dts: update to v5.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

8 files changed, 0 insertions, 403 deletions

diff --git a/dts/Bindings/display/exynos/exynos-mic.txt b/dts/Bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee644..0000000000
--- a/dts/Bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/display/exynos/exynos5433-decon.txt b/dts/Bindings/display/exynos/exynos5433-decon.txt
deleted file mode 100644
index 775193e1c6..0000000000
--- a/dts/Bindings/display/exynos/exynos5433-decon.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of:
-	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
-- reg: physical base address and length of the DECON registers set.
-- interrupt-names: should contain the interrupt names depending on mode of work:
-		video mode: "vsync",
-		command mode: "lcd_sys",
-		command mode with software trigger: "lcd_sys", "te".
-- interrupts or interrupts-extended: list of interrupt specifiers corresponding
-		to names privided in interrupt-names, as described in
-		interrupt-controller/interrupts.txt
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
-	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
-		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/display/exynos/exynos7-decon.txt b/dts/Bindings/display/exynos/exynos7-decon.txt
deleted file mode 100644
index 53912c99ec..0000000000
--- a/dts/Bindings/display/exynos/exynos7-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos7 series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos7-decon";
-
-- reg: physical base address and length of the DECON registers set.
-
-- interrupts: should contain a list of all DECON IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "pclk_decon0", "aclk_decon0",
-	       "decon0_eclk", "decon0_vclk".
-- i80-if-timings: timing configuration for lcd i80 interface support.
-
-Optional Properties:
-- power-domains: a phandle to DECON power domain node.
-- display-timings: timing settings for DECON, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-Example:
-
-SoC specific DT entry:
-
-	decon@13930000 {
-		compatible = "samsung,exynos7-decon";
-		interrupt-parent = <&combiner>;
-		reg = <0x13930000 0x1000>;
-		interrupt-names = "lcd_sys", "vsync", "fifo";
-		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
-		clocks = <&clock_disp PCLK_DECON_INT>,
-			 <&clock_disp ACLK_DECON_INT>,
-			 <&clock_disp SCLK_DECON_INT_ECLK>,
-			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
-		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
-				"decon0_vclk";
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	decon@13930000 {
-		pinctrl-0 = <&lcd_clk &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt
deleted file mode 100644
index 58b12e25bb..0000000000
--- a/dts/Bindings/display/exynos/exynos_hdmi.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be one among the following:
-	1) "samsung,exynos4210-hdmi"
-	2) "samsung,exynos4212-hdmi"
-	3) "samsung,exynos5420-hdmi"
-	4) "samsung,exynos5433-hdmi"
-- reg: physical base address of the hdmi and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpios: following information about the hotplug gpio pin.
-	a) phandle of the gpio controller node.
-	b) pin number within the gpio controller.
-	c) optional flags and pull up/down.
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
-- #sound-dai-cells: should be 0.
-
-Required properties for Exynos 4210, 4212, 5420 and 5433:
-- clocks: list of clock IDs from SoC clock driver.
-	a) hdmi: Gate of HDMI IP bus clock.
-	b) sclk_hdmi: Gate of HDMI special clock.
-	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
-		HDMI clock mux.
-	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
-		HDMI clock mux.
-	e) mout_hdmi: It is required by the driver to switch between the 2
-		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
-		after configuration, parent is set to sclk_hdmiphy else
-		sclk_pixel.
-- clock-names: aliases as per driver requirements for above clock IDs:
-	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-
-Required properties for Exynos 5433:
-- clocks: list of clock specifiers according to common clock bindings.
-	a) hdmi_pclk: Gate of HDMI IP APB bus.
-	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
-	d) i_tmds_clk: Gate of HDMI TMDS clock.
-	e) i_pixel_clk: Gate of HDMI pixel clock.
-	f) i_spdif_clk: Gate of HDMI SPDIF clock.
-	g) oscclk: Oscillator clock, used as parent of following *_user clocks
-		in case HDMI-PHY is not operational.
-	h) tmds_clko: TMDS clock generated by HDMI-PHY.
-	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
-		respectively if HDMI-PHY is off and operational.
-	j) pixel_clko: Pixel clock generated by HDMI-PHY.
-	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
-		respectively if HDMI-PHY is off and operational.
-- clock-names: aliases for above clock specfiers.
-- samsung,sysreg: handle to syscon used to control the system registers.
-
-Example:
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x100000>;
-		interrupts = <0 95 0>;
-		hpd-gpios = <&gpx3 7 1>;
-		ddc = <&hdmi_ddc_node>;
-		phy = <&hdmi_phy_node>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmiddc.txt b/dts/Bindings/display/exynos/exynos_hdmiddc.txt
deleted file mode 100644
index 41eee97156..0000000000
--- a/dts/Bindings/display/exynos/exynos_hdmiddc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be one of the following
-	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiddc"
-
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
-	hdmiddc {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
diff --git a/dts/Bindings/display/exynos/exynos_hdmiphy.txt b/dts/Bindings/display/exynos/exynos_hdmiphy.txt
deleted file mode 100644
index 162f641f76..0000000000
--- a/dts/Bindings/display/exynos/exynos_hdmiphy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiphy".
-	3) "samsung,exynos4212-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
-	hdmiphy {
-		compatible = "samsung,exynos4210-hdmiphy";
-		reg = <0x38>;
-	};
diff --git a/dts/Bindings/display/exynos/exynos_mixer.txt b/dts/Bindings/display/exynos/exynos_mixer.txt
deleted file mode 100644
index 3e38128f86..0000000000
--- a/dts/Bindings/display/exynos/exynos_mixer.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-mixer" <DEPRECATED>
-	2) "samsung,exynos4210-mixer"
-	3) "samsung,exynos4212-mixer"
-	4) "samsung,exynos5250-mixer"
-	5) "samsung,exynos5420-mixer"
-
-- reg: physical base address of the mixer and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- clocks: list of clock IDs from SoC clock driver.
-	a) mixer: Gate of Mixer IP bus clock.
-	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
-               mixer mux.
-	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
-
-Example:
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-	};
diff --git a/dts/Bindings/display/exynos/samsung-fimd.txt b/dts/Bindings/display/exynos/samsung-fimd.txt
deleted file mode 100644
index b3096421d4..0000000000
--- a/dts/Bindings/display/exynos/samsung-fimd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Device-Tree bindings for Samsung SoC display controller (FIMD)
-
-FIMD (Fully Interactive Mobile Display) is the Display Controller for the
-Samsung series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
-		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
-		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
-		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
-		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
-
-- reg: physical base address and length of the FIMD registers set.
-
-- interrupts: should contain a list of all FIMD IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "sclk_fimd" and "fimd".
-
-Optional Properties:
-- power-domains: a phandle to FIMD power domain node.
-- samsung,invert-vden: video enable signal is inverted
-- samsung,invert-vclk: video clock signal is inverted
-- display-timings: timing settings for FIMD, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-- samsung,sysreg: handle to syscon used to control the system registers
-- i80-if-timings: timing configuration for lcd i80 interface support.
-  - cs-setup: clock cycles for the active period of address signal is enabled
-              until chip select is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-setup: clock cycles for the active period of CS signal is enabled until
-              write signal is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-active: clock cycles for the active period of CS is enabled.
-               If not specified, the default value(1) will be used.
-  - wr-hold: clock cycles for the active period of CS is disabled until write
-             signal is disabled.
-             If not specified, the default value(0) will be used.
-
-  The parameters are defined as:
-
-    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
-                      :            :            :            :            :
-    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
-                      | cs-setup+1 |            :            :            :
-                      |<---------->|            :            :            :
-    Chip Select     ???????????????|____________:____________:____________|??
-                                   | wr-setup+1 |            | wr-hold+1  |
-                                   |<---------->|            |<---------->|
-    Write Enable    ????????????????????????????|____________|???????????????
-                                                | wr-active+1|
-                                                |<---------->|
-    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
-
-The device node can contain 'port' child nodes according to the bindings defined
-in [2]. The following are properties specific to those nodes:
-- reg: (required) port index, can be:
-		0 - for CAMIF0 input,
-		1 - for CAMIF1 input,
-		2 - for CAMIF2 input,
-		3 - for parallel output,
-		4 - for write-back interface
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SoC specific DT entry:
-
-	fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};