dts: update to v5.16-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 62 insertions, 45 deletions

diff --git a/dts/Bindings/gnss/u-blox,neo-6m.yaml b/dts/Bindings/gnss/u-blox,neo-6m.yaml
new file mode 100644
index 0000000000..396101a223
--- /dev/null
+++ b/dts/Bindings/gnss/u-blox,neo-6m.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-blox GNSS Receiver Device Tree Bindings
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: >
+  The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+properties:
+  compatible:
+    enum:
+      - u-blox,neo-6m
+      - u-blox,neo-8
+      - u-blox,neo-m8
+
+  reg:
+    description: >
+      The DDC Slave Address, SPI chip select address, the number of the USB hub
+      port or the USB host-controller port to which this device is attached,
+      depending on the bus used. Required for the DDC, SPI or USB busses.
+
+  vcc-supply:
+    description: >
+      Main voltage regulator
+
+  timepulse-gpios:
+    maxItems: 1
+    description: >
+      Time pulse GPIO
+
+  u-blox,extint-gpios:
+    maxItems: 1
+    description: >
+      GPIO connected to the "external interrupt" input pin
+  
+  v-bckp-supply:
+    description: >
+      Backup voltage regulator
+
+  current-speed: true
+
+required:
+  - compatible
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        gnss {
+            compatible = "u-blox,neo-8";
+            v-bckp-supply = <&gnss_v_bckp_reg>;
+            vcc-supply = <&gnss_vcc_reg>;
+        };
+    };
diff --git a/dts/Bindings/gnss/u-blox.txt b/dts/Bindings/gnss/u-blox.txt
deleted file mode 100644
index 7cdefd058f..0000000000
--- a/dts/Bindings/gnss/u-blox.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-u-blox GNSS Receiver DT binding
-
-The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"u-blox,neo-6m"
-			"u-blox,neo-8"
-			"u-blox,neo-m8"
-
-- vcc-supply	: Main voltage regulator
-
-Required properties (DDC):
-- reg		: DDC (I2C) slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Required properties (USB):
-- reg		: Number of the USB hub port or the USB host-controller port
-                  to which this device is attached
-
-Optional properties:
-
-- timepulse-gpios	: Time pulse GPIO
-- u-blox,extint-gpios	: GPIO connected to the "external interrupt" input pin
-- v-bckp-supply	: Backup voltage regulator
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		v-bckp-supply = <&gnss_v_bckp_reg>;
-		vcc-supply = <&gnss_vcc_reg>;
-	};
-};