dts: update to v4.3-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

12 files changed, 442 insertions, 14 deletions

diff --git a/dts/Bindings/clock/gpio-mux-clock.txt b/dts/Bindings/clock/gpio-mux-clock.txt
new file mode 100644
index 0000000000..2be1e038ca
--- /dev/null
+++ b/dts/Bindings/clock/gpio-mux-clock.txt
@@ -0,0 +1,19 @@
+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+	clock {
+		compatible = "gpio-mux-clock";
+		clocks = <&parentclk1>, <&parentclk2>;
+		#clock-cells = <0>;
+		select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+	};
diff --git a/dts/Bindings/clock/hi6220-clock.txt b/dts/Bindings/clock/hi6220-clock.txt
index 259e30af95..e4d5feaebc 100644
--- a/dts/Bindings/clock/hi6220-clock.txt
+++ b/dts/Bindings/clock/hi6220-clock.txt
@@ -15,19 +15,36 @@ Required Properties:
 	- "hisilicon,hi6220-sysctrl"
 	- "hisilicon,hi6220-mediactrl"
 	- "hisilicon,hi6220-pmctrl"
+	- "hisilicon,hi6220-stub-clk"
 
 - reg: physical base address of the controller and length of memory mapped
   region.
 
 - #clock-cells: should be 1.
 
-For example:
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+  the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+  second parameter is the channel number.
+
+Example 1:
 	sys_ctrl: sys_ctrl@f7030000 {
 		compatible = "hisilicon,hi6220-sysctrl", "syscon";
 		reg = <0x0 0xf7030000 0x0 0x2000>;
 		#clock-cells = <1>;
 	};
 
+Example 2:
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mboxes = <&mailbox 1>;
+	};
+
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.
 
diff --git a/dts/Bindings/clock/imx6ul-clock.txt b/dts/Bindings/clock/imx6ul-clock.txt
new file mode 100644
index 0000000000..571d5039f6
--- /dev/null
+++ b/dts/Bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/dts/Bindings/clock/mt8173-cpu-dvfs.txt b/dts/Bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 0000000000..52b457c23e
--- /dev/null
+++ b/dts/Bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
diff --git a/dts/Bindings/clock/nvidia,tegra124-dfll.txt b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 0000000000..ee7e5fd4a5
--- /dev/null
+++ b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,79 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+Currently only the I2C mode is supported by these bindings.
+
+Required properties:
+- compatible : should be "nvidia,tegra124-dfll"
+- reg : Defines the following set of registers, in the order listed:
+        - registers for the DFLL control logic.
+        - registers for the I2C output logic.
+        - registers for the integrated I2C master controller.
+        - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - soc: Clock source for the DFLL control logic.
+  - ref: The closed loop reference clock
+  - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+  hardware will start controlling. The regulator will be queried for
+  the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Example:
+
+clock@0,70110000 {
+        compatible = "nvidia,tegra124-dfll";
+        reg = <0 0x70110000 0 0x100>, /* DFLL control */
+              <0 0x70110000 0 0x100>, /* I2C output control */
+              <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+              <0 0x70110200 0 0x100>; /* Look-up table RAM */
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+                 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+                 <&tegra_car TEGRA124_CLK_I2C5>;
+        clock-names = "soc", "ref", "i2c";
+        resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+        reset-names = "dvco";
+        #clock-cells = <0>;
+        clock-output-names = "dfllCPU_out";
+        vdd-cpu-supply = <&vdd_cpu>;
+        status = "okay";
+
+        nvidia,sample-rate = <12500>;
+        nvidia,droop-ctrl = <0x00000f00>;
+        nvidia,force-mode = <1>;
+        nvidia,cf = <10>;
+        nvidia,ci = <0>;
+        nvidia,cg = <2>;
+
+        nvidia,i2c-fs-rate = <400000>;
+};
diff --git a/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt b/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
index 2f3747fdcf..e4cdaf1cb3 100644
--- a/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -1,7 +1,9 @@
 * Renesas R8A7778 Clock Pulse Generator (CPG)
 
 The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
 
 Required Properties:
 
@@ -10,10 +12,18 @@ Required Properties:
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are
     "plla", "pllb", "b", "out", "p", "s", and "s1".
+  - #power-domain-cells: Must be 0
 
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
 
-Example
--------
+
+Examples
+--------
+
+  - CPG device node:
 
 	cpg_clocks: cpg_clocks@ffc80000 {
 		compatible = "renesas,r8a7778-cpg-clocks";
@@ -22,4 +32,17 @@ Example
 		clocks = <&extal_clk>;
 		clock-output-names = "plla", "pllb", "b",
 				     "out", "p", "s", "s1";
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSTP Clock Domain member device node:
+
+	sdhi0: sd@ffe4c000 {
+		compatible = "renesas,sdhi-r8a7778";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/renesas,r8a7779-cpg-clocks.txt b/dts/Bindings/clock/renesas,r8a7779-cpg-clocks.txt
index ed3c8cb12f..8c81547c29 100644
--- a/dts/Bindings/clock/renesas,r8a7779-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -1,7 +1,9 @@
 * Renesas R8A7779 Clock Pulse Generator (CPG)
 
 The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
 
 Required Properties:
 
@@ -12,16 +14,36 @@ Required Properties:
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are "plla",
     "z", "zs", "s", "s1", "p", "b", "out".
+  - #power-domain-cells: Must be 0
 
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
 
-Example
--------
+
+Examples
+--------
+
+  - CPG device node:
 
 	cpg_clocks: cpg_clocks@ffc80000 {
 		compatible = "renesas,r8a7779-cpg-clocks";
-		reg = <0 0xffc80000 0 0x30>;
+		reg = <0xffc80000 0x30>;
 		clocks = <&extal_clk>;
 		#clock-cells = <1>;
 		clock-output-names = "plla", "z", "zs", "s", "s1", "p",
 		                     "b", "out";
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSTP Clock Domain member device node:
+
+	sata: sata@fc600000 {
+		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
+		reg = <0xfc600000 0x2000>;
+		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+		power-domains = <&cpg_clocks>;
 	};
diff --git a/dts/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/dts/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index 56f111bd3e..2a9a8edc8f 100644
--- a/dts/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -2,6 +2,8 @@
 
 The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
 and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
 
 Required Properties:
 
@@ -20,10 +22,18 @@ Required Properties:
   - clock-output-names: The names of the clocks. Supported clocks are "main",
     "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
     "adsp"
+  - #power-domain-cells: Must be 0
 
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
 
-Example
--------
+
+Examples
+--------
+
+  - CPG device node:
 
 	cpg_clocks: cpg_clocks@e6150000 {
 		compatible = "renesas,r8a7790-cpg-clocks",
@@ -34,4 +44,16 @@ Example
 		clock-output-names = "main", "pll0, "pll1", "pll3",
 				     "lb", "qspi", "sdh", "sd0", "sd1", "z",
 				     "rcan", "adsp";
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSTP Clock Domain member device node:
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+		power-domains = <&cpg_clocks>;
 	};
diff --git a/dts/Bindings/clock/renesas,rz-cpg-clocks.txt b/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
index b0f7ddb8cd..bb51a33a1f 100644
--- a/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
@@ -2,6 +2,8 @@
 
 The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable
 CPU and GPU clocks, and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
 
 Required Properties:
 
@@ -14,10 +16,18 @@ Required Properties:
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are "pll",
     "i", and "g"
+  - #power-domain-cells: Must be 0
 
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
 
-Example
--------
+
+Examples
+--------
+
+  - CPG device node:
 
 	cpg_clocks: cpg_clocks@fcfe0000 {
 		#clock-cells = <1>;
@@ -26,4 +36,19 @@ Example
 		reg = <0xfcfe0000 0x18>;
 		clocks = <&extal_clk>, <&usb_x1_clk>;
 		clock-output-names = "pll", "i", "g";
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSTP Clock Domain member device node:
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/rockchip,rk3368-cru.txt b/dts/Bindings/clock/rockchip,rk3368-cru.txt
new file mode 100644
index 0000000000..7c8bbcfed8
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3368-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3368-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/dts/Bindings/clock/st/st,clkgen-pll.txt b/dts/Bindings/clock/st/st,clkgen-pll.txt
index efb51cf0c8..d8b168ebd5 100644
--- a/dts/Bindings/clock/st/st,clkgen-pll.txt
+++ b/dts/Bindings/clock/st/st,clkgen-pll.txt
@@ -21,8 +21,8 @@ Required properties:
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
+	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
+	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
diff --git a/dts/Bindings/clock/ux500.txt b/dts/Bindings/clock/ux500.txt
new file mode 100644
index 0000000000..e52bd4b723
--- /dev/null
+++ b/dts/Bindings/clock/ux500.txt
@@ -0,0 +1,64 @@
+Clock bindings for ST-Ericsson Ux500 clocks
+
+Required properties :
+- compatible : shall contain only one of the following:
+  "stericsson,u8500-clks"
+  "stericsson,u8540-clks"
+  "stericsson,u9540-clks"
+- reg : shall contain base register location and length for
+  CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
+  CLKRST4, which does not exist.
+
+Required subnodes:
+- prcmu-clock: a subnode with one clock cell for PRCMU (power,
+  reset, control unit) clocks. The cell indicates which PRCMU
+  clock in the prcmu-clock node the consumer wants to use.
+- prcc-periph-clock: a subnode with two clock cells for
+  PRCC (programmable reset- and clock controller) peripheral clocks.
+  The first cell indicates which PRCC block the consumer
+  wants to use, possible values are 1, 2, 3, 5, 6. The second
+  cell indicates which clock inside the PRCC block it wants,
+  possible values are 0 thru 31.
+- prcc-kernel-clock: a subnode with two clock cells for
+  PRCC (programmable reset- and clock controller) kernel clocks
+  The first cell indicates which PRCC block the consumer
+  wants to use, possible values are 1, 2, 3, 5, 6. The second
+  cell indicates which clock inside the PRCC block it wants,
+  possible values are 0 thru 31.
+- rtc32k-clock: a subnode with zero clock cells for the 32kHz
+  RTC clock.
+- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
+  with zero clock cells.
+
+Example:
+
+clocks {
+	compatible = "stericsson,u8500-clks";
+	/*
+	 * Registers for the CLKRST block on peripheral
+	 * groups 1, 2, 3, 5, 6,
+	 */
+	reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+	    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+	    <0xa03cf000 0x1000>;
+
+	prcmu_clk: prcmu-clock {
+		#clock-cells = <1>;
+	};
+
+	prcc_pclk: prcc-periph-clock {
+		#clock-cells = <2>;
+	};
+
+	prcc_kclk: prcc-kernel-clock {
+		#clock-cells = <2>;
+	};
+
+	rtc_clk: rtc32k-clock {
+		#clock-cells = <0>;
+	};
+
+	smp_twd_clk: smp-twd-clock {
+		#clock-cells = <0>;
+	};
+};