summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/arm
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2016-09-29 14:38:07 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2016-09-29 14:38:07 +0200
commitd9a15385467936649b6c2cfeb7ab377002ddce0f (patch)
tree39175107fc884a29fbba83f47d104f493833fe19 /dts/Bindings/arm
parentbfe946c9593513b0ad1b440bcd997b263487b945 (diff)
downloadbarebox-d9a15385467936649b6c2cfeb7ab377002ddce0f.tar.gz
dts: update to v4.8-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/arm')
-rw-r--r--dts/Bindings/arm/altera/socfpga-eccmgr.txt38
-rw-r--r--dts/Bindings/arm/arm,scpi.txt34
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt6
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt36
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm23550.txt15
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm2835.txt4
-rw-r--r--dts/Bindings/arm/coresight.txt35
-rw-r--r--dts/Bindings/arm/cpus.txt3
-rw-r--r--dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt14
-rw-r--r--dts/Bindings/arm/l2c2x0.txt4
-rw-r--r--dts/Bindings/arm/mediatek.txt4
-rw-r--r--dts/Bindings/arm/olimex.txt8
-rw-r--r--dts/Bindings/arm/pmu.txt4
-rw-r--r--dts/Bindings/arm/rockchip.txt3
-rw-r--r--dts/Bindings/arm/samsung/samsung-boards.txt1
-rw-r--r--dts/Bindings/arm/shmobile.txt6
-rw-r--r--dts/Bindings/arm/tegra.txt4
-rw-r--r--dts/Bindings/arm/xen.txt35
18 files changed, 237 insertions, 17 deletions
diff --git a/dts/Bindings/arm/altera/socfpga-eccmgr.txt b/dts/Bindings/arm/altera/socfpga-eccmgr.txt
index 5a6b160..b545856 100644
--- a/dts/Bindings/arm/altera/socfpga-eccmgr.txt
+++ b/dts/Bindings/arm/altera/socfpga-eccmgr.txt
@@ -61,7 +61,9 @@ Required Properties:
- #address-cells: must be 1
- #size-cells: must be 1
- interrupts : Should be single bit error interrupt, then double bit error
- interrupt. Note the rising edge type.
+ interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
- ranges : standard definition, should translate from local addresses
Subcomponents:
@@ -70,11 +72,23 @@ L2 Cache ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-l2-ecc"
- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
On-Chip RAM ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-ocram-ecc"
- reg : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-eth-mac-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
Example:
@@ -85,15 +99,37 @@ Example:
#size-cells = <1>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ranges;
l2-ecc@ffd06010 {
compatible = "altr,socfpga-a10-l2-ecc";
reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
};
ocram-ecc@ff8c3000 {
compatible = "altr,socfpga-a10-ocram-ecc";
reg = <0xff8c3000 0x90>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH> ;
+ };
+
+ emac0-rx-ecc@ff8c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/dts/Bindings/arm/arm,scpi.txt b/dts/Bindings/arm/arm,scpi.txt
index 313dabd..faa4b44 100644
--- a/dts/Bindings/arm/arm,scpi.txt
+++ b/dts/Bindings/arm/arm,scpi.txt
@@ -87,10 +87,33 @@ Required properties:
implementation for the IDs to use. For Juno
R0 and Juno R1 refer to [3].
+Power domain bindings for the power domains based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the generic power domain binding[4].
+
+PM domain providers
+===================
+
+Required properties:
+ - #power-domain-cells : Should be 1. Contains the device or the power
+ domain ID value used by SCPI commands.
+ - num-domains: Total number of power domains provided by SCPI. This is
+ needed as the SCPI message protocol lacks a mechanism to
+ query this information at runtime.
+
+PM domain consumers
+===================
+
+Required properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle.
+
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+[4] Documentation/devicetree/bindings/power/power_domain.txt
Example:
@@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
+
+ scpi_devpd: scpi-power-domains {
+ compatible = "arm,scpi-power-domains";
+ num-domains = <2>;
+ #power-domain-cells = <1>;
+ };
};
cpu@0 {
@@ -156,6 +185,7 @@ hdlcd@7ff60000 {
...
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scpi_clk 4>;
+ power-domains = <&scpi_devpd 1>;
};
thermal-zones {
@@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the
temperature sensor provided by SCP firmware to setup a thermal
zone. The ID "3" is the sensor identifier for the temperature sensor
as used by the firmware.
+
+The num-domains property in scpi-power-domains domain specifies that
+SCPI provides 2 power domains. The hdlcd node uses the power domain with
+domain ID 1.
diff --git a/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
index 8240c02..e3f9969 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
@@ -5,7 +5,7 @@ CPUs in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the "cpu" device tree node:
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <...>;
@@ -19,8 +19,6 @@ Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -32,5 +30,7 @@ Example:
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
};
};
diff --git a/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
new file mode 100644
index 0000000..a3af54c
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+ BCM23550
+
+The enable method is specified by defining the following required
+properties in the "cpu" device tree node:
+ - enable-method = "brcm,bcm23550";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU. The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ enable-method = "brcm,bcm23550";
+ secondary-boot-reg = <0x3500417c>;
+ };
+ };
diff --git a/dts/Bindings/arm/bcm/brcm,bcm23550.txt b/dts/Bindings/arm/bcm/brcm,bcm23550.txt
new file mode 100644
index 0000000..080baad
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,bcm23550.txt
@@ -0,0 +1,15 @@
+Broadcom BCM23550 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM23550
+SoC.
+
+Required root node property:
+ - compatible: brcm,bcm23550
+
+Example:
+ / {
+ model = "BCM23550 SoC";
+ compatible = "brcm,bcm23550";
+ [...]
+ }
diff --git a/dts/Bindings/arm/bcm/brcm,bcm2835.txt b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
index 11d3056..6ffe087 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm2835.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
Required root node properties:
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+Raspberry Pi 3 Model B
+Required root node properties:
+compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
diff --git a/dts/Bindings/arm/coresight.txt b/dts/Bindings/arm/coresight.txt
index 93147c0..fcbae6a 100644
--- a/dts/Bindings/arm/coresight.txt
+++ b/dts/Bindings/arm/coresight.txt
@@ -12,14 +12,33 @@ its hardware characteristcs.
* compatible: These have to be supplemented with "arm,primecell" as
drivers are using the AMBA bus interface. Possible values include:
- - "arm,coresight-etb10", "arm,primecell";
- - "arm,coresight-tpiu", "arm,primecell";
- - "arm,coresight-tmc", "arm,primecell";
- - "arm,coresight-funnel", "arm,primecell";
- - "arm,coresight-etm3x", "arm,primecell";
- - "arm,coresight-etm4x", "arm,primecell";
- - "qcom,coresight-replicator1x", "arm,primecell";
- - "arm,coresight-stm", "arm,primecell"; [1]
+ - Embedded Trace Buffer (version 1.0):
+ "arm,coresight-etb10", "arm,primecell";
+
+ - Trace Port Interface Unit:
+ "arm,coresight-tpiu", "arm,primecell";
+
+ - Trace Memory Controller, used for Embedded Trace Buffer(ETB),
+ Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
+ configuration. The configuration mode (ETB, ETF, ETR) is
+ discovered at boot time when the device is probed.
+ "arm,coresight-tmc", "arm,primecell";
+
+ - Trace Funnel:
+ "arm,coresight-funnel", "arm,primecell";
+
+ - Embedded Trace Macrocell (version 3.x) and
+ Program Flow Trace Macrocell:
+ "arm,coresight-etm3x", "arm,primecell";
+
+ - Embedded Trace Macrocell (version 4.x):
+ "arm,coresight-etm4x", "arm,primecell";
+
+ - Qualcomm Configurable Replicator (version 1.x):
+ "qcom,coresight-replicator1x", "arm,primecell";
+
+ - System Trace Macrocell:
+ "arm,coresight-stm", "arm,primecell"; [1]
* reg: physical base address and length of the register
set(s) of the component.
diff --git a/dts/Bindings/arm/cpus.txt b/dts/Bindings/arm/cpus.txt
index 3f0cbbb..e6782d5 100644
--- a/dts/Bindings/arm/cpus.txt
+++ b/dts/Bindings/arm/cpus.txt
@@ -193,6 +193,8 @@ nodes to be present and contain the properties described below.
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,realview-smp"
+ "brcm,bcm11351-cpu-method"
+ "brcm,bcm23550"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
@@ -204,6 +206,7 @@ nodes to be present and contain the properties described below.
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
+ "renesas,apmu"
"rockchip,rk3036-smp"
"rockchip,rk3066-smp"
"ste,dbx500-smp"
diff --git a/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
new file mode 100644
index 0000000..115c5be
--- /dev/null
+++ b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
@@ -0,0 +1,14 @@
+* Hisilicon Hi3519 System Controller Block
+
+This bindings use the following binding:
+Documentation/devicetree/bindings/mfd/syscon.txt
+
+Required properties:
+- compatible: "hisilicon,hi3519-sysctrl".
+- reg: the register region of this block
+
+Examples:
+sysctrl: system-controller@12010000 {
+ compatible = "hisilicon,hi3519-sysctrl", "syscon";
+ reg = <0x12010000 0x1000>;
+};
diff --git a/dts/Bindings/arm/l2c2x0.txt b/dts/Bindings/arm/l2c2x0.txt
index c453ab5..917199f 100644
--- a/dts/Bindings/arm/l2c2x0.txt
+++ b/dts/Bindings/arm/l2c2x0.txt
@@ -86,10 +86,10 @@ Optional properties:
firmware)
- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
disable), <1> (forcibly enable), property absent (OS specific behavior,
- preferrably retain firmware settings)
+ preferably retain firmware settings)
- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
<1> (forcibly enable), property absent (OS specific behavior,
- preferrably retain firmware settings)
+ preferably retain firmware settings)
Example:
diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt
index d9c2a37..c860b24 100644
--- a/dts/Bindings/arm/mediatek.txt
+++ b/dts/Bindings/arm/mediatek.txt
@@ -10,6 +10,7 @@ compatible: Must contain one of
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
+ "mediatek,mt6755"
"mediatek,mt6795"
"mediatek,mt7623"
"mediatek,mt8127"
@@ -31,6 +32,9 @@ Supported boards:
- Evaluation board for MT6592:
Required root node properties:
- compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- Evaluation phone for MT6755(Helio P10):
+ Required root node properties:
+ - compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
- Evaluation board for MT6795(Helio X10):
Required root node properties:
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
diff --git a/dts/Bindings/arm/olimex.txt b/dts/Bindings/arm/olimex.txt
index 007fb5c..d726aec 100644
--- a/dts/Bindings/arm/olimex.txt
+++ b/dts/Bindings/arm/olimex.txt
@@ -1,5 +1,9 @@
-Olimex i.MX Platforms Device Tree Bindings
-------------------------------------------
+Olimex Device Tree Bindings
+---------------------------
+
+SAM9-L9260 Board
+Required root node properties:
+ - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
i.MX23 Olinuxino Low Cost Board
Required root node properties:
diff --git a/dts/Bindings/arm/pmu.txt b/dts/Bindings/arm/pmu.txt
index 74d5417..61c8b46 100644
--- a/dts/Bindings/arm/pmu.txt
+++ b/dts/Bindings/arm/pmu.txt
@@ -39,7 +39,9 @@ Optional properties:
When using a PPI, specifies a list of phandles to CPU
nodes corresponding to the set of CPUs which have
a PMU of this type signalling the PPI listed in the
- interrupts property.
+ interrupts property, unless this is already specified
+ by the PPI interrupt specifier itself (in which case
+ the interrupt-affinity property shouldn't be present).
This property should be present when there is more than
a single SPI.
diff --git a/dts/Bindings/arm/rockchip.txt b/dts/Bindings/arm/rockchip.txt
index 715d960..6668645 100644
--- a/dts/Bindings/arm/rockchip.txt
+++ b/dts/Bindings/arm/rockchip.txt
@@ -107,6 +107,9 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+- Rockchip RK3229 Evaluation board:
+ - compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
diff --git a/dts/Bindings/arm/samsung/samsung-boards.txt b/dts/Bindings/arm/samsung/samsung-boards.txt
index f5deace..0ea7f14 100644
--- a/dts/Bindings/arm/samsung/samsung-boards.txt
+++ b/dts/Bindings/arm/samsung/samsung-boards.txt
@@ -47,6 +47,7 @@ Required root node properties:
- "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3.
- "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X.
- "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2.
+ - "hardkernel,odroid-xu" - for Exynos5410-based Hardkernel Odroid XU.
- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
Odroid XU3 Lite board.
diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt
index 9cf67e4..1df32d3 100644
--- a/dts/Bindings/arm/shmobile.txt
+++ b/dts/Bindings/arm/shmobile.txt
@@ -29,6 +29,8 @@ SoCs:
compatible = "renesas,r8a7794"
- R-Car H3 (R8A77950)
compatible = "renesas,r8a7795"
+ - R-Car M3-W (R8A77960)
+ compatible = "renesas,r8a7796"
Boards:
@@ -39,6 +41,8 @@ Boards:
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva"
+ - Blanche (RTP0RC7792SEB00010S)
+ compatible = "renesas,blanche", "renesas,r8a7792"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
@@ -61,5 +65,7 @@ Boards:
compatible = "renesas,porter", "renesas,r8a7791"
- Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795";
+ - Salvator-X
+ compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
diff --git a/dts/Bindings/arm/tegra.txt b/dts/Bindings/arm/tegra.txt
index 73278c6..b5a4342 100644
--- a/dts/Bindings/arm/tegra.txt
+++ b/dts/Bindings/arm/tegra.txt
@@ -32,7 +32,11 @@ board-specific compatible values:
nvidia,whistler
toradex,apalis_t30
toradex,apalis_t30-eval
+ toradex,apalis-tk1
+ toradex,apalis-tk1-eval
toradex,colibri_t20-512
+ toradex,colibri_t30
+ toradex,colibri_t30-eval-v3
toradex,iris
Trusted Foundations
diff --git a/dts/Bindings/arm/xen.txt b/dts/Bindings/arm/xen.txt
index 0f7b9c2..c9b9321 100644
--- a/dts/Bindings/arm/xen.txt
+++ b/dts/Bindings/arm/xen.txt
@@ -11,10 +11,32 @@ the following properties:
memory where the grant table should be mapped to, using an
HYPERVISOR_memory_op hypercall. The memory region is large enough to map
the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
+ This property is unnecessary when booting Dom0 using ACPI.
- interrupts: the interrupt used by Xen to inject event notifications.
A GIC node is also required.
+ This property is unnecessary when booting Dom0 using ACPI.
+To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
+under /hypervisor with following parameters:
+
+________________________________________________________________________________
+Name | Size | Description
+================================================================================
+xen,uefi-system-table | 64-bit | Guest physical address of the UEFI System
+ | | Table.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-start | 64-bit | Guest physical address of the UEFI memory
+ | | map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-size | 32-bit | Size in bytes of the UEFI memory map
+ | | pointed to in previous entry.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI
+ | | memory map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format.
+--------------------------------------------------------------------------------
Example (assuming #address-cells = <2> and #size-cells = <2>):
@@ -22,4 +44,17 @@ hypervisor {
compatible = "xen,xen-4.3", "xen,xen";
reg = <0 0xb0000000 0 0x20000>;
interrupts = <1 15 0xf08>;
+ uefi {
+ xen,uefi-system-table = <0xXXXXXXXX>;
+ xen,uefi-mmap-start = <0xXXXXXXXX>;
+ xen,uefi-mmap-size = <0xXXXXXXXX>;
+ xen,uefi-mmap-desc-size = <0xXXXXXXXX>;
+ xen,uefi-mmap-desc-ver = <0xXXXXXXXX>;
+ };
};
+
+The format and meaning of the "xen,uefi-*" parameters are similar to those in
+Documentation/arm/uefi.txt, which are provided by the regular UEFI stub. However
+they differ because they are provided by the Xen hypervisor, together with a set
+of UEFI runtime services implemented via hypercalls, see
+http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.