Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 88 insertions, 0 deletions

diff --git a/dts/Bindings/arm/arm-boards b/dts/Bindings/arm/arm-boards
new file mode 100644
index 0000000000..3509707f93
--- /dev/null
+++ b/dts/Bindings/arm/arm-boards
@@ -0,0 +1,88 @@
+ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
+-----------------------------------------------------------------------------
+ARM's oldest Linux-supported platform with connectors for different core
+tiles of ARMv4, ARMv5 and ARMv6 type.
+
+Required properties (in root node):
+	compatible = "arm,integrator-ap";  /* Application Platform */
+	compatible = "arm,integrator-cp";  /* Compact Platform */
+
+FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
+
+Required nodes:
+
+- core-module: the root node to the Integrator platforms must have
+  a core-module with regs and the compatible string
+  "arm,core-module-integrator"
+- external-bus-interface: the root node to the Integrator platforms
+  must have an external bus interface with regs and the
+  compatible-string "arm,external-bus-interface"
+
+  Required properties for the core module:
+  - regs: the location and size of the core module registers, one
+    range of 0x200 bytes.
+
+- syscon: the root node of the Integrator platforms must have a
+  system controller node pointong to the control registers,
+  with the compatible string
+  "arm,integrator-ap-syscon"
+  "arm,integrator-cp-syscon"
+  respectively.
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x100 bytes.
+
+  Required properties for the AP system controller:
+  - interrupts: the AP syscon node must include the logical module
+    interrupts, stated in order of module instance <module 0>,
+    <module 1>, <module 2> ... for the CP system controller this
+    is not required not of any use.
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon";
+		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logic module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
+	};
+};
+
+
+ARM Versatile Application and Platform Baseboards
+-------------------------------------------------
+ARM's development hardware platform with connectors for customizable
+core tiles.  The hardware configuration of the Versatile boards is
+highly customizable.
+
+Required properties (in root node):
+	compatible = "arm,versatile-ab";  /* Application baseboard */
+	compatible = "arm,versatile-pb";  /* Platform baseboard */
+
+Interrupt controllers:
+- VIC required properties:
+	compatible = "arm,versatile-vic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+- SIC required properties:
+	compatible = "arm,versatile-sic";
+	interrupt-controller;
+	#interrupt-cells = <1>;