dts: update to v5.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

45 files changed, 1393 insertions, 279 deletions

diff --git a/dts/Bindings/clock/apple,nco.yaml b/dts/Bindings/clock/apple,nco.yaml
new file mode 100644
index 0000000000..74eab5c0d2
--- /dev/null
+++ b/dts/Bindings/clock/apple,nco.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/dts/Bindings/clock/bitmain,bm1880-clk.yaml b/dts/Bindings/clock/bitmain,bm1880-clk.yaml
index 228c9313df..f0f9392470 100644
--- a/dts/Bindings/clock/bitmain,bm1880-clk.yaml
+++ b/dts/Bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...
diff --git a/dts/Bindings/clock/cirrus,cs2000-cp.yaml b/dts/Bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 0000000000..0abd6ba82d
--- /dev/null
+++ b/dts/Bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/dts/Bindings/clock/cs2000-cp.txt b/dts/Bindings/clock/cs2000-cp.txt
deleted file mode 100644
index 54e6df0bee..0000000000
--- a/dts/Bindings/clock/cs2000-cp.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
-
-Required properties:
-
-- compatible:		"cirrus,cs2000-cp"
-- reg:			The chip select number on the I2C bus
-- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
-- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
-- #clock-cells:		must be <0>
-
-Example:
-
-&i2c2 {
-	...
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&rcar_sound 0>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-	};
-};
diff --git a/dts/Bindings/clock/idt,versaclock5.yaml b/dts/Bindings/clock/idt,versaclock5.yaml
index ffd6ae0eed..be66f1e8b5 100644
--- a/dts/Bindings/clock/idt,versaclock5.yaml
+++ b/dts/Bindings/clock/idt,versaclock5.yaml
@@ -191,11 +191,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...
diff --git a/dts/Bindings/clock/imx1-clock.yaml b/dts/Bindings/clock/imx1-clock.yaml
index f4833a29b7..56f524780b 100644
--- a/dts/Bindings/clock/imx1-clock.yaml
+++ b/dts/Bindings/clock/imx1-clock.yaml
@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/dts/Bindings/clock/imx21-clock.yaml b/dts/Bindings/clock/imx21-clock.yaml
index 518ad9a473..e2d5054470 100644
--- a/dts/Bindings/clock/imx21-clock.yaml
+++ b/dts/Bindings/clock/imx21-clock.yaml
@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/dts/Bindings/clock/imx23-clock.yaml b/dts/Bindings/clock/imx23-clock.yaml
index 5e296a00e1..7e890ab9c7 100644
--- a/dts/Bindings/clock/imx23-clock.yaml
+++ b/dts/Bindings/clock/imx23-clock.yaml
@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };
diff --git a/dts/Bindings/clock/imx25-clock.yaml b/dts/Bindings/clock/imx25-clock.yaml
index 2a2b10778e..1792e13898 100644
--- a/dts/Bindings/clock/imx25-clock.yaml
+++ b/dts/Bindings/clock/imx25-clock.yaml
@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };
diff --git a/dts/Bindings/clock/imx27-clock.yaml b/dts/Bindings/clock/imx27-clock.yaml
index 160268f244..99925aa22a 100644
--- a/dts/Bindings/clock/imx27-clock.yaml
+++ b/dts/Bindings/clock/imx27-clock.yaml
@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };
diff --git a/dts/Bindings/clock/imx28-clock.yaml b/dts/Bindings/clock/imx28-clock.yaml
index f831b780f9..a542d680b1 100644
--- a/dts/Bindings/clock/imx28-clock.yaml
+++ b/dts/Bindings/clock/imx28-clock.yaml
@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };
diff --git a/dts/Bindings/clock/imx31-clock.yaml b/dts/Bindings/clock/imx31-clock.yaml
index d2336261c9..168c8ada5e 100644
--- a/dts/Bindings/clock/imx31-clock.yaml
+++ b/dts/Bindings/clock/imx31-clock.yaml
@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };
diff --git a/dts/Bindings/clock/imx35-clock.yaml b/dts/Bindings/clock/imx35-clock.yaml
index 3e20ccaf81..6415bb6a8d 100644
--- a/dts/Bindings/clock/imx35-clock.yaml
+++ b/dts/Bindings/clock/imx35-clock.yaml
@@ -129,11 +129,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    mmc@53fb4000 {
-        compatible = "fsl,imx35-esdhc";
-        reg = <0x53fb4000 0x4000>;
-        interrupts = <7>;
-        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-        clock-names = "ipg", "ahb", "per";
-    };
diff --git a/dts/Bindings/clock/imx7ulp-pcc-clock.yaml b/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
index 7caf5cee91..739c3378f8 100644
--- a/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
@@ -108,14 +108,3 @@ examples:
                        "upll", "sosc_bus_clk", "firc_bus_clk",
                        "rosc", "spll_bus_clk";
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/dts/Bindings/clock/imx7ulp-scg-clock.yaml b/dts/Bindings/clock/imx7ulp-scg-clock.yaml
index ee8efb4ed5..d06344d7e3 100644
--- a/dts/Bindings/clock/imx7ulp-scg-clock.yaml
+++ b/dts/Bindings/clock/imx7ulp-scg-clock.yaml
@@ -86,14 +86,3 @@ examples:
                       "firc", "upll";
         #clock-cells = <1>;
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/dts/Bindings/clock/imx8qxp-lpcg.yaml b/dts/Bindings/clock/imx8qxp-lpcg.yaml
index 0f6fe365eb..cb80105b3c 100644
--- a/dts/Bindings/clock/imx8qxp-lpcg.yaml
+++ b/dts/Bindings/clock/imx8qxp-lpcg.yaml
@@ -101,14 +101,3 @@ examples:
                              "sdhc0_lpcg_ahb_clk";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };
-
-    mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-        reg = <0x5b010000 0x10000>;
-        clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-        clock-names = "ipg", "ahb", "per";
-        power-domains = <&pd IMX_SC_R_SDHC_0>;
-    };
diff --git a/dts/Bindings/clock/imx93-clock.yaml b/dts/Bindings/clock/imx93-clock.yaml
new file mode 100644
index 0000000000..21a06194e4
--- /dev/null
+++ b/dts/Bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module Binding
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/imxrt1050-clock.yaml b/dts/Bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 0000000000..03fc5c1a29
--- /dev/null
+++ b/dts/Bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MXRT
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/intc_stratix10.txt b/dts/Bindings/clock/intc_stratix10.txt
deleted file mode 100644
index 9f4ec5cb5c..0000000000
--- a/dts/Bindings/clock/intc_stratix10.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be
-	"intel,stratix10-clkmgr"
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-
-- #clock-cells : from common clock binding, shall be set to 1.
-
-Example:
-	clkmgr: clock-controller@ffd10000 {
-		compatible = "intel,stratix10-clkmgr";
-		reg = <0xffd10000 0x1000>;
-		#clock-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/intel,stratix10.yaml b/dts/Bindings/clock/intel,stratix10.yaml
new file mode 100644
index 0000000000..f506e3db97
--- /dev/null
+++ b/dts/Bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller binding
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/marvell,armada-3700-uart-clock.yaml b/dts/Bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 0000000000..175f5c8f2b
--- /dev/null
+++ b/dts/Bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/mediatek,mt7621-sysc.yaml b/dts/Bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd7..0c0b0ae5e2 100644
--- a/dts/Bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/dts/Bindings/clock/mediatek,mt7621-sysc.yaml
@@ -22,6 +22,11 @@ description: |
 
   The clocks are provided inside a system controller node.
 
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
 properties:
   compatible:
     items:
@@ -37,6 +42,12 @@ properties:
       clocks.
     const: 1
 
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
   ralink,memctl:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -61,6 +72,7 @@ examples:
       compatible = "mediatek,mt7621-sysc", "syscon";
       reg = <0x0 0x100>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
       ralink,memctl = <&memc>;
       clock-output-names = "xtal", "cpu", "bus",
                            "50m", "125m", "150m",
diff --git a/dts/Bindings/clock/microchip,mpfs.yaml b/dts/Bindings/clock/microchip,mpfs.yaml
new file mode 100644
index 0000000000..0c15afa221
--- /dev/null
+++ b/dts/Bindings/clock/microchip,mpfs.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module Binding
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
+      for the full list of PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/dts/Bindings/clock/mstar,msc313-cpupll.yaml b/dts/Bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 0000000000..a9ad7ab523
--- /dev/null
+++ b/dts/Bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/dts/Bindings/clock/nvidia,tegra124-car.yaml b/dts/Bindings/clock/nvidia,tegra124-car.yaml
index ec7ab14836..1b2181f6d4 100644
--- a/dts/Bindings/clock/nvidia,tegra124-car.yaml
+++ b/dts/Bindings/clock/nvidia,tegra124-car.yaml
@@ -106,10 +106,3 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA124_CLK_USB2>;
-        resets = <&car TEGRA124_CLK_USB2>;
-    };
diff --git a/dts/Bindings/clock/nvidia,tegra20-car.yaml b/dts/Bindings/clock/nvidia,tegra20-car.yaml
index f832abb7f1..bee2dd4b29 100644
--- a/dts/Bindings/clock/nvidia,tegra20-car.yaml
+++ b/dts/Bindings/clock/nvidia,tegra20-car.yaml
@@ -97,10 +97,3 @@ examples:
             power-domains = <&domain>;
         };
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA20_CLK_USB2>;
-        resets = <&car TEGRA20_CLK_USB2>;
-    };
diff --git a/dts/Bindings/clock/qcom,a7pll.yaml b/dts/Bindings/clock/qcom,a7pll.yaml
index 8666e99572..0e96f693b0 100644
--- a/dts/Bindings/clock/qcom,a7pll.yaml
+++ b/dts/Bindings/clock/qcom,a7pll.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description:
-  The A7 PLL on the Qualcomm platforms like SDX55 is used to provide high
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
   frequency clock to the CPU.
 
 properties:
diff --git a/dts/Bindings/clock/qcom,camcc.txt b/dts/Bindings/clock/qcom,camcc.txt
deleted file mode 100644
index c5eb6694fd..0000000000
--- a/dts/Bindings/clock/qcom,camcc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Camera Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-camcc".
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	camcc: clock-controller@ad00000 {
-		compatible = "qcom,sdm845-camcc";
-		reg = <0xad00000 0x10000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/qcom,dispcc-sm6125.yaml b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 0000000000..7a03ef19c9
--- /dev/null
+++ b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller Binding for SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6125.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,dispcc-sm6350.yaml b/dts/Bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 0000000000..e706678b35
--- /dev/null
+++ b/dts/Bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM6350.
+
+  See also dt-bindings/clock/qcom,dispcc-sm6350.h.
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbf..97936411b6 100644
--- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -6,6 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
@@ -17,22 +20,12 @@ description: |
   See also:
   - dt-bindings/clock/qcom,gcc-msm8960.h
   - dt-bindings/reset/qcom,gcc-msm8960.h
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    const: qcom,gcc-apq8084
 
   nvmem-cells:
     minItems: 1
@@ -53,21 +46,13 @@ properties:
   '#thermal-sensor-cells':
     const: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
   - nvmem-cells
   - nvmem-cell-names
   - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/clock/qcom,gcc-ipq8064.yaml b/dts/Bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 0000000000..9eb91dd225
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    items:
+      - description: PXO source
+      - description: CXO source
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/dts/Bindings/clock/qcom,gcc-other.yaml b/dts/Bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 0000000000..6c45e0f854
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq4019.h
+  - dt-bindings/clock/qcom,gcc-ipq6018.h
+  - dt-bindings/reset/qcom,gcc-ipq6018.h
+  - dt-bindings/clock/qcom,gcc-msm8939.h
+  - dt-bindings/clock/qcom,gcc-msm8953.h
+  - dt-bindings/reset/qcom,gcc-msm8939.h
+  - dt-bindings/clock/qcom,gcc-msm8660.h
+  - dt-bindings/reset/qcom,gcc-msm8660.h
+  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/clock/qcom,gcc-mdm9607.h
+  - dt-bindings/clock/qcom,gcc-mdm9615.h
+  - dt-bindings/reset/qcom,gcc-mdm9615.h
+  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq4019
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8660
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+      - qcom,gcc-msm8953
+      - qcom,gcc-msm8960
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+      - qcom,gcc-mdm9615
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8960:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8960";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml
index f66d703bd9..2ed27a2ef4 100644
--- a/dts/Bindings/clock/qcom,gcc.yaml
+++ b/dts/Bindings/clock/qcom,gcc.yaml
@@ -4,57 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/clock/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/clock/qcom,gcc-mdm9607.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  Common bindings for Qualcomm global clock control module which supports
+  the clocks, resets and power domains.
 
 properties:
-  compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
-      - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
-
   '#clock-cells':
     const: 1
 
@@ -72,22 +32,11 @@ properties:
       Protected clock specifier list as per common clock binding.
 
 required:
-  - compatible
   - reg
   - '#clock-cells'
   - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+additionalProperties: true
 
-examples:
-  # Example for GCC for MSM8960:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
-      reg = <0x900000 0x4000>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
 ...
diff --git a/dts/Bindings/clock/qcom,gpucc.yaml b/dts/Bindings/clock/qcom,gpucc.yaml
index 46dff46d57..9ebcb1943b 100644
--- a/dts/Bindings/clock/qcom,gpucc.yaml
+++ b/dts/Bindings/clock/qcom,gpucc.yaml
@@ -17,6 +17,7 @@ description: |
     dt-bindings/clock/qcom,gpucc-sdm845.h
     dt-bindings/clock/qcom,gpucc-sc7180.h
     dt-bindings/clock/qcom,gpucc-sc7280.h
+    dt-bindings/clock/qcom,gpucc-sm6350.h
     dt-bindings/clock/qcom,gpucc-sm8150.h
     dt-bindings/clock/qcom,gpucc-sm8250.h
 
@@ -27,6 +28,7 @@ properties:
       - qcom,sc7180-gpucc
       - qcom,sc7280-gpucc
       - qcom,sc8180x-gpucc
+      - qcom,sm6350-gpucc
       - qcom,sm8150-gpucc
       - qcom,sm8250-gpucc
 
diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml
index 68fdc3d498..4b79e89fd1 100644
--- a/dts/Bindings/clock/qcom,mmcc.yaml
+++ b/dts/Bindings/clock/qcom,mmcc.yaml
@@ -19,6 +19,7 @@ properties:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
       - qcom,mmcc-msm8660
       - qcom,mmcc-msm8960
       - qcom,mmcc-msm8974
diff --git a/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml b/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 0000000000..973e408c62
--- /dev/null
+++ b/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for qcm2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on qcm2290.
+
+  See also dt-bindings/clock/qcom,dispcc-qcm2290.h.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml
index 8406dde179..8fcaf418f8 100644
--- a/dts/Bindings/clock/qcom,rpmhcc.yaml
+++ b/dts/Bindings/clock/qcom,rpmhcc.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,sc7180-rpmh-clk
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
       - qcom,sdx65-rpmh-clk
diff --git a/dts/Bindings/clock/qcom,sdm845-camcc.yaml b/dts/Bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 0000000000..d4239ccae9
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/renesas,9series.yaml b/dts/Bindings/clock/renesas,9series.yaml
new file mode 100644
index 0000000000..102eb95cb3
--- /dev/null
+++ b/dts/Bindings/clock/renesas,9series.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/clock/renesas,cpg-div6-clock.yaml b/dts/Bindings/clock/renesas,cpg-div6-clock.yaml
index c55a7c494e..2197c952e2 100644
--- a/dts/Bindings/clock/renesas,cpg-div6-clock.yaml
+++ b/dts/Bindings/clock/renesas,cpg-div6-clock.yaml
@@ -51,6 +51,18 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
     sdhi2_clk: sdhi2_clk@e615007c {
             compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
             reg = <0xe615007c 4>;
diff --git a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml
index 30b2e3d0d2..bd3af8fc61 100644
--- a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml
@@ -4,13 +4,13 @@
 $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+  On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module
   Standby Mode share the same register block.
 
   They provide the following functionalities:
@@ -22,7 +22,9 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+    enum:
+      - renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg  # RZ/V2L
 
   reg:
     maxItems: 1
@@ -40,9 +42,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g044-cpg.h>
+        <dt-bindings/clock/r9a07g*-cpg.h>
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+        a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -56,7 +58,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g044-cpg.h>.
+      the <dt-bindings/clock/r9a07g0*-cpg.h>.
     const: 1
 
 required:
diff --git a/dts/Bindings/clock/starfive,jh7100-audclk.yaml b/dts/Bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 0000000000..8f49a1ae03
--- /dev/null
+++ b/dts/Bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/tesla,fsd-clock.yaml b/dts/Bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 0000000000..dc808e2f83
--- /dev/null
+++ b/dts/Bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/dts/Bindings/clock/ti/ti,clksel.yaml b/dts/Bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 0000000000..c56f911fff
--- /dev/null
+++ b/dts/Bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...