dts: update to v4.19-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 4 insertions, 10 deletions

diff --git a/dts/Bindings/display/bridge/analogix_dp.txt b/dts/Bindings/display/bridge/analogix_dp.txt
index 0c7473dd0e..027d76c27a 100644
--- a/dts/Bindings/display/bridge/analogix_dp.txt
+++ b/dts/Bindings/display/bridge/analogix_dp.txt
@@ -15,8 +15,6 @@ Required properties for dp-controller:
 		from common clock binding: handle to dp clock.
 	-clock-names:
 		from common clock binding: Shall be "dp".
-	-interrupt-parent:
-		phandle to Interrupt combiner node.
 	-phys:
 		from general PHY binding: the phandle for the PHY device.
 	-phy-names:
diff --git a/dts/Bindings/display/bridge/anx7814.txt b/dts/Bindings/display/bridge/anx7814.txt
index b2a22c28c9..dbd7c84ee5 100644
--- a/dts/Bindings/display/bridge/anx7814.txt
+++ b/dts/Bindings/display/bridge/anx7814.txt
@@ -8,8 +8,6 @@ Required properties:
 
  - compatible		: "analogix,anx7814"
  - reg			: I2C address of the device
- - interrupt-parent	: Should be the phandle of the interrupt controller
-			  that services interrupts for this device
  - interrupts		: Should contain the INTP interrupt
  - hpd-gpios		: Which GPIO to use for hpd
  - pd-gpios		: Which GPIO to use for power down
diff --git a/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
index aacc8b9296..09e0a21f70 100644
--- a/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ b/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -19,8 +19,6 @@ hardware are EDID, HPD, and interrupts.
 stdp4028-ge-b850v3-fw required properties:
   - compatible : "megachips,stdp4028-ge-b850v3-fw"
   - reg : I2C bus address
-  - interrupt-parent : phandle of the interrupt controller that services
-    interrupts to the device
   - interrupts : one interrupt should be described here, as in
     <0 IRQ_TYPE_LEVEL_HIGH>
   - ports : One input port(reg = <0>) and one output port(reg = <1>)
diff --git a/dts/Bindings/display/bridge/sii902x.txt b/dts/Bindings/display/bridge/sii902x.txt
index 56a3e68ccb..72d2dc6c3e 100644
--- a/dts/Bindings/display/bridge/sii902x.txt
+++ b/dts/Bindings/display/bridge/sii902x.txt
@@ -5,8 +5,8 @@ Required properties:
 	- reg: i2c address of the bridge
 
 Optional properties:
-	- interrupts-extended or interrupt-parent + interrupts: describe
-	  the interrupt line used to inform the host about hotplug events.
+	- interrupts: describe the interrupt line used to inform the host 
+	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
 
 Optional subnodes:
diff --git a/dts/Bindings/display/bridge/sii9234.txt b/dts/Bindings/display/bridge/sii9234.txt
index 88041ba23d..a55bf77bd9 100644
--- a/dts/Bindings/display/bridge/sii9234.txt
+++ b/dts/Bindings/display/bridge/sii9234.txt
@@ -7,7 +7,7 @@ Required properties:
 	- iovcc18-supply : I/O Supply Voltage (1.8V)
 	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
 	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- interrupts: interrupt specifier of INT pin
 	- reset-gpios: gpio specifier of RESET pin (active low)
 	- video interfaces: Device node can contain two video interface port
 			    nodes for HDMI encoder and connector according to [1].
diff --git a/dts/Bindings/display/bridge/sil-sii8620.txt b/dts/Bindings/display/bridge/sil-sii8620.txt
index 9409d9c6a2..b05052f7d6 100644
--- a/dts/Bindings/display/bridge/sil-sii8620.txt
+++ b/dts/Bindings/display/bridge/sil-sii8620.txt
@@ -5,7 +5,7 @@ Required properties:
 	- reg: i2c address of the bridge
 	- cvcc10-supply: Digital Core Supply Voltage (1.0V)
 	- iovcc18-supply: I/O Supply Voltage (1.8V)
-	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- interrupts: interrupt specifier of INT pin
 	- reset-gpios: gpio specifier of RESET pin
 	- clocks, clock-names: specification and name of "xtal" clock
 	- video interfaces: Device node can contain video interface port