Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 27 insertions, 0 deletions

diff --git a/dts/Bindings/gpio/gpio-palmas.txt b/dts/Bindings/gpio/gpio-palmas.txt
new file mode 100644
index 0000000000..08b5b52a3a
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-palmas.txt
@@ -0,0 +1,27 @@
+Palmas GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,palams-gpio" for palma series of the GPIO controller
+  - "ti,tps80036-gpio" for Palma series device TPS80036.
+  - "ti,tps65913-gpio" for palma series device TPS65913.
+  - "ti,tps65914-gpio" for palma series device TPS65914.
+- #gpio-cells : Should be two.
+  - first cell is the gpio pin number
+  - second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Note: This gpio node will be sub node of palmas node.
+
+Example:
+	palmas: tps65913@58 {
+		:::::::::::
+		palmas_gpio: palmas_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		:::::::::::
+	};