diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2014-06-17 10:27:03 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2014-06-26 10:09:52 +0200 |
commit | 98360be0fefd58bf27df03c47d887dd676a31d73 (patch) | |
tree | 76447f0ee3d99f3864bdfb9952178affb5dc9f76 /arch/arm/boards/karo-tx28 | |
parent | 7b82f548580fb52023ed2116784632fd996a51fc (diff) | |
download | barebox-98360be0fefd58bf27df03c47d887dd676a31d73.tar.gz barebox-98360be0fefd58bf27df03c47d887dd676a31d73.tar.xz |
Documentation: remove doxygen documentation
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch/arm/boards/karo-tx28')
-rw-r--r-- | arch/arm/boards/karo-tx28/tx28.c | 52 |
1 files changed, 0 insertions, 52 deletions
diff --git a/arch/arm/boards/karo-tx28/tx28.c b/arch/arm/boards/karo-tx28/tx28.c index 3fb1fe9177..26dbc00790 100644 --- a/arch/arm/boards/karo-tx28/tx28.c +++ b/arch/arm/boards/karo-tx28/tx28.c @@ -99,55 +99,3 @@ static int tx28_devices_init(void) } device_initcall(tx28_devices_init); - -/** -@page tx28 KARO's TX28 CPU module - -@section tx28_cpu_card The CPU module - -http://www.karo-electronics.de/ - -This CPU card is based on a Freescale i.MX28 CPU. The card is shipped with: - -- 128 MiB synchronous dynamic RAM (DDR2 type), 200 MHz support -- 128 MiB NAND K9F1G08U0A (3.3V type) -- PCA9554 GPIO expander -- DS1339 RTC -- LAN8710 Phy - -@section tx28_basboards Supported baseboards - -Supported baseboards are: -- KARO's Starterkit 5 - -@section tx28_stk5_howto How to get barebox for 'KARO's Starterkit 5' - -Using the default configuration: - -@verbatim -make ARCH=arm tx28stk5_defconfig -@endverbatim - -Build the binary image: - -@verbatim -make ARCH=arm CROSS_COMPILE=armv5compiler -@endverbatim - -@note replace the armv5compiler with your ARM v5 cross compiler. - -@note To use the result, you also need the following resources from Freescale: -- the 'bootlets' archive -- the 'elftosb2' encryption tool -- in the case you want to start @b barebox from an attached SD card the - 'sdimage' tool from Freescale's 'uuc' archive. - -@section tx28_mlayout Memory layout when barebox is running: - -- 0x40000000 start of SDRAM -- 0x40000100 start of kernel's boot parameters - - below malloc area: stack area - - below barebox: malloc area -- 0x47000000 start of @b barebox - -*/ |