dts: update to v4.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 58 insertions, 3 deletions

diff --git a/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
index 8240c023e2..e3f9969204 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
@@ -5,7 +5,7 @@ CPUs in the following Broadcom SoCs:
   BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
 
 The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the "cpu" device tree node:
   - enable-method = "brcm,bcm11351-cpu-method";
   - secondary-boot-reg = <...>;
 
@@ -19,8 +19,6 @@ Example:
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -32,5 +30,7 @@ Example:
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
 		};
 	};
diff --git a/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
new file mode 100644
index 0000000000..a3af54c0e4
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM23550
+
+The enable method is specified by defining the following required
+properties in the "cpu" device tree node:
+  - enable-method = "brcm,bcm23550";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x3500417c>;
+		};
+	};
diff --git a/dts/Bindings/arm/bcm/brcm,bcm23550.txt b/dts/Bindings/arm/bcm/brcm,bcm23550.txt
new file mode 100644
index 0000000000..080baad923
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,bcm23550.txt
@@ -0,0 +1,15 @@
+Broadcom BCM23550 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM23550
+SoC.
+
+Required root node property:
+  - compatible: brcm,bcm23550
+
+Example:
+	/ {
+		model = "BCM23550 SoC";
+		compatible = "brcm,bcm23550";
+		[...]
+	}
diff --git a/dts/Bindings/arm/bcm/brcm,bcm2835.txt b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
index 11d3056dc2..6ffe087784 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm2835.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
 Required root node properties:
 compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
 
+Raspberry Pi 3 Model B
+Required root node properties:
+compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+
 Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";