move boards to arch/<architecure>/boards

this will allow each arch to handle the boards more simply and depending on
there need

the env var BOARD will refer to the current board dirent

for sandbox as we have only one board the board dirent is arch/sandbox/board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 126 insertions, 0 deletions

diff --git a/arch/arm/boards/pm9263/config.h b/arch/arm/boards/pm9263/config.h
new file mode 100644
index 0000000000..9a9c5cdcb7
--- /dev/null
+++ b/arch/arm/boards/pm9263/config.h
@@ -0,0 +1,126 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MASTER_CLOCK  99328000        /* peripheral = main / 2 */
+
+#define MASTER_PLL_DIV		6
+#define MASTER_PLL_MUL		65
+#define MAIN_PLL_DIV		2	/* 2 or 4 */
+
+/* clocks */
+#define CONFIG_SYS_MOR_VAL						\
+		(AT91_PMC_MOSCEN |					\
+		 (255 << 8))		/* Main Oscillator Start-up Time */
+#define CONFIG_SYS_PLLAR_VAL						\
+		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
+		 AT91_PMC_OUT |						\
+		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
+		 (2 << 28) |		/* PLL Clock Frequency Range */	\
+		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+#if (MAIN_PLL_DIV == 2)
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR1_VAL		\
+		(AT91_PMC_CSS_SLOW |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR2_VAL		\
+		(AT91_PMC_CSS_PLLA |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+#else
+/* PCK/4 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR1_VAL			\
+		(AT91_PMC_CSS_SLOW |		\
+		 AT91_PMC_PRES_1 |		\
+		 AT91RM9200_PMC_MDIV_3 |	\
+		 AT91_PMC_PDIV_1)
+/* PCK/4 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR2_VAL			\
+		(AT91_PMC_CSS_PLLA |		\
+		 AT91_PMC_PRES_1 |		\
+		 AT91RM9200_PMC_MDIV_3 |	\
+		 AT91_PMC_PDIV_1)
+#endif
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
+/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
+	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
+	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1		0
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1		0x3AA
+/* SDRAMC_CR - Configuration register*/
+#define CONFIG_SYS_SDRC_CR_VAL							\
+		(AT91_SDRAMC_NC_9 |						\
+		 AT91_SDRAMC_NR_13 |						\
+		 AT91_SDRAMC_NB_4 |						\
+		 AT91_SDRAMC_CAS_2 |						\
+		 AT91_SDRAMC_DBW_32 |						\
+		 (2 <<  8) |	/* tWR -  Write Recovery Delay */		\
+		 (7 << 12) |	/* tRC -  Row Cycle Delay */			\
+		 (2 << 16) |	/* tRP -  Row Precharge Delay */		\
+		 (2 << 20) |	/* tRCD - Row to Column Delay */		\
+		 (5 << 24) |	/* tRAS - Active to Precharge Delay */		\
+		 (8 << 28))	/* tXSR - Exit Self Refresh to Active Delay */
+
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL					\
+		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
+		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL					\
+		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
+		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
+		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL				\
+		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
+		 AT91_SMC_DBW_16 |				\
+		 AT91_SMC_TDFMODE |				\
+		 AT91_SMC_TDF_(6))
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL			\
+		(AT91_RSTC_KEY |		\
+		AT91_RSTC_PROCRST |		\
+		AT91_RSTC_RSTTYP_WAKEUP |	\
+		AT91_RSTC_RSTTYP_WATCHDOG)
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL				\
+		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
+		 AT91_WDT_WDV |					\
+		 AT91_WDT_WDDIS |				\
+		 AT91_WDT_WDD)
+
+
+#endif	/* __CONFIG_H */