dts: update to v3.17-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 104 insertions, 0 deletions

diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt
index fb88585cfb..4139db353d 100644
--- a/dts/Bindings/arm/omap/crossbar.txt
+++ b/dts/Bindings/arm/omap/crossbar.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
 - ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
 - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@ Required properties:
 		 so crossbar bar driver should not consider them as free
 		 lines.
 
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
 Examples:
 		crossbar_mpu: @4a020000 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
 			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-skip = <10 133 139 140>;
 		};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+	interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+	device_x@0x4a023000 {
+		/* Crossbar 8 used */
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
+
+	device_y@0x4a033000 {
+		/* Direct mapped GIC SPI 1 used */
+		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt
index d22b216f5d..0edc90305d 100644
--- a/dts/Bindings/arm/omap/omap.txt
+++ b/dts/Bindings/arm/omap/omap.txt
@@ -129,6 +129,9 @@ Boards:
 - AM437x GP EVM
   compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
 
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 
diff --git a/dts/Bindings/arm/omap/prcm.txt b/dts/Bindings/arm/omap/prcm.txt
new file mode 100644
index 0000000000..79074dac68
--- /dev/null
+++ b/dts/Bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prcm"
+		"ti,am3-scrm"
+		"ti,am4-prcm"
+		"ti,am4-scrm"
+		"ti,omap2-prcm"
+		"ti,omap2-scrm"
+		"ti,omap3-prm"
+		"ti,omap3-cm"
+		"ti,omap3-scrm"
+		"ti,omap4-cm1"
+		"ti,omap4-prm"
+		"ti,omap4-cm2"
+		"ti,omap4-scrm"
+		"ti,omap5-prm"
+		"ti,omap5-cm-core-aon"
+		"ti,omap5-scrm"
+		"ti,omap5-cm-core"
+		"ti,dra7-prm"
+		"ti,dra7-cm-core-aon"
+		"ti,dra7-cm-core"
+- reg:		Contains PRCM module register address range
+		(base address and length)
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+	compatible = "ti,omap3-cm";
+	reg = <0x48004000 0x4000>;
+
+	cm_clocks: clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	cm_clockdomains: clockdomains {
+	};
+}
+
+&cm_clocks {
+	omap2_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+};