dts: update to v5.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

15 files changed, 273 insertions, 13 deletions

diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
index 3a88052803..79511d7bb3 100644
--- a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -11,6 +11,13 @@ Required Properties:
 	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
 	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
 	followed by the common "amlogic,meson-gx-aoclkc"
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+  * "xtal"     : the platform xtal
+  * "mpeg-clk" : the main clock controller mother clock (aka clk81)
+  * "ext-32k-0"  : external 32kHz reference #0 if any (optional)
+  * "ext-32k-1"  : external 32kHz reference #1 if any (optional - gx only)
+  * "ext-32k-2"  : external 32kHz reference #2 if any (optional - gx only)
 
 - #clock-cells: should be 1.
 
@@ -40,8 +47,9 @@ ao_sysctrl: sys-ctrl@0 {
 		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		clocks = <&xtal>, <&clkc CLKID_CLK81>;
+		clock-names = "xtal", "mpeg-clk";
 	};
-};
 
 Example: UART controller node that consumes the clock and reset generated
   by the clock controller:
diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.txt b/dts/Bindings/clock/amlogic,gxbb-clkc.txt
index e950599566..a6871953bf 100644
--- a/dts/Bindings/clock/amlogic,gxbb-clkc.txt
+++ b/dts/Bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,9 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+- clocks : list of clock phandle, one for each entry clock-names.
+- clock-names : should contain the following:
+  * "xtal": the platform xtal
 
 - #clock-cells: should be 1.
 
@@ -31,6 +34,8 @@ sysctrl: system-controller@0 {
 	clkc: clock-controller {
 		#clock-cells = <1>;
 		compatible = "amlogic,gxbb-clkc";
+		clocks = <&xtal>;
+		clock-names = "xtal";
 	};
 };
 
diff --git a/dts/Bindings/clock/amlogic,meson8b-clkc.txt b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
index b455c5aa91..4d94091c1d 100644
--- a/dts/Bindings/clock/amlogic,meson8b-clkc.txt
+++ b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
@@ -9,15 +9,13 @@ Required Properties:
 	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
 	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
 	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
-- reg: it must be composed by two tuples:
-	0) physical base address of the xtal register and length of memory
-	   mapped region.
-	1) physical base address of the clock controller and length of memory
-	   mapped region.
-
 - #clock-cells: should be 1.
 - #reset-cells: should be 1.
 
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
+
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
 preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
@@ -30,9 +28,8 @@ device tree sources).
 
 Example: Clock controller node:
 
-	clkc: clock-controller@c1104000 {
+	clkc: clock-controller {
 		compatible = "amlogic,meson8b-clkc";
-		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
diff --git a/dts/Bindings/clock/imx6q-clock.txt b/dts/Bindings/clock/imx6q-clock.txt
index e1308346e0..13d36d4c69 100644
--- a/dts/Bindings/clock/imx6q-clock.txt
+++ b/dts/Bindings/clock/imx6q-clock.txt
@@ -13,6 +13,9 @@ Optional properties:
   management IC (PMIC) triggered via PMIC_STBY_REQ signal.
   Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
   be using "syscon-poweroff" driver instead.
+- clocks: list of clock specifiers, must contain an entry for each entry
+          in clock-names
+- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
 
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
diff --git a/dts/Bindings/clock/imx7ulp-clock.txt b/dts/Bindings/clock/imx7ulp-clock.txt
new file mode 100644
index 0000000000..a4f8cd478f
--- /dev/null
+++ b/dts/Bindings/clock/imx7ulp-clock.txt
@@ -0,0 +1,104 @@
+* Clock bindings for Freescale i.MX7ULP
+
+i.MX7ULP Clock functions are under joint control of the System
+Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+modules, and Core Mode Controller (CMC)1 blocks
+
+The clocking scheme provides clear separation between M4 domain
+and A7 domain. Except for a few clock sources shared between two
+domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+and and the Fast IRC clock (FIRCLK), clock sources and clock
+management are separated and contained within each domain.
+
+M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+Note: this binding doc is only for A7 clock domain.
+
+System Clock Generation (SCG) modules:
+---------------------------------------------------------------------
+The System Clock Generation (SCG) is responsible for clock generation
+and distribution across this device. Functions performed by the SCG
+include: clock reference selection, generation of clock used to derive
+processor, system, peripheral bus and external memory interface clocks,
+source selection for peripheral clocks and control of power saving
+clock gating mode.
+
+Required properties:
+
+- compatible:	Should be "fsl,imx7ulp-scg1".
+- reg : 	Should contain registers location and length.
+- #clock-cells:	Should be <1>.
+- clocks:	Should contain the fixed input clocks.
+- clock-names:  Should contain the following clock names:
+		"rosc", "sosc", "sirc", "firc", "upll", "mpll".
+
+Peripheral Clock Control (PCC) modules:
+---------------------------------------------------------------------
+The Peripheral Clock Control (PCC) is responsible for clock selection,
+optional division and clock gating mode for peripherals in their
+respected power domain
+
+Required properties:
+- compatible:	Should be one of:
+		  "fsl,imx7ulp-pcc2",
+		  "fsl,imx7ulp-pcc3".
+- reg : 	Should contain registers location and length.
+- #clock-cells:	Should be <1>.
+- clocks:	Should contain the fixed input clocks.
+- clock-names:  Should contain the following clock names:
+		"nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2",
+		"apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk",
+		"mpll", "firc_bus_clk", "rosc", "spll_bus_clk";
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+See include/dt-bindings/clock/imx7ulp-clock.h
+for the full list of i.MX7ULP clock IDs of each module.
+
+Examples:
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+
+scg1: scg1@403e0000 {
+	compatible = "fsl,imx7ulp-scg1;
+	reg = <0x403e0000 0x10000>;
+	clocks = <&rosc>, <&sosc>, <&sirc>,
+		 <&firc>, <&upll>, <&mpll>;
+	clock-names = "rosc", "sosc", "sirc",
+		      "firc", "upll", "mpll";
+	#clock-cells = <1>;
+};
+
+pcc2: pcc2@403f0000 {
+	compatible = "fsl,imx7ulp-pcc2";
+	reg = <0x403f0000 0x10000>;
+	#clock-cells = <1>;
+	clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+		 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+		 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+		 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+		 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+		 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+		 <&scg1 IMX7ULP_CLK_UPLL>,
+		 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+		 <&scg1 IMX7ULP_CLK_MIPI_PLL>,
+		 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+		 <&scg1 IMX7ULP_CLK_ROSC>,
+		 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+	clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+		      "apll_pfd2", "apll_pfd1", "apll_pfd0",
+		      "upll", "sosc_bus_clk", "mpll",
+		      "firc_bus_clk", "rosc", "spll_bus_clk";
+};
+
+usdhc1: usdhc@40380000 {
+	compatible = "fsl,imx7ulp-usdhc";
+	reg = <0x40380000 0x10000>;
+	interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+		 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+		 <&pcc2 IMX7ULP_CLK_USDHC1>;
+	clock-names ="ipg", "ahb", "per";
+	bus-width = <4>;
+};
diff --git a/dts/Bindings/clock/imx8mq-clock.txt b/dts/Bindings/clock/imx8mq-clock.txt
new file mode 100644
index 0000000000..52de8263e0
--- /dev/null
+++ b/dts/Bindings/clock/imx8mq-clock.txt
@@ -0,0 +1,20 @@
+* Clock bindings for NXP i.MX8M Quad
+
+Required properties:
+- compatible: Should be "fsl,imx8mq-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+          entry in clock-names
+- clock-names: should include the following entries:
+    - "ckil"
+    - "osc_25m"
+    - "osc_27m"
+    - "clk_ext1"
+    - "clk_ext2"
+    - "clk_ext3"
+    - "clk_ext4"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx8mq-clock.h
+for the full list of i.MX8M Quad clock IDs.
diff --git a/dts/Bindings/clock/imx8qxp-lpcg.txt b/dts/Bindings/clock/imx8qxp-lpcg.txt
new file mode 100644
index 0000000000..965cfa42e0
--- /dev/null
+++ b/dts/Bindings/clock/imx8qxp-lpcg.txt
@@ -0,0 +1,51 @@
+* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+The Low-Power Clock Gate (LPCG) modules contain a local programming
+model to control the clock gates for the peripherals. An LPCG module
+is used to locally gate the clocks for the associated peripheral.
+
+Note:
+This level of clock gating is provided after the clocks are generated
+by the SCU resources and clock controls. Thus even if the clock is
+enabled by these control bits, it might still not be running based
+on the base resource.
+
+Required properties:
+- compatible:	Should be one of:
+		  "fsl,imx8qxp-lpcg-adma",
+		  "fsl,imx8qxp-lpcg-conn",
+		  "fsl,imx8qxp-lpcg-dc",
+		  "fsl,imx8qxp-lpcg-dsp",
+		  "fsl,imx8qxp-lpcg-gpu",
+		  "fsl,imx8qxp-lpcg-hsio",
+		  "fsl,imx8qxp-lpcg-img",
+		  "fsl,imx8qxp-lpcg-lsio",
+		  "fsl,imx8qxp-lpcg-vpu"
+- reg:		Address and length of the register set
+- #clock-cells:	Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Examples:
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+
+conn_lpcg: clock-controller@5b200000 {
+	compatible = "fsl,imx8qxp-lpcg-conn";
+	reg = <0x5b200000 0xb0000>;
+	#clock-cells = <1>;
+};
+
+usdhc1: mmc@5b010000 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+	reg = <0x5b010000 0x10000>;
+	clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
+		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
+		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
+	clock-names = "ipg", "per", "ahb";
+};
diff --git a/dts/Bindings/clock/qcom,gcc.txt b/dts/Bindings/clock/qcom,gcc.txt
index 52d9345c99..8661c3cd3c 100644
--- a/dts/Bindings/clock/qcom,gcc.txt
+++ b/dts/Bindings/clock/qcom,gcc.txt
@@ -35,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be
 part of the GCC/clock-controller node.
 For more details on the TSENS properties please refer
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+- protected-clocks : Protected clock specifier list as per common clock
+ binding.
 
 Example:
 	clock-controller@900000 {
@@ -55,3 +57,17 @@ Example of GCC with TSENS properties:
 		#reset-cells = <1>;
 		#thermal-sensor-cells = <1>;
 	};
+
+Example of GCC with protected-clocks properties:
+	clock-controller@100000 {
+		compatible = "qcom,gcc-sdm845";
+		reg = <0x100000 0x1f0000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		protected-clocks = <GCC_QSPI_CORE_CLK>,
+				   <GCC_QSPI_CORE_CLK_SRC>,
+				   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				   <GCC_LPASS_Q6_AXI_CLK>,
+				   <GCC_LPASS_SWAY_CLK>;
+	};
diff --git a/dts/Bindings/clock/qcom,gpucc.txt b/dts/Bindings/clock/qcom,gpucc.txt
new file mode 100644
index 0000000000..4e5215ef1a
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gpucc.txt
@@ -0,0 +1,22 @@
+Qualcomm Graphics Clock & Reset Controller Binding
+--------------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-gpucc"
+- reg : shall contain base register location and length
+- #clock-cells : from common clock binding, shall contain 1
+- #reset-cells : from common reset binding, shall contain 1
+- #power-domain-cells : from generic power domain binding, shall contain 1
+- clocks : shall contain the XO clock
+- clock-names : shall be "xo"
+
+Example:
+	gpucc: clock-controller@5090000 {
+		compatible = "qcom,sdm845-gpucc";
+		reg = <0x5090000 0x9000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+	};
diff --git a/dts/Bindings/clock/qcom,lpasscc.txt b/dts/Bindings/clock/qcom,lpasscc.txt
new file mode 100644
index 0000000000..b9e9787045
--- /dev/null
+++ b/dts/Bindings/clock/qcom,lpasscc.txt
@@ -0,0 +1,26 @@
+Qualcomm LPASS Clock Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible		: shall contain "qcom,sdm845-lpasscc"
+- #clock-cells		: from common clock binding, shall contain 1.
+- reg			: shall contain base register address and size,
+			  in the order
+			Index-0 maps to LPASS_CC register region
+			Index-1 maps to LPASS_QDSP6SS register region
+
+Optional properties :
+- reg-names	: register names of LPASS domain
+		 "cc", "qdsp6ss".
+
+Example:
+
+The below node has to be defined in the cases where the LPASS peripheral loader
+would bring the subsystem out of reset.
+
+	lpasscc: clock-controller@17014000 {
+		compatible = "qcom,sdm845-lpasscc";
+		reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+		reg-names = "cc", "qdsp6ss";
+		#clock-cells = <1>;
+	};
diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt
index 4491d1c104..87b4949e9b 100644
--- a/dts/Bindings/clock/qcom,rpmcc.txt
+++ b/dts/Bindings/clock/qcom,rpmcc.txt
@@ -16,6 +16,7 @@ Required properties :
 			"qcom,rpmcc-msm8974", "qcom,rpmcc"
 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
 			"qcom,rpmcc-msm8996", "qcom,rpmcc"
+			"qcom,rpmcc-qcs404", "qcom,rpmcc"
 
 - #clock-cells : shall contain 1
 
diff --git a/dts/Bindings/clock/qcom,videocc.txt b/dts/Bindings/clock/qcom,videocc.txt
index e7c035afa7..8a8622c65c 100644
--- a/dts/Bindings/clock/qcom,videocc.txt
+++ b/dts/Bindings/clock/qcom,videocc.txt
@@ -6,8 +6,6 @@ Required properties :
 - reg : shall contain base register location and length
 - #clock-cells : from common clock binding, shall contain 1.
 - #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Optional properties :
 - #reset-cells : from common reset binding, shall contain 1.
 
 Example:
@@ -16,4 +14,5 @@ Example:
 		reg = <0xab00000 0x10000>;
 		#clock-cells = <1>;
 		#power-domain-cells = <1>;
+		#reset-cells = <1>;
 	};
diff --git a/dts/Bindings/clock/qoriq-clock.txt b/dts/Bindings/clock/qoriq-clock.txt
index 97f46adac8..c655f28d59 100644
--- a/dts/Bindings/clock/qoriq-clock.txt
+++ b/dts/Bindings/clock/qoriq-clock.txt
@@ -28,6 +28,12 @@ Required properties:
 	* "fsl,p4080-clockgen"
 	* "fsl,p5020-clockgen"
 	* "fsl,p5040-clockgen"
+	* "fsl,t1023-clockgen"
+	* "fsl,t1024-clockgen"
+	* "fsl,t1040-clockgen"
+	* "fsl,t1042-clockgen"
+	* "fsl,t2080-clockgen"
+	* "fsl,t2081-clockgen"
 	* "fsl,t4240-clockgen"
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
diff --git a/dts/Bindings/clock/sun8i-de2.txt b/dts/Bindings/clock/sun8i-de2.txt
index e94582e8b8..41a52c2acf 100644
--- a/dts/Bindings/clock/sun8i-de2.txt
+++ b/dts/Bindings/clock/sun8i-de2.txt
@@ -1,5 +1,5 @@
-Allwinner Display Engine 2.0 Clock Control Binding
---------------------------------------------------
+Allwinner Display Engine 2.0/3.0 Clock Control Binding
+------------------------------------------------------
 
 Required properties :
 - compatible: must contain one of the following compatibles:
@@ -8,6 +8,7 @@ Required properties :
 		- "allwinner,sun8i-v3s-de2-clk"
 		- "allwinner,sun50i-a64-de2-clk"
 		- "allwinner,sun50i-h5-de2-clk"
+		- "allwinner,sun50i-h6-de3-clk"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the clocks feeding the display engine subsystem.
diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt
index 47d2e902ce..e3bd88ae45 100644
--- a/dts/Bindings/clock/sunxi-ccu.txt
+++ b/dts/Bindings/clock/sunxi-ccu.txt
@@ -22,6 +22,7 @@ Required properties :
 		- "allwinner,sun50i-h5-ccu"
 		- "allwinner,sun50i-h6-ccu"
 		- "allwinner,sun50i-h6-r-ccu"
+		- "allwinner,suniv-f1c100s-ccu"
 		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length