summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/arm/altera
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2016-09-29 14:38:07 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2016-09-29 14:38:07 +0200
commitd9a15385467936649b6c2cfeb7ab377002ddce0f (patch)
tree39175107fc884a29fbba83f47d104f493833fe19 /dts/Bindings/arm/altera
parentbfe946c9593513b0ad1b440bcd997b263487b945 (diff)
downloadbarebox-d9a15385467936649b6c2cfeb7ab377002ddce0f.tar.gz
barebox-d9a15385467936649b6c2cfeb7ab377002ddce0f.tar.xz
dts: update to v4.8-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/arm/altera')
-rw-r--r--dts/Bindings/arm/altera/socfpga-eccmgr.txt38
1 files changed, 37 insertions, 1 deletions
diff --git a/dts/Bindings/arm/altera/socfpga-eccmgr.txt b/dts/Bindings/arm/altera/socfpga-eccmgr.txt
index 5a6b16070..b545856a4 100644
--- a/dts/Bindings/arm/altera/socfpga-eccmgr.txt
+++ b/dts/Bindings/arm/altera/socfpga-eccmgr.txt
@@ -61,7 +61,9 @@ Required Properties:
- #address-cells: must be 1
- #size-cells: must be 1
- interrupts : Should be single bit error interrupt, then double bit error
- interrupt. Note the rising edge type.
+ interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
- ranges : standard definition, should translate from local addresses
Subcomponents:
@@ -70,11 +72,23 @@ L2 Cache ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-l2-ecc"
- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
On-Chip RAM ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-ocram-ecc"
- reg : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-eth-mac-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
Example:
@@ -85,15 +99,37 @@ Example:
#size-cells = <1>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ranges;
l2-ecc@ffd06010 {
compatible = "altr,socfpga-a10-l2-ecc";
reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
};
ocram-ecc@ff8c3000 {
compatible = "altr,socfpga-a10-ocram-ecc";
reg = <0xff8c3000 0x90>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH> ;
+ };
+
+ emac0-rx-ecc@ff8c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
};
};