dts: update to v4.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 37 insertions, 2 deletions

diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
index 067c979006..9a4295b545 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ b/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -5,9 +5,12 @@ Required properties:
   Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
   '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
   tegra132, or tegra210.
-- reg : Should contain 1 register ranges(address and length)
+- reg : Should contain 1 register ranges(address and length).  For
+  Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004
+  0x10c>.  For Tegra124, Tegra132 and Tegra210 chips, the value should
+  be be <0x6000c000 0x150>.
 
-Example:
+Example (for a Tegra20 chip):
 	ahb: ahb@6000c004 {
 		compatible = "nvidia,tegra20-ahb";
 		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt b/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt
new file mode 100644
index 0000000000..ea670a5d7e
--- /dev/null
+++ b/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt
@@ -0,0 +1,32 @@
+NVIDIA Tegra Activity Monitor
+
+The activity monitor block collects statistics about the behaviour of other
+components in the system. This information can be used to derive the rate at
+which the external memory needs to be clocked in order to serve all requests
+from the monitored clients.
+
+Required properties:
+- compatible: should be "nvidia,tegra<chip>-actmon"
+- reg: offset and length of the register set for the device
+- interrupts: standard interrupt property
+- clocks: Must contain a phandle and clock specifier pair for each entry in
+clock-names. See ../../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - actmon
+  - emc
+- resets: Must contain an entry for each entry in reset-names. See
+../../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - actmon
+
+Example:
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};