Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 25 insertions, 0 deletions

diff --git a/dts/Bindings/arm/xen.txt b/dts/Bindings/arm/xen.txt
new file mode 100644
index 0000000000..0f7b9c2109
--- /dev/null
+++ b/dts/Bindings/arm/xen.txt
@@ -0,0 +1,25 @@
+* Xen hypervisor device tree bindings
+
+Xen ARM virtual platforms shall have a top-level "hypervisor" node with
+the following properties:
+
+- compatible:
+	compatible = "xen,xen-<version>", "xen,xen";
+  where <version> is the version of the Xen ABI of the platform.
+
+- reg: specifies the base physical address and size of a region in
+  memory where the grant table should be mapped to, using an
+  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
+  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
+
+- interrupts: the interrupt used by Xen to inject event notifications.
+  A GIC node is also required.
+
+
+Example (assuming #address-cells = <2> and #size-cells = <2>):
+
+hypervisor {
+	compatible = "xen,xen-4.3", "xen,xen";
+	reg = <0 0xb0000000 0 0x20000>;
+	interrupts = <1 15 0xf08>;
+};