH_PROTECT_ADDRESS_0			    0x188
-#define CPU_LOW_PROTECT_ADDRESS_1			    0x190
-#define CPU_HIGH_PROTECT_ADDRESS_1			    0x198
-#define CPU_LOW_PROTECT_ADDRESS_2			    0x1a0
-#define CPU_HIGH_PROTECT_ADDRESS_2			    0x1a8
-#define CPU_LOW_PROTECT_ADDRESS_3			    0x1b0
-#define CPU_HIGH_PROTECT_ADDRESS_3			    0x1b8
-/*#define CPU_LOW_PROTECT_ADDRESS_4			      0x1c0
-#define CPU_HIGH_PROTECT_ADDRESS_4			    0x1c8
-#define CPU_LOW_PROTECT_ADDRESS_5			    0x1d0
-#define CPU_HIGH_PROTECT_ADDRESS_5			    0x1d8
-#define CPU_LOW_PROTECT_ADDRESS_6			    0x1e0
-#define CPU_HIGH_PROTECT_ADDRESS_6			    0x1e8
-#define CPU_LOW_PROTECT_ADDRESS_7			    0x1f0
-#define CPU_HIGH_PROTECT_ADDRESS_7			    0x1f8
-*/
-
-#define CPU_PROTECT_WINDOW_0_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_0 /* 0x180 */
-#define CPU_PROTECT_WINDOW_0_SIZE			    CPU_HIGH_PROTECT_ADDRESS_0 /* 0x188 */
-#define CPU_PROTECT_WINDOW_1_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_1 /* 0x190 */
-#define CPU_PROTECT_WINDOW_1_SIZE			    CPU_HIGH_PROTECT_ADDRESS_1 /* 0x198 */
-#define CPU_PROTECT_WINDOW_2_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_2 /*0x1a0 */
-#define CPU_PROTECT_WINDOW_2_SIZE			    CPU_HIGH_PROTECT_ADDRESS_2 /* 0x1a8 */
-#define CPU_PROTECT_WINDOW_3_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_3 /* 0x1b0 */
-#define CPU_PROTECT_WINDOW_3_SIZE			    CPU_HIGH_PROTECT_ADDRESS_3 /* 0x1b8 */
-
-
-/****************************************/
-/*	    Snoop Control			*/
-/****************************************/
-
-/*#define SNOOP_BASE_ADDRESS_0				      0x380
-#define SNOOP_TOP_ADDRESS_0				    0x388
-#define SNOOP_BASE_ADDRESS_1				    0x390
-#define SNOOP_TOP_ADDRESS_1				    0x398
-#define SNOOP_BASE_ADDRESS_2				    0x3a0
-#define SNOOP_TOP_ADDRESS_2				    0x3a8
-#define SNOOP_BASE_ADDRESS_3				    0x3b0
-#define SNOOP_TOP_ADDRESS_3				    0x3b8
-*/
-
-/****************************************/
-/*  Integrated SRAM Registers		*/
-/****************************************/
-
-#define SRAM_CONFIG						0x380
-#define SRAM_TEST_MODE						0x3F4
-#define SRAM_ERROR_CAUSE					0x388
-#define SRAM_ERROR_ADDR						0x390
-#define SRAM_ERROR_ADDR_HIGH					0x3F8
-#define SRAM_ERROR_DATA_LOW					0x398
-#define SRAM_ERROR_DATA_HIGH					0x3a0
-#define SRAM_ERROR_DATA_PARITY					0x3a8
-
-/****************************************/
-/*	    CPU Error Report			*/
-/****************************************/
-
-#define CPU_ERROR_ADDRESS_LOW		0x070
-#define CPU_ERROR_ADDRESS_HIGH		0x078
-#define CPU_ERROR_DATA_LOW					0x128
-#define CPU_ERROR_DATA_HIGH					0x130
-#define CPU_ERROR_PARITY					0x138
-#define CPU_ERROR_CAUSE						0x140
-#define CPU_ERROR_MASK						0x148
-
-#define CPU_ERROR_ADDR_LOW					CPU_ERROR_ADDRESS_LOW  /* 0x0701 */
-#define CPU_ERROR_ADDR_HIGH					CPU_ERROR_ADDRESS_HIGH	/* 0x0781 */
-
-/****************************************/
-/*	    Pslave Debug			*/
-/*	CPU Interface Debug Registers	*/
-/****************************************/
-
-#define X_0_ADDRESS						0x360
-#define X_0_COMMAND_ID						0x368
-#define X_1_ADDRESS						0x370
-#define X_1_COMMAND_ID						0x378
- /*#define WRITE_DATA_LOW					0x3c01 */
- /*#define WRITE_DATA_HIGH					0x3c81 */
- /*#define WRITE_BYTE_ENABLE					0x3e01 */
- /*#define READ_DATA_LOW					0x3d01 */
- /*#define READ_DATA_HIGH					0x3d81 */
- /*#define READ_ID						0x3e81 */
-
-#define PUNIT_SLAVE_DEBUG_LOW					X_0_ADDRESS  /* 0x3601 */
-#define PUNIT_SLAVE_DEBUG_HIGH					X_0_COMMAND_ID	/* 0x3681 */
-#define PUNIT_MASTER_DEBUG_LOW					X_1_ADDRESS  /* 0x3701 */
-#define PUNIT_MASTER_DEBUG_HIGH				   X_1_COMMAND_ID  /* 0x3781 */
-#define PUNIT_MMASK						0x3e4
-
-
-/****************************************/
-/* SDRAM and Device Address Space		*/
-/****************************************/
-
-/****************************************/
-/* SDRAM Configuration			*/
-/****************************************/
-#define SDRAM_CONFIG						0x1400	/* MV64260 0x448 some changes*/
-#define D_UNIT_CONTROL_LOW					0x1404	/* NEW in MV64360 and MV64460 */
-#define D_UNIT_CONTROL_HIGH					0x1424	/* NEW in MV64360 and MV64460 */
-#define SDRAM_TIMING_CONTROL_LOW			0x1408	/* MV64260 0x4b4 new SDRAM TIMING REGISTER */
-#define SDRAM_TIMING_CONTROL_HIGH			0x140c	/* MV64260 0x4b4 new SDRAM TIMING REGISTER */
-#define SDRAM_ADDR_CONTROL				    0x1410	/* MV64260 0x47c some changes*/
-#define SDRAM_OPEN_PAGES_CONTROL			0x1414	/* NEW in MV64360 and MV64460 */
-#define SDRAM_OPERATION						0x1418	/* MV64260 0x474 some changes*/
-#define SDRAM_MODE						0x141c	/* NEW in MV64360 and MV64460 */
-#define EXTENDED_DRAM_MODE					0x1420	/* NEW in MV64360 and MV64460 */
-#define SDRAM_CROSS_BAR_CONTROL_LOW			0x1430	/* MV64260 0x4a8 NO changes*/
-#define SDRAM_CROSS_BAR_CONTROL_HIGH			0x1434	/* MV64260 0x4ac NO changes*/
-#define SDRAM_CROSS_BAR_TIMEOUT				0x1438	/* MV64260 0x4b0 NO changes*/
-#define SDRAM_ADDR_CTRL_PADS_CALIBRATION	0x14c0	/* what is this ??? */
-#define SDRAM_DATA_PADS_CALIBRATION			0x14c4	/* what is this ??? */
-/****************************************/
-/* SDRAM Configuration MV64260			*/
-/****************************************/
- /*#define SDRAM_CONFIGURATION			0x4481 */
- /*#define SDRAM_OPERATION_MODE			0x4741 */
- /*#define SDRAM_ADDRESS_DECODE		0x47c1 */
- /*#define SDRAM_UMA_CONTROL			0x4a4	eliminated in MV64360 and MV64460 */
- /*#define SDRAM_CROSS_BAR_CONTROL_LOW	0x4a81 */
- /*#define SDRAM_CROSS_BAR_CONTROL_HIGH 0x4ac1 */
- /*#define SDRAM_CROSS_BAR_TIMEOUT		0x4b01 */
- /*#define SDRAM_TIMING				0x4b41 */
-
-
-/****************************************/
-/* SDRAM Error Report			*/
-/****************************************/
-#define SDRAM_ERROR_DATA_LOW				0x1444	/* MV64260 0x484 NO changes*/
-#define SDRAM_ERROR_DATA_HIGH					0x1440	/* MV64260 0x480 NO changes*/
-#define SDRAM_ERROR_ADDR					0x1450	/* MV64260 0x490 NO changes*/
-#define SDRAM_RECEIVED_ECC					0x1448	/* MV64260 0x488 NO changes*/
-#define SDRAM_CALCULATED_ECC					0x144c	/* MV64260 0x48c NO changes*/
-#define SDRAM_ECC_CONTROL					0x1454	/* MV64260 0x494 NO changes*/
-#define SDRAM_ECC_ERROR_COUNTER				0x1458	/* MV64260 0x498 NO changes*/
-#define SDRAM_MMASK					0x1B40	/* NEW Register in MV64360 and MV64460 DO NOT USE !!!*/
-/****************************************/
-/* SDRAM Error Report MV64260			*/
-/****************************************/
- /*#define SDRAM_ERROR_DATA_LOW					0x4841 */
- /*#define SDRAM_ERROR_DATA_HIGH				0x4801 */
- /*#define SDRAM_AND_DEVICE_ERROR_ADDRESS		0x4901 */
- /*#define SDRAM_RECEIVED_ECC				       0x4881 */
- /*#define SDRAM_CALCULATED_ECC					0x48c1 */
- /*#define SDRAM_ECC_CONTROL					0x4941 */
- /*#define SDRAM_ECC_ERROR_COUNTER			0x4981 */
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-#define DFCDL_CONFIG0						0x1480
-#define DFCDL_CONFIG1						0x1484
-#define DLL_WRITE						0x1488
-#define DLL_READ						0x148c
-#define SRAM_ADDR						0x1490
-#define SRAM_DATA0						0x1494
-#define SRAM_DATA1						0x1498
-#define SRAM_DATA2						0x149c
-#define DFCL_PROBE						0x14a0
-
-
-/****************************************/
-/* SDRAM Parameters only in MV64260			*/
-/****************************************/
-
- /*#define SDRAM_BANK0PARAMETERS				0x44C	eliminated in MV64360 and MV64460 */
- /*#define SDRAM_BANK1PARAMETERS				0x450	eliminated in MV64360 and MV64460 */
- /*#define SDRAM_BANK2PARAMETERS				0x454	eliminated in MV64360 and MV64460 */
- /*#define SDRAM_BANK3PARAMETERS				0x458	eliminated in MV64360 and MV64460 */
-
-/******************************************/
-/*   Debug Registers			  */
-/******************************************/
-
-#define DUNIT_DEBUG_LOW						0x1460
-#define DUNIT_DEBUG_HIGH					0x1464
-#define DUNIT_MMASK						0x1b40
-
-/****************************************/
-/* SDunit Debug (for internal use)	*/
-/****************************************/
-
-#define X0_ADDRESS					    0x500
-#define X0_COMMAND_AND_ID				    0x504
-#define X0_WRITE_DATA_LOW				    0x508
-#define X0_WRITE_DATA_HIGH				    0x50c
-#define X0_WRITE_BYTE_ENABLE				    0x518
-#define X0_READ_DATA_LOW				    0x510
-#define X0_READ_DATA_HIGH				    0x514
-#define X0_READ_ID					    0x51c
-#define X1_ADDRESS					    0x520
-#define X1_COMMAND_AND_ID				    0x524
-#define X1_WRITE_DATA_LOW				    0x528
-#define X1_WRITE_DATA_HIGH				    0x52c
-#define X1_WRITE_BYTE_ENABLE				    0x538
-#define X1_READ_DATA_LOW				    0x530
-#define X1_READ_DATA_HIGH				    0x534
-#define X1_READ_ID					    0x53c
-#define X0_SNOOP_ADDRESS				    0x540
-#define X0_SNOOP_COMMAND				    0x544
-#define X1_SNOOP_ADDRESS				    0x548
-#define X1_SNOOP_COMMAND				    0x54c
-
-/****************************************/
-/* Device Parameters					*/
-/****************************************/
-
-#define DEVICE_BANK0PARAMETERS				0x45c
-#define DEVICE_BANK1PARAMETERS				0x460
-#define DEVICE_BANK2PARAMETERS				0x464
-#define DEVICE_BANK3PARAMETERS				0x468
-#define DEVICE_BOOT_BANK_PARAMETERS			0x46c
-#define DEVICE_CONTROL							0x4c0
-#define DEVICE_CROSS_BAR_CONTROL_LOW				0x4c8
-#define DEVICE_CROSS_BAR_CONTROL_HIGH				0x4cc
-#define DEVICE_CROSS_BAR_TIMEOUT				0x4c4
-
-/****************************************/
-/* Device Parameters					*/
-/****************************************/
-
-#define DEVICE_BANK0_PARAMETERS			DEVICE_BANK0PARAMETERS	/* 0x45c1 */
-#define DEVICE_BANK1_PARAMETERS			DEVICE_BANK1PARAMETERS	/* 0x4601 */
-#define DEVICE_BANK2_PARAMETERS			DEVICE_BANK2PARAMETERS	/* 0x4641 */
-#define DEVICE_BANK3_PARAMETERS			DEVICE_BANK3PARAMETERS	/* 0x4681 */
-/*#define DEVICE_BOOT_BANK_PARAMETERS			 0x46c1 */
-#define DEVICE_INTERFACE_CONTROL				DEVICE_CONTROL	/* 0x4c01 */
-#define DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		DEVICE_CROSS_BAR_CONTROL_LOW  /* 0x4c81 */
-#define DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		DEVICE_CROSS_BAR_CONTROL_HIGH  /* 0x4cc1 */
-#define DEVICE_INTERFACE_CROSS_BAR_TIMEOUT			DEVICE_CROSS_BAR_TIMEOUT  /* 0x4c41 */
-
-
-/****************************************/
-/* Device Interrupt					*/
-/****************************************/
-
-#define DEVICE_INTERRUPT_CAUSE						0x4d0
-#define DEVICE_INTERRUPT_MASK						0x4d4
-#define DEVICE_ERROR_ADDRESS						0x4d8
- /*#define DEVICE_INTERRUPT_CAUSE				0x4d01 */
- /*#define DEVICE_INTERRUPT_MASK				0x4d41 */
-#define DEVICE_ERROR_ADDR				DEVICE_ERROR_ADDRESS  /*0x4d81 */
-#define DEVICE_ERROR_DATA				0x4dc
-#define DEVICE_ERROR_PARITY					0x4e0
-
-/****************************************/
-/* Device debug registers			*/
-/****************************************/
-
-#define DEVICE_DEBUG_LOW					0x4e4
-#define DEVICE_DEBUG_HIGH				0x4e8
-#define RUNIT_MMASK							0x4f0
-
-/****************************************/
-/* DMA Record							*/
-/****************************************/
-
- /*#define CHANNEL4_DMA_BYTE_COUNT			0x9001 */
- /*#define CHANNEL5_DMA_BYTE_COUNT			0x9041 */
- /*#define CHANNEL6_DMA_BYTE_COUNT			0x9081 */
- /*#define CHANNEL7_DMA_BYTE_COUNT			0x90C1 */
- /*#define CHANNEL4_DMA_SOURCE_ADDRESS		0x9101 */
- /*#define CHANNEL5_DMA_SOURCE_ADDRESS		0x9141 */
- /*#define CHANNEL6_DMA_SOURCE_ADDRESS		0x9181 */
- /*#define CHANNEL7_DMA_SOURCE_ADDRESS		0x91C1 */
- /*#define CHANNEL4_DMA_DESTINATION_ADDRESS		0x9201 */
- /*#define CHANNEL5_DMA_DESTINATION_ADDRESS		0x9241 */
- /*#define CHANNEL6_DMA_DESTINATION_ADDRESS		0x9281 */
- /*#define CHANNEL7_DMA_DESTINATION_ADDRESS		0x92C1 */
- /*#define CHANNEL4NEXT_RECORD_POINTER			0x9301 */
- /*#define CHANNEL5NEXT_RECORD_POINTER			0x9341 */
- /*#define CHANNEL6NEXT_RECORD_POINTER			0x9381 */
- /*#define CHANNEL7NEXT_RECORD_POINTER			0x93C1 */
- /*#define CHANNEL4CURRENT_DESCRIPTOR_POINTER		0x9701 */
- /*#define CHANNEL5CURRENT_DESCRIPTOR_POINTER		0x9741 */
- /*#define CHANNEL6CURRENT_DESCRIPTOR_POINTER		0x9781 */
- /*#define CHANNEL7CURRENT_DESCRIPTOR_POINTER		0x97C1 */
- /*#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8901 */
- /*#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8941 */
- /*#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8981 */
- /*#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x89c1 */
- /*#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9901 */
- /*#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9941 */
- /*#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9981 */
- /*#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x99c1 */
- /*#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a01 */
- /*#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a41 */
- /*#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a81 */
- /*#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8ac1 */
- /*#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a01 */
- /*#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a41 */
- /*#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a81 */
- /*#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9ac1 */
- /*#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b01 */
- /*#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b41 */
- /*#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b81 */
- /*#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8bc1 */
- /*#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b01 */
- /*#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b41 */
- /*#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b81 */
- /*#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9bc1 */
-
-/****************************************/
-/* DMA Channel Control					*/
-/****************************************/
-
-#define CHANNEL0CONTROL					0x840
-#define CHANNEL0CONTROL_HIGH				0x880
-#define CHANNEL1CONTROL					0x844
-#define CHANNEL1CONTROL_HIGH				0x884
-#define CHANNEL2CONTROL					0x848
-#define CHANNEL2CONTROL_HIGH				0x888
-#define CHANNEL3CONTROL					0x84C
-#define CHANNEL3CONTROL_HIGH				0x88C
-
-#define DMA_CHANNEL0_CONTROL				CHANNEL0CONTROL	 /*0x8401 */
-#define DMA_CHANNEL0_CONTROL_HIGH			CHANNEL0CONTROL_HIGH  /*0x8801 */
-#define DMA_CHANNEL1_CONTROL				CHANNEL1CONTROL	 /* 0x8441 */
-#define DMA_CHANNEL1_CONTROL_HIGH			CHANNEL1CONTROL_HIGH  /*0x8841 */
-#define DMA_CHANNEL2_CONTROL				CHANNEL2CONTROL	 /*0x8481 */
-#define DMA_CHANNEL2_CONTROL_HIGH			CHANNEL2CONTROL_HIGH  /*0x8881 */
-#define DMA_CHANNEL3_CONTROL				CHANNEL3CONTROL	 /*0x84C1 */
-#define DMA_CHANNEL3_CONTROL_HIGH			CHANNEL3CONTROL_HIGH  /*0x88C1 */
-
- /*#define CHANNEL4CONTROL				0x9401 */
- /*#define CHANNEL4CONTROL_HIGH				0x9801 */
- /*#define CHANNEL5CONTROL				0x9441 */
- /*#define CHANNEL5CONTROL_HIGH				0x9841 */
- /*#define CHANNEL6CONTROL				0x9481 */
- /*#define CHANNEL6CONTROL_HIGH				0x9881 */
- /*#define CHANNEL7CONTROL				0x94C1 */
- /*#define CHANNEL7CONTROL_HIGH				0x98C1 */
-
-
-/****************************************/
-/* DMA Arbiter							*/
-/****************************************/
-
- /*#define ARBITER_CONTROL_0_3				0x8601 */
-#define ARBITER_CONTROL_4_7				0x960
-/****************************************/
-/*	     IDMA Registers		*/
-/****************************************/
-
-#define DMA_CHANNEL0_BYTE_COUNT					CHANNEL0_DMA_BYTE_COUNT	 /*0x8001 */
-#define DMA_CHANNEL1_BYTE_COUNT					CHANNEL1_DMA_BYTE_COUNT	 /*0x8041 */
-#define DMA_CHANNEL2_BYTE_COUNT					CHANNEL2_DMA_BYTE_COUNT	 /*0x8081 */
-#define DMA_CHANNEL3_BYTE_COUNT					CHANNEL3_DMA_BYTE_COUNT	 /*0x80C1 */
-#define DMA_CHANNEL0_SOURCE_ADDR				CHANNEL0_DMA_SOURCE_ADDRESS  /*0x8101 */
-#define DMA_CHANNEL1_SOURCE_ADDR				CHANNEL1_DMA_SOURCE_ADDRESS  /*0x8141 */
-#define DMA_CHANNEL2_SOURCE_ADDR				CHANNEL2_DMA_SOURCE_ADDRESS  /*0x8181 */
-#define DMA_CHANNEL3_SOURCE_ADDR				CHANNEL3_DMA_SOURCE_ADDRESS  /*0x81c1 */
-#define DMA_CHANNEL0_DESTINATION_ADDR				CHANNEL0_DMA_DESTINATION_ADDRESS  /*0x8201 */
-#define DMA_CHANNEL1_DESTINATION_ADDR				CHANNEL1_DMA_DESTINATION_ADDRESS  /*0x8241 */
-#define DMA_CHANNEL2_DESTINATION_ADDR				CHANNEL2_DMA_DESTINATION_ADDRESS  /*0x8281 */
-#define DMA_CHANNEL3_DESTINATION_ADDR				CHANNEL3_DMA_DESTINATION_ADDRESS  /*0x82C1 */
-#define DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		CHANNEL0NEXT_RECORD_POINTER  /*0x8301 */
-#define DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		CHANNEL1NEXT_RECORD_POINTER  /*0x8341 */
-#define DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		CHANNEL2NEXT_RECORD_POINTER  /*0x8381 */
-#define DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		CHANNEL3NEXT_RECORD_POINTER  /*0x83C1 */
-#define DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		CHANNEL0CURRENT_DESCRIPTOR_POINTER  /*0x8701 */
-#define DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		CHANNEL1CURRENT_DESCRIPTOR_POINTER  /*0x8741 */
-#define DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		CHANNEL2CURRENT_DESCRIPTOR_POINTER  /*0x8781 */
-#define DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		CHANNEL3CURRENT_DESCRIPTOR_POINTER  /*0x87C1 */
-
-#define CHANNEL3CURRENT_DESCRIPTOR_POINTER		0x87C
-#define CHANNEL2CURRENT_DESCRIPTOR_POINTER		0x878
-#define CHANNEL1CURRENT_DESCRIPTOR_POINTER		0x874
-#define CHANNEL0CURRENT_DESCRIPTOR_POINTER		0x870
-#define CHANNEL0NEXT_RECORD_POINTER			0x830
-#define CHANNEL1NEXT_RECORD_POINTER			0x834
-#define CHANNEL2NEXT_RECORD_POINTER			0x838
-#define CHANNEL3NEXT_RECORD_POINTER			0x83C
-#define CHANNEL0_DMA_DESTINATION_ADDRESS		0x820
-#define CHANNEL1_DMA_DESTINATION_ADDRESS		0x824
-#define CHANNEL2_DMA_DESTINATION_ADDRESS		0x828
-#define CHANNEL3_DMA_DESTINATION_ADDRESS		0x82C
-#define CHANNEL0_DMA_SOURCE_ADDRESS			0x810
-#define CHANNEL1_DMA_SOURCE_ADDRESS			0x814
-#define CHANNEL2_DMA_SOURCE_ADDRESS			0x818
-#define CHANNEL3_DMA_SOURCE_ADDRESS			0x81C
-#define CHANNEL0_DMA_BYTE_COUNT			0x800
-#define CHANNEL1_DMA_BYTE_COUNT			0x804
-#define CHANNEL2_DMA_BYTE_COUNT			0x808
-#define CHANNEL3_DMA_BYTE_COUNT			0x80C
-
- /*  IDMA Address Decoding Base Address Registers  */
-
-#define DMA_BASE_ADDR_REG0						0xa00
-#define DMA_BASE_ADDR_REG1						0xa08
-#define DMA_BASE_ADDR_REG2						0xa10
-#define DMA_BASE_ADDR_REG3						0xa18
-#define DMA_BASE_ADDR_REG4						0xa20
-#define DMA_BASE_ADDR_REG5						0xa28
-#define DMA_BASE_ADDR_REG6						0xa30
-#define DMA_BASE_ADDR_REG7						0xa38
-
- /*  IDMA Address Decoding Size Address Register   */
-
-#define DMA_SIZE_REG0							0xa04
-#define DMA_SIZE_REG1							0xa0c
-#define DMA_SIZE_REG2							0xa14
-#define DMA_SIZE_REG3							0xa1c
-#define DMA_SIZE_REG4							0xa24
-#define DMA_SIZE_REG5							0xa2c
-#define DMA_SIZE_REG6							0xa34
-#define DMA_SIZE_REG7							0xa3C
-
-    /* IDMA Address Decoding High Address Remap and Access
-		  Protection Registers			  */
-
-#define DMA_HIGH_ADDR_REMAP_REG0				0xa60
-#define DMA_HIGH_ADDR_REMAP_REG1				0xa64
-#define DMA_HIGH_ADDR_REMAP_REG2				0xa68
-#define DMA_HIGH_ADDR_REMAP_REG3				0xa6C
-#define DMA_BASE_ADDR_ENABLE_REG				0xa80
-#define DMA_CHANNEL0_ACCESS_PROTECTION_REG		0xa70
-#define DMA_CHANNEL1_ACCESS_PROTECTION_REG		   0xa74
-#define DMA_CHANNEL2_ACCESS_PROTECTION_REG		   0xa78
-#define DMA_CHANNEL3_ACCESS_PROTECTION_REG		   0xa7c
-#define DMA_ARBITER_CONTROL						0x860
-#define DMA_CROSS_BAR_TIMEOUT					0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
- /*#define CPU_IDMA_HEADERS_RETARGET_CONTROL			0x3e01 */
- /*#define CPU_IDMA_HEADERS_RETARGET_BASE			 0x3e81 */
-
-#define DMA_HEADERS_RETARGET_CONTROL			0xa84
-#define DMA_HEADERS_RETARGET_BASE			0xa88
-
-/****************************************/
-/* DMA Interrupt						*/
-/****************************************/
-
-#define CHANELS0_3_INTERRUPT_CAUSE			0x8c0
-#define CHANELS0_3_INTERRUPT_MASK			0x8c4
-#define CHANELS0_3_ERROR_ADDRESS			0x8c8
-#define CHANELS0_3_ERROR_SELECT				0x8cc
- /*#define CHANELS4_7_INTERRUPT_CAUSE			0x9c01 */
- /*#define CHANELS4_7_INTERRUPT_MASK			0x9c41 */
- /*#define CHANELS4_7_ERROR_ADDRESS			0x9c81 */
- /*#define CHANELS4_7_ERROR_SELECT			0x9cc1 */
-
-#define DMA_INTERRUPT_CAUSE_REG				CHANELS0_3_INTERRUPT_CAUSE  /*0x8c01 */
-#define DMA_INTERRUPT_CAUSE_MASK			CHANELS0_3_INTERRUPT_MASK  /*0x8c41 */
-#define DMA_ERROR_ADDR						CHANELS0_3_ERROR_ADDRESS  /*0x8c81 */
-#define DMA_ERROR_SELECT					CHANELS0_3_ERROR_SELECT	 /*0x8cc1 */
-
-
-/****************************************/
-/* DMA Debug (for internal use)		*/
-/****************************************/
-
-#define DMA_X0_ADDRESS						0x8e0
-#define DMA_X0_COMMAND_AND_ID				0x8e4
- /*#define DMA_X0_WRITE_DATA_LOW				0x8e81 */
- /*#define DMA_X0_WRITE_DATA_HIGH				0x8ec1 */
- /*#define DMA_X0_WRITE_BYTE_ENABLE				0x8f81 */
- /*#define DMA_X0_READ_DATA_LOW					0x8f01 */
- /*#define DMA_X0_READ_DATA_HIGH				0x8f41 */
- /*#define DMA_X0_READ_ID					0x8fc1 */
- /*#define DMA_X1_ADDRESS					0x9e01 */
- /*#define DMA_X1_COMMAND_AND_ID			0x9e41 */
- /*#define DMA_X1_WRITE_DATA_LOW				0x9e81 */
- /*#define DMA_X1_WRITE_DATA_HIGH				0x9ec1 */
- /*#define DMA_X1_WRITE_BYTE_ENABLE				0x9f81 */
- /*#define DMA_X1_READ_DATA_LOW					0x9f01 */
- /*#define DMA_X1_READ_DATA_HIGH				0x9f41 */
- /*#define DMA_X1_READ_ID					0x9fc1 */
-
- /*  IDMA Debug Register ( for internal use )	 */
-
-#define DMA_DEBUG_LOW						DMA_X0_ADDRESS	/* 0x8e01 */
-#define DMA_DEBUG_HIGH						DMA_X0_COMMAND_AND_ID  /*0x8e41 */
-#define DMA_SPARE						0xA8C
-
-
-/****************************************/
-/* Timer_Counter						*/
-/****************************************/
-
-#define TIMER_COUNTER0					0x850
-#define TIMER_COUNTER1					0x854
-#define TIMER_COUNTER2					0x858
-#define TIMER_COUNTER3					0x85C
-#define TIMER_COUNTER_0_3_CONTROL			0x864
-#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE		0x868
-#define TIMER_COUNTER_0_3_INTERRUPT_MASK		0x86c
- /*#define TIMER_COUNTER4					0x9501 */
- /*#define TIMER_COUNTER5					0x9541 */
- /*#define TIMER_COUNTER6					0x9581 */
- /*#define TIMER_COUNTER7					0x95C1 */
- /*#define TIMER_COUNTER_4_7_CONTROL			0x9641 */
- /*#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE		0x9681 */
- /*#define TIMER_COUNTER_4_7_INTERRUPT_MASK			0x96c1 */
-
-/****************************************/
-/* PCI Slave Address Decoding		*/
-/****************************************/
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-#define PCI_0_CS_0_BANK_SIZE					PCI_0SCS_0_BANK_SIZE  /*0xc081 */
-#define PCI_1_CS_0_BANK_SIZE					PCI_1SCS_0_BANK_SIZE  /* 0xc881 */
-#define PCI_0_CS_1_BANK_SIZE					PCI_0SCS_1_BANK_SIZE  /*0xd081 */
-#define PCI_1_CS_1_BANK_SIZE					PCI_1SCS_1_BANK_SIZE  /* 0xd881 */
-#define PCI_0_CS_2_BANK_SIZE					PCI_0SCS_2_BANK_SIZE  /*0xc0c1 */
-#define PCI_1_CS_2_BANK_SIZE					PCI_1SCS_2_BANK_SIZE  /*0xc8c1 */
-#define PCI_0_CS_3_BANK_SIZE					PCI_0SCS_3_BANK_SIZE  /*0xd0c1 */
-#define PCI_1_CS_3_BANK_SIZE					PCI_1SCS_3_BANK_SIZE  /*0xd8c1 */
-#define PCI_0_DEVCS_0_BANK_SIZE					PCI_0CS_0_BANK_SIZE  /*0xc101 */
-#define PCI_1_DEVCS_0_BANK_SIZE				    PCI_1CS_0_BANK_SIZE	 /*0xc901 */
-#define PCI_0_DEVCS_1_BANK_SIZE				    PCI_0CS_1_BANK_SIZE	 /*0xd101 */
-#define PCI_1_DEVCS_1_BANK_SIZE				    PCI_1CS_1_BANK_SIZE	 /* 0xd901 */
-#define PCI_0_DEVCS_2_BANK_SIZE				    PCI_0CS_2_BANK_SIZE	 /* 0xd181 */
-#define PCI_1_DEVCS_2_BANK_SIZE				    PCI_1CS_2_BANK_SIZE	 /*0xd981 */
-#define PCI_0_DEVCS_3_BANK_SIZE				    PCI_0CS_3_BANK_SIZE	 /* 0xc141 */
-#define PCI_1_DEVCS_3_BANK_SIZE				    PCI_1CS_3_BANK_SIZE	 /*0xc941 */
-#define PCI_0_DEVCS_BOOT_BANK_SIZE			PCI_0CS_BOOT_BANK_SIZE	/*0xd141 */
-#define PCI_1_DEVCS_BOOT_BANK_SIZE			PCI_1CS_BOOT_BANK_SIZE	/* 0xd941 */
-#define PCI_0_P2P_MEM0_BAR_SIZE				    PCI_0P2P_MEM0_BAR_SIZE  /*0xd1c1 */
-#define PCI_1_P2P_MEM0_BAR_SIZE				    PCI_1P2P_MEM0_BAR_SIZE  /*0xd9c1 */
-#define PCI_0_P2P_MEM1_BAR_SIZE				    PCI_0P2P_MEM1_BAR_SIZE  /*0xd201 */
-#define PCI_1_P2P_MEM1_BAR_SIZE				    PCI_1P2P_MEM1_BAR_SIZE  /*0xda01 */
-#define PCI_0_P2P_I_O_BAR_SIZE					PCI_0P2P_I_O_BAR_SIZE  /*0xd241 */
-#define PCI_1_P2P_I_O_BAR_SIZE					PCI_1P2P_I_O_BAR_SIZE  /*0xda41 */
-#define PCI_0_CPU_BAR_SIZE					PCI_0CPU_BAR_SIZE  /*0xd281 */
-#define PCI_1_CPU_BAR_SIZE					PCI_1CPU_BAR_SIZE  /*0xda81 */
-#define PCI_0_INTERNAL_SRAM_BAR_SIZE			PCI_0DAC_SCS_0_BANK_SIZE  /*0xe001 */
-#define PCI_1_INTERNAL_SRAM_BAR_SIZE			PCI_1DAC_SCS_0_BANK_SIZE  /*0xe801 */
-#define PCI_0_EXPANSION_ROM_BAR_SIZE			PCI_0EXPANSION_ROM_BAR_SIZE  /*0xd2c1 */
-#define PCI_1_EXPANSION_ROM_BAR_SIZE		       PCI_1EXPANSION_ROM_BAR_SIZE  /*0xd9c1 */
-#define PCI_0_BASE_ADDR_REG_ENABLE			PCI_0BASE_ADDRESS_REGISTERS_ENABLE  /*0xc3c1 */
-#define PCI_1_BASE_ADDR_REG_ENABLE			PCI_1BASE_ADDRESS_REGISTERS_ENABLE  /*0xcbc1 */
-#define PCI_0_CS_0_BASE_ADDR_REMAP		PCI_0SCS_0_BASE_ADDRESS_REMAP  /*0xc481 */
-#define PCI_1_CS_0_BASE_ADDR_REMAP		PCI_1SCS_0_BASE_ADDRESS_REMAP  /*0xcc81 */
-#define PCI_0_CS_1_BASE_ADDR_REMAP		PCI_0SCS_1_BASE_ADDRESS_REMAP  /*0xd481 */
-#define PCI_1_CS_1_BASE_ADDR_REMAP		PCI_1SCS_1_BASE_ADDRESS_REMAP  /*0xdc81 */
-#define PCI_0_CS_2_BASE_ADDR_REMAP		PCI_0SCS_2_BASE_ADDRESS_REMAP  /*0xc4c1 */
-#define PCI_1_CS_2_BASE_ADDR_REMAP		PCI_1SCS_2_BASE_ADDRESS_REMAP  /*0xccc1 */
-#define PCI_0_CS_3_BASE_ADDR_REMAP		PCI_0SCS_3_BASE_ADDRESS_REMAP  /*0xd4c1 */
-#define PCI_1_CS_3_BASE_ADDR_REMAP		PCI_1SCS_3_BASE_ADDRESS_REMAP /* 0xdcc1 */
-#define PCI_0_CS_0_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP
-#define PCI_1_CS_0_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP
-#define PCI_0_CS_1_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP
-#define PCI_1_CS_1_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP
-#define PCI_0_CS_2_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP
-#define PCI_1_CS_2_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP
-#define PCI_0_CS_3_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP
-#define PCI_1_CS_3_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP
-#define PCI_0_DEVCS_0_BASE_ADDR_REMAP		PCI_0CS_0_BASE_ADDRESS_REMAP  /*0xc501 */
-#define PCI_1_DEVCS_0_BASE_ADDR_REMAP		PCI_1CS_0_BASE_ADDRESS_REMAP  /*0xcd01 */
-#define PCI_0_DEVCS_1_BASE_ADDR_REMAP		PCI_0CS_1_BASE_ADDRESS_REMAP  /*0xd501 */
-#define PCI_1_DEVCS_1_BASE_ADDR_REMAP		PCI_1CS_1_BASE_ADDRESS_REMAP  /*0xdd01 */
-#define PCI_0_DEVCS_2_BASE_ADDR_REMAP		PCI_0CS_2_BASE_ADDRESS_REMAP  /*0xd581 */
-#define PCI_1_DEVCS_2_BASE_ADDR_REMAP		PCI_1CS_2_BASE_ADDRESS_REMAP  /*0xdd81 */
-#define PCI_0_DEVCS_3_BASE_ADDR_REMAP			PCI_0CS_3_BASE_ADDRESS_REMAP  /*0xc541 */
-#define PCI_1_DEVCS_3_BASE_ADDR_REMAP			PCI_1CS_3_BASE_ADDRESS_REMAP  /*0xcd41 */
-#define PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP    PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP	 /*0xd541 */
-#define PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP    PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP	 /*0xdd41 */
-#define PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW    PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW  /*0xd5c1 */
-#define PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW    PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW  /*0xddc1 */
-#define PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH   PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH  /*0xd601 */
-#define PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH   PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH  /*0xde01 */
-#define PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW	PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW  /*0xd641 */
-#define PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW	PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW  /*0xde41 */
-#define PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH	PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH  /*0xd681 */
-#define PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH	PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH  /*0xde81 */
-#define PCI_0_P2P_I_O_BASE_ADDR_REMAP			PCI_0P2P_I_O_BASE_ADDRESS_REMAP	 /*0xd6c1 */
-#define PCI_1_P2P_I_O_BASE_ADDR_REMAP			PCI_1P2P_I_O_BASE_ADDRESS_REMAP	 /*0xdec 1 */
-#define PCI_0_CPU_BASE_ADDR_REMAP_LOW			PCI_0CPU_BASE_ADDRESS_REMAP  /*0xd701 */
-#define PCI_1_CPU_BASE_ADDR_REMAP_LOW			PCI_1CPU_BASE_ADDRESS_REMAP  /*0xdf01 */
-#define PCI_0_CPU_BASE_ADDR_REMAP_HIGH			0xd74
-#define PCI_1_CPU_BASE_ADDR_REMAP_HIGH			0xdf4
-#define PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		  PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP  /*0xf001 */
-#define PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		  0xf80
-#define PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		   PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP  /*0xf381 */
-#define PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		   PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP  /*0xfb81 */
-#define PCI_0_ADDR_DECODE_CONTROL				PCI_0ADDRESS_DECODE_CONTROL  /*0xd3c1 */
-#define PCI_1_ADDR_DECODE_CONTROL				PCI_1ADDRESS_DECODE_CONTROL  /*0xdbc1 */
-#define PCI_0_HEADERS_RETARGET_CONTROL			0xF40
-#define PCI_1_HEADERS_RETARGET_CONTROL				0xFc0
-#define PCI_0_HEADERS_RETARGET_BASE				0xF44
-#define PCI_1_HEADERS_RETARGET_BASE				0xFc4
-#define PCI_0_HEADERS_RETARGET_HIGH				0xF48
-#define PCI_1_HEADERS_RETARGET_HIGH				0xFc8
-
-#define PCI_0SCS_0_BANK_SIZE				0xc08
-#define PCI_1SCS_0_BANK_SIZE				0xc88
-#define PCI_0SCS_1_BANK_SIZE				0xd08
-#define PCI_1SCS_1_BANK_SIZE				0xd88
-#define PCI_0SCS_2_BANK_SIZE				0xc0c
-#define PCI_1SCS_2_BANK_SIZE				0xc8c
-#define PCI_0SCS_3_BANK_SIZE				0xd0c
-#define PCI_1SCS_3_BANK_SIZE				0xd8c
-#define PCI_0CS_0_BANK_SIZE				0xc10
-#define PCI_1CS_0_BANK_SIZE				0xc90
-#define PCI_0CS_1_BANK_SIZE				0xd10
-#define PCI_1CS_1_BANK_SIZE				0xd90
-#define PCI_0CS_2_BANK_SIZE				0xd18
-#define PCI_1CS_2_BANK_SIZE				0xd98
-#define PCI_0CS_3_BANK_SIZE				0xc14
-#define PCI_1CS_3_BANK_SIZE				0xc94
-#define PCI_0CS_BOOT_BANK_SIZE				0xd14
-#define PCI_1CS_BOOT_BANK_SIZE				0xd94
-#define PCI_0P2P_MEM0_BAR_SIZE						0xd1c
-#define PCI_1P2P_MEM0_BAR_SIZE						0xd9c
-#define PCI_0P2P_MEM1_BAR_SIZE						0xd20
-#define PCI_1P2P_MEM1_BAR_SIZE						0xda0
-#define PCI_0P2P_I_O_BAR_SIZE						0xd24
-#define PCI_1P2P_I_O_BAR_SIZE						0xda4
-#define PCI_0CPU_BAR_SIZE						0xd28
-#define PCI_1CPU_BAR_SIZE						0xda8
-#define PCI_0DAC_SCS_0_BANK_SIZE				0xe00
-#define PCI_1DAC_SCS_0_BANK_SIZE				0xe80
-#define PCI_0DAC_SCS_1_BANK_SIZE				0xe04
-#define PCI_1DAC_SCS_1_BANK_SIZE				0xe84
-#define PCI_0DAC_SCS_2_BANK_SIZE				0xe08
-#define PCI_1DAC_SCS_2_BANK_SIZE				0xe88
-#define PCI_0DAC_SCS_3_BANK_SIZE				0xe0c
-#define PCI_1DAC_SCS_3_BANK_SIZE				0xe8c
-#define PCI_0DAC_CS_0_BANK_SIZE					0xe10
-#define PCI_1DAC_CS_0_BANK_SIZE					0xe90
-#define PCI_0DAC_CS_1_BANK_SIZE					0xe14
-#define PCI_1DAC_CS_1_BANK_SIZE					0xe94
-#define PCI_0DAC_CS_2_BANK_SIZE					0xe18
-#define PCI_1DAC_CS_2_BANK_SIZE					0xe98
-#define PCI_0DAC_CS_3_BANK_SIZE					0xe1c
-#define PCI_1DAC_CS_3_BANK_SIZE					0xe9c
-#define PCI_0DAC_BOOTCS_BANK_SIZE				0xe20
-#define PCI_1DAC_BOOTCS_BANK_SIZE				0xea0
-
-#define PCI_0DAC_P2P_MEM0_BAR_SIZE				0xe24
-#define PCI_1DAC_P2P_MEM0_BAR_SIZE				0xea4
-#define PCI_0DAC_P2P_MEM1_BAR_SIZE				0xe28
-#define PCI_1DAC_P2P_MEM1_BAR_SIZE				0xea8
-#define PCI_0DAC_CPU_BAR_SIZE						0xe2c
-#define PCI_1DAC_CPU_BAR_SIZE						0xeac
-#define PCI_0EXPANSION_ROM_BAR_SIZE				0xd2c
-#define PCI_1EXPANSION_ROM_BAR_SIZE				0xdac
-#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE		0xc3c
-#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE		0xcbc
-#define PCI_0SCS_0_BASE_ADDRESS_REMAP			0xc48
-#define PCI_1SCS_0_BASE_ADDRESS_REMAP			0xcc8
-#define PCI_0SCS_1_BASE_ADDRESS_REMAP			0xd48
-#define PCI_1SCS_1_BASE_ADDRESS_REMAP			0xdc8
-#define PCI_0SCS_2_BASE_ADDRESS_REMAP			0xc4c
-#define PCI_1SCS_2_BASE_ADDRESS_REMAP			0xccc
-#define PCI_0SCS_3_BASE_ADDRESS_REMAP			0xd4c
-#define PCI_1SCS_3_BASE_ADDRESS_REMAP			0xdcc
-#define PCI_0CS_0_BASE_ADDRESS_REMAP			0xc50
-#define PCI_1CS_0_BASE_ADDRESS_REMAP			0xcd0
-#define PCI_0CS_1_BASE_ADDRESS_REMAP			0xd50
-#define PCI_1CS_1_BASE_ADDRESS_REMAP			0xdd0
-#define PCI_0CS_2_BASE_ADDRESS_REMAP			0xd58
-#define PCI_1CS_2_BASE_ADDRESS_REMAP			0xdd8
-#define PCI_0CS_3_BASE_ADDRESS_REMAP			0xc54
-#define PCI_1CS_3_BASE_ADDRESS_REMAP			0xcd4
-#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP	0xd54
-#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP	0xdd4
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW			0xd5c
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW		  0xddc
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		  0xd60
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		  0xde0
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW		 0xd64
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW		 0xde4
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		 0xd68
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		 0xde8
-#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP				0xd6c
-#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP				0xdec
-#define PCI_0CPU_BASE_ADDRESS_REMAP				0xd70
-#define PCI_1CPU_BASE_ADDRESS_REMAP				0xdf0
-#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP			0xf00
-#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP			0xff0
-#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP			0xf04
-#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP			0xf84
-#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP			0xf08
-#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP			0xf88
-#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP			0xf0c
-#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP			0xf8c
-#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP			0xf10
-#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP			0xf90
-#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP			0xf14
-#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP			0xf94
-#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP			0xf18
-#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP			0xf98
-#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP			0xf1c
-#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP			0xf9c
-#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP			0xf20
-#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP		    0xfa0
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW     0xf24
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW     0xfa4
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH    0xf28
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH    0xfa8
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW	0xf2c
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW     0xfac
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH    0xf30
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH    0xfb0
-#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP				0xf34
-#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP				0xfb4
-#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP			0xf38
-#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP			0xfb8
-#define PCI_0ADDRESS_DECODE_CONTROL				0xd3c
-#define PCI_1ADDRESS_DECODE_CONTROL				0xdbc
-
-/****************************************/
-/* PCI Control				*/
-/****************************************/
-
-#define PCI_0COMMAND										0xc00
-#define PCI_1COMMAND										0xc80
-#define PCI_0MODE					    0xd00
-#define PCI_1MODE					    0xd80
-#define PCI_0TIMEOUT_RETRY									0xc04
-#define PCI_1TIMEOUT_RETRY									0xc84
-#define PCI_0READ_BUFFER_DISCARD_TIMER			    0xd04
-#define PCI_1READ_BUFFER_DISCARD_TIMER			    0xd84
-#define MSI_0TRIGGER_TIMER				    0xc38
-#define MSI_1TRIGGER_TIMER				    0xcb8
-#define PCI_0ARBITER_CONTROL				    0x1d00
-#define PCI_1ARBITER_CONTROL				    0x1d80
-/* changing untill here */
-#define PCI_0CROSS_BAR_CONTROL_LOW			     0x1d08
-#define PCI_0CROSS_BAR_CONTROL_HIGH			     0x1d0c
-#define PCI_0CROSS_BAR_TIMEOUT				     0x1d04
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW	     0x1d18
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH	     0x1d1c
-#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER		     0x1d10
-#define PCI_0P2P_CONFIGURATION				     0x1d14
-#define PCI_0ACCESS_CONTROL_BASE_0_LOW			     0x1e00
-#define PCI_0ACCESS_CONTROL_BASE_0_HIGH			     0x1e04
-#define PCI_0ACCESS_CONTROL_TOP_0			     0x1e08
-#define PCI_0ACCESS_CONTROL_BASE_1_LOW			     0x1e10
-#define PCI_0ACCESS_CONTROL_BASE_1_HIGH			     0x1e14
-#define PCI_0ACCESS_CONTROL_TOP_1			     0x1e18
-#define PCI_0ACCESS_CONTROL_BASE_2_LOW			     0x1e20
-#define PCI_0ACCESS_CONTROL_BASE_2_HIGH			     0x1e24
-#define PCI_0ACCESS_CONTROL_TOP_2			     0x1e28
-#define PCI_0ACCESS_CONTROL_BASE_3_LOW			     0x1e30
-#define PCI_0ACCESS_CONTROL_BASE_3_HIGH			     0x1e34
-#define PCI_0ACCESS_CONTROL_TOP_3			     0x1e38
-#define PCI_0ACCESS_CONTROL_BASE_4_LOW			     0x1e40
-#define PCI_0ACCESS_CONTROL_BASE_4_HIGH			     0x1e44
-#define PCI_0ACCESS_CONTROL_TOP_4			     0x1e48
-#define PCI_0ACCESS_CONTROL_BASE_5_LOW			     0x1e50
-#define PCI_0ACCESS_CONTROL_BASE_5_HIGH			     0x1e54
-#define PCI_0ACCESS_CONTROL_TOP_5			     0x1e58
-#define PCI_0ACCESS_CONTROL_BASE_6_LOW			     0x1e60
-#define PCI_0ACCESS_CONTROL_BASE_6_HIGH			     0x1e64
-#define PCI_0ACCESS_CONTROL_TOP_6			     0x1e68
-#define PCI_0ACCESS_CONTROL_BASE_7_LOW			     0x1e70
-#define PCI_0ACCESS_CONTROL_BASE_7_HIGH			     0x1e74
-#define PCI_0ACCESS_CONTROL_TOP_7			     0x1e78
-#define PCI_1CROSS_BAR_CONTROL_LOW			     0x1d88
-#define PCI_1CROSS_BAR_CONTROL_HIGH			     0x1d8c
-#define PCI_1CROSS_BAR_TIMEOUT				     0x1d84
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW	     0x1d98
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH	     0x1d9c
-#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER		     0x1d90
-#define PCI_1P2P_CONFIGURATION				     0x1d94
-#define PCI_1ACCESS_CONTROL_BASE_0_LOW			     0x1e80
-#define PCI_1ACCESS_CONTROL_BASE_0_HIGH			     0x1e84
-#define PCI_1ACCESS_CONTROL_TOP_0			     0x1e88
-#define PCI_1ACCESS_CONTROL_BASE_1_LOW			     0x1e90
-#define PCI_1ACCESS_CONTROL_BASE_1_HIGH			     0x1e94
-#define PCI_1ACCESS_CONTROL_TOP_1			     0x1e98
-#define PCI_1ACCESS_CONTROL_BASE_2_LOW			     0x1ea0
-#define PCI_1ACCESS_CONTROL_BASE_2_HIGH			     0x1ea4
-#define PCI_1ACCESS_CONTROL_TOP_2			     0x1ea8
-#define PCI_1ACCESS_CONTROL_BASE_3_LOW			     0x1eb0
-#define PCI_1ACCESS_CONTROL_BASE_3_HIGH			     0x1eb4
-#define PCI_1ACCESS_CONTROL_TOP_3			     0x1eb8
-#define PCI_1ACCESS_CONTROL_BASE_4_LOW			     0x1ec0
-#define PCI_1ACCESS_CONTROL_BASE_4_HIGH			     0x1ec4
-#define PCI_1ACCESS_CONTROL_TOP_4			     0x1ec8
-#define PCI_1ACCESS_CONTROL_BASE_5_LOW			     0x1ed0
-#define PCI_1ACCESS_CONTROL_BASE_5_HIGH			     0x1ed4
-#define PCI_1ACCESS_CONTROL_TOP_5			     0x1ed8
-#define PCI_1ACCESS_CONTROL_BASE_6_LOW			     0x1ee0
-#define PCI_1ACCESS_CONTROL_BASE_6_HIGH			     0x1ee4
-#define PCI_1ACCESS_CONTROL_TOP_6			     0x1ee8
-#define PCI_1ACCESS_CONTROL_BASE_7_LOW			     0x1ef0
-#define PCI_1ACCESS_CONTROL_BASE_7_HIGH			     0x1ef4
-#define PCI_1ACCESS_CONTROL_TOP_7			     0x1ef8
-
-/****************************************/
-/* PCI Snoop Control			*/
-/****************************************/
-
-#define PCI_0SNOOP_CONTROL_BASE_0_LOW			     0x1f00
-#define PCI_0SNOOP_CONTROL_BASE_0_HIGH			     0x1f04
-#define PCI_0SNOOP_CONTROL_TOP_0			     0x1f08
-#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW			     0x1f10
-#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH		     0x1f14
-#define PCI_0SNOOP_CONTROL_TOP_1			     0x1f18
-#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW			     0x1f20
-#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH		     0x1f24
-#define PCI_0SNOOP_CONTROL_TOP_2			     0x1f28
-#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW			     0x1f30
-#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH		     0x1f34
-#define PCI_0SNOOP_CONTROL_TOP_3			     0x1f38
-#define PCI_1SNOOP_CONTROL_BASE_0_LOW			     0x1f80
-#define PCI_1SNOOP_CONTROL_BASE_0_HIGH			     0x1f84
-#define PCI_1SNOOP_CONTROL_TOP_0			     0x1f88
-#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW			     0x1f90
-#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH		     0x1f94
-#define PCI_1SNOOP_CONTROL_TOP_1			     0x1f98
-#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW			     0x1fa0
-#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH		     0x1fa4
-#define PCI_1SNOOP_CONTROL_TOP_2			     0x1fa8
-#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW			     0x1fb0
-#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH		     0x1fb4
-#define PCI_1SNOOP_CONTROL_TOP_3			     0x1fb8
-
-/****************************************/
-/* PCI Configuration Address		*/
-/****************************************/
-
-#define PCI_0CONFIGURATION_ADDRESS							0xcf8
-#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER		0xcfc
-#define PCI_1CONFIGURATION_ADDRESS							0xc78
-#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER		0xc7c
-#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER			0xc34
-#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER			0xcb4
-
-/****************************************/
-/* PCI Error Report			*/
-/****************************************/
-
-#define PCI_0SERR_MASK										 0xc28
-#define PCI_0ERROR_ADDRESS_LOW				     0x1d40
-#define PCI_0ERROR_ADDRESS_HIGH				     0x1d44
-#define PCI_0ERROR_DATA_LOW				     0x1d48
-#define PCI_0ERROR_DATA_HIGH				     0x1d4c
-#define PCI_0ERROR_COMMAND				     0x1d50
-#define PCI_0ERROR_CAUSE				     0x1d58
-#define PCI_0ERROR_MASK					     0x1d5c
-#define PCI_1SERR_MASK										 0xca8
-#define PCI_1ERROR_ADDRESS_LOW				     0x1dc0
-#define PCI_1ERROR_ADDRESS_HIGH				     0x1dc4
-#define PCI_1ERROR_DATA_LOW				     0x1dc8
-#define PCI_1ERROR_DATA_HIGH				     0x1dcc
-#define PCI_1ERROR_COMMAND				     0x1dd0
-#define PCI_1ERROR_CAUSE				     0x1dd8
-#define PCI_1ERROR_MASK					     0x1ddc
-
-
-/****************************************/
-/* Lslave Debug	 (for internal use)	*/
-/****************************************/
-
-#define L_SLAVE_X0_ADDRESS				    0x1d20
-#define L_SLAVE_X0_COMMAND_AND_ID			    0x1d24
-#define L_SLAVE_X1_ADDRESS				    0x1d28
-#define L_SLAVE_X1_COMMAND_AND_ID			    0x1d2c
-#define L_SLAVE_WRITE_DATA_LOW				    0x1d30
-#define L_SLAVE_WRITE_DATA_HIGH				    0x1d34
-#define L_SLAVE_WRITE_BYTE_ENABLE			    0x1d60
-#define L_SLAVE_READ_DATA_LOW				    0x1d38
-#define L_SLAVE_READ_DATA_HIGH				    0x1d3c
-#define L_SLAVE_READ_ID					    0x1d64
-
-/****************************************/
-/* PCI Configuration Function 0		*/
-/****************************************/
-
-#define PCI_DEVICE_AND_VENDOR_ID							0x000
-#define PCI_STATUS_AND_COMMAND								0x004
-#define PCI_CLASS_CODE_AND_REVISION_ID					0x008
-#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE		0x00C
-#define PCI_SCS_0_BASE_ADDRESS							0x010
-#define PCI_SCS_1_BASE_ADDRESS							    0x014
-#define PCI_SCS_2_BASE_ADDRESS							    0x018
-#define PCI_SCS_3_BASE_ADDRESS							0x01C
-#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS	0x020
-#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS		0x024
-#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID			0x02C
-#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER				0x030
-#define PCI_CAPABILTY_LIST_POINTER			    0x034
-#define PCI_INTERRUPT_PIN_AND_LINE						    0x03C
-#define PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
-#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
-#define PCI_VPD_ADDRESS					    0x048
-#define PCI_VPD_DATA					    0x04c
-#define PCI_MSI_MESSAGE_CONTROL				    0x050
-#define PCI_MSI_MESSAGE_ADDRESS				    0x054
-#define PCI_MSI_MESSAGE_UPPER_ADDRESS			    0x058
-#define PCI_MSI_MESSAGE_DATA				    0x05c
-#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY		    0x058
-
-/****************************************/
-/* PCI Configuration Function 1		*/
-/****************************************/
-
-#define PCI_CS_0_BASE_ADDRESS							0x110
-#define PCI_CS_1_BASE_ADDRESS							    0x114
-#define PCI_CS_2_BASE_ADDRESS							    0x118
-#define PCI_CS_3_BASE_ADDRESS							0x11c
-#define PCI_BOOTCS_BASE_ADDRESS				    0x120
-
-/****************************************/
-/* PCI Configuration Function 2		*/
-/****************************************/
-
-#define PCI_P2P_MEM0_BASE_ADDRESS						0x210
- /*#define PCI_P2P_MEM1_BASE_ADDRESS							0x2141 */
-#define PCI_P2P_I_O_BASE_ADDRESS							0x218
- /*#define PCI_CPU_BASE_ADDRESS							    0x21c1 */
-
-/****************************************/
-/* PCI Configuration Function 4		*/
-/****************************************/
-
-#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW						0x410
-#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH					    0x414
-#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW					    0x418
-#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH					    0x41c
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW		    0x420
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH		    0x424
-
-
-/****************************************/
-/* PCI Configuration Function 5		*/
-/****************************************/
-
-#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW						0x510
-#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH					    0x514
-#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW					    0x518
-#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH					    0x51c
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW		    0x520
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH		    0x524
-
-
-/****************************************/
-/* PCI Configuration Function 6		*/
-/****************************************/
-
-#define PCI_DAC_CS_0_BASE_ADDRESS_LOW						0x610
-#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH					    0x614
-#define PCI_DAC_CS_1_BASE_ADDRESS_LOW					    0x618
-#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH					    0x61c
-#define PCI_DAC_CS_2_BASE_ADDRESS_LOW				0x620
-#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH				0x624
-
-/****************************************/
-/* PCI Configuration Function 7		*/
-/****************************************/
-
-#define PCI_DAC_CS_3_BASE_ADDRESS_LOW						0x710
-#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH					    0x714
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW					    0x718
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH				    0x71c
-#define PCI_DAC_CPU_BASE_ADDRESS_LOW				0x720
-#define PCI_DAC_CPU_BASE_ADDRESS_HIGH				0x724
-
-/****************************** MV64360 and MV64460 PCI ***************************/
-/***********************************/
-/*   PCI Control Register Map	   */
-/***********************************/
-
-#define PCI_0_DLL_STATUS_AND_COMMAND				0x1d20
-#define PCI_1_DLL_STATUS_AND_COMMAND				0x1da0
-#define PCI_0_MPP_PADS_DRIVE_CONTROL				0x1d1C
-#define PCI_1_MPP_PADS_DRIVE_CONTROL				0x1d9C
-#define PCI_0_COMMAND					0xc00
-#define PCI_1_COMMAND					0xc80
-#define PCI_0_MODE							0xd00
-#define PCI_1_MODE							0xd80
-#define PCI_0_RETRY						0xc04
-#define PCI_1_RETRY						0xc84
-#define PCI_0_READ_BUFFER_DISCARD_TIMER				0xd04
-#define PCI_1_READ_BUFFER_DISCARD_TIMER				0xd84
-#define PCI_0_MSI_TRIGGER_TIMER						0xc38
-#define PCI_1_MSI_TRIGGER_TIMER						0xcb8
-#define PCI_0_ARBITER_CONTROL						0x1d00
-#define PCI_1_ARBITER_CONTROL						0x1d80
-#define PCI_0_CROSS_BAR_CONTROL_LOW				0x1d08
-#define PCI_1_CROSS_BAR_CONTROL_LOW				0x1d88
-#define PCI_0_CROSS_BAR_CONTROL_HIGH				0x1d0c
-#define PCI_1_CROSS_BAR_CONTROL_HIGH				0x1d8c
-#define PCI_0_CROSS_BAR_TIMEOUT					0x1d04
-#define PCI_1_CROSS_BAR_TIMEOUT					0x1d84
-#define PCI_0_SYNC_BARRIER_TRIGGER_REG				0x1D18
-#define PCI_1_SYNC_BARRIER_TRIGGER_REG				0x1D98
-#define PCI_0_SYNC_BARRIER_VIRTUAL_REG				0x1d10
-#define PCI_1_SYNC_BARRIER_VIRTUAL_REG				0x1d90
-#define PCI_0_P2P_CONFIG						0x1d14
-#define PCI_1_P2P_CONFIG						0x1d94
-
-#define PCI_0_ACCESS_CONTROL_BASE_0_LOW				0x1e00
-#define PCI_0_ACCESS_CONTROL_BASE_0_HIGH			0x1e04
-#define PCI_0_ACCESS_CONTROL_SIZE_0				0x1e08
-#define PCI_0_ACCESS_CONTROL_BASE_1_LOW				0x1e10
-#define PCI_0_ACCESS_CONTROL_BASE_1_HIGH			0x1e14
-#define PCI_0_ACCESS_CONTROL_SIZE_1				0x1e18
-#define PCI_0_ACCESS_CONTROL_BASE_2_LOW				0x1e20
-#define PCI_0_ACCESS_CONTROL_BASE_2_HIGH			0x1e24
-#define PCI_0_ACCESS_CONTROL_SIZE_2				0x1e28
-#define PCI_0_ACCESS_CONTROL_BASE_3_LOW				0x1e30
-#define PCI_0_ACCESS_CONTROL_BASE_3_HIGH			0x1e34
-#define PCI_0_ACCESS_CONTROL_SIZE_3				0x1e38
-#define PCI_0_ACCESS_CONTROL_BASE_4_LOW				0x1e40
-#define PCI_0_ACCESS_CONTROL_BASE_4_HIGH			0x1e44
-#define PCI_0_ACCESS_CONTROL_SIZE_4				0x1e48
-#define PCI_0_ACCESS_CONTROL_BASE_5_LOW				0x1e50
-#define PCI_0_ACCESS_CONTROL_BASE_5_HIGH			0x1e54
-#define PCI_0_ACCESS_CONTROL_SIZE_5				0x1e58
-
-#define PCI_1_ACCESS_CONTROL_BASE_0_LOW				0x1e80
-#define PCI_1_ACCESS_CONTROL_BASE_0_HIGH			0x1e84
-#define PCI_1_ACCESS_CONTROL_SIZE_0				0x1e88
-#define PCI_1_ACCESS_CONTROL_BASE_1_LOW				0x1e90
-#define PCI_1_ACCESS_CONTROL_BASE_1_HIGH			0x1e94
-#define PCI_1_ACCESS_CONTROL_SIZE_1				0x1e98
-#define PCI_1_ACCESS_CONTROL_BASE_2_LOW				0x1ea0
-#define PCI_1_ACCESS_CONTROL_BASE_2_HIGH			0x1ea4
-#define PCI_1_ACCESS_CONTROL_SIZE_2				0x1ea8
-#define PCI_1_ACCESS_CONTROL_BASE_3_LOW				0x1eb0
-#define PCI_1_ACCESS_CONTROL_BASE_3_HIGH			0x1eb4
-#define PCI_1_ACCESS_CONTROL_SIZE_3				0x1eb8
-#define PCI_1_ACCESS_CONTROL_BASE_4_LOW				0x1ec0
-#define PCI_1_ACCESS_CONTROL_BASE_4_HIGH			0x1ec4
-#define PCI_1_ACCESS_CONTROL_SIZE_4				0x1ec8
-#define PCI_1_ACCESS_CONTROL_BASE_5_LOW				0x1ed0
-#define PCI_1_ACCESS_CONTROL_BASE_5_HIGH			0x1ed4
-#define PCI_1_ACCESS_CONTROL_SIZE_5				0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define PCI_0_CONFIG_ADDR				0xcf8
-#define PCI_0_CONFIG_DATA_VIRTUAL_REG				0xcfc
-#define PCI_1_CONFIG_ADDR				0xc78
-#define PCI_1_CONFIG_DATA_VIRTUAL_REG				0xc7c
-#define PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
-#define PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers		*/
-/****************************************/
-
-#define PCI_0_SERR_MASK					0xc28
-#define PCI_1_SERR_MASK					0xca8
-#define PCI_0_ERROR_ADDR_LOW						0x1d40
-#define PCI_1_ERROR_ADDR_LOW						0x1dc0
-#define PCI_0_ERROR_ADDR_HIGH						0x1d44
-#define PCI_1_ERROR_ADDR_HIGH						0x1dc4
-#define PCI_0_ERROR_ATTRIBUTE						0x1d48
-#define PCI_1_ERROR_ATTRIBUTE						0x1dc8
-#define PCI_0_ERROR_COMMAND						0x1d50
-#define PCI_1_ERROR_COMMAND						0x1dd0
-#define PCI_0_ERROR_CAUSE						0x1d58
-#define PCI_1_ERROR_CAUSE						0x1dd8
-#define PCI_0_ERROR_MASK						0x1d5c
-#define PCI_1_ERROR_MASK						0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers		*/
-/****************************************/
-
-#define PCI_0_MMASK							0X1D24
-#define PCI_1_MMASK							0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define PCI_DEVICE_AND_VENDOR_ID			0x000
-#define PCI_STATUS_AND_COMMAND			0x004
-#define PCI_CLASS_CODE_AND_REVISION_ID			0x008
-#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE		0x00C
-
-#define PCI_SCS_0_BASE_ADDR_LOW				0x010
-#define PCI_SCS_0_BASE_ADDR_HIGH			0x014
-#define PCI_SCS_1_BASE_ADDR_LOW				0x018
-#define PCI_SCS_1_BASE_ADDR_HIGH			0x01C
-#define PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW    0x020
-#define PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH   0x024
- /*#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	0x02c1 */
-#define PCI_EXPANSION_ROM_BASE_ADDR_REG		0x030
-#define PCI_CAPABILTY_LIST_POINTER				0x034
-#define PCI_INTERRUPT_PIN_AND_LINE			0x03C
-       /* capability list */
-#define PCI_POWER_MANAGEMENT_CAPABILITY				0x040
-#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL	     0x044
-#define PCI_VPD_ADDR							0x048
-#define PCI_VPD_DATA							0x04c
-#define PCI_MSI_MESSAGE_CONTROL					0x050
-#define PCI_MSI_MESSAGE_ADDR						0x054
-#define PCI_MSI_MESSAGE_UPPER_ADDR				0x058
-#define PCI_MSI_MESSAGE_DATA						0x05c
-#define PCI_X_COMMAND							0x060
-#define PCI_X_STATUS							0x064
-#define PCI_COMPACT_PCI_HOT_SWAP				0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define PCI_SCS_2_BASE_ADDR_LOW				0x110
-#define PCI_SCS_2_BASE_ADDR_HIGH			0x114
-#define PCI_SCS_3_BASE_ADDR_LOW				0x118
-#define PCI_SCS_3_BASE_ADDR_HIGH			0x11c
-#define PCI_INTERNAL_SRAM_BASE_ADDR_LOW					0x120
-#define PCI_INTERNAL_SRAM_BASE_ADDR_HIGH				0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define PCI_DEVCS_0_BASE_ADDR_LOW			0x210
-#define PCI_DEVCS_0_BASE_ADDR_HIGH			0x214
-#define PCI_DEVCS_1_BASE_ADDR_LOW			0x218
-#define PCI_DEVCS_1_BASE_ADDR_HIGH				0x21c
-#define PCI_DEVCS_2_BASE_ADDR_LOW			0x220
-#define PCI_DEVCS_2_BASE_ADDR_HIGH				0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define PCI_DEVCS_3_BASE_ADDR_LOW			0x310
-#define PCI_DEVCS_3_BASE_ADDR_HIGH			0x314
-#define PCI_BOOT_CS_BASE_ADDR_LOW			0x318
-#define PCI_BOOT_CS_BASE_ADDR_HIGH				0x31c
-#define PCI_CPU_BASE_ADDR_LOW				0x220
-#define PCI_CPU_BASE_ADDR_HIGH				0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define PCI_P2P_MEM0_BASE_ADDR_LOW			0x410
-#define PCI_P2P_MEM0_BASE_ADDR_HIGH			0x414
-#define PCI_P2P_MEM1_BASE_ADDR_LOW			0x418
-#define PCI_P2P_MEM1_BASE_ADDR_HIGH			0x41c
-#define PCI_P2P_I_O_BASE_ADDR						0x420
-#define PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		  0x424
-
-/****************************** MV64360 and MV64460 PCI End ***************************/
-/****************************************/
-/* I20 Support registers				*/
-/****************************************/
-
-#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x010
-#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x014
-#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x018
-#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x01C
-#define INBOUND_DOORBELL_REGISTER_PCI_SIDE		0x020
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x024
-#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x028
-#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE		0x02C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x030
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x034
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x040
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x044
-#define QUEUE_CONTROL_REGISTER_PCI_SIDE			0x050
-#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE		0x054
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x060
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x064
-#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x068
-#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x06C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x070
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x074
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x078
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x07C
-
-#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1C10
-#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1C14
-#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1C18
-#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1C1C
-#define INBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1C20
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1C24
-#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1C28
-#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1C2C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1C30
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1C34
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE		0x1C40
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE		0x1C44
-#define QUEUE_CONTROL_REGISTER_CPU_SIDE				0x1C50
-#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE			0x1C54
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C60
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C64
-#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C68
-#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C6C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C70
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C74
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C78
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C7C
-
-
-/****************************************/
-/* Messaging Unit Registers (I20)	*/
-/****************************************/
-
-#define I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE			0x010
-#define I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE				0x014
-#define I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE				0x018
-#define I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE				0x01C
-#define I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE				0x020
-#define I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE		0x024
-#define I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE			0x028
-#define I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE				0x02C
-#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE		0x030
-#define I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE		0x034
-#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE		0x040
-#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE		0x044
-#define I2O_QUEUE_CONTROL_REG_PCI_0_SIDE			0x050
-#define I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE			0x054
-#define I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE		0x060
-#define I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE		0x064
-#define I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE		0x068
-#define I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE		0x06C
-#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE		0x070
-#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE		0x074
-#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE		0x0F8
-#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE		0x0FC
-
-#define I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE			0x090
-#define I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE				0x094
-#define I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE				0x098
-#define I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE				0x09C
-#define I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE				0x0A0
-#define I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE		0x0A4
-#define I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE			0x0A8
-#define I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE				0x0AC
-#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE		0x0B0
-#define I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE		0x0B4
-#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE		0x0C0
-#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE		0x0C4
-#define I2O_QUEUE_CONTROL_REG_PCI_1_SIDE			0x0D0
-#define I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE			0x0D4
-#define I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE		0x0E0
-#define I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE		0x0E4
-#define I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE		0x0E8
-#define I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE		0x0EC
-#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE		0x0F0
-#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE		0x0F4
-#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE		0x078
-#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE		0x07C
-
-#define I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE			0x1C10
-#define I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE				0x1C14
-#define I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE				0x1C18
-#define I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE				0x1C1C
-#define I2O_INBOUND_DOORBELL_REG_CPU0_SIDE				0x1C20
-#define I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE			0x1C24
-#define I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE			0x1C28
-#define I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE				0x1C2C
-#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE		0x1C30
-#define I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE		0x1C34
-#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE		0x1C40
-#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE		0x1C44
-#define I2O_QUEUE_CONTROL_REG_CPU0_SIDE				0x1C50
-#define I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE				0x1C54
-#define I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE		0x1C60
-#define I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE		0x1C64
-#define I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE		0x1C68
-#define I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE		0x1C6C
-#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE		0x1C70
-#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE		0x1C74
-#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE		0x1CF8
-#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE		0x1CFC
-#define I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE			0x1C90
-#define I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE				0x1C94
-#define I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE				0x1C98
-#define I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE				0x1C9C
-#define I2O_INBOUND_DOORBELL_REG_CPU1_SIDE				0x1CA0
-#define I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE			0x1CA4
-#define I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE			0x1CA8
-#define I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE				0x1CAC
-#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE		0x1CB0
-#define I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE		0x1CB4
-#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE		0x1CC0
-#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE		0x1CC4
-#define I2O_QUEUE_CONTROL_REG_CPU1_SIDE				0x1CD0
-#define I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE				0x1CD4
-#define I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE		0x1CE0
-#define I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE		0x1CE4
-#define I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE		0x1CE8
-#define I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE		0x1CEC
-#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE		0x1CF0
-#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE		0x1CF4
-#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE		0x1C78
-#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE		0x1C7C
-
-
-/****************************************/
-/* Communication Unit Registers		*/
-/****************************************/
-/*
-#define ETHERNET_0_ADDRESS_CONTROL_LOW						0xf200
-#define ETHERNET_0_ADDRESS_CONTROL_HIGH			    0xf204
-#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf208
-#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf20c
-#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf210
-#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf214
-#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf218
-#define ETHERNET_1_ADDRESS_CONTROL_LOW			    0xf220
-#define ETHERNET_1_ADDRESS_CONTROL_HIGH			    0xf224
-#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf228
-#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf22c
-#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf230
-#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf234
-#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf238
-#define ETHERNET_2_ADDRESS_CONTROL_LOW			    0xf240
-#define ETHERNET_2_ADDRESS_CONTROL_HIGH			    0xf244
-#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf248
-#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf24c
-#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf250
-#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf254
-#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf258
- */
-#define MPSC_0_ADDRESS_CONTROL_LOW			    0xf280
-#define MPSC_0_ADDRESS_CONTROL_HIGH			    0xf284
-#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		    0xf288
-#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		    0xf28c
-#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf290
-#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf294
-#define MPSC_1_ADDRESS_CONTROL_LOW			    0xf2c0
-#define MPSC_1_ADDRESS_CONTROL_HIGH			    0xf2c4
-#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		    0xf2c8
-#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		    0xf2cc
-#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf2d0
-#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf2d4
- /*#define SERIAL_INIT_PCI_HIGH_ADDRESS			       0xf3201 */
-#define COMM_UNIT_ARBITER_CONTROL			    0xf300
-#define COMM_UNIT_CROSS_BAR_TIMEOUT			    0xf304
-#define COMM_UNIT_INTERRUPT_CAUSE			    0xf310
-#define COMM_UNIT_INTERRUPT_MASK			    0xf314
-#define COMM_UNIT_ERROR_ADDRESS				    0xf314
-/****************************************/
-/*    Serial Initialization registers	*/
-/****************************************/
-
- /*#define SERIAL_INIT_LAST_DATA					0xf3241 */
- /*#define SERIAL_INIT_STATUS_AND_CONTROL			0xf3281 */
-#define SERIAL_INIT_LAST_DATA						0xf324
-#define SERIAL_INIT_CONTROL						0xf328
-#define SERIAL_INIT_STATUS						0xf32c
-
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define ETH_PHY_ADDR_REG			0x2000
-#define ETH_SMI_REG					0x2004
-#define ETH_UNIT_DEFAULT_ADDR_REG		0x2008
-#define ETH_UNIT_DEFAULTID_REG			0x200c
-#define ETH_UNIT_INTERRUPT_CAUSE_REG	0x2080
-#define ETH_UNIT_INTERRUPT_MASK_REG	0x2084
-#define ETH_UNIT_INTERNAL_USE_REG		0x24fc
-#define ETH_UNIT_ERROR_ADDR_REG			0x2094
-#define ETH_BAR_0					0x2200
-#define ETH_BAR_1					0x2208
-#define ETH_BAR_2					0x2210
-#define ETH_BAR_3					0x2218
-#define ETH_BAR_4					0x2220
-#define ETH_BAR_5					0x2228
-#define ETH_SIZE_REG_0				0x2204
-#define ETH_SIZE_REG_1				0x220c
-#define ETH_SIZE_REG_2				0x2214
-#define ETH_SIZE_REG_3				0x221c
-#define ETH_SIZE_REG_4				0x2224
-#define ETH_SIZE_REG_5					0x222c
-#define ETH_HEADERS_RETARGET_BASE_REG			0x2230
-#define ETH_HEADERS_RETARGET_CONTROL_REG	0x2234
-#define ETH_HIGH_ADDR_REMAP_REG_0		0x2280
-#define ETH_HIGH_ADDR_REMAP_REG_1		0x2284
-#define ETH_HIGH_ADDR_REMAP_REG_2		0x2288
-#define ETH_HIGH_ADDR_REMAP_REG_3			0x228c
-#define ETH_BASE_ADDR_ENABLE_REG			0x2290
-#define ETH_ACCESS_PROTECTION_REG(port)			(0x2294 + (port<<2))
-#define ETH_MIB_COUNTERS_BASE(port)			(0x3000 + (port<<7))
-#define ETH_PORT_CONFIG_REG(port)				(0x2400 + (port<<10))
-#define ETH_PORT_CONFIG_EXTEND_REG(port)		(0x2404 + (port<<10))
-#define ETH_MII_SERIAL_PARAMETRS_REG(port)		(0x2408 + (port<<10))
-#define ETH_GMII_SERIAL_PARAMETRS_REG(port)		(0x240c + (port<<10))
-#define ETH_VLAN_ETHERTYPE_REG(port)			(0x2410 + (port<<10))
-#define ETH_MAC_ADDR_LOW(port)					(0x2414 + (port<<10))
-#define ETH_MAC_ADDR_HIGH(port)					(0x2418 + (port<<10))
-#define ETH_SDMA_CONFIG_REG(port)				(0x241c + (port<<10))
-#define ETH_DSCP_0(port)					(0x2420 + (port<<10))
-#define ETH_DSCP_1(port)					(0x2424 + (port<<10))
-#define ETH_DSCP_2(port)					(0x2428 + (port<<10))
-#define ETH_DSCP_3(port)					(0x242c + (port<<10))
-#define ETH_DSCP_4(port)					(0x2430 + (port<<10))
-#define ETH_DSCP_5(port)					(0x2434 + (port<<10))
-#define ETH_DSCP_6(port)					(0x2438 + (port<<10))
-#define ETH_PORT_SERIAL_CONTROL_REG(port)		(0x243c + (port<<10))
-#define ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		(0x2440 + (port<<10))
-#define ETH_PORT_STATUS_REG(port)				(0x2444 + (port<<10))
-#define ETH_TRANSMIT_QUEUE_COMMAND_REG(port)	(0x2448 + (port<<10))
-#define ETH_TX_QUEUE_FIXED_PRIORITY(port)		(0x244c + (port<<10))
-#define ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)		(0x2450 + (port<<10))
-#define ETH_MAXIMUM_TRANSMIT_UNIT(port)				(0x2458 + (port<<10))
-#define ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)		(0x245c + (port<<10))
-#define ETH_INTERRUPT_CAUSE_REG(port)				(0x2460 + (port<<10))
-#define ETH_INTERRUPT_CAUSE_EXTEND_REG(port)			(0x2464 + (port<<10))
-#define ETH_INTERRUPT_MASK_REG(port)				(0x2468 + (port<<10))
-#define ETH_INTERRUPT_EXTEND_MASK_REG(port)			(0x246c + (port<<10))
-#define ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)			(0x2470 + (port<<10))
-#define ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)			(0x2474 + (port<<10))
-#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port)			(0x247c + (port<<10))
-#define ETH_RX_DISCARDED_FRAMES_COUNTER(port)			(0x2484 + (port<<10)
-#define ETH_PORT_DEBUG_0_REG(port)					(0x248c + (port<<10))
-#define ETH_PORT_DEBUG_1_REG(port)					(0x2490 + (port<<10))
-#define ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)			(0x2494 + (port<<10))
-#define ETH_INTERNAL_USE_REG(port)					(0x24fc + (port<<10))
-#define ETH_RECEIVE_QUEUE_COMMAND_REG(port)			(0x2680 + (port<<10))
-#define ETH_CURRENT_SERVED_TX_DESC_PTR(port)			(0x2684 + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)			(0x260c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)			(0x261c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)			(0x262c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)			(0x263c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)			(0x264c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)			(0x265c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)			(0x266c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)			(0x267c + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)			(0x26c0 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)			(0x26c4 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)			(0x26c8 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)			(0x26cc + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)			(0x26d0 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)			(0x26d4 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)			(0x26d8 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)			(0x26dc + (port<<10))
-#define ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)			(0x2700 + (port<<10))
-#define ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)			(0x2710 + (port<<10))
-#define ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)			(0x2720 + (port<<10))
-#define ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)			(0x2730 + (port<<10))
-#define ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)			(0x2740 + (port<<10))
-#define ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)			(0x2750 + (port<<10))
-#define ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)			(0x2760 + (port<<10))
-#define ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)			(0x2770 + (port<<10))
-#define ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)		(0x2704 + (port<<10))
-#define ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)		(0x2714 + (port<<10))
-#define ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)		(0x2724 + (port<<10))
-#define ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)		(0x2734 + (port<<10))
-#define ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)		(0x2744 + (port<<10))
-#define ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)		(0x2754 + (port<<10))
-#define ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)		(0x2764 + (port<<10))
-#define ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)		(0x2774 + (port<<10))
-#define ETH_TX_QUEUE_0_ARBITER_CONFIG(port)			(0x2708 + (port<<10))
-#define ETH_TX_QUEUE_1_ARBITER_CONFIG(port)			(0x2718 + (port<<10))
-#define ETH_TX_QUEUE_2_ARBITER_CONFIG(port)			(0x2728 + (port<<10))
-#define ETH_TX_QUEUE_3_ARBITER_CONFIG(port)			(0x2738 + (port<<10))
-#define ETH_TX_QUEUE_4_ARBITER_CONFIG(port)			(0x2748 + (port<<10))
-#define ETH_TX_QUEUE_5_ARBITER_CONFIG(port)			(0x2758 + (port<<10))
-#define ETH_TX_QUEUE_6_ARBITER_CONFIG(port)			(0x2768 + (port<<10))
-#define ETH_TX_QUEUE_7_ARBITER_CONFIG(port)			(0x2778 + (port<<10))
-#define ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)			(0x2780 + (port<<10))
-#define ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)	(0x3400 + (port<<10))
-#define ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)		(0x3500 + (port<<10))
-#define ETH_DA_FILTER_UNICAST_TABLE_BASE(port)			(0x3600 + (port<<10))
-
-/****************************************/
-/* Cunit Debug	(for internal use)     */
-/****************************************/
-
-#define CUNIT_ADDRESS					    0xf340
-#define CUNIT_COMMAND_AND_ID				    0xf344
-#define CUNIT_WRITE_DATA_LOW				    0xf348
-#define CUNIT_WRITE_DATA_HIGH				    0xf34c
-#define CUNIT_WRITE_BYTE_ENABLE				    0xf358
-#define CUNIT_READ_DATA_LOW				    0xf350
-#define CUNIT_READ_DATA_HIGH				    0xf354
-#define CUNIT_READ_ID					    0xf35c
-
-/****************************************/
-/* Fast Ethernet Unit Registers		*/
-/****************************************/
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define ETH_PHY_ADDR_REG				0x2000
-#define ETH_SMI_REG						0x2004
-#define ETH_UNIT_DEFAULT_ADDR_REG			0x2008
-#define ETH_UNIT_DEFAULTID_REG				0x200c
-#define ETH_UNIT_INTERRUPT_CAUSE_REG			0x2080
-#define ETH_UNIT_INTERRUPT_MASK_REG		0x2084
-#define ETH_UNIT_INTERNAL_USE_REG			0x24fc
-#define ETH_UNIT_ERROR_ADDR_REG				0x2094
-#define ETH_BAR_0						0x2200
-#define ETH_BAR_1						0x2208
-#define ETH_BAR_2						0x2210
-#define ETH_BAR_3						0x2218
-#define ETH_BAR_4						0x2220
-#define ETH_BAR_5						0x2228
-#define ETH_SIZE_REG_0						0x2204
-#define ETH_SIZE_REG_1						0x220c
-#define ETH_SIZE_REG_2						0x2214
-#define ETH_SIZE_REG_3						0x221c
-#define ETH_SIZE_REG_4						0x2224
-#define ETH_SIZE_REG_5						0x222c
-#define ETH_HEADERS_RETARGET_BASE_REG			0x2230
-#define ETH_HEADERS_RETARGET_CONTROL_REG	0x2234
-#define ETH_HIGH_ADDR_REMAP_REG_0			0x2280
-#define ETH_HIGH_ADDR_REMAP_REG_1		0x2284
-#define ETH_HIGH_ADDR_REMAP_REG_2		0x2288
-#define ETH_HIGH_ADDR_REMAP_REG_3			0x228c
-#define ETH_BASE_ADDR_ENABLE_REG			0x2290
-#define ETH_ACCESS_PROTECTION_REG(port)			(0x2294 + (port<<2))
-#define ETH_MIB_COUNTERS_BASE(port)			(0x3000 + (port<<7))
-#define ETH_PORT_CONFIG_REG(port)			(0x2400 + (port<<10))
-#define ETH_PORT_CONFIG_EXTEND_REG(port)		(0x2404 + (port<<10))
-#define ETH_MII_SERIAL_PARAMETRS_REG(port)		(0x2408 + (port<<10))
-#define ETH_GMII_SERIAL_PARAMETRS_REG(port)		(0x240c + (port<<10))
-#define ETH_VLAN_ETHERTYPE_REG(port)			(0x2410 + (port<<10))
-#define ETH_MAC_ADDR_LOW(port)					(0x2414 + (port<<10))
-#define ETH_MAC_ADDR_HIGH(port)					(0x2418 + (port<<10))
-#define ETH_SDMA_CONFIG_REG(port)			(0x241c + (port<<10))
-#define ETH_DSCP_0(port)					(0x2420 + (port<<10))
-#define ETH_DSCP_1(port)					(0x2424 + (port<<10))
-#define ETH_DSCP_2(port)					(0x2428 + (port<<10))
-#define ETH_DSCP_3(port)					(0x242c + (port<<10))
-#define ETH_DSCP_4(port)					(0x2430 + (port<<10))
-#define ETH_DSCP_5(port)					(0x2434 + (port<<10))
-#define ETH_DSCP_6(port)					(0x2438 + (port<<10))
-#define ETH_PORT_SERIAL_CONTROL_REG(port)	(0x243c + (port<<10))
-#define ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		(0x2440 + (port<<10))
-#define ETH_PORT_STATUS_REG(port)				(0x2444 + (port<<10))
-#define ETH_TRANSMIT_QUEUE_COMMAND_REG(port)	(0x2448 + (port<<10))
-#define ETH_TX_QUEUE_FIXED_PRIORITY(port)		(0x244c + (port<<10))
-#define ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
-#define ETH_MAXIMUM_TRANSMIT_UNIT(port)			(0x2458 + (port<<10))
-#define ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
-#define ETH_INTERRUPT_CAUSE_REG(port)			(0x2460 + (port<<10))
-#define ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		(0x2464 + (port<<10))
-#define ETH_INTERRUPT_MASK_REG(port)			(0x2468 + (port<<10))
-#define ETH_INTERRUPT_EXTEND_MASK_REG(port)		(0x246c + (port<<10))
-#define ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)	(0x2470 + (port<<10))
-#define ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)	(0x2474 + (port<<10))
-#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		(0x247c + (port<<10))
-#define ETH_RX_DISCARDED_FRAMES_COUNTER(port)	(0x2484 + (port<<10)
-#define ETH_PORT_DEBUG_0_REG(port)				(0x248c + (port<<10))
-#define ETH_PORT_DEBUG_1_REG(port)				(0x2490 + (port<<10))
-#define ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)	(0x2494 + (port<<10))
-#define ETH_INTERNAL_USE_REG(port)				(0x24fc + (port<<10))
-#define ETH_RECEIVE_QUEUE_COMMAND_REG(port)	(0x2680 + (port<<10))
-#define ETH_CURRENT_SERVED_TX_DESC_PTR(port)		(0x2684 + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		(0x260c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)	(0x261c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		(0x262c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		(0x263c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		(0x264c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		(0x265c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		(0x266c + (port<<10))
-#define ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		(0x267c + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)	(0x26c0 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)	(0x26c4 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)	(0x26c8 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		(0x26cc + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		(0x26d0 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		(0x26d4 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		(0x26d8 + (port<<10))
-#define ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		(0x26dc + (port<<10))
-#define ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
-#define ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
-#define ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
-#define ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
-#define ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
-#define ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
-#define ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
-#define ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
-#define ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
-#define ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
-#define ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
-#define ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
-#define ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
-#define ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
-#define ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
-#define ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
-#define ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		(0x2708 + (port<<10))
-#define ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		(0x2718 + (port<<10))
-#define ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		(0x2728 + (port<<10))
-#define ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		(0x2738 + (port<<10))
-#define ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		(0x2748 + (port<<10))
-#define ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		(0x2758 + (port<<10))
-#define ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		(0x2768 + (port<<10))
-#define ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		(0x2778 + (port<<10))
-#define ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		(0x2780 + (port<<10))
-#define ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
-#define ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
-#define ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		(0x3600 + (port<<10))
-
-
-/* Ethernet GT64260 */
-/*
-#define ETHERNET_PHY_ADDRESS_REGISTER					0x2000
-#define ETHERNET_SMI_REGISTER							0x2010
-*/
-/* Ethernet 0 */
-/*
-#define ETHERNET0_PORT_CONFIGURATION_REGISTER				0x2400
-#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER		0x2408
-#define ETHERNET0_PORT_COMMAND_REGISTER					0x2410
-#define ETHERNET0_PORT_STATUS_REGISTER					0x2418
-#define ETHERNET0_SERIAL_PARAMETRS_REGISTER				0x2420
-#define ETHERNET0_HASH_TABLE_POINTER_REGISTER				0x2428
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2430
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2438
-#define ETHERNET0_SDMA_CONFIGURATION_REGISTER			0x2440
-#define ETHERNET0_SDMA_COMMAND_REGISTER					0x2448
-#define ETHERNET0_INTERRUPT_CAUSE_REGISTER				0x2450
-#define ETHERNET0_INTERRUPT_MASK_REGISTER				0x2458
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0				0x2480
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1				0x2484
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2				0x2488
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3				0x248c
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0		0x24a0
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1		0x24a4
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2		0x24a8
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3		0x24ac
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0		0x24e0
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1		0x24e4
-#define ETHERNET0_MIB_COUNTER_BASE					0x2500
-*/
-/* Ethernet 1 */
-/*
-#define ETHERNET1_PORT_CONFIGURATION_REGISTER				0x2800
-#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER		0x2808
-#define ETHERNET1_PORT_COMMAND_REGISTER					0x2810
-#define ETHERNET1_PORT_STATUS_REGISTER					0x2818
-#define ETHERNET1_SERIAL_PARAMETRS_REGISTER				0x2820
-#define ETHERNET1_HASH_TABLE_POINTER_REGISTER				0x2828
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2830
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2838
-#define ETHERNET1_SDMA_CONFIGURATION_REGISTER			0x2840
-#define ETHERNET1_SDMA_COMMAND_REGISTER					0x2848
-#define ETHERNET1_INTERRUPT_CAUSE_REGISTER				0x2850
-#define ETHERNET1_INTERRUPT_MASK_REGISTER				0x2858
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0				0x2880
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1				0x2884
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2				0x2888
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3				0x288c
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0		0x28a0
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1		0x28a4
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2		0x28a8
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3		0x28ac
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0		0x28e0
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1		0x28e4
-#define ETHERNET1_MIB_COUNTER_BASE					0x2900
-*/
-/* Ethernet 2 */
-/*
-#define ETHERNET2_PORT_CONFIGURATION_REGISTER				0x2c00
-#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER		0x2c08
-#define ETHERNET2_PORT_COMMAND_REGISTER					0x2c10
-#define ETHERNET2_PORT_STATUS_REGISTER					0x2c18
-#define ETHERNET2_SERIAL_PARAMETRS_REGISTER				0x2c20
-#define ETHERNET2_HASH_TABLE_POINTER_REGISTER				0x2c28
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2c30
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2c38
-#define ETHERNET2_SDMA_CONFIGURATION_REGISTER			0x2c40
-#define ETHERNET2_SDMA_COMMAND_REGISTER					0x2c48
-#define ETHERNET2_INTERRUPT_CAUSE_REGISTER				0x2c50
-#define ETHERNET2_INTERRUPT_MASK_REGISTER				0x2c58
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0				0x2c80
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1				0x2c84
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2				0x2c88
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3				0x2c8c
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0		0x2ca0
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1		0x2ca4
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2		0x2ca8
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3		0x2cac
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0		0x2ce0
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1		0x2ce4
-#define ETHERNET2_MIB_COUNTER_BASE					0x2d00
-*/
-
-/****************************************/
-/* SDMA Registers			*/
-/****************************************/
-
-#define SDMA_GROUP_CONFIGURATION_REGISTER			0xb1f0
-#define CHANNEL0_CONFIGURATION_REGISTER				0x4000
-#define CHANNEL0_COMMAND_REGISTER				0x4008
-#define CHANNEL0_RX_CMD_STATUS					0x4800
-#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES		    0x4804
-#define CHANNEL0_RX_BUFFER_POINTER				0x4808
-#define CHANNEL0_RX_NEXT_POINTER				0x480c
-#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER		0x4810
-#define CHANNEL0_TX_CMD_STATUS					0x4C00
-#define CHANNEL0_TX_PACKET_SIZE					0x4C04
-#define CHANNEL0_TX_BUFFER_POINTER				0x4C08
-#define CHANNEL0_TX_NEXT_POINTER				0x4C0c
-#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER		0x4c10
-#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER			0x4c14
-/*
-#define CHANNEL1_CONFIGURATION_REGISTER				0x5000
-#define CHANNEL1_COMMAND_REGISTER				0x5008
-#define CHANNEL1_RX_CMD_STATUS					0x5800
-#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES		    0x5804
-#define CHANNEL1_RX_BUFFER_POINTER				0x5808
-#define CHANNEL1_RX_NEXT_POINTER				0x580c
-#define CHANNEL1_TX_CMD_STATUS					0x5C00
-#define CHANNEL1_TX_PACKET_SIZE					0x5C04
-#define CHANNEL1_TX_BUFFER_POINTER				0x5C08
-#define CHANNEL1_TX_NEXT_POINTER				0x5C0c
-#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER		0x5810
-#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER		0x5c10
-#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER			0x5c14
-#define CHANNEL2_CONFIGURATION_REGISTER				0x6000
-#define CHANNEL2_COMMAND_REGISTER				0x6008
-#define CHANNEL2_RX_CMD_STATUS					0x6800
-#define CHANNEL2_RX_PACKET_AND_BUFFER_SIZES		    0x6804
-#define CHANNEL2_RX_BUFFER_POINTER				0x6808
-#define CHANNEL2_RX_NEXT_POINTER				0x680c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER		0x6810
-#define CHANNEL2_TX_CMD_STATUS					0x6C00
-#define CHANNEL2_TX_PACKET_SIZE					0x6C04
-#define CHANNEL2_TX_BUFFER_POINTER				0x6C08
-#define CHANNEL2_TX_NEXT_POINTER				0x6C0c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER		0x6810
-#define CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER			0x6c10
-#define CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER			0x6c14
-*/
-/* SDMA Interrupt */
-/*
-#define SDMA_CAUSE							0xb820
-#define SDMA_MASK							0xb8a0
-*/
-/***************************************/
-/*	    SDMA Registers	       */
-/***************************************/
-
-#define SDMA_CONFIG_REG(channel)					(0x4000 + (channel<<13))
-#define SDMA_COMMAND_REG(channel)					(0x4008 + (channel<<13))
-#define SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)		(0x4810 + (channel<<13))
-#define SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
-#define SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
-
-#define SDMA_CAUSE_REG							0xb800
-#define SDMA_MASK_REG							0xb880
-
-/****************************************/
-/* Baude Rate Generators Registers	*/
-/****************************************/
-
-/* BRG 0 */
-#define BRG0_CONFIGURATION_REGISTER		0xb200
-#define BRG0_BAUDE_TUNING_REGISTER			 0xb204
-
-/* BRG 1 */
-#define BRG1_CONFIGURATION_REGISTER			0xb208
-#define BRG1_BAUDE_TUNING_REGISTER			 0xb20c
-
-/* BRG 2 */
-#define BRG2_CONFIGURATION_REGISTER			0xb210
-#define BRG2_BAUDE_TUNING_REGISTER			 0xb214
-
-/* BRG Interrupts */
-#define BRG_CAUSE_REGISTER					0xb834
-#define BRG_MASK_REGISTER					0xb8b4
-#define BRG_CONFIG_REG(brg)					(0xb200 + (brg<<3))
-#define BRG_BAUDE_TUNING_REG(brg)				(0xb208 + (brg<<3))
-#define BRG_CAUSE_REG						BRG_CAUSE_REGISTER  /*0xb8341 */
-#define BRG_MASK_REG						BRG_MASK_REGISTER  /*0xb8b41 */
-
-/* MISC */
-
-#define MAIN_ROUTING_REGISTER						0xb400
-#define RECEIVE_CLOCK_ROUTING_REGISTER				0xb404
-#define TRANSMIT_CLOCK_ROUTING_REGISTER				0xb408
-#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER	0xb40c
-
-/****************************************/
-/*	   Watchdog registers			*/
-/****************************************/
-#define WATCHDOG_CONFIGURATION_REGISTER			0xb410
-#define WATCHDOG_VALUE_REGISTER					0xb414
-#define WATCHDOG_CONFIG_REG					WATCHDOG_CONFIGURATION_REGISTER	 /*0xb4101 */
-#define WATCHDOG_VALUE_REG						WATCHDOG_VALUE_REGISTER	 /*0xb4141 */
-
-
-/****************************************/
-/* Flex TDM Registers			*/
-/****************************************/
-
-/* FTDM Port */
-
-#define FLEXTDM_TRANSMIT_READ_POINTER			    0xa800
-#define FLEXTDM_RECEIVE_READ_POINTER			    0xa804
-#define FLEXTDM_CONFIGURATION_REGISTER			    0xa808
-#define FLEXTDM_AUX_CHANNELA_TX_REGISTER		    0xa80c
-#define FLEXTDM_AUX_CHANNELA_RX_REGISTER		    0xa810
-#define FLEXTDM_AUX_CHANNELB_TX_REGISTER		    0xa814
-#define FLEXTDM_AUX_CHANNELB_RX_REGISTER		    0xa818
-
-/* FTDM Interrupts */
-
-#define FTDM_CAUSE_REGISTER				    0xb830
-#define FTDM_MASK_REGISTER				    0xb8b0
-
-
-/****************************************/
-/* GPP Interface Registers		*/
-/****************************************/
-
-#define GPP_IO_CONTROL						0xf100
-#define GPP_LEVEL_CONTROL					0xf110
-#define GPP_VALUE						0xf104
-#define GPP_INTERRUPT_CAUSE					0xf108
-#define GPP_INTERRUPT_MASK					0xf10c
-#define GPP_INTERRUPT_MASK0					GPP_INTERRUPT_MASK  /* 0xf10c1 */
-#define GPP_INTERRUPT_MASK1					0xf114
-#define GPP_VALUE_SET						0xf118
-#define GPP_VALUE_CLEAR						0xf11c
-
-/****************************************/
-/*	MPP Interface Registers		*/
-/****************************************/
-#define MPP_CONTROL0						0xf000
-#define MPP_CONTROL1						0xf004
-#define MPP_CONTROL2						0xf008
-#define MPP_CONTROL3						0xf00c
-#define DEBUG_PORT_MULTIPLEX					0xf014
- /*#define SERIAL_PORT_MULTIPLEX			       0xf0101 */
-
-/****************************************/
-/* Interrupt Controller Registers	*/
-/****************************************/
-
-/****************************************/
-/* Interrupts							*/
-/****************************************/
-/****************************************/
-/* Interrupts (checked I.A. 14.10.02)				*/
-/****************************************/
-
-#define LOW_INTERRUPT_CAUSE_REGISTER			0x004  /* gt64260: 0xc181 */
-#define HIGH_INTERRUPT_CAUSE_REGISTER			0x00c  /* gt64260: 0xc681 */
-#define CPU_INTERRUPT_MASK_REGISTER_LOW		0x014  /* gt64260: 0xc1c1 */
-#define CPU_INTERRUPT_MASK_REGISTER_HIGH		0x01c  /* gt64260: 0xc6c1 */
-#define CPU_SELECT_CAUSE_REGISTER			0x024  /* gt64260: 0xc701 */
-#define CPU_INTERRUPT_1_MASK_REGISTER_LOW		0x034  /* new in the MV64360 and MV64460 */
-#define CPU_INTERRUPT_1_MASK_REGISTER_HIGH		0x03c  /* new in the MV64360 and MV64460 */
-#define CPU_SELECT_1_CAUSE_REGISTER			0x044  /* new in the MV64360 and MV64460 */
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW	0x054  /* gt64260: 0xc241 */
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0x05c  /* gt64260: 0xc641 */
-#define PCI_0SELECT_CAUSE						0x064  /* gt64260: 0xc741 */
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW	0x074  /* gt64260: 0xca41 */
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0x07c  /* gt64260: 0xce41 */
-#define PCI_1SELECT_CAUSE						0x084  /* gt64260: 0xcf41 */
-/*#define CPU_INT_0_MASK						0xe60 signal is not multiplexed on MPP in the MV64360 and MV64460 */
-/*#define CPU_INT_1_MASK						0xe64 signal is not multiplexed on MPP in the MV64360 and MV64460 */
-/*#define CPU_INT_2_MASK						0xe68 signal is not multiplexed on MPP in the MV64360 and MV64460 */
-/*#define CPU_INT_3_MASK						0xe6c signal is not multiplexed on MPP in the MV64360 and MV64460 */
-
-#define MAIN_INTERRUPT_CAUSE_LOW				LOW_INTERRUPT_CAUSE_REGISTER  /* 0x0041 */
-#define MAIN_INTERRUPT_CAUSE_HIGH				HIGH_INTERRUPT_CAUSE_REGISTER  /* 0x00c1 */
-#define CPU_INTERRUPT0_MASK_LOW				CPU_INTERRUPT_MASK_REGISTER_LOW	 /* 0x0141 */
-#define CPU_INTERRUPT0_MASK_HIGH			CPU_INTERRUPT_MASK_REGISTER_HIGH  /*0x01c1 */
-#define CPU_INTERRUPT0_SELECT_CAUSE			CPU_SELECT_CAUSE_REGISTER  /* 0x0241 */
-#define CPU_INTERRUPT1_MASK_LOW				CPU_INTERRUPT_1_MASK_REGISTER_LOW  /* 0x0341 */
-#define CPU_INTERRUPT1_MASK_HIGH			CPU_INTERRUPT_1_MASK_REGISTER_HIGH  /* 0x03c1 */
-#define CPU_INTERRUPT1_SELECT_CAUSE			CPU_SELECT_1_CAUSE_REGISTER  /* 0x0441 */
-#define INTERRUPT0_MASK_0_LOW				PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW /* 0x0541 */
-#define INTERRUPT0_MASK_0_HIGH					PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH	 /* 0x05c1 */
-#define INTERRUPT0_SELECT_CAUSE				PCI_0SELECT_CAUSE  /* 0x0641 */
-#define INTERRUPT1_MASK_0_LOW					PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW	/* 0x0741 */
-#define INTERRUPT1_MASK_0_HIGH					PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH	 /* 0x07c1 */
-#define INTERRUPT1_SELECT_CAUSE				PCI_1SELECT_CAUSE  /* 0x0841 */
-
-/****************************************/
-/* I2C Registers			*/
-/****************************************/
-
-#define I2C_SLAVE_ADDRESS					0xc000
-#define I2C_EXTENDED_SLAVE_ADDRESS			0xc040
-#define I2C_DATA						0xc004
-#define I2C_CONTROL						0xc008
-#define I2C_STATUS_BAUDE_RATE					0xc00C
-#define I2C_SOFT_RESET						0xc01c
-#define I2C_SLAVE_ADDR						I2C_SLAVE_ADDRESS  /* 0xc0001 */
-#define I2C_EXTENDED_SLAVE_ADDR					I2C_EXTENDED_SLAVE_ADDRESS  /*0xc0101 */
-
-/****************************************/
-/* MPSC Registers			*/
-/****************************************/
-
-	/*  MPSCs Clocks Routing Registers  */
-
-#define MPSC_ROUTING_REG					0xb400
-#define MPSC_RX_CLOCK_ROUTING_REG			0xb404
-#define MPSC_TX_CLOCK_ROUTING_REG			0xb408
-
-	/*  MPSCs Interrupts Registers	  */
-
-#define MPSC_CAUSE_REG(port)					(0xb804 + (port<<3))
-#define MPSC_MASK_REG(port)					(0xb884 + (port<<3))
-
-#define MPSC_MAIN_CONFIG_LOW(port)			(0x8000 + (port<<12))
-#define MPSC_MAIN_CONFIG_HIGH(port)			(0x8004 + (port<<12))
-#define MPSC_PROTOCOL_CONFIG(port)			(0x8008 + (port<<12))
-#define MPSC_CHANNEL_REG1(port)					(0x800c + (port<<12))
-#define MPSC_CHANNEL_REG2(port)					(0x8010 + (port<<12))
-#define MPSC_CHANNEL_REG3(port)					(0x8014 + (port<<12))
-#define MPSC_CHANNEL_REG4(port)					(0x8018 + (port<<12))
-#define MPSC_CHANNEL_REG5(port)					(0x801c + (port<<12))
-#define MPSC_CHANNEL_REG6(port)					(0x8020 + (port<<12))
-#define MPSC_CHANNEL_REG7(port)					(0x8024 + (port<<12))
-#define MPSC_CHANNEL_REG8(port)					(0x8028 + (port<<12))
-#define MPSC_CHANNEL_REG9(port)					(0x802c + (port<<12))
-#define MPSC_CHANNEL_REG10(port)				(0x8030 + (port<<12))
-
-
-/* MPSC0  */
-
-#define MPSC0_MAIN_CONFIGURATION_LOW			    0x8000
-#define MPSC0_MAIN_CONFIGURATION_HIGH			    0x8004
-#define MPSC0_PROTOCOL_CONFIGURATION			    0x8008
-#define CHANNEL0_REGISTER1				    0x800c
-#define CHANNEL0_REGISTER2				    0x8010
-#define CHANNEL0_REGISTER3				    0x8014
-#define CHANNEL0_REGISTER4				    0x8018
-#define CHANNEL0_REGISTER5				    0x801c
-#define CHANNEL0_REGISTER6				    0x8020
-#define CHANNEL0_REGISTER7				    0x8024
-#define CHANNEL0_REGISTER8				    0x8028
-#define CHANNEL0_REGISTER9				    0x802c
-#define CHANNEL0_REGISTER10				    0x8030
-#define CHANNEL0_REGISTER11				    0x8034
-
-/* MPSC1  */
-
-#define MPSC1_MAIN_CONFIGURATION_LOW			    0x8840
-#define MPSC1_MAIN_CONFIGURATION_HIGH			    0x8844
-#define MPSC1_PROTOCOL_CONFIGURATION			    0x8848
-#define CHANNEL1_REGISTER1				    0x884c
-#define CHANNEL1_REGISTER2				    0x8850
-#define CHANNEL1_REGISTER3				    0x8854
-#define CHANNEL1_REGISTER4				    0x8858
-#define CHANNEL1_REGISTER5				    0x885c
-#define CHANNEL1_REGISTER6				    0x8860
-#define CHANNEL1_REGISTER7				    0x8864
-#define CHANNEL1_REGISTER8				    0x8868
-#define CHANNEL1_REGISTER9				    0x886c
-#define CHANNEL1_REGISTER10				    0x8870
-#define CHANNEL1_REGISTER11				    0x8874
-
-/* MPSC2  */
-
-#define MPSC2_MAIN_CONFIGURATION_LOW			    0x9040
-#define MPSC2_MAIN_CONFIGURATION_HIGH			    0x9044
-#define MPSC2_PROTOCOL_CONFIGURATION			    0x9048
-#define CHANNEL2_REGISTER1				    0x904c
-#define CHANNEL2_REGISTER2				    0x9050
-#define CHANNEL2_REGISTER3				    0x9054
-#define CHANNEL2_REGISTER4				    0x9058
-#define CHANNEL2_REGISTER5				    0x905c
-#define CHANNEL2_REGISTER6				    0x9060
-#define CHANNEL2_REGISTER7				    0x9064
-#define CHANNEL2_REGISTER8				    0x9068
-#define CHANNEL2_REGISTER9				    0x906c
-#define CHANNEL2_REGISTER10				    0x9070
-#define CHANNEL2_REGISTER11				    0x9074
-
-/* MPSCs Interupts  */
-
-#define MPSC0_CAUSE						0xb824
-#define MPSC0_MASK						0xb8a4
-#define MPSC1_CAUSE						0xb828
-#define MPSC1_MASK						0xb8a8
-#define MPSC2_CAUSE						0xb82c
-#define MPSC2_MASK						 0xb8ac
-
-/*******************************************/
-/*	    CUNIT  Registers		   */
-/*******************************************/
-
-	 /* Address Decoding Register Map */
-
-#define CUNIT_BASE_ADDR_REG0					0xf200
-#define CUNIT_BASE_ADDR_REG1					0xf208
-#define CUNIT_BASE_ADDR_REG2					0xf210
-#define CUNIT_BASE_ADDR_REG3					0xf218
-#define CUNIT_SIZE0						0xf204
-#define CUNIT_SIZE1						0xf20c
-#define CUNIT_SIZE2						0xf214
-#define CUNIT_SIZE3						0xf21c
-#define CUNIT_HIGH_ADDR_REMAP_REG0			0xf240
-#define CUNIT_HIGH_ADDR_REMAP_REG1			0xf244
-#define CUNIT_BASE_ADDR_ENABLE_REG			0xf250
-#define MPSC0_ACCESS_PROTECTION_REG			0xf254
-#define MPSC1_ACCESS_PROTECTION_REG			0xf258
-#define CUNIT_INTERNAL_SPACE_BASE_ADDR_REG	0xf25C
-
-	/*  Error Report Registers  */
-
-#define CUNIT_INTERRUPT_CAUSE_REG			0xf310
-#define CUNIT_INTERRUPT_MASK_REG			0xf314
-#define CUNIT_ERROR_ADDR					0xf318
-
-	/*  Cunit Control Registers */
-
-#define CUNIT_ARBITER_CONTROL_REG			0xf300
-#define CUNIT_CONFIG_REG					0xb40c
-#define CUNIT_CRROSBAR_TIMEOUT_REG			0xf304
-
-	/*  Cunit Debug Registers   */
-
-#define CUNIT_DEBUG_LOW						0xf340
-#define CUNIT_DEBUG_HIGH					0xf344
-#define CUNIT_MMASK						0xf380
-
-#endif /* __INCmv_gen_regh */
diff --git a/board/Marvell/include/pci.h b/board/Marvell/include/pci.h
deleted file mode 100644
index 8285d1578e..0000000000
--- a/board/Marvell/include/pci.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/* PCI.h - PCI functions header file */
-
-/* Copyright - Galileo technology. */
-
-#ifndef __INCpcih
-#define __INCpcih
-
-/* includes */
-
-#include"core.h"
-#include"memory.h"
-
-/* According to PCI REV 2.1 MAX agents allowed on the bus are -21- */
-#define PCI_MAX_DEVICES 22
-
-
-/* Macros */
-
-/* The next Macros configurate the initiator board (SELF) or any any agent on
-   the PCI to become: MASTER, response to MEMORY transactions , response to
-   IO transactions or TWO both MEMORY_IO transactions. Those configuration
-   are for both PCI0 and PCI1. */
-
-#define PCI_MEMORY_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,MEMORY_ENABLE |		     \
-	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
-
-#define PCI_IO_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,I_O_ENABLE |		     \
-	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
-
-#define PCI_SLAVE_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,MEMORY_ENABLE | I_O_ENABLE |   \
-	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
-
-#define PCI_DISABLE(host, deviceNumber) pciWriteConfigReg(host,		       \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,0xfffffff8  &		     \
-	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber))
-
-#define PCI_MASTER_ENABLE(host,deviceNumber) pciWriteConfigReg(host,	       \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,MASTER_ENABLE |		     \
-	  pciReadConfigReg(host,PCI_STATUS_AND_COMMAND,deviceNumber) )
-
-#define PCI_MASTER_DISABLE(deviceNumber) pciWriteConfigReg(host,	      \
-	  PCI_STATUS_AND_COMMAND,deviceNumber,~MASTER_ENABLE &		     \
-	  pciReadConfigReg(host,PCI_STATUS_AND_COMMAND,deviceNumber) )
-
-#define		MASTER_ENABLE			BIT2
-#define		MEMORY_ENABLE			BIT1
-#define		I_O_ENABLE			BIT0
-#define	    SELF		    32
-
-/* Agent on the PCI bus may have up to 6 BARS. */
-#define	    BAR0		    0x10
-#define	    BAR1		    0x14
-#define	    BAR2		    0x18
-#define	    BAR3		    0x1c
-#define	    BAR4		    0x20
-#define	    BAR5		    0x24
-#define		BAR_SEL_MEM_IO			BIT0
-#define		BAR_MEM_TYPE_32_BIT		NO_BIT
-#define		BAR_MEM_TYPE_BELOW_1M		       BIT1
-#define		BAR_MEM_TYPE_64_BIT			      BIT2
-#define		BAR_MEM_TYPE_RESERVED		      (BIT1 | BIT2)
-#define		BAR_MEM_TYPE_MASK		      (BIT1 | BIT2)
-#define		BAR_PREFETCHABLE				      BIT3
-#define		BAR_CONFIG_MASK			(BIT0 | BIT1 | BIT2 | BIT3)
-
-/* Defines for the access regions. */
-#define	    PREFETCH_ENABLE		    BIT12
-#define	    PREFETCH_DISABLE		    NO_BIT
-#define	    DELAYED_READ_ENABLE		    BIT13
-/* #define     CACHING_ENABLE		       BIT14 */
-/* aggressive prefetch: PCI slave prefetch two burst in advance*/
-#define	    AGGRESSIVE_PREFETCH		     BIT16
-/* read line aggresive prefetch: PCI slave prefetch two burst in advance*/
-#define	    READ_LINE_AGGRESSIVE_PREFETCH   BIT17
-/* read multiple aggresive prefetch: PCI slave prefetch two burst in advance*/
-#define	    READ_MULTI_AGGRESSIVE_PREFETCH  BIT18
-#define	    MAX_BURST_4			    NO_BIT
-#define	    MAX_BURST_8			    BIT20  /* Bits[21:20] = 01 */
-#define	    MAX_BURST_16		    BIT21  /* Bits[21:20] = 10 */
-#define	    PCI_BYTE_SWAP		    NO_BIT /* Bits[25:24] = 00 */
-#define	    PCI_NO_SWAP			    BIT24  /* Bits[25:24] = 01 */
-#define	    PCI_BYTE_AND_WORD_SWAP	    BIT25  /* Bits[25:24] = 10 */
-#define	    PCI_WORD_SWAP		   (BIT24 | BIT25) /* Bits[25:24] = 11 */
-#define	    PCI_ACCESS_PROTECT		    BIT28
-#define	    PCI_WRITE_PROTECT		    BIT29
-
-/* typedefs */
-
-typedef enum __pciAccessRegions{REGION0,REGION1,REGION2,REGION3,REGION4,REGION5,
-				REGION6,REGION7} PCI_ACCESS_REGIONS;
-
-typedef enum __pciAgentPrio{LOW_AGENT_PRIO,HI_AGENT_PRIO} PCI_AGENT_PRIO;
-typedef enum __pciAgentPark{PARK_ON_AGENT,DONT_PARK_ON_AGENT} PCI_AGENT_PARK;
-
-typedef enum __pciSnoopType{PCI_NO_SNOOP,PCI_SNOOP_WT,PCI_SNOOP_WB}
-			    PCI_SNOOP_TYPE;
-typedef enum __pciSnoopRegion{PCI_SNOOP_REGION0,PCI_SNOOP_REGION1,
-			      PCI_SNOOP_REGION2,PCI_SNOOP_REGION3}
-			      PCI_SNOOP_REGION;
-
-typedef enum __memPciHost{PCI_HOST0,PCI_HOST1} PCI_HOST;
-typedef enum __memPciRegion{PCI_REGION0,PCI_REGION1,
-			 PCI_REGION2,PCI_REGION3,
-			 PCI_IO}
-			 PCI_REGION;
-
-/*ronen 7/Dec/03 */
-typedef enum __pci_bar_windows{PCI_CS0_BAR, PCI_CS1_BAR, PCI_CS2_BAR,
-			       PCI_CS3_BAR, PCI_DEV_CS0_BAR, PCI_DEV_CS1_BAR,
-			       PCI_DEV_CS2_BAR, PCI_DEV_CS3_BAR, PCI_BOOT_CS_BAR,
-			       PCI_MEM_INT_REG_BAR, PCI_IO_INT_REG_BAR,
-			       PCI_P2P_MEM0_BAR, PCI_P2P_MEM1_BAR,
-			       PCI_P2P_IO_BAR, PCI_CPU_BAR, PCI_INT_SRAM_BAR,
-			       PCI_LAST_BAR} PCI_INTERNAL_BAR;
-
-typedef struct pciBar {
-    unsigned int detectBase;
-    unsigned int base;
-    unsigned int size;
-    unsigned int type;
-} PCI_BAR;
-
-typedef struct pciDevice {
-    PCI_HOST	     host;
-    char	    type[40];
-    unsigned int    deviceNum;
-    unsigned int    venID;
-    unsigned int    deviceID;
-    PCI_BAR bar[6];
-} PCI_DEVICE;
-
-typedef struct pciSelfBars {
-    unsigned int    SCS0Base;
-    unsigned int    SCS0Size;
-    unsigned int    SCS1Base;
-    unsigned int    SCS1Size;
-    unsigned int    SCS2Base;
-    unsigned int    SCS2Size;
-    unsigned int    SCS3Base;
-    unsigned int    SCS3Size;
-    unsigned int    internalMemBase;
-    unsigned int    internalIOBase;
-    unsigned int    CS0Base;
-    unsigned int    CS0Size;
-    unsigned int    CS1Base;
-    unsigned int    CS1Size;
-    unsigned int    CS2Base;
-    unsigned int    CS2Size;
-    unsigned int    CS3Base;
-    unsigned int    CS3Size;
-    unsigned int    CSBootBase;
-    unsigned int    CSBootSize;
-    unsigned int    P2PMem0Base;
-    unsigned int    P2PMem0Size;
-    unsigned int    P2PMem1Base;
-    unsigned int    P2PMem1Size;
-    unsigned int    P2PIOBase;
-    unsigned int    P2PIOSize;
-    unsigned int    CPUBase;
-    unsigned int    CPUSize;
-} PCI_SELF_BARS;
-
-/* read/write configuration registers on local PCI bus. */
-void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,
-		       unsigned int pciDevNum, unsigned int data);
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
-			       unsigned int pciDevNum);
-
-/* read/write configuration registers on another PCI bus. */
-void pciOverBridgeWriteConfigReg(PCI_HOST host,
-				 unsigned int regOffset,
-				 unsigned int pciDevNum,
-				 unsigned int busNum,unsigned int data);
-unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
-					unsigned int regOffset,
-					unsigned int pciDevNum,
-					unsigned int busNum);
-
-/* Performs full scane on both PCI and returns all detail possible on the
-   agents which exist on the bus. */
-void pciScanDevices(PCI_HOST host, PCI_DEVICE *pci0Detect,
-		    unsigned int numberOfElment);
-
-/*	Master`s memory space	*/
-bool pciMapSpace(PCI_HOST host, PCI_REGION region,
-		unsigned int remapBase,
-		unsigned int deviceBase,
-		unsigned int deviceLength);
-unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region);
-unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region);
-
-/*	Slave`s memory space   */
-void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank,
-		      unsigned int pci0Dram0Base, unsigned int pci0Dram0Size);
-
-
-/* PCI region options */
-
-bool  pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,
-	unsigned int features, unsigned int baseAddress,
-	unsigned int regionLength);
-
-void  pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region);
-
-/* PCI arbiter */
-
-bool pciArbiterEnable(PCI_HOST host);
-bool pciArbiterDisable(PCI_HOST host);
-bool pciSetArbiterAgentsPriority(PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5);
-bool pciSetArbiterAgentsPriority(PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5);
-bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
-			PCI_AGENT_PARK externalAgent0,
-			PCI_AGENT_PARK externalAgent1,
-			PCI_AGENT_PARK externalAgent2,
-			PCI_AGENT_PARK externalAgent3,
-			PCI_AGENT_PARK externalAgent4,
-			PCI_AGENT_PARK externalAgent5);
-bool pciEnableBrokenAgentDetection(PCI_HOST host, unsigned char brokenValue);
-bool pciEnableBrokenAgentDetection(PCI_HOST host, unsigned char brokenValue);
-
-/* PCI-to-PCI (P2P) */
-
-bool pciP2PConfig(PCI_HOST host,
-		  unsigned int SecondBusLow,unsigned int SecondBusHigh,
-		  unsigned int busNum,unsigned int devNum);
-/* PCI Cache-coherency */
-
-bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,
-			    PCI_SNOOP_TYPE snoopType,
-			    unsigned int baseAddress,
-			    unsigned int regionLength);
-
-PCI_DEVICE * pciFindDevice(unsigned short ven, unsigned short dev);
-
-#endif /* __INCpcih */
diff --git a/board/adder/Makefile b/board/adder/Makefile
deleted file mode 100644
index b2ffd28833..0000000000
--- a/board/adder/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/adder/adder.c b/board/adder/adder.c
deleted file mode 100644
index aa7815848c..0000000000
--- a/board/adder/adder.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) 2004-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Analogue&Micro Adder boards family.
- * Tested on AdderII and Adder87x.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/*
- * SDRAM is single Samsung K4S643232F-T70   chip (8MB)
- *       or single Micron  MT48LC4M32B2TG-7 chip (16MB).
- * Minimal CPU frequency is 40MHz.
- */
-static uint sdram_table[] = {
-	/* Single read	(offset 0x00 in UPM RAM) */
-	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
-	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
-
-	/* Burst read	(offset 0x08 in UPM RAM) */
-	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
-	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
-	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
-	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
-
-	/* Single write (offset 0x18 in UPM RAM) */
-	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
-	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Burst write	(offset 0x20 in UPM RAM) */
-	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Refresh	(offset 0x30 in UPM RAM) */
-	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Exception	(offset 0x3C in UPM RAM) */
-	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
-};
-
-long int initdram (int board_type)
-{
-	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/* Configure SDRAM refresh */
-	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
-
-	memctl->memc_mamr = (94 << 24) | CFG_MAMR; /* No refresh */
-	udelay(200);
-
-	/* Run precharge from location 0x15 */
-	memctl->memc_mar = 0x0;
-	memctl->memc_mcr = 0x80002115;
-	udelay(200);
-
-	/* Run 8 refresh cycles */
-	memctl->memc_mcr = 0x80002830;
-	udelay(200);
-
-	/* Run MRS pattern from location 0x16 */
-	memctl->memc_mar = 0x88;
-	memctl->memc_mcr = 0x80002116;
-	udelay(200);
-
-	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
-
-	msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
-	memctl->memc_or1  |= ~(msize - 1);
-
-	return msize;
-}
-
-int checkboard( void )
-{
-	puts("Board: Adder");
-#if defined(CONFIG_MPC885_FAMILY)
-	puts("87x\n");
-#elif defined(CONFIG_MPC866_FAMILY)
-	puts("II\n");
-#endif
-
-	return 0;
-}
diff --git a/board/adder/config.mk b/board/adder/config.mk
deleted file mode 100644
index 4691a69ef1..0000000000
--- a/board/adder/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Analogue&Micro Adder boards family
-#
-TEXT_BASE = 0xFE000000
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
deleted file mode 100644
index 66c324625a..0000000000
--- a/board/adder/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp        : { *(.interp)		}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt           : { *(.plt)		}
-  .text          :
-  {
-    cpu/mpc8xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile
deleted file mode 100644
index 214c7dbe45..0000000000
--- a/board/adsvix/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= adsvix.o pcmcia.o
-SOBJS	:= lowlevel_init.o pxavoltage.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c
deleted file mode 100644
index c430d634e1..0000000000
--- a/board/adsvix/adsvix.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of ADSVIX-Board */
-	gd->bd->bi_arch_number = 620;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa000003c;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
-	return 0;
-}
diff --git a/board/adsvix/config.mk b/board/adsvix/config.mk
deleted file mode 100644
index 98be4ebe00..0000000000
--- a/board/adsvix/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0xa1700000
diff --git a/board/adsvix/lowlevel_init.S b/board/adsvix/lowlevel_init.S
deleted file mode 100644
index 8dea71c356..0000000000
--- a/board/adsvix/lowlevel_init.S
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * This was originally from the Lubbock u-boot port.
- *
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-/* wait for coprocessor write complete */
-   .macro CPWAIT reg
-   mrc	p15,0,\reg,c2,c0,0
-   mov	\reg,\reg
-   sub	pc,pc,#4
-   .endm
-
-
-/*
- *	Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/* Set up GPIO pins first ----------------------------------------- */
-
-	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR3
-	ldr		r1,	=CFG_GPSR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR3
-	ldr		r1,	=CFG_GPCR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR3
-	ldr		r1,	=CFG_GPDR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR3_L
-	ldr		r1,	=CFG_GAFR3_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR3_U
-	ldr		r1,	=CFG_GAFR3_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
-	str		r1,   [r0]
-
-	/* ---------------------------------------------------------------- */
-	/* Enable memory interface					    */
-	/*								    */
-	/* The sequence below is based on the recommended init steps	    */
-	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
-	/* Chapter 10.							    */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 1: Wait for at least 200 microsedonds to allow internal	    */
-	/*	   clocks to settle. Only necessary after hard reset...	    */
-	/*	   FIXME: can be optimized later			    */
-	/* ---------------------------------------------------------------- */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty	    */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-mem_init:
-
-	ldr	r1,  =MEMC_BASE		/* get memory controller base addr. */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2a: Initialize Asynchronous static memory controller	    */
-	/* ---------------------------------------------------------------- */
-
-	/* MSC registers: timing, bus width, mem type			    */
-
-	/* MSC0: nCS(0,1)						    */
-	ldr	r2,   =CFG_MSC0_VAL
-	str	r2,   [r1, #MSC0_OFFSET]
-	ldr	r2,   [r1, #MSC0_OFFSET]	/* read back to ensure	    */
-						/* that data latches	    */
-	/* MSC1: nCS(2,3)						    */
-	ldr	r2,  =CFG_MSC1_VAL
-	str	r2,  [r1, #MSC1_OFFSET]
-	ldr	r2,  [r1, #MSC1_OFFSET]
-
-	/* MSC2: nCS(4,5)						    */
-	ldr	r2,  =CFG_MSC2_VAL
-	str	r2,  [r1, #MSC2_OFFSET]
-	ldr	r2,  [r1, #MSC2_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2b: Initialize Card Interface				    */
-	/* ---------------------------------------------------------------- */
-
-	/* MECR: Memory Expansion Card Register				    */
-	ldr	r2,  =CFG_MECR_VAL
-	str	r2,  [r1, #MECR_OFFSET]
-	ldr	r2,	[r1, #MECR_OFFSET]
-
-	/* MCMEM0: Card Interface slot 0 timing				    */
-	ldr	r2,  =CFG_MCMEM0_VAL
-	str	r2,  [r1, #MCMEM0_OFFSET]
-	ldr	r2,	[r1, #MCMEM0_OFFSET]
-
-	/* MCMEM1: Card Interface slot 1 timing				    */
-	ldr	r2,  =CFG_MCMEM1_VAL
-	str	r2,  [r1, #MCMEM1_OFFSET]
-	ldr	r2,	[r1, #MCMEM1_OFFSET]
-
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0	    */
-	ldr	r2,  =CFG_MCATT0_VAL
-	str	r2,  [r1, #MCATT0_OFFSET]
-	ldr	r2,	[r1, #MCATT0_OFFSET]
-
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1	    */
-	ldr	r2,  =CFG_MCATT1_VAL
-	str	r2,  [r1, #MCATT1_OFFSET]
-	ldr	r2,	[r1, #MCATT1_OFFSET]
-
-	/* MCIO0: Card Interface I/O Space Timing, slot 0		    */
-	ldr	r2,  =CFG_MCIO0_VAL
-	str	r2,  [r1, #MCIO0_OFFSET]
-	ldr	r2,	[r1, #MCIO0_OFFSET]
-
-	/* MCIO1: Card Interface I/O Space Timing, slot 1		    */
-	ldr	r2,  =CFG_MCIO1_VAL
-	str	r2,  [r1, #MCIO1_OFFSET]
-	ldr	r2,	[r1, #MCIO1_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2c: Write FLYCNFG  FIXME: what's that???		    */
-	/* ---------------------------------------------------------------- */
-	ldr	r2,  =CFG_FLYCNFG_VAL
-	str	r2,  [r1, #FLYCNFG_OFFSET]
-	str	r2,	[r1, #FLYCNFG_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)		    */
-	/* ---------------------------------------------------------------- */
-
-	/* Before accessing MDREFR we need a valid DRI field, so we set	    */
-	/* this to power on defaults + DRI field.			    */
-
-	ldr	r4,	[r1, #MDREFR_OFFSET]
-	ldr	r2,	=0xFFF
-	bic	r4,	r4, r2
-
-	ldr	r3,	=CFG_MDREFR_VAL
-	and	r3,	r3,  r2
-
-	orr	r4,	r4, r3
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR	    */
-
-	orr	r4,  r4, #MDREFR_K0RUN
-	orr	r4,  r4, #MDREFR_K0DB4
-	orr	r4,  r4, #MDREFR_K0FREE
-	orr	r4,  r4, #MDREFR_K0DB2
-	orr	r4,  r4, #MDREFR_K1DB2
-	bic	r4,  r4, #MDREFR_K1FREE
-	bic	r4,  r4, #MDREFR_K2FREE
-
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR	    */
-	ldr	r4,  [r1, #MDREFR_OFFSET]
-
-	/* Note: preserve the mdrefr value in r4			    */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
-	/* ---------------------------------------------------------------- */
-
-	/* Initialize SXCNFG register. Assert the enable bits		    */
-
-	/* Write SXMRS to cause an MRS command to all enabled banks of	    */
-	/* synchronous static memory. Note that SXLCR need not be written   */
-	/* at this time.						    */
-
-	ldr	r2,  =CFG_SXCNFG_VAL
-	str	r2,  [r1, #SXCNFG_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 4: Initialize SDRAM					    */
-	/* ---------------------------------------------------------------- */
-
-	bic	r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE)
-
-	orr	r4, r4, #MDREFR_K1RUN
-	bic	r4, r4, #MDREFR_K2DB2
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	bic	r4, r4, #MDREFR_SLFRSH
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	orr	r4, r4, #MDREFR_E1PIN
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	nop
-	nop
-
-
-	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
-	/*	    configure but not enable each SDRAM partition pair.	    */
-
-	ldr	r4,	=CFG_MDCNFG_VAL
-	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
-	bic	r4,	r4,	#(MDCNFG_DE2|MDCNFG_DE3)
-
-	str	r4,	[r1, #MDCNFG_OFFSET]	/* write back MDCNFG	    */
-	ldr	r4,	[r1, #MDCNFG_OFFSET]
-
-
-	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,	    */
-	/*	    100..200 µsec.					    */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty	    */
-1:
-	    ldr r2, [r3]
-	    cmp r4, r2
-	    bgt 1b
-
-
-	/* Step 4f: Trigger a number (usually 8) refresh cycles by	    */
-	/*	    attempting non-burst read or write accesses to disabled */
-	/*	    SDRAM, as commonly specified in the power up sequence   */
-	/*	    documented in SDRAM data sheets. The address(es) used   */
-	/*	    for this purpose must not be cacheable.		    */
-
-	ldr	r3,	=CFG_DRAM_BASE
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-
-
-	/* Step 4g: Write MDCNFG with enable bits asserted		    */
-	/*	    (MDCNFG:DEx set to 1).				    */
-
-	ldr	r3,	[r1, #MDCNFG_OFFSET]
-	mov	r4, r3
-	orr	r3,	r3,	#MDCNFG_DE0
-	str	r3,	[r1, #MDCNFG_OFFSET]
-	mov	r0, r3
-
-	/* Step 4h: Write MDMRS.					    */
-
-	ldr	r2,  =CFG_MDMRS_VAL
-	str	r2,  [r1, #MDMRS_OFFSET]
-
-	/* enable APD */
-	ldr	r3,  [r1, #MDREFR_OFFSET]
-	orr	r3,  r3,  #MDREFR_APD
-	str	r3,  [r1, #MDREFR_OFFSET]
-
-	/* We are finished with Intel's memory controller initialisation    */
-
-setvoltage:
-
-	mov	r10,	lr
-	bl	initPXAvoltage	/* In case the board is rebooting with a    */
-	mov	lr,	r10	/* low voltage raise it up to a good one.   */
-
-wakeup:
-	/* Are we waking from sleep? */
-	ldr	r0,	=RCSR
-	ldr	r1,	[r0]
-	and	r1,	r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
-	str	r1,	[r0]
-	teq	r1,	#RCSR_SMR
-
-	bne	initirqs
-
-	ldr	r0,	=PSSR
-	mov	r1,	#PSSR_PH
-	str	r1,	[r0]
-
-	/* if so, resume at PSPR */
-	ldr	r0,	=PSPR
-	ldr	r1,	[r0]
-	mov	pc,	r1
-
-	/* ---------------------------------------------------------------- */
-	/* Disable (mask) all interrupts at interrupt controller	    */
-	/* ---------------------------------------------------------------- */
-
-initirqs:
-
-	mov	r1,  #0		/* clear int. level register (IRQ, not FIQ) */
-	ldr	r2,  =ICLR
-	str	r1,  [r2]
-
-	ldr	r2,  =ICMR	/* mask all interrupts at the controller    */
-	str	r1,  [r2]
-
-	/* ---------------------------------------------------------------- */
-	/* Clock initialisation						    */
-	/* ---------------------------------------------------------------- */
-
-initclks:
-
-	/* Disable the peripheral clocks, and set the core clock frequency  */
-
-	/* Turn Off on-chip peripheral clocks (except for memory)	    */
-	/* for re-configuration.					    */
-	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN
-	str	r2,  [r1]
-
-	/* ... and write the core clock config register			    */
-	ldr	r2,  =CFG_CCCR
-	ldr	r1,  =CCCR
-	str	r2,  [r1]
-
-	/* Turn on turbo mode */
-	mrc	p14, 0, r2, c6, c0, 0
-	orr	r2, r2, #0xB		/* Turbo, Fast-Bus, Freq change**/
-	mcr	p14, 0, r2, c6, c0, 0
-
-	/* Re-write MDREFR */
-	ldr	r1, =MEMC_BASE
-	ldr	r2, [r1, #MDREFR_OFFSET]
-	str	r2, [r1, #MDREFR_OFFSET]
-#ifdef RTC
-	/* enable the 32Khz oscillator for RTC and PowerManager		    */
-	ldr	r1,  =OSCC
-	mov	r2,  #OSCC_OON
-	str	r2,  [r1]
-
-	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL	    */
-	/* has settled.							    */
-60:
-	ldr	r2, [r1]
-	ands	r2, r2, #1
-	beq	60b
-#else
-#error "RTC not defined"
-#endif
-
-	/* Interrupt init: Mask all interrupts				    */
-    ldr r0, =ICMR /* enable no sources */
-	mov r1, #0
-    str r1, [r0]
-	/* FIXME */
-
-#ifdef NODEBUG
-	/*Disable software and data breakpoints */
-	mov	r0,#0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/*Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* End lowlevel_init							    */
-	/* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
-	mov	pc, lr
diff --git a/board/adsvix/pcmcia.c b/board/adsvix/pcmcia.c
deleted file mode 100644
index 5197680194..0000000000
--- a/board/adsvix/pcmcia.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-void pcmcia_power_on(void)
-{
-#warning "Board will only supply 5V, wait for next HW spin for selectable power"
-	/* 5.0V */
-	GPCR(81) = GPIO_bit(81);
-	GPCR(82) = GPIO_bit(82);
-
-	udelay(300000);
-
-	/* reset the card */
-	GPSR(52) = GPIO_bit(52);
-
-	/* enable PCMCIA */
-	GPCR(83) = GPIO_bit(83);
-
-	/* clear reset */
-	udelay(10);
-	GPCR(52) = GPIO_bit(52);
-
-	udelay(20000);
-}
-
-void pcmcia_power_off(void)
-{
-	/* 0V */
-	GPSR(81) = GPIO_bit(81);
-	GPSR(82) = GPIO_bit(82);
-	/* disable PCMCIA */
-	GPSR(83) = GPIO_bit(83);
-}
diff --git a/board/adsvix/pxavoltage.S b/board/adsvix/pxavoltage.S
deleted file mode 100644
index 2fe1cabd7c..0000000000
--- a/board/adsvix/pxavoltage.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-
-#define LTC1663_ADDR    0x20
-
-#define LTC1663_SY	0x01	/* Sync ACK */
-#define LTC1663_SD	0x04	/* shutdown */
-#define LTC1663_BG	0x04	/* Internal Voltage Ref */
-
-#define VOLT_1_55         18    /* DAC value for 1.55V */
-
-		.global	initPXAvoltage
-
-@ Set the voltage to 1.55V early in the boot process so we can run
-@ at a high clock speed and boot quickly.  Note that this is necessary
-@ because the reset button does not reset the CPU voltage, so if the
-@ voltage was low (say 0.85V) then the CPU would crash without this
-@ routine
-
-@ This routine clobbers r0-r4
-
-initializei2c:
-
-		ldr	r2, =CKEN
-		ldr	r3, [r2]
-		orr	r3, r3, #CKEN15_PWRI2C
-		str	r3, [r2]
-
-		ldr	r2, =PCFR
-		ldr	r3, [r2]
-		orr	r3, r3, #PCFR_PI2C_EN
-		str	r3, [r2]
-
-		/* delay for about 250msec
-		 */
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC0000
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		ldr	r0, =PWRICR
-		ldr	r1, [r0]
-		bic	r1, r1, #(ICR_MA | ICR_START | ICR_STOP)
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_UR
-		str	r1, [r0]
-
-		ldr	r2, =PWRISR
-		ldr	r3, =0x7ff
-		str	r3, [r2]
-
-		bic	r1, r1, #ICR_UR
-		str	r1, [r0]
-
-		mov	r1, #(ICR_GCD | ICR_SCLE)
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_IUE
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_FM
-		str	r1, [r0]
-
-		/* delay for about 1msec
-		 */
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC00
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		mov	pc, lr
-
-sendbytei2c:
-		ldr	r3, =PWRIDBR
-		str	r0, [r3]
-		ldr	r3, =PWRICR
-		ldr	r0, [r3]
-		orr	r0, r0, r1
-		bic	r0, r0, r2
-		str	r0, [r3]
-		orr	r0, r0, #ICR_TB
-		str	r0, [r3]
-
-		mov	r2, #0x100000
-
-waitfortxemptyi2c:
-
-		ldr	r0, =PWRISR
-		ldr	r1, [r0]
-
-		/* take it from the top if we don't get empty after a while */
-		subs	r2, r2, #1
-		moveq	lr, r4
-		beq	initPXAvoltage
-
-		tst	r1, #ISR_ITE
-
-		beq	waitfortxemptyi2c
-
-		orr	r1, r1, #ISR_ITE
-		str	r1, [r0]
-
-		mov	pc, lr
-
-initPXAvoltage:
-
-		mov	r4, lr
-
-		bl	setleds
-
-		bl	initializei2c
-
-		bl	setleds
-
-		/* now send the real message to set the correct voltage */
-		ldr	r0, =LTC1663_ADDR
-		mov	r0, r0, LSL #1
-		mov	r1, #ICR_START
-		ldr	r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		mov	r0, #LTC1663_BG
-		mov	r1, #0
-		mov	r2, #(ICR_STOP | ICR_START)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		ldr	r0, =VOLT_1_55
-		and	r0, r0, #0xff
-		mov	r1, #0
-		mov	r2, #(ICR_STOP | ICR_START)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		ldr	r0, =VOLT_1_55
-		mov	r0, r0, ASR #8
-		and	r0, r0, #0xff
-		mov	r1, #ICR_STOP
-		mov	r2, #ICR_START
-		bl	sendbytei2c
-
-		bl	setleds
-
-		@ delay a little for the volatage to stablize
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC0
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		mov	pc, r4
-
-setleds:
-	mov		pc, lr
-
-	ldr		r5, =0x40e00058
-	ldr		r3, [r5]
-	bic		r3, r3, #0x3
-	str		r3, [r5]
-	ldr		r5, =0x40e0000c
-	ldr		r3, [r5]
-	orr		r3, r3, #0x00010000
-	str		r3, [r5]
-
-	@ inner loop
-	mov		r0, #0x2
-1:
-
-	ldr		r5, =0x40e00018
-	mov		r3, #0x00010000
-	str		r3, [r5]
-
-	@ outer loop
-	mov		r3, #0x00F00000
-2:
-	subs		r3, r3, #1
-	bne		2b
-
-	ldr		r5, =0x40e00024
-	mov		r3, #0x00010000
-	str		r3, [r5]
-
-	@ outer loop
-	mov		r3, #0x00F00000
-3:
-	subs		r3, r3, #1
-	bne		3b
-
-	subs		r0, r0, #1
-	bne		1b
-
-	mov		pc, lr
diff --git a/board/adsvix/u-boot.lds b/board/adsvix/u-boot.lds
deleted file mode 100644
index f0102391b3..0000000000
--- a/board/adsvix/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/pxa/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
deleted file mode 100644
index 7a8caf7c11..0000000000
--- a/board/altera/ep1c20/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS	:= $(BOARD).o $(COMOBJS)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/ep1c20/config.mk b/board/altera/ep1c20/config.mk
deleted file mode 100644
index dab2740830..0000000000
--- a/board/altera/ep1c20/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/ep1c20/ep1c20.c b/board/altera/ep1c20/ep1c20.c
deleted file mode 100644
index 29491391ef..0000000000
--- a/board/altera/ep1c20/ep1c20.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("BOARD : Altera EP-1C20\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	return (0);
-}
diff --git a/board/altera/ep1c20/u-boot.lds b/board/altera/ep1c20/u-boot.lds
deleted file mode 100644
index b99b82c826..0000000000
--- a/board/altera/ep1c20/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-littlenios2")
-OUTPUT_ARCH(nios2)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  cpu/nios2/start.o (.text)
-	  *(.text)
-	  *(.text.*)
-	  *(.gnu.linkonce.t*)
-	  *(.rodata)
-	  *(.rodata.*)
-	  *(.gnu.linkonce.r*)
-	}
-	. = ALIGN (4);
-	_etext = .;
-	PROVIDE (etext = .);
-
-	/* CMD TABLE - sandwich this in between text and data so
-	 * the initialization code relocates the command table as
-	 * well -- admittedly, this is just pure laziness ;-)
-	 */
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	/* INIT DATA sections - "Small" data (see the gcc -G option)
-	 * is always gp-relative. Here we make all init data sections
-	 * adjacent to simplify the startup code -- and provide
-	 * the global pointer for gp-relative access.
-	 */
-	_data = .;
-	.data :
-	{
-	  *(.data)
-	  *(.data.*)
-	  *(.gnu.linkonce.d*)
-	}
-
-	. = ALIGN(16);
-	_gp = .;			/* Global pointer addr */
-	PROVIDE (gp = .);
-
-	.sdata :
-	{
-	  *(.sdata)
-	  *(.sdata.*)
-	  *(.gnu.linkonce.s.*)
-	}
-	. = ALIGN(4);
-
-	_edata = .;
-	PROVIDE (edata = .);
-
-	/* UNINIT DATA - Small uninitialized data is first so it's
-	 * adjacent to sdata and can be referenced via gp. The normal
-	 * bss follows. We keep it adjacent to simplify init code.
-	 */
-	__bss_start = .;
-	.sbss :
-	{
-	  *(.sbss)
-	  *(.sbss.*)
-	  *(.gnu.linkonce.sb.*)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	.bss :
-	{
-	  *(.bss)
-	  *(.bss.*)
-	  *(.dynbss)
-	  *(COMMON)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	_end = .;
-	PROVIDE (end = .);
-
-	/* DEBUG -- symbol table, string table, etc. etc.
-	 */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug		0 : { *(.debug) }
-	.line		0 : { *(.line) }
-	.debug_srcinfo	0 : { *(.debug_srcinfo) }
-	.debug_sfnames	0 : { *(.debug_sfnames) }
-	.debug_aranges	0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_info	0 : { *(.debug_info) }
-	.debug_abbrev	0 : { *(.debug_abbrev) }
-	.debug_line	0 : { *(.debug_line) }
-	.debug_frame	0 : { *(.debug_frame) }
-	.debug_str	0 : { *(.debug_str) }
-	.debug_loc	0 : { *(.debug_loc) }
-	.debug_macinfo	0 : { *(.debug_macinfo) }
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames	 0 : { *(.debug_varnames) }
-}
diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
deleted file mode 100644
index 7a8caf7c11..0000000000
--- a/board/altera/ep1s10/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS	:= $(BOARD).o $(COMOBJS)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/ep1s10/config.mk b/board/altera/ep1s10/config.mk
deleted file mode 100644
index dab2740830..0000000000
--- a/board/altera/ep1s10/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/ep1s10/ep1s10.c b/board/altera/ep1s10/ep1s10.c
deleted file mode 100644
index 9c7e28e68c..0000000000
--- a/board/altera/ep1s10/ep1s10.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("BOARD : Altera EP-1S10\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	return (0);
-}
diff --git a/board/altera/ep1s10/u-boot.lds b/board/altera/ep1s10/u-boot.lds
deleted file mode 100644
index b99b82c826..0000000000
--- a/board/altera/ep1s10/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-littlenios2")
-OUTPUT_ARCH(nios2)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  cpu/nios2/start.o (.text)
-	  *(.text)
-	  *(.text.*)
-	  *(.gnu.linkonce.t*)
-	  *(.rodata)
-	  *(.rodata.*)
-	  *(.gnu.linkonce.r*)
-	}
-	. = ALIGN (4);
-	_etext = .;
-	PROVIDE (etext = .);
-
-	/* CMD TABLE - sandwich this in between text and data so
-	 * the initialization code relocates the command table as
-	 * well -- admittedly, this is just pure laziness ;-)
-	 */
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	/* INIT DATA sections - "Small" data (see the gcc -G option)
-	 * is always gp-relative. Here we make all init data sections
-	 * adjacent to simplify the startup code -- and provide
-	 * the global pointer for gp-relative access.
-	 */
-	_data = .;
-	.data :
-	{
-	  *(.data)
-	  *(.data.*)
-	  *(.gnu.linkonce.d*)
-	}
-
-	. = ALIGN(16);
-	_gp = .;			/* Global pointer addr */
-	PROVIDE (gp = .);
-
-	.sdata :
-	{
-	  *(.sdata)
-	  *(.sdata.*)
-	  *(.gnu.linkonce.s.*)
-	}
-	. = ALIGN(4);
-
-	_edata = .;
-	PROVIDE (edata = .);
-
-	/* UNINIT DATA - Small uninitialized data is first so it's
-	 * adjacent to sdata and can be referenced via gp. The normal
-	 * bss follows. We keep it adjacent to simplify init code.
-	 */
-	__bss_start = .;
-	.sbss :
-	{
-	  *(.sbss)
-	  *(.sbss.*)
-	  *(.gnu.linkonce.sb.*)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	.bss :
-	{
-	  *(.bss)
-	  *(.bss.*)
-	  *(.dynbss)
-	  *(COMMON)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	_end = .;
-	PROVIDE (end = .);
-
-	/* DEBUG -- symbol table, string table, etc. etc.
-	 */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug		0 : { *(.debug) }
-	.line		0 : { *(.line) }
-	.debug_srcinfo	0 : { *(.debug_srcinfo) }
-	.debug_sfnames	0 : { *(.debug_sfnames) }
-	.debug_aranges	0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_info	0 : { *(.debug_info) }
-	.debug_abbrev	0 : { *(.debug_abbrev) }
-	.debug_line	0 : { *(.debug_line) }
-	.debug_frame	0 : { *(.debug_frame) }
-	.debug_str	0 : { *(.debug_str) }
-	.debug_loc	0 : { *(.debug_loc) }
-	.debug_macinfo	0 : { *(.debug_macinfo) }
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames	 0 : { *(.debug_varnames) }
-}
diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
deleted file mode 100644
index 7a8caf7c11..0000000000
--- a/board/altera/ep1s40/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS	:= $(BOARD).o $(COMOBJS)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/ep1s40/config.mk b/board/altera/ep1s40/config.mk
deleted file mode 100644
index dab2740830..0000000000
--- a/board/altera/ep1s40/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/ep1s40/ep1s40.c b/board/altera/ep1s40/ep1s40.c
deleted file mode 100644
index cb75550476..0000000000
--- a/board/altera/ep1s40/ep1s40.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-int checkboard (void)
-{
-	puts ("BOARD : Altera EP-1S40\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	return (0);
-}
diff --git a/board/altera/ep1s40/u-boot.lds b/board/altera/ep1s40/u-boot.lds
deleted file mode 100644
index b99b82c826..0000000000
--- a/board/altera/ep1s40/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-littlenios2")
-OUTPUT_ARCH(nios2)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  cpu/nios2/start.o (.text)
-	  *(.text)
-	  *(.text.*)
-	  *(.gnu.linkonce.t*)
-	  *(.rodata)
-	  *(.rodata.*)
-	  *(.gnu.linkonce.r*)
-	}
-	. = ALIGN (4);
-	_etext = .;
-	PROVIDE (etext = .);
-
-	/* CMD TABLE - sandwich this in between text and data so
-	 * the initialization code relocates the command table as
-	 * well -- admittedly, this is just pure laziness ;-)
-	 */
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	/* INIT DATA sections - "Small" data (see the gcc -G option)
-	 * is always gp-relative. Here we make all init data sections
-	 * adjacent to simplify the startup code -- and provide
-	 * the global pointer for gp-relative access.
-	 */
-	_data = .;
-	.data :
-	{
-	  *(.data)
-	  *(.data.*)
-	  *(.gnu.linkonce.d*)
-	}
-
-	. = ALIGN(16);
-	_gp = .;			/* Global pointer addr */
-	PROVIDE (gp = .);
-
-	.sdata :
-	{
-	  *(.sdata)
-	  *(.sdata.*)
-	  *(.gnu.linkonce.s.*)
-	}
-	. = ALIGN(4);
-
-	_edata = .;
-	PROVIDE (edata = .);
-
-	/* UNINIT DATA - Small uninitialized data is first so it's
-	 * adjacent to sdata and can be referenced via gp. The normal
-	 * bss follows. We keep it adjacent to simplify init code.
-	 */
-	__bss_start = .;
-	.sbss :
-	{
-	  *(.sbss)
-	  *(.sbss.*)
-	  *(.gnu.linkonce.sb.*)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	.bss :
-	{
-	  *(.bss)
-	  *(.bss.*)
-	  *(.dynbss)
-	  *(COMMON)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	_end = .;
-	PROVIDE (end = .);
-
-	/* DEBUG -- symbol table, string table, etc. etc.
-	 */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug		0 : { *(.debug) }
-	.line		0 : { *(.line) }
-	.debug_srcinfo	0 : { *(.debug_srcinfo) }
-	.debug_sfnames	0 : { *(.debug_sfnames) }
-	.debug_aranges	0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_info	0 : { *(.debug_info) }
-	.debug_abbrev	0 : { *(.debug_abbrev) }
-	.debug_line	0 : { *(.debug_line) }
-	.debug_frame	0 : { *(.debug_frame) }
-	.debug_str	0 : { *(.debug_str) }
-	.debug_loc	0 : { *(.debug_loc) }
-	.debug_macinfo	0 : { *(.debug_macinfo) }
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames	 0 : { *(.debug_varnames) }
-}
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
deleted file mode 100644
index 06ef7f9331..0000000000
--- a/board/amcc/sequoia/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o sdram.o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
deleted file mode 100644
index e62b8d30e4..0000000000
--- a/board/amcc/sequoia/config.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# AMCC 440EPx Reference Platform (Sequoia) board
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
deleted file mode 100644
index 45bcd4bef7..0000000000
--- a/board/amcc/sequoia/init.S
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-#define _256M       0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-#ifndef CONFIG_NAND_SPL
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
-#else
-	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
-#endif
-
-	/* TLB-entry for DDR SDRAM (Up to 2GB) */
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-
-#ifdef CFG_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
-#endif
-
-	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
-
-	/* TLB-entry for EBC */
-	tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-
-	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-
-	/* TLB-entry for Internal Registers & OCM */
-	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
-
-	/*TLB-entry PCI registers*/
-	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
-
-	/* TLB-entry for peripherals */
-	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-
-	tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-	/*
-	 * For NAND booting the first TLB has to be reconfigured to full size
-	 * and with caching disabled after running from RAM!
-	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
-#define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
-
-	.globl	reconfig_tlb0
-reconfig_tlb0:
-	sync
-	isync
-	addi	r4,r0,0x0000		/* TLB entry #0 */
-	lis	r5,TLB00@h
-	ori	r5,r5,TLB00@l
-	tlbwe	r5,r4,0x0000		/* Save it out */
-	lis	r5,TLB01@h
-	ori	r5,r5,TLB01@l
-	tlbwe	r5,r4,0x0001		/* Save it out */
-	lis	r5,TLB02@h
-	ori	r5,r5,TLB02@l
-	tlbwe	r5,r4,0x0002		/* Save it out */
-	sync
-	isync
-	blr
-#endif
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
deleted file mode 100644
index 77f1438448..0000000000
--- a/board/amcc/sequoia/sdram.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debug output */
-#undef DEBUG
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc440.h>
-
-#include "sdram.h"
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-	defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
-{
-	unsigned long val;
-	int wait = 0;
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_17);
-	val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
-			/* dlllockreg bit on */
-			return 0;
-		else
-			wait++;
-	}
-	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
-	debug("Waiting for dlllockreg bit to raise\n");
-
-	return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
-	unsigned long val;
-	int wait = 0;
-
-	/* --------------------------------------------------------------+
-	 * Wait for 'DRAM initialization complete' bit in status register
-	 * -------------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_00);
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
-			/* 'DRAM initialization complete' bit */
-			return 0;
-		else
-			wait++;
-	}
-
-	debug("DRAM initialization complete bit in status register did not rise\n");
-
-	return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
-	int k, j;
-	u32 val;
-	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
-	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
-	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
-	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
-	volatile u32 *ram_pointer;
-	u32 test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
-	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
-		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
-		/* -----------------------------------------------------------+
-		 * De-assert 'start' parameter.
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_02);
-		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'wr_dqs_shift'
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_09);
-		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-		 * ----------------------------------------------------------*/
-		dqs_out_shift = wr_dqs_shift + 32;
-		mtdcr(ddrcfga, DDR0_22);
-		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-		mtdcr(ddrcfgd, val);
-
-		passing_cases = 0;
-
-		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
-			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
-			/* -----------------------------------------------------------+
-			 * Set 'dll_dqs_delay_X'.
-			 * ----------------------------------------------------------*/
-			/* dll_dqs_delay_0 */
-			mtdcr(ddrcfga, DDR0_17);
-			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-			mtdcr(ddrcfga, DDR0_18);
-			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-			mtdcr(ddrcfga, DDR0_19);
-			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Wait for the DCC master delay line to finish calibration
-			 * ----------------------------------------------------------*/
-			if (wait_for_dlllock() != 0) {
-				printf("dlllock did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			ppcMsync();
-			ppcMbar();
-
-			if (wait_for_dram_init_complete() != 0) {
-				printf("dram init complete did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			udelay(100);  /* wait 100us to ensure init is really completed !!! */
-
-			/* write values */
-			for (j=0; j<NUM_TRIES; j++) {
-				ram_pointer[j] = test[j];
-
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-			}
-
-			/* read values back */
-			for (j=0; j<NUM_TRIES; j++) {
-				for (k=0; k<NUM_READS; k++) {
-					/* clear any cache at ram location */
-					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-					if (ram_pointer[j] != test[j])
-						break;
-				}
-
-				/* read error */
-				if (k != NUM_READS)
-					break;
-			}
-
-			/* See if the dll_dqs_delay_X value passed.*/
-			if (j < NUM_TRIES) {
-				/* Failed */
-				passing_cases = 0;
-				/* break; */
-			} else {
-				/* Passed */
-				if (passing_cases == 0)
-					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
-				passing_cases++;
-				if (passing_cases >= max_passing_cases) {
-					max_passing_cases = passing_cases;
-					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
-					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
-					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
-				}
-			}
-
-			/* -----------------------------------------------------------+
-			 * De-assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-			mtdcr(ddrcfgd, val);
-
-		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
-	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
-	/* -----------------------------------------------------------+
-	 * Largest passing window is now detected.
-	 * ----------------------------------------------------------*/
-
-	/* Compute dll_dqs_delay_X value */
-	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
-	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
-	debug("DQS calibration - Window detected:\n");
-	debug("max_passing_cases = %d\n", max_passing_cases);
-	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
-	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
-	debug("dll_dqs_delay_X window = %d - %d\n",
-	       dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
-	/* -----------------------------------------------------------+
-	 * De-assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-	mtdcr(ddrcfgd, val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'wr_dqs_shift'
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_09);
-	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_09=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-	 * ----------------------------------------------------------*/
-	dqs_out_shift = wr_dqs_shift + 32;
-	mtdcr(ddrcfga, DDR0_22);
-	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_22=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dll_dqs_delay_X'.
-	 * ----------------------------------------------------------*/
-	/* dll_dqs_delay_0 */
-	mtdcr(ddrcfga, DDR0_17);
-	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_17=0x%08lx\n", val);
-
-	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-	mtdcr(ddrcfga, DDR0_18);
-	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_18=0x%08lx\n", val);
-
-	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-	mtdcr(ddrcfga, DDR0_19);
-	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_19=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-	mtdcr(ddrcfgd, val);
-
-	ppcMsync();
-	ppcMbar();
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	if (wait_for_dlllock() != 0) {
-		printf("dlllock did not occur !!!\n");
-		hang();
-	}
-	ppcMsync();
-	ppcMbar();
-
-	if (wait_for_dram_init_complete() != 0) {
-		printf("dram init complete did not occur !!!\n");
-		hang();
-	}
-	udelay(100);  /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
-
-/*************************************************************************
- *
- * initdram -- 440EPx's DDR controller is a DENALI Core
- *
- ************************************************************************/
-long int initdram (int board_type)
-{
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtsdram(DDR0_02, 0x00000000);
-
-	mtsdram(DDR0_00, 0x0000190A);
-	mtsdram(DDR0_01, 0x01000000);
-	mtsdram(DDR0_03, 0x02030602);
-	mtsdram(DDR0_04, 0x13030300);
-	mtsdram(DDR0_05, 0x0202050E);
-	mtsdram(DDR0_06, 0x0104C823);
-	mtsdram(DDR0_07, 0x000D0100);
-	mtsdram(DDR0_08, 0x02360001);
-	mtsdram(DDR0_09, 0x00011D5F);
-	mtsdram(DDR0_10, 0x00000300);
-	mtsdram(DDR0_11, 0x0027C800);
-	mtsdram(DDR0_12, 0x00000003);
-	mtsdram(DDR0_14, 0x00000000);
-	mtsdram(DDR0_17, 0x19000000);
-	mtsdram(DDR0_18, 0x19191919);
-	mtsdram(DDR0_19, 0x19191919);
-	mtsdram(DDR0_20, 0x0B0B0B0B);
-	mtsdram(DDR0_21, 0x0B0B0B0B);
-	mtsdram(DDR0_22, 0x00267F0B);
-	mtsdram(DDR0_23, 0x00000000);
-	mtsdram(DDR0_24, 0x01010002);
-	mtsdram(DDR0_26, 0x5B260181);
-	mtsdram(DDR0_27, 0x0000682B);
-	mtsdram(DDR0_28, 0x00000000);
-	mtsdram(DDR0_31, 0x00000000);
-	mtsdram(DDR0_42, 0x01000006);
-	mtsdram(DDR0_43, 0x050A0200);
-	mtsdram(DDR0_44, 0x00000005);
-	mtsdram(DDR0_02, 0x00000001);
-
-	wait_for_dlllock();
-#endif /* #ifndef CONFIG_NAND_U_BOOT */
-
-#ifdef CONFIG_DDR_DATA_EYE
-	/* -----------------------------------------------------------+
-	 * Perform data eye search if requested.
-	 * ----------------------------------------------------------*/
-	denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
-#endif
-
-	return (CFG_MBYTES_SDRAM << 20);
-}
diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h
deleted file mode 100644
index 48966cfd6f..0000000000
--- a/board/amcc/sequoia/sdram.h
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync	sync
-#define ppcMbar		eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
-#define SDRAM_NONE          0           /* No DIMM detected in Slot */
-#define MAXRANKS            2           /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ     133333333
-#define PLB_FREQ_152MHZ     152000000
-#define PLB_FREQ_160MHZ     160000000
-#define PLB_FREQ_166MHZ     166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
-#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
-
-/*-----------------------------------------------------------------------------+
-  | Values for ddrcfga register - indirect addressing of these regs
-  +-----------------------------------------------------------------------------*/
-
-#define DDR0_00                         0x00
-#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL               0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0           0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1           0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2           0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3           0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4           0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5           0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6           0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7           0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-
-
-#define DDR0_01                         0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK             0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
-
-#define DDR0_02                         0x02
-#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK                0x00000001
-#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF                 0x00000000
-#define DDR0_02_START_ON                  0x00000001
-
-#define DDR0_03                         0x03
-#define DDR0_03_BSTLEN_MASK               0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK               0x00070000
-#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK             0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04                         0x04
-#define DDR0_04_TRC_MASK                  0x1F000000
-#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK                 0x00070000
-#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK                 0x00000700
-#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05                         0x05
-#define DDR0_05_TMRD_MASK                 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK                0x00070000
-#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK                  0x00000F00
-#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK             0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06                         0x06
-#define DDR0_06_WRITEINTERP_MASK          0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK                 0x00070000
-#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK                 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK                 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07                         0x07
-#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK                 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK             0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08                         0x08
-#define DDR0_08_WRLAT_MASK                0x07000000
-#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK                 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK             0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
-#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09                         0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK                0x00030000
-#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10                         0x0A
-#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK               0x00000300
-#define DDR0_10_CS_MAP_NO_MEM             0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11                         0x0B
-#define DDR0_11_SREFRESH_MASK             0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK                0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK                 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12                         0x0C
-#define DDR0_12_TCKE_MASK                 0x0000007
-#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13                         0x0D
-
-#define DDR0_14                         0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK                0x00010000
-#define DDR0_14_REDUC_64BITS              0x00000000
-#define DDR0_14_REDUC_32BITS              0x00010000
-#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15                         0x0F
-
-#define DDR0_16                         0x10
-
-#define DDR0_17                         0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18                         0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19                         0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20                         0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21                         0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22                         0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK             0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
-
-
-
-
-#define DDR0_23                         0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24                         0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25                         0x19
-#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26                         0x1A
-#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_27                         0x1B
-#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK                0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28                         0x1C
-#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29                         0x1D
-
-#define DDR0_30                         0x1E
-
-#define DDR0_31                         0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32                         0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33                         0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34                         0x22
-#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35                         0x23
-#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36                         0x24
-#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37                         0x25
-#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38                         0x26
-#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39                         0x27
-#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40                         0x28
-#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41                         0x29
-#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42                         0x2A
-#define DDR0_42_ADDR_PINS_MASK            0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43                         0x2B
-#define DDR0_43_TWR_MASK                  0x07000000
-#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK              0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44                         0x2C
-#define DDR0_44_TRCD_MASK                 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
deleted file mode 100644
index 03be5c8580..0000000000
--- a/board/amcc/sequoia/sequoia.c
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <ppc440.h>
-#include "sequoia.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-ulong flash_get_size (ulong base, int banknum);
-
-int board_early_init_f(void)
-{
-	u32 sdr0_cust0;
-	u32 sdr0_pfc1, sdr0_pfc2;
-	u32 reg;
-
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/* test-only: take GPIO init from pcs440ep ???? in config file */
-	out32(GPIO0_OR, 0x00000000);
-	out32(GPIO0_TCR, 0x0000000f);
-	out32(GPIO0_OSRL, 0x50015400);
-	out32(GPIO0_OSRH, 0x550050aa);
-	out32(GPIO0_TSRL, 0x50015400);
-	out32(GPIO0_TSRH, 0x55005000);
-	out32(GPIO0_ISR1L, 0x50000000);
-	out32(GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000100);
-	out32(GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
-
-	out32(GPIO1_OR, 0x00000000);
-	out32(GPIO1_TCR, 0xc2000000);
-	out32(GPIO1_OSRL, 0x5c280000);
-	out32(GPIO1_OSRH, 0x00000000);
-	out32(GPIO1_TSRL, 0x0c000000);
-	out32(GPIO1_TSRH, 0x00000000);
-	out32(GPIO1_ISR1L, 0x00005550);
-	out32(GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x00050000);
-	out32(GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffff7ff);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x00000000);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffffff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00000000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic2sr, 0xffffffff);	/* clear all */
-	mtdcr(uic2er, 0x00000000);	/* disable all */
-	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic2pr, 0xffffffff);	/* per ref-board manual */
-	mtdcr(uic2tr, 0x00000000);	/* per ref-board manual */
-	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(uic2sr, 0xffffffff);	/* clear all */
-
-	/* 50MHz tmrclk */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
-
-	/* clear write protects */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
-
-	/* enable Ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
-
-	/* enable USB device */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
-
-	/* select Ethernet pins */
-	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
-	mfsdr(SDR0_PFC2, sdr0_pfc2);
-	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
-	mtsdr(SDR0_PFC2, sdr0_pfc2);
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
-
-	/* setup NAND FLASH */
-	mfsdr(SDR0_CUST0, sdr0_cust0);
-	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
-		SDR0_CUST0_NDFC_ENABLE		|
-		SDR0_CUST0_NDFC_BW_8_BIT	|
-		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND_CS));
-	mtsdr(SDR0_CUST0, sdr0_cust0);
-
-	return 0;
-}
-
-/*---------------------------------------------------------------------------+
-  | misc_init_r.
-  +---------------------------------------------------------------------------*/
-int misc_init_r(void)
-{
-	uint pbcr;
-	int size_val = 0;
-	u32 reg;
-#ifdef CONFIG_440EPX
-	unsigned long usb2d0cr = 0;
-	unsigned long usb2phy0cr, usb2h0cr = 0;
-	unsigned long sdr0_pfc1;
-	char *act = getenv("usbact");
-#endif
-
-	/*
-	 * FLASH stuff...
-	 */
-
-	/* Re-do sizing to get full correct info */
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb3cr);
-#else
-	mtdcr(ebccfga, pb0cr);
-#endif
-	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb3cr);
-#else
-	mtdcr(ebccfga, pb0cr);
-#endif
-	mtdcr(ebccfgd, pbcr);
-
-	/*
-	 * Re-check to get correct base address
-	 */
-	flash_get_size(gd->bd->bi_flashstart, 0);
-
-#ifdef CFG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
-			    &flash_info[0]);
-#endif
-
-	/*
-	 * USB suff...
-	 */
-#ifdef CONFIG_440EPX
-	if (act == NULL || strcmp(act, "hostdev") == 0)	{
-		/* SDR Setting */
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-		mfsdr(SDR0_USB0, usb2d0cr);
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
-
-		/* An 8-bit/60MHz interface is the only possible alternative
-		   when connecting the Device to the PHY */
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
-
-		/* To enable the USB 2.0 Device function through the UTMI interface */
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;		/*1*/
-
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;		/*0*/
-
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-		mtsdr(SDR0_USB0, usb2d0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		/*clear resets*/
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		printf("USB:   Host(int phy) Device(ext phy)\n");
-
-	} else if (strcmp(act, "dev") == 0) {
-		/*-------------------PATCH-------------------------------*/
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x672c6000);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000080);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60206000);
-
-		*(unsigned int *)(0xe0000350) = 0x00000001;
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60306000);
-		/*-------------------PATCH-------------------------------*/
-
-		/* SDR Setting */
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-		mfsdr(SDR0_USB0, usb2d0cr);
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
-
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
-
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;		/*0*/
-
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
-
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB0, usb2d0cr);
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-		/*clear resets*/
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		printf("USB:   Device(int phy)\n");
-	}
-#endif /* CONFIG_440EPX */
-
-	/*
-	 * Clear PLB4A0_ACR[WRP]
-	 * This fix will make the MAL burst disabling patch for the Linux
-	 * EMAC driver obsolete.
-	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-#ifdef CONFIG_440EPX
-	printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
-#else
-	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
-#endif
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
-{
-	unsigned long *mem = (unsigned long *)0;
-	const unsigned long kend = (1024 / sizeof(unsigned long));
-	unsigned long k, n;
-
-	mtmsr(0);
-
-	for (k = 0; k < CFG_MBYTES_SDRAM;
-	     ++k, mem += (1024 / sizeof(unsigned long))) {
-		if ((k & 1023) == 0) {
-			printf("%3d MB\r", k / 1024);
-		}
-
-		memset(mem, 0xaaaaaaaa, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0xaaaaaaaa) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-
-		memset(mem, 0x55555555, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0x55555555) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-	}
-	printf("SDRAM test passes\n");
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long addr;
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
-
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
-
-	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440EPX PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
-
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	unsigned short temp_short;
-
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	/* Cactus is always configured as host. */
-	return (1);
-}
-#endif				/* defined(CONFIG_PCI) */
diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h
deleted file mode 100644
index 1d44b16464..0000000000
--- a/board/amcc/sequoia/sequoia.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*----------------------------------------------------------------------------+
-  | EBC Configuration Register - EBC0_CFG
-  +----------------------------------------------------------------------------*/
-/* External Bus Three-State Control */
-#define EBC0_CFG_EBTC_DRIVEN	    0x80000000
-/* Device-Paced Time-out Disable */
-#define EBC0_CFG_PTD_ENABLED	    0x00000000
-/* Ready Timeout Count */
-#define EBC0_CFG_RTC_MASK	    0x38000000
-#define EBC0_CFG_RTC_16PERCLK	    0x00000000
-#define EBC0_CFG_RTC_32PERCLK	    0x08000000
-#define EBC0_CFG_RTC_64PERCLK	    0x10000000
-#define EBC0_CFG_RTC_128PERCLK	    0x18000000
-#define EBC0_CFG_RTC_256PERCLK	    0x20000000
-#define EBC0_CFG_RTC_512PERCLK	    0x28000000
-#define EBC0_CFG_RTC_1024PERCLK	    0x30000000
-#define EBC0_CFG_RTC_2048PERCLK	    0x38000000
-/* External Master Priority Low */
-#define EBC0_CFG_EMPL_LOW	    0x00000000
-#define EBC0_CFG_EMPL_MEDIUM_LOW    0x02000000
-#define EBC0_CFG_EMPL_MEDIUM_HIGH   0x04000000
-#define EBC0_CFG_EMPL_HIGH	    0x06000000
-/* External Master Priority High */
-#define EBC0_CFG_EMPH_LOW	    0x00000000
-#define EBC0_CFG_EMPH_MEDIUM_LOW    0x00800000
-#define EBC0_CFG_EMPH_MEDIUM_HIGH   0x01000000
-#define EBC0_CFG_EMPH_HIGH	    0x01800000
-/* Chip Select Three-State Control */
-#define EBC0_CFG_CSTC_DRIVEN	    0x00400000
-/* Burst Prefetch */
-#define EBC0_CFG_BPF_ONEDW	    0x00000000
-#define EBC0_CFG_BPF_TWODW	    0x00100000
-#define EBC0_CFG_BPF_FOURDW	    0x00200000
-/* External Master Size */
-#define EBC0_CFG_EMS_8BIT	    0x00000000
-/* Power Management Enable */
-#define EBC0_CFG_PME_DISABLED	    0x00000000
-#define EBC0_CFG_PME_ENABLED	    0x00020000
-/* Power Management Timer */
-#define EBC0_CFG_PMT_ENCODE(n)		((((unsigned long)(n))&0x1F)<<12)
-
-#define SDR0_USB0                    0x0320     /* USB Control Register */
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
deleted file mode 100644
index cf2e2b5581..0000000000
--- a/board/amcc/sequoia/u-boot-nand.lds
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-
-    /* Align to next NAND block */
-    . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
-    /* Keep some space here for redundant env and potential bad env blocks */
-    . = ALIGN(0x10000);
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
deleted file mode 100644
index a423f98285..0000000000
--- a/board/amcc/sequoia/u-boot.lds
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile
deleted file mode 100644
index 261e5d49cc..0000000000
--- a/board/amcc/yellowstone/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/amcc/yellowstone/config.mk b/board/amcc/yellowstone/config.mk
deleted file mode 100644
index 4ab0ea0084..0000000000
--- a/board/amcc/yellowstone/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0x00001000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
-else
-TEXT_BASE = 0xFFF80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S
deleted file mode 100644
index 425ad0868f..0000000000
--- a/board/amcc/yellowstone/init.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-     * speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
-
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
-
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
-
-    /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
-
-    /* USB 2.0 Device */
-    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
-
-    tlbtab_end
diff --git a/board/amcc/yellowstone/u-boot.lds b/board/amcc/yellowstone/u-boot.lds
deleted file mode 100644
index a0ba44de88..0000000000
--- a/board/amcc/yellowstone/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/amcc/yellowstone/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
deleted file mode 100644
index bb3d81e25c..0000000000
--- a/board/amcc/yellowstone/yellowstone.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
-
-	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
-	mtebc(pb0cr, 0xfc0da000);	/* BAS=0xfc0 64MB r/w 16-bit */
-
-	mtebc(pb1ap, 0x00000000);
-	mtebc(pb1cr, 0x00000000);
-
-	mtebc(pb2ap, 0x04814500);
-	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
-
-	mtebc(pb3ap, 0x00000000);
-	mtebc(pb3cr, 0x00000000);
-
-	mtebc(pb4ap, 0x00000000);
-	mtebc(pb4cr, 0x00000000);
-
-	mtebc(pb5ap, 0x00000000);
-	mtebc(pb5cr, 0x00000000);
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/*CPLD cs */
-	/*setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
-
-	/*setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/*UART1 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup other serial configuration
-	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	/*clear tmrclk divisor */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
-
-	/*enable ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
-
-
-	/*get rid of flash write protect */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	uint pbcr;
-	int size_val = 0;
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*************************************************************************
- *  sdram_init -- doesn't use serial presence detect.
- *
- *  Assumes:    256 MB, ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void sdram_tr1_set(int ram_address, int* tr1_value)
-{
-	int i;
-	int j, k;
-	volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
-	int first_good = -1, last_bad = 0x1ff;
-
-	unsigned long test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	/* go through all possible SDRAM0_TR1[RDCT] values */
-	for (i=0; i<=0x1ff; i++) {
-		/* set the current value for TR1 */
-		mtsdram(mem_tr1, (0x80800800 | i));
-
-		/* write values */
-		for (j=0; j<NUM_TRIES; j++) {
-			ram_pointer[j] = test[j];
-
-			/* clear any cache at ram location */
-			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-		}
-
-		/* read values back */
-		for (j=0; j<NUM_TRIES; j++) {
-			for (k=0; k<NUM_READS; k++) {
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-				if (ram_pointer[j] != test[j])
-					break;
-			}
-
-			/* read error */
-			if (k != NUM_READS) {
-				break;
-			}
-		}
-
-		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
-		if (j == NUM_TRIES) {
-			if (first_good == -1)
-				first_good = i;		/* found beginning of window */
-		} else { /* bad read */
-			/* if we have not had a good read then don't care */
-			if(first_good != -1) {
-				/* first failure after a good read */
-				last_bad = i-1;
-				break;
-			}
-		}
-	}
-
-	/* return the current value for TR1 */
-	*tr1_value = (first_good + last_bad) / 2;
-}
-
-void sdram_init(void)
-{
-	register uint reg;
-	int tr1_bank1, tr1_bank2;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(mem_clktr, 0x40000000);	/* ?? */
-	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
-
-	/*clear this first, if the DDR is enabled by a debugger
-	  then you can not make changes. */
-	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
-
-	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
-	mtsdram(mem_rtr, 0x04080000);	/* ?? */
-	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
-
-	for (;;) {
-		mfsdram(mem_mcsts, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	sdram_tr1_set(0x00000000, &tr1_bank1);
-	sdram_tr1_set(0x08000000, &tr1_bank2);
-	mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
-}
-
-/*************************************************************************
- *  long int initdram
- *
- ************************************************************************/
-long int initdram(int board)
-{
-	sdram_init();
-	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
-{
-	unsigned long *mem = (unsigned long *)0;
-	const unsigned long kend = (1024 / sizeof(unsigned long));
-	unsigned long k, n;
-
-	mtmsr(0);
-
-	for (k = 0; k < CFG_KBYTES_SDRAM;
-	     ++k, mem += (1024 / sizeof(unsigned long))) {
-		if ((k & 1023) == 0) {
-			printf("%3d MB\r", k / 1024);
-		}
-
-		memset(mem, 0xaaaaaaaa, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0xaaaaaaaa) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-
-		memset(mem, 0x55555555, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0x55555555) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-	}
-	printf("SDRAM test passes\n");
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long addr;
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
-
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
-
-	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440 EP PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
-
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	unsigned short temp_short;
-
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	/* Bamboo is always configured as host. */
-	return (1);
-}
-#endif				/* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-
-}
-#endif
-
-void board_reset(void)
-{
-	/* give reset to BCSR */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
-}
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
deleted file mode 100644
index 261e5d49cc..0000000000
--- a/board/amcc/yosemite/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk
deleted file mode 100644
index 4ab0ea0084..0000000000
--- a/board/amcc/yosemite/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0x00001000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
-else
-TEXT_BASE = 0xFFF80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
deleted file mode 100644
index 425ad0868f..0000000000
--- a/board/amcc/yosemite/init.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-     * speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
-
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
-
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
-
-    /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
-
-    /* USB 2.0 Device */
-    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
-
-    tlbtab_end
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
deleted file mode 100644
index a9a7b0af6a..0000000000
--- a/board/amcc/yosemite/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/amcc/yosemite/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
deleted file mode 100644
index 588ee900da..0000000000
--- a/board/amcc/yosemite/yosemite.c
+++ /dev/null
@@ -1,556 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
-
-	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
-	mtebc(pb0cr, 0xfc0da000);	/* BAS=0xfc0 64MB r/w 16-bit */
-
-	mtebc(pb1ap, 0x00000000);
-	mtebc(pb1cr, 0x00000000);
-
-	mtebc(pb2ap, 0x04814500);
-	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
-
-	mtebc(pb3ap, 0x00000000);
-	mtebc(pb3cr, 0x00000000);
-
-	mtebc(pb4ap, 0x00000000);
-	mtebc(pb4cr, 0x00000000);
-
-	mtebc(pb5ap, 0x00000000);
-	mtebc(pb5cr, 0x00000000);
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/*CPLD cs */
-	/*setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
-
-	/*setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/*UART1 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-	/*setup USB 2.0 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
-	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup other serial configuration
-	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	/*clear tmrclk divisor */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
-
-	/*enable ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
-
-	/*enable usb 1.1 fs device and remove usb 2.0 reset */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
-
-	/*get rid of flash write protect */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	uint pbcr;
-	int size_val = 0;
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*************************************************************************
- *  sdram_init -- doesn't use serial presence detect.
- *
- *  Assumes:    256 MB, ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void sdram_tr1_set(int ram_address, int* tr1_value)
-{
-	int i;
-	int j, k;
-	volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
-	int first_good = -1, last_bad = 0x1ff;
-
-	unsigned long test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	/* go through all possible SDRAM0_TR1[RDCT] values */
-	for (i=0; i<=0x1ff; i++) {
-		/* set the current value for TR1 */
-		mtsdram(mem_tr1, (0x80800800 | i));
-
-		/* write values */
-		for (j=0; j<NUM_TRIES; j++) {
-			ram_pointer[j] = test[j];
-
-			/* clear any cache at ram location */
-			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-		}
-
-		/* read values back */
-		for (j=0; j<NUM_TRIES; j++) {
-			for (k=0; k<NUM_READS; k++) {
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-				if (ram_pointer[j] != test[j])
-					break;
-			}
-
-			/* read error */
-			if (k != NUM_READS) {
-				break;
-			}
-		}
-
-		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
-		if (j == NUM_TRIES) {
-			if (first_good == -1)
-				first_good = i;		/* found beginning of window */
-		} else { /* bad read */
-			/* if we have not had a good read then don't care */
-			if(first_good != -1) {
-				/* first failure after a good read */
-				last_bad = i-1;
-				break;
-			}
-		}
-	}
-
-	/* return the current value for TR1 */
-	*tr1_value = (first_good + last_bad) / 2;
-}
-
-void sdram_init(void)
-{
-	register uint reg;
-	int tr1_bank1, tr1_bank2;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(mem_clktr, 0x40000000);	/* ?? */
-	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
-
-	/*clear this first, if the DDR is enabled by a debugger
-	  then you can not make changes. */
-	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
-
-	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
-	mtsdram(mem_rtr, 0x04080000);	/* ?? */
-	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
-
-	for (;;) {
-		mfsdram(mem_mcsts, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	sdram_tr1_set(0x00000000, &tr1_bank1);
-	sdram_tr1_set(0x08000000, &tr1_bank2);
-	mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
-}
-
-/*************************************************************************
- *  long int initdram
- *
- ************************************************************************/
-long int initdram(int board)
-{
-	sdram_init();
-	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
-{
-	unsigned long *mem = (unsigned long *)0;
-	const unsigned long kend = (1024 / sizeof(unsigned long));
-	unsigned long k, n;
-
-	mtmsr(0);
-
-	for (k = 0; k < CFG_KBYTES_SDRAM;
-	     ++k, mem += (1024 / sizeof(unsigned long))) {
-		if ((k & 1023) == 0) {
-			printf("%3d MB\r", k / 1024);
-		}
-
-		memset(mem, 0xaaaaaaaa, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0xaaaaaaaa) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-
-		memset(mem, 0x55555555, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0x55555555) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-	}
-	printf("SDRAM test passes\n");
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long addr;
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
-
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
-
-	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440 EP PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
-
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	unsigned short temp_short;
-
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	/* Bamboo is always configured as host. */
-	return (1);
-}
-#endif				/* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-
-}
-#endif
-
-void board_reset(void)
-{
-	/* give reset to BCSR */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
-}
diff --git a/board/assabet/Makefile b/board/assabet/Makefile
deleted file mode 100644
index 872c7fbff8..0000000000
--- a/board/assabet/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# 2004 (c) MontaVista Software, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= assabet.o
-SOBJS	:= setup.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
deleted file mode 100644
index 4f84a58117..0000000000
--- a/board/assabet/assabet.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Board dependent initialisation
- */
-
-#define ECOR			0x8000
-#define ECOR_RESET		0x80
-#define ECOR_LEVEL_IRQ		0x40
-#define ECOR_WR_ATTRIB		0x04
-#define ECOR_ENABLE		0x01
-
-#define ECSR			0x8002
-#define ECSR_IOIS8		0x20
-#define ECSR_PWRDWN		0x04
-#define ECSR_INT		0x02
-#define SMC_IO_SHIFT		2
-#define NCR_0           	(*((volatile u_char *)(0x100000a0)))
-#define NCR_ENET_OSC_EN		(1<<3)
-
-static inline u8
-readb(volatile u8 * p)
-{
-	return *p;
-}
-
-static inline void
-writeb(u8 v, volatile u8 * p)
-{
-	*p = v;
-}
-
-static void
-smc_init(void)
-{
-	u8 ecor;
-	u8 ecsr;
-	volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25));
-
-	NCR_0 |= NCR_ENET_OSC_EN;
-	udelay(100);
-
-	ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
-	writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
-	udelay(100);
-
-	/*
-	 * The device will ignore all writes to the enable bit while
-	 * reset is asserted, even if the reset bit is cleared in the
-	 * same write.  Must clear reset first, then enable the device.
-	 */
-	writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
-	writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
-
-	/*
-	 * Set the appropriate byte/word mode.
-	 */
-	ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
-	ecsr |= ECSR_IOIS8;
-	writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
-	udelay(100);
-}
-
-static void
-neponset_init(void)
-{
-	smc_init();
-}
-
-int
-board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
-	gd->bd->bi_boot_params = 0xc0000100;
-
-	neponset_init();
-
-	return 0;
-}
-
-int
-dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/board/assabet/config.mk b/board/assabet/config.mk
deleted file mode 100644
index 74cb41941d..0000000000
--- a/board/assabet/config.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# SA-1110 based Intel Assabet board
-#
-# The Intel Assabet 1 bank of 32 MiB SDRAM
-#
-
-TEXT_BASE = 0xc1f00000
diff --git a/board/assabet/setup.S b/board/assabet/setup.S
deleted file mode 100644
index 56ea0dd928..0000000000
--- a/board/assabet/setup.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/*-----------------------------------------------------------------------
- * Board defines:
- */
-
-#define MDCNFG		0x00
-#define MDCAS00		0x04
-#define MDCAS01		0x08
-#define MDCAS02		0x0C
-#define MSC0		0x10
-#define MSC1		0x14
-#define MECR		0x18
-#define MDREFR		0x1C
-#define MDCAS20		0x20
-#define MDCAS21		0x24
-#define MDCAS22		0x28
-#define MSC2		0x2C
-#define SMCNFG		0x30
-
-#define ASSABET_BCR		(0x12000000)
-#define ASSABET_BCR_DB1110	(0x00a07490 | (0<<16) | (0<<17))
-#define ASSABET_SCR_nNEPONSET	(1 << 9)
-#define NEPONSET_LEDS		(0x10000010)
-
-
-/*-----------------------------------------------------------------------
- * Setup parameters for the board:
- */
-
-
-MEM_BASE:	.long	0xa0000000
-MEM_START:	.long	0xc0000000
-
-mdcnfg:		.long	0x72547254
-mdcas00:	.long	0xaaaaaa7f
-mdcas01:	.long	0xaaaaaaaa
-mdcas02:	.long	0xaaaaaaaa
-msc0:		.long	0x4b384370
-msc1:		.long	0x22212419
-mecr:		.long	0x994a994a
-mdrefr:		.long	0x04340327
-mdcas20:	.long	0xaaaaaa7f
-mdcas21:	.long	0xaaaaaaaa
-mdcas22:	.long	0xaaaaaaaa
-msc2:		.long	0x42196669
-smcnfg:		.long	0x00000000
-
-BCR:		.long	ASSABET_BCR
-BCR_DB1110:	.long	ASSABET_BCR_DB1110
-LEDS:		.long	NEPONSET_LEDS
-
-
-	.globl lowlevel_init
-lowlevel_init:
-
-	/* Setting up the memory and stuff */
-
-	ldr	r0, MEM_BASE
-	ldr	r1, mdcas00
-	str	r1, [r0, #MDCAS00]
-	ldr	r1, mdcas01
-	str	r1, [r0, #MDCAS01]
-	ldr	r1, mdcas02
-	str	r1, [r0, #MDCAS02]
-	ldr	r1, mdcas20
-	str	r1, [r0, #MDCAS20]
-	ldr	r1, mdcas21
-	str	r1, [r0, #MDCAS21]
-	ldr	r1, mdcas22
-	str	r1, [r0, #MDCAS22]
-	ldr	r1, mdrefr
-	str	r1, [r0, #MDREFR]
-	ldr	r1, mecr
-	str	r1, [r0, #MECR]
-	ldr	r1, msc0
-	str	r1, [r0, #MSC0]
-	ldr	r1, msc1
-	str	r1, [r0, #MSC1]
-	ldr	r1, msc2
-	str	r1, [r0, #MSC2]
-	ldr	r1, smcnfg
-	str	r1, [r0, #SMCNFG]
-
-	ldr	r1, mdcnfg
-	str	r1, [r0, #MDCNFG]
-
-	/* Load something to activate bank */
-	ldr	r2, MEM_START
-.rept	8
-	ldr	r3, [r2]
-.endr
-
-	/* Enable SDRAM */
-	orr	r1, r1, #0x00000001
-	str	r1, [r0, #MDCNFG]
-
-	ldr	r1, BCR
-	ldr	r2, BCR_DB1110
-	str	r2, [r1]
-
-	ldr	r1, LEDS
-	mov	r0, #0x3
-	str	r0, [r1]
-
-	/* All done... */
-	mov	pc, lr
diff --git a/board/assabet/u-boot.lds b/board/assabet/u-boot.lds
deleted file mode 100644
index 7a3a9b8fc8..0000000000
--- a/board/assabet/u-boot.lds
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-		cpu/sa1100/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile
deleted file mode 100644
index d0e147e4ba..0000000000
--- a/board/bc3450/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o cmd_bc3450.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
deleted file mode 100644
index 05bb7235f8..0000000000
--- a/board/bc3450/bc3450.c
+++ /dev/null
@@ -1,671 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * (C) Copyright 2006
- * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#ifdef CONFIG_VIDEO_SM501
-#include <sm501.h>
-#endif
-
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-#ifdef CONFIG_RTC_MPC5200
-#include <rtc.h>
-#endif
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init(void);
-#endif
-
-#ifndef CFG_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *	      is something else than 0x00000000.
- */
-
-#if defined(CONFIG_MPC5200)
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
-			__builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */
-
-	/* find RAM size using SDRAM CS1 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#elif defined(CONFIG_MGT5100)
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup and enable SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;	/* 2G		*/
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22);	/* Enable SDRAM */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-	__asm__ volatile ("sync");
-
-	/* find RAM size */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
-	/* Retrieve amount of SDRAM available */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
-int checkboard (void)
-{
-#if defined (CONFIG_TQM5200)
-	puts ("Board: TQM5200 (TQ-Components GmbH)\n");
-#endif
-
-#if defined (CONFIG_BC3450)
-	puts ("Dev:   GERSYS BC3450\n");
-#endif
-
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-#if defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25);	/* disable CS_BOOT */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 16);	/* enable CS0	   */
-#endif
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1;		/* clear RO	   */
-}
-
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
-	}
-}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
-
-#ifdef CONFIG_POST
-/*
- * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3
- * is left open, no keypress is detected.
- */
-int post_hotkeys_pressed(void)
-{
-	struct mpc5xxx_gpio *gpio;
-
-	gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO;
-
-	/*
-	 * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in
-	 * CODEC or UART mode. Consumer IrDA should still be possible.
-	 */
-	gpio->port_config &= ~(0x07000000);
-	gpio->port_config |=   0x03000000;
-
-	/* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */
-	gpio->simple_gpioe |= 0x20000000;
-
-	/* Configure GPIO_IRDA_1 as input */
-	gpio->simple_ddr &= ~(0x20000000);
-
-	return ((gpio->simple_ival & 0x20000000) ? 0 : 1);
-}
-#endif
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	return *save_addr;
-}
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_RTC_MPC5200
-	struct rtc_time t;
-
-	/* set to Wed Dec 31 19:00:00 1969 */
-	t.tm_sec = t.tm_min = 0;
-	t.tm_hour = 19;
-	t.tm_mday = 31;
-	t.tm_mon = 12;
-	t.tm_year = 1969;
-	t.tm_wday = 3;
-
-	rtc_set(&t);
-#endif /* CONFIG_RTC_MPC5200 */
-
-#ifdef CONFIG_PS2MULT
-	ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
-	return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
-
-
-int last_stage_init (void)
-{
-	/*
-	 * auto scan for really existing devices and re-set chip select
-	 * configuration.
-	 */
-	u16 save, tmp;
-	int restore;
-
-	/*
-	 * Check for SRAM and SRAM size
-	 */
-
-	/* save original SRAM content  */
-	save = *(volatile u16 *)CFG_CS2_START;
-	restore = 1;
-
-	/* write test pattern to SRAM */
-	*(volatile u16 *)CFG_CS2_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in SRAM detection\n");
-
-	if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) {
-		/* no SRAM at all, disable cs */
-		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
-		*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
-		*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
-		restore = 0;
-		__asm__ volatile ("sync");
-	} else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
-		/* make sure that we access a mirrored address */
-		*(volatile u16 *)CFG_CS2_START = 0x1111;
-		__asm__ volatile ("sync");
-		if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) {
-			/* SRAM size = 512 kByte */
-			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START,
-								0x80000);
-			__asm__ volatile ("sync");
-			puts ("SRAM:  512 kB\n");
-		}
-		else
-			puts ("!! possible error in SRAM detection\n");
-	} else {
-		puts ("SRAM:  1 MB\n");
-	}
-	/* restore origianl SRAM content  */
-	if (restore) {
-		*(volatile u16 *)CFG_CS2_START = save;
-		__asm__ volatile ("sync");
-	}
-
-	/*
-	 * Check for Grafic Controller
-	 */
-
-	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
-	restore = 1;
-
-	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in grafic controller detection\n");
-
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
-		/* no grafic controller at all, disable cs */
-		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
-		*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
-		*(vu_long *)MPC5XXX_CS1_STOP = 0x0000FFFF;
-		restore = 0;
-		__asm__ volatile ("sync");
-	} else {
-		puts ("VGA:   SMI501 (Voyager) with 8 MB\n");
-	}
-	/* restore origianl FB content	*/
-	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
-		__asm__ volatile ("sync");
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_SM501
-
-#define DISPLAY_WIDTH	640
-#define DISPLAY_HEIGHT	480
-
-#ifdef CONFIG_VIDEO_SM501_8BPP
-#error CONFIG_VIDEO_SM501_8BPP not supported.
-#endif /* CONFIG_VIDEO_SM501_8BPP */
-
-#ifdef CONFIG_VIDEO_SM501_16BPP
-#error CONFIG_VIDEO_SM501_16BPP not supported.
-#endif /* CONFIG_VIDEO_SM501_16BPP */
-
-#ifdef CONFIG_VIDEO_SM501_32BPP
-static const SMI_REGS init_regs [] =
-{
-#if defined (CONFIG_BC3450_FP) && !defined (CONFIG_BC3450_CRT)
-	/* FP only */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x091a0a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x091a0a01},
-	{0x00054, 0x0},
-	{0x80000, 0x01013106},
-	{0x80004, 0xc428bb17},
-	{0x80000, 0x03013106},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0a000a00},
-	{0x80014, 0x02800000},
-	{0x80018, 0x01e00000},
-	{0x8001C, 0x00000000},
-	{0x80020, 0x01e00280},
-	{0x80024, 0x02fa027f},
-	{0x80028, 0x004a028b},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00010200},
-	{0x80000, 0x0f013106},
-#elif defined (CONFIG_BC3450_CRT) && !defined (CONFIG_BC3450_FP)
-	/* CRT only */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x10090a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x10090a01},
-	{0x00054, 0x0},
-	{0x80200, 0x00010000},
-	{0x80204, 0x0},
-	{0x80208, 0x0A000A00},
-	{0x8020C, 0x02fa027f},
-	{0x80210, 0x004a028b},
-	{0x80214, 0x020c01df},
-	{0x80218, 0x000201e9},
-	{0x80200, 0x00013306},
-#else	/* panel + CRT */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x091a0a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x091a0a01},
-	{0x00054, 0x0},
-	{0x80000, 0x0f013106},
-	{0x80004, 0xc428bb17},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0a000a00},
-	{0x80014, 0x02800000},
-	{0x80018, 0x01e00000},
-	{0x8001C, 0x00000000},
-	{0x80020, 0x01e00280},
-	{0x80024, 0x02fa027f},
-	{0x80028, 0x004a028b},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00010000},
-#endif
-	{0, 0}
-};
-#endif /* CONFIG_VIDEO_SM501_32BPP */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str (int line_number, char *info)
-{
-	if (line_number == 1) {
-#if defined (CONFIG_TQM5200)
-	    strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif /* CONFIG_TQM5200 */
-
-#if defined (CONFIG_BC3450)
-	} else if (line_number == 2) {
-	    strcpy (info, " Dev:   GERSYS BC3450");
-#endif /* CONFIG_BC3450 */
-	}
-	else {
-		info [0] = '\0';
-	}
-}
-#endif
-
-/*
- * Returns SM501 register base address. First thing called in the
- * driver. Checks if SM501 is physically present.
- */
-unsigned int board_video_init (void)
-{
-	u16 save, tmp;
-	int restore, ret;
-
-	/*
-	 * Check for Grafic Controller
-	 */
-
-	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
-	restore = 1;
-
-	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in grafic controller detection\n");
-
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
-		/* no grafic controller found */
-		restore = 0;
-		ret = 0;
-	} else {
-	    ret = SM501_MMIO_BASE;
-	}
-
-	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
-		__asm__ volatile ("sync");
-	}
-	return ret;
-}
-
-/*
- * Returns SM501 framebuffer address
- */
-unsigned int board_video_get_fb (void)
-{
-	return SM501_FB_BASE;
-}
-
-/*
- * Called after initializing the SM501 and before clearing the screen.
- */
-void board_validate_screen (unsigned int base)
-{
-}
-
-/*
- * Return a pointer to the initialization sequence.
- */
-const SMI_REGS *board_get_regs (void)
-{
-	return init_regs;
-}
-
-int board_get_width (void)
-{
-	return DISPLAY_WIDTH;
-}
-
-int board_get_height (void)
-{
-	return DISPLAY_HEIGHT;
-}
-
-#endif /* CONFIG_VIDEO_SM501 */
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
deleted file mode 100644
index 6bbe4e6a5d..0000000000
--- a/board/bc3450/cmd_bc3450.c
+++ /dev/null
@@ -1,827 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-
-/*
- * BC3450 specific commands
- */
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-#undef DEBUG
-#ifdef DEBUG
-# define dprintf(fmt,args...)	printf(fmt, ##args)
-#else
-# define dprintf(fmt,args...)
-#endif
-
-/*
- * Definitions for DS1620 chip
- */
-#define THERM_START_CONVERT	0xee
-#define THERM_RESET		0xaf
-#define THERM_READ_CONFIG	0xac
-#define THERM_READ_TEMP		0xaa
-#define THERM_READ_TL		0xa2
-#define THERM_READ_TH		0xa1
-#define THERM_WRITE_CONFIG	0x0c
-#define THERM_WRITE_TL		0x02
-#define THERM_WRITE_TH		0x01
-
-#define CFG_CPU			2
-#define CFG_1SHOT		1
-#define CFG_STANDALONE		0
-
-struct therm {
-	int hi;
-	int lo;
-};
-
-/*
- * SM501 Register
- */
-#define SM501_GPIO_CTRL_LOW		0x00000008UL	/* gpio pins 0..31  */
-#define SM501_GPIO_CTRL_HIGH		0x0000000CUL	/* gpio pins 32..63 */
-#define SM501_POWER_MODE0_GATE		0x00000040UL
-#define SM501_POWER_MODE1_GATE		0x00000048UL
-#define POWER_MODE_GATE_GPIO_PWM_I2C	0x00000040UL
-#define SM501_GPIO_DATA_LOW 		0x00010000UL
-#define SM501_GPIO_DATA_HIGH		0x00010004UL
-#define SM501_GPIO_DATA_DIR_LOW		0x00010008UL
-#define SM501_GPIO_DATA_DIR_HIGH	0x0001000CUL
-#define SM501_PANEL_DISPLAY_CONTROL	0x00080000UL
-#define SM501_CRT_DISPLAY_CONTROL	0x00080200UL
-
-/* SM501 CRT Display Control Bits */
-#define SM501_CDC_SEL			(1 << 9)
-#define SM501_CDC_TE			(1 << 8)
-#define SM501_CDC_E			(1 << 2)
-
-/* SM501 Panel Display Control Bits */
-#define SM501_PDC_FPEN			(1 << 27)
-#define SM501_PDC_BIAS			(1 << 26)
-#define SM501_PDC_DATA			(1 << 25)
-#define SM501_PDC_VDDEN			(1 << 24)
-
-/* SM501 GPIO Data LOW Bits */
-#define SM501_GPIO24			0x01000000
-#define SM501_GPIO25			0x02000000
-#define SM501_GPIO26			0x04000000
-#define SM501_GPIO27			0x08000000
-#define SM501_GPIO28			0x10000000
-#define SM501_GPIO29			0x20000000
-#define SM501_GPIO30			0x40000000
-#define SM501_GPIO31			0x80000000
-
-/* SM501 GPIO Data HIGH Bits */
-#define SM501_GPIO46			0x00004000
-#define SM501_GPIO47			0x00008000
-#define SM501_GPIO48			0x00010000
-#define SM501_GPIO49			0x00020000
-#define SM501_GPIO50			0x00040000
-#define SM501_GPIO51			0x00080000
-
-/* BC3450 GPIOs @ SM501 Data LOW */
-#define DIP				(SM501_GPIO24 | SM501_GPIO25 | SM501_GPIO26 | SM501_GPIO27)
-#define DS1620_DQ			SM501_GPIO29	/* I/O             */
-#define DS1620_CLK			SM501_GPIO30	/* High active O/P */
-#define DS1620_RES			SM501_GPIO31	/* Low active O/P  */
-/* BC3450 GPIOs @ SM501 Data HIGH */
-#define BUZZER				SM501_GPIO47	/* Low active O/P  */
-#define DS1620_TLOW			SM501_GPIO48	/* High active I/P */
-#define PWR_OFF				SM501_GPIO49	/* Low active O/P  */
-#define FP_DATA_TRI			SM501_GPIO50	/* High active O/P */
-
-
-/*
- * Initialise GPIO on SM501
- *
- * This function may be called from several other functions.
- * Yet, the initialisation sequence is executed only the first
- * time the function is called.
- */
-int sm501_gpio_init (void)
-{
-	static int init_done = 0;
-
-	if (init_done) {
-/*	dprintf("sm501_gpio_init: nothing to be done.\n"); */
-		return 1;
-	}
-
-	/* enable SM501 GPIO control (in both power modes) */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE0_GATE) |=
-		POWER_MODE_GATE_GPIO_PWM_I2C;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE1_GATE) |=
-		POWER_MODE_GATE_GPIO_PWM_I2C;
-
-	/* set up default O/Ps */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-		~(DS1620_RES | DS1620_CLK);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-		~(FP_DATA_TRI);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
-		(BUZZER | PWR_OFF);
-
-	/* configure directions for SM501 GPIO pins */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_LOW) &= ~(0xFF << 24);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_HIGH) &=
-		~(0x3F << 14);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &=
-		~(DIP | DS1620_DQ);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |=
-		(DS1620_RES | DS1620_CLK);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) &=
-		~DS1620_TLOW;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) |=
-		(PWR_OFF | BUZZER | FP_DATA_TRI);
-
-	init_done = 1;
-/*  dprintf("sm501_gpio_init: done.\n"); */
-	return 0;
-}
-
-
-/*
- * dip - read Config Inputs
- *
- * read and prints the dip switch
- * and/or external config inputs (4bits) 0...0x0F
- */
-int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	vu_long rc = 0;
-
-	sm501_gpio_init ();
-
-	/* read dip switch */
-	rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-	rc = ~rc;
-	rc &= DIP;
-	rc = (int) (rc >> 24);
-
-	/* plausibility check */
-	if (rc > 0x0F)
-		return -1;
-
-	printf ("0x%x\n", rc);
-	return 0;
-}
-
-U_BOOT_CMD (dip, 1, 1, cmd_dip,
-	    "dip     - read dip switch and config inputs\n",
-	    "\n"
-	    "     - prints the state of the dip switch and/or\n"
-	    "       external configuration inputs as hex value.\n"
-	    "     - \"Config 1\" is the LSB\n");
-
-
-/*
- * buz - turns Buzzer on/off
- */
-#ifdef CONFIG_BC3450_BUZZER
-static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	if (argc != 2) {
-		printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-		return 1;
-	}
-
-	sm501_gpio_init ();
-
-	if (strncmp (argv[1], "on", 2) == 0) {
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-			~(BUZZER);
-		return 0;
-	} else if (strncmp (argv[1], "off", 3) == 0) {
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
-			BUZZER;
-		return 0;
-	}
-	printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-	return 1;
-}
-
-U_BOOT_CMD (buz, 2, 1, cmd_buz,
-	    "buz     - turns buzzer on/off\n",
-	    "\n" "buz <on/off>\n" "     - turns the buzzer on or off\n");
-#endif /* CONFIG_BC3450_BUZZER */
-
-
-/*
- * fp - front panel commands
- */
-static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	sm501_gpio_init ();
-
-	if (strncmp (argv[1], "on", 2) == 0) {
-		/* turn on VDD first */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_VDDEN;
-		udelay (1000);
-		/* then put data on */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_DATA;
-		/* wait some time and enable backlight */
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS;
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN;
-		return 0;
-	} else if (strncmp (argv[1], "off", 3) == 0) {
-		/* turn off the backlight first */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN;
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS;
-		udelay (200000);
-		/* wait some time, then remove data */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_DATA;
-		udelay (1000);
-		/* and remove VDD last */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &=
-			~SM501_PDC_VDDEN;
-		return 0;
-	} else if (strncmp (argv[1], "bl", 2) == 0) {
-		/* turn on/off backlight only */
-		if (strncmp (argv[2], "on", 2) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) |=
-				SM501_PDC_BIAS;
-			udelay (1000);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) |=
-				SM501_PDC_FPEN;
-			return 0;
-		} else if (strncmp (argv[2], "off", 3) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) &=
-				~SM501_PDC_FPEN;
-			udelay (1000);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) &=
-				~SM501_PDC_BIAS;
-			return 0;
-		}
-	}
-#ifdef CONFIG_BC3450_CRT
-	else if (strncmp (argv[1], "crt", 3) == 0) {
-		/* enables/disables the crt output (debug only) */
-		if (strncmp (argv[2], "on", 2) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) |=
-				(SM501_CDC_TE | SM501_CDC_E);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) &=
-				~SM501_CDC_SEL;
-			return 0;
-		} else if (strncmp (argv[2], "off", 3) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) &=
-				~(SM501_CDC_TE | SM501_CDC_E);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) |=
-				SM501_CDC_SEL;
-			return 0;
-		}
-	}
-#endif /* CONFIG_BC3450_CRT */
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (fp, 3, 1, cmd_fp,
-	    "fp      - front panes access functions\n",
-	    "\n"
-	    "fp bl <on/off>\n"
-	    "     - turns the CCFL backlight of the display on/off\n"
-	    "fp <on/off>\n" "     - turns the whole display on/off\n"
-#ifdef CONFIG_BC3450_CRT
-	    "fp crt <on/off>\n"
-	    "     - enables/disables the crt output (debug only)\n"
-#endif /* CONFIG_BC3450_CRT */
-	);
-
-
-/*
- * temp - DS1620 thermometer
- */
-/* GERSYS BC3450 specific functions */
-static inline void bc_ds1620_set_clk (int clk)
-{
-	if (clk)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
-			DS1620_CLK;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-			~DS1620_CLK;
-}
-
-static inline void bc_ds1620_set_data (int dat)
-{
-	if (dat)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
-			DS1620_DQ;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-			~DS1620_DQ;
-}
-
-static inline int bc_ds1620_get_data (void)
-{
-	vu_long rc;
-
-	rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-	rc &= DS1620_DQ;
-	if (rc != 0)
-		rc = 1;
-	return (int) rc;
-}
-
-static inline void bc_ds1620_set_data_dir (int dir)
-{
-	if (dir)		/* in */
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~DS1620_DQ;
-	else			/* out */
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= DS1620_DQ;
-}
-
-static inline void bc_ds1620_set_reset (int res)
-{
-	if (res)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_RES;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_RES;
-}
-
-/* hardware independent functions */
-static void ds1620_send_bits (int nr, int value)
-{
-	int i;
-
-	for (i = 0; i < nr; i++) {
-		bc_ds1620_set_data (value & 1);
-		bc_ds1620_set_clk (0);
-		udelay (1);
-		bc_ds1620_set_clk (1);
-		udelay (1);
-
-		value >>= 1;
-	}
-}
-
-static unsigned int ds1620_recv_bits (int nr)
-{
-	unsigned int value = 0, mask = 1;
-	int i;
-
-	bc_ds1620_set_data (0);
-
-	for (i = 0; i < nr; i++) {
-		bc_ds1620_set_clk (0);
-		udelay (1);
-
-		if (bc_ds1620_get_data ())
-			value |= mask;
-
-		mask <<= 1;
-
-		bc_ds1620_set_clk (1);
-		udelay (1);
-	}
-
-	return value;
-}
-
-static void ds1620_out (int cmd, int bits, int value)
-{
-	bc_ds1620_set_clk (1);
-	bc_ds1620_set_data_dir (0);
-
-	bc_ds1620_set_reset (0);
-	udelay (1);
-	bc_ds1620_set_reset (1);
-
-	udelay (1);
-
-	ds1620_send_bits (8, cmd);
-	if (bits)
-		ds1620_send_bits (bits, value);
-
-	udelay (1);
-
-	/* go stand alone */
-	bc_ds1620_set_data_dir (1);
-	bc_ds1620_set_reset (0);
-	bc_ds1620_set_clk (0);
-
-	udelay (10000);
-}
-
-static unsigned int ds1620_in (int cmd, int bits)
-{
-	unsigned int value;
-
-	bc_ds1620_set_clk (1);
-	bc_ds1620_set_data_dir (0);
-
-	bc_ds1620_set_reset (0);
-	udelay (1);
-	bc_ds1620_set_reset (1);
-
-	udelay (1);
-
-	ds1620_send_bits (8, cmd);
-
-	bc_ds1620_set_data_dir (1);
-	value = ds1620_recv_bits (bits);
-
-	/* go stand alone */
-	bc_ds1620_set_data_dir (1);
-	bc_ds1620_set_reset (0);
-	bc_ds1620_set_clk (0);
-
-	return value;
-}
-
-static int cvt_9_to_int (unsigned int val)
-{
-	if (val & 0x100)
-		val |= 0xfffffe00;
-
-	return val;
-}
-
-/* set thermostate thresholds */
-static void ds1620_write_state (struct therm *therm)
-{
-	ds1620_out (THERM_WRITE_TL, 9, therm->lo);
-	ds1620_out (THERM_WRITE_TH, 9, therm->hi);
-	ds1620_out (THERM_START_CONVERT, 0, 0);
-}
-
-static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	int i;
-	struct therm therm;
-
-	sm501_gpio_init ();
-
-	/* print temperature */
-	if (argc == 1) {
-		i = cvt_9_to_int (ds1620_in (THERM_READ_TEMP, 9));
-		printf ("%d.%d C\n", i >> 1, i & 1 ? 5 : 0);
-		return 0;
-	}
-
-	/* set to default operation */
-	if (strncmp (argv[1], "set", 3) == 0) {
-		if (strncmp (argv[2], "default", 3) == 0) {
-			therm.hi = +88;
-			therm.lo = -20;
-			therm.hi <<= 1;
-			therm.lo <<= 1;
-			ds1620_write_state (&therm);
-			ds1620_out (THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
-			return 0;
-		}
-	}
-
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (temp, 3, 1, cmd_temp,
-	    "temp    - print current temperature\n",
-	    "\n" "temp\n" "     - print current temperature\n");
-
-#ifdef CONFIG_BC3450_CAN
-/*
- * Initialise CAN interface
- *
- * return 1 on CAN initialization failure
- * return 0 if no failure
- */
-int can_init (void)
-{
-	static int init_done = 0;
-	int i;
-	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
-	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
-
-	/* GPIO configuration of the CAN pins is done in BC3450.h */
-
-	if (!init_done) {
-		/* init CAN 1 */
-		can1->canctl1 |= 0x80;	/* CAN enable */
-		udelay (100);
-
-		i = 0;
-		can1->canctl0 |= 0x02;	/* sleep mode */
-		/* wait until sleep mode reached */
-		while (!(can1->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not enter sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		i = 0;
-		can1->canctl0 = 0x01;	/* enter init mode */
-		/* wait until init mode reached */
-		while (!(can1->canctl1 & 0x01)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not enter init mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		can1->canctl1 = 0x80;
-		can1->canctl1 |= 0x40;
-		can1->canbtr0 = 0x0F;
-		can1->canbtr1 = 0x7F;
-		can1->canidac &= ~(0x30);
-		can1->canidar1 = 0x00;
-		can1->canidar3 = 0x00;
-		can1->canidar5 = 0x00;
-		can1->canidar7 = 0x00;
-		can1->canidmr0 = 0xFF;
-		can1->canidmr1 = 0xFF;
-		can1->canidmr2 = 0xFF;
-		can1->canidmr3 = 0xFF;
-		can1->canidmr4 = 0xFF;
-		can1->canidmr5 = 0xFF;
-		can1->canidmr6 = 0xFF;
-		can1->canidmr7 = 0xFF;
-
-		i = 0;
-		can1->canctl0 &= ~(0x01);	/* leave init mode */
-		can1->canctl0 &= ~(0x02);
-		/* wait until init and sleep mode left */
-		while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not leave init/sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-
-		/* init CAN 2 */
-		can2->canctl1 |= 0x80;	/* CAN enable */
-		udelay (100);
-
-		i = 0;
-		can2->canctl0 |= 0x02;	/* sleep mode */
-		/* wait until sleep mode reached */
-		while (!(can2->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not enter sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		i = 0;
-		can2->canctl0 = 0x01;	/* enter init mode */
-		/* wait until init mode reached */
-		while (!(can2->canctl1 & 0x01)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not enter init mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		can2->canctl1 = 0x80;
-		can2->canctl1 |= 0x40;
-		can2->canbtr0 = 0x0F;
-		can2->canbtr1 = 0x7F;
-		can2->canidac &= ~(0x30);
-		can2->canidar1 = 0x00;
-		can2->canidar3 = 0x00;
-		can2->canidar5 = 0x00;
-		can2->canidar7 = 0x00;
-		can2->canidmr0 = 0xFF;
-		can2->canidmr1 = 0xFF;
-		can2->canidmr2 = 0xFF;
-		can2->canidmr3 = 0xFF;
-		can2->canidmr4 = 0xFF;
-		can2->canidmr5 = 0xFF;
-		can2->canidmr6 = 0xFF;
-		can2->canidmr7 = 0xFF;
-		can2->canctl0 &= ~(0x01);	/* leave init mode */
-		can2->canctl0 &= ~(0x02);
-
-		i = 0;
-		/* wait until init mode left */
-		while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not leave init/sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		init_done = 1;
-	}
-	return 0;
-}
-
-/*
- * Do CAN test
- * by sending message between CAN1 and CAN2
- *
- * return 1 on CAN failure
- * return 0 if no failure
- */
-int do_can (char *argv[])
-{
-	int i;
-	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
-	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
-
-	/* send a message on CAN1 */
-	can1->cantbsel = 0x01;
-	can1->cantxfg.idr[0] = 0x55;
-	can1->cantxfg.idr[1] = 0x00;
-	can1->cantxfg.idr[1] &= ~0x8;
-	can1->cantxfg.idr[1] &= ~0x10;
-	can1->cantxfg.dsr[0] = 0xCC;
-	can1->cantxfg.dlr = 1;
-	can1->cantxfg.tbpr = 0;
-	can1->cantflg = 0x01;
-
-	i = 0;
-	while ((can1->cantflg & 0x01) == 0) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN1 send timeout, "
-				"can not send message!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-	udelay (1000);
-
-	i = 0;
-	while (!(can2->canrflg & 0x01)) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN2 receive timeout, "
-				"no message received!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-
-	if (can2->canrxfg.dsr[0] != 0xCC) {
-		printf ("%s: CAN2 receive error, "
-			"data mismatch!\n", __FUNCTION__);
-		return 1;
-	}
-
-	/* send a message on CAN2 */
-	can2->cantbsel = 0x01;
-	can2->cantxfg.idr[0] = 0x55;
-	can2->cantxfg.idr[1] = 0x00;
-	can2->cantxfg.idr[1] &= ~0x8;
-	can2->cantxfg.idr[1] &= ~0x10;
-	can2->cantxfg.dsr[0] = 0xCC;
-	can2->cantxfg.dlr = 1;
-	can2->cantxfg.tbpr = 0;
-	can2->cantflg = 0x01;
-
-	i = 0;
-	while ((can2->cantflg & 0x01) == 0) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN2 send error, "
-				"can not send message!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-	udelay (1000);
-
-	i = 0;
-	while (!(can1->canrflg & 0x01)) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN1 receive timeout, "
-				"no message received!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-
-	if (can1->canrxfg.dsr[0] != 0xCC) {
-		printf ("%s: CAN1 receive error 0x%02x\n",
-			__FUNCTION__, (can1->canrxfg.dsr[0]));
-		return 1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_BC3450_CAN */
-
-/*
- * test - BC3450 HW test routines
- */
-int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-#ifdef CONFIG_BC3450_CAN
-	int rcode;
-
-	can_init ();
-#endif /* CONFIG_BC3450_CAN */
-
-	sm501_gpio_init ();
-
-	if (argc != 2) {
-		printf ("Usage:%s\n", cmdtp->help);
-		return 1;
-	}
-
-	if (strncmp (argv[1], "unit-off", 8) == 0) {
-		printf ("waiting 2 seconds...\n");
-		udelay (2000000);
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-			~PWR_OFF;
-		return 0;
-	}
-#ifdef CONFIG_BC3450_CAN
-	else if (strncmp (argv[1], "can", 2) == 0) {
-		rcode = do_can (argv);
-		if (simple_strtoul (argv[2], NULL, 10) == 2) {
-			if (rcode == 0)
-				printf ("OK\n");
-			else
-				printf ("Error\n");
-		}
-		return rcode;
-	}
-#endif /* CONFIG_BC3450_CAN */
-
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (test, 2, 1, cmd_test, "test    - unit test routines\n", "\n"
-#ifdef CONFIG_BC3450_CAN
-	    "test can\n"
-	    "     - connect CAN1 (X8) with CAN2 (X9) for this test\n"
-#endif /* CONFIG_BC3450_CAN */
-	    "test unit-off\n"
-	    "     - turns off the BC3450 unit\n"
-	    "       WARNING: Unsaved environment variables will be lost!\n");
-#endif /* CFG_CMD_BSP */
diff --git a/board/bc3450/config.mk b/board/bc3450/config.mk
deleted file mode 100644
index 47e9955789..0000000000
--- a/board/bc3450/config.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# BC3450 board:
-#
-#	Valid values for TEXT_BASE are:
-#
-#	0xFC000000   boot low (standard configuration with room for max 64 MByte
-#		     Flash ROM)
-#	0x00100000   boot from RAM (for testing only)
-#
-
-ifndef TEXT_BASE
-## Standard: boot low
-TEXT_BASE = 0xFC000000
-## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h
deleted file mode 100644
index 3f1e1691bb..0000000000
--- a/board/bc3450/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-/* #define SDRAM_MODE	0x008D0000 */ /* CAS latency 2 */
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-/* #define SDRAM_CONFIG1	0xD2222800 */ /* CAS latency 2 */
-/*#define SDRAM_CONFIG1	0xD7322800 */ /* SDRAM controller bug workaround */
-#define SDRAM_CONFIG2	0x8AD70000
-/*#define SDRAM_CONFIG2	0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xC2222600
-#define SDRAM_CONFIG2	0x88B70004
-#define SDRAM_ADDRSEL	0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/bc3450/u-boot.lds b/board/bc3450/u-boot.lds
deleted file mode 100644
index 93b98a8f5c..0000000000
--- a/board/bc3450/u-boot.lds
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/canmb/Makefile b/board/canmb/Makefile
deleted file mode 100644
index 23d410d14e..0000000000
--- a/board/canmb/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-#ifneq ($(OBJTREE),$(SRCTREE))
-#$(shell mkdir -p $(obj)../common)
-#endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-#../common/flash.o ../common/vpd.o ../common/am79c874.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c
deleted file mode 100644
index 1782b314f8..0000000000
--- a/board/canmb/canmb.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-#include "mt48lc16m32s2-75.h"
-#endif
-
-#ifndef CFG_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-#if defined(CONFIG_MPC5200)
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize + dramsize2;
-}
-
-#elif defined(CONFIG_MGT5100)
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup and enable SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-	__asm__ volatile ("sync");
-
-	/* find RAM size */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
-	/* Retrieve amount of SDRAM available */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
-int checkboard (void)
-{
-	puts ("Board: CANMB\n");
-	return 0;
-}
-
-int board_early_init_r (void)
-{
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
-	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
-	return 0;
-}
diff --git a/board/canmb/config.mk b/board/canmb/config.mk
deleted file mode 100644
index a163b34d65..0000000000
--- a/board/canmb/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2005
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2003
-# Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# CANMB board
-#
-# allowed and functional TEXT_BASE values:
-#
-#   0xfe000000		low boot at 0x00000100 (default board setting)
-#	0x00100000		RAM load and test
-#
-
-TEXT_BASE = 0xFE000000
-#TEXT_BASE = 0x00100000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h
deleted file mode 100644
index ffdf0396a5..0000000000
--- a/board/canmb/mt48lc16m32s2-75.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xC2222600
-#define SDRAM_CONFIG2	0x88B70004
-#define SDRAM_ADDRSEL	0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/canmb/u-boot.lds b/board/canmb/u-boot.lds
deleted file mode 100644
index 88dc118e8f..0000000000
--- a/board/canmb/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cds/common/cadmus.c b/board/cds/common/cadmus.c
deleted file mode 100644
index 5f86de5af2..0000000000
--- a/board/cds/common/cadmus.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-
-
-/*
- * CADMUS Board System Registers
- */
-#ifndef CFG_CADMUS_BASE_REG
-#define CFG_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
-#endif
-
-typedef struct cadmus_reg {
-    u_char cm_ver;		/* Board version */
-    u_char cm_csr;		/* General control/status */
-    u_char cm_rst;		/* Reset control */
-    u_char cm_hsclk;		/* High speed clock */
-    u_char cm_hsxclk;		/* High speed clock extended */
-    u_char cm_led;		/* LED data */
-    u_char cm_pci;		/* PCI control/status */
-    u_char cm_dma;		/* DMA control */
-    u_char cm_reserved[248];	/* Total 256 bytes */
-} cadmus_reg_t;
-
-
-unsigned int
-get_board_version(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	return cadmus->cm_ver;
-}
-
-
-unsigned long
-get_clock_freq(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
-
-	if (pci1_speed == 0) {
-		return 33000000;
-	} else if (pci1_speed == 1) {
-		return 66000000;
-	} else {
-		/* Really, unknown. Be safe? */
-		return 33000000;
-	}
-}
-
-
-unsigned int
-get_pci_slot(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	/*
-	 * PCI slot in USER bits CSR[6:7] by convention.
-	 */
-	return ((cadmus->cm_csr >> 6) & 0x3) + 1;
-}
-
-
-unsigned int
-get_pci_dual(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	/*
-	 * PCI DUAL in CM_PCI[3]
-	 */
-	return cadmus->cm_pci & 0x10;
-}
diff --git a/board/cds/common/cadmus.h b/board/cds/common/cadmus.h
deleted file mode 100644
index 217ea64251..0000000000
--- a/board/cds/common/cadmus.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CADMUS_H_
-#define __CADMUS_H_
-
-
-/*
- * CADMUS Board System Register interface.
- */
-
-/*
- * Returns board version register.
- */
-extern unsigned int get_board_version(void);
-
-/*
- * Returns either 33000000 or 66000000 as the SYS_CLK_FREQ.
- */
-extern unsigned long get_clock_freq(void);
-
-
-/*
- * Returns 1 - 4, as found in the USER CSR[6:7] bits.
- */
-extern unsigned int get_pci_slot(void);
-
-
-/*
- * Returns PCI DUAL as found in CM_PCI[3].
- */
-extern unsigned int get_pci_dual(void);
-
-
-#endif	/* __CADMUS_H_ */
diff --git a/board/cds/common/eeprom.c b/board/cds/common/eeprom.c
deleted file mode 100644
index 5034e0ca2e..0000000000
--- a/board/cds/common/eeprom.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
-	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
-	u8 idee_major;
-	u8 idee_minor;
-	char idee_serial[10];
-	char idee_errata[2];
-	char idee_date[8];		/* yyyymmdd */
-	/* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
-	uint major = 0;
-	uint minor = 0;
-
-	id_eeprom_t id_eeprom;
-
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
-		 (uchar *) &id_eeprom, sizeof(id_eeprom));
-
-	major = id_eeprom.idee_major;
-	minor = id_eeprom.idee_minor;
-
-	if (major == 0xff && minor == 0xff) {
-		major = minor = 0;
-	}
-
-	return MPC85XX_CPU_BOARD_REV(major,minor);
-}
diff --git a/board/cds/common/eeprom.h b/board/cds/common/eeprom.h
deleted file mode 100644
index 12a0789049..0000000000
--- a/board/cds/common/eeprom.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __EEPROM_H_
-#define __EEPROM_H_
-
-
-/*
- * EEPROM Board System Register interface.
- */
-
-
-/*
- * CPU Board Revision
- */
-#define MPC85XX_CPU_BOARD_REV(maj, min)	((((maj)&0xff) << 8) | ((min) & 0xff))
-#define MPC85XX_CPU_BOARD_MAJOR(rev)	(((rev) >> 8) & 0xff)
-#define MPC85XX_CPU_BOARD_MINOR(rev)	((rev) & 0xff)
-
-#define MPC85XX_CPU_BOARD_REV_UNKNOWN	MPC85XX_CPU_BOARD_REV(0,0)
-#define MPC85XX_CPU_BOARD_REV_1_0	MPC85XX_CPU_BOARD_REV(1,0)
-#define MPC85XX_CPU_BOARD_REV_1_1	MPC85XX_CPU_BOARD_REV(1,1)
-
-/*
- * Returns CPU board revision register as a 16-bit value with
- * the Major in the high byte, and Minor in the low byte.
- */
-extern unsigned int get_cpu_board_revision(void);
-
-
-#endif	/* __CADMUS_H_ */
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
deleted file mode 100644
index 9d97905ca9..0000000000
--- a/board/cds/common/ft_board.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#include "cadmus.h"
-
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-
-static void cds_pci_fixup(void *blob)
-{
-	int len;
-	u32 *map;
-	int slot;
-	int i;
-
-	map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
-
-	len /= sizeof(u32);
-
-	slot = get_pci_slot();
-
-	for (i=0;i<len;i+=7) {
-		/* We rotate the interrupt pins so that the mapping
-		 * changes depending on the slot the carrier card is in.
-		 */
-		map[3] = ((map[3] + slot - 2) % 4) + 1;
-
-		map+=7;
-	}
-}
-#endif
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-
-	cds_pci_fixup(blob);
-}
-#endif
diff --git a/board/cds/common/via.c b/board/cds/common/via.c
deleted file mode 100644
index e79bd02a12..0000000000
--- a/board/cds/common/via.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-/* Config the VIA chip */
-void mpc85xx_config_via(struct pci_controller *hose,
-			pci_dev_t dev, struct pci_config_table *tab)
-{
-	pci_dev_t bridge;
-
-	/* Enable USB and IDE functions */
-	pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
-
-	pciauto_config_device(hose, dev);
-
-	/*
-	 * Force the backplane P2P bridge to have a window
-	 * open from 0x00000000-0x00001fff in PCI I/O space.
-	 * This allows legacy I/O (i8259, etc) on the VIA
-	 * southbridge to be accessed.
-	 */
-	bridge = PCI_BDF(0,17,0);
-	pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
-	pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
-	pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
-	pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
-}
-
-/* Function 1, IDE */
-void mpc85xx_config_via_usbide(struct pci_controller *hose,
-			       pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-	/*
-	 * Since the P2P window was forced to cover the fixed
-	 * legacy I/O addresses, it is necessary to manually
-	 * place the base addresses for the IDE and USB functions
-	 * within this window.
-	 */
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
-}
-
-/* Function 2, USB ports 0-1 */
-void mpc85xx_config_via_usb(struct pci_controller *hose,
-			    pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
-}
-
-/* Function 3, USB ports 2-3 */
-void mpc85xx_config_via_usb2(struct pci_controller *hose,
-			     pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
-}
-
-/* Function 5, Power Management */
-void mpc85xx_config_via_power(struct pci_controller *hose,
-			      pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
-}
-
-/* Function 6, AC97 Interface */
-void mpc85xx_config_via_ac97(struct pci_controller *hose,
-			     pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
-}
diff --git a/board/cds/common/via.h b/board/cds/common/via.h
deleted file mode 100644
index 77cfacc526..0000000000
--- a/board/cds/common/via.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _MPC85xx_VIA_H
-void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 1, IDE */
-void mpc85xx_config_via_usbide(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 2, USB ports 0-1 */
-void mpc85xx_config_via_usb(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 3, USB ports 2-3 */
-void mpc85xx_config_via_usb2(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 5, Power Management */
-void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 6, AC97 Interface */
-void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-#endif /* _MPC85xx_VIA_H */
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8541cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8541cds/config.mk b/board/cds/mpc8541cds/config.mk
deleted file mode 100644
index 17cc8bce9c..0000000000
--- a/board/cds/mpc8541cds/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8541cds board
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8541=1
diff --git a/board/cds/mpc8541cds/init.S b/board/cds/mpc8541cds/init.S
deleted file mode 100644
index 978bda5e4d..0000000000
--- a/board/cds/mpc8541cds/init.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCI2 MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xb0000000	256M	PCI2 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 * 0xe300_0000	16M	PCI2 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
- * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-
-law_entry:
-	entry_start
-	.long 6
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
-	entry_end
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
deleted file mode 100644
index a42904cf73..0000000000
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur= &immap->im_gur;
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-	uint temp_lbcdll;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
-
-	} else {
-		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * Determine which address lines to use baed on CPU board rev.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-	} else {
-		/*
-		 * Assume something unable to identify itself is
-		 * really old, and likely has lines 16/17 mapped.
-		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	}
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_PCI)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
-};
-
-static struct pci_controller hose[] = {
-	{ config_table: pci_mpc85xxcds_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(hose);
-#endif
-}
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/cds/mpc8541cds/u-boot.lds
deleted file mode 100644
index 1bea0074fa..0000000000
--- a/board/cds/mpc8541cds/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8541cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8541cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8548cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8548cds/config.mk b/board/cds/mpc8548cds/config.mk
deleted file mode 100644
index 242a676200..0000000000
--- a/board/cds/mpc8548cds/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8548cds board
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
deleted file mode 100644
index 978bda5e4d..0000000000
--- a/board/cds/mpc8548cds/init.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCI2 MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xb0000000	256M	PCI2 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 * 0xe300_0000	16M	PCI2 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
- * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-
-law_entry:
-	entry_start
-	.long 6
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
-	entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
deleted file mode 100644
index 7433ebf25b..0000000000
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <spd.h>
-#include <miiphy.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-
-	/*
-	 * Hack TSEC 3 and 4 IO voltages.
-	 */
-	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
-
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur= &immap->im_gur;
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	gur->lbiuiplldcr1 = 0x00078080;
-	if (clkdiv == 16) {
-		gur->lbiuiplldcr0 = 0x7c0f1bf0;
-	} else if (clkdiv == 8) {
-		gur->lbiuiplldcr0 = 0x6c0f1bf0;
-	} else if (clkdiv == 4) {
-		gur->lbiuiplldcr0 = 0x5c0f1bf0;
-	}
-
-	lbc->lcrr |= 0x00030000;
-
-	asm("sync;isync;msync");
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * MPC8548 uses "new" 15-16 style addressing.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_PCI)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
-};
-
-static struct pci_controller hose[] = {
-	{ config_table: pci_mpc85xxcds_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif
-}
-
-int last_stage_init(void)
-{
-	unsigned short temp;
-
-	/* Change the resistors for the PHY */
-	/* This is needed to get the RGMII working for the 1.3+
-	 * CDS cards */
-	if (get_board_version() ==  0x13) {
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 29, 18);
-
-		miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, &temp);
-
-		temp = (temp & 0xf03f);
-		temp |= 2 << 9;		/* 36 ohm */
-		temp |= 2 << 6;		/* 39 ohm */
-
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, temp);
-
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 29, 3);
-
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, 0x8000);
-	}
-
-	return 0;
-}
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds
deleted file mode 100644
index 2c8fe9603d..0000000000
--- a/board/cds/mpc8548cds/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8548cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8548cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8555cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8555cds/config.mk b/board/cds/mpc8555cds/config.mk
deleted file mode 100644
index 5dcaa774db..0000000000
--- a/board/cds/mpc8555cds/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8555cds board
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8555=1
diff --git a/board/cds/mpc8555cds/init.S b/board/cds/mpc8555cds/init.S
deleted file mode 100644
index 978bda5e4d..0000000000
--- a/board/cds/mpc8555cds/init.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCI2 MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xb0000000	256M	PCI2 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 * 0xe300_0000	16M	PCI2 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
- * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-
-law_entry:
-	entry_start
-	.long 6
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
-	entry_end
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
deleted file mode 100644
index d980ea6310..0000000000
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur= &immap->im_gur;
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-	uint temp_lbcdll;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
-
-	} else {
-		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * Determine which address lines to use baed on CPU board rev.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-	} else {
-		/*
-		 * Assume something unable to identify itself is
-		 * really old, and likely has lines 16/17 mapped.
-		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	}
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PCI
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
-};
-
-
-static struct pci_controller hose[] = {
-	{
-	config_table: pci_mpc85xxcds_config_table,
-	},
-#ifdef CONFIG_MPC85XX_PCI2
-	{ }
-#endif
-};
-
-#endif
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(hose);
-#endif
-}
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/cds/mpc8555cds/u-boot.lds
deleted file mode 100644
index 2aa2ad78fc..0000000000
--- a/board/cds/mpc8555cds/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8555cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8555cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/csb272/Makefile b/board/csb272/Makefile
deleted file mode 100644
index 703a25c979..0000000000
--- a/board/csb272/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-#COBJS	= $(BOARD).o flash.o
-#COBJS	= $(BOARD).o strataflash.o
-COBJS	= $(BOARD).o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb272/config.mk b/board/csb272/config.mk
deleted file mode 100644
index 4672f08172..0000000000
--- a/board/csb272/config.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004
-# Tolunay Orkun, NextIO Inc., torkun@nextio.com.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Cogent CSB272 board
-#
-
-LDFLAGS += $(LINKER_UNDEFS)
-
-TEXT_BASE := 0xFFFC0000
-#TEXT_BASE := 0x00100000
-
-PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
deleted file mode 100644
index 24c6f0d986..0000000000
--- a/board/csb272/csb272.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * (C) Copyright 2004
- * Tolunay Orkun, Nextio Inc., torkun@nextio.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <ppc4xx_enet.h>
-
-/*
- * Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
- *
- * CLKA output => Epson LCD Controller
- * CLKB output => Not Connected
- * CLKC output => Ethernet
- * CLKD output => UART external clock
- *
- * Note: these values are obtained from device after init by micromonitor
-*/
-uchar pll_fs6377_regs[16] = {
-	0x28, 0xef, 0x53, 0x03, 0x4b, 0x80, 0x32, 0x80,
-	0x94, 0x32, 0x80, 0xd4, 0x56, 0xf6, 0xf6, 0xe0 };
-
-/*
- * pll_init: Initialize AMIS IC FS6377-01 PLL
- *
- * PLL supplies Epson LCD Clock, Ethernet Clock and UART external clock
- *
- */
-int pll_init(void)
-{
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
-	return  i2c_write(CFG_I2C_PLL_ADDR, 0, 1,
-		(uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
-}
-
-/*
- * board_early_init_f: do early board initialization
- *
- */
-int board_early_init_f(void)
-{
-	/* initialize PLL so UART, LCD, Ethernet clocked at correctly */
-	(void) get_clocks();
-	pll_init();
-
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the Walnut board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-   |       IRQ 27 (EXT IRQ 2) Not Used
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for Walnut board:
-   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-   |       interrupt. The FPGA must be read to determine which device
-   |       caused the interrupt. The default setting of the FPGA clears
-   |
-   +-------------------------------------------------------------------------*/
-
-	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
-	mtdcr (uicer, 0x00000000);   /* disable all ints */
-	mtdcr (uiccr, 0x00000000);   /* set all to be non-critical */
-	mtdcr (uicpr, 0xFFFFFF83);   /* set int polarities */
-	mtdcr (uictr, 0x10000000);   /* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
-
-	mtebc (epcr, 0xa8400000);   /* EBC always driven */
-
-	return 0; /* success */
-}
-
-/*
- * checkboard: identify/verify the board we are running
- *
- * Remark: we just assume it is correct board here!
- *
- */
-int checkboard(void)
-{
-	printf("BOARD: Cogent CSB272\n");
-
-	return 0; /* success */
-}
-
-/*
- * initram: Determine the size of mounted DRAM
- *
- * Size is determined by reading SDRAM configuration registers as
- * configured by initialization code
- *
- */
-long initdram (int board_type)
-{
-	ulong tot_size;
-	ulong bank_size;
-	ulong tmp;
-
-	tot_size = 0;
-
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	return tot_size;
-}
-
-/*
- * last_stage_init: final configurations (such as PHY etc)
- *
- */
-int last_stage_init(void)
-{
-	/* initialize the PHY */
-	miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
-
-	/* AUTO neg */
-	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-
-	/* LEDs     */
-	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
-
-
-	return 0; /* success */
-}
diff --git a/board/csb272/init.S b/board/csb272/init.S
deleted file mode 100644
index e00ebf89c1..0000000000
--- a/board/csb272/init.S
+++ /dev/null
@@ -1,216 +0,0 @@
-/******************************************************************************
- *
- *	 This source code has been made available to you by IBM on an AS-IS
- *	 basis.	 Anyone receiving this source is licensed under IBM
- *	 copyrights to use it in any way he or she deems fit, including
- *	 copying it, modifying it, compiling it, and redistributing it either
- *	 with or without modifications.	 No license under IBM patents or
- *	 patent applications is to be implied by the copyright license.
- *
- *	 Any user of this software should understand that IBM cannot provide
- *	 technical support for this software and will not be responsible for
- *	 any consequences resulting from the use of this software.
- *
- *	 Any person who transfers this source code or any derivative work
- *	 must include the IBM copyright notice, this paragraph, and the
- *	 preceding two paragraphs in the transferred software.
- *
- *	 COPYRIGHT   I B M   CORPORATION 1995
- *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
- *
- *****************************************************************************/
-#include <config.h>
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define LI32(reg,val) \
-	addis   reg,0,val@h;\
-	ori     reg,reg,val@l
-
-#define WDCR_EBC(reg,val) \
-	addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
-	addis   r4,0,val@h;\
-	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
-
-#define WDCR_SDRAM(reg,val) \
-	addi    r4,0,reg;\
-	mtdcr   memcfga,r4;\
-	addis   r4,0,val@h;\
-	ori     r4,r4,val@l;\
-	mtdcr   memcfgd,r4
-
-/******************************************************************************
- * Function:	ext_bus_cntlr_init
- *
- * Description:	Configures EBC Controller and a few basic chip selects.
- *
- *		CS0 is setup to get the Boot Flash out of the addresss range
- *		so that we may setup a stack.  CS7 is setup so that we can
- *		access and reset the hardware watchdog.
- *
- *		IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *
- * Notes:	Does NOT use the stack.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	ext_bus_cntlr_init
-	.type	ext_bus_cntlr_init, @function
-ext_bus_cntlr_init:
-	mflr	r0
-	/********************************************************************
-	 * Prefetch entire ext_bus_cntrl_init function into the icache.
-	 * This is necessary because we are going to change the same CS we
-	 * are executing from.  Otherwise a CPU lockup may occur.
-	 *******************************************************************/
-	bl	..getAddr
-..getAddr:
-	mflr	r3			/* get address of ..getAddr */
-
-	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
-	mtctr	r4
-..ebcloop:
-	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
-	bdnz	..ebcloop		/* continue for $CTR cache lines */
-
-	/********************************************************************
-	 * Delay to ensure all accesses to ROM are complete before changing
-	 * bank 0 timings. 200usec should be enough.
-	 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
-	 *******************************************************************/
-	addis	r3, 0, 0x0
-	ori	r3, r3, 0xA000		/* wait 200us from reset */
-	mtctr	r3
-..spinlp:
-	bdnz	..spinlp		/* spin loop */
-
-	/********************************************************************
-	 * SETUP CPC0_CR0
-	 *******************************************************************/
-	LI32(r4, 0x007000c0)
-	mtdcr	cntrl0, r4
-
-	/********************************************************************
-	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
-	 *******************************************************************/
-	mfdcr	r4, cntrl1
-	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
-
-	/********************************************************************
-	 * Setup External Bus Controller (EBC).
-	 *******************************************************************/
-	WDCR_EBC(epcr, 0xd84c0000)
-	/********************************************************************
-	 * Memory Bank 0 (Intel 28F128J3 Flash) initialization
-	 *******************************************************************/
-	/*WDCR_EBC(pb0ap, 0x02869200)*/
-	WDCR_EBC(pb0ap, 0x07869200)
-	WDCR_EBC(pb0cr, 0xfe0bc000)
-	/********************************************************************
-	 * Memory Bank 1 (Holtek HT6542B PS/2) initialization
-	 *******************************************************************/
-	WDCR_EBC(pb1ap, 0x1f869200)
-	WDCR_EBC(pb1cr, 0xf0818000)
-	/********************************************************************
-	 * Memory Bank 2 (Epson S1D13506) initialization
-	 *******************************************************************/
-	WDCR_EBC(pb2ap, 0x05860300)
-	WDCR_EBC(pb2cr, 0xf045a000)
-	/********************************************************************
-	 * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
-	 *******************************************************************/
-	WDCR_EBC(pb3ap, 0x0387d200)
-	WDCR_EBC(pb3cr, 0xf021c000)
-	/********************************************************************
-	 * Memory Bank 4-7 (Unused) initialization
-	 *******************************************************************/
-	WDCR_EBC(pb4ap, 0)
-	WDCR_EBC(pb4cr, 0)
-	WDCR_EBC(pb5ap, 0)
-	WDCR_EBC(pb5cr, 0)
-	WDCR_EBC(pb6ap, 0)
-	WDCR_EBC(pb6cr, 0)
-	WDCR_EBC(pb7ap, 0)
-	WDCR_EBC(pb7cr, 0)
-
-	/* We are all done */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-.Lfe0:	.size	ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
-/* end ext_bus_cntlr_init() */
-
-/******************************************************************************
- * Function:	sdram_init
- *
- * Description:	Configures SDRAM memory banks.
- *
- * Notes:	Does NOT use the stack.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	sdram_init
-	.type	sdram_init, @function
-sdram_init:
-
-	/*
-	 * Disable memory controller to allow
-	 * values to be changed.
-	 */
-	WDCR_SDRAM(mem_mcopt1, 0x00000000)
-
-	/*
-	 * Configure Memory Banks
-	 */
-	WDCR_SDRAM(mem_mb0cf, 0x00084001)
-	WDCR_SDRAM(mem_mb1cf, 0x00000000)
-	WDCR_SDRAM(mem_mb2cf, 0x00000000)
-	WDCR_SDRAM(mem_mb3cf, 0x00000000)
-
-	/*
-	 * Set up SDTR1 (SDRAM Timing Register)
-	 */
-	WDCR_SDRAM(mem_sdtr1, 0x00854009)
-
-	/*
-	 * Set RTR (Refresh Timing Register)
-	 */
-	WDCR_SDRAM(mem_rtr,   0x10000000)
-	/* WDCR_SDRAM(mem_rtr,   0x05f00000) */
-
-	/********************************************************************
-	 * Delay to ensure 200usec have elapsed since reset. Assume worst
-	 * case that the core is running 200Mhz:
-	 *	  200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
-	 *******************************************************************/
-	addis   r3, 0, 0x0000
-	ori     r3, r3, 0xA000		/* Wait >200us from reset */
-	mtctr   r3
-..spinlp2:
-	bdnz    ..spinlp2		/* spin loop */
-
-	/********************************************************************
-	 * Set memory controller options reg, MCOPT1.
-	 *******************************************************************/
-	WDCR_SDRAM(mem_mcopt1,0x80800000)
-
-..sdri_done:
-	blr				/* Return to calling function */
-.Lfe1:	.size	sdram_init,.Lfe1-sdram_init
-/* end sdram_init() */
diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds
deleted file mode 100644
index d75d6d1ce9..0000000000
--- a/board/csb272/u-boot.lds
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/csb272/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    lib_ppc/extable.o	(.text)
-    lib_ppc/board.o	(.text)
-    lib_generic/zlib.o	(.text)
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/csb472/Makefile b/board/csb472/Makefile
deleted file mode 100644
index 703a25c979..0000000000
--- a/board/csb472/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-#COBJS	= $(BOARD).o flash.o
-#COBJS	= $(BOARD).o strataflash.o
-COBJS	= $(BOARD).o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb472/config.mk b/board/csb472/config.mk
deleted file mode 100644
index 04aefd1f82..0000000000
--- a/board/csb472/config.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004
-# Tolunay Orkun, NextIO Inc., torkun@nextio.com.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Cogent CSB472 board
-#
-
-LDFLAGS += $(LINKER_UNDEFS)
-
-TEXT_BASE := 0xFFFC0000
-#TEXT_BASE := 0x00100000
-
-PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c
deleted file mode 100644
index 833bbce923..0000000000
--- a/board/csb472/csb472.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2004
- * Tolunay Orkun, Nextio Inc., torkun@nextio.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <ppc4xx_enet.h>
-
-/*
- * board_early_init_f: do early board initialization
- *
- */
-int board_early_init_f(void)
-{
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the Walnut board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-   |       IRQ 27 (EXT IRQ 2) Not Used
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for Walnut board:
-   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-   |       interrupt. The FPGA must be read to determine which device
-   |       caused the interrupt. The default setting of the FPGA clears
-   |
-   +-------------------------------------------------------------------------*/
-
-	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
-	mtdcr (uicer, 0x00000000);   /* disable all ints */
-	mtdcr (uiccr, 0x00000000);   /* set all to be non-critical */
-	mtdcr (uicpr, 0xFFFFFF83);   /* set int polarities */
-	mtdcr (uictr, 0x10000000);   /* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
-
-	mtebc (epcr, 0xa8400000);   /* EBC always driven */
-
-	return 0; /* success */
-}
-
-/*
- * checkboard: identify/verify the board we are running
- *
- * Remark: we just assume it is correct board here!
- *
- */
-int checkboard(void)
-{
-	printf("BOARD: Cogent CSB472\n");
-
-	return 0; /* success */
-}
-
-/*
- * initram: Determine the size of mounted DRAM
- *
- * Size is determined by reading SDRAM configuration registers as
- * configured by initialization code
- *
- */
-long initdram (int board_type)
-{
-	ulong tot_size;
-	ulong bank_size;
-	ulong tmp;
-
-	tot_size = 0;
-
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
-	if (tmp & 0x00000001) {
-		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
-		tot_size += bank_size;
-	}
-
-	return tot_size;
-}
-
-/*
- * last_stage_init: final configurations (such as PHY etc)
- *
- */
-int last_stage_init(void)
-{
-	/* initialize the PHY */
-	miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
-
-	/* AUTO neg */
-	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-
-	/* LEDs     */
-	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
-
-	return 0; /* success */
-}
diff --git a/board/csb472/init.S b/board/csb472/init.S
deleted file mode 100644
index aec42a14b9..0000000000
--- a/board/csb472/init.S
+++ /dev/null
@@ -1,212 +0,0 @@
-/******************************************************************************
- *
- *	 This source code has been made available to you by IBM on an AS-IS
- *	 basis.	 Anyone receiving this source is licensed under IBM
- *	 copyrights to use it in any way he or she deems fit, including
- *	 copying it, modifying it, compiling it, and redistributing it either
- *	 with or without modifications.	 No license under IBM patents or
- *	 patent applications is to be implied by the copyright license.
- *
- *	 Any user of this software should understand that IBM cannot provide
- *	 technical support for this software and will not be responsible for
- *	 any consequences resulting from the use of this software.
- *
- *	 Any person who transfers this source code or any derivative work
- *	 must include the IBM copyright notice, this paragraph, and the
- *	 preceding two paragraphs in the transferred software.
- *
- *	 COPYRIGHT   I B M   CORPORATION 1995
- *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
- *
- *****************************************************************************/
-#include <config.h>
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define LI32(reg,val) \
-	addis   reg,0,val@h;\
-	ori     reg,reg,val@l
-
-#define WDCR_EBC(reg,val) \
-	addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
-	addis   r4,0,val@h;\
-	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
-
-#define WDCR_SDRAM(reg,val) \
-	addi    r4,0,reg;\
-	mtdcr   memcfga,r4;\
-	addis   r4,0,val@h;\
-	ori     r4,r4,val@l;\
-	mtdcr   memcfgd,r4
-
-/******************************************************************************
- * Function:	ext_bus_cntlr_init
- *
- * Description:	Configures EBC Controller and a few basic chip selects.
- *
- *		CS0 is setup to get the Boot Flash out of the addresss range
- *		so that we may setup a stack.  CS7 is setup so that we can
- *		access and reset the hardware watchdog.
- *
- *		IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *
- * Notes:	Does NOT use the stack.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	ext_bus_cntlr_init
-	.type	ext_bus_cntlr_init, @function
-ext_bus_cntlr_init:
-	mflr	r0
-	/********************************************************************
-	 * Prefetch entire ext_bus_cntrl_init function into the icache.
-	 * This is necessary because we are going to change the same CS we
-	 * are executing from.  Otherwise a CPU lockup may occur.
-	 *******************************************************************/
-	bl	..getAddr
-..getAddr:
-	mflr	r3			/* get address of ..getAddr */
-
-	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
-	mtctr	r4
-..ebcloop:
-	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
-	bdnz	..ebcloop		/* continue for $CTR cache lines */
-
-	/********************************************************************
-	 * Delay to ensure all accesses to ROM are complete before changing
-	 * bank 0 timings. 200usec should be enough.
-	 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
-	 *******************************************************************/
-	addis	r3, 0, 0x0
-	ori	r3, r3, 0xA000		/* wait 200us from reset */
-	mtctr	r3
-..spinlp:
-	bdnz	..spinlp		/* spin loop */
-
-	/********************************************************************
-	 * SETUP CPC0_CR0
-	 *******************************************************************/
-	LI32(r4, 0x00c01030)
-	mtdcr	cntrl0, r4
-
-	/********************************************************************
-	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
-	 *******************************************************************/
-	mfdcr	r4, cntrl1
-	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
-
-	/********************************************************************
-	 * Setup External Bus Controller (EBC).
-	 *******************************************************************/
-	WDCR_EBC(epcr, 0xd84c0000)
-	/********************************************************************
-	 * Memory Bank 0 (Intel 28F640J3 Flash) initialization
-	 *******************************************************************/
-	/*WDCR_EBC(pb0ap, 0x03055200)*/
-	/*WDCR_EBC(pb0ap, 0x04055200)*/
-	WDCR_EBC(pb0ap, 0x08055200)
-	WDCR_EBC(pb0cr, 0xff87a000)
-	/********************************************************************
-	 * Memory Bank 3 (Xilinx XC95144 CPLD) initialization
-	 *******************************************************************/
-	/*WDCR_EBC(pb3ap, 0x07869200)*/
-	WDCR_EBC(pb3ap, 0x04055200)
-	WDCR_EBC(pb3cr, 0xf081c000)
-	/********************************************************************
-	 * Memory Bank 1,2,4-7 (Unused) initialization
-	 *******************************************************************/
-	WDCR_EBC(pb1ap, 0)
-	WDCR_EBC(pb1cr, 0)
-	WDCR_EBC(pb2ap, 0)
-	WDCR_EBC(pb2cr, 0)
-	WDCR_EBC(pb4ap, 0)
-	WDCR_EBC(pb4cr, 0)
-	WDCR_EBC(pb5ap, 0)
-	WDCR_EBC(pb5cr, 0)
-	WDCR_EBC(pb6ap, 0)
-	WDCR_EBC(pb6cr, 0)
-	WDCR_EBC(pb7ap, 0)
-	WDCR_EBC(pb7cr, 0)
-
-	/* We are all done */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-.Lfe0:	.size	ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
-/* end ext_bus_cntlr_init() */
-
-/******************************************************************************
- * Function:	sdram_init
- *
- * Description:	Configures SDRAM memory banks.
- *
- * Notes:	Does NOT use the stack.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	sdram_init
-	.type	sdram_init, @function
-sdram_init:
-
-	/*
-	 * Disable memory controller to allow
-	 * values to be changed.
-	 */
-	WDCR_SDRAM(mem_mcopt1, 0x00000000)
-
-	/*
-	 * Configure Memory Banks
-	 */
-	WDCR_SDRAM(mem_mb0cf, 0x00062001)
-	WDCR_SDRAM(mem_mb1cf, 0x00000000)
-	WDCR_SDRAM(mem_mb2cf, 0x00000000)
-	WDCR_SDRAM(mem_mb3cf, 0x00000000)
-
-	/*
-	 * Set up SDTR1 (SDRAM Timing Register)
-	 */
-	WDCR_SDRAM(mem_sdtr1, 0x00854009)
-
-	/*
-	 * Set RTR (Refresh Timing Register)
-	 */
-	WDCR_SDRAM(mem_rtr,   0x10000000)
-	/* WDCR_SDRAM(mem_rtr,   0x05f00000) */
-
-	/********************************************************************
-	 * Delay to ensure 200usec have elapsed since reset. Assume worst
-	 * case that the core is running 200Mhz:
-	 *	  200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
-	 *******************************************************************/
-	addis   r3, 0, 0x0000
-	ori     r3, r3, 0xA000		/* Wait >200us from reset */
-	mtctr   r3
-..spinlp2:
-	bdnz    ..spinlp2		/* spin loop */
-
-	/********************************************************************
-	 * Set memory controller options reg, MCOPT1.
-	 *******************************************************************/
-	WDCR_SDRAM(mem_mcopt1,0x80800000)
-
-..sdri_done:
-	blr				/* Return to calling function */
-.Lfe1:	.size	sdram_init,.Lfe1-sdram_init
-/* end sdram_init() */
diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds
deleted file mode 100644
index 14ac3fb4fc..0000000000
--- a/board/csb472/u-boot.lds
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/csb472/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    lib_ppc/extable.o	(.text)
-    lib_ppc/board.o	(.text)
-    lib_generic/zlib.o	(.text)
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
deleted file mode 100644
index ce263aa84e..0000000000
--- a/board/csb637/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= csb637.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb637/config.mk b/board/csb637/config.mk
deleted file mode 100644
index 4c6f631134..0000000000
--- a/board/csb637/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x23fc0000
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
deleted file mode 100644
index aeb1a138d2..0000000000
--- a/board/csb637/csb637.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <at91rm9200_net.h>
-#include <bcm5221.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* Enable Ctrlc */
-	console_init_f ();
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of CSB637-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_CSB637;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
-
-/*
- * Name:
- *	at91rm9200_GetPhyInterface
- * Description:
- *	Initialise the interface functions to the PHY
- * Arguments:
- *	None
- * Return value:
- *	None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-	p_phyops->Init		 = bcm5221_InitPhy;
-	p_phyops->IsPhyConnected = bcm5221_IsPhyConnected;
-	p_phyops->GetLinkSpeed	 = bcm5221_GetLinkSpeed;
-	p_phyops->AutoNegotiate	 = bcm5221_AutoNegotiate;
-}
-
-#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/board/csb637/u-boot.lds b/board/csb637/u-boot.lds
deleted file mode 100644
index 76df6b2af1..0000000000
--- a/board/csb637/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm920t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/delta/Makefile b/board/delta/Makefile
deleted file mode 100644
index 7213328609..0000000000
--- a/board/delta/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= delta.o nand.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/delta/config.mk b/board/delta/config.mk
deleted file mode 100644
index 3fe406ca02..0000000000
--- a/board/delta/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x83008000
diff --git a/board/delta/delta.c b/board/delta/delta.c
deleted file mode 100644
index 32e6307f91..0000000000
--- a/board/delta/delta.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <da9030.h>
-#include <malloc.h>
-#include <command.h>
-#include <asm/arch/pxa-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static void init_DA9030(void);
-static void keys_init(void);
-static void get_pressed_keys(uchar *s);
-static uchar *key_match(uchar *kbd_data);
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of Lubbock-Board mk@tbd: fix this! */
-	gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef DELTA_CHECK_KEYBD
-	uchar kbd_data[KEYBD_DATALEN];
-	char keybd_env[2 * KEYBD_DATALEN + 1];
-	char *str;
-	int i;
-#endif /* DELTA_CHECK_KEYBD */
-
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-
-#ifdef DELTA_CHECK_KEYBD
-	keys_init();
-
-	memset(kbd_data, '\0', KEYBD_DATALEN);
-
-	/* check for pressed keys and setup keybd_env */
-	get_pressed_keys(kbd_data);
-
-	for (i = 0; i < KEYBD_DATALEN; ++i) {
-		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
-	}
-	setenv ("keybd", keybd_env);
-
-	str = strdup ((char *)key_match (kbd_data));	/* decode keys */
-
-# ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
-	setenv ("preboot", str);	/* set or delete definition */
-# endif /* CONFIG_PREBOOT */
-	if (str != NULL) {
-		free (str);
-	}
-#endif /* DELTA_CHECK_KEYBD */
-
-	init_DA9030();
-	return 0;
-}
-
-
-/*
- * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
- */
-#ifdef DELTA_CHECK_KEYBD
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-/*
- * Get pressed keys
- * s is a buffer of size KEYBD_DATALEN-1
- */
-static void get_pressed_keys(uchar *s)
-{
-	unsigned long val;
-	val = GPLR3;
-
-	if(val & (1<<31))
-		*s++ = KEYBD_KP_DKIN0;
-	if(val & (1<<18))
-		*s++ = KEYBD_KP_DKIN1;
-	if(val & (1<<29))
-		*s++ = KEYBD_KP_DKIN2;
-	if(val & (1<<22))
-		*s++ = KEYBD_KP_DKIN5;
-}
-
-static void keys_init()
-{
-	CKENB |= CKENB_7_GPIO;
-	udelay(100);
-
-	/* Configure GPIOs */
-	GPIO127 = 0xa840;	/* KP_DKIN0 */
-	GPIO114 = 0xa840;	/* KP_DKIN1 */
-	GPIO125 = 0xa840;	/* KP_DKIN2 */
-	GPIO118 = 0xa840;	/* KP_DKIN5 */
-
-	/* Configure GPIOs as inputs */
-	GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
-	GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
-
-	udelay(100);
-}
-
-static int compare_magic (uchar *kbd_data, uchar *str)
-{
-	/* uchar compare[KEYBD_DATALEN-1]; */
-	uchar compare[KEYBD_DATALEN];
-	char *nxt;
-	int i;
-
-	/* Don't include modifier byte */
-	/* memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); */
-	memcpy (compare, kbd_data, KEYBD_DATALEN);
-
-	for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
-		uchar c;
-		int k;
-
-		c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
-
-		if (str == (uchar *)nxt) {	/* invalid character */
-			break;
-		}
-
-		/*
-		 * Check if this key matches the input.
-		 * Set matches to zero, so they match only once
-		 * and we can find duplicates or extra keys
-		 */
-		for (k = 0; k < sizeof(compare); ++k) {
-			if (compare[k] == '\0')	/* only non-zero entries */
-				continue;
-			if (c == compare[k]) {	/* found matching key */
-				compare[k] = '\0';
-				break;
-			}
-		}
-		if (k == sizeof(compare)) {
-			return -1;		/* unmatched key */
-		}
-	}
-
-	/*
-	 * A full match leaves no keys in the `compare' array,
-	 */
-	for (i = 0; i < sizeof(compare); ++i) {
-		if (compare[i])
-		{
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-
-static uchar *key_match (uchar *kbd_data)
-{
-	char magic[sizeof (kbd_magic_prefix) + 1];
-	uchar *suffix;
-	char *kbd_magic_keys;
-
-	/*
-	 * The following string defines the characters that can pe appended
-	 * to "key_magic" to form the names of environment variables that
-	 * hold "magic" key codes, i. e. such key codes that can cause
-	 * pre-boot actions. If the string is empty (""), then only
-	 * "key_magic" is checked (old behaviour); the string "125" causes
-	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
-	 */
-	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
-		kbd_magic_keys = "";
-
-	/* loop over all magic keys;
-	 * use '\0' suffix in case of empty string
-	 */
-	for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
-		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-		if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
-			char cmd_name[sizeof (kbd_command_prefix) + 1];
-			char *cmd;
-
-			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-
-			cmd = getenv (cmd_name);
-			*kbd_data = *suffix;
-			return ((uchar *)cmd);
-		}
-	}
-	*kbd_data = '\0';
-	return (NULL);
-}
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	uchar kbd_data[KEYBD_DATALEN];
-	char keybd_env[2 * KEYBD_DATALEN + 1];
-	int i;
-
-	/* Read keys */
-	get_pressed_keys(kbd_data);
-	puts ("Keys:");
-	for (i = 0; i < KEYBD_DATALEN; ++i) {
-		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
-		printf (" %02x", kbd_data[i]);
-	}
-	putc ('\n');
-	setenv ("keybd", keybd_env);
-	return 0;
-}
-
-U_BOOT_CMD(
-	   kbd,	1,	1,	do_kbd,
-	   "kbd     - read keyboard status\n",
-	   NULL
-);
-
-#endif /* DELTA_CHECK_KEYBD */
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
-	return 0;
-}
-
-void i2c_init_board()
-{
-	CKENB |= (CKENB_4_I2C);
-
-	/* setup I2C GPIO's */
-	GPIO32 = 0x801;		/* SCL = Alt. Fkt. 1 */
-	GPIO33 = 0x801;		/* SDA = Alt. Fkt. 1 */
-}
-
-/* initialize the DA9030 Power Controller */
-static void init_DA9030()
-{
-	uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
-
-	CKENB |= CKENB_7_GPIO;
-	udelay(100);
-
-	/* Rising Edge on EXTON to reset DA9030 */
-	GPIO17 = 0x8800;	/* configure GPIO17, no pullup, -down */
-	GPDR0 |= (1<<17);	/* GPIO17 is output */
-	GSDR0 = (1<<17);
-	GPCR0 = (1<<17);	/* drive GPIO17 low */
-	GPSR0 = (1<<17);	/* drive GPIO17 high */
-
-#if CFG_DA9030_EXTON_DELAY
-	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
-#endif
-	GPCR0 = (1<<17);	/* drive GPIO17 low */
-
-	/* reset the watchdog and go active (0xec) */
-	val = (SYS_CONTROL_A_HWRES_ENABLE |
-	       (0x6<<4) |
-	       SYS_CONTROL_A_WDOG_ACTION |
-	       SYS_CONTROL_A_WATCHDOG);
-	if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
-		printf("Error accessing DA9030 via i2c.\n");
-		return;
-	}
-
-	i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
-	i2c_reg_write(addr, LDO2_3, 0xd1);	/* LDO2 =1,9V, LDO3=3,1V */
-	i2c_reg_write(addr, LDO4_5, 0xcc);	/* LDO2 =1,9V, LDO3=3,1V */
-	i2c_reg_write(addr, LDO6_SIMCP, 0x3e);	/* LDO6=3,2V, SIMCP = 5V support */
-	i2c_reg_write(addr, LDO7_8, 0xc9);	/* LDO7=2,7V, LDO8=3,0V */
-	i2c_reg_write(addr, LDO9_12, 0xec);	/* LDO9=3,0V, LDO12=3,2V */
-	i2c_reg_write(addr, BUCK, 0x0c);	/* Buck=1.2V */
-	i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
-	i2c_reg_write(addr, LDO_10_11, 0xcc);	/* LDO10=3.0V  LDO11=3.0V */
-	i2c_reg_write(addr, LDO_15, 0xae);	/* LDO15=1.8V, dislock first 3bit */
-	i2c_reg_write(addr, LDO_14_16, 0x05);	/* LDO14=2.8V, LDO16=NB */
-	i2c_reg_write(addr, LDO_18_19, 0x9c);	/* LDO18=3.0V, LDO19=2.7V */
-	i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
-	i2c_reg_write(addr, BUCK2_DVC1, 0x9a);	/* Buck2=1.5V plus Update support of 520 MHz */
-	i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
-	i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
-	i2c_reg_write(addr, USBPUMP, 0xc1);	/* start pump, ignore HW signals */
-
-	val = i2c_reg_read(addr, STATUS);
-	if(val & STATUS_CHDET)
-		printf("Charger detected, turning on LED.\n");
-	else {
-		printf("No charger detetected.\n");
-		/* undervoltage? print error and power down */
-	}
-}
-
-
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
deleted file mode 100644
index f059db5059..0000000000
--- a/board/delta/lowlevel_init.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
-
-.macro wait time
-	ldr		r2, =OSCR
-	mov		r3, #0
-	str		r3, [r2]
-0:
-	ldr		r3, [r2]
-	cmp		r3, \time
-	bls		0b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Set up GPIO pins first */
-	mov	 r10, lr
-
-	/*  Configure GPIO  Pins 97, 98 UART1 / altern. Fkt. 1 */
-	ldr		r0, =GPIO97
-	ldr		r1, =0x801
-	str		r1, [r0]
-
-	ldr		r0, =GPIO98
-	ldr		r1, =0x801
-	str		r1, [r0]
-
-	/* tebrandt - ASCR, clear the RDH bit */
-	ldr		r0, =ASCR
-	ldr		r1, [r0]
-	bic		r1, r1, #0x80000000
-	str		r1, [r0]
-
-mem_init:
-	/* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */
-	ldr		r0, =ACCR
-	ldr		r1, [r0]
-	orr		r1, r1, #0x3000
-	str		r1, [r0]
-	ldr		r1, [r0]
-
-	/* 2. Programm MDCNFG, leaving DMCEN de-asserted */
-	ldr		r0, =MDCNFG
-	ldr		r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13)
-	/* ldr		r1, =0x80000403 */
-	str		r1, [r0]
-	ldr		r1, [r0]	/* delay until written */
-
-	/* 3. wait nop power up waiting period (200ms)
-	 * optimization: Steps 4+6 can be done during this
-	 */
-	wait #300
-
-	/* 4. Perform an initial Rcomp-calibration cycle */
-	ldr		r0, =RCOMP
-	ldr		r1, =0x80000000
-	str		r1, [r0]
-	ldr		r1, [r0]	/* delay until written */
-	/* missing: program for automatic rcomp evaluation cycles */
-
-	/* 5. DDR DRAM strobe delay calibration */
-	ldr		r0, =DDR_HCAL
-	ldr		r1, =0x88000007
-	str		r1, [r0]
-	wait		#5
-	ldr		r1, [r0]	/* delay until written */
-
-	/* Set MDMRS */
-	ldr		r0, =MDMRS
-	ldr		r1, =0x60000033
-	str		r1, [r0]
-	wait	#300
-
-	/* Configure MDREFR */
-	ldr		r0, =MDREFR
-	ldr		r1, =0x00000006
-	str		r1, [r0]
-	ldr		r1, [r0]
-
-	/* Enable the dynamic memory controller */
-	ldr		r0, =MDCNFG
-	ldr		r1, [r0]
-	orr		r1, r1, #MDCNFG_DMCEN
-	str		r1, [r0]
-
-#ifndef CFG_SKIP_DRAM_SCRUB
-	/* scrub/init SDRAM if enabled/present */
-	ldr	r8, =CFG_DRAM_BASE	/* base address of SDRAM (CFG_DRAM_BASE) */
-	ldr	r9, =CFG_DRAM_SIZE	/* size of memory to scrub (CFG_DRAM_SIZE) */
-	mov	r0, #0			/* scrub with 0x0000:0000 */
-	mov	r1, #0
-	mov	r2, #0
-	mov	r3, #0
-	mov	r4, #0
-	mov	r5, #0
-	mov	r6, #0
-	mov	r7, #0
-10:	/* fastScrubLoop */
-	subs	r9, r9, #32	/* 8 words/line */
-	stmia	r8!, {r0-r7}
-	beq	15f
-	b	10b
-#endif /* CFG_SKIP_DRAM_SCRUB */
-
-15:
-	/* Mask all interrupts */
-	mov	r1, #0
-	mcr	p6, 0, r1, c1, c0, 0	@ ICMR
-
-	/* Disable software and data breakpoints */
-	mov	r0, #0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/* Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-
-endlowlevel_init:
-	mov	pc, lr
diff --git a/board/delta/nand.c b/board/delta/nand.c
deleted file mode 100644
index eab2793251..0000000000
--- a/board/delta/nand.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#if !defined(CFG_NAND_LEGACY)
-
-#include <nand.h>
-#include <asm/arch/pxa-regs.h>
-
-#ifdef CFG_DFC_DEBUG1
-# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG1(fmt, args...)
-#endif
-
-#ifdef CFG_DFC_DEBUG2
-# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG2(fmt, args...)
-#endif
-
-#ifdef CFG_DFC_DEBUG3
-# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG3(fmt, args...)
-#endif
-
-#define MIN(x, y)		((x < y) ? x : y)
-
-/* These really don't belong here, as they are specific to the NAND Model */
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr delta_bbt_descr = {
-	.options = 0,
-	.offs = 0,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_oobinfo delta_oob = {
-	.useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
-	.eccbytes = 6,
-	.eccpos = {2, 3, 4, 5, 6, 7},
-	.oobfree = { {8, 2}, {12, 4} }
-};
-
-
-/*
- * not required for Monahans DFC
- */
-static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
-{
-	return;
-}
-
-
-/*
- * Write buf to the DFC Controller Data Buffer
- */
-static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	unsigned long bytes_multi = len & 0xfffffffc;
-	unsigned long rest = len & 0x3;
-	unsigned long *long_buf;
-	int i;
-
-	DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
-	if(bytes_multi) {
-		for(i=0; i<bytes_multi; i+=4) {
-			long_buf = (unsigned long*) &buf[i];
-			NDDB = *long_buf;
-		}
-	}
-	if(rest) {
-		printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n");
-	}
-	return;
-}
-
-
-/*
- * These functions are quite problematic for the DFC. Luckily they are
- * not used in the current nand code, except for nand_command, which
- * we've defined our own anyway. The problem is, that we always need
- * to write 4 bytes to the DFC Data Buffer, but in these functions we
- * don't know if to buffer the bytes/half words until we've gathered 4
- * bytes or if to send them straight away.
- *
- * Solution: Don't use these with Mona's DFC and complain loudly.
- */
-static void dfc_write_word(struct mtd_info *mtd, u16 word)
-{
-	printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n");
-}
-static void dfc_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
-}
-
-/* The original:
- * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
- *
- * Shouldn't this be "u_char * const buf" ?
- */
-static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
-{
-	int i=0, j;
-
-	/* we have to be carefull not to overflow the buffer if len is
-	 * not a multiple of 4 */
-	unsigned long bytes_multi = len & 0xfffffffc;
-	unsigned long rest = len & 0x3;
-	unsigned long *long_buf;
-
-	DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len);
-	/* if there are any, first copy multiple of 4 bytes */
-	if(bytes_multi) {
-		for(i=0; i<bytes_multi; i+=4) {
-			long_buf = (unsigned long*) &buf[i];
-			*long_buf = NDDB;
-		}
-	}
-
-	/* ...then the rest */
-	if(rest) {
-		unsigned long rest_data = NDDB;
-		for(j=0;j<rest; j++)
-			buf[i+j] = (u_char) ((rest_data>>j) & 0xff);
-	}
-
-	return;
-}
-
-/*
- * read a word. Not implemented as not used in NAND code.
- */
-static u16 dfc_read_word(struct mtd_info *mtd)
-{
-	printf("dfc_write_byte: UNIMPLEMENTED.\n");
-	return 0;
-}
-
-/* global var, too bad: mk@tbd: move to ->priv pointer */
-static unsigned long read_buf = 0;
-static int bytes_read = -1;
-
-/*
- * read a byte from NDDB Because we can only read 4 bytes from NDDB at
- * a time, we buffer the remaining bytes. The buffer is reset when a
- * new command is sent to the chip.
- *
- * WARNING:
- * This function is currently only used to read status and id
- * bytes. For these commands always 8 bytes need to be read from
- * NDDB. So we read and discard these bytes right now. In case this
- * function is used for anything else in the future, we must check
- * what was the last command issued and read the appropriate amount of
- * bytes respectively.
- */
-static u_char dfc_read_byte(struct mtd_info *mtd)
-{
-	unsigned char byte;
-	unsigned long dummy;
-
-	if(bytes_read < 0) {
-		read_buf = NDDB;
-		dummy = NDDB;
-		bytes_read = 0;
-	}
-	byte = (unsigned char) (read_buf>>(8 * bytes_read++));
-	if(bytes_read >= 4)
-		bytes_read = -1;
-
-	DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
-	return byte;
-}
-
-/* calculate delta between OSCR values start and now  */
-static unsigned long get_delta(unsigned long start)
-{
-	unsigned long cur = OSCR;
-
-	if(cur < start) /* OSCR overflowed */
-		return (cur + (start^0xffffffff));
-	else
-		return (cur - start);
-}
-
-/* delay function, this doesn't belong here */
-static void wait_us(unsigned long us)
-{
-	unsigned long start = OSCR;
-	us *= OSCR_CLK_FREQ;
-
-	while (get_delta(start) < us) {
-		/* do nothing */
-	}
-}
-
-static void dfc_clear_nddb(void)
-{
-	NDCR &= ~NDCR_ND_RUN;
-	wait_us(CFG_NAND_OTHER_TO);
-}
-
-/* wait_event with timeout */
-static unsigned long dfc_wait_event(unsigned long event)
-{
-	unsigned long ndsr, timeout, start = OSCR;
-
-	if(!event)
-		return 0xff000000;
-	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
-		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
-	else
-		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
-
-	while(1) {
-		ndsr = NDSR;
-		if(ndsr & event) {
-			NDSR |= event;
-			break;
-		}
-		if(get_delta(start) > timeout) {
-			DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
-			return 0xff000000;
-		}
-
-	}
-	return ndsr;
-}
-
-/* we don't always wan't to do this */
-static void dfc_new_cmd(void)
-{
-	int retry = 0;
-	unsigned long status;
-
-	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
-		/* Clear NDSR */
-		NDSR = 0xFFF;
-
-		/* set NDCR[NDRUN] */
-		if(!(NDCR & NDCR_ND_RUN))
-			NDCR |= NDCR_ND_RUN;
-
-		status = dfc_wait_event(NDSR_WRCMDREQ);
-
-		if(status & NDSR_WRCMDREQ)
-			return;
-
-		DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
-		dfc_clear_nddb();
-	}
-	DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry);
-}
-
-/* this function is called after Programm and Erase Operations to
- * check for success or failure */
-static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
-{
-	unsigned long ndsr=0, event=0;
-
-	if(state == FL_WRITING) {
-		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
-	} else if(state == FL_ERASING) {
-		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
-	}
-
-	ndsr = dfc_wait_event(event);
-
-	if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
-		return(0x1); /* Status Read error */
-	return 0;
-}
-
-/* cmdfunc send commands to the DFC */
-static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
-			int column, int page_addr)
-{
-	/* register struct nand_chip *this = mtd->priv; */
-	unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;
-
-	/* clear the ugly byte read buffer */
-	bytes_read = -1;
-	read_buf = 0;
-
-	switch (command) {
-	case NAND_CMD_READ0:
-		DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
-		dfc_new_cmd();
-		ndcb0 = (NAND_CMD_READ0 | (4<<16));
-		column >>= 1; /* adjust for 16 bit bus */
-		ndcb1 = (((column>>1) & 0xff) |
-			 ((page_addr<<8) & 0xff00) |
-			 ((page_addr<<8) & 0xff0000) |
-			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
-		event = NDSR_RDDREQ;
-		goto write_cmd;
-	case NAND_CMD_READ1:
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
-		goto end;
-	case NAND_CMD_READOOB:
-		DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
-		goto end;
-	case NAND_CMD_READID:
-		dfc_new_cmd();
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n");
-		ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
-		event = NDSR_RDDREQ;
-		goto write_cmd;
-	case NAND_CMD_PAGEPROG:
-		/* sent as a multicommand in NAND_CMD_SEQIN */
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
-		goto end;
-	case NAND_CMD_ERASE1:
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
-		dfc_new_cmd();
-		ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
-		ndcb1 = (page_addr & 0x00ffffff);
-		goto write_cmd;
-	case NAND_CMD_ERASE2:
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
-		goto end;
-	case NAND_CMD_SEQIN:
-		/* send PAGE_PROG command(0x1080) */
-		dfc_new_cmd();
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
-		ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
-		column >>= 1; /* adjust for 16 bit bus */
-		ndcb1 = (((column>>1) & 0xff) |
-			 ((page_addr<<8) & 0xff00) |
-			 ((page_addr<<8) & 0xff0000) |
-			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
-		event = NDSR_WRDREQ;
-		goto write_cmd;
-	case NAND_CMD_STATUS:
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n");
-		dfc_new_cmd();
-		ndcb0 = NAND_CMD_STATUS | (4<<21);
-		event = NDSR_RDDREQ;
-		goto write_cmd;
-	case NAND_CMD_RESET:
-		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n");
-		ndcb0 = NAND_CMD_RESET | (5<<21);
-		event = NDSR_CS0_CMDD;
-		goto write_cmd;
-	default:
-		printk("dfc_cmdfunc: error, unsupported command.\n");
-		goto end;
-	}
-
- write_cmd:
-	NDCB0 = ndcb0;
-	NDCB0 = ndcb1;
-	NDCB0 = ndcb2;
-
-	/*  wait_event: */
-	dfc_wait_event(event);
- end:
-	return;
-}
-
-static void dfc_gpio_init(void)
-{
-	DFC_DEBUG2("Setting up DFC GPIO's.\n");
-
-	/* no idea what is done here, see zylonite.c */
-	GPIO4 = 0x1;
-
-	DF_ALE_WE1 = 0x00000001;
-	DF_ALE_WE2 = 0x00000001;
-	DF_nCS0 = 0x00000001;
-	DF_nCS1 = 0x00000001;
-	DF_nWE = 0x00000001;
-	DF_nRE = 0x00000001;
-	DF_IO0 = 0x00000001;
-	DF_IO8 = 0x00000001;
-	DF_IO1 = 0x00000001;
-	DF_IO9 = 0x00000001;
-	DF_IO2 = 0x00000001;
-	DF_IO10 = 0x00000001;
-	DF_IO3 = 0x00000001;
-	DF_IO11 = 0x00000001;
-	DF_IO4 = 0x00000001;
-	DF_IO12 = 0x00000001;
-	DF_IO5 = 0x00000001;
-	DF_IO13 = 0x00000001;
-	DF_IO6 = 0x00000001;
-	DF_IO14 = 0x00000001;
-	DF_IO7 = 0x00000001;
-	DF_IO15 = 0x00000001;
-
-	DF_nWE = 0x1901;
-	DF_nRE = 0x1901;
-	DF_CLE_NOE = 0x1900;
-	DF_ALE_WE1 = 0x1901;
-	DF_INT_RnB = 0x1900;
-}
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand_new.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for  accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
- *   only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- *   read regs (tR)
- * - options: various chip options. They can partly be set to inform
- *   nand_scan about special functionality. See the defines for further
- *   explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
-	unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
-
-	/* set up GPIO Control Registers */
-	dfc_gpio_init();
-
-	/* turn on the NAND Controller Clock (104 MHz @ D0) */
-	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
-
-#undef CFG_TIMING_TIGHT
-#ifndef CFG_TIMING_TIGHT
-	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tCH);
-	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tCS);
-	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tWH);
-	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tWP);
-	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tRH);
-	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tRP);
-	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1),
-		 DFC_MAX_tR);
-	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1),
-		   DFC_MAX_tWHR);
-	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
-		  DFC_MAX_tAR);
-#else /* this is the tight timing */
-
-	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)),
-		  DFC_MAX_tCH);
-	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)),
-		  DFC_MAX_tCS);
-	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)),
-		  DFC_MAX_tWH);
-	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)),
-		  DFC_MAX_tWP);
-	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)),
-		  DFC_MAX_tRH);
-	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)),
-		  DFC_MAX_tRP);
-	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2),
-		 DFC_MAX_tR);
-	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2),
-		   DFC_MAX_tWHR);
-	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
-		  DFC_MAX_tAR);
-#endif /* CFG_TIMING_TIGHT */
-
-
-	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
-
-	/* tRP value is split in the register */
-	if(tRP & (1 << 4)) {
-		tRP_high = 1;
-		tRP &= ~(1 << 4);
-	} else {
-		tRP_high = 0;
-	}
-
-	NDTR0CS0 = (tCH << 19) |
-		(tCS << 16) |
-		(tWH << 11) |
-		(tWP << 8) |
-		(tRP_high << 6) |
-		(tRH << 3) |
-		(tRP << 0);
-
-	NDTR1CS0 = (tR << 16) |
-		(tWHR << 4) |
-		(tAR << 0);
-
-	/* If it doesn't work (unlikely) think about:
-	 *  - ecc enable
-	 *  - chip select don't care
-	 *  - read id byte count
-	 *
-	 * Intentionally enabled by not setting bits:
-	 *  - dma (DMA_EN)
-	 *  - page size = 512
-	 *  - cs don't care, see if we can enable later!
-	 *  - row address start position (after second cycle)
-	 *  - pages per block = 32
-	 *  - ND_RDY : clears command buffer
-	 */
-	/* NDCR_NCSX |		/\* Chip select busy don't care *\/ */
-
-	NDCR = (NDCR_SPARE_EN |		/* use the spare area */
-		NDCR_DWIDTH_C |		/* 16bit DFC data bus width  */
-		NDCR_DWIDTH_M |		/* 16 bit Flash device data bus width */
-		(2 << 16) |		/* read id count = 7 ???? mk@tbd */
-		NDCR_ND_ARB_EN |	/* enable bus arbiter */
-		NDCR_RDYM |		/* flash device ready ir masked */
-		NDCR_CS0_PAGEDM |	/* ND_nCSx page done ir masked */
-		NDCR_CS1_PAGEDM |
-		NDCR_CS0_CMDDM |	/* ND_CSx command done ir masked */
-		NDCR_CS1_CMDDM |
-		NDCR_CS0_BBDM |		/* ND_CSx bad block detect ir masked */
-		NDCR_CS1_BBDM |
-		NDCR_DBERRM |		/* double bit error ir masked */
-		NDCR_SBERRM |		/* single bit error ir masked */
-		NDCR_WRDREQM |		/* write data request ir masked */
-		NDCR_RDDREQM |		/* read data request ir masked */
-		NDCR_WRCMDREQM);	/* write command request ir masked */
-
-
-	/* wait 10 us due to cmd buffer clear reset */
-	/*	wait(10); */
-
-
-	nand->hwcontrol = dfc_hwcontrol;
-/*	nand->dev_ready = dfc_device_ready; */
-	nand->eccmode = NAND_ECC_SOFT;
-	nand->options = NAND_BUSWIDTH_16;
-	nand->waitfunc = dfc_wait;
-	nand->read_byte = dfc_read_byte;
-	nand->write_byte = dfc_write_byte;
-	nand->read_word = dfc_read_word;
-	nand->write_word = dfc_write_word;
-	nand->read_buf = dfc_read_buf;
-	nand->write_buf = dfc_write_buf;
-
-	nand->cmdfunc = dfc_cmdfunc;
-	nand->autooob = &delta_oob;
-	nand->badblock_pattern = &delta_bbt_descr;
-	return 0;
-}
-
-#else
- #error "U-Boot legacy NAND support not available for Monahans DFC."
-#endif
-#endif
diff --git a/board/delta/u-boot.lds b/board/delta/u-boot.lds
deleted file mode 100644
index f0102391b3..0000000000
--- a/board/delta/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/pxa/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/eXalion/Makefile b/board/eXalion/Makefile
deleted file mode 100644
index 98601a3f36..0000000000
--- a/board/eXalion/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/eXalion/config.mk b/board/eXalion/config.mk
deleted file mode 100644
index b3f65ebe58..0000000000
--- a/board/eXalion/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Sandpoint boards
-#
-
-#TEXT_BASE = 0x00090000
-TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/eXalion/eXalion.c b/board/eXalion/eXalion.c
deleted file mode 100644
index 2e3f51998e..0000000000
--- a/board/eXalion/eXalion.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <ide.h>
-#include "piix_pci.h"
-#include "eXalion.h"
-
-int checkboard (void)
-{
-	ulong busfreq = get_bus_freq (0);
-	char buf[32];
-
-	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", __DATE__, __TIME__);
-	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
-
-	return 0;
-}
-
-int checkflash (void)
-{
-	printf ("checkflash\n");
-	flash_init ();
-	return (0);
-}
-
-long int initdram (int board_type)
-{
-	int i, cnt;
-	volatile uchar *base = CFG_SDRAM_BASE;
-	volatile ulong *addr;
-	ulong save[32];
-	ulong val, ret = 0;
-
-	for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
-	     cnt >>= 1) {
-		addr = (volatile ulong *) base + cnt;
-		save[i++] = *addr;
-		*addr = ~cnt;
-	}
-
-	addr = (volatile ulong *) base;
-	save[i] = *addr;
-	*addr = 0;
-
-	if (*addr != 0) {
-		*addr = save[i];
-		goto Done;
-	}
-
-	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
-		addr = (volatile ulong *) base + cnt;
-		val = *addr;
-		*addr = save[--i];
-		if (val != ~cnt) {
-			ulong new_bank0_end = cnt * sizeof (long) - 1;
-			ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
-			ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
-
-			mear1 = (mear1 & 0xFFFFFF00) |
-				((new_bank0_end & MICR_ADDR_MASK) >>
-				 MICR_ADDR_SHIFT);
-			emear1 = (emear1 & 0xFFFFFF00) |
-				((new_bank0_end & MICR_ADDR_MASK) >>
-				 MICR_EADDR_SHIFT);
-			mpc824x_mpc107_setreg (MEAR1, mear1);
-			mpc824x_mpc107_setreg (EMEAR1, emear1);
-
-			ret = cnt * sizeof (long);
-			goto Done;
-		}
-	}
-
-	ret = CFG_MAX_RAM_SIZE;
-      Done:
-	return ret;
-}
-
-int misc_init_r (void)
-{
-	pci_dev_t bdf;
-	u32 val32;
-	u8 val8;
-
-	puts ("ISA:   ");
-	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
-	if (bdf == -1) {
-		puts ("Unable to find PIIX4 ISA bridge !\n");
-		hang ();
-	}
-
-	/* set device for normal ISA instead EIO */
-	pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
-	val32 |= 0x00000001;
-	pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
-	printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
-		PCI_DEV (bdf), PCI_FUNC (bdf));
-
-	puts ("ISA:   ");
-	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
-	if (bdf == -1) {
-		puts ("Unable to find PIIX4 IDE controller !\n");
-		hang ();
-	}
-
-	/* Init BMIBA register  */
-	/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
-	/* val32 |= 0x1000; */
-	/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */
-
-	/* Enable BUS master and IO access  */
-	val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
-	pci_write_config_dword (bdf, PCI_COMMAND, val32);
-
-	/* Set latency  */
-	pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
-	val8 = 0x40;
-	pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);
-
-	/* Enable Primary ATA/IDE  */
-	pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
-	/* val32 = 0xa307a307; */
-	val32 = 0x00008000;
-	pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);
-
-
-	printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
-		PCI_DEV (bdf), PCI_FUNC (bdf));
-
-	/* Try to get FAT working... */
-	/* fat_register_read(ide_read); */
-
-
-	return (0);
-}
-
-/*
- * Show/Init PCI devices on the specified bus number.
- */
-
-void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned char line;
-
-	switch (PCI_DEV (dev)) {
-	case 16:
-		line = PCI_INT_A;
-		break;
-	case 17:
-		line = PCI_INT_B;
-		break;
-	case 18:
-		line = PCI_INT_C;
-		break;
-	case 19:
-		line = PCI_INT_D;
-		break;
-#if defined (CONFIG_MPC8245)
-	case 20:
-		line = PCI_INT_A;
-		break;
-	case 21:
-		line = PCI_INT_B;
-		break;
-	case 22:
-		line = PCI_INT_NA;
-		break;
-#endif
-	default:
-		line = PCI_INT_A;
-		break;
-	}
-	pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-#if defined (CONFIG_MPC8240)
-static struct pci_config_table pci_eXalion_config_table[] = {
-	{
-	 /* Intel 82559ER ethernet controller */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{
-	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
-	 pci_cfgfunc_config_device, {0,
-				     0,
-				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
-	{
-	 /* Intel 82371AB PIIX4 IDE controller */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
-	 pci_cfgfunc_config_device, {0,
-				     0,
-				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
-	{}
-};
-#elif defined (CONFIG_MPC8245)
-static struct pci_config_table pci_eXalion_config_table[] = {
-	{
-	 /* Intel 82559ER ethernet controller */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{
-	 /* Intel 82559ER ethernet controller */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
-	 pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
-				     PCI_ENET1_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{
-	 /* Broadcom BCM5690 Gigabit switch */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
-	 pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
-				     PCI_ENET2_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{
-	 /* Broadcom BCM5690 Gigabit switch */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
-	 pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
-				     PCI_ENET3_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{
-	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
-	 pci_cfgfunc_config_device, {0,
-				     0,
-				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
-	{
-	 /* Intel 82371AB PIIX4 IDE controller */
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
-	 pci_cfgfunc_config_device, {0,
-				     0,
-				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
-	{}
-};
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-#endif /* #ifndef CONFIG_PCI_PNP */
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_eXalion_config_table,
-	fixup_irq:pci_eXalion_fixup_irq,
-#endif
-};
-
-void pci_init_board (void)
-{
-	pci_mpc824x_init (&hose);
-}
diff --git a/board/eXalion/eXalion.h b/board/eXalion/eXalion.h
deleted file mode 100644
index 8dccabb71e..0000000000
--- a/board/eXalion/eXalion.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * James Dougherty (jfd@broadcom.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __EXALION_H
-#define __EXALION_H
-
-/* IRQ settings */
-#define  PCI_INT_NA (0xff)   /* PCI Intr. not used */
-#define  PCI_INT_A  (0x09)   /* PCI Intr. A Interrupt Request Line Nr. */
-#define  PCI_INT_B  (0x0a)   /* PCI Intr. B Interrupt Request Line Nr. */
-#define  PCI_INT_C  (0x0b)   /* PCI Intr. C Interrupt Request Line Nr. */
-#define  PCI_INT_D  (0x0c)   /* PCI Intr. D Interrupt Request Line Nr. */
-#if defined (CPU_MPC8245)
-#define  LN_1_INT     PCI_INT_B  /* ethernet interrupt level */
-#define  LN_2_INT     PCI_INT_C  /* ethernet interrupt level */
-#define  BCM_1_INT    PCI_INT_A  /* BCM5690 interrupt level */
-#define  BCM_2_INT    PCI_INT_B  /* BCM5690 interrupt level */
-#elif defined (CPU_MPC8240)
-#define  BCM_INT      PCI_INT_B  /* BCM5600 interrupt level */
-#define  LN_INT       PCI_INT_C  /* ethernet interrupt level */
-#endif
-
-#ifndef __ASSEMBLY__
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __EXALION_H */
diff --git a/board/eXalion/piix_pci.h b/board/eXalion/piix_pci.h
deleted file mode 100644
index b3c9c16cc8..0000000000
--- a/board/eXalion/piix_pci.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _PIIX4_PCI_H
-#define _PIIX4_PCI_H
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#define PIIX4_VENDOR_ID         0x8086
-#define PIIX4_ISA_DEV_ID        0x7110
-#define PIIX4_IDE_DEV_ID        0x7111
-
-/* Function 0 ISA Bridge */
-#define PCI_CFG_PIIX4_IORT      0x4C    /* 8 bit ISA Recovery Timer Reg (default 0x4D) */
-#define PCI_CFG_PIIX4_XBCS      0x4E    /* 16 bit XBus Chip select reg (default 0x0003) */
-#define PCI_CFG_PIIX4_PIRQC     0x60    /* PCI IRQ Route Register 4 x 8bit (default )*/
-#define PCI_CFG_PIIX4_SERIRQ    0x64
-#define PCI_CFG_PIIX4_TOM       0x69
-#define PCI_CFG_PIIX4_MSTAT     0x6A
-#define PCI_CFG_PIIX4_MBDMA     0x76
-#define PCI_CFG_PIIX4_APICBS    0x80
-#define PCI_CFG_PIIX4_DLC       0x82
-#define PCI_CFG_PIIX4_PDMACFG   0x90
-#define PCI_CFG_PIIX4_DDMABS    0x92
-#define PCI_CFG_PIIX4_GENCFG    0xB0
-#define PCI_CFG_PIIX4_RTCCFG    0xCB
-
-/* IO Addresses */
-#define PIIX4_ISA_DMA1_CH0BA    0x00
-#define PIIX4_ISA_DMA1_CH0CA    0x01
-#define PIIX4_ISA_DMA1_CH1BA    0x02
-#define PIIX4_ISA_DMA1_CH1CA    0x03
-#define PIIX4_ISA_DMA1_CH2BA    0x04
-#define PIIX4_ISA_DMA1_CH2CA    0x05
-#define PIIX4_ISA_DMA1_CH3BA    0x06
-#define PIIX4_ISA_DMA1_CH3CA    0x07
-#define PIIX4_ISA_DMA1_CMDST    0x08
-#define PIIX4_ISA_DMA1_REQ      0x09
-#define PIIX4_ISA_DMA1_WSBM     0x0A
-#define PIIX4_ISA_DMA1_CH_MOD   0x0B
-#define PIIX4_ISA_DMA1_CLR_PT   0x0C
-#define PIIX4_ISA_DMA1_M_CLR    0x0D
-#define PIIX4_ISA_DMA1_CLR_M    0x0E
-#define PIIX4_ISA_DMA1_RWAMB    0x0F
-
-#define PIIX4_ISA_DMA2_CH0BA    0xC0
-#define PIIX4_ISA_DMA2_CH0CA    0xC1
-#define PIIX4_ISA_DMA2_CH1BA    0xC2
-#define PIIX4_ISA_DMA2_CH1CA    0xC3
-#define PIIX4_ISA_DMA2_CH2BA    0xC4
-#define PIIX4_ISA_DMA2_CH2CA    0xC5
-#define PIIX4_ISA_DMA2_CH3BA    0xC6
-#define PIIX4_ISA_DMA2_CH3CA    0xC7
-#define PIIX4_ISA_DMA2_CMDST    0xD0
-#define PIIX4_ISA_DMA2_REQ      0xD2
-#define PIIX4_ISA_DMA2_WSBM     0xD4
-#define PIIX4_ISA_DMA2_CH_MOD   0xD6
-#define PIIX4_ISA_DMA2_CLR_PT   0xD8
-#define PIIX4_ISA_DMA2_M_CLR    0xDA
-#define PIIX4_ISA_DMA2_CLR_M    0xDC
-#define PIIX4_ISA_DMA2_RWAMB    0xDE
-
-#define PIIX4_ISA_INT1_ICW1     0x20
-#define PIIX4_ISA_INT1_OCW2     0x20
-#define PIIX4_ISA_INT1_OCW3     0x20
-#define PIIX4_ISA_INT1_ICW2     0x21
-#define PIIX4_ISA_INT1_ICW3     0x21
-#define PIIX4_ISA_INT1_ICW4     0x21
-#define PIIX4_ISA_INT1_OCW1     0x21
-
-#define PIIX4_ISA_INT1_ELCR     0x4D0
-
-#define PIIX4_ISA_INT2_ICW1     0xA0
-#define PIIX4_ISA_INT2_OCW2     0xA0
-#define PIIX4_ISA_INT2_OCW3     0xA0
-#define PIIX4_ISA_INT2_ICW2     0xA1
-#define PIIX4_ISA_INT2_ICW3     0xA1
-#define PIIX4_ISA_INT2_ICW4     0xA1
-#define PIIX4_ISA_INT2_OCW1     0xA1
-#define PIIX4_ISA_INT2_IMR      0xA1 /* read only */
-
-#define PIIX4_ISA_INT2_ELCR     0x4D1
-
-#define PIIX4_ISA_TMR0_CNT_ST   0x40
-#define PIIX4_ISA_TMR1_CNT_ST   0x41
-#define PIIX4_ISA_TMR2_CNT_ST   0x42
-#define PIIX4_ISA_TMR_TCW       0x43
-
-#define PIIX4_ISA_RST_XBUS      0x60
-
-#define PIIX4_ISA_NMI_CNT_ST    0x61
-#define PIIX4_ISA_NMI_ENABLE    0x70
-
-#define PIIX4_ISA_RTC_INDEX     0x70
-#define PIIX4_ISA_RTC_DATA      0x71
-#define PIIX4_ISA_RTCEXT_IND    0x70
-#define PIIX4_ISA_RTCEXT_DATA   0x71
-
-#define PIIX4_ISA_DMA1_CH2LPG   0x81
-#define PIIX4_ISA_DMA1_CH3LPG   0x82
-#define PIIX4_ISA_DMA1_CH1LPG   0x83
-#define PIIX4_ISA_DMA1_CH0LPG   0x87
-#define PIIX4_ISA_DMA2_CH2LPG   0x89
-#define PIIX4_ISA_DMA2_CH3LPG   0x8A
-#define PIIX4_ISA_DMA2_CH1LPG   0x8B
-#define PIIX4_ISA_DMA2_LPGRFR   0x8F
-
-#define PIIX4_ISA_PORT_92       0x92
-
-#define PIIX4_ISA_APM_CONTRL    0xB2
-#define PIIX4_ISA_APM_STATUS    0xB3
-
-#define PIIX4_ISA_COCPU_ERROR   0xF0
-
-/* Function 1 IDE Controller */
-#define PCI_CFG_PIIX4_BMIBA     0x20
-#define PCI_CFG_PIIX4_IDETIM    0x40
-#define PCI_CFG_PIIX4_SIDETIM   0x44
-#define PCI_CFG_PIIX4_UDMACTL   0x48
-#define PCI_CFG_PIIX4_UDMATIM   0x4A
-
-/* Function 2 USB Controller */
-#define PCI_CFG_PIIX4_SBRNUM    0x60
-#define PCI_CFG_PIIX4_LEGSUP    0xC0
-
-/* Function 3 Power Management */
-#define PCI_CFG_PIIX4_PMAB      0x40
-#define PCI_CFG_PIIX4_CNTA      0x44
-#define PCI_CFG_PIIX4_CNTB      0x48
-#define PCI_CFG_PIIX4_GPICTL    0x4C
-#define PCI_CFG_PIIX4_DEVRESD   0x50
-#define PCI_CFG_PIIX4_DEVACTA   0x54
-#define PCI_CFG_PIIX4_DEVACTB   0x58
-#define PCI_CFG_PIIX4_DEVRESA   0x5C
-#define PCI_CFG_PIIX4_DEVRESB   0x60
-#define PCI_CFG_PIIX4_DEVRESC   0x64
-#define PCI_CFG_PIIX4_DEVRESE   0x68
-#define PCI_CFG_PIIX4_DEVRESF   0x6C
-#define PCI_CFG_PIIX4_DEVRESG   0x70
-#define PCI_CFG_PIIX4_DEVRESH   0x74
-#define PCI_CFG_PIIX4_DEVRESI   0x78
-#define PCI_CFG_PIIX4_PMMISC    0x80
-#define PCI_CFG_PIIX4_SMBBA     0x90
-
-
-#endif  /* _PIIX4_PCI_H */
diff --git a/board/eXalion/u-boot.lds b/board/eXalion/u-boot.lds
deleted file mode 100644
index eaee3fdefc..0000000000
--- a/board/eXalion/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc824x/start.o		(.text)
-    lib_ppc/board.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-	. = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o (.text)
-
-	*(.text)
-
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile
deleted file mode 100644
index b257739b0f..0000000000
--- a/board/emk/top5200/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/emk/top5200/config.mk b/board/emk/top5200/config.mk
deleted file mode 100644
index 84131fef10..0000000000
--- a/board/emk/top5200/config.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2003
-# Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TOP5200 board, on optional MINI5200 and EVAL5200 boards
-#
-# allowed and functional TEXT_BASE values:
-#
-#   0xff000000		low boot at 0x00000100 (default board setting)
-#   0xfff00000		high boot at 0xfff00100 (board needs modification)
-#	0x00100000		RAM load and test
-#
-
-TEXT_BASE = 0xff000000
-#TEXT_BASE = 0xfff00000
-#TEXT_BASE = 0x00100000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
deleted file mode 100644
index 001d9eb7db..0000000000
--- a/board/emk/top5200/top5200.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-/*****************************************************************************
- * initialize SDRAM/DDRAM controller.
- * TBD: get data from I2C EEPROM
- *****************************************************************************/
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-
-	#define	MODE_EN		0x80000000
-	#define	SOFT_PRE	2
-	#define	SOFT_REF	4
-
-	/* configure SDRAM start/end */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE;
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-#ifdef CFG_DRAM_DDR
-	/* set extended mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
-#endif
-	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF;
-	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE;
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL;
-	/* write default TAP delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
-
-#endif /* CFG_RAMBOOT */
-
-	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
-
-	/* return total ram size */
-	return dramsize;
-}
-
-/*****************************************************************************
- * print board identification
- *****************************************************************************/
-int checkboard (void)
-{
-#if defined (CONFIG_EVAL5200)
-	puts ("Board: EMK TOP5200 on EVAL5200\n");
-#else
-#if defined (CONFIG_LITE5200)
-	puts ("Board: LITE5200\n");
-#else
-#if defined (CONFIG_MINI5200)
-	puts ("Board: EMK TOP5200 on MINI5200\n");
-#else
-	puts ("Board: EMK TOP5200\n");
-#endif
-#endif
-#endif
-	return 0;
-}
-
-/*****************************************************************************
- * prepare for FLASH detection
- *****************************************************************************/
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-}
-
-/*****************************************************************************
- * finalize FLASH setup
- *****************************************************************************/
-void flash_afterinit(uint bank, ulong start, ulong size)
-{
-	if (bank == 0) { /* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START =
-		*(vu_long *)MPC5XXX_CS0_START =	START_REG(start);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP =
-		*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(start, size);
-	}
-}
-
-/*****************************************************************************
- * otherinits after RAM is there and we are relocated to RAM
- * note: though this is an int function, nobody cares for the result!
- *****************************************************************************/
-int misc_init_r (void)
-{
-#if !defined (CONFIG_LITE5200)
-	/* read 'factory' part of EEPROM */
-	extern void read_factory_r (void);
-	read_factory_r ();
-#endif
-	return (0);
-}
-
-/*****************************************************************************
- * initialize the PCI system
- *****************************************************************************/
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-/*****************************************************************************
- * provide the IDE Reset Function
- *****************************************************************************/
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
-	}
-}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/emk/top5200/u-boot.lds b/board/emk/top5200/u-boot.lds
deleted file mode 100644
index f23432ecfa..0000000000
--- a/board/emk/top5200/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
deleted file mode 100644
index 88abd76c5c..0000000000
--- a/board/emk/top860/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/emk/top860/config.mk b/board/emk/top860/config.mk
deleted file mode 100644
index 7b940cb813..0000000000
--- a/board/emk/top860/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TOP860 board
-#
-
-TEXT_BASE = 0x80000000
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
deleted file mode 100644
index 84afaaa2b2..0000000000
--- a/board/emk/top860/top860.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * (C) Copyright 2003
- * EMK Elektronik GmbH <www.emk-elektronik.de>
- * Reinhard Meyer <r.meyer@emk-elektronik.de>
- *
- * Board specific routines for the TOP860
- *
- * - initialisation
- * - interface to VPD data (mac address, clock speeds)
- * - memory controller
- * - serial io initialisation
- * - ethernet io initialisation
- *
- * -----------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <mpc8xx.h>
-
-/*****************************************************************************
- * UPM table for 60ns EDO RAM at 25 MHz bus/external clock
- *****************************************************************************/
-static const uint edo_60ns_25MHz_tbl[] = {
-
-/* single read   (offset 0x00 in upm ram) */
-    0x0ff3fc04,0x08f3fc04,0x00f3fc04,0x00f3fc00,
-    0x33f7fc07,0xfffffc05,0xfffffc05,0xfffffc05,
-/* burst read    (offset 0x08 in upm ram) */
-    0x0ff3fc04,0x08f3fc04,0x00f3fc0c,0x0ff3fc40,
-    0x0cf3fc04,0x03f3fc48,0x0cf3fc04,0x03f3fc48,
-    0x0cf3fc04,0x03f3fc00,0x3ff7fc07,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* single write  (offset 0x18 in upm ram) */
-    0x0ffffc04,0x08fffc04,0x30fffc00,0xf1fffc07,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* burst write   (offset 0x20 in upm ram) */
-    0x0ffffc04,0x08fffc00,0x00fffc04,0x03fffc4c,
-    0x00fffc00,0x07fffc4c,0x00fffc00,0x0ffffc4c,
-    0x00fffc00,0x3ffffc07,0xfffffc05,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* refresh       (offset 0x30 in upm ram) */
-    0xc0fffc04,0x07fffc04,0x0ffffc04,0x0ffffc04,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* exception     (offset 0x3C in upm ram) */
-    0xfffffc07,0xfffffc03,0xfffffc05,0xfffffc05,
-};
-
-/*****************************************************************************
- * Print Board Identity
- *****************************************************************************/
-int checkboard (void)
-{
-	puts ("Board:"CONFIG_IDENT_STRING"\n");
-	return (0);
-}
-
-/*****************************************************************************
- * Initialize DRAM controller
- *****************************************************************************/
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/*
-	 * Only initialize memory controller when running from FLASH.
-	 * When running from RAM, don't touch it.
-	 */
-	if ((ulong) initdram & 0xff000000) {
-		volatile uint *addr1, *addr2;
-		uint i, j;
-
-		upmconfig (UPMA, (uint *) edo_60ns_25MHz_tbl,
-			   sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
-		memctl->memc_mptpr = 0x0200;
-		memctl->memc_mamr = 0x0ca20330;
-		memctl->memc_or2 = -CFG_DRAM_MAX | OR_CSNT_SAM;
-		memctl->memc_br2 = CFG_DRAM_BASE | BR_MS_UPMA | BR_V;
-		/*
-		 * Do 8 read accesses to DRAM
-		 */
-		addr1 = (volatile uint *) 0;
-		addr2 = (volatile uint *) 0x00400000;
-		for (i = 0, j = 0; i < 8; i++)
-			j = addr1[0];
-
-		/*
-		 * Now check whether we got 4MB or 16MB populated
-		 */
-		addr1[0] = 0x12345678;
-		addr1[1] = 0x9abcdef0;
-		addr2[0] = 0xfeedc0de;
-		addr2[1] = 0x47110815;
-		if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815) {
-			/* only 4MB populated */
-			memctl->memc_or2 = -(CFG_DRAM_MAX / 4) | OR_CSNT_SAM;
-		}
-	}
-
-	return -(memctl->memc_or2 & 0xffff0000);
-}
-
-/*****************************************************************************
- * prepare for FLASH detection
- *****************************************************************************/
-void flash_preinit(void)
-{
-}
-
-/*****************************************************************************
- * finalize FLASH setup
- *****************************************************************************/
-void flash_afterinit(uint bank, ulong start, ulong size)
-{
-}
-
-/*****************************************************************************
- * otherinits after RAM is there and we are relocated to RAM
- * note: though this is an int function, nobody cares for the result!
- *****************************************************************************/
-int misc_init_r (void)
-{
-	/* read 'factory' part of EEPROM */
-	extern void read_factory_r (void);
-	read_factory_r ();
-
-	return (0);
-}
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
deleted file mode 100644
index b3747e4242..0000000000
--- a/board/emk/top860/u-boot.lds
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8xx/start.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
deleted file mode 100644
index 580575a5a2..0000000000
--- a/board/emk/top860/u-boot.lds.debug
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile
deleted file mode 100644
index be7e213a9b..0000000000
--- a/board/ep8248/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep8248/config.mk b/board/ep8248/config.mk
deleted file mode 100644
index eda523be26..0000000000
--- a/board/ep8248/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EP82xx series boards by Embedded Planet
-#
-
-TEXT_BASE = 0xFFF00000
diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c
deleted file mode 100644
index 69975caa2e..0000000000
--- a/board/ep8248/ep8248.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Embedded Planet EP8248 boards.
- * Tested on EP8248E.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10            */
-	/* PA9  */ { 0,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PA8  */ { 0,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB14 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30            */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK11) */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK13) */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12            */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11            */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          0,   0,   1,   0,   1 }, /* MDIO            */
-	/* PC8  */ { 1,          0,   0,   1,   0,   1 }, /* MDC             */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 TxD        */
-	/* PC4  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 RxD        */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RxD        */
-	/* PD30 */ { 1,          1,   1,   1,   0,   0 }, /* SCC1 TxD        */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 0,          0,   0,   0,   0,   0 }, /* PD22            */
-	/* PD21 */ { 0,          0,   0,   0,   0,   0 }, /* PD21            */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD20            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-	/* PD15 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SCL         */
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 0,          0,   0,   0,   0,   0 }, /* PD9             */
-	/* PD8  */ { 0,          0,   0,   0,   0,   0 }, /* PD8             */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-int board_early_init_f (void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	bcsr[4] |= 0x30; /* Turn the LEDs off */
-
-#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC)
-	bcsr[6] |= 0x10;
-#endif
-#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC)
-	bcsr[7] |= 0x10;
-#endif
-
-#if CFG_FCC1
-	bcsr[8] |= 0xC0;
-#endif /* CFG_FCC1 */
-#if CFG_FCC2
-	bcsr[8] |= 0x30;
-#endif /* CFG_FCC2 */
-
-	return 0;
-}
-
-long int initdram(int board_type)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-	long int msize = 16L << (bcsr[2] & 3);
-
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
-	uchar c = 0xFF;
-	uint psdmr = CFG_PSDMR;
-	int i;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x02;
-	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;  /* Mode Register write */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
-	*ramaddr = c;
-#endif /* !CFG_RAMBOOT */
-
-	/* Return total 60x bus SDRAM size */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	puts("Board: ");
-	switch (bcsr[0]) {
-	case 0x0C:
-		printf("EP8248E 1.0 CPLD revision %d\n", bcsr[1]);
-		break;
-	default:
-		printf("unknown: ID=%02X\n", bcsr[0]);
-	}
-
-	return 0;
-}
diff --git a/board/ep8248/u-boot.lds b/board/ep8248/u-boot.lds
deleted file mode 100644
index 18c4b46f47..0000000000
--- a/board/ep8248/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/ep82xxm/Makefile b/board/ep82xxm/Makefile
deleted file mode 100644
index 349be1f8dc..0000000000
--- a/board/ep82xxm/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend *~
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep82xxm/config.mk b/board/ep82xxm/config.mk
deleted file mode 100644
index da039e21b3..0000000000
--- a/board/ep82xxm/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# EP82xxM series boards by Embedded Planet
-
-TEXT_BASE = 0xFFF00000
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
deleted file mode 100644
index fe3f78e738..0000000000
--- a/board/ep82xxm/ep82xxm.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (C) 2006 Embedded Planet, LLC.
- *
- * Support for Embedded Planet EP82xxM boards.
- * Tested on EP82xxM (MPC8270).
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-#include <asm/m8260_pci.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-#include <miiphy.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CFG_FCC2 1
-#define CFG_FCC3 1
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	     conf      ppar psor pdir podr pdat */
-	/* PA31 */ { 0,          0,   0,   0,   0,   1 }, /* PA31	     */
-	/* PA30 */ { 0,          0,   0,   0,   0,   1 }, /* PA30	     */
-	/* PA29 */ { 0,          0,   0,   0,   0,   1 }, /* PA29	     */
-	/* PA28 */ { 0,          0,   0,   0,   0,   1 }, /* PA28	     */
-	/* PA27 */ { 0,          0,   0,   0,   0,   1 }, /* PA27	     */
-	/* PA26 */ { 0,          0,   0,   0,   0,   1 }, /* PA26	     */
-	/* PA25 */ { 0,          0,   0,   0,   0,   1 }, /* PA25            */
-	/* PA24 */ { 0,          0,   0,   0,   0,   1 }, /* PA24            */
-	/* PA23 */ { 0,          0,   0,   0,   0,   1 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { 0,          0,   0,   0,   0,   1 }, /* PA21	     */
-	/* PA20 */ { 0,          0,   0,   0,   0,   1 }, /* PA20 	     */
-	/* PA19 */ { 0,          0,   0,   0,   0,   1 }, /* PA19	     */
-	/* PA18 */ { 0,          0,   0,   0,   0,   1 }, /* PA18	     */
-	/* PA17 */ { 0,          0,   0,   0,   0,   1 }, /* PA17  	     */
-	/* PA16 */ { 0,          0,   0,   0,   0,   1 }, /* PA16	     */
-	/* PA15 */ { 0,          0,   0,   0,   0,   1 }, /* PA15	     */
-	/* PA14 */ { 0,          0,   0,   0,   0,   1 }, /* PA14	     */
-	/* PA13 */ { 0,          0,   0,   0,   0,   1 }, /* PA13            */
-	/* PA12 */ { 0,          0,   0,   0,   0,   1 }, /* PA12            */
-	/* PA11 */ { 0,          0,   0,   0,   0,   1 }, /* PA11            */
-	/* PA10 */ { 0,          0,   0,   0,   0,   1 }, /* PA10            */
-	/* PA9  */ { 1,          1,   0,   1,   0,   1 }, /* SMC2 TxD        */
-	/* PA8  */ { 1,          1,   0,   0,   0,   1 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   1 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   1 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   1 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   1 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   1 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   1 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   1 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   1 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	     conf       ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV     */
-	/* PB16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR     */
-	/* PB15 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR     */
-	/* PB14 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN      */
-	/* PB13 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL	     */
-	/* PB12 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS        */
-	/* PB11 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD        */
-	/* PB10 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD        */
-	/* PB9  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD        */
-	/* PB8  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD        */
-	/* PB7  */ { 0,		 0,   0,   0,   0,   0 }, /* PB7             */
-	/* PB6  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD        */
-	/* PB5  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD        */
-	/* PB4  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD        */
-	/* PB3  */ { 0,        	 0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	     conf	ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30            */
-	/* PC29 */ { 1,          1,   1,   0,   0,   0 }, /* SCC1 CTS#       */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3: TXD[0]    */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { 0,  	 0,   0,   0,   0,   0 }, /* PC22	     */
-	/* PC21 */ { 0,   	 0,   0,   0,   0,   0 }, /* PC21	     */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* RxClk (CLK13)   */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* TxClk (CLK14)   */
-	/* PC17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* RxClk (CLK15)   */
-	/* PC16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* TxClk (CLK16)   */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
-	/* PC14 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 CD#        */
-	/* PC13 */ { 1,          1,   0,   0,   0,   0 }, /* SCC2 CTS#       */
-	/* PC12 */ { 1,          1,   0,   0,   0,   0 }, /* SCC2 CD#        */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11            */
-	/* PC10 */ { 1,          1,   0,   0,   0,   0 }, /* SCC3 CD#        */
-	/* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9             */
-	/* PC8  */ { 1,          1,   1,   0,   0,   0 }, /* SCC3 CTS#       */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5             */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4             */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	     conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RXD        */
-	/* PD30 */ { 1,          1,   1,   1,   0,   1 }, /* SCC1 TXD        */
-	/* PD29 */ { 1,          1,   0,   1,   0,   0 }, /* SCC1 RTS#       */
-	/* PD28 */ { 1,          1,   0,   0,   0,   0 }, /* SCC2 RXD        */
-	/* PD27 */ { 1,          1,   0,   1,   0,   0 }, /* SCC2 TXD        */
-	/* PD26 */ { 1,          1,   0,   1,   0,   0 }, /* SCC2 RTS#       */
-	/* PD25 */ { 1,          1,   0,   0,   0,   0 }, /* SCC3 RXD        */
-	/* PD24 */ { 1,          1,   0,   1,   0,   0 }, /* SCC3 TXD        */
-	/* PD23 */ { 1,          1,   0,   1,   0,   0 }, /* SCC3 RTS#       */
-	/* PD22 */ { 0,          0,   0,   0,   0,   1 }, /* PD22            */
-	/* PD21 */ { 0,          0,   0,   0,   0,   1 }, /* PD21            */
-	/* PD20 */ { 0,          0,   0,   0,   0,   1 }, /* PD20            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   1 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   1 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   1 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   1 }, /* PD16            */
-	/* PD15 */ { 1,          1,   1,   0,   1,   1 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   1,   1 }, /* I2C SCL         */
-	/* PD13 */ { 0,          0,   0,   0,   0,   1 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   1 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   1 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   1 }, /* PD10            */
-	/* PD9  */ { 1,          1,   0,   1,   0,   1 }, /* SMC1 TxD        */
-	/* PD8  */ { 1,          1,   0,   0,   0,   1 }, /* SMC1 RxD        */
-	/* PD7  */ { 1,          1,   0,   0,   0,   1 }, /* SMC1 SMSYN      */
-	/* PD6  */ { 0,          0,   0,   0,   0,   1 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   1 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   1 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-#ifdef CONFIG_PCI
-typedef struct pci_ic_s {
-	unsigned long pci_int_stat;
-	unsigned long pci_int_mask;
-}pci_ic_t;
-#endif
-
-int board_early_init_f (void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	bcsr[4] |= 0x30; /* Turn the LEDs off */
-
-#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC)
-	bcsr[6] |= 0x10;
-#endif
-#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC)
-	bcsr[7] |= 0x10;
-#endif
-
-#if CFG_FCC3
-	bcsr[8] |= 0xC0;
-#endif /* CFG_FCC3 */
-#if CFG_FCC2
-	bcsr[8] |= 0x30;
-#endif /* CFG_FCC2 */
-
-	return 0;
-}
-
-long int initdram(int board_type)
-{
-	/* Size in MB of SDRAM populated on board*/
-	long int msize = 256;
-
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	uint psdmr = CFG_PSDMR;
-	int i;
-
-	unsigned char           ramtmp;
-    	unsigned char           *ramptr1 = (unsigned char *)0x00000110;
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-udelay(400);
-
-	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
-	memctl->memc_psdmr = psdmr;
-
-udelay(400);
-
-	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
-	ramtmp = *ramptr1;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
-	for (i = 0; i < 8; i++) {
-		memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
-	}
-	ramtmp = *ramptr1;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;  /* Mode Register write */
-	*ramptr1  = 0xFF;
-	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
-#endif /* !CFG_RAMBOOT */
-
-	/* Return total 60x bus SDRAM size */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	puts("Board: ");
-	switch (bcsr[0]) {
-	case 0x0A:
-		printf("EP82xxM 1.0 CPLD revision %d\n", bcsr[1]);
-		break;
-	default:
-		printf("unknown: ID=%02X\n", bcsr[0]);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc8250_init(&hose);
-}
-#endif
diff --git a/board/ep82xxm/u-boot.lds b/board/ep82xxm/u-boot.lds
deleted file mode 100644
index 18c4b46f47..0000000000
--- a/board/ep82xxm/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/ep88x/Makefile b/board/ep88x/Makefile
deleted file mode 100644
index b2ffd28833..0000000000
--- a/board/ep88x/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep88x/config.mk b/board/ep88x/config.mk
deleted file mode 100644
index 72b326c32e..0000000000
--- a/board/ep88x/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2005 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Embedded Planet EP88x boards
-#
-TEXT_BASE = 0xFC000000
diff --git a/board/ep88x/ep88x.c b/board/ep88x/ep88x.c
deleted file mode 100644
index 5f57f36bbf..0000000000
--- a/board/ep88x/ep88x.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) 2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Embedded Planet EP88x boards.
- * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/*
- * SDRAM uses two Micron chips.
- * Minimal CPU frequency is 40MHz.
- */
-static uint sdram_table[] = {
-	/* Single read	(offset 0x00 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404,
-	0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Burst read	(offset 0x08 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404,
-	0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Single write (offset 0x18 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404,
-	0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Burst write	(offset 0x20 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400,
-	0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Refresh	(offset 0x30 in UPM RAM) */
-	0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04,
-	0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4,
-
-	/* Exception	(offset 0x3C in UPM RAM) */
-	0x0FEA8034, 0x1FB54034,	0xFFFFCC34, 0xFFFFCC05
-};
-
-int board_early_init_f (void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	bcsr[0] |= 0x0C; /* Turn the LEDs off */
-	bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for
-			    flash detection by CFI driver
-			 */
-
-#if defined(CONFIG_8xx_CONS_SMC1)
-	bcsr[6] |= 0x10; /* Enables RS-232 transceiver */
-#endif
-#if defined(CONFIG_8xx_CONS_SCC2)
-	bcsr[7] |= 0x10; /* Enables RS-232 transceiver */
-#endif
-#ifdef CONFIG_ETHER_ON_FEC1
-	bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */
-#endif
-#ifdef CONFIG_ETHER_ON_FEC2
-	bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */
-#endif
-
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/* Configure SDRAM refresh */
-	memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */
-
-	memctl->memc_mamr = (65 << 24) | CFG_MAMR; /* No refresh */
-	udelay(100);
-
-	/* Run MRS pattern from location 0x36 */
-	memctl->memc_mar = 0x88;
-	memctl->memc_mcr = 0x80002236;
-	udelay(100);
-
-	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
-
-	msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
-	memctl->memc_or1  |= ~(msize - 1);
-
-	return msize;
-}
-
-int checkboard( void )
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	puts("Board: ");
-	switch (bcsr[15]) {
-	case 0xE7:
-		puts("EP88xC 1.0");
-		break;
-	default:
-		printf("unknown ID=%02X", bcsr[15]);
-	}
-	printf("  CPLD revision %d\n", bcsr[14]);
-
-	return 0;
-}
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
deleted file mode 100644
index 1d2a7d764b..0000000000
--- a/board/ep88x/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp        : { *(.interp)		}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt           : { *(.plt)		}
-  .text          :
-  {
-    cpu/mpc8xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/esd/cpci750/64360.h b/board/esd/cpci750/64360.h
deleted file mode 100644
index 262abf3e99..0000000000
--- a/board/esd/cpci750/64360.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- * for cpci750 Reinhard Arlt
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * main board support/init for the cpci750.
- */
-
-#ifndef __64360_H__
-#define __64360_H__
-
-/* CPU Configuration bits */
-#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
-#define	CPU_CONF_SINGLE_CPU	(1 << 11)
-#define	CPU_CONF_ENDIANESS	(1 << 12)
-#define CPU_CONF_PIPELINE	(1 << 13)
-#define CPU_CONF_STOP_RETRY	(1 << 17)
-#define CPU_CONF_MULTI_DECODE	(1 << 18)
-#define CPU_CONF_DP_VALID	(1 << 19)
-#define CPU_CONF_PERR_PROP	(1 << 22)
-#define CPU_CONF_AACK_DELAY_2	(1 << 25)
-#define CPU_CONF_AP_VALID	(1 << 26)
-#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
-
-/* CPU Master Control bits */
-#define CPU_MAST_CTL_ARB_EN	(1 << 8)
-#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
-#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
-#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
-#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
-#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
-
-#endif /* __64360_H__ */
diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile
deleted file mode 100644
index 4379cfc74b..0000000000
--- a/board/esd/cpci750/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../../Marvell/common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-SOBJS	= misc.o
-
-COBJS	= $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
-	  mv_eth.o  mpsc.o i2c.o \
-	  sdram_init.o ide.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/esd/cpci750/config.mk b/board/esd/cpci750/config.mk
deleted file mode 100644
index 7795dfa813..0000000000
--- a/board/esd/cpci750/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# cpci750 board
-#
-
-TEXT_BASE = 0xfff00000
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
deleted file mode 100644
index 4647840f3f..0000000000
--- a/board/esd/cpci750/cpci750.c
+++ /dev/null
@@ -1,897 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
- * modifications for the cpci750 by reinhard.arlt@esd-electronics.com
- */
-
-/*
- * cpci750.c - main board support/init for the esd cpci750.
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../../Marvell/include/memory.h"
-#include "../../Marvell/include/pci.h"
-#include "../../Marvell/include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "i2c.h"
-#include "64360.h"
-#include "mv_regs.h"
-
-#undef	DEBUG
-/*#define	DEBUG */
-
-#ifdef CONFIG_PCI
-#define	MAP_PCI
-#endif /* of CONFIG_PCI */
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-extern flash_info_t flash_info[];
-
-/* ------------------------------------------------------------------------- */
-
-/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
-
-/* Unfortunately, we cant change it while we are in flash, so we initialize it
- * to the "final" value. This means that any debug_led calls before
- * board_early_init_f wont work right (like in cpu_init_f).
- * See also my_remap_gt_regs below. (NTL)
- */
-
-void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
-int display_mem_map (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This is a version of the GT register space remapping function that
- * doesn't touch globals (meaning, it's ok to run from flash.)
- *
- * Unfortunately, this has the side effect that a writable
- * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
- */
-
-void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	/* check and see if it's already moved */
-
-/* original ppcboot 1.1.6 source
-
-	temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 20)
-		return;
-
-	temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 20);
-
-	out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
-original ppcboot 1.1.6 source end */
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
-}
-
-#ifdef CONFIG_PCI
-
-static void gt_pci_config (void)
-{
-	unsigned int stat;
-	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
-
-	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
-	 * config registers by writing ones to the bus and device.
-	 * We then update the Virtual register with the correct value for the bus and device.
-	 */
-	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-
-		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-
-	}
-	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-	}
-
-	/* Enable master */
-	PCI_MASTER_ENABLE (0, SELF);
-	PCI_MASTER_ENABLE (1, SELF);
-
-	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
-	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
-	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
-									     <<
-									     18);
-	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
-	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
-
-	/* ronen- add write to pci remap registers for 64460.
-	   in 64360 when writing to pci base go and overide remap automaticaly,
-	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
-
-	/* PCI interface settings */
-	/* Timeout set to retry forever */
-	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
-	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
-
-	/* ronen - enable only CS0 and Internal reg!! */
-	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-
-/*ronen update the pci internal registers base address.*/
-#ifdef MAP_PCI
-	for (stat = 0; stat <= PCI_HOST1; stat++)
-		pciWriteConfigReg (stat,
-				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
-#endif
-
-}
-#endif
-
-/* Setup CPU interface paramaters */
-static void gt_cpu_config (void)
-{
-	cpu_t cpu = get_cpu_type ();
-	ulong tmp;
-
-	/* cpu configuration register */
-	tmp = GTREGREAD (CPU_CONFIGURATION);
-
-	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
-	tmp |= CPU_CONF_SINGLE_CPU;
-#endif
-
-	tmp &= ~CPU_CONF_AACK_DELAY_2;
-
-	tmp |= CPU_CONF_DP_VALID;
-	tmp |= CPU_CONF_AP_VALID;
-
-	tmp |= CPU_CONF_PIPELINE;
-
-	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
-
-	/* CPU master control register */
-	tmp = GTREGREAD (CPU_MASTER_CONTROL);
-
-	tmp |= CPU_MAST_CTL_ARB_EN;
-
-	if ((cpu == CPU_7400) ||
-	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
-
-		tmp |= CPU_MAST_CTL_CLEAN_BLK;
-		tmp |= CPU_MAST_CTL_FLUSH_BLK;
-
-	} else {
-		/* cleanblock must be cleared for CPUs
-		 * that do not support this command (603e, 750)
-		 * see Res#1 */
-		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
-		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
-	}
-	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
-}
-
-/*
- * board_early_init_f.
- *
- * set up gal. device mappings, etc.
- */
-int board_early_init_f (void)
-{
-
-	/*
-	 * set up the GT the way the kernel wants it
-	 * the call to move the GT register space will obviously
-	 * fail if it has already been done, but we're going to assume
-	 * that if it's not at the power-on location, it's where we put
-	 * it last time. (huber)
-	 */
-
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
-
-	/* No PCI in first release of Port To_do: enable it. */
-#ifdef CONFIG_PCI
-	gt_pci_config ();
-#endif
-	/* mask all external interrupt sources */
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
-	/* new in MV6436x */
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
-	/* --------------------- */
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	/* does not exist in MV6436x
-	   GT_REG_WRITE(CPU_INT_0_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_1_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_2_MASK, 0);
-	   GT_REG_WRITE(CPU_INT_3_MASK, 0);
-	   --------------------- */
-
-
-	/* ----- DEVICE BUS SETTINGS ------ */
-
-	/*
-	 * EVB
-	 * 0 - SRAM   ????
-	 * 1 - RTC      ????
-	 * 2 - UART     ????
-	 * 3 - Flash    checked 32Bit Intel Strata
-	 * boot - BootCS checked 8Bit 29LV040B
-	 *
-	 */
-
-	/*
-	 * the dual 7450 module requires burst access to the boot
-	 * device, so the serial rom copies the boot device to the
-	 * on-board sram on the eval board, and updates the correct
-	 * registers to boot from the sram. (device0)
-	 */
-
-	memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
-
-
-	/* configure device timing */
-	GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
-	GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_DEV3_PAR);
-
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
-	/* detect if we are booting from the 32 bit flash */
-	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
-		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
-	} else {
-		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
-	}
-#else
-	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
-#endif
-
-
-	gt_cpu_config ();
-
-	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
-
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
-	DEBUG_LED0_ON ();
-	DEBUG_LED1_ON ();
-	DEBUG_LED2_ON ();
-
-	return 0;
-}
-
-/* various things to do after relocation */
-
-int misc_init_r ()
-{
-	icache_enable ();
-#ifdef CFG_L2
-	l2cache_enable ();
-#endif
-#ifdef CONFIG_MPSC
-
-	mpsc_sdma_init ();
-	mpsc_init2 ();
-#endif
-
-	if (flash_info[3].size < CFG_FLASH_INCREMENT) {
-	        unsigned int flash_offset;
-		unsigned int l;
-
-		flash_offset =  CFG_FLASH_INCREMENT - flash_info[3].size;
-		for (l = 0; l < CFG_MAX_FLASH_SECT; l++) {
-		        if (flash_info[3].start[l] != 0) {
-			      flash_info[3].start[l] += flash_offset;
-			}
-		}
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE,
-			       CFG_MONITOR_BASE + monitor_flash_len  - 1,
-			       &flash_info[3]);
-	}
-	return 0;
-}
-
-void after_reloc (ulong dest_addr, gd_t * gd)
-{
-
-  memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
-
-  display_mem_map ();
-  /* now, jump to the main ppcboot board init code */
-  board_init_r (gd, dest_addr);
-  /* NOTREACHED */
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- *
- * right now, assume borad type. (there is just one...after all)
- */
-
-int checkboard (void)
-{
-	int l_type = 0;
-
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
-	return (l_type);
-}
-
-/* utility functions */
-void debug_led (int led, int mode)
-{
-}
-
-int display_mem_map (void)
-{
-	int i, j;
-	unsigned int base, size, width;
-
-	/* SDRAM */
-	printf ("SD (DDR) RAM\n");
-	for (i = 0; i <= BANK3; i++) {
-		base = memoryGetBankBaseAddress (i);
-		size = memoryGetBankSize (i);
-		if (size != 0) {
-			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
-				i, base, size >> 20);
-		}
-	}
-#ifdef CONFIG_PCI
-	/* CPU's PCI windows */
-	for (i = 0; i <= PCI_HOST1; i++) {
-		printf ("\nCPU's PCI %d windows\n", i);
-		base = pciGetSpaceBase (i, PCI_IO);
-		size = pciGetSpaceSize (i, PCI_IO);
-		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
-			size >> 20);
-		for (j = 0;
-		     j <=
-		     PCI_REGION0
-		     /*ronen currently only first PCI MEM is used 3 */ ;
-		     j++) {
-			base = pciGetSpaceBase (i, j);
-			size = pciGetSpaceSize (i, j);
-			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
-		}
-	}
-#endif /* of CONFIG_PCI */
-	/* Devices */
-	printf ("\nDEVICES\n");
-	for (i = 0; i <= DEVICE3; i++) {
-		base = memoryGetDeviceBaseAddress (i);
-		size = memoryGetDeviceSize (i);
-		width = memoryGetDeviceWidth (i) * 8;
-		printf ("DEV %d:  base - 0x%08x  size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
-		if (i == 0)
-			printf ("\t- FLASH\n");
-		else if (i == 1)
-			printf ("\t- FLASH\n");
-		else if (i == 2)
-			printf ("\t- FLASH\n");
-		else
-			printf ("\t- RTC/REGS/CAN\n");
-	}
-
-	/* Bootrom */
-	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
-	size = memoryGetDeviceSize (BOOT_DEVICE);
-	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
-	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\t- FLASH\n",
-		base, size >> 20, width);
-	return (0);
-}
-
-/* DRAM check routines copied from gw8260 */
-
-#if defined (CFG_DRAM_TEST)
-
-/*********************************************************************/
-/* NAME:  move64() -  moves a double word (64-bit)		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   this function performs a double word move from the data at	     */
-/*   the source pointer to the location at the destination pointer.  */
-/*								     */
-/* INPUTS:							     */
-/*   unsigned long long *src  - pointer to data to move		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   unsigned long long *dest - pointer to locate to move data	     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   May cloober fr0.						     */
-/*								     */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
-	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
-	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
-      : : : "fr0");		/* Clobbers fr0         */
-	return;
-}
-
-
-#if defined (CFG_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaaLL,
-	0xccccccccccccccccLL,
-	0xf0f0f0f0f0f0f0f0LL,
-	0xff00ff00ff00ff00LL,
-	0xffff0000ffff0000LL,
-	0xffffffff00000000LL,
-	0x00000000ffffffffLL,
-	0x0000ffff0000ffffLL,
-	0x00ff00ff00ff00ffLL,
-	0x0f0f0f0f0f0f0f0fLL,
-	0x3333333333333333LL,
-	0x5555555555555555LL,
-};
-
-/*********************************************************************/
-/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Tests data lines for shorts and opens by forcing adjacent data  */
-/*   to opposite states. Because the data lines could be routed in   */
-/*   an arbitrary manner the must ensure test patterns ensure that   */
-/*   every case is tested. By using the following series of binary   */
-/*   patterns every combination of adjacent bits is test regardless  */
-/*   of routing.						     */
-/*								     */
-/*     ...101010101010101010101010				     */
-/*     ...110011001100110011001100				     */
-/*     ...111100001111000011110000				     */
-/*     ...111111110000000011111111				     */
-/*								     */
-/*   Carrying this out, gives us six hex patterns as follows:	     */
-/*								     */
-/*     0xaaaaaaaaaaaaaaaa					     */
-/*     0xcccccccccccccccc					     */
-/*     0xf0f0f0f0f0f0f0f0					     */
-/*     0xff00ff00ff00ff00					     */
-/*     0xffff0000ffff0000					     */
-/*     0xffffffff00000000					     */
-/*								     */
-/*   The number test patterns will always be given by:		     */
-/*								     */
-/*   log(base 2)(number data bits) = log2 (64) = 6		     */
-/*								     */
-/*   To test for short and opens to other signals on our boards. we  */
-/*   simply							     */
-/*   test with the 1's complemnt of the paterns as well.	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern				     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*  Assumes only one one SDRAM bank				     */
-/*								     */
-/*********************************************************************/
-int mem_test_data (void)
-{
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
-	unsigned long long temp64 = 0;
-	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
-	int i;
-	unsigned int hi, lo;
-
-	for (i = 0; i < num_patterns; i++) {
-		move64 (&(pattern[i]), pmem);
-		move64 (pmem, &temp64);
-
-		/* hi = (temp64>>32) & 0xffffffff;          */
-		/* lo = temp64 & 0xffffffff;                */
-		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
-		hi = (pattern[i] >> 32) & 0xffffffff;
-		lo = pattern[i] & 0xffffffff;
-		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
-
-		if (temp64 != pattern[i]) {
-			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
-				hi, lo);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_DATA */
-
-#if defined (CFG_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME:  mem_test_address() -	test address lines		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function performs a test to verify that each word im	     */
-/*   memory is uniquly addressable. The test sequence is as follows: */
-/*								     */
-/*   1) write the address of each word to each word.		     */
-/*   2) verify that each location equals its address		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_address (void)
-{
-	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
-	unsigned int i;
-
-	/* write address to each location */
-	for (i = 0; i < size; i++) {
-		pmem[i] = i;
-	}
-
-	/* verify each loaction */
-	for (i = 0; i < size; i++) {
-		if (pmem[i] != i) {
-			printf ("\n   Address Test Failed at 0x%x", i);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_ADDRESS */
-
-#if defined (CFG_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME:   mem_march() -  memory march				     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Marches up through memory. At each location verifies rmask if   */
-/*   read = 1. At each location write wmask if	write = 1. Displays  */
-/*   failing address and pattern.				     */
-/*								     */
-/* INPUTS:							     */
-/*   volatile unsigned long long * base - start address of test	     */
-/*   unsigned int size - number of dwords(64-bit) to test	     */
-/*   unsigned long long rmask - read verify mask		     */
-/*   unsigned long long wmask - wrtie verify mask		     */
-/*   short read - verifies rmask if read = 1			     */
-/*   short write  - writes wmask if write = 1			     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
-	       unsigned int size,
-	       unsigned long long rmask,
-	       unsigned long long wmask, short read, short write)
-{
-	unsigned int i;
-	unsigned long long temp = 0;
-	unsigned int hitemp, lotemp, himask, lomask;
-
-	for (i = 0; i < size; i++) {
-		if (read != 0) {
-			/* temp = base[i]; */
-			move64 ((unsigned long long *) &(base[i]), &temp);
-			if (rmask != temp) {
-				hitemp = (temp >> 32) & 0xffffffff;
-				lotemp = temp & 0xffffffff;
-				himask = (rmask >> 32) & 0xffffffff;
-				lomask = rmask & 0xffffffff;
-
-				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
-				return 1;
-			}
-		}
-		if (write != 0) {
-			/*  base[i] = wmask; */
-			move64 (&wmask, (unsigned long long *) &(base[i]));
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME:   mem_test_walk() -  a simple walking ones test	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Performs a walking ones through entire physical memory. The     */
-/*   test uses as series of memory marches, mem_march(), to verify   */
-/*   and write the test patterns to memory. The test sequence is as  */
-/*   follows:							     */
-/*     1) march writing 0000...0001				     */
-/*     2) march verifying 0000...0001  , writing  0000...0010	     */
-/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
-/*	   the write mask equals 1000...0000			     */
-/*     4) march verifying 1000...0000				     */
-/*   The test fails if any of the memory marches return a failure.   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays which pass on the memory test is executing	     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_walk (void)
-{
-	unsigned long long mask;
-	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
-
-	unsigned int i;
-
-	mask = 0x01;
-
-	printf ("Initial Pass");
-	mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-	printf ("		");
-	printf ("         ");
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
-	for (i = 0; i < 63; i++) {
-		printf ("Pass %2d", i + 2);
-		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
-			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
-			return 1;
-		}
-		mask = mask << 1;
-		printf ("\b\b\b\b\b\b\b");
-	}
-
-	printf ("Last Pass");
-	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
-		/* printf("mask: 0x%x", mask); */
-		return 1;
-	}
-	printf ("\b\b\b\b\b\b\b\b\b");
-	printf ("	     ");
-	printf ("\b\b\b\b\b\b\b\b\b");
-
-	return 0;
-}
-
-/*********************************************************************/
-/* NAME:    testdram() -  calls any enabled memory tests	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Runs memory tests if the environment test variables are set to  */
-/*   'y'.							     */
-/*								     */
-/* INPUTS:							     */
-/*   testdramdata    - If set to 'y', data test is run.		     */
-/*   testdramaddress - If set to 'y', address test is run.	     */
-/*   testdramwalk    - If set to 'y', walking ones test is run	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int testdram (void)
-{
-	char *s;
-	int rundata    = 0;
-	int runaddress = 0;
-	int runwalk    = 0;
-
-#ifdef CFG_DRAM_TEST_DATA
-	s = getenv ("testdramdata");
-	rundata = (s && (*s == 'y')) ? 1 : 0;
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	s = getenv ("testdramaddress");
-	runaddress = (s && (*s == 'y')) ? 1 : 0;
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	s = getenv ("testdramwalk");
-	runwalk = (s && (*s == 'y')) ? 1 : 0;
-#endif
-
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
-	}
-#ifdef CFG_DRAM_TEST_DATA
-	if (rundata == 1) {
-		printf ("Test DATA ...  ");
-		if (mem_test_data () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	if (runaddress == 1) {
-		printf ("Test ADDRESS ...  ");
-		if (mem_test_address () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	if (runwalk == 1) {
-		printf ("Test WALKING ONEs ...  ");
-		if (mem_test_walk () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("passed\n");
-	}
-	return 0;
-
-}
-#endif /* CFG_DRAM_TEST */
-
-/* ronen - the below functions are used by the bootm function           */
-/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
-/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
-/*    the kernel data areas.                                            */
-/*  - we diable and invalidate the icache and dcache.                   */
-void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
-							new_loc |
-							(INTERNAL_SPACE_DECODE)))))
-	       != temp);
-
-}
-
-void board_prebootm_init ()
-{
-
-/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
-		GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
-
-/* Stop GigE Rx DMA engines */
-	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
-/*	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00); */
-/*      GV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00); */
-
-/* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, CFG_DFL_GT_REGS);
-
-	icache_disable ();
-	invalidate_l1_instruction_cache ();
-	flush_data_cache ();
-	dcache_disable ();
-}
diff --git a/board/esd/cpci750/eth.h b/board/esd/cpci750/eth.h
deleted file mode 100644
index aab32d2a5a..0000000000
--- a/board/esd/cpci750/eth.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __EVB64360_ETH_H__
-#define __EVB64360_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-
-
-int db64360_eth0_poll(void);
-int db64360_eth0_transmit(unsigned int s, volatile char *p);
-void db64360_eth0_disable(void);
-bool network_start(bd_t *bis);
-
-
-#endif /* __EVB64360_ETH_H__ */
diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c
deleted file mode 100644
index 5b1bc01c21..0000000000
--- a/board/esd/cpci750/i2c.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
- * extra improvments by Brain Waite
- * for cpci750 by reinhard.arlt@esd-electronics.com
- */
-#include <common.h>
-#include <mpc8xx.h>
-#include <malloc.h>
-#include "../../Marvell/include/mv_gen_reg.h"
-#include "../../Marvell/include/core.h"
-
-#define I2C_DELAY	    100
-#undef	DEBUG_I2C
-
-#ifdef DEBUG_I2C
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-/* Assuming that there is only one master on the bus (us) */
-
-static void i2c_init (int speed, int slaveaddr)
-{
-	unsigned int n, m, freq, margin, power;
-	unsigned int actualN = 0, actualM = 0;
-	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
-	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
-
-	DP (puts ("i2c_init\n"));
-/* gtI2cMasterInit */
-	for (n = 0; n < 8; n++) {
-		for (m = 0; m < 16; m++) {
-			power = 2 << n;	/* power = 2^(n+1) */
-			freq = tclk / (10 * (m + 1) * power);
-			if (i2cFreq > freq)
-				margin = i2cFreq - freq;
-			else
-				margin = freq - i2cFreq;
-			if (margin < minMargin) {
-				minMargin = margin;
-				actualN = n;
-				actualM = m;
-			}
-		}
-	}
-
-	DP (puts ("setup i2c bus\n"));
-
-	/* Setup bus */
-	/* gtI2cReset */
-	GT_REG_WRITE (I2C_SOFT_RESET, 0);
-	asm(" sync");
-	GT_REG_WRITE (I2C_CONTROL, 0);
-	asm(" sync");
-
-	DP (puts ("set baudrate\n"));
-
-	GT_REG_WRITE (I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN);
-	asm(" sync");
-
-	DP (puts ("udelay...\n"));
-
-	udelay (I2C_DELAY);
-
-	GT_REG_WRITE (I2C_CONTROL, (0x1 << 2) | (0x1 << 6));
-	asm(" sync");
-}
-
-
-static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit)
-{
-	unsigned int status, data, bits = 7;
-	unsigned int control;
-	int count = 0;
-
-	DP (puts ("i2c_select_device\n"));
-
-	/* Output slave address */
-
-	if (ten_bit) {
-		bits = 10;
-	}
-
-	GT_REG_READ (I2C_CONTROL, &control);
-	control |=  (0x1 << 2);
-	GT_REG_WRITE (I2C_CONTROL, control);
-	asm(" sync");
-
-	GT_REG_READ (I2C_CONTROL, &control);
-	control |= (0x1 << 5);	/* generate the I2C_START_BIT */
-	GT_REG_WRITE (I2C_CONTROL, control);
-	asm(" sync");
-	RESET_REG_BITS (I2C_CONTROL, (0x01 << 3));
-	asm(" sync");
-
-	GT_REG_READ (I2C_CONTROL, &status);
-	while ((status & 0x08) != 0x08) {
-		GT_REG_READ (I2C_CONTROL, &status);
-		}
-
-
-	count = 0;
-
-	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-	while (((status & 0xff) != 0x08) && ((status & 0xff) != 0x10)){
-		if (count > 200) {
-#ifdef DEBUG_I2C
-			printf ("Failed to set startbit: 0x%02x\n", status);
-#endif
-			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-			asm(" sync");
-			return (status);
-		}
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		count++;
-	}
-
-	DP (puts ("i2c_select_device:write addr byte\n"));
-
-	/* assert the address */
-
-	data = (dev_addr << 1);
-	/* set the read bit */
-	data |= read;
-	GT_REG_WRITE (I2C_DATA, data);
-	asm(" sync");
-	RESET_REG_BITS (I2C_CONTROL, BIT3);
-	asm(" sync");
-
-	GT_REG_READ (I2C_CONTROL, &status);
-	while ((status & 0x08) != 0x08) {
-		GT_REG_READ (I2C_CONTROL, &status);
-		}
-
-	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-	count = 0;
-	while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) {
-		if (count > 200) {
-#ifdef DEBUG_I2C
-			printf ("Failed to write address: 0x%02x\n", status);
-#endif
-			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-			return (status);
-		}
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		asm(" sync");
-		count++;
-	}
-
-	if (bits == 10) {
-		printf ("10 bit I2C addressing not yet implemented\n");
-		return (0xff);
-	}
-
-	return (0);
-}
-
-static uchar i2c_get_data (uchar * return_data, int len)
-{
-
-	unsigned int data, status;
-	int count = 0;
-
-	DP (puts ("i2c_get_data\n"));
-
-	while (len) {
-
-		RESET_REG_BITS (I2C_CONTROL, BIT3);
-		asm(" sync");
-
-		/* Get and return the data */
-
-		GT_REG_READ (I2C_CONTROL, &status);
-		while ((status & 0x08) != 0x08) {
-			GT_REG_READ (I2C_CONTROL, &status);
-			}
-
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		count++;
-		while ((status & 0xff) != 0x50) {
-			if (count > 20) {
-#ifdef DEBUG_I2C
-				printf ("Failed to get data len status: 0x%02x\n", status);
-#endif
-				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-				asm(" sync");
-				return 0;
-			}
-			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-			count++;
-		}
-		GT_REG_READ (I2C_DATA, &data);
-		len--;
-		*return_data = (uchar) data;
-		return_data++;
-
-	}
-	RESET_REG_BITS (I2C_CONTROL, BIT2 | BIT3);
-	asm(" sync");
-	count = 0;
-
-	GT_REG_READ (I2C_CONTROL, &status);
-	while ((status & 0x08) != 0x08) {
-		GT_REG_READ (I2C_CONTROL, &status);
-		}
-
-	while ((status & 0xff) != 0x58) {
-		if (count > 2000) {
-			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-			return (status);
-		}
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		count++;
-	}
-	GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/* stop */
-	asm(" sync");
-	RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
-	asm(" sync");
-
-	return (0);
-}
-
-
-static uchar i2c_write_data (unsigned int *data, int len)
-{
-	unsigned int status;
-	int count;
-	unsigned int temp;
-	unsigned int *temp_ptr = data;
-
-	DP (puts ("i2c_write_data\n"));
-
-	while (len) {
-		count = 0;
-		temp = (unsigned int) (*temp_ptr);
-		GT_REG_WRITE (I2C_DATA, temp);
-		asm(" sync");
-		RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
-		asm(" sync");
-
-		GT_REG_READ (I2C_CONTROL, &status);
-		while ((status & 0x08) != 0x08) {
-			GT_REG_READ (I2C_CONTROL, &status);
-			}
-
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		count++;
-		while ((status & 0xff) != 0x28) {
-			if (count > 200) {
-				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-				asm(" sync");
-				return (status);
-			}
-			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-			count++;
-		}
-		len--;
-		temp_ptr++;
-	}
-	return (0);
-}
-
-
-static uchar i2c_write_byte (unsigned char *data, int len)
-{
-	unsigned int status;
-	int count;
-	unsigned int temp;
-	unsigned char *temp_ptr = data;
-
-	DP (puts ("i2c_write_byte\n"));
-
-	while (len) {
-		count = 0;
-		/* Set and assert the data */
-		temp = *temp_ptr;
-		GT_REG_WRITE (I2C_DATA, temp);
-		asm(" sync");
-		RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
-		asm(" sync");
-
-
-		GT_REG_READ (I2C_CONTROL, &status);
-		while ((status & 0x08) != 0x08) {
-			GT_REG_READ (I2C_CONTROL, &status);
-			}
-
-		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-		count++;
-		while ((status & 0xff) != 0x28) {
-			if (count > 200) {
-				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
-				asm(" sync");
-				return (status);
-			}
-			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
-			count++;
-		}
-		len--;
-		temp_ptr++;
-	}
-	return (0);
-}
-
-static uchar
-i2c_set_dev_offset (uchar dev_addr, unsigned int offset, int ten_bit,
-		    int alen)
-{
-	uchar status;
-	unsigned int table[2];
-
-	table[1] = (offset     ) & 0x0ff;	/* low byte */
-	table[0] = (offset >> 8) & 0x0ff;	/* high byte */
-
-	DP (puts ("i2c_set_dev_offset\n"));
-
-	status = i2c_select_device (dev_addr, 0, ten_bit);
-	if (status) {
-#ifdef DEBUG_I2C
-22		printf ("Failed to select device setting offset: 0x%02x\n",
-			status);
-#endif
-		return status;
-	}
-/* check the address offset length */
-	if (alen == 0)
-		/* no address offset */
-		return (0);
-	else if (alen == 1) {
-		/* 1 byte address offset */
-		status = i2c_write_data (&offset, 1);
-		if (status) {
-#ifdef DEBUG_I2C
-			printf ("Failed to write data: 0x%02x\n", status);
-#endif
-			return status;
-		}
-	} else if (alen == 2) {
-		/* 2 bytes address offset */
-		status = i2c_write_data (table, 2);
-		if (status) {
-#ifdef DEBUG_I2C
-			printf ("Failed to write data: 0x%02x\n", status);
-#endif
-			return status;
-		}
-	} else {
-		/* address offset unknown or not supported */
-		printf ("Address length offset %d is not supported\n", alen);
-		return 1;
-	}
-	return 0;		/* sucessful completion */
-}
-
-uchar
-i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
-	  int len)
-{
-	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
-
-	DP (puts ("i2c_read\n"));
-
-	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
-
-	status = i2c_set_dev_offset (dev_addr, offset, 0, alen);	/* send the slave address + offset */
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Failed to set slave address & offset: 0x%02x\n",
-			status);
-#endif
-		return status;
-	}
-
-	status = i2c_select_device (dev_addr, 1, 0);
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Failed to select device for data read: 0x%02x\n",
-			status);
-#endif
-		return status;
-	}
-
-	status = i2c_get_data (data, len);
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Data not read: 0x%02x\n", status);
-#endif
-		return status;
-	}
-
-	return 0;
-}
-
-
-void i2c_stop (void)
-{
-	GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));
-	asm(" sync");
-}
-
-
-uchar
-i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
-	   int len)
-{
-	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
-
-	DP (puts ("i2c_write\n"));
-
-	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
-
-	status = i2c_set_dev_offset (dev_addr, offset, 0, alen);	/* send the slave address + offset */
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Failed to set slave address & offset: 0x%02x\n",
-			status);
-#endif
-		return status;
-		}
-
-
-	status = i2c_write_byte (data, len);	/* write the data */
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Data not written: 0x%02x\n", status);
-#endif
-		return status;
-		}
-	/* issue a stop bit */
-	i2c_stop ();
-	return 0;
-}
-
-
-int i2c_probe (uchar chip)
-{
-
-#ifdef DEBUG_I2C
-	unsigned int i2c_status;
-#endif
-	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
-
-	DP (puts ("i2c_probe\n"));
-
-	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
-
-	status = i2c_set_dev_offset (chip, 0, 0, 0);	/* send the slave address + no offset */
-	if (status) {
-#ifdef DEBUG_I2C
-		printf ("Failed to set slave address: 0x%02x\n", status);
-#endif
-		return (int) status;
-	}
-#ifdef DEBUG_I2C
-	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &i2c_status);
-	printf ("address %#x returned %#x\n", chip, i2c_status);
-#endif
-	/* issue a stop bit */
-	i2c_stop ();
-	return 0;		/* successful completion */
-}
diff --git a/board/esd/cpci750/i2c.h b/board/esd/cpci750/i2c.h
deleted file mode 100644
index b669ff0031..0000000000
--- a/board/esd/cpci750/i2c.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
- */
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-/* function declarations */
-uchar i2c_read(uchar, unsigned int, int, uchar*, int);
-
-#endif
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
deleted file mode 100644
index bea99ce8e7..0000000000
--- a/board/esd/cpci750/ide.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/* ide.c - ide support functions */
-
-
-#include <common.h>
-#ifdef CFG_CMD_IDE
-#include <ata.h>
-#include <ide.h>
-#include <pci.h>
-
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
-
-int ide_preinit (void)
-{
-	int status;
-	pci_dev_t devbusfn;
-	int l;
-
-	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
-		ide_bus_offset[l] = -ATA_STATUS;
-	}
-	devbusfn = pci_find_device (0x1103, 0x0004, 0);
-	if (devbusfn != -1) {
-		status = 0;
-
-		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
-				       (u32 *) & ide_bus_offset[0]);
-		ide_bus_offset[0] &= 0xfffffffe;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
-		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
-				       (u32 *) & ide_bus_offset[1]);
-		ide_bus_offset[1] &= 0xfffffffe;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
-	}
-	return (status);
-}
-
-void ide_set_reset (int flag) {
-	return;
-}
-
-#endif /* of CONFIG_CMDS_IDE */
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
deleted file mode 100644
index bca0e1ff50..0000000000
--- a/board/esd/cpci750/local.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/local.h - local configuration options, board specific
- */
-
-#ifndef __LOCAL_H
-#define __LOCAL_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* This tells PPCBoot that the config options are compiled in */
-/* #undef ENV_IS_EMBEDDED */
-/* Don't touch this! PPCBOOT figures this out  based on other
- * magic. */
-
-/* Uncomment and define any of the below options */
-
-/* #define CONFIG_750CX */ /* The 750CX doesn't support as many things in L2CR */
-#define CONFIG_750FX       /* The 750FX doesn't support as many things in L2CR like 750CX*/
-
-/* These want string arguments */
-/* #define CONFIG_BOOTARGS */
-/* #define CONFIG_BOOTCOMMAND */
-/* #define CONFIG_RAMBOOTCOMMAND */
-/* #define CONFIG_NFSBOOTCOMMAND */
-/* #define CFG_AUTOLOAD */
-/* #define CONFIG_PREBOOT */
-
-/* These don't */
-
-/* #define CONFIG_BOOTDELAY  */
-/* #define CONFIG_BAUDRATE */
-/* #define CONFIG_LOADS_ECHO */
-/* #define CONFIG_ETHADDR */
-/* #define CONFIG_ETH2ADDR */
-/* #define CONFIG_ETH3ADDR */
-/* #define CONFIG_IPADDR */
-/* #define CONFIG_SERVERIP */
-/* #define CONFIG_ROOTPATH */
-/* #define CONFIG_GATEWAYIP */
-/* #define CONFIG_NETMASK */
-/* #define CONFIG_HOSTNAME */
-/* #define CONFIG_BOOTFILE */
-/* #define CONFIG_LOADADDR */
-
-/* these hardware addresses are pretty bogus, please change them to
-   suit your needs */
-
-/* first ethernet */
-/* #define CONFIG_ETHADDR          86:06:2d:7e:c6:53 */
-#define CONFIG_ETHADDR          64:36:00:00:00:01
-
-/* next two ethernet hwaddrs */
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		86:06:2d:7e:c6:54
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR		86:06:2d:7e:c6:55
-
-#define CONFIG_ENV_OVERWRITE
-#endif	/* __CONFIG_H */
diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S
deleted file mode 100644
index 160b1d31f7..0000000000
--- a/board/esd/cpci750/misc.S
+++ /dev/null
@@ -1,245 +0,0 @@
-#include <config.h>
-#include <74xx_7xx.h>
-#include "version.h"
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#include "../../Marvell/include/mv_gen_reg.h"
-
-#ifdef CONFIG_ECC
-	/* Galileo specific asm code for initializing ECC */
-	.globl board_relocate_rom
-board_relocate_rom:
-	mflr	r7
-	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
-	/* if we're using ECC, we must use the DMA engine to copy ourselves */
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-
-	mtlr	r7
-	blr
-
-	.globl board_init_ecc
-board_init_ecc:
-	mflr	r7
-	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
-
-	/* now that we're running from ram, init the rest of main memory
-	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
-
-	divw	r3, r10, r8
-
-	/* set up the counter, and init the starting address */
-	mtctr	r3
-	li	r12, 0
-
-	/* bytes per transfer */
-	mr	r5, r8
-about_to_init_ecc:
-1:	mr	r3, r12
-	mr	r4, r12
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-	add	r12, r12, r8
-	bdnz	1b
-
-	mtlr	r7
-	blr
-
-	/* r3:	dest addr
-	 * r4:	source addr
-	 * r5:	byte count
-	 * r11: gt regbase
-	 * trashes:	 r6, r5
-	 */
-start_idma_transfer_0:
-	/* set the byte count, including the OWN bit */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_BYTE_COUNT
-	stwbrx	r5, 0, (r6)
-
-	/* set the source address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
-	stwbrx	r4, 0, (r6)
-
-	/* set the dest address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
-	stwbrx	r3, 0, (r6)
-
-	/* set the next record pointer */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0NEXT_RECORD_POINTER
-	stwbrx	r5, 0, (r6)
-
-	/* set the low control register */
-	/* bit 9 is NON chained mode, bit 31 is new style descriptors.
-	   bit 12 is channel enable */
-	ori	r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
-	/* 15 shifted by 16 (oris) == bit 31 */
-	oris	r5, r5, (1 << 15)
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-
-	/* this waits for the bytecount to return to zero, indicating
-	 * that the trasfer is complete */
-wait_for_idma_0:
-	mr	r5, r11
-	lis	r6, 0xff
-	ori	r6, r6, 0xffff
-	ori	r5, r5, CHANNEL0_DMA_BYTE_COUNT
-1:	lwbrx	r4, 0, (r5)
-	and.	r4, r4, r6
-	bne	1b
-
-	blr
-
-	/* this turns off channel 0 of the idma engine */
-stop_idma_engine_0:
-	/* shut off the DMA engine */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-#endif
-
-#ifdef CFG_BOARD_ASM_INIT
-	/* NOTE: trashes r3-r7 */
-	.globl board_asm_init
-board_asm_init:
-	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
-	li	r5, INTERNAL_SPACE_DECODE
-
-	/* test to see if we've already moved */
-	lwbrx	r6, r5, r4
-	andi.	r6, r6, 0xffff
-	/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
-/*	rlwinm	r7, r4, 8, 16, 31
-	rlwinm	r7, r4, 12, 16, 31	*/ /* original */
-	rlwinm	r7, r4, 16, 16, 31
-	/* -----------------------------------------------------*/
-	cmp	cr0, r7, r6
-	beqlr
-
-	/* nope, have to move the registers */
-	lwbrx	r6, r5, r3
-	andis.	r6, r6, 0xffff
-	or	r6, r6, r7
-	stwbrx	r6, r5, r3
-
-	/* now, poll for the change */
-1:	lwbrx	r7, r5, r4
-	cmp	cr0, r7, r6
-	bne	1b
-
-	lis	r3, CFG_INT_SRAM_BASE@h
-	ori	r3, r3, CFG_INT_SRAM_BASE@l
-	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
-	li	r5, INTEGRATED_SRAM_BASE_ADDR
-	stwbrx  r3, r5, r4
-
-2:	lwbrx	r6, r5, r4
-	cmp	cr0, r3, r6
-	bne	2b
-
-	/* done! */
-	blr
-#endif
-
-/* For use of the debug LEDs */
-	.global led_on0_relocated
-led_on0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC80
-	ori	r18, r18, 0x8000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_off0_relocated
-led_off0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC81
-	ori	r18, r18, 0x4000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_on0
-led_on0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off0
-led_off0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x4000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on1
-led_on1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off1
-led_off1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on2
-led_on2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x0000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off2
-led_off2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
deleted file mode 100644
index 39255f45a7..0000000000
--- a/board/esd/cpci750/mpsc.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-/*
- * mpsc.c - driver for console over the MPSC.
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <asm/cache.h>
-
-#include <malloc.h>
-#include "mpsc.h"
-
-#include "mv_regs.h"
-
-#include "../../Marvell/include/memory.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Define this if you wish to use the MPSC as a register based UART.
- * This will force the serial port to not use the SDMA engine at all.
- */
-
-#undef CONFIG_MPSC_DEBUG_PORT
-
-
-int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
-char (*mpsc_getchar) (void) = mpsc_getchar_debug;
-int (*mpsc_test_char) (void) = mpsc_test_char_debug;
-
-
-static volatile unsigned int *rx_desc_base = NULL;
-static unsigned int rx_desc_index = 0;
-static volatile unsigned int *tx_desc_base = NULL;
-static unsigned int tx_desc_index = 0;
-
-/* local function declarations */
-static int galmpsc_connect (int channel, int connect);
-static int galmpsc_route_rx_clock (int channel, int brg);
-static int galmpsc_route_tx_clock (int channel, int brg);
-static int galmpsc_write_config_regs (int mpsc, int mode);
-static int galmpsc_config_channel_regs (int mpsc);
-static int galmpsc_set_char_length (int mpsc, int value);
-static int galmpsc_set_stop_bit_length (int mpsc, int value);
-static int galmpsc_set_parity (int mpsc, int value);
-static int galmpsc_enter_hunt (int mpsc);
-static int galmpsc_set_brkcnt (int mpsc, int value);
-static int galmpsc_set_tcschar (int mpsc, int value);
-static int galmpsc_set_snoop (int mpsc, int value);
-static int galmpsc_shutdown (int mpsc);
-
-static int galsdma_set_RFT (int channel);
-static int galsdma_set_SFM (int channel);
-static int galsdma_set_rxle (int channel);
-static int galsdma_set_txle (int channel);
-static int galsdma_set_burstsize (int channel, unsigned int value);
-static int galsdma_set_RC (int channel, unsigned int value);
-
-static int galbrg_set_CDV (int channel, int value);
-static int galbrg_enable (int channel);
-static int galbrg_disable (int channel);
-static int galbrg_set_clksrc (int channel, int value);
-static int galbrg_set_CUV (int channel, int value);
-
-static void galsdma_enable_rx (void);
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress,
-				  unsigned int size);
-
-
-#define SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-#define FLUSH_DCACHE(a,b)
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-static void mpsc_debug_init (void)
-{
-
-	volatile unsigned int temp;
-
-	/* Clear the CFR  (CHR4) */
-	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
-	temp &= 0xffffff00;
-	temp |= BIT29;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
-	temp |= (BIT12 | BIT15);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set int mask */
-	temp = GTREGREAD (GALMPSC_0_INT_MASK);
-	temp |= BIT6;
-	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
-}
-#endif
-
-char mpsc_getchar_debug (void)
-{
-	volatile int temp;
-	volatile unsigned int cause;
-
-	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	while ((cause & BIT6) == 0) {
-		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	}
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
-			  (CHANNEL * GALMPSC_REG_GAP));
-	/* By writing 1's to the set bits, the register is cleared */
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
-	return (temp >> 16) & 0xff;
-}
-
-/* special function for running out of flash.  doesn't modify any
- * global variables [josh] */
-int mpsc_putchar_early (char ch)
-{
-	int mpsc = CHANNEL;
-	int temp =
-		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	galmpsc_set_tcschar (mpsc, ch);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
-		      temp | 0x200);
-
-#define MAGIC_FACTOR	(10*1000000)
-
-	udelay (MAGIC_FACTOR / gd->baudrate);
-	return 0;
-}
-
-/* This is used after relocation, see serial.c and mpsc_init2 */
-static int mpsc_putchar_sdma (char ch)
-{
-	volatile unsigned int *p;
-	unsigned int temp;
-
-
-	/* align the descriptor */
-	p = tx_desc_base;
-	memset ((void *) p, 0, 8 * sizeof (unsigned int));
-
-	/* fill one 64 bit buffer */
-	/* word swap, pad with 0 */
-	p[4] = 0;		/* x */
-	p[5] = (unsigned int) ch;	/* x */
-
-	/* CHANGED completely according to GT64260A dox - NTL */
-	p[0] = 0x00010001;	/* 0 */
-	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
-	p[2] = 0;		/* 8 */
-	p[3] = (unsigned int) &p[4];	/* c */
-
-
-	FLUSH_DCACHE (&p[0], &p[8]);
-
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= (TX_DEMAND | TX_STOP);
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	while (p[1] & DESC_OWNER_BIT) {
-		udelay (100);
-		INVALIDATE_DCACHE (&p[1], &p[2]);
-	}
-	return 0;
-}
-
-char mpsc_getchar_sdma (void)
-{
-	static unsigned int done = 0;
-	volatile char ch;
-	unsigned int len = 0, idx = 0, temp;
-
-	volatile unsigned int *p;
-
-
-	do {
-		p = &rx_desc_base[rx_desc_index * 8];
-
-		INVALIDATE_DCACHE (&p[0], &p[1]);
-		/* Wait for character */
-		while (p[1] & DESC_OWNER_BIT) {
-			udelay (100);
-			INVALIDATE_DCACHE (&p[0], &p[1]);
-		}
-
-		/* Handle error case */
-		if (p[1] & (1 << 15)) {
-			printf ("oops, error: %08x\n", p[1]);
-
-			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
-					  (CHANNEL * GALMPSC_REG_GAP));
-			temp |= (1 << 23);
-			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
-				      (CHANNEL * GALMPSC_REG_GAP), temp);
-
-			/* Can't poll on abort bit, so we just wait. */
-			udelay (100);
-
-			galsdma_enable_rx ();
-		}
-
-		/* Number of bytes left in this descriptor */
-		len = p[0] & 0xffff;
-
-		if (len) {
-			/* Where to look */
-			idx = 5;
-			if (done > 3)
-				idx = 4;
-			if (done > 7)
-				idx = 7;
-			if (done > 11)
-				idx = 6;
-
-			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
-			ch = p[idx] & 0xff;
-			done++;
-		}
-
-		if (done < len) {
-			/* this descriptor has more bytes still
-			 * shift down the char we just read, and leave the
-			 * buffer in place for the next time around
-			 */
-			p[idx] = p[idx] >> 8;
-			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
-		}
-
-		if (done == len) {
-			/* nothing left in this descriptor.
-			 * go to next one
-			 */
-			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-			p[0] = 0x00100000;
-			FLUSH_DCACHE (&p[0], &p[1]);
-			/* Next descriptor */
-			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
-			done = 0;
-		}
-	} while (len == 0);	/* galileo bug.. len might be zero */
-
-	return ch;
-}
-
-
-int mpsc_test_char_debug (void)
-{
-	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
-		return 0;
-	else {
-		return 1;
-	}
-}
-
-
-int mpsc_test_char_sdma (void)
-{
-	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	if (p[1] & DESC_OWNER_BIT)
-		return 0;
-	else
-		return 1;
-}
-
-int mpsc_init (int baud)
-{
-	/* BRG CONFIG */
-	galbrg_set_baudrate (CHANNEL, baud);
-	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
-	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
-	galbrg_enable (CHANNEL);	/* Enable BRG */
-
-	/* Set up clock routing */
-	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
-
-	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
-	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
-
-	/* reset MPSC state */
-	galmpsc_shutdown (CHANNEL);
-
-	/* SDMA CONFIG */
-	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
-	galsdma_set_txle (CHANNEL);
-	galsdma_set_rxle (CHANNEL);
-	galsdma_set_RC (CHANNEL, 0xf);
-	galsdma_set_SFM (CHANNEL);
-	galsdma_set_RFT (CHANNEL);
-
-	/* MPSC CONFIG */
-	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
-	galmpsc_config_channel_regs (CHANNEL);
-	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
-	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
-	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-	mpsc_debug_init ();
-#endif
-
-	/* COMM_MPSC CONFIG */
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
-#else
-	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
-#endif
-
-	return 0;
-}
-
-
-void mpsc_sdma_init (void)
-{
-/* Setup SDMA channel0 SDMA_CONFIG_REG*/
-	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
-
-/*  Enable MPSC-Window0 for DRAM Bank0   */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_0_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK0)) != true)
-		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window1    */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_1_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_1_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window2 */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_2_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_2_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-/*  Disable MPSC-Window3 */
-	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_3_BIT,
-				   MV64360_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress
-				   (CS_3_LOW_DECODE_ADDRESS),
-				   memoryGetBankSize (BANK3)) != true)
-		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
-			__FUNCTION__);
-
-/*  Setup MPSC0 access mode Window0 full access */
-	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
-			 (MV64360_SDMA_WIN_ACCESS_FULL <<
-			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/*  Setup MPSC1 access mode Window1 full access */
-	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
-			 (MV64360_SDMA_WIN_ACCESS_FULL <<
-			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-/* Setup MPSC internal address space base address 	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
-
-/* no high address remap*/
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
-
-/* clear interrupt cause register for MPSC (fault register)*/
-	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
-}
-
-
-void mpsc_init2 (void)
-{
-	int i;
-
-#ifndef CONFIG_MPSC_DEBUG_PORT
-	mpsc_putchar = mpsc_putchar_sdma;
-	mpsc_getchar = mpsc_getchar_sdma;
-	mpsc_test_char = mpsc_test_char_sdma;
-#endif
-	/* RX descriptors */
-	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	rx_desc_base = (unsigned int *)
-		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
-
-	rx_desc_index = 0;
-
-	memset ((void *) rx_desc_base, 0,
-		(RX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < RX_DESC; i++) {
-		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
-		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
-		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
-		rx_desc_base[i * 8] = 0x00100000;
-	}
-	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
-
-	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &rx_desc_base[0]);
-
-	/* TX descriptors */
-	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	tx_desc_base = (unsigned int *)
-		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
-
-	tx_desc_index = -1;
-
-	memset ((void *) tx_desc_base, 0,
-		(TX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < TX_DESC; i++) {
-		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 3] =
-			(unsigned int) &tx_desc_base[i * 8 + 4];
-		tx_desc_base[i * 8 + 2] =
-			(unsigned int) &tx_desc_base[(i + 1) * 8];
-		tx_desc_base[i * 8 + 1] =
-			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-
-		/* set sbytecnt and shadow byte cnt to 1 */
-		tx_desc_base[i * 8] = 0x00010001;
-	}
-	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
-
-	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
-
-	udelay (100);
-
-	galsdma_enable_rx ();
-
-	return;
-}
-
-int galbrg_set_baudrate (int channel, int rate)
-{
-	int clock;
-
-	galbrg_disable (channel);	/*ok */
-
-#ifdef ZUMA_NTL
-	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#endif
-
-	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
-
-	galbrg_enable (channel);
-
-	gd->baudrate = rate;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-/* Below are all the private functions that no one else needs */
-
-static int galbrg_set_CDV (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= (value & 0x0000FFFF);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_enable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp |= 0x00010000;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_disable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFEFFFF;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_set_clksrc (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
-	temp |= (value << 18);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-	return 0;
-}
-
-static int galbrg_set_CUV (int channel, int value)
-{
-	/* set CountUpValue */
-	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
-
-	return 0;
-}
-
-
-static int galsdma_set_RFT (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000001;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_SFM (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000002;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_rxle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000040;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_txle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000080;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_RC (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= ~0x0000003c;
-	temp |= (value << 2);
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_burstsize (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= 0xFFFFCFFF;
-	switch (value) {
-	case 8:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x3 << 12)));
-		break;
-
-	case 4:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x2 << 12)));
-		break;
-
-	case 2:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x1 << 12)));
-		break;
-
-	case 1:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x0 << 12)));
-		break;
-
-	default:
-		return -1;
-		break;
-	}
-
-	return 0;
-}
-
-static int galmpsc_connect (int channel, int connect)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
-
-	if ((channel == 0) && connect)
-		temp &= ~0x00000007;
-	else if ((channel == 1) && connect)
-		temp &= ~(0x00000007 << 6);
-	else if ((channel == 0) && !connect)
-		temp |= 0x00000007;
-	else
-		temp |= (0x00000007 << 6);
-
-	/* Just in case... */
-	temp &= 0x3fffffff;
-
-	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_rx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_tx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_write_config_regs (int mpsc, int mode)
-{
-	if (mode == GALMPSC_UART) {
-		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
-		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
-			      0x000004c4);
-
-		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
-		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
-			      0x024003f8);
-		/*        22 2222 1111 */
-		/*        54 3210 9876 */
-		/* 0000 0010 0000 0000 */
-		/*       1 */
-		/*       098 7654 3210 */
-		/* 0000 0011 1111 1000 */
-	} else
-		return -1;
-
-	return 0;
-}
-
-static int galmpsc_config_channel_regs (int mpsc)
-{
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
-
-	galmpsc_set_brkcnt (mpsc, 0x3);
-	galmpsc_set_tcschar (mpsc, 0xab);
-
-	return 0;
-}
-
-static int galmpsc_set_brkcnt (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0x0000FFFF;
-	temp |= (value << 16);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_tcschar (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= value;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_char_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFCFFF;
-	temp |= (value << 12);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_stop_bit_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFBFFF;
-	temp |= (value << 14);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_parity (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	if (value != -1) {
-		temp &= 0xFFF3FFF3;
-		temp |= ((value << 18) | (value << 2));
-		temp |= ((value << 17) | (value << 1));
-	} else {
-		temp &= 0xFFF1FFF1;
-	}
-
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_enter_hunt (int mpsc)
-{
-	int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= 0x80000000;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
-	       MPSC_ENTER_HUNT) {
-		udelay (1);
-	}
-	return 0;
-}
-
-
-static int galmpsc_shutdown (int mpsc)
-{
-	unsigned int temp;
-
-	/* cause RX abort (clears RX) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
-	temp &= ~MPSC_ENTER_HUNT;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
-
-	/* shut down the MPSC */
-	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
-	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
-
-	udelay (100);
-
-	/* shut down the sdma engines. */
-	/* reset config to default */
-	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
-
-	udelay (100);
-
-	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
-
-	udelay (100);
-
-	return 0;
-}
-
-static void galsdma_enable_rx (void)
-{
-	int temp;
-
-	/* Enable RX processing */
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= RX_ENABLE;
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	galmpsc_enter_hunt (CHANNEL);
-}
-
-static int galmpsc_set_snoop (int mpsc, int value)
-{
-	int reg =
-		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
-		MPSC_0_ADDRESS_CONTROL_LOW;
-	int temp = GTREGREAD (reg);
-
-	if (value)
-		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
-	else
-		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
-	GT_REG_WRITE (reg, temp);
-	return 0;
-}
-
-/*******************************************************************************
-* galsdma_set_mem_space - Set MV64360 IDMA memory decoding map.
-*
-* DESCRIPTION:
-*       the MV64360 SDMA has its own address decoding map that is de-coupled
-*       from the CPU interface address decoding windows. The SDMA channels
-*       share four address windows. Each region can be individually configured
-*       by this function by associating it to a target interface and setting
-*       base and size values.
-*
-*      NOTE!!!
-*       The size must be in 64Kbyte granularity.
-*       The base address must be aligned to the size.
-*       The size must be a series of 1s followed by a series of zeros
-*
-* OUTPUT:
-*       None.
-*
-* RETURN:
-*       True for success, false otherwise.
-*
-*******************************************************************************/
-
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress, unsigned int size)
-{
-	unsigned int temp;
-
-	if (size == 0) {
-		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-		return true;
-	}
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return false;
-	}
-	if (size < 0x10000) {
-		return false;
-	}
-
-	/* Align size and base to 64K */
-	baseAddress &= 0xffff0000;
-	size &= 0xffff0000;
-	temp = size >> 16;
-
-	/* Checking that the size is a sequence of '1' followed by a
-	   sequence of '0' starting from LSB to MSB. */
-	while ((temp > 0) && (temp & 0x1)) {
-		temp = temp >> 1;
-	}
-
-	if (temp != 0) {
-		GT_REG_WRITE (MV64360_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64360_CUNIT_SIZE0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-	} else {
-		/* An invalid size was specified */
-		return false;
-	}
-	return true;
-}
diff --git a/board/esd/cpci750/mpsc.h b/board/esd/cpci750/mpsc.h
deleted file mode 100644
index a03d1cc0f8..0000000000
--- a/board/esd/cpci750/mpsc.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include "../../Marvell/include/mv_gen_reg.h"
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_sdma_init(void);
-void mpsc_init2(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-char mpsc_getchar_debug(void);
-int mpsc_test_char_debug(void);
-
-int mpsc_test_char_sdma(void);
-
-extern int (*mpsc_putchar)(char ch);
-extern char (*mpsc_getchar)(void);
-extern int (*mpsc_test_char)(void);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC     5
-#define RX_DESC     20
-
-#define DESC_FIRST  0x00010000
-#define DESC_LAST   0x00020000
-#define DESC_OWNER_BIT  0x80000000
-
-#define TX_DEMAND   0x00800000
-#define TX_STOP     0x00010000
-#define RX_ENABLE   0x00000080
-
-#define SDMA_RX_ABORT 		  (1 << 15)
-#define SDMA_TX_ABORT 		  (1 << 31)
-#define MPSC_TX_ABORT 		  (1 << 7)
-#define MPSC_RX_ABORT             (1 << 23)
-#define MPSC_ENTER_HUNT           (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT            0x1
-#define GALMPSC_DISCONNECT         0x0
-
-#define GALMPSC_UART               0x1
-
-#define GALMPSC_STOP_BITS_1        0x0
-#define GALMPSC_STOP_BITS_2        0x1
-#define GALMPSC_CHAR_LENGTH_8      0x3
-#define GALMPSC_CHAR_LENGTH_7      0x2
-
-#define GALMPSC_PARITY_ODD         0x0
-#define GALMPSC_PARITY_EVEN        0x2
-#define GALMPSC_PARITY_MARK        0x3
-#define GALMPSC_PARITY_SPACE       0x1
-#define GALMPSC_PARITY_NONE        -1
-
-#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
-#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
-#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
-#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
-
-#define GALMPSC_REG_GAP            0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
-#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
-#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
-#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
-#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
-#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
-#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
-#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
-#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST     (1 << 16)
-#define GALSDMA_COMMAND_LAST      (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO      (1 << 30)
-#define GALSDMA_COMMAND_OWNER     (1 << 31)
-
-#define GALSDMA_RX                 0
-#define GALSDMA_TX                 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
-#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
-#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
-#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
-#define GALSDMA_REG_DIFF           0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
-#define GALMPSC_0_INT_CAUSE        0xb804
-#define GALMPSC_0_INT_MASK         0xb884
-
-#define GALSDMA_MODE_UART          0
-#define GALSDMA_MODE_BISYNC        1
-#define GALSDMA_MODE_HDLC          2
-#define GALSDMA_MODE_TRANSPARENT   3
-
-#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
-#define GALBRG_REG_GAP             0x0008
-#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
-
-#endif /* __MPSC_H__ */
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
deleted file mode 100644
index 2629c23df1..0000000000
--- a/board/esd/cpci750/mv_eth.c
+++ /dev/null
@@ -1,2781 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.c - header file for the polled mode GT ethernet driver
- */
-#include <common.h>
-#include <net.h>
-#include <malloc.h>
-
-#include "mv_eth.h"
-
-/* enable Debug outputs */
-
-#undef DEBUG_MV_ETH
-
-#ifdef DEBUG_MV_ETH
-#define DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-#undef MV64360_CHECKSUM_OFFLOAD
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-/* Definition for configuring driver */
-/* #define UPDATE_STATS_BY_SOFTWARE */
-#undef MV64360_RX_QUEUE_FILL_ON_TASK
-
-
-/* Constants */
-#define MAGIC_ETH_RUNNING		8031971
-#define MV64360_INTERNAL_SRAM_SIZE                      _256K
-#define EXTRA_BYTES 32
-#define WRAP       ETH_HLEN + 2 + 4 + 16
-#define BUFFER_MTU dev->mtu + WRAP
-#define INT_CAUSE_UNMASK_ALL		0x0007ffff
-#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
-#ifdef MV64360_RX_FILL_ON_TASK
-#define INT_CAUSE_MASK_ALL		0x00000000
-#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
-#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
-#endif
-
-/* Read/Write to/from MV64360 internal registers */
-#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
-#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
-#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
-#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
-
-/* Static function declarations */
-static int mv64360_eth_real_open (struct eth_device *eth);
-static int mv64360_eth_real_stop (struct eth_device *eth);
-static struct net_device_stats *mv64360_eth_get_stats (struct eth_device
-						       *dev);
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
-static void mv64360_eth_update_stat (struct eth_device *dev);
-bool db64360_eth_start (struct eth_device *eth);
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset);
-int mv64360_eth_receive (struct eth_device *dev);
-
-int mv64360_eth_xmit (struct eth_device *, volatile void *packet, int length);
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-static void mv64360_eth_print_stat (struct eth_device *dev);
-#endif
-/* Processes a received packet */
-extern void NetReceive (volatile uchar *, int);
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-/*************************************************
- *Helper functions - used inside the driver only *
- *************************************************/
-#ifdef DEBUG_MV_ETH
-void print_globals (struct eth_device *dev)
-{
-	printf ("Ethernet PRINT_Globals-Debug function\n");
-	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
-		(unsigned int) dev->priv);
-	printf ("Base Address for mv64360_eth_priv:	%08x\n",
-		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
-				 port_private));
-
-	printf ("GT Internal Base Address:	%08x\n",
-		INTERNAL_REG_BASE_ADDR);
-	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64360_TX_QUEUE_SIZE);
-	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64360_RX_QUEUE_SIZE);
-	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_rx_buffer_base[0],
-		(MV64360_RX_QUEUE_SIZE * MV64360_RX_BUFFER_SIZE) + 32);
-	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_tx_buffer_base[0],
-		(MV64360_TX_QUEUE_SIZE * MV64360_TX_BUFFER_SIZE) + 32);
-}
-#endif
-
-#define my_cpu_to_le32(x) my_le32_to_cpu((x))
-
-unsigned long my_le32_to_cpu (unsigned long x)
-{
-	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) << 8) |
-		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
-}
-
-
-/**********************************************************************
- * mv64360_eth_print_phy_status
- *
- * Prints gigabit ethenret phy status
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_print_phy_status (struct eth_device *dev)
-{
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	unsigned int port_status, phy_reg_data;
-
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		printf ("Ethernet port changed link status to DOWN\n");
-	} else {
-		port_status =
-			MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
-		printf ("Ethernet status port %d: Link up", port_num);
-		printf (", %s",
-			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
-		if (port_status & BIT4)
-			printf (", Speed 1 Gbps");
-		else
-			printf (", %s",
-				(port_status & BIT5) ? "Speed 100 Mbps" :
-				"Speed 10 Mbps");
-		printf ("\n");
-	}
-}
-
-/**********************************************************************
- * u-boot entry functions for mv64360_eth
- *
- **********************************************************************/
-int db64360_eth_probe (struct eth_device *dev)
-{
-	return ((int) db64360_eth_start (dev));
-}
-
-int db64360_eth_poll (struct eth_device *dev)
-{
-	return mv64360_eth_receive (dev);
-}
-
-int db64360_eth_transmit (struct eth_device *dev, volatile void *packet,
-			  int length)
-{
-	mv64360_eth_xmit (dev, packet, length);
-	return 0;
-}
-
-void db64360_eth_disable (struct eth_device *dev)
-{
-	mv64360_eth_stop (dev);
-}
-
-
-void mv6436x_eth_initialize (bd_t * bis)
-{
-	struct eth_device *dev;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	int devnum, x, temp;
-	char *s, *e, buf[64];
-
-	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
-		dev = calloc (sizeof (*dev), 1);
-		if (!dev) {
-			printf ("%s: mv_enet%d allocation failure, %s\n",
-				__FUNCTION__, devnum, "eth_device structure");
-			return;
-		}
-
-		/* must be less than NAMESIZE (16) */
-		sprintf (dev->name, "mv_enet%d", devnum);
-
-#ifdef DEBUG
-		printf ("Initializing %s\n", dev->name);
-#endif
-
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-		/* ronen - set the MAC addr in the HW */
-		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
-
-		dev->init = (void *) db64360_eth_probe;
-		dev->halt = (void *) ethernet_phy_reset;
-		dev->send = (void *) db64360_eth_transmit;
-		dev->recv = (void *) db64360_eth_poll;
-
-		ethernet_private =
-			calloc (sizeof (*ethernet_private), 1);
-		dev->priv = (void *) ethernet_private;
-		if (!ethernet_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Private Device Structure");
-			free (dev);
-			return;
-		}
-		/* start with an zeroed ETH_PORT_INFO */
-		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
-		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-		/* set pointer to memory for stats data structure etc... */
-		port_private =
-			calloc (sizeof (*ethernet_private), 1);
-		ethernet_private->port_private = (void *)port_private;
-		if (!port_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Port Private Device Structure");
-
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-
-		port_private->stats =
-			calloc (sizeof (struct net_device_stats), 1);
-		if (!port_private->stats) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Net stat Structure");
-
-			free (port_private);
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-		memset (ethernet_private->port_private, 0,
-			sizeof (struct mv64360_eth_priv));
-		switch (devnum) {
-		case 0:
-			ethernet_private->port_num = ETH_0;
-			break;
-		case 1:
-			ethernet_private->port_num = ETH_1;
-			break;
-		case 2:
-			ethernet_private->port_num = ETH_2;
-			break;
-		default:
-			printf ("Invalid device number %d\n", devnum);
-			break;
-		};
-
-		port_private->port_num = devnum;
-		/*
-		 * Read MIB counter on the GT in order to reset them,
-		 * then zero all the stats fields in memory
-		 */
-		mv64360_eth_update_stat (dev);
-		memset (port_private->stats, 0,
-			sizeof (struct net_device_stats));
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-
-		case 1:
-			s = "eth1addr";
-			break;
-
-		case 2:
-			s = "eth2addr";
-			break;
-
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-
-		DP (printf ("Allocating descriptor and buffer rings\n"));
-
-		ethernet_private->p_rx_desc_area_base[0] =
-			(ETH_RX_DESC *) memalign (16,
-						  RX_DESC_ALIGNED_SIZE *
-						  MV64360_RX_QUEUE_SIZE + 1);
-		ethernet_private->p_tx_desc_area_base[0] =
-			(ETH_TX_DESC *) memalign (16,
-						  TX_DESC_ALIGNED_SIZE *
-						  MV64360_TX_QUEUE_SIZE + 1);
-
-		ethernet_private->p_rx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64360_RX_QUEUE_SIZE *
-					   MV64360_TX_BUFFER_SIZE + 1);
-		ethernet_private->p_tx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64360_RX_QUEUE_SIZE *
-					   MV64360_TX_BUFFER_SIZE + 1);
-
-#ifdef DEBUG_MV_ETH
-		/* DEBUG OUTPUT prints adresses of globals */
-		print_globals (dev);
-#endif
-		eth_register (dev);
-
-	}
-	DP (printf ("%s: exit\n", __FUNCTION__));
-
-}
-
-/**********************************************************************
- * mv64360_eth_open
- *
- * This function is called when openning the network device. The function
- * should initialize all the hardware, initialize cyclic Rx/Tx
- * descriptors chain and buffers and allocate an IRQ to the network
- * device.
- *
- * Input : a pointer to the network device structure
- * / / ronen - changed the output to match  net/eth.c needs
- * Output : nonzero of success , zero if fails.
- * under construction
- **********************************************************************/
-
-int mv64360_eth_open (struct eth_device *dev)
-{
-	return (mv64360_eth_real_open (dev));
-}
-
-/* Helper function for mv64360_eth_open */
-static int mv64360_eth_real_open (struct eth_device *dev)
-{
-
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	u32 port_status, phy_reg_data;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	/* ronen - when we update the MAC env params we only update dev->enetaddr
-	   see ./net/eth.c eth_set_enetaddr() */
-	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Clear the ethernet port interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-
-	/* Unmask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL);
-
-	/* Unmask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL_EXT);
-
-	/* Set phy address of the port */
-	ethernet_private->port_phy_addr = 0x8 + port_num;
-
-	/* Activate the DMA channels etc */
-	eth_port_init (ethernet_private);
-
-
-	/* "Allocate" setup TX rings */
-
-	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		port_private->tx_ring_size[queue] = MV64360_TX_QUEUE_SIZE;
-		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
-		ethernet_private->tx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
-			0, ethernet_private->tx_desc_area_size[queue]);
-
-		/* initialize tx desc ring with low level driver */
-		if (ether_init_tx_desc_ring
-		    (ethernet_private, ETH_Q0,
-		     port_private->tx_ring_size[queue],
-		     MV64360_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		     (unsigned int) ethernet_private->
-		     p_tx_desc_area_base[queue],
-		     (unsigned int) ethernet_private->
-		     p_tx_buffer_base[queue]) == false)
-			printf ("### Error initializing TX Ring\n");
-	}
-
-	/* "Allocate" setup RX rings */
-	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		/* Meantime RX Ring are fixed - but must be configurable by user */
-		port_private->rx_ring_size[queue] = MV64360_RX_QUEUE_SIZE;
-		size = (port_private->rx_ring_size[queue] *
-			RX_DESC_ALIGNED_SIZE);
-		ethernet_private->rx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
-			0, ethernet_private->rx_desc_area_size[queue]);
-		if ((ether_init_rx_desc_ring
-		     (ethernet_private, ETH_Q0,
-		      port_private->rx_ring_size[queue],
-		      MV64360_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		      (unsigned int) ethernet_private->
-		      p_rx_desc_area_base[queue],
-		      (unsigned int) ethernet_private->
-		      p_rx_buffer_base[queue])) == false)
-			printf ("### Error initializing RX Ring\n");
-	}
-
-	eth_port_start (ethernet_private);
-
-	/* Set maximum receive buffer to 9700 bytes */
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num),
-		      (0x5 << 17) |
-		      (MV_REG_READ
-		       (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num))
-		       & 0xfff1ffff));
-
-	/*
-	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
-	 * disable the leaky bucket mechanism .
-	 */
-
-	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
-	port_status = MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		/* Reset PHY */
-		if ((ethernet_phy_reset (port_num)) != true) {
-			printf ("$$ Warnning: No link on port %d \n",
-				port_num);
-			return 0;
-		} else {
-			eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-			if (!(phy_reg_data & 0x20)) {
-				printf ("### Error: Phy is not active\n");
-				return 0;
-			}
-		}
-	} else {
-		mv64360_eth_print_phy_status (dev);
-	}
-	port_private->eth_running = MAGIC_ETH_RUNNING;
-	return 1;
-}
-
-
-static int mv64360_eth_free_tx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop Tx Queues */
-	MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free TX rings */
-	DP (printf ("Clearing previously allocated TX queues... "));
-	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
-		/* Free on TX rings */
-		for (p_tx_curr_desc =
-		     ethernet_private->p_tx_desc_area_base[queue];
-		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
-		      ethernet_private->p_tx_desc_area_base[queue] +
-		      ethernet_private->tx_desc_area_size[queue]);
-		     p_tx_curr_desc =
-		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
-				      TX_DESC_ALIGNED_SIZE)) {
-			/* this is inside for loop */
-			if (p_tx_curr_desc->return_info != 0) {
-				p_tx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-static int mv64360_eth_free_rx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free RX rings */
-	DP (printf ("Clearing previously allocated RX queues... "));
-	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
-		/* Free preallocated skb's on RX rings */
-		for (p_rx_curr_desc =
-		     ethernet_private->p_rx_desc_area_base[queue];
-		     (((unsigned int) p_rx_curr_desc <
-		       ((unsigned int) ethernet_private->
-			p_rx_desc_area_base[queue] +
-			ethernet_private->rx_desc_area_size[queue])));
-		     p_rx_curr_desc =
-		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
-				      RX_DESC_ALIGNED_SIZE)) {
-			if (p_rx_curr_desc->return_info != 0) {
-				p_rx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-/**********************************************************************
- * mv64360_eth_stop
- *
- * This function is used when closing the network device.
- * It updates the hardware,
- * release all memory that holds buffers and descriptors and release the IRQ.
- * Input : a pointer to the device structure
- * Output : zero if success , nonzero if fails
- *********************************************************************/
-
-int mv64360_eth_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Disable all gigE address decoder */
-	MV_REG_WRITE (MV64360_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
-	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
-	mv64360_eth_real_stop (dev);
-
-	return 0;
-};
-
-/* Helper function for mv64360_eth_stop */
-
-static int mv64360_eth_real_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-
-	mv64360_eth_free_tx_rings (dev);
-	mv64360_eth_free_rx_rings (dev);
-
-	eth_port_reset (ethernet_private->port_num);
-	/* Disable ethernet port interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-	/* Mask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num), 0);
-	/* Mask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
-	MV_RESET_REG_BITS (MV64360_CPU_INTERRUPT0_MASK_HIGH,
-			   BIT0 << port_num);
-	/* Print Network statistics */
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-	/*
-	 * Print statistics (only if ethernet is running),
-	 * then zero all the stats fields in memory
-	 */
-	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
-		port_private->eth_running = 0;
-		mv64360_eth_print_stat (dev);
-	}
-	memset (port_private->stats, 0, sizeof (struct net_device_stats));
-#endif
-	DP (printf ("\nEthernet stopped ... \n"));
-	return 0;
-}
-
-
-/**********************************************************************
- * mv64360_eth_start_xmit
- *
- * This function is queues a packet in the Tx descriptor for
- * required port.
- *
- * Input : skb - a pointer to socket buffer
- *         dev - a pointer to the required port
- *
- * Output : zero upon success
- **********************************************************************/
-
-int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
-		      int dataSize)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	ETH_FUNC_RET_STATUS status;
-	struct net_device_stats *stats;
-	ETH_FUNC_RET_STATUS release_result;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	stats = port_private->stats;
-
-	/* Update packet info data structure */
-	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
-	pkt_info.byte_cnt = dataSize;
-	pkt_info.buf_ptr = (unsigned int) dataPtr;
-	pkt_info.return_info = 0;
-
-	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
-	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
-		printf ("Error on transmitting packet ..");
-		if (status == ETH_QUEUE_FULL)
-			printf ("ETH Queue is full. \n");
-		if (status == ETH_QUEUE_LAST_RESOURCE)
-			printf ("ETH Queue: using last available resource. \n");
-		goto error;
-	}
-
-	/* Update statistics and start of transmittion time */
-	stats->tx_bytes += dataSize;
-	stats->tx_packets++;
-
-	/* Check if packet(s) is(are) transmitted correctly (release everything) */
-	do {
-		release_result =
-			eth_tx_return_desc (ethernet_private, ETH_Q0,
-					    &pkt_info);
-		switch (release_result) {
-		case ETH_OK:
-			DP (printf ("descriptor released\n"));
-			if (pkt_info.cmd_sts & BIT0) {
-				printf ("Error in TX\n");
-				stats->tx_errors++;
-
-			}
-			break;
-		case ETH_RETRY:
-			DP (printf ("transmission still in process\n"));
-			break;
-
-		case ETH_ERROR:
-			printf ("routine can not access Tx desc ring\n");
-			break;
-
-		case ETH_END_OF_JOB:
-			DP (printf ("the routine has nothing to release\n"));
-			break;
-		default:	/* should not happen */
-			break;
-		}
-	} while (release_result == ETH_OK);
-
-
-	return 0;		/* success */
-      error:
-	return 1;		/* Failed - higher layers will free the skb */
-}
-
-/**********************************************************************
- * mv64360_eth_receive
- *
- * This function is forward packets that are received from the port's
- * queues toward kernel core or FastRoute them to another interface.
- *
- * Input : dev - a pointer to the required interface
- *         max - maximum number to receive (0 means unlimted)
- *
- * Output : number of served packets
- **********************************************************************/
-
-int mv64360_eth_receive (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	struct net_device_stats *stats;
-
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
-		ETH_OK)) {
-
-#ifdef DEBUG_MV_ETH
-		if (pkt_info.byte_cnt != 0) {
-			printf ("%s: Received %d byte Packet @ 0x%x\n",
-				__FUNCTION__, pkt_info.byte_cnt,
-				pkt_info.buf_ptr);
-		}
-#endif
-		/* Update statistics. Note byte count includes 4 byte CRC count */
-		stats->rx_packets++;
-		stats->rx_bytes += pkt_info.byte_cnt;
-
-		/*
-		 * In case received a packet without first / last bits on OR the error
-		 * summary bit is on, the packets needs to be dropeed.
-		 */
-		if (((pkt_info.
-		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
-		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
-		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
-			stats->rx_dropped++;
-
-			printf ("Received packet spread on multiple descriptors\n");
-
-			/* Is this caused by an error ? */
-			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
-				stats->rx_errors++;
-			}
-
-			/* free these descriptors again without forwarding them to the higher layers */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-			/* /free these descriptors again */
-		} else {
-
-/* !!! call higher layer processing */
-#ifdef DEBUG_MV_ETH
-			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
-#endif
-			/* let the upper layer handle the packet */
-			NetReceive ((uchar *) pkt_info.buf_ptr,
-				    (int) pkt_info.byte_cnt);
-
-/* **************************************************************** */
-/* free descriptor  */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-			DP (printf
-			    ("RX: pkt_info.buf_ptr =	%x\n",
-			     pkt_info.buf_ptr));
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-
-/* **************************************************************** */
-
-		}
-	}
-	mv64360_eth_get_stats (dev);	/* update statistics */
-	return 1;
-}
-
-/**********************************************************************
- * mv64360_eth_get_stats
- *
- * Returns a pointer to the interface statistics.
- *
- * Input : dev - a pointer to the required interface
- *
- * Output : a pointer to the interface's statistics
- **********************************************************************/
-
-static struct net_device_stats *mv64360_eth_get_stats (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	mv64360_eth_update_stat (dev);
-
-	return port_private->stats;
-}
-
-
-/**********************************************************************
- * mv64360_eth_update_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_update_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-	volatile unsigned int dummy;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	stats->rx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_RECEIVED);
-	stats->tx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_SENT);
-	stats->rx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
-	/*
-	 * Ideally this should be as follows -
-	 *
-	 *   stats->rx_bytes   += stats->rx_bytes +
-	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
-	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
-	 *
-	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
-	 * is just a dummy read for proper work of the GigE port
-	 */
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
-	stats->tx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
-	stats->rx_errors += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MAC_RECEIVE_ERROR);
-
-	/* Rx dropped is for received packet with CRC error */
-	stats->rx_dropped +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_BAD_CRC_EVENT);
-	stats->multicast += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
-	stats->collisions +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_COLLISION) +
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_LATE_COLLISION);
-	/* detailed rx errors */
-	stats->rx_length_errors +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_UNDERSIZE_RECEIVED)
-		+
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_OVERSIZE_RECEIVED);
-	/* detailed tx errors */
-}
-
-#ifndef  UPDATE_STATS_BY_SOFTWARE
-/**********************************************************************
- * mv64360_eth_print_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64360_eth_print_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64360_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64360_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	printf ("\n### Network statistics: ###\n");
-	printf ("--------------------------\n");
-	printf (" Packets received:		%ld\n", stats->rx_packets);
-	printf (" Packets send:			%ld\n", stats->tx_packets);
-	printf (" Received bytes:		%ld\n", stats->rx_bytes);
-	printf (" Send bytes:			%ld\n", stats->tx_bytes);
-	if (stats->rx_errors != 0)
-		printf (" Rx Errors:			%ld\n",
-			stats->rx_errors);
-	if (stats->rx_dropped != 0)
-		printf (" Rx dropped (CRC Errors):	%ld\n",
-			stats->rx_dropped);
-	if (stats->multicast != 0)
-		printf (" Rx mulicast frames:		%ld\n",
-			stats->multicast);
-	if (stats->collisions != 0)
-		printf (" No. of collisions:		%ld\n",
-			stats->collisions);
-	if (stats->rx_length_errors != 0)
-		printf (" Rx length errors:		%ld\n",
-			stats->rx_length_errors);
-}
-#endif
-
-/**************************************************************************
- *network_start - Network Kick Off Routine UBoot
- *Inputs :
- *Outputs :
- **************************************************************************/
-
-bool db64360_eth_start (struct eth_device *dev)
-{
-	return (mv64360_eth_open (dev));	/* calls real open */
-}
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.   *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-/*
- * based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-/********************************************************************************
- * Marvell's Gigabit Ethernet controller low level driver
- *
- * DESCRIPTION:
- *       This file introduce low level API to Marvell's Gigabit Ethernet
- *		controller. This Gigabit Ethernet Controller driver API controls
- *		1) Operations (i.e. port init, start, reset etc').
- *		2) Data flow (i.e. port send, receive etc').
- *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
- *		struct.
- *		This struct includes user configuration information as well as
- *		driver internal data needed for its operations.
- *
- *		Supported Features:
- *		- This low level driver is OS independent. Allocating memory for
- *		  the descriptor rings and buffers are not within the scope of
- *		  this driver.
- *		- The user is free from Rx/Tx queue managing.
- *		- This low level driver introduce functionality API that enable
- *		  the to operate Marvell's Gigabit Ethernet Controller in a
- *		  convenient way.
- *		- Simple Gigabit Ethernet port operation API.
- *		- Simple Gigabit Ethernet port data flow API.
- *		- Data flow and operation API support per queue functionality.
- *		- Support cached descriptors for better performance.
- *		- Enable access to all four DRAM banks and internal SRAM memory
- *		  spaces.
- *		- PHY access and control API.
- *		- Port control register configuration API.
- *		- Full control over Unicast and Multicast MAC configurations.
- *
- *		Operation flow:
- *
- *		Initialization phase
- *		This phase complete the initialization of the ETH_PORT_INFO
- *		struct.
- *		User information regarding port configuration has to be set
- *		prior to calling the port initialization routine. For example,
- *		the user has to assign the port_phy_addr field which is board
- *		depended parameter.
- *		In this phase any port Tx/Rx activity is halted, MIB counters
- *		are cleared, PHY address is set according to user parameter and
- *		access to DRAM and internal SRAM memory spaces.
- *
- *		Driver ring initialization
- *		Allocating memory for the descriptor rings and buffers is not
- *		within the scope of this driver. Thus, the user is required to
- *		allocate memory for the descriptors ring and buffers. Those
- *		memory parameters are used by the Rx and Tx ring initialization
- *		routines in order to curve the descriptor linked list in a form
- *		of a ring.
- *		Note: Pay special attention to alignment issues when using
- *		cached descriptors/buffers. In this phase the driver store
- *		information in the ETH_PORT_INFO struct regarding each queue
- *		ring.
- *
- *		Driver start
- *		This phase prepares the Ethernet port for Rx and Tx activity.
- *		It uses the information stored in the ETH_PORT_INFO struct to
- *		initialize the various port registers.
- *
- *		Data flow:
- *		All packet references to/from the driver are done using PKT_INFO
- *		struct.
- *		This struct is a unified struct used with Rx and Tx operations.
- *		This way the user is not required to be familiar with neither
- *		Tx nor Rx descriptors structures.
- *		The driver's descriptors rings are management by indexes.
- *		Those indexes controls the ring resources and used to indicate
- *		a SW resource error:
- *		'current'
- *		This index points to the current available resource for use. For
- *		example in Rx process this index will point to the descriptor
- *		that will be passed to the user upon calling the receive routine.
- *		In Tx process, this index will point to the descriptor
- *		that will be assigned with the user packet info and transmitted.
- *		'used'
- *		This index points to the descriptor that need to restore its
- *		resources. For example in Rx process, using the Rx buffer return
- *		API will attach the buffer returned in packet info to the
- *		descriptor pointed by 'used'. In Tx process, using the Tx
- *		descriptor return will merely return the user packet info with
- *		the command status of  the transmitted buffer pointed by the
- *		'used' index. Nevertheless, it is essential to use this routine
- *		to update the 'used' index.
- *		'first'
- *		This index supports Tx Scatter-Gather. It points to the first
- *		descriptor of a packet assembled of multiple buffers. For example
- *		when in middle of Such packet we have a Tx resource error the
- *		'curr' index get the value of 'first' to indicate that the ring
- *		returned to its state before trying to transmit this packet.
- *
- *		Receive operation:
- *		The eth_port_receive API set the packet information struct,
- *		passed by the caller, with received information from the
- *		'current' SDMA descriptor.
- *		It is the user responsibility to return this resource back
- *		to the Rx descriptor ring to enable the reuse of this source.
- *		Return Rx resource is done using the eth_rx_return_buff API.
- *
- *		Transmit operation:
- *		The eth_port_send API supports Scatter-Gather which enables to
- *		send a packet spanned over multiple buffers. This means that
- *		for each packet info structure given by the user and put into
- *		the Tx descriptors ring, will be transmitted only if the 'LAST'
- *		bit will be set in the packet info command status field. This
- *		API also consider restriction regarding buffer alignments and
- *		sizes.
- *		The user must return a Tx resource after ensuring the buffer
- *		has been transmitted to enable the Tx ring indexes to update.
- *
- *		BOARD LAYOUT
- *		This device is on-board.  No jumper diagram is necessary.
- *
- *		EXTERNAL INTERFACE
- *
- *       Prior to calling the initialization routine eth_port_init() the user
- *	 must set the following fields under ETH_PORT_INFO struct:
- *       port_num             User Ethernet port number.
- *       port_phy_addr		    User PHY address of Ethernet port.
- *       port_mac_addr[6]	    User defined port MAC address.
- *       port_config          User port configuration value.
- *       port_config_extend    User port config extend value.
- *       port_sdma_config      User port SDMA config value.
- *       port_serial_control   User port serial control value.
- *       *port_virt_to_phys ()  User function to cast virtual addr to CPU bus addr.
- *       *port_private        User scratch pad for user specific data structures.
- *
- *       This driver introduce a set of default values:
- *       PORT_CONFIG_VALUE           Default port configuration value
- *       PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
- *       PORT_SDMA_CONFIG_VALUE      Default sdma control value
- *       PORT_SERIAL_CONTROL_VALUE   Default port serial control value
- *
- *		This driver data flow is done using the PKT_INFO struct which is
- *		a unified struct for Rx and Tx operations:
- *		byte_cnt	Tx/Rx descriptor buffer byte count.
- *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
- *		cmd_sts		Tx/Rx descriptor command status.
- *		buf_ptr		Tx/Rx descriptor buffer pointer.
- *		return_info	Tx/Rx user resource return information.
- *
- *
- *		EXTERNAL SUPPORT REQUIREMENTS
- *
- *		This driver requires the following external support:
- *
- *		D_CACHE_FLUSH_LINE (address, address offset)
- *
- *		This macro applies assembly code to flush and invalidate cache
- *		line.
- *		address        - address base.
- *		address offset - address offset
- *
- *
- *		CPU_PIPE_FLUSH
- *
- *		This macro applies assembly code to flush the CPU pipeline.
- *
- *******************************************************************************/
-/* includes */
-
-/* defines */
-/* SDMA command macros */
-#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
-
-#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
- (1 << (8 + tx_queue)))
-
-#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
-
-#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
-
-#define CURR_RFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
-
-#define CURR_RFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_RFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
-
-#define USED_RFD_SET(p_used_desc, queue)\
-(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
-
-
-#define CURR_TFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
-
-#define CURR_TFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_TFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
-
-#define USED_TFD_SET(p_used_desc, queue) \
- (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
-
-#define FIRST_TFD_GET(p_first_desc, queue) \
- ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
-
-#define FIRST_TFD_SET(p_first_desc, queue) \
- (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
-
-
-/* Macros that save access to desc in order to find next desc pointer  */
-#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
-
-#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
-
-#define LINK_UP_TIMEOUT		100000
-#define PHY_BUSY_TIMEOUT    10000000
-
-/* locals */
-
-/* PHY routines */
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
-static int ethernet_phy_get (ETH_PORT eth_port_num);
-
-/* Ethernet Port routines */
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param);
-static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option);
-
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count);
-
-void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
-
-
-typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
-u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64360_CS_0_BASE_ADDR);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64360_CS_1_BASE_ADDR);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64360_CS_2_BASE_ADDR);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64360_CS_3_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_dram_bank_size (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64360_CS_0_SIZE);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64360_CS_1_SIZE);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64360_CS_2_SIZE);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64360_CS_3_SIZE);
-	result += 1;
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_internal_sram_base (void)
-{
-	u32 result;
-
-	result = MV_REG_READ (MV64360_INTEGRATED_SRAM_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-/*******************************************************************************
-* eth_port_init - Initialize the Ethernet port driver
-*
-* DESCRIPTION:
-*       This function prepares the ethernet port to start its activity:
-*       1) Completes the ethernet port driver struct initialization toward port
-*           start routine.
-*       2) Resets the device to a quiescent state in case of warm reboot.
-*       3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
-*       4) Clean MAC tables. The reset status of those tables is unknown.
-*       5) Set PHY address.
-*       Note: Call this routine prior to eth_port_start routine and after setting
-*       user values in the user fields of Ethernet port control struct (i.e.
-*       port_phy_addr).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       See description.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	ETH_WIN_PARAM win_param;
-
-	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
-	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
-	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
-	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
-
-	p_eth_port_ctrl->port_rx_queue_command = 0;
-	p_eth_port_ctrl->port_tx_queue_command = 0;
-
-	/* Zero out SW structs */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->rx_resource_err[queue] = false;
-	}
-
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->tx_resource_err[queue] = false;
-	}
-
-	eth_port_reset (p_eth_port_ctrl->port_num);
-
-	/* Set access parameters for DRAM bank 0 */
-	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR  */
-	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
-	win_param.size = mv_get_dram_bank_size (BANK0);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 1 */
-	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
-	win_param.size = mv_get_dram_bank_size (BANK1);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 2 */
-	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
-	win_param.size = mv_get_dram_bank_size (BANK2);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 3 */
-	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
-	win_param.size = mv_get_dram_bank_size (BANK3);	/* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for Internal SRAM */
-	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
-	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
-	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
-	win_param.high_addr = 0;
-	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
-	win_param.size = MV64360_INTERNAL_SRAM_SIZE;	/* Get bank size */
-	win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
-
-	ethernet_phy_set (p_eth_port_ctrl->port_num,
-			  p_eth_port_ctrl->port_phy_addr);
-
-	return;
-
-}
-
-/*******************************************************************************
-* eth_port_start - Start the Ethernet port activity.
-*
-* DESCRIPTION:
-*       This routine prepares the Ethernet port for Rx and Tx activity:
-*       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
-*           has been initialized a descriptor's ring (using ether_init_tx_desc_ring
-*           for Tx and ether_init_rx_desc_ring for Rx)
-*       2. Initialize and enable the Ethernet configuration port by writing to
-*           the port's configuration and command registers.
-*       3. Initialize and enable the SDMA by writing to the SDMA's
-*    configuration and command registers.
-*       After completing these steps, the ethernet port SDMA can starts to
-*       perform Rx and Tx activities.
-*
-*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
-*       to calling this function (use ether_init_tx_desc_ring for Tx queues and
-*       ether_init_rx_desc_ring for Rx queues).
-*
-* INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*       Ethernet port is ready to receive and transmit.
-*
-* RETURN:
-*       false if the port PHY is not up.
-*       true otherwise.
-*
-*******************************************************************************/
-static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	unsigned int phy_reg_data;
-	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
-
-
-	/* Assignment of Tx CTRP of given queue */
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_GET (p_tx_curr_desc, queue);
-		MV_REG_WRITE ((MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_tx_curr_desc));
-
-	}
-
-	/* Assignment of Rx CRDP of given queue */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_GET (p_rx_curr_desc, queue);
-		MV_REG_WRITE ((MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_rx_curr_desc));
-
-		if (p_rx_curr_desc != NULL)
-			/* Add the assigned Ethernet address to the port's address table */
-			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
-					      p_eth_port_ctrl->port_mac_addr,
-					      queue);
-	}
-
-	/* Assign port configuration and command. */
-	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config);
-
-	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config_extend);
-
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      p_eth_port_ctrl->port_serial_control);
-
-	MV_SET_REG_BITS (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-			 ETH_SERIAL_PORT_ENABLE);
-
-	/* Assign port SDMA configuration */
-	MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_sdma_config);
-
-	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
-		      (eth_port_num), 0x3fffffff);
-	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
-		      (eth_port_num), 0x03fffcff);
-	/* Turn off the port/queue bandwidth limitation */
-	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
-
-	/* Enable port Rx. */
-	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_rx_queue_command);
-
-	/* Check if link is up */
-	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-	if (!(phy_reg_data & 0x20))
-		return false;
-
-	return true;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr_set - This function Set the port Unicast address.
-*
-* DESCRIPTION:
-*		This function Set the port Ethernet MAC address.
-*
-* INPUT:
-*	ETH_PORT eth_port_num     Port number.
-*	char *        p_addr		Address to be set
-*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
-*
-* OUTPUT:
-*	Set MAC address low and high registers. also calls eth_port_uc_addr()
-*       To set the unicast table with the proper information.
-*
-* RETURN:
-*	N/A.
-*
-*******************************************************************************/
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr, ETH_QUEUE queue)
-{
-	unsigned int mac_h;
-	unsigned int mac_l;
-
-	mac_l = (p_addr[4] << 8) | (p_addr[5]);
-	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
-		(p_addr[2] << 8) | (p_addr[3] << 0);
-
-	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
-	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
-
-	/* Accept frames of this address */
-	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
-
-	return;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr - This function Set the port unicast address table
-*
-* DESCRIPTION:
-*	This function locates the proper entry in the Unicast table for the
-*	specified MAC nibble and sets its properties according to function
-*	parameters.
-*
-* INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char uc_nibble		Unicast MAC Address last nibble.
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
-*
-* OUTPUT:
-*	This function add/removes MAC addresses from the port unicast address
-*	table.
-*
-* RETURN:
-*	true is output succeeded.
-*	false if option parameter is invalid.
-*
-*******************************************************************************/
-static bool eth_port_uc_addr (ETH_PORT eth_port_num,
-			      unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option)
-{
-	unsigned int unicast_reg;
-	unsigned int tbl_offset;
-	unsigned int reg_offset;
-
-	/* Locate the Unicast table entry */
-	uc_nibble = (0xf & uc_nibble);
-	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
-	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
-
-	switch (option) {
-	case REJECT_MAC_ADDR:
-		/* Clear accepts frame bit at specified unicast DA table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg &= (0x0E << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-		break;
-
-	case ACCEPT_MAC_ADDR:
-		/* Set accepts frame bit at unicast DA filter table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-
-		break;
-
-	default:
-		return false;
-	}
-	return true;
-}
-
-
-/*******************************************************************************
-* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
-*
-* DESCRIPTION:
-*       Go through all the DA filter tables (Unicast, Special Multicast & Other
-*       Multicast) and set each entry to 0.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Multicast and Unicast packets are rejected.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
-{
-	int table_index;
-
-	/* Clear DA filter unicast table (Ex_dFUT) */
-	for (table_index = 0; table_index <= 0xC; table_index += 4)
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num) + table_index), 0);
-
-	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
-		/* Clear DA filter special multicast table (Ex_dFSMT) */
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-		/* Clear DA filter other multicast table (Ex_dFOMT) */
-		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-	}
-}
-
-/*******************************************************************************
-* eth_clear_mib_counters - Clear all MIB counters
-*
-* DESCRIPTION:
-*       This function clears all MIB counters of a specific ethernet port.
-*       A read from the MIB counter will reset the counter.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       After reading all MIB counters, the counters resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-static void eth_clear_mib_counters (ETH_PORT eth_port_num)
-{
-	int i;
-	unsigned int dummy;
-
-	/* Perform dummy reads from MIB counters */
-	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
-	     i += 4)
-		dummy = MV_REG_READ ((MV64360_ETH_MIB_COUNTERS_BASE
-				      (eth_port_num) + i));
-
-	return;
-}
-
-/*******************************************************************************
-* eth_read_mib_counter - Read a MIB counter
-*
-* DESCRIPTION:
-*       This function reads a MIB counter of a specific ethernet port.
-*       NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
-*       following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
-*       register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
-*       ETH_MIB_GOOD_OCTETS_SENT_HIGH
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*       unsigned int mib_offset   MIB counter offset (use ETH_MIB_... macros).
-*
-* OUTPUT:
-*       After reading the MIB counter, the counter resets.
-*
-* RETURN:
-*       MIB counter value.
-*
-*******************************************************************************/
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset)
-{
-	return (MV_REG_READ (MV64360_ETH_MIB_COUNTERS_BASE (eth_port_num)
-			     + mib_offset));
-}
-
-/*******************************************************************************
-* ethernet_phy_set - Set the ethernet port PHY address.
-*
-* DESCRIPTION:
-*       This routine set the ethernet port PHY address according to given
-*       parameter.
-*
-* INPUT:
-*		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*       Set PHY Address Register with given PHY address parameter.
-*
-* RETURN:
-*       None.
-*
-*******************************************************************************/
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
-
-	reg_data &= ~(0x1F << (5 * eth_port_num));
-	reg_data |= (phy_addr << (5 * eth_port_num));
-
-	MV_REG_WRITE (MV64360_ETH_PHY_ADDR_REG, reg_data);
-
-	return;
-}
-
-/*******************************************************************************
- * ethernet_phy_get - Get the ethernet port PHY address.
- *
- * DESCRIPTION:
- *       This routine returns the given ethernet port PHY address.
- *
- * INPUT:
- *		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       None.
- *
- * RETURN:
- *       PHY address.
- *
- *******************************************************************************/
-static int ethernet_phy_get (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
-
-	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
-}
-
-/*******************************************************************************
- * ethernet_phy_reset - Reset Ethernet port PHY.
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to reset the ethernet port PHY.
- *       The routine waits until the link is up again or link up is timeout.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       The ethernet port PHY renew its link.
- *
- * RETURN:
- *       None.
- *
-*******************************************************************************/
-static bool ethernet_phy_reset (ETH_PORT eth_port_num)
-{
-	unsigned int time_out = 50;
-	unsigned int phy_reg_data;
-
-	/* Reset the PHY */
-	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
-	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
-	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
-
-	/* Poll on the PHY LINK */
-	do {
-		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-		if (time_out-- == 0)
-			return false;
-	}
-	while (!(phy_reg_data & 0x20));
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_reset - Reset Ethernet port
- *
- * DESCRIPTION:
- * 	This routine resets the chip by aborting any SDMA engine activity and
- *      clearing the MIB counters. The Receiver and the Transmit unit are in
- *      idle state after this command is performed and the port is disabled.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *       Channel activity is halted.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_port_reset (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	/* Stop Tx port activity. Check port Tx activity. */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Tx activity to terminate. */
-		do {
-			/* Check port cause register that all Tx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-	/* Stop Rx port activity. Check port Rx activity. */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Rx activity to terminate. */
-		do {
-			/* Check port cause register that all Rx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-
-	/* Clear all MIB counters */
-	eth_clear_mib_counters (eth_port_num);
-
-	/* Reset the Enable bit in the Configuration Register */
-	reg_data =
-		MV_REG_READ (MV64360_ETH_PORT_SERIAL_CONTROL_REG
-			     (eth_port_num));
-	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
-	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      reg_data);
-
-	return;
-}
-
-
-
-
-/*******************************************************************************
- * eth_port_read_smi_reg - Read PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform PHY register read.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       unsigned int   phy_reg   PHY register address offset.
- *       unsigned int   *value   Register value buffer.
- *
- * OUTPUT:
- *       Write the value of a specified PHY register into given buffer.
- *
- * RETURN:
- *       false if the PHY is busy or read data is not in valid state.
- *       true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
-				   unsigned int phy_reg, unsigned int *value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-/*    printf("     Phy-Port %d has addess %d  \n",eth_port_num, phy_addr );*/
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-
-	MV_REG_WRITE (MV64360_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_READ);
-
-	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
-
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID);	/* Bit set equ operation done */
-
-	/* Wait for the data to update in the SMI register */
-#define PHY_UPDATE_TIMEOUT	10000
-	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
-
-	reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-
-	*value = reg_value & 0xffff;
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_write_smi_reg - Write to PHY registers
- *
- * DESCRIPTION:
- *       This routine utilize the SMI interface to interact with the PHY in
- *       order to perform writes to PHY registers.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *      unsigned int   phy_reg   PHY register address offset.
- *      unsigned int    value   Register value.
- *
- * OUTPUT:
- *      Write the given value to the specified PHY register.
- *
- * RETURN:
- *      false if the PHY is busy.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
-				    unsigned int phy_reg, unsigned int value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64360_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-	return true;
-}
-
-/*******************************************************************************
- * eth_set_access_control - Config address decode parameters for Ethernet unit
- *
- * DESCRIPTION:
- *       This function configures the address decode parameters for the Gigabit
- *       Ethernet Controller according the given parameters struct.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
- *       ETH_WIN_PARAM  *param   Address decode parameter struct.
- *
- * OUTPUT:
- *       An access window is opened using the given access parameters.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param)
-{
-	unsigned int access_prot_reg;
-
-	/* Set access control register */
-	access_prot_reg = MV_REG_READ (MV64360_ETH_ACCESS_PROTECTION_REG
-				       (eth_port_num));
-	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
-	access_prot_reg |= (param->access_ctrl << (param->win * 2));
-	MV_REG_WRITE (MV64360_ETH_ACCESS_PROTECTION_REG (eth_port_num),
-		      access_prot_reg);
-
-	/* Set window Size reg (SR) */
-	MV_REG_WRITE ((MV64360_ETH_SIZE_REG_0 +
-		       (ETH_SIZE_REG_GAP * param->win)),
-		      (((param->size / 0x10000) - 1) << 16));
-
-	/* Set window Base address reg (BA) */
-	MV_REG_WRITE ((MV64360_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
-		      (param->target | param->attributes | param->base_addr));
-	/* High address remap reg (HARR) */
-	if (param->win < 4)
-		MV_REG_WRITE ((MV64360_ETH_HIGH_ADDR_REMAP_REG_0 +
-			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
-			      param->high_addr);
-
-	/* Base address enable reg (BARER) */
-	if (param->enable == 1)
-		MV_RESET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
-				   (1 << param->win));
-	else
-		MV_SET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
-				 (1 << param->win));
-}
-
-/*******************************************************************************
- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Rx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      int 			rx_desc_num       Number of Rx descriptors
- *      int 			rx_buff_size      Size of Rx buffer
- *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
- *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Rx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE rx_queue,
-				     int rx_desc_num,
-				     int rx_buff_size,
-				     unsigned int rx_desc_base_addr,
-				     unsigned int rx_buff_base_addr)
-{
-	ETH_RX_DESC *p_rx_desc;
-	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
-	p_rx_prev_desc = p_rx_desc;
-	buffer_addr = rx_buff_base_addr;
-
-	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (rx_buff_base_addr & 0xF)
-		return false;
-
-	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
-		return false;
-
-	/* Rx buffers must be 64-bit aligned.       */
-	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
-		return false;
-
-	/* initialize the Rx descriptors ring */
-	for (ix = 0; ix < rx_desc_num; ix++) {
-		p_rx_desc->buf_size = rx_buff_size;
-		p_rx_desc->byte_cnt = 0x0000;
-		p_rx_desc->cmd_sts =
-			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-		p_rx_desc->next_desc_ptr =
-			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
-		p_rx_desc->buf_ptr = buffer_addr;
-		p_rx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
-		buffer_addr += rx_buff_size;
-		p_rx_prev_desc = p_rx_desc;
-		p_rx_desc = (ETH_RX_DESC *)
-			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
-	}
-
-	/* Closing Rx descriptors ring */
-	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
-	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
-
-	/* Save Rx desc pointer to driver struct. */
-	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-
-	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
-		(ETH_RX_DESC *) rx_desc_base_addr;
-	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
-		rx_desc_num * RX_DESC_ALIGNED_SIZE;
-
-	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *       This function prepares a Tx chained list of descriptors and packet
- *       buffers in a form of a ring. The routine must be called after port
- *       initialization routine and before port start routine.
- *       The Ethernet SDMA engine uses CPU bus addresses to access the various
- *       devices in the system (i.e. DRAM). This function uses the ethernet
- *       struct 'virtual to physical' routine (set by the user) to set the ring
- *       with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *      int 			tx_desc_num       Number of Tx descriptors
- *      int 			tx_buff_size      Size of Tx buffer
- *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
- *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
- *
- * OUTPUT:
- *      The routine updates the Ethernet port control struct with information
- *      regarding the Tx descriptors and buffers.
- *
- * RETURN:
- *      false if the given descriptors memory area is not aligned according to
- *      Ethernet SDMA specifications.
- *      true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE tx_queue,
-				     int tx_desc_num,
-				     int tx_buff_size,
-				     unsigned int tx_desc_base_addr,
-				     unsigned int tx_buff_base_addr)
-{
-
-	ETH_TX_DESC *p_tx_desc;
-	ETH_TX_DESC *p_tx_prev_desc;
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-
-	/* save the first desc pointer to link with the last descriptor */
-	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
-	p_tx_prev_desc = p_tx_desc;
-	buffer_addr = tx_buff_base_addr;
-
-	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (tx_buff_base_addr & 0xF)
-		return false;
-
-	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
-	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
-		return false;
-
-	/* Initialize the Tx descriptors ring */
-	for (ix = 0; ix < tx_desc_num; ix++) {
-		p_tx_desc->byte_cnt = 0x0000;
-		p_tx_desc->l4i_chk = 0x0000;
-		p_tx_desc->cmd_sts = 0x00000000;
-		p_tx_desc->next_desc_ptr =
-			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
-
-		p_tx_desc->buf_ptr = buffer_addr;
-		p_tx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
-		buffer_addr += tx_buff_size;
-		p_tx_prev_desc = p_tx_desc;
-		p_tx_desc = (ETH_TX_DESC *)
-			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
-
-	}
-	/* Closing Tx descriptors ring */
-	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
-	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
-	/* Set Tx desc pointer in driver struct. */
-	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-
-	/* Init Tx ring base and size parameters */
-	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
-		(ETH_TX_DESC *) tx_desc_base_addr;
-	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
-		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
-
-	/* Add the queue to the list of Tx queues of this port */
-	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_send - Send an Ethernet packet
- *
- * DESCRIPTION:
- *	This routine send a given packet described by p_pktinfo parameter. It
- *      supports transmitting of a packet spaned over multiple buffers. The
- *      routine updates 'curr' and 'first' indexes according to the packet
- *      segment passed to the routine. In case the packet segment is first,
- *      the 'first' index is update. In any case, the 'curr' index is updated.
- *      If the routine get into Tx resource error it assigns 'curr' index as
- *      'first'. This way the function can abort Tx process of multiple
- *      descriptors per packet.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'curr' and 'first' indexes are updated.
- *
- * RETURN:
- *      ETH_QUEUE_FULL in case of Tx resource error.
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
-					  ETH_QUEUE tx_queue,
-					  PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_first;
-	volatile ETH_TX_DESC *p_tx_desc_curr;
-	volatile ETH_TX_DESC *p_tx_next_desc_curr;
-	volatile ETH_TX_DESC *p_tx_desc_used;
-	unsigned int command_status;
-
-	/* Do not process Tx ring in case of Tx ring resource error */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		return ETH_QUEUE_FULL;
-
-	/* Get the Tx Desc ring indexes */
-	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-
-	if (p_tx_desc_curr == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
-	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
-
-	if (command_status & (ETH_TX_FIRST_DESC)) {
-		/* Update first desc */
-		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
-		p_tx_desc_first = p_tx_desc_curr;
-	} else {
-		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-		command_status |= ETH_BUFFER_OWNED_BY_DMA;
-	}
-
-	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
-	/* boundary. We use the memory allocated for Tx descriptor. This memory  */
-	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
-	if (p_pkt_info->byte_cnt <= 8) {
-		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
-		return ETH_ERROR;
-
-		p_tx_desc_curr->buf_ptr =
-			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
-		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
-			    p_pkt_info->byte_cnt);
-	} else
-		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
-
-	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
-	p_tx_desc_curr->return_info = p_pkt_info->return_info;
-
-	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
-		/* Set last desc with DMA ownership and interrupt enable. */
-		p_tx_desc_curr->cmd_sts = command_status |
-			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
-
-		if (p_tx_desc_curr != p_tx_desc_first)
-			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
-
-		/* Flush CPU pipe */
-
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
-		CPU_PIPE_FLUSH;
-
-		/* Apply send command */
-		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
-
-		/* Finish Tx packet. Update first desc in case of Tx resource error */
-		p_tx_desc_first = p_tx_next_desc_curr;
-		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
-
-	} else {
-		p_tx_desc_curr->cmd_sts = command_status;
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-	}
-
-	/* Check for ring index overlap in the Tx desc ring */
-	if (p_tx_next_desc_curr == p_tx_desc_used) {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_desc_first, tx_queue);
-
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
-		return ETH_QUEUE_LAST_RESOURCE;
-	} else {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
-		return ETH_OK;
-	}
-}
-
-/*******************************************************************************
- * eth_tx_return_desc - Free all used Tx descriptors
- *
- * DESCRIPTION:
- *	This routine returns the transmitted packet information to the caller.
- *      It uses the 'first' index to support Tx desc return in case a transmit
- *      of a packet spanned over multiple buffer still in process.
- *      In case the Tx queue was in "resource error" condition, where there are
- *      no available Tx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'first' and 'used' indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *      ETH_RETRY in case there is transmission in process.
- *	ETH_END_OF_JOB if the routine has nothing to release.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE tx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
-	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
-	unsigned int command_status;
-
-
-	/* Get the Tx Desc ring indexes */
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-
-
-	/* Sanity check */
-	if (p_tx_desc_used == NULL)
-		return ETH_ERROR;
-
-	command_status = p_tx_desc_used->cmd_sts;
-
-	/* Still transmitting... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_RETRY;
-	}
-
-	/* Stop release. About to overlap the current available Tx descriptor */
-	if ((p_tx_desc_used == p_tx_desc_first) &&
-	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_END_OF_JOB;
-	}
-
-	/* Pass the packet information to the caller */
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->return_info = p_tx_desc_used->return_info;
-	p_tx_desc_used->return_info = 0;
-
-	/* Update the next descriptor to release. */
-	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
-
-	/* Any Tx return cancels the Tx resource error status */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-
-	return ETH_OK;
-
-}
-
-/*******************************************************************************
- * eth_port_receive - Get received information from Rx ring.
- *
- * DESCRIPTION:
- * 	This routine returns the received data to the caller. There is no
- *	data copying during routine operation. All information is returned
- *	using pointer to packet information struct passed from the caller.
- *      If the routine exhausts	Rx ring resources then the resource error flag
- *      is set.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *	PKT_INFO        *p_pkt_info       User packet buffer.
- *
- * OUTPUT:
- *	Rx ring current and used indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
- *	ETH_END_OF_JOB if there is no received data.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_next_curr_desc;
-	volatile ETH_RX_DESC *p_rx_used_desc;
-	unsigned int command_status;
-
-	/* Do not process Rx ring in case of Rx ring resource error */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
-		printf ("\nRx Queue is full ...\n");
-		return ETH_QUEUE_FULL;
-	}
-
-	/* Get the Rx Desc ring 'curr and 'used' indexes */
-	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
-	USED_RFD_GET (p_rx_used_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_rx_curr_desc == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
-	command_status = p_rx_curr_desc->cmd_sts;
-
-	/* Nothing to receive... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
-		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
-		return ETH_END_OF_JOB;
-	}
-
-	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
-	p_pkt_info->return_info = p_rx_curr_desc->return_info;
-	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size;	/* IP fragment indicator */
-
-	/* Clean the return info field to indicate that the packet has been */
-	/* moved to the upper layers                                        */
-	p_rx_curr_desc->return_info = 0;
-
-	/* Update 'curr' in data structure */
-	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
-
-	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
-	if (p_rx_next_curr_desc == p_rx_used_desc)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-	CPU_PIPE_FLUSH;
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
- *
- * DESCRIPTION:
- *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
- *      next 'used' descriptor and attached the returned buffer to it.
- *      In case the Rx ring was in "resource error" condition, where there are
- *      no available Rx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
- *
- * OUTPUT:
- *	New available Rx resource in Rx descriptor ring.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *      ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE rx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
-
-	/* Get 'used' Rx descriptor */
-	USED_RFD_GET (p_used_rx_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_used_rx_desc == NULL)
-		return ETH_ERROR;
-
-	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
-	p_used_rx_desc->return_info = p_pkt_info->return_info;
-	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
-	p_used_rx_desc->buf_size = MV64360_RX_BUFFER_SIZE;	/* Reset Buffer size */
-
-	/* Flush the write pipe */
-	CPU_PIPE_FLUSH;
-
-	/* Return the descriptor to DMA ownership */
-	p_used_rx_desc->cmd_sts =
-		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-
-	/* Flush descriptor and CPU pipe */
-	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
-	CPU_PIPE_FLUSH;
-
-	/* Move the used descriptor pointer to the next descriptor */
-	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
-
-	/* Any Rx return cancels the Rx resource error status */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
-
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
- *
- * DESCRIPTION:
- *	This routine sets the RX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the tClk of the MV-643xx chip
- *	, and the required delay of the interrupt in usec.
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in usec
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-/*******************************************************************************
- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
- *
- * DESCRIPTION:
- *	This routine sets the TX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the t_cLK frequency of the
- *	MV-643xx chip and the required delay in the interrupt in uSec
- *
- * INPUT:
- *	ETH_PORT eth_port_num      Ethernet port number
- *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay       Delay in uSeconds
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-
-/*******************************************************************************
- * eth_b_copy - Copy bytes from source to destination
- *
- * DESCRIPTION:
- *       This function supports the eight bytes limitation on Tx buffer size.
- *       The routine will zero eight bytes starting from the destination address
- *       followed by copying bytes from the source address to the destination.
- *
- * INPUT:
- *       unsigned int src_addr    32 bit source address.
- *       unsigned int dst_addr    32 bit destination address.
- *       int        byte_count    Number of bytes to copy.
- *
- * OUTPUT:
- *       See description.
- *
- * RETURN:
- *       None.
- *
- *******************************************************************************/
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count)
-{
-	/* Zero the dst_addr area */
-	*(unsigned int *) dst_addr = 0x0;
-
-	while (byte_count != 0) {
-		*(char *) dst_addr = *(char *) src_addr;
-		dst_addr++;
-		src_addr++;
-		byte_count--;
-	}
-}
diff --git a/board/esd/cpci750/mv_eth.h b/board/esd/cpci750/mv_eth.h
deleted file mode 100644
index 409bf70bf8..0000000000
--- a/board/esd/cpci750/mv_eth.h
+++ /dev/null
@@ -1,838 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __DB64360_ETH_H__
-#define __DB64360_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-#include <net.h>
-#include "mv_regs.h"
-#include "../../Marvell/common/ppc_error_no.h"
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
-#ifndef MAX_SKB_FRAGS
-#define MAX_SKB_FRAGS 0
-#endif
-
-/* Port attributes */
-/*#define MAX_RX_QUEUE_NUM	8*/
-/*#define MAX_TX_QUEUE_NUM	8*/
-#define MAX_RX_QUEUE_NUM	1
-#define MAX_TX_QUEUE_NUM	1
-
-
-/* Use one TX queue and one RX queue */
-#define MV64360_TX_QUEUE_NUM 1
-#define MV64360_RX_QUEUE_NUM 1
-
-/*
- * Number of RX / TX descriptors on RX / TX rings.
- * Note that allocating RX descriptors is done by allocating the RX
- * ring AND a preallocated RX buffers (skb's) for each descriptor.
- * The TX descriptors only allocates the TX descriptors ring,
- * with no pre allocated TX buffers (skb's are allocated by higher layers.
- */
-
-/* Default TX ring size is 10 descriptors */
-#ifdef CONFIG_MV64360_ETH_TXQUEUE_SIZE
-#define MV64360_TX_QUEUE_SIZE CONFIG_MV64360_ETH_TXQUEUE_SIZE
-#else
-#define MV64360_TX_QUEUE_SIZE 4
-#endif
-
-/* Default RX ring size is 4 descriptors */
-#ifdef	CONFIG_MV64360_ETH_RXQUEUE_SIZE
-#define MV64360_RX_QUEUE_SIZE CONFIG_MV64360_ETH_RXQUEUE_SIZE
-#else
-#define MV64360_RX_QUEUE_SIZE 4
-#endif
-
-#ifdef CONFIG_RX_BUFFER_SIZE
-#define MV64360_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
-#else
-#define MV64360_RX_BUFFER_SIZE 1600
-#endif
-
-#ifdef CONFIG_TX_BUFFER_SIZE
-#define MV64360_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
-#else
-#define MV64360_TX_BUFFER_SIZE 1600
-#endif
-
-
-/*
- *	Network device statistics. Akin to the 2.0 ether stats but
- *	with byte counters.
- */
-
-struct net_device_stats
-{
-	unsigned long	rx_packets;		/* total packets received	*/
-	unsigned long	tx_packets;		/* total packets transmitted	*/
-	unsigned long	rx_bytes;		/* total bytes received		*/
-	unsigned long	tx_bytes;		/* total bytes transmitted	*/
-	unsigned long	rx_errors;		/* bad packets received		*/
-	unsigned long	tx_errors;		/* packet transmit problems	*/
-	unsigned long	rx_dropped;		/* no space in linux buffers	*/
-	unsigned long	tx_dropped;		/* no space available in linux	*/
-	unsigned long	multicast;		/* multicast packets received	*/
-	unsigned long	collisions;
-
-	/* detailed rx_errors: */
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
-	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
-	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
-	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-
-	/* for cslip etc */
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
-};
-
-
-/* Private data structure used for ethernet device */
-struct mv64360_eth_priv {
-    unsigned int port_num;
-    struct net_device_stats *stats;
-
-/* to buffer area aligned */
-    char * p_eth_tx_buffer[MV64360_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
-    char * p_eth_rx_buffer[MV64360_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
-
-    /* Size of Tx Ring per queue */
-    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
-
-
-    /* Size of Rx Ring per queue */
-    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
-
-    /* Magic Number for Ethernet running */
-    unsigned int eth_running;
-
-};
-
-
-int mv64360_eth_init (struct eth_device *dev);
-int mv64360_eth_stop (struct eth_device *dev);
-int mv64360_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
-/*	return db64360_eth0_poll(); */
-
-int mv64360_eth_open (struct eth_device *dev);
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-
-/********************************************************************************
- * Header File for : MV-643xx network interface header
- *
- * DESCRIPTION:
- *	 This header file contains macros typedefs and function declaration for
- *	 the Marvell Gig Bit Ethernet Controller.
- *
- * DEPENDENCIES:
- *	 None.
- *
- *******************************************************************************/
-
-
-#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
-#ifdef CONFIG_MV64360_SRAM_CACHEABLE
-/* In case SRAM is cacheable but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case SRAM is cache coherent or non-cacheable */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif
-#else
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/* In case of descriptors on DDR but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case of descriptors on DDR and cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
-
-
-#define CPU_PIPE_FLUSH		   \
-{		  \
-  __asm__ __volatile__ ("eieio");	  \
-}
-
-
-/* defines  */
-
-/* Default port configuration value */
-#define PORT_CONFIG_VALUE			\
-	     ETH_UNICAST_NORMAL_MODE		|   \
-	     ETH_DEFAULT_RX_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
-	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
-	     ETH_RECEIVE_BC_IF_IP		|   \
-	     ETH_RECEIVE_BC_IF_ARP		|   \
-	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
-	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
-	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-/* Default port extend configuration value */
-#define PORT_CONFIG_EXTEND_VALUE		\
-	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
-	     ETH_PARTITION_DISABLE
-
-
-/* Default sdma control value */
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PORT_SDMA_CONFIG_VALUE				\
-			 ETH_RX_BURST_SIZE_16_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_16_64BIT;
-#else
-#define PORT_SDMA_CONFIG_VALUE			\
-			 ETH_RX_BURST_SIZE_4_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_4_64BIT;
-#endif
-
-#define GT_ETH_IPG_INT_RX(value)		\
-	    ((value & 0x3fff) << 8)
-
-/* Default port serial control value */
-#define PORT_SERIAL_CONTROL_VALUE			    \
-			ETH_FORCE_LINK_PASS			|	\
-			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-			ETH_FORCE_BP_MODE_NO_JAM		|	\
-			BIT9					|	\
-			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-			ETH_RETRANSMIT_16_ETTEMPTS		|	\
-			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-			ETH_DTE_ADV_0				|	\
-			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-			ETH_AUTO_NEG_NO_CHANGE			|	\
-			ETH_MAX_RX_PACKET_1552BYTE		|	\
-			ETH_CLR_EXT_LOOPBACK			|	\
-			ETH_SET_FULL_DUPLEX_MODE		|	\
-			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
-
-#define RX_BUFFER_MAX_SIZE  0xFFFF
-#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
-
-#define RX_BUFFER_MIN_SIZE  0x8
-#define TX_BUFFER_MIN_SIZE  0x8
-
-/* Tx WRR confoguration macros */
-#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
-#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
-#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
-
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR	    0
-#define REJECT_MAC_ADDR	    1
-
-/* Size of a Tx/Rx descriptor used in chain list data structure */
-#define RX_DESC_ALIGNED_SIZE		0x20
-#define TX_DESC_ALIGNED_SIZE		0x20
-
-/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
-#define TX_BUF_OFFSET_IN_DESC	    0x18
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET				0x2
-
-/* Gap define */
-#define ETH_BAR_GAP					0x8
-#define ETH_SIZE_REG_GAP				0x8
-#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
-#define ETH_PORT_ACCESS_CTRL_GAP			0x4
-
-/* Gigabit Ethernet Unit Global Registers */
-
-/* MIB Counters register definitions */
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
-#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
-#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
-#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
-#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
-#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
-#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
-#define ETH_MIB_FRAMES_64_OCTETS	   0x20
-#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
-#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
-#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
-#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
-#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
-#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
-#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
-#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
-#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
-#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
-#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
-#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
-#define ETH_MIB_FC_SENT			   0x54
-#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
-#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
-#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
-#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
-#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
-#define ETH_MIB_JABBER_RECEIVED		   0x6c
-#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
-#define ETH_MIB_BAD_CRC_EVENT		   0x74
-#define ETH_MIB_COLLISION		   0x78
-#define ETH_MIB_LATE_COLLISION		   0x7c
-
-/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_GMII_MII				0
-#define ETH_INTERFACE_PCM				BIT0
-#define ETH_LINK_IS_DOWN				0
-#define ETH_LINK_IS_UP					BIT1
-#define ETH_PORT_AT_HALF_DUPLEX				0
-#define ETH_PORT_AT_FULL_DUPLEX				BIT2
-#define ETH_RX_FLOW_CTRL_DISABLED			0
-#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
-#define ETH_GMII_SPEED_100_10				0
-#define ETH_GMII_SPEED_1000				BIT4
-#define ETH_MII_SPEED_10				0
-#define ETH_MII_SPEED_100				BIT5
-#define ETH_NO_TX					0
-#define ETH_TX_IN_PROGRESS				BIT7
-#define ETH_BYPASS_NO_ACTIVE				0
-#define ETH_BYPASS_ACTIVE				BIT8
-#define ETH_PORT_NOT_AT_PARTITION_STATE			0
-#define ETH_PORT_AT_PARTITION_STATE			BIT9
-#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
-#define ETH_PORT_TX_FIFO_EMPTY				BIT10
-
-
-/* These macros describes the Port configuration reg (Px_cR) bits */
-#define ETH_UNICAST_NORMAL_MODE				0
-#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
-#define ETH_DEFAULT_RX_QUEUE_0				0
-#define ETH_DEFAULT_RX_QUEUE_1				BIT1
-#define ETH_DEFAULT_RX_QUEUE_2				BIT2
-#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_4				BIT3
-#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
-#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
-#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
-#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
-#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
-#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
-#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
-#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
-#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
-#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
-#define ETH_RECEIVE_BC_IF_IP				0
-#define ETH_REJECT_BC_IF_IP				BIT8
-#define ETH_RECEIVE_BC_IF_ARP				0
-#define ETH_REJECT_BC_IF_ARP				BIT9
-#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
-#define ETH_CAPTURE_TCP_FRAMES_DIS			0
-#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
-#define ETH_CAPTURE_UDP_FRAMES_DIS			0
-#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
-#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
-#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
-#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
-#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
-#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
-#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
-#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
-#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
-#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
-#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
-#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
-#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
-#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
-#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
-#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
-#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
-
-
-/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define ETH_CLASSIFY_EN					BIT0
-#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
-#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
-#define ETH_PARTITION_DISABLE				0
-#define ETH_PARTITION_ENABLE				BIT2
-
-
-/* Tx/Rx queue command reg (RQCR/TQCR)*/
-#define ETH_QUEUE_0_ENABLE				BIT0
-#define ETH_QUEUE_1_ENABLE				BIT1
-#define ETH_QUEUE_2_ENABLE				BIT2
-#define ETH_QUEUE_3_ENABLE				BIT3
-#define ETH_QUEUE_4_ENABLE				BIT4
-#define ETH_QUEUE_5_ENABLE				BIT5
-#define ETH_QUEUE_6_ENABLE				BIT6
-#define ETH_QUEUE_7_ENABLE				BIT7
-#define ETH_QUEUE_0_DISABLE				BIT8
-#define ETH_QUEUE_1_DISABLE				BIT9
-#define ETH_QUEUE_2_DISABLE				BIT10
-#define ETH_QUEUE_3_DISABLE				BIT11
-#define ETH_QUEUE_4_DISABLE				BIT12
-#define ETH_QUEUE_5_DISABLE				BIT13
-#define ETH_QUEUE_6_DISABLE				BIT14
-#define ETH_QUEUE_7_DISABLE				BIT15
-
-
-/* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define ETH_RIFB					BIT0
-#define ETH_RX_BURST_SIZE_1_64BIT			0
-#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
-#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
-#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
-#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
-#define ETH_BLM_RX_NO_SWAP				BIT4
-#define ETH_BLM_RX_BYTE_SWAP				0
-#define ETH_BLM_TX_NO_SWAP				BIT5
-#define ETH_BLM_TX_BYTE_SWAP				0
-#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
-#define ETH_DESCRIPTORS_NO_SWAP				0
-#define ETH_TX_BURST_SIZE_1_64BIT			0
-#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
-#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
-#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
-#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
-
-
-/* These macros describes the Port serial control reg (PSCR) bits */
-#define ETH_SERIAL_PORT_DISABLE				0
-#define ETH_SERIAL_PORT_ENABLE				BIT0
-#define ETH_FORCE_LINK_PASS				BIT1
-#define ETH_DO_NOT_FORCE_LINK_PASS			0
-#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
-#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
-#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
-#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
-#define ETH_ADV_NO_FLOW_CTRL				0
-#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
-#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
-#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
-#define ETH_FORCE_BP_MODE_NO_JAM			0
-#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
-#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
-#define ETH_FORCE_LINK_FAIL				0
-#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
-#define ETH_RETRANSMIT_16_ETTEMPTS			0
-#define ETH_RETRANSMIT_FOREVER				BIT11
-#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
-#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
-#define ETH_DTE_ADV_0					0
-#define ETH_DTE_ADV_1					BIT14
-#define ETH_DISABLE_AUTO_NEG_BYPASS			0
-#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
-#define ETH_AUTO_NEG_NO_CHANGE				0
-#define ETH_RESTART_AUTO_NEG				BIT16
-#define ETH_MAX_RX_PACKET_1518BYTE			0
-#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
-#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
-#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
-#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
-#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
-#define ETH_SET_EXT_LOOPBACK				BIT20
-#define ETH_CLR_EXT_LOOPBACK				0
-#define ETH_SET_FULL_DUPLEX_MODE			BIT21
-#define ETH_SET_HALF_DUPLEX_MODE			0
-#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
-#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
-#define ETH_SET_GMII_SPEED_TO_10_100			0
-#define ETH_SET_GMII_SPEED_TO_1000			BIT23
-#define ETH_SET_MII_SPEED_TO_10				0
-#define ETH_SET_MII_SPEED_TO_100			BIT24
-
-
-/* SMI reg */
-#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
-#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
-
-/* SDMA command status fields macros */
-
-/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY		    (BIT0)
-
-/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
-
-/* Tx descriptors status */
-#define ETH_LC_ERROR			    (0	  )
-#define ETH_UR_ERROR			    (BIT1 )
-#define ETH_RL_ERROR			    (BIT2 )
-#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
-
-/* Rx descriptors status */
-#define ETH_CRC_ERROR			    (0	  )
-#define ETH_OVERRUN_ERROR		    (BIT1 )
-#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
-#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
-#define ETH_VLAN_TAGGED			    (BIT19)
-#define ETH_BPDU_FRAME			    (BIT20)
-#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
-#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
-#define ETH_OTHER_FRAME_TYPE		    (BIT22)
-#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
-#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
-#define ETH_FRAME_HEADER_OK		    (BIT25)
-#define ETH_RX_LAST_DESC		    (BIT26)
-#define ETH_RX_FIRST_DESC		    (BIT27)
-#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
-#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
-#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
-
-/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED		    (BIT2)
-
-/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
-#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
-#define ETH_TCP_FRAME			    (0	  )
-#define ETH_UDP_FRAME			    (BIT16)
-#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
-#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
-#define ETH_ZERO_PADDING		    (BIT19)
-#define ETH_TX_LAST_DESC		    (BIT20)
-#define ETH_TX_FIRST_DESC		    (BIT21)
-#define ETH_GEN_CRC			    (BIT22)
-#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
-#define ETH_AUTO_MODE			    (BIT30)
-
-/* Address decode parameters */
-/* Ethernet Base Address Register bits */
-#define EBAR_TARGET_DRAM					0x00000000
-#define EBAR_TARGET_DEVICE					0x00000001
-#define EBAR_TARGET_CBS						0x00000002
-#define EBAR_TARGET_PCI0					0x00000003
-#define EBAR_TARGET_PCI1					0x00000004
-#define EBAR_TARGET_CUNIT					0x00000005
-#define EBAR_TARGET_AUNIT					0x00000006
-#define EBAR_TARGET_GUNIT					0x00000007
-
-/* Window attributes */
-#define EBAR_ATTR_DRAM_CS0					0x00000E00
-#define EBAR_ATTR_DRAM_CS1					0x00000D00
-#define EBAR_ATTR_DRAM_CS2					0x00000B00
-#define EBAR_ATTR_DRAM_CS3					0x00000700
-
-/* DRAM Target interface */
-#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
-
-/* Device Bus Target interface */
-#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
-#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
-#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
-#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
-#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
-
-/* PCI Target interface */
-#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
-#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
-#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
-#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
-#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
-#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
-#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
-#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
-#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
-#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
-
-/* CPU 60x bus or internal SRAM interface */
-#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
-#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
-#define EBAR_ATTR_CBS_SRAM					0x00000000
-#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
-
-/* Window access control */
-#define EWIN_ACCESS_NOT_ALLOWED 0
-#define EWIN_ACCESS_READ_ONLY	BIT0
-#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
-#define EWIN0_ACCESS_MASK		0x0003
-#define EWIN1_ACCESS_MASK		0x000C
-#define EWIN2_ACCESS_MASK		0x0030
-#define EWIN3_ACCESS_MASK		0x00C0
-
-/* typedefs */
-
-typedef enum _eth_port
-{
-    ETH_0 = 0,
-	ETH_1 = 1,
-	ETH_2 = 2
-}ETH_PORT;
-
-typedef enum _eth_func_ret_status
-{
-    ETH_OK,			/* Returned as expected.		    */
-    ETH_ERROR,			/* Fundamental error.			    */
-    ETH_RETRY,			/* Could not process request. Try later.    */
-    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
-    ETH_QUEUE_FULL,		/* Ring resource error.			    */
-    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
-}ETH_FUNC_RET_STATUS;
-
-typedef enum _eth_queue
-{
-	ETH_Q0 = 0,
-	ETH_Q1 = 1,
-	ETH_Q2 = 2,
-	ETH_Q3 = 3,
-	ETH_Q4 = 4,
-	ETH_Q5 = 5,
-	ETH_Q6 = 6,
-    ETH_Q7 = 7
-} ETH_QUEUE;
-
-typedef enum _addr_win
-{
-	ETH_WIN0,
-	ETH_WIN1,
-	ETH_WIN2,
-	ETH_WIN3,
-	ETH_WIN4,
-    ETH_WIN5
-} ETH_ADDR_WIN;
-
-typedef enum _eth_target
-{
-	ETH_TARGET_DRAM	 ,
-	ETH_TARGET_DEVICE,
-	ETH_TARGET_CBS	 ,
-	ETH_TARGET_PCI0	 ,
-	ETH_TARGET_PCI1
-}ETH_TARGET;
-
-typedef struct _eth_rx_desc
-{
-	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
-	unsigned short	buf_size	   ;	/* Buffer size			    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_RX_DESC;
-
-
-typedef struct _eth_tx_desc
-{
-    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
-    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
-    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
-    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
-    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_TX_DESC;
-
-/* Unified struct for Rx and Tx operations. The user is not required to */
-/* be familier with neither Tx nor Rx descriptors.			 */
-typedef struct _pkt_info
-{
-	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
-	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} PKT_INFO;
-
-
-typedef struct _eth_win_param
-{
-    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
-    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
-    unsigned short attributes;	/* BAR attributes. See above macros. */
-    unsigned int base_addr; /* Window base address in unsigned int form */
-    unsigned int high_addr; /* Window high address in unsigned int form */
-    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
-    bool enable; /* Enable/disable access to the window. */
-    unsigned short access_ctrl; /* Access ctrl register. see above macros */
-} ETH_WIN_PARAM;
-
-
-/* Ethernet port specific infomation */
-
-typedef struct _eth_port_ctrl
-{
-    ETH_PORT  port_num; /* User Ethernet port number */
-    int port_phy_addr;	/* User phy address of Ethrnet port */
-    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
-    unsigned int  port_config; /* User port configuration value */
-    unsigned int  port_config_extend; /* User port config extend value */
-    unsigned int  port_sdma_config; /* User port SDMA config value */
-    unsigned int  port_serial_control; /* User port serial control value */
-    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
-    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
-
-    /* User function to cast virtual address to CPU bus address */
-    unsigned int  (*port_virt_to_phys)(unsigned int addr);
-    /* User scratch pad for user specific data structures */
-    void *port_private;
-
-    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
-    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
-
-    /* Tx/Rx rings managment indexes fields. For driver use */
-
-    /* Next available Rx resource */
-    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
-    /* Returning Rx resource */
-    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
-
-    /* Next available Tx resource */
-    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
-    /* Returning Tx resource */
-    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
-    /* An extra Tx index to support transmit of multiple buffers per packet */
-    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
-
-    /* Tx/Rx rings size and base variables fields. For driver use */
-
-    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
-    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
-    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
-
-    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
-    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
-    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
-
-} ETH_PORT_INFO;
-
-
-/* ethernet.h API list */
-
-/* Port operation control routines */
-static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
-static void eth_port_reset(ETH_PORT	eth_port_num);
-static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
-
-
-/* Port MAC address routines */
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr,
-				  ETH_QUEUE queue);
-
-/* PHY and MIB routines */
-static bool ethernet_phy_reset(ETH_PORT eth_port_num);
-
-static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
-				   unsigned int phy_reg,
-				   unsigned int value);
-
-static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
-				  unsigned int phy_reg,
-				  unsigned int* value);
-
-static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
-
-/* Port data flow control routines */
-static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE tx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE tx_queue,
-					      PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE rx_queue,
-					      PKT_INFO *p_pkt_info);
-
-
-static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	tx_queue,
-				    int				tx_desc_num,
-				    int				tx_buff_size,
-				    unsigned int	tx_desc_base_addr,
-				    unsigned int	tx_buff_base_addr);
-
-static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	rx_queue,
-				    int				rx_desc_num,
-				    int				rx_buff_size,
-				    unsigned int	rx_desc_base_addr,
-				    unsigned int	rx_buff_base_addr);
-
-#endif /* MV64360_ETH_ */
diff --git a/board/esd/cpci750/mv_regs.h b/board/esd/cpci750/mv_regs.h
deleted file mode 100644
index 0d6370b52c..0000000000
--- a/board/esd/cpci750/mv_regs.h
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/********************************************************************************
-* gt64360r.h - GT-64360 Internal registers definition file.
-*
-* DESCRIPTION:
-*	None.
-*
-* DEPENDENCIES:
-*	None.
-*
-*******************************************************************************/
-
-#ifndef __INCmv_regsh
-#define __INCmv_regsh
-
-#define MV64360
-
-/* Supported by the Atlantis */
-#define MV64360_INCLUDE_PCI_1
-#define MV64360_INCLUDE_PCI_0_ARBITER
-#define MV64360_INCLUDE_PCI_1_ARBITER
-#define MV64360_INCLUDE_SNOOP_SUPPORT
-#define MV64360_INCLUDE_P2P
-#define MV64360_INCLUDE_ETH_PORT_2
-#define MV64360_INCLUDE_CPU_MAPPING
-#define MV64360_INCLUDE_MPSC
-
-/* Not supported features */
-#undef	INCLUDE_CNTMR_4_7
-#undef	INCLUDE_DMA_4_7
-
-/****************************************/
-/* Processor Address Space		*/
-/****************************************/
-
-/* DDR SDRAM BAR and size registers */
-
-#define MV64360_CS_0_BASE_ADDR					    0x008
-#define MV64360_CS_0_SIZE					    0x010
-#define MV64360_CS_1_BASE_ADDR					    0x208
-#define MV64360_CS_1_SIZE					    0x210
-#define MV64360_CS_2_BASE_ADDR					    0x018
-#define MV64360_CS_2_SIZE					    0x020
-#define MV64360_CS_3_BASE_ADDR					    0x218
-#define MV64360_CS_3_SIZE					    0x220
-
-/* Devices BAR and size registers */
-
-#define MV64360_DEV_CS0_BASE_ADDR				    0x028
-#define MV64360_DEV_CS0_SIZE					    0x030
-#define MV64360_DEV_CS1_BASE_ADDR				    0x228
-#define MV64360_DEV_CS1_SIZE					    0x230
-#define MV64360_DEV_CS2_BASE_ADDR				    0x248
-#define MV64360_DEV_CS2_SIZE					    0x250
-#define MV64360_DEV_CS3_BASE_ADDR				    0x038
-#define MV64360_DEV_CS3_SIZE					    0x040
-#define MV64360_BOOTCS_BASE_ADDR				    0x238
-#define MV64360_BOOTCS_SIZE					    0x240
-
-/* PCI 0 BAR and size registers */
-
-#define MV64360_PCI_0_IO_BASE_ADDR				    0x048
-#define MV64360_PCI_0_IO_SIZE					    0x050
-#define MV64360_PCI_0_MEMORY0_BASE_ADDR				    0x058
-#define MV64360_PCI_0_MEMORY0_SIZE				    0x060
-#define MV64360_PCI_0_MEMORY1_BASE_ADDR				    0x080
-#define MV64360_PCI_0_MEMORY1_SIZE				    0x088
-#define MV64360_PCI_0_MEMORY2_BASE_ADDR				    0x258
-#define MV64360_PCI_0_MEMORY2_SIZE				    0x260
-#define MV64360_PCI_0_MEMORY3_BASE_ADDR				    0x280
-#define MV64360_PCI_0_MEMORY3_SIZE				    0x288
-
-/* PCI 1 BAR and size registers */
-#define MV64360_PCI_1_IO_BASE_ADDR				    0x090
-#define MV64360_PCI_1_IO_SIZE					    0x098
-#define MV64360_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
-#define MV64360_PCI_1_MEMORY0_SIZE				    0x0a8
-#define MV64360_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
-#define MV64360_PCI_1_MEMORY1_SIZE				    0x0b8
-#define MV64360_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
-#define MV64360_PCI_1_MEMORY2_SIZE				    0x2a8
-#define MV64360_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
-#define MV64360_PCI_1_MEMORY3_SIZE				    0x2b8
-
-/* SRAM base address */
-#define MV64360_INTEGRATED_SRAM_BASE_ADDR			    0x268
-
-/* internal registers space base address */
-#define MV64360_INTERNAL_SPACE_BASE_ADDR			    0x068
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1
-   windows above */
-#define MV64360_BASE_ADDR_ENABLE				    0x278
-
-/****************************************/
-/* PCI remap registers			*/
-/****************************************/
-      /* PCI 0 */
-#define MV64360_PCI_0_IO_ADDR_REMAP				    0x0f0
-#define MV64360_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
-#define MV64360_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
-#define MV64360_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
-#define MV64360_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
-#define MV64360_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
-#define MV64360_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
-#define MV64360_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
-#define MV64360_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
-      /* PCI 1 */
-#define MV64360_PCI_1_IO_ADDR_REMAP				    0x108
-#define MV64360_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
-#define MV64360_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
-#define MV64360_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
-#define MV64360_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
-#define MV64360_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
-#define MV64360_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
-#define MV64360_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
-#define MV64360_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
-
-#define MV64360_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
-#define MV64360_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
-#define MV64360_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
-#define MV64360_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
-#define MV64360_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
-#define MV64360_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
-#define MV64360_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
-#define MV64360_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
-
-/****************************************/
-/*	   CPU Control Registers	*/
-/****************************************/
-
-#define MV64360_CPU_CONFIG					    0x000
-#define MV64360_CPU_MODE					    0x120
-#define MV64360_CPU_MASTER_CONTROL				    0x160
-#define MV64360_CPU_CROSS_BAR_CONTROL_LOW			    0x150
-#define MV64360_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
-#define MV64360_CPU_CROSS_BAR_TIMEOUT				    0x168
-
-/****************************************/
-/* SMP RegisterS			*/
-/****************************************/
-
-#define MV64360_SMP_WHO_AM_I					    0x200
-#define MV64360_SMP_CPU0_DOORBELL				    0x214
-#define MV64360_SMP_CPU0_DOORBELL_CLEAR				    0x21C
-#define MV64360_SMP_CPU1_DOORBELL				    0x224
-#define MV64360_SMP_CPU1_DOORBELL_CLEAR				    0x22C
-#define MV64360_SMP_CPU0_DOORBELL_MASK				    0x234
-#define MV64360_SMP_CPU1_DOORBELL_MASK				    0x23C
-#define MV64360_SMP_SEMAPHOR0					    0x244
-#define MV64360_SMP_SEMAPHOR1					    0x24c
-#define MV64360_SMP_SEMAPHOR2					    0x254
-#define MV64360_SMP_SEMAPHOR3					    0x25c
-#define MV64360_SMP_SEMAPHOR4					    0x264
-#define MV64360_SMP_SEMAPHOR5					    0x26c
-#define MV64360_SMP_SEMAPHOR6					    0x274
-#define MV64360_SMP_SEMAPHOR7					    0x27c
-
-/****************************************/
-/*  CPU Sync Barrier Register		*/
-/****************************************/
-
-#define MV64360_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
-#define MV64360_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
-#define MV64360_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
-#define MV64360_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
-
-/****************************************/
-/* CPU Access Protect			*/
-/****************************************/
-
-#define MV64360_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
-#define MV64360_CPU_PROTECT_WINDOW_0_SIZE			    0x188
-#define MV64360_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
-#define MV64360_CPU_PROTECT_WINDOW_1_SIZE			    0x198
-#define MV64360_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
-#define MV64360_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
-#define MV64360_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
-#define MV64360_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
-
-
-/****************************************/
-/*	    CPU Error Report		*/
-/****************************************/
-
-#define MV64360_CPU_ERROR_ADDR_LOW				    0x070
-#define MV64360_CPU_ERROR_ADDR_HIGH				    0x078
-#define MV64360_CPU_ERROR_DATA_LOW				    0x128
-#define MV64360_CPU_ERROR_DATA_HIGH				    0x130
-#define MV64360_CPU_ERROR_PARITY				    0x138
-#define MV64360_CPU_ERROR_CAUSE					    0x140
-#define MV64360_CPU_ERROR_MASK					    0x148
-
-/****************************************/
-/*	CPU Interface Debug Registers	*/
-/****************************************/
-
-#define MV64360_PUNIT_SLAVE_DEBUG_LOW				    0x360
-#define MV64360_PUNIT_SLAVE_DEBUG_HIGH				    0x368
-#define MV64360_PUNIT_MASTER_DEBUG_LOW				    0x370
-#define MV64360_PUNIT_MASTER_DEBUG_HIGH				    0x378
-#define MV64360_PUNIT_MMASK					    0x3e4
-
-/****************************************/
-/*  Integrated SRAM Registers		*/
-/****************************************/
-
-#define MV64360_SRAM_CONFIG					    0x380
-#define MV64360_SRAM_TEST_MODE					    0X3F4
-#define MV64360_SRAM_ERROR_CAUSE				    0x388
-#define MV64360_SRAM_ERROR_ADDR					    0x390
-#define MV64360_SRAM_ERROR_ADDR_HIGH				    0X3F8
-#define MV64360_SRAM_ERROR_DATA_LOW				    0x398
-#define MV64360_SRAM_ERROR_DATA_HIGH				    0x3a0
-#define MV64360_SRAM_ERROR_DATA_PARITY				    0x3a8
-
-/****************************************/
-/* SDRAM Configuration			*/
-/****************************************/
-
-#define MV64360_SDRAM_CONFIG					    0x1400
-#define MV64360_D_UNIT_CONTROL_LOW				    0x1404
-#define MV64360_D_UNIT_CONTROL_HIGH				    0x1424
-#define MV64360_SDRAM_TIMING_CONTROL_LOW			    0x1408
-#define MV64360_SDRAM_TIMING_CONTROL_HIGH			    0x140c
-#define MV64360_SDRAM_ADDR_CONTROL				    0x1410
-#define MV64360_SDRAM_OPEN_PAGES_CONTROL			    0x1414
-#define MV64360_SDRAM_OPERATION					    0x1418
-#define MV64360_SDRAM_MODE					    0x141c
-#define MV64360_EXTENDED_DRAM_MODE				    0x1420
-#define MV64360_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
-#define MV64360_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
-#define MV64360_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
-#define MV64360_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
-#define MV64360_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
-
-/****************************************/
-/* SDRAM Error Report			*/
-/****************************************/
-
-#define MV64360_SDRAM_ERROR_DATA_LOW				    0x1444
-#define MV64360_SDRAM_ERROR_DATA_HIGH				    0x1440
-#define MV64360_SDRAM_ERROR_ADDR				    0x1450
-#define MV64360_SDRAM_RECEIVED_ECC				    0x1448
-#define MV64360_SDRAM_CALCULATED_ECC				    0x144c
-#define MV64360_SDRAM_ECC_CONTROL				    0x1454
-#define MV64360_SDRAM_ECC_ERROR_COUNTER				    0x1458
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-
-#define MV64360_DFCDL_CONFIG0					    0x1480
-#define MV64360_DFCDL_CONFIG1					    0x1484
-#define MV64360_DLL_WRITE					    0x1488
-#define MV64360_DLL_READ					    0x148c
-#define MV64360_SRAM_ADDR					    0x1490
-#define MV64360_SRAM_DATA0					    0x1494
-#define MV64360_SRAM_DATA1					    0x1498
-#define MV64360_SRAM_DATA2					    0x149c
-#define MV64360_DFCL_PROBE					    0x14a0
-
-/******************************************/
-/*   Debug Registers			  */
-/******************************************/
-
-#define MV64360_DUNIT_DEBUG_LOW					    0x1460
-#define MV64360_DUNIT_DEBUG_HIGH				    0x1464
-#define MV64360_DUNIT_MMASK					    0X1b40
-
-/****************************************/
-/* Device Parameters			*/
-/****************************************/
-
-#define MV64360_DEVICE_BANK0_PARAMETERS				    0x45c
-#define MV64360_DEVICE_BANK1_PARAMETERS				    0x460
-#define MV64360_DEVICE_BANK2_PARAMETERS				    0x464
-#define MV64360_DEVICE_BANK3_PARAMETERS				    0x468
-#define MV64360_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
-#define MV64360_DEVICE_INTERFACE_CONTROL			    0x4c0
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
-#define MV64360_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
-
-/****************************************/
-/* Device interrupt registers		*/
-/****************************************/
-
-#define MV64360_DEVICE_INTERRUPT_CAUSE				    0x4d0
-#define MV64360_DEVICE_INTERRUPT_MASK				    0x4d4
-#define MV64360_DEVICE_ERROR_ADDR				    0x4d8
-#define MV64360_DEVICE_ERROR_DATA				    0x4dc
-#define MV64360_DEVICE_ERROR_PARITY				    0x4e0
-
-/****************************************/
-/* Device debug registers		*/
-/****************************************/
-
-#define MV64360_DEVICE_DEBUG_LOW				    0x4e4
-#define MV64360_DEVICE_DEBUG_HIGH				    0x4e8
-#define MV64360_RUNIT_MMASK					    0x4f0
-
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-
-#define MV64360_PCI_0_CS_0_BANK_SIZE				    0xc08
-#define MV64360_PCI_1_CS_0_BANK_SIZE				    0xc88
-#define MV64360_PCI_0_CS_1_BANK_SIZE				    0xd08
-#define MV64360_PCI_1_CS_1_BANK_SIZE				    0xd88
-#define MV64360_PCI_0_CS_2_BANK_SIZE				    0xc0c
-#define MV64360_PCI_1_CS_2_BANK_SIZE				    0xc8c
-#define MV64360_PCI_0_CS_3_BANK_SIZE				    0xd0c
-#define MV64360_PCI_1_CS_3_BANK_SIZE				    0xd8c
-#define MV64360_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
-#define MV64360_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
-#define MV64360_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
-#define MV64360_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
-#define MV64360_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
-#define MV64360_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
-#define MV64360_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
-#define MV64360_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
-#define MV64360_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
-#define MV64360_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
-#define MV64360_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
-#define MV64360_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
-#define MV64360_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
-#define MV64360_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
-#define MV64360_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
-#define MV64360_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
-#define MV64360_PCI_0_CPU_BAR_SIZE				    0xd28
-#define MV64360_PCI_1_CPU_BAR_SIZE				    0xda8
-#define MV64360_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
-#define MV64360_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
-#define MV64360_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
-#define MV64360_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
-#define MV64360_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
-#define MV64360_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
-#define MV64360_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
-#define MV64360_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
-#define MV64360_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
-#define MV64360_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
-#define MV64360_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
-#define MV64360_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
-#define MV64360_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
-#define MV64360_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
-#define MV64360_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
-#define MV64360_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
-#define MV64360_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
-#define MV64360_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
-#define MV64360_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
-#define MV64360_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
-#define MV64360_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
-#define MV64360_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
-#define MV64360_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
-#define MV64360_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
-#define MV64360_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
-#define MV64360_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
-#define MV64360_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
-#define MV64360_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
-#define MV64360_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
-#define MV64360_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
-#define MV64360_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
-#define MV64360_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
-#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
-#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
-#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
-#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
-#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
-#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
-#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
-#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
-#define MV64360_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
-#define MV64360_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
-#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
-#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
-#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
-#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
-#define MV64360_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
-#define MV64360_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
-#define MV64360_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
-#define MV64360_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
-#define MV64360_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
-#define MV64360_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
-#define MV64360_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
-#define MV64360_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
-#define MV64360_PCI_0_HEADERS_RETARGET_BASE			    0xF44
-#define MV64360_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
-#define MV64360_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
-#define MV64360_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
-
-/***********************************/
-/*   PCI Control Register Map	   */
-/***********************************/
-
-#define MV64360_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
-#define MV64360_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
-#define MV64360_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
-#define MV64360_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
-#define MV64360_PCI_0_COMMAND					    0xc00
-#define MV64360_PCI_1_COMMAND					    0xc80
-#define MV64360_PCI_0_MODE					    0xd00
-#define MV64360_PCI_1_MODE					    0xd80
-#define MV64360_PCI_0_RETRY					    0xc04
-#define MV64360_PCI_1_RETRY					    0xc84
-#define MV64360_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
-#define MV64360_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
-#define MV64360_PCI_0_MSI_TRIGGER_TIMER				    0xc38
-#define MV64360_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
-#define MV64360_PCI_0_ARBITER_CONTROL				    0x1d00
-#define MV64360_PCI_1_ARBITER_CONTROL				    0x1d80
-#define MV64360_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
-#define MV64360_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
-#define MV64360_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
-#define MV64360_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
-#define MV64360_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
-#define MV64360_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
-#define MV64360_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
-#define MV64360_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
-#define MV64360_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
-#define MV64360_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
-#define MV64360_PCI_0_P2P_CONFIG				    0x1d14
-#define MV64360_PCI_1_P2P_CONFIG				    0x1d94
-
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
-#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
-#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
-
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
-#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
-#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define MV64360_PCI_0_CONFIG_ADDR				    0xcf8
-#define MV64360_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
-#define MV64360_PCI_1_CONFIG_ADDR				    0xc78
-#define MV64360_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
-#define MV64360_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
-#define MV64360_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers		*/
-/****************************************/
-
-#define MV64360_PCI_0_SERR_MASK					    0xc28
-#define MV64360_PCI_1_SERR_MASK					    0xca8
-#define MV64360_PCI_0_ERROR_ADDR_LOW				    0x1d40
-#define MV64360_PCI_1_ERROR_ADDR_LOW				    0x1dc0
-#define MV64360_PCI_0_ERROR_ADDR_HIGH				    0x1d44
-#define MV64360_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
-#define MV64360_PCI_0_ERROR_ATTRIBUTE				    0x1d48
-#define MV64360_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
-#define MV64360_PCI_0_ERROR_COMMAND				    0x1d50
-#define MV64360_PCI_1_ERROR_COMMAND				    0x1dd0
-#define MV64360_PCI_0_ERROR_CAUSE				    0x1d58
-#define MV64360_PCI_1_ERROR_CAUSE				    0x1dd8
-#define MV64360_PCI_0_ERROR_MASK				    0x1d5c
-#define MV64360_PCI_1_ERROR_MASK				    0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers		*/
-/****************************************/
-
-#define MV64360_PCI_0_MMASK					    0X1D24
-#define MV64360_PCI_1_MMASK					    0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define MV64360_PCI_DEVICE_AND_VENDOR_ID			    0x000
-#define MV64360_PCI_STATUS_AND_COMMAND				    0x004
-#define MV64360_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
-#define MV64360_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
-
-#define MV64360_PCI_SCS_0_BASE_ADDR_LOW				    0x010
-#define MV64360_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
-#define MV64360_PCI_SCS_1_BASE_ADDR_LOW				    0x018
-#define MV64360_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
-#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
-#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
-#define MV64360_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
-#define MV64360_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
-#define MV64360_PCI_CAPABILTY_LIST_POINTER			    0x034
-#define MV64360_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
-       /* capability list */
-#define MV64360_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
-#define MV64360_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
-#define MV64360_PCI_VPD_ADDR					    0x048
-#define MV64360_PCI_VPD_DATA					    0x04c
-#define MV64360_PCI_MSI_MESSAGE_CONTROL				    0x050
-#define MV64360_PCI_MSI_MESSAGE_ADDR				    0x054
-#define MV64360_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
-#define MV64360_PCI_MSI_MESSAGE_DATA				    0x05c
-#define MV64360_PCI_X_COMMAND					    0x060
-#define MV64360_PCI_X_STATUS					    0x064
-#define MV64360_PCI_COMPACT_PCI_HOT_SWAP			    0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define MV64360_PCI_SCS_2_BASE_ADDR_LOW				    0x110
-#define MV64360_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
-#define MV64360_PCI_SCS_3_BASE_ADDR_LOW				    0x118
-#define MV64360_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
-#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
-#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
-#define MV64360_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
-#define MV64360_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
-#define MV64360_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
-#define MV64360_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
-#define MV64360_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
-#define MV64360_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
-#define MV64360_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
-#define MV64360_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
-#define MV64360_PCI_CPU_BASE_ADDR_LOW				    0x220
-#define MV64360_PCI_CPU_BASE_ADDR_HIGH				    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define MV64360_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
-#define MV64360_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
-#define MV64360_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
-#define MV64360_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
-#define MV64360_PCI_P2P_I_O_BASE_ADDR				    0x420
-#define MV64360_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
-
-/****************************************/
-/* Messaging Unit Registers (I20)	*/
-/****************************************/
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
-#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
-#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
-
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
-#define MV64360_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
-#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
-#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
-#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
-#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
-#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
-#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
-#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
-#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
-#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
-#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
-#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
-#define MV64360_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
-#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
-#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
-#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
-#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
-#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
-#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
-#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
-#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
-#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define MV64360_ETH_PHY_ADDR_REG				    0x2000
-#define MV64360_ETH_SMI_REG					    0x2004
-#define MV64360_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
-#define MV64360_ETH_UNIT_DEFAULTID_REG				    0x200c
-#define MV64360_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
-#define MV64360_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
-#define MV64360_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
-#define MV64360_ETH_UNIT_ERROR_ADDR_REG				    0x2094
-#define MV64360_ETH_BAR_0					    0x2200
-#define MV64360_ETH_BAR_1					    0x2208
-#define MV64360_ETH_BAR_2					    0x2210
-#define MV64360_ETH_BAR_3					    0x2218
-#define MV64360_ETH_BAR_4					    0x2220
-#define MV64360_ETH_BAR_5					    0x2228
-#define MV64360_ETH_SIZE_REG_0					    0x2204
-#define MV64360_ETH_SIZE_REG_1					    0x220c
-#define MV64360_ETH_SIZE_REG_2					    0x2214
-#define MV64360_ETH_SIZE_REG_3					    0x221c
-#define MV64360_ETH_SIZE_REG_4					    0x2224
-#define MV64360_ETH_SIZE_REG_5					    0x222c
-#define MV64360_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
-#define MV64360_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
-#define MV64360_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
-#define MV64360_ETH_BASE_ADDR_ENABLE_REG			    0x2290
-#define MV64360_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
-#define MV64360_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
-#define MV64360_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
-#define MV64360_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
-#define MV64360_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
-#define MV64360_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
-#define MV64360_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
-#define MV64360_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
-#define MV64360_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
-#define MV64360_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
-#define MV64360_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
-#define MV64360_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
-#define MV64360_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
-#define MV64360_ETH_DSCP_3(port)				   (0x242c + (port<<10))
-#define MV64360_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
-#define MV64360_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
-#define MV64360_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
-#define MV64360_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
-#define MV64360_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
-#define MV64360_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
-#define MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
-#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
-#define MV64360_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
-#define MV64360_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
-#define MV64360_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
-#define MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
-#define MV64360_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
-#define MV64360_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
-#define MV64360_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
-#define MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
-#define MV64360_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
-#define MV64360_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
-#define MV64360_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
-#define MV64360_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
-#define MV64360_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
-#define MV64360_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
-#define MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
-#define MV64360_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
-#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
-#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
-#define MV64360_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
-#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
-#define MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
-#define MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
-#define MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
-
-/*******************************************/
-/*	    CUNIT  Registers		   */
-/*******************************************/
-
-	 /* Address Decoding Register Map */
-
-#define MV64360_CUNIT_BASE_ADDR_REG0				    0xf200
-#define MV64360_CUNIT_BASE_ADDR_REG1				    0xf208
-#define MV64360_CUNIT_BASE_ADDR_REG2				    0xf210
-#define MV64360_CUNIT_BASE_ADDR_REG3				    0xf218
-#define MV64360_CUNIT_SIZE0					    0xf204
-#define MV64360_CUNIT_SIZE1					    0xf20c
-#define MV64360_CUNIT_SIZE2					    0xf214
-#define MV64360_CUNIT_SIZE3					    0xf21c
-#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
-#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
-#define MV64360_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
-#define MV64360_MPSC0_ACCESS_PROTECTION_REG			    0xf254
-#define MV64360_MPSC1_ACCESS_PROTECTION_REG			    0xf258
-#define MV64360_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
-
-	/*  Error Report Registers  */
-
-#define MV64360_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
-#define MV64360_CUNIT_INTERRUPT_MASK_REG			    0xf314
-#define MV64360_CUNIT_ERROR_ADDR				    0xf318
-
-	/*  Cunit Control Registers */
-
-#define MV64360_CUNIT_ARBITER_CONTROL_REG			    0xf300
-#define MV64360_CUNIT_CONFIG_REG				    0xb40c
-#define MV64360_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
-
-	/*  Cunit Debug Registers   */
-
-#define MV64360_CUNIT_DEBUG_LOW					    0xf340
-#define MV64360_CUNIT_DEBUG_HIGH				    0xf344
-#define MV64360_CUNIT_MMASK					    0xf380
-
-	/*  Cunit Base Address Enable Window Bits*/
-#define MV64360_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
-#define MV64360_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
-#define MV64360_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
-#define MV64360_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
-
-	/*  MPSCs Clocks Routing Registers  */
-
-#define MV64360_MPSC_ROUTING_REG				    0xb400
-#define MV64360_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
-#define MV64360_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
-
-	/*  MPSCs Interrupts Registers	  */
-
-#define MV64360_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
-#define MV64360_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
-
-#define MV64360_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
-#define MV64360_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
-#define MV64360_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
-#define MV64360_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
-
-	/*  MPSC0 Registers	 */
-
-
-/***************************************/
-/*	    SDMA Registers	       */
-/***************************************/
-
-#define MV64360_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
-#define MV64360_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
-#define MV64360_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
-#define MV64360_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
-#define MV64360_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
-
-#define MV64360_SDMA_CAUSE_REG					    0xb800
-#define MV64360_SDMA_MASK_REG					    0xb880
-
-
-/****************************************/
-/* SDMA Address Space Targets		*/
-/****************************************/
-
-#define MV64360_SDMA_DRAM_CS_0_TARGET				    0x0e00
-#define MV64360_SDMA_DRAM_CS_1_TARGET				    0x0d00
-#define MV64360_SDMA_DRAM_CS_2_TARGET				    0x0b00
-#define MV64360_SDMA_DRAM_CS_3_TARGET				    0x0700
-
-#define MV64360_SDMA_DEV_CS_0_TARGET				    0x1e01
-#define MV64360_SDMA_DEV_CS_1_TARGET				    0x1d01
-#define MV64360_SDMA_DEV_CS_2_TARGET				    0x1b01
-#define MV64360_SDMA_DEV_CS_3_TARGET				    0x1701
-
-#define MV64360_SDMA_BOOT_CS_TARGET				    0x0f00
-
-#define MV64360_SDMA_SRAM_TARGET				    0x0003
-#define MV64360_SDMA_60X_BUS_TARGET				    0x4003
-
-#define MV64360_PCI_0_TARGET					    0x0003
-#define MV64360_PCI_1_TARGET					    0x0004
-
-
-/* Devices BAR and size registers */
-
-#define MV64360_DEV_CS0_BASE_ADDR				    0x028
-#define MV64360_DEV_CS0_SIZE					    0x030
-#define MV64360_DEV_CS1_BASE_ADDR				    0x228
-#define MV64360_DEV_CS1_SIZE					    0x230
-#define MV64360_DEV_CS2_BASE_ADDR				    0x248
-#define MV64360_DEV_CS2_SIZE					    0x250
-#define MV64360_DEV_CS3_BASE_ADDR				    0x038
-#define MV64360_DEV_CS3_SIZE					    0x040
-#define MV64360_BOOTCS_BASE_ADDR				    0x238
-#define MV64360_BOOTCS_SIZE					    0x240
-
-/* SDMA Window access protection */
-#define MV64360_SDMA_WIN_ACCESS_NOT_ALLOWED 0
-#define MV64360_SDMA_WIN_ACCESS_READ_ONLY 1
-#define MV64360_SDMA_WIN_ACCESS_FULL 2
-
-/* BRG Interrupts */
-
-#define MV64360_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
-#define MV64360_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
-#define MV64360_BRG_CAUSE_REG					    0xb834
-#define MV64360_BRG_MASK_REG					    0xb8b4
-
-/****************************************/
-/* DMA Channel Control			*/
-/****************************************/
-
-#define MV64360_DMA_CHANNEL0_CONTROL				    0x840
-#define MV64360_DMA_CHANNEL0_CONTROL_HIGH			    0x880
-#define MV64360_DMA_CHANNEL1_CONTROL				    0x844
-#define MV64360_DMA_CHANNEL1_CONTROL_HIGH			    0x884
-#define MV64360_DMA_CHANNEL2_CONTROL				    0x848
-#define MV64360_DMA_CHANNEL2_CONTROL_HIGH			    0x888
-#define MV64360_DMA_CHANNEL3_CONTROL				    0x84C
-#define MV64360_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
-
-
-/****************************************/
-/*	     IDMA Registers		*/
-/****************************************/
-
-#define MV64360_DMA_CHANNEL0_BYTE_COUNT				    0x800
-#define MV64360_DMA_CHANNEL1_BYTE_COUNT				    0x804
-#define MV64360_DMA_CHANNEL2_BYTE_COUNT				    0x808
-#define MV64360_DMA_CHANNEL3_BYTE_COUNT				    0x80C
-#define MV64360_DMA_CHANNEL0_SOURCE_ADDR			    0x810
-#define MV64360_DMA_CHANNEL1_SOURCE_ADDR			    0x814
-#define MV64360_DMA_CHANNEL2_SOURCE_ADDR			    0x818
-#define MV64360_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
-#define MV64360_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
-#define MV64360_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
-#define MV64360_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
-#define MV64360_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
-#define MV64360_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
-#define MV64360_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
-#define MV64360_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
-#define MV64360_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
-#define MV64360_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
-#define MV64360_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
-#define MV64360_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
-#define MV64360_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
-
- /*  IDMA Address Decoding Base Address Registers  */
-
-#define MV64360_DMA_BASE_ADDR_REG0				    0xa00
-#define MV64360_DMA_BASE_ADDR_REG1				    0xa08
-#define MV64360_DMA_BASE_ADDR_REG2				    0xa10
-#define MV64360_DMA_BASE_ADDR_REG3				    0xa18
-#define MV64360_DMA_BASE_ADDR_REG4				    0xa20
-#define MV64360_DMA_BASE_ADDR_REG5				    0xa28
-#define MV64360_DMA_BASE_ADDR_REG6				    0xa30
-#define MV64360_DMA_BASE_ADDR_REG7				    0xa38
-
- /*  IDMA Address Decoding Size Address Register   */
-
-#define MV64360_DMA_SIZE_REG0					    0xa04
-#define MV64360_DMA_SIZE_REG1					    0xa0c
-#define MV64360_DMA_SIZE_REG2					    0xa14
-#define MV64360_DMA_SIZE_REG3					    0xa1c
-#define MV64360_DMA_SIZE_REG4					    0xa24
-#define MV64360_DMA_SIZE_REG5					    0xa2c
-#define MV64360_DMA_SIZE_REG6					    0xa34
-#define MV64360_DMA_SIZE_REG7					    0xa3C
-
- /* IDMA Address Decoding High Address Remap and Access
-		  Protection Registers			  */
-
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
-#define MV64360_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
-#define MV64360_DMA_BASE_ADDR_ENABLE_REG			    0xa80
-#define MV64360_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
-#define MV64360_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
-#define MV64360_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
-#define MV64360_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
-#define MV64360_DMA_ARBITER_CONTROL				    0x860
-#define MV64360_DMA_CROSS_BAR_TIMEOUT				    0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
-#define MV64360_DMA_HEADERS_RETARGET_CONTROL			    0xa84
-#define MV64360_DMA_HEADERS_RETARGET_BASE			    0xa88
-
- /*  IDMA Interrupt Register  */
-
-#define MV64360_DMA_INTERRUPT_CAUSE_REG				    0x8c0
-#define MV64360_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
-#define MV64360_DMA_ERROR_ADDR					    0x8c8
-#define MV64360_DMA_ERROR_SELECT				    0x8cc
-
- /*  IDMA Debug Register ( for internal use )	 */
-
-#define MV64360_DMA_DEBUG_LOW					    0x8e0
-#define MV64360_DMA_DEBUG_HIGH					    0x8e4
-#define MV64360_DMA_SPARE					    0xA8C
-
-/****************************************/
-/* Timer_Counter			*/
-/****************************************/
-
-#define MV64360_TIMER_COUNTER0					    0x850
-#define MV64360_TIMER_COUNTER1					    0x854
-#define MV64360_TIMER_COUNTER2					    0x858
-#define MV64360_TIMER_COUNTER3					    0x85C
-#define MV64360_TIMER_COUNTER_0_3_CONTROL			    0x864
-#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
-#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
-
-/****************************************/
-/*	   Watchdog registers		*/
-/****************************************/
-
-#define MV64360_WATCHDOG_CONFIG_REG				    0xb410
-#define MV64360_WATCHDOG_VALUE_REG				    0xb414
-
-/****************************************/
-/* I2C Registers			*/
-/****************************************/
-
-#define MV64360_I2C_SLAVE_ADDR					    0xc000
-#define MV64360_I2C_EXTENDED_SLAVE_ADDR				    0xc010
-#define MV64360_I2C_DATA					    0xc004
-#define MV64360_I2C_CONTROL					    0xc008
-#define MV64360_I2C_STATUS_BAUDE_RATE				    0xc00C
-#define MV64360_I2C_SOFT_RESET					    0xc01c
-
-/****************************************/
-/* GPP Interface Registers		*/
-/****************************************/
-
-#define MV64360_GPP_IO_CONTROL					    0xf100
-#define MV64360_GPP_LEVEL_CONTROL				    0xf110
-#define MV64360_GPP_VALUE					    0xf104
-#define MV64360_GPP_INTERRUPT_CAUSE				    0xf108
-#define MV64360_GPP_INTERRUPT_MASK0				    0xf10c
-#define MV64360_GPP_INTERRUPT_MASK1				    0xf114
-#define MV64360_GPP_VALUE_SET					    0xf118
-#define MV64360_GPP_VALUE_CLEAR					    0xf11c
-
-/****************************************/
-/* Interrupt Controller Registers	*/
-/****************************************/
-
-/****************************************/
-/* Interrupts				*/
-/****************************************/
-
-#define MV64360_MAIN_INTERRUPT_CAUSE_LOW			    0x004
-#define MV64360_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
-#define MV64360_CPU_INTERRUPT0_MASK_LOW				    0x014
-#define MV64360_CPU_INTERRUPT0_MASK_HIGH			    0x01c
-#define MV64360_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
-#define MV64360_CPU_INTERRUPT1_MASK_LOW				    0x034
-#define MV64360_CPU_INTERRUPT1_MASK_HIGH			    0x03c
-#define MV64360_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
-#define MV64360_INTERRUPT0_MASK_0_LOW				    0x054
-#define MV64360_INTERRUPT0_MASK_0_HIGH				    0x05c
-#define MV64360_INTERRUPT0_SELECT_CAUSE				    0x064
-#define MV64360_INTERRUPT1_MASK_0_LOW				    0x074
-#define MV64360_INTERRUPT1_MASK_0_HIGH				    0x07c
-#define MV64360_INTERRUPT1_SELECT_CAUSE				    0x084
-
-/****************************************/
-/*	MPP Interface Registers		*/
-/****************************************/
-
-#define MV64360_MPP_CONTROL0					    0xf000
-#define MV64360_MPP_CONTROL1					    0xf004
-#define MV64360_MPP_CONTROL2					    0xf008
-#define MV64360_MPP_CONTROL3					    0xf00c
-
-/****************************************/
-/*    Serial Initialization registers	*/
-/****************************************/
-
-#define MV64360_SERIAL_INIT_LAST_DATA				    0xf324
-#define MV64360_SERIAL_INIT_CONTROL				    0xf328
-#define MV64360_SERIAL_INIT_STATUS				    0xf32c
-
-
-#endif /* __INCgt64360rh */
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
deleted file mode 100644
index aca5c45047..0000000000
--- a/board/esd/cpci750/pci.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/* PCI.c - PCI functions */
-
-
-#include <common.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-
-#ifdef CONFIG_PCI_PNP
-void pciauto_config_init(struct pci_controller *hose);
-int  pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
-#endif
-
-#include "../../Marvell/include/pci.h"
-
-#undef DEBUG
-#undef IDE_SET_NATIVE_MODE
-static unsigned int local_buses[] = { 0, 0 };
-
-static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
-	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-};
-
-#ifdef CONFIG_USE_CPCIDVI
-typedef struct {
-	unsigned int base;
-	unsigned int init;
-} GT_CPCIDVI_ROM_T;
-
-static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
-#endif
-
-#ifdef DEBUG
-static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
-static void gt_pci_bus_mode_display (PCI_HOST host)
-{
-	unsigned int mode;
-
-
-	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
-	switch (mode) {
-	case 0:
-		printf ("PCI %d bus mode: Conventional PCI\n", host);
-		break;
-	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
-		break;
-	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
-		break;
-	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
-		break;
-	default:
-		printf ("Unknown BUS %d\n", mode);
-	}
-}
-#endif
-
-static const unsigned int pci_p2p_configuration_reg[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static const unsigned int pci_configuration_address[] = {
-	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
-};
-
-static const unsigned int pci_configuration_data[] = {
-	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
-	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
-};
-
-static const unsigned int pci_error_cause_reg[] = {
-	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
-};
-
-static const unsigned int pci_arbiter_control[] = {
-	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
-};
-
-static const unsigned int pci_address_space_en[] = {
-	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
-};
-
-static const unsigned int pci_snoop_control_base_0_low[] = {
-	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_snoop_control_top_0[] = {
-	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
-};
-
-static const unsigned int pci_access_control_base_0_low[] = {
-	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_access_control_top_0[] = {
-	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
-};
-
-static const unsigned int pci_scs_bank_size[2][4] = {
-	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
-	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
-	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
-	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
-};
-
-static const unsigned int pci_p2p_configuration[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-
-/********************************************************************
-* pciWriteConfigReg - Write to a PCI configuration register
-*		    - Make sure the GT is configured as a master before writing
-*		      to another device on the PCI.
-*		    - The function takes care of Big/Little endian conversion.
-*
-*
-* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
-*		   (or any other PCI device spec)
-*	    pciDevNum: The device number needs to be addressed.
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
-			unsigned int pciDevNum, unsigned int data)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-	unsigned int addr;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &addr);
-	if (addr != DataForAddrReg)
-		return;
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-/********************************************************************
-* pciReadConfigReg  - Read from a PCI0 configuration register
-*		    - Make sure the GT is configured as a master before reading
-*		      from another device on the PCI.
-*		    - The function takes care of Big/Little endian conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*			spec)
-*	    pciDevNum: The device number needs to be addressed.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*		  cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
-			       unsigned int pciDevNum)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int data;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return 0xffffffff;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &data);
-	if (data != DataForAddrReg)
-		return 0xffffffff;
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-/********************************************************************
-* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-*				the agent is placed on another Bus. For more
-*				information read P2P in the PCI spec.
-*
-* Inputs:   unsigned int regOffset - The register offset as it apears in the
-*	    GT spec (or any other PCI device spec).
-*	    unsigned int pciDevNum - The device number needs to be addressed.
-*	    unsigned int busNum - On which bus does the Target agent connect
-*				  to.
-*	    unsigned int data - data to be written.
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
-*   PCI spec referring to P2P.
-*
-*********************************************************************/
-void pciOverBridgeWriteConfigReg (PCI_HOST host,
-				  unsigned int regOffset,
-				  unsigned int pciDevNum,
-				  unsigned int busNum, unsigned int data)
-{
-	unsigned int DataForReg;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
-	} else {
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT31 | BIT0;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-
-/********************************************************************
-* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
-*				the agent target locate on another PCI bus.
-*			      - Make sure the GT is configured as a master
-*				before reading from another device on the PCI.
-*			      - The function takes care of Big/Little endian
-*				conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*			 spec). (configuration register offset.)
-*	    pciDevNum: The device number needs to be addressed.
-*	    busNum: the Bus number where the agent is place.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*		  cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
-					 unsigned int regOffset,
-					 unsigned int pciDevNum,
-					 unsigned int busNum)
-{
-	unsigned int DataForReg;
-	unsigned int data;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
-	} else {		/* agent on another bus */
-
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT0 | BIT31;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-
-/********************************************************************
-* pciGetRegOffset - Gets the register offset for this region config.
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI register base address
-*********************************************************************/
-static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	}
-	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-}
-
-static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_ADDRESS_REMAP;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_ADDRESS_REMAP;
-		}
-	}
-	return PCI_0MEMORY0_ADDRESS_REMAP;
-}
-
-/********************************************************************
-* pciGetBaseAddress - Gets the base address of a PCI.
-*	    - If the PCI size is 0 then this base address has no meaning!!!
-*
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI base address.
-*********************************************************************/
-unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int regBase;
-	unsigned int regEnd;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &regBase);
-	GT_REG_READ (regOffset + 8, &regEnd);
-
-	if (regEnd <= regBase)
-		return 0xffffffff;	/* ERROR !!! */
-
-	regBase = regBase << 16;
-	return regBase;
-}
-
-bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
-		  unsigned int bankBase, unsigned int bankLength)
-{
-	unsigned int low = 0xfff;
-	unsigned int high = 0x0;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-	unsigned int remapOffset = pciGetRemapOffset (host, region);
-
-	if (bankLength != 0) {
-		low = (bankBase >> 16) & 0xffff;
-		high = ((bankBase + bankLength) >> 16) - 1;
-	}
-
-	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
-	GT_REG_WRITE (regOffset + 8, high);
-
-	if (bankLength != 0) {	/* must do AFTER writing maps */
-		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
-								   dont support upper 32
-								   in this driver */
-	}
-	return true;
-}
-
-unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	return (low & 0xffff) << 16;
-}
-
-unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low, high;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	GT_REG_READ (regOffset + 8, &high);
-	return ((high & 0xffff) + 1) << 16;
-}
-
-
-/* ronen - 7/Dec/03*/
-/********************************************************************
-* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
-* Inputs: one of the PCI BAR
-*********************************************************************/
-void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-/********************************************************************
-* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
-*
-* Inputs: base and size of PCI SCS
-*********************************************************************/
-void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
-		       unsigned int pciDramBase, unsigned int pciDramSize)
-{
-	/*ronen different function for 3rd bank. */
-	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
-
-	pciDramBase = pciDramBase & 0xfffff000;
-	pciDramBase = pciDramBase | (pciReadConfigReg (host,
-						       PCI_SCS_0_BASE_ADDRESS
-						       + offset,
-						       SELF) & 0x00000fff);
-	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
-			   pciDramBase);
-	if (pciDramSize == 0)
-		pciDramSize++;
-	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
-	gtPciEnableInternalBAR (host, bank);
-}
-
-/********************************************************************
-* pciSetRegionFeatures - This function modifys one of the 8 regions with
-*			  feature bits given as an input.
-*			- Be advised to check the spec before modifying them.
-* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-*	  unsigned int features - See file: pci.h there are defintion for those
-*				  region features.
-*	  unsigned int baseAddress - The region base Address.
-*	  unsigned int topAddress - The region top Address.
-* Returns: false if one of the parameters is erroneous true otherwise.
-*********************************************************************/
-bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
-			   unsigned int features, unsigned int baseAddress,
-			   unsigned int regionLength)
-{
-	unsigned int accessLow;
-	unsigned int accessHigh;
-	unsigned int accessTop = baseAddress + regionLength;
-
-	if (regionLength == 0) {	/* close the region. */
-		pciDisableAccessRegion (host, region);
-		return true;
-	}
-	/* base Address is store is bits [11:0] */
-	accessLow = (baseAddress & 0xfff00000) >> 20;
-	/* All the features are update according to the defines in pci.h (to be on
-	   the safe side we disable bits: [11:0] */
-	accessLow = accessLow | (features & 0xfffff000);
-	/* write to the Low Access Region register */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      accessLow);
-
-	accessHigh = (accessTop & 0xfff00000) >> 20;
-
-	/* write to the High Access Region register */
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
-		      accessHigh - 1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableAccessRegion - Disable The given Region by writing MAX size
-*			    to its low Address and MIN size to its high Address.
-*
-* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
-* Returns:  N/A.
-*********************************************************************/
-void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
-{
-	/* writing back the registers default values. */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      0x01001fff);
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
-}
-
-/********************************************************************
-* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciArbiterEnable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
-	return true;
-}
-
-/********************************************************************
-* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true
-*********************************************************************/
-bool pciArbiterDisable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
-	return true;
-}
-
-/********************************************************************
-* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
-*
-* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
-*	    PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
-*	    PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
-*	    PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
-*	    PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
-*	    PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
-*	    PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
-		(externalAgent1 << 9) + (externalAgent2 << 10) +
-		(externalAgent3 << 11) + (externalAgent4 << 12) +
-		(externalAgent5 << 13);
-	regData = (regData & 0xffffc07f) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
-	return true;
-}
-
-/********************************************************************
-* pciParkingDisable - Park on last option disable, with this function you can
-*		       disable the park on last mechanism for each agent.
-*		       disabling this option for all agents results parking
-*		       on the internal master.
-*
-* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
-*	  PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-*	  PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-*	  PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-*	  PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-*	  PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-*	  PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
-			PCI_AGENT_PARK externalAgent0,
-			PCI_AGENT_PARK externalAgent1,
-			PCI_AGENT_PARK externalAgent2,
-			PCI_AGENT_PARK externalAgent3,
-			PCI_AGENT_PARK externalAgent4,
-			PCI_AGENT_PARK externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
-		(externalAgent1 << 16) + (externalAgent2 << 17) +
-		(externalAgent3 << 18) + (externalAgent4 << 19) +
-		(externalAgent5 << 20);
-	regData = (regData & ~(0x7f << 14)) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
-*			respond to grant assertion within a window specified in
-*			the input value: 'brokenValue'.
-*
-* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
-*			grant without asserting frame.
-* Returns:  Error for illegal broken value otherwise true.
-*********************************************************************/
-bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
-{
-	unsigned int data;
-	unsigned int regData;
-
-	if (brokenValue > 0xf)
-		return false;	/* brokenValue must be 4 bit */
-	data = brokenValue << 3;
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = (regData & 0xffffff87) | data;
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableBrokenAgentDetection - This function disable the Broken agent
-*			    Detection mechanism.
-*			    NOTE: This operation may cause a dead lock on the
-*			    pci0 arbitration.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciDisableBrokenAgentDetection (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = regData & 0xfffffffd;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciP2PConfig - This function set the PCI_n P2P configurate.
-*		  For more information on the P2P read PCI spec.
-*
-* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
-*				       Boundry.
-*	   unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
-*				       Boundry.
-*	   unsigned int busNum - The CPI bus number to which the PCI interface
-*				       is connected.
-*	   unsigned int devNum - The PCI interface's device number.
-*
-* Returns:  true.
-*********************************************************************/
-bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
-		   unsigned int SecondBusHigh,
-		   unsigned int busNum, unsigned int devNum)
-{
-	unsigned int regData;
-
-	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
-		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
-	GT_REG_WRITE (pci_p2p_configuration[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-*			   supports Cache Coherency in the PCI_n interface.
-* Inputs: region - One of the four regions.
-*	  snoopType - There is four optional Types:
-*			 1. No Snoop.
-*			 2. Snoop to WT region.
-*			 3. Snoop to WB region.
-*			 4. Snoop & Invalidate to WB region.
-*	  baseAddress - Base Address of this region.
-*	  regionLength - Region length.
-* Returns: false if one of the parameters is wrong otherwise return true.
-*********************************************************************/
-bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
-			    PCI_SNOOP_TYPE snoopType,
-			    unsigned int baseAddress,
-			    unsigned int regionLength)
-{
-	unsigned int snoopXbaseAddress;
-	unsigned int snoopXtopAddress;
-	unsigned int data;
-	unsigned int snoopHigh = baseAddress + regionLength;
-
-	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
-		return false;
-	snoopXbaseAddress =
-		pci_snoop_control_base_0_low[host] + 0x10 * region;
-	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
-	if (regionLength == 0) {	/* closing the region */
-		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
-		GT_REG_WRITE (snoopXtopAddress, 0);
-		return true;
-	}
-	baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
-	data = (baseAddress >> 20) | snoopType << 12;
-	GT_REG_WRITE (snoopXbaseAddress, data);
-	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
-	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
-	return true;
-}
-
-static int gt_read_config_dword (struct pci_controller *hose,
-				 pci_dev_t dev, int offset, u32 * value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-					   PCI_DEV (dev));
-	} else {
-		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
-						     cfg_addr, offset,
-						     PCI_DEV (dev), bus);
-	}
-
-	return 0;
-}
-
-static int gt_write_config_dword (struct pci_controller *hose,
-				  pci_dev_t dev, int offset, u32 value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-				   PCI_DEV (dev), value);
-	} else {
-		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
-					     offset, PCI_DEV (dev), bus,
-					     value);
-	}
-	return 0;
-}
-
-
-static void gt_setup_ide (struct pci_controller *hose,
-			  pci_dev_t dev, struct pci_config_table *entry)
-{
-	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
-	u32 bar_response, bar_value;
-	int bar;
-
-	for (bar = 0; bar < 6; bar++) {
-		/*ronen different function for 3rd bank. */
-		unsigned int offset =
-			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
-
-		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
-					     0x0);
-		pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
-					    &bar_response);
-
-		pciauto_region_allocate (bar_response &
-					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
-					 pci_io : hose->pci_mem, ide_bar[bar],
-					 &bar_value);
-
-		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
-					     bar_value);
-	}
-}
-
-#ifdef CONFIG_USE_CPCIDVI
-static void gt_setup_cpcidvi (struct pci_controller *hose,
-			      pci_dev_t dev, struct pci_config_table *entry)
-{
-	u32		  bar_value, pci_response;
-
-	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
-	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
-	pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
-	pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
-	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
-	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
-	pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
-	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
-	gt_cpcidvi_rom.base = bar_value & 0xffffff00;
-	gt_cpcidvi_rom.init = 1;
-}
-
-unsigned char gt_cpcidvi_in8(unsigned int offset)
-{
-	unsigned char	  data;
-
-	if (gt_cpcidvi_rom.init == 0) {
-		return(0);
-		}
-	data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
-	return(data);
-}
-
-void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
-{
-	unsigned int	  off;
-
-	if (gt_cpcidvi_rom.init == 0) {
-		return;
-	}
-	off = data;
-	off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
-	in8(off);
-	return;
-}
-#endif
-
-/* TODO BJW: Change this for DB64360. This was pulled from the EV64260	*/
-/* and is curently not called *. */
-
-struct pci_config_table gt_config_table[] = {
-#ifdef CONFIG_USE_CPCIDVI
-	{PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
-#endif
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-	{}
-};
-
-struct pci_controller pci0_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-struct pci_controller pci1_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-void pci_init_board (void)
-{
-	unsigned int command;
-#ifdef CONFIG_PCI_PNP
-	unsigned int bar;
-#endif
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST0);
-#endif
-#ifdef CONFIG_USE_CPCIDVI
-	gt_cpcidvi_rom.init = 0;
-	gt_cpcidvi_rom.base = 0;
-#endif
-
-	pci0_hose.config_table = gt_config_table;
-	pci1_hose.config_table = gt_config_table;
-
-#ifdef CONFIG_USE_CPCIDVI
-	gt_config_table[0].config_device =  gt_setup_cpcidvi;
-#endif
-	gt_config_table[1].config_device =  gt_setup_ide;
-
-	pci0_hose.first_busno = 0;
-	pci0_hose.last_busno = 0xff;
-	local_buses[0] = pci0_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci0_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-	pci0_hose.region_count = 2;
-
-	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
-
-	pci_register_hose (&pci0_hose);
-	pciArbiterEnable (PCI_HOST0);
-	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
-#ifdef CONFIG_PCI_PNP
-	pciauto_config_init(&pci0_hose);
-	pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
-#endif
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST1);
-#endif
-	pci1_hose.first_busno = pci0_hose.last_busno + 1;
-	pci1_hose.last_busno = 0xff;
-	pci1_hose.current_busno = pci1_hose.first_busno;
-	local_buses[1] = pci1_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci1_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-
-	pci1_hose.region_count = 2;
-
-	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
-
-	pci_register_hose (&pci1_hose);
-
-	pciArbiterEnable (PCI_HOST1);
-	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-#ifdef CONFIG_PCI_PNP
-	pciauto_config_init(&pci1_hose);
-	pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
-#endif
-	pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-}
-#endif /* of CONFIG_PCI */
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
deleted file mode 100644
index 5858c10dcd..0000000000
--- a/board/esd/cpci750/sdram_init.c
+++ /dev/null
@@ -1,1667 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64360 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
- *
- * adaption for the cpci750 Board
- * Reinhard Arlt (reinhard.arlt@esd-electronics.com)
- *************************************************************************/
-
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../../Marvell/include/memory.h"
-#include "../../Marvell/include/pci.h"
-#include "../../Marvell/include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../../Marvell/common/i2c.h"
-#include "64360.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	DEBUG
-/* #define DEBUG */
-#ifdef CONFIG_PCI
-#define	MAP_PCI
-#endif /* of CONFIG_PCI */
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-int set_dfcdlInit(void);	/* setup delay line of Mv64360 */
-
-/* ------------------------------------------------------------------------- */
-
-int
-memory_map_bank(unsigned int bankNo,
-		unsigned int bankBase,
-		unsigned int bankLength)
-{
-#ifdef MAP_PCI
-	PCI_HOST host;
-#endif
-
-
-#ifdef DEBUG
-	if (bankLength > 0) {
-		printf("mapping bank %d at %08x - %08x\n",
-		       bankNo, bankBase, bankBase + bankLength - 1);
-	} else {
-		printf("unmapping bank %d\n", bankNo);
-	}
-#endif
-
-	memoryMapBank(bankNo, bankBase, bankLength);
-
-#ifdef MAP_PCI
-	for (host=PCI_HOST0;host<=PCI_HOST1;host++) {
-		const int features=
-			PREFETCH_ENABLE |
-			DELAYED_READ_ENABLE |
-			AGGRESSIVE_PREFETCH |
-			READ_LINE_AGGRESSIVE_PREFETCH |
-			READ_MULTI_AGGRESSIVE_PREFETCH |
-			MAX_BURST_4 |
-			PCI_NO_SWAP;
-
-		pciMapMemoryBank(host, bankNo, bankBase, bankLength);
-
-		pciSetRegionSnoopMode(host, bankNo, PCI_SNOOP_WB, bankBase,
-				bankLength);
-
-		pciSetRegionFeatures(host, bankNo, features, bankBase, bankLength);
-	}
-#endif
-	return 0;
-}
-
-#define GB         (1 << 30)
-
-/* much of this code is based on (or is) the code in the pip405 port */
-/* thanks go to the authors of said port - Josh */
-
-/* structure to store the relevant information about an sdram bank */
-typedef struct sdram_info {
-	uchar drb_size;
-	uchar registered, ecc;
-	uchar tpar;
-	uchar tras_clocks;
-	uchar burst_len;
-	uchar banks, slot;
-} sdram_info_t;
-
-/* Typedefs for 'gtAuxilGetDIMMinfo' function */
-
-typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE;
-
-typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
-				SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
-			       } VOLTAGE_INTERFACE;
-
-typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR;
-typedef enum _max_CL_supported_SD {SD_CL_1=1,  SD_CL_2,  SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD;
-
-
-/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo
-{
-    MEMORY_TYPE          memoryType;
-    unsigned int         numOfRowAddresses;
-    unsigned int         numOfColAddresses;
-    unsigned int         numOfModuleBanks;
-    unsigned int         dataWidth;
-    VOLTAGE_INTERFACE    voltageInterface;
-    unsigned int         errorCheckType;                                /* ECC , PARITY..*/
-    unsigned int         sdramWidth;                                    /* 4,8,16 or 32 */;
-    unsigned int         errorCheckDataWidth;                           /* 0 - no, 1 - Yes */
-    unsigned int         minClkDelay;
-    unsigned int         burstLengthSupported;
-    unsigned int         numOfBanksOnEachDevice;
-    unsigned int         suportedCasLatencies;
-    unsigned int     	 RefreshInterval;
-    unsigned int   	 maxCASlatencySupported_LoP;			/* LoP left of point (measured in ns) */
-    unsigned int   	 maxCASlatencySupported_RoP;			/* RoP right of point (measured in ns)*/
-    MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
-    MAX_CL_SUPPORTED_SD  maxClSupported_SD;
-    unsigned int         moduleBankDensity;
-    /* module attributes (true for yes) */
-    bool                 bufferedAddrAndControlInputs;
-    bool                 registeredAddrAndControlInputs;
-    bool                 onCardPLL;
-    bool                 bufferedDQMBinputs;
-    bool                 registeredDQMBinputs;
-    bool	         differentialClockInput;
-    bool                 redundantRowAddressing;
-
-    /* module general attributes */
-    bool                 suportedAutoPreCharge;
-    bool                 suportedPreChargeAll;
-    bool                 suportedEarlyRasPreCharge;
-    bool                 suportedWrite1ReadBurst;
-    bool                 suported5PercentLowVCC;
-    bool                 suported5PercentUpperVCC;
-    /* module timing parameters */
-    unsigned int         minRasToCasDelay;
-    unsigned int         minRowActiveRowActiveDelay;
-    unsigned int         minRasPulseWidth;
-    unsigned int         minRowPrechargeTime;   			/* measured in ns */
-
-    int   	         addrAndCommandHoldTime;			/* LoP left of point (measured in ns) */
-    int   	         addrAndCommandSetupTime;				/* (measured in ns/100) */
-    int   	         dataInputSetupTime;				/* LoP left of point (measured in ns) */
-    int   	         dataInputHoldTime;				/* LoP left of point (measured in ns) */
-/* tAC times for highest 2nd and 3rd highest CAS Latency values */
-    unsigned int   	 clockToDataOut_LoP;				/* LoP left of point (measured in ns) */
-    unsigned int   	 clockToDataOut_RoP;				/* RoP right of point (measured in ns)*/
-    unsigned int   	 clockToDataOutMinus1_LoP;				/* LoP left of point (measured in ns) */
-    unsigned int   	 clockToDataOutMinus1_RoP;			/* RoP right of point (measured in ns)*/
-    unsigned int   	 clockToDataOutMinus2_LoP;				/* LoP left of point (measured in ns) */
-    unsigned int   	 clockToDataOutMinus2_RoP;			/* RoP right of point (measured in ns)*/
-
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancy_LoP;		/* LoP left of point (measured in ns) */
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancy_RoP;		/* RoP right of point (measured in ns)*/
-
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus1_LoP;	/* LoP left of point (measured in ns) */
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus1_RoP;	/* RoP right of point (measured in ns)*/
-
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus2_LoP;	/* LoP left of point (measured in ns) */
-    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus2_RoP;	/* RoP right of point (measured in ns)*/
-
-    /* Parameters calculated from
-       the extracted DIMM information */
-    unsigned int         size;
-    unsigned int         deviceDensity;           		       	/* 16,64,128,256 or 512 Mbit */
-    unsigned int         numberOfDevices;
-    uchar 		 drb_size;				       	/* DRAM size in n*64Mbit */
-    uchar 		 slot;						/* Slot Number this module is inserted in */
-    uchar 		 spd_raw_data[128];			       	/* Content of SPD-EEPROM copied 1:1 */
-#ifdef DEBUG
-    uchar 		 manufactura[8];				/* Content of SPD-EEPROM Byte 64-71 */
-    uchar 		 modul_id[18];					/* Content of SPD-EEPROM Byte 73-90 */
-    uchar 		 vendor_data[27];			       	/* Content of SPD-EEPROM Byte 99-125 */
-    unsigned long	 modul_serial_no;			       	/* Content of SPD-EEPROM Byte 95-98 */
-    unsigned int         manufac_date;					/* Content of SPD-EEPROM Byte 93-94 */
-    unsigned int         modul_revision;				/* Content of SPD-EEPROM Byte 91-92 */
-    uchar 		 manufac_place;					/* Content of SPD-EEPROM Byte 72 */
-
-#endif
-} AUX_MEM_DIMM_INFO;
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short
-NS10to10PS(unsigned char spd_byte)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return(ns*100 + ns10*10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short
-NSto10PS(unsigned char spd_byte)
-{
-	return(spd_byte*100);
-}
-
-/* This code reads the SPD chip on the sdram and populates
- * the array which is passed in with the relevant information */
-/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
-static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
-{
-	unsigned long spd_checksum;
-
-	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
-	int ret;
-	unsigned int i, j, density = 1, devicesForErrCheck = 0;
-
-#ifdef DEBUG
-	unsigned int k;
-#endif
-	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
-	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
-	uchar supp_cal, cal_val;
-	ulong memclk, tmemclk;
-	ulong tmp;
-	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
-	uchar data[128];
-
-	memclk = gd->bus_clk;
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-	memset (data, 0, sizeof (data));
-
-
-	ret = 0;
-
-	DP (puts ("before i2c read\n"));
-
-	ret = i2c_read (addr, 0, 2, data, 128);
-
-	DP (puts ("after i2c read\n"));
-
-	if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd')
-	    || (data[67] != '-') || (data[68] != 'g') || (data[69] != 'm')
-	    || (data[70] != 'b') || (data[71] != 'h')) {
-		ret = -1;
-	}
-
-	if ((ret != 0) && (slot == 0)) {
-		memset (data, 0, sizeof (data));
-		data[0] = 0x80;
-		data[1] = 0x08;
-		data[2] = 0x07;
-		data[3] = 0x0c;
-		data[4] = 0x09;
-		data[5] = 0x01;
-		data[6] = 0x48;
-		data[7] = 0x00;
-		data[8] = 0x04;
-		data[9] = 0x75;
-		data[10] = 0x80;
-		data[11] = 0x02;
-		data[12] = 0x80;
-		data[13] = 0x10;
-		data[14] = 0x08;
-		data[15] = 0x01;
-		data[16] = 0x0e;
-		data[17] = 0x04;
-		data[18] = 0x0c;
-		data[19] = 0x01;
-		data[20] = 0x02;
-		data[21] = 0x20;
-		data[22] = 0x00;
-		data[23] = 0xa0;
-		data[24] = 0x80;
-		data[25] = 0x00;
-		data[26] = 0x00;
-		data[27] = 0x50;
-		data[28] = 0x3c;
-		data[29] = 0x50;
-		data[30] = 0x32;
-		data[31] = 0x10;
-		data[32] = 0xb0;
-		data[33] = 0xb0;
-		data[34] = 0x60;
-		data[35] = 0x60;
-		data[64] = 'e';
-		data[65] = 's';
-		data[66] = 'd';
-		data[67] = '-';
-		data[68] = 'g';
-		data[69] = 'm';
-		data[70] = 'b';
-		data[71] = 'h';
-		ret = 0;
-	}
-
-	/* zero all the values */
-	memset (dimmInfo, 0, sizeof (*dimmInfo));
-
-	/* copy the SPD content 1:1 into the dimmInfo structure */
-	for (i = 0; i <= 127; i++) {
-		dimmInfo->spd_raw_data[i] = data[i];
-	}
-
-	if (ret) {
-		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
-		return 0;
-	} else
-		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
-
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
-
-	for (i = 0; i <= 127; i++) {
-		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
-			data[i]);
-	}
-
-#endif
-#ifdef DEBUG
-	/* find Manufacturer of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
-		dimmInfo->manufactura[i] = data[64 + i];
-	}
-	printf ("\nThis RAM-Module is produced by: 		%s\n",
-		dimmInfo->manufactura);
-
-	/* find Manul-ID of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
-		dimmInfo->modul_id[i] = data[73 + i];
-	}
-	printf ("The Module-ID of this RAM-Module is: 		%s\n",
-		dimmInfo->modul_id);
-
-	/* find Vendor-Data of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
-		dimmInfo->vendor_data[i] = data[99 + i];
-	}
-	printf ("Vendor Data of this RAM-Module is: 		%s\n",
-		dimmInfo->vendor_data);
-
-	/* find modul_serial_no of Dimm Module */
-	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
-	printf ("Serial No. of this RAM-Module is: 		%ld (%lx)\n",
-		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
-
-	/* find Manufac-Data of Dimm Module */
-	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
-	printf ("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
-
-	/* find modul_revision of Dimm Module */
-	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
-	printf ("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
-
-	/* find manufac_place of Dimm Module */
-	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
-	printf ("manufac_place of this RAM-Module is: 		%d\n",
-		dimmInfo->manufac_place);
-
-#endif
-/*------------------------------------------------------------------------------------------------------------------------------*/
-/* calculate SPD checksum */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	spd_checksum = 0;
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	for (i = 2; i <= 35; i++) {
-		switch (i) {
-		case 2:	/* Memory type (DDR / SDRAM) */
-			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
-#ifdef DEBUG
-			if (dimmInfo->memoryType == 0)
-				DP (printf
-				    ("Dram_type in slot %d is: 			SDRAM\n",
-				     dimmInfo->slot));
-			if (dimmInfo->memoryType == 1)
-				DP (printf
-				    ("Dram_type in slot %d is: 			DDRAM\n",
-				     dimmInfo->slot));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 3:	/* Number Of Row Addresses */
-			dimmInfo->numOfRowAddresses = data[i];
-			DP (printf
-			    ("Module Number of row addresses: 		%d\n",
-			     dimmInfo->numOfRowAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 4:	/* Number Of Column Addresses */
-			dimmInfo->numOfColAddresses = data[i];
-			DP (printf
-			    ("Module Number of col addresses: 		%d\n",
-			     dimmInfo->numOfColAddresses));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 5:	/* Number Of Module Banks */
-			dimmInfo->numOfModuleBanks = data[i];
-			DP (printf
-			    ("Number of Banks on Mod. : 				%d\n",
-			     dimmInfo->numOfModuleBanks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 6:	/* Data Width */
-			dimmInfo->dataWidth = data[i];
-			DP (printf
-			    ("Module Data Width: 				%d\n",
-			     dimmInfo->dataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 8:	/* Voltage Interface */
-			switch (data[i]) {
-			case 0x0:
-				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
-				DP (printf
-				    ("Module is 					TTL_5V_TOLERANT\n"));
-				break;
-			case 0x1:
-				dimmInfo->voltageInterface = LVTTL;
-				DP (printf
-				    ("Module is 					LVTTL\n"));
-				break;
-			case 0x2:
-				dimmInfo->voltageInterface = HSTL_1_5V;
-				DP (printf
-				    ("Module is 					TTL_5V_TOLERANT\n"));
-				break;
-			case 0x3:
-				dimmInfo->voltageInterface = SSTL_3_3V;
-				DP (printf
-				    ("Module is 					HSTL_1_5V\n"));
-				break;
-			case 0x4:
-				dimmInfo->voltageInterface = SSTL_2_5V;
-				DP (printf
-				    ("Module is 					SSTL_2_5V\n"));
-				break;
-			default:
-				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
-				DP (printf
-				    ("Module is 					VOLTAGE_UNKNOWN\n"));
-				break;
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 9:	/* Minimum Cycle Time At Max CasLatancy */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
-				rightOfPoint;
-			DP (printf
-			    ("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 10:	/* Clock To Data Out */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOut_LoP = leftOfPoint;
-			dimmInfo->clockToDataOut_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out: 				%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			/*dimmInfo->clockToDataOut */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ECC
-		case 11:	/* Error Check Type */
-			dimmInfo->errorCheckType = data[i];
-			DP (printf
-			    ("Error Check Type (0=NONE): 			%d\n",
-			     dimmInfo->errorCheckType));
-			break;
-#endif
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 12:	/* Refresh Interval */
-			dimmInfo->RefreshInterval = data[i];
-			DP (printf
-			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
-			     dimmInfo->RefreshInterval));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 13:	/* Sdram Width */
-			dimmInfo->sdramWidth = data[i];
-			DP (printf
-			    ("Sdram Width: 					%d\n",
-			     dimmInfo->sdramWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 14:	/* Error Check Data Width */
-			dimmInfo->errorCheckDataWidth = data[i];
-			DP (printf
-			    ("Error Check Data Width: 			%d\n",
-			     dimmInfo->errorCheckDataWidth));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 15:	/* Minimum Clock Delay */
-			dimmInfo->minClkDelay = data[i];
-			DP (printf
-			    ("Minimum Clock Delay: 				%d\n",
-			     dimmInfo->minClkDelay));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 16:	/* Burst Length Supported */
-			   /******-******-******-*******
-			   * bit3 | bit2 | bit1 | bit0 *
-			   *******-******-******-*******
-	    burst length = *  8   |  4   |   2  |   1  *
-			   *****************************
-
-	    If for example bit0 and bit2 are set, the burst
-	    length supported are 1 and 4. */
-
-			dimmInfo->burstLengthSupported = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Burst Length Supported: 			"));
-			if (dimmInfo->burstLengthSupported & 0x01)
-				DP (printf ("1, "));
-			if (dimmInfo->burstLengthSupported & 0x02)
-				DP (printf ("2, "));
-			if (dimmInfo->burstLengthSupported & 0x04)
-				DP (printf ("4, "));
-			if (dimmInfo->burstLengthSupported & 0x08)
-				DP (printf ("8, "));
-			DP (printf (" Bit \n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 17:	/* Number Of Banks On Each Device */
-			dimmInfo->numOfBanksOnEachDevice = data[i];
-			DP (printf
-			    ("Number Of Banks On Each Chip: 			%d\n",
-			     dimmInfo->numOfBanksOnEachDevice));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 18:	/* Suported Cas Latencies */
-
-			/*     DDR:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
-			 *********************************************************
-			 SDRAM:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
-			 ********************************************************/
-			dimmInfo->suportedCasLatencies = data[i];
-#ifdef DEBUG
-			DP (printf
-			    ("Suported Cas Latencies: (CL) 			"));
-			if (dimmInfo->memoryType == 0) {	/* SDRAM */
-				for (k = 0; k <= 7; k++) {
-					if (dimmInfo->
-					    suportedCasLatencies & (1 << k))
-						DP (printf
-						    ("%d, 			",
-						     k + 1));
-				}
-
-			} else {	/* DDR-RAM */
-
-				if (dimmInfo->suportedCasLatencies & 1)
-					DP (printf ("1, "));
-				if (dimmInfo->suportedCasLatencies & 2)
-					DP (printf ("1.5, "));
-				if (dimmInfo->suportedCasLatencies & 4)
-					DP (printf ("2, "));
-				if (dimmInfo->suportedCasLatencies & 8)
-					DP (printf ("2.5, "));
-				if (dimmInfo->suportedCasLatencies & 16)
-					DP (printf ("3, "));
-				if (dimmInfo->suportedCasLatencies & 32)
-					DP (printf ("3.5, "));
-
-			}
-			DP (printf ("\n"));
-#endif
-			/* Calculating MAX CAS latency */
-			for (j = 7; j > 0; j--) {
-				if (((dimmInfo->
-				      suportedCasLatencies >> j) & 0x1) ==
-				    1) {
-					switch (dimmInfo->memoryType) {
-					case DDR:
-						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
-						switch (j) {
-						case 7:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 6:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 5:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3_5;
-							break;
-						case 4:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			3 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3;
-							break;
-						case 3:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2_5;
-							break;
-						case 2:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			2 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2;
-							break;
-						case 1:
-							DP (printf
-							    ("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_1_5;
-							break;
-						}
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							=
-							1 +
-							(int) (5 * j / 10);
-						if (((5 * j) % 10) != 0)
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 5;
-						else
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					case SDRAM:
-						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
-						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded                   */
-						DP (printf
-						    ("Max. Cas Latencies (SD): %d\n",
-						     dimmInfo->
-						     maxClSupported_SD));
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							= j;
-						dimmInfo->
-							maxCASlatencySupported_RoP
-							= 0;
-						DP (printf
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP));
-						break;
-					}
-					break;
-				}
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 21:	/* Buffered Address And Control Inputs */
-			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
-			dimmInfo->bufferedAddrAndControlInputs =
-				data[i] & BIT0;
-			dimmInfo->registeredAddrAndControlInputs =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
-			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
-			dimmInfo->registeredDQMBinputs =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->differentialClockInput =
-				(data[i] & BIT5) >> 5;
-			dimmInfo->redundantRowAddressing =
-				(data[i] & BIT6) >> 6;
-#ifdef DEBUG
-			if (dimmInfo->bufferedAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Buffered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Buffered Address/Control Input:		No \n"));
-
-			if (dimmInfo->registeredAddrAndControlInputs == 1)
-				DP (printf
-				    (" - Registered Address/Control Input:		Yes \n"));
-			else
-				DP (printf
-				    (" - Registered Address/Control Input:		No \n"));
-
-			if (dimmInfo->onCardPLL == 1)
-				DP (printf
-				    (" - On-Card PLL (clock):				Yes \n"));
-			else
-				DP (printf
-				    (" - On-Card PLL (clock):				No \n"));
-
-			if (dimmInfo->bufferedDQMBinputs == 1)
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				Yes \n"));
-			else
-				DP (printf
-				    (" - Bufferd DQMB Inputs:				No \n"));
-
-			if (dimmInfo->registeredDQMBinputs == 1)
-				DP (printf
-				    (" - Registered DQMB Inputs:			Yes \n"));
-			else
-				DP (printf
-				    (" - Registered DQMB Inputs:			No \n"));
-
-			if (dimmInfo->differentialClockInput == 1)
-				DP (printf
-				    (" - Differential Clock Input:			Yes \n"));
-			else
-				DP (printf
-				    (" - Differential Clock Input:			No \n"));
-
-			if (dimmInfo->redundantRowAddressing == 1)
-				DP (printf
-				    (" - redundant Row Addressing:			Yes \n"));
-			else
-				DP (printf
-				    (" - redundant Row Addressing:			No \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 22:	/* Suported AutoPreCharge */
-			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
-			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
-			dimmInfo->suportedAutoPreCharge =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->suportedPreChargeAll =
-				(data[i] & BIT2) >> 2;
-			dimmInfo->suportedWrite1ReadBurst =
-				(data[i] & BIT3) >> 3;
-			dimmInfo->suported5PercentLowVCC =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->suported5PercentUpperVCC =
-				(data[i] & BIT5) >> 5;
-#ifdef DEBUG
-			if (dimmInfo->suportedEarlyRasPreCharge == 1)
-				DP (printf
-				    (" - Early Ras Precharge:			Yes \n"));
-			else
-				DP (printf
-				    (" -  Early Ras Precharge:			No \n"));
-
-			if (dimmInfo->suportedAutoPreCharge == 1)
-				DP (printf
-				    (" - AutoPreCharge:				Yes \n"));
-			else
-				DP (printf
-				    (" -  AutoPreCharge:				No \n"));
-
-			if (dimmInfo->suportedPreChargeAll == 1)
-				DP (printf
-				    (" - Precharge All:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Precharge All:				No \n"));
-
-			if (dimmInfo->suportedWrite1ReadBurst == 1)
-				DP (printf
-				    (" - Write 1/ReadBurst:				Yes \n"));
-			else
-				DP (printf
-				    (" -  Write 1/ReadBurst:				No \n"));
-
-			if (dimmInfo->suported5PercentLowVCC == 1)
-				DP (printf
-				    (" - lower VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    ("  - lower VCC tolerance:			10 Percent \n"));
-
-			if (dimmInfo->suported5PercentUpperVCC == 1)
-				DP (printf
-				    (" - upper VCC tolerance:			5 Percent \n"));
-			else
-				DP (printf
-				    (" -  upper VCC tolerance:			10 Percent \n"));
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
-				rightOfPoint;
-			DP (printf
-			    ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
-				rightOfPoint;
-			DP (printf
-			    ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
-			DP (printf
-			    ("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 27:	/* Minimum Row Precharge Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
-			trp_clocks =
-				(dimmInfo->minRowPrechargeTime +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
-			     tmemclk, tmemclk / 100, tmemclk % 100));
-			DP (printf
-			    ("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 28:	/* Minimum Row Active to Row Active Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trrd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 29:	/* Minimum Ras-To-Cas Delay */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			trcd_clocks =
-				(dimmInfo->minRowActiveRowActiveDelay +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 30:	/* Minimum Ras Pulse Width */
-			dimmInfo->minRasPulseWidth = data[i];
-			tras_clocks =
-				(NSto10PS (data[i]) +
-				 (tmemclk - 1)) / tmemclk;
-			DP (printf
-			    ("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n",
-			     dimmInfo->minRasPulseWidth, tras_clocks));
-
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 31:	/* Module Bank Density */
-			dimmInfo->moduleBankDensity = data[i];
-			DP (printf
-			    ("Module Bank Density: 				%d\n",
-			     dimmInfo->moduleBankDensity));
-#ifdef DEBUG
-			DP (printf
-			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
-			{
-				if (dimmInfo->moduleBankDensity & 1)
-					DP (printf ("4MB, "));
-				if (dimmInfo->moduleBankDensity & 2)
-					DP (printf ("8MB, "));
-				if (dimmInfo->moduleBankDensity & 4)
-					DP (printf ("16MB, "));
-				if (dimmInfo->moduleBankDensity & 8)
-					DP (printf ("32MB, "));
-				if (dimmInfo->moduleBankDensity & 16)
-					DP (printf ("64MB, "));
-				if (dimmInfo->moduleBankDensity & 32)
-					DP (printf ("128MB, "));
-				if ((dimmInfo->moduleBankDensity & 64)
-				    || (dimmInfo->moduleBankDensity & 128)) {
-					DP (printf ("ERROR, "));
-					hang ();
-				}
-			}
-			DP (printf ("\n"));
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Setup Time [ns]: 		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 33:	/* Address And Command Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Address And Command Hold Time [ns]: 		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 34:	/* Data Input Setup Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Setup Time [ns]: 			%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 35:	/* Data Input Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			DP (printf
-			    ("Data Input Hold Time [ns]: 			%d.%d\n\n",
-			     sign * leftOfPoint, rightOfPoint));
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-		}
-	}
-	/* calculating the sdram density */
-	for (i = 0;
-	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
-	     i++) {
-		density = density * 2;
-	}
-	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
-		dimmInfo->sdramWidth;
-	dimmInfo->numberOfDevices =
-		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
-		dimmInfo->numOfModuleBanks;
-	devicesForErrCheck =
-		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
-	if ((dimmInfo->errorCheckType == 0x1)
-	    || (dimmInfo->errorCheckType == 0x2)
-	    || (dimmInfo->errorCheckType == 0x3)) {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			(dimmInfo->numberOfDevices - devicesForErrCheck);
-	} else {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			dimmInfo->numberOfDevices;
-	}
-
-	/* compute the module DRB size */
-	tmp = (1 <<
-	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
-	tmp *= dimmInfo->numOfModuleBanks;
-	tmp *= dimmInfo->sdramWidth;
-	tmp = tmp >> 24;	/* div by 0x4000000 (64M)       */
-	dimmInfo->drb_size = (uchar) tmp;
-	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
-
-	/* try a CAS latency of 3 first... */
-
-	/* bit 1 is CL2, bit 2 is CL3 */
-	supp_cal = (dimmInfo->suportedCasLatencies & 0x1c) >> 1;
-
-	cal_val = 0;
-	if (supp_cal & 8) {
-		if (NS10to10PS (data[9]) <= tmemclk)
-			cal_val = 6;
-	}
-	if (supp_cal & 4) {
-		if (NS10to10PS (data[9]) <= tmemclk)
-			cal_val = 5;
-	}
-
-	/* then 2... */
-	if (supp_cal & 2) {
-		if (NS10to10PS (data[23]) <= tmemclk)
-			cal_val = 4;
-	}
-
-	DP (printf ("cal_val = %d\n", cal_val * 5));
-
-	/* bummer, did't work... */
-	if (cal_val == 0) {
-		DP (printf ("Couldn't find a good CAS latency\n"));
-		hang ();
-		return 0;
-	}
-
-	return true;
-}
-
-/* sets up the GT properly with information passed in */
-int setup_sdram (AUX_MEM_DIMM_INFO * info)
-{
-	ulong tmp, check;
-	ulong tmp_sdram_mode = 0;	/* 0x141c */
-	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
-	int i;
-
-	/* sanity checking */
-	if (!info->numOfModuleBanks) {
-		printf ("setup_sdram called with 0 banks\n");
-		return 1;
-	}
-
-	/* delay line */
-
-	/* Program the GT with the discovered data */
-	if (info->registeredAddrAndControlInputs == true)
-		DP (printf
-		    ("Module is registered, but we do not support registered Modules !!!\n"));
-
-
-	/* delay line */
-	set_dfcdlInit ();	/* may be its not needed */
-	DP (printf ("Delay line set done\n"));
-
-	/* set SDRAM mode NOP */ /* To_do check it */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
-	}
-
-	/* SDRAM configuration */
-	GT_REG_WRITE (SDRAM_CONFIG, 0x58200400);
-	DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM open pages controll keep open as much as I can */
-	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
-	DP (printf
-	    ("sdram_open_pages_controll 0x1414: %08x\n",
-	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
-
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
-	if (tmp == 0)
-		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
-	else
-		DP (printf
-		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
-
-	/* SDRAM set CAS Lentency according to SPD information */
-	switch (info->memoryType) {
-	case SDRAM:
-		DP (printf ("### SD-RAM not supported yet !!!\n"));
-		hang ();
-		/* ToDo fill SD-RAM if needed !!!!! */
-		break;
-
-	case DDR:
-		DP (printf ("### SET-CL for DDR-RAM\n"));
-
-		switch (info->maxClSupported_DDR) {
-		case DDR_CL_3:
-			tmp_dunit_control_low = 0x3c000000;	/* Read-Data sampled on falling edge of Clk */
-			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
-			DP (printf
-			    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-			     tmp_sdram_mode, tmp_dunit_control_low));
-			break;
-
-		case DDR_CL_2_5:
-			if (tmp == 1) {	/* clocks sync */
-				tmp_dunit_control_low = 0x24000000;	/* Read-Data sampled on falling edge of Clk */
-				tmp_sdram_mode = 0x62;	/* CL=2,5 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* clk sync. bypassed     */
-
-				tmp_dunit_control_low = 0x03000000;	/* Read-Data sampled on rising edge of Clk */
-				tmp_sdram_mode = 0x62;	/* CL=2,5 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-
-		case DDR_CL_2:
-			if (tmp == 1) {	/* Sync */
-				tmp_dunit_control_low = 0x03000000;	/* Read-Data sampled on rising edge of Clk */
-				tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* Not sync.      */
-
-				tmp_dunit_control_low = 0x3b000000;	/* Read-Data sampled on rising edge of Clk */
-				tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-
-		case DDR_CL_1_5:
-			if (tmp == 1) {	/* Sync */
-				tmp_dunit_control_low = 0x23000000;	/* Read-Data sampled on falling edge of Clk */
-				tmp_sdram_mode = 0x52;	/* CL=1,5 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			} else {	/* not sync */
-
-				tmp_dunit_control_low = 0x1a000000;	/* Read-Data sampled on rising edge of Clk */
-				tmp_sdram_mode = 0x52;	/* CL=1,5 Burstlength = 4 */
-				DP (printf
-				    ("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low));
-			}
-			break;
-
-		default:
-			printf ("Max. CL is out of range %d\n",
-				info->maxClSupported_DDR);
-			hang ();
-			break;
-		}
-		break;
-	}
-
-	/* Write results of CL detection procedure */
-	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
-	}
-
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
-	if (tmp != 1) {		/*clocks are not sync */
-		/* asyncmode */
-		GT_REG_WRITE (D_UNIT_CONTROL_LOW,
-			      (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) |
-			      0x18110780 | tmp_dunit_control_low);
-	} else {
-		/* syncmode */
-		GT_REG_WRITE (D_UNIT_CONTROL_LOW,
-			      (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) |
-			      0x00110000 | tmp_dunit_control_low);
-	}
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
-	}
-
-/*------------------------------------------------------------------------------ */
-
-
-	/* bank parameters */
-	/* SDRAM address decode register */
-	/* program this with the default value */
-	tmp = 0x02;
-
-
-	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
-	switch (info->drb_size) {
-	case 1:		/* 64 Mbit */
-	case 2:		/* 128 Mbit */
-		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
-		tmp |= (0x00 << 4);
-		break;
-	case 4:		/* 256 Mbit */
-	case 8:		/* 512 Mbit */
-		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
-		tmp |= (0x01 << 4);
-		break;
-	case 16:		/* 1 Gbit */
-	case 32:		/* 2 Gbit */
-		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
-		tmp |= (0x02 << 4);
-		break;
-	default:
-		printf ("Error in dram size calculation\n");
-		DP (printf ("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
-		tmp |= (0x02 << 4);
-		return 1;
-	}
-
-	/* SDRAM bank parameters */
-	/* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
-	DP (printf
-	    ("setting up slot %d config with: %08lx \n", info->slot, tmp));
-	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
-
-/* ------------------------------------------------------------------------------ */
-
-	DP (printf
-	    ("setting up sdram_timing_control_low with: %08x \n",
-	     0x11511220));
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
-
-
-/* ------------------------------------------------------------------------------ */
-
-	/* SDRAM configuration */
-	tmp = GTREGREAD (SDRAM_CONFIG);
-
-	if (info->registeredAddrAndControlInputs
-	    || info->registeredDQMBinputs) {
-		tmp |= (1 << 17);
-		DP (printf
-		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
-		     info->registeredAddrAndControlInputs,
-		     info->registeredDQMBinputs));
-	}
-
-	/* Use buffer 1 to return read data to the CPU
-	 * Page 426 MV64360 */
-	tmp |= (1 << 26);
-	DP (printf
-	    ("Before Buffer assignment - sdram_conf: %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-	DP (printf
-	    ("After Buffer assignment - sdram_conf: %08x\n",
-	     GTREGREAD (SDRAM_CONFIG)));
-
-	/* SDRAM timing To_do: */
-
-
-	tmp = GTREGREAD (SDRAM_TIMING_CONTROL_HIGH);
-	DP (printf ("# sdram_timing_control_high is : %08lx \n", tmp));
-
-	/* SDRAM address decode register */
-	/* program this with the default value */
-	tmp = GTREGREAD (SDRAM_ADDR_CONTROL);
-	DP (printf
-	    ("SDRAM address control (before: decode): %08x  ",
-	     GTREGREAD (SDRAM_ADDR_CONTROL)));
-	GT_REG_WRITE (SDRAM_ADDR_CONTROL, (tmp | 0x2));
-	DP (printf
-	    ("SDRAM address control (after: decode): %08x\n",
-	     GTREGREAD (SDRAM_ADDR_CONTROL)));
-
-	/* set the SDRAM configuration for each bank */
-
-/*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
-	{
-		i = info->slot;
-		DP (printf
-		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
-
-		/* map the bank */
-		memory_map_bank (i, 0, GB / 4);
-		/* set SDRAM mode */ /* To_do check it */
-		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-
-
-		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
-		/* unmap the bank */
-		memory_map_bank (i, 0, 0);
-	}
-
-	return 0;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int
-dram_size(long int *base, long int maxsize)
-{
-    volatile long int	 *addr, *b=base;
-    long int	 cnt, val, save1, save2;
-
-#define STARTVAL (1<<20)	/* start test at 1M */
-    for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) {
-	    addr = base + cnt;	/* pointer arith! */
-
-	    save1=*addr;		/* save contents of addr */
-	    save2=*b;		/* save contents of base */
-
-	    *addr=cnt;		/* write cnt to addr */
-	    *b=0;			/* put null at base */
-
-	    /* check at base address */
-	    if ((*b) != 0) {
-		*addr=save1;	/* restore *addr */
-		*b=save2;	/* restore *b */
-		return (0);
-	    }
-	    val = *addr;		/* read *addr */
-	    val = *addr;		/* read *addr */
-
-	    *addr=save1;
-	    *b=save2;
-
-	    if (val != cnt) {
-		    DP(printf("Found %08x  at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
-		    /* fix boundary condition.. STARTVAL means zero */
-		    if(cnt==STARTVAL/sizeof(long)) cnt=0;
-		    return (cnt * sizeof(long));
-	    }
-    }
-    return maxsize;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* ppcboot interface function to SDRAM init - this is where all the
- * controlling logic happens */
-long int
-initdram(int board_type)
-{
-	int s0 = 0, s1 = 0;
-	int checkbank[4] = { [0 ... 3] = 0 };
-		ulong bank_no, realsize, total, check;
-	AUX_MEM_DIMM_INFO dimmInfo1;
-	AUX_MEM_DIMM_INFO dimmInfo2;
-	int nhr;
-
-	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
-
-	/* check the NHR bit and skip mem init if it's already done */
-	nhr = get_hid0() & (1 << 16);
-
-	if (nhr) {
-		printf("Skipping SD- DDRRAM setup due to NHR bit being set\n");
-	} else {
-		/* DIMM0 */
-		s0 = check_dimm(0, &dimmInfo1);
-
-		/* DIMM1 */
-		s1 = check_dimm(1, &dimmInfo2);
-
-		memory_map_bank(0, 0, 0);
-		memory_map_bank(1, 0, 0);
-		memory_map_bank(2, 0, 0);
-		memory_map_bank(3, 0, 0);
-
-		if (dimmInfo1.numOfModuleBanks && setup_sdram(&dimmInfo1)) {
-			printf("Setup for DIMM1 failed.\n");
-		}
-
-		if (dimmInfo2.numOfModuleBanks && setup_sdram(&dimmInfo2)) {
-			printf("Setup for DIMM2 failed.\n");
-		}
-
-		/* set the NHR bit */
-		set_hid0(get_hid0() | (1 << 16));
-	}
-	/* next, size the SDRAM banks */
-
-	realsize = total = 0;
-	check = GB/4;
-	if (dimmInfo1.numOfModuleBanks > 0) {checkbank[0] = 1; printf("-- DIMM1 has 1 bank\n");}
-	if (dimmInfo1.numOfModuleBanks > 1) {checkbank[1] = 1; printf("-- DIMM1 has 2 banks\n");}
-	if (dimmInfo1.numOfModuleBanks > 2)
-		printf("Error, SPD claims DIMM1 has >2 banks\n");
-
-	if (dimmInfo2.numOfModuleBanks > 0) {checkbank[2] = 1; printf("-- DIMM2 has 1 bank\n");}
-	if (dimmInfo2.numOfModuleBanks > 1) {checkbank[3] = 1; printf("-- DIMM2 has 2 banks\n");}
-	if (dimmInfo2.numOfModuleBanks > 2)
-		printf("Error, SPD claims DIMM2 has >2 banks\n");
-
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
-		/* skip over banks that are not populated */
-		if (! checkbank[bank_no])
-			continue;
-
-		if ((total + check) > CFG_GT_REGS)
-			check = CFG_GT_REGS - total;
-
-		memory_map_bank(bank_no, total, check);
-		realsize = dram_size((long int *)total, check);
-		memory_map_bank(bank_no, total, realsize);
-
-		total += realsize;
-	}
-
-/*	Setup Ethernet DMA Adress window to DRAM Area */
-	return(total);
-}
-
-/* ***************************************************************************************
-! *                             SDRAM INIT                                              *
-! *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb       *
-! *               This procedure fits only the Atlantis                                *
-! *                                                                                     *
-! *************************************************************************************** */
-
-
-/* ***************************************************************************************
-! *                             DFCDL initialize MV643xx Design Considerations             *
-! *                                                                                     *
-! *************************************************************************************** */
-int set_dfcdlInit (void)
-{
-	int i;
-	unsigned int dfcdl_word = 0x0000014f;
-
-	for (i = 0; i < 64; i++) {
-		GT_REG_WRITE (SRAM_DATA0, dfcdl_word);
-	}
-	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
-
-
-	return (0);
-}
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
deleted file mode 100644
index ba32ac12ac..0000000000
--- a/board/esd/cpci750/serial.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * modified for marvell db64360 eval board by
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * modified for cpci750 board by
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * serial.c - serial support for esd cpci750 board
- */
-
-/* supports the MPSC */
-
-#include <common.h>
-#include <command.h>
-#include "../../Marvell/include/memory.h"
-#include "serial.h"
-
-#include "mpsc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int serial_init (void)
-{
-	mpsc_init (gd->baudrate);
-
-	return (0);
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-		mpsc_putchar ('\r');
-
-	mpsc_putchar (c);
-}
-
-int serial_getc (void)
-{
-	return mpsc_getchar ();
-}
-
-int serial_tstc (void)
-{
-	return mpsc_test_char ();
-}
-
-void serial_setbrg (void)
-{
-	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
-}
-
-
-void serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void kgdb_serial_init (void)
-{
-}
-
-void putDebugChar (int c)
-{
-	serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
-	serial_puts (str);
-}
-
-int getDebugChar (void)
-{
-	return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
-	return;
-}
-#endif /* CFG_CMD_KGDB */
diff --git a/board/esd/cpci750/serial.h b/board/esd/cpci750/serial.h
deleted file mode 100644
index 27eee65c45..0000000000
--- a/board/esd/cpci750/serial.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * modified for marvell db64360 eval board by
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* serial.h - mostly useful for DUART serial_init in serial.c */
-
-#ifndef __SERIAL_H__
-#define __SERIAL_H__
-
-
-#endif /* __SERIAL_H__ */
diff --git a/board/esd/cpci750/u-boot.lds b/board/esd/cpci750/u-boot.lds
deleted file mode 100644
index d89eb6cff2..0000000000
--- a/board/esd/cpci750/u-boot.lds
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/74xx_7xx/start.o	(.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/*    . = env_offset; */
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile
deleted file mode 100644
index 50d0963d26..0000000000
--- a/board/esd/pmc405/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common/xilinx_jtag)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-# Objects for Xilinx JTAG programming (CPLD)
-CPLD    = ../common/xilinx_jtag/lenval.o \
-	  ../common/xilinx_jtag/micro.o \
-	  ../common/xilinx_jtag/ports.o
-
-COBJS	= $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/esd/pmc405/config.mk b/board/esd/pmc405/config.mk
deleted file mode 100644
index fc2794dbb2..0000000000
--- a/board/esd/pmc405/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd PMC405 boards
-#
-
-TEXT_BASE = 0xFFFC0000
diff --git a/board/esd/pmc405/fpgadata.c b/board/esd/pmc405/fpgadata.c
deleted file mode 100644
index ebdf71dc78..0000000000
--- a/board/esd/pmc405/fpgadata.c
+++ /dev/null
@@ -1,2472 +0,0 @@
-  0x07,0x20,0x12,0x00,0x12,0x01,0x04,0x00,0x00,0x00,0x00,0x02,0x08,0xff,0x02,0x08,
-  0xfe,0x08,0x00,0x00,0x00,0x20,0x01,0x0f,0xff,0xff,0xff,0x09,0x00,0x00,0x00,0x00,
-  0xf9,0x60,0x20,0x93,0x02,0x08,0xff,0x02,0x08,0xff,0x02,0x08,0xe8,0x08,0x00,0x00,
-  0x00,0x06,0x01,0x00,0x09,0x05,0x00,0x02,0x08,0xed,0x04,0x00,0x03,0x0d,0x40,0x08,
-  0x00,0x00,0x00,0x12,0x01,0x00,0x00,0x00,0x09,0x03,0xff,0xff,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x03,0x09,0x03,0xff,0xfd,0x03,0xff,0xfd,0x04,0x00,0x00,0x00,0x00,0x02,
-  0x08,0xea,0x08,0x00,0x00,0x00,0x22,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x00,0x04,0x38,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x00,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x20,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x24,0x38,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x00,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x2c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x00,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x44,
-  0x14,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x00,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x00,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x00,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x00,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x00,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x00,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x00,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x00,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x00,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x01,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x01,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x01,0x08,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x01,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x01,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x01,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x01,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x01,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x01,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x01,0x80,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x01,
-  0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x01,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x01,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x01,0xa0,0x10,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x01,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xc0,0x00,0x21,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x01,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x01,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x01,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x02,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x02,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x02,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x28,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x2c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x02,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x02,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x02,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x02,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x02,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,
-  0xa0,0x00,0x81,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x02,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x02,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x02,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x02,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x02,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x02,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x03,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x03,0x04,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x03,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x03,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x10,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x20,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x03,0x24,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x28,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x03,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x03,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x03,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x03,0x80,0x01,0x41,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x03,0x84,0x02,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x03,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0x8c,0x03,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x03,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0xa0,0x03,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0xa4,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x03,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x03,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x03,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x03,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x03,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x04,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x04,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x04,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x04,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x04,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x04,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x04,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x04,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x04,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x04,0x84,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x04,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x04,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x04,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xa0,0x00,0x41,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x04,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x04,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x04,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x04,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x05,0x00,0xc0,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x05,0x04,0xc0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x05,0x08,0x40,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x0c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x10,0x80,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x05,0x20,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x24,0x00,
-  0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x05,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x30,
-  0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x40,0x20,0x19,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x05,0x44,0x20,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,
-  0x48,0x48,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x05,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x05,0x80,0x00,0x21,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x84,0x00,0x11,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x88,0x80,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x05,0x8c,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xa0,0x04,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x05,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,
-  0xa8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x05,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x05,0xc0,0xc8,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc4,0x08,0x09,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x05,0xcc,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x06,0x03,0x02,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x07,
-  0x42,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x06,
-  0x0b,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x0f,0x02,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x06,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x06,0x23,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x27,0x03,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x06,0x2f,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x06,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x48,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x06,
-  0x80,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x06,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x06,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x90,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x06,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xa8,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x06,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xc4,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x06,0xc8,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,
-  0xcc,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x06,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x07,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x07,0x07,0x02,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x07,0x0b,0x02,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x0f,0x02,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x07,0x11,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x23,
-  0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x27,0x03,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x07,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,
-  0x2f,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x07,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x07,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x07,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x07,0x82,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x07,0x86,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x07,0x89,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,
-  0x8d,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x91,0x02,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x07,0xa0,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x07,0xa5,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0xab,0x02,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x07,0xad,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x07,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0xc0,0x04,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x07,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x07,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x08,0x00,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x08,0x04,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x08,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x0e,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x08,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x23,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x26,0x01,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x08,0x28,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x2e,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x08,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x44,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x08,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x08,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x08,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x08,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x08,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x08,0xa0,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x08,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x08,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x08,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x08,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x09,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x09,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x09,0x08,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x09,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x09,0x26,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x09,0x28,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x2e,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x09,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x09,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x09,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x09,0x80,0x10,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x09,
-  0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x09,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x09,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x09,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x09,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x09,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x09,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x09,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x0a,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0a,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0a,0x26,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x28,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x2c,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0a,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0a,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0a,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0a,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0a,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,
-  0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0a,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0a,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xc0,0x00,0x41,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0a,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0b,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x0b,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x0b,0x0a,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0b,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x22,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0b,0x26,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x28,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x2e,0x01,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0b,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0b,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x0b,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x0b,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0b,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0b,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0b,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0xa0,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0b,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0b,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0b,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0b,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0c,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x0c,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x0c,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0c,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0c,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0c,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0c,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x0c,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x0c,0x80,0x00,0x81,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0c,0x84,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0c,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0c,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0c,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0c,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0c,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0c,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0c,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0d,0x03,0x02,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x0d,0x07,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x0d,0x0b,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x0f,0x02,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0d,0x23,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x27,0x07,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0d,0x2f,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x30,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x40,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0d,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,
-  0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x0d,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x0d,0x80,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0d,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0xa0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0d,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0d,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0d,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0xc4,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0d,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0e,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x04,
-  0xc0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,
-  0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x0c,0x80,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0e,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0e,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x24,0x00,0x11,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0e,0x2c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x40,0x60,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0e,0x44,0x48,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x48,0xc0,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x4c,0x80,0x11,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0e,
-  0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x0e,0x84,0x00,0x21,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x88,0x40,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0e,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x90,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0e,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa8,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0e,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xc4,0xa0,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0e,0xc8,0x08,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,
-  0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x0e,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x0f,0x00,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0f,0x04,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0f,0x0a,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x0f,0x12,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x20,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x26,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x0f,0x28,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,
-  0x2c,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0f,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0f,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0f,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0f,0x80,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x0f,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x0f,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,
-  0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0x90,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x0f,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x0f,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0xa8,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x0f,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0xc0,0x10,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x0f,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0f,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x0f,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x10,0x01,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x05,0x82,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x0a,0x82,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x0c,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x10,0x12,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x20,0x03,0x11,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x26,0x03,0x11,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x10,0x2a,0x03,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x2c,0x01,
-  0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x30,0x00,0x11,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x10,0x40,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x44,
-  0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x48,0x00,0x11,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x10,0x4c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x50,0x00,0x13,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x10,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x10,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x10,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x10,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x10,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x10,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x10,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x10,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x11,0x00,0xc0,0x11,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x04,0x00,0x11,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x08,0x80,0x21,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x11,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x11,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x11,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x11,0x40,0x08,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x44,0x20,0x09,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x48,0xc0,0x11,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x11,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x11,0x80,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x11,
-  0x84,0x00,0x21,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x11,0x88,0x40,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x90,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x11,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x11,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xb0,0x00,
-  0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc0,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x11,0xc4,0xc0,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc8,
-  0x08,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,
-  0xd0,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x12,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x12,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x12,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x28,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x2c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x12,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x12,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x12,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x12,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x12,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,
-  0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x12,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x12,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x12,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x12,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x12,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x12,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x13,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x13,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x13,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x13,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x13,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x28,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x13,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x13,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x13,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x13,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x13,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xa2,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x13,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x13,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x13,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x14,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x14,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x14,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x0e,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x14,0x23,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x14,0x2e,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x14,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x14,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x14,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x14,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x14,0x84,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x14,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x14,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x14,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x14,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x14,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x14,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x14,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x15,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x15,0x04,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x15,0x08,0xc0,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x0c,0x80,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x10,0x80,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x15,0x20,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x24,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x28,0x00,0x11,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x15,0x2c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x30,
-  0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x40,0x28,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x15,0x44,0x28,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
-  0x48,0x48,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x4c,0x00,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x15,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x15,0x80,0xc0,0x31,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0x84,0xc0,0x21,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x15,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x11,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x15,0xa4,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x15,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x15,0xc0,0xc0,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xc4,0x40,0x11,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x15,0xcc,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x16,0x02,0x02,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x06,
-  0x3a,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x16,
-  0x0b,0x42,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x0d,0x02,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x16,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x16,0x20,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x27,0x3b,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x16,0x2d,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x16,0x44,0x14,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x48,0x00,
-  0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x16,
-  0x83,0x02,0x11,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x16,0x87,0x02,0x11,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x8b,0x02,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x16,0x8f,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x93,0x02,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xa3,0x03,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x16,0xa7,0x07,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xab,0x03,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xaf,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x16,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xc4,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x16,0xc8,0x08,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,
-  0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x16,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x17,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x17,0x07,0x02,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x17,0x0b,0x02,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x0f,0x02,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x17,0x11,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x23,
-  0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x27,0x03,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x17,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,
-  0x2f,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x17,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x17,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x17,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x17,0x80,0x0a,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x17,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x17,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,
-  0x8e,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x90,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x17,0xa3,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x17,0xa6,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xa8,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xae,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x17,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xc0,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x17,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x17,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x18,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x18,0x04,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x18,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x18,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x20,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x26,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x18,0x28,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x2e,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x18,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x44,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x18,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x18,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x18,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x18,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x18,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x18,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa6,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa8,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x18,0xac,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x18,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x18,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x18,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x19,0x01,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x19,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x19,0x08,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x19,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,
-  0x11,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x19,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x19,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x19,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x19,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x19,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x19,0x80,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x19,
-  0x85,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x19,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x19,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x19,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x19,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x19,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x19,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x19,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x1a,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1a,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x20,0x00,0x11,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1a,0x24,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x28,
-  0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x2c,0x00,0x11,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1a,0x30,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
-  0x40,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x44,0x00,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1a,0x48,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1a,0x4c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1a,0x82,0x81,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x84,0x80,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x88,
-  0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x8c,0x80,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1a,0x90,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
-  0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1a,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1a,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1a,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1b,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x1b,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x1b,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1b,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1b,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x28,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1b,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1b,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x1b,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x1b,0x81,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1b,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1b,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1b,0x91,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0xa0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1b,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1b,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1b,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1b,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1b,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1c,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x1c,0x07,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x1c,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1c,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1c,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1c,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1c,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x1c,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x1c,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1c,0x85,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1c,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1c,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1c,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1c,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1c,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1c,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1c,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1c,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1d,0x01,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x1d,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x1d,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x0c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1d,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x24,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1d,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x30,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x40,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1d,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,
-  0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x1d,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x1d,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1d,0x87,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1d,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1d,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0xa0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1d,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1d,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1d,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0xc4,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1d,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1d,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1d,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1e,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1e,0x04,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1e,
-  0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x0c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1e,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1e,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x24,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1e,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1e,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x48,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1e,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1e,
-  0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x1e,0x85,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x1e,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1e,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0x90,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0xa0,0x08,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1e,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0xa8,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1e,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,0xc4,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1e,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1e,
-  0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x1e,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x1f,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1f,0x04,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1f,0x08,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x1f,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x20,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x24,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x1f,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,
-  0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1f,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1f,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1f,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1f,0x83,0x02,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x1f,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x1f,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,
-  0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0x90,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x1f,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x1f,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0xa8,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x1f,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0xc0,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x1f,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1f,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x1f,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x20,0x03,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x20,0x04,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x20,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x20,0x13,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x20,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x20,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x2c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x20,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x44,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x20,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x20,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x20,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x20,0x85,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x20,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x20,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x20,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x20,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x20,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x20,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x20,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x21,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x21,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x21,0x08,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x21,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x21,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x21,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x21,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x21,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x21,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x21,0x81,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x21,
-  0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x21,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x21,0x91,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x21,0xa0,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x21,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x21,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x21,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x21,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x22,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x22,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x22,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x22,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x22,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x28,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x2c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x22,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x22,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x22,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x22,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x22,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x22,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x22,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x22,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,
-  0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x22,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x22,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x22,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x22,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x22,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x22,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x23,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x23,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x23,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x23,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x23,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x28,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x23,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x23,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x23,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x23,0x81,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x23,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x23,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x23,0x91,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0xa0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x23,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x23,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x23,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x23,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x23,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x24,0x01,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x24,0x06,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x24,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x24,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x24,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x24,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x24,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x24,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x24,0x80,0x22,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x24,0x85,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x24,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x24,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x24,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x24,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x24,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x24,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x24,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x24,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x25,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x25,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x25,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x0c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x25,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x24,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x25,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x30,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x40,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x25,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,
-  0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x25,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x25,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x25,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x25,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x25,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0xa0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x25,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x25,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x25,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x25,0xc4,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x25,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x25,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x25,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x26,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x26,0x05,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x26,
-  0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x0c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x26,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x26,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x24,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x26,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x26,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x48,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x26,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x26,
-  0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x26,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x26,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x26,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0x90,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x26,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0xa8,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x26,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,0xc4,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x26,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x26,
-  0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x26,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x27,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x27,0x04,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x27,0x08,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x27,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x20,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x25,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x27,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,
-  0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x27,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x27,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x27,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x27,0x80,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x27,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x27,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,
-  0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0x90,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x27,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x27,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0xa8,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x27,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x27,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0xc0,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x27,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x27,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x27,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x28,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x28,0x04,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x28,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x28,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x20,0x00,0x11,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x24,0x00,0x11,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x28,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x2c,0x00,
-  0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x30,0x00,0x11,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x28,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x44,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x28,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x28,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x28,0x80,0x80,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x28,0x84,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x28,0x88,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x8c,0x80,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x90,0x80,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x28,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x28,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xc0,0x00,0x11,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x28,0xc4,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x28,0xc8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xcc,0x00,0x11,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x28,0xd0,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x29,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x08,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x29,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x29,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x29,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x29,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x29,0x80,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x29,
-  0x84,0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x29,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x29,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xa4,0x80,0xe1,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x29,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x29,0xc4,0x00,0x61,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x2a,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2a,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2a,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x28,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x2c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2a,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2a,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2a,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2a,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2a,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,
-  0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2a,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2a,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2a,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2a,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2a,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2b,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x2b,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x2b,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2b,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2b,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x28,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2b,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2b,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x2b,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x2b,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2b,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2b,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2b,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0xa0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2b,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2b,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2b,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2b,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2b,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2c,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x2c,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x2c,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2c,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2c,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2c,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2c,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x2c,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x2c,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2c,0x84,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2c,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2c,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2c,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2c,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2c,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2c,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2c,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2c,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2d,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x2d,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x2d,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x0c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2d,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x24,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2d,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x30,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x40,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2d,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,
-  0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x2d,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x2d,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2d,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2d,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2d,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0xa0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2d,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2d,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2d,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0xc4,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2d,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2d,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2d,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2e,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2e,0x04,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2e,
-  0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x0c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2e,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2e,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x24,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2e,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x30,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2e,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x48,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2e,0x50,
-  0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2e,
-  0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x2e,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x2e,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2e,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0x90,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2e,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0xa8,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2e,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0xc0,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,0xc4,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2e,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2e,
-  0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x2e,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x03,0x09,0x00,0x2f,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x2f,0x04,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2f,0x08,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x2f,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x20,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x24,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x2f,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,
-  0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x30,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2f,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2f,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x48,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,
-  0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x2f,0x50,0x00,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x2f,0x80,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x2f,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x2f,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,
-  0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0x90,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x2f,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x2f,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0xa8,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x2f,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0xc0,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x2f,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x2f,0xcc,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x2f,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x03,0x09,0x00,0x30,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x30,0x04,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x30,0x08,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x30,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x20,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x30,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x2c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x30,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x44,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x48,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x30,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
-  0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x30,0x50,0x00,0x03,0x00,0x00,
-  0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x30,0x80,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x30,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x30,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x8c,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x30,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0xa4,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0xa8,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x30,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,
-  0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0xc0,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x30,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x30,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x30,0xcc,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x30,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
-  0x09,0x00,0x31,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x31,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x31,0x08,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x31,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,
-  0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x20,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x31,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x31,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x2c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x31,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x44,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x31,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x31,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x31,0x80,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x31,
-  0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x31,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x8c,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x31,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x31,0xa0,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xa4,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x31,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xb0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x31,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xc8,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x31,0xcc,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x31,
-  0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
-  0x32,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x32,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x32,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x32,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x10,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x32,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x28,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x2c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x32,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,
-  0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x44,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x32,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x32,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x09,0x00,0x32,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x32,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x32,0x84,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x32,0x88,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0x8c,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x32,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,
-  0xa0,0x00,0x21,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0xa4,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x32,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x32,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0xb0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x32,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x32,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0xc8,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x32,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x32,0xd0,0x00,
-  0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x33,0x00,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x33,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x00,0x09,0x00,0x33,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x33,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x10,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x33,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x28,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x33,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x40,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x33,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x4c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x09,0x00,0x33,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x03,0x09,0x00,0x33,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x33,0x84,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x33,0x88,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x33,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0xa0,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x33,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0xac,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0xb0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x33,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,
-  0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x33,0xc8,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x33,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
-  0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x33,0xd0,0x00,0x03,0x00,
-  0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x34,0x00,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x34,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x00,0x09,0x00,0x34,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x0c,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x10,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x34,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,
-  0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x28,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x34,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x34,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x40,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x34,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0x4c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x09,0x00,0x34,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x03,0x09,0x00,0x34,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x34,0x84,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x34,0x88,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x34,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x34,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xa0,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x34,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xac,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x34,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xc4,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x34,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x34,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
-  0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x34,0xd0,0x00,0x03,0x00,0x00,0x00,
-  0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x35,0x00,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x35,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
-  0x00,0x35,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x0c,0x00,0x01,
-  0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
-  0x09,0x00,0x35,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x24,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x35,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x30,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x40,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x35,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,
-  0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x4c,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
-  0x35,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
-  0x00,0x35,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x35,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x35,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x09,0x00,0x35,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0x90,
-  0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0xa0,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x35,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,
-  0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0xac,0x00,0x01,0x00,0x00,
-  0x00,0x00,0x01,0x09,0x00,0x35,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
-  0x35,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x35,0xc4,0x00,0x01,0x00,
-  0x00,0x00,0x00,0x01,0x09,0x00,0x35,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
-  0x00,0x35,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
-  0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x35,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
-  0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x35,0xd0,0x00,0x01,0x00,0x00,0x00,0x00,
-  0x01,0x04,0x00,0x00,0x00,0x00,0x02,0x08,0xe8,0x08,0x00,0x00,0x00,0x06,0x01,0x00,
-  0x09,0x05,0x00,0x02,0x08,0xee,0x04,0x00,0x00,0x00,0x01,0x08,0x00,0x00,0x00,0x22,
-  0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,
-  0x00,0x01,0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x00,0x04,0x38,0x03,0x00,0x00,0x00,
-  0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x03,0x00,0x00,0x04,0x38,0x01,0x09,0x00,0x00,
-  0x0c,0x00,0x03,0x00,0x00,0x08,0x00,0x01,0x09,0x00,0x00,0x10,0x00,0x03,0x00,0x00,
-  0x0c,0x00,0x01,0x09,0x00,0x00,0x20,0x00,0x03,0x00,0x00,0x10,0x00,0x01,0x09,0x00,
-  0x00,0x24,0x38,0x03,0x00,0x00,0x20,0x00,0x01,0x09,0x00,0x00,0x28,0x00,0x03,0x00,
-  0x00,0x24,0x38,0x01,0x09,0x00,0x00,0x2c,0x00,0x03,0x00,0x00,0x28,0x00,0x01,0x09,
-  0x00,0x00,0x30,0x00,0x03,0x00,0x00,0x2c,0x00,0x01,0x09,0x00,0x00,0x40,0x00,0x03,
-  0x00,0x00,0x30,0x00,0x01,0x09,0x00,0x00,0x44,0x14,0x03,0x00,0x00,0x40,0x00,0x01,
-  0x09,0x00,0x00,0x48,0x00,0x03,0x00,0x00,0x44,0x14,0x01,0x09,0x00,0x00,0x4c,0x00,
-  0x03,0x00,0x00,0x48,0x00,0x01,0x09,0x00,0x00,0x50,0x00,0x03,0x00,0x00,0x4c,0x00,
-  0x01,0x09,0x00,0x00,0x80,0x00,0x03,0x00,0x00,0x50,0x00,0x01,0x09,0x00,0x00,0x84,
-  0x00,0x03,0x00,0x00,0x80,0x00,0x01,0x09,0x00,0x00,0x88,0x00,0x03,0x00,0x00,0x84,
-  0x00,0x01,0x09,0x00,0x00,0x8c,0x00,0x03,0x00,0x00,0x88,0x00,0x01,0x09,0x00,0x00,
-  0x90,0x00,0x03,0x00,0x00,0x8c,0x00,0x01,0x09,0x00,0x00,0xa0,0x00,0x03,0x00,0x00,
-  0x90,0x00,0x01,0x09,0x00,0x00,0xa4,0x00,0x03,0x00,0x00,0xa0,0x00,0x01,0x09,0x00,
-  0x00,0xa8,0x00,0x03,0x00,0x00,0xa4,0x00,0x01,0x09,0x00,0x00,0xac,0x00,0x03,0x00,
-  0x00,0xa8,0x00,0x01,0x09,0x00,0x00,0xb0,0x00,0x03,0x00,0x00,0xac,0x00,0x01,0x09,
-  0x00,0x00,0xc0,0x00,0x03,0x00,0x00,0xb0,0x00,0x01,0x09,0x00,0x00,0xc4,0x00,0x03,
-  0x00,0x00,0xc0,0x00,0x01,0x09,0x00,0x00,0xc8,0x00,0x03,0x00,0x00,0xc4,0x00,0x01,
-  0x09,0x00,0x00,0xcc,0x00,0x03,0x00,0x00,0xc8,0x00,0x01,0x09,0x00,0x00,0xd0,0x00,
-  0x03,0x00,0x00,0xcc,0x00,0x01,0x09,0x00,0x01,0x00,0x01,0x03,0x00,0x00,0xd0,0x00,
-  0x01,0x09,0x00,0x01,0x04,0x00,0x03,0x00,0x01,0x00,0x01,0x01,0x09,0x00,0x01,0x08,
-  0x01,0x03,0x00,0x01,0x04,0x00,0x01,0x09,0x00,0x01,0x0c,0x00,0x03,0x00,0x01,0x08,
-  0x01,0x01,0x09,0x00,0x01,0x10,0x00,0x03,0x00,0x01,0x0c,0x00,0x01,0x09,0x00,0x01,
-  0x20,0x00,0x03,0x00,0x01,0x10,0x00,0x01,0x09,0x00,0x01,0x24,0x00,0x03,0x00,0x01,
-  0x20,0x00,0x01,0x09,0x00,0x01,0x28,0x00,0x03,0x00,0x01,0x24,0x00,0x01,0x09,0x00,
-  0x01,0x2c,0x00,0x03,0x00,0x01,0x28,0x00,0x01,0x09,0x00,0x01,0x30,0x00,0x03,0x00,
-  0x01,0x2c,0x00,0x01,0x09,0x00,0x01,0x40,0x00,0x03,0x00,0x01,0x30,0x00,0x01,0x09,
-  0x00,0x01,0x44,0x00,0x03,0x00,0x01,0x40,0x00,0x01,0x09,0x00,0x01,0x48,0x00,0x03,
-  0x00,0x01,0x44,0x00,0x01,0x09,0x00,0x01,0x4c,0x00,0x03,0x00,0x01,0x48,0x00,0x01,
-  0x09,0x00,0x01,0x50,0x00,0x03,0x00,0x01,0x4c,0x00,0x01,0x09,0x00,0x01,0x80,0x00,
-  0x03,0x00,0x01,0x50,0x00,0x01,0x09,0x00,0x01,0x84,0x00,0x03,0x00,0x01,0x80,0x00,
-  0x01,0x09,0x00,0x01,0x88,0x00,0x03,0x00,0x01,0x84,0x00,0x01,0x09,0x00,0x01,0x8c,
-  0x00,0x03,0x00,0x01,0x88,0x00,0x01,0x09,0x00,0x01,0x90,0x00,0x03,0x00,0x01,0x8c,
-  0x00,0x01,0x09,0x00,0x01,0xa0,0x10,0x03,0x00,0x01,0x90,0x00,0x01,0x09,0x00,0x01,
-  0xa4,0x00,0x03,0x00,0x01,0xa0,0x10,0x01,0x09,0x00,0x01,0xa8,0x00,0x03,0x00,0x01,
-  0xa4,0x00,0x01,0x09,0x00,0x01,0xac,0x00,0x03,0x00,0x01,0xa8,0x00,0x01,0x09,0x00,
-  0x01,0xb0,0x00,0x03,0x00,0x01,0xac,0x00,0x01,0x09,0x00,0x01,0xc0,0x00,0x23,0x00,
-  0x01,0xb0,0x00,0x01,0x09,0x00,0x01,0xc4,0x00,0x03,0x00,0x01,0xc0,0x00,0x21,0x09,
-  0x00,0x01,0xc8,0x00,0x03,0x00,0x01,0xc4,0x00,0x01,0x09,0x00,0x01,0xcc,0x00,0x03,
-  0x00,0x01,0xc8,0x00,0x01,0x09,0x00,0x01,0xd0,0x00,0x03,0x00,0x01,0xcc,0x00,0x01,
-  0x09,0x00,0x02,0x00,0x00,0x03,0x00,0x01,0xd0,0x00,0x01,0x09,0x00,0x02,0x04,0x00,
-  0x03,0x00,0x02,0x00,0x00,0x01,0x09,0x00,0x02,0x08,0x00,0x03,0x00,0x02,0x04,0x00,
-  0x01,0x09,0x00,0x02,0x0c,0x00,0x03,0x00,0x02,0x08,0x00,0x01,0x09,0x00,0x02,0x10,
-  0x00,0x03,0x00,0x02,0x0c,0x00,0x01,0x09,0x00,0x02,0x20,0x00,0x03,0x00,0x02,0x10,
-  0x00,0x01,0x09,0x00,0x02,0x24,0x00,0x03,0x00,0x02,0x20,0x00,0x01,0x09,0x00,0x02,
-  0x28,0x00,0x03,0x00,0x02,0x24,0x00,0x01,0x09,0x00,0x02,0x2c,0x00,0x03,0x00,0x02,
-  0x28,0x00,0x01,0x09,0x00,0x02,0x30,0x00,0x03,0x00,0x02,0x2c,0x00,0x01,0x09,0x00,
-  0x02,0x40,0x00,0x03,0x00,0x02,0x30,0x00,0x01,0x09,0x00,0x02,0x44,0x00,0x03,0x00,
-  0x02,0x40,0x00,0x01,0x09,0x00,0x02,0x48,0x00,0x03,0x00,0x02,0x44,0x00,0x01,0x09,
-  0x00,0x02,0x4c,0x00,0x03,0x00,0x02,0x48,0x00,0x01,0x09,0x00,0x02,0x50,0x00,0x03,
-  0x00,0x02,0x4c,0x00,0x01,0x09,0x00,0x02,0x80,0x00,0x03,0x00,0x02,0x50,0x00,0x01,
-  0x09,0x00,0x02,0x84,0x00,0x03,0x00,0x02,0x80,0x00,0x01,0x09,0x00,0x02,0x88,0x00,
-  0x03,0x00,0x02,0x84,0x00,0x01,0x09,0x00,0x02,0x8c,0x00,0x03,0x00,0x02,0x88,0x00,
-  0x01,0x09,0x00,0x02,0x90,0x00,0x03,0x00,0x02,0x8c,0x00,0x01,0x09,0x00,0x02,0xa0,
-  0x00,0x83,0x00,0x02,0x90,0x00,0x01,0x09,0x00,0x02,0xa4,0x00,0x03,0x00,0x02,0xa0,
-  0x00,0x81,0x09,0x00,0x02,0xa8,0x00,0x03,0x00,0x02,0xa4,0x00,0x01,0x09,0x00,0x02,
-  0xac,0x00,0x03,0x00,0x02,0xa8,0x00,0x01,0x09,0x00,0x02,0xb0,0x00,0x03,0x00,0x02,
-  0xac,0x00,0x01,0x09,0x00,0x02,0xc0,0x00,0x03,0x00,0x02,0xb0,0x00,0x01,0x09,0x00,
-  0x02,0xc4,0x00,0x03,0x00,0x02,0xc0,0x00,0x01,0x09,0x00,0x02,0xc8,0x00,0x03,0x00,
-  0x02,0xc4,0x00,0x01,0x09,0x00,0x02,0xcc,0x00,0x03,0x00,0x02,0xc8,0x00,0x01,0x09,
-  0x00,0x02,0xd0,0x00,0x03,0x00,0x02,0xcc,0x00,0x01,0x09,0x00,0x03,0x00,0x01,0x03,
-  0x00,0x02,0xd0,0x00,0x01,0x09,0x00,0x03,0x04,0x03,0x03,0x00,0x03,0x00,0x01,0x01,
-  0x09,0x00,0x03,0x08,0x00,0x03,0x00,0x03,0x04,0x03,0x01,0x09,0x00,0x03,0x0c,0x00,
-  0x03,0x00,0x03,0x08,0x00,0x01,0x09,0x00,0x03,0x10,0x01,0x03,0x00,0x03,0x0c,0x00,
-  0x01,0x09,0x00,0x03,0x20,0x02,0x03,0x00,0x03,0x10,0x01,0x01,0x09,0x00,0x03,0x24,
-  0x03,0x03,0x00,0x03,0x20,0x02,0x01,0x09,0x00,0x03,0x28,0x01,0x03,0x00,0x03,0x24,
-  0x03,0x01,0x09,0x00,0x03,0x2c,0x00,0x03,0x00,0x03,0x28,0x01,0x01,0x09,0x00,0x03,
-  0x30,0x00,0x03,0x00,0x03,0x2c,0x00,0x01,0x09,0x00,0x03,0x40,0x00,0x03,0x00,0x03,
-  0x30,0x00,0x01,0x09,0x00,0x03,0x44,0x00,0x03,0x00,0x03,0x40,0x00,0x01,0x09,0x00,
-  0x03,0x48,0x00,0x03,0x00,0x03,0x44,0x00,0x01,0x09,0x00,0x03,0x4c,0x00,0x03,0x00,
-  0x03,0x48,0x00,0x01,0x09,0x00,0x03,0x50,0x00,0x03,0x00,0x03,0x4c,0x00,0x01,0x09,
-  0x00,0x03,0x80,0x01,0x43,0x00,0x03,0x50,0x00,0x01,0x09,0x00,0x03,0x84,0x02,0x03,
-  0x00,0x03,0x80,0x01,0x41,0x09,0x00,0x03,0x88,0x00,0x03,0x00,0x03,0x84,0x02,0x01,
-  0x09,0x00,0x03,0x8c,0x03,0x03,0x00,0x03,0x88,0x00,0x01,0x09,0x00,0x03,0x90,0x00,
-  0x03,0x00,0x03,0x8c,0x03,0x01,0x09,0x00,0x03,0xa0,0x03,0x03,0x00,0x03,0x90,0x00,
-  0x01,0x09,0x00,0x03,0xa4,0x01,0x03,0x00,0x03,0xa0,0x03,0x01,0x09,0x00,0x03,0xa8,
-  0x00,0x03,0x00,0x03,0xa4,0x01,0x01,0x09,0x00,0x03,0xac,0x00,0x03,0x00,0x03,0xa8,
-  0x00,0x01,0x09,0x00,0x03,0xb0,0x00,0x03,0x00,0x03,0xac,0x00,0x01,0x09,0x00,0x03,
-  0xc0,0x00,0x03,0x00,0x03,0xb0,0x00,0x01,0x09,0x00,0x03,0xc4,0x00,0x03,0x00,0x03,
-  0xc0,0x00,0x01,0x09,0x00,0x03,0xc8,0x00,0x03,0x00,0x03,0xc4,0x00,0x01,0x09,0x00,
-  0x03,0xcc,0x00,0x03,0x00,0x03,0xc8,0x00,0x01,0x09,0x00,0x03,0xd0,0x00,0x03,0x00,
-  0x03,0xcc,0x00,0x01,0x09,0x00,0x04,0x00,0x00,0x03,0x00,0x03,0xd0,0x00,0x01,0x09,
-  0x00,0x04,0x04,0x00,0x03,0x00,0x04,0x00,0x00,0x01,0x09,0x00,0x04,0x08,0x00,0x03,
-  0x00,0x04,0x04,0x00,0x01,0x09,0x00,0x04,0x0c,0x00,0x03,0x00,0x04,0x08,0x00,0x01,
-  0x09,0x00,0x04,0x10,0x00,0x03,0x00,0x04,0x0c,0x00,0x01,0x09,0x00,0x04,0x20,0x00,
-  0x03,0x00,0x04,0x10,0x00,0x01,0x09,0x00,0x04,0x24,0x00,0x03,0x00,0x04,0x20,0x00,
-  0x01,0x09,0x00,0x04,0x28,0x00,0x03,0x00,0x04,0x24,0x00,0x01,0x09,0x00,0x04,0x2c,
-  0x00,0x03,0x00,0x04,0x28,0x00,0x01,0x09,0x00,0x04,0x30,0x00,0x03,0x00,0x04,0x2c,
-  0x00,0x01,0x09,0x00,0x04,0x40,0x00,0x03,0x00,0x04,0x30,0x00,0x01,0x09,0x00,0x04,
-  0x44,0x00,0x03,0x00,0x04,0x40,0x00,0x01,0x09,0x00,0x04,0x48,0x00,0x03,0x00,0x04,
-  0x44,0x00,0x01,0x09,0x00,0x04,0x4c,0x00,0x03,0x00,0x04,0x48,0x00,0x01,0x09,0x00,
-  0x04,0x50,0x00,0x03,0x00,0x04,0x4c,0x00,0x01,0x09,0x00,0x04,0x80,0x00,0x03,0x00,
-  0x04,0x50,0x00,0x01,0x09,0x00,0x04,0x84,0x00,0x03,0x00,0x04,0x80,0x00,0x01,0x09,
-  0x00,0x04,0x88,0x00,0x03,0x00,0x04,0x84,0x00,0x01,0x09,0x00,0x04,0x8c,0x00,0x03,
-  0x00,0x04,0x88,0x00,0x01,0x09,0x00,0x04,0x90,0x00,0x03,0x00,0x04,0x8c,0x00,0x01,
-  0x09,0x00,0x04,0xa0,0x00,0x43,0x00,0x04,0x90,0x00,0x01,0x09,0x00,0x04,0xa4,0x00,
-  0x03,0x00,0x04,0xa0,0x00,0x41,0x09,0x00,0x04,0xa8,0x00,0x03,0x00,0x04,0xa4,0x00,
-  0x01,0x09,0x00,0x04,0xac,0x00,0x03,0x00,0x04,0xa8,0x00,0x01,0x09,0x00,0x04,0xb0,
-  0x00,0x03,0x00,0x04,0xac,0x00,0x01,0x09,0x00,0x04,0xc0,0x00,0x03,0x00,0x04,0xb0,
-  0x00,0x01,0x09,0x00,0x04,0xc4,0x00,0x03,0x00,0x04,0xc0,0x00,0x01,0x09,0x00,0x04,
-  0xc8,0x00,0x03,0x00,0x04,0xc4,0x00,0x01,0x09,0x00,0x04,0xcc,0x00,0x03,0x00,0x04,
-  0xc8,0x00,0x01,0x09,0x00,0x04,0xd0,0x00,0x03,0x00,0x04,0xcc,0x00,0x01,0x09,0x00,
-  0x05,0x00,0xc0,0x13,0x00,0x04,0xd0,0x00,0x01,0x09,0x00,0x05,0x04,0xc0,0x03,0x00,
-  0x05,0x00,0xc0,0x11,0x09,0x00,0x05,0x08,0x40,0x33,0x00,0x05,0x04,0xc0,0x01,0x09,
-  0x00,0x05,0x0c,0x00,0x03,0x00,0x05,0x08,0x40,0x31,0x09,0x00,0x05,0x10,0x80,0x03,
-  0x00,0x05,0x0c,0x00,0x01,0x09,0x00,0x05,0x20,0x00,0x13,0x00,0x05,0x10,0x80,0x01,
-  0x09,0x00,0x05,0x24,0x00,0x13,0x00,0x05,0x20,0x00,0x11,0x09,0x00,0x05,0x28,0x00,
-  0x03,0x00,0x05,0x24,0x00,0x11,0x09,0x00,0x05,0x2c,0x00,0x03,0x00,0x05,0x28,0x00,
-  0x01,0x09,0x00,0x05,0x30,0x00,0x13,0x00,0x05,0x2c,0x00,0x01,0x09,0x00,0x05,0x40,
-  0x20,0x1b,0x00,0x05,0x30,0x00,0x11,0x09,0x00,0x05,0x44,0x20,0x13,0x00,0x05,0x40,
-  0x20,0x19,0x09,0x00,0x05,0x48,0x48,0x0b,0x00,0x05,0x44,0x20,0x11,0x09,0x00,0x05,
-  0x4c,0x00,0x03,0x00,0x05,0x48,0x48,0x09,0x09,0x00,0x05,0x50,0x00,0x13,0x00,0x05,
-  0x4c,0x00,0x01,0x09,0x00,0x05,0x80,0x00,0x23,0x00,0x05,0x50,0x00,0x11,0x01,0x03,
-  0xff,0xfc,0xfc,0xff,0x09,0x00,0x05,0x84,0x00,0x13,0x00,0x05,0x80,0x00,0x21,0x01,
-  0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x05,0x88,0x80,0x03,0x00,0x05,0x84,0x00,0x11,
-  0x09,0x00,0x05,0x8c,0x80,0x03,0x00,0x05,0x88,0x80,0x01,0x09,0x00,0x05,0x90,0x00,
-  0x03,0x00,0x05,0x8c,0x80,0x01,0x09,0x00,0x05,0xa0,0x04,0x03,0x00,0x05,0x90,0x00,
-  0x01,0x09,0x00,0x05,0xa4,0x00,0x03,0x00,0x05,0xa0,0x04,0x01,0x09,0x00,0x05,0xa8,
-  0x00,0x13,0x00,0x05,0xa4,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x13,0x00,0x05,0xa8,
-  0x00,0x11,0x09,0x00,0x05,0xb0,0x00,0x03,0x00,0x05,0xac,0x00,0x11,0x09,0x00,0x05,
-  0xc0,0xc8,0x03,0x00,0x05,0xb0,0x00,0x01,0x09,0x00,0x05,0xc4,0x08,0x0b,0x00,0x05,
-  0xc0,0xc8,0x01,0x09,0x00,0x05,0xc8,0x00,0x13,0x00,0x05,0xc4,0x08,0x09,0x09,0x00,
-  0x05,0xcc,0x00,0x13,0x00,0x05,0xc8,0x00,0x11,0x09,0x00,0x05,0xd0,0x00,0x03,0x00,
-  0x05,0xcc,0x00,0x11,0x09,0x00,0x06,0x03,0x02,0x03,0x00,0x05,0xd0,0x00,0x01,0x09,
-  0x00,0x06,0x07,0x42,0x03,0x00,0x06,0x03,0x02,0x01,0x09,0x00,0x06,0x0b,0x02,0x03,
-  0x00,0x06,0x07,0x42,0x01,0x09,0x00,0x06,0x0f,0x02,0x03,0x00,0x06,0x0b,0x02,0x01,
-  0x09,0x00,0x06,0x13,0x02,0x03,0x00,0x06,0x0f,0x02,0x01,0x09,0x00,0x06,0x23,0x03,
-  0x03,0x00,0x06,0x13,0x02,0x01,0x09,0x00,0x06,0x27,0x03,0x03,0x00,0x06,0x23,0x03,
-  0x01,0x09,0x00,0x06,0x2b,0x03,0x03,0x00,0x06,0x27,0x03,0x01,0x09,0x00,0x06,0x2f,
-  0x01,0x03,0x00,0x06,0x2b,0x03,0x01,0x09,0x00,0x06,0x30,0x00,0x03,0x00,0x06,0x2f,
-  0x01,0x01,0x09,0x00,0x06,0x40,0x00,0x03,0x00,0x06,0x30,0x00,0x01,0x09,0x00,0x06,
-  0x44,0x00,0x03,0x00,0x06,0x40,0x00,0x01,0x09,0x00,0x06,0x48,0x00,0x03,0x00,0x06,
-  0x44,0x00,0x01,0x09,0x00,0x06,0x4c,0x00,0x03,0x00,0x06,0x48,0x00,0x01,0x09,0x00,
-  0x06,0x50,0x00,0x03,0x00,0x06,0x4c,0x00,0x01,0x09,0x00,0x06,0x80,0x04,0x03,0x00,
-  0x06,0x50,0x00,0x01,0x09,0x00,0x06,0x84,0x00,0x03,0x00,0x06,0x80,0x04,0x01,0x09,
-  0x00,0x06,0x88,0x00,0x03,0x00,0x06,0x84,0x00,0x01,0x09,0x00,0x06,0x8c,0x00,0x03,
-  0x00,0x06,0x88,0x00,0x01,0x09,0x00,0x06,0x90,0x00,0x03,0x00,0x06,0x8c,0x00,0x01,
-  0x09,0x00,0x06,0xa0,0x00,0x03,0x00,0x06,0x90,0x00,0x01,0x09,0x00,0x06,0xa4,0x00,
-  0x03,0x00,0x06,0xa0,0x00,0x01,0x09,0x00,0x06,0xa8,0x00,0x03,0x00,0x06,0xa4,0x00,
-  0x01,0x09,0x00,0x06,0xac,0x00,0x03,0x00,0x06,0xa8,0x00,0x01,0x09,0x00,0x06,0xb0,
-  0x00,0x03,0x00,0x06,0xac,0x00,0x01,0x09,0x00,0x06,0xc0,0x00,0x03,0x00,0x06,0xb0,
-  0x00,0x01,0x09,0x00,0x06,0xc4,0x00,0x03,0x00,0x06,0xc0,0x00,0x01,0x09,0x00,0x06,
-  0xc8,0x40,0x03,0x00,0x06,0xc4,0x00,0x01,0x09,0x00,0x06,0xcc,0x80,0x03,0x00,0x06,
-  0xc8,0x40,0x01,0x09,0x00,0x06,0xd0,0x00,0x03,0x00,0x06,0xcc,0x80,0x01,0x09,0x00,
-  0x07,0x02,0x02,0x03,0x00,0x06,0xd0,0x00,0x01,0x09,0x00,0x07,0x07,0x02,0x03,0x00,
-  0x07,0x02,0x02,0x01,0x09,0x00,0x07,0x0b,0x02,0x03,0x00,0x07,0x07,0x02,0x01,0x09,
-  0x00,0x07,0x0f,0x02,0x03,0x00,0x07,0x0b,0x02,0x01,0x09,0x00,0x07,0x11,0x02,0x03,
-  0x00,0x07,0x0f,0x02,0x01,0x09,0x00,0x07,0x23,0x03,0x03,0x00,0x07,0x11,0x02,0x01,
-  0x09,0x00,0x07,0x27,0x03,0x03,0x00,0x07,0x23,0x03,0x01,0x09,0x00,0x07,0x2b,0x03,
-  0x03,0x00,0x07,0x27,0x03,0x01,0x09,0x00,0x07,0x2f,0x01,0x03,0x00,0x07,0x2b,0x03,
-  0x01,0x09,0x00,0x07,0x30,0x00,0x03,0x00,0x07,0x2f,0x01,0x01,0x09,0x00,0x07,0x40,
-  0x00,0x03,0x00,0x07,0x30,0x00,0x01,0x09,0x00,0x07,0x44,0x00,0x03,0x00,0x07,0x40,
-  0x00,0x01,0x09,0x00,0x07,0x48,0x00,0x03,0x00,0x07,0x44,0x00,0x01,0x09,0x00,0x07,
-  0x4c,0x00,0x03,0x00,0x07,0x48,0x00,0x01,0x09,0x00,0x07,0x50,0x00,0x03,0x00,0x07,
-  0x4c,0x00,0x01,0x09,0x00,0x07,0x82,0x00,0x03,0x00,0x07,0x50,0x00,0x01,0x09,0x00,
-  0x07,0x86,0x02,0x03,0x00,0x07,0x82,0x00,0x01,0x09,0x00,0x07,0x89,0x02,0x03,0x00,
-  0x07,0x86,0x02,0x01,0x09,0x00,0x07,0x8d,0x02,0x03,0x00,0x07,0x89,0x02,0x01,0x09,
-  0x00,0x07,0x91,0x02,0x03,0x00,0x07,0x8d,0x02,0x01,0x09,0x00,0x07,0xa0,0x02,0x03,
-  0x00,0x07,0x91,0x02,0x01,0x09,0x00,0x07,0xa5,0x02,0x03,0x00,0x07,0xa0,0x02,0x01,
-  0x09,0x00,0x07,0xab,0x02,0x03,0x00,0x07,0xa5,0x02,0x01,0x09,0x00,0x07,0xad,0x00,
-  0x03,0x00,0x07,0xab,0x02,0x01,0x09,0x00,0x07,0xb0,0x00,0x03,0x00,0x07,0xad,0x00,
-  0x01,0x09,0x00,0x07,0xc0,0x04,0x03,0x00,0x07,0xb0,0x00,0x01,0x09,0x00,0x07,0xc4,
-  0x00,0x03,0x00,0x07,0xc0,0x04,0x01,0x09,0x00,0x07,0xc8,0x00,0x03,0x00,0x07,0xc4,
-  0x00,0x01,0x09,0x00,0x07,0xcc,0x00,0x03,0x00,0x07,0xc8,0x00,0x01,0x09,0x00,0x07,
-  0xd0,0x00,0x03,0x00,0x07,0xcc,0x00,0x01,0x09,0x00,0x08,0x00,0x02,0x03,0x00,0x07,
-  0xd0,0x00,0x01,0x09,0x00,0x08,0x04,0x00,0x03,0x00,0x08,0x00,0x02,0x01,0x09,0x00,
-  0x08,0x08,0x00,0x03,0x00,0x08,0x04,0x00,0x01,0x09,0x00,0x08,0x0e,0x00,0x03,0x00,
-  0x08,0x08,0x00,0x01,0x09,0x00,0x08,0x10,0x00,0x03,0x00,0x08,0x0e,0x00,0x01,0x09,
-  0x00,0x08,0x23,0x01,0x03,0x00,0x08,0x10,0x00,0x01,0x09,0x00,0x08,0x26,0x01,0x03,
-  0x00,0x08,0x23,0x01,0x01,0x09,0x00,0x08,0x28,0x01,0x03,0x00,0x08,0x26,0x01,0x01,
-  0x09,0x00,0x08,0x2e,0x01,0x03,0x00,0x08,0x28,0x01,0x01,0x09,0x00,0x08,0x30,0x00,
-  0x03,0x00,0x08,0x2e,0x01,0x01,0x09,0x00,0x08,0x40,0x00,0x03,0x00,0x08,0x30,0x00,
-  0x01,0x09,0x00,0x08,0x44,0x00,0x03,0x00,0x08,0x40,0x00,0x01,0x09,0x00,0x08,0x48,
-  0x00,0x03,0x00,0x08,0x44,0x00,0x01,0x09,0x00,0x08,0x4c,0x00,0x03,0x00,0x08,0x48,
-  0x00,0x01,0x09,0x00,0x08,0x50,0x00,0x03,0x00,0x08,0x4c,0x00,0x01,0x09,0x00,0x08,
-  0x80,0x00,0x03,0x00,0x08,0x50,0x00,0x01,0x09,0x00,0x08,0x84,0x00,0x03,0x00,0x08,
-  0x80,0x00,0x01,0x09,0x00,0x08,0x88,0x00,0x03,0x00,0x08,0x84,0x00,0x01,0x09,0x00,
-  0x08,0x8c,0x00,0x03,0x00,0x08,0x88,0x00,0x01,0x09,0x00,0x08,0x90,0x00,0x03,0x00,
-  0x08,0x8c,0x00,0x01,0x09,0x00,0x08,0xa0,0x80,0x03,0x00,0x08,0x90,0x00,0x01,0x09,
-  0x00,0x08,0xa4,0x00,0x03,0x00,0x08,0xa0,0x80,0x01,0x09,0x00,0x08,0xa8,0x00,0x03,
-  0x00,0x08,0xa4,0x00,0x01,0x09,0x00,0x08,0xac,0x00,0x03,0x00,0x08,0xa8,0x00,0x01,
-  0x09,0x00,0x08,0xb0,0x00,0x03,0x00,0x08,0xac,0x00,0x01,0x09,0x00,0x08,0xc0,0x00,
-  0x03,0x00,0x08,0xb0,0x00,0x01,0x09,0x00,0x08,0xc4,0x00,0x03,0x00,0x08,0xc0,0x00,
-  0x01,0x09,0x00,0x08,0xc8,0x00,0x03,0x00,0x08,0xc4,0x00,0x01,0x09,0x00,0x08,0xcc,
-  0x00,0x03,0x00,0x08,0xc8,0x00,0x01,0x09,0x00,0x08,0xd0,0x00,0x03,0x00,0x08,0xcc,
-  0x00,0x01,0x09,0x00,0x09,0x00,0x00,0x03,0x00,0x08,0xd0,0x00,0x01,0x09,0x00,0x09,
-  0x04,0x00,0x03,0x00,0x09,0x00,0x00,0x01,0x09,0x00,0x09,0x08,0x00,0x03,0x00,0x09,
-  0x04,0x00,0x01,0x09,0x00,0x09,0x0c,0x00,0x03,0x00,0x09,0x08,0x00,0x01,0x09,0x00,
-  0x09,0x10,0x00,0x03,0x00,0x09,0x0c,0x00,0x01,0x09,0x00,0x09,0x20,0x00,0x03,0x00,
-  0x09,0x10,0x00,0x01,0x09,0x00,0x09,0x26,0x00,0x03,0x00,0x09,0x20,0x00,0x01,0x09,
-  0x00,0x09,0x28,0x01,0x03,0x00,0x09,0x26,0x00,0x01,0x09,0x00,0x09,0x2e,0x01,0x03,
-  0x00,0x09,0x28,0x01,0x01,0x09,0x00,0x09,0x30,0x00,0x03,0x00,0x09,0x2e,0x01,0x01,
-  0x09,0x00,0x09,0x40,0x00,0x03,0x00,0x09,0x30,0x00,0x01,0x09,0x00,0x09,0x44,0x00,
-  0x03,0x00,0x09,0x40,0x00,0x01,0x09,0x00,0x09,0x48,0x00,0x03,0x00,0x09,0x44,0x00,
-  0x01,0x09,0x00,0x09,0x4c,0x00,0x03,0x00,0x09,0x48,0x00,0x01,0x09,0x00,0x09,0x50,
-  0x00,0x03,0x00,0x09,0x4c,0x00,0x01,0x09,0x00,0x09,0x80,0x10,0x03,0x00,0x09,0x50,
-  0x00,0x01,0x09,0x00,0x09,0x84,0x00,0x03,0x00,0x09,0x80,0x10,0x01,0x09,0x00,0x09,
-  0x88,0x00,0x03,0x00,0x09,0x84,0x00,0x01,0x09,0x00,0x09,0x8c,0x00,0x03,0x00,0x09,
-  0x88,0x00,0x01,0x09,0x00,0x09,0x90,0x00,0x03,0x00,0x09,0x8c,0x00,0x01,0x09,0x00,
-  0x09,0xa0,0x00,0x03,0x00,0x09,0x90,0x00,0x01,0x09,0x00,0x09,0xa4,0x00,0x03,0x00,
-  0x09,0xa0,0x00,0x01,0x09,0x00,0x09,0xa8,0x00,0x03,0x00,0x09,0xa4,0x00,0x01,0x09,
-  0x00,0x09,0xac,0x00,0x03,0x00,0x09,0xa8,0x00,0x01,0x09,0x00,0x09,0xb0,0x00,0x03,
-  0x00,0x09,0xac,0x00,0x01,0x09,0x00,0x09,0xc0,0x00,0x03,0x00,0x09,0xb0,0x00,0x01,
-  0x09,0x00,0x09,0xc4,0x00,0x03,0x00,0x09,0xc0,0x00,0x01,0x09,0x00,0x09,0xc8,0x00,
-  0x03,0x00,0x09,0xc4,0x00,0x01,0x09,0x00,0x09,0xcc,0x00,0x03,0x00,0x09,0xc8,0x00,
-  0x01,0x09,0x00,0x09,0xd0,0x00,0x03,0x00,0x09,0xcc,0x00,0x01,0x09,0x00,0x0a,0x00,
-  0x00,0x03,0x00,0x09,0xd0,0x00,0x01,0x09,0x00,0x0a,0x04,0x00,0x03,0x00,0x0a,0x00,
-  0x00,0x01,0x09,0x00,0x0a,0x08,0x00,0x03,0x00,0x0a,0x04,0x00,0x01,0x09,0x00,0x0a,
-  0x0c,0x00,0x03,0x00,0x0a,0x08,0x00,0x01,0x09,0x00,0x0a,0x10,0x00,0x03,0x00,0x0a,
-  0x0c,0x00,0x01,0x09,0x00,0x0a,0x20,0x00,0x03,0x00,0x0a,0x10,0x00,0x01,0x09,0x00,
-  0x0a,0x26,0x00,0x03,0x00,0x0a,0x20,0x00,0x01,0x09,0x00,0x0a,0x28,0x01,0x03,0x00,
-  0x0a,0x26,0x00,0x01,0x09,0x00,0x0a,0x2c,0x01,0x03,0x00,0x0a,0x28,0x01,0x01,0x09,
-  0x00,0x0a,0x30,0x00,0x03,0x00,0x0a,0x2c,0x01,0x01,0x09,0x00,0x0a,0x40,0x00,0x03,
-  0x00,0x0a,0x30,0x00,0x01,0x09,0x00,0x0a,0x44,0x00,0x03,0x00,0x0a,0x40,0x00,0x01,
-  0x09,0x00,0x0a,0x48,0x00,0x03,0x00,0x0a,0x44,0x00,0x01,0x09,0x00,0x0a,0x4c,0x00,
-  0x03,0x00,0x0a,0x48,0x00,0x01,0x09,0x00,0x0a,0x50,0x00,0x03,0x00,0x0a,0x4c,0x00,
-  0x01,0x09,0x00,0x0a,0x80,0x00,0x03,0x00,0x0a,0x50,0x00,0x01,0x09,0x00,0x0a,0x84,
-  0x00,0x03,0x00,0x0a,0x80,0x00,0x01,0x09,0x00,0x0a,0x88,0x00,0x03,0x00,0x0a,0x84,
-  0x00,0x01,0x09,0x00,0x0a,0x8c,0x00,0x03,0x00,0x0a,0x88,0x00,0x01,0x09,0x00,0x0a,
-  0x90,0x00,0x03,0x00,0x0a,0x8c,0x00,0x01,0x09,0x00,0x0a,0xa0,0x00,0x03,0x00,0x0a,
-  0x90,0x00,0x01,0x09,0x00,0x0a,0xa4,0x00,0x03,0x00,0x0a,0xa0,0x00,0x01,0x09,0x00,
-  0x0a,0xa8,0x00,0x03,0x00,0x0a,0xa4,0x00,0x01,0x09,0x00,0x0a,0xac,0x00,0x03,0x00,
-  0x0a,0xa8,0x00,0x01,0x09,0x00,0x0a,0xb0,0x00,0x03,0x00,0x0a,0xac,0x00,0x01,0x09,
-  0x00,0x0a,0xc0,0x00,0x43,0x00,0x0a,0xb0,0x00,0x01,0x09,0x00,0x0a,0xc4,0x00,0x03,
-  0x00,0x0a,0xc0,0x00,0x41,0x09,0x00,0x0a,0xc8,0x00,0x03,0x00,0x0a,0xc4,0x00,0x01,
-  0x09,0x00,0x0a,0xcc,0x00,0x03,0x00,0x0a,0xc8,0x00,0x01,0x09,0x00,0x0a,0xd0,0x00,
-  0x03,0x00,0x0a,0xcc,0x00,0x01,0x09,0x00,0x0b,0x00,0x00,0x03,0x00,0x0a,0xd0,0x00,
-  0x01,0x09,0x00,0x0b,0x04,0x00,0x03,0x00,0x0b,0x00,0x00,0x01,0x09,0x00,0x0b,0x0a,
-  0x00,0x03,0x00,0x0b,0x04,0x00,0x01,0x09,0x00,0x0b,0x0c,0x00,0x03,0x00,0x0b,0x0a,
-  0x00,0x01,0x09,0x00,0x0b,0x10,0x00,0x03,0x00,0x0b,0x0c,0x00,0x01,0x09,0x00,0x0b,
-  0x22,0x01,0x03,0x00,0x0b,0x10,0x00,0x01,0x09,0x00,0x0b,0x26,0x01,0x03,0x00,0x0b,
-  0x22,0x01,0x01,0x09,0x00,0x0b,0x28,0x01,0x03,0x00,0x0b,0x26,0x01,0x01,0x09,0x00,
-  0x0b,0x2e,0x01,0x03,0x00,0x0b,0x28,0x01,0x01,0x09,0x00,0x0b,0x30,0x00,0x03,0x00,
-  0x0b,0x2e,0x01,0x01,0x09,0x00,0x0b,0x40,0x00,0x03,0x00,0x0b,0x30,0x00,0x01,0x09,
-  0x00,0x0b,0x44,0x00,0x03,0x00,0x0b,0x40,0x00,0x01,0x09,0x00,0x0b,0x48,0x00,0x03,
-  0x00,0x0b,0x44,0x00,0x01,0x09,0x00,0x0b,0x4c,0x00,0x03,0x00,0x0b,0x48,0x00,0x01,
-  0x09,0x00,0x0b,0x50,0x00,0x03,0x00,0x0b,0x4c,0x00,0x01,0x09,0x00,0x0b,0x80,0x00,
-  0x03,0x00,0x0b,0x50,0x00,0x01,0x09,0x00,0x0b,0x84,0x00,0x03,0x00,0x0b,0x80,0x00,
-  0x01,0x09,0x00,0x0b,0x88,0x00,0x03,0x00,0x0b,0x84,0x00,0x01,0x09,0x00,0x0b,0x8c,
-  0x00,0x03,0x00,0x0b,0x88,0x00,0x01,0x09,0x00,0x0b,0x90,0x00,0x03,0x00,0x0b,0x8c,
-  0x00,0x01,0x09,0x00,0x0b,0xa0,0x20,0x03,0x00,0x0b,0x90,0x00,0x01,0x09,0x00,0x0b,
-  0xa4,0x00,0x03,0x00,0x0b,0xa0,0x20,0x01,0x09,0x00,0x0b,0xa8,0x00,0x03,0x00,0x0b,
-  0xa4,0x00,0x01,0x09,0x00,0x0b,0xac,0x00,0x03,0x00,0x0b,0xa8,0x00,0x01,0x09,0x00,
-  0x0b,0xb0,0x00,0x03,0x00,0x0b,0xac,0x00,0x01,0x09,0x00,0x0b,0xc0,0x00,0x03,0x00,
-  0x0b,0xb0,0x00,0x01,0x09,0x00,0x0b,0xc4,0x00,0x03,0x00,0x0b,0xc0,0x00,0x01,0x09,
-  0x00,0x0b,0xc8,0x00,0x03,0x00,0x0b,0xc4,0x00,0x01,0x09,0x00,0x0b,0xcc,0x00,0x03,
-  0x00,0x0b,0xc8,0x00,0x01,0x09,0x00,0x0b,0xd0,0x00,0x03,0x00,0x0b,0xcc,0x00,0x01,
-  0x09,0x00,0x0c,0x00,0x00,0x03,0x00,0x0b,0xd0,0x00,0x01,0x09,0x00,0x0c,0x04,0x00,
-  0x03,0x00,0x0c,0x00,0x00,0x01,0x09,0x00,0x0c,0x08,0x00,0x03,0x00,0x0c,0x04,0x00,
-  0x01,0x09,0x00,0x0c,0x0c,0x00,0x03,0x00,0x0c,0x08,0x00,0x01,0x09,0x00,0x0c,0x10,
-  0x00,0x03,0x00,0x0c,0x0c,0x00,0x01,0x09,0x00,0x0c,0x20,0x00,0x03,0x00,0x0c,0x10,
-  0x00,0x01,0x09,0x00,0x0c,0x24,0x00,0x03,0x00,0x0c,0x20,0x00,0x01,0x09,0x00,0x0c,
-  0x28,0x00,0x03,0x00,0x0c,0x24,0x00,0x01,0x09,0x00,0x0c,0x2c,0x00,0x03,0x00,0x0c,
-  0x28,0x00,0x01,0x09,0x00,0x0c,0x30,0x00,0x03,0x00,0x0c,0x2c,0x00,0x01,0x09,0x00,
-  0x0c,0x40,0x00,0x03,0x00,0x0c,0x30,0x00,0x01,0x09,0x00,0x0c,0x44,0x00,0x03,0x00,
-  0x0c,0x40,0x00,0x01,0x09,0x00,0x0c,0x48,0x00,0x03,0x00,0x0c,0x44,0x00,0x01,0x09,
-  0x00,0x0c,0x4c,0x00,0x03,0x00,0x0c,0x48,0x00,0x01,0x09,0x00,0x0c,0x50,0x00,0x03,
-  0x00,0x0c,0x4c,0x00,0x01,0x09,0x00,0x0c,0x80,0x00,0x83,0x00,0x0c,0x50,0x00,0x01,
-  0x09,0x00,0x0c,0x84,0x00,0x03,0x00,0x0c,0x80,0x00,0x81,0x09,0x00,0x0c,0x88,0x00,
-  0x03,0x00,0x0c,0x84,0x00,0x01,0x09,0x00,0x0c,0x8c,0x00,0x03,0x00,0x0c,0x88,0x00,
-  0x01,0x09,0x00,0x0c,0x90,0x00,0x03,0x00,0x0c,0x8c,0x00,0x01,0x09,0x00,0x0c,0xa0,
-  0x00,0x03,0x00,0x0c,0x90,0x00,0x01,0x09,0x00,0x0c,0xa4,0x00,0x03,0x00,0x0c,0xa0,
-  0x00,0x01,0x09,0x00,0x0c,0xa8,0x00,0x03,0x00,0x0c,0xa4,0x00,0x01,0x09,0x00,0x0c,
-  0xac,0x00,0x03,0x00,0x0c,0xa8,0x00,0x01,0x09,0x00,0x0c,0xb0,0x00,0x03,0x00,0x0c,
-  0xac,0x00,0x01,0x09,0x00,0x0c,0xc0,0x00,0x03,0x00,0x0c,0xb0,0x00,0x01,0x09,0x00,
-  0x0c,0xc4,0x00,0x03,0x00,0x0c,0xc0,0x00,0x01,0x09,0x00,0x0c,0xc8,0x00,0x03,0x00,
-  0x0c,0xc4,0x00,0x01,0x09,0x00,0x0c,0xcc,0x00,0x03,0x00,0x0c,0xc8,0x00,0x01,0x09,
-  0x00,0x0c,0xd0,0x00,0x03,0x00,0x0c,0xcc,0x00,0x01,0x09,0x00,0x0d,0x03,0x02,0x03,
-  0x00,0x0c,0xd0,0x00,0x01,0x09,0x00,0x0d,0x07,0x02,0x03,0x00,0x0d,0x03,0x02,0x01,
-  0x09,0x00,0x0d,0x0b,0x02,0x03,0x00,0x0d,0x07,0x02,0x01,0x09,0x00,0x0d,0x0f,0x02,
-  0x03,0x00,0x0d,0x0b,0x02,0x01,0x09,0x00,0x0d,0x13,0x02,0x03,0x00,0x0d,0x0f,0x02,
-  0x01,0x09,0x00,0x0d,0x23,0x03,0x03,0x00,0x0d,0x13,0x02,0x01,0x09,0x00,0x0d,0x27,
-  0x07,0x03,0x00,0x0d,0x23,0x03,0x01,0x09,0x00,0x0d,0x2b,0x03,0x03,0x00,0x0d,0x27,
-  0x07,0x01,0x09,0x00,0x0d,0x2f,0x01,0x03,0x00,0x0d,0x2b,0x03,0x01,0x09,0x00,0x0d,
-  0x30,0x00,0x03,0x00,0x0d,0x2f,0x01,0x01,0x09,0x00,0x0d,0x40,0x00,0x03,0x00,0x0d,
-  0x30,0x00,0x01,0x09,0x00,0x0d,0x44,0x00,0x03,0x00,0x0d,0x40,0x00,0x01,0x09,0x00,
-  0x0d,0x48,0x00,0x03,0x00,0x0d,0x44,0x00,0x01,0x09,0x00,0x0d,0x4c,0x00,0x03,0x00,
-  0x0d,0x48,0x00,0x01,0x09,0x00,0x0d,0x50,0x00,0x03,0x00,0x0d,0x4c,0x00,0x01,0x09,
-  0x00,0x0d,0x80,0x04,0x03,0x00,0x0d,0x50,0x00,0x01,0x09,0x00,0x0d,0x84,0x00,0x03,
-  0x00,0x0d,0x80,0x04,0x01,0x09,0x00,0x0d,0x88,0x00,0x03,0x00,0x0d,0x84,0x00,0x01,
-  0x09,0x00,0x0d,0x8c,0x00,0x03,0x00,0x0d,0x88,0x00,0x01,0x09,0x00,0x0d,0x90,0x00,
-  0x03,0x00,0x0d,0x8c,0x00,0x01,0x09,0x00,0x0d,0xa0,0x00,0x03,0x00,0x0d,0x90,0x00,
-  0x01,0x09,0x00,0x0d,0xa4,0x00,0x03,0x00,0x0d,0xa0,0x00,0x01,0x09,0x00,0x0d,0xa8,
-  0x00,0x03,0x00,0x0d,0xa4,0x00,0x01,0x09,0x00,0x0d,0xac,0x00,0x03,0x00,0x0d,0xa8,
-  0x00,0x01,0x09,0x00,0x0d,0xb0,0x00,0x03,0x00,0x0d,0xac,0x00,0x01,0x09,0x00,0x0d,
-  0xc0,0x00,0x03,0x00,0x0d,0xb0,0x00,0x01,0x09,0x00,0x0d,0xc4,0x00,0x03,0x00,0x0d,
-  0xc0,0x00,0x01,0x09,0x00,0x0d,0xc8,0x00,0x03,0x00,0x0d,0xc4,0x00,0x01,0x09,0x00,
-  0x0d,0xcc,0x00,0x03,0x00,0x0d,0xc8,0x00,0x01,0x09,0x00,0x0d,0xd0,0x00,0x03,0x00,
-  0x0d,0xcc,0x00,0x01,0x09,0x00,0x0e,0x00,0x00,0x03,0x00,0x0d,0xd0,0x00,0x01,0x09,
-  0x00,0x0e,0x04,0xc0,0x03,0x00,0x0e,0x00,0x00,0x01,0x09,0x00,0x0e,0x08,0x00,0x03,
-  0x00,0x0e,0x04,0xc0,0x01,0x09,0x00,0x0e,0x0c,0x80,0x03,0x00,0x0e,0x08,0x00,0x01,
-  0x09,0x00,0x0e,0x10,0x00,0x03,0x00,0x0e,0x0c,0x80,0x01,0x09,0x00,0x0e,0x20,0x00,
-  0x03,0x00,0x0e,0x10,0x00,0x01,0x09,0x00,0x0e,0x24,0x00,0x13,0x00,0x0e,0x20,0x00,
-  0x01,0x09,0x00,0x0e,0x28,0x00,0x03,0x00,0x0e,0x24,0x00,0x11,0x09,0x00,0x0e,0x2c,
-  0x00,0x13,0x00,0x0e,0x28,0x00,0x01,0x09,0x00,0x0e,0x30,0x00,0x03,0x00,0x0e,0x2c,
-  0x00,0x11,0x09,0x00,0x0e,0x40,0x60,0x03,0x00,0x0e,0x30,0x00,0x01,0x09,0x00,0x0e,
-  0x44,0x48,0x13,0x00,0x0e,0x40,0x60,0x01,0x09,0x00,0x0e,0x48,0xc0,0x03,0x00,0x0e,
-  0x44,0x48,0x11,0x09,0x00,0x0e,0x4c,0x80,0x13,0x00,0x0e,0x48,0xc0,0x01,0x09,0x00,
-  0x0e,0x50,0x00,0x03,0x00,0x0e,0x4c,0x80,0x11,0x09,0x00,0x0e,0x80,0x00,0x03,0x00,
-  0x0e,0x50,0x00,0x01,0x09,0x00,0x0e,0x84,0x00,0x23,0x00,0x0e,0x80,0x00,0x01,0x09,
-  0x00,0x0e,0x88,0x40,0x13,0x00,0x0e,0x84,0x00,0x21,0x09,0x00,0x0e,0x8c,0x00,0x03,
-  0x00,0x0e,0x88,0x40,0x11,0x09,0x00,0x0e,0x90,0x00,0x03,0x00,0x0e,0x8c,0x00,0x01,
-  0x09,0x00,0x0e,0xa0,0x00,0x03,0x00,0x0e,0x90,0x00,0x01,0x09,0x00,0x0e,0xa4,0x00,
-  0x03,0x00,0x0e,0xa0,0x00,0x01,0x09,0x00,0x0e,0xa8,0x00,0x03,0x00,0x0e,0xa4,0x00,
-  0x01,0x09,0x00,0x0e,0xac,0x00,0x03,0x00,0x0e,0xa8,0x00,0x01,0x09,0x00,0x0e,0xb0,
-  0x00,0x03,0x00,0x0e,0xac,0x00,0x01,0x09,0x00,0x0e,0xc0,0x00,0x03,0x00,0x0e,0xb0,
-  0x00,0x01,0x09,0x00,0x0e,0xc4,0xa0,0x03,0x00,0x0e,0xc0,0x00,0x01,0x09,0x00,0x0e,
-  0xc8,0x08,0x0b,0x00,0x0e,0xc4,0xa0,0x01,0x09,0x00,0x0e,0xcc,0x00,0x03,0x00,0x0e,
-  0xc8,0x08,0x09,0x09,0x00,0x0e,0xd0,0x00,0x03,0x00,0x0e,0xcc,0x00,0x01,0x09,0x00,
-  0x0f,0x00,0x02,0x03,0x00,0x0e,0xd0,0x00,0x01,0x09,0x00,0x0f,0x04,0x00,0x03,0x00,
-  0x0f,0x00,0x02,0x01,0x09,0x00,0x0f,0x0a,0x00,0x03,0x00,0x0f,0x04,0x00,0x01,0x09,
-  0x00,0x0f,0x0c,0x00,0x03,0x00,0x0f,0x0a,0x00,0x01,0x09,0x00,0x0f,0x12,0x00,0x03,
-  0x00,0x0f,0x0c,0x00,0x01,0x09,0x00,0x0f,0x20,0x01,0x03,0x00,0x0f,0x12,0x00,0x01,
-  0x09,0x00,0x0f,0x26,0x01,0x03,0x00,0x0f,0x20,0x01,0x01,0x09,0x00,0x0f,0x28,0x01,
-  0x03,0x00,0x0f,0x26,0x01,0x01,0x09,0x00,0x0f,0x2c,0x01,0x03,0x00,0x0f,0x28,0x01,
-  0x01,0x09,0x00,0x0f,0x30,0x00,0x03,0x00,0x0f,0x2c,0x01,0x01,0x09,0x00,0x0f,0x40,
-  0x00,0x03,0x00,0x0f,0x30,0x00,0x01,0x09,0x00,0x0f,0x44,0x00,0x03,0x00,0x0f,0x40,
-  0x00,0x01,0x09,0x00,0x0f,0x48,0x00,0x03,0x00,0x0f,0x44,0x00,0x01,0x09,0x00,0x0f,
-  0x4c,0x00,0x03,0x00,0x0f,0x48,0x00,0x01,0x09,0x00,0x0f,0x50,0x00,0x03,0x00,0x0f,
-  0x4c,0x00,0x01,0x09,0x00,0x0f,0x80,0x00,0x03,0x00,0x0f,0x50,0x00,0x01,0x09,0x00,
-  0x0f,0x84,0x00,0x03,0x00,0x0f,0x80,0x00,0x01,0x09,0x00,0x0f,0x88,0x00,0x03,0x00,
-  0x0f,0x84,0x00,0x01,0x09,0x00,0x0f,0x8c,0x00,0x03,0x00,0x0f,0x88,0x00,0x01,0x09,
-  0x00,0x0f,0x90,0x00,0x03,0x00,0x0f,0x8c,0x00,0x01,0x09,0x00,0x0f,0xa0,0x00,0x03,
-  0x00,0x0f,0x90,0x00,0x01,0x09,0x00,0x0f,0xa4,0x00,0x03,0x00,0x0f,0xa0,0x00,0x01,
-  0x09,0x00,0x0f,0xa8,0x00,0x03,0x00,0x0f,0xa4,0x00,0x01,0x09,0x00,0x0f,0xac,0x00,
-  0x03,0x00,0x0f,0xa8,0x00,0x01,0x09,0x00,0x0f,0xb0,0x00,0x03,0x00,0x0f,0xac,0x00,
-  0x01,0x09,0x00,0x0f,0xc0,0x10,0x03,0x00,0x0f,0xb0,0x00,0x01,0x09,0x00,0x0f,0xc4,
-  0x00,0x03,0x00,0x0f,0xc0,0x10,0x01,0x09,0x00,0x0f,0xc8,0x00,0x03,0x00,0x0f,0xc4,
-  0x00,0x01,0x09,0x00,0x0f,0xcc,0x00,0x03,0x00,0x0f,0xc8,0x00,0x01,0x09,0x00,0x0f,
-  0xd0,0x00,0x03,0x00,0x0f,0xcc,0x00,0x01,0x09,0x00,0x10,0x01,0x82,0x03,0x00,0x0f,
-  0xd0,0x00,0x01,0x09,0x00,0x10,0x05,0x82,0x03,0x00,0x10,0x01,0x82,0x01,0x09,0x00,
-  0x10,0x0a,0x82,0x03,0x00,0x10,0x05,0x82,0x01,0x09,0x00,0x10,0x0c,0x82,0x03,0x00,
-  0x10,0x0a,0x82,0x01,0x09,0x00,0x10,0x12,0x82,0x03,0x00,0x10,0x0c,0x82,0x01,0x09,
-  0x00,0x10,0x20,0x03,0x13,0x00,0x10,0x12,0x82,0x01,0x09,0x00,0x10,0x26,0x03,0x13,
-  0x00,0x10,0x20,0x03,0x11,0x09,0x00,0x10,0x2a,0x03,0x13,0x00,0x10,0x26,0x03,0x11,
-  0x09,0x00,0x10,0x2c,0x01,0x13,0x00,0x10,0x2a,0x03,0x11,0x09,0x00,0x10,0x30,0x00,
-  0x13,0x00,0x10,0x2c,0x01,0x11,0x09,0x00,0x10,0x40,0x00,0x13,0x00,0x10,0x30,0x00,
-  0x11,0x09,0x00,0x10,0x44,0x00,0x13,0x00,0x10,0x40,0x00,0x11,0x09,0x00,0x10,0x48,
-  0x00,0x13,0x00,0x10,0x44,0x00,0x11,0x09,0x00,0x10,0x4c,0x00,0x13,0x00,0x10,0x48,
-  0x00,0x11,0x09,0x00,0x10,0x50,0x00,0x13,0x00,0x10,0x4c,0x00,0x11,0x09,0x00,0x10,
-  0x80,0x00,0x03,0x00,0x10,0x50,0x00,0x11,0x09,0x00,0x10,0x84,0x00,0x03,0x00,0x10,
-  0x80,0x00,0x01,0x09,0x00,0x10,0x88,0x00,0x03,0x00,0x10,0x84,0x00,0x01,0x09,0x00,
-  0x10,0x8c,0x00,0x03,0x00,0x10,0x88,0x00,0x01,0x09,0x00,0x10,0x90,0x00,0x03,0x00,
-  0x10,0x8c,0x00,0x01,0x09,0x00,0x10,0xa0,0x00,0x03,0x00,0x10,0x90,0x00,0x01,0x09,
-  0x00,0x10,0xa4,0x00,0x03,0x00,0x10,0xa0,0x00,0x01,0x09,0x00,0x10,0xa8,0x00,0x03,
-  0x00,0x10,0xa4,0x00,0x01,0x09,0x00,0x10,0xac,0x00,0x03,0x00,0x10,0xa8,0x00,0x01,
-  0x09,0x00,0x10,0xb0,0x00,0x03,0x00,0x10,0xac,0x00,0x01,0x09,0x00,0x10,0xc0,0x00,
-  0x03,0x00,0x10,0xb0,0x00,0x01,0x09,0x00,0x10,0xc4,0x00,0x03,0x00,0x10,0xc0,0x00,
-  0x01,0x09,0x00,0x10,0xc8,0x00,0x03,0x00,0x10,0xc4,0x00,0x01,0x09,0x00,0x10,0xcc,
-  0x00,0x03,0x00,0x10,0xc8,0x00,0x01,0x09,0x00,0x10,0xd0,0x00,0x03,0x00,0x10,0xcc,
-  0x00,0x01,0x09,0x00,0x11,0x00,0xc0,0x13,0x00,0x10,0xd0,0x00,0x01,0x09,0x00,0x11,
-  0x04,0x00,0x13,0x00,0x11,0x00,0xc0,0x11,0x09,0x00,0x11,0x08,0x80,0x23,0x00,0x11,
-  0x04,0x00,0x11,0x09,0x00,0x11,0x0c,0x00,0x03,0x00,0x11,0x08,0x80,0x21,0x09,0x00,
-  0x11,0x10,0x00,0x03,0x00,0x11,0x0c,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x13,0x00,
-  0x11,0x10,0x00,0x01,0x09,0x00,0x11,0x24,0x00,0x03,0x00,0x11,0x20,0x00,0x11,0x09,
-  0x00,0x11,0x28,0x00,0x13,0x00,0x11,0x24,0x00,0x01,0x09,0x00,0x11,0x2c,0x00,0x03,
-  0x00,0x11,0x28,0x00,0x11,0x09,0x00,0x11,0x30,0x00,0x03,0x00,0x11,0x2c,0x00,0x01,
-  0x09,0x00,0x11,0x40,0x08,0x1b,0x00,0x11,0x30,0x00,0x01,0x09,0x00,0x11,0x44,0x20,
-  0x0b,0x00,0x11,0x40,0x08,0x19,0x09,0x00,0x11,0x48,0xc0,0x13,0x00,0x11,0x44,0x20,
-  0x09,0x09,0x00,0x11,0x4c,0x00,0x03,0x00,0x11,0x48,0xc0,0x11,0x09,0x00,0x11,0x50,
-  0x00,0x03,0x00,0x11,0x4c,0x00,0x01,0x09,0x00,0x11,0x80,0x00,0x03,0x00,0x11,0x50,
-  0x00,0x01,0x09,0x00,0x11,0x84,0x00,0x23,0x00,0x11,0x80,0x00,0x01,0x09,0x00,0x11,
-  0x88,0x40,0x13,0x00,0x11,0x84,0x00,0x21,0x09,0x00,0x11,0x8c,0x00,0x03,0x00,0x11,
-  0x88,0x40,0x11,0x09,0x00,0x11,0x90,0x80,0x03,0x00,0x11,0x8c,0x00,0x01,0x09,0x00,
-  0x11,0xa0,0x00,0x03,0x00,0x11,0x90,0x80,0x01,0x09,0x00,0x11,0xa4,0x00,0x03,0x00,
-  0x11,0xa0,0x00,0x01,0x09,0x00,0x11,0xa8,0x00,0x03,0x00,0x11,0xa4,0x00,0x01,0x09,
-  0x00,0x11,0xac,0x00,0x03,0x00,0x11,0xa8,0x00,0x01,0x09,0x00,0x11,0xb0,0x00,0x13,
-  0x00,0x11,0xac,0x00,0x01,0x09,0x00,0x11,0xc0,0x20,0x03,0x00,0x11,0xb0,0x00,0x11,
-  0x09,0x00,0x11,0xc4,0xc0,0x03,0x00,0x11,0xc0,0x20,0x01,0x09,0x00,0x11,0xc8,0x08,
-  0x0b,0x00,0x11,0xc4,0xc0,0x01,0x09,0x00,0x11,0xcc,0x00,0x03,0x00,0x11,0xc8,0x08,
-  0x09,0x09,0x00,0x11,0xd0,0x00,0x13,0x00,0x11,0xcc,0x00,0x01,0x09,0x00,0x12,0x00,
-  0x00,0x03,0x00,0x11,0xd0,0x00,0x11,0x09,0x00,0x12,0x04,0x00,0x03,0x00,0x12,0x00,
-  0x00,0x01,0x09,0x00,0x12,0x08,0x00,0x03,0x00,0x12,0x04,0x00,0x01,0x09,0x00,0x12,
-  0x0c,0x00,0x03,0x00,0x12,0x08,0x00,0x01,0x09,0x00,0x12,0x10,0x00,0x03,0x00,0x12,
-  0x0c,0x00,0x01,0x09,0x00,0x12,0x20,0x00,0x03,0x00,0x12,0x10,0x00,0x01,0x09,0x00,
-  0x12,0x24,0x00,0x03,0x00,0x12,0x20,0x00,0x01,0x09,0x00,0x12,0x28,0x00,0x03,0x00,
-  0x12,0x24,0x00,0x01,0x09,0x00,0x12,0x2c,0x00,0x03,0x00,0x12,0x28,0x00,0x01,0x09,
-  0x00,0x12,0x30,0x00,0x03,0x00,0x12,0x2c,0x00,0x01,0x09,0x00,0x12,0x40,0x00,0x03,
-  0x00,0x12,0x30,0x00,0x01,0x09,0x00,0x12,0x44,0x00,0x03,0x00,0x12,0x40,0x00,0x01,
-  0x09,0x00,0x12,0x48,0x00,0x03,0x00,0x12,0x44,0x00,0x01,0x09,0x00,0x12,0x4c,0x00,
-  0x03,0x00,0x12,0x48,0x00,0x01,0x09,0x00,0x12,0x50,0x00,0x03,0x00,0x12,0x4c,0x00,
-  0x01,0x09,0x00,0x12,0x80,0x00,0x03,0x00,0x12,0x50,0x00,0x01,0x09,0x00,0x12,0x84,
-  0x00,0x03,0x00,0x12,0x80,0x00,0x01,0x09,0x00,0x12,0x88,0x00,0x03,0x00,0x12,0x84,
-  0x00,0x01,0x09,0x00,0x12,0x8c,0x00,0x03,0x00,0x12,0x88,0x00,0x01,0x09,0x00,0x12,
-  0x90,0x00,0x03,0x00,0x12,0x8c,0x00,0x01,0x09,0x00,0x12,0xa0,0x00,0x03,0x00,0x12,
-  0x90,0x00,0x01,0x09,0x00,0x12,0xa4,0x00,0x03,0x00,0x12,0xa0,0x00,0x01,0x09,0x00,
-  0x12,0xa8,0x00,0x03,0x00,0x12,0xa4,0x00,0x01,0x09,0x00,0x12,0xac,0x00,0x03,0x00,
-  0x12,0xa8,0x00,0x01,0x09,0x00,0x12,0xb0,0x00,0x03,0x00,0x12,0xac,0x00,0x01,0x09,
-  0x00,0x12,0xc0,0x00,0x03,0x00,0x12,0xb0,0x00,0x01,0x09,0x00,0x12,0xc4,0x00,0x03,
-  0x00,0x12,0xc0,0x00,0x01,0x09,0x00,0x12,0xc8,0x00,0x03,0x00,0x12,0xc4,0x00,0x01,
-  0x09,0x00,0x12,0xcc,0x00,0x03,0x00,0x12,0xc8,0x00,0x01,0x09,0x00,0x12,0xd0,0x00,
-  0x03,0x00,0x12,0xcc,0x00,0x01,0x09,0x00,0x13,0x00,0x00,0x03,0x00,0x12,0xd0,0x00,
-  0x01,0x09,0x00,0x13,0x04,0x00,0x03,0x00,0x13,0x00,0x00,0x01,0x09,0x00,0x13,0x08,
-  0x00,0x03,0x00,0x13,0x04,0x00,0x01,0x09,0x00,0x13,0x0c,0x00,0x03,0x00,0x13,0x08,
-  0x00,0x01,0x09,0x00,0x13,0x10,0x00,0x03,0x00,0x13,0x0c,0x00,0x01,0x09,0x00,0x13,
-  0x20,0x00,0x03,0x00,0x13,0x10,0x00,0x01,0x09,0x00,0x13,0x24,0x00,0x03,0x00,0x13,
-  0x20,0x00,0x01,0x09,0x00,0x13,0x28,0x00,0x03,0x00,0x13,0x24,0x00,0x01,0x09,0x00,
-  0x13,0x2c,0x00,0x03,0x00,0x13,0x28,0x00,0x01,0x09,0x00,0x13,0x30,0x00,0x03,0x00,
-  0x13,0x2c,0x00,0x01,0x09,0x00,0x13,0x40,0x00,0x03,0x00,0x13,0x30,0x00,0x01,0x09,
-  0x00,0x13,0x44,0x00,0x03,0x00,0x13,0x40,0x00,0x01,0x09,0x00,0x13,0x48,0x00,0x03,
-  0x00,0x13,0x44,0x00,0x01,0x09,0x00,0x13,0x4c,0x00,0x03,0x00,0x13,0x48,0x00,0x01,
-  0x09,0x00,0x13,0x50,0x00,0x03,0x00,0x13,0x4c,0x00,0x01,0x09,0x00,0x13,0x80,0x00,
-  0x03,0x00,0x13,0x50,0x00,0x01,0x09,0x00,0x13,0x84,0x00,0x03,0x00,0x13,0x80,0x00,
-  0x01,0x09,0x00,0x13,0x88,0x00,0x03,0x00,0x13,0x84,0x00,0x01,0x09,0x00,0x13,0x8c,
-  0x00,0x03,0x00,0x13,0x88,0x00,0x01,0x09,0x00,0x13,0x90,0x00,0x03,0x00,0x13,0x8c,
-  0x00,0x01,0x09,0x00,0x13,0xa2,0x00,0x03,0x00,0x13,0x90,0x00,0x01,0x09,0x00,0x13,
-  0xa4,0x00,0x03,0x00,0x13,0xa2,0x00,0x01,0x09,0x00,0x13,0xa8,0x00,0x03,0x00,0x13,
-  0xa4,0x00,0x01,0x09,0x00,0x13,0xac,0x00,0x03,0x00,0x13,0xa8,0x00,0x01,0x09,0x00,
-  0x13,0xb0,0x00,0x03,0x00,0x13,0xac,0x00,0x01,0x09,0x00,0x13,0xc0,0x00,0x03,0x00,
-  0x13,0xb0,0x00,0x01,0x09,0x00,0x13,0xc4,0x00,0x03,0x00,0x13,0xc0,0x00,0x01,0x09,
-  0x00,0x13,0xc8,0x00,0x03,0x00,0x13,0xc4,0x00,0x01,0x09,0x00,0x13,0xcc,0x00,0x03,
-  0x00,0x13,0xc8,0x00,0x01,0x09,0x00,0x13,0xd0,0x00,0x03,0x00,0x13,0xcc,0x00,0x01,
-  0x09,0x00,0x14,0x00,0x00,0x03,0x00,0x13,0xd0,0x00,0x01,0x09,0x00,0x14,0x04,0x00,
-  0x03,0x00,0x14,0x00,0x00,0x01,0x09,0x00,0x14,0x08,0x00,0x03,0x00,0x14,0x04,0x00,
-  0x01,0x09,0x00,0x14,0x0e,0x00,0x03,0x00,0x14,0x08,0x00,0x01,0x09,0x00,0x14,0x10,
-  0x00,0x03,0x00,0x14,0x0e,0x00,0x01,0x09,0x00,0x14,0x23,0x00,0x03,0x00,0x14,0x10,
-  0x00,0x01,0x09,0x00,0x14,0x24,0x00,0x03,0x00,0x14,0x23,0x00,0x01,0x09,0x00,0x14,
-  0x28,0x00,0x03,0x00,0x14,0x24,0x00,0x01,0x09,0x00,0x14,0x2e,0x00,0x03,0x00,0x14,
-  0x28,0x00,0x01,0x09,0x00,0x14,0x30,0x00,0x03,0x00,0x14,0x2e,0x00,0x01,0x09,0x00,
-  0x14,0x40,0x00,0x03,0x00,0x14,0x30,0x00,0x01,0x09,0x00,0x14,0x44,0x00,0x03,0x00,
-  0x14,0x40,0x00,0x01,0x09,0x00,0x14,0x48,0x00,0x03,0x00,0x14,0x44,0x00,0x01,0x09,
-  0x00,0x14,0x4c,0x00,0x03,0x00,0x14,0x48,0x00,0x01,0x09,0x00,0x14,0x50,0x00,0x03,
-  0x00,0x14,0x4c,0x00,0x01,0x09,0x00,0x14,0x80,0x00,0x03,0x00,0x14,0x50,0x00,0x01,
-  0x09,0x00,0x14,0x84,0x00,0x03,0x00,0x14,0x80,0x00,0x01,0x09,0x00,0x14,0x88,0x00,
-  0x03,0x00,0x14,0x84,0x00,0x01,0x09,0x00,0x14,0x8c,0x00,0x03,0x00,0x14,0x88,0x00,
-  0x01,0x09,0x00,0x14,0x90,0x00,0x03,0x00,0x14,0x8c,0x00,0x01,0x09,0x00,0x14,0xa0,
-  0x00,0x03,0x00,0x14,0x90,0x00,0x01,0x09,0x00,0x14,0xa4,0x00,0x03,0x00,0x14,0xa0,
-  0x00,0x01,0x09,0x00,0x14,0xa8,0x00,0x03,0x00,0x14,0xa4,0x00,0x01,0x09,0x00,0x14,
-  0xac,0x00,0x03,0x00,0x14,0xa8,0x00,0x01,0x09,0x00,0x14,0xb0,0x00,0x03,0x00,0x14,
-  0xac,0x00,0x01,0x09,0x00,0x14,0xc0,0x00,0x03,0x00,0x14,0xb0,0x00,0x01,0x09,0x00,
-  0x14,0xc4,0x00,0x03,0x00,0x14,0xc0,0x00,0x01,0x09,0x00,0x14,0xc8,0x00,0x03,0x00,
-  0x14,0xc4,0x00,0x01,0x09,0x00,0x14,0xcc,0x00,0x03,0x00,0x14,0xc8,0x00,0x01,0x09,
-  0x00,0x14,0xd0,0x00,0x03,0x00,0x14,0xcc,0x00,0x01,0x09,0x00,0x15,0x00,0x00,0x03,
-  0x00,0x14,0xd0,0x00,0x01,0x09,0x00,0x15,0x04,0x00,0x13,0x00,0x15,0x00,0x00,0x01,
-  0x09,0x00,0x15,0x08,0xc0,0x33,0x00,0x15,0x04,0x00,0x11,0x09,0x00,0x15,0x0c,0x80,
-  0x03,0x00,0x15,0x08,0xc0,0x31,0x09,0x00,0x15,0x10,0x80,0x03,0x00,0x15,0x0c,0x80,
-  0x01,0x09,0x00,0x15,0x20,0x04,0x03,0x00,0x15,0x10,0x80,0x01,0x09,0x00,0x15,0x24,
-  0x00,0x03,0x00,0x15,0x20,0x04,0x01,0x09,0x00,0x15,0x28,0x00,0x13,0x00,0x15,0x24,
-  0x00,0x01,0x09,0x00,0x15,0x2c,0x00,0x13,0x00,0x15,0x28,0x00,0x11,0x09,0x00,0x15,
-  0x30,0x00,0x13,0x00,0x15,0x2c,0x00,0x11,0x09,0x00,0x15,0x40,0x28,0x03,0x00,0x15,
-  0x30,0x00,0x11,0x09,0x00,0x15,0x44,0x28,0x0b,0x00,0x15,0x40,0x28,0x01,0x09,0x00,
-  0x15,0x48,0x48,0x1b,0x00,0x15,0x44,0x28,0x09,0x09,0x00,0x15,0x4c,0x00,0x13,0x00,
-  0x15,0x48,0x48,0x19,0x09,0x00,0x15,0x50,0x00,0x13,0x00,0x15,0x4c,0x00,0x11,0x09,
-  0x00,0x15,0x80,0xc0,0x33,0x00,0x15,0x50,0x00,0x11,0x09,0x00,0x15,0x84,0xc0,0x23,
-  0x00,0x15,0x80,0xc0,0x31,0x09,0x00,0x15,0x88,0x00,0x03,0x00,0x15,0x84,0xc0,0x21,
-  0x09,0x00,0x15,0x8c,0x00,0x03,0x00,0x15,0x88,0x00,0x01,0x09,0x00,0x15,0x90,0x00,
-  0x03,0x00,0x15,0x8c,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x13,0x00,0x15,0x90,0x00,
-  0x01,0x09,0x00,0x15,0xa4,0x00,0x13,0x00,0x15,0xa0,0x00,0x11,0x09,0x00,0x15,0xa8,
-  0x00,0x03,0x00,0x15,0xa4,0x00,0x11,0x09,0x00,0x15,0xac,0x00,0x03,0x00,0x15,0xa8,
-  0x00,0x01,0x09,0x00,0x15,0xb0,0x00,0x03,0x00,0x15,0xac,0x00,0x01,0x09,0x00,0x15,
-  0xc0,0xc0,0x1b,0x00,0x15,0xb0,0x00,0x01,0x09,0x00,0x15,0xc4,0x40,0x13,0x00,0x15,
-  0xc0,0xc0,0x19,0x09,0x00,0x15,0xc8,0x00,0x03,0x00,0x15,0xc4,0x40,0x11,0x09,0x00,
-  0x15,0xcc,0x80,0x03,0x00,0x15,0xc8,0x00,0x01,0x09,0x00,0x15,0xd0,0x00,0x03,0x00,
-  0x15,0xcc,0x80,0x01,0x09,0x00,0x16,0x02,0x02,0x03,0x00,0x15,0xd0,0x00,0x01,0x09,
-  0x00,0x16,0x06,0x3a,0x03,0x00,0x16,0x02,0x02,0x01,0x09,0x00,0x16,0x0b,0x42,0x03,
-  0x00,0x16,0x06,0x3a,0x01,0x09,0x00,0x16,0x0d,0x02,0x03,0x00,0x16,0x0b,0x42,0x01,
-  0x09,0x00,0x16,0x13,0x02,0x03,0x00,0x16,0x0d,0x02,0x01,0x09,0x00,0x16,0x20,0x03,
-  0x03,0x00,0x16,0x13,0x02,0x01,0x09,0x00,0x16,0x27,0x3b,0x03,0x00,0x16,0x20,0x03,
-  0x01,0x09,0x00,0x16,0x2b,0x03,0x03,0x00,0x16,0x27,0x3b,0x01,0x09,0x00,0x16,0x2d,
-  0x01,0x03,0x00,0x16,0x2b,0x03,0x01,0x09,0x00,0x16,0x30,0x00,0x03,0x00,0x16,0x2d,
-  0x01,0x01,0x09,0x00,0x16,0x40,0x00,0x0b,0x00,0x16,0x30,0x00,0x01,0x09,0x00,0x16,
-  0x44,0x14,0x0b,0x00,0x16,0x40,0x00,0x09,0x09,0x00,0x16,0x48,0x00,0x0b,0x00,0x16,
-  0x44,0x14,0x09,0x09,0x00,0x16,0x4c,0x00,0x03,0x00,0x16,0x48,0x00,0x09,0x09,0x00,
-  0x16,0x50,0x00,0x03,0x00,0x16,0x4c,0x00,0x01,0x09,0x00,0x16,0x83,0x02,0x13,0x00,
-  0x16,0x50,0x00,0x01,0x09,0x00,0x16,0x87,0x02,0x13,0x00,0x16,0x83,0x02,0x11,0x09,
-  0x00,0x16,0x8b,0x02,0x13,0x00,0x16,0x87,0x02,0x11,0x09,0x00,0x16,0x8f,0x02,0x03,
-  0x00,0x16,0x8b,0x02,0x11,0x09,0x00,0x16,0x93,0x02,0x03,0x00,0x16,0x8f,0x02,0x01,
-  0x09,0x00,0x16,0xa3,0x03,0x03,0x00,0x16,0x93,0x02,0x01,0x09,0x00,0x16,0xa7,0x07,
-  0x03,0x00,0x16,0xa3,0x03,0x01,0x09,0x00,0x16,0xab,0x03,0x03,0x00,0x16,0xa7,0x07,
-  0x01,0x09,0x00,0x16,0xaf,0x01,0x03,0x00,0x16,0xab,0x03,0x01,0x09,0x00,0x16,0xb0,
-  0x00,0x03,0x00,0x16,0xaf,0x01,0x01,0x09,0x00,0x16,0xc0,0x00,0x03,0x00,0x16,0xb0,
-  0x00,0x01,0x09,0x00,0x16,0xc4,0x00,0x03,0x00,0x16,0xc0,0x00,0x01,0x09,0x00,0x16,
-  0xc8,0x08,0x03,0x00,0x16,0xc4,0x00,0x01,0x09,0x00,0x16,0xcc,0x00,0x03,0x00,0x16,
-  0xc8,0x08,0x01,0x09,0x00,0x16,0xd0,0x00,0x03,0x00,0x16,0xcc,0x00,0x01,0x09,0x00,
-  0x17,0x02,0x02,0x03,0x00,0x16,0xd0,0x00,0x01,0x09,0x00,0x17,0x07,0x02,0x03,0x00,
-  0x17,0x02,0x02,0x01,0x09,0x00,0x17,0x0b,0x02,0x03,0x00,0x17,0x07,0x02,0x01,0x09,
-  0x00,0x17,0x0f,0x02,0x03,0x00,0x17,0x0b,0x02,0x01,0x09,0x00,0x17,0x11,0x02,0x03,
-  0x00,0x17,0x0f,0x02,0x01,0x09,0x00,0x17,0x23,0x03,0x03,0x00,0x17,0x11,0x02,0x01,
-  0x09,0x00,0x17,0x27,0x03,0x03,0x00,0x17,0x23,0x03,0x01,0x09,0x00,0x17,0x2b,0x03,
-  0x03,0x00,0x17,0x27,0x03,0x01,0x09,0x00,0x17,0x2f,0x01,0x03,0x00,0x17,0x2b,0x03,
-  0x01,0x09,0x00,0x17,0x30,0x00,0x03,0x00,0x17,0x2f,0x01,0x01,0x09,0x00,0x17,0x40,
-  0x00,0x03,0x00,0x17,0x30,0x00,0x01,0x09,0x00,0x17,0x44,0x00,0x03,0x00,0x17,0x40,
-  0x00,0x01,0x09,0x00,0x17,0x48,0x00,0x03,0x00,0x17,0x44,0x00,0x01,0x09,0x00,0x17,
-  0x4c,0x00,0x03,0x00,0x17,0x48,0x00,0x01,0x09,0x00,0x17,0x50,0x00,0x03,0x00,0x17,
-  0x4c,0x00,0x01,0x09,0x00,0x17,0x80,0x0a,0x03,0x00,0x17,0x50,0x00,0x01,0x09,0x00,
-  0x17,0x84,0x00,0x03,0x00,0x17,0x80,0x0a,0x01,0x09,0x00,0x17,0x88,0x00,0x03,0x00,
-  0x17,0x84,0x00,0x01,0x09,0x00,0x17,0x8e,0x00,0x03,0x00,0x17,0x88,0x00,0x01,0x09,
-  0x00,0x17,0x90,0x00,0x03,0x00,0x17,0x8e,0x00,0x01,0x09,0x00,0x17,0xa3,0x01,0x03,
-  0x00,0x17,0x90,0x00,0x01,0x09,0x00,0x17,0xa6,0x01,0x03,0x00,0x17,0xa3,0x01,0x01,
-  0x09,0x00,0x17,0xa8,0x01,0x03,0x00,0x17,0xa6,0x01,0x01,0x09,0x00,0x17,0xae,0x01,
-  0x03,0x00,0x17,0xa8,0x01,0x01,0x09,0x00,0x17,0xb0,0x00,0x03,0x00,0x17,0xae,0x01,
-  0x01,0x09,0x00,0x17,0xc0,0x00,0x03,0x00,0x17,0xb0,0x00,0x01,0x09,0x00,0x17,0xc4,
-  0x00,0x03,0x00,0x17,0xc0,0x00,0x01,0x09,0x00,0x17,0xc8,0x00,0x03,0x00,0x17,0xc4,
-  0x00,0x01,0x09,0x00,0x17,0xcc,0x00,0x03,0x00,0x17,0xc8,0x00,0x01,0x09,0x00,0x17,
-  0xd0,0x00,0x03,0x00,0x17,0xcc,0x00,0x01,0x09,0x00,0x18,0x00,0x00,0x03,0x00,0x17,
-  0xd0,0x00,0x01,0x09,0x00,0x18,0x04,0x00,0x03,0x00,0x18,0x00,0x00,0x01,0x09,0x00,
-  0x18,0x08,0x00,0x03,0x00,0x18,0x04,0x00,0x01,0x09,0x00,0x18,0x0c,0x00,0x03,0x00,
-  0x18,0x08,0x00,0x01,0x09,0x00,0x18,0x10,0x00,0x03,0x00,0x18,0x0c,0x00,0x01,0x09,
-  0x00,0x18,0x20,0x00,0x03,0x00,0x18,0x10,0x00,0x01,0x09,0x00,0x18,0x26,0x00,0x03,
-  0x00,0x18,0x20,0x00,0x01,0x09,0x00,0x18,0x28,0x01,0x03,0x00,0x18,0x26,0x00,0x01,
-  0x09,0x00,0x18,0x2e,0x01,0x03,0x00,0x18,0x28,0x01,0x01,0x09,0x00,0x18,0x30,0x00,
-  0x03,0x00,0x18,0x2e,0x01,0x01,0x09,0x00,0x18,0x40,0x00,0x03,0x00,0x18,0x30,0x00,
-  0x01,0x09,0x00,0x18,0x44,0x00,0x03,0x00,0x18,0x40,0x00,0x01,0x09,0x00,0x18,0x48,
-  0x00,0x03,0x00,0x18,0x44,0x00,0x01,0x09,0x00,0x18,0x4c,0x00,0x03,0x00,0x18,0x48,
-  0x00,0x01,0x09,0x00,0x18,0x50,0x00,0x03,0x00,0x18,0x4c,0x00,0x01,0x09,0x00,0x18,
-  0x80,0x00,0x03,0x00,0x18,0x50,0x00,0x01,0x09,0x00,0x18,0x84,0x00,0x03,0x00,0x18,
-  0x80,0x00,0x01,0x09,0x00,0x18,0x88,0x00,0x03,0x00,0x18,0x84,0x00,0x01,0x09,0x00,
-  0x18,0x8c,0x00,0x03,0x00,0x18,0x88,0x00,0x01,0x09,0x00,0x18,0x90,0x00,0x03,0x00,
-  0x18,0x8c,0x00,0x01,0x09,0x00,0x18,0xa0,0x00,0x03,0x00,0x18,0x90,0x00,0x01,0x09,
-  0x00,0x18,0xa6,0x00,0x03,0x00,0x18,0xa0,0x00,0x01,0x09,0x00,0x18,0xa8,0x01,0x03,
-  0x00,0x18,0xa6,0x00,0x01,0x09,0x00,0x18,0xac,0x01,0x03,0x00,0x18,0xa8,0x01,0x01,
-  0x09,0x00,0x18,0xb0,0x00,0x03,0x00,0x18,0xac,0x01,0x01,0x09,0x00,0x18,0xc0,0x00,
-  0x03,0x00,0x18,0xb0,0x00,0x01,0x09,0x00,0x18,0xc4,0x00,0x03,0x00,0x18,0xc0,0x00,
-  0x01,0x09,0x00,0x18,0xc8,0x00,0x03,0x00,0x18,0xc4,0x00,0x01,0x09,0x00,0x18,0xcc,
-  0x00,0x03,0x00,0x18,0xc8,0x00,0x01,0x09,0x00,0x18,0xd0,0x00,0x03,0x00,0x18,0xcc,
-  0x00,0x01,0x09,0x00,0x19,0x01,0x00,0x03,0x00,0x18,0xd0,0x00,0x01,0x09,0x00,0x19,
-  0x04,0x00,0x03,0x00,0x19,0x01,0x00,0x01,0x09,0x00,0x19,0x08,0x00,0x03,0x00,0x19,
-  0x04,0x00,0x01,0x09,0x00,0x19,0x0c,0x00,0x03,0x00,0x19,0x08,0x00,0x01,0x09,0x00,
-  0x19,0x11,0x00,0x03,0x00,0x19,0x0c,0x00,0x01,0x09,0x00,0x19,0x20,0x00,0x03,0x00,
-  0x19,0x11,0x00,0x01,0x09,0x00,0x19,0x24,0x00,0x03,0x00,0x19,0x20,0x00,0x01,0x09,
-  0x00,0x19,0x28,0x00,0x03,0x00,0x19,0x24,0x00,0x01,0x09,0x00,0x19,0x2c,0x00,0x03,
-  0x00,0x19,0x28,0x00,0x01,0x09,0x00,0x19,0x30,0x00,0x03,0x00,0x19,0x2c,0x00,0x01,
-  0x09,0x00,0x19,0x40,0x00,0x03,0x00,0x19,0x30,0x00,0x01,0x09,0x00,0x19,0x44,0x00,
-  0x03,0x00,0x19,0x40,0x00,0x01,0x09,0x00,0x19,0x48,0x00,0x03,0x00,0x19,0x44,0x00,
-  0x01,0x09,0x00,0x19,0x4c,0x00,0x03,0x00,0x19,0x48,0x00,0x01,0x09,0x00,0x19,0x50,
-  0x00,0x03,0x00,0x19,0x4c,0x00,0x01,0x09,0x00,0x19,0x80,0x01,0x03,0x00,0x19,0x50,
-  0x00,0x01,0x09,0x00,0x19,0x85,0x00,0x03,0x00,0x19,0x80,0x01,0x01,0x09,0x00,0x19,
-  0x88,0x00,0x03,0x00,0x19,0x85,0x00,0x01,0x09,0x00,0x19,0x8c,0x00,0x03,0x00,0x19,
-  0x88,0x00,0x01,0x09,0x00,0x19,0x90,0x00,0x03,0x00,0x19,0x8c,0x00,0x01,0x09,0x00,
-  0x19,0xa0,0x00,0x03,0x00,0x19,0x90,0x00,0x01,0x09,0x00,0x19,0xa4,0x00,0x03,0x00,
-  0x19,0xa0,0x00,0x01,0x09,0x00,0x19,0xa8,0x00,0x03,0x00,0x19,0xa4,0x00,0x01,0x09,
-  0x00,0x19,0xac,0x00,0x03,0x00,0x19,0xa8,0x00,0x01,0x09,0x00,0x19,0xb0,0x00,0x03,
-  0x00,0x19,0xac,0x00,0x01,0x09,0x00,0x19,0xc0,0x00,0x03,0x00,0x19,0xb0,0x00,0x01,
-  0x09,0x00,0x19,0xc4,0x00,0x03,0x00,0x19,0xc0,0x00,0x01,0x09,0x00,0x19,0xc8,0x00,
-  0x03,0x00,0x19,0xc4,0x00,0x01,0x09,0x00,0x19,0xcc,0x00,0x03,0x00,0x19,0xc8,0x00,
-  0x01,0x09,0x00,0x19,0xd0,0x00,0x03,0x00,0x19,0xcc,0x00,0x01,0x09,0x00,0x1a,0x00,
-  0x01,0x03,0x00,0x19,0xd0,0x00,0x01,0x09,0x00,0x1a,0x04,0x00,0x03,0x00,0x1a,0x00,
-  0x01,0x01,0x09,0x00,0x1a,0x08,0x00,0x03,0x00,0x1a,0x04,0x00,0x01,0x09,0x00,0x1a,
-  0x0c,0x00,0x03,0x00,0x1a,0x08,0x00,0x01,0x09,0x00,0x1a,0x10,0x00,0x03,0x00,0x1a,
-  0x0c,0x00,0x01,0x09,0x00,0x1a,0x20,0x00,0x13,0x00,0x1a,0x10,0x00,0x01,0x09,0x00,
-  0x1a,0x24,0x00,0x13,0x00,0x1a,0x20,0x00,0x11,0x09,0x00,0x1a,0x28,0x00,0x13,0x00,
-  0x1a,0x24,0x00,0x11,0x09,0x00,0x1a,0x2c,0x00,0x13,0x00,0x1a,0x28,0x00,0x11,0x09,
-  0x00,0x1a,0x30,0x00,0x13,0x00,0x1a,0x2c,0x00,0x11,0x09,0x00,0x1a,0x40,0x00,0x13,
-  0x00,0x1a,0x30,0x00,0x11,0x09,0x00,0x1a,0x44,0x00,0x13,0x00,0x1a,0x40,0x00,0x11,
-  0x09,0x00,0x1a,0x48,0x00,0x13,0x00,0x1a,0x44,0x00,0x11,0x09,0x00,0x1a,0x4c,0x00,
-  0x13,0x00,0x1a,0x48,0x00,0x11,0x09,0x00,0x1a,0x50,0x00,0x13,0x00,0x1a,0x4c,0x00,
-  0x11,0x09,0x00,0x1a,0x82,0x81,0x03,0x00,0x1a,0x50,0x00,0x11,0x09,0x00,0x1a,0x84,
-  0x80,0x03,0x00,0x1a,0x82,0x81,0x01,0x09,0x00,0x1a,0x88,0x80,0x03,0x00,0x1a,0x84,
-  0x80,0x01,0x09,0x00,0x1a,0x8c,0x80,0x03,0x00,0x1a,0x88,0x80,0x01,0x09,0x00,0x1a,
-  0x90,0x80,0x03,0x00,0x1a,0x8c,0x80,0x01,0x09,0x00,0x1a,0xa0,0x00,0x03,0x00,0x1a,
-  0x90,0x80,0x01,0x09,0x00,0x1a,0xa4,0x00,0x03,0x00,0x1a,0xa0,0x00,0x01,0x09,0x00,
-  0x1a,0xa8,0x00,0x03,0x00,0x1a,0xa4,0x00,0x01,0x09,0x00,0x1a,0xac,0x00,0x03,0x00,
-  0x1a,0xa8,0x00,0x01,0x09,0x00,0x1a,0xb0,0x00,0x03,0x00,0x1a,0xac,0x00,0x01,0x09,
-  0x00,0x1a,0xc0,0x00,0x03,0x00,0x1a,0xb0,0x00,0x01,0x09,0x00,0x1a,0xc4,0x00,0x03,
-  0x00,0x1a,0xc0,0x00,0x01,0x09,0x00,0x1a,0xc8,0x00,0x03,0x00,0x1a,0xc4,0x00,0x01,
-  0x09,0x00,0x1a,0xcc,0x00,0x03,0x00,0x1a,0xc8,0x00,0x01,0x09,0x00,0x1a,0xd0,0x00,
-  0x03,0x00,0x1a,0xcc,0x00,0x01,0x09,0x00,0x1b,0x00,0x01,0x03,0x00,0x1a,0xd0,0x00,
-  0x01,0x09,0x00,0x1b,0x04,0x00,0x03,0x00,0x1b,0x00,0x01,0x01,0x09,0x00,0x1b,0x08,
-  0x00,0x03,0x00,0x1b,0x04,0x00,0x01,0x09,0x00,0x1b,0x0c,0x00,0x03,0x00,0x1b,0x08,
-  0x00,0x01,0x09,0x00,0x1b,0x10,0x00,0x03,0x00,0x1b,0x0c,0x00,0x01,0x09,0x00,0x1b,
-  0x20,0x00,0x03,0x00,0x1b,0x10,0x00,0x01,0x09,0x00,0x1b,0x24,0x00,0x03,0x00,0x1b,
-  0x20,0x00,0x01,0x09,0x00,0x1b,0x28,0x00,0x03,0x00,0x1b,0x24,0x00,0x01,0x09,0x00,
-  0x1b,0x2c,0x00,0x03,0x00,0x1b,0x28,0x00,0x01,0x09,0x00,0x1b,0x30,0x00,0x03,0x00,
-  0x1b,0x2c,0x00,0x01,0x09,0x00,0x1b,0x40,0x00,0x03,0x00,0x1b,0x30,0x00,0x01,0x09,
-  0x00,0x1b,0x44,0x00,0x03,0x00,0x1b,0x40,0x00,0x01,0x09,0x00,0x1b,0x48,0x00,0x03,
-  0x00,0x1b,0x44,0x00,0x01,0x09,0x00,0x1b,0x4c,0x00,0x03,0x00,0x1b,0x48,0x00,0x01,
-  0x09,0x00,0x1b,0x50,0x00,0x03,0x00,0x1b,0x4c,0x00,0x01,0x09,0x00,0x1b,0x81,0x01,
-  0x03,0x00,0x1b,0x50,0x00,0x01,0x09,0x00,0x1b,0x84,0x00,0x03,0x00,0x1b,0x81,0x01,
-  0x01,0x09,0x00,0x1b,0x88,0x00,0x03,0x00,0x1b,0x84,0x00,0x01,0x09,0x00,0x1b,0x8c,
-  0x00,0x03,0x00,0x1b,0x88,0x00,0x01,0x09,0x00,0x1b,0x91,0x01,0x03,0x00,0x1b,0x8c,
-  0x00,0x01,0x09,0x00,0x1b,0xa0,0x00,0x03,0x00,0x1b,0x91,0x01,0x01,0x09,0x00,0x1b,
-  0xa4,0x00,0x03,0x00,0x1b,0xa0,0x00,0x01,0x09,0x00,0x1b,0xa8,0x00,0x03,0x00,0x1b,
-  0xa4,0x00,0x01,0x09,0x00,0x1b,0xac,0x00,0x03,0x00,0x1b,0xa8,0x00,0x01,0x09,0x00,
-  0x1b,0xb0,0x00,0x03,0x00,0x1b,0xac,0x00,0x01,0x09,0x00,0x1b,0xc0,0x00,0x03,0x00,
-  0x1b,0xb0,0x00,0x01,0x09,0x00,0x1b,0xc4,0x00,0x03,0x00,0x1b,0xc0,0x00,0x01,0x09,
-  0x00,0x1b,0xc8,0x00,0x03,0x00,0x1b,0xc4,0x00,0x01,0x09,0x00,0x1b,0xcc,0x00,0x03,
-  0x00,0x1b,0xc8,0x00,0x01,0x09,0x00,0x1b,0xd0,0x00,0x03,0x00,0x1b,0xcc,0x00,0x01,
-  0x09,0x00,0x1c,0x00,0x00,0x03,0x00,0x1b,0xd0,0x00,0x01,0x09,0x00,0x1c,0x07,0x00,
-  0x03,0x00,0x1c,0x00,0x00,0x01,0x09,0x00,0x1c,0x08,0x00,0x03,0x00,0x1c,0x07,0x00,
-  0x01,0x09,0x00,0x1c,0x0c,0x00,0x03,0x00,0x1c,0x08,0x00,0x01,0x09,0x00,0x1c,0x10,
-  0x00,0x03,0x00,0x1c,0x0c,0x00,0x01,0x09,0x00,0x1c,0x20,0x00,0x03,0x00,0x1c,0x10,
-  0x00,0x01,0x09,0x00,0x1c,0x24,0x00,0x03,0x00,0x1c,0x20,0x00,0x01,0x09,0x00,0x1c,
-  0x28,0x00,0x03,0x00,0x1c,0x24,0x00,0x01,0x09,0x00,0x1c,0x2c,0x00,0x03,0x00,0x1c,
-  0x28,0x00,0x01,0x09,0x00,0x1c,0x30,0x00,0x03,0x00,0x1c,0x2c,0x00,0x01,0x09,0x00,
-  0x1c,0x40,0x00,0x03,0x00,0x1c,0x30,0x00,0x01,0x09,0x00,0x1c,0x44,0x00,0x03,0x00,
-  0x1c,0x40,0x00,0x01,0x09,0x00,0x1c,0x48,0x00,0x03,0x00,0x1c,0x44,0x00,0x01,0x09,
-  0x00,0x1c,0x4c,0x00,0x03,0x00,0x1c,0x48,0x00,0x01,0x09,0x00,0x1c,0x50,0x00,0x03,
-  0x00,0x1c,0x4c,0x00,0x01,0x09,0x00,0x1c,0x80,0x00,0x03,0x00,0x1c,0x50,0x00,0x01,
-  0x09,0x00,0x1c,0x85,0x00,0x03,0x00,0x1c,0x80,0x00,0x01,0x09,0x00,0x1c,0x88,0x00,
-  0x03,0x00,0x1c,0x85,0x00,0x01,0x09,0x00,0x1c,0x8c,0x00,0x03,0x00,0x1c,0x88,0x00,
-  0x01,0x09,0x00,0x1c,0x90,0x00,0x03,0x00,0x1c,0x8c,0x00,0x01,0x09,0x00,0x1c,0xa0,
-  0x00,0x03,0x00,0x1c,0x90,0x00,0x01,0x09,0x00,0x1c,0xa4,0x00,0x03,0x00,0x1c,0xa0,
-  0x00,0x01,0x09,0x00,0x1c,0xa8,0x00,0x03,0x00,0x1c,0xa4,0x00,0x01,0x09,0x00,0x1c,
-  0xac,0x00,0x03,0x00,0x1c,0xa8,0x00,0x01,0x09,0x00,0x1c,0xb0,0x00,0x03,0x00,0x1c,
-  0xac,0x00,0x01,0x09,0x00,0x1c,0xc0,0x00,0x03,0x00,0x1c,0xb0,0x00,0x01,0x09,0x00,
-  0x1c,0xc4,0x00,0x03,0x00,0x1c,0xc0,0x00,0x01,0x09,0x00,0x1c,0xc8,0x00,0x03,0x00,
-  0x1c,0xc4,0x00,0x01,0x09,0x00,0x1c,0xcc,0x00,0x03,0x00,0x1c,0xc8,0x00,0x01,0x09,
-  0x00,0x1c,0xd0,0x00,0x03,0x00,0x1c,0xcc,0x00,0x01,0x09,0x00,0x1d,0x01,0x00,0x03,
-  0x00,0x1c,0xd0,0x00,0x01,0x09,0x00,0x1d,0x04,0x00,0x03,0x00,0x1d,0x01,0x00,0x01,
-  0x09,0x00,0x1d,0x08,0x00,0x03,0x00,0x1d,0x04,0x00,0x01,0x09,0x00,0x1d,0x0c,0x00,
-  0x03,0x00,0x1d,0x08,0x00,0x01,0x09,0x00,0x1d,0x10,0x00,0x03,0x00,0x1d,0x0c,0x00,
-  0x01,0x09,0x00,0x1d,0x20,0x00,0x03,0x00,0x1d,0x10,0x00,0x01,0x09,0x00,0x1d,0x24,
-  0x00,0x03,0x00,0x1d,0x20,0x00,0x01,0x09,0x00,0x1d,0x28,0x00,0x03,0x00,0x1d,0x24,
-  0x00,0x01,0x09,0x00,0x1d,0x2c,0x00,0x03,0x00,0x1d,0x28,0x00,0x01,0x09,0x00,0x1d,
-  0x30,0x00,0x03,0x00,0x1d,0x2c,0x00,0x01,0x09,0x00,0x1d,0x40,0x00,0x03,0x00,0x1d,
-  0x30,0x00,0x01,0x09,0x00,0x1d,0x44,0x00,0x03,0x00,0x1d,0x40,0x00,0x01,0x09,0x00,
-  0x1d,0x48,0x00,0x03,0x00,0x1d,0x44,0x00,0x01,0x09,0x00,0x1d,0x4c,0x00,0x03,0x00,
-  0x1d,0x48,0x00,0x01,0x09,0x00,0x1d,0x50,0x00,0x03,0x00,0x1d,0x4c,0x00,0x01,0x09,
-  0x00,0x1d,0x80,0x00,0x03,0x00,0x1d,0x50,0x00,0x01,0x09,0x00,0x1d,0x87,0x00,0x03,
-  0x00,0x1d,0x80,0x00,0x01,0x09,0x00,0x1d,0x88,0x00,0x03,0x00,0x1d,0x87,0x00,0x01,
-  0x09,0x00,0x1d,0x8c,0x00,0x03,0x00,0x1d,0x88,0x00,0x01,0x09,0x00,0x1d,0x90,0x00,
-  0x03,0x00,0x1d,0x8c,0x00,0x01,0x09,0x00,0x1d,0xa0,0x00,0x03,0x00,0x1d,0x90,0x00,
-  0x01,0x09,0x00,0x1d,0xa4,0x00,0x03,0x00,0x1d,0xa0,0x00,0x01,0x09,0x00,0x1d,0xa8,
-  0x00,0x03,0x00,0x1d,0xa4,0x00,0x01,0x09,0x00,0x1d,0xac,0x00,0x03,0x00,0x1d,0xa8,
-  0x00,0x01,0x09,0x00,0x1d,0xb0,0x00,0x03,0x00,0x1d,0xac,0x00,0x01,0x09,0x00,0x1d,
-  0xc0,0x00,0x03,0x00,0x1d,0xb0,0x00,0x01,0x09,0x00,0x1d,0xc4,0x00,0x03,0x00,0x1d,
-  0xc0,0x00,0x01,0x09,0x00,0x1d,0xc8,0x00,0x03,0x00,0x1d,0xc4,0x00,0x01,0x09,0x00,
-  0x1d,0xcc,0x00,0x03,0x00,0x1d,0xc8,0x00,0x01,0x09,0x00,0x1d,0xd0,0x00,0x03,0x00,
-  0x1d,0xcc,0x00,0x01,0x09,0x00,0x1e,0x00,0x01,0x03,0x00,0x1d,0xd0,0x00,0x01,0x09,
-  0x00,0x1e,0x04,0x00,0x03,0x00,0x1e,0x00,0x01,0x01,0x09,0x00,0x1e,0x08,0x00,0x03,
-  0x00,0x1e,0x04,0x00,0x01,0x09,0x00,0x1e,0x0c,0x00,0x03,0x00,0x1e,0x08,0x00,0x01,
-  0x09,0x00,0x1e,0x10,0x00,0x03,0x00,0x1e,0x0c,0x00,0x01,0x09,0x00,0x1e,0x20,0x00,
-  0x03,0x00,0x1e,0x10,0x00,0x01,0x09,0x00,0x1e,0x24,0x00,0x03,0x00,0x1e,0x20,0x00,
-  0x01,0x09,0x00,0x1e,0x28,0x00,0x03,0x00,0x1e,0x24,0x00,0x01,0x09,0x00,0x1e,0x2c,
-  0x00,0x03,0x00,0x1e,0x28,0x00,0x01,0x09,0x00,0x1e,0x30,0x00,0x03,0x00,0x1e,0x2c,
-  0x00,0x01,0x09,0x00,0x1e,0x40,0x00,0x03,0x00,0x1e,0x30,0x00,0x01,0x09,0x00,0x1e,
-  0x44,0x00,0x03,0x00,0x1e,0x40,0x00,0x01,0x09,0x00,0x1e,0x48,0x00,0x03,0x00,0x1e,
-  0x44,0x00,0x01,0x09,0x00,0x1e,0x4c,0x00,0x03,0x00,0x1e,0x48,0x00,0x01,0x09,0x00,
-  0x1e,0x50,0x00,0x03,0x00,0x1e,0x4c,0x00,0x01,0x09,0x00,0x1e,0x80,0x00,0x03,0x00,
-  0x1e,0x50,0x00,0x01,0x09,0x00,0x1e,0x85,0x00,0x03,0x00,0x1e,0x80,0x00,0x01,0x09,
-  0x00,0x1e,0x88,0x00,0x03,0x00,0x1e,0x85,0x00,0x01,0x09,0x00,0x1e,0x8c,0x00,0x03,
-  0x00,0x1e,0x88,0x00,0x01,0x09,0x00,0x1e,0x90,0x00,0x03,0x00,0x1e,0x8c,0x00,0x01,
-  0x09,0x00,0x1e,0xa0,0x08,0x03,0x00,0x1e,0x90,0x00,0x01,0x09,0x00,0x1e,0xa4,0x00,
-  0x03,0x00,0x1e,0xa0,0x08,0x01,0x09,0x00,0x1e,0xa8,0x00,0x03,0x00,0x1e,0xa4,0x00,
-  0x01,0x09,0x00,0x1e,0xac,0x00,0x03,0x00,0x1e,0xa8,0x00,0x01,0x09,0x00,0x1e,0xb0,
-  0x00,0x03,0x00,0x1e,0xac,0x00,0x01,0x09,0x00,0x1e,0xc0,0x00,0x03,0x00,0x1e,0xb0,
-  0x00,0x01,0x09,0x00,0x1e,0xc4,0x00,0x03,0x00,0x1e,0xc0,0x00,0x01,0x09,0x00,0x1e,
-  0xc8,0x00,0x03,0x00,0x1e,0xc4,0x00,0x01,0x09,0x00,0x1e,0xcc,0x00,0x03,0x00,0x1e,
-  0xc8,0x00,0x01,0x09,0x00,0x1e,0xd0,0x00,0x03,0x00,0x1e,0xcc,0x00,0x01,0x09,0x00,
-  0x1f,0x00,0x01,0x03,0x00,0x1e,0xd0,0x00,0x01,0x09,0x00,0x1f,0x04,0x00,0x03,0x00,
-  0x1f,0x00,0x01,0x01,0x09,0x00,0x1f,0x08,0x00,0x03,0x00,0x1f,0x04,0x00,0x01,0x09,
-  0x00,0x1f,0x0c,0x00,0x03,0x00,0x1f,0x08,0x00,0x01,0x09,0x00,0x1f,0x10,0x00,0x03,
-  0x00,0x1f,0x0c,0x00,0x01,0x09,0x00,0x1f,0x20,0x00,0x03,0x00,0x1f,0x10,0x00,0x01,
-  0x09,0x00,0x1f,0x24,0x00,0x03,0x00,0x1f,0x20,0x00,0x01,0x09,0x00,0x1f,0x28,0x00,
-  0x03,0x00,0x1f,0x24,0x00,0x01,0x09,0x00,0x1f,0x2c,0x00,0x03,0x00,0x1f,0x28,0x00,
-  0x01,0x09,0x00,0x1f,0x30,0x00,0x03,0x00,0x1f,0x2c,0x00,0x01,0x09,0x00,0x1f,0x40,
-  0x00,0x03,0x00,0x1f,0x30,0x00,0x01,0x09,0x00,0x1f,0x44,0x00,0x03,0x00,0x1f,0x40,
-  0x00,0x01,0x09,0x00,0x1f,0x48,0x00,0x03,0x00,0x1f,0x44,0x00,0x01,0x09,0x00,0x1f,
-  0x4c,0x00,0x03,0x00,0x1f,0x48,0x00,0x01,0x09,0x00,0x1f,0x50,0x00,0x03,0x00,0x1f,
-  0x4c,0x00,0x01,0x09,0x00,0x1f,0x83,0x02,0x03,0x00,0x1f,0x50,0x00,0x01,0x09,0x00,
-  0x1f,0x84,0x00,0x03,0x00,0x1f,0x83,0x02,0x01,0x09,0x00,0x1f,0x88,0x00,0x03,0x00,
-  0x1f,0x84,0x00,0x01,0x09,0x00,0x1f,0x8c,0x00,0x03,0x00,0x1f,0x88,0x00,0x01,0x09,
-  0x00,0x1f,0x90,0x00,0x03,0x00,0x1f,0x8c,0x00,0x01,0x09,0x00,0x1f,0xa0,0x00,0x03,
-  0x00,0x1f,0x90,0x00,0x01,0x09,0x00,0x1f,0xa4,0x00,0x03,0x00,0x1f,0xa0,0x00,0x01,
-  0x09,0x00,0x1f,0xa8,0x00,0x03,0x00,0x1f,0xa4,0x00,0x01,0x09,0x00,0x1f,0xac,0x00,
-  0x03,0x00,0x1f,0xa8,0x00,0x01,0x09,0x00,0x1f,0xb0,0x00,0x03,0x00,0x1f,0xac,0x00,
-  0x01,0x09,0x00,0x1f,0xc0,0x00,0x03,0x00,0x1f,0xb0,0x00,0x01,0x09,0x00,0x1f,0xc4,
-  0x00,0x03,0x00,0x1f,0xc0,0x00,0x01,0x09,0x00,0x1f,0xc8,0x00,0x03,0x00,0x1f,0xc4,
-  0x00,0x01,0x09,0x00,0x1f,0xcc,0x00,0x03,0x00,0x1f,0xc8,0x00,0x01,0x09,0x00,0x1f,
-  0xd0,0x00,0x03,0x00,0x1f,0xcc,0x00,0x01,0x09,0x00,0x20,0x03,0x03,0x03,0x00,0x1f,
-  0xd0,0x00,0x01,0x09,0x00,0x20,0x04,0x00,0x03,0x00,0x20,0x03,0x03,0x01,0x09,0x00,
-  0x20,0x08,0x00,0x03,0x00,0x20,0x04,0x00,0x01,0x09,0x00,0x20,0x0c,0x00,0x03,0x00,
-  0x20,0x08,0x00,0x01,0x09,0x00,0x20,0x13,0x03,0x03,0x00,0x20,0x0c,0x00,0x01,0x09,
-  0x00,0x20,0x20,0x00,0x03,0x00,0x20,0x13,0x03,0x01,0x09,0x00,0x20,0x24,0x00,0x03,
-  0x00,0x20,0x20,0x00,0x01,0x09,0x00,0x20,0x28,0x00,0x03,0x00,0x20,0x24,0x00,0x01,
-  0x09,0x00,0x20,0x2c,0x00,0x03,0x00,0x20,0x28,0x00,0x01,0x09,0x00,0x20,0x30,0x00,
-  0x03,0x00,0x20,0x2c,0x00,0x01,0x09,0x00,0x20,0x40,0x00,0x03,0x00,0x20,0x30,0x00,
-  0x01,0x09,0x00,0x20,0x44,0x00,0x03,0x00,0x20,0x40,0x00,0x01,0x09,0x00,0x20,0x48,
-  0x00,0x03,0x00,0x20,0x44,0x00,0x01,0x09,0x00,0x20,0x4c,0x00,0x03,0x00,0x20,0x48,
-  0x00,0x01,0x09,0x00,0x20,0x50,0x00,0x03,0x00,0x20,0x4c,0x00,0x01,0x09,0x00,0x20,
-  0x80,0x00,0x03,0x00,0x20,0x50,0x00,0x01,0x09,0x00,0x20,0x85,0x00,0x03,0x00,0x20,
-  0x80,0x00,0x01,0x09,0x00,0x20,0x88,0x00,0x03,0x00,0x20,0x85,0x00,0x01,0x09,0x00,
-  0x20,0x8c,0x00,0x03,0x00,0x20,0x88,0x00,0x01,0x09,0x00,0x20,0x90,0x00,0x03,0x00,
-  0x20,0x8c,0x00,0x01,0x09,0x00,0x20,0xa0,0x00,0x03,0x00,0x20,0x90,0x00,0x01,0x09,
-  0x00,0x20,0xa4,0x00,0x03,0x00,0x20,0xa0,0x00,0x01,0x09,0x00,0x20,0xa8,0x00,0x03,
-  0x00,0x20,0xa4,0x00,0x01,0x09,0x00,0x20,0xac,0x00,0x03,0x00,0x20,0xa8,0x00,0x01,
-  0x09,0x00,0x20,0xb0,0x00,0x03,0x00,0x20,0xac,0x00,0x01,0x09,0x00,0x20,0xc0,0x00,
-  0x03,0x00,0x20,0xb0,0x00,0x01,0x09,0x00,0x20,0xc4,0x00,0x03,0x00,0x20,0xc0,0x00,
-  0x01,0x09,0x00,0x20,0xc8,0x00,0x03,0x00,0x20,0xc4,0x00,0x01,0x09,0x00,0x20,0xcc,
-  0x00,0x03,0x00,0x20,0xc8,0x00,0x01,0x09,0x00,0x20,0xd0,0x00,0x03,0x00,0x20,0xcc,
-  0x00,0x01,0x09,0x00,0x21,0x01,0x01,0x03,0x00,0x20,0xd0,0x00,0x01,0x09,0x00,0x21,
-  0x04,0x00,0x03,0x00,0x21,0x01,0x01,0x01,0x09,0x00,0x21,0x08,0x00,0x03,0x00,0x21,
-  0x04,0x00,0x01,0x09,0x00,0x21,0x0c,0x00,0x03,0x00,0x21,0x08,0x00,0x01,0x09,0x00,
-  0x21,0x10,0x00,0x03,0x00,0x21,0x0c,0x00,0x01,0x09,0x00,0x21,0x20,0x00,0x03,0x00,
-  0x21,0x10,0x00,0x01,0x09,0x00,0x21,0x24,0x00,0x03,0x00,0x21,0x20,0x00,0x01,0x09,
-  0x00,0x21,0x28,0x00,0x03,0x00,0x21,0x24,0x00,0x01,0x09,0x00,0x21,0x2c,0x00,0x03,
-  0x00,0x21,0x28,0x00,0x01,0x09,0x00,0x21,0x30,0x00,0x03,0x00,0x21,0x2c,0x00,0x01,
-  0x09,0x00,0x21,0x40,0x00,0x03,0x00,0x21,0x30,0x00,0x01,0x09,0x00,0x21,0x44,0x00,
-  0x03,0x00,0x21,0x40,0x00,0x01,0x09,0x00,0x21,0x48,0x00,0x03,0x00,0x21,0x44,0x00,
-  0x01,0x09,0x00,0x21,0x4c,0x00,0x03,0x00,0x21,0x48,0x00,0x01,0x09,0x00,0x21,0x50,
-  0x00,0x03,0x00,0x21,0x4c,0x00,0x01,0x09,0x00,0x21,0x81,0x01,0x03,0x00,0x21,0x50,
-  0x00,0x01,0x09,0x00,0x21,0x84,0x00,0x03,0x00,0x21,0x81,0x01,0x01,0x09,0x00,0x21,
-  0x88,0x00,0x03,0x00,0x21,0x84,0x00,0x01,0x09,0x00,0x21,0x8c,0x00,0x03,0x00,0x21,
-  0x88,0x00,0x01,0x09,0x00,0x21,0x91,0x01,0x03,0x00,0x21,0x8c,0x00,0x01,0x09,0x00,
-  0x21,0xa0,0x40,0x03,0x00,0x21,0x91,0x01,0x01,0x09,0x00,0x21,0xa4,0x00,0x03,0x00,
-  0x21,0xa0,0x40,0x01,0x09,0x00,0x21,0xa8,0x00,0x03,0x00,0x21,0xa4,0x00,0x01,0x09,
-  0x00,0x21,0xac,0x00,0x03,0x00,0x21,0xa8,0x00,0x01,0x09,0x00,0x21,0xb0,0x00,0x03,
-  0x00,0x21,0xac,0x00,0x01,0x09,0x00,0x21,0xc0,0x00,0x03,0x00,0x21,0xb0,0x00,0x01,
-  0x09,0x00,0x21,0xc4,0x00,0x03,0x00,0x21,0xc0,0x00,0x01,0x09,0x00,0x21,0xc8,0x00,
-  0x03,0x00,0x21,0xc4,0x00,0x01,0x09,0x00,0x21,0xcc,0x00,0x03,0x00,0x21,0xc8,0x00,
-  0x01,0x09,0x00,0x21,0xd0,0x00,0x03,0x00,0x21,0xcc,0x00,0x01,0x09,0x00,0x22,0x00,
-  0x00,0x03,0x00,0x21,0xd0,0x00,0x01,0x09,0x00,0x22,0x04,0x00,0x03,0x00,0x22,0x00,
-  0x00,0x01,0x09,0x00,0x22,0x08,0x00,0x03,0x00,0x22,0x04,0x00,0x01,0x09,0x00,0x22,
-  0x0c,0x00,0x03,0x00,0x22,0x08,0x00,0x01,0x09,0x00,0x22,0x10,0x00,0x03,0x00,0x22,
-  0x0c,0x00,0x01,0x09,0x00,0x22,0x20,0x00,0x03,0x00,0x22,0x10,0x00,0x01,0x09,0x00,
-  0x22,0x24,0x00,0x03,0x00,0x22,0x20,0x00,0x01,0x09,0x00,0x22,0x28,0x00,0x03,0x00,
-  0x22,0x24,0x00,0x01,0x09,0x00,0x22,0x2c,0x00,0x03,0x00,0x22,0x28,0x00,0x01,0x09,
-  0x00,0x22,0x30,0x00,0x03,0x00,0x22,0x2c,0x00,0x01,0x09,0x00,0x22,0x40,0x00,0x03,
-  0x00,0x22,0x30,0x00,0x01,0x09,0x00,0x22,0x44,0x00,0x03,0x00,0x22,0x40,0x00,0x01,
-  0x09,0x00,0x22,0x48,0x00,0x03,0x00,0x22,0x44,0x00,0x01,0x09,0x00,0x22,0x4c,0x00,
-  0x03,0x00,0x22,0x48,0x00,0x01,0x09,0x00,0x22,0x50,0x00,0x03,0x00,0x22,0x4c,0x00,
-  0x01,0x09,0x00,0x22,0x80,0x00,0x03,0x00,0x22,0x50,0x00,0x01,0x09,0x00,0x22,0x84,
-  0x00,0x03,0x00,0x22,0x80,0x00,0x01,0x09,0x00,0x22,0x88,0x00,0x03,0x00,0x22,0x84,
-  0x00,0x01,0x09,0x00,0x22,0x8c,0x00,0x03,0x00,0x22,0x88,0x00,0x01,0x09,0x00,0x22,
-  0x90,0x00,0x03,0x00,0x22,0x8c,0x00,0x01,0x09,0x00,0x22,0xa0,0x00,0x03,0x00,0x22,
-  0x90,0x00,0x01,0x09,0x00,0x22,0xa4,0x00,0x03,0x00,0x22,0xa0,0x00,0x01,0x09,0x00,
-  0x22,0xa8,0x00,0x03,0x00,0x22,0xa4,0x00,0x01,0x09,0x00,0x22,0xac,0x00,0x03,0x00,
-  0x22,0xa8,0x00,0x01,0x09,0x00,0x22,0xb0,0x00,0x03,0x00,0x22,0xac,0x00,0x01,0x09,
-  0x00,0x22,0xc0,0x00,0x03,0x00,0x22,0xb0,0x00,0x01,0x09,0x00,0x22,0xc4,0x00,0x03,
-  0x00,0x22,0xc0,0x00,0x01,0x09,0x00,0x22,0xc8,0x00,0x03,0x00,0x22,0xc4,0x00,0x01,
-  0x09,0x00,0x22,0xcc,0x00,0x03,0x00,0x22,0xc8,0x00,0x01,0x09,0x00,0x22,0xd0,0x00,
-  0x03,0x00,0x22,0xcc,0x00,0x01,0x09,0x00,0x23,0x00,0x00,0x03,0x00,0x22,0xd0,0x00,
-  0x01,0x09,0x00,0x23,0x04,0x00,0x03,0x00,0x23,0x00,0x00,0x01,0x09,0x00,0x23,0x08,
-  0x00,0x03,0x00,0x23,0x04,0x00,0x01,0x09,0x00,0x23,0x0c,0x00,0x03,0x00,0x23,0x08,
-  0x00,0x01,0x09,0x00,0x23,0x10,0x00,0x03,0x00,0x23,0x0c,0x00,0x01,0x09,0x00,0x23,
-  0x20,0x00,0x03,0x00,0x23,0x10,0x00,0x01,0x09,0x00,0x23,0x24,0x00,0x03,0x00,0x23,
-  0x20,0x00,0x01,0x09,0x00,0x23,0x28,0x00,0x03,0x00,0x23,0x24,0x00,0x01,0x09,0x00,
-  0x23,0x2c,0x00,0x03,0x00,0x23,0x28,0x00,0x01,0x09,0x00,0x23,0x30,0x00,0x03,0x00,
-  0x23,0x2c,0x00,0x01,0x09,0x00,0x23,0x40,0x00,0x03,0x00,0x23,0x30,0x00,0x01,0x09,
-  0x00,0x23,0x44,0x00,0x03,0x00,0x23,0x40,0x00,0x01,0x09,0x00,0x23,0x48,0x00,0x03,
-  0x00,0x23,0x44,0x00,0x01,0x09,0x00,0x23,0x4c,0x00,0x03,0x00,0x23,0x48,0x00,0x01,
-  0x09,0x00,0x23,0x50,0x00,0x03,0x00,0x23,0x4c,0x00,0x01,0x09,0x00,0x23,0x81,0x01,
-  0x03,0x00,0x23,0x50,0x00,0x01,0x09,0x00,0x23,0x84,0x00,0x03,0x00,0x23,0x81,0x01,
-  0x01,0x09,0x00,0x23,0x88,0x00,0x03,0x00,0x23,0x84,0x00,0x01,0x09,0x00,0x23,0x8c,
-  0x00,0x03,0x00,0x23,0x88,0x00,0x01,0x09,0x00,0x23,0x91,0x01,0x03,0x00,0x23,0x8c,
-  0x00,0x01,0x09,0x00,0x23,0xa0,0x00,0x03,0x00,0x23,0x91,0x01,0x01,0x09,0x00,0x23,
-  0xa4,0x00,0x03,0x00,0x23,0xa0,0x00,0x01,0x09,0x00,0x23,0xa8,0x00,0x03,0x00,0x23,
-  0xa4,0x00,0x01,0x09,0x00,0x23,0xac,0x00,0x03,0x00,0x23,0xa8,0x00,0x01,0x09,0x00,
-  0x23,0xb0,0x00,0x03,0x00,0x23,0xac,0x00,0x01,0x09,0x00,0x23,0xc0,0x00,0x03,0x00,
-  0x23,0xb0,0x00,0x01,0x09,0x00,0x23,0xc4,0x00,0x03,0x00,0x23,0xc0,0x00,0x01,0x09,
-  0x00,0x23,0xc8,0x00,0x03,0x00,0x23,0xc4,0x00,0x01,0x09,0x00,0x23,0xcc,0x00,0x03,
-  0x00,0x23,0xc8,0x00,0x01,0x09,0x00,0x23,0xd0,0x00,0x03,0x00,0x23,0xcc,0x00,0x01,
-  0x09,0x00,0x24,0x01,0x01,0x03,0x00,0x23,0xd0,0x00,0x01,0x09,0x00,0x24,0x06,0x00,
-  0x03,0x00,0x24,0x01,0x01,0x01,0x09,0x00,0x24,0x08,0x00,0x03,0x00,0x24,0x06,0x00,
-  0x01,0x09,0x00,0x24,0x0c,0x00,0x03,0x00,0x24,0x08,0x00,0x01,0x09,0x00,0x24,0x10,
-  0x00,0x03,0x00,0x24,0x0c,0x00,0x01,0x09,0x00,0x24,0x20,0x00,0x03,0x00,0x24,0x10,
-  0x00,0x01,0x09,0x00,0x24,0x24,0x00,0x03,0x00,0x24,0x20,0x00,0x01,0x09,0x00,0x24,
-  0x28,0x00,0x03,0x00,0x24,0x24,0x00,0x01,0x09,0x00,0x24,0x2c,0x00,0x03,0x00,0x24,
-  0x28,0x00,0x01,0x09,0x00,0x24,0x30,0x00,0x03,0x00,0x24,0x2c,0x00,0x01,0x09,0x00,
-  0x24,0x40,0x00,0x03,0x00,0x24,0x30,0x00,0x01,0x09,0x00,0x24,0x44,0x00,0x03,0x00,
-  0x24,0x40,0x00,0x01,0x09,0x00,0x24,0x48,0x00,0x03,0x00,0x24,0x44,0x00,0x01,0x09,
-  0x00,0x24,0x4c,0x00,0x03,0x00,0x24,0x48,0x00,0x01,0x09,0x00,0x24,0x50,0x00,0x03,
-  0x00,0x24,0x4c,0x00,0x01,0x09,0x00,0x24,0x80,0x22,0x03,0x00,0x24,0x50,0x00,0x01,
-  0x09,0x00,0x24,0x85,0x00,0x03,0x00,0x24,0x80,0x22,0x01,0x09,0x00,0x24,0x88,0x00,
-  0x03,0x00,0x24,0x85,0x00,0x01,0x09,0x00,0x24,0x8c,0x00,0x03,0x00,0x24,0x88,0x00,
-  0x01,0x09,0x00,0x24,0x90,0x00,0x03,0x00,0x24,0x8c,0x00,0x01,0x09,0x00,0x24,0xa0,
-  0x00,0x03,0x00,0x24,0x90,0x00,0x01,0x09,0x00,0x24,0xa4,0x00,0x03,0x00,0x24,0xa0,
-  0x00,0x01,0x09,0x00,0x24,0xa8,0x00,0x03,0x00,0x24,0xa4,0x00,0x01,0x09,0x00,0x24,
-  0xac,0x00,0x03,0x00,0x24,0xa8,0x00,0x01,0x09,0x00,0x24,0xb0,0x00,0x03,0x00,0x24,
-  0xac,0x00,0x01,0x09,0x00,0x24,0xc0,0x00,0x03,0x00,0x24,0xb0,0x00,0x01,0x09,0x00,
-  0x24,0xc4,0x00,0x03,0x00,0x24,0xc0,0x00,0x01,0x09,0x00,0x24,0xc8,0x00,0x03,0x00,
-  0x24,0xc4,0x00,0x01,0x09,0x00,0x24,0xcc,0x00,0x03,0x00,0x24,0xc8,0x00,0x01,0x09,
-  0x00,0x24,0xd0,0x00,0x03,0x00,0x24,0xcc,0x00,0x01,0x09,0x00,0x25,0x00,0x00,0x03,
-  0x00,0x24,0xd0,0x00,0x01,0x09,0x00,0x25,0x04,0x00,0x03,0x00,0x25,0x00,0x00,0x01,
-  0x09,0x00,0x25,0x08,0x00,0x03,0x00,0x25,0x04,0x00,0x01,0x09,0x00,0x25,0x0c,0x00,
-  0x03,0x00,0x25,0x08,0x00,0x01,0x09,0x00,0x25,0x10,0x00,0x03,0x00,0x25,0x0c,0x00,
-  0x01,0x09,0x00,0x25,0x20,0x00,0x03,0x00,0x25,0x10,0x00,0x01,0x09,0x00,0x25,0x24,
-  0x00,0x03,0x00,0x25,0x20,0x00,0x01,0x09,0x00,0x25,0x28,0x00,0x03,0x00,0x25,0x24,
-  0x00,0x01,0x09,0x00,0x25,0x2c,0x00,0x03,0x00,0x25,0x28,0x00,0x01,0x09,0x00,0x25,
-  0x30,0x00,0x03,0x00,0x25,0x2c,0x00,0x01,0x09,0x00,0x25,0x40,0x00,0x03,0x00,0x25,
-  0x30,0x00,0x01,0x09,0x00,0x25,0x44,0x00,0x03,0x00,0x25,0x40,0x00,0x01,0x09,0x00,
-  0x25,0x48,0x00,0x03,0x00,0x25,0x44,0x00,0x01,0x09,0x00,0x25,0x4c,0x00,0x03,0x00,
-  0x25,0x48,0x00,0x01,0x09,0x00,0x25,0x50,0x00,0x03,0x00,0x25,0x4c,0x00,0x01,0x09,
-  0x00,0x25,0x80,0x00,0x03,0x00,0x25,0x50,0x00,0x01,0x09,0x00,0x25,0x84,0x00,0x03,
-  0x00,0x25,0x80,0x00,0x01,0x09,0x00,0x25,0x88,0x00,0x03,0x00,0x25,0x84,0x00,0x01,
-  0x09,0x00,0x25,0x8c,0x00,0x03,0x00,0x25,0x88,0x00,0x01,0x09,0x00,0x25,0x90,0x00,
-  0x03,0x00,0x25,0x8c,0x00,0x01,0x09,0x00,0x25,0xa0,0x00,0x03,0x00,0x25,0x90,0x00,
-  0x01,0x09,0x00,0x25,0xa4,0x00,0x03,0x00,0x25,0xa0,0x00,0x01,0x09,0x00,0x25,0xa8,
-  0x00,0x03,0x00,0x25,0xa4,0x00,0x01,0x09,0x00,0x25,0xac,0x00,0x03,0x00,0x25,0xa8,
-  0x00,0x01,0x09,0x00,0x25,0xb0,0x00,0x03,0x00,0x25,0xac,0x00,0x01,0x09,0x00,0x25,
-  0xc0,0x00,0x03,0x00,0x25,0xb0,0x00,0x01,0x09,0x00,0x25,0xc4,0x00,0x03,0x00,0x25,
-  0xc0,0x00,0x01,0x09,0x00,0x25,0xc8,0x00,0x03,0x00,0x25,0xc4,0x00,0x01,0x09,0x00,
-  0x25,0xcc,0x00,0x03,0x00,0x25,0xc8,0x00,0x01,0x09,0x00,0x25,0xd0,0x00,0x03,0x00,
-  0x25,0xcc,0x00,0x01,0x09,0x00,0x26,0x00,0x00,0x03,0x00,0x25,0xd0,0x00,0x01,0x09,
-  0x00,0x26,0x05,0x01,0x03,0x00,0x26,0x00,0x00,0x01,0x09,0x00,0x26,0x08,0x00,0x03,
-  0x00,0x26,0x05,0x01,0x01,0x09,0x00,0x26,0x0c,0x00,0x03,0x00,0x26,0x08,0x00,0x01,
-  0x09,0x00,0x26,0x10,0x00,0x03,0x00,0x26,0x0c,0x00,0x01,0x09,0x00,0x26,0x20,0x00,
-  0x03,0x00,0x26,0x10,0x00,0x01,0x09,0x00,0x26,0x24,0x00,0x03,0x00,0x26,0x20,0x00,
-  0x01,0x09,0x00,0x26,0x28,0x00,0x03,0x00,0x26,0x24,0x00,0x01,0x09,0x00,0x26,0x2c,
-  0x00,0x03,0x00,0x26,0x28,0x00,0x01,0x09,0x00,0x26,0x30,0x00,0x03,0x00,0x26,0x2c,
-  0x00,0x01,0x09,0x00,0x26,0x40,0x00,0x03,0x00,0x26,0x30,0x00,0x01,0x09,0x00,0x26,
-  0x44,0x00,0x03,0x00,0x26,0x40,0x00,0x01,0x09,0x00,0x26,0x48,0x00,0x03,0x00,0x26,
-  0x44,0x00,0x01,0x09,0x00,0x26,0x4c,0x00,0x03,0x00,0x26,0x48,0x00,0x01,0x09,0x00,
-  0x26,0x50,0x00,0x03,0x00,0x26,0x4c,0x00,0x01,0x09,0x00,0x26,0x80,0x00,0x03,0x00,
-  0x26,0x50,0x00,0x01,0x09,0x00,0x26,0x84,0x00,0x03,0x00,0x26,0x80,0x00,0x01,0x09,
-  0x00,0x26,0x88,0x00,0x03,0x00,0x26,0x84,0x00,0x01,0x09,0x00,0x26,0x8c,0x00,0x03,
-  0x00,0x26,0x88,0x00,0x01,0x09,0x00,0x26,0x90,0x00,0x03,0x00,0x26,0x8c,0x00,0x01,
-  0x09,0x00,0x26,0xa0,0x00,0x03,0x00,0x26,0x90,0x00,0x01,0x09,0x00,0x26,0xa4,0x00,
-  0x03,0x00,0x26,0xa0,0x00,0x01,0x09,0x00,0x26,0xa8,0x00,0x03,0x00,0x26,0xa4,0x00,
-  0x01,0x09,0x00,0x26,0xac,0x00,0x03,0x00,0x26,0xa8,0x00,0x01,0x09,0x00,0x26,0xb0,
-  0x00,0x03,0x00,0x26,0xac,0x00,0x01,0x09,0x00,0x26,0xc0,0x00,0x03,0x00,0x26,0xb0,
-  0x00,0x01,0x09,0x00,0x26,0xc4,0x00,0x03,0x00,0x26,0xc0,0x00,0x01,0x09,0x00,0x26,
-  0xc8,0x00,0x03,0x00,0x26,0xc4,0x00,0x01,0x09,0x00,0x26,0xcc,0x00,0x03,0x00,0x26,
-  0xc8,0x00,0x01,0x09,0x00,0x26,0xd0,0x00,0x03,0x00,0x26,0xcc,0x00,0x01,0x09,0x00,
-  0x27,0x01,0x01,0x03,0x00,0x26,0xd0,0x00,0x01,0x09,0x00,0x27,0x04,0x00,0x03,0x00,
-  0x27,0x01,0x01,0x01,0x09,0x00,0x27,0x08,0x00,0x03,0x00,0x27,0x04,0x00,0x01,0x09,
-  0x00,0x27,0x0c,0x00,0x03,0x00,0x27,0x08,0x00,0x01,0x09,0x00,0x27,0x10,0x00,0x03,
-  0x00,0x27,0x0c,0x00,0x01,0x09,0x00,0x27,0x20,0x00,0x03,0x00,0x27,0x10,0x00,0x01,
-  0x09,0x00,0x27,0x25,0x01,0x03,0x00,0x27,0x20,0x00,0x01,0x09,0x00,0x27,0x28,0x00,
-  0x03,0x00,0x27,0x25,0x01,0x01,0x09,0x00,0x27,0x2c,0x00,0x03,0x00,0x27,0x28,0x00,
-  0x01,0x09,0x00,0x27,0x30,0x00,0x03,0x00,0x27,0x2c,0x00,0x01,0x09,0x00,0x27,0x40,
-  0x00,0x03,0x00,0x27,0x30,0x00,0x01,0x09,0x00,0x27,0x44,0x00,0x03,0x00,0x27,0x40,
-  0x00,0x01,0x09,0x00,0x27,0x48,0x00,0x03,0x00,0x27,0x44,0x00,0x01,0x09,0x00,0x27,
-  0x4c,0x00,0x03,0x00,0x27,0x48,0x00,0x01,0x09,0x00,0x27,0x50,0x00,0x03,0x00,0x27,
-  0x4c,0x00,0x01,0x09,0x00,0x27,0x80,0x00,0x03,0x00,0x27,0x50,0x00,0x01,0x09,0x00,
-  0x27,0x84,0x00,0x03,0x00,0x27,0x80,0x00,0x01,0x09,0x00,0x27,0x88,0x00,0x03,0x00,
-  0x27,0x84,0x00,0x01,0x09,0x00,0x27,0x8c,0x00,0x03,0x00,0x27,0x88,0x00,0x01,0x09,
-  0x00,0x27,0x90,0x00,0x03,0x00,0x27,0x8c,0x00,0x01,0x09,0x00,0x27,0xa0,0x00,0x03,
-  0x00,0x27,0x90,0x00,0x01,0x09,0x00,0x27,0xa4,0x00,0x03,0x00,0x27,0xa0,0x00,0x01,
-  0x09,0x00,0x27,0xa8,0x00,0x03,0x00,0x27,0xa4,0x00,0x01,0x09,0x00,0x27,0xac,0x00,
-  0x03,0x00,0x27,0xa8,0x00,0x01,0x09,0x00,0x27,0xb0,0x00,0x03,0x00,0x27,0xac,0x00,
-  0x01,0x09,0x00,0x27,0xc0,0x00,0x03,0x00,0x27,0xb0,0x00,0x01,0x09,0x00,0x27,0xc4,
-  0x00,0x03,0x00,0x27,0xc0,0x00,0x01,0x09,0x00,0x27,0xc8,0x00,0x03,0x00,0x27,0xc4,
-  0x00,0x01,0x09,0x00,0x27,0xcc,0x00,0x03,0x00,0x27,0xc8,0x00,0x01,0x09,0x00,0x27,
-  0xd0,0x00,0x03,0x00,0x27,0xcc,0x00,0x01,0x09,0x00,0x28,0x00,0x00,0x03,0x00,0x27,
-  0xd0,0x00,0x01,0x09,0x00,0x28,0x04,0x00,0x03,0x00,0x28,0x00,0x00,0x01,0x09,0x00,
-  0x28,0x08,0x00,0x03,0x00,0x28,0x04,0x00,0x01,0x09,0x00,0x28,0x0c,0x00,0x03,0x00,
-  0x28,0x08,0x00,0x01,0x09,0x00,0x28,0x10,0x00,0x03,0x00,0x28,0x0c,0x00,0x01,0x09,
-  0x00,0x28,0x20,0x00,0x13,0x00,0x28,0x10,0x00,0x01,0x09,0x00,0x28,0x24,0x00,0x13,
-  0x00,0x28,0x20,0x00,0x11,0x09,0x00,0x28,0x28,0x00,0x13,0x00,0x28,0x24,0x00,0x11,
-  0x09,0x00,0x28,0x2c,0x00,0x13,0x00,0x28,0x28,0x00,0x11,0x09,0x00,0x28,0x30,0x00,
-  0x13,0x00,0x28,0x2c,0x00,0x11,0x09,0x00,0x28,0x40,0x00,0x03,0x00,0x28,0x30,0x00,
-  0x11,0x09,0x00,0x28,0x44,0x00,0x03,0x00,0x28,0x40,0x00,0x01,0x09,0x00,0x28,0x48,
-  0x00,0x03,0x00,0x28,0x44,0x00,0x01,0x09,0x00,0x28,0x4c,0x00,0x03,0x00,0x28,0x48,
-  0x00,0x01,0x09,0x00,0x28,0x50,0x00,0x03,0x00,0x28,0x4c,0x00,0x01,0x09,0x00,0x28,
-  0x80,0x80,0x03,0x00,0x28,0x50,0x00,0x01,0x09,0x00,0x28,0x84,0x80,0x03,0x00,0x28,
-  0x80,0x80,0x01,0x09,0x00,0x28,0x88,0x80,0x03,0x00,0x28,0x84,0x80,0x01,0x09,0x00,
-  0x28,0x8c,0x80,0x03,0x00,0x28,0x88,0x80,0x01,0x09,0x00,0x28,0x90,0x80,0x03,0x00,
-  0x28,0x8c,0x80,0x01,0x09,0x00,0x28,0xa0,0x00,0x03,0x00,0x28,0x90,0x80,0x01,0x09,
-  0x00,0x28,0xa4,0x00,0x03,0x00,0x28,0xa0,0x00,0x01,0x09,0x00,0x28,0xa8,0x00,0x03,
-  0x00,0x28,0xa4,0x00,0x01,0x09,0x00,0x28,0xac,0x00,0x03,0x00,0x28,0xa8,0x00,0x01,
-  0x09,0x00,0x28,0xb0,0x00,0x03,0x00,0x28,0xac,0x00,0x01,0x09,0x00,0x28,0xc0,0x00,
-  0x13,0x00,0x28,0xb0,0x00,0x01,0x09,0x00,0x28,0xc4,0x00,0x13,0x00,0x28,0xc0,0x00,
-  0x11,0x09,0x00,0x28,0xc8,0x00,0x13,0x00,0x28,0xc4,0x00,0x11,0x09,0x00,0x28,0xcc,
-  0x00,0x13,0x00,0x28,0xc8,0x00,0x11,0x09,0x00,0x28,0xd0,0x00,0x13,0x00,0x28,0xcc,
-  0x00,0x11,0x09,0x00,0x29,0x00,0x00,0x03,0x00,0x28,0xd0,0x00,0x11,0x09,0x00,0x29,
-  0x04,0x00,0x03,0x00,0x29,0x00,0x00,0x01,0x09,0x00,0x29,0x08,0x00,0x03,0x00,0x29,
-  0x04,0x00,0x01,0x09,0x00,0x29,0x0c,0x00,0x03,0x00,0x29,0x08,0x00,0x01,0x09,0x00,
-  0x29,0x10,0x00,0x03,0x00,0x29,0x0c,0x00,0x01,0x09,0x00,0x29,0x20,0x00,0x03,0x00,
-  0x29,0x10,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x03,0x00,0x29,0x20,0x00,0x01,0x09,
-  0x00,0x29,0x28,0x00,0x03,0x00,0x29,0x24,0x00,0x01,0x09,0x00,0x29,0x2c,0x00,0x03,
-  0x00,0x29,0x28,0x00,0x01,0x09,0x00,0x29,0x30,0x00,0x03,0x00,0x29,0x2c,0x00,0x01,
-  0x09,0x00,0x29,0x40,0x00,0x03,0x00,0x29,0x30,0x00,0x01,0x09,0x00,0x29,0x44,0x00,
-  0x03,0x00,0x29,0x40,0x00,0x01,0x09,0x00,0x29,0x48,0x00,0x03,0x00,0x29,0x44,0x00,
-  0x01,0x09,0x00,0x29,0x4c,0x00,0x03,0x00,0x29,0x48,0x00,0x01,0x09,0x00,0x29,0x50,
-  0x00,0x03,0x00,0x29,0x4c,0x00,0x01,0x09,0x00,0x29,0x80,0x00,0x03,0x00,0x29,0x50,
-  0x00,0x01,0x09,0x00,0x29,0x84,0x00,0xc3,0x00,0x29,0x80,0x00,0x01,0x09,0x00,0x29,
-  0x88,0x00,0x03,0x00,0x29,0x84,0x00,0xc1,0x09,0x00,0x29,0x8c,0x00,0x03,0x00,0x29,
-  0x88,0x00,0x01,0x09,0x00,0x29,0x90,0x00,0x03,0x00,0x29,0x8c,0x00,0x01,0x09,0x00,
-  0x29,0xa0,0x00,0x03,0x00,0x29,0x90,0x00,0x01,0x09,0x00,0x29,0xa4,0x80,0xe3,0x00,
-  0x29,0xa0,0x00,0x01,0x09,0x00,0x29,0xa8,0x00,0x03,0x00,0x29,0xa4,0x80,0xe1,0x09,
-  0x00,0x29,0xac,0x00,0x03,0x00,0x29,0xa8,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,0x03,
-  0x00,0x29,0xac,0x00,0x01,0x09,0x00,0x29,0xc0,0x00,0x03,0x00,0x29,0xb0,0x00,0x01,
-  0x09,0x00,0x29,0xc4,0x00,0x63,0x00,0x29,0xc0,0x00,0x01,0x09,0x00,0x29,0xc8,0x00,
-  0x03,0x00,0x29,0xc4,0x00,0x61,0x09,0x00,0x29,0xcc,0x00,0x03,0x00,0x29,0xc8,0x00,
-  0x01,0x09,0x00,0x29,0xd0,0x00,0x03,0x00,0x29,0xcc,0x00,0x01,0x09,0x00,0x2a,0x00,
-  0x00,0x03,0x00,0x29,0xd0,0x00,0x01,0x09,0x00,0x2a,0x04,0x00,0x03,0x00,0x2a,0x00,
-  0x00,0x01,0x09,0x00,0x2a,0x08,0x00,0x03,0x00,0x2a,0x04,0x00,0x01,0x09,0x00,0x2a,
-  0x0c,0x00,0x03,0x00,0x2a,0x08,0x00,0x01,0x09,0x00,0x2a,0x10,0x00,0x03,0x00,0x2a,
-  0x0c,0x00,0x01,0x09,0x00,0x2a,0x20,0x00,0x03,0x00,0x2a,0x10,0x00,0x01,0x09,0x00,
-  0x2a,0x24,0x00,0x03,0x00,0x2a,0x20,0x00,0x01,0x09,0x00,0x2a,0x28,0x00,0x03,0x00,
-  0x2a,0x24,0x00,0x01,0x09,0x00,0x2a,0x2c,0x00,0x03,0x00,0x2a,0x28,0x00,0x01,0x09,
-  0x00,0x2a,0x30,0x00,0x03,0x00,0x2a,0x2c,0x00,0x01,0x09,0x00,0x2a,0x40,0x00,0x03,
-  0x00,0x2a,0x30,0x00,0x01,0x09,0x00,0x2a,0x44,0x00,0x03,0x00,0x2a,0x40,0x00,0x01,
-  0x09,0x00,0x2a,0x48,0x00,0x03,0x00,0x2a,0x44,0x00,0x01,0x09,0x00,0x2a,0x4c,0x00,
-  0x03,0x00,0x2a,0x48,0x00,0x01,0x09,0x00,0x2a,0x50,0x00,0x03,0x00,0x2a,0x4c,0x00,
-  0x01,0x09,0x00,0x2a,0x80,0x00,0x03,0x00,0x2a,0x50,0x00,0x01,0x09,0x00,0x2a,0x84,
-  0x00,0x03,0x00,0x2a,0x80,0x00,0x01,0x09,0x00,0x2a,0x88,0x00,0x03,0x00,0x2a,0x84,
-  0x00,0x01,0x09,0x00,0x2a,0x8c,0x00,0x03,0x00,0x2a,0x88,0x00,0x01,0x09,0x00,0x2a,
-  0x90,0x00,0x03,0x00,0x2a,0x8c,0x00,0x01,0x09,0x00,0x2a,0xa0,0x00,0x03,0x00,0x2a,
-  0x90,0x00,0x01,0x09,0x00,0x2a,0xa4,0x00,0x03,0x00,0x2a,0xa0,0x00,0x01,0x09,0x00,
-  0x2a,0xa8,0x00,0x03,0x00,0x2a,0xa4,0x00,0x01,0x09,0x00,0x2a,0xac,0x00,0x03,0x00,
-  0x2a,0xa8,0x00,0x01,0x09,0x00,0x2a,0xb0,0x00,0x03,0x00,0x2a,0xac,0x00,0x01,0x09,
-  0x00,0x2a,0xc0,0x00,0x03,0x00,0x2a,0xb0,0x00,0x01,0x09,0x00,0x2a,0xc4,0x00,0x03,
-  0x00,0x2a,0xc0,0x00,0x01,0x09,0x00,0x2a,0xc8,0x00,0x03,0x00,0x2a,0xc4,0x00,0x01,
-  0x09,0x00,0x2a,0xcc,0x00,0x03,0x00,0x2a,0xc8,0x00,0x01,0x09,0x00,0x2a,0xd0,0x00,
-  0x03,0x00,0x2a,0xcc,0x00,0x01,0x09,0x00,0x2b,0x00,0x00,0x03,0x00,0x2a,0xd0,0x00,
-  0x01,0x09,0x00,0x2b,0x04,0x00,0x03,0x00,0x2b,0x00,0x00,0x01,0x09,0x00,0x2b,0x08,
-  0x00,0x03,0x00,0x2b,0x04,0x00,0x01,0x09,0x00,0x2b,0x0c,0x00,0x03,0x00,0x2b,0x08,
-  0x00,0x01,0x09,0x00,0x2b,0x10,0x00,0x03,0x00,0x2b,0x0c,0x00,0x01,0x09,0x00,0x2b,
-  0x20,0x00,0x03,0x00,0x2b,0x10,0x00,0x01,0x09,0x00,0x2b,0x24,0x00,0x03,0x00,0x2b,
-  0x20,0x00,0x01,0x09,0x00,0x2b,0x28,0x00,0x03,0x00,0x2b,0x24,0x00,0x01,0x09,0x00,
-  0x2b,0x2c,0x00,0x03,0x00,0x2b,0x28,0x00,0x01,0x09,0x00,0x2b,0x30,0x00,0x03,0x00,
-  0x2b,0x2c,0x00,0x01,0x09,0x00,0x2b,0x40,0x00,0x03,0x00,0x2b,0x30,0x00,0x01,0x09,
-  0x00,0x2b,0x44,0x00,0x03,0x00,0x2b,0x40,0x00,0x01,0x09,0x00,0x2b,0x48,0x00,0x03,
-  0x00,0x2b,0x44,0x00,0x01,0x09,0x00,0x2b,0x4c,0x00,0x03,0x00,0x2b,0x48,0x00,0x01,
-  0x09,0x00,0x2b,0x50,0x00,0x03,0x00,0x2b,0x4c,0x00,0x01,0x09,0x00,0x2b,0x80,0x00,
-  0x03,0x00,0x2b,0x50,0x00,0x01,0x09,0x00,0x2b,0x84,0x00,0x03,0x00,0x2b,0x80,0x00,
-  0x01,0x09,0x00,0x2b,0x88,0x00,0x03,0x00,0x2b,0x84,0x00,0x01,0x09,0x00,0x2b,0x8c,
-  0x00,0x03,0x00,0x2b,0x88,0x00,0x01,0x09,0x00,0x2b,0x90,0x00,0x03,0x00,0x2b,0x8c,
-  0x00,0x01,0x09,0x00,0x2b,0xa0,0x00,0x03,0x00,0x2b,0x90,0x00,0x01,0x09,0x00,0x2b,
-  0xa4,0x00,0x03,0x00,0x2b,0xa0,0x00,0x01,0x09,0x00,0x2b,0xa8,0x00,0x03,0x00,0x2b,
-  0xa4,0x00,0x01,0x09,0x00,0x2b,0xac,0x00,0x03,0x00,0x2b,0xa8,0x00,0x01,0x09,0x00,
-  0x2b,0xb0,0x00,0x03,0x00,0x2b,0xac,0x00,0x01,0x09,0x00,0x2b,0xc0,0x00,0x03,0x00,
-  0x2b,0xb0,0x00,0x01,0x09,0x00,0x2b,0xc4,0x00,0x03,0x00,0x2b,0xc0,0x00,0x01,0x09,
-  0x00,0x2b,0xc8,0x00,0x03,0x00,0x2b,0xc4,0x00,0x01,0x09,0x00,0x2b,0xcc,0x00,0x03,
-  0x00,0x2b,0xc8,0x00,0x01,0x09,0x00,0x2b,0xd0,0x00,0x03,0x00,0x2b,0xcc,0x00,0x01,
-  0x09,0x00,0x2c,0x00,0x00,0x03,0x00,0x2b,0xd0,0x00,0x01,0x09,0x00,0x2c,0x04,0x00,
-  0x03,0x00,0x2c,0x00,0x00,0x01,0x09,0x00,0x2c,0x08,0x00,0x03,0x00,0x2c,0x04,0x00,
-  0x01,0x09,0x00,0x2c,0x0c,0x00,0x03,0x00,0x2c,0x08,0x00,0x01,0x09,0x00,0x2c,0x10,
-  0x00,0x03,0x00,0x2c,0x0c,0x00,0x01,0x09,0x00,0x2c,0x20,0x00,0x03,0x00,0x2c,0x10,
-  0x00,0x01,0x09,0x00,0x2c,0x24,0x00,0x03,0x00,0x2c,0x20,0x00,0x01,0x09,0x00,0x2c,
-  0x28,0x00,0x03,0x00,0x2c,0x24,0x00,0x01,0x09,0x00,0x2c,0x2c,0x00,0x03,0x00,0x2c,
-  0x28,0x00,0x01,0x09,0x00,0x2c,0x30,0x00,0x03,0x00,0x2c,0x2c,0x00,0x01,0x09,0x00,
-  0x2c,0x40,0x00,0x03,0x00,0x2c,0x30,0x00,0x01,0x09,0x00,0x2c,0x44,0x00,0x03,0x00,
-  0x2c,0x40,0x00,0x01,0x09,0x00,0x2c,0x48,0x00,0x03,0x00,0x2c,0x44,0x00,0x01,0x09,
-  0x00,0x2c,0x4c,0x00,0x03,0x00,0x2c,0x48,0x00,0x01,0x09,0x00,0x2c,0x50,0x00,0x03,
-  0x00,0x2c,0x4c,0x00,0x01,0x09,0x00,0x2c,0x80,0x00,0x03,0x00,0x2c,0x50,0x00,0x01,
-  0x09,0x00,0x2c,0x84,0x00,0x03,0x00,0x2c,0x80,0x00,0x01,0x09,0x00,0x2c,0x88,0x00,
-  0x03,0x00,0x2c,0x84,0x00,0x01,0x09,0x00,0x2c,0x8c,0x00,0x03,0x00,0x2c,0x88,0x00,
-  0x01,0x09,0x00,0x2c,0x90,0x00,0x03,0x00,0x2c,0x8c,0x00,0x01,0x09,0x00,0x2c,0xa0,
-  0x00,0x03,0x00,0x2c,0x90,0x00,0x01,0x09,0x00,0x2c,0xa4,0x00,0x03,0x00,0x2c,0xa0,
-  0x00,0x01,0x09,0x00,0x2c,0xa8,0x00,0x03,0x00,0x2c,0xa4,0x00,0x01,0x09,0x00,0x2c,
-  0xac,0x00,0x03,0x00,0x2c,0xa8,0x00,0x01,0x09,0x00,0x2c,0xb0,0x00,0x03,0x00,0x2c,
-  0xac,0x00,0x01,0x09,0x00,0x2c,0xc0,0x00,0x03,0x00,0x2c,0xb0,0x00,0x01,0x09,0x00,
-  0x2c,0xc4,0x00,0x03,0x00,0x2c,0xc0,0x00,0x01,0x09,0x00,0x2c,0xc8,0x00,0x03,0x00,
-  0x2c,0xc4,0x00,0x01,0x09,0x00,0x2c,0xcc,0x00,0x03,0x00,0x2c,0xc8,0x00,0x01,0x09,
-  0x00,0x2c,0xd0,0x00,0x03,0x00,0x2c,0xcc,0x00,0x01,0x09,0x00,0x2d,0x00,0x00,0x03,
-  0x00,0x2c,0xd0,0x00,0x01,0x09,0x00,0x2d,0x04,0x00,0x03,0x00,0x2d,0x00,0x00,0x01,
-  0x09,0x00,0x2d,0x08,0x00,0x03,0x00,0x2d,0x04,0x00,0x01,0x09,0x00,0x2d,0x0c,0x00,
-  0x03,0x00,0x2d,0x08,0x00,0x01,0x09,0x00,0x2d,0x10,0x00,0x03,0x00,0x2d,0x0c,0x00,
-  0x01,0x09,0x00,0x2d,0x20,0x00,0x03,0x00,0x2d,0x10,0x00,0x01,0x09,0x00,0x2d,0x24,
-  0x00,0x03,0x00,0x2d,0x20,0x00,0x01,0x09,0x00,0x2d,0x28,0x00,0x03,0x00,0x2d,0x24,
-  0x00,0x01,0x09,0x00,0x2d,0x2c,0x00,0x03,0x00,0x2d,0x28,0x00,0x01,0x09,0x00,0x2d,
-  0x30,0x00,0x03,0x00,0x2d,0x2c,0x00,0x01,0x09,0x00,0x2d,0x40,0x00,0x03,0x00,0x2d,
-  0x30,0x00,0x01,0x09,0x00,0x2d,0x44,0x00,0x03,0x00,0x2d,0x40,0x00,0x01,0x09,0x00,
-  0x2d,0x48,0x00,0x03,0x00,0x2d,0x44,0x00,0x01,0x09,0x00,0x2d,0x4c,0x00,0x03,0x00,
-  0x2d,0x48,0x00,0x01,0x09,0x00,0x2d,0x50,0x00,0x03,0x00,0x2d,0x4c,0x00,0x01,0x09,
-  0x00,0x2d,0x80,0x00,0x03,0x00,0x2d,0x50,0x00,0x01,0x09,0x00,0x2d,0x84,0x00,0x03,
-  0x00,0x2d,0x80,0x00,0x01,0x09,0x00,0x2d,0x88,0x00,0x03,0x00,0x2d,0x84,0x00,0x01,
-  0x09,0x00,0x2d,0x8c,0x00,0x03,0x00,0x2d,0x88,0x00,0x01,0x09,0x00,0x2d,0x90,0x00,
-  0x03,0x00,0x2d,0x8c,0x00,0x01,0x09,0x00,0x2d,0xa0,0x00,0x03,0x00,0x2d,0x90,0x00,
-  0x01,0x09,0x00,0x2d,0xa4,0x00,0x03,0x00,0x2d,0xa0,0x00,0x01,0x09,0x00,0x2d,0xa8,
-  0x00,0x03,0x00,0x2d,0xa4,0x00,0x01,0x09,0x00,0x2d,0xac,0x00,0x03,0x00,0x2d,0xa8,
-  0x00,0x01,0x09,0x00,0x2d,0xb0,0x00,0x03,0x00,0x2d,0xac,0x00,0x01,0x09,0x00,0x2d,
-  0xc0,0x00,0x03,0x00,0x2d,0xb0,0x00,0x01,0x09,0x00,0x2d,0xc4,0x00,0x03,0x00,0x2d,
-  0xc0,0x00,0x01,0x09,0x00,0x2d,0xc8,0x00,0x03,0x00,0x2d,0xc4,0x00,0x01,0x09,0x00,
-  0x2d,0xcc,0x00,0x03,0x00,0x2d,0xc8,0x00,0x01,0x09,0x00,0x2d,0xd0,0x00,0x03,0x00,
-  0x2d,0xcc,0x00,0x01,0x09,0x00,0x2e,0x00,0x00,0x03,0x00,0x2d,0xd0,0x00,0x01,0x09,
-  0x00,0x2e,0x04,0x00,0x03,0x00,0x2e,0x00,0x00,0x01,0x09,0x00,0x2e,0x08,0x00,0x03,
-  0x00,0x2e,0x04,0x00,0x01,0x09,0x00,0x2e,0x0c,0x00,0x03,0x00,0x2e,0x08,0x00,0x01,
-  0x09,0x00,0x2e,0x10,0x00,0x03,0x00,0x2e,0x0c,0x00,0x01,0x09,0x00,0x2e,0x20,0x00,
-  0x03,0x00,0x2e,0x10,0x00,0x01,0x09,0x00,0x2e,0x24,0x00,0x03,0x00,0x2e,0x20,0x00,
-  0x01,0x09,0x00,0x2e,0x28,0x00,0x03,0x00,0x2e,0x24,0x00,0x01,0x09,0x00,0x2e,0x2c,
-  0x00,0x03,0x00,0x2e,0x28,0x00,0x01,0x09,0x00,0x2e,0x30,0x00,0x03,0x00,0x2e,0x2c,
-  0x00,0x01,0x09,0x00,0x2e,0x40,0x00,0x03,0x00,0x2e,0x30,0x00,0x01,0x09,0x00,0x2e,
-  0x44,0x00,0x03,0x00,0x2e,0x40,0x00,0x01,0x09,0x00,0x2e,0x48,0x00,0x03,0x00,0x2e,
-  0x44,0x00,0x01,0x09,0x00,0x2e,0x4c,0x00,0x03,0x00,0x2e,0x48,0x00,0x01,0x09,0x00,
-  0x2e,0x50,0x00,0x03,0x00,0x2e,0x4c,0x00,0x01,0x09,0x00,0x2e,0x80,0x00,0x03,0x00,
-  0x2e,0x50,0x00,0x01,0x09,0x00,0x2e,0x84,0x00,0x03,0x00,0x2e,0x80,0x00,0x01,0x09,
-  0x00,0x2e,0x88,0x00,0x03,0x00,0x2e,0x84,0x00,0x01,0x09,0x00,0x2e,0x8c,0x00,0x03,
-  0x00,0x2e,0x88,0x00,0x01,0x09,0x00,0x2e,0x90,0x00,0x03,0x00,0x2e,0x8c,0x00,0x01,
-  0x09,0x00,0x2e,0xa0,0x00,0x03,0x00,0x2e,0x90,0x00,0x01,0x09,0x00,0x2e,0xa4,0x00,
-  0x03,0x00,0x2e,0xa0,0x00,0x01,0x09,0x00,0x2e,0xa8,0x00,0x03,0x00,0x2e,0xa4,0x00,
-  0x01,0x09,0x00,0x2e,0xac,0x00,0x03,0x00,0x2e,0xa8,0x00,0x01,0x09,0x00,0x2e,0xb0,
-  0x00,0x03,0x00,0x2e,0xac,0x00,0x01,0x09,0x00,0x2e,0xc0,0x00,0x03,0x00,0x2e,0xb0,
-  0x00,0x01,0x09,0x00,0x2e,0xc4,0x00,0x03,0x00,0x2e,0xc0,0x00,0x01,0x09,0x00,0x2e,
-  0xc8,0x00,0x03,0x00,0x2e,0xc4,0x00,0x01,0x09,0x00,0x2e,0xcc,0x00,0x03,0x00,0x2e,
-  0xc8,0x00,0x01,0x09,0x00,0x2e,0xd0,0x00,0x03,0x00,0x2e,0xcc,0x00,0x01,0x09,0x00,
-  0x2f,0x00,0x00,0x03,0x00,0x2e,0xd0,0x00,0x01,0x09,0x00,0x2f,0x04,0x00,0x03,0x00,
-  0x2f,0x00,0x00,0x01,0x09,0x00,0x2f,0x08,0x00,0x03,0x00,0x2f,0x04,0x00,0x01,0x09,
-  0x00,0x2f,0x0c,0x00,0x03,0x00,0x2f,0x08,0x00,0x01,0x09,0x00,0x2f,0x10,0x00,0x03,
-  0x00,0x2f,0x0c,0x00,0x01,0x09,0x00,0x2f,0x20,0x00,0x03,0x00,0x2f,0x10,0x00,0x01,
-  0x09,0x00,0x2f,0x24,0x00,0x03,0x00,0x2f,0x20,0x00,0x01,0x09,0x00,0x2f,0x28,0x00,
-  0x03,0x00,0x2f,0x24,0x00,0x01,0x09,0x00,0x2f,0x2c,0x00,0x03,0x00,0x2f,0x28,0x00,
-  0x01,0x09,0x00,0x2f,0x30,0x00,0x03,0x00,0x2f,0x2c,0x00,0x01,0x09,0x00,0x2f,0x40,
-  0x00,0x03,0x00,0x2f,0x30,0x00,0x01,0x09,0x00,0x2f,0x44,0x00,0x03,0x00,0x2f,0x40,
-  0x00,0x01,0x09,0x00,0x2f,0x48,0x00,0x03,0x00,0x2f,0x44,0x00,0x01,0x09,0x00,0x2f,
-  0x4c,0x00,0x03,0x00,0x2f,0x48,0x00,0x01,0x09,0x00,0x2f,0x50,0x00,0x03,0x00,0x2f,
-  0x4c,0x00,0x01,0x09,0x00,0x2f,0x80,0x00,0x03,0x00,0x2f,0x50,0x00,0x01,0x09,0x00,
-  0x2f,0x84,0x00,0x03,0x00,0x2f,0x80,0x00,0x01,0x09,0x00,0x2f,0x88,0x00,0x03,0x00,
-  0x2f,0x84,0x00,0x01,0x09,0x00,0x2f,0x8c,0x00,0x03,0x00,0x2f,0x88,0x00,0x01,0x09,
-  0x00,0x2f,0x90,0x00,0x03,0x00,0x2f,0x8c,0x00,0x01,0x09,0x00,0x2f,0xa0,0x00,0x03,
-  0x00,0x2f,0x90,0x00,0x01,0x09,0x00,0x2f,0xa4,0x00,0x03,0x00,0x2f,0xa0,0x00,0x01,
-  0x09,0x00,0x2f,0xa8,0x00,0x03,0x00,0x2f,0xa4,0x00,0x01,0x09,0x00,0x2f,0xac,0x00,
-  0x03,0x00,0x2f,0xa8,0x00,0x01,0x09,0x00,0x2f,0xb0,0x00,0x03,0x00,0x2f,0xac,0x00,
-  0x01,0x09,0x00,0x2f,0xc0,0x00,0x03,0x00,0x2f,0xb0,0x00,0x01,0x09,0x00,0x2f,0xc4,
-  0x00,0x03,0x00,0x2f,0xc0,0x00,0x01,0x09,0x00,0x2f,0xc8,0x00,0x03,0x00,0x2f,0xc4,
-  0x00,0x01,0x09,0x00,0x2f,0xcc,0x00,0x03,0x00,0x2f,0xc8,0x00,0x01,0x09,0x00,0x2f,
-  0xd0,0x00,0x03,0x00,0x2f,0xcc,0x00,0x01,0x09,0x00,0x30,0x00,0x00,0x03,0x00,0x2f,
-  0xd0,0x00,0x01,0x09,0x00,0x30,0x04,0x00,0x03,0x00,0x30,0x00,0x00,0x01,0x09,0x00,
-  0x30,0x08,0x00,0x03,0x00,0x30,0x04,0x00,0x01,0x09,0x00,0x30,0x0c,0x00,0x03,0x00,
-  0x30,0x08,0x00,0x01,0x09,0x00,0x30,0x10,0x00,0x03,0x00,0x30,0x0c,0x00,0x01,0x09,
-  0x00,0x30,0x20,0x00,0x03,0x00,0x30,0x10,0x00,0x01,0x09,0x00,0x30,0x24,0x00,0x03,
-  0x00,0x30,0x20,0x00,0x01,0x09,0x00,0x30,0x28,0x00,0x03,0x00,0x30,0x24,0x00,0x01,
-  0x09,0x00,0x30,0x2c,0x00,0x03,0x00,0x30,0x28,0x00,0x01,0x09,0x00,0x30,0x30,0x00,
-  0x03,0x00,0x30,0x2c,0x00,0x01,0x09,0x00,0x30,0x40,0x00,0x03,0x00,0x30,0x30,0x00,
-  0x01,0x09,0x00,0x30,0x44,0x00,0x03,0x00,0x30,0x40,0x00,0x01,0x09,0x00,0x30,0x48,
-  0x00,0x03,0x00,0x30,0x44,0x00,0x01,0x09,0x00,0x30,0x4c,0x00,0x03,0x00,0x30,0x48,
-  0x00,0x01,0x09,0x00,0x30,0x50,0x00,0x03,0x00,0x30,0x4c,0x00,0x01,0x09,0x00,0x30,
-  0x80,0x00,0x03,0x00,0x30,0x50,0x00,0x01,0x09,0x00,0x30,0x84,0x00,0x03,0x00,0x30,
-  0x80,0x00,0x01,0x09,0x00,0x30,0x88,0x00,0x03,0x00,0x30,0x84,0x00,0x01,0x09,0x00,
-  0x30,0x8c,0x00,0x03,0x00,0x30,0x88,0x00,0x01,0x09,0x00,0x30,0x90,0x00,0x03,0x00,
-  0x30,0x8c,0x00,0x01,0x09,0x00,0x30,0xa0,0x00,0x03,0x00,0x30,0x90,0x00,0x01,0x09,
-  0x00,0x30,0xa4,0x00,0x03,0x00,0x30,0xa0,0x00,0x01,0x09,0x00,0x30,0xa8,0x00,0x03,
-  0x00,0x30,0xa4,0x00,0x01,0x09,0x00,0x30,0xac,0x00,0x03,0x00,0x30,0xa8,0x00,0x01,
-  0x09,0x00,0x30,0xb0,0x00,0x03,0x00,0x30,0xac,0x00,0x01,0x09,0x00,0x30,0xc0,0x00,
-  0x03,0x00,0x30,0xb0,0x00,0x01,0x09,0x00,0x30,0xc4,0x00,0x03,0x00,0x30,0xc0,0x00,
-  0x01,0x09,0x00,0x30,0xc8,0x00,0x03,0x00,0x30,0xc4,0x00,0x01,0x09,0x00,0x30,0xcc,
-  0x00,0x03,0x00,0x30,0xc8,0x00,0x01,0x09,0x00,0x30,0xd0,0x00,0x03,0x00,0x30,0xcc,
-  0x00,0x01,0x09,0x00,0x31,0x00,0x00,0x03,0x00,0x30,0xd0,0x00,0x01,0x09,0x00,0x31,
-  0x04,0x00,0x03,0x00,0x31,0x00,0x00,0x01,0x09,0x00,0x31,0x08,0x00,0x03,0x00,0x31,
-  0x04,0x00,0x01,0x09,0x00,0x31,0x0c,0x00,0x03,0x00,0x31,0x08,0x00,0x01,0x09,0x00,
-  0x31,0x10,0x00,0x03,0x00,0x31,0x0c,0x00,0x01,0x09,0x00,0x31,0x20,0x00,0x03,0x00,
-  0x31,0x10,0x00,0x01,0x09,0x00,0x31,0x24,0x00,0x03,0x00,0x31,0x20,0x00,0x01,0x09,
-  0x00,0x31,0x28,0x00,0x03,0x00,0x31,0x24,0x00,0x01,0x09,0x00,0x31,0x2c,0x00,0x03,
-  0x00,0x31,0x28,0x00,0x01,0x09,0x00,0x31,0x30,0x00,0x03,0x00,0x31,0x2c,0x00,0x01,
-  0x09,0x00,0x31,0x40,0x00,0x03,0x00,0x31,0x30,0x00,0x01,0x09,0x00,0x31,0x44,0x00,
-  0x03,0x00,0x31,0x40,0x00,0x01,0x09,0x00,0x31,0x48,0x00,0x03,0x00,0x31,0x44,0x00,
-  0x01,0x09,0x00,0x31,0x4c,0x00,0x03,0x00,0x31,0x48,0x00,0x01,0x09,0x00,0x31,0x50,
-  0x00,0x03,0x00,0x31,0x4c,0x00,0x01,0x09,0x00,0x31,0x80,0x00,0x03,0x00,0x31,0x50,
-  0x00,0x01,0x09,0x00,0x31,0x84,0x00,0x03,0x00,0x31,0x80,0x00,0x01,0x09,0x00,0x31,
-  0x88,0x00,0x03,0x00,0x31,0x84,0x00,0x01,0x09,0x00,0x31,0x8c,0x00,0x03,0x00,0x31,
-  0x88,0x00,0x01,0x09,0x00,0x31,0x90,0x00,0x03,0x00,0x31,0x8c,0x00,0x01,0x09,0x00,
-  0x31,0xa0,0x40,0x03,0x00,0x31,0x90,0x00,0x01,0x09,0x00,0x31,0xa4,0x00,0x03,0x00,
-  0x31,0xa0,0x40,0x01,0x09,0x00,0x31,0xa8,0x00,0x03,0x00,0x31,0xa4,0x00,0x01,0x09,
-  0x00,0x31,0xac,0x00,0x03,0x00,0x31,0xa8,0x00,0x01,0x09,0x00,0x31,0xb0,0x00,0x03,
-  0x00,0x31,0xac,0x00,0x01,0x09,0x00,0x31,0xc0,0x00,0x03,0x00,0x31,0xb0,0x00,0x01,
-  0x09,0x00,0x31,0xc4,0x00,0x03,0x00,0x31,0xc0,0x00,0x01,0x09,0x00,0x31,0xc8,0x00,
-  0x03,0x00,0x31,0xc4,0x00,0x01,0x09,0x00,0x31,0xcc,0x00,0x03,0x00,0x31,0xc8,0x00,
-  0x01,0x09,0x00,0x31,0xd0,0x00,0x03,0x00,0x31,0xcc,0x00,0x01,0x09,0x00,0x32,0x00,
-  0x00,0x03,0x00,0x31,0xd0,0x00,0x01,0x09,0x00,0x32,0x04,0x00,0x03,0x00,0x32,0x00,
-  0x00,0x01,0x09,0x00,0x32,0x08,0x00,0x03,0x00,0x32,0x04,0x00,0x01,0x09,0x00,0x32,
-  0x0c,0x00,0x03,0x00,0x32,0x08,0x00,0x01,0x09,0x00,0x32,0x10,0x00,0x03,0x00,0x32,
-  0x0c,0x00,0x01,0x09,0x00,0x32,0x20,0x00,0x03,0x00,0x32,0x10,0x00,0x01,0x09,0x00,
-  0x32,0x24,0x00,0x03,0x00,0x32,0x20,0x00,0x01,0x09,0x00,0x32,0x28,0x00,0x03,0x00,
-  0x32,0x24,0x00,0x01,0x09,0x00,0x32,0x2c,0x00,0x03,0x00,0x32,0x28,0x00,0x01,0x09,
-  0x00,0x32,0x30,0x00,0x03,0x00,0x32,0x2c,0x00,0x01,0x09,0x00,0x32,0x40,0x00,0x03,
-  0x00,0x32,0x30,0x00,0x01,0x09,0x00,0x32,0x44,0x00,0x03,0x00,0x32,0x40,0x00,0x01,
-  0x09,0x00,0x32,0x48,0x00,0x03,0x00,0x32,0x44,0x00,0x01,0x09,0x00,0x32,0x4c,0x00,
-  0x03,0x00,0x32,0x48,0x00,0x01,0x09,0x00,0x32,0x50,0x00,0x03,0x00,0x32,0x4c,0x00,
-  0x01,0x09,0x00,0x32,0x80,0x00,0x03,0x00,0x32,0x50,0x00,0x01,0x09,0x00,0x32,0x84,
-  0x00,0x03,0x00,0x32,0x80,0x00,0x01,0x09,0x00,0x32,0x88,0x00,0x03,0x00,0x32,0x84,
-  0x00,0x01,0x09,0x00,0x32,0x8c,0x00,0x03,0x00,0x32,0x88,0x00,0x01,0x09,0x00,0x32,
-  0x90,0x00,0x03,0x00,0x32,0x8c,0x00,0x01,0x09,0x00,0x32,0xa0,0x00,0x23,0x00,0x32,
-  0x90,0x00,0x01,0x09,0x00,0x32,0xa4,0x00,0x03,0x00,0x32,0xa0,0x00,0x21,0x09,0x00,
-  0x32,0xa8,0x00,0x03,0x00,0x32,0xa4,0x00,0x01,0x09,0x00,0x32,0xac,0x00,0x03,0x00,
-  0x32,0xa8,0x00,0x01,0x09,0x00,0x32,0xb0,0x00,0x03,0x00,0x32,0xac,0x00,0x01,0x09,
-  0x00,0x32,0xc0,0x00,0x03,0x00,0x32,0xb0,0x00,0x01,0x09,0x00,0x32,0xc4,0x00,0x03,
-  0x00,0x32,0xc0,0x00,0x01,0x09,0x00,0x32,0xc8,0x00,0x03,0x00,0x32,0xc4,0x00,0x01,
-  0x09,0x00,0x32,0xcc,0x00,0x03,0x00,0x32,0xc8,0x00,0x01,0x09,0x00,0x32,0xd0,0x00,
-  0x03,0x00,0x32,0xcc,0x00,0x01,0x09,0x00,0x33,0x00,0x00,0x03,0x00,0x32,0xd0,0x00,
-  0x01,0x09,0x00,0x33,0x04,0x00,0x03,0x00,0x33,0x00,0x00,0x01,0x09,0x00,0x33,0x08,
-  0x00,0x03,0x00,0x33,0x04,0x00,0x01,0x09,0x00,0x33,0x0c,0x00,0x03,0x00,0x33,0x08,
-  0x00,0x01,0x09,0x00,0x33,0x10,0x00,0x03,0x00,0x33,0x0c,0x00,0x01,0x09,0x00,0x33,
-  0x20,0x00,0x03,0x00,0x33,0x10,0x00,0x01,0x09,0x00,0x33,0x24,0x00,0x03,0x00,0x33,
-  0x20,0x00,0x01,0x09,0x00,0x33,0x28,0x00,0x03,0x00,0x33,0x24,0x00,0x01,0x09,0x00,
-  0x33,0x2c,0x00,0x03,0x00,0x33,0x28,0x00,0x01,0x09,0x00,0x33,0x30,0x00,0x03,0x00,
-  0x33,0x2c,0x00,0x01,0x09,0x00,0x33,0x40,0x00,0x03,0x00,0x33,0x30,0x00,0x01,0x09,
-  0x00,0x33,0x44,0x00,0x03,0x00,0x33,0x40,0x00,0x01,0x09,0x00,0x33,0x48,0x00,0x03,
-  0x00,0x33,0x44,0x00,0x01,0x09,0x00,0x33,0x4c,0x00,0x03,0x00,0x33,0x48,0x00,0x01,
-  0x09,0x00,0x33,0x50,0x00,0x03,0x00,0x33,0x4c,0x00,0x01,0x09,0x00,0x33,0x80,0x00,
-  0x03,0x00,0x33,0x50,0x00,0x01,0x09,0x00,0x33,0x84,0x00,0x03,0x00,0x33,0x80,0x00,
-  0x01,0x09,0x00,0x33,0x88,0x00,0x03,0x00,0x33,0x84,0x00,0x01,0x09,0x00,0x33,0x8c,
-  0x00,0x03,0x00,0x33,0x88,0x00,0x01,0x09,0x00,0x33,0x90,0x00,0x03,0x00,0x33,0x8c,
-  0x00,0x01,0x09,0x00,0x33,0xa0,0x00,0x03,0x00,0x33,0x90,0x00,0x01,0x09,0x00,0x33,
-  0xa4,0x00,0x03,0x00,0x33,0xa0,0x00,0x01,0x09,0x00,0x33,0xa8,0x00,0x03,0x00,0x33,
-  0xa4,0x00,0x01,0x09,0x00,0x33,0xac,0x00,0x03,0x00,0x33,0xa8,0x00,0x01,0x09,0x00,
-  0x33,0xb0,0x00,0x03,0x00,0x33,0xac,0x00,0x01,0x09,0x00,0x33,0xc0,0x00,0x03,0x00,
-  0x33,0xb0,0x00,0x01,0x09,0x00,0x33,0xc4,0x00,0x03,0x00,0x33,0xc0,0x00,0x01,0x09,
-  0x00,0x33,0xc8,0x00,0x03,0x00,0x33,0xc4,0x00,0x01,0x09,0x00,0x33,0xcc,0x00,0x03,
-  0x00,0x33,0xc8,0x00,0x01,0x09,0x00,0x33,0xd0,0x00,0x03,0x00,0x33,0xcc,0x00,0x01,
-  0x09,0x00,0x34,0x00,0x00,0x03,0x00,0x33,0xd0,0x00,0x01,0x09,0x00,0x34,0x04,0x00,
-  0x03,0x00,0x34,0x00,0x00,0x01,0x09,0x00,0x34,0x08,0x00,0x03,0x00,0x34,0x04,0x00,
-  0x01,0x09,0x00,0x34,0x0c,0x00,0x03,0x00,0x34,0x08,0x00,0x01,0x09,0x00,0x34,0x10,
-  0x00,0x03,0x00,0x34,0x0c,0x00,0x01,0x09,0x00,0x34,0x20,0x00,0x03,0x00,0x34,0x10,
-  0x00,0x01,0x09,0x00,0x34,0x24,0x00,0x03,0x00,0x34,0x20,0x00,0x01,0x09,0x00,0x34,
-  0x28,0x00,0x03,0x00,0x34,0x24,0x00,0x01,0x09,0x00,0x34,0x2c,0x00,0x03,0x00,0x34,
-  0x28,0x00,0x01,0x09,0x00,0x34,0x30,0x00,0x03,0x00,0x34,0x2c,0x00,0x01,0x09,0x00,
-  0x34,0x40,0x00,0x03,0x00,0x34,0x30,0x00,0x01,0x09,0x00,0x34,0x44,0x00,0x03,0x00,
-  0x34,0x40,0x00,0x01,0x09,0x00,0x34,0x48,0x00,0x03,0x00,0x34,0x44,0x00,0x01,0x09,
-  0x00,0x34,0x4c,0x00,0x03,0x00,0x34,0x48,0x00,0x01,0x09,0x00,0x34,0x50,0x00,0x03,
-  0x00,0x34,0x4c,0x00,0x01,0x09,0x00,0x34,0x80,0x00,0x03,0x00,0x34,0x50,0x00,0x01,
-  0x09,0x00,0x34,0x84,0x00,0x03,0x00,0x34,0x80,0x00,0x01,0x09,0x00,0x34,0x88,0x00,
-  0x03,0x00,0x34,0x84,0x00,0x01,0x09,0x00,0x34,0x8c,0x00,0x03,0x00,0x34,0x88,0x00,
-  0x01,0x09,0x00,0x34,0x90,0x00,0x03,0x00,0x34,0x8c,0x00,0x01,0x09,0x00,0x34,0xa0,
-  0x00,0x03,0x00,0x34,0x90,0x00,0x01,0x09,0x00,0x34,0xa4,0x00,0x03,0x00,0x34,0xa0,
-  0x00,0x01,0x09,0x00,0x34,0xa8,0x00,0x03,0x00,0x34,0xa4,0x00,0x01,0x09,0x00,0x34,
-  0xac,0x00,0x03,0x00,0x34,0xa8,0x00,0x01,0x09,0x00,0x34,0xb0,0x00,0x03,0x00,0x34,
-  0xac,0x00,0x01,0x09,0x00,0x34,0xc0,0x00,0x03,0x00,0x34,0xb0,0x00,0x01,0x09,0x00,
-  0x34,0xc4,0x00,0x03,0x00,0x34,0xc0,0x00,0x01,0x09,0x00,0x34,0xc8,0x00,0x03,0x00,
-  0x34,0xc4,0x00,0x01,0x09,0x00,0x34,0xcc,0x00,0x03,0x00,0x34,0xc8,0x00,0x01,0x09,
-  0x00,0x34,0xd0,0x00,0x03,0x00,0x34,0xcc,0x00,0x01,0x09,0x00,0x35,0x00,0x00,0x03,
-  0x00,0x34,0xd0,0x00,0x01,0x09,0x00,0x35,0x04,0x00,0x03,0x00,0x35,0x00,0x00,0x01,
-  0x09,0x00,0x35,0x08,0x00,0x03,0x00,0x35,0x04,0x00,0x01,0x09,0x00,0x35,0x0c,0x00,
-  0x03,0x00,0x35,0x08,0x00,0x01,0x09,0x00,0x35,0x10,0x00,0x03,0x00,0x35,0x0c,0x00,
-  0x01,0x09,0x00,0x35,0x20,0x00,0x03,0x00,0x35,0x10,0x00,0x01,0x09,0x00,0x35,0x24,
-  0x00,0x03,0x00,0x35,0x20,0x00,0x01,0x09,0x00,0x35,0x28,0x00,0x03,0x00,0x35,0x24,
-  0x00,0x01,0x09,0x00,0x35,0x2c,0x00,0x03,0x00,0x35,0x28,0x00,0x01,0x09,0x00,0x35,
-  0x30,0x00,0x03,0x00,0x35,0x2c,0x00,0x01,0x09,0x00,0x35,0x40,0x00,0x03,0x00,0x35,
-  0x30,0x00,0x01,0x09,0x00,0x35,0x44,0x00,0x03,0x00,0x35,0x40,0x00,0x01,0x09,0x00,
-  0x35,0x48,0x00,0x03,0x00,0x35,0x44,0x00,0x01,0x09,0x00,0x35,0x4c,0x00,0x03,0x00,
-  0x35,0x48,0x00,0x01,0x09,0x00,0x35,0x50,0x00,0x03,0x00,0x35,0x4c,0x00,0x01,0x09,
-  0x00,0x35,0x80,0x00,0x03,0x00,0x35,0x50,0x00,0x01,0x09,0x00,0x35,0x84,0x00,0x03,
-  0x00,0x35,0x80,0x00,0x01,0x09,0x00,0x35,0x88,0x00,0x03,0x00,0x35,0x84,0x00,0x01,
-  0x09,0x00,0x35,0x8c,0x00,0x03,0x00,0x35,0x88,0x00,0x01,0x09,0x00,0x35,0x90,0x00,
-  0x03,0x00,0x35,0x8c,0x00,0x01,0x09,0x00,0x35,0xa0,0x00,0x03,0x00,0x35,0x90,0x00,
-  0x01,0x09,0x00,0x35,0xa4,0x00,0x03,0x00,0x35,0xa0,0x00,0x01,0x09,0x00,0x35,0xa8,
-  0x00,0x03,0x00,0x35,0xa4,0x00,0x01,0x09,0x00,0x35,0xac,0x00,0x03,0x00,0x35,0xa8,
-  0x00,0x01,0x09,0x00,0x35,0xb0,0x00,0x03,0x00,0x35,0xac,0x00,0x01,0x09,0x00,0x35,
-  0xc0,0x00,0x03,0x00,0x35,0xb0,0x00,0x01,0x09,0x00,0x35,0xc4,0x00,0x03,0x00,0x35,
-  0xc0,0x00,0x01,0x09,0x00,0x35,0xc8,0x00,0x03,0x00,0x35,0xc4,0x00,0x01,0x09,0x00,
-  0x35,0xcc,0x00,0x03,0x00,0x35,0xc8,0x00,0x01,0x09,0x00,0x35,0xd0,0x00,0x03,0x00,
-  0x35,0xcc,0x00,0x01,0x09,0x00,0x35,0xd0,0x00,0x03,0x00,0x35,0xd0,0x00,0x01,0x04,
-  0x00,0x00,0x00,0x00,0x02,0x08,0xff,0x04,0x00,0x00,0x00,0x64,0x02,0x08,0xf0,0x04,
-  0x00,0x00,0x00,0x00,0x02,0x08,0xff,0x07,0x00,0x07,0x20,0x12,0x00,0x12,0x01,0x04,
-  0x00,0x00,0x00,0x00,0x02,0x08,0xff,0x08,0x00,0x00,0x00,0x01,0x01,0x00,0x09,0x00,
-  0x00,0x00,
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
deleted file mode 100644
index df8a08ddef..0000000000
--- a/board/esd/pmc405/pmc405.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2005
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-/* fpga configuration data - not compressed, generated by bin2c */
-const unsigned char fpgadata[] =
-{
-#include "fpgadata.c"
-};
-int filesize = sizeof(fpgadata);
-
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(uicer, 0x00000000);       /* disable all ints */
-	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
-	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
-	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc (epcr, 0xa8400000);
-
-	/*
-	 * Setup GPIO pins
-	 */
-
-	mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \
-					CFG_FPGA_DONE | \
-					CFG_XEREADY | \
-					CFG_NONMONARCH | \
-					CFG_REV1_2) << 5));
-
-	if (!(in32(GPIO0_IR) & CFG_REV1_2)) {
-		/* rev 1.2 boards */
-		mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \
-						CFG_SELF_RST) << 5));
-	}
-
-	out32(GPIO0_OR, 0);
-	out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */
-
-	/* - check if rev1_2 is low, then:
-	 * - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST#
-	 */
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-
-int misc_init_r (void)
-{
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */
-	return (0);
-}
-
-ushort pmc405_pci_subsys_deviceid(void)
-{
-	ulong val;
-	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
-			return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
-		}
-		return CFG_PCI_SUBSYS_DEVICEID_MONARCH;
-	}
-	return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	ulong val;
-
-	char str[64];
-	int i = getenv_r ("serial#", str, sizeof(str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming PMC405");
-	} else {
-		puts(str);
-	}
-
-	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
-		puts(" rev1.2 (");
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
-			puts("non-");
-		}
-		puts("monarch)");
-	} else {
-		puts(" <=rev1.1");
-	}
-
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-long int initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-
-/* ------------------------------------------------------------------------- */
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}
-
-
-int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	ulong addr;
-	volatile uchar *ptr;
-	volatile uchar val;
-	int i;
-
-	addr = simple_strtol (argv[1], NULL, 16) + 0x16;
-
-	i = 0;
-	for (;;) {
-		ptr = (uchar *)addr;
-		for (i=0; i<8; i++) {
-			*ptr = i;
-			val = *ptr;
-
-			if (val != i) {
-				printf("ERROR: addr=%p write=0x%02X, read=0x%02X\n", ptr, i, val);
-				return 0;
-			}
-
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			ptr++;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	cantest,	3,	1,	do_cantest,
-	"cantest - Test CAN controller",
-	NULL
-	);
diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds
deleted file mode 100644
index e84d69ebb7..0000000000
--- a/board/esd/pmc405/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile
deleted file mode 100644
index 18b735061e..0000000000
--- a/board/etin/kvme080/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o multiverse.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/etin/kvme080/config.mk b/board/etin/kvme080/config.mk
deleted file mode 100644
index 45abdc0e83..0000000000
--- a/board/etin/kvme080/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2005
-# Sangmoon, Etin Systems, dogoil@etinsys.com.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# KVME080 board
-#
-
-TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/etin/kvme080/kvme080.c b/board/etin/kvme080/kvme080.c
deleted file mode 100644
index de62fa0973..0000000000
--- a/board/etin/kvme080/kvme080.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2005
- * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
-	puts ("Board: KVME080\n");
-	return 0;
-}
-
-unsigned long setdram(int m, int row, int col, int bank)
-{
-	int i;
-	unsigned long start, end;
-	uint32_t mccr1;
-	uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
-	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
-	uint8_t mber = 0;
-
-	CONFIG_READ_WORD(MCCR1, mccr1);
-	mccr1 &= 0xffff0000;
-
-	start = CFG_SDRAM_BASE;
-	end = start + (1 << (col + row + 3) ) * bank - 1;
-
-	for (i = 0; i < m; i++) {
-		mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
-		if (i < 4) {
-			msar1  |= ((start >> 20) & 0xff) << i * 8;
-			emsar1 |= ((start >> 28) & 0xff) << i * 8;
-			mear1  |= ((end >> 20) & 0xff) << i * 8;
-			emear1 |= ((end >> 28) & 0xff) << i * 8;
-		} else {
-			msar2  |= ((start >> 20) & 0xff) << (i-4) * 8;
-			emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
-			mear2  |= ((end >> 20) & 0xff) << (i-4) * 8;
-			emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
-		}
-		mber |= 1 << i;
-		start += (1 << (col + row + 3) ) * bank;
-		end += (1 << (col + row + 3) ) * bank;
-	}
-	for (; i < 8; i++) {
-		if (i < 4) {
-			msar1  |= 0xff << i * 8;
-			emsar1 |= 0x30 << i * 8;
-			mear1  |= 0xff << i * 8;
-			emear1 |= 0x30 << i * 8;
-		} else {
-			msar2  |= 0xff << (i-4) * 8;
-			emsar2 |= 0x30 << (i-4) * 8;
-			mear2  |= 0xff << (i-4) * 8;
-			emear2 |= 0x30 << (i-4) * 8;
-		}
-	}
-
-	CONFIG_WRITE_WORD(MCCR1, mccr1);
-	CONFIG_WRITE_WORD(MSAR1, msar1);
-	CONFIG_WRITE_WORD(EMSAR1, emsar1);
-	CONFIG_WRITE_WORD(MEAR1, mear1);
-	CONFIG_WRITE_WORD(EMEAR1, emear1);
-	CONFIG_WRITE_WORD(MSAR2, msar2);
-	CONFIG_WRITE_WORD(EMSAR2, emsar2);
-	CONFIG_WRITE_WORD(MEAR2, mear2);
-	CONFIG_WRITE_WORD(EMEAR2, emear2);
-	CONFIG_WRITE_BYTE(MBER, mber);
-
-	return (1 << (col + row + 3) ) * bank * m;
-}
-
-long int initdram(int board_type)
-{
-	unsigned int msr;
-	long int size = 0;
-
-	msr = mfmsr();
-	mtmsr(msr & ~(MSR_IR | MSR_DR));
-	mtspr(IBAT2L, CFG_IBAT0L + 0x10000000);
-	mtspr(IBAT2U, CFG_IBAT0U + 0x10000000);
-	mtspr(DBAT2L, CFG_DBAT0L + 0x10000000);
-	mtspr(DBAT2U, CFG_DBAT0U + 0x10000000);
-	mtmsr(msr);
-
-	if (setdram(2,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x20000000))
-		size = 0x20000000;	/* 512MB */
-	else if (setdram(1,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
-		size = 0x10000000;	/* 256MB */
-	else if (setdram(2,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
-		size = 0x10000000;	/* 256MB */
-	else if (setdram(1,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
-		size = 0x08000000;	/* 128MB */
-	else if (setdram(2,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
-		size = 0x08000000;	/* 128MB */
-	else if (setdram(1,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x04000000))
-		size = 0x04000000;	/* 64MB */
-
-	msr = mfmsr();
-	mtmsr(msr & ~(MSR_IR | MSR_DR));
-	mtspr(IBAT2L, CFG_IBAT2L);
-	mtspr(IBAT2U, CFG_IBAT2U);
-	mtspr(DBAT2L, CFG_DBAT2L);
-	mtspr(DBAT2U, CFG_DBAT2U);
-	mtmsr(msr);
-
-	return size;
-}
-
-struct pci_controller hose;
-
-void pci_init_board(void)
-{
-	pci_mpc824x_init(&hose);
-}
-
-int board_early_init_f(void)
-{
-	*(volatile unsigned char *)(0xff080120) = 0xfb;
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	unsigned int msr;
-
-	CONFIG_WRITE_WORD(ERCR1, 0x95ff8000);
-	CONFIG_WRITE_WORD(ERCR3, 0x0c00000e);
-	CONFIG_WRITE_WORD(ERCR4, 0x0800000e);
-
-	msr = mfmsr();
-	mtmsr(msr & ~(MSR_IR | MSR_DR));
-	mtspr(IBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
-	mtspr(IBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
-	mtspr(DBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
-	mtspr(DBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
-	mtmsr(msr);
-
-	return 0;
-}
-
-extern int multiverse_init(void);
-
-int misc_init_r(void)
-{
-	multiverse_init();
-	return 0;
-}
-
-void *nvram_read(void *dest, const long src, size_t count)
-{
-	volatile uchar *d = (volatile uchar*) dest;
-	volatile uchar *s = (volatile uchar*) src;
-	while(count--) {
-		*d++ = *s++;
-		asm volatile("sync");
-	}
-	return dest;
-}
-
-void nvram_write(long dest, const void *src, size_t count)
-{
-	volatile uchar *d = (volatile uchar*)dest;
-	volatile uchar *s = (volatile uchar*)src;
-	while(count--) {
-		*d++ = *s++;
-		asm volatile("sync");
-	}
-}
diff --git a/board/etin/kvme080/multiverse.c b/board/etin/kvme080/multiverse.c
deleted file mode 100644
index eb895817d5..0000000000
--- a/board/etin/kvme080/multiverse.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * multiverse.c
- *
- * VME driver for Multiverse
- *
- * Author : Sangmoon Kim
- *	    dogoil@etinsys.com
- *
- * Copyright 2005 ETIN SYSTEMS Co.,Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#include "multiverse.h"
-
-static unsigned long vme_asi_addr;
-static unsigned long vme_iack_addr;
-static unsigned long pci_reg_addr;
-static unsigned long vme_reg_addr;
-
-int multiv_reset(unsigned long base)
-{
-	writeb(0x09, base + VME_SLAVE32_AM);
-	writeb(0x39, base + VME_SLAVE24_AM);
-	writeb(0x29, base + VME_SLAVE16_AM);
-	writeb(0x2f, base + VME_SLAVE_REG_AM);
-	writeb((VME_A32_SLV_BUS >> 24) & 0xff, base + VME_SLAVE32_A);
-	writeb((VME_A24_SLV_BUS >> 16) & 0xff, base + VME_SLAVE24_A);
-	writeb((VME_A16_SLV_BUS >> 8 ) & 0xff, base + VME_SLAVE16_A);
-#ifdef A32_SLV_WINDOW
-	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
-		writeb(((~(VME_A32_SLV_SIZE-1)) >> 24) & 0xff,
-				base + VME_SLAVE32_MASK);
-		writeb(0x01, base + VME_SLAVE32_EN);
-	} else {
-		writeb(0xff, base + VME_SLAVE32_MASK);
-		writeb(0x00, base + VME_SLAVE32_EN);
-	}
-#else
-	writeb(0xff, base + VME_SLAVE32_MASK);
-	writeb(0x00, base + VME_SLAVE32_EN);
-#endif
-#ifdef A24_SLV_WINDOW
-	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
-		writeb(((~(VME_A24_SLV_SIZE-1)) >> 16) & 0xff,
-				base + VME_SLAVE24_MASK);
-		writeb(0x01, base + VME_SLAVE24_EN);
-	} else {
-		writeb(0xff, base + VME_SLAVE24_MASK);
-		writeb(0x00, base + VME_SLAVE24_EN);
-	}
-#else
-	writeb(0xff, base + VME_SLAVE24_MASK);
-	writeb(0x00, base + VME_SLAVE24_EN);
-#endif
-#ifdef A16_SLV_WINDOW
-	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
-		writeb(((~(VME_A16_SLV_SIZE-1)) >> 8) & 0xff,
-				base + VME_SLAVE16_MASK);
-		writeb(0x01, base + VME_SLAVE16_EN);
-	} else {
-		writeb(0xff, base + VME_SLAVE16_MASK);
-		writeb(0x00, base + VME_SLAVE16_EN);
-	}
-#else
-	writeb(0xff, base + VME_SLAVE16_MASK);
-	writeb(0x00, base + VME_SLAVE16_EN);
-#endif
-#ifdef REG_SLV_WINDOW
-	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
-		writeb(((~(VME_REG_SLV_SIZE-1)) >> 16) & 0xff,
-				base + VME_SLAVE_REG_MASK);
-		writeb(0x01, base + VME_SLAVE_REG_EN);
-	} else {
-		writeb(0xf8, base + VME_SLAVE_REG_MASK);
-	}
-#else
-	writeb(0xf8, base + VME_SLAVE_REG_MASK);
-#endif
-	writeb(0x09, base + VME_MASTER32_AM);
-	writeb(0x39, base + VME_MASTER24_AM);
-	writeb(0x29, base + VME_MASTER16_AM);
-	writeb(0x2f, base + VME_MASTER_REG_AM);
-	writel(0x00000000, base + VME_RMW_ADRS);
-	writeb(0x00, base + VME_IRQ);
-	writeb(0x00, base + VME_INT_EN);
-	writel(0x00000000, base + VME_IRQ1_REG);
-	writel(0x00000000, base + VME_IRQ2_REG);
-	writel(0x00000000, base + VME_IRQ3_REG);
-	writel(0x00000000, base + VME_IRQ4_REG);
-	writel(0x00000000, base + VME_IRQ5_REG);
-	writel(0x00000000, base + VME_IRQ6_REG);
-	writel(0x00000000, base + VME_IRQ7_REG);
-	return 0;
-}
-
-void multiv_auto_slot_id(unsigned long base)
-{
-	unsigned int vector;
-	int slot_id = 1;
-	if (readb(base + VME_CTRL) & VME_CTRL_SYSFAIL) {
-		*(volatile unsigned int*)(base + VME_IRQ2_REG) = 0xfe;
-		writeb(readb(base + VME_IRQ) | 0x04, base + VME_IRQ);
-		writeb(readb(base + VME_CTRL) & ~VME_CTRL_SYSFAIL,
-				base + VME_CTRL);
-		while (readb(base + VME_STATUS) & VME_STATUS_SYSFAIL);
-		if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
-			while (readb(base + VME_INT) & 0x04) {
-				vector = *(volatile unsigned int*)
-					(vme_iack_addr + VME_IACK2);
-				*(unsigned char*)(vme_asi_addr + 0x7ffff)
-					= (slot_id << 3) & 0xff;
-				slot_id ++;
-				if (slot_id > 31)
-					break;
-			}
-		}
-	}
-}
-
-int multiverse_init(void)
-{
-	int i;
-	pci_dev_t pdev;
-	unsigned int bar[6];
-
-	pdev = pci_find_device(0x1895, 0x0001, 0);
-
-	if (pdev == 0)
-		return -1;
-
-	for (i = 0; i < 6; i++)
-		pci_read_config_dword (pdev,
-				PCI_BASE_ADDRESS_0 + i * 4, &bar[i]);
-
-	pci_reg_addr = bar[0];
-	vme_reg_addr = bar[1] + 0x00F00000;
-	vme_iack_addr = bar[1] + 0x00200000;
-	vme_asi_addr = bar[3];
-
-	pci_write_config_dword (pdev, PCI_COMMAND,
-		PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	writel(0xFF000000, pci_reg_addr + P_TA1);
-	writel(0x04, pci_reg_addr + P_IMG_CTRL1);
-	writel(0xf0000000, pci_reg_addr + P_TA2);
-	writel(0x04, pci_reg_addr + P_IMG_CTRL2);
-	writel(0xF1000000, pci_reg_addr + P_TA3);
-	writel(0x04, pci_reg_addr + P_IMG_CTRL3);
-	writel(VME_A32_MSTR_BUS, pci_reg_addr + P_TA5);
-	writel(~(VME_A32_MSTR_SIZE-1), pci_reg_addr + P_AM5);
-	writel(0x04, pci_reg_addr + P_IMG_CTRL5);
-
-	writel(VME_A32_SLV_BUS, pci_reg_addr + W_BA1);
-	writel(~(VME_A32_SLV_SIZE-1), pci_reg_addr + W_AM1);
-	writel(VME_A32_SLV_LOCAL, pci_reg_addr + W_TA1);
-	writel(0x04, pci_reg_addr + W_IMG_CTRL1);
-
-	writel(0xF0000000, pci_reg_addr + W_BA2);
-	writel(0xFF000000, pci_reg_addr + W_AM2);
-	writel(VME_A24_SLV_LOCAL, pci_reg_addr + W_TA2);
-	writel(0x04, pci_reg_addr + W_IMG_CTRL2);
-
-	writel(0xFF000000, pci_reg_addr + W_BA3);
-	writel(0xFF000000, pci_reg_addr + W_AM3);
-	writel(VME_A16_SLV_LOCAL, pci_reg_addr + W_TA3);
-	writel(0x04, pci_reg_addr + W_IMG_CTRL3);
-
-	writel(0x00000001, pci_reg_addr + W_ERR_CS);
-	writel(0x00000001, pci_reg_addr + P_ERR_CS);
-
-	multiv_reset(vme_reg_addr);
-	writeb(readb(vme_reg_addr + VME_CTRL) | VME_CTRL_SHORT_D,
-		vme_reg_addr + VME_CTRL);
-
-	multiv_auto_slot_id(vme_reg_addr);
-
-	return 0;
-}
diff --git a/board/etin/kvme080/multiverse.h b/board/etin/kvme080/multiverse.h
deleted file mode 100644
index 776162d446..0000000000
--- a/board/etin/kvme080/multiverse.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * multiverse.h
- *
- * VME driver for Multiverse
- *
- * Author : Sangmoon Kim
- *	    dogoil@etinsys.com
- *
- * Copyright 2005 ETIN SYSTEMS Co.,Ltd.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MULTIVERSE_H__
-#define __MULTIVERSE_H__
-
-#define VME_A32_MSTR_BUS	0x90000000
-#define VME_A32_MSTR_SIZE	0x01000000
-
-#define VME_A32_SLV_SIZE	0x01000000
-
-#define VME_A32_SLV_BUS		0x90000000
-#define VME_A24_SLV_BUS		0x00000000
-#define VME_A16_SLV_BUS		0x00000000
-
-#define VME_A32_SLV_LOCAL	0x00000000
-#define VME_A24_SLV_LOCAL	0x00000000
-#define VME_A16_SLV_LOCAL	0x00000000
-
-#define A32_SLV_WINDOW
-#undef	A24_SLV_WINDOW
-#undef	A16_SLV_WINDOW
-#undef	REG_SLV_WINDOW
-
-/* PCI Registers */
-
-#define P_IMG_CTRL0		0x100
-#define P_BA0			0x104
-#define P_AM0			0x108
-#define P_TA0			0x10C
-#define P_IMG_CTRL1		0x110
-#define P_BA1			0x114
-#define P_AM1			0x118
-#define P_TA1			0x11C
-#define P_IMG_CTRL2		0x120
-#define P_BA2			0x124
-#define P_AM2			0x128
-#define P_TA2			0x12C
-#define P_IMG_CTRL3		0x130
-#define P_BA3			0x134
-#define P_AM3			0x138
-#define P_TA3			0x13C
-#define P_IMG_CTRL4		0x140
-#define P_BA4			0x144
-#define P_AM4			0x148
-#define P_TA4			0x14C
-#define P_IMG_CTRL5		0x150
-#define P_BA5			0x154
-#define P_AM5			0x158
-#define P_TA5			0x15C
-#define P_ERR_CS		0x160
-#define P_ERR_ADDR		0x164
-#define P_ERR_DATA		0x168
-
-#define WB_CONF_SPC_BAR		0x180
-#define W_IMG_CTRL1		0x184
-#define W_BA1			0x188
-#define W_AM1			0x18C
-#define W_TA1			0x190
-#define W_IMG_CTRL2		0x194
-#define W_BA2			0x198
-#define W_AM2			0x19C
-#define W_TA2			0x1A0
-#define W_IMG_CTRL3		0x1A4
-#define W_BA3			0x1A8
-#define W_AM3			0x1AC
-#define W_TA3			0x1B0
-#define W_IMG_CTRL4		0x1B4
-#define W_BA4			0x1B8
-#define W_AM4			0x1BC
-#define W_TA4			0x1C0
-#define W_IMG_CTRL5		0x1C4
-#define W_BA5			0x1C8
-#define W_AM5			0x1CC
-#define W_TA5			0x1D0
-#define W_ERR_CS		0x1D4
-#define W_ERR_ADDR		0x1D8
-#define W_ERR_DATA		0x1DC
-#define CNF_ADDR		0x1E0
-#define CNF_DATA		0x1E4
-#define INT_ACK			0x1E8
-#define ICR			0x1EC
-#define ISR			0x1F0
-
-/* VME registers */
-
-#define VME_SLAVE32_AM		0x03
-#define VME_SLAVE24_AM		0x02
-#define VME_SLAVE16_AM		0x01
-#define VME_SLAVE_REG_AM	0x00
-#define VME_SLAVE32_A		0x07
-#define VME_SLAVE24_A		0x06
-#define VME_SLAVE16_A		0x05
-#define VME_SLAVE_REG_A		0x04
-#define VME_SLAVE32_MASK	0x0B
-#define VME_SLAVE24_MASK	0x0A
-#define VME_SLAVE16_MASK	0x09
-#define VME_SLAVE_REG_MASK	0x08
-#define VME_SLAVE32_EN		0x0F
-#define VME_SLAVE24_EN		0x0E
-#define VME_SLAVE16_EN		0x0D
-#define VME_SLAVE_REG_EN	0x0C
-#define VME_MASTER32_AM		0x13
-#define VME_MASTER24_AM		0x12
-#define VME_MASTER16_AM		0x11
-#define VME_MASTER_REG_AM	0x10
-#define VME_RMW_ADRS		0x14
-#define VME_MBOX		0x18
-#define VME_STATUS		0x1E
-#define VME_CTRL		0x1C
-#define VME_IRQ			0x20
-#define VME_INT_EN		0x21
-#define VME_INT			0x22
-#define VME_IRQ1_REG		0x24
-#define VME_IRQ2_REG		0x28
-#define VME_IRQ3_REG		0x2C
-#define VME_IRQ4_REG		0x30
-#define VME_IRQ5_REG		0x34
-#define VME_IRQ6_REG		0x38
-#define VME_IRQ7_REG		0x3C
-
-/* VME control register */
-
-#define VME_CTRL_BRDRST		0x01
-#define VME_CTRL_SYSRST		0x02
-#define VME_CTRL_RMW		0x04
-#define VME_CTRL_SHORT_D	0x08
-#define VME_CTRL_SYSFAIL	0x10
-#define VME_CTRL_VOWN		0x20
-#define VME_CTRL_A16_REG_MODE	0x40
-
-/* VME status register */
-
-#define VME_STATUS_SYSCON	0x01
-#define VME_STATUS_SYSFAIL	0x02
-#define VME_STATUS_ACFAIL	0x04
-#define VME_STATUS_SYSRST	0x08
-#define VME_STATUS_VOWN		0x10
-
-/* Interrupt types */
-
-#define LVL1			0x0002
-#define LVL2			0x0004
-#define LVL3			0x0008
-#define LVL4			0x0010
-#define LVL5			0x0020
-#define LVL6			0x0040
-#define LVL7			0x0080
-#define MULTIVERSE_INTI_INT	0x0100
-#define MULTIVERSE_WB_INT	0x0200
-#define MULTIVERSE_PCI_INT	0x0400
-
-/* interrupt acknowledge */
-
-#define VME_IACK1		0x04
-#define VME_IACK2		0x08
-#define VME_IACK3		0x0c
-#define VME_IACK4		0x10
-#define VME_IACK5		0x14
-#define VME_IACK6		0x18
-#define VME_IACK7		0x1c
-
-#endif /* __MULTIVERSE_H__ */
diff --git a/board/etin/kvme080/u-boot.lds b/board/etin/kvme080/u-boot.lds
deleted file mode 100644
index dda3687635..0000000000
--- a/board/etin/kvme080/u-boot.lds
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2001-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc824x/start.o	(.text)
-    lib_ppc/board.o	(.text)
-    lib_ppc/ppcstring.o	(.text)
-
-	. = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o (.text)
-
-	*(.text)
-
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/hmi1001/Makefile b/board/hmi1001/Makefile
deleted file mode 100644
index ddfd2ef8af..0000000000
--- a/board/hmi1001/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/hmi1001/config.mk b/board/hmi1001/config.mk
deleted file mode 100644
index 51e8e84c5c..0000000000
--- a/board/hmi1001/config.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# INKA 4X0 board:
-#
-#	Valid values for TEXT_BASE are:
-#
-#	0xFFE00000   boot high
-#
-#	0x00100000   boot from RAM (for testing only)
-#
-
-ifndef TEXT_BASE
-## Standard: boot high
-TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
deleted file mode 100644
index 237e863165..0000000000
--- a/board/hmi1001/hmi1001.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <malloc.h>
-
-#ifndef CFG_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *	      is something else than 0x00000000.
- */
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
-			__builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CFG_RAMBOOT */
-
-/*	return dramsize + dramsize2; */
-	return dramsize;
-}
-
-int checkboard (void)
-{
-	puts ("Board: HMI1001\n");
-	return 0;
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[]		= "key_magic";
-static uchar kbd_command_prefix[]	= "key_cmd";
-
-#define S1_ROT	0xf0
-#define S2_Q	0x40
-#define S2_M	0x20
-
-struct kbd_data_t {
-	char s1;
-	char s2;
-};
-
-struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
-{
-	kbd_data->s1 = *((volatile uchar*)(CFG_STATUS1_BASE));
-	kbd_data->s2 = *((volatile uchar*)(CFG_STATUS2_BASE));
-
-	return kbd_data;
-}
-
-static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str)
-{
-	char s1 = str[0];
-	char s2;
-
-	if (s1 >= '0' && s1 <= '9')
-		s1 -= '0';
-	else if (s1 >= 'a' && s1 <= 'f')
-		s1 = s1 - 'a' + 10;
-	else if (s1 >= 'A' && s1 <= 'F')
-		s1 = s1 - 'A' + 10;
-	else
-		return -1;
-
-	if (((S1_ROT & kbd_data->s1) >> 4) != s1)
-		return -1;
-
-	s2 = (S2_Q | S2_M) & kbd_data->s2;
-
-	switch (str[1]) {
-	case 'q':
-	case 'Q':
-		if (s2 == S2_Q)
-			return -1;
-		break;
-	case 'm':
-	case 'M':
-		if (s2 == S2_M)
-			return -1;
-		break;
-	case '\0':
-		if (s2 == (S2_Q | S2_M))
-			return 0;
-	default:
-		return -1;
-	}
-
-	if (str[2])
-		return -1;
-
-	return 0;
-}
-
-static uchar *key_match (const struct kbd_data_t *kbd_data)
-{
-	uchar magic[sizeof (kbd_magic_prefix) + 1];
-	uchar *suffix;
-	uchar *kbd_magic_keys;
-
-	/*
-	 * The following string defines the characters that can be appended
-	 * to "key_magic" to form the names of environment variables that
-	 * hold "magic" key codes, i. e. such key codes that can cause
-	 * pre-boot actions. If the string is empty (""), then only
-	 * "key_magic" is checked (old behaviour); the string "125" causes
-	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
-	 */
-	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
-		kbd_magic_keys = "";
-
-	/* loop over all magic keys;
-	 * use '\0' suffix in case of empty string
-	 */
-	for (suffix = kbd_magic_keys; *suffix ||
-		     suffix == kbd_magic_keys; ++suffix) {
-		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-
-		if (compare_magic(kbd_data, getenv(magic)) == 0) {
-			uchar cmd_name[sizeof (kbd_command_prefix) + 1];
-			char *cmd;
-
-			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-			cmd = getenv (cmd_name);
-
-			return (cmd);
-		}
-	}
-
-	return (NULL);
-}
-
-#endif /* CONFIG_PREBOOT */
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_PREBOOT
-	struct kbd_data_t kbd_data;
-	/* Decode keys */
-	uchar *str = strdup (key_match (get_keys (&kbd_data)));
-	/* Set or delete definition */
-	setenv ("preboot", str);
-	free (str);
-#endif /* CONFIG_PREBOOT */
-
-	return 0;
-}
-
-int board_early_init_r (void)
-{
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
-	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
-	return 0;
-}
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
diff --git a/board/hmi1001/u-boot.lds b/board/hmi1001/u-boot.lds
deleted file mode 100644
index 123a14c5aa..0000000000
--- a/board/hmi1001/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within  */
-    /* the sector layout of our flash chips!    XXX FIXME XXX   */
-
-    cpu/mpc5xxx/start.o          (.text)
-    cpu/mpc5xxx/traps.o          (.text)
-    lib_generic/crc32.o         (.text)
-    lib_ppc/cache.o             (.text)
-    lib_ppc/time.o              (.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o        (.ppcenv)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ispan/Makefile b/board/ispan/Makefile
deleted file mode 100644
index b2ffd28833..0000000000
--- a/board/ispan/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ispan/config.mk b/board/ispan/config.mk
deleted file mode 100644
index 4600dbb068..0000000000
--- a/board/ispan/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Interphase iSPAN Communications Controllers
-#
-#TEXT_BASE = 0xFF800000
-#TEXT_BASE = 0xFFBA0000
-TEXT_BASE = 0xFE7A0000
diff --git a/board/ispan/ispan.c b/board/ispan/ispan.c
deleted file mode 100644
index d39b8cd533..0000000000
--- a/board/ispan/ispan.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Interphase iSPAN Communications Controllers
- * (453x and others). Tested on 4532.
- *
- * Derived from iSPAN 4539 port (iphase4539) by
- * Wolfgang Grandegger <wg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <asm/io.h>
-
-/*
- * I/O Ports configuration table
- *
- * If conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-#define CFG_FCC3 (CONFIG_ETHER_INDEX == 3)
-
-const iop_conf_t iop_conf_tab[4][32] = {
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10 */
-	/* PA9  */ { 0,          1,   0,   1,   0,   0 }, /* SMC2 SMTXD */
-	/* PA8  */ { 0,          1,   0,   0,   0,   0 }, /* SMC2 SMRXD */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7 */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6 */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5 */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4 */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3 */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2 */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1 */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0 */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_DV  */
-	/* PB16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_ER  */
-	/* PB15 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_ER  */
-	/* PB14 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_EN  */
-	/* PB13 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII COL    */
-	/* PB12 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII CRS    */
-	/* PB11 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[3] */
-	/* PB10 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[2] */
-	/* PB9  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[1] */
-	/* PB8  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[0] */
-	/* PB7  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[0] */
-	/* PB6  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[1] */
-	/* PB5  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[2] */
-	/* PB4  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[3] */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31 */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30 */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29 */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28 */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27 */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26 */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25 */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24 */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23 */
-	/* PC22 */ { 0,          0,   0,   0,   0,   0 }, /* PC22 */
-	/* PC21 */ { 0,          0,   0,   0,   0,   0 }, /* PC21 */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
-	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19 */
-	/* PC18 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Rx Clock (CLK14) */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
-	/* PC16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Tx Clock (CLK16) */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12 */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11 */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10 */
-	/* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9  */
-	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8  */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7  */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6  */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5  */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4  */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3  */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2  */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1  */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }  /* PC0  */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 0,          0,   0,   0,   0,   0 }, /* PD31 */
-	/* PD30 */ { 0,          0,   0,   0,   0,   0 }, /* PD30 */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29 */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28 */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27 */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26 */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25 */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24 */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23 */
-	/* PD22 */ { 0,          0,   0,   0,   0,   0 }, /* PD22 */
-	/* PD21 */ { 0,          0,   0,   0,   0,   0 }, /* PD21 */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD20 */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19 */
-	/* PD18 */ { 0,          1,   1,   0,   0,   0 }, /* SPICLK  */
-	/* PD17 */ { 0,          1,   1,   0,   0,   0 }, /* SPIMOSI */
-	/* PD16 */ { 0,          1,   1,   0,   0,   0 }, /* SPIMISO */
-	/* PD15 */ { 0,          1,   1,   0,   1,   0 }, /* I2C SDA */
-	/* PD14 */ { 0,          1,   1,   0,   1,   0 }, /* I2C SCL */
-	/* PD13 */ { 1,          0,   0,   0,   0,   0 }, /* MII MDIO */
-	/* PD12 */ { 1,          0,   0,   1,   0,   0 }, /* MII MDC  */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11 */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10 */
-	/* PD9  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 SMTXD */
-	/* PD8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 SMRXD */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7 */
-	/* PD6  */ { CFG_FCC3,   0,   0,   1,   0,   1 }, /* MII PHY Reset  */
-	/* PD5  */ { CFG_FCC3,   0,   0,   1,   0,   0 }, /* MII PHY Enable */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4 */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* pin doesn't exist */
-    }
-};
-
-#define PSPAN_ADDR      0xF0020000
-#define EEPROM_REG      0x408
-#define EEPROM_READ_CMD 0xA000
-#define PSPAN_WRITE(a,v) \
-    *((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio()
-#define PSPAN_READ(a) \
-    *((volatile unsigned long *)(PSPAN_ADDR+(a)))
-
-static int seeprom_read (int addr, uchar * data, int size)
-{
-	ulong val, cmd;
-	int i;
-
-	for (i = 0; i < size; i++) {
-
-		cmd = EEPROM_READ_CMD;
-		cmd |= ((addr + i) << 24) & 0xff000000;
-
-		/* Wait for ACT to authorize write */
-		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
-			eieio ();
-
-		/* Write command */
-		PSPAN_WRITE (EEPROM_REG, cmd);
-
-		/* Wait for data to be valid */
-		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
-			eieio ();
-		/* Do it twice, first read might be erratic */
-		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
-			eieio ();
-
-		/* Read error */
-		if (val & 0x00000040) {
-			return -1;
-		} else {
-			data[i] = (val >> 16) & 0xff;
-		}
-	}
-	return 0;
-}
-
-/***************************************************************
- * We take some basic Hardware Configuration Parameter from the
- * Serial EEPROM conected to the PSpan bridge. We keep it as
- * simple as possible.
- */
-#ifdef DEBUG
-static int hwc_flash_size (void)
-{
-	uchar byte;
-
-	if (!seeprom_read (0x40, &byte, sizeof (byte))) {
-		switch ((byte >> 2) & 0x3) {
-		case 0x1:
-			return 0x0400000;
-			break;
-		case 0x2:
-			return 0x0800000;
-			break;
-		case 0x3:
-			return 0x1000000;
-		default:
-			return 0x0100000;
-		}
-	}
-	return -1;
-}
-
-static int hwc_local_sdram_size (void)
-{
-	uchar byte;
-
-	if (!seeprom_read (0x40, &byte, sizeof (byte))) {
-		switch ((byte & 0x03)) {
-		case 0x1:
-			return 0x0800000;
-		case 0x2:
-			return 0x1000000;
-		default:
-			return 0;			/* not present */
-		}
-	}
-	return -1;
-}
-#endif	/* DEBUG */
-
-static int hwc_main_sdram_size (void)
-{
-	uchar byte;
-
-	if (!seeprom_read (0x41, &byte, sizeof (byte))) {
-		return 0x1000000 << ((byte >> 5) & 0x7);
-	}
-	return -1;
-}
-
-static int hwc_serial_number (void)
-{
-	int sn = -1;
-
-	if (!seeprom_read (0xa0, (uchar *) &sn, sizeof (sn))) {
-		sn = cpu_to_le32 (sn);
-	}
-	return sn;
-}
-
-static int hwc_mac_address (char *str)
-{
-	char mac[6];
-
-	if (!seeprom_read (0xb0, (uchar *)mac, sizeof (mac))) {
-		sprintf (str, "%02X:%02X:%02X:%02X:%02X:%02X",
-				 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-	} else {
-		strcpy (str, "ERROR");
-		return -1;
-	}
-	return 0;
-}
-
-static int hwc_manufact_date (char *str)
-{
-	uchar byte;
-	int value;
-
-	if (seeprom_read (0x92, &byte, sizeof (byte)))
-		goto out;
-	value = byte;
-	if (seeprom_read (0x93, &byte, sizeof (byte)))
-		goto out;
-	value += byte << 8;
-	sprintf (str, "%02d/%02d/%04d",
-			 value & 0x1F, (value >> 5) & 0xF,
-			 1980 + ((value >> 9) & 0x1FF));
-	return 0;
-
-out:
-	strcpy (str, "ERROR");
-	return -1;
-}
-
-static int hwc_board_type (char **str)
-{
-	ushort id = 0;
-
-	if (seeprom_read (7, (uchar *) & id, sizeof (id)) == 0) {
-		switch (id) {
-		case 0x9080:
-			*str = "4532-002";
-			break;
-		case 0x9081:
-			*str = "4532-001";
-			break;
-		case 0x9082:
-			*str = "4532-000";
-			break;
-		default:
-			*str = "Unknown";
-		}
-	} else {
-		*str = "Unknown";
-	}
-
-	return id;
-}
-
-long int initdram (int board_type)
-{
-	long maxsize = hwc_main_sdram_size();
-
-#if !defined(CFG_RAMBOOT) && !defined(CFG_USE_FIRMWARE)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar *base;
-	int i;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x00000026;
-	immap->im_siu_conf.sc_ppc_alrh = 0x01276345;
-	immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
-	immap->im_siu_conf.sc_lcl_acr  = 0x00000000;
-	immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
-	immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-	immap->im_siu_conf.sc_ltescr1  = 0x00004000;
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	/* Initialise 60x bus SDRAM */
-	base = (uchar *)(CFG_SDRAM_BASE | 0x110);
-	memctl->memc_psrt  = CFG_PSRT;
-	memctl->memc_or1   = CFG_60x_OR;
-	memctl->memc_br1   = CFG_SDRAM_BASE | CFG_60x_BR;
-
-	memctl->memc_psdmr = CFG_PSDMR | 0x28000000;
-	*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x08000000;
-	for (i = 0; i < 8; i++)
-		*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x18000000;
-	*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x40000000;
-
-	/* Initialise local bus SDRAM */
-	base = (uchar *)CFG_LSDRAM_BASE;
-	memctl->memc_lsrt  = CFG_LSRT;
-	memctl->memc_or2   = CFG_LOC_OR;
-	memctl->memc_br2   = CFG_LSDRAM_BASE | CFG_LOC_BR;
-
-	memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
-	*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
-	for (i = 0; i < 8; i++)
-		*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
-	*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (~(memctl->memc_or1 & BRx_BA_MSK) + 1) / 2;
-
-	maxsize = get_ram_size((long *)(memctl->memc_br1 & BRx_BA_MSK), maxsize);
-
-	memctl->memc_or1 |= ~(maxsize - 1);
-
-	if (maxsize != hwc_main_sdram_size())
-		puts("Oops: memory test has not found all memory!\n");
-#endif /* !CFG_RAMBOOT && !CFG_USE_FIRMWARE */
-
-	/* Return total RAM size (size of 60x SDRAM) */
-	return maxsize;
-}
-
-int checkboard(void)
-{
-	char string[32], *id;
-
-	hwc_manufact_date(string);
-	hwc_board_type(&id);
-	printf("Board: Interphase iSPAN %s (#%d %s)\n",
-	       id, hwc_serial_number(), string);
-#ifdef DEBUG
-	printf("Manufacturing date: %s\n", string);
-	printf("Serial number     : %d\n", hwc_serial_number());
-	printf("FLASH size        : %d MB\n", hwc_flash_size() >> 20);
-	printf("Main SDRAM size   : %d MB\n", hwc_main_sdram_size() >> 20);
-	printf("Local SDRAM size  : %d MB\n", hwc_local_sdram_size() >> 20);
-	hwc_mac_address(string);
-	printf("MAC address       : %s\n", string);
-#endif
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	char *s, str[32];
-	int num;
-
-	if ((s = getenv("serial#")) == NULL &&
-	    (num = hwc_serial_number()) != -1) {
-		sprintf(str, "%06d", num);
-		setenv("serial#", str);
-	}
-	if ((s = getenv("ethaddr")) == NULL && hwc_mac_address(str) == 0) {
-		setenv("ethaddr", str);
-	}
-
-	return 0;
-}
diff --git a/board/ispan/u-boot.lds b/board/ispan/u-boot.lds
deleted file mode 100644
index bf8048d27e..0000000000
--- a/board/ispan/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
deleted file mode 100644
index 0207d1222a..0000000000
--- a/board/kb9202/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Adapted for KwikByte KB920x boards - APR2005
-#
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= kb9202.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk
deleted file mode 100644
index 9ce161e55f..0000000000
--- a/board/kb9202/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x21f00000
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
deleted file mode 100644
index ec51dca914..0000000000
--- a/board/kb9202/kb9202.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <at91rm9200_net.h>
-#include <lxt971a.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-void lowlevel_init(void) {
-	/* Required by assembly functions - do nothing	*/
-}
-
-int board_init (void)
-{
-	/* Enable Ctrlc */
-	console_init_f ();
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	gd->bd->bi_arch_number = MACH_TYPE_KB9200;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
-
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac);
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status);
-
-/*
- * Name:
- *	at91rm9200_GetPhyInterface
- * Description:
- *	Initialise the interface functions to the PHY
- * Arguments:
- *	None
- * Return value:
- *	None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-	p_phyops->Init = lxt972_InitPhy;
-	p_phyops->IsPhyConnected = lxt972_IsPhyConnected;
-	p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed;
-	p_phyops->AutoNegotiate = lxt972_AutoNegotiate;
-}
-
-#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/board/kb9202/u-boot.lds b/board/kb9202/u-boot.lds
deleted file mode 100644
index 76df6b2af1..0000000000
--- a/board/kb9202/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm920t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/kup/Makefile b/board/kup/Makefile
deleted file mode 100644
index 957b3d3132..0000000000
--- a/board/kup/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o flash.o kup.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
deleted file mode 100644
index 4727a5b1b2..0000000000
--- a/board/kup/kup4k/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kup/kup4k/config.mk b/board/kup/kup4k/config.mk
deleted file mode 100644
index 22e30b2cac..0000000000
--- a/board/kup/kup4k/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# KUP4K board
-#
-
-TEXT_BASE = 0x40000000
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
deleted file mode 100644
index 7e09a156e7..0000000000
--- a/board/kup/kup4k/kup4k.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "../common/kup.h"
-#ifdef CONFIG_KUP4K_LOGO
-   #include "s1d13706.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef DEBUG
-#ifdef  DEBUG
-# define debugk(fmt,args...)    printf(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-typedef struct {
-	volatile unsigned char *VmemAddr;
-	volatile unsigned char *RegAddr;
-} FB_INFO_S1D13xxx;
-
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_KUP4K_LOGO
-void lcd_logo(bd_t *bd);
-#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47, /* last */
-
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-		    0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
-
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
-					    _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07, /* last */
-				_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7FFFFC07, /* last */
-		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	uchar *latch,rev,mod;
-
-	/*
-	 * Init ChipSelect #4 (CAN + HW-Latch)
-	 */
-	immap->im_memctl.memc_or4 = 0xFFFF8926;
-	immap->im_memctl.memc_br4 = 0x90000401;
-	__asm__ ("eieio");
-	latch=(uchar *)0x90000200;
-	rev = (*latch & 0xF8) >> 3;
-	mod=(*latch & 0x03);
-	printf ("Board: KUP4K Rev %d.%d\n",rev,mod);
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0 = 0;
-	long int size_b1 = 0;
-	long int size_b2 = 0;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			 sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
-
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
-
-
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80002830;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 1 */
-	udelay (1);
-	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 1 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 2 */
-	udelay (1);
-	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 2 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-	udelay (1000);
-
-	size_b0 = 0x01000000;
-	size_b1 = 0x01000000;
-	size_b2 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
-	udelay (1000);
-	memctl->memc_or1 = 0xFF000A00;
-	memctl->memc_br1 = 0x00000081;
-	memctl->memc_or2 = 0xFE000A00;
-	memctl->memc_br2 = 0x01000081;
-	memctl->memc_or3 = 0xFC000A00;
-	memctl->memc_br3 = 0x02000081;
-
-	udelay (10000);
-
-	return (size_b0 + size_b1 + size_b2);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_STATUS_LED
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-#endif
-#ifdef CONFIG_KUP4K_LOGO
-	bd_t *bd = gd->bd;
-
-	lcd_logo (bd);
-#endif							/* CONFIG_KUP4K_LOGO */
-#ifdef CONFIG_IDE_LED
-	/* Configure PA8 as output port */
-	immap->im_ioport.iop_padir |= 0x80;
-	immap->im_ioport.iop_paodr |= 0x80;
-	immap->im_ioport.iop_papar &= ~0x80;
-	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
-#endif
-	setenv("hw","4k");
-	poweron_key();
-	return (0);
-}
-
-#ifdef CONFIG_KUP4K_LOGO
-
-
-void lcd_logo (bd_t * bd)
-{
-	FB_INFO_S1D13xxx fb_info;
-	S1D_INDEX s1dReg;
-	S1D_VALUE s1dValue;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl;
-	ushort i;
-	uchar *fb;
-	int rs, gs, bs;
-	int r = 8, g = 8, b = 4;
-	int r1, g1, b1;
-	int n;
-	char tmp[64];		/* long enough for environment variables */
-	int tft = 0;
-
-	immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM);
-	immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM);
-	immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM);	/* set to 0 = enabled */
-	immr->im_cpm.cp_pbdir |= (PB_LCD_PWM);
-
-/*----------------------------------------------------------------------------- */
-/* Initialize the chip and the frame buffer driver. */
-/*----------------------------------------------------------------------------- */
-	memctl = &immr->im_memctl;
-
-
-	/*
-	 * Init ChipSelect #5 (S1D13768)
-	 */
-	memctl->memc_or5 = 0xFFC007F0;	/* 4 MB  17 WS or externel TA */
-	memctl->memc_br5 = 0x80080801;	/* Start at 0x80080000 */
-	__asm__ ("eieio");
-
-	fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
-	fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
-
-	if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
-	    || (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
-		printf ("Warning:LCD Controller S1D13706 not found\n");
-		setenv ("lcd", "none");
-		return;
-	}
-
-
-	for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) {
-		s1dReg = aS1DRegs_prelimn[i].Index;
-		s1dValue = aS1DRegs_prelimn[i].Value;
-		debugk ("s13768 reg: %02x value: %02x\n",
-			aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value);
-		((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
-			s1dValue;
-	}
-
-
-	n = getenv_r ("lcd", tmp, sizeof (tmp));
-	if (n > 0) {
-		if (!strcmp ("tft", tmp))
-			tft = 1;
-		else
-			tft = 0;
-	}
-
-	debugk ("Port=0x%02x -> TFT=%d\n", tft,
-		((S1D_VALUE *) fb_info.RegAddr)[0xAC]);
-
-	/* init controller */
-	if (!tft) {
-		for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) {
-			s1dReg = aS1DRegs_stn[i].Index;
-			s1dValue = aS1DRegs_stn[i].Value;
-			debugk ("s13768 reg: %02x value: %02x\n",
-				aS1DRegs_stn[i].Index,
-				aS1DRegs_stn[i].Value);
-			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] =
-				s1dValue;
-		}
-		n = getenv_r ("contrast", tmp, sizeof (tmp));
-		((S1D_VALUE *) fb_info.RegAddr)[0xB3] =
-			(n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0;
-		switch (bd->bi_busfreq) {
-		case 40000000:
-			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
-			break;
-		case 48000000:
-			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
-			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-			break;
-		default:
-			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
-		case 64000000:
-			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
-			break;
-		}
-		/*   setenv("lcd","stn"); */
-	} else {
-		for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) {
-			s1dReg = aS1DRegs_tft[i].Index;
-			s1dValue = aS1DRegs_tft[i].Value;
-			debugk ("s13768 reg: %02x value: %02x\n",
-				aS1DRegs_tft[i].Index,
-				aS1DRegs_tft[i].Value);
-			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
-				s1dValue;
-		}
-
-		switch (bd->bi_busfreq) {
-		default:
-			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
-		case 40000000:
-			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42;
-			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30;
-			break;
-		}
-		/* setenv("lcd","tft"); */
-	}
-
-	/* create and set colormap */
-	rs = 256 / (r - 1);
-	gs = 256 / (g - 1);
-	bs = 256 / (b - 1);
-	for (i = 0; i < 256; i++) {
-		r1 = (rs * ((i / (g * b)) % r)) * 255;
-		g1 = (gs * ((i / b) % g)) * 255;
-		b1 = (bs * ((i) % b)) * 255;
-		debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4);
-		S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
-				   (b1 >> 4));
-	}
-
-	/* copy bitmap */
-	fb = (uchar *) (fb_info.VmemAddr);
-	memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
-}
-#endif	/* CONFIG_KUP4K_LOGO */
diff --git a/board/kup/kup4k/s1d13706.h b/board/kup/kup4k/s1d13706.h
deleted file mode 100644
index cd5eccc6f5..0000000000
--- a/board/kup/kup4k/s1d13706.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*---------------------------------------------------------------------------- */
-/* */
-/*  File generated by S1D13706CFG.EXE */
-/* */
-/*  Copyright (c) 2000,2001 Epson Research and Development, Inc. */
-/*  All rights reserved. */
-/* */
-/*---------------------------------------------------------------------------- */
-
-/* Panel: 320x240x8bpp 70Hz Color Single STN 8-bit (PCLK=6.250MHz) (Format 2) */
-
-#define S1D_DISPLAY_WIDTH           320
-#define S1D_DISPLAY_HEIGHT          240
-#define S1D_DISPLAY_BPP             8
-#define S1D_DISPLAY_SCANLINE_BYTES  320
-#define S1D_PHYSICAL_VMEM_ADDR      0x800A0000L
-#define S1D_PHYSICAL_VMEM_SIZE      0x14000L
-#define S1D_PHYSICAL_REG_ADDR       0x80080000L
-#define S1D_PHYSICAL_REG_SIZE       0x100
-#define S1D_DISPLAY_PCLK            6250
-#define S1D_PALETTE_SIZE            256
-#define S1D_REGDELAYOFF             0xFFFE
-#define S1D_REGDELAYON              0xFFFF
-
-#define S1D_WRITE_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0A/sizeof(S1D_VALUE)] = (S1D_VALUE)((r)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x09/sizeof(S1D_VALUE)] = (S1D_VALUE)((g)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x08/sizeof(S1D_VALUE)] = (S1D_VALUE)((b)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x0B/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-}
-
-#define S1D_READ_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0F/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-    r = ((volatile S1D_VALUE*)(p))[0x0E/sizeof(S1D_VALUE)];  \
-    g = ((volatile S1D_VALUE*)(p))[0x0D/sizeof(S1D_VALUE)];  \
-    b = ((volatile S1D_VALUE*)(p))[0x0C/sizeof(S1D_VALUE)];  \
-}
-
-typedef unsigned short S1D_INDEX;
-typedef unsigned char  S1D_VALUE;
-
-
-typedef struct
-{
-    S1D_INDEX Index;
-    S1D_VALUE Value;
-} S1D_REGS;
-
-
-static S1D_REGS aS1DRegs_prelimn[] =
-{
-    {0x10,0x00},   /* PANEL Type Register */
-    {0xA8,0x00},   /* GPIO Config Register 0 */
-    {0xA9,0x80},   /* GPIO Config Register 1 */
-
-};
-
-static S1D_REGS aS1DRegs_stn[] =
-{
-    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
-    {0x10,0xD0},   /* PANEL Type Register */
-    {0x11,0x00},   /* MOD Rate Register */
-    {0x14,0x27},   /* Horizontal Display Period Register */
-    {0x16,0x00},   /* Horizontal Display Period Start Pos Register 0 */
-    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
-    {0x18,0xF0},   /* Vertical Total Register 0 */
-    {0x19,0x00},   /* Vertical Total Register 1 */
-    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
-    {0x1D,0x00},   /* Vertical Display Period Register 1 */
-    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
-    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
-    {0x20,0x87},   /* Horizontal Sync Pulse Width Register */
-    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
-    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
-    {0x24,0x80},   /* Vertical Sync Pulse Width Register */
-    {0x26,0x01},   /* Vertical Sync Pulse Start Pos Register 0 */
-    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
-    {0x70,0x83},   /* Display Mode Register */
-    {0x71,0x00},   /* Special Effects Register */
-    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
-    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
-    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
-    {0x78,0x50},   /* Main Window Address Offset Register 0 */
-    {0x79,0x00},   /* Main Window Address Offset Register 1 */
-    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
-    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
-    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
-    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
-    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
-    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
-    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
-    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
-    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
-    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
-    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
-    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
-    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
-    {0xA0,0x00},   /* Power Save Config Register */
-    {0xA1,0x00},   /* CPU Access Control Register */
-    {0xA2,0x00},   /* Software Reset Register */
-    {0xA3,0x00},   /* BIG Endian Support Register */
-    {0xA4,0x00},   /* Scratch Pad Register 0 */
-    {0xA5,0x00},   /* Scratch Pad Register 1 */
-    {0xA8,0x01},   /* GPIO Config Register 0 */
-    {0xA9,0x80},   /* GPIO Config Register 1 */
-    {0xAC,0x01},   /* GPIO Status Control Register 0 */
-    {0xAD,0x00},   /* GPIO Status Control Register 1 */
-    {0xB0,0x10},   /* PWM CV Clock Control Register */
-    {0xB1,0x80},   /* PWM CV Clock Config Register */
-    {0xB2,0x00},   /* CV Clock Burst Length Register */
-    {0xAD,0x80},   /* reset seq */
-    {0x70,0x03},
-};
-
-static S1D_REGS aS1DRegs_tft[] =
-{
-    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
-    {0x05,0x42},   /* PCLK Config  Register */
-    {0x10,0x61},   /* PANEL Type Register */
-    {0x11,0x00},   /* MOD Rate Register */
-    {0x12,0x30},   /* Horizontal Total Register */
-    {0x14,0x27},   /* Horizontal Display Period Register */
-    {0x16,0x11},   /* Horizontal Display Period Start Pos Register 0 */
-    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
-    {0x18,0xFA},   /* Vertical Total Register 0 */
-    {0x19,0x00},   /* Vertical Total Register 1 */
-    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
-    {0x1D,0x00},   /* Vertical Display Period Register 1 */
-    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
-    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
-    {0x20,0x07},   /* Horizontal Sync Pulse Width Register */
-    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
-    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
-    {0x24,0x00},   /* Vertical Sync Pulse Width Register */
-    {0x26,0x00},   /* Vertical Sync Pulse Start Pos Register 0 */
-    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
-    {0x70,0x03},   /* Display Mode Register */
-    {0x71,0x00},   /* Special Effects Register */
-    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
-    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
-    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
-    {0x78,0x50},   /* Main Window Address Offset Register 0 */
-    {0x79,0x00},   /* Main Window Address Offset Register 1 */
-    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
-    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
-    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
-    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
-    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
-    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
-    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
-    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
-    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
-    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
-    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
-    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
-    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
-    {0xA0,0x00},   /* Power Save Config Register */
-    {0xA1,0x00},   /* CPU Access Control Register */
-    {0xA2,0x00},   /* Software Reset Register */
-    {0xA3,0x00},   /* BIG Endian Support Register */
-    {0xA4,0x00},   /* Scratch Pad Register 0 */
-    {0xA5,0x00},   /* Scratch Pad Register 1 */
-    {0xA8,0x01},   /* GPIO Config Register 0 */
-    {0xA9,0x80},   /* GPIO Config Register 1 */
-    {0xAC,0x01},   /* GPIO Status Control Register 0 */
-    {0xAD,0x00},   /* GPIO Status Control Register 1 */
-    {0xB0,0x10},   /* PWM CV Clock Control Register */
-    {0xB1,0x80},   /* PWM CV Clock Config Register */
-    {0xB2,0x00},   /* CV Clock Burst Length Register */
-    {0xAD,0x80},   /* reset seq */
-    {0x70,0x03},
-};
diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
deleted file mode 100644
index 8625999df4..0000000000
--- a/board/kup/kup4k/u-boot.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o		(.text)
-/*
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_ppc/ppcstring.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
deleted file mode 100644
index c0cf1cb747..0000000000
--- a/board/kup/kup4k/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
deleted file mode 100644
index 4727a5b1b2..0000000000
--- a/board/kup/kup4x/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kup/kup4x/config.mk b/board/kup/kup4x/config.mk
deleted file mode 100644
index 61d4e09f64..0000000000
--- a/board/kup/kup4x/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# KUP4X board
-#
-
-TEXT_BASE = 0x40000000
diff --git a/board/kup/kup4x/kup4x.c b/board/kup/kup4x/kup4x.c
deleted file mode 100644
index a5807eb01c..0000000000
--- a/board/kup/kup4x/kup4x.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <post.h>
-#include "../common/kup.h"
-#ifdef CONFIG_KUP4K_LOGO
-/* #include "s1d13706.h" */
-#endif
-
-#define KUP4X_USB
-
-
-typedef struct {
-	volatile unsigned char *VmemAddr;
-	volatile unsigned char *RegAddr;
-} FB_INFO_S1D13xxx;
-
-/* ------------------------------------------------------------------------- */
-
-int usb_init_kup4x (void);
-
-
-#ifdef CONFIG_KUP4K_LOGO
-void lcd_logo (bd_t * bd);
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47,		/* last */
-
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1FF77C35, 0xEFEABC34, 0x1FB57C35,	/* last */
-
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7FFFFC07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile uchar *latch;
-	uchar rev, mod;
-
-	/*
-	 * Init ChipSelect #4 (CAN + HW-Latch)
-	 */
-	memctl->memc_or4 = 0xFFFF8926;
-	memctl->memc_br4 = 0x90000401;
-	__asm__ ("eieio");
-	latch = (volatile uchar *) 0x90000200;
-	rev = (*latch & 0xF8) >> 3;
-	mod = (*latch & 0x03);
-	printf ("Board: KUP4X Rev %d.%d\n",rev,mod);
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0 = 0;
-	long int size_b1 = 0;
-	long int size_b2 = 0;
-	long int size_b3 = 0;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
-
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
-
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80002830;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 1 */
-	udelay (1);
-	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 1 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 2 */
-	udelay (1);
-	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 2 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mcr = 0x8000C105;	/* SDRAM bank 2 */
-	udelay (1);
-	memctl->memc_mcr = 0x8000C830;	/* SDRAM bank 2 - execute twice */
-	udelay (1);
-	memctl->memc_mcr = 0x8000C106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-	udelay (1000);
-	size_b0 = 0x01000000;
-	size_b1 = 0x01000000;
-	size_b2 = 0x01000000;
-	size_b3 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
-	udelay (1000);
-	memctl->memc_or1 = 0xFF000A00;
-	memctl->memc_br1 = 0x00000081;
-	memctl->memc_or2 = 0xFE000A00;
-	memctl->memc_br2 = 0x01000081;
-	memctl->memc_or3 = 0xFD000A00;
-	memctl->memc_br3 = 0x02000081;
-	memctl->memc_or6 = 0xFC000A00;
-	memctl->memc_br6 = 0x03000081;
-	udelay (10000);
-
-	return (size_b0 + size_b1 + size_b2 + size_b3);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-int misc_init_r (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-#ifdef CONFIG_IDE_LED
-	/* Configure PA8 as output port */
-	immap->im_ioport.iop_padir |= 0x80;
-	immap->im_ioport.iop_paodr |= 0x80;
-	immap->im_ioport.iop_papar &= ~0x80;
-	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
-#endif
-#ifdef KUP4X_USB
-	usb_init_kup4x ();
-#endif
-	setenv ("hw", "4x");
-	poweron_key ();
-	return (0);
-}
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
deleted file mode 100644
index 8625999df4..0000000000
--- a/board/kup/kup4x/u-boot.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o		(.text)
-/*
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_ppc/ppcstring.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
deleted file mode 100644
index c0cf1cb747..0000000000
--- a/board/kup/kup4x/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile
deleted file mode 100644
index 424ab1cf9e..0000000000
--- a/board/m5271evb/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/m5271evb/config.mk b/board/m5271evb/config.mk
deleted file mode 100644
index 9a7af7c2c6..0000000000
--- a/board/m5271evb/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0xffe00000
diff --git a/board/m5271evb/m5271evb.c b/board/m5271evb/m5271evb.c
deleted file mode 100644
index c26c91d1b7..0000000000
--- a/board/m5271evb/m5271evb.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5271.h>
-#include <asm/immap_5271.h>
-
-int checkboard (void) {
-	puts ("Board: Freescale M5271EVB\n");
-	return 0;
-};
-
-long int initdram (int board_type) {
-
-	int i;
-
-	/* Enable Address lines 23-21 and lower 16bits of data path */
-	mbar_writeByte(MCF_GPIO_PAR_AD, MCF_GPIO_AD_ADDR23 |
-			MCF_GPIO_AD_ADDR22 | MCF_GPIO_AD_ADDR21 |
-			MCF_GPIO_AD_DATAL);
-
-	/* Set CS2 pin to be SD_CS0 */
-	mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS)
-			| MCF_GPIO_PAR_CS_PAR_CS2);
-
-	/* Configure SDRAM Control Pin Assignemnt Register */
-	mbar_writeByte(MCF_GPIO_PAR_SDRAM, MCF_GPIO_SDRAM_CSSDCS_00 |
-			MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS |
-			MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE |
-			MCF_GPIO_SDRAM_SDCS_11);
-
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
-		/* Initialize DRAM Control Register: DCR */
-		mbar_writeShort(MCF_SDRAMC_DCR,
-				MCF_SDRAMC_DCR_RTIM(0x01)
-				| MCF_SDRAMC_DCR_RC(0x30));
-
-		/*
-		 * Initialize DACR0
-		 *
-		 * CASL: 01
-		 * CBM: cmd at A20, bank select bits 21 and up
-		 * PS: 32bit port size
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18)
-				| MCF_SDRAMC_DACRn_CASL(1)
-				| MCF_SDRAMC_DACRn_CBM(3)
-				| MCF_SDRAMC_DACRn_PS(0));
-
-		/* Initialize DMR0 */
-		mbar_writeLong(MCF_SDRAMC_DMR0,
-				MCF_SDRAMC_DMRn_BAM_16M
-				| MCF_SDRAMC_DMRn_V);
-
-		/* Set IP bit in DACR */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_IP);
-
-		/* Wait at least 20ns to allow banks to precharge */
-		for (i = 0; i < 5; i++)
-			asm(" nop");
-
-		/* Write to this block to initiate precharge */
-		*(u32 *)(CFG_SDRAM_BASE) = 0xa5a5a5a5;
-
-		/* Set RE bit in DACR */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_RE);
-
-		/* Wait for at least 8 auto refresh cycles to occur */
-		for (i = 0; i < 2000; i++)
-			asm(" nop");
-
-		/* Finish the configuration by issuing the MRS */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_MRS);
-
-		/*
-		 * Write to the SDRAM Mode Register A0-A11 = 0x400
-		 *
-		 * Write Burst Mode = Programmed Burst Length
-		 * Op Mode = Standard Op
-		 * CAS Latency = 2
-		 * Burst Type = Sequential
-		 * Burst Length = 1
-		 */
-		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
-	}
-
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-};
-
-int testdram (void) {
-
-	/* TODO: XXX XXX XXX */
-	printf ("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/m5271evb/u-boot.lds b/board/m5271evb/u-boot.lds
deleted file mode 100644
index 69f31793ad..0000000000
--- a/board/m5271evb/u-boot.lds
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(m68k)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-GROUP(libgcc.a)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mcf52x2/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    cpu/mcf52x2/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    *(.got)
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   _sbss = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile
deleted file mode 100644
index 5869119697..0000000000
--- a/board/mcc200/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o lcd.o auto_update.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
deleted file mode 100644
index 63e4139fc2..0000000000
--- a/board/mcc200/auto_update.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <image.h>
-#include <asm/byteorder.h>
-#include <usb.h>
-
-#ifdef CFG_HUSH_PARSER
-#include <hush.h>
-#endif
-
-
-#ifdef CONFIG_AUTO_UPDATE
-
-#ifndef CONFIG_USB_OHCI
-#error "must define CONFIG_USB_OHCI"
-#endif
-
-#ifndef CONFIG_USB_STORAGE
-#error "must define CONFIG_USB_STORAGE"
-#endif
-
-#ifndef CFG_HUSH_PARSER
-#error "must define CFG_HUSH_PARSER"
-#endif
-
-#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
-#endif
-
-/*
- * Check whether a USB memory stick is plugged in.
- * If one is found:
- *	1) if prepare.img ist found load it into memory. If it is
- *		valid then run it.
- *	2) if preinst.img is found load it into memory. If it is
- *		valid then run it. Update the EEPROM.
- *	3) if firmw_01.img is found load it into memory. If it is valid,
- *		burn it into FLASH and update the EEPROM.
- *	4) if kernl_01.img is found load it into memory. If it is valid,
- *		burn it into FLASH and update the EEPROM.
- *	5) if app.img is found load it into memory. If it is valid,
- *		burn it into FLASH and update the EEPROM.
- *	6) if disk.img is found load it into memory. If it is valid,
- *		burn it into FLASH and update the EEPROM.
- *	7) if postinst.img is found load it into memory. If it is
- *		valid then run it. Update the EEPROM.
- */
-
-#undef AU_DEBUG
-
-#undef debug
-#ifdef	AU_DEBUG
-#define debug(fmt,args...)	printf (fmt ,##args)
-#else
-#define debug(fmt,args...)
-#endif	/* AU_DEBUG */
-
-/* possible names of files on the USB stick. */
-#define AU_FIRMWARE	"u-boot.img"
-#define AU_KERNEL	"kernel.img"
-
-struct flash_layout {
-	long start;
-	long end;
-};
-
-/* layout of the FLASH. ST = start address, ND = end address. */
-#define AU_FL_FIRMWARE_ST	0xfC000000
-#define AU_FL_FIRMWARE_ND	0xfC03FFFF
-#define AU_FL_KERNEL_ST		0xfC0C0000
-#define AU_FL_KERNEL_ND		0xfC1BFFFF
-
-static int au_usb_stor_curr_dev; /* current device */
-
-/* index of each file in the following arrays */
-#define IDX_FIRMWARE	0
-#define IDX_KERNEL	1
-
-/* max. number of files which could interest us */
-#define AU_MAXFILES 2
-
-/* pointers to file names */
-char *aufile[AU_MAXFILES];
-
-/* sizes of flash areas for each file */
-long ausize[AU_MAXFILES];
-
-/* array of flash areas start and end addresses */
-struct flash_layout aufl_layout[AU_MAXFILES] = { \
-	{AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, \
-	{AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, \
-};
-
-/* where to load files into memory */
-#define LOAD_ADDR ((unsigned char *)0x00200000)
-
-/* the app is the largest image */
-#define MAX_LOADSZ ausize[IDX_KERNEL]
-
-/*i2c address of the keypad status*/
-#define I2C_PSOC_KEYPAD_ADDR	0x53
-
-/* keypad mask */
-#define KEYPAD_ROW	3
-#define KEYPAD_COL	3
-#define KEYPAD_MASK_LO	((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF)
-#define KEYPAD_MASK_HI	((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8)
-
-/* externals */
-extern int fat_register_device(block_dev_desc_t *, int);
-extern int file_fat_detectfs(void);
-extern long file_fat_read(const char *, void *, unsigned long);
-extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int);
-extern int flash_sect_erase(ulong, ulong);
-extern int flash_sect_protect (int, ulong, ulong);
-extern int flash_write (char *, ulong, ulong);
-/* change char* to void* to shutup the compiler */
-extern block_dev_desc_t *get_dev (char*, int);
-extern int u_boot_hush_start(void);
-
-int au_check_cksum_valid(int idx, long nbytes)
-{
-	image_header_t *hdr;
-	unsigned long checksum;
-
-	hdr = (image_header_t *)LOAD_ADDR;
-
-	if (nbytes != (sizeof(*hdr) + ntohl(hdr->ih_size))) {
-		printf ("Image %s bad total SIZE\n", aufile[idx]);
-		return -1;
-	}
-	/* check the data CRC */
-	checksum = ntohl(hdr->ih_dcrc);
-
-	if (crc32 (0, (uchar *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size)) != checksum) {
-		printf ("Image %s bad data checksum\n", aufile[idx]);
-		return -1;
-	}
-	return 0;
-}
-
-int au_check_header_valid(int idx, long nbytes)
-{
-	image_header_t *hdr;
-	unsigned long checksum;
-	unsigned char buf[4];
-
-	hdr = (image_header_t *)LOAD_ADDR;
-	/* check the easy ones first */
-#undef CHECK_VALID_DEBUG
-#ifdef CHECK_VALID_DEBUG
-	printf("magic %#x %#x ", ntohl(hdr->ih_magic), IH_MAGIC);
-	printf("arch %#x %#x ", hdr->ih_arch, IH_CPU_ARM);
-	printf("size %#x %#lx ", ntohl(hdr->ih_size), nbytes);
-	printf("type %#x %#x ", hdr->ih_type, IH_TYPE_KERNEL);
-#endif
-	if (nbytes < sizeof(*hdr)) {
-		printf ("Image %s bad header SIZE\n", aufile[idx]);
-		return -1;
-	}
-	if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC) {
-		printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]);
-		return -1;
-	}
-	/* check the hdr CRC */
-	checksum = ntohl(hdr->ih_hcrc);
-	hdr->ih_hcrc = 0;
-
-	if (crc32 (0, (uchar *)hdr, sizeof(*hdr)) != checksum) {
-		printf ("Image %s bad header checksum\n", aufile[idx]);
-		return -1;
-	}
-	hdr->ih_hcrc = htonl(checksum);
-	/* check the type - could do this all in one gigantic if() */
-	if ((idx == IDX_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) {
-		printf ("Image %s wrong type\n", aufile[idx]);
-		return -1;
-	}
-	if ((idx == IDX_KERNEL) && (hdr->ih_type != IH_TYPE_KERNEL)) {
-		printf ("Image %s wrong type\n", aufile[idx]);
-		return -1;
-	}
-	/* recycle checksum */
-	checksum = ntohl(hdr->ih_size);
-	/* for kernel and app the image header must also fit into flash */
-	if (idx != IDX_FIRMWARE)
-		checksum += sizeof(*hdr);
-	/* check the size does not exceed space in flash. HUSH scripts */
-	/* all have ausize[] set to 0 */
-	if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
-		printf ("Image %s is bigger than FLASH\n", aufile[idx]);
-		return -1;
-	}
-	return 0;
-}
-
-int au_do_update(int idx, long sz)
-{
-	image_header_t *hdr;
-	char *addr;
-	long start, end;
-	int off, rc;
-	uint nbytes;
-
-	hdr = (image_header_t *)LOAD_ADDR;
-
-	/* execute a script */
-	if (hdr->ih_type == IH_TYPE_SCRIPT) {
-		addr = (char *)((char *)hdr + sizeof(*hdr));
-		/* stick a NULL at the end of the script, otherwise */
-		/* parse_string_outer() runs off the end. */
-		addr[ntohl(hdr->ih_size)] = 0;
-		addr += 8;
-		parse_string_outer(addr, FLAG_PARSE_SEMICOLON);
-		return 0;
-	}
-
-	start = aufl_layout[idx].start;
-	end = aufl_layout[idx].end;
-
-	/* unprotect the address range */
-	/* this assumes that ONLY the firmware is protected! */
-	if (idx == IDX_FIRMWARE) {
-#undef AU_UPDATE_TEST
-#ifdef AU_UPDATE_TEST
-		/* erase it where Linux goes */
-		start = aufl_layout[1].start;
-		end = aufl_layout[1].end;
-#endif
-		flash_sect_protect(0, start, end);
-	}
-
-	/*
-	 * erase the address range.
-	 */
-	debug ("flash_sect_erase(%lx, %lx);\n", start, end);
-	flash_sect_erase(start, end);
-	wait_ms(100);
-	/* strip the header - except for the kernel and ramdisk */
-	if (hdr->ih_type == IH_TYPE_KERNEL) {
-		addr = (char *)hdr;
-		off = sizeof(*hdr);
-		nbytes = sizeof(*hdr) + ntohl(hdr->ih_size);
-	} else {
-		addr = (char *)((char *)hdr + sizeof(*hdr));
-#ifdef AU_UPDATE_TEST
-		/* copy it to where Linux goes */
-		if (idx == IDX_FIRMWARE)
-			start = aufl_layout[1].start;
-#endif
-		off = 0;
-		nbytes = ntohl(hdr->ih_size);
-	}
-
-	/* copy the data from RAM to FLASH */
-	debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes);
-	rc = flash_write(addr, start, nbytes);
-	if (rc != 0) {
-		printf("Flashing failed due to error %d\n", rc);
-		return -1;
-	}
-
-	/* check the dcrc of the copy */
-	if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) {
-		printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]);
-		return -1;
-	}
-
-	/* protect the address range */
-	/* this assumes that ONLY the firmware is protected! */
-	if (idx == IDX_FIRMWARE)
-		flash_sect_protect(1, start, end);
-	return 0;
-}
-
-/*
- * this is called from board_init() after the hardware has been set up
- * and is usable. That seems like a good time to do this.
- * Right now the return value is ignored.
- */
-int do_auto_update(void)
-{
-	block_dev_desc_t *stor_dev;
-	long sz;
-	int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc;
-	char *env;
-	long start, end;
-	char keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
-
-	/*
-	 * Read keypad status
-	 */
-	i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status1, 2);
-	wait_ms(500);
-	i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status2, 2);
-
-	/*
-	 * Check keypad
-	 */
-	if ( !(keypad_status1[0] & KEYPAD_MASK_HI) ||
-	      (keypad_status1[0] != keypad_status2[0])) {
-		return 0;
-	}
-	if ( !(keypad_status1[1] & KEYPAD_MASK_LO) ||
-	      (keypad_status1[1] != keypad_status2[1])) {
-		return 0;
-	}
-	au_usb_stor_curr_dev = -1;
-	/* start USB */
-	if (usb_stop() < 0) {
-		debug ("usb_stop failed\n");
-		return -1;
-	}
-	if (usb_init() < 0) {
-		debug ("usb_init failed\n");
-		return -1;
-	}
-	/*
-	 * check whether a storage device is attached (assume that it's
-	 * a USB memory stick, since nothing else should be attached).
-	 */
-	au_usb_stor_curr_dev = usb_stor_scan(0);
-	if (au_usb_stor_curr_dev == -1) {
-		debug ("No device found. Not initialized?\n");
-		return -1;
-	}
-	/* check whether it has a partition table */
-	stor_dev = get_dev("usb", 0);
-	if (stor_dev == NULL) {
-		debug ("uknown device type\n");
-		return -1;
-	}
-	if (fat_register_device(stor_dev, 1) != 0) {
-		debug ("Unable to use USB %d:%d for fatls\n",
-			au_usb_stor_curr_dev, 1);
-		return -1;
-	}
-	if (file_fat_detectfs() != 0) {
-		debug ("file_fat_detectfs failed\n");
-	}
-
-	/* initialize the array of file names */
-	memset(aufile, 0, sizeof(aufile));
-	aufile[IDX_FIRMWARE] = AU_FIRMWARE;
-	aufile[IDX_KERNEL] = AU_KERNEL;
-	/* initialize the array of flash sizes */
-	memset(ausize, 0, sizeof(ausize));
-	ausize[IDX_FIRMWARE] = (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST;
-	ausize[IDX_KERNEL] = (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST;
-	/*
-	 * now check whether start and end are defined using environment
-	 * variables.
-	 */
-	start = -1;
-	end = 0;
-	env = getenv("firmware_st");
-	if (env != NULL)
-		start = simple_strtoul(env, NULL, 16);
-	env = getenv("firmware_nd");
-	if (env != NULL)
-		end = simple_strtoul(env, NULL, 16);
-	if (start >= 0 && end && end > start) {
-		ausize[IDX_FIRMWARE] = (end + 1) - start;
-		aufl_layout[0].start = start;
-		aufl_layout[0].end = end;
-	}
-	start = -1;
-	end = 0;
-	env = getenv("kernel_st");
-	if (env != NULL)
-		start = simple_strtoul(env, NULL, 16);
-	env = getenv("kernel_nd");
-	if (env != NULL)
-		end = simple_strtoul(env, NULL, 16);
-	if (start >= 0 && end && end > start) {
-		ausize[IDX_KERNEL] = (end + 1) - start;
-		aufl_layout[1].start = start;
-		aufl_layout[1].end = end;
-	}
-	/* make certain that HUSH is runnable */
-	u_boot_hush_start();
-	/* make sure that we see CTRL-C and save the old state */
-	old_ctrlc = disable_ctrlc(0);
-
-	bitmap_first = 0;
-	/* just loop thru all the possible files */
-	for (i = 0; i < AU_MAXFILES; i++) {
-		/* just read the header */
-		sz = file_fat_read(aufile[i], LOAD_ADDR, sizeof(image_header_t));
-		debug ("read %s sz %ld hdr %d\n",
-			aufile[i], sz, sizeof(image_header_t));
-		if (sz <= 0 || sz < sizeof(image_header_t)) {
-			debug ("%s not found\n", aufile[i]);
-			continue;
-		}
-		if (au_check_header_valid(i, sz) < 0) {
-			debug ("%s header not valid\n", aufile[i]);
-			continue;
-		}
-		sz = file_fat_read(aufile[i], LOAD_ADDR, MAX_LOADSZ);
-		debug ("read %s sz %ld hdr %d\n",
-			aufile[i], sz, sizeof(image_header_t));
-		if (sz <= 0 || sz <= sizeof(image_header_t)) {
-			debug ("%s not found\n", aufile[i]);
-			continue;
-		}
-		if (au_check_cksum_valid(i, sz) < 0) {
-			debug ("%s checksum not valid\n", aufile[i]);
-			continue;
-		}
-		/* this is really not a good idea, but it's what the */
-		/* customer wants. */
-		cnt = 0;
-		got_ctrlc = 0;
-		do {
-			res = au_do_update(i, sz);
-			/* let the user break out of the loop */
-			if (ctrlc() || had_ctrlc()) {
-				clear_ctrlc();
-				if (res < 0)
-					got_ctrlc = 1;
-				break;
-			}
-			cnt++;
-#ifdef AU_TEST_ONLY
-		} while (res < 0 && cnt < 3);
-		if (cnt < 3)
-#else
-		} while (res < 0);
-#endif
-	}
-	usb_stop();
-	/* restore the old state */
-	disable_ctrlc(old_ctrlc);
-	return 0;
-}
-#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk
deleted file mode 100644
index d0f9289fe1..0000000000
--- a/board/mcc200/config.mk
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MCC200, PRS200 boards:
-#
-#	Valid values for TEXT_BASE are:
-#
-#	0xFC000000   boot low (standard configuration)
-#	0xFFF00000   boot high
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-## Standard: boot low
-TEXT_BASE = 0xFC000000
-## Boot high
-# TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
deleted file mode 100644
index b2625160a5..0000000000
--- a/board/mcc200/lcd.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lcd.h>
-#include <mpc5xxx.h>
-
-#ifdef CONFIG_LCD
-
-#define SWAPPED_LCD
-/*
- *  The name of the device used for communication
- * with the PSoC.
- */
-#define PSOC_PSC	MPC5XXX_PSC2
-#define PSOC_BAUD	500000UL
-
-#define RTS_ASSERT	1
-#define RTS_NEGATE	0
-#define CTS_ASSERT	1
-#define CTS_NEGATE	0
-
-/*
- * Dimensions in pixels
- */
-#define LCD_WIDTH	160
-#define LCD_HEIGHT	100
-
-/*
- * Dimensions in bytes
- */
-#define LCD_BUF_SIZE	((LCD_WIDTH*LCD_HEIGHT)>>3)
-
-#if LCD_BPP != LCD_MONOCHROME
-#error "MCC200 support only monochrome displays (1 bpp)!"
-#endif
-
-#define PSOC_RETRIES	10	/* each of PSOC_WAIT_TIME */
-#define PSOC_WAIT_TIME	10	/* usec */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * LCD information
- */
-vidinfo_t panel_info = {
-	LCD_WIDTH, LCD_HEIGHT, LCD_BPP
-};
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base;			/* Start of framebuffer memory  */
-void *lcd_console_address;	/* Start of console buffer      */
-
-short console_col = 0;
-short console_row = 0;
-
-/*
- *  The device we use to communicate with PSoC
- */
-int serial_inited = 0;
-
-/*
- * Exported functions
- */
-void lcd_initcolregs (void);
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-
-/*
- *  Imported functions to support the PSoC protocol
- */
-extern int serial_init_dev (unsigned long dev_base);
-extern void serial_setrts_dev (unsigned long dev_base, int s);
-extern int serial_getcts_dev (unsigned long dev_base);
-extern void serial_putc_raw_dev(unsigned long dev_base, const char c);
-
-/*
- *  Just stubs for our driver, needed for compiling compabilty with
- * the common LCD driver code.
- */
-void lcd_initcolregs (void)
-{
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
-}
-
-/*
- * Function sends the contents of the frame-buffer to the LCD
- */
-void lcd_enable (void)
-{
-	int i, retries, fb_size;
-
-	if (!serial_inited) {
-		unsigned long baud;
-
-		baud = gd->baudrate;
-		gd->baudrate = PSOC_BAUD;
-		serial_init_dev(PSOC_PSC);
-		gd->baudrate = baud;
-		serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
-		serial_inited = 1;
-	}
-
-	/*
-	 *  Implement PSoC communication protocol:
-	 * 1. Assert RTS, wait CTS assertion
-	 * 2. Transmit data
-	 * 3. Negate RTS, wait CTS negation
-	 */
-
-	/* 1 */
-	serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
-	for (retries = PSOC_RETRIES; retries; retries--) {
-		if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT)
-			break;
-		udelay (PSOC_WAIT_TIME);
-	}
-	if (!retries) {
-		printf ("%s Error: PSoC doesn't respond on "
-			"RTS ASSERT\n",	__FUNCTION__);
-	}
-
-	/* 2 */
-	fb_size = panel_info.vl_row * (panel_info.vl_col >> 3);
-
-#if !defined(SWAPPED_LCD)
-	for (i=0; i<fb_size; i++) {
-		serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]);
-	}
-#else
-    {
-	int x, y, pwidth;
-	char *p = (char *)lcd_base;
-
-	pwidth = ((panel_info.vl_col+7) >> 3);
-	for (y=0; y<panel_info.vl_row; y++) {
-		i = y * pwidth;
-		for (x=0; x<pwidth; x+=5) {
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F));
-			serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F));
-		}
-	}
-    }
-#endif
-
-	/* 3 */
-	serial_setrts_dev (PSOC_PSC, RTS_NEGATE);
-	for (retries = PSOC_RETRIES; retries; retries--) {
-		if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE)
-			break;
-		udelay (PSOC_WAIT_TIME);
-	}
-	if (!retries) {
-		printf ("%s Error: PSoC doesn't respond on "
-			"RTS NEGATE\n",	__FUNCTION__);
-	}
-
-	return;
-}
-#endif /* CONFIG_LCD */
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
deleted file mode 100644
index 67969a6010..0000000000
--- a/board/mcc200/mcc200.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-
-/* Two MT48LC8M32B2 for 32 MB */
-/* #include "mt48lc8m32b2-6-7.h" */
-
-/* One MT48LC16M32S2 for 64 MB */
-/* #include "mt48lc16m32s2-75.h" */
-#if defined (CONFIG_MCC200_SDRAM)
-#include "mt48lc16m16a2-75.h"
-#else
-#include "mt46v16m16-75.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[];	/* FLASH chips info */
-
-extern int do_auto_update(void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifndef CFG_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	udelay(10);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-	uint svr, pvr;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CFG_RAMBOOT */
-
-	/*
-	 * On MPC5200B we need to set the special configuration delay in the
-	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-	 *
-	 * "The SDelay should be written to a value of 0x00000004. It is
-	 * required to account for changes caused by normal wafer processing
-	 * parameters."
-	 */
-	svr = get_svr();
-	pvr = get_pvr();
-	if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
-		__asm__ volatile ("sync");
-	}
-
-	return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
-#if defined(CONFIG_PRS200)
-	puts ("Board: PRS200\n");
-#else
-	puts ("Board: MCC200\n");
-#endif
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	ulong flash_sup_end, snum;
-
-#ifdef CONFIG_AUTO_UPDATE
-	/* this has priority over all else */
-	do_auto_update();
-#endif
-	/*
-	 * Adjust flash start and offset to detected values
-	 */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Check if boot FLASH isn't max size
-	 */
-	if (gd->bd->bi_flashsize < (0 - CFG_FLASH_BASE)) {
-		/* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(gd->bd->bi_flashstart);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize);
-
-		/*
-		 * Re-check to get correct base address
-		 */
-		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
-
-		/*
-		 * Re-do flash protection upon new addresses
-		 */
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Redundant environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR_REDUND,
-			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-	}
-
-	if (gd->bd->bi_flashsize > (32 << 20)) {
-		/* Unprotect the upper bank of the Flash */
-		*(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6);
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       flash_info[0].start[0] + flash_info[0].size / 2,
-			       (flash_info[0].start[0] - 1) + flash_info[0].size,
-			       &flash_info[0]);
-		*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
-		printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
-		flash_info[0].size = 32 << 20;
-		for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
-			flash_info[0].start[snum] < flash_sup_end;
-			snum++);
-		flash_info[0].sector_count = snum;
-	}
-
-	return (0);
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
-
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
-extern void doc_probe (ulong physadr);
-void doc_init (void)
-{
-	doc_probe (CFG_DOC_BASE);
-}
-#endif
diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h
deleted file mode 100644
index f650faaa10..0000000000
--- a/board/mcc200/mt46v16m16-75.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h
deleted file mode 100644
index ffdf0396a5..0000000000
--- a/board/mcc200/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xC2222600
-#define SDRAM_CONFIG2	0x88B70004
-#define SDRAM_ADDRSEL	0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h
deleted file mode 100644
index ffdf0396a5..0000000000
--- a/board/mcc200/mt48lc16m32s2-75.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xC2222600
-#define SDRAM_CONFIG2	0x88B70004
-#define SDRAM_ADDRSEL	0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/mcc200/mt48lc8m32b2-6-7.h b/board/mcc200/mt48lc8m32b2-6-7.h
deleted file mode 100644
index 13aebbd8af..0000000000
--- a/board/mcc200/mt48lc8m32b2-6-7.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Configuration Registers for the MT48LC8M32B2 SDRAM on the MPC5200 platform
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE	0x008d0000 /* CL-3 BURST-8 -> Mode Register MBAR + 0x0100 */
-#define SDRAM_CONTROL	0x504f0000 /* Control Register MBAR + 0x0104 */
-#define SDRAM_CONFIG1	0xc2222900 /* Delays between commands -> Configuration Register 1 MBAR + 0x0108 */
-#define SDRAM_CONFIG2	0x88c70000 /* Delays between commands -> Configuration Register 2 MBAR + 0x010C */
diff --git a/board/mcc200/u-boot.lds b/board/mcc200/u-boot.lds
deleted file mode 100644
index 4fdea6b783..0000000000
--- a/board/mcc200/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile
deleted file mode 100644
index 5ec7a871d4..0000000000
--- a/board/mpc8349emds/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o pci.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8349emds/config.mk b/board/mpc8349emds/config.mk
deleted file mode 100644
index edf64d1508..0000000000
--- a/board/mpc8349emds/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MPC8349EMDS
-#
-
-TEXT_BASE  =   0xFE000000
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
deleted file mode 100644
index 873bdd01cd..0000000000
--- a/board/mpc8349emds/mpc8349emds.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#include <spd.h>
-#include <miiphy.h>
-#include <command.h>
-#if defined(CONFIG_SPD_EEPROM)
-#include <spd_sdram.h>
-#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-int fixed_sdram(void);
-void sdram_init(void);
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
-void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-int board_early_init_f (void)
-{
-	volatile u8* bcsr = (volatile u8*)CFG_BCSR;
-
-	/* Enable flash write */
-	bcsr[1] &= ~0x01;
-
-#ifdef CFG_USE_MPC834XSYS_USB_PHY
-	/* Use USB PHY on SYS board */
-	bcsr[5] |= 0x02;
-#endif
-
-	return 0;
-}
-
-#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
-
-long int initdram (int board_type)
-{
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
-	u32 msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -1;
-
-	puts("Initializing\n");
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram();
-#else
-	msize = fixed_sdram();
-#endif
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	sdram_init();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-	puts("   DDR RAM: ");
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	return (msize * 1024 * 1024);
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
-	u32 msize = 0;
-	u32 ddr_size;
-	u32 ddr_size_log2;
-
-	msize = CFG_DDR_SIZE;
-	for (ddr_size = msize << 20, ddr_size_log2 = 0;
-	     (ddr_size > 1);
-	     ddr_size = ddr_size>>1, ddr_size_log2++) {
-		if (ddr_size & 1) {
-			return -1;
-		}
-	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
-	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-
-#if (CFG_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-	im->ddr.csbnds[2].csbnds = 0x0000000f;
-	im->ddr.cs_config[2] = CFG_DDR_CONFIG;
-
-	/* currently we use only one CS, so disable the other banks */
-	im->ddr.cs_config[0] = 0;
-	im->ddr.cs_config[1] = 0;
-	im->ddr.cs_config[3] = 0;
-
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-
-	im->ddr.sdram_cfg =
-		SDRAM_CFG_SREN
-#if defined(CONFIG_DDR_2T_TIMING)
-		| SDRAM_CFG_2T_EN
-#endif
-		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
-#if defined (CONFIG_DDR_32BIT)
-	/* for 32-bit mode burst length is 8 */
-	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
-#endif
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	udelay(200);
-
-	/* enable DDR controller */
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	return msize;
-}
-#endif/*!CFG_SPD_EEPROM*/
-
-
-int checkboard (void)
-{
-	puts("Board: Freescale MPC8349EMDS\n");
-	return 0;
-}
-
-/*
- * if MPC8349EMDS is soldered with SDRAM
- */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc= &immap->lbus;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-
-	puts("\n   SDRAM on Local Bus: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
-	 */
-
-	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode Register.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
-
-	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
-	asm("sync");
-	/*1 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*2 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*3 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*4 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*5 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*6 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*7 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*8 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-}
-#else
-void sdram_init(void)
-{
-	put("SDRAM on Local Bus is NOT available!\n");
-}
-#endif
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-			ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-			ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-			ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-		ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf("  Data Beat Number: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-			ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr, count, val64;
-	register u64 *i;
-
-	if (argc > 4) {
-		printf ("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-
-	if (argc == 4) {
-		if (strcmp(argv[1], "test") == 0) {
-			addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32)addr % 8) {
-				printf("Address not alligned on double word boundary\n");
-				return 1;
-			}
-
-			disable_interrupts();
-			icache_disable();
-
-			for (i = addr; i < addr + count; i++) {
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* write memory location injecting errors */
-				*i = 0x1122334455667788ULL;
-				__asm__ __volatile__ ("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* read data, this generates ECC error */
-				val64 = *i;
-				__asm__ __volatile__ ("sync");
-
-				/* disable errors for ECC */
-				ddr->err_disable |= ~ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* re-initialize memory, write the location again
-				 * NOT injecting errors this time */
-				*i = 0xcafecafecafecafeULL;
-				__asm__ __volatile__ ("sync");
-
-				/* enable errors for ECC */
-				ddr->err_disable &= ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-			}
-
-			icache_enable();
-			enable_interrupts();
-
-			return 0;
-		}
-	}
-
-	printf ("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(
-	ecc,     4,     0,      do_ecc,
-	"ecc     - support for DDR ECC features\n",
-	"status              - print out status info\n"
-	"ecc captureclear        - clear capture regs data\n"
-	"ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	"ecc sbethr <val>        - set Single-Bit Threshold\n"
-	"ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	"  [-|+]sbe - Single-Bit Error\n"
-	"  [-|+]mbe - Multiple-Bit Error\n"
-	"  [-|+]mse - Memory Select Error\n"
-	"  [-|+]all - all errors\n"
-	"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	"  mme - Multiple Memory Errors\n"
-	"  sbe - Single-Bit Error\n"
-	"  mbe - Multiple-Bit Error\n"
-	"  mse - Memory Select Error\n"
-	"  all - all errors\n"
-	"ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	"ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	"ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	"ecc inject <en|dis>    - enable/disable error injection\n"
-	"ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	"ecc test <addr> <cnt>  - test mem region:\n"
-	"  - enables injects\n"
-	"  - writes pattern injecting errors\n"
-	"  - disables injects\n"
-	"  - reads pattern back, generates error\n"
-	"  - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-}
-#endif
diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c
deleted file mode 100644
index d6a12b82a4..0000000000
--- a/board/mpc8349emds/pci.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <asm/mmu.h>
-#include <common.h>
-#include <asm/global_data.h>
-#include <pci.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_PCI
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc8349emds_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
- 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-		}
-	},
-	{}
-};
-#endif
-
-static struct pci_controller pci_hose[] = {
-       {
-#ifndef CONFIG_PCI_PNP
-       config_table:pci_mpc8349emds_config_table,
-#endif
-       },
-       {
-#ifndef CONFIG_PCI_PNP
-       config_table:pci_mpc8349emds_config_table,
-#endif
-       }
-};
-
-/**************************************************************************
- *
- * pib_init() -- initialize the PCA9555PW IO expander on the PIB board
- *
- */
-void
-pib_init(void)
-{
-	u8 val8, orig_i2c_bus;
-	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-#if defined(PCI_64BIT)
-	val8 = 0xf4;	/* PMC2:PCI1/64-bit */
-#elif defined(PCI_ALL_PCI1)
-	val8 = 0xf3;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
-#elif defined(PCI_ONE_PCI1)
-	val8 = 0xf9;	/* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
-#else
-	val8 = 0xf5;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
-#endif
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-#if defined(PCI_64BIT)
-	printf("PCI1: 64-bit on PMC2\n");
-#elif defined(PCI_ALL_PCI1)
-	printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
-#elif defined(PCI_ONE_PCI1)
-	printf("PCI1: 32-bit on PMC1\n");
-	printf("PCI2: 32-bit on PMC2, PMC3\n");
-#else
-	printf("PCI1: 32-bit on PMC1, PMC2\n");
-	printf("PCI2: 32-bit on PMC3\n");
-#endif
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-}
-
-/**************************************************************************
- * pci_init_board()
- *
- * NOTICE: PCI2 is not currently supported
- *
- */
-void
-pci_init_board(void)
-{
-	volatile immap_t *	immr;
-	volatile clk83xx_t *	clk;
-	volatile law83xx_t *	pci_law;
-	volatile pot83xx_t *	pci_pot;
-	volatile pcictrl83xx_t *	pci_ctrl;
-	volatile pciconf83xx_t *	pci_conf;
-	u16 reg16;
-	u32 reg32;
-	u32 dev;
-	struct	pci_controller * hose;
-
-	immr = (immap_t *)CFG_IMMR;
-	clk = (clk83xx_t *)&immr->clk;
-	pci_law = immr->sysconf.pcilaw;
-	pci_pot = immr->ios.pot;
-	pci_ctrl = immr->pci_ctrl;
-	pci_conf = immr->pci_conf;
-
-	hose = &pci_hose[0];
-
-	pib_init();
-
-	/*
-	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
-	 */
-
-	reg32 = clk->occr;
-	udelay(2000);
-	clk->occr = 0xff000000;
-	udelay(2000);
-
-	/*
-	 * Release PCI RST Output signal
-	 */
-	pci_ctrl[0].gcr = 0;
-	udelay(2000);
-	pci_ctrl[0].gcr = 1;
-
-#ifdef CONFIG_MPC83XX_PCI2
-	pci_ctrl[1].gcr = 0;
-	udelay(2000);
-	pci_ctrl[1].gcr = 1;
-#endif
-
-	/* We need to wait at least a 1sec based on PCI specs */
-	{
-		int i;
-
-		for (i = 0; i < 1000; ++i)
-			udelay (1000);
-	}
-
-	/*
-	 * Configure PCI Local Access Windows
-	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
-
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI1 mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
-
-	/* PCI1 mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-
-	/* we need RAM mapped to PCI space for the devices to
-	 * access main memory */
-	pci_ctrl[0].pitar1 = 0x0;
-	pci_ctrl[0].pibar1 = 0x0;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	/* PCI memory prefetch space */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE,
-		       PCI_REGION_MEM|PCI_REGION_PREFETCH);
-
-	/* PCI memory space */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_MMIO_BASE,
-		       CFG_PCI1_MMIO_PHYS,
-		       CFG_PCI1_MMIO_SIZE,
-		       PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS,
-		       CFG_PCI1_IO_SIZE,
-		       PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose->regions + 3,
-		       CONFIG_PCI_SYS_MEM_BUS,
-		       CONFIG_PCI_SYS_MEM_PHYS,
-		       gd->ram_size,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose->region_count = 4;
-
-	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8300),
-			   (CFG_IMMR+0x8304));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-
-#ifdef CONFIG_MPC83XX_PCI2
-	hose = &pci_hose[1];
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI2 mem space - prefetch */
-	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/* PCI2 IO space */
-	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
-
-	/* PCI2 mmio - non-prefetch mem space */
-	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-
-	/* we need RAM mapped to PCI space for the devices to
-	 * access main memory */
-	pci_ctrl[1].pitar1 = 0x0;
-	pci_ctrl[1].pibar1 = 0x0;
-	pci_ctrl[1].piebar1 = 0x0;
-	pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
-
-	hose->first_busno = pci_hose[0].last_busno + 1;
-	hose->last_busno = 0xff;
-
-	/* PCI memory prefetch space */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
-		       PCI_REGION_MEM|PCI_REGION_PREFETCH);
-
-	/* PCI memory space */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MMIO_BASE,
-		       CFG_PCI2_MMIO_PHYS,
-		       CFG_PCI2_MMIO_SIZE,
-		       PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
-		       PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose->regions + 3,
-		       CONFIG_PCI_SYS_MEM_BUS,
-		       CONFIG_PCI_SYS_MEM_PHYS,
-		       gd->ram_size,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose->region_count = 4;
-
-	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8380),
-			   (CFG_IMMR+0x8384));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-#endif
-
-}
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-       	u32 *p;
-       	int len;
-
-       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
-       	if (p != NULL) {
-		p[0] = pci_hose[0].first_busno;
-		p[1] = pci_hose[0].last_busno;
-       	}
-
-#ifdef CONFIG_MPC83XX_PCI2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[1].first_busno;
-		p[1] = pci_hose[1].last_busno;
-	}
-#endif
-}
-#endif /* CONFIG_OF_FLAT_TREE */
-#endif /* CONFIG_PCI */
diff --git a/board/mpc8349emds/u-boot.lds b/board/mpc8349emds/u-boot.lds
deleted file mode 100644
index 937c87a27c..0000000000
--- a/board/mpc8349emds/u-boot.lds
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc83xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile
deleted file mode 100644
index 31bcdb8642..0000000000
--- a/board/mpc8349itx/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o pci.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) crv $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk
deleted file mode 100644
index 2e113118bd..0000000000
--- a/board/mpc8349itx/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MPC8349ITX
-#
-
-TEXT_BASE  =   0xFEF00000
-
-ifneq ($(OBJTREE),$(SRCTREE))
-# We are building u-boot in a separate directory, use generated
-# .lds script from OBJTREE directory.
-LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
-endif
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c
deleted file mode 100644
index 4838e707f0..0000000000
--- a/board/mpc8349itx/mpc8349itx.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <i2c.h>
-#include <spd.h>
-#include <miiphy.h>
-
-#ifdef CONFIG_PCI
-#include <asm/mpc8349_pci.h>
-#include <pci.h>
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-#include <spd_sdram.h>
-#else
-#include <asm/mmu.h>
-#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-#ifndef CONFIG_SPD_EEPROM
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 ddr_size;		/* The size of RAM, in bytes */
-	u32 ddr_size_log2 = 0;
-
-	for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
-		if (ddr_size & 1) {
-			return -1;
-		}
-		ddr_size_log2++;
-	}
-
-	im->sysconf.ddrlaw[0].ar =
-	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
-
-	/* Only one CS0 for DDR */
-	im->ddr.csbnds[0].csbnds = 0x0000000f;
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
-
-	debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
-
-	debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
-	debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
-
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
-	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR;
-	im->ddr.sdram_mode =
-	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
-	im->ddr.sdram_interval =
-	    (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
-						       SDRAM_INTERVAL_BSTOPRE_SHIFT);
-	im->ddr.sdram_clk_cntl =
-	    DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
-
-	udelay(200);
-
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
-	debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
-	debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
-	debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
-	debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
-	debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
-
-	return CFG_DDR_SIZE;
-}
-#endif
-
-#ifdef CONFIG_PCI
-/*
- * Initialize PCI Devices, report devices found
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
-	{
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 0x0f,
-	 PCI_ANY_ID,
-	 pci_cfgfunc_config_device,
-	 {
-	  PCI_ENET0_IOADDR,
-	  PCI_ENET0_MEMADDR,
-	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
-	 },
-	{}
-}
-#endif
-
-volatile static struct pci_controller hose[] = {
-	{
-#ifndef CONFIG_PCI_PNP
-	      config_table:pci_mpc83xxmitx_config_table,
-#endif
-	 },
-	{
-#ifndef CONFIG_PCI_PNP
-	      config_table:pci_mpc83xxmitx_config_table,
-#endif
-	 }
-};
-#endif				/* CONFIG_PCI */
-
-/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. */
-
-void sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbc = &immap->lbus;
-
-#if defined(CFG_BR2_PRELIM) \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM) \
-	&& !defined(CONFIG_COMPACT_FLASH)
-
-	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
-
-	puts("\n   SDRAM on Local Bus: ");
-	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
-	 */
-
-	/*setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode register.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* 0x40636733; normal operation */
-
-	lbc->lsdmr = CFG_LBC_LSDMR_1;	/*0x68636733; precharge all the banks */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_2;	/*0x48636733; auto refresh */
-	asm("sync");
-	*sdram_addr = 0xff; /*1 time*/
-	udelay(100);
-	*sdram_addr = 0xff; /*2 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*3 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*4 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*5 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*6 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*7 times*/
-	udelay(100);
-	*sdram_addr = 0xff; /*8 times*/
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_4;	/*0x58636733;mode register write operation */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_5;	/*0x40636733;normal operation */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-#else
-	puts("SDRAM on Local Bus is NOT available!\n");
-
-#ifdef CFG_BR2_PRELIM
-	lbc->bank[2].br = CFG_BR2_PRELIM;
-	lbc->bank[2].or = CFG_OR2_PRELIM;
-#endif
-
-#ifdef CFG_BR3_PRELIM
-	lbc->bank[3].br = CFG_BR3_PRELIM;
-	lbc->bank[3].or = CFG_OR3_PRELIM;
-#endif
-#endif
-}
-
-long int initdram(int board_type)
-{
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = 0;
-#ifdef CONFIG_DDR_ECC
-	volatile ddr83xx_t *ddr = &im->ddr;
-#endif
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
-		return -1;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
-#ifdef CONFIG_SPD_EEPROM
-	msize = spd_sdram();
-#else
-	msize = fixed_sdram();
-#endif
-
-#ifdef CONFIG_DDR_ECC
-	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
-		/* Unlike every other board, on the 83xx spd_sdram() returns
-		   megabytes instead of just bytes.  That's why we need to
-		   multiple by 1MB when calling ddr_enable_ecc(). */
-		ddr_enable_ecc(msize * 1048576);
-#endif
-
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	sdram_init();
-	puts("   DDR RAM: ");
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	puts("Board: Freescale MPC8349E-mITX\n");
-
-	return 0;
-}
-
-/*
- * Implement a work-around for a hardware problem with compact
- * flash.
- *
- * Program the UPM if compact flash is enabled.
- */
-int misc_init_f(void)
-{
-	volatile u32 *vsc7385_cpuctrl;
-
-	/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register.  The power up
-	   default of VSC7385 L1_IRQ and L2_IRQ requests are active high.  That
-	   means it is 0 when the IRQ is not active.  This makes the wire-AND
-	   logic always assert IRQ7 to CPU even if there is no request from the
-	   switch.  Since the compact flash and the switch share the same IRQ,
-	   the Linux kernel will think that the compact flash is requesting irq
-	   and get stuck when it tries to clear the IRQ.  Thus we need to set
-	   the L2_IRQ0 and L2_IRQ1 to active low.
-
-	   The following code sets the L1_IRQ and L2_IRQ polarity to active low.
-	   Without this code, compact flash will not work in Linux because
-	   unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
-	   don't enable compact flash for U-Boot.
-	 */
-
-	vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
-	*vsc7385_cpuctrl |= 0x0c;
-
-#ifdef CONFIG_COMPACT_FLASH
-	/* UPM Table Configuration Code */
-	static uint UPMATable[] = {
-		0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
-		0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-		0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
-		0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
-	};
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbus = &immap->lbus;
-
-	lbus->bank[3].br = CFG_BR3_PRELIM;
-	lbus->bank[3].or = CFG_OR3_PRELIM;
-
-	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
-	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
-	 */
-	lbus->mamr = 0x08404440;
-
-	upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
-
-	puts("UPMA:  Configured for compact flash\n");
-#endif
-
-	return 0;
-}
-
-/*
- * Make sure the EEPROM has the HRCW correctly programmed.
- * Make sure the RTC is correctly programmed.
- *
- * The MPC8349E-mITX can be configured to load the HRCW from
- * EEPROM instead of flash.  This is controlled via jumpers
- * LGPL0, 1, and 3.  Normally, these jumpers are set to 000 (all
- * jumpered), but if they're set to 001 or 010, then the HRCW is
- * read from the "I2C EEPROM".
- *
- * This function makes sure that the I2C EEPROM is programmed
- * correctly.
- */
-int misc_init_r(void)
-{
-	int rc = 0;
-
-#ifdef CONFIG_HARD_I2C
-
-	unsigned int orig_bus = i2c_get_bus_num();;
-	u8 i2c_data;
-
-#ifdef CFG_I2C_RTC_ADDR
-	u8 ds1339_data[17];
-#endif
-
-#ifdef CFG_I2C_EEPROM_ADDR
-	static u8 eeprom_data[] =	/* HRCW data */
-	{
-		0xaa, 0x55, 0xaa,
-		0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00,
-		0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00,
-	};
-
-	u8 data[sizeof(eeprom_data)];
-#endif
-
-	printf("Board revision: ");
-	i2c_set_bus_num(1);
-	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
-		printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
-	else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
-		printf("%u.%u (PCF8475)\n",  (i2c_data & 0x02) >> 1, i2c_data & 0x01);
-	else {
-		printf("Unknown\n");
-		rc = 1;
-	}
-
-#ifdef CFG_I2C_EEPROM_ADDR
-	i2c_set_bus_num(0);
-
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
-		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
-			if (i2c_write
-			    (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
-			     sizeof(eeprom_data)) != 0) {
-				puts("Failure writing the HRCW to EEPROM via I2C.\n");
-				rc = 1;
-			}
-		}
-	} else {
-		puts("Failure reading the HRCW from EEPROM via I2C.\n");
-		rc = 1;
-	}
-#endif
-
-#ifdef CFG_I2C_RTC_ADDR
-	i2c_set_bus_num(1);
-
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
-	    == 0) {
-
-		/* Work-around for MPC8349E-mITX bug #13601.
-		   If the RTC does not contain valid register values, the DS1339
-		   Linux driver will not work.
-		 */
-
-		/* Make sure status register bits 6-2 are zero */
-		ds1339_data[0x0f] &= ~0x7c;
-
-		/* Check for a valid day register value */
-		ds1339_data[0x03] &= ~0xf8;
-		if (ds1339_data[0x03] == 0) {
-			ds1339_data[0x03] = 1;
-		}
-
-		/* Check for a valid date register value */
-		ds1339_data[0x04] &= ~0xc0;
-		if ((ds1339_data[0x04] == 0) ||
-		    ((ds1339_data[0x04] & 0x0f) > 9) ||
-		    (ds1339_data[0x04] >= 0x32)) {
-			ds1339_data[0x04] = 1;
-		}
-
-		/* Check for a valid month register value */
-		ds1339_data[0x05] &= ~0x60;
-
-		if ((ds1339_data[0x05] == 0) ||
-		    ((ds1339_data[0x05] & 0x0f) > 9) ||
-		    ((ds1339_data[0x05] >= 0x13)
-		     && (ds1339_data[0x05] <= 0x19))) {
-			ds1339_data[0x05] = 1;
-		}
-
-		/* Enable Oscillator and rate select */
-		ds1339_data[0x0e] = 0x1c;
-
-		/* Work-around for MPC8349E-mITX bug #13330.
-		   Ensure that the RTC control register contains the value 0x1c.
-		   This affects SATA performance.
-		 */
-
-		if (i2c_write
-		    (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
-		     sizeof(ds1339_data))) {
-			puts("Failure writing to the RTC via I2C.\n");
-			rc = 1;
-		}
-	} else {
-		puts("Failure reading from the RTC via I2C.\n");
-		rc = 1;
-	}
-#endif
-
-	i2c_set_bus_num(orig_bus);
-#endif
-
-	return rc;
-}
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-}
-#endif
diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c
deleted file mode 100644
index e81ad27356..0000000000
--- a/board/mpc8349itx/pci.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/mmu.h>
-#include <asm/global_data.h>
-#include <pci.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc8349itx_config_table[] = {
-	{
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER,
-	 PCI_ANY_ID,
-	 pci_cfgfunc_config_device,
-	 {
-	  PCI_ENET0_IOADDR,
-	  PCI_ENET0_MEMADDR,
-	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
-	 },
-	{}
-};
-#endif
-
-static struct pci_controller pci_hose[] = {
-	{
-#ifndef CONFIG_PCI_PNP
-	      config_table:pci_mpc8349itx_config_table,
-#endif
-	 },
-	{
-#ifndef CONFIG_PCI_PNP
-	      config_table:pci_mpc8349itx_config_table,
-#endif
-	 }
-};
-
-/**************************************************************************
- * pci_init_board()
- *
- * NOTICE: PCI2 is not currently supported
- *
- */
-void pci_init_board(void)
-{
-	volatile immap_t *immr;
-	volatile clk83xx_t *clk;
-	volatile law83xx_t *pci_law;
-	volatile pot83xx_t *pci_pot;
-	volatile pcictrl83xx_t *pci_ctrl;
-	volatile pciconf83xx_t *pci_conf;
-	u8 reg8;
-	u16 reg16;
-	u32 reg32;
-	u32 dev;
-	struct pci_controller *hose;
-
-	immr = (immap_t *) CFG_IMMR;
-	clk = (clk83xx_t *) & immr->clk;
-	pci_law = immr->sysconf.pcilaw;
-	pci_pot = immr->ios.pot;
-	pci_ctrl = immr->pci_ctrl;
-	pci_conf = immr->pci_conf;
-
-	hose = &pci_hose[0];
-
-	/*
-	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
-	 */
-
-	reg32 = clk->occr;
-	udelay(2000);
-
-#ifdef CONFIG_HARD_I2C
-	i2c_set_bus_num(1);
-	/* Read the PCI_M66EN jumper setting */
-	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
-	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
-		if (reg8 & I2C_8574_PCI66)
-			clk->occr = 0xff000000;	/* 66 MHz PCI */
-		else
-			clk->occr = 0xff600001;	/* 33 MHz PCI */
-	} else {
-		clk->occr = 0xff600001;	/* 33 MHz PCI */
-	}
-#else
-	clk->occr = 0xff000000;	/* 66 MHz PCI */
-#endif
-
-	udelay(2000);
-
-	/*
-	 * Release PCI RST Output signal
-	 */
-	pci_ctrl[0].gcr = 0;
-	udelay(2000);
-	pci_ctrl[0].gcr = 1;
-
-#ifdef CONFIG_MPC83XX_PCI2
-	pci_ctrl[1].gcr = 0;
-	udelay(2000);
-	pci_ctrl[1].gcr = 1;
-#endif
-
-	/* We need to wait at least a 1sec based on PCI specs */
-	{
-		int i;
-
-		for (i = 0; i < 1000; i++)
-			udelay(1000);
-	}
-
-	/*
-	 * Configure PCI Local Access Windows
-	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
-
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI1 mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;
-
-	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
-
-	/* PCI1 mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-
-	/* we need RAM mapped to PCI space for the devices to
-	 * access main memory */
-	pci_ctrl[0].pitar1 = 0x0;
-	pci_ctrl[0].pibar1 = 0x0;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-	    PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	/* PCI memory prefetch space */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
-
-	/* PCI memory space */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_MMIO_BASE,
-		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose->regions + 3,
-		       CONFIG_PCI_SYS_MEM_BUS,
-		       CONFIG_PCI_SYS_MEM_PHYS,
-		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose->region_count = 4;
-
-	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-
-#ifdef CONFIG_MPC83XX_PCI2
-	hose = &pci_hose[1];
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI2 mem space - prefetch */
-	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;
-
-	/* PCI2 IO space */
-	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;
-
-	/* PCI2 mmio - non-prefetch mem space */
-	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-
-	/* we need RAM mapped to PCI space for the devices to
-	 * access main memory */
-	pci_ctrl[1].pitar1 = 0x0;
-	pci_ctrl[1].pibar1 = 0x0;
-	pci_ctrl[1].piebar1 = 0x0;
-	pci_ctrl[1].piwar1 =
-	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
-	    (__ilog2(gd->ram_size) - 1);
-
-	hose->first_busno = pci_hose[0].last_busno + 1;
-	hose->last_busno = 0xff;
-
-	/* PCI memory prefetch space */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
-
-	/* PCI memory space */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MMIO_BASE,
-		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose->regions + 3,
-		       CONFIG_PCI_SYS_MEM_BUS,
-		       CONFIG_PCI_SYS_MEM_PHYS,
-		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose->region_count = 4;
-
-	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-
-#endif				/* CONFIG_PCI */
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-       	u32 *p;
-       	int len;
-
-       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
-       	if (p != NULL) {
-		p[0] = pci_hose[0].first_busno;
-		p[1] = pci_hose[0].last_busno;
-       	}
-
-#ifdef CONFIG_MPC83XX_PCI2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[1].first_busno;
-		p[1] = pci_hose[1].last_busno;
-	}
-#endif
-}
-#endif /* CONFIG_OF_FLAT_TREE */
diff --git a/board/mpc8349itx/u-boot.lds b/board/mpc8349itx/u-boot.lds
deleted file mode 100644
index f044c0f00e..0000000000
--- a/board/mpc8349itx/u-boot.lds
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc83xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile
deleted file mode 100644
index 5ec7a871d4..0000000000
--- a/board/mpc8360emds/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o pci.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
deleted file mode 100644
index 9ace8860cf..0000000000
--- a/board/mpc8360emds/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MPC8360EMDS
-#
-
-TEXT_BASE = 0xFE000000
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
deleted file mode 100644
index ddc1047c61..0000000000
--- a/board/mpc8360emds/mpc8360emds.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on board/mpc8349emds/mpc8349emds.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <i2c.h>
-#include <spd.h>
-#include <miiphy.h>
-#include <command.h>
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#endif
-#if defined(CONFIG_SPD_EEPROM)
-#include <spd_sdram.h>
-#else
-#include <asm/mmu.h>
-#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-const qe_iop_conf_t qe_iop_conf_tab[] = {
-	/* GETH1 */
-	{0,  3, 1, 0, 1}, /* TxD0 */
-	{0,  4, 1, 0, 1}, /* TxD1 */
-	{0,  5, 1, 0, 1}, /* TxD2 */
-	{0,  6, 1, 0, 1}, /* TxD3 */
-	{1,  6, 1, 0, 3}, /* TxD4 */
-	{1,  7, 1, 0, 1}, /* TxD5 */
-	{1,  9, 1, 0, 2}, /* TxD6 */
-	{1, 10, 1, 0, 2}, /* TxD7 */
-	{0,  9, 2, 0, 1}, /* RxD0 */
-	{0, 10, 2, 0, 1}, /* RxD1 */
-	{0, 11, 2, 0, 1}, /* RxD2 */
-	{0, 12, 2, 0, 1}, /* RxD3 */
-	{0, 13, 2, 0, 1}, /* RxD4 */
-	{1,  1, 2, 0, 2}, /* RxD5 */
-	{1,  0, 2, 0, 2}, /* RxD6 */
-	{1,  4, 2, 0, 2}, /* RxD7 */
-	{0,  7, 1, 0, 1}, /* TX_EN */
-	{0,  8, 1, 0, 1}, /* TX_ER */
-	{0, 15, 2, 0, 1}, /* RX_DV */
-	{0, 16, 2, 0, 1}, /* RX_ER */
-	{0,  0, 2, 0, 1}, /* RX_CLK */
-	{2,  9, 1, 0, 3}, /* GTX_CLK - CLK10 */
-	{2,  8, 2, 0, 1}, /* GTX125 - CLK9 */
-	/* GETH2 */
-	{0, 17, 1, 0, 1}, /* TxD0 */
-	{0, 18, 1, 0, 1}, /* TxD1 */
-	{0, 19, 1, 0, 1}, /* TxD2 */
-	{0, 20, 1, 0, 1}, /* TxD3 */
-	{1,  2, 1, 0, 1}, /* TxD4 */
-	{1,  3, 1, 0, 2}, /* TxD5 */
-	{1,  5, 1, 0, 3}, /* TxD6 */
-	{1,  8, 1, 0, 3}, /* TxD7 */
-	{0, 23, 2, 0, 1}, /* RxD0 */
-	{0, 24, 2, 0, 1}, /* RxD1 */
-	{0, 25, 2, 0, 1}, /* RxD2 */
-	{0, 26, 2, 0, 1}, /* RxD3 */
-	{0, 27, 2, 0, 1}, /* RxD4 */
-	{1, 12, 2, 0, 2}, /* RxD5 */
-	{1, 13, 2, 0, 3}, /* RxD6 */
-	{1, 11, 2, 0, 2}, /* RxD7 */
-	{0, 21, 1, 0, 1}, /* TX_EN */
-	{0, 22, 1, 0, 1}, /* TX_ER */
-	{0, 29, 2, 0, 1}, /* RX_DV */
-	{0, 30, 2, 0, 1}, /* RX_ER */
-	{0, 31, 2, 0, 1}, /* RX_CLK */
-	{2,  2, 1, 0, 2}, /* GTX_CLK = CLK10 */
-	{2,  3, 2, 0, 1}, /* GTX125 - CLK4 */
-
-	{0,  1, 3, 0, 2}, /* MDIO */
-	{0,  2, 1, 0, 1}, /* MDC */
-
-	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
-};
-
-int board_early_init_f(void)
-{
-	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
-
-	/* Enable flash write */
-	bcsr[0xa] &= ~0x04;
-
-	return 0;
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-int fixed_sdram(void);
-void sdram_init(void);
-
-long int initdram(int board_type)
-{
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
-		return -1;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram();
-#else
-	msize = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
-	/*
-	 * Initialize DDR ECC byte
-	 */
-	ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	sdram_init();
-	puts("   DDR RAM: ");
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	return (msize * 1024 * 1024);
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = 0;
-	u32 ddr_size;
-	u32 ddr_size_log2;
-
-	msize = CFG_DDR_SIZE;
-	for (ddr_size = msize << 20, ddr_size_log2 = 0;
-	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
-		if (ddr_size & 1) {
-			return -1;
-		}
-	}
-	im->sysconf.ddrlaw[0].ar =
-	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-	im->ddr.csbnds[0].csbnds = 0x00000007;
-	im->ddr.csbnds[1].csbnds = 0x0008000f;
-
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
-	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
-
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.sdram_cfg = CFG_DDR_CONTROL;
-
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	udelay(200);
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
-	return msize;
-}
-#endif				/*!CFG_SPD_EEPROM */
-
-int checkboard(void)
-{
-	puts("Board: Freescale MPC8360EMDS\n");
-	return 0;
-}
-
-/*
- * if MPC8360EMDS is soldered with SDRAM
- */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbc = &immap->lbus;
-	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
-
-	puts("\n   SDRAM on Local Bus: ");
-	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
-	 */
-	/*setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode Register.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* Normal Operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;	/* Precharge All Banks */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/*
-	 * We need do 8 times auto refresh operation.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
-	asm("sync");
-	*sdram_addr = 0xff;	/* 1 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 2 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 3 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 4 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 5 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 6 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 7 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 8 times */
-	udelay(100);
-
-	/* Mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	*(sdram_addr + 0xcc) = 0xff;
-	udelay(100);
-
-	/* Normal operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-}
-#else
-void sdram_init(void)
-{
-	puts("SDRAM on Local Bus is NOT available!\n");
-}
-#endif
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n",
-	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-	       ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-	       ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf(" Data Beat Number: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
-	       ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
-	       ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
-	       ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
-	       ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr;
-	u32 count;
-	register u64 *i;
-	u32 ret[2];
-	u32 pattern[2];
-	u32 writeback[2];
-
-	/* The pattern is written into memory to generate error */
-	pattern[0] = 0xfedcba98UL;
-	pattern[1] = 0x76543210UL;
-
-	/* After injecting error, re-initialize the memory with the value */
-	writeback[0] = 0x01234567UL;
-	writeback[1] = 0x89abcdefUL;
-
-	if (argc > 4) {
-		printf("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					 ECC_ERROR_DISABLE_MBED |
-					 ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, "
-				       "should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-	if (argc == 4) {
-		if (strcmp(argv[1], "testdw") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				ppcDWstore((u32 *) i, pattern);
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* read data, this generates ECC error */
-				ppcDWload((u32 *) i, ret);
-				__asm__ __volatile__("sync");
-
-				/* re-initialize memory, double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-		if (strcmp(argv[1], "testword") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				*(u32 *) i = 0xfedcba98UL;
-				__asm__ __volatile__("sync");
-
-				/* sub double word write,
-				 * bus will read-modify-write,
-				 * generates ECC error */
-				*((u32 *) i + 1) = 0x76543210UL;
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* re-initialize memory,
-				 * double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-	}
-	printf("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
-	   "ecc     - support for DDR ECC features\n",
-	   "status              - print out status info\n"
-	   "ecc captureclear        - clear capture regs data\n"
-	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
-	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	   "  [-|+]sbe - Single-Bit Error\n"
-	   "  [-|+]mbe - Multiple-Bit Error\n"
-	   "  [-|+]mse - Memory Select Error\n"
-	   "  [-|+]all - all errors\n"
-	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	   "  mme - Multiple Memory Errors\n"
-	   "  sbe - Single-Bit Error\n"
-	   "  mbe - Multiple-Bit Error\n"
-	   "  mse - Memory Select Error\n"
-	   "  all - all errors\n"
-	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	   "ecc inject <en|dis>    - enable/disable error injection\n"
-	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with double word access\n"
-	   "  - disables injects\n"
-	   "  - reads pattern back with double word access, generates error\n"
-	   "  - re-inits memory\n"
-	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with word access\n"
-	   "  - writes pattern with word access, generates error\n"
-	   "  - disables injects\n" "  - re-inits memory");
-#endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-}
-#endif
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
deleted file mode 100644
index 15a48dcf40..0000000000
--- a/board/mpc8360emds/pci.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/*
- * PCI Configuration space access support for MPC83xx PCI Bridge
- */
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <pci.h>
-#include <i2c.h>
-
-#include <asm/fsl_i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PCI)
-#define PCI_FUNCTION_CONFIG   0x44
-#define PCI_FUNCTION_CFG_LOCK 0x20
-
-/*
- * Initialize PCI Devices, report devices found
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc83xxemds_config_table[] = {
-	{
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 pci_cfgfunc_config_device,
-	 {PCI_ENET0_IOADDR,
-	  PCI_ENET0_MEMADDR,
-	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
-	 },
-	{}
-}
-#endif
-static struct pci_controller hose[] = {
-	{
-#ifndef CONFIG_PCI_PNP
-	      config_table:pci_mpc83xxemds_config_table,
-#endif
-	 },
-};
-
-/**********************************************************************
- * pci_init_board()
- *********************************************************************/
-void pci_init_board(void)
-#ifdef CONFIG_PCISLAVE
-{
-	u16 reg16;
-	volatile immap_t *immr;
-	volatile law83xx_t *pci_law;
-	volatile pot83xx_t *pci_pot;
-	volatile pcictrl83xx_t *pci_ctrl;
-	volatile pciconf83xx_t *pci_conf;
-
-	immr = (immap_t *) CFG_IMMR;
-	pci_law = immr->sysconf.pcilaw;
-	pci_pot = immr->ios.pot;
-	pci_ctrl = immr->pci_ctrl;
-	pci_conf = immr->pci_conf;
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-	pci_ctrl[0].pitar0 = 0x0;
-	pci_ctrl[0].pibar0 = 0x0;
-	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
-	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
-
-	pci_ctrl[0].pitar1 = 0x0;
-	pci_ctrl[0].pibar1 = 0x0;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
-
-	pci_ctrl[0].pitar2 = 0x0;
-	pci_ctrl[0].pibar2 = 0x0;
-	pci_ctrl[0].piebar2 = 0x0;
-	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
-
-	hose[0].first_busno = 0;
-	hose[0].last_busno = 0xff;
-	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
-	reg16 = 0xff;
-
-	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
-				  PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
-				   PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
-				   PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
-				   PCI_LATENCY_TIMER, 0x80);
-
-	/*
-	 * Unlock configuration lock in PCI function configuration register.
-	 */
-	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
-				  PCI_FUNCTION_CONFIG, &reg16);
-	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
-	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
-				   PCI_FUNCTION_CONFIG, reg16);
-
-	printf("Enabled PCI 32bit Agent Mode\n");
-}
-#else
-{
-	volatile immap_t *immr;
-	volatile clk83xx_t *clk;
-	volatile law83xx_t *pci_law;
-	volatile pot83xx_t *pci_pot;
-	volatile pcictrl83xx_t *pci_ctrl;
-	volatile pciconf83xx_t *pci_conf;
-
-	u8 val8, orig_i2c_bus;
-	u16 reg16;
-	u32 val32;
-	u32 dev;
-
-	immr = (immap_t *) CFG_IMMR;
-	clk = (clk83xx_t *) & immr->clk;
-	pci_law = immr->sysconf.pcilaw;
-	pci_pot = immr->ios.pot;
-	pci_ctrl = immr->pci_ctrl;
-	pci_conf = immr->pci_conf;
-	/*
-	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
-	 */
-	val32 = clk->occr;
-	udelay(2000);
-#if defined(PCI_66M)
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
-	printf("PCI clock is 66MHz\n");
-#elif defined(PCI_33M)
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
-	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
-	printf("PCI clock is 33MHz\n");
-#else
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
-	printf("PCI clock is 66MHz\n");
-#endif
-	udelay(2000);
-
-	/*
-	 * Configure PCI Local Access Windows
-	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
-
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[0].pocmr =
-	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/* PCI mmio - non-prefetch mem space */
-	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
-
-	/* PCI IO space */
-	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
-	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 =
-	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
-	    PIWAR_IWS_2G;
-
-	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
- 	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-
-	val8 = 0xf3;		/*PMC1, PMC2, PMC3 slot to PCI bus */
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-
-	/*
-	 * Release PCI RST Output signal
-	 */
-	udelay(2000);
-	pci_ctrl[0].gcr = 1;
-	udelay(2000);
-
-	hose[0].first_busno = 0;
-	hose[0].last_busno = 0xff;
-
-	/* PCI memory prefetch space */
-	pci_set_region(hose[0].regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
-
-	/* PCI memory space */
-	pci_set_region(hose[0].regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose[0].regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose[0].regions + 3,
-		       CFG_PCI_SLV_MEM_LOCAL,
-		       CFG_PCI_SLV_MEM_BUS,
-		       CFG_PCI_SLV_MEM_SIZE,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose[0].region_count = 4;
-
-	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(0, 0, 0);
-	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-	printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
-
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-}
-#endif				/* CONFIG_PCISLAVE */
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-       	u32 *p;
-       	int len;
-
-       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
-       	if (p != NULL) {
-		p[0] = hose[0].first_busno;
-		p[1] = hose[0].last_busno;
-       	}
-}
-#endif				/* CONFIG_OF_FLAT_TREE */
-#endif				/* CONFIG_PCI */
diff --git a/board/mpc8360emds/u-boot.lds b/board/mpc8360emds/u-boot.lds
deleted file mode 100644
index 937c87a27c..0000000000
--- a/board/mpc8360emds/u-boot.lds
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc83xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/mpc8540ads/Makefile b/board/mpc8540ads/Makefile
deleted file mode 100644
index 29136508f5..0000000000
--- a/board/mpc8540ads/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8540ads/config.mk b/board/mpc8540ads/config.mk
deleted file mode 100644
index 92f8931979..0000000000
--- a/board/mpc8540ads/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,Motorola Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8540ads board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 0.5MB
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8540ads/init.S b/board/mpc8540ads/init.S
deleted file mode 100644
index 242cb9fbc1..0000000000
--- a/board/mpc8540ads/init.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	16K	Non-cacheable, guarded
-	 * 0xf8000000	16K	BCSR registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR), 0,0,0,0,0,1,0,1,0,1)
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	.long TLB1_MAS0(1, 8, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1, 9, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
-			0,0,0,0,0,1,0,1,0,1)
-#endif
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     BCSR                    1M
- * 0xff00_0000     0xffff_ffff     FLASH (boot bank)       16M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-	.long 0x05
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4
-	entry_end
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
deleted file mode 100644
index 914e51a760..0000000000
--- a/board/mpc8540ads/mpc8540ads.c
+++ /dev/null
@@ -1,352 +0,0 @@
- /*
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
-
-
-int board_early_init_f (void)
-{
-    return 0;
-}
-
-int checkboard (void)
-{
-	puts("Board: ADS\n");
-
-#ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
-	       CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf("    PCI1: disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init();
-
-	return 0;
-}
-
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void
-sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-
-	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-  #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-
-static struct pci_controller hose;
-
-#endif	/* CONFIG_PCI */
-
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
-
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-}
-#endif
diff --git a/board/mpc8540ads/u-boot.lds b/board/mpc8540ads/u-boot.lds
deleted file mode 100644
index e7a88cfa44..0000000000
--- a/board/mpc8540ads/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/mpc8540ads/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/mpc8540ads/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpc8560ads/Makefile b/board/mpc8560ads/Makefile
deleted file mode 100644
index 29136508f5..0000000000
--- a/board/mpc8560ads/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8560ads/config.mk b/board/mpc8560ads/config.mk
deleted file mode 100644
index 9aef2bb163..0000000000
--- a/board/mpc8560ads/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,2003 Motorola Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8560ads board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 0.5MB
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8560ads/init.S b/board/mpc8560ads/init.S
deleted file mode 100644
index 242cb9fbc1..0000000000
--- a/board/mpc8560ads/init.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	16K	Non-cacheable, guarded
-	 * 0xf8000000	16K	BCSR registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR), 0,0,0,0,0,1,0,1,0,1)
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	.long TLB1_MAS0(1, 8, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1, 9, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
-			0,0,0,0,0,1,0,1,0,1)
-#endif
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     BCSR                    1M
- * 0xff00_0000     0xffff_ffff     FLASH (boot bank)       16M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-	.long 0x05
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4
-	entry_end
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
deleted file mode 100644
index d19bad6835..0000000000
--- a/board/mpc8560ads/mpc8560ads.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <miiphy.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
-
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-
-/*
- * MPC8560ADS Board Status & Control Registers
- */
-typedef struct bcsr_ {
-	volatile unsigned char bcsr0;
-	volatile unsigned char bcsr1;
-	volatile unsigned char bcsr2;
-	volatile unsigned char bcsr3;
-	volatile unsigned char bcsr4;
-	volatile unsigned char bcsr5;
-} bcsr_t;
-
-
-int board_early_init_f (void)
-{
-    return 0;
-}
-
-void reset_phy (void)
-{
-#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
-#endif
-	/* reset Giga bit Ethernet port if needed here */
-
-	/* reset the CPM FEC port */
-#if (CONFIG_ETHER_INDEX == 2)
-	bcsr->bcsr2 &= ~FETH2_RST;
-	udelay(2);
-	bcsr->bcsr2 |=  FETH2_RST;
-	udelay(1000);
-#elif (CONFIG_ETHER_INDEX == 3)
-	bcsr->bcsr3 &= ~FETH3_RST;
-	udelay(2);
-	bcsr->bcsr3 |=  FETH3_RST;
-	udelay(1000);
-#endif
-#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	/* reset PHY */
-	miiphy_reset("FCC1 ETHERNET", 0x0);
-
-	/* change PHY address to 0x02 */
-	bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
-
-	bb_miiphy_write(NULL, 0x02, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-#endif /* CONFIG_MII */
-}
-
-
-int checkboard (void)
-{
-	puts("Board: ADS\n");
-
-#ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
-	       CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf("    PCI1: disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init();
-
-	return 0;
-}
-
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void
-sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-
-	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller.
-	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-  #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
-
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-}
-#endif
diff --git a/board/mpc8560ads/u-boot.lds b/board/mpc8560ads/u-boot.lds
deleted file mode 100644
index 726a153f98..0000000000
--- a/board/mpc8560ads/u-boot.lds
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * (C) Copyright 2002,2003,Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/mpc8560ads/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/mpc8560ads/init.o (.text)
-    cpu/mpc85xx/commproc.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/serial_scc.o (.text)
-    cpu/mpc85xx/ether_fcc.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/spd_sdram.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile
deleted file mode 100644
index 4b68c36743..0000000000
--- a/board/mpc8641hpcn/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o pixis.o sys_eeprom.o
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-.PHONY: distclean
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude ($obj).depend
-
-#########################################################################
diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk
deleted file mode 100644
index 989a40b015..0000000000
--- a/board/mpc8641hpcn/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Jeff Brown
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8641hpcn board
-# default CCSRBAR is at 0xff700000
-# assume U-Boot is less than 0.5MB
-#
-TEXT_BASE = 0xfff01000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S
deleted file mode 100644
index 6b3e2d275d..0000000000
--- a/board/mpc8641hpcn/init.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc86xx.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
- * 0xf800_0000     0xf80f_ffff     CCSRBAR                 1M
- * 0xf810_0000     0xf81f_ffff     PIXIS                   1M
- * 0xfe00_0000     0xffff_ffff     FLASH (boot bank)       32M
- *
- * Notes:
- *    CCSRBAR don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR1 0
-#define LAWAR1  ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff)
-#define LAWAR3	(~LAWAR_EN & (LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR4 ((0xf8100000>>12) & 0xffffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
-
-#define LAWBAR5 ((CFG_PCI1_IO_BASE>>12) & 0xffffff)
-#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-#define LAWBAR6 ((CFG_PCI2_IO_BASE>>12) & 0xffffff)
-#define LAWAR6	(~LAWAR_EN &( LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)))
-
-#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff)
-#define LAWAR7	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M))
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
-#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR8 0
-#define LAWAR8  ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR9 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR9  (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	lis	r7,CFG_CCSRBAR@h
-	ori	r7,r7,CFG_CCSRBAR@l
-
-	addi    r4,r7,0
-	addi    r5,r7,0
-
-	/* Skip LAWAR0, start at LAWAR1 */
-	lis     r6,LAWBAR1@h
-	ori     r6,r6,LAWBAR1@l
-	stwu    r6, 0xc28(r4)
-
-	lis     r6,LAWAR1@h
-	ori     r6,r6,LAWAR1@l
-	stwu    r6, 0xc30(r5)
-
-	/* LAWBAR2, LAWAR2 */
-	lis     r6,LAWBAR2@h
-	ori     r6,r6,LAWBAR2@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR2@h
-	ori     r6,r6,LAWAR2@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR3, LAWAR3 */
-	lis     r6,LAWBAR3@h
-	ori     r6,r6,LAWBAR3@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR3@h
-	ori     r6,r6,LAWAR3@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR4, LAWAR4 */
-	lis     r6,LAWBAR4@h
-	ori     r6,r6,LAWBAR4@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR4@h
-	ori     r6,r6,LAWAR4@l
-	stwu    r6, 0x20(r5)
-	/* LAWBAR5, LAWAR5 */
-	lis     r6,LAWBAR5@h
-	ori     r6,r6,LAWBAR5@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR5@h
-	ori     r6,r6,LAWAR5@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR6, LAWAR6 */
-	lis     r6,LAWBAR6@h
-	ori     r6,r6,LAWBAR6@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR6@h
-	ori     r6,r6,LAWAR6@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR7, LAWAR7 */
-	lis     r6,LAWBAR7@h
-	ori     r6,r6,LAWBAR7@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR7@h
-	ori     r6,r6,LAWAR7@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR8, LAWAR8 */
-	lis     r6,LAWBAR8@h
-	ori     r6,r6,LAWBAR8@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR8@h
-	ori     r6,r6,LAWAR8@l
-	stwu    r6, 0x20(r5)
-
-	/* LAWBAR9, LAWAR9 */
-	lis     r6,LAWBAR9@h
-	ori     r6,r6,LAWBAR9@l
-	stwu    r6, 0x20(r4)
-
-	lis     r6,LAWAR9@h
-	ori     r6,r6,LAWAR9@l
-	stwu    r6, 0x20(r5)
-
-	blr
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
deleted file mode 100644
index b2cf4a9566..0000000000
--- a/board/mpc8641hpcn/mpc8641hpcn.c
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_86xx.h>
-#include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-#endif
-
-#include "pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-#include "spd_sdram.h"
-#endif
-
-void sdram_init(void);
-long int fixed_sdram(void);
-
-
-int board_early_init_f(void)
-{
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: MPC8641HPCN\n");
-
-#ifdef CONFIG_PCI
-
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_pex_t *pex1 = &immap->im_pex1;
-
-	uint devdisr = gur->devdisr;
-	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
-	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
-	uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-
-	if ((io_sel == 2 || io_sel == 3 || io_sel == 5
-	     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
-	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
-		debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
-		debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
-		if (pex1->pme_msg_det) {
-			pex1->pme_msg_det = 0xffffffff;
-			debug(" with errors.  Clearing.  Now 0x%08x",
-			      pex1->pme_msg_det);
-		}
-		debug("\n");
-	} else {
-		puts("PCI-EXPRESS 1: Disabled\n");
-	}
-
-#else
-	puts("PCI-EXPRESS1: Disabled\n");
-#endif
-
-	return 0;
-}
-
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CFG_RAMBOOT)
-	puts("    DDR: ");
-	return dram_size;
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	puts("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-long int
-fixed_sdram(void)
-{
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->ext_refrec = CFG_DDR_EXT_REFRESH;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
-	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
-
-#if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000008D;
-	ddr->err_sbe = 0x00ff0000;
-#endif
-	asm("sync;isync");
-
-	udelay(500);
-
-#if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
-#else
-	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
-#endif
-	asm("sync; isync");
-
-	udelay(500);
-#endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-      config_table:pci_mpc86xxcts_config_table,
-#endif
-};
-
-#endif /* CONFIG_PCI */
-
-void pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	extern void pci_mpc86xx_init(struct pci_controller *hose);
-
-	pci_mpc86xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-}
-#endif
-
-
-void
-mpc8641_reset_board(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	char cmd;
-	ulong val;
-	ulong corepll;
-
-	/*
-	 * No args is a simple reset request.
-	 */
-	if (argc <= 1) {
-		out8(PIXIS_BASE + PIXIS_RST, 0);
-		/* not reached */
-	}
-
-	cmd = argv[1][1];
-	switch (cmd) {
-	case 'f':		/* reset with frequency changed */
-		if (argc < 5)
-			goto my_usage;
-		read_from_px_regs(0);
-
-		val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
-
-		corepll = strfractoint(argv[3]);
-		val = val + set_px_corepll(corepll);
-		val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
-		if (val == 3) {
-			puts("Setting registers VCFGEN0 and VCTL\n");
-			read_from_px_regs(1);
-			puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
-			set_px_go();
-		} else
-			goto my_usage;
-
-		while (1) ;	/* Not reached */
-
-	case 'l':
-		if (argv[2][1] == 'f') {
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			/* reset with frequency changed */
-			val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
-
-			corepll = strfractoint(argv[4]);
-			val = val + set_px_corepll(corepll);
-			val = val + set_px_mpxpll(simple_strtoul(argv[5],
-								 NULL, 10));
-			if (val == 3) {
-				puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
-				set_altbank();
-				read_from_px_regs(1);
-				read_from_px_regs_altbank(1);
-				puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
-				set_px_go_with_watchdog();
-			} else
-				goto my_usage;
-
-			while (1) ;	/* Not reached */
-
-		} else if (argv[2][1] == 'd') {
-			/*
-			 * Reset from alternate bank without changing
-			 * frequencies but with watchdog timer enabled.
-			 */
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
-			set_altbank();
-			read_from_px_regs_altbank(1);
-			puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
-			set_px_go_with_watchdog();
-			while (1) ;	/* Not reached */
-
-		} else {
-			/*
-			 * Reset from next bank without changing
-			 * frequency and without watchdog timer enabled.
-			 */
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			if (argc > 2)
-				goto my_usage;
-			puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
-			set_altbank();
-			read_from_px_regs_altbank(1);
-			puts("Resetting board to boot from the other bank....\n");
-			set_px_go();
-		}
-
-	default:
-		goto my_usage;
-	}
-
-my_usage:
-	puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
-	puts("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
-	puts("       reset altbank [wd]\n");
-	puts("For example:   reset cf 40 2.5 10\n");
-	puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
-}
-
-
-/*
- * get_board_sys_clk
- *      Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
- */
-
-unsigned long
-get_board_sys_clk(ulong dummy)
-{
-	u8 i, go_bit, rd_clks;
-	ulong val = 0;
-
-	go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
-	go_bit &= 0x01;
-
-	rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
-	rd_clks &= 0x1C;
-
-	/*
-	 * Only if both go bit and the SCLK bit in VCFGEN0 are set
-	 * should we be using the AUX register. Remember, we also set the
-	 * GO bit to boot from the alternate bank on the on-board flash
-	 */
-
-	if (go_bit) {
-		if (rd_clks == 0x1c)
-			i = in8(PIXIS_BASE + PIXIS_AUX);
-		else
-			i = in8(PIXIS_BASE + PIXIS_SPD);
-	} else {
-		i = in8(PIXIS_BASE + PIXIS_SPD);
-	}
-
-	i &= 0x07;
-
-	switch (i) {
-	case 0:
-		val = 33000000;
-		break;
-	case 1:
-		val = 40000000;
-		break;
-	case 2:
-		val = 50000000;
-		break;
-	case 3:
-		val = 66000000;
-		break;
-	case 4:
-		val = 83000000;
-		break;
-	case 5:
-		val = 100000000;
-		break;
-	case 6:
-		val = 134000000;
-		break;
-	case 7:
-		val = 166000000;
-		break;
-	}
-
-	return val;
-}
diff --git a/board/mpc8641hpcn/pixis.c b/board/mpc8641hpcn/pixis.c
deleted file mode 100644
index 964a17ca08..0000000000
--- a/board/mpc8641hpcn/pixis.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <mpc86xx.h>
-
-#include "pixis.h"
-
-
-/*
- * Per table 27, page 58 of MPC8641HPCN spec.
- */
-int set_px_sysclk(ulong sysclk)
-{
-	u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
-
-	switch (sysclk) {
-	case 33:
-		sysclk_s = 0x04;
-		sysclk_r = 0x04;
-		sysclk_v = 0x07;
-		sysclk_aux = 0x00;
-		break;
-	case 40:
-		sysclk_s = 0x01;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x20;
-		sysclk_aux = 0x01;
-		break;
-	case 50:
-		sysclk_s = 0x01;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x2A;
-		sysclk_aux = 0x02;
-		break;
-	case 66:
-		sysclk_s = 0x01;
-		sysclk_r = 0x04;
-		sysclk_v = 0x04;
-		sysclk_aux = 0x03;
-		break;
-	case 83:
-		sysclk_s = 0x01;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x4B;
-		sysclk_aux = 0x04;
-		break;
-	case 100:
-		sysclk_s = 0x01;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x5C;
-		sysclk_aux = 0x05;
-		break;
-	case 134:
-		sysclk_s = 0x06;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x3B;
-		sysclk_aux = 0x06;
-		break;
-	case 166:
-		sysclk_s = 0x06;
-		sysclk_r = 0x1F;
-		sysclk_v = 0x4B;
-		sysclk_aux = 0x07;
-		break;
-	default:
-		printf("Unsupported SYSCLK frequency.\n");
-		return 0;
-	}
-
-	vclkh = (sysclk_s << 5) | sysclk_r;
-	vclkl = sysclk_v;
-
-	out8(PIXIS_BASE + PIXIS_VCLKH, vclkh);
-	out8(PIXIS_BASE + PIXIS_VCLKL, vclkl);
-
-	out8(PIXIS_BASE + PIXIS_AUX, sysclk_aux);
-
-	return 1;
-}
-
-
-int set_px_mpxpll(ulong mpxpll)
-{
-	u8 tmp;
-	u8 val;
-
-	switch (mpxpll) {
-	case 2:
-	case 4:
-	case 6:
-	case 8:
-	case 10:
-	case 12:
-	case 14:
-	case 16:
-		val = (u8) mpxpll;
-		break;
-	default:
-		printf("Unsupported MPXPLL ratio.\n");
-		return 0;
-	}
-
-	tmp = in8(PIXIS_BASE + PIXIS_VSPEED1);
-	tmp = (tmp & 0xF0) | (val & 0x0F);
-	out8(PIXIS_BASE + PIXIS_VSPEED1, tmp);
-
-	return 1;
-}
-
-
-int set_px_corepll(ulong corepll)
-{
-	u8 tmp;
-	u8 val;
-
-	switch ((int)corepll) {
-	case 20:
-		val = 0x08;
-		break;
-	case 25:
-		val = 0x0C;
-		break;
-	case 30:
-		val = 0x10;
-		break;
-	case 35:
-		val = 0x1C;
-		break;
-	case 40:
-		val = 0x14;
-		break;
-	case 45:
-		val = 0x0E;
-		break;
-	default:
-		printf("Unsupported COREPLL ratio.\n");
-		return 0;
-	}
-
-	tmp = in8(PIXIS_BASE + PIXIS_VSPEED0);
-	tmp = (tmp & 0xE0) | (val & 0x1F);
-	out8(PIXIS_BASE + PIXIS_VSPEED0, tmp);
-
-	return 1;
-}
-
-
-void read_from_px_regs(int set)
-{
-	u8 mask = 0x1C;
-	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0);
-
-	if (set)
-		tmp = tmp | mask;
-	else
-		tmp = tmp & ~mask;
-	out8(PIXIS_BASE + PIXIS_VCFGEN0, tmp);
-}
-
-
-void read_from_px_regs_altbank(int set)
-{
-	u8 mask = 0x04;
-	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1);
-
-	if (set)
-		tmp = tmp | mask;
-	else
-		tmp = tmp & ~mask;
-	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
-}
-
-
-void set_altbank(void)
-{
-	u8 tmp;
-
-	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp ^= 0x40;
-
-	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
-}
-
-
-void set_px_go(void)
-{
-	u8 tmp;
-
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp | 0x01;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-}
-
-
-void set_px_go_with_watchdog(void)
-{
-	u8 tmp;
-
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp | 0x09;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-}
-
-
-int disable_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	u8 tmp;
-
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-
-	/* setting VCTL[WDEN] to 0 to disable watch dog */
-	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp &= ~0x08;
-	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	   diswd, 1, 0, disable_watchdog,
-	   "diswd	- Disable watchdog timer \n",
-	   NULL);
-
-/*
- * This function takes the non-integral cpu:mpx pll ratio
- * and converts it to an integer that can be used to assign
- * FPGA register values.
- * input: strptr i.e. argv[2]
- */
-
-ulong strfractoint(uchar *strptr)
-{
-	int i, j, retval;
-	int mulconst;
-	int intarr_len = 0, decarr_len = 0, no_dec = 0;
-	ulong intval = 0, decval = 0;
-	uchar intarr[3], decarr[3];
-
-	/* Assign the integer part to intarr[]
-	 * If there is no decimal point i.e.
-	 * if the ratio is an integral value
-	 * simply create the intarr.
-	 */
-	i = 0;
-	while (strptr[i] != 46) {
-		if (strptr[i] == 0) {
-			no_dec = 1;
-			break;
-		}
-		intarr[i] = strptr[i];
-		i++;
-	}
-
-	/* Assign length of integer part to intarr_len. */
-	intarr_len = i;
-	intarr[i] = '\0';
-
-	if (no_dec) {
-		/* Currently needed only for single digit corepll ratios */
-		mulconst = 10;
-		decval = 0;
-	} else {
-		j = 0;
-		i++;		/* Skipping the decimal point */
-		while ((strptr[i] > 47) && (strptr[i] < 58)) {
-			decarr[j] = strptr[i];
-			i++;
-			j++;
-		}
-
-		decarr_len = j;
-		decarr[j] = '\0';
-
-		mulconst = 1;
-		for (i = 0; i < decarr_len; i++)
-			mulconst *= 10;
-		decval = simple_strtoul(decarr, NULL, 10);
-	}
-
-	intval = simple_strtoul(intarr, NULL, 10);
-	intval = intval * mulconst;
-
-	retval = intval + decval;
-
-	return retval;
-}
diff --git a/board/mpc8641hpcn/pixis.h b/board/mpc8641hpcn/pixis.h
deleted file mode 100644
index cd9a45db87..0000000000
--- a/board/mpc8641hpcn/pixis.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-extern int set_px_sysclk(ulong sysclk);
-extern int set_px_mpxpll(ulong mpxpll);
-extern int set_px_corepll(ulong corepll);
-extern void read_from_px_regs(int set);
-extern void read_from_px_regs_altbank(int set);
-extern void set_altbank(void);
-extern void set_px_go(void);
-extern void set_px_go_with_watchdog(void);
-extern int disable_watchdog(cmd_tbl_t *cmdtp,
-			    int flag, int argc, char *argv[]);
-extern ulong strfractoint(uchar *strptr);
diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c
deleted file mode 100644
index 74e2a3d46f..0000000000
--- a/board/mpc8641hpcn/sys_eeprom.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor
- * York Sun (yorksun@freescale.com)
- * Haiying Wang (haiying.wang@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <linux/ctype.h>
-
-#ifdef CFG_ID_EEPROM
-typedef struct {
-	unsigned char id[4];		/* 0x0000 - 0x0003 */
-	unsigned char sn[12];		/* 0x0004 - 0x000F */
-	unsigned char errata[5];	/* 0x0010 - 0x0014 */
-	unsigned char date[7];		/* 0x0015 - 0x001a */
-	unsigned char res_1[37];	/* 0x001b - 0x003f */
-	unsigned char tab_size;		/* 0x0040 */
-	unsigned char tab_flag;		/* 0x0041 */
-	unsigned char mac[8][6];	/* 0x0042 - 0x0071 */
-	unsigned char res_2[126];	/* 0x0072 - 0x00ef */
-	unsigned int crc;		/* 0x00f0 - 0x00f3 crc32 checksum */
-} EEPROM_data;
-
-static EEPROM_data mac_data;
-
-int mac_show(void)
-{
-	int i;
-	unsigned char ethaddr[8][18];
-
-	printf("ID %c%c%c%c\n",
-	       mac_data.id[0],
-	       mac_data.id[1],
-	       mac_data.id[2],
-	       mac_data.id[3]);
-	printf("Errata %c%c%c%c%c\n",
-	       mac_data.errata[0],
-	       mac_data.errata[1],
-	       mac_data.errata[2],
-	       mac_data.errata[3],
-	       mac_data.errata[4]);
-	printf("Date %c%c%c%c%c%c%c\n",
-	       mac_data.date[0],
-	       mac_data.date[1],
-	       mac_data.date[2],
-	       mac_data.date[3],
-	       mac_data.date[4],
-	       mac_data.date[5],
-	       mac_data.date[6]);
-	for (i = 0; i < 8; i++) {
-		sprintf(ethaddr[i],
-			"%02x:%02x:%02x:%02x:%02x:%02x",
-			mac_data.mac[i][0],
-			mac_data.mac[i][1],
-			mac_data.mac[i][2],
-			mac_data.mac[i][3],
-			mac_data.mac[i][4],
-			mac_data.mac[i][5]);
-		printf("MAC %d %s\n", i, ethaddr[i]);
-	}
-
-	setenv("ethaddr", ethaddr[0]);
-	setenv("eth1addr", ethaddr[1]);
-	setenv("eth2addr", ethaddr[2]);
-	setenv("eth3addr", ethaddr[3]);
-
-	return 0;
-}
-
-int mac_read(void)
-{
-	int ret, length;
-	unsigned int crc = 0;
-	unsigned char dev = ID_EEPROM_ADDR, *data;
-
-	length = sizeof(EEPROM_data);
-	ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length);
-	if (ret) {
-		printf("Read failed.\n");
-		return -1;
-	}
-
-	data = (unsigned char *)(&mac_data);
-	printf("Check CRC on reading ...");
-	crc = crc32(crc, data, length - 4);
-	if (crc != mac_data.crc) {
-		printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n",
-		     mac_data.crc, crc);
-		return -1;
-	} else {
-		printf("CRC OK\n");
-		mac_show();
-	}
-	return 0;
-}
-
-int mac_prog(void)
-{
-	int ret, i, length;
-	unsigned int crc = 0;
-	unsigned char dev = ID_EEPROM_ADDR, *ptr;
-	unsigned char *eeprom_data = (unsigned char *)(&mac_data);
-
-	for (i = 0; i < sizeof(mac_data.res_1); i++)
-		mac_data.res_1[i] = 0;
-	for (i = 0; i < sizeof(mac_data.res_2); i++)
-		mac_data.res_2[i] = 0;
-	length = sizeof(EEPROM_data);
-	crc = crc32(crc, eeprom_data, length - 4);
-	mac_data.crc = crc;
-	for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) {
-		ret =
-		    i2c_write(dev, i, 1, ptr,
-			      (length - i) < 8 ? (length - i) : 8);
-		udelay(5000);	/* 5ms write cycle timing */
-		if (ret)
-			break;
-	}
-	if (ret) {
-		printf("Programming failed.\n");
-		return -1;
-	} else {
-		printf("Programming %d bytes. Reading back ...\n", length);
-		mac_read();
-	}
-	return 0;
-}
-
-int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	int i;
-	char cmd = 's';
-	unsigned long long mac_val;
-
-	if (i2c_probe(ID_EEPROM_ADDR) != 0)
-		return -1;
-
-	if (argc > 1) {
-		cmd = argv[1][0];
-		switch (cmd) {
-		case 'r':	/* display */
-			mac_read();
-			break;
-		case 's':	/* save */
-			mac_prog();
-			break;
-		case 'i':	/* id */
-			for (i = 0; i < 4; i++) {
-				mac_data.id[i] = argv[2][i];
-			}
-			break;
-		case 'n':	/* serial number */
-			for (i = 0; i < 12; i++) {
-				mac_data.sn[i] = argv[2][i];
-			}
-			break;
-		case 'e':	/* errata */
-			for (i = 0; i < 5; i++) {
-				mac_data.errata[i] = argv[2][i];
-			}
-			break;
-		case 'd':	/* date */
-			for (i = 0; i < 7; i++) {
-				mac_data.date[i] = argv[2][i];
-			}
-			break;
-		case 'p':	/* number of ports */
-			mac_data.tab_size =
-			    (unsigned char)simple_strtoul(argv[2], NULL, 16);
-			break;
-		case '0':	/* mac 0 */
-		case '1':	/* mac 1 */
-		case '2':	/* mac 2 */
-		case '3':	/* mac 3 */
-		case '4':	/* mac 4 */
-		case '5':	/* mac 5 */
-		case '6':	/* mac 6 */
-		case '7':	/* mac 7 */
-			mac_val = simple_strtoull(argv[2], NULL, 16);
-			for (i = 0; i < 6; i++) {
-				mac_data.mac[cmd - '0'][i] =
-				    *((unsigned char *)
-				      (((unsigned int)(&mac_val)) + i + 2));
-			}
-			break;
-		case 'h':	/* help */
-		default:
-			printf("Usage:\n%s\n", cmdtp->usage);
-			break;
-		}
-	} else {
-		mac_show();
-	}
-	return 0;
-}
-
-int mac_read_from_eeprom(void)
-{
-	int length, i;
-	unsigned char dev = ID_EEPROM_ADDR;
-	unsigned char *data;
-	unsigned char ethaddr[4][18];
-	unsigned char enetvar[32];
-	unsigned int crc = 0;
-
-	length = sizeof(EEPROM_data);
-	if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) {
-		printf("Read failed.\n");
-		return -1;
-	}
-
-	data = (unsigned char *)(&mac_data);
-	crc = crc32(crc, data, length - 4);
-	if (crc != mac_data.crc) {
-		return -1;
-	} else {
-		for (i = 0; i < 4; i++) {
-			if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
-				sprintf(ethaddr[i],
-					"%02x:%02x:%02x:%02x:%02x:%02x",
-					mac_data.mac[i][0],
-					mac_data.mac[i][1],
-					mac_data.mac[i][2],
-					mac_data.mac[i][3],
-					mac_data.mac[i][4],
-					mac_data.mac[i][5]);
-				sprintf(enetvar,
-					i ? "eth%daddr" : "ethaddr",
-					i);
-				setenv(enetvar, ethaddr[i]);
-			}
-		}
-	}
-	return 0;
-}
-#endif /* CFG_ID_EEPROM */
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
deleted file mode 100644
index b34de8e0ac..0000000000
--- a/board/mpc8641hpcn/u-boot.lds
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc.
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Jeff Brown
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFF00100 :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFF70000 :
-  {
-    cpu/mpc86xx/start.o	(.bootpg)
-    board/mpc8641hpcn/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + 1024;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc86xx/start.o	(.text)
-    board/mpc8641hpcn/init.o (.text)
-    cpu/mpc86xx/traps.o (.text)
-    cpu/mpc86xx/interrupts.o (.text)
-    cpu/mpc86xx/cpu_init.o (.text)
-    cpu/mpc86xx/cpu.o (.text)
-    cpu/mpc86xx/speed.o (.text)
-    cpu/mpc86xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile
deleted file mode 100644
index f8f4329f73..0000000000
--- a/board/mpl/mip405/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
-			../common/usb_uhci.o ../common/memtst.o ../common/common_util.o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
deleted file mode 100644
index 6fbc5859c0..0000000000
--- a/board/mpl/mip405/cmd_mip405.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * hacked for MIP405
- */
-
-#include <common.h>
-#include <command.h>
-#include "mip405.h"
-#include "../common/common_util.h"
-
-
-extern void print_mip405_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-
- 	ulong led_on;
-
-	if (strcmp(argv[1], "info") == 0)
-	{
-		print_mip405_info();
-	 	return 0;
-   	}
- 	if (strcmp(argv[1], "led") == 0)
-	{
-		led_on = (ulong)simple_strtoul(argv[2], NULL, 10);
-		user_led0(led_on);
-		return 0;
-   	}
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-U_BOOT_CMD(
-	mip405,	8,	1,	do_mip405,
-	"mip405  - MIP405 specific Cmds\n",
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
-	"mip405 flash mps - updates U-Boot with image from MPS\n"
-	"mip405 info      - displays board information\n"
-	"mip405 led <on>  - switches LED on (on=1) or off (on=0)\n"
-	"mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n"
-);
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/mip405/config.mk b/board/mpl/mip405/config.mk
deleted file mode 100644
index 0f8d153d8e..0000000000
--- a/board/mpl/mip405/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S
deleted file mode 100644
index 3351b5b840..0000000000
--- a/board/mpl/mip405/init.S
+++ /dev/null
@@ -1,233 +0,0 @@
-/*------------------------------------------------------------------------------+
- *
- *      This source code has been made available to you by IBM on an AS-IS
- *      basis.  Anyone receiving this source is licensed under IBM
- *      copyrights to use it in any way he or she deems fit, including
- *      copying it, modifying it, compiling it, and redistributing it either
- *      with or without modifications.  No license under IBM patents or
- *      patent applications is to be implied by the copyright license.
- *
- *      Any user of this software should understand that IBM cannot provide
- *      technical support for this software and will not be responsible for
- *      any consequences resulting from the use of this software.
- *
- *      Any person who transfers this source code or any derivative work
- *      must include the IBM copyright notice, this paragraph, and the
- *      preceding two paragraphs in the transferred software.
- *
- *      COPYRIGHT   I B M   CORPORATION 1995
- *      LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------------
- * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external
- *		peripherals. IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *	Bank 0 - Flash or Multi Purpose Socket
- *	Bank 1 - Multi Purpose Socket or Flash (set in C-Code)
- *	Bank 2 - UART 1 (set in C-Code)
- *	Bank 3 - UART 2 (set in C-Code)
- *	Bank 4 - not used
- *	Bank 5 - not used
- *	Bank 6 - not used
- *	Bank 7 - PLD Register
- *-----------------------------------------------------------------------------*/
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <configs/MIP405.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include "mip405.h"
-
-
-  .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
-  mflr   r4                      /* save link register */
-  mfdcr  r3,strap                /* get strapping reg */
-  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
-  bnelr                          /* jump back if PCI boot */
-
-  bl      ..getAddr
-..getAddr:
-  mflr    r3                      /* get address of ..getAddr */
-  mtlr    r4                      /* restore link register */
-  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
-  mtctr   r4                      /* 14 cache lines to fit this function */
-				   /* in cache (gives us 8x14=112 instrctns) */
-..ebcloop:
-  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-  addi    r3,r3,32								/* move to next cache line */
-  bdnz    ..ebcloop               /* continue for 14 cache lines */
-
-   /*-------------------------------------------------------------------
-    * Delay to ensure all accesses to ROM are complete before changing
-    * bank 0 timings.
-    *------------------------------------------------------------------- */
-	addis	r3,0,0x0
-  ori     r3,r3,0xA000
-  mtctr   r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-
-	/*-----------------------------------------------------------------------
-	 * decide boot up mode
-	 *----------------------------------------------------------------------- */
-	addi		r4,0,pb0cr
-	mtdcr		ebccfga,r4
-	mfdcr		r4,ebccfgd
-
-	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq		0f				/* jump if 8 bit bus width */
-
-	/* setup 16 bit things
-   *-----------------------------------------------------------------------
-   * Memory Bank 0 (16 Bit Flash) initialization
-   *---------------------------------------------------------------------- */
-
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,(FLASH_AP_B)@h
-	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(FLASH_CR_B)@h
-	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   ebccfgd,r4
-	b				1f
-
-0:
-
-	/* 8Bit boot mode: */
-	/*-----------------------------------------------------------------------
-	* Memory Bank 0 Multi Purpose Socket initialization
-	*----------------------------------------------------------------------- */
-	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,(MPS_AP_B)@h
-	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(MPS_CR_B)@h
-	ori     r4,r4,(MPS_CR_B)@l
-
-	mtdcr   ebccfgd,r4
-
-
-1:
-  /*-----------------------------------------------------------------------
-   * Memory Bank 2-3-4-5-6 (not used) initialization
-   *-----------------------------------------------------------------------*/
-  addi    r4,0,pb1cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb2cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb3cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb4cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb5cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb6cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb7cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-  nop				/* pass2 DCR errata #8 */
-  blr
-
-/*-----------------------------------------------------------------------------
- * Function:     sdram_init
- * Description:  Configures the internal SRAM memory. and setup the
- *               Stackpointer in it.
- *----------------------------------------------------------------------------- */
-	.globl  sdram_init
-
-sdram_init:
-
-
-  blr
-
-
-#if defined(CONFIG_BOOT_PCI)
-    .section .bootpg,"ax"
-    .globl _start_pci
-/*******************************************
- */
-
-_start_pci:
-  /* first handle errata #68 / PCI_18 */
-  iccci   r0, r0          /* invalidate I-cache */
-  lis     r31, 0
-  mticcr  r31             /* ICCR = 0 (all uncachable) */
-  isync
-
-  mfccr0  r28             /* set CCR0[24] = 1 */
-  ori     r28, r28, 0x0080
-  mtccr0  r28
-
-  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
-  lis     r28, 0xEF40
-  addi    r28, r28, 0x0004
-  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
-  lis     r29, 0xFFF8     /* open 512 kByte */
-  addi    r29, r29, 0x0001/* and enable this region */
-  stwbrx  r29, r0, r28    /* write PMM0MA */
-
-  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
-  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
-
-  lis     r31, 0x8000     /* set en bit bus 0 */
-  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
-  stwbrx  r31, r0, r28    /* write it */
-
-  lwbrx   r31, r0, r29    /* load XBCS register */
-  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
-  stwbrx  r31, r0, r29    /* write back XBCS register */
-
-  nop
-  nop
-  b	_start		/* normal start */
-#endif
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
deleted file mode 100644
index 34f328999d..0000000000
--- a/board/mpl/mip405/mip405.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * TODO: clean-up
- */
-
-/*
- * How do I program the SDRAM Timing Register (SDRAM0_TR) for a specific SDRAM or DIMM?
- *
- * As an example, consider a case where PC133 memory with CAS Latency equal to 2 is being
- * used with a 200MHz 405GP. For a typical 128Mb, PC133 SDRAM, the relevant minimum
- * parameters from the datasheet are:
- * Tclk = 7.5ns (CL = 2)
- * Trp = 15ns
- * Trc = 60ns
- * Trcd = 15ns
- * Trfc = 66ns
- *
- * If we are operating the 405GP with the MemClk output frequency set to 100 MHZ, the clock
- * period is 10ns and the parameters needed for the Timing Register are:
- * CASL = CL = 2 clock cycles
- * PTA = Trp = 15ns / 10ns = 2 clock cycles
- * CTP = Trc - Trcd - Trp = (60ns - 15ns - 15ns) / 10ns= 3 clock cycles
- * LDF = 2 clock cycles (but can be extended to meet board-level timing)
- * RFTA = Trfc = 66ns / 10ns= 7 clock cycles
- * RCD = Trcd = 15ns / 10ns= 2 clock cycles
- *
- * The actual bit settings in the register would be:
- *
- * CASL = 0b01
- * PTA = 0b01
- * CTP = 0b10
- * LDF = 0b01
- * RFTA = 0b011
- * RCD = 0b01
- *
- * If Trfc is not specified in the datasheet for PC100 or PC133 memory, set RFTA = Trc
- * instead. Figure 24 in the PC SDRAM Specification Rev. 1.7 shows refresh to active delay
- * defined as Trc rather than Trfc.
- * When using DIMM modules, most but not all of the required timing parameters can be read
- * from the Serial Presence Detect (SPD) EEPROM on the module. Specifically, Trc and Trfc
- * are not available from the EEPROM
- */
-
-#include <common.h>
-#include "mip405.h"
-#include <asm/processor.h>
-#include <405gp_i2c.h>
-#include <miiphy.h>
-#include "../common/common_util.h"
-#include <i2c.h>
-#include <rtc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern block_dev_desc_t * scsi_get_dev(int dev);
-extern block_dev_desc_t * ide_get_dev(int dev);
-
-#undef SDRAM_DEBUG
-#define ENABLE_ECC /* for ecc boards */
-#define FALSE           0
-#define TRUE            1
-
-/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
-#ifndef __ldiv_t_defined
-typedef struct {
-	long int quot;		/* Quotient	*/
-	long int rem;		/* Remainder	*/
-} ldiv_t;
-extern ldiv_t ldiv (long int __numer, long int __denom);
-# define __ldiv_t_defined	1
-#endif
-
-
-#define PLD_PART_REG 		PER_PLD_ADDR + 0
-#define PLD_VERS_REG 		PER_PLD_ADDR + 1
-#define PLD_BOARD_CFG_REG 	PER_PLD_ADDR + 2
-#define PLD_IRQ_REG 		PER_PLD_ADDR + 3
-#define PLD_COM_MODE_REG 	PER_PLD_ADDR + 4
-#define PLD_EXT_CONF_REG 	PER_PLD_ADDR + 5
-
-#define MEGA_BYTE (1024*1024)
-
-typedef struct {
-	unsigned char boardtype; /* Board revision and Population Options */
-	unsigned char cal;		/* cas Latency (will be programmend as cal-1) */
-	unsigned char trp;		/* datain27 in clocks */
-	unsigned char trcd;		/* datain29 in clocks */
-	unsigned char tras;		/* datain30 in clocks */
-	unsigned char tctp;		/* tras - trcd in clocks */
-	unsigned char am;		/* Address Mod (will be programmed as am-1) */
-	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
-	unsigned char ecc;		/* if true, ecc is enabled */
-} sdram_t;
-#if defined(CONFIG_MIP405T)
-const sdram_t sdram_table[] = {
-	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		2,	/* Address Mode = 2 (12x9x4) */
-		3,	/* size value (32MByte) */
-		0},	/* ECC disabled */
-	{ 0xff, /* terminator */
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff }
-};
-#else
-const sdram_t sdram_table[] = {
-	{ 0x0f,	/* Rev A, 128MByte -1 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x07,	/* Rev A, 64MByte -2 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		2,	/* Address Mode = 2 */
-		4,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x03,	/* Rev A, 128MByte -4 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x1f,	/* Rev B, 128MByte -3 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x2f,	/* Rev C, 128MByte -3 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0xff, /* terminator */
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff }
-};
-#endif /*CONFIG_MIP405T */
-void SDRAM_err (const char *s)
-{
-#ifndef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-#endif
-	serial_puts ("\n");
-	serial_puts (s);
-	serial_puts ("\n enable SDRAM_DEBUG for more info\n");
-	for (;;);
-}
-
-
-unsigned char get_board_revcfg (void)
-{
-	out8 (PER_BOARD_ADDR, 0);
-	return (in8 (PER_BOARD_ADDR));
-}
-
-
-#ifdef SDRAM_DEBUG
-
-void write_hex (unsigned char i)
-{
-	char cc;
-
-	cc = i >> 4;
-	cc &= 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-	cc = i & 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-}
-
-void write_4hex (unsigned long val)
-{
-	write_hex ((unsigned char) (val >> 24));
-	write_hex ((unsigned char) (val >> 16));
-	write_hex ((unsigned char) (val >> 8));
-	write_hex ((unsigned char) val);
-}
-
-#endif
-
-
-int init_sdram (void)
-{
-	unsigned long	tmp, baseaddr;
-	unsigned short	i;
-	unsigned char	trp_clocks,
-			trcd_clocks,
-			tras_clocks,
-			trc_clocks,
-			tctp_clocks;
-	unsigned char	cal_val;
-	unsigned char	bc;
-	unsigned long	sdram_tim, sdram_bank;
-
-	/*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-	/* set up the pld */
-	mtdcr (ebccfga, pb7ap);
-	mtdcr (ebccfgd, PLD_AP);
-	mtdcr (ebccfga, pb7cr);
-	mtdcr (ebccfgd, PLD_CR);
-	/* THIS IS OBSOLETE */
-	/* set up the board rev reg*/
-	mtdcr (ebccfga, pb5ap);
-	mtdcr (ebccfgd, BOARD_AP);
-	mtdcr (ebccfga, pb5cr);
-	mtdcr (ebccfgd, BOARD_CR);
-#ifdef SDRAM_DEBUG
-	/* get all informations from PLD */
-	serial_puts ("\nPLD Part  0x");
-	bc = in8 (PLD_PART_REG);
-	write_hex (bc);
-	serial_puts ("\nPLD Vers  0x");
-	bc = in8 (PLD_VERS_REG);
-	write_hex (bc);
-	serial_puts ("\nBoard Rev 0x");
-	bc = in8 (PLD_BOARD_CFG_REG);
-	write_hex (bc);
-	serial_puts ("\n");
-#endif
-	/* check board */
-	bc = in8 (PLD_PART_REG);
-#if defined(CONFIG_MIP405T)
-	if((bc & 0x80)==0)
-		SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
-#else
-	if((bc & 0x80)==0x80)
-		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
-#endif
-	/* set-up the chipselect machine */
-	mtdcr (ebccfga, pb0cr);		/* get cs0 config reg */
-	tmp = mfdcr (ebccfgd);
-	if ((tmp & 0x00002000) == 0) {
-		/* MPS Boot, set up the flash */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, FLASH_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, FLASH_CR);
-	} else {
-		/* Flash boot, set up the MPS */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, MPS_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, MPS_CR);
-	}
-	/* set up UART0 (CS2) and UART1 (CS3) */
-	mtdcr (ebccfga, pb2ap);
-	mtdcr (ebccfgd, UART0_AP);
-	mtdcr (ebccfga, pb2cr);
-	mtdcr (ebccfgd, UART0_CR);
-	mtdcr (ebccfga, pb3ap);
-	mtdcr (ebccfgd, UART1_AP);
-	mtdcr (ebccfga, pb3cr);
-	mtdcr (ebccfgd, UART1_CR);
-	bc = in8 (PLD_BOARD_CFG_REG);
-#ifdef SDRAM_DEBUG
-	serial_puts ("\nstart SDRAM Setup\n");
-	serial_puts ("\nBoard Rev: ");
-	write_hex (bc);
-	serial_puts ("\n");
-#endif
-	i = 0;
-	baseaddr = CFG_SDRAM_BASE;
-	while (sdram_table[i].sz != 0xff) {
-		if (sdram_table[i].boardtype == bc)
-			break;
-		i++;
-	}
-	if (sdram_table[i].boardtype != bc)
-		SDRAM_err ("No SDRAM table found for this board!!!\n");
-#ifdef SDRAM_DEBUG
-	serial_puts (" found table ");
-	write_hex (i);
-	serial_puts (" \n");
-#endif
-	/* since the ECC initialisation needs some time,
-	 * we show that we're alive
-	 */
-	if (sdram_table[i].ecc)
-		serial_puts ("\nInitializing SDRAM, Please stand by");
-	cal_val = sdram_table[i].cal - 1;	/* Cas Latency */
-	trp_clocks = sdram_table[i].trp;	/* 20ns / 7.5 ns datain[27] */
-	trcd_clocks = sdram_table[i].trcd;	/* 20ns /7.5 ns (datain[29]) */
-	tras_clocks = sdram_table[i].tras;	/* 44ns /7.5 ns  (datain[30]) */
-	/* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
-	tctp_clocks = sdram_table[i].tctp;	/* 44 - 20ns = 24ns */
-	/* trc_clocks is sum of trp_clocks + tras_clocks */
-	trc_clocks = trp_clocks + tras_clocks;
-	/* get SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	sdram_tim = mfdcr (memcfgd) & ~0x018FC01F;
-	/* insert CASL value */
-	sdram_tim |= ((unsigned long) (cal_val)) << 23;
-	/* insert PTA value */
-	sdram_tim |= ((unsigned long) (trp_clocks - 1)) << 18;
-	/* insert CTP value */
-	sdram_tim |=
-			((unsigned long) (trc_clocks - trp_clocks -
-							  trcd_clocks)) << 16;
-	/* insert LDF (always 01) */
-	sdram_tim |= ((unsigned long) 0x01) << 14;
-	/* insert RFTA value */
-	sdram_tim |= ((unsigned long) (trc_clocks - 4)) << 2;
-	/* insert RCD value */
-	sdram_tim |= ((unsigned long) (trcd_clocks - 1)) << 0;
-
-	tmp = ((unsigned long) (sdram_table[i].am - 1) << 13);	/* AM = 3 */
-	/* insert SZ value; */
-	tmp |= ((unsigned long) sdram_table[i].sz << 17);
-	/* get SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	sdram_bank = mfdcr (memcfgd) & ~0xFFCEE001;
-	sdram_bank |= (baseaddr | tmp | 0x01);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("sdtr: ");
-	write_4hex (sdram_tim);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, sdram_tim);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("mb0cf: ");
-	write_4hex (sdram_bank);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, sdram_bank);
-
-	if (get_bus_freq (tmp) > 110000000) {	/* > 110MHz */
-		/* get SDRAM refresh interval register */
-		mtdcr (memcfga, mem_rtr);
-		tmp = mfdcr (memcfgd) & ~0x3FF80000;
-		tmp |= 0x07F00000;
-	} else {
-		/* get SDRAM refresh interval register */
-		mtdcr (memcfga, mem_rtr);
-		tmp = mfdcr (memcfgd) & ~0x3FF80000;
-		tmp |= 0x05F00000;
-	}
-	/* write SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, tmp);
-	/* enable ECC if used */
-#if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI)
-	if (sdram_table[i].ecc) {
-		/* disable checking for all banks */
-		unsigned long	*p;
-#ifdef SDRAM_DEBUG
-		serial_puts ("disable ECC.. ");
-#endif
-		mtdcr (memcfga, mem_ecccf);
-		tmp = mfdcr (memcfgd);
-		tmp &= 0xff0fffff;		/* disable all banks */
-		mtdcr (memcfga, mem_ecccf);
-		/* set up SDRAM Controller with ECC enabled */
-#ifdef SDRAM_DEBUG
-		serial_puts ("setup SDRAM Controller.. ");
-#endif
-		mtdcr (memcfgd, tmp);
-		mtdcr (memcfga, mem_mcopt1);
-		tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000;
-		mtdcr (memcfga, mem_mcopt1);
-		mtdcr (memcfgd, tmp);
-		udelay (600);
-#ifdef SDRAM_DEBUG
-		serial_puts ("fill the memory..\n");
-#endif
-		serial_puts (".");
-		/* now, fill all the memory */
-		tmp = ((4 * MEGA_BYTE) << sdram_table[i].sz);
-		p = (unsigned long) 0;
-		while ((unsigned long) p < tmp) {
-			*p++ = 0L;
-			if (!((unsigned long) p % 0x00800000))	/* every 8MByte */
-				serial_puts (".");
-		}
-		/* enable bank 0 */
-		serial_puts (".");
-#ifdef SDRAM_DEBUG
-		serial_puts ("enable ECC\n");
-#endif
-		udelay (400);
-		mtdcr (memcfga, mem_ecccf);
-		tmp = mfdcr (memcfgd);
-		tmp |= 0x00800000;		/* enable bank 0 */
-		mtdcr (memcfgd, tmp);
-		udelay (400);
-	} else
-#endif
-	{
-		/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-		mtdcr (memcfga, mem_mcopt1);
-		tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80C00000;
-		mtdcr (memcfga, mem_mcopt1);
-		mtdcr (memcfgd, tmp);
-		udelay (400);
-	}
-	serial_puts ("\n");
-	return (0);
-}
-
-int board_early_init_f (void)
-{
-	init_sdram ();
-
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the PIP405 board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) SouthBridge; active low; level sensitive
-   |       IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
-   |       IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for MIP405 board:
-   |       An interrupt taken for the SouthBridge (IRQ 25) indicates that
-   |       the Interrupt Controller in the South Bridge has caused the
-   |       interrupt. The IC must be read to determine which device
-   |       caused the interrupt.
-   |
-   +-------------------------------------------------------------------------*/
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (uicer, 0x00000000);	/* disable all ints */
-	mtdcr (uiccr, 0x00000000);	/* set all to be non-critical (for now) */
-	mtdcr (uicpr, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-	return 0;
-}
-
-
-/*
- * Get some PLD Registers
- */
-
-unsigned short get_pld_parvers (void)
-{
-	unsigned short result;
-	unsigned char rc;
-
-	rc = in8 (PLD_PART_REG);
-	result = (unsigned short) rc << 8;
-	rc = in8 (PLD_VERS_REG);
-	result |= rc;
-	return result;
-}
-
-
-void user_led0 (unsigned char on)
-{
-	if (on)
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) | 0x4));
-	else
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) & 0xfb));
-}
-
-
-void ide_set_reset (int idereset)
-{
-	/* if reset = 1 IDE reset will be asserted */
-	if (idereset)
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) | 0x1));
-	else {
-		udelay (10000);
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) & 0xfe));
-	}
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
-{
-#if !defined(CONFIG_MIP405T)
-	unsigned char bc,rc,tmp;
-	int i;
-
-	bc = in8 (PLD_BOARD_CFG_REG);
-	tmp = ~bc;
-	tmp &= 0xf;
-	rc = 0;
-	for (i = 0; i < 4; i++) {
-		rc <<= 1;
-		rc += (tmp & 0x1);
-		tmp >>= 1;
-	}
-	rc++;
-	if((  (((bc>>4) & 0xf)==0x2) /* Rev C PCB or */
-	   || (((bc>>4) & 0xf)==0x1)) /* Rev B PCB with */
-		&& (rc==0x1))     /* Population Option 1 is a -3 */
-		rc=3;
-	*pcbrev=(bc >> 4) & 0xf;
-	*var=rc;
-#else
-	unsigned char bc;
-	bc = in8 (PLD_BOARD_CFG_REG);
-	*pcbrev=(bc >> 4) & 0xf;
-	*var=16-(bc & 0xf);
-#endif
-}
-
-/*
- * Check Board Identity:
- */
-/* serial String: "MIP405_1000" OR "MIP405T_1000" */
-#if !defined(CONFIG_MIP405T)
-#define BOARD_NAME	"MIP405"
-#else
-#define BOARD_NAME	"MIP405T"
-#endif
-
-int checkboard (void)
-{
-	char s[50];
-	unsigned char bc, var;
-	int i;
-	backup_t *b = (backup_t *) s;
-
-	puts ("Board: ");
-	get_pcbrev_var(&bc,&var);
-	i = getenv_r ("serial#", (char *)s, 32);
-	if ((i == 0) || strncmp ((char *)s, BOARD_NAME,sizeof(BOARD_NAME))) {
-		get_backup_values (b);
-		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming " BOARD_NAME);
-			printf ("-%d Rev %c", var, 'A' + bc);
-		} else {
-			b->serial_name[sizeof(BOARD_NAME)-1] = 0;
-			printf ("%s-%d Rev %c SN: %s", b->serial_name, var,
-					'A' + bc, &b->serial_name[sizeof(BOARD_NAME)]);
-		}
-	} else {
-		s[sizeof(BOARD_NAME)-1] = 0;
-		printf ("%s-%d Rev %c SN: %s", s, var,'A' + bc,
-				&s[sizeof(BOARD_NAME)]);
-	}
-	bc = in8 (PLD_EXT_CONF_REG);
-	printf (" Boot Config: 0x%x\n", bc);
-	return (0);
-}
-
-
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/*
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-*/
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-static int test_dram (unsigned long ramsize);
-
-long int initdram (int board_type)
-{
-
-	unsigned long bank_reg[4], tmp, bank_size;
-	int i, ds;
-	unsigned long TotalSize;
-
-	ds = 0;
-	/* since the DRAM controller is allready set up, calculate the size with the
-	   bank registers    */
-	mtdcr (memcfga, mem_mb0cf);
-	bank_reg[0] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb1cf);
-	bank_reg[1] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb2cf);
-	bank_reg[2] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb3cf);
-	bank_reg[3] = mfdcr (memcfgd);
-	TotalSize = 0;
-	for (i = 0; i < 4; i++) {
-		if ((bank_reg[i] & 0x1) == 0x1) {
-			tmp = (bank_reg[i] >> 17) & 0x7;
-			bank_size = 4 << tmp;
-			TotalSize += bank_size;
-		} else
-			ds = 1;
-	}
-	mtdcr (memcfga, mem_ecccf);
-	tmp = mfdcr (memcfgd);
-
-	if (!tmp)
-		printf ("No ");
-	printf ("ECC ");
-
-	test_dram (TotalSize * MEGA_BYTE);
-	return (TotalSize * MEGA_BYTE);
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-static int test_dram (unsigned long ramsize)
-{
-#ifdef SDRAM_DEBUG
-	mem_test (0L, ramsize, 1);
-#endif
-	/* not yet implemented */
-	return (1);
-}
-
-/* used to check if the time in RTC is valid */
-static unsigned long start;
-static struct rtc_time tm;
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-int misc_init_r (void)
-{
-	/* adjust flash start and size as well as the offset */
-	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
-	gd->bd->bi_flashoffset=0;
-
-	/* check, if RTC is running */
-	rtc_get (&tm);
-	start=get_timer(0);
-	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(strap) & PSR_ROM_LOC)
-	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
-
-	return (0);
-}
-
-
-void print_mip405_rev (void)
-{
-	unsigned char part, vers, pcbrev, var;
-
-	get_pcbrev_var(&pcbrev,&var);
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	printf ("Rev:   " BOARD_NAME "-%d Rev %c PLD %d Vers %d\n",
-			var, pcbrev + 'A', part & 0x7F, vers);
-}
-
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-	return 0;	/* No hotkeys supported */
-}
-#endif
-
-extern void mem_test_reloc(void);
-extern int mk_date (char *, struct rtc_time *);
-
-int last_stage_init (void)
-{
-	unsigned long stop;
-	struct rtc_time newtm;
-	char *s;
-	mem_test_reloc();
-	/* write correct LED configuration */
-	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x14, 0x2402) != 0) {
-		printf ("Error writing to the PHY\n");
-	}
-	/* since LED/CFG2 is not connected on the -2,
-	 * write to correct capability information */
-	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x4, 0x01E1) != 0) {
-		printf ("Error writing to the PHY\n");
-	}
-	print_mip405_rev ();
-	show_stdio_dev ();
-	check_env ();
-	/* check if RTC time is valid */
-	stop=get_timer(start);
-	while(stop<1200) {   /* we wait 1.2 sec to check if the RTC is running */
-		udelay(1000);
-		stop=get_timer(start);
-	}
-	rtc_get (&newtm);
-	if(tm.tm_sec==newtm.tm_sec) {
-		s=getenv("defaultdate");
-		if(!s)
-			mk_date ("010112001970", &newtm);
-		else
-			if(mk_date (s, &newtm)!=0) {
-				printf("RTC: Bad date format in defaultdate\n");
-				return 0;
-			}
-		rtc_reset ();
-		rtc_set(&newtm);
-	}
-	return 0;
-}
-
-/***************************************************************************
- * some helping routines
- */
-
-int overwrite_console (void)
-{
-	return ((in8 (PLD_EXT_CONF_REG) & 0x1)==0);	/* return TRUE if console should be overwritten */
-}
-
-
-/************************************************************************
-* Print MIP405 Info
-************************************************************************/
-void print_mip405_info (void)
-{
-	unsigned char part, vers, cfg, irq_reg, com_mode, ext;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	irq_reg = in8 (PLD_IRQ_REG);
-	com_mode = in8 (PLD_COM_MODE_REG);
-	ext = in8 (PLD_EXT_CONF_REG);
-
-	printf ("PLD Part %d version %d\n", part & 0x7F, vers);
-	printf ("Board Revision %c\n", ((cfg >> 4) & 0xf) + 'A');
-	printf ("Population Options %d %d %d %d\n", (cfg) & 0x1,
-			(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
-	printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
-	printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-#if !defined(CONFIG_MIP405T)
-	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
-			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
-			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1, (ext >> 7) & 0x1);
-	printf ("SER1 uses handshakes %s\n",
-			(ext & 0x80) ? "DTR/DSR" : "RTS/CTS");
-#else
-	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
-			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
-			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1,(ext >> 7) & 0x1);
-#endif
-	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
-	printf ("IRQs:\n");
-	printf ("  PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
-#if !defined(CONFIG_MIP405T)
-	printf ("  UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
-	printf ("  UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
-#endif
-	printf ("  PIIX SMI:  %s\n", (irq_reg & 0x10) ? "inactive" : "active");
-	printf ("  PIIX INIT: %s\n", (irq_reg & 0x8) ? "inactive" : "active");
-	printf ("  PIIX NMI:  %s\n", (irq_reg & 0x4) ? "inactive" : "active");
-}
diff --git a/board/mpl/mip405/mip405.h b/board/mpl/mip405/mip405.h
deleted file mode 100644
index b1d91deece..0000000000
--- a/board/mpl/mip405/mip405.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
- /****************************************************************************
- * Global routines used for MIP405
- *****************************************************************************/
-#ifndef __ASSEMBLY__
-/*int switch_cs(unsigned char boot);*/
-
-extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
-
-void user_led0(unsigned char on);
-
-
-#endif
-/* timings */
-/* PLD (CS7) */
-#define PLD_BME	0 	/* Burst disable */
-#define PLD_TWE	5	/* 5 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define PLD_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define PLD_OEN	1	/* Cycles from CS low to OE low   */
-#define PLD_WBN	1	/* Cycles from CS low to WE low   */
-#define PLD_WBF	1	/* Cycles from WE high to CS high */
-#define PLD_TH	2	/* Number of hold cycles after transfer */
-#define PLD_RE	0	/* Ready disabled */
-#define PLD_SOR	1	/* Sample on Ready disabled */
-#define PLD_BEM	0	/* Byte Write only active on Write cycles */
-#define PLD_PEN	0	/* Parity disable */
-#define PLD_AP 	((PLD_BME << 31) + (PLD_TWE << 23) + (PLD_CSN << 18) + (PLD_OEN << 16) + (PLD_WBN << 14) + \
-					(PLD_WBF << 12) + (PLD_TH << 9) + (PLD_RE << 8) + (PLD_SOR << 7) + (PLD_BEM << 6) + (PLD_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define PLD_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define PLD_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define PLD_BW	0	/* 16Bit */
-#define PLD_CR	((PER_PLD_ADDR & 0xfff00000) + (PLD_BS << 17) + (PLD_BU << 15) + (PLD_BW << 13))
-
-
-/* timings */
-
-#define PER_BOARD_ADDR (PER_UART1_ADDR+(1024*1024))
-/* Dummy CS to get the board revision */
-#define BOARD_BME	0 	/* Burst disable */
-#define BOARD_TWE	255	/* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define BOARD_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define BOARD_OEN	1	/* Cycles from CS low to OE low   */
-#define BOARD_WBN	1	/* Cycles from CS low to WE low   */
-#define BOARD_WBF	1	/* Cycles from WE high to CS high */
-#define BOARD_TH	2	/* Number of hold cycles after transfer */
-#define BOARD_RE	0	/* Ready disabled */
-#define BOARD_SOR	1	/* Sample on Ready disabled */
-#define BOARD_BEM	0	/* Byte Write only active on Write cycles */
-#define BOARD_PEN	0	/* Parity disable */
-#define BOARD_AP 	((BOARD_BME << 31) + (BOARD_TWE << 23) + (BOARD_CSN << 18) + (BOARD_OEN << 16) + (BOARD_WBN << 14) + \
-					(BOARD_WBF << 12) + (BOARD_TH << 9) + (BOARD_RE << 8) + (BOARD_SOR << 7) + (BOARD_BEM << 6) + (BOARD_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define BOARD_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define BOARD_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define BOARD_BW	0	/* 16Bit */
-#define BOARD_CR	((PER_BOARD_ADDR & 0xfff00000) + (BOARD_BS << 17) + (BOARD_BU << 15) + (BOARD_BW << 13))
-
-
-/* UART0 CS2 */
-#define UART0_BME	0 	/* Burst disable */
-#define UART0_TWE	7	/* 7 * 30ns 210ns Waitstates (access=TWT+1+TH) */
-#define UART0_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define UART0_OEN	1	/* Cycles from CS low to OE low   */
-#define UART0_WBN	1	/* Cycles from CS low to WE low   */
-#define UART0_WBF	1	/* Cycles from WE high to CS high */
-#define UART0_TH	2	/* Number of hold cycles after transfer */
-#define UART0_RE	0	/* Ready disabled */
-#define UART0_SOR	1	/* Sample on Ready disabled */
-#define UART0_BEM	0	/* Byte Write only active on Write cycles */
-#define UART0_PEN	0	/* Parity disable */
-#define UART0_AP 	((UART0_BME << 31) + (UART0_TWE << 23) + (UART0_CSN << 18) + (UART0_OEN << 16) + (UART0_WBN << 14) + \
-					(UART0_WBF << 12) + (UART0_TH << 9) + (UART0_RE << 8) + (UART0_SOR << 7) + (UART0_BEM << 6) + (UART0_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define UART0_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define UART0_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define UART0_BW	0	/* 8Bit */
-#define UART0_CR	((PER_UART0_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
-/* UART1 CS3 */
-#define UART1_AP UART0_AP /* same timing as UART0 */
-#define UART1_CR	((PER_UART1_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
-
-/* Flash CS0 or CS 1 */
-/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B	1 	/* Burst enable */
-#define FLASH_FWT_B	0x6	/* 6 * 30ns 210ns First Wait Access */
-#define FLASH_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME	0 	/* Burst disable */
-#define FLASH_TWE	0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define FLASH_CSN	0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define FLASH_OEN	1	/* Cycles from CS low to OE low   */
-#define FLASH_WBN	1	/* Cycles from CS low to WE low   */
-#define FLASH_WBF	1	/* Cycles from WE high to CS high */
-#define FLASH_TH	2	/* Number of hold cycles after transfer */
-#define FLASH_RE	0	/* Ready disabled */
-#define FLASH_SOR	1	/* Sample on Ready disabled */
-#define FLASH_BEM	0	/* Byte Write only active on Write cycles */
-#define FLASH_PEN	0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define FLASH_AP 	((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-					(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-/* Access Parameter Register for Boot */
-#define FLASH_AP_B 	((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-					(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS	FLASH_SIZE_PRELIM	/* 4 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define FLASH_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define FLASH_BW	1	/* 16Bit */
-/* CR register for Boot */
-#define FLASH_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-/* CR register for non Boot */
-#define FLASH_CR	((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-
-/* MPS CS1 or CS0 */
-/* Boot CS: */
-#define MPS_BME_B	1 	/* Burst enable */
-#define MPS_FWT_B	0x6/* 6 * 30ns 210ns First Wait Access */
-#define MPS_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME		0 	/* Burst disable */
-#define MPS_TWE		0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define MPS_CSN		0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define MPS_OEN		1	/* Cycles from CS low to OE low   */
-#define MPS_WBN		1	/* Cycles from CS low to WE low   */
-#define MPS_WBF		1	/* Cycles from WE high to CS high */
-#define MPS_TH		2	/* Number of hold cycles after transfer */
-#define MPS_RE		0	/* Ready disabled */
-#define MPS_SOR		1	/* Sample on Ready disabled */
-#define MPS_BEM		0	/* Byte Write only active on Write cycles */
-#define MPS_PEN		0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define MPS_AP 		((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-					(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-/* Access Parameter Register for Boot */
-#define MPS_AP_B 		((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-					(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define MPS_BS		2	/* 4 MByte */
-#define MPS_BS_B		FLASH_SIZE_PRELIM	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define MPS_BU		3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define MPS_BW		0	/* 8Bit */
-/* CR register for Boot */
-#define MPS_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS_B << 17) + (MPS_BU << 15) + (MPS_BW << 13))
-/* CR register for non Boot */
-#define MPS_CR		((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds
deleted file mode 100644
index ad5f2739ca..0000000000
--- a/board/mpl/mip405/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-  .bootpg 0xFFFFF000 :
-  {
-    board/mpl/mip405/init.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/mpl/mip405/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile
deleted file mode 100644
index 82c97d6d5d..0000000000
--- a/board/mpl/pati/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:=  pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
-#### cmd_pati.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
deleted file mode 100644
index 98429c033d..0000000000
--- a/board/mpl/pati/cmd_pati.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Adapted for PATI
- */
-
-#include <common.h>
-#include <command.h>
-#define PLX9056_LOC
-#include "plx9056.h"
-#include "pati.h"
-#include "pci_eeprom.h"
-
-extern void show_pld_regs(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-extern void user_led0(int led_on);
-extern void user_led1(int led_on);
-
-/* ------------------------------------------------------------------------- */
-#if defined(CFG_PCI_CON_DEVICE)
-extern void pci_con_disc(void);
-extern void pci_con_connect(void);
-#endif
-
-/******************************************************************************
- * Eeprom Support
- ******************************************************************************/
-unsigned long get32(unsigned long addr)
-{
-	unsigned long *p=(unsigned long *)addr;
-	return *p;
-}
-
-void set32(unsigned long addr,unsigned long data)
-{
-	unsigned long *p=(unsigned long *)addr;
-	*p=data;
-}
-
-#define PCICFG_GET_REG(x)	(get32((x) + PCI_CONFIG_BASE))
-#define PCICFG_SET_REG(x,y)	(set32((x) + PCI_CONFIG_BASE,(y)))
-
-
-/******************************************************************************
- * reload_pci_eeprom
- ******************************************************************************/
-
-static void reload_pci_eeprom(void)
-{
-	unsigned long reg;
-	/* Set Bit 29 and clear it again */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	udelay(1);
-	/* set it*/
-	reg|=(1<<29);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	/* EECLK @ 33MHz = 125kHz
-	 * -> extra long load = 32 * 16bit = 512Bit @ 125kHz = 4.1msec
-	 * use 20msec
-	 */
-	udelay(20000); /* wait 20ms */
-	reg &= ~(1<<29); /* set it low */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-}
-
-/******************************************************************************
- * clock_pci_eeprom
- ******************************************************************************/
-
-static void clock_pci_eeprom(void)
-{
-	unsigned long reg;
-	/* clock is low, data is valid */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	udelay(1);
-	/* set clck high */
-	reg|=(1<<24);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-	reg &= ~(1<<24); /* set clock low */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-}
-
-/******************************************************************************
- * send_pci_eeprom_cmd
- ******************************************************************************/
-static void send_pci_eeprom_cmd(unsigned long cmd, unsigned char len)
-{
-	unsigned long reg;
-	int i;
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Clear all EEPROM bits */
-	reg &= ~(0xF << 24);
-	/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-	/* Enable EEPROM Chip Select */
-	reg |= (1 << 25);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	/* Send EEPROM command - one bit at a time */
-	for (i = (int)(len-1); i >= 0; i--) {
-		/* Check if current bit is 0 or 1 */
-		if (cmd & (1 << i))
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
-		else
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-		clock_pci_eeprom();
-	}
-}
-
-/******************************************************************************
- * write_pci_eeprom_offs
- ******************************************************************************/
-static void write_pci_eeprom_offs(unsigned short offset, unsigned short value)
-{
-	unsigned long reg;
-	int bitpos, cmdshft, cmdlen, timeout;
-	/* we're using the Eeprom 93CS66 */
-	cmdshft  = 2;
-	cmdlen = EE66_CMD_LEN;
-	/* Send Write_Enable command to EEPROM */
-	send_pci_eeprom_cmd((EE_WREN << cmdshft),cmdlen);
-	/* Send EEPROM Write command and offset to EEPROM */
-	send_pci_eeprom_cmd((EE_WRITE << cmdshft) | (offset / 2),cmdlen);
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Clear all EEPROM bits */
-	reg &= ~(0xF << 24);
-	/* Make sure EEDO Input is disabled for some PLX chips */
-	reg &= ~(1 << 31);
-	/* Enable EEPROM Chip Select */
-	reg |= (1 << 25);
-	/* Write 16-bit value to EEPROM - one bit at a time */
-	for (bitpos = 15; bitpos >= 0; bitpos--) {
-		/* Get bit value and shift into result */
-		if (value & (1 << bitpos))
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
-		else
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg );
-		clock_pci_eeprom();
-	} /* for */
-	/* Deselect Chip */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(1 << 25));
-	/* Re-select Chip */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 25));
-	/* A small delay is needed to let EEPROM complete */
-	timeout = 0;
-	do {
-		udelay(10);
-		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-		timeout++;
-	} while (((reg & (1 << 27)) == 0) && timeout < 20000);
-	/* Send Write_Disable command to EEPROM */
-	send_pci_eeprom_cmd((EE_WDS << cmdshft),cmdlen);
-	/* Clear Chip Select and all other EEPROM bits */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
-}
-
-
-/******************************************************************************
- * read_pci_eeprom_offs
- ******************************************************************************/
-static void read_pci_eeprom_offs(unsigned short offset, unsigned short *pvalue)
-{
-	unsigned long reg;
-	int bitpos, cmdshft, cmdlen;
-	/* we're using the Eeprom 93CS66 */
-	cmdshft  = 2;
-	cmdlen = EE66_CMD_LEN;
-	/* Send EEPROM read command and offset to EEPROM */
-	send_pci_eeprom_cmd((EE_READ << cmdshft) | (offset / 2),cmdlen);
-	/* Set EEPROM write output bit */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Set EEDO Input enable */
-	reg |= (1 << 31);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 26));
-	/* Get 16-bit value from EEPROM - one bit at a time */
-	for (bitpos = 0; bitpos < 16; bitpos++) {
-		clock_pci_eeprom();
-		udelay(10);
-		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-		/* Get bit value and shift into result */
-		if (reg & (1 << 27))
-			*pvalue = (unsigned short)((*pvalue << 1) | 1);
-		else
-			*pvalue = (unsigned short)(*pvalue << 1);
-	}
-	/* Clear EEDO Input enable */
-	reg &= ~(1 << 31);
-	/* Clear Chip Select and all other EEPROM bits */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
-}
-
-
-/******************************************************************************
- * EEPROM read/writes
-******************************************************************************/
-
-#undef EEPROM_DBG
-static int pati_pci_eeprom_erase(void)
-{
-	int i;
-	printf("Erasing EEPROM ");
-	for( i=0; i < PATI_EEPROM_LAST_OFFSET; i+=2) {
-		write_pci_eeprom_offs(i,0xffff);
-		if((i%0x10))
-			printf(".");
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_prg(void)
-{
-	int i;
-	i=0;
-	printf("Programming EEPROM ");
-	while(pati_eeprom[i].offset<0xffff) {
-		write_pci_eeprom_offs(pati_eeprom[i].offset,pati_eeprom[i].value);
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",pati_eeprom[i].offset, pati_eeprom[i].value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-		i++;
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_write(unsigned short offset, unsigned long addr, unsigned short size)
-{
-	int i;
-	unsigned short value;
-	unsigned short *buffer =(unsigned short *)addr;
-	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
-		size = PATI_EEPROM_LAST_OFFSET - offset;
-	}
-	printf("Write To EEPROM from 0x%lX to 0x%X 0x%X words\n", addr, offset, size/2);
-	for( i = offset; i< (offset + size); i+=2) {
-		value = *buffer++;
-		write_pci_eeprom_offs(i,value);
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",i, value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_read(unsigned short offset, unsigned long addr, unsigned short size)
-{
-	int i;
-	unsigned short value;
-	unsigned short *buffer =(unsigned short *)addr;
-	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
-		size = PATI_EEPROM_LAST_OFFSET - offset;
-	}
-	printf("Read from EEPROM from 0x%X to 0x%lX 0x%X words\n", offset, addr, size/2);
-	for( i = offset; i< (offset + size); i+=2) {
-		read_pci_eeprom_offs(i,&value);
-		*buffer++=value;
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",i, value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-/******************************************************************************
- * PCI Bridge Registers Dump
-*******************************************************************************/
-static void display_pci_regs(void)
-{
-	printf(" PCI9056_SPACE0_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_RANGE));
-	printf(" PCI9056_SPACE0_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_REMAP));
-	printf(" PCI9056_LOCAL_DMA_ARBIT  %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_DMA_ARBIT));
-	printf(" PCI9056_ENDIAN_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_ENDIAN_DESC));
-	printf(" PCI9056_EXP_ROM_RANGE    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_RANGE));
-	printf(" PCI9056_EXP_ROM_REMAP    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_REMAP));
-	printf(" PCI9056_SPACE0_ROM_DESC  %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_ROM_DESC));
-	printf(" PCI9056_DM_RANGE         %08lX\n",PCICFG_GET_REG(PCI9056_DM_RANGE));
-	printf(" PCI9056_DM_MEM_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_DM_MEM_BASE));
-	printf(" PCI9056_DM_IO_BASE       %08lX\n",PCICFG_GET_REG(PCI9056_DM_IO_BASE));
-	printf(" PCI9056_DM_PCI_MEM_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_MEM_REMAP));
-	printf(" PCI9056_DM_PCI_IO_CONFIG %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_IO_CONFIG));
-	printf(" PCI9056_SPACE1_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_RANGE));
-	printf(" PCI9056_SPACE1_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_REMAP));
-	printf(" PCI9056_SPACE1_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_DESC));
-	printf(" PCI9056_DM_DAC           %08lX\n",PCICFG_GET_REG(PCI9056_DM_DAC));
-	printf(" PCI9056_MAILBOX0         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX0));
-	printf(" PCI9056_MAILBOX1         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX1));
-	printf(" PCI9056_MAILBOX2         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX2));
-	printf(" PCI9056_MAILBOX3         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX3));
-	printf(" PCI9056_MAILBOX4         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX4));
-	printf(" PCI9056_MAILBOX5         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX5));
-	printf(" PCI9056_MAILBOX6         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX6));
-	printf(" PCI9056_MAILBOX7         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX7));
-	printf(" PCI9056_PCI_TO_LOC_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_PCI_TO_LOC_DBELL));
-	printf(" PCI9056_LOC_TO_PCI_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_LOC_TO_PCI_DBELL));
-	printf(" PCI9056_INT_CTRL_STAT    %08lX\n",PCICFG_GET_REG(PCI9056_INT_CTRL_STAT));
-	printf(" PCI9056_EEPROM_CTRL_STAT %08lX\n",PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT));
-	printf(" PCI9056_PERM_VENDOR_ID   %08lX\n",PCICFG_GET_REG(PCI9056_PERM_VENDOR_ID));
-	printf(" PCI9056_REVISION_ID      %08lX\n",PCICFG_GET_REG(PCI9056_REVISION_ID));
-	printf(" \n");
-	printf(" PCI9056_VENDOR_ID        %08lX\n",PCICFG_GET_REG(PCI9056_VENDOR_ID));
-	printf(" PCI9056_COMMAND          %08lX\n",PCICFG_GET_REG(PCI9056_COMMAND));
-	printf(" PCI9056_REVISION         %08lX\n",PCICFG_GET_REG(PCI9056_REVISION));
-	printf(" PCI9056_CACHE_SIZE       %08lX\n",PCICFG_GET_REG(PCI9056_CACHE_SIZE));
-	printf(" PCI9056_RTR_BASE         %08lX\n",PCICFG_GET_REG(PCI9056_RTR_BASE));
-	printf(" PCI9056_RTR_IO_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_RTR_IO_BASE));
-	printf(" PCI9056_LOCAL_BASE0      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE0));
-	printf(" PCI9056_LOCAL_BASE1      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE1));
-	printf(" PCI9056_UNUSED_BASE1     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE1));
-	printf(" PCI9056_UNUSED_BASE2     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE2));
-	printf(" PCI9056_CIS_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CIS_PTR));
-	printf(" PCI9056_SUB_ID           %08lX\n",PCICFG_GET_REG(PCI9056_SUB_ID));
-	printf(" PCI9056_EXP_ROM_BASE     %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_BASE));
-	printf(" PCI9056_CAP_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CAP_PTR));
-	printf(" PCI9056_INT_LINE         %08lX\n",PCICFG_GET_REG(PCI9056_INT_LINE));
-	printf(" PCI9056_PM_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_PM_CAP_ID));
-	printf(" PCI9056_PM_CSR           %08lX\n",PCICFG_GET_REG(PCI9056_PM_CSR));
-	printf(" PCI9056_HS_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_HS_CAP_ID));
-	printf(" PCI9056_VPD_CAP_ID       %08lX\n",PCICFG_GET_REG(PCI9056_VPD_CAP_ID));
-	printf(" PCI9056_VPD_DATA         %08lX\n",PCICFG_GET_REG(PCI9056_VPD_DATA));
-}
-
-
-int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	if (strcmp(argv[1], "info") == 0)
-	{
-		show_pld_regs();
-	 	return 0;
-	}
-	if (strcmp(argv[1], "pci") == 0)
-	{
-		display_pci_regs();
-	 	return 0;
-	}
-	if (strcmp(argv[1], "led") == 0)
-	{
-		int led_nr,led_on;
-		led_nr = (int)simple_strtoul(argv[2], NULL, 10);
-		led_on = (int)simple_strtoul(argv[3], NULL, 10);
-		if(!led_nr)
-			user_led0(led_on);
-		else
-			user_led1(led_on);
-		return 0;
-   	}
-#if defined(CFG_PCI_CON_DEVICE)
-	if (strcmp(argv[1], "con") == 0) {
-		pci_con_connect();
-		return 0;
-	}
-	if (strcmp(argv[1], "disc") == 0) {
-		pci_con_disc();
-		return 0;
-	}
-#endif
-	if (strcmp(argv[1], "eeprom") == 0) {
-		unsigned long addr;
-		int size, offset;
-		offset = 0;
-		size = PATI_EEPROM_LAST_OFFSET;
-		if(argc>2) {
-			if(argc>3) {
-				addr = simple_strtoul(argv[3], NULL, 16);
-				if(argc>4)
-					offset = (int) simple_strtoul(argv[4], NULL, 16);
-				if(argc>5)
-					size = (int) simple_strtoul(argv[5], NULL, 16);
-				if (strcmp(argv[2], "read") == 0) {
-					return (pati_pci_eeprom_read(offset, addr, size));
-				}
-				if (strcmp(argv[2], "write") == 0) {
-					return (pati_pci_eeprom_write(offset, addr, size));
-				}
-			}
-			if (strcmp(argv[2], "prg") == 0) {
-				return (pati_pci_eeprom_prg());
-			}
-			if (strcmp(argv[2], "era") == 0) {
-				return (pati_pci_eeprom_erase());
-			}
-			if (strcmp(argv[2], "reload") == 0) {
-				reload_pci_eeprom();
-				return 0;
-			}
-
-
-		}
-	}
-
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-
-U_BOOT_CMD(
-	pati,	8,	1,	do_pati,
-	"pati    - PATI specific Cmds\n",
-	"info - displays board information\n"
-	"pati pci  - displays PCI registers\n"
-	"pati led <nr> <on> \n"
-	"          - switch LED <nr> <on>\n"
-	"pati flash mem [SrcAddr]\n"
-	"          - updates U-Boot with image in memory\n"
-	"pati eeprom <cmd> - PCI EEPROM sub-system\n"
-	"    read <addr> <offset> <size>\n"
-	"          - read PCI EEPROM to <addr> from <offset> <size> words\n"
-	"    write <addr> <offset> <size>\n"
-	"          - write PCI EEPROM from <addr> to <offset> <size> words\n"
-	"    prg   - programm PCI EEPROM with default values\n"
-	"    era   - erase PCI EEPROM (write all word to 0xffff)\n"
-	"    reload- Reload PCI Bridge with EEPROM Values\n"
-	"    NOTE: <addr> must start on word boundary\n"
-	"          <offset> and <size> must be even byte values\n"
-);
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pati/config.mk b/board/mpl/pati/config.mk
deleted file mode 100644
index b8a098591e..0000000000
--- a/board/mpl/pati/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EPQ Board Configuration
-#
-
-# Boot from flash at location 0x00000000
-TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
deleted file mode 100644
index 0355b65b84..0000000000
--- a/board/mpl/pati/pati.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- * Atapted for PATI
- * Denis Peter, d.peter@mpl.ch
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/***********************************************************************************
- * Bits for the SDRAM controller
- * -----------------------------
- *
- * CAL:	CAS Latency. If cleared to 0 (default) the SDRAM controller asserts TA# on
- *	the 2nd Clock after ACTIVE command (CAS Latency = 2). If set to 1 the SDRAM
- *	controller asserts TA# on the 3rd Clock after ACTIVE command (CAS Latency = 3).
- * RCD:	RCD ACTIVE to READ or WRITE Delay (Ras to Cas Delay). If cleared 0 (default)
- *	tRCD of the SDRAM must equal or less 25ns. If set to 1 tRCD must be equal or less 50ns.
- * WREC:Write Recovery. If cleared 0 (default) tWR of the SDRAM must equal or less 25ns.
- *	If set to 1 tWR must be equal or less 50ns.
- * RP:	Precharge Command Time. If cleared 0 (default) tRP of the SDRAM must equal or less
- *	25ns. If set to 1 tRP must be equal or less 50ns.
- * RC:	Auto Refresh to Active Time. If cleared 0 (default) tRC of the SDRAM must equal
- *	or less 75ns. If set to 1 tRC must be equal or less 100ns.
- * LMR:	Bit to set the Mode Register of the SDRAM. If set, the next access to the SDRAM
- *	is the Load Mode Register Command.
- * IIP:	Init in progress. Set to 1 for starting the init sequence
- *	(Precharge All). As long this bit is set, the Precharge All is still in progress.
- *	After command has completed, wait at least for 8 refresh (200usec) before proceed.
- **********************************************************************************/
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <devices.h>
-#include <pci_ids.h>
-#define PLX9056_LOC
-#include "plx9056.h"
-#include "pati.h"
-
-#if defined(__APPLE__)
-/* Leading underscore on symbols */
-#  define SYM_CHAR "_"
-#else /* No leading character on symbols */
-#  define SYM_CHAR
-#endif
-
-#undef SDRAM_DEBUG
-/*
- * Macros to generate global absolutes.
- */
-#define GEN_SYMNAME(str) SYM_CHAR #str
-#define GEN_VALUE(str) #str
-#define GEN_ABS(name, value) \
-		asm (".globl " GEN_SYMNAME(name)); \
-		asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
-
-
-/************************************************************************
- * Early debug routines
- */
-void write_hex (unsigned char i)
-{
-	char cc;
-
-	cc = i >> 4;
-	cc &= 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-	cc = i & 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-}
-
-#if defined(SDRAM_DEBUG)
-
-void write_4hex (unsigned long val)
-{
-	write_hex ((unsigned char) (val >> 24));
-	write_hex ((unsigned char) (val >> 16));
-	write_hex ((unsigned char) (val >> 8));
-	write_hex ((unsigned char) val);
-}
-
-#endif
-
-unsigned long in32(unsigned long addr)
-{
-	unsigned long *p=(unsigned long *)addr;
-	return *p;
-}
-
-void out32(unsigned long addr,unsigned long data)
-{
-	unsigned long *p=(unsigned long *)addr;
-	*p=data;
-}
-
-typedef struct {
-	unsigned short boardtype; /* Board revision and Population Options */
-	unsigned char cal;		/* cas Latency  0:CAL=2 1:CAL=3 */
-	unsigned char rcd;		/* ras to cas delay  0:<25ns 1:<50ns*/
-	unsigned char wrec;		/* write recovery 0:<25ns 1:<50ns */
-	unsigned char pr;		/* Precharge Command Time 0:<25ns 1:<50ns */
-	unsigned char rc;		/* Auto Refresh to Active Time 0:<75ns 1:<100ns */
-	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
-} sdram_t;
-
-const sdram_t sdram_table[] = {
-	{ 0x0000,	/* PATI Rev A, 16MByte -1 Board */
-		1,	/* Case Latenty = 3 */
-		0,	/* ras to cas delay  0 (20ns) */
-		0,	/* write recovery 0:<25ns 1:<50ns*/
-		0,	/* Precharge Command Time 0 (20ns) */
-		0,	/* Auto Refresh to Active Time 0 (68) */
-		2	/* log binary => Size 2 = 16MByte, 1=8 */
-	},
-	{ 0xffff, /* terminator */
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff }
-};
-
-
-extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
-extern void mem_test_reloc(void);
-
-/*
- * Get RAM size.
- */
-long int initdram(int board_type)
-{
-	unsigned char board_rev;
-	unsigned long reg;
-	unsigned long lmr;
-	int i,timeout;
-
-#if defined(SDRAM_DEBUG)
-	reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
-	puts("\n\nSYSTEM part 0x"); write_4hex(SYSCNTR_PART(reg));
-	puts(" Vers 0x"); write_4hex(SYSCNTR_ID(reg));
-	puts("\nSDRAM  part  0x"); write_4hex(SDRAM_PART(reg));
-	puts(" Vers 0x"); write_4hex(SDRAM_ID(reg));
-	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
-	puts("\nBoard rev.   0x"); write_4hex(SYSCNTR_BREV(reg));
-   putc('\n');
-#endif
-	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
-	board_rev=(unsigned char)(SYSCNTR_BREV(reg));
-	i=0;
-	while(1) {
-		if(sdram_table[i].boardtype==0xffff) {
-			puts("ERROR, found no table for Board 0x");
-			write_hex(board_rev);
-			while(1);
-		}
-		if(sdram_table[i].boardtype==(unsigned char)board_rev)
-			break;
-		i++;
-	}
-	/* Set CAL, RCD, WREQ, PR and RC Bits */
-#if defined(SDRAM_DEBUG)
-	puts("Set CAL, RCD, WREQ, PR and RC Bits\n");
-#endif
-	/* mask bits */
-	reg &= ~(SET_REG_BIT(1,SDRAM_CAL) | SET_REG_BIT(1,SDRAM_RCD) | SET_REG_BIT(1,SDRAM_WREQ) |
-				SET_REG_BIT(1,SDRAM_PR)  |  SET_REG_BIT(1,SDRAM_RC) | SET_REG_BIT(1,SDRAM_LMR)  |
-				SET_REG_BIT(1,SDRAM_IIP) | SET_REG_BIT(1,SDRAM_RES0));
-	/* set bits */
-	reg |= (SET_REG_BIT(sdram_table[i].cal,SDRAM_CAL) |
-			  SET_REG_BIT(sdram_table[i].rcd,SDRAM_RCD) |
-			  SET_REG_BIT(sdram_table[i].wrec,SDRAM_WREQ) |
-			  SET_REG_BIT(sdram_table[i].pr,SDRAM_PR) |
-			  SET_REG_BIT(sdram_table[i].rc,SDRAM_RC));
-
-	out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
-	/* step 2 set IIP */
-#if defined(SDRAM_DEBUG)
-	puts("step 2 set IIP\n");
-#endif
-	/* step 2 set IIP */
-	reg |= SET_REG_BIT(1,SDRAM_IIP);
-	timeout=0;
-	while (timeout!=0xffff) {
-		__asm__ volatile("eieio");
-		reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
-		if((reg & SET_REG_BIT(1,SDRAM_IIP))==0)
-			break;
-		timeout++;
-		udelay(1);
-	}
-	/* wait for at least 8 refresh */
-	udelay(1000);
-	/* set LMR */
-	reg |= SET_REG_BIT(1,SDRAM_LMR);
-	out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
-	__asm__ volatile("eieio");
-	lmr=0x00000002; /* sequential burst 4 data */
-	if(sdram_table[i].cal==1)
-		lmr|=0x00000030; /* cal = 3 */
-	else
-		lmr|=0000000020; /* cal = 2 */
-	/* rest standard operation programmed write burst length */
-	/* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
-	lmr<<=2;
-	in32(CFG_SDRAM_BASE + lmr);
-	/* ok, we're done, return SDRAM size */
-	return ((0x400000 << sdram_table[i].sz));		/* log2 value of 4MByte  */
-}
-
-
-void set_flash_vpp(int ext_vpp, int ext_wp, int int_vpp)
-{
-	unsigned long reg;
-	reg=in32(PLD_CONF_REG2+PLD_CONFIG_BASE);
-	reg &= ~(SET_REG_BIT(1,SYSCNTR_CPU_VPP) |
-			   SET_REG_BIT(1,SYSCNTR_FL_VPP) |
-				SET_REG_BIT(1,SYSCNTR_FL_WP));
-
-	reg |= (SET_REG_BIT(int_vpp,SYSCNTR_CPU_VPP) |
-			   SET_REG_BIT(ext_vpp,SYSCNTR_FL_VPP) |
-				SET_REG_BIT(ext_wp,SYSCNTR_FL_WP));
-	out32(PLD_CONF_REG2+PLD_CONFIG_BASE,reg);
-	udelay(100);
-}
-
-
-void show_pld_regs(void)
-{
-	unsigned long reg,reg1;
-	reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
-	printf("\nSYSTEM part %ld, Vers %ld\n",SYSCNTR_PART(reg),SYSCNTR_ID(reg));
-	printf("SDRAM  part %ld, Vers %ld\n",SDRAM_PART(reg),SDRAM_ID(reg));
-	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
-	printf("Board rev.  %c\n",(char) (SYSCNTR_BREV(reg)+'A'));
-	printf("Waitstates  %ld\n",GET_SYSCNTR_FLWAIT(reg));
-	printf("SDRAM:      CAL=%ld RCD=%ld WREQ=%ld PR=%ld\n            RC=%ld  LMR=%ld IIP=%ld\n",
-		GET_REG_BIT(reg,SDRAM_CAL),GET_REG_BIT(reg,SDRAM_RCD),
-		GET_REG_BIT(reg,SDRAM_WREQ),GET_REG_BIT(reg,SDRAM_PR),
-		GET_REG_BIT(reg,SDRAM_RC),GET_REG_BIT(reg,SDRAM_LMR),
-		GET_REG_BIT(reg,SDRAM_IIP));
-	reg=in32(PLD_CONFIG_BASE+PLD_CONF_REG1);
-	reg1=in32(PLD_CONFIG_BASE+PLD_CONF_REG2);
-	printf("HW Config:  FLAG=%ld IP=%ld  index=%ld PRPM=%ld\n            ICW=%ld  ISB=%ld BDIS=%ld  PCIM=%ld\n",
-		GET_REG_BIT(reg,SYSCNTR_FLAG),GET_REG_BIT(reg,SYSCNTR_IP),
-		GET_SYSCNTR_BOOTIND(reg),GET_REG_BIT(reg,SYSCNTR_PRM),
-		GET_REG_BIT(reg,SYSCNTR_ICW),GET_SYSCNTR_ISB(reg),
-		GET_REG_BIT(reg1,SYSCNTR_BDIS),GET_REG_BIT(reg1,SYSCNTR_PCIM));
-	printf("Switches:   MUX=%ld PCI_DIS=%ld Boot_EN=%ld  Config=%ld\n",GET_SDRAM_MUX(reg),
-		GET_REG_BIT(reg,SDRAM_PDIS),GET_REG_BIT(reg1,SYSCNTR_BOOTEN),
-		GET_SYSCNTR_CFG(reg1));
-	printf("Misc:       RIP=%ld CPU_VPP=%ld FLSH_VPP=%ld FLSH_WP=%ld\n\n",
-		GET_REG_BIT(reg,SDRAM_RIP),GET_REG_BIT(reg1,SYSCNTR_CPU_VPP),
-		GET_REG_BIT(reg1,SYSCNTR_FL_VPP),GET_REG_BIT(reg1,SYSCNTR_FL_WP));
-}
-
-
-/****************************************************************
- * Setting IOs
- * -----------
- * GPIO6 is User LED1
- * GPIO7 is Interrupt PLX (Output)
- * GPIO5 is User LED0
- * GPIO2 is PLX USERi (Output)
- * GPIO1 is PLX Interrupt (Input)
- ****************************************************************/
- void init_ios(void)
- {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
-	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
-	unsigned long reg;
-	reg=sysconf->sc_sgpiocr; /* Data direction register */
-	reg &= ~0x67000000;
-	reg |= 0x27000000; /* set outpupts */
-	sysconf->sc_sgpiocr=reg; /* Data direction register */
-	reg=sysconf->sc_sgpiodt2; /* Data register */
-	/* set output to 0 */
-	reg &= ~0x27000000;
-	/* set IRQ and USERi to 1 */
-	reg |= 0x28000000;
-	sysconf->sc_sgpiodt2=reg; /* Data register */
-}
-
-void user_led0(int led_on)
-{
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
-	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
-	unsigned long reg;
-	reg=sysconf->sc_sgpiodt2; /* Data register */
-	if(led_on)	/* set output to 1 */
-		reg |= 0x04000000;
-	else
-		reg &= ~0x04000000;
-	sysconf->sc_sgpiodt2=reg; /* Data register */
-}
-
-void user_led1(int led_on)
-{
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
-	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
-	unsigned long reg;
-	reg=sysconf->sc_sgpiodt2; /* Data register */
-	if(led_on)	/* set output to 1 */
-		reg |= 0x02000000;
-	else
-		reg &= ~0x02000000;
-	sysconf->sc_sgpiodt2=reg; /* Data register */
-}
-
-
-/****************************************************************
- * Last Stage Init
- ****************************************************************/
-int last_stage_init (void)
-{
-	mem_test_reloc();
-	init_ios();
-	return 0;
-}
-
-/****************************************************************
- * Check the board
- ****************************************************************/
-
-#define BOARD_NAME	"PATI"
-
-int checkboard (void)
-{
-	unsigned char s[50];
-	unsigned long reg;
-	char rev;
-	int i;
-
-	puts ("\nBoard: ");
-	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
-	rev=(char)(SYSCNTR_BREV(reg)+'A');
-	i = getenv_r ("serial#", s, 32);
-	if ((i == -1)) {
-		puts ("### No HW ID - assuming " BOARD_NAME);
-		printf(" Rev. %c\n",rev);
-	}
-	else {
-		s[sizeof(BOARD_NAME)-1] = 0;
-		printf ("%s-1 Rev %c SN: %s\n", s,rev,
-				&s[sizeof(BOARD_NAME)]);
-	}
-	set_flash_vpp(1,0,0); /* set Flash VPP */
-	return 0;
-}
-
-
-#ifdef CFG_PCI_CON_DEVICE
-/************************************************************************
- * PCI Communication
- *
- * Alive (Pinging):
- * ----------------
- * PCI Host sends message ALIVE, Local acknowledges with ALIVE
- *
- * PCI_CON console over PCI:
- * -------------------------
- * Local side:
- *     - uses PCI9056_LOC_TO_PCI_DBELL register to signal that
- *       data is avaible (PCIMSG_CONN)
- *     - uses PCI9056_MAILBOX1 to send data
- *     - uses PCI9056_MAILBOX0 to receive data
- * PCI side:
- *     - uses PCI9056_PCI_TO_LOC_DBELL register to signal that
- *       data is avaible (PCIMSG_CONN)
- *     - uses PCI9056_MAILBOX0 to send data
- *     - uses PCI9056_MAILBOX1 to receive data
- *
- * How it works:
- *     Send:
- *     - check if PCICON_TRANSMIT_REG is empty
- *     - write data or'ed with 0x80000000 into the PCICON_TRANSMIT_REG
- *     - write PCIMSG_CONN into the PCICON_DBELL_REG to signal a data
- *       is waiting
- *     Receive:
- *     - get an interrupt via the PCICON_ACK_REG register message
- *       PCIMSG_CONN
- *     - write the data from the PCICON_RECEIVE_REG into the receive
- *       buffer and if the receive buffer is not full, clear the
- *       PCICON_RECEIVE_REG (this allows the counterpart to write more data)
- *     - Clear the interrupt by writing 0xFFFFFFFF to the PCICON_ACK_REG
- *
- *     The PCICON_RECEIVE_REG must be cleared by the routine which reads
- *     the receive buffer if the buffer is not full any more
- *
- */
-
-#undef PCI_CON_DEBUG
-
-#ifdef	PCI_CON_DEBUG
-#define	PCI_CON_PRINTF(fmt,args...)	serial_printf (fmt ,##args)
-#else
-#define PCI_CON_PRINTF(fmt,args...)
-#endif
-
-
-/*********************************************************
- * we work only with a receive buffer on eiter side.
- * Transmit buffer is free, if mailbox is cleared.
- * Transmit character is or'ed with 0x80000000
- * PATI receive register MAILBOX0
- * PATI transmit register MAILBOX1
- *********************************************************/
-#define PCICON_RECEIVE_REG	PCI9056_MAILBOX0
-#define PCICON_TRANSMIT_REG	PCI9056_MAILBOX1
-#define PCICON_DBELL_REG	PCI9056_LOC_TO_PCI_DBELL
-#define PCICON_ACK_REG		PCI9056_PCI_TO_LOC_DBELL
-
-
-#define PCIMSG_ALIVE		0x1
-#define PCIMSG_CONN		0x2
-#define PCIMSG_DISC		0x3
-#define PCIMSG_CON_DATA	0x5
-
-
-#define PCICON_GET_REG(x)	(in32(x + PCI_CONFIG_BASE))
-#define PCICON_SET_REG(x,y)	(out32(x + PCI_CONFIG_BASE,y))
-#define PCICON_TX_FLAG		0x80000000
-
-
-#define REC_BUFFER_SIZE	0x100
-int recbuf[REC_BUFFER_SIZE];
-static int r_ptr = 0;
-int w_ptr;
-device_t pci_con_dev;
-int conn=0;
-int buff_full=0;
-
-void pci_con_put_it(const char c)
-{
-	/* Test for completition */
-	unsigned long reg;
-	do {
-		reg=PCICON_GET_REG(PCICON_TRANSMIT_REG);
-	}while(reg);
-	reg=PCICON_TX_FLAG + c;
-	PCICON_SET_REG(PCICON_TRANSMIT_REG,reg);
-	PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
-}
-
-void pci_con_putc(const char c)
-{
-	pci_con_put_it(c);
-	if(c == '\n')
-		pci_con_put_it('\r');
-}
-
-
-int pci_con_getc(void)
-{
-	int res;
-	int diff;
-	while(r_ptr==(volatile int)w_ptr);
-	res=recbuf[r_ptr++];
-	if(r_ptr==REC_BUFFER_SIZE)
-		r_ptr=0;
-	if(w_ptr<r_ptr)
-		diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
-	else
-		diff=r_ptr-w_ptr;
-	if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
-   		/* clear Mail box */
-			buff_full=0;
-			PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
-	}
-	return res;
-}
-
-int pci_con_tstc(void)
-{
-	if(r_ptr==(volatile int)w_ptr)
-		return 0;
-	return 1;
-}
-
-void pci_con_puts (const char *s)
-{
-	while (*s) {
-		pci_con_putc(*s);
-		++s;
-	}
-}
-
-void pci_con_init (void)
-{
-	w_ptr = 0;
-	r_ptr = 0;
-	PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
-	conn=1;
-}
-
-/*******************************************
- * IRQ routine
- ******************************************/
-int pci_dorbell_irq(void)
-{
-	unsigned long reg,data;
-	int diff;
-	reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
-	PCI_CON_PRINTF(" PCI9056_INT_CTRL_STAT = %08lX\n",reg);
-	if(reg & (1<<20) ) {
-		/* read doorbell */
-		reg=PCICON_GET_REG(PCICON_ACK_REG);
-		switch(reg) {
-			case PCIMSG_ALIVE:
-				PCI_CON_PRINTF(" Alive\n");
-				PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_ALIVE);
-				break;
-			case PCIMSG_CONN:
-				PCI_CON_PRINTF(" Conn %d",conn);
-				w_ptr = 0;
-				r_ptr = 0;
-				buff_full=0;
-				PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
-				conn=1;
-				PCI_CON_PRINTF(" ... %d\n",conn);
-				break;
-			case PCIMSG_CON_DATA:
-				data=PCICON_GET_REG(PCICON_RECEIVE_REG);
-				recbuf[w_ptr++]=(int)(data&0xff);
-				PCI_CON_PRINTF(" Data Console %lX, %X %d %d %X\n",data,((int)(data&0xFF)),
-					r_ptr,w_ptr,recbuf[w_ptr-1]);
-				if(w_ptr==REC_BUFFER_SIZE)
-					w_ptr=0;
-				if(w_ptr<r_ptr)
-					diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
-				else
-					diff=r_ptr-w_ptr;
-				if(diff>(REC_BUFFER_SIZE-4))
-					buff_full=1;
-				else
-					/* clear Mail box */
-					PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
-				break;
-			default:
-				serial_printf(" PCI9056_PCI_TO_LOC_DBELL = %08lX\n",reg);
-		}
-		/* clear IRQ */
-		PCICON_SET_REG(PCICON_ACK_REG,~0L);
-	}
-	return 0;
-}
-
-void pci_con_connect(void)
-{
-	unsigned long reg;
-	conn=0;
-	reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
-	/* default 0x0f010180 */
-	reg &= 0xff000000;
-	reg |= 0x00030000; /* enable local dorbell */
-	reg |= 0x00000300; /* enable PCI dorbell */
-	PCICON_SET_REG(PCI9056_INT_CTRL_STAT , reg);
-	irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
-	memset (&pci_con_dev, 0, sizeof (pci_con_dev));
-	strcpy (pci_con_dev.name, "pci_con");
-	pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
-	pci_con_dev.putc = pci_con_putc;
-	pci_con_dev.puts = pci_con_puts;
-	pci_con_dev.getc = pci_con_getc;
-	pci_con_dev.tstc = pci_con_tstc;
-	device_register (&pci_con_dev);
-	printf("PATI ready for PCI connection, type ctrl-c for exit\n");
-	do {
-		udelay(10);
-		if((volatile int)conn)
-			break;
-		if(ctrlc()) {
-			irq_free_handler(0x2);
-			return;
-		}
-	}while(1);
-	console_assign(stdin,"pci_con");
-	console_assign(stderr,"pci_con");
-	console_assign(stdout,"pci_con");
-}
-
-void pci_con_disc(void)
-{
-	console_assign(stdin,"serial");
-	console_assign(stderr,"serial");
-	console_assign(stdout,"serial");
-	PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_DISC);
-	/* reconnection */
-	irq_free_handler(0x02);
-	pci_con_connect();
-}
-#endif /* #ifdef CFG_PCI_CON_DEVICE */
-
-/*
- * Absolute environment address for linker file.
- */
-GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
deleted file mode 100644
index d5217724da..0000000000
--- a/board/mpl/pati/pati.h
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * (C) Copyright 2003
- * Denis Peter, d.peter@mpl.ch
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/************************************************************************
- * MACROS and register definitions for PATI Registers
- ************************************************************************/
-#ifndef __PATI_H_
-#define __PATI_H_	1
-
-#define PLD_PART_ID		0x0
-#define PLD_BOARD_TIMING	0x4
-#define PLD_CONF_REG1		0x8
-#define PLD_CONF_REG2		0xC
-#define PLD_CONF_RES		0x10
-
-#define SET_REG_BIT(y,x) (y<<(31-x))
-#define GET_REG_BIT(y,x) ((y>>(31-x)) & 0x1L)
-
-/* SDRAM Controller PLD_PART_ID */
-/* 9  10 11 12 13 14 19 31 */
-#define SDRAM_PART3	9
-#define SDRAM_PART2	10
-#define SDRAM_PART1	11
-#define SDRAM_PART0	12
-#define SDRAM_ID3	13
-#define SDRAM_ID2	14
-#define SDRAM_ID1	19
-#define SDRAM_ID0	31
-
-#define SDRAM_PART(x)	(	\
-	(GET_REG_BIT(x,SDRAM_PART3)<<3) |\
-	(GET_REG_BIT(x,SDRAM_PART2)<<2) |\
-	(GET_REG_BIT(x,SDRAM_PART1)<<1) |\
-	(GET_REG_BIT(x,SDRAM_PART0)))
-
-#define SDRAM_ID(x)	(	\
-	(GET_REG_BIT(x,SDRAM_ID3)<<3) |\
-	(GET_REG_BIT(x,SDRAM_ID2)<<2) |\
-	(GET_REG_BIT(x,SDRAM_ID1)<<1) |\
-	(GET_REG_BIT(x,SDRAM_ID0)))
-
-/* System Controller */
-/* 0  1 3 4 5 16 20 28 29 30 */
-#define SYSCNTR_PART4	0
-#define SYSCNTR_PART3	1
-#define SYSCNTR_PART2	3
-#define SYSCNTR_PART1	4
-#define SYSCNTR_PART0	5
-#define SYSCNTR_ID4	16
-#define SYSCNTR_ID3	20
-#define SYSCNTR_ID2	28
-#define SYSCNTR_ID1	29
-#define SYSCNTR_ID0	30
-
-#define SYSCNTR_PART(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_PART4)<<4) |\
-	(GET_REG_BIT(x,SYSCNTR_PART3)<<3) |\
-	(GET_REG_BIT(x,SYSCNTR_PART2)<<2) |\
-	(GET_REG_BIT(x,SYSCNTR_PART1)<<1) |\
-	(GET_REG_BIT(x,SYSCNTR_PART0)))
-
-#define SYSCNTR_ID(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_ID4)<<4) |\
-	(GET_REG_BIT(x,SYSCNTR_ID3)<<3) |\
-	(GET_REG_BIT(x,SYSCNTR_ID2)<<2) |\
-	(GET_REG_BIT(x,SYSCNTR_ID1)<<1) |\
-	(GET_REG_BIT(x,SYSCNTR_ID0)))
-
-/* SDRAM Controller PLD_BOARD_TIMING */
-/* 9  10 11 12 13 14 19 31 */
-#define SDRAM_CAL	9
-#define SDRAM_RCD	10
-#define SDRAM_WREQ	11
-#define SDRAM_PR 	12
-#define SDRAM_RC	13
-#define SDRAM_LMR	14
-#define SDRAM_IIP	19
-#define SDRAM_RES0	31
-/* System Controller */
-/* 0  1 3 4 5 16 20 28 29 30 */
-#define SYSCNTR_BREV0	0
-#define SYSCNTR_BREV1	1
-#define SYSCNTR_BREV2	3
-#define SYSCNTR_BREV3	4
-#define SYSCNTR_RES0	5
-#define SYSCNTR_RES1	16
-#define SYSCNTR_RES2	20
-#define SYSCNTR_FLWAIT2	28
-#define SYSCNTR_FLWAIT1	29
-#define SYSCNTR_FLWAIT0	30
-
-#define SYSCNTR_BREV(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_BREV3)<<3) |\
-	(GET_REG_BIT(x,SYSCNTR_BREV2)<<2) |\
-	(GET_REG_BIT(x,SYSCNTR_BREV1)<<1) |\
-	(GET_REG_BIT(x,SYSCNTR_BREV0)))
-
-#define GET_SYSCNTR_FLWAIT(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_FLWAIT2)<<2) |\
-	(GET_REG_BIT(x,SYSCNTR_FLWAIT1)<<1) |\
-	(GET_REG_BIT(x,SYSCNTR_FLWAIT0)))
-
-#define SET_SYSCNTR_FLWAIT(x)	(	\
-	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_FLWAIT2)) |\
-	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_FLWAIT1)) |\
-	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_FLWAIT0)))
-
-/* SDRAM Controller REG 2*/
-/* 9  10 11 12 13 14 19 31 */
-#define SDRAM_MUX0	9
-#define SDRAM_MUX1	10
-#define SDRAM_PDIS	11
-#define SDRAM_RES1 	12
-#define SDRAM_RES2	13
-#define SDRAM_RES3	14
-#define SDRAM_RES4	19
-#define SDRAM_RIP	31
-
-#define GET_SDRAM_MUX(x)	(	\
-	(GET_REG_BIT(x,SDRAM_MUX1)<<1)| \
-	(GET_REG_BIT(x,SDRAM_MUX0)))
-
-
-/* System Controller */
-/* 0  1 3 4 5 16 20 28 29 30 */
-#define SYSCNTR_FLAG	0
-#define SYSCNTR_IP	1
-#define SYSCNTR_BIND2	3
-#define SYSCNTR_BIND1	4
-#define SYSCNTR_BIND0	5
-#define SYSCNTR_PRM	16
-#define SYSCNTR_ICW	20
-#define SYSCNTR_ISB2	28
-#define SYSCNTR_ISB1	29
-#define SYSCNTR_ISB0	30
-
-#define GET_SYSCNTR_BOOTIND(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_BIND2)<<2) |\
-	(GET_REG_BIT(x,SYSCNTR_BIND1)<<1) |\
-	(GET_REG_BIT(x,SYSCNTR_BIND0)))
-
-#define SET_SYSCNTR_BOOTIND(x)	(	\
-	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_BIND2)) |\
-	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_BIND1))| \
-	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_BIND0)))
-
-#define GET_SYSCNTR_ISB(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_ISB2)<<2)| \
-	(GET_REG_BIT(x,SYSCNTR_ISB1)<<1)| \
-	(GET_REG_BIT(x,SYSCNTR_ISB0)))
-
-#define SET_SYSCNTR_ISB(x)	(	\
-	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_ISB2))| \
-	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_ISB))| \
-	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_ISB0)))
-
-/* SDRAM Controller REG 3*/
-/* 9  10 11 12 13 14 19 31 */
-#define SDRAM_RES5	9
-#define SDRAM_CFG1	10
-#define SDRAM_CFG2	11
-#define SDRAM_CFG3 	12
-#define SDRAM_RES6	13
-#define SDRAM_CFG5	14
-#define SDRAM_CFG6	19
-#define SDRAM_RES7	31
-
-#define GET_SDRAM_CFG(x)	(	\
-	(GET_REG_BIT(x,SDRAM_CFG6)<<4) |\
-	(GET_REG_BIT(x,SDRAM_CFG5)<<3) |\
-	(GET_REG_BIT(x,SDRAM_CFG3)<<2) |\
-	(GET_REG_BIT(x,SDRAM_CFG2)<<1) |\
-	(GET_REG_BIT(x,SDRAM_CFG1)))
-
-/* System Controller */
-/* 0  1 3 4 5 16 20 28 29 30 */
-#define SYSCNTR_BDIS	0
-#define SYSCNTR_PCIM	1
-#define SYSCNTR_CFG0	3
-#define SYSCNTR_CFG1	4
-#define SYSCNTR_CFG2	5
-#define SYSCNTR_CFG3	16
-#define SYSCNTR_BOOTEN	20
-#define SYSCNTR_CPU_VPP	28
-#define SYSCNTR_FL_VPP	29
-#define SYSCNTR_FL_WP	30
-
-#define GET_SYSCNTR_CFG(x)	(	\
-	(GET_REG_BIT(x,SYSCNTR_CFG3)<<3)| \
-	(GET_REG_BIT(x,SYSCNTR_CFG2)<<2)| \
-	(GET_REG_BIT(x,SYSCNTR_CFG1)<<1)| \
-	(GET_REG_BIT(x,SYSCNTR_CFG0)))
-
-
-/***************************************************************
- * MISC Defines
- ***************************************************************/
-
-#define PCI_VENDOR_ID_MPL 	0x18E6
-#define PCI_DEVICE_ID_PATI	0x00DA
-
-#if defined(CONFIG_MIP405)
-#define PATI_FIRMWARE_START_OFFSET	0x00300000
-#define PATI_ISO_STRING  "MEV-10084-001"
-#endif
-
-#define PATI_ENDIAN_MODE	0x3E
-
-/*******************************************
- * PATI Mapping:
- * -------------
- * PCI Map:
- * -------
- * All addreses are mapped into the memory area
- * (IO Area on some areas may also be possible)
- * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
- * - pci_space0_addr:  configurable
- * - pci_space1_addr	  configurable
- *
- * Local Map:
- * ----------
- * Local addresses (Remap)
- * - SDRAM      0x06000000 Size 16MByte mask 0xff000000
- * - EPLD CFG   0x07000000 Size 512Bytes
- * - FLASH      0x03000000 Size up to 8MByte
- * - CPU        0x01000000 Size 4MByte (only accessable if special configured)
- *
- * Implemention:
- * -------------
- * To prevent using large resources reservation on the host following
- * PCI mapping is choosed:
- * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
- * - pci_space0_addr:  configured to the EPLD Config Area size 256Bytes
- * - pci_space1_addr:  configured to the SDRAM Area size 1MBytes, this
- *                     space is used to switch between SDRAM, Flash and CPU
- *
- */
-
-/* Attribute definitions */
-#define PATI_BUS_SIZE_8		0
-#define PATI_BUS_SIZE_16	1
-#define PATI_BUS_SIZE_32	3
-
-#define PATI_SPACE0_MASK	(0xFEFFFE00)  /* Mask Attributes */
-#define PATI_SPACE1_MASK	(0x00000000)  /* Mask Attributes */
-
-#define PATI_EXTRA_LONG_EEPROM	1
-
-#define SPACE0_TA_ENABLE (1<<6)
-#define SPACE1_TA_ENABLE (1<<6)
-
-/* Config Area */
-#define PATI_LOC_CFG_ADDR		0x07000000		/* Local Address */
-#define PATI_LOC_CFG_MASK		0xFFFFFF00  		/* 256 Bytes */
-/* Attributes */
-#define PATI_LOC_CFG_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
-#define PATI_LOC_CFG_BURST		0  			/* No Burst */
-#define PATI_LOC_CFG_NO_PREFETCH	1  			/* No Prefetch */
-#define PATI_LOC_CFG_TA_ENABLE		1 			/* Enable TA */
-
-#define PATI_LOC_CFG_SPACE0_ATTR  ( \
-		PATI_LOC_CFG_BUS_SIZE | \
-		(PATI_LOC_CFG_TA_ENABLE << 6) | \
-		(PATI_LOC_CFG_NO_PREFETCH << 8) | \
-		(PATI_LOC_CFG_BURST << 24) | \
-		(PATI_EXTRA_LONG_EEPROM << 25))
-
-/* should never be used */
-#define PATI_LOC_CFG_SPACE1_ATTR  ( \
-		PATI_LOC_CFG_BUS_SIZE | \
-		(PATI_LOC_CFG_TA_ENABLE << 6) | \
-		(PATI_LOC_CFG_NO_PREFETCH << 9) | \
-		(PATI_LOC_CFG_BURST << 8))
-
-
-/* SDRAM Area */
-#define PATI_LOC_SDRAM_ADDR		0x06000000		/* Local Address */
-#define PATI_LOC_SDRAM_MASK		0xFFF00000		/* 1MByte */
-/* Attributes */
-#define PATI_LOC_SDRAM_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
-#define PATI_LOC_SDRAM_BURST		0  			/* No Burst */
-#define PATI_LOC_SDRAM_NO_PREFETCH	0  			/* Prefetch */
-#define PATI_LOC_SDRAM_TA_ENABLE	1  			/* Enable TA */
-
-/* should never be used */
-#define PATI_LOC_SDRAM_SPACE0_ATTR  ( \
-		PATI_LOC_SDRAM_BUS_SIZE | \
-		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
-		(PATI_LOC_SDRAM_NO_PREFETCH << 8) | \
-		(PATI_LOC_SDRAM_BURST << 24) | \
-		(PATI_EXTRA_LONG_EEPROM << 25))
-
-#define PATI_LOC_SDRAM_SPACE1_ATTR  ( \
-		PATI_LOC_SDRAM_BUS_SIZE | \
-		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
-		(PATI_LOC_SDRAM_NO_PREFETCH << 9) | \
-		(PATI_LOC_SDRAM_BURST << 8))
-
-
-/* Flash Area */
-#define PATI_LOC_FLASH_ADDR		0x03000000		/* Local Address */
-#define PATI_LOC_FLASH_MASK		0xFFF00000		/* 1MByte */
-/* Attributes */
-#define PATI_LOC_FLASH_BUS_SIZE		PATI_BUS_SIZE_16  	/* 16 Bit */
-#define PATI_LOC_FLASH_BURST		0  			/* No Burst */
-#define PATI_LOC_FLASH_NO_PREFETCH	1  			/* No Prefetch */
-#define PATI_LOC_FLASH_TA_ENABLE	1  			/* Enable TA */
-
-/* should never be used */
-#define PATI_LOC_FLASH_SPACE0_ATTR  ( \
-		PATI_LOC_FLASH_BUS_SIZE | \
-		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
-		(PATI_LOC_FLASH_NO_PREFETCH << 8) | \
-		(PATI_LOC_FLASH_BURST << 24) | \
-		(PATI_EXTRA_LONG_EEPROM << 25))
-
-#define PATI_LOC_FLASH_SPACE1_ATTR  ( \
-		PATI_LOC_FLASH_BUS_SIZE | \
-		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
-		(PATI_LOC_FLASH_NO_PREFETCH << 9) | \
-		(PATI_LOC_FLASH_BURST << 8))
-
-
-/* CPU Area */
-#define PATI_LOC_CPU_ADDR		0x01000000		/* Local Address */
-#define PATI_LOC_CPU_MASK		0xFFF00000		/* 1Mbyte */
-/* Attributes */
-#define PATI_LOC_CPU_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
-#define PATI_LOC_CPU_BURST		0			/* No Burst */
-#define PATI_LOC_CPU_NO_PREFETCH	1			/* No Prefetch */
-#define PATI_LOC_CPU_TA_ENABLE		1			/* Enable TA */
-
-/* should never be used */
-#define PATI_LOC_CPU_SPACE0_ATTR  ( \
-		PATI_LOC_CPU_BUS_SIZE | \
-		(PATI_LOC_CPU_TA_ENABLE << 6) | \
-		(PATI_LOC_CPU_NO_PREFETCH << 8) | \
-		(PATI_LOC_CPU_BURST << 24) | \
-		(PATI_EXTRA_CPU_EEPROM << 25))
-
-#define PATI_LOC_CPU_SPACE1_ATTR  ( \
-		PATI_LOC_CPU_BUS_SIZE | \
-		(PATI_LOC_CPU_TA_ENABLE << 6) | \
-		(PATI_LOC_CPU_NO_PREFETCH << 9) | \
-		(PATI_LOC_CPU_BURST << 8))
-
-/***************************************************
- * Hardware Config word definition
- ***************************************************/
-#define BOOT_EXT_FLASH		0x00000000
-#define BOOT_INT_FLASH		0x00000004
-#define BOOT_FROM_PCI		0x00000006
-#define BOOT_FROM_SDRAM		0x00000005
-
-#define ENABLE_INT_ARB		0x00000008
-
-#define INITIAL_IRQ_PREF	0x00000010
-
-#define INITIAL_MEM_0M		0x00000000
-#define INITIAL_MEM_4M		0x00000080
-#define INITIAL_MEM_8M		0x00000040
-#define INITIAL_MEM_12M		0x000000C0
-#define INITIAL_MEM_16M		0x00000020
-#define INITIAL_MEM_20M		0x000000A0
-#define INITIAL_MEM_24M		0x00000060
-#define INITIAL_MEM_28M		0x000000E0
-/* CONF */
-#define INTERNAL_HWCONF		0x00000100
-/* PRPM */
-#define LOCAL_CPU_SLAVE		0x00000200
-/* BDIS */
-#define DISABLE_MEM_CNTR	0x00000400
-/* PCIM */
-#define PCI_MASTER_ONLY		0x00000800
-
-
-#define PATI_HW_START		((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF))
-#define PATI_HW_PCI_ONLY 	((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
-#define PATI_HW_CPU_ACC		((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
-#define PATI_HW_CPU_SLAVE 	((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
-
-/***************************************************
- * Direct Master Config
- ***************************************************/
-#define PATI_DMASTER_PCI_ADDR		0x01000000
-#define PATI_BUS_MASTER 1
-
-
-#define PATI_DMASTER_MASK 		0xFFF00000  /* 1MByte */
-#define PATI_DMASTER_ADDR 		0x01000000  /* Local Address */
-
-#define PATI_DMASTER_MEMORY_EN 		0x00000001 /* 0x00000001 */
-#define PATI_DMASTER_READ_AHEAD 	0x00000004 /* 0x00000004 */
-#define PATI_DMASTER_READ_NOT_AHEAD 	0x00000000 /* 0x00000004 */
-#define PATI_DMASTER_PRE_SIZE_CNTRL_0	0x00000000
-#define PATI_DMASTER_PRE_SIZE_CNTRL_4	0x00000008
-#define PATI_DMASTER_PRE_SIZE_CNTRL_8	0x00001000
-#define PATI_DMASTER_PRE_SIZE_CNTRL_16	0x00001008
-#define PATI_DMASTER_REL_PCI		0x00000000
-#define PATI_DMASTER_NOT_REL_PCI	0x00000010
-#define PATI_DMASTER_WR_INVAL		0x00000200
-#define PATI_DMASTER_NOT_WR_INVAL	0x00000000
-#define PATI_DMASTER_PRE_LIMIT		0x00000800
-#define PATI_DMASTER_PRE_CONT		0x00000000
-#define PATI_DMASTER_DELAY_WR_0		0x00000000
-#define PATI_DMASTER_DELAY_WR_4		0x00004000
-#define PATI_DMASTER_DELAY_WR_8		0x00008000
-#define PATI_DMASTER_DELAY_WR_16	0x0000C000
-
-#define PATI_DMASTER_PCI_ADDR_MASK	0xFFFF0000
-
-#define PATI_DMASTER_ATTR	\
-	PATI_DMASTER_MEMORY_EN | \
-	PATI_DMASTER_READ_AHEAD | \
-	PATI_DMASTER_PRE_SIZE_CNTRL_4 | \
-	PATI_DMASTER_REL_PCI | \
-	PATI_DMASTER_NOT_WR_INVAL | \
-	PATI_DMASTER_PRE_LIMIT | \
-	PATI_DMASTER_DELAY_WR_0
-
-
-#endif /* #ifndef __PATI_H_ */
diff --git a/board/mpl/pati/pci_eeprom.h b/board/mpl/pati/pci_eeprom.h
deleted file mode 100644
index 96588089ea..0000000000
--- a/board/mpl/pati/pci_eeprom.h
+++ /dev/null
@@ -1,91 +0,0 @@
-
-#ifndef __PCI_EEPROM_H_
-#define __PCI_EEPROM_H_	1
-
-#include "pati.h"
-/******************************************************************************
- * Eeprom Support
- ******************************************************************************/
-/**********************************************
-*               Definitions
-**********************************************/
-#define EE46_CMD_LEN    9       /* Bits in instructions */
-#define EE56_CMD_LEN    11      /* Bits in instructions */
-#define EE66_CMD_LEN    11      /* Bits in instructions */
-#define EE_READ         0x0180  /* 01 1000 0000 read instruction */
-#define EE_WRITE        0x0140  /* 01 0100 0000 write instruction */
-#define EE_WREN         0x0130  /* 01 0011 0000 write enable instruction */
-#define EE_WRALL        0x0110  /* 01 0001 0000 write all registers */
-#define EE_PRREAD       0x0180  /* 01 1000 0000 read address stored in Protect Register */
-#define EE_PRWRITE      0x0140  /* 01 0100 0000 write the address into PR */
-#define EE_WDS          0x0100  /* 01 0000 0000 write disable instruction */
-#define EE_PREN         0x0130  /* 01 0011 0000 protect enable instruction */
-#define EE_PRCLEAR      0x01FF  /* 01 1111 1111 clear protect register instr */
-#define EE_PRDS         0x0100  /* 01 0000 0000 ONE TIME ONLY, permenant */
-
-/***************************************************
- * EEPROM
- ***************************************************/
-#define LOW_WORD(x)	(((x) & 0xFFFF))
-#define HIGH_WORD(x)	(((x) >> 16) & 0xFFFF)
-
-typedef struct pci_eeprom_t {
-	unsigned short offset;
-	unsigned short value;
-} pci_eeprom;
-
-static pci_eeprom pati_eeprom[] = {
-	{ 0x00,PCI_DEVICE_ID_PATI }, 	/* PCI Device ID PCIIDR[31:16] */
-	{ 0x02,PCI_VENDOR_ID_MPL }, 	/* PCI Vendor ID PCIIDR[15:0] */
-	{ 0x04,PCI_CLASS_PROCESSOR_POWERPC }, 	/* PCI Class Code PCICCR[23:8] */
-	{ 0x06,0x00BA }, 	/* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
-	{ 0x08,0x0007 }, 	/* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
-	{ 0x0A,0x0100 }, 	/* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
-	{ 0x0C,0x0000 }, 	/* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
-	{ 0x0E,0x0000 }, 	/* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
-	{ 0x10,0x0000 }, 	/* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
-	{ 0x12,0x0000 }, 	/* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
-	{ 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) }, 	/* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
-	{ 0x16,LOW_WORD(PATI_LOC_CFG_MASK) }, 	/* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
-	{ 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) }, 	/* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
-	{ 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, 	/* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
-	{ 0x1C,0x0000 }, 	/* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
-	{ 0x1E,0x0000 }, 	/* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
-	{ 0x20,0x0030 }, 	/* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
-	{ 0x22,0x0510 }, 	/* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
-	{ 0x24,0x0000 }, 	/* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
-	{ 0x26,0x0000 }, 	/* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1]  */
-	{ 0x28,0x0000 }, 	/* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
-	{ 0x2A,0x0000 }, 	/* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
-	{ 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) }, 	/* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
-	{ 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) }, 	/* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
-	{ 0x30,HIGH_WORD(PATI_DMASTER_MASK) }, 	/* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
-	{ 0x32,LOW_WORD(PATI_DMASTER_MASK) }, 	/* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
-	{ 0x34,HIGH_WORD(PATI_DMASTER_ADDR) }, 	/* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
-	{ 0x36,LOW_WORD(PATI_DMASTER_ADDR) }, 	/* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
-	{ 0x38,0x0000 }, 	/* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
-	{ 0x3A,0x0000 }, 	/* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
-	{ 0x3C,0x0000 }, 	/* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
-	{ 0x3E,0x0000 }, 	/* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
-	{ 0x40,0x0000 }, 	/* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
-	{ 0x42,0x0000 }, 	/* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
-	{ 0x44,0x0000 }, 	/* PCI Subsystem ID PCISID[15:0] */
-	{ 0x46,0x0000 }, 	/* PCI Subsystem Vendor ID PCISVID[15:0] */
-	{ 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) }, 	/* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
-	{ 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, 	/* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
-	{ 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) }, 	/* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
-	{ 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 }, 	/* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
-	{ 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, 	/* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
-	{ 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, 	/* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
-	{ 0x54,0x0000 }, 	/* Hot Swap Control/Status (Reserved) Reserved */
-	{ 0x56,0x0000 }, 	/* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
-	{ 0x58,0x0000 }, 	/* Reserved Reserved */
-	{ 0x5A,0x0000 }, 	/* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
-	{ 0x5C,0x0000 }, 	/* Power Management Capabilities PMC[15:9, 2:0] */
-	{ 0x5E,0x0000 }, 	/* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
-	{ 0x60,0x0000 }, 	/* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
-	{ 0x62,0x0000 }, 	/* Power Management Control/Status PMCSR[14:8] */
-	{ 0xFFFF,0xFFFF} 	/* terminaror */
-};
-#define PATI_EEPROM_LAST_OFFSET	0x64
-#endif /* #ifndef __PCI_EEPROM_H_ */
diff --git a/board/mpl/pati/plx9056.h b/board/mpl/pati/plx9056.h
deleted file mode 100644
index cd4df18eba..0000000000
--- a/board/mpl/pati/plx9056.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * (C) Copyright 2003
- * Denis Peter, d.peter@mpl.ch
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/* PLX9096 register definitions
-*/
-#ifndef __PLX9056_H_
-#define __PLX9056_H_	1
-
-#include <pci.h>
-
-#ifdef PLX9056_LOC
-#define LOCAL_OFFSET					0x080
-/* PCI Config regs */
-#else
-#define LOCAL_OFFSET					0x000
-#endif
-
-#define PCI9056_VENDOR_ID            PCI_VENDOR_ID
-/*#define PCI9656_DEVICE_ID            PCI_DEVICE_ID */
-#define PCI9056_COMMAND              PCI_COMMAND
-/*#define PCI9656_STATUS               PCI_STATUS */
-#define PCI9056_REVISION             PCI_REVISION_ID
-
-#define PCI9056_CACHE_SIZE           PCI_CACHE_LINE_SIZE
-#define PCI9056_RTR_BASE             PCI_BASE_ADDRESS_0
-#define PCI9056_RTR_IO_BASE          PCI_BASE_ADDRESS_1
-#define PCI9056_LOCAL_BASE0          PCI_BASE_ADDRESS_2
-#define PCI9056_LOCAL_BASE1          PCI_BASE_ADDRESS_3
-#define PCI9056_UNUSED_BASE1         PCI_BASE_ADDRESS_4
-#define PCI9056_UNUSED_BASE2         PCI_BASE_ADDRESS_5
-#define PCI9056_CIS_PTR              PCI_CARDBUS_CIS
-#define PCI9056_SUB_ID               PCI_SUBSYSTEM_VENDOR_ID
-#define PCI9056_EXP_ROM_BASE         PCI_ROM_ADDRESS
-#define PCI9056_CAP_PTR              PCI_CAPABILITY_LIST
-#define PCI9056_INT_LINE             PCI_INTERRUPT_LINE
-
-#if defined(PLX9056_LOC)
-    #define PCI9056_PM_CAP_ID            0x180
-    #define PCI9056_PM_CSR               0x184
-    #define PCI9056_HS_CAP_ID            0x188
-    #define PCI9056_VPD_CAP_ID           0x18C
-    #define PCI9056_VPD_DATA             0x190
-#endif
-
-
-#define PCI_DEVICE_ID_PLX9056		0x9056
-
-/* Local Configuration Registers Accessible via the PCI Base address + Variable */
-#define PCI9056_SPACE0_RANGE         (0x000 + LOCAL_OFFSET)
-#define PCI9056_SPACE0_REMAP         (0x004 + LOCAL_OFFSET)
-#define PCI9056_LOCAL_DMA_ARBIT      (0x008 + LOCAL_OFFSET)
-#define PCI9056_ENDIAN_DESC          (0x00c + LOCAL_OFFSET)
-#define PCI9056_EXP_ROM_RANGE        (0x010 + LOCAL_OFFSET)
-#define PCI9056_EXP_ROM_REMAP        (0x014 + LOCAL_OFFSET)
-#define PCI9056_SPACE0_ROM_DESC      (0x018 + LOCAL_OFFSET)
-#define PCI9056_DM_RANGE             (0x01c + LOCAL_OFFSET)
-#define PCI9056_DM_MEM_BASE          (0x020 + LOCAL_OFFSET)
-#define PCI9056_DM_IO_BASE           (0x024 + LOCAL_OFFSET)
-#define PCI9056_DM_PCI_MEM_REMAP     (0x028 + LOCAL_OFFSET)
-#define PCI9056_DM_PCI_IO_CONFIG     (0x02c + LOCAL_OFFSET)
-#define PCI9056_SPACE1_RANGE         (0x0f0 + LOCAL_OFFSET)
-#define PCI9056_SPACE1_REMAP         (0x0f4 + LOCAL_OFFSET)
-#define PCI9056_SPACE1_DESC          (0x0f8 + LOCAL_OFFSET)
-#define PCI9056_DM_DAC               (0x0fc + LOCAL_OFFSET)
-
-#ifdef PLX9056_LOC
-#define PCI9056_ARBITER_CTRL         0x1A0
-#define PCI9056_ABORT_ADDRESS        0x1A4
-#endif
-
-/* Runtime registers  PCI Address + LOCAL_OFFSET */
-#ifdef PLX9056_LOC
-#define PCI9056_MAILBOX0				0x0C0
-#define PCI9056_MAILBOX1				0x0C4
-#else
-#define PCI9056_MAILBOX0				0x078
-#define PCI9056_MAILBOX1				0x07c
-#endif
-
-#define PCI9056_MAILBOX2				(0x048 + LOCAL_OFFSET)
-#define PCI9056_MAILBOX3				(0x04c + LOCAL_OFFSET)
-#define PCI9056_MAILBOX4				(0x050 + LOCAL_OFFSET)
-#define PCI9056_MAILBOX5				(0x054 + LOCAL_OFFSET)
-#define PCI9056_MAILBOX6				(0x058 + LOCAL_OFFSET)
-#define PCI9056_MAILBOX7				(0x05c + LOCAL_OFFSET)
-#define PCI9056_PCI_TO_LOC_DBELL		(0x060 + LOCAL_OFFSET)
-#define PCI9056_LOC_TO_PCI_DBELL		(0x064 + LOCAL_OFFSET)
-#define PCI9056_INT_CTRL_STAT			(0x068 + LOCAL_OFFSET)
-#define PCI9056_EEPROM_CTRL_STAT		(0x06c + LOCAL_OFFSET)
-#define PCI9056_PERM_VENDOR_ID		(0x070 + LOCAL_OFFSET)
-#define PCI9056_REVISION_ID			(0x074 + LOCAL_OFFSET)
-
-#endif /* #ifndef __PLX9056_H_ */
diff --git a/board/mpl/pati/u-boot.lds b/board/mpl/pati/u-boot.lds
deleted file mode 100644
index 5b03fef66c..0000000000
--- a/board/mpl/pati/u-boot.lds
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2001	Wolfgang Denk, DENX Software Engineering, wd@denx.de
- * (C) Copyright 2003	Martin Winistoerfer, martinwinistoerfer@gmx.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc5xx/start.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  _end = . ;
-  PROVIDE (end = .);
-/*   . = env_start;
-	.ppcenv	:
-	{
-		common/environment.o (.ppcenv)
-	}
-*/
-}
diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile
deleted file mode 100644
index 72143f0911..0000000000
--- a/board/mpl/pip405/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o \
-	  ../common/flash.o cmd_pip405.o ../common/pci.o \
-	  ../common/isa.o ../common/kbd.o \
-	  ../common/usb_uhci.o \
-	  ../common/memtst.o ../common/common_util.o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
deleted file mode 100644
index 1bf4d7bd87..0000000000
--- a/board/mpl/pip405/cmd_pip405.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * hacked for PIP405
- */
-
-#include <common.h>
-#include <command.h>
-#include "pip405.h"
-#include "../common/common_util.h"
-
-
-extern void print_pip405_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-
- 	ulong led_on,led_nr;
-
-	if (strcmp(argv[1], "info") == 0)
-	{
-		print_pip405_info();
-	 	return 0;
-   	}
- 	if (strcmp(argv[1], "led") == 0)
-	{
-		led_nr = (ulong)simple_strtoul(argv[2], NULL, 10);
-		led_on = (ulong)simple_strtoul(argv[3], NULL, 10);
-		if(!led_nr)
-			user_led0(led_on);
-		else
-			user_led1(led_on);
-		return 0;
-   	}
-
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-U_BOOT_CMD(
-	pip405,	6,	1,	do_pip405,
-	"pip405  - PIP405 specific Cmds\n",
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
-	"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
-	"pip405 flash mps - updates U-Boot with image from MPS\n"
-);
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pip405/config.mk b/board/mpl/pip405/config.mk
deleted file mode 100644
index 0f8d153d8e..0000000000
--- a/board/mpl/pip405/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S
deleted file mode 100644
index 39f2ea534a..0000000000
--- a/board/mpl/pip405/init.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*------------------------------------------------------------------------------+
- *
- *      This source code has been made available to you by IBM on an AS-IS
- *      basis.  Anyone receiving this source is licensed under IBM
- *      copyrights to use it in any way he or she deems fit, including
- *      copying it, modifying it, compiling it, and redistributing it either
- *      with or without modifications.  No license under IBM patents or
- *      patent applications is to be implied by the copyright license.
- *
- *      Any user of this software should understand that IBM cannot provide
- *      technical support for this software and will not be responsible for
- *      any consequences resulting from the use of this software.
- *
- *      Any person who transfers this source code or any derivative work
- *      must include the IBM copyright notice, this paragraph, and the
- *      preceding two paragraphs in the transferred software.
- *
- *      COPYRIGHT   I B M   CORPORATION 1995
- *      LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------------
- * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external
- *		peripherals. IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *	Bank 0 - Flash or Multi Purpose Socket
- *	Bank 1 - Multi Purpose Socket or Flash
- *	Bank 2 - not used
- *	Bank 3 - not used
- *	Bank 4 - not used
- *	Bank 5 - not used
- *	Bank 6 - used to switch on the 12V for the Multipurpose socket
- *	Bank 7 - Config Register
- *-----------------------------------------------------------------------------*/
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <configs/PIP405.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include "pip405.h"
-
-  .globl ext_bus_cntlr_init
- ext_bus_cntlr_init:
-  mflr   r4                      /* save link register */
-  mfdcr  r3,strap                /* get strapping reg */
-  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
-  bnelr                          /* jump back if PCI boot */
-
-  bl      ..getAddr
-..getAddr:
-  mflr    r3                      /* get address of ..getAddr */
-  mtlr    r4                      /* restore link register */
-  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
-  mtctr   r4                      /* 14 cache lines to fit this function */
-				   /* in cache (gives us 8x14=112 instrctns) */
-..ebcloop:
-  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-  addi    r3,r3,32								/* move to next cache line */
-  bdnz    ..ebcloop               /* continue for 14 cache lines */
-
-   /*-------------------------------------------------------------------
-    * Delay to ensure all accesses to ROM are complete before changing
-    * bank 0 timings.
-    *------------------------------------------------------------------- */
-	addis	r3,0,0x0
-  ori     r3,r3,0xA000
-  mtctr   r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-
-	/*-----------------------------------------------------------------------
-	 * decide boot up mode
-	 *----------------------------------------------------------------------- */
-	addi		r4,0,pb0cr
-	mtdcr		ebccfga,r4
-	mfdcr		r4,ebccfgd
-
-	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq		0f				/* jump if 8 bit bus width */
-
-	/* setup 16 bit things
-   *-----------------------------------------------------------------------
-   * Memory Bank 0 (16 Bit Flash) initialization
-   *---------------------------------------------------------------------- */
-
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,(FLASH_AP_B)@h
-	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(FLASH_CR_B)@h
-	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   ebccfgd,r4
-	b				1f
-
-0:
-	/* 8Bit boot mode: */
-	/*-----------------------------------------------------------------------
-	* Memory Bank 0 Multi Purpose Socket initialization
-	*----------------------------------------------------------------------- */
-	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,(MPS_AP_B)@h
-	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(MPS_CR_B)@h
-	ori     r4,r4,(MPS_CR_B)@l
-	mtdcr   ebccfgd,r4
-
-
-1:
-  /*-----------------------------------------------------------------------
-   * Memory Bank 2-3-4-5-6 (not used) initialization
-   *-----------------------------------------------------------------------*/
-  addi    r4,0,pb1cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb2cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb3cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb4cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb5cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb6cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-
-  addi    r4,0,pb7cr
-  mtdcr   ebccfga,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
-  nop				/* pass2 DCR errata #8 */
-  blr
-
-/*-----------------------------------------------------------------------------
- * Function:     sdram_init
- * Description:  Configures the internal SRAM memory. and setup the
- *               Stackpointer in it.
- *----------------------------------------------------------------------------- */
-	.globl  sdram_init
-
-sdram_init:
-
-
-  blr
-
-
-#if defined(CONFIG_BOOT_PCI)
-    .section .bootpg,"ax"
-    .globl _start_pci
-/*******************************************
- */
-
-_start_pci:
-  /* first handle errata #68 / PCI_18 */
-  iccci   r0, r0          /* invalidate I-cache */
-  lis     r31, 0
-  mticcr  r31             /* ICCR = 0 (all uncachable) */
-  isync
-
-  mfccr0  r28             /* set CCR0[24] = 1 */
-  ori     r28, r28, 0x0080
-  mtccr0  r28
-
-  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
-  lis     r28, 0xEF40
-  addi    r28, r28, 0x0004
-  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
-  lis     r29, 0xFFF8     /* open 512 kByte */
-  addi    r29, r29, 0x0001/* and enable this region */
-  stwbrx  r29, r0, r28    /* write PMM0MA */
-
-  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
-  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
-
-  lis     r31, 0x8000     /* set en bit bus 0 */
-  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
-  stwbrx  r31, r0, r28    /* write it */
-
-  lwbrx   r31, r0, r29    /* load XBCS register */
-  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
-  stwbrx  r31, r0, r29    /* write back XBCS register */
-
-  nop
-  nop
-  b	_start		/* normal start */
-#endif
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
deleted file mode 100644
index 38286081ae..0000000000
--- a/board/mpl/pip405/pip405.c
+++ /dev/null
@@ -1,954 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * TODO: clean-up
- */
-
-#include <common.h>
-#include "pip405.h"
-#include <asm/processor.h>
-#include <i2c.h>
-#include "../common/isa.h"
-#include "../common/common_util.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef SDRAM_DEBUG
-
-#define FALSE           0
-#define TRUE            1
-
-/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
-#ifndef __ldiv_t_defined
-typedef struct {
-	long int quot;		/* Quotient */
-	long int rem;		/* Remainder    */
-} ldiv_t;
-extern ldiv_t ldiv (long int __numer, long int __denom);
-
-# define __ldiv_t_defined	1
-#endif
-
-
-typedef enum {
-	SDRAM_NO_ERR,
-	SDRAM_SPD_COMM_ERR,
-	SDRAM_SPD_CHKSUM_ERR,
-	SDRAM_UNSUPPORTED_ERR,
-	SDRAM_UNKNOWN_ERR
-} SDRAM_ERR;
-
-typedef struct {
-	const unsigned char mode;
-	const unsigned char row;
-	const unsigned char col;
-	const unsigned char bank;
-} SDRAM_SETUP;
-
-static const SDRAM_SETUP sdram_setup_table[] = {
-	{1, 11, 9, 2},
-	{1, 11, 10, 2},
-	{2, 12, 9, 4},
-	{2, 12, 10, 4},
-	{3, 13, 9, 4},
-	{3, 13, 10, 4},
-	{3, 13, 11, 4},
-	{4, 12, 8, 2},
-	{4, 12, 8, 4},
-	{5, 11, 8, 2},
-	{5, 11, 8, 4},
-	{6, 13, 8, 2},
-	{6, 13, 8, 4},
-	{7, 13, 9, 2},
-	{7, 13, 10, 2},
-	{0, 0, 0, 0}
-};
-
-static const unsigned char cal_indextable[] = {
-	9, 23, 25
-};
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns.ns/4 coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version)
-{
-	unsigned short ns, ns4;
-
-	/* isolate upper 6 bits */
-	ns = (spd_byte >> 2) & 0x3F;
-	/* isloate lower 2 bits */
-	ns4 = (spd_byte & 0x03);
-
-	return (ns * 100 + ns4 * 25);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NSto10PS (unsigned char spd_byte)
-{
-	return (spd_byte * 100);
-}
-
-void SDRAM_err (const char *s)
-{
-#ifndef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-#endif
-	serial_puts ("\n");
-	serial_puts (s);
-	serial_puts ("\n enable SDRAM_DEBUG for more info\n");
-	for (;;);
-}
-
-
-#ifdef SDRAM_DEBUG
-
-void write_hex (unsigned char i)
-{
-	char cc;
-
-	cc = i >> 4;
-	cc &= 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-	cc = i & 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-}
-
-void write_4hex (unsigned long val)
-{
-	write_hex ((unsigned char) (val >> 24));
-	write_hex ((unsigned char) (val >> 16));
-	write_hex ((unsigned char) (val >> 8));
-	write_hex ((unsigned char) val);
-}
-
-#endif
-
-int board_early_init_f (void)
-{
-	unsigned char dataout[1];
-	unsigned char datain[128];
-	unsigned long sdram_size = 0;
-	SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table;
-	unsigned long memclk;
-	unsigned long tmemclk = 0;
-	unsigned long tmp, bank, baseaddr, bank_size;
-	unsigned short i;
-	unsigned char rows, cols, banks, sdram_banks, density;
-	unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks,
-			trc_clocks, tctp_clocks;
-	unsigned char cal_index, cal_val, spd_version, spd_chksum;
-	unsigned char buf[8];
-	/* set up the config port */
-	mtdcr (ebccfga, pb7ap);
-	mtdcr (ebccfgd, CONFIG_PORT_AP);
-	mtdcr (ebccfga, pb7cr);
-	mtdcr (ebccfgd, CONFIG_PORT_CR);
-
-	memclk = get_bus_freq (tmemclk);
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-#ifdef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-	serial_puts ("\nstart SDRAM Setup\n");
-#endif
-
-	/* Read Serial Presence Detect Information */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	dataout[0] = 0;
-	for (i = 0; i < 128; i++)
-		datain[i] = 127;
-	i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128);
-#ifdef SDRAM_DEBUG
-	serial_puts ("\ni2c_read returns ");
-	write_hex (i);
-	serial_puts ("\n");
-#endif
-
-#ifdef SDRAM_DEBUG
-	for (i = 0; i < 128; i++) {
-		write_hex (datain[i]);
-		serial_puts (" ");
-		if (((i + 1) % 16) == 0)
-			serial_puts ("\n");
-	}
-	serial_puts ("\n");
-#endif
-	spd_chksum = 0;
-	for (i = 0; i < 63; i++) {
-		spd_chksum += datain[i];
-	}							/* endfor */
-	if (datain[63] != spd_chksum) {
-#ifdef SDRAM_DEBUG
-		serial_puts ("SPD chksum: 0x");
-		write_hex (datain[63]);
-		serial_puts (" != calc. chksum: 0x");
-		write_hex (spd_chksum);
-		serial_puts ("\n");
-#endif
-		SDRAM_err ("SPD checksum Error");
-	}
-	/* SPD seems to be ok, use it */
-
-	/* get SPD version */
-	spd_version = datain[62];
-
-	/* do some sanity checks on the kind of RAM */
-	if ((datain[0] < 0x80) ||	/* less than 128 valid bytes in SPD */
-		(datain[2] != 0x04) ||	/* if not SDRAM */
-		(!((datain[6] == 0x40) || (datain[6] == 0x48))) ||	/* or not (64 Bit or 72 Bit)  */
-		(datain[7] != 0x00) || (datain[8] != 0x01) ||	/* or not LVTTL signal levels */
-		(datain[126] == 0x66))	/* or a 66Mhz modules */
-		SDRAM_err ("unsupported SDRAM");
-#ifdef SDRAM_DEBUG
-	serial_puts ("SDRAM sanity ok\n");
-#endif
-
-	/* get number of rows/cols/banks out of byte 3+4+5 */
-	rows = datain[3];
-	cols = datain[4];
-	banks = datain[5];
-
-	/* get number of SDRAM banks out of byte 17 and
-	   supported CAS latencies out of byte 18 */
-	sdram_banks = datain[17];
-	supported_cal = datain[18] & ~0x81;
-
-	while (t->mode != 0) {
-		if ((t->row == rows) && (t->col == cols)
-			&& (t->bank == sdram_banks))
-			break;
-		t++;
-	}							/* endwhile */
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("rows: ");
-	write_hex (rows);
-	serial_puts (" cols: ");
-	write_hex (cols);
-	serial_puts (" banks: ");
-	write_hex (banks);
-	serial_puts (" mode: ");
-	write_hex (t->mode);
-	serial_puts ("\n");
-#endif
-	if (t->mode == 0)
-		SDRAM_err ("unsupported SDRAM");
-	/* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */
-#ifdef SDRAM_DEBUG
-	serial_puts ("tRP: ");
-	write_hex (datain[27]);
-	serial_puts ("\ntRCD: ");
-	write_hex (datain[29]);
-	serial_puts ("\ntRAS: ");
-	write_hex (datain[30]);
-	serial_puts ("\n");
-#endif
-
-	trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk;
-	trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk;
-	tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk;
-	density = datain[31];
-
-	/* trc_clocks is sum of trp_clocks + tras_clocks */
-	trc_clocks = trp_clocks + tras_clocks;
-	/* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
-	tctp_clocks =
-			((NSto10PS (datain[30]) - NSto10PS (datain[29])) +
-			 (tmemclk - 1)) / tmemclk;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("c_RP: ");
-	write_hex (trp_clocks);
-	serial_puts ("\nc_RCD: ");
-	write_hex (trcd_clocks);
-	serial_puts ("\nc_RAS: ");
-	write_hex (tras_clocks);
-	serial_puts ("\nc_RC: (RP+RAS): ");
-	write_hex (trc_clocks);
-	serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): ");
-	write_hex (tctp_clocks);
-	serial_puts ("\nt_CTP: RAS - RCD: ");
-	write_hex ((unsigned
-				char) ((NSto10PS (datain[30]) -
-						NSto10PS (datain[29])) >> 8));
-	write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29])));
-	serial_puts ("\ntmemclk: ");
-	write_hex ((unsigned char) (tmemclk >> 8));
-	write_hex ((unsigned char) (tmemclk));
-	serial_puts ("\n");
-#endif
-
-
-	cal_val = 255;
-	for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) {
-		/* is this CAS latency supported ? */
-		if ((supported_cal >> i) & 0x01) {
-			buf[0] = datain[cal_indextable[cal_index]];
-			if (cal_index < 2) {
-				if (NS10to10PS (buf[0], spd_version) <= tmemclk)
-					cal_val = i;
-			} else {
-				/* SPD bytes 25+26 have another format */
-				if (NS4to10PS (buf[0], spd_version) <= tmemclk)
-					cal_val = i;
-			}	/* endif */
-			cal_index++;
-		}	/* endif */
-	}	/* endfor */
-#ifdef SDRAM_DEBUG
-	serial_puts ("CAL: ");
-	write_hex (cal_val + 1);
-	serial_puts ("\n");
-#endif
-
-	if (cal_val == 255)
-		SDRAM_err ("unsupported SDRAM");
-
-	/* get SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	tmp = mfdcr (memcfgd) & ~0x018FC01F;
-	/* insert CASL value */
-/*  tmp |= ((unsigned long)cal_val) << 23; */
-	tmp |= ((unsigned long) cal_val) << 23;
-	/* insert PTA value */
-	tmp |= ((unsigned long) (trp_clocks - 1)) << 18;
-	/* insert CTP value */
-/*  tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */
-	tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16;
-	/* insert LDF (always 01) */
-	tmp |= ((unsigned long) 0x01) << 14;
-	/* insert RFTA value */
-	tmp |= ((unsigned long) (trc_clocks - 4)) << 2;
-	/* insert RCD value */
-	tmp |= ((unsigned long) (trcd_clocks - 1)) << 0;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("sdtr: ");
-	write_4hex (tmp);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, tmp);
-	baseaddr = CFG_SDRAM_BASE;
-	bank_size = (((unsigned long) density) << 22) / 2;
-	/* insert AM value */
-	tmp = ((unsigned long) t->mode - 1) << 13;
-	/* insert SZ value; */
-	switch (bank_size) {
-	case 0x00400000:
-		tmp |= ((unsigned long) 0x00) << 17;
-		break;
-	case 0x00800000:
-		tmp |= ((unsigned long) 0x01) << 17;
-		break;
-	case 0x01000000:
-		tmp |= ((unsigned long) 0x02) << 17;
-		break;
-	case 0x02000000:
-		tmp |= ((unsigned long) 0x03) << 17;
-		break;
-	case 0x04000000:
-		tmp |= ((unsigned long) 0x04) << 17;
-		break;
-	case 0x08000000:
-		tmp |= ((unsigned long) 0x05) << 17;
-		break;
-	case 0x10000000:
-		tmp |= ((unsigned long) 0x06) << 17;
-		break;
-	default:
-		SDRAM_err ("unsupported SDRAM");
-	}	/* endswitch */
-	/* get SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
-	bank |= (baseaddr | tmp | 0x01);
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank0: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-	serial_puts (" mb0cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-	baseaddr += bank_size;
-	sdram_size += bank_size;
-
-	/* write SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, bank);
-
-	/* get SDRAM bank 1 register */
-	mtdcr (memcfga, mem_mb1cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
-	sdram_size = 0;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank1: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-#endif
-	if (banks == 2) {
-		bank |= (baseaddr | tmp | 0x01);
-		baseaddr += bank_size;
-		sdram_size += bank_size;
-	}	/* endif */
-#ifdef SDRAM_DEBUG
-	serial_puts (" mb1cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-	/* write SDRAM bank 1 register */
-	mtdcr (memcfga, mem_mb1cf);
-	mtdcr (memcfgd, bank);
-
-	/* get SDRAM bank 2 register */
-	mtdcr (memcfga, mem_mb2cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
-
-	bank |= (baseaddr | tmp | 0x01);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank2: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-	serial_puts (" mb2cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-
-	baseaddr += bank_size;
-	sdram_size += bank_size;
-
-	/* write SDRAM bank 2 register */
-	mtdcr (memcfga, mem_mb2cf);
-	mtdcr (memcfgd, bank);
-
-	/* get SDRAM bank 3 register */
-	mtdcr (memcfga, mem_mb3cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank3: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-#endif
-
-	if (banks == 2) {
-		bank |= (baseaddr | tmp | 0x01);
-		baseaddr += bank_size;
-		sdram_size += bank_size;
-	}
-	/* endif */
-#ifdef SDRAM_DEBUG
-	serial_puts (" mb3cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM bank 3 register */
-	mtdcr (memcfga, mem_mb3cf);
-	mtdcr (memcfgd, bank);
-
-
-	/* get SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	tmp = mfdcr (memcfgd) & ~0x3FF80000;
-
-	if (tmemclk < NSto10PS (16))
-		tmp |= 0x05F00000;
-	else
-		tmp |= 0x03F80000;
-
-	/* write SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, tmp);
-
-	/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-	mtdcr (memcfga, mem_mcopt1);
-	tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000;
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, tmp);
-
-
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the PIP405 board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive
-   |       IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
-   |       IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for PIP405 board:
-   |       An interrupt taken for the SouthBridge (IRQ 25) indicates that
-   |       the Interrupt Controller in the South Bridge has caused the
-   |       interrupt. The IC must be read to determine which device
-   |       caused the interrupt.
-   |
-   +-------------------------------------------------------------------------*/
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (uicer, 0x00000000);	/* disable all ints */
-	mtdcr (uiccr, 0x00000000);	/* set all to be non-critical (for now) */
-	mtdcr (uicpr, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char s[50];
-	unsigned char bc;
-	int i;
-	backup_t *b = (backup_t *) s;
-
-	puts ("Board: ");
-
-	i = getenv_r ("serial#", (char *)s, 32);
-	if ((i == 0) || strncmp ((char *)s, "PIP405", 6)) {
-		get_backup_values (b);
-		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming PIP405");
-		} else {
-			b->serial_name[6] = 0;
-			printf ("%s SN: %s", b->serial_name,
-				&b->serial_name[7]);
-		}
-	} else {
-		s[6] = 0;
-		printf ("%s SN: %s", s, &s[7]);
-	}
-	bc = in8 (CONFIG_PORT_ADDR);
-	printf (" Boot Config: 0x%x\n", bc);
-	return (0);
-}
-
-
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/*
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-*/
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-static int test_dram (unsigned long ramsize);
-
-long int initdram (int board_type)
-{
-	unsigned long bank_reg[4], tmp, bank_size;
-	int i, ds;
-	unsigned long TotalSize;
-
-	ds = 0;
-	/* since the DRAM controller is allready set up,
-	 * calculate the size with the bank registers
-	 */
-	mtdcr (memcfga, mem_mb0cf);
-	bank_reg[0] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb1cf);
-	bank_reg[1] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb2cf);
-	bank_reg[2] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb3cf);
-	bank_reg[3] = mfdcr (memcfgd);
-	TotalSize = 0;
-	for (i = 0; i < 4; i++) {
-		if ((bank_reg[i] & 0x1) == 0x1) {
-			tmp = (bank_reg[i] >> 17) & 0x7;
-			bank_size = 4 << tmp;
-			TotalSize += bank_size;
-		} else
-			ds = 1;
-	}
-	if (ds == 1)
-		printf ("single-sided DIMM ");
-	else
-		printf ("double-sided DIMM ");
-	test_dram (TotalSize * 1024 * 1024);
-	/* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */
-	(void) get_clocks();
-	if (gd->cpu_clk > 220000000)
-		TotalSize /= 2;
-	return (TotalSize * 1024 * 1024);
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-static int test_dram (unsigned long ramsize)
-{
-	/* not yet implemented */
-	return (1);
-}
-
-
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-int misc_init_r (void)
-{
-	/* adjust flash start and size as well as the offset */
-	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
-	gd->bd->bi_flashoffset=0;
-
-	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(strap) & PSR_ROM_LOC)
-	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
-
-	return (0);
-}
-
-/***************************************************************************
- * some helping routines
- */
-
-int overwrite_console (void)
-{
-	return (in8 (CONFIG_PORT_ADDR) & 0x1);	/* return TRUE if console should be overwritten */
-}
-
-
-extern int isa_init (void);
-
-
-void print_pip405_rev (void)
-{
-	unsigned char part, vers, cfg;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	printf ("Rev:   PIP405-%d Rev %c PLD%d %d PLD%d %d\n",
-			16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf,
-			vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf);
-}
-
-extern void check_env(void);
-
-
-int last_stage_init (void)
-{
-	print_pip405_rev ();
-	isa_init ();
-	show_stdio_dev ();
-	check_env();
-	return 0;
-}
-
-/************************************************************************
-* Print PIP405 Info
-************************************************************************/
-void print_pip405_info (void)
-{
-	unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr,
-			compwr, nicvga, scsirst;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	ledu = in8 (PLD_LED_USER_REG);
-	sysman = in8 (PLD_SYS_MAN_REG);
-	flashcom = in8 (PLD_FLASH_COM_REG);
-	can = in8 (PLD_CAN_REG);
-	serpwr = in8 (PLD_SER_PWR_REG);
-	compwr = in8 (PLD_COM_PWR_REG);
-	nicvga = in8 (PLD_NIC_VGA_REG);
-	scsirst = in8 (PLD_SCSI_RST_REG);
-	printf ("PLD Part %d version %d\n",
-		part & 0xf, vers & 0xf);
-	printf ("PLD Part %d version %d\n",
-		(part >> 4) & 0xf, (vers >> 4) & 0xf);
-	printf ("Board Revision %c\n", (cfg & 0xf) + 'A');
-	printf ("Population Options %d %d %d %d\n",
-		(cfg >> 4) & 0x1, (cfg >> 5) & 0x1,
-		(cfg >> 6) & 0x1, (cfg >> 7) & 0x1);
-	printf ("User LED0 %s User LED1 %s\n",
-		((ledu & 0x1) == 0x1) ? "on" : "off",
-		((ledu & 0x2) == 0x2) ? "on" : "off");
-	printf ("Additionally Options %d %d\n",
-		(ledu >> 2) & 0x1, (ledu >> 3) & 0x1);
-	printf ("User Config Switch %d %d %d %d\n",
-		(ledu >> 4) & 0x1, (ledu >> 5) & 0x1,
-		(ledu >> 6) & 0x1, (ledu >> 7) & 0x1);
-	switch (sysman & 0x3) {
-	case 0:
-		printf ("PCI Clocks are running\n");
-		break;
-	case 1:
-		printf ("PCI Clocks are stopped in POS State\n");
-		break;
-	case 2:
-		printf ("PCI Clocks are stopped when PCI_STP# is asserted\n");
-		break;
-	case 3:
-		printf ("PCI Clocks are stopped\n");
-		break;
-	}
-	switch ((sysman >> 2) & 0x3) {
-	case 0:
-		printf ("Main Clocks are running\n");
-		break;
-	case 1:
-		printf ("Main Clocks are stopped in POS State\n");
-		break;
-	case 2:
-	case 3:
-		printf ("PCI Clocks are stopped\n");
-		break;
-	}
-	printf ("INIT asserts %sINT2# (SMI)\n",
-			((sysman & 0x10) == 0x10) ? "" : "not ");
-	printf ("INIT asserts %sINT1# (NMI)\n",
-			((sysman & 0x20) == 0x20) ? "" : "not ");
-	printf ("INIT occured %d\n", (sysman >> 6) & 0x1);
-	printf ("SER1 is routed to %s\n",
-			((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
-	printf ("COM2 is routed to %s\n",
-			((flashcom & 0x2) == 0x2) ? "RS485" : "RS232");
-	printf ("RS485 is configured as %s duplex\n",
-			((flashcom & 0x4) == 0x4) ? "full" : "half");
-	printf ("RS485 is connected to %s\n",
-			((flashcom & 0x8) == 0x8) ? "COM1" : "COM2");
-	printf ("SER1 uses handshakes %s\n",
-			((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS");
-	printf ("Bootflash is %swriteprotected\n",
-			((flashcom & 0x20) == 0x20) ? "not " : "");
-	printf ("Bootflash VPP is %s\n",
-			((flashcom & 0x40) == 0x40) ? "on" : "off");
-	printf ("Bootsector is %swriteprotected\n",
-			((flashcom & 0x80) == 0x80) ? "not " : "");
-	switch ((can) & 0x3) {
-	case 0:
-		printf ("CAN Controller is on address 0x1000..0x10FF\n");
-		break;
-	case 1:
-		printf ("CAN Controller is on address 0x8000..0x80FF\n");
-		break;
-	case 2:
-		printf ("CAN Controller is on address 0xE000..0xE0FF\n");
-		break;
-	case 3:
-		printf ("CAN Controller is disabled\n");
-		break;
-	}
-	switch ((can >> 2) & 0x3) {
-	case 0:
-		printf ("CAN Controller Reset is ISA Reset\n");
-		break;
-	case 1:
-		printf ("CAN Controller Reset is ISA Reset and POS State\n");
-		break;
-	case 2:
-	case 3:
-		printf ("CAN Controller is in reset\n");
-		break;
-	}
-	if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13))
-		printf ("CAN Interrupt is disabled\n");
-	else
-		printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf);
-	switch (serpwr & 0x3) {
-	case 0:
-		printf ("SER0 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("SER0 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SER0 Drivers are disabled\n");
-		break;
-	}
-	switch ((serpwr >> 2) & 0x3) {
-	case 0:
-		printf ("SER1 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("SER1 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SER1 Drivers are disabled\n");
-		break;
-	}
-	switch (compwr & 0x3) {
-	case 0:
-		printf ("COM1 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("COM1 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("COM1 Drivers are disabled\n");
-		break;
-	}
-	switch ((compwr >> 2) & 0x3) {
-	case 0:
-		printf ("COM2 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("COM2 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("COM2 Drivers are disabled\n");
-		break;
-	}
-	switch ((nicvga) & 0x3) {
-	case 0:
-		printf ("PHY is running\n");
-		break;
-	case 1:
-		printf ("PHY is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("PHY is in Power save mode\n");
-		break;
-	}
-	switch ((nicvga >> 2) & 0x3) {
-	case 0:
-		printf ("VGA is running\n");
-		break;
-	case 1:
-		printf ("VGA is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("VGA is in Power save mode\n");
-		break;
-	}
-	printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not ");
-	printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not ");
-	printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1,
-			(nicvga >> 7) & 0x1);
-	switch ((scsirst) & 0x3) {
-	case 0:
-		printf ("SCSI Controller is running\n");
-		break;
-	case 1:
-		printf ("SCSI Controller is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SCSI Controller is in Power save mode\n");
-		break;
-	}
-	printf ("SCSI termination is %s\n",
-			((scsirst & 0x4) == 0x4) ? "disabled" : "enabled");
-	printf ("SCSI Controller is %sreseted\n",
-			((scsirst & 0x10) == 0x10) ? "" : "not ");
-	printf ("IDE disks are %sreseted\n",
-			((scsirst & 0x20) == 0x20) ? "" : "not ");
-	printf ("ISA Bus is %sreseted\n",
-			((scsirst & 0x40) == 0x40) ? "" : "not ");
-	printf ("Super IO is %sreseted\n",
-			((scsirst & 0x80) == 0x80) ? "" : "not ");
-}
-
-void user_led0 (unsigned char on)
-{
-	if (on == TRUE)
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
-	else
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
-}
-
-void user_led1 (unsigned char on)
-{
-	if (on == TRUE)
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
-	else
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));
-}
-
-void ide_set_reset (int idereset)
-{
-	/* if reset = 1 IDE reset will be asserted */
-	unsigned char resreg;
-
-	resreg = in8 (PLD_SCSI_RST_REG);
-	if (idereset == 1)
-		resreg |= 0x20;
-	else {
-		udelay(10000);
-		resreg &= 0xdf;
-	}
-	out8 (PLD_SCSI_RST_REG, resreg);
-}
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
deleted file mode 100644
index b41c5bb282..0000000000
--- a/board/mpl/pip405/pip405.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
- /****************************************************************************
- * Global routines used for PIP405
- *****************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
-
-void print_pip405_info(void);
-
-void user_led0(unsigned char on);
-void user_led1(unsigned char on);
-
-
-#define PLD_BASE_ADDRESS		CFG_ISA_IO_BASE_ADDRESS + 0x800
-#define PLD_PART_REG			PLD_BASE_ADDRESS + 0
-#define PLD_VERS_REG			PLD_BASE_ADDRESS + 1
-#define PLD_BOARD_CFG_REG		PLD_BASE_ADDRESS + 2
-#define PLD_LED_USER_REG		PLD_BASE_ADDRESS + 3
-#define PLD_SYS_MAN_REG			PLD_BASE_ADDRESS + 4
-#define PLD_FLASH_COM_REG		PLD_BASE_ADDRESS + 5
-#define PLD_CAN_REG			PLD_BASE_ADDRESS + 6
-#define PLD_SER_PWR_REG			PLD_BASE_ADDRESS + 7
-#define PLD_COM_PWR_REG			PLD_BASE_ADDRESS + 8
-#define PLD_NIC_VGA_REG			PLD_BASE_ADDRESS + 9
-#define PLD_SCSI_RST_REG		PLD_BASE_ADDRESS + 0xA
-
-#define PIIX4_VENDOR_ID			0x8086
-#define PIIX4_IDE_DEV_ID		0x7111
-
-#endif
-
-/* timings */
-
-/* CS Config register (CS7) */
-#define CONFIG_PORT_BME	0 	/* Burst disable */
-#define CONFIG_PORT_TWE	255	/* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define CONFIG_PORT_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define CONFIG_PORT_OEN	1	/* Cycles from CS low to OE low   */
-#define CONFIG_PORT_WBN	1	/* Cycles from CS low to WE low   */
-#define CONFIG_PORT_WBF	1	/* Cycles from WE high to CS high */
-#define CONFIG_PORT_TH	2	/* Number of hold cycles after transfer */
-#define CONFIG_PORT_RE	0	/* Ready disabled */
-#define CONFIG_PORT_SOR	1	/* Sample on Ready disabled */
-#define CONFIG_PORT_BEM	0	/* Byte Write only active on Write cycles */
-#define CONFIG_PORT_PEN	0	/* Parity disable */
-#define CONFIG_PORT_AP 	((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \
-				(CONFIG_PORT_WBF << 12) + (CONFIG_PORT_TH << 9) + (CONFIG_PORT_RE << 8) + (CONFIG_PORT_SOR << 7) + (CONFIG_PORT_BEM << 6) + (CONFIG_PORT_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define CONFIG_PORT_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define CONFIG_PORT_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define CONFIG_PORT_BW	0	/* 16Bit */
-#define CONFIG_PORT_CR	((CONFIG_PORT_ADDR & 0xfff00000) + (CONFIG_PORT_BS << 17) + (CONFIG_PORT_BU << 15) + (CONFIG_PORT_BW << 13))
-
-/* Flash CS0 or CS 1 */
-/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B	1 	/* Burst enable */
-#define FLASH_FWT_B	0x6	/* 6 * 30ns 210ns First Wait Access */
-#define FLASH_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME	0 	/* Burst disable */
-#define FLASH_TWE	0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define FLASH_CSN	0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define FLASH_OEN	1	/* Cycles from CS low to OE low   */
-#define FLASH_WBN	1	/* Cycles from CS low to WE low   */
-#define FLASH_WBF	1	/* Cycles from WE high to CS high */
-#define FLASH_TH	2	/* Number of hold cycles after transfer */
-#define FLASH_RE	0	/* Ready disabled */
-#define FLASH_SOR	1	/* Sample on Ready disabled */
-#define FLASH_BEM	0	/* Byte Write only active on Write cycles */
-#define FLASH_PEN	0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define FLASH_AP 	((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-				(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-/* Access Parameter Register for Boot */
-#define FLASH_AP_B 	((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-				(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS	FLASH_SIZE_PRELIM	/* 4 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define FLASH_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define FLASH_BW	1	/* 16Bit */
-/* CR register for Boot */
-#define FLASH_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-/* CR register for non Boot */
-#define FLASH_CR	((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-
-/* MPS CS1 or CS0 */
-/* Boot CS: */
-#define MPS_BME_B	1 	/* Burst enable */
-#define MPS_FWT_B	0x6/* 6 * 30ns 210ns First Wait Access */
-#define MPS_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME		0 	/* Burst disable */
-#define MPS_TWE		0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define MPS_CSN		0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define MPS_OEN		1	/* Cycles from CS low to OE low   */
-#define MPS_WBN		1	/* Cycles from CS low to WE low   */
-#define MPS_WBF		1	/* Cycles from WE high to CS high */
-#define MPS_TH		2	/* Number of hold cycles after transfer */
-#define MPS_RE		0	/* Ready disabled */
-#define MPS_SOR		1	/* Sample on Ready disabled */
-#define MPS_BEM		0	/* Byte Write only active on Write cycles */
-#define MPS_PEN		0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define MPS_AP 		((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-				(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-/* Access Parameter Register for Boot */
-#define MPS_AP_B 	((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-				(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define MPS_BS		2	/* 4 MByte */
-#define MPS_BS_B		FLASH_SIZE_PRELIM	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define MPS_BU		3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define MPS_BW		0	/* 8Bit */
-/* CR register for Boot */
-#define MPS_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
-/* CR register for non Boot */
-#define MPS_CR		((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds
deleted file mode 100644
index 11819a4fcb..0000000000
--- a/board/mpl/pip405/u-boot.lds
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/mpl/pip405/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
deleted file mode 100644
index 1608f8cdaa..0000000000
--- a/board/mpl/pip405/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
deleted file mode 100644
index 73addcf60d..0000000000
--- a/board/mx1ads/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += mx1ads.o syncflash.o lowlevel_init.o
\ No newline at end of file
diff --git a/board/mx1ads/config.mk b/board/mx1ads/config.mk
deleted file mode 100644
index f6ac40d34a..0000000000
--- a/board/mx1ads/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# board/mx1ads/config.mk
-#
-# (c) Copyright 2004
-# Techware Information Technology, Inc.
-# http://www.techware.com.tw/
-#
-# Ming-Len Wu <minglen_wu@techware.com.tw>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-TEXT_BASE = 0x08400000
diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S
deleted file mode 100644
index 09c260d64d..0000000000
--- a/board/mx1ads/lowlevel_init.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * board/mx1ads/lowlevel_init.S
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#define SDCTL0			0x221000
-#define SDCTL1			0x221004
-
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
-/* memory controller init	 	*/
-
-	ldr  r1, =SDCTL0
-
-/*  Set Precharge Command		*/
-
-	ldr  r3, =0x92120200
-/*	ldr  r3, =0x92120251
-*/
-	str  r3, [r1]
-
-/* Issue Precharge All Commad		*/
-	ldr  r3, =0x8200000
-	ldr  r2, [r3]
-
-/* Set AutoRefresh Command 		*/
-	ldr  r3, =0xA2120200
-	str  r3, [r1]
-
-/* Issue AutoRefresh Command		*/
-	ldr  r3, =0x8000000
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-	ldr  r2, [r3]
-
-/* Set Mode Register 			*/
-	ldr  r3, =0xB2120200
-	str  r3, [r1]
-
-/* Issue Mode Register Command		*/
-	ldr  r3, =0x08111800 	/* Mode Register Value 		*/
-	ldr  r2, [r3]
-
-/* Set Normal Mode			*/
-	ldr  r3, =0x82124200
-	str  r3, [r1]
-
-/* everything is fine now 		*/
-	mov	pc, lr
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
deleted file mode 100644
index d86f0798e5..0000000000
--- a/board/mx1ads/mx1ads.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * board/mx1ads/mx1ads.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV	0xC3
-#define M_PDIV	0x4
-#define M_SDIV	0x1
-#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
-#define M_MDIV	0xA1
-#define M_PDIV	0x3
-#define M_SDIV	0x1
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV	0xA1
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV	0x48
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x2
-#endif
-
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-void SetAsynchMode (void)
-{
-	__asm__ ("mrc p15,0,r0,c1,c0,0 \n"
-		 "mov r2, #0xC0000000 \n"
-		 "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
-}
-
-static u32 mc9328sid;
-
-int board_init (void)
-{
-	volatile unsigned int tmp;
-
-	mc9328sid = SIDR;
-
-	GPCR = 0x000003AB;	/* I/O pad driving strength     */
-
-	/*	MX1_CS1U 	= 0x00000A00;	*/ /* SRAM initialization          */
-/*	MX1_CS1L 	= 0x11110601; 	*/
-
-	MPCTL0 = 0x04632410;	/* setting for 150 MHz MCU PLL CLK      */
-
-/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
- * BCLK divider to 2 (i.e. BCLK to 48 MHz)
- */
-	CSCR = 0xAF000403;
-
-	CSCR |= 0x00200000;	/* Trigger the restart bit(bit 21)      */
-	CSCR &= 0xFFFF7FFF;	/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
-
-/* setup cs4 for cs8900 ethernet */
-
-	CS4U = 0x00000F00;	/* Initialize CS4 for CS8900 ethernet   */
-	CS4L = 0x00001501;
-/* FIXME: Use reg2-fix for this */
-//	GIUS (0) &= 0xFF3FFFFF;
-//	GPR (0) &= 0xFF3FFFFF;
-
-	tmp = *(unsigned int *) (0x1500000C);
-	tmp = *(unsigned int *) (0x1500000C);
-
-	SetAsynchMode ();
-
-	gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
-
-	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters    */
-
-	icache_enable ();
-	dcache_enable ();
-
-/* set PERCLKs				*/
-	PCDR = 0x00000055;	/* set PERCLKS                          */
-
-/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
- * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
- * all sources selected as normal interrupt
- */
-
-/*	MX1_INTTYPEH = 0;
-	MX1_INTTYPEL = 0;
-*/
-	return 0;
-}
-
-int board_late_init (void)
-{
-
-	setenv ("stdout", "serial");
-	setenv ("stderr", "serial");
-
-	switch (mc9328sid) {
-	case 0x0005901d:
-		printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-	case 0x04d4c01d:
-		printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-	case 0x00d4c01d:
-		printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-
-	default:
-		printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
-			mc9328sid);
-		break;
-	}
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
deleted file mode 100644
index 1a384499cf..0000000000
--- a/board/mx1ads/syncflash.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * board/mx1ads/syncflash.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-
-typedef unsigned long * p_u32;
-
-/* 4Mx16x2 IAM=0 CSD1 */
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/*  Following Setting is for CSD1	*/
-#define SFCTL			0x00221004
-#define reg_SFCTL		__REG(SFCTL)
-
-#define SYNCFLASH_A10		(0x00100000)
-
-#define CMD_NORMAL		(0x81020300)			/* Normal Mode			*/
-#define CMD_PREC		(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
-#define CMD_AUTO		(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
-#define CMD_LMR			(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
-#define CMD_LCR			(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
-#define CMD_PROGRAM		(CMD_NORMAL + 0x70000000)
-
-#define MODE_REG_VAL		(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
-
-/* LCR Command */
-#define LCR_READSTATUS		(0x0001C000)			/* 0x70				*/
-#define LCR_ERASE_CONFIRM	(0x00008000)			/* 0x20				*/
-#define LCR_ERASE_NVMODE	(0x0000C000)			/* 0x30				*/
-#define LCR_PROG_NVMODE		(0x00028000)			/* 0xA0				*/
-#define LCR_SR_CLEAR		(0x00014000)			/* 0x50				*/
-
-/* Get Status register 			*/
-u32 SF_SR(void) {
-	u32 tmp,tmp1;
-
-	reg_SFCTL	= CMD_PROGRAM;
-	tmp 		= __REG(CFG_FLASH_BASE);
-
-	reg_SFCTL	= CMD_NORMAL;
-
-	reg_SFCTL	= CMD_LCR;			/* Activate LCR Mode 		*/
-	tmp1 		= __REG(CFG_FLASH_BASE + LCR_SR_CLEAR);
-
-	return tmp;
-}
-
-/* check if SyncFlash is ready 		*/
-u8 SF_Ready(void) {
-	u32 tmp;
-
-	tmp	= SF_SR();
-
-	if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
-		printf ("SyncFlash Error code %08x\n",tmp);
-	};
-
-	if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
-		printf ("SyncFlash Error code %08x\n",tmp);
-	};
-
-	if (tmp == 0x00800080) 		/* Test Bit 7 of SR	*/
-		return 1;
-	else
-		return 0;
-}
-
-/* Issue the precharge all command 		*/
-void SF_PrechargeAll(void) {
-
-	u32 tmp;
-
-	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command 	*/
-	tmp 		= __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
-}
-
-/* set SyncFlash to normal mode			*/
-void SF_Normal(void) {
-
-	SF_PrechargeAll();
-
-	reg_SFCTL	= CMD_NORMAL;
-}
-
-/* Erase SyncFlash 				*/
-void SF_Erase(u32 RowAddress) {
-	u32 tmp;
-
-	reg_SFCTL	= CMD_NORMAL;
-	tmp 		= __REG(RowAddress);
-
-	reg_SFCTL	= CMD_PREC;
-	tmp 		= __REG(RowAddress);
-
-	reg_SFCTL 	= CMD_LCR;			/* Set LCR mode 		*/
-	__REG(RowAddress + LCR_ERASE_CONFIRM)	= 0;	/* Issue Erase Setup Command 	*/
-
-	reg_SFCTL	= CMD_NORMAL;			/* return to Normal mode 	*/
-	__REG(RowAddress)	= 0xD0D0D0D0; 		/* Confirm			*/
-
-	while(!SF_Ready());
-}
-
-void SF_NvmodeErase(void) {
-	SF_PrechargeAll();
-
-	reg_SFCTL	= CMD_LCR;			/* Set to LCR mode		*/
-	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE)  = 0;	/* Issue Erase Nvmode Reg Command */
-
-	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
-	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0;	/* Confirm 		*/
-
-	while(!SF_Ready());
-}
-
-void SF_NvmodeWrite(void) {
-	SF_PrechargeAll();
-
-	reg_SFCTL 	= CMD_LCR;			/* Set to LCR mode 		*/
-	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0;	/* Issue Program Nvmode reg command */
-
-	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
-	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; 	/* Confirm not needed 	*/
-}
-
-/****************************************************************************************/
-
-ulong flash_init(void) {
-	int i, j;
-	u32 tmp;
-
-/* Turn on CSD1 for negating RESETSF of SyncFLash */
-
-	reg_SFCTL 	|= 0x80000000;		/* enable CSD1 for SyncFlash 		*/
-	udelay(200);
-
-	reg_SFCTL 	= CMD_LMR;		/* Set Load Mode Register Command 	*/
-	tmp 		= __REG(MODE_REG_VAL);	/* Issue Load Mode Register Command 	*/
-
-	SF_Normal();
-
-	i = 0;
-
-	flash_info[i].flash_id 	=  FLASH_MAN_MT | FLASH_MT28S4M16LC;
-
-	flash_info[i].size 	= FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-
-	for (j = 0; j < flash_info[i].sector_count; j++) {
-		flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000;
-	}
-
-	flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE + monitor_flash_len - 1,
-		&flash_info[0]);
-
-	flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		&flash_info[0]);
-
-	return FLASH_BANK_SIZE;
-}
-
-void flash_print_info (flash_info_t *info) {
-
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-		case (FLASH_MAN_MT & FLASH_VENDMASK):
-			printf("Micron: ");
-			break;
-		default:
-			printf("Unknown Vendor ");
-			break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-		case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
-			printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
-			break;
-		default:
-			printf("Unknown Chip Type\n");
-			return;
-			break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses: ");
-
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------*/
-
-int flash_erase (flash_info_t *info, int s_first, int s_last) {
-	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
-
-/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last))
-		return ERR_INVAL;
-
-	if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	prot = 0;
-
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf("protected!\n");
-		return ERR_PROTECTED;
-	}
-/*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
-	cflag = icache_status();
-	icache_disable();
-	iflag = disable_interrupts();
-
-/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
-
-		printf("Erasing sector %2d ... ", sect);
-
-/* arm simple, non interrupt dependent timer */
-
-		SF_NvmodeErase();
-		SF_NvmodeWrite();
-
-		SF_Erase(CFG_FLASH_BASE + (0x0100000 * sect));
-		SF_Normal();
-
-		printf("ok.\n");
-	}
-
-	if (ctrlc())
-		printf("User Interrupt!\n");
-
-	if (iflag)
-		enable_interrupts();
-
-	if (cflag)
-		icache_enable();
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
-	int i;
-
-	for(i = 0; i < cnt; i += 4) {
-
-		SF_PrechargeAll();
-
-		reg_SFCTL	= CMD_PROGRAM;		/* Enter SyncFlash Program mode */
-		__REG(addr + i) = __REG((u32)src  + i);
-
-		while(!SF_Ready());
-	}
-
-	SF_Normal();
-
-	return ERR_OK;
-}
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
deleted file mode 100644
index 8438f99f78..0000000000
--- a/board/mx1ads/u-boot.lds
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * board/mx1ads/u-boot.lds
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm920t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile
deleted file mode 100644
index fe4b8d6524..0000000000
--- a/board/omap1510inn/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= omap1510innovator.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/omap1510inn/config.mk b/board/omap1510inn/config.mk
deleted file mode 100644
index 7b24780cda..0000000000
--- a/board/omap1510inn/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Innovator board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000  (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-
-TEXT_BASE = 0x11080000
diff --git a/board/omap1510inn/lowlevel_init.S b/board/omap1510inn/lowlevel_init.S
deleted file mode 100644
index 1c68e5b816..0000000000
--- a/board/omap1510inn/lowlevel_init.S
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
-	.word	TEXT_BASE        /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*
-	 * Configure 1510 pins functions to match our board.
-	 */
-	ldr     r0, REG_PULL_DWN_CTRL_0
-	ldr     r1, VAL_PULL_DWN_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_1
-	ldr     r1, VAL_PULL_DWN_CTRL_1
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_2
-	ldr     r1, VAL_PULL_DWN_CTRL_2
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_3
-	ldr     r1, VAL_PULL_DWN_CTRL_3
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_4
-	ldr     r1, VAL_FUNC_MUX_CTRL_4
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_5
-	ldr     r1, VAL_FUNC_MUX_CTRL_5
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_6
-	ldr     r1, VAL_FUNC_MUX_CTRL_6
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_7
-	ldr     r1, VAL_FUNC_MUX_CTRL_7
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_8
-	ldr     r1, VAL_FUNC_MUX_CTRL_8
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_9
-	ldr     r1, VAL_FUNC_MUX_CTRL_9
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_A
-	ldr     r1, VAL_FUNC_MUX_CTRL_A
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_B
-	ldr     r1, VAL_FUNC_MUX_CTRL_B
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_C
-	ldr     r1, VAL_FUNC_MUX_CTRL_C
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_D
-	ldr     r1, VAL_FUNC_MUX_CTRL_D
-	str     r1, [r0]
-	ldr     r0, REG_VOLTAGE_CTRL_0
-	ldr     r1, VAL_VOLTAGE_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_TEST_DBG_CTRL_0
-	ldr     r1, VAL_TEST_DBG_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_MOD_CONF_CTRL_0
-	ldr     r1, VAL_MOD_CONF_CTRL_0
-	str     r1, [r0]
-
-	/* Move to 1510 mode */
-	ldr     r0, REG_COMP_MODE_CTRL_0
-	ldr     r1, VAL_COMP_MODE_CTRL_0
-	str     r1, [r0]
-
-	/* Set up Traffic Ctlr*/
-	ldr r0, REG_TC_IMIF_PRIO
-	mov r1, #0x0
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFS_PRIO
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFF_PRIO
-	str r1, [r0]
-
-	ldr r0, REG_TC_EMIFS_CONFIG
-	ldr r1, [r0]
-	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
-	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
-	str r1, [r0]        /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
-	/* Setup some clock domains */
-	ldr r1, =OMAP1510_CLKS
-	ldr r0, REG_ARM_IDLECT2
-	strh r1, [r0]  /* CLKM, Clock domain control. */
-
-	mov r1, #0x01  /* PER_EN bit */
-	ldr r0, REG_ARM_RSTCT2
-	strh r1, [r0]  /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable  */
-	/* I supposidly need to enable the dsp clock before switching */
-	mov r1, #0x1000
-	ldr r0, REG_ARM_SYSST
-	strh r1, [r0]
-	mov r0, #0x400
-1:
-	subs r0, r0, #0x1   /* wait for any bubbles to finish */
-	bne 1b
-
-	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
-	ldr r0, REG_ARM_CKCTL
-	strh r1, [r0]
-
-	/* setup DPLL 1 */
-	ldr r1, VAL_DPLL1_CTL
-	ldr r0, REG_DPLL1_CTL
-	strh r1, [r0]
-	ands r1, r1, #0x10  /* Check if PLL is enabled. */
-	beq lock_end        /* Do not look for lock if BYPASS selected */
-2:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01  /* Check the LOCK bit. */
-	beq 2b              /* ...loop until bit goes hi. */
-lock_end:
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov r0, #0x10000000                 /* Load physical SDRAM base. */
-	mov r1, pc                          /* Get current execution location. */
-	/* Zero all but top 6 bits of PC, as they alone detect whether an
-	 * address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized
-	 * valid range for SDRAM on the OMAP 1510/5910.
-	 */
-	and r1, r1, #0xfc000000
-	cmp r1, r0			/* Compare. */
-	beq skip_sdram			/* Skip over EMIF-fast initialization
-					 * if running from SDRAM.
-					 */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800                        /* value should be checked */
-3:
-	subs r3, r3, #0x1                     /* Decrement count */
-	bne 3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
-	bic r3, r0, #0xC                    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
-	orr r3, r3, #0x8000000              /* (BIT27) Disable CLK when Power down or Self-Refresh */
-	orr r3, r3, #0x4000000              /* BIT26 Power Down Enable */
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r3, [r2]                        /* Store the passed value with AR disabled. */
-
-	ldr r1, VAL_TC_EMIFF_MRS            /* get MRS value */
-	ldr r2, REG_TC_EMIFF_MRS            /* Point to MRS register. */
-	str r1, [r2]                        /* Store the passed value.*/
-
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r0, [r2]                        /* Store the passed value. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800
-4:
-	subs r3, r3, #1                     /* Decrement count. */
-	bne 4b
-
-skip_sdram:
-
-	/* slow interface */
-	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
-	ldr r0, REG_TC_EMIFS_CS0_CONFIG
-	str r1, [r0] /* Chip Select 0 */
-	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
-	ldr r0, REG_TC_EMIFS_CS1_CONFIG
-	str r1, [r0] /* Chip Select 1 */
-	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
-	ldr r0, REG_TC_EMIFS_CS2_CONFIG
-	str r1, [r0] /* Chip Select 2 */
-	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
-	ldr r0, REG_TC_EMIFS_CS3_CONFIG
-	str r1, [r0] /* Chip Select 3 */
-
- /* Next, Enable the RS232 Line Drivers in the FPGA. */
- /* Also, power on the audio CODEC's amplifier here, */
- /* which will make a noise on the audio output. */
- /* This is done here instead of in the kernel so there */
- /* isn't a loud popping noise at the start of each */
- /* song. */
- /* Also, disable the CODEC's clocks. */
- /* omap1510-HelenP1 [specific] */
-
-	ldr r0, REG_FPGA_POWER
-	mov r1, #0
-	ldr r2, REG_FPGA_DIP_SWITCH
-	ldrb r3, [r2]
-	cmp r3, #0x8
-	movne r1, #0x62     /* Enable the RS232 Line Drivers in the EPLD */
-	strb r1, [r0]
-	ldr r0, REG_FPGA_AUDIO
-	mov r1, #0x0     /* Disable sound driver (CODEC clocks) */
-	strb r1, [r0]
-
-	/* back to arch calling code */
-	mov	pc, lr
-
-/* the literal pools origin */
-	.ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0:		/* 32 bits */
-	.word 0xfffe1000
-REG_FUNC_MUX_CTRL_1:		/* 32 bits */
-	.word 0xfffe1004
-REG_FUNC_MUX_CTRL_2:		/* 32 bits */
-	.word 0xfffe1008
-REG_COMP_MODE_CTRL_0:		/* 32 bits */
-	.word 0xfffe100c
-REG_FUNC_MUX_CTRL_3:		/* 32 bits */
-	.word 0xfffe1010
-REG_FUNC_MUX_CTRL_4:		/* 32 bits */
-	.word 0xfffe1014
-REG_FUNC_MUX_CTRL_5:		/* 32 bits */
-	.word 0xfffe1018
-REG_FUNC_MUX_CTRL_6:		/* 32 bits */
-	.word 0xfffe101c
-REG_FUNC_MUX_CTRL_7:		/* 32 bits */
-	.word 0xfffe1020
-REG_FUNC_MUX_CTRL_8:		/* 32 bits */
-	.word 0xfffe1024
-REG_FUNC_MUX_CTRL_9:		/* 32 bits */
-	.word 0xfffe1028
-REG_FUNC_MUX_CTRL_A:		/* 32 bits */
-	.word 0xfffe102C
-REG_FUNC_MUX_CTRL_B:		/* 32 bits */
-	.word 0xfffe1030
-REG_FUNC_MUX_CTRL_C:		/* 32 bits */
-	.word 0xfffe1034
-REG_FUNC_MUX_CTRL_D:		/* 32 bits */
-	.word 0xfffe1038
-REG_PULL_DWN_CTRL_0:		/* 32 bits */
-	.word 0xfffe1040
-REG_PULL_DWN_CTRL_1:		/* 32 bits */
-	.word 0xfffe1044
-REG_PULL_DWN_CTRL_2:		/* 32 bits */
-	.word 0xfffe1048
-REG_PULL_DWN_CTRL_3:		/* 32 bits */
-	.word 0xfffe104c
-REG_VOLTAGE_CTRL_0:		/* 32 bits */
-	.word 0xfffe1060
-REG_TEST_DBG_CTRL_0:		/* 32 bits */
-	.word 0xfffe1070
-REG_MOD_CONF_CTRL_0:		/* 32 bits */
-	.word 0xfffe1080
-REG_TC_IMIF_PRIO:		/* 32 bits */
-	.word 0xfffecc00
-REG_TC_EMIFS_PRIO:		/* 32 bits */
-	.word 0xfffecc04
-REG_TC_EMIFF_PRIO:		/* 32 bits */
-	.word 0xfffecc08
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
-	.word 0xfffecc20
-REG_TC_EMIFF_MRS:		/* 32 bits */
-	.word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-/* identification code register */
-REG_IDCODE:			/* 32 bits */
-	.word 0xfffed404
-
-/* Innovator specific */
-REG_FPGA_LED_DIGIT:		/* 8 bits (not used on Innovator) */
-	.word 0x08000003
-REG_FPGA_POWER:			/* 8 bits */
-	.word 0x08000005
-REG_FPGA_AUDIO:			/* 8 bits (not used on Innovator) */
-	.word 0x0800000c
-REG_FPGA_DIP_SWITCH:		/* 8 bits (not used on Innovator) */
-	.word 0x0800000e
-
-VAL_COMP_MODE_CTRL_0:
-	.word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
-	.word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_8:
-	.word 0x10001200
-VAL_FUNC_MUX_CTRL_9:
-	.word 0x01201012
-VAL_FUNC_MUX_CTRL_A:
-	.word 0x00000248
-VAL_FUNC_MUX_CTRL_B:
-	.word 0x00000248
-VAL_FUNC_MUX_CTRL_C:
-	.word 0x09000000
-VAL_FUNC_MUX_CTRL_D:
-	.word 0x00000000
-VAL_PULL_DWN_CTRL_0:
-	.word 0x11a10000
-VAL_PULL_DWN_CTRL_1:
-	.word 0x2e047fff
-VAL_PULL_DWN_CTRL_2:
-	.word 0xffd603a6
-VAL_PULL_DWN_CTRL_3:
-	.word 0x00003e03
-VAL_VOLTAGE_CTRL_0:
-	.word 0x00000007
-VAL_TEST_DBG_CTRL_0:
-	/*  See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
-	 *   This slows down internal SRAM accesses.
-	 */
-	.word 0x00000007
-VAL_MOD_CONF_CTRL_0:
-	.word 0x0b000008
-VAL_ARM_CKCTL:
-	.word 0x010f
-VAL_DPLL1_CTL:
-	.word 0x2710
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
-	.word 0x00001149
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
-	.word 0x00004158
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x002130b0
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x0000f559
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x000055f0
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00003331
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x010290fc
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027
diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c
deleted file mode 100644
index 8941209510..0000000000
--- a/board/omap1510inn/omap1510innovator.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-			  "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* arch number of OMAP 1510-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit.  However to make it
- *  work, you need make sure your kernel startup flush bug is fixed.
- *  ... rkw ...
- */
-	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-	/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
-	/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
-	/* setup gpio direction to match board (no floats!) */
-	/**gdir = 0xCFF9; */
-	/**mdir = 0x103F; */
-
-	return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
-	{
-		unsigned int regval;
-
-		regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
-		regval = regval | 0x0001;	/* Turn off write protection for flash devices. */
-		if (regval & 0x0002) {
-			regval = regval & 0xfffd;	/* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
-			/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
-			/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
-			/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
-		}
-		*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-	}
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
-	/* take the Ethernet controller out of reset and wait
-	 * for the EEPROM load to complete.
-	 */
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (3);
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
diff --git a/board/omap1510inn/u-boot.lds b/board/omap1510inn/u-boot.lds
deleted file mode 100644
index b6d16190fc..0000000000
--- a/board/omap1510inn/u-boot.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm925t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/omap5912osk/Makefile b/board/omap5912osk/Makefile
deleted file mode 100644
index 8e14c699d3..0000000000
--- a/board/omap5912osk/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= omap5912osk.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/omap5912osk/config.mk b/board/omap5912osk/config.mk
deleted file mode 100644
index 037579613f..0000000000
--- a/board/omap5912osk/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2002-2004
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-# Rishi Bhattacharya <rishi@ti.com>
-#
-# TI OSK board with OMAP5912 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# OSK has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-
-TEXT_BASE = 0x11080000
diff --git a/board/omap5912osk/lowlevel_init.S b/board/omap5912osk/lowlevel_init.S
deleted file mode 100644
index a1fa097d9e..0000000000
--- a/board/omap5912osk/lowlevel_init.S
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1610)
-#include <./configs/omap1510.h>
-#endif
-
-
-_TEXT_BASE:
-	.word	TEXT_BASE	/* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*------------------------------------------------------*
-	 * Ensure i-cache is enabled                            *
-	 * To configure TC regs without fetching instruction    *
-	 *------------------------------------------------------*/
-	mrc	p15, 0, r0, c1, c0
-	orr	r0, r0, #0x1000
-	mcr	p15, 0, r0, c1, c0
-
-	/*------------------------------------------------------*
-	 *mask all IRQs by setting all bits in the INTMR default*
-	 *------------------------------------------------------*/
-	mov	r1, #0xffffffff
-	ldr	r0, =REG_IHL1_MIR
-	str	r1, [r0]
-	ldr	r0, =REG_IHL2_MIR
-	str	r1, [r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT1)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT1
-	ldr	r1,	VAL_ARM_IDLECT1
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT2
-	ldr	r1,	VAL_ARM_IDLECT2
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT3
-	ldr	r1,	VAL_ARM_IDLECT3
-	str	r1,	[r0]
-
-	mov	r1,	#0x01               /* PER_EN bit */
-	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]            /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable */
-	mov	r1,	#0x1000
-	ldr	r0,	REG_ARM_SYSST
-
-	mov	r2,	#0
-1:	cmp	r2,	#1
-	streqh	r1,	[r0]
-	add	r2,	r2,	#1
-	cmp	r2,	#0x100              /* wait for any bubbles to finish */
-	bne	1b
-
-	ldr	r1,	VAL_ARM_CKCTL
-	ldr	r0,	REG_ARM_CKCTL
-	strh	r1,	[r0]
-
-	/* a few nops to let settle */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	/* setup DPLL 1 */
-	/* Ramp up the clock to 96Mhz */
-	ldr	r1,	VAL_DPLL1_CTL
-	ldr	r0,	REG_DPLL1_CTL
-	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10       /* Check if PLL is enabled. */
-	beq	lock_end                /* Do not look for lock if BYPASS selected */
-2:
-	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01       /* Check the LOCK bit.*/
-	beq 2b                      /* loop until bit goes hi. */
-lock_end:
-
-	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...                 *
- 	 *------------------------------------------------------*/
-	ldr	r0,	REG_WATCHDOG
-	ldr	r1,	WATCHDOG_VAL1
-	str	r1,	[r0]
-	ldr	r1,	WATCHDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL1
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-
-watch1Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch1Wait
-
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-watch2Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch2Wait
-
-	/* Set memory timings corresponding to the new clock speed */
-	ldr	r3, VAL_SDRAM_CONFIG_SDF0
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov	r0,	#0x10000000         /* Load physical SDRAM base. */
-	mov	r1,	pc                  /* Get current execution location. */
-	cmp	r1,	r0                  /* Compare. */
-	bge	skip_sdram              /* Skip over EMIF-fast initialization if running from SDRAM. */
-
-	/* identify the device revision, -- TMX or TMP(TMS) */
-	ldr	r0, REG_DEVICE_ID
-	ldr	r1, [r0]
-
-	ldr	r0, VAL_DEVICE_ID_TMP
-	mov	r1, r1, lsl #15
-	mov	r1, r1, lsr #16
-	cmp	r0, r1
-	bne	skip_TMP_Patch
-
-	/* Enable TMP/TMS device new features */
-	mov	r0, #1
-	ldr	r1, REG_TC_EMIFF_DOUBLER
-	str	r0, [r1]
-
-	/* Enable new ac parameters */
-	mov	r0, #0x0b
-	ldr	r1, REG_SDRAM_CONFIG2
-	str	r0, [r1]
-
-	ldr	r3, VAL_SDRAM_CONFIG_SDF1
-
-skip_TMP_Patch:
-
-	/*
-	* Delay for SDRAM initialization.
-	*/
-	mov	r0,	#0x1800		/* value should be checked */
-3:
-	subs	r0,	r0,	#0x1	/* Decrement count */
-	bne 	3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-
-	/* mobile ddr operation */
-	ldr	r0,	REG_SDRAM_OPERATION
-	mov	r2,	#07
-	str	r2,	[r0]
-
-	/* config register */
-	ldr	r0,	REG_SDRAM_CONFIG
-	str	r3,	[r0]
-
-	/* manual command register */
-	ldr	r0,	REG_SDRAM_MANUAL_CMD
-
-	/* issue set cke high */
-	mov	r1,	#CMD_SDRAM_CKE_SET_HIGH
-	str	r1,	[r0]
-
-	/* issue nop */
-	mov	r1,	#CMD_SDRAM_NOP
-	str	r1,	[r0]
-
-	mov	r2,	#0x0100
-waitMDDR1:
-	subs	r2,	r2,	 #1
-	bne	waitMDDR1	/* delay loop */
-
-	/* issue precharge */
-	mov	r1,	#CMD_SDRAM_PRECHARGE
-	str	r1,	[r0]
-
-	/* issue autorefresh x 2 */
-	mov	r1,	#CMD_SDRAM_AUTOREFRESH
-	str	r1,	[r0]
-	str	r1,	[r0]
-
-	/* mrs register ddr mobile */
-	ldr	r0,	REG_SDRAM_MRS
-	mov	r1,	#0x33
-	str	r1,	[r0]
-
-	/* emrs1 low-power register */
-	ldr	r0,	REG_SDRAM_EMRS1
-	/* self refresh on all banks */
-	mov	r1,	#0
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_URD_CONTROL
-	ldr	r1,	DLL_URD_CONTROL_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_LRD_CONTROL
-	ldr	r1,	DLL_LRD_CONTROL_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_WRT_CONTROL
-	ldr	r1,	DLL_WRT_CONTROL_VAL
-	str	r1,	[r0]
-
-	/* delay loop */
-	mov	r0,	#0x0100
-waitMDDR2:
-	subs	r0,	r0,	#1
-	bne	waitMDDR2
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov	r0,	#0x1800
-4:
-	subs	r0,	r0,	#1	/* Decrement count. */
-	bne	4b
-	b	common_tc
-
-skip_sdram:
-	ldr	r0,	REG_SDRAM_CONFIG
-	str	r3,	[r0]
-
-common_tc:
-	/* slow interface */
-	ldr	r1,	VAL_TC_EMIFS_CS0_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS0_CONFIG
-	str	r1,	[r0] /* Chip Select 0 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
-	str	r1,	[r0] /* Chip Select 1 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
-	str	r1,	[r0] /* Chip Select 3 */
-
-	ldr	r1,	VAL_TC_EMIFS_DWS
-	ldr	r0,	REG_TC_EMIFS_DWS
-	str	r1,	[r0] /* Enable EMIFS.RDY for CS1 (ether) */
-
-#ifdef CONFIG_H2_OMAP1610
-	/* inserting additional 2 clock cycle hold time for LAN */
-	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
-	ldr    	r1,     VAL_TC_EMIFS_CS1_ADVANCED
-	str     r1,     [r0]
-#endif
-	/* Start MPU Timer 1 */
-	ldr	r0,	REG_MPU_LOAD_TIMER
-	ldr	r1,	VAL_MPU_LOAD_TIMER
-	str	r1,	[r0]
-
-	ldr	r0,	REG_MPU_CNTL_TIMER
-	ldr	r1,	VAL_MPU_CNTL_TIMER
-	str	r1,	[r0]
-
-	/* back to arch calling code */
-	mov	pc,	lr
-
-	/* the literal pools origin */
-	.ltorg
-
-REG_DEVICE_ID:			/* 32 bits */
-	.word 0xfffe2004
-REG_TC_EMIFS_CONFIG:
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFS_DWS:		/* 32 bits */
-	.word 0xfffecc40
-#ifdef CONFIG_H2_OMAP1610
-REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
-	.word 0xfffecc54
-#endif
-
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT3:		/* 16 bits */
-	.word 0xfffece24
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_IDLECT1:		/* 16 bits */
-	.word 0xfffece04
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-
-/* Watch Dog register */
-/* secure watchdog stop */
-REG_WSPRDOG:
-	.word 0xfffeb048
-/* watchdog write pending */
-REG_WWPSDOG:
-	.word 0xfffeb034
-
-WSPRDOG_VAL1:
-	.word 0x0000aaaa
-WSPRDOG_VAL2:
-	.word 0x00005555
-
-/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
- counter @8192 rows, 10 ns, 8 burst */
-REG_SDRAM_CONFIG:
-	.word 0xfffecc20
-REG_SDRAM_CONFIG2:
-	.word 0xfffecc3c
-REG_TC_EMIFF_DOUBLER:		/* 32 bits */
-	.word 0xfffecc60
-
-/* Operation register */
-REG_SDRAM_OPERATION:
-	.word 0xfffecc80
-
-/* Manual command register */
-REG_SDRAM_MANUAL_CMD:
-	.word 0xfffecc84
-
-/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
-REG_SDRAM_MRS:
-	.word 0xfffecc70
-
-/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
-REG_SDRAM_EMRS1:
-	.word 0xfffecc78
-
-/* WRT DLL register */
-REG_DLL_WRT_CONTROL:
-	.word 0xfffecc68
-DLL_WRT_CONTROL_VAL:
-	.word 0x03f00002    /* Phase of 72deg, write offset +31  */
-
-/* URD DLL register */
-REG_DLL_URD_CONTROL:
-	.word 0xfffeccc0
-DLL_URD_CONTROL_VAL:
-	.word 0x00800002    /* Phase of 72deg, read offset +31  */
-
-/* LRD DLL register */
-REG_DLL_LRD_CONTROL:
-	.word 0xfffecccc
-DLL_LRD_CONTROL_VAL:
-	.word 0x00800002    /* read offset +31  */
-
-REG_WATCHDOG:
-	.word 0xfffec808
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-REG_MPU_LOAD_TIMER:
-	.word 0xfffec504
-REG_MPU_CNTL_TIMER:
-	.word 0xfffec500
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
-/* 96 MHz Samsung Mobile DDR */
-/* Original setting for TMX device */
-VAL_SDRAM_CONFIG_SDF0:
-    .word 0x0014e6fe
-
-/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
-VAL_SDRAM_CONFIG_SDF1:
-    .word 0x0114e6fe
-
-VAL_ARM_CKCTL:
-	.word 0x2000		/* was:	0x3000, now use CLK_REF for timer input */
-VAL_DPLL1_CTL:
-	.word 0x2830
-
-#ifdef CONFIG_OSK_OMAP5912
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x002130b0
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00001133
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x000055f0
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88013141
-VAL_TC_EMIFS_DWS:	/* Enable EMIFS.RDY for CS1 access (ether) */
-	.word 0x000000c0
-VAL_DEVICE_ID_TMP:	/* TMP/TMS=0xb65f, TMX=0xb58c */
-	.word 0xb65f
-#endif
-
-#ifdef CONFIG_H2_OMAP1610
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x00203331
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x8180fff3
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0xf800f22a
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88013141
-VAL_TC_EMIFS_CS1_ADVANCED:
-	.word 0x00000022
-#endif
-
-VAL_ARM_IDLECT1:
-	.word 0x00000400
-VAL_ARM_IDLECT2:
-	.word 0x00000886
-VAL_ARM_IDLECT3:
-	.word 0x00000015
-
-/* command values */
-.equ CMD_SDRAM_NOP,             0x00000000
-.equ CMD_SDRAM_PRECHARGE,       0x00000001
-.equ CMD_SDRAM_AUTOREFRESH,     0x00000002
-.equ CMD_SDRAM_CKE_SET_HIGH,    0x00000007
diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c
deleted file mode 100644
index 6993b136ee..0000000000
--- a/board/omap5912osk/omap5912osk.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Rishi Bhattacharya <rishi@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#if defined(CONFIG_OMAP1610)
-#include <./configs/omap1510.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void flash__init (void);
-void ether__init (void);
-void set_muxconf_regs (void);
-void peripheral_power_enable (void);
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-	/* Configure MUX settings */
-	set_muxconf_regs ();
-	peripheral_power_enable ();
-
-/* this speeds up your boot a quite a bit.  However to make it
- *  work, you need make sure your kernel startup flush bug is fixed.
- *  ... rkw ...
- */
-	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-	/* currently empty */
-	return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-	unsigned int regval;
-	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
-	/* Turn off write protection for flash devices. */
-	regval = regval | 0x0001;
-	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0480000b
-	int i;
-
-	*((volatile unsigned short *) 0xfffece08) = 0x03FF;
-	*((volatile unsigned short *) 0xfffb3824) = 0x8000;
-	*((volatile unsigned short *) 0xfffb3830) = 0x0000;
-	*((volatile unsigned short *) 0xfffb3834) = 0x0009;
-	*((volatile unsigned short *) 0xfffb3838) = 0x0009;
-	*((volatile unsigned short *) 0xfffb3818) = 0x0002;
-	*((volatile unsigned short *) 0xfffb382C) = 0x0048;
-	*((volatile unsigned short *) 0xfffb3824) = 0x8603;
-	udelay (3);
-	for (i=0;i<2000;i++);
-	*((volatile unsigned short *) 0xfffb381C) = 0x6610;
-	udelay (30);
-	for (i=0;i<10000;i++);
-
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (3);
-
-
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-/******************************************************
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers
-			  specific to the hardware
-*******************************************************/
-void set_muxconf_regs (void)
-{
-	volatile unsigned int *MuxConfReg;
-	/* set each registers to its reset value; */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
-	/* setup for UART1 */
-	*MuxConfReg &= ~(0x02000000);	/* bit 25 */
-	/* setup for UART2 */
-	*MuxConfReg &= ~(0x01000000);	/* bit 24 */
-	/* Disable Uwire CS Hi-Z */
-	*MuxConfReg |= 0x08000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
-	/*setup mux for UART3 */
-	*MuxConfReg |= 0x00000001;	/* bit3, 1, 0 (mux0 5,5,26) */
-	*MuxConfReg &= ~0x0000003e;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
-	/* Disable Uwire CS Hi-Z */
-	*MuxConfReg |= 0x00001200;	/*bit 9 for CS0 12 for CS3 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
-	/*  Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the  */
-	/*  hardware will actually use TX and RTS based on bit 25 in  */
-	/*  FUNC_MUX_CTRL_0.  I told you this thing was screwy!	 */
-	*MuxConfReg |= 0x00201000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
-	/* setup for UART2 */
-	/*  Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the  */
-	/*  hardware will actually use TX and RTS based on bit 24 in  */
-	/*  FUNC_MUX_CTRL_0. */
-	*MuxConfReg |= 0x09000000;
-	MuxConfReg =
-	(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D);
-	*MuxConfReg |= 0x00000020;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
-	*MuxConfReg = 0x00000000;
-	/* mux setup for SD/MMC driver */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
-	*MuxConfReg &= 0xFFFE0FFF;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	/* bit 13 for MMC2 XOR_CLK */
-	*MuxConfReg &= ~(0x00002000);
-	/* bit 29 for UART 1 */
-	*MuxConfReg &= ~(0x00002000);
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
-	/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
-	*MuxConfReg |= 0x000C0000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
-	*MuxConfReg &= ~(0x00000070);
-	*MuxConfReg &= ~(0x00000008);
-	*MuxConfReg |= 0x00000003;
-	*MuxConfReg |= 0x00000180;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	/* bit 17, software controls VBUS */
-	*MuxConfReg &= ~(0x00020000);
-	/* Enable USB 48 and 12M clocks */
-	*MuxConfReg |= 0x00000200;
-	*MuxConfReg &= ~(0x00000180);
-	/*2.75V for MMCSDIO1 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
-	*MuxConfReg = 0x00001FE7;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
-	*MuxConfReg = 0x00000000;
-	/* Turn on UART2 48 MHZ clock */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	*MuxConfReg |= 0x40000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
-	/* setup for USB VBus detection OMAP161x */
-	*MuxConfReg |= 0x00040000;	/* bit 18 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
-	/* PullUps for SD/MMC driver */
-	*MuxConfReg |= ~(0xFFFE0FFF);
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
-	*MuxConfReg = COMP_MODE_ENABLE;
-}
-
-/******************************************************
- Routine: peripheral_power_enable
- Description: Enable the power for UART1
-*******************************************************/
-void peripheral_power_enable (void)
-{
-#define UART1_48MHZ_ENABLE	((unsigned short)0x0200)
-#define SW_CLOCK_REQUEST	((volatile unsigned short *)0xFFFE0834)
-
-	*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	puts("Board: OSK5912");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
diff --git a/board/omap5912osk/u-boot.lds b/board/omap5912osk/u-boot.lds
deleted file mode 100644
index 142450cdd5..0000000000
--- a/board/omap5912osk/u-boot.lds
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-	. = ALIGN(4);
-	.text	:
-	{
-	  cpu/arm926ejs/start.o	(.text)
-	  *(.text)
-	}
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-	. = ALIGN(4);
-	.data : { *(.data) }
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/pm854/Makefile b/board/pm854/Makefile
deleted file mode 100644
index 29136508f5..0000000000
--- a/board/pm854/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/pm854/config.mk b/board/pm854/config.mk
deleted file mode 100644
index 7d58d6ec85..0000000000
--- a/board/pm854/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,Motorola Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# pm854 board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 0.5MB
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/pm854/init.S b/board/pm854/init.S
deleted file mode 100644
index ade5d6e5b6..0000000000
--- a/board/pm854/init.S
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	64M	Non-cacheable, guarded
-	 * 0xfc000000	64M	FLASH (8,16,32 or 64 MB)
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 7:	256M	DDR
-	 * 0x00000000	256M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-#endif
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     BCSR                    1M
- * 0xfc00_0000     0xffff_ffff     FLASH (boot bank)       64M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-	.long 0x05
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4
-	entry_end
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
deleted file mode 100644
index 6ead1d0630..0000000000
--- a/board/pm854/pm854.c
+++ /dev/null
@@ -1,294 +0,0 @@
- /*
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <spd.h>
-
-#if defined(CONFIG_DDR_ECC)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
-
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
-
-    pci->peer &= 0xffffffdf; /* disable master abort */
-#endif
-
-    return 0;
-}
-
-int checkboard (void)
-{
-	puts("Board: MicroSys PM854\n");
-
-#ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
-	       CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf("    PCI1: disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init();
-
-	return 0;
-}
-
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
-	    int i,x;
-
-	    x = 10;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    gur->ddrdllcr = 0x81000000;
-	    asm("sync;isync;msync");
-	    udelay (200);
-	    while (gur->ddrdllcr != 0x81000100)
-	    {
-	    	gur->devdisr = gur->devdisr | 0x00010000;
-		asm("sync;isync;msync");
-		for (i=0; i<x; i++)
-		    ;
-		gur->devdisr = gur->devdisr & 0xfff7ffff;
-		asm("sync;isync;msync");
-		x++;
-	    }
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-  #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_pm854_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_pm854_config_table,
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
diff --git a/board/pm854/u-boot.lds b/board/pm854/u-boot.lds
deleted file mode 100644
index fbfc65a1e8..0000000000
--- a/board/pm854/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/pm854/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/pm854/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/pm856/Makefile b/board/pm856/Makefile
deleted file mode 100644
index 29136508f5..0000000000
--- a/board/pm856/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/pm856/config.mk b/board/pm856/config.mk
deleted file mode 100644
index 1f98b3379c..0000000000
--- a/board/pm856/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,2003 Motorola Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# PM856 board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 0.5MB
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/pm856/init.S b/board/pm856/init.S
deleted file mode 100644
index ade5d6e5b6..0000000000
--- a/board/pm856/init.S
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	64M	Non-cacheable, guarded
-	 * 0xfc000000	64M	FLASH (8,16,32 or 64 MB)
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 7:	256M	DDR
-	 * 0x00000000	256M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-#endif
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     BCSR                    1M
- * 0xfc00_0000     0xffff_ffff     FLASH (boot bank)       64M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-	.long 0x05
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4
-	entry_end
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
deleted file mode 100644
index a10075451e..0000000000
--- a/board/pm856/pm856.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <miiphy.h>
-
-#if defined(CONFIG_DDR_ECC)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-long int fixed_sdram(void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   0,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   0,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   0,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   1,   0,   0,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   0,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   1,   1,   0,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-
-int board_early_init_f (void)
-{
-    return 0;
-}
-
-void reset_phy (void)
-{
-}
-
-
-int checkboard (void)
-{
-	puts("Board: MicroSys PM856\n");
-
-#ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
-	       CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf("    PCI1: disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init();
-
-	return 0;
-}
-
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
-	    int i,x;
-
-	    x = 10;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    gur->ddrdllcr = 0x81000000;
-	    asm("sync;isync;msync");
-	    udelay (200);
-	    while (gur->ddrdllcr != 0x81000100)
-	    {
-	    	gur->devdisr = gur->devdisr | 0x00010000;
-		asm("sync;isync;msync");
-		for (i=0; i<x; i++)
-		    ;
-		gur->devdisr = gur->devdisr & 0xfff7ffff;
-		asm("sync;isync;msync");
-		x++;
-	    }
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-  #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
diff --git a/board/pm856/u-boot.lds b/board/pm856/u-boot.lds
deleted file mode 100644
index e946a8e512..0000000000
--- a/board/pm856/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2005 Wolfgang Denk <wd@denx.de>
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/pm856/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/pm856/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/pn62/Makefile b/board/pn62/Makefile
deleted file mode 100644
index eb88898e71..0000000000
--- a/board/pn62/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o cmd_pn62.o misc.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
deleted file mode 100644
index 3ea068d352..0000000000
--- a/board/pn62/cmd_pn62.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <command.h>
-#include "pn62.h"
-
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-
-/*
- * Command led: controls the various LEDs 0..11 on the PN62 card.
- */
-int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-    unsigned int number, function;
-
-    if (argc != 3) {
-	printf ("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-    }
-    number = simple_strtoul(argv[1], NULL, 10);
-    if (number > PN62_LED_MAX)
-	return 1;
-    function = simple_strtoul(argv[2], NULL, 16);
-    set_led (number, function);
-    return 0;
-}
-U_BOOT_CMD(
-	led    ,	3,	1,	do_led,
-	"led     - set LED 0..11 on the PN62 board\n",
-	"i fun\n"
-	"    - set 'i'th LED to function 'fun'\n"
-);
-
-/*
- * Command loadpci: loads a image over PCI.
- */
-#define CMD_MOVE_WINDOW 0x1
-#define CMD_BOOT_IMAGE  0x2
-
-int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-    char *s;
-    ulong addr = 0, count = 0;
-    u32 off;
-    int cmd, rcode = 0;
-
-    /* pre-set load_addr */
-    if ((s = getenv("loadaddr")) != NULL) {
-	addr = simple_strtoul(s, NULL, 16);
-    }
-
-    switch (argc) {
-    case 1:
-	break;
-    case 2:
-	addr = simple_strtoul(argv[1], NULL, 16);
-	break;
-    default:
-       printf ("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-    }
-
-    printf ("## Ready for image download ...\n");
-
-    show_startup_phase(12);
-
-    while (1) {
-	/* Alive indicator */
-	i2155x_write_scrapad(BOOT_PROTO, BOOT_PROTO_READY);
-
-	/* Toggle status LEDs */
-	cmd = (count / 200) % 4; /* downscale */
-	set_led(4, cmd == 0 ? LED_1 : LED_0);
-	set_led(5, cmd == 1 ? LED_1 : LED_0);
-	set_led(6, cmd == 2 ? LED_1 : LED_0);
-	set_led(7, cmd == 3 ? LED_1 : LED_0);
-	udelay(1000);
-	count++;
-
-	cmd = i2155x_read_scrapad(BOOT_CMD);
-
-	if (cmd == BOOT_CMD_MOVE) {
-	    off = i2155x_read_scrapad(BOOT_DATA);
-	    off += addr;
-	    i2155x_set_bar_base(3, off);
-	    printf ("## BAR3 Addr moved = 0x%08x\n", off);
-	    i2155x_write_scrapad(BOOT_CMD, ~cmd);
-	    show_startup_phase(13);
-	}
-	else if (cmd == BOOT_CMD_BOOT) {
-	    set_led(4, LED_1);
-	    set_led(5, LED_1);
-	    set_led(6, LED_1);
-	    set_led(7, LED_1);
-
-	    i2155x_write_scrapad(BOOT_CMD, ~cmd);
-	    show_startup_phase(14);
-	    break;
-	}
-
-	/* Abort if ctrl-c was pressed */
-	if (ctrlc()) {
-	    printf("\nAbort\n");
-	    return 0;
-	}
-
-    }
-
-    /* Repoint to the default shared memory */
-    i2155x_set_bar_base(3, PN62_SMEM_DEFAULT);
-
-    load_addr = addr;
-    printf ("## Start Addr      = 0x%08lx\n", addr);
-
-    show_startup_phase(15);
-
-    /* Loading ok, check if we should attempt an auto-start */
-    if (((s = getenv("autostart")) != NULL) && (strcmp(s,"yes") == 0)) {
-	char *local_args[2];
-	local_args[0] = argv[0];
-	local_args[1] = NULL;
-
-	printf ("Automatic boot of image at addr 0x%08lX ...\n",
-		load_addr);
-	rcode = do_bootm (cmdtp, 0, 1, local_args);
-    }
-
-#ifdef CONFIG_AUTOSCRIPT
-    if (load_addr) {
-	char *s;
-
-	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-	    printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
-	    rcode = autoscript (bd, load_addr);
-	}
-    }
-#endif
-    return rcode;
-}
-
-U_BOOT_CMD(
-	loadpci,	2,	1,	do_loadpci,
-	"loadpci - load binary file over PCI\n",
-	"[addr]\n"
-	"    - load binary file over PCI to address 'addr'\n"
-);
-
-#endif
diff --git a/board/pn62/config.mk b/board/pn62/config.mk
deleted file mode 100644
index a2b6f059ab..0000000000
--- a/board/pn62/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# PN62 boards
-#
-
-TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/pn62/misc.c b/board/pn62/misc.c
deleted file mode 100644
index dcb2db5a9f..0000000000
--- a/board/pn62/misc.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#include "pn62.h"
-
-typedef struct {
-    pci_dev_t    devno;
-    volatile u32 *csr;
-
-} i2155x_t;
-
-static i2155x_t i2155x = { 0, NULL };
-
-static struct pci_device_id i2155x_ids[] = {
-    { 0x1011, 0x0046 },		/* i21554 */
-    { 0x8086, 0xb555 }		/* i21555 */
-};
-
-int i2155x_init(void)
-{
-    pci_dev_t devno;
-    u32 val;
-    int i;
-
-    /*
-     * Find the Intel bridge.
-     */
-    if ((devno = pci_find_devices(i2155x_ids, 0)) < 0) {
-	printf("Error: Intel bridge 2155x not found!\n");
-	return -1;
-    }
-    i2155x.devno = devno;
-
-    /*
-     * Get auto-configured base address for CSR access.
-     */
-    pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &val);
-    if (val & PCI_BASE_ADDRESS_SPACE_IO) {
-	val &= PCI_BASE_ADDRESS_IO_MASK;
-	i2155x.csr = (volatile u32 *)(_IO_BASE + val);
-    } else {
-	val &= PCI_BASE_ADDRESS_MEM_MASK;
-	i2155x.csr =  (volatile u32 *)val;
-    }
-
-    /*
-     * Translate downstream memory 2 (bar3) to base of shared memory.
-     */
-    i2155x_set_bar_base(3, PN62_SMEM_DEFAULT);
-
-    /*
-     * Enable memory space, I/O space and bus master bits
-     * in both Primary and Secondary command registers.
-     */
-    val = PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_IO;
-    pci_write_config_word(devno, 0x44, val);
-    pci_write_config_word(devno, 0x04, val);
-
-    /*
-     * Clear scratchpad registers.
-     */
-    for (i = 0; i < (I2155X_SCRAPAD_MAX - 1); i++) {
-	i2155x_write_scrapad(i, 0x0);
-    }
-
-    /*
-     * Set interrupt line for Linux.
-     */
-    pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 3);
-
-    return 0;
-}
-
-/*
- * Access the Scratchpad registers 0..7 of the Intel bridge.
- */
-void i2155x_write_scrapad(int idx, u32 val)
-{
-    if (idx >= 0 && idx < I2155X_SCRAPAD_MAX)
-	out_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx, val);
-    else
-	printf("i2155x_write_scrapad: invalid index\n");
-}
-
-u32 i2155x_read_scrapad(int idx)
-{
-    if (idx >= 0 && idx < I2155X_SCRAPAD_MAX)
-	return in_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx);
-    else
-	printf("i2155x_read_scrapad: invalid index\n");
-    return -1;
-}
-
-void i2155x_set_bar_base(int bar, u32 base)
-{
-    if (bar >= 2 && bar <= 4) {
-	pci_write_config_dword(i2155x.devno,
-			       I2155X_BAR2_BASE + (bar - 2) * 4,
-			       base);
-    }
-}
-
-/*
- * Read Vital Product Data (VPD) from the Serial EPROM attached
- * to the Intel bridge.
- */
-int i2155x_read_vpd(int offset, int size, unsigned char *data)
-{
-    int i, n;
-    u16 val16;
-
-    for (i = 0; i < size; i++) {
-	pci_write_config_word(i2155x.devno, I2155X_VPD_ADDR,
-			      offset + i - I2155X_VPD_START);
-	for (n = 10000; n > 0; n--) {
-	    pci_read_config_word(i2155x.devno, I2155X_VPD_ADDR, &val16);
-	    if ((val16 & 0x8000) != 0) /* wait for completion */
-		break;
-	    udelay(100);
-	}
-	if (n == 0) {
-	    printf("i2155x_read_vpd: TIMEOUT\n");
-	    return -1;
-	}
-
-	pci_read_config_byte(i2155x.devno, I2155X_VPD_DATA, &data[i]);
-    }
-
-    return i;
-}
-
-static struct pci_device_id am79c95x_ids [] = {
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
-	{ }
-};
-
-
-/*
- * Initialize the AMD ethernet controllers.
- */
-int am79c95x_init(void)
-{
-    pci_dev_t devno;
-    int i;
-
-    /*
-     * Set interrupt line for Linux.
-     */
-    for (i = 0; i < 2; i++) {
-	if ((devno = pci_find_devices(am79c95x_ids, i)) < 0)
-	    break;
-	pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 2+i);
-    }
-    if (i < 2)
-	printf("Error: Only %d AMD Ethernet Controller found!\n", i);
-
-    return 0;
-}
-
-
-void set_led(unsigned int number, unsigned int function)
-{
-    volatile u8 *addr;
-
-    if ((number >= 0) && (number < PN62_LED_MAX) &&
-	(function >= 0) && (function <= LED_LAST_FUNCTION)) {
-	addr = (volatile u8 *)(PN62_LED_BASE + number * 8);
-	out_8(addr, function&0xff);
-    }
-}
-
-/*
- * Show fatal error indicated by Kinght Rider(tm) effect
- * in LEDS 0-7. LEDS 8-11 contain 4 bit error code.
- * Note: this function will not terminate.
- */
-void fatal_error(unsigned int error_code)
-{
-    int i, d;
-
-    for (i = 0; i < 12; i++) {
-	set_led(i, LED_0);
-    }
-
-    /*
-     * Write error code.
-     */
-    set_led(8,  (error_code & 0x01) ? LED_1 : LED_0);
-    set_led(9,  (error_code & 0x02) ? LED_1 : LED_0);
-    set_led(10, (error_code & 0x04) ? LED_1 : LED_0);
-    set_led(11, (error_code & 0x08) ? LED_1 : LED_0);
-
-    /*
-     * Yay - Knight Rider effect!
-     */
-    while(1) {
-	unsigned int delay = 2000;
-
-	for (i = 0; i < 8; i++) {
-	    set_led(i, LED_1);
-	    for (d = 0; d < delay; d++);
-	    set_led(i, LED_0);
-	}
-
-	for (i = 7; i > 0; i--) {
-	    set_led(i, LED_1);
-	    for (d = 0; d < delay; d++);
-	    set_led(i, LED_0);
-	}
-    }
-}
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
deleted file mode 100644
index b2f348d4d6..0000000000
--- a/board/pn62/pn62.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-
-#include "pn62.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int get_serial_number (char *string, int size);
-static int get_mac_address (int id, u8 * mac, char *string, int size);
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress (int phase)
-{
-	/*
-	 * Show phases of the bootm command on the front panel
-	 * LEDs and the scratchpad register #3 as well. We use
-	 * blinking LEDs for logical "1".
-	 */
-	if (phase > 0) {
-		set_led (8, (phase & 0x1) ? LED_SLOW_CLOCK : LED_0);
-		set_led (9, (phase & 0x2) ? LED_SLOW_CLOCK : LED_0);
-		set_led (10, (phase & 0x4) ? LED_SLOW_CLOCK : LED_0);
-		set_led (11, (phase & 0x8) ? LED_SLOW_CLOCK : LED_0);
-	}
-	i2155x_write_scrapad (BOOT_STATUS, phase);
-	if (phase < 0)
-		i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR);
-}
-#endif
-
-void show_startup_phase (int phase)
-{
-	/*
-	 * Show the phase of U-Boot startup on the front panel
-	 * LEDs and the scratchpad register #3 as well.
-	 */
-	if (phase > 0) {
-		set_led (8, (phase & 0x1) ? LED_1 : LED_0);
-		set_led (9, (phase & 0x2) ? LED_1 : LED_0);
-		set_led (10, (phase & 0x4) ? LED_1 : LED_0);
-		set_led (11, (phase & 0x8) ? LED_1 : LED_0);
-	}
-	i2155x_write_scrapad (BOOT_STATUS, phase);
-	if (phase < 0)
-		i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR);
-}
-
-int checkboard (void)
-{
-	show_startup_phase (1);
-	puts ("Board: PN62\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	long size;
-	long new_bank0_end;
-	long mear1;
-	long emear1;
-
-	show_startup_phase (2);
-
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
-
-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg (MEAR1);
-	emear1 = mpc824x_mpc107_getreg (EMEAR1);
-	mear1 = (mear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg (MEAR1, mear1);
-	mpc824x_mpc107_setreg (EMEAR1, emear1);
-
-	return (size);
-}
-
-/*
- * Initialize PCI Devices. We rely on auto-configuration.
- */
-#ifndef CONFIG_PCI_PNP
-#error "CONFIG_PCI_PNP is not defined, please correct!"
-#endif
-
-struct pci_controller hose = {
-};
-
-void pci_init_board (void)
-{
-	show_startup_phase (4);
-	pci_mpc824x_init (&hose);
-
-	show_startup_phase (5);
-	i2155x_init ();
-	show_startup_phase (6);
-	am79c95x_init ();
-	show_startup_phase (7);
-}
-
-int misc_init_r (void)
-{
-	char str[20];
-	u8 mac[6];
-
-	show_startup_phase (8);
-	/*
-	 * Get serial number and ethernet addresses if not already defined
-	 * and update the board info structure and the environment.
-	 */
-	if (getenv ("serial#") == NULL &&
-		get_serial_number (str, strlen (str)) > 0) {
-		setenv ("serial#", str);
-	}
-	show_startup_phase (9);
-
-	if (getenv ("ethaddr") == NULL &&
-		get_mac_address (0, mac, str, sizeof (str)) > 0) {
-		setenv ("ethaddr", str);
-		memcpy (gd->bd->bi_enetaddr, mac, 6);
-	}
-	show_startup_phase (10);
-
-#ifdef CONFIG_HAS_ETH1
-	if (getenv ("eth1addr") == NULL &&
-		get_mac_address (1, mac, str, sizeof (str)) > 0) {
-		setenv ("eth1addr", str);
-		memcpy (gd->bd->bi_enet1addr, mac, 6);
-	}
-#endif /* CONFIG_HAS_ETH1 */
-	show_startup_phase (11);
-
-	/* Tell everybody that U-Boot is up and runnig */
-	i2155x_write_scrapad (0, 0x12345678);
-	return (0);
-}
-
-static int get_serial_number (char *string, int size)
-{
-	int i;
-	char c;
-
-	if (size < I2155X_VPD_SN_SIZE)
-		size = I2155X_VPD_SN_SIZE;
-	for (i = 0; i < (size - 1); i++) {
-		i2155x_read_vpd (I2155X_VPD_SN_START + i, 1, (uchar *)&c);
-		if (c == '\0')
-			break;
-		string[i] = c;
-	}
-	string[i] = '\0';			/* make sure it's terminated */
-
-	return i;
-}
-
-static int get_mac_address (int id, u8 * mac, char *string, int size)
-{
-	if (size < 6 * 3)
-		return -1;
-
-	i2155x_read_vpd (I2155X_VPD_MAC0_START + 6 * id, 6, mac);
-	return sprintf (string, "%02x:%02x:%02x:%02x:%02x:%02x",
-				mac[0], mac[1], mac[2],
-				mac[3], mac[4], mac[5]);
-}
diff --git a/board/pn62/pn62.h b/board/pn62/pn62.h
deleted file mode 100644
index 7bda0ad9d0..0000000000
--- a/board/pn62/pn62.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PN62_H_
-#define _PN62_H_
-
-/*
- * Definitions for the Intel Bridge 21554 or 21555.
- */
-#define I2155X_VPD_ADDR 	0xe6
-#define I2155X_VPD_DATA 	0xe8
-
-#define I2155X_VPD_START	0x80
-#define I2155X_VPD_SN_START	0x80
-#define I2155X_VPD_SN_SIZE	0x10
-#define I2155X_VPD_MAC0_START	0x90
-#define I2155X_VPD_MAC1_START	0x96
-
-#define I2155X_SCRAPAD_ADDR	0xa8
-#define I2155X_SCRAPAD_MAX	8
-
-#define I2155X_BAR2_BASE	0x98
-#define I2155X_BAR3_BASE	0x9c
-#define I2155X_BAR4_BASE	0xa0
-
-#define I2155X_BAR2_SETUP	0xb0
-#define I2155X_BAR3_SETUP	0xb4
-#define I2155X_BAR4_SETUP	0xb8
-
-/*
- * Interrupt request numbers
- */
-#define PN62_IRQ_HOST		0x0
-#define PN62_IRQ_PLX9054	0x1
-#define PN62_IRQ_ETH0		0x2
-#define PN62_IRQ_ETH1		0x3
-#define PN62_IRQ_COM1		0x4
-#define PN62_IRQ_COM2		0x4
-
-/*
- * Miscellaneous definitons.
- */
-#define PN62_SMEM_DEFAULT	0x1f00000
-
-/*
- * Definitions for boot protocol using Scratchpad registers.
- */
-#define BOOT_DONE		0
-#define BOOT_DONE_CLEAR  	  0x00dead00
-#define BOOT_DONE_ERROR  	  0xbad0dead
-#define BOOT_DONE_U_BOOT 	  0x12345678
-#define BOOT_DONE_LINUX   	  0x87654321
-#define BOOT_CMD 		1
-#define BOOT_CMD_MOVE   	  0x1
-#define BOOT_CMD_BOOT		  0x2
-#define BOOT_DATA		2
-#define BOOT_PROTO		3
-#define BOOT_PROTO_READY	  0x23456789
-#define BOOT_PROTO_CLEAR	  0x00000000
-#define BOOT_STATUS		4
-
-/*
- * LED Definitions:
- */
-#define PN62_LED_BASE		0xff800300
-#define PN62_LED_MAX		12
-
-/*
- * LED0 - 7 mounted on top of board, D1 - D8
- * LED8 - 11 upper four LEDs on the front panel of the board.
- */
-#define LED_0			0x00	/* OFF */
-#define LED_1			0x01	/* ON */
-#define LED_SLOW_CLOCK		0x02	/* SLOW 1Hz ish */
-#define LED_nSLOW_CLOCK		0x03	/* inverse of above */
-#define LED_WATCHDOG_OUT	0x06	/* Reset Watchdog level */
-#define LED_WATCHDOG_CLOCK	0x07	/* clock to watchdog */
-
-/*
- * LED's currently setup in AMD79C973 device as the following:
- * LED0 100Mbit
- * LED1 LNKSE
- * LED2 TX Activity
- * LED3 RX Activity
- */
-#define LED_E0_LED0		0x08	/* Ethernet Port 0 LED 0 */
-#define LED_E0_LED1		0x09	/* Ethernet Port 0 LED 1 */
-#define LED_E0_LED2		0x0A	/* Ethernet Port 0 LED 2 */
-#define LED_E0_LED3		0x0B	/* Ethernet Port 0 LED 3 */
-#define LED_E1_LED0		0x0C	/* Ethernet Port 1 LED 0 */
-#define LED_E1_LED1		0x0D	/* Ethernet Port 1 LED 1 */
-#define LED_E1_LED2		0x0E	/* Ethernet Port 1 LED 2 */
-#define LED_E1_LED3		0x0F	/* Ethernet Port 1 LED 3 */
-#define LED_STROBE0		0x10	/* Processor Strobe 0 */
-#define LED_STROBE1		0x11	/* Processor Strobe 1 */
-#define LED_STROBE2		0x12	/* Processor Strobe 2 */
-#define LED_STROBE3		0x13	/* Processor Strobe 3 */
-#define LED_STROBE4		0x14	/* Processor Strobe 4 */
-#define LED_STROBE5		0x15	/* Processor Strobe 5 */
-#define LED_STROBE6		0x16	/* Processor Strobe 6 */
-#define LED_STROBE7		0x17	/* Processor Strobe 7 */
-#define LED_HOST_STROBE0	0x18	/* Host strobe 0 */
-#define LED_HOST_STROBE1	0x19	/* Host strobe 1 */
-#define LED_HOST_STROBE2	0x1A	/* Host strobe 2 */
-#define LED_HOST_STROBE3	0x1B	/* Host strobe 3 */
-#define LED_HOST_STROBE4	0x1C	/* Host strobe 4 */
-#define LED_HOST_STROBE5	0x1D	/* Host strobe 5 */
-#define LED_HOST_STROBE6	0x1E	/* Host strobe 6 */
-#define LED_HOST_STROBE7	0x1F	/* Host strobe 7 */
-#define LED_MPC_INT0		0x20	/* MPC8240 INT 0 */
-#define LED_MPC_INT1		0x21	/* MPC8240 INT 1 */
-#define	LED_MPC_INT2		0x22	/* MPC8240 INT 2 */
-#define	LED_MPC_INT3		0x23	/* MPC8240 INT 3 */
-#define	LED_MPC_INT4		0x24	/* MPC8240 INT 4 */
-#define	LED_UART0_CS		0x25	/* UART 0 Chip Select */
-#define	LED_UART1_CS		0x26	/* UART 1 Chip Select */
-#define	LED_SRAM_CS		0x27	/* SRAM Chip Select */
-#define	LED_SRAM_WR		0x28	/* SRAM WR Signal */
-#define	LED_SRAM_RD		0x29	/* SRAM RD Signal */
-#define	LED_MPC_RCS0		0x2A	/* MPC8240 RCS0 Signal */
-#define	LED_S_PCI_FRAME		0x2B	/* Secondary PCI Frame Signal */
-#define	LED_MPC_CS0		0x2C	/* MPC8240 CS0 Signal */
-#define	LED_HOST_INT		0x2D	/* MPC8240 to Host Interrupt signal */
-#define LED_LAST_FUNCTION	LED_HOST_INT	/* last function */
-
-/*
- * Forward declarations
- */
-int  i2155x_init         (void);
-void i2155x_write_scrapad(int idx, u32 val);
-u32  i2155x_read_scrapad (int idx);
-void i2155x_set_bar_base (int bar, u32 addr);
-int  i2155x_read_vpd     (int offset, int size, unsigned char *data);
-
-int  am79c95x_init	 (void);
-
-void set_led             (unsigned int number, unsigned int function);
-void fatal_error	 (unsigned int error_code);
-void show_startup_phase  (int phase);
-
-
-#endif /* _PN62_H_ */
diff --git a/board/pn62/u-boot.lds b/board/pn62/u-boot.lds
deleted file mode 100644
index eaee3fdefc..0000000000
--- a/board/pn62/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc824x/start.o		(.text)
-    lib_ppc/board.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-	. = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o (.text)
-
-	*(.text)
-
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
deleted file mode 100644
index 00dc180bbd..0000000000
--- a/board/prodrive/alpr/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o fpga.o nand.o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend *~
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
deleted file mode 100644
index 5abc87dde6..0000000000
--- a/board/prodrive/alpr/alpr.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-#include <ppc4xx_enet.h>
-#include <miiphy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int alpr_fpga_init(void);
-
-int board_early_init_f (void)
-{
-	/*-------------------------------------------------------------------------
-	 * Initialize EBC CONFIG
-	 *-------------------------------------------------------------------------*/
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
-	      EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
-	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
-	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
-	      EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
-	mtdcr (uic0pr, 0xfffffe03);	/* per manual */
-	mtdcr (uic0tr, 0x01c00000);	/* per manual */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr (uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-	mtdcr (uic2er, 0x00000000);	/* disable all */
-	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic2pr, 0xffffffff);	/* per ref-board manual */
-	mtdcr (uic2tr, 0x00ff8c0f);	/* per ref-board manual */
-	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uicb0sr, 0xfc000000); /* clear all */
-	mtdcr (uicb0er, 0x00000000); /* disable all */
-	mtdcr (uicb0cr, 0x00000000); /* all non-critical */
-	mtdcr (uicb0pr, 0xfc000000); /* */
-	mtdcr (uicb0tr, 0x00000000); /* */
-	mtdcr (uicb0vr, 0x00000001); /* */
-
-	/* Setup shutdown/SSD empty interrupt as inputs */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
-
-	/* Setup GPIO/IRQ multiplexing */
-	mtsdr(sdr_pfc0, 0x01a33e00);
-
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	unsigned short reg;
-
-	/*
-	 * Configure LED's of both Marvell 88E1111 PHY's
-	 *
-	 * This has to be done after the 4xx ethernet driver is loaded,
-	 * so "last_stage_init()" is the right place.
-	 */
-	miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, &reg);
-	reg |= 0x0001;
-	miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
-	miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, &reg);
-	reg |= 0x0001;
-	miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
-
-	return 0;
-}
-
-static int board_rev(void)
-{
-	/* Setup as input */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
-
-	return (in32(GPIO0_IR) >> 16) & 0x3;
-}
-
-int checkboard (void)
-{
-	char *s = getenv ("serial#");
-
-	printf ("Board: ALPR");
-	if (s != NULL) {
-		puts (", serial# ");
-		puts (s);
-	}
-	printf(" (Rev. %d)\n", board_rev());
-
-	return (0);
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) 0x00000000;
-	uint *pend = (uint *) 0x08000000;
-	uint *p;
-
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller * hose )
-{
-	unsigned long strap;
-
-	/*--------------------------------------------------------------------------+
-	 *	The ocotea board is always configured as the host & requires the
-	 *	PCI arbiter to be enabled.
-	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
-	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
-		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
-		return 0;
-	}
-
-	/* FPGA Init */
-	alpr_fpga_init ();
-
-	return 1;
-}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
-	/*--------------------------------------------------------------------------+
-	 * Disable everything
-	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
-	/*--------------------------------------------------------------------------+
-	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
-	 * options to not support sizes such as 128/256 MB.
-	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
-	out32r( PCIX0_BAR0, 0 );
-
-	/*--------------------------------------------------------------------------+
-	 * Program the board's subsystem id/vendor id
-	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
-
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-
-static void wait_for_pci_ready(void)
-{
-	/*
-	 * Configure EREADY as input
-	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
-	udelay(1000);
-
-	for (;;) {
-		if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
-			return;
-	}
-
-}
-
-int is_pci_host(struct pci_controller *hose)
-{
-	wait_for_pci_ready();
-	return 1;		/* return 1 for host controller */
-}
-#endif /* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440 PCI Master configuration.
-	  | Map PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r( PCIX0_POM0SA, 0 ); /* disable */
-	out32r( PCIX0_POM1SA, 0 ); /* disable */
-	out32r( PCIX0_POM2SA, 0 ); /* disable */
-
-	out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_POM0LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_POM0PCIAH, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
-
-	out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_POM1LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-
-	return (ctrlc());
-}
-#endif
diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk
deleted file mode 100644
index 9e1833591a..0000000000
--- a/board/prodrive/alpr/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# AMCC 440GX Reference Platform (Ocotea) board
-#
-
-#TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFFC0000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c
deleted file mode 100644
index e94360f814..0000000000
--- a/board/prodrive/alpr/fpga.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Altera FPGA configuration support for the ALPR computer from prodrive
- */
-
-#include <common.h>
-#include <altera.h>
-#include <ACEX1K.h>
-#include <command.h>
-#include <asm-ppc/processor.h>
-#include <ppc440.h>
-#include "fpga.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_FPGA)
-
-#ifdef FPGA_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define	PRINTF(fmt,args...)
-#endif
-
-static unsigned long regval;
-
-#define SET_GPIO_REG_0(reg, bit) {				\
-		regval = in32(reg);				\
-		regval &= ~(0x80000000 >> bit);			\
-		out32(reg, regval);				\
-	}
-
-#define SET_GPIO_REG_1(reg, bit) {				\
-		regval = in32(reg);				\
-		regval |= (0x80000000 >> bit);			\
-		out32(reg, regval);				\
-	}
-
-#define	SET_GPIO_0(bit)		SET_GPIO_REG_0(GPIO0_OR, bit)
-#define	SET_GPIO_1(bit)		SET_GPIO_REG_1(GPIO0_OR, bit)
-
-#define FPGA_PRG		(0x80000000 >> CFG_GPIO_PROG_EN)
-#define FPGA_CONFIG		(0x80000000 >> CFG_GPIO_CONFIG)
-#define FPGA_DATA		(0x80000000 >> CFG_GPIO_DATA)
-#define FPGA_CLK		(0x80000000 >> CFG_GPIO_CLK)
-#define OLD_VAL			(FPGA_PRG | FPGA_CONFIG)
-
-#define SET_FPGA(data)		out32(GPIO0_OR, data)
-
-#define FPGA_WRITE_1 {							\
-		SET_FPGA(OLD_VAL | 0        | FPGA_DATA);  /* set data to 1  */	\
-		SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
-
-#define FPGA_WRITE_0 {							\
-		SET_FPGA(OLD_VAL | 0        | 0        );   /* set data to 0  */ \
-		SET_FPGA(OLD_VAL | FPGA_CLK | 0        );}  /* set data to 1  */
-
-/* Plattforminitializations */
-/* Here we have to set the FPGA Chain */
-/* PROGRAM_PROG_EN	= HIGH */
-/* PROGRAM_SEL_DPR	= LOW */
-int fpga_pre_fn (int cookie)
-{
-	unsigned long	reg;
-
-	reg = in32(GPIO0_IR);
-	/* Enable the FPGA Chain */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
-	SET_GPIO_1(CFG_GPIO_PROG_EN);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
-	SET_GPIO_0((CFG_GPIO_SEL_DPR));
-
-	/* initialize the GPIO Pins */
-	/* output */
-	SET_GPIO_0(CFG_GPIO_CLK);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
-
-	/* output */
-	SET_GPIO_0(CFG_GPIO_DATA);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
-
-	/* First we set STATUS to 0 then as an input */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
-	SET_GPIO_0(CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
-
-	/* output */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
-	SET_GPIO_0(CFG_GPIO_CONFIG);
-
-	/* input */
-	SET_GPIO_0(CFG_GPIO_CON_DON);
-	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
-
-	/* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
-	SET_GPIO_0(CFG_GPIO_CONFIG);
-	return FPGA_SUCCESS;
-}
-
-/* Set the state of CONFIG Pin */
-int fpga_config_fn (int assert_config, int flush, int cookie)
-{
-	if (assert_config) {
-		SET_GPIO_1(CFG_GPIO_CONFIG);
-	} else {
-		SET_GPIO_0(CFG_GPIO_CONFIG);
-	}
-	return FPGA_SUCCESS;
-}
-
-/* Returns the state of STATUS Pin */
-int fpga_status_fn (int cookie)
-{
-	unsigned long	reg;
-
-	reg = in32(GPIO0_IR);
-	if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
-		PRINTF("STATUS = HIGH\n");
-		return FPGA_FAIL;
-	}
-	PRINTF("STATUS = LOW\n");
-	return FPGA_SUCCESS;
-}
-
-/* Returns the state of CONF_DONE Pin */
-int fpga_done_fn (int cookie)
-{
-	unsigned long	reg;
-	reg = in32(GPIO0_IR);
-	if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
-		PRINTF("CONF_DON = HIGH\n");
-		return FPGA_FAIL;
-	}
-	PRINTF("CONF_DON = LOW\n");
-	return FPGA_SUCCESS;
-}
-
-/* writes the complete buffer to the FPGA
-   writing the complete buffer in one function is much faster,
-   then calling it for every bit */
-int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
-{
-	size_t bytecount = 0;
-	unsigned char *data = (unsigned char *) buf;
-	unsigned char val=0;
-	int		i;
-	int len_40 = len / 40;
-
-	while (bytecount < len) {
-		val = data[bytecount++];
-		i = 8;
-		do {
-			if (val & 0x01) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			val >>= 1;
-			i --;
-		} while (i > 0);
-
-#ifdef CFG_FPGA_PROG_FEEDBACK
-		if (bytecount % len_40 == 0) {
-			putc ('.');		/* let them know we are alive */
-#ifdef CFG_FPGA_CHECK_CTRLC
-			if (ctrlc ())
-				return FPGA_FAIL;
-#endif
-		}
-#endif
-	}
-	return FPGA_SUCCESS;
-}
-
-/* called, when programming is aborted */
-int fpga_abort_fn (int cookie)
-{
-	SET_GPIO_1((CFG_GPIO_SEL_DPR));
-	return FPGA_SUCCESS;
-}
-
-/* called, when programming was succesful */
-int fpga_post_fn (int cookie)
-{
-	return fpga_abort_fn (cookie);
-}
-
-/* Note that these are pointers to code that is in Flash.  They will be
- * relocated at runtime.
- */
-Altera_CYC2_Passive_Serial_fns fpga_fns = {
-	fpga_pre_fn,
-	fpga_config_fn,
-	fpga_status_fn,
-	fpga_done_fn,
-	fpga_write_fn,
-	fpga_abort_fn,
-	fpga_post_fn
-};
-
-Altera_desc fpga[CONFIG_FPGA_COUNT] = {
-	{Altera_CYC2,
-	 passive_serial,
-	 Altera_EP2C35_SIZE,
-	 (void *) &fpga_fns,
-	 NULL,
-	 0}
-};
-
-/*
- * Initialize the fpga.  Return 1 on success, 0 on failure.
- */
-int alpr_fpga_init (void)
-{
-	int i;
-
-	PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
-	fpga_init (gd->reloc_off);
-
-	for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
-		PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
-		fpga_add (fpga_altera, &fpga[i]);
-	}
-	return 1;
-}
-
-#endif
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
deleted file mode 100644
index 135674c26a..0000000000
--- a/board/prodrive/alpr/init.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)	( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-	tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-	tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-
-	/* PCI */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
-
-	/* NAND */
-	tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbtab_end
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
deleted file mode 100644
index d66b08847a..0000000000
--- a/board/prodrive/alpr/nand.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-
-#include <asm/processor.h>
-#include <nand.h>
-
-struct alpr_ndfc_regs {
-	u8 cmd[4];
-	u8 addr_wait;
-	u8 term;
-	u8 dummy;
-	u8 dummy2;
-	u8 data;
-};
-
-static u8 hwctl;
-static struct alpr_ndfc_regs *alpr_ndfc = NULL;
-
-#define readb(addr)	(u8)(*(volatile u8 *)(addr))
-#define writeb(d,addr)	*(volatile u8 *)(addr) = ((u8)(d))
-
-/*
- * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
- * the NAND devices.  The NDFC has command, address and data registers that
- * when accessed will set up the NAND flash pins appropriately.  We'll use the
- * hwcontrol function to save the configuration in a global variable.
- * We can then use this information in the read and write functions to
- * determine which NDFC register to access.
- *
- * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
- */
-static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-	switch (cmd) {
-	case NAND_CTL_SETCLE:
-		hwctl |= 0x1;
-		break;
-	case NAND_CTL_CLRCLE:
-		hwctl &= ~0x1;
-		break;
-	case NAND_CTL_SETALE:
-		hwctl |= 0x2;
-		break;
-	case NAND_CTL_CLRALE:
-		hwctl &= ~0x2;
-		break;
-	case NAND_CTL_SETNCE:
-		break;
-	case NAND_CTL_CLRNCE:
-		writeb(0x00, &(alpr_ndfc->term));
-		break;
-	}
-}
-
-static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	struct nand_chip *nand = mtd->priv;
-
-	if (hwctl & 0x1)
-		/*
-		 * IO_ADDR_W used as CMD[i] reg to support multiple NAND
-		 * chips.
-		 */
-		writeb(byte, nand->IO_ADDR_W);
-	else if (hwctl & 0x2) {
-		writeb(byte, &(alpr_ndfc->addr_wait));
-	} else
-		writeb(byte, &(alpr_ndfc->data));
-}
-
-static u_char alpr_nand_read_byte(struct mtd_info *mtd)
-{
-	return readb(&(alpr_ndfc->data));
-}
-
-static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *nand = mtd->priv;
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (hwctl & 0x1)
-			 /*
-			  * IO_ADDR_W used as CMD[i] reg to support multiple NAND
-			  * chips.
-			  */
-			writeb(buf[i], nand->IO_ADDR_W);
-		else if (hwctl & 0x2)
-			writeb(buf[i], &(alpr_ndfc->addr_wait));
-		else
-			writeb(buf[i], &(alpr_ndfc->data));
-	}
-}
-
-static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		buf[i] = readb(&(alpr_ndfc->data));
-	}
-}
-
-static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(&(alpr_ndfc->data)))
-			return i;
-
-	return 0;
-}
-
-static int alpr_nand_dev_ready(struct mtd_info *mtd)
-{
-	volatile u_char val;
-
-	/*
-	 * Blocking read to wait for NAND to be ready
-	 */
-	val = readb(&(alpr_ndfc->addr_wait));
-
-	/*
-	 * Return always true
-	 */
-	return 1;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
-
-	nand->eccmode = NAND_ECC_SOFT;
-
-	/* Reference hardware control function */
-	nand->hwcontrol  = alpr_nand_hwcontrol;
-	/* Set command delay time */
-	nand->write_byte = alpr_nand_write_byte;
-	nand->read_byte  = alpr_nand_read_byte;
-	nand->write_buf  = alpr_nand_write_buf;
-	nand->read_buf   = alpr_nand_read_buf;
-	nand->verify_buf = alpr_nand_verify_buf;
-	nand->dev_ready  = alpr_nand_dev_ready;
-
-	return 0;
-}
-#endif
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
deleted file mode 100644
index 4f04089c94..0000000000
--- a/board/prodrive/alpr/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/prodrive/alpr/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/prodrive/p3mx/64460.h b/board/prodrive/p3mx/64460.h
deleted file mode 100644
index 8bb0ebfd21..0000000000
--- a/board/prodrive/p3mx/64460.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * main board support/init for the Galileo Eval board DB64460.
- */
-
-#ifndef __64460_H__
-#define __64460_H__
-
-/* CPU Configuration bits */
-#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
-#define	CPU_CONF_SINGLE_CPU	(1 << 11)
-#define	CPU_CONF_ENDIANESS	(1 << 12)
-#define CPU_CONF_PIPELINE	(1 << 13)
-#define CPU_CONF_STOP_RETRY	(1 << 17)
-#define CPU_CONF_MULTI_DECODE	(1 << 18)
-#define CPU_CONF_DP_VALID	(1 << 19)
-#define CPU_CONF_PERR_PROP	(1 << 22)
-#define CPU_CONF_AACK_DELAY_2	(1 << 25)
-#define CPU_CONF_AP_VALID	(1 << 26)
-#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
-
-/* CPU Master Control bits */
-#define CPU_MAST_CTL_ARB_EN	(1 << 8)
-#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
-#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
-#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
-#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
-#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
-
-#endif /* __64460_H__ */
diff --git a/board/prodrive/p3mx/Makefile b/board/prodrive/p3mx/Makefile
deleted file mode 100644
index bf74a5a83b..0000000000
--- a/board/prodrive/p3mx/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../../Marvell/common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-SOBJS	= misc.o
-COBJS	= $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \
-		../../Marvell/common/i2c.o ../../Marvell/common/memory.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend *~
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/prodrive/p3mx/config.mk b/board/prodrive/p3mx/config.mk
deleted file mode 100644
index 35bf1c1554..0000000000
--- a/board/prodrive/p3mx/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# p3mx boards (P3M750 & P3M7448)
-#
-
-TEXT_BASE = 0xfff00000
diff --git a/board/prodrive/p3mx/eth.h b/board/prodrive/p3mx/eth.h
deleted file mode 100644
index aab32d2a5a..0000000000
--- a/board/prodrive/p3mx/eth.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __EVB64360_ETH_H__
-#define __EVB64360_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-
-
-int db64360_eth0_poll(void);
-int db64360_eth0_transmit(unsigned int s, volatile char *p);
-void db64360_eth0_disable(void);
-bool network_start(bd_t *bis);
-
-
-#endif /* __EVB64360_ETH_H__ */
diff --git a/board/prodrive/p3mx/misc.S b/board/prodrive/p3mx/misc.S
deleted file mode 100644
index 160b1d31f7..0000000000
--- a/board/prodrive/p3mx/misc.S
+++ /dev/null
@@ -1,245 +0,0 @@
-#include <config.h>
-#include <74xx_7xx.h>
-#include "version.h"
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#include "../../Marvell/include/mv_gen_reg.h"
-
-#ifdef CONFIG_ECC
-	/* Galileo specific asm code for initializing ECC */
-	.globl board_relocate_rom
-board_relocate_rom:
-	mflr	r7
-	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
-	/* if we're using ECC, we must use the DMA engine to copy ourselves */
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-
-	mtlr	r7
-	blr
-
-	.globl board_init_ecc
-board_init_ecc:
-	mflr	r7
-	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
-
-	/* now that we're running from ram, init the rest of main memory
-	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
-
-	divw	r3, r10, r8
-
-	/* set up the counter, and init the starting address */
-	mtctr	r3
-	li	r12, 0
-
-	/* bytes per transfer */
-	mr	r5, r8
-about_to_init_ecc:
-1:	mr	r3, r12
-	mr	r4, r12
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-	add	r12, r12, r8
-	bdnz	1b
-
-	mtlr	r7
-	blr
-
-	/* r3:	dest addr
-	 * r4:	source addr
-	 * r5:	byte count
-	 * r11: gt regbase
-	 * trashes:	 r6, r5
-	 */
-start_idma_transfer_0:
-	/* set the byte count, including the OWN bit */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_BYTE_COUNT
-	stwbrx	r5, 0, (r6)
-
-	/* set the source address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
-	stwbrx	r4, 0, (r6)
-
-	/* set the dest address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
-	stwbrx	r3, 0, (r6)
-
-	/* set the next record pointer */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0NEXT_RECORD_POINTER
-	stwbrx	r5, 0, (r6)
-
-	/* set the low control register */
-	/* bit 9 is NON chained mode, bit 31 is new style descriptors.
-	   bit 12 is channel enable */
-	ori	r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
-	/* 15 shifted by 16 (oris) == bit 31 */
-	oris	r5, r5, (1 << 15)
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-
-	/* this waits for the bytecount to return to zero, indicating
-	 * that the trasfer is complete */
-wait_for_idma_0:
-	mr	r5, r11
-	lis	r6, 0xff
-	ori	r6, r6, 0xffff
-	ori	r5, r5, CHANNEL0_DMA_BYTE_COUNT
-1:	lwbrx	r4, 0, (r5)
-	and.	r4, r4, r6
-	bne	1b
-
-	blr
-
-	/* this turns off channel 0 of the idma engine */
-stop_idma_engine_0:
-	/* shut off the DMA engine */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-#endif
-
-#ifdef CFG_BOARD_ASM_INIT
-	/* NOTE: trashes r3-r7 */
-	.globl board_asm_init
-board_asm_init:
-	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
-	li	r5, INTERNAL_SPACE_DECODE
-
-	/* test to see if we've already moved */
-	lwbrx	r6, r5, r4
-	andi.	r6, r6, 0xffff
-	/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
-/*	rlwinm	r7, r4, 8, 16, 31
-	rlwinm	r7, r4, 12, 16, 31	*/ /* original */
-	rlwinm	r7, r4, 16, 16, 31
-	/* -----------------------------------------------------*/
-	cmp	cr0, r7, r6
-	beqlr
-
-	/* nope, have to move the registers */
-	lwbrx	r6, r5, r3
-	andis.	r6, r6, 0xffff
-	or	r6, r6, r7
-	stwbrx	r6, r5, r3
-
-	/* now, poll for the change */
-1:	lwbrx	r7, r5, r4
-	cmp	cr0, r7, r6
-	bne	1b
-
-	lis	r3, CFG_INT_SRAM_BASE@h
-	ori	r3, r3, CFG_INT_SRAM_BASE@l
-	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
-	li	r5, INTEGRATED_SRAM_BASE_ADDR
-	stwbrx  r3, r5, r4
-
-2:	lwbrx	r6, r5, r4
-	cmp	cr0, r3, r6
-	bne	2b
-
-	/* done! */
-	blr
-#endif
-
-/* For use of the debug LEDs */
-	.global led_on0_relocated
-led_on0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC80
-	ori	r18, r18, 0x8000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_off0_relocated
-led_off0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC81
-	ori	r18, r18, 0x4000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_on0
-led_on0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off0
-led_off0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x4000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on1
-led_on1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off1
-led_off1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on2
-led_on2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x0000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off2
-led_off2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c
deleted file mode 100644
index f1e84dfbd1..0000000000
--- a/board/prodrive/p3mx/mpsc.c
+++ /dev/null
@@ -1,996 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-/*
- * mpsc.c - driver for console over the MPSC.
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <asm/cache.h>
-
-#include <malloc.h>
-#include "mpsc.h"
-
-#include "mv_regs.h"
-
-#include "../../Marvell/include/memory.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Define this if you wish to use the MPSC as a register based UART.
- * This will force the serial port to not use the SDMA engine at all.
- */
-#undef CONFIG_MPSC_DEBUG_PORT
-
-
-int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
-char (*mpsc_getchar) (void) = mpsc_getchar_debug;
-int (*mpsc_test_char) (void) = mpsc_test_char_debug;
-
-
-static volatile unsigned int *rx_desc_base = NULL;
-static unsigned int rx_desc_index = 0;
-static volatile unsigned int *tx_desc_base = NULL;
-static unsigned int tx_desc_index = 0;
-
-/* local function declarations */
-static int galmpsc_connect (int channel, int connect);
-static int galmpsc_route_rx_clock (int channel, int brg);
-static int galmpsc_route_tx_clock (int channel, int brg);
-static int galmpsc_write_config_regs (int mpsc, int mode);
-static int galmpsc_config_channel_regs (int mpsc);
-static int galmpsc_set_char_length (int mpsc, int value);
-static int galmpsc_set_stop_bit_length (int mpsc, int value);
-static int galmpsc_set_parity (int mpsc, int value);
-static int galmpsc_enter_hunt (int mpsc);
-static int galmpsc_set_brkcnt (int mpsc, int value);
-static int galmpsc_set_tcschar (int mpsc, int value);
-static int galmpsc_set_snoop (int mpsc, int value);
-static int galmpsc_shutdown (int mpsc);
-
-static int galsdma_set_RFT (int channel);
-static int galsdma_set_SFM (int channel);
-static int galsdma_set_rxle (int channel);
-static int galsdma_set_txle (int channel);
-static int galsdma_set_burstsize (int channel, unsigned int value);
-static int galsdma_set_RC (int channel, unsigned int value);
-
-static int galbrg_set_CDV (int channel, int value);
-static int galbrg_enable (int channel);
-static int galbrg_disable (int channel);
-static int galbrg_set_clksrc (int channel, int value);
-static int galbrg_set_CUV (int channel, int value);
-
-static void galsdma_enable_rx (void);
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress,
-				  unsigned int size);
-
-
-#define SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-#define FLUSH_DCACHE(a,b)
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-static void mpsc_debug_init (void)
-{
-
-	volatile unsigned int temp;
-
-	/* Clear the CFR  (CHR4) */
-	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
-	temp &= 0xffffff00;
-	temp |= BIT29;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
-	temp |= (BIT12 | BIT15);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-
-	/* Set int mask */
-	temp = GTREGREAD (GALMPSC_0_INT_MASK);
-	temp |= BIT6;
-	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
-}
-#endif
-
-char mpsc_getchar_debug (void)
-{
-	volatile int temp;
-	volatile unsigned int cause;
-
-	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	while ((cause & BIT6) == 0) {
-		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
-	}
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
-			  (CHANNEL * GALMPSC_REG_GAP));
-	/* By writing 1's to the set bits, the register is cleared */
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
-		      temp);
-	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
-	return (temp >> 16) & 0xff;
-}
-
-/* special function for running out of flash.  doesn't modify any
- * global variables [josh] */
-int mpsc_putchar_early (char ch)
-{
-	int mpsc = CHANNEL;
-	int temp =
-		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	galmpsc_set_tcschar (mpsc, ch);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
-		      temp | 0x200);
-
-#define MAGIC_FACTOR	(10*1000000)
-
-	udelay (MAGIC_FACTOR / gd->baudrate);
-	return 0;
-}
-
-/* This is used after relocation, see serial.c and mpsc_init2 */
-static int mpsc_putchar_sdma (char ch)
-{
-	volatile unsigned int *p;
-	unsigned int temp;
-
-
-	/* align the descriptor */
-	p = tx_desc_base;
-	memset ((void *) p, 0, 8 * sizeof (unsigned int));
-
-	/* fill one 64 bit buffer */
-	/* word swap, pad with 0 */
-	p[4] = 0;		/* x */
-	p[5] = (unsigned int) ch;	/* x */
-
-	/* CHANGED completely according to GT64260A dox - NTL */
-	p[0] = 0x00010001;	/* 0 */
-	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
-	p[2] = 0;		/* 8 */
-	p[3] = (unsigned int) &p[4];	/* c */
-
-
-	FLUSH_DCACHE (&p[0], &p[8]);
-
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &p[0]);
-
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= (TX_DEMAND | TX_STOP);
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	while (p[1] & DESC_OWNER_BIT) {
-		udelay (100);
-		INVALIDATE_DCACHE (&p[1], &p[2]);
-	}
-	return 0;
-}
-
-char mpsc_getchar_sdma (void)
-{
-	static unsigned int done = 0;
-	volatile char ch;
-	unsigned int len = 0, idx = 0, temp;
-
-	volatile unsigned int *p;
-
-
-	do {
-		p = &rx_desc_base[rx_desc_index * 8];
-
-		INVALIDATE_DCACHE (&p[0], &p[1]);
-		/* Wait for character */
-		while (p[1] & DESC_OWNER_BIT) {
-			udelay (100);
-			INVALIDATE_DCACHE (&p[0], &p[1]);
-		}
-
-		/* Handle error case */
-		if (p[1] & (1 << 15)) {
-			printf ("oops, error: %08x\n", p[1]);
-
-			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
-					  (CHANNEL * GALMPSC_REG_GAP));
-			temp |= (1 << 23);
-			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
-				      (CHANNEL * GALMPSC_REG_GAP), temp);
-
-			/* Can't poll on abort bit, so we just wait. */
-			udelay (100);
-
-			galsdma_enable_rx ();
-		}
-
-		/* Number of bytes left in this descriptor */
-		len = p[0] & 0xffff;
-
-		if (len) {
-			/* Where to look */
-			idx = 5;
-			if (done > 3)
-				idx = 4;
-			if (done > 7)
-				idx = 7;
-			if (done > 11)
-				idx = 6;
-
-			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
-			ch = p[idx] & 0xff;
-			done++;
-		}
-
-		if (done < len) {
-			/* this descriptor has more bytes still
-			 * shift down the char we just read, and leave the
-			 * buffer in place for the next time around
-			 */
-			p[idx] = p[idx] >> 8;
-			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
-		}
-
-		if (done == len) {
-			/* nothing left in this descriptor.
-			 * go to next one
-			 */
-			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-			p[0] = 0x00100000;
-			FLUSH_DCACHE (&p[0], &p[1]);
-			/* Next descriptor */
-			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
-			done = 0;
-		}
-	} while (len == 0);	/* galileo bug.. len might be zero */
-
-	return ch;
-}
-
-
-int mpsc_test_char_debug (void)
-{
-	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
-		return 0;
-	else {
-		return 1;
-	}
-}
-
-
-int mpsc_test_char_sdma (void)
-{
-	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
-
-	INVALIDATE_DCACHE (&p[1], &p[2]);
-
-	if (p[1] & DESC_OWNER_BIT)
-		return 0;
-	else
-		return 1;
-}
-
-int mpsc_init (int baud)
-{
-	/* BRG CONFIG */
-	galbrg_set_baudrate (CHANNEL, baud);
-	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
-	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
-	galbrg_enable (CHANNEL);	/* Enable BRG */
-
-	/* Set up clock routing */
-	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
-
-	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
-	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
-
-	/* reset MPSC state */
-	galmpsc_shutdown (CHANNEL);
-
-	/* SDMA CONFIG */
-	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
-	galsdma_set_txle (CHANNEL);
-	galsdma_set_rxle (CHANNEL);
-	galsdma_set_RC (CHANNEL, 0xf);
-	galsdma_set_SFM (CHANNEL);
-	galsdma_set_RFT (CHANNEL);
-
-	/* MPSC CONFIG */
-	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
-	galmpsc_config_channel_regs (CHANNEL);
-	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
-	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
-	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
-
-#ifdef CONFIG_MPSC_DEBUG_PORT
-	mpsc_debug_init ();
-#endif
-
-	/* COMM_MPSC CONFIG */
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
-#else
-	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
-#endif
-
-	return 0;
-}
-
-
-void mpsc_sdma_init (void)
-{
-	/* Setup SDMA channel0 SDMA_CONFIG_REG*/
-	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
-
-	/*  Enable MPSC-Window0 for DRAM Bank 0 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT,
-				   MV64460_SDMA_DRAM_CS_0_TARGET,
-				   0,
-				   memoryGetBankBaseAddress(0),
-				   memoryGetBankSize(0)) != true)
-		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-	/*  Enable MPSC-Window1 for DRAM Bank 1 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT,
-				   MV64460_SDMA_DRAM_CS_1_TARGET,
-				   0,
-				   memoryGetBankBaseAddress(1),
-				   memoryGetBankSize(1)) != true)
-		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-	/*  Disable MPSC-Window2 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT,
-				   MV64460_SDMA_DRAM_CS_2_TARGET,
-				   0,
-				   memoryGetBankBaseAddress(2),
-				   memoryGetBankSize(2)) != true)
-		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
-			__FUNCTION__);
-
-
-	/*  Disable MPSC-Window3 */
-	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT,
-				   MV64460_SDMA_DRAM_CS_3_TARGET,
-				   0,
-				   memoryGetBankBaseAddress(3),
-				   memoryGetBankSize(3)) != true)
-		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
-			__FUNCTION__);
-
-	/*  Setup MPSC0 access mode Window0 full access */
-	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
-			 (MV64460_SDMA_WIN_ACCESS_FULL <<
-			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-	/*  Setup MPSC1 access mode Window1 full access */
-	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
-			 (MV64460_SDMA_WIN_ACCESS_FULL <<
-			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-
-	/* Setup MPSC internal address space base address 	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
-
-	/* no high address remap*/
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
-	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
-
-	/* clear interrupt cause register for MPSC (fault register)*/
-	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
-}
-
-
-void mpsc_init2 (void)
-{
-	int i;
-
-#ifndef CONFIG_MPSC_DEBUG_PORT
-	mpsc_putchar = mpsc_putchar_sdma;
-	mpsc_getchar = mpsc_getchar_sdma;
-	mpsc_test_char = mpsc_test_char_sdma;
-#endif
-	/* RX descriptors */
-	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	rx_desc_base = (unsigned int *)
-		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
-
-	rx_desc_index = 0;
-
-	memset ((void *) rx_desc_base, 0,
-		(RX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < RX_DESC; i++) {
-		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
-		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
-		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
-		rx_desc_base[i * 8] = 0x00100000;
-	}
-	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
-
-	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
-		      (unsigned int) &rx_desc_base[0]);
-
-	/* TX descriptors */
-	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
-						sizeof (unsigned int));
-
-	/* align descriptors */
-	tx_desc_base = (unsigned int *)
-		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
-
-	tx_desc_index = -1;
-
-	memset ((void *) tx_desc_base, 0,
-		(TX_DESC * 8) * sizeof (unsigned int));
-
-	for (i = 0; i < TX_DESC; i++) {
-		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
-		tx_desc_base[i * 8 + 3] =
-			(unsigned int) &tx_desc_base[i * 8 + 4];
-		tx_desc_base[i * 8 + 2] =
-			(unsigned int) &tx_desc_base[(i + 1) * 8];
-		tx_desc_base[i * 8 + 1] =
-			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
-
-		/* set sbytecnt and shadow byte cnt to 1 */
-		tx_desc_base[i * 8] = 0x00010001;
-	}
-	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
-
-	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
-
-	udelay (100);
-
-	galsdma_enable_rx ();
-
-	return;
-}
-
-int galbrg_set_baudrate (int channel, int rate)
-{
-	int clock;
-
-	galbrg_disable (channel);	/*ok */
-
-#ifdef ZUMA_NTL
-	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
-#endif
-
-	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
-
-	galbrg_enable (channel);
-
-	gd->baudrate = rate;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-/* Below are all the private functions that no one else needs */
-
-static int galbrg_set_CDV (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= (value & 0x0000FFFF);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_enable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp |= 0x00010000;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_disable (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFFEFFFF;
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galbrg_set_clksrc (int channel, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
-	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
-	temp |= (value << 18);
-	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-	return 0;
-}
-
-static int galbrg_set_CUV (int channel, int value)
-{
-	/* set CountUpValue */
-	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
-
-	return 0;
-}
-
-
-static int galsdma_set_RFT (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000001;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_SFM (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000002;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_rxle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000040;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_txle (int channel)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp |= 0x00000080;
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_RC (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= ~0x0000003c;
-	temp |= (value << 2);
-	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
-		      temp);
-
-	return 0;
-}
-
-static int galsdma_set_burstsize (int channel, unsigned int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
-	temp &= 0xFFFFCFFF;
-	switch (value) {
-	case 8:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x3 << 12)));
-		break;
-
-	case 4:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x2 << 12)));
-		break;
-
-	case 2:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x1 << 12)));
-		break;
-
-	case 1:
-		GT_REG_WRITE (GALSDMA_0_CONF_REG +
-			      (channel * GALSDMA_REG_DIFF),
-			      (temp | (0x0 << 12)));
-		break;
-
-	default:
-		return -1;
-		break;
-	}
-
-	return 0;
-}
-
-static int galmpsc_connect (int channel, int connect)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
-
-	if ((channel == 0) && connect)
-		temp &= ~0x00000007;
-	else if ((channel == 1) && connect)
-		temp &= ~(0x00000007 << 6);
-	else if ((channel == 0) && !connect)
-		temp |= 0x00000007;
-	else
-		temp |= (0x00000007 << 6);
-
-	/* Just in case... */
-	temp &= 0x3fffffff;
-
-	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_rx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_route_tx_clock (int channel, int brg)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
-
-	if (channel == 0) {
-		temp &= ~0x0000000F;
-		temp |= brg;
-	} else {
-		temp &= ~0x00000F00;
-		temp |= (brg << 8);
-	}
-
-	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
-
-	return 0;
-}
-
-static int galmpsc_write_config_regs (int mpsc, int mode)
-{
-	if (mode == GALMPSC_UART) {
-		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
-		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
-			      0x000004c4);
-
-		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
-		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
-			      0x024003f8);
-		/*        22 2222 1111 */
-		/*        54 3210 9876 */
-		/* 0000 0010 0000 0000 */
-		/*       1 */
-		/*       098 7654 3210 */
-		/* 0000 0011 1111 1000 */
-	} else
-		return -1;
-
-	return 0;
-}
-
-static int galmpsc_config_channel_regs (int mpsc)
-{
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
-
-	galmpsc_set_brkcnt (mpsc, 0x3);
-	galmpsc_set_tcschar (mpsc, 0xab);
-
-	return 0;
-}
-
-static int galmpsc_set_brkcnt (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0x0000FFFF;
-	temp |= (value << 16);
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_tcschar (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFF0000;
-	temp |= value;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_char_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFCFFF;
-	temp |= (value << 12);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_stop_bit_length (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
-	temp &= 0xFFFFBFFF;
-	temp |= (value << 14);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_set_parity (int mpsc, int value)
-{
-	unsigned int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	if (value != -1) {
-		temp &= 0xFFF3FFF3;
-		temp |= ((value << 18) | (value << 2));
-		temp |= ((value << 17) | (value << 1));
-	} else {
-		temp &= 0xFFF1FFF1;
-	}
-
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	return 0;
-}
-
-static int galmpsc_enter_hunt (int mpsc)
-{
-	int temp;
-
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= 0x80000000;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
-	       MPSC_ENTER_HUNT) {
-		udelay (1);
-	}
-	return 0;
-}
-
-
-static int galmpsc_shutdown (int mpsc)
-{
-	unsigned int temp;
-
-	/* cause RX abort (clears RX) */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
-	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
-	temp &= ~MPSC_ENTER_HUNT;
-	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
-
-	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
-
-	/* shut down the MPSC */
-	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
-	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
-	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
-
-	udelay (100);
-
-	/* shut down the sdma engines. */
-	/* reset config to default */
-	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
-
-	udelay (100);
-
-	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
-
-	udelay (100);
-
-	return 0;
-}
-
-static void galsdma_enable_rx (void)
-{
-	int temp;
-
-	/* Enable RX processing */
-	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
-	temp |= RX_ENABLE;
-	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
-
-	galmpsc_enter_hunt (CHANNEL);
-}
-
-static int galmpsc_set_snoop (int mpsc, int value)
-{
-	int reg =
-		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
-		MPSC_0_ADDRESS_CONTROL_LOW;
-	int temp = GTREGREAD (reg);
-
-	if (value)
-		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
-	else
-		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
-	GT_REG_WRITE (reg, temp);
-	return 0;
-}
-
-/*******************************************************************************
-* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map.
-*
-* DESCRIPTION:
-*       the MV64460 SDMA has its own address decoding map that is de-coupled
-*       from the CPU interface address decoding windows. The SDMA channels
-*       share four address windows. Each region can be individually configured
-*       by this function by associating it to a target interface and setting
-*       base and size values.
-*
-*      NOTE!!!
-*       The size must be in 64Kbyte granularity.
-*       The base address must be aligned to the size.
-*       The size must be a series of 1s followed by a series of zeros
-*
-* OUTPUT:
-*       None.
-*
-* RETURN:
-*       True for success, false otherwise.
-*
-*******************************************************************************/
-
-static int galsdma_set_mem_space (unsigned int memSpace,
-				  unsigned int memSpaceTarget,
-				  unsigned int memSpaceAttr,
-				  unsigned int baseAddress, unsigned int size)
-{
-	unsigned int temp;
-
-	if (size == 0) {
-		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-		return true;
-	}
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return false;
-	}
-	if (size < 0x10000) {
-		return false;
-	}
-
-	/* Align size and base to 64K */
-	baseAddress &= 0xffff0000;
-	size &= 0xffff0000;
-	temp = size >> 16;
-
-	/* Checking that the size is a sequence of '1' followed by a
-	   sequence of '0' starting from LSB to MSB. */
-	while ((temp > 0) && (temp & 0x1)) {
-		temp = temp >> 1;
-	}
-
-	if (temp != 0) {
-		GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
-				   1 << memSpace);
-	} else {
-		/* An invalid size was specified */
-		return false;
-	}
-	return true;
-}
diff --git a/board/prodrive/p3mx/mpsc.h b/board/prodrive/p3mx/mpsc.h
deleted file mode 100644
index a03d1cc0f8..0000000000
--- a/board/prodrive/p3mx/mpsc.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include "../../Marvell/include/mv_gen_reg.h"
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_sdma_init(void);
-void mpsc_init2(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-char mpsc_getchar_debug(void);
-int mpsc_test_char_debug(void);
-
-int mpsc_test_char_sdma(void);
-
-extern int (*mpsc_putchar)(char ch);
-extern char (*mpsc_getchar)(void);
-extern int (*mpsc_test_char)(void);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC     5
-#define RX_DESC     20
-
-#define DESC_FIRST  0x00010000
-#define DESC_LAST   0x00020000
-#define DESC_OWNER_BIT  0x80000000
-
-#define TX_DEMAND   0x00800000
-#define TX_STOP     0x00010000
-#define RX_ENABLE   0x00000080
-
-#define SDMA_RX_ABORT 		  (1 << 15)
-#define SDMA_TX_ABORT 		  (1 << 31)
-#define MPSC_TX_ABORT 		  (1 << 7)
-#define MPSC_RX_ABORT             (1 << 23)
-#define MPSC_ENTER_HUNT           (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT            0x1
-#define GALMPSC_DISCONNECT         0x0
-
-#define GALMPSC_UART               0x1
-
-#define GALMPSC_STOP_BITS_1        0x0
-#define GALMPSC_STOP_BITS_2        0x1
-#define GALMPSC_CHAR_LENGTH_8      0x3
-#define GALMPSC_CHAR_LENGTH_7      0x2
-
-#define GALMPSC_PARITY_ODD         0x0
-#define GALMPSC_PARITY_EVEN        0x2
-#define GALMPSC_PARITY_MARK        0x3
-#define GALMPSC_PARITY_SPACE       0x1
-#define GALMPSC_PARITY_NONE        -1
-
-#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
-#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
-#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
-#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
-
-#define GALMPSC_REG_GAP            0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
-#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
-#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
-#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
-#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
-#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
-#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
-#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
-#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST     (1 << 16)
-#define GALSDMA_COMMAND_LAST      (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO      (1 << 30)
-#define GALSDMA_COMMAND_OWNER     (1 << 31)
-
-#define GALSDMA_RX                 0
-#define GALSDMA_TX                 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
-#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
-#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
-#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
-#define GALSDMA_REG_DIFF           0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
-#define GALMPSC_0_INT_CAUSE        0xb804
-#define GALMPSC_0_INT_MASK         0xb884
-
-#define GALSDMA_MODE_UART          0
-#define GALSDMA_MODE_BISYNC        1
-#define GALSDMA_MODE_HDLC          2
-#define GALSDMA_MODE_TRANSPARENT   3
-
-#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
-#define GALBRG_REG_GAP             0x0008
-#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
-
-#endif /* __MPSC_H__ */
diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c
deleted file mode 100644
index 632a320f56..0000000000
--- a/board/prodrive/p3mx/mv_eth.c
+++ /dev/null
@@ -1,2942 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- 3 the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.c - header file for the polled mode GT ethernet driver
- */
-#include <common.h>
-#include <net.h>
-#include <malloc.h>
-#include <miiphy.h>
-
-#include "mv_eth.h"
-
-/* enable Debug outputs */
-
-#undef DEBUG_MV_ETH
-
-#ifdef DEBUG_MV_ETH
-#define DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-/* PHY DFCDL Registers */
-#define ETH_PHY_DFCDL_CONFIG0_REG	0x2100
-#define ETH_PHY_DFCDL_CONFIG1_REG	0x2104
-#define ETH_PHY_DFCDL_ADDR_REG		0x2110
-#define ETH_PHY_DFCDL_DATA0_REG		0x2114
-
-#define PHY_AUTONEGOTIATE_TIMEOUT	4000	/* 4000 ms autonegotiate timeout */
-#define PHY_UPDATE_TIMEOUT		10000
-
-#undef MV64460_CHECKSUM_OFFLOAD
-/*************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.	 *
-*************************************************************************/
-
-/* Definition for configuring driver */
-/* #define UPDATE_STATS_BY_SOFTWARE */
-#undef MV64460_RX_QUEUE_FILL_ON_TASK
-
-/* Constants */
-#define MAGIC_ETH_RUNNING		8031971
-#define MV64460_INTERNAL_SRAM_SIZE	_256K
-#define EXTRA_BYTES 32
-#define WRAP	   ETH_HLEN + 2 + 4 + 16
-#define BUFFER_MTU dev->mtu + WRAP
-#define INT_CAUSE_UNMASK_ALL		0x0007ffff
-#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
-#ifdef MV64460_RX_FILL_ON_TASK
-#define INT_CAUSE_MASK_ALL		0x00000000
-#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
-#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
-#endif
-
-/* Read/Write to/from MV64460 internal registers */
-#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
-#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
-#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
-#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
-
-#define my_cpu_to_le32(x) my_le32_to_cpu((x))
-
-/* Static function declarations */
-static int mv64460_eth_real_open (struct eth_device *eth);
-static int mv64460_eth_real_stop (struct eth_device *eth);
-static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
-						       *dev);
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
-static void mv64460_eth_update_stat (struct eth_device *dev);
-bool db64460_eth_start (struct eth_device *eth);
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset);
-int mv64460_eth_receive (struct eth_device *dev);
-
-int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
-
-int mv_miiphy_read(char *devname, unsigned char phy_addr,
-		   unsigned char phy_reg, unsigned short *value);
-int mv_miiphy_write(char *devname, unsigned char phy_addr,
-		    unsigned char phy_reg, unsigned short value);
-
-int phy_setup_aneg (char *devname, unsigned char addr);
-
-#ifndef	 UPDATE_STATS_BY_SOFTWARE
-static void mv64460_eth_print_stat (struct eth_device *dev);
-#endif
-/* Processes a received packet */
-extern void NetReceive (volatile uchar *, int);
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-unsigned long my_le32_to_cpu (unsigned long x)
-{
-	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) << 8) |
-		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
-}
-
-/*************************************************
- *Helper functions - used inside the driver only *
- *************************************************/
-#ifdef DEBUG_MV_ETH
-void print_globals (struct eth_device *dev)
-{
-	printf ("Ethernet PRINT_Globals-Debug function\n");
-	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
-		(unsigned int) dev->priv);
-	printf ("Base Address for mv64460_eth_priv:	%08x\n",
-		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
-				 port_private));
-
-	printf ("GT Internal Base Address:	%08x\n",
-		INTERNAL_REG_BASE_ADDR);
-	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
-	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
-	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_rx_buffer_base[0],
-		(MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
-	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
-		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
-		p_tx_buffer_base[0],
-		(MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
-}
-#endif
-
-/**********************************************************************
- * mv64460_eth_print_phy_status
- *
- * Prints gigabit ethenret phy status
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-void mv64460_eth_print_phy_status (struct eth_device *dev)
-{
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	unsigned int port_status, phy_reg_data;
-
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Check Link status on phy */
-	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
-	if (!(phy_reg_data & 0x20)) {
-		printf ("Ethernet port changed link status to DOWN\n");
-	} else {
-		port_status =
-			MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
-		printf ("Ethernet status port %d: Link up", port_num);
-		printf (", %s",
-			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
-		if (port_status & BIT4)
-			printf (", Speed 1 Gbps");
-		else
-			printf (", %s",
-				(port_status & BIT5) ? "Speed 100 Mbps" :
-				"Speed 10 Mbps");
-		printf ("\n");
-	}
-}
-
-/**********************************************************************
- * u-boot entry functions for mv64460_eth
- *
- **********************************************************************/
-int db64460_eth_probe (struct eth_device *dev)
-{
-	return ((int) db64460_eth_start (dev));
-}
-
-int db64460_eth_poll (struct eth_device *dev)
-{
-	return mv64460_eth_receive (dev);
-}
-
-int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
-			  int length)
-{
-	mv64460_eth_xmit (dev, packet, length);
-	return 0;
-}
-
-void db64460_eth_disable (struct eth_device *dev)
-{
-	mv64460_eth_stop (dev);
-}
-
-#define DFCDL(write,read)   ((write << 6) | read)
-unsigned int  ethDfcdls[] = {
-	DFCDL(0,0),	DFCDL(1,1),	DFCDL(2,2),	DFCDL(3,3),
-	DFCDL(4,4),	DFCDL(5,5),	DFCDL(6,6),	DFCDL(7,7),
-	DFCDL(8,8),	DFCDL(9,9),	DFCDL(10,10),	DFCDL(11,11),
-	DFCDL(12,12),	DFCDL(13,13),	DFCDL(14,14),	DFCDL(15,15),
-	DFCDL(16,16),	DFCDL(17,17),	DFCDL(18,18),	DFCDL(19,19),
-	DFCDL(20,20),	DFCDL(21,21),	DFCDL(22,22),	DFCDL(23,23),
-	DFCDL(24,24),	DFCDL(25,25),	DFCDL(26,26),	DFCDL(27,27),
-	DFCDL(28,28),	DFCDL(29,29),	DFCDL(30,30),	DFCDL(31,31),
-	DFCDL(32,32),	DFCDL(33,33),	DFCDL(34,34),	DFCDL(35,35),
-	DFCDL(36,36),	DFCDL(37,37),	DFCDL(38,38),	DFCDL(39,39),
-	DFCDL(40,40),	DFCDL(41,41),	DFCDL(42,42),	DFCDL(43,43),
-	DFCDL(44,44),	DFCDL(45,45),	DFCDL(46,46),	DFCDL(47,47),
-	DFCDL(48,48),	DFCDL(49,49),	DFCDL(50,50),	DFCDL(51,51),
-	DFCDL(52,52),	DFCDL(53,53),	DFCDL(54,54),	DFCDL(55,55),
-	DFCDL(56,56),	DFCDL(57,57),	DFCDL(58,58),	DFCDL(59,59),
-	DFCDL(60,60),	DFCDL(61,61),	DFCDL(62,62),	DFCDL(63,63),
-};
-
-void mv_eth_phy_init (void)
-{
-	int i;
-
-	MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0);
-
-	for (i = 0; i < 64; i++) {
-		MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]);
-	}
-
-	MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000);
-}
-
-void mv6446x_eth_initialize (bd_t * bis)
-{
-	struct eth_device *dev;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	int devnum, x, temp;
-	char *s, *e, buf[64];
-
-	/* P3M750 only
-	 * Set RGMII clock drives strength
-	 */
-	temp = MV_REG_READ(0x20A0);
-	temp |= 0x04000080;
-	MV_REG_WRITE(0x20A0, temp);
-
-	mv_eth_phy_init();
-
-	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
-		dev = calloc (sizeof (*dev), 1);
-		if (!dev) {
-			printf ("%s: mv_enet%d allocation failure, %s\n",
-				__FUNCTION__, devnum, "eth_device structure");
-			return;
-		}
-
-		/* must be less than NAMESIZE (16) */
-		sprintf (dev->name, "mv_enet%d", devnum);
-
-#ifdef DEBUG
-		printf ("Initializing %s\n", dev->name);
-#endif
-
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-		case 1:
-			s = "eth1addr";
-			break;
-		case 2:
-			s = "eth2addr";
-			break;
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-		/* ronen - set the MAC addr in the HW */
-		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
-
-		dev->init = (void *) db64460_eth_probe;
-		dev->halt = (void *) ethernet_phy_reset;
-		dev->send = (void *) db64460_eth_transmit;
-		dev->recv = (void *) db64460_eth_poll;
-
-		ethernet_private = calloc (sizeof (*ethernet_private), 1);
-		dev->priv = (void *)ethernet_private;
-		if (!ethernet_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Private Device Structure");
-			free (dev);
-			return;
-		}
-		/* start with an zeroed ETH_PORT_INFO */
-		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
-		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-		/* set pointer to memory for stats data structure etc... */
-		port_private = calloc (sizeof (*ethernet_private), 1);
-		ethernet_private->port_private = (void *)port_private;
-		if (!port_private) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Port Private Device Structure");
-
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-
-		port_private->stats =
-			calloc (sizeof (struct net_device_stats), 1);
-		if (!port_private->stats) {
-			printf ("%s: %s allocation failure, %s\n",
-				__FUNCTION__, dev->name,
-				"Net stat Structure");
-
-			free (port_private);
-			free (ethernet_private);
-			free (dev);
-			return;
-		}
-		memset (ethernet_private->port_private, 0,
-			sizeof (struct mv64460_eth_priv));
-		switch (devnum) {
-		case 0:
-			ethernet_private->port_num = ETH_0;
-			break;
-		case 1:
-			ethernet_private->port_num = ETH_1;
-			break;
-		case 2:
-			ethernet_private->port_num = ETH_2;
-			break;
-		default:
-			printf ("Invalid device number %d\n", devnum);
-			break;
-		};
-
-		port_private->port_num = devnum;
-		/*
-		 * Read MIB counter on the GT in order to reset them,
-		 * then zero all the stats fields in memory
-		 */
-		mv64460_eth_update_stat (dev);
-		memset (port_private->stats, 0,
-			sizeof (struct net_device_stats));
-		/* Extract the MAC address from the environment */
-		switch (devnum) {
-		case 0:
-			s = "ethaddr";
-			break;
-		case 1:
-			s = "eth1addr";
-			break;
-		case 2:
-			s = "eth2addr";
-			break;
-		default:	/* this should never happen */
-			printf ("%s: Invalid device number %d\n",
-				__FUNCTION__, devnum);
-			return;
-		}
-
-		temp = getenv_r (s, buf, sizeof (buf));
-		s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
-		printf ("Setting MAC %d to %s\n", devnum, s);
-#endif
-		for (x = 0; x < 6; ++x) {
-			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-
-		DP (printf ("Allocating descriptor and buffer rings\n"));
-
-		ethernet_private->p_rx_desc_area_base[0] =
-			(ETH_RX_DESC *) memalign (16,
-						  RX_DESC_ALIGNED_SIZE *
-						  MV64460_RX_QUEUE_SIZE + 1);
-		ethernet_private->p_tx_desc_area_base[0] =
-			(ETH_TX_DESC *) memalign (16,
-						  TX_DESC_ALIGNED_SIZE *
-						  MV64460_TX_QUEUE_SIZE + 1);
-
-		ethernet_private->p_rx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64460_RX_QUEUE_SIZE *
-					   MV64460_TX_BUFFER_SIZE + 1);
-		ethernet_private->p_tx_buffer_base[0] =
-			(char *) memalign (16,
-					   MV64460_RX_QUEUE_SIZE *
-					   MV64460_TX_BUFFER_SIZE + 1);
-
-#ifdef DEBUG_MV_ETH
-		/* DEBUG OUTPUT prints adresses of globals */
-		print_globals (dev);
-#endif
-		eth_register (dev);
-
-		miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write);
-	}
-	DP (printf ("%s: exit\n", __FUNCTION__));
-
-}
-
-/**********************************************************************
- * mv64460_eth_open
- *
- * This function is called when openning the network device. The function
- * should initialize all the hardware, initialize cyclic Rx/Tx
- * descriptors chain and buffers and allocate an IRQ to the network
- * device.
- *
- * Input : a pointer to the network device structure
- * / / ronen - changed the output to match  net/eth.c needs
- * Output : nonzero of success , zero if fails.
- * under construction
- **********************************************************************/
-
-int mv64460_eth_open (struct eth_device *dev)
-{
-	return (mv64460_eth_real_open (dev));
-}
-
-/* Helper function for mv64460_eth_open */
-static int mv64460_eth_real_open (struct eth_device *dev)
-{
-
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	u32 port_status;
-	ushort reg_short;
-	int speed;
-	int duplex;
-	int i;
-	int reg;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	/* ronen - when we update the MAC env params we only update dev->enetaddr
-	   see ./net/eth.c eth_set_enetaddr() */
-	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
-
-	port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00);
-
-	/* Clear the ethernet port interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-
-	/* Unmask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL);
-
-	/* Unmask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
-		      INT_CAUSE_UNMASK_ALL_EXT);
-
-	/* Set phy address of the port */
-	ethernet_private->port_phy_addr = 0x1 + (port_num << 1);
-	reg = ethernet_private->port_phy_addr;
-
-	/* Activate the DMA channels etc */
-	eth_port_init (ethernet_private);
-
-	/* "Allocate" setup TX rings */
-
-	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
-		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
-		ethernet_private->tx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
-			0, ethernet_private->tx_desc_area_size[queue]);
-
-		/* initialize tx desc ring with low level driver */
-		if (ether_init_tx_desc_ring
-		    (ethernet_private, ETH_Q0,
-		     port_private->tx_ring_size[queue],
-		     MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		     (unsigned int) ethernet_private->
-		     p_tx_desc_area_base[queue],
-		     (unsigned int) ethernet_private->
-		     p_tx_buffer_base[queue]) == false)
-			printf ("### Error initializing TX Ring\n");
-	}
-
-	/* "Allocate" setup RX rings */
-	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
-		unsigned int size;
-
-		/* Meantime RX Ring are fixed - but must be configurable by user */
-		port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
-		size = (port_private->rx_ring_size[queue] *
-			RX_DESC_ALIGNED_SIZE);
-		ethernet_private->rx_desc_area_size[queue] = size;
-
-		/* first clear desc area completely */
-		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
-			0, ethernet_private->rx_desc_area_size[queue]);
-		if ((ether_init_rx_desc_ring
-		     (ethernet_private, ETH_Q0,
-		      port_private->rx_ring_size[queue],
-		      MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
-		      (unsigned int) ethernet_private->
-		      p_rx_desc_area_base[queue],
-		      (unsigned int) ethernet_private->
-		      p_rx_buffer_base[queue])) == false)
-			printf ("### Error initializing RX Ring\n");
-	}
-
-	eth_port_start (ethernet_private);
-
-	/* Set maximum receive buffer to 9700 bytes */
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
-		      (0x5 << 17) |
-		      (MV_REG_READ
-		       (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
-		       & 0xfff1ffff));
-
-	/*
-	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
-	 * disable the leaky bucket mechanism .
-	 */
-
-	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
-	port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
-
-#if defined(CONFIG_PHY_RESET)
-	/*
-	 * Reset the phy, only if its the first time through
-	 * otherwise, just check the speeds & feeds
-	 */
-	if (port_private->first_init == 0) {
-		port_private->first_init = 1;
-		ethernet_phy_reset (port_num);
-
-		/* Start/Restart autonegotiation */
-		phy_setup_aneg (dev->name, reg);
-		udelay (1000);
-	}
-#endif /* defined(CONFIG_PHY_RESET) */
-
-	miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
-
-	/*
-	 * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
-	 */
-	if ((reg_short & PHY_BMSR_AUTN_ABLE)
-	    && !(reg_short & PHY_BMSR_AUTN_COMP)) {
-		puts ("Waiting for PHY auto negotiation to complete");
-		i = 0;
-		while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
-			/*
-			 * Timeout reached ?
-			 */
-			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts (" TIMEOUT !\n");
-				break;
-			}
-
-			if ((i++ % 1000) == 0) {
-				putc ('.');
-			}
-			udelay (1000);	/* 1 ms */
-			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
-
-		}
-		puts (" done\n");
-		udelay (500000);	/* another 500 ms (results in faster booting) */
-	}
-
-	speed = miiphy_speed (dev->name, reg);
-	duplex = miiphy_duplex (dev->name, reg);
-
-	printf ("ENET Speed is %d Mbps - %s duplex connection\n",
-		(int) speed, (duplex == HALF) ? "HALF" : "FULL");
-
-	port_private->eth_running = MAGIC_ETH_RUNNING;
-	return 1;
-}
-
-static int mv64460_eth_free_tx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop Tx Queues */
-	MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free TX rings */
-	DP (printf ("Clearing previously allocated TX queues... "));
-	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
-		/* Free on TX rings */
-		for (p_tx_curr_desc =
-		     ethernet_private->p_tx_desc_area_base[queue];
-		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
-		      ethernet_private->p_tx_desc_area_base[queue] +
-		      ethernet_private->tx_desc_area_size[queue]);
-		     p_tx_curr_desc =
-		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
-				      TX_DESC_ALIGNED_SIZE)) {
-			/* this is inside for loop */
-			if (p_tx_curr_desc->return_info != 0) {
-				p_tx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-static int mv64460_eth_free_rx_rings (struct eth_device *dev)
-{
-	unsigned int queue;
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Stop RX Queues */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
-		      0x0000ff00);
-
-	/* Free RX rings */
-	DP (printf ("Clearing previously allocated RX queues... "));
-	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
-		/* Free preallocated skb's on RX rings */
-		for (p_rx_curr_desc =
-		     ethernet_private->p_rx_desc_area_base[queue];
-		     (((unsigned int) p_rx_curr_desc <
-		       ((unsigned int) ethernet_private->
-			p_rx_desc_area_base[queue] +
-			ethernet_private->rx_desc_area_size[queue])));
-		     p_rx_curr_desc =
-		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
-				      RX_DESC_ALIGNED_SIZE)) {
-			if (p_rx_curr_desc->return_info != 0) {
-				p_rx_curr_desc->return_info = 0;
-				DP (printf ("freed\n"));
-			}
-		}
-		DP (printf ("Done\n"));
-	}
-	return 0;
-}
-
-/**********************************************************************
- * mv64460_eth_stop
- *
- * This function is used when closing the network device.
- * It updates the hardware,
- * release all memory that holds buffers and descriptors and release the IRQ.
- * Input : a pointer to the device structure
- * Output : zero if success , nonzero if fails
- *********************************************************************/
-
-int mv64460_eth_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	/* Disable all gigE address decoder */
-	MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
-	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
-	mv64460_eth_real_stop (dev);
-
-	return 0;
-};
-
-/* Helper function for mv64460_eth_stop */
-
-static int mv64460_eth_real_stop (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	mv64460_eth_free_tx_rings (dev);
-	mv64460_eth_free_rx_rings (dev);
-
-	eth_port_reset (ethernet_private->port_num);
-	/* Disable ethernet port interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
-	/* Mask RX buffer and TX end interrupt */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
-	/* Mask phy and link status changes interrupts */
-	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
-	MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
-			   BIT0 << port_num);
-	/* Print Network statistics */
-#ifndef	 UPDATE_STATS_BY_SOFTWARE
-	/*
-	 * Print statistics (only if ethernet is running),
-	 * then zero all the stats fields in memory
-	 */
-	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
-		port_private->eth_running = 0;
-		mv64460_eth_print_stat (dev);
-	}
-	memset (port_private->stats, 0, sizeof (struct net_device_stats));
-#endif
-	DP (printf ("\nEthernet stopped ... \n"));
-	return 0;
-}
-
-/**********************************************************************
- * mv64460_eth_start_xmit
- *
- * This function is queues a packet in the Tx descriptor for
- * required port.
- *
- * Input : skb - a pointer to socket buffer
- *	   dev - a pointer to the required port
- *
- * Output : zero upon success
- **********************************************************************/
-
-int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
-		      int dataSize)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	ETH_FUNC_RET_STATUS status;
-	struct net_device_stats *stats;
-	ETH_FUNC_RET_STATUS release_result;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	stats = port_private->stats;
-
-	/* Update packet info data structure */
-	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
-	pkt_info.byte_cnt = dataSize;
-	pkt_info.buf_ptr = (unsigned int) dataPtr;
-	pkt_info.return_info = 0;
-
-	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
-	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
-		printf ("Error on transmitting packet ..");
-		if (status == ETH_QUEUE_FULL)
-			printf ("ETH Queue is full. \n");
-		if (status == ETH_QUEUE_LAST_RESOURCE)
-			printf ("ETH Queue: using last available resource. \n");
-		return 1;
-	}
-
-	/* Update statistics and start of transmittion time */
-	stats->tx_bytes += dataSize;
-	stats->tx_packets++;
-
-	/* Check if packet(s) is(are) transmitted correctly (release everything) */
-	do {
-		release_result =
-			eth_tx_return_desc (ethernet_private, ETH_Q0,
-					    &pkt_info);
-		switch (release_result) {
-		case ETH_OK:
-			DP (printf ("descriptor released\n"));
-			if (pkt_info.cmd_sts & BIT0) {
-				printf ("Error in TX\n");
-				stats->tx_errors++;
-			}
-			break;
-		case ETH_RETRY:
-			DP (printf ("transmission still in process\n"));
-			break;
-
-		case ETH_ERROR:
-			printf ("routine can not access Tx desc ring\n");
-			break;
-
-		case ETH_END_OF_JOB:
-			DP (printf ("the routine has nothing to release\n"));
-			break;
-		default:	/* should not happen */
-			break;
-		}
-	} while (release_result == ETH_OK);
-
-	return 0;	/* success */
-}
-
-/**********************************************************************
- * mv64460_eth_receive
- *
- * This function is forward packets that are received from the port's
- * queues toward kernel core or FastRoute them to another interface.
- *
- * Input : dev - a pointer to the required interface
- *	   max - maximum number to receive (0 means unlimted)
- *
- * Output : number of served packets
- **********************************************************************/
-
-int mv64460_eth_receive (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-	PKT_INFO pkt_info;
-	struct net_device_stats *stats;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) {
-#ifdef DEBUG_MV_ETH
-		if (pkt_info.byte_cnt != 0) {
-			printf ("%s: Received %d byte Packet @ 0x%x\n",
-				__FUNCTION__, pkt_info.byte_cnt,
-				pkt_info.buf_ptr);
-			if(pkt_info.buf_ptr != 0){
-				for(i=0; i < pkt_info.byte_cnt; i++){
-					if((i % 4) == 0){
-						printf("\n0x");
-					}
-					printf("%02x", ((char*)pkt_info.buf_ptr)[i]);
-				}
-				printf("\n");
-			}
-		}
-#endif
-		/* Update statistics. Note byte count includes 4 byte CRC count */
-		stats->rx_packets++;
-		stats->rx_bytes += pkt_info.byte_cnt;
-
-		/*
-		 * In case received a packet without first / last bits on OR the error
-		 * summary bit is on, the packets needs to be dropeed.
-		 */
-		if (((pkt_info.
-		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
-		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
-		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
-			stats->rx_dropped++;
-
-			printf ("Received packet spread on multiple descriptors\n");
-
-			/* Is this caused by an error ? */
-			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
-				stats->rx_errors++;
-			}
-
-			/* free these descriptors again without forwarding them to the higher layers */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX Desc returned to Ring\n"));
-			}
-			/* /free these descriptors again */
-		} else {
-
-/* !!! call higher layer processing */
-#ifdef DEBUG_MV_ETH
-			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
-#endif
-			/* let the upper layer handle the packet */
-			NetReceive ((uchar *) pkt_info.buf_ptr,
-				    (int) pkt_info.byte_cnt);
-
-/* **************************************************************** */
-/* free descriptor  */
-			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
-			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
-			DP (printf ("RX: pkt_info.buf_ptr =	%x\n", pkt_info.buf_ptr));
-			if (eth_rx_return_buff
-			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
-				printf ("Error while returning the RX Desc to Ring\n");
-			} else {
-				DP (printf ("RX: Desc returned to Ring\n"));
-			}
-
-/* **************************************************************** */
-
-		}
-	}
-	mv64460_eth_get_stats (dev);	/* update statistics */
-	return 1;
-}
-
-/**********************************************************************
- * mv64460_eth_get_stats
- *
- * Returns a pointer to the interface statistics.
- *
- * Input : dev - a pointer to the required interface
- *
- * Output : a pointer to the interface's statistics
- **********************************************************************/
-
-static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-
-	mv64460_eth_update_stat (dev);
-
-	return port_private->stats;
-}
-
-/**********************************************************************
- * mv64460_eth_update_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64460_eth_update_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-	volatile unsigned int dummy;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	stats->rx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_RECEIVED);
-	stats->tx_packets += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_FRAMES_SENT);
-	stats->rx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
-	/*
-	 * Ideally this should be as follows -
-	 *
-	 *   stats->rx_bytes   += stats->rx_bytes +
-	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
-	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
-	 *
-	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
-	 * is just a dummy read for proper work of the GigE port
-	 */
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
-	stats->tx_bytes += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
-	dummy = eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
-	stats->rx_errors += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MAC_RECEIVE_ERROR);
-
-	/* Rx dropped is for received packet with CRC error */
-	stats->rx_dropped +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_BAD_CRC_EVENT);
-	stats->multicast += (unsigned long)
-		eth_read_mib_counter (ethernet_private->port_num,
-				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
-	stats->collisions +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_COLLISION) +
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_LATE_COLLISION);
-	/* detailed rx errors */
-	stats->rx_length_errors +=
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_UNDERSIZE_RECEIVED)
-		+
-		(unsigned long) eth_read_mib_counter (ethernet_private->
-						      port_num,
-						      ETH_MIB_OVERSIZE_RECEIVED);
-	/* detailed tx errors */
-}
-
-#ifndef	 UPDATE_STATS_BY_SOFTWARE
-/**********************************************************************
- * mv64460_eth_print_stat
- *
- * Update the statistics structure in the private data structure
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- **********************************************************************/
-
-static void mv64460_eth_print_stat (struct eth_device *dev)
-{
-	ETH_PORT_INFO *ethernet_private;
-	struct mv64460_eth_priv *port_private;
-	struct net_device_stats *stats;
-	unsigned int port_num;
-
-	ethernet_private = (ETH_PORT_INFO *) dev->priv;
-	port_private =
-		(struct mv64460_eth_priv *) ethernet_private->port_private;
-	port_num = port_private->port_num;
-	stats = port_private->stats;
-
-	/* These are false updates */
-	printf ("\n### Network statistics: ###\n");
-	printf ("--------------------------\n");
-	printf (" Packets received:		%ld\n", stats->rx_packets);
-	printf (" Packets send:			%ld\n", stats->tx_packets);
-	printf (" Received bytes:		%ld\n", stats->rx_bytes);
-	printf (" Send bytes:			%ld\n", stats->tx_bytes);
-	if (stats->rx_errors != 0)
-		printf (" Rx Errors:			%ld\n",
-			stats->rx_errors);
-	if (stats->rx_dropped != 0)
-		printf (" Rx dropped (CRC Errors):	%ld\n",
-			stats->rx_dropped);
-	if (stats->multicast != 0)
-		printf (" Rx mulicast frames:		%ld\n",
-			stats->multicast);
-	if (stats->collisions != 0)
-		printf (" No. of collisions:		%ld\n",
-			stats->collisions);
-	if (stats->rx_length_errors != 0)
-		printf (" Rx length errors:		%ld\n",
-			stats->rx_length_errors);
-}
-#endif
-
-/**************************************************************************
- *network_start - Network Kick Off Routine UBoot
- *Inputs :
- *Outputs :
- **************************************************************************/
-
-bool db64460_eth_start (struct eth_device *dev)
-{
-	return (mv64460_eth_open (dev));	/* calls real open */
-}
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-/*
- * based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-/********************************************************************************
- * Marvell's Gigabit Ethernet controller low level driver
- *
- * DESCRIPTION:
- *	 This file introduce low level API to Marvell's Gigabit Ethernet
- *		controller. This Gigabit Ethernet Controller driver API controls
- *		1) Operations (i.e. port init, start, reset etc').
- *		2) Data flow (i.e. port send, receive etc').
- *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
- *		struct.
- *		This struct includes user configuration information as well as
- *		driver internal data needed for its operations.
- *
- *		Supported Features:
- *		- This low level driver is OS independent. Allocating memory for
- *		  the descriptor rings and buffers are not within the scope of
- *		  this driver.
- *		- The user is free from Rx/Tx queue managing.
- *		- This low level driver introduce functionality API that enable
- *		  the to operate Marvell's Gigabit Ethernet Controller in a
- *		  convenient way.
- *		- Simple Gigabit Ethernet port operation API.
- *		- Simple Gigabit Ethernet port data flow API.
- *		- Data flow and operation API support per queue functionality.
- *		- Support cached descriptors for better performance.
- *		- Enable access to all four DRAM banks and internal SRAM memory
- *		  spaces.
- *		- PHY access and control API.
- *		- Port control register configuration API.
- *		- Full control over Unicast and Multicast MAC configurations.
- *
- *		Operation flow:
- *
- *		Initialization phase
- *		This phase complete the initialization of the ETH_PORT_INFO
- *		struct.
- *		User information regarding port configuration has to be set
- *		prior to calling the port initialization routine. For example,
- *		the user has to assign the port_phy_addr field which is board
- *		depended parameter.
- *		In this phase any port Tx/Rx activity is halted, MIB counters
- *		are cleared, PHY address is set according to user parameter and
- *		access to DRAM and internal SRAM memory spaces.
- *
- *		Driver ring initialization
- *		Allocating memory for the descriptor rings and buffers is not
- *		within the scope of this driver. Thus, the user is required to
- *		allocate memory for the descriptors ring and buffers. Those
- *		memory parameters are used by the Rx and Tx ring initialization
- *		routines in order to curve the descriptor linked list in a form
- *		of a ring.
- *		Note: Pay special attention to alignment issues when using
- *		cached descriptors/buffers. In this phase the driver store
- *		information in the ETH_PORT_INFO struct regarding each queue
- *		ring.
- *
- *		Driver start
- *		This phase prepares the Ethernet port for Rx and Tx activity.
- *		It uses the information stored in the ETH_PORT_INFO struct to
- *		initialize the various port registers.
- *
- *		Data flow:
- *		All packet references to/from the driver are done using PKT_INFO
- *		struct.
- *		This struct is a unified struct used with Rx and Tx operations.
- *		This way the user is not required to be familiar with neither
- *		Tx nor Rx descriptors structures.
- *		The driver's descriptors rings are management by indexes.
- *		Those indexes controls the ring resources and used to indicate
- *		a SW resource error:
- *		'current'
- *		This index points to the current available resource for use. For
- *		example in Rx process this index will point to the descriptor
- *		that will be passed to the user upon calling the receive routine.
- *		In Tx process, this index will point to the descriptor
- *		that will be assigned with the user packet info and transmitted.
- *		'used'
- *		This index points to the descriptor that need to restore its
- *		resources. For example in Rx process, using the Rx buffer return
- *		API will attach the buffer returned in packet info to the
- *		descriptor pointed by 'used'. In Tx process, using the Tx
- *		descriptor return will merely return the user packet info with
- *		the command status of  the transmitted buffer pointed by the
- *		'used' index. Nevertheless, it is essential to use this routine
- *		to update the 'used' index.
- *		'first'
- *		This index supports Tx Scatter-Gather. It points to the first
- *		descriptor of a packet assembled of multiple buffers. For example
- *		when in middle of Such packet we have a Tx resource error the
- *		'curr' index get the value of 'first' to indicate that the ring
- *		returned to its state before trying to transmit this packet.
- *
- *		Receive operation:
- *		The eth_port_receive API set the packet information struct,
- *		passed by the caller, with received information from the
- *		'current' SDMA descriptor.
- *		It is the user responsibility to return this resource back
- *		to the Rx descriptor ring to enable the reuse of this source.
- *		Return Rx resource is done using the eth_rx_return_buff API.
- *
- *		Transmit operation:
- *		The eth_port_send API supports Scatter-Gather which enables to
- *		send a packet spanned over multiple buffers. This means that
- *		for each packet info structure given by the user and put into
- *		the Tx descriptors ring, will be transmitted only if the 'LAST'
- *		bit will be set in the packet info command status field. This
- *		API also consider restriction regarding buffer alignments and
- *		sizes.
- *		The user must return a Tx resource after ensuring the buffer
- *		has been transmitted to enable the Tx ring indexes to update.
- *
- *		BOARD LAYOUT
- *		This device is on-board.  No jumper diagram is necessary.
- *
- *		EXTERNAL INTERFACE
- *
- *	 Prior to calling the initialization routine eth_port_init() the user
- *	 must set the following fields under ETH_PORT_INFO struct:
- *	 port_num	      User Ethernet port number.
- *	 port_phy_addr		    User PHY address of Ethernet port.
- *	 port_mac_addr[6]	    User defined port MAC address.
- *	 port_config	      User port configuration value.
- *	 port_config_extend    User port config extend value.
- *	 port_sdma_config      User port SDMA config value.
- *	 port_serial_control   User port serial control value.
- *	 *port_virt_to_phys ()	User function to cast virtual addr to CPU bus addr.
- *	 *port_private	      User scratch pad for user specific data structures.
- *
- *	 This driver introduce a set of default values:
- *	 PORT_CONFIG_VALUE	     Default port configuration value
- *	 PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
- *	 PORT_SDMA_CONFIG_VALUE	     Default sdma control value
- *	 PORT_SERIAL_CONTROL_VALUE   Default port serial control value
- *
- *		This driver data flow is done using the PKT_INFO struct which is
- *		a unified struct for Rx and Tx operations:
- *		byte_cnt	Tx/Rx descriptor buffer byte count.
- *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
- *		cmd_sts		Tx/Rx descriptor command status.
- *		buf_ptr		Tx/Rx descriptor buffer pointer.
- *		return_info	Tx/Rx user resource return information.
- *
- *
- *		EXTERNAL SUPPORT REQUIREMENTS
- *
- *		This driver requires the following external support:
- *
- *		D_CACHE_FLUSH_LINE (address, address offset)
- *
- *		This macro applies assembly code to flush and invalidate cache
- *		line.
- *		address	       - address base.
- *		address offset - address offset
- *
- *
- *		CPU_PIPE_FLUSH
- *
- *		This macro applies assembly code to flush the CPU pipeline.
- *
- *******************************************************************************/
-/* includes */
-
-/* defines */
-/* SDMA command macros */
-#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
-
-#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
- MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
- (1 << (8 + tx_queue)))
-
-#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
-
-#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
-MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
-
-#define CURR_RFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
-
-#define CURR_RFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_RFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
-
-#define USED_RFD_SET(p_used_desc, queue)\
-(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
-
-
-#define CURR_TFD_GET(p_curr_desc, queue) \
- ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
-
-#define CURR_TFD_SET(p_curr_desc, queue) \
- (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
-
-#define USED_TFD_GET(p_used_desc, queue) \
- ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
-
-#define USED_TFD_SET(p_used_desc, queue) \
- (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
-
-#define FIRST_TFD_GET(p_first_desc, queue) \
- ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
-
-#define FIRST_TFD_SET(p_first_desc, queue) \
- (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
-
-
-/* Macros that save access to desc in order to find next desc pointer  */
-#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
-
-#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
-
-#define LINK_UP_TIMEOUT		100000
-#define PHY_BUSY_TIMEOUT    10000000
-
-/* locals */
-
-/* PHY routines */
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
-static int ethernet_phy_get (ETH_PORT eth_port_num);
-
-/* Ethernet Port routines */
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param);
-static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option);
-
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count);
-
-void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
-
-
-typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
-u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_dram_bank_size (MEMORY_BANK bank)
-{
-	u32 result = 0;
-	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
-
-	if (enable & (1 << bank))
-		return 0;
-	if (bank == BANK0)
-		result = MV_REG_READ (MV64460_CS_0_SIZE);
-	if (bank == BANK1)
-		result = MV_REG_READ (MV64460_CS_1_SIZE);
-	if (bank == BANK2)
-		result = MV_REG_READ (MV64460_CS_2_SIZE);
-	if (bank == BANK3)
-		result = MV_REG_READ (MV64460_CS_3_SIZE);
-	result += 1;
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-u32 mv_get_internal_sram_base (void)
-{
-	u32 result;
-
-	result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
-	result &= 0x0000ffff;
-	result = result << 16;
-	return result;
-}
-
-/*******************************************************************************
-* eth_port_init - Initialize the Ethernet port driver
-*
-* DESCRIPTION:
-*	This function prepares the ethernet port to start its activity:
-*	1) Completes the ethernet port driver struct initialization toward port
-*	    start routine.
-*	2) Resets the device to a quiescent state in case of warm reboot.
-*	3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
-*	4) Clean MAC tables. The reset status of those tables is unknown.
-*	5) Set PHY address.
-*	Note: Call this routine prior to eth_port_start routine and after setting
-*	user values in the user fields of Ethernet port control struct (i.e.
-*	port_phy_addr).
-*
-* INPUT:
-*	ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*	See description.
-*
-* RETURN:
-*	None.
-*
-*******************************************************************************/
-static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	ETH_WIN_PARAM win_param;
-
-	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
-	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
-	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
-	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
-
-	p_eth_port_ctrl->port_rx_queue_command = 0;
-	p_eth_port_ctrl->port_tx_queue_command = 0;
-
-	/* Zero out SW structs */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->rx_resource_err[queue] = false;
-	}
-
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
-		p_eth_port_ctrl->tx_resource_err[queue] = false;
-	}
-
-	eth_port_reset (p_eth_port_ctrl->port_num);
-
-	/* Set access parameters for DRAM bank 0 */
-	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR	*/
-	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
-	win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 1 */
-	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
-	win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 2 */
-	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
-	win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for DRAM bank 3 */
-	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
-	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
-	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
-#ifndef CONFIG_NOT_COHERENT_CACHE
-	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
-#endif
-	win_param.high_addr = 0;
-	/* Get bank base */
-	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
-	win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
-	if (win_param.size == 0)
-		win_param.enable = 0;
-	else
-		win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	/* Set access parameters for Internal SRAM */
-	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
-	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
-	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
-	win_param.high_addr = 0;
-	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
-	win_param.size = MV64460_INTERNAL_SRAM_SIZE;	/* Get bank size */
-	win_param.enable = 1;	/* Enable the access */
-	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
-
-	/* Set the access control for address window (EPAPR) READ & WRITE */
-	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
-
-	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
-
-	ethernet_phy_set (p_eth_port_ctrl->port_num,
-			  p_eth_port_ctrl->port_phy_addr);
-
-	return;
-
-}
-
-/*******************************************************************************
-* eth_port_start - Start the Ethernet port activity.
-*
-* DESCRIPTION:
-*	This routine prepares the Ethernet port for Rx and Tx activity:
-*	1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
-*	    has been initialized a descriptor's ring (using ether_init_tx_desc_ring
-*	    for Tx and ether_init_rx_desc_ring for Rx)
-*	2. Initialize and enable the Ethernet configuration port by writing to
-*	    the port's configuration and command registers.
-*	3. Initialize and enable the SDMA by writing to the SDMA's
-*    configuration and command registers.
-*	After completing these steps, the ethernet port SDMA can starts to
-*	perform Rx and Tx activities.
-*
-*	Note: Each Rx and Tx queue descriptor's list must be initialized prior
-*	to calling this function (use ether_init_tx_desc_ring for Tx queues and
-*	ether_init_rx_desc_ring for Rx queues).
-*
-* INPUT:
-*	ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
-*
-* OUTPUT:
-*	Ethernet port is ready to receive and transmit.
-*
-* RETURN:
-*	false if the port PHY is not up.
-*	true otherwise.
-*
-*******************************************************************************/
-static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
-{
-	int queue;
-	volatile ETH_TX_DESC *p_tx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	unsigned int phy_reg_data;
-	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
-
-	/* Assignment of Tx CTRP of given queue */
-	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
-		CURR_TFD_GET (p_tx_curr_desc, queue);
-		MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_tx_curr_desc));
-
-	}
-
-	/* Assignment of Rx CRDP of given queue */
-	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
-		CURR_RFD_GET (p_rx_curr_desc, queue);
-		MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
-			       (eth_port_num)
-			       + (4 * queue)),
-			      ((unsigned int) p_rx_curr_desc));
-
-		if (p_rx_curr_desc != NULL)
-			/* Add the assigned Ethernet address to the port's address table */
-			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
-					      p_eth_port_ctrl->port_mac_addr,
-					      queue);
-	}
-
-	/* Assign port configuration and command. */
-	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config);
-
-	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_config_extend);
-
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      p_eth_port_ctrl->port_serial_control);
-
-	MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-			 ETH_SERIAL_PORT_ENABLE);
-
-	/* Assign port SDMA configuration */
-	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
-		      p_eth_port_ctrl->port_sdma_config);
-
-	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
-		      (eth_port_num), 0x3fffffff);
-	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
-		      (eth_port_num), 0x03fffcff);
-	/* Turn off the port/queue bandwidth limitation */
-	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
-
-	/* Enable port Rx. */
-	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
-		      p_eth_port_ctrl->port_rx_queue_command);
-
-	/* Check if link is up */
-	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-	if (!(phy_reg_data & 0x20))
-		return false;
-
-	return true;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr_set - This function Set the port Unicast address.
-*
-* DESCRIPTION:
-*		This function Set the port Ethernet MAC address.
-*
-* INPUT:
-*	ETH_PORT eth_port_num	  Port number.
-*	char *	      p_addr		Address to be set
-*	ETH_QUEUE	  queue		Rx queue number for this MAC address.
-*
-* OUTPUT:
-*	Set MAC address low and high registers. also calls eth_port_uc_addr()
-*	To set the unicast table with the proper information.
-*
-* RETURN:
-*	N/A.
-*
-*******************************************************************************/
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr, ETH_QUEUE queue)
-{
-	unsigned int mac_h;
-	unsigned int mac_l;
-
-	mac_l = (p_addr[4] << 8) | (p_addr[5]);
-	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
-		(p_addr[2] << 8) | (p_addr[3] << 0);
-
-	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
-	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
-
-	/* Accept frames of this address */
-	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
-
-	return;
-}
-
-/*******************************************************************************
-* eth_port_uc_addr - This function Set the port unicast address table
-*
-* DESCRIPTION:
-*	This function locates the proper entry in the Unicast table for the
-*	specified MAC nibble and sets its properties according to function
-*	parameters.
-*
-* INPUT:
-*	ETH_PORT	eth_port_num	  Port number.
-*	unsigned char uc_nibble		Unicast MAC Address last nibble.
-*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
-*	int			option	    0 = Add, 1 = remove address.
-*
-* OUTPUT:
-*	This function add/removes MAC addresses from the port unicast address
-*	table.
-*
-* RETURN:
-*	true is output succeeded.
-*	false if option parameter is invalid.
-*
-*******************************************************************************/
-static bool eth_port_uc_addr (ETH_PORT eth_port_num,
-			      unsigned char uc_nibble,
-			      ETH_QUEUE queue, int option)
-{
-	unsigned int unicast_reg;
-	unsigned int tbl_offset;
-	unsigned int reg_offset;
-
-	/* Locate the Unicast table entry */
-	uc_nibble = (0xf & uc_nibble);
-	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
-	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
-
-	switch (option) {
-	case REJECT_MAC_ADDR:
-		/* Clear accepts frame bit at specified unicast DA table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg &= (0x0E << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-		break;
-
-	case ACCEPT_MAC_ADDR:
-		/* Set accepts frame bit at unicast DA filter table entry */
-		unicast_reg =
-			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-				      (eth_port_num)
-				      + tbl_offset));
-
-		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
-
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num)
-			       + tbl_offset), unicast_reg);
-
-		break;
-
-	default:
-		return false;
-	}
-	return true;
-}
-
-
-/*******************************************************************************
-* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
-*
-* DESCRIPTION:
-*	Go through all the DA filter tables (Unicast, Special Multicast & Other
-*	Multicast) and set each entry to 0.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*	Multicast and Unicast packets are rejected.
-*
-* RETURN:
-*	None.
-*
-*******************************************************************************/
-static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
-{
-	int table_index;
-
-	/* Clear DA filter unicast table (Ex_dFUT) */
-	for (table_index = 0; table_index <= 0xC; table_index += 4)
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
-			       (eth_port_num) + table_index), 0);
-
-	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
-		/* Clear DA filter special multicast table (Ex_dFSMT) */
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-		/* Clear DA filter other multicast table (Ex_dFOMT) */
-		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
-	}
-}
-
-/*******************************************************************************
-* eth_clear_mib_counters - Clear all MIB counters
-*
-* DESCRIPTION:
-*	This function clears all MIB counters of a specific ethernet port.
-*	A read from the MIB counter will reset the counter.
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*	After reading all MIB counters, the counters resets.
-*
-* RETURN:
-*	MIB counter value.
-*
-*******************************************************************************/
-static void eth_clear_mib_counters (ETH_PORT eth_port_num)
-{
-	int i;
-	unsigned int dummy;
-
-	/* Perform dummy reads from MIB counters */
-	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
-	     i += 4)
-		dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
-				      (eth_port_num) + i));
-
-	return;
-}
-
-/*******************************************************************************
-* eth_read_mib_counter - Read a MIB counter
-*
-* DESCRIPTION:
-*	This function reads a MIB counter of a specific ethernet port.
-*	NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
-*	following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
-*	register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
-*	ETH_MIB_GOOD_OCTETS_SENT_HIGH
-*
-* INPUT:
-*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
-*	unsigned int mib_offset	  MIB counter offset (use ETH_MIB_... macros).
-*
-* OUTPUT:
-*	After reading the MIB counter, the counter resets.
-*
-* RETURN:
-*	MIB counter value.
-*
-*******************************************************************************/
-unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
-				   unsigned int mib_offset)
-{
-	return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
-			     + mib_offset));
-}
-
-/*******************************************************************************
-* ethernet_phy_set - Set the ethernet port PHY address.
-*
-* DESCRIPTION:
-*	This routine set the ethernet port PHY address according to given
-*	parameter.
-*
-* INPUT:
-*		ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
-*
-* OUTPUT:
-*	Set PHY Address Register with given PHY address parameter.
-*
-* RETURN:
-*	None.
-*
-*******************************************************************************/
-static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
-
-	reg_data &= ~(0x1F << (5 * eth_port_num));
-	reg_data |= (phy_addr << (5 * eth_port_num));
-
-	MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
-
-	return;
-}
-
-/*******************************************************************************
- * ethernet_phy_get - Get the ethernet port PHY address.
- *
- * DESCRIPTION:
- *	 This routine returns the given ethernet port PHY address.
- *
- * INPUT:
- *		ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *	 None.
- *
- * RETURN:
- *	 PHY address.
- *
- *******************************************************************************/
-static int ethernet_phy_get (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
-
-	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
-}
-
-/***********************************************************/
-/* (Re)start autonegotiation				   */
-/***********************************************************/
-int phy_setup_aneg (char *devname, unsigned char addr)
-{
-	unsigned short ctl, adv;
-
-	/* Setup standard advertise */
-	miiphy_read (devname, addr, PHY_ANAR, &adv);
-	adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
-		PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
-		PHY_ANLPAR_10);
-	miiphy_write (devname, addr, PHY_ANAR, adv);
-
-	miiphy_read (devname, addr, PHY_1000BTCR, &adv);
-	adv |= (0x0300);
-	miiphy_write (devname, addr, PHY_1000BTCR, adv);
-
-	/* Start/Restart aneg */
-	miiphy_read (devname, addr, PHY_BMCR, &ctl);
-	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-	miiphy_write (devname, addr, PHY_BMCR, ctl);
-
-	return 0;
-}
-
-/*******************************************************************************
- * ethernet_phy_reset - Reset Ethernet port PHY.
- *
- * DESCRIPTION:
- *	 This routine utilize the SMI interface to reset the ethernet port PHY.
- *	 The routine waits until the link is up again or link up is timeout.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *	 The ethernet port PHY renew its link.
- *
- * RETURN:
- *	 None.
- *
- *******************************************************************************/
-static bool ethernet_phy_reset (ETH_PORT eth_port_num)
-{
-	unsigned int time_out = 50;
-	unsigned int phy_reg_data;
-
-	eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data);
-	phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */
-	eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data);
-
-	/* Reset the PHY */
-	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
-	phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
-	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
-
-	/* Poll on the PHY LINK */
-	do {
-		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
-
-		if (time_out-- == 0)
-			return false;
-	}
-	while (!(phy_reg_data & 0x20));
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_reset - Reset Ethernet port
- *
- * DESCRIPTION:
- *	This routine resets the chip by aborting any SDMA engine activity and
- *	clearing the MIB counters. The Receiver and the Transmit unit are in
- *	idle state after this command is performed and the port is disabled.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *
- * OUTPUT:
- *	 Channel activity is halted.
- *
- * RETURN:
- *	 None.
- *
- *******************************************************************************/
-static void eth_port_reset (ETH_PORT eth_port_num)
-{
-	unsigned int reg_data;
-
-	/* Stop Tx port activity. Check port Tx activity. */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Tx activity to terminate. */
-		do {
-			/* Check port cause register that all Tx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-	/* Stop Rx port activity. Check port Rx activity. */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-			     (eth_port_num));
-
-	if (reg_data & 0xFF) {
-		/* Issue stop command for active channels only */
-		MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-			      (eth_port_num), (reg_data << 8));
-
-		/* Wait for all Rx activity to terminate. */
-		do {
-			/* Check port cause register that all Rx queues are stopped */
-			reg_data =
-				MV_REG_READ
-				(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
-				 (eth_port_num));
-		}
-		while (reg_data & 0xFF);
-	}
-
-	/* Clear all MIB counters */
-	eth_clear_mib_counters (eth_port_num);
-
-	/* Reset the Enable bit in the Configuration Register */
-	reg_data =
-		MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
-			     (eth_port_num));
-	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
-	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
-		      reg_data);
-
-	return;
-}
-
-
-
-
-/*******************************************************************************
- * eth_port_read_smi_reg - Read PHY registers
- *
- * DESCRIPTION:
- *	 This routine utilize the SMI interface to interact with the PHY in
- *	 order to perform PHY register read.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *	 unsigned int	phy_reg	  PHY register address offset.
- *	 unsigned int	*value	 Register value buffer.
- *
- * OUTPUT:
- *	 Write the value of a specified PHY register into given buffer.
- *
- * RETURN:
- *	 false if the PHY is busy or read data is not in valid state.
- *	 true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
-				   unsigned int phy_reg, unsigned int *value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_READ);
-
-	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
-
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
-
-	/* Wait for the data to update in the SMI register */
-#define PHY_UPDATE_TIMEOUT	10000
-	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
-
-	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-
-	*value = reg_value & 0xffff;
-
-	return true;
-}
-
-int mv_miiphy_read(char *devname, unsigned char phy_addr,
-		   unsigned char phy_reg, unsigned short *value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_READ);
-
-	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
-
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
-
-	/* Wait for the data to update in the SMI register */
-	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
-
-	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-
-	*value = reg_value & 0xffff;
-
-	return 0;
-}
-
-/*******************************************************************************
- * eth_port_write_smi_reg - Write to PHY registers
- *
- * DESCRIPTION:
- *	 This routine utilize the SMI interface to interact with the PHY in
- *	 order to perform writes to PHY registers.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *	unsigned int   phy_reg	 PHY register address offset.
- *	unsigned int	value	Register value.
- *
- * OUTPUT:
- *	Write the given value to the specified PHY register.
- *
- * RETURN:
- *	false if the PHY is busy.
- *	true otherwise.
- *
- *******************************************************************************/
-static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
-				    unsigned int phy_reg, unsigned int value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-	int phy_addr;
-
-	phy_addr = ethernet_phy_get (eth_port_num);
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-	return true;
-}
-
-int mv_miiphy_write(char *devname, unsigned char phy_addr,
-		    unsigned char phy_reg, unsigned short value)
-{
-	unsigned int reg_value;
-	unsigned int time_out = PHY_BUSY_TIMEOUT;
-
-	/* first check that it is not busy */
-	do {
-		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
-		if (time_out-- == 0) {
-			return false;
-		}
-	}
-	while (reg_value & ETH_SMI_BUSY);
-
-	/* not busy */
-	MV_REG_WRITE (MV64460_ETH_SMI_REG,
-		      (phy_addr << 16) | (phy_reg << 21) |
-		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-	return 0;
-}
-
-/*******************************************************************************
- * eth_set_access_control - Config address decode parameters for Ethernet unit
- *
- * DESCRIPTION:
- *	 This function configures the address decode parameters for the Gigabit
- *	 Ethernet Controller according the given parameters struct.
- *
- * INPUT:
- *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
- *	 ETH_WIN_PARAM	*param	 Address decode parameter struct.
- *
- * OUTPUT:
- *	 An access window is opened using the given access parameters.
- *
- * RETURN:
- *	 None.
- *
- *******************************************************************************/
-static void eth_set_access_control (ETH_PORT eth_port_num,
-				    ETH_WIN_PARAM * param)
-{
-	unsigned int access_prot_reg;
-
-	/* Set access control register */
-	access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
-				       (eth_port_num));
-	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
-	access_prot_reg |= (param->access_ctrl << (param->win * 2));
-	MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
-		      access_prot_reg);
-
-	/* Set window Size reg (SR) */
-	MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
-		       (ETH_SIZE_REG_GAP * param->win)),
-		      (((param->size / 0x10000) - 1) << 16));
-
-	/* Set window Base address reg (BA) */
-	MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
-		      (param->target | param->attributes | param->base_addr));
-	/* High address remap reg (HARR) */
-	if (param->win < 4)
-		MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
-			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
-			      param->high_addr);
-
-	/* Base address enable reg (BARER) */
-	if (param->enable == 1)
-		MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
-				   (1 << param->win));
-	else
-		MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
-				 (1 << param->win));
-}
-
-/*******************************************************************************
- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *	 This function prepares a Rx chained list of descriptors and packet
- *	 buffers in a form of a ring. The routine must be called after port
- *	 initialization routine and before port start routine.
- *	 The Ethernet SDMA engine uses CPU bus addresses to access the various
- *	 devices in the system (i.e. DRAM). This function uses the ethernet
- *	 struct 'virtual to physical' routine (set by the user) to set the ring
- *	 with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	rx_queue	 Number of Rx queue.
- *	int			rx_desc_num	  Number of Rx descriptors
- *	int			rx_buff_size	  Size of Rx buffer
- *	unsigned int	rx_desc_base_addr  Rx descriptors memory area base addr.
- *	unsigned int	rx_buff_base_addr  Rx buffer memory area base addr.
- *
- * OUTPUT:
- *	The routine updates the Ethernet port control struct with information
- *	regarding the Rx descriptors and buffers.
- *
- * RETURN:
- *	false if the given descriptors memory area is not aligned according to
- *	Ethernet SDMA specifications.
- *	true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE rx_queue,
-				     int rx_desc_num,
-				     int rx_buff_size,
-				     unsigned int rx_desc_base_addr,
-				     unsigned int rx_buff_base_addr)
-{
-	ETH_RX_DESC *p_rx_desc;
-	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
-	p_rx_prev_desc = p_rx_desc;
-	buffer_addr = rx_buff_base_addr;
-
-	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (rx_buff_base_addr & 0xF)
-		return false;
-
-	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
-		return false;
-
-	/* Rx buffers must be 64-bit aligned.	    */
-	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
-		return false;
-
-	/* initialize the Rx descriptors ring */
-	for (ix = 0; ix < rx_desc_num; ix++) {
-		p_rx_desc->buf_size = rx_buff_size;
-		p_rx_desc->byte_cnt = 0x0000;
-		p_rx_desc->cmd_sts =
-			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-		p_rx_desc->next_desc_ptr =
-			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
-		p_rx_desc->buf_ptr = buffer_addr;
-		p_rx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
-		buffer_addr += rx_buff_size;
-		p_rx_prev_desc = p_rx_desc;
-		p_rx_desc = (ETH_RX_DESC *)
-			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
-	}
-
-	/* Closing Rx descriptors ring */
-	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
-	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
-
-	/* Save Rx desc pointer to driver struct. */
-	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
-
-	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
-		(ETH_RX_DESC *) rx_desc_base_addr;
-	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
-		rx_desc_num * RX_DESC_ALIGNED_SIZE;
-
-	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- *	 This function prepares a Tx chained list of descriptors and packet
- *	 buffers in a form of a ring. The routine must be called after port
- *	 initialization routine and before port start routine.
- *	 The Ethernet SDMA engine uses CPU bus addresses to access the various
- *	 devices in the system (i.e. DRAM). This function uses the ethernet
- *	 struct 'virtual to physical' routine (set by the user) to set the ring
- *	 with physical addresses.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	tx_queue	 Number of Tx queue.
- *	int			tx_desc_num	  Number of Tx descriptors
- *	int			tx_buff_size	  Size of Tx buffer
- *	unsigned int	tx_desc_base_addr  Tx descriptors memory area base addr.
- *	unsigned int	tx_buff_base_addr  Tx buffer memory area base addr.
- *
- * OUTPUT:
- *	The routine updates the Ethernet port control struct with information
- *	regarding the Tx descriptors and buffers.
- *
- * RETURN:
- *	false if the given descriptors memory area is not aligned according to
- *	Ethernet SDMA specifications.
- *	true otherwise.
- *
- *******************************************************************************/
-static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
-				     ETH_QUEUE tx_queue,
-				     int tx_desc_num,
-				     int tx_buff_size,
-				     unsigned int tx_desc_base_addr,
-				     unsigned int tx_buff_base_addr)
-{
-
-	ETH_TX_DESC *p_tx_desc;
-	ETH_TX_DESC *p_tx_prev_desc;
-	unsigned int buffer_addr;
-	int ix;			/* a counter */
-
-	/* save the first desc pointer to link with the last descriptor */
-	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
-	p_tx_prev_desc = p_tx_desc;
-	buffer_addr = tx_buff_base_addr;
-
-	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
-	if (tx_buff_base_addr & 0xF)
-		return false;
-
-	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
-	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
-	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
-		return false;
-
-	/* Initialize the Tx descriptors ring */
-	for (ix = 0; ix < tx_desc_num; ix++) {
-		p_tx_desc->byte_cnt = 0x0000;
-		p_tx_desc->l4i_chk = 0x0000;
-		p_tx_desc->cmd_sts = 0x00000000;
-		p_tx_desc->next_desc_ptr =
-			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
-
-		p_tx_desc->buf_ptr = buffer_addr;
-		p_tx_desc->return_info = 0x00000000;
-		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
-		buffer_addr += tx_buff_size;
-		p_tx_prev_desc = p_tx_desc;
-		p_tx_desc = (ETH_TX_DESC *)
-			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
-
-	}
-	/* Closing Tx descriptors ring */
-	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
-	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
-	/* Set Tx desc pointer in driver struct. */
-	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
-
-	/* Init Tx ring base and size parameters */
-	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
-		(ETH_TX_DESC *) tx_desc_base_addr;
-	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
-		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
-
-	/* Add the queue to the list of Tx queues of this port */
-	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
-
-	return true;
-}
-
-/*******************************************************************************
- * eth_port_send - Send an Ethernet packet
- *
- * DESCRIPTION:
- *	This routine send a given packet described by p_pktinfo parameter. It
- *	supports transmitting of a packet spaned over multiple buffers. The
- *	routine updates 'curr' and 'first' indexes according to the packet
- *	segment passed to the routine. In case the packet segment is first,
- *	the 'first' index is update. In any case, the 'curr' index is updated.
- *	If the routine get into Tx resource error it assigns 'curr' index as
- *	'first'. This way the function can abort Tx process of multiple
- *	descriptors per packet.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	tx_queue	 Number of Tx queue.
- *	PKT_INFO	*p_pkt_info	  User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'curr' and 'first' indexes are updated.
- *
- * RETURN:
- *	ETH_QUEUE_FULL in case of Tx resource error.
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
- *	ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
-					  ETH_QUEUE tx_queue,
-					  PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_first;
-	volatile ETH_TX_DESC *p_tx_desc_curr;
-	volatile ETH_TX_DESC *p_tx_next_desc_curr;
-	volatile ETH_TX_DESC *p_tx_desc_used;
-	unsigned int command_status;
-
-	/* Do not process Tx ring in case of Tx ring resource error */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		return ETH_QUEUE_FULL;
-
-	/* Get the Tx Desc ring indexes */
-	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-
-	if (p_tx_desc_curr == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
-	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
-
-	if (command_status & (ETH_TX_FIRST_DESC)) {
-		/* Update first desc */
-		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
-		p_tx_desc_first = p_tx_desc_curr;
-	} else {
-		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-		command_status |= ETH_BUFFER_OWNED_BY_DMA;
-	}
-
-	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
-	/* boundary. We use the memory allocated for Tx descriptor. This memory	 */
-	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
-	if (p_pkt_info->byte_cnt <= 8) {
-		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
-		return ETH_ERROR;
-
-		p_tx_desc_curr->buf_ptr =
-			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
-		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
-			    p_pkt_info->byte_cnt);
-	} else
-		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
-
-	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
-	p_tx_desc_curr->return_info = p_pkt_info->return_info;
-
-	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
-		/* Set last desc with DMA ownership and interrupt enable. */
-		p_tx_desc_curr->cmd_sts = command_status |
-			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
-
-		if (p_tx_desc_curr != p_tx_desc_first)
-			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
-
-		/* Flush CPU pipe */
-
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
-		CPU_PIPE_FLUSH;
-
-		/* Apply send command */
-		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
-
-		/* Finish Tx packet. Update first desc in case of Tx resource error */
-		p_tx_desc_first = p_tx_next_desc_curr;
-		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
-
-	} else {
-		p_tx_desc_curr->cmd_sts = command_status;
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
-	}
-
-	/* Check for ring index overlap in the Tx desc ring */
-	if (p_tx_next_desc_curr == p_tx_desc_used) {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_desc_first, tx_queue);
-
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
-		return ETH_QUEUE_LAST_RESOURCE;
-	} else {
-		/* Update the current descriptor */
-		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
-		return ETH_OK;
-	}
-}
-
-/*******************************************************************************
- * eth_tx_return_desc - Free all used Tx descriptors
- *
- * DESCRIPTION:
- *	This routine returns the transmitted packet information to the caller.
- *	It uses the 'first' index to support Tx desc return in case a transmit
- *	of a packet spanned over multiple buffer still in process.
- *	In case the Tx queue was in "resource error" condition, where there are
- *	no available Tx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	tx_queue	 Number of Tx queue.
- *	PKT_INFO	*p_pkt_info	  User packet buffer.
- *
- * OUTPUT:
- *	Tx ring 'first' and 'used' indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Tx desc ring.
- *	ETH_RETRY in case there is transmission in process.
- *	ETH_END_OF_JOB if the routine has nothing to release.
- *	ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE tx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
-	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
-	unsigned int command_status;
-
-	/* Get the Tx Desc ring indexes */
-	USED_TFD_GET (p_tx_desc_used, tx_queue);
-	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
-
-	/* Sanity check */
-	if (p_tx_desc_used == NULL)
-		return ETH_ERROR;
-
-	command_status = p_tx_desc_used->cmd_sts;
-
-	/* Still transmitting... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_RETRY;
-	}
-
-	/* Stop release. About to overlap the current available Tx descriptor */
-	if ((p_tx_desc_used == p_tx_desc_first) &&
-	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
-		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-		return ETH_END_OF_JOB;
-	}
-
-	/* Pass the packet information to the caller */
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->return_info = p_tx_desc_used->return_info;
-	p_tx_desc_used->return_info = 0;
-
-	/* Update the next descriptor to release. */
-	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
-
-	/* Any Tx return cancels the Tx resource error status */
-	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
-		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
-
-	return ETH_OK;
-
-}
-
-/*******************************************************************************
- * eth_port_receive - Get received information from Rx ring.
- *
- * DESCRIPTION:
- *	This routine returns the received data to the caller. There is no
- *	data copying during routine operation. All information is returned
- *	using pointer to packet information struct passed from the caller.
- *	If the routine exhausts Rx ring resources then the resource error flag
- *	is set.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	rx_queue	 Number of Rx queue.
- *	PKT_INFO	*p_pkt_info	  User packet buffer.
- *
- * OUTPUT:
- *	Rx ring current and used indexes are updated.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
- *	ETH_END_OF_JOB if there is no received data.
- *	ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_rx_curr_desc;
-	volatile ETH_RX_DESC *p_rx_next_curr_desc;
-	volatile ETH_RX_DESC *p_rx_used_desc;
-	unsigned int command_status;
-
-	/* Do not process Rx ring in case of Rx ring resource error */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
-		printf ("\nRx Queue is full ...\n");
-		return ETH_QUEUE_FULL;
-	}
-
-	/* Get the Rx Desc ring 'curr and 'used' indexes */
-	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
-	USED_RFD_GET (p_rx_used_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_rx_curr_desc == NULL)
-		return ETH_ERROR;
-
-	/* The following parameters are used to save readings from memory */
-	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
-	command_status = p_rx_curr_desc->cmd_sts;
-
-	/* Nothing to receive... */
-	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/*	DP(printf("Rx: command_status: %08x\n", command_status)); */
-		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
-		return ETH_END_OF_JOB;
-	}
-
-	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
-	p_pkt_info->cmd_sts = command_status;
-	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
-	p_pkt_info->return_info = p_rx_curr_desc->return_info;
-	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
-
-	/* Clean the return info field to indicate that the packet has been */
-	/* moved to the upper layers					    */
-	p_rx_curr_desc->return_info = 0;
-
-	/* Update 'curr' in data structure */
-	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
-
-	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
-	if (p_rx_next_curr_desc == p_rx_used_desc)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
-
-	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
-	CPU_PIPE_FLUSH;
-
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
- *
- * DESCRIPTION:
- *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
- *	next 'used' descriptor and attached the returned buffer to it.
- *	In case the Rx ring was in "resource error" condition, where there are
- *	no available Rx resources, the function resets the resource error flag.
- *
- * INPUT:
- *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE	rx_queue	 Number of Rx queue.
- *	PKT_INFO	*p_pkt_info	  Information on the returned buffer.
- *
- * OUTPUT:
- *	New available Rx resource in Rx descriptor ring.
- *
- * RETURN:
- *	ETH_ERROR in case the routine can not access Rx desc ring.
- *	ETH_OK otherwise.
- *
- *******************************************************************************/
-static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
-					       p_eth_port_ctrl,
-					       ETH_QUEUE rx_queue,
-					       PKT_INFO * p_pkt_info)
-{
-	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
-
-	/* Get 'used' Rx descriptor */
-	USED_RFD_GET (p_used_rx_desc, rx_queue);
-
-	/* Sanity check */
-	if (p_used_rx_desc == NULL)
-		return ETH_ERROR;
-
-	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
-	p_used_rx_desc->return_info = p_pkt_info->return_info;
-	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
-	p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE;	/* Reset Buffer size */
-
-	/* Flush the write pipe */
-	CPU_PIPE_FLUSH;
-
-	/* Return the descriptor to DMA ownership */
-	p_used_rx_desc->cmd_sts =
-		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
-
-	/* Flush descriptor and CPU pipe */
-	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
-	CPU_PIPE_FLUSH;
-
-	/* Move the used descriptor pointer to the next descriptor */
-	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
-
-	/* Any Rx return cancels the Rx resource error status */
-	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
-		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
-
-	return ETH_OK;
-}
-
-/*******************************************************************************
- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
- *
- * DESCRIPTION:
- *	This routine sets the RX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the tClk of the MV-643xx chip
- *	, and the required delay of the interrupt in usec.
- *
- * INPUT:
- *	ETH_PORT eth_port_num	   Ethernet port number
- *	unsigned int t_clk	  t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay	 Delay in usec
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-/*******************************************************************************
- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
- *
- * DESCRIPTION:
- *	This routine sets the TX coalescing interrupt mechanism parameter.
- *	This parameter is a timeout counter, that counts in 64 t_clk
- *	chunks ; that when timeout event occurs a maskable interrupt
- *	occurs.
- *	The parameter is calculated using the t_cLK frequency of the
- *	MV-643xx chip and the required delay in the interrupt in uSec
- *
- * INPUT:
- *	ETH_PORT eth_port_num	   Ethernet port number
- *	unsigned int t_clk	  t_clk of the MV-643xx chip in HZ units
- *	unsigned int delay	 Delay in uSeconds
- *
- * OUTPUT:
- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- *	The interrupt coalescing value set in the gigE port.
- *
- *******************************************************************************/
-
-/*******************************************************************************
- * eth_b_copy - Copy bytes from source to destination
- *
- * DESCRIPTION:
- *	 This function supports the eight bytes limitation on Tx buffer size.
- *	 The routine will zero eight bytes starting from the destination address
- *	 followed by copying bytes from the source address to the destination.
- *
- * INPUT:
- *	 unsigned int src_addr	  32 bit source address.
- *	 unsigned int dst_addr	  32 bit destination address.
- *	 int	    byte_count	  Number of bytes to copy.
- *
- * OUTPUT:
- *	 See description.
- *
- * RETURN:
- *	 None.
- *
- *******************************************************************************/
-static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
-			int byte_count)
-{
-	/* Zero the dst_addr area */
-	*(unsigned int *) dst_addr = 0x0;
-
-	while (byte_count != 0) {
-		*(char *) dst_addr = *(char *) src_addr;
-		dst_addr++;
-		src_addr++;
-		byte_count--;
-	}
-}
diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h
deleted file mode 100644
index 39dad52635..0000000000
--- a/board/prodrive/p3mx/mv_eth.h
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mv_eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __DB64460_ETH_H__
-#define __DB64460_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-#include <net.h>
-#include "mv_regs.h"
-#include "ppc_error_no.h"
-#include "../../Marvell/include/core.h"
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The first part is the high level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
-#ifndef MAX_SKB_FRAGS
-#define MAX_SKB_FRAGS 0
-#endif
-
-/* Port attributes */
-/*#define MAX_RX_QUEUE_NUM	8*/
-/*#define MAX_TX_QUEUE_NUM	8*/
-#define MAX_RX_QUEUE_NUM	1
-#define MAX_TX_QUEUE_NUM	1
-
-
-/* Use one TX queue and one RX queue */
-#define MV64460_TX_QUEUE_NUM 1
-#define MV64460_RX_QUEUE_NUM 1
-
-/*
- * Number of RX / TX descriptors on RX / TX rings.
- * Note that allocating RX descriptors is done by allocating the RX
- * ring AND a preallocated RX buffers (skb's) for each descriptor.
- * The TX descriptors only allocates the TX descriptors ring,
- * with no pre allocated TX buffers (skb's are allocated by higher layers.
- */
-
-/* Default TX ring size is 10 descriptors */
-#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE
-#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE
-#else
-#define MV64460_TX_QUEUE_SIZE 4
-#endif
-
-/* Default RX ring size is 4 descriptors */
-#ifdef	CONFIG_MV64460_ETH_RXQUEUE_SIZE
-#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE
-#else
-#define MV64460_RX_QUEUE_SIZE 4
-#endif
-
-#ifdef CONFIG_RX_BUFFER_SIZE
-#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
-#else
-#define MV64460_RX_BUFFER_SIZE 1600
-#endif
-
-#ifdef CONFIG_TX_BUFFER_SIZE
-#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
-#else
-#define MV64460_TX_BUFFER_SIZE 1600
-#endif
-
-/*
- *	Network device statistics. Akin to the 2.0 ether stats but
- *	with byte counters.
- */
-
-struct net_device_stats
-{
-	unsigned long	rx_packets;		/* total packets received	*/
-	unsigned long	tx_packets;		/* total packets transmitted	*/
-	unsigned long	rx_bytes;		/* total bytes received		*/
-	unsigned long	tx_bytes;		/* total bytes transmitted	*/
-	unsigned long	rx_errors;		/* bad packets received		*/
-	unsigned long	tx_errors;		/* packet transmit problems	*/
-	unsigned long	rx_dropped;		/* no space in linux buffers	*/
-	unsigned long	tx_dropped;		/* no space available in linux	*/
-	unsigned long	multicast;		/* multicast packets received	*/
-	unsigned long	collisions;
-
-	/* detailed rx_errors: */
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
-	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
-	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
-	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-
-	/* for cslip etc */
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
-};
-
-
-/* Private data structure used for ethernet device */
-struct mv64460_eth_priv {
-    unsigned int port_num;
-    struct net_device_stats *stats;
-
-    /* to buffer area aligned */
-    char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
-    char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
-
-    /* Size of Tx Ring per queue */
-    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
-
-    /* Size of Rx Ring per queue */
-    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
-
-    /* Magic Number for Ethernet running */
-    unsigned int eth_running;
-
-    int first_init;
-};
-
-int mv64460_eth_init (struct eth_device *dev);
-int mv64460_eth_stop (struct eth_device *dev);
-int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
-/*	return db64460_eth0_poll(); */
-
-int mv64460_eth_open (struct eth_device *dev);
-
-
-/*************************************************************************
-**************************************************************************
-**************************************************************************
-*  The second part is the low level driver of the gigE ethernet ports.	 *
-**************************************************************************
-**************************************************************************
-*************************************************************************/
-
-
-/********************************************************************************
- * Header File for : MV-643xx network interface header
- *
- * DESCRIPTION:
- *	 This header file contains macros typedefs and function declaration for
- *	 the Marvell Gig Bit Ethernet Controller.
- *
- * DEPENDENCIES:
- *	 None.
- *
- *******************************************************************************/
-
-
-#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
-#ifdef CONFIG_MV64460_SRAM_CACHEABLE
-/* In case SRAM is cacheable but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case SRAM is cache coherent or non-cacheable */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif
-#else
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/* In case of descriptors on DDR but not cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset)       \
-{		    \
-  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-}
-#else
-/* In case of descriptors on DDR and cache coherent */
-#define D_CACHE_FLUSH_LINE(addr, offset) ;
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
-
-
-#define CPU_PIPE_FLUSH		   \
-{		  \
-  __asm__ __volatile__ ("eieio");	  \
-}
-
-
-/* defines  */
-
-/* Default port configuration value */
-#define PORT_CONFIG_VALUE			\
-	     ETH_UNICAST_NORMAL_MODE		|   \
-	     ETH_DEFAULT_RX_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
-	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
-	     ETH_RECEIVE_BC_IF_IP		|   \
-	     ETH_RECEIVE_BC_IF_ARP		|   \
-	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
-	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
-	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
-	     ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-/* Default port extend configuration value */
-#define PORT_CONFIG_EXTEND_VALUE		\
-	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
-	     ETH_PARTITION_DISABLE
-
-
-/* Default sdma control value */
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PORT_SDMA_CONFIG_VALUE				\
-			 ETH_RX_BURST_SIZE_16_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_16_64BIT;
-#else
-#define PORT_SDMA_CONFIG_VALUE			\
-			 ETH_RX_BURST_SIZE_4_64BIT	|	\
-			 GT_ETH_IPG_INT_RX(0)			|	\
-			 ETH_TX_BURST_SIZE_4_64BIT;
-#endif
-
-#define GT_ETH_IPG_INT_RX(value)		\
-	    ((value & 0x3fff) << 8)
-
-/* Default port serial control value */
-#define PORT_SERIAL_CONTROL_VALUE			    \
-			ETH_FORCE_LINK_PASS			|	\
-			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-			ETH_FORCE_BP_MODE_NO_JAM		|	\
-			BIT9					|	\
-			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-			ETH_RETRANSMIT_16_ETTEMPTS		|	\
-			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-			ETH_DTE_ADV_0				|	\
-			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-			ETH_AUTO_NEG_NO_CHANGE			|	\
-			ETH_MAX_RX_PACKET_1552BYTE		|	\
-			ETH_CLR_EXT_LOOPBACK			|	\
-			ETH_SET_FULL_DUPLEX_MODE		|	\
-			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
-
-#define RX_BUFFER_MAX_SIZE  0xFFFF
-#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
-
-#define RX_BUFFER_MIN_SIZE  0x8
-#define TX_BUFFER_MIN_SIZE  0x8
-
-/* Tx WRR confoguration macros */
-#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
-#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
-#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
-
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR	    0
-#define REJECT_MAC_ADDR	    1
-
-/* Size of a Tx/Rx descriptor used in chain list data structure */
-#define RX_DESC_ALIGNED_SIZE		0x20
-#define TX_DESC_ALIGNED_SIZE		0x20
-
-/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
-#define TX_BUF_OFFSET_IN_DESC	    0x18
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET				0x2
-
-/* Gap define */
-#define ETH_BAR_GAP					0x8
-#define ETH_SIZE_REG_GAP				0x8
-#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
-#define ETH_PORT_ACCESS_CTRL_GAP			0x4
-
-/* Gigabit Ethernet Unit Global Registers */
-
-/* MIB Counters register definitions */
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
-#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
-#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
-#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
-#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
-#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
-#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
-#define ETH_MIB_FRAMES_64_OCTETS	   0x20
-#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
-#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
-#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
-#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
-#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
-#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
-#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
-#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
-#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
-#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
-#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
-#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
-#define ETH_MIB_FC_SENT			   0x54
-#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
-#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
-#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
-#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
-#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
-#define ETH_MIB_JABBER_RECEIVED		   0x6c
-#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
-#define ETH_MIB_BAD_CRC_EVENT		   0x74
-#define ETH_MIB_COLLISION		   0x78
-#define ETH_MIB_LATE_COLLISION		   0x7c
-
-/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_GMII_MII				0
-#define ETH_INTERFACE_PCM				BIT0
-#define ETH_LINK_IS_DOWN				0
-#define ETH_LINK_IS_UP					BIT1
-#define ETH_PORT_AT_HALF_DUPLEX				0
-#define ETH_PORT_AT_FULL_DUPLEX				BIT2
-#define ETH_RX_FLOW_CTRL_DISABLED			0
-#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
-#define ETH_GMII_SPEED_100_10				0
-#define ETH_GMII_SPEED_1000				BIT4
-#define ETH_MII_SPEED_10				0
-#define ETH_MII_SPEED_100				BIT5
-#define ETH_NO_TX					0
-#define ETH_TX_IN_PROGRESS				BIT7
-#define ETH_BYPASS_NO_ACTIVE				0
-#define ETH_BYPASS_ACTIVE				BIT8
-#define ETH_PORT_NOT_AT_PARTITION_STATE			0
-#define ETH_PORT_AT_PARTITION_STATE			BIT9
-#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
-#define ETH_PORT_TX_FIFO_EMPTY				BIT10
-
-
-/* These macros describes the Port configuration reg (Px_cR) bits */
-#define ETH_UNICAST_NORMAL_MODE				0
-#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
-#define ETH_DEFAULT_RX_QUEUE_0				0
-#define ETH_DEFAULT_RX_QUEUE_1				BIT1
-#define ETH_DEFAULT_RX_QUEUE_2				BIT2
-#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_4				BIT3
-#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
-#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
-#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
-#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
-#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
-#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
-#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
-#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
-#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
-#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
-#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
-#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
-#define ETH_RECEIVE_BC_IF_IP				0
-#define ETH_REJECT_BC_IF_IP				BIT8
-#define ETH_RECEIVE_BC_IF_ARP				0
-#define ETH_REJECT_BC_IF_ARP				BIT9
-#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
-#define ETH_CAPTURE_TCP_FRAMES_DIS			0
-#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
-#define ETH_CAPTURE_UDP_FRAMES_DIS			0
-#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
-#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
-#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
-#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
-#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
-#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
-#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
-#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
-#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
-#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
-#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
-#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
-#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
-#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
-#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
-#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
-#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
-#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
-#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
-#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
-
-
-/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define ETH_CLASSIFY_EN					BIT0
-#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
-#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
-#define ETH_PARTITION_DISABLE				0
-#define ETH_PARTITION_ENABLE				BIT2
-
-
-/* Tx/Rx queue command reg (RQCR/TQCR)*/
-#define ETH_QUEUE_0_ENABLE				BIT0
-#define ETH_QUEUE_1_ENABLE				BIT1
-#define ETH_QUEUE_2_ENABLE				BIT2
-#define ETH_QUEUE_3_ENABLE				BIT3
-#define ETH_QUEUE_4_ENABLE				BIT4
-#define ETH_QUEUE_5_ENABLE				BIT5
-#define ETH_QUEUE_6_ENABLE				BIT6
-#define ETH_QUEUE_7_ENABLE				BIT7
-#define ETH_QUEUE_0_DISABLE				BIT8
-#define ETH_QUEUE_1_DISABLE				BIT9
-#define ETH_QUEUE_2_DISABLE				BIT10
-#define ETH_QUEUE_3_DISABLE				BIT11
-#define ETH_QUEUE_4_DISABLE				BIT12
-#define ETH_QUEUE_5_DISABLE				BIT13
-#define ETH_QUEUE_6_DISABLE				BIT14
-#define ETH_QUEUE_7_DISABLE				BIT15
-
-/* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define ETH_RIFB					BIT0
-#define ETH_RX_BURST_SIZE_1_64BIT			0
-#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
-#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
-#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
-#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
-#define ETH_BLM_RX_NO_SWAP				BIT4
-#define ETH_BLM_RX_BYTE_SWAP				0
-#define ETH_BLM_TX_NO_SWAP				BIT5
-#define ETH_BLM_TX_BYTE_SWAP				0
-#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
-#define ETH_DESCRIPTORS_NO_SWAP				0
-#define ETH_TX_BURST_SIZE_1_64BIT			0
-#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
-#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
-#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
-#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
-
-/* These macros describes the Port serial control reg (PSCR) bits */
-#define ETH_SERIAL_PORT_DISABLE				0
-#define ETH_SERIAL_PORT_ENABLE				BIT0
-#define ETH_FORCE_LINK_PASS				BIT1
-#define ETH_DO_NOT_FORCE_LINK_PASS			0
-#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
-#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
-#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
-#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
-#define ETH_ADV_NO_FLOW_CTRL				0
-#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
-#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
-#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
-#define ETH_FORCE_BP_MODE_NO_JAM			0
-#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
-#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
-#define ETH_FORCE_LINK_FAIL				0
-#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
-#define ETH_RETRANSMIT_16_ETTEMPTS			0
-#define ETH_RETRANSMIT_FOREVER				BIT11
-#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
-#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
-#define ETH_DTE_ADV_0					0
-#define ETH_DTE_ADV_1					BIT14
-#define ETH_DISABLE_AUTO_NEG_BYPASS			0
-#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
-#define ETH_AUTO_NEG_NO_CHANGE				0
-#define ETH_RESTART_AUTO_NEG				BIT16
-#define ETH_MAX_RX_PACKET_1518BYTE			0
-#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
-#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
-#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
-#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
-#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
-#define ETH_SET_EXT_LOOPBACK				BIT20
-#define ETH_CLR_EXT_LOOPBACK				0
-#define ETH_SET_FULL_DUPLEX_MODE			BIT21
-#define ETH_SET_HALF_DUPLEX_MODE			0
-#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
-#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
-#define ETH_SET_GMII_SPEED_TO_10_100			0
-#define ETH_SET_GMII_SPEED_TO_1000			BIT23
-#define ETH_SET_MII_SPEED_TO_10				0
-#define ETH_SET_MII_SPEED_TO_100			BIT24
-
-
-/* SMI reg */
-#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
-#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
-#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
-
-/* SDMA command status fields macros */
-
-/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY		    (BIT0)
-
-/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
-
-/* Tx descriptors status */
-#define ETH_LC_ERROR			    (0	  )
-#define ETH_UR_ERROR			    (BIT1 )
-#define ETH_RL_ERROR			    (BIT2 )
-#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
-
-/* Rx descriptors status */
-#define ETH_CRC_ERROR			    (0	  )
-#define ETH_OVERRUN_ERROR		    (BIT1 )
-#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
-#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
-#define ETH_VLAN_TAGGED			    (BIT19)
-#define ETH_BPDU_FRAME			    (BIT20)
-#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
-#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
-#define ETH_OTHER_FRAME_TYPE		    (BIT22)
-#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
-#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
-#define ETH_FRAME_HEADER_OK		    (BIT25)
-#define ETH_RX_LAST_DESC		    (BIT26)
-#define ETH_RX_FIRST_DESC		    (BIT27)
-#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
-#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
-#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
-
-/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED		    (BIT2)
-
-/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
-#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
-#define ETH_TCP_FRAME			    (0	  )
-#define ETH_UDP_FRAME			    (BIT16)
-#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
-#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
-#define ETH_ZERO_PADDING		    (BIT19)
-#define ETH_TX_LAST_DESC		    (BIT20)
-#define ETH_TX_FIRST_DESC		    (BIT21)
-#define ETH_GEN_CRC			    (BIT22)
-#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
-#define ETH_AUTO_MODE			    (BIT30)
-
-/* Address decode parameters */
-/* Ethernet Base Address Register bits */
-#define EBAR_TARGET_DRAM					0x00000000
-#define EBAR_TARGET_DEVICE					0x00000001
-#define EBAR_TARGET_CBS						0x00000002
-#define EBAR_TARGET_PCI0					0x00000003
-#define EBAR_TARGET_PCI1					0x00000004
-#define EBAR_TARGET_CUNIT					0x00000005
-#define EBAR_TARGET_AUNIT					0x00000006
-#define EBAR_TARGET_GUNIT					0x00000007
-
-/* Window attributes */
-#define EBAR_ATTR_DRAM_CS0					0x00000E00
-#define EBAR_ATTR_DRAM_CS1					0x00000D00
-#define EBAR_ATTR_DRAM_CS2					0x00000B00
-#define EBAR_ATTR_DRAM_CS3					0x00000700
-
-/* DRAM Target interface */
-#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
-#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
-
-/* Device Bus Target interface */
-#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
-#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
-#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
-#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
-#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
-
-/* PCI Target interface */
-#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
-#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
-#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
-#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
-#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
-#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
-#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
-#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
-#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
-#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
-
-/* CPU 60x bus or internal SRAM interface */
-#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
-#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
-#define EBAR_ATTR_CBS_SRAM					0x00000000
-#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
-
-/* Window access control */
-#define EWIN_ACCESS_NOT_ALLOWED 0
-#define EWIN_ACCESS_READ_ONLY	BIT0
-#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
-#define EWIN0_ACCESS_MASK		0x0003
-#define EWIN1_ACCESS_MASK		0x000C
-#define EWIN2_ACCESS_MASK		0x0030
-#define EWIN3_ACCESS_MASK		0x00C0
-
-/* typedefs */
-
-typedef enum _eth_port
-{
-    ETH_0 = 0,
-	ETH_1 = 1,
-	ETH_2 = 2
-}ETH_PORT;
-
-typedef enum _eth_func_ret_status
-{
-    ETH_OK,			/* Returned as expected.		    */
-    ETH_ERROR,			/* Fundamental error.			    */
-    ETH_RETRY,			/* Could not process request. Try later.    */
-    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
-    ETH_QUEUE_FULL,		/* Ring resource error.			    */
-    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
-}ETH_FUNC_RET_STATUS;
-
-typedef enum _eth_queue
-{
-	ETH_Q0 = 0,
-	ETH_Q1 = 1,
-	ETH_Q2 = 2,
-	ETH_Q3 = 3,
-	ETH_Q4 = 4,
-	ETH_Q5 = 5,
-	ETH_Q6 = 6,
-    ETH_Q7 = 7
-} ETH_QUEUE;
-
-typedef enum _addr_win
-{
-	ETH_WIN0,
-	ETH_WIN1,
-	ETH_WIN2,
-	ETH_WIN3,
-	ETH_WIN4,
-    ETH_WIN5
-} ETH_ADDR_WIN;
-
-typedef enum _eth_target
-{
-	ETH_TARGET_DRAM	 ,
-	ETH_TARGET_DEVICE,
-	ETH_TARGET_CBS	 ,
-	ETH_TARGET_PCI0	 ,
-	ETH_TARGET_PCI1
-}ETH_TARGET;
-
-typedef struct _eth_rx_desc
-{
-	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
-	unsigned short	buf_size	   ;	/* Buffer size			    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_RX_DESC;
-
-
-typedef struct _eth_tx_desc
-{
-    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
-    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
-    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
-    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
-    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} ETH_TX_DESC;
-
-/* Unified struct for Rx and Tx operations. The user is not required to */
-/* be familier with neither Tx nor Rx descriptors.			 */
-typedef struct _pkt_info
-{
-	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
-	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
-	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
-	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
-    unsigned int    return_info ;    /* User resource return information */
-} PKT_INFO;
-
-
-typedef struct _eth_win_param
-{
-    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
-    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
-    unsigned short attributes;	/* BAR attributes. See above macros. */
-    unsigned int base_addr; /* Window base address in unsigned int form */
-    unsigned int high_addr; /* Window high address in unsigned int form */
-    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
-    bool enable; /* Enable/disable access to the window. */
-    unsigned short access_ctrl; /* Access ctrl register. see above macros */
-} ETH_WIN_PARAM;
-
-
-/* Ethernet port specific infomation */
-
-typedef struct _eth_port_ctrl
-{
-    ETH_PORT  port_num; /* User Ethernet port number */
-    int port_phy_addr;	/* User phy address of Ethrnet port */
-    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
-    unsigned int  port_config; /* User port configuration value */
-    unsigned int  port_config_extend; /* User port config extend value */
-    unsigned int  port_sdma_config; /* User port SDMA config value */
-    unsigned int  port_serial_control; /* User port serial control value */
-    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
-    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
-
-    /* User function to cast virtual address to CPU bus address */
-    unsigned int  (*port_virt_to_phys)(unsigned int addr);
-    /* User scratch pad for user specific data structures */
-    void *port_private;
-
-    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
-    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
-
-    /* Tx/Rx rings managment indexes fields. For driver use */
-
-    /* Next available Rx resource */
-    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
-    /* Returning Rx resource */
-    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
-
-    /* Next available Tx resource */
-    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
-    /* Returning Tx resource */
-    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
-    /* An extra Tx index to support transmit of multiple buffers per packet */
-    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
-
-    /* Tx/Rx rings size and base variables fields. For driver use */
-
-    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
-    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
-    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
-
-    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
-    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
-    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
-
-} ETH_PORT_INFO;
-
-
-/* ethernet.h API list */
-
-/* Port operation control routines */
-static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
-static void eth_port_reset(ETH_PORT	eth_port_num);
-static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
-
-
-/* Port MAC address routines */
-static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
-				  unsigned char *p_addr,
-				  ETH_QUEUE queue);
-
-/* PHY and MIB routines */
-static bool ethernet_phy_reset(ETH_PORT eth_port_num);
-
-static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
-				   unsigned int phy_reg,
-				   unsigned int value);
-
-static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
-				  unsigned int phy_reg,
-				  unsigned int* value);
-
-static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
-
-/* Port data flow control routines */
-static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE tx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE tx_queue,
-					      PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
-					     ETH_QUEUE rx_queue,
-					     PKT_INFO *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
-					      ETH_QUEUE rx_queue,
-					      PKT_INFO *p_pkt_info);
-
-
-static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	tx_queue,
-				    int				tx_desc_num,
-				    int				tx_buff_size,
-				    unsigned int	tx_desc_base_addr,
-				    unsigned int	tx_buff_base_addr);
-
-static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
-				    ETH_QUEUE	rx_queue,
-				    int				rx_desc_num,
-				    int				rx_buff_size,
-				    unsigned int	rx_desc_base_addr,
-				    unsigned int	rx_buff_base_addr);
-
-#endif /* MV64460_ETH_ */
diff --git a/board/prodrive/p3mx/mv_regs.h b/board/prodrive/p3mx/mv_regs.h
deleted file mode 100644
index 068590f9d3..0000000000
--- a/board/prodrive/p3mx/mv_regs.h
+++ /dev/null
@@ -1,1125 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64460X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/********************************************************************************
-* gt64460r.h - GT-64460 Internal registers definition file.
-*
-* DESCRIPTION:
-*	None.
-*
-* DEPENDENCIES:
-*	None.
-*
-*******************************************************************************/
-
-#ifndef __INCmv_regsh
-#define __INCmv_regsh
-
-#define MV64460
-
-/* Supported by the Atlantis */
-#define MV64460_INCLUDE_PCI_1
-#define MV64460_INCLUDE_PCI_0_ARBITER
-#define MV64460_INCLUDE_PCI_1_ARBITER
-#define MV64460_INCLUDE_SNOOP_SUPPORT
-#define MV64460_INCLUDE_P2P
-#define MV64460_INCLUDE_ETH_PORT_2
-#define MV64460_INCLUDE_CPU_MAPPING
-#define MV64460_INCLUDE_MPSC
-
-/* Not supported features */
-#undef	INCLUDE_CNTMR_4_7
-#undef	INCLUDE_DMA_4_7
-
-/****************************************/
-/* Processor Address Space		*/
-/****************************************/
-
-/* DDR SDRAM BAR and size registers */
-
-#define MV64460_CS_0_BASE_ADDR					    0x008
-#define MV64460_CS_0_SIZE					    0x010
-#define MV64460_CS_1_BASE_ADDR					    0x208
-#define MV64460_CS_1_SIZE					    0x210
-#define MV64460_CS_2_BASE_ADDR					    0x018
-#define MV64460_CS_2_SIZE					    0x020
-#define MV64460_CS_3_BASE_ADDR					    0x218
-#define MV64460_CS_3_SIZE					    0x220
-
-/* Devices BAR and size registers */
-
-#define MV64460_DEV_CS0_BASE_ADDR				    0x028
-#define MV64460_DEV_CS0_SIZE					    0x030
-#define MV64460_DEV_CS1_BASE_ADDR				    0x228
-#define MV64460_DEV_CS1_SIZE					    0x230
-#define MV64460_DEV_CS2_BASE_ADDR				    0x248
-#define MV64460_DEV_CS2_SIZE					    0x250
-#define MV64460_DEV_CS3_BASE_ADDR				    0x038
-#define MV64460_DEV_CS3_SIZE					    0x040
-#define MV64460_BOOTCS_BASE_ADDR				    0x238
-#define MV64460_BOOTCS_SIZE					    0x240
-
-/* PCI 0 BAR and size registers */
-
-#define MV64460_PCI_0_IO_BASE_ADDR				    0x048
-#define MV64460_PCI_0_IO_SIZE					    0x050
-#define MV64460_PCI_0_MEMORY0_BASE_ADDR				    0x058
-#define MV64460_PCI_0_MEMORY0_SIZE				    0x060
-#define MV64460_PCI_0_MEMORY1_BASE_ADDR				    0x080
-#define MV64460_PCI_0_MEMORY1_SIZE				    0x088
-#define MV64460_PCI_0_MEMORY2_BASE_ADDR				    0x258
-#define MV64460_PCI_0_MEMORY2_SIZE				    0x260
-#define MV64460_PCI_0_MEMORY3_BASE_ADDR				    0x280
-#define MV64460_PCI_0_MEMORY3_SIZE				    0x288
-
-/* PCI 1 BAR and size registers */
-#define MV64460_PCI_1_IO_BASE_ADDR				    0x090
-#define MV64460_PCI_1_IO_SIZE					    0x098
-#define MV64460_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
-#define MV64460_PCI_1_MEMORY0_SIZE				    0x0a8
-#define MV64460_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
-#define MV64460_PCI_1_MEMORY1_SIZE				    0x0b8
-#define MV64460_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
-#define MV64460_PCI_1_MEMORY2_SIZE				    0x2a8
-#define MV64460_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
-#define MV64460_PCI_1_MEMORY3_SIZE				    0x2b8
-
-/* SRAM base address */
-#define MV64460_INTEGRATED_SRAM_BASE_ADDR			    0x268
-
-/* internal registers space base address */
-#define MV64460_INTERNAL_SPACE_BASE_ADDR			    0x068
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1
-   windows above */
-#define MV64460_BASE_ADDR_ENABLE				    0x278
-
-/****************************************/
-/* PCI remap registers			*/
-/****************************************/
-      /* PCI 0 */
-#define MV64460_PCI_0_IO_ADDR_REMAP				    0x0f0
-#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
-#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
-#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
-#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
-#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
-#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
-#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
-#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
-      /* PCI 1 */
-#define MV64460_PCI_1_IO_ADDR_REMAP				    0x108
-#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
-#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
-#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
-#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
-#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
-#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
-#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
-#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
-
-#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
-#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
-#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
-#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
-#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
-#define MV64460_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
-#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
-#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
-
-/****************************************/
-/*	   CPU Control Registers	*/
-/****************************************/
-
-#define MV64460_CPU_CONFIG					    0x000
-#define MV64460_CPU_MODE					    0x120
-#define MV64460_CPU_MASTER_CONTROL				    0x160
-#define MV64460_CPU_CROSS_BAR_CONTROL_LOW			    0x150
-#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
-#define MV64460_CPU_CROSS_BAR_TIMEOUT				    0x168
-
-/****************************************/
-/* SMP RegisterS			*/
-/****************************************/
-
-#define MV64460_SMP_WHO_AM_I					    0x200
-#define MV64460_SMP_CPU0_DOORBELL				    0x214
-#define MV64460_SMP_CPU0_DOORBELL_CLEAR				    0x21C
-#define MV64460_SMP_CPU1_DOORBELL				    0x224
-#define MV64460_SMP_CPU1_DOORBELL_CLEAR				    0x22C
-#define MV64460_SMP_CPU0_DOORBELL_MASK				    0x234
-#define MV64460_SMP_CPU1_DOORBELL_MASK				    0x23C
-#define MV64460_SMP_SEMAPHOR0					    0x244
-#define MV64460_SMP_SEMAPHOR1					    0x24c
-#define MV64460_SMP_SEMAPHOR2					    0x254
-#define MV64460_SMP_SEMAPHOR3					    0x25c
-#define MV64460_SMP_SEMAPHOR4					    0x264
-#define MV64460_SMP_SEMAPHOR5					    0x26c
-#define MV64460_SMP_SEMAPHOR6					    0x274
-#define MV64460_SMP_SEMAPHOR7					    0x27c
-
-/****************************************/
-/*  CPU Sync Barrier Register		*/
-/****************************************/
-
-#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
-#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
-#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
-#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
-
-/****************************************/
-/* CPU Access Protect			*/
-/****************************************/
-
-#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
-#define MV64460_CPU_PROTECT_WINDOW_0_SIZE			    0x188
-#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
-#define MV64460_CPU_PROTECT_WINDOW_1_SIZE			    0x198
-#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
-#define MV64460_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
-#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
-#define MV64460_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
-
-
-/****************************************/
-/*	    CPU Error Report		*/
-/****************************************/
-
-#define MV64460_CPU_ERROR_ADDR_LOW				    0x070
-#define MV64460_CPU_ERROR_ADDR_HIGH				    0x078
-#define MV64460_CPU_ERROR_DATA_LOW				    0x128
-#define MV64460_CPU_ERROR_DATA_HIGH				    0x130
-#define MV64460_CPU_ERROR_PARITY				    0x138
-#define MV64460_CPU_ERROR_CAUSE					    0x140
-#define MV64460_CPU_ERROR_MASK					    0x148
-
-/****************************************/
-/*	CPU Interface Debug Registers	*/
-/****************************************/
-
-#define MV64460_PUNIT_SLAVE_DEBUG_LOW				    0x360
-#define MV64460_PUNIT_SLAVE_DEBUG_HIGH				    0x368
-#define MV64460_PUNIT_MASTER_DEBUG_LOW				    0x370
-#define MV64460_PUNIT_MASTER_DEBUG_HIGH				    0x378
-#define MV64460_PUNIT_MMASK					    0x3e4
-
-/****************************************/
-/*  Integrated SRAM Registers		*/
-/****************************************/
-
-#define MV64460_SRAM_CONFIG					    0x380
-#define MV64460_SRAM_TEST_MODE					    0X3F4
-#define MV64460_SRAM_ERROR_CAUSE				    0x388
-#define MV64460_SRAM_ERROR_ADDR					    0x390
-#define MV64460_SRAM_ERROR_ADDR_HIGH				    0X3F8
-#define MV64460_SRAM_ERROR_DATA_LOW				    0x398
-#define MV64460_SRAM_ERROR_DATA_HIGH				    0x3a0
-#define MV64460_SRAM_ERROR_DATA_PARITY				    0x3a8
-
-/****************************************/
-/* SDRAM Configuration			*/
-/****************************************/
-
-#define MV64460_SDRAM_CONFIG					    0x1400
-#define MV64460_D_UNIT_CONTROL_LOW				    0x1404
-#define MV64460_D_UNIT_CONTROL_HIGH				    0x1424
-#define MV64460_D_UNIT_MMASK					    0x14B0
-#define MV64460_SDRAM_TIMING_CONTROL_LOW			    0x1408
-#define MV64460_SDRAM_TIMING_CONTROL_HIGH			    0x140c
-#define MV64460_SDRAM_ADDR_CONTROL				    0x1410
-#define MV64460_SDRAM_OPEN_PAGES_CONTROL			    0x1414
-#define MV64460_SDRAM_OPERATION					    0x1418
-#define MV64460_SDRAM_MODE					    0x141c
-#define MV64460_EXTENDED_DRAM_MODE				    0x1420
-#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
-#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
-#define MV64460_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
-#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
-#define MV64460_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
-
-/****************************************/
-/* SDRAM Error Report			*/
-/****************************************/
-
-#define MV64460_SDRAM_ERROR_DATA_LOW				    0x1444
-#define MV64460_SDRAM_ERROR_DATA_HIGH				    0x1440
-#define MV64460_SDRAM_ERROR_ADDR				    0x1450
-#define MV64460_SDRAM_RECEIVED_ECC				    0x1448
-#define MV64460_SDRAM_CALCULATED_ECC				    0x144c
-#define MV64460_SDRAM_ECC_CONTROL				    0x1454
-#define MV64460_SDRAM_ECC_ERROR_COUNTER				    0x1458
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-
-#define MV64460_DFCDL_CONFIG0					    0x1480
-#define MV64460_DFCDL_CONFIG1					    0x1484
-#define MV64460_DLL_WRITE					    0x1488
-#define MV64460_DLL_READ					    0x148c
-#define MV64460_SRAM_ADDR					    0x1490
-#define MV64460_SRAM_DATA0					    0x1494
-#define MV64460_SRAM_DATA1					    0x1498
-#define MV64460_SRAM_DATA2					    0x149c
-#define MV64460_DFCL_PROBE					    0x14a0
-
-/******************************************/
-/*   Debug Registers			  */
-/******************************************/
-
-#define MV64460_DUNIT_DEBUG_LOW					    0x1460
-#define MV64460_DUNIT_DEBUG_HIGH				    0x1464
-#define MV64460_DUNIT_MMASK					    0X1b40
-
-/****************************************/
-/* Device Parameters			*/
-/****************************************/
-
-#define MV64460_DEVICE_BANK0_PARAMETERS				    0x45c
-#define MV64460_DEVICE_BANK1_PARAMETERS				    0x460
-#define MV64460_DEVICE_BANK2_PARAMETERS				    0x464
-#define MV64460_DEVICE_BANK3_PARAMETERS				    0x468
-#define MV64460_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
-#define MV64460_DEVICE_INTERFACE_CONTROL			    0x4c0
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
-#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
-
-/****************************************/
-/* Device interrupt registers		*/
-/****************************************/
-
-#define MV64460_DEVICE_INTERRUPT_CAUSE				    0x4d0
-#define MV64460_DEVICE_INTERRUPT_MASK				    0x4d4
-#define MV64460_DEVICE_ERROR_ADDR				    0x4d8
-#define MV64460_DEVICE_ERROR_DATA				    0x4dc
-#define MV64460_DEVICE_ERROR_PARITY				    0x4e0
-
-/****************************************/
-/* Device debug registers		*/
-/****************************************/
-
-#define MV64460_DEVICE_DEBUG_LOW				    0x4e4
-#define MV64460_DEVICE_DEBUG_HIGH				    0x4e8
-#define MV64460_RUNIT_MMASK					    0x4f0
-
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-
-#define MV64460_PCI_0_CS_0_BANK_SIZE				    0xc08
-#define MV64460_PCI_1_CS_0_BANK_SIZE				    0xc88
-#define MV64460_PCI_0_CS_1_BANK_SIZE				    0xd08
-#define MV64460_PCI_1_CS_1_BANK_SIZE				    0xd88
-#define MV64460_PCI_0_CS_2_BANK_SIZE				    0xc0c
-#define MV64460_PCI_1_CS_2_BANK_SIZE				    0xc8c
-#define MV64460_PCI_0_CS_3_BANK_SIZE				    0xd0c
-#define MV64460_PCI_1_CS_3_BANK_SIZE				    0xd8c
-#define MV64460_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
-#define MV64460_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
-#define MV64460_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
-#define MV64460_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
-#define MV64460_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
-#define MV64460_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
-#define MV64460_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
-#define MV64460_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
-#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
-#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
-#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
-#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
-#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
-#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
-#define MV64460_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
-#define MV64460_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
-#define MV64460_PCI_0_CPU_BAR_SIZE				    0xd28
-#define MV64460_PCI_1_CPU_BAR_SIZE				    0xda8
-#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
-#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
-#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
-#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
-#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
-#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
-#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
-#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
-#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
-#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
-#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
-#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
-#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
-#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
-#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
-#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
-#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
-#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
-#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
-#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
-#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
-#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
-#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
-#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
-#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
-#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
-#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
-#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
-#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
-#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
-#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
-#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
-#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
-#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
-#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
-#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
-#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
-#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
-#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
-#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
-#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
-#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
-#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
-#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
-#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
-#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
-#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
-#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
-#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
-#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
-#define MV64460_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
-#define MV64460_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
-#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
-#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
-#define MV64460_PCI_0_HEADERS_RETARGET_BASE			    0xF44
-#define MV64460_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
-#define MV64460_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
-#define MV64460_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
-
-/***********************************/
-/*   PCI Control Register Map	   */
-/***********************************/
-
-#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
-#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
-#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
-#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
-#define MV64460_PCI_0_COMMAND					    0xc00
-#define MV64460_PCI_1_COMMAND					    0xc80
-#define MV64460_PCI_0_MODE					    0xd00
-#define MV64460_PCI_1_MODE					    0xd80
-#define MV64460_PCI_0_RETRY					    0xc04
-#define MV64460_PCI_1_RETRY					    0xc84
-#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
-#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
-#define MV64460_PCI_0_MSI_TRIGGER_TIMER				    0xc38
-#define MV64460_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
-#define MV64460_PCI_0_ARBITER_CONTROL				    0x1d00
-#define MV64460_PCI_1_ARBITER_CONTROL				    0x1d80
-#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
-#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
-#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
-#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
-#define MV64460_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
-#define MV64460_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
-#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
-#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
-#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
-#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
-#define MV64460_PCI_0_P2P_CONFIG				    0x1d14
-#define MV64460_PCI_1_P2P_CONFIG				    0x1d94
-
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
-#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
-#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
-
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
-#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
-#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define MV64460_PCI_0_CONFIG_ADDR				    0xcf8
-#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
-#define MV64460_PCI_1_CONFIG_ADDR				    0xc78
-#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
-#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
-#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers		*/
-/****************************************/
-
-#define MV64460_PCI_0_SERR_MASK					    0xc28
-#define MV64460_PCI_1_SERR_MASK					    0xca8
-#define MV64460_PCI_0_ERROR_ADDR_LOW				    0x1d40
-#define MV64460_PCI_1_ERROR_ADDR_LOW				    0x1dc0
-#define MV64460_PCI_0_ERROR_ADDR_HIGH				    0x1d44
-#define MV64460_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
-#define MV64460_PCI_0_ERROR_ATTRIBUTE				    0x1d48
-#define MV64460_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
-#define MV64460_PCI_0_ERROR_COMMAND				    0x1d50
-#define MV64460_PCI_1_ERROR_COMMAND				    0x1dd0
-#define MV64460_PCI_0_ERROR_CAUSE				    0x1d58
-#define MV64460_PCI_1_ERROR_CAUSE				    0x1dd8
-#define MV64460_PCI_0_ERROR_MASK				    0x1d5c
-#define MV64460_PCI_1_ERROR_MASK				    0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers		*/
-/****************************************/
-
-#define MV64460_PCI_0_MMASK					    0X1D24
-#define MV64460_PCI_1_MMASK					    0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define MV64460_PCI_DEVICE_AND_VENDOR_ID			    0x000
-#define MV64460_PCI_STATUS_AND_COMMAND				    0x004
-#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
-#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
-
-#define MV64460_PCI_SCS_0_BASE_ADDR_LOW				    0x010
-#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
-#define MV64460_PCI_SCS_1_BASE_ADDR_LOW				    0x018
-#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
-#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
-#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
-#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
-#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
-#define MV64460_PCI_CAPABILTY_LIST_POINTER			    0x034
-#define MV64460_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
-       /* capability list */
-#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
-#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
-#define MV64460_PCI_VPD_ADDR					    0x048
-#define MV64460_PCI_VPD_DATA					    0x04c
-#define MV64460_PCI_MSI_MESSAGE_CONTROL				    0x050
-#define MV64460_PCI_MSI_MESSAGE_ADDR				    0x054
-#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
-#define MV64460_PCI_MSI_MESSAGE_DATA				    0x05c
-#define MV64460_PCI_X_COMMAND					    0x060
-#define MV64460_PCI_X_STATUS					    0x064
-#define MV64460_PCI_COMPACT_PCI_HOT_SWAP			    0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define MV64460_PCI_SCS_2_BASE_ADDR_LOW				    0x110
-#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
-#define MV64460_PCI_SCS_3_BASE_ADDR_LOW				    0x118
-#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
-#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
-#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
-#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
-#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
-#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
-#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
-#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
-#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
-#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
-#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
-#define MV64460_PCI_CPU_BASE_ADDR_LOW				    0x220
-#define MV64460_PCI_CPU_BASE_ADDR_HIGH				    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
-#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
-#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
-#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
-#define MV64460_PCI_P2P_I_O_BASE_ADDR				    0x420
-#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
-
-/****************************************/
-/* Messaging Unit Registers (I20)	*/
-/****************************************/
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
-#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
-#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
-
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
-#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
-#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
-#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
-#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
-#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
-#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
-#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
-#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
-#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
-#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
-#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
-#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
-#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
-#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
-#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
-#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
-#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
-#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
-#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
-#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
-#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
-#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
-
-/****************************************/
-/*	  Ethernet Unit Registers		*/
-/****************************************/
-
-#define MV64460_ETH_PHY_ADDR_REG				    0x2000
-#define MV64460_ETH_SMI_REG					    0x2004
-#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
-#define MV64460_ETH_UNIT_DEFAULTID_REG				    0x200c
-#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
-#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
-#define MV64460_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
-#define MV64460_ETH_UNIT_ERROR_ADDR_REG				    0x2094
-#define MV64460_ETH_BAR_0					    0x2200
-#define MV64460_ETH_BAR_1					    0x2208
-#define MV64460_ETH_BAR_2					    0x2210
-#define MV64460_ETH_BAR_3					    0x2218
-#define MV64460_ETH_BAR_4					    0x2220
-#define MV64460_ETH_BAR_5					    0x2228
-#define MV64460_ETH_SIZE_REG_0					    0x2204
-#define MV64460_ETH_SIZE_REG_1					    0x220c
-#define MV64460_ETH_SIZE_REG_2					    0x2214
-#define MV64460_ETH_SIZE_REG_3					    0x221c
-#define MV64460_ETH_SIZE_REG_4					    0x2224
-#define MV64460_ETH_SIZE_REG_5					    0x222c
-#define MV64460_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
-#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
-#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
-#define MV64460_ETH_BASE_ADDR_ENABLE_REG			    0x2290
-#define MV64460_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
-#define MV64460_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
-#define MV64460_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
-#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
-#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
-#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
-#define MV64460_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
-#define MV64460_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
-#define MV64460_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
-#define MV64460_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
-#define MV64460_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
-#define MV64460_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
-#define MV64460_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
-#define MV64460_ETH_DSCP_3(port)				   (0x242c + (port<<10))
-#define MV64460_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
-#define MV64460_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
-#define MV64460_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
-#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
-#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
-#define MV64460_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
-#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
-#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
-#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
-#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
-#define MV64460_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
-#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
-#define MV64460_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
-#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
-#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
-#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
-#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
-#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
-#define MV64460_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
-#define MV64460_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
-#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
-#define MV64460_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
-#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
-#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
-#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
-#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
-#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
-#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
-#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
-#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
-#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
-
-/*******************************************/
-/*	    CUNIT  Registers		   */
-/*******************************************/
-
-	 /* Address Decoding Register Map */
-
-#define MV64460_CUNIT_BASE_ADDR_REG0				    0xf200
-#define MV64460_CUNIT_BASE_ADDR_REG1				    0xf208
-#define MV64460_CUNIT_BASE_ADDR_REG2				    0xf210
-#define MV64460_CUNIT_BASE_ADDR_REG3				    0xf218
-#define MV64460_CUNIT_SIZE0					    0xf204
-#define MV64460_CUNIT_SIZE1					    0xf20c
-#define MV64460_CUNIT_SIZE2					    0xf214
-#define MV64460_CUNIT_SIZE3					    0xf21c
-#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
-#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
-#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
-#define MV64460_MPSC0_ACCESS_PROTECTION_REG			    0xf254
-#define MV64460_MPSC1_ACCESS_PROTECTION_REG			    0xf258
-#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
-
-	/*  Error Report Registers  */
-
-#define MV64460_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
-#define MV64460_CUNIT_INTERRUPT_MASK_REG			    0xf314
-#define MV64460_CUNIT_ERROR_ADDR				    0xf318
-
-	/*  Cunit Control Registers */
-
-#define MV64460_CUNIT_ARBITER_CONTROL_REG			    0xf300
-#define MV64460_CUNIT_CONFIG_REG				    0xb40c
-#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
-
-	/*  Cunit Debug Registers   */
-
-#define MV64460_CUNIT_DEBUG_LOW					    0xf340
-#define MV64460_CUNIT_DEBUG_HIGH				    0xf344
-#define MV64460_CUNIT_MMASK					    0xf380
-
-	/*  Cunit Base Address Enable Window Bits*/
-#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
-#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
-#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
-#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
-
-	/*  MPSCs Clocks Routing Registers  */
-
-#define MV64460_MPSC_ROUTING_REG				    0xb400
-#define MV64460_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
-#define MV64460_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
-
-	/*  MPSCs Interrupts Registers	  */
-
-#define MV64460_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
-#define MV64460_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
-
-#define MV64460_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
-#define MV64460_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
-#define MV64460_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
-#define MV64460_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
-
-	/*  MPSC0 Registers	 */
-
-
-/***************************************/
-/*	    SDMA Registers	       */
-/***************************************/
-
-#define MV64460_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
-#define MV64460_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
-#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
-#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
-#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
-
-#define MV64460_SDMA_CAUSE_REG					    0xb800
-#define MV64460_SDMA_MASK_REG					    0xb880
-
-
-/****************************************/
-/* SDMA Address Space Targets		*/
-/****************************************/
-
-#define MV64460_SDMA_DRAM_CS_0_TARGET				    0x0e00
-#define MV64460_SDMA_DRAM_CS_1_TARGET				    0x0d00
-#define MV64460_SDMA_DRAM_CS_2_TARGET				    0x0b00
-#define MV64460_SDMA_DRAM_CS_3_TARGET				    0x0700
-
-#define MV64460_SDMA_DEV_CS_0_TARGET				    0x1e01
-#define MV64460_SDMA_DEV_CS_1_TARGET				    0x1d01
-#define MV64460_SDMA_DEV_CS_2_TARGET				    0x1b01
-#define MV64460_SDMA_DEV_CS_3_TARGET				    0x1701
-
-#define MV64460_SDMA_BOOT_CS_TARGET				    0x0f00
-
-#define MV64460_SDMA_SRAM_TARGET				    0x0003
-#define MV64460_SDMA_60X_BUS_TARGET				    0x4003
-
-#define MV64460_PCI_0_TARGET					    0x0003
-#define MV64460_PCI_1_TARGET					    0x0004
-
-
-/* Devices BAR and size registers */
-
-#define MV64460_DEV_CS0_BASE_ADDR				    0x028
-#define MV64460_DEV_CS0_SIZE					    0x030
-#define MV64460_DEV_CS1_BASE_ADDR				    0x228
-#define MV64460_DEV_CS1_SIZE					    0x230
-#define MV64460_DEV_CS2_BASE_ADDR				    0x248
-#define MV64460_DEV_CS2_SIZE					    0x250
-#define MV64460_DEV_CS3_BASE_ADDR				    0x038
-#define MV64460_DEV_CS3_SIZE					    0x040
-#define MV64460_BOOTCS_BASE_ADDR				    0x238
-#define MV64460_BOOTCS_SIZE					    0x240
-
-/* SDMA Window access protection */
-#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0
-#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1
-#define MV64460_SDMA_WIN_ACCESS_FULL 2
-
-/* BRG Interrupts */
-
-#define MV64460_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
-#define MV64460_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
-#define MV64460_BRG_CAUSE_REG					    0xb834
-#define MV64460_BRG_MASK_REG					    0xb8b4
-
-/****************************************/
-/* DMA Channel Control			*/
-/****************************************/
-
-#define MV64460_DMA_CHANNEL0_CONTROL				    0x840
-#define MV64460_DMA_CHANNEL0_CONTROL_HIGH			    0x880
-#define MV64460_DMA_CHANNEL1_CONTROL				    0x844
-#define MV64460_DMA_CHANNEL1_CONTROL_HIGH			    0x884
-#define MV64460_DMA_CHANNEL2_CONTROL				    0x848
-#define MV64460_DMA_CHANNEL2_CONTROL_HIGH			    0x888
-#define MV64460_DMA_CHANNEL3_CONTROL				    0x84C
-#define MV64460_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
-
-
-/****************************************/
-/*	     IDMA Registers		*/
-/****************************************/
-
-#define MV64460_DMA_CHANNEL0_BYTE_COUNT				    0x800
-#define MV64460_DMA_CHANNEL1_BYTE_COUNT				    0x804
-#define MV64460_DMA_CHANNEL2_BYTE_COUNT				    0x808
-#define MV64460_DMA_CHANNEL3_BYTE_COUNT				    0x80C
-#define MV64460_DMA_CHANNEL0_SOURCE_ADDR			    0x810
-#define MV64460_DMA_CHANNEL1_SOURCE_ADDR			    0x814
-#define MV64460_DMA_CHANNEL2_SOURCE_ADDR			    0x818
-#define MV64460_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
-#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
-#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
-#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
-#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
-#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
-#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
-#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
-#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
-#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
-#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
-#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
-#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
-
- /*  IDMA Address Decoding Base Address Registers  */
-
-#define MV64460_DMA_BASE_ADDR_REG0				    0xa00
-#define MV64460_DMA_BASE_ADDR_REG1				    0xa08
-#define MV64460_DMA_BASE_ADDR_REG2				    0xa10
-#define MV64460_DMA_BASE_ADDR_REG3				    0xa18
-#define MV64460_DMA_BASE_ADDR_REG4				    0xa20
-#define MV64460_DMA_BASE_ADDR_REG5				    0xa28
-#define MV64460_DMA_BASE_ADDR_REG6				    0xa30
-#define MV64460_DMA_BASE_ADDR_REG7				    0xa38
-
- /*  IDMA Address Decoding Size Address Register   */
-
-#define MV64460_DMA_SIZE_REG0					    0xa04
-#define MV64460_DMA_SIZE_REG1					    0xa0c
-#define MV64460_DMA_SIZE_REG2					    0xa14
-#define MV64460_DMA_SIZE_REG3					    0xa1c
-#define MV64460_DMA_SIZE_REG4					    0xa24
-#define MV64460_DMA_SIZE_REG5					    0xa2c
-#define MV64460_DMA_SIZE_REG6					    0xa34
-#define MV64460_DMA_SIZE_REG7					    0xa3C
-
- /* IDMA Address Decoding High Address Remap and Access
-		  Protection Registers			  */
-
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
-#define MV64460_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
-#define MV64460_DMA_BASE_ADDR_ENABLE_REG			    0xa80
-#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
-#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
-#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
-#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
-#define MV64460_DMA_ARBITER_CONTROL				    0x860
-#define MV64460_DMA_CROSS_BAR_TIMEOUT				    0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
-#define MV64460_DMA_HEADERS_RETARGET_CONTROL			    0xa84
-#define MV64460_DMA_HEADERS_RETARGET_BASE			    0xa88
-
- /*  IDMA Interrupt Register  */
-
-#define MV64460_DMA_INTERRUPT_CAUSE_REG				    0x8c0
-#define MV64460_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
-#define MV64460_DMA_ERROR_ADDR					    0x8c8
-#define MV64460_DMA_ERROR_SELECT				    0x8cc
-
- /*  IDMA Debug Register ( for internal use )	 */
-
-#define MV64460_DMA_DEBUG_LOW					    0x8e0
-#define MV64460_DMA_DEBUG_HIGH					    0x8e4
-#define MV64460_DMA_SPARE					    0xA8C
-
-/****************************************/
-/* Timer_Counter			*/
-/****************************************/
-
-#define MV64460_TIMER_COUNTER0					    0x850
-#define MV64460_TIMER_COUNTER1					    0x854
-#define MV64460_TIMER_COUNTER2					    0x858
-#define MV64460_TIMER_COUNTER3					    0x85C
-#define MV64460_TIMER_COUNTER_0_3_CONTROL			    0x864
-#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
-#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
-
-/****************************************/
-/*	   Watchdog registers		*/
-/****************************************/
-
-#define MV64460_WATCHDOG_CONFIG_REG				    0xb410
-#define MV64460_WATCHDOG_VALUE_REG				    0xb414
-
-/****************************************/
-/* I2C Registers			*/
-/****************************************/
-
-#define MV64460_I2C_SLAVE_ADDR					    0xc000
-#define MV64460_I2C_EXTENDED_SLAVE_ADDR				    0xc010
-#define MV64460_I2C_DATA					    0xc004
-#define MV64460_I2C_CONTROL					    0xc008
-#define MV64460_I2C_STATUS_BAUDE_RATE				    0xc00C
-#define MV64460_I2C_SOFT_RESET					    0xc01c
-
-/****************************************/
-/* GPP Interface Registers		*/
-/****************************************/
-
-#define MV64460_GPP_IO_CONTROL					    0xf100
-#define MV64460_GPP_LEVEL_CONTROL				    0xf110
-#define MV64460_GPP_VALUE					    0xf104
-#define MV64460_GPP_INTERRUPT_CAUSE				    0xf108
-#define MV64460_GPP_INTERRUPT_MASK0				    0xf10c
-#define MV64460_GPP_INTERRUPT_MASK1				    0xf114
-#define MV64460_GPP_VALUE_SET					    0xf118
-#define MV64460_GPP_VALUE_CLEAR					    0xf11c
-
-/****************************************/
-/* Interrupt Controller Registers	*/
-/****************************************/
-
-/****************************************/
-/* Interrupts				*/
-/****************************************/
-
-#define MV64460_MAIN_INTERRUPT_CAUSE_LOW			    0x004
-#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
-#define MV64460_CPU_INTERRUPT0_MASK_LOW				    0x014
-#define MV64460_CPU_INTERRUPT0_MASK_HIGH			    0x01c
-#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
-#define MV64460_CPU_INTERRUPT1_MASK_LOW				    0x034
-#define MV64460_CPU_INTERRUPT1_MASK_HIGH			    0x03c
-#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
-#define MV64460_INTERRUPT0_MASK_0_LOW				    0x054
-#define MV64460_INTERRUPT0_MASK_0_HIGH				    0x05c
-#define MV64460_INTERRUPT0_SELECT_CAUSE				    0x064
-#define MV64460_INTERRUPT1_MASK_0_LOW				    0x074
-#define MV64460_INTERRUPT1_MASK_0_HIGH				    0x07c
-#define MV64460_INTERRUPT1_SELECT_CAUSE				    0x084
-
-/****************************************/
-/*	MPP Interface Registers		*/
-/****************************************/
-
-#define MV64460_MPP_CONTROL0					    0xf000
-#define MV64460_MPP_CONTROL1					    0xf004
-#define MV64460_MPP_CONTROL2					    0xf008
-#define MV64460_MPP_CONTROL3					    0xf00c
-
-/****************************************/
-/*    Serial Initialization registers	*/
-/****************************************/
-
-#define MV64460_SERIAL_INIT_LAST_DATA				    0xf324
-#define MV64460_SERIAL_INIT_CONTROL				    0xf328
-#define MV64460_SERIAL_INIT_STATUS				    0xf32c
-
-
-#endif /* __INCgt64460rh */
diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c
deleted file mode 100644
index 6cebd1aeb6..0000000000
--- a/board/prodrive/p3mx/p3mx.c
+++ /dev/null
@@ -1,809 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Based on original work by
- *	Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
- *	Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
- * modifications for the cpci750 by reinhard.arlt@esd-electronics.com
- * modifications for the P3M750 by roel.loeffen@prodrive.nl
- */
-
-/*
- * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448.
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../../Marvell/include/memory.h"
-#include "../../Marvell/include/pci.h"
-#include "../../Marvell/include/mv_gen_reg.h"
-#include <net.h>
-#include <i2c.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "64460.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	DEBUG
-/*#define	DEBUG */
-
-#ifdef CONFIG_PCI
-#define	MAP_PCI
-#endif /* of CONFIG_PCI */
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-extern flash_info_t flash_info[];
-
-/* ------------------------------------------------------------------------- */
-
-/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
-
-/* Unfortunately, we cant change it while we are in flash, so we initialize it
- * to the "final" value. This means that any debug_led calls before
- * board_early_init_f wont work right (like in cpu_init_f).
- * See also my_remap_gt_regs below. (NTL)
- */
-
-void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
-int display_mem_map (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This is a version of the GT register space remapping function that
- * doesn't touch globals (meaning, it's ok to run from flash.)
- *
- * Unfortunately, this has the side effect that a writable
- * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
- */
-
-void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	/* check and see if it's already moved */
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
-}
-
-#ifdef CONFIG_PCI
-
-static void gt_pci_config (void)
-{
-	unsigned int stat;
-	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, */
-					/* FuncNum 10:8, RegNum 7:2 */
-
-	/*
-	 * In PCIX mode devices provide their own bus and device numbers.
-	 * We query the Discovery II's
-	 * config registers by writing ones to the bus and device.
-	 * We then update the Virtual register with the correct value for the
-	 * bus and device.
-	 */
-	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/* if  PCI-X */
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-
-		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-
-	}
-	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/* if  PCI-X */
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
-
-		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
-		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
-	}
-
-	/* Enable master */
-	PCI_MASTER_ENABLE (0, SELF);
-	PCI_MASTER_ENABLE (1, SELF);
-
-	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
-	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
-	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) |
-		(1 << 18);
-	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
-	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
-
-	/* ronen:
-	 * add write to pci remap registers for 64460.
-	 * in 64360 when writing to pci base go and overide remap automaticaly,
-	 * in 64460 it doesn't
-	 */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
-
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
-
-	/* PCI interface settings */
-	/* Timeout set to retry forever */
-	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
-	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
-
-	/* ronen - enable only CS0 and Internal reg!! */
-	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
-
-	/* ronen:
-	 * update the pci internal registers base address.
-	 */
-#ifdef MAP_PCI
-	for (stat = 0; stat <= PCI_HOST1; stat++)
-		pciWriteConfigReg (stat,
-				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
-#endif
-
-}
-#endif
-
-/* Setup CPU interface paramaters */
-static void gt_cpu_config (void)
-{
-	cpu_t cpu = get_cpu_type ();
-	ulong tmp;
-
-	/* cpu configuration register */
-	tmp = GTREGREAD (CPU_CONFIGURATION);
-	/* set the SINGLE_CPU bit  see MV64460 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
-	tmp |= CPU_CONF_SINGLE_CPU;
-#endif
-	tmp &= ~CPU_CONF_AACK_DELAY_2;
-	tmp |= CPU_CONF_DP_VALID;
-	tmp |= CPU_CONF_AP_VALID;
-	tmp |= CPU_CONF_PIPELINE;
-	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
-
-	/* CPU master control register */
-	tmp = GTREGREAD (CPU_MASTER_CONTROL);
-	tmp |= CPU_MAST_CTL_ARB_EN;
-
-	if ((cpu == CPU_7400) ||
-	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
-
-		tmp |= CPU_MAST_CTL_CLEAN_BLK;
-		tmp |= CPU_MAST_CTL_FLUSH_BLK;
-
-	} else {
-		/* cleanblock must be cleared for CPUs
-		 * that do not support this command (603e, 750)
-		 * see Res#1 */
-		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
-		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
-	}
-	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
-}
-
-/*
- * board_early_init_f.
- *
- * set up gal. device mappings, etc.
- */
-int board_early_init_f (void)
-{
-	/* set up the GT the way the kernel wants it
-	 * the call to move the GT register space will obviously
-	 * fail if it has already been done, but we're going to assume
-	 * that if it's not at the power-on location, it's where we put
-	 * it last time. (huber)
-	 */
-
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
-
-#ifdef CONFIG_PCI
-	gt_pci_config ();
-#endif
-	/* mask all external interrupt sources */
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
-	/* new in >MV6436x */
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
-	/* --------------------- */
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
-	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
-
-	/* Device and Boot bus settings
-	 */
-	memoryMapDeviceSpace(DEVICE0, 0, 0);
-	GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0);
-	memoryMapDeviceSpace(DEVICE1, 0, 0);
-	GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0);
-	memoryMapDeviceSpace(DEVICE2, 0, 0);
-	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0);
-	memoryMapDeviceSpace(DEVICE3, 0, 0);
-	GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0);
-
-	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR);
-
-	gt_cpu_config();
-
-	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
-
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
-
-	return 0;
-}
-
-/* various things to do after relocation */
-
-int misc_init_r ()
-{
-	u8 val;
-
-	icache_enable ();
-#ifdef CFG_L2
-	l2cache_enable ();
-#endif
-#ifdef CONFIG_MPSC
-	mpsc_sdma_init ();
-	mpsc_init2 ();
-#endif
-
-	/*
-	 * Enable trickle changing in RTC upon powerup
-	 * No diode, 250 ohm series resistor
-	 */
-	val = 0xa5;
-	i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1);
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	/* now relocate the debug serial driver */
-	mpsc_putchar += gd->reloc_off;
-	mpsc_getchar += gd->reloc_off;
-	mpsc_test_char += gd->reloc_off;
-
-	return 0;
-}
-
-void after_reloc (ulong dest_addr, gd_t * gd)
-{
-	memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
-
-/*	display_mem_map(); */
-
-	/* now, jump to the main U-Boot board init code */
-	board_init_r (gd, dest_addr);
-	/* NOTREACHED */
-}
-
-/*
- * Check Board Identity:
- * right now, assume borad type. (there is just one...after all)
- */
-
-int checkboard (void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: %s", CFG_BOARD_NAME);
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/* utility functions */
-void debug_led (int led, int mode)
-{
-}
-
-int display_mem_map (void)
-{
-	int i, j;
-	unsigned int base, size, width;
-
-	/* SDRAM */
-	printf ("SD (DDR) RAM\n");
-	for (i = 0; i <= BANK3; i++) {
-		base = memoryGetBankBaseAddress (i);
-		size = memoryGetBankSize (i);
-		if (size != 0)
-			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
-				i, base, size >> 20);
-	}
-#ifdef CONFIG_PCI
-	/* CPU's PCI windows */
-	for (i = 0; i <= PCI_HOST1; i++) {
-		printf ("\nCPU's PCI %d windows\n", i);
-		base = pciGetSpaceBase (i, PCI_IO);
-		size = pciGetSpaceSize (i, PCI_IO);
-		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
-			size >> 20);
-		/* ronen currently only first PCI MEM is used 3 */
-		for (j = 0; j <= PCI_REGION0; j++) {
-			base = pciGetSpaceBase (i, j);
-			size = pciGetSpaceSize (i, j);
-			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",
-				j, base, size >> 20);
-		}
-	}
-#endif /* of CONFIG_PCI */
-
-	/* Bootrom */
-	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
-	size = memoryGetDeviceSize (BOOT_DEVICE);
-	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
-	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\t- FLASH\n",
-		base, size >> 20, width);
-
-	return (0);
-}
-
-/* DRAM check routines copied from gw8260 */
-
-#if defined (CFG_DRAM_TEST)
-
-/*********************************************************************/
-/* NAME:  move64() -  moves a double word (64-bit)		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   this function performs a double word move from the data at	     */
-/*   the source pointer to the location at the destination pointer.  */
-/*								     */
-/* INPUTS:							     */
-/*   unsigned long long *src  - pointer to data to move		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   unsigned long long *dest - pointer to locate to move data	     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   May cloober fr0.						     */
-/*								     */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
-	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
-	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
-	     : : : "fr0");		/* Clobbers fr0         */
-	return;
-}
-
-
-#if defined (CFG_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaaULL,
-	0xccccccccccccccccULL,
-	0xf0f0f0f0f0f0f0f0ULL,
-	0xff00ff00ff00ff00ULL,
-	0xffff0000ffff0000ULL,
-	0xffffffff00000000ULL,
-	0x00000000ffffffffULL,
-	0x0000ffff0000ffffULL,
-	0x00ff00ff00ff00ffULL,
-	0x0f0f0f0f0f0f0f0fULL,
-	0x3333333333333333ULL,
-	0x5555555555555555ULL
-};
-
-/*********************************************************************/
-/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Tests data lines for shorts and opens by forcing adjacent data  */
-/*   to opposite states. Because the data lines could be routed in   */
-/*   an arbitrary manner the must ensure test patterns ensure that   */
-/*   every case is tested. By using the following series of binary   */
-/*   patterns every combination of adjacent bits is test regardless  */
-/*   of routing.						     */
-/*								     */
-/*     ...101010101010101010101010				     */
-/*     ...110011001100110011001100				     */
-/*     ...111100001111000011110000				     */
-/*     ...111111110000000011111111				     */
-/*								     */
-/*   Carrying this out, gives us six hex patterns as follows:	     */
-/*								     */
-/*     0xaaaaaaaaaaaaaaaa					     */
-/*     0xcccccccccccccccc					     */
-/*     0xf0f0f0f0f0f0f0f0					     */
-/*     0xff00ff00ff00ff00					     */
-/*     0xffff0000ffff0000					     */
-/*     0xffffffff00000000					     */
-/*								     */
-/*   The number test patterns will always be given by:		     */
-/*								     */
-/*   log(base 2)(number data bits) = log2 (64) = 6		     */
-/*								     */
-/*   To test for short and opens to other signals on our boards. we  */
-/*   simply							     */
-/*   test with the 1's complemnt of the paterns as well.	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern				     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*  Assumes only one one SDRAM bank				     */
-/*								     */
-/*********************************************************************/
-int mem_test_data (void)
-{
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
-	unsigned long long temp64 = 0;
-	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
-	int i;
-	unsigned int hi, lo;
-
-	for (i = 0; i < num_patterns; i++) {
-		move64 (&(pattern[i]), pmem);
-		move64 (pmem, &temp64);
-
-		/* hi = (temp64>>32) & 0xffffffff;          */
-		/* lo = temp64 & 0xffffffff;                */
-		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
-		hi = (pattern[i] >> 32) & 0xffffffff;
-		lo = pattern[i] & 0xffffffff;
-		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
-
-		if (temp64 != pattern[i]) {
-			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
-				hi, lo);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_DATA */
-
-#if defined (CFG_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME:  mem_test_address() -	test address lines		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function performs a test to verify that each word im	     */
-/*   memory is uniquly addressable. The test sequence is as follows: */
-/*								     */
-/*   1) write the address of each word to each word.		     */
-/*   2) verify that each location equals its address		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_address (void)
-{
-	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
-	unsigned int i;
-
-	/* write address to each location */
-	for (i = 0; i < size; i++)
-		pmem[i] = i;
-
-	/* verify each loaction */
-	for (i = 0; i < size; i++) {
-		if (pmem[i] != i) {
-			printf ("\n   Address Test Failed at 0x%x", i);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_ADDRESS */
-
-#if defined (CFG_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME:   mem_march() -  memory march				     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Marches up through memory. At each location verifies rmask if   */
-/*   read = 1. At each location write wmask if	write = 1. Displays  */
-/*   failing address and pattern.				     */
-/*								     */
-/* INPUTS:							     */
-/*   volatile unsigned long long * base - start address of test	     */
-/*   unsigned int size - number of dwords(64-bit) to test	     */
-/*   unsigned long long rmask - read verify mask		     */
-/*   unsigned long long wmask - wrtie verify mask		     */
-/*   short read - verifies rmask if read = 1			     */
-/*   short write  - writes wmask if write = 1			     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
-	       unsigned int size,
-	       unsigned long long rmask,
-	       unsigned long long wmask, short read, short write)
-{
-	unsigned int i;
-	unsigned long long temp = 0;
-	unsigned int hitemp, lotemp, himask, lomask;
-
-	for (i = 0; i < size; i++) {
-		if (read != 0) {
-			/* temp = base[i]; */
-			move64 ((unsigned long long *) &(base[i]), &temp);
-			if (rmask != temp) {
-				hitemp = (temp >> 32) & 0xffffffff;
-				lotemp = temp & 0xffffffff;
-				himask = (rmask >> 32) & 0xffffffff;
-				lomask = rmask & 0xffffffff;
-
-				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
-				return 1;
-			}
-		}
-		if (write != 0) {
-			/*  base[i] = wmask; */
-			move64 (&wmask, (unsigned long long *) &(base[i]));
-		}
-	}
-	return 0;
-}
-#endif /* CFG_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME:   mem_test_walk() -  a simple walking ones test	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Performs a walking ones through entire physical memory. The     */
-/*   test uses as series of memory marches, mem_march(), to verify   */
-/*   and write the test patterns to memory. The test sequence is as  */
-/*   follows:							     */
-/*     1) march writing 0000...0001				     */
-/*     2) march verifying 0000...0001  , writing  0000...0010	     */
-/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
-/*	   the write mask equals 1000...0000			     */
-/*     4) march verifying 1000...0000				     */
-/*   The test fails if any of the memory marches return a failure.   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays which pass on the memory test is executing	     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_walk (void)
-{
-	unsigned long long mask;
-	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
-
-	unsigned int i;
-
-	mask = 0x01;
-
-	printf ("Initial Pass");
-	mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-	printf ("		");
-	printf ("         ");
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
-	for (i = 0; i < 63; i++) {
-		printf ("Pass %2d", i + 2);
-		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
-			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
-			return 1;
-		}
-		mask = mask << 1;
-		printf ("\b\b\b\b\b\b\b");
-	}
-
-	printf ("Last Pass");
-	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
-		/* printf("mask: 0x%x", mask); */
-		return 1;
-	}
-	printf ("\b\b\b\b\b\b\b\b\b");
-	printf ("	     ");
-	printf ("\b\b\b\b\b\b\b\b\b");
-
-	return 0;
-}
-
-/*********************************************************************/
-/* NAME:    testdram() -  calls any enabled memory tests	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Runs memory tests if the environment test variables are set to  */
-/*   'y'.							     */
-/*								     */
-/* INPUTS:							     */
-/*   testdramdata    - If set to 'y', data test is run.		     */
-/*   testdramaddress - If set to 'y', address test is run.	     */
-/*   testdramwalk    - If set to 'y', walking ones test is run	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int testdram (void)
-{
-	char *s;
-	int rundata    = 0;
-	int runaddress = 0;
-	int runwalk    = 0;
-
-#ifdef CFG_DRAM_TEST_DATA
-	s = getenv ("testdramdata");
-	rundata = (s && (*s == 'y')) ? 1 : 0;
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	s = getenv ("testdramaddress");
-	runaddress = (s && (*s == 'y')) ? 1 : 0;
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	s = getenv ("testdramwalk");
-	runwalk = (s && (*s == 'y')) ? 1 : 0;
-#endif
-
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  "
-			"(don't panic... that will take a moment !!!!)\n",
-			CFG_MEMTEST_START, CFG_MEMTEST_END);
-#ifdef CFG_DRAM_TEST_DATA
-	if (rundata == 1) {
-		printf ("Test DATA ...  ");
-		if (mem_test_data () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
-	if (runaddress == 1) {
-		printf ("Test ADDRESS ...  ");
-		if (mem_test_address () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-#ifdef CFG_DRAM_TEST_WALK
-	if (runwalk == 1) {
-		printf ("Test WALKING ONEs ...  ");
-		if (mem_test_walk () == 1) {
-			printf ("failed \n");
-			return 1;
-		} else
-			printf ("ok \n");
-	}
-#endif
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
-		printf ("passed\n");
-	return 0;
-
-}
-#endif /* CFG_DRAM_TEST */
-
-/* ronen - the below functions are used by the bootm function           */
-/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
-/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
-/*    the kernel data areas.                                            */
-/*  - we diable and invalidate the icache and dcache.                   */
-void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
-{
-	u32 temp;
-
-	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
-	if ((temp & 0xffff) == new_loc >> 16)
-		return;
-
-	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
-		0xffff0000) | (new_loc >> 16);
-
-	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
-
-	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
-							new_loc |
-							(INTERNAL_SPACE_DECODE)))))
-	       != temp);
-
-}
diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c
deleted file mode 100644
index 3a3d7fd569..0000000000
--- a/board/prodrive/p3mx/pci.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/* PCI.c - PCI functions */
-
-
-#include <common.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-
-#ifdef CONFIG_PCI_PNP
-void pciauto_config_init(struct pci_controller *hose);
-int  pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
-#endif
-
-#include "../../Marvell/include/pci.h"
-
-#undef DEBUG
-#undef IDE_SET_NATIVE_MODE
-static unsigned int local_buses[] = { 0, 0 };
-
-static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
-	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
-};
-
-#ifdef CONFIG_USE_CPCIDVI
-typedef struct {
-	unsigned int base;
-	unsigned int init;
-} GT_CPCIDVI_ROM_T;
-
-static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
-#endif
-
-#ifdef DEBUG
-static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
-static void gt_pci_bus_mode_display (PCI_HOST host)
-{
-	unsigned int mode;
-
-
-	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
-	switch (mode) {
-	case 0:
-		printf ("PCI %d bus mode: Conventional PCI\n", host);
-		break;
-	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
-		break;
-	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
-		break;
-	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
-		break;
-	default:
-		printf ("Unknown BUS %d\n", mode);
-	}
-}
-#endif
-
-static const unsigned int pci_p2p_configuration_reg[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static const unsigned int pci_configuration_address[] = {
-	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
-};
-
-static const unsigned int pci_configuration_data[] = {
-	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
-	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
-};
-
-static const unsigned int pci_error_cause_reg[] = {
-	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
-};
-
-static const unsigned int pci_arbiter_control[] = {
-	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
-};
-
-static const unsigned int pci_address_space_en[] = {
-	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
-};
-
-static const unsigned int pci_snoop_control_base_0_low[] = {
-	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_snoop_control_top_0[] = {
-	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
-};
-
-static const unsigned int pci_access_control_base_0_low[] = {
-	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_access_control_top_0[] = {
-	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
-};
-
-static const unsigned int pci_scs_bank_size[2][4] = {
-	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
-	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
-	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
-	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
-};
-
-static const unsigned int pci_p2p_configuration[] = {
-	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-
-/********************************************************************
-* pciWriteConfigReg - Write to a PCI configuration register
-*		    - Make sure the GT is configured as a master before writing
-*		      to another device on the PCI.
-*		    - The function takes care of Big/Little endian conversion.
-*
-*
-* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
-*		   (or any other PCI device spec)
-*	    pciDevNum: The device number needs to be addressed.
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
-			unsigned int pciDevNum, unsigned int data)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-	unsigned int addr;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &addr);
-	if (addr != DataForAddrReg)
-		return;
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-/********************************************************************
-* pciReadConfigReg  - Read from a PCI0 configuration register
-*		    - Make sure the GT is configured as a master before reading
-*		      from another device on the PCI.
-*		    - The function takes care of Big/Little endian conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*			spec)
-*	    pciDevNum: The device number needs to be addressed.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*		  cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
-			       unsigned int pciDevNum)
-{
-	volatile unsigned int DataForAddrReg;
-	unsigned int data;
-	unsigned int functionNum;
-	unsigned int busNum = 0;
-
-	if (pciDevNum > 32)	/* illegal device Number */
-		return 0xffffffff;
-	if (pciDevNum == SELF) {	/* configure our configuration space. */
-		pciDevNum =
-			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
-			0x1f;
-		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
-			0xff0000;
-	}
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xfc;
-	DataForAddrReg =
-		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
-	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
-	GT_REG_READ (pci_configuration_address[host], &data);
-	if (data != DataForAddrReg)
-		return 0xffffffff;
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-/********************************************************************
-* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-*				the agent is placed on another Bus. For more
-*				information read P2P in the PCI spec.
-*
-* Inputs:   unsigned int regOffset - The register offset as it apears in the
-*	    GT spec (or any other PCI device spec).
-*	    unsigned int pciDevNum - The device number needs to be addressed.
-*	    unsigned int busNum - On which bus does the Target agent connect
-*				  to.
-*	    unsigned int data - data to be written.
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
-*   PCI spec referring to P2P.
-*
-*********************************************************************/
-void pciOverBridgeWriteConfigReg (PCI_HOST host,
-				  unsigned int regOffset,
-				  unsigned int pciDevNum,
-				  unsigned int busNum, unsigned int data)
-{
-	unsigned int DataForReg;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
-	} else {
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT31 | BIT0;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-
-/********************************************************************
-* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
-*				the agent target locate on another PCI bus.
-*			      - Make sure the GT is configured as a master
-*				before reading from another device on the PCI.
-*			      - The function takes care of Big/Little endian
-*				conversion.
-* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*			 spec). (configuration register offset.)
-*	    pciDevNum: The device number needs to be addressed.
-*	    busNum: the Bus number where the agent is place.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*		  cause register to make sure the data is valid
-*
-*  Configuration Address 0xCF8:
-*
-*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
-*  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
-*
-*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
-					 unsigned int regOffset,
-					 unsigned int pciDevNum,
-					 unsigned int busNum)
-{
-	unsigned int DataForReg;
-	unsigned int data;
-	unsigned int functionNum;
-
-	functionNum = regOffset & 0x00000700;
-	pciDevNum = pciDevNum << 11;
-	regOffset = regOffset & 0xff;
-	busNum = busNum << 16;
-	if (pciDevNum == SELF) {	/* This board */
-		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
-	} else {		/* agent on another bus */
-
-		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
-			BIT0 | BIT31;
-	}
-	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
-	GT_REG_READ (pci_configuration_data[host], &data);
-	return data;
-}
-
-
-/********************************************************************
-* pciGetRegOffset - Gets the register offset for this region config.
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI register base address
-*********************************************************************/
-static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_LOW_DECODE_ADDRESS;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
-		}
-	}
-	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-}
-
-static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
-{
-	switch (host) {
-	case PCI_HOST0:
-		switch (region) {
-		case PCI_IO:
-			return PCI_0I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_0MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_0MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_0MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_0MEMORY3_ADDRESS_REMAP;
-		}
-	case PCI_HOST1:
-		switch (region) {
-		case PCI_IO:
-			return PCI_1I_O_ADDRESS_REMAP;
-		case PCI_REGION0:
-			return PCI_1MEMORY0_ADDRESS_REMAP;
-		case PCI_REGION1:
-			return PCI_1MEMORY1_ADDRESS_REMAP;
-		case PCI_REGION2:
-			return PCI_1MEMORY2_ADDRESS_REMAP;
-		case PCI_REGION3:
-			return PCI_1MEMORY3_ADDRESS_REMAP;
-		}
-	}
-	return PCI_0MEMORY0_ADDRESS_REMAP;
-}
-
-/********************************************************************
-* pciGetBaseAddress - Gets the base address of a PCI.
-*	    - If the PCI size is 0 then this base address has no meaning!!!
-*
-*
-* INPUT:   Bus, Region - The bus and region we ask for its base address.
-* OUTPUT:   N/A
-* RETURNS: PCI base address.
-*********************************************************************/
-unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int regBase;
-	unsigned int regEnd;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &regBase);
-	GT_REG_READ (regOffset + 8, &regEnd);
-
-	if (regEnd <= regBase)
-		return 0xffffffff;	/* ERROR !!! */
-
-	regBase = regBase << 16;
-	return regBase;
-}
-
-bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
-		  unsigned int bankBase, unsigned int bankLength)
-{
-	unsigned int low = 0xfff;
-	unsigned int high = 0x0;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-	unsigned int remapOffset = pciGetRemapOffset (host, region);
-
-	if (bankLength != 0) {
-		low = (bankBase >> 16) & 0xffff;
-		high = ((bankBase + bankLength) >> 16) - 1;
-	}
-
-	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
-	GT_REG_WRITE (regOffset + 8, high);
-
-	if (bankLength != 0) {	/* must do AFTER writing maps */
-		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
-								   dont support upper 32
-								   in this driver */
-	}
-	return true;
-}
-
-unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	return (low & 0xffff) << 16;
-}
-
-unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
-{
-	unsigned int low, high;
-	unsigned int regOffset = pciGetRegOffset (host, region);
-
-	GT_REG_READ (regOffset, &low);
-	GT_REG_READ (regOffset + 8, &high);
-	return ((high & 0xffff) + 1) << 16;
-}
-
-
-/* ronen - 7/Dec/03*/
-/********************************************************************
-* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
-* Inputs: one of the PCI BAR
-*********************************************************************/
-void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
-{
-	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
-}
-
-/********************************************************************
-* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
-*
-* Inputs: base and size of PCI SCS
-*********************************************************************/
-void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
-		       unsigned int pciDramBase, unsigned int pciDramSize)
-{
-	/*ronen different function for 3rd bank. */
-	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
-
-	pciDramBase = pciDramBase & 0xfffff000;
-	pciDramBase = pciDramBase | (pciReadConfigReg (host,
-						       PCI_SCS_0_BASE_ADDRESS
-						       + offset,
-						       SELF) & 0x00000fff);
-	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
-			   pciDramBase);
-	if (pciDramSize == 0)
-		pciDramSize++;
-	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
-	gtPciEnableInternalBAR (host, bank);
-}
-
-/********************************************************************
-* pciSetRegionFeatures - This function modifys one of the 8 regions with
-*			  feature bits given as an input.
-*			- Be advised to check the spec before modifying them.
-* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-*	  unsigned int features - See file: pci.h there are defintion for those
-*				  region features.
-*	  unsigned int baseAddress - The region base Address.
-*	  unsigned int topAddress - The region top Address.
-* Returns: false if one of the parameters is erroneous true otherwise.
-*********************************************************************/
-bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
-			   unsigned int features, unsigned int baseAddress,
-			   unsigned int regionLength)
-{
-	unsigned int accessLow;
-	unsigned int accessHigh;
-	unsigned int accessTop = baseAddress + regionLength;
-
-	if (regionLength == 0) {	/* close the region. */
-		pciDisableAccessRegion (host, region);
-		return true;
-	}
-	/* base Address is store is bits [11:0] */
-	accessLow = (baseAddress & 0xfff00000) >> 20;
-	/* All the features are update according to the defines in pci.h (to be on
-	   the safe side we disable bits: [11:0] */
-	accessLow = accessLow | (features & 0xfffff000);
-	/* write to the Low Access Region register */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      accessLow);
-
-	accessHigh = (accessTop & 0xfff00000) >> 20;
-
-	/* write to the High Access Region register */
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
-		      accessHigh - 1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableAccessRegion - Disable The given Region by writing MAX size
-*			    to its low Address and MIN size to its high Address.
-*
-* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
-* Returns:  N/A.
-*********************************************************************/
-void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
-{
-	/* writing back the registers default values. */
-	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
-		      0x01001fff);
-	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
-}
-
-/********************************************************************
-* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciArbiterEnable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
-	return true;
-}
-
-/********************************************************************
-* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
-*
-* Inputs:   N/A
-* Returns:  true
-*********************************************************************/
-bool pciArbiterDisable (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
-	return true;
-}
-
-/********************************************************************
-* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
-*
-* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
-*	    PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
-*	    PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
-*	    PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
-*	    PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
-*	    PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
-*	    PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
-				  PCI_AGENT_PRIO externalAgent0,
-				  PCI_AGENT_PRIO externalAgent1,
-				  PCI_AGENT_PRIO externalAgent2,
-				  PCI_AGENT_PRIO externalAgent3,
-				  PCI_AGENT_PRIO externalAgent4,
-				  PCI_AGENT_PRIO externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
-		(externalAgent1 << 9) + (externalAgent2 << 10) +
-		(externalAgent3 << 11) + (externalAgent4 << 12) +
-		(externalAgent5 << 13);
-	regData = (regData & 0xffffc07f) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
-	return true;
-}
-
-/********************************************************************
-* pciParkingDisable - Park on last option disable, with this function you can
-*		       disable the park on last mechanism for each agent.
-*		       disabling this option for all agents results parking
-*		       on the internal master.
-*
-* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
-*	  PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-*	  PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-*	  PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-*	  PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-*	  PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-*	  PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
-* Returns:  true
-*********************************************************************/
-bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
-			PCI_AGENT_PARK externalAgent0,
-			PCI_AGENT_PARK externalAgent1,
-			PCI_AGENT_PARK externalAgent2,
-			PCI_AGENT_PARK externalAgent3,
-			PCI_AGENT_PARK externalAgent4,
-			PCI_AGENT_PARK externalAgent5)
-{
-	unsigned int regData;
-	unsigned int writeData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
-		(externalAgent1 << 16) + (externalAgent2 << 17) +
-		(externalAgent3 << 18) + (externalAgent4 << 19) +
-		(externalAgent5 << 20);
-	regData = (regData & ~(0x7f << 14)) | writeData;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
-*			respond to grant assertion within a window specified in
-*			the input value: 'brokenValue'.
-*
-* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
-*			grant without asserting frame.
-* Returns:  Error for illegal broken value otherwise true.
-*********************************************************************/
-bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
-{
-	unsigned int data;
-	unsigned int regData;
-
-	if (brokenValue > 0xf)
-		return false;	/* brokenValue must be 4 bit */
-	data = brokenValue << 3;
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = (regData & 0xffffff87) | data;
-	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
-	return true;
-}
-
-/********************************************************************
-* pciDisableBrokenAgentDetection - This function disable the Broken agent
-*			    Detection mechanism.
-*			    NOTE: This operation may cause a dead lock on the
-*			    pci0 arbitration.
-*
-* Inputs:   N/A
-* Returns:  true.
-*********************************************************************/
-bool pciDisableBrokenAgentDetection (PCI_HOST host)
-{
-	unsigned int regData;
-
-	GT_REG_READ (pci_arbiter_control[host], &regData);
-	regData = regData & 0xfffffffd;
-	GT_REG_WRITE (pci_arbiter_control[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciP2PConfig - This function set the PCI_n P2P configurate.
-*		  For more information on the P2P read PCI spec.
-*
-* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
-*				       Boundry.
-*	   unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
-*				       Boundry.
-*	   unsigned int busNum - The CPI bus number to which the PCI interface
-*				       is connected.
-*	   unsigned int devNum - The PCI interface's device number.
-*
-* Returns:  true.
-*********************************************************************/
-bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
-		   unsigned int SecondBusHigh,
-		   unsigned int busNum, unsigned int devNum)
-{
-	unsigned int regData;
-
-	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
-		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
-	GT_REG_WRITE (pci_p2p_configuration[host], regData);
-	return true;
-}
-
-/********************************************************************
-* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-*			   supports Cache Coherency in the PCI_n interface.
-* Inputs: region - One of the four regions.
-*	  snoopType - There is four optional Types:
-*			 1. No Snoop.
-*			 2. Snoop to WT region.
-*			 3. Snoop to WB region.
-*			 4. Snoop & Invalidate to WB region.
-*	  baseAddress - Base Address of this region.
-*	  regionLength - Region length.
-* Returns: false if one of the parameters is wrong otherwise return true.
-*********************************************************************/
-bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
-			    PCI_SNOOP_TYPE snoopType,
-			    unsigned int baseAddress,
-			    unsigned int regionLength)
-{
-	unsigned int snoopXbaseAddress;
-	unsigned int snoopXtopAddress;
-	unsigned int data;
-	unsigned int snoopHigh = baseAddress + regionLength;
-
-	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
-		return false;
-	snoopXbaseAddress =
-		pci_snoop_control_base_0_low[host] + 0x10 * region;
-	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
-	if (regionLength == 0) {	/* closing the region */
-		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
-		GT_REG_WRITE (snoopXtopAddress, 0);
-		return true;
-	}
-	baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
-	data = (baseAddress >> 20) | snoopType << 12;
-	GT_REG_WRITE (snoopXbaseAddress, data);
-	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
-	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
-	return true;
-}
-
-static int gt_read_config_dword (struct pci_controller *hose,
-				 pci_dev_t dev, int offset, u32 * value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-					   PCI_DEV (dev));
-	} else {
-		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
-						     cfg_addr, offset,
-						     PCI_DEV (dev), bus);
-	}
-
-	return 0;
-}
-
-static int gt_write_config_dword (struct pci_controller *hose,
-				  pci_dev_t dev, int offset, u32 value)
-{
-	int bus = PCI_BUS (dev);
-
-	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
-				   PCI_DEV (dev), value);
-	} else {
-		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
-					     offset, PCI_DEV (dev), bus,
-					     value);
-	}
-	return 0;
-}
-
-
-static void gt_setup_ide (struct pci_controller *hose,
-			  pci_dev_t dev, struct pci_config_table *entry)
-{
-	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
-	u32 bar_response, bar_value;
-	int bar;
-
-	for (bar = 0; bar < 6; bar++) {
-		/*ronen different function for 3rd bank. */
-		unsigned int offset =
-			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
-
-		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
-					     0x0);
-		pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
-					    &bar_response);
-
-		pciauto_region_allocate (bar_response &
-					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
-					 pci_io : hose->pci_mem, ide_bar[bar],
-					 &bar_value);
-
-		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
-					     bar_value);
-	}
-}
-
-#ifdef CONFIG_USE_CPCIDVI
-static void gt_setup_cpcidvi (struct pci_controller *hose,
-			      pci_dev_t dev, struct pci_config_table *entry)
-{
-	u32		  bar_value, pci_response;
-
-	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
-	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
-	pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
-	pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
-	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
-	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
-	pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
-	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
-	gt_cpcidvi_rom.base = bar_value & 0xffffff00;
-	gt_cpcidvi_rom.init = 1;
-}
-
-unsigned char gt_cpcidvi_in8(unsigned int offset)
-{
-	unsigned char	  data;
-
-	if (gt_cpcidvi_rom.init == 0) {
-		return(0);
-		}
-	data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
-	return(data);
-}
-
-void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
-{
-	unsigned int	  off;
-
-	if (gt_cpcidvi_rom.init == 0) {
-		return;
-	}
-	off = data;
-	off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
-	in8(off);
-	return;
-}
-#endif
-
-/* TODO BJW: Change this for DB64360. This was pulled from the EV64260	*/
-/* and is curently not called *. */
-
-struct pci_config_table gt_config_table[] = {
-#ifdef CONFIG_USE_CPCIDVI
-	{PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
-#endif
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-	{}
-};
-
-struct pci_controller pci0_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-struct pci_controller pci1_hose = {
-/*    fixup_irq: gt_fixup_irq, */
-	config_table:gt_config_table,
-};
-
-void pci_init_board (void)
-{
-	unsigned int command;
-#ifdef CONFIG_PCI_PNP
-	unsigned int bar;
-#endif
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST0);
-#endif
-#ifdef CONFIG_USE_CPCIDVI
-	gt_cpcidvi_rom.init = 0;
-	gt_cpcidvi_rom.base = 0;
-#endif
-
-	pci0_hose.config_table = gt_config_table;
-	pci1_hose.config_table = gt_config_table;
-
-#ifdef CONFIG_USE_CPCIDVI
-	gt_config_table[0].config_device =  gt_setup_cpcidvi;
-#endif
-	gt_config_table[1].config_device =  gt_setup_ide;
-
-	pci0_hose.first_busno = 0;
-	pci0_hose.last_busno = 0xff;
-	local_buses[0] = pci0_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci0_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-	pci0_hose.region_count = 2;
-
-	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
-
-	pci_register_hose (&pci0_hose);
-	pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */
-	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
-#ifdef CONFIG_PCI_PNP
-	pciauto_config_init(&pci0_hose);
-	pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
-#endif
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
-
-#ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST1);
-#endif
-	pci1_hose.first_busno = pci0_hose.last_busno + 1;
-	pci1_hose.last_busno = 0xff;
-	pci1_hose.current_busno = pci1_hose.first_busno;
-	local_buses[1] = pci1_hose.first_busno;
-
-	/* PCI memory space */
-	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
-
-	pci_set_ops (&pci1_hose,
-		     pci_hose_read_config_byte_via_dword,
-		     pci_hose_read_config_word_via_dword,
-		     gt_read_config_dword,
-		     pci_hose_write_config_byte_via_dword,
-		     pci_hose_write_config_word_via_dword,
-		     gt_write_config_dword);
-
-	pci1_hose.region_count = 2;
-
-	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
-
-	pci_register_hose (&pci1_hose);
-
-	pciArbiterEnable (PCI_HOST1);
-	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-#ifdef CONFIG_PCI_PNP
-	pciauto_config_init(&pci1_hose);
-	pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
-#endif
-	pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
-
-	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
-}
-#endif /* of CONFIG_PCI */
diff --git a/board/prodrive/p3mx/ppc_error_no.h b/board/prodrive/p3mx/ppc_error_no.h
deleted file mode 100644
index 53687c86bb..0000000000
--- a/board/prodrive/p3mx/ppc_error_no.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus
- */
-#ifndef _MV_PPC_ERRNO_H
-#define _MV_PPC_ERRNO_H
-
-#define	EPERM		 1	/* Operation not permitted */
-#define	ENOENT		 2	/* No such file or directory */
-#define	ESRCH		 3	/* No such process */
-#define	EINTR		 4	/* Interrupted system call */
-#define	EIO		 5	/* I/O error */
-#define	ENXIO		 6	/* No such device or address */
-#define	E2BIG		 7	/* Arg list too long */
-#define	ENOEXEC		 8	/* Exec format error */
-#define	EBADF		 9	/* Bad file number */
-#define	ECHILD		10	/* No child processes */
-#define	EAGAIN		11	/* Try again */
-#define	ENOMEM		12	/* Out of memory */
-#define	EACCES		13	/* Permission denied */
-#define	EFAULT		14	/* Bad address */
-#define	ENOTBLK		15	/* Block device required */
-#define	EBUSY		16	/* Device or resource busy */
-#define	EEXIST		17	/* File exists */
-#define	EXDEV		18	/* Cross-device link */
-#define	ENODEV		19	/* No such device */
-#define	ENOTDIR		20	/* Not a directory */
-#define	EISDIR		21	/* Is a directory */
-#define	EINVAL		22	/* Invalid argument */
-#define	ENFILE		23	/* File table overflow */
-#define	EMFILE		24	/* Too many open files */
-#define	ENOTTY		25	/* Not a typewriter */
-#define	ETXTBSY		26	/* Text file busy */
-#define	EFBIG		27	/* File too large */
-#define	ENOSPC		28	/* No space left on device */
-#define	ESPIPE		29	/* Illegal seek */
-#define	EROFS		30	/* Read-only file system */
-#define	EMLINK		31	/* Too many links */
-#define	EPIPE		32	/* Broken pipe */
-#define	EDOM		33	/* Math argument out of domain of func */
-#define	ERANGE		34	/* Math result not representable */
-#define	EDEADLK		35	/* Resource deadlock would occur */
-#define	ENAMETOOLONG	36	/* File name too long */
-#define	ENOLCK		37	/* No record locks available */
-#define	ENOSYS		38	/* Function not implemented */
-#define	ENOTEMPTY	39	/* Directory not empty */
-#define	ELOOP		40	/* Too many symbolic links encountered */
-#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
-#define	ENOMSG		42	/* No message of desired type */
-#define	EIDRM		43	/* Identifier removed */
-#define	ECHRNG		44	/* Channel number out of range */
-#define	EL2NSYNC	45	/* Level 2 not synchronized */
-#define	EL3HLT		46	/* Level 3 halted */
-#define	EL3RST		47	/* Level 3 reset */
-#define	ELNRNG		48	/* Link number out of range */
-#define	EUNATCH		49	/* Protocol driver not attached */
-#define	ENOCSI		50	/* No CSI structure available */
-#define	EL2HLT		51	/* Level 2 halted */
-#define	EBADE		52	/* Invalid exchange */
-#define	EBADR		53	/* Invalid request descriptor */
-#define	EXFULL		54	/* Exchange full */
-#define	ENOANO		55	/* No anode */
-#define	EBADRQC		56	/* Invalid request code */
-#define	EBADSLT		57	/* Invalid slot */
-#define	EDEADLOCK	58	/* File locking deadlock error */
-#define	EBFONT		59	/* Bad font file format */
-#define	ENOSTR		60	/* Device not a stream */
-#define	ENODATA		61	/* No data available */
-#define	ETIME		62	/* Timer expired */
-#define	ENOSR		63	/* Out of streams resources */
-#define	ENONET		64	/* Machine is not on the network */
-#define	ENOPKG		65	/* Package not installed */
-#define	EREMOTE		66	/* Object is remote */
-#define	ENOLINK		67	/* Link has been severed */
-#define	EADV		68	/* Advertise error */
-#define	ESRMNT		69	/* Srmount error */
-#define	ECOMM		70	/* Communication error on send */
-#define	EPROTO		71	/* Protocol error */
-#define	EMULTIHOP	72	/* Multihop attempted */
-#define	EDOTDOT		73	/* RFS specific error */
-#define	EBADMSG		74	/* Not a data message */
-#define	EOVERFLOW	75	/* Value too large for defined data type */
-#define	ENOTUNIQ	76	/* Name not unique on network */
-#define	EBADFD		77	/* File descriptor in bad state */
-#define	EREMCHG		78	/* Remote address changed */
-#define	ELIBACC		79	/* Can not access a needed shared library */
-#define	ELIBBAD		80	/* Accessing a corrupted shared library */
-#define	ELIBSCN		81	/* .lib section in a.out corrupted */
-#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
-#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
-#define	EILSEQ		84	/* Illegal byte sequence */
-#define	ERESTART	85	/* Interrupted system call should be restarted */
-#define	ESTRPIPE	86	/* Streams pipe error */
-#define	EUSERS		87	/* Too many users */
-#define	ENOTSOCK	88	/* Socket operation on non-socket */
-#define	EDESTADDRREQ	89	/* Destination address required */
-#define	EMSGSIZE	90	/* Message too long */
-#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
-#define	ENOPROTOOPT	92	/* Protocol not available */
-#define	EPROTONOSUPPORT	93	/* Protocol not supported */
-#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
-#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
-#define	EPFNOSUPPORT	96	/* Protocol family not supported */
-#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
-#define	EADDRINUSE	98	/* Address already in use */
-#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
-#define	ENETDOWN	100	/* Network is down */
-#define	ENETUNREACH	101	/* Network is unreachable */
-#define	ENETRESET	102	/* Network dropped connection because of reset */
-#define	ECONNABORTED	103	/* Software caused connection abort */
-#define	ECONNRESET	104	/* Connection reset by peer */
-#define	ENOBUFS		105	/* No buffer space available */
-#define	EISCONN		106	/* Transport endpoint is already connected */
-#define	ENOTCONN	107	/* Transport endpoint is not connected */
-#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
-#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
-#define	ETIMEDOUT	110	/* Connection timed out */
-#define	ECONNREFUSED	111	/* Connection refused */
-#define	EHOSTDOWN	112	/* Host is down */
-#define	EHOSTUNREACH	113	/* No route to host */
-#define	EALREADY	114	/* Operation already in progress */
-#define	EINPROGRESS	115	/* Operation now in progress */
-#define	ESTALE		116	/* Stale NFS file handle */
-#define	EUCLEAN		117	/* Structure needs cleaning */
-#define	ENOTNAM		118	/* Not a XENIX named type file */
-#define	ENAVAIL		119	/* No XENIX semaphores available */
-#define	EISNAM		120	/* Is a named type file */
-#define	EREMOTEIO	121	/* Remote I/O error */
-#define	EDQUOT		122	/* Quota exceeded */
-
-#define	ENOMEDIUM	123	/* No medium found */
-#define	EMEDIUMTYPE	124	/* Wrong medium type */
-
-/* Should never be seen by user programs */
-#define ERESTARTSYS	512
-#define ERESTARTNOINTR	513
-#define ERESTARTNOHAND	514	/* restart if no handler.. */
-#define ENOIOCTLCMD	515	/* No ioctl command */
-
-#define _LAST_ERRNO	515
-
-#endif
diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c
deleted file mode 100644
index 176252efee..0000000000
--- a/board/prodrive/p3mx/sdram_init.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64460 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
- *************************************************************************/
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../../Marvell/include/memory.h"
-#include "../../Marvell/include/pci.h"
-#include "../../Marvell/include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../../Marvell/common/i2c.h"
-#include "64460.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	DEBUG
-#define MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-int set_dfcdlInit (void);	/* setup delay line of Mv64460 */
-int mvDmaIsChannelActive (int);
-int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
-int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
-
-#define D_CACHE_FLUSH_LINE(addr, offset)				\
-	{								\
-		__asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
-	}
-
-int memory_map_bank (unsigned int bankNo,
-		     unsigned int bankBase, unsigned int bankLength)
-{
-#ifdef MAP_PCI
-	PCI_HOST host;
-#endif
-
-#ifdef DEBUG
-	if (bankLength > 0) {
-		printf ("mapping bank %d at %08x - %08x\n",
-			bankNo, bankBase, bankBase + bankLength - 1);
-	} else {
-		printf ("unmapping bank %d\n", bankNo);
-	}
-#endif
-
-	memoryMapBank (bankNo, bankBase, bankLength);
-
-#ifdef MAP_PCI
-	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
-		const int features =
-			PREFETCH_ENABLE |
-			DELAYED_READ_ENABLE |
-			AGGRESSIVE_PREFETCH |
-			READ_LINE_AGGRESSIVE_PREFETCH |
-			READ_MULTI_AGGRESSIVE_PREFETCH |
-			MAX_BURST_4 | PCI_NO_SWAP;
-
-		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
-		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
-				       bankLength);
-
-		pciSetRegionFeatures (host, bankNo, features, bankBase,
-				      bankLength);
-	}
-#endif
-
-	return 0;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int dram_size (long int *base, long int maxsize)
-{
-	volatile long int *addr, *b = base;
-	long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20)	/* start test at 1M */
-	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
-	     cnt <<= 1) {
-		addr = base + cnt;	/* pointer arith! */
-
-		save1 = *addr;	/* save contents of addr */
-		save2 = *b;	/* save contents of base */
-
-		*addr = cnt;	/* write cnt to addr */
-		*b = 0;		/* put null at base */
-
-		/* check at base address */
-		if ((*b) != 0) {
-			*addr = save1;	/* restore *addr */
-			*b = save2;	/* restore *b */
-			return (0);
-		}
-		val = *addr;	/* read *addr */
-		val = *addr;	/* read *addr */
-
-		*addr = save1;
-		*b = save2;
-
-		if (val != cnt) {
-			DP (printf
-			    ("Found %08x  at Address %08x (failure)\n",
-			     (unsigned int) val, (unsigned int) addr));
-			/* fix boundary condition.. STARTVAL means zero */
-			if (cnt == STARTVAL / sizeof (long))
-				cnt = 0;
-			return (cnt * sizeof (long));
-		}
-	}
-
-	return maxsize;
-}
-
-#define SDRAM_NORMAL			0x0
-#define SDRAM_PRECHARGE_ALL		0x1
-#define SDRAM_REFRESH_ALL		0x2
-#define SDRAM_MODE_REG_SETUP		0x3
-#define SDRAM_XTEN_MODE_REG_SETUP	0x4
-#define SDRAM_NOP			0x5
-#define SDRAM_SELF_REFRESH		0x7
-
-long int initdram (int board_type)
-{
-	int tmp;
-	int start;
-	ulong size;
-	ulong memSpaceAttr;
-	ulong dest;
-
-	/* first disable all banks */
-	memory_map_bank(0, 0, 0);
-	memory_map_bank(1, 0, 0);
-	memory_map_bank(2, 0, 0);
-	memory_map_bank(3, 0, 0);
-
-	/* calibrate delay lines */
-	set_dfcdlInit();
-
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP);		/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* SDRAM controller configuration */
-#ifdef CONFIG_MV64460_ECC
-	GT_REG_WRITE(MV64460_SDRAM_CONFIG,		0x58201400);	/* 0x1400 */
-#else
-	GT_REG_WRITE(MV64460_SDRAM_CONFIG,		0x58200400);	/* 0x1400 */
-#endif
-	GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW,	0xC3000540);	/* 0x1404  */
-	GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH,	0x0300F777);	/* 0x1424 */
-	GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW,	0x01712220);	/* 0x1408 */
-	GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D);	/* 0x140C */
-	GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL,	0x00000012);	/* 0x1410 */
-	GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL,	0x00000001);	/* 0x1414 */
-
-	/* SDRAM drive strength */
-	GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */
-	GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */
-	GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000);	    /* 0x14C4 */
-	GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008);	    /* 0x14C4 */
-
-	/* setup SDRAM device registers */
-
-	/* precharge all */
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL);	/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* enable DLL */
-	GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000);			/* 0x1420 */
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP);	/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* reset DLL */
-	GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132);	/* 0x141C */
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP);	/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* precharge all */
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL);	/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* wait for 2 auto refresh commands */
-	udelay(20);
-
-	/* un-reset DLL */
-	GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032);	/* 0x141C */
-	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP);	/* 0x1418 */
-	do {
-		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
-	} while(tmp != 0x0);
-
-	/* wait 200 cycles */
-	udelay(2);  /* FIXME  make this dynamic for the system clock */
-
-	/* SDRAM init done */
-	memory_map_bank(0, CFG_SDRAM_BASE,  (256 << 20));
-#ifdef CFG_SDRAM1_BASE
-	memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20));
-#endif
-
-	/* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
-	 */
-	tmp = GTREGREAD(MV64460_D_UNIT_MMASK);				/* 0x14B0 */
-	GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2);
-
-	start = (0 << 20);
-#ifdef CONFIG_P3M750
-	size = (512 << 20);
-#elif defined (CONFIG_P3M7448)
-	size = (128 << 20);
-#endif
-
-#ifdef CONFIG_MV64460_ECC
-	memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8;
-	mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size);
-	for (dest = start; dest < start + size; dest += _8M) {
-		mvDmaTransfer (0, start, dest, _8M,
-			       BIT8 /*DMA_DTL_128BYTES */  |
-			       BIT3 /*DMA_HOLD_SOURCE_ADDR */ |
-			       BIT11 /*DMA_BLOCK_TRANSFER_MODE */ );
-		while (mvDmaIsChannelActive (0));
-	}
-#endif
-
-	return (size);
-}
-
-void board_add_ram_info(int use_default)
-{
-	u32 val;
-
-	puts(" (CL=");
-	switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) {
-	case 0x2:
-		puts("2");
-		break;
-	case 0x3:
-		puts("3");
-		break;
-	case 0x5:
-		puts("1.5");
-		break;
-	case 0x6:
-		puts("2.5");
-		break;
-	}
-
-	val = GTREGREAD(MV64460_SDRAM_CONFIG);
-
-	puts(", ECC ");
-	if (val & 0x00001000)
-		puts("enabled)");
-	else
-		puts("not enabled)");
-}
-
-/*
- * mvDmaIsChannelActive - Check if IDMA channel is active
- *
- * channel	= IDMA channel number from 0 to 7
- */
-int mvDmaIsChannelActive (int channel)
-{
-	ulong data;
-
-	data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel);
-	if (data & BIT14)	/* activity status */
-		return 1;
-
-	return 0;
-}
-
-/*
- * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
- *			 map.
- *
- * memSpace	= IDMA memory window number from 0 to 7
- * trg_if	= Target interface:
- *		  0x0 DRAM
- *		  0x1 Device Bus
- *		  0x2 Integrated SDRAM (or CPU bus 60x only)
- *		  0x3 PCI0
- *		  0x4 PCI1
- * attr		= IDMA attributes (see MV datasheet)
- * base_addr	= Sets up memory window for transfers
- *
- */
-int mvDmaSetMemorySpace (ulong memSpace,
-			 ulong trg_if,
-			 ulong attr, ulong base_addr, ulong size)
-{
-	ulong temp;
-
-	/* The base address must be aligned to the size.  */
-	if (base_addr % size != 0)
-		return 0;
-
-	if (size >= 0x10000) {	 /* 64K */
-		size &= 0xffff0000;
-		base_addr = (base_addr & 0xffff0000);
-		/* Set the new attributes */
-		GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
-			      (base_addr | trg_if | attr));
-		GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
-		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
-			      (temp & ~(BIT0 << memSpace)));
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4
- *		   DMA channels.
- *
- * channel	= IDMA channel number from 0 to 3
- * destAddr	= Destination address
- * sourceAddr	= Source address
- * size		= Size in bytes
- * command	= See MV datasheet
- *
- */
-int mvDmaTransfer (int channel, ulong sourceAddr,
-		   ulong destAddr, ulong size, ulong command)
-{
-	ulong engOffReg = 0;	/* Engine Offset Register */
-
-	if (size > 0xffff)
-		command = command | BIT31;	/* DMA_16M_DESCRIPTOR_MODE */
-	command = command | ((command >> 6) & 0x7);
-	engOffReg = channel * 4;
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size);
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr);
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr);
-	command = command |
-		BIT12	|			/* DMA_CHANNEL_ENABLE */
-		BIT9;				/* DMA_NON_CHAIN_MODE */
-	/* Activate DMA channel By writting to mvDmaControlRegister */
-	GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
-	return 1;
-}
-
-/****************************************************************************************
- *			       SDRAM INIT						*
- *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
- *		 This procedure fits only the Atlantis					*
- *											*
- ***************************************************************************************/
-
-/****************************************************************************************
- *			       DFCDL initialize MV643xx Design Considerations		*
- *											*
- ***************************************************************************************/
-int set_dfcdlInit (void)
-{
-	int i;
-
-	/* Values from MV64460 User Manual */
-	unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083,
-				     0x000000c4, 0x00000105, 0x00000146, 0x00000187,
-				     0x000001c8, 0x00000209, 0x0000024a, 0x0000028b,
-				     0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f,
-				     0x000003d0, 0x00000411, 0x00000452, 0x00000493,
-				     0x000004d4, 0x00000515, 0x00000556, 0x00000597,
-				     0x000005d8, 0x00000619, 0x0000065a, 0x0000069b,
-				     0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f,
-				     0x000007e0, 0x00000821, 0x00000862, 0x000008a3,
-				     0x000008e4, 0x00000925, 0x00000966, 0x000009a7,
-				     0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab,
-				     0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf,
-				     0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3,
-				     0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7,
-				     0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb,
-				     0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf };
-
-	for (i = 0; i < 64; i++)
-		GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]);
-	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
-
-	return (0);
-}
diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c
deleted file mode 100644
index ba32ac12ac..0000000000
--- a/board/prodrive/p3mx/serial.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * modified for marvell db64360 eval board by
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * modified for cpci750 board by
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * serial.c - serial support for esd cpci750 board
- */
-
-/* supports the MPSC */
-
-#include <common.h>
-#include <command.h>
-#include "../../Marvell/include/memory.h"
-#include "serial.h"
-
-#include "mpsc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int serial_init (void)
-{
-	mpsc_init (gd->baudrate);
-
-	return (0);
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-		mpsc_putchar ('\r');
-
-	mpsc_putchar (c);
-}
-
-int serial_getc (void)
-{
-	return mpsc_getchar ();
-}
-
-int serial_tstc (void)
-{
-	return mpsc_test_char ();
-}
-
-void serial_setbrg (void)
-{
-	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
-}
-
-
-void serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void kgdb_serial_init (void)
-{
-}
-
-void putDebugChar (int c)
-{
-	serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
-	serial_puts (str);
-}
-
-int getDebugChar (void)
-{
-	return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
-	return;
-}
-#endif /* CFG_CMD_KGDB */
diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h
deleted file mode 100644
index 27eee65c45..0000000000
--- a/board/prodrive/p3mx/serial.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * modified for marvell db64360 eval board by
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* serial.h - mostly useful for DUART serial_init in serial.c */
-
-#ifndef __SERIAL_H__
-#define __SERIAL_H__
-
-
-#endif /* __SERIAL_H__ */
diff --git a/board/prodrive/p3mx/u-boot.lds b/board/prodrive/p3mx/u-boot.lds
deleted file mode 100644
index d89eb6cff2..0000000000
--- a/board/prodrive/p3mx/u-boot.lds
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/74xx_7xx/start.o	(.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/*    . = env_offset; */
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/prodrive/p3p440/Makefile b/board/prodrive/p3p440/Makefile
deleted file mode 100644
index 261e5d49cc..0000000000
--- a/board/prodrive/p3p440/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/prodrive/p3p440/config.mk b/board/prodrive/p3p440/config.mk
deleted file mode 100644
index e5722dd36a..0000000000
--- a/board/prodrive/p3p440/config.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFFC0000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/prodrive/p3p440/init.S b/board/prodrive/p3p440/init.S
deleted file mode 100644
index ee6b7066e9..0000000000
--- a/board/prodrive/p3p440/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
-    tlbtab_end
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
deleted file mode 100644
index 2f28e9d87a..0000000000
--- a/board/prodrive/p3p440/p3p440.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-#include "p3p440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void set_led(int color)
-{
-	switch (color) {
-	case LED_OFF:
-		out32(GPIO0_OR,  in32(GPIO0_OR) & ~CFG_LED_GREEN & ~CFG_LED_RED);
-		break;
-
-	case LED_GREEN:
-		out32(GPIO0_OR,  (in32(GPIO0_OR) | CFG_LED_GREEN) & ~CFG_LED_RED);
-		break;
-
-	case LED_RED:
-		out32(GPIO0_OR,  (in32(GPIO0_OR) | CFG_LED_RED) & ~CFG_LED_GREEN);
-		break;
-
-	case LED_ORANGE:
-		out32(GPIO0_OR,  in32(GPIO0_OR) | CFG_LED_GREEN | CFG_LED_RED);
-		break;
-	}
-}
-
-static int is_monarch(void)
-{
-	out32(GPIO0_OR,  in32(GPIO0_OR) & ~CFG_GPIO_RDY);
-	udelay(1000);
-
-	if (in32(GPIO0_IR) & CFG_MONARCH_IO)
-		return 0;
-	else
-		return 1;
-}
-
-static void wait_for_pci_ready(void)
-{
-	/*
-	 * Configure EREADY_IO as input
-	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_EREADY_IO);
-	udelay(1000);
-
-	for (;;) {
-		if (in32(GPIO0_IR) & CFG_EREADY_IO)
-			return;
-	}
-
-}
-
-int board_early_init_f(void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
-
-	/*--------------------------------------------------------------------
-	 * Setup pin multiplexing (GPIO/IRQ...)
-	 *-------------------------------------------------------------------*/
-	mtdcr(cpc0_gpio, 0x03F01F80);
-
-	out32(GPIO0_ODR, 0x00000000);	/* no open drain pins      */
-	out32(GPIO0_TCR, CFG_GPIO_RDY | CFG_EREADY_IO | CFG_LED_RED | CFG_LED_GREEN);
-	out32(GPIO0_OR,  CFG_GPIO_RDY);
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000001);	/* UIC1 crit is critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: P3P440");
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	if (is_monarch()) {
-		puts(", Monarch");
-	} else {
-		puts(", None-Monarch");
-	}
-
-	putc('\n');
-
-	return (0);
-}
-
-int misc_init_r (void)
-{
-	/*
-	 * Adjust flash start and offset to detected values
-	 */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Check if only one FLASH bank is available
-	 */
-	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
-		mtebc(pb1cr, 0);			/* disable cs */
-		mtebc(pb1ap, 0);
-		mtebc(pb2cr, 0);			/* disable cs */
-		mtebc(pb2ap, 0);
-		mtebc(pb3cr, 0);			/* disable cs */
-		mtebc(pb3ap, 0);
-	}
-
-	return 0;
-}
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long strap;
-
-	/*--------------------------------------------------------------------------+
-	 *	The P3P440 board is always configured as the host & requires the
-	 *	PCI arbiter to be disabled because it's an PMC module.
-	 *--------------------------------------------------------------------------*/
-	strap = mfdcr(cpc0_strp1);
-	if (strap & 0x00100000) {
-		printf("PCI: CPC0_STRP1[PAE] set.\n");
-		return 0;
-	}
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Disable everything
-	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0SA, 0);	/* disable */
-	out32r(PCIX0_PIM1SA, 0);	/* disable */
-	out32r(PCIX0_PIM2SA, 0);	/* disable */
-	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
-
-	/*--------------------------------------------------------------------------+
-	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
-	 * options to not support sizes such as 128/256 MB.
-	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
-	out32r(PCIX0_PIM0LAH, 0);
-	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
-
-	out32r(PCIX0_BAR0, 0);
-
-	/*--------------------------------------------------------------------------+
-	 * Program the board's subsystem id/vendor id
-	 *--------------------------------------------------------------------------*/
-	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
-
-	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	if (is_monarch()) {
-		wait_for_pci_ready();
-		return 1;		/* return 1 for host controller */
-	} else {
-		return 0;		/* return 0 for adapter controller */
-	}
-}
-#endif				/* defined(CONFIG_PCI) */
diff --git a/board/prodrive/p3p440/p3p440.h b/board/prodrive/p3p440/p3p440.h
deleted file mode 100644
index e4e87d1f59..0000000000
--- a/board/prodrive/p3p440/p3p440.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3P440_H__
-#define __P3P440_H__
-
-#define CFG_GPIO_RDY	(0x80000000 >> 11)
-#define CFG_MONARCH_IO	(0x80000000 >> 18)
-#define CFG_EREADY_IO	(0x80000000 >> 20)
-#define CFG_LED_GREEN	(0x80000000 >> 21)
-#define CFG_LED_RED	(0x80000000 >> 22)
-
-#define LED_OFF		1
-#define LED_GREEN	2
-#define LED_RED		3
-#define LED_ORANGE	4
-
-long int fixed_sdram(void);
-
-#endif /* __P3P440_H__ */
diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds
deleted file mode 100644
index 92bb740e45..0000000000
--- a/board/prodrive/p3p440/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/prodrive/p3p440/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/psyent/common/AMDLV065D.c b/board/psyent/common/AMDLV065D.c
deleted file mode 100644
index 8a7b14ee2f..0000000000
--- a/board/psyent/common/AMDLV065D.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#if defined(CONFIG_NIOS)
-#include <nios.h>
-#else
-#include <asm/io.h>
-#endif
-
-#define SECTSZ		(64 * 1024)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-/*----------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
-	int i;
-	unsigned long addr;
-	flash_info_t *fli = &flash_info[0];
-
-	fli->size = CFG_FLASH_SIZE;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
-	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
-	addr = CFG_FLASH_BASE;
-	for (i = 0; i < fli->sector_count; ++i) {
-		fli->start[i] = addr;
-		addr += SECTSZ;
-		fli->protect[i] = 1;
-	}
-
-	return (CFG_FLASH_SIZE);
-}
-/*--------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
-	int i, k;
-	int erased;
-	unsigned long *addr;
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-
-		/* Check if whole sector is erased */
-		erased = 1;
-		addr = (unsigned long *) info->start[i];
-		for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) {
-			if ( readl(addr++) != (unsigned long)-1) {
-				erased = 0;
-				break;
-			}
-		}
-
-		/* Print the info */
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ",
-			info->protect[i] ? "RO " : "   ");
-	}
-	printf ("\n");
-}
-
-/*-------------------------------------------------------------------*/
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	unsigned char *addr = (unsigned char *) info->start[0];
-	unsigned char *addr2;
-	int prot, sect;
-	ulong start;
-
-	/* Some sanity checking */
-	if ((s_first < 0) || (s_first > s_last)) {
-		printf ("- no sectors to erase\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* It's ok to erase multiple sectors provided we don't delay more
-	 * than 50 usec between cmds ... at which point the erase time-out
-	 * occurs. So don't go and put printf() calls in the loop ... it
-	 * won't be very helpful ;-)
-	 */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (unsigned char *) info->start[sect];
-			writeb (addr, 0xaa);
-			writeb (addr,  0x55);
-			writeb (addr,  0x80);
-			writeb (addr,  0xaa);
-			writeb (addr,  0x55);
-			writeb (addr2, 0x30);
-			/* Now just wait for 0xff & provide some user
-			 * feedback while we wait.
-			 */
-			start = get_timer (0);
-			while ( readb (addr2) != 0xff) {
-				udelay (1000 * 1000);
-				putc ('.');
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
-					printf ("timeout\n");
-					return 1;
-				}
-			}
-		}
-	}
-	printf ("\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-
-	vu_char *cmd = (vu_char *) info->start[0];
-	vu_char *dst = (vu_char *) addr;
-	unsigned char b;
-	ulong start;
-
-	while (cnt) {
-		/* Check for sufficient erase */
-		b = *src;
-		if ((readb (dst) & b) != b) {
-			printf ("%02x : %02x\n", readb (dst), b);
-			return (2);
-		}
-
-		writeb (cmd,  0xaa);
-		writeb (cmd,  0x55);
-		writeb (cmd,  0xa0);
-		writeb (dst, b);
-
-		/* Verify write */
-		start = get_timer (0);
-		while (readb (dst) != b) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-				return 1;
-			}
-		}
-		dst++;
-		src++;
-		cnt--;
-	}
-
-	return (0);
-}
diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile
deleted file mode 100644
index 3639cbaf58..0000000000
--- a/board/psyent/pci5441/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o
-
-COBJS	:= $(BOARD).o $(COMOBJS)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/psyent/pci5441/config.mk b/board/psyent/pci5441/config.mk
deleted file mode 100644
index d72bceed2d..0000000000
--- a/board/psyent/pci5441/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018e0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/psyent/pci5441/pci5441.c b/board/psyent/pci5441/pci5441.c
deleted file mode 100644
index ea80dd1395..0000000000
--- a/board/psyent/pci5441/pci5441.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("BOARD : Psyent PCI-5441\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	return (0);
-}
diff --git a/board/psyent/pci5441/u-boot.lds b/board/psyent/pci5441/u-boot.lds
deleted file mode 100644
index 8f9cd8fa59..0000000000
--- a/board/psyent/pci5441/u-boot.lds
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-littlenios2")
-OUTPUT_ARCH(nios2)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  cpu/nios2/start.o (.text)
-	  *(.text)
-	  *(.text.*)
-	  *(.gnu.linkonce.t*)
-	  *(.rodata)
-	  *(.rodata.*)
-	  *(.gnu.linkonce.r*)
-	}
-	. = ALIGN (4);
-	_etext = .;
-	PROVIDE (etext = .);
-
-	/* CMD TABLE - sandwich this in between text and data so
-	 * the initialization code relocates the command table as
-	 * well -- admittedly, this is just pure laziness ;-)
-	 */
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	/* INIT DATA sections - "Small" data (see the gcc -G option)
-	 * is always gp-relative. Here we make all init data sections
-	 * adjacent to simplify the startup code -- and provide
-	 * the global pointer for gp-relative access.
-	 */
-	_data = .;
-	.data :
-	{
-	  *(.data)
-	  *(.data.*)
-	  *(.gnu.linkonce.d*)
-	}
-
-	. = ALIGN(16);
-	_gp = .;			/* Global pointer addr */
-	PROVIDE (gp = .);
-
-	.sdata :
-	{
-	  *(.sdata)
-	  *(.sdata.*)
-	  *(.gnu.linkonce.s.*)
-	}
-	. = ALIGN(4);
-
-	_edata = .;
-	PROVIDE (edata = .);
-
-	/* UNINIT DATA - Small uninitialized data is first so it's
-	 * adjacent to sdata and can be referenced via gp. The normal
-	 * bss follows. We keep it adjacent to simplify init code.
-	 */
-	__bss_start = .;
-	.sbss :
-	{
-	  *(.sbss)
-	  *(.sbss.*)
-	  *(.gnu.linkonce.sb.*)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	.bss :
-	{
-	  *(.bss)
-	  *(.bss.*)
-	  *(.dynbss)
-	  *(COMMON)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	_end = .;
-	PROVIDE (end = .);
-
-	/* DEBUG -- symbol table, string table, etc. etc.
-	 */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug		0 : { *(.debug) }
-	.line		0 : { *(.line) }
-	.debug_srcinfo	0 : { *(.debug_srcinfo) }
-	.debug_sfnames	0 : { *(.debug_sfnames) }
-	.debug_aranges	0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_info	0 : { *(.debug_info) }
-	.debug_abbrev	0 : { *(.debug_abbrev) }
-	.debug_line	0 : { *(.debug_line) }
-	.debug_frame	0 : { *(.debug_frame) }
-	.debug_str	0 : { *(.debug_str) }
-	.debug_loc	0 : { *(.debug_loc) }
-	.debug_macinfo	0 : { *(.debug_macinfo) }
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames	 0 : { *(.debug_varnames) }
-}
diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile
deleted file mode 100644
index 2568a68ede..0000000000
--- a/board/psyent/pk1c20/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o
-
-COBJS	:= $(BOARD).o led.o $(COMOBJS)
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/psyent/pk1c20/config.mk b/board/psyent/pk1c20/config.mk
deleted file mode 100644
index d65780dd9b..0000000000
--- a/board/psyent/pk1c20/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/psyent/pk1c20/led.c b/board/psyent/pk1c20/led.c
deleted file mode 100644
index c75fe8c573..0000000000
--- a/board/psyent/pk1c20/led.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <nios2-io.h>
-#include <status_led.h>
-
-/* The LED port is configured as output only, so we
- * must track the state manually.
- */
-static led_id_t val = 0;
-
-void __led_init (led_id_t mask, int state)
-{
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
-
-	if (state == STATUS_LED_ON)
-		val &= ~mask;
-	else
-		val |= mask;
-	writel (&pio->data, val);
-}
-
-void __led_set (led_id_t mask, int state)
-{
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
-
-	if (state == STATUS_LED_ON)
-		val &= ~mask;
-	else
-		val |= mask;
-	writel (&pio->data, val);
-}
-
-void __led_toggle (led_id_t mask)
-{
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
-
-	val ^= mask;
-	writel (&pio->data, val);
-}
diff --git a/board/psyent/pk1c20/pk1c20.c b/board/psyent/pk1c20/pk1c20.c
deleted file mode 100644
index 1924ae3d17..0000000000
--- a/board/psyent/pk1c20/pk1c20.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("BOARD : Psyent PK-1C20\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-	return (0);
-}
diff --git a/board/psyent/pk1c20/u-boot.lds b/board/psyent/pk1c20/u-boot.lds
deleted file mode 100644
index 8f9cd8fa59..0000000000
--- a/board/psyent/pk1c20/u-boot.lds
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-littlenios2")
-OUTPUT_ARCH(nios2)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  cpu/nios2/start.o (.text)
-	  *(.text)
-	  *(.text.*)
-	  *(.gnu.linkonce.t*)
-	  *(.rodata)
-	  *(.rodata.*)
-	  *(.gnu.linkonce.r*)
-	}
-	. = ALIGN (4);
-	_etext = .;
-	PROVIDE (etext = .);
-
-	/* CMD TABLE - sandwich this in between text and data so
-	 * the initialization code relocates the command table as
-	 * well -- admittedly, this is just pure laziness ;-)
-	 */
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	/* INIT DATA sections - "Small" data (see the gcc -G option)
-	 * is always gp-relative. Here we make all init data sections
-	 * adjacent to simplify the startup code -- and provide
-	 * the global pointer for gp-relative access.
-	 */
-	_data = .;
-	.data :
-	{
-	  *(.data)
-	  *(.data.*)
-	  *(.gnu.linkonce.d*)
-	}
-
-	. = ALIGN(16);
-	_gp = .;			/* Global pointer addr */
-	PROVIDE (gp = .);
-
-	.sdata :
-	{
-	  *(.sdata)
-	  *(.sdata.*)
-	  *(.gnu.linkonce.s.*)
-	}
-	. = ALIGN(4);
-
-	_edata = .;
-	PROVIDE (edata = .);
-
-	/* UNINIT DATA - Small uninitialized data is first so it's
-	 * adjacent to sdata and can be referenced via gp. The normal
-	 * bss follows. We keep it adjacent to simplify init code.
-	 */
-	__bss_start = .;
-	.sbss :
-	{
-	  *(.sbss)
-	  *(.sbss.*)
-	  *(.gnu.linkonce.sb.*)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	.bss :
-	{
-	  *(.bss)
-	  *(.bss.*)
-	  *(.dynbss)
-	  *(COMMON)
-	  *(.scommon)
-	}
-	. = ALIGN(4);
-	_end = .;
-	PROVIDE (end = .);
-
-	/* DEBUG -- symbol table, string table, etc. etc.
-	 */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug		0 : { *(.debug) }
-	.line		0 : { *(.line) }
-	.debug_srcinfo	0 : { *(.debug_srcinfo) }
-	.debug_sfnames	0 : { *(.debug_sfnames) }
-	.debug_aranges	0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_info	0 : { *(.debug_info) }
-	.debug_abbrev	0 : { *(.debug_abbrev) }
-	.debug_line	0 : { *(.debug_line) }
-	.debug_frame	0 : { *(.debug_frame) }
-	.debug_str	0 : { *(.debug_str) }
-	.debug_loc	0 : { *(.debug_loc) }
-	.debug_macinfo	0 : { *(.debug_macinfo) }
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames	 0 : { *(.debug_varnames) }
-}
diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile
deleted file mode 100644
index a957dd3961..0000000000
--- a/board/pxa255_idp/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= pxa_idp.o
-SOBJS	:= memsetup.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/pxa255_idp/README b/board/pxa255_idp/README
deleted file mode 100644
index 0cc2f2ae33..0000000000
--- a/board/pxa255_idp/README
+++ /dev/null
@@ -1,11 +0,0 @@
-Tested:
-
-- MMC
-- Ethernet
-- BL console (on serial port connector J5)
-- flash support
-
-Todo:
-
-- display support
-- PCMCIA support
diff --git a/board/pxa255_idp/config.mk b/board/pxa255_idp/config.mk
deleted file mode 100644
index d2a2040e68..0000000000
--- a/board/pxa255_idp/config.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-#TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3000000
-#TEXT_BASE = 0
diff --git a/board/pxa255_idp/idp_notes.txt b/board/pxa255_idp/idp_notes.txt
deleted file mode 100644
index 47467485fe..0000000000
--- a/board/pxa255_idp/idp_notes.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Notes on the Vibren PXA255 IDP.
-
-Chip select usage:
-
-CS0 - flash
-CS1 - alt flash (Mdoc or main flash)
-CS2 - high speed expansion bus
-CS3 - Media Q, low speed exp bus
-CS4 - low speed exp bus
-CS5 - low speed exp bus
-  - IDE: offset 0x03000000 (abs: 0x17000000)
-  - Eth: offset 0x03400000 (abs: 0x17400000)
-  - core voltage latch: offset 0x03800000 (abs: 0x17800000)
-  - CPLD: offset 0x03C00000 (abs: 0x17C00000)
-
-PCMCIA Power control
-
-MAX1602EE w/ code pulled high (Cirrus code)
-vx = 5v
-vy = 3v
-
-			Bit pattern
-			PWR 3,2,1,0
-vcc	     vpp	A1VCC  A0VCC   A1VPP   A0VPP
-=====================================================
-0	     0            0      0       0       0	0x0
-3 (vy)	     0            1      0       1       1	0xB
-3 (vy)	     3 (vy)       1      0       0       1	0x9
-3 (vy)	     12(12in)     1      0       1       0	0xA
-5 (vx)	     0            0      1       1       1	0x7
-5 (vx)	     5 (vx)       0      1       0       1	0x5
-5 (vx	     12(12in)     0      1       1       0	0x6
-
-Display power sequencing:
-
-- VDD applied
-- within 1sec, activate scanning signals
-- wait at least 50mS - scanning signals must be active before activating DISP
-
-Signal mapping:
-Schematic            LV8V31 signal name
-=========================================
-LCD_ENAVLCD		DISP
-LCD_PWR			Applies VDD to board
-
-Both of the above signals are controlled by the CPLD
diff --git a/board/pxa255_idp/memsetup.S b/board/pxa255_idp/memsetup.S
deleted file mode 100644
index 7f5a158ed0..0000000000
--- a/board/pxa255_idp/memsetup.S
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
-
-/* wait for coprocessor write complete */
-	.macro CPWAIT reg
-	mrc  p15,0,\reg,c2,c0,0
-	mov  \reg,\reg
-	sub  pc,pc,#4
-	.endm
-
-/*
- * 	Memory setup
- */
-.globl memsetup
-memsetup:
-
-	mov      r10, lr
-
-#ifdef DEBUG_BLINK_ENABLE
-	/* 3rd blink */
-	bl	blink
-#endif
-
-	/* Set up GPIO pins first ----------------------------------------- */
-	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
-	str		r1,   [r0]
-
-	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
-	str		r1,   [r0]
-
-#ifdef DEBUG_BLINK_ENABLE
-	/* 4th debug blink */
-	bl 	blink
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* Enable memory interface                                          */
-	/*                                                                  */
-	/* The sequence below is based on the recommended init steps        */
-	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
-	/* Chapter 10.                                                      */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
-	/*         clocks to settle. Only necessary after hard reset...     */
-	/*         FIXME: can be optimized later                            */
-	/* ---------------------------------------------------------------- */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-mem_init:
-
-	ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2a: Initialize Asynchronous static memory controller        */
-	/* ---------------------------------------------------------------- */
-
-	/* MSC registers: timing, bus width, mem type                       */
-
-	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
-	str     r2,   [r1, #MSC0_OFFSET]
-	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
-						/* that data latches        */
-	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
-	str     r2,  [r1, #MSC1_OFFSET]
-	ldr     r2,  [r1, #MSC1_OFFSET]
-
-	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
-	str     r2,  [r1, #MSC2_OFFSET]
-	ldr     r2,  [r1, #MSC2_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2b: Initialize Card Interface                               */
-	/* ---------------------------------------------------------------- */
-
-	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
-	str     r2,  [r1, #MECR_OFFSET]
-	ldr	r2,	[r1, #MECR_OFFSET]
-
-	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
-	str     r2,  [r1, #MCMEM0_OFFSET]
-	ldr	r2,	[r1, #MCMEM0_OFFSET]
-
-	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
-	str     r2,  [r1, #MCMEM1_OFFSET]
-	ldr	r2,	[r1, #MCMEM1_OFFSET]
-
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
-	str     r2,  [r1, #MCATT0_OFFSET]
-	ldr	r2,	[r1, #MCATT0_OFFSET]
-
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
-	str     r2,  [r1, #MCATT1_OFFSET]
-	ldr	r2,	[r1, #MCATT1_OFFSET]
-
-	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
-	str     r2,  [r1, #MCIO0_OFFSET]
-	ldr	r2,	[r1, #MCIO0_OFFSET]
-
-	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
-	str     r2,  [r1, #MCIO1_OFFSET]
-	ldr	r2,	[r1, #MCIO1_OFFSET]
-
-#ifdef DEBUG_BLINK_ENABLE
-	/* 5th blink */
-	bl 	blink
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
-	/* ---------------------------------------------------------------- */
-
-	/* Before accessing MDREFR we need a valid DRI field, so we set     */
-	/* this to power on defaults + DRI field.                           */
-
-	ldr     r3,     =CFG_MDREFR_VAL
-	ldr     r2,     =0xFFF
-	and     r3,     r3,  r2
-	ldr	r4,	=0x03ca4000
-	orr     r4,     r4,  r3
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr     r4,  [r1, #MDREFR_OFFSET]
-
-	/* Note: preserve the mdrefr value in r4                            */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
-	/* ---------------------------------------------------------------- */
-
-	/* Initialize SXCNFG register. Assert the enable bits               */
-
-	/* Write SXMRS to cause an MRS command to all enabled banks of      */
-	/* synchronous static memory. Note that SXLCR need not be written   */
-	/* at this time.                                                    */
-
-	/* FIXME: we use async mode for now                                 */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 4: Initialize SDRAM                                         */
-	/* ---------------------------------------------------------------- */
-
-	/* set MDREFR according to user define with exception of a few bits */
-
-	ldr     r4,     =CFG_MDREFR_VAL
-	orr	r4,	r4,	#(MDREFR_SLFRSH)
-	bic	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,  [r1, #MDREFR_OFFSET]
-
-	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
-
-	bic	r4,	r4,	#(MDREFR_SLFRSH)
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,  [r1, #MDREFR_OFFSET]
-
-	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired                */
-
-	ldr     r4,     =CFG_MDREFR_VAL
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
-
-	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
-	/*          configure but not enable each SDRAM partition pair.     */
-
-	ldr	r4,	=CFG_MDCNFG_VAL
-	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
-
-	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
-	ldr     r4,     [r1, #MDCNFG_OFFSET]
-
-	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
-	/*          100..200 µsec.                                          */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	    str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	    ldr r2, [r3]
-	    cmp r4, r2
-	    bgt 1b
-
-	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
-	/*          attempting non-burst read or write accesses to disabled */
-	/*          SDRAM, as commonly specified in the power up sequence   */
-	/*          documented in SDRAM data sheets. The address(es) used   */
-	/*          for this purpose must not be cacheable.                 */
-
-	ldr	r3,	=CFG_DRAM_BASE
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-
-	/* Step 4g: Write MDCNFG with enable bits asserted                  */
-	/*          (MDCNFG:DEx set to 1).                                  */
-
-	ldr     r3,  [r1, #MDCNFG_OFFSET]
-	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
-	str     r3,  [r1, #MDCNFG_OFFSET]
-
-	/* Step 4h: Write MDMRS.                                            */
-
-	ldr     r2,  =CFG_MDMRS_VAL
-	str     r2,  [r1, #MDMRS_OFFSET]
-
-	/* We are finished with Intel's memory controller initialisation    */
-
-#ifdef DEBUG_BLINK_ENABLE
-	/* 6th blink */
-	bl 	blink
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* Disable (mask) all interrupts at interrupt controller            */
-	/* ---------------------------------------------------------------- */
-
-initirqs:
-
-	mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
-	ldr     r2,  =ICLR
-	str     r1,  [r2]
-
-	ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
-	str     r1,  [r2]
-
-	/* ---------------------------------------------------------------- */
-	/* Clock initialisation                                             */
-	/* ---------------------------------------------------------------- */
-
-initclks:
-
-	/* Disable the peripheral clocks, and set the core clock frequency  */
-	/* (hard-coding at 398.12MHz for now).                              */
-
-	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
-	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
-
-#ifdef RTC
-	/* enable the 32Khz oscillator for RTC and PowerManager             */
-
-	ldr     r1,  =OSCC
-	mov     r2,  #OSCC_OON
-	str     r2,  [r1]
-
-	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
-	/* has settled.                                                     */
-60:
-	ldr     r2, [r1]
-	ands    r2, r2, #1
-	beq     60b
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/*                                                                  */
-	/* ---------------------------------------------------------------- */
-
-	/* Save SDRAM size */
-	ldr     r1, =DRAM_SIZE
-	 str	   r8, [r1]
-
-	/* Interrupt init: Mask all interrupts                              */
-	ldr	r0, =ICMR /* enable no sources */
-	mov r1, #0
-	str r1, [r0]
-
-	/* FIXME */
-
-#define NODEBUG
-#ifdef NODEBUG
-	/*Disable software and data breakpoints */
-	mov	r0,#0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/*Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
-	/* ---------------------------------------------------------------- */
-
-#ifdef DEBUG_BLINK_ENABLE
-	/* 7th blink */
-	bl 	blink
-#endif
-
-endmemsetup:
-
-	mov     pc, r10
-
-
-#ifdef DEBUG_BLINK_ENABLE
-
-/* debug LED code */
-
-/* delay about 200ms */
-delay:
-
-	/* reset OSCR to 0 */
-	ldr	r8, =OSCR
-	mov	r9, #0
-	str	r9, [r8]
-
-	/* make sure new value has stuck */
-1:
-	ldr	r8, =OSCR
-	ldr	r9, [r8]
-	mov	r8, #0x10000
-	cmp	r9, r8
-	bgt	1b
-
-	/* now, wait for delay to expire */
-1:
-	ldr	r8, =OSCR
-	ldr	r9, [r8]
-	mov	r8, #0xd4000
-	cmp	r8, r9
-	bgt	1b
-
-	mov	pc, lr
-
-/* blink code -- trashes r7, r8, r9 */
-
-.globl blink
-blink:
-
-	mov	r7, lr
-
-	/* set GPIO10 as outout */
-	ldr	r8,  =GPDR0
-	ldr	r9,  [r8]
-	orr	r9,  r9, #(1<<10)
-	str	r9,  [r8]
-
-	/* turn LED off */
-	mov	r9,  #(1<<10)
-	ldr	r8,  =GPCR0
-	str	r9, [r8]
-	bl	delay
-
-	/* turn LED on */
-	mov	r9,  #(1<<10)
-	ldr	r8,  =GPSR0
-	str	r9, [r8]
-	bl	delay
-
-	/* turn LED off */
-	mov	r9,  #(1<<10)
-	ldr	r8,  =GPCR0
-	str	r9, [r8]
-
-	mov	pc, r7
-
-#endif
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
deleted file mode 100644
index 5765c5532a..0000000000
--- a/board/pxa255_idp/pxa_idp.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2004
- * BEC Systems <http://bec-systems.com>
- * Cliff Brake <cliff.brake@gmail.com>
- * Support for Accelent/Vibren PXA255 IDP
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of Lubbock-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* turn on serial ports */
-	*(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C0002c) = 0x13;
-
-	/* set PWM for LCD */
-	/* a value that works is 60Hz, 77% duty cycle */
-	CKEN |= CKEN0_PWM0;
-	PWM_CTRL0 = 0x3f;
-	PWM_PERVAL0 = 0x3ff;
-	PWM_PWDUTY0 = 792;
-
-	/* clear reset to AC97 codec */
-	CKEN |= CKEN2_AC97;
-	GCR = GCR_COLD_RST;
-
-	/* enable LCD backlight */
-	/* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */
-
-	/* test display */
-	/* lcd_puts("This is a test\nTest #2\n"); */
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
-	return 0;
-}
-
-
-#ifdef DEBUG_BLINKC_ENABLE
-
-void delay_c(void)
-{
-	/* reset OSCR to 0 */
-	OSCR = 0;
-	while(OSCR > 0x10000)
-		;
-
-	while(OSCR < 0xd4000)
-		;
-}
-
-void blink_c(void)
-{
-	int led_bit = (1<<10);
-
-	GPDR0 = led_bit;
-	GPCR0 = led_bit;
-	delay_c();
-	GPSR0 = led_bit;
-	delay_c();
-	GPCR0 = led_bit;
-}
-
-int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	printf("IDPCMD started\n");
-	return 0;
-}
-
-U_BOOT_CMD(idpcmd, CFG_MAXARGS, 0, do_idpcmd,
-	   "idpcmd    - custom IDP command\n",
-	   "no args at this time\n"
-);
-
-#endif
diff --git a/board/pxa255_idp/pxa_reg_calcs.out b/board/pxa255_idp/pxa_reg_calcs.out
deleted file mode 100644
index bda9946c1c..0000000000
--- a/board/pxa255_idp/pxa_reg_calcs.out
+++ /dev/null
@@ -1,119 +0,0 @@
-gafr0_l: 0x80001005
-gafr0_u: 0xa5128012
-gafr1_l: 0x699a9558
-gafr1_u: 0xaaa5aa6a
-gafr2_l: 0xaaaaaaaa
-gafr2_u: 0x2
-gpcr0: 0x1800400
-gpcr1: 0x0
-gpcr2: 0x0
-gpdr0: 0xc1818440
-gpdr1: 0xfcffab82
-gpdr2: 0x1ffff
-gpsr0: 0x8000
-gpsr1: 0x3f0002
-gpsr2: 0x1c000
-
-
-#define CFG_GAFR0_L_VAL	0x80001005
-#define CFG_GAFR0_U_VAL	0xa5128012
-#define CFG_GAFR1_L_VAL	0x699a9558
-#define CFG_GAFR1_U_VAL	0xaaa5aa6a
-#define CFG_GAFR2_L_VAL	0xaaaaaaaa
-#define CFG_GAFR2_U_VAL	0x2
-#define CFG_GPCR0_VAL	0x1800400
-#define CFG_GPCR1_VAL	0x0
-#define CFG_GPCR2_VAL	0x0
-#define CFG_GPDR0_VAL	0xc1818440
-#define CFG_GPDR1_VAL	0xfcffab82
-#define CFG_GPDR2_VAL	0x1ffff
-#define CFG_GPSR0_VAL	0x8000
-#define CFG_GPSR1_VAL	0x3f0002
-#define CFG_GPSR2_VAL	0x1c000
-
-
-GPIO: 0, dir=0, set=0, clr=0, alt=none, desc=USER_RESET#
-GPIO: 1, dir=0, set=0, clr=0, alt=gpio reset, desc=USER_RESET#
-GPIO: 2, dir=0, set=0, clr=0, alt=gpio, desc=BAT_DATA
-GPIO: 3, dir=0, set=0, clr=0, alt=gpio, desc=MQ_IRQ#
-GPIO: 4, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_ETH
-GPIO: 5, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_TOUCH#
-GPIO: 6, dir=1, set=0, clr=0, alt=MMC clk, desc=MMC_CLK
-GPIO: 7, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S0_CD#
-GPIO: 8, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S1_CD#
-GPIO: 9, dir=0, set=0, clr=0, alt=gpio, desc=MMC_CD#
-GPIO: 10, dir=1, set=0, clr=1, alt=gpio, desc=GPIO_10/RTC_CLK/debug LED
-GPIO: 11, dir=0, set=0, clr=0, alt=gpio, desc=3M6_CLK
-GPIO: 12, dir=0, set=0, clr=0, alt=gpio, desc=GPIO_12/32K_CLK
-GPIO: 13, dir=0, set=0, clr=0, alt=gpio, desc=MBGNT
-GPIO: 14, dir=0, set=0, clr=0, alt=gpio, desc=MBREQ
-GPIO: 15, dir=1, set=1, clr=0, alt=nCS_1, desc=CS1#
-GPIO: 16, dir=1, set=0, clr=0, alt=PWM0, desc=PWM0
-GPIO: 17, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_AXB
-GPIO: 18, dir=0, set=0, clr=0, alt=RDY, desc=RDY
-GPIO: 19, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ1, PCC_SO_IRQ_O#
-GPIO: 20, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ0
-GPIO: 21, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_IDE, PFI
-GPIO: 22, dir=0, set=0, clr=0, alt=gpio, desc=Consumer IR, PCC_S1_IRQ_O#
-GPIO: 23, dir=1, set=0, clr=1, alt=SSP SCLK, desc=SSP_SCLK
-GPIO: 24, dir=1, set=0, clr=1, alt=SSP SFRM, desc=SSP_SFRM
-GPIO: 25, dir=0, set=0, clr=0, alt=gpio, desc=SSP_TXD
-GPIO: 26, dir=0, set=0, clr=0, alt=SSP RXD, desc=SSP_RXD
-GPIO: 27, dir=0, set=0, clr=0, alt=gpio, desc=SSP_EXTCLK
-GPIO: 28, dir=0, set=0, clr=0, alt=AC97 bitclk in, I2S bitclock out, desc=AC_BITCLK
-GPIO: 29, dir=0, set=0, clr=0, alt=AC97 SDATA_IN0, desc=AUD_SDIN0
-GPIO: 30, dir=1, set=0, clr=0, alt=AC97 SDATA_OUT, desc=AC_SDOUT
-GPIO: 31, dir=1, set=0, clr=0, alt=AC97 SYNC, desc=AC_SYNC
-GPIO: 32, dir=0, set=0, clr=0, alt=gpio, desc=AUD_SDIN1
-GPIO: 33, dir=1, set=1, clr=0, alt=nCS_5, desc=CS5#
-GPIO: 34, dir=0, set=0, clr=0, alt=FF RXD, desc=FF_RXD
-GPIO: 35, dir=0, set=0, clr=0, alt=FF CTS, desc=FF_CTS
-GPIO: 36, dir=0, set=0, clr=0, alt=FF DCD, desc=FF_DCD
-GPIO: 37, dir=0, set=0, clr=0, alt=FF DSR, desc=FF_DSR
-GPIO: 38, dir=0, set=0, clr=0, alt=FF RI, desc=FF_RI
-GPIO: 39, dir=1, set=0, clr=0, alt=FF TXD, desc=FF_TXD
-GPIO: 40, dir=1, set=0, clr=0, alt=FF DTR, desc=FF_DTR
-GPIO: 41, dir=1, set=0, clr=0, alt=FF RTS, desc=FF_RTS
-GPIO: 42, dir=0, set=0, clr=0, alt=BT RXD, desc=BT_RXD
-GPIO: 43, dir=1, set=0, clr=0, alt=BT TXD, desc=BT_TXD
-GPIO: 44, dir=0, set=0, clr=0, alt=BT CTS, desc=BT_CTS
-GPIO: 45, dir=1, set=0, clr=0, alt=BT RTS, desc=BT_RTS
-GPIO: 46, dir=0, set=0, clr=0, alt=STD RXD, desc=IR_RXD
-GPIO: 47, dir=1, set=0, clr=0, alt=STD TXD, desc=IR_TXD
-GPIO: 48, dir=1, set=1, clr=0, alt=nPOE, desc=PCC_OE#
-GPIO: 49, dir=1, set=1, clr=0, alt=nPWE, desc=PCC_WE#
-GPIO: 50, dir=1, set=1, clr=0, alt=nPIOR, desc=PCC_IOR#
-GPIO: 51, dir=1, set=1, clr=0, alt=nPIOW, desc=PCC_IOW#
-GPIO: 52, dir=1, set=1, clr=0, alt=nPCE[1], desc=PCC_CE1#
-GPIO: 53, dir=1, set=1, clr=0, alt=nPCE[2], desc=PCC_CE2#
-GPIO: 54, dir=1, set=0, clr=0, alt=nPSKSEL, desc=PCC_SCKSEL
-GPIO: 55, dir=1, set=0, clr=0, alt=nPREG, desc=PCC_REG#
-GPIO: 56, dir=0, set=0, clr=0, alt=nPWAIT, desc=PCC_WAIT#
-GPIO: 57, dir=0, set=0, clr=0, alt=nIOIS16, desc=PCC_IOIS16#
-GPIO: 58, dir=1, set=0, clr=0, alt=LDD[0], desc=LDD0
-GPIO: 59, dir=1, set=0, clr=0, alt=LDD[1], desc=LDD1
-GPIO: 60, dir=1, set=0, clr=0, alt=LDD[2], desc=LDD2
-GPIO: 61, dir=1, set=0, clr=0, alt=LDD[3], desc=LDD3
-GPIO: 62, dir=1, set=0, clr=0, alt=LDD[4], desc=LDD4
-GPIO: 63, dir=1, set=0, clr=0, alt=LDD[5], desc=LDD5
-GPIO: 64, dir=1, set=0, clr=0, alt=LDD[6], desc=LDD6
-GPIO: 65, dir=1, set=0, clr=0, alt=LDD[7], desc=LDD7
-GPIO: 66, dir=1, set=0, clr=0, alt=LDD[8], desc=LDD8
-GPIO: 67, dir=1, set=0, clr=0, alt=LDD[9], desc=LDD9
-GPIO: 68, dir=1, set=0, clr=0, alt=LDD[10], desc=LDD10
-GPIO: 69, dir=1, set=0, clr=0, alt=LDD[11], desc=LDD11
-GPIO: 70, dir=1, set=0, clr=0, alt=LDD[12], desc=LDD12
-GPIO: 71, dir=1, set=0, clr=0, alt=LDD[13], desc=LDD13
-GPIO: 72, dir=1, set=0, clr=0, alt=LDD[14], desc=LDD14
-GPIO: 73, dir=1, set=0, clr=0, alt=LDD[15], desc=LDD15
-GPIO: 74, dir=1, set=0, clr=0, alt=LCD_FCLK, desc=FCLK
-GPIO: 75, dir=1, set=0, clr=0, alt=LCD_LCLK, desc=LCLK
-GPIO: 76, dir=1, set=0, clr=0, alt=LCD_PCLK, desc=PCLK
-GPIO: 77, dir=1, set=0, clr=0, alt=LCD_ACBIAS, desc=ACBIAS
-GPIO: 78, dir=1, set=1, clr=0, alt=nCS_2, desc=CS2#
-GPIO: 79, dir=1, set=1, clr=0, alt=nCS_3, desc=CS3#
-GPIO: 80, dir=1, set=1, clr=0, alt=nCS_4, desc=CS4#
-GPIO: 81, dir=0, set=0, clr=0, alt=gpio, desc=
-GPIO: 82, dir=0, set=0, clr=0, alt=gpio, desc=
-GPIO: 83, dir=0, set=0, clr=0, alt=gpio, desc=
-GPIO: 84, dir=0, set=0, clr=0, alt=gpio, desc=
diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py
deleted file mode 100644
index c4bcb4b0ad..0000000000
--- a/board/pxa255_idp/pxa_reg_calcs.py
+++ /dev/null
@@ -1,311 +0,0 @@
-#!/usr/bin/python
-
-# (C) Copyright 2004
-# BEC Systems <http://bec-systems.com>
-# Cliff Brake <cliff.brake@gmail.com>
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-# calculations for PXA255 registers
-
-class gpio:
-	dir = '0'
-	set = '0'
-	clr = '0'
-	alt = '0'
-	desc = ''
-
-	def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''):
-		self.dir = dir
-		self.set = set
-		self.clr = clr
-		self.alt = alt
-		self.desc = desc
-		
-
-# the following is a dictionary of all GPIOs in the system
-# the key is the GPIO number
-
-
-pxa255_alt_func = {
-	0: ['gpio', 'none', 'none', 'none'],
-	1: ['gpio', 'gpio reset', 'none', 'none'],
-	2: ['gpio', 'none', 'none', 'none'],
-	3: ['gpio', 'none', 'none', 'none'],
-	4: ['gpio', 'none', 'none', 'none'],
-	5: ['gpio', 'none', 'none', 'none'],
-	6: ['gpio', 'MMC clk', 'none', 'none'],
-	7: ['gpio', '48MHz clock', 'none', 'none'],
-	8: ['gpio', 'MMC CS0', 'none', 'none'],
-	9: ['gpio', 'MMC CS1', 'none', 'none'],
-	10: ['gpio', 'RTC Clock', 'none', 'none'],
-	11: ['gpio', '3.6MHz', 'none', 'none'],
-	12: ['gpio', '32KHz', 'none', 'none'],
-	13: ['gpio', 'none', 'MBGNT', 'none'],
-	14: ['gpio', 'MBREQ', 'none', 'none'],
-	15: ['gpio', 'none', 'nCS_1', 'none'],
-	16: ['gpio', 'none', 'PWM0', 'none'],
-	17: ['gpio', 'none', 'PWM1', 'none'],
-	18: ['gpio', 'RDY', 'none', 'none'],
-	19: ['gpio', 'DREQ[1]', 'none', 'none'],
-	20: ['gpio', 'DREQ[0]', 'none', 'none'],
-	21: ['gpio', 'none', 'none', 'none'],
-	22: ['gpio', 'none', 'none', 'none'],
-	23: ['gpio', 'none', 'SSP SCLK', 'none'],
-	24: ['gpio', 'none', 'SSP SFRM', 'none'],
-	25: ['gpio', 'none', 'SSP TXD', 'none'],
-	26: ['gpio', 'SSP RXD', 'none', 'none'],
-	27: ['gpio', 'SSP EXTCLK', 'none', 'none'],
-	28: ['gpio', 'AC97 bitclk in, I2S bitclock out', 'I2S bitclock in', 'none'],
-	29: ['gpio', 'AC97 SDATA_IN0', 'I2S SDATA_IN', 'none'],
-	30: ['gpio', 'I2S SDATA_OUT', 'AC97 SDATA_OUT', 'none'],
-	31: ['gpio', 'I2S SYNC', 'AC97 SYNC', 'none'],
-	32: ['gpio', 'AC97 SDATA_IN1', 'I2S SYSCLK', 'none'],
-	33: ['gpio', 'none', 'nCS_5', 'none'],
-	34: ['gpio', 'FF RXD', 'MMC CS0', 'none'],
-	35: ['gpio', 'FF CTS', 'none', 'none'],
-	36: ['gpio', 'FF DCD', 'none', 'none'],
-	37: ['gpio', 'FF DSR', 'none', 'none'],
-	38: ['gpio', 'FF RI', 'none', 'none'],
-	39: ['gpio', 'MMC CS1', 'FF TXD', 'none'],
-	40: ['gpio', 'none', 'FF DTR', 'none'],
-	41: ['gpio', 'none', 'FF RTS', 'none'],
-	42: ['gpio', 'BT RXD', 'none', 'HW RXD'],
-	43: ['gpio', 'none', 'BT TXD', 'HW TXD'],
-	44: ['gpio', 'BT CTS', 'none', 'HW CTS'],
-	45: ['gpio', 'none', 'BT RTS', 'HW RTS'],
-	46: ['gpio', 'ICP_RXD', 'STD RXD', 'none'],
-	47: ['gpio', 'STD TXD', 'ICP_TXD', 'none'],
-	48: ['gpio', 'HW TXD', 'nPOE', 'none'],
-	49: ['gpio', 'HW RXD', 'nPWE', 'none'],
-	50: ['gpio', 'HW CTS', 'nPIOR', 'none'],
-	51: ['gpio', 'nPIOW', 'HW RTS', 'none'],
-	52: ['gpio', 'none', 'nPCE[1]', 'none'],
-	53: ['gpio', 'MMC CLK', 'nPCE[2]', 'none'],
-	54: ['gpio', 'MMC CLK', 'nPSKSEL', 'none'],
-	55: ['gpio', 'none', 'nPREG', 'none'],
-	56: ['gpio', 'nPWAIT', 'none', 'none'],
-	57: ['gpio', 'nIOIS16', 'none', 'none'],
-	58: ['gpio', 'none', 'LDD[0]', 'none'],
-	59: ['gpio', 'none', 'LDD[1]', 'none'],
-	60: ['gpio', 'none', 'LDD[2]', 'none'],
-	61: ['gpio', 'none', 'LDD[3]', 'none'],
-	62: ['gpio', 'none', 'LDD[4]', 'none'],
-	63: ['gpio', 'none', 'LDD[5]', 'none'],
-	64: ['gpio', 'none', 'LDD[6]', 'none'],
-	65: ['gpio', 'none', 'LDD[7]', 'none'],
-	66: ['gpio', 'MBREQ', 'LDD[8]', 'none'],
-	67: ['gpio', 'MMC CS0', 'LDD[9]', 'none'],
-	68: ['gpio', 'MMC CS1', 'LDD[10]', 'none'],
-	69: ['gpio', 'MMC CLK', 'LDD[11]', 'none'],
-	70: ['gpio', 'RTC CLK', 'LDD[12]', 'none'],
-	71: ['gpio', '3.6 MHz', 'LDD[13]', 'none'],
-	72: ['gpio', '32 KHz', 'LDD[14]', 'none'],
-	73: ['gpio', 'MBGNT', 'LDD[15]', 'none'],
-	74: ['gpio', 'none', 'LCD_FCLK', 'none'],
-	75: ['gpio', 'none', 'LCD_LCLK', 'none'],
-	76: ['gpio', 'none', 'LCD_PCLK', 'none'],
-	77: ['gpio', 'none', 'LCD_ACBIAS', 'none'],
-	78: ['gpio', 'none', 'nCS_2', 'none'],
-	79: ['gpio', 'none', 'nCS_3', 'none'],
-	80: ['gpio', 'none', 'nCS_4', 'none'],
-	81: ['gpio', 'NSSPSCLK', 'none', 'none'],
-	82: ['gpio', 'NSSPSFRM', 'none', 'none'],
-	83: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'],
-	84: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'],
-}
-
-
-#def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''):
-
-gpio_list = []
-
-for i in range(0,85):
-	gpio_list.append(gpio())
-
-#chip select GPIOs
-gpio_list[18] = gpio(0, 0, 0, 1, 'RDY')
-gpio_list[33] = gpio(1, 1, 0, 2, 'CS5#')
-gpio_list[80] = gpio(1, 1, 0, 2, 'CS4#')
-gpio_list[79] = gpio(1, 1, 0, 2, 'CS3#')
-gpio_list[78] = gpio(1, 1, 0, 2, 'CS2#')
-gpio_list[15] = gpio(1, 1, 0, 2, 'CS1#')
-gpio_list[22] = gpio(0, 0, 0, 0, 'Consumer IR, PCC_S1_IRQ_O#')
-gpio_list[21] = gpio(0, 0, 0, 0, 'IRQ_IDE, PFI')
-gpio_list[19] = gpio(0, 0, 0, 0, 'XB_DREQ1, PCC_SO_IRQ_O#')
-gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0')
-gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0')
-gpio_list[17] = gpio(0, 0, 0, 0, 'IRQ_AXB')
-gpio_list[16] = gpio(1, 0, 0, 2, 'PWM0')
-
-# PCMCIA stuff
-gpio_list[57] = gpio(0, 0, 0, 1, 'PCC_IOIS16#')
-gpio_list[56] = gpio(0, 0, 0, 1, 'PCC_WAIT#')
-gpio_list[55] = gpio(1, 0, 0, 2, 'PCC_REG#')
-gpio_list[54] = gpio(1, 0, 0, 2, 'PCC_SCKSEL')
-gpio_list[53] = gpio(1, 1, 0, 2, 'PCC_CE2#')
-gpio_list[52] = gpio(1, 1, 0, 2, 'PCC_CE1#')
-gpio_list[51] = gpio(1, 1, 0, 1, 'PCC_IOW#')
-gpio_list[50] = gpio(1, 1, 0, 2, 'PCC_IOR#')
-gpio_list[49] = gpio(1, 1, 0, 2, 'PCC_WE#')
-gpio_list[48] = gpio(1, 1, 0, 2, 'PCC_OE#')
-
-# SSP port
-gpio_list[26] = gpio(0, 0, 0, 1, 'SSP_RXD')
-gpio_list[25] = gpio(0, 0, 0, 0, 'SSP_TXD')
-gpio_list[24] = gpio(1, 0, 1, 2, 'SSP_SFRM')
-gpio_list[23] = gpio(1, 0, 1, 2, 'SSP_SCLK')
-gpio_list[27] = gpio(0, 0, 0, 0, 'SSP_EXTCLK')
-
-# audio codec
-gpio_list[32] = gpio(0, 0, 0, 0, 'AUD_SDIN1')
-gpio_list[31] = gpio(1, 0, 0, 2, 'AC_SYNC')
-gpio_list[30] = gpio(1, 0, 0, 2, 'AC_SDOUT')
-gpio_list[29] = gpio(0, 0, 0, 1, 'AUD_SDIN0')
-gpio_list[28] = gpio(0, 0, 0, 1, 'AC_BITCLK')
-
-# serial ports
-gpio_list[39] = gpio(1, 0, 0, 2, 'FF_TXD')
-gpio_list[34] = gpio(0, 0, 0, 1, 'FF_RXD')
-gpio_list[41] = gpio(1, 0, 0, 2, 'FF_RTS')
-gpio_list[35] = gpio(0, 0, 0, 1, 'FF_CTS')
-gpio_list[40] = gpio(1, 0, 0, 2, 'FF_DTR')
-gpio_list[37] = gpio(0, 0, 0, 1, 'FF_DSR')
-gpio_list[38] = gpio(0, 0, 0, 1, 'FF_RI')
-gpio_list[36] = gpio(0, 0, 0, 1, 'FF_DCD')
-
-gpio_list[43] = gpio(1, 0, 0, 2, 'BT_TXD')
-gpio_list[42] = gpio(0, 0, 0, 1, 'BT_RXD')
-gpio_list[45] = gpio(1, 0, 0, 2, 'BT_RTS')
-gpio_list[44] = gpio(0, 0, 0, 1, 'BT_CTS')
-
-gpio_list[47] = gpio(1, 0, 0, 1, 'IR_TXD')
-gpio_list[46] = gpio(0, 0, 0, 2, 'IR_RXD')
-
-# misc GPIO signals
-gpio_list[14] = gpio(0, 0, 0, 0, 'MBREQ')
-gpio_list[13] = gpio(0, 0, 0, 0, 'MBGNT')
-gpio_list[12] = gpio(0, 0, 0, 0, 'GPIO_12/32K_CLK')
-gpio_list[11] = gpio(0, 0, 0, 0, '3M6_CLK')
-gpio_list[10] = gpio(1, 0, 1, 0, 'GPIO_10/RTC_CLK/debug LED')
-gpio_list[9] = gpio(0, 0, 0, 0, 'MMC_CD#')
-gpio_list[8] = gpio(0, 0, 0, 0, 'PCC_S1_CD#')
-gpio_list[7] = gpio(0, 0, 0, 0, 'PCC_S0_CD#')
-gpio_list[6] = gpio(1, 0, 0, 1, 'MMC_CLK')
-gpio_list[5] = gpio(0, 0, 0, 0, 'IRQ_TOUCH#')
-gpio_list[4] = gpio(0, 0, 0, 0, 'IRQ_ETH')
-gpio_list[3] = gpio(0, 0, 0, 0, 'MQ_IRQ#')
-gpio_list[2] = gpio(0, 0, 0, 0, 'BAT_DATA')
-gpio_list[1] = gpio(0, 0, 0, 1, 'USER_RESET#')
-gpio_list[0] = gpio(0, 0, 0, 1, 'USER_RESET#')
-
-# LCD GPIOs
-gpio_list[58] = gpio(1, 0, 0, 2, 'LDD0')
-gpio_list[59] = gpio(1, 0, 0, 2, 'LDD1')
-gpio_list[60] = gpio(1, 0, 0, 2, 'LDD2')
-gpio_list[61] = gpio(1, 0, 0, 2, 'LDD3')
-gpio_list[62] = gpio(1, 0, 0, 2, 'LDD4')
-gpio_list[63] = gpio(1, 0, 0, 2, 'LDD5')
-gpio_list[64] = gpio(1, 0, 0, 2, 'LDD6')
-gpio_list[65] = gpio(1, 0, 0, 2, 'LDD7')
-gpio_list[66] = gpio(1, 0, 0, 2, 'LDD8')
-gpio_list[67] = gpio(1, 0, 0, 2, 'LDD9')
-gpio_list[68] = gpio(1, 0, 0, 2, 'LDD10')
-gpio_list[69] = gpio(1, 0, 0, 2, 'LDD11')
-gpio_list[70] = gpio(1, 0, 0, 2, 'LDD12')
-gpio_list[71] = gpio(1, 0, 0, 2, 'LDD13')
-gpio_list[72] = gpio(1, 0, 0, 2, 'LDD14')
-gpio_list[73] = gpio(1, 0, 0, 2, 'LDD15')
-gpio_list[74] = gpio(1, 0, 0, 2, 'FCLK')
-gpio_list[75] = gpio(1, 0, 0, 2, 'LCLK')
-gpio_list[76] = gpio(1, 0, 0, 2, 'PCLK')
-gpio_list[77] = gpio(1, 0, 0, 2, 'ACBIAS')
-
-# calculate registers
-pxa_regs = {
-	'gpdr0':0, 'gpdr1':0, 'gpdr2':0,
-	'gpsr0':0, 'gpsr1':0, 'gpsr2':0,
-	'gpcr0':0, 'gpcr1':0, 'gpcr2':0,
-	'gafr0_l':0, 'gafr0_u':0,
-	'gafr1_l':0, 'gafr1_u':0,
-	'gafr2_l':0, 'gafr2_u':0,
-}
-
-# U-boot define names
-uboot_reg_names = {
-	'gpdr0':'CFG_GPDR0_VAL', 'gpdr1':'CFG_GPDR1_VAL', 'gpdr2':'CFG_GPDR2_VAL',
-	'gpsr0':'CFG_GPSR0_VAL', 'gpsr1':'CFG_GPSR1_VAL', 'gpsr2':'CFG_GPSR2_VAL',
-	'gpcr0':'CFG_GPCR0_VAL', 'gpcr1':'CFG_GPCR1_VAL', 'gpcr2':'CFG_GPCR2_VAL',
-	'gafr0_l':'CFG_GAFR0_L_VAL', 'gafr0_u':'CFG_GAFR0_U_VAL',
-	'gafr1_l':'CFG_GAFR1_L_VAL', 'gafr1_u':'CFG_GAFR1_U_VAL',
-	'gafr2_l':'CFG_GAFR2_L_VAL', 'gafr2_u':'CFG_GAFR2_U_VAL',
-}
-
-# bit mappings
-
-bit_mappings = [
-
-{ 'gpio':(0,32),  'shift':1, 'regs':{'dir':'gpdr0', 'set':'gpsr0', 'clr':'gpcr0'} },
-{ 'gpio':(32,64), 'shift':1, 'regs':{'dir':'gpdr1', 'set':'gpsr1', 'clr':'gpcr1'} },
-{ 'gpio':(64,85), 'shift':1, 'regs':{'dir':'gpdr2', 'set':'gpsr2', 'clr':'gpcr2'} },
-{ 'gpio':(0,16),  'shift':2, 'regs':{'alt':'gafr0_l'} },
-{ 'gpio':(16,32), 'shift':2, 'regs':{'alt':'gafr0_u'} },
-{ 'gpio':(32,48), 'shift':2, 'regs':{'alt':'gafr1_l'} },
-{ 'gpio':(48,64), 'shift':2, 'regs':{'alt':'gafr1_u'} },
-{ 'gpio':(64,80), 'shift':2, 'regs':{'alt':'gafr2_l'} },
-{ 'gpio':(80,85), 'shift':2, 'regs':{'alt':'gafr2_u'} },
-
-]
-
-def stuff_bits(bit_mapping, gpio_list):
-	gpios = range( bit_mapping['gpio'][0], bit_mapping['gpio'][1])
-
-	for gpio in gpios:
-		for reg in bit_mapping['regs'].keys():
-			value = eval( 'gpio_list[gpio].%s' % (reg) )
-			if ( value ):
-				# we have a high bit
-				bit_shift = (gpio - bit_mapping['gpio'][0]) * bit_mapping['shift']
-				bit = value << (bit_shift)
-				pxa_regs[bit_mapping['regs'][reg]] |= bit
-
-for i in bit_mappings:
-	stuff_bits(i, gpio_list)
-
-# now print out all regs
-registers = pxa_regs.keys()
-registers.sort()
-for reg in registers:
-	print '%s: 0x%x' % (reg, pxa_regs[reg])
-
-# print define to past right into U-Boot source code
-
-print 
-print 
-
-for reg in registers:
-	print '#define %s	0x%x' % (uboot_reg_names[reg], pxa_regs[reg])
-
-# print all GPIOS
-print
-print
-
-for i in range(len(gpio_list)):
-	gpio_i = gpio_list[i]
-	alt_func_desc = pxa255_alt_func[i][gpio_i.alt]
-	print 'GPIO: %i, dir=%i, set=%i, clr=%i, alt=%s, desc=%s' % (i, gpio_i.dir, gpio_i.set, gpio_i.clr, alt_func_desc, gpio_i.desc)
-
-
diff --git a/board/pxa255_idp/u-boot.lds b/board/pxa255_idp/u-boot.lds
deleted file mode 100644
index 20ce108938..0000000000
--- a/board/pxa255_idp/u-boot.lds
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/pxa/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/quantum/Makefile b/board/quantum/Makefile
deleted file mode 100644
index c7a1d05518..0000000000
--- a/board/quantum/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o fpga.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/quantum/config.mk b/board/quantum/config.mk
deleted file mode 100644
index 7cb374eb85..0000000000
--- a/board/quantum/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# RMU boards
-#
-
-TEXT_BASE = 0xfff00000
diff --git a/board/quantum/fpga.c b/board/quantum/fpga.c
deleted file mode 100644
index 75c2658e8a..0000000000
--- a/board/quantum/fpga.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/* The DEBUG define must be before common to enable debugging */
-#undef DEBUG
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include "fpga.h"
-/* ------------------------------------------------------------------------- */
-
-#define MAX_ONES               226
-
-/* MPC850 port D */
-#define PD(bit) (1 << (15 - (bit)))
-# define FPGA_INIT             PD(11)	/* FPGA init pin (ppc input)     */
-# define FPGA_PRG              PD(12)	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              PD(13)	/* FPGA clk pin (ppc output)     */
-# define FPGA_DATA             PD(14)	/* FPGA data pin (ppc output)    */
-# define FPGA_DONE             PD(15)	/* FPGA done pin (ppc input)     */
-
-
-/* DDR 0 - input, 1 - output */
-#define FPGA_INIT_PDDIR          FPGA_PRG | FPGA_CLK | FPGA_DATA	/* just set outputs */
-
-
-#define SET_FPGA(data)         immr->im_ioport.iop_pddat = (data)
-#define GET_FPGA               immr->im_ioport.iop_pddat
-
-#define FPGA_WRITE_1 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-#define FPGA_WRITE_0 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-
-int fpga_boot (unsigned char *fpgadata, int size)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	int i, index, len;
-	int count;
-
-#ifdef CFG_FPGA_SPARTAN2
-	int j;
-	unsigned char data;
-#else
-	unsigned char b;
-	int bit;
-#endif
-
-	debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size);
-
-	/* display infos on fpgaimage */
-	printf ("FPGA:");
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf (" %s", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-	printf ("\n");
-
-
-	index = 0;
-
-#ifdef CFG_FPGA_SPARTAN2
-	/* search for preamble 0xFFFFFFFF */
-	while (1) {
-		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
-		    && (fpgadata[index + 2] == 0xff)
-		    && (fpgadata[index + 3] == 0xff))
-			break;	/* preamble found */
-		else
-			index++;
-	}
-#else
-	/* search for preamble 0xFF2X */
-	for (index = 0; index < size - 1; index++) {
-		if ((fpgadata[index] == 0xff)
-		    && ((fpgadata[index + 1] & 0xf0) == 0x30))
-			break;
-	}
-	index += 2;
-#endif
-
-	debug ("FPGA: configdata starts at position 0x%x\n", index);
-	debug ("FPGA: length of fpga-data %d\n", size - index);
-
-	/*
-	 * Setup port pins for fpga programming
-	 */
-	immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR;
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Init fpga by asserting and deasserting PROGRAM*
-	 */
-	SET_FPGA (FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA init line low */
-	count = 0;
-	while (GET_FPGA & FPGA_INIT) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout - 100us max, so use 3ms */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_LOW;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/* deassert PROGRAM* */
-	SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA end of init period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_INIT)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_HIGH;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	debug ("write configuration data into fpga\n");
-	/* write configuration-data into fpga... */
-
-#ifdef CFG_FPGA_SPARTAN2
-	/*
-	 * Load uncompressed image into fpga
-	 */
-	for (i = index; i < size; i++) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
-		if ((i % 1024) == 0)
-			printf ("%6d out of %6d\r", i, size);	/* let them know we are alive */
-#endif
-
-		data = fpgadata[i];
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-	/* add some 0xff to the end of the file */
-	for (i = 0; i < 8; i++) {
-		data = 0xff;
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-#else
-	/* send 0xff 0x20 */
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-
-	/*
-	 ** Bit_DeCompression
-	 **   Code 1           .. maxOnes     : n                 '1's followed by '0'
-	 **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
-	 **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
-	 **        255                        :                   '1'
-	 */
-
-	for (i = index; i < size; i++) {
-		b = fpgadata[i];
-		if ((b >= 1) && (b <= MAX_ONES)) {
-			for (bit = 0; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-			FPGA_WRITE_0;
-		} else if (b == (MAX_ONES + 1)) {
-			for (bit = 1; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-		} else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
-			for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
-				FPGA_WRITE_0;
-			}
-			FPGA_WRITE_1;
-		} else if (b == 255) {
-			FPGA_WRITE_1;
-		}
-	}
-#endif
-	debug ("\n\n");
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Check if fpga's DONE signal - correctly booted ?
-	 */
-
-	/* Wait for FPGA end of programming period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_DONE)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_DONE;
-		}
-	}
-
-	debug ("FPGA: Booting successful!\n");
-	return 0;
-}
diff --git a/board/quantum/fpga.h b/board/quantum/fpga.h
deleted file mode 100644
index 2ef45e59b1..0000000000
--- a/board/quantum/fpga.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Virtex2 FPGA configuration support for the QUANTUM computer
- */
-int fpga_boot(unsigned char *fpgadata, int size);
-
-#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
-#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
-#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
-/* vim: set ts=4 sw=4 tw=78: */
diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c
deleted file mode 100644
index afa6e113d8..0000000000
--- a/board/quantum/quantum.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "fpga.h"
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-unsigned long flash_init (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
-	0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
-	0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 * (Initialization code at 0x36)
-	 */
-	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char *s = getenv ("serial#");
-
-	puts ("Board QUANTUM, Serial No: ");
-
-	for (; s && *s; ++s) {
-		if (*s == ' ')
-			break;
-		putc (*s);
-	}
-	putc ('\n');
-	return (0);		/* success */
-}
-
-/* ------------------------------------------------------------------------- */
-
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size9;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-
-	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002136;	/* SDRAM bank 0 */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size,
-	 * 9 column mode
-	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
-			   SDRAM_MAX_SIZE);
-	/*
-	 * Final mapping:
-	 */
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	udelay (1000);
-
-	return (size9);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile ulong *addr;
-	ulong cnt, val, size;
-	ulong save[32];		/* to make test non-destructive */
-	unsigned char i = 0;
-
-	memctl->memc_mamr = mamr_value;
-
-	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		save[i++] = *addr;
-		*addr = ~cnt;
-	}
-
-	/* write 0 to base address */
-	addr = (volatile ulong *)base;
-	save[i] = *addr;
-	*addr = 0;
-
-	/* check at base address */
-	if ((val = *addr) != 0) {
-		/* Restore the original data before leaving the function.
-		 */
-		*addr = save[i];
-		for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-			addr = (volatile ulong *) base + cnt;
-			*addr = save[--i];
-		}
-		return (0);
-	}
-
-	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		val = *addr;
-		*addr = save[--i];
-
-		if (val != (~cnt)) {
-			size = cnt * sizeof (long);
-			/* Restore the original data before returning
-			 */
-			for (cnt <<= 1; cnt <= maxsize / sizeof (long);
-			     cnt <<= 1) {
-				addr = (volatile ulong *) base + cnt;
-				*addr = save[--i];
-			}
-			return (size);
-		}
-	}
-	return (maxsize);
-}
-
-/*
- * Miscellaneous intialization
- */
-int misc_init_r (void)
-{
-	char *fpga_data_str = getenv ("fpgadata");
-	char *fpga_size_str = getenv ("fpgasize");
-	void *fpga_data;
-	int fpga_size;
-	int status;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int flash_size;
-
-	/* Remap FLASH according to real size */
-	flash_size = flash_init ();
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	if (fpga_data_str && fpga_size_str) {
-		fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16);
-		fpga_size = simple_strtoul (fpga_size_str, NULL, 10);
-
-		status = fpga_boot (fpga_data, fpga_size);
-		if (status != 0) {
-			printf ("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf ("(Timeout: DONE not high after programming FPGA)\n ");
-				break;
-			}
-		}
-	}
-	return 0;
-}
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
deleted file mode 100644
index 049f9901f7..0000000000
--- a/board/quantum/u-boot.lds
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_ppc/ppcstring.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-/* XXX ?
-    . = env_offset;
-*/
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug
deleted file mode 100644
index 894b9bd25b..0000000000
--- a/board/quantum/u-boot.lds.debug
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/r5200/Makefile b/board/r5200/Makefile
deleted file mode 100644
index 424ab1cf9e..0000000000
--- a/board/r5200/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/r5200/config.mk b/board/r5200/config.mk
deleted file mode 100644
index 8fc5319798..0000000000
--- a/board/r5200/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x10000000
diff --git a/board/r5200/r5200.c b/board/r5200/r5200.c
deleted file mode 100644
index 69f3a765b6..0000000000
--- a/board/r5200/r5200.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5271.h>
-#include <asm/immap_5271.h>
-
-
-int checkboard (void) {
-	puts ("Board: R5200 Ethernet Module\n");
-	return 0;
-};
-
-long int initdram (int board_type) {
-	int i;
-
-	/*
-	 *  Set CS2 pin to be SD_CS0
-	 */
-	mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS)
-			| MCF_GPIO_PAR_CS_PAR_CS2);
-
-	mbar_writeByte(MCF_GPIO_PAR_SDRAM, mbar_readByte(MCF_GPIO_PAR_SDRAM)
-			| MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(0x01));
-
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
-		/*
-		 * Initialize DRAM Control Register: DCR
-		 */
-		mbar_writeShort(MCF_SDRAMC_DCR, MCF_SDRAMC_DCR_RTIM(0x01)
-				| MCF_SDRAMC_DCR_RC(0x30));
-
-		/*
-		 * Initialize DACR0
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18)
-				| MCF_SDRAMC_DACRn_CASL(0)
-				| MCF_SDRAMC_DACRn_CBM(3)
-				| MCF_SDRAMC_DACRn_PS(2));
-
-		/*
-		 * Initialize DMR0
-		 */
-		mbar_writeLong(MCF_SDRAMC_DMR0,
-				MCF_SDRAMC_DMRn_BAM_8M
-				| MCF_SDRAMC_DMRn_V);
-
-		/*
-		 * Set IP bit in DACR
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_IP);
-
-		/*
-		 * Wait at least 20ns to allow banks to precharge
-		 */
-		for (i = 0; i < 5; i++)
-			asm(" nop");
-
-		/*
-		 * Write to this block to initiate precharge
-		 */
-		*(u16 *)(CFG_SDRAM_BASE) = 0x9696;
-
-		/*
-		 * Set RE bit in DACR
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_RE);
-
-
-		/*
-		 * Wait for at least 8 auto refresh cycles to occur
-		 */
-		for (i = 0; i < 2000; i++)
-			asm(" nop");
-
-		/*
-		 * Finish the configuration by issuing the MRS.
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_MRS);
-
-
-		/*
-		 * Write to the SDRAM Mode Register
-		 */
-		*(u16 *)(CFG_SDRAM_BASE + 0x1000) = 0x9696;
-	}
-
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-};
-
-int testdram (void) {
-	/* TODO: XXX XXX XXX */
-	printf ("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/r5200/u-boot.lds b/board/r5200/u-boot.lds
deleted file mode 100644
index f7dc070904..0000000000
--- a/board/r5200/u-boot.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(m68k)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mcf52x2/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    cpu/mcf52x2/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    *(.got)
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   _sbss = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/rattler/Makefile b/board/rattler/Makefile
deleted file mode 100644
index be7e213a9b..0000000000
--- a/board/rattler/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/rattler/config.mk b/board/rattler/config.mk
deleted file mode 100644
index 5fca8c7c69..0000000000
--- a/board/rattler/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2001-2005
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Rattler series boards by Analogue & Micro
-#
-
-TEXT_BASE = 0xFE000000
diff --git a/board/rattler/rattler.c b/board/rattler/rattler.c
deleted file mode 100644
index be7977dec4..0000000000
--- a/board/rattler/rattler.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Analogue&Micro Rattler boards family.
- * Tested on Rattler8248.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 1,          0,   0,   1,   0,   1 }, /* Eth PHYs reset  */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10            */
-	/* PA9  */ { 0,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PA8  */ { 0,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB14 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30            */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK11) */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19            */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
-	/* PC17 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK15) */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12            */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11            */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          0,   0,   1,   0,   1 }, /* MDIO            */
-	/* PC8  */ { 1,          0,   0,   1,   0,   1 }, /* MDC             */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 TxD        */
-	/* PC4  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 RxD        */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RxD        */
-	/* PD30 */ { 1,          1,   1,   1,   0,   0 }, /* SCC1 TxD        */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 0,          0,   0,   0,   0,   0 }, /* PD22            */
-	/* PD21 */ { 0,          0,   0,   0,   0,   0 }, /* PD21            */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD20            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-	/* PD15 */ { 0,          0,   0,   0,   0,   0 }, /* PD15            */
-	/* PD14 */ { 0,          0,   0,   0,   0,   0 }, /* PD14            */
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 0,          0,   0,   0,   0,   0 }, /* PD9             */
-	/* PD8  */ { 0,          0,   0,   0,   0,   0 }, /* PD8             */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-long int initdram(int board_type)
-{
-	long int msize = CFG_SDRAM_SIZE;
-
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
-	uchar c = 0xFF;
-	uint psdmr = CFG_PSDMR;
-	int i;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x02;
-	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;  /* Mode Register write */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
-	*ramaddr = c;
-#endif /* !CFG_RAMBOOT */
-
-	/* Return total 60x bus SDRAM size */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	printf("Board: Rattler Rev. %c\n", bcsr[0x20] + 0x40);
-	return 0;
-}
diff --git a/board/rattler/u-boot.lds b/board/rattler/u-boot.lds
deleted file mode 100644
index 522e6daa53..0000000000
--- a/board/rattler/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
deleted file mode 100644
index 3b094ce1d4..0000000000
--- a/board/sandburst/karef/Makefile
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2005
-# Sandburst Corporation
-# Travis B. Sawyer
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-# TBS: add for debugging purposes
-BUILDUSER := $(shell whoami)
-FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
-
-CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
-# TBS: end debugging
-
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
-	../common/sb_common.o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend *~
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk
deleted file mode 100644
index 65c1e48658..0000000000
--- a/board/sandburst/karef/config.mk
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2005
-# Sandburst Corporation
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Sandburst Corporation Metrobox Reference Design
-# Travis B. Sawyer
-#
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFF80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/sandburst/karef/hal_ka_of_auto.h b/board/sandburst/karef/hal_ka_of_auto.h
deleted file mode 100644
index cc501c99d9..0000000000
--- a/board/sandburst/karef/hal_ka_of_auto.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip ka_of
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_KA_OF_AUTO_H
-#define HAL_KA_OF_AUTO_H
-
-
-/* ----------------------------------------------------------------
- * For block: 'ofem'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define OFEM_BLOCK_ADDR_BIT_L 6
-#define OFEM_BLOCK_ADDR_BIT_H 9
-#define OFEM_BLOCK_ADDR_WIDTH 4
-
-#define  OFEM_ADDR  0x0
-
-/* ---- Reg addressing (within block) */
-#define OFEM_REG_ADDR_BIT_L 2
-#define OFEM_REG_ADDR_BIT_H 5
-#define OFEM_REG_ADDR_WIDTH 4
-
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_REVISION */
-#define SAND_HAL_KA_OF_OFEM_REVISION_OFFSET    0x000
-#ifndef SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_REVISION_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_REVISION_MSB     31
-#define SAND_HAL_KA_OF_OFEM_REVISION_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_RESET */
-#define SAND_HAL_KA_OF_OFEM_RESET_OFFSET    0x004
-#ifndef SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_RESET_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_RESET_MSB     31
-#define SAND_HAL_KA_OF_OFEM_RESET_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_CNTL */
-#define SAND_HAL_KA_OF_OFEM_CNTL_OFFSET    0x018
-#ifndef SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_CNTL_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_CNTL_MSB     31
-#define SAND_HAL_KA_OF_OFEM_CNTL_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_MAC_FLOW_CTL */
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_OFFSET    0x01c
-#ifndef SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MSB     31
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_INTERRUPT */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_OFFSET    0x008
-#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MSB     31
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_INTERRUPT_MASK */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_OFFSET    0x00c
-#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MSB     31
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_SCRATCH */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_OFFSET    0x010
-#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MSB     31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_LSB      0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_SCRATCH_MASK */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_OFFSET    0x014
-#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MSB     31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_LSB      0
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_REVISION */
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK    0x0000ff00
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT    8
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MSB    15
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_LSB    8
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_DEFAULT    0x00000024
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK    0x000000ff
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MSB    7
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_LSB    0
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_RESET */
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK    0x00000004
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_SHIFT    2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MSB    2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_LSB    2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK    0x00000002
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_SHIFT    1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MSB    1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_LSB    1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK    0x00000001
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MSB    0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_LSB    0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_CNTL */
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MASK    0x000000c0
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_SHIFT    6
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MSB    7
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_LSB    6
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK    0x00000030
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT    4
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MSB    5
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_LSB    4
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MASK    0x0000000c
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_SHIFT    2
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MSB    3
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_LSB    2
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MASK    0x00000003
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MSB    1
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_LSB    0
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_MAC_FLOW_CTL */
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MASK    0x00000100
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_SHIFT    8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MSB    8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_LSB    8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK    0x00000010
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT    4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB    4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB    4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK    0x0000000f
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB    3
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB    0
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_INTERRUPT */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MASK    0x00000100
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_SHIFT    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MSB    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_LSB    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MASK    0x00000080
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_SHIFT    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MSB    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_LSB    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MASK    0x00000040
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_SHIFT    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MSB    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_LSB    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MASK    0x00000020
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_SHIFT    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MSB    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_LSB    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MASK    0x00000010
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_SHIFT    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MSB    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_LSB    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MASK    0x00000008
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_SHIFT    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MSB    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_LSB    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MASK    0x00000004
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_SHIFT    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MSB    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_LSB    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MASK    0x00000002
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_SHIFT    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MSB    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_LSB    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MASK    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MSB    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_LSB    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_INTERRUPT_MASK */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK    0x00000100
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB    8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK    0x00000080
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB    7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK    0x00000040
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB    6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK    0x00000020
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB    5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK    0x00000010
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB    4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK    0x00000008
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB    3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK    0x00000004
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB    2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK    0x00000002
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB    1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK    0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB    0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT    0x00000001
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_SCRATCH */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MSB    31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_LSB    0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_SCRATCH_MASK */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
-
-#endif /* matches #ifndef HAL_KA_OF_AUTO_H */
diff --git a/board/sandburst/karef/hal_ka_sc_auto.h b/board/sandburst/karef/hal_ka_sc_auto.h
deleted file mode 100644
index db1cec246a..0000000000
--- a/board/sandburst/karef/hal_ka_sc_auto.h
+++ /dev/null
@@ -1,836 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip ka_sc
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_KA_SC_AUTO_H
-#define HAL_KA_SC_AUTO_H
-
-
-/* ----------------------------------------------------------------
- * For block: 'scan'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define SCAN_BLOCK_ADDR_BIT_L 7
-#define SCAN_BLOCK_ADDR_BIT_H 9
-#define SCAN_BLOCK_ADDR_WIDTH 3
-
-#define  SCAN_ADDR  0x0
-
-/* ---- Reg addressing (within block) */
-#define SCAN_REG_ADDR_BIT_L 2
-#define SCAN_REG_ADDR_BIT_H 6
-#define SCAN_REG_ADDR_WIDTH 5
-
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_REVISION */
-#define SAND_HAL_KA_SC_SCAN_REVISION_OFFSET    0x000
-#ifndef SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_REVISION_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_REVISION_MSB     31
-#define SAND_HAL_KA_SC_SCAN_REVISION_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_RESET */
-#define SAND_HAL_KA_SC_SCAN_RESET_OFFSET    0x004
-#ifndef SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_RESET_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_RESET_MSB     31
-#define SAND_HAL_KA_SC_SCAN_RESET_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_STATUS */
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFFSET    0x008
-#ifndef SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_STATUS_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_STATUS_MSB     31
-#define SAND_HAL_KA_SC_SCAN_STATUS_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_CNTL */
-#define SAND_HAL_KA_SC_SCAN_CNTL_OFFSET    0x01c
-#ifndef SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_CNTL_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_CNTL_MSB     31
-#define SAND_HAL_KA_SC_SCAN_CNTL_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_INFO */
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_OFFSET    0x020
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MSB     31
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_FROM_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_OFFSET    0x024
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_FROM_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_OFFSET    0x028
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_TO_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_OFFSET    0x02c
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_TO_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_OFFSET    0x030
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_CTRL */
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_OFFSET    0x034
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_PLL_CTRL */
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_OFFSET    0x038
-#ifndef SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MSB     31
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_CORE_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_OFFSET    0x03c
-#ifndef SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MSB     31
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_DR_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_OFFSET    0x040
-#ifndef SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MSB     31
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SPI_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_OFFSET    0x044
-#ifndef SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_OUT_DATA */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_OFFSET    0x048
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MSB     31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_OFFSET    0x04c
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MSB     31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_IN */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_OFFSET    0x050
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MSB     31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_MISC */
-#define SAND_HAL_KA_SC_SCAN_MISC_OFFSET    0x054
-#ifndef SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_MISC_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_MISC_MSB     31
-#define SAND_HAL_KA_SC_SCAN_MISC_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_INTERRUPT */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OFFSET    0x00c
-#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MSB     31
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_INTERRUPT_MASK */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OFFSET    0x010
-#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MSB     31
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCRATCH */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_OFFSET    0x014
-#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_LSB      0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCRATCH_MASK */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_OFFSET    0x018
-#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MSB     31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_LSB      0
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_REVISION */
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK    0x0000ff00
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MSB    15
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_LSB    8
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_DEFAULT    0x00000023
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK    0x000000ff
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MSB    7
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_LSB    0
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_RESET */
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK    0x00000200
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_SHIFT    9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MSB    9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_LSB    9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK    0x00000100
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MSB    8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_LSB    8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK    0x00000080
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_SHIFT    7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MSB    7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_LSB    7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK    0x00000040
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_SHIFT    6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MSB    6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_LSB    6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK    0x00000020
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_SHIFT    5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MSB    5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_LSB    5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK    0x00000010
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MSB    4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_LSB    4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK    0x00000008
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MSB    3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_LSB    3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MSB    1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_LSB    1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MSB    0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_LSB    0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_STATUS */
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MASK    0x00000040
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_SHIFT    6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MSB    6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_LSB    6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MASK    0x00000020
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_SHIFT    5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MSB    5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_LSB    5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MASK    0x00000010
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MSB    4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_LSB    4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MASK    0x00000008
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MSB    3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_LSB    3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MASK    0x00000004
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_SHIFT    2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MSB    2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_LSB    2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MSB    1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_LSB    1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MSB    0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_LSB    0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_CNTL */
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MASK    0x00000400
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_SHIFT    10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MSB    10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_LSB    10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MASK    0x00000200
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_SHIFT    9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MSB    9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_LSB    9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MASK    0x00000100
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MSB    8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_LSB    8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MASK    0x000000c0
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_SHIFT    6
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MSB    7
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_LSB    6
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK    0x00000030
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MSB    5
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_LSB    4
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MASK    0x0000000c
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_SHIFT    2
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MSB    3
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_LSB    2
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MASK    0x00000003
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MSB    1
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_LSB    0
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_INFO */
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK    0x0000f000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT    12
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MSB    15
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_LSB    12
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK    0x00000300
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MSB    9
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_LSB    8
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK    0x000000f0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MSB    7
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_LSB    4
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK    0x00000003
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MSB    1
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_LSB    0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_FROM_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_FROM_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_TO_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_TO_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_CTRL */
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MASK    0x04000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_SHIFT    26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MSB    26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_LSB    26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MASK    0x03000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_SHIFT    24
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MSB    25
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_LSB    24
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MASK    0x00100000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_SHIFT    20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MSB    20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_LSB    20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MASK    0x00080000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_SHIFT    19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MSB    19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_LSB    19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MASK    0x00040000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_SHIFT    18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MSB    18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_LSB    18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MASK    0x00020000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_SHIFT    17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MSB    17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_LSB    17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MASK    0x00010000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_SHIFT    16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MSB    16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_LSB    16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MASK    0x00001000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_SHIFT    12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MSB    12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_LSB    12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MASK    0x00000800
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SHIFT    11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MSB    11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_LSB    11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MASK    0x00000400
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SHIFT    10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MSB    10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_LSB    10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MASK    0x00000200
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SHIFT    9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MSB    9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_LSB    9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MASK    0x00000100
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MSB    8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_LSB    8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MASK    0x00000018
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MSB    4
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_LSB    3
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MASK    0x00000004
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_SHIFT    2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MSB    2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_LSB    2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MSB    1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_LSB    1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_PLL_CTRL */
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MASK    0x00002000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_SHIFT    13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MSB    13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_LSB    13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MASK    0x00001000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_SHIFT    12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MSB    12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_LSB    12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MASK    0x00000800
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_SHIFT    11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MSB    11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_LSB    11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MASK    0x00000400
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_SHIFT    10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MSB    10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_LSB    10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MASK    0x00000200
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_SHIFT    9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MSB    9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_LSB    9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MASK    0x00000100
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_SHIFT    8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MSB    8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_LSB    8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MASK    0x00000080
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_SHIFT    7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MSB    7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_LSB    7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MASK    0x00000040
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_SHIFT    6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MSB    6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_LSB    6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MASK    0x00000020
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_SHIFT    5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MSB    5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_LSB    5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MASK    0x00000010
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MSB    4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_LSB    4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MASK    0x00000008
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MSB    3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_LSB    3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MASK    0x00000007
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MSB    2
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_LSB    0
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_CORE_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MSB    23
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_DR_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MSB    23
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SPI_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MSB    23
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_OUT_DATA */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MASK    0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MSB    20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MASK    0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MSB    20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_LSB    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_IN */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MASK    0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MSB    20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_LSB    0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_MISC */
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MSB    1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_LSB    1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MSB    0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_LSB    0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_INTERRUPT */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MASK    0x00000010
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MSB    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_LSB    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MASK    0x00000008
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MSB    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_LSB    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MASK    0x00000004
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_SHIFT    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MSB    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_LSB    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MSB    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_LSB    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_DEFAULT    0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MSB    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_LSB    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_INTERRUPT_MASK */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK    0x00000010
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB    4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK    0x00000008
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB    3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK    0x00000004
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB    2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK    0x00000002
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB    1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK    0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT    0x00000001
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCRATCH */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCRATCH_MASK */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
-
-#endif /* matches #ifndef HAL_KA_SC_AUTO_H */
diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S
deleted file mode 100644
index b1d47a4c75..0000000000
--- a/board/sandburst/karef/init.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-*  Copyright (C) 2005 Sandburst Corporation
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-/*
- * Ported from Ebony init.S by Travis B. Sawyer
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbtab_end
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
deleted file mode 100644
index 2d71d3b2cc..0000000000
--- a/board/sandburst/karef/karef.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- *  Copyright (C) 2005 Sandburst Corporation
- *  Travis B. Sawyer
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include "karef.h"
-#include "karef_version.h"
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "../common/sb_common.h"
-#include "../common/ppc440gx_i2c.h"
-
-void fpga_init (void);
-
-KAREF_BOARD_ID_ST board_id_as[] =
-{
-	{"Undefined"},			     /* Not specified */
-	{"Kamino Reference Design"},
-	{"Reserved"},			     /* Reserved for future use */
-	{"Reserved"},			     /* Reserved for future use */
-};
-
-KAREF_BOARD_ID_ST ofem_board_id_as[] =
-{
-	{"Undefined"},
-	{"1x10 + 10x2"},
-	{"Reserved"},
-	{"Reserved"},
-};
-
-/*************************************************************************
- *  board_early_init_f
- *
- *  Setup chip selects, initialize the Opto-FPGA, initialize
- *  interrupt polarity and triggers.
- ************************************************************************/
-int board_early_init_f (void)
-{
-	ppc440_gpio_regs_t *gpio_regs;
-
-	/* Enable GPIO interrupts */
-	mtsdr(sdr_pfc0, 0x00103E00);
-
-	/* Setup access for LEDs, and system topology info */
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
-	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
-	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
-
-	/* Turn on all the leds for now */
-	gpio_regs->out = SBCOMMON_GPIO_LEDS;
-
-	/*--------------------------------------------------------------------+
-	  | Initialize EBC CONFIG
-	  +-------------------------------------------------------------------*/
-	mtebc(xbcfg,
-	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
-	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
-	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
-	      EBC_CFG_EMC_DEFAULT  | EBC_CFG_PME_DISABLE |
-	      EBC_CFG_PR_32);
-
-	/*--------------------------------------------------------------------+
-	  | 1/2 MB FLASH. Initialize bank 0 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb0ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-	/*--------------------------------------------------------------------+
-	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb1ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-
-	/*--------------------------------------------------------------------+
-	  | Compact Flash, uses 2 Chip Selects (2 & 6)
-	  +-------------------------------------------------------------------*/
-	mtebc(pb2ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
-	/*--------------------------------------------------------------------+
-	  | KaRef Scan FPGA. Initialize bank 3 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb5ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
-	  | Initialize bank 4 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb4ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
-	      EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	  | OFEM FPGA  Initialize bank 5 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb3ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-
-	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48400000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-
-	/*--------------------------------------------------------------------+
-	  | Compact Flash, uses 2 Chip Selects (2 & 6)
-	  +-------------------------------------------------------------------*/
-	mtebc(pb6ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
-	/*--------------------------------------------------------------------+
-	  | BME-32. Initialize bank 7 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb7ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 +-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000000);	/* all non- critical */
-	mtdcr (uic0pr, 0xfffffe03);	/* polarity */
-	mtdcr (uic0tr, 0x01c00000);	/* trigger edge vs level */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffc8ff);	/* polarity */
-	mtdcr (uic1tr, 0x00ff0000);	/* trigger edge vs level */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-	mtdcr (uic2er, 0x00000000);	/* disable all */
-	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic2pr, 0xffff83ff);	/* polarity */
-	mtdcr (uic2tr, 0x00ff8c0f);	/* trigger edge vs level */
-	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uicb0sr, 0xfc000000);	/* clear all */
-	mtdcr (uicb0er, 0x00000000);	/* disable all */
-	mtdcr (uicb0cr, 0x00000000);	/* all non-critical */
-	mtdcr (uicb0pr, 0xfc000000);
-	mtdcr (uicb0tr, 0x00000000);
-	mtdcr (uicb0vr, 0x00000001);
-
-	fpga_init();
-
-	return 0;
-}
-
-
-/*************************************************************************
- *  checkboard
- *
- *  Dump pertinent info to the console
- ************************************************************************/
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	unsigned char brd_rev, brd_id;
-	unsigned short sernum;
-	unsigned char scan_rev, scan_id, ofem_rev=0, ofem_id=0;
-	unsigned char ofem_brd_rev, ofem_brd_id;
-	KAREF_FPGA_REGS_ST *karef_ps;
-	OFEM_FPGA_REGS_ST *ofem_ps;
-
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-	ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
-
-	scan_id = (unsigned char)((karef_ps->revision_ul &
-				   SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
-				  >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT);
-
-	scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK)
-				   >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT);
-
-	brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK)
-				  >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT);
-
-	brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK)
-				 >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT);
-
-	ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
-				      >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
-
-	ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK)
-				       >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT);
-
-	if (0xF != ofem_brd_id) {
-		ofem_id = (unsigned char)((ofem_ps->revision_ul &
-					   SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK)
-					  >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT);
-
-		ofem_rev = (unsigned char)((ofem_ps->revision_ul &
-					    SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK)
-					   >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT);
-	}
-
-	get_sys_info (&sysinfo);
-
-	sernum = sbcommon_get_serial_number();
-
-	printf ("Board: Sandburst Corporation Kamino Reference Design "
-		"Serial Number: %d\n", sernum);
-	printf ("%s\n", KAREF_U_BOOT_REL_STR);
-
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
-	if (sbcommon_get_master()) {
-		printf("Slot 0 - Master\nSlave board");
-		if (sbcommon_secondary_present())
-			printf(" present\n");
-		else
-			printf(" not detected\n");
-	} else {
-		printf("Slot 1 - Slave\n\n");
-	}
-
-	printf ("ScanFPGA ID:\t0x%02X\tRev:  0x%02X\n", scan_id, scan_rev);
-	printf ("Board Rev:\t0x%02X\tID:   0x%02X\n", brd_rev, brd_id);
-	if(0xF != ofem_brd_id) {
-		printf("OFemFPGA ID:\t0x%02X\tRev:  0x%02X\n", ofem_id, ofem_rev);
-		printf("OFEM Board Rev:\t0x%02X\tID:   0x%02X\n", ofem_brd_id, ofem_brd_rev);
-	}
-
-	/* Fix the ack in the bme 32 */
-	udelay(5000);
-	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
-	asm("eieio");
-
-
-	return (0);
-}
-
-/*************************************************************************
- *  misc_init_f
- *
- *  Initialize I2C bus one to gain access to the fans
- ************************************************************************/
-int misc_init_f (void)
-{
-	/* Turn on i2c bus 1 */
-	puts ("I2C1:  ");
-	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	puts ("ready\n");
-
-	/* Turn on fans 3 & 4 */
-	sbcommon_fans();
-
-	return (0);
-}
-
-/*************************************************************************
- *  misc_init_r
- *
- *  Do nothing.
- ************************************************************************/
-int misc_init_r (void)
-{
-	unsigned short sernum;
-	char envstr[255];
-	KAREF_FPGA_REGS_ST *karef_ps;
-	OFEM_FPGA_REGS_ST *ofem_ps;
-
-	if(NULL != getenv("secondserial")) {
-		puts("secondserial is set, switching to second serial port\n");
-		setenv("stderr", "serial1");
-		setenv("stdout", "serial1");
-		setenv("stdin", "serial1");
-	}
-
-	setenv("ubrelver", KAREF_U_BOOT_REL_STR);
-
-	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
-	setenv("bldstr", envstr);
-	saveenv();
-
-	if( getenv("autorecover")) {
-		setenv("autorecover", NULL);
-		saveenv();
-		sernum = sbcommon_get_serial_number();
-
-		printf("\nSetting up environment for automatic filesystem recovery\n");
-		/*
-		 * Setup default bootargs
-		 */
-		memset(envstr, 0, 255);
-
-		sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
-			"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
-			sernum, sernum);
-		setenv("bootargs", envstr);
-
-		/*
-		 * Setup Default boot command
-		 */
-		setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
-		       "fatload ide 0 8100000 pramdisk;"
-		       "bootm 8000000 8100000");
-
-		printf("Done.  Please type allow the system to continue to boot\n");
-	}
-
-	if( getenv("fakeled")) {
-		karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
-		ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
-		karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
-		setenv("bootdelay", "-1");
-		saveenv();
-		printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
-	}
-
-	return (0);
-}
-
-/*************************************************************************
- *  ide_set_reset
- ************************************************************************/
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
-	KAREF_FPGA_REGS_ST *karef_ps;
-	/* TODO: ide reset */
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-
-	if (on) {
-		karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
-	} else {
-		karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
-	}
-}
-#endif /* CONFIG_IDE_RESET */
-
-/*************************************************************************
- *  fpga_init
- ************************************************************************/
-void fpga_init(void)
-{
-	KAREF_FPGA_REGS_ST *karef_ps;
-	OFEM_FPGA_REGS_ST *ofem_ps;
-	unsigned char ofem_id;
-	unsigned long tmp;
-
-	/* Ensure we have power all around */
-	udelay(500);
-
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-	tmp =
-		SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK |
-		SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK;
-
-	karef_ps->reset_ul = tmp;
-
-	/*
-	 * Wait a bit to allow the ofem fpga to get its brains
-	 */
-	udelay(5000);
-
-	/*
-	 * Check to see if the ofem is there
-	 */
-	ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
-				  >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
-	if(0xF != ofem_id) {
-		tmp =
-			SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK |
-			SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
-			SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
-
-		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
-		ofem_ps->reset_ul = tmp;
-
-		ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
-	}
-
-	karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT;
-
-	asm("eieio");
-
-	return;
-}
-
-int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short sernum;
-	char envstr[255];
-
-	sernum = sbcommon_get_serial_number();
-
-	memset(envstr, 0, 255);
-	/*
-	 * Setup our ip address
-	 */
-	sprintf(envstr, "10.100.70.%d", sernum);
-
-	setenv("ipaddr", envstr);
-	/*
-	 * Setup the host ip address
-	 */
-	setenv("serverip", "10.100.17.10");
-
-	/*
-	 * Setup default bootargs
-	 */
-	memset(envstr, 0, 255);
-
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
-		"rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d "
-		"nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:"
-		"255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33",
-		sernum, sernum, sernum);
-
-	setenv("bootargs_nfs", envstr);
-	setenv("bootargs", envstr);
-
-	/*
-	 * Setup CF bootargs
-	 */
-	memset(envstr, 0, 255);
-
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
-		"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
-		sernum, sernum);
-
-	setenv("bootargs_cf", envstr);
-
-	/*
-	 * Setup Default boot command
-	 */
-	setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000");
-	setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000");
-
-	/*
-	 * Setup compact flash boot command
-	 */
-	setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000");
-
-	saveenv();
-
-	return(1);
-}
-
-int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short sernum;
-	char envstr[255];
-
-	sernum = sbcommon_get_serial_number();
-
-	printf("\nSetting up environment for filesystem recovery\n");
-	/*
-	 * Setup default bootargs
-	 */
-	memset(envstr, 0, 255);
-
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
-		"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none",
-		sernum, sernum);
-	setenv("bootargs", envstr);
-
-	/*
-	 * Setup Default boot command
-	 */
-
-	setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
-	       "fatload ide 0 8100000 pramdisk;"
-	       "bootm 8000000 8100000");
-
-	printf("Done.  Please type boot<cr>.\nWhen the kernel has booted"
-	       " please type fsrecover.sh<cr>\n");
-
-	return(1);
-}
-
-U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
-	   "kasetup - Set environment to factory defaults\n", NULL);
-
-U_BOOT_CMD(karecover, 1, 1, karefRecover,
-	   "karecover - Set environment to allow for fs recovery\n", NULL);
diff --git a/board/sandburst/karef/karef.h b/board/sandburst/karef/karef.h
deleted file mode 100644
index 5de7cb5130..0000000000
--- a/board/sandburst/karef/karef.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef __KAREF_H__
-#define __KAREF_H__
-/*
- * (C) Copyright 2005
- * Sandburst Corporation
- * Travis B. Sawyer
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Ka Reference Design OFEM FPGA Registers & definitions */
-#include "hal_ka_sc_auto.h"
-#include "hal_ka_of_auto.h"
-
-typedef struct karef_board_id_s {
-	const char name[40];
-} KAREF_BOARD_ID_ST, *KAREF_BOARD_ID_PST;
-
-/* SCAN FPGA */
-typedef struct karef_fpga_regs_s
-{
-    volatile unsigned long revision_ul;       /* Read Only  */
-    volatile unsigned long reset_ul;          /* Read/Write */
-    volatile unsigned long interrupt_ul;      /* Read Only  */
-    volatile unsigned long mask_ul;           /* Read/Write */
-    volatile unsigned long scratch_ul;        /* Read/Write */
-    volatile unsigned long scrmask_ul;        /* Read/Write */
-    volatile unsigned long status_ul;         /* Read Only  */
-    volatile unsigned long control_ul;        /* Read/Write */
-    volatile unsigned long boardinfo_ul;      /* Read Only  */
-    volatile unsigned long scan_from0_ul;     /* Read Only  */
-    volatile unsigned long scan_from1_ul;     /* Read Only  */
-    volatile unsigned long scan_to0_ul;       /* Read/Write */
-    volatile unsigned long scan_to1_ul;       /* Read/Write */
-    volatile unsigned long scan_control_ul;   /* Read/Write */
-    volatile unsigned long pll_control_ul;    /* Read/Write */
-    volatile unsigned long core_clock_cnt_ul; /* Read/Write */
-    volatile unsigned long dr_clock_cnt_ul;   /* Read/Write */
-    volatile unsigned long spi_clock_cnt_ul;  /* Read/Write */
-    volatile unsigned long brdout_data_ul;    /* Read/Write */
-    volatile unsigned long brdout_enable_ul;  /* Read/Write */
-    volatile unsigned long brdin_data_ul;     /* Read Only  */
-    volatile unsigned long misc_ul;           /* Read/Write */
-} __attribute__((packed)) KAREF_FPGA_REGS_ST , * KAREF_FPGA_REGS_PST;
-
-/* OFEM FPGA */
-typedef struct ofem_fpga_regs_s
-{
-    volatile unsigned long revision_ul;       /* Read Only  */
-    volatile unsigned long reset_ul;          /* Read/Write */
-    volatile unsigned long interrupt_ul;      /* Read Only  */
-    volatile unsigned long mask_ul;           /* Read/Write */
-    volatile unsigned long scratch_ul;        /* Read/Write */
-    volatile unsigned long scrmask_ul;        /* Read/Write */
-    volatile unsigned long control_ul;        /* Read/Write */
-    volatile unsigned long mac_flow_ctrl_ul;  /* Read/Write */
-} __attribute__((packed)) OFEM_FPGA_REGS_ST , * OFEM_FPGA_REGS_PST;
-
-
-#endif /* __KAREF_H__ */
diff --git a/board/sandburst/karef/karef_version.h b/board/sandburst/karef/karef_version.h
deleted file mode 100644
index 9960b9a717..0000000000
--- a/board/sandburst/karef/karef_version.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _KAREF_VERSION_H_
-#define _KAREF_VERSION_H_
-/*
- *  Copyright (C) 2005 Sandburst Corporation
- *  Travis B. Sawyer
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#define KAREF_U_BOOT_REL_STR "Release 0.0.7"
-#endif
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
deleted file mode 100644
index 9e9e99045f..0000000000
--- a/board/sandburst/karef/u-boot.lds
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/sandburst/karef/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
deleted file mode 100644
index 47d80fae1b..0000000000
--- a/board/sandburst/karef/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/sandburst/karef/init.o (.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
deleted file mode 100644
index c143e5e8ca..0000000000
--- a/board/sandburst/metrobox/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2005
-# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-# TBS: add for debugging purposes
-BUILDUSER := $(shell whoami)
-FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
-
-CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
-# TBS: end debugging
-
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
-	../common/sb_common.o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend *~
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk
deleted file mode 100644
index 91aee2fc7d..0000000000
--- a/board/sandburst/metrobox/config.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# (C) Copyright 2005
-# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFF80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/sandburst/metrobox/hal_xc_auto.h b/board/sandburst/metrobox/hal_xc_auto.h
deleted file mode 100644
index c99b38ca06..0000000000
--- a/board/sandburst/metrobox/hal_xc_auto.h
+++ /dev/null
@@ -1,553 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip xc
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_XC_AUTO_H
-#define HAL_XC_AUTO_H
-
-/* ----------------------------------------------------------------
- * For block: 'xcvr_cntl'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define XCVR_CNTL_BLOCK_ADDR_BIT_L 6
-#define XCVR_CNTL_BLOCK_ADDR_BIT_H 9
-#define XCVR_CNTL_BLOCK_ADDR_WIDTH 4
-
-#define  XCVR_CNTL_ADDR  0x0
-
-/* ---- Reg addressing (within block) */
-#define XCVR_CNTL_REG_ADDR_BIT_L 2
-#define XCVR_CNTL_REG_ADDR_BIT_H 5
-#define XCVR_CNTL_REG_ADDR_WIDTH 4
-
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_REVISION */
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_OFFSET    0x000
-#ifndef SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_RESET */
-#define SAND_HAL_XC_XCVR_CNTL_RESET_OFFSET    0x004
-#ifndef SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_STATUS */
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_OFFSET    0x008
-#ifndef SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_CNTL */
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OFFSET    0x01c
-#ifndef SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_BRD_INFO */
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_OFFSET    0x020
-#ifndef SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_MAC_FLOW_CTL */
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_OFFSET    0x024
-#ifndef SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_INTERRUPT */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OFFSET    0x00c
-#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_INTERRUPT_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OFFSET    0x010
-#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_SCRATCH */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_OFFSET    0x014
-#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_LSB      0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_SCRATCH_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_OFFSET    0x018
-#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK    0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MSB     31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_LSB      0
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_REVISION */
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK    0x0000ff00
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MSB    15
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK    0x000000ff
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_RESET */
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK    0x00020000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_SHIFT    17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MSB    17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_LSB    17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK    0x00010000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_SHIFT    16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MSB    16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_LSB    16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK    0x00008000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_SHIFT    15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MSB    15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_LSB    15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK    0x00004000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_SHIFT    14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MSB    14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_LSB    14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK    0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_SHIFT    13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MSB    13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_LSB    13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK    0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_SHIFT    12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MSB    12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_LSB    12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK    0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_SHIFT    11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MSB    11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_LSB    11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK    0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_SHIFT    10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MSB    10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_LSB    10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK    0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_SHIFT    9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MSB    9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_LSB    9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK    0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MSB    8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK    0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_SHIFT    7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_LSB    7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK    0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_SHIFT    6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MSB    6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_LSB    6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK    0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_SHIFT    5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MSB    5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_LSB    5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK    0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MSB    4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK    0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_SHIFT    3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MSB    3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_LSB    3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK    0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_SHIFT    2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MSB    2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_LSB    2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK    0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_SHIFT    1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_LSB    1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MSB    0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_STATUS */
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MASK    0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_SHIFT    2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MSB    2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_LSB    2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MASK    0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_SHIFT    1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_LSB    1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MASK    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MSB    0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_CNTL */
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MASK    0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_SHIFT    10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MSB    10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_LSB    10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MASK    0x00000300
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MSB    9
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK    0x000000c0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT    6
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_LSB    6
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MASK    0x00000030
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MSB    5
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MASK    0x0000000c
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_SHIFT    2
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MSB    3
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_LSB    2
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MASK    0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_SHIFT    1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_LSB    1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MASK    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MSB    0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_DEFAULT    0x00000001
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_BRD_INFO */
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK    0x000000f0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK    0x00000003
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_MAC_FLOW_CTL */
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MASK    0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_SHIFT    12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MSB    12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_LSB    12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MASK    0x00000f00
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MSB    11
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK    0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB    4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK    0x0000000f
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB    3
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_INTERRUPT */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MASK    0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_SHIFT    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MSB    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_LSB    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MASK    0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_SHIFT    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MSB    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_LSB    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MASK    0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_SHIFT    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MSB    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_LSB    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MASK    0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_SHIFT    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MSB    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_LSB    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MASK    0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_SHIFT    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MSB    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_LSB    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MASK    0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MSB    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MASK    0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_SHIFT    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_LSB    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MASK    0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_SHIFT    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MSB    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_LSB    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MASK    0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_SHIFT    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MSB    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_LSB    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MASK    0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MSB    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MASK    0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_SHIFT    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MSB    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_LSB    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MASK    0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_SHIFT    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MSB    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_LSB    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MASK    0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_SHIFT    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_LSB    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_DEFAULT    0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MASK    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MSB    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_INTERRUPT_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK    0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB    13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK    0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB    12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK    0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB    11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK    0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB    10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK    0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB    9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK    0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB    8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK    0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB    7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK    0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB    6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK    0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB    5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK    0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB    4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK    0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB    3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK    0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB    2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK    0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB    1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK    0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT    0x00000001
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_SCRATCH */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MSB    31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_DEFAULT    0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_SCRATCH_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
-
-#endif /* matches #ifndef HAL_XC_AUTO_H */
diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S
deleted file mode 100644
index e398f0008d..0000000000
--- a/board/sandburst/metrobox/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-*  Copyright (C) 2005
-*  Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbtab_end
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
deleted file mode 100644
index 86d259fac4..0000000000
--- a/board/sandburst/metrobox/metrobox.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- *  Copyright (c) 2005
- *  Travis B. Sawyer,  Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include "metrobox.h"
-#include "metrobox_version.h"
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "../common/ppc440gx_i2c.h"
-#include "../common/sb_common.h"
-
-void fpga_init (void);
-
-METROBOX_BOARD_ID_ST board_id_as[] =
-{	{"Undefined"},			    /* Not specified */
-	{"2x10Gb"},			    /* 2 ports, 10 GbE */
-	{"20x1Gb"},			    /* 20 ports, 1 GbE */
-	{"Reserved"},			     /* Reserved for future use */
-};
-
-/*************************************************************************
- *  board_early_init_f
- *
- *  Setup chip selects, initialize the Opto-FPGA, initialize
- *  interrupt polarity and triggers.
- ************************************************************************/
-int board_early_init_f (void)
-{
-	ppc440_gpio_regs_t *gpio_regs;
-
-	/* Enable GPIO interrupts */
-	mtsdr(sdr_pfc0, 0x00103E00);
-
-	/* Setup access for LEDs, and system topology info */
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
-	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
-	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
-
-	/* Turn on all the leds for now */
-	gpio_regs->out = SBCOMMON_GPIO_LEDS;
-
-	/*--------------------------------------------------------------------+
-	  | Initialize EBC CONFIG
-	  +-------------------------------------------------------------------*/
-	mtebc(xbcfg,
-	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
-	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
-	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
-	      EBC_CFG_EMC_DEFAULT  | EBC_CFG_PME_DISABLE |
-	      EBC_CFG_PR_32);
-
-	/*--------------------------------------------------------------------+
-	  | 1/2 MB FLASH. Initialize bank 0 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb0ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-	/*--------------------------------------------------------------------+
-	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb1ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-
-	/*--------------------------------------------------------------------+
-	  | Compact Flash, uses 2 Chip Selects (2 & 6)
-	  +-------------------------------------------------------------------*/
-	mtebc(pb2ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
-	/*--------------------------------------------------------------------+
-	  | OPTO & OFEM FPGA. Initialize bank 3 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb3ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	  | MAC A for metrobox
-	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
-	  | Initialize bank 4 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb4ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	  | Metrobox MAC B  Initialize bank 5 with default values.
-	  | KA REF FPGA	 Initialize bank 5 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb5ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	  | Compact Flash, uses 2 Chip Selects (2 & 6)
-	  +-------------------------------------------------------------------*/
-	mtebc(pb6ap,
-	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
-	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
-	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
-	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
-	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
-	      EBC_BXAP_PEN_DISABLED);
-
-	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
-	/*--------------------------------------------------------------------+
-	  | BME-32. Initialize bank 7 with default values.
-	  +-------------------------------------------------------------------*/
-	mtebc(pb7ap,
-	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
-	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
-	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
-	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
-	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
-	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-	/*--------------------------------------------------------------------+
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 +-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000000);	/* all non- critical */
-	mtdcr (uic0pr, 0xfffffe03);	/* polarity */
-	mtdcr (uic0tr, 0x01c00000);	/* trigger edge vs level */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffc8ff);	/* polarity */
-	mtdcr (uic1tr, 0x00ff0000);	/* trigger edge vs level */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-	mtdcr (uic2er, 0x00000000);	/* disable all */
-	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic2pr, 0xffff83ff);	/* polarity */
-	mtdcr (uic2tr, 0x00ff8c0f);	/* trigger edge vs level */
-	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uicb0sr, 0xfc000000);	/* clear all */
-	mtdcr (uicb0er, 0x00000000);	/* disable all */
-	mtdcr (uicb0cr, 0x00000000);	/* all non-critical */
-	mtdcr (uicb0pr, 0xfc000000);
-	mtdcr (uicb0tr, 0x00000000);
-	mtdcr (uicb0vr, 0x00000001);
-
-	fpga_init();
-
-	return 0;
-}
-
-/*************************************************************************
- *  checkboard
- *
- *  Dump pertinent info to the console
- ************************************************************************/
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	unsigned char brd_rev, brd_id;
-	unsigned short sernum;
-	unsigned char opto_rev, opto_id;
-	OPTO_FPGA_REGS_ST *opto_ps;
-
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
-
-	opto_rev = (unsigned char)((opto_ps->revision_ul &
-				    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
-				   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
-
-	opto_id = (unsigned char)((opto_ps->revision_ul &
-				   SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK)
-				  >> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT);
-
-	brd_rev = (unsigned char)((opto_ps->boardinfo_ul &
-				   SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK)
-				  >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT);
-
-	brd_id = (unsigned char)((opto_ps->boardinfo_ul &
-				  SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK)
-				 >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT);
-
-	get_sys_info (&sysinfo);
-
-	sernum = sbcommon_get_serial_number();
-	printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
-	printf ("%s\n", METROBOX_U_BOOT_REL_STR);
-
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
-	if (sbcommon_get_master()) {
-		printf("Slot 0 - Master\nSlave board");
-		if (sbcommon_secondary_present())
-			printf(" present\n");
-		else
-			printf(" not detected\n");
-	} else {
-		printf("Slot 1 - Slave\n\n");
-	}
-
-	printf ("OptoFPGA ID:\t0x%02X\tRev:  0x%02X\n", opto_id, opto_rev);
-	printf ("Board Rev:\t0x%02X\tID:  %s\n", brd_rev, board_id_as[brd_id]);
-
-	/* Fix the ack in the bme 32 */
-	udelay(5000);
-	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
-	asm("eieio");
-
-
-	return (0);
-}
-
-/*************************************************************************
- *  misc_init_f
- *
- *  Initialize I2C bus one to gain access to the fans
- ************************************************************************/
-int misc_init_f (void)
-{
-	/* Turn on i2c bus 1 */
-	puts ("I2C1:  ");
-	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	puts ("ready\n");
-
-	/* Turn on fans */
-	sbcommon_fans();
-
-	return (0);
-}
-
-/*************************************************************************
- *  misc_init_r
- *
- *  Do nothing.
- ************************************************************************/
-int misc_init_r (void)
-{
-	unsigned short sernum;
-	char envstr[255];
-	unsigned char opto_rev;
-	OPTO_FPGA_REGS_ST *opto_ps;
-
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
-
-	if(NULL != getenv("secondserial")) {
-	    puts("secondserial is set, switching to second serial port\n");
-	    setenv("stderr", "serial1");
-	    setenv("stdout", "serial1");
-	    setenv("stdin", "serial1");
-	}
-
-	setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
-
-	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
-	setenv("bldstr", envstr);
-	saveenv();
-
-	if( getenv("autorecover")) {
-		setenv("autorecover", NULL);
-		saveenv();
-		sernum = sbcommon_get_serial_number();
-
-		printf("\nSetting up environment for automatic filesystem recovery\n");
-		/*
-		 * Setup default bootargs
-		 */
-		memset(envstr, 0, 255);
-		sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
-			"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
-			sernum, sernum);
-		setenv("bootargs", envstr);
-
-		/*
-		 * Setup Default boot command
-		 */
-		setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
-		       "fatload ide 0 8100000 pramdisk;"
-		       "bootm 8000000 8100000");
-
-		printf("Done.  Please type allow the system to continue to boot\n");
-	}
-
-	if( getenv("fakeled")) {
-		setenv("bootdelay", "-1");
-		saveenv();
-		printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
-		opto_rev = (unsigned char)((opto_ps->revision_ul &
-					    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
-					   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
-
-		if(0x12 <= opto_rev) {
-			opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK;
-		}
-	}
-
-	return (0);
-}
-
-/*************************************************************************
- *  ide_set_reset
- ************************************************************************/
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
-	OPTO_FPGA_REGS_ST *opto_ps;
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
-
-	if (on) {		/* assert RESET */
-	    opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
-	} else {		/* release RESET */
-	    opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
-	}
-}
-#endif /* CONFIG_IDE_RESET */
-
-/*************************************************************************
- *  fpga_init
- ************************************************************************/
-void fpga_init(void)
-{
-	OPTO_FPGA_REGS_ST *opto_ps;
-	unsigned char opto_rev;
-	unsigned long tmp;
-
-	/* Ensure we have power all around */
-	udelay(500);
-
-	/*
-	 * Take appropriate hw bits out of reset
-	 */
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
-
-	tmp =
-	    SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK |
-	    SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK;
-	opto_ps->reset_ul = tmp;
-	/*
-	 * Turn on the 'Slow Blink' for the System Error Led.
-	 * Ensure FPGA rev is up to at least rev 0x12
-	 */
-	opto_rev = (unsigned char)((opto_ps->revision_ul &
-				    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
-				   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
-	if(0x12 <= opto_rev) {
-	    opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT;
-	}
-
-	asm("eieio");
-
-	return;
-}
-
-int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short sernum;
-	char envstr[255];
-
-	sernum = sbcommon_get_serial_number();
-
-	memset(envstr, 0, 255);
-	/*
-	 * Setup our ip address
-	 */
-	sprintf(envstr, "10.100.60.%d", sernum);
-
-	setenv("ipaddr", envstr);
-	/*
-	 * Setup the host ip address
-	 */
-	setenv("serverip", "10.100.17.10");
-
-	/*
-	 * Setup default bootargs
-	 */
-	memset(envstr, 0, 255);
-
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
-		"rw nfsroot=10.100.17.10:/home/metrobox/mbc%d "
-		"nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1"
-		":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33",
-		sernum, sernum, sernum);
-
-	setenv("bootargs_nfs", envstr);
-	setenv("bootargs", envstr);
-
-	/*
-	 * Setup CF bootargs
-	 */
-	memset(envstr, 0, 255);
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
-		"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
-		sernum, sernum);
-
-	setenv("bootargs_cf", envstr);
-
-	/*
-	 * Setup Default boot command
-	 */
-	setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000");
-	setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000");
-
-	/*
-	 * Setup compact flash boot command
-	 */
-	setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000");
-
-	saveenv();
-
-
-	return(1);
-}
-
-int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short sernum;
-	char envstr[255];
-
-	sernum = sbcommon_get_serial_number();
-
-	printf("\nSetting up environment for filesystem recovery\n");
-	/*
-	 * Setup default bootargs
-	 */
-	memset(envstr, 0, 255);
-	sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
-		"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none",
-		sernum, sernum);
-
-	setenv("bootargs", envstr);
-
-	/*
-	 * Setup Default boot command
-	 */
-	setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
-	       "fatload ide 0 8100000 pramdisk;"
-	       "bootm 8000000 8100000");
-
-	printf("Done.  Please type boot<cr>.\nWhen the kernel has booted"
-	       " please type fsrecover.sh<cr>\n");
-
-	return(1);
-}
-
-U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
-	   "mbsetup - Set environment to factory defaults\n", NULL);
-
-U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
-	   "mbrecover - Set environment to allow for fs recovery\n", NULL);
diff --git a/board/sandburst/metrobox/metrobox.h b/board/sandburst/metrobox/metrobox.h
deleted file mode 100644
index 3f28f00442..0000000000
--- a/board/sandburst/metrobox/metrobox.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __METROBOX_H__
-#define __METROBOX_H__
-/*
- * (C) Copyright 2005
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-typedef struct metrobox_board_id_s {
-	const char name[40];
-} METROBOX_BOARD_ID_ST, *METROBOX_BOARD_ID_PST;
-
-
-/* Metrobox Opto-FPGA registers and definitions */
-#include "hal_xc_auto.h"
-typedef struct opto_fpga_regs_s {
-	volatile unsigned long revision_ul;	/* Read Only  */
-	volatile unsigned long reset_ul;	/* Read/Write */
-	volatile unsigned long status_ul;	/* Read Only  */
-	volatile unsigned long interrupt_ul;	/* Read Only  */
-	volatile unsigned long mask_ul;	/* Read/Write */
-	volatile unsigned long scratch_ul;	/* Read/Write */
-	volatile unsigned long scrmask_ul;	/* Read/Write */
-	volatile unsigned long control_ul;	/* Read/Write */
-	volatile unsigned long boardinfo_ul;	/* Read Only  */
-} __attribute__ ((packed)) OPTO_FPGA_REGS_ST , *OPTO_FPGA_REGS_PST;
-
-#endif /* __METROBOX_H__ */
diff --git a/board/sandburst/metrobox/metrobox_version.h b/board/sandburst/metrobox/metrobox_version.h
deleted file mode 100644
index 1b6fee5d8a..0000000000
--- a/board/sandburst/metrobox/metrobox_version.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _METROBOX_VERSION_H_
-#define _METROBOX_VERSION_H_
-/*
- * (C) Copyright 2005
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#define METROBOX_U_BOOT_REL_STR "Release 2.0.3"
-
-#endif
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
deleted file mode 100644
index a17401af92..0000000000
--- a/board/sandburst/metrobox/u-boot.lds
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/sandburst/metrobox/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
deleted file mode 100644
index fef4c4220c..0000000000
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/sandburst/metrobox/init.o (.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/sbc8560/Makefile b/board/sbc8560/Makefile
deleted file mode 100644
index 15965252f3..0000000000
--- a/board/sbc8560/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-# Added support for Wind River SBC8560 board
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sbc8560/config.mk b/board/sbc8560/config.mk
deleted file mode 100644
index 6d9ae45126..0000000000
--- a/board/sbc8560/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,2003 Motorola Inc.
-#
-# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-# Added support for Wind River SBC8560 board
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# based on mpc8560ads board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 256K
-#
-TEXT_BASE = 0xfffc0000
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/sbc8560/init.S b/board/sbc8560/init.S
deleted file mode 100644
index 3d8d180d84..0000000000
--- a/board/sbc8560/init.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
-* Copyright (C) 2002,2003, Motorola Inc.
-* Xianghua Xiao <X.Xiao@motorola.com>
-*
-* (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-* Added support for Wind River SBC8560 board
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(512M) -or- larger
- * c000_0000-cfff_ffff: PCI(256M)
- * d000_0000-dfff_ffff: RapidIO(256M)
- * e000_0000-ffff_ffff: localbus(512M)
- *   e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6
- *   e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1
- *   e800_0000-efff_ffff: LBC 128M, nothing here
- *   f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3
- *   f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4
- *   f800_0000-fdff_ffff: LBC 64M, nothing here
- *   fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5
- *   fd00_0000-fdff_ffff: LBC 16M, nothing here
- *   fe00_0000-feff_ffff: LBC 16M, nothing here
- *   ff00_0000-ff6f_ffff: LBC 7M, nothing here
- *   ff70_0000-ff7f_ffff: CCSRBAR 1M
- *   ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- *       Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-  #define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-  #define LAWAR0  (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#else
-  #define LAWBAR0 0
-  #define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1  (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR2 ((0xe0000000>>12) & 0xfffff)
-#define LAWAR2  (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-	.section .bootpg, "ax"
-	.globl  law_entry
-law_entry:
-	entry_start
-	.long 0x03
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
-	entry_end
-
-/* TLB1 entries configuration: */
-
-	.section	.bootpg, "ax"
-	.globl		tlb1_entry
-
-tlb1_entry:
-	entry_start
-
-	.long 0x08	/* the following data table uses a few of 16 TLB entries */
-
-/* TLB for CCSRBAR (IMMR) */
-
-	.long TLB1_MAS0(1,1,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-/* TLB for Local Bus stuff, just map the whole 512M */
-/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
-
-	.long TLB1_MAS0(1,2,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((0xe0000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((0xe0000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1,3,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((0xf0000000>>12)&0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((0xf0000000>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-#if !defined(CONFIG_SPD_EEPROM)
-	.long TLB1_MAS0(1,4,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1,5,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-#else
-	.long TLB1_MAS0(1,4,0)
-	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1,5,0)
-	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-#endif
-
-	.long TLB1_MAS0(1,6,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
-#ifdef CONFIG_L2_INIT_RAM
-	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
-#else
-	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
-#endif
-	.long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(1,7,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	.long TLB1_MAS0(1,15,0)
-	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-#else
-	.long TLB1_MAS0(1,15,0)
-	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-#endif
-	entry_end
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
deleted file mode 100644
index 44c84935d0..0000000000
--- a/board/sbc8560/sbc8560.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-extern long int spd_sdram (void);
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <miiphy.h>
-
-long int fixed_sdram (void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 RTS */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* SCC2 RxD */
-	/* PD27 */ {   1,   1,   1,   1,   0,   0   }, /* SCC2 TxD */
-	/* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* SCC2 RTS */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
-
-    pci->peer &= 0xfffffffdf; /* disable master abort */
-#endif
-	return 0;
-}
-
-void reset_phy (void)
-{
-#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR;
-#endif
-	/* reset Giga bit Ethernet port if needed here */
-
-	/* reset the CPM FEC port */
-#if (CONFIG_ETHER_INDEX == 2)
-	bcsr[0] &= ~0x20;
-	udelay(2);
-	bcsr[0] |= 0x20;
-	udelay(1000);
-#elif (CONFIG_ETHER_INDEX == 3)
-	bcsr[0] &= ~0x10;
-	udelay(2);
-	bcsr[0] |= 0x10;
-	udelay(1000);
-#endif
-#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	/* reset PHY */
-	miiphy_reset("FCC1 ETHERNET", 0x0);
-
-	/* change PHY address to 0x02 */
-	bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
-
-	bb_miiphy_write(NULL, 0x02, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-#endif /* CONFIG_MII */
-}
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-
-	get_sys_info (&sysinfo);
-
-#ifdef CONFIG_SBC8560
-	printf ("Board: Wind River SBC8560 Board\n");
-#else
-	printf ("Board: Wind River SBC8540 Board\n");
-#endif
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
-	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
-	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
-		|| (CFG_LBC_LCRR & 0x0f) == 8) {
-		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
-	} else {
-		printf("\tLBC: unknown\n");
-	}
-	printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
-	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
-	return (0);
-}
-
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur= &immap->im_gur;
-#endif
-#if defined(CONFIG_DDR_DLL)
-	uint temp_ddrdll = 0;
-
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		uint *p = 0;
-		uint i = 0;
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-		dma_init();
-		for (*p = 0; p < (uint *)(8 * 1024); p++) {
-			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
-			*p = (unsigned int)0xdeadbeef;
-			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
-		}
-
-		/* 8K */
-		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
-		/* 16K */
-		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
-		/* 32K */
-		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
-		/* 64K */
-		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
-		/* 128k */
-		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
-		/* 256k */
-		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
-		/* 512k */
-		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
-		/* 1M */
-		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
-		/* 2M */
-		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
-		/* 4M */
-		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
-
-		for (i = 1; i < dram_size / 0x800000; i++) {
-			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
-		}
-
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	return dram_size;
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-
-#define CFG_DDR_CONTROL 0xc2000000
-
-  #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-
-	ddr->cs0_bnds		= 0x00000007;
-	ddr->cs1_bnds		= 0x0010001f;
-	ddr->cs2_bnds		= 0x00000000;
-	ddr->cs3_bnds		= 0x00000000;
-	ddr->cs0_config		= 0x80000102;
-	ddr->cs1_config		= 0x80000102;
-	ddr->cs2_config		= 0x00000000;
-	ddr->cs3_config		= 0x00000000;
-	ddr->timing_cfg_1	= 0x37334321;
-	ddr->timing_cfg_2	= 0x00000800;
-	ddr->sdram_cfg		= 0x42000000;
-	ddr->sdram_mode		= 0x00000022;
-	ddr->sdram_interval	= 0x05200100;
-	ddr->err_sbe		= 0x00ff0000;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds
deleted file mode 100644
index 048ac26b4b..0000000000
--- a/board/sbc8560/u-boot.lds
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2002,2003,Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/sbc8560/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/sbc8560/init.o (.text)
-    cpu/mpc85xx/commproc.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/serial_scc.o (.text)
-    cpu/mpc85xx/ether_fcc.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/spd_sdram.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/shannon/inferno.header b/board/shannon/inferno.header
deleted file mode 100644
index 28ee85afd1..0000000000
--- a/board/shannon/inferno.header
+++ /dev/null
diff --git a/board/siemens/common/README b/board/siemens/common/README
deleted file mode 100644
index 7f1c8cd62d..0000000000
--- a/board/siemens/common/README
+++ /dev/null
@@ -1,27 +0,0 @@
-CCM/SCM-Ergaenzungen fuer U-Boot und Linux:
--------------------------------------------
-
-Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs:
-
-  => help fpga
-  fpga fpga status [name] - print FPGA status
-  fpga reset  [name] - reset FPGA
-  fpga load [name] addr - load FPGA configuration data
-
-Der Name kann beim CCM-Module auch weggelassen werden.
-Die Laengenangabe und damit "puma_len" ist nicht mehr
-noetig:
-
-  => fpga load puma 40600000
-  FPGA load PUMA: addr 40600000: (00000005)... done
-
-Die MTD-Partitionierung kann nun mittels "bootargs" ueber-
-geben werden:
-
-  => printenv addmtd
-  addmtd=setenv bootargs ${bootargs}
-    mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2)
-
-Die Portierung auf SMC ist natuerlich noch nicht getestet.
-
-Wolfgang Grandegger (04.06.2002)
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
deleted file mode 100644
index e9941cda61..0000000000
--- a/board/siemens/common/fpga.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <common.h>
-
-#include "fpga.h"
-
-int  power_on_reset(void);
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-
-static int fpga_get_version(fpga_t* fpga, char* name)
-{
-    char vname[12];
-    /*
-     * Net-list string format:
-     *     "vvvvvvvvddddddddn...".
-     *     Version Date    Name
-     *     "0000000322042002PUMA" = PUMA version 3 from 22.04.2002.
-     */
-    if (strlen(name) < (16 + strlen(fpga->name)))
-	goto failure;
-    /* Check FPGA name */
-    if (strcmp(&name[16], fpga->name) != 0)
-	goto failure;
-    /* Get version number */
-    memcpy(vname, name, 8);
-    vname[8] = '\0';
-    return simple_strtoul(vname, NULL, 16);
-
- failure:
-    printf("Image name %s is invalid\n", name);
-    return -1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static fpga_t* fpga_get(char* fpga_name)
-{
-    char name[FPGA_NAME_LEN];
-    int i;
-
-    if (strlen(fpga_name) >= FPGA_NAME_LEN)
-	goto failure;
-    for (i = 0; i < strlen(fpga_name); i++)
-	name[i] = toupper(fpga_name[i]);
-    name[i] = '\0';
-    for (i = 0; i < fpga_count; i++) {
-	if (strcmp(name, fpga_list[i].name) == 0)
-	    return &fpga_list[i];
-    }
- failure:
-    printf("FPGA: name %s is invalid\n", fpga_name);
-    return NULL;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static void fpga_status (fpga_t* fpga)
-{
-    /* Check state */
-    if (fpga_control(fpga, FPGA_DONE_IS_HIGH))
-	printf ("%s is loaded (%08lx)\n",
-		fpga->name, fpga_control(fpga, FPGA_GET_ID));
-    else
-	printf ("%s is NOT loaded\n", fpga->name);
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_reset (fpga_t* fpga)
-{
-    int i;
-
-    /* Set PROG to low and wait til INIT goes low */
-    fpga_control(fpga, FPGA_PROG_SET_LOW);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (!fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    /* Set PROG to high and wait til INIT goes high */
-    fpga_control(fpga, FPGA_PROG_SET_HIGH);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    return 0;
- failure:
-    return 1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
-{
-    volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base;
-    image_header_t hdr;
-    ulong len, checksum;
-    uchar *data = (uchar *)&hdr;
-    char *s, msg[32];
-    int verify, i;
-
-    /*
-     * Check the image header and data of the net-list
-     */
-    memcpy (&hdr, (char *)addr, sizeof(image_header_t));
-
-    if (hdr.ih_magic != IH_MAGIC) {
-	strcpy (msg, "Bad Image Magic Number");
-	goto failure;
-    }
-
-    len  = sizeof(image_header_t);
-
-    checksum = hdr.ih_hcrc;
-    hdr.ih_hcrc = 0;
-
-    if (crc32 (0, data, len) != checksum) {
-	strcpy (msg, "Bad Image Header CRC");
-	goto failure;
-    }
-
-    data = (uchar*)(addr + sizeof(image_header_t));
-    len  = hdr.ih_size;
-
-    s = getenv ("verify");
-    verify = (s && (*s == 'n')) ? 0 : 1;
-    if (verify) {
-	if (crc32 (0, data, len) != hdr.ih_dcrc) {
-	    strcpy (msg, "Bad Image Data CRC");
-	    goto failure;
-	}
-    }
-
-    if (checkall && fpga_get_version(fpga, (char *)(hdr.ih_name)) < 0)
-	return 1;
-
-    /* align length */
-    if (len & 1)
-	++len;
-
-    /*
-     * Reset FPGA and wait for completion
-     */
-    if (fpga_reset(fpga)) {
-	strcpy (msg, "Reset Timeout");
-	goto failure;
-    }
-
-    printf ("(%s)... ", hdr.ih_name);
-    /*
-     * Copy data to FPGA
-     */
-    fpga_control (fpga, FPGA_LOAD_MODE);
-    while (len--) {
-	*fpga_addr = *data++;
-    }
-    fpga_control (fpga, FPGA_READ_MODE);
-
-    /*
-     * Wait for completion and check error status if timeout
-     */
-    for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control (fpga, FPGA_DONE_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_LOAD_TIMEOUT) {
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    strcpy(msg, "Invalid Size");
-	else
-	    strcpy(msg, "CRC Error");
-	goto failure;
-    }
-
-    printf("done\n");
-    return 0;
-
- failure:
-
-    printf("ERROR: %s\n", msg);
-    return 1;
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-    ulong addr = 0;
-    int i;
-    fpga_t* fpga;
-
-    if (argc < 2)
-	goto failure;
-
-    if (strncmp(argv[1], "stat", 4) == 0) {		/* status */
-	if (argc == 2) {
-	    for (i = 0; i < fpga_count; i++) {
-		fpga_status (&fpga_list[i]);
-	    }
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	    fpga_status (fpga);
-	}
-	else
-	    goto failure;
-    }
-    else if (strcmp(argv[1],"load") == 0) {		/* load */
-	if (argc == 3 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 4) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	addr = simple_strtoul(argv[argc-1], NULL, 16);
-
-	printf ("FPGA load %s: addr %08lx: ",
-		fpga->name, addr);
-	fpga_load (fpga, addr, 1);
-
-    }
-    else if (strncmp(argv[1], "rese", 4) == 0) {	/* reset */
-	if (argc == 2 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	printf ("FPGA reset %s: ", fpga->name);
-	if (fpga_reset(fpga))
-	    printf ("ERROR: Timeout\n");
-	else
-	    printf ("done\n");
-    }
-    else
-	goto failure;
-
-    return 0;
-
- failure:
-    printf ("Usage:\n%s\n", cmdtp->usage);
-    return 1;
-}
-
-U_BOOT_CMD(
-	fpga,	4,	1,	do_fpga,
-	"fpga    - access FPGA(s)\n",
-	"fpga status [name] - print FPGA status\n"
-	"fpga reset  [name] - reset FPGA\n"
-	"fpga load [name] addr - load FPGA configuration data\n"
-);
-
-#endif	/* CONFIG_COMMANDS & CFG_CMD_BSP */
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int fpga_init (void)
-{
-    ulong addr;
-    ulong new_id, old_id = 0;
-    image_header_t *hdr;
-    fpga_t* fpga;
-    int do_load, i, j;
-    char name[16], *s;
-
-    /*
-     *  Port setup for FPGA control
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga_control(&fpga_list[i], FPGA_INIT_PORTS);
-    }
-
-    /*
-     * Load FPGA(s): a new net-list is loaded if the FPGA is
-     * empty, Power-on-Reset or the old one is not up-to-date
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga = &fpga_list[i];
-	printf ("%s:  ", fpga->name);
-
-	for (j = 0; j < strlen(fpga->name); j++)
-	    name[j] = tolower(fpga->name[j]);
-	name[j] = '\0';
-	sprintf(name, "%s_addr", name);
-	addr = 0;
-	if ((s = getenv(name)) != NULL)
-	    addr = simple_strtoul(s, NULL, 16);
-
-	if (!addr) {
-	    printf ("env. variable %s undefined\n", name);
-	    return 1;
-	}
-
-	hdr = (image_header_t *)addr;
-	if ((new_id = fpga_get_version(fpga, (char *)(hdr->ih_name))) == -1)
-	    return 1;
-
-	do_load = 1;
-
-	if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) {
-	    old_id = fpga_control(fpga, FPGA_GET_ID);
-	    if (new_id == old_id)
-		do_load = 0;
-	}
-
-	if (do_load) {
-	    printf ("loading ");
-	    fpga_load (fpga, addr, 0);
-	} else {
-	    printf ("loaded (%08lx)\n", old_id);
-	}
-    }
-
-    return 0;
-}
diff --git a/board/siemens/common/fpga.h b/board/siemens/common/fpga.h
deleted file mode 100644
index 2de25b0146..0000000000
--- a/board/siemens/common/fpga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#ifndef _FPGA_H_
-#define _FPGA_H_
-
-#define FPGA_INIT_IS_HIGH   0
-#define FPGA_INIT_SET_HIGH  1
-#define FPGA_INIT_SET_LOW   2
-#define FPGA_PROG_SET_HIGH  3
-#define FPGA_PROG_SET_LOW   4
-#define FPGA_DONE_IS_HIGH   5
-#define	FPGA_READ_MODE      6
-#define FPGA_LOAD_MODE      7
-#define FPGA_GET_ID         8
-#define FPGA_INIT_PORTS     9
-
-#define FPGA_NAME_LEN       8
-typedef struct {
-    char  name[FPGA_NAME_LEN];
-    ulong conf_base;
-    uint  init_mask;
-    uint  prog_mask;
-    uint  done_mask;
-} fpga_t;
-
-extern fpga_t fpga_list[];
-extern int    fpga_count;
-
-ulong fpga_control (fpga_t* fpga, int cmd);
-
-#endif /* _FPGA_H_ */
diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile
deleted file mode 100644
index e02916f708..0000000000
--- a/board/sorcery/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sorcery/config.mk b/board/sorcery/config.mk
deleted file mode 100644
index 25de0b5a31..0000000000
--- a/board/sorcery/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# sorcery board
-#
-
-TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
deleted file mode 100644
index 165e9e2999..0000000000
--- a/board/sorcery/sorcery.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale Inc.
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <pci.h>
-
-long int initdram (int board_type)
-{
-	ulong size;
-
-	size = dramSetup ();
-
-	return get_ram_size(CFG_SDRAM_BASE, size);
-}
-
-int checkboard (void)
-{
-	puts ("Board: Sorcery-C MPC8220\n");
-
-	return 0;
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-
-#endif /* CONFIG_PCI */
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
-	extern void pci_mpc8220_init (struct pci_controller *hose);
-	pci_mpc8220_init (&hose);
-#endif /* CONFIG_PCI */
-}
diff --git a/board/sorcery/u-boot.lds b/board/sorcery/u-boot.lds
deleted file mode 100644
index 889bc77d2f..0000000000
--- a/board/sorcery/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8220/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
deleted file mode 100644
index 424ab1cf9e..0000000000
--- a/board/spc1920/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/spc1920/config.mk b/board/spc1920/config.mk
deleted file mode 100644
index e361694faa..0000000000
--- a/board/spc1920/config.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and
-# MPC885ADS boards
-#
-
-#TEXT_BASE = 0xFE000000
-TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/spc1920
-HOST_CFLAGS += -I$(TOPDIR)/board/spc1920
-HOST_ENVIRO_CFLAGS += -I$(TOPDIR)/board/spc1920
diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h
deleted file mode 100644
index 3254f820c1..0000000000
--- a/board/spc1920/pld.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __PLD_H__
-#define __PLD_H__
-
-typedef struct spc1920_pld {
-	uchar com1_en;
-	uchar dsp_reset;
-	uchar dsp_hpi_on;
-	uchar codec_dsp_power_en;
-	uchar clk2_en;
-	uchar clk3_select;
-	uchar clk4_select;
-} spc1920_pld_t;
-
-#endif /* __PLD_H__ */
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
deleted file mode 100644
index 028f4c635d..0000000000
--- a/board/spc1920/spc1920.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mpc8xx.h>
-#include "pld.h"
-
-#define	_NOT_USED_	0xFFFFFFFF
-/* #define debug(fmt,args...)     printf (fmt ,##args) */
-
-static long int dram_size (long int, long int *, long int);
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMB RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47, /* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMB RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMB RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMB RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMB RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMB RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07, /* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMB RAM)
-	 */
-	0x7FFFFC07, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-long int initdram (int board_type)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immr->im_memctl;
-	/* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; */
-
-	long int size_b0;
-	long int size8, size9;
-	int i;
-
-	/*
-	 * Configure UPMB for SDRAM
-	 */
-	upmconfig (UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-	udelay(100);
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	/* burst length=4, burst type=sequential, CAS latency=2 */
-	memctl->memc_mar = CFG_MAR;
-
-	/*
-	 * Map controller bank 1 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-
-	/* initialize memory address register */
-	memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
-
-	/* mode initialization (offset 5) */
-	udelay (200);				/* 0x80006105 */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x05);
-
-	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
-	udelay (1);				/* 0x80006130 */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
-	udelay (1);				/* 0x80006130 */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
-	udelay (1);				/* 0x80006106 */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x06);
-
-	memctl->memc_mbmr |= MBMR_PTBE;	/* refresh enabled */
-
-	udelay (200);
-
-	/* Need at least 10 DRAM accesses to stabilize */
-	for (i = 0; i < 10; ++i) {
-		volatile unsigned long *addr =
-			(volatile unsigned long *) CFG_SDRAM_BASE;
-		unsigned long val;
-
-		val = *(addr + i);
-		*(addr + i) = val;
-	}
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 * try 8 column mode
-	 */
-	size8 = dram_size (CFG_MBMR_8COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	/*
-	 * try 9 column mode
-	 */
-	size9 = dram_size (CFG_MBMR_9COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
-
-	if (size8 < size9) {		/* leave configuration at 9 columns */
-		size_b0 = size9;
-		memctl->memc_mbmr = CFG_MBMR_9COL | MBMR_PTBE;
-		udelay (500);
-	} else {			/* back to 8 columns            */
-		size_b0 = size8;
-		memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
-		udelay (500);
-	}
-
-	/*
-	 * Final mapping:
-	 */
-
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) |
-			OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
-	udelay (1000);
-
-
-	/* PLD Setup */
-	memctl->memc_or5 = CFG_OR5_PRELIM;
-	memctl->memc_br5 = CFG_BR5_PRELIM;
-	udelay(1000);
-
-	return (size_b0);
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-static long int dram_size (long int mbmr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mbmr = mbmr_value;
-
-	return (get_ram_size (base, maxsize));
-}
-
-
-/************* other stuff ******************/
-
-
-int board_early_init_f(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-
-	/* Turn on LED PD9 */
-	immap->im_ioport.iop_pdpar &= ~(0x0040);
-	immap->im_ioport.iop_pddir |= 0x0040;
-	immap->im_ioport.iop_pddat |= 0x0040;
-
-	/* Enable PD10 (COM2_EN) */
-	immap->im_ioport.iop_pdpar &= ~0x0020;
-	immap->im_ioport.iop_pddir &= ~0x4000;
-	immap->im_ioport.iop_pddir |= 0x0020;
-	immap->im_ioport.iop_pddat |= 0x0020;
-
-
-#ifdef CFG_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
-	immap->im_cpm.cp_simode |= 0x7000;
-	immap->im_cpm.cp_simode &= ~(0x8000);
-#endif
-
-	return 0;
-}
-
-
-int checkboard (void)
-{
-	puts("Board: SPC1920\n");
-	return 0;
-}
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
deleted file mode 100644
index d526d1d07d..0000000000
--- a/board/spc1920/u-boot.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/traps.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-    lib_ppc/cache.o		(.text)
-    lib_ppc/time.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/stamp/Makefile b/board/stamp/Makefile
deleted file mode 100644
index ee52007b79..0000000000
--- a/board/stamp/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# U-boot - Makefile
-#
-# Copyright (c) 2005 blackfin.uclinux.org
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o stamp.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/stamp/config.mk b/board/stamp/config.mk
deleted file mode 100644
index 0d0073032d..0000000000
--- a/board/stamp/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x07FC0000
-PLATFORM_CPPFLAGS += -I$(TOPDIR)
diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c
deleted file mode 100644
index 7e3af20eab..0000000000
--- a/board/stamp/stamp.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * U-boot - stamp.c STAMP board specific routines
- *
- * Copyright (c) 2005 blackfin.uclinux.org
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mem_init.h>
-#include "stamp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define STATUS_LED_OFF 0
-#define STATUS_LED_ON  1
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-int checkboard (void)
-{
-	printf ("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-	printf ("Board: ADI BF533 Stamp board\n");
-	printf ("       Support: http://blackfin.uclinux.org/\n");
-	printf ("       Richard Klingler <richard@uclinux.net>\n");
-	return 0;
-}
-
-long int initdram (int board_type)
-{
-#ifdef DEBUG
-	printf ("SDRAM attributes:\n");
-	printf ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
-		"CAS Latency:%d cycles\n",
-		(SDRAM_tRCD >> 15),
-		(SDRAM_tRP >> 11),
-		(SDRAM_tRAS >> 6),
-		(SDRAM_tWR >> 19),
-		(SDRAM_CL >> 2));
-	printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf ("Bank size = %d MB\n", 128);
-#endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return (gd->bd->bi_memsize);
-}
-
-void swap_to (int device_id)
-{
-
-	if (device_id == ETHERNET) {
-		*pFIO_DIR = PF0;
-		asm ("ssync;");
-		*pFIO_FLAG_S = PF0;
-		asm ("ssync;");
-	} else if (device_id == FLASH) {
-		*pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0);
-		*pFIO_FLAG_S = (PF4 | PF3 | PF2);
-		*pFIO_MASKA_D = (PF8 | PF6 | PF5);
-		*pFIO_MASKB_D = (PF7);
-		*pFIO_POLAR = (PF8 | PF6 | PF5);
-		*pFIO_EDGE = (PF8 | PF7 | PF6 | PF5);
-		*pFIO_INEN = (PF8 | PF7 | PF6 | PF5);
-		*pFIO_FLAG_D = (PF4 | PF3 | PF2);
-		asm ("ssync;");
-	} else {
-		printf ("Unknown bank to switch\n");
-	}
-
-	return;
-}
-
-#if defined(CONFIG_MISC_INIT_R)
-/* miscellaneous platform dependent initialisations */
-int misc_init_r (void)
-{
-	int i;
-	int cf_stat = 0;
-
-	/* Check whether CF card is inserted */
-	*pFIO_EDGE = FIO_EDGE_CF_BITS;
-	*pFIO_POLAR = FIO_POLAR_CF_BITS;
-	for (i = 0; i < 0x300; i++)
-		asm ("nop;");
-
-	if ((*pFIO_FLAG_S) & CF_STAT_BITS) {
-		cf_stat = 0;
-	} else {
-		cf_stat = 1;
-	}
-
-	*pFIO_EDGE = FIO_EDGE_BITS;
-	*pFIO_POLAR = FIO_POLAR_BITS;
-
-
-	if (cf_stat) {
-		printf ("Booting from COMPACT flash\n");
-
-		/* Set cycle time for CF */
-		*(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL;
-
-		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
-		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
-		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
-
-		serial_setbrg ();
-		ide_init ();
-
-		setenv ("bootargs", "");
-		setenv ("bootcmd",
-			"fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");
-	} else {
-		printf ("Booting from FLASH\n");
-	}
-
-	return 1;
-}
-#endif
-
-#ifdef CONFIG_STAMP_CF
-
-void cf_outb (unsigned char val, volatile unsigned char *addr)
-{
-	/*
-	 * Set PF1 PF0 respectively to 0 1 to divert address
-	 * to the expansion memory banks
-	 */
-	*pFIO_FLAG_S = CF_PF0;
-	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
-
-	*(addr) = val;
-	asm ("ssync;");
-
-	/* Setback PF1 PF0 to 0 0 to address external
-	 * memory banks  */
-	*(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
-}
-
-unsigned char cf_inb (volatile unsigned char *addr)
-{
-	volatile unsigned char c;
-
-	*pFIO_FLAG_S = CF_PF0;
-	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
-
-	c = *(addr);
-	asm ("ssync;");
-
-	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
-
-	return c;
-}
-
-void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words)
-{
-	int i;
-
-	*pFIO_FLAG_S = CF_PF0;
-	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
-
-	for (i = 0; i < words; i++) {
-		*(sect_buf + i) = *(addr);
-		asm ("ssync;");
-	}
-
-	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
-}
-
-void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words)
-{
-	int i;
-
-	*pFIO_FLAG_S = CF_PF0;
-	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
-
-	for (i = 0; i < words; i++) {
-		*(addr) = *(sect_buf + i);
-		asm ("ssync;");
-	}
-
-	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
-}
-#endif
-
-void stamp_led_set (int LED1, int LED2, int LED3)
-{
-	*pFIO_INEN &= ~(PF2 | PF3 | PF4);
-	*pFIO_DIR |= (PF2 | PF3 | PF4);
-
-	if (LED1 == STATUS_LED_OFF)
-		*pFIO_FLAG_S = PF2;
-	else
-		*pFIO_FLAG_C = PF2;
-	if (LED2 == STATUS_LED_OFF)
-		*pFIO_FLAG_S = PF3;
-	else
-		*pFIO_FLAG_C = PF3;
-	if (LED3 == STATUS_LED_OFF)
-		*pFIO_FLAG_S = PF4;
-	else
-		*pFIO_FLAG_C = PF4;
-	asm ("ssync;");
-}
-
-void show_boot_progress (int status)
-{
-	switch (status) {
-	case 1:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
-		break;
-	case 2:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
-		break;
-	case 3:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
-		break;
-	case 4:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
-		break;
-	case 5:
-	case 6:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
-		break;
-	case 7:
-	case 8:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
-		break;
-	case 9:
-	case 10:
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-	case 15:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF,
-			       STATUS_LED_OFF);
-		break;
-	default:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
-		break;
-	}
-}
diff --git a/board/stamp/stamp.h b/board/stamp/stamp.h
deleted file mode 100644
index 7bc33b4147..0000000000
--- a/board/stamp/stamp.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * U-boot - stamp.h
- *
- * Copyright (c) 2005 blackfin.uclinux.org
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __STAMP_H__
-#define __STAMP_H__
-
-extern void init_Flags(void);
-
-extern volatile unsigned long *ambctl0;
-extern volatile unsigned long *ambctl1;
-extern volatile unsigned long *amgctl;
-
-extern unsigned long pll_div_fact;
-extern void serial_setbrg(void);
-extern void pll_set(int vco, int crystal_frq, int pll_div);
-
-/* Definitions used in  Compact Flash Boot support */
-#define FIO_EDGE_CF_BITS 	0x0000
-#define FIO_POLAR_CF_BITS 	0x0000
-#define	FIO_EDGE_BITS  		0x1E0
-#define	FIO_POLAR_BITS  	0x160
-
-/* Compact flash status bits in status register */
-#define CF_STAT_BITS 		0x00000060
-
-/* CF Flags used to switch between expansion and external
- * memory banks
- */
-#define CF_PF0			0x0001
-#define CF_PF1			0x0002
-#define CF_PF1_PF0		0x0003
-
-#endif
diff --git a/board/stamp/u-boot.lds b/board/stamp/u-boot.lds
deleted file mode 100644
index 9a22e50781..0000000000
--- a/board/stamp/u-boot.lds
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * U-boot - u-boot.lds
- *
- * Copyright (c) 2005 blackfin.uclinux.org
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(bfin)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector before the environment sector. If it throws 	*/
-    /* an error during compilation remove an object here to get	*/
-    /* it linked after the configuration sector.		*/
-
-    cpu/bf533/start.o		(.text)
-    cpu/bf533/start1.o		(.text)
-    cpu/bf533/traps.o		(.text)
-    cpu/bf533/interrupt.o	(.text)
-    cpu/bf533/serial.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile
deleted file mode 100644
index 424ab1cf9e..0000000000
--- a/board/stxxtc/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/stxxtc/config.mk b/board/stxxtc/config.mk
deleted file mode 100644
index f5dc034250..0000000000
--- a/board/stxxtc/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# STx XTc
-#
-
-TEXT_BASE = 0x40F00000
diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c
deleted file mode 100644
index 7078704b4e..0000000000
--- a/board/stxxtc/stxxtc.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2005
- * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot port on STx XTc board
- * Mostly copied from Netta
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
-	printf ("Silicon Turnkey eXpress XTc\n");
-	return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_	0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000		0x00000000
-#define CS_0001		0x10000000
-#define CS_0010		0x20000000
-#define CS_0011		0x30000000
-#define CS_0100		0x40000000
-#define CS_0101		0x50000000
-#define CS_0110		0x60000000
-#define CS_0111		0x70000000
-#define CS_1000		0x80000000
-#define CS_1001		0x90000000
-#define CS_1010		0xA0000000
-#define CS_1011		0xB0000000
-#define CS_1100		0xC0000000
-#define CS_1101		0xD0000000
-#define CS_1110		0xE0000000
-#define CS_1111		0xF0000000
-
-#define BS_0000		0x00000000
-#define BS_0001		0x01000000
-#define BS_0010		0x02000000
-#define BS_0011		0x03000000
-#define BS_0100		0x04000000
-#define BS_0101		0x05000000
-#define BS_0110		0x06000000
-#define BS_0111		0x07000000
-#define BS_1000		0x08000000
-#define BS_1001		0x09000000
-#define BS_1010		0x0A000000
-#define BS_1011		0x0B000000
-#define BS_1100		0x0C000000
-#define BS_1101		0x0D000000
-#define BS_1110		0x0E000000
-#define BS_1111		0x0F000000
-
-#define GPL0_AAAA	0x00000000
-#define GPL0_AAA0	0x00200000
-#define GPL0_AAA1	0x00300000
-#define GPL0_000A	0x00800000
-#define GPL0_0000	0x00A00000
-#define GPL0_0001	0x00B00000
-#define GPL0_111A	0x00C00000
-#define GPL0_1110	0x00E00000
-#define GPL0_1111	0x00F00000
-
-#define GPL1_0000	0x00000000
-#define GPL1_0001	0x00040000
-#define GPL1_1110	0x00080000
-#define GPL1_1111	0x000C0000
-
-#define GPL2_0000	0x00000000
-#define GPL2_0001	0x00010000
-#define GPL2_1110	0x00020000
-#define GPL2_1111	0x00030000
-
-#define GPL3_0000	0x00000000
-#define GPL3_0001	0x00004000
-#define GPL3_1110	0x00008000
-#define GPL3_1111	0x0000C000
-
-#define GPL4_0000	0x00000000
-#define GPL4_0001	0x00001000
-#define GPL4_1110	0x00002000
-#define GPL4_1111	0x00003000
-
-#define GPL5_0000	0x00000000
-#define GPL5_0001	0x00000400
-#define GPL5_1110	0x00000800
-#define GPL5_1111	0x00000C00
-#define LOOP		0x00000080
-
-#define EXEN		0x00000040
-
-#define AMX_COL		0x00000000
-#define AMX_ROW		0x00000020
-#define AMX_MAR		0x00000030
-
-#define NA		0x00000008
-
-#define UTA		0x00000004
-
-#define TODT		0x00000002
-
-#define LAST		0x00000001
-
-#define A10_AAAA	GPL0_AAAA
-#define A10_AAA0	GPL0_AAA0
-#define A10_AAA1	GPL0_AAA1
-#define A10_000A	GPL0_000A
-#define A10_0000	GPL0_0000
-#define A10_0001	GPL0_0001
-#define A10_111A	GPL0_111A
-#define A10_1110	GPL0_1110
-#define A10_1111	GPL0_1111
-
-#define RAS_0000	GPL1_0000
-#define RAS_0001	GPL1_0001
-#define RAS_1110	GPL1_1110
-#define RAS_1111	GPL1_1111
-
-#define CAS_0000	GPL2_0000
-#define CAS_0001	GPL2_0001
-#define CAS_1110	GPL2_1110
-#define CAS_1111	GPL2_1111
-
-#define WE_0000		GPL3_0000
-#define WE_0001		GPL3_0001
-#define WE_1110		GPL3_1110
-#define WE_1111		GPL3_1111
-
-/* #define CAS_LATENCY	3  */
-#define CAS_LATENCY	2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL,				/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST,		/* NOP	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-#endif
-
-	/* UPT */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP,		/* ATRFR */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP,		/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
-	CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-static const uint nandcs_table[0x40] = {
-	/* RSS */
-	CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111,
-	CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,	/* NOP   */
-
-	/* RBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
-	/* WBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* UPT */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 ,
-	CS_0001 | LAST,
-};
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 9 */
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
-	unsigned int i, j, v, vv;
-	volatile unsigned int *p;
-	unsigned int pv;
-
-	p = (unsigned int *)addr;
-	pv = (unsigned int)p;
-	for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
-		*p++ = pv;
-
-	p = (unsigned int *)addr;
-	for (i = 0; i < size / sizeof(unsigned int); i++) {
-		v = (unsigned int)p;
-		vv = *p;
-		if (vv != v) {
-			printf("%p: read %08x instead of %08x\n", p, vv, v);
-			hang();
-		}
-		p++;
-	}
-
-	for (j = 0; j < 5; j++) {
-		switch (j) {
-			case 0: v = 0x00000000; break;
-			case 1: v = 0xffffffff; break;
-			case 2: v = 0x55555555; break;
-			case 3: v = 0xaaaaaaaa; break;
-			default:v = 0xdeadbeef; break;
-		}
-		p = (unsigned int *)addr;
-		for (i = 0; i < size / sizeof(unsigned int); i++) {
-			*p = v;
-			vv = *p;
-			if (vv != v) {
-				printf("%p: read %08x instead of %08x\n", p, vv, v);
-				hang();
-			}
-			*p = ~v;
-			p++;
-		}
-	}
-}
-
-#define DO_LOOP do { for (;;) asm volatile ("nop" : : : "memory"); } while(0)
-
-long int initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-	u32 d1, d2;
-
-	upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
-	/*
-	 * Preliminary prescaler for refresh
-	 */
-	memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
-	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or4 = CFG_OR4_PRELIM;
-	memctl->memc_br4 = CFG_BR4_PRELIM;
-
-	memctl->memc_mamr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
-
-	udelay(200);
-
-	/* perform SDRAM initialisation sequence */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3C);	/* precharge all		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(2) | MCR_MAD(0x30);	/* refresh 2 times(0)		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3E);	/* exception program (write mar)*/
-	udelay(1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay(10000);
-
-
-	d1 = 0xAA55AA55;
-	*(volatile u32 *)0 = d1;
-	d2 = *(volatile u32 *)0;
-	if (d1 != d2) {
-		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-		DO_LOOP;
-	}
-
-	d1 = 0x55AA55AA;
-	*(volatile u32 *)0 = d1;
-	d2 = *(volatile u32 *)0;
-	if (d1 != d2) {
-		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-		DO_LOOP;
-	}
-
-	d1 = 0x12345678;
-	*(volatile u32 *)0 = d1;
-	d2 = *(volatile u32 *)0;
-	if (d1 != d2) {
-		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-		DO_LOOP;
-	}
-
-	size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
-	return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
-	int phyno;
-	unsigned short v;
-
-	udelay(10000);
-	/* reset the damn phys */
-	mii_init();
-
-	for (phyno = 0; phyno < 32; ++phyno) {
-		miiphy_read("FEC ETHERNET", phyno, PHY_PHYIDR1, &v);
-		if (v == 0xFFFF)
-			continue;
-		miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_POWD);
-		udelay(10000);
-		miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
-		udelay(10000);
-	}
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK	_BW(6)
-#define PA_GP_OUTMASK	(_BW(7))
-#define PA_SP_MASK	0
-#define PA_ODR_VAL	0
-#define PA_GP_OUTVAL	(_BW(7))
-#define PA_SP_DIRVAL	0
-
-#define PB_GP_INMASK	0
-#define PB_GP_OUTMASK	(_B(23))
-#define PB_SP_MASK	0
-#define PB_ODR_VAL	0
-#define PB_GP_OUTVAL	(_B(23))
-#define PB_SP_DIRVAL	0
-
-#define PC_GP_INMASK	0
-#define PC_GP_OUTMASK	(_BW(15))
-
-#define PC_SP_MASK	0
-#define PC_SOVAL	0
-#define PC_INTVAL	0
-#define PC_GP_OUTVAL	0
-#define PC_SP_DIRVAL	0
-
-#define PE_GP_INMASK	0
-#define PE_GP_OUTMASK	0
-#define PE_GP_OUTVAL	0
-
-#define PE_SP_MASK	0
-#define PE_ODR_VAL	0
-#define PE_SP_DIRVAL	0
-
-int board_early_init_f(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile iop8xx_t *ioport = &immap->im_ioport;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	(void)ioport;
-	(void)cpm;
-	/* NAND chip select */
-	upmconfig(UPMB, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
-	memctl->memc_or2 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
-	memctl->memc_br2 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMB);
-	memctl->memc_mbmr = 0;	/* all clear */
-
-	memctl->memc_br5 &= ~BR_V;
-	memctl->memc_br6 &= ~BR_V;
-	memctl->memc_br7 &= ~BR_V;
-
-	ioport->iop_padat	= PA_GP_OUTVAL;
-	ioport->iop_paodr	= PA_ODR_VAL;
-	ioport->iop_padir	= PA_GP_OUTMASK | PA_SP_DIRVAL;
-	ioport->iop_papar	= PA_SP_MASK;
-
-	cpm->cp_pbdat		= PB_GP_OUTVAL;
-	cpm->cp_pbodr		= PB_ODR_VAL;
-	cpm->cp_pbdir		= PB_GP_OUTMASK | PB_SP_DIRVAL;
-	cpm->cp_pbpar		= PB_SP_MASK;
-
-	ioport->iop_pcdat	= PC_GP_OUTVAL;
-	ioport->iop_pcdir	= PC_GP_OUTMASK | PC_SP_DIRVAL;
-	ioport->iop_pcso	= PC_SOVAL;
-	ioport->iop_pcint	= PC_INTVAL;
-	ioport->iop_pcpar	= PC_SP_MASK;
-
-	cpm->cp_pedat		= PE_GP_OUTVAL;
-	cpm->cp_peodr		= PE_ODR_VAL;
-	cpm->cp_pedir		= PE_GP_OUTMASK | PE_SP_DIRVAL;
-	cpm->cp_pepar		= PE_SP_MASK;
-
-	return 0;
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-
-#include <linux/mtd/nand_legacy.h>
-
-extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
-	unsigned long totlen;
-
-	totlen = nand_probe(CFG_NAND_BASE);
-	printf ("%4lu MB\n", totlen >> 20);
-}
-#endif
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
-	/* XXX add here the really funky stuff */
-}
-
-#endif
-
-#ifdef CONFIG_SHOW_ACTIVITY
-
-/* called from timer interrupt every 1/CFG_HZ sec */
-void board_show_activity(ulong timestamp)
-{
-}
-
-/* called when looping */
-void show_activity(int arg)
-{
-}
-
-#endif
-
-#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
-	/* printf("overwrite_console called\n"); */
-	return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	reset_phys();
-
-	return 0;
-}
diff --git a/board/stxxtc/u-boot.lds b/board/stxxtc/u-boot.lds
deleted file mode 100644
index 9f2901c869..0000000000
--- a/board/stxxtc/u-boot.lds
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp		: { *(.interp)		}
-  .hash         : { *(.hash)		}
-  .dynsym       : { *(.dynsym)		}
-  .dynstr       : { *(.dynstr)		}
-  .rel.text     : { *(.rel.text)	}
-  .rela.text    : { *(.rela.text) 	}
-  .rel.data     : { *(.rel.data)	}
-  .rela.data    : { *(.rela.data) 	}
-  .rel.rodata   : { *(.rel.rodata) 	}
-  .rela.rodata  : { *(.rela.rodata)	}
-  .rel.got      : { *(.rel.got)		}
-  .rela.got     : { *(.rela.got)	}
-  .rel.ctors    : { *(.rel.ctors)	}
-  .rela.ctors   : { *(.rela.ctors)	}
-  .rel.dtors    : { *(.rel.dtors)	}
-  .rela.dtors   : { *(.rela.dtors)	}
-  .rel.bss      : { *(.rel.bss)		}
-  .rela.bss     : { *(.rela.bss)	}
-  .rel.plt      : { *(.rel.plt)		}
-  .rela.plt     : { *(.rela.plt)	}
-  .init         : { *(.init)		}
-  .plt			: { *(.plt) 		}
-  .text      	:
-  {
-    cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/traps.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-    lib_ppc/cache.o		(.text)
-    lib_ppc/time.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/stxxtc/u-boot.lds.debug b/board/stxxtc/u-boot.lds.debug
deleted file mode 100644
index 004e7fd354..0000000000
--- a/board/stxxtc/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    . = env_offset;
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/sx1/Makefile b/board/sx1/Makefile
deleted file mode 100644
index 609ca75c4d..0000000000
--- a/board/sx1/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= sx1.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sx1/config.mk b/board/sx1/config.mk
deleted file mode 100644
index 4902e82332..0000000000
--- a/board/sx1/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# SX1 board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# SX1 has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000  (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-TEXT_BASE = 0x11080000
diff --git a/board/sx1/lowlevel_init.S b/board/sx1/lowlevel_init.S
deleted file mode 100644
index bdf812e05a..0000000000
--- a/board/sx1/lowlevel_init.S
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
-	.word	TEXT_BASE	 /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*
-	 * Configure 1510 pins functions to match our board.
-	 */
-	ldr	r0, REG_PULL_DWN_CTRL_0
-	ldr	r1, VAL_PULL_DWN_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_1
-	ldr	r1, VAL_PULL_DWN_CTRL_1
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_2
-	ldr	r1, VAL_PULL_DWN_CTRL_2
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_3
-	ldr	r1, VAL_PULL_DWN_CTRL_3
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_4
-	ldr	r1, VAL_FUNC_MUX_CTRL_4
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_5
-	ldr	r1, VAL_FUNC_MUX_CTRL_5
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_6
-	ldr	r1, VAL_FUNC_MUX_CTRL_6
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_7
-	ldr	r1, VAL_FUNC_MUX_CTRL_7
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_8
-	ldr	r1, VAL_FUNC_MUX_CTRL_8
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_9
-	ldr	r1, VAL_FUNC_MUX_CTRL_9
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_A
-	ldr	r1, VAL_FUNC_MUX_CTRL_A
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_B
-	ldr	r1, VAL_FUNC_MUX_CTRL_B
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_C
-	ldr	r1, VAL_FUNC_MUX_CTRL_C
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_D
-	ldr	r1, VAL_FUNC_MUX_CTRL_D
-	str	r1, [r0]
-	ldr	r0, REG_VOLTAGE_CTRL_0
-	ldr	r1, VAL_VOLTAGE_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_TEST_DBG_CTRL_0
-	ldr	r1, VAL_TEST_DBG_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_MOD_CONF_CTRL_0
-	ldr	r1, VAL_MOD_CONF_CTRL_0
-	str	r1, [r0]
-
-	/* Move to 1510 mode */
-	ldr	r0, REG_COMP_MODE_CTRL_0
-	ldr	r1, VAL_COMP_MODE_CTRL_0
-	str	r1, [r0]
-
-	/* Set up Traffic Ctlr*/
-	ldr r0, REG_TC_IMIF_PRIO
-	mov r1, #0x0
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFS_PRIO
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFF_PRIO
-	str r1, [r0]
-
-	ldr r0, REG_TC_EMIFS_CONFIG
-	ldr r1, [r0]
-	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
-	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
-	str r1, [r0]	    /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
-	ldr r0, _GPIO_PIN_CONTROL_REG
-	mov r1,#0
-	orr r1, r1, #0x0001 /* M_PCM_SYNC */
-	orr r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	ldr r0, _GPIO_DIR_CONTROL_REG
-	mov r1,#0
-	bic r1, r1, #0x0001 /* M_PCM_SYNC */
-	bic r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	ldr r0, _GPIO_DATA_OUTPUT_REG
-	mov r1,#0
-	bic r1, r1, #0x0001 /* M_PCM_SYNC */
-	orr r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	/* Setup some clock domains */
-	ldr r1, =OMAP1510_CLKS
-	ldr r0, REG_ARM_IDLECT2
-	strh r1, [r0]  /* CLKM, Clock domain control. */
-
-	mov r1, #0x01  /* PER_EN bit */
-	ldr r0, REG_ARM_RSTCT2
-	strh r1, [r0]  /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable  */
-	/* I supposidly need to enable the dsp clock before switching */
-	mov r1, #0x1000
-	ldr r0, REG_ARM_SYSST
-	strh r1, [r0]
-	mov r0, #0x400
-1:
-	subs r0, r0, #0x1   /* wait for any bubbles to finish */
-	bne 1b
-
-	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
-	ldr r0, REG_ARM_CKCTL
-	strh r1, [r0]
-
-	/* setup DPLL 1 */
-	ldr r1, VAL_DPLL1_CTL
-	ldr r0, REG_DPLL1_CTL
-	strh r1, [r0]
-	ands r1, r1, #0x10  /* Check if PLL is enabled. */
-	beq lock_end	    /* Do not look for lock if BYPASS selected */
-2:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01  /* Check the LOCK bit. */
-	beq 2b		    /* ...loop until bit goes hi. */
-lock_end:
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov r0, #0x10000000		    /* Load physical SDRAM base. */
-	mov r1, pc			    /* Get current execution location. */
-	cmp r1, r0			    /* Compare. */
-	bge skip_sdram			    /* Skip over EMIF-fast initialization if running from SDRAM. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800			       /* value should be checked */
-3:
-	subs r3, r3, #0x1		      /* Decrement count */
-	bne 3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
-	bic r3, r0, #0xC		    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
-	orr r3, r3, #0x8000000		    /* (BIT27) Disable CLK when Power down or Self-Refresh */
-	orr r3, r3, #0x4000000		    /* BIT26 Power Down Enable */
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r3, [r2]			    /* Store the passed value with AR disabled. */
-
-	ldr r1, VAL_TC_EMIFF_MRS	    /* get MRS value */
-	ldr r2, REG_TC_EMIFF_MRS	    /* Point to MRS register. */
-	str r1, [r2]			    /* Store the passed value.*/
-
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r0, [r2]			    /* Store the passed value. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800
-4:
-	subs r3, r3, #1			    /* Decrement count. */
-	bne 4b
-
-skip_sdram:
-
-	/* slow interface */
-	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
-	ldr r0, REG_TC_EMIFS_CS0_CONFIG
-	str r1, [r0] /* Chip Select 0 */
-	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
-	ldr r0, REG_TC_EMIFS_CS1_CONFIG
-	str r1, [r0] /* Chip Select 1 */
-	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
-	ldr r0, REG_TC_EMIFS_CS2_CONFIG
-	str r1, [r0] /* Chip Select 2 */
-	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
-	ldr r0, REG_TC_EMIFS_CS3_CONFIG
-	str r1, [r0] /* Chip Select 3 */
-
-	/* back to arch calling code */
-	mov	pc, lr
-
-/* the literal pools origin */
-	.ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0:		/* 32 bits */
-	.word 0xfffe1000
-REG_FUNC_MUX_CTRL_1:		/* 32 bits */
-	.word 0xfffe1004
-REG_FUNC_MUX_CTRL_2:		/* 32 bits */
-	.word 0xfffe1008
-REG_COMP_MODE_CTRL_0:		/* 32 bits */
-	.word 0xfffe100c
-REG_FUNC_MUX_CTRL_3:		/* 32 bits */
-	.word 0xfffe1010
-REG_FUNC_MUX_CTRL_4:		/* 32 bits */
-	.word 0xfffe1014
-REG_FUNC_MUX_CTRL_5:		/* 32 bits */
-	.word 0xfffe1018
-REG_FUNC_MUX_CTRL_6:		/* 32 bits */
-	.word 0xfffe101c
-REG_FUNC_MUX_CTRL_7:		/* 32 bits */
-	.word 0xfffe1020
-REG_FUNC_MUX_CTRL_8:		/* 32 bits */
-	.word 0xfffe1024
-REG_FUNC_MUX_CTRL_9:		/* 32 bits */
-	.word 0xfffe1028
-REG_FUNC_MUX_CTRL_A:		/* 32 bits */
-	.word 0xfffe102C
-REG_FUNC_MUX_CTRL_B:		/* 32 bits */
-	.word 0xfffe1030
-REG_FUNC_MUX_CTRL_C:		/* 32 bits */
-	.word 0xfffe1034
-REG_FUNC_MUX_CTRL_D:		/* 32 bits */
-	.word 0xfffe1038
-REG_PULL_DWN_CTRL_0:		/* 32 bits */
-	.word 0xfffe1040
-REG_PULL_DWN_CTRL_1:		/* 32 bits */
-	.word 0xfffe1044
-REG_PULL_DWN_CTRL_2:		/* 32 bits */
-	.word 0xfffe1048
-REG_PULL_DWN_CTRL_3:		/* 32 bits */
-	.word 0xfffe104c
-REG_VOLTAGE_CTRL_0:		/* 32 bits */
-	.word 0xfffe1060
-REG_TEST_DBG_CTRL_0:		/* 32 bits */
-	.word 0xfffe1070
-REG_MOD_CONF_CTRL_0:		/* 32 bits */
-	.word 0xfffe1080
-REG_TC_IMIF_PRIO:		/* 32 bits */
-	.word 0xfffecc00
-REG_TC_EMIFS_PRIO:		/* 32 bits */
-	.word 0xfffecc04
-REG_TC_EMIFF_PRIO:		/* 32 bits */
-	.word 0xfffecc08
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
-	.word 0xfffecc20
-REG_TC_EMIFF_MRS:		/* 32 bits */
-	.word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-/* identification code register */
-REG_IDCODE:			/* 32 bits */
-	.word 0xfffed404
-
-/* SX1 specific */
-_GPIO_PIN_CONTROL_REG:
-	.word GPIO_PIN_CONTROL_REG
-_GPIO_DIR_CONTROL_REG:
-	.word GPIO_DIR_CONTROL_REG
-_GPIO_DATA_OUTPUT_REG:
-	.word GPIO_DATA_OUTPUT_REG
-
-VAL_COMP_MODE_CTRL_0:
-	.word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
-	.word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
-	.word 0x00001000
-VAL_FUNC_MUX_CTRL_8:
-	.word 0x00001240       /*[Knoller]  Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_9:
-	.word 0x00201008
-VAL_FUNC_MUX_CTRL_A:
-	.word 0x00001000
-VAL_FUNC_MUX_CTRL_B:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_C:
-	.word 0x09008001       /*[Knoller]  Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_D:
-	.word 0x00000000
-VAL_PULL_DWN_CTRL_0:
-	.word 0xfffeffff
-VAL_PULL_DWN_CTRL_1:
-	.word 0xd1ffffec
-VAL_PULL_DWN_CTRL_2:
-	.word 0xffa80c5b
-VAL_PULL_DWN_CTRL_3:
-	.word 0xffffc0fe
-VAL_VOLTAGE_CTRL_0:
-	.word 0x00000007
-VAL_TEST_DBG_CTRL_0:
-	/* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
-	 * says to write a 7.  Don't know what the right thing is to do, so
-	 * I'm leaving it at 7 since that's what was already here.
-	 */
-	.word 0x00000007
-VAL_MOD_CONF_CTRL_0:
-	.word 0x0da20000       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_ARM_CKCTL:
-	.word 0x010D
-
-VAL_DPLL1_CTL:
-	.word 0x3A33   /*[Hertle] Value of Symbian Image*/
-
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
-	.word 0x00001149
-
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
-	.word 0x00004158
-
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x00213090       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00215070       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x0105f0b4       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027       /*[Knoller]  Value of Symbian Image Wing B2*/
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
deleted file mode 100644
index aaef76e713..0000000000
--- a/board/sx1/sx1.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-			  "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* arch number of SX1 Board */
-	gd->bd->bi_arch_number = MACH_TYPE_SX1;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit.	 However to make it
- *  work, you need make sure your kernel startup flush bug is fixed.
- *  ... rkw ...
- */
-	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-	/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
-	/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
-	/* setup gpio direction to match board (no floats!) */
-	/**gdir = 0xCFF9; */
-	/**mdir = 0x103F; */
-
-	return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
-	unsigned int regval;
-
-	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
-	regval = regval | 0x0001;	/* Turn off write protection for flash devices. */
-	if (regval & 0x0002) {
-		regval = regval & 0xfffd;	/* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
-		/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
-		/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
-		/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
-	}
-	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
-	/* take the Ethernet controller out of reset and wait
-	 * for the EEPROM load to complete.
-	 */
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (3);
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
diff --git a/board/sx1/u-boot.lds b/board/sx1/u-boot.lds
deleted file mode 100644
index d28155f4cb..0000000000
--- a/board/sx1/u-boot.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text	   :
-	{
-	  cpu/arm925t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/total5200/Makefile b/board/total5200/Makefile
deleted file mode 100644
index 10e5fc3406..0000000000
--- a/board/total5200/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o sdram.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/total5200/config.mk b/board/total5200/config.mk
deleted file mode 100644
index e7ac93d241..0000000000
--- a/board/total5200/config.mk
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2003-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Total5200 board:
-#
-#	Valid values for TEXT_BASE are:
-#
-#	0xFFF00000   boot high (standard configuration)
-#	0xFE000000   boot low
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-## Standard: boot high
-TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h
deleted file mode 100644
index 5b0923e3e8..0000000000
--- a/board/total5200/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xC2222600
-#define SDRAM_CONFIG2	0x88B70004
-#define SDRAM_ADDRSEL	0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h
deleted file mode 100644
index 4b5ac80b35..0000000000
--- a/board/total5200/mt48lc32m16a2-75.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Micron MT48LC32M16A2-75 is compatible to:
- *  - Infineon HYB39S512160AT-75
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-#if defined(CONFIG_MPC5200)
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x514F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
-
-#else
-#error CONFIG_MPC5200 is not defined
-#endif
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
deleted file mode 100644
index a1601f274d..0000000000
--- a/board/total5200/sdram.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-#include "sdram.h"
-
-#ifndef CFG_RAMBOOT
-static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	if (sdram_conf->ddr) {
-		/* set mode register: extended mode */
-		*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->emode;
-		__asm__ volatile ("sync");
-
-		/* set mode register: reset DLL */
-		*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode | 0x04000000;
-		__asm__ volatile ("sync");
-	}
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-#if defined(CONFIG_MPC5200)
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-	__asm__ volatile ("sync");
-
-	if (sdram_conf->ddr) {
-		/* set tap delay */
-		*(vu_long *)MPC5XXX_CDM_PORCFG = sdram_conf->tapdelay;
-		__asm__ volatile ("sync");
-	}
-
-	/* find RAM size using SDRAM CS0 only */
-	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		mpc5xxx_sdram_start(sdram_conf, 0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
-	if (test1 > test2) {
-		mpc5xxx_sdram_start(sdram_conf, 0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize + dramsize2;
-}
-
-#elif defined(CONFIG_MGT5100)
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup and enable SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
-	__asm__ volatile ("sync");
-
-	/* find RAM size */
-	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		mpc5xxx_sdram_start(sdram_conf, 0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
-	/* Retrieve amount of SDRAM available */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h
deleted file mode 100644
index bc21e1d300..0000000000
--- a/board/total5200/sdram.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-typedef struct {
-	ulong ddr;
-	ulong mode;
-	ulong emode;
-	ulong control;
-	ulong config1;
-	ulong config2;
-#if defined(CONFIG_MPC5200)
-	ulong tapdelay;
-#endif
-#if defined(CONFIG_MGT5100)
-	ulong addrsel;
-#endif
-} sdram_conf_t;
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
deleted file mode 100644
index 1a35187260..0000000000
--- a/board/total5200/total5200.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#include "sdram.h"
-
-#if CONFIG_TOTAL5200_REV==2
-#include "mt48lc32m16a2-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-long int initdram (int board_type)
-{
-	sdram_conf_t sdram_conf;
-
-	sdram_conf.ddr = SDRAM_DDR;
-	sdram_conf.mode = SDRAM_MODE;
-	sdram_conf.emode = 0;
-	sdram_conf.control = SDRAM_CONTROL;
-	sdram_conf.config1 = SDRAM_CONFIG1;
-	sdram_conf.config2 = SDRAM_CONFIG2;
-#if defined(CONFIG_MPC5200)
-	sdram_conf.tapdelay = 0;
-#endif
-#if defined(CONFIG_MGT5100)
-	sdram_conf.addrsel = SDRAM_ADDRSEL;
-#endif
-	return mpc5xxx_sdram_init (&sdram_conf);
-}
-
-int checkboard (void)
-{
-#if defined(CONFIG_MPC5200)
-#if CONFIG_TOTAL5200_REV==2
-	puts ("Board: Total5200 Rev.2 ");
-#else
-	puts ("Board: Total5200 ");
-#endif
-#elif defined(CONFIG_MGT5100)
-	puts ("Board: Total5100 ");
-#endif
-
-/*
- * Retrieve FPGA Revision.
- */
-printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
-
-/*
- * Take all peripherals in power-up mode.
- */
-#if CONFIG_TOTAL5200_REV==2
-	*(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
-#else
-	*(vu_long *) (CFG_CPLD_BASE + 0x400) = 0x70;
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_MGT5100)
-int board_early_init_r(void)
-{
-	/*
-	 * Now, when we are in RAM, enable CS0
-	 * because CS_BOOT cannot be written.
-	 */
-	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-/* IRDA_1 aka PSC6_3 (pin C13) */
-#define GPIO_IRDA_1	0x20000000UL
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-    	/* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
-	*(vu_long *) MPC5XXX_GPIO_DIR    |= GPIO_IRDA_1;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_GPIO_DATA_O &= ~GPIO_IRDA_1;
-	} else {
-		*(vu_long *) MPC5XXX_GPIO_DATA_O |=  GPIO_IRDA_1;
-	}
-}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
-
-#ifdef CONFIG_VIDEO_SED13806
-#include <sed13806.h>
-
-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
-
-#ifdef CONFIG_VIDEO_SED13806_8BPP
-#error CONFIG_VIDEO_SED13806_8BPP not supported.
-#endif /* CONFIG_VIDEO_SED13806_8BPP */
-
-#ifdef CONFIG_VIDEO_SED13806_16BPP
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x00},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0x00},   /* General IO Pins Control Register 0 */
-    {0x0009,0x00},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x02},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x03},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x0A},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x05},   /* LCD Display Mode Register */
-    {0x0041,0x00},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x10},   /* TV Output Control Register */
-    {0x0060,0x05},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x00},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x00},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-#endif /* CONFIG_VIDEO_SED13806_16BPP */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/* Return text to be printed besides the logo. */
-void video_get_info_str (int line_number, char *info)
-{
-	if (line_number == 1) {
-#ifdef CONFIG_MGT5100
-		strcpy (info, " Total5100");
-#elif CONFIG_TOTAL5200_REV==1
-		strcpy (info, " Total5200");
-#elif CONFIG_TOTAL5200_REV==2
-		strcpy (info, " Total5200 Rev.2");
-#else
-#error CONFIG_TOTAL5200_REV must be 1 or 2.
-#endif
-	} else {
-		info [0] = '\0';
-	}
-}
-#endif
-
-/* Returns  SED13806 base address. First thing called in the driver. */
-unsigned int board_video_init (void)
-{
-	return CFG_LCD_BASE;
-}
-
-/* Called after initializing the SED13806 and before clearing the screen. */
-void board_validate_screen (unsigned int base)
-{
-}
-
-/* Return a pointer to the initialization sequence. */
-const S1D_REGS *board_get_regs (void)
-{
-	return init_regs;
-}
-
-int board_get_width (void)
-{
-	return DISPLAY_WIDTH;
-}
-
-int board_get_height (void)
-{
-	return DISPLAY_HEIGHT;
-}
-
-#endif /* CONFIG_VIDEO_SED13806 */
diff --git a/board/total5200/u-boot.lds b/board/total5200/u-boot.lds
deleted file mode 100644
index 3cc2968487..0000000000
--- a/board/total5200/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/tqm8272/Makefile b/board/tqm8272/Makefile
deleted file mode 100644
index 3dbf913d2e..0000000000
--- a/board/tqm8272/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= lib$(BOARD).a
-
-OBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
-
-$(LIB):	.depend $(OBJS)
-	$(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/board/tqm8272/config.mk b/board/tqm8272/config.mk
deleted file mode 100644
index af7a81e335..0000000000
--- a/board/tqm8272/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TQM8272 boards
-#
-
-# This should be equal to the CFG_FLASH_BASE define in config_TQM8260.h
-# for the "final" configuration, with U-Boot in flash, or the address
-# in RAM where U-Boot is loaded at for debugging.
-#
-TEXT_BASE = 0x40000000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/tqm8272/tqm8272.c b/board/tqm8272/tqm8272.c
deleted file mode 100644
index 5f863c4eb8..0000000000
--- a/board/tqm8272/tqm8272.c
+++ /dev/null
@@ -1,1229 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#include <command.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/m8260_pci.h>
-#endif
-#if CONFIG_OF_FLAT_TREE
-#include <ft_build.h>
-#include <image.h>
-#endif
-
-#define deb_printf(fmt,arg...) \
-	do { } while (0)
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-unsigned long board_get_cpu_clk_f (void);
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 *ATMTXEN */
-	/* PA30 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTCA	*/
-	/* PA29 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTSOC	*/
-	/* PA28 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 *ATMRXEN */
-	/* PA27 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRSOC */
-	/* PA26 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRCA */
-	/* PA25 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[0] */
-	/* PA9	*/ {   1,   1,	 0,   1,   0,	0   }, /* SMC2 TXD */
-	/* PA8	*/ {   1,   1,	 0,   0,   0,	0   }, /* SMC2 RXD */
-	/* PA7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA7 */
-	/* PA6	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA6 */
-	/* PA5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA5 */
-	/* PA4	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA4 */
-	/* PA3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA3 */
-	/* PA2	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA2 */
-	/* PA1	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA1 */
-	/* PA0	*/ {   0,   0,	 0,   1,   0,	0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
-	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
-	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */
-	/* PB14 */ {   0,   0,	 0,   0,   0,	0   }, /* PB14 */
-	/* PB13 */ {   0,   0,	 0,   0,   0,	0   }, /* PB13 */
-	/* PB12 */ {   0,   0,	 0,   0,   0,	0   }, /* PB12 */
-	/* PB11 */ {   0,   0,	 0,   0,   0,	0   }, /* PB11 */
-	/* PB10 */ {   0,   0,	 0,   0,   0,	0   }, /* PB10 */
-	/* PB9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB9 */
-	/* PB8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB8 */
-	/* PB7	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB7 */
-	/* PB6	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB6 */
-	/* PB5	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB5 */
-	/* PB4	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB4 */
-	/* PB3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,	 0,   1,   0,	0   }, /* PC31 */
-	/* PC30 */ {   0,   0,	 0,   0,   0,	0   }, /* PC30 */
-	/* PC29 */ {   1,   1,	 1,   0,   0,	0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,	 0,   1,   0,	0   }, /* PC28 */
-	/* PC27 */ {   0,   0,	 0,   1,   0,	0   }, /* PC27 */
-	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
-	/* PC25 */ {   0,   0,	 0,   1,   0,	0   }, /* PC25 */
-	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */
-	/* PC18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII TX_CLK */
-	/* PC17 */ {   1,   0,	 0,   1,   0,	0   }, /* PC17 MDC */
-	/* PC16 */ {   1,   0,	 0,   0,   0,	0   }, /* PC16 MDIO*/
-	/* PC15 */ {   0,   0,	 0,   1,   0,	0   }, /* PC15 */
-	/* PC14 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,	 0,   1,   0,	0   }, /* PC13 */
-	/* PC12 */ {   0,   0,	 0,   1,   0,	0   }, /* PC12 */
-	/* PC11 */ {   0,   0,	 0,   1,   0,	0   }, /* PC11 */
-	/* PC10 */ {   0,   0,	 0,   1,   0,	0   }, /* PC10 */
-	/* PC9	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC9 */
-	/* PC8	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC8 */
-	/* PC7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC7 */
-	/* PC6	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC6 */
-	/* PC5	*/ {   1,   1,	 0,   1,   0,	0   }, /* PC5 SMC1 TXD */
-	/* PC4	*/ {   1,   1,	 0,   0,   0,	0   }, /* PC4 SMC1 RXD */
-	/* PC3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC3 */
-	/* PC2	*/ {   0,   0,	 0,   1,   0,	1   }, /* ENET FDE */
-	/* PC1	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET DSQE */
-	/* PC0	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,	 1,   1,   0,	0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,	 0,   1,   0,	0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   0,	 0,   1,   0,	0   }, /* PD28 */
-	/* PD27 */ {   0,   0,	 0,   1,   0,	0   }, /* PD27 */
-	/* PD26 */ {   0,   0,	 0,   1,   0,	0   }, /* PD26 */
-	/* PD25 */ {   0,   0,	 0,   1,   0,	0   }, /* PD25 */
-	/* PD24 */ {   0,   0,	 0,   1,   0,	0   }, /* PD24 */
-	/* PD23 */ {   0,   0,	 0,   1,   0,	0   }, /* PD23 */
-	/* PD22 */ {   0,   0,	 0,   1,   0,	0   }, /* PD22 */
-	/* PD21 */ {   0,   0,	 0,   1,   0,	0   }, /* PD21 */
-	/* PD20 */ {   0,   0,	 0,   1,   0,	0   }, /* PD20 */
-	/* PD19 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
-	/* PD18 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
-	/* PD17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SOFT_I2C)
-	/* PD15 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,	 1,   0,   1,	0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,	 1,   0,   1,	0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,	 1,   0,   1,	0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,	 1,   0,   1,	0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   0,   0,	 0,   0,   0,	0   }, /* PD13 */
-	/* PD12 */ {   0,   0,	 0,   0,   0,	0   }, /* PD12 */
-	/* PD11 */ {   0,   0,	 0,   0,   0,	0   }, /* PD11 */
-	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
-	/* PD9	*/ {   1,   1,	 0,   1,   0,	0   }, /* SMC1 TXD */
-	/* PD8	*/ {   1,   1,	 0,   0,   0,	0   }, /* SMC1 RXD */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD7 */
-	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
-	/* PD5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PD5 */
-	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
-	/* PD3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    }
-};
-
-#define _NOT_USED_	0xFFFFFFFF
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const uint upmTable67[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const uint upmTable100[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const uint upmTable133[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-static int	chipsel = 0;
-
-/* UPM pattern for slow init */
-static const uint upmTableSlow[] =
-{
-    /* Offset	UPM Read Single RAM array entry */
-    /* 0x00 */	0xffffee00, 0x00ffcc80, 0x00ffcf00, 0x00ffdc00,
-    /* 0x04 */	0x00ffce80, 0x00ffcc00, 0x00ffee00, 0x3fffcc07,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry */
-    /* 0x18 */	0xffffee00, 0x00ffec80, 0x00ffef00, 0x00fffc80,
-    /* 0x1C */	0x00fffe00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for fast init */
-static const uint upmTableFast[] =
-{
-    /* Offset	UPM Read Single RAM array entry */
-    /* 0x00 */	0xffffee00, 0x00ffcc80, 0x00ffcd80, 0x00ffdc00,
-    /* 0x04 */	0x00ffdc00, 0x00ffcf00, 0x00ffec00, 0x3fffcc07,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry */
-    /* 0x18 */	0xffffee00, 0x00ffec80, 0x00ffee80, 0x00fffc00,
-    /* 0x1C */	0x00fffc00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-
-	puts ("Board: ");
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
-		puts (p);
-	} else {
-		puts ("No HWIB assuming TQM8272");
-	}
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-static int get_cas_latency (void)
-{
-	/* get it from the option -ts in CIB */
-	/* default is 3 */
-	int	ret = 3;
-	int	pos = 0;
-	char	*p = (char *) CIB_INFO_START_ADDR;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return ret;
-		}
-		if (*p == '-') {
-			if ((p[1] == 't') && (p[2] == 's')) {
-				return (p[4] - '0');
-			}
-		}
-		p++;
-		pos++;
-	}
-	return ret;
-}
-#endif
-
-static ulong set_sdram_timing (volatile uint *sdmr_ptr, ulong sdmr, int col)
-{
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-	int	clk = board_get_cpu_clk_f ();
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-	int	busmode = (immr->im_siu_conf.sc_bcr & BCR_EBM ? 1 : 0);
-	int	cas;
-
-	sdmr = sdmr & ~(PSDMR_RFRC_MSK | PSDMR_PRETOACT_MSK | PSDMR_WRC_MSK | \
-			 PSDMR_BUFCMD);
-	if (busmode) {
-		switch (clk) {
-			case 66666666:
-				sdmr |= (PSDMR_RFRC_66MHZ_60X | \
-					PSDMR_PRETOACT_66MHZ_60X | \
-					PSDMR_WRC_66MHZ_60X | \
-					PSDMR_BUFCMD_66MHZ_60X);
-				break;
-			case 100000000:
-				sdmr |= (PSDMR_RFRC_100MHZ_60X | \
-					PSDMR_PRETOACT_100MHZ_60X | \
-					PSDMR_WRC_100MHZ_60X | \
-					PSDMR_BUFCMD_100MHZ_60X);
-				break;
-
-		}
-	} else {
-		switch (clk) {
-			case 66666666:
-				sdmr |= (PSDMR_RFRC_66MHZ_SINGLE | \
-					PSDMR_PRETOACT_66MHZ_SINGLE | \
-					PSDMR_WRC_66MHZ_SINGLE | \
-					PSDMR_BUFCMD_66MHZ_SINGLE);
-				break;
-			case 100000000:
-				sdmr |= (PSDMR_RFRC_100MHZ_SINGLE | \
-					PSDMR_PRETOACT_100MHZ_SINGLE | \
-					PSDMR_WRC_100MHZ_SINGLE | \
-					PSDMR_BUFCMD_100MHZ_SINGLE);
-				break;
-			case 133333333:
-				sdmr |= (PSDMR_RFRC_133MHZ_SINGLE | \
-					PSDMR_PRETOACT_133MHZ_SINGLE | \
-					PSDMR_WRC_133MHZ_SINGLE | \
-					PSDMR_BUFCMD_133MHZ_SINGLE);
-				break;
-		}
-	}
-	cas = get_cas_latency();
-	sdmr &=~ (PSDMR_CL_MSK | PSDMR_LDOTOPRE_MSK);
-	sdmr |= cas;
-	sdmr |= ((cas - 1) << 6);
-	return sdmr;
-#else
-	return sdmr;
-#endif
-}
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base, int col)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-	sdmr = set_sdram_timing (sdmr_ptr, sdmr, col);
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CFG_RAMBOOT
-	long size8, size9;
-#endif
-	long psize, lsize;
-
-	psize = 16 * 1024 * 1024;
-	lsize = 0;
-
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
-
-#ifndef CFG_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-					  (uchar *) CFG_SDRAM_BASE, 8);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
-					  (uchar *) CFG_SDRAM_BASE, 9);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-						  (uchar *) CFG_SDRAM_BASE, 8);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-#endif /* CFG_RAMBOOT */
-
-	icache_enable ();
-
-	return (psize);
-}
-
-
-static inline int scanChar (char *p, int len, unsigned long *number)
-{
-	int	akt = 0;
-
-	*number = 0;
-	while (akt < len) {
-		if ((*p >= '0') && (*p <= '9')) {
-			*number *= 10;
-			*number += *p - '0';
-			p += 1;
-		} else {
-			if (*p == '-')	return akt;
-			return -1;
-		}
-		akt ++;
-	}
-	return akt;
-}
-
-typedef struct{
-	int	Bus;
-	int	flash;
-	int	flash_nr;
-	int	ram;
-	int	ram_cs;
-	int	nand;
-	int	nand_cs;
-	int	eeprom;
-	int	can;
-	unsigned long	cpunr;
-	unsigned long	option;
-	int	SecEng;
-	int	cpucl;
-	int	cpmcl;
-	int	buscl;
-	int	busclk_real_ok;
-	int	busclk_real;
-	unsigned char	OK;
-	unsigned char  ethaddr[20];
-} HWIB_INFO;
-
-HWIB_INFO	hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
-			 0, 0, 0, 0, 0, 0};
-
-static int dump_hwib(void)
-{
-	HWIB_INFO	*hw = &hwinf;
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-	char *s = getenv("serial#");
-
-	if (hw->OK) {
-		printf ("HWIB on %x\n", HWIB_INFO_START_ADDR);
-		printf ("serial : %s\n", s);
-		printf ("ethaddr: %s\n", hw->ethaddr);
-		printf ("FLASH	: %x nr:%d\n", hw->flash, hw->flash_nr);
-		printf ("RAM	: %x cs:%d\n", hw->ram, hw->ram_cs);
-		printf ("CPU	: %d\n", hw->cpunr);
-		printf ("CAN	: %d\n", hw->can);
-		if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom);
-		else printf ("No EEprom\n");
-		if (hw->nand) {
-			printf ("NAND	: %x\n", hw->nand);
-			printf ("NAND CS: %d\n", hw->nand_cs);
-		} else { printf ("No NAND\n");}
-		printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII"));
-		printf ("  real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \
-				 "60x" : "Single PQII"));
-		printf ("Option : %x\n", hw->option);
-		printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no"));
-		printf ("CPM Clk: %d\n", hw->cpmcl);
-		printf ("CPU Clk: %d\n", hw->cpucl);
-		printf ("Bus Clk: %d\n", hw->buscl);
-		if (hw->busclk_real_ok) {
-			printf ("  real Clk: %d\n", hw->busclk_real);
-		}
-		printf ("CAS	: %d\n", get_cas_latency());
-	} else {
-		printf("HWIB @%x not OK\n", HWIB_INFO_START_ADDR);
-	}
-	return 0;
-}
-
-static inline int search_real_busclk (int *clk)
-{
-	int	part = 0, pos = 0;
-	char *p = (char *) CIB_INFO_START_ADDR;
-	int	ok = 0;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return 0;
-		}
-		switch (part) {
-		default:
-			if (*p == '-') {
-				++part;
-			}
-			break;
-		case 3:
-			if (*p == '-') {
-				++part;
-				break;
-			}
-			if (*p == 'b') {
-				ok = 1;
-				p++;
-				break;
-			}
-			if (ok) {
-				switch (*p) {
-				case '6':
-					*clk = 66666666;
-					return 1;
-					break;
-				case '1':
-					if (p[1] == '3') {
-						*clk = 133333333;
-					} else {
-						*clk = 100000000;
-					}
-					return 1;
-					break;
-				}
-			}
-			break;
-		}
-		p++;
-	}
-	return 0;
-}
-
-int analyse_hwib (void)
-{
-	char	*p = (char *) HWIB_INFO_START_ADDR;
-	int	anz;
-	int	part = 1, i = 0, pos = 0;
-	HWIB_INFO	*hw = &hwinf;
-
-	deb_printf(" %s pointer: %p\n", __FUNCTION__, p);
-	/* Head = TQM */
-	if (*((unsigned long *)p) != (unsigned long)CFG_HWINFO_MAGIC) {
-		deb_printf("No HWIB\n");
-		return -1;
-	}
-	p += 3;
-	if (scanChar (p, 4, &hw->cpunr) < 0) {
-		deb_printf("No CPU\n");
-		return -2;
-	}
-	p +=4;
-
-	hw->flash = 0x200000 << (*p - 'A');
-	p++;
-	hw->flash_nr = *p - '0';
-	p++;
-
-	hw->ram = 0x2000000 << (*p - 'A');
-	p++;
-	if (*p == '2') {
-		hw->ram_cs = 2;
-		p++;
-	}
-
-	if (*p == 'A') hw->can = 1;
-	if (*p == 'B') hw->can = 2;
-	p +=1;
-	p +=1;	/* connector */
-	if (*p != '0') {
-		hw->eeprom = 0x100 << (*p - 'A');
-	}
-	p++;
-
-	if ((*p < '0') || (*p > '9')) {
-		/* NAND before z-option */
-		hw->nand = 0x8000000 << (*p - 'A');
-		p++;
-		hw->nand_cs = *p - '0';
-		p += 2;
-	}
-	/* z-option */
-	anz = scanChar (p, 4, &hw->option);
-	if (anz < 0) {
-		deb_printf("No option\n");
-		return -3;
-	}
-	if (hw->option & 0x8) hw->Bus = 1;
-	p += anz;
-	if (*p != '-') {
-		deb_printf("No -\n");
-		return -4;
-	}
-	p++;
-	/* C option */
-	if (*p == 'E') {
-		hw->SecEng = 1;
-		p++;
-	}
-	switch (*p) {
-		case 'M': hw->cpucl = 266666666;
-			break;
-		case 'P': hw->cpucl = 300000000;
-			break;
-		case 'T': hw->cpucl = 400000000;
-			break;
-		default:
-			deb_printf("No CPU Clk: %c\n", *p);
-			return -5;
-			break;
-	}
-	p++;
-	switch (*p) {
-		case 'I': hw->cpmcl = 200000000;
-			break;
-		case 'M': hw->cpmcl = 300000000;
-			break;
-		default:
-			deb_printf("No CPM Clk\n");
-			return -6;
-			break;
-	}
-	p++;
-	switch (*p) {
-		case 'B': hw->buscl = 66666666;
-			break;
-		case 'E': hw->buscl = 100000000;
-			break;
-		case 'F': hw->buscl = 133333333;
-			break;
-		default:
-			deb_printf("No BUS Clk\n");
-			return -7;
-			break;
-	}
-	p++;
-
-	hw->OK = 1;
-	/* search MAC Address */
-	while ((*p != '\0') && (pos < CFG_HWINFO_SIZE)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return 0;
-		}
-		switch (part) {
-		default:
-			if (*p == ' ') {
-				++part;
-				i = 0;
-			}
-			break;
-		case 3:			/* Copy MAC address */
-			if (*p == ' ') {
-				++part;
-				i = 0;
-				break;
-			}
-			hw->ethaddr[i++] = *p;
-			if ((i % 3) == 2)
-				hw->ethaddr[i++] = ':';
-			break;
-
-		}
-		p++;
-	}
-
-	hw->busclk_real_ok = search_real_busclk (&hw->busclk_real);
-	return 0;
-}
-
-#if defined(CONFIG_GET_CPU_STR_F)
-/* !! This routine runs from Flash */
-char get_cpu_str_f (char *buf)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-	int	i = 0;
-
-	buf[i++] = 'M';
-	buf[i++] = 'P';
-	buf[i++] = 'C';
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
-		buf[i++] = *&p[3];
-		buf[i++] = *&p[4];
-		buf[i++] = *&p[5];
-		buf[i++] = *&p[6];
-	} else {
-		buf[i++] = '8';
-		buf[i++] = '2';
-		buf[i++] = '7';
-		buf[i++] = 'x';
-	}
-	buf[i++] = 0;
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-/* !! This routine runs from Flash */
-unsigned long board_get_cpu_clk_f (void)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-	int i = 0;
-
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
-		if (search_real_busclk (&i))
-			return i;
-	}
-	return CONFIG_8260_CLKIN;
-}
-#endif
-
-#if CONFIG_BOARD_EARLY_INIT_R
-
-static int can_test (unsigned long off)
-{
-	volatile unsigned char	*base	= (unsigned char *) (CFG_CAN_BASE + off);
-
-	*(base + 0x17) = 'T';
-	*(base + 0x18) = 'Q';
-	*(base + 0x19) = 'M';
-	if ((*(base + 0x17) != 'T') ||
-	    (*(base + 0x18) != 'Q') ||
-	    (*(base + 0x19) != 'M')) {
-		return 0;
-	}
-	return 1;
-}
-
-static int can_config_one (unsigned long off)
-{
-	volatile unsigned char	*ctrl	= (unsigned char *) (CFG_CAN_BASE + off);
-	volatile unsigned char	*cpu_if = (unsigned char *) (CFG_CAN_BASE + off + 0x02);
-	volatile unsigned char	*clkout = (unsigned char *) (CFG_CAN_BASE + off + 0x1f);
-	unsigned char temp;
-
-	*cpu_if = 0x45;
-	temp = *ctrl;
-	temp |= 0x40;
-	*ctrl	= temp;
-	*clkout = 0x20;
-	temp = *ctrl;
-	temp &= ~0x40;
-	*ctrl	= temp;
-	return 0;
-}
-
-static int can_config (void)
-{
-	int	ret = 0;
-	can_config_one (0);
-	if (hwinf.can == 2) {
-		can_config_one (0x100);
-	}
-	/* make Test if they really there */
-	ret += can_test (0);
-	ret += can_test (0x100);
-	return ret;
-}
-
-static int init_can (void)
-{
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	int	count = 0;
-
-	if ((hwinf.OK) && (hwinf.can)) {
-		memctl->memc_or4 = CFG_CAN_OR;
-		memctl->memc_br4 = CFG_CAN_BR;
-		/* upm Init */
-		upmconfig (UPMC, (uint *) upmTableFast,
-			   sizeof (upmTableFast) / sizeof (uint));
-		memctl->memc_mcmr =	(MxMR_DSx_3_CYCL |
-					MxMR_GPL_x4DIS |
-					MxMR_RLFx_2X |
-					MxMR_WLFx_2X |
-					MxMR_OP_NORM);
-		/* can configure */
-		count = can_config ();
-		printf ("CAN:	%d @ %x\n", count, CFG_CAN_BASE);
-		if (hwinf.can != count) printf("!!! difference to HWIB\n");
-	} else {
-		printf ("CAN:	No\n");
-	}
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	analyse_hwib ();
-	init_can ();
-	return 0;
-}
-#endif
-
-int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	dump_hwib ();
-	return 0;
-}
-
-U_BOOT_CMD(
-	  hwib, 1,	1,	do_hwib_dump,
-	  "hwib	   - dump HWIB'\n",
-	  "\n"
-);
-
-#ifdef CFG_UPDATE_FLASH_SIZE
-static int get_flash_timing (void)
-{
-	/* get it from the option -tf in CIB */
-	/* default is 0x00000c84 */
-	int	ret = 0x00000c84;
-	int	pos = 0;
-	int	nr = 0;
-	char	*p = (char *) CIB_INFO_START_ADDR;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return ret;
-		}
-		if (*p == '-') {
-			if ((p[1] == 't') && (p[2] == 'f')) {
-				p += 6;
-				ret = 0;
-				while (nr < 8) {
-				if ((*p >= '0') && (*p <= '9')) {
-					ret *= 0x10;
-					ret += *p - '0';
-					p += 1;
-					nr ++;
-				} else if ((*p >= 'A') && (*p <= 'F')) {
-					ret *= 10;
-					ret += *p - '7';
-					p += 1;
-					nr ++;
-				} else {
-					if (nr < 8) return 0x00000c84;
-					return ret;
-				}
-				}
-			}
-		}
-		p++;
-		pos++;
-	}
-	return ret;
-}
-
-/* Update the Flash_Size and the Flash Timing */
-int update_flash_size (int flash_size)
-{
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	unsigned long reg;
-	unsigned long tim;
-
-	/* I must use reg, otherwise the board hang */
-	reg = memctl->memc_or0;
-	reg &= ~ORxU_AM_MSK;
-	reg |= MEG_TO_AM(flash_size >> 20);
-	tim = get_flash_timing ();
-	reg &= ~0xfff;
-	reg |= (tim & 0xfff);
-	memctl->memc_or0 = reg;
-	return 0;
-}
-#endif
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-
-#include <nand.h>
-#include <linux/mtd/mtd.h>
-
-static u8 hwctl = 0;
-
-static void upmnand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
-{
-	switch (cmd) {
-	case NAND_CTL_SETCLE:
-		hwctl |= 0x1;
-		break;
-	case NAND_CTL_CLRCLE:
-		hwctl &= ~0x1;
-		break;
-
-	case NAND_CTL_SETALE:
-		hwctl |= 0x2;
-		break;
-
-	case NAND_CTL_CLRALE:
-		hwctl &= ~0x2;
-		break;
-	}
-}
-
-static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-
-	if (hwctl & 0x1) {
-		WRITE_NAND_UPM(byte, base, CFG_NAND_UPM_WRITE_CMD_OFS);
-	} else if (hwctl & 0x2) {
-		WRITE_NAND_UPM(byte, base, CFG_NAND_UPM_WRITE_ADDR_OFS);
-	} else {
-		WRITE_NAND(byte, base);
-	}
-}
-
-static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-
-	return READ_NAND(base);
-}
-
-static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
-{
-	/* constant delay (see also tR in the datasheet) */
-	udelay(12); \
-	return 1;
-}
-
-#ifndef CONFIG_NAND_SPL
-static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		buf[i] = *base;
-}
-
-static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		*base = buf[i];
-}
-
-static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != *base)
-			return -1;
-	return 0;
-}
-#endif /* #ifndef CONFIG_NAND_SPL */
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	chipsel = chip;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	static	int	UpmInit = 0;
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-
-	if (hwinf.nand == 0) return -1;
-
-	/* Setup the UPM */
-	if (UpmInit == 0) {
-		switch (hwinf.busclk_real) {
-		case 100000000:
-			upmconfig (UPMB, (uint *) upmTable100,
-			   sizeof (upmTable100) / sizeof (uint));
-			break;
-		case 133333333:
-			upmconfig (UPMB, (uint *) upmTable133,
-			   sizeof (upmTable133) / sizeof (uint));
-			break;
-		default:
-			upmconfig (UPMB, (uint *) upmTable67,
-			   sizeof (upmTable67) / sizeof (uint));
-			break;
-		}
-		UpmInit = 1;
-	}
-
-	/* Setup the memctrl */
-	memctl->memc_or3 = CFG_NAND_OR;
-	memctl->memc_br3 = CFG_NAND_BR;
-	memctl->memc_mbmr = (MxMR_OP_NORM);
-
-	nand->eccmode = NAND_ECC_SOFT;
-
-	nand->hwcontrol	 = upmnand_hwcontrol;
-	nand->read_byte	 = upmnand_read_byte;
-	nand->write_byte = upmnand_write_byte;
-	nand->dev_ready	 = tqm8272_dev_ready;
-
-#ifndef CONFIG_NAND_SPL
-	nand->write_buf	 = tqm8272_write_buf;
-	nand->read_buf	 = tqm8272_read_buf;
-	nand->verify_buf = tqm8272_verify_buf;
-#endif
-
-	/*
-	 * Select required NAND chip
-	 */
-	board_nand_select_device(nand, 0);
-	return 0;
-}
-
-#endif	/* CFG_CMD_NAND */
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-int board_early_init_f (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-	immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
-	return 0;
-}
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc8250_init(&hose);
-}
-#endif
diff --git a/board/tqm8272/u-boot.lds b/board/tqm8272/u-boot.lds
deleted file mode 100644
index 05f29c6ed0..0000000000
--- a/board/tqm8272/u-boot.lds
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    common/environment.o(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/tqm834x/Makefile b/board/tqm834x/Makefile
deleted file mode 100644
index 4c0d20417e..0000000000
--- a/board/tqm834x/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o pci.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/tqm834x/config.mk b/board/tqm834x/config.mk
deleted file mode 100644
index f172c4ede0..0000000000
--- a/board/tqm834x/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE   =   0x80000000
diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c
deleted file mode 100644
index 7bfe7c9288..0000000000
--- a/board/tqm834x/pci.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <asm/mmu.h>
-#include <common.h>
-#include <pci.h>
-
-#ifdef CONFIG_PCI
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_tqm834x_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
- 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-		}
-	},
-	{}
-};
-#endif
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_tqm834x_config_table,
-#endif
-};
-
-
-/**************************************************************************
- * pci_init_board()
- *
- * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since
- * per TQM834x design physical connections to external devices (PCI sockets)
- * are routed only to the PCI1 we do not account for the second one - this code
- * supports PCI1 module only. Should support for the PCI2 be required in the
- * future it needs a separate pci_controller structure (above) and handling -
- * please refer to other boards' implementation for dual PCI host controllers,
- * for example board/Marvell/db64360/pci.c, pci_init_board()
- *
- */
-void
-pci_init_board(void)
-{
-	volatile immap_t *	immr;
-	volatile clk83xx_t *	clk;
-	volatile law83xx_t *	pci_law;
-	volatile pot83xx_t *	pci_pot;
-	volatile pcictrl83xx_t *	pci_ctrl;
-	volatile pciconf83xx_t *	pci_conf;
-	u16 reg16;
-	u32 reg32;
-	struct	pci_controller * hose;
-
-	immr = (immap_t *)CFG_IMMR;
-	clk = (clk83xx_t *)&immr->clk;
-	pci_law = immr->sysconf.pcilaw;
-	pci_pot = immr->ios.pot;
-	pci_ctrl = immr->pci_ctrl;
-	pci_conf = immr->pci_conf;
-
-	hose = &pci1_hose;
-
-	/*
-	 * Configure PCI controller and PCI_CLK_OUTPUT
-	 */
-
-	/*
-	 * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
-	 * line actually used for clocking all external PCI devices in TQM83xx.
-	 * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
-	 * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
-	 * are known to hang the board; this issue is under investigation
-	 * (13 oct 05)
-	 */
-	reg32 = OCCR_PCICOE1;
-	if (clk->spmr & SPMR_CKID) {
-		/* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
-		 * fields accordingly */
-		reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
-
-		reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
-			  | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
-			  | OCCR_PCICD6 | OCCR_PCICD7);
-	}
-
-	clk->occr = reg32;
-	udelay(2000);
-
-	/*
-	 * Release PCI RST Output signal
-	 */
-	pci_ctrl[0].gcr = 0;
-	udelay(2000);
-	pci_ctrl[0].gcr = 1;
-	udelay(2000);
-
-	/*
-	 * Configure PCI Local Access Windows
-	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
-
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
-
-	/*
-	 * Configure PCI Outbound Translation Windows
-	 */
-
-	/* PCI1 mem space */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
-
-	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
-	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-
-	/* we need RAM mapped to PCI space for the devices to
-	 * access main memory */
-	pci_ctrl[0].pitar1 = 0x0;
-	pci_ctrl[0].pibar1 = 0x0;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	/* PCI memory space */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE,
-		       PCI_REGION_MEM);
-
-	/* PCI IO space */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS,
-		       CFG_PCI1_IO_SIZE,
-		       PCI_REGION_IO);
-
-	/* System memory space */
-	pci_set_region(hose->regions + 2,
-		       CONFIG_PCI_SYS_MEM_BUS,
-		       CONFIG_PCI_SYS_MEM_PHYS,
-		       CONFIG_PCI_SYS_MEM_SIZE,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	hose->region_count = 3;
-
-	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8300),
-			   (CFG_IMMR+0x8304));
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND,
-					&reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND,
-					reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS,
-					0xffff);
-	pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER,
-					0x80);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
deleted file mode 100644
index 36d901f094..0000000000
--- a/board/tqm834x/tqm834x.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#include <spd.h>
-#include <miiphy.h>
-#include <asm-ppc/mmu.h>
-#include <pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define IOSYNC			asm("eieio")
-#define ISYNC			asm("isync")
-#define SYNC			asm("sync")
-#define FPW			FLASH_PORT_WIDTH
-#define FPWV			FLASH_PORT_WIDTHV
-
-#define DDR_MAX_SIZE_PER_CS	0x20000000
-
-#if defined(DDR_CASLAT_20)
-#define TIMING_CASLAT		TIMING_CFG1_CASLAT_20
-#define MODE_CASLAT		DDR_MODE_CASLAT_20
-#else
-#define TIMING_CASLAT		TIMING_CFG1_CASLAT_25
-#define MODE_CASLAT		DDR_MODE_CASLAT_25
-#endif
-
-#define INITIAL_CS_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_12 | \
-				CSCONFIG_COL_BIT_9)
-
-/* Global variable used to store detected number of banks */
-int tqm834x_num_flash_banks;
-
-/* External definitions */
-ulong flash_get_size (ulong base, int banknum);
-extern flash_info_t flash_info[];
-extern long spd_sdram (void);
-
-/* Local functions */
-static int detect_num_flash_banks(void);
-static long int get_ddr_bank_size(short cs, volatile long *base);
-static void set_cs_bounds(short cs, long base, long size);
-static void set_cs_config(short cs, long config);
-static void set_ddr_config(void);
-
-/* Local variable */
-static volatile immap_t *im = (immap_t *)CFG_IMMR;
-
-/**************************************************************************
- * Board initialzation after relocation to RAM. Used to detect the number
- * of Flash banks on TQM834x.
- */
-int board_early_init_r (void) {
-	/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return 0;
-
-	/* detect the number of Flash banks */
-	return detect_num_flash_banks();
-}
-
-/**************************************************************************
- * DRAM initalization and size detection
- */
-long int initdram (int board_type)
-{
-	long bank_size;
-	long size;
-	int cs;
-
-	/* during size detection, set up the max DDRLAW size */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE;
-	im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
-
-	/* set CS bounds to maximum size */
-	for(cs = 0; cs < 4; ++cs) {
-		set_cs_bounds(cs,
-			CFG_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
-			DDR_MAX_SIZE_PER_CS);
-
-		set_cs_config(cs, INITIAL_CS_CONFIG);
-	}
-
-	/* configure ddr controller */
-	set_ddr_config();
-
-	udelay(200);
-
-	/* enable DDR controller */
-	im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
-		SDRAM_CFG_SREN |
-		SDRAM_CFG_SDRAM_TYPE_DDR);
-	SYNC;
-
-	/* size detection */
-	debug("\n");
-	size = 0;
-	for(cs = 0; cs < 4; ++cs) {
-		debug("\nDetecting Bank%d\n", cs);
-
-		bank_size = get_ddr_bank_size(cs,
-			(volatile long*)(CFG_DDR_BASE + size));
-		size += bank_size;
-
-		debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20);
-
-		/* exit if less than one bank */
-		if(size < DDR_MAX_SIZE_PER_CS) break;
-	}
-
-	return size;
-}
-
-/**************************************************************************
- * checkboard()
- */
-int checkboard (void)
-{
-	puts("Board: TQM834x\n");
-
-#ifdef CONFIG_PCI
-	volatile immap_t * immr;
-	u32 w, f;
-
-	immr = (immap_t *)CFG_IMMR;
-	if (!(immr->reset.rcwh & RCWH_PCIHOST)) {
-		printf("PCI:   NOT in host mode..?!\n");
-		return 0;
-	}
-
-	/* get bus width */
-	w = 32;
-	if (immr->reset.rcwh & RCWH_PCI64)
-		w = 64;
-
-	/* get clock */
-	f = gd->pci_clk;
-
-	printf("PCI1:  %d bit, %d MHz\n", w, f / 1000000);
-#else
-	printf("PCI:   disabled\n");
-#endif
-	return 0;
-}
-
-
-/**************************************************************************
- *
- * Local functions
- *
- *************************************************************************/
-
-/**************************************************************************
- * Detect the number of flash banks (1 or 2). Store it in
- * a global variable tqm834x_num_flash_banks.
- * Bank detection code based on the Monitor code.
- */
-static int detect_num_flash_banks(void)
-{
-	typedef unsigned long FLASH_PORT_WIDTH;
-	typedef volatile unsigned long FLASH_PORT_WIDTHV;
-	FPWV *bank1_base;
-	FPWV *bank2_base;
-	FPW bank1_read;
-	FPW bank2_read;
-	ulong bank1_size;
-	ulong bank2_size;
-	ulong total_size;
-
-	tqm834x_num_flash_banks = 2;	/* assume two banks */
-
-	/* Get bank 1 and 2 information */
-	bank1_size = flash_get_size(CFG_FLASH_BASE, 0);
-	debug("Bank1 size: %lu\n", bank1_size);
-	bank2_size = flash_get_size(CFG_FLASH_BASE + bank1_size, 1);
-	debug("Bank2 size: %lu\n", bank2_size);
-	total_size = bank1_size + bank2_size;
-
-	if (bank2_size > 0) {
-		/* Seems like we've got bank 2, but maybe it's mirrored 1 */
-
-		/* Set the base addresses */
-		bank1_base = (FPWV *) (CFG_FLASH_BASE);
-		bank2_base = (FPWV *) (CFG_FLASH_BASE + bank1_size);
-
-		/* Put bank 2 into CFI command mode and read */
-		bank2_base[0x55] = 0x00980098;
-		IOSYNC;
-		ISYNC;
-		bank2_read = bank2_base[0x10];
-
-		/* Read from bank 1 (it's in read mode) */
-		bank1_read = bank1_base[0x10];
-
-		/* Reset Flash */
-		bank1_base[0] = 0x00F000F0;
-		bank2_base[0] = 0x00F000F0;
-
-		if (bank2_read == bank1_read) {
-			/*
-			 * Looks like just one bank, but not sure yet. Let's
-			 * read from bank 2 in autosoelect mode.
-			 */
-			bank2_base[0x0555] = 0x00AA00AA;
-			bank2_base[0x02AA] = 0x00550055;
-			bank2_base[0x0555] = 0x00900090;
-			IOSYNC;
-			ISYNC;
-			bank2_read = bank2_base[0x10];
-
-			/* Read from bank 1 (it's in read mode) */
-			bank1_read = bank1_base[0x10];
-
-			/* Reset Flash */
-			bank1_base[0] = 0x00F000F0;
-			bank2_base[0] = 0x00F000F0;
-
-			if (bank2_read == bank1_read) {
-				/*
-				 * In both CFI command and autoselect modes,
-				 * we got the some data reading from Flash.
-				 * There is only one mirrored bank.
-				 */
-				tqm834x_num_flash_banks = 1;
-				total_size = bank1_size;
-			}
-		}
-	}
-
-	debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
-
-	/* set OR0 and BR0 */
-	im->lbus.bank[0].or = CFG_OR_TIMING_FLASH |
-		(-(total_size) & OR_GPCM_AM);
-	im->lbus.bank[0].br = (CFG_FLASH_BASE & BR_BA) |
-		(BR_MS_GPCM | BR_PS_32 | BR_V);
-
-	return (0);
-}
-
-/*************************************************************************
- * Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
- */
-static long int get_ddr_bank_size(short cs, volatile long *base)
-{
-	/* This array lists all valid DDR SDRAM configurations, with
-	 * Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
-	 * The last entry has to to have size equal 0 and is igonred during
-	 * autodection. Bank sizes must be in increasing order of size
-	 */
-	struct {
-		long row;
-		long col;
-		long size;
-	} conf[] = {
-		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_8,	32 << 20},
-		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_9,	64 << 20},
-		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_10,	128 << 20},
-		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_9,	128 << 20},
-		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_10,	256 << 20},
-		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_11,	512 << 20},
-		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_10,	512 << 20},
-		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_11,	1024 << 20},
-		{0,			0,			0}
-	};
-
-	int i;
-	int detected;
-	long size;
-
-	detected = -1;
-	for(i = 0; conf[i].size != 0; ++i) {
-
-		/* set sdram bank configuration */
-		set_cs_config(cs, CSCONFIG_EN | conf[i].col | conf[i].row);
-
-		debug("Getting RAM size...\n");
-		size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);
-
-		if((size == conf[i].size) && (i == detected + 1))
-			detected = i;
-
-		debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
-			conf[i].row,
-			conf[i].col,
-			conf[i].size >> 20,
-			base,
-			size >> 20);
-	}
-
-	if(detected == -1){
-		/* disable empty cs */
-		debug("\nNo valid configurations for CS%d, disabling...\n", cs);
-		set_cs_config(cs, 0);
-		return 0;
-	}
-
-	debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
-			conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
-
-	/* configure cs ro detected params */
-	set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
-			conf[detected].col);
-
-	set_cs_bounds(cs, (long)base, conf[detected].size);
-
-	return(conf[detected].size);
-}
-
-/**************************************************************************
- * Sets DDR bank CS bounds.
- */
-static void set_cs_bounds(short cs, long base, long size)
-{
-	debug("Setting bounds %08x, %08x for cs %d\n", base, size, cs);
-	if(size == 0){
-		im->ddr.csbnds[cs].csbnds = 0x00000000;
-	} else {
-		im->ddr.csbnds[cs].csbnds =
-			((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-			(((base + size - 1) >> CSBNDS_EA_SHIFT) &
-				CSBNDS_EA);
-	}
-	SYNC;
-}
-
-/**************************************************************************
- * Sets DDR banks CS configuration.
- * config == 0x00000000 disables the CS.
- */
-static void set_cs_config(short cs, long config)
-{
-	debug("Setting config %08x for cs %d\n", config, cs);
-	im->ddr.cs_config[cs] = config;
-	SYNC;
-}
-
-/**************************************************************************
- * Sets DDR clocks, timings and configuration.
- */
-static void set_ddr_config(void) {
-	/* clock control */
-	im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
-		DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
-	SYNC;
-
-	/* timing configuration */
-	im->ddr.timing_cfg_1 =
-		(4 << TIMING_CFG1_PRETOACT_SHIFT) |
-		(7 << TIMING_CFG1_ACTTOPRE_SHIFT) |
-		(4 << TIMING_CFG1_ACTTORW_SHIFT)  |
-		(5 << TIMING_CFG1_REFREC_SHIFT)   |
-		(3 << TIMING_CFG1_WRREC_SHIFT)    |
-		(3 << TIMING_CFG1_ACTTOACT_SHIFT) |
-		(1 << TIMING_CFG1_WRTORD_SHIFT)   |
-		(TIMING_CFG1_CASLAT & TIMING_CASLAT);
-
-	im->ddr.timing_cfg_2 =
-		TIMING_CFG2_CPO_DEF |
-		(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
-	SYNC;
-
-	/* don't enable DDR controller yet */
-	im->ddr.sdram_cfg =
-		SDRAM_CFG_SREN |
-		SDRAM_CFG_SDRAM_TYPE_DDR;
-	SYNC;
-
-	/* Set SDRAM mode */
-	im->ddr.sdram_mode =
-		((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
-			SDRAM_MODE_ESD_SHIFT) |
-		((DDR_MODE_MODEREG | DDR_MODE_BLEN_4) <<
-			SDRAM_MODE_SD_SHIFT) |
-		((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
-			MODE_CASLAT);
-	SYNC;
-
-	/* Set fast SDRAM refresh rate */
-	im->ddr.sdram_interval =
-		(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
-		(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
-	SYNC;
-
-	/* Workaround for DDR6 Erratum
-	 * see MPC8349E Device Errata Rev.8, 2/2006
-	 * This workaround influences the MPC internal "input enables"
-	 * dependent on CAS latency and MPC revision. According to errata
-	 * sheet the internal reserved registers for this workaround are
-	 * not available from revision 2.0 and up.
-	 */
-
-	/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
-	 * (0x200)
-	 */
-	if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
-
-		/* There is a internal reserved register at IMMRBAR+0x2F00
-		 * which has to be written with a certain value defined by
-		 * errata sheet.
-		 */
-		u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
-
-#if defined(DDR_CASLAT_20)
-		*reserved_p = 0x201c0000;
-#else
-		*reserved_p = 0x202c0000;
-#endif
-	}
-}
diff --git a/board/tqm834x/u-boot.lds b/board/tqm834x/u-boot.lds
deleted file mode 100644
index 020cfa66f8..0000000000
--- a/board/tqm834x/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc83xx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile
deleted file mode 100644
index cad7e1e1ed..0000000000
--- a/board/tqm85xx/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o sdram.o
-SOBJS	:= init.o
-#SOBJS	:=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/tqm85xx/config.mk b/board/tqm85xx/config.mk
deleted file mode 100644
index 52e84ad772..0000000000
--- a/board/tqm85xx/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright 2004 Freescale Semiconductor.
-# Modified by Xianghua Xiao, X.Xiao@motorola.com
-# (C) Copyright 2002,Motorola Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# tqm85xx board
-# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 256k
-#
-TEXT_BASE = 0xfffc0000
diff --git a/board/tqm85xx/init.S b/board/tqm85xx/init.S
deleted file mode 100644
index 1f610385e6..0000000000
--- a/board/tqm85xx/init.S
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
-	mflr	r1	;	\
-	bl	0f	;
-
-#define entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0, 1:	128M	Non-cacheable, guarded
-	 * 0xf8000000	128M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE+0x4000000), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE+0x4000000), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7+8:	512M	DDR, cache disabled (needed for memory test)
-	 * 0x00000000  512M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-	.long TLB1_MAS0(1, 8, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE+0x10000000), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE+0x10000000), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
- * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
- * 0xc000_0000	   0xdfff_ffff	   RapidIO		   512M
- * 0xe000_0000	   0xe000_ffff	   CCSR			   1M
- * 0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
- * 0xf800_0000	   0xf80f_ffff	   BCSR			   1M
- * 0xfe00_0000	   0xffff_ffff	   FLASH (boot bank)	   32M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_LBC_FLASH_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-	.long 0x05
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4
-	entry_end
diff --git a/board/tqm85xx/sdram.c b/board/tqm85xx/sdram.c
deleted file mode 100644
index 9c1f087687..0000000000
--- a/board/tqm85xx/sdram.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <spd.h>
-
-struct sdram_conf_s {
-	unsigned long size;
-	unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-sdram_conf_t ddr_cs_conf[] = {
-	{(512 << 20), 0x80000202},	/* 512MB, 14x10(4)	*/
-	{(256 << 20), 0x80000102},	/* 256MB, 13x10(4)	*/
-	{(128 << 20), 0x80000101},	/* 128MB, 13x9(4)	*/
-	{(64  << 20), 0x80000001},	/* 64MB,  12x9(4)	*/
-};
-
-#define	N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency(void);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- *       so this should be extended for other future boards
- *       using this routine!
- */
-long int sdram_setup(int casl)
-{
-	int i;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr;
-	unsigned long cfg_ddr_timing1;
-	unsigned long cfg_ddr_mode;
-
-	/*
-	 * Disable memory controller.
-	 */
-	ddr->cs0_config = 0;
-	ddr->sdram_cfg = 0;
-
-	switch (casl) {
-	case 20:
-		cfg_ddr_timing1 = 0x47405331 | (3 << 16);
-		cfg_ddr_mode = 0x40020002 | (2 << 4);
-		break;
-
-	case 25:
-		cfg_ddr_timing1 = 0x47405331 | (4 << 16);
-		cfg_ddr_mode = 0x40020002 | (6 << 4);
-		break;
-
-	case 30:
-	default:
-		cfg_ddr_timing1 = 0x47405331 | (5 << 16);
-		cfg_ddr_mode = 0x40020002 | (3 << 4);
-		break;
-	}
-
-	ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
-	ddr->cs0_config = ddr_cs_conf[0].reg;
-	ddr->timing_cfg_1 = cfg_ddr_timing1;
-	ddr->timing_cfg_2 = 0x00000800;		/* P9-45,may need tuning */
-	ddr->sdram_mode = cfg_ddr_mode;
-	ddr->sdram_interval = 0x05160100;	/* autocharge,no open page */
-	ddr->err_disable = 0x0000000D;
-
-	asm ("sync;isync;msync");
-	udelay(1000);
-
-	ddr->sdram_cfg = 0xc2000000;		/* unbuffered,no DYN_PWR */
-	asm ("sync; isync; msync");
-	udelay(1000);
-
-	for (i=0; i<N_DDR_CS_CONF; i++) {
-		ddr->cs0_config = ddr_cs_conf[i].reg;
-
-		if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) {
-			/*
-			 * OK, size detected -> all done
-			 */
-			return ddr_cs_conf[i].size;
-		}
-	}
-
-	return 0;				/* nothing found !		*/
-}
-
-void board_add_ram_info(int use_default)
-{
-	int casl;
-
-	if (use_default)
-		casl = CONFIG_DDR_DEFAULT_CL;
-	else
-		casl = cas_latency();
-
-	puts(" (CL=");
-	switch (casl) {
-	case 20:
-		puts("2)");
-		break;
-
-	case 25:
-		puts("2.5)");
-		break;
-
-	case 30:
-		puts("3)");
-		break;
-	}
-}
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-	int casl;
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * This DLL-Override only used on TQM8540 and TQM8560
-	 */
-	{
-		volatile immap_t *immap = (immap_t *) CFG_IMMR;
-		volatile ccsr_gur_t *gur= &immap->im_gur;
-		int i,x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm("sync;isync;msync");
-			for (i=0; i<x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm("sync;isync;msync");
-			x++;
-		}
-	}
-#endif
-
-	casl = cas_latency();
-	dram_size = sdram_setup(casl);
-	if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
-		/*
-		 * Try again with default CAS latency
-		 */
-		puts("Problem with CAS lantency");
-		board_add_ram_info(1);
-		puts(", using default CL!\n");
-		casl = CONFIG_DDR_DEFAULT_CL;
-		dram_size = sdram_setup(casl);
-		puts("       ");
-	}
-
-	return dram_size;
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test passed.\n");
-	return 0;
-}
-#endif
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
deleted file mode 100644
index 256c076c7d..0000000000
--- a/board/tqm85xx/tqm85xx.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[];	/* FLASH chips info */
-
-void local_bus_init (void);
-long int fixed_sdram (void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init(void);
-#endif
-
-#ifdef CONFIG_CPM2
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
-	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
-	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
-	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
-	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
-	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
-	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
-	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
-	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
-	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
-	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1] */
-	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
-	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* PC17 */
-	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   0,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   1,   0,   0,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   0,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   1,   1,   0,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-#endif /*  CONFIG_CPM2 */
-
-#define CASL_STRING1	"casl=xx"
-#define CASL_STRING2	"casl="
-
-static const int casl_table[] = { 20, 25, 30 };
-#define	N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
-
-int cas_latency(void)
-{
-	char *s = getenv("serial#");
-	int casl;
-	int val;
-	int i;
-
-	casl = CONFIG_DDR_DEFAULT_CL;
-
-	if (s != NULL) {
-		if (strncmp(s + strlen(s) - strlen(CASL_STRING1), CASL_STRING2,
-			    strlen(CASL_STRING2)) == 0) {
-			val = simple_strtoul(s + strlen(s) - 2, NULL, 10);
-
-			for (i=0; i<N_CASL; ++i) {
-				if (val == casl_table[i]) {
-					return val;
-				}
-			}
-		}
-	}
-
-	return casl;
-}
-
-int checkboard (void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: %s", CONFIG_BOARDNAME);
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-#ifdef CONFIG_PCI
-	printf ("PCI1:  32 bit, %d MHz (compiled)\n",
-		CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf ("PCI1:  disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
-	/*
-	 * Adjust flash start and offset to detected values
-	 */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Check if boot FLASH isn't max size
-	 */
-	if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
-		memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
-		memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
-
-		/*
-		 * Re-check to get correct base address
-		 */
-		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
-	}
-
-	/*
-	 * Check if only one FLASH bank is available
-	 */
-	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
-
-		/*
-		 * Re-do flash protection upon new addresses
-		 */
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Redundant environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR_REDUND,
-			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-	}
-
-	return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void local_bus_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info (&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-		lbc->ltedr = 0xa4c80000;	/* DK: !!! */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr ();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-		udelay (200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm ("sync;isync;msync");
-	}
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif /* CONFIG_PCI */
-
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init (&hose);
-#endif /* CONFIG_PCI */
-}
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_PS2MULT
-	ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
-	return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
diff --git a/board/tqm85xx/u-boot.lds b/board/tqm85xx/u-boot.lds
deleted file mode 100644
index 4cc825bcdb..0000000000
--- a/board/tqm85xx/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Xianghua Xiao, X.Xiao@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o (.bootpg)
-    board/tqm85xx/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash		 : { *(.hash)		}
-  .dynsym	 : { *(.dynsym)		}
-  .dynstr	 : { *(.dynstr)		}
-  .rel.text	 : { *(.rel.text)		}
-  .rela.text	 : { *(.rela.text)	}
-  .rel.data	 : { *(.rel.data)		}
-  .rela.data	 : { *(.rela.data)	}
-  .rel.rodata	 : { *(.rel.rodata)	}
-  .rela.rodata	 : { *(.rela.rodata)	}
-  .rel.got	 : { *(.rel.got)		}
-  .rela.got	 : { *(.rela.got)		}
-  .rel.ctors	 : { *(.rel.ctors)	}
-  .rela.ctors	 : { *(.rela.ctors)	}
-  .rel.dtors	 : { *(.rel.dtors)	}
-  .rela.dtors	 : { *(.rela.dtors)	}
-  .rel.bss	 : { *(.rel.bss)		}
-  .rela.bss	 : { *(.rela.bss)		}
-  .rel.plt	 : { *(.rel.plt)		}
-  .rela.plt	 : { *(.rela.plt)		}
-  .init		 : { *(.init)	}
-  .plt : { *(.plt) }
-  .text	     :
-  {
-    cpu/mpc85xx/start.o (.text)
-    board/tqm85xx/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini	     : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data	   :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss	     :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/uc100/Makefile b/board/uc100/Makefile
deleted file mode 100644
index 92ee091f68..0000000000
--- a/board/uc100/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-#COBJS	= $(BOARD).o flash.o pcmcia.o
-COBJS	= $(BOARD).o pcmcia.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/uc100/config.mk b/board/uc100/config.mk
deleted file mode 100644
index a65a8ba2c7..0000000000
--- a/board/uc100/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# UC100 boards
-#
-
-#TEXT_BASE = 0x40000000
-TEXT_BASE = 0x40700000
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
deleted file mode 100644
index 6e4b6d6c66..0000000000
--- a/board/uc100/pcmcia.c
+++ /dev/null
@@ -1,198 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef	CONFIG_PCMCIA
-
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CONFIG_PCMCIA
-#endif
-
-#ifdef	CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "UC100"
-
-/*
- * Remark: don't turn off OE "__MY_PCMCIA_GCRX_CXOE" on UC100 board.
- *         This leads to board-hangup! (sr, 8 Dez. 2004)
- */
-static void cfg_ports (void)
-{
-	volatile immap_t	*immap;
-
-	immap = (immap_t *)CFG_IMMR;
-
-	/*
-	* Configure Port A for MAX1602 PC-Card Power-Interface Switch
-	*/
-	immap->im_ioport.iop_padat &= ~0x8000;	/* set port x output to low */
-	immap->im_ioport.iop_padir |= 0x8000;	/* enable port x as output */
-
-	debug ("Set Port A: PAR: %08x DIR: %08x DAT: %08x\n",
-	       immap->im_ioport.iop_papar, immap->im_ioport.iop_padir,
-	       immap->im_ioport.iop_padat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/*
-	* Configure SIUMCR to enable PCMCIA port B
-	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	*/
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	* Disable interrupts, DMA, and PCMCIA buffers
-	* (isolate the interface) and assert RESET signal
-	*/
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	* Make sure there is a card in the slot, then configure the interface.
-	*/
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-	       __LINE__,__FUNCTION__,
-	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	* Power On.
-	*/
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-	       reg,
-	       (reg&PCMCIA_VS1(slot))?"n":"ff",
-	       (reg&PCMCIA_VS2(slot))?"n":"ff");
-	if ((reg & mask) == mask) {
-		puts (" 5.0V card found: ");
-	} else {
-		puts (" 3.3V card found: ");
-	}
-
-	/*  switch VCC on */
-	immap->im_ioport.iop_padat |= 0x8000; /* power enable 3.3V */
-
-	udelay(10000);
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* switch VCC off */
-	immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-			PCMCIA_BOARD_MSG
-			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	* Disable PCMCIA buffers (isolate the interface)
-	* and assert RESET signal
-	*/
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	* Configure Port C pins for
-	* 5 Volts Enable and 3 Volts enable,
-	* Turn all power pins to Hi-Z
-	*/
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-	       slot+'A');
-	return (0);
-}
-
-#endif	/* CONFIG_PCMCIA */
diff --git a/board/uc100/u-boot.lds b/board/uc100/u-boot.lds
deleted file mode 100644
index d7c798ebb6..0000000000
--- a/board/uc100/u-boot.lds
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/traps.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-    lib_ppc/cache.o		(.text)
-    lib_ppc/time.o		(.text)
-
-    common/environment.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/uc100/u-boot.lds.debug b/board/uc100/u-boot.lds.debug
deleted file mode 100644
index d9bb868363..0000000000
--- a/board/uc100/u-boot.lds.debug
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c
deleted file mode 100644
index 8ea6462421..0000000000
--- a/board/uc100/uc100.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <i2c.h>
-#include <miiphy.h>
-
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value);
-
-/*********************************************************************/
-/* UPMA Pre Initilization Table by WV (Miron MT48LC16M16A2-7E B)     */
-/*********************************************************************/
-const uint sdram_init_upm_table[] = {
-	/* SDRAM Initialisation Sequence (offset 0 in UPMA RAM) WV */
-	/* NOP    - Precharge - AutoRefr  - NOP       - NOP        */
-	/* NOP    - AutoRefr  - NOP                                */
-	/* NOP    - NOP       - LoadModeR - NOP       - Active     */
-	/* Position of Single Read                                 */
-	0x0ffffc04, 0x0ff77c04, 0x0ff5fc04, 0x0ffffc04, 0x0ffffc04,
-	0x0ffffc04, 0x0ff5fc04, 0x0ffffc04,
-
-	/* Burst Read. (offset 8 in UPMA RAM)     */
-	/* Cycle lent for Initialisation WV */
-	0x0ffffc04, 0x0ffffc34, 0x0f057c34, 0x0ffffc30, 0x1ff7fc05,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Single Write. (offset 18 in UPMA RAM) */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Burst Write. (offset 20 in UPMA RAM) */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Refresh  (offset 30 in UPMA RAM) */
-	0x0FF77C04, 0x0FFFFC04, 0x0FF5FC84, 0x0FFFFC04, 0x0FFFFC04,
-	0x0FFFFC84, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Exception. (offset 3c in UPMA RAM) */
-	0x7FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-};
-
-/*********************************************************************/
-/* UPMA initilization table.                                         */
-/*********************************************************************/
-const uint sdram_upm_table[] = {
-	/* single read. (offset 0 in UPMA RAM) */
-	0x0F07FC04, 0x0FFFFC04, 0x00BDFC04, 0x0FF77C00, 0x1FFFFC05,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,     /* 0x05-0x07 new WV */
-
-	/* Burst Read. (offset 8 in UPMA RAM) */
-	0x0F07FC04, 0x0FFFFC04, 0x00BDFC04, 0x00FFFC00, 0x00FFFC00,
-	0x00FFFC00, 0x0FF77C00, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Single Write. (offset 18 in UPMA RAM) */
-	0x0F07FC04, 0x0FFFFC00, 0x00BD7C04, 0x0FFFFC04, 0x0FF77C04,
-	0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Burst Write. (offset 20 in UPMA RAM) */
-	0x0F07FC04, 0x0FFFFC00, 0x00BD7C00, 0x00FFFC00, 0x00FFFC00,
-	0x00FFFC04, 0x0FFFFC04, 0x0FF77C04, 0x1FFFFC05, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Refresh  (offset 30 in UPMA RAM) */
-	0x0FF77C04, 0x0FFFFC04, 0x0FF5FC84, 0x0FFFFC04, 0x0FFFFC04,
-	0x0FFFFC84, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Exception. (offset 3c in UPMA RAM) */
-	0x7FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* 0x3C new WV */
-};
-
-/*********************************************************************/
-/* UPMB initilization table.                                         */
-/*********************************************************************/
-const uint mpm_upm_table[] = {
-	/*  single read. (offset 0 in upm RAM) */
-	0x8FF00004, 0x0FF00004, 0x0FF81004, 0x1FF00001,
-	0x1FF00001, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* burst read. (Offset 8 in upm RAM)   */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* single write. (Offset 0x18 in upm RAM) */
-	0x8FF00004, 0x0FF00004, 0x0FF81004, 0x0FF00004,
-	0x0FF00004, 0x1FF00001, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/*  burst write. (Offset 0x20 in upm RAM) */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Refresh cycle, offset 0x30 */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-	/* Exception, 0ffset 0x3C */
-	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-};
-
-
-int board_switch(void)
-{
-	volatile pcmconf8xx_t	*pcmp;
-
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	return ((pcmp->pcmc_pipr >> 24) & 0xf);
-}
-
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_r ("serial#", str, sizeof(str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming UC100");
-	} else {
-		puts(str);
-	}
-
-	printf (" (SWITCH=%1X)\n", board_switch());
-
-	return 0;
-}
-
-
-/*
- * Initialize SDRAM
- */
-long int initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/*---------------------------------------------------------------------*/
-	/* Initialize the UPMA/UPMB registers with the appropriate table.      */
-	/*---------------------------------------------------------------------*/
-	upmconfig (UPMA, (uint *) sdram_init_upm_table,
-		   sizeof (sdram_init_upm_table) / sizeof (uint));
-	upmconfig (UPMB, (uint *) mpm_upm_table,
-		   sizeof (mpm_upm_table) / sizeof (uint));
-
-	/*---------------------------------------------------------------------*/
-	/* Memory Periodic Timer Prescaler: divide by 16                       */
-	/*---------------------------------------------------------------------*/
-	memctl->memc_mptpr = 0x0200; /* Divide by 32 WV */
-
-	memctl->memc_mamr = CFG_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
-   	memctl->memc_mbmr = CFG_MBMR_VAL;
-
-	/*---------------------------------------------------------------------*/
-	/* Initialize the Memory Controller registers, MPTPR, Chip Select 1    */
-	/* for SDRAM                                                           */
-	/*                                                                     */
-	/* NOTE: The refresh rate in MAMR reg is set according to the lowest   */
-	/*       clock rate (16.67MHz) to allow proper operation for all ADS   */
-	/*       clock frequencies.                                            */
-	/*---------------------------------------------------------------------*/
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-
-	/*-------------------------------------------------------------------*/
-	/* Wait at least 200 usec for DRAM to stabilize, this magic number   */
-	/* obtained from the init code.                                      */
-	/*-------------------------------------------------------------------*/
-	udelay(200);
-
-	memctl->memc_mamr = (memctl->memc_mamr | 0x04) & ~0x08;
-
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-
-	/*---------------------------------------------------------------------*/
-	/* run MRS command in location 5-8 of UPMB.                            */
-	/*---------------------------------------------------------------------*/
-	memctl->memc_mar = 0x88;
-	/* RUN UPMA on CS1 1-time from UPMA addr 0x05 */
-
-	memctl->memc_mcr = 0x80002100;
-	/* RUN UPMA on CS1 1-time from UPMA addr 0x00 WV */
-
-	udelay(200);
-
-	/*---------------------------------------------------------------------*/
-	/* Initialisation for normal access WV                                 */
-	/*---------------------------------------------------------------------*/
-
-	/*---------------------------------------------------------------------*/
-	/* Initialize the UPMA register with the appropriate table.            */
-	/*---------------------------------------------------------------------*/
-	upmconfig (UPMA, (uint *) sdram_upm_table,
-		   sizeof (sdram_upm_table) / sizeof (uint));
-
-	/*---------------------------------------------------------------------*/
-	/* rerstore MBMR value (4-beat refresh burst.)                         */
-	/*---------------------------------------------------------------------*/
-	memctl->memc_mamr = CFG_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
-
-	udelay(200);
-
-	return (64 * 1024 * 1024); /* fixed setup for 64MBytes! */
-}
-
-
-int misc_init_r (void)
-{
-	uchar val;
-
-	/*
-	 * Make sure that RTC has clock output enabled (triggers watchdog!)
-	 */
-	val = i2c_reg_read (CFG_I2C_RTC_ADDR, 0x0D);
-	val |= 0x80;
-	i2c_reg_write (CFG_I2C_RTC_ADDR, 0x0D, val);
-
-	/*
-	 * Configure PHY to setup LED's correctly and use 100MBit, FD
-	 */
-	mii_init();
-
-	/* disable auto-negotiation, 100mbit, full-duplex */
-	fec8xx_miiphy_write(NULL, 0, PHY_BMCR, 0x2100);
-
-	/* set LED's to Link, Transmit, Receive           */
-	fec8xx_miiphy_write(NULL,  0, PHY_FCSCR, 0x4122);
-
-	return 0;
-}
-
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed (void)
-{
-	return 0;		/* No hotkeys supported */
-}
-#endif
diff --git a/board/v38b/Makefile b/board/v38b/Makefile
deleted file mode 100644
index b21bd6f6c5..0000000000
--- a/board/v38b/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o ethaddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/v38b/config.mk b/board/v38b/config.mk
deleted file mode 100644
index 75577fcbec..0000000000
--- a/board/v38b/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MarelV38B board
-#
-
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
-
-TEXT_BASE = 0xFF000000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
deleted file mode 100644
index 4e2494eee5..0000000000
--- a/board/v38b/ethaddr.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-/* For the V38B board the pin is GPIO_PSC_6 */
-#define GPIO_PIN	GPIO_PSC6_0
-
-#define NO_ERROR	0
-#define ERR_NO_NUMBER	1
-#define ERR_BAD_NUMBER	2
-
-static int is_high(void);
-static int check_device(void);
-static void io_out(int value);
-static void io_input(void);
-static void io_output(void);
-static void init_gpio(void);
-static void read_byte(unsigned char *data);
-static void write_byte(unsigned char command);
-
-void read_2501_memory(unsigned char *psernum, unsigned char *perr);
-void board_get_enetaddr(uchar *enetaddr);
-
-
-static int is_high()
-{
-	return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
-}
-
-static void io_out(int value)
-{
-	if (value)
-		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
-	else
-		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
-}
-
-static void io_input()
-{
-	*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
-	udelay(3);	/* allow input to settle */
-}
-
-static void io_output()
-{
-	*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
-}
-
-static void init_gpio()
-{
-	*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
-}
-
-void read_2501_memory(unsigned char *psernum, unsigned char *perr)
-{
-#define NBYTES 28
-	unsigned char crcval, i;
-	unsigned char buf[NBYTES];
-
-	*perr = 0;
-	crcval = 0;
-
-	for (i = 0; i < NBYTES; i++)
-		buf[i] = 0;
-
-	if (!check_device())
-		*perr = ERR_NO_NUMBER;
-	else {
-		*perr = NO_ERROR;
-		write_byte(0xCC);		/* skip ROM (0xCC) */
-		write_byte(0xF0);		/* Read memory command 0xF0 */
-		write_byte(0x00);		/* Address TA1=0, TA2=0 */
-		write_byte(0x00);
-		read_byte(&crcval);		/* Read CRC of address and command */
-
-		for (i = 0; i < NBYTES; i++)
-			read_byte(&buf[i]);
-	}
-	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
-		*perr = ERR_BAD_NUMBER;
-		psernum[0] = 0x00;
-		psernum[1] = 0xE0;
-		psernum[2] = 0xEE;
-		psernum[3] = 0xFF;
-		psernum[4] = 0xFF;
-		psernum[5] = 0xFF;
-	} else {
-		psernum[0] = 0x00;
-		psernum[1] = 0xE0;
-		psernum[2] = 0xEE;
-		psernum[3] = buf[7];
-		psernum[4] = buf[6];
-		psernum[5] = buf[5];
-	}
-}
-
-static int check_device()
-{
-	int found;
-
-	io_output();
-	io_out(0);
-	udelay(500);  /* must be at least 480 us low pulse */
-
-	io_input();
-	udelay(60);
-
-	found = (is_high() == 0) ? 1 : 0;
-	udelay(500);  /* must be at least 480 us low pulse */
-
-	return found;
-}
-
-static void write_byte(unsigned char command)
-{
-	char i;
-
-	for (i = 0; i < 8; i++) {
-		/* 1 us to 15 us low pulse starts bit slot */
-		/* Start with high pulse for 3 us */
-		io_input();
-		udelay(3);
-
-		io_out(0);
-		io_output();
-		udelay(3);
-
-		if (command & 0x01) {
-			/* 60 us high for 1-bit */
-			io_input();
-			udelay(60);
-		} else
-			/* 60 us low for 0-bit */
-			udelay(60);
-		/*  Leave pin as input */
-		io_input();
-
-		command = command >> 1;
-	}
-}
-
-static void read_byte(unsigned char *data)
-{
-	unsigned char i, rdat = 0;
-
-	for (i = 0; i < 8; i++) {
-		/* read one bit from one-wire device */
-
-		/* 1 - 15 us low starts bit slot */
-		io_out(0);
-		io_output();
-		udelay(0);
-
-		/* allow line to be pulled high */
-		io_input();
-
-		/* delay 10 us */
-		udelay(10);
-
-		/* now sample input status */
-		if (is_high())
-			rdat = (rdat >> 1) | 0x80;
-		else
-			rdat = rdat >> 1;
-
-		udelay(60);	/* at least 60 us */
-	}
-	/* copy the return value */
-	*data = rdat;
-}
-
-void board_get_enetaddr(uchar *enetaddr)
-{
-	unsigned char sn[6], err = NO_ERROR;
-
-	init_gpio();
-
-	read_2501_memory(sn, &err);
-
-	if (err == NO_ERROR) {
-		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
-				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
-		printf("MAC address: %s\n", enetaddr);
-		setenv("ethaddr", (char *)enetaddr);
-	} else {
-		sprintf((char *)enetaddr, "00:01:02:03:04:05");
-		printf("Error reading MAC address.\n");
-		printf("Setting default to %s\n", enetaddr);
-		setenv("ethaddr", (char *)enetaddr);
-	}
-}
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
deleted file mode 100644
index 4fdea6b783..0000000000
--- a/board/v38b/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc5xxx/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
deleted file mode 100644
index ace4aa2cae..0000000000
--- a/board/v38b/v38b.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/processor.h>
-
-
-#ifndef CFG_RAMBOOT
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif /* SDRAM_DDR */
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif /* !CFG_RAMBOOT */
-
-
-long int initdram(int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-	uint svr, pvr;
-
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif /* SDRAM_DDR */
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else
-		dramsize = test2;
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20))
-		dramsize = 0;
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0)
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	else
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else
-		dramsize2 = test2;
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20))
-		dramsize2 = 0;
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0)
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	else
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-
-#else /* CFG_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13)
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	else
-		dramsize = 0;
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13)
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	else
-		dramsize2 = 0;
-
-#endif /* CFG_RAMBOOT */
-
-	/*
-	 * On MPC5200B we need to set the special configuration delay in the
-	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-	 *
-	 * "The SDelay should be written to a value of 0x00000004. It is
-	 * required to account for changes caused by normal wafer processing
-	 * parameters."
-	 */
-	svr = get_svr();
-	pvr = get_pvr();
-	if ((SVR_MJREV(svr) >= 2) &&
-		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
-		*(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
-		__asm__ volatile ("sync");
-	}
-
-	return dramsize + dramsize2;
-}
-
-
-int checkboard (void)
-{
-	puts("Board: MarelV38B\n");
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-#ifdef CONFIG_HW_WATCHDOG
-	/*
-	 * Enable and configure the direction (output) of PSC3_9 - watchdog
-	 * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
-	 * Manual.
-	 */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
-#endif /* CONFIG_HW_WATCHDOG */
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write access for the
-	 * detection process.  Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-
-	/*
-	 * Enable GPIO_WKUP_7 to "read the status of the actual power
-	 * situation". Default direction is input, so no need to set it
-	 * explicitly.
-	 */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
-	return 0;
-}
-
-
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-void init_ide_reset(void)
-{
-	debug("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
-	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
-}
-
-
-void ide_set_reset(int idereset)
-{
-	debug("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-		/* Make a delay. MPC5200 spec says 25 usec min */
-		udelay(500000);
-	} else
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
-}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
-
-
-#ifdef CONFIG_HW_WATCHDOG
-void hw_watchdog_reset(void)
-{
-	/*
-	 * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
-	 * we need a positive or negative transition on WDI i.e., our PSC3_9.
-	 */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
-}
-#endif /* CONFIG_HW_WATCHDOG */
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
deleted file mode 100644
index 5f340b47f0..0000000000
--- a/board/voiceblue/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= voiceblue.o
-SOBJS	:= setup.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c eeprom_start.S
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
-
-LOAD_ADDR = 0x10400000
-LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
-lnk = $(if $(obj),$(obj),.)
-
-all:	$(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-$(obj)eeprom.srec:	$(obj)eeprom.o $(obj)eeprom_start.o
-	cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
-		-o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \
-		-L$(obj)../../examples -lstubs \
-		-L$(obj)../../lib_generic -lgeneric \
-		-L$(gcclibdir) -lgcc
-	$(OBJCOPY) -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin:	$(obj)eeprom.srec
-	$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
-
-clean:
-	rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
-		$(obj)eeprom.srec $(obj)eeprom.bin \
-		$(obj)eeprom.o $(obj)eeprom_start.o
-
-
-distclean:	clean
-	rm -f $(LIB) core config.tmp *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
deleted file mode 100644
index d55daa41d9..0000000000
--- a/board/voiceblue/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifeq ($(VOICEBLUE_SMALL_FLASH),y)
-# We load ourself to internal SRAM at 2001'2000
-# Check map file when changing TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-TEXT_BASE = 0x20012000
-else
-# Running in SDRAM...
-TEXT_BASE = 0x13FD0000
-endif
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
deleted file mode 100644
index 0ad1b666b9..0000000000
--- a/board/voiceblue/eeprom.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#define DEBUG
-
-#include <common.h>
-#include <exports.h>
-#include "../drivers/smc91111.h"
-
-#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
-
-static u16 read_eeprom_reg(u16 reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK(2);
-	SMC_outw(reg, PTR_REG);
-
-	SMC_SELECT_BANK(1);
-	SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD,
-		 CTL_REG);
-	timeout = 100;
-	while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout)
-		udelay(100);
-	if (timeout == 0) {
-		printf("Timeout Reading EEPROM register %02x\n", reg);
-		return 0;
-	}
-
-	return SMC_inw (GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK(2);
-	SMC_outw(reg, PTR_REG);
-
-	SMC_SELECT_BANK(1);
-	SMC_outw(value, GP_REG);
-	SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG);
-	timeout = 100;
-	while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout)
-		udelay (100);
-	if (timeout == 0) {
-		printf("Timeout Writing EEPROM register %02x\n", reg);
-		return 0;
-	}
-
-	return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
-	u16 reg = 0x23;
-
-	while (len--)
-		write_eeprom_reg(*buf++, reg++);
-
-	return 0;
-}
-
-static int verify_macaddr(char *s)
-{
-	u16 reg;
-	int i, err = 0;
-
-	printf("MAC Address: ");
-	err = i = 0;
-	for (i = 0; i < 3; i++) {
-		reg = read_eeprom_reg(0x20 + i);
-		printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
-		if (s)
-			err |= reg != ((u16 *)s)[i];
-	}
-
-	return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
-	int i;
-	char *e, eaddr[6];
-
-	/* turn string into mac value */
-	for (i = 0; i < 6; i++) {
-		eaddr[i] = simple_strtoul(s, &e, 16);
-		s = (*e) ? e+1 : e;
-	}
-
-	for (i = 0; i < 3; i++)
-		write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
-	return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
-	int cnt;
-	char *p, num[3];
-	unsigned char id;
-
-	id = simple_strtoul(s, &p, 16);
-	if (*p++ != ':')
-		return -1;
-	cnt = 2;
-	num[2] = 0;
-	for (; *p; p += 2) {
-		if (p[1] == 0)
-			return -2;
-		if (cnt + 3 > len)
-			return -3;
-		num[0] = p[0];
-		num[1] = p[1];
-		buf[cnt++] = simple_strtoul(num, NULL, 16);
-	}
-	buf[0] = id;
-	buf[1] = cnt - 2;
-
-	return cnt;
-}
-
-int eeprom(int argc, char *argv[])
-{
-	int i, len, ret;
-	unsigned char buf[58], *p;
-
-	app_startup(argv);
-	if (get_version() != XF_VERSION) {
-		printf("Wrong XF_VERSION.\n");
-		printf("Application expects ABI version %d\n", XF_VERSION);
-		printf("Actual U-Boot ABI version %d\n", (int)get_version());
-		return 1;
-	}
-
-	if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
-		printf("SMSC91111 not found.\n");
-		return 2;
-	}
-
-	/* Called without parameters - print MAC address */
-	if (argc < 2) {
-		verify_macaddr(NULL);
-		return 0;
-	}
-
-	/* Print help message */
-	if (argv[1][1] == 'h') {
-		printf("VoiceBlue EEPROM writer\n");
-		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
-		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
-		return 0;
-	}
-
-	/* Try to parse information elements */
-	len = sizeof(buf);
-	p = buf;
-	for (i = 2; i < argc; i++) {
-		ret = parse_element(argv[i], p, len);
-		switch (ret) {
-		case -1:
-			printf("Element %d: malformed\n", i - 1);
-			return 3;
-		case -2:
-			printf("Element %d: odd character count\n", i - 1);
-			return 3;
-		case -3:
-			printf("Out of EEPROM memory\n");
-			return 3;
-		default:
-			p += ret;
-			len -= ret;
-		}
-	}
-
-	/* First argument (MAC) is mandatory */
-	set_mac(argv[1]);
-	if (verify_macaddr(argv[1])) {
-		printf("*** MAC address does not match! ***\n");
-		return 4;
-	}
-
-	while (len--)
-		*p++ = 0;
-
-	write_data((u16 *)buf, sizeof(buf) >> 1);
-
-	return 0;
-}
diff --git a/board/voiceblue/eeprom.lds b/board/voiceblue/eeprom.lds
deleted file mode 100644
index 317550dbad..0000000000
--- a/board/voiceblue/eeprom.lds
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = ALIGN(4);
-	.text      :
-	{
-	  eeprom_start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/voiceblue/eeprom_start.S b/board/voiceblue/eeprom_start.S
deleted file mode 100644
index 8f88de5c3b..0000000000
--- a/board/voiceblue/eeprom_start.S
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (c) 2005  2N Telekomunikace
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-.globl	_start
-_start:	b	eeprom
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
deleted file mode 100644
index dcf37b5dce..0000000000
--- a/board/voiceblue/setup.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
-	.word	TEXT_BASE	/* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE:		.word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE:	.word 0xfffbc800
-OMAP5910_MPU_TC_BASE:		.word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE:		.word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE:	.word 0xfffe0800
-OMAP5910_DPLL1_BASE:		.word 0xfffecf00
-OMAP5910_GPIO_BASE:		.word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE:	.word 0xfffec800
-OMAP5910_MPUI_BASE:		.word 0xfffec900
-
-_OMAP5910_ARM_CKCTL:		.word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK:		.word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL:		.word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG:		.word 0x00009090
-VAL_EMIFS_CS1_CONFIG:		.word 0x00003031
-VAL_EMIFS_CS2_CONFIG:		.word 0x00003031
-VAL_EMIFS_CS3_CONFIG:		.word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT:		.word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
-				/*     SLRF       SD_RET     ARE        SDRAM_TYPE   ARCV           SDRAM_FREQUENCY PWD     CLK */
-VAL_EMIFF_SDRAM_CONFIG:		.word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2:	.word 0x00000003
-VAL_EMIFF_MRS:			.word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
-	.word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
-	.word 0x00000010
-
-MUX_CONFIG_BASE:
-	.word 0xfffe1000
-
-MUX_CONFIG_VALUES:
-	.align 4
-	.word 0x00000000	@ FUNC_MUX_CTRL_0
-	.word 0x00000000	@ FUNC_MUX_CTRL_1
-	.word 0x00000000	@ FUNC_MUX_CTRL_2
-	.word 0x00000000	@ FUNC_MUX_CTRL_3
-	.word 0x00000000	@ FUNC_MUX_CTRL_4
-	.word 0x12082480	@ FUNC_MUX_CTRL_5
-	.word 0x00000004	@ FUNC_MUX_CTRL_6
-	.word 0x00000003	@ FUNC_MUX_CTRL_7
-	.word 0x10001200	@ FUNC_MUX_CTRL_8
-	.word 0x01201012	@ FUNC_MUX_CTRL_9
-	.word 0x02081248	@ FUNC_MUX_CTRL_A
-	.word 0x00001248	@ FUNC_MUX_CTRL_B
-	.word 0x12240000	@ FUNC_MUX_CTRL_C
-	.word 0x00002000	@ FUNC_MUX_CTRL_D
-	.word 0x00000000	@ PULL_DWN_CTRL_0
-	.word 0x0000085f	@ PULL_DWN_CTRL_1
-	.word 0x01001000	@ PULL_DWN_CTRL_2
-	.word 0x00000000	@ PULL_DWN_CTRL_3
-	.word 0x00000000	@ GATE_INH_CTRL_0
-	.word 0x00000000	@ VOLTAGE_CTRL_0
-	.word 0x00000000	@ TEST_DBG_CTRL_0
-	.word 0x00000006	@ MOD_CONF_CTRL_0
-	.word 0x0000eaef	@ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
-	.align 1
-	.byte 0x00		@ FUNC_MUX_CTRL_0
-	.byte 0x04		@ FUNC_MUX_CTRL_1
-	.byte 0x08		@ FUNC_MUX_CTRL_2
-	.byte 0x10		@ FUNC_MUX_CTRL_3
-	.byte 0x14		@ FUNC_MUX_CTRL_4
-	.byte 0x18		@ FUNC_MUX_CTRL_5
-	.byte 0x1c		@ FUNC_MUX_CTRL_6
-	.byte 0x20		@ FUNC_MUX_CTRL_7
-	.byte 0x24		@ FUNC_MUX_CTRL_8
-	.byte 0x28		@ FUNC_MUX_CTRL_9
-	.byte 0x2c		@ FUNC_MUX_CTRL_A
-	.byte 0x30		@ FUNC_MUX_CTRL_B
-	.byte 0x34		@ FUNC_MUX_CTRL_C
-	.byte 0x38		@ FUNC_MUX_CTRL_D
-	.byte 0x40		@ PULL_DWN_CTRL_0
-	.byte 0x44		@ PULL_DWN_CTRL_1
-	.byte 0x48		@ PULL_DWN_CTRL_2
-	.byte 0x4c		@ PULL_DWN_CTRL_3
-	.byte 0x50		@ GATE_INH_CTRL_0
-	.byte 0x60		@ VOLTAGE_CTRL_0
-	.byte 0x70		@ TEST_DBG_CTRL_0
-	.byte 0x80		@ MOD_CONF_CTRL_0
-	.byte 0x0c		@ COMP_MODE_CTRL_0
-	.byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Improve performance a bit... */
-	mrc	p15, 0, r1, c0, c0, 0		@ read C15 ID register
-	mrc	p15, 0, r1, c0, c0, 1		@ read C15 Cache information register
-	mrc	p15, 0, r1, c1, c0, 0		@ read C15 Control register
-	orr	r1, r1, #0x1000			@ enable I-cache, map interrupt vector 0xffff0000
-	mcr	p15, 0, r1, c1, c0, 0		@ write C15 Control register
-	mov	r1, #0x00
-	mcr	p15, 0, r1, c7, c5, 0		@ Flush I-cache
-	nop
-	nop
-	nop
-	nop
-
-	/* Setup clocking mode */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ prepare base of CLOCK unit
-	ldrh	r1, [r0, #0x18]			@ get reset status
-	bic	r1, r1, #(7 << 11)		@ clear clock select
-	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
-	mov	r2, #0				@ set wait counter to 100 clock cycles
-
-icache_loop:
-	cmp	r2, #0x01
-	streqh	r1, [r0, #0x18]
-	add	r2, r2, #0x01
-	cmp	r2, #0x10
-	bne	icache_loop
-	nop
-
-	/* Setup clock divisors */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
-	ldr	r1, _OMAP5910_ARM_CKCTL
-	orr	r1, r1, #0x2000			@ enable DSP clock
-	strh	r1, [r0, #0x00]			@ setup clock divisors
-
-	/* Setup DPLL to generate requested freq */
-	ldr	r0, OMAP5910_DPLL1_BASE		@ base of DPLL1 register
-	mov	r1, #0x0010			@ set PLL_ENABLE
-	orr	r1, r1, #0x2000			@ set IOB to new locking
-	orr	r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
-	orr	r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
-	strh	r1, [r0]			@ write
-
-locking:
-	ldrh	r1, [r0]			@ get DPLL value
-	tst	r1, #0x01
-	beq	locking				@ while LOCK not set
-
-	/* Enable clock */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
-	mov	r1, #(1 << 10)			@ disable idle mode do not check
-						@ nWAKEUP pin, other remain active
-	strh	r1, [r0, #0x04]
-	ldr	r1, _OMAP5910_ARM_EN_CLK
-	strh	r1, [r0, #0x08]
-	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
-						@ max delayed ( 32 x CLKIN )
-	strh	r1, [r0, #0x0c]
-
-	/* Configure 5910 pins functions to match our board. */
-	ldr     r0, MUX_CONFIG_BASE
-	adr	r1, MUX_CONFIG_VALUES
-	adr	r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
-	ldrb	r3, [r2], #1
-	ldr	r4, [r1], #4
-	cmp	r3, #0xff
-	strne	r4, [r0, r3]
-	bne	next_mux_cfg
-
-	/* Configure GPIO pins (also enables onboard LED) */
-	ldr	r0, OMAP5910_GPIO_BASE
-	ldr	r1, GPIO_OUTPUT
-	strh    r1, [r0, #0x04]
-	ldr	r1, GPIO_DIRECTION
-	strh	r1, [r0, #0x08]
-
-	/* EnablePeripherals */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ CLOCK unit
-	mov	r1, #0x0001			@ Peripheral enable
-	strh	r1, [r0, #0x14]
-
-	/* Program LED Pulse Generator */
-	ldr	r0, OMAP5910_LPG1_BASE		@ 1st LED Pulse Generator
-	mov	r1, #0x7F			@ Set obscure frequency in
-	strb	r1, [r0, #0x00]			@ LCR
-	mov	r1, #0x01			@ Enable clock (CLK_EN) in
-	strb    r1, [r0, #0x04]			@ PMR
-
-	/* TIPB Lock UART1 */
-	ldr	r0, OMAP5910_TIPB_SWITCHES_BASE	@ prepare base of TIPB switches
-	mov	r1, #1				@ ARM allocated
-	strh	r1, [r0,#0x04]			@ clear IRQ line and status bits
-	strh	r1, [r0,#0x00]
-	ldrh	r1, [r0,#0x04]
-
-	/* Disable watchdog */
-	ldr	r0, OMAP5910_MPU_WD_TIMER_BASE
-	mov	r1, #0xf5
-	strh	r1, [r0, #0x8]
-	mov	r1, #0xa0
-	strh	r1, [r0, #0x8]
-
-	/* Enable MCLK */
-	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE
-	mov	r1, #0x6
-	strh	r1, [r0, #0x34]
-	strh	r1, [r0, #0x34]
-
-	/* Setup clock divisors */
-	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE	@ base of ULDPL DPLL1 register
-
-	mov	r1, #0x0010			@ set PLL_ENABLE
-	orr	r1, r1, #0x2000			@ set IOB to new locking
-	strh	r1, [r0]			@ write
-
-ulocking:
-	ldrh	r1, [r0]			@ get DPLL value
-	tst	r1, #1
-	beq	ulocking			@ while LOCK not set
-
-	/* EMIF init */
-	ldr	r0, OMAP5910_MPU_TC_BASE
-	ldrh	r1, [r0, #0x0c]			@ EMIFS_CONFIG_REG
-	bic	r1, r1, #0x0c			@ pwr down disabled, flash WP
-	orr	r1, r1, #0x01
-	str	r1, [r0, #0x0c]
-
-	ldr	r1, VAL_EMIFS_CS0_CONFIG
-	str	r1, [r0, #0x10]			@ EMIFS_CS0_CONFIG
-	ldr	r1, VAL_EMIFS_CS1_CONFIG
-	str	r1, [r0, #0x14]			@ EMIFS_CS1_CONFIG
-	ldr	r1, VAL_EMIFS_CS2_CONFIG
-	str	r1, [r0, #0x18]			@ EMIFS_CS2_CONFIG
-	ldr	r1, VAL_EMIFS_CS3_CONFIG
-	str	r1, [r0, #0x1c]			@ EMIFS_CS3_CONFIG
-	ldr	r1, VAL_EMIFS_DYN_WAIT
-	str	r1, [r0, #0x40]			@ EMIFS_CFG_DYN_WAIT
-
-	/* Setup SDRAM */
-	ldr	r1, VAL_EMIFF_SDRAM_CONFIG
-	str	r1, [r0, #0x20]			@ EMIFF_SDRAM_CONFIG
-	ldr	r1, VAL_EMIFF_SDRAM_CONFIG2
-	str	r1, [r0, #0x3c]			@ EMIFF_SDRAM_CONFIG2
-	ldr	r1, VAL_EMIFF_MRS
-	str	r1, [r0, #0x24]			@ EMIFF_MRS
-	/* SDRAM needs 100us to stabilize */
-	mov	r0, #0x4000
-sdelay:
-	subs	r0, r0, #0x1
-	bne 	sdelay
-
-	/* back to arch calling code */
-	mov	pc, lr
-.end
diff --git a/board/voiceblue/u-boot.lds b/board/voiceblue/u-boot.lds
deleted file mode 100644
index f35a3ab024..0000000000
--- a/board/voiceblue/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm925t/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
deleted file mode 100644
index c8dde3651e..0000000000
--- a/board/voiceblue/voiceblue.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	*((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
-	/* arch number of VoiceBlue board */
-	gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	*((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
-	/* Take the Ethernet controller out of reset and wait
-	 * for the EEPROM load to complete. */
-	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
-	udelay(10);	/* doesn't work before interrupt_init call */
-	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
-	udelay(500);
-
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	*((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	*((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
-	return 0;
-}
diff --git a/board/xilinx/common/xbasic_types.c b/board/xilinx/common/xbasic_types.c
deleted file mode 100644
index c3a171a356..0000000000
--- a/board/xilinx/common/xbasic_types.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-     *
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.c
-*
-* This file contains basic functions for Xilinx software IP.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who    Date   Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/**
- * This variable allows testing to be done easier with asserts. An assert
- * sets this variable such that a driver can evaluate this variable
- * to determine if an assert occurred.
- */
-unsigned int XAssertStatus;
-
-/**
- * This variable allows the assert functionality to be changed for testing
- * such that it does not wait infinitely. Use the debugger to disable the
- * waiting during testing of asserts.
- */
-u32 XWaitInAssert = TRUE;
-
-/* The callback function to be invoked when an assert is taken */
-static XAssertCallback XAssertCallbackRoutine = (XAssertCallback) NULL;
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Implements assert. Currently, it calls a user-defined callback function
-* if one has been set.  Then, it potentially enters an infinite loop depending
-* on the value of the XWaitInAssert variable.
-*
-* @param    File is the name of the filename of the source
-* @param    Line is the linenumber within File
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XAssert(char *File, int Line)
-{
-	/* if the callback has been set then invoke it */
-	if (XAssertCallbackRoutine != NULL) {
-		(*XAssertCallbackRoutine) (File, Line);
-	}
-
-	/* if specified, wait indefinitely such that the assert will show up
-	 * in testing
-	 */
-	while (XWaitInAssert) {
-	}
-}
-
-/*****************************************************************************/
-/**
-*
-* Sets up a callback function to be invoked when an assert occurs. If there
-* was already a callback installed, then it is replaced.
-*
-* @param    Routine is the callback to be invoked when an assert is taken
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* This function has no effect if NDEBUG is set
-*
-******************************************************************************/
-void
-XAssertSetCallback(XAssertCallback Routine)
-{
-	XAssertCallbackRoutine = Routine;
-}
-
-/*****************************************************************************/
-/**
-*
-* Null handler function. This follows the XInterruptHandler signature for
-* interrupt handlers. It can be used to assign a null handler (a stub) to an
-* interrupt controller vector table.
-*
-* @param    NullParameter is an arbitrary void pointer and not used.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XNullHandler(void *NullParameter)
-{
-}
diff --git a/board/xilinx/common/xbasic_types.h b/board/xilinx/common/xbasic_types.h
deleted file mode 100644
index ef0b7c255f..0000000000
--- a/board/xilinx/common/xbasic_types.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.h
-*
-* This file contains basic types for Xilinx software IP.  These types do not
-* follow the standard naming convention with respect to using the component
-* name in front of each name because they are considered to be primitives.
-*
-* @note
-*
-* This file contains items which are architecture dependent.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who    Date   Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rmm  12/14/01 First release
-*	rmm  05/09/03 Added "xassert always" macros to rid ourselves of diab
-*		      compiler warnings
-* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XBASIC_TYPES_H		/* prevent circular inclusions */
-#define XBASIC_TYPES_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-/************************** Constant Definitions *****************************/
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-/** Null */
-
-#define XCOMPONENT_IS_READY	0x11111111	/* component has been initialized */
-#define XCOMPONENT_IS_STARTED	0x22222222	/* component has been started */
-
-/* the following constants and declarations are for unit test purposes and are
- * designed to be used in test applications.
- */
-#define XTEST_PASSED	0
-#define XTEST_FAILED	1
-
-#define XASSERT_NONE	 0
-#define XASSERT_OCCURRED 1
-
-extern unsigned int XAssertStatus;
-extern void XAssert(char *, int);
-
-/**************************** Type Definitions *******************************/
-
-/** @name Primitive types
- * These primitive types are created for transportability.
- * They are dependent upon the target architecture.
- * @{
- */
-#include <linux/types.h>
-
-typedef struct {
-	u32 Upper;
-	u32 Lower;
-} Xuint64;
-
-/*@}*/
-
-/**
- * This data type defines an interrupt handler for a device.
- * The argument points to the instance of the component
- */
-typedef void (*XInterruptHandler) (void *InstancePtr);
-
-/**
- * This data type defines a callback to be invoked when an
- * assert occurs. The callback is invoked only when asserts are enabled
- */
-typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-* Return the most significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The upper 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_MSW(x) ((x).Upper)
-
-/*****************************************************************************/
-/**
-* Return the least significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The lower 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_LSW(x) ((x).Lower)
-
-#ifndef NDEBUG
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do not return anything
-* (void). This in conjunction with the XWaitInAssert boolean can be used to
-* accomodate tests so that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID(expression)			\
-{							\
-	if (expression) {				\
-		XAssertStatus = XASSERT_NONE;		\
-	} else {					\
-		XAssert(__FILE__, __LINE__);		\
-		XAssertStatus = XASSERT_OCCURRED;	\
-		return;					\
-	}						\
-}
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do return a value. This in
-* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
-* that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns 0 unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID(expression)		   \
-{						   \
-	if (expression) {			   \
-		XAssertStatus = XASSERT_NONE;	   \
-	} else {				   \
-		XAssert(__FILE__, __LINE__);	   \
-		XAssertStatus = XASSERT_OCCURRED;  \
-		return 0;			   \
-	}					   \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do not
-* return anything (void). Use for instances where an assert should always
-* occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID_ALWAYS()			   \
-{						   \
-	XAssert(__FILE__, __LINE__);		   \
-	XAssertStatus = XASSERT_OCCURRED;	   \
-	return;					   \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do return
-* a value. Use for instances where an assert should always occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID_ALWAYS()		   \
-{						   \
-	XAssert(__FILE__, __LINE__);		   \
-	XAssertStatus = XASSERT_OCCURRED;	   \
-	return 0;				   \
-}
-
-#else
-
-#define XASSERT_VOID(expression)
-#define XASSERT_VOID_ALWAYS()
-#define XASSERT_NONVOID(expression)
-#define XASSERT_NONVOID_ALWAYS()
-#endif
-
-/************************** Function Prototypes ******************************/
-
-void XAssertSetCallback(XAssertCallback Routine);
-void XNullHandler(void *NullParameter);
-
-#endif	/* end of protection macro */
diff --git a/board/xilinx/common/xbuf_descriptor.h b/board/xilinx/common/xbuf_descriptor.h
deleted file mode 100644
index fdd51d58d4..0000000000
--- a/board/xilinx/common/xbuf_descriptor.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xbuf_descriptor.h
-*
-* DESCRIPTION:
-*
-* This file contains the interface for the XBufDescriptor component.
-* The XBufDescriptor component is a passive component that only maps over
-* a buffer descriptor data structure shared by the scatter gather DMA hardware
-* and software. The component's primary purpose is to provide encapsulation of
-* the buffer descriptor processing.  See the source file xbuf_descriptor.c for
-* details.
-*
-* NOTES:
-*
-* Most of the functions of this component are implemented as macros in order
-* to optimize the processing.  The names are not all uppercase such that they
-* can be switched between macros and functions easily.
-*
-******************************************************************************/
-
-#ifndef XBUF_DESCRIPTOR_H	/* prevent circular inclusions */
-#define XBUF_DESCRIPTOR_H	/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xdma_channel_i.h"
-
-/************************** Constant Definitions *****************************/
-
-/* The following constants allow access to all fields of a buffer descriptor
- * and are necessary at this level of visibility to allow macros to access
- * and modify the fields of a buffer descriptor.  It is not expected that the
- * user of a buffer descriptor would need to use these constants.
- */
-
-#define XBD_DEVICE_STATUS_OFFSET    0
-#define XBD_CONTROL_OFFSET	    1
-#define XBD_SOURCE_OFFSET	    2
-#define XBD_DESTINATION_OFFSET	    3
-#define XBD_LENGTH_OFFSET	    4
-#define XBD_STATUS_OFFSET	    5
-#define XBD_NEXT_PTR_OFFSET	    6
-#define XBD_ID_OFFSET		    7
-#define XBD_FLAGS_OFFSET	    8
-#define XBD_RQSTED_LENGTH_OFFSET    9
-
-#define XBD_SIZE_IN_WORDS	    10
-
-/*
- * The following constants define the bits of the flags field of a buffer
- * descriptor
- */
-
-#define XBD_FLAGS_LOCKED_MASK	    1UL
-
-/**************************** Type Definitions *******************************/
-
-typedef u32 XBufDescriptor[XBD_SIZE_IN_WORDS];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* each of the following macros are named the same as functions rather than all
- * upper case in order to allow either the macros or the functions to be
- * used, see the source file xbuf_descriptor.c for documentation
- */
-
-#define XBufDescriptor_Initialize(InstancePtr)			\
-{								\
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = 0);   \
-    (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = 0); \
-    (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_ID_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = 0); \
-}
-
-#define XBufDescriptor_GetControl(InstancePtr)	 \
-    (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET))
-
-#define XBufDescriptor_SetControl(InstancePtr, Control)	 \
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = (u32)Control)
-
-#define XBufDescriptor_IsLastControl(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) & \
-	       XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_SetLast(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) |= XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_GetSrcAddress(InstancePtr) \
-    ((u32 *)(*((u32 *)InstancePtr + XBD_SOURCE_OFFSET)))
-
-#define XBufDescriptor_SetSrcAddress(InstancePtr, Source) \
-    (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = (u32)Source)
-
-#define XBufDescriptor_GetDestAddress(InstancePtr) \
-    ((u32 *)(*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET)))
-
-#define XBufDescriptor_SetDestAddress(InstancePtr, Destination) \
-    (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = (u32)Destination)
-
-#define XBufDescriptor_GetLength(InstancePtr)				\
-    (u32)(*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) -	\
-	      *((u32 *)InstancePtr + XBD_LENGTH_OFFSET))
-
-#define XBufDescriptor_SetLength(InstancePtr, Length)			    \
-{									    \
-    (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = (u32)(Length));    \
-    (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = (u32)(Length));\
-}
-
-#define XBufDescriptor_GetStatus(InstancePtr)	 \
-    (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET))
-
-#define XBufDescriptor_SetStatus(InstancePtr, Status)	 \
-    (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_IsLastStatus(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET) & \
-	       XDC_STATUS_LAST_BD_MASK)
-
-#define XBufDescriptor_GetDeviceStatus(InstancePtr) \
-    ((u32)(*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET)))
-
-#define XBufDescriptor_SetDeviceStatus(InstancePtr, Status) \
-    (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_GetNextPtr(InstancePtr) \
-    (XBufDescriptor *)(*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET))
-
-#define XBufDescriptor_SetNextPtr(InstancePtr, NextPtr) \
-    (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = (u32)NextPtr)
-
-#define XBufDescriptor_GetId(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_ID_OFFSET))
-
-#define XBufDescriptor_SetId(InstancePtr, Id) \
-    (*((u32 *)InstancePtr + XBD_ID_OFFSET) = (u32)Id)
-
-#define XBufDescriptor_GetFlags(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_FLAGS_OFFSET))
-
-#define XBufDescriptor_SetFlags(InstancePtr, Flags) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = (u32)Flags)
-
-#define XBufDescriptor_Lock(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) |= XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_Unlock(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) &= ~XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_IsLocked(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) & XBD_FLAGS_LOCKED_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* The following prototypes are provided to allow each of the functions to
- * be implemented as a function rather than a macro, and to provide the
- * syntax to allow users to understand how to call the macros, they are
- * commented out to prevent linker errors
- *
-
-u32 XBufDescriptor_Initialize(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetControl(XBufDescriptor* InstancePtr, u32 Control);
-
-u32 XBufDescriptor_IsLastControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLast(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetLength(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLength(XBufDescriptor* InstancePtr, u32 Length);
-
-u32 XBufDescriptor_GetStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetStatus(XBufDescriptor* InstancePtr, u32 Status);
-u32 XBufDescriptor_IsLastStatus(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetDeviceStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDeviceStatus(XBufDescriptor* InstancePtr,
-				    u32 Status);
-
-u32 XBufDescriptor_GetSrcAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetSrcAddress(XBufDescriptor* InstancePtr,
-				  u32 SourceAddress);
-
-u32 XBufDescriptor_GetDestAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDestAddress(XBufDescriptor* InstancePtr,
-				   u32 DestinationAddress);
-
-XBufDescriptor* XBufDescriptor_GetNextPtr(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetNextPtr(XBufDescriptor* InstancePtr,
-			       XBufDescriptor* NextPtr);
-
-u32 XBufDescriptor_GetId(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetId(XBufDescriptor* InstancePtr, u32 Id);
-
-u32 XBufDescriptor_GetFlags(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetFlags(XBufDescriptor* InstancePtr, u32 Flags);
-
-void XBufDescriptor_Lock(XBufDescriptor* InstancePtr);
-void XBufDescriptor_Unlock(XBufDescriptor* InstancePtr);
-u32 XBufDescriptor_IsLocked(XBufDescriptor* InstancePtr);
-
-void XBufDescriptor_Copy(XBufDescriptor* InstancePtr,
-			 XBufDescriptor* DestinationPtr);
-
-*/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c
deleted file mode 100644
index 3d5fc75e36..0000000000
--- a/board/xilinx/common/xdma_channel.c
+++ /dev/null
@@ -1,738 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.c
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component. This component supports
-* a distributed DMA design in which each device can have it's own dedicated
-* DMA channel, as opposed to a centralized DMA design. This component
-* performs processing for DMA on all devices.
-*
-* See xdma_channel.h for more information about this component.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Initialize
-*
-* DESCRIPTION:
-*
-* This function initializes a DMA channel.  This function must be called
-* prior to using a DMA channel.  Initialization of a channel includes setting
-* up the registers base address, and resetting the channel such that it's in a
-* known state.  Interrupts for the channel are disabled when the channel is
-* reset.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* BaseAddress contains the base address of the registers for the DMA channel.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS indicating initialization was successful.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress)
-{
-	/* assert to verify input arguments, don't assert base address */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	/* setup the base address of the registers for the DMA channel such
-	 * that register accesses can be done
-	 */
-	InstancePtr->RegBaseAddress = BaseAddress;
-
-	/* initialize the scatter gather list such that it indicates it has not
-	 * been created yet and the DMA channel is ready to use (initialized)
-	 */
-	InstancePtr->GetPtr = NULL;
-	InstancePtr->PutPtr = NULL;
-	InstancePtr->CommitPtr = NULL;
-	InstancePtr->LastPtr = NULL;
-
-	InstancePtr->TotalDescriptorCount = 0;
-	InstancePtr->ActiveDescriptorCount = 0;
-	InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
-	/* initialize the version of the component
-	 */
-	XVersion_FromString(&InstancePtr->Version, (s8 *)"1.00a");
-
-	/* reset the DMA channel such that it's in a known state and ready
-	 * and indicate the initialization occured with no errors, note that
-	 * the is ready variable must be set before this call or reset will assert
-	 */
-	XDmaChannel_Reset(InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsReady
-*
-* DESCRIPTION:
-*
-* This function determines if a DMA channel component has been successfully
-* initialized such that it's ready to use.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* TRUE if the DMA channel component is ready, FALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsReady(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments used by the base component */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	return InstancePtr->IsReady == XCOMPONENT_IS_READY;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetVersion
-*
-* DESCRIPTION:
-*
-* This function gets the software version for the specified DMA channel
-* component.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* A pointer to the software version of the specified DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XVersion *
-XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return a pointer to the version of the DMA channel */
-
-	return &InstancePtr->Version;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified DMA channel.  This self
-* test is destructive as the DMA channel is reset and a register default is
-* verified.
-*
-* ARGUMENTS:
-*
-* InstancePtr is a pointer to the DMA channel to be operated on.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS is returned if the self test is successful, or one of the
-* following errors.
-*
-*	XST_DMA_RESET_REGISTER_ERROR 		Indicates the control register value
-*										after a reset was not correct
-*
-* NOTES:
-*
-* This test does not performs a DMA transfer to test the channel because the
-* DMA hardware will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-******************************************************************************/
-
-#define XDC_CONTROL_REG_RESET_MASK  0x98000000UL	/* control reg reset value */
-
-XStatus
-XDmaChannel_SelfTest(XDmaChannel * InstancePtr)
-{
-	u32 ControlReg;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the DMA channel such that it's in a known state before the test
-	 * it resets to no interrupts enabled, the desired state for the test
-	 */
-	XDmaChannel_Reset(InstancePtr);
-
-	/* this should be the first test to help prevent a lock up with the polling
-	 * loop that occurs later in the test, check the reset value of the DMA
-	 * control register to make sure it's correct, return with an error if not
-	 */
-	ControlReg = XDmaChannel_GetControl(InstancePtr);
-	if (ControlReg != XDC_CONTROL_REG_RESET_MASK) {
-		return XST_DMA_RESET_REGISTER_ERROR;
-	}
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Reset
-*
-* DESCRIPTION:
-*
-* This function resets the DMA channel. This is a destructive operation such
-* that it should not be done while a channel is being used.  If the DMA channel
-* is transferring data into other blocks, such as a FIFO, it may be necessary
-* to reset other blocks.  This function does not modify the contents of a
-* scatter gather list for a DMA channel such that the user is responsible for
-* getting buffer descriptors from the list if necessary.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_Reset(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the DMA channel such that it's in a known state, the reset
-	 * register is self clearing such that it only has to be set
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET,
-		  XDC_RESET_MASK);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetControl
-*
-* DESCRIPTION:
-*
-* This function gets the control register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The control register contents of the DMA channel. One or more of the
-* following values may be contained the register.  Each of the values are
-* unique bit masks.
-*
-*	XDC_DMACR_SOURCE_INCR_MASK	Increment the source address
-*	XDC_DMACR_DEST_INCR_MASK	Increment the destination address
-*	XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-*	XDC_DMACR_DEST_LOCAL_MASK	Local destination address
-*	XDC_DMACR_SG_ENABLE_MASK	Scatter gather enable
-*	XDC_DMACR_GEN_BD_INTR_MASK	Individual buffer descriptor interrupt
-*	XDC_DMACR_LAST_BD_MASK		Last buffer descriptor in a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetControl(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the DMA control register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetControl
-*
-* DESCRIPTION:
-*
-* This function sets the control register of the specified DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Control contains the value to be written to the control register of the DMA
-* channel. One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-*	XDC_DMACR_SOURCE_INCR_MASK	Increment the source address
-*	XDC_DMACR_DEST_INCR_MASK	Increment the destination address
-*	XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-*	XDC_DMACR_DEST_LOCAL_MASK	Local destination address
-*	XDC_DMACR_SG_ENABLE_MASK	Scatter gather enable
-*	XDC_DMACR_GEN_BD_INTR_MASK	Individual buffer descriptor interrupt
-*	XDC_DMACR_LAST_BD_MASK		Last buffer descriptor in a packet
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
-{
-	/* assert to verify input arguments except the control which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the DMA control register to the specified value */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetStatus
-*
-* DESCRIPTION:
-*
-* This function gets the status register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The status register contents of the DMA channel. One or more of the
-* following values may be contained the register. Each of the values are
-* unique bit masks.
-*
-*	XDC_DMASR_BUSY_MASK			The DMA channel is busy
-*	XDC_DMASR_BUS_ERROR_MASK	A bus error occurred
-*	XDC_DMASR_BUS_TIMEOUT_MASK	A bus timeout occurred
-*	XDC_DMASR_LAST_BD_MASK		The last buffer descriptor of a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the DMA status register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt status register of the specified DMA channel.
-* Setting any bit of the interrupt status register will clear the bit to
-* indicate the interrupt processing has been completed. The definitions of each
-* bit in the register match the definition of the bits in the interrupt enable
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Status contains the value to be written to the status register of the DMA
-* channel.  One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
-{
-	/* assert to verify input arguments except the status which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the interrupt status register with the specified value such that
-	 * all bits which are set in the register are cleared effectively clearing
-	 * any active interrupts
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt status register of the specified DMA channel.
-* The interrupt status register indicates which interrupts are active
-* for the DMA channel.  If an interrupt is active, the status register must be
-* set (written) with the bit set for each interrupt which has been processed
-* in order to clear the interrupts.  The definitions of each bit in the register
-* match the definition of the bits in the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt status register contents of the specified DMA channel.
-* One or more of the following values may be contained the register.
-* Each of the values are unique bit masks.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the interrupt status register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt enable register of the specified DMA
-* channel.  The interrupt enable register contains bits which enable
-* individual interrupts for the DMA channel.  The definitions of each bit
-* in the register match the definition of the bits in the interrupt status
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Enable contains the interrupt enable register contents to be written
-* in the DMA channel. One or more of the following values may be contained
-* the register. Each of the values are unique bit masks such that they may be
-* ORed together to enable multiple bits or inverted and ANDed to disable
-* multiple bits.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
-{
-	/* assert to verify input arguments except the enable which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the interrupt enable register to the specified value */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt enable of the DMA channel.  The
-* interrupt enable contains flags which enable individual interrupts for the
-* DMA channel. The definitions of each bit in the register match the definition
-* of the bits in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt enable of the DMA channel.  One or more of the following values
-* may be contained the register. Each of the values are unique bit masks.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the interrupt enable register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Transfer
-*
-* DESCRIPTION:
-*
-* This function starts the DMA channel transferring data from a memory source
-* to a memory destination. This function only starts the operation and returns
-* before the operation may be complete.  If the interrupt is enabled, an
-* interrupt will be generated when the operation is complete, otherwise it is
-* necessary to poll the channel status to determine when it's complete.  It is
-* the responsibility of the caller to determine when the operation is complete
-* by handling the generated interrupt or polling the status.  It is also the
-* responsibility of the caller to ensure that the DMA channel is not busy with
-* another transfer before calling this function.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* SourcePtr contains a pointer to the source memory where the data is to
-* be tranferred from and must be 32 bit aligned.
-*
-* DestinationPtr contains a pointer to the destination memory where the data
-* is to be transferred and must be 32 bit aligned.
-*
-* ByteCount contains the number of bytes to transfer during the DMA operation.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* The DMA h/w will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-* It is the responsibility of the caller to ensure that the cache is
-* flushed and invalidated both before and after the DMA operation completes
-* if the memory pointed to is cached. The caller must also ensure that the
-* pointers contain a physical address rather than a virtual address
-* if address translation is being used.
-*
-******************************************************************************/
-void
-XDmaChannel_Transfer(XDmaChannel * InstancePtr,
-		     u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
-{
-	/* assert to verify input arguments and the alignment of any arguments
-	 * which have expected alignments
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(SourcePtr != NULL);
-	XASSERT_VOID(((u32) SourcePtr & 3) == 0);
-	XASSERT_VOID(DestinationPtr != NULL);
-	XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
-	XASSERT_VOID(ByteCount != 0);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* setup the source and destination address registers for the transfer */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
-		  (u32) SourcePtr);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
-		  (u32) DestinationPtr);
-
-	/* start the DMA transfer to copy from the source buffer to the
-	 * destination buffer by writing the length to the length register
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
-}
diff --git a/board/xilinx/common/xdma_channel.h b/board/xilinx/common/xdma_channel.h
deleted file mode 100644
index 06976c3e04..0000000000
--- a/board/xilinx/common/xdma_channel.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.h
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component implementation. This component
-* supports a distributed DMA design in which each device can have it's own
-* dedicated DMA channel, as opposed to a centralized DMA design.
-* A device which uses DMA typically contains two DMA channels, one for
-* sending data and the other for receiving data.
-*
-* This component is designed to be used as a basic building block for
-* designing a device driver. It provides registers accesses such that all
-* DMA processing can be maintained easier, but the device driver designer
-* must still understand all the details of the DMA channel.
-*
-* The DMA channel allows a CPU to minimize the CPU interaction required to move
-* data between a memory and a device.  The CPU requests the DMA channel to
-* perform a DMA operation and typically continues performing other processing
-* until the DMA operation completes.  DMA could be considered a primitive form
-* of multiprocessing such that caching and address translation can be an issue.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware.  Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel.  The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather.  The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations.  The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events.  The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list.  Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list.  Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation.  This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-*    descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-* 	 receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-*    gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-*    used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-*    operations or poll the DMA channel to determine the status.
-*
-* Interrupts
-*
-* Each DMA channel has the ability to generate an interrupt.  This component
-* does not perform processing for the interrupt as this processing is typically
-* tightly coupled with the device which is using the DMA channel.  It is the
-* responsibility of the caller of DMA functions to manage the interrupt
-* including connecting to the interrupt and enabling/disabling the interrupt.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the DMA channel.  This
-* component does not use critical sections and it does access registers using
-* read-modify-write operations.  Calls to DMA functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Address Translation
-*
-* All addresses of data structures which are passed to DMA functions must
-* be physical (real) addresses as opposed to logical (virtual) addresses.
-*
-* Caching
-*
-* The memory which is passed to the function which creates the scatter gather
-* list must not be cached such that buffer descriptors are non-cached.  This
-* is necessary because the buffer descriptors are kept in a ring buffer and
-* not directly accessible to the caller of DMA functions.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel are cache-line aligned if
-* necessary.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel have been flushed from the cache.
-*
-* The caller of DMA functions is responsible for ensuring that the cache is
-* invalidated prior to using any data buffers which are the result of a DMA
-* operation.
-*
-* Memory Alignment
-*
-* The addresses of data buffers which are passed to DMA functions must be
-* 32 bit word aligned since the DMA hardware performs 32 bit word transfers.
-*
-* Mutual Exclusion
-*
-* The functions of the DMA channel are not thread safe such that the caller
-* of all DMA functions is responsible for ensuring mutual exclusion for a
-* DMA channel.  Mutual exclusion across multiple DMA channels is not
-* necessary.
-*
-* NOTES:
-*
-* Many of the provided functions which are register accessors don't provide
-* a lot of error detection. The caller is expected to understand the impact
-* of a function call based upon the current state of the DMA channel.  This
-* is done to minimize the overhead in this component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_H		/* prevent circular inclusions */
-#define XDMA_CHANNEL_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel_i.h"	/* constants shared with buffer descriptor */
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-#include "xbuf_descriptor.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants provide access to the bit fields of the DMA control
- * register (DMACR)
- */
-#define XDC_DMACR_SOURCE_INCR_MASK	0x80000000UL	/* increment source address */
-#define XDC_DMACR_DEST_INCR_MASK	0x40000000UL	/* increment dest address */
-#define XDC_DMACR_SOURCE_LOCAL_MASK 0x20000000UL	/* local source address */
-#define XDC_DMACR_DEST_LOCAL_MASK	0x10000000UL	/* local dest address */
-#define XDC_DMACR_SG_DISABLE_MASK	0x08000000UL	/* scatter gather disable */
-#define XDC_DMACR_GEN_BD_INTR_MASK	0x04000000UL	/* descriptor interrupt */
-#define XDC_DMACR_LAST_BD_MASK		XDC_CONTROL_LAST_BD_MASK	/* last buffer */
-															 /*     descriptor  */
-
-/* the following constants provide access to the bit fields of the DMA status
- * register (DMASR)
- */
-#define XDC_DMASR_BUSY_MASK			0x80000000UL	/* channel is busy */
-#define XDC_DMASR_BUS_ERROR_MASK	0x40000000UL	/* bus error occurred */
-#define XDC_DMASR_BUS_TIMEOUT_MASK	0x20000000UL	/* bus timeout occurred */
-#define XDC_DMASR_LAST_BD_MASK		XDC_STATUS_LAST_BD_MASK	/* last buffer */
-														    /* descriptor  */
-#define XDC_DMASR_SG_BUSY_MASK		0x08000000UL	/* scatter gather is busy */
-
-/* the following constants provide access to the bit fields of the interrupt
- * status register (ISR) and the interrupt enable register (IER), bit masks
- * match for both registers such that they are named IXR
- */
-#define XDC_IXR_DMA_DONE_MASK		0x1UL	/* dma operation done */
-#define XDC_IXR_DMA_ERROR_MASK	    0x2UL	/* dma operation error */
-#define XDC_IXR_PKT_DONE_MASK	    0x4UL	/* packet done */
-#define XDC_IXR_PKT_THRESHOLD_MASK 	0x8UL	/* packet count threshold */
-#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL	/* packet wait bound reached */
-#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL	/* scatter gather disable
-						   acknowledge occurred */
-#define XDC_IXR_SG_END_MASK			0x40UL	/* last buffer descriptor
-							   disabled scatter gather */
-#define XDC_IXR_BD_MASK				0x80UL	/* buffer descriptor done */
-
-/**************************** Type Definitions *******************************/
-
-/*
- * the following structure contains data which is on a per instance basis
- * for the XDmaChannel component
- */
-typedef struct XDmaChannelTag {
-	XVersion Version;	/* version of the driver */
-	u32 RegBaseAddress;	/* base address of registers */
-	u32 IsReady;		/* device is initialized and ready */
-
-	XBufDescriptor *PutPtr;	/* keep track of where to put into list */
-	XBufDescriptor *GetPtr;	/* keep track of where to get from list */
-	XBufDescriptor *CommitPtr;	/* keep track of where to commit in list */
-	XBufDescriptor *LastPtr;	/* keep track of the last put in the list */
-	u32 TotalDescriptorCount;	/* total # of descriptors in the list */
-	u32 ActiveDescriptorCount;	/* # of descriptors pointing to buffers
-					   * in the buffer descriptor list */
-} XDmaChannel;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-XStatus XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress);
-u32 XDmaChannel_IsReady(XDmaChannel * InstancePtr);
-XVersion *XDmaChannel_GetVersion(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SelfTest(XDmaChannel * InstancePtr);
-void XDmaChannel_Reset(XDmaChannel * InstancePtr);
-
-/* Control functions */
-
-u32 XDmaChannel_GetControl(XDmaChannel * InstancePtr);
-void XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control);
-
-/* Status functions */
-
-u32 XDmaChannel_GetStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status);
-u32 XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable);
-u32 XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr);
-
-/* DMA without scatter gather functions */
-
-void XDmaChannel_Transfer(XDmaChannel * InstancePtr,
-			  u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount);
-
-/* Scatter gather functions */
-
-XStatus XDmaChannel_SgStart(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SgStop(XDmaChannel * InstancePtr,
-			   XBufDescriptor ** BufDescriptorPtr);
-XStatus XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
-				 u32 * MemoryPtr, u32 ByteCount);
-u32 XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr);
-
-XStatus XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
-				  XBufDescriptor * BufDescriptorPtr);
-XStatus XDmaChannel_CommitPuts(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
-				  XBufDescriptor ** BufDescriptorPtr);
-
-/* Packet functions for interrupt collescing */
-
-u32 XDmaChannel_GetPktCount(XDmaChannel * InstancePtr);
-void XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold);
-u8 XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr);
-void XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound);
-u32 XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_i.h b/board/xilinx/common/xdma_channel_i.h
deleted file mode 100644
index e9f343bbbe..0000000000
--- a/board/xilinx/common/xdma_channel_i.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_i.h
-*
-* DESCRIPTION:
-*
-* This file contains data which is shared internal data for the DMA channel
-* component. It is also shared with the buffer descriptor component which is
-* very tightly coupled with the DMA channel component.
-*
-* NOTES:
-*
-* The last buffer descriptor constants must be located here to prevent a
-* circular dependency between the DMA channel component and the buffer
-* descriptor component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_I_H	/* prevent circular inclusions */
-#define XDMA_CHANNEL_I_H	/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_DMA_CHANNEL_V1_00_A		"1.00a"
-
-/* the following constant provides access to the bit fields of the DMA control
- * register (DMACR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_CONTROL_LAST_BD_MASK	0x02000000UL	/* last buffer descriptor */
-
-/* the following constant provides access to the bit fields of the DMA status
- * register (DMASR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_STATUS_LAST_BD_MASK		0x10000000UL	/* last buffer descriptor */
-
-/* the following constants provide access to each of the registers of a DMA
- * channel
- */
-#define XDC_RST_REG_OFFSET	0	/* reset register */
-#define XDC_MI_REG_OFFSET	0	/* module information register */
-#define XDC_DMAC_REG_OFFSET	4	/* DMA control register */
-#define XDC_SA_REG_OFFSET	8	/* source address register */
-#define XDC_DA_REG_OFFSET	12	/* destination address register */
-#define XDC_LEN_REG_OFFSET	16	/* length register */
-#define XDC_DMAS_REG_OFFSET	20	/* DMA status register */
-#define XDC_BDA_REG_OFFSET	24	/* buffer descriptor address register */
-#define XDC_SWCR_REG_OFFSET 28	/* software control register */
-#define XDC_UPC_REG_OFFSET	32	/* unserviced packet count register */
-#define	XDC_PCT_REG_OFFSET	36	/* packet count threshold register */
-#define XDC_PWB_REG_OFFSET	40	/* packet wait bound register */
-#define XDC_IS_REG_OFFSET	44	/* interrupt status register */
-#define XDC_IE_REG_OFFSET	48	/* interrupt enable register */
-
-/* the following constant is written to the reset register to reset the
- * DMA channel
- */
-#define XDC_RESET_MASK				0x0000000AUL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_sg.c b/board/xilinx/common/xdma_channel_sg.c
deleted file mode 100644
index a8e94625bf..0000000000
--- a/board/xilinx/common/xdma_channel_sg.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-/* $Id: xdma_channel_sg.c,v 1.6 2003/02/03 19:50:33 moleres Exp $ */
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_sg.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XDmaChannel component which is
-* related to scatter gather operations.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware.	 Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel.  The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather.	 The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations.  The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events.  The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list.  Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list.  Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation.  This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* The get and put functions only operate on the list and are asynchronous from
-* the hardware which may be using the list of descriptors.  This is important
-* because there are no checks in the get and put functions to ensure that the
-* hardware has processed the descriptors.  This must be handled by the driver
-* using the DMA scatter gather channel through the use of the other functions.
-* When a scatter gather operation is started, the start function does ensure
-* that the descriptor to start has not already been processed by the hardware
-* and is not the first of a series of descriptors that have not been committed
-* yet.
-*
-* Descriptors are put into the list but not marked as ready to use by the
-* hardware until a commit operation is done.  This allows multiple descriptors
-* which may contain a single packet of information for a protocol to be
-* guaranteed not to cause any underflow conditions during transmission. The
-* hardware design only allows descriptors to cause it to stop after a descriptor
-* has been processed rather than before it is processed.  A series of
-* descriptors are put into the list followed by a commit operation, or each
-* descriptor may be commited.  A commit operation is performed by changing a
-* single descriptor, the first of the series of puts, to indicate that the
-* hardware may now use all descriptors after it.  The last descriptor in the
-* list is always set to cause the hardware to stop after it is processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-*    descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-*    receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-*    gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-*    used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-*    operations or poll the DMA channel to determine the status.  This may
-*    be accomplished by getting the packet count for the channel and then
-*    getting the appropriate number of descriptors from the list for that
-*    number of packets.
-*
-* Minimizing Interrupts
-*
-* The Scatter Gather operating mode is designed to reduce the amount of CPU
-* throughput necessary to manage the hardware for devices. A key to the CPU
-* throughput is the number and rate of interrupts that the CPU must service.
-* Devices with higher data rates can cause larger numbers of interrupts and
-* higher frequency interrupts. Ideally the number of interrupts can be reduced
-* by only generating an interrupt when a specific amount of data has been
-* received from the interface. This design suffers from a lack of interrupts
-* when the amount of data received is less than the specified amount of data
-* to generate an interrupt. In order to help minimize the number of interrupts
-* which the CPU must service, an algorithm referred to as "interrupt coalescing"
-* is utilized.
-*
-* Interrupt Coalescing
-*
-* The principle of interrupt coalescing is to wait before generating an
-* interrupt until a certain number of packets have been received or sent. An
-* interrupt is also generated if a smaller number of packets have been received
-* followed by a certain period of time with no packet reception. This is a
-* trade-off of latency for bandwidth and is accomplished using several
-* mechanisms of the hardware including a counter for packets received or
-* transmitted and a packet timer. These two hardware mechanisms work in
-* combination to allow a reduction in the number of interrupts processed by the
-* CPU for packet reception.
-*
-* Unserviced Packet Count
-*
-* The purpose of the packet counter is to count the number of packets received
-* or transmitted and provide an interrupt when a specific number of packets
-* have been processed by the hardware. An interrupt is generated whenever the
-* counter is greater than or equal to the Packet Count Threshold. This counter
-* contains an accurate count of the number of packets that the hardware has
-* processed, either received or transmitted, and the software has not serviced.
-*
-* The packet counter allows the number of interrupts to be reduced by waiting
-* to generate an interrupt until enough packets are received. For packet
-* reception, packet counts of less than the number to generate an interrupt
-* would not be serviced without the addition of a packet timer. This counter is
-* continuously updated by the hardware, not latched to the value at the time
-* the interrupt occurred.
-*
-* The packet counter can be used within the interrupt service routine for the
-* device to reduce the number of interrupts. The interrupt service routine
-* loops while performing processing for each packet which has been received or
-* transmitted and decrements the counter by a specified value. At the same time,
-* the hardware is possibly continuing to receive or transmit more packets such
-* that the software may choose, based upon the value in the packet counter, to
-* remain in the interrupt service routine rather than exiting and immediately
-* returning. This feature should be used with caution as reducing the number of
-* interrupts is beneficial, but unbounded interrupt processing is not desirable.
-*
-* Since the hardware may be incrementing the packet counter simultaneously
-* with the software decrementing the counter, there is a need for atomic
-* operations. The hardware ensures that the operation is atomic such that
-* simultaneous accesses are properly handled.
-*
-* Packet Wait Bound
-*
-* The purpose of the packet wait bound is to augment the unserviced packet
-* count. Whenever there is no pending interrupt for the channel and the
-* unserviced packet count is non-zero, a timer starts counting timeout at the
-* value contained the the packet wait bound register.  If the timeout is
-* reached, an interrupt is generated such that the software may service the
-* data which was buffered.
-*
-* NOTES:
-*
-* Special Test Conditions:
-*
-* The scatter gather list processing must be thoroughly tested if changes are
-* made.	 Testing should include putting and committing single descriptors and
-* putting multiple descriptors followed by a single commit.  There are some
-* conditions in the code which handle the exception conditions.
-*
-* The Put Pointer points to the next location in the descriptor list to copy
-* in a new descriptor. The Get Pointer points to the next location in the
-* list to get a descriptor from.  The Get Pointer only allows software to
-* have a traverse the list after the hardware has finished processing some
-* number of descriptors.  The Commit Pointer points to the descriptor in the
-* list which is to be committed.  It is also used to determine that no
-* descriptor is waiting to be commited (NULL).	The Last Pointer points to
-* the last descriptor that was put into the list.  It typically points
-* to the previous descriptor to the one pointed to by the Put Pointer.
-* Comparisons are done between these pointers to determine when the following
-* special conditions exist.
-
-* Single Put And Commit
-*
-* The buffer descriptor is ready to be used by the hardware so it is important
-* for the descriptor to not appear to be waiting to be committed.  The commit
-* pointer is reset when a commit is done indicating there are no descriptors
-* waiting to be committed.  In all cases but this one, the descriptor is
-* changed to cause the hardware to go to the next descriptor after processing
-* this one.  But in this case, this is the last descriptor in the list such
-* that it must not be changed.
-*
-* 3 Or More Puts And Commit
-*
-* A series of 3 or more puts followed by a single commit is different in that
-* only the 1st descriptor put into the list is changed when the commit is done.
-* This requires each put starting on the 3rd to change the previous descriptor
-* so that it allows the hardware to continue to the next descriptor in the list.
-*
-* The 1st Put Following A Commit
-*
-* The commit caused the commit pointer to be NULL indicating that there are no
-* descriptors waiting to be committed.	It is necessary for the next put to set
-* the commit pointer so that a commit must follow the put for the hardware to
-* use the descriptor.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- ------------------------------------------------------
-* 1.00a rpm  02/03/03 Removed the XST_DMA_SG_COUNT_EXCEEDED return code
-*		      from SetPktThreshold.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xbuf_descriptor.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_SWCR_SG_ENABLE_MASK 0x80000000UL	/* scatter gather enable */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* the following macro copies selected fields of a buffer descriptor to another
- * buffer descriptor, this was provided by the buffer descriptor component but
- * was moved here since it is only used internally to this component and since
- * it does not copy all fields
- */
-#define CopyBufferDescriptor(InstancePtr, DestinationPtr)	   \
-{								   \
-    *((u32 *)DestinationPtr + XBD_CONTROL_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_CONTROL_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_SOURCE_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_SOURCE_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_DESTINATION_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_LENGTH_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_LENGTH_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_STATUS_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_STATUS_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_DEVICE_STATUS_OFFSET) =      \
-	*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET);      \
-    *((u32 *)DestinationPtr + XBD_ID_OFFSET) =		       \
-	*((u32 *)InstancePtr + XBD_ID_OFFSET);		       \
-    *((u32 *)DestinationPtr + XBD_FLAGS_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_FLAGS_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_RQSTED_LENGTH_OFFSET) =      \
-	*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET);      \
-}
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStart
-*
-* DESCRIPTION:
-*
-* This function starts a scatter gather operation for a scatter gather
-* DMA channel.	The first buffer descriptor in the buffer descriptor list
-* will be started with the scatter gather operation.  A scatter gather list
-* should have previously been created for the DMA channel and buffer
-* descriptors put into the scatter gather list such that there are scatter
-* operations ready to be performed.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was started successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates scatter gather was not started
-* because the scatter gather list of the DMA channel does not contain any
-* buffer descriptors that are ready to be processed by the hardware.
-*
-* A value of XST_DMA_SG_IS_STARTED indicates scatter gather was not started
-* because the scatter gather was not stopped, but was already started.
-*
-* A value of XST_DMA_SG_BD_NOT_COMMITTED indicates the buffer descriptor of
-* scatter gather list which was to be started is not committed to the list.
-* This status is more likely if this function is being called from an ISR
-* and non-ISR processing is putting descriptors into the list.
-*
-* A value of XST_DMA_SG_NO_DATA indicates that the buffer descriptor of the
-* scatter gather list which was to be started had already been used by the
-* hardware for a DMA transfer that has been completed.
-*
-* NOTES:
-*
-* It is the responsibility of the caller to get all the buffer descriptors
-* after performing a stop operation and before performing a start operation.
-* If buffer descriptors are not retrieved between stop and start operations,
-* buffer descriptors may be processed by the hardware more than once.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStart(XDmaChannel * InstancePtr)
-{
-	u32 Register;
-	XBufDescriptor *LastDescriptorPtr;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the scatter gather list exists but is empty then return a status */
-
-	if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_LIST_EMPTY;
-	}
-
-	/* if scatter gather is busy for the DMA channel, return a status because
-	 * restarting it could lose data
-	 */
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
-	if (Register & XDC_DMASR_SG_BUSY_MASK) {
-		return XST_DMA_SG_IS_STARTED;
-	}
-
-	/* get the address of the last buffer descriptor which the DMA hardware
-	 * finished processing
-	 */
-	LastDescriptorPtr =
-	    (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
-					XDC_BDA_REG_OFFSET);
-
-	/* setup the first buffer descriptor that will be sent when the scatter
-	 * gather channel is enabled, this is only necessary one time since
-	 * the BDA register of the channel maintains the last buffer descriptor
-	 * processed
-	 */
-	if (LastDescriptorPtr == NULL) {
-		XIo_Out32(InstancePtr->RegBaseAddress + XDC_BDA_REG_OFFSET,
-			  (u32) InstancePtr->GetPtr);
-	} else {
-		XBufDescriptor *NextDescriptorPtr;
-
-		/* get the next descriptor to be started, if the status indicates it
-		 * hasn't already been used by the h/w, then it's OK to start it,
-		 * s/w sets the status of each descriptor to busy and then h/w clears
-		 * the busy when it is complete
-		 */
-		NextDescriptorPtr =
-		    XBufDescriptor_GetNextPtr(LastDescriptorPtr);
-
-		if ((XBufDescriptor_GetStatus(NextDescriptorPtr) &
-		     XDC_DMASR_BUSY_MASK) == 0) {
-			return XST_DMA_SG_NO_DATA;
-		}
-		/* don't start the DMA SG channel if the descriptor to be processed
-		 * by h/w is to be committed by the s/w, this function can be called
-		 * such that it interrupts a thread that was putting into the list
-		 */
-		if (NextDescriptorPtr == InstancePtr->CommitPtr) {
-			return XST_DMA_SG_BD_NOT_COMMITTED;
-		}
-	}
-
-	/* start the scatter gather operation by clearing the stop bit in the
-	 * control register and setting the enable bit in the s/w control register,
-	 * both of these are necessary to cause it to start, right now the order of
-	 * these statements is important, the software control register should be
-	 * set 1st.  The other order can cause the CPU to have a loss of sync
-	 * because it cannot read/write the register while the DMA operation is
-	 * running
-	 */
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
-		  Register | XDC_SWCR_SG_ENABLE_MASK);
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET,
-		  Register & ~XDC_DMACR_SG_DISABLE_MASK);
-
-	/* indicate the DMA channel scatter gather operation was started
-	 * successfully
-	 */
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStop
-*
-* DESCRIPTION:
-*
-* This function stops a scatter gather operation for a scatter gather
-* DMA channel. This function starts the process of stopping a scatter
-* gather operation that is in progress and waits for the stop to be completed.
-* Since it waits for the operation to stopped before returning, this function
-* could take an amount of time relative to the size of the DMA scatter gather
-* operation which is in progress.  The scatter gather list of the DMA channel
-* is not modified by this function such that starting the scatter gather
-* channel after stopping it will cause it to resume.  This operation is
-* considered to be a graceful stop in that the scatter gather operation
-* completes the current buffer descriptor before stopping.
-*
-* If the interrupt is enabled, an interrupt will be generated when the
-* operation is stopped and the caller is responsible for handling the
-* interrupt.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is also a return value which contains a pointer to the
-* buffer descriptor which the scatter gather operation completed when it
-* was stopped.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was stopped successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_IS_STOPPED indicates scatter gather was not stoppped
-* because the scatter gather is not started, but was already stopped.
-*
-* BufDescriptorPtr contains a pointer to the buffer descriptor which was
-* completed when the operation was stopped.
-*
-* NOTES:
-*
-* This function implements a loop which polls the hardware for an infinite
-* amount of time. If the hardware is not operating correctly, this function
-* may never return.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStop(XDmaChannel * InstancePtr,
-		   XBufDescriptor ** BufDescriptorPtr)
-{
-	u32 Register;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufDescriptorPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the contents of the software control register, if scatter gather is not
-	 * enabled (started), then return a status because the disable acknowledge
-	 * would not be generated
-	 */
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
-	if ((Register & XDC_SWCR_SG_ENABLE_MASK) == 0) {
-		return XST_DMA_SG_IS_STOPPED;
-	}
-
-	/* Ensure the interrupt status for the scatter gather is cleared such
-	 * that this function will wait til the disable has occurred, writing
-	 * a 1 to only that bit in the register will clear only it
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
-		  XDC_IXR_SG_DISABLE_ACK_MASK);
-
-	/* disable scatter gather by writing to the software control register
-	 * without modifying any other bits of the register
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
-		  Register & ~XDC_SWCR_SG_ENABLE_MASK);
-
-	/* scatter gather does not disable immediately, but after the current
-	 * buffer descriptor is complete, so wait for the DMA channel to indicate
-	 * the disable is complete
-	 */
-	do {
-		Register =
-		    XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
-	} while ((Register & XDC_IXR_SG_DISABLE_ACK_MASK) == 0);
-
-	/* Ensure the interrupt status for the scatter gather disable is cleared,
-	 * writing a 1 to only that bit in the register will clear only it
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
-		  XDC_IXR_SG_DISABLE_ACK_MASK);
-
-	/* set the specified buffer descriptor pointer to point to the buffer
-	 * descriptor that the scatter gather DMA channel was processing
-	 */
-	*BufDescriptorPtr =
-	    (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
-					XDC_BDA_REG_OFFSET);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CreateSgList
-*
-* DESCRIPTION:
-*
-* This function creates a scatter gather list in the DMA channel.  A scatter
-* gather list consists of a list of buffer descriptors that are available to
-* be used for scatter gather operations.  Buffer descriptors are put into the
-* list to request a scatter gather operation to be performed.
-*
-* A number of buffer descriptors are created from the specified memory and put
-* into a buffer descriptor list as empty buffer descriptors. This function must
-* be called before non-empty buffer descriptors may be put into the DMA channel
-* to request scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* MemoryPtr contains a pointer to the memory which is to be used for buffer
-* descriptors and must not be cached.
-*
-* ByteCount contains the number of bytes for the specified memory to be used
-* for buffer descriptors.
-*
-* RETURN VALUE:
-*
-* A status contains XST_SUCCESS if the scatter gather list was successfully
-* created.
-*
-* A value of XST_DMA_SG_LIST_EXISTS indicates that the scatter gather list
-* was not created because the list has already been created.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
-			 u32 * MemoryPtr, u32 ByteCount)
-{
-	XBufDescriptor *BufferDescriptorPtr = (XBufDescriptor *) MemoryPtr;
-	XBufDescriptor *PreviousDescriptorPtr = NULL;
-	XBufDescriptor *StartOfListPtr = BufferDescriptorPtr;
-	u32 UsedByteCount;
-
-	/* assert to verify valid input arguments, alignment for those
-	 * arguments that have alignment restrictions, and at least enough
-	 * memory for one buffer descriptor
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(MemoryPtr != NULL);
-	XASSERT_NONVOID(((u32) MemoryPtr & 3) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(ByteCount >= sizeof (XBufDescriptor));
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the scatter gather list has already been created, then return
-	 * with a status
-	 */
-	if (InstancePtr->TotalDescriptorCount != 0) {
-		return XST_DMA_SG_LIST_EXISTS;
-	}
-
-	/* loop thru the specified memory block and create as many buffer
-	 * descriptors as possible putting each into the list which is
-	 * implemented as a ring buffer, make sure not to use any memory which
-	 * is not large enough for a complete buffer descriptor
-	 */
-	UsedByteCount = 0;
-	while ((UsedByteCount + sizeof (XBufDescriptor)) <= ByteCount) {
-		/* setup a pointer to the next buffer descriptor in the memory and
-		 * update # of used bytes to know when all of memory is used
-		 */
-		BufferDescriptorPtr = (XBufDescriptor *) ((u32) MemoryPtr +
-							  UsedByteCount);
-
-		/* initialize the new buffer descriptor such that it doesn't contain
-		 * garbage which could be used by the DMA hardware
-		 */
-		XBufDescriptor_Initialize(BufferDescriptorPtr);
-
-		/* if this is not the first buffer descriptor to be created,
-		 * then link it to the last created buffer descriptor
-		 */
-		if (PreviousDescriptorPtr != NULL) {
-			XBufDescriptor_SetNextPtr(PreviousDescriptorPtr,
-						  BufferDescriptorPtr);
-		}
-
-		/* always keep a pointer to the last created buffer descriptor such
-		 * that they can be linked together in the ring buffer
-		 */
-		PreviousDescriptorPtr = BufferDescriptorPtr;
-
-		/* keep a count of the number of descriptors in the list to allow
-		 * error processing to be performed
-		 */
-		InstancePtr->TotalDescriptorCount++;
-
-		UsedByteCount += sizeof (XBufDescriptor);
-	}
-
-	/* connect the last buffer descriptor created and inserted in the list
-	 * to the first such that a ring buffer is created
-	 */
-	XBufDescriptor_SetNextPtr(BufferDescriptorPtr, StartOfListPtr);
-
-	/* initialize the ring buffer to indicate that there are no
-	 * buffer descriptors in the list which point to valid data buffers
-	 */
-	InstancePtr->PutPtr = BufferDescriptorPtr;
-	InstancePtr->GetPtr = BufferDescriptorPtr;
-	InstancePtr->CommitPtr = NULL;
-	InstancePtr->LastPtr = BufferDescriptorPtr;
-	InstancePtr->ActiveDescriptorCount = 0;
-
-	/* indicate the scatter gather list was successfully created */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsSgListEmpty
-*
-* DESCRIPTION:
-*
-* This function determines if the scatter gather list of a DMA channel is
-* empty with regard to buffer descriptors which are pointing to buffers to be
-* used for scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A value of TRUE if the scatter gather list is empty, otherwise a value of
-* FALSE.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr)
-{
-	/* assert to verify valid input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the number of descriptors which are being used in the list is zero
-	 * then the list is empty
-	 */
-	return (InstancePtr->ActiveDescriptorCount == 0);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_PutDescriptor
-*
-* DESCRIPTION:
-*
-* This function puts a buffer descriptor into the DMA channel scatter
-* gather list. A DMA channel maintains a list of buffer descriptors which are
-* to be processed.  This function puts the specified buffer descriptor
-* at the next location in the list.  Note that since the list is already intact,
-* the information in the parameter is copied into the list (rather than modify
-* list pointers on the fly).
-*
-* After buffer descriptors are put into the list, they must also be committed
-* by calling another function.	This allows multiple buffer descriptors which
-* span a single packet to be put into the list while preventing the hardware
-* from starting the first buffer descriptor of the packet.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufferDescriptorPtr is a pointer to the buffer descriptor to be put into
-* the next available location of the scatter gather list.
-*
-* RETURN VALUE:
-*
-* A status which indicates XST_SUCCESS if the buffer descriptor was
-* successfully put into the scatter gather list.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_FULL indicates the buffer descriptor was not
-* put into the list because the list was full.
-*
-* A value of XST_DMA_SG_BD_LOCKED indicates the buffer descriptor was not
-* put into the list because the buffer descriptor in the list which is to
-* be overwritten was locked.  A locked buffer descriptor indicates the higher
-* layered software is still using the buffer descriptor.
-*
-* NOTES:
-*
-* It is necessary to create a scatter gather list for a DMA channel before
-* putting buffer descriptors into it.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
-			  XBufDescriptor * BufferDescriptorPtr)
-{
-	u32 Control;
-
-	/* assert to verify valid input arguments and alignment for those
-	 * arguments that have alignment restrictions
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferDescriptorPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferDescriptorPtr & 3) == 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the list is full because all descriptors are pointing to valid
-	 * buffers, then indicate an error, this code assumes no list or an
-	 * empty list is detected above
-	 */
-	if (InstancePtr->ActiveDescriptorCount ==
-	    InstancePtr->TotalDescriptorCount) {
-		return XST_DMA_SG_LIST_FULL;
-	}
-
-	/* if the buffer descriptor in the list which is to be overwritten is
-	 * locked, then don't overwrite it and return a status
-	 */
-	if (XBufDescriptor_IsLocked(InstancePtr->PutPtr)) {
-		return XST_DMA_SG_BD_LOCKED;
-	}
-
-	/* set the scatter gather stop bit in the control word of the descriptor
-	 * to cause the h/w to stop after it processes this descriptor since it
-	 * will be the last in the list
-	 */
-	Control = XBufDescriptor_GetControl(BufferDescriptorPtr);
-	XBufDescriptor_SetControl(BufferDescriptorPtr,
-				  Control | XDC_DMACR_SG_DISABLE_MASK);
-
-	/* set both statuses in the descriptor so we tell if they are updated with
-	 * the status of the transfer, the hardware should change the busy in the
-	 * DMA status to be false when it completes
-	 */
-	XBufDescriptor_SetStatus(BufferDescriptorPtr, XDC_DMASR_BUSY_MASK);
-	XBufDescriptor_SetDeviceStatus(BufferDescriptorPtr, 0);
-
-	/* copy the descriptor into the next position in the list so it's ready to
-	 * be used by the h/w, this assumes the descriptor in the list prior to this
-	 * one still has the stop bit in the control word set such that the h/w
-	 * use this one yet
-	 */
-	CopyBufferDescriptor(BufferDescriptorPtr, InstancePtr->PutPtr);
-
-	/* only the last in the list and the one to be committed have scatter gather
-	 * disabled in the control word, a commit requires only one descriptor
-	 * to be changed, when # of descriptors to commit > 2 all others except the
-	 * 1st and last have scatter gather enabled
-	 */
-	if ((InstancePtr->CommitPtr != InstancePtr->LastPtr) &&
-	    (InstancePtr->CommitPtr != NULL)) {
-		Control = XBufDescriptor_GetControl(InstancePtr->LastPtr);
-		XBufDescriptor_SetControl(InstancePtr->LastPtr,
-					  Control & ~XDC_DMACR_SG_DISABLE_MASK);
-	}
-
-	/* update the list data based upon putting a descriptor into the list,
-	 * these operations must be last
-	 */
-	InstancePtr->ActiveDescriptorCount++;
-
-	/* only update the commit pointer if it is not already active, this allows
-	 * it to be deactivated after every commit such that a single descriptor
-	 * which is committed does not appear to be waiting to be committed
-	 */
-	if (InstancePtr->CommitPtr == NULL) {
-		InstancePtr->CommitPtr = InstancePtr->LastPtr;
-	}
-
-	/* these updates MUST BE LAST after the commit pointer update in order for
-	 * the commit pointer to track the correct descriptor to be committed
-	 */
-	InstancePtr->LastPtr = InstancePtr->PutPtr;
-	InstancePtr->PutPtr = XBufDescriptor_GetNextPtr(InstancePtr->PutPtr);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CommitPuts
-*
-* DESCRIPTION:
-*
-* This function commits the buffer descriptors which have been put into the
-* scatter list for the DMA channel since the last commit operation was
-* performed.  This enables the calling functions to put several buffer
-* descriptors into the list (e.g.,a packet's worth) before allowing the scatter
-* gather operations to start.  This prevents the DMA channel hardware from
-* starting to use the buffer descriptors in the list before they are ready
-* to be used (multiple buffer descriptors for a single packet).
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the buffer descriptors of the list were
-* successfully committed.
-*
-* A value of XST_DMA_SG_NOTHING_TO_COMMIT indicates that the buffer descriptors
-* were not committed because there was nothing to commit in the list.  All the
-* buffer descriptors which are in the list are commited.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CommitPuts(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the buffer descriptor to be committed is already committed or
-	 * the list is empty (none have been put in), then indicate an error
-	 */
-	if ((InstancePtr->CommitPtr == NULL) ||
-	    XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_NOTHING_TO_COMMIT;
-	}
-
-	/* last descriptor in the list must have scatter gather disabled so the end
-	 * of the list is hit by h/w, if descriptor to commit is not last in list,
-	 * commit descriptors by enabling scatter gather in the descriptor
-	 */
-	if (InstancePtr->CommitPtr != InstancePtr->LastPtr) {
-		u32 Control;
-
-		Control = XBufDescriptor_GetControl(InstancePtr->CommitPtr);
-		XBufDescriptor_SetControl(InstancePtr->CommitPtr, Control &
-					  ~XDC_DMACR_SG_DISABLE_MASK);
-	}
-	/* Update the commit pointer to indicate that there is nothing to be
-	 * committed, this state is used by start processing to know that the
-	 * buffer descriptor to start is not waiting to be committed
-	 */
-	InstancePtr->CommitPtr = NULL;
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetDescriptor
-*
-* DESCRIPTION:
-*
-* This function gets a buffer descriptor from the scatter gather list of the
-* DMA channel. The buffer descriptor is retrieved from the scatter gather list
-* and the scatter gather list is updated to not include the retrieved buffer
-* descriptor.  This is typically done after a scatter gather operation
-* completes indicating that a data buffer has been successfully sent or data
-* has been received into the data buffer. The purpose of this function is to
-* allow the device using the scatter gather operation to get the results of the
-* operation.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is a pointer to a pointer to the buffer descriptor which
-* was retrieved from the list.	The buffer descriptor is not really removed
-* from the list, but it is changed to a state such that the hardware will not
-* use it again until it is put into the scatter gather list of the DMA channel.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if a buffer descriptor was retrieved from
-* the scatter gather list of the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates no buffer descriptor was
-* retrieved from the list because there are no buffer descriptors to be
-* processed in the list.
-*
-* BufDescriptorPtr is updated to point to the buffer descriptor which was
-* retrieved from the list if the status indicates success.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
-			  XBufDescriptor ** BufDescriptorPtr)
-{
-	u32 Control;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufDescriptorPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the buffer descriptor list is empty, then indicate an error */
-
-	if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_LIST_EMPTY;
-	}
-
-	/* retrieve the next buffer descriptor which is ready to be processed from
-	 * the buffer descriptor list for the DMA channel, set the control word
-	 * such that hardware will stop after the descriptor has been processed
-	 */
-	Control = XBufDescriptor_GetControl(InstancePtr->GetPtr);
-	XBufDescriptor_SetControl(InstancePtr->GetPtr,
-				  Control | XDC_DMACR_SG_DISABLE_MASK);
-
-	/* set the input argument, which is also an output, to point to the
-	 * buffer descriptor which is to be retrieved from the list
-	 */
-	*BufDescriptorPtr = InstancePtr->GetPtr;
-
-	/* update the pointer of the DMA channel to reflect the buffer descriptor
-	 * was retrieved from the list by setting it to the next buffer descriptor
-	 * in the list and indicate one less descriptor in the list now
-	 */
-	InstancePtr->GetPtr = XBufDescriptor_GetNextPtr(InstancePtr->GetPtr);
-	InstancePtr->ActiveDescriptorCount--;
-
-	return XST_SUCCESS;
-}
-
-/*********************** Interrupt Collescing Functions **********************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktCount
-*
-* DESCRIPTION:
-*
-* This function returns the value of the unserviced packet count register of
-* the DMA channel.  This count represents the number of packets that have been
-* sent or received by the hardware, but not processed by software.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The unserviced packet counter register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktCount(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the unserviced packet count from the register and return it */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_DecrementPktCount
-*
-* DESCRIPTION:
-*
-* This function decrements the value of the unserviced packet count register.
-* This informs the hardware that the software has processed a packet.  The
-* unserviced packet count register may only be decremented by one in the
-* hardware.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr)
-{
-	u32 Register;
-
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the unserviced packet count register can be decremented (rather
-	 * than rolling over) decrement it by writing a 1 to the register,
-	 * this is the only valid write to the register as it serves as an
-	 * acknowledge that a packet was handled by the software
-	 */
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
-	if (Register > 0) {
-		XIo_Out32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET,
-			  1UL);
-	}
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet count threshold register of the
-* DMA channel.	It reflects the number of packets that must be sent or
-* received before generating an interrupt.  This value helps implement
-* a concept called "interrupt coalescing", which is used to reduce the number
-* of interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* Threshold is the value that is written to the threshold register of the
-* DMA channel.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if the packet count threshold was
-* successfully set.
-*
-* NOTES:
-*
-* The packet threshold could be set to larger than the number of descriptors
-* allocated to the DMA channel. In this case, the wait bound will take over
-* and always indicate data arrival. There was a check in this function that
-* returned an error if the treshold was larger than the number of descriptors,
-* but that was removed because users would then have to set the threshold
-* only after they set descriptor space, which is an order dependency that
-* caused confustion.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold)
-{
-	/* assert to verify input arguments, don't assert the threshold since
-	 * it's range is unknown
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the packet count threshold in the register such that an interrupt
-	 * may be generated, if enabled, when the packet count threshold is
-	 * reached or exceeded
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET,
-		  (u32) Threshold);
-
-	/* indicate the packet count threshold was successfully set */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet count threshold register of the
-* DMA channel.	This value reflects the number of packets that must be sent or
-* received before generating an interrupt.  This value helps implement a concept
-* called "interrupt coalescing", which is used to reduce the number of
-* interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet threshold register contents for the DMA channel and is a value in
-* the range 0 - 1023.  A value of 0 indicates the packet wait bound timer is
-* disabled.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u8
-XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the packet count threshold from the register and return it,
-	 * since only 8 bits are used, cast it to return only those bits */
-
-	return (u8) XIo_In32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet wait bound register of the
-* DMA channel.	This value reflects the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* WaitBound is the value, in milliseconds, to be stored in the wait bound
-* register of the DMA channel and is a value in the range 0  - 1023.  A value
-* of 0 disables the packet wait bound timer.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(WaitBound < 1024);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the packet wait bound in the register such that interrupt may be
-	 * generated, if enabled, when packets have not been handled for a specific
-	 * amount of time
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET, WaitBound);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet wait bound register of the
-* DMA channel.	This value contains the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet wait bound register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the packet wait bound from the register and return it */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET);
-}
diff --git a/board/xilinx/common/xio.h b/board/xilinx/common/xio.h
deleted file mode 100644
index 5bb09c8940..0000000000
--- a/board/xilinx/common/xio.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * xio.h
- *
- * Defines XIo functions for Xilinx OCP in terms of Linux primitives
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef XIO_H
-#define XIO_H
-
-#include "xbasic_types.h"
-#include <asm/io.h>
-
-typedef u32 XIo_Address;
-
-extern inline u8
-XIo_In8(XIo_Address InAddress)
-{
-	return (u8) in_8((volatile unsigned char *) InAddress);
-}
-extern inline u16
-XIo_In16(XIo_Address InAddress)
-{
-	return (u16) in_be16((volatile unsigned short *) InAddress);
-}
-extern inline u32
-XIo_In32(XIo_Address InAddress)
-{
-	return (u32) in_be32((volatile unsigned *) InAddress);
-}
-extern inline void
-XIo_Out8(XIo_Address OutAddress, u8 Value)
-{
-	out_8((volatile unsigned char *) OutAddress, Value);
-}
-extern inline void
-XIo_Out16(XIo_Address OutAddress, u16 Value)
-{
-	out_be16((volatile unsigned short *) OutAddress, Value);
-}
-extern inline void
-XIo_Out32(XIo_Address OutAddress, u32 Value)
-{
-	out_be32((volatile unsigned *) OutAddress, Value);
-}
-
-#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
-#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
-#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
-#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
-
-#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
-#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
-#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
-#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
-
-#endif				/* XIO_H */
diff --git a/board/xilinx/common/xipif_v1_23_b.c b/board/xilinx/common/xipif_v1_23_b.c
deleted file mode 100644
index c7311ab9be..0000000000
--- a/board/xilinx/common/xipif_v1_23_b.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/* $Id: xipif_v1_23_b.c,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-*       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*       FOR A PARTICULAR PURPOSE.
-*
-*       (c) Copyright 2002 Xilinx Inc.
-*       All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XIpIf component. The
-* XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus.  The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased.  This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers.  A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices.  These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF.  The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture.  Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF.  This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC.  The device is made
-* up of several parts which include an IPIF and the IP.  The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs.  The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF.  The first
-* level, referred to as the device level, contains registers which are for the
-* entire device.  The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device.  The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* The interrupt registers of the IPIF are parameterizable such that the only
-* the number of bits necessary for the device are implemented. The functions
-* of this component do not attempt to validate that the passed in arguments are
-* valid based upon the number of implemented bits.  This is necessary to
-* maintain the level of performance required for the common components.  Bits
-* of the registers are assigned starting at the least significant bit of the
-* registers.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF.  This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations.  Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF.  Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl  02/27/01 Repartioned to reduce size
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xipif_v1_23_b.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constant is used to generate bit masks for register testing
- * in the self test functions, it defines the starting bit mask that is to be
- * shifted from the LSB to MSB in creating a register test mask
- */
-#define XIIF_V123B_FIRST_BIT_MASK     1UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-static XStatus IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth);
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XIpIf_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified IPIF component.  Many
-* of the registers in the IPIF are tested to ensure proper operation.  This
-* function is destructive because the IPIF is reset at the start of the test
-* and at the end of the test to ensure predictable results.  The IPIF reset
-* also resets the entire device that uses the IPIF.  This function exits with
-* all interrupts for the device disabled.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* DeviceRegistersWidth contains the number of bits in the device interrupt
-* registers. The hardware is parameterizable such that only the number of bits
-* necessary to support a device are implemented.  This value must be between 0
-* and 32 with 0 indicating there are no device interrupt registers used.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device.  The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented.  This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A value of XST_SUCCESS indicates the test was successful with no errors.
-* Any one of the following error values may also be returned.
-*
-*   XST_IPIF_RESET_REGISTER_ERROR       The value of a register at reset was
-*                                       not valid
-*   XST_IPIF_IP_STATUS_ERROR            A write to the IP interrupt status
-*                                       register did not read back correctly
-*   XST_IPIF_IP_ACK_ERROR               One or more bits in the IP interrupt
-*                                       status register did not reset when acked
-*   XST_IPIF_IP_ENABLE_ERROR            The IP interrupt enable register
-*                                       did not read back correctly based upon
-*                                       what was written to it
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant defines the maximum number of bits which may be
- * used in the registers at the device and IP levels, this is based upon the
- * number of bits available in the registers
- */
-#define XIIF_V123B_MAX_REG_BIT_COUNT 32
-
-XStatus
-XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth)
-{
-	XStatus Status;
-
-	/* assert to verify arguments are valid */
-
-	XASSERT_NONVOID(IpRegistersWidth <= XIIF_V123B_MAX_REG_BIT_COUNT);
-
-	/* reset the IPIF such that it's in a known state before the test
-	 * and interrupts are globally disabled
-	 */
-	XIIF_V123B_RESET(RegBaseAddress);
-
-	/* perform the self test on the IP interrupt registers, if
-	 * it is not successful exit with the status
-	 */
-	Status = IpIntrSelfTest(RegBaseAddress, IpRegistersWidth);
-	if (Status != XST_SUCCESS) {
-		return Status;
-	}
-
-	/* reset the IPIF such that it's in a known state before exiting test */
-
-	XIIF_V123B_RESET(RegBaseAddress);
-
-	/* reaching this point means there were no errors, return success */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* IpIntrSelfTest
-*
-* DESCRIPTION:
-*
-* Perform a self test on the IP interrupt registers of the IPIF. This
-* function modifies registers of the IPIF such that they are not guaranteed
-* to be in the same state when it returns.  Any bits in the IP interrupt
-* status register which are set are assumed to be set by default after a reset
-* and are not tested in the test.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device.  The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented.  This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the test was successful.  Otherwise, one
-* of the following values is returned.
-*
-*   XST_IPIF_RESET_REGISTER_ERROR       The value of a register at reset was
-*                                       not valid
-*   XST_IPIF_IP_STATUS_ERROR            A write to the IP interrupt status
-*                                       register did not read back correctly
-*   XST_IPIF_IP_ACK_ERROR               One or more bits in the IP status
-*                                       register did not reset when acked
-*   XST_IPIF_IP_ENABLE_ERROR            The IP interrupt enable register
-*                                       did not read back correctly based upon
-*                                       what was written to it
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth)
-{
-	/* ensure that the IP interrupt interrupt enable register is  zero
-	 * as it should be at reset, the interrupt status is dependent upon the
-	 * IP such that it's reset value is not known
-	 */
-	if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
-		return XST_IPIF_RESET_REGISTER_ERROR;
-	}
-
-	/* if there are any used IP interrupts, then test all of the interrupt
-	 * bits in all testable registers
-	 */
-	if (IpRegistersWidth > 0) {
-		u32 BitCount;
-		u32 IpInterruptMask = XIIF_V123B_FIRST_BIT_MASK;
-		u32 Mask = XIIF_V123B_FIRST_BIT_MASK;	/* bits assigned MSB to LSB */
-		u32 InterruptStatus;
-
-		/* generate the register masks to be used for IP register tests, the
-		 * number of bits supported by the hardware is parameterizable such
-		 * that only that number of bits are implemented in the registers, the
-		 * bits are allocated starting at the MSB of the registers
-		 */
-		for (BitCount = 1; BitCount < IpRegistersWidth; BitCount++) {
-			Mask = Mask << 1;
-			IpInterruptMask |= Mask;
-		}
-
-		/* get the current IP interrupt status register contents, any bits
-		 * already set must default to 1 at reset in the device and these
-		 * bits can't be tested in the following test, remove these bits from
-		 * the mask that was generated for the test
-		 */
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		IpInterruptMask &= ~InterruptStatus;
-
-		/* set the bits in the device status register and verify them by reading
-		 * the register again, all bits of the register are latched
-		 */
-		XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		if ((InterruptStatus & IpInterruptMask) != IpInterruptMask)
-		{
-			return XST_IPIF_IP_STATUS_ERROR;
-		}
-
-		/* test to ensure that the bits set in the IP interrupt status register
-		 * can be cleared by acknowledging them in the IP interrupt status
-		 * register then read it again and verify it was cleared
-		 */
-		XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		if ((InterruptStatus & IpInterruptMask) != 0) {
-			return XST_IPIF_IP_ACK_ERROR;
-		}
-
-		/* set the IP interrupt enable set register and then read the IP
-		 * interrupt enable register and verify the interrupts were enabled
-		 */
-		XIIF_V123B_WRITE_IIER(RegBaseAddress, IpInterruptMask);
-		if (XIIF_V123B_READ_IIER(RegBaseAddress) != IpInterruptMask) {
-			return XST_IPIF_IP_ENABLE_ERROR;
-		}
-
-		/* clear the IP interrupt enable register and then read the
-		 * IP interrupt enable register and verify the interrupts were disabled
-		 */
-		XIIF_V123B_WRITE_IIER(RegBaseAddress, 0);
-		if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
-			return XST_IPIF_IP_ENABLE_ERROR;
-		}
-	}
-	return XST_SUCCESS;
-}
diff --git a/board/xilinx/common/xipif_v1_23_b.h b/board/xilinx/common/xipif_v1_23_b.h
deleted file mode 100644
index 3ce1fffba5..0000000000
--- a/board/xilinx/common/xipif_v1_23_b.h
+++ /dev/null
@@ -1,746 +0,0 @@
-/* $Id: xipif_v1_23_b.h,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.h
-*
-* DESCRIPTION:
-*
-* The XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus.  The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased.	 This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers.  A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices.  These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF.  The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture.	 Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF.  This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC.  The device is made
-* up of several parts which include an IPIF and the IP.	 The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs.  The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF.  The first
-* level, referred to as the device level, contains registers which are for the
-* entire device.  The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device.	 The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF.  This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations.	 Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF.  Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl  02/27/01 Repartioned to minimize size
-*
-******************************************************************************/
-
-#ifndef XIPIF_H			/* prevent circular inclusions */
-#define XIPIF_H			/* by using protection macros */
-
-/***************************** Include Files *********************************/
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the register offsets for the registers of the
- * IPIF, there are some holes in the memory map for reserved addresses to allow
- * other registers to be added and still match the memory map of the interrupt
- * controller registers
- */
-#define XIIF_V123B_DISR_OFFSET	   0UL	/* device interrupt status register */
-#define XIIF_V123B_DIPR_OFFSET	   4UL	/* device interrupt pending register */
-#define XIIF_V123B_DIER_OFFSET	   8UL	/* device interrupt enable register */
-#define XIIF_V123B_DIIR_OFFSET	   24UL /* device interrupt ID register */
-#define XIIF_V123B_DGIER_OFFSET	   28UL /* device global interrupt enable reg */
-#define XIIF_V123B_IISR_OFFSET	   32UL /* IP interrupt status register */
-#define XIIF_V123B_IIER_OFFSET	   40UL /* IP interrupt enable register */
-#define XIIF_V123B_RESETR_OFFSET   64UL /* reset register */
-
-#define XIIF_V123B_RESET_MASK		  0xAUL
-
-/* the following constant is used for the device global interrupt enable
- * register, to enable all interrupts for the device, this is the only bit
- * in the register
- */
-#define XIIF_V123B_GINTR_ENABLE_MASK	  0x80000000UL
-
-/* the following constants contain the masks to identify each internal IPIF
- * condition in the device registers of the IPIF, interrupts are assigned
- * in the register from LSB to the MSB
- */
-#define XIIF_V123B_ERROR_MASK		  1UL	/* LSB of the register */
-
-/* The following constants contain interrupt IDs which identify each internal
- * IPIF condition, this value must correlate with the mask constant for the
- * error
- */
-#define XIIF_V123B_ERROR_INTERRUPT_ID	  0	/* interrupt bit #, (LSB = 0) */
-#define XIIF_V123B_NO_INTERRUPT_ID	  128	/* no interrupts are pending */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_RESET
-*
-* DESCRIPTION:
-*
-* Reset the IPIF component and hardware.  This is a destructive operation that
-* could cause the loss of data since resetting the IPIF of a device also
-* resets the device using the IPIF and any blocks, such as FIFOs or DMA
-* channels, within the IPIF.  All registers of the IPIF will contain their
-* reset value when this function returns.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant is used in the reset register to cause the IPIF to
- * reset
- */
-#define XIIF_V123B_RESET(RegBaseAddress) \
-    XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DISR
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt status register to the value.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF.  The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level rather
-* than a more detailed level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device.  Writing any of
-* the non-latched bits of the register will have no effect on the register.
-*
-* For the latched bits of this register only, setting a bit which is zero
-* within this register causes an interrupt to generated.  The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero.	This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes the specified value to the register such that
-* some bits may be set and others cleared.  It is the caller's responsibility
-* to get the value of the register prior to setting the value to prevent a
-* destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the interrupt status register of
-* the device.  The only bits which can be written are the latched bits which
-* contain the internal IPIF conditions.	 The following values may be used to
-* set the status register or clear an interrupt condition.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DISR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt status register contents.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF.  The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device.
-*
-* For only the latched bits of this register, the interrupt may be cleared by
-* writing to these bits in the status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the interrupt status register of
-* the device. The bit definitions are specific to the device with
-* the exception of the latched internal IPIF condition bits. The following
-* values may be used to detect internal IPIF conditions in the status.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DISR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DIER
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device are allowed to
-* generate an interrupt.  The device global interrupt enable register must also
-* be set appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  Setting a bit in this register enables that
-* interrupt source to generate an interrupt.  Clearing a bit in this register
-* disables interrupt generation for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupts source may be enabled and others disabled.  It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* An interrupt source may not be enabled to generate an interrupt, but can
-* still be polled in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the interrupt enable register
-* of the device.  The bit definitions are specific to the device with
-* the exception of the internal IPIF conditions. The following
-* values may be used to enable the internal IPIF conditions interrupts.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress,
-*					  u32 Enable)
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIER
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device
-* are allowed to generate an interrupt.	 The device global interrupt enable
-* register and the device interrupt enable register must also be set
-* appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  Setting a bit in this register enables that
-* interrupt source to generate an interrupt if the global enable is set
-* appropriately.  Clearing a bit in this register disables interrupt generation
-* for that interrupt source regardless of the global interrupt enable.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt enable register of the device.  The bit
-* definitions are specific to the device with the exception of the internal
-* IPIF conditions. The following values may be used to determine from the
-* value if the internal IPIF conditions interrupts are enabled.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIER(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIPR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt pending register contents.
-* This register indicates the pending interrupt sources, those that are waiting
-* to be serviced by the software, for a device which contains the IPIF.
-* An interrupt must be enabled in the interrupt enable register of the IPIF to
-* be pending.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* the device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched since the condition
-* is latched in the IP interrupt status register, by an internal block of the
-* IPIF such as a FIFO or DMA channel, or by the IP of the device.  This register
-* is read only and is not latched, but it is necessary to acknowledge (clear)
-* the interrupt condition by performing the appropriate processing for the IP
-* or block within the IPIF.
-*
-* This register can be thought of as the contents of the interrupt status
-* register ANDed with the contents of the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt pending register of the device.  The bit
-* definitions are specific to the device with the exception of the latched
-* internal IPIF condition bits. The following values may be used to detect
-* internal IPIF conditions in the value.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIPR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIIR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt ID for the highest priority interrupt
-* which is pending from the interrupt ID register. This function provides
-* priority resolution such that faster interrupt processing is possible.
-* Without priority resolution, it is necessary for the software to read the
-* interrupt pending register and then check each interrupt source to determine
-* if an interrupt is pending.  Priority resolution becomes more important as the
-* number of interrupt sources becomes larger.
-*
-* Interrupt priorities are based upon the bit position of the interrupt in the
-* interrupt pending register with bit 0 being the highest priority. The
-* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the
-* highest priority. The interrupt ID register is live rather than latched such
-* that multiple calls to this function may not yield the same results.	A
-* special value, outside of the interrupt priority range of 0 - 31, is
-* contained in the register which indicates that no interrupt is pending.  This
-* may be useful for allowing software to continue processing interrupts in a
-* loop until there are no longer any interrupts pending.
-*
-* The interrupt ID is designed to allow a function pointer table to be used
-* in the software such that the interrupt ID is used as an index into that
-* table.  The function pointer table could contain an instance pointer, such
-* as to DMA channel, and a function pointer to the function which handles
-* that interrupt.  This design requires the interrupt processing of the device
-* driver to be partitioned into smaller more granular pieces based upon
-* hardware used by the device, such as DMA channels and FIFOs.
-*
-* It is not mandatory that this function be used by the device driver software.
-* It may choose to read the pending register and resolve the pending interrupt
-* priorities on it's own.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* An interrupt ID, 0 - 31, which identifies the highest priority interrupt
-* which is pending.  A value of XIIF_NO_INTERRUPT_ID indicates that there is
-* no interrupt pending. The following values may be used to identify the
-* interrupt ID for the internal IPIF interrupts.
-*
-*   XIIF_V123B_ERROR_INTERRUPT_ID     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIIR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GLOBAL_INTR_DISABLE
-*
-* DESCRIPTION:
-*
-* This function disables all interrupts for the device by writing to the global
-* interrupt enable register.  This register provides the ability to disable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state.  The corresponding function, XIpIf_GlobalIntrEnable, is provided to
-* restore the interrupts to the previous enabled state.	 This function is
-* designed to be used in critical sections of device drivers such that it is
-* not necessary to disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GINTR_ENABLE
-*
-* DESCRIPTION:
-*
-* This function writes to the global interrupt enable register to enable
-* interrupts from the device.  This register provides the ability to enable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state.  This function does not enable individual interrupts as the interrupt
-* enable register must be set appropriately.  This function is designed to be
-* used in critical sections of device drivers such that it is not necessary to
-* disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress)		  \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \
-	       XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_IS_GINTR_ENABLED
-*
-* DESCRIPTION:
-*
-* This function determines if interrupts are enabled at the global level by
-* reading the gloabl interrupt register. This register provides the ability to
-* disable interrupts without any modifications to the interrupt enable register
-* such that it is minimal effort to restore the interrupts to the previous
-* enabled state.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* XTRUE if interrupts are enabled for the IPIF, XFALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress)		\
-    (XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) ==	\
-	      XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IISR
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt status register to the specified value.
-* This register indicates the status of interrupt sources for the IP of the
-* device.  The IP is defined as the part of the device that connects to the
-* IPIF.	 The status is independent of whether interrupts are enabled such that
-* the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  All bits of this register are latched. Setting a bit which is zero
-* within this register causes an interrupt to be generated.  The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero.	This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes only the specified value to the register such that
-* some status bits may be set and others cleared.  It is the caller's
-* responsibility to get the value of the register prior to setting the value
-* to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the IP interrupt status
-* register.  The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IISR
-*
-* DESCRIPTION:
-*
-* This function gets the contents of the IP interrupt status register.
-* This register indicates the status of interrupt sources for the IP of the
-* device.  The IP is defined as the part of the device that connects to the
-* IPIF. The status is independent of whether interrupts are enabled such
-* that the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device.  All bits of this register are latched.  Writing a 1 to a bit within
-* this register causes an interrupt to be generated if enabled in the interrupt
-* enable register and the global interrupt enable is set.  Since the status is
-* latched, each status bit must be acknowledged in order for the bit in the
-* status register to be updated.  Each bit can be acknowledged by writing a
-* 0 to the bit in the status register.
-
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the IP interrupt status register.
-* The bit definitions are specific to the device IP.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IISR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IIER
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt enable register contents.	 This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt.  The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  Setting a bit in this register enables the interrupt source to generate
-* an interrupt.	 Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupt sources may be enabled and others disabled.  It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the IP interrupt enable register.
-* The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IIER
-*
-* DESCRIPTION:
-*
-*
-* This function gets the IP interrupt enable register contents.	 This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt.  The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  Setting a bit in this register enables the interrupt source to generate
-* an interrupt.	 Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The contents read from the IP interrupt enable register.  The bit definitions
-* are specific to the device IP.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress)
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IIER(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET)
-
-/************************** Function Prototypes ******************************/
-
-/*
- * Initialization Functions
- */
-XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.c b/board/xilinx/common/xpacket_fifo_v1_00_b.c
deleted file mode 100644
index ae2d6d43c5..0000000000
--- a/board/xilinx/common/xpacket_fifo_v1_00_b.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.c
-*
-* Contains functions for the XPacketFifoV100b component. See xpacket_fifo_v1_00_b.h
-* for more information about the component.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02  First release
-* </pre>
-*
-*****************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xstatus.h"
-#include "xpacket_fifo_v1_00_b.h"
-
-/************************** Constant Definitions *****************************/
-
-/* width of a FIFO word */
-
-#define XPF_FIFO_WIDTH_BYTE_COUNT       4UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************* Variable Definitions ******************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/*
-*
-* This function initializes a packet FIFO.  Initialization resets the
-* FIFO such that it's empty and ready to use.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param RegBaseAddress contains the base address of the registers for
-*        the packet FIFO.
-* @param DataBaseAddress contains the base address of the data for
-*        the packet FIFO.
-*
-* @return
-*
-* Always returns XST_SUCCESS.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
-			    u32 RegBaseAddress, u32 DataBaseAddress)
-{
-	/* assert to verify input argument are valid */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	/* initialize the component variables to the specified state */
-
-	InstancePtr->RegBaseAddress = RegBaseAddress;
-	InstancePtr->DataBaseAddress = DataBaseAddress;
-	InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
-	/* reset the FIFO such that it's empty and ready to use and indicate the
-	 * initialization was successful, note that the is ready variable must be
-	 * set prior to calling the reset function to prevent an assert
-	 */
-	XPF_V100B_RESET(InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* This function performs a self-test on the specified packet FIFO.  The self
-* test resets the FIFO and reads a register to determine if it is the correct
-* reset value.  This test is destructive in that any data in the FIFO will
-* be lost.
-*
-* @param InstancePtr is a pointer to the packet FIFO to be operated on.
-*
-* @param FifoType specifies the type of FIFO, read or write, for the self test.
-*        The FIFO type is specified by the values XPF_READ_FIFO_TYPE or
-*        XPF_WRITE_FIFO_TYPE.
-*
-* @return
-*
-* XST_SUCCESS is returned if the selftest is successful, or
-* XST_PFIFO_BAD_REG_VALUE indicating that the value readback from the
-* occupancy/vacancy count register after a reset does not match the
-* specified reset value.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType)
-{
-	u32 Register;
-
-	/* assert to verify valid input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID((FifoType == XPF_READ_FIFO_TYPE) ||
-			(FifoType == XPF_WRITE_FIFO_TYPE));
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the fifo and then check to make sure the occupancy/vacancy
-	 * register contents are correct for a reset condition
-	 */
-	XPF_V100B_RESET(InstancePtr);
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress +
-			    XPF_COUNT_STATUS_REG_OFFSET);
-
-	/* check the value of the register to ensure that it's correct for the
-	 * specified FIFO type since both FIFO types reset to empty, but a bit
-	 * in the register changes definition based upon FIFO type
-	 */
-
-	if (FifoType == XPF_READ_FIFO_TYPE) {
-		/* check the regiser value for a read FIFO which should be empty */
-
-		if (Register != XPF_EMPTY_FULL_MASK) {
-			return XST_PFIFO_BAD_REG_VALUE;
-		}
-	} else {
-		/* check the register value for a write FIFO which should not be full
-		 * on reset
-		 */
-		if ((Register & XPF_EMPTY_FULL_MASK) != 0) {
-			return XST_PFIFO_BAD_REG_VALUE;
-		}
-	}
-
-	/* the test was successful */
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Read data from a FIFO and puts it into a specified buffer. The packet FIFO is
-* currently 32 bits wide such that an input buffer which is a series of bytes
-* is filled from the FIFO a word at a time. If the requested byte count is not
-* a multiple of 32 bit words, it is necessary for this function to format the
-* remaining 32 bit word from the FIFO into a series of bytes in the buffer.
-* There may be up to 3 extra bytes which must be extracted from the last word
-* of the FIFO and put into the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer to write the data into. This
-*        buffer must be 32 bit aligned or an alignment exception could be
-*        generated. Since this buffer is a byte buffer, the data is assumed to
-*        be endian independent.
-* @param ByteCount contains the number of bytes to read from the FIFO. This
-*        number of bytes must be present in the FIFO or an error will be
-*        returned.
-*
-* @return
-*
-* XST_SUCCESS indicates the operation was successful.  If the number of
-* bytes specified by the byte count is not present in the FIFO
-* XST_PFIFO_LACK_OF_DATA is returned.
-*
-* If the function was successful, the specified buffer is modified to contain
-* the bytes which were removed from the FIFO.
-*
-* @note
-*
-* Note that the exact number of bytes which are present in the FIFO is
-* not known by this function.  It can only check for a number of 32 bit
-* words such that if the byte count specified is incorrect, but is still
-* possible based on the number of words in the FIFO, up to 3 garbage bytes
-* may be present at the end of the buffer.
-* <br><br>
-* This function assumes that if the device consuming data from the FIFO is
-* a byte device, the order of the bytes to be consumed is from the most
-* significant byte to the least significant byte of a 32 bit word removed
-* from the FIFO.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
-		      u8 * BufferPtr, u32 ByteCount)
-{
-	u32 FifoCount;
-	u32 WordCount;
-	u32 ExtraByteCount;
-	u32 *WordBuffer = (u32 *) BufferPtr;
-
-	/* assert to verify valid input arguments including 32 bit alignment of
-	 * the buffer pointer
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferPtr &
-			 (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the count of how many 32 bit words are in the FIFO, if there aren't
-	 * enought words to satisfy the request, return an error
-	 */
-
-	FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
-			     XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
-	if ((FifoCount * XPF_FIFO_WIDTH_BYTE_COUNT) < ByteCount) {
-		return XST_PFIFO_LACK_OF_DATA;
-	}
-
-	/* calculate the number of words to read from the FIFO before the word
-	 * containing the extra bytes, and calculate the number of extra bytes
-	 * the extra bytes are defined as those at the end of the buffer when
-	 * the buffer does not end on a 32 bit boundary
-	 */
-	WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
-	ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
-	/* Read the 32 bit words from the FIFO for all the buffer except the
-	 * last word which contains the extra bytes, the following code assumes
-	 * that the buffer is 32 bit aligned, otherwise an alignment exception could
-	 * be generated
-	 */
-	for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
-		WordBuffer[FifoCount] = XIo_In32(InstancePtr->DataBaseAddress);
-	}
-
-	/* if there are extra bytes to handle, read the last word from the FIFO
-	 * and insert the extra bytes into the buffer
-	 */
-	if (ExtraByteCount > 0) {
-		u32 LastWord;
-		u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
-		/* get the last word from the FIFO for the extra bytes */
-
-		LastWord = XIo_In32(InstancePtr->DataBaseAddress);
-
-		/* one extra byte in the last word, put the byte into the next location
-		 * of the buffer, bytes in a word of the FIFO are ordered from most
-		 * significant byte to least
-		 */
-		if (ExtraByteCount == 1) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-		}
-
-		/* two extra bytes in the last word, put each byte into the next two
-		 * locations of the buffer
-		 */
-		else if (ExtraByteCount == 2) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-			ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
-		}
-		/* three extra bytes in the last word, put each byte into the next three
-		 * locations of the buffer
-		 */
-		else if (ExtraByteCount == 3) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-			ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
-			ExtraBytesBuffer[2] = (u8) (LastWord >> 8);
-		}
-	}
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Write data into a packet FIFO. The packet FIFO is currently 32 bits wide
-* such that an input buffer which is a series of bytes must be written into the
-* FIFO a word at a time. If the buffer is not a multiple of 32 bit words, it is
-* necessary for this function to format the remaining bytes into a single 32
-* bit word to be inserted into the FIFO. This is necessary to avoid any
-* accesses past the end of the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer that data is to be read from
-*        and written into the FIFO. Since this buffer is a byte buffer, the data
-*        is assumed to be endian independent. This buffer must be 32 bit aligned
-*        or an alignment exception could be generated.
-* @param ByteCount contains the number of bytes to read from the buffer and to
-*        write to the FIFO.
-*
-* @return
-*
-* XST_SUCCESS is returned if the operation succeeded.  If there is not enough
-* room in the FIFO to hold the specified bytes, XST_PFIFO_NO_ROOM is
-* returned.
-*
-* @note
-*
-* This function assumes that if the device inserting data into the FIFO is
-* a byte device, the order of the bytes in each 32 bit word is from the most
-* significant byte to the least significant byte.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
-		       u8 * BufferPtr, u32 ByteCount)
-{
-	u32 FifoCount;
-	u32 WordCount;
-	u32 ExtraByteCount;
-	u32 *WordBuffer = (u32 *) BufferPtr;
-
-	/* assert to verify valid input arguments including 32 bit alignment of
-	 * the buffer pointer
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferPtr &
-			 (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the count of how many words may be inserted into the FIFO */
-
-	FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
-			     XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
-	/* Calculate the number of 32 bit words required to insert the specified
-	 * number of bytes in the FIFO and determine the number of extra bytes
-	 * if the buffer length is not a multiple of 32 bit words
-	 */
-
-	WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
-	ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
-	/* take into account the extra bytes in the total word count */
-
-	if (ExtraByteCount > 0) {
-		WordCount++;
-	}
-
-	/* if there's not enough room in the FIFO to hold the specified
-	 * number of bytes, then indicate an error,
-	 */
-	if (FifoCount < WordCount) {
-		return XST_PFIFO_NO_ROOM;
-	}
-
-	/* readjust the word count to not take into account the extra bytes */
-
-	if (ExtraByteCount > 0) {
-		WordCount--;
-	}
-
-	/* Write all the bytes of the buffer which can be written as 32 bit
-	 * words into the FIFO, waiting to handle the extra bytes seperately
-	 */
-	for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
-		XIo_Out32(InstancePtr->DataBaseAddress, WordBuffer[FifoCount]);
-	}
-
-	/* if there are extra bytes to handle, extract them from the buffer
-	 * and create a 32 bit word and write it to the FIFO
-	 */
-	if (ExtraByteCount > 0) {
-		u32 LastWord = 0;
-		u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
-		/* one extra byte in the buffer, put the byte into the last word
-		 * to be inserted into the FIFO, perform this processing inline rather
-		 * than in a loop to help performance
-		 */
-		if (ExtraByteCount == 1) {
-			LastWord = ExtraBytesBuffer[0] << 24;
-		}
-
-		/* two extra bytes in the buffer, put each byte into the last word
-		 * to be inserted into the FIFO
-		 */
-		else if (ExtraByteCount == 2) {
-			LastWord = ExtraBytesBuffer[0] << 24 |
-			    ExtraBytesBuffer[1] << 16;
-		}
-
-		/* three extra bytes in the buffer, put each byte into the last word
-		 * to be inserted into the FIFO
-		 */
-		else if (ExtraByteCount == 3) {
-			LastWord = ExtraBytesBuffer[0] << 24 |
-			    ExtraBytesBuffer[1] << 16 |
-			    ExtraBytesBuffer[2] << 8;
-		}
-
-		/* write the last 32 bit word to the FIFO and return with no errors */
-
-		XIo_Out32(InstancePtr->DataBaseAddress, LastWord);
-	}
-
-	return XST_SUCCESS;
-}
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h
deleted file mode 100644
index 1cda0e8cc4..0000000000
--- a/board/xilinx/common/xpacket_fifo_v1_00_b.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.h
-*
-* This component is a common component because it's primary purpose is to
-* prevent code duplication in drivers. A driver which must handle a packet
-* FIFO uses this component rather than directly manipulating a packet FIFO.
-*
-* A FIFO is a device which has dual port memory such that one user may be
-* inserting data into the FIFO while another is consuming data from the FIFO.
-* A packet FIFO is designed for use with packet protocols such as Ethernet and
-* ATM.  It is typically only used with devices when DMA and/or Scatter Gather
-* is used.  It differs from a nonpacket FIFO in that it does not provide any
-* interrupts for thresholds of the FIFO such that it is less useful without
-* DMA.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This component provides the ability to
-* determine if that interrupt is active, a deadlock condition, and the ability
-* to reset the FIFO to clear the condition. In this condition, the device which
-* is using the FIFO should also be reset to prevent other problems. This error
-* condition could occur as a normal part of operation if the size of the FIFO
-* is not setup correctly.  See the hardware IP specification for more details.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02  First release
-* </pre>
-*
-*****************************************************************************/
-#ifndef XPACKET_FIFO_H		/* prevent circular inclusions */
-#define XPACKET_FIFO_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * These constants specify the FIFO type and are mutually exclusive
- */
-#define XPF_READ_FIFO_TYPE      0	/* a read FIFO */
-#define XPF_WRITE_FIFO_TYPE     1	/* a write FIFO */
-
-/*
- * These constants define the offsets to each of the registers from the
- * register base address, each of the constants are a number of bytes
- */
-#define XPF_RESET_REG_OFFSET            0UL
-#define XPF_MODULE_INFO_REG_OFFSET      0UL
-#define XPF_COUNT_STATUS_REG_OFFSET     4UL
-
-/*
- * This constant is used with the Reset Register
- */
-#define XPF_RESET_FIFO_MASK             0x0000000A
-
-/*
- * These constants are used with the Occupancy/Vacancy Count Register. This
- * register also contains FIFO status
- */
-#define XPF_COUNT_MASK                  0x0000FFFF
-#define XPF_DEADLOCK_MASK               0x20000000
-#define XPF_ALMOST_EMPTY_FULL_MASK      0x40000000
-#define XPF_EMPTY_FULL_MASK             0x80000000
-
-/**************************** Type Definitions *******************************/
-
-/*
- * The XPacketFifo driver instance data. The driver is required to allocate a
- * variable of this type for every packet FIFO in the device.
- */
-typedef struct {
-	u32 RegBaseAddress;	/* Base address of registers */
-	u32 IsReady;		/* Device is initialized and ready */
-	u32 DataBaseAddress;	/* Base address of data for FIFOs */
-} XPacketFifoV100b;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Reset the specified packet FIFO.  Resetting a FIFO will cause any data
-* contained in the FIFO to be lost.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_RESET(InstancePtr) \
-    XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
-
-/*****************************************************************************/
-/*
-*
-* Get the occupancy count for a read packet FIFO and the vacancy count for a
-* write packet FIFO. These counts indicate the number of 32-bit words
-* contained (occupancy) in the FIFO or the number of 32-bit words available
-* to write (vacancy) in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* The occupancy or vacancy count for the specified packet FIFO.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_GET_COUNT(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_COUNT_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost empty. Almost empty is
-* defined for a read FIFO when there is only one data word in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost full. Almost full is
-* defined for a write FIFO when there is only one available data word in the
-* FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is empty. This applies only to a
-* read FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is full. This applies only to a
-* write FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is deadlocked.  This condition occurs
-* when the FIFO is full and empty at the same time and is caused by a packet
-* being written to the FIFO which exceeds the total data capacity of the FIFO.
-* It occurs because of the mark/restore features of the packet FIFO which allow
-* retransmission of a packet. The software should reset the FIFO and any devices
-* using the FIFO when this condition occurs.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This function provides the ability to
-* determine if a deadlock condition, and the ability to reset the FIFO to
-* clear the condition.
-*
-* In this condition, the device which is using the FIFO should also be reset
-* to prevent other problems. This error condition could occur as a normal part
-* of operation if the size of the FIFO is not setup correctly.
-*
-* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_DEADLOCK_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* Standard functions */
-
-XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
-				    u32 RegBaseAddress, u32 DataBaseAddress);
-XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
-
-/* Data functions */
-
-XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
-			      u8 * ReadBufferPtr, u32 ByteCount);
-XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
-			       u8 * WriteBufferPtr, u32 ByteCount);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xstatus.h b/board/xilinx/common/xstatus.h
deleted file mode 100644
index ffda4d7d4d..0000000000
--- a/board/xilinx/common/xstatus.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xstatus.h
-*
-* This file contains Xilinx software status codes.  Status codes have their
-* own data type called XStatus.  These codes are used throughout the Xilinx
-* device drivers.
-*
-******************************************************************************/
-
-#ifndef XSTATUS_H		/* prevent circular inclusions */
-#define XSTATUS_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/*********************** Common statuses 0 - 500 *****************************/
-
-#define XST_SUCCESS                     0L
-#define XST_FAILURE                     1L
-#define XST_DEVICE_NOT_FOUND            2L
-#define XST_DEVICE_BLOCK_NOT_FOUND      3L
-#define XST_INVALID_VERSION             4L
-#define XST_DEVICE_IS_STARTED           5L
-#define XST_DEVICE_IS_STOPPED           6L
-#define XST_FIFO_ERROR                  7L	/* an error occurred during an
-						   operation with a FIFO such as
-						   an underrun or overrun, this
-						   error requires the device to
-						   be reset */
-#define XST_RESET_ERROR                 8L	/* an error occurred which requires
-						   the device to be reset */
-#define XST_DMA_ERROR                   9L	/* a DMA error occurred, this error
-						   typically requires the device
-						   using the DMA to be reset */
-#define XST_NOT_POLLED                  10L	/* the device is not configured for
-						   polled mode operation */
-#define XST_FIFO_NO_ROOM                11L	/* a FIFO did not have room to put
-						   the specified data into */
-#define XST_BUFFER_TOO_SMALL            12L	/* the buffer is not large enough
-						   to hold the expected data */
-#define XST_NO_DATA                     13L	/* there was no data available */
-#define XST_REGISTER_ERROR              14L	/* a register did not contain the
-						   expected value */
-#define XST_INVALID_PARAM               15L	/* an invalid parameter was passed
-						   into the function */
-#define XST_NOT_SGDMA                   16L	/* the device is not configured for
-						   scatter-gather DMA operation */
-#define XST_LOOPBACK_ERROR              17L	/* a loopback test failed */
-#define XST_NO_CALLBACK                 18L	/* a callback has not yet been
-						 * registered */
-#define XST_NO_FEATURE                  19L	/* device is not configured with
-						 * the requested feature */
-#define XST_NOT_INTERRUPT               20L	/* device is not configured for
-						 * interrupt mode operation */
-#define XST_DEVICE_BUSY                 21L	/* device is busy */
-#define XST_ERROR_COUNT_MAX             22L	/* the error counters of a device
-						 * have maxed out */
-#define XST_IS_STARTED                  23L	/* used when part of device is
-						 * already started i.e.
-						 * sub channel */
-#define XST_IS_STOPPED                  24L	/* used when part of device is
-						 * already stopped i.e.
-						 * sub channel */
-
-/***************** Utility Component statuses 401 - 500  *********************/
-
-#define XST_MEMTEST_FAILED              401L	/* memory test failed */
-
-/***************** Common Components statuses 501 - 1000 *********************/
-
-/********************* Packet Fifo statuses 501 - 510 ************************/
-
-#define XST_PFIFO_LACK_OF_DATA          501L	/* not enough data in FIFO   */
-#define XST_PFIFO_NO_ROOM               502L	/* not enough room in FIFO   */
-#define XST_PFIFO_BAD_REG_VALUE         503L	/* self test, a register value
-						   was invalid after reset */
-
-/************************** DMA statuses 511 - 530 ***************************/
-
-#define XST_DMA_TRANSFER_ERROR          511L	/* self test, DMA transfer
-						   failed */
-#define XST_DMA_RESET_REGISTER_ERROR    512L	/* self test, a register value
-						   was invalid after reset */
-#define XST_DMA_SG_LIST_EMPTY           513L	/* scatter gather list contains
-						   no buffer descriptors ready
-						   to be processed */
-#define XST_DMA_SG_IS_STARTED           514L	/* scatter gather not stopped */
-#define XST_DMA_SG_IS_STOPPED           515L	/* scatter gather not running */
-#define XST_DMA_SG_LIST_FULL            517L	/* all the buffer desciptors of
-						   the scatter gather list are
-						   being used */
-#define XST_DMA_SG_BD_LOCKED            518L	/* the scatter gather buffer
-						   descriptor which is to be
-						   copied over in the scatter
-						   list is locked */
-#define XST_DMA_SG_NOTHING_TO_COMMIT    519L	/* no buffer descriptors have been
-						   put into the scatter gather
-						   list to be commited */
-#define XST_DMA_SG_COUNT_EXCEEDED       521L	/* the packet count threshold
-						   specified was larger than the
-						   total # of buffer descriptors
-						   in the scatter gather list */
-#define XST_DMA_SG_LIST_EXISTS          522L	/* the scatter gather list has
-						   already been created */
-#define XST_DMA_SG_NO_LIST              523L	/* no scatter gather list has
-						   been created */
-#define XST_DMA_SG_BD_NOT_COMMITTED     524L	/* the buffer descriptor which was
-						   being started was not committed
-						   to the list */
-#define XST_DMA_SG_NO_DATA              525L	/* the buffer descriptor to start
-						   has already been used by the
-						   hardware so it can't be reused
-						 */
-
-/************************** IPIF statuses 531 - 550 ***************************/
-
-#define XST_IPIF_REG_WIDTH_ERROR        531L	/* an invalid register width
-						   was passed into the function */
-#define XST_IPIF_RESET_REGISTER_ERROR   532L	/* the value of a register at
-						   reset was not valid */
-#define XST_IPIF_DEVICE_STATUS_ERROR    533L	/* a write to the device interrupt
-						   status register did not read
-						   back correctly */
-#define XST_IPIF_DEVICE_ACK_ERROR       534L	/* the device interrupt status
-						   register did not reset when
-						   acked */
-#define XST_IPIF_DEVICE_ENABLE_ERROR    535L	/* the device interrupt enable
-						   register was not updated when
-						   other registers changed */
-#define XST_IPIF_IP_STATUS_ERROR        536L	/* a write to the IP interrupt
-						   status register did not read
-						   back correctly */
-#define XST_IPIF_IP_ACK_ERROR           537L	/* the IP interrupt status register
-						   did not reset when acked */
-#define XST_IPIF_IP_ENABLE_ERROR        538L	/* IP interrupt enable register was
-						   not updated correctly when other
-						   registers changed */
-#define XST_IPIF_DEVICE_PENDING_ERROR   539L	/* The device interrupt pending
-						   register did not indicate the
-						   expected value */
-#define XST_IPIF_DEVICE_ID_ERROR        540L	/* The device interrupt ID register
-						   did not indicate the expected
-						   value */
-
-/****************** Device specific statuses 1001 - 4095 *********************/
-
-/********************* Ethernet statuses 1001 - 1050 *************************/
-
-#define XST_EMAC_MEMORY_SIZE_ERROR  1001L	/* Memory space is not big enough
-						 * to hold the minimum number of
-						 * buffers or descriptors */
-#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L	/* Memory allocation failed */
-#define XST_EMAC_MII_READ_ERROR     1003L	/* MII read error */
-#define XST_EMAC_MII_BUSY           1004L	/* An MII operation is in progress */
-#define XST_EMAC_OUT_OF_BUFFERS     1005L	/* Adapter is out of buffers */
-#define XST_EMAC_PARSE_ERROR        1006L	/* Invalid adapter init string */
-#define XST_EMAC_COLLISION_ERROR    1007L	/* Excess deferral or late
-						 * collision on polled send */
-
-/*********************** UART statuses 1051 - 1075 ***************************/
-#define XST_UART
-
-#define XST_UART_INIT_ERROR         1051L
-#define XST_UART_START_ERROR        1052L
-#define XST_UART_CONFIG_ERROR       1053L
-#define XST_UART_TEST_FAIL          1054L
-#define XST_UART_BAUD_ERROR         1055L
-#define XST_UART_BAUD_RANGE         1056L
-
-/************************ IIC statuses 1076 - 1100 ***************************/
-
-#define XST_IIC_SELFTEST_FAILED         1076	/* self test failed            */
-#define XST_IIC_BUS_BUSY                1077	/* bus found busy              */
-#define XST_IIC_GENERAL_CALL_ADDRESS    1078	/* mastersend attempted with   */
-					     /* general call address        */
-#define XST_IIC_STAND_REG_RESET_ERROR   1079	/* A non parameterizable reg   */
-					     /* value after reset not valid */
-#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080	/* Tx fifo included in design  */
-					     /* value after reset not valid */
-#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081	/* Rx fifo included in design  */
-					     /* value after reset not valid */
-#define XST_IIC_TBA_REG_RESET_ERROR     1082	/* 10 bit addr incl in design  */
-					     /* value after reset not valid */
-#define XST_IIC_CR_READBACK_ERROR       1083	/* Read of the control register */
-					     /* didn't return value written */
-#define XST_IIC_DTR_READBACK_ERROR      1084	/* Read of the data Tx reg     */
-					     /* didn't return value written */
-#define XST_IIC_DRR_READBACK_ERROR      1085	/* Read of the data Receive reg */
-					     /* didn't return value written */
-#define XST_IIC_ADR_READBACK_ERROR      1086	/* Read of the data Tx reg     */
-					     /* didn't return value written */
-#define XST_IIC_TBA_READBACK_ERROR      1087	/* Read of the 10 bit addr reg */
-					     /* didn't return written value */
-#define XST_IIC_NOT_SLAVE               1088	/* The device isn't a slave    */
-
-/*********************** ATMC statuses 1101 - 1125 ***************************/
-
-#define XST_ATMC_ERROR_COUNT_MAX    1101L	/* the error counters in the ATM
-						   controller hit the max value
-						   which requires the statistics
-						   to be cleared */
-
-/*********************** Flash statuses 1126 - 1150 **************************/
-
-#define XST_FLASH_BUSY                1126L	/* Flash is erasing or programming */
-#define XST_FLASH_READY               1127L	/* Flash is ready for commands */
-#define XST_FLASH_ERROR               1128L	/* Flash had detected an internal
-						   error. Use XFlash_DeviceControl
-						   to retrieve device specific codes */
-#define XST_FLASH_ERASE_SUSPENDED     1129L	/* Flash is in suspended erase state */
-#define XST_FLASH_WRITE_SUSPENDED     1130L	/* Flash is in suspended write state */
-#define XST_FLASH_PART_NOT_SUPPORTED  1131L	/* Flash type not supported by
-						   driver */
-#define XST_FLASH_NOT_SUPPORTED       1132L	/* Operation not supported */
-#define XST_FLASH_TOO_MANY_REGIONS    1133L	/* Too many erase regions */
-#define XST_FLASH_TIMEOUT_ERROR       1134L	/* Programming or erase operation
-						   aborted due to a timeout */
-#define XST_FLASH_ADDRESS_ERROR       1135L	/* Accessed flash outside its
-						   addressible range */
-#define XST_FLASH_ALIGNMENT_ERROR     1136L	/* Write alignment error */
-#define XST_FLASH_BLOCKING_CALL_ERROR 1137L	/* Couldn't return immediately from
-						   write/erase function with
-						   XFL_NON_BLOCKING_WRITE/ERASE
-						   option cleared */
-#define XST_FLASH_CFI_QUERY_ERROR     1138L	/* Failed to query the device */
-
-/*********************** SPI statuses 1151 - 1175 ****************************/
-
-#define XST_SPI_MODE_FAULT          1151	/* master was selected as slave */
-#define XST_SPI_TRANSFER_DONE       1152	/* data transfer is complete */
-#define XST_SPI_TRANSMIT_UNDERRUN   1153	/* slave underruns transmit register */
-#define XST_SPI_RECEIVE_OVERRUN     1154	/* device overruns receive register */
-#define XST_SPI_NO_SLAVE            1155	/* no slave has been selected yet */
-#define XST_SPI_TOO_MANY_SLAVES     1156	/* more than one slave is being
-						 * selected */
-#define XST_SPI_NOT_MASTER          1157	/* operation is valid only as master */
-#define XST_SPI_SLAVE_ONLY          1158	/* device is configured as slave-only */
-#define XST_SPI_SLAVE_MODE_FAULT    1159	/* slave was selected while disabled */
-
-/********************** OPB Arbiter statuses 1176 - 1200 *********************/
-
-#define XST_OPBARB_INVALID_PRIORITY  1176	/* the priority registers have either
-						 * one master assigned to two or more
-						 * priorities, or one master not
-						 * assigned to any priority
-						 */
-#define XST_OPBARB_NOT_SUSPENDED     1177	/* an attempt was made to modify the
-						 * priority levels without first
-						 * suspending the use of priority
-						 * levels
-						 */
-#define XST_OPBARB_PARK_NOT_ENABLED  1178	/* bus parking by id was enabled but
-						 * bus parking was not enabled
-						 */
-#define XST_OPBARB_NOT_FIXED_PRIORITY 1179	/* the arbiter must be in fixed
-						 * priority mode to allow the
-						 * priorities to be changed
-						 */
-
-/************************ Intc statuses 1201 - 1225 **************************/
-
-#define XST_INTC_FAIL_SELFTEST      1201	/* self test failed */
-#define XST_INTC_CONNECT_ERROR      1202	/* interrupt already in use */
-
-/********************** TmrCtr statuses 1226 - 1250 **************************/
-
-#define XST_TMRCTR_TIMER_FAILED     1226	/* self test failed */
-
-/********************** WdtTb statuses 1251 - 1275 ***************************/
-
-#define XST_WDTTB_TIMER_FAILED      1251L
-
-/********************** PlbArb statuses 1276 - 1300 **************************/
-
-#define XST_PLBARB_FAIL_SELFTEST    1276L
-
-/********************** Plb2Opb statuses 1301 - 1325 *************************/
-
-#define XST_PLB2OPB_FAIL_SELFTEST   1301L
-
-/********************** Opb2Plb statuses 1326 - 1350 *************************/
-
-#define XST_OPB2PLB_FAIL_SELFTEST   1326L
-
-/********************** SysAce statuses 1351 - 1360 **************************/
-
-#define XST_SYSACE_NO_LOCK          1351L	/* No MPU lock has been granted */
-
-/********************** PCI Bridge statuses 1361 - 1375 **********************/
-
-#define XST_PCI_INVALID_ADDRESS     1361L
-
-/**************************** Type Definitions *******************************/
-
-/**
- * The status typedef.
- */
-typedef u32 XStatus;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xversion.c b/board/xilinx/common/xversion.c
deleted file mode 100644
index c8a6915858..0000000000
--- a/board/xilinx/common/xversion.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the implementation of the XVersion component. This
-* component represents a version ID.  It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision                  Range       Bit Positions
-*
-* Major Revision            0 - 9       Bits 15 - 12
-* Minor Revision            0 - 99      Bits 11 - 5
-* Compatability Revision    a - z       Bits 4 - 0
-</pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the masks and shift values to allow the
- * revisions to be packed and unpacked, a packed version is packed into a 16
- * bit value in the following format, XXXXYYYYYYYZZZZZ, where XXXX is the
- * major revision, YYYYYYY is the minor revision, and ZZZZZ is the compatability
- * revision
- */
-#define XVE_MAJOR_SHIFT_VALUE       12
-#define XVE_MINOR_ONLY_MASK         0x0FE0
-#define XVE_MINOR_SHIFT_VALUE       5
-#define XVE_COMP_ONLY_MASK          0x001F
-
-/* the following constants define the specific characters of a version string
- * for each character of the revision, a version string is in the following
- * format, "X.YYZ" where X is the major revision (0 - 9), YY is the minor
- * revision (00 - 99), and Z is the compatability revision (a - z)
- */
-#define XVE_MAJOR_CHAR      0	/* major revision 0 - 9 */
-#define XVE_MINOR_TENS_CHAR 2	/* minor revision tens 0 - 9 */
-#define XVE_MINOR_ONES_CHAR 3	/* minor revision ones 0 - 9 */
-#define XVE_COMP_CHAR       4	/* compatability revision a - z */
-#define XVE_END_STRING_CHAR 5
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-static u32 IsVersionStringValid(s8 * StringPtr);
-
-/*****************************************************************************
-*
-* Unpacks a packed version into the specified version. Versions are packed
-* into the configuration ROM to reduce the amount storage. A packed version
-* is a binary format as oppossed to a non-packed version which is implemented
-* as a string.
-*
-* @param    InstancePtr points to the version to unpack the packed version into.
-* @param    PackedVersion contains the packed version to unpack.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion)
-{
-	/* not implemented yet since CROM related */
-}
-
-/*****************************************************************************
-*
-* Packs a version into the specified packed version. Versions are packed into
-* the configuration ROM to reduce the amount storage.
-*
-* @param    InstancePtr points to the version to pack.
-* @param    PackedVersionPtr points to the packed version which will receive
-*           the new packed version.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the packing was accomplished
-* successfully, or an error, XST_INVALID_VERSION, indicating the specified
-* input version was not valid such that the pack did not occur
-* <br><br>
-* The packed version pointed to by PackedVersionPtr is modified with the new
-* packed version if the status indicates success.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersionPtr)
-{
-	/* not implemented yet since CROM related */
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Determines if two versions are equal.
-*
-* @param    InstancePtr points to the first version to be compared.
-* @param    VersionPtr points to a second version to be compared.
-*
-* @return
-*
-* TRUE if the versions are equal, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-u32
-XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr)
-{
-	u8 *Version1 = (u8 *) InstancePtr;
-	u8 *Version2 = (u8 *) VersionPtr;
-	int Index;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(VersionPtr != NULL);
-
-	/* check each byte of the versions to see if they are the same,
-	 * return at any point a byte differs between them
-	 */
-	for (Index = 0; Index < sizeof (XVersion); Index++) {
-		if (Version1[Index] != Version2[Index]) {
-			return FALSE;
-		}
-	}
-
-	/* No byte was found to be different between the versions, so indicate
-	 * the versions are equal
-	 */
-	return TRUE;
-}
-
-/*****************************************************************************
-*
-* Converts a version to a null terminated string.
-*
-* @param    InstancePtr points to the version to convert.
-* @param    StringPtr points to the string which will be the result of the
-*           conversion. This does not need to point to a null terminated
-*           string as an input, but must point to storage which is an adequate
-*           amount to hold the result string.
-*
-* @return
-*
-* The null terminated string is inserted at the location pointed to by
-* StringPtr if the status indicates success.
-*
-* @note
-*
-* It is necessary for the caller to have already allocated the storage to
-* contain the string.  The amount of memory necessary for the string is
-* specified in the version header file.
-*
-******************************************************************************/
-void
-XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(StringPtr != NULL);
-
-	/* since version is implemented as a string, just copy the specified
-	 * input into the specified output
-	 */
-	XVersion_Copy(InstancePtr, (XVersion *) StringPtr);
-}
-
-/*****************************************************************************
-*
-* Initializes a version from a null terminated string. Since the string may not
-* be a format which is compatible with the version, an error could occur.
-*
-* @param    InstancePtr points to the version which is to be initialized.
-* @param    StringPtr points to a null terminated string which will be
-*           converted to a version.  The format of the string must match the
-*           version string format which is X.YYX where X = 0 - 9, YY = 00 - 99,
-*           Z = a - z.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the conversion was accomplished
-* successfully, or XST_INVALID_VERSION indicating the version string format
-* was not valid.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(StringPtr != NULL);
-
-	/* if the version string specified is not valid, return an error */
-
-	if (!IsVersionStringValid(StringPtr)) {
-		return XST_INVALID_VERSION;
-	}
-
-	/* copy the specified string into the specified version and indicate the
-	 * conversion was successful
-	 */
-	XVersion_Copy((XVersion *) StringPtr, InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Copies the contents of a version to another version.
-*
-* @param    InstancePtr points to the version which is the source of data for
-*           the copy operation.
-* @param    VersionPtr points to another version which is the destination of
-*           the copy operation.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr)
-{
-	u8 *Source = (u8 *) InstancePtr;
-	u8 *Destination = (u8 *) VersionPtr;
-	int Index;
-
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(VersionPtr != NULL);
-
-	/* copy each byte of the source version to the destination version */
-
-	for (Index = 0; Index < sizeof (XVersion); Index++) {
-		Destination[Index] = Source[Index];
-	}
-}
-
-/*****************************************************************************
-*
-* Determines if the specified version is valid.
-*
-* @param    StringPtr points to the string to be validated.
-*
-* @return
-*
-* TRUE if the version string is a valid format, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static u32
-IsVersionStringValid(s8 * StringPtr)
-{
-	/* if the input string is not a valid format, "X.YYZ" where X = 0 - 9,
-	 * YY = 00 - 99, and Z = a - z, then indicate it's not valid
-	 */
-	if ((StringPtr[XVE_MAJOR_CHAR] < '0') ||
-	    (StringPtr[XVE_MAJOR_CHAR] > '9') ||
-	    (StringPtr[XVE_MINOR_TENS_CHAR] < '0') ||
-	    (StringPtr[XVE_MINOR_TENS_CHAR] > '9') ||
-	    (StringPtr[XVE_MINOR_ONES_CHAR] < '0') ||
-	    (StringPtr[XVE_MINOR_ONES_CHAR] > '9') ||
-	    (StringPtr[XVE_COMP_CHAR] < 'a') ||
-	    (StringPtr[XVE_COMP_CHAR] > 'z')) {
-		return FALSE;
-	}
-
-	return TRUE;
-}
diff --git a/board/xilinx/common/xversion.h b/board/xilinx/common/xversion.h
deleted file mode 100644
index 17f9da7a02..0000000000
--- a/board/xilinx/common/xversion.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the interface for the XVersion component. This
-* component represents a version ID.  It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision                  Range       Bit Positions
-*
-* Major Revision            0 - 9       Bits 15 - 12
-* Minor Revision            0 - 99      Bits 11 - 5
-* Compatability Revision    a - z       Bits 4 - 0
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XVERSION_H		/* prevent circular inclusions */
-#define XVERSION_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/* the following data type is used to hold a null terminated version string
- * consisting of the following format, "X.YYX"
- */
-typedef s8 XVersion[6];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-void XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion);
-
-XStatus XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersion);
-
-u32 XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr);
-
-void XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr);
-
-XStatus XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr);
-
-void XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
deleted file mode 100644
index 02c22fbef1..0000000000
--- a/board/xilinx/ml300/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-$(shell mkdir -p $(obj)../xilinx_iic)
-endif
-
-INCS		:= -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
-CFLAGS		+= $(INCS)
-HOST_CFLAGS	+= $(INCS)
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o \
-	  serial.o \
-	  ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
-	  ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
-	  ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
-	  ../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
-	  ../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
-	  ../common/xbasic_types.o ../common/xdma_channel.o \
-	  ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
-	  ../common/xversion.o \
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/xilinx/ml300/config.mk b/board/xilinx/ml300/config.mk
deleted file mode 100644
index 57ddb2fd7a..0000000000
--- a/board/xilinx/ml300/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0x04000000
diff --git a/board/xilinx/ml300/init.S b/board/xilinx/ml300/init.S
deleted file mode 100644
index f753df851a..0000000000
--- a/board/xilinx/ml300/init.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * init.S: Stubs for U-Boot initialization
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-	.globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	blr
-
-	.globl sdram_init
-sdram_init:
-	blr
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
deleted file mode 100644
index dad562f1c7..0000000000
--- a/board/xilinx/ml300/ml300.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * ml300.c: U-Boot platform support for Xilinx ML300 board
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include "xparameters.h"
-
-#ifdef CFG_ENV_IS_IN_EEPROM
-extern void convert_env(void);
-#endif
-
-int
-board_pre_init(void)
-{
-	return 0;
-}
-
-int
-checkboard(void)
-{
-	char tmp[64];		/* long enough for environment variables */
-	char *s, *e;
-	int i = getenv_r("L", tmp, sizeof (tmp));
-
-	if (i < 0) {
-		printf("### No HW ID - assuming ML300");
-	} else {
-		for (e = tmp; *e; ++e) {
-			if (*e == ' ')
-				break;
-		}
-
-		printf("### Board Serial# is ");
-
-		for (s = tmp; s < e; ++s) {
-			putc(*s);
-		}
-
-	}
-	putc('\n');
-
-	return (0);
-}
-
-long int
-initdram(int board_type)
-{
-	return 128 * 1024 * 1024;
-}
-
-int
-testdram(void)
-{
-	printf("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* implement functions originally in cpu/ppc4xx/speed.c */
-void
-get_sys_info(sys_info_t * sysInfo)
-{
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-
-	/* only correct if the PLB and OPB run at the same frequency */
-	sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
-}
-
-ulong
-get_PCI_freq(void)
-{
-	ulong val;
-	PPC405_SYS_INFO sys_info;
-
-	get_sys_info(&sys_info);
-	val = sys_info.freqPCI;
-	return val;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-
-int
-misc_init_r()
-{
-	/* convert env name and value to u-boot standard */
-	convert_env();
-	return 0;
-}
-
-#endif
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
deleted file mode 100644
index c204b88e41..0000000000
--- a/board/xilinx/ml300/serial.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <asm/u-boot.h>
-#include <asm/processor.h>
-#include <common.h>
-#include <command.h>
-#include <configs/ml300.h>
-#include "xparameters.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define USE_CHAN1 \
-	((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1))
-#define USE_CHAN2 \
-	((defined XPAR_UARTNS550_1_BASEADDR) && (defined CFG_INIT_CHAN2))
-
-#if USE_CHAN1
-#include <ns16550.h>
-#endif
-
-#if USE_CHAN1
-const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3)
-#if USE_CHAN2
-	    , (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3)
-#endif
-};
-#endif
-
-int
-serial_init(void)
-{
-#if USE_CHAN1
-	int clock_divisor;
-
-	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	(void) NS16550_init(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
-	clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	(void) NS16550_init(COM_PORTS[1], clock_divisor);
-#endif
-#endif
-	return 0;
-
-}
-
-void
-serial_putc(const char c)
-{
-	if (c == '\n')
-		NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
-
-	NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
-}
-
-int
-serial_getc(void)
-{
-	return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
-}
-
-int
-serial_tstc(void)
-{
-	return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
-}
-
-void
-serial_setbrg(void)
-{
-#if USE_CHAN1
-	int clock_divisor;
-
-	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	NS16550_reinit(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
-	clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	NS16550_reinit(COM_PORTS[1], clock_divisor);
-#endif
-#endif
-}
-
-void
-serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void
-kgdb_serial_init(void)
-{
-}
-
-void
-putDebugChar(int c)
-{
-	serial_putc(c);
-}
-
-void
-putDebugStr(const char *str)
-{
-	serial_puts(str);
-}
-
-int
-getDebugChar(void)
-{
-	return serial_getc();
-}
-
-void
-kgdb_interruptible(int yes)
-{
-	return;
-}
-#endif				/* CFG_CMD_KGDB */
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
deleted file mode 100644
index 9daf147096..0000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-
-if [ $# -ne 1 ]
-then
-    echo "usage: Ltypes filename" >&2
-    exit 2
-fi
-
-FILE="$1"
-#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1
-TMPFILE=${FILE}.`date "+%s"`
-touch $TMPFILE || exit 1
-
-# Change all the Xilinx types to Linux types and put the result into a temp file
-sed	\
-	-e 's/\bXTRUE\b/TRUE/g' \
-	-e 's/\bXFALSE\b/FALSE/g' \
-	-e 's/\bXNULL\b/NULL/g' \
-	-e 's/"xenv.h"/<asm\/delay.h>/g' \
-	-e 's/\bXENV_USLEEP\b/udelay/g' \
-	-e 's/\bXuint8\b/u8/g' \
-	-e 's/\bXuint16\b/u16/g' \
-	-e 's/\bXuint32\b/u32/g' \
-	-e 's/\bXint8\b/s8/g' \
-	-e 's/\bXint16\b/s16/g' \
-	-e 's/\bXint32\b/s32/g' \
-	-e 's/\bXboolean\b/u32/g' \
-	"${FILE}" > "${TMPFILE}"
-
-# Overlay the original file with the temp file
-mv "${TMPFILE}" "${FILE}"
-
-# Are we doing xbasic_types.h?
-if [ "${FILE##*/}" = xbasic_types.h ]
-then
-    # Remember as you're reading this that we've already gone through the prior
-    # sed script.  We need to do some other things to xbasic_types.h:
-    #   1) Add ifndefs around TRUE and FALSE defines
-    #   2) Remove definition of NULL as NULL
-    #   3) Replace most of the primitive types section with a #include
-    sed \
-	-e '/u32 true/,/#define false/Ic\
-#ifndef TRUE\
-#define TRUE 1\
-#endif\
-#ifndef FALSE\
-#define FALSE 0\
-#endif' \
-	-e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \
-	-e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
-#include <linux/types.h>' \
-	"${FILE}" > "${TMPFILE}"
-
-    mv "${TMPFILE}" "${FILE}"
-fi
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
deleted file mode 100644
index 516924126d..0000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
+++ /dev/null
@@ -1,52 +0,0 @@
-# (c) Copyright 2004 Xilinx Inc.
-#     Author: Xilinx, Inc.
-#
-#
-#     This program is free software; you can redistribute it and/or modify it
-#     under the terms of the GNU General Public License as published by the
-#     Free Software Foundation; either version 2 of the License, or (at your
-#     option) any later version.
-#
-#
-#     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-#     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-#     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-#     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-#     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-#     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-#     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-#     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-#     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-#     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-#     FITNESS FOR A PARTICULAR PURPOSE.
-#
-#
-#     Xilinx hardware products are not intended for use in life support
-#     appliances, devices, or systems. Use in such applications is
-#     expressly prohibited.
-#
-#
-#     (c) Copyright 2002-2004 Xilinx Inc.
-#     All rights reserved.
-#
-#
-#     You should have received a copy of the GNU General Public License along
-#     with this program; if not, write to the Free Software Foundation, Inc.,
-#     675 Mass Ave, Cambridge, MA 02139, USA.
-
-OPTION psf_version = 2.1;
-
-BEGIN LIBRARY uboot OPTION DRC = uboot_drc;
-
-BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
-PROPERTY size = 0;
-PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
-END ARRAY
-    PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string;
-
-# location of persistent storage in the IIC EEPROM (defaults are set for ML300)
-PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024;
-PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047;
-PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0;
-
-END LIBRARY
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
deleted file mode 100644
index 9d44f4493d..0000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
+++ /dev/null
@@ -1,325 +0,0 @@
-#
-#      Author: Xilinx, Inc.
-#      
-#      
-#      This program is free software; you can redistribute it and/or modify it
-#      under the terms of the GNU General Public License as published by the
-#      Free Software Foundation; either version 2 of the License, or (at your
-#      option) any later version.
-#      
-#      
-#      XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-#      COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-#      ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-#      XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-#      FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-#      ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-#      XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-#      THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-#      WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-#      CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-#      FITNESS FOR A PARTICULAR PURPOSE.
-#      
-#      
-#      Xilinx hardware products are not intended for use in life support
-#      appliances, devices, or systems. Use in such applications is
-#      expressly prohibited.
-#      
-#      
-#      (c) Copyright 2002-2004 Xilinx Inc.
-#      All rights reserved.
-#      
-#      
-#      You should have received a copy of the GNU General Public License along
-#      with this program; if not, write to the Free Software Foundation, Inc.,
-#      675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# Globals
-lappend drvlist
-set ltypes "../../../sw_services/uboot_v1_00_a/data/Ltypes"
-
-proc uboot_drc {lib_handle} {
-    puts "U-Boot DRC..."
-}
-
-proc generate {libname} {
-    
-    global drvlist
-    
-    # Get list of peripherals connected to uboot
-    set conn_periphs [xget_handle $libname "ARRAY" "connected_periphs"]
-    #lappend drvlist
-    if {[string compare -nocase $conn_periphs ""] != 0} {
-	set conn_periphs_elems [xget_handle $conn_periphs "ELEMENTS" "*"]
-	# For each periph
-	foreach periph_elem $conn_periphs_elems {
-	    set periph [xget_value $periph_elem "PARAMETER" "periph_name"]
-	    # 1. Get driver
-	    set drv [xget_swhandle $periph]
-	    set posn [lsearch -exact $drvlist $drv]
-	    if {$posn == -1} {
-		lappend drvlist $drv
-	    }
-	}
-	
-	set file_handle [xopen_include_file "xparameters.h"]
-	puts $file_handle "\n/******************************************************************/\n"
-	puts $file_handle "/* U-Boot Redefines */"
-	puts $file_handle "\n/******************************************************************/\n"
-	close $file_handle
-	
-	foreach drv $drvlist {
-	    set drvname [xget_value $drv "NAME"]
-	    
-	    #Redefines xparameters.h
-	    if {[string compare -nocase $drvname "uartns550"] == 0} {
-		xredefine_uartns550 $drv "xparameters.h"
-	    }  elseif {[string compare -nocase $drvname "emac"] == 0} {
-		xredefine_emac $drv "xparameters.h"
-	    }  elseif {[string compare -nocase $drvname "iic"] == 0} {
-		xredefine_iic $drv "xparameters.h"
-	    }
-	}
-    }
-    
-    # define core_clock
-    xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ"
-
-    # define the values for the persistent storage in IIC
-    xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR"
-
-}
-
-proc xget_corefreq {} {
-    set processor [xget_processor] 
-    set name [xget_value $processor "NAME"]
-    puts "procname : $name"
-    set processor_driver [xget_swhandle [xget_value $processor "NAME"]]
-    puts "procdrv : $processor_driver"
-    if {[string compare -nocase $processor_driver ""] != 0} {
-	set arg "CORE_CLOCK_FREQ_HZ"
-	#set retval [xget_value $processor_driver "PARAMETER" $arg]
-	set retval [xget_dname [xget_value $processor_driver "NAME"] $arg]
-	return $retval
-    }
-}
-
-# procedure that adds # defines to xparameters.h as XPAR_argument
-proc xredefine_params {handle file_name args} {
-    
-    puts "xredfine ..."
-    # Open include file
-    set file_handle [xopen_include_file $file_name]
-    puts "args : $args"
-
-    foreach arg $args {
-	if {[string compare -nocase $arg "CORE_CLOCK_FREQ_HZ"] == 0} {
-	    set value [xget_corefreq]
-	    puts "corefreq : $value"
-	} else {
-	    set value [xget_value $handle "PARAMETER" $arg]
-	    puts "value : $value"
-	}
-	
-	if {$value != ""} {
-	    set value [xformat_addr_string $value $arg]
-
-	    if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_BASEADDR"
-	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_HIGHADDR"
-	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_EEPROMADDR"
-	    } else {
-		set name [string toupper $arg]
-	    }
-	    set name [format "XPAR_%s" $name]
-	    puts $file_handle "#define $name $value"
-	}
-    }
-
-    puts $file_handle "\n/******************************************************************/\n"
-    close $file_handle
-}
-
-# uart redefines...
-proc xredefine_uartns550 {drvhandle file_name} {
-    
-    xredefine_include_file $drvhandle $file_name "uartns550" "C_BASEADDR" "C_HIGHADDR" "CLOCK_HZ" "DEVICE_ID"
-    
-}
-
-proc xredefine_emac {drvhandle file_name} {
-    
-    xredefine_include_file $drvhandle $file_name "emac" "C_BASEADDR" "C_HIGHADDR" "C_DMA_PRESENT" "C_MII_EXIST" "C_ERR_COUNT_EXIST" "DEVICE_ID"
-    
-}
-
-proc xredefine_iic {drvhandle file_name} {
-    xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID"
-
-}
-
-#######################
-
-proc xredefine_include_file {drv_handle file_name drv_string args} {
-    
-    # Open include file
-    set file_handle [xopen_include_file $file_name]
-    
-    # Get all peripherals connected to this driver
-    set periphs [xget_periphs $drv_handle] 
-    
-    set pname [format "XPAR_%s_" [string toupper $drv_string]]
-    
-    # Print all parameters for all peripherals
-    set device_id 0
-    set sub_periphs 1
-    foreach periph $periphs {
-	puts "$periph : $drv_string : $sub_periphs"
-
-	for {set i 0} {$i < $sub_periphs} {incr i} {
-	    foreach arg $args {
-		set name "${pname}${device_id}_"
-	    
-		if {[string compare -nocase "CLOCK_HZ" $arg] == 0} {
-		    set xdrv_string [format "%s%s" "X" $drv_string]
-		    set value [xget_dname $xdrv_string $arg]
-		    set name "${name}CLOCK_FREQ_HZ"
-		} else {
-		    if {[string match C_* $arg]} {
-			set name [format "%s%s" $name [string range $arg 2 end]]
-		    } else {
-			set name "${name}${arg}"
-		    }
-		    set value [xget_name $periph $arg]
-		}
-
-		if {[string compare -nocase "uartns550" $drv_string] == 0} {
-		    if {[string compare -nocase "C_BASEADDR" $arg] == 0} {
-			set value [format "(%s%s%s)" $value "+" "0x1000"]
-		    }
-		}
-
-		puts $file_handle "#define $name $value"
-		if {[string compare -nocase "DEVICE_ID" $arg] == 0} {
-		    incr device_id
-		}
-	    }
-	}
-    }		
-    puts $file_handle "\n/******************************************************************/\n"
-    close $file_handle
-}
-
-##################################################
-# procedure post_generate
-# This generates the drivers directory for uboot
-# and runs the ltypes script
-##################################################
-
-proc post_generate {lib_handle} {
-    
-    global drvlist
-    
-    # Create U-Boot tree structure
-    set pwd [pwd]
-    set common_dir "uboot/board/xilinx/common"
-    set xilinx_enet_dir "uboot/board/xilinx/xilinx_enet"
-    set ml300_dir  "uboot/board/xilinx/ml300"
-    
-    exec bash -c "mkdir -p $common_dir $xilinx_enet_dir $ml300_dir"
-    
-    # Copy files for xilinx_ocp
-    xcopy_commonfiles
-
-    foreach drv $drvlist {
-	set drvname [xget_value $drv "NAME"]
-	set ver [xget_value $drv "PARAMETER" "DRIVER_VER"]
-	set ver [string map {. _} $ver]
-	set dirname [format "%s_v%s" $drvname $ver]
-	
-	if {[string compare -nocase $drvname "emac"] == 0} {
-	    xcopy_emac $drv $dirname
-	} elseif {[string compare -nocase $drvname "iic"] == 0} {
-	    xcopy_iic $drv $dirname
-	}
-    }
-    
-    # Call Ltypes Script here
-    set uboot "uboot"
-    xltype_file $uboot
-
-    # Move xparameters.h around
-    exec bash -c "cp ../../include/xparameters.h $ml300_dir"
-
-    # copy the whole U-Boot BSP to its final destination
-    set value [xget_value $lib_handle "PARAMETER" TARGET_DIR]
-    puts "TARGET_DIR : $value"
-
-    if {$value != ""} {
-        if {[file isdirectory $value] == 0} {
-            exec bash -c "mkdir -p $value"
-        }
-        exec bash -c "cp -Rp uboot/* $value"
-    }
-}
-
-proc xcopy_commonfiles {} {
-
-    global drvlist
-
-    set common_dir "uboot/board/xilinx/common"
-    
-    foreach drv $drvlist {
-	set depends [xget_value $drv "OPTION" "DEPENDS"]
-	foreach dep $depends {
-	    puts "dep : $dep"
-	    if {[file isdirectory "../$dep"] == 1} {
-		exec bash -c "cp -f ../$dep/src/*.c $common_dir"
-		exec bash -c "cp -f ../$dep/src/*.h $common_dir"
-	    }
-	}
-    }
-    
-}
-
-proc xcopy_emac {drv_handle dirname} {
-    set emac "board/xilinx/xilinx_enet"
-    xcopy_dir $dirname $emac
-}
-
-proc xcopy_iic {drv_handle dirname} {
-    set iic "board/xilinx/xilinx_iic"
-    xcopy_dir $dirname $iic
-}
-
-proc xcopy_dir {srcdir dstdir} {
-    
-    set dstdirname [format "%s%s" "uboot/" $dstdir]
-    if {[file isdirectory "../$srcdir"] == 1} {
-	# Copy files from src to dst
-	exec bash -c "mkdir -p $dstdirname"
-	exec bash -c "cp -f ../$srcdir/src/*.c $dstdirname"
-	exec bash -c "cp -f ../$srcdir/src/*.h $dstdirname"
-    } else {
-	puts "$srcdir does not exist ..."
-    }
-}
-
-
-proc xltype_file {filename} {
-
-    global ltypes
-
-    puts $filename
-
-    if {[file isdirectory $filename]} {
-	foreach entry [glob -nocomplain [file join $filename *]] {
-	    xltype_file $entry
-	}
-    } else {
-	exec bash -c "$ltypes $filename"
-    }
-    
-}
diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds
deleted file mode 100644
index b6d748e1d9..0000000000
--- a/board/xilinx/ml300/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-/*
-    cpu/ppc4xx/start.o	(.text)
-    board/xilinx/ml300/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-*/
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xilinx/ml300/u-boot.lds.debug b/board/xilinx/ml300/u-boot.lds.debug
deleted file mode 100644
index 1608f8cdaa..0000000000
--- a/board/xilinx/ml300/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xilinx/ml300/xparameters.h b/board/xilinx/ml300/xparameters.h
deleted file mode 100644
index 2c56737dc5..0000000000
--- a/board/xilinx/ml300/xparameters.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.2 EDK_Gm.11
-* DO NOT EDIT.
-*
-* Copyright (c) 2003 Xilinx, Inc.  All rights reserved.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-/******************************************************************/
-
-/* U-Boot Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
deleted file mode 100644
index b30e897669..0000000000
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <common.h>
-#include <net.h>
-#include "xparameters.h"
-#include "xemac.h"
-
-#if defined(XPAR_EMAC_0_DEVICE_ID)
-/*
- * ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
- * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
- */
-
-#define ENET_MAX_MTU           PKTSIZE
-#define ENET_MAX_MTU_ALIGNED   PKTSIZE_ALIGN
-#define ENET_ADDR_LENGTH       6
-
-static XEmac Emac;
-static char etherrxbuff[PKTSIZE_ALIGN];	/* Receive buffer */
-
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CFG_ENV_IS_NOWHERE
-static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#endif
-
-static int initialized = 0;
-
-void
-eth_halt(void)
-{
-	if (initialized)
-		(void) XEmac_Stop(&Emac);
-}
-
-int
-eth_init(bd_t * bis)
-{
-	u32 Options;
-	XStatus Result;
-
-#ifdef DEBUG
-	printf("EMAC Initialization Started\n\r");
-#endif
-
-	Result = XEmac_Initialize(&Emac, XPAR_EMAC_0_DEVICE_ID);
-	if (Result != XST_SUCCESS) {
-		return 0;
-	}
-
-	/* make sure the Emac is stopped before it is started */
-	(void) XEmac_Stop(&Emac);
-
-#ifdef CFG_ENV_IS_NOWHERE
-	memcpy(bis->bi_enetaddr, EMACAddr, 6);
-#endif
-
-	Result = XEmac_SetMacAddress(&Emac, bis->bi_enetaddr);
-	if (Result != XST_SUCCESS) {
-		return 0;
-	}
-
-	Options =
-	    (XEM_POLLED_OPTION | XEM_UNICAST_OPTION | XEM_BROADCAST_OPTION |
-	     XEM_FDUPLEX_OPTION | XEM_INSERT_FCS_OPTION |
-	     XEM_INSERT_PAD_OPTION);
-	Result = XEmac_SetOptions(&Emac, Options);
-	if (Result != XST_SUCCESS) {
-		return 0;
-	}
-
-	Result = XEmac_Start(&Emac);
-	if (Result != XST_SUCCESS) {
-		return 0;
-	}
-#ifdef DEBUG
-	printf("EMAC Initialization complete\n\r");
-#endif
-
-	initialized = 1;
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------------+
-+-----------------------------------------------------------------------------*/
-int
-eth_send(volatile void *ptr, int len)
-{
-	XStatus Result;
-
-	if (len > ENET_MAX_MTU)
-		len = ENET_MAX_MTU;
-
-	Result = XEmac_PollSend(&Emac, (u8 *) ptr, len);
-	if (Result == XST_SUCCESS) {
-		return (1);
-	} else {
-		printf("Error while sending frame\n\r");
-		return (0);
-	}
-
-}
-
-int
-eth_rx(void)
-{
-	u32 RecvFrameLength;
-	XStatus Result;
-
-	RecvFrameLength = PKTSIZE;
-	Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength);
-	if (Result == XST_SUCCESS) {
-		NetReceive((uchar *)etherrxbuff, RecvFrameLength);
-		return (1);
-	} else {
-		return (0);
-	}
-}
-
-#endif
diff --git a/board/xilinx/xilinx_enet/xemac.c b/board/xilinx/xilinx_enet/xemac.c
deleted file mode 100644
index 48b4ede704..0000000000
--- a/board/xilinx/xilinx_enet/xemac.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac.c
-*
-* The XEmac driver. Functions in this file are the minimum required functions
-* for this driver. See xemac.h for a detailed description of the driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00b rpm  07/23/02 Removed the PHY reset from Initialize()
-* 1.00b rmm  09/23/02 Removed commented code in Initialize(). Recycled as
-*                     XEmac_mPhyReset macro in xemac_l.h.
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* 1.00c rpm  12/12/02 Changed location of IsStarted assignment in XEmac_Start
-*                     to be sure the flag is set before the device and
-*                     interrupts are enabled.
-* 1.00c rpm  02/03/03 SelfTest was not clearing polled mode. Take driver out
-*                     of polled mode in XEmac_Reset() to fix this problem.
-* 1.00c rmm  05/13/03 Fixed diab compiler warnings relating to asserts.
-* </pre>
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"	/* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-static XStatus ConfigureDma(XEmac * InstancePtr);
-static XStatus ConfigureFifo(XEmac * InstancePtr);
-static void StubFifoHandler(void *CallBackRef);
-static void StubErrorHandler(void *CallBackRef, XStatus ErrorCode);
-static void StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr,
-			  u32 NumBds);
-
-/************************** Variable Definitions *****************************/
-
-/*****************************************************************************/
-/**
-*
-* Initialize a specific XEmac instance/driver.  The initialization entails:
-* - Initialize fields of the XEmac structure
-* - Clear the Ethernet statistics for this device
-* - Initialize the IPIF component with its register base address
-* - Configure the FIFO components with their register base addresses.
-* - If the device is configured with DMA, configure the DMA channel components
-*   with their register base addresses. At some later time, memory pools for
-*   the scatter-gather descriptor lists may be passed to the driver.
-* - Reset the Ethernet MAC
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param DeviceId is the unique id of the device controlled by this XEmac
-*        instance.  Passing in a device id associates the generic XEmac
-*        instance to a specific device, as chosen by the caller or application
-*        developer.
-*
-* @return
-*
-* - XST_SUCCESS if initialization was successful
-* - XST_DEVICE_IS_STARTED if the device has already been started
-* - XST_DEVICE_NOT_FOUND if device configuration information was not found for
-*   a device with the supplied device ID.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId)
-{
-	XStatus Result;
-	XEmac_Config *ConfigPtr;	/* configuration information */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	/*
-	 * If the device is started, disallow the initialize and return a status
-	 * indicating it is started.  This allows the user to stop the device
-	 * and reinitialize, but prevents a user from inadvertently initializing
-	 */
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	/*
-	 * Lookup the device configuration in the temporary CROM table. Use this
-	 * configuration info down below when initializing this component.
-	 */
-	ConfigPtr = XEmac_LookupConfig(DeviceId);
-	if (ConfigPtr == NULL) {
-		return XST_DEVICE_NOT_FOUND;
-	}
-
-	/*
-	 * Set some default values
-	 */
-	InstancePtr->IsReady = 0;
-	InstancePtr->IsStarted = 0;
-	InstancePtr->IpIfDmaConfig = ConfigPtr->IpIfDmaConfig;
-	InstancePtr->HasMii = ConfigPtr->HasMii;
-	InstancePtr->HasMulticastHash = FALSE;
-
-	/* Always default polled to false, let user configure this mode */
-	InstancePtr->IsPolled = FALSE;
-	InstancePtr->FifoRecvHandler = StubFifoHandler;
-	InstancePtr->FifoSendHandler = StubFifoHandler;
-	InstancePtr->ErrorHandler = StubErrorHandler;
-	InstancePtr->SgRecvHandler = StubSgHandler;
-	InstancePtr->SgSendHandler = StubSgHandler;
-
-	/*
-	 * Clear the statistics for this driver
-	 */
-	XEmac_mClearStruct((u8 *) & InstancePtr->Stats, sizeof (XEmac_Stats));
-
-	/*
-	 * Initialize the device register base addresses
-	 */
-	InstancePtr->BaseAddress = ConfigPtr->BaseAddress;
-
-	/*
-	 * Configure the send and receive FIFOs in the MAC
-	 */
-	Result = ConfigureFifo(InstancePtr);
-	if (Result != XST_SUCCESS) {
-		return Result;
-	}
-
-	/*
-	 * If the device is configured for DMA, configure the send and receive DMA
-	 * channels in the MAC.
-	 */
-	if (XEmac_mIsDma(InstancePtr)) {
-		Result = ConfigureDma(InstancePtr);
-		if (Result != XST_SUCCESS) {
-			return Result;
-		}
-	}
-
-	/*
-	 * Indicate the component is now ready to use. Note that this is done before
-	 * we reset the device and the PHY below, which may seem a bit odd. The
-	 * choice was made to move it here rather than remove the asserts in various
-	 * functions (e.g., Reset() and all functions that it calls).  Applications
-	 * that use multiple threads, one to initialize the XEmac driver and one
-	 * waiting on the IsReady condition could have a problem with this sequence.
-	 */
-	InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
-	/*
-	 * Reset the MAC to get it into its initial state. It is expected that
-	 * device configuration by the user will take place after this
-	 * initialization is done, but before the device is started.
-	 */
-	XEmac_Reset(InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Start the Ethernet controller as follows:
-*   - If not in polled mode
-*       - Set the internal interrupt enable registers appropriately
-*       - Enable interrupts within the device itself. Note that connection of
-*         the driver's interrupt handler to the interrupt source (typically
-*         done using the interrupt controller component) is done by the higher
-*         layer software.
-*       - If the device is configured with scatter-gather DMA, start the DMA
-*         channels if the descriptor lists are not empty
-*   - Enable the transmitter
-*   - Enable the receiver
-*
-* The PHY is enabled after driver initialization. We assume the upper layer
-* software has configured it and the EMAC appropriately before this function
-* is called.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS if the device was started successfully
-* - XST_NO_CALLBACK if a callback function has not yet been registered using
-*   the SetxxxHandler function. This is required if in interrupt mode.
-* - XST_DEVICE_IS_STARTED if the device is already started
-* - XST_DMA_SG_NO_LIST if configured for scatter-gather DMA and a descriptor
-*   list has not yet been created for the send or receive channel.
-*
-* @note
-*
-* The driver tries to match the hardware configuration. So if the hardware
-* is configured with scatter-gather DMA, the driver expects to start the
-* scatter-gather channels and expects that the user has set up the buffer
-* descriptor lists already. If the user expects to use the driver in a mode
-* different than how the hardware is configured, the user should modify the
-* configuration table to reflect the mode to be used. Modifying the config
-* table is a workaround for now until we get some experience with how users
-* are intending to use the hardware in its different configurations. For
-* example, if the hardware is built with scatter-gather DMA but the user is
-* intending to use only simple DMA, the user either needs to modify the config
-* table as a workaround or rebuild the hardware with only simple DMA.
-*
-* This function makes use of internal resources that are shared between the
-* Start, Stop, and SetOptions functions. So if one task might be setting device
-* options while another is trying to start the device, the user is required to
-* provide protection of this shared data (typically using a semaphore).
-*
-******************************************************************************/
-XStatus
-XEmac_Start(XEmac * InstancePtr)
-{
-	u32 ControlReg;
-	XStatus Result;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * If it is already started, return a status indicating so
-	 */
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	/*
-	 * If not polled, enable interrupts
-	 */
-	if (!InstancePtr->IsPolled) {
-		/*
-		 * Verify that the callbacks have been registered, then enable
-		 * interrupts
-		 */
-		if (XEmac_mIsSgDma(InstancePtr)) {
-			if ((InstancePtr->SgRecvHandler == StubSgHandler) ||
-			    (InstancePtr->SgSendHandler == StubSgHandler)) {
-				return XST_NO_CALLBACK;
-			}
-
-			/* Enable IPIF interrupts */
-			XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
-					      XEM_IPIF_DMA_DFT_MASK |
-					      XIIF_V123B_ERROR_MASK);
-			XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
-					      XEM_EIR_DFT_SG_MASK);
-
-			/* Enable scatter-gather DMA interrupts */
-			XDmaChannel_SetIntrEnable(&InstancePtr->RecvChannel,
-						  XEM_DMA_SG_INTR_MASK);
-			XDmaChannel_SetIntrEnable(&InstancePtr->SendChannel,
-						  XEM_DMA_SG_INTR_MASK);
-		} else {
-			if ((InstancePtr->FifoRecvHandler == StubFifoHandler) ||
-			    (InstancePtr->FifoSendHandler == StubFifoHandler)) {
-				return XST_NO_CALLBACK;
-			}
-
-			/* Enable IPIF interrupts (used by simple DMA also) */
-			XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
-					      XEM_IPIF_FIFO_DFT_MASK |
-					      XIIF_V123B_ERROR_MASK);
-			XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
-					      XEM_EIR_DFT_FIFO_MASK);
-		}
-
-		/* Enable the global IPIF interrupt output */
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-	}
-
-	/*
-	 * Indicate that the device is started before we enable the transmitter
-	 * or receiver. This needs to be done before because as soon as the
-	 * receiver is enabled we may get an interrupt, and there are functions
-	 * in the interrupt handling path that rely on the IsStarted flag.
-	 */
-	InstancePtr->IsStarted = XCOMPONENT_IS_STARTED;
-
-	/*
-	 * Enable the transmitter, and receiver (do a read/modify/write to preserve
-	 * current settings). There is no critical section here since this register
-	 * is not modified during interrupt context.
-	 */
-	ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-	ControlReg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
-	ControlReg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
-
-	XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
-	/*
-	 * If configured with scatter-gather DMA and not polled, restart the
-	 * DMA channels in case there are buffers ready to be sent or received into.
-	 * The DMA SgStart function uses data that can be modified during interrupt
-	 * context, so a critical section is required here.
-	 */
-	if ((XEmac_mIsSgDma(InstancePtr)) && (!InstancePtr->IsPolled)) {
-		XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
-		/*
-		 * The only error we care about is if the list has not yet been
-		 * created, or on receive, if no buffer descriptors have been
-		 * added yet (the list is empty). Other errors are benign at this point.
-		 */
-		Result = XDmaChannel_SgStart(&InstancePtr->RecvChannel);
-		if ((Result == XST_DMA_SG_NO_LIST)
-		    || (Result == XST_DMA_SG_LIST_EMPTY)) {
-			XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-			return Result;
-		}
-
-		Result = XDmaChannel_SgStart(&InstancePtr->SendChannel);
-		if (Result == XST_DMA_SG_NO_LIST) {
-			XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-			return Result;
-		}
-
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Stop the Ethernet MAC as follows:
-*   - If the device is configured with scatter-gather DMA, stop the DMA
-*     channels (wait for acknowledgment of stop)
-*   - Disable the transmitter and receiver
-*   - Disable interrupts if not in polled mode (the higher layer software is
-*     responsible for disabling interrupts at the interrupt controller)
-*
-* The PHY is left enabled after a Stop is called.
-*
-* If the device is configured for scatter-gather DMA, the DMA engine stops at
-* the next buffer descriptor in its list. The remaining descriptors in the list
-* are not removed, so anything in the list will be transmitted or received when
-* the device is restarted. The side effect of doing this is that the last
-* buffer descriptor processed by the DMA engine before stopping may not be the
-* last descriptor in the Ethernet frame. So when the device is restarted, a
-* partial frame (i.e., a bad frame) may be transmitted/received. This is only a
-* concern if a frame can span multiple buffer descriptors, which is dependent
-* on the size of the network buffers.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS if the device was stopped successfully
-* - XST_DEVICE_IS_STOPPED if the device is already stopped
-*
-* @note
-*
-* This function makes use of internal resources that are shared between the
-* Start, Stop, and SetOptions functions. So if one task might be setting device
-* options while another is trying to start the device, the user is required to
-* provide protection of this shared data (typically using a semaphore).
-*
-******************************************************************************/
-XStatus
-XEmac_Stop(XEmac * InstancePtr)
-{
-	u32 ControlReg;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * If the device is already stopped, do nothing but return a status
-	 * indicating so
-	 */
-	if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STOPPED;
-	}
-
-	/*
-	 * If configured for scatter-gather DMA, stop the DMA channels. Ignore
-	 * the XST_DMA_SG_IS_STOPPED return code. There is a critical section
-	 * here between SgStart and SgStop, and SgStart can be called in interrupt
-	 * context, so disable interrupts while calling SgStop.
-	 */
-	if (XEmac_mIsSgDma(InstancePtr)) {
-		XBufDescriptor *BdTemp;	/* temporary descriptor pointer */
-
-		XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
-		(void) XDmaChannel_SgStop(&InstancePtr->SendChannel, &BdTemp);
-		(void) XDmaChannel_SgStop(&InstancePtr->RecvChannel, &BdTemp);
-
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-	}
-
-	/*
-	 * Disable the transmitter and receiver. There is no critical section
-	 * here since this register is not modified during interrupt context.
-	 */
-	ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-	ControlReg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
-	XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
-	/*
-	 * If not in polled mode, disable interrupts for IPIF (includes MAC and
-	 * DMAs)
-	 */
-	if (!InstancePtr->IsPolled) {
-		XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-	}
-
-	InstancePtr->IsStarted = 0;
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Reset the Ethernet MAC. This is a graceful reset in that the device is stopped
-* first. Resets the DMA channels, the FIFOs, the transmitter, and the receiver.
-* The PHY is not reset. Any frames in the scatter-gather descriptor lists will
-* remain in the lists. The side effect of doing this is that after a reset and
-* following a restart of the device, frames that were in the list before the
-* reset may be transmitted or received. Reset must only be called after the
-* driver has been initialized.
-*
-* The driver is also taken out of polled mode if polled mode was set. The user
-* is responsbile for re-configuring the driver into polled mode after the
-* reset if desired.
-*
-* The configuration after this reset is as follows:
-*   - Half duplex
-*   - Disabled transmitter and receiver
-*   - Enabled PHY (the PHY is not reset)
-*   - MAC transmitter does pad insertion, FCS insertion, and source address
-*     overwrite.
-*   - MAC receiver does not strip padding or FCS
-*   - Interframe Gap as recommended by IEEE Std. 802.3 (96 bit times)
-*   - Unicast addressing enabled
-*   - Broadcast addressing enabled
-*   - Multicast addressing disabled (addresses are preserved)
-*   - Promiscuous addressing disabled
-*   - Default packet threshold and packet wait bound register values for
-*     scatter-gather DMA operation
-*   - MAC address of all zeros
-*   - Non-polled mode
-*
-* The upper layer software is responsible for re-configuring (if necessary)
-* and restarting the MAC after the reset. Note that the PHY is not reset. PHY
-* control is left to the upper layer software. Note also that driver statistics
-* are not cleared on reset. It is up to the upper layer software to clear the
-* statistics if needed.
-*
-* When a reset is required due to an internal error, the driver notifies the
-* upper layer software of this need through the ErrorHandler callback and
-* specific status codes.  The upper layer software is responsible for calling
-* this Reset function and then re-configuring the device.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-* @internal
-*
-* The reset is accomplished by setting the IPIF reset register.  This takes
-* care of resetting all hardware blocks, including the MAC.
-*
-******************************************************************************/
-void
-XEmac_Reset(XEmac * InstancePtr)
-{
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Stop the device first
-	 */
-	(void) XEmac_Stop(InstancePtr);
-
-	/*
-	 * Take the driver out of polled mode
-	 */
-	InstancePtr->IsPolled = FALSE;
-
-	/*
-	 * Reset the entire IPIF at once.  If we choose someday to reset each
-	 * hardware block separately, the reset should occur in the direction of
-	 * data flow. For example, for the send direction the reset order is DMA
-	 * first, then FIFO, then the MAC transmitter.
-	 */
-	XIIF_V123B_RESET(InstancePtr->BaseAddress);
-
-	if (XEmac_mIsSgDma(InstancePtr)) {
-		/*
-		 * After reset, configure the scatter-gather DMA packet threshold and
-		 * packet wait bound registers to default values. Ignore the return
-		 * values of these functions since they only return error if the device
-		 * is not stopped.
-		 */
-		(void) XEmac_SetPktThreshold(InstancePtr, XEM_SEND,
-					     XEM_SGDMA_DFT_THRESHOLD);
-		(void) XEmac_SetPktThreshold(InstancePtr, XEM_RECV,
-					     XEM_SGDMA_DFT_THRESHOLD);
-		(void) XEmac_SetPktWaitBound(InstancePtr, XEM_SEND,
-					     XEM_SGDMA_DFT_WAITBOUND);
-		(void) XEmac_SetPktWaitBound(InstancePtr, XEM_RECV,
-					     XEM_SGDMA_DFT_WAITBOUND);
-	}
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the MAC address for this driver/device.  The address is a 48-bit value.
-* The device must be stopped before calling this function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param AddressPtr is a pointer to a 6-byte MAC address.
-*
-* @return
-*
-* - XST_SUCCESS if the MAC address was set successfully
-* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr)
-{
-	u32 MacAddr = 0;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(AddressPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * The device must be stopped before setting the MAC address
-	 */
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	/*
-	 * Set the device station address high and low registers
-	 */
-	MacAddr = (AddressPtr[0] << 8) | AddressPtr[1];
-	XIo_Out32(InstancePtr->BaseAddress + XEM_SAH_OFFSET, MacAddr);
-
-	MacAddr = (AddressPtr[2] << 24) | (AddressPtr[3] << 16) |
-	    (AddressPtr[4] << 8) | AddressPtr[5];
-
-	XIo_Out32(InstancePtr->BaseAddress + XEM_SAL_OFFSET, MacAddr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the MAC address for this driver/device.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufferPtr is an output parameter, and is a pointer to a buffer into
-*        which the current MAC address will be copied. The buffer must be at
-*        least 6 bytes.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr)
-{
-	u32 MacAddrHi;
-	u32 MacAddrLo;
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(BufferPtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	MacAddrHi = XIo_In32(InstancePtr->BaseAddress + XEM_SAH_OFFSET);
-	MacAddrLo = XIo_In32(InstancePtr->BaseAddress + XEM_SAL_OFFSET);
-
-	BufferPtr[0] = (u8) (MacAddrHi >> 8);
-	BufferPtr[1] = (u8) MacAddrHi;
-	BufferPtr[2] = (u8) (MacAddrLo >> 24);
-	BufferPtr[3] = (u8) (MacAddrLo >> 16);
-	BufferPtr[4] = (u8) (MacAddrLo >> 8);
-	BufferPtr[5] = (u8) MacAddrLo;
-}
-
-/******************************************************************************/
-/**
-*
-* Configure DMA capabilities.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* - XST_SUCCESS  if successful initialization of DMA
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-ConfigureDma(XEmac * InstancePtr)
-{
-	XStatus Result;
-
-	/*
-	 * Initialize the DMA channels with their base addresses. We assume
-	 * scatter-gather DMA is the only possible configuration. Descriptor space
-	 * will need to be set later by the upper layer.
-	 */
-	Result = XDmaChannel_Initialize(&InstancePtr->RecvChannel,
-					InstancePtr->BaseAddress +
-					XEM_DMA_RECV_OFFSET);
-	if (Result != XST_SUCCESS) {
-		return Result;
-	}
-
-	Result = XDmaChannel_Initialize(&InstancePtr->SendChannel,
-					InstancePtr->BaseAddress +
-					XEM_DMA_SEND_OFFSET);
-
-	return Result;
-}
-
-/******************************************************************************/
-/**
-*
-* Configure the send and receive FIFO components with their base addresses
-* and interrupt masks.  Currently the base addresses are defined constants.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* XST_SUCCESS if successful initialization of the packet FIFOs
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-ConfigureFifo(XEmac * InstancePtr)
-{
-	XStatus Result;
-
-	/*
-	 * Return status from the packet FIFOs initialization is ignored since
-	 * they always return success.
-	 */
-	Result = XPacketFifoV100b_Initialize(&InstancePtr->RecvFifo,
-					     InstancePtr->BaseAddress +
-					     XEM_PFIFO_RXREG_OFFSET,
-					     InstancePtr->BaseAddress +
-					     XEM_PFIFO_RXDATA_OFFSET);
-	if (Result != XST_SUCCESS) {
-		return Result;
-	}
-
-	Result = XPacketFifoV100b_Initialize(&InstancePtr->SendFifo,
-					     InstancePtr->BaseAddress +
-					     XEM_PFIFO_TXREG_OFFSET,
-					     InstancePtr->BaseAddress +
-					     XEM_PFIFO_TXDATA_OFFSET);
-	return Result;
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the scatter-gather send and recv callbacks. The stub
-* is here in case the upper layers forget to set the handlers.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-* @param BdPtr is a pointer to the first buffer descriptor in a list
-* @param NumBds is the number of descriptors in the list.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
-{
-	XASSERT_VOID_ALWAYS();
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the non-DMA send and recv callbacks.  The stub is here in
-* case the upper layers forget to set the handlers.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubFifoHandler(void *CallBackRef)
-{
-	XASSERT_VOID_ALWAYS();
-}
-
-/******************************************************************************/
-/**
-*
-* This is a stub for the asynchronous error callback.  The stub is here in
-* case the upper layers forget to set the handler.
-*
-* @param CallBackRef is a pointer to the upper layer callback reference
-* @param ErrorCode is the Xilinx error code, indicating the cause of the error
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-StubErrorHandler(void *CallBackRef, XStatus ErrorCode)
-{
-	XASSERT_VOID_ALWAYS();
-}
-
-/*****************************************************************************/
-/**
-*
-* Lookup the device configuration based on the unique device ID.  The table
-* EmacConfigTable contains the configuration info for each device in the system.
-*
-* @param DeviceId is the unique device ID of the device being looked up.
-*
-* @return
-*
-* A pointer to the configuration table entry corresponding to the given
-* device ID, or NULL if no match is found.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XEmac_Config *
-XEmac_LookupConfig(u16 DeviceId)
-{
-	XEmac_Config *CfgPtr = NULL;
-	int i;
-
-	for (i = 0; i < XPAR_XEMAC_NUM_INSTANCES; i++) {
-		if (XEmac_ConfigTable[i].DeviceId == DeviceId) {
-			CfgPtr = &XEmac_ConfigTable[i];
-			break;
-		}
-	}
-
-	return CfgPtr;
-}
diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h
deleted file mode 100644
index ed704bf29b..0000000000
--- a/board/xilinx/xilinx_enet/xemac.h
+++ /dev/null
@@ -1,673 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac.h
-*
-* The Xilinx Ethernet driver component.	 This component supports the Xilinx
-* Ethernet 10/100 MAC (EMAC).
-*
-* The Xilinx Ethernet 10/100 MAC supports the following features:
-*   - Simple and scatter-gather DMA operations, as well as simple memory
-*     mapped direct I/O interface (FIFOs).
-*   - Media Independent Interface (MII) for connection to external
-*     10/100 Mbps PHY transceivers.
-*   - MII management control reads and writes with MII PHYs
-*   - Independent internal transmit and receive FIFOs
-*   - CSMA/CD compliant operations for half-duplex modes
-*   - Programmable PHY reset signal
-*   - Unicast, broadcast, and promiscuous address filtering (no multicast yet)
-*   - Internal loopback
-*   - Automatic source address insertion or overwrite (programmable)
-*   - Automatic FCS insertion and stripping (programmable)
-*   - Automatic pad insertion and stripping (programmable)
-*   - Pause frame (flow control) detection in full-duplex mode
-*   - Programmable interframe gap
-*   - VLAN frame support.
-*   - Pause frame support
-*
-* The device driver supports all the features listed above.
-*
-* <b>Driver Description</b>
-*
-* The device driver enables higher layer software (e.g., an application) to
-* communicate to the EMAC. The driver handles transmission and reception of
-* Ethernet frames, as well as configuration of the controller. It does not
-* handle protocol stack functionality such as Link Layer Control (LLC) or the
-* Address Resolution Protocol (ARP). The protocol stack that makes use of the
-* driver handles this functionality. This implies that the driver is simply a
-* pass-through mechanism between a protocol stack and the EMAC. A single device
-* driver can support multiple EMACs.
-*
-* The driver is designed for a zero-copy buffer scheme. That is, the driver will
-* not copy buffers. This avoids potential throughput bottlenecks within the
-* driver.
-*
-* Since the driver is a simple pass-through mechanism between a protocol stack
-* and the EMAC, no assembly or disassembly of Ethernet frames is done at the
-* driver-level. This assumes that the protocol stack passes a correctly
-* formatted Ethernet frame to the driver for transmission, and that the driver
-* does not validate the contents of an incoming frame
-*
-* <b>PHY Communication</b>
-*
-* The driver provides rudimentary read and write functions to allow the higher
-* layer software to access the PHY. The EMAC provides MII registers for the
-* driver to access. This management interface can be parameterized away in the
-* FPGA implementation process. If this is the case, the PHY read and write
-* functions of the driver return XST_NO_FEATURE.
-*
-* External loopback is usually supported at the PHY. It is up to the user to
-* turn external loopback on or off at the PHY. The driver simply provides pass-
-* through functions for configuring the PHY. The driver does not read, write,
-* or reset the PHY on its own. All control of the PHY must be done by the user.
-*
-* <b>Asynchronous Callbacks</b>
-*
-* The driver services interrupts and passes Ethernet frames to the higher layer
-* software through asynchronous callback functions. When using the driver
-* directly (i.e., not with the RTOS protocol stack), the higher layer
-* software must register its callback functions during initialization. The
-* driver requires callback functions for received frames, for confirmation of
-* transmitted frames, and for asynchronous errors.
-*
-* <b>Interrupts</b>
-*
-* The driver has no dependencies on the interrupt controller. The driver
-* provides two interrupt handlers.  XEmac_IntrHandlerDma() handles interrupts
-* when the EMAC is configured with scatter-gather DMA.	XEmac_IntrHandlerFifo()
-* handles interrupts when the EMAC is configured for direct FIFO I/O or simple
-* DMA.	Either of these routines can be connected to the system interrupt
-* controller by the user.
-*
-* <b>Interrupt Frequency</b>
-*
-* When the EMAC is configured with scatter-gather DMA, the frequency of
-* interrupts can be controlled with the interrupt coalescing features of the
-* scatter-gather DMA engine. The frequency of interrupts can be adjusted using
-* the driver API functions for setting the packet count threshold and the packet
-* wait bound values.
-*
-* The scatter-gather DMA engine only interrupts when the packet count threshold
-* is reached, instead of interrupting for each packet. A packet is a generic
-* term used by the scatter-gather DMA engine, and is equivalent to an Ethernet
-* frame in our case.
-*
-* The packet wait bound is a timer value used during interrupt coalescing to
-* trigger an interrupt when not enough packets have been received to reach the
-* packet count threshold.
-*
-* These values can be tuned by the user to meet their needs. If there appear to
-* be interrupt latency problems or delays in packet arrival that are longer than
-* might be expected, the user should verify that the packet count threshold is
-* set low enough to receive interrupts before the wait bound timer goes off.
-*
-* <b>Device Reset</b>
-*
-* Some errors that can occur in the device require a device reset. These errors
-* are listed in the XEmac_SetErrorHandler() function header. The user's error
-* handler is responsible for resetting the device and re-configuring it based on
-* its needs (the driver does not save the current configuration). When
-* integrating into an RTOS, these reset and re-configure obligations are
-* taken care of by the Xilinx adapter software if it exists for that RTOS.
-*
-* <b>Device Configuration</b>
-*
-* The device can be configured in various ways during the FPGA implementation
-* process.  Configuration parameters are stored in the xemac_g.c files.
-* A table is defined where each entry contains configuration information
-* for an EMAC device.  This information includes such things as the base address
-* of the memory-mapped device, the base addresses of IPIF, DMA, and FIFO modules
-* within the device, and whether the device has DMA, counter registers,
-* multicast support, MII support, and flow control.
-*
-* The driver tries to use the features built into the device. So if, for
-* example, the hardware is configured with scatter-gather DMA, the driver
-* expects to start the scatter-gather channels and expects that the user has set
-* up the buffer descriptor lists already. If the user expects to use the driver
-* in a mode different than how the hardware is configured, the user should
-* modify the configuration table to reflect the mode to be used. Modifying the
-* configuration table is a workaround for now until we get some experience with
-* how users are intending to use the hardware in its different configurations.
-* For example, if the hardware is built with scatter-gather DMA but the user is
-* intending to use only simple DMA, the user either needs to modify the config
-* table as a workaround or rebuild the hardware with only simple DMA. The
-* recommendation at this point is to build the hardware with the features you
-* intend to use. If you're inclined to modify the table, do so before the call
-* to XEmac_Initialize().  Here is a snippet of code that changes a device to
-* simple DMA (the hardware needs to have DMA for this to work of course):
-* <pre>
-*	 XEmac_Config *ConfigPtr;
-*
-*	 ConfigPtr = XEmac_LookupConfig(DeviceId);
-*	 ConfigPtr->IpIfDmaConfig = XEM_CFG_SIMPLE_DMA;
-* </pre>
-*
-* <b>Simple DMA</b>
-*
-* Simple DMA is supported through the FIFO functions, FifoSend and FifoRecv, of
-* the driver (i.e., there is no separate interface for it). The driver makes use
-* of the DMA engine for a simple DMA transfer if the device is configured with
-* DMA, otherwise it uses the FIFOs directly. While the simple DMA interface is
-* therefore transparent to the user, the caching of network buffers is not.
-* If the device is configured with DMA and the FIFO interface is used, the user
-* must ensure that the network buffers are not cached or are cache coherent,
-* since DMA will be used to transfer to and from the Emac device. If the device
-* is configured with DMA and the user really wants to use the FIFOs directly,
-* the user should rebuild the hardware without DMA. If unable to do this, there
-* is a workaround (described above in Device Configuration) to modify the
-* configuration table of the driver to fake the driver into thinking the device
-* has no DMA. A code snippet follows:
-* <pre>
-*	 XEmac_Config *ConfigPtr;
-*
-*	 ConfigPtr = XEmac_LookupConfig(DeviceId);
-*	 ConfigPtr->IpIfDmaConfig = XEM_CFG_NO_DMA;
-* </pre>
-*
-* <b>Asserts</b>
-*
-* Asserts are used within all Xilinx drivers to enforce constraints on argument
-* values. Asserts can be turned off on a system-wide basis by defining, at
-* compile time, the NDEBUG identifier. By default, asserts are turned on and it
-* is recommended that users leave asserts on during development.
-*
-* <b>Building the driver</b>
-*
-* The XEmac driver is composed of several source files. Why so many?  This
-* allows the user to build and link only those parts of the driver that are
-* necessary. Since the EMAC hardware can be configured in various ways (e.g.,
-* with or without DMA), the driver too can be built with varying features.
-* For the most part, this means that besides always linking in xemac.c, you
-* link in only the driver functionality you want. Some of the choices you have
-* are polled vs. interrupt, interrupt with FIFOs only vs. interrupt with DMA,
-* self-test diagnostics, and driver statistics. Note that currently the DMA code
-* must be linked in, even if you don't have DMA in the device.
-*
-* @note
-*
-* Xilinx drivers are typically composed of two components, one is the driver
-* and the other is the adapter.	 The driver is independent of OS and processor
-* and is intended to be highly portable.  The adapter is OS-specific and
-* facilitates communication between the driver and an OS.
-* <br><br>
-* This driver is intended to be RTOS and processor independent.	 It works
-* with physical addresses only.	 Any needs for dynamic memory management,
-* threads or thread mutual exclusion, virtual memory, or cache control must
-* be satisfied by the layer above this driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00b rpm  10/08/02 Replaced HasSgDma boolean with IpifDmaConfig enumerated
-*		      configuration parameter
-* 1.00c rpm  12/05/02 New version includes support for simple DMA and the delay
-*		      argument to SgSend
-* 1.00c rpm  02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
-*		      from SetPktThreshold in the internal DMA driver. Also
-*		      avoided compiler warnings by initializing Result in the
-*		      DMA interrupt service routines.
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_H			/* prevent circular inclusions */
-#define XEMAC_H			/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xparameters.h"
-#include "xpacket_fifo_v1_00_b.h"	/* Uses v1.00b of Packet Fifo */
-#include "xdma_channel.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * Device information
- */
-#define XEM_DEVICE_NAME	    "xemac"
-#define XEM_DEVICE_DESC	    "Xilinx Ethernet 10/100 MAC"
-
-/** @name Configuration options
- *
- * Device configuration options (see the XEmac_SetOptions() and
- * XEmac_GetOptions() for information on how to use these options)
- * @{
- */
-/**
- * <pre>
- *   XEM_BROADCAST_OPTION	 Broadcast addressing on or off (default is on)
- *   XEM_UNICAST_OPTION		 Unicast addressing on or off (default is on)
- *   XEM_PROMISC_OPTION		 Promiscuous addressing on or off (default is off)
- *   XEM_FDUPLEX_OPTION		 Full duplex on or off (default is off)
- *   XEM_POLLED_OPTION		 Polled mode on or off (default is off)
- *   XEM_LOOPBACK_OPTION	 Internal loopback on or off (default is off)
- *   XEM_FLOW_CONTROL_OPTION	 Interpret pause frames in full duplex mode
- *				 (default is off)
- *   XEM_INSERT_PAD_OPTION	 Pad short frames on transmit (default is on)
- *   XEM_INSERT_FCS_OPTION	 Insert FCS (CRC) on transmit (default is on)
- *   XEM_INSERT_ADDR_OPTION	 Insert source address on transmit (default is on)
- *   XEM_OVWRT_ADDR_OPTION	 Overwrite source address on transmit. This is
- *				 only used if source address insertion is on.
- *				 (default is on)
- *   XEM_STRIP_PAD_FCS_OPTION	 Strip FCS and padding from received frames
- *				 (default is off)
-  * </pre>
- */
-#define XEM_UNICAST_OPTION	  0x00000001UL
-#define XEM_BROADCAST_OPTION	  0x00000002UL
-#define XEM_PROMISC_OPTION	  0x00000004UL
-#define XEM_FDUPLEX_OPTION	  0x00000008UL
-#define XEM_POLLED_OPTION	  0x00000010UL
-#define XEM_LOOPBACK_OPTION	  0x00000020UL
-#define XEM_FLOW_CONTROL_OPTION	  0x00000080UL
-#define XEM_INSERT_PAD_OPTION	  0x00000100UL
-#define XEM_INSERT_FCS_OPTION	  0x00000200UL
-#define XEM_INSERT_ADDR_OPTION	  0x00000400UL
-#define XEM_OVWRT_ADDR_OPTION	  0x00000800UL
-#define XEM_STRIP_PAD_FCS_OPTION  0x00002000UL
-/*@}*/
-/*
- * Not supported yet:
- *   XEM_MULTICAST_OPTION	 Multicast addressing on or off (default is off)
- */
-/* NOT SUPPORTED YET... */
-#define XEM_MULTICAST_OPTION	  0x00000040UL
-
-/*
- * Some default values for interrupt coalescing within the scatter-gather
- * DMA engine.
- */
-#define XEM_SGDMA_DFT_THRESHOLD	    1	/* Default pkt threshold */
-#define XEM_SGDMA_MAX_THRESHOLD	    255 /* Maximum pkt theshold */
-#define XEM_SGDMA_DFT_WAITBOUND	    5	/* Default pkt wait bound (msec) */
-#define XEM_SGDMA_MAX_WAITBOUND	    1023	/* Maximum pkt wait bound (msec) */
-
-/*
- * Direction identifiers. These are used for setting values like packet
- * thresholds and wait bound for specific channels
- */
-#define XEM_SEND    1
-#define XEM_RECV    2
-
-/*
- * Arguments to SgSend function to indicate whether to hold off starting
- * the scatter-gather engine.
- */
-#define XEM_SGDMA_NODELAY     0 /* start SG DMA immediately */
-#define XEM_SGDMA_DELAY	      1 /* do not start SG DMA */
-
-/*
- * Constants to determine the configuration of the hardware device. They are
- * used to allow the driver to verify it can operate with the hardware.
- */
-#define XEM_CFG_NO_IPIF		    0	/* Not supported by the driver */
-#define XEM_CFG_NO_DMA		    1	/* No DMA */
-#define XEM_CFG_SIMPLE_DMA	    2	/* Simple DMA */
-#define XEM_CFG_DMA_SG		    3	/* DMA scatter gather */
-
-/*
- * The next few constants help upper layers determine the size of memory
- * pools used for Ethernet buffers and descriptor lists.
- */
-#define XEM_MAC_ADDR_SIZE   6	/* six-byte MAC address */
-#define XEM_MTU		    1500	/* max size of Ethernet frame */
-#define XEM_HDR_SIZE	    14	/* size of Ethernet header */
-#define XEM_HDR_VLAN_SIZE   18	/* size of Ethernet header with VLAN */
-#define XEM_TRL_SIZE	    4	/* size of Ethernet trailer (FCS) */
-#define XEM_MAX_FRAME_SIZE  (XEM_MTU + XEM_HDR_SIZE + XEM_TRL_SIZE)
-#define XEM_MAX_VLAN_FRAME_SIZE	 (XEM_MTU + XEM_HDR_VLAN_SIZE + XEM_TRL_SIZE)
-
-/*
- * Define a default number of send and receive buffers
- */
-#define XEM_MIN_RECV_BUFS   32	/* minimum # of recv buffers */
-#define XEM_DFT_RECV_BUFS   64	/* default # of recv buffers */
-
-#define XEM_MIN_SEND_BUFS   16	/* minimum # of send buffers */
-#define XEM_DFT_SEND_BUFS   32	/* default # of send buffers */
-
-#define XEM_MIN_BUFFERS	    (XEM_MIN_RECV_BUFS + XEM_MIN_SEND_BUFS)
-#define XEM_DFT_BUFFERS	    (XEM_DFT_RECV_BUFS + XEM_DFT_SEND_BUFS)
-
-/*
- * Define the number of send and receive buffer descriptors, used for
- * scatter-gather DMA
- */
-#define XEM_MIN_RECV_DESC   16	/* minimum # of recv descriptors */
-#define XEM_DFT_RECV_DESC   32	/* default # of recv descriptors */
-
-#define XEM_MIN_SEND_DESC   8	/* minimum # of send descriptors */
-#define XEM_DFT_SEND_DESC   16	/* default # of send descriptors */
-
-/**************************** Type Definitions *******************************/
-
-/**
- * Ethernet statistics (see XEmac_GetStats() and XEmac_ClearStats())
- */
-typedef struct {
-	u32 XmitFrames;		 /**< Number of frames transmitted */
-	u32 XmitBytes;		 /**< Number of bytes transmitted */
-	u32 XmitLateCollisionErrors;
-				 /**< Number of transmission failures
-					  due to late collisions */
-	u32 XmitExcessDeferral;	 /**< Number of transmission failures
-					  due o excess collision deferrals */
-	u32 XmitOverrunErrors;	 /**< Number of transmit overrun errors */
-	u32 XmitUnderrunErrors;	 /**< Number of transmit underrun errors */
-	u32 RecvFrames;		 /**< Number of frames received */
-	u32 RecvBytes;		 /**< Number of bytes received */
-	u32 RecvFcsErrors;	 /**< Number of frames discarded due
-					  to FCS errors */
-	u32 RecvAlignmentErrors; /**< Number of frames received with
-					  alignment errors */
-	u32 RecvOverrunErrors;	 /**< Number of frames discarded due
-					  to overrun errors */
-	u32 RecvUnderrunErrors;	 /**< Number of recv underrun errors */
-	u32 RecvMissedFrameErrors;
-				 /**< Number of frames missed by MAC */
-	u32 RecvCollisionErrors; /**< Number of frames discarded due
-					  to collisions */
-	u32 RecvLengthFieldErrors;
-				 /**< Number of frames discarded with
-					  invalid length field */
-	u32 RecvShortErrors;	 /**< Number of short frames discarded */
-	u32 RecvLongErrors;	 /**< Number of long frames discarded */
-	u32 DmaErrors;		 /**< Number of DMA errors since init */
-	u32 FifoErrors;		 /**< Number of FIFO errors since init */
-	u32 RecvInterrupts;	 /**< Number of receive interrupts */
-	u32 XmitInterrupts;	 /**< Number of transmit interrupts */
-	u32 EmacInterrupts;	 /**< Number of MAC (device) interrupts */
-	u32 TotalIntrs;		 /**< Total interrupts */
-} XEmac_Stats;
-
-/**
- * This typedef contains configuration information for a device.
- */
-typedef struct {
-	u16 DeviceId;	    /**< Unique ID  of device */
-	u32 BaseAddress;    /**< Register base address */
-	u32 HasCounters;   /**< Does device have counters? */
-	u8 IpIfDmaConfig;   /**< IPIF/DMA hardware configuration */
-	u32 HasMii;	   /**< Does device support MII? */
-
-} XEmac_Config;
-
-/** @name Typedefs for callbacks
- * Callback functions.
- * @{
- */
-/**
- * Callback when data is sent or received with scatter-gather DMA.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- *	  when setting the callback functions, and passed back to the upper
- *	  layer when the callback is invoked.
- * @param BdPtr is a pointer to the first buffer descriptor in a list of
- *	  buffer descriptors.
- * @param NumBds is the number of buffer descriptors in the list pointed
- *	  to by BdPtr.
- */
-typedef void (*XEmac_SgHandler) (void *CallBackRef, XBufDescriptor * BdPtr,
-				 u32 NumBds);
-
-/**
- * Callback when data is sent or received with direct FIFO communication or
- * simple DMA. The user typically defines two callacks, one for send and one
- * for receive.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- *	  when setting the callback functions, and passed back to the upper
- *	  layer when the callback is invoked.
- */
-typedef void (*XEmac_FifoHandler) (void *CallBackRef);
-
-/**
- * Callback when an asynchronous error occurs.
- *
- * @param CallBackRef is a callback reference passed in by the upper layer
- *	  when setting the callback functions, and passed back to the upper
- *	  layer when the callback is invoked.
- * @param ErrorCode is a Xilinx error code defined in xstatus.h.  Also see
- *	  XEmac_SetErrorHandler() for a description of possible errors.
- */
-typedef void (*XEmac_ErrorHandler) (void *CallBackRef, XStatus ErrorCode);
-/*@}*/
-
-/**
- * The XEmac driver instance data. The user is required to allocate a
- * variable of this type for every EMAC device in the system. A pointer
- * to a variable of this type is then passed to the driver API functions.
- */
-typedef struct {
-	u32 BaseAddress;	/* Base address (of IPIF) */
-	u32 IsStarted;		/* Device is currently started */
-	u32 IsReady;		/* Device is initialized and ready */
-	u32 IsPolled;		/* Device is in polled mode */
-	u8 IpIfDmaConfig;	/* IPIF/DMA hardware configuration */
-	u32 HasMii;		/* Does device support MII? */
-	u32 HasMulticastHash;	/* Does device support multicast hash table? */
-
-	XEmac_Stats Stats;
-	XPacketFifoV100b RecvFifo;	/* FIFO used to receive frames */
-	XPacketFifoV100b SendFifo;	/* FIFO used to send frames */
-
-	/*
-	 * Callbacks
-	 */
-	XEmac_FifoHandler FifoRecvHandler;	/* for non-DMA/simple DMA interrupts */
-	void *FifoRecvRef;
-	XEmac_FifoHandler FifoSendHandler;	/* for non-DMA/simple DMA interrupts */
-	void *FifoSendRef;
-	XEmac_ErrorHandler ErrorHandler;	/* for asynchronous errors */
-	void *ErrorRef;
-
-	XDmaChannel RecvChannel;	/* DMA receive channel driver */
-	XDmaChannel SendChannel;	/* DMA send channel driver */
-
-	XEmac_SgHandler SgRecvHandler;	/* callback for scatter-gather DMA */
-	void *SgRecvRef;
-	XEmac_SgHandler SgSendHandler;	/* callback for scatter-gather DMA */
-	void *SgSendRef;
-} XEmac;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured for
-* scatter-gather DMA.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured for scatter-gather DMA, or FALSE
-* if it is not.
-*
-* @note
-*
-* Signature: u32 XEmac_mIsSgDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsSgDma(InstancePtr) \
-	    ((InstancePtr)->IpIfDmaConfig == XEM_CFG_DMA_SG)
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured for simple DMA.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured for simple DMA, or FALSE otherwise
-*
-* @note
-*
-* Signature: u32 XEmac_mIsSimpleDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsSimpleDma(InstancePtr) \
-	    ((InstancePtr)->IpIfDmaConfig == XEM_CFG_SIMPLE_DMA)
-
-/*****************************************************************************/
-/**
-*
-* This macro determines if the device is currently configured with DMA (either
-* simple DMA or scatter-gather DMA)
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Boolean TRUE if the device is configured with DMA, or FALSE otherwise
-*
-* @note
-*
-* Signature: u32 XEmac_mIsDma(XEmac *InstancePtr)
-*
-******************************************************************************/
-#define XEmac_mIsDma(InstancePtr) \
-	    (XEmac_mIsSimpleDma(InstancePtr) || XEmac_mIsSgDma(InstancePtr))
-
-/************************** Function Prototypes ******************************/
-
-/*
- * Initialization functions in xemac.c
- */
-XStatus XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId);
-XStatus XEmac_Start(XEmac * InstancePtr);
-XStatus XEmac_Stop(XEmac * InstancePtr);
-void XEmac_Reset(XEmac * InstancePtr);
-XEmac_Config *XEmac_LookupConfig(u16 DeviceId);
-
-/*
- * Diagnostic functions in xemac_selftest.c
- */
-XStatus XEmac_SelfTest(XEmac * InstancePtr);
-
-/*
- * Polled functions in xemac_polled.c
- */
-XStatus XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
-XStatus XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
-
-/*
- * Interrupts with scatter-gather DMA functions in xemac_intr_dma.c
- */
-XStatus XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay);
-XStatus XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr);
-XStatus XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold);
-XStatus XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction,
-			      u8 * ThreshPtr);
-XStatus XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction,
-			      u32 TimerValue);
-XStatus XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction,
-			      u32 * WaitPtr);
-XStatus XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr,
-			     u32 ByteCount);
-XStatus XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr,
-			     u32 ByteCount);
-void XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
-			    XEmac_SgHandler FuncPtr);
-void XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
-			    XEmac_SgHandler FuncPtr);
-
-void XEmac_IntrHandlerDma(void *InstancePtr);	/* interrupt handler */
-
-/*
- * Interrupts with direct FIFO functions in xemac_intr_fifo.c. Also used
- * for simple DMA.
- */
-XStatus XEmac_FifoSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
-XStatus XEmac_FifoRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
-void XEmac_SetFifoRecvHandler(XEmac * InstancePtr, void *CallBackRef,
-			      XEmac_FifoHandler FuncPtr);
-void XEmac_SetFifoSendHandler(XEmac * InstancePtr, void *CallBackRef,
-			      XEmac_FifoHandler FuncPtr);
-
-void XEmac_IntrHandlerFifo(void *InstancePtr);	/* interrupt handler */
-
-/*
- * General interrupt-related functions in xemac_intr.c
- */
-void XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
-			   XEmac_ErrorHandler FuncPtr);
-
-/*
- * MAC configuration in xemac_options.c
- */
-XStatus XEmac_SetOptions(XEmac * InstancePtr, u32 OptionFlag);
-u32 XEmac_GetOptions(XEmac * InstancePtr);
-XStatus XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr);
-void XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr);
-XStatus XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2);
-void XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr);
-
-/*
- * Multicast functions in xemac_multicast.c (not supported by EMAC yet)
- */
-XStatus XEmac_MulticastAdd(XEmac * InstancePtr, u8 * AddressPtr);
-XStatus XEmac_MulticastClear(XEmac * InstancePtr);
-
-/*
- * PHY configuration in xemac_phy.c
- */
-XStatus XEmac_PhyRead(XEmac * InstancePtr, u32 PhyAddress,
-		      u32 RegisterNum, u16 * PhyDataPtr);
-XStatus XEmac_PhyWrite(XEmac * InstancePtr, u32 PhyAddress,
-		       u32 RegisterNum, u16 PhyData);
-
-/*
- * Statistics in xemac_stats.c
- */
-void XEmac_GetStats(XEmac * InstancePtr, XEmac_Stats * StatsPtr);
-void XEmac_ClearStats(XEmac * InstancePtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c
deleted file mode 100644
index 9340f911f8..0000000000
--- a/board/xilinx/xilinx_enet/xemac_g.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.1.2 EDK_G.14
-* DO NOT EDIT.
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Description: Driver configuration
-*
-*******************************************************************/
-
-#include "xparameters.h"
-#include "xemac.h"
-
-/*
-* The configuration table for devices
-*/
-
-XEmac_Config XEmac_ConfigTable[] = {
-	{
-	 XPAR_OPB_ETHERNET_0_DEVICE_ID,
-	 XPAR_OPB_ETHERNET_0_BASEADDR,
-	 XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST,
-	 XPAR_OPB_ETHERNET_0_DMA_PRESENT,
-	 XPAR_OPB_ETHERNET_0_MII_EXIST}
-};
diff --git a/board/xilinx/xilinx_enet/xemac_i.h b/board/xilinx/xilinx_enet/xemac_i.h
deleted file mode 100644
index 9c160f3880..0000000000
--- a/board/xilinx/xilinx_enet/xemac_i.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_i.h
-*
-* This header file contains internal identifiers, which are those shared
-* between XEmac components.  The identifiers in this file are not intended for
-* use external to the driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00b rpm  04/29/02 Moved register definitions to xemac_l.h
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_I_H		/* prevent circular inclusions */
-#define XEMAC_I_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xemac.h"
-#include "xemac_l.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * Default buffer descriptor control word masks. The default send BD control
- * is set for incrementing the source address by one for each byte transferred,
- * and specify that the destination address (FIFO) is local to the device. The
- * default receive BD control is set for incrementing the destination address
- * by one for each byte transferred, and specify that the source address is
- * local to the device.
- */
-#define XEM_DFT_SEND_BD_MASK	(XDC_DMACR_SOURCE_INCR_MASK | \
-				 XDC_DMACR_DEST_LOCAL_MASK)
-#define XEM_DFT_RECV_BD_MASK	(XDC_DMACR_DEST_INCR_MASK |  \
-				 XDC_DMACR_SOURCE_LOCAL_MASK)
-
-/*
- * Masks for the IPIF Device Interrupt enable and status registers.
- */
-#define XEM_IPIF_EMAC_MASK	0x00000004UL	/* MAC interrupt */
-#define XEM_IPIF_SEND_DMA_MASK	0x00000008UL	/* Send DMA interrupt */
-#define XEM_IPIF_RECV_DMA_MASK	0x00000010UL	/* Receive DMA interrupt */
-#define XEM_IPIF_RECV_FIFO_MASK 0x00000020UL	/* Receive FIFO interrupt */
-#define XEM_IPIF_SEND_FIFO_MASK 0x00000040UL	/* Send FIFO interrupt */
-
-/*
- * Default IPIF Device Interrupt mask when configured for DMA
- */
-#define XEM_IPIF_DMA_DFT_MASK	(XEM_IPIF_SEND_DMA_MASK |   \
-				 XEM_IPIF_RECV_DMA_MASK |   \
-				 XEM_IPIF_EMAC_MASK |	    \
-				 XEM_IPIF_SEND_FIFO_MASK |  \
-				 XEM_IPIF_RECV_FIFO_MASK)
-
-/*
- * Default IPIF Device Interrupt mask when configured without DMA
- */
-#define XEM_IPIF_FIFO_DFT_MASK	(XEM_IPIF_EMAC_MASK |	    \
-				 XEM_IPIF_SEND_FIFO_MASK |  \
-				 XEM_IPIF_RECV_FIFO_MASK)
-
-#define XEM_IPIF_DMA_DEV_INTR_COUNT   7 /* Number of interrupt sources */
-#define XEM_IPIF_FIFO_DEV_INTR_COUNT  5 /* Number of interrupt sources */
-#define XEM_IPIF_DEVICE_INTR_COUNT  7	/* Number of interrupt sources */
-#define XEM_IPIF_IP_INTR_COUNT	    22	/* Number of MAC interrupts */
-
-/* a mask for all transmit interrupts, used in polled mode */
-#define XEM_EIR_XMIT_ALL_MASK	(XEM_EIR_XMIT_DONE_MASK |	    \
-				 XEM_EIR_XMIT_ERROR_MASK |	    \
-				 XEM_EIR_XMIT_SFIFO_EMPTY_MASK |    \
-				 XEM_EIR_XMIT_LFIFO_FULL_MASK)
-
-/* a mask for all receive interrupts, used in polled mode */
-#define XEM_EIR_RECV_ALL_MASK	(XEM_EIR_RECV_DONE_MASK |	    \
-				 XEM_EIR_RECV_ERROR_MASK |	    \
-				 XEM_EIR_RECV_LFIFO_EMPTY_MASK |    \
-				 XEM_EIR_RECV_LFIFO_OVER_MASK |	    \
-				 XEM_EIR_RECV_LFIFO_UNDER_MASK |    \
-				 XEM_EIR_RECV_DFIFO_OVER_MASK |	    \
-				 XEM_EIR_RECV_MISSED_FRAME_MASK |   \
-				 XEM_EIR_RECV_COLLISION_MASK |	    \
-				 XEM_EIR_RECV_FCS_ERROR_MASK |	    \
-				 XEM_EIR_RECV_LEN_ERROR_MASK |	    \
-				 XEM_EIR_RECV_SHORT_ERROR_MASK |    \
-				 XEM_EIR_RECV_LONG_ERROR_MASK |	    \
-				 XEM_EIR_RECV_ALIGN_ERROR_MASK)
-
-/* a default interrupt mask for scatter-gather DMA operation */
-#define XEM_EIR_DFT_SG_MASK    (XEM_EIR_RECV_ERROR_MASK |	    \
-				XEM_EIR_RECV_LFIFO_OVER_MASK |	    \
-				XEM_EIR_RECV_LFIFO_UNDER_MASK |	    \
-				XEM_EIR_XMIT_SFIFO_OVER_MASK |	    \
-				XEM_EIR_XMIT_SFIFO_UNDER_MASK |	    \
-				XEM_EIR_XMIT_LFIFO_OVER_MASK |	    \
-				XEM_EIR_XMIT_LFIFO_UNDER_MASK |	    \
-				XEM_EIR_RECV_DFIFO_OVER_MASK |	    \
-				XEM_EIR_RECV_MISSED_FRAME_MASK |    \
-				XEM_EIR_RECV_COLLISION_MASK |	    \
-				XEM_EIR_RECV_FCS_ERROR_MASK |	    \
-				XEM_EIR_RECV_LEN_ERROR_MASK |	    \
-				XEM_EIR_RECV_SHORT_ERROR_MASK |	    \
-				XEM_EIR_RECV_LONG_ERROR_MASK |	    \
-				XEM_EIR_RECV_ALIGN_ERROR_MASK)
-
-/* a default interrupt mask for non-DMA operation (direct FIFOs) */
-#define XEM_EIR_DFT_FIFO_MASK  (XEM_EIR_XMIT_DONE_MASK |	    \
-				XEM_EIR_RECV_DONE_MASK |	    \
-				XEM_EIR_DFT_SG_MASK)
-
-/*
- * Mask for the DMA interrupt enable and status registers when configured
- * for scatter-gather DMA.
- */
-#define XEM_DMA_SG_INTR_MASK	(XDC_IXR_DMA_ERROR_MASK	 |	\
-				 XDC_IXR_PKT_THRESHOLD_MASK |	\
-				 XDC_IXR_PKT_WAIT_BOUND_MASK |	\
-				 XDC_IXR_SG_END_MASK)
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Clears a structure of given size, in bytes, by setting each byte to 0.
-*
-* @param StructPtr is a pointer to the structure to be cleared.
-* @param NumBytes is the number of bytes in the structure.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XEmac_mClearStruct(u8 *StructPtr, unsigned int NumBytes)
-*
-******************************************************************************/
-#define XEmac_mClearStruct(StructPtr, NumBytes)	    \
-{						    \
-    int i;					    \
-    u8 *BytePtr = (u8 *)(StructPtr);	    \
-    for (i=0; i < (unsigned int)(NumBytes); i++)    \
-    {						    \
-	*BytePtr++ = 0;				    \
-    }						    \
-}
-
-/************************** Variable Definitions *****************************/
-
-extern XEmac_Config XEmac_ConfigTable[];
-
-/************************** Function Prototypes ******************************/
-
-void XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus);
-void XEmac_CheckFifoRecvError(XEmac * InstancePtr);
-void XEmac_CheckFifoSendError(XEmac * InstancePtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_intr.c b/board/xilinx/xilinx_enet/xemac_intr.c
deleted file mode 100644
index b9a2621564..0000000000
--- a/board/xilinx/xilinx_enet/xemac_intr.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_intr.c
-*
-* This file contains general interrupt-related functions of the XEmac driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* 1.00c rpm  03/31/03 Added comment to indicate that no Receive Length FIFO
-*                     overrun interrupts occur in v1.00l and later of the EMAC
-*                     device. This avoids the need to reset the device on
-*                     receive overruns.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"	/* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling asynchronous errors.  The upper layer
-* software should call this function during initialization.
-*
-* The error callback is invoked by the driver within interrupt context, so it
-* needs to do its job quickly. If there are potentially slow operations within
-* the callback, these should be done at task-level.
-*
-* The Xilinx errors that must be handled by the callback are:
-* - XST_DMA_ERROR indicates an unrecoverable DMA error occurred. This is
-*   typically a bus error or bus timeout. The handler must reset and
-*   re-configure the device.
-* - XST_FIFO_ERROR indicates an unrecoverable FIFO error occurred. This is a
-*   deadlock condition in the packet FIFO. The handler must reset and
-*   re-configure the device.
-* - XST_RESET_ERROR indicates an unrecoverable MAC error occurred, usually an
-*   overrun or underrun. The handler must reset and re-configure the device.
-* - XST_DMA_SG_NO_LIST indicates an attempt was made to access a scatter-gather
-*   DMA list that has not yet been created.
-* - XST_DMA_SG_LIST_EMPTY indicates the driver tried to get a descriptor from
-*   the receive descriptor list, but the list was empty.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-*        the callback. This helps the adapter correlate the callback to a
-*        particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
-		      XEmac_ErrorHandler FuncPtr)
-{
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(FuncPtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	InstancePtr->ErrorHandler = FuncPtr;
-	InstancePtr->ErrorRef = CallBackRef;
-}
-
-/****************************************************************************/
-/*
-*
-* Check the interrupt status bits of the Ethernet MAC for errors. Errors
-* currently handled are:
-* - Receive length FIFO overrun. Indicates data was lost due to the receive
-*   length FIFO becoming full during the reception of a packet. Only a device
-*   reset clears this condition.
-* - Receive length FIFO underrun. An attempt to read an empty FIFO. Only a
-*   device reset clears this condition.
-* - Transmit status FIFO overrun. Indicates data was lost due to the transmit
-*   status FIFO becoming full following the transmission of a packet. Only a
-*   device reset clears this condition.
-* - Transmit status FIFO underrun. An attempt to read an empty FIFO. Only a
-*   device reset clears this condition.
-* - Transmit length FIFO overrun. Indicates data was lost due to the transmit
-*   length FIFO becoming full following the transmission of a packet. Only a
-*   device reset clears this condition.
-* - Transmit length FIFO underrun. An attempt to read an empty FIFO. Only a
-*   device reset clears this condition.
-* - Receive data FIFO overrun. Indicates data was lost due to the receive data
-*   FIFO becoming full during the reception of a packet.
-* - Receive data errors:
-*   - Receive missed frame error. Valid data was lost by the MAC.
-*   - Receive collision error. Data was lost by the MAC due to a collision.
-*   - Receive FCS error.  Data was dicarded by the MAC due to FCS error.
-*   - Receive length field error. Data was dicarded by the MAC due to an invalid
-*     length field in the packet.
-*   - Receive short error. Data was dicarded by the MAC because a packet was
-*     shorter than allowed.
-*   - Receive long error. Data was dicarded by the MAC because a packet was
-*     longer than allowed.
-*   - Receive alignment error. Data was truncated by the MAC because its length
-*     was not byte-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param IntrStatus is the contents of the interrupt status register to be checked
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus)
-{
-	u32 ResetError = FALSE;
-
-	/*
-	 * First check for receive fifo overrun/underrun errors. Most require a
-	 * reset by the user to clear, but the data FIFO overrun error does not.
-	 */
-	if (IntrStatus & XEM_EIR_RECV_DFIFO_OVER_MASK) {
-		InstancePtr->Stats.RecvOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-	}
-
-	if (IntrStatus & XEM_EIR_RECV_LFIFO_OVER_MASK) {
-		/*
-		 * Receive Length FIFO overrun interrupts no longer occur in v1.00l
-		 * and later of the EMAC device. Frames are just dropped by the EMAC
-		 * if the length FIFO is full. The user would notice the Receive Missed
-		 * Frame count incrementing without any other errors being reported.
-		 * This code is left here for backward compatibility with v1.00k and
-		 * older EMAC devices.
-		 */
-		InstancePtr->Stats.RecvOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		ResetError = TRUE;	/* requires a reset */
-	}
-
-	if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
-		InstancePtr->Stats.RecvUnderrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		ResetError = TRUE;	/* requires a reset */
-	}
-
-	/*
-	 * Now check for general receive errors. Get the latest count where
-	 * available, otherwise just bump the statistic so we know the interrupt
-	 * occurred.
-	 */
-	if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
-		if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
-			/*
-			 * Caused by length FIFO or data FIFO overruns on receive side
-			 */
-			InstancePtr->Stats.RecvMissedFrameErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RMFC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
-			InstancePtr->Stats.RecvCollisionErrors =
-			    XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
-			InstancePtr->Stats.RecvFcsErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RFCSEC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
-			InstancePtr->Stats.RecvLengthFieldErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
-			InstancePtr->Stats.RecvShortErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
-			InstancePtr->Stats.RecvLongErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
-			InstancePtr->Stats.RecvAlignmentErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RAEC_OFFSET);
-		}
-
-		/*
-		 * Bump recv interrupts stats only if not scatter-gather DMA (this
-		 * stat gets bumped elsewhere in that case)
-		 */
-		if (!XEmac_mIsSgDma(InstancePtr)) {
-			InstancePtr->Stats.RecvInterrupts++;	/* TODO: double bump? */
-		}
-
-	}
-
-	/*
-	 * Check for transmit errors. These apply to both DMA and non-DMA modes
-	 * of operation. The entire device should be reset after overruns or
-	 * underruns.
-	 */
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
-			  XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
-		InstancePtr->Stats.XmitOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		ResetError = TRUE;
-	}
-
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
-			  XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
-		InstancePtr->Stats.XmitUnderrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		ResetError = TRUE;
-	}
-
-	if (ResetError) {
-		/*
-		 * If a reset error occurred, disable the EMAC interrupts since the
-		 * reset-causing interrupt(s) is latched in the EMAC - meaning it will
-		 * keep occurring until the device is reset. In order to give the higher
-		 * layer software time to reset the device, we have to disable the
-		 * overrun/underrun interrupts until that happens. We trust that the
-		 * higher layer resets the device. We are able to get away with disabling
-		 * all EMAC interrupts since the only interrupts it generates are for
-		 * error conditions, and we don't care about any more errors right now.
-		 */
-		XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, 0);
-
-		/*
-		 * Invoke the error handler callback, which should result in a reset
-		 * of the device by the upper layer software.
-		 */
-		InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
-					  XST_RESET_ERROR);
-	}
-}
-
-/*****************************************************************************/
-/*
-*
-* Check the receive packet FIFO for errors. FIFO error interrupts are:
-* - Deadlock.  See the XPacketFifo component for a description of deadlock on a
-*   FIFO.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, it can return an asynchronous error to the
-* application through the error handler.  It can return XST_FIFO_ERROR if a FIFO
-* error occurred.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckFifoRecvError(XEmac * InstancePtr)
-{
-	/*
-	 * Although the deadlock is currently the only interrupt from a packet
-	 * FIFO, make sure it is deadlocked before taking action. There is no
-	 * need to clear this interrupt since it requires a reset of the device.
-	 */
-	if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
-		u32 IntrEnable;
-
-		InstancePtr->Stats.FifoErrors++;
-
-		/*
-		 * Invoke the error callback function, which should result in a reset
-		 * of the device by the upper layer software. We first need to disable
-		 * the FIFO interrupt, since otherwise the upper layer thread that
-		 * handles the reset may never run because this interrupt condition
-		 * doesn't go away until a reset occurs (there is no way to ack it).
-		 */
-		IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
-		XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
-				      IntrEnable & ~XEM_IPIF_RECV_FIFO_MASK);
-
-		InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
-					  XST_FIFO_ERROR);
-	}
-}
-
-/*****************************************************************************/
-/*
-*
-* Check the send packet FIFO for errors. FIFO error interrupts are:
-* - Deadlock. See the XPacketFifo component for a description of deadlock on a
-*   FIFO.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, it can return an asynchronous error to the
-* application through the error handler.  It can return XST_FIFO_ERROR if a FIFO
-* error occurred.
-*
-* @note
-*
-* This function is intended for internal use only.
-*
-******************************************************************************/
-void
-XEmac_CheckFifoSendError(XEmac * InstancePtr)
-{
-	/*
-	 * Although the deadlock is currently the only interrupt from a packet
-	 * FIFO, make sure it is deadlocked before taking action. There is no
-	 * need to clear this interrupt since it requires a reset of the device.
-	 */
-	if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
-		u32 IntrEnable;
-
-		InstancePtr->Stats.FifoErrors++;
-
-		/*
-		 * Invoke the error callback function, which should result in a reset
-		 * of the device by the upper layer software. We first need to disable
-		 * the FIFO interrupt, since otherwise the upper layer thread that
-		 * handles the reset may never run because this interrupt condition
-		 * doesn't go away until a reset occurs (there is no way to ack it).
-		 */
-		IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
-		XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
-				      IntrEnable & ~XEM_IPIF_SEND_FIFO_MASK);
-
-		InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
-					  XST_FIFO_ERROR);
-	}
-}
diff --git a/board/xilinx/xilinx_enet/xemac_intr_dma.c b/board/xilinx/xilinx_enet/xemac_intr_dma.c
deleted file mode 100644
index 567abb42ab..0000000000
--- a/board/xilinx/xilinx_enet/xemac_intr_dma.c
+++ /dev/null
@@ -1,1344 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_intr_dma.c
-*
-* Contains functions used in interrupt mode when configured with scatter-gather
-* DMA.
-*
-* The interrupt handler, XEmac_IntrHandlerDma(), must be connected by the user
-* to the interrupt controller.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- ---------------------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00c rpm  12/05/02 New version includes support for simple DMA and the delay
-*                     argument to SgSend
-* 1.00c rpm  02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
-*                     from SetPktThreshold in the internal DMA driver. Also
-*                     avoided compiler warnings by initializing Result in the
-*                     interrupt service routines.
-* 1.00c rpm  03/26/03 Fixed a problem in the interrupt service routines where
-*                     the interrupt status was toggled clear after a call to
-*                     ErrorHandler, but if ErrorHandler reset the device the
-*                     toggle actually asserted the interrupt because the
-*                     reset had cleared it.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xbuf_descriptor.h"
-#include "xdma_channel.h"
-#include "xipif_v1_23_b.h"	/* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-static void HandleDmaRecvIntr(XEmac * InstancePtr);
-static void HandleDmaSendIntr(XEmac * InstancePtr);
-static void HandleEmacDmaIntr(XEmac * InstancePtr);
-
-/*****************************************************************************/
-/**
-*
-* Send an Ethernet frame using scatter-gather DMA. The caller attaches the
-* frame to one or more buffer descriptors, then calls this function once for
-* each descriptor. The caller is responsible for allocating and setting up the
-* descriptor. An entire Ethernet frame may or may not be contained within one
-* descriptor.  This function simply inserts the descriptor into the scatter-
-* gather engine's transmit list. The caller is responsible for providing mutual
-* exclusion to guarantee that a frame is contiguous in the transmit list. The
-* buffer attached to the descriptor must be word-aligned.
-*
-* The driver updates the descriptor with the device control register before
-* being inserted into the transmit list.  If this is the last descriptor in
-* the frame, the inserts are committed, which means the descriptors for this
-* frame are now available for transmission.
-*
-* It is assumed that the upper layer software supplies a correctly formatted
-* Ethernet frame, including the destination and source addresses, the
-* type/length field, and the data field.  It is also assumed that upper layer
-* software does not append FCS at the end of the frame.
-*
-* The buffer attached to the descriptor must be word-aligned on the front end.
-*
-* This call is non-blocking.  Notification of error or successful transmission
-* is done asynchronously through the send or error callback function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BdPtr is the address of a descriptor to be inserted into the transmit
-*        ring.
-* @param Delay indicates whether to start the scatter-gather DMA channel
-*        immediately, or whether to wait. This allows the user to build up a
-*        list of more than one descriptor before starting the transmission of
-*        the packets, which allows the application to keep up with DMA and have
-*        a constant stream of frames being transmitted. Use XEM_SGDMA_NODELAY or
-*        XEM_SGDMA_DELAY, defined in xemac.h, as the value of this argument. If
-*        the user chooses to delay and build a list, the user must call this
-*        function with the XEM_SGDMA_NODELAY option or call XEmac_Start() to
-*        kick off the tranmissions.
-*
-* @return
-*
-* - XST_SUCCESS if the buffer was successfull sent
-* - XST_DEVICE_IS_STOPPED if the Ethernet MAC has not been started yet
-* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
-* - XST_DMA_SG_LIST_FULL if the descriptor list for the DMA channel is full
-* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
-*   the list because a locked descriptor exists at the insert point
-* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
-*   list, the DMA channel believes there are no new descriptors to commit. If
-*   this is ever encountered, there is likely a thread mutual exclusion problem
-*   on transmit.
-*
-* @note
-*
-* This function is not thread-safe. The user must provide mutually exclusive
-* access to this function if there are to be multiple threads that can call it.
-*
-* @internal
-*
-* A status that should never be returned from this function, although
-* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
-* requires a list to be created, and this function requires the device to be
-* started.
-*
-******************************************************************************/
-XStatus
-XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay)
-{
-	XStatus Result;
-	u32 BdControl;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BdPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure the device is configured for scatter-gather DMA, then be sure
-	 * it is started.
-	 */
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	/*
-	 * Set some descriptor control word defaults (source address increment
-	 * and local destination address) and the destination address
-	 * (the FIFO).  These are the same for every transmit descriptor.
-	 */
-	BdControl = XBufDescriptor_GetControl(BdPtr);
-	XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_SEND_BD_MASK);
-
-	XBufDescriptor_SetDestAddress(BdPtr,
-				      InstancePtr->BaseAddress +
-				      XEM_PFIFO_TXDATA_OFFSET);
-
-	/*
-	 * Put the descriptor in the send list. The DMA component accesses data
-	 * here that can also be modified in interrupt context, so a critical
-	 * section is required.
-	 */
-	XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
-	Result = XDmaChannel_PutDescriptor(&InstancePtr->SendChannel, BdPtr);
-	if (Result != XST_SUCCESS) {
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-		return Result;
-	}
-
-	/*
-	 * If this is the last buffer in the frame, commit the inserts and start
-	 * the DMA engine if necessary
-	 */
-	if (XBufDescriptor_IsLastControl(BdPtr)) {
-		Result = XDmaChannel_CommitPuts(&InstancePtr->SendChannel);
-		if (Result != XST_SUCCESS) {
-			XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-			return Result;
-		}
-
-		if (Delay == XEM_SGDMA_NODELAY) {
-			/*
-			 * Start the DMA channel. Ignore the return status since we know the
-			 * list exists and has at least one entry and we don't care if the
-			 * channel is already started.  The DMA component accesses data here
-			 * that can be modified at interrupt or task levels, so a critical
-			 * section is required.
-			 */
-			(void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
-		}
-	}
-
-	XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Add a descriptor, with an attached empty buffer, into the receive descriptor
-* list. The buffer attached to the descriptor must be word-aligned. This is
-* used by the upper layer software during initialization when first setting up
-* the receive descriptors, and also during reception of frames to replace
-* filled buffers with empty buffers. This function can be called when the
-* device is started or stopped. Note that it does start the scatter-gather DMA
-* engine.  Although this is not necessary during initialization, it is not a
-* problem during initialization because the MAC receiver is not yet started.
-*
-* The buffer attached to the descriptor must be word-aligned on both the front
-* end and the back end.
-*
-* Notification of received frames are done asynchronously through the receive
-* callback function.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BdPtr is a pointer to the buffer descriptor that will be added to the
-*        descriptor list.
-*
-* @return
-*
-* - XST_SUCCESS if a descriptor was successfully returned to the driver
-* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
-* - XST_DMA_SG_LIST_FULL if the receive descriptor list is full
-* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
-*   the list because a locked descriptor exists at the insert point.
-* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
-*   list, the DMA channel believes there are no new descriptors to commit.
-*
-* @internal
-*
-* A status that should never be returned from this function, although
-* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
-* requires a list to be created, and this function requires the device to be
-* started.
-*
-******************************************************************************/
-XStatus
-XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr)
-{
-	XStatus Result;
-	u32 BdControl;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BdPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure the device is configured for scatter-gather DMA
-	 */
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	/*
-	 * Set some descriptor control word defaults (destination address increment
-	 * and local source address) and the source address (the FIFO). These are
-	 * the same for every receive descriptor.
-	 */
-	BdControl = XBufDescriptor_GetControl(BdPtr);
-	XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_RECV_BD_MASK);
-	XBufDescriptor_SetSrcAddress(BdPtr,
-				     InstancePtr->BaseAddress +
-				     XEM_PFIFO_RXDATA_OFFSET);
-
-	/*
-	 * Put the descriptor into the channel's descriptor list and commit.
-	 * Although this function is likely called within interrupt context, there
-	 * is the possibility that the upper layer software queues it to a task.
-	 * In this case, a critical section is needed here to protect shared data
-	 * in the DMA component.
-	 */
-	XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
-
-	Result = XDmaChannel_PutDescriptor(&InstancePtr->RecvChannel, BdPtr);
-	if (Result != XST_SUCCESS) {
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-		return Result;
-	}
-
-	Result = XDmaChannel_CommitPuts(&InstancePtr->RecvChannel);
-	if (Result != XST_SUCCESS) {
-		XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-		return Result;
-	}
-
-	/*
-	 * Start the DMA channel. Ignore the return status since we know the list
-	 * exists and has at least one entry and we don't care if the channel is
-	 * already started. The DMA component accesses data here that can be
-	 * modified at interrupt or task levels, so a critical section is required.
-	 */
-	(void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
-
-	XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* The interrupt handler for the Ethernet driver when configured with scatter-
-* gather DMA.
-*
-* Get the interrupt status from the IpIf to determine the source of the
-* interrupt.  The source can be: MAC, Recv Packet FIFO, Send Packet FIFO, Recv
-* DMA channel, or Send DMA channel. The packet FIFOs only interrupt during
-* "deadlock" conditions.
-*
-* @param InstancePtr is a pointer to the XEmac instance that just interrupted.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_IntrHandlerDma(void *InstancePtr)
-{
-	u32 IntrStatus;
-	XEmac *EmacPtr = (XEmac *) InstancePtr;
-
-	EmacPtr->Stats.TotalIntrs++;
-
-	/*
-	 * Get the interrupt status from the IPIF. There is no clearing of
-	 * interrupts in the IPIF. Interrupts must be cleared at the source.
-	 */
-	IntrStatus = XIIF_V123B_READ_DIPR(EmacPtr->BaseAddress);
-
-	/*
-	 * See which type of interrupt is being requested, and service it
-	 */
-	if (IntrStatus & XEM_IPIF_RECV_DMA_MASK) {	/* Receive DMA interrupt */
-		EmacPtr->Stats.RecvInterrupts++;
-		HandleDmaRecvIntr(EmacPtr);
-	}
-
-	if (IntrStatus & XEM_IPIF_SEND_DMA_MASK) {	/* Send DMA interrupt */
-		EmacPtr->Stats.XmitInterrupts++;
-		HandleDmaSendIntr(EmacPtr);
-	}
-
-	if (IntrStatus & XEM_IPIF_EMAC_MASK) {	/* MAC interrupt */
-		EmacPtr->Stats.EmacInterrupts++;
-		HandleEmacDmaIntr(EmacPtr);
-	}
-
-	if (IntrStatus & XEM_IPIF_RECV_FIFO_MASK) {	/* Receive FIFO interrupt */
-		EmacPtr->Stats.RecvInterrupts++;
-		XEmac_CheckFifoRecvError(EmacPtr);
-	}
-
-	if (IntrStatus & XEM_IPIF_SEND_FIFO_MASK) {	/* Send FIFO interrupt */
-		EmacPtr->Stats.XmitInterrupts++;
-		XEmac_CheckFifoSendError(EmacPtr);
-	}
-
-	if (IntrStatus & XIIF_V123B_ERROR_MASK) {
-		/*
-		 * An error occurred internal to the IPIF. This is more of a debug and
-		 * integration issue rather than a production error. Don't do anything
-		 * other than clear it, which provides a spot for software to trap
-		 * on the interrupt and begin debugging.
-		 */
-		XIIF_V123B_WRITE_DISR(EmacPtr->BaseAddress,
-				      XIIF_V123B_ERROR_MASK);
-	}
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the packet count threshold for this device. The device must be stopped
-* before setting the threshold. The packet count threshold is used for interrupt
-* coalescing, which reduces the frequency of interrupts from the device to the
-* processor. In this case, the scatter-gather DMA engine only interrupts when
-* the packet count threshold is reached, instead of interrupting for each packet.
-* A packet is a generic term used by the scatter-gather DMA engine, and is
-* equivalent to an Ethernet frame in our case.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-*        threshold register is read.
-* @param Threshold is the value of the packet threshold count used during
-*        interrupt coalescing. A value of 0 disables the use of packet threshold
-*        by the hardware.
-*
-* @return
-*
-* - XST_SUCCESS if the threshold was successfully set
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-*   asserts would also catch this error.
-*
-* @note
-*
-* The packet threshold could be set to larger than the number of descriptors
-* allocated to the DMA channel. In this case, the wait bound will take over
-* and always indicate data arrival. There was a check in this function that
-* returned an error if the treshold was larger than the number of descriptors,
-* but that was removed because users would then have to set the threshold
-* only after they set descriptor space, which is an order dependency that
-* caused confustion.
-*
-******************************************************************************/
-XStatus
-XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure device is configured for scatter-gather DMA and has been stopped
-	 */
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	/*
-	 * Based on the direction, set the packet threshold in the
-	 * corresponding DMA channel component.  Default to the receive
-	 * channel threshold register (if an invalid Direction is passed).
-	 */
-	switch (Direction) {
-	case XEM_SEND:
-		return XDmaChannel_SetPktThreshold(&InstancePtr->SendChannel,
-						   Threshold);
-
-	case XEM_RECV:
-		return XDmaChannel_SetPktThreshold(&InstancePtr->RecvChannel,
-						   Threshold);
-
-	default:
-		return XST_INVALID_PARAM;
-	}
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the value of the packet count threshold for this driver/device. The packet
-* count threshold is used for interrupt coalescing, which reduces the frequency
-* of interrupts from the device to the processor. In this case, the
-* scatter-gather DMA engine only interrupts when the packet count threshold is
-* reached, instead of interrupting for each packet. A packet is a generic term
-* used by the scatter-gather DMA engine, and is equivalent to an Ethernet frame
-* in our case.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-*        threshold register is read.
-* @param ThreshPtr is a pointer to the byte into which the current value of the
-*        packet threshold register will be copied. An output parameter. A value
-*        of 0 indicates the use of packet threshold by the hardware is disabled.
-*
-* @return
-*
-* - XST_SUCCESS if the packet threshold was retrieved successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-*   asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 * ThreshPtr)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
-	XASSERT_NONVOID(ThreshPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	/*
-	 * Based on the direction, return the packet threshold set in the
-	 * corresponding DMA channel component.  Default to the value in
-	 * the receive channel threshold register (if an invalid Direction
-	 * is passed).
-	 */
-	switch (Direction) {
-	case XEM_SEND:
-		*ThreshPtr =
-		    XDmaChannel_GetPktThreshold(&InstancePtr->SendChannel);
-		break;
-
-	case XEM_RECV:
-		*ThreshPtr =
-		    XDmaChannel_GetPktThreshold(&InstancePtr->RecvChannel);
-		break;
-
-	default:
-		return XST_INVALID_PARAM;
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the packet wait bound timer for this driver/device. The device must be
-* stopped before setting the timer value. The packet wait bound is used during
-* interrupt coalescing to trigger an interrupt when not enough packets have been
-* received to reach the packet count threshold. A packet is a generic term used
-* by the scatter-gather DMA engine, and is equivalent to an Ethernet frame in
-* our case. The timer is in milliseconds.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-*        threshold register is read.
-* @param TimerValue is the value of the packet wait bound used during interrupt
-*        coalescing. It is in milliseconds in the range 0  - 1023. A value of 0
-*        disables the packet wait bound timer.
-*
-* @return
-*
-* - XST_SUCCESS if the packet wait bound was set successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-*   asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 TimerValue)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
-	XASSERT_NONVOID(TimerValue <= XEM_SGDMA_MAX_WAITBOUND);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure device is configured for scatter-gather DMA and has been stopped
-	 */
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	/*
-	 * Based on the direction, set the packet wait bound in the
-	 * corresponding DMA channel component.  Default to the receive
-	 * channel wait bound register (if an invalid Direction is passed).
-	 */
-	switch (Direction) {
-	case XEM_SEND:
-		XDmaChannel_SetPktWaitBound(&InstancePtr->SendChannel,
-					    TimerValue);
-		break;
-
-	case XEM_RECV:
-		XDmaChannel_SetPktWaitBound(&InstancePtr->RecvChannel,
-					    TimerValue);
-		break;
-
-	default:
-		return XST_INVALID_PARAM;
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the packet wait bound timer for this driver/device. The packet wait bound
-* is used during interrupt coalescing to trigger an interrupt when not enough
-* packets have been received to reach the packet count threshold. A packet is a
-* generic term used by the scatter-gather DMA engine, and is equivalent to an
-* Ethernet frame in our case. The timer is in milliseconds.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Direction indicates the channel, send or receive, from which the
-*        threshold register is read.
-* @param WaitPtr is a pointer to the byte into which the current value of the
-*        packet wait bound register will be copied. An output parameter. Units
-*        are in milliseconds in the range 0  - 1023. A value of 0 indicates the
-*        packet wait bound timer is disabled.
-*
-* @return
-*
-* - XST_SUCCESS if the packet wait bound was retrieved successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
-*   asserts would also catch this error.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 * WaitPtr)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
-	XASSERT_NONVOID(WaitPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	/*
-	 * Based on the direction, return the packet wait bound set in the
-	 * corresponding DMA channel component.  Default to the value in
-	 * the receive channel wait bound register (if an invalid Direction
-	 * is passed).
-	 */
-	switch (Direction) {
-	case XEM_SEND:
-		*WaitPtr =
-		    XDmaChannel_GetPktWaitBound(&InstancePtr->SendChannel);
-		break;
-
-	case XEM_RECV:
-		*WaitPtr =
-		    XDmaChannel_GetPktWaitBound(&InstancePtr->RecvChannel);
-		break;
-
-	default:
-		return XST_INVALID_PARAM;
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Give the driver the memory space to be used for the scatter-gather DMA
-* receive descriptor list. This function should only be called once, during
-* initialization of the Ethernet driver. The memory space must be big enough
-* to hold some number of descriptors, depending on the needs of the system.
-* The xemac.h file defines minimum and default numbers of descriptors
-* which can be used to allocate this memory space.
-*
-* The memory space must be word-aligned. An assert will occur if asserts are
-* turned on and the memory is not word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param MemoryPtr is a pointer to the word-aligned memory.
-* @param ByteCount is the length, in bytes, of the memory space.
-*
-* @return
-*
-* - XST_SUCCESS if the space was initialized successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
-*
-* @note
-*
-* If the device is configured for scatter-gather DMA, this function must be
-* called AFTER the XEmac_Initialize() function because the DMA channel
-* components must be initialized before the memory space is set.
-*
-******************************************************************************/
-XStatus
-XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(MemoryPtr != NULL);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	return XDmaChannel_CreateSgList(&InstancePtr->RecvChannel, MemoryPtr,
-					ByteCount);
-}
-
-/*****************************************************************************/
-/**
-*
-* Give the driver the memory space to be used for the scatter-gather DMA
-* transmit descriptor list. This function should only be called once, during
-* initialization of the Ethernet driver. The memory space must be big enough
-* to hold some number of descriptors, depending on the needs of the system.
-* The xemac.h file defines minimum and default numbers of descriptors
-* which can be used to allocate this memory space.
-*
-* The memory space must be word-aligned. An assert will occur if asserts are
-* turned on and the memory is not word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param MemoryPtr is a pointer to the word-aligned memory.
-* @param ByteCount is the length, in bytes, of the memory space.
-*
-* @return
-*
-* - XST_SUCCESS if the space was initialized successfully
-* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
-* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
-*
-* @note
-*
-* If the device is configured for scatter-gather DMA, this function must be
-* called AFTER the XEmac_Initialize() function because the DMA channel
-* components must be initialized before the memory space is set.
-*
-******************************************************************************/
-XStatus
-XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
-{
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(MemoryPtr != NULL);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	if (!XEmac_mIsSgDma(InstancePtr)) {
-		return XST_NOT_SGDMA;
-	}
-
-	return XDmaChannel_CreateSgList(&InstancePtr->SendChannel, MemoryPtr,
-					ByteCount);
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling received frames in scatter-gather DMA
-* mode.  The upper layer software should call this function during
-* initialization.  The callback is called once per frame received. The head of
-* a descriptor list is passed in along with the number of descriptors in the
-* list. Before leaving the callback, the upper layer software should attach a
-* new buffer to each descriptor in the list.
-*
-* The callback is invoked by the driver within interrupt context, so it needs
-* to do its job quickly. Sending the received frame up the protocol stack
-* should be done at task-level. If there are other potentially slow operations
-* within the callback, these too should be done at task-level.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-*        the callback. This helps the adapter correlate the callback to a
-*        particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
-		       XEmac_SgHandler FuncPtr)
-{
-	/*
-	 * Asserted IsDmaSg here instead of run-time check because there is really
-	 * no ill-effects of setting these when not configured for scatter-gather.
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(FuncPtr != NULL);
-	XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	InstancePtr->SgRecvHandler = FuncPtr;
-	InstancePtr->SgRecvRef = CallBackRef;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the callback function for handling confirmation of transmitted frames in
-* scatter-gather DMA mode.  The upper layer software should call this function
-* during initialization.  The callback is called once per frame sent. The head
-* of a descriptor list is passed in along with the number of descriptors in
-* the list. The callback is responsible for freeing buffers attached to these
-* descriptors.
-*
-* The callback is invoked by the driver within interrupt context, so it needs
-* to do its job quickly. If there are potentially slow operations within the
-* callback, these should be done at task-level.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param CallBackRef is a reference pointer to be passed back to the adapter in
-*        the callback. This helps the adapter correlate the callback to a
-*        particular driver.
-* @param FuncPtr is the pointer to the callback function.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
-		       XEmac_SgHandler FuncPtr)
-{
-	/*
-	 * Asserted IsDmaSg here instead of run-time check because there is really
-	 * no ill-effects of setting these when not configured for scatter-gather.
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(FuncPtr != NULL);
-	XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	InstancePtr->SgSendHandler = FuncPtr;
-	InstancePtr->SgSendRef = CallBackRef;
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the DMA receive channel. DMA interrupts are:
-*
-* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
-*   that requires reset of the channel.  The driver calls the error handler
-*   of the upper layer software with an error code indicating the device should
-*   be reset.
-* - Packet count threshold reached.  For scatter-gather operations, indicates
-*   the threshold for the number of packets not serviced by software has been
-*   reached. The driver behaves as follows:
-*       - Get the value of the packet counter, which tells us how many packets
-*         are ready to be serviced
-*       - For each packet
-*           - For each descriptor, remove it from the scatter-gather list
-*           - Check for the last descriptor in the frame, and if set
-*               - Bump frame statistics
-*               - Call the scatter-gather receive callback function
-*               - Decrement the packet counter by one
-*       Note that there are no receive errors reported in the status word of
-*       the buffer descriptor.  If receive errors occur, the MAC drops the
-*       packet, and we only find out about the errors through various error
-*       count registers.
-* - Packet wait bound reached.  For scatter-gather, indicates the time to wait
-*   for the next packet has expired.  The driver follows the same logic as when
-*   the packet count threshold interrupt is received.
-* - Scatter-gather end acknowledge.  Hardware has reached the end of the
-*   descriptor list.  The driver follows the same logic as when the packet count
-*   threshold interrupt is received. In addition, the driver restarts the DMA
-*   scatter-gather channel in case there are newly inserted descriptors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, there are asynchronous errors that can
-* be generated (by calling the ErrorHandler) from this function.  These are:
-* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from the
-*   DMA channel, but there was not one ready for software.
-* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a fatal
-*   error that requires reset.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleDmaRecvIntr(XEmac * InstancePtr)
-{
-	u32 IntrStatus;
-
-	/*
-	 * Read the interrupt status
-	 */
-	IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->RecvChannel);
-
-	/*
-	 * For packet threshold or wait bound interrupts, process desciptors. Also
-	 * process descriptors on a SG end acknowledgement, which means the end of
-	 * the descriptor list has been reached by the hardware. For receive, this
-	 * is potentially trouble since it means the descriptor list is full,
-	 * unless software can process enough packets quickly enough so the
-	 * hardware has room to put new packets.
-	 */
-	if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
-			  XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
-		XStatus Result = XST_SUCCESS;
-		u32 NumFrames;
-		u32 NumProcessed;
-		u32 NumBuffers;
-		u32 NumBytes;
-		u32 IsLast;
-		XBufDescriptor *FirstBdPtr;
-		XBufDescriptor *BdPtr;
-
-		/*
-		 * Get the number of unserviced packets
-		 */
-		NumFrames = XDmaChannel_GetPktCount(&InstancePtr->RecvChannel);
-
-		for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
-			IsLast = FALSE;
-			FirstBdPtr = NULL;
-			NumBuffers = 0;
-			NumBytes = 0;
-
-			/*
-			 * For each packet, get the descriptor from the list. On the
-			 * last one in the frame, make the callback to the upper layer.
-			 */
-			while (!IsLast) {
-				Result =
-				    XDmaChannel_GetDescriptor(&InstancePtr->
-							      RecvChannel,
-							      &BdPtr);
-				if (Result != XST_SUCCESS) {
-					/*
-					 * An error getting a buffer descriptor from the list.
-					 * This should not happen, but if it does, report it to
-					 * the error callback and break out of the loops to service
-					 * other interrupts.
-					 */
-					InstancePtr->ErrorHandler(InstancePtr->
-								  ErrorRef,
-								  Result);
-					break;
-				}
-
-				/*
-				 * Keep a pointer to the first descriptor in the list, as it
-				 * will be passed to the upper layers in a bit. By the fact
-				 * that we received this packet means no errors occurred, so
-				 * no need to check the device status word for errors.
-				 */
-				if (FirstBdPtr == NULL) {
-					FirstBdPtr = BdPtr;
-				}
-
-				NumBytes += XBufDescriptor_GetLength(BdPtr);
-
-				/*
-				 * Check to see if this is the last descriptor in the frame,
-				 * and if so, set the IsLast flag to get out of the loop.
-				 */
-				if (XBufDescriptor_IsLastStatus(BdPtr)) {
-					IsLast = TRUE;
-				}
-
-				/*
-				 * Bump the number of buffers in this packet
-				 */
-				NumBuffers++;
-
-			}	/* end while loop */
-
-			/*
-			 * Check for error that occurred inside the while loop, and break
-			 * out of the for loop if there was one so other interrupts can
-			 * be serviced.
-			 */
-			if (Result != XST_SUCCESS) {
-				break;
-			}
-
-			InstancePtr->Stats.RecvFrames++;
-			InstancePtr->Stats.RecvBytes += NumBytes;
-
-			/*
-			 * Make the callback to the upper layers, passing it the first
-			 * descriptor in the packet and the number of descriptors in the
-			 * packet.
-			 */
-			InstancePtr->SgRecvHandler(InstancePtr->SgRecvRef,
-						   FirstBdPtr, NumBuffers);
-
-			/*
-			 * Decrement the packet count register to reflect the fact we
-			 * just processed a packet
-			 */
-			XDmaChannel_DecrementPktCount(&InstancePtr->
-						      RecvChannel);
-
-		}		/* end for loop */
-
-		/*
-		 * If the interrupt was an end-ack, check the descriptor list again to
-		 * see if it is empty. If not, go ahead and restart the scatter-gather
-		 * channel. This is to fix a possible race condition where, on receive,
-		 * the driver attempted to start a scatter-gather channel that was
-		 * already started, which resulted in no action from the XDmaChannel
-		 * component. But, just after the XDmaChannel component saw that the
-		 * hardware was already started, the hardware stopped because it
-		 * reached the end of the list.  In that case, this interrupt is
-		 * generated and we can restart the hardware here.
-		 */
-		if (IntrStatus & XDC_IXR_SG_END_MASK) {
-			/*
-			 * Ignore the return status since we know the list exists and we
-			 * don't care if the list is empty or the channel is already started.
-			 */
-			(void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
-		}
-	}
-
-	/*
-	 * All interrupts are handled (except the error below) so acknowledge
-	 * (clear) the interrupts by writing the value read above back to the status
-	 * register. The packet count interrupt must be acknowledged after the
-	 * decrement, otherwise it will come right back. We clear the interrupts
-	 * before we handle the error interrupt because the ErrorHandler should
-	 * result in a reset, which clears the interrupt status register. So we
-	 * don't want to toggle the interrupt back on by writing the interrupt
-	 * status register with an old value after a reset.
-	 */
-	XDmaChannel_SetIntrStatus(&InstancePtr->RecvChannel, IntrStatus);
-
-	/*
-	 * Check for DMA errors and call the error callback function if an error
-	 * occurred (DMA bus or timeout error), which should result in a reset of
-	 * the device by the upper layer software.
-	 */
-	if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
-		InstancePtr->Stats.DmaErrors++;
-		InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
-	}
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the DMA send channel. DMA interrupts are:
-*
-* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
-*   that requires reset of the channel.  The driver calls the error handler
-*   of the upper layer software with an error code indicating the device should
-*   be reset.
-* - Packet count threshold reached.  For scatter-gather operations, indicates
-*   the threshold for the number of packets not serviced by software has been
-*   reached. The driver behaves as follows:
-*       - Get the value of the packet counter, which tells us how many packets
-*         are ready to be serviced
-*       - For each packet
-*           - For each descriptor, remove it from the scatter-gather list
-*           - Check for the last descriptor in the frame, and if set
-*               - Bump frame statistics
-*               - Call the scatter-gather receive callback function
-*               - Decrement the packet counter by one
-*       Note that there are no receive errors reported in the status word of
-*       the buffer descriptor.  If receive errors occur, the MAC drops the
-*       packet, and we only find out about the errors through various error
-*       count registers.
-* - Packet wait bound reached.  For scatter-gather, indicates the time to wait
-*   for the next packet has expired.  The driver follows the same logic as when
-*   the packet count threshold interrupt is received.
-* - Scatter-gather end acknowledge.  Hardware has reached the end of the
-*   descriptor list.  The driver follows the same logic as when the packet count
-*   threshold interrupt is received. In addition, the driver restarts the DMA
-*   scatter-gather channel in case there are newly inserted descriptors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* Although the function returns void, there are asynchronous errors
-* that can be generated from this function.  These are:
-* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from
-*   the DMA channel, but there was not one ready for software.
-* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a
-*   fatal error that requires reset.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleDmaSendIntr(XEmac * InstancePtr)
-{
-	u32 IntrStatus;
-
-	/*
-	 * Read the interrupt status
-	 */
-	IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->SendChannel);
-
-	/*
-	 * For packet threshold or wait bound interrupt, process descriptors. Also
-	 * process descriptors on a SG end acknowledgement, which means the end of
-	 * the descriptor list has been reached by the hardware. For transmit,
-	 * this is a normal condition during times of light traffic.  In fact, the
-	 * wait bound interrupt may be masked for transmit since the end-ack would
-	 * always occur before the wait bound expires.
-	 */
-	if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
-			  XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
-		XStatus Result = XST_SUCCESS;
-		u32 NumFrames;
-		u32 NumProcessed;
-		u32 NumBuffers;
-		u32 NumBytes;
-		u32 IsLast;
-		XBufDescriptor *FirstBdPtr;
-		XBufDescriptor *BdPtr;
-
-		/*
-		 * Get the number of unserviced packets
-		 */
-		NumFrames = XDmaChannel_GetPktCount(&InstancePtr->SendChannel);
-
-		for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
-			IsLast = FALSE;
-			FirstBdPtr = NULL;
-			NumBuffers = 0;
-			NumBytes = 0;
-
-			/*
-			 * For each frame, traverse the descriptor list and look for
-			 * errors. On the last one in the frame, make the callback.
-			 */
-			while (!IsLast) {
-				Result =
-				    XDmaChannel_GetDescriptor(&InstancePtr->
-							      SendChannel,
-							      &BdPtr);
-				if (Result != XST_SUCCESS) {
-					/*
-					 * An error getting a buffer descriptor from the list.
-					 * This should not happen, but if it does, report it to
-					 * the error callback and break out of the loops to service
-					 * other interrupts
-					 */
-					InstancePtr->ErrorHandler(InstancePtr->
-								  ErrorRef,
-								  Result);
-					break;
-				}
-
-				/*
-				 * Keep a pointer to the first descriptor in the list and
-				 * check the device status for errors. The device status is
-				 * only available in the first descriptor of a packet.
-				 */
-				if (FirstBdPtr == NULL) {
-					u32 XmitStatus;
-
-					FirstBdPtr = BdPtr;
-
-					XmitStatus =
-					    XBufDescriptor_GetDeviceStatus
-					    (BdPtr);
-					if (XmitStatus &
-					    XEM_TSR_EXCESS_DEFERRAL_MASK) {
-						InstancePtr->Stats.
-						    XmitExcessDeferral++;
-					}
-
-					if (XmitStatus &
-					    XEM_TSR_LATE_COLLISION_MASK) {
-						InstancePtr->Stats.
-						    XmitLateCollisionErrors++;
-					}
-				}
-
-				NumBytes += XBufDescriptor_GetLength(BdPtr);
-
-				/*
-				 * Check to see if this is the last descriptor in the frame,
-				 * and if so, set the IsLast flag to get out of the loop. The
-				 * transmit channel must check the last bit in the control
-				 * word, not the status word (the DMA engine does not update
-				 * the last bit in the status word for the transmit direction).
-				 */
-				if (XBufDescriptor_IsLastControl(BdPtr)) {
-					IsLast = TRUE;
-				}
-
-				/*
-				 * Bump the number of buffers in this packet
-				 */
-				NumBuffers++;
-
-			}	/* end while loop */
-
-			/*
-			 * Check for error that occurred inside the while loop, and break
-			 * out of the for loop if there was one so other interrupts can
-			 * be serviced.
-			 */
-			if (Result != XST_SUCCESS) {
-				break;
-			}
-
-			InstancePtr->Stats.XmitFrames++;
-			InstancePtr->Stats.XmitBytes += NumBytes;
-
-			/*
-			 * Make the callback to the upper layers, passing it the first
-			 * descriptor in the packet and the number of descriptors in the
-			 * packet.
-			 */
-			InstancePtr->SgSendHandler(InstancePtr->SgSendRef,
-						   FirstBdPtr, NumBuffers);
-
-			/*
-			 * Decrement the packet count register to reflect the fact we
-			 * just processed a packet
-			 */
-			XDmaChannel_DecrementPktCount(&InstancePtr->
-						      SendChannel);
-
-		}		/* end for loop */
-
-		/*
-		 * If the interrupt was an end-ack, check the descriptor list again to
-		 * see if it is empty. If not, go ahead and restart the scatter-gather
-		 * channel. This is to fix a possible race condition where, on transmit,
-		 * the driver attempted to start a scatter-gather channel that was
-		 * already started, which resulted in no action from the XDmaChannel
-		 * component. But, just after the XDmaChannel component saw that the
-		 * hardware was already started, the hardware stopped because it
-		 * reached the end of the list.  In that case, this interrupt is
-		 * generated and we can restart the hardware here.
-		 */
-		if (IntrStatus & XDC_IXR_SG_END_MASK) {
-			/*
-			 * Ignore the return status since we know the list exists and we
-			 * don't care if the list is empty or the channel is already started.
-			 */
-			(void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
-		}
-	}
-
-	/*
-	 * All interrupts are handled (except the error below) so acknowledge
-	 * (clear) the interrupts by writing the value read above back to the status
-	 * register. The packet count interrupt must be acknowledged after the
-	 * decrement, otherwise it will come right back. We clear the interrupts
-	 * before we handle the error interrupt because the ErrorHandler should
-	 * result in a reset, which clears the interrupt status register. So we
-	 * don't want to toggle the interrupt back on by writing the interrupt
-	 * status register with an old value after a reset.
-	 */
-	XDmaChannel_SetIntrStatus(&InstancePtr->SendChannel, IntrStatus);
-
-	/*
-	 * Check for DMA errors and call the error callback function if an error
-	 * occurred (DMA bus or timeout error), which should result in a reset of
-	 * the device by the upper layer software.
-	 */
-	if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
-		InstancePtr->Stats.DmaErrors++;
-		InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
-	}
-}
-
-/*****************************************************************************/
-/*
-*
-* Handle an interrupt from the Ethernet MAC when configured with scatter-gather
-* DMA. The only interrupts handled in this case are errors.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static void
-HandleEmacDmaIntr(XEmac * InstancePtr)
-{
-	u32 IntrStatus;
-
-	/*
-	 * When configured with DMA, the EMAC generates interrupts only when errors
-	 * occur. We clear the interrupts immediately so that any latched status
-	 * interrupt bits will reflect the true status of the device, and so any
-	 * pulsed interrupts (non-status) generated during the Isr will not be lost.
-	 */
-	IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-	XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, IntrStatus);
-
-	/*
-	 * Check the MAC for errors
-	 */
-	XEmac_CheckEmacError(InstancePtr, IntrStatus);
-}
diff --git a/board/xilinx/xilinx_enet/xemac_l.h b/board/xilinx/xilinx_enet/xemac_l.h
deleted file mode 100644
index a463937dbd..0000000000
--- a/board/xilinx/xilinx_enet/xemac_l.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device.  High-level driver functions
-* are defined in xemac.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm  04/26/02 First release
-* 1.00b rmm  09/23/02 Added XEmac_mPhyReset macro
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XEMAC_L_H		/* prevent circular inclusions */
-#define XEMAC_L_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/* Offset of the MAC registers from the IPIF base address */
-#define XEM_REG_OFFSET	   0x1100UL
-
-/*
- * Register offsets for the Ethernet MAC. Each register is 32 bits.
- */
-#define XEM_EMIR_OFFSET	  (XEM_REG_OFFSET + 0x0)	/* EMAC Module ID */
-#define XEM_ECR_OFFSET	  (XEM_REG_OFFSET + 0x4)	/* MAC Control */
-#define XEM_IFGP_OFFSET	  (XEM_REG_OFFSET + 0x8)	/* Interframe Gap */
-#define XEM_SAH_OFFSET	  (XEM_REG_OFFSET + 0xC)	/* Station addr, high */
-#define XEM_SAL_OFFSET	  (XEM_REG_OFFSET + 0x10)	/* Station addr, low */
-#define XEM_MGTCR_OFFSET  (XEM_REG_OFFSET + 0x14)	/* MII mgmt control */
-#define XEM_MGTDR_OFFSET  (XEM_REG_OFFSET + 0x18)	/* MII mgmt data */
-#define XEM_RPLR_OFFSET	  (XEM_REG_OFFSET + 0x1C)	/* Rx packet length */
-#define XEM_TPLR_OFFSET	  (XEM_REG_OFFSET + 0x20)	/* Tx packet length */
-#define XEM_TSR_OFFSET	  (XEM_REG_OFFSET + 0x24)	/* Tx status */
-#define XEM_RMFC_OFFSET	  (XEM_REG_OFFSET + 0x28)	/* Rx missed frames */
-#define XEM_RCC_OFFSET	  (XEM_REG_OFFSET + 0x2C)	/* Rx collisions */
-#define XEM_RFCSEC_OFFSET (XEM_REG_OFFSET + 0x30)	/* Rx FCS errors */
-#define XEM_RAEC_OFFSET	  (XEM_REG_OFFSET + 0x34)	/* Rx alignment errors */
-#define XEM_TEDC_OFFSET	  (XEM_REG_OFFSET + 0x38)	/* Transmit excess
-							 * deferral cnt */
-
-/*
- * Register offsets for the IPIF components
- */
-#define XEM_ISR_OFFSET		 0x20UL /* Interrupt status */
-
-#define XEM_DMA_OFFSET		 0x2300UL
-#define XEM_DMA_SEND_OFFSET	 (XEM_DMA_OFFSET + 0x0) /* DMA send channel */
-#define XEM_DMA_RECV_OFFSET	 (XEM_DMA_OFFSET + 0x40)	/* DMA recv channel */
-
-#define XEM_PFIFO_OFFSET	 0x2000UL
-#define XEM_PFIFO_TXREG_OFFSET	 (XEM_PFIFO_OFFSET + 0x0)	/* Tx registers */
-#define XEM_PFIFO_RXREG_OFFSET	 (XEM_PFIFO_OFFSET + 0x10)	/* Rx registers */
-#define XEM_PFIFO_TXDATA_OFFSET	 (XEM_PFIFO_OFFSET + 0x100)	/* Tx keyhole */
-#define XEM_PFIFO_RXDATA_OFFSET	 (XEM_PFIFO_OFFSET + 0x200)	/* Rx keyhole */
-
-/*
- * EMAC Module Identification Register (EMIR)
- */
-#define XEM_EMIR_VERSION_MASK	 0xFFFF0000UL	/* Device version */
-#define XEM_EMIR_TYPE_MASK	 0x0000FF00UL	/* Device type */
-
-/*
- * EMAC Control Register (ECR)
- */
-#define XEM_ECR_FULL_DUPLEX_MASK	 0x80000000UL	/* Full duplex mode */
-#define XEM_ECR_XMIT_RESET_MASK		 0x40000000UL	/* Reset transmitter */
-#define XEM_ECR_XMIT_ENABLE_MASK	 0x20000000UL	/* Enable transmitter */
-#define XEM_ECR_RECV_RESET_MASK		 0x10000000UL	/* Reset receiver */
-#define XEM_ECR_RECV_ENABLE_MASK	 0x08000000UL	/* Enable receiver */
-#define XEM_ECR_PHY_ENABLE_MASK		 0x04000000UL	/* Enable PHY */
-#define XEM_ECR_XMIT_PAD_ENABLE_MASK	 0x02000000UL	/* Enable xmit pad insert */
-#define XEM_ECR_XMIT_FCS_ENABLE_MASK	 0x01000000UL	/* Enable xmit FCS insert */
-#define XEM_ECR_XMIT_ADDR_INSERT_MASK	 0x00800000UL	/* Enable xmit source addr
-							 * insertion */
-#define XEM_ECR_XMIT_ERROR_INSERT_MASK	 0x00400000UL	/* Insert xmit error */
-#define XEM_ECR_XMIT_ADDR_OVWRT_MASK	 0x00200000UL	/* Enable xmit source addr
-							 * overwrite */
-#define XEM_ECR_LOOPBACK_MASK		 0x00100000UL	/* Enable internal
-							 * loopback */
-#define XEM_ECR_RECV_STRIP_ENABLE_MASK	 0x00080000UL	/* Enable recv pad/fcs strip */
-#define XEM_ECR_UNICAST_ENABLE_MASK	 0x00020000UL	/* Enable unicast addr */
-#define XEM_ECR_MULTI_ENABLE_MASK	 0x00010000UL	/* Enable multicast addr */
-#define XEM_ECR_BROAD_ENABLE_MASK	 0x00008000UL	/* Enable broadcast addr */
-#define XEM_ECR_PROMISC_ENABLE_MASK	 0x00004000UL	/* Enable promiscuous mode */
-#define XEM_ECR_RECV_ALL_MASK		 0x00002000UL	/* Receive all frames */
-#define XEM_ECR_RESERVED2_MASK		 0x00001000UL	/* Reserved */
-#define XEM_ECR_MULTI_HASH_ENABLE_MASK	 0x00000800UL	/* Enable multicast hash */
-#define XEM_ECR_PAUSE_FRAME_MASK	 0x00000400UL	/* Interpret pause frames */
-#define XEM_ECR_CLEAR_HASH_MASK		 0x00000200UL	/* Clear hash table */
-#define XEM_ECR_ADD_HASH_ADDR_MASK	 0x00000100UL	/* Add hash table address */
-
-/*
- * Interframe Gap Register (IFGR)
- */
-#define XEM_IFGP_PART1_MASK	    0xF8000000UL	/* Interframe Gap Part1 */
-#define XEM_IFGP_PART1_SHIFT	    27
-#define XEM_IFGP_PART2_MASK	    0x07C00000UL	/* Interframe Gap Part2 */
-#define XEM_IFGP_PART2_SHIFT	    22
-
-/*
- * Station Address High Register (SAH)
- */
-#define XEM_SAH_ADDR_MASK	    0x0000FFFFUL	/* Station address high bytes */
-
-/*
- * Station Address Low Register (SAL)
- */
-#define XEM_SAL_ADDR_MASK	    0xFFFFFFFFUL	/* Station address low bytes */
-
-/*
- * MII Management Control Register (MGTCR)
- */
-#define XEM_MGTCR_START_MASK	    0x80000000UL	/* Start/Busy */
-#define XEM_MGTCR_RW_NOT_MASK	    0x40000000UL	/* Read/Write Not (direction) */
-#define XEM_MGTCR_PHY_ADDR_MASK	    0x3E000000UL	/* PHY address */
-#define XEM_MGTCR_PHY_ADDR_SHIFT    25	/* PHY address shift */
-#define XEM_MGTCR_REG_ADDR_MASK	    0x01F00000UL	/* Register address */
-#define XEM_MGTCR_REG_ADDR_SHIFT    20	/* Register addr shift */
-#define XEM_MGTCR_MII_ENABLE_MASK   0x00080000UL	/* Enable MII from EMAC */
-#define XEM_MGTCR_RD_ERROR_MASK	    0x00040000UL	/* MII mgmt read error */
-
-/*
- * MII Management Data Register (MGTDR)
- */
-#define XEM_MGTDR_DATA_MASK	    0x0000FFFFUL	/* MII data */
-
-/*
- * Receive Packet Length Register (RPLR)
- */
-#define XEM_RPLR_LENGTH_MASK	    0x0000FFFFUL	/* Receive packet length */
-
-/*
- * Transmit Packet Length Register (TPLR)
- */
-#define XEM_TPLR_LENGTH_MASK	    0x0000FFFFUL	/* Transmit packet length */
-
-/*
- * Transmit Status Register (TSR)
- */
-#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL	/* Transmit excess deferral */
-#define XEM_TSR_FIFO_UNDERRUN_MASK   0x40000000UL	/* Packet FIFO underrun */
-#define XEM_TSR_ATTEMPTS_MASK	     0x3E000000UL	/* Transmission attempts */
-#define XEM_TSR_LATE_COLLISION_MASK  0x01000000UL	/* Transmit late collision */
-
-/*
- * Receive Missed Frame Count (RMFC)
- */
-#define XEM_RMFC_DATA_MASK	    0x0000FFFFUL
-
-/*
- * Receive Collision Count (RCC)
- */
-#define XEM_RCC_DATA_MASK	    0x0000FFFFUL
-
-/*
- * Receive FCS Error Count (RFCSEC)
- */
-#define XEM_RFCSEC_DATA_MASK	    0x0000FFFFUL
-
-/*
- * Receive Alignment Error Count (RALN)
- */
-#define XEM_RAEC_DATA_MASK	    0x0000FFFFUL
-
-/*
- * Transmit Excess Deferral Count (TEDC)
- */
-#define XEM_TEDC_DATA_MASK	    0x0000FFFFUL
-
-/*
- * EMAC Interrupt Registers (Status and Enable) masks. These registers are
- * part of the IPIF IP Interrupt registers
- */
-#define XEM_EIR_XMIT_DONE_MASK	       0x00000001UL	/* Xmit complete */
-#define XEM_EIR_RECV_DONE_MASK	       0x00000002UL	/* Recv complete */
-#define XEM_EIR_XMIT_ERROR_MASK	       0x00000004UL	/* Xmit error */
-#define XEM_EIR_RECV_ERROR_MASK	       0x00000008UL	/* Recv error */
-#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK  0x00000010UL	/* Xmit status fifo empty */
-#define XEM_EIR_RECV_LFIFO_EMPTY_MASK  0x00000020UL	/* Recv length fifo empty */
-#define XEM_EIR_XMIT_LFIFO_FULL_MASK   0x00000040UL	/* Xmit length fifo full */
-#define XEM_EIR_RECV_LFIFO_OVER_MASK   0x00000080UL	/* Recv length fifo
-							 * overrun */
-#define XEM_EIR_RECV_LFIFO_UNDER_MASK  0x00000100UL	/* Recv length fifo
-							 * underrun */
-#define XEM_EIR_XMIT_SFIFO_OVER_MASK   0x00000200UL	/* Xmit status fifo
-							 * overrun */
-#define XEM_EIR_XMIT_SFIFO_UNDER_MASK  0x00000400UL	/* Transmit status fifo
-							 * underrun */
-#define XEM_EIR_XMIT_LFIFO_OVER_MASK   0x00000800UL	/* Transmit length fifo
-							 * overrun */
-#define XEM_EIR_XMIT_LFIFO_UNDER_MASK  0x00001000UL	/* Transmit length fifo
-							 * underrun */
-#define XEM_EIR_XMIT_PAUSE_MASK	       0x00002000UL	/* Transmit pause pkt
-							 * received */
-#define XEM_EIR_RECV_DFIFO_OVER_MASK   0x00004000UL	/* Receive data fifo
-							 * overrun */
-#define XEM_EIR_RECV_MISSED_FRAME_MASK 0x00008000UL	/* Receive missed frame
-							 * error */
-#define XEM_EIR_RECV_COLLISION_MASK    0x00010000UL	/* Receive collision
-							 * error */
-#define XEM_EIR_RECV_FCS_ERROR_MASK    0x00020000UL	/* Receive FCS error */
-#define XEM_EIR_RECV_LEN_ERROR_MASK    0x00040000UL	/* Receive length field
-							 * error */
-#define XEM_EIR_RECV_SHORT_ERROR_MASK  0x00080000UL	/* Receive short frame
-							 * error */
-#define XEM_EIR_RECV_LONG_ERROR_MASK   0x00100000UL	/* Receive long frame
-							 * error */
-#define XEM_EIR_RECV_ALIGN_ERROR_MASK  0x00200000UL	/* Receive alignment
-							 * error */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************
-*
-* Low-level driver macros and functions. The list below provides signatures
-* to help the user use the macros.
-*
-* u32 XEmac_mReadReg(u32 BaseAddress, int RegOffset)
-* void XEmac_mWriteReg(u32 BaseAddress, int RegOffset, u32 Mask)
-*
-* void XEmac_mSetControlReg(u32 BaseAddress, u32 Mask)
-* void XEmac_mSetMacAddress(u32 BaseAddress, u8 *AddressPtr)
-*
-* void XEmac_mEnable(u32 BaseAddress)
-* void XEmac_mDisable(u32 BaseAddress)
-*
-* u32 XEmac_mIsTxDone(u32 BaseAddress)
-* u32 XEmac_mIsRxEmpty(u32 BaseAddress)
-*
-* void XEmac_SendFrame(u32 BaseAddress, u8 *FramePtr, int Size)
-* int XEmac_RecvFrame(u32 BaseAddress, u8 *FramePtr)
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*
-* Read the given register.
-*
-* @param    BaseAddress is the base address of the device
-* @param    RegOffset is the register offset to be read
-*
-* @return   The 32-bit value of the register
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mReadReg(BaseAddress, RegOffset) \
-		    XIo_In32((BaseAddress) + (RegOffset))
-
-/****************************************************************************/
-/**
-*
-* Write the given register.
-*
-* @param    BaseAddress is the base address of the device
-* @param    RegOffset is the register offset to be written
-* @param    Data is the 32-bit value to write to the register
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mWriteReg(BaseAddress, RegOffset, Data) \
-		    XIo_Out32((BaseAddress) + (RegOffset), (Data))
-
-/****************************************************************************/
-/**
-*
-* Set the contents of the control register. Use the XEM_ECR_* constants
-* defined above to create the bit-mask to be written to the register.
-*
-* @param    BaseAddress is the base address of the device
-* @param    Mask is the 16-bit value to write to the control register
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mSetControlReg(BaseAddress, Mask) \
-		    XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, (Mask))
-
-/****************************************************************************/
-/**
-*
-* Set the station address of the EMAC device.
-*
-* @param    BaseAddress is the base address of the device
-* @param    AddressPtr is a pointer to a 6-byte MAC address
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mSetMacAddress(BaseAddress, AddressPtr)		    \
-{								    \
-    u32 MacAddr;						\
-								    \
-    MacAddr = ((AddressPtr)[0] << 8) | (AddressPtr)[1];		    \
-    XIo_Out32((BaseAddress) + XEM_SAH_OFFSET, MacAddr);		    \
-								    \
-    MacAddr = ((AddressPtr)[2] << 24) | ((AddressPtr)[3] << 16) |   \
-	      ((AddressPtr)[4] << 8) | (AddressPtr)[5];		    \
-								    \
-    XIo_Out32((BaseAddress) + XEM_SAL_OFFSET, MacAddr);		    \
-}
-
-/****************************************************************************/
-/**
-*
-* Enable the transmitter and receiver. Preserve the contents of the control
-* register.
-*
-* @param    BaseAddress is the base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mEnable(BaseAddress) \
-{ \
-    u32 Control; \
-    Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
-    Control &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); \
-    Control |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); \
-    XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
-}
-
-/****************************************************************************/
-/**
-*
-* Disable the transmitter and receiver. Preserve the contents of the control
-* register.
-*
-* @param    BaseAddress is the base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mDisable(BaseAddress) \
-		XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, \
-		    XIo_In32((BaseAddress) + XEM_ECR_OFFSET) & \
-		    ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK))
-
-/****************************************************************************/
-/**
-*
-* Check to see if the transmission is complete.
-*
-* @param    BaseAddress is the base address of the device
-*
-* @return   TRUE if it is done, or FALSE if it is not.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mIsTxDone(BaseAddress) \
-	     (XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_XMIT_DONE_MASK)
-
-/****************************************************************************/
-/**
-*
-* Check to see if the receive FIFO is empty.
-*
-* @param    BaseAddress is the base address of the device
-*
-* @return   TRUE if it is empty, or FALSE if it is not.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mIsRxEmpty(BaseAddress) \
-	  (!(XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_RECV_DONE_MASK))
-
-/****************************************************************************/
-/**
-*
-* Reset MII compliant PHY
-*
-* @param    BaseAddress is the base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XEmac_mPhyReset(BaseAddress) \
-{ \
-    u32 Control;				    \
-    Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
-    Control &= ~XEM_ECR_PHY_ENABLE_MASK;		\
-    XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
-    Control |= XEM_ECR_PHY_ENABLE_MASK;			\
-    XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
-}
-
-/************************** Function Prototypes ******************************/
-
-void XEmac_SendFrame(u32 BaseAddress, u8 * FramePtr, int Size);
-int XEmac_RecvFrame(u32 BaseAddress, u8 * FramePtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_options.c b/board/xilinx/xilinx_enet/xemac_options.c
deleted file mode 100644
index 1f225f8f52..0000000000
--- a/board/xilinx/xilinx_enet/xemac_options.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_options.c
-*
-* Functions in this file handle configuration of the XEmac driver.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XEM_MAX_IFG         32	/* Maximum Interframe gap value */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-/************************** Variable Definitions *****************************/
-
-/*
- * A table of options and masks. This table maps the user-visible options with
- * the control register masks. It is used in Set/GetOptions as an alternative
- * to a series of if/else pairs. Note that the polled options does not have a
- * corresponding entry in the control register, so it does not exist in the
- * table.
- */
-typedef struct {
-	u32 Option;
-	u32 Mask;
-} OptionMap;
-
-static OptionMap OptionsTable[] = {
-	{XEM_UNICAST_OPTION, XEM_ECR_UNICAST_ENABLE_MASK},
-	{XEM_BROADCAST_OPTION, XEM_ECR_BROAD_ENABLE_MASK},
-	{XEM_PROMISC_OPTION, XEM_ECR_PROMISC_ENABLE_MASK},
-	{XEM_FDUPLEX_OPTION, XEM_ECR_FULL_DUPLEX_MASK},
-	{XEM_LOOPBACK_OPTION, XEM_ECR_LOOPBACK_MASK},
-	{XEM_MULTICAST_OPTION, XEM_ECR_MULTI_ENABLE_MASK},
-	{XEM_FLOW_CONTROL_OPTION, XEM_ECR_PAUSE_FRAME_MASK},
-	{XEM_INSERT_PAD_OPTION, XEM_ECR_XMIT_PAD_ENABLE_MASK},
-	{XEM_INSERT_FCS_OPTION, XEM_ECR_XMIT_FCS_ENABLE_MASK},
-	{XEM_INSERT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_INSERT_MASK},
-	{XEM_OVWRT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_OVWRT_MASK},
-	{XEM_STRIP_PAD_FCS_OPTION, XEM_ECR_RECV_STRIP_ENABLE_MASK}
-};
-
-#define XEM_NUM_OPTIONS     (sizeof(OptionsTable) / sizeof(OptionMap))
-
-/*****************************************************************************/
-/**
-*
-* Set Ethernet driver/device options.  The device must be stopped before
-* calling this function.  The options are contained within a bit-mask with each
-* bit representing an option (i.e., you can OR the options together). A one (1)
-* in the bit-mask turns an option on, and a zero (0) turns the option off.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param OptionsFlag is a bit-mask representing the Ethernet options to turn on
-*        or off. See xemac.h for a description of the available options.
-*
-* @return
-*
-* - XST_SUCCESS if the options were set successfully
-* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
-*
-* @note
-*
-* This function is not thread-safe and makes use of internal resources that are
-* shared between the Start, Stop, and SetOptions functions, so if one task
-* might be setting device options while another is trying to start the device,
-* protection of this shared data (typically using a semaphore) is required.
-*
-******************************************************************************/
-XStatus
-XEmac_SetOptions(XEmac * InstancePtr, u32 OptionsFlag)
-{
-	u32 ControlReg;
-	int Index;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-
-	/*
-	 * Loop through the options table, turning the option on or off
-	 * depending on whether the bit is set in the incoming options flag.
-	 */
-	for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
-		if (OptionsFlag & OptionsTable[Index].Option) {
-			ControlReg |= OptionsTable[Index].Mask;	/* turn it on */
-		} else {
-			ControlReg &= ~OptionsTable[Index].Mask;	/* turn it off */
-		}
-	}
-
-	/*
-	 * TODO: need to validate addr-overwrite only if addr-insert?
-	 */
-
-	/*
-	 * Now write the control register. Leave it to the upper layers
-	 * to restart the device.
-	 */
-	XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
-
-	/*
-	 * Check the polled option
-	 */
-	if (OptionsFlag & XEM_POLLED_OPTION) {
-		InstancePtr->IsPolled = TRUE;
-	} else {
-		InstancePtr->IsPolled = FALSE;
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get Ethernet driver/device options. The 32-bit value returned is a bit-mask
-* representing the options.  A one (1) in the bit-mask means the option is on,
-* and a zero (0) means the option is off.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-*
-* @return
-*
-* The 32-bit value of the Ethernet options. The value is a bit-mask
-* representing all options that are currently enabled. See xemac.h for a
-* description of the available options.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-u32
-XEmac_GetOptions(XEmac * InstancePtr)
-{
-	u32 OptionsFlag = 0;
-	u32 ControlReg;
-	int Index;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Get the control register to determine which options are currently set.
-	 */
-	ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
-
-	/*
-	 * Loop through the options table to determine which options are set
-	 */
-	for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
-		if (ControlReg & OptionsTable[Index].Mask) {
-			OptionsFlag |= OptionsTable[Index].Option;
-		}
-	}
-
-	if (InstancePtr->IsPolled) {
-		OptionsFlag |= XEM_POLLED_OPTION;
-	}
-
-	return OptionsFlag;
-}
-
-/*****************************************************************************/
-/**
-*
-* Set the Interframe Gap (IFG), which is the time the MAC delays between
-* transmitting frames.  There are two parts required.  The total interframe gap
-* is the total of the two parts.  The values provided for the Part1 and Part2
-* parameters are multiplied by 4 to obtain the bit-time interval. The first
-* part should be the first 2/3 of the total interframe gap. The MAC will reset
-* the interframe gap timer if carrier sense becomes true during the period
-* defined by interframe gap Part1. Part1 may be shorter than 2/3 the total and
-* can be as small as zero. The second part should be the last 1/3 of the total
-* interframe gap, but can be as large as the total interframe gap. The MAC
-* will not reset the interframe gap timer if carrier sense becomes true during
-* the period defined by interframe gap Part2.
-*
-* The device must be stopped before setting the interframe gap.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Part1 is the interframe gap part 1 (which will be multiplied by 4 to
-*        get the bit-time interval).
-* @param Part2 is the interframe gap part 2 (which will be multiplied by 4 to
-*        get the bit-time interval).
-*
-* @return
-*
-* - XST_SUCCESS if the interframe gap was set successfully
-* - XST_DEVICE_IS_STARTED if the device has not been stopped
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2)
-{
-	u32 Ifg;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(Part1 < XEM_MAX_IFG);
-	XASSERT_NONVOID(Part2 < XEM_MAX_IFG);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure device has been stopped
-	 */
-	if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STARTED;
-	}
-
-	Ifg = Part1 << XEM_IFGP_PART1_SHIFT;
-	Ifg |= (Part2 << XEM_IFGP_PART2_SHIFT);
-	XIo_Out32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET, Ifg);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Get the interframe gap, parts 1 and 2. See the description of interframe gap
-* above in XEmac_SetInterframeGap().
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param Part1Ptr is a pointer to an 8-bit buffer into which the interframe gap
-*        part 1 value will be copied.
-* @param Part2Ptr is a pointer to an 8-bit buffer into which the interframe gap
-*        part 2 value will be copied.
-*
-* @return
-*
-* None. The values of the interframe gap parts are copied into the
-* output parameters.
-*
-******************************************************************************/
-void
-XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr)
-{
-	u32 Ifg;
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(Part1Ptr != NULL);
-	XASSERT_VOID(Part2Ptr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	Ifg = XIo_In32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET);
-	*Part1Ptr = (Ifg & XEM_IFGP_PART1_MASK) >> XEM_IFGP_PART1_SHIFT;
-	*Part2Ptr = (Ifg & XEM_IFGP_PART2_MASK) >> XEM_IFGP_PART2_SHIFT;
-}
diff --git a/board/xilinx/xilinx_enet/xemac_polled.c b/board/xilinx/xilinx_enet/xemac_polled.c
deleted file mode 100644
index 23768bca79..0000000000
--- a/board/xilinx/xilinx_enet/xemac_polled.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xemac_polled.c
-*
-* Contains functions used when the driver is in polled mode. Use the
-* XEmac_SetOptions() function to put the driver into polled mode.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rpm  07/31/01 First release
-* 1.00b rpm  02/20/02 Repartitioned files and functions
-* 1.00c rpm  12/05/02 New version includes support for simple DMA
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xemac_i.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"	/* Uses v1.23b of the IPIF */
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Send an Ethernet frame in polled mode.  The device/driver must be in polled
-* mode before calling this function. The driver writes the frame directly to
-* the MAC's packet FIFO, then enters a loop checking the device status for
-* completion or error. Statistics are updated if an error occurs. The buffer
-* to be sent must be word-aligned.
-*
-* It is assumed that the upper layer software supplies a correctly formatted
-* Ethernet frame, including the destination and source addresses, the
-* type/length field, and the data field.  It is also assumed that upper layer
-* software does not append FCS at the end of the frame.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufPtr is a pointer to a word-aligned buffer containing the Ethernet
-*        frame to be sent.
-* @param ByteCount is the size of the Ethernet frame.
-*
-* @return
-*
-* - XST_SUCCESS if the frame was sent successfully
-* - XST_DEVICE_IS_STOPPED if the device has not yet been started
-* - XST_NOT_POLLED if the device is not in polled mode
-* - XST_FIFO_NO_ROOM if there is no room in the EMAC's length FIFO for this frame
-* - XST_FIFO_ERROR if the FIFO was overrun or underrun. This error is critical
-*   and requires the caller to reset the device.
-* - XST_EMAC_COLLISION if the send failed due to excess deferral or late
-*   collision
-*
-* @note
-*
-* There is the possibility that this function will not return if the hardware
-* is broken (i.e., it never sets the status bit indicating that transmission is
-* done). If this is of concern to the user, the user should provide protection
-* from this problem - perhaps by using a different timer thread to monitor the
-* PollSend thread. On a 10Mbps MAC, it takes about 1.21 msecs to transmit a
-* maximum size Ethernet frame (1518 bytes). On a 100Mbps MAC, it takes about
-* 121 usecs to transmit a maximum size Ethernet frame.
-*
-* @internal
-*
-* The EMAC uses FIFOs behind its length and status registers. For this reason,
-* it is important to keep the length, status, and data FIFOs in sync when
-* reading or writing to them.
-*
-******************************************************************************/
-XStatus
-XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount)
-{
-	u32 IntrStatus;
-	u32 XmitStatus;
-	XStatus Result;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufPtr != NULL);
-	XASSERT_NONVOID(ByteCount > XEM_HDR_SIZE);	/* send at least 1 byte */
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure the device is configured for polled mode and it is started
-	 */
-	if (!InstancePtr->IsPolled) {
-		return XST_NOT_POLLED;
-	}
-
-	if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STOPPED;
-	}
-
-	/*
-	 * Check for overruns and underruns for the transmit status and length
-	 * FIFOs and make sure the send packet FIFO is not deadlocked. Any of these
-	 * conditions is bad enough that we do not want to continue. The upper layer
-	 * software should reset the device to resolve the error.
-	 */
-	IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-
-	/*
-	 * Overrun errors
-	 */
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
-			  XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
-		InstancePtr->Stats.XmitOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	/*
-	 * Underrun errors
-	 */
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
-			  XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
-		InstancePtr->Stats.XmitUnderrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	/*
-	 * Before writing to the data FIFO, make sure the length FIFO is not
-	 * full.  The data FIFO might not be full yet even though the length FIFO
-	 * is. This avoids an overrun condition on the length FIFO and keeps the
-	 * FIFOs in sync.
-	 */
-	if (IntrStatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
-		/*
-		 * Clear the latched LFIFO_FULL bit so next time around the most
-		 * current status is represented
-		 */
-		XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
-				      XEM_EIR_XMIT_LFIFO_FULL_MASK);
-		return XST_FIFO_NO_ROOM;
-	}
-
-	/*
-	 * This is a non-blocking write. The packet FIFO returns an error if there
-	 * is not enough room in the FIFO for this frame.
-	 */
-	Result =
-	    XPacketFifoV100b_Write(&InstancePtr->SendFifo, BufPtr, ByteCount);
-	if (Result != XST_SUCCESS) {
-		return Result;
-	}
-
-	/*
-	 * Loop on the MAC's status to wait for any pause to complete.
-	 */
-	IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-
-	while ((IntrStatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
-		IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-		/*
-		   * Clear the pause status from the transmit status register
-		 */
-		XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
-				      IntrStatus & XEM_EIR_XMIT_PAUSE_MASK);
-	}
-
-	/*
-	 * Set the MAC's transmit packet length register to tell it to transmit
-	 */
-	XIo_Out32(InstancePtr->BaseAddress + XEM_TPLR_OFFSET, ByteCount);
-
-	/*
-	 * Loop on the MAC's status to wait for the transmit to complete. The
-	 * transmit status is in the FIFO when the XMIT_DONE bit is set.
-	 */
-	do {
-		IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-	}
-	while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0);
-
-	XmitStatus = XIo_In32(InstancePtr->BaseAddress + XEM_TSR_OFFSET);
-
-	InstancePtr->Stats.XmitFrames++;
-	InstancePtr->Stats.XmitBytes += ByteCount;
-
-	/*
-	 * Check for various errors, bump statistics, and return an error status.
-	 */
-
-	/*
-	 * Overrun errors
-	 */
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
-			  XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
-		InstancePtr->Stats.XmitOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	/*
-	 * Underrun errors
-	 */
-	if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
-			  XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
-		InstancePtr->Stats.XmitUnderrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	/*
-	 * Clear the interrupt status register of transmit statuses
-	 */
-	XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
-			      IntrStatus & XEM_EIR_XMIT_ALL_MASK);
-
-	/*
-	 * Collision errors are stored in the transmit status register
-	 * instead of the interrupt status register
-	 */
-	if (XmitStatus & XEM_TSR_EXCESS_DEFERRAL_MASK) {
-		InstancePtr->Stats.XmitExcessDeferral++;
-		return XST_EMAC_COLLISION_ERROR;
-	}
-
-	if (XmitStatus & XEM_TSR_LATE_COLLISION_MASK) {
-		InstancePtr->Stats.XmitLateCollisionErrors++;
-		return XST_EMAC_COLLISION_ERROR;
-	}
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/**
-*
-* Receive an Ethernet frame in polled mode. The device/driver must be in polled
-* mode before calling this function. The driver receives the frame directly
-* from the MAC's packet FIFO. This is a non-blocking receive, in that if there
-* is no frame ready to be received at the device, the function returns with an
-* error. The MAC's error status is not checked, so statistics are not updated
-* for polled receive. The buffer into which the frame will be received must be
-* word-aligned.
-*
-* @param InstancePtr is a pointer to the XEmac instance to be worked on.
-* @param BufPtr is a pointer to a word-aligned buffer into which the received
-*        Ethernet frame will be copied.
-* @param ByteCountPtr is both an input and an output parameter. It is a pointer
-*        to a 32-bit word that contains the size of the buffer on entry into the
-*        function and the size the received frame on return from the function.
-*
-* @return
-*
-* - XST_SUCCESS if the frame was sent successfully
-* - XST_DEVICE_IS_STOPPED if the device has not yet been started
-* - XST_NOT_POLLED if the device is not in polled mode
-* - XST_NO_DATA if there is no frame to be received from the FIFO
-* - XST_BUFFER_TOO_SMALL if the buffer to receive the frame is too small for
-*   the frame waiting in the FIFO.
-*
-* @note
-*
-* Input buffer must be big enough to hold the largest Ethernet frame. Buffer
-* must also be 32-bit aligned.
-*
-* @internal
-*
-* The EMAC uses FIFOs behind its length and status registers. For this reason,
-* it is important to keep the length, status, and data FIFOs in sync when
-* reading or writing to them.
-*
-******************************************************************************/
-XStatus
-XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr)
-{
-	XStatus Result;
-	u32 PktLength;
-	u32 IntrStatus;
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufPtr != NULL);
-	XASSERT_NONVOID(ByteCountPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/*
-	 * Be sure the device is configured for polled mode and it is started
-	 */
-	if (!InstancePtr->IsPolled) {
-		return XST_NOT_POLLED;
-	}
-
-	if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
-		return XST_DEVICE_IS_STOPPED;
-	}
-
-	/*
-	 * Make sure the buffer is big enough to hold the maximum frame size.
-	 * We need to do this because as soon as we read the MAC's packet length
-	 * register, which is actually a FIFO, we remove that length from the
-	 * FIFO.  We do not want to read the length FIFO without also reading the
-	 * data FIFO since this would get the FIFOs out of sync.  So we have to
-	 * make this restriction.
-	 */
-	if (*ByteCountPtr < XEM_MAX_FRAME_SIZE) {
-		return XST_BUFFER_TOO_SMALL;
-	}
-
-	/*
-	 * First check for packet FIFO deadlock and return an error if it has
-	 * occurred. A reset by the caller is necessary to correct this problem.
-	 */
-	if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
-		InstancePtr->Stats.FifoErrors++;
-		return XST_FIFO_ERROR;
-	}
-
-	/*
-	 * Get the interrupt status to know what happened (whether an error occurred
-	 * and/or whether frames have been received successfully). When clearing the
-	 * intr status register, clear only statuses that pertain to receive.
-	 */
-	IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
-	XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
-			      IntrStatus & XEM_EIR_RECV_ALL_MASK);
-
-	/*
-	 * Check receive errors and bump statistics so the caller will have a clue
-	 * as to why data may not have been received. We continue on if an error
-	 * occurred since there still may be frames that were received successfully.
-	 */
-	if (IntrStatus & (XEM_EIR_RECV_LFIFO_OVER_MASK |
-			  XEM_EIR_RECV_DFIFO_OVER_MASK)) {
-		InstancePtr->Stats.RecvOverrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-	}
-
-	if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
-		InstancePtr->Stats.RecvUnderrunErrors++;
-		InstancePtr->Stats.FifoErrors++;
-	}
-
-	/*
-	 * General receive errors
-	 */
-	if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
-		if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
-			InstancePtr->Stats.RecvMissedFrameErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RMFC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
-			InstancePtr->Stats.RecvCollisionErrors =
-			    XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
-			InstancePtr->Stats.RecvFcsErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RFCSEC_OFFSET);
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
-			InstancePtr->Stats.RecvLengthFieldErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
-			InstancePtr->Stats.RecvShortErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
-			InstancePtr->Stats.RecvLongErrors++;
-		}
-
-		if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
-			InstancePtr->Stats.RecvAlignmentErrors =
-			    XIo_In32(InstancePtr->BaseAddress +
-				     XEM_RAEC_OFFSET);
-		}
-	}
-
-	/*
-	 * Before reading from the length FIFO, make sure the length FIFO is not
-	 * empty. We could cause an underrun error if we try to read from an
-	 * empty FIFO.
-	 */
-	if ((IntrStatus & XEM_EIR_RECV_DONE_MASK) == 0) {
-		return XST_NO_DATA;
-	}
-
-	/*
-	 * Determine, from the MAC, the length of the next packet available
-	 * in the data FIFO (there should be a non-zero length here)
-	 */
-	PktLength = XIo_In32(InstancePtr->BaseAddress + XEM_RPLR_OFFSET);
-	if (PktLength == 0) {
-		return XST_NO_DATA;
-	}
-
-	/*
-	 * Write the RECV_DONE bit in the status register to clear it. This bit
-	 * indicates the RPLR is non-empty, and we know it's set at this point.
-	 * We clear it so that subsequent entry into this routine will reflect the
-	 * current status. This is done because the non-empty bit is latched in the
-	 * IPIF, which means it may indicate a non-empty condition even though
-	 * there is something in the FIFO.
-	 */
-	XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, XEM_EIR_RECV_DONE_MASK);
-
-	/*
-	 * We assume that the MAC never has a length bigger than the largest
-	 * Ethernet frame, so no need to make another check here.
-	 */
-
-	/*
-	 * This is a non-blocking read. The FIFO returns an error if there is
-	 * not at least the requested amount of data in the FIFO.
-	 */
-	Result =
-	    XPacketFifoV100b_Read(&InstancePtr->RecvFifo, BufPtr, PktLength);
-	if (Result != XST_SUCCESS) {
-		return Result;
-	}
-
-	InstancePtr->Stats.RecvFrames++;
-	InstancePtr->Stats.RecvBytes += PktLength;
-
-	*ByteCountPtr = PktLength;
-
-	return XST_SUCCESS;
-}
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
deleted file mode 100644
index 163fe1511d..0000000000
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ /dev/null
@@ -1,529 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <common.h>
-#include <environment.h>
-#include <net.h>
-#include "xparameters.h"
-
-#ifdef CFG_ENV_IS_IN_EEPROM
-#include <i2c.h>
-#include "xiic_l.h"
-
-#define IIC_DELAY     5000
-
-static u8 envStep = 0;		/* 0 means crc has not been read */
-const u8 hex[] = "0123456789ABCDEF"; /* lookup table for ML300 CRC */
-
-/************************************************************************
- * Use Xilinx provided driver to send data to EEPROM using iic bus.
- */
-static void
-send(u32 adr, u8 * data, u32 len)
-{
-	u8 sendBuf[34];		/* first 2-bit is address and others are data */
-	u32 pos, wlen;
-	u32 ret;
-
-	wlen = 32;
-	for (pos = 0; pos < len; pos += 32) {
-		if ((len - pos) < 32)
-			wlen = len - pos;
-
-		/* Put address and data bits together */
-		sendBuf[0] = (u8) ((adr + pos) >> 8);
-		sendBuf[1] = (u8) (adr + pos);
-		memcpy(&sendBuf[2], &data[pos], wlen);
-
-		/* Send to EEPROM through iic bus */
-		ret = XIic_Send(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1,
-				sendBuf, wlen + 2);
-
-		udelay(IIC_DELAY);
-	}
-}
-
-/************************************************************************
- * Use Xilinx provided driver to read data from EEPROM using the iic bus.
- */
-static void
-receive(u32 adr, u8 * data, u32 len)
-{
-	u8 address[2];
-	u32 ret;
-
-	address[0] = (u8) (adr >> 8);
-	address[1] = (u8) adr;
-
-	/* Provide EEPROM address */
-	ret =
-	    XIic_Send(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1, address,
-		      2);
-	/* Receive data from EEPROM */
-	ret =
-	    XIic_Recv(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1, data, len);
-}
-
-/************************************************************************
- * Convert a hexadecimal string to its equivalent integer value.
- */
-static u8
-axtoi(u8 * hexStg)
-{
-	u8 n;			/* position in string */
-	u8 m;			/* position in digit[] to shift */
-	u8 count;		/* loop index */
-	u8 intValue;		/* integer value of hex string */
-	u8 digit[2];		/* hold values to convert */
-
-	for (n = 0; n < 2; n++) {
-		if (hexStg[n] == '\0')
-			break;
-		if (hexStg[n] > 0x29 && hexStg[n] < 0x40)
-			digit[n] = hexStg[n] & 0x0f;
-		else if (hexStg[n] >= 'a' && hexStg[n] <= 'f')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else if (hexStg[n] >= 'A' && hexStg[n] <= 'F')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else
-			break;
-	}
-
-	intValue = 0;
-	count = n;
-	m = n - 1;
-	n = 0;
-	while (n < count) {
-		intValue = intValue | (digit[n] << (m << 2));
-		m--;		/* adjust the position to set */
-		n++;		/* next digit to process */
-	}
-
-	return (intValue);
-}
-
-/************************************************************************
- * Convert an integer string to its equivalent value.
- */
-static u8
-atoi(uchar * string)
-{
-	u8 res = 0;
-	while (*string >= '0' && *string <= '9') {
-		res *= 10;
-		res += *string - '0';
-		string++;
-	}
-
-	return res;
-}
-
-/************************************************************************
- * Key-value pairs are separated by "=" sign.
- */
-static void
-findKey(uchar * buffer, int *loc, u8 len)
-{
-	u32 i;
-
-	for (i = 0; i < len; i++)
-		if (buffer[i] == '=') {
-			*loc = i;
-			return;
-		}
-
-	/* return -1 is no "=" sign found */
-	*loc = -1;
-}
-
-/************************************************************************
- * Compute a new ML300 CRC when user calls the saveenv command.
- * Also update EEPROM with new CRC value.
- */
-static u8
-update_crc(u32 len, uchar * data)
-{
-	uchar temp[6] = { 'C', '=', 0x00, 0x00, 0x00, 0x00 };
-	u32 crc;		/* new crc value */
-	u32 i;
-
-	crc = 0;
-
-	/* calculate new CRC */
-	for (i = 0; i < len; i++)
-		crc += data[i];
-
-	/* CRC includes key for check sum */
-	crc += 'C' + '=';
-
-	/* compose new CRC to be updated */
-	temp[2] = hex[(crc >> 4) & 0xf];
-	temp[3] = hex[crc & 0xf];
-
-	/* check to see if env size exceeded */
-	if (len + 6 > ENV_SIZE) {
-		printf("ERROR: not enough space to store CRC on EEPROM");
-		return 1;
-	}
-
-	memcpy(data + len, temp, 6);
-	return 0;
-}
-
-/************************************************************************
- * Read out ML300 CRC and compare it with a runtime calculated ML300 CRC.
- * If equal, then pass back a u-boot CRC value, otherwise pass back
- * junk to indicate CRC error.
-*/
-static void
-read_crc(uchar * buffer, int len)
-{
-	u32 addr, n;
-	u32 crc;		/* runtime crc */
-	u8 old[2] = { 0xff, 0xff };	/* current CRC in EEPROM */
-	u8 stop;		/* indication of end of env data */
-	u8 pre;			/* previous EEPROM data bit */
-	int i, loc;
-
-	addr = CFG_ENV_OFFSET;	/* start from first env address */
-	n = 0;
-	pre = 1;
-	stop = 1;
-	crc = 0;
-
-	/* calculate runtime CRC according to ML300 and read back
-	   old CRC stored in the EEPROM */
-	while (n < CFG_ENV_SIZE) {
-		receive(addr, buffer, len);
-
-		/* found two null chars, end of env */
-		if ((pre || buffer[0]) == 0)
-			break;
-
-		findKey(buffer, &loc, len);
-
-		/* found old check sum, read and store old CRC */
-		if ((loc == 0 && pre == 'C')
-		    || (loc > 0 && buffer[loc - 1] == 'C'))
-			receive(addr + loc + 1, old, 2);
-
-		pre = buffer[len - 1];
-
-		/* calculate runtime ML300 CRC */
-		crc += buffer[0];
-		i = 1;
-		do {
-			crc += buffer[i];
-			stop = buffer[i] || buffer[i - 1];
-			i++;
-		} while (stop && (i < len));
-
-		if (stop == 0)
-			break;
-
-		n += len;
-		addr += len;
-	}
-
-	/* exclude old CRC from runtime calculation */
-	crc -= (old[0] + old[1]);
-
-	/* match CRC values, send back u-boot CRC */
-	if ((old[0] == hex[(crc >> 4) & 0xf])
-	    && (old[1] == hex[crc & 0xf])) {
-		crc = 0;
-		n = 0;
-		addr =
-		    CFG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
-								     data);
-		/* calculate u-boot crc */
-		while (n < ENV_SIZE) {
-			receive(addr, buffer, len);
-			crc = crc32(crc, buffer, len);
-			n += len;
-			addr += len;
-		}
-
-		memcpy(buffer, &crc, 4);
-	}
-}
-
-/************************************************************************
- * Convert IP address to hexadecimals.
- */
-static void
-ip_ml300(uchar * s, uchar * res)
-{
-	char temp[2];
-	u8 i;
-
-	res[0] = 0x00;
-
-	for (i = 0; i < 4; i++) {
-		sprintf(temp, "%02x", atoi(s));
-		s = (uchar *)strchr((char *)s, '.') + 1;
-		strcat((char *)res, temp);
-	}
-}
-
-/************************************************************************
- * Change 0xff (255), a dummy null char to 0x00.
- */
-static void
-change_null(uchar * s)
-{
-	if (s != NULL) {
-		change_null((uchar *)strchr((char *)s + 1, 255));
-		*(strchr((char *)s, 255)) = '\0';
-	}
-}
-
-/************************************************************************
- * Update environment variable name and values to u-boot standard.
- */
-void
-convert_env(void)
-{
-	char *s;		/* pointer to env value */
-	char temp[20];		/* temp storage for addresses */
-
-	/* E -> ethaddr */
-	s = getenv("E");
-	if (s != NULL) {
-		sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
-			s[0], s[1],  s[ 2], s[ 3],
-			s[4], s[5],  s[ 6], s[ 7],
-			s[8], s[9],  s[10], s[11] );
-		setenv("ethaddr", temp);
-		setenv("E", NULL);
-	}
-
-	/* L -> serial# */
-	s = getenv("L");
-	if (s != NULL) {
-		setenv("serial#", s);
-		setenv("L", NULL);
-	}
-
-	/* I -> ipaddr */
-	s = getenv("I");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("ipaddr", temp);
-		setenv("I", NULL);
-	}
-
-	/* S -> serverip */
-	s = getenv("S");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("serverip", temp);
-		setenv("S", NULL);
-	}
-
-	/* A -> bootargs */
-	s = getenv("A");
-	if (s != NULL) {
-		setenv("bootargs", s);
-		setenv("A", NULL);
-	}
-
-	/* F -> bootfile */
-	s = getenv("F");
-	if (s != NULL) {
-		setenv("bootfile", s);
-		setenv("F", NULL);
-	}
-
-	/* M -> bootcmd */
-	s = getenv("M");
-	if (s != NULL) {
-		setenv("bootcmd", s);
-		setenv("M", NULL);
-	}
-
-	/* Don't include C (CRC) */
-	setenv("C", NULL);
-}
-
-/************************************************************************
- * Save user modified environment values back to EEPROM.
- */
-static void
-save_env(void)
-{
-	char eprom[ENV_SIZE];	/* buffer to be written back to EEPROM */
-	char *s, temp[20];
-	char ff[] = { 0xff, 0x00 };	/* dummy null value */
-	u32 len;		/* length of env to be written to EEPROM */
-
-	eprom[0] = 0x00;
-
-	/* ethaddr -> E */
-	s = getenv("ethaddr");
-	if (s != NULL) {
-		strcat(eprom, "E=");
-		sprintf(temp, "%c%c%c%c%c%c%c%c%c%c%c%c",
-			*s, *(s + 1), *(s + 3), *(s + 4), *(s + 6), *(s + 7),
-			*(s + 9), *(s + 10), *(s + 12), *(s + 13), *(s + 15),
-			*(s + 16));
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serial# -> L */
-	s = getenv("serial#");
-	if (s != NULL) {
-		strcat(eprom, "L=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* ipaddr -> I */
-	s = getenv("ipaddr");
-	if (s != NULL) {
-		strcat(eprom, "I=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serverip -> S */
-	s = getenv("serverip");
-	if (s != NULL) {
-		strcat(eprom, "S=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* bootargs -> A */
-	s = getenv("bootargs");
-	if (s != NULL) {
-		strcat(eprom, "A=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootfile -> F */
-	s = getenv("bootfile");
-	if (s != NULL) {
-		strcat(eprom, "F=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootcmd -> M */
-	s = getenv("bootcmd");
-	if (s != NULL) {
-		strcat(eprom, "M=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	len = strlen(eprom);	/* find env length without crc */
-	change_null((uchar *)eprom);	/* change 0xff to 0x00 */
-
-	/* update EEPROM env values if there is enough space */
-	if (update_crc(len, (uchar *)eprom) == 0)
-		send(CFG_ENV_OFFSET, (uchar *)eprom, len + 6);
-}
-
-/************************************************************************
- * U-boot call for EEPROM read associated activities.
- */
-int
-i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-
-	if (envStep == 0) {
-		/* first read call is for crc */
-		read_crc(buffer, len);
-		++envStep;
-		return 0;
-	} else if (envStep == 1) {
-		/* then read out EEPROM content for runtime u-boot CRC calculation */
-		receive(addr, buffer, len);
-
-		if (addr + len - CFG_ENV_OFFSET == CFG_ENV_SIZE)
-			/* end of runtime crc read */
-			++envStep;
-		return 0;
-	}
-
-	if (len < 2) {
-		/* when call getenv_r */
-		receive(addr, buffer, len);
-	} else if (addr + len < CFG_ENV_OFFSET + CFG_ENV_SIZE) {
-		/* calling env_relocate(), but don't read out
-		   crc value from EEPROM */
-		receive(addr, buffer + 4, len);
-	} else {
-		receive(addr, buffer + 4, len - 4);
-	}
-
-	return 0;
-
-}
-
-/************************************************************************
- * U-boot call for EEPROM write acativities.
- */
-int
-i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	/* save env on last page write called by u-boot */
-	if (addr + len >= CFG_ENV_OFFSET + CFG_ENV_SIZE)
-		save_env();
-
-	return 0;
-}
-
-/************************************************************************
- * Dummy function.
- */
-int
-i2c_probe(uchar chip)
-{
-	return 1;
-}
-
-#endif
diff --git a/board/xilinx/xilinx_iic/xiic_l.c b/board/xilinx/xilinx_iic/xiic_l.c
deleted file mode 100644
index 6b7816373e..0000000000
--- a/board/xilinx/xilinx_iic/xiic_l.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/* $Id: xiic_l.c,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/******************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xiic_l.c
-*
-* This file contains low-level driver functions that can be used to access the
-* device.  The user should refer to the hardware device specification for more
-* details of the device operation.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- --- -------  -----------------------------------------------
-* 1.01b jhl 5/13/02  First release
-* 1.01b jhl 10/14/02 Corrected bug in the receive function, the setup of the
-*		     interrupt status mask was not being done in the loop such
-*		     that a read would sometimes fail on the last byte because
-*		     the transmit error which should have been ignored was
-*		     being used.  This would leave an extra byte in the FIFO
-*		     and the bus throttled such that the next operation would
-*		     also fail.	 Also updated the receive function to not
-*		     disable the device after the last byte until after the
-*		     bus transitions to not busy which is more consistent
-*		     with the expected behavior.
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-****************************************************************************/
-
-/***************************** Include Files *******************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"
-#include "xiic_l.h"
-
-/************************** Constant Definitions ***************************/
-
-/**************************** Type Definitions *****************************/
-
-
-/***************** Macros (Inline Functions) Definitions *******************/
-
-
-/******************************************************************************
-*
-* This macro clears the specified interrupt in the IPIF interrupt status
-* register.  It is non-destructive in that the register is read and only the
-* interrupt specified is cleared.  Clearing an interrupt acknowledges it.
-*
-* @param    BaseAddress contains the IPIF registers base address.
-*
-* @param    InterruptMask contains the interrupts to be disabled
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mClearIisr(u32 BaseAddress,
-*				  u32 InterruptMask);
-*
-******************************************************************************/
-#define XIic_mClearIisr(BaseAddress, InterruptMask)		    \
-    XIIF_V123B_WRITE_IISR((BaseAddress),			    \
-	XIIF_V123B_READ_IISR(BaseAddress) & (InterruptMask))
-
-/******************************************************************************
-*
-* This macro sends the address for a 7 bit address during both read and write
-* operations. It takes care of the details to format the address correctly.
-* This macro is designed to be called internally to the drivers.
-*
-* @param    SlaveAddress contains the address of the slave to send to.
-*
-* @param    Operation indicates XIIC_READ_OPERATION or XIIC_WRITE_OPERATION
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mSend7BitAddr(u16 SlaveAddress, u8 Operation);
-*
-******************************************************************************/
-#define XIic_mSend7BitAddress(BaseAddress, SlaveAddress, Operation)	    \
-{									    \
-    u8 LocalAddr = (u8)(SlaveAddress << 1);			    \
-    LocalAddr = (LocalAddr & 0xFE) | (Operation);			    \
-    XIo_Out8(BaseAddress + XIIC_DTR_REG_OFFSET, LocalAddr);		    \
-}
-
-/************************** Function Prototypes ****************************/
-
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr,
-			  unsigned ByteCount);
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr,
-			  unsigned ByteCount);
-
-/************************** Variable Definitions **************************/
-
-
-/****************************************************************************/
-/**
-* Receive data as a master on the IIC bus.  This function receives the data
-* using polled I/O and blocks until the data has been received.	 It only
-* supports 7 bit addressing and non-repeated start modes of operation.	The
-* user is responsible for ensuring the bus is not busy if multiple masters
-* are present on the bus.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    Address contains the 7 bit IIC address of the device to send the
-*	    specified data to.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes received.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Recv (u32 BaseAddress, u8 Address,
-		    u8 * BufferPtr, unsigned ByteCount)
-{
-	u8 CntlReg;
-	unsigned RemainingByteCount;
-
-	/* Tx error is enabled incase the address (7 or 10) has no device to answer
-	 * with Ack. When only one byte of data, must set NO ACK before address goes
-	 * out therefore Tx error must not be enabled as it will go off immediately
-	 * and the Rx full interrupt will be checked.  If full, then the one byte
-	 * was received and the Tx error will be disabled without sending an error
-	 * callback msg.
-	 */
-	XIic_mClearIisr (BaseAddress,
-			 XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK |
-			 XIIC_INTR_ARB_LOST_MASK);
-
-	/* Set receive FIFO occupancy depth for 1 byte (zero based)
-	 */
-	XIo_Out8 (BaseAddress + XIIC_RFD_REG_OFFSET, 0);
-
-	/* 7 bit slave address, send the address for a read operation
-	 * and set the state to indicate the address has been sent
-	 */
-	XIic_mSend7BitAddress (BaseAddress, Address, XIIC_READ_OPERATION);
-
-	/* MSMS gets set after putting data in FIFO. Start the master receive
-	 * operation by setting CR Bits MSMS to Master, if the buffer is only one
-	 * byte, then it should not be acknowledged to indicate the end of data
-	 */
-	CntlReg = XIIC_CR_MSMS_MASK | XIIC_CR_ENABLE_DEVICE_MASK;
-	if (ByteCount == 1) {
-		CntlReg |= XIIC_CR_NO_ACK_MASK;
-	}
-
-	/* Write out the control register to start receiving data and call the
-	 * function to receive each byte into the buffer
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, CntlReg);
-
-	/* Clear the latched interrupt status for the bus not busy bit which must
-	 * be done while the bus is busy
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
-	/* Try to receive the data from the IIC bus */
-
-	RemainingByteCount = RecvData (BaseAddress, BufferPtr, ByteCount);
-	/*
-	 * The receive is complete, disable the IIC device and return the number of
-	 * bytes that was received
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
-	/* Return the number of bytes that was received */
-
-	return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Receive the specified data from the device that has been previously addressed
-* on the IIC bus.  This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    BufferPtr points to the buffer to hold the data that is received.
-* @param    ByteCount is the number of bytes to be received.
-*
-* @return
-*
-* The number of bytes remaining to be received.
-*
-* @note
-*
-* This function does not take advantage of the receive FIFO because it is
-* designed for minimal code space and complexity.  It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-* This function assumes that the calling function will disable the IIC device
-* after this function returns.
-*
-******************************************************************************/
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
-	u8 CntlReg;
-	u32 IntrStatusMask;
-	u32 IntrStatus;
-
-	/* Attempt to receive the specified number of bytes on the IIC bus */
-
-	while (ByteCount > 0) {
-		/* Setup the mask to use for checking errors because when receiving one
-		 * byte OR the last byte of a multibyte message an error naturally
-		 * occurs when the no ack is done to tell the slave the last byte
-		 */
-		if (ByteCount == 1) {
-			IntrStatusMask =
-				XIIC_INTR_ARB_LOST_MASK | XIIC_INTR_BNB_MASK;
-		} else {
-			IntrStatusMask =
-				XIIC_INTR_ARB_LOST_MASK |
-				XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_BNB_MASK;
-		}
-
-		/* Wait for the previous transmit and the 1st receive to complete
-		 * by checking the interrupt status register of the IPIF
-		 */
-		while (1) {
-			IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-			if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
-				break;
-			}
-			/* Check the transmit error after the receive full because when
-			 * sending only one byte transmit error will occur because of the
-			 * no ack to indicate the end of the data
-			 */
-			if (IntrStatus & IntrStatusMask) {
-				return ByteCount;
-			}
-		}
-
-		CntlReg = XIo_In8 (BaseAddress + XIIC_CR_REG_OFFSET);
-
-		/* Special conditions exist for the last two bytes so check for them
-		 * Note that the control register must be setup for these conditions
-		 * before the data byte which was already received is read from the
-		 * receive FIFO (while the bus is throttled
-		 */
-		if (ByteCount == 1) {
-			/* For the last data byte, it has already been read and no ack
-			 * has been done, so clear MSMS while leaving the device enabled
-			 * so it can get off the IIC bus appropriately with a stop.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  XIIC_CR_ENABLE_DEVICE_MASK);
-		}
-
-		/* Before the last byte is received, set NOACK to tell the slave IIC
-		 * device that it is the end, this must be done before reading the byte
-		 * from the FIFO
-		 */
-		if (ByteCount == 2) {
-			/* Write control reg with NO ACK allowing last byte to
-			 * have the No ack set to indicate to slave last byte read.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  CntlReg | XIIC_CR_NO_ACK_MASK);
-		}
-
-		/* Read in data from the FIFO and unthrottle the bus such that the
-		 * next byte is read from the IIC bus
-		 */
-		*BufferPtr++ = XIo_In8 (BaseAddress + XIIC_DRR_REG_OFFSET);
-
-		/* Clear the latched interrupt status so that it will be updated with
-		 * the new state when it changes, this must be done after the receive
-		 * register is read
-		 */
-		XIic_mClearIisr (BaseAddress, XIIC_INTR_RX_FULL_MASK |
-				 XIIC_INTR_TX_ERROR_MASK |
-				 XIIC_INTR_ARB_LOST_MASK);
-		ByteCount--;
-	}
-
-	/* Wait for the bus to transition to not busy before returning, the IIC
-	 * device cannot be disabled until this occurs.	 It should transition as
-	 * the MSMS bit of the control register was cleared before the last byte
-	 * was read from the FIFO.
-	 */
-	while (1) {
-		if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
-			break;
-		}
-	}
-
-	return ByteCount;
-}
-
-/****************************************************************************/
-/**
-* Send data as a master on the IIC bus.	 This function sends the data
-* using polled I/O and blocks until the data has been sent.  It only supports
-* 7 bit addressing and non-repeated start modes of operation.  The user is
-* responsible for ensuring the bus is not busy if multiple masters are present
-* on the bus.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    Address contains the 7 bit IIC address of the device to send the
-*	    specified data to.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes sent.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Send (u32 BaseAddress, u8 Address,
-		    u8 * BufferPtr, unsigned ByteCount)
-{
-	unsigned RemainingByteCount;
-
-	/* Put the address into the FIFO to be sent and indicate that the operation
-	 * to be performed on the bus is a write operation
-	 */
-	XIic_mSend7BitAddress (BaseAddress, Address, XIIC_WRITE_OPERATION);
-
-	/* Clear the latched interrupt status so that it will be updated with the
-	 * new state when it changes, this must be done after the address is put
-	 * in the FIFO
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK |
-			 XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_ARB_LOST_MASK);
-
-	/* MSMS must be set after putting data into transmit FIFO, indicate the
-	 * direction is transmit, this device is master and enable the IIC device
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-		  XIIC_CR_MSMS_MASK | XIIC_CR_DIR_IS_TX_MASK |
-		  XIIC_CR_ENABLE_DEVICE_MASK);
-
-	/* Clear the latched interrupt
-	 * status for the bus not busy bit which must be done while the bus is busy
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
-	/* Send the specified data to the device on the IIC bus specified by the
-	 * the address
-	 */
-	RemainingByteCount = SendData (BaseAddress, BufferPtr, ByteCount);
-
-	/*
-	 * The send is complete, disable the IIC device and return the number of
-	 * bytes that was sent
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
-	return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Send the specified buffer to the device that has been previously addressed
-* on the IIC bus.  This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes remaining to be sent.
-*
-* @note
-*
-* This function does not take advantage of the transmit FIFO because it is
-* designed for minimal code space and complexity.  It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-******************************************************************************/
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
-	u32 IntrStatus;
-
-	/* Send the specified number of bytes in the specified buffer by polling
-	 * the device registers and blocking until complete
-	 */
-	while (ByteCount > 0) {
-		/* Wait for the transmit to be empty before sending any more data
-		 * by polling the interrupt status register
-		 */
-		while (1) {
-			IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-
-			if (IntrStatus & (XIIC_INTR_TX_ERROR_MASK |
-					  XIIC_INTR_ARB_LOST_MASK |
-					  XIIC_INTR_BNB_MASK)) {
-				return ByteCount;
-			}
-
-			if (IntrStatus & XIIC_INTR_TX_EMPTY_MASK) {
-				break;
-			}
-		}
-		/* If there is more than one byte to send then put the next byte to send
-		 * into the transmit FIFO
-		 */
-		if (ByteCount > 1) {
-			XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
-				  *BufferPtr++);
-		} else {
-			/* Set the stop condition before sending the last byte of data so that
-			 * the stop condition will be generated immediately following the data
-			 * This is done by clearing the MSMS bit in the control register.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  XIIC_CR_ENABLE_DEVICE_MASK |
-				  XIIC_CR_DIR_IS_TX_MASK);
-
-			/* Put the last byte to send in the transmit FIFO */
-
-			XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
-				  *BufferPtr++);
-		}
-
-		/* Clear the latched interrupt status register and this must be done after
-		 * the transmit FIFO has been written to or it won't clear
-		 */
-		XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK);
-
-		/* Update the byte count to reflect the byte sent and clear the latched
-		 * interrupt status so it will be updated for the new state
-		 */
-		ByteCount--;
-	}
-
-	/* Wait for the bus to transition to not busy before returning, the IIC
-	 * device cannot be disabled until this occurs.
-	 * Note that this is different from a receive operation because the stop
-	 * condition causes the bus to go not busy.
-	 */
-	while (1) {
-		if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
-			break;
-		}
-	}
-
-	return ByteCount;
-}
diff --git a/board/xilinx/xilinx_iic/xiic_l.h b/board/xilinx/xilinx_iic/xiic_l.h
deleted file mode 100644
index a2c4c496a9..0000000000
--- a/board/xilinx/xilinx_iic/xiic_l.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/*****************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xiic_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device.  High-level driver functions
-* are defined in xiic.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b jhl  05/07/02 First release
-* 1.01c ecm  12/05/02 new rev
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XIIC_L_H /* prevent circular inclusions */
-#define XIIC_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions ****************************/
-
-#define XIIC_MSB_OFFSET		       3
-
-#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET
-
-/*
- * Register offsets in bytes from RegisterBase. Three is added to the
- * base offset to access LSB (IBM style) of the word
- */
-#define XIIC_CR_REG_OFFSET   0x00+XIIC_REG_OFFSET   /* Control Register	  */
-#define XIIC_SR_REG_OFFSET   0x04+XIIC_REG_OFFSET   /* Status Register	  */
-#define XIIC_DTR_REG_OFFSET  0x08+XIIC_REG_OFFSET   /* Data Tx Register	  */
-#define XIIC_DRR_REG_OFFSET  0x0C+XIIC_REG_OFFSET   /* Data Rx Register	  */
-#define XIIC_ADR_REG_OFFSET  0x10+XIIC_REG_OFFSET   /* Address Register	  */
-#define XIIC_TFO_REG_OFFSET  0x14+XIIC_REG_OFFSET   /* Tx FIFO Occupancy  */
-#define XIIC_RFO_REG_OFFSET  0x18+XIIC_REG_OFFSET   /* Rx FIFO Occupancy  */
-#define XIIC_TBA_REG_OFFSET  0x1C+XIIC_REG_OFFSET   /* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET  0x20+XIIC_REG_OFFSET   /* Rx FIFO Depth reg  */
-
-/* Control Register masks */
-
-#define XIIC_CR_ENABLE_DEVICE_MASK	  0x01	/* Device enable = 1	  */
-#define XIIC_CR_TX_FIFO_RESET_MASK	  0x02	/* Transmit FIFO reset=1  */
-#define XIIC_CR_MSMS_MASK		  0x04	/* Master starts Txing=1  */
-#define XIIC_CR_DIR_IS_TX_MASK		  0x08	/* Dir of tx. Txing=1	  */
-#define XIIC_CR_NO_ACK_MASK		  0x10	/* Tx Ack. NO ack = 1	  */
-#define XIIC_CR_REPEATED_START_MASK	  0x20	/* Repeated start = 1	  */
-#define XIIC_CR_GENERAL_CALL_MASK	  0x40	/* Gen Call enabled = 1	  */
-
-/* Status Register masks */
-
-#define XIIC_SR_GEN_CALL_MASK		  0x01	/* 1=a mstr issued a GC	  */
-#define XIIC_SR_ADDR_AS_SLAVE_MASK	  0x02	/* 1=when addr as slave	  */
-#define XIIC_SR_BUS_BUSY_MASK		  0x04	/* 1 = bus is busy	  */
-#define XIIC_SR_MSTR_RDING_SLAVE_MASK	  0x08	/* 1=Dir: mstr <-- slave  */
-#define XIIC_SR_TX_FIFO_FULL_MASK	  0x10	/* 1 = Tx FIFO full	  */
-#define XIIC_SR_RX_FIFO_FULL_MASK	  0x20	/* 1 = Rx FIFO full	  */
-#define XIIC_SR_RX_FIFO_EMPTY_MASK	  0x40	/* 1 = Rx FIFO empty	  */
-
-/* IPIF Interrupt Status Register masks	   Interrupt occurs when...	  */
-
-#define XIIC_INTR_ARB_LOST_MASK		  0x01	/* 1 = arbitration lost	  */
-#define XIIC_INTR_TX_ERROR_MASK		  0x02	/* 1=Tx error/msg complete*/
-#define XIIC_INTR_TX_EMPTY_MASK		  0x04	/* 1 = Tx FIFO/reg empty  */
-#define XIIC_INTR_RX_FULL_MASK		  0x08	/* 1=Rx FIFO/reg=OCY level*/
-#define XIIC_INTR_BNB_MASK		  0x10	/* 1 = Bus not busy	  */
-#define XIIC_INTR_AAS_MASK		  0x20	/* 1 = when addr as slave */
-#define XIIC_INTR_NAAS_MASK		  0x40	/* 1 = not addr as slave  */
-#define XIIC_INTR_TX_HALF_MASK		  0x80	/* 1 = TX FIFO half empty */
-
-/* IPIF Device Interrupt Register masks */
-
-#define XIIC_IPIF_IIC_MASK	    0x00000004UL    /* 1=inter enabled */
-#define XIIC_IPIF_ERROR_MASK	    0x00000001UL    /* 1=inter enabled */
-#define XIIC_IPIF_INTER_ENABLE_MASK  (XIIC_IPIF_IIC_MASK |  \
-				      XIIC_IPIF_ERROR_MASK)
-
-#define XIIC_TX_ADDR_SENT	      0x00
-#define XIIC_TX_ADDR_MSTR_RECV_MASK   0x02
-
-/* The following constants specify the depth of the FIFOs */
-
-#define IIC_RX_FIFO_DEPTH	  16   /* Rx fifo capacity		 */
-#define IIC_TX_FIFO_DEPTH	  16   /* Tx fifo capacity		 */
-
-/* The following constants specify groups of interrupts that are typically
- * enabled or disables at the same time
- */
-#define XIIC_TX_INTERRUPTS					    \
-	    (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK |    \
-	     XIIC_INTR_TX_HALF_MASK)
-
-#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
-
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION  1
-#define XIIC_WRITE_OPERATION 0
-
-/* The following constants are used with the transmit FIFO fill function to
- * specify the role which the IIC device is acting as, a master or a slave.
- */
-#define XIIC_MASTER_ROLE     1
-#define XIIC_SLAVE_ROLE	     0
-
-/**************************** Type Definitions ******************************/
-
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-
-/************************** Function Prototypes *****************************/
-
-unsigned XIic_Recv(u32 BaseAddress, u8 Address,
-		   u8 *BufferPtr, unsigned ByteCount);
-
-unsigned XIic_Send(u32 BaseAddress, u8 Address,
-		   u8 *BufferPtr, unsigned ByteCount);
-
-#endif		  /* end of protection macro */
diff --git a/board/zpc1900/Makefile b/board/zpc1900/Makefile
deleted file mode 100644
index be7e213a9b..0000000000
--- a/board/zpc1900/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/zpc1900/config.mk b/board/zpc1900/config.mk
deleted file mode 100644
index 3e53b2be05..0000000000
--- a/board/zpc1900/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# ZPC.1900 board
-#
-
-TEXT_BASE = 0xFE000000
diff --git a/board/zpc1900/u-boot.lds b/board/zpc1900/u-boot.lds
deleted file mode 100644
index 18c4b46f47..0000000000
--- a/board/zpc1900/u-boot.lds
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc8260/start.o	(.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/board/zpc1900/zpc1900.c b/board/zpc1900/zpc1900.c
deleted file mode 100644
index 7db535e8a4..0000000000
--- a/board/zpc1900/zpc1900.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <miiphy.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB  */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB  */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC  */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* SMC2 TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* SMC2 RXD */
-	/* PA7  */ {   0,   0,   0,   0,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   0,   0,   0,   0,   0   }, /* PA6 */
-	/* PA5  */ {   0,   0,   0,   0,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   0,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   0,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   0,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   0,   0,   0   }, /* PA1 */
-	/* PA0  */ {   0,   0,   0,   0,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER  */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV  */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN  */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER  */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL    */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS    */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN  */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   0,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   0,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN CLSN */
-	/* PC28 */ {   0,   0,   0,   0,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   0,   0,   0   }, /* PC27 */
-	/* PC26 */ {   0,   0,   0,   0,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   0,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   0,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC21 */ {   0,   0,   0,   0,   0,   0   }, /* PC21 */
-	/* PC20 */ {   0,   0,   0,   0,   0,   0   }, /* PC20 */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII Rx Clock (CLK13) */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   0,   0,   0,   0,   0   }, /* PC16 */
-	/* PC15 */ {   0,   0,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RENA */
-	/* PC13 */ {   0,   0,   0,   0,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   0,   0,   0,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   0,   0,   0   }, /* PC11 */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* LXT972 MDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* LXT972 MDIO */
-	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   0,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   0,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   0,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   0,   0,   0   }, /* PC2 */
-	/* PC1  */ {   0,   0,   0,   0,   0,   0   }, /* PC1 */
-	/* PC0  */ {   0,   0,   0,   0,   0,   0   }, /* PC0 */
-    },
-
-    /* Port D */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD  */
-	/* PD30 */ {   0,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD  */
-	/* PD29 */ {   0,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   0,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   0,   0,   0,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   0,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   0,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   0,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   0,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   0,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   0,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   0,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   0,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   0,   0,   0   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   0,   0,   0   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   0,   0,   0   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   0,   0,   0   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
-void *nvram_read(void *dest, long src, size_t count)
-{
-	return memcpy(dest, (const void *)src, count);
-}
-
-void nvram_write(long dest, const void *src, size_t count)
-{
-	vu_char     *p1 = (vu_char *)(CFG_EEPROM + 0x1555);
-	vu_char     *p2 = (vu_char *)(CFG_EEPROM + 0x0AAA);
-	vu_char     *d = (vu_char *)dest;
-	const uchar *s = (const uchar *)src;
-
-	/* Unprotect the EEPROM */
-	*p1 = 0xAA;
-	*p2 = 0x55;
-	*p1 = 0x80;
-	*p1 = 0xAA;
-	*p2 = 0x55;
-	*p1 = 0x20;
-	udelay(10000);
-
-	/* Write the data to the EEPROM */
-	while (count--) {
-		*d++ = *s++;
-		while (*(d - 1) != *(s - 1))
-			/* wait */;
-	}
-
-	/* Protect the EEPROM */
-	*p1 = 0xAA;
-	*p2 = 0x55;
-	*p1 = 0xA0;
-	udelay(10000);
-}
-#endif /* CFG_NVRAM_ACCESS_ROUTINE */
-
-long int initdram(int board_type)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr;
-	uchar c = 0xFF;
-	long int msize = CFG_SDRAM_SIZE;
-	int i;
-
-	if (bcsr[4] & BCSR_PCI_MODE) { /* PCI mode selected by JP9 */
-		immap->im_clkrst.car_sccr |= SCCR_PCI_MODE;
-		immap->im_siu_conf.sc_siumcr =
-			(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
-			| SIUMCR_LBPC01;
-	}
-
-#ifndef CFG_RAMBOOT
-	immap->im_siu_conf.sc_ppc_acr  = 0x03;
-	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-
-	memctl->memc_mptpr = CFG_MPTPR;
-
-#ifdef CFG_LSDRAM_BASE
-	/*
-	  Initialise local bus SDRAM only if the pins
-	  are configured as local bus pins and not as PCI.
-	*/
-	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
-		memctl->memc_lsrt  = CFG_LSRT;
-		memctl->memc_or4   = CFG_LSDRAM_OR;
-		memctl->memc_br4   = CFG_LSDRAM_BR;
-		ramaddr = (vu_char *)CFG_LSDRAM_BASE;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_PREA;
-		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_CBRR;
-		for (i = 0; i < 8; i++)
-			*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_MRW;
-		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_RFEN;
-	}
-#endif /* CFG_LSDRAM_BASE */
-
-	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or2  = CFG_PSDRAM_OR;
-	memctl->memc_br2  = CFG_PSDRAM_BR;
-	/*
-	 * The mode data for Mode Register Write command must appear on
-	 * the address lines during a mode-set cycle. It is driven by
-	 * the memory controller, in single PowerQUICC II mode,
-	 * according to PSDMR[CL] and PSDMR[BL] fields. In
-	 * 60x-compatible mode, software must drive the correct value on
-	 * the address lines. BL=0 because for 64-bit port size burst
-	 * length must be 4.
-	 */
-	ramaddr = (vu_char *)(CFG_SDRAM_BASE |
-			      ((CFG_PSDMR & PSDMR_CL_MSK) << 7) | 0x10);
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_PREA; /* Precharge all banks */
-	*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_CBRR; /* CBR refresh */
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_MRW;  /* Mode Register write */
-	*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_RFEN;    /* Refresh enable */
-	*ramaddr = c;
-#endif /* CFG_RAMBOOT */
-
-	/* Return total 60x bus SDRAM size */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-
-	printf("Board: Zephyr ZPC.1900 Rev. %c\n", bcsr[2] + 0x40);
-	return 0;
-}