dts: update to v4.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 5 insertions, 44 deletions

diff --git a/dts/Bindings/gpio/gpio-sx150x.txt b/dts/Bindings/gpio/gpio-sx150x.txt
deleted file mode 100644
index c809acb9c7..0000000000
--- a/dts/Bindings/gpio/gpio-sx150x.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-SEMTECH SX150x GPIO expander bindings
-
-
-Required properties:
-
-- compatible: should be "semtech,sx1506q",
-			"semtech,sx1508q",
-			"semtech,sx1509q",
-			"semtech,sx1502q".
-
-- reg: The I2C slave address for this device.
-
-- interrupt-parent: phandle of the parent interrupt controller.
-
-- interrupts: Interrupt specifier for the controllers interrupt.
-
-- #gpio-cells: Should be 2. The first cell is the GPIO number and the
-		second cell is used to specify optional parameters:
-		bit 0: polarity (0: normal, 1: inverted)
-
-- gpio-controller: Marks the device as a GPIO controller.
-
-- interrupt-controller: Marks the device as a interrupt controller.
-
-The GPIO expander can optionally be used as an interrupt controller, in
-which case it uses the default two cell specifier as described in
-Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-Example:
-
-	i2c_gpio_expander@20{
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "semtech,sx1506q";
-		reg = <0x20>;
-		interrupt-parent = <&gpio_1>;
-		interrupts = <16 0>;
-
-		gpio-controller;
-		interrupt-controller;
-	};
diff --git a/dts/Bindings/gpio/gpio_oxnas.txt b/dts/Bindings/gpio/gpio_oxnas.txt
index 928ed4f439..966514744d 100644
--- a/dts/Bindings/gpio/gpio_oxnas.txt
+++ b/dts/Bindings/gpio/gpio_oxnas.txt
@@ -3,7 +3,7 @@
 Please refer to gpio.txt for generic information regarding GPIO bindings.
 
 Required properties:
- - compatible: "oxsemi,ox810se-gpio"
+ - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio"
  - reg: Base address and length for the device.
  - interrupts: The port interrupt shared by all pins.
  - gpio-controller: Marks the port as GPIO controller.
diff --git a/dts/Bindings/gpio/mrvl-gpio.txt b/dts/Bindings/gpio/mrvl-gpio.txt
index c3d016532d..30fd2201b3 100644
--- a/dts/Bindings/gpio/mrvl-gpio.txt
+++ b/dts/Bindings/gpio/mrvl-gpio.txt
@@ -17,7 +17,9 @@ Required properties:
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be one.  It is the pin number.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify flags. See gpio.txt for possible
+  values.
 
 Example for a MMP platform:
 
@@ -27,7 +29,7 @@ Example for a MMP platform:
 		interrupts = <49>;
 		interrupt-names = "gpio_mux";
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };