Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

10 files changed, 347 insertions, 0 deletions

diff --git a/dts/Bindings/arm/omap/counter.txt b/dts/Bindings/arm/omap/counter.txt
new file mode 100644
index 0000000000..5bd8aa0913
--- /dev/null
+++ b/dts/Bindings/arm/omap/counter.txt
@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};
diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt
new file mode 100644
index 0000000000..fb88585cfb
--- /dev/null
+++ b/dts/Bindings/arm/omap/crossbar.txt
@@ -0,0 +1,27 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+		 crossbar. These interrupt lines are reserved in the soc,
+		 so crossbar bar driver should not consider them as free
+		 lines.
+
+Examples:
+		crossbar_mpu: @4a020000 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+		};
diff --git a/dts/Bindings/arm/omap/dmm.txt b/dts/Bindings/arm/omap/dmm.txt
new file mode 100644
index 0000000000..8bd6d0a238
--- /dev/null
+++ b/dts/Bindings/arm/omap/dmm.txt
@@ -0,0 +1,22 @@
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible:	Should contain "ti,omap4-dmm" for OMAP4 family
+		Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg:		Contains DMM register address range (base address and length)
+- interrupts:	Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods:	Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+	compatible = "ti,omap4-dmm";
+	reg = <0x4e000000 0x800>;
+	ti,hwmods = "dmm";
+};
diff --git a/dts/Bindings/arm/omap/dsp.txt b/dts/Bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000000..d3830a32ce
--- /dev/null
+++ b/dts/Bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};
diff --git a/dts/Bindings/arm/omap/intc.txt b/dts/Bindings/arm/omap/intc.txt
new file mode 100644
index 0000000000..f2583e6ec0
--- /dev/null
+++ b/dts/Bindings/arm/omap/intc.txt
@@ -0,0 +1,27 @@
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+	"ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+
+  The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+	intc: interrupt-controller@1 {
+		compatible = "ti,omap2-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		ti,intc-size = <96>;
+		reg = <0x48200000 0x1000>;
+	};
+
diff --git a/dts/Bindings/arm/omap/iva.txt b/dts/Bindings/arm/omap/iva.txt
new file mode 100644
index 0000000000..6d62951713
--- /dev/null
+++ b/dts/Bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};
diff --git a/dts/Bindings/arm/omap/l3-noc.txt b/dts/Bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000000..c0105de55c
--- /dev/null
+++ b/dts/Bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,20 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+               Should be "ti,omap4-l3-noc" for OMAP4 family
+- reg:	Contains L3 register address range for each noc domain.
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+	compatible = "ti,omap4-l3-noc", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/dts/Bindings/arm/omap/mpu.txt b/dts/Bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000000..83f405bde1
--- /dev/null
+++ b/dts/Bindings/arm/omap/mpu.txt
@@ -0,0 +1,35 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};
diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt
new file mode 100644
index 0000000000..36ede19a16
--- /dev/null
+++ b/dts/Bindings/arm/omap/omap.txt
@@ -0,0 +1,124 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+address range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+SoC Type (optional):
+
+- General Purpose devices
+  compatible = "ti,gp"
+- High Security devices
+  compatible = "ti,hs"
+
+SoC Families:
+
+- OMAP2 generic - defaults to OMAP2420
+  compatible = "ti,omap2"
+- OMAP3 generic - defaults to OMAP3430
+  compatible = "ti,omap3"
+- OMAP4 generic - defaults to OMAP4430
+  compatible = "ti,omap4"
+- OMAP5 generic - defaults to OMAP5430
+  compatible = "ti,omap5"
+- DRA7 generic - defaults to DRA742
+  compatible = "ti,dra7"
+- AM43x generic - defaults to AM4372
+  compatible = "ti,am43"
+
+SoCs:
+
+- OMAP2420
+  compatible = "ti,omap2420", "ti,omap2"
+- OMAP2430
+  compatible = "ti,omap2430", "ti,omap2"
+
+- OMAP3430
+  compatible = "ti,omap3430", "ti,omap3"
+- AM3517
+  compatible = "ti,am3517", "ti,omap3"
+- OMAP3630
+  compatible = "ti,omap36xx", "ti,omap3"
+- AM33xx
+  compatible = "ti,am33xx", "ti,omap3"
+
+- OMAP4430
+  compatible = "ti,omap4430", "ti,omap4"
+- OMAP4460
+  compatible = "ti,omap4460", "ti,omap4"
+
+- OMAP5430
+  compatible = "ti,omap5430", "ti,omap5"
+- OMAP5432
+  compatible = "ti,omap5432", "ti,omap5"
+
+- DRA742
+  compatible = "ti,dra7xx", "ti,dra7"
+
+- AM4372
+  compatible = "ti,am4372", "ti,am43"
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+  compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
+
+- OMAP4 SDP : Software Development Board
+  compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+  compatible = "ti,omap4-panda", "ti,omap4430"
+
+- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
+  compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
+  compatible = "ti,omap3-evm", "ti,omap3"
+
+- AM335X EVM : Software Development Board for AM335x
+  compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- AM335X Bone : Low cost community board
+  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+
+- OMAP5 EVM : Evaluation Module
+  compatible = "ti,omap5-evm", "ti,omap5"
+
+- AM43x EPOS EVM
+  compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+
+- AM437x GP EVM
+  compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+
+- DRA7 EVM:  Software Developement Board for DRA7XX
+  compatible = "ti,dra7-evm", "ti,dra7"
diff --git a/dts/Bindings/arm/omap/timer.txt b/dts/Bindings/arm/omap/timer.txt
new file mode 100644
index 0000000000..d02e27c764
--- /dev/null
+++ b/dts/Bindings/arm/omap/timer.txt
@@ -0,0 +1,44 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Should be set to one of the below. Please note that
+			OMAP44xx devices have timer instances that are 100%
+			register compatible with OMAP3xxx devices as well as
+			newer timers that are not 100% register compatible.
+			So for OMAP44xx devices timer instances may use
+			different compatible strings.
+
+			ti,omap2420-timer (applicable to OMAP24xx devices)
+			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
+			ti,omap4430-timer (applicable to OMAP44xx devices)
+			ti,omap5430-timer (applicable to OMAP543x devices)
+			ti,am335x-timer	(applicable to AM335x devices)
+			ti,am335x-timer-1ms (applicable to AM335x devices)
+
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap3430-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};