dts: update to v3.17-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

25 files changed, 655 insertions, 398 deletions

diff --git a/dts/Bindings/clock/arm-integrator.txt b/dts/Bindings/clock/arm-integrator.txt
index 652914b17b..ecc69520bc 100644
--- a/dts/Bindings/clock/arm-integrator.txt
+++ b/dts/Bindings/clock/arm-integrator.txt
@@ -1,4 +1,4 @@
-Clock bindings for ARM Integrator Core Module clocks
+Clock bindings for ARM Integrator and Versatile Core Module clocks
 
 Auxilary Oscillator Clock
 
@@ -12,7 +12,7 @@ parent node.
 
 
 Required properties:
-- compatible: must be "arm,integrator-cm-auxosc"
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
 - #clock-cells: must be <0>
 
 Optional properties:
diff --git a/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt b/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 0000000000..4208886d83
--- /dev/null
+++ b/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible :	"ti,palmas-clk32kg" for clk32kg clock
+		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+	enable/disable of clocks.  The external enable input pins ENABLE1,
+	ENABLE2 and NSLEEP. The valid values for the external pins are:
+		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+	Option 0 or missing this property means the clock is enabled/disabled
+	via register access and these pins do not have any control.
+	The macros of external control pins for DTS is defined at
+	dt-bindings/mfd/palmas.h
+
+Example:
+	#include <dt-bindings/mfd/palmas.h>
+	...
+	palmas: tps65913@58 {
+		...
+		clk32kg: palmas_clk32k@0 {
+			compatible = "ti,palmas-clk32kg";
+			#clock-cells = <0>;
+			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+		};
+		...
+	};
diff --git a/dts/Bindings/clock/clk-s5pv210-audss.txt b/dts/Bindings/clock/clk-s5pv210-audss.txt
new file mode 100644
index 0000000000..4fc869b69d
--- /dev/null
+++ b/dts/Bindings/clock/clk-s5pv210-audss.txt
@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+  - hclk: AHB bus clock of the Audio Subsystem.
+  - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+    not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+    a clock named "xxti".
+  - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+  - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+    specified, it is fixed to a clock named "iiscdclk0".
+  - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+  "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+	clk_audss: clock-controller@c0900000 {
+		compatible = "samsung,s5pv210-audss-clock";
+		reg = <0xc0900000 0x1000>;
+		#clock-cells = <1>;
+		clock-names = "hclk", "xxti",
+				"fout_epll", "sclk_audio0";
+		clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+	};
+
+Example: I2S controller node that consumes the clock generated by the clock
+	 controller. Refer to the standard clock bindings for information
+         about 'clocks' and 'clock-names' property.
+
+	i2s0: i2s@03830000 {
+		/* ... */
+		clock-names = "iis", "i2s_opclk0",
+				"i2s_opclk1";
+		clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+				<&clk_audss CLK_DOUT_AUD_BUS>;
+		/* ... */
+	};
diff --git a/dts/Bindings/clock/clock-bindings.txt b/dts/Bindings/clock/clock-bindings.txt
index f15787817d..06fc6d541c 100644
--- a/dts/Bindings/clock/clock-bindings.txt
+++ b/dts/Bindings/clock/clock-bindings.txt
@@ -131,3 +131,39 @@ clock signal, and a UART.
   ("pll" and "pll-switched").
 * The UART has its baud clock connected the external oscillator and its
   register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms may require initial configuration of default parent clocks
+and clock frequencies. Such a configuration can be specified in a device tree
+node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
+properties. The assigned-clock-parents property should contain a list of parent
+clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
+property the list of assigned clock frequency values - corresponding to clocks
+listed in the assigned-clocks property.
+
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+    uart@a000 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        ...
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+
+        assigned-clocks = <&clkcon 0>, <&pll 2>;
+        assigned-clock-parents = <&pll 2>;
+        assigned-clock-rates = <0>, <460800>;
+    };
+
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
+the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that consumes
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices can
+be similarly specified in the clock provider node.
diff --git a/dts/Bindings/clock/clps711x-clock.txt b/dts/Bindings/clock/clps711x-clock.txt
new file mode 100644
index 0000000000..ce5a7476f0
--- /dev/null
+++ b/dts/Bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible       : Shall contain "cirrus,clps711x-clk".
+- reg              : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells     : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+	clks: clks@80000000 {
+		#clock-cells = <1>;
+		compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
+		reg = <0x80000000 0xc000>;
+		startup-frequency = <73728000>;
+	};
diff --git a/dts/Bindings/clock/imx1-clock.txt b/dts/Bindings/clock/imx1-clock.txt
new file mode 100644
index 0000000000..b7adf4e3ea
--- /dev/null
+++ b/dts/Bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};
diff --git a/dts/Bindings/clock/imx21-clock.txt b/dts/Bindings/clock/imx21-clock.txt
new file mode 100644
index 0000000000..c3b0db437c
--- /dev/null
+++ b/dts/Bindings/clock/imx21-clock.txt
@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible  : Should be "fsl,imx21-ccm".
+- reg         : Address and length of the register set.
+- interrupts  : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx21-ccm";
+		reg = <0x10027000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+			 <&clks IMX21_CLK_PER1>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};
diff --git a/dts/Bindings/clock/imx27-clock.txt b/dts/Bindings/clock/imx27-clock.txt
index 6bc9fd2c66..cc05de9ec3 100644
--- a/dts/Bindings/clock/imx27-clock.txt
+++ b/dts/Bindings/clock/imx27-clock.txt
@@ -7,117 +7,22 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX27
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy                0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	mpll_main2           5
-	ahb                  6
-	ipg                  7
-	nfc_div              8
-	per1_div             9
-	per2_div             10
-	per3_div             11
-	per4_div             12
-	vpu_sel              13
-	vpu_div              14
-	usb_div              15
-	cpu_sel              16
-	clko_sel             17
-	cpu_div              18
-	clko_div             19
-	ssi1_sel             20
-	ssi2_sel             21
-	ssi1_div             22
-	ssi2_div             23
-	clko_en              24
-	ssi2_ipg_gate        25
-	ssi1_ipg_gate        26
-	slcdc_ipg_gate       27
-	sdhc3_ipg_gate       28
-	sdhc2_ipg_gate       29
-	sdhc1_ipg_gate       30
-	scc_ipg_gate         31
-	sahara_ipg_gate      32
-	rtc_ipg_gate         33
-	pwm_ipg_gate         34
-	owire_ipg_gate       35
-	lcdc_ipg_gate        36
-	kpp_ipg_gate         37
-	iim_ipg_gate         38
-	i2c2_ipg_gate        39
-	i2c1_ipg_gate        40
-	gpt6_ipg_gate        41
-	gpt5_ipg_gate        42
-	gpt4_ipg_gate        43
-	gpt3_ipg_gate        44
-	gpt2_ipg_gate        45
-	gpt1_ipg_gate        46
-	gpio_ipg_gate        47
-	fec_ipg_gate         48
-	emma_ipg_gate        49
-	dma_ipg_gate         50
-	cspi3_ipg_gate       51
-	cspi2_ipg_gate       52
-	cspi1_ipg_gate       53
-	nfc_baud_gate        54
-	ssi2_baud_gate       55
-	ssi1_baud_gate       56
-	vpu_baud_gate        57
-	per4_gate            58
-	per3_gate            59
-	per2_gate            60
-	per1_gate            61
-	usb_ahb_gate         62
-	slcdc_ahb_gate       63
-	sahara_ahb_gate      64
-	lcdc_ahb_gate        65
-	vpu_ahb_gate         66
-	fec_ahb_gate         67
-	emma_ahb_gate        68
-	emi_ahb_gate         69
-	dma_ahb_gate         70
-	csi_ahb_gate         71
-	brom_ahb_gate        72
-	ata_ahb_gate         73
-	wdog_ipg_gate        74
-	usb_ipg_gate         75
-	uart6_ipg_gate       76
-	uart5_ipg_gate       77
-	uart4_ipg_gate       78
-	uart3_ipg_gate       79
-	uart2_ipg_gate       80
-	uart1_ipg_gate       81
-	ckih_div1p5          82
-	fpm                  83
-	mpll_osc_sel         84
-	mpll_sel             85
-	spll_gate            86
-	mshc_div             87
-	rtic_ipg_gate        88
-	mshc_ipg_gate        89
-	rtic_ahb_gate        90
-	mshc_baud_gate       91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
 
 Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx27-ccm";
+		reg = <0x10027000 0x1000>;
+		#clock-cells = <1>;
+	};
 
-clks: ccm@10027000{
-	compatible = "fsl,imx27-ccm";
-	reg = <0x10027000 0x1000>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
-	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-	reg = <0x1000a000 0x1000>;
-	interrupts = <20>;
-	clocks = <&clks 81>, <&clks 61>;
-	clock-names = "ipg", "per";
-	status = "disabled";
-};
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+			 <&clks IMX27_CLK_PER1_GATE>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};
diff --git a/dts/Bindings/clock/imx6q-clock.txt b/dts/Bindings/clock/imx6q-clock.txt
index 90ec91fe5c..9252912a5b 100644
--- a/dts/Bindings/clock/imx6q-clock.txt
+++ b/dts/Bindings/clock/imx6q-clock.txt
@@ -7,223 +7,13 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	ckih			2
-	osc			3
-	pll2_pfd0_352m		4
-	pll2_pfd1_594m		5
-	pll2_pfd2_396m		6
-	pll3_pfd0_720m		7
-	pll3_pfd1_540m		8
-	pll3_pfd2_508m		9
-	pll3_pfd3_454m		10
-	pll2_198m		11
-	pll3_120m		12
-	pll3_80m		13
-	pll3_60m		14
-	twd			15
-	step			16
-	pll1_sw			17
-	periph_pre		18
-	periph2_pre		19
-	periph_clk2_sel		20
-	periph2_clk2_sel	21
-	axi_sel			22
-	esai_sel		23
-	asrc_sel		24
-	spdif_sel		25
-	gpu2d_axi		26
-	gpu3d_axi		27
-	gpu2d_core_sel		28
-	gpu3d_core_sel		29
-	gpu3d_shader_sel	30
-	ipu1_sel		31
-	ipu2_sel		32
-	ldb_di0_sel		33
-	ldb_di1_sel		34
-	ipu1_di0_pre_sel	35
-	ipu1_di1_pre_sel	36
-	ipu2_di0_pre_sel	37
-	ipu2_di1_pre_sel	38
-	ipu1_di0_sel		39
-	ipu1_di1_sel		40
-	ipu2_di0_sel		41
-	ipu2_di1_sel		42
-	hsi_tx_sel		43
-	pcie_axi_sel		44
-	ssi1_sel		45
-	ssi2_sel		46
-	ssi3_sel		47
-	usdhc1_sel		48
-	usdhc2_sel		49
-	usdhc3_sel		50
-	usdhc4_sel		51
-	enfc_sel		52
-	emi_sel			53
-	emi_slow_sel		54
-	vdo_axi_sel		55
-	vpu_axi_sel		56
-	cko1_sel		57
-	periph			58
-	periph2			59
-	periph_clk2		60
-	periph2_clk2		61
-	ipg			62
-	ipg_per			63
-	esai_pred		64
-	esai_podf		65
-	asrc_pred		66
-	asrc_podf		67
-	spdif_pred		68
-	spdif_podf		69
-	can_root		70
-	ecspi_root		71
-	gpu2d_core_podf		72
-	gpu3d_core_podf		73
-	gpu3d_shader		74
-	ipu1_podf		75
-	ipu2_podf		76
-	ldb_di0_podf		77
-	ldb_di1_podf		78
-	ipu1_di0_pre		79
-	ipu1_di1_pre		80
-	ipu2_di0_pre		81
-	ipu2_di1_pre		82
-	hsi_tx_podf		83
-	ssi1_pred		84
-	ssi1_podf		85
-	ssi2_pred		86
-	ssi2_podf		87
-	ssi3_pred		88
-	ssi3_podf		89
-	uart_serial_podf	90
-	usdhc1_podf		91
-	usdhc2_podf		92
-	usdhc3_podf		93
-	usdhc4_podf		94
-	enfc_pred		95
-	enfc_podf		96
-	emi_podf		97
-	emi_slow_podf		98
-	vpu_axi_podf		99
-	cko1_podf		100
-	axi			101
-	mmdc_ch0_axi_podf	102
-	mmdc_ch1_axi_podf	103
-	arm			104
-	ahb			105
-	apbh_dma		106
-	asrc			107
-	can1_ipg		108
-	can1_serial		109
-	can2_ipg		110
-	can2_serial		111
-	ecspi1			112
-	ecspi2			113
-	ecspi3			114
-	ecspi4			115
-	ecspi5			116
-	enet			117
-	esai			118
-	gpt_ipg			119
-	gpt_ipg_per		120
-	gpu2d_core		121
-	gpu3d_core		122
-	hdmi_iahb		123
-	hdmi_isfr		124
-	i2c1			125
-	i2c2			126
-	i2c3			127
-	iim			128
-	enfc			129
-	ipu1			130
-	ipu1_di0		131
-	ipu1_di1		132
-	ipu2			133
-	ipu2_di0		134
-	ldb_di0			135
-	ldb_di1			136
-	ipu2_di1		137
-	hsi_tx			138
-	mlb			139
-	mmdc_ch0_axi		140
-	mmdc_ch1_axi		141
-	ocram			142
-	openvg_axi		143
-	pcie_axi		144
-	pwm1			145
-	pwm2			146
-	pwm3			147
-	pwm4			148
-	per1_bch		149
-	gpmi_bch_apb		150
-	gpmi_bch		151
-	gpmi_io			152
-	gpmi_apb		153
-	sata			154
-	sdma			155
-	spba			156
-	ssi1			157
-	ssi2			158
-	ssi3			159
-	uart_ipg		160
-	uart_serial		161
-	usboh3			162
-	usdhc1			163
-	usdhc2			164
-	usdhc3			165
-	usdhc4			166
-	vdo_axi			167
-	vpu_axi			168
-	cko1			169
-	pll1_sys		170
-	pll2_bus		171
-	pll3_usb_otg		172
-	pll4_audio		173
-	pll5_video		174
-	pll8_mlb		175
-	pll7_usb_host		176
-	pll6_enet		177
-	ssi1_ipg		178
-	ssi2_ipg		179
-	ssi3_ipg		180
-	rom			181
-	usbphy1			182
-	usbphy2			183
-	ldb_di0_div_3_5		184
-	ldb_di1_div_3_5		185
-	sata_ref		186
-	sata_ref_100m		187
-	pcie_ref		188
-	pcie_ref_125m		189
-	enet_ref		190
-	usbphy1_gate		191
-	usbphy2_gate		192
-	pll4_post_div		193
-	pll5_post_div		194
-	pll5_video_div		195
-	eim_slow      		196
-	spdif      		197
-	cko2_sel      		198
-	cko2_podf      		199
-	cko2      		200
-	cko      		201
-	vdoa      		202
-	pll4_audio_div		203
-	lvds1_sel		204
-	lvds2_sel		205
-	lvds1_gate		206
-	lvds2_gate		207
-	esai_ahb		208
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
 
 Examples:
 
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
 clks: ccm@020c4000 {
 	compatible = "fsl,imx6q-ccm";
 	reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@ uart1: serial@02020000 {
 	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 	reg = <0x02020000 0x4000>;
 	interrupts = <0 26 0x04>;
-	clocks = <&clks 160>, <&clks 161>;
+	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };
diff --git a/dts/Bindings/clock/mvebu-cpu-clock.txt b/dts/Bindings/clock/mvebu-cpu-clock.txt
index feb8301307..99c214660b 100644
--- a/dts/Bindings/clock/mvebu-cpu-clock.txt
+++ b/dts/Bindings/clock/mvebu-cpu-clock.txt
@@ -3,14 +3,15 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
-- reg : Address and length of the clock complex register set
+- reg : Address and length of the clock complex register set, followed
+        by address and length of the PMU DFS registers
 - #clock-cells : should be set to 1.
 - clocks : shall be the input parent clock phandle for the clock.
 
 cpuclk: clock-complex@d0018700 {
 	#clock-cells = <1>;
 	compatible = "marvell,armada-xp-cpu-clock";
-	reg = <0xd0018700 0xA0>;
+	reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
 	clocks = <&coreclk 1>;
 }
 
diff --git a/dts/Bindings/clock/qcom,gcc.txt b/dts/Bindings/clock/qcom,gcc.txt
index 9cfcb4f2bc..aba3d254e0 100644
--- a/dts/Bindings/clock/qcom,gcc.txt
+++ b/dts/Bindings/clock/qcom,gcc.txt
@@ -5,6 +5,8 @@ Required properties :
 - compatible : shall contain only one of the following:
 
 			"qcom,gcc-apq8064"
+			"qcom,gcc-apq8084"
+			"qcom,gcc-ipq8064"
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8960"
 			"qcom,gcc-msm8974"
diff --git a/dts/Bindings/clock/qcom,mmcc.txt b/dts/Bindings/clock/qcom,mmcc.txt
index d572e9964c..29ebf84d25 100644
--- a/dts/Bindings/clock/qcom,mmcc.txt
+++ b/dts/Bindings/clock/qcom,mmcc.txt
@@ -4,6 +4,8 @@ Qualcomm Multimedia Clock & Reset Controller Binding
 Required properties :
 - compatible : shall contain only one of the following:
 
+			"qcom,mmcc-apq8064"
+			"qcom,mmcc-apq8084"
 			"qcom,mmcc-msm8660"
 			"qcom,mmcc-msm8960"
 			"qcom,mmcc-msm8974"
diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.txt b/dts/Bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 0000000000..0c2bf5eba4
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+			"rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.txt b/dts/Bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 0000000000..c9fbb76573
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/dts/Bindings/clock/rockchip.txt b/dts/Bindings/clock/rockchip.txt
index a891c823ed..22f6769e5d 100644
--- a/dts/Bindings/clock/rockchip.txt
+++ b/dts/Bindings/clock/rockchip.txt
@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
 
 == Gate clocks ==
 
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
 The gate registers form a continuos block which makes the dt node
 structure a matter of taste, as either all gates can be put into
 one gate clock spanning all registers or they can be divided into
diff --git a/dts/Bindings/clock/samsung,s5pv210-clock.txt b/dts/Bindings/clock/samsung,s5pv210-clock.txt
new file mode 100644
index 0000000000..effd9401c1
--- /dev/null
+++ b/dts/Bindings/clock/samsung,s5pv210-clock.txt
@@ -0,0 +1,78 @@
+* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
+
+Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
+controller, which generates and supplies clock to various controllers
+within the SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+	- "samsung,s5pv210-clock" : for clock controller of Samsung
+	  S5PC110/S5PV210 SoCs,
+	- "samsung,s5p6442-clock" : for clock controller of Samsung
+	  S5P6442 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
+the SoC,
+ - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
+pins of the SoC,
+
+A subset of above clocks available on given board shall be specified in
+board device tree, including the system base clock, as selected by XOM[0]
+pin of the SoC. Refer to generic fixed rate clock bindings
+documentation[1] for more information how to specify these clocks.
+
+[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s5pv210-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	xxti: clock-xxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	uart0: serial@e2900000 {
+		compatible = "samsung,s5pv210-uart";
+		reg = <0xe2900000 0x400>;
+		interrupt-parent = <&vic1>;
+		interrupts = <10>;
+		clock-names = "uart", "clk_uart_baud0",
+				"clk_uart_baud1";
+		clocks = <&clocks UART0>, <&clocks UART0>,
+				<&clocks SCLK_UART0>;
+		status = "disabled";
+	};
diff --git a/dts/Bindings/clock/st/st,clkgen-divmux.txt b/dts/Bindings/clock/st/st,clkgen-divmux.txt
index ae56315fce..6247652044 100644
--- a/dts/Bindings/clock/st/st,clkgen-divmux.txt
+++ b/dts/Bindings/clock/st/st,clkgen-divmux.txt
@@ -24,26 +24,26 @@ Required properties:
 
 Example:
 
-	clockgenA@fd345000 {
+	clockgen-a@fd345000 {
 		reg = <0xfd345000 0xb50>;
 
-		CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
+		clk_m_a1_div1: clk-m-a1-div1 {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-divmux-c32-odf1",
 				     "st,clkgena-divmux";
 
-			clocks = <&CLK_M_A1_OSC_PREDIV>,
-				 <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
-				 <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
-
-			clock-output-names = "CLK_M_RX_ICN_TS",
-					     "CLK_M_RX_ICN_VDP_0",
-					     "", /* Unused */
-					     "CLK_M_PRV_T1_BUS",
-					     "CLK_M_ICN_REG_12",
-					     "CLK_M_ICN_REG_10",
-					     "", /* Unused */
-					     "CLK_M_ICN_ST231";
+			clocks = <&clk_m_a1_osc_prediv>,
+				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+			clock-output-names = "clk-m-rx-icn-ts",
+					     "clk-m-rx-icn-vdp-0",
+					     "", /* unused */
+					     "clk-m-prv-t1-bus",
+					     "clk-m-icn-reg-12",
+					     "clk-m-icn-reg-10",
+					     "", /* unused */
+					     "clk-m-icn-st231";
 		};
 	};
 
diff --git a/dts/Bindings/clock/st/st,clkgen-mux.txt b/dts/Bindings/clock/st/st,clkgen-mux.txt
index 943e0808e2..f1fa91c687 100644
--- a/dts/Bindings/clock/st/st,clkgen-mux.txt
+++ b/dts/Bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
 	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
 	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
@@ -27,10 +27,10 @@ Required properties:
 
 Example:
 
-	CLK_M_HVA: CLK_M_HVA {
+	clk_m_hva: clk-m-hva@fd690868 {
 		#clock-cells = <0>;
 		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
 		reg = <0xfd690868 4>;
 
-		clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
 	};
diff --git a/dts/Bindings/clock/st/st,clkgen-pll.txt b/dts/Bindings/clock/st/st,clkgen-pll.txt
index 81eb3855ab..efb51cf0c8 100644
--- a/dts/Bindings/clock/st/st,clkgen-pll.txt
+++ b/dts/Bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
 	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
@@ -32,17 +35,17 @@ Required properties:
 
 Example:
 
-	clockgenA@fee62000 {
+	clockgen-a@fee62000 {
 		reg = <0xfee62000 0xb48>;
 
-		CLK_S_A0_PLL: CLK_S_A0_PLL {
+		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-plls-c65";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_S_A0_PLL0_HS",
-					     "CLK_S_A0_PLL0_LS",
-					     "CLK_S_A0_PLL1";
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
 		};
 	};
diff --git a/dts/Bindings/clock/st/st,clkgen-prediv.txt b/dts/Bindings/clock/st/st,clkgen-prediv.txt
index 566c9d79ed..604766c261 100644
--- a/dts/Bindings/clock/st/st,clkgen-prediv.txt
+++ b/dts/Bindings/clock/st/st,clkgen-prediv.txt
@@ -20,17 +20,17 @@ Required properties:
 
 Example:
 
-	clockgenA@fd345000 {
+	clockgen-a@fd345000 {
 		reg = <0xfd345000 0xb50>;
 
-		CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
+		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
 			#clock-cells = <0>;
 			compatible = "st,clkgena-prediv-c32",
 				     "st,clkgena-prediv";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_M_A2_OSC_PREDIV";
+			clock-output-names = "clk-m-a2-osc-prediv";
 		};
 	};
 
diff --git a/dts/Bindings/clock/st/st,clkgen-vcc.txt b/dts/Bindings/clock/st/st,clkgen-vcc.txt
index 4e3ff28b04..109b3eddcb 100644
--- a/dts/Bindings/clock/st/st,clkgen-vcc.txt
+++ b/dts/Bindings/clock/st/st,clkgen-vcc.txt
@@ -32,22 +32,30 @@ Required properties:
 
 Example:
 
-	CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
 		#clock-cells = <1>;
 		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
 		reg = <0xfe8308ac 12>;
 
-		clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
-			<&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
-
-		clock-output-names  =
-			"CLK_S_PIX_HDMI",  "CLK_S_PIX_DVO",
-			"CLK_S_OUT_DVO",   "CLK_S_PIX_HD",
-			"CLK_S_HDDAC",     "CLK_S_DENC",
-			"CLK_S_SDDAC",     "CLK_S_PIX_MAIN",
-			"CLK_S_PIX_AUX",   "CLK_S_STFE_FRC_0",
-			"CLK_S_REF_MCRU",  "CLK_S_SLAVE_MCRU",
-			"CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
-			"CLK_S_THSENS";
+		clocks = <&clk_s_vcc_hd>,
+			 <&clockgen_c 1>,
+			 <&clk_s_tmds_fromphy>,
+			 <&clockgen_c 2>;
+
+		clock-output-names  = "clk-s-pix-hdmi",
+				      "clk-s-pix-dvo",
+				      "clk-s-out-dvo",
+				      "clk-s-pix-hd",
+				      "clk-s-hddac",
+				      "clk-s-denc",
+				      "clk-s-sddac",
+				      "clk-s-pix-main",
+				      "clk-s-pix-aux",
+				      "clk-s-stfe-frc-0",
+				      "clk-s-ref-mcru",
+				      "clk-s-slave-mcru",
+				      "clk-s-tmds-hdmi",
+				      "clk-s-hdmi-reject-pll",
+				      "clk-s-thsens";
 	};
 
diff --git a/dts/Bindings/clock/st/st,clkgen.txt b/dts/Bindings/clock/st/st,clkgen.txt
index 49ec5ae18b..78978f1f51 100644
--- a/dts/Bindings/clock/st/st,clkgen.txt
+++ b/dts/Bindings/clock/st/st,clkgen.txt
@@ -24,60 +24,77 @@ address is common of all subnode.
 		quadfs_node {
 			...
 		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
 		...
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+
 
 Required properties:
 - reg : A Base address and length of the register set.
 
 Example:
 
-	clockgenA@fee62000 {
+	clockgen-a@fee62000 {
 
 		reg = <0xfee62000 0xb48>;
 
-		CLK_S_A0_PLL: CLK_S_A0_PLL {
+		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-plls-c65";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk-sysin>;
 
-			clock-output-names = "CLK_S_A0_PLL0_HS",
-					     "CLK_S_A0_PLL0_LS",
-					     "CLK_S_A0_PLL1";
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
 		};
 
-		CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
+		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
 			#clock-cells = <0>;
 			compatible = "st,clkgena-prediv-c65",
 				     "st,clkgena-prediv";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_S_A0_OSC_PREDIV";
+			clock-output-names = "clk-s-a0-osc-prediv";
 		};
 
-		CLK_S_A0_HS: CLK_S_A0_HS {
+		clk_s_a0_hs: clk-s-a0-hs {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-divmux-c65-hs",
 				     "st,clkgena-divmux";
 
-			clocks = <&CLK_S_A0_OSC_PREDIV>,
-				 <&CLK_S_A0_PLL 0>, /* PLL0 HS */
-				 <&CLK_S_A0_PLL 2>; /* PLL1 */
+			clocks = <&clk-s_a0_osc_prediv>,
+				 <&clk-s_a0_pll 0>, /* pll0 hs */
+				 <&clk-s_a0_pll 2>; /* pll1 */
 
-			clock-output-names = "CLK_S_FDMA_0",
-					     "CLK_S_FDMA_1",
-					     ""; /* CLK_S_JIT_SENSE */
-					     /* Fourth output unused */
+			clock-output-names = "clk-s-fdma-0",
+					     "clk-s-fdma-1",
+					     ""; /* clk-s-jit-sense */
+					     /* fourth output unused */
 		};
 	};
 
diff --git a/dts/Bindings/clock/st/st,flexgen.txt b/dts/Bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000000..1d3ace0881
--- /dev/null
+++ b/dts/Bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,119 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen stucture                              |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};
diff --git a/dts/Bindings/clock/st/st,quadfs.txt b/dts/Bindings/clock/st/st,quadfs.txt
index ec86d62ca2..cedeb9cc82 100644
--- a/dts/Bindings/clock/st/st,quadfs.txt
+++ b/dts/Bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
   "st,stih416-quadfs432",	"st,quadfs"
   "st,stih416-quadfs660-E",	"st,quadfs"
   "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
 
 - #clock-cells : from common clock binding; shall be set to 1.
 
@@ -32,14 +35,14 @@ Required properties:
 
 Example:
 
-	CLOCKGEN_E: CLOCKGEN_E {
+	clockgen_e: clockgen-e@fd3208bc {
                 #clock-cells = <1>;
                 compatible = "st,stih416-quadfs660-E", "st,quadfs";
                 reg = <0xfd3208bc 0xB0>;
 
-                clocks = <&CLK_SYSIN>;
-                clock-output-names = "CLK_M_PIX_MDTP_0",
-                                        "CLK_M_PIX_MDTP_1",
-                                        "CLK_M_PIX_MDTP_2",
-                                        "CLK_M_MPELPC";
+                clocks = <&clk_sysin>;
+                clock-output-names = "clk-m-pix-mdtp-0",
+				     "clk-m-pix-mdtp-1",
+				     "clk-m-pix-mdtp-2",
+				     "clk-m-mpelpc";
         };
diff --git a/dts/Bindings/clock/sunxi.txt b/dts/Bindings/clock/sunxi.txt
index b9ec668bfe..d3a5c3c6d6 100644
--- a/dts/Bindings/clock/sunxi.txt
+++ b/dts/Bindings/clock/sunxi.txt
@@ -9,11 +9,13 @@ Required properties:
 	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
 	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
 	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
 	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
 	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
 	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
 	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
 	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
@@ -23,13 +25,16 @@ Required properties:
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
+	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
 	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
+	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
+	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
 	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
@@ -37,8 +42,10 @@ Required properties:
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
+	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
 	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31