diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-05-06 08:56:43 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-05-06 08:56:43 +0200 |
commit | 461f8cfc7ea788428240271818363333ceff5c4c (patch) | |
tree | a3d6e3737c203ea29f8db2a6ddaadc326247376c /dts/Bindings/gpio/gpio.txt | |
parent | 6345d37ae50c3ac8dd0e6176bc846fe211cbddd4 (diff) | |
download | barebox-461f8cfc7ea788428240271818363333ceff5c4c.tar.gz barebox-461f8cfc7ea788428240271818363333ceff5c4c.tar.xz |
dts: update to v4.1-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/gpio/gpio.txt')
-rw-r--r-- | dts/Bindings/gpio/gpio.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/dts/Bindings/gpio/gpio.txt b/dts/Bindings/gpio/gpio.txt index f7a158d858..5788d5cf12 100644 --- a/dts/Bindings/gpio/gpio.txt +++ b/dts/Bindings/gpio/gpio.txt @@ -116,6 +116,29 @@ Every GPIO controller node must contain both an empty "gpio-controller" property, and a #gpio-cells integer property, which indicates the number of cells in a gpio-specifier. +The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism +providing automatic GPIO request and configuration as part of the +gpio-controller's driver probe function. + +Each GPIO hog definition is represented as a child node of the GPIO controller. +Required properties: +- gpio-hog: A property specifying that this child node represent a GPIO hog. +- gpios: Store the GPIO information (id, flags, ...). Shall contain the + number of cells specified in its parent node (GPIO controller + node). +Only one of the following properties scanned in the order shown below. +This means that when multiple properties are present they will be searched +in the order presented below and the first match is taken as the intended +configuration. +- input: A property specifying to set the GPIO direction as input. +- output-low A property specifying to set the GPIO direction as output with + the value low. +- output-high A property specifying to set the GPIO direction as output with + the value high. + +Optional properties: +- line-name: The GPIO label name. If not present the node name is used. + Example of two SOC GPIO banks defined as gpio-controller nodes: qe_pio_a: gpio-controller@1400 { @@ -123,6 +146,13 @@ Example of two SOC GPIO banks defined as gpio-controller nodes: reg = <0x1400 0x18>; gpio-controller; #gpio-cells = <2>; + + line_b { + gpio-hog; + gpios = <6 0>; + output-low; + line-name = "foo-bar-gpio"; + }; }; qe_pio_e: gpio-controller@1460 { |