summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2020-03-18 07:17:49 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2020-03-18 07:17:49 +0100
commit65984ba7aa462ec08d9828774c3c29386c425472 (patch)
tree773bf4958944d9410453bee0371096f4cf5b9ece
parent3cc8238ef792f4681eff28d408166f14552b0a03 (diff)
downloadbarebox-65984ba7aa462ec08d9828774c3c29386c425472.tar.gz
dts: update to v5.6-rc5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-rw-r--r--dts/Bindings/arm/arm,scmi.txt2
-rw-r--r--dts/Bindings/arm/arm,scpi.txt2
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm63138.txt2
-rw-r--r--dts/Bindings/arm/cpus.yaml2
-rw-r--r--dts/Bindings/arm/fsl.yaml2
-rw-r--r--dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt2
-rw-r--r--dts/Bindings/arm/msm/qcom,idle-state.txt2
-rw-r--r--dts/Bindings/arm/omap/mpu.txt2
-rw-r--r--dts/Bindings/arm/psci.yaml36
-rw-r--r--dts/Bindings/arm/stm32/st,mlahb.yaml2
-rw-r--r--dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml1
-rw-r--r--dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml2
-rw-r--r--dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml2
-rw-r--r--dts/Bindings/clock/qcom,gcc-apq8064.yaml2
-rw-r--r--dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml6
-rw-r--r--dts/Bindings/display/bridge/anx6345.yaml10
-rw-r--r--dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml2
-rw-r--r--dts/Bindings/display/panel/xinpeng,xpp055c272.yaml2
-rw-r--r--dts/Bindings/display/simple-framebuffer.yaml6
-rw-r--r--dts/Bindings/display/tilcdc/tilcdc.txt2
-rw-r--r--dts/Bindings/dma/ti/k3-udma.yaml14
-rw-r--r--dts/Bindings/gpu/arm,mali-bifrost.yaml14
-rw-r--r--dts/Bindings/gpu/arm,mali-midgard.yaml14
-rw-r--r--dts/Bindings/iio/adc/samsung,exynos-adc.yaml2
-rw-r--r--dts/Bindings/input/touchscreen/goodix.yaml2
-rw-r--r--dts/Bindings/input/twl4030-pwrbutton.txt2
-rw-r--r--dts/Bindings/leds/common.yaml2
-rw-r--r--dts/Bindings/leds/register-bit-led.txt2
-rw-r--r--dts/Bindings/media/ti,cal.yaml2
-rw-r--r--dts/Bindings/memory-controllers/ti/emif.txt2
-rw-r--r--dts/Bindings/mfd/max77650.yaml4
-rw-r--r--dts/Bindings/mfd/tps65910.txt4
-rw-r--r--dts/Bindings/mfd/twl-family.txt (renamed from dts/Bindings/mfd/twl-familly.txt)0
-rw-r--r--dts/Bindings/mfd/zii,rave-sp.txt2
-rw-r--r--dts/Bindings/misc/fsl,qoriq-mc.txt2
-rw-r--r--dts/Bindings/mmc/mmc-controller.yaml1
-rw-r--r--dts/Bindings/mtd/cadence-nand-controller.txt2
-rw-r--r--dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt2
-rw-r--r--dts/Bindings/nvmem/nvmem.yaml2
-rw-r--r--dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/st,stm32-pinctrl.yaml2
-rw-r--r--dts/Bindings/power/amlogic,meson-ee-pwrc.yaml2
-rw-r--r--dts/Bindings/power/domain-idle-state.txt33
-rw-r--r--dts/Bindings/power/domain-idle-state.yaml64
-rw-r--r--dts/Bindings/power/power-domain.yaml24
-rw-r--r--dts/Bindings/power/power_domain.txt2
-rw-r--r--dts/Bindings/regulator/qcom,spmi-regulator.txt2
-rw-r--r--dts/Bindings/regulator/regulator.yaml2
-rw-r--r--dts/Bindings/reset/intel,rcu-gw.yaml6
-rw-r--r--dts/Bindings/reset/st,stm32mp1-rcc.txt2
-rw-r--r--dts/Bindings/sound/st,stm32-sai.txt2
-rw-r--r--dts/Bindings/sound/st,stm32-spdifrx.txt2
-rw-r--r--dts/Bindings/spi/st,stm32-spi.yaml2
-rw-r--r--dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml2
-rw-r--r--dts/Bindings/thermal/brcm,avs-ro-thermal.yaml2
-rw-r--r--dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml2
-rw-r--r--dts/src/arm/am437x-idk-evm.dts4
-rw-r--r--dts/src/arm/bcm2711-rpi-4-b.dts3
-rw-r--r--dts/src/arm/bcm2837-rpi-3-a-plus.dts2
-rw-r--r--dts/src/arm/bcm2837-rpi-3-b-plus.dts2
-rw-r--r--dts/src/arm/dra7-evm.dts4
-rw-r--r--dts/src/arm/dra7-l4.dtsi4
-rw-r--r--dts/src/arm/dra7.dtsi2
-rw-r--r--dts/src/arm/dra76x.dtsi5
-rw-r--r--dts/src/arm/dra7xx-clocks.dtsi12
-rw-r--r--dts/src/arm/imx6dl-colibri-eval-v3.dts4
-rw-r--r--dts/src/arm/imx6qdl-phytec-phycore-som.dtsi1
-rw-r--r--dts/src/arm/imx7-colibri.dtsi1
-rw-r--r--dts/src/arm/imx7d.dtsi6
-rw-r--r--dts/src/arm/ls1021a.dtsi4
-rw-r--r--dts/src/arm/motorola-mapphone-common.dtsi13
-rw-r--r--dts/src/arm/r8a7779.dtsi2
-rw-r--r--dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts2
-rw-r--r--dts/src/arm64/amlogic/meson-sm1-sei610.dts1
-rw-r--r--dts/src/arm64/freescale/imx8qxp-mek.dts5
-rw-r--r--dts/src/arm64/intel/socfpga_agilex.dtsi6
-rw-r--r--dts/src/riscv/sifive/hifive-unleashed-a00.dts5
80 files changed, 220 insertions, 191 deletions
diff --git a/dts/Bindings/arm/arm,scmi.txt b/dts/Bindings/arm/arm,scmi.txt
index f493d69..dc102c4 100644
--- a/dts/Bindings/arm/arm,scmi.txt
+++ b/dts/Bindings/arm/arm,scmi.txt
@@ -102,7 +102,7 @@ Required sub-node properties:
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/power/power-domain.yaml
[3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
[5] Documentation/devicetree/bindings/reset/reset.txt
Example:
diff --git a/dts/Bindings/arm/arm,scpi.txt b/dts/Bindings/arm/arm,scpi.txt
index 7b83ef4..dd04d9d 100644
--- a/dts/Bindings/arm/arm,scpi.txt
+++ b/dts/Bindings/arm/arm,scpi.txt
@@ -109,7 +109,7 @@ Required properties:
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
[4] Documentation/devicetree/bindings/power/power-domain.yaml
Example:
diff --git a/dts/Bindings/arm/bcm/brcm,bcm63138.txt b/dts/Bindings/arm/bcm/brcm,bcm63138.txt
index b82b6a0..8c7a490 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm63138.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm63138.txt
@@ -62,7 +62,7 @@ Timer node:
Syscon reboot node:
-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
detailed list of properties, the two values defined below are specific to the
BCM6328-style timer:
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml
index 7a9c3ce..0d5b610 100644
--- a/dts/Bindings/arm/cpus.yaml
+++ b/dts/Bindings/arm/cpus.yaml
@@ -216,7 +216,7 @@ properties:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
description: |
List of phandles to idle state nodes supported
- by this cpu (see ./idle-states.txt).
+ by this cpu (see ./idle-states.yaml).
capacity-dmips-mhz:
$ref: '/schemas/types.yaml#/definitions/uint32'
diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml
index a8e0b4a..0e17e1f 100644
--- a/dts/Bindings/arm/fsl.yaml
+++ b/dts/Bindings/arm/fsl.yaml
@@ -160,7 +160,7 @@ properties:
items:
- enum:
- armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+ - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board
- eckelmann,imx6dl-ci4x10
- emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM
- emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base
diff --git a/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
index 115c5be..8defacc 100644
--- a/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
+++ b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
@@ -1,7 +1,7 @@
* Hisilicon Hi3519 System Controller Block
This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
Required properties:
- compatible: "hisilicon,hi3519-sysctrl".
diff --git a/dts/Bindings/arm/msm/qcom,idle-state.txt b/dts/Bindings/arm/msm/qcom,idle-state.txt
index 06df04c..6ce0b21 100644
--- a/dts/Bindings/arm/msm/qcom,idle-state.txt
+++ b/dts/Bindings/arm/msm/qcom,idle-state.txt
@@ -81,4 +81,4 @@ Example:
};
};
-[1]. Documentation/devicetree/bindings/arm/idle-states.txt
+[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
diff --git a/dts/Bindings/arm/omap/mpu.txt b/dts/Bindings/arm/omap/mpu.txt
index f301e63..e41490e 100644
--- a/dts/Bindings/arm/omap/mpu.txt
+++ b/dts/Bindings/arm/omap/mpu.txt
@@ -17,7 +17,7 @@ am335x and am437x only:
- pm-sram: Phandles to ocmcram nodes to be used for power management.
First should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
- data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+ data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Examples:
diff --git a/dts/Bindings/arm/psci.yaml b/dts/Bindings/arm/psci.yaml
index 8ef8542..5e66934 100644
--- a/dts/Bindings/arm/psci.yaml
+++ b/dts/Bindings/arm/psci.yaml
@@ -100,13 +100,14 @@ properties:
bindings in [1]) must specify this property.
[1] Kernel documentation - ARM idle states bindings
- Documentation/devicetree/bindings/arm/idle-states.txt
-
- "#power-domain-cells":
- description:
- The number of cells in a PM domain specifier as per binding in [3].
- Must be 0 as to represent a single PM domain.
+ Documentation/devicetree/bindings/arm/idle-states.yaml
+patternProperties:
+ "^power-domain-":
+ allOf:
+ - $ref: "../power/power-domain.yaml#"
+ type: object
+ description: |
ARM systems can have multiple cores, sometimes in an hierarchical
arrangement. This often, but not always, maps directly to the processor
power topology of the system. Individual nodes in a topology have their
@@ -122,14 +123,8 @@ properties:
helps to implement support for OSI mode and OS implementations may choose
to mandate it.
- [3] Documentation/devicetree/bindings/power/power_domain.txt
- [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
-
- power-domains:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
- description:
- List of phandles and PM domain specifiers, as defined by bindings of the
- PM domain provider.
+ [3] Documentation/devicetree/bindings/power/power-domain.yaml
+ [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
required:
- compatible
@@ -199,7 +194,7 @@ examples:
CPU0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
power-domains = <&CPU_PD0>;
@@ -208,7 +203,7 @@ examples:
CPU1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
power-domains = <&CPU_PD1>;
@@ -224,6 +219,9 @@ examples:
exit-latency-us = <10>;
min-residency-us = <100>;
};
+ };
+
+ domain-idle-states {
CLUSTER_RET: cluster-retention {
compatible = "domain-idle-state";
@@ -247,19 +245,19 @@ examples:
compatible = "arm,psci-1.0";
method = "smc";
- CPU_PD0: cpu-pd0 {
+ CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
- CPU_PD1: cpu-pd1 {
+ CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
- CLUSTER_PD: cluster-pd {
+ CLUSTER_PD: power-domain-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
};
diff --git a/dts/Bindings/arm/stm32/st,mlahb.yaml b/dts/Bindings/arm/stm32/st,mlahb.yaml
index 68917bb..55f7938 100644
--- a/dts/Bindings/arm/stm32/st,mlahb.yaml
+++ b/dts/Bindings/arm/stm32/st,mlahb.yaml
@@ -52,7 +52,7 @@ required:
examples:
- |
- mlahb: ahb {
+ mlahb: ahb@38000000 {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 9fe11ce..8097361 100644
--- a/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -70,7 +70,6 @@ examples:
#size-cells = <0>;
pmic@3e3 {
- compatible = "...";
reg = <0x3e3>;
/* ... */
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index 69cfa4a..c604822 100644
--- a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -40,7 +40,7 @@ additionalProperties: false
examples:
- |
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 07f38de..43963c3 100644
--- a/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
examples:
- |
- clk@0600005c {
+ clk@600005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;
diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
index 17f8717..3647007 100644
--- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -42,7 +42,7 @@ properties:
be part of GCC and hence the TSENS properties can also be part
of the GCC/clock-controller node.
For more details on the TSENS properties please refer
- Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+ Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
nvmem-cell-names:
minItems: 1
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 5d5d396..6009324 100644
--- a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -49,11 +49,7 @@ examples:
resets = <&tcon_ch0_clk 0>;
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
+ tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
diff --git a/dts/Bindings/display/bridge/anx6345.yaml b/dts/Bindings/display/bridge/anx6345.yaml
index 6d72b3d..c211038 100644
--- a/dts/Bindings/display/bridge/anx6345.yaml
+++ b/dts/Bindings/display/bridge/anx6345.yaml
@@ -79,21 +79,15 @@ examples:
#size-cells = <0>;
anx6345_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- anx6345_in_tcon0: endpoint@0 {
- reg = <0>;
+ anx6345_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
};
anx6345_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- anx6345_out_panel: endpoint@0 {
- reg = <0>;
+ anx6345_out_panel: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
diff --git a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index 4ebcea7..a614644 100644
--- a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "leadtek,ltk500hd1829";
reg = <0>;
diff --git a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
index 186e5e1..22c91be 100644
--- a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "xinpeng,xpp055c272";
reg = <0>;
diff --git a/dts/Bindings/display/simple-framebuffer.yaml b/dts/Bindings/display/simple-framebuffer.yaml
index 678776b..1db608c 100644
--- a/dts/Bindings/display/simple-framebuffer.yaml
+++ b/dts/Bindings/display/simple-framebuffer.yaml
@@ -174,10 +174,6 @@ examples:
};
};
- soc@1c00000 {
- lcdc0: lcdc@1c0c000 {
- compatible = "allwinner,sun4i-a10-lcdc";
- };
- };
+ lcdc0: lcdc { };
...
diff --git a/dts/Bindings/display/tilcdc/tilcdc.txt b/dts/Bindings/display/tilcdc/tilcdc.txt
index 7bf1bb4..aac617a 100644
--- a/dts/Bindings/display/tilcdc/tilcdc.txt
+++ b/dts/Bindings/display/tilcdc/tilcdc.txt
@@ -37,7 +37,7 @@ Optional nodes:
supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
- Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+ Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
tfp410 DVI encoder or lcd panel to lcdc
[1] There is an errata about AM335x color wiring. For 16-bit color mode
diff --git a/dts/Bindings/dma/ti/k3-udma.yaml b/dts/Bindings/dma/ti/k3-udma.yaml
index 8b5c346..34780d7 100644
--- a/dts/Bindings/dma/ti/k3-udma.yaml
+++ b/dts/Bindings/dma/ti/k3-udma.yaml
@@ -143,7 +143,7 @@ examples:
#size-cells = <2>;
dma-coherent;
dma-ranges;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
ti,sci-dev-id = <118>;
@@ -169,16 +169,4 @@ examples:
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
};
};
-
- mcasp0: mcasp@02B00000 {
- dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
- dma-names = "tx", "rx";
- };
-
- crypto: crypto@4E00000 {
- compatible = "ti,sa2ul-crypto";
-
- dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
- dma-names = "tx", "rx1", "rx2";
- };
};
diff --git a/dts/Bindings/gpu/arm,mali-bifrost.yaml b/dts/Bindings/gpu/arm,mali-bifrost.yaml
index 4ea6a87..e8b99ad 100644
--- a/dts/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/dts/Bindings/gpu/arm,mali-bifrost.yaml
@@ -84,31 +84,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/dts/Bindings/gpu/arm,mali-midgard.yaml b/dts/Bindings/gpu/arm,mali-midgard.yaml
index 36f59b3..8d966f3 100644
--- a/dts/Bindings/gpu/arm,mali-midgard.yaml
+++ b/dts/Bindings/gpu/arm,mali-midgard.yaml
@@ -138,31 +138,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
index f46de17..cc3c8ea 100644
--- a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
@@ -123,7 +123,7 @@ examples:
samsung,syscon-phandle = <&pmu_system_controller>;
/* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
+ ncp15wb473 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml
index d7c3262..c99ed39 100644
--- a/dts/Bindings/input/touchscreen/goodix.yaml
+++ b/dts/Bindings/input/touchscreen/goodix.yaml
@@ -62,7 +62,7 @@ required:
examples:
- |
- i2c@00000000 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
gt928@5d {
diff --git a/dts/Bindings/input/twl4030-pwrbutton.txt b/dts/Bindings/input/twl4030-pwrbutton.txt
index c864a46..f502121 100644
--- a/dts/Bindings/input/twl4030-pwrbutton.txt
+++ b/dts/Bindings/input/twl4030-pwrbutton.txt
@@ -1,7 +1,7 @@
Texas Instruments TWL family (twl4030) pwrbutton module
This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
This module provides a simple power button event via an Interrupt.
diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml
index d97d099..c60b994 100644
--- a/dts/Bindings/leds/common.yaml
+++ b/dts/Bindings/leds/common.yaml
@@ -85,7 +85,7 @@ properties:
# LED will act as a back-light, controlled by the framebuffer system
- backlight
# LED will turn on (but for leds-gpio see "default-state" property in
- # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+ # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
- default-on
# LED "double" flashes at a load average based rate
- heartbeat
diff --git a/dts/Bindings/leds/register-bit-led.txt b/dts/Bindings/leds/register-bit-led.txt
index cf1ea40..c7af6f7 100644
--- a/dts/Bindings/leds/register-bit-led.txt
+++ b/dts/Bindings/leds/register-bit-led.txt
@@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a
single LED. The register bit LEDs appear as children to the
syscon device, with the proper compatible string. For the
syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
Each LED is represented as a sub-node of the syscon device. Each
node's name represents the name of the corresponding LED.
diff --git a/dts/Bindings/media/ti,cal.yaml b/dts/Bindings/media/ti,cal.yaml
index 1ea7841..5e06662 100644
--- a/dts/Bindings/media/ti,cal.yaml
+++ b/dts/Bindings/media/ti,cal.yaml
@@ -177,7 +177,7 @@ examples:
};
};
- i2c5: i2c@4807c000 {
+ i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/Bindings/memory-controllers/ti/emif.txt b/dts/Bindings/memory-controllers/ti/emif.txt
index 44d7146..63f674f 100644
--- a/dts/Bindings/memory-controllers/ti/emif.txt
+++ b/dts/Bindings/memory-controllers/ti/emif.txt
@@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372":
- sram : Phandles for generic sram driver nodes,
first should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
- data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+ data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Optional properties:
diff --git a/dts/Bindings/mfd/max77650.yaml b/dts/Bindings/mfd/max77650.yaml
index 4a70f87..4803857 100644
--- a/dts/Bindings/mfd/max77650.yaml
+++ b/dts/Bindings/mfd/max77650.yaml
@@ -97,14 +97,14 @@ examples:
regulators {
compatible = "maxim,max77650-regulator";
- max77650_ldo: regulator@0 {
+ max77650_ldo: regulator-ldo {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};
- max77650_sbb0: regulator@1 {
+ max77650_sbb0: regulator-sbb0 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;
diff --git a/dts/Bindings/mfd/tps65910.txt b/dts/Bindings/mfd/tps65910.txt
index 4f62143..a5ced46 100644
--- a/dts/Bindings/mfd/tps65910.txt
+++ b/dts/Bindings/mfd/tps65910.txt
@@ -26,8 +26,8 @@ Required properties:
ldo6, ldo7, ldo8
- xxx-supply: Input voltage supply regulator.
- These entries are require if regulators are enabled for a device. Missing of these
- properties can cause the regulator registration fails.
+ These entries are required if regulators are enabled for a device. Missing these
+ properties can cause the regulator registration to fail.
If some of input supply is powered through battery or always-on supply then
also it is require to have these parameters with proper node handle of always
on power supply.
diff --git a/dts/Bindings/mfd/twl-familly.txt b/dts/Bindings/mfd/twl-family.txt
index 56f244b..56f244b 100644
--- a/dts/Bindings/mfd/twl-familly.txt
+++ b/dts/Bindings/mfd/twl-family.txt
diff --git a/dts/Bindings/mfd/zii,rave-sp.txt b/dts/Bindings/mfd/zii,rave-sp.txt
index 088eff9..e0f901e 100644
--- a/dts/Bindings/mfd/zii,rave-sp.txt
+++ b/dts/Bindings/mfd/zii,rave-sp.txt
@@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices:
Device Description
------ -----------
rave-sp-wdt : Watchdog
-rave-sp-nvmem : Interface to onborad EEPROM
+rave-sp-nvmem : Interface to onboard EEPROM
rave-sp-backlight : Display backlight
rave-sp-hwmon : Interface to onboard hardware sensors
rave-sp-leds : Interface to onboard LEDs
diff --git a/dts/Bindings/misc/fsl,qoriq-mc.txt b/dts/Bindings/misc/fsl,qoriq-mc.txt
index bb7e896..9134e9b 100644
--- a/dts/Bindings/misc/fsl,qoriq-mc.txt
+++ b/dts/Bindings/misc/fsl,qoriq-mc.txt
@@ -26,7 +26,7 @@ For generic IOMMU bindings, see
Documentation/devicetree/bindings/iommu/iommu.txt.
For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
Required properties:
diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml
index 3c0df40..8fded83 100644
--- a/dts/Bindings/mmc/mmc-controller.yaml
+++ b/dts/Bindings/mmc/mmc-controller.yaml
@@ -370,6 +370,7 @@ examples:
mmc3: mmc@1c12000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vmmc3>;
diff --git a/dts/Bindings/mtd/cadence-nand-controller.txt b/dts/Bindings/mtd/cadence-nand-controller.txt
index f3893c4..d2eada5 100644
--- a/dts/Bindings/mtd/cadence-nand-controller.txt
+++ b/dts/Bindings/mtd/cadence-nand-controller.txt
@@ -27,7 +27,7 @@ Required properties of NAND chips:
- reg: shall contain the native Chip Select ids from 0 to max supported by
the cadence nand flash controller
-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.
Example:
diff --git a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
index 48a7f91..88b57b0 100644
--- a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -45,7 +45,7 @@ Optional properties:
switch queue
- resets: a single phandle and reset identifier pair. See
- Documentation/devicetree/binding/reset/reset.txt for details.
+ Documentation/devicetree/bindings/reset/reset.txt for details.
- reset-names: If the "reset" property is specified, this property should have
the value "switch" to denote the switch reset line.
diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml
index b43c6c6..6598022 100644
--- a/dts/Bindings/nvmem/nvmem.yaml
+++ b/dts/Bindings/nvmem/nvmem.yaml
@@ -76,6 +76,8 @@ examples:
qfprom: eeprom@700000 {
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x00700000 0x100000>;
+
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
/* ... */
diff --git a/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 020ef9e..94ac236 100644
--- a/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -86,7 +86,7 @@ examples:
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index bb690e2..135c7df 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
"aspeed,ast2400-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index f7f5d57..824f7fd 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -18,7 +18,7 @@ description: |+
"aspeed,g5-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 3749fa2..ac8d1c3 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
"aspeed,ast2600-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index 754ea7a..ef4de32 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -248,7 +248,7 @@ examples:
};
//Example 3 pin groups
- pinctrl@60020000 {
+ pinctrl {
usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>;
diff --git a/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml b/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
index aab70e8..d3098c9 100644
--- a/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -18,7 +18,7 @@ description: |+
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/power/domain-idle-state.txt b/dts/Bindings/power/domain-idle-state.txt
deleted file mode 100644
index eefc7ed..0000000
--- a/dts/Bindings/power/domain-idle-state.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-PM Domain Idle State Node:
-
-A domain idle state node represents the state parameters that will be used to
-select the state when there are no active components in the domain.
-
-The state node has the following parameters -
-
-- compatible:
- Usage: Required
- Value type: <string>
- Definition: Must be "domain-idle-state".
-
-- entry-latency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing worst case latency in
- microseconds required to enter the idle state.
- The exit-latency-us duration may be guaranteed
- only after entry-latency-us has passed.
-
-- exit-latency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing worst case latency
- in microseconds required to exit the idle state.
-
-- min-residency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing minimum residency duration
- in microseconds after which the idle state will yield
- power benefits after overcoming the overhead in entering
-i the idle state.
diff --git a/dts/Bindings/power/domain-idle-state.yaml b/dts/Bindings/power/domain-idle-state.yaml
new file mode 100644
index 0000000..dfba1af
--- /dev/null
+++ b/dts/Bindings/power/domain-idle-state.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States binding description
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ A domain idle state node represents the state parameters that will be used to
+ select the state when there are no active components in the PM domain.
+
+properties:
+ $nodename:
+ const: domain-idle-states
+
+patternProperties:
+ "^(cpu|cluster|domain)-":
+ type: object
+ description:
+ Each state node represents a domain idle state description.
+
+ properties:
+ compatible:
+ const: domain-idle-state
+
+ entry-latency-us:
+ description:
+ The worst case latency in microseconds required to enter the idle
+ state. Note that, the exit-latency-us duration may be guaranteed only
+ after the entry-latency-us has passed.
+
+ exit-latency-us:
+ description:
+ The worst case latency in microseconds required to exit the idle
+ state.
+
+ min-residency-us:
+ description:
+ The minimum residency duration in microseconds after which the idle
+ state will yield power benefits, after overcoming the overhead while
+ entering the idle state.
+
+ required:
+ - compatible
+ - entry-latency-us
+ - exit-latency-us
+ - min-residency-us
+
+examples:
+ - |
+
+ domain-idle-states {
+ domain_retention: domain-retention {
+ compatible = "domain-idle-state";
+ entry-latency-us = <20>;
+ exit-latency-us = <40>;
+ min-residency-us = <80>;
+ };
+ };
+...
diff --git a/dts/Bindings/power/power-domain.yaml b/dts/Bindings/power/power-domain.yaml
index 455b573..6047aac 100644
--- a/dts/Bindings/power/power-domain.yaml
+++ b/dts/Bindings/power/power-domain.yaml
@@ -25,22 +25,20 @@ description: |+
properties:
$nodename:
- pattern: "^(power-controller|power-domain)(@.*)?$"
+ pattern: "^(power-controller|power-domain)([@-].*)?$"
domain-idle-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
- description:
- A phandle of an idle-state that shall be soaked into a generic domain
- power state. The idle state definitions are compatible with
- domain-idle-state specified in
- Documentation/devicetree/bindings/power/domain-idle-state.txt
- phandles that are not compatible with domain-idle-state will be ignored.
- The domain-idle-state property reflects the idle state of this PM domain
- and not the idle states of the devices or sub-domains in the PM domain.
- Devices and sub-domains have their own idle-states independent
- of the parent domain's idle states. In the absence of this property,
- the domain would be considered as capable of being powered-on
- or powered-off.
+ description: |
+ Phandles of idle states that defines the available states for the
+ power-domain provider. The idle state definitions are compatible with the
+ domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+ Note that, the domain-idle-state property reflects the idle states of this
+ PM domain and not the idle states of the devices or sub-domains in the PM
+ domain. Devices and sub-domains have their own idle states independent of
+ the parent domain's idle states. In the absence of this property, the
+ domain would be considered as capable of being powered-on or powered-off.
operating-points-v2:
$ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/dts/Bindings/power/power_domain.txt b/dts/Bindings/power/power_domain.txt
index 5b09b2d..08497ef 100644
--- a/dts/Bindings/power/power_domain.txt
+++ b/dts/Bindings/power/power_domain.txt
@@ -109,4 +109,4 @@ Example:
required-opps = <&domain1_opp_1>;
};
-[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml
diff --git a/dts/Bindings/regulator/qcom,spmi-regulator.txt b/dts/Bindings/regulator/qcom,spmi-regulator.txt
index f5cdac8..8b00519 100644
--- a/dts/Bindings/regulator/qcom,spmi-regulator.txt
+++ b/dts/Bindings/regulator/qcom,spmi-regulator.txt
@@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the PMICs below.
-pm8005:
+pm8004:
s2, s5
pm8005:
diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml
index 92ff2e8..91a39a3 100644
--- a/dts/Bindings/regulator/regulator.yaml
+++ b/dts/Bindings/regulator/regulator.yaml
@@ -191,7 +191,7 @@ patternProperties:
examples:
- |
- xyzreg: regulator@0 {
+ xyzreg: regulator {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
diff --git a/dts/Bindings/reset/intel,rcu-gw.yaml b/dts/Bindings/reset/intel,rcu-gw.yaml
index 246dea8..8ac4372 100644
--- a/dts/Bindings/reset/intel,rcu-gw.yaml
+++ b/dts/Bindings/reset/intel,rcu-gw.yaml
@@ -23,7 +23,11 @@ properties:
description: Global reset register offset and bit offset.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- - maxItems: 2
+ items:
+ - description: Register offset
+ - description: Register bit offset
+ minimum: 0
+ maximum: 31
"#reset-cells":
minimum: 2
diff --git a/dts/Bindings/reset/st,stm32mp1-rcc.txt b/dts/Bindings/reset/st,stm32mp1-rcc.txt
index b4edaf7..2880d5d 100644
--- a/dts/Bindings/reset/st,stm32mp1-rcc.txt
+++ b/dts/Bindings/reset/st,stm32mp1-rcc.txt
@@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller
The RCC IP is both a reset and a clock controller.
-Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
diff --git a/dts/Bindings/sound/st,stm32-sai.txt b/dts/Bindings/sound/st,stm32-sai.txt
index 944743d..c42b91e 100644
--- a/dts/Bindings/sound/st,stm32-sai.txt
+++ b/dts/Bindings/sound/st,stm32-sai.txt
@@ -36,7 +36,7 @@ SAI subnodes required properties:
- clock-names: Must contain "sai_ck".
Must also contain "MCLK", if SAI shares a master clock,
with a SAI set as MCLK clock provider.
- - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+ - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
diff --git a/dts/Bindings/sound/st,stm32-spdifrx.txt b/dts/Bindings/sound/st,stm32-spdifrx.txt
index 33826f2..ca91017 100644
--- a/dts/Bindings/sound/st,stm32-spdifrx.txt
+++ b/dts/Bindings/sound/st,stm32-spdifrx.txt
@@ -10,7 +10,7 @@ Required properties:
- clock-names: must contain "kclk"
- interrupts: cpu DAI interrupt line
- dmas: DMA specifiers for audio data DMA and iec control flow DMA
- See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+ See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
Optional properties:
diff --git a/dts/Bindings/spi/st,stm32-spi.yaml b/dts/Bindings/spi/st,stm32-spi.yaml
index f0d9796..e49ecbf 100644
--- a/dts/Bindings/spi/st,stm32-spi.yaml
+++ b/dts/Bindings/spi/st,stm32-spi.yaml
@@ -49,7 +49,7 @@ properties:
dmas:
description: |
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
- the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
items:
- description: rx DMA channel
- description: tx DMA channel
diff --git a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 80bac7a..4b55094 100644
--- a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -125,7 +125,7 @@ examples:
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
diff --git a/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
index d9fdf48..f3e68ed 100644
--- a/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -17,7 +17,7 @@ description: |+
"brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml b/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
index 23e989e..d918cee 100644
--- a/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -87,7 +87,7 @@ additionalProperties: false
examples:
- |
- timer {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>,
diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts
index f3ced6d..9f66f96 100644
--- a/dts/src/arm/am437x-idk-evm.dts
+++ b/dts/src/arm/am437x-idk-evm.dts
@@ -526,11 +526,11 @@
* Supply voltage supervisor on board will not allow opp50 so
* disable it and set opp100 as suspend OPP.
*/
- opp50@300000000 {
+ opp50-300000000 {
status = "disabled";
};
- opp100@600000000 {
+ opp100-600000000 {
opp-suspend;
};
};
diff --git a/dts/src/arm/bcm2711-rpi-4-b.dts b/dts/src/arm/bcm2711-rpi-4-b.dts
index 1b5a835..efea891 100644
--- a/dts/src/arm/bcm2711-rpi-4-b.dts
+++ b/dts/src/arm/bcm2711-rpi-4-b.dts
@@ -21,6 +21,7 @@
aliases {
ethernet0 = &genet;
+ pcie0 = &pcie0;
};
leds {
@@ -31,6 +32,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
};
};
diff --git a/dts/src/arm/bcm2837-rpi-3-a-plus.dts b/dts/src/arm/bcm2837-rpi-3-a-plus.dts
index 66ab35e..28be033 100644
--- a/dts/src/arm/bcm2837-rpi-3-a-plus.dts
+++ b/dts/src/arm/bcm2837-rpi-3-a-plus.dts
@@ -26,6 +26,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
};
};
};
diff --git a/dts/src/arm/bcm2837-rpi-3-b-plus.dts b/dts/src/arm/bcm2837-rpi-3-b-plus.dts
index 74ed6d0..3734314 100644
--- a/dts/src/arm/bcm2837-rpi-3-b-plus.dts
+++ b/dts/src/arm/bcm2837-rpi-3-b-plus.dts
@@ -27,6 +27,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
};
};
diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts
index de7f85e..af06a55 100644
--- a/dts/src/arm/dra7-evm.dts
+++ b/dts/src/arm/dra7-evm.dts
@@ -61,10 +61,10 @@
regulator-max-microvolt = <1800000>;
};
- evm_3v3: fixedregulator-evm3v3 {
+ vsys_3v3: fixedregulator-vsys3v3 {
/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
compatible = "regulator-fixed";
- regulator-name = "evm_3v3";
+ regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&evm_12v0>;
diff --git a/dts/src/arm/dra7-l4.dtsi b/dts/src/arm/dra7-l4.dtsi
index fc41883..2119a78 100644
--- a/dts/src/arm/dra7-l4.dtsi
+++ b/dts/src/arm/dra7-l4.dtsi
@@ -3474,6 +3474,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3501,6 +3502,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3528,6 +3530,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3555,6 +3558,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi
index d78b684..4305051 100644
--- a/dts/src/arm/dra7.dtsi
+++ b/dts/src/arm/dra7.dtsi
@@ -184,6 +184,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -238,6 +239,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
diff --git a/dts/src/arm/dra76x.dtsi b/dts/src/arm/dra76x.dtsi
index 2f7539a..42b8a20 100644
--- a/dts/src/arm/dra76x.dtsi
+++ b/dts/src/arm/dra76x.dtsi
@@ -128,3 +128,8 @@
&usb4_tm {
status = "disabled";
};
+
+&mmc3 {
+ /* dra76x is not affected by i887 */
+ max-frequency = <96000000>;
+};
diff --git a/dts/src/arm/dra7xx-clocks.dtsi b/dts/src/arm/dra7xx-clocks.dtsi
index 55cef4c..dc0a93b 100644
--- a/dts/src/arm/dra7xx-clocks.dtsi
+++ b/dts/src/arm/dra7xx-clocks.dtsi
@@ -796,16 +796,6 @@
clock-div = <1>;
};
- ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
- ti,bit-shift = <24>;
- reg = <0x0520>;
- assigned-clocks = <&ipu1_gfclk_mux>;
- assigned-clock-parents = <&dpll_core_h22x2_ck>;
- };
-
dummy_ck: dummy_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -1564,6 +1554,8 @@
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
+ assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+ assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
ipu_clkctrl: ipu-clkctrl@50 {
diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts
index cd07562..84fcc20 100644
--- a/dts/src/arm/imx6dl-colibri-eval-v3.dts
+++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts
@@ -275,7 +275,7 @@
/* SRAM on Colibri nEXT_CS0 */
sram@0,0 {
- compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+ compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
reg = <0 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -286,7 +286,7 @@
/* SRAM on Colibri nEXT_CS1 */
sram@1,0 {
- compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+ compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
reg = <1 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi b/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
index 978dc1c..4d18952 100644
--- a/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
+++ b/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
@@ -192,7 +192,6 @@
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
non-removable;
- vmmc-supply = <&vdd_emmc_1p8>;
status = "disabled";
};
diff --git a/dts/src/arm/imx7-colibri.dtsi b/dts/src/arm/imx7-colibri.dtsi
index d05be3f..04717cf 100644
--- a/dts/src/arm/imx7-colibri.dtsi
+++ b/dts/src/arm/imx7-colibri.dtsi
@@ -336,7 +336,6 @@
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
- max-frequency = <100000000>;
vmmc-supply = <&reg_module_3v3>;
vqmmc-supply = <&reg_DCDC3>;
non-removable;
diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi
index 92f6d0c..4c22828 100644
--- a/dts/src/arm/imx7d.dtsi
+++ b/dts/src/arm/imx7d.dtsi
@@ -44,7 +44,7 @@
opp-hz = /bits/ 64 <792000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
- opp-supported-hw = <0xd>, <0xf>;
+ opp-supported-hw = <0xd>, <0x7>;
opp-suspend;
};
@@ -52,7 +52,7 @@
opp-hz = /bits/ 64 <996000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
- opp-supported-hw = <0xc>, <0xf>;
+ opp-supported-hw = <0xc>, <0x7>;
opp-suspend;
};
@@ -60,7 +60,7 @@
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1225000>;
clock-latency-ns = <150000>;
- opp-supported-hw = <0x8>, <0xf>;
+ opp-supported-hw = <0x8>, <0x3>;
opp-suspend;
};
};
diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi
index 0855b1f..760a68c 100644
--- a/dts/src/arm/ls1021a.dtsi
+++ b/dts/src/arm/ls1021a.dtsi
@@ -747,7 +747,7 @@
};
mdio0: mdio@2d24000 {
- compatible = "fsl,etsec2-mdio";
+ compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@@ -756,7 +756,7 @@
};
mdio1: mdio@2d64000 {
- compatible = "fsl,etsec2-mdio";
+ compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/src/arm/motorola-mapphone-common.dtsi b/dts/src/arm/motorola-mapphone-common.dtsi
index 8566550..b6e82b1 100644
--- a/dts/src/arm/motorola-mapphone-common.dtsi
+++ b/dts/src/arm/motorola-mapphone-common.dtsi
@@ -182,6 +182,14 @@
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
+
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
};
&dss {
@@ -205,6 +213,8 @@
vddi-supply = <&lcd_regulator>;
reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ backlight = <&backlight>;
+
width-mm = <50>;
height-mm = <89>;
@@ -393,12 +403,11 @@
ramp-up-us = <1024>;
ramp-down-us = <8193>;
- led@0 {
+ backlight_led: led@0 {
reg = <0>;
led-sources = <2>;
ti,led-mode = <0>;
label = ":backlight";
- linux,default-trigger = "backlight";
};
led@1 {
diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi
index beb9885..c0999e2 100644
--- a/dts/src/arm/r8a7779.dtsi
+++ b/dts/src/arm/r8a7779.dtsi
@@ -377,7 +377,7 @@
};
sata: sata@fc600000 {
- compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
+ compatible = "renesas,sata-r8a7779";
reg = <0xfc600000 0x200000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
index f82f25c..d5dc128 100644
--- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
+++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
@@ -327,7 +327,7 @@
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <60000000>;
non-removable;
disable-wp;
diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
index a8bb3fa..cb1b48f 100644
--- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -593,6 +593,7 @@
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
diff --git a/dts/src/arm64/freescale/imx8qxp-mek.dts b/dts/src/arm64/freescale/imx8qxp-mek.dts
index d3d26cc..13460a3 100644
--- a/dts/src/arm64/freescale/imx8qxp-mek.dts
+++ b/dts/src/arm64/freescale/imx8qxp-mek.dts
@@ -52,11 +52,6 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
};
};
diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi
index e1d357e..d8c44d3 100644
--- a/dts/src/arm64/intel/socfpga_agilex.dtsi
+++ b/dts/src/arm64/intel/socfpga_agilex.dtsi
@@ -102,7 +102,7 @@
};
gmac0: ethernet@ff800000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff800000 0x2000>;
interrupts = <0 90 4>;
interrupt-names = "macirq";
@@ -118,7 +118,7 @@
};
gmac1: ethernet@ff802000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff802000 0x2000>;
interrupts = <0 91 4>;
interrupt-names = "macirq";
@@ -134,7 +134,7 @@
};
gmac2: ethernet@ff804000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff804000 0x2000>;
interrupts = <0 92 4>;
interrupt-names = "macirq";
diff --git a/dts/src/riscv/sifive/hifive-unleashed-a00.dts b/dts/src/riscv/sifive/hifive-unleashed-a00.dts
index 609198c..4a2729f 100644
--- a/dts/src/riscv/sifive/hifive-unleashed-a00.dts
+++ b/dts/src/riscv/sifive/hifive-unleashed-a00.dts
@@ -2,6 +2,7 @@
/* Copyright (c) 2018-2019 SiFive, Inc */
#include "fu540-c000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
@@ -41,6 +42,10 @@
clock-frequency = <RTCCLK_FREQ>;
clock-output-names = "rtcclk";
};
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
};
&uart0 {