dts: update to v4.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 125 insertions, 131 deletions

diff --git a/dts/Bindings/dma/mv-xor-v2.txt b/dts/Bindings/dma/mv-xor-v2.txt
new file mode 100644
index 0000000000..217a90eaab
--- /dev/null
+++ b/dts/Bindings/dma/mv-xor-v2.txt
@@ -0,0 +1,24 @@
+* Marvell XOR v2 engines
+
+Required properties:
+- compatible: one of the following values:
+    "marvell,armada-7k-xor"
+    "marvell,xor-v2"
+- reg: Should contain registers location and length (two sets)
+    the first set is the DMA registers
+    the second set is the global registers
+- msi-parent: Phandle to the MSI-capable interrupt controller used for
+  interrupts.
+
+Optional properties:
+- clocks: Optional reference to the clock used by the XOR engine.
+
+Example:
+
+	xor0@400000 {
+		compatible = "marvell,xor-v2";
+		reg = <0x400000 0x1000>,
+		      <0x410000 0x1000>;
+		msi-parent = <&gic_v2m0>;
+		dma-coherent;
+	};
diff --git a/dts/Bindings/dma/ti-edma.txt b/dts/Bindings/dma/ti-edma.txt
index 079b42a81d..18090e7226 100644
--- a/dts/Bindings/dma/ti-edma.txt
+++ b/dts/Bindings/dma/ti-edma.txt
@@ -15,7 +15,7 @@ Required properties:
 - reg:		Memory map of eDMA CC
 - reg-names:	"edma3_cc"
 - interrupts:	Interrupt lines for CCINT, MPERR and CCERRINT.
-- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
+- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
 - ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
 		<&tptc_phandle TC_priority_number>. The highest priority is 0.
 
@@ -48,7 +48,7 @@ edma: edma@49000000 {
 	reg =	<0x49000000 0x10000>;
 	reg-names = "edma3_cc";
 	interrupts = <12 13 14>;
-	interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
+	interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
 	dma-requests = <64>;
 	#dma-cells = <2>;
 
diff --git a/dts/Bindings/dma/xilinx/xilinx_dma.txt b/dts/Bindings/dma/xilinx/xilinx_dma.txt
index 3cf0072d31..a2b8bfaec4 100644
--- a/dts/Bindings/dma/xilinx/xilinx_dma.txt
+++ b/dts/Bindings/dma/xilinx/xilinx_dma.txt
@@ -1,46 +1,96 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
 Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
 target devices. It can be configured to have one channel or two channels.
 If configured as two channels, one is to transmit to the device and another
 is to receive from the device.
 
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
 Required properties:
-- compatible: Should be "xlnx,axi-dma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
+	      "xlnx,axi-cdma-1.00.a""
 - #dma-cells: Should be <1>, see "dmas" property below
-- reg: Should contain DMA registers location and length.
+- reg: Should contain VDMA registers location and length.
+- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
+- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
 - dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	FOR AXIDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
+
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
 
 Optional properties:
-- xlnx,include-sg: Tells whether configured for Scatter-mode in
+- xlnx,include-sg: Tells configured for Scatter-mode in
 	the hardware.
+Optional properties for AXI DMA:
+- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
+Optional properties for VDMA:
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+	It takes following values:
+	{1}, flush both channels
+	{2}, flush mm2s channel
+	{3}, flush s2mm channel
 
 Required child node properties:
-- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+- compatible:
+	For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
+	"xlnx,axi-vdma-s2mm-channel".
+	For CDMA: It should be "xlnx,axi-cdma-channel".
+	For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or
 	"xlnx,axi-dma-s2mm-channel".
-- interrupts: Should contain per channel DMA interrupts.
+- interrupts: Should contain per channel VDMA interrupts.
 - xlnx,datawidth: Should contain the stream data width, take values
 	{32,64...1024}.
 
-Option child node properties:
-- xlnx,include-dre: Tells whether hardware is configured for Data
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
 	Realignment Engine.
+Optional child node properties for VDMA:
+- xlnx,genlock-mode: Tells Genlock synchronization is
+	enabled/disabled in hardware.
+Optional child node properties for AXI DMA:
+-dma-channels: Number of dma channels in child node.
 
 Example:
 ++++++++
 
-axi_dma_0: axidma@40400000 {
-	compatible = "xlnx,axi-dma-1.00.a";
+axi_vdma_0: axivdma@40030000 {
+	compatible = "xlnx,axi-vdma-1.00.a";
 	#dma_cells = <1>;
-	reg = < 0x40400000 0x10000 >;
-	dma-channel@40400000 {
-		compatible = "xlnx,axi-dma-mm2s-channel";
-		interrupts = < 0 59 4 >;
+	reg = < 0x40030000 0x10000 >;
+	dma-ranges = <0x00000000 0x00000000 0x40000000>;
+	xlnx,num-fstores = <0x8>;
+	xlnx,flush-fsync = <0x1>;
+	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
+	dma-channel@40030000 {
+		compatible = "xlnx,axi-vdma-mm2s-channel";
+		interrupts = < 0 54 4 >;
 		xlnx,datawidth = <0x40>;
 	} ;
-	dma-channel@40400030 {
-		compatible = "xlnx,axi-dma-s2mm-channel";
-		interrupts = < 0 58 4 >;
+	dma-channel@40030030 {
+		compatible = "xlnx,axi-vdma-s2mm-channel";
+		interrupts = < 0 53 4 >;
 		xlnx,datawidth = <0x40>;
 	} ;
 } ;
@@ -49,7 +99,7 @@ axi_dma_0: axidma@40400000 {
 * DMA client
 
 Required properties:
-- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
 	where Channel ID is '0' for write/tx and '1' for read/rx
 	channel.
 - dma-names: a list of DMA channel names, one per "dmas" entry
@@ -57,9 +107,9 @@ Required properties:
 Example:
 ++++++++
 
-dmatest_0: dmatest@0 {
-	compatible ="xlnx,axi-dma-test-1.00.a";
-	dmas = <&axi_dma_0 0
-		&axi_dma_0 1>;
-	dma-names = "dma0", "dma1";
+vdmatest_0: vdmatest@0 {
+	compatible ="xlnx,axi-vdma-test-1.00.a";
+	dmas = <&axi_vdma_0 0
+		&axi_vdma_0 1>;
+	dma-names = "vdma0", "vdma1";
 } ;
diff --git a/dts/Bindings/dma/xilinx/xilinx_vdma.txt b/dts/Bindings/dma/xilinx/xilinx_vdma.txt
deleted file mode 100644
index a1f2683c49..0000000000
--- a/dts/Bindings/dma/xilinx/xilinx_vdma.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Xilinx AXI VDMA engine, it does transfers between memory and video devices.
-It can be configured to have one channel or two channels. If configured
-as two channels, one is to transmit to the video device and another is
-to receive from the video device.
-
-Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
-target devices. It can be configured to have one channel or two channels.
-If configured as two channels, one is to transmit to the device and another
-is to receive from the device.
-
-Xilinx AXI CDMA engine, it does transfers between memory-mapped source
-address and a memory-mapped destination address.
-
-Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
-	      "xlnx,axi-cdma-1.00.a""
-- #dma-cells: Should be <1>, see "dmas" property below
-- reg: Should contain VDMA registers location and length.
-- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
-- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
-- dma-channel child node: Should have at least one channel and can have up to
-	two channels per device. This node specifies the properties of each
-	DMA channel (see child node properties below).
-- clocks: Input clock specifier. Refer to common clock bindings.
-- clock-names: List of input clocks
-	For VDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
-			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
-	For CDMA:
-	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
-	FOR AXIDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-			   "m_axi_sg_aclk"
-
-Required properties for VDMA:
-- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
-
-Optional properties:
-- xlnx,include-sg: Tells configured for Scatter-mode in
-	the hardware.
-Optional properties for VDMA:
-- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
-	It takes following values:
-	{1}, flush both channels
-	{2}, flush mm2s channel
-	{3}, flush s2mm channel
-
-Required child node properties:
-- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
-	"xlnx,axi-vdma-s2mm-channel".
-- interrupts: Should contain per channel VDMA interrupts.
-- xlnx,datawidth: Should contain the stream data width, take values
-	{32,64...1024}.
-
-Optional child node properties:
-- xlnx,include-dre: Tells hardware is configured for Data
-	Realignment Engine.
-Optional child node properties for VDMA:
-- xlnx,genlock-mode: Tells Genlock synchronization is
-	enabled/disabled in hardware.
-
-Example:
-++++++++
-
-axi_vdma_0: axivdma@40030000 {
-	compatible = "xlnx,axi-vdma-1.00.a";
-	#dma_cells = <1>;
-	reg = < 0x40030000 0x10000 >;
-	dma-ranges = <0x00000000 0x00000000 0x40000000>;
-	xlnx,num-fstores = <0x8>;
-	xlnx,flush-fsync = <0x1>;
-	xlnx,addrwidth = <0x20>;
-	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
-	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
-	dma-channel@40030000 {
-		compatible = "xlnx,axi-vdma-mm2s-channel";
-		interrupts = < 0 54 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-	dma-channel@40030030 {
-		compatible = "xlnx,axi-vdma-s2mm-channel";
-		interrupts = < 0 53 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-} ;
-
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
-	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
-++++++++
-
-vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_vdma_0 0
-		&axi_vdma_0 1>;
-	dma-names = "vdma0", "vdma1";
-} ;
diff --git a/dts/Bindings/dma/xilinx/zynqmp_dma.txt b/dts/Bindings/dma/xilinx/zynqmp_dma.txt
new file mode 100644
index 0000000000..a784cdd947
--- /dev/null
+++ b/dts/Bindings/dma/xilinx/zynqmp_dma.txt
@@ -0,0 +1,27 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible		: Should be "xlnx,zynqmp-dma-1.0"
+- reg			: Memory map for gdma/adma module access.
+- interrupt-parent	: Interrupt controller the interrupt is routed through
+- interrupts		: Should contain DMA channel interrupt.
+- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
+- clock-names		: List of input clocks "clk_main", "clk_apb"
+			  (see clock bindings for details)
+
+Optional properties:
+- dma-coherent		: Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@fd500000 {
+	compatible = "xlnx,zynqmp-dma-1.0";
+	reg = <0x0 0xFD500000 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 117 4>;
+	clock-names = "clk_main", "clk_apb";
+	xlnx,bus-width = <128>;
+	dma-coherent;
+};