dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

33 files changed, 357 insertions, 134 deletions

diff --git a/dts/Bindings/display/arm,pl11x.txt b/dts/Bindings/display/arm,pl11x.txt
index 3e3039a8a2..ef89ab46b2 100644
--- a/dts/Bindings/display/arm,pl11x.txt
+++ b/dts/Bindings/display/arm,pl11x.txt
@@ -22,7 +22,7 @@ Required properties:
 
 - clocks: contains phandle and clock specifier pairs for the entries
 	in the clock-names property. See
-	Documentation/devicetree/binding/clock/clock-bindings.txt
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Optional properties:
 
diff --git a/dts/Bindings/display/brcm,bcm-vc4.txt b/dts/Bindings/display/brcm,bcm-vc4.txt
index e2768703ac..34c7fddcea 100644
--- a/dts/Bindings/display/brcm,bcm-vc4.txt
+++ b/dts/Bindings/display/brcm,bcm-vc4.txt
@@ -56,6 +56,18 @@ Required properties for V3D:
 - interrupts:	The interrupt number
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
+Required properties for DSI:
+- compatible:	Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1"
+- reg:		Physical base address and length of the DSI block's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+- clocks:	a) phy: The DSI PLL clock feeding the DSI analog PHY
+		b) escape: The DSI ESC clock from CPRMAN
+		c) pixel: The DSI pixel clock from CPRMAN
+- clock-output-names:
+		The 3 clocks output from the DSI analog PHY: dsi[01]_byte,
+		dsi[01]_ddr2, and dsi[01]_ddr
+
 [1] Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
@@ -99,6 +111,29 @@ dpi: dpi@7e208000 {
 	};
 };
 
+dsi1: dsi@7e700000 {
+	compatible = "brcm,bcm2835-dsi1";
+	reg = <0x7e700000 0x8c>;
+	interrupts = <2 12>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	#clock-cells = <1>;
+
+	clocks = <&clocks BCM2835_PLLD_DSI1>,
+		 <&clocks BCM2835_CLOCK_DSI1E>,
+		 <&clocks BCM2835_CLOCK_DSI1P>;
+	clock-names = "phy", "escape", "pixel";
+
+	clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+
+	pitouchscreen: panel@0 {
+		compatible = "raspberrypi,touchscreen";
+		reg = <0>;
+
+		<...>
+	};
+};
+
 vec: vec@7e806000 {
 	compatible = "brcm,bcm2835-vec";
 	reg = <0x7e806000 0x1000>;
diff --git a/dts/Bindings/display/bridge/adi,adv7511.txt b/dts/Bindings/display/bridge/adi,adv7511.txt
index 6532a59c9b..00ea670b8c 100644
--- a/dts/Bindings/display/bridge/adi,adv7511.txt
+++ b/dts/Bindings/display/bridge/adi,adv7511.txt
@@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and
 - adi,input-justification: The input bit justification ("left", "evenly",
   "right").
 
+- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip.
+- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip.
+- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip.
+- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V
+  on the chip.
+- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
+  needed only for ADV7511.
+
 The following properties are required for ADV7533:
 
 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
   be one of 1, 2, 3 or 4.
+- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
+- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
+- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
+  either 1.2V or 1.8V.
 
 Optional properties:
 
diff --git a/dts/Bindings/display/bridge/analogix_dp.txt b/dts/Bindings/display/bridge/analogix_dp.txt
index 4a0f4f7682..0c7473dd0e 100644
--- a/dts/Bindings/display/bridge/analogix_dp.txt
+++ b/dts/Bindings/display/bridge/analogix_dp.txt
@@ -33,7 +33,7 @@ Optional properties for dp-controller:
 		in Documentation/devicetree/bindings/media/video-interfaces.txt,
 		please refer to the SoC specific binding document:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
diff --git a/dts/Bindings/display/bridge/anx7814.txt b/dts/Bindings/display/bridge/anx7814.txt
new file mode 100644
index 0000000000..b2a22c28c9
--- /dev/null
+++ b/dts/Bindings/display/bridge/anx7814.txt
@@ -0,0 +1,40 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible		: "analogix,anx7814"
+ - reg			: I2C address of the device
+ - interrupt-parent	: Should be the phandle of the interrupt controller
+			  that services interrupts for this device
+ - interrupts		: Should contain the INTP interrupt
+ - hpd-gpios		: Which GPIO to use for hpd
+ - pd-gpios		: Which GPIO to use for power down
+ - reset-gpios		: Which GPIO to use for reset
+
+Optional properties:
+
+ - dvdd10-supply	: Regulator for 1.0V digital core power.
+ - Video port for HDMI input, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	anx7814: anx7814@38 {
+		compatible = "analogix,anx7814";
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+		hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+		pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		port {
+			anx7814_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
diff --git a/dts/Bindings/display/bridge/dw_hdmi.txt b/dts/Bindings/display/bridge/dw_hdmi.txt
index 5e9a84d6e5..33bf981fbe 100644
--- a/dts/Bindings/display/bridge/dw_hdmi.txt
+++ b/dts/Bindings/display/bridge/dw_hdmi.txt
@@ -1,52 +1,33 @@
-DesignWare HDMI bridge bindings
-
-Required properties:
-- compatible: platform specific such as:
-   * "snps,dw-hdmi-tx"
-   * "fsl,imx6q-hdmi"
-   * "fsl,imx6dl-hdmi"
-   * "rockchip,rk3288-dw-hdmi"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The HDMI interrupt number
-- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
-  as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
-  the clocks are soc specific, the clock-names should be "iahb", "isfr"
--port@[X]: SoC specific port nodes with endpoint definitions as defined
-   in Documentation/devicetree/bindings/media/video-interfaces.txt,
-   please refer to the SoC specific binding document:
-    * Documentation/devicetree/bindings/display/imx/hdmi.txt
-    * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
-
-Optional properties
-- reg-io-width: the width of the reg:1,4, default set to 1 if not present
-- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing,
-  if the property is omitted, a functionally reduced I2C bus
-  controller on DW HDMI is probed
-- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
-
-Example:
-	hdmi: hdmi@0120000 {
-		compatible = "fsl,imx6q-hdmi";
-		reg = <0x00120000 0x9000>;
-		interrupts = <0 115 0x04>;
-		gpr = <&gpr>;
-		clocks = <&clks 123>, <&clks 124>;
-		clock-names = "iahb", "isfr";
-		ddc-i2c-bus = <&i2c2>;
-
-		port@0 {
-			reg = <0>;
-
-			hdmi_mux_0: endpoint {
-				remote-endpoint = <&ipu1_di0_hdmi>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			hdmi_mux_1: endpoint {
-				remote-endpoint = <&ipu1_di1_hdmi>;
-			};
-		};
-	};
+Synopsys DesignWare HDMI TX Encoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding
+specification by itself but is meant to be referenced by platform-specific
+device tree bindings.
+
+When referenced from platform device tree bindings the properties defined in
+this document are defined as follows. The platform device tree bindings are
+responsible for defining whether each property is required or optional.
+
+- reg: Memory mapped base address and length of the DWC HDMI TX registers.
+
+- reg-io-width: Width of the registers specified by the reg property. The
+  value is expressed in bytes and must be equal to 1 or 4 if specified. The
+  register width defaults to 1 if the property is not present.
+
+- interrupts: Reference to the DWC HDMI TX interrupt.
+
+- clocks: References to all the clocks specified in the clock-names property
+  as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+- clock-names: The DWC HDMI TX uses the following clocks.
+
+  - "iahb" is the bus clock for either AHB and APB (mandatory).
+  - "isfr" is the internal register configuration clock (mandatory).
+  - "cec" is the HDMI CEC controller main clock (optional).
+
+- ports: The connectivity of the DWC HDMI TX with the rest of the system is
+  expressed in using ports as specified in the device graph bindings defined
+  in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
+  is platform-specific.
diff --git a/dts/Bindings/display/bridge/sil-sii8620.txt b/dts/Bindings/display/bridge/sil-sii8620.txt
new file mode 100644
index 0000000000..9409d9c6a2
--- /dev/null
+++ b/dts/Bindings/display/bridge/sil-sii8620.txt
@@ -0,0 +1,33 @@
+Silicon Image SiI8620 HDMI/MHL bridge bindings
+
+Required properties:
+	- compatible: "sil,sii8620"
+	- reg: i2c address of the bridge
+	- cvcc10-supply: Digital Core Supply Voltage (1.0V)
+	- iovcc18-supply: I/O Supply Voltage (1.8V)
+	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- reset-gpios: gpio specifier of RESET pin
+	- clocks, clock-names: specification and name of "xtal" clock
+	- video interfaces: Device node can contain video interface port
+			    node for HDMI encoder according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	sii8620@39 {
+		reg = <0x39>;
+		compatible = "sil,sii8620";
+		cvcc10-supply = <&ldo36_reg>;
+		iovcc18-supply = <&ldo34_reg>;
+		interrupt-parent = <&gpf0>;
+		interrupts = <2 0>;
+		reset-gpio = <&gpv7 0 0>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "xtal";
+
+		port {
+			mhl_to_hdmi: endpoint {
+				remote-endpoint = <&hdmi_to_mhl>;
+			};
+		};
+	};
diff --git a/dts/Bindings/display/bridge/ti,ths8135.txt b/dts/Bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000000..6ec1a880ac
--- /dev/null
+++ b/dts/Bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,46 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vga_bridge_in: endpoint {
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			vga_bridge_out: endpoint {
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/dts/Bindings/display/cirrus,clps711x-fb.txt b/dts/Bindings/display/cirrus,clps711x-fb.txt
index e9c65746e2..b0e5066104 100644
--- a/dts/Bindings/display/cirrus,clps711x-fb.txt
+++ b/dts/Bindings/display/cirrus,clps711x-fb.txt
@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/display/display-timing.txt.
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required
diff --git a/dts/Bindings/display/exynos/exynos7-decon.txt b/dts/Bindings/display/exynos/exynos7-decon.txt
index 3938caacf1..9e2e7f6f76 100644
--- a/dts/Bindings/display/exynos/exynos7-decon.txt
+++ b/dts/Bindings/display/exynos/exynos7-decon.txt
@@ -33,12 +33,12 @@ Required properties:
 - i80-if-timings: timing configuration for lcd i80 interface support.
 
 Optional Properties:
-- samsung,power-domain: a phandle to DECON power domain node.
+- power-domains: a phandle to DECON power domain node.
 - display-timings: timing settings for DECON, as described in document [1].
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 Example:
 
diff --git a/dts/Bindings/display/exynos/samsung-fimd.txt b/dts/Bindings/display/exynos/samsung-fimd.txt
index c7c6b9af87..18645e0228 100644
--- a/dts/Bindings/display/exynos/samsung-fimd.txt
+++ b/dts/Bindings/display/exynos/samsung-fimd.txt
@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
diff --git a/dts/Bindings/display/hisilicon/hisi-ade.txt b/dts/Bindings/display/hisilicon/hisi-ade.txt
index 38dc9d60ee..305a0e72a9 100644
--- a/dts/Bindings/display/hisilicon/hisi-ade.txt
+++ b/dts/Bindings/display/hisilicon/hisi-ade.txt
@@ -16,7 +16,7 @@ Required properties:
   "clk_ade_core" for the ADE core clock.
   "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
   jpeg codec.
-  "clk_ade_pix" for the ADE pixel clok.
+  "clk_ade_pix" for the ADE pixel clock.
 - assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
   phandle + clock-specifier pairs.
 - assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
diff --git a/dts/Bindings/display/imx/fsl,imx-fb.txt b/dts/Bindings/display/imx/fsl,imx-fb.txt
index 00d5f8ea7e..7a5c0e204c 100644
--- a/dts/Bindings/display/imx/fsl,imx-fb.txt
+++ b/dts/Bindings/display/imx/fsl,imx-fb.txt
@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/display-timing.txt
+	Documentation/devicetree/bindings/display/panel/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value
diff --git a/dts/Bindings/display/imx/hdmi.txt b/dts/Bindings/display/imx/hdmi.txt
index 1b756cf9af..66a8f86e5d 100644
--- a/dts/Bindings/display/imx/hdmi.txt
+++ b/dts/Bindings/display/imx/hdmi.txt
@@ -1,29 +1,36 @@
-Device-Tree bindings for HDMI Transmitter
+Freescale i.MX6 DWC HDMI TX Encoder
+===================================
 
-HDMI Transmitter
-================
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with a companion PHY IP.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
 
-The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with accompanying PHY IP.
 
 Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
- - gpr : should be <&gpr>.
-   The phandle points to the iomuxc-gpr region containing the HDMI
-   multiplexer control register.
- - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
-   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-   Documentation/devicetree/bindings/clock/imx6q-clock.txt.
- - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
-   Documentation/devicetree/bindings/media/video-interfaces.txt,
-   corresponding to the four inputs to the HDMI multiplexer.
-
-Optional properties:
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-
-example:
+
+- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+- reg: See dw_hdmi.txt.
+- interrupts: HDMI interrupt number
+- clocks: See dw_hdmi.txt.
+- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
+- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports,
+  numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer.
+  Each port shall have a single endpoint.
+- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI
+  multiplexer control register.
+
+Optional properties
+
+- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
+  or the functionally-reduced I2C master contained in the DWC HDMI. When
+  connected to a system I2C master this property contains a phandle to that
+  I2C master controller.
+
+
+Example:
 
 	gpr: iomuxc-gpr@020e0000 {
 		/* ... */
diff --git a/dts/Bindings/display/imx/ldb.txt b/dts/Bindings/display/imx/ldb.txt
index a407462c88..38c637fa39 100644
--- a/dts/Bindings/display/imx/ldb.txt
+++ b/dts/Bindings/display/imx/ldb.txt
@@ -64,7 +64,7 @@ Required properties:
 Optional properties (required if display-timings are used):
  - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/display-timing.txt.
+   Documentation/devicetree/bindings/display/panel/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.
diff --git a/dts/Bindings/display/mediatek/mediatek,disp.txt b/dts/Bindings/display/mediatek/mediatek,disp.txt
index db6e77edbe..708f5664a3 100644
--- a/dts/Bindings/display/mediatek/mediatek,disp.txt
+++ b/dts/Bindings/display/mediatek/mediatek,disp.txt
@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
 - larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
diff --git a/dts/Bindings/display/msm/dsi.txt b/dts/Bindings/display/msm/dsi.txt
index 6b1cab17f5..fa00e62e1c 100644
--- a/dts/Bindings/display/msm/dsi.txt
+++ b/dts/Bindings/display/msm/dsi.txt
@@ -108,7 +108,7 @@ Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
   regulator is wanted.
 
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/graph.txt
 [3] Documentation/devicetree/bindings/media/video-interfaces.txt
 [4] Documentation/devicetree/bindings/display/panel/
diff --git a/dts/Bindings/display/msm/edp.txt b/dts/Bindings/display/msm/edp.txt
index 3a20f6ea58..e63032be54 100644
--- a/dts/Bindings/display/msm/edp.txt
+++ b/dts/Bindings/display/msm/edp.txt
@@ -10,7 +10,7 @@ Required properties:
 - interrupts: The interrupt signal from the eDP block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
   * "core_clk"
   * "iface_clk"
diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt
index 67d0a58dbb..43fac0fe09 100644
--- a/dts/Bindings/display/msm/gpu.txt
+++ b/dts/Bindings/display/msm/gpu.txt
@@ -1,23 +1,19 @@
 Qualcomm adreno/snapdragon GPU
 
 Required properties:
-- compatible: "qcom,adreno-3xx"
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno"
+    for example: "qcom,adreno-306.0", "qcom,adreno"
+  Note that you need to list the less specific "qcom,adreno" (since this
+  is what the device is matched on), in addition to the more specific
+  with the chip-id.
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the gpu.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "mem_iface_clk"
-- qcom,chipid: gpu chip-id.  Note this may become optional for future
-  devices if we can reliably read the chipid from hw
-- qcom,gpu-pwrlevels: list of operating points
-  - compatible: "qcom,gpu-pwrlevels"
-  - for each qcom,gpu-pwrlevel:
-    - qcom,gpu-freq: requested gpu clock speed
-    - NOTE: downstream android driver defines additional parameters to
-      configure memory bandwidth scaling per OPP.
+  * "core"
+  * "iface"
+  * "mem_iface"
 
 Example:
 
@@ -25,28 +21,18 @@ Example:
 	...
 
 	gpu: qcom,kgsl-3d0@4300000 {
-		compatible = "qcom,adreno-3xx";
+		compatible = "qcom,adreno-320.2", "qcom,adreno";
 		reg = <0x04300000 0x20000>;
 		reg-names = "kgsl_3d0_reg_memory";
 		interrupts = <GIC_SPI 80 0>;
 		interrupt-names = "kgsl_3d0_irq";
 		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "mem_iface_clk";
+		    "core",
+		    "iface",
+		    "mem_iface";
 		clocks =
 		    <&mmcc GFX3D_CLK>,
 		    <&mmcc GFX3D_AHB_CLK>,
 		    <&mmcc MMSS_IMEM_AHB_CLK>;
-		qcom,chipid = <0x03020100>;
-		qcom,gpu-pwrlevels {
-			compatible = "qcom,gpu-pwrlevels";
-			qcom,gpu-pwrlevel@0 {
-				qcom,gpu-freq = <450000000>;
-			};
-			qcom,gpu-pwrlevel@1 {
-				qcom,gpu-freq = <27000000>;
-			};
-		};
 	};
 };
diff --git a/dts/Bindings/display/msm/hdmi.txt b/dts/Bindings/display/msm/hdmi.txt
index 2ad578984f..2d306f402d 100644
--- a/dts/Bindings/display/msm/hdmi.txt
+++ b/dts/Bindings/display/msm/hdmi.txt
@@ -49,7 +49,7 @@ Required properties:
     * "hdmi_tx_l4"
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - core-vdda-supply: phandle to vdda regulator device node
 
 Example:
diff --git a/dts/Bindings/display/multi-inno,mi0283qt.txt b/dts/Bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000000..eed48c3d48
--- /dev/null
+++ b/dts/Bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:	"multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:	D/C pin. The presence/absence of this GPIO determines
+		the panel interface mode (IM[3:0] pins):
+		- present: IM=x110 4-wire 8-bit data serial interface
+		- absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:	Reset pin
+- power-supply:	A regulator node for the supply voltage.
+- backlight:	phandle of the backlight device attached to the panel
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	mi0283qt@0{
+		compatible = "multi-inno,mi0283qt";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		rotation = <90>;
+		dc-gpios = <&gpio 25 0>;
+		backlight = <&backlight>;
+	};
diff --git a/dts/Bindings/display/panel/boe,nv101wxmn51.txt b/dts/Bindings/display/panel/boe,nv101wxmn51.txt
new file mode 100644
index 0000000000..b258d6a91e
--- /dev/null
+++ b/dts/Bindings/display/panel/boe,nv101wxmn51.txt
@@ -0,0 +1,7 @@
+BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,nv101wxmn51"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/netron-dy,e231732.txt b/dts/Bindings/display/panel/netron-dy,e231732.txt
new file mode 100644
index 0000000000..c6d06b5eab
--- /dev/null
+++ b/dts/Bindings/display/panel/netron-dy,e231732.txt
@@ -0,0 +1,7 @@
+Netron-DY E231732 7.0" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "netron-dy,e231732"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/panel-dpi.txt b/dts/Bindings/display/panel/panel-dpi.txt
index b52ac52757..d4add13e59 100644
--- a/dts/Bindings/display/panel/panel-dpi.txt
+++ b/dts/Bindings/display/panel/panel-dpi.txt
@@ -12,7 +12,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/display/display-timing.txt)
+  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
 - Video port for DPI input
 
 Example
diff --git a/dts/Bindings/display/panel/panel.txt b/dts/Bindings/display/panel/panel.txt
new file mode 100644
index 0000000000..e2e6867852
--- /dev/null
+++ b/dts/Bindings/display/panel/panel.txt
@@ -0,0 +1,4 @@
+Common display properties
+-------------------------
+
+- rotation:	Display rotation in degrees counter clockwise (0,90,180,270)
diff --git a/dts/Bindings/display/panel/samsung,ld9040.txt b/dts/Bindings/display/panel/samsung,ld9040.txt
index fc595d9b98..354d4d1df4 100644
--- a/dts/Bindings/display/panel/samsung,ld9040.txt
+++ b/dts/Bindings/display/panel/samsung,ld9040.txt
@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
diff --git a/dts/Bindings/display/panel/samsung,s6e8aa0.txt b/dts/Bindings/display/panel/samsung,s6e8aa0.txt
index 25701c81b5..9e766c5f86 100644
--- a/dts/Bindings/display/panel/samsung,s6e8aa0.txt
+++ b/dts/Bindings/display/panel/samsung,s6e8aa0.txt
@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
diff --git a/dts/Bindings/display/panel/tianma,tm070jdhg30.txt b/dts/Bindings/display/panel/tianma,tm070jdhg30.txt
new file mode 100644
index 0000000000..eb9501a82e
--- /dev/null
+++ b/dts/Bindings/display/panel/tianma,tm070jdhg30.txt
@@ -0,0 +1,7 @@
+Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "tianma,tm070jdhg30"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt b/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt
index 01cced1c2a..47665a1278 100644
--- a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -35,7 +35,7 @@ Optional property for different chips:
 	       Required elements: "grf"
 
 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)
diff --git a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
index 668091f276..046076c6b2 100644
--- a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
@@ -1,24 +1,39 @@
-Rockchip specific extensions to the Synopsys Designware HDMI
-================================
+Rockchip DWC HDMI TX Encoder
+============================
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with a companion PHY IP.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
 
 Required properties:
-- compatible: "rockchip,rk3288-dw-hdmi";
-- reg: Physical base address and length of the controller's registers.
-- clocks: phandle to hdmi iahb and isfr clocks.
-- clock-names: should be "iahb" "isfr"
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+
+- compatible: Shall contain "rockchip,rk3288-dw-hdmi".
+- reg: See dw_hdmi.txt.
+- reg-io-width: See dw_hdmi.txt. Shall be 4.
 - interrupts: HDMI interrupt number
-- ports: contain a port node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. For
-  vopb,set the reg = <0> and set the reg = <1> for vopl.
-- reg-io-width: the width of the reg:1,4, the value should be 4 on
-  rk3288 platform
+- clocks: See dw_hdmi.txt.
+- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
+- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
+  corresponding to the video input of the controller. The port shall have two
+  endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
+- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
 
 Optional properties
-- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
+  or the functionally-reduced I2C master contained in the DWC HDMI. When
+  connected to a system I2C master this property contains a phandle to that
+  I2C master controller.
+- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
+- clock-names: May contain "cec" as defined in dw_hdmi.txt.
+
 
 Example:
+
 hdmi: hdmi@ff980000 {
 	compatible = "rockchip,rk3288-dw-hdmi";
 	reg = <0xff980000 0x20000>;
diff --git a/dts/Bindings/display/ssd1307fb.txt b/dts/Bindings/display/ssd1307fb.txt
index eb31ed47a2..209d931ef1 100644
--- a/dts/Bindings/display/ssd1307fb.txt
+++ b/dts/Bindings/display/ssd1307fb.txt
@@ -8,14 +8,15 @@ Required properties:
          0x3c or 0x3d
   - pwm: Should contain the pwm to use according to the OF device tree PWM
          specification [0]. Only required for the ssd1307.
-  - reset-gpios: Should contain the GPIO used to reset the OLED display
   - solomon,height: Height in pixel of the screen driven by the controller
   - solomon,width: Width in pixel of the screen driven by the controller
   - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
     mapped to.
 
 Optional properties:
-  - reset-active-low: Is the reset gpio is active on physical low?
+  - reset-gpios: The GPIO used to reset the OLED display, if available. See
+                 Documentation/devicetree/bindings/gpio/gpio.txt for details.
+  - vbat-supply: The supply for VBAT
   - solomon,segment-no-remap: Display needs normal (non-inverted) data column
                               to segment mapping
   - solomon,com-seq: Display uses sequential COM pin configuration
diff --git a/dts/Bindings/display/tilcdc/panel.txt b/dts/Bindings/display/tilcdc/panel.txt
index f20b31cdc5..808216310e 100644
--- a/dts/Bindings/display/tilcdc/panel.txt
+++ b/dts/Bindings/display/tilcdc/panel.txt
@@ -15,7 +15,7 @@ Required properties:
  - display-timings: typical videomode of lcd panel.  Multiple video modes
    can be listed if the panel supports multiple timings, but the 'native-mode'
    should be the preferred/default resolution.  Refer to
-   Documentation/devicetree/bindings/display/display-timing.txt for display
+   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
    timing binding details.
 
 Optional properties:
diff --git a/dts/Bindings/display/zte,vou.txt b/dts/Bindings/display/zte,vou.txt
index 740e5bd2e4..9c35628423 100644
--- a/dts/Bindings/display/zte,vou.txt
+++ b/dts/Bindings/display/zte,vou.txt
@@ -49,6 +49,15 @@ Required properties:
 	"osc_clk"
 	"xclk"
 
+* TV Encoder output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-tvenc"
+ - reg: Physical base address and length of the TVENC device IO region
+ - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two
+   integer cells.  The first cell is the offset of SYSCTRL register used
+   to control TV Encoder DAC power, and the second cell is the bit mask.
+
 Example:
 
 vou: vou@1440000 {
@@ -81,4 +90,10 @@ vou: vou@1440000 {
 			 <&topcrm HDMI_XCLK>;
 		clock-names = "osc_cec", "osc_clk", "xclk";
 	};
+
+	tvenc: tvenc@2000 {
+		compatible = "zte,zx296718-tvenc";
+		reg = <0x2000 0x1000>;
+		zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
+	};
 };