dts: update to v4.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

41 files changed, 263 insertions, 141 deletions

diff --git a/dts/Bindings/clock/alphascale,acc.txt b/dts/Bindings/clock/alphascale,acc.txt
index 62e67e883e..b3205b21c9 100644
--- a/dts/Bindings/clock/alphascale,acc.txt
+++ b/dts/Bindings/clock/alphascale,acc.txt
@@ -102,7 +102,6 @@ uart4: serial@80010000 {
 	reg = <0x80010000 0x4000>;
 	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
 	interrupts = <19>;
-	status = "disabled";
 };
 
 Clock consumer with only one, _AHB_ sink.
diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
index a55d31b48d..786dc39ca9 100644
--- a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -5,9 +5,11 @@ controllers within the Always-On part of the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-aoclkc"
-- reg: physical base address of the clock controller and length of memory
-       mapped region.
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+	followed by the common "amlogic,meson-gx-aoclkc"
 
 - #clock-cells: should be 1.
 
@@ -23,14 +25,22 @@ to specify the reset which they consume. All available resets are defined as
 preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
 used in device tree sources.
 
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
 Example: AO Clock controller node:
 
-	clkc_AO: clock-controller@040 {
-		compatible = "amlogic,gxbb-aoclkc";
-		reg = <0x0 0x040 0x0 0x4>;
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	clkc_AO: clock-controller {
+		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+};
 
 Example: UART controller node that consumes the clock and reset generated
   by the clock controller:
@@ -41,5 +51,4 @@ Example: UART controller node that consumes the clock and reset generated
 		interrupts = <0 90 1>;
 		clocks = <&clkc_AO CLKID_AO_UART1>;
 		resets = <&clkc_AO RESET_AO_UART1>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.txt b/dts/Bindings/clock/amlogic,gxbb-clkc.txt
index a09d627b55..9240407691 100644
--- a/dts/Bindings/clock/amlogic,gxbb-clkc.txt
+++ b/dts/Bindings/clock/amlogic,gxbb-clkc.txt
@@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		reg = <0xc81004c0 0x14>;
 		interrupts = <0 90 1>;
 		clocks = <&clkc CLKID_CLK81>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/amlogic,meson8b-clkc.txt b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
index 606da38c09..b455c5aa91 100644
--- a/dts/Bindings/clock/amlogic,meson8b-clkc.txt
+++ b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
@@ -16,18 +16,25 @@ Required Properties:
 	   mapped region.
 
 - #clock-cells: should be 1.
+- #reset-cells: should be 1.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
 preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
 used in device tree sources.
 
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
 Example: Clock controller node:
 
 	clkc: clock-controller@c1104000 {
-		#clock-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
 		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 
@@ -39,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		reg = <0xc81004c0 0x14>;
 		interrupts = <0 90 1>;
 		clocks = <&clkc CLKID_CLK81>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/at91-clock.txt b/dts/Bindings/clock/at91-clock.txt
index 5f3ad65daf..51c259a92d 100644
--- a/dts/Bindings/clock/at91-clock.txt
+++ b/dts/Bindings/clock/at91-clock.txt
@@ -81,6 +81,16 @@ Required properties:
 	"atmel,sama5d2-clk-generated":
 		at91 generated clock
 
+	"atmel,sama5d2-clk-audio-pll-frac":
+		at91 audio fractional pll
+
+	"atmel,sama5d2-clk-audio-pll-pad":
+		at91 audio pll CLK_AUDIO output pin
+
+	"atmel,sama5d2-clk-audio-pll-pmc"
+		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
+		and can be used by peripheral clock or generic clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
diff --git a/dts/Bindings/clock/brcm,kona-ccu.txt b/dts/Bindings/clock/brcm,kona-ccu.txt
index 5286e260fc..8e5a7d8685 100644
--- a/dts/Bindings/clock/brcm,kona-ccu.txt
+++ b/dts/Bindings/clock/brcm,kona-ccu.txt
@@ -46,7 +46,6 @@ Device tree example:
 
 	uart@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/clock/exynos5433-clock.txt b/dts/Bindings/clock/exynos5433-clock.txt
index 1dc80f8811..fe885abc9c 100644
--- a/dts/Bindings/clock/exynos5433-clock.txt
+++ b/dts/Bindings/clock/exynos5433-clock.txt
@@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock
 		clock-names = "uart", "clk_uart_baud0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_bus>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/hi3660-clock.txt b/dts/Bindings/clock/hi3660-clock.txt
index cc9b86c357..0035a7ecaf 100644
--- a/dts/Bindings/clock/hi3660-clock.txt
+++ b/dts/Bindings/clock/hi3660-clock.txt
@@ -38,5 +38,4 @@ Examples:
 		clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
 			 <&crg_ctrl HI3660_PCLK>;
 		clock-names = "uartclk", "apb_pclk";
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/hix5hd2-clock.txt b/dts/Bindings/clock/hix5hd2-clock.txt
index 7894a64887..4733e58e49 100644
--- a/dts/Bindings/clock/hix5hd2-clock.txt
+++ b/dts/Bindings/clock/hix5hd2-clock.txt
@@ -27,5 +27,4 @@ Examples:
 		interrupts = <0 49 4>;
 		clocks = <&clock HIX5HD2_FIXED_83M>;
 		clock-names = "apb_pclk";
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/idt,versaclock5.txt b/dts/Bindings/clock/idt,versaclock5.txt
index 53d7e50ed8..05a245c9df 100644
--- a/dts/Bindings/clock/idt,versaclock5.txt
+++ b/dts/Bindings/clock/idt,versaclock5.txt
@@ -1,24 +1,32 @@
-Binding for IDT VersaClock5 programmable i2c clock generator.
+Binding for IDT VersaClock 5,6 programmable i2c clock generators.
 
-The IDT VersaClock5 are programmable i2c clock generators providing
-from 3 to 12 output clocks.
+The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
+generators providing from 3 to 12 output clocks.
 
 ==I2C device node==
 
 Required properties:
-- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
-		"idt,5p49v5935".
+- compatible:	shall be one of
+		"idt,5p49v5923"
+		"idt,5p49v5925"
+		"idt,5p49v5933"
+		"idt,5p49v5935"
+		"idt,5p49v6901"
 - reg:		i2c device address, shall be 0x68 or 0x6a.
 - #clock-cells:	from common clock binding; shall be set to 1.
 - clocks:	from common clock binding; list of parent clock handles,
-		- 5p49v5923: (required) either or both of XTAL or CLKIN
+		- 5p49v5923 and
+		  5p49v5925 and
+		  5p49v6901: (required) either or both of XTAL or CLKIN
 					reference clock.
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present (internal
 					Xtal used) or CLKIN reference
 					clock.
 - clock-names:	from common clock binding; clock input names, can be
-		- 5p49v5923: (required) either or both of "xin", "clkin".
+		- 5p49v5923 and
+		  5p49v5925 and
+		  5p49v6901: (required) either or both of "xin", "clkin".
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present or "clkin".
 
@@ -37,6 +45,7 @@ clock specifier, the following mapping applies:
 	1 -- OUT1
 	2 -- OUT4
 
+5P49V5925 and
 5P49V5935:
 	0 -- OUT0_SEL_I2CB
 	1 -- OUT1
@@ -44,6 +53,13 @@ clock specifier, the following mapping applies:
 	3 -- OUT3
 	4 -- OUT4
 
+5P49V6901:
+	0 -- OUT0_SEL_I2CB
+	1 -- OUT1
+	2 -- OUT2
+	3 -- OUT3
+	4 -- OUT4
+
 ==Example==
 
 /* 25MHz reference crystal */
diff --git a/dts/Bindings/clock/imx21-clock.txt b/dts/Bindings/clock/imx21-clock.txt
index c3b0db437c..806f63d628 100644
--- a/dts/Bindings/clock/imx21-clock.txt
+++ b/dts/Bindings/clock/imx21-clock.txt
@@ -24,5 +24,4 @@ Examples:
 		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
 			 <&clks IMX21_CLK_PER1>;
 		clock-names = "ipg", "per";
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/imx23-clock.txt b/dts/Bindings/clock/imx23-clock.txt
index 5083c0b834..8385348d3b 100644
--- a/dts/Bindings/clock/imx23-clock.txt
+++ b/dts/Bindings/clock/imx23-clock.txt
@@ -67,5 +67,4 @@ auart0: serial@8006c000 {
 	reg = <0x8006c000 0x2000>;
 	interrupts = <24 25 23>;
 	clocks = <&clks 32>;
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/imx25-clock.txt b/dts/Bindings/clock/imx25-clock.txt
index ba6b312ff8..f8135ea9ca 100644
--- a/dts/Bindings/clock/imx25-clock.txt
+++ b/dts/Bindings/clock/imx25-clock.txt
@@ -157,5 +157,4 @@ uart1: serial@43f90000 {
 	interrupts = <45>;
 	clocks = <&clks 79>, <&clks 50>;
 	clock-names = "ipg", "per";
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/imx27-clock.txt b/dts/Bindings/clock/imx27-clock.txt
index cc05de9ec3..4c95c048d3 100644
--- a/dts/Bindings/clock/imx27-clock.txt
+++ b/dts/Bindings/clock/imx27-clock.txt
@@ -24,5 +24,4 @@ Examples:
 		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
 			 <&clks IMX27_CLK_PER1_GATE>;
 		clock-names = "ipg", "per";
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/imx28-clock.txt b/dts/Bindings/clock/imx28-clock.txt
index e6587af62f..d84a37d288 100644
--- a/dts/Bindings/clock/imx28-clock.txt
+++ b/dts/Bindings/clock/imx28-clock.txt
@@ -90,5 +90,4 @@ auart0: serial@8006a000 {
 	reg = <0x8006a000 0x2000>;
 	interrupts = <112 70 71>;
 	clocks = <&clks 45>;
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/imx31-clock.txt b/dts/Bindings/clock/imx31-clock.txt
index 8163d565f6..0a291090e5 100644
--- a/dts/Bindings/clock/imx31-clock.txt
+++ b/dts/Bindings/clock/imx31-clock.txt
@@ -87,5 +87,4 @@ uart1: serial@43f90000 {
 	interrupts = <45>;
 	clocks = <&clks 10>, <&clks 30>;
 	clock-names = "ipg", "per";
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/imx5-clock.txt b/dts/Bindings/clock/imx5-clock.txt
index cadc4d29ad..a24ca9e582 100644
--- a/dts/Bindings/clock/imx5-clock.txt
+++ b/dts/Bindings/clock/imx5-clock.txt
@@ -25,5 +25,4 @@ can1: can@53fc8000 {
 	interrupts = <82>;
 	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 	clock-names = "ipg", "per";
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/imx6q-clock.txt b/dts/Bindings/clock/imx6q-clock.txt
index 9252912a5b..aa0a4d423e 100644
--- a/dts/Bindings/clock/imx6q-clock.txt
+++ b/dts/Bindings/clock/imx6q-clock.txt
@@ -27,5 +27,4 @@ uart1: serial@02020000 {
 	interrupts = <0 26 0x04>;
 	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
 	clock-names = "ipg", "per";
-	status = "disabled";
 };
diff --git a/dts/Bindings/clock/mt8173-cpu-dvfs.txt b/dts/Bindings/clock/mt8173-cpu-dvfs.txt
deleted file mode 100644
index 52b457c23e..0000000000
--- a/dts/Bindings/clock/mt8173-cpu-dvfs.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
-	generic clock consumer properties.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-
-Example:
---------
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
diff --git a/dts/Bindings/clock/nvidia,tegra124-dfll.txt b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
index 63f9d8277d..dff236f524 100644
--- a/dts/Bindings/clock/nvidia,tegra124-dfll.txt
+++ b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
@@ -66,7 +66,6 @@ clock@70110000 {
         #clock-cells = <0>;
         clock-output-names = "dfllCPU_out";
         vdd-cpu-supply = <&vdd_cpu>;
-        status = "okay";
 
         nvidia,sample-rate = <12500>;
         nvidia,droop-ctrl = <0x00000f00>;
diff --git a/dts/Bindings/clock/pxa-clock.txt b/dts/Bindings/clock/pxa-clock.txt
index 4b4a9024bd..8f67239411 100644
--- a/dts/Bindings/clock/pxa-clock.txt
+++ b/dts/Bindings/clock/pxa-clock.txt
@@ -12,5 +12,4 @@ Examples:
 pxa2xx_clks: pxa2xx_clks@41300004 {
         compatible = "marvell,pxa-clocks";
         #clock-cells = <1>;
-        status = "okay";
 };
diff --git a/dts/Bindings/clock/renesas,cpg-mssr.txt b/dts/Bindings/clock/renesas,cpg-mssr.txt
index 0cd894f987..316e136865 100644
--- a/dts/Bindings/clock/renesas,cpg-mssr.txt
+++ b/dts/Bindings/clock/renesas,cpg-mssr.txt
@@ -22,6 +22,7 @@ Required Properties:
       - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
       - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
+      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -30,7 +31,7 @@ Required Properties:
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
-		 r8a7795, r8a7796)
+		 r8a7795, r8a7796, r8a77995)
       - "extalr" (r8a7795, r8a7796)
       - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
 
@@ -81,5 +82,4 @@ Examples
 		dma-names = "tx", "rx";
 		power-domains = <&cpg>;
 		resets = <&cpg 310>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt b/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
index e4cdaf1cb3..7cc4c0330b 100644
--- a/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -44,5 +44,4 @@ Examples
 		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
 		power-domains = <&cpg_clocks>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt
new file mode 100644
index 0000000000..e96e085271
--- /dev/null
+++ b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -0,0 +1,55 @@
+* Renesas R-Car USB 2.0 clock selector
+
+This file provides information on what the device node for the R-Car USB 2.0
+clock selector.
+
+If you connect an external clock to the USB_EXTAL pin only, you should set
+the clock rate to "usb_extal" node only.
+If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+is not needed because this is default setting. (Of course, you can set the
+clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+Case 1: An external clock connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|External  |---|USB_EXTAL ---> all usb channels|
+	|clock     |   |USB_XTAL                       |
+	+----------+   +-------------------------------+
+In this case, we need this driver with "usb_extal" clock.
+
+Case 2: An oscillator connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|Oscillator|---|USB_EXTAL -+-> all usb channels|
+	|          |---|USB_XTAL --+                   |
+	+----------+   +-------------------------------+
+In this case, we don't need this selector.
+
+Required properties:
+- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
+	      an R8A7795 SoC.
+	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
+	      an R8A7796 SoC.
+	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
+	      compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
+- reg: offset and length of the USB 2.0 clock selector register block.
+- clocks: A list of phandles and specifier pairs.
+- clock-names: Name of the clocks.
+ - The functional clock must be "ehci_ohci"
+ - The USB_EXTAL clock pin must be "usb_extal"
+ - The USB_XTAL clock pin must be "usb_xtal"
+- #clock-cells: Must be 0
+
+Example (R-Car H3):
+
+	usb2_clksel: clock-controller@e6590630 {
+		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+			     "renesas,rcar-gen3-usb2-clock-sel";
+		reg = <0 0xe6590630 0 0x02>;
+		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		#clock-cells = <0>;
+	};
diff --git a/dts/Bindings/clock/renesas,rz-cpg-clocks.txt b/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
index bb51a33a1f..bb5d942075 100644
--- a/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/dts/Bindings/clock/renesas,rz-cpg-clocks.txt
@@ -50,5 +50,4 @@ Examples
 		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/rockchip,rk3128-cru.txt b/dts/Bindings/clock/rockchip,rk3128-cru.txt
index 455a9a00a6..6f8744fd30 100644
--- a/dts/Bindings/clock/rockchip,rk3128-cru.txt
+++ b/dts/Bindings/clock/rockchip,rk3128-cru.txt
@@ -1,12 +1,14 @@
-* Rockchip RK3128 Clock and Reset Unit
+* Rockchip RK3126/RK3128 Clock and Reset Unit
 
-The RK3128 clock controller generates and supplies clock to various
+The RK3126/RK3128 clock controller generates and supplies clock to various
 controllers within the SoC and also implements a reset controller for SoC
 peripherals.
 
 Required Properties:
 
-- compatible: should be "rockchip,rk3128-cru"
+- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
+  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
+  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
 - reg: physical base address of the controller and length of memory mapped
   region.
 - #clock-cells: should be 1.
diff --git a/dts/Bindings/clock/samsung,s3c2410-clock.txt b/dts/Bindings/clock/samsung,s3c2410-clock.txt
index 822505e715..2632d3f130 100644
--- a/dts/Bindings/clock/samsung,s3c2410-clock.txt
+++ b/dts/Bindings/clock/samsung,s3c2410-clock.txt
@@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		interrupts = <1 23 3 4>, <1 23 4 4>;
 		clock-names = "uart", "clk_uart_baud2";
 		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/samsung,s3c2412-clock.txt b/dts/Bindings/clock/samsung,s3c2412-clock.txt
index 2b430960ba..21a8c23e65 100644
--- a/dts/Bindings/clock/samsung,s3c2412-clock.txt
+++ b/dts/Bindings/clock/samsung,s3c2412-clock.txt
@@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
 		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
 			 <&clocks SCLK_UART>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/samsung,s3c2443-clock.txt b/dts/Bindings/clock/samsung,s3c2443-clock.txt
index e67bb05478..985c0f574e 100644
--- a/dts/Bindings/clock/samsung,s3c2443-clock.txt
+++ b/dts/Bindings/clock/samsung,s3c2443-clock.txt
@@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock
 				"clk_uart_baud3";
 		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
 				<&clocks SCLK_UART>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/samsung,s3c64xx-clock.txt b/dts/Bindings/clock/samsung,s3c64xx-clock.txt
index fa171dc4bd..872ee8e0f0 100644
--- a/dts/Bindings/clock/samsung,s3c64xx-clock.txt
+++ b/dts/Bindings/clock/samsung,s3c64xx-clock.txt
@@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock
 					"clk_uart_baud3";
 			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
 					<&clock SCLK_UART>;
-			status = "disabled";
 		};
diff --git a/dts/Bindings/clock/samsung,s5pv210-clock.txt b/dts/Bindings/clock/samsung,s5pv210-clock.txt
index effd9401c1..15b48e20a0 100644
--- a/dts/Bindings/clock/samsung,s5pv210-clock.txt
+++ b/dts/Bindings/clock/samsung,s5pv210-clock.txt
@@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock
 				"clk_uart_baud1";
 		clocks = <&clocks UART0>, <&clocks UART0>,
 				<&clocks SCLK_UART0>;
-		status = "disabled";
 	};
diff --git a/dts/Bindings/clock/silabs,si5351.txt b/dts/Bindings/clock/silabs,si5351.txt
index 28b28309f5..a6c4ef343b 100644
--- a/dts/Bindings/clock/silabs,si5351.txt
+++ b/dts/Bindings/clock/silabs,si5351.txt
@@ -12,7 +12,11 @@ generators can be found in [1].
 ==I2C device node==
 
 Required properties:
-- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- compatible: shall be one of the following:
+	"silabs,si5351a" - Si5351a, QFN20 package
+	"silabs,si5351a-msop" - Si5351a, MSOP10 package
+	"silabs,si5351b" - Si5351b, QFN20 package
+	"silabs,si5351c" - Si5351c, QFN20 package
 - reg: i2c device address, shall be 0x60 or 0x61.
 - #clock-cells: from common clock binding; shall be set to 1.
 - clocks: from common clock binding; list of parent clock
diff --git a/dts/Bindings/clock/snps,hsdk-pll-clock.txt b/dts/Bindings/clock/snps,hsdk-pll-clock.txt
new file mode 100644
index 0000000000..c56c7553c7
--- /dev/null
+++ b/dts/Bindings/clock/snps,hsdk-pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};
diff --git a/dts/Bindings/clock/snps,pll-clock.txt b/dts/Bindings/clock/snps,pll-clock.txt
new file mode 100644
index 0000000000..11fe487661
--- /dev/null
+++ b/dts/Bindings/clock/snps,pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+  "snps,axs10x-arc-pll-clock"
+  "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input-clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	core-clk: core-clk@80 {
+		compatible = "snps,axs10x-arc-pll-clock";
+		reg = <0x80 0x10>, <0x100 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input-clk>;
+	};
diff --git a/dts/Bindings/clock/st,stm32h7-rcc.txt b/dts/Bindings/clock/st,stm32h7-rcc.txt
new file mode 100644
index 0000000000..a135504c7d
--- /dev/null
+++ b/dts/Bindings/clock/st,stm32h7-rcc.txt
@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - low speed external clock signal (LSE)
+  - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  write protection (RTC clock).
+
+Example:
+
+	rcc: reset-clock-controller@58024400 {
+		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+		reg = <0x58024400 0x400>;
+		#reset-cells = <1>;
+		#clock-cells = <2>;
+		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+		st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+	timer2 {
+		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
+	};
diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt
index df9fad58fa..7eda08eb8a 100644
--- a/dts/Bindings/clock/sunxi-ccu.txt
+++ b/dts/Bindings/clock/sunxi-ccu.txt
@@ -3,18 +3,24 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,sun4i-a10-ccu"
+		- "allwinner,sun5i-a10s-ccu"
+		- "allwinner,sun5i-a13-ccu"
 		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun7i-a20-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-a83t-ccu"
 		- "allwinner,sun8i-a83t-r-ccu"
 		- "allwinner,sun8i-h3-ccu"
 		- "allwinner,sun8i-h3-r-ccu"
++		- "allwinner,sun8i-r40-ccu"
 		- "allwinner,sun8i-v3s-ccu"
 		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
+		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
diff --git a/dts/Bindings/clock/ti,sci-clk.txt b/dts/Bindings/clock/ti,sci-clk.txt
index 1e884c40ab..4e59dc6b17 100644
--- a/dts/Bindings/clock/ti,sci-clk.txt
+++ b/dts/Bindings/clock/ti,sci-clk.txt
@@ -14,10 +14,9 @@ Required properties:
 - compatible: Must be "ti,k2g-sci-clk"
 - #clock-cells: Shall be 2.
   In clock consumers, this cell represents the device ID and clock ID
-  exposed by the PM firmware. The assignments can be found in the header
-  files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
-  <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
-  is the SoC involved, for example 'k2g'.
+  exposed by the PM firmware. The list of valid values for the device IDs
+  and clocks IDs for 66AK2G SoC are documented at
+  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
 
 Examples:
 --------
diff --git a/dts/Bindings/clock/ti/dra7-atl.txt b/dts/Bindings/clock/ti/dra7-atl.txt
index 585e8c191f..10f7047755 100644
--- a/dts/Bindings/clock/ti/dra7-atl.txt
+++ b/dts/Bindings/clock/ti/dra7-atl.txt
@@ -81,13 +81,11 @@ atl: atl@4843c000 {
 				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
 	clocks = <&atl_gfclk_mux>;
 	clock-names = "fck";
-	status = "disabled";
 };
 
 #include <dt-bindings/clk/ti-dra7-atl.h>
 
 &atl {
-	status = "okay";
 
 	atl2 {
 		bws = <DRA7_ATL_WS_MCASP2_FSX>;
diff --git a/dts/Bindings/clock/uniphier-clock.txt b/dts/Bindings/clock/uniphier-clock.txt
index 812163060f..7b5f602765 100644
--- a/dts/Bindings/clock/uniphier-clock.txt
+++ b/dts/Bindings/clock/uniphier-clock.txt
@@ -6,7 +6,6 @@ System clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-clock" - for sLD8 SoC.
@@ -14,6 +13,7 @@ Required properties:
     "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-clock" - for LD20 SoC.
+    "socionext,uniphier-pxs3-clock" - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
@@ -48,7 +48,6 @@ Media I/O (MIO) clock, SD clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
@@ -56,6 +55,7 @@ Required properties:
     "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
+    "socionext,uniphier-pxs3-sd-clock"  - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
@@ -82,11 +82,9 @@ Provided clocks:
  8: USB2 ch0 host
  9: USB2 ch1 host
 10: USB2 ch2 host
-11: USB2 ch3 host
 12: USB2 ch0 PHY
 13: USB2 ch1 PHY
 14: USB2 ch2 PHY
-15: USB2 ch3 PHY
 
 
 Peripheral clock
@@ -94,7 +92,6 @@ Peripheral clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-peri-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
@@ -102,6 +99,7 @@ Required properties:
     "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
+    "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
diff --git a/dts/Bindings/clock/zx296702-clk.txt b/dts/Bindings/clock/zx296702-clk.txt
index 750442b655..e85ecb510d 100644
--- a/dts/Bindings/clock/zx296702-clk.txt
+++ b/dts/Bindings/clock/zx296702-clk.txt
@@ -31,5 +31,4 @@ uart0: serial@0x09405000 {
         reg = <0x09405000 0x1000>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&lsp1clk ZX296702_UART0_PCLK>;
-        status = "disabled";
 };
diff --git a/dts/Bindings/clock/zx296718-clk.txt b/dts/Bindings/clock/zx296718-clk.txt
index 4ad7038084..3a46bf0b25 100644
--- a/dts/Bindings/clock/zx296718-clk.txt
+++ b/dts/Bindings/clock/zx296718-clk.txt
@@ -34,5 +34,4 @@ usbphy0:usb-phy0 {
 	#phy-cells = <0>;
 	clocks = <&topclk USB20_PHY_CLK>;
 	clock-names = "phyclk";
-	status = "okay";
 };