ARM: at91: allow to pass the interface id to at91_add_device_eth

On the sam9x5 series we now support 1 or 2 macb.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

10 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/boards/at91rm9200ek/init.c b/arch/arm/boards/at91rm9200ek/init.c
index 9a46ac6ba4..6911447aaf 100644
--- a/arch/arm/boards/at91rm9200ek/init.c
+++ b/arch/arm/boards/at91rm9200ek/init.c
@@ -114,7 +114,7 @@ static int at91rm9200ek_devices_init(void)
 	 */
 	at91_set_gpio_output(AT91_PIN_PA23, 1);
 
-	at91_add_device_eth(&ether_pdata);
+	at91_add_device_eth(0, &ether_pdata);
 
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 0, 0);
 	/* USB Host */
diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 03abc0e3fc..a1d37507af 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -254,7 +254,7 @@ static int at91sam9260ek_devices_init(void)
 {
 	ek_add_device_nand();
 	at91sam9260ek_phy_reset();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	at91_add_device_udc(&ek_udc_data);
 	ek_usb_add_device_mci();
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index 4a8d1678b6..33b7955edb 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -183,7 +183,7 @@ static int at91sam9263ek_devices_init(void)
 	at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
 
 	ek_add_device_nand();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 8 * 1024 * 1024, 0);
 	ek_add_device_mci();
 	ek_device_add_leds();
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 8371376e91..6011bad2f6 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -175,7 +175,7 @@ mem_initcall(at91sam9m10g45ek_mem_init);
 static int at91sam9m10g45ek_devices_init(void)
 {
 	ek_add_device_nand();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	ek_add_device_mci();
 	ek_device_add_leds();
 
diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
index 722c0f6b07..950cf763e9 100644
--- a/arch/arm/boards/dss11/init.c
+++ b/arch/arm/boards/dss11/init.c
@@ -131,7 +131,7 @@ static int dss11_devices_init(void)
 {
 	dss11_add_device_nand();
 	dss11_phy_reset();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	at91_add_device_mci(0, &dss11_mci_data);
 	at91_add_device_usbh_ohci(&dss11_usbh_data);
 
diff --git a/arch/arm/boards/mmccpu/init.c b/arch/arm/boards/mmccpu/init.c
index 51dbf24621..9d4d496521 100644
--- a/arch/arm/boards/mmccpu/init.c
+++ b/arch/arm/boards/mmccpu/init.c
@@ -60,7 +60,7 @@ static int mmccpu_devices_init(void)
 	at91_set_gpio_output(AT91_PIN_PB27, 1);
 	at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
 
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 0, 0);
 
 	devfs_add_partition("nor0", 0x00000, 256 * 1024, PARTITION_FIXED, "self0");
diff --git a/arch/arm/boards/pm9263/init.c b/arch/arm/boards/pm9263/init.c
index 92d7e9f166..499ee466e4 100644
--- a/arch/arm/boards/pm9263/init.c
+++ b/arch/arm/boards/pm9263/init.c
@@ -108,7 +108,7 @@ static int pm9263_devices_init(void)
 	at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
 
 	pm_add_device_nand();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 4 * 1024 * 1024, 0);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 4d3078e999..9b2227647a 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -138,7 +138,7 @@ static int pm9g45_devices_init(void)
 	pm_add_device_nand();
 	pm9g45_add_device_mci();
 	pm9g45_phy_init();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	pm9g45_add_device_usbh();
 
 	devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
index ad77f7bfb1..2065eae985 100644
--- a/arch/arm/boards/tny-a926x/init.c
+++ b/arch/arm/boards/tny-a926x/init.c
@@ -156,7 +156,7 @@ static void tny_a9260_phy_reset(void)
 static void __init ek_add_device_macb(void)
 {
 	tny_a9260_phy_reset();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 }
 #else
 static void __init ek_add_device_macb(void) {}
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index af025b414e..57609b1818 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -320,7 +320,7 @@ static int usb_a9260_devices_init(void)
 {
 	usb_a9260_add_device_nand();
 	usb_a9260_phy_reset();
-	at91_add_device_eth(&macb_pdata);
+	at91_add_device_eth(0, &macb_pdata);
 	usb_a9260_add_device_mci();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_device_udc();