[general] Move include/configs/* to board/*/config.h

14 files changed, 695 insertions, 0 deletions

diff --git a/board/eco920/config.h b/board/eco920/config.h
new file mode 100644
index 0000000000..c023517719
--- /dev/null
+++ b/board/eco920/config.h
@@ -0,0 +1,142 @@
+/*
+ * (C) Copyright 2007 Pengutronix
+ * Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
+#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
+/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define USE_920T_MMU		1
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CFG_USE_MAIN_OSCILLATOR		1
+/* flash */
+#define MC_PUIA_VAL	0x00000000
+#define MC_PUP_VAL	0x00000000
+#define MC_PUER_VAL	0x00000000
+#define MC_ASR_VAL	0x00000000
+#define MC_AASR_VAL	0x00000000
+#define EBI_CFGR_VAL	0x00000000
+#define SMC2_CSR_VAL	0x00003287
+
+/* clocks */
+#define PLLAR_VAL	0x2026be04
+#define PLLBR_VAL	0x10483e0e
+#define MCKR_VAL	0x00000202
+
+/* sdram */
+#define PIOC_ASR_VAL	0xffff0000
+#define PIOC_BSR_VAL	0x00000000
+#define PIOC_PDR_VAL	0xffff0000
+#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
+#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
+#define SDRAM		0x20000000 /* address of the SDRAM */
+#define SDRAM1		0x20000080 /* address of the SDRAM */
+#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
+#define SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define SDRC_MR_VAL1	0x00000004 /* refresh */
+#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	(512*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Hardware drivers
+ */
+
+/* define one of CONFIG_DBGU, CONFIG_USART0 or CONFIG_USART1 to choose console */
+#define CONFIG_DBGU
+
+#define CONFIG_BOOTDELAY      3
+
+#define CONFIG_CMDLINE_EDITING  1
+
+#define	CONFIG_EXTRA_ENV_SETTINGS											\
+	"mtdids=nor0=physmap-flash.0\0"											\
+	"mtdparts=mtdparts=physmap-flash.0:128k(uboot)ro,128k(env),1536k(kernel),-(jffs2)\0"				\
+	"bootargs_base=setenv bootargs console=ttyAT0,115200\0"								\
+	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
+	"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0"							\
+	"bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock3 rootfstype=jffs2\0"				\
+	"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x11040000\0"				\
+	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x20000000 $(uimage); bootm\0"		\
+	"autoload=n\0"													\
+	"uimage=uImage-eco920\0"											\
+	"jffs2=root-eco920.jffs2\0"
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x2000000
+
+#define CFG_MEMTEST_START		PHYS_SDRAM
+#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+
+#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_AT91C_USE_RMII
+
+#define CFG_LOAD_ADDR		0x21000000  /* default load address */
+
+#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt */
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define CFG_MAXARGS		32		/* max number of command args */
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+
+#define CLOCK_TICK_RATE		AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
+							/* AT91C_TC_TIMER_DIV1_CLOCK */
+
+#define CONFIG_STACKSIZE	(32 * 1024)	/* regular stack */
+
+#define CONFIG_MISC_INIT_R      1       /* call misc_init_r() on init   */
+#define CFG_SPLASH		1
+#define CFG_S1D13706FB		1
+
+#define CFG_USB_OHCI_MAX_ROOT_PORTS     15
+#define CFG_USB_OHCI_SLOT_NAME           "at91rm9200"
+#define LITTLEENDIAN
+#define CONFIG_AT91C_PQFP_UHPBUG
+
+#endif
+
diff --git a/board/imx27ads/config.h b/board/imx27ads/config.h
new file mode 100644
index 0000000000..362fe9d29f
--- /dev/null
+++ b/board/imx27ads/config.h
@@ -0,0 +1,31 @@
+/**
+ * @file
+ * @brief Global defintions for the ARM i.MX27 based pcm038
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+	
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* FIXME: ugly....should be simply part of the BSP file */
+
+#include <asm/mach-types.h>
+
+#define CFG_MALLOC_LEN		(4096 << 10)
+#define CONFIG_STACKSIZE	( 120 << 10)	/* stack size */
+
+#endif	/* __CONFIG_H */
diff --git a/board/ipe337/config.h b/board/ipe337/config.h
new file mode 100644
index 0000000000..7799345f21
--- /dev/null
+++ b/board/ipe337/config.h
@@ -0,0 +1,53 @@
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Board Layout
+ */
+#define CONFIG_MALLOC_LEN	(16384 << 10)
+#define CONFIG_MALLOC_BASE	(TEXT_BASE - CONFIG_MALLOC_LEN)
+#define CONFIG_STACKBASE	(CONFIG_MALLOC_BASE - 4)
+
+/*
+ * Clock settings
+ */
+
+/* CONFIG_CLKIN_HZ is any value in Hz                            */
+#if   defined(CONFIG_MACH_IPE337_V1)
+#define CONFIG_CLKIN_HZ          25000000
+#elif defined(CONFIG_MACH_IPE337_V2)
+#define CONFIG_CLKIN_HZ          40000000
+#else
+#error "Unknown IPE337 revision"
+#endif
+
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
+/*                                                  1=CLKIN/2    */
+#define CONFIG_CLKIN_HALF               0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
+/*                                               1=bypass PLL    */
+#define CONFIG_PLL_BYPASS               0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
+/* Values can range from 1-64                                    */
+#define CONFIG_VCO_MULT		       10         /* POR default */
+/* CONFIG_CCLK_DIV controls what the core clock divider is       */
+/* Values can be 1, 2, 4, or 8 ONLY                              */
+#define CONFIG_CCLK_DIV			1         /* POR default */
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
+/* Values can range from 1-15                                    */
+#define CONFIG_SCLK_DIV			5         /* POR default */
+
+/* Frequencies selected: 400MHz CCLK / 80MHz SCLK ^= 12.5ns cycle time*/
+
+#define AMGCTLVAL               0x1F
+
+/* no need for speed, currently, leave at defaults */
+#define AMBCTL0VAL              0xFFC2FFC2
+#define AMBCTL1VAL              0xFFC2FFC2
+
+#define CONFIG_MEM_MT48LC16M16A2TG_75    1
+#define CONFIG_MEM_ADD_WDTH              9           /* 8, 9, 10, 11    */
+#define CONFIG_MEM_SIZE                 64           /* 128, 64, 32, 16 */
+
+#endif	/* __CONFIG_H */
diff --git a/board/netx/config.h b/board/netx/config.h
new file mode 100644
index 0000000000..f622f67fc8
--- /dev/null
+++ b/board/netx/config.h
@@ -0,0 +1,2 @@
+#define CFG_MALLOC_LEN             (4096 << 10)
+#define CONFIG_STACKSIZE   (120<<10)      /* stack size                 */
diff --git a/board/pcm030/config.h b/board/pcm030/config.h
new file mode 100644
index 0000000000..339ea71f8b
--- /dev/null
+++ b/board/pcm030/config.h
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2006
+ * Eric Schumann, Phytec Messatechnik GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mpc5xxx.h>
+
+/* #define DEBUG */
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+High Level Configuration Options
+(easy to change)
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+#define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
+#define CFG_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+Serial console configuration
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+
+#if (TEXT_BASE == 0xFF000000)		/* Boot low */
+#define CFG_LOWBOOT		1
+#endif
+/* RAMBOOT will be defined automatically in memory section */
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+IPB Bus clocking configuration.
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+#define  CFG_IPBSPEED_133		/* define for 133MHz speed */
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66		/* define for 66MHz speed */
+#else
+#undef CFG_PCISPEED_66			/* for 33MHz speed */
+#endif
+
+/* we only use CS-Boot */
+#define CFG_BOOTCS_START	0xFF000000
+#define CFG_BOOTCS_SIZE		0x01000000
+
+#if CONFIG_MACH_PHYCORE_MPC5200B_TINY_REV == 1
+#define CFG_BOOTCS_CFG		0x0008FD00
+#else
+#define CFG_BOOTCS_CFG		0x00083800
+#endif
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+  Memory map
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+#define CFG_MBAR		0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config  */
+#define CFG_SDRAM_BASE		0x00000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_EARLY_INITDATA_SIZE 0x100
+
+#define CFG_MALLOC_LEN		(8 << 20)	/* Reserve 8 MB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+ GPIO configuration
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+#define CFG_GPS_PORT_CONFIG	0x00558c10 /* PSC6=UART, PSC3=UART ; Ether=100MBit with MD */
+
+/*------------------------------------------------------------------------------------------------------------------------------------------------------
+ Various low-level settings
+ ------------------------------------------------------------------------------------------------------------------------------------------------------*/
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_TBCLK		CFG_MPC5XXX_CLKIN
+#define OF_SOC                  "soc5200@f0000000"
+
+#endif /* __CONFIG_H */
diff --git a/board/pcm037/config.h b/board/pcm037/config.h
new file mode 100644
index 0000000000..aa79c8a575
--- /dev/null
+++ b/board/pcm037/config.h
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2007 Juergen Beisert <jbe@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+
+#define CFG_MALLOC_LEN		(4096 << 10)
+
+#define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
+
+/* #define CONFIG_SYSPLL_CLK_FREQ	26000000 */
+
+/* FIXME */
+#define CONFIG_MX31_HCLK_FREQ	26000000
+#define CONFIG_MX31_CLK32	32000
+
+#endif
+
+/* nothing to do here yet */
diff --git a/board/pcm038/config.h b/board/pcm038/config.h
new file mode 100644
index 0000000000..51f9bd9983
--- /dev/null
+++ b/board/pcm038/config.h
@@ -0,0 +1,29 @@
+/**
+ * @file
+ * @brief Global defintions for the ARM i.MX27 based pcm038
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* FIXME: ugly....should be simply part of the BSP file */
+
+#define CFG_MALLOC_LEN		(4096 << 10)
+#define CONFIG_STACKSIZE	( 120 << 10)	/* stack size */
+
+#endif	/* __CONFIG_H */
diff --git a/board/sandbox/Makefile b/board/sandbox/Makefile
new file mode 100644
index 0000000000..af62aa25dc
--- /dev/null
+++ b/board/sandbox/Makefile
@@ -0,0 +1,5 @@
+obj-y += board.o
+obj-y += clock.o
+obj-y += hostfile.o
+obj-y += console.o
+
diff --git a/board/sandbox/board.c b/board/sandbox/board.c
new file mode 100644
index 0000000000..f7cde99537
--- /dev/null
+++ b/board/sandbox/board.c
@@ -0,0 +1,45 @@
+/*
+ * board.c
+ *
+ * Copyright (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <malloc.h>
+#include <asm/arch/linux.h>
+#include <init.h>
+#include <errno.h>
+
+static struct device_d tap_device = {
+        .name     = "tap",
+        .id       = "eth0",
+
+        .type     = DEVICE_TYPE_ETHER,
+};
+
+static int devices_init(void)
+{
+	register_device(&tap_device);
+
+	return 0;
+}
+
+device_initcall(devices_init);
+
diff --git a/board/sandbox/clock.c b/board/sandbox/clock.c
new file mode 100644
index 0000000000..27ae7e234c
--- /dev/null
+++ b/board/sandbox/clock.c
@@ -0,0 +1,48 @@
+/*
+ * clock.c - wrapper between a U-Boot clocksource and linux
+ *
+ * Copyright (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <asm/arch/linux.h>
+
+static uint64_t linux_clocksource_read(void)
+{
+	return linux_get_time();
+}
+
+static struct clocksource cs = {
+	.read	= linux_clocksource_read,
+	.mask	= 0xffffffff,
+	.shift	= 10,
+};
+
+static int clocksource_init (void)
+{
+	cs.mult = clocksource_hz2mult(1000 * 1000 * 1000, cs.shift);
+
+	init_clock(&cs);
+
+	return 0;
+}
+
+core_initcall(clocksource_init);
diff --git a/board/sandbox/config.h b/board/sandbox/config.h
new file mode 100644
index 0000000000..c96d762f2d
--- /dev/null
+++ b/board/sandbox/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define __SANDBOX__
+
+#endif	/* __CONFIG_H */
diff --git a/board/sandbox/console.c b/board/sandbox/console.c
new file mode 100644
index 0000000000..0f54e19231
--- /dev/null
+++ b/board/sandbox/console.c
@@ -0,0 +1,55 @@
+/*
+ * console.c - register a console device
+ *
+ * Copyright (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <asm/arch/linux.h>
+#include <xfuncs.h>
+
+int u_boot_register_console(char *name_template, int stdinfd, int stdoutfd)
+{
+	struct device_d *dev;
+	struct linux_console_data *data;
+
+	dev = xzalloc(sizeof(struct device_d) + sizeof(struct linux_console_data));
+
+	data = (struct linux_console_data *)(dev + 1);
+
+	dev->platform_data = data;
+
+	strcpy(dev->name, "console");
+
+
+	if (stdinfd >= 0)
+		data->flags = CONSOLE_STDIN;
+	if (stdoutfd >= 0)
+		data->flags |= CONSOLE_STDOUT | CONSOLE_STDERR;
+
+	data->stdoutfd = stdoutfd;
+	data->stdinfd  = stdinfd;
+
+	get_free_deviceid(dev->id, name_template);
+	dev->type = DEVICE_TYPE_CONSOLE;
+
+	return register_device(dev);
+}
+
diff --git a/board/sandbox/hostfile.c b/board/sandbox/hostfile.c
new file mode 100644
index 0000000000..6521722209
--- /dev/null
+++ b/board/sandbox/hostfile.c
@@ -0,0 +1,95 @@
+/*
+ * hostfile.c - use files from the host to simalute U-Boot devices
+ *
+ * Copyright (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <malloc.h>
+#include <asm/arch/linux.h>
+#include <init.h>
+#include <errno.h>
+#include <asm/arch/hostfile.h>
+#include <xfuncs.h>
+
+static ssize_t hf_read(struct device_d *dev, void *buf, size_t count, ulong offset, ulong flags)
+{
+	struct hf_platform_data *hf = dev->platform_data;
+	int fd = hf->fd;
+
+	if (linux_lseek(fd, offset) != offset)
+		return -EINVAL;
+
+	return linux_read(fd, buf, count);
+}
+
+static ssize_t hf_write(struct device_d *dev, const void *buf, size_t count, ulong offset, ulong flags)
+{
+	struct hf_platform_data *hf = dev->platform_data;
+	int fd = hf->fd;
+
+	if (linux_lseek(fd, offset) != offset)
+		return -EINVAL;
+
+	return linux_write(fd, buf, count);
+}
+
+static void hf_info(struct device_d *dev)
+{
+	struct hf_platform_data *hf = dev->platform_data;
+
+	printf("file: %s\n", hf->filename);
+}
+
+static struct driver_d hf_drv = {
+	.name  = "hostfile",
+	.probe = dummy_probe,
+	.read  = hf_read,
+	.write = hf_write,
+	.info  = hf_info,
+	.type  = DEVICE_TYPE_BLOCK,
+};
+
+static int hf_init(void)
+{
+	return register_driver(&hf_drv);
+}
+
+device_initcall(hf_init);
+
+int u_boot_register_filedev(struct hf_platform_data *hf, char *name_template)
+{
+	struct device_d *dev;
+
+	dev = xzalloc(sizeof(struct device_d));
+
+	dev->platform_data = hf;
+
+	hf = dev->platform_data;
+
+	strcpy(dev->name,"hostfile");
+	get_free_deviceid(dev->id, name_template);
+	dev->size = hf->size;
+	dev->map_base = hf->map_base;
+	dev->type = DEVICE_TYPE_BLOCK;
+
+	return register_device(dev);
+}
+
diff --git a/board/scb9328/config.h b/board/scb9328/config.h
new file mode 100644
index 0000000000..38e11549d9
--- /dev/null
+++ b/board/scb9328/config.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * 2003/13/06 Initial MP10 Support copied from wepep250
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CFG_MALLOC_LEN		(4096 << 10)
+
+#define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
+
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
+#endif	/* __CONFIG_H */
+