diff options
author | Ahmad Fatoum <a.fatoum@pengutronix.de> | 2021-10-01 12:09:49 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2021-10-05 09:05:37 +0200 |
commit | 35d4cf996034badd45b80c9fcd61e53036786421 (patch) | |
tree | 71b9cb0a3b2b9b893bd1aec03f8f752bf24e798f /arch/arm/mach-imx | |
parent | c4d8f7744687100abcc0b45e7e2ff1af2b681537 (diff) | |
download | barebox-35d4cf996034badd45b80c9fcd61e53036786421.tar.gz barebox-35d4cf996034badd45b80c9fcd61e53036786421.tar.xz |
ARM: i.MX8MN: add i.MX8MN-EVK support
With driver support in place, we can now build and run barebox in the
i.MX8MN. Following tested working:
- Setting up DDR4 SDRAM
- Booting from SD-Card
- Booting from eMMC
- Updating barebox in SD-Card/eMMC boot partition
- USB Fastboot, ACM gadgets
- UART
- Early I2C with bd71837
- Ethernet
- Loading and communicating with TF-A
The resulting image supports both DDR4 and LPDDR4. They use different
PMICs, so probing the i2c addresses of them indicates what DRAM type
to setup. I have only tested this on a DDR4 EVK, but the LPDDR4 code
is equivalent to what's already used in barebox with i.MX8M Mini
and Plus, so it should work(tm).
Notably missing:
- boot from USB SDP doesn't work. early debug_ll doesn't indicate
that barebox PBL was actually entered.
This can follow later though.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.barebox.org/20211001100949.6891-9-a.fatoum@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 959b934b6a..92db011bae 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -558,6 +558,18 @@ config MACH_NXP_IMX8MM_EVK select I2C_IMX_EARLY select USB_GADGET_DRIVER_ARC_PBL +config MACH_NXP_IMX8MN_EVK + bool "NXP i.MX8MN EVK Board" + select ARCH_IMX8MN + select FIRMWARE_IMX_LPDDR4_PMU_TRAIN + select FIRMWARE_IMX_DDR4_PMU_TRAIN + select FIRMWARE_IMX8MN_ATF + select ARM_SMCCC + select MCI_IMX_ESDHC_PBL + select IMX8M_DRAM + select I2C_IMX_EARLY + select ARM_USE_COMPRESSED_DTB + config MACH_NXP_IMX8MP_EVK bool "NXP i.MX8MP EVK Board" select ARCH_IMX8MP |