Merge branch 'for-next/dts'

27 files changed, 101 insertions, 47 deletions

diff --git a/dts/Bindings/clock/silabs,si5351.txt b/dts/Bindings/clock/silabs,si5351.txt
index c40711e8e8..28b28309f5 100644
--- a/dts/Bindings/clock/silabs,si5351.txt
+++ b/dts/Bindings/clock/silabs,si5351.txt
@@ -17,7 +17,8 @@ Required properties:
 - #clock-cells: from common clock binding; shall be set to 1.
 - clocks: from common clock binding; list of parent clock
   handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only.
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
 - #address-cells: shall be set to 1.
 - #size-cells: shall be set to 0.
 
@@ -71,6 +72,7 @@ i2c-master-node {
 
 		/* connect xtal input to 25MHz reference */
 		clocks = <&ref25>;
+		clock-names = "xtal";
 
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
diff --git a/dts/Bindings/input/touchscreen/tsc2005.txt b/dts/Bindings/input/touchscreen/tsc2005.txt
index 4b641c7bf1..09089a6d69 100644
--- a/dts/Bindings/input/touchscreen/tsc2005.txt
+++ b/dts/Bindings/input/touchscreen/tsc2005.txt
@@ -32,8 +32,8 @@ Example:
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;
diff --git a/dts/Bindings/mtd/m25p80.txt b/dts/Bindings/mtd/jedec,spi-nor.txt
index f20b111b50..2bee68103b 100644
--- a/dts/Bindings/mtd/m25p80.txt
+++ b/dts/Bindings/mtd/jedec,spi-nor.txt
@@ -8,8 +8,8 @@ Required properties:
                is not Linux-only, but in case of Linux, see the "m25p_ids"
                table in drivers/mtd/devices/m25p80.c for the list of supported
                chips.
-               Must also include "nor-jedec" for any SPI NOR flash that can be
-               identified by the JEDEC READ ID opcode (0x9F).
+               Must also include "jedec,spi-nor" for any SPI NOR flash that can
+               be identified by the JEDEC READ ID opcode (0x9F).
 - reg : Chip-Select number
 - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
 
@@ -25,7 +25,7 @@ Example:
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,m25p80", "nor-jedec";
+		compatible = "spansion,m25p80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 		m25p,fast-read;
diff --git a/dts/Bindings/net/cdns-emac.txt b/dts/Bindings/net/cdns-emac.txt
index abd67c13d3..4451ee9732 100644
--- a/dts/Bindings/net/cdns-emac.txt
+++ b/dts/Bindings/net/cdns-emac.txt
@@ -3,7 +3,8 @@
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{emac}"
   Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  or the generic form: "cdns,emac".
+  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
+  Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
 - phy-mode: see ethernet.txt file in the same directory.
diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas_usbhs.txt
index dc2a18f0b3..ddbe304beb 100644
--- a/dts/Bindings/usb/renesas_usbhs.txt
+++ b/dts/Bindings/usb/renesas_usbhs.txt
@@ -15,10 +15,8 @@ Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
   - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : Must contain a list of DMA names:
-   - tx0 ... tx<n>
-   - rx0 ... rx<n>
-    - This <n> means DnFIFO in USBHS module.
+  - dma-names : named "ch%d", where %d is the channel number ranging from zero
+                to the number of channels (DnFIFOs) minus one.
 
 Example:
 	usbhs: usb@e6590000 {
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi
index c3255e0c90..dbb3f4d2bf 100644
--- a/dts/src/arm/am335x-bone-common.dtsi
+++ b/dts/src/arm/am335x-bone-common.dtsi
@@ -223,6 +223,25 @@
 /include/ "tps65217.dtsi"
 
 &tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";
diff --git a/dts/src/arm/am335x-boneblack.dts b/dts/src/arm/am335x-boneblack.dts
index 5c42d259fa..901739fcb8 100644
--- a/dts/src/arm/am335x-boneblack.dts
+++ b/dts/src/arm/am335x-boneblack.dts
@@ -80,7 +80,3 @@
 		status = "okay";
 	};
 };
-
-&rtc {
-	system-power-controller;
-};
diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts
index 87fc7a35e8..156d05efcb 100644
--- a/dts/src/arm/am335x-evmsk.dts
+++ b/dts/src/arm/am335x-evmsk.dts
@@ -654,7 +654,7 @@
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
-		interrupt-parent = <&gpio1>;
+		interrupt-parent = <&gpio0>;
 		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 		ref-clock-frequency = <38400000>;
 	};
diff --git a/dts/src/arm/am35xx-clocks.dtsi b/dts/src/arm/am35xx-clocks.dtsi
index 518b8fde88..18cc826e9d 100644
--- a/dts/src/arm/am35xx-clocks.dtsi
+++ b/dts/src/arm/am35xx-clocks.dtsi
@@ -12,7 +12,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <1>;
 	};
 
@@ -20,7 +20,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <9>;
 	};
 
@@ -28,7 +28,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <2>;
 	};
 
@@ -36,7 +36,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <10>;
 	};
 
@@ -44,7 +44,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <0>;
 	};
 
@@ -52,7 +52,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <8>;
 	};
 
@@ -60,7 +60,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <3>;
 	};
 };
diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi
index c675257f23..f076ff856d 100644
--- a/dts/src/arm/armada-375.dtsi
+++ b/dts/src/arm/armada-375.dtsi
@@ -69,7 +69,7 @@
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
+			clock-frequency = <1000000000>;
 		};
 		/* 25 MHz reference crystal */
 		refclk: oscillator {
diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi
index ed2dd8ba40..218a2acd36 100644
--- a/dts/src/arm/armada-38x.dtsi
+++ b/dts/src/arm/armada-38x.dtsi
@@ -585,7 +585,7 @@
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
+			clock-frequency = <1000000000>;
 		};
 
 		/* 25 MHz reference crystal */
diff --git a/dts/src/arm/armada-39x.dtsi b/dts/src/arm/armada-39x.dtsi
index 0e85fc15ce..ecd1318109 100644
--- a/dts/src/arm/armada-39x.dtsi
+++ b/dts/src/arm/armada-39x.dtsi
@@ -502,7 +502,7 @@
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
+			clock-frequency = <1000000000>;
 		};
 	};
 };
diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts
index a2cf2154dc..fdd187c55a 100644
--- a/dts/src/arm/armada-xp-linksys-mamba.dts
+++ b/dts/src/arm/armada-xp-linksys-mamba.dts
@@ -95,6 +95,11 @@
 
 		internal-regs {
 
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
 			/* J10: VCC, NC, RX, NC, TX, GND  */
 			serial@12000 {
 				status = "okay";
diff --git a/dts/src/arm/dm816x.dtsi b/dts/src/arm/dm816x.dtsi
index de8427be83..289806adb3 100644
--- a/dts/src/arm/dm816x.dtsi
+++ b/dts/src/arm/dm816x.dtsi
@@ -382,7 +382,7 @@
 			ti,hwmods = "usb_otg_hs";
 
 			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401400 0x400
 				       0x47401000 0x200>;
 				reg-names = "mc", "control";
@@ -422,7 +422,7 @@
 			};
 
 			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";
diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts
index aae7efc09b..e6fa251e17 100644
--- a/dts/src/arm/dove-cubox.dts
+++ b/dts/src/arm/dove-cubox.dts
@@ -87,6 +87,7 @@
 
 		/* connect xtal input to 25MHz reference */
 		clocks = <&ref25>;
+		clock-names = "xtal";
 
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
diff --git a/dts/src/arm/exynos4412-trats2.dts b/dts/src/arm/exynos4412-trats2.dts
index 173ffa479a..792394dd0f 100644
--- a/dts/src/arm/exynos4412-trats2.dts
+++ b/dts/src/arm/exynos4412-trats2.dts
@@ -736,7 +736,7 @@
 
 			display-timings {
 				timing-0 {
-					clock-frequency = <0>;
+					clock-frequency = <57153600>;
 					hactive = <720>;
 					vactive = <1280>;
 					hfront-porch = <5>;
diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts
index 0788d08fb4..146e71118a 100644
--- a/dts/src/arm/exynos5420-peach-pit.dts
+++ b/dts/src/arm/exynos5420-peach-pit.dts
@@ -711,6 +711,7 @@
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts
index 412f41d626..02eb8b1537 100644
--- a/dts/src/arm/exynos5800-peach-pi.dts
+++ b/dts/src/arm/exynos5800-peach-pi.dts
@@ -674,6 +674,7 @@
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi
index 6951b66d1a..bc215e4b75 100644
--- a/dts/src/arm/imx27.dtsi
+++ b/dts/src/arm/imx27.dtsi
@@ -533,7 +533,7 @@
 
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x4000>;
+				reg = <0x1002b000 0x1000>;
 				interrupts = <50>;
 				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
 					 <&clks IMX27_CLK_FEC_AHB_GATE>;
diff --git a/dts/src/arm/omap3-devkit8000.dts b/dts/src/arm/omap3-devkit8000.dts
index 134d3f27a8..921de6605f 100644
--- a/dts/src/arm/omap3-devkit8000.dts
+++ b/dts/src/arm/omap3-devkit8000.dts
@@ -110,6 +110,8 @@
 	nand@0,0 {
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "sw";
 
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index 5c16145920..5f5e0f3d5b 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -832,8 +832,8 @@
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;
diff --git a/dts/src/arm/tegra124.dtsi b/dts/src/arm/tegra124.dtsi
index cf01c818b8..13cc7ca5e0 100644
--- a/dts/src/arm/tegra124.dtsi
+++ b/dts/src/arm/tegra124.dtsi
@@ -826,7 +826,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
+		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
@@ -838,6 +838,7 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
 		status = "disabled";
 	};
 
@@ -862,7 +863,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
+		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
@@ -874,7 +875,6 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
 		status = "disabled";
 	};
 
@@ -899,7 +899,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
+		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts
index 7a2aeacd62..107395c32d 100644
--- a/dts/src/arm/vexpress-v2p-ca15_a7.dts
+++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts
@@ -191,6 +191,7 @@
 		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
 	oscclk6a: oscclk6a {
diff --git a/dts/src/arm/vexpress-v2p-ca9.dts b/dts/src/arm/vexpress-v2p-ca9.dts
index 23662b5a5e..d949facba3 100644
--- a/dts/src/arm/vexpress-v2p-ca9.dts
+++ b/dts/src/arm/vexpress-v2p-ca9.dts
@@ -33,28 +33,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		A9_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
 		};
 
-		cpu@1 {
+		A9_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			next-level-cache = <&L2>;
 		};
 
-		cpu@2 {
+		A9_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			next-level-cache = <&L2>;
 		};
 
-		cpu@3 {
+		A9_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
@@ -170,6 +170,7 @@
 		compatible = "arm,pl310-cache";
 		reg = <0x1e00a000 0x1000>;
 		interrupts = <0 43 4>;
+		cache-unified;
 		cache-level = <2>;
 		arm,data-latency = <1 1 1>;
 		arm,tag-latency = <1 1 1>;
@@ -181,6 +182,8 @@
 			     <0 61 4>,
 			     <0 62 4>,
 			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
 	};
 
 	dcc {
diff --git a/dts/src/arm/zynq-7000.dtsi b/dts/src/arm/zynq-7000.dtsi
index a5cd2eda3e..9ea54b3dba 100644
--- a/dts/src/arm/zynq-7000.dtsi
+++ b/dts/src/arm/zynq-7000.dtsi
@@ -193,7 +193,7 @@
 		};
 
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
@@ -204,7 +204,7 @@
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi
index c138b95a83..351c95bda8 100644
--- a/dts/src/arm64/arm/juno-motherboard.dtsi
+++ b/dts/src/arm64/arm/juno-motherboard.dtsi
@@ -21,6 +21,20 @@
 			clock-output-names = "juno_mb:clk25mhz";
 		};
 
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "juno_mb:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "juno_mb:refclk32khz";
+		};
+
 		motherboard {
 			compatible = "arm,vexpress,v2p-p1", "simple-bus";
 			#address-cells = <2>;  /* SMB chipselect number and offset */
@@ -66,6 +80,15 @@
 				#size-cells = <1>;
 				ranges = <0 3 0 0x200000>;
 
+				v2m_sysctl: sysctl@020000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				};
+
 				mmci@050000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
@@ -106,16 +129,16 @@
 					compatible = "arm,sp804", "arm,primecell";
 					reg = <0x110000 0x10000>;
 					interrupts = <9>;
-					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
-					clock-names = "timclken1", "apb_pclk";
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
 				};
 
 				v2m_timer23: timer@120000 {
 					compatible = "arm,sp804", "arm,primecell";
 					reg = <0x120000 0x10000>;
 					interrupts = <9>;
-					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
-					clock-names = "timclken1", "apb_pclk";
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
 				};
 
 				rtc@170000 {
diff --git a/dts/src/arm64/mediatek/mt8173-evb.dts b/dts/src/arm64/mediatek/mt8173-evb.dts
index 43d54017b7..d0ab012fa3 100644
--- a/dts/src/arm64/mediatek/mt8173-evb.dts
+++ b/dts/src/arm64/mediatek/mt8173-evb.dts
@@ -16,7 +16,8 @@
 #include "mt8173.dtsi"
 
 / {
-	model = "mediatek,mt8173-evb";
+	model = "MediaTek MT8173 evaluation board";
+	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
 
 	aliases {
 		serial0 = &uart0;