path: root/arch/arm/boards/Makefile
diff options
authorAlexander Kurz <>2016-07-09 15:09:44 +0200
committerSascha Hauer <>2016-07-11 07:51:44 +0200
commit4f0abb8db08b4970e9d58d79947638f8e298fcf6 (patch)
treeca3b9302c69793d84148e36ff22eb4e39f63ad58 /arch/arm/boards/Makefile
parenta157195b73752c9fa73938588177bd4d211ab9c4 (diff)
ARM i.MX35: Add support for the Amazon Kindle3
The Amazon Model No. D00901 Kindle3 is an E-Book reader based on the i.MX35 SOC. The device boots in internal boot mode from a build-in eMMC, alternatively the device may be set into USB-downloader mode when the Vol+ key is pressed on startup. Add support for this device and make barebox a drop-in replacement for the factory shipped u-boot image. Constraints for the use as drop-in replacement: - imximg header (offset 0x400) has a maximum size of 2kB minus 16 byte since the last 16 bytes are used to store a vendor specific hardware desctription identifier - the bootloader space (application plus env) is limited to 256kB minus 16 bytes when installed with offset of 4kB (the u-boot offset was 3kB). A vendor specific device identifier is stored in the gap between application and kernel. The vendor specific identifiers should not be overwritten. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard) - Full support for vendor specific ATAGs - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <> Signed-off-by: Sascha Hauer <>
Diffstat (limited to 'arch/arm/boards/Makefile')
1 files changed, 1 insertions, 0 deletions
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 9241b66..480ae8b 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_HIGHBANK) += highbank/
obj-$(CONFIG_MACH_IMX21ADS) += freescale-mx21-ads/
obj-$(CONFIG_MACH_IMX233_OLINUXINO) += imx233-olinuxino/
obj-$(CONFIG_MACH_IMX27ADS) += freescale-mx27-ads/
+obj-$(CONFIG_MACH_KINDLE3) += kindle3/
obj-$(CONFIG_MACH_LENOVO_IX4_300D) += lenovo-ix4-300d/
obj-$(CONFIG_MACH_LUBBOCK) += lubbock/
obj-$(CONFIG_MACH_MAINSTONE) += mainstone/