Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 30 insertions, 0 deletions

diff --git a/dts/Bindings/crypto/omap-des.txt b/dts/Bindings/crypto/omap-des.txt
new file mode 100644
index 0000000000..e8c63bf2e1
--- /dev/null
+++ b/dts/Bindings/crypto/omap-des.txt
@@ -0,0 +1,30 @@
+OMAP SoC DES crypto Module
+
+Required properties:
+
+- compatible : Should contain "ti,omap4-des"
+- ti,hwmods: Name of the hwmod associated with the DES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the DES module
+- clocks : A phandle to the functional clock node of the DES module
+           corresponding to each entry in clock-names
+- clock-names : Name of the functional clock, should be "fck"
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+	Each entry corresponds to an entry in dma-names
+- dma-names: DMA request names should include "tx" and "rx" if present
+
+Example:
+	/* DRA7xx SoC */
+	des: des@480a5000 {
+		compatible = "ti,omap4-des";
+		ti,hwmods = "des";
+		reg = <0x480a5000 0xa0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&sdma 117>, <&sdma 116>;
+		dma-names = "tx", "rx";
+		clocks = <&l3_iclk_div>;
+		clock-names = "fck";
+	};