dts: update to v4.4-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

10 files changed, 616 insertions, 0 deletions

diff --git a/dts/Bindings/display/exynos/exynos-mic.txt b/dts/Bindings/display/exynos/exynos-mic.txt
new file mode 100644
index 0000000000..0fba2ee644
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos-mic.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
+
+MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
+not capable to transfer high resoltuion frame data as decon can send. MIC
+solves this problem by compressing the frame data by 1/2 before it is
+transferred through mipi dsi. The compressed frame data must be uncompressed in
+the panel PCB.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-mic".
+- reg: physical base address and length of the MIC registers set and system
+       register of mic.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
+- samsung,disp-syscon: the reference node for syscon for DISP block.
+- ports: contains a port which is connected to decon node and dsi node.
+	 address-cells and size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the
+	decon node or dsi node. The reg value must be 0 and 1 respectively.
+
+Example:
+SoC specific DT entry:
+mic: mic@13930000 {
+	compatible = "samsung,exynos5433-mic";
+	reg = <0x13930000 0x48>;
+	clocks = <&cmu_disp CLK_PCLK_MIC0>,
+	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+	samsung,disp-syscon = <&syscon_disp>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mic_to_decon: endpoint {
+				remote-endpoint = <&decon_to_mic>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mic_to_dsi: endpoint {
+				remote-endpoint = <&dsi_to_mic>;
+			};
+		};
+	};
+};
diff --git a/dts/Bindings/display/exynos/exynos5433-decon.txt b/dts/Bindings/display/exynos/exynos5433-decon.txt
new file mode 100644
index 0000000000..377afbf512
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos5433-decon.txt
@@ -0,0 +1,65 @@
+Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-decon";
+- reg: physical base address and length of the DECON registers set.
+- interrupts: should contain a list of all DECON IP block interrupts in the
+	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
+	      depends on the interrupt controller used.
+- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
+		   in the same order as they were listed in the interrupts
+		   property.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
+	       "sclk_decon_eclk"
+- ports: contains a port which is connected to mic node. address-cells and
+	 size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the mic
+	node. The reg value muset be 0.
+- i80-if-timings: specify whether the panel which is connected to decon uses
+		  i80 lcd interface or mipi video interface. This node contains
+		  no timing information as that of fimd does. Because there is
+		  no register in decon to specify i80 interface timing value,
+		  it is not needed, but make it remain to use same kind of node
+		  in fimd and exynos7 decon.
+
+Example:
+SoC specific DT entry:
+decon: decon@13800000 {
+	compatible = "samsung,exynos5433-decon";
+	reg = <0x13800000 0x2104>;
+	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_SCLK_DECON_VCLK>,
+		<&cmu_disp CLK_SCLK_DECON_ECLK>;
+	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
+		"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
+	interrupt-names = "vsync", "lcd_sys";
+	interrupts = <0 202 0>, <0 203 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			decon_to_mic: endpoint {
+				remote-endpoint = <&mic_to_decon>;
+			};
+		};
+	};
+};
+
+Board specific DT entry:
+&decon {
+	i80-if-timings {
+	};
+};
diff --git a/dts/Bindings/display/exynos/exynos7-decon.txt b/dts/Bindings/display/exynos/exynos7-decon.txt
new file mode 100644
index 0000000000..3938caacf1
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos7-decon.txt
@@ -0,0 +1,68 @@
+Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos7 series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos7-decon";
+
+- reg: physical base address and length of the DECON registers set.
+
+- interrupt-parent: should be the phandle of the decon controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all DECON IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "pclk_decon0", "aclk_decon0",
+	       "decon0_eclk", "decon0_vclk".
+- i80-if-timings: timing configuration for lcd i80 interface support.
+
+Optional Properties:
+- samsung,power-domain: a phandle to DECON power domain node.
+- display-timings: timing settings for DECON, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
+
+Example:
+
+SoC specific DT entry:
+
+	decon@13930000 {
+		compatible = "samsung,exynos7-decon";
+		interrupt-parent = <&combiner>;
+		reg = <0x13930000 0x1000>;
+		interrupt-names = "lcd_sys", "vsync", "fifo";
+		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
+		clocks = <&clock_disp PCLK_DECON_INT>,
+			 <&clock_disp ACLK_DECON_INT>,
+			 <&clock_disp SCLK_DECON_INT_ECLK>,
+			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
+		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
+				"decon0_vclk";
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	decon@13930000 {
+		pinctrl-0 = <&lcd_clk &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
diff --git a/dts/Bindings/display/exynos/exynos_dp.txt b/dts/Bindings/display/exynos/exynos_dp.txt
new file mode 100644
index 0000000000..64693f2ebc
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_dp.txt
@@ -0,0 +1,120 @@
+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+	-dp-controller node
+	-dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy: deprecated, use phys and phy-names
+	-reg: deprecated
+		Base address of DP PHY register.
+	-samsung,enable-mask: deprecated
+		The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+	-compatible:
+		should be "samsung,exynos5-dp".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
+	-samsung,color-space:
+		input video data format.
+			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
+	-samsung,dynamic-range:
+		dynamic range for input video data.
+			VESA = 0, CEA = 1
+	-samsung,ycbcr-coeff:
+		YCbCr co-efficients for input video.
+			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
+	-samsung,color-depth:
+		number of bits per colour component.
+			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
+	-samsung,link-rate:
+		link rate supported by the panel.
+			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
+	-samsung,lane-count:
+		number of lanes supported by the panel.
+			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+	- display-timings: timings for the connected panel as described by
+		Documentation/devicetree/bindings/display/display-timing.txt
+
+Optional properties for dp-controller:
+	-interlaced:
+		interlace scan mode.
+			Progressive if defined, Interlaced if not defined
+	-vsync-active-high:
+		VSYNC polarity configuration.
+			High if defined, Low if not defined
+	-hsync-active-high:
+		HSYNC polarity configuration.
+			High if defined, Low if not defined
+	-samsung,hpd-gpio:
+		Hotplug detect GPIO.
+			Indicates which GPIO should be used for hotplug
+			detection
+	-video interfaces: Device node can contain video interface port
+			    nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+SOC specific portion:
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
+
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+Board Specific portion:
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+
+		display-timings {
+			native-mode = <&lcd_timing>;
+			lcd_timing: 1366x768 {
+				clock-frequency = <70589280>;
+				hactive = <1366>;
+				vactive = <768>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <32>;
+				vback-porch = <10>;
+				vfront-porch = <12>;
+				vsync-len = <6>;
+			};
+		};
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
diff --git a/dts/Bindings/display/exynos/exynos_dsim.txt b/dts/Bindings/display/exynos/exynos_dsim.txt
new file mode 100644
index 0000000000..0e6f0c0248
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_dsim.txt
@@ -0,0 +1,103 @@
+Exynos MIPI DSI Master
+
+Required properties:
+  - compatible: value should be one of the following
+		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
+		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
+		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
+  - reg: physical base address and length of the registers set for the device
+  - interrupts: should contain DSI interrupt
+  - clocks: list of clock specifiers, must contain an entry for each required
+    entry in clock-names
+  - clock-names: should include "bus_clk"and "sclk_mipi" entries
+		 the use of "pll_clk" is deprecated
+  - phys: list of phy specifiers, must contain an entry for each required
+    entry in phy-names
+  - phy-names: should include "dsim" entry
+  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
+  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
+  - #address-cells, #size-cells: should be set respectively to <1> and <0>
+    according to DSI host bindings (see MIPI DSI bindings [1])
+
+Optional properties:
+  - power-domains: a phandle to DSIM power domain node
+
+Child nodes:
+  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
+
+Video interfaces:
+  Device node can contain video interface port nodes according to [2].
+  The following are properties specific to those nodes:
+
+  port node inbound:
+    - reg: (required) must be 0.
+  port node outbound:
+    - reg: (required) must be 1.
+
+  endpoint node connected from mic node (reg = 0):
+    - remote-endpoint: specifies the endpoint in mic node. This node is required
+		       for Exynos5433 mipi dsi. So mic can access to panel node
+		       thoughout this dsi node.
+  endpoint node connected to panel node (reg = 1):
+    - remote-endpoint: specifies the endpoint in panel node. This node is
+		       required in all kinds of exynos mipi dsi to represent
+		       the connection between mipi dsi and panel.
+    - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
+      mode
+    - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
+
+[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		clocks = <&clock 286>, <&clock 143>;
+		clock-names = "bus_clk", "sclk_mipi";
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		power-domains = <&pd_lcd0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,pll-clock-frequency = <24000000>;
+
+		panel@1 {
+			reg = <0>;
+			...
+			port {
+				panel_ep: endpoint {
+					remote-endpoint = <&dsi_ep>;
+				};
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				decon_to_mic: endpoint {
+					remote-endpoint = <&mic_to_decon>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dsi_ep: endpoint {
+					reg = <0>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+					remote-endpoint = <&panel_ep>;
+				};
+			};
+		};
+	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt
new file mode 100644
index 0000000000..1fd8cf9cbf
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_hdmi.txt
@@ -0,0 +1,43 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be one among the following:
+	1) "samsung,exynos5-hdmi" <DEPRECATED>
+	2) "samsung,exynos4210-hdmi"
+	3) "samsung,exynos4212-hdmi"
+	4) "samsung,exynos5420-hdmi"
+- reg: physical base address of the hdmi and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+	a) phandle of the gpio controller node.
+	b) pin number within the gpio controller.
+	c) optional flags and pull up/down.
+- clocks: list of clock IDs from SoC clock driver.
+	a) hdmi: Gate of HDMI IP bus clock.
+	b) sclk_hdmi: Gate of HDMI special clock.
+	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
+		HDMI clock mux.
+	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
+		HDMI clock mux.
+	e) mout_hdmi: It is required by the driver to switch between the 2
+		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+		after configuration, parent is set to sclk_hdmiphy else
+		sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Example:
+
+	hdmi {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+		hpd-gpio = <&gpx3 7 1>;
+		ddc = <&hdmi_ddc_node>;
+		phy = <&hdmi_phy_node>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmiddc.txt b/dts/Bindings/display/exynos/exynos_hdmiddc.txt
new file mode 100644
index 0000000000..41eee97156
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_hdmiddc.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be one of the following
+	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiddc"
+
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+	hdmiddc {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmiphy.txt b/dts/Bindings/display/exynos/exynos_hdmiphy.txt
new file mode 100644
index 0000000000..162f641f76
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_hdmiphy.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiphy".
+	3) "samsung,exynos4212-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+	hdmiphy {
+		compatible = "samsung,exynos4210-hdmiphy";
+		reg = <0x38>;
+	};
diff --git a/dts/Bindings/display/exynos/exynos_mixer.txt b/dts/Bindings/display/exynos/exynos_mixer.txt
new file mode 100644
index 0000000000..3e38128f86
--- /dev/null
+++ b/dts/Bindings/display/exynos/exynos_mixer.txt
@@ -0,0 +1,26 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-mixer" <DEPRECATED>
+	2) "samsung,exynos4210-mixer"
+	3) "samsung,exynos4212-mixer"
+	4) "samsung,exynos5250-mixer"
+	5) "samsung,exynos5420-mixer"
+
+- reg: physical base address of the mixer and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+	a) mixer: Gate of Mixer IP bus clock.
+	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
+               mixer mux.
+	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+
+Example:
+
+	mixer {
+		compatible = "samsung,exynos5250-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};
diff --git a/dts/Bindings/display/exynos/samsung-fimd.txt b/dts/Bindings/display/exynos/samsung-fimd.txt
new file mode 100644
index 0000000000..27c3ce0db1
--- /dev/null
+++ b/dts/Bindings/display/exynos/samsung-fimd.txt
@@ -0,0 +1,110 @@
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
+		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
+		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- power-domains: a phandle to FIMD power domain node.
+- samsung,invert-vden: video enable signal is inverted
+- samsung,invert-vclk: video clock signal is inverted
+- display-timings: timing settings for FIMD, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+- samsung,sysreg: handle to syscon used to control the system registers
+- i80-if-timings: timing configuration for lcd i80 interface support.
+  - cs-setup: clock cycles for the active period of address signal is enabled
+              until chip select is enabled.
+              If not specified, the default value(0) will be used.
+  - wr-setup: clock cycles for the active period of CS signal is enabled until
+              write signal is enabled.
+              If not specified, the default value(0) will be used.
+  - wr-active: clock cycles for the active period of CS is enabled.
+               If not specified, the default value(1) will be used.
+  - wr-hold: clock cycles for the active period of CS is disabled until write
+             signal is disabled.
+             If not specified, the default value(0) will be used.
+
+  The parameters are defined as:
+
+    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                      :            :            :            :            :
+    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                      | cs-setup+1 |            :            :            :
+                      |<---------->|            :            :            :
+    Chip Select     ???????????????|____________:____________:____________|??
+                                   | wr-setup+1 |            | wr-hold+1  |
+                                   |<---------->|            |<---------->|
+    Write Enable    ????????????????????????????|____________|???????????????
+                                                | wr-active+1|
+                                                |<---------->|
+    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+The device node can contain 'port' child nodes according to the bindings defined
+in [2]. The following are properties specific to those nodes:
+- reg: (required) port index, can be:
+		0 - for CAMIF0 input,
+		1 - for CAMIF1 input,
+		2 - for CAMIF2 input,
+		3 - for parallel output,
+		4 - for write-back interface
+
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+SoC specific DT entry:
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		power-domains = <&pd_lcd0>;
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};