dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

19 files changed, 320 insertions, 44 deletions

diff --git a/dts/Bindings/clock/brcm,bcm2835-cprman.txt b/dts/Bindings/clock/brcm,bcm2835-cprman.txt
index e56a1df3a9..dd906db34b 100644
--- a/dts/Bindings/clock/brcm,bcm2835-cprman.txt
+++ b/dts/Bindings/clock/brcm,bcm2835-cprman.txt
@@ -16,7 +16,20 @@ Required properties:
 - #clock-cells:	Should be <1>. The permitted clock-specifier values can be
 		  found in include/dt-bindings/clock/bcm2835.h
 - reg:		Specifies base physical address and size of the registers
-- clocks:	The external oscillator clock phandle
+- clocks:	phandles to the parent clocks used as input to the module, in
+		  the following order:
+
+		  - External oscillator
+		  - DSI0 byte clock
+		  - DSI0 DDR2 clock
+		  - DSI0 DDR clock
+		  - DSI1 byte clock
+		  - DSI1 DDR2 clock
+		  - DSI1 DDR clock
+
+		  Only external oscillator is required.  The DSI clocks may
+		  not be present, in which case their children will be
+		  unusable.
 
 Example:
 
diff --git a/dts/Bindings/clock/exynos4415-clock.txt b/dts/Bindings/clock/exynos4415-clock.txt
deleted file mode 100644
index 847d98bae8..0000000000
--- a/dts/Bindings/clock/exynos4415-clock.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos4415 Clock Controller
-
-The Exynos4415 clock controller generates and supplies clock to various
-consumer devices within the Exynos4415 SoC.
-
-Required properties:
-
-- compatible: should be one of the following:
-  - "samsung,exynos4415-cmu" - for the main system clocks controller
-    (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains).
-  - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory
-    Controller (DMC) domain clock controller.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos4415.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	cmu: clock-controller@10030000 {
-		compatible = "samsung,exynos4415-cmu";
-		reg = <0x10030000 0x18000>;
-		#clock-cells = <1>;
-	};
-
-	cmu-dmc: clock-controller@105C0000 {
-		compatible = "samsung,exynos4415-cmu-dmc";
-		reg = <0x105C0000 0x3000>;
-		#clock-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/hi3660-clock.txt b/dts/Bindings/clock/hi3660-clock.txt
new file mode 100644
index 0000000000..cc9b86c357
--- /dev/null
+++ b/dts/Bindings/clock/hi3660-clock.txt
@@ -0,0 +1,42 @@
+* Hisilicon Hi3660 Clock Controller
+
+The Hi3660 clock controller generates and supplies clock to various
+controllers within the Hi3660 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi3660-crgctrl"
+	- "hisilicon,hi3660-pctrl"
+	- "hisilicon,hi3660-pmuctrl"
+	- "hisilicon,hi3660-sctrl"
+	- "hisilicon,hi3660-iomcu"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>.
+
+Examples:
+	crg_ctrl: clock-controller@fff35000 {
+		compatible = "hisilicon,hi3660-crgctrl", "syscon";
+		reg = <0x0 0xfff35000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@fdf02000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0xfdf02000 0x0 0x1000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+			 <&crg_ctrl HI3660_PCLK>;
+		clock-names = "uartclk", "apb_pclk";
+		status = "disabled";
+	};
diff --git a/dts/Bindings/clock/idt,versaclock5.txt b/dts/Bindings/clock/idt,versaclock5.txt
new file mode 100644
index 0000000000..87e9c47a89
--- /dev/null
+++ b/dts/Bindings/clock/idt,versaclock5.txt
@@ -0,0 +1,65 @@
+Binding for IDT VersaClock5 programmable i2c clock generator.
+
+The IDT VersaClock5 are programmable i2c clock generators providing
+from 3 to 12 output clocks.
+
+==I2C device node==
+
+Required properties:
+- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933".
+- reg:		i2c device address, shall be 0x68 or 0x6a.
+- #clock-cells:	from common clock binding; shall be set to 1.
+- clocks:	from common clock binding; list of parent clock handles,
+		- 5p49v5923: (required) either or both of XTAL or CLKIN
+					reference clock.
+		- 5p49v5933: (optional) property not present (internal
+					Xtal used) or CLKIN reference
+					clock.
+- clock-names:	from common clock binding; clock input names, can be
+		- 5p49v5923: (required) either or both of "xin", "clkin".
+		- 5p49v5933: (optional) property not present or "clkin".
+
+==Mapping between clock specifier and physical pins==
+
+When referencing the provided clock in the DT using phandle and
+clock specifier, the following mapping applies:
+
+5P49V5923:
+	0 -- OUT0_SEL_I2CB
+	1 -- OUT1
+	2 -- OUT2
+
+5P49V5933:
+	0 -- OUT0_SEL_I2CB
+	1 -- OUT1
+	2 -- OUT4
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25m {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* IDT 5P49V5923 i2c clock generator */
+	vc5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+
+		/* Connect XIN input to 25MHz reference */
+		clocks = <&ref25m>;
+		clock-names = "xin";
+	};
+};
+
+/* Consumer referencing the 5P49V5923 pin OUT1 */
+consumer {
+	...
+	clocks = <&vc5 1>;
+	...
+}
diff --git a/dts/Bindings/clock/mvebu-corediv-clock.txt b/dts/Bindings/clock/mvebu-corediv-clock.txt
index 520562a7dc..c7b4e3a6b2 100644
--- a/dts/Bindings/clock/mvebu-corediv-clock.txt
+++ b/dts/Bindings/clock/mvebu-corediv-clock.txt
@@ -7,6 +7,7 @@ Required properties:
 - compatible : must be "marvell,armada-370-corediv-clock",
 		       "marvell,armada-375-corediv-clock",
 		       "marvell,armada-380-corediv-clock",
+                       "marvell,mv98dx3236-corediv-clock",
 
 - reg : must be the register address of Core Divider control register
 - #clock-cells : from common clock binding; shall be set to 1
diff --git a/dts/Bindings/clock/mvebu-cpu-clock.txt b/dts/Bindings/clock/mvebu-cpu-clock.txt
index 99c214660b..7f28506eae 100644
--- a/dts/Bindings/clock/mvebu-cpu-clock.txt
+++ b/dts/Bindings/clock/mvebu-cpu-clock.txt
@@ -3,6 +3,7 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+	"marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
 - reg : Address and length of the clock complex register set, followed
         by address and length of the PMU DFS registers
 - #clock-cells : should be set to 1.
diff --git a/dts/Bindings/clock/mvebu-gated-clock.txt b/dts/Bindings/clock/mvebu-gated-clock.txt
index cb8542d910..5142efc809 100644
--- a/dts/Bindings/clock/mvebu-gated-clock.txt
+++ b/dts/Bindings/clock/mvebu-gated-clock.txt
@@ -117,7 +117,7 @@ ID	Clock	Peripheral
 25	tdm	Time Division Mplx
 28	xor1	XOR DMA 1
 29	sata1lnk
-30	sata1	SATA Host 0
+30	sata1	SATA Host 1
 
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral
diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt
index 87d3714b95..a7235e9e1c 100644
--- a/dts/Bindings/clock/qcom,rpmcc.txt
+++ b/dts/Bindings/clock/qcom,rpmcc.txt
@@ -11,6 +11,7 @@ Required properties :
                compatible "qcom,rpmcc" should be also included.
 
 			"qcom,rpmcc-msm8916", "qcom,rpmcc"
+			"qcom,rpmcc-msm8974", "qcom,rpmcc"
 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
 
 - #clock-cells : shall contain 1
diff --git a/dts/Bindings/clock/qoriq-clock.txt b/dts/Bindings/clock/qoriq-clock.txt
index df9cb5ac5f..aa3526f229 100644
--- a/dts/Bindings/clock/qoriq-clock.txt
+++ b/dts/Bindings/clock/qoriq-clock.txt
@@ -31,6 +31,7 @@ Required properties:
 	* "fsl,t4240-clockgen"
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
+	* "fsl,ls1012a-clockgen"
 	* "fsl,ls1021a-clockgen"
 	* "fsl,ls1043a-clockgen"
 	* "fsl,ls1046a-clockgen"
diff --git a/dts/Bindings/clock/renesas,cpg-mssr.txt b/dts/Bindings/clock/renesas,cpg-mssr.txt
index c469194129..f4f944d813 100644
--- a/dts/Bindings/clock/renesas,cpg-mssr.txt
+++ b/dts/Bindings/clock/renesas,cpg-mssr.txt
@@ -42,6 +42,10 @@ Required Properties:
 	Domain bindings in
 	Documentation/devicetree/bindings/power/power_domain.txt.
 
+  - #reset-cells: Must be 1
+      - The single reset specifier cell must be the module number, as defined
+	in the datasheet.
+
 
 Examples
 --------
@@ -55,6 +59,7 @@ Examples
 		clock-names = "extal", "extalr";
 		#clock-cells = <2>;
 		#power-domain-cells = <0>;
+		#reset-cells = <1>;
 	};
 
 
@@ -69,5 +74,6 @@ Examples
 		dmas = <&dmac1 0x13>, <&dmac1 0x12>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg>;
+		resets = <&cpg 310>;
 		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/rockchip,rk3328-cru.txt b/dts/Bindings/clock/rockchip,rk3328-cru.txt
new file mode 100644
index 0000000000..e71c675ba5
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3328-cru.txt
@@ -0,0 +1,57 @@
+* Rockchip RK3328 Clock and Reset Unit
+
+The RK3328 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3328-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@ff120000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0xff120000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/dts/Bindings/clock/rockchip,rk3399-cru.txt b/dts/Bindings/clock/rockchip,rk3399-cru.txt
index 3888dd33fc..3bc56fae90 100644
--- a/dts/Bindings/clock/rockchip,rk3399-cru.txt
+++ b/dts/Bindings/clock/rockchip,rk3399-cru.txt
@@ -13,6 +13,12 @@ Required Properties:
 - #clock-cells: should be 1.
 - #reset-cells: should be 1.
 
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files".
+  It is used for GRF muxes, if missing any muxes present in the GRF will not
+  be available.
+
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
 preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
diff --git a/dts/Bindings/clock/st,stm32-rcc.txt b/dts/Bindings/clock/st,stm32-rcc.txt
index 0532d815da..b240121d2a 100644
--- a/dts/Bindings/clock/st,stm32-rcc.txt
+++ b/dts/Bindings/clock/st,stm32-rcc.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible: Should be:
   "st,stm32f42xx-rcc"
   "st,stm32f469-rcc"
+  "st,stm32f746-rcc"
 - reg: should be register base and length as documented in the
   datasheet
 - #reset-cells: 1, see below
@@ -17,6 +18,9 @@ Required properties:
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
   use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
 
 Example:
 
@@ -25,6 +29,7 @@ Example:
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
 	};
 
 Specifying gated clocks
@@ -66,6 +71,38 @@ The secondary index is bound with the following magic numbers:
 
 	0	SYSTICK
 	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
+
+	14	CLK_HSI		(Internal ocscillator clock)
+	15	CLK_SYSCLK	(System Clock)
+	16	CLK_HDMI_CEC	(HDMI-CEC clock)
+	17	CLK_SPDIF	(SPDIF-Rx clock)
+	18	CLK_USART1	(U(s)arts clocks)
+	19	CLK_USART2
+	20	CLK_USART3
+	21	CLK_UART4
+	22	CLK_UART5
+	23	CLK_USART6
+	24	CLK_UART7
+	25	CLK_UART8
+	26	CLK_I2C1	(I2S clocks)
+	27	CLK_I2C2
+	28	CLK_I2C3
+	29	CLK_I2C4
+	30	CLK_LPTIMER	(LPTimer1 clock)
+)
 
 Example:
 
diff --git a/dts/Bindings/clock/stericsson,abx500.txt b/dts/Bindings/clock/stericsson,abx500.txt
new file mode 100644
index 0000000000..dbaa886b22
--- /dev/null
+++ b/dts/Bindings/clock/stericsson,abx500.txt
@@ -0,0 +1,20 @@
+Clock bindings for ST-Ericsson ABx500 clocks
+
+Required properties :
+- compatible : shall contain the following:
+  "stericsson,ab8500-clk"
+- #clock-cells should be <1>
+
+The ABx500 clocks need to be placed as a subnode of an AB8500
+device node, see mfd/ab8500.txt
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/ste-ab8500.h header and can be used in device
+tree sources.
+
+Example:
+
+clock-controller {
+	compatible = "stericsson,ab8500-clk";
+	#clock-cells = <1>;
+};
diff --git a/dts/Bindings/clock/sun9i-de.txt b/dts/Bindings/clock/sun9i-de.txt
new file mode 100644
index 0000000000..fb18f327b9
--- /dev/null
+++ b/dts/Bindings/clock/sun9i-de.txt
@@ -0,0 +1,28 @@
+Allwinner A80 Display Engine Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun9i-a80-de-clks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+	  Three are needed:
+  - "mod": the display engine module clock
+  - "dram": the DRAM bus clock for the system
+  - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de_clocks: clock@3000000 {
+	compatible = "allwinner,sun9i-a80-de-clks";
+	reg = <0x03000000 0x30>;
+	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+	clock-names = "mod", "dram", "bus";
+	resets = <&ccu RST_BUS_DE>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/dts/Bindings/clock/sun9i-usb.txt b/dts/Bindings/clock/sun9i-usb.txt
new file mode 100644
index 0000000000..3564bd4f2a
--- /dev/null
+++ b/dts/Bindings/clock/sun9i-usb.txt
@@ -0,0 +1,24 @@
+Allwinner A80 USB Clock Control Binding
+---------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun9i-a80-usb-clocks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
+  - "bus": the bus clock for the whole USB subsystem
+  - "hosc": the high frequency oscillator (usually at 24MHz)
+- clock-names: Must contain the clock names described just above
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+usb_clocks: clock@a08000 {
+	compatible = "allwinner,sun9i-a80-usb-clks";
+	reg = <0x00a08000 0x8>;
+	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+	clock-names = "bus", "hosc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt
index 74d44a4273..bae5668cf4 100644
--- a/dts/Bindings/clock/sunxi-ccu.txt
+++ b/dts/Bindings/clock/sunxi-ccu.txt
@@ -7,6 +7,8 @@ Required properties :
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
+		- "allwinner,sun8i-v3s-ccu"
+		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
 
 - reg: Must contain the registers base address and length
diff --git a/dts/Bindings/clock/ti,cdce925.txt b/dts/Bindings/clock/ti,cdce925.txt
index 4c7669ad68..0d01f2d5cc 100644
--- a/dts/Bindings/clock/ti,cdce925.txt
+++ b/dts/Bindings/clock/ti,cdce925.txt
@@ -1,15 +1,22 @@
-Binding for TO CDCE925 programmable I2C clock synthesizers.
+Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
 
 Reference
 This binding uses the common clock binding[1].
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] http://www.ti.com/product/cdce925
+[2] http://www.ti.com/product/cdce913
+[3] http://www.ti.com/product/cdce925
+[4] http://www.ti.com/product/cdce937
+[5] http://www.ti.com/product/cdce949
 
 The driver provides clock sources for each output Y1 through Y5.
 
 Required properties:
- - compatible: Shall be "ti,cdce925"
+ - compatible: Shall be one of the following:
+	- "ti,cdce913": 1-PLL, 3 Outputs
+	- "ti,cdce925": 2-PLL, 5 Outputs
+	- "ti,cdce937": 3-PLL, 7 Outputs
+	- "ti,cdce949": 4-PLL, 9 Outputs
  - reg: I2C device address.
  - clocks: Points to a fixed parent clock that provides the input frequency.
  - #clock-cells: From common clock bindings: Shall be 1.
@@ -18,7 +25,7 @@ Optional properties:
  - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
                  board, or to compensate for external influences.
 
-For both PLL1 and PLL2 an optional child node can be used to specify spread
+For all PLL1, PLL2, ... an optional child node can be used to specify spread
 spectrum clocking parameters for a board.
   - spread-spectrum: SSC mode as defined in the data sheet.
   - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
diff --git a/dts/Bindings/clock/zx296718-clk.txt b/dts/Bindings/clock/zx296718-clk.txt
index 8c18b7b237..4ad7038084 100644
--- a/dts/Bindings/clock/zx296718-clk.txt
+++ b/dts/Bindings/clock/zx296718-clk.txt
@@ -13,6 +13,9 @@ Required properties:
 	"zte,zx296718-lsp1crm":
 		zx296718 device level clock selection and gating
 
+	"zte,zx296718-audiocrm":
+		zx296718 audio clock selection, divider and gating
+
 - reg: Address and length of the register set
 
 The clock consumer should specify the desired clock by having the clock