dts: update to v4.13-rc2

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

4 files changed, 40 insertions, 5 deletions

diff --git a/dts/Bindings/dma/arm-pl08x.txt b/dts/Bindings/dma/arm-pl08x.txt
index 8a0097a029..0ba81f7926 100644
--- a/dts/Bindings/dma/arm-pl08x.txt
+++ b/dts/Bindings/dma/arm-pl08x.txt
@@ -3,6 +3,11 @@
 Required properties:
 - compatible: "arm,pl080", "arm,primecell";
 	      "arm,pl081", "arm,primecell";
+	      "faraday,ftdmac020", "arm,primecell"
+- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
+  in the hardware and must be specified here as <0x0003b080>. This number
+  follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
+  for Faraday Technology.
 - reg: Address range of the PL08x registers
 - interrupt: The PL08x interrupt number
 - clocks: The clock running the IP core clock
@@ -20,8 +25,8 @@ Optional properties:
 - dma-requests: contains the total number of DMA requests supported by the DMAC
 - memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
   64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
-  values
+- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
+  values, the Faraday FTDMAC020 can also accept 64 bits
 
 Clients
 Required properties:
diff --git a/dts/Bindings/dma/brcm,iproc-sba.txt b/dts/Bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000000..092913a284
--- /dev/null
+++ b/dts/Bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+	      "brcm,iproc-sba"
+	      "brcm,iproc-sba-v2"
+  The "brcm,iproc-sba" has support for only 6 PQ coefficients
+  The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+	...
+	#mbox-cells = <3>;
+	...
+};
+
+raid0 {
+	compatible = "brcm,iproc-sba-v2";
+	mboxes = <&raid_mbox 0 0x1 0xffff>,
+		 <&raid_mbox 1 0x1 0xffff>,
+		 <&raid_mbox 2 0x1 0xffff>,
+		 <&raid_mbox 3 0x1 0xffff>,
+		 <&raid_mbox 4 0x1 0xffff>,
+		 <&raid_mbox 5 0x1 0xffff>,
+		 <&raid_mbox 6 0x1 0xffff>,
+		 <&raid_mbox 7 0x1 0xffff>;
+};
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt
index 3316a9c2e6..79a204d502 100644
--- a/dts/Bindings/dma/renesas,rcar-dmac.txt
+++ b/dts/Bindings/dma/renesas,rcar-dmac.txt
@@ -30,8 +30,9 @@ Required Properties:
 
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
+- interrupt-names: one entry for the error interrupt, named "error", plus one
+  entry per channel, named "ch%u", where %u is the channel number ranging from
+  zero to the number of channels minus one.
 
 - clock-names: "fck" for the functional clock
 - clocks: a list of phandle + clock-specifier pairs, one for each entry
diff --git a/dts/Bindings/dma/shdma.txt b/dts/Bindings/dma/shdma.txt
index 2a3f3b8946..a91920a494 100644
--- a/dts/Bindings/dma/shdma.txt
+++ b/dts/Bindings/dma/shdma.txt
@@ -1,6 +1,6 @@
 * SHDMA Device Tree bindings
 
-Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
 instances, capable of serving any of a common set of DMA slave devices, using
 the same configuration. To describe this topology we require all compatible
 SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible