dts: update to v4.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 112 insertions, 17 deletions

diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt
index 4139db353d..a9b28d74d9 100644
--- a/dts/Bindings/arm/omap/crossbar.txt
+++ b/dts/Bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
 Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
   when the interrupt controller irq is unused (when not provided, default is 0)
 
 Examples:
-		crossbar_mpu: @4a020000 {
+		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
 			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
 			ti,irqs-skip = <10 133 139 140>;
 		};
 
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
 
 An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
 
 Example:
 	device_x@0x4a023000 {
@@ -55,9 +53,3 @@ Example:
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...
 	};
-
-	device_y@0x4a033000 {
-		/* Direct mapped GIC SPI 1 used */
-		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/dts/Bindings/arm/omap/ctrl.txt b/dts/Bindings/arm/omap/ctrl.txt
new file mode 100644
index 0000000000..3a4e5901ce
--- /dev/null
+++ b/dts/Bindings/arm/omap/ctrl.txt
@@ -0,0 +1,79 @@
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-scm"
+		"ti,am4-scm"
+		"ti,dm814-scrm"
+		"ti,dm816-scrm"
+		"ti,omap2-scm"
+		"ti,omap3-scm"
+		"ti,omap4-scm-core"
+		"ti,omap4-scm-padconf-core"
+		"ti,omap5-scm-core"
+		"ti,omap5-scm-padconf-core"
+		"ti,dra7-scm-core"
+- reg:		Contains Control Module register address range
+		(base address and length)
+
+Optional properties:
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Examples:
+
+scm: scm@2000 {
+	compatible = "ti,omap3-scm", "simple-bus";
+	reg = <0x2000 0x2000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x2000 0x2000>;
+
+	omap3_pmx_core: pinmux@30 {
+		compatible = "ti,omap3-padconf",
+			     "pinctrl-single";
+		reg = <0x30 0x230>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		pinctrl-single,register-width = <16>;
+		pinctrl-single,function-mask = <0xff1f>;
+	};
+
+	scm_conf: scm_conf@270 {
+		compatible = "syscon";
+		reg = <0x270 0x330>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scm_clocks: clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	scm_clockdomains: clockdomains {
+	};
+}
+
+&scm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+};
diff --git a/dts/Bindings/arm/omap/l4.txt b/dts/Bindings/arm/omap/l4.txt
new file mode 100644
index 0000000000..b4f8a16e7e
--- /dev/null
+++ b/dts/Bindings/arm/omap/l4.txt
@@ -0,0 +1,26 @@
+L4 interconnect bindings
+
+These bindings describe the OMAP SoCs L4 interconnect bus.
+
+Required properties:
+- compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
+	       Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+	       Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
+	       Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+	       Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
+	       Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
+	       Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
+	       Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
+	       Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
+	       Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
+	       Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
+- ranges : contains the IO map range for the bus
+
+Examples:
+
+l4: l4@48000000 {
+	compatible "ti,omap2-l4", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x48000000 0x100000>;
+};
diff --git a/dts/Bindings/arm/omap/prcm.txt b/dts/Bindings/arm/omap/prcm.txt
index 79074dac68..3eb6d7afff 100644
--- a/dts/Bindings/arm/omap/prcm.txt
+++ b/dts/Bindings/arm/omap/prcm.txt
@@ -10,14 +10,10 @@ documentation about the individual clock/clockdomain nodes.
 Required properties:
 - compatible:	Must be one of:
 		"ti,am3-prcm"
-		"ti,am3-scrm"
 		"ti,am4-prcm"
-		"ti,am4-scrm"
 		"ti,omap2-prcm"
-		"ti,omap2-scrm"
 		"ti,omap3-prm"
 		"ti,omap3-cm"
-		"ti,omap3-scrm"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
@@ -29,6 +25,8 @@ Required properties:
 		"ti,dra7-prm"
 		"ti,dra7-cm-core-aon"
 		"ti,dra7-cm-core"
+		"ti,dm814-prcm"
+		"ti,dm816-prcm"
 - reg:		Contains PRCM module register address range
 		(base address and length)
 - clocks:	clocks for this module