summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorAhmad Fatoum <a.fatoum@pengutronix.de>2020-04-24 18:01:09 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2020-04-28 09:46:19 +0200
commit070db2f8886f859b58506bb48e0c6bb7f41fe9d2 (patch)
tree246bb57e250384a63998bdfc6cdde319661ec0f4 /arch
parent15d46bac2280def447c7fd74686d44d938c24556 (diff)
downloadbarebox-070db2f8886f859b58506bb48e0c6bb7f41fe9d2.tar.gz
barebox-070db2f8886f859b58506bb48e0c6bb7f41fe9d2.tar.xz
ARM: stm32mp: add Linux Automation MC-1 support
This adds support for the Linux Automation GmbH MC-1 board built around the Octavo Systems OSD32MP157C-512M SiP. The device tree is based on the one in linux-stm32/stm32-next, which will probably be merged for Linux v5.8-rc1. Instead of waiting that long, we import it here with some stuff removed/changed, so it's usable for both barebox and Linux, without the prerequisite patches. The non-barebox specific parts have been moved into separate DTSIs (arch/arm/dts/stm32mp{157c-lxa-mc1,15xx-osd32}.dtsi), so both can be dropped after the v5.8-rc1 sync with only include path change necessary in arch/arm/dts/stm32mp157c-lxa-mc1.dts. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boards/Makefile1
-rw-r--r--arch/arm/boards/lxa-mc1/Makefile2
-rw-r--r--arch/arm/boards/lxa-mc1/board.c31
-rw-r--r--arch/arm/boards/lxa-mc1/lowlevel.c26
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/stm32mp157c-lxa-mc1.dts44
-rw-r--r--arch/arm/dts/stm32mp157c-lxa-mc1.dtsi362
-rw-r--r--arch/arm/dts/stm32mp15xx-osd32.dtsi229
-rw-r--r--arch/arm/mach-stm32mp/Kconfig4
9 files changed, 700 insertions, 0 deletions
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 9fe458e0a3..e9e9163d58 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -129,6 +129,7 @@ obj-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += terasic-sockit/
obj-$(CONFIG_MACH_SOLIDRUN_CUBOX) += solidrun-cubox/
obj-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += solidrun-microsom/
obj-$(CONFIG_MACH_STM32MP157C_DK2) += stm32mp157c-dk2/
+obj-$(CONFIG_MACH_LXA_MC1) += lxa-mc1/
obj-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += technexion-pico-hobbit/
obj-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += technexion-wandboard/
obj-$(CONFIG_MACH_TNY_A9260) += tny-a926x/
diff --git a/arch/arm/boards/lxa-mc1/Makefile b/arch/arm/boards/lxa-mc1/Makefile
new file mode 100644
index 0000000000..092c31d6b2
--- /dev/null
+++ b/arch/arm/boards/lxa-mc1/Makefile
@@ -0,0 +1,2 @@
+lwl-y += lowlevel.o
+obj-y += board.o
diff --git a/arch/arm/boards/lxa-mc1/board.c b/arch/arm/boards/lxa-mc1/board.c
new file mode 100644
index 0000000000..d36924fc27
--- /dev/null
+++ b/arch/arm/boards/lxa-mc1/board.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <linux/sizes.h>
+#include <init.h>
+#include <asm/memory.h>
+#include <mach/bbu.h>
+#include <bootsource.h>
+
+static int mc1_device_init(void)
+{
+ int flags;
+ if (!of_machine_is_compatible("lxa,stm32mp157c-mc1"))
+ return 0;
+
+ flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ stm32mp_bbu_mmc_register_handler("sd", "/dev/mmc0.ssbl", flags);
+
+ flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ stm32mp_bbu_mmc_register_handler("emmc", "/dev/mmc1.ssbl", flags);
+
+
+ if (bootsource_get_instance() == 0)
+ of_device_enable_path("/chosen/environment-sd");
+ else
+ of_device_enable_path("/chosen/environment-emmc");
+
+ barebox_set_hostname("lxa-mc1");
+
+ return 0;
+}
+device_initcall(mc1_device_init);
diff --git a/arch/arm/boards/lxa-mc1/lowlevel.c b/arch/arm/boards/lxa-mc1/lowlevel.c
new file mode 100644
index 0000000000..274f824a16
--- /dev/null
+++ b/arch/arm/boards/lxa-mc1/lowlevel.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <mach/entry.h>
+#include <debug_ll.h>
+
+extern char __dtb_z_stm32mp157c_lxa_mc1_start[];
+
+static void setup_uart(void)
+{
+ /* first stage has set up the UART, so nothing to do here */
+ putc_ll('>');
+}
+
+ENTRY_FUNCTION(start_stm32mp157c_lxa_mc1, r0, r1, r2)
+{
+ void *fdt;
+
+ stm32mp_cpu_lowlevel_init();
+
+ if (IS_ENABLED(CONFIG_DEBUG_LL))
+ setup_uart();
+
+ fdt = __dtb_z_stm32mp157c_lxa_mc1_start + get_runtime_offset();
+
+ stm32mp1_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ddfe64e83b..1aeaa61e01 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -94,6 +94,7 @@ lwl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-humm
imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \
imx6q-h100.dtb.o
lwl-dtb-$(CONFIG_MACH_STM32MP157C_DK2) += stm32mp157c-dk2.dtb.o
+lwl-dtb-$(CONFIG_MACH_LXA_MC1) += stm32mp157c-lxa-mc1.dtb.o
lwl-dtb-$(CONFIG_MACH_SCB9328) += imx1-scb9328.dtb.o
lwl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o
lwl-dtb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += imx6ul-pico-hobbit.dtb.o
diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
new file mode 100644
index 0000000000..57baaf4005
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include "stm32mp157c-lxa-mc1.dtsi"
+#include "stm32mp151.dtsi"
+
+/ {
+ chosen {
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &sdmmc1, "partname:barebox-environment";
+ status = "disabled";
+ };
+
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &sdmmc2, "partname:barebox-environment";
+ status = "disabled";
+ };
+ };
+
+};
+
+&panel {
+ display-timings {
+ timing { /* edt,etm0700g0dh6 */
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hsync-len = <128>;
+ hback-porch = <88>;
+ vfront-porch = <10>;
+ vsync-len = <2>;
+ vback-porch = <33>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi b/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
new file mode 100644
index 0000000000..6603cf280e
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
@@ -0,0 +1,362 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <arm/stm32mp157.dtsi>
+#include "stm32mp15xx-osd32.dtsi"
+#include <arm/stm32mp15xxac-pinctrl.dtsi>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Linux Automation MC-1 board";
+ compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = &ethernet0;
+ mmc0 = &sdmmc1;
+ mmc1 = &sdmmc2;
+ serial0 = &uart4;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 31 63 95 127 159 191 223 255>;
+ default-brightness-level = <7>;
+ power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ led-act {
+ compatible = "gpio-leds";
+
+ led-green {
+ label = "mc1:green:act";
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ led-rgb {
+ compatible = "pwm-leds";
+
+ led-red {
+ label = "mc1:red:rgb";
+ pwms = <&leds_pwm 1 1000000 0>;
+ max-brightness = <255>;
+ active-low;
+ };
+
+ led-green {
+ label = "mc1:green:rgb";
+ pwms = <&leds_pwm 2 1000000 0>;
+ max-brightness = <255>;
+ active-low;
+ };
+
+ led-blue {
+ label = "mc1:blue:rgb";
+ pwms = <&leds_pwm 3 1000000 0>;
+ max-brightness = <255>;
+ active-low;
+ };
+ };
+
+ panel: panel {
+ compatible = "edt,etm0700g0edh6", "simple-panel";
+ backlight = <&backlight>;
+ enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+ };
+
+ reg_3v3: regulator_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&v3v3>;
+ };
+
+ /* supplied by either debug board or PoE */
+ reg_5v2: regulator_5v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V2";
+ regulator-min-microvolt = <5200000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-always-on;
+ };
+};
+
+&ethernet0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet0_rgmii_mc1pins_b>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy>;
+ status = "okay";
+
+ mdio0 {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@3 { /* KSZ9031RN */
+ reg = <3>;
+ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+ interrupt-parent = <&gpioa>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
+ rxc-skew-ps = <1860>;
+ txc-skew-ps = <1860>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ micrel,force-master;
+ };
+ };
+};
+
+&gpioz {
+ gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
+ "HWID4", "HWID5";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_mc1pins_b>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ interrupt-parent = <&gpiod>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
+ vcc-supply = <&reg_3v3>;
+ reg = <0x38>;
+ reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
+ touchscreen-size-x = <1792>;
+ touchscreen-size-y = <1024>;
+ wakeup-source;
+ };
+};
+
+&ltdc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ltdc_mc1pins_c>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
+
+&pmic {
+ regulators {
+ buck4-supply = <&reg_5v2>; /* VIN */
+ ldo2-supply = <&reg_5v2>; /* PMIC_LDO25IN */
+ ldo5-supply = <&reg_5v2>; /* PMIC_LDO25IN */
+ boost-supply = <&reg_5v2>; /* PMIC_BSTIN */
+ pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ bus-width = <4>;
+ cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-1-8-v;
+ st,neg-edge;
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+ /*
+ * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
+ * work, thus enable internal pull-ups.
+ */
+ pins1 {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ };
+ pins2 {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ };
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>;
+ bus-width = <8>;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ st,neg-edge;
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&timers3 {
+ status = "okay";
+
+ backlight_pwm: pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_mc1pins_b>;
+ status = "okay";
+ };
+};
+
+&timers5 {
+ status = "okay";
+
+ leds_pwm: pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5_mc1pins_b>;
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&pinctrl {
+ ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ i2c5_mc1pins_b: mc1-i2c5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ ltdc_mc1pins_c: mc1-ltdc-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 1, AF9)>, /* LTDC_R6 */
+ <STM32_PINMUX('B', 9, AF14)>, /* LTDC_B7 */
+ <STM32_PINMUX('C', 0, AF14)>, /* LTDC_R5 */
+ <STM32_PINMUX('D', 3, AF14)>, /* LTDC_G7 */
+ <STM32_PINMUX('D', 6, AF14)>, /* LTDC_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+ <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
+ <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+ <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+ <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+ <STM32_PINMUX('H', 4, AF9)>, /* LTDC_G5 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
+ <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
+ <STM32_PINMUX('I', 6, AF14)>, /* LTDC_B6 */
+ <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
+ <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ pwm3_mc1pins_b: mc1-pwm3-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm5_mc1pins_b: mc1-pwm5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
+ <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
+ <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+};
diff --git a/arch/arm/dts/stm32mp15xx-osd32.dtsi b/arch/arm/dts/stm32mp15xx-osd32.dtsi
new file mode 100644
index 0000000000..8750835033
--- /dev/null
+++ b/arch/arm/dts/stm32mp15xx-osd32.dtsi
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include <arm/stm32mp15-pinctrl.dtsi>
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ reg_sip_eeprom: regulator_eeprom {
+ compatible = "regulator-fixed";
+ regulator-name = "sip_eeprom";
+ regulator-always-on;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ };
+
+ pmic_watchdog: watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+
+ sip_eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ vcc-supply = <&reg_sip_eeprom>;
+ reg = <0x50>;
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 9b55a3d218..6e816ef9d1 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -12,4 +12,8 @@ config MACH_STM32MP157C_DK2
select ARCH_STM32MP157
bool "STM32MP157C-DK2 board"
+config MACH_LXA_MC1
+ select ARCH_STM32MP157
+ bool "Linux Automation MC-1 board"
+
endif