svn_rev_002

Consider all boards containing it's own flash.c as unmaintained
and remove them.

1 files changed, 1 insertions, 1286 deletions

diff --git a/Makefile b/Makefile
index a973dffc52..91cbcae065 100644
--- a/Makefile
+++ b/Makefile
@@ -350,9 +350,6 @@ unconfig:
 canmb_config:	unconfig
 	@$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 
-cmi_mpc5xx_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
-
 PATI_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 
@@ -366,73 +363,12 @@ aev_config: unconfig
 BC3450_config:	unconfig
 	@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 
-cpci5200_config:  unconfig
-	@$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
-
 hmi1001_config:         unconfig
 	@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 
-Lite5200_config				\
-Lite5200_LOWBOOT_config			\
-Lite5200_LOWBOOT08_config		\
-icecube_5200_config			\
-icecube_5200_LOWBOOT_config		\
-icecube_5200_LOWBOOT08_config		\
-icecube_5200_DDR_config			\
-icecube_5200_DDR_LOWBOOT_config		\
-icecube_5200_DDR_LOWBOOT08_config	\
-icecube_5100_config:			unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ if [ "$(findstring DDR,$@)" ] ; \
-			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		  fi ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
-	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-		  echo "... with 8 MB flash only" ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
-	@[ -z "$(findstring DDR,$@)" ] || \
-		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
-		  echo "... DDR memory revision" ; \
-		}
-	@[ -z "$(findstring 5200,$@)" ] || \
-		{ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h ; \
-		  echo "... with MPC5200 processor" ; \
-		}
-	@[ -z "$(findstring 5100,$@)" ] || \
-		{ echo "#define CONFIG_MGT5100"		>>$(obj)include/config.h ; \
-		  echo "... with MGT5100 processor" ; \
-		}
-	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
-
 v38b_config: unconfig
 	@./mkconfig -a v38b ppc mpc5xxx v38b
 
-inka4x0_config:	unconfig
-	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
-
-lite5200b_config	\
-lite5200b_LOWBOOT_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@ >$(obj)include/config.h
-	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
-	@ echo "... DDR memory revision"
-	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
-	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
-	@ echo "... with MPC5200B processor"
-	@$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
-
 mcc200_config	\
 mcc200_SDRAM_config	\
 mcc200_highboot_config	\
@@ -482,28 +418,6 @@ prs200_highboot_DDR_config:	unconfig
 		}
 	@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 
-o2dnt_config:
-	@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
-
-pf5200_config:  unconfig
-	@$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
-
-PM520_config \
-PM520_DDR_config \
-PM520_ROMBOOT_config \
-PM520_ROMBOOT_DDR_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring DDR,$@)" ] || \
-		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
-		  echo "... DDR memory revision" ; \
-		}
-	@[ -z "$(findstring ROMBOOT,$@)" ] || \
-		{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		  echo "... booting from 8-bit flash" ; \
-		}
-	@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
-
 smmaco4_config: unconfig
 	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
@@ -611,315 +525,26 @@ AdderII_config  \
 	@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 	@$(MKCONFIG) -a Adder ppc mpc8xx adder
 
-ADS860_config     \
-FADS823_config    \
-FADS850SAR_config \
-MPC86xADS_config  \
-MPC885ADS_config  \
-FADS860T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
-
-AMX860_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
-
-c2mon_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
-
-CCM_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
-
-cogent_mpc8xx_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
-
-ELPT860_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
-
 EP88x_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 
-ESTEEM192E_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
-
-ETX094_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
-
-FLAGADM_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
-
-xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
-
-GEN860T_SC_config	\
-GEN860T_config: unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _SC,$@)" ] || \
-		{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
-		  echo "With reduced H/W feature set (SC)..." ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
-
-GENIETV_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
-
-GTH_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
-
-hermes_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
-
-HMI10_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
-
-IAD210_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
-
 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 
-ICU862_100MHz_config	\
-ICU862_config: unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _100MHz,$@)" ] || \
-		{ echo "#define CONFIG_100MHz"	>>$(obj)include/config.h ; \
-		  echo "... with 100MHz system clock" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
-
-IP860_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
-
-IVML24_256_config \
-IVML24_128_config \
-IVML24_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring IVML24_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_16M"	>>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_32M"	>>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_64M"	>>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
-
-IVMS8_256_config \
-IVMS8_128_config \
-IVMS8_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring IVMS8_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
-
 KUP4K_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 
 KUP4X_config    :       unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 
-LANTEC_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
-
-lwmon_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
-
-MBX_config	\
-MBX860T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
-
-MHPC_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
-
-MVS1_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1
-
-xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
-
-NETVIA_V2_config \
-NETVIA_config:		unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring NETVIA_config,$@)" ] || \
-		 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
-		  echo "... Version 1" ; \
-		 }
-	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
-		  echo "... Version 2" ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
-
-xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
-
-NETPHONE_V2_config \
-NETPHONE_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
-		 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
-
-xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
-
-NETTA_ISDN_6412_SWAPHOOK_config \
-NETTA_ISDN_SWAPHOOK_config \
-NETTA_6412_SWAPHOOK_config \
-NETTA_SWAPHOOK_config \
-NETTA_ISDN_6412_config \
-NETTA_ISDN_config \
-NETTA_6412_config \
-NETTA_config:		unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring ISDN_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -n "$(findstring ISDN_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring 6412_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -n "$(findstring 6412_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
-
-xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
-
-NETTA2_V2_config \
-NETTA2_config:		unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring NETTA2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
-
-NC650_Rev1_config \
-NC650_Rev2_config \
-CP850_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring CP850,$@)" ] || \
-		 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
-		   echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring Rev1,$@)" ] || \
-		 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
-		 }
-	@[ -z "$(findstring Rev2,$@)" ] || \
-		 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a NC650 ppc mpc8xx nc650
-
-NX823_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
-
-pcu_e_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
-
-QS850_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
-
-QS823_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
-
-QS860T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
-
 quantum_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
 
-R360MPI_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
-
-RBC823_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
-
-RPXClassic_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
-
-RPXlite_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
-
-RPXlite_DW_64_config		\
-RPXlite_DW_LCD_config		\
-RPXlite_DW_64_LCD_config	\
-RPXlite_DW_NVRAM_config		\
-RPXlite_DW_NVRAM_64_config      \
-RPXlite_DW_NVRAM_LCD_config	\
-RPXlite_DW_NVRAM_64_LCD_config  \
-RPXlite_DW_config:         unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _64,$@)" ] || \
-		{ echo "#define RPXlite_64MHz"		>>$(obj)include/config.h ; \
-		  echo "... with 64MHz system clock ..."; \
-		}
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		  echo "... with LCD display ..."; \
-		}
-	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		{ echo "#define  CFG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
-		  echo "... with ENV in NVRAM ..."; \
-		}
-	@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
-
-rmu_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
-
-RRvision_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
-
-RRvision_LCD_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
-
-SM850_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
-
 spc1920_config:
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
 
-SPD823TS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
-
 stxxtc_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
 
-svm_sc8xx_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
-
-SXNI855T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
-
 # EMK MPC8xx based modules
 TOP860_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
@@ -929,162 +554,26 @@ TOP860_config:		unconfig
 # and only 823 boards may have LCD support
 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
 
-FPS850L_config		\
-FPS860L_config		\
-NSCU_config		\
-TQM823L_config		\
-TQM823L_LCD_config	\
-TQM850L_config		\
-TQM855L_config		\
-TQM860L_config		\
-TQM862L_config		\
-TQM823M_config		\
-TQM850M_config		\
-TQM855M_config		\
-TQM860M_config		\
-TQM862M_config		\
-TQM866M_config		\
-TQM885D_config		\
-virtlab2_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		  echo "... with LCD display" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
-
-TTTech_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
-
 uc100_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
 
-v37_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
-
-wtk_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
-
 #########################################################################
 ## PPC4xx Systems
 #########################################################################
 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
 
-ADCIOP_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
-
 alpr_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
 
-AP1000_config:unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
-
-APC405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
-
-AR405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
-
-ASH405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
-
-bamboo_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
-
-bubinga_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
-
-CANBT_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
-
-CATcenter_config	\
-CATcenter_25_config	\
-CATcenter_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
-	@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
-	@[ -z "$(findstring _25,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
-		  echo "SysClk = 25MHz" ; \
-		}
-	@[ -z "$(findstring _33,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
-		  echo "SysClk = 33MHz" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
-
-CPCI2DP_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-
-CPCI405_config	\
-CPCI4052_config	\
-CPCI405DT_config	\
-CPCI405AB_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
-
-CPCI440_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
-CPCIISER4_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
-
-CRAYL1_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
-
 csb272_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
 
 csb472_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
 
-DASA_SIM_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
-
-DP405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
-
-DU405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
-
-ebony_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
-
-ERIC_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
-
-EXBITGEN_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
-
-G2000_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
-
-HH405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
-
-HUB405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
-
-JSE_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
-
 KAREF_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
 
-luan_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
-
 METROBOX_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
@@ -1097,68 +586,18 @@ MIP405T_config:	unconfig
 	@echo "Enable subset config for MIP405T"
 	@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
 
-ML2_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
-
 ml300_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
 
-ocotea_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
-
-OCRTC_config		\
-ORSG_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
-
 p3p440_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
 
-PCI405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
-
-pcs440ep_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
-
 PIP405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
 
-PLU405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
-
 PMC405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
 
-PPChameleonEVB_config		\
-PPChameleonEVB_BA_25_config	\
-PPChameleonEVB_ME_25_config	\
-PPChameleonEVB_HI_25_config	\
-PPChameleonEVB_BA_33_config	\
-PPChameleonEVB_ME_33_config	\
-PPChameleonEVB_HI_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring EVB_BA,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
-		  echo "... BASIC model" ; \
-		}
-	@[ -z "$(findstring EVB_ME,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
-		  echo "... MEDIUM model" ; \
-		}
-	@[ -z "$(findstring EVB_HI,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
-		  echo "... HIGH-END model" ; \
-		}
-	@[ -z "$(findstring _25,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
-		  echo "SysClk = 25MHz" ; \
-		}
-	@[ -z "$(findstring _33,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
-		  echo "SysClk = 33MHz" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
-
 rainier_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_RAINIER" > $(obj)include/config.h
@@ -1177,9 +616,6 @@ rainier_nand_config:	unconfig
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
-sbc405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
-
 sequoia_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc
 
@@ -1193,49 +629,16 @@ sequoia_nand_config:	unconfig
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
-sycamore_config:	unconfig
-	@echo "Configuring for sycamore board as subset of walnut..."
-	@$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc
-
-VOH405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
-
-VOM405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
-
-CMS700_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
-
-W7OLMC_config	\
-W7OLMG_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
-
-walnut_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc
-
-WUH405_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
-
-XPEDITE1K_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
-
 yosemite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc
 
 yellowstone_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc
 
-yucca_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
-
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
 
-Alaska8220_config	\
-Yukon8220_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
-
 sorcery_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
 
@@ -1244,131 +647,26 @@ sorcery_config:		unconfig
 #########################################################################
 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
 
-A3000_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
-
-barco_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x barco
-
-BMW_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
-
-CPC45_config	\
-CPC45_ROMBOOT_config:	unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
-	@cd $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		echo "... booting from 8-bit flash" ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		echo "... booting from 64-bit flash" ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
-
-CU824_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
-
-debris_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
-
 eXalion_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
 
-HIDDEN_DRAGON_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
-
 kvme080_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
 
-MOUSSE_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
-
-MUSENKI_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
-
-MVBLUE_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
-
-OXC_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
-
 PN62_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
 
-Sandpoint8240_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
-
-Sandpoint8245_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
-
-sbc8240_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
-
-SL8245_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
-
-utx8245_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
-
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
 
-atc_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
-
-cogent_mpc8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
-
-CPU86_config	\
-CPU86_ROMBOOT_config: unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
-	@cd $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		echo "... booting from 8-bit flash" ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		echo "... booting from 64-bit flash" ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
-
-CPU87_config	\
-CPU87_ROMBOOT_config: unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
-	@cd $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		echo "... booting from 8-bit flash" ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		echo "... booting from 64-bit flash" ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
-
 ep8248_config	\
 ep8248E_config	:	unconfig
 	@$(MKCONFIG) ep8248 ppc mpc8260 ep8248
 
-ep8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
-
 ep82xxm_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
 
-gw8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
-
-hymod_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
-
-IDS8247_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
-
-IPHASE4539_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
-
 ISPAN_config		\
 ISPAN_REVB_config:	unconfig
 	@mkdir -p $(obj)include
@@ -1377,99 +675,6 @@ ISPAN_REVB_config:	unconfig
 	fi
 	@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
 
-MPC8260ADS_config	\
-MPC8260ADS_lowboot_config	\
-MPC8260ADS_33MHz_config	\
-MPC8260ADS_33MHz_lowboot_config	\
-MPC8260ADS_40MHz_config	\
-MPC8260ADS_40MHz_lowboot_config	\
-MPC8272ADS_config	\
-MPC8272ADS_lowboot_config	\
-PQ2FADS_config		\
-PQ2FADS_lowboot_config		\
-PQ2FADS-VR_config	\
-PQ2FADS-VR_lowboot_config	\
-PQ2FADS-ZU_config	\
-PQ2FADS-ZU_lowboot_config	\
-PQ2FADS-ZU_66MHz_config	\
-PQ2FADS-ZU_66MHz_lowboot_config	\
-	:		unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mpc8260ads
-	$(if $(findstring PQ2FADS,$@), \
-	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
-	@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
-	$(if $(findstring MHz,$@), \
-	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
-	$(if $(findstring VR,$@), \
-	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
-		  echo "... with lowboot configuration" ; \
-		}
-	@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
-
-MPC8266ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
-
-# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
-PM825_config	\
-PM825_ROMBOOT_config	\
-PM825_BIGFLASH_config	\
-PM825_ROMBOOT_BIGFLASH_config	\
-PM826_config	\
-PM826_ROMBOOT_config	\
-PM826_BIGFLASH_config	\
-PM826_ROMBOOT_BIGFLASH_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring PM825_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"	>$(obj)include/config.h ; \
-	else \
-		>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "... booting from 8-bit flash" ; \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			echo "... with 32 MB Flash" ; \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-		fi; \
-	else \
-		echo "... booting from 64-bit flash" ; \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			echo "... with 32 MB Flash" ; \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-			echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
-		else \
-			echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
-		fi; \
-	fi
-	@$(MKCONFIG) -a PM826 ppc mpc8260 pm826
-
-PM828_config	\
-PM828_PCI_config	\
-PM828_ROMBOOT_config	\
-PM828_ROMBOOT_PCI_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring _PCI_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-		echo "... with PCI enabled" ; \
-	else \
-		>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "... booting from 8-bit flash" ; \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-	fi
-	@$(MKCONFIG) -a PM828 ppc mpc8260 pm828
-
-ppmc8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
-
 Rattler8248_config	\
 Rattler_config:		unconfig
 	@mkdir -p $(obj)include
@@ -1477,77 +682,9 @@ Rattler_config:		unconfig
 	@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
 	@$(MKCONFIG) -a Rattler ppc mpc8260 rattler
 
-RPXsuper_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
-
-rsdproto_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
-
-sacsng_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
-
-sbc8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
-
-SCM_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
-
-TQM8255_AA_config \
-TQM8260_AA_config \
-TQM8260_AB_config \
-TQM8260_AC_config \
-TQM8260_AD_config \
-TQM8260_AE_config \
-TQM8260_AF_config \
-TQM8260_AG_config \
-TQM8260_AH_config \
-TQM8260_AI_config \
-TQM8265_AA_config:  unconfig
-	@mkdir -p $(obj)include
-	@case "$@" in \
-	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
-	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
-	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
-	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
-	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	esac; \
-	>$(obj)include/config.h ; \
-	if [ "$${CTYPE}" != "MPC8260" ] ; then \
-		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
-	fi; \
-	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
-	echo "... with $${CFREQ}MHz system clock" ; \
-	if [ "$${CACHE}" == "yes" ] ; then \
-		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-		echo "... with L2 Cache support" ; \
-	else \
-		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-		echo "... without L2 Cache support" ; \
-	fi; \
-	if [ "$${BMODE}" == "60x" ] ; then \
-		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
-		echo "... with 60x Bus Mode" ; \
-	else \
-		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
-		echo "... without 60x Bus Mode" ; \
-	fi
-	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
-
 TQM8272_config: unconfig
 	@$(MKCONFIG) -a TQM8272 ppc mpc8260 tqm8272
 
-VoVPN-GW_66MHz_config	\
-VoVPN-GW_100MHz_config:		unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
-	@$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
-
 ZPC1900_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
 
@@ -1555,38 +692,9 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
-cobra5272_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
-
-EB+MCF-EV123_config :		unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@ >$(obj)include/config.h
-	@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EB+MCF-EV123_internal_config :	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@ >$(obj)include/config.h
-	@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-idmr_config :			unconfig
-	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
-
 M5271EVB_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
 
-M5272C3_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
-
-M5282EVB_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
-
-TASREG_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
-
 r5200_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
 
@@ -1634,27 +742,6 @@ MPC8349ITX_config:	unconfig
 MPC8540ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
 
-MPC8540EVAL_config \
-MPC8540EVAL_33_config \
-MPC8540EVAL_66_config \
-MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config:      unconfig
-	@mkdir -p $(obj)include
-	@echo "" >$(obj)include/config.h ; \
-	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "... 33 MHz PCI" ; \
-	else \
-		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-		echo -n "... 66 MHz PCI" ; \
-	fi ; \
-	if [ "$(findstring _slave_,$@)" ] ; then \
-		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
-		echo " slave" ; \
-	else \
-		echo " host" ; \
-	fi
-	@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
-
 MPC8560ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
 
@@ -1699,9 +786,6 @@ sbc8560_66_config:      unconfig
 	fi
 	@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
 
-stxgp3_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
-
 TQM8540_config		\
 TQM8541_config		\
 TQM8555_config		\
@@ -1729,12 +813,6 @@ MPC8641HPCN_config:    unconfig
 ## 74xx/7xx Systems
 #########################################################################
 
-AmigaOneG3SE_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
-
-BAB7xx_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
 CPCI750_config:        unconfig
 	@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
 
@@ -1744,16 +822,6 @@ DB64360_config:  unconfig
 DB64460_config:  unconfig
 	@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
 
-ELPPC_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
-
-EVB64260_config	\
-EVB64260_750CX_config:	unconfig
-	@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
-
-P3G4_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
-
 p3m750_config	\
 p3m7448_config:		unconfig
 	@mkdir -p $(obj)include
@@ -1764,16 +832,6 @@ p3m7448_config:		unconfig
 	fi
 	@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
 
-PCIPPC2_config \
-PCIPPC6_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
-
-ZUMA_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
-
-ppmc7xx_config: unconfig
-	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
-
 #========================================================================
 # ARM
 #========================================================================
@@ -1784,40 +842,15 @@ ppmc7xx_config: unconfig
 assabet_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm sa1100 assabet
 
-dnp1110_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
-
-gcplus_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
-
-lart_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm sa1100 lart
-
-shannon_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm sa1100 shannon
-
 #########################################################################
 ## ARM92xT Systems
 #########################################################################
 
-xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
-
 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
 
-xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
-
-at91rm9200dk_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
-
-cmc_pu2_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-
 csb637_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
 
-mp2usb_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
-
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -1848,113 +881,18 @@ cp1026_config: unconfig
 kb9202_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
 
-lpd7a400_config \
-lpd7a404_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
-
 mx1ads_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
 
-mx1fs2_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
-
-netstar_32_config	\
-netstar_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _32_,$@)" ] ; then \
-		echo "... 32MB SDRAM" ; \
-		echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \
-	else \
-		echo "... 64MB SDRAM" ; \
-		echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -a netstar arm arm925t netstar
-
 omap1510inn_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
 
 omap5912osk_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
 
-omap1610inn_config \
-omap1610inn_cs0boot_config \
-omap1610inn_cs3boot_config \
-omap1610inn_cs_autoboot_config \
-omap1610h2_config \
-omap1610h2_cs0boot_config \
-omap1610h2_cs3boot_config \
-omap1610h2_cs_autoboot_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
-		echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
-		echo "... configured for CS0 boot"; \
-	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
-		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
-		echo "... configured for CS_AUTO boot"; \
-	else \
-		echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
-		echo "... configured for CS3 boot"; \
-	fi;
-	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
-
-omap730p2_config \
-omap730p2_cs0boot_config \
-omap730p2_cs3boot_config :	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
-		echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
-		echo "... configured for CS0 boot"; \
-	else \
-		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
-		echo "... configured for CS3 boot"; \
-	fi;
-	@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
-
-sbc2410x_config: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-scb9328_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
-
-smdk2400_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
-
-smdk2410_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
-
 SX1_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
 
-# TRAB default configuration:	8 MB Flash, 32 MB RAM
-trab_config \
-trab_bigram_config \
-trab_bigflash_config \
-trab_old_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/trab
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _bigram,$@)" ] || \
-		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
-		  echo "... with 8 MB Flash, 32 MB RAM" ; \
-		}
-	@[ -z "$(findstring _bigflash,$@)" ] || \
-		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  echo "... with 16 MB Flash, 16 MB RAM" ; \
-		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
-		}
-	@[ -z "$(findstring _old,$@)" ] || \
-		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  echo "... with 8 MB Flash, 16 MB RAM" ; \
-		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
-
-VCMA9_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
-
 #========================================================================
 # ARM supplied Versatile development boards
 #========================================================================
@@ -1978,44 +916,14 @@ voiceblue_config:	unconfig
 	fi
 	@$(MKCONFIG) -a voiceblue arm arm925t voiceblue
 
-cm4008_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
-
-cm41xx_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-
-gth2_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a gth2 mips mips gth2
-
 #########################################################################
 ## S3C44B0 Systems
 #########################################################################
 
-B2_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
-
 #########################################################################
 ## ARM720T Systems
 #########################################################################
 
-armadillo_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t armadillo
-
-ep7312_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t ep7312
-
-impa7_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t impa7
-
-modnet50_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
-
-evb4510_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
-
 #########################################################################
 ## XScale Systems
 #########################################################################
@@ -2023,62 +931,15 @@ evb4510_config :	unconfig
 adsvix_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm pxa adsvix
 
-cerf250_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa cerf250
-
-cradle_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa cradle
-
-csb226_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa csb226
-
 delta_config :
 	@$(MKCONFIG) $(@:_config=) arm pxa delta
 
-innokom_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa innokom
-
-ixdp425_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-ixdpg425_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-lubbock_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa lubbock
-
-pleb2_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa pleb2
-
-logodl_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa logodl
-
-pdnb3_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive
-
 pxa255_idp_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
 
-wepep250_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa wepep250
-
-xaeniax_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa xaeniax
-
-xm250_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa xm250
-
-xsengine_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa xsengine
-
-zylonite_config :
-	@$(MKCONFIG) $(@:_config=) arm pxa zylonite
-
 #########################################################################
 ## ARM1136 Systems
 #########################################################################
-omap2420h4_config :    unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
 
 #========================================================================
 # i386
@@ -2086,14 +947,6 @@ omap2420h4_config :    unconfig
 #########################################################################
 ## AMD SC520 CDP
 #########################################################################
-sc520_cdp_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
-
-sc520_spunk_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
-
-sc520_spunk_rel_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
 
 #========================================================================
 # MIPS
@@ -2102,77 +955,14 @@ sc520_spunk_rel_config	:	unconfig
 ## MIPS32 4Kc
 #########################################################################
 
-xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
-
-incaip_100MHz_config	\
-incaip_133MHz_config	\
-incaip_150MHz_config	\
-incaip_config: unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _100MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
-		  echo "... with 100MHz system clock" ; \
-		}
-	@[ -z "$(findstring _133MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
-		  echo "... with 133MHz system clock" ; \
-		}
-	@[ -z "$(findstring _150MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
-		  echo "... with 150MHz system clock" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
-
-tb0229_config: unconfig
-	@$(MKCONFIG) $(@:_config=) mips mips tb0229
-
 #########################################################################
 ## MIPS32 AU1X00
 #########################################################################
-dbau1000_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1100_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1500_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1550_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1550_el_config	:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-pb1000_config		:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
-	@$(MKCONFIG) -a pb1x00 mips mips pb1x00
 
 #########################################################################
 ## MIPS64 5Kc
 #########################################################################
 
-purple_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) mips mips purple
-
 #========================================================================
 # Nios
 #========================================================================
@@ -2180,68 +970,6 @@ purple_config :		unconfig
 ## Nios32
 #########################################################################
 
-DK1C20_safe_32_config		\
-DK1C20_standard_32_config	\
-DK1C20_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'safe_32' configuration" ; \
-		}
-	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'standard_32' configuration" ; \
-		}
-	@[ -z "$(findstring DK1C20_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
-
-DK1S10_safe_32_config		\
-DK1S10_standard_32_config	\
-DK1S10_mtx_ldk_20_config	\
-DK1S10_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'safe_32' configuration" ; \
-		}
-	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'standard_32' configuration" ; \
-		}
-	@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'mtx_ldk_20' configuration" ; \
-		}
-	@[ -z "$(findstring DK1S10_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
-
-ADNPESC1_DNPEVA2_base_32_config	\
-ADNPESC1_base_32_config		\
-ADNPESC1_config: unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring _DNPEVA2,$@)" ] || \
-		{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
-		  echo "... DNP/EVA2 configuration" ; \
-		}
-	@[ -z "$(findstring _base_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'base_32' configuration" ; \
-		}
-	@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
-
 #########################################################################
 ## Nios-II
 #########################################################################
@@ -2267,17 +995,10 @@ PCI5441_config : unconfig
 #########################################################################
 ## Microblaze
 #########################################################################
-suzaku_config:	unconfig
-	@mkdir -p $(obj)include
-	@ >$(obj)include/config.h
-	@echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 #########################################################################
 ## Blackfin
 #########################################################################
-ezkit533_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
 
 stamp_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
@@ -2292,9 +1013,6 @@ dspstamp_config	:	unconfig
 ## AT32AP7xxx
 #########################################################################
 
-atstk1002_config	:	unconfig
-	@./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
-
 #########################################################################
 #########################################################################
 #########################################################################
@@ -2315,10 +1033,7 @@ clean:
 	rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
 	rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
 	rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv
-	rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image
-	rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit
-	rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
-	rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
+	rm -f $(obj)board/voiceblue/eeprom
 	rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
 	rm -f $(obj)include/bmp_logo.h
 	rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map